SOUND(4) MidnightBSD Kernel Interfaces Manual SOUND(4)

NAME

sound, pcm, snd — FreeBSD PCM audio device infrastructure

SYNOPSIS

For a card with bridge driver support, and a PnP card:

device sound

For a card without bridge driver support, and a non-PnP card, the following lines may be required in /boot/device.hints:

hint.pcm.0.at="isa"
hint.pcm.0.irq="5"
hint.pcm.0.drq="1"
hint.pcm.0.flags="0x0"

DESCRIPTION

Note: There exists some ambiguity in the naming at the moment (sound, pcm, snd). It will be resolved soon by renaming device sound to device snd, and doing associated changes.

The sound driver provides support for PCM audio play and capture. This driver also supports various PCI, WSS/MSS compatible, ISA sound cards, and AC97 mixer. Once the sound driver attaches, supported devices provide audio record and playback channels. The FreeBSD sound system provides dynamic mixing ‘‘VCHAN’’ and rate conversion ‘‘soft formats’’. True full duplex operation is available on most cards.

If the sound card is supported by a bridge driver, the sound driver works in conjunction with the bridge driver.

Apart from the usual parameters, the flags field is used to specify the secondary DMA channel (generally used for capture in full duplex cards). Flags are set to 0 for cards not using a secondary DMA channel, or to 0x10 + C to specify channel C.

The driver does its best to recognize the installed hardware and drive it correctly so the user is not required to add several lines in /boot/device.hints. For PCI and ISA PnP cards this is actually easy since they identify themselves. For legacy ISA cards, the driver looks for MSS cards at addresses 0x530 and 0x604 (unless overridden in /boot/device.hints).

Boot Variables
In general, the module snd_foo corresponds to device snd_foo and can be loaded by the boot loader(8) via loader.conf(5) or from the command line using the kldload(8) utility. Options which can be specified in /boot/loader.conf include:

snd_driver_load

(‘‘NO’’) If set to ‘‘YES’’, this option loads all available drivers.

snd_emu10k1_load

(‘‘NO’’) If set to ‘‘YES’’, only the SoundBlaster 5.1 driver and dependent modules will be loaded.

snd_foo_load

(‘‘NO’’) If set to ‘‘YES’’, load driver for card/chipset foo.

To define default values for the different mixer channels, set the channel to the preferred value using hints, e.g.: hint.pcm.0.line="0". This will mute the input channel per default.

VCHANs
Each device can optionally support more playback channels than physical hardware provides by using ‘‘virtual channels’’ or VCHANs. VCHAN options can be configured via the sysctl(8) interface but can only be manipulated while the device is inactive.

Runtime Configuration
The following sysctl(8) variables are available:

hw.snd.pcm%d.buffersize

Configure the amount of DMA bufferspace available for a device.

hw.snd.targetirqrate

Set the default block size such that continuous playback will achieve this IRQ rate. This value can be tuned to improve application performance. Increase this value when the sound lags and decrease it if sound stutters or breaks up.

hw.snd.unit

When using devfs(5), the default device for /dev/dsp. Equivalent to a symlink from /dev/dsp to /dev/dsp${hw.snd.unit}.

hw.snd.report_soft_formats

Controls the internal format conversion if it is available transparently to the application software. When disabled or not available, the application will only be able to select formats the device natively supports.

hw.snd.verbose

Level of verbosity for the /dev/sndstat device. Higher values include more output and the highest level, three, should be used when reporting problems. Other options include:

0

Installed devices and their allocated bus resources.

1

The number of playback, record, virtual channels, and flags per device.

2

Channel information per device including the channel’s current format, speed, and pseudo device statistics such as buffer overruns and buffer underruns.

3

File names and versions of the currently sound loaded modules.

hw.snd.maxautovchans

Global VCHAN setting that only affects devices that have only one playback channel. The sound system will dynamically create up this many VCHANs. Set to ‘‘0’’ if no VCHANS are desired.

hw.snd.pcm%d.vchans

The current number of VCHANs allocated per device. This can be set to preallocate a certain number of VCHANs. Setting this value to ‘‘0’’ will disable VCHANs for this device.

Recording Channels
On devices that have more than one recording source (ie: mic and line), there is a corresponding /dev/dspr%d.%d device.

Statistics
Channel statistics are only kept while the device is open. So with situations involving overruns and underruns, consider the output while the errant application is open and running.

IOCTL Support
The driver supports most of the OSS ioctl() functions, and most applications work unmodified. A few differences exist, while memory mapped playback is supported natively and in Linux emulation, memory mapped recording is not due to VM system design. As a consequence, some applications may need to be recompiled with a slightly modified audio module. See <sys/soundcard.h> for a complete list of the supported ioctl() functions.

FILES

The sound drivers may create the following device nodes:

/dev/audio%d.%d

Sparc-compatible audio device.

/dev/dsp%d.%d

Digitized voice device.

/dev/dspW%d.%d

Like /dev/dsp, but 16 bits per sample.

/dev/dspr%d.%d

Should be connected to a record codec.

/dev/sndstat

Current sound status, including all channels and drivers.

The first number in the device node represents the unit number of the sound device. All sound devices are listed in /dev/sndstat. Additional messages are sometimes recorded when the device is probed and attached, these messages can be viewed with the dmesg(8) utility.

DIAGNOSTICS

ac97: dac not ready  AC97 codec is not likely to be accompanied with the sound card.

unsupported subdevice XX  A device node is not created properly.

SEE ALSO

snd_ad1816(4), snd_als4000(4), snd_atiixp(4), snd_audiocs(4), snd_cmi(4), snd_cs4281(4), snd_csa(4), snd_ds1(4), snd_emu10k1(4), snd_es137x(4), snd_ess(4), snd_fm801(4), snd_gusc(4), snd_ich(4), snd_maestro(4), snd_maestro3(4), snd_mss(4), snd_neomagic(4), snd_sbc(4), snd_solo(4), snd_t4dwave(4), snd_uaudio(4), snd_via8233(4), snd_via82c686(4), snd_vibes(4), devfs(5), loader.conf(5), dmesg(8), kldload(8), sysctl(8)

The OSS API

,

http://www.opensound.com/pguide/oss.pdf .

HISTORY

The sound device driver first appeared in FreeBSD 2.2.6 as pcm, written by Luigi Rizzo. It was later rewritten in FreeBSD 4.0 by Cameron Grant. The API evolved from the VOXWARE standard which later became OSS standard.

AUTHORS

Luigi Rizzo 〈luigi@iet.unipi.it〉 initially wrote the pcm device driver and this manual page. Cameron Grant 〈gandalf@vilnya.demon.co.uk〉 later revised the device driver for FreeBSD 4.0. Seigo Tanimura 〈tanimura@r.dl.itc.u-tokyo.ac.jp〉 revised this manual page. It was then rewritten for FreeBSD 5.2.

BUGS

Some features of your cards (e.g., global volume control) might not be supported on all devices.

MidnightBSD 0.3 November 28, 2005 MidnightBSD 0.3