FWOHCI(4) MidnightBSD Kernel Interfaces Manual FWOHCI(4)

NAME

fwohci — OHCI FireWire chipset device driver

SYNOPSIS

kldload firewire

or

device firewire

HARDWARE

The fwohci driver provides support for PCI/CardBus FireWire interface cards. The driver supports the following IEEE 1394 OHCI chipsets:

Adaptec AHA-894x/AIC-5800

Apple Pangea

Apple UniNorth

Intel 82372FB

IOGEAR GUF320

Lucent / Agere FW322/323

NEC uPD72861

NEC uPD72870

NEC uPD72871/2

NEC uPD72873

NEC uPD72874

National Semiconductor CS4210

Ricoh R5C551

Ricoh R5C552

Sony CX3022

Sony i.LINK (CXD1947)

Sony i.LINK (CXD3222)

Sun PCIO-2 (RIO 1394)

Texas Instruments PCI4410A

Texas Instruments PCI4450

Texas Instruments PCI4451

Texas Instruments TSB12LV22

Texas Instruments TSB12LV23

Texas Instruments TSB12LV26

Texas Instruments TSB43AA22

Texas Instruments TSB43AB21/A/AI/A-EP

Texas Instruments TSB43AB22/A

Texas Instruments TSB43AB23

Texas Instruments TSB82AA2

VIA Fire II (VT6306)

SEE ALSO

firewire(4), fwe(4), fwip(4), sbp(4), fwcontrol(8), kldload(8)

HISTORY

The fwohci device driver first appeared in FreeBSD 5.0.

AUTHORS

The fwohci device driver was written by Katsushi Kobayashi and Hidetoshi Shimokawa.

BUGS

The driver allows physical access from any nodes on the bus by default. This means that any devices on the bus can read and modify any memory space which can be accessed by an IEEE 1394 OHCI chip. It is allowed mostly for sbp(4) devices. This should be changed to allow it only for specific devices. Anyway, FireWire is a bus and not expected to be connected with un-trustable devices because a node can monitor all the traffic.

MidnightBSD 0.3 June 23, 2005 MidnightBSD 0.3