FSTAB(5) MidnightBSD File Formats Manual FSTAB(5)

NAME

fstab — static information about the file systems

SYNOPSIS

#include <fstab.h>

DESCRIPTION

The file fstab contains descriptive information about the various file systems. fstab is only read by programs, and not written; it is the duty of the system administrator to properly create and maintain this file. Each file system is described on a separate line; fields on each line are separated by tabs or spaces. The order of records in fstab is important because fsck(8), mount(8), and umount(8) sequentially iterate through fstab doing their thing.

The first field, (fs_spec), describes the block special device or remote file system to be mounted. For file systems of type ufs, the special file name is the block special file name, and not the character special file name. If a program needs the character special file name, the program must create it by appending a ‘‘r’’ after the last ‘‘/’’ in the special file name.

The second field, (fs_file), describes the mount point for the file system. For swap partitions, this field should be specified as ‘‘none’’.

The third field, (fs_vfstype), describes the type of the file system. The system can support various file system types. Only the root, /usr, and /tmp file systems need be statically compiled into the kernel; everything else will be automatically loaded at mount time. (Exception: the UFS family - FFS and LFS cannot currently be demand-loaded.) Some people still prefer to statically compile other file systems as well.

The fourth field, (fs_mntops), describes the mount options associated with the file system. It is formatted as a comma separated list of options. It contains at least the type of mount (see fs_type below) plus any additional options appropriate to the file system type. See the options flag (−o) in the mount(8) page and the file system specific page, such as mount_nfs(8), for additional options that may be specified.

If the options ‘‘userquota’’ and/or ‘‘groupquota’’ are specified, the file system is automatically processed by the quotacheck(8) command, and user and/or group disk quotas are enabled with quotaon(8). By default, file system quotas are maintained in files named quota.user and quota.group which are located at the root of the associated file system. These defaults may be overridden by putting an equal sign and an alternative absolute pathname following the quota option. Thus, if the user quota file for /tmp is stored in /var/quotas/tmp.user, this location can be specified as:

userquota=/var/quotas/tmp.user

If the option ‘‘noauto’’ is specified, the file system will not be automatically mounted at system startup. Note that, for network file systems of third party types (i.e., types supported by additional software not included in the base system) to be automatically mounted at system startup, the extra_netfs_types rc.conf(5) variable must be used to extend the rc(8) startup script’s list of network file system types.

The type of the mount is extracted from the fs_mntops field and stored separately in the fs_type field (it is not deleted from the fs_mntops field). If fs_type is ‘‘rw’’ or ‘‘ro’’ then the file system whose name is given in the fs_file field is normally mounted read-write or read-only on the specified special file. If fs_type is ‘‘sw’’ then the special file is made available as a piece of swap space by the swapon(8) command at the end of the system reboot procedure. The fields other than fs_spec and fs_type are unused. If fs_type is specified as ‘‘xx’’ the entry is ignored. This is useful to show disk partitions which are currently unused.

The fifth field, (fs_freq), is used for these file systems by the dump(8) command to determine which file systems need to be dumped. If the fifth field is not present, a value of zero is returned and dump will assume that the file system does not need to be dumped.

The sixth field, (fs_passno), is used by the fsck(8) program to determine the order in which file system checks are done at reboot time. The root file system should be specified with a fs_passno of 1, and other file systems should have a fs_passno of 2. File systems within a drive will be checked sequentially, but file systems on different drives will be checked at the same time to utilize parallelism available in the hardware. If the sixth field is not present or is zero, a value of zero is returned and fsck(8) will assume that the file system does not need to be checked.

#define FSTAB_RW "rw" /* read/write device */

#define

FSTAB_RQ

"rq"

/* read/write with quotas */

#define

FSTAB_RO

"ro"

/* read-only device */

#define

FSTAB_SW

"sw"

/* swap device */

#define

FSTAB_XX

"xx"

/* ignore totally */

struct fstab {

char

*fs_spec;

/* block special device name */

char

*fs_file;

/* file system path prefix */

char

*fs_vfstype;

/* File system type, ufs, nfs */

char

*fs_mntops;

/* Mount options ala -o */

char

*fs_type;

/* FSTAB_* from fs_mntops */

int

fs_freq;

/* dump frequency, in days */

int

fs_passno;

/* pass number on parallel fsck */

};

The proper way to read records from fstab is to use the routines getfsent(3), getfsspec(3), getfstype(3), and getfsfile(3).

FILES
/etc/fstab

The file fstab resides in /etc.

SEE ALSO

getfsent(3), getvfsbyname(3), dump(8), fsck(8), mount(8), quotacheck(8), quotaon(8), swapon(8), umount(8)

HISTORY

The fstab file format appeared in 4.0BSD.

MidnightBSD 0.3 June 5, 1993 MidnightBSD 0.3