MOUNT_NFS4(8) MidnightBSD System Manager’s Manual MOUNT_NFS4(8)

NAME

mount_nfs4 — mount NFSv4 file systems

SYNOPSIS

mount_nfs4 [−biNPsTU] [−a maxreadahead] [−D deadthresh] [−I readdirsize] [−o options] [−R retrycnt] [−t timeout] [−x retrans] rhost:path node

DESCRIPTION

The mount_nfs4 utility calls the mount(2) system call to prepare and graft a remote NFSv4 file system (rhost:path) on to the file system tree at the point node. This command is normally executed by mount(8). It implements the NFSv4 protocol as described in RFC 3530, NFS version 4 Protocol.

If the server becomes unresponsive while an NFSv4 file system is mounted, any new or outstanding file operations on that file system will hang uninterruptibly until the server comes back. To modify this default behaviour, see the −i and −s flags.

The options are:

−D

Set the ‘‘dead server threshold’’ to the specified number of round trip timeout intervals before a ‘‘server not responding’’ message is displayed.

−I

Set the readdir read size to the specified value. The value should normally be a multiple of DIRBLKSIZ that is ≤ the read size for the mount.

−N

Do not use a reserved socket port number (see below).

−P

Use a reserved socket port number. This flag is obsolete, and only retained for compatibility reasons. Reserved port numbers are used by default now. (For the rare case where the client has a trusted root account but untrustworthy users and the network cables are in secure areas this does help, but for normal desktop clients this does not apply.)

−R

Set the mount retry count to the specified value. The default is a retry count of zero, which means to keep retrying forever. There is a 60 second delay between each attempt.

−T

Use TCP transport. This is the default.

−U

Force the mount protocol to use UDP transport. This is not supported by the version 4 protocol and is provided only for debugging purposes.

−a

Set the read-ahead count to the specified value. This may be in the range of 0 - 4, and determines how many blocks will be read ahead when a large file is being read sequentially. Trying a value greater than 1 for this is suggested for mounts with a large bandwidth * delay product.

−b

If an initial attempt to contact the server fails, fork off a child to keep trying the mount in the background. Useful for fstab(5), where the file system mount is not critical to multiuser operation.

−i

Make the mount interruptible, which implies that file system calls that are delayed due to an unresponsive server will fail with EINTR when a termination signal is posted for the process.

−o

Options are specified with a −o flag followed by a comma separated string of options. See the mount(8) man page for possible options and their meanings. The following NFS specific options are also available:

port=〈port_number

Use specified port number for NFSv4 requests. The default is to use port 2049. Set this to 0 to query the portmapper for the NFSv4 port.

acregmin=〈seconds
acregmax
=〈seconds
acdirmin
=〈seconds
acdirmax
=〈seconds

When attributes of files are cached, a timeout calculated to determine whether a given cache entry has expired. These four values determine the upper and lower bounds of the timeouts for ‘‘directory’’ attributes and ‘‘regular’’ (i.e., everything else). The default values are 3 -> 60 seconds for regular files, and 30 -> 60 seconds for directories. The algorithm to calculate the timeout is based on the age of the file. The older the file, the longer the cache is considered valid, subject to the limits above.

noinet4, noinet6

Disables AF_INET or AF_INET6 connections. Useful for hosts that have both an A record and an AAAA record for the same name.

−s

A soft mount, which implies that file system calls will fail after retrycnt round trip timeout intervals.

−t

Set the initial retransmit timeout to the specified value. May be useful for fine tuning UDP mounts over internetworks with high packet loss rates or an overloaded server. Try increasing the interval if nfsstat(1) shows high retransmit rates while the file system is active or reducing the value if there is a low retransmit rate but long response delay observed. (Normally, the −d option should be specified when using this option to manually tune the timeout interval.)

−x

Set the retransmit timeout count for soft mounts to the specified value.

SEE ALSO

mount(2), unmount(2), fstab(5), idmapd(8), mount(8), mount_nfs(8), nfsd(8), nfsiod(8)

BUGS

This version of the NFSv4 client, while functional, is a long way from compliance with RFC 3530. It lacks lock state, reboot recovery, delegation, GSS, and many other mandatory items from the RFC.

MidnightBSD 0.3 November 14, 2003 MidnightBSD 0.3