[Midnightbsd-cvs] mports: bsd.gecko.mk: Moved from www/mozilla

[laffer1 at midnightbsd.org]

Log Message:
-----------
Moved from www/mozilla

Added Files:
-----------
    mports/Mk:
        bsd.gecko.mk (r1.1)

-------------- next part --------------
--- /dev/null
+++ Mk/bsd.gecko.mk
@@ -0,0 +1,169 @@
+#-*- mode: Fundamental; tab-width: 4; -*-
+# ex:ts=4
+#
+# $MidnightBSD: mports/Mk/bsd.gecko.mk,v 1.1 2008/10/14 20:33:42 laffer1 Exp $
+# $FreeBSD: ports/www/mozilla/bsd.gecko.mk,v 1.18 2006/11/01 13:20:10 ahze Exp $
+#    $MCom: ports-stable/www/mozilla/bsd.gecko.mk,v 1.3 2006/10/24 17:48:39 ahze Exp $
+#
+# 4 column tabs prevent hair loss and tooth decay!
+
+# bsd.gecko.mk abstracts the selection of gecko-based backends. It allows users
+# and porters to support any available gecko backend without needing to build
+# many conditional tests. ${USE_GECKO} is the list of backends that your port
+# can handle, and ${GECKO} is set by bsd.gecko.mk to be the chosen backend.
+# Users set ${WITH_GECKO} to the list of gecko backends they want on their system.
+
+.if defined(USE_GECKO)
+#.if defined(_POSTMKINCLUDED) && !defined(Gecko_Pre_Include)
+
+# Please make sure all changes to this file are passed through the maintainer.
+Gecko_Include_MAINTAINER=		ports at MidnightBSD.org
+Gecko_Pre_Include=			bsd.gecko.mk
+
+
+# Users should use the following syntax:
+#
+# WITH_GECKO= mozilla firefox seamonkey
+#  Use mozilla whenever a port supports it, falling back on firefox and
+#  then seamonkey.
+# WITH_GECKO= firefox
+#  Sets your preferred backend. With this example, firefox will always
+#  be chosen, unless the port doesn't support a firefox backend. In that
+#  case, you get whatever the porter chose as the default. Better to use
+#  the first example.
+#
+#
+# Ports should use the following:
+#
+# USE_GECKO= mozilla firefox seamonkey
+#  The list of gecko backends that the port supports. Unless the user
+#  overrides it with WITH_GECKO, the first gecko listed in USE_GECKO
+#  will be the default. In the above example, www/mozilla will be used
+#  as a gecko backend unless WITH_GECKO=firefox or WITH_GECKO=seamonkey
+#  is defined by the user.
+#
+# USE_GECKO= firefox-devel<->firefox
+#  This will sed -e 's/firefox/firefox-devel/' on Makefile.in's and configure 
+#  if ${GECKO}=="firefox-devel"
+#
+#  Example:
+#  USE_GECKO= mozilla firefox seamonkey
+#  .include <bsd.port.pre.mk>
+#  .include "${.CURDIR}/../../www/mozilla/bsd.gecko.mk"
+#  post-patch:
+#	@${REINPALCE_CMD} -e 's|mozilla-|${GECKO}-|' \
+#		${WRKSRC}/configure
+#
+#  If you want your port to check the ${GECKO} variable to see which backend
+#  has been chosen.
+#
+#  Example:
+#  USE_GECKO= mozilla firefox seamonkey
+#  .include <bsd.port.pre.mk>
+#  .include "${.CURDIR}/../../www/mozilla/bsd.gecko.mk"
+#  post-patch:
+#  .if ${GECKO}=="seamonkey"
+#	@${REINPLACE_CMD} -e 's|mozilla-|seamonkey-|' \
+#		${WRKSRC}/configure
+#  .endif
+
+.if ${ARCH}!="sparc64"
+_GECKO_ALL=	browser firefox nvu seamonkey thunderbird xulrunner flock
+.endif
+_GECKO_ALL+=	mozilla
+
+thunderbird_PORTSDIR=	mail
+
+.for gecko in ${_GECKO_ALL}
+${gecko}_PORTSDIR?=	www
+${gecko}_DEPENDS?=	${PORTSDIR}/${${gecko}_PORTSDIR}/${gecko}
+${gecko}_PLIST?=	${LOCALBASE}/lib/${gecko}/libgtkembedmoz.so
+.endfor
+
+# Figure out which mozilla to use
+# Weed out bad options in USE_GECKO
+.for badgecko in ${USE_GECKO}
+. if ${_GECKO_ALL:M${badgecko:C/^([^<->]+).*/\1/}}!=""
+GOOD_USE_GECKO+=	${badgecko:C/^([^<->]+).*/\1/}
+. endif
+. if ${_GECKO_ALL:M${badgecko:C/^[^<->]+<->([^<->]+).*/\1/}}!="${badgecko:C/^([^<->]+).*/\1/}"
+${badgecko:C/^([^<->]+).*/\1/}_HACK=	s:${badgecko:C/^[^<->]+<->([^<->]+).*/\1/}:${badgecko:C/^([^<->]+).*/\1/}:g
+. endif
+.endfor
+
+.undef GECKO_FALLTHROUGH
+.undef _FOUND_WITH_GECKO
+# Figure out which gecko to use and weed out the bad ones
+.if defined(WITH_GECKO) && defined(GOOD_USE_GECKO)
+. for badgecko in ${WITH_GECKO}
+.  if ${GOOD_USE_GECKO:M${badgecko}}!=""
+GOOD_WITH_GECKO+=	${badgecko}
+.  endif
+. endfor
+. if defined(GOOD_WITH_GECKO)
+.  for gecko in ${GOOD_WITH_GECKO}
+.   if !defined(GECKO_FALLTHROUGH)
+GECKO=	${gecko}
+GECKO_FALLTHROUGH=	${TRUE}
+_FOUND_WITH_GECKO=	${TRUE}
+.   endif
+.  endfor
+. endif
+.endif
+
+.if !defined(GECKO) && defined(GOOD_USE_GECKO)
+. for gecko in ${GOOD_USE_GECKO}
+.  if !defined(GECKO_FALLTRHOUGH)
+GECKO=	${gecko}
+GECKO_FALLTRHOUGH=	${TRUE}
+.  endif
+. endfor
+.endif
+
+# Generic defines
+BROWSER_LINUX_PLUGINS_DIR?=	${LOCALBASE}/lib/browser_linux_plugins
+BROWSER_PLUGINS_DIR?=		${LOCALBASE}/lib/browser_plugins
+
+GECKO_CONFIG?=			${LOCALBASE}/bin/${GECKO}-config
+XPIDL?=				${LOCALBASE}/lib/${GECKO}/xpidl
+XPIDL_INCL?=			`${GECKO_CONFIG} --idlflags`
+
+.if defined(GECKO) && ${_GECKO_ALL:M${GECKO}}!=""
+BUILD_DEPENDS+=	${${GECKO}_PLIST}:${${GECKO}_DEPENDS}
+RUN_DEPENDS+=	${${GECKO}_PLIST}:${${GECKO}_DEPENDS}
+.else
+IGNORE=	Unable to find a supported gecko, please check USE_GECKO
+.endif
+
+pre-everything:: _gecko-pre-everything
+
+_gecko-pre-everything::
+	@${ECHO_CMD} ""
+.if !defined(_FOUND_WITH_GECKO) && defined(WITH_GECKO)
+	@${ECHO_CMD} " Warning: ${PORTNAME} does not support any gecko you"
+	@${ECHO_CMD} " listed in WITH_GECKO=${WITH_GECKO}."
+	@${ECHO_CMD} " \"${GECKO}\" will be used"
+	@${ECHO_CMD} ""
+	@${ECHO_CMD} " for gecko support, but you can change that by using one of"
+	@${ECHO_CMD} " the following values:"
+.else
+	@${ECHO_CMD} " ${PORTNAME} is using ${GECKO} for gecko support, but you can"
+	@${ECHO_CMD} " change that by defining WITH_GECKO to the following values:"
+.endif
+	@${ECHO_CMD} ""
+.for gecko in ${GOOD_USE_GECKO}
+	@${ECHO_CMD} "   ${gecko} "
+.endfor
+	@${ECHO_CMD} ""
+
+post-patch: gecko-post-patch
+
+gecko-post-patch:
+.if defined(${GECKO}_HACK)
+	${FIND} ${WRKSRC} -name "Makefile.in" -type f -o -name "configure" -type f | \
+		${XARGS} ${REINPLACE_CMD} -e ${${GECKO}_HACK}
+.endif
+
+#.endif # end it all
+.endif
+# HERE THERE BE TACOS