[Midnightbsd-cvs] src: src/usr.sbin: There is no point in keeping this.
laffer1 at midnightbsd.org
laffer1 at midnightbsd.org
Mon Apr 28 00:38:18 EDT 2008
Log Message:
-----------
There is no point in keeping this. You can do the functionality with ifconfig.
Modified Files:
--------------
src/usr.sbin:
Makefile (r1.5 -> r1.6)
Removed Files:
-------------
src/usr.sbin/wicontrol:
Makefile
wicontrol.8
wicontrol.c
-------------- next part --------------
Index: Makefile
===================================================================
RCS file: /home/cvs/src/usr.sbin/Makefile,v
retrieving revision 1.5
retrieving revision 1.6
diff -L usr.sbin/Makefile -L usr.sbin/Makefile -u -r1.5 -r1.6
--- usr.sbin/Makefile
+++ usr.sbin/Makefile
@@ -174,7 +174,6 @@
vnconfig \
watch \
watchdogd \
- wicontrol \
${_wlconfig} \
wpa \
${_ypbind} \
--- usr.sbin/wicontrol/wicontrol.c
+++ /dev/null
@@ -1,1239 +0,0 @@
-/*
- * Copyright (c) 1997, 1998, 1999
- * Bill Paul <wpaul at ctr.columbia.edu>. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- * must display the following acknowledgement:
- * This product includes software developed by Bill Paul.
- * 4. Neither the name of the author nor the names of any co-contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
- * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
- * THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#if 0
-#ifndef lint
-static const char copyright[] = "@(#) Copyright (c) 1997, 1998, 1999\
- Bill Paul. All rights reserved.";
-#endif /* not lint */
-#endif
-#include <sys/cdefs.h>
-__FBSDID("$FreeBSD: src/usr.sbin/wicontrol/wicontrol.c,v 1.38 2004/10/17 21:29:53 stefanf Exp $");
-
-#include <sys/types.h>
-#include <sys/cdefs.h>
-#include <sys/param.h>
-#include <sys/socket.h>
-#include <sys/ioctl.h>
-#include <sys/socket.h>
-
-#include <net/if.h>
-#include <net/if_var.h>
-#include <net/ethernet.h>
-
-#include <net80211/ieee80211.h>
-#include <net80211/ieee80211_ioctl.h>
-#include <dev/wi/if_wavelan_ieee.h>
-#include <dev/wi/if_wireg.h>
-
-#include <stdio.h>
-#include <string.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <ctype.h>
-#include <errno.h>
-#include <err.h>
-
-static int wi_getval(const char *, struct wi_req *);
-static int wi_getvalmaybe(const char *, struct wi_req *);
-static void wi_setval(const char *, struct wi_req *);
-static void wi_printstr(struct wi_req *);
-static void wi_setstr(const char *, int, char *);
-static void wi_setbytes(const char *, int, char *, int);
-static void wi_setword(const char *, int, int);
-static void wi_sethex(const char *, int, char *);
-static void wi_printwords(struct wi_req *);
-static void wi_printbool(struct wi_req *);
-static void wi_printhex(struct wi_req *);
-static void wi_printaps(struct wi_req *);
-static void wi_dumpinfo(const char *);
-static void wi_dumpstats(const char *);
-static void wi_setkeys(const char *, char *, int);
-static void wi_printkeys(struct wi_req *);
-static void wi_printaplist(const char *);
-static int wi_hex2int(char);
-static void wi_str2key(char *, struct wi_key *);
-#ifdef WICACHE
-static void wi_zerocache(const char *);
-static void wi_readcache(const char *);
-#endif
-static void usage(const char *);
-static int listaps;
-static int quiet;
-
-/*
- * Print a value a la the %b format of the kernel's printf
- * (ripped screaming from ifconfig/ifconfig.c)
- */
-void
-printb(char *s, uint32_t v, char *bits)
-{
- int i, any = 0;
- char c;
-
- if (bits && *bits == 8)
- printf("%s=%o", s, v);
- else
- printf("%s=%x", s, v);
- bits++;
- if (bits) {
- putchar('<');
- while ((i = *bits++)) {
- if (v & (1 << (i-1))) {
- if (any)
- putchar(',');
- any = 1;
- for (; (c = *bits) > 32; bits++)
- putchar(c);
- } else
- for (; *bits > 32; bits++)
- ;
- }
- putchar('>');
- }
-}
-
-static int
-_wi_getval(const char *iface, struct wi_req *wreq)
-{
- struct ifreq ifr;
- int s;
- int retval;
-
- bzero((char *)&ifr, sizeof(ifr));
-
- strlcpy(ifr.ifr_name, iface, sizeof(ifr.ifr_name));
- ifr.ifr_data = (caddr_t)wreq;
-
- s = socket(AF_INET, SOCK_DGRAM, 0);
- if (s == -1)
- err(1, "socket");
- retval = ioctl(s, SIOCGWAVELAN, &ifr);
- close(s);
-
- return (retval);
-}
-
-static int
-wi_getval(const char *iface, struct wi_req *wreq)
-{
- if (_wi_getval(iface, wreq) == -1) {
- if (errno != EINPROGRESS)
- err(1, "SIOCGWAVELAN");
- return (-1);
- }
- return (0);
-}
-
-static int
-wi_getvalmaybe(const char *iface, struct wi_req *wreq)
-{
- if (_wi_getval(iface, wreq) == -1) {
- if (errno != EINPROGRESS && errno != EINVAL)
- err(1, "SIOCGWAVELAN");
- return (-1);
- }
- return (0);
-}
-
-static void
-wi_setval(const char *iface, struct wi_req *wreq)
-{
- struct ifreq ifr;
- int s;
-
- bzero((char *)&ifr, sizeof(ifr));
-
- strlcpy(ifr.ifr_name, iface, sizeof(ifr.ifr_name));
- ifr.ifr_data = (caddr_t)wreq;
-
- s = socket(AF_INET, SOCK_DGRAM, 0);
-
- if (s == -1)
- err(1, "socket");
-
- if (ioctl(s, SIOCSWAVELAN, &ifr) == -1)
- err(1, "SIOCSWAVELAN");
-
- close(s);
-
- return;
-}
-
-void
-wi_printstr(struct wi_req *wreq)
-{
- char *ptr;
- int i;
-
- if (wreq->wi_type == WI_RID_SERIALNO) {
- ptr = (char *)&wreq->wi_val;
- for (i = 0; i < (wreq->wi_len - 1) * 2; i++) {
- if (ptr[i] == '\0')
- ptr[i] = ' ';
- }
- } else {
- ptr = (char *)&wreq->wi_val[1];
- for (i = 0; i < wreq->wi_val[0]; i++) {
- if (ptr[i] == '\0')
- ptr[i] = ' ';
- }
- }
-
- ptr[i] = '\0';
- printf("[ %s ]", ptr);
-
- return;
-}
-
-void
-wi_setstr(const char *iface, int code, char *str)
-{
- struct wi_req wreq;
-
- if (iface == NULL)
- errx(1, "must specify interface name");
-
- if (str == NULL)
- errx(1, "must specify string");
-
- bzero((char *)&wreq, sizeof(wreq));
-
- if (strlen(str) > 30)
- errx(1, "string too long");
-
- wreq.wi_type = code;
- wreq.wi_len = 18;
- wreq.wi_val[0] = strlen(str);
- bcopy(str, (char *)&wreq.wi_val[1], strlen(str));
-
- wi_setval(iface, &wreq);
-
- return;
-}
-
-void
-wi_setbytes(const char *iface, int code, char *bytes, int len)
-{
- struct wi_req wreq;
-
- if (iface == NULL)
- errx(1, "must specify interface name");
-
- bzero((char *)&wreq, sizeof(wreq));
-
- wreq.wi_type = code;
- wreq.wi_len = (len / 2) + 1;
- bcopy(bytes, (char *)&wreq.wi_val[0], len);
-
- wi_setval(iface, &wreq);
-
- return;
-}
-
-void
-wi_setword(const char *iface, int code, int word)
-{
- struct wi_req wreq;
-
- bzero((char *)&wreq, sizeof(wreq));
-
- wreq.wi_type = code;
- wreq.wi_len = 2;
- wreq.wi_val[0] = word;
-
- wi_setval(iface, &wreq);
-
- return;
-}
-
-void
-wi_sethex(const char *iface, int code, char *str)
-{
- struct ether_addr *addr;
-
- if (str == NULL)
- errx(1, "must specify address");
-
- addr = ether_aton(str);
-
- if (addr == NULL)
- errx(1, "badly formatted address");
-
- wi_setbytes(iface, code, (char *)addr, ETHER_ADDR_LEN);
-
- return;
-}
-
-static int
-wi_hex2int(char c)
-{
- if (c >= '0' && c <= '9')
- return (c - '0');
- if (c >= 'A' && c <= 'F')
- return (c - 'A' + 10);
- if (c >= 'a' && c <= 'f')
- return (c - 'a' + 10);
-
- return (0);
-}
-
-static void
-wi_str2key(char *s, struct wi_key *k)
-{
- int n, i;
- char *p;
-
- /* Is this a hex string? */
- if (s[0] == '0' && (s[1] == 'x' || s[1] == 'X')) {
- /* Yes, convert to int. */
- n = 0;
- p = (char *)&k->wi_keydat[0];
- for (i = 2; s[i] != '\0' && s[i + 1] != '\0'; i+= 2) {
- *p++ = (wi_hex2int(s[i]) << 4) + wi_hex2int(s[i + 1]);
- n++;
- }
- if (s[i] != '\0')
- errx(1, "hex strings must be of even length");
- k->wi_keylen = n;
- } else {
- /* No, just copy it in. */
- bcopy(s, k->wi_keydat, strlen(s));
- k->wi_keylen = strlen(s);
- }
-
- return;
-}
-
-static void
-wi_setkeys(const char *iface, char *key, int idx)
-{
- int keylen;
- struct wi_req wreq;
- struct wi_ltv_keys *keys;
- struct wi_key *k;
- int has_wep;
-
- bzero((char *)&wreq, sizeof(wreq));
- wreq.wi_len = WI_MAX_DATALEN;
- wreq.wi_type = WI_RID_WEP_AVAIL;
-
- if (wi_getval(iface, &wreq) == 0)
- has_wep = wreq.wi_val[0];
- else
- has_wep = 0;
- if (!has_wep)
- errx(1, "no WEP option available on this card");
-
- bzero((char *)&wreq, sizeof(wreq));
- wreq.wi_len = WI_MAX_DATALEN;
- wreq.wi_type = WI_RID_DEFLT_CRYPT_KEYS;
-
- if (wi_getval(iface, &wreq) == -1)
- errx(1, "Cannot get default key index");
- keys = (struct wi_ltv_keys *)&wreq;
-
- keylen = strlen(key);
- if (key[0] == '0' && (key[1] == 'x' || key[1] == 'X')) {
- if (keylen != 2 && keylen != 12 && keylen != 28) {
- errx(1, "encryption key must be 0, 10, or 26 "
- "hex digits long");
- }
- } else {
- if (keylen != 0 && keylen != 5 && keylen != 13) {
- errx(1, "encryption key must be 0, 5, or 13 "
- "bytes long");
- }
- }
-
- if (idx > 3)
- errx(1, "only 4 encryption keys available");
-
- k = &keys->wi_keys[idx];
- wi_str2key(key, k);
-
- wreq.wi_len = (sizeof(struct wi_ltv_keys) / 2) + 1;
- wreq.wi_type = WI_RID_DEFLT_CRYPT_KEYS;
- wi_setval(iface, &wreq);
-
- return;
-}
-
-static void
-wi_printkeys(struct wi_req *wreq)
-{
- int i, j;
- int isprintable;
- struct wi_key *k;
- struct wi_ltv_keys *keys;
- char *ptr;
-
- keys = (struct wi_ltv_keys *)wreq;
-
- for (i = 0; i < 4; i++) {
- k = &keys->wi_keys[i];
- ptr = (char *)k->wi_keydat;
- isprintable = 1;
- for (j = 0; j < k->wi_keylen; j++) {
- if (!isprint(ptr[j])) {
- isprintable = 0;
- break;
- }
- }
- if (isprintable) {
- ptr[j] = '\0';
- printf("[ %s ]", ptr);
- } else {
- printf("[ 0x");
- for (j = 0; j < k->wi_keylen; j++) {
- printf("%02x", ptr[j] & 0xFF);
- }
- printf(" ]");
-
- }
- }
-
- return;
-}
-
-void
-wi_printwords(struct wi_req *wreq)
-{
- int i;
-
- printf("[ ");
- for (i = 0; i < wreq->wi_len - 1; i++)
- printf("%d ", wreq->wi_val[i]);
- printf("]");
-
- return;
-}
-
-void
-wi_printswords(struct wi_req *wreq)
-{
- int i;
-
- printf("[ ");
- for (i = 0; i < wreq->wi_len - 1; i++)
- printf("%d ", ((int16_t *) wreq->wi_val)[i]);
- printf("]");
-
- return;
-}
-
-void
-wi_printhexwords(struct wi_req *wreq)
-{
- int i;
-
- printf("[ ");
- for (i = 0; i < wreq->wi_len - 1; i++)
- printf("%x ", wreq->wi_val[i]);
- printf("]");
-
- return;
-}
-
-void
-wi_printregdoms(struct wi_req *wreq)
-{
- int i;
- struct wi_ltv_domains *regdom = (struct wi_ltv_domains *)wreq;
-
- printf("[ ");
- for (i = 0; i < regdom->wi_num_dom; i++) {
- switch (regdom->wi_domains[i]) {
- case 0x10: printf("usa"); break;
- case 0x20: printf("canada"); break;
- case 0x30: printf("eu/au"); break;
- case 0x31: printf("es"); break;
- case 0x32: printf("fr"); break;
- case 0x40: printf("jp"); break;
- case 0x41: printf("jp new"); break;
- default: printf("0x%x", regdom->wi_domains[i]); break;
- }
- if (i < regdom->wi_num_dom - 1)
- printf(", ");
- }
- printf(" ]");
-
- return;
-}
-
-void
-wi_printbool(struct wi_req *wreq)
-{
- if (wreq->wi_val[0])
- printf("[ On ]");
- else
- printf("[ Off ]");
-
- return;
-}
-
-void
-wi_printhex(struct wi_req *wreq)
-{
- int i;
- unsigned char *c;
-
- c = (unsigned char *)&wreq->wi_val;
-
- printf("[ ");
- for (i = 0; i < (wreq->wi_len - 1) * 2; i++) {
- printf("%02x", c[i]);
- if (i < ((wreq->wi_len - 1) * 2) - 1)
- printf(":");
- }
-
- printf(" ]");
- return;
-}
-
-static float
-get_wiaprate(int inrate)
-{
- float rate;
-
- switch (inrate) {
- case WI_APRATE_1:
- rate = 1;
- break;
- case WI_APRATE_2:
- rate = 2;
- break;
- case WI_APRATE_5:
- rate = 5.5;
- break;
- case WI_APRATE_11:
- rate = 11;
- break;
-#ifdef WI_APRATE_0
- case WI_APRATE_0:
-#endif
- default:
- rate = 0;
- break;
- }
-
- return (rate);
-}
-
-void
-wi_printaplist(const char *iface)
-{
- int prism2, len, i = 0, j, r;
- struct wi_req wreq;
- struct wi_scan_p2_hdr *wi_p2_h;
- struct wi_scan_res *res;
- float rate;
-
- if (!quiet)
- printf("Available APs:\n");
-
- /* first determine if this is a prism2 card or not */
- wreq.wi_len = WI_MAX_DATALEN;
- wreq.wi_type = WI_RID_PRISM2;
-
- if (wi_getval(iface, &wreq) == 0)
- prism2 = wreq.wi_val[0];
- else
- prism2 = 0;
-
- /* send out a scan request */
- wreq.wi_len = prism2 ? 3 : 1;
- wreq.wi_type = WI_RID_SCAN_REQ;
-
- if (prism2) {
- wreq.wi_val[0] = 0x3FFF;
- wreq.wi_val[1] = 0x000F;
- }
-
- wi_setval(iface, &wreq);
-
- do {
- /*
- * sleep for 100 milliseconds so there's enough time for the card to
- * respond... prism2's take a little longer.
- */
- usleep(prism2 ? 500000 : 100000);
-
- /* get the scan results */
- wreq.wi_len = WI_MAX_DATALEN;
- wreq.wi_type = WI_RID_SCAN_RES;
- } while (wi_getval(iface, &wreq) == -1 && errno == EINPROGRESS);
-
- if (prism2) {
- wi_p2_h = (struct wi_scan_p2_hdr *)wreq.wi_val;
-
- /* if the reason is 0, this info is invalid */
- if (wi_p2_h->wi_reason == 0)
- return;
-
- i = 4;
- }
-
- len = prism2 ? WI_PRISM2_RES_SIZE : WI_WAVELAN_RES_SIZE;
-
- if (!quiet) {
- int nstations = ((wreq.wi_len * 2) - i) / len;
- printf("%d station%s:\n", nstations, nstations == 1 ? "" : "s");
- printf("%-16.16s BSSID Chan SN S N Intrvl Capinfo\n", "SSID");
- }
- for (; i < (wreq.wi_len * 2) - len; i += len) {
- res = (struct wi_scan_res *)((char *)wreq.wi_val + i);
-
- res->wi_ssid[res->wi_ssid_len] = '\0';
-
- printf("%-16.16s [ %02x:%02x:%02x:%02x:%02x:%02x ] [ %-2d ] "
- "[ %2d %2d %2d ] %3d ", res->wi_ssid,
- res->wi_bssid[0], res->wi_bssid[1], res->wi_bssid[2],
- res->wi_bssid[3], res->wi_bssid[4], res->wi_bssid[5],
- res->wi_chan, res->wi_signal - res->wi_noise,
- res->wi_signal, res->wi_noise, res->wi_interval);
-
- if (!quiet && res->wi_capinfo) {
- printf("[ ");
- if (res->wi_capinfo & WI_CAPINFO_ESS)
- printf("ess ");
- if (res->wi_capinfo & WI_CAPINFO_IBSS)
- printf("ibss ");
- if (res->wi_capinfo & IEEE80211_CAPINFO_CF_POLLABLE)
- printf("cfp ");
- if (res->wi_capinfo & IEEE80211_CAPINFO_CF_POLLREQ)
- printf("cfpr ");
- if (res->wi_capinfo & WI_CAPINFO_PRIV)
- printf("priv ");
- if (res->wi_capinfo & IEEE80211_CAPINFO_SHORT_PREAMBLE)
- printf("shpr ");
- if (res->wi_capinfo & IEEE80211_CAPINFO_PBCC)
- printf("pbcc ");
- if (res->wi_capinfo & IEEE80211_CAPINFO_CHNL_AGILITY)
- printf("chna ");
- if (res->wi_capinfo & IEEE80211_CAPINFO_SHORT_SLOTTIME)
- printf("shst ");
- if (res->wi_capinfo & IEEE80211_CAPINFO_DSSSOFDM)
- printf("ofdm ");
- printf("] ");
- }
-
- if (prism2 && res->wi_srates[0] != 0) {
- printf("\n%16s [ ", "");
- for (j = 0; j < 10 && res->wi_srates[j] != 0; j++) {
- r = res->wi_srates[j] & IEEE80211_RATE_VAL;
- if (r & 1)
- printf("%d.%d", r / 2, (r % 2) * 5);
- else
- printf("%d", r / 2);
- printf("%s ", res->wi_srates[j] & IEEE80211_RATE_BASIC ? "b" : "");
- }
- printf("] ");
- rate = get_wiaprate(res->wi_rate);
- if (rate)
- printf("* %2.1f *\n", rate);
- }
- putchar('\n');
- }
-}
-
-#define WI_STRING 0x01
-#define WI_BOOL 0x02
-#define WI_WORDS 0x03
-#define WI_HEXBYTES 0x04
-#define WI_KEYSTRUCT 0x05
-#define WI_SWORDS 0x06
-#define WI_HEXWORDS 0x07
-#define WI_REGDOMS 0x08
-
-struct wi_table {
- int wi_code;
- int wi_type;
- const char *wi_str;
-};
-
-static struct wi_table wi_table[] = {
- { WI_RID_SERIALNO, WI_STRING, "NIC serial number:\t\t\t" },
- { WI_RID_NODENAME, WI_STRING, "Station name:\t\t\t\t" },
- { WI_RID_OWN_SSID, WI_STRING, "SSID for IBSS creation:\t\t\t" },
- { WI_RID_CURRENT_SSID, WI_STRING, "Current netname (SSID):\t\t\t" },
- { WI_RID_DESIRED_SSID, WI_STRING, "Desired netname (SSID):\t\t\t" },
- { WI_RID_CURRENT_BSSID, WI_HEXBYTES, "Current BSSID:\t\t\t\t" },
- { WI_RID_CHANNEL_LIST, WI_HEXWORDS, "Channel list:\t\t\t\t" },
- { WI_RID_OWN_CHNL, WI_WORDS, "IBSS channel:\t\t\t\t" },
- { WI_RID_CURRENT_CHAN, WI_WORDS, "Current channel:\t\t\t" },
- { WI_RID_COMMS_QUALITY, WI_WORDS, "Comms quality/signal/noise:\t\t" },
- { WI_RID_DBM_COMMS_QUAL, WI_SWORDS, "dBm Coms Quality:\t\t\t" },
- { WI_RID_PROMISC, WI_BOOL, "Promiscuous mode:\t\t\t" },
- { WI_RID_PROCFRAME, WI_BOOL, "Process 802.11b Frame:\t\t\t" },
- { WI_RID_PRISM2, WI_WORDS, "Intersil-Prism2 based card:\t\t" },
- { WI_RID_PORTTYPE, WI_WORDS, "Port type (1=BSS, 3=ad-hoc):\t\t"},
- { WI_RID_MAC_NODE, WI_HEXBYTES, "MAC address:\t\t\t\t"},
- { WI_RID_TX_RATE, WI_WORDS, "TX rate (selection):\t\t\t"},
- { WI_RID_CUR_TX_RATE, WI_WORDS, "TX rate (actual speed):\t\t\t"},
- { WI_RID_RTS_THRESH, WI_WORDS, "RTS/CTS handshake threshold:\t\t"},
- { WI_RID_CREATE_IBSS, WI_BOOL, "Create IBSS:\t\t\t\t" },
- { WI_RID_SYSTEM_SCALE, WI_WORDS, "Access point density:\t\t\t" },
- { WI_RID_PM_ENABLED, WI_WORDS, "Power Mgmt (1=on, 0=off):\t\t" },
- { WI_RID_MAX_SLEEP, WI_WORDS, "Max sleep time:\t\t\t\t" },
- { WI_RID_PRI_IDENTITY, WI_WORDS, "PRI Identity:\t\t\t\t" },
- { WI_RID_STA_IDENTITY, WI_WORDS, "STA Identity:\t\t\t\t" } ,
- { WI_RID_CARD_ID, WI_HEXWORDS, "Card ID register:\t\t\t" },
- { WI_RID_REG_DOMAINS, WI_REGDOMS, "Regulatory Domains:\t\t\t" },
- { WI_RID_TEMP_TYPE, WI_WORDS, "Temperature Range:\t\t\t" },
-#ifdef WI_EXTRA_INFO
- { WI_RID_PRI_SUP_RANGE, WI_WORDS, "PRI Sup Range:\t\t\t\t" },
- { WI_RID_CIF_ACT_RANGE, WI_WORDS, "CFI Act Sup Range:\t\t\t" },
- { WI_RID_STA_SUP_RANGE, WI_WORDS, "STA Sup Range:\t\t\t\t" } ,
- { WI_RID_MFI_ACT_RANGE, WI_WORDS, "MFI Act Sup Range:\t\t\t" } ,
-#endif
- { 0, 0, NULL }
-};
-
-static struct wi_table wi_crypt_table[] = {
- { WI_RID_ENCRYPTION, WI_BOOL, "WEP encryption:\t\t\t\t" },
- { WI_RID_TX_CRYPT_KEY, WI_WORDS, "TX encryption key:\t\t\t" },
- { WI_RID_DEFLT_CRYPT_KEYS, WI_KEYSTRUCT, "Encryption keys:\t\t\t" },
- { 0, 0, NULL }
-};
-
-static void
-wi_dumpinfo(const char *iface)
-{
- struct wi_req wreq;
- int i, has_wep;
- struct wi_table *w;
-
- bzero((char *)&wreq, sizeof(wreq));
-
- wreq.wi_len = WI_MAX_DATALEN;
- wreq.wi_type = WI_RID_WEP_AVAIL;
-
- if (wi_getval(iface, &wreq) == 0)
- has_wep = wreq.wi_val[0];
- else
- has_wep = 0;
-
- w = wi_table;
-
- for (i = 0; w[i].wi_type; i++) {
- bzero((char *)&wreq, sizeof(wreq));
-
- wreq.wi_len = WI_MAX_DATALEN;
- wreq.wi_type = w[i].wi_code;
-
- if (wi_getvalmaybe(iface, &wreq) == -1)
- continue;
- printf("%s", w[i].wi_str);
- switch(w[i].wi_type) {
- case WI_STRING:
- wi_printstr(&wreq);
- break;
- case WI_WORDS:
- wi_printwords(&wreq);
- break;
- case WI_SWORDS:
- wi_printswords(&wreq);
- break;
- case WI_HEXWORDS:
- wi_printhexwords(&wreq);
- break;
- case WI_REGDOMS:
- wi_printregdoms(&wreq);
- break;
- case WI_BOOL:
- wi_printbool(&wreq);
- break;
- case WI_HEXBYTES:
- wi_printhex(&wreq);
- break;
- default:
- break;
- }
- printf("\n");
- }
-
- if (has_wep) {
- w = wi_crypt_table;
- for (i = 0; w[i].wi_type; i++) {
- bzero((char *)&wreq, sizeof(wreq));
-
- wreq.wi_len = WI_MAX_DATALEN;
- wreq.wi_type = w[i].wi_code;
-
- if (wi_getval(iface, &wreq) == -1)
- continue;
- printf("%s", w[i].wi_str);
- switch(w[i].wi_type) {
- case WI_STRING:
- wi_printstr(&wreq);
- break;
- case WI_WORDS:
- if (wreq.wi_type == WI_RID_TX_CRYPT_KEY)
- wreq.wi_val[0]++;
- wi_printwords(&wreq);
- break;
- case WI_BOOL:
- wi_printbool(&wreq);
- break;
- case WI_HEXBYTES:
- wi_printhex(&wreq);
- break;
- case WI_KEYSTRUCT:
- wi_printkeys(&wreq);
- break;
- default:
- break;
- }
- printf("\n");
- }
- }
-
- if (listaps)
- wi_printaplist(iface);
-
- return;
-}
-
-static void
-wi_dumpstats(const char *iface)
-{
- struct wi_req wreq;
- struct wi_counters *c;
-
- if (iface == NULL)
- errx(1, "must specify interface name");
-
- bzero((char *)&wreq, sizeof(wreq));
- wreq.wi_len = WI_MAX_DATALEN;
- wreq.wi_type = WI_RID_IFACE_STATS;
-
- if (wi_getval(iface, &wreq) == -1)
- errx(1, "Cannot get interface stats");
-
- c = (struct wi_counters *)&wreq.wi_val;
-
- printf("Transmitted unicast frames:\t\t%d\n",
- c->wi_tx_unicast_frames);
- printf("Transmitted multicast frames:\t\t%d\n",
- c->wi_tx_multicast_frames);
- printf("Transmitted fragments:\t\t\t%d\n",
- c->wi_tx_fragments);
- printf("Transmitted unicast octets:\t\t%d\n",
- c->wi_tx_unicast_octets);
- printf("Transmitted multicast octets:\t\t%d\n",
- c->wi_tx_multicast_octets);
- printf("Single transmit retries:\t\t%d\n",
- c->wi_tx_single_retries);
- printf("Multiple transmit retries:\t\t%d\n",
- c->wi_tx_multi_retries);
- printf("Transmit retry limit exceeded:\t\t%d\n",
- c->wi_tx_retry_limit);
- printf("Transmit discards:\t\t\t%d\n",
- c->wi_tx_discards);
- printf("Transmit discards due to wrong SA:\t%d\n",
- c->wi_tx_discards_wrong_sa);
- printf("Received unicast frames:\t\t%d\n",
- c->wi_rx_unicast_frames);
- printf("Received multicast frames:\t\t%d\n",
- c->wi_rx_multicast_frames);
- printf("Received fragments:\t\t\t%d\n",
- c->wi_rx_fragments);
- printf("Received unicast octets:\t\t%d\n",
- c->wi_rx_unicast_octets);
- printf("Received multicast octets:\t\t%d\n",
- c->wi_rx_multicast_octets);
- printf("Receive FCS errors:\t\t\t%d\n",
- c->wi_rx_fcs_errors);
- printf("Receive discards due to no buffer:\t%d\n",
- c->wi_rx_discards_nobuf);
- printf("Can't decrypt WEP frame:\t\t%d\n",
- c->wi_rx_WEP_cant_decrypt);
- printf("Received message fragments:\t\t%d\n",
- c->wi_rx_msg_in_msg_frags);
- printf("Received message bad fragments:\t\t%d\n",
- c->wi_rx_msg_in_bad_msg_frags);
-
- return;
-}
-
-static void
-usage(const char *p)
-{
- fprintf(stderr, "usage: %s -i iface\n", p);
- fprintf(stderr, "\t%s -i iface -o\n", p);
- fprintf(stderr, "\t%s -i iface -l\n", p);
- fprintf(stderr, "\t%s -i iface -L\n", p);
- fprintf(stderr, "\t%s -i iface -t tx rate\n", p);
- fprintf(stderr, "\t%s -i iface -n network name\n", p);
- fprintf(stderr, "\t%s -i iface -s station name\n", p);
- fprintf(stderr, "\t%s -i iface -c 0|1\n", p);
- fprintf(stderr, "\t%s -i iface -q SSID\n", p);
- fprintf(stderr, "\t%s -i iface -p port type\n", p);
- fprintf(stderr, "\t%s -i iface -a access point density\n", p);
- fprintf(stderr, "\t%s -i iface -m mac address\n", p);
- fprintf(stderr, "\t%s -i iface -d max data length\n", p);
- fprintf(stderr, "\t%s -i iface -e 0|1\n", p);
- fprintf(stderr, "\t%s -i iface -k encryption key [-v 1|2|3|4]\n", p);
- fprintf(stderr, "\t%s -i iface -r RTS threshold\n", p);
- fprintf(stderr, "\t%s -i iface -f frequency\n", p);
- fprintf(stderr, "\t%s -i iface -F 0|1\n", p);
- fprintf(stderr, "\t%s -i iface -P 0|1\n", p);
- fprintf(stderr, "\t%s -i iface -S max sleep duration\n", p);
- fprintf(stderr, "\t%s -i iface -T 1|2|3|4\n", p);
-#ifdef WICACHE
- fprintf(stderr, "\t%s -i iface -Z zero out signal cache\n", p);
- fprintf(stderr, "\t%s -i iface -C print signal cache\n", p);
-#endif
-
- exit(1);
-}
-
-static void
-wi_printaps(struct wi_req *wreq)
-{
- struct wi_apinfo *w;
- int i, j, nstations, rate;
-
- nstations = *(int *)wreq->wi_val;
- printf("%d station%s:\n", nstations, nstations == 1 ? "" : "s");
- w = (struct wi_apinfo *)(((char *)&wreq->wi_val) + sizeof(int));
- for ( i = 0; i < nstations; i++, w++) {
- printf("ap[%d]:\n", i);
- if (w->scanreason) {
- static char *scanm[] = {
- "Host initiated",
- "Firmware initiated",
- "Inquiry request from host"
- };
- printf("\tScanReason:\t\t\t[ %s ]\n",
- scanm[w->scanreason - 1]);
- }
- printf("\tnetname (SSID):\t\t\t[ ");
- for (j = 0; j < w->namelen; j++) {
- printf("%c", w->name[j]);
- }
- printf(" ]\n");
- printf("\tBSSID:\t\t\t\t[ %02x:%02x:%02x:%02x:%02x:%02x ]\n",
- w->bssid[0]&0xff, w->bssid[1]&0xff,
- w->bssid[2]&0xff, w->bssid[3]&0xff,
- w->bssid[4]&0xff, w->bssid[5]&0xff);
- printf("\tChannel:\t\t\t[ %d ]\n", w->channel);
- printf("\tQuality/Signal/Noise [signal]:\t[ %d / %d / %d ]\n"
- "\t [dBm]:\t[ %d / %d / %d ]\n",
- w->quality, w->signal, w->noise,
- w->quality, w->signal - 149, w->noise - 149);
- printf("\tBSS Beacon Interval [msec]:\t[ %d ]\n", w->interval);
- printf("\tCapinfo:\t\t\t[ ");
- if (w->capinfo & IEEE80211_CAPINFO_ESS)
- printf("ESS ");
- if (w->capinfo & IEEE80211_CAPINFO_PRIVACY)
- printf("WEP ");
- printf("]\n");
-
- switch (w->rate) {
- case WI_APRATE_1:
- rate = 1;
- break;
- case WI_APRATE_2:
- rate = 2;
- break;
- case WI_APRATE_5:
- rate = 5.5;
- break;
- case WI_APRATE_11:
- rate = 11;
- break;
-#ifdef WI_APRATE_0
- case WI_APRATE_0:
-#endif
- default:
- rate = 0;
- break;
- }
- if (rate) printf("\tDataRate [Mbps]:\t\t[ %d ]\n", rate);
- }
-}
-
-static void
-wi_dumpstations(const char *iface)
-{
- struct wi_req wreq;
-
- if (iface == NULL)
- errx(1, "must specify interface name");
-
- bzero((char *)&wreq, sizeof(wreq));
- wreq.wi_len = WI_MAX_DATALEN;
- wreq.wi_type = WI_RID_READ_APS;
-
- if (wi_getval(iface, &wreq) == -1)
- errx(1, "Cannot get stations");
- wi_printaps(&wreq);
-}
-
-#ifdef WICACHE
-static void
-wi_zerocache(const char *iface)
-{
- struct wi_req wreq;
-
- if (iface == NULL)
- errx(1, "must specify interface name");
-
- bzero((char *)&wreq, sizeof(wreq));
- wreq.wi_len = 0;
- wreq.wi_type = WI_RID_ZERO_CACHE;
- wi_getval(iface, &wreq);
-}
-
-static void
-wi_readcache(const char *iface)
-{
- struct wi_req wreq;
- int *wi_sigitems;
- struct wi_sigcache *sc;
- char * pt;
- int i;
-
- if (iface == NULL)
- errx(1, "must specify interface name");
-
- bzero((char *)&wreq, sizeof(wreq));
- wreq.wi_len = WI_MAX_DATALEN;
- wreq.wi_type = WI_RID_READ_CACHE;
- if (wi_getval(iface, &wreq) == -1)
- errx(1, "Cannot read signal cache");
-
- wi_sigitems = (int *) &wreq.wi_val;
- pt = ((char *) &wreq.wi_val);
- pt += sizeof(int);
- sc = (struct wi_sigcache *) pt;
-
- for (i = 0; i < *wi_sigitems; i++) {
- printf("[%d/%d]:", i+1, *wi_sigitems);
- printf(" %02x:%02x:%02x:%02x:%02x:%02x,",
- sc->macsrc[0]&0xff,
- sc->macsrc[1]&0xff,
- sc->macsrc[2]&0xff,
- sc->macsrc[3]&0xff,
- sc->macsrc[4]&0xff,
- sc->macsrc[5]&0xff);
- printf(" %d.%d.%d.%d,",((sc->ipsrc >> 0) & 0xff),
- ((sc->ipsrc >> 8) & 0xff),
- ((sc->ipsrc >> 16) & 0xff),
- ((sc->ipsrc >> 24) & 0xff));
- printf(" sig: %d, noise: %d, qual: %d\n",
- sc->signal,
- sc->noise,
- sc->quality);
- sc++;
- }
-
- return;
-}
-#endif
-
-static void
-dep(const char *flag, const char *opt)
-{
- warnx("warning: flag %s deprecated, migrate to ifconfig %s", flag,
- opt);
-}
-
-int
-main(int argc, char *argv[])
-{
- int ch;
- const char *iface = NULL;
- char *p = argv[0];
- char *key = NULL;
- int modifier = 0;
-
- /* Get the interface name */
- opterr = 0;
- ch = getopt(argc, argv, "i:");
- if (ch == 'i') {
- iface = optarg;
- } else {
- if (argc > 1 && *argv[1] != '-') {
- iface = argv[1];
- optind = 2;
- } else {
- iface = "wi0";
- optind = 1;
- }
- optreset = 1;
- }
- opterr = 1;
-
- while((ch = getopt(argc, argv,
- "a:c:d:e:f:hi:k:lm:n:op:q:r:s:t:v:CF:LP:QS:T:Z")) != -1) {
- switch(ch) {
- case 'Z':
-#ifdef WICACHE
- wi_zerocache(iface);
-#else
- printf("WICACHE not available\n");
-#endif
- exit(0);
- break;
- case 'C':
-#ifdef WICACHE
- wi_readcache(iface);
-#else
- printf("WICACHE not available\n");
-#endif
- exit(0);
- break;
- case 'o':
- wi_dumpstats(iface);
- exit(0);
- break;
- case 'c':
- dep("c", "mediaopt");
- wi_setword(iface, WI_RID_CREATE_IBSS, atoi(optarg));
- exit(0);
- break;
- case 'd':
- wi_setword(iface, WI_RID_MAX_DATALEN, atoi(optarg));
- exit(0);
- break;
- case 'e':
- dep("e", "wepmode");
- wi_setword(iface, WI_RID_ENCRYPTION, atoi(optarg));
- exit(0);
- break;
- case 'f':
- dep("f", "channel");
- wi_setword(iface, WI_RID_OWN_CHNL, atoi(optarg));
- exit(0);
- break;
- case 'F':
- wi_setword(iface, WI_RID_PROCFRAME, atoi(optarg));
- exit(0);
- break;
- case 'k':
- dep("k", "wepkey");
- key = optarg;
- break;
- case 'L':
- listaps++;
- break;
- case 'l':
- wi_dumpstations(iface);
- exit(0);
- break;
- case 'p':
- dep("p", "mediaopt");
- wi_setword(iface, WI_RID_PORTTYPE, atoi(optarg));
- exit(0);
- break;
- case 'r':
- wi_setword(iface, WI_RID_RTS_THRESH, atoi(optarg));
- exit(0);
- break;
- case 't':
- dep("t", "mediaopt");
- wi_setword(iface, WI_RID_TX_RATE, atoi(optarg));
- exit(0);
- break;
- case 'n':
- dep("n", "ssid");
- wi_setstr(iface, WI_RID_DESIRED_SSID, optarg);
- exit(0);
- break;
- case 's':
- dep("s", "stationname");
- wi_setstr(iface, WI_RID_NODENAME, optarg);
- exit(0);
- break;
- case 'm':
- wi_sethex(iface, WI_RID_MAC_NODE, optarg);
- exit(0);
- break;
- case 'Q':
- quiet = 1;
- break;
- case 'q':
- dep("q", "ssid");
- wi_setstr(iface, WI_RID_OWN_SSID, optarg);
- exit(0);
- break;
- case 'S':
- dep("S", "powersleep");
- wi_setword(iface, WI_RID_MAX_SLEEP, atoi(optarg));
- exit(0);
- break;
- case 'T':
- dep("T", "weptxkey");
- wi_setword(iface,
- WI_RID_TX_CRYPT_KEY, atoi(optarg) - 1);
- exit(0);
- break;
- case 'P':
- dep("P", "powersave");
- wi_setword(iface, WI_RID_PM_ENABLED, atoi(optarg));
- exit(0);
- break;
- case 'a':
- wi_setword(iface, WI_RID_SYSTEM_SCALE, atoi(optarg));
- exit(0);
- break;
- case 'v':
- modifier = atoi(optarg);
- modifier--;
- break;
- case 'h':
- default:
- usage(p);
- break;
- }
- }
-
- if (iface == NULL)
- usage(p);
-
- if (key != NULL) {
- wi_setkeys(iface, key, modifier);
- exit(0);
- }
-
- if (listaps > 1) {
- wi_printaplist(iface);
- exit(0);
- }
-
- wi_dumpinfo(iface);
-
- exit(0);
-}
--- usr.sbin/wicontrol/wicontrol.8
+++ /dev/null
@@ -1,587 +0,0 @@
-.\" Copyright (c) 1997, 1998, 1999
-.\" Bill Paul <wpaul at ctr.columbia.edu> All rights reserved.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\" notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\" notice, this list of conditions and the following disclaimer in the
-.\" documentation and/or other materials provided with the distribution.
-.\" 3. All advertising materials mentioning features or use of this software
-.\" must display the following acknowledgement:
-.\" This product includes software developed by Bill Paul.
-.\" 4. Neither the name of the author nor the names of any co-contributors
-.\" may be used to endorse or promote products derived from this software
-.\" without specific prior written permission.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
-.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-.\" ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
-.\" BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-.\" CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-.\" SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-.\" INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-.\" CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-.\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
-.\" THE POSSIBILITY OF SUCH DAMAGE.
-.\"
-.\" $FreeBSD: src/usr.sbin/wicontrol/wicontrol.8,v 1.47 2005/02/13 22:25:33 ru Exp $
-.\"
-.Dd March 4, 2003
-.Dt WICONTROL 8
-.Os
-.Sh NAME
-.Nm wicontrol
-.Nd "configure Lucent, Intersil, and Atheros wireless devices"
-.Sh SYNOPSIS
-.Nm
-.Op Fl i
-.Ar iface Op Fl o
-.Nm
-.Op Fl i
-.Ar iface Fl l
-(dump associated stations)
-.Nm
-.Op Fl i
-.Ar iface Fl L
-(list available access points)
-.Nm
-.Op Fl i
-.Ar iface Fl t Ar tx_rate
-.Nm
-.Op Fl i
-.Ar iface Fl n Ar network_name
-.Nm
-.Op Fl i
-.Ar iface Fl s Ar station_name
-.Nm
-.Op Fl i
-.Ar iface Fl c Cm 0 | 1
-.Nm
-.Op Fl i
-.Ar iface Fl q Ar SSID
-.Nm
-.Op Fl i
-.Ar iface Fl p Ar port_type
-.Nm
-.Op Fl i
-.Ar iface Fl a Ar access_point_density
-.Nm
-.Op Fl i
-.Ar iface Fl m Ar mac_address
-.Nm
-.Op Fl i
-.Ar iface Fl d Ar max_data_length
-.Nm
-.Op Fl i
-.Ar iface Fl e Cm 0 | 1
-.Nm
-.Op Fl i
-.Ar iface Fl k Ar key
-.Op Fl v Cm 1 | 2 | 3 | 4
-.Nm
-.Op Fl i
-.Ar iface Fl T Cm 1 | 2 | 3 | 4
-.Nm
-.Op Fl i
-.Ar iface Fl r Ar RTS_threshold
-.Nm
-.Op Fl i
-.Ar iface Fl f Ar frequency
-.Nm
-.Op Fl i
-.Ar iface Fl P Cm 0 | 1
-.Nm
-.Op Fl i
-.Ar iface Fl S Ar max_sleep_duration
-.Nm
-.Op Fl i
-.Ar iface Fl Z
-(zero signal cache)
-.Nm
-.Op Fl i
-.Ar iface Fl C
-(display signal cache)
-.Sh DESCRIPTION
-The
-.Nm
-utility controls the operation of Lucent, Intersil, and Atheros-based wireless
-networking devices via
-.Xr wi 4
-or
-.Xr ath 4
-driver.
-.Pp
-You should not use this program to configure IEEE 802.11 parameters.
-Use
-.Xr ifconfig 8
-instead to do those tasks (i.e., set SSID, WEP key, etc.).
-.Pp
-The
-.Nm
-utility can also be used to view the current settings of these parameters,
-dump out the values of the card's statistics counters, list associated
-stations (in HostAP mode), and scan for available access points.
-.Pp
-The
-.Ar iface
-argument given to
-.Nm
-should be the logical interface name associated with the Lucent, Intersil,
-and Atheros device
-.Li ( wi0 , wi1 , ath0 ,
-etc.).
-If none is specified then
-.Dq Li wi0
-is used as default.
-.Sh OPTIONS
-The options are as follows:
-.Bl -tag -width indent
-.It Oo Fl i Oc Ar iface Op Fl o
-Display the current settings of the specified wireless interface.
-This retrieves the current card settings from the driver and prints them
-out.
-Using the additional
-.Fl o
-flag will cause
-.Nm
-to print out the statistics counters instead of the card settings.
-Encryption keys are only displayed if
-.Nm
-is run as root.
-.It Oo Fl i Oc Ar iface Fl a Ar access_point_density
-Specify the
-access point density
-for a given interface.
-Legal values are
-.Cm 1
-(low),
-.Cm 2
-(medium) and
-.Cm 3
-(high).
-This setting influences some of the radio modem threshold settings.
-.It Oo Fl i Oc Ar iface Fl m Ar mac_address
-Set the station address for the specified interface.
-The
-.Ar mac_address
-is specified as a series of six hexadecimal values separated by colons,
-e.g.,
-.Dq Li 00:60:1d:12:34:56 .
-This programs the new address into the card
-and updates the interface as well.
-.It Oo Fl i Oc Ar iface Fl d Ar max_data_length
-Set the maximum receive and transmit frame size for a specified interface.
-The
-.Ar max_data_length
-can be any number from 350 to 2304.
-The default is 2304.
-.It Oo Fl i Oc Ar iface Fl r Ar RTS_threshold
-Set the RTS/CTS threshold for a given interface.
-This controls the
-number of bytes used for the RTS/CTS handshake boundary.
-The
-.Ar RTS_threshold
-can be any value between 0 and 2347.
-The default is 2347.
-.It Oo Fl i Oc Ar iface Fl Z
-Clear the signal strength cache maintained internally by the
-.Xr wi 4
-driver.
-.It Oo Fl i Oc Ar iface Fl C
-Display the cached signal strength information maintained by the
-.Xr wi 4
-driver.
-The driver retains information about signal strength and
-noise level for packets received from different hosts.
-The signal
-strength and noise level values are displayed in units of dBms.
-The signal quality value is produced by subtracting the noise level
-from the signal strength (i.e., less noise and better signal yields
-better signal quality).
-.El
-.Sh DEPRECATED AND OBSOLETE OPTIONS
-The
-.Nm
-utility has a number of options that are now deprecated or obsolete, as they
-have been overtaken by extensions to
-.Xr ifconfig 8
-and changes to the driver.
-The deprecated and obsolete options are as follows:
-.Bl -tag -width indent
-.It Oo Fl i Oc Ar iface Fl t Ar tx_rate
-This flag is deprecated.
-Use
-.Xr ifconfig 8
-.Cm mediaopt
-instead.
-.Pp
-Set the transmit rate of the specified interface.
-The legal values
-for the transmit rate vary depending on whether the interface is a
-standard WaveLAN/IEEE or a WaveLAN/IEEE Turbo adapter.
-The standard
-NICs support a maximum transmit rate of 2Mbps while the turbo NICs
-support a maximum speed of 6Mbps.
-The following table shows the
-legal transmit rate settings and the corresponding transmit speeds:
-.Bl -column ".Em TX\ rate" ".Em NIC\ speed" -offset indent
-.Em "TX rate NIC speed"
-.It Cm 1 Ta "Fixed Low (1Mbps)"
-.It Cm 2 Ta "Fixed Standard (2Mbps)"
-.It Cm 3 Ta "Auto Rate Select (High)"
-.It Cm 4 Ta "Fixed Medium (4Mbps)"
-.It Cm 5 Ta "Fixed High (6Mbps)"
-.It Cm 6 Ta "Auto Rate Select (Standard)"
-.It Cm 7 Ta "Auto Rate Select (Medium)"
-.El
-.Pp
-The default driver setting is
-.Cm 3
-(auto rate select).
-The numbers vary from card to card.
-.It Oo Fl i Oc Ar iface Fl n Ar network_name
-This flag is deprecated.
-Use
-.Xr ifconfig 8
-.Cm ssid
-or
-.Cm nwid
-instead.
-.Pp
-Set the name of the service set (IBSS) that this station wishes to
-join.
-The
-.Ar network_name
-can be any text string up to 30 characters in length.
-The default name
-is the string
-.Dq Li ANY
-which should allow the station to connect to the first
-available access point.
-The interface should be set for BSS mode using
-the
-.Fl p
-flag in order for this to work.
-.Pp
-Note: the WaveLAN manual indicates that an empty string will allow the
-host to connect to any access point, however I have also seen a reference
-in another driver which indicates that the
-.Dq Li ANY
-string works as well.
-.It Oo Fl i Oc Ar iface Fl s Ar station_name
-This flag is deprecated.
-Use
-.Xr ifconfig 8
-.Cm stationname
-or
-.Cm station
-instead.
-.Pp
-Sets the
-station name
-for the specified interface.
-The
-.Ar station_name
-is used for diagnostic purposes.
-The
-.Tn "Lucent WaveMANAGER"
-software can
-poll the names of remote hosts.
-.It Oo Fl i Oc Ar iface Fl c Cm 0 | 1
-This flag is deprecated.
-IBSS networks are automatically created on those cards whose firmware
-supports it while in IBSS mode.
-.Pp
-Allow the station to create a service set (IBSS).
-Permitted values are
-.Cm 0
-(do not create IBSS) and
-.Cm 1
-(enable creation of IBSS).
-The default is
-.Cm 0 .
-.Pp
-Only newer versions of the Lucent firmware support this.
-.It Oo Fl i Oc Ar iface Fl q Ar SSID
-This flag is deprecated.
-The
-.Cm ssid
-setting from
-.Xr ifconfig 8
-is the current preferred way of setting this parameter.
-.Pp
-Specify the name of an IBSS (SSID) to create on a given interface.
-The
-.Ar SSID
-can be any text string up to 30 characters long.
-.Pp
-Note: this option is provided for experimental purposes only: enabling
-the creation of an IBSS on a host system does not appear to actually work.
-.It Oo Fl i Oc Ar iface Fl p Ar port_type
-This flag is deprecated.
-It should never be used.
-Do not use this flag.
-Its meaning depends on the type of card you are using, as well as the
-firmware you have installed in the card in some cases.
-Beware.
-Danger.
-Do not use.
-Instead, use the
-.Xr ifconfig 8
-.Cm media
-and
-.Cm mediaopt
-commands.
-.Pp
-Set the
-port type
-for a specified interface.
-The legal values for
-.Ar port_type
-are
-.Cm 1
-(BSS mode) and
-.Cm 3
-(ad-hoc) mode.
-In ad-hoc mode, the station can
-communicate directly with any other stations within direct radio range
-(provided that they are also operating in ad-hoc mode).
-In BSS mode,
-hosts must associate with a service set controlled by an access point,
-which relays traffic between end stations.
-The default setting is
-.Cm 1
-(BSS mode).
-Lucent cards have one set of meanings.
-Prism cards have another.
-Symbol cards have a third.
-Do not use this flag.
-.It Oo Fl i Oc Ar iface Fl e Cm 0 | 1
-This flag is deprecated.
-It has been replaced by the
-.Xr ifconfig 8
-.Cm wepmode
-option.
-.Pp
-Enable or disable WEP encryption.
-Permitted values are
-.Cm 0
-(encryption disabled) or
-.Cm 1
-(encryption enabled).
-Encryption is off by default.
-.Pp
-Both 128-bit and 64-bit WEP have been broken.
-See the
-.Sx BUGS
-section for details.
-.It Oo Fl i Oc Ar iface Fl k Ar key Op Fl v Cm 1 | 2 | 3 | 4
-This flag is obsolete.
-The
-.Xr ifconfig 8
-.Cm wepkey
-should be used instead.
-.Pp
-Set WEP encryption keys.
-There are four default encryption keys
-that can be programmed.
-A specific key can be set using
-the
-.Fl v
-flag.
-If the
-.Fl v
-flag is not specified, the first key will be set.
-Encryption keys
-can either be normal text (i.e.,
-.Dq Li hello )
-or a series of hexadecimal digits (i.e.,
-.Dq Li 0x1234512345 ) .
-For
-WaveLAN Turbo Silver cards, the key is restricted to 40 bits, hence
-the key can be either a 5 character text string or 10 hex digits.
-For WaveLAN Turbo Gold cards, the key can also be 104 bits,
-which means the key can be specified as either a 13 character text
-string or 26 hex digits in addition to the formats supported by the
-Silver cards.
-.Pp
-For maximum portability, hex keys are recommended;
-the mapping of text keys to WEP encryption is usually driver-specific.
-In particular, the
-.Tn Windows
-drivers do this mapping differently to
-.Fx .
-.Pp
-Note: Both 128-bit and 64-bit WEP encryption have been broken.
-See the
-.Sx BUGS
-section for details.
-.It Oo Fl i Oc Ar iface Fl T Cm 1 | 2 | 3 | 4
-This flag is obsolete.
-The
-.Xr ifconfig 8
-.Cm weptxkey
-should be used instead.
-.Pp
-Specify which of the four WEP encryption keys will be used to
-encrypt transmitted packets.
-.Pp
-Note: Both 128-bit and 64-bit WEP have been broken.
-See the
-.Sx BUGS
-section for details.
-.It Oo Fl i Oc Ar iface Fl f Ar frequency
-This flag is deprecated.
-Use
-.Xr ifconfig 8
-.Cm channel
-instead.
-.Pp
-Set the radio frequency of a given interface.
-The
-.Ar frequency
-should be specified as a channel ID as shown in the table below.
-The
-list of available frequencies is dependent on radio regulations specified
-by regional authorities.
-Recognized regulatory authorities include
-the FCC (United States), ETSI (Europe), France and Japan.
-Frequencies
-in the table are specified in MHz.
-.Bl -column ".Em Channel\ ID" ".Em FCC" ".Em ETSI" ".Em France" ".Em Japan" -offset indent
-.Em "Channel ID FCC ETSI France Japan"
-.It Cm 1 Ta "2412 2412 - 2412"
-.It Cm 2 Ta "2417 2417 - 2417"
-.It Cm 3 Ta "2422 2422 - 2422"
-.It Cm 4 Ta "2427 2427 - 2427"
-.It Cm 5 Ta "2432 2432 - 2432"
-.It Cm 6 Ta "2437 2437 - 2437"
-.It Cm 7 Ta "2442 2442 - 2442"
-.It Cm 8 Ta "2447 2447 - 2447"
-.It Cm 9 Ta "2452 2452 - 2452"
-.It Cm 10 Ta "2457 2457 2457 2457"
-.It Cm 11 Ta "2462 2462 2462 2462"
-.It Cm 12 Ta "- 2467 2467 2467"
-.It Cm 13 Ta "- 2472 2472 2472"
-.It Cm 14 Ta "- - - 2484"
-.El
-.Pp
-If an illegal channel is specified, the
-NIC will revert to its default channel.
-For NICs sold in the United States
-and Europe, the default channel is
-.Cm 3 .
-For NICs sold in France, the default channel is
-.Cm 11 .
-For NICs sold in Japan, the default channel is
-.Cm 14 ,
-and it is the only available channel for pre-11Mbps NICs.
-Note that two stations must be set to the same channel in order to
-communicate.
-.It Oo Fl i Oc Ar iface Fl P Cm 0 | 1
-This flag is obsolete.
-The
-.Xr ifconfig 8
-.Cm powersave
-should be used instead.
-.Pp
-Enable or disable power management on a given interface.
-Enabling
-power management uses an alternating sleep/wake protocol to help
-conserve power on mobile stations, at the cost of some increased
-receive latency.
-Power management is off by default.
-Note that power
-management requires the cooperation of an access point in order to
-function; it is not functional in ad-hoc mode.
-Also, power management
-is only implemented in Lucent WavePOINT firmware version 2.03 or
-later, and in WaveLAN PCMCIA adapter firmware 2.00 or later.
-Older
-revisions will silently ignore the power management setting.
-Legal
-values for this parameter are
-.Cm 0
-(off) and
-.Cm 1
-(on).
-.It Oo Fl i Oc Ar iface Fl S Ar max_sleep_interval
-This flag is obsolete.
-The
-.Xr ifconfig 8
-.Cm powersleep
-should be used instead.
-.Pp
-Specify the sleep interval to use when power management is enabled.
-The
-.Ar max_sleep_interval
-is specified in milliseconds.
-The default is 100.
-.El
-.Sh SEE ALSO
-.Xr ath 4 ,
-.Xr awi 4 ,
-.Xr ipsec 4 ,
-.Xr wi 4 ,
-.Xr ifconfig 8
-.Sh HISTORY
-The
-.Nm
-utility first appeared in
-.Fx 3.0 .
-.Sh AUTHORS
-The
-.Nm
-utility was written by
-.An Bill Paul Aq wpaul at ctr.columbia.edu .
-.Sh BUGS
-There are deprecated flags here that duplicate functionality of
-.Xr ifconfig 8 .
-These flags were deprecated in
-.Fx 5.1
-and will be removed in a future release.
-.Pp
-The WEP encryption method has been broken so that third parties
-can recover the keys in use relatively quickly at distances that are
-surprising to most people.
-Do not rely on WEP for anything but the most basic, remedial security.
-IPSEC will give you a higher level of security and should be used
-whenever possible.
-Do not trust access points or wireless machines that connect through
-them as they can provide no assurance that the traffic is legitimate.
-MAC addresses can easily be forged and should therefore not be used as
-the only access control.
-.Pp
-The attack on WEP is a passive attack, requiring only the ability to
-sniff packets on the network.
-The passive attack can be launched at a distance larger, up to many
-miles, than one might otherwise expect given a specialized antenna
-used in point to point applications.
-The attacker can recover the keys from a 128-bit WEP network with only
-5,000,000 to 6,000,000 packets.
-While this may sound like a large number of packets, empirical
-evidence suggests that this amount of traffic is generated in a few
-hours on a partially loaded network.
-Once a key has been compromised, the only remedial action is to
-discontinue it and use a new key.
-.Pp
-See
-.Pa http://www.cs.rice.edu/~astubble/wep/wep_attack.html
-for details of the attack.
-Many programs to assist in cracking WEP keys are widely available.
-.Pp
-If you must use WEP, you are strongly encouraged to pick keys whose
-bytes are random and not confined to
-.Tn ASCII
-characters.
-Brute force attacks on WEP keys are also possible.
-Experience has showns that
-.Tn ASCII
-keys can be cracked in less than a day.
-Even random bytes can be cracked in less than two weeks.
-.Pp
-Signal cache is broken right now.
--- usr.sbin/wicontrol/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-# $FreeBSD: src/usr.sbin/wicontrol/Makefile,v 1.10 2003/04/04 17:49:20 obrien Exp $
-
-PROG= wicontrol
-MAN= wicontrol.8
-
-WARNS?= 2
-CFLAGS+= -DWICACHE
-
-.include <bsd.prog.mk>
More information about the Midnightbsd-cvs
mailing list