[Midnightbsd-cvs] src [7066] trunk/contrib/llvm: delete old files
laffer1 at midnightbsd.org
laffer1 at midnightbsd.org
Sun Jun 21 15:01:12 EDT 2015
Revision: 7066
http://svnweb.midnightbsd.org/src/?rev=7066
Author: laffer1
Date: 2015-06-21 15:01:11 -0400 (Sun, 21 Jun 2015)
Log Message:
-----------
delete old files
Removed Paths:
-------------
trunk/contrib/llvm/.arcconfig
trunk/contrib/llvm/.gitignore
trunk/contrib/llvm/CMakeLists.txt
trunk/contrib/llvm/CODE_OWNERS.TXT
trunk/contrib/llvm/CREDITS.TXT
trunk/contrib/llvm/LLVMBuild.txt
trunk/contrib/llvm/Makefile
trunk/contrib/llvm/Makefile.common
trunk/contrib/llvm/Makefile.config.in
trunk/contrib/llvm/Makefile.rules
trunk/contrib/llvm/README.txt
trunk/contrib/llvm/autoconf/
trunk/contrib/llvm/bindings/
trunk/contrib/llvm/cmake/
trunk/contrib/llvm/configure
trunk/contrib/llvm/docs/
trunk/contrib/llvm/examples/
trunk/contrib/llvm/llvm.spec.in
trunk/contrib/llvm/projects/
trunk/contrib/llvm/runtime/
Deleted: trunk/contrib/llvm/.arcconfig
===================================================================
--- trunk/contrib/llvm/.arcconfig 2015-06-21 18:59:54 UTC (rev 7065)
+++ trunk/contrib/llvm/.arcconfig 2015-06-21 19:01:11 UTC (rev 7066)
@@ -1,4 +0,0 @@
-{
- "project_id" : "llvm",
- "conduit_uri" : "http://llvm-reviews.chandlerc.com/"
-}
Deleted: trunk/contrib/llvm/.gitignore
===================================================================
--- trunk/contrib/llvm/.gitignore 2015-06-21 18:59:54 UTC (rev 7065)
+++ trunk/contrib/llvm/.gitignore 2015-06-21 19:01:11 UTC (rev 7066)
@@ -1,48 +0,0 @@
-#==============================================================================#
-# This file specifies intentionally untracked files that git should ignore.
-# See: http://www.kernel.org/pub/software/scm/git/docs/gitignore.html
-#
-# This file is intentionally different from the output of `git svn show-ignore`,
-# as most of those are useless.
-#==============================================================================#
-
-#==============================================================================#
-# File extensions to be ignored anywhere in the tree.
-#==============================================================================#
-# Temp files created by most text editors.
-*~
-# Merge files created by git.
-*.orig
-# Byte compiled python modules.
-*.pyc
-# vim swap files
-.*.swp
-.sw?
-
-#==============================================================================#
-# Explicit files to ignore (only matches one).
-#==============================================================================#
-.gitusers
-autom4te.cache
-cscope.files
-cscope.out
-autoconf/aclocal.m4
-autoconf/autom4te.cache
-compile_commands.json
-
-#==============================================================================#
-# Directories to ignore (do not add trailing '/'s, they skip symlinks).
-#==============================================================================#
-# External projects that are tracked independently.
-projects/*
-!projects/sample
-!projects/CMakeLists.txt
-!projects/Makefile
-# Clang, which is tracked independently.
-tools/clang
-# LLDB, which is tracked independently.
-tools/lldb
-# lld, which is tracked independently.
-tools/lld
-# Sphinx build tree, if building in-source dir.
-docs/_build
Deleted: trunk/contrib/llvm/CMakeLists.txt
===================================================================
--- trunk/contrib/llvm/CMakeLists.txt 2015-06-21 18:59:54 UTC (rev 7065)
+++ trunk/contrib/llvm/CMakeLists.txt 2015-06-21 19:01:11 UTC (rev 7066)
@@ -1,500 +0,0 @@
-# See docs/CMake.html for instructions about how to build LLVM with CMake.
-
-project(LLVM)
-cmake_minimum_required(VERSION 2.8)
-
-# Add path for custom modules
-set(CMAKE_MODULE_PATH
- ${CMAKE_MODULE_PATH}
- "${CMAKE_CURRENT_SOURCE_DIR}/cmake"
- "${CMAKE_CURRENT_SOURCE_DIR}/cmake/modules"
- )
-
-set(LLVM_VERSION_MAJOR 3)
-set(LLVM_VERSION_MINOR 3)
-
-set(PACKAGE_VERSION "${LLVM_VERSION_MAJOR}.${LLVM_VERSION_MINOR}svn")
-
-option(LLVM_USE_FOLDERS "Enable solution folders in Visual Studio. Disable for Express versions." ON)
-if ( LLVM_USE_FOLDERS )
- set_property(GLOBAL PROPERTY USE_FOLDERS ON)
-endif()
-
-include(VersionFromVCS)
-
-option(LLVM_APPEND_VC_REV
- "Append the version control system revision id to LLVM version" OFF)
-
-if( LLVM_APPEND_VC_REV )
- add_version_info_from_vcs(PACKAGE_VERSION)
-endif()
-
-set(PACKAGE_NAME LLVM)
-set(PACKAGE_STRING "${PACKAGE_NAME} ${PACKAGE_VERSION}")
-set(PACKAGE_BUGREPORT "http://llvm.org/bugs/")
-
-# Sanity check our source directory to make sure that we are not trying to
-# generate an in-tree build (unless on MSVC_IDE, where it is ok), and to make
-# sure that we don't have any stray generated files lying around in the tree
-# (which would end up getting picked up by header search, instead of the correct
-# versions).
-if( CMAKE_SOURCE_DIR STREQUAL CMAKE_BINARY_DIR AND NOT MSVC_IDE )
- message(FATAL_ERROR "In-source builds are not allowed.
-CMake would overwrite the makefiles distributed with LLVM.
-Please create a directory and run cmake from there, passing the path
-to this source directory as the last argument.
-This process created the file `CMakeCache.txt' and the directory `CMakeFiles'.
-Please delete them.")
-endif()
-if( NOT CMAKE_SOURCE_DIR STREQUAL CMAKE_BINARY_DIR )
- file(GLOB_RECURSE
- tablegenned_files_on_include_dir
- "${CMAKE_CURRENT_SOURCE_DIR}/include/llvm/*.gen")
- file(GLOB_RECURSE
- tablegenned_files_on_lib_dir
- "${CMAKE_CURRENT_SOURCE_DIR}/lib/Target/*.inc")
- if( tablegenned_files_on_include_dir OR tablegenned_files_on_lib_dir)
- message(FATAL_ERROR "Apparently there is a previous in-source build,
-probably as the result of running `configure' and `make' on
-${CMAKE_CURRENT_SOURCE_DIR}.
-This may cause problems. The suspicious files are:
-${tablegenned_files_on_lib_dir}
-${tablegenned_files_on_include_dir}
-Please clean the source directory.")
- endif()
-endif()
-
-string(TOUPPER "${CMAKE_BUILD_TYPE}" uppercase_CMAKE_BUILD_TYPE)
-
-set(LLVM_MAIN_SRC_DIR ${CMAKE_CURRENT_SOURCE_DIR})
-set(LLVM_MAIN_INCLUDE_DIR ${LLVM_MAIN_SRC_DIR}/include)
-set(LLVM_BINARY_DIR ${CMAKE_CURRENT_BINARY_DIR})
-set(LLVM_TOOLS_BINARY_DIR ${LLVM_BINARY_DIR}/bin)
-set(LLVM_EXAMPLES_BINARY_DIR ${LLVM_BINARY_DIR}/examples)
-set(LLVM_LIBDIR_SUFFIX "" CACHE STRING "Define suffix of library directory name (32/64)" )
-
-set(LLVM_ALL_TARGETS
- AArch64
- ARM
- CppBackend
- Hexagon
- Mips
- MBlaze
- MSP430
- NVPTX
- PowerPC
- Sparc
- SystemZ
- X86
- XCore
- )
-
-# List of targets with JIT support:
-set(LLVM_TARGETS_WITH_JIT X86 PowerPC ARM Mips SystemZ)
-
-set(LLVM_TARGETS_TO_BUILD "all"
- CACHE STRING "Semicolon-separated list of targets to build, or \"all\".")
-
-set(LLVM_EXPERIMENTAL_TARGETS_TO_BUILD ""
- CACHE STRING "Semicolon-separated list of experimental targets to build.")
-
-option(BUILD_SHARED_LIBS
- "Build all libraries as shared libraries instead of static" OFF)
-
-option(LLVM_ENABLE_CBE_PRINTF_A "Set to ON if CBE is enabled for printf %a output" ON)
-if(LLVM_ENABLE_CBE_PRINTF_A)
- set(ENABLE_CBE_PRINTF_A 1)
-endif()
-
-option(LLVM_ENABLE_TIMESTAMPS "Enable embedding timestamp information in build" ON)
-if(LLVM_ENABLE_TIMESTAMPS)
- set(ENABLE_TIMESTAMPS 1)
-endif()
-
-option(LLVM_ENABLE_BACKTRACES "Enable embedding backtraces on crash." ON)
-if(LLVM_ENABLE_BACKTRACES)
- set(ENABLE_BACKTRACES 1)
-endif()
-
-option(LLVM_ENABLE_FFI "Use libffi to call external functions from the interpreter" OFF)
-set(FFI_LIBRARY_DIR "" CACHE PATH "Additional directory, where CMake should search for libffi.so")
-set(FFI_INCLUDE_DIR "" CACHE PATH "Additional directory, where CMake should search for ffi.h or ffi/ffi.h")
-
-set(LLVM_TARGET_ARCH "host"
- CACHE STRING "Set target to use for LLVM JIT or use \"host\" for automatic detection.")
-
-option(LLVM_ENABLE_THREADS "Use threads if available." ON)
-
-option(LLVM_ENABLE_ZLIB "Use zlib for compression/decompression if available." ON)
-
-if( LLVM_TARGETS_TO_BUILD STREQUAL "all" )
- set( LLVM_TARGETS_TO_BUILD ${LLVM_ALL_TARGETS} )
-endif()
-
-set(LLVM_TARGETS_TO_BUILD
- ${LLVM_TARGETS_TO_BUILD}
- ${LLVM_EXPERIMENTAL_TARGETS_TO_BUILD})
-
-set(LLVM_ENUM_TARGETS "")
-foreach(c ${LLVM_TARGETS_TO_BUILD})
- list(FIND LLVM_ALL_TARGETS ${c} idx)
- list(FIND LLVM_EXPERIMENTAL_TARGETS_TO_BUILD ${c} idy)
- if( idx LESS 0 AND idy LESS 0 )
- message(FATAL_ERROR "The target `${c}' does not exist.
- It should be one of\n${LLVM_ALL_TARGETS}")
- else()
- set(LLVM_ENUM_TARGETS "${LLVM_ENUM_TARGETS}LLVM_TARGET(${c})\n")
- endif()
-endforeach(c)
-
-set(llvm_builded_incs_dir ${LLVM_BINARY_DIR}/include/llvm)
-
-include(AddLLVMDefinitions)
-
-option(LLVM_ENABLE_PIC "Build Position-Independent Code" ON)
-
-# MSVC has a gazillion warnings with this.
-if( MSVC )
- option(LLVM_ENABLE_WARNINGS "Enable compiler warnings." OFF)
-else( MSVC )
- option(LLVM_ENABLE_WARNINGS "Enable compiler warnings." ON)
-endif()
-
-option(LLVM_ENABLE_PEDANTIC "Compile with pedantic enabled." ON)
-option(LLVM_ENABLE_WERROR "Fail and stop if a warning is triggered." OFF)
-
-if( uppercase_CMAKE_BUILD_TYPE STREQUAL "RELEASE" )
- option(LLVM_ENABLE_ASSERTIONS "Enable assertions" OFF)
-else()
- option(LLVM_ENABLE_ASSERTIONS "Enable assertions" ON)
-endif()
-
-option(LLVM_USE_INTEL_JITEVENTS
- "Use Intel JIT API to inform Intel(R) VTune(TM) Amplifier XE 2011 about JIT code"
- OFF)
-
-if( LLVM_USE_INTEL_JITEVENTS )
- # Verify we are on a supported platform
- if( NOT CMAKE_SYSTEM_NAME MATCHES "Windows" AND NOT CMAKE_SYSTEM_NAME MATCHES "Linux" )
- message(FATAL_ERROR
- "Intel JIT API support is available on Linux and Windows only.")
- endif()
-endif( LLVM_USE_INTEL_JITEVENTS )
-
-option(LLVM_USE_OPROFILE
- "Use opagent JIT interface to inform OProfile about JIT code" OFF)
-
-# If enabled, verify we are on a platform that supports oprofile.
-if( LLVM_USE_OPROFILE )
- if( NOT CMAKE_SYSTEM_NAME MATCHES "Linux" )
- message(FATAL_ERROR "OProfile support is available on Linux only.")
- endif( NOT CMAKE_SYSTEM_NAME MATCHES "Linux" )
-endif( LLVM_USE_OPROFILE )
-
-set(LLVM_USE_SANITIZER "" CACHE STRING
- "Define the sanitizer used to build binaries and tests.")
-
-# Define an option controlling whether we should build for 32-bit on 64-bit
-# platforms, where supported.
-if( CMAKE_SIZEOF_VOID_P EQUAL 8 AND NOT WIN32 )
- # TODO: support other platforms and toolchains.
- option(LLVM_BUILD_32_BITS "Build 32 bits executables and libraries." OFF)
-endif()
-
-# Define the default arguments to use with 'lit', and an option for the user to
-# override.
-set(LIT_ARGS_DEFAULT "-sv")
-if (MSVC OR XCODE)
- set(LIT_ARGS_DEFAULT "${LIT_ARGS_DEFAULT} --no-progress-bar")
-endif()
-set(LLVM_LIT_ARGS "${LIT_ARGS_DEFAULT}" CACHE STRING "Default options for lit")
-
-# On Win32 hosts, provide an option to specify the path to the GnuWin32 tools.
-if( WIN32 AND NOT CYGWIN )
- set(LLVM_LIT_TOOLS_DIR "" CACHE PATH "Path to GnuWin32 tools")
-endif()
-
-# Define options to control the inclusion and default build behavior for
-# components which may not strictly be necessary (tools, runtime, examples, and
-# tests).
-#
-# This is primarily to support building smaller or faster project files.
-option(LLVM_INCLUDE_TOOLS "Generate build targets for the LLVM tools." ON)
-option(LLVM_BUILD_TOOLS
- "Build the LLVM tools. If OFF, just generate build targets." ON)
-
-option(LLVM_INCLUDE_RUNTIME "Generate build targets for the LLVM runtimes" ON)
-option(LLVM_BUILD_RUNTIME
- "Build the LLVM runtime libraries. If OFF, just generate build targets." ON)
-
-option(LLVM_BUILD_EXAMPLES
- "Build the LLVM example programs. If OFF, just generate build targets." OFF)
-option(LLVM_INCLUDE_EXAMPLES "Generate build targets for the LLVM examples" ON)
-
-option(LLVM_BUILD_TESTS
- "Build LLVM unit tests. If OFF, just generate build targets." OFF)
-option(LLVM_INCLUDE_TESTS "Generate build targets for the LLVM unit tests." ON)
-
-# All options referred to from HandleLLVMOptions have to be specified
-# BEFORE this include, otherwise options will not be correctly set on
-# first cmake run
-include(config-ix)
-
-# By default, we target the host, but this can be overridden at CMake
-# invocation time.
-set(LLVM_DEFAULT_TARGET_TRIPLE "${LLVM_HOST_TRIPLE}" CACHE STRING
- "Default target for which LLVM will generate code." )
-set(TARGET_TRIPLE "${LLVM_DEFAULT_TARGET_TRIPLE}")
-
-include(HandleLLVMOptions)
-
-# Verify that we can find a Python interpreter,
-include(FindPythonInterp)
-if( NOT PYTHONINTERP_FOUND )
- message(FATAL_ERROR
-"Unable to find Python interpreter, required for builds and testing.
-
-Please install Python or specify the PYTHON_EXECUTABLE CMake variable.")
-endif()
-
-######
-# LLVMBuild Integration
-#
-# We use llvm-build to generate all the data required by the CMake based
-# build system in one swoop:
-#
-# - We generate a file (a CMake fragment) in the object root which contains
-# all the definitions that are required by CMake.
-#
-# - We generate the library table used by llvm-config.
-#
-# - We generate the dependencies for the CMake fragment, so that we will
-# automatically reconfigure outselves.
-
-set(LLVMBUILDTOOL "${LLVM_MAIN_SRC_DIR}/utils/llvm-build/llvm-build")
-set(LLVMCONFIGLIBRARYDEPENDENCIESINC
- "${LLVM_BINARY_DIR}/tools/llvm-config/LibraryDependencies.inc")
-set(LLVMBUILDCMAKEFRAG
- "${LLVM_BINARY_DIR}/LLVMBuild.cmake")
-
-# Create the list of optional components that are enabled
-if (LLVM_USE_INTEL_JITEVENTS)
- set(LLVMOPTIONALCOMPONENTS IntelJITEvents)
-endif (LLVM_USE_INTEL_JITEVENTS)
-if (LLVM_USE_OPROFILE)
- set(LLVMOPTIONALCOMPONENTS ${LLVMOPTIONALCOMPONENTS} OProfileJIT)
-endif (LLVM_USE_OPROFILE)
-
-message(STATUS "Constructing LLVMBuild project information")
-execute_process(
- COMMAND ${PYTHON_EXECUTABLE} ${LLVMBUILDTOOL}
- --native-target "${LLVM_NATIVE_ARCH}"
- --enable-targets "${LLVM_TARGETS_TO_BUILD}"
- --enable-optional-components "${LLVMOPTIONALCOMPONENTS}"
- --write-library-table ${LLVMCONFIGLIBRARYDEPENDENCIESINC}
- --write-cmake-fragment ${LLVMBUILDCMAKEFRAG}
- ERROR_VARIABLE LLVMBUILDOUTPUT
- ERROR_VARIABLE LLVMBUILDERRORS
- OUTPUT_STRIP_TRAILING_WHITESPACE
- ERROR_STRIP_TRAILING_WHITESPACE
- RESULT_VARIABLE LLVMBUILDRESULT)
-
-# On Win32, CMake doesn't properly handle piping the default output/error
-# streams into the GUI console. So, we explicitly catch and report them.
-if( NOT "${LLVMBUILDOUTPUT}" STREQUAL "")
- message(STATUS "llvm-build output: ${LLVMBUILDOUTPUT}")
-endif()
-if( NOT "${LLVMBUILDRESULT}" STREQUAL "0" )
- message(FATAL_ERROR
- "Unexpected failure executing llvm-build: ${LLVMBUILDERRORS}")
-endif()
-
-# Include the generated CMake fragment. This will define properties from the
-# LLVMBuild files in a format which is easy to consume from CMake, and will add
-# the dependencies so that CMake will reconfigure properly when the LLVMBuild
-# files change.
-include(${LLVMBUILDCMAKEFRAG})
-
-######
-
-# Configure all of the various header file fragments LLVM uses which depend on
-# configuration variables.
-set(LLVM_ENUM_ASM_PRINTERS "")
-set(LLVM_ENUM_ASM_PARSERS "")
-set(LLVM_ENUM_DISASSEMBLERS "")
-foreach(t ${LLVM_TARGETS_TO_BUILD})
- set( td ${LLVM_MAIN_SRC_DIR}/lib/Target/${t} )
- file(GLOB asmp_file "${td}/*AsmPrinter.cpp")
- if( asmp_file )
- set(LLVM_ENUM_ASM_PRINTERS
- "${LLVM_ENUM_ASM_PRINTERS}LLVM_ASM_PRINTER(${t})\n")
- endif()
- if( EXISTS ${td}/AsmParser/CMakeLists.txt )
- set(LLVM_ENUM_ASM_PARSERS
- "${LLVM_ENUM_ASM_PARSERS}LLVM_ASM_PARSER(${t})\n")
- endif()
- if( EXISTS ${td}/Disassembler/CMakeLists.txt )
- set(LLVM_ENUM_DISASSEMBLERS
- "${LLVM_ENUM_DISASSEMBLERS}LLVM_DISASSEMBLER(${t})\n")
- endif()
-endforeach(t)
-
-# Produce the target definition files, which provide a way for clients to easily
-# include various classes of targets.
-configure_file(
- ${LLVM_MAIN_INCLUDE_DIR}/llvm/Config/AsmPrinters.def.in
- ${LLVM_BINARY_DIR}/include/llvm/Config/AsmPrinters.def
- )
-configure_file(
- ${LLVM_MAIN_INCLUDE_DIR}/llvm/Config/AsmParsers.def.in
- ${LLVM_BINARY_DIR}/include/llvm/Config/AsmParsers.def
- )
-configure_file(
- ${LLVM_MAIN_INCLUDE_DIR}/llvm/Config/Disassemblers.def.in
- ${LLVM_BINARY_DIR}/include/llvm/Config/Disassemblers.def
- )
-configure_file(
- ${LLVM_MAIN_INCLUDE_DIR}/llvm/Config/Targets.def.in
- ${LLVM_BINARY_DIR}/include/llvm/Config/Targets.def
- )
-
-# Configure the three LLVM configuration header files.
-configure_file(
- ${LLVM_MAIN_INCLUDE_DIR}/llvm/Config/config.h.cmake
- ${LLVM_BINARY_DIR}/include/llvm/Config/config.h)
-configure_file(
- ${LLVM_MAIN_INCLUDE_DIR}/llvm/Config/llvm-config.h.cmake
- ${LLVM_BINARY_DIR}/include/llvm/Config/llvm-config.h)
-configure_file(
- ${LLVM_MAIN_INCLUDE_DIR}/llvm/Support/DataTypes.h.cmake
- ${LLVM_BINARY_DIR}/include/llvm/Support/DataTypes.h)
-
-set( CMAKE_RUNTIME_OUTPUT_DIRECTORY ${LLVM_TOOLS_BINARY_DIR} )
-set( CMAKE_LIBRARY_OUTPUT_DIRECTORY ${LLVM_BINARY_DIR}/lib )
-set( CMAKE_ARCHIVE_OUTPUT_DIRECTORY ${LLVM_BINARY_DIR}/lib )
-
-set(CMAKE_INCLUDE_CURRENT_DIR ON)
-
-include_directories( ${LLVM_BINARY_DIR}/include ${LLVM_MAIN_INCLUDE_DIR})
-
-if( ${CMAKE_SYSTEM_NAME} MATCHES FreeBSD )
- # On FreeBSD, /usr/local/* is not used by default. In order to build LLVM
- # with libxml2, iconv.h, etc., we must add /usr/local paths.
- include_directories("/usr/local/include")
- link_directories("/usr/local/lib")
-endif( ${CMAKE_SYSTEM_NAME} MATCHES FreeBSD )
-
-if( ${CMAKE_SYSTEM_NAME} MATCHES SunOS )
- SET(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -include llvm/Support/Solaris.h")
-endif( ${CMAKE_SYSTEM_NAME} MATCHES SunOS )
-
-# Make sure we don't get -rdynamic in every binary. For those that need it,
-# use set_target_properties(target PROPERTIES ENABLE_EXPORTS 1)
-set(CMAKE_SHARED_LIBRARY_LINK_CXX_FLAGS "")
-
-include(AddLLVM)
-include(TableGen)
-
-if( MINGW )
- # People report that -O3 is unreliable on MinGW. The traditional
- # build also uses -O2 for that reason:
- llvm_replace_compiler_option(CMAKE_CXX_FLAGS_RELEASE "-O3" "-O2")
-endif()
-
-# Put this before tblgen. Else we have a circular dependence.
-add_subdirectory(lib/Support)
-add_subdirectory(lib/TableGen)
-
-add_subdirectory(utils/TableGen)
-
-add_subdirectory(include/llvm)
-
-add_subdirectory(lib)
-
-add_subdirectory(utils/FileCheck)
-add_subdirectory(utils/FileUpdate)
-add_subdirectory(utils/count)
-add_subdirectory(utils/not)
-add_subdirectory(utils/llvm-lit)
-add_subdirectory(utils/yaml-bench)
-
-add_subdirectory(projects)
-
-if( LLVM_INCLUDE_TOOLS )
- add_subdirectory(tools)
-endif()
-
-if( LLVM_INCLUDE_RUNTIME )
- add_subdirectory(runtime)
-endif()
-
-if( LLVM_INCLUDE_EXAMPLES )
- add_subdirectory(examples)
-endif()
-
-if( LLVM_INCLUDE_TESTS )
- add_subdirectory(test)
- add_subdirectory(utils/unittest)
- add_subdirectory(unittests)
- if (MSVC)
- # This utility is used to prevent crashing tests from calling Dr. Watson on
- # Windows.
- add_subdirectory(utils/KillTheDoctor)
- endif()
-
- # Add a global check rule now that all subdirectories have been traversed
- # and we know the total set of lit testsuites.
- get_property(LLVM_LIT_TESTSUITES GLOBAL PROPERTY LLVM_LIT_TESTSUITES)
- get_property(LLVM_LIT_PARAMS GLOBAL PROPERTY LLVM_LIT_PARAMS)
- get_property(LLVM_LIT_DEPENDS GLOBAL PROPERTY LLVM_LIT_DEPENDS)
- get_property(LLVM_LIT_EXTRA_ARGS GLOBAL PROPERTY LLVM_LIT_EXTRA_ARGS)
- add_lit_target(check-all
- "Running all regression tests"
- ${LLVM_LIT_TESTSUITES}
- PARAMS ${LLVM_LIT_PARAMS}
- DEPENDS ${LLVM_LIT_DEPENDS}
- ARGS ${LLVM_LIT_EXTRA_ARGS}
- )
-endif()
-
-add_subdirectory(cmake/modules)
-
-install(DIRECTORY include/
- DESTINATION include
- FILES_MATCHING
- PATTERN "*.def"
- PATTERN "*.h"
- PATTERN "*.td"
- PATTERN "*.inc"
- PATTERN "LICENSE.TXT"
- PATTERN ".svn" EXCLUDE
- )
-
-install(DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}/include/
- DESTINATION include
- FILES_MATCHING
- PATTERN "*.def"
- PATTERN "*.h"
- PATTERN "*.gen"
- PATTERN "*.inc"
- # Exclude include/llvm/CMakeFiles/intrinsics_gen.dir, matched by "*.def"
- PATTERN "CMakeFiles" EXCLUDE
- PATTERN ".svn" EXCLUDE
- )
-
-# TODO: make and install documentation.
-
-set(CPACK_PACKAGE_VENDOR "LLVM")
-set(CPACK_PACKAGE_VERSION_MAJOR ${LLVM_VERSION_MAJOR})
-set(CPACK_PACKAGE_VERSION_MINOR ${LLVM_VERSION_MINOR})
-add_version_info_from_vcs(CPACK_PACKAGE_VERSION_PATCH)
-include(CPack)
-
-# Workaround for MSVS10 to avoid the Dialog Hell
-# FIXME: This could be removed with future version of CMake.
-if(MSVC_VERSION EQUAL 1600)
- set(LLVM_SLN_FILENAME "${CMAKE_CURRENT_BINARY_DIR}/LLVM.sln")
- if( EXISTS "${LLVM_SLN_FILENAME}" )
- file(APPEND "${LLVM_SLN_FILENAME}" "\n# This should be regenerated!\n")
- endif()
-endif()
Deleted: trunk/contrib/llvm/CODE_OWNERS.TXT
===================================================================
--- trunk/contrib/llvm/CODE_OWNERS.TXT 2015-06-21 18:59:54 UTC (rev 7065)
+++ trunk/contrib/llvm/CODE_OWNERS.TXT 2015-06-21 19:01:11 UTC (rev 7066)
@@ -1,135 +0,0 @@
-This file is a list of the people responsible for ensuring that patches for a
-particular part of LLVM are reviewed, either by themself or by someone else.
-They are also the gatekeepers for their part of LLVM, with the final word on
-what goes in or not.
-
-The list is sorted by surname and formatted to allow easy grepping and
-beautification by scripts. The fields are: name (N), email (E), web-address
-(W), PGP key ID and fingerprint (P), description (D), and snail-mail address
-(S).
-
-N: Joe Abbey
-E: jabbey at arxan.com
-D: LLVM Bitcode (lib/Bitcode/* include/llvm/Bitcode/*)
-
-N: Owen Anderson
-E: resistor at mac.com
-D: SelectionDAG (lib/CodeGen/SelectionDAG/*)
-
-N: Rafael Avila de Espindola
-E: rafael.espindola at gmail.com
-D: Gold plugin (tools/gold/*)
-
-N: Chandler Carruth
-E: chandlerc at gmail.com
-E: chandlerc at google.com
-D: Config, ADT, Support, inlining & related passes, SROA/mem2reg & related passes, CMake, library layering
-
-N: Evan Cheng
-E: evan.cheng at apple.com
-D: ARM target, parts of code generator not covered by someone else
-
-N: Eric Christopher
-E: echristo at gmail.com
-D: Debug Information, autotools/configure/make build, inline assembly
-
-N: Greg Clayton
-D: LLDB
-
-N: Peter Collingbourne
-D: libclc
-
-N: Anshuman Dasgupta
-E: adasgupt at codeaurora.org
-D: Hexagon Backend
-
-N: Hal Finkel
-E: hfinkel at anl.gov
-D: BBVectorize and the PowerPC target
-
-N: Venkatraman Govindaraju
-E: venkatra at cs.wisc.edu
-D: Sparc Backend (lib/Target/Sparc/*)
-
-N: Tobias Grosser
-D: Polly
-
-N: James Grosbach
-E: grosbach at apple.com
-D: MC layer
-
-N: Howard Hinnant
-D: libc++
-
-N: Justin Holewinski
-E: jholewinski at nvidia.com
-D: NVPTX Target (lib/Target/NVPTX/*)
-
-N: Andy Kaylor
-E: andrew.kaylor at intel.com
-D: MCJIT, RuntimeDyld and JIT event listeners
-
-N: Galina Kistanova
-E: gkistanova at gmail.com
-D: LLVM Buildbot
-
-N: Anton Korobeynikov
-E: anton at korobeynikov.info
-D: Exception handling, Windows codegen, ARM EABI
-
-N: Benjamin Kramer
-E: benny.kra at gmail.com
-D: DWARF Parser
-
-N: Sergei Larin
-E: slarin at codeaurora.org
-D: VLIW Instruction Scheduling, Packetization
-
-N: Chris Lattner
-E: sabre at nondot.org
-W: http://nondot.org/~sabre/
-D: Everything not covered by someone else
-
-N: Tim Northover
-E: Tim.Northover at arm.com
-D: AArch64 backend
-
-N: Jakob Olesen
-D: Register allocators and TableGen
-
-N: Richard Osborne
-E: richard at xmos.com
-D: XCore Backend
-
-N: Chad Rosier
-E: mcrosier at apple.com
-D: Fast-Isel
-
-N: Nadav Rotem
-E: nrotem at apple.com
-D: X86 Backend, Loop Vectorizer
-
-N: Richard Sandiford
-E: rsandifo at linux.vnet.ibm.com
-D: SystemZ Backend
-
-N: Duncan Sands
-E: baldrick at free.fr
-D: DragonEgg
-
-N: Michael Spencer
-E: bigcheesegs at gmail.com
-D: Windows parts of Support, Object, ar, nm, objdump, ranlib, size
-
-N: Tom Stellard
-E: thomas.stellard at amd.com
-E: mesa-dev at lists.freedesktop.org
-D: R600 Backend
-
-N: Andrew Trick
-E: atrick at apple.com
-D: IndVar Simplify, Loop Strength Reduction, Instruction Scheduling
-
-N: Bill Wendling
-E: wendling at apple.com
-D: libLTO, IR Linker
Deleted: trunk/contrib/llvm/CREDITS.TXT
===================================================================
--- trunk/contrib/llvm/CREDITS.TXT 2015-06-21 18:59:54 UTC (rev 7065)
+++ trunk/contrib/llvm/CREDITS.TXT 2015-06-21 19:01:11 UTC (rev 7066)
@@ -1,437 +0,0 @@
-This file is a partial list of people who have contributed to the LLVM
-project. If you have contributed a patch or made some other contribution to
-LLVM, please submit a patch to this file to add yourself, and it will be
-done!
-
-The list is sorted by surname and formatted to allow easy grepping and
-beautification by scripts. The fields are: name (N), email (E), web-address
-(W), PGP key ID and fingerprint (P), description (D), snail-mail address
-(S), and (I) IRC handle.
-
-
-N: Vikram Adve
-E: vadve at cs.uiuc.edu
-W: http://www.cs.uiuc.edu/~vadve/
-D: The Sparc64 backend, provider of much wisdom, and motivator for LLVM
-
-N: Owen Anderson
-E: resistor at mac.com
-D: LCSSA pass and related LoopUnswitch work
-D: GVNPRE pass, DataLayout refactoring, random improvements
-
-N: Henrik Bach
-D: MingW Win32 API portability layer
-
-N: Aaron Ballman
-E: aaron at aaronballman.com
-D: __declspec attributes, Windows support, general bug fixing
-
-N: Nate Begeman
-E: natebegeman at mac.com
-D: PowerPC backend developer
-D: Target-independent code generator and analysis improvements
-
-N: Daniel Berlin
-E: dberlin at dberlin.org
-D: ET-Forest implementation.
-D: Sparse bitmap
-
-N: David Blaikie
-E: dblaikie at gmail.com
-D: General bug fixing/fit & finish, mostly in Clang
-
-N: Neil Booth
-E: neil at daikokuya.co.uk
-D: APFloat implementation.
-
-N: Misha Brukman
-E: brukman+llvm at uiuc.edu
-W: http://misha.brukman.net
-D: Portions of X86 and Sparc JIT compilers, PowerPC backend
-D: Incremental bitcode loader
-
-N: Cameron Buschardt
-E: buschard at uiuc.edu
-D: The `mem2reg' pass - promotes values stored in memory to registers
-
-N: Brendon Cahoon
-E: bcahoon at codeaurora.org
-D: Loop unrolling with run-time trip counts.
-
-N: Chandler Carruth
-E: chandlerc at gmail.com
-E: chandlerc at google.com
-D: Hashing algorithms and interfaces
-D: Inline cost analysis
-D: Machine block placement pass
-D: SROA
-
-N: Casey Carter
-E: ccarter at uiuc.edu
-D: Fixes to the Reassociation pass, various improvement patches
-
-N: Evan Cheng
-E: evan.cheng at apple.com
-D: ARM and X86 backends
-D: Instruction scheduler improvements
-D: Register allocator improvements
-D: Loop optimizer improvements
-D: Target-independent code generator improvements
-
-N: Dan Villiom Podlaski Christiansen
-E: danchr at gmail.com
-E: danchr at cs.au.dk
-W: http://villiom.dk
-D: LLVM Makefile improvements
-D: Clang diagnostic & driver tweaks
-S: Aarhus, Denmark
-
-N: Jeff Cohen
-E: jeffc at jolt-lang.org
-W: http://jolt-lang.org
-D: Native Win32 API portability layer
-
-N: John T. Criswell
-E: criswell at uiuc.edu
-D: Original Autoconf support, documentation improvements, bug fixes
-
-N: Anshuman Dasgupta
-E: adasgupt at codeaurora.org
-D: Deterministic finite automaton based infrastructure for VLIW packetization
-
-N: Stefanus Du Toit
-E: stefanus.du.toit at intel.com
-D: Bug fixes and minor improvements
-
-N: Rafael Avila de Espindola
-E: rafael.espindola at gmail.com
-D: The ARM backend
-
-N: Alkis Evlogimenos
-E: alkis at evlogimenos.com
-D: Linear scan register allocator, many codegen improvements, Java frontend
-
-N: Hal Finkel
-E: hfinkel at anl.gov
-D: Basic-block autovectorization, PowerPC backend improvements
-
-N: Ryan Flynn
-E: pizza at parseerror.com
-D: Miscellaneous bug fixes
-
-N: Brian Gaeke
-E: gaeke at uiuc.edu
-W: http://www.students.uiuc.edu/~gaeke/
-D: Portions of X86 static and JIT compilers; initial SparcV8 backend
-D: Dynamic trace optimizer
-D: FreeBSD/X86 compatibility fixes, the llvm-nm tool
-
-N: Nicolas Geoffray
-E: nicolas.geoffray at lip6.fr
-W: http://www-src.lip6.fr/homepages/Nicolas.Geoffray/
-D: PPC backend fixes for Linux
-
-N: Louis Gerbarg
-D: Portions of the PowerPC backend
-
-N: Saem Ghani
-E: saemghani at gmail.com
-D: Callgraph class cleanups
-
-N: Mikhail Glushenkov
-E: foldr at codedgers.com
-D: Author of llvmc2
-
-N: Dan Gohman
-E: dan433584 at gmail.com
-D: Miscellaneous bug fixes
-
-N: David Goodwin
-E: david at goodwinz.net
-D: Thumb-2 code generator
-
-N: David Greene
-E: greened at obbligato.org
-D: Miscellaneous bug fixes
-D: Register allocation refactoring
-
-N: Gabor Greif
-E: ggreif at gmail.com
-D: Improvements for space efficiency
-
-N: James Grosbach
-E: grosbach at apple.com
-D: SjLj exception handling support
-D: General fixes and improvements for the ARM back-end
-D: MCJIT
-D: ARM integrated assembler and assembly parser
-
-N: Lang Hames
-E: lhames at gmail.com
-D: PBQP-based register allocator
-
-N: Gordon Henriksen
-E: gordonhenriksen at mac.com
-D: Pluggable GC support
-D: C interface
-D: Ocaml bindings
-
-N: Raul Fernandes Herbster
-E: raul at dsc.ufcg.edu.br
-D: JIT support for ARM
-
-N: Paolo Invernizzi
-E: arathorn at fastwebnet.it
-D: Visual C++ compatibility fixes
-
-N: Patrick Jenkins
-E: patjenk at wam.umd.edu
-D: Nightly Tester
-
-N: Dale Johannesen
-E: dalej at apple.com
-D: ARM constant islands improvements
-D: Tail merging improvements
-D: Rewrite X87 back end
-D: Use APFloat for floating point constants widely throughout compiler
-D: Implement X87 long double
-
-N: Brad Jones
-E: kungfoomaster at nondot.org
-D: Support for packed types
-
-N: Rod Kay
-E: rkay at auroraux.org
-D: Author of LLVM Ada bindings
-
-N: Eric Kidd
-W: http://randomhacks.net/
-D: llvm-config script
-
-N: Anton Korobeynikov
-E: asl at math.spbu.ru
-D: Mingw32 fixes, cross-compiling support, stdcall/fastcall calling conv.
-D: x86/linux PIC codegen, aliases, regparm/visibility attributes
-D: Switch lowering refactoring
-
-N: Sumant Kowshik
-E: kowshik at uiuc.edu
-D: Author of the original C backend
-
-N: Benjamin Kramer
-E: benny.kra at gmail.com
-D: Miscellaneous bug fixes
-
-N: Sundeep Kushwaha
-E: sundeepk at codeaurora.org
-D: Implemented DFA-based target independent VLIW packetizer
-
-N: Christopher Lamb
-E: christopher.lamb at gmail.com
-D: aligned load/store support, parts of noalias and restrict support
-D: vreg subreg infrastructure, X86 codegen improvements based on subregs
-D: address spaces
-
-N: Jim Laskey
-E: jlaskey at apple.com
-D: Improvements to the PPC backend, instruction scheduling
-D: Debug and Dwarf implementation
-D: Auto upgrade mangler
-D: llvm-gcc4 svn wrangler
-
-N: Chris Lattner
-E: sabre at nondot.org
-W: http://nondot.org/~sabre/
-D: Primary architect of LLVM
-
-N: Tanya Lattner (Tanya Brethour)
-E: tonic at nondot.org
-W: http://nondot.org/~tonic/
-D: The initial llvm-ar tool, converted regression testsuite to dejagnu
-D: Modulo scheduling in the SparcV9 backend
-D: Release manager (1.7+)
-
-N: Sylvestre Ledru
-E: sylvestre at debian.org
-W: http://sylvesre.ledru.info/
-D: Debian and Ubuntu packaging
-D: Continous integration with jenkins
-
-N: Andrew Lenharth
-E: alenhar2 at cs.uiuc.edu
-W: http://www.lenharth.org/~andrewl/
-D: Alpha backend
-D: Sampling based profiling
-
-N: Nick Lewycky
-E: nicholas at mxc.ca
-D: PredicateSimplifier pass
-
-N: Tony Linthicum, et. al.
-E: tlinth at codeaurora.org
-D: Backend for Qualcomm's Hexagon VLIW processor.
-
-N: Bruno Cardoso Lopes
-E: bruno.cardoso at gmail.com
-W: http://www.brunocardoso.org
-D: The Mips backend
-
-N: Duraid Madina
-E: duraid at octopus.com.au
-W: http://kinoko.c.u-tokyo.ac.jp/~duraid/
-D: IA64 backend, BigBlock register allocator
-
-N: John McCall
-E: rjmccall at apple.com
-D: Clang semantic analysis and IR generation
-
-N: Michael McCracken
-E: michael.mccracken at gmail.com
-D: Line number support for llvmgcc
-
-N: Vladimir Merzliakov
-E: wanderer at rsu.ru
-D: Test suite fixes for FreeBSD
-
-N: Scott Michel
-E: scottm at aero.org
-D: Added STI Cell SPU backend.
-
-N: Kai Nacke
-E: kai at redstar.de
-D: Support for implicit TLS model used with MS VC runtime
-
-N: Takumi Nakamura
-E: geek4civic at gmail.com
-E: chapuni at hf.rim.or.jp
-D: Cygwin and MinGW support.
-D: Win32 tweaks.
-S: Yokohama, Japan
-
-N: Edward O'Callaghan
-E: eocallaghan at auroraux.org
-W: http://www.auroraux.org
-D: Add Clang support with various other improvements to utils/NewNightlyTest.pl
-D: Fix and maintain Solaris & AuroraUX support for llvm, various build warnings
-D: and error clean ups.
-
-N: Morten Ofstad
-E: morten at hue.no
-D: Visual C++ compatibility fixes
-
-N: Jakob Stoklund Olesen
-E: stoklund at 2pi.dk
-D: Machine code verifier
-D: Blackfin backend
-D: Fast register allocator
-D: Greedy register allocator
-
-N: Richard Osborne
-E: richard at xmos.com
-D: XCore backend
-
-N: Devang Patel
-E: dpatel at apple.com
-D: LTO tool, PassManager rewrite, Loop Pass Manager, Loop Rotate
-D: GCC PCH Integration (llvm-gcc), llvm-gcc improvements
-D: Optimizer improvements, Loop Index Split
-
-N: Wesley Peck
-E: peckw at wesleypeck.com
-W: http://wesleypeck.com/
-D: MicroBlaze backend
-
-N: Francois Pichet
-E: pichet2000 at gmail.com
-D: MSVC support
-
-N: Vladimir Prus
-W: http://vladimir_prus.blogspot.com
-E: ghost at cs.msu.su
-D: Made inst_iterator behave like a proper iterator, LowerConstantExprs pass
-
-N: Kalle Raiskila
-E: kalle.rasikila at nokia.com
-D: Some bugfixes to CellSPU
-
-N: Xerxes Ranby
-E: xerxes at zafena.se
-D: Cmake dependency chain and various bug fixes
-
-N: Alex Rosenberg
-E: alexr at leftfield.org
-I: arosenberg
-D: ARM calling conventions rewrite, hard float support
-
-N: Chad Rosier
-E: mcrosier at apple.com
-D: ARM fast-isel improvements
-D: Performance monitoring
-
-N: Nadav Rotem
-E: nrotem at apple.com
-D: X86 code generation improvements, Loop Vectorizer.
-
-N: Roman Samoilov
-E: roman at codedgers.com
-D: MSIL backend
-
-N: Duncan Sands
-E: baldrick at free.fr
-I: baldrick
-D: Ada support in llvm-gcc
-D: Dragonegg plugin
-D: Exception handling improvements
-D: Type legalizer rewrite
-
-N: Ruchira Sasanka
-E: sasanka at uiuc.edu
-D: Graph coloring register allocator for the Sparc64 backend
-
-N: Arnold Schwaighofer
-E: arnold.schwaighofer at gmail.com
-D: Tail call optimization for the x86 backend
-
-N: Shantonu Sen
-E: ssen at apple.com
-D: Miscellaneous bug fixes
-
-N: Anand Shukla
-E: ashukla at cs.uiuc.edu
-D: The `paths' pass
-
-N: Michael J. Spencer
-E: bigcheesegs at gmail.com
-D: Shepherding Windows COFF support into MC.
-D: Lots of Windows stuff.
-
-N: Reid Spencer
-E: rspencer at reidspencer.com
-W: http://reidspencer.com/
-D: Lots of stuff, see: http://wiki.llvm.org/index.php/User:Reid
-
-N: Craig Topper
-E: craig.topper at gmail.com
-D: X86 codegen and disassembler improvements. AVX2 support.
-
-N: Edwin Torok
-E: edwintorok at gmail.com
-D: Miscellaneous bug fixes
-
-N: Adam Treat
-E: manyoso at yahoo.com
-D: C++ bugs filed, and C++ front-end bug fixes.
-
-N: Lauro Ramos Venancio
-E: lauro.venancio at indt.org.br
-D: ARM backend improvements
-D: Thread Local Storage implementation
-
-N: Bill Wendling
-E: wendling at apple.com
-D: Release manager
-D: Bunches of stuff
-
-N: Bob Wilson
-E: bob.wilson at acm.org
-D: Advanced SIMD (NEON) support in the ARM backend
Deleted: trunk/contrib/llvm/LLVMBuild.txt
===================================================================
--- trunk/contrib/llvm/LLVMBuild.txt 2015-06-21 18:59:54 UTC (rev 7065)
+++ trunk/contrib/llvm/LLVMBuild.txt 2015-06-21 19:01:11 UTC (rev 7066)
@@ -1,24 +0,0 @@
-;===- ./LLVMBuild.txt ------------------------------------------*- Conf -*--===;
-;
-; The LLVM Compiler Infrastructure
-;
-; This file is distributed under the University of Illinois Open Source
-; License. See LICENSE.TXT for details.
-;
-;===------------------------------------------------------------------------===;
-;
-; This is an LLVMBuild description file for the components in this subdirectory.
-;
-; For more information on the LLVMBuild system, please see:
-;
-; http://llvm.org/docs/LLVMBuild.html
-;
-;===------------------------------------------------------------------------===;
-
-[common]
-subdirectories = bindings docs examples lib projects runtime tools utils
-
-[component_0]
-type = Group
-name = Miscellaneous
-parent = $ROOT
Deleted: trunk/contrib/llvm/Makefile
===================================================================
--- trunk/contrib/llvm/Makefile 2015-06-21 18:59:54 UTC (rev 7065)
+++ trunk/contrib/llvm/Makefile 2015-06-21 19:01:11 UTC (rev 7066)
@@ -1,285 +0,0 @@
-#===- ./Makefile -------------------------------------------*- Makefile -*--===#
-#
-# The LLVM Compiler Infrastructure
-#
-# This file is distributed under the University of Illinois Open Source
-# License. See LICENSE.TXT for details.
-#
-#===------------------------------------------------------------------------===#
-
-LEVEL := .
-
-# Top-Level LLVM Build Stages:
-# 1. Build lib/Support and lib/TableGen, which are used by utils (tblgen).
-# 2. Build utils, which is used by IR.
-# 3. Build IR, which builds the Intrinsics.inc file used by libs.
-# 4. Build libs, which are needed by llvm-config.
-# 5. Build llvm-config, which determines inter-lib dependencies for tools.
-# 6. Build tools, runtime, docs.
-#
-# When cross-compiling, there are some things (tablegen) that need to
-# be build for the build system first.
-
-# If "RC_ProjectName" exists in the environment, and its value is
-# "llvmCore", then this is an "Apple-style" build; search for
-# "Apple-style" in the comments for more info. Anything else is a
-# normal build.
-ifneq ($(findstring llvmCore, $(RC_ProjectName)),llvmCore) # Normal build (not "Apple-style").
-
-ifeq ($(BUILD_DIRS_ONLY),1)
- DIRS := lib/Support lib/TableGen utils tools/llvm-config
- OPTIONAL_DIRS := tools/clang/utils/TableGen
-else
- DIRS := lib/Support lib/TableGen utils lib/IR lib tools/llvm-shlib \
- tools/llvm-config tools runtime docs unittests
- OPTIONAL_DIRS := projects bindings
-endif
-
-ifeq ($(BUILD_EXAMPLES),1)
- OPTIONAL_DIRS += examples
-endif
-
-EXTRA_DIST := test unittests llvm.spec include win32 Xcode
-
-include $(LEVEL)/Makefile.config
-
-ifneq ($(ENABLE_SHARED),1)
- DIRS := $(filter-out tools/llvm-shlib, $(DIRS))
-endif
-
-ifneq ($(ENABLE_DOCS),1)
- DIRS := $(filter-out docs, $(DIRS))
-endif
-
-ifeq ($(MAKECMDGOALS),libs-only)
- DIRS := $(filter-out tools runtime docs, $(DIRS))
- OPTIONAL_DIRS :=
-endif
-
-ifeq ($(MAKECMDGOALS),install-libs)
- DIRS := $(filter-out tools runtime docs, $(DIRS))
- OPTIONAL_DIRS := $(filter bindings, $(OPTIONAL_DIRS))
-endif
-
-ifeq ($(MAKECMDGOALS),tools-only)
- DIRS := $(filter-out runtime docs, $(DIRS))
- OPTIONAL_DIRS :=
-endif
-
-ifeq ($(MAKECMDGOALS),install-clang)
- DIRS := tools/clang/tools/driver tools/clang/lib/Headers \
- tools/clang/tools/libclang \
- tools/clang/tools/c-index-test \
- tools/clang/include/clang-c \
- tools/clang/runtime tools/clang/docs \
- tools/lto runtime
- OPTIONAL_DIRS :=
- NO_INSTALL = 1
-endif
-
-ifeq ($(MAKECMDGOALS),clang-only)
- DIRS := $(filter-out tools docs unittests, $(DIRS)) \
- tools/clang tools/lto
- OPTIONAL_DIRS :=
-endif
-
-ifeq ($(MAKECMDGOALS),unittests)
- DIRS := $(filter-out tools runtime docs, $(DIRS)) utils unittests
- OPTIONAL_DIRS :=
-endif
-
-# Use NO_INSTALL define of the Makefile of each directory for deciding
-# if the directory is installed or not
-ifeq ($(MAKECMDGOALS),install)
- OPTIONAL_DIRS := $(filter bindings, $(OPTIONAL_DIRS))
-endif
-
-# Don't build unittests when ONLY_TOOLS is set.
-ifneq ($(ONLY_TOOLS),)
- DIRS := $(filter-out unittests, $(DIRS))
-endif
-
-# If we're cross-compiling, build the build-hosted tools first
-ifeq ($(LLVM_CROSS_COMPILING),1)
-all:: cross-compile-build-tools
-
-clean::
- $(Verb) rm -rf BuildTools
-
-cross-compile-build-tools:
- $(Verb) if [ ! -f BuildTools/Makefile ]; then \
- $(MKDIR) BuildTools; \
- cd BuildTools ; \
- unset CFLAGS ; \
- unset CXXFLAGS ; \
- unset SDKROOT ; \
- unset UNIVERSAL_SDK_PATH ; \
- $(PROJ_SRC_DIR)/configure --build=$(BUILD_TRIPLE) \
- --host=$(BUILD_TRIPLE) --target=$(BUILD_TRIPLE) \
- --disable-polly ; \
- cd .. ; \
- fi; \
- ($(MAKE) -C BuildTools \
- BUILD_DIRS_ONLY=1 \
- UNIVERSAL= \
- UNIVERSAL_SDK_PATH= \
- SDKROOT= \
- TARGET_NATIVE_ARCH="$(TARGET_NATIVE_ARCH)" \
- TARGETS_TO_BUILD="$(TARGETS_TO_BUILD)" \
- ENABLE_OPTIMIZED=$(ENABLE_OPTIMIZED) \
- ENABLE_PROFILING=$(ENABLE_PROFILING) \
- ENABLE_COVERAGE=$(ENABLE_COVERAGE) \
- DISABLE_ASSERTIONS=$(DISABLE_ASSERTIONS) \
- ENABLE_EXPENSIVE_CHECKS=$(ENABLE_EXPENSIVE_CHECKS) \
- ENABLE_LIBCPP=$(ENABLE_LIBCPP) \
- CFLAGS= \
- CXXFLAGS= \
- ) || exit 1;
-endif
-
-# Include the main makefile machinery.
-include $(LLVM_SRC_ROOT)/Makefile.rules
-
-# Specify options to pass to configure script when we're
-# running the dist-check target
-DIST_CHECK_CONFIG_OPTIONS = --with-llvmgccdir=$(LLVMGCCDIR)
-
-.PHONY: debug-opt-prof
-debug-opt-prof:
- $(Echo) Building Debug Version
- $(Verb) $(MAKE)
- $(Echo)
- $(Echo) Building Optimized Version
- $(Echo)
- $(Verb) $(MAKE) ENABLE_OPTIMIZED=1
- $(Echo)
- $(Echo) Building Profiling Version
- $(Echo)
- $(Verb) $(MAKE) ENABLE_PROFILING=1
-
-dist-hook::
- $(Echo) Eliminating files constructed by configure
- $(Verb) $(RM) -f \
- $(TopDistDir)/include/llvm/Config/config.h \
- $(TopDistDir)/include/llvm/Support/DataTypes.h
-
-clang-only: all
-tools-only: all
-libs-only: all
-install-clang: install
-install-libs: install
-
-# If SHOW_DIAGNOSTICS is enabled, clear the diagnostics file first.
-ifeq ($(SHOW_DIAGNOSTICS),1)
-clean-diagnostics:
- $(Verb) rm -f $(LLVM_OBJ_ROOT)/$(BuildMode)/diags
-.PHONY: clean-diagnostics
-
-all-local:: clean-diagnostics
-endif
-
-#------------------------------------------------------------------------
-# Make sure the generated files are up-to-date. This must be kept in
-# sync with the AC_CONFIG_HEADER and AC_CONFIG_FILE invocations in
-# autoconf/configure.ac.
-# Note that Makefile.config is covered by its own separate rule
-# in Makefile.rules where it can be reused by sub-projects.
-#------------------------------------------------------------------------
-FilesToConfig := \
- bindings/ocaml/llvm/META.llvm \
- docs/doxygen.cfg \
- llvm.spec \
- include/llvm/Config/config.h \
- include/llvm/Config/llvm-config.h \
- include/llvm/Config/Targets.def \
- include/llvm/Config/AsmPrinters.def \
- include/llvm/Config/AsmParsers.def \
- include/llvm/Config/Disassemblers.def \
- include/llvm/Support/DataTypes.h
-FilesToConfigPATH := $(addprefix $(LLVM_OBJ_ROOT)/,$(FilesToConfig))
-
-all-local:: $(FilesToConfigPATH)
-$(FilesToConfigPATH) : $(LLVM_OBJ_ROOT)/% : $(LLVM_SRC_ROOT)/%.in
- $(Echo) Regenerating $*
- $(Verb) cd $(LLVM_OBJ_ROOT) && $(ConfigStatusScript) $*
-.PRECIOUS: $(FilesToConfigPATH)
-
-# NOTE: This needs to remain as the last target definition in this file so
-# that it gets executed last.
-ifneq ($(BUILD_DIRS_ONLY),1)
-all::
- $(Echo) '*****' Completed $(BuildMode) Build
-ifneq ($(ENABLE_OPTIMIZED),1)
- $(Echo) '*****' Note: Debug build can be 10 times slower than an
- $(Echo) '*****' optimized build. Use 'make ENABLE_OPTIMIZED=1' to
- $(Echo) '*****' make an optimized build. Alternatively you can
- $(Echo) '*****' configure with --enable-optimized.
-ifeq ($(SHOW_DIAGNOSTICS),1)
- $(Verb) if test -s $(LLVM_OBJ_ROOT)/$(BuildMode)/diags; then \
- $(LLVM_SRC_ROOT)/utils/clang-parse-diagnostics-file -a \
- $(LLVM_OBJ_ROOT)/$(BuildMode)/diags; \
- fi
-endif
-endif
-endif
-
-check-llvm2cpp:
- $(Verb)$(MAKE) check TESTSUITE=Feature RUNLLVM2CPP=1
-
-srpm: $(LLVM_OBJ_ROOT)/llvm.spec
- rpmbuild -bs $(LLVM_OBJ_ROOT)/llvm.spec
-
-rpm: $(LLVM_OBJ_ROOT)/llvm.spec
- rpmbuild -bb --target $(TARGET_TRIPLE) $(LLVM_OBJ_ROOT)/llvm.spec
-
-show-footprint:
- $(Verb) du -sk $(LibDir)
- $(Verb) du -sk $(ToolDir)
- $(Verb) du -sk $(ExmplDir)
- $(Verb) du -sk $(ObjDir)
-
-build-for-llvm-top:
- $(Verb) if test ! -f ./config.status ; then \
- ./configure --prefix="$(LLVM_TOP)/install" \
- --with-llvm-gcc="$(LLVM_TOP)/llvm-gcc" ; \
- fi
- $(Verb) $(MAKE) tools-only
-
-SVN = svn
-SVN-UPDATE-OPTIONS =
-AWK = awk
-
-# Multiline variable defining a recursive function for finding svn repos rooted at
-# a given path. svnup() requires one argument: the root to search from.
-define SUB_SVN_DIRS
-svnup() {
- dirs=`svn status --no-ignore $$1 | awk '/I|\? / {print $$2}' | LC_ALL=C xargs svn info 2>/dev/null | awk '/^Path:\ / {print $$2}'`;
- if [ "$$dirs" = "" ]; then
- return;
- fi;
- for f in $$dirs; do
- echo $$f;
- svnup $$f;
- done
-}
-endef
-export SUB_SVN_DIRS
-
-update:
- $(SVN) $(SVN-UPDATE-OPTIONS) update $(LLVM_SRC_ROOT)
- @eval $$SUB_SVN_DIRS; $(SVN) status --no-ignore $(LLVM_SRC_ROOT) | svnup $(LLVM_SRC_ROOT) | xargs $(SVN) $(SVN-UPDATE-OPTIONS) update
-
-happiness: update all check-all
-
-.PHONY: srpm rpm update happiness
-
-# declare all targets at this level to be serial:
-
-.NOTPARALLEL:
-
-else # Building "Apple-style."
-# In an Apple-style build, once configuration is done, lines marked
-# "Apple-style" are removed with sed! Please don't remove these!
-# Look for the string "Apple-style" in utils/buildit/build_llvm.
-include $(shell find . -name GNUmakefile) # Building "Apple-style."
-endif # Building "Apple-style."
Deleted: trunk/contrib/llvm/Makefile.common
===================================================================
--- trunk/contrib/llvm/Makefile.common 2015-06-21 18:59:54 UTC (rev 7065)
+++ trunk/contrib/llvm/Makefile.common 2015-06-21 19:01:11 UTC (rev 7066)
@@ -1,69 +0,0 @@
-#===-- Makefile.common - Common make rules for LLVM --------*- Makefile -*--===#
-#
-# The LLVM Compiler Infrastructure
-#
-# This file is distributed under the University of Illinois Open Source
-# License. See LICENSE.TXT for details.
-#
-#===------------------------------------------------------------------------===#
-#
-# This file is included by all of the LLVM makefiles. This file defines common
-# rules to do things like compile a .cpp file or generate dependency info.
-# These are platform dependent, so this is the file used to specify these
-# system dependent operations.
-#
-# The following functionality can be set by setting incoming variables.
-# The variable $(LEVEL) *must* be set:
-#
-# 1. LEVEL - The level of the current subdirectory from the top of the
-# source directory. This level should be expressed as a path, for
-# example, ../.. for two levels deep.
-#
-# 2. DIRS - A list of subdirectories to be built. Fake targets are set up
-# so that each of the targets "all", "install", and "clean" each build
-# the subdirectories before the local target. DIRS are guaranteed to be
-# built in order.
-#
-# 3. PARALLEL_DIRS - A list of subdirectories to be built, but that may be
-# built in any order. All DIRS are built in order before PARALLEL_DIRS are
-# built, which are then built in any order.
-#
-# 4. SOURCES - If specified, this sets the source code filenames. If this
-# is not set, it defaults to be all of the .cpp, .c, .y, and .l files
-# in the current directory.
-#
-# 5. SourceDir - If specified, this specifies a directory that the source files
-# are in, if they are not in the current directory. This should include a
-# trailing / character.
-#
-# 6. LLVM_SRC_ROOT - If specified, points to the top of the LLVM source tree.
-#
-# 8. PROJ_SRC_DIR - The directory which contains the current set of Makefiles
-# and usually the source code too (unless SourceDir is set).
-#
-# 9. PROJ_SRC_ROOT - The root directory of the source code being compiled.
-#
-# 10. PROJ_OBJ_DIR - The directory where object code should be placed.
-#
-# 11. PROJ_OBJ_ROOT - The root directory for where object code should be
-# placed.
-#
-# For building,
-# LLVM, LLVM_SRC_ROOT = PROJ_SRC_ROOT
-#
-#===-----------------------------------------------------------------------====
-
-#
-# Configuration file to set paths specific to local installation of LLVM
-#
-ifndef LLVM_OBJ_ROOT
-include $(LEVEL)/Makefile.config
-else
-include $(LLVM_OBJ_ROOT)/Makefile.config
-endif
-
-#
-# Include all of the build rules used for making LLVM
-#
-include $(LLVM_SRC_ROOT)/Makefile.rules
-
Deleted: trunk/contrib/llvm/Makefile.config.in
===================================================================
--- trunk/contrib/llvm/Makefile.config.in 2015-06-21 18:59:54 UTC (rev 7065)
+++ trunk/contrib/llvm/Makefile.config.in 2015-06-21 19:01:11 UTC (rev 7066)
@@ -1,405 +0,0 @@
-#===-- Makefile.config - Local configuration for LLVM ------*- Makefile -*--===#
-#
-# The LLVM Compiler Infrastructure
-#
-# This file is distributed under the University of Illinois Open Source
-# License. See LICENSE.TXT for details.
-#
-#===------------------------------------------------------------------------===#
-#
-# This file is included by Makefile.common. It defines paths and other
-# values specific to a particular installation of LLVM.
-#
-#===------------------------------------------------------------------------===#
-
-# Define LLVM specific info and directories based on the autoconf variables
-LLVMPackageName := @PACKAGE_TARNAME@
-LLVMVersion := @PACKAGE_VERSION@
-LLVM_CONFIGTIME := @LLVM_CONFIGTIME@
-
-###########################################################################
-# Directory Configuration
-# This section of the Makefile determines what is where. To be
-# specific, there are several locations that need to be defined:
-#
-# o LLVM_SRC_ROOT : The root directory of the LLVM source code.
-# o LLVM_OBJ_ROOT : The root directory containing the built LLVM code.
-#
-# o PROJ_SRC_DIR : The directory containing the code to build.
-# o PROJ_SRC_ROOT : The root directory of the code to build.
-#
-# o PROJ_OBJ_DIR : The directory in which compiled code will be placed.
-# o PROJ_OBJ_ROOT : The root directory in which compiled code is placed.
-#
-###########################################################################
-
-PWD := @BINPWD@
-# Set the project name to LLVM if its not defined
-ifndef PROJECT_NAME
-PROJECT_NAME := $(LLVMPackageName)
-endif
-
-# The macro below is expanded when 'realpath' is not built-in.
-# Built-in 'realpath' is available on GNU Make 3.81.
-realpath = $(shell cd $(1); $(PWD))
-
-PROJ_OBJ_DIR := $(call realpath, .)
-PROJ_OBJ_ROOT := $(call realpath, $(PROJ_OBJ_DIR)/$(LEVEL))
-
-CLANG_SRC_ROOT := @CLANG_SRC_ROOT@
-
-ifeq ($(PROJECT_NAME),$(LLVMPackageName))
-LLVM_SRC_ROOT := $(call realpath, @abs_top_srcdir@)
-LLVM_OBJ_ROOT := $(call realpath, @abs_top_builddir@)
-PROJ_SRC_ROOT := $(LLVM_SRC_ROOT)
-PROJ_SRC_DIR := $(LLVM_SRC_ROOT)$(patsubst $(PROJ_OBJ_ROOT)%,%,$(PROJ_OBJ_DIR))
-
-ifneq ($(CLANG_SRC_ROOT),)
- CLANG_SRC_ROOT:= $(call realpath, $(CLANG_SRC_ROOT))
- PROJ_SRC_DIR := $(patsubst $(LLVM_SRC_ROOT)/tools/clang%,$(CLANG_SRC_ROOT)%,$(PROJ_SRC_DIR))
-endif
-
-prefix := @prefix@
-PROJ_prefix := $(prefix)
-program_prefix := @program_prefix@
-PROJ_VERSION := $(LLVMVersion)
-else
-ifndef PROJ_SRC_ROOT
-$(error Projects must define PROJ_SRC_ROOT)
-endif
-ifndef PROJ_OBJ_ROOT
-$(error Projects must define PROJ_OBJ_ROOT)
-endif
-ifndef PROJ_INSTALL_ROOT
-$(error Projects must define PROJ_INSTALL_ROOT)
-endif
-ifndef LLVM_SRC_ROOT
-$(error Projects must define LLVM_SRC_ROOT)
-endif
-ifndef LLVM_OBJ_ROOT
-$(error Projects must define LLVM_OBJ_ROOT)
-endif
-PROJ_SRC_DIR := $(call realpath, $(PROJ_SRC_ROOT)/$(patsubst $(PROJ_OBJ_ROOT)%,%,$(PROJ_OBJ_DIR)))
-prefix := $(PROJ_INSTALL_ROOT)
-PROJ_prefix := $(prefix)
-ifndef PROJ_VERSION
-PROJ_VERSION := 1.0
-endif
-endif
-
-INTERNAL_PREFIX := @INTERNAL_PREFIX@
-ifneq ($(INTERNAL_PREFIX),)
-PROJ_internal_prefix := $(INTERNAL_PREFIX)
-else
-PROJ_internal_prefix := $(prefix)
-endif
-
-PROJ_bindir := $(PROJ_prefix)/bin
-PROJ_libdir := $(PROJ_prefix)/lib
-PROJ_datadir := $(PROJ_prefix)/share
-PROJ_docsdir := $(PROJ_prefix)/docs/llvm
-PROJ_etcdir := $(PROJ_prefix)/etc/llvm
-PROJ_includedir := $(PROJ_prefix)/include
-PROJ_infodir := $(PROJ_prefix)/info
-PROJ_mandir := $(PROJ_prefix)/share/man
-
-# Determine if we're on a unix type operating system
-LLVM_ON_UNIX:=@LLVM_ON_UNIX@
-LLVM_ON_WIN32:=@LLVM_ON_WIN32@
-
-# Host operating system for which LLVM will be run.
-OS=@OS@
-HOST_OS=@HOST_OS@
-# Target operating system for which LLVM will compile for.
-TARGET_OS=@TARGET_OS@
-
-# Host hardware architecture
-HOST_ARCH=@HOST_ARCH@
-# Target hardware architecture
-ARCH=@ARCH@
-TARGET_NATIVE_ARCH := $(ARCH)
-
-# Indicates, whether we're cross-compiling LLVM or not
-LLVM_CROSS_COMPILING=@LLVM_CROSS_COMPILING@
-
-# Executable file extension for build platform (mainly for
-# tablegen call if we're cross-compiling).
-BUILD_EXEEXT=@BUILD_EXEEXT@
-
-# Compilers for the build platflorm (mainly for tablegen
-# call if we're cross-compiling).
-BUILD_CC=@BUILD_CC@
-BUILD_CXX=@BUILD_CXX@
-
-# Triple for configuring build tools when cross-compiling
-BUILD_TRIPLE=@build@
-
-# Target triple (cpu-vendor-os) which LLVM is compiled for
-HOST_TRIPLE=@host@
-
-# Target triple (cpu-vendor-os) for which we should generate code
-TARGET_TRIPLE=@target@
-
-# Extra options to compile LLVM with
-EXTRA_OPTIONS=@EXTRA_OPTIONS@
-
-# Extra options to link LLVM with
-EXTRA_LD_OPTIONS=@EXTRA_LD_OPTIONS@
-
-# Endian-ness of the target
-ENDIAN=@ENDIAN@
-
-# Path to the C++ compiler to use. This is an optional setting, which defaults
-# to whatever your gmake defaults to.
-CXX = @CXX@
-
-# Path to the CC binary, which use used by testcases for native builds.
-CC := @CC@
-
-# C/C++ preprocessor flags.
-CPPFLAGS += @CPPFLAGS@
-
-# C compiler flags.
-CFLAGS += @CFLAGS@
-
-# C++ compiler flags.
-CXXFLAGS += @CXXFLAGS@
-
-# Linker flags.
-LDFLAGS += @LDFLAGS@
-
-# Path to the library archiver program.
-AR_PATH = @AR@
-AR = @AR@
-
-# Path to the nm program
-NM_PATH = @NM@
-
-# The pathnames of the programs we require to build
-CMP := @CMP@
-CP := @CP@
-DATE := @DATE@
-FIND := @FIND@
-GREP := @GREP@
-INSTALL := @INSTALL@
-MKDIR := $(LLVM_SRC_ROOT)/autoconf/mkinstalldirs
-MV := @MV@
-RANLIB := @RANLIB@
-RM := @RM@
-SED := @SED@
-TAR := @TAR@
-PYTHON := @PYTHON@
-
-# Paths to miscellaneous programs we hope are present but might not be
-BZIP2 := @BZIP2@
-CAT := @CAT@
-DOT := @DOT@
-DOXYGEN := @DOXYGEN@
-GROFF := @GROFF@
-GZIPBIN := @GZIPBIN@
-OCAMLC := @OCAMLC@
-OCAMLOPT := @OCAMLOPT@
-OCAMLDEP := @OCAMLDEP@
-OCAMLDOC := @OCAMLDOC@
-GAS := @GAS@
-POD2HTML := @POD2HTML@
-POD2MAN := @POD2MAN@
-PDFROFF := @PDFROFF@
-ZIP := @ZIP@
-
-HAVE_PTHREAD := @HAVE_PTHREAD@
-
-LIBS := @LIBS@
-
-# Targets that we should build
-TARGETS_TO_BUILD=@TARGETS_TO_BUILD@
-
-# Path to directory where object files should be stored during a build.
-# Set OBJ_ROOT to "." if you do not want to use a separate place for
-# object files.
-OBJ_ROOT := .
-
-# What to pass as rpath flag to g++
-RPATH := @RPATH@
-
-# What to pass as -rdynamic flag to g++
-RDYNAMIC := @RDYNAMIC@
-
-# These are options that can either be enabled here, or can be enabled on the
-# make command line (ie, make ENABLE_PROFILING=1):
-
-# When ENABLE_LIBCPP is enabled, LLVM uses libc++ by default to build.
-#ENABLE_LIBCPP = 0
-ENABLE_LIBCPP = @ENABLE_LIBCPP@
-
-# When ENABLE_CXX11 is enabled, LLVM uses c++11 mode by default to build.
-ENABLE_CXX11 = @ENABLE_CXX11@
-
-# When ENABLE_CLANG_ARCMT is enabled, clang will have ARCMigrationTool.
-ENABLE_CLANG_ARCMT = @ENABLE_CLANG_ARCMT@
-
-# When ENABLE_CLANG_REWRITER is enabled, clang will have Rewriter.
-ENABLE_CLANG_REWRITER = @ENABLE_CLANG_REWRITER@
-
-# When ENABLE_CLANG_STATIC_ANALYZER is enabled, clang will have StaticAnalyzer.
-ENABLE_CLANG_STATIC_ANALYZER = @ENABLE_CLANG_STATIC_ANALYZER@
-
-# When ENABLE_WERROR is enabled, we'll pass -Werror on the command line
-ENABLE_WERROR = @ENABLE_WERROR@
-
-# When ENABLE_OPTIMIZED is enabled, LLVM code is optimized and output is put
-# into the "Release" directories. Otherwise, LLVM code is not optimized and
-# output is put in the "Debug" directories.
-#ENABLE_OPTIMIZED = 1
- at ENABLE_OPTIMIZED@
-
-# When ENABLE_PROFILING is enabled, profile instrumentation is done
-# and output is put into the "<Flavor>+Profile" directories, where
-# <Flavor> is either Debug or Release depending on how other build
-# flags are set. Otherwise, output is put in the <Flavor>
-# directories.
-#ENABLE_PROFILING = 1
- at ENABLE_PROFILING@
-
-# When DISABLE_ASSERTIONS is enabled, builds of all of the LLVM code will
-# exclude assertion checks, otherwise they are included.
-#DISABLE_ASSERTIONS = 1
- at DISABLE_ASSERTIONS@
-
-# When ENABLE_EXPENSIVE_CHECKS is enabled, builds of all of the LLVM
-# code will include expensive checks, otherwise they are excluded.
-#ENABLE_EXPENSIVE_CHECKS = 0
- at ENABLE_EXPENSIVE_CHECKS@
-
-# When DEBUG_RUNTIME is enabled, the runtime libraries will retain debug
-# symbols.
-#DEBUG_RUNTIME = 1
- at DEBUG_RUNTIME@
-
-# When DEBUG_SYMBOLS is enabled, the compiler libraries will retain debug
-# symbols.
-#DEBUG_SYMBOLS = 1
- at DEBUG_SYMBOLS@
-
-# When KEEP_SYMBOLS is enabled, installed executables will never have their
-# symbols stripped.
-#KEEP_SYMBOLS = 1
- at KEEP_SYMBOLS@
-
-# The compiler flags to use for optimized builds.
-OPTIMIZE_OPTION := @OPTIMIZE_OPTION@
-
-# When ENABLE_PROFILING is enabled, the llvm source base is built with profile
-# information to allow gprof to be used to get execution frequencies.
-#ENABLE_PROFILING = 1
-
-# When ENABLE_DOCS is disabled, docs/ will not be built.
-ENABLE_DOCS = @ENABLE_DOCS@
-
-# When ENABLE_DOXYGEN is enabled, the doxygen documentation will be built
-ENABLE_DOXYGEN = @ENABLE_DOXYGEN@
-
-# Do we want to enable threads?
-ENABLE_THREADS := @LLVM_ENABLE_THREADS@
-
-# Do we want to enable zlib?
-ENABLE_ZLIB := @LLVM_ENABLE_ZLIB@
-
-# Do we want to build with position independent code?
-ENABLE_PIC := @ENABLE_PIC@
-
-# Do we want to build a shared library and link the tools with it?
-ENABLE_SHARED := @ENABLE_SHARED@
-
-# Do we want to link the stdc++ into a shared library? (Cygming)
-ENABLE_EMBED_STDCXX := @ENABLE_EMBED_STDCXX@
-
-# Use -fvisibility-inlines-hidden?
-ENABLE_VISIBILITY_INLINES_HIDDEN := @ENABLE_VISIBILITY_INLINES_HIDDEN@
-
-# Do we want to allow timestamping information into builds?
-ENABLE_TIMESTAMPS := @ENABLE_TIMESTAMPS@
-
-# This option tells the Makefiles to produce verbose output.
-# It essentially prints the commands that make is executing
-#VERBOSE = 1
-
-# Enable JIT for this platform
-TARGET_HAS_JIT = @TARGET_HAS_JIT@
-
-# Environment variable to set to change the runtime shared library search path.
-SHLIBPATH_VAR = @SHLIBPATH_VAR@
-
-# Shared library extension for host platform.
-SHLIBEXT = @SHLIBEXT@
-
-# Executable file extension for host platform.
-EXEEXT = @EXEEXT@
-
-# Things we just assume are "there"
-ECHO := echo
-
-# Get the options for causing archives to link all their content instead of
-# just missing symbols, and the inverse of that. This is used for certain LLVM
-# tools that permit loadable modules. It ensures that the LLVM symbols will be
-# available to those loadable modules.
-LINKALL := @LINKALL@
-NOLINKALL := @NOLINKALL@
-
-# Get the value of HUGE_VAL_SANITY which will be either "yes" or "no" depending
-# on the check.
-HUGE_VAL_SANITY = @HUGE_VAL_SANITY@
-
-# Bindings that we should build
-BINDINGS_TO_BUILD := @BINDINGS_TO_BUILD@
-ALL_BINDINGS := @ALL_BINDINGS@
-OCAML_LIBDIR := @OCAML_LIBDIR@
-
-# When compiling under Mingw/Cygwin, executables such as tblgen
-# expect Windows paths, whereas the build system uses Unix paths.
-# The function SYSPATH transforms Unix paths into Windows paths.
-ifneq (,$(findstring -mno-cygwin, $(CXX)))
- SYSPATH = $(shell echo $(1) | cygpath -m -f -)
-else
- SYSPATH = $(1)
-endif
-
-# Location of the plugin header file for gold.
-BINUTILS_INCDIR := @BINUTILS_INCDIR@
-
-# Optional flags supported by the compiler
-# -Wno-missing-field-initializers
-NO_MISSING_FIELD_INITIALIZERS = @NO_MISSING_FIELD_INITIALIZERS@
-# -Wno-variadic-macros
-NO_VARIADIC_MACROS = @NO_VARIADIC_MACROS@
-# -Wcovered-switch-default
-COVERED_SWITCH_DEFAULT = @COVERED_SWITCH_DEFAULT@
-# -Wno-uninitialized
-NO_UNINITIALIZED = @NO_UNINITIALIZED@
-# -Wno-maybe-uninitialized
-NO_MAYBE_UNINITIALIZED = @NO_MAYBE_UNINITIALIZED@
-
-# Was polly found in tools/polly?
-LLVM_HAS_POLLY = @LLVM_HAS_POLLY@
-# Flags supported by the linker.
-# bfd ld / gold --version-script=file
-HAVE_LINK_VERSION_SCRIPT = @HAVE_LINK_VERSION_SCRIPT@
-
-# Flags to control using libxml2
-LIBXML2_LIBS := @LIBXML2_LIBS@
-LIBXML2_INC := @LIBXML2_INC@
-
-# Flags to control building support for Intel JIT Events API
-USE_INTEL_JITEVENTS := @USE_INTEL_JITEVENTS@
-INTEL_JITEVENTS_INCDIR := @INTEL_JITEVENTS_INCDIR@
-INTEL_JITEVENTS_LIBDIR := @INTEL_JITEVENTS_LIBDIR@
-
-# Flags to control building support for OProfile JIT API
-USE_OPROFILE := @USE_OPROFILE@
-
-ifeq ($(USE_INTEL_JITEVENTS), 1)
- OPTIONAL_COMPONENTS += IntelJITEvents
-endif
-ifeq ($(USE_OPROFILE), 1)
- OPTIONAL_COMPONENTS += OProfileJIT
-endif
Deleted: trunk/contrib/llvm/Makefile.rules
===================================================================
--- trunk/contrib/llvm/Makefile.rules 2015-06-21 18:59:54 UTC (rev 7065)
+++ trunk/contrib/llvm/Makefile.rules 2015-06-21 19:01:11 UTC (rev 7066)
@@ -1,2353 +0,0 @@
-#===-- Makefile.rules - Common make rules for LLVM ---------*- Makefile -*--===#
-#
-# The LLVM Compiler Infrastructure
-#
-# This file is distributed under the University of Illinois Open Source
-# License. See LICENSE.TXT for details.
-#
-#===------------------------------------------------------------------------===#
-#
-# This file is included by all of the LLVM makefiles. For details on how to use
-# it properly, please see the document MakefileGuide.html in the docs directory.
-#
-#===-----------------------------------------------------------------------====#
-
-################################################################################
-# TARGETS: Define standard targets that can be invoked
-################################################################################
-
-#--------------------------------------------------------------------
-# Define the various target sets
-#--------------------------------------------------------------------
-RecursiveTargets := all clean clean-all install uninstall install-bytecode \
- unitcheck
-LocalTargets := all-local clean-local clean-all-local check-local \
- install-local printvars uninstall-local \
- install-bytecode-local
-TopLevelTargets := check dist dist-check dist-clean dist-gzip dist-bzip2 \
- dist-zip unittests
-UserTargets := $(RecursiveTargets) $(LocalTargets) $(TopLevelTargets)
-InternalTargets := preconditions distdir dist-hook
-
-################################################################################
-# INITIALIZATION: Basic things the makefile needs
-################################################################################
-
-#--------------------------------------------------------------------
-# Set the VPATH so that we can find source files.
-#--------------------------------------------------------------------
-VPATH=$(PROJ_SRC_DIR)
-
-#--------------------------------------------------------------------
-# Reset the list of suffixes we know how to build.
-#--------------------------------------------------------------------
-.SUFFIXES:
-.SUFFIXES: .c .cpp .cc .h .hpp .o .a .bc .td .ps .dot .ll .m .mm
-.SUFFIXES: $(SHLIBEXT) $(SUFFIXES)
-
-#--------------------------------------------------------------------
-# Mark all of these targets as phony to avoid implicit rule search
-#--------------------------------------------------------------------
-.PHONY: $(UserTargets) $(InternalTargets)
-
-#--------------------------------------------------------------------
-# Make sure all the user-target rules are double colon rules and
-# they are defined first.
-#--------------------------------------------------------------------
-
-$(UserTargets)::
-
-#------------------------------------------------------------------------
-# LLVMBuild Integration
-#------------------------------------------------------------------------
-#
-# We use llvm-build to generate all the data required by the Makefile based
-# build system in one swoop:
-#
-# - We generate a file (a Makefile fragment) in the object root which contains
-# all the definitions that are required by Makefiles across the entire
-# project.
-#
-# - We generate the library table used by llvm-config.
-#
-# - We generate the dependencies for the Makefile fragment, so that we will
-# automatically reconfigure outselves.
-
-# The path to the llvm-build tool itself.
-LLVMBuildTool := $(PROJ_SRC_ROOT)/utils/llvm-build/llvm-build
-
-# The files we are going to generate using llvm-build.
-LLVMBuildMakeFrag := $(PROJ_OBJ_ROOT)/Makefile.llvmbuild
-LLVMConfigLibraryDependenciesInc := \
- $(PROJ_OBJ_ROOT)/tools/llvm-config/LibraryDependencies.inc
-
-# This is for temporary backwards compatibility.
-ifndef TARGET_NATIVE_ARCH
-TARGET_NATIVE_ARCH := $(ARCH)
-endif
-
-# The rule to create the LLVMBuild Makefile fragment as well as the llvm-config
-# library table.
-#
-# Note that this target gets its real dependencies generated for us by
-# llvm-build.
-#
-# We include a dependency on this Makefile to ensure that changes to the
-# generation command get picked up.
-$(LLVMBuildMakeFrag): $(PROJ_SRC_ROOT)/Makefile.rules \
- $(PROJ_OBJ_ROOT)/Makefile.config
- $(Echo) Constructing LLVMBuild project information.
- $(Verb)$(PYTHON) $(LLVMBuildTool) \
- --native-target "$(TARGET_NATIVE_ARCH)" \
- --enable-targets "$(TARGETS_TO_BUILD)" \
- --enable-optional-components "$(OPTIONAL_COMPONENTS)" \
- --write-library-table $(LLVMConfigLibraryDependenciesInc) \
- --write-make-fragment $(LLVMBuildMakeFrag)
-
-# For completeness, let Make know how the extra files are generated.
-$(LLVMConfigLibraryDependenciesInc): $(LLVMBuildMakeFrag)
-
-# Include the generated Makefile fragment.
-#
-# We currently only include the dependencies for the fragment itself if we are
-# at the top-level. Otherwise, recursive invocations would ends up doing
-# substantially more redundant stat'ing.
-#
-# This means that we won't properly regenerate things for developers used to
-# building from a subdirectory, but that is always somewhat unreliable.
-ifeq ($(LEVEL),.)
-LLVMBUILD_INCLUDE_DEPENDENCIES := 1
-
-# Clean the generated makefile fragment at the top-level.
-clean-local::
- -$(Verb) $(RM) -f $(LLVMBuildMakeFrag)
-endif
--include $(LLVMBuildMakeFrag)
-
-################################################################################
-# PRECONDITIONS: that which must be built/checked first
-################################################################################
-
-SrcMakefiles := $(filter %Makefile %Makefile.tests,\
- $(wildcard $(PROJ_SRC_DIR)/Makefile*))
-ObjMakefiles := $(subst $(PROJ_SRC_DIR),$(PROJ_OBJ_DIR),$(SrcMakefiles))
-ConfigureScript := $(PROJ_SRC_ROOT)/configure
-ConfigStatusScript := $(PROJ_OBJ_ROOT)/config.status
-MakefileConfigIn := $(strip $(wildcard $(PROJ_SRC_ROOT)/Makefile.config.in))
-MakefileCommonIn := $(strip $(wildcard $(PROJ_SRC_ROOT)/Makefile.common.in))
-MakefileConfig := $(PROJ_OBJ_ROOT)/Makefile.config
-MakefileCommon := $(PROJ_OBJ_ROOT)/Makefile.common
-PreConditions := $(ConfigStatusScript) $(ObjMakefiles)
-ifneq ($(MakefileCommonIn),)
-PreConditions += $(MakefileCommon)
-endif
-
-ifneq ($(MakefileConfigIn),)
-PreConditions += $(MakefileConfig)
-endif
-
-preconditions: $(PreConditions)
-
-#------------------------------------------------------------------------
-# Make sure the BUILT_SOURCES are built first
-#------------------------------------------------------------------------
-$(filter-out clean clean-local,$(UserTargets)):: $(BUILT_SOURCES)
-
-clean-all-local::
-ifneq ($(strip $(BUILT_SOURCES)),)
- -$(Verb) $(RM) -f $(BUILT_SOURCES)
-endif
-
-ifneq ($(PROJ_OBJ_ROOT),$(PROJ_SRC_ROOT))
-spotless:
- $(Verb) if test -x config.status ; then \
- $(EchoCmd) Wiping out $(PROJ_OBJ_ROOT) ; \
- $(MKDIR) .spotless.save ; \
- $(MV) config.status .spotless.save ; \
- $(MV) mklib .spotless.save ; \
- $(MV) projects .spotless.save ; \
- $(RM) -rf * ; \
- $(MV) .spotless.save/config.status . ; \
- $(MV) .spotless.save/mklib . ; \
- $(MV) .spotless.save/projects . ; \
- $(RM) -rf .spotless.save ; \
- $(EchoCmd) Rebuilding configuration of $(PROJ_OBJ_ROOT) ; \
- $(ConfigStatusScript) --recheck $(ConfigureScriptFLAGS) && \
- $(ConfigStatusScript) ; \
- else \
- $(EchoCmd) "make spotless" can only be run from $(PROJ_OBJ_ROOT); \
- fi
-else
-spotless:
- $(EchoCmd) "spotless target not supported for objdir == srcdir"
-endif
-
-$(BUILT_SOURCES) : $(ObjMakefiles)
-
-#------------------------------------------------------------------------
-# Make sure we're not using a stale configuration
-#------------------------------------------------------------------------
-reconfigure:
- $(Echo) Reconfiguring $(PROJ_OBJ_ROOT)
- $(Verb) cd $(PROJ_OBJ_ROOT) && \
- $(ConfigStatusScript) --recheck $(ConfigureScriptFLAGS) && \
- $(ConfigStatusScript)
-
-.PRECIOUS: $(ConfigStatusScript)
-$(ConfigStatusScript): $(ConfigureScript)
- $(Echo) Reconfiguring with $<
- $(Verb) cd $(PROJ_OBJ_ROOT) && \
- $(ConfigStatusScript) --recheck $(ConfigureScriptFLAGS) && \
- $(ConfigStatusScript)
-
-#------------------------------------------------------------------------
-# Make sure the configuration makefile is up to date
-#------------------------------------------------------------------------
-ifneq ($(MakefileConfigIn),)
-$(MakefileConfig): $(MakefileConfigIn) $(ConfigStatusScript)
- $(Echo) Regenerating $@
- $(Verb) cd $(PROJ_OBJ_ROOT) ; $(ConfigStatusScript) Makefile.config
-endif
-
-ifneq ($(MakefileCommonIn),)
-$(MakefileCommon): $(MakefileCommonIn) $(ConfigStatusScript)
- $(Echo) Regenerating $@
- $(Verb) cd $(PROJ_OBJ_ROOT) ; $(ConfigStatusScript) Makefile.common
-endif
-
-#------------------------------------------------------------------------
-# If the Makefile in the source tree has been updated, copy it over into the
-# build tree. But, only do this if the source and object makefiles differ
-#------------------------------------------------------------------------
-ifndef PROJ_MAKEFILE
-PROJ_MAKEFILE := $(PROJ_SRC_DIR)/Makefile
-endif
-
-ifneq ($(PROJ_OBJ_DIR),$(PROJ_SRC_DIR))
-
-Makefile: $(PROJ_MAKEFILE) $(ExtraMakefiles)
- $(Echo) "Updating Makefile"
- $(Verb) $(MKDIR) $(@D)
- $(Verb) $(CP) -f $< $@
-
-# Copy the Makefile.* files unless we're in the root directory which avoids
-# the copying of Makefile.config.in or other things that should be explicitly
-# taken care of.
-$(PROJ_OBJ_DIR)/Makefile% : $(PROJ_MAKEFILE)%
- @case '$?' in \
- *Makefile.rules) ;; \
- *.in) ;; \
- *) $(EchoCmd) "Updating $(@F)" ; \
- $(MKDIR) $(@D) ; \
- $(CP) -f $< $@ ;; \
- esac
-
-endif
-
-#------------------------------------------------------------------------
-# Set up the basic dependencies
-#------------------------------------------------------------------------
-$(UserTargets):: $(PreConditions)
-
-all:: all-local
-clean:: clean-local
-clean-all:: clean-local clean-all-local
-install:: install-local
-uninstall:: uninstall-local
-install-local:: all-local
-install-bytecode:: install-bytecode-local
-
-###############################################################################
-# VARIABLES: Set up various variables based on configuration data
-###############################################################################
-
-# Variable for if this make is for a "cleaning" target
-ifneq ($(strip $(filter clean clean-local dist-clean,$(MAKECMDGOALS))),)
- IS_CLEANING_TARGET=1
-endif
-
-#--------------------------------------------------------------------
-# Variables derived from configuration we are building
-#--------------------------------------------------------------------
-
-CPP.Defines :=
-ifeq ($(ENABLE_OPTIMIZED),1)
- BuildMode := Release
- # Don't use -fomit-frame-pointer on Darwin or FreeBSD.
- ifneq ($(HOST_OS),FreeBSD)
- ifneq ($(HOST_OS),Darwin)
- OmitFramePointer := -fomit-frame-pointer
- endif
- endif
-
- CXX.Flags += $(OPTIMIZE_OPTION) $(OmitFramePointer)
- C.Flags += $(OPTIMIZE_OPTION) $(OmitFramePointer)
- LD.Flags += $(OPTIMIZE_OPTION)
- ifdef DEBUG_SYMBOLS
- BuildMode := $(BuildMode)+Debug
- CXX.Flags += -g
- C.Flags += -g
- LD.Flags += -g
- KEEP_SYMBOLS := 1
- endif
-else
- ifdef NO_DEBUG_SYMBOLS
- BuildMode := Unoptimized
- CXX.Flags +=
- C.Flags +=
- LD.Flags +=
- KEEP_SYMBOLS := 1
- else
- BuildMode := Debug
- CXX.Flags += -g
- C.Flags += -g
- LD.Flags += -g
- KEEP_SYMBOLS := 1
- endif
-endif
-
-ifeq ($(ENABLE_LIBCPP),1)
- CXX.Flags += -stdlib=libc++
- LD.Flags += -stdlib=libc++
-endif
-
-ifeq ($(ENABLE_CXX11),1)
- CXX.Flags += -std=c++11
-endif
-
-ifeq ($(ENABLE_WERROR),1)
- CXX.Flags += -Werror
- C.Flags += -Werror
-endif
-
-ifeq ($(ENABLE_PROFILING),1)
- BuildMode := $(BuildMode)+Profile
- CXX.Flags := $(filter-out -fomit-frame-pointer,$(CXX.Flags)) -pg -g
- C.Flags := $(filter-out -fomit-frame-pointer,$(C.Flags)) -pg -g
- LD.Flags := $(filter-out -fomit-frame-pointer,$(LD.Flags)) -pg -g
- KEEP_SYMBOLS := 1
-endif
-
-ifeq ($(ENABLE_VISIBILITY_INLINES_HIDDEN),1)
- CXX.Flags += -fvisibility-inlines-hidden
-endif
-
-ifdef ENABLE_EXPENSIVE_CHECKS
- # GNU libstdc++ uses RTTI if you define _GLIBCXX_DEBUG, which we did above.
- # See http://gcc.gnu.org/bugzilla/show_bug.cgi?id=40160
- REQUIRES_RTTI := 1
-endif
-
-# IF REQUIRES_EH=1 is specified then don't disable exceptions
-ifndef REQUIRES_EH
- CXX.Flags += -fno-exceptions
-else
- # If the library requires EH, it also requires RTTI.
- REQUIRES_RTTI := 1
-endif
-
-ifdef REQUIRES_FRAME_POINTER
- CXX.Flags := $(filter-out -fomit-frame-pointer,$(CXX.Flags))
- C.Flags := $(filter-out -fomit-frame-pointer,$(C.Flags))
- LD.Flags := $(filter-out -fomit-frame-pointer,$(LD.Flags))
-endif
-
-# If REQUIRES_RTTI=1 is specified then don't disable run-time type id.
-ifneq ($(REQUIRES_RTTI), 1)
- CXX.Flags += -fno-rtti
-endif
-
-ifeq ($(ENABLE_COVERAGE),1)
- BuildMode := $(BuildMode)+Coverage
- CXX.Flags += -ftest-coverage -fprofile-arcs
- C.Flags += -ftest-coverage -fprofile-arcs
-endif
-
-# If DISABLE_ASSERTIONS=1 is specified (make command line or configured),
-# then disable assertions by defining the appropriate preprocessor symbols.
-ifeq ($(DISABLE_ASSERTIONS),1)
- CPP.Defines += -DNDEBUG
-else
- BuildMode := $(BuildMode)+Asserts
- CPP.Defines += -D_DEBUG
-endif
-
-# If ENABLE_EXPENSIVE_CHECKS=1 is specified (make command line or
-# configured), then enable expensive checks by defining the
-# appropriate preprocessor symbols.
-ifeq ($(ENABLE_EXPENSIVE_CHECKS),1)
- BuildMode := $(BuildMode)+Checks
- CPP.Defines += -D_GLIBCXX_DEBUG -DXDEBUG
-endif
-
-# LOADABLE_MODULE implies several other things so we force them to be
-# defined/on.
-ifdef LOADABLE_MODULE
- SHARED_LIBRARY := 1
- LINK_LIBS_IN_SHARED := 1
-endif
-
-ifdef SHARED_LIBRARY
- ENABLE_PIC := 1
- PIC_FLAG = "(PIC)"
-endif
-
-ifeq ($(ENABLE_PIC),1)
- ifeq ($(HOST_OS), $(filter $(HOST_OS), Cygwin MingW))
- # Nothing. Win32 defaults to PIC and warns when given -fPIC
- else
- ifeq ($(HOST_OS),Darwin)
- # Common symbols not allowed in dylib files
- CXX.Flags += -fno-common
- C.Flags += -fno-common
- else
- # Linux and others; pass -fPIC
- CXX.Flags += -fPIC
- C.Flags += -fPIC
- endif
- endif
-else
- ifeq ($(HOST_OS),Darwin)
- CXX.Flags += -mdynamic-no-pic
- C.Flags += -mdynamic-no-pic
- endif
-endif
-
-# Support makefile variable to disable any kind of timestamp/non-deterministic
-# info from being used in the build.
-ifeq ($(ENABLE_TIMESTAMPS),1)
- DOTDIR_TIMESTAMP_COMMAND := $(DATE)
-else
- DOTDIR_TIMESTAMP_COMMAND := echo 'Created.'
-endif
-
-ifeq ($(HOST_OS),MingW)
- # Work around PR4957
- CPP.Defines += -D__NO_CTYPE_INLINE
- ifeq ($(LLVM_CROSS_COMPILING),1)
- # Work around http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=525016
- ifdef TOOLNAME
- LD.Flags += -Wl,--allow-multiple-definition
- endif
- endif
-endif
-
-CXX.Flags += -Woverloaded-virtual
-CPP.BaseFlags += $(CPP.Defines)
-AR.Flags := cru
-
-# Make Floating point IEEE compliant on Alpha.
-ifeq ($(ARCH),Alpha)
- CXX.Flags += -mieee
- CPP.BaseFlags += -mieee
-ifeq ($(ENABLE_PIC),0)
- CXX.Flags += -fPIC
- CPP.BaseFlags += -fPIC
-endif
-
- LD.Flags += -Wl,--no-relax
-endif
-
-# GNU ld/PECOFF accepts but ignores them below;
-# --version-script
-# --export-dynamic
-# --rpath
-# FIXME: autoconf should be aware of them.
-ifneq (,$(filter $(HOST_OS),Cygwin MingW))
- HAVE_LINK_VERSION_SCRIPT := 0
- RPATH :=
- RDYNAMIC := -Wl,--export-all-symbols
-endif
-
-#--------------------------------------------------------------------
-# Directory locations
-#--------------------------------------------------------------------
-TargetMode :=
-ifeq ($(LLVM_CROSS_COMPILING),1)
- BuildLLVMToolDir := $(LLVM_OBJ_ROOT)/BuildTools/$(BuildMode)/bin
-endif
-
-ObjRootDir := $(PROJ_OBJ_DIR)/$(BuildMode)
-ObjDir := $(ObjRootDir)
-LibDir := $(PROJ_OBJ_ROOT)/$(BuildMode)/lib
-ToolDir := $(PROJ_OBJ_ROOT)/$(BuildMode)/bin
-ExmplDir := $(PROJ_OBJ_ROOT)/$(BuildMode)/examples
-LLVMLibDir := $(LLVM_OBJ_ROOT)/$(BuildMode)/lib
-LLVMToolDir := $(LLVM_OBJ_ROOT)/$(BuildMode)/bin
-LLVMExmplDir:= $(LLVM_OBJ_ROOT)/$(BuildMode)/examples
-
-#--------------------------------------------------------------------
-# Locations of shared libraries
-#--------------------------------------------------------------------
-
-SharedPrefix := lib
-SharedLibDir := $(LibDir)
-LLVMSharedLibDir := $(LLVMLibDir)
-
-# Win32.DLL prefers to be located on the "PATH" of binaries.
-ifeq ($(HOST_OS), $(filter $(HOST_OS), Cygwin MingW))
- SharedLibDir := $(ToolDir)
- LLVMSharedLibDir := $(LLVMToolDir)
-
- ifeq ($(HOST_OS),Cygwin)
- SharedPrefix := cyg
- else
- SharedPrefix :=
- endif
-endif
-
-#--------------------------------------------------------------------
-# LLVM Capable Compiler
-#--------------------------------------------------------------------
-
-ifneq ($(findstring llvm-gcc,$(LLVMCC_OPTION)),)
- LLVMCC := $(LLVMGCC)
- LLVMCXX := $(LLVMGXX)
-else
- ifneq ($(findstring clang,$(LLVMCC_OPTION)),)
- ifneq ($(CLANGPATH),)
- LLVMCC := $(CLANGPATH)
- LLVMCXX := $(CLANGXXPATH)
- else
- ifeq ($(ENABLE_BUILT_CLANG),1)
- LLVMCC := $(LLVMToolDir)/clang
- LLVMCXX := $(LLVMToolDir)/clang++
- endif
- endif
- endif
-endif
-
-#--------------------------------------------------------------------
-# Full Paths To Compiled Tools and Utilities
-#--------------------------------------------------------------------
-EchoCmd := $(ECHO) llvm[$(MAKELEVEL)]:
-ifdef BUILD_DIRS_ONLY
-EchoCmd := $(EchoCmd) "(build tools)":
-endif
-
-Echo := @$(EchoCmd)
-ifndef LLVMAS
-LLVMAS := $(LLVMToolDir)/llvm-as$(EXEEXT)
-endif
-ifndef LLVM_TBLGEN
- ifeq ($(LLVM_CROSS_COMPILING),1)
- LLVM_TBLGEN := $(BuildLLVMToolDir)/llvm-tblgen$(BUILD_EXEEXT)
- else
- LLVM_TBLGEN := $(LLVMToolDir)/llvm-tblgen$(EXEEXT)
- endif
-endif
-ifeq ($(LLVM_CROSS_COMPILING),1)
- LLVM_CONFIG := $(BuildLLVMToolDir)/llvm-config$(BUILD_EXEEXT)
-else
- LLVM_CONFIG := $(LLVMToolDir)/llvm-config$(EXEEXT)
-endif
-ifndef LLVMDIS
-LLVMDIS := $(LLVMToolDir)/llvm-dis$(EXEEXT)
-endif
-ifndef LLI
-LLI := $(LLVMToolDir)/lli$(EXEEXT)
-endif
-ifndef LLC
-LLC := $(LLVMToolDir)/llc$(EXEEXT)
-endif
-ifndef LOPT
-LOPT := $(LLVMToolDir)/opt$(EXEEXT)
-endif
-ifndef LBUGPOINT
-LBUGPOINT := $(LLVMToolDir)/bugpoint$(EXEEXT)
-endif
-ifndef LLVMLINK
-LLVMLINK := $(LLVMToolDir)/llvm-link$(EXEEXT)
-endif
-
-#--------------------------------------------------------------------
-# Adjust to user's request
-#--------------------------------------------------------------------
-
-ifeq ($(HOST_OS),Darwin)
- ifdef MACOSX_DEPLOYMENT_TARGET
- DARWIN_VERSION := $(MACOSX_DEPLOYMENT_TARGET)
- else
- DARWIN_VERSION := `sw_vers -productVersion`
- endif
- # Strip a number like 10.4.7 to 10.4
- DARWIN_VERSION := $(shell echo $(DARWIN_VERSION)| sed -E 's/(10.[0-9]).*/\1/')
- # Get "4" out of 10.4 for later pieces in the makefile.
- DARWIN_MAJVERS := $(shell echo $(DARWIN_VERSION)| sed -E 's/10.([0-9]).*/\1/')
-
- LoadableModuleOptions := -Wl,-flat_namespace -Wl,-undefined,suppress
- SharedLinkOptions := -dynamiclib
- ifdef DEPLOYMENT_TARGET
- SharedLinkOptions += $(DEPLOYMENT_TARGET)
- else
- ifneq ($(ARCH),ARM)
- SharedLinkOptions += -mmacosx-version-min=$(DARWIN_VERSION)
- endif
- endif
-else
- SharedLinkOptions=-shared
-endif
-
-ifeq ($(TARGET_OS),Darwin)
- ifdef DEPLOYMENT_TARGET
- TargetCommonOpts += $(DEPLOYMENT_TARGET)
- else
- ifneq ($(ARCH),ARM)
- TargetCommonOpts += -mmacosx-version-min=$(DARWIN_VERSION)
- endif
- endif
-endif
-
-ifdef SHARED_LIBRARY
-ifneq ($(HOST_OS), $(filter $(HOST_OS), Cygwin MingW))
-ifneq ($(HOST_OS),Darwin)
- LD.Flags += $(RPATH) -Wl,'$$ORIGIN'
-endif
-endif
-endif
-
-ifdef TOOL_VERBOSE
- C.Flags += -v
- CXX.Flags += -v
- LD.Flags += -v
- VERBOSE := 1
-endif
-
-# Adjust settings for verbose mode
-ifndef VERBOSE
- Verb := @
- AR.Flags += >/dev/null 2>/dev/null
- ConfigureScriptFLAGS += >$(PROJ_OBJ_DIR)/configure.out 2>&1
-else
- ConfigureScriptFLAGS :=
-endif
-
-# By default, strip symbol information from executable
-ifndef KEEP_SYMBOLS
- Strip := $(PLATFORMSTRIPOPTS)
- StripWarnMsg := "(without symbols)"
- Install.StripFlag += -s
-endif
-
-ifdef TOOL_NO_EXPORTS
- DynamicFlags :=
-else
- DynamicFlag := $(RDYNAMIC)
-endif
-
-# Adjust linker flags for building an executable
-ifneq ($(HOST_OS), $(filter $(HOST_OS), Cygwin MingW))
- ifneq ($(HOST_OS), Darwin)
- ifdef TOOLNAME
- LD.Flags += $(RPATH) -Wl,'$$ORIGIN/../lib'
- ifdef EXAMPLE_TOOL
- LD.Flags += $(RPATH) -Wl,$(ExmplDir) $(DynamicFlag)
- else
- LD.Flags += $(RPATH) -Wl,$(ToolDir) $(DynamicFlag)
- endif
- endif
-else
- ifneq ($(DARWIN_MAJVERS),4)
- LD.Flags += $(RPATH) -Wl, at executable_path/../lib
- endif
- ifeq ($(RC_XBS),YES)
- TempFile := $(shell mkdir -p ${OBJROOT}/dSYMs ; mktemp ${OBJROOT}/dSYMs/llvm-lto.XXXXXX)
- LD.Flags += -Wl,-object_path_lto -Wl,$(TempFile)
- endif
-endif
-endif
-
-
-#----------------------------------------------------------
-# Options To Invoke Tools
-#----------------------------------------------------------
-
-ifdef EXTRA_LD_OPTIONS
-LD.Flags += $(EXTRA_LD_OPTIONS)
-endif
-
-ifndef NO_PEDANTIC
-CompileCommonOpts += -pedantic -Wno-long-long
-endif
-CompileCommonOpts += -Wall -W -Wno-unused-parameter -Wwrite-strings \
- $(EXTRA_OPTIONS) $(COVERED_SWITCH_DEFAULT) \
- $(NO_UNINITIALIZED) $(NO_MAYBE_UNINITIALIZED) \
- $(NO_MISSING_FIELD_INITIALIZERS)
-# Enable cast-qual for C++; the workaround is to use const_cast.
-CXX.Flags += -Wcast-qual
-
-ifeq ($(HOST_OS),HP-UX)
- CompileCommonOpts := -D_REENTRANT -D_HPUX_SOURCE
-endif
-
-# If we are building a universal binary on Mac OS/X, pass extra options. This
-# is useful to people that want to link the LLVM libraries into their universal
-# apps.
-#
-# The following can be optionally specified:
-# UNIVERSAL_SDK_PATH variable can be specified as a path to the SDK to use.
-# For Mac OS/X 10.4 Intel machines, the traditional one is:
-# UNIVERSAL_SDK_PATH=/Developer/SDKs/MacOSX10.4u.sdk/
-# UNIVERSAL_ARCH can be optionally specified to be a list of architectures
-# to build for, e.g. UNIVERSAL_ARCH="i386 ppc ppc64". This defaults to
-# i386/ppc only.
-ifdef UNIVERSAL
- ifndef UNIVERSAL_ARCH
- UNIVERSAL_ARCH := i386 ppc
- endif
- UNIVERSAL_ARCH_OPTIONS := $(UNIVERSAL_ARCH:%=-arch %)
- CompileCommonOpts += $(UNIVERSAL_ARCH_OPTIONS)
- ifdef UNIVERSAL_SDK_PATH
- CompileCommonOpts += -isysroot $(UNIVERSAL_SDK_PATH)
- endif
-
- # Building universal cannot compute dependencies automatically.
- DISABLE_AUTO_DEPENDENCIES=1
-else
- ifeq ($(TARGET_OS),Darwin)
- ifeq ($(ARCH),x86_64)
- TargetCommonOpts = -m64
- else
- ifeq ($(ARCH),x86)
- TargetCommonOpts = -m32
- endif
- endif
- endif
-endif
-
-ifeq ($(HOST_OS),SunOS)
-CPP.BaseFlags += -include llvm/Support/Solaris.h
-endif
-
-ifeq ($(HOST_OS),AuroraUX)
-CPP.BaseFlags += -include llvm/Support/Solaris.h
-endif # !HOST_OS - AuroraUX.
-
-# On Windows, SharedLibDir != LibDir. The order is important.
-ifeq ($(HOST_OS), $(filter $(HOST_OS), Cygwin MingW))
- LD.Flags += -L$(SharedLibDir) -L$(LibDir) -L$(LLVMToolDir) -L$(LLVMLibDir)
-else
- LD.Flags += -L$(LibDir) -L$(LLVMLibDir)
-endif
-
-CPP.BaseFlags += -D_GNU_SOURCE -D__STDC_CONSTANT_MACROS -D__STDC_FORMAT_MACROS -D__STDC_LIMIT_MACROS
-# All -I flags should go here, so that they don't confuse llvm-config.
-CPP.Flags += $(sort -I$(PROJ_OBJ_DIR) -I$(PROJ_SRC_DIR) \
- $(patsubst %,-I%/include,\
- $(PROJ_OBJ_ROOT) $(PROJ_SRC_ROOT) \
- $(LLVM_OBJ_ROOT) $(LLVM_SRC_ROOT))) \
- $(CPP.BaseFlags)
-
-ifeq ($(INCLUDE_BUILD_DIR),1)
- CPP.Flags += -I$(ObjDir)
-endif
-
-# SHOW_DIAGNOSTICS support.
-ifeq ($(SHOW_DIAGNOSTICS),1)
- Compile.Wrapper := env CC_LOG_DIAGNOSTICS=1 \
- CC_LOG_DIAGNOSTICS_FILE="$(LLVM_OBJ_ROOT)/$(BuildMode)/diags"
-else
- Compile.Wrapper :=
-endif
-
-Compile.C = $(Compile.Wrapper) \
- $(CC) $(CPP.Flags) $(C.Flags) $(CFLAGS) $(CPPFLAGS) \
- $(TargetCommonOpts) $(CompileCommonOpts) -c
-Compile.CXX = $(Compile.Wrapper) \
- $(CXX) $(CPP.Flags) $(CXX.Flags) $(CXXFLAGS) $(CPPFLAGS) \
- $(TargetCommonOpts) $(CompileCommonOpts) -c
-Preprocess.CXX= $(Compile.Wrapper) \
- $(CXX) $(CPP.Flags) $(TargetCommonOpts) $(CPPFLAGS) \
- $(CompileCommonOpts) $(CXX.Flags) -E
-Link = $(Compile.Wrapper) \
- $(CXX) $(CPP.Flags) $(CXX.Flags) $(CXXFLAGS) $(LD.Flags) \
- $(LDFLAGS) $(TargetCommonOpts) $(CompileCommonOpts) $(Strip)
-
-BCCompile.C = $(LLVMCC) $(CPP.Flags) $(C.Flags) $(CFLAGS) $(CPPFLAGS) \
- $(TargetCommonOpts) $(CompileCommonOpts)
-Preprocess.C = $(CC) $(CPP.Flags) $(C.Flags) $(CPPFLAGS) \
- $(TargetCommonOpts) $(CompileCommonOpts) -E
-
-BCCompile.CXX = $(LLVMCXX) $(CPP.Flags) $(CXX.Flags) $(CXXFLAGS) $(CPPFLAGS) \
- $(TargetCommonOpts) $(CompileCommonOpts)
-
-ProgInstall = $(INSTALL) $(Install.StripFlag) -m 0755
-ScriptInstall = $(INSTALL) -m 0755
-DataInstall = $(INSTALL) -m 0644
-
-# When compiling under Mingw/Cygwin, the tblgen tool expects Windows
-# paths. In this case, the SYSPATH function (defined in
-# Makefile.config) transforms Unix paths into Windows paths.
-TableGen.Flags= -I $(call SYSPATH, $(PROJ_SRC_DIR)) \
- -I $(call SYSPATH, $(LLVM_SRC_ROOT)/include) \
- -I $(call SYSPATH, $(PROJ_SRC_ROOT)/include) \
- -I $(call SYSPATH, $(PROJ_SRC_ROOT)/lib/Target)
-LLVMTableGen = $(LLVM_TBLGEN) $(TableGen.Flags)
-
-Archive = $(AR) $(AR.Flags)
-LArchive = $(LLVMToolDir)/llvm-ar rcsf
-ifdef RANLIB
-Ranlib = $(RANLIB)
-else
-Ranlib = ranlib
-endif
-
-AliasTool = ln -s
-
-#----------------------------------------------------------
-# Get the list of source files and compute object file
-# names from them.
-#----------------------------------------------------------
-
-ifndef SOURCES
- Sources := $(notdir $(wildcard $(PROJ_SRC_DIR)/*.cpp \
- $(PROJ_SRC_DIR)/*.cc $(PROJ_SRC_DIR)/*.c))
-else
- Sources := $(SOURCES)
-endif
-
-ifdef BUILT_SOURCES
-Sources += $(filter %.cpp %.c %.cc,$(BUILT_SOURCES))
-endif
-
-BaseNameSources := $(sort $(basename $(Sources)))
-
-ObjectsO := $(BaseNameSources:%=$(ObjDir)/%.o)
-ObjectsBC := $(BaseNameSources:%=$(ObjDir)/%.bc)
-
-#----------------------------------------------------------
-# For Mingw MSYS bash and Python/w32:
-#
-# $(ECHOPATH) prints DOSish pathstring.
-# ex) $(ECHOPATH) /include/sys/types.h
-# --> C:/mingw/include/sys/types.h
-# built-in "echo" does not transform path to DOSish path.
-#
-# FIXME: It would not be needed when MSYS's python
-# were provided.
-#----------------------------------------------------------
-
-ifeq (-mingw32,$(findstring -mingw32,$(BUILD_TRIPLE)))
- ECHOPATH := $(Verb)$(PYTHON) -u -c "import sys;print ' '.join(sys.argv[1:])"
-else
- ECHOPATH := $(Verb)$(ECHO)
-endif
-
-###############################################################################
-# DIRECTORIES: Handle recursive descent of directory structure
-###############################################################################
-
-#---------------------------------------------------------
-# Provide rules to make install dirs. This must be early
-# in the file so they get built before dependencies
-#---------------------------------------------------------
-
-$(DESTDIR)$(PROJ_bindir) $(DESTDIR)$(PROJ_libdir) $(DESTDIR)$(PROJ_includedir) $(DESTDIR)$(PROJ_etcdir)::
- $(Verb) $(MKDIR) $@
-
-# To create other directories, as needed, and timestamp their creation
-%/.dir:
- $(Verb) $(MKDIR) $* > /dev/null
- $(Verb) $(DOTDIR_TIMESTAMP_COMMAND) > $@
-
-.PRECIOUS: $(ObjDir)/.dir $(LibDir)/.dir $(ToolDir)/.dir $(ExmplDir)/.dir
-.PRECIOUS: $(LLVMLibDir)/.dir $(LLVMToolDir)/.dir $(LLVMExmplDir)/.dir
-
-#---------------------------------------------------------
-# Handle the DIRS options for sequential construction
-#---------------------------------------------------------
-
-SubDirs :=
-ifdef DIRS
-SubDirs += $(DIRS)
-
-ifneq ($(PROJ_SRC_ROOT),$(PROJ_OBJ_ROOT))
-$(RecursiveTargets)::
- $(Verb) for dir in $(DIRS); do \
- if ([ ! -f $$dir/Makefile ] || \
- command test $$dir/Makefile -ot $(PROJ_SRC_DIR)/$$dir/Makefile ); then \
- $(MKDIR) $$dir; \
- $(CP) $(PROJ_SRC_DIR)/$$dir/Makefile $$dir/Makefile; \
- fi; \
- ($(MAKE) -C $$dir $@ ) || exit 1; \
- done
-else
-$(RecursiveTargets)::
- $(Verb) for dir in $(DIRS); do \
- ($(MAKE) -C $$dir $@ ) || exit 1; \
- done
-endif
-
-endif
-
-#---------------------------------------------------------
-# Handle the EXPERIMENTAL_DIRS options ensuring success
-# after each directory is built.
-#---------------------------------------------------------
-ifdef EXPERIMENTAL_DIRS
-$(RecursiveTargets)::
- $(Verb) for dir in $(EXPERIMENTAL_DIRS); do \
- if ([ ! -f $$dir/Makefile ] || \
- command test $$dir/Makefile -ot $(PROJ_SRC_DIR)/$$dir/Makefile ); then \
- $(MKDIR) $$dir; \
- $(CP) $(PROJ_SRC_DIR)/$$dir/Makefile $$dir/Makefile; \
- fi; \
- ($(MAKE) -C $$dir $@ ) || exit 0; \
- done
-endif
-
-#-----------------------------------------------------------
-# Handle the OPTIONAL_PARALLEL_DIRS options for optional parallel construction
-#-----------------------------------------------------------
-ifdef OPTIONAL_PARALLEL_DIRS
- PARALLEL_DIRS += $(foreach T,$(OPTIONAL_PARALLEL_DIRS),$(shell test -d $(PROJ_SRC_DIR)/$(T) -o -f $(T)/Makefile && echo "$(T)"))
-endif
-
-#-----------------------------------------------------------
-# Handle the PARALLEL_DIRS options for parallel construction
-#-----------------------------------------------------------
-ifdef PARALLEL_DIRS
-
-SubDirs += $(PARALLEL_DIRS)
-
-# Unfortunately, this list must be maintained if new recursive targets are added
-all :: $(addsuffix /.makeall ,$(PARALLEL_DIRS))
-clean :: $(addsuffix /.makeclean ,$(PARALLEL_DIRS))
-clean-all:: $(addsuffix /.makeclean-all,$(PARALLEL_DIRS))
-install :: $(addsuffix /.makeinstall ,$(PARALLEL_DIRS))
-uninstall:: $(addsuffix /.makeuninstall,$(PARALLEL_DIRS))
-install-bytecode :: $(addsuffix /.makeinstall-bytecode,$(PARALLEL_DIRS))
-unitcheck:: $(addsuffix /.makeunitcheck,$(PARALLEL_DIRS))
-
-ParallelTargets := $(foreach T,$(RecursiveTargets),%/.make$(T))
-
-$(ParallelTargets) :
- $(Verb) \
- SD=$(PROJ_SRC_DIR)/$(@D); \
- DD=$(@D); \
- if [ ! -f $$SD/Makefile ]; then \
- SD=$(@D); \
- DD=$(notdir $(@D)); \
- fi; \
- if ([ ! -f $$DD/Makefile ] || \
- command test $$DD/Makefile -ot \
- $$SD/Makefile ); then \
- $(MKDIR) $$DD; \
- $(CP) $$SD/Makefile $$DD/Makefile; \
- fi; \
- $(MAKE) -C $$DD $(subst $(@D)/.make,,$@)
-endif
-
-#---------------------------------------------------------
-# Handle the OPTIONAL_DIRS options for directores that may
-# or may not exist.
-#---------------------------------------------------------
-ifdef OPTIONAL_DIRS
-
-SubDirs += $(OPTIONAL_DIRS)
-
-ifneq ($(PROJ_SRC_ROOT),$(PROJ_OBJ_ROOT))
-$(RecursiveTargets)::
- $(Verb) for dir in $(OPTIONAL_DIRS); do \
- if [ -d $(PROJ_SRC_DIR)/$$dir ]; then\
- if ([ ! -f $$dir/Makefile ] || \
- command test $$dir/Makefile -ot $(PROJ_SRC_DIR)/$$dir/Makefile ); then \
- $(MKDIR) $$dir; \
- $(CP) $(PROJ_SRC_DIR)/$$dir/Makefile $$dir/Makefile; \
- fi; \
- ($(MAKE) -C$$dir $@ ) || exit 1; \
- fi \
- done
-else
-$(RecursiveTargets)::
- $(Verb) for dir in $(OPTIONAL_DIRS); do \
- if [ -d $(PROJ_SRC_DIR)/$$dir ]; then\
- ($(MAKE) -C$$dir $@ ) || exit 1; \
- fi \
- done
-endif
-endif
-
-#---------------------------------------------------------
-# Handle the CONFIG_FILES options
-#---------------------------------------------------------
-ifdef CONFIG_FILES
-
-ifdef NO_INSTALL
-install-local::
- $(Echo) Install circumvented with NO_INSTALL
-uninstall-local::
- $(Echo) UnInstall circumvented with NO_INSTALL
-else
-install-local:: $(DESTDIR)$(PROJ_etcdir) $(CONFIG_FILES)
- $(Echo) Installing Configuration Files To $(DESTDIR)$(PROJ_etcdir)
- $(Verb)for file in $(CONFIG_FILES); do \
- if test -f $(PROJ_OBJ_DIR)/$${file} ; then \
- $(DataInstall) $(PROJ_OBJ_DIR)/$${file} $(DESTDIR)$(PROJ_etcdir) ; \
- elif test -f $(PROJ_SRC_DIR)/$${file} ; then \
- $(DataInstall) $(PROJ_SRC_DIR)/$${file} $(DESTDIR)$(PROJ_etcdir) ; \
- else \
- $(ECHO) Error: cannot find config file $${file}. ; \
- fi \
- done
-
-uninstall-local::
- $(Echo) Uninstalling Configuration Files From $(DESTDIR)$(PROJ_etcdir)
- $(Verb)for file in $(CONFIG_FILES); do \
- $(RM) -f $(DESTDIR)$(PROJ_etcdir)/$${file} ; \
- done
-endif
-
-endif
-
-###############################################################################
-# Set up variables for building libraries
-###############################################################################
-
-#---------------------------------------------------------
-# Define various command line options pertaining to the
-# libraries needed when linking. There are "Proj" libs
-# (defined by the user's project) and "LLVM" libs (defined
-# by the LLVM project).
-#---------------------------------------------------------
-
-ifdef USEDLIBS
-ProjLibsOptions := $(patsubst %.a.o, -l%, $(addsuffix .o, $(USEDLIBS)))
-ProjLibsOptions := $(patsubst %.o, $(LibDir)/%.o, $(ProjLibsOptions))
-ProjUsedLibs := $(patsubst %.a.o, lib%.a, $(addsuffix .o, $(USEDLIBS)))
-ProjLibsPaths := $(addprefix $(LibDir)/,$(ProjUsedLibs))
-endif
-
-ifdef LLVMLIBS
-LLVMLibsOptions := $(patsubst %.a.o, -l%, $(addsuffix .o, $(LLVMLIBS)))
-LLVMLibsOptions := $(patsubst %.o, $(LLVMLibDir)/%.o, $(LLVMLibsOptions))
-LLVMUsedLibs := $(patsubst %.a.o, lib%.a, $(addsuffix .o, $(LLVMLIBS)))
-LLVMLibsPaths := $(addprefix $(LLVMLibDir)/,$(LLVMUsedLibs))
-endif
-
-# Loadable module for Win32 requires all symbols resolved for linking.
-# Then all symbols in LLVM.dll will be available.
-ifeq ($(ENABLE_SHARED),1)
- ifdef LOADABLE_MODULE
- ifneq (,$(filter $(HOST_OS),Cygwin MingW))
- LINK_COMPONENTS += all
- endif
- endif
-endif
-
-ifndef IS_CLEANING_TARGET
-ifdef LINK_COMPONENTS
-
-# If LLVM_CONFIG doesn't exist, build it. This can happen if you do a make
-# clean in tools, then do a make in tools (instead of at the top level).
-$(LLVM_CONFIG):
- @echo "*** llvm-config doesn't exist - rebuilding it."
- @$(MAKE) -C $(PROJ_OBJ_ROOT)/tools/llvm-config
-
-$(ToolDir)/$(strip $(TOOLNAME))$(EXEEXT): $(LLVM_CONFIG)
-
-ifeq ($(ENABLE_SHARED), 1)
-# We can take the "auto-import" feature to get rid of using dllimport.
-ifeq ($(HOST_OS), $(filter $(HOST_OS), Cygwin MingW))
-LLVMLibsOptions += -Wl,--enable-auto-import,--enable-runtime-pseudo-reloc \
- -L $(SharedLibDir)
-endif
-LLVMLibsOptions += -lLLVM-$(LLVMVersion)
-LLVMLibsPaths += $(SharedLibDir)/$(SharedPrefix)LLVM-$(LLVMVersion)$(SHLIBEXT)
-else
-
-ifndef NO_LLVM_CONFIG
-LLVMConfigLibs := $(shell $(LLVM_CONFIG) --libs $(LINK_COMPONENTS) || echo Error)
-ifeq ($(LLVMConfigLibs),Error)
-$(error llvm-config --libs failed)
-endif
-LLVMLibsOptions += $(LLVMConfigLibs)
-LLVMConfigLibfiles := $(shell $(LLVM_CONFIG) --libfiles $(LINK_COMPONENTS) || echo Error)
-ifeq ($(LLVMConfigLibfiles),Error)
-$(error llvm-config --libfiles failed)
-endif
-LLVMLibsPaths += $(LLVM_CONFIG) $(LLVMConfigLibfiles)
-endif
-
-endif
-endif
-endif
-
-# Set up the library exports file.
-ifdef EXPORTED_SYMBOL_FILE
-
-# First, set up the native export file, which may differ from the source
-# export file.
-
-ifeq ($(HOST_OS),Darwin)
-# Darwin convention prefixes symbols with underscores.
-NativeExportsFile := $(ObjDir)/$(notdir $(EXPORTED_SYMBOL_FILE)).sed
-$(NativeExportsFile): $(EXPORTED_SYMBOL_FILE) $(ObjDir)/.dir
- $(Verb) sed -e 's/^/_/' < $< > $@
-clean-local::
- -$(Verb) $(RM) -f $(NativeExportsFile)
-else
-ifeq ($(HAVE_LINK_VERSION_SCRIPT),1)
-# Gold and BFD ld require a version script rather than a plain list.
-NativeExportsFile := $(ObjDir)/$(notdir $(EXPORTED_SYMBOL_FILE)).map
-$(NativeExportsFile): $(EXPORTED_SYMBOL_FILE) $(ObjDir)/.dir
- $(Verb) echo "{" > $@
- $(Verb) grep -q '[[:alnum:]_]' $< && echo " global:" >> $@ || :
- $(Verb) sed -e 's/$$/;/' -e 's/^/ /' < $< >> $@
-ifneq ($(HOST_OS),OpenBSD)
- $(Verb) echo " local: *;" >> $@
-endif
- $(Verb) echo "};" >> $@
-clean-local::
- -$(Verb) $(RM) -f $(NativeExportsFile)
-else
-ifeq ($(HOST_OS), $(filter $(HOST_OS), Cygwin MingW))
-# GNU ld Win32 accepts .DEF files that contain "DATA" entries.
-NativeExportsFile := $(ObjDir)/$(notdir $(EXPORTED_SYMBOL_FILE:.exports=.def))
-$(NativeExportsFile): $(EXPORTED_SYMBOL_FILE) $(ObjDir)/.dir
- $(Echo) Generating $(notdir $@)
- $(Verb) $(ECHO) "EXPORTS" > $@
- $(Verb) $(CAT) $< >> $@
-clean-local::
- -$(Verb) $(RM) -f $(NativeExportsFile)
-else
-# Default behavior: just use the exports file verbatim.
-NativeExportsFile := $(EXPORTED_SYMBOL_FILE)
-endif
-endif
-endif
-
-# Now add the linker command-line options to use the native export file.
-
-# Darwin
-ifeq ($(HOST_OS),Darwin)
-LLVMLibsOptions += -Wl,-exported_symbols_list,$(NativeExportsFile)
-endif
-
-# gold, bfd ld, etc.
-ifeq ($(HAVE_LINK_VERSION_SCRIPT),1)
-LLVMLibsOptions += -Wl,--version-script,$(NativeExportsFile)
-endif
-
-# Windows
-ifeq ($(HOST_OS), $(filter $(HOST_OS), Cygwin MingW))
-# LLVMLibsOptions is invalidated at processing tools/llvm-shlib.
-SharedLinkOptions += $(NativeExportsFile)
-endif
-
-endif
-
-###############################################################################
-# Library Build Rules: Four ways to build a library
-###############################################################################
-
-#---------------------------------------------------------
-# Bytecode Module Targets:
-# If the user set MODULE_NAME then they want to build a
-# bytecode module from the sources. We compile all the
-# sources and link it together into a single bytecode
-# module.
-#---------------------------------------------------------
-
-ifdef MODULE_NAME
-ifeq ($(strip $(LLVMCC)),)
-$(warning Modules require LLVM capable compiler but none is available ****)
-else
-
-Module := $(LibDir)/$(MODULE_NAME).bc
-LinkModule := $(LLVMLINK)
-
-
-ifdef EXPORTED_SYMBOL_FILE
-LinkModule += -internalize-public-api-file=$(EXPORTED_SYMBOL_FILE)
-endif
-
-$(Module): $(BUILT_SOURCES) $(ObjectsBC) $(LibDir)/.dir $(LLVMLINK)
- $(Echo) Building $(BuildMode) Bytecode Module $(notdir $@)
- $(Verb) $(LinkModule) -o $@ $(ObjectsBC)
-
-all-local:: $(Module)
-
-clean-local::
-ifneq ($(strip $(Module)),)
- -$(Verb) $(RM) -f $(Module)
-endif
-
-ifdef BYTECODE_DESTINATION
-ModuleDestDir := $(BYTECODE_DESTINATION)
-else
-ModuleDestDir := $(DESTDIR)$(PROJ_libdir)
-endif
-
-ifdef NO_INSTALL
-install-local::
- $(Echo) Install circumvented with NO_INSTALL
-uninstall-local::
- $(Echo) Uninstall circumvented with NO_INSTALL
-else
-DestModule := $(ModuleDestDir)/$(MODULE_NAME).bc
-
-install-module:: $(DestModule)
-install-local:: $(DestModule)
-
-$(DestModule): $(ModuleDestDir) $(Module)
- $(Echo) Installing $(BuildMode) Bytecode Module $(DestModule)
- $(Verb) $(DataInstall) $(Module) $(DestModule)
-
-uninstall-local::
- $(Echo) Uninstalling $(BuildMode) Bytecode Module $(DestModule)
- -$(Verb) $(RM) -f $(DestModule)
-endif
-
-endif
-endif
-
-# if we're building a library ...
-ifdef LIBRARYNAME
-
-# Make sure there isn't any extraneous whitespace on the LIBRARYNAME option
-LIBRARYNAME := $(strip $(LIBRARYNAME))
-ifdef LOADABLE_MODULE
-BaseLibName.A := $(LIBRARYNAME).a
-BaseLibName.SO := $(LIBRARYNAME)$(SHLIBEXT)
-else
-BaseLibName.A := lib$(LIBRARYNAME).a
-BaseLibName.SO := $(SharedPrefix)$(LIBRARYNAME)$(SHLIBEXT)
-endif
-LibName.A := $(LibDir)/$(BaseLibName.A)
-LibName.SO := $(SharedLibDir)/$(BaseLibName.SO)
-LibName.O := $(LibDir)/$(LIBRARYNAME).o
-LibName.BCA:= $(LibDir)/lib$(LIBRARYNAME).bca
-
-#---------------------------------------------------------
-# Shared Library Targets:
-# If the user asked for a shared library to be built
-# with the SHARED_LIBRARY variable, then we provide
-# targets for building them.
-#---------------------------------------------------------
-ifdef SHARED_LIBRARY
-
-all-local:: $(LibName.SO)
-
-ifdef EXPORTED_SYMBOL_FILE
-$(LibName.SO): $(NativeExportsFile)
-endif
-
-ifdef LINK_LIBS_IN_SHARED
-ifdef LOADABLE_MODULE
-SharedLibKindMessage := "Loadable Module"
-SharedLinkOptions := $(LoadableModuleOptions) $(SharedLinkOptions)
-else
-SharedLibKindMessage := "Shared Library"
-endif
-$(LibName.SO): $(ObjectsO) $(ProjLibsPaths) $(LLVMLibsPaths) $(SharedLibDir)/.dir
- $(Echo) Linking $(BuildMode) $(SharedLibKindMessage) \
- $(notdir $@)
- $(Verb) $(Link) $(SharedLinkOptions) -o $@ $(ObjectsO) \
- $(ProjLibsOptions) $(LLVMLibsOptions) $(LIBS)
-else
-$(LibName.SO): $(ObjectsO) $(SharedLibDir)/.dir
- $(Echo) Linking $(BuildMode) Shared Library $(notdir $@)
- $(Verb) $(Link) $(SharedLinkOptions) -o $@ $(ObjectsO)
-endif
-
-clean-local::
-ifneq ($(strip $(LibName.SO)),)
- -$(Verb) $(RM) -f $(LibName.SO)
-endif
-
-ifdef NO_INSTALL
-install-local::
- $(Echo) Install circumvented with NO_INSTALL
-uninstall-local::
- $(Echo) Uninstall circumvented with NO_INSTALL
-else
-
-# Win32.DLL prefers to be located on the "PATH" of binaries.
-ifeq ($(HOST_OS), $(filter $(HOST_OS), Cygwin MingW))
-DestSharedLibDir := $(DESTDIR)$(PROJ_bindir)
-else
-DestSharedLibDir := $(DESTDIR)$(PROJ_libdir)
-endif
-DestSharedLib := $(DestSharedLibDir)/$(BaseLibName.SO)
-
-install-local:: $(DestSharedLib)
-
-$(DestSharedLib): $(LibName.SO) $(DestSharedLibDir)
- $(Echo) Installing $(BuildMode) Shared Library $(DestSharedLib)
- $(Verb) $(INSTALL) $(LibName.SO) $(DestSharedLib)
-
-uninstall-local::
- $(Echo) Uninstalling $(BuildMode) Shared Library $(DestSharedLib)
- -$(Verb) $(RM) -f $(DestSharedLibDir)/$(SharedPrefix)$(LIBRARYNAME).*
-endif
-endif
-
-#---------------------------------------------------------
-# Bytecode Library Targets:
-# If the user asked for a bytecode library to be built
-# with the BYTECODE_LIBRARY variable, then we provide
-# targets for building them.
-#---------------------------------------------------------
-ifdef BYTECODE_LIBRARY
-ifeq ($(strip $(LLVMCC)),)
-$(warning Bytecode libraries require LLVM capable compiler but none is available ****)
-else
-
-all-local:: $(LibName.BCA)
-
-ifdef EXPORTED_SYMBOL_FILE
-BCLinkLib = $(LLVMLINK) -internalize-public-api-file=$(EXPORTED_SYMBOL_FILE)
-
-$(LibName.BCA): $(ObjectsBC) $(LibDir)/.dir $(LLVMLINK) \
- $(LLVMToolDir)/llvm-ar
- $(Echo) Building $(BuildMode) Bytecode Archive $(notdir $@) \
- "(internalize)"
- $(Verb) $(BCLinkLib) -o $(ObjDir)/$(LIBRARYNAME).internalize $(ObjectsBC)
- $(Verb) $(RM) -f $@
- $(Verb) $(LArchive) $@ $(ObjDir)/$(LIBRARYNAME).internalize.bc
-else
-$(LibName.BCA): $(ObjectsBC) $(LibDir)/.dir \
- $(LLVMToolDir)/llvm-ar
- $(Echo) Building $(BuildMode) Bytecode Archive $(notdir $@)
- $(Verb) $(RM) -f $@
- $(Verb) $(LArchive) $@ $(ObjectsBC)
-
-endif
-
-clean-local::
-ifneq ($(strip $(LibName.BCA)),)
- -$(Verb) $(RM) -f $(LibName.BCA)
-endif
-
-ifdef BYTECODE_DESTINATION
-BytecodeDestDir := $(BYTECODE_DESTINATION)
-else
-BytecodeDestDir := $(DESTDIR)$(PROJ_libdir)
-endif
-
-DestBytecodeLib = $(BytecodeDestDir)/lib$(LIBRARYNAME).bca
-
-install-bytecode-local:: $(DestBytecodeLib)
-
-ifdef NO_INSTALL
-install-local::
- $(Echo) Install circumvented with NO_INSTALL
-uninstall-local::
- $(Echo) Uninstall circumvented with NO_INSTALL
-else
-install-local:: $(DestBytecodeLib)
-
-$(DestBytecodeLib): $(LibName.BCA) $(BytecodeDestDir)
- $(Echo) Installing $(BuildMode) Bytecode Archive $(DestBytecodeLib)
- $(Verb) $(DataInstall) $(LibName.BCA) $(DestBytecodeLib)
-
-uninstall-local::
- $(Echo) Uninstalling $(BuildMode) Bytecode Archive $(DestBytecodeLib)
- -$(Verb) $(RM) -f $(DestBytecodeLib)
-endif
-endif
-endif
-
-#---------------------------------------------------------
-# Library Targets:
-# If neither BUILD_ARCHIVE or LOADABLE_MODULE are specified, default to
-# building an archive.
-#---------------------------------------------------------
-ifndef NO_BUILD_ARCHIVE
-ifndef BUILD_ARCHIVE
-ifndef LOADABLE_MODULE
-BUILD_ARCHIVE = 1
-endif
-endif
-endif
-
-#---------------------------------------------------------
-# Archive Library Targets:
-# If the user wanted a regular archive library built,
-# then we provide targets for building them.
-#---------------------------------------------------------
-ifdef BUILD_ARCHIVE
-
-all-local:: $(LibName.A)
-
-$(LibName.A): $(ObjectsO) $(LibDir)/.dir
- $(Echo) Building $(BuildMode) Archive Library $(notdir $@)
- -$(Verb) $(RM) -f $@
- $(Verb) $(Archive) $@ $(ObjectsO)
- $(Verb) $(Ranlib) $@
-
-clean-local::
-ifneq ($(strip $(LibName.A)),)
- -$(Verb) $(RM) -f $(LibName.A)
-endif
-
-ifdef NO_INSTALL
-install-local::
- $(Echo) Install circumvented with NO_INSTALL
-uninstall-local::
- $(Echo) Uninstall circumvented with NO_INSTALL
-else
-ifdef NO_INSTALL_ARCHIVES
-install-local::
- $(Echo) Install circumvented with NO_INSTALL
-uninstall-local::
- $(Echo) Uninstall circumvented with NO_INSTALL
-else
-DestArchiveLib := $(DESTDIR)$(PROJ_libdir)/lib$(LIBRARYNAME).a
-
-install-local:: $(DestArchiveLib)
-
-$(DestArchiveLib): $(LibName.A) $(DESTDIR)$(PROJ_libdir)
- $(Echo) Installing $(BuildMode) Archive Library $(DestArchiveLib)
- $(Verb) $(MKDIR) $(DESTDIR)$(PROJ_libdir)
- $(Verb) $(INSTALL) $(LibName.A) $(DestArchiveLib)
-
-uninstall-local::
- $(Echo) Uninstalling $(BuildMode) Archive Library $(DestArchiveLib)
- -$(Verb) $(RM) -f $(DestArchiveLib)
-endif
-endif
-endif
-
-# endif LIBRARYNAME
-endif
-
-###############################################################################
-# Tool Build Rules: Build executable tool based on TOOLNAME option
-###############################################################################
-
-ifdef TOOLNAME
-
-#---------------------------------------------------------
-# Set up variables for building a tool.
-#---------------------------------------------------------
-TOOLEXENAME := $(strip $(TOOLNAME))$(EXEEXT)
-ifdef EXAMPLE_TOOL
-ToolBuildPath := $(ExmplDir)/$(TOOLEXENAME)
-else
-ToolBuildPath := $(ToolDir)/$(TOOLEXENAME)
-endif
-
-# TOOLALIAS is a name to symlink (or copy) the tool to.
-ifdef TOOLALIAS
-ifdef EXAMPLE_TOOL
-ToolAliasBuildPath := $(ExmplDir)/$(strip $(TOOLALIAS))$(EXEEXT)
-else
-ToolAliasBuildPath := $(ToolDir)/$(strip $(TOOLALIAS))$(EXEEXT)
-endif
-endif
-
-#---------------------------------------------------------
-# Prune Exports
-#---------------------------------------------------------
-
-# If the tool opts in with TOOL_NO_EXPORTS, optimize startup time of the app by
-# not exporting all of the weak symbols from the binary. This reduces dyld
-# startup time by 4x on darwin in some cases.
-ifdef TOOL_NO_EXPORTS
-ifeq ($(HOST_OS),Darwin)
-
-# Tiger tools don't support this.
-ifneq ($(DARWIN_MAJVERS),4)
-LD.Flags += -Wl,-exported_symbol,_main
-endif
-endif
-
-ifeq ($(HOST_OS), $(filter $(HOST_OS), Linux NetBSD FreeBSD GNU))
-ifneq ($(ARCH), Mips)
- LD.Flags += -Wl,--version-script=$(LLVM_SRC_ROOT)/autoconf/ExportMap.map
-endif
-endif
-endif
-
-#---------------------------------------------------------
-# Tool Order File Support
-#---------------------------------------------------------
-
-ifeq ($(HOST_OS),Darwin)
-ifdef TOOL_ORDER_FILE
-
-LD.Flags += -Wl,-order_file,$(TOOL_ORDER_FILE)
-
-endif
-endif
-
-#---------------------------------------------------------
-# Tool Version Info Support
-#---------------------------------------------------------
-
-ifeq ($(HOST_OS),Darwin)
-ifdef TOOL_INFO_PLIST
-
-LD.Flags += -Wl,-sectcreate,__TEXT,__info_plist,$(ObjDir)/$(TOOL_INFO_PLIST)
-
-$(ToolBuildPath): $(ObjDir)/$(TOOL_INFO_PLIST)
-
-$(ObjDir)/$(TOOL_INFO_PLIST): $(PROJ_SRC_DIR)/$(TOOL_INFO_PLIST).in $(ObjDir)/.dir
- $(Echo) "Creating $(TOOLNAME) '$(TOOL_INFO_PLIST)' file..."
- $(Verb)sed -e "s#@TOOL_INFO_UTI@#$(TOOL_INFO_UTI)#g" \
- -e "s#@TOOL_INFO_NAME@#$(TOOL_INFO_NAME)#g" \
- -e "s#@TOOL_INFO_VERSION@#$(TOOL_INFO_VERSION)#g" \
- -e "s#@TOOL_INFO_BUILD_VERSION@#$(TOOL_INFO_BUILD_VERSION)#g" \
- $< > $@
-
-endif
-endif
-
-#---------------------------------------------------------
-# Provide targets for building the tools
-#---------------------------------------------------------
-all-local:: $(ToolBuildPath) $(ToolAliasBuildPath)
-
-clean-local::
-ifneq ($(strip $(ToolBuildPath)),)
- -$(Verb) $(RM) -f $(ToolBuildPath)
-endif
-ifneq ($(strip $(ToolAliasBuildPath)),)
- -$(Verb) $(RM) -f $(ToolAliasBuildPath)
-endif
-
-ifdef EXAMPLE_TOOL
-$(ToolBuildPath): $(ExmplDir)/.dir
-else
-$(ToolBuildPath): $(ToolDir)/.dir
-endif
-
-ifdef CODESIGN_TOOLS
-TOOL_CODESIGN_IDENTITY ?= -
-
-$(ToolBuildPath): $(ObjectsO) $(ProjLibsPaths) $(LLVMLibsPaths)
- $(Echo) Linking $(BuildMode) executable $(TOOLNAME) $(StripWarnMsg)
- $(Verb) $(Link) -o $@ $(TOOLLINKOPTS) $(ObjectsO) $(ProjLibsOptions) \
- $(LLVMLibsOptions) $(ExtraLibs) $(TOOLLINKOPTSB) $(LIBS)
- $(Echo) ======= Finished Linking $(BuildMode) Executable $(TOOLNAME) \
- $(StripWarnMsg)
- $(Echo) ======= Code-Signing $(BuildMode) Executable $(TOOLNAME)
- $(Verb) codesign -s $(TOOL_CODESIGN_IDENTITY) $@
-else
-$(ToolBuildPath): $(ObjectsO) $(ProjLibsPaths) $(LLVMLibsPaths)
- $(Echo) Linking $(BuildMode) executable $(TOOLNAME) $(StripWarnMsg)
- $(Verb) $(Link) -o $@ $(TOOLLINKOPTS) $(ObjectsO) $(ProjLibsOptions) \
- $(LLVMLibsOptions) $(ExtraLibs) $(TOOLLINKOPTSB) $(LIBS)
- $(Echo) ======= Finished Linking $(BuildMode) Executable $(TOOLNAME) \
- $(StripWarnMsg)
-endif
-
-ifneq ($(strip $(ToolAliasBuildPath)),)
-$(ToolAliasBuildPath): $(ToolBuildPath)
- $(Echo) Creating $(BuildMode) Alias $(TOOLALIAS) $(StripWarnMsg)
- $(Verb) $(RM) -f $(ToolAliasBuildPath)
- $(Verb) $(AliasTool) $(notdir $(ToolBuildPath)) $(ToolAliasBuildPath)
- $(Echo) ======= Finished Creating $(BuildMode) Alias $(TOOLALIAS) \
- $(StripWarnMsg)
-endif
-
-ifdef NO_INSTALL
-install-local::
- $(Echo) Install circumvented with NO_INSTALL
-uninstall-local::
- $(Echo) Uninstall circumvented with NO_INSTALL
-else
-
-ifdef INTERNAL_TOOL
-ToolBinDir = $(DESTDIR)$(PROJ_internal_prefix)/bin
-else
-ToolBinDir = $(DESTDIR)$(PROJ_bindir)
-endif
-DestTool = $(ToolBinDir)/$(program_prefix)$(TOOLEXENAME)
-
-install-local:: $(DestTool)
-
-$(DestTool): $(ToolBuildPath)
- $(Echo) Installing $(BuildMode) $(DestTool)
- $(Verb) $(MKDIR) $(ToolBinDir)
- $(Verb) $(ProgInstall) $(ToolBuildPath) $(DestTool)
-
-uninstall-local::
- $(Echo) Uninstalling $(BuildMode) $(DestTool)
- -$(Verb) $(RM) -f $(DestTool)
-
-# TOOLALIAS install.
-ifdef TOOLALIAS
-DestToolAlias = $(ToolBinDir)/$(program_prefix)$(TOOLALIAS)$(EXEEXT)
-
-install-local:: $(DestToolAlias)
-
-$(DestToolAlias): $(DestTool)
- $(Echo) Installing $(BuildMode) $(DestToolAlias)
- $(Verb) $(RM) -f $(DestToolAlias)
- $(Verb) $(AliasTool) $(notdir $(DestTool)) $(DestToolAlias)
-
-uninstall-local::
- $(Echo) Uninstalling $(BuildMode) $(DestToolAlias)
- -$(Verb) $(RM) -f $(DestToolAlias)
-endif
-
-endif
-endif
-
-###############################################################################
-# Object Build Rules: Build object files based on sources
-###############################################################################
-
-# FIXME: This should be checking for "if not GCC or ICC", not for "if HP-UX"
-ifeq ($(HOST_OS),HP-UX)
- DISABLE_AUTO_DEPENDENCIES=1
-endif
-
-# Provide rule sets for when dependency generation is enabled
-ifndef DISABLE_AUTO_DEPENDENCIES
-
-#---------------------------------------------------------
-# Create .o files in the ObjDir directory from the .cpp and .c files...
-#---------------------------------------------------------
-
-DEPEND_OPTIONS = -MMD -MP -MF "$(ObjDir)/$*.d.tmp" \
- -MT "$(ObjDir)/$*.o" -MT "$(ObjDir)/$*.d"
-
-# If the build succeeded, move the dependency file over, otherwise
-# remove it.
-DEPEND_MOVEFILE = then $(MV) -f "$(ObjDir)/$*.d.tmp" "$(ObjDir)/$*.d"; \
- else $(RM) "$(ObjDir)/$*.d.tmp"; exit 1; fi
-
-$(ObjDir)/%.o: %.cpp $(ObjDir)/.dir $(BUILT_SOURCES) $(PROJ_MAKEFILE)
- $(Echo) "Compiling $*.cpp for $(BuildMode) build" $(PIC_FLAG)
- $(Verb) if $(Compile.CXX) $(DEPEND_OPTIONS) $< -o $(ObjDir)/$*.o ; \
- $(DEPEND_MOVEFILE)
-
-$(ObjDir)/%.o: %.mm $(ObjDir)/.dir $(BUILT_SOURCES) $(PROJ_MAKEFILE)
- $(Echo) "Compiling $*.mm for $(BuildMode) build" $(PIC_FLAG)
- $(Verb) if $(Compile.CXX) $(DEPEND_OPTIONS) $< -o $(ObjDir)/$*.o ; \
- $(DEPEND_MOVEFILE)
-
-$(ObjDir)/%.o: %.cc $(ObjDir)/.dir $(BUILT_SOURCES) $(PROJ_MAKEFILE)
- $(Echo) "Compiling $*.cc for $(BuildMode) build" $(PIC_FLAG)
- $(Verb) if $(Compile.CXX) $(DEPEND_OPTIONS) $< -o $(ObjDir)/$*.o ; \
- $(DEPEND_MOVEFILE)
-
-$(ObjDir)/%.o: %.c $(ObjDir)/.dir $(BUILT_SOURCES) $(PROJ_MAKEFILE)
- $(Echo) "Compiling $*.c for $(BuildMode) build" $(PIC_FLAG)
- $(Verb) if $(Compile.C) $(DEPEND_OPTIONS) $< -o $(ObjDir)/$*.o ; \
- $(DEPEND_MOVEFILE)
-
-$(ObjDir)/%.o: %.m $(ObjDir)/.dir $(BUILT_SOURCES) $(PROJ_MAKEFILE)
- $(Echo) "Compiling $*.m for $(BuildMode) build" $(PIC_FLAG)
- $(Verb) if $(Compile.C) $(DEPEND_OPTIONS) $< -o $(ObjDir)/$*.o ; \
- $(DEPEND_MOVEFILE)
-
-#---------------------------------------------------------
-# Create .bc files in the ObjDir directory from .cpp .cc and .c files...
-#---------------------------------------------------------
-
-BC_DEPEND_OPTIONS = -MMD -MP -MF "$(ObjDir)/$*.bc.d.tmp" \
- -MT "$(ObjDir)/$*.ll" -MT "$(ObjDir)/$*.bc.d"
-
-# If the build succeeded, move the dependency file over, otherwise
-# remove it.
-BC_DEPEND_MOVEFILE = then $(MV) -f "$(ObjDir)/$*.bc.d.tmp" "$(ObjDir)/$*.bc.d"; \
- else $(RM) "$(ObjDir)/$*.bc.d.tmp"; exit 1; fi
-
-$(ObjDir)/%.ll: %.cpp $(ObjDir)/.dir $(BUILT_SOURCES) $(LLVMCXX)
- $(Echo) "Compiling $*.cpp for $(BuildMode) build (bytecode)"
- $(Verb) if $(BCCompile.CXX) $(BC_DEPEND_OPTIONS) \
- $< -o $(ObjDir)/$*.ll -S $(LLVMCC_EMITIR_FLAG) ; \
- $(BC_DEPEND_MOVEFILE)
-
-$(ObjDir)/%.ll: %.mm $(ObjDir)/.dir $(BUILT_SOURCES) $(LLVMCXX)
- $(Echo) "Compiling $*.mm for $(BuildMode) build (bytecode)"
- $(Verb) if $(BCCompile.CXX) $(BC_DEPEND_OPTIONS) \
- $< -o $(ObjDir)/$*.ll -S $(LLVMCC_EMITIR_FLAG) ; \
- $(BC_DEPEND_MOVEFILE)
-
-$(ObjDir)/%.ll: %.cc $(ObjDir)/.dir $(BUILT_SOURCES) $(LLVMCXX)
- $(Echo) "Compiling $*.cc for $(BuildMode) build (bytecode)"
- $(Verb) if $(BCCompile.CXX) $(BC_DEPEND_OPTIONS) \
- $< -o $(ObjDir)/$*.ll -S $(LLVMCC_EMITIR_FLAG) ; \
- $(BC_DEPEND_MOVEFILE)
-
-$(ObjDir)/%.ll: %.c $(ObjDir)/.dir $(BUILT_SOURCES) $(LLVMCC)
- $(Echo) "Compiling $*.c for $(BuildMode) build (bytecode)"
- $(Verb) if $(BCCompile.C) $(BC_DEPEND_OPTIONS) \
- $< -o $(ObjDir)/$*.ll -S $(LLVMCC_EMITIR_FLAG) ; \
- $(BC_DEPEND_MOVEFILE)
-
-$(ObjDir)/%.ll: %.m $(ObjDir)/.dir $(BUILT_SOURCES) $(LLVMCC)
- $(Echo) "Compiling $*.m for $(BuildMode) build (bytecode)"
- $(Verb) if $(BCCompile.C) $(BC_DEPEND_OPTIONS) \
- $< -o $(ObjDir)/$*.ll -S $(LLVMCC_EMITIR_FLAG) ; \
- $(BC_DEPEND_MOVEFILE)
-
-# Provide alternate rule sets if dependencies are disabled
-else
-
-$(ObjDir)/%.o: %.cpp $(ObjDir)/.dir $(BUILT_SOURCES)
- $(Echo) "Compiling $*.cpp for $(BuildMode) build" $(PIC_FLAG)
- $(Compile.CXX) $< -o $@
-
-$(ObjDir)/%.o: %.mm $(ObjDir)/.dir $(BUILT_SOURCES)
- $(Echo) "Compiling $*.mm for $(BuildMode) build" $(PIC_FLAG)
- $(Compile.CXX) $< -o $@
-
-$(ObjDir)/%.o: %.cc $(ObjDir)/.dir $(BUILT_SOURCES)
- $(Echo) "Compiling $*.cc for $(BuildMode) build" $(PIC_FLAG)
- $(Compile.CXX) $< -o $@
-
-$(ObjDir)/%.o: %.c $(ObjDir)/.dir $(BUILT_SOURCES)
- $(Echo) "Compiling $*.c for $(BuildMode) build" $(PIC_FLAG)
- $(Compile.C) $< -o $@
-
-$(ObjDir)/%.o: %.m $(ObjDir)/.dir $(BUILT_SOURCES)
- $(Echo) "Compiling $*.m for $(BuildMode) build" $(PIC_FLAG)
- $(Compile.C) $< -o $@
-
-$(ObjDir)/%.ll: %.cpp $(ObjDir)/.dir $(BUILT_SOURCES) $(LLVMCXX)
- $(Echo) "Compiling $*.cpp for $(BuildMode) build (bytecode)"
- $(BCCompile.CXX) $< -o $@ -S $(LLVMCC_EMITIR_FLAG)
-
-$(ObjDir)/%.ll: %.mm $(ObjDir)/.dir $(BUILT_SOURCES) $(LLVMCXX)
- $(Echo) "Compiling $*.mm for $(BuildMode) build (bytecode)"
- $(BCCompile.CXX) $< -o $@ -S $(LLVMCC_EMITIR_FLAG)
-
-$(ObjDir)/%.ll: %.cc $(ObjDir)/.dir $(BUILT_SOURCES) $(LLVMCXX)
- $(Echo) "Compiling $*.cc for $(BuildMode) build (bytecode)"
- $(BCCompile.CXX) $< -o $@ -S $(LLVMCC_EMITIR_FLAG)
-
-$(ObjDir)/%.ll: %.c $(ObjDir)/.dir $(BUILT_SOURCES) $(LLVMCC)
- $(Echo) "Compiling $*.c for $(BuildMode) build (bytecode)"
- $(BCCompile.C) $< -o $@ -S $(LLVMCC_EMITIR_FLAG)
-
-$(ObjDir)/%.ll: %.m $(ObjDir)/.dir $(BUILT_SOURCES) $(LLVMCC)
- $(Echo) "Compiling $*.m for $(BuildMode) build (bytecode)"
- $(BCCompile.C) $< -o $@ -S $(LLVMCC_EMITIR_FLAG)
-
-endif
-
-
-## Rules for building preprocessed (.i/.ii) outputs.
-$(BuildMode)/%.ii: %.cpp $(ObjDir)/.dir $(BUILT_SOURCES)
- $(Echo) "Compiling $*.cpp for $(BuildMode) build to .ii file"
- $(Verb) $(Preprocess.CXX) $< -o $@
-
-$(BuildMode)/%.ii: %.mm $(ObjDir)/.dir $(BUILT_SOURCES)
- $(Echo) "Compiling $*.mm for $(BuildMode) build to .ii file"
- $(Verb) $(Preprocess.CXX) $< -o $@
-
-$(BuildMode)/%.ii: %.cc $(ObjDir)/.dir $(BUILT_SOURCES)
- $(Echo) "Compiling $*.cc for $(BuildMode) build to .ii file"
- $(Verb) $(Preprocess.CXX) $< -o $@
-
-$(BuildMode)/%.i: %.c $(ObjDir)/.dir $(BUILT_SOURCES)
- $(Echo) "Compiling $*.c for $(BuildMode) build to .i file"
- $(Verb) $(Preprocess.C) $< -o $@
-
-$(BuildMode)/%.i: %.m $(ObjDir)/.dir $(BUILT_SOURCES)
- $(Echo) "Compiling $*.m for $(BuildMode) build to .i file"
- $(Verb) $(Preprocess.C) $< -o $@
-
-
-$(ObjDir)/%.s: %.cpp $(ObjDir)/.dir $(BUILT_SOURCES)
- $(Echo) "Compiling $*.cpp to asm for $(BuildMode) build" $(PIC_FLAG)
- $(Compile.CXX) $< -o $@ -S
-
-$(ObjDir)/%.s: %.mm $(ObjDir)/.dir $(BUILT_SOURCES)
- $(Echo) "Compiling $*.mm to asm for $(BuildMode) build" $(PIC_FLAG)
- $(Compile.CXX) $< -o $@ -S
-
-$(ObjDir)/%.s: %.cc $(ObjDir)/.dir $(BUILT_SOURCES)
- $(Echo) "Compiling $*.cc to asm for $(BuildMode) build" $(PIC_FLAG)
- $(Compile.CXX) $< -o $@ -S
-
-$(ObjDir)/%.s: %.c $(ObjDir)/.dir $(BUILT_SOURCES)
- $(Echo) "Compiling $*.c to asm for $(BuildMode) build" $(PIC_FLAG)
- $(Compile.C) $< -o $@ -S
-
-$(ObjDir)/%.s: %.m $(ObjDir)/.dir $(BUILT_SOURCES)
- $(Echo) "Compiling $*.m to asm for $(BuildMode) build" $(PIC_FLAG)
- $(Compile.C) $< -o $@ -S
-
-
-# make the C and C++ compilers strip debug info out of bytecode libraries.
-ifdef DEBUG_RUNTIME
-$(ObjectsBC): $(ObjDir)/%.bc: $(ObjDir)/%.ll $(LOPT)
- $(Echo) "Compiling $*.ll to $*.bc for $(BuildMode) build (bytecode)"
- $(Verb) $(LOPT) $< -std-compile-opts -o $@
-else
-$(ObjectsBC): $(ObjDir)/%.bc: $(ObjDir)/%.ll $(LOPT)
- $(Echo) "Compiling $*.ll to $*.bc for $(BuildMode) build (bytecode)"
- $(Verb) $(LOPT) $< -std-compile-opts -strip-debug -o $@
-endif
-
-
-#---------------------------------------------------------
-# Provide rule to build .bc files from .ll sources,
-# regardless of dependencies
-#---------------------------------------------------------
-$(ObjDir)/%.bc: %.ll $(ObjDir)/.dir $(LLVMAS)
- $(Echo) "Compiling $*.ll for $(BuildMode) build"
- $(Verb) $(LLVMAS) $< -f -o $@
-
-###############################################################################
-# TABLEGEN: Provide rules for running tblgen to produce *.inc files
-###############################################################################
-
-ifdef TARGET
-TABLEGEN_INC_FILES_COMMON = 1
-endif
-
-ifdef TABLEGEN_INC_FILES_COMMON
-
-INCFiles := $(filter %.inc,$(BUILT_SOURCES))
-INCTMPFiles := $(INCFiles:%=$(ObjDir)/%.tmp)
-.PRECIOUS: $(INCTMPFiles) $(INCFiles)
-
-# INCFiles rule: All of the tblgen generated files are emitted to
-# $(ObjDir)/%.inc.tmp, instead of emitting them directly to %.inc. This allows
-# us to only "touch" the real file if the contents of it change. IOW, if
-# tblgen is modified, all of the .inc.tmp files are regenerated, but no
-# dependencies of the .inc files are, unless the contents of the .inc file
-# changes.
-$(INCFiles) : %.inc : $(ObjDir)/%.inc.tmp
- $(Verb) $(CMP) -s $@ $< || $(CP) $< $@
-
-endif # TABLEGEN_INC_FILES_COMMON
-
-ifdef TARGET
-
-TDFiles := $(strip $(wildcard $(PROJ_SRC_DIR)/*.td) \
- $(LLVM_SRC_ROOT)/include/llvm/Target/Target.td \
- $(LLVM_SRC_ROOT)/include/llvm/Target/TargetCallingConv.td \
- $(LLVM_SRC_ROOT)/include/llvm/Target/TargetSchedule.td \
- $(LLVM_SRC_ROOT)/include/llvm/Target/TargetSelectionDAG.td \
- $(LLVM_SRC_ROOT)/include/llvm/CodeGen/ValueTypes.td) \
- $(wildcard $(LLVM_SRC_ROOT)/include/llvm/IR/Intrinsics*.td)
-
-# All .inc.tmp files depend on the .td files.
-$(INCTMPFiles) : $(TDFiles)
-
-$(TARGET:%=$(ObjDir)/%GenRegisterInfo.inc.tmp): \
-$(ObjDir)/%GenRegisterInfo.inc.tmp : %.td $(ObjDir)/.dir $(LLVM_TBLGEN)
- $(Echo) "Building $(<F) register info implementation with tblgen"
- $(Verb) $(LLVMTableGen) -gen-register-info -o $(call SYSPATH, $@) $<
-
-$(TARGET:%=$(ObjDir)/%GenInstrInfo.inc.tmp): \
-$(ObjDir)/%GenInstrInfo.inc.tmp : %.td $(ObjDir)/.dir $(LLVM_TBLGEN)
- $(Echo) "Building $(<F) instruction information with tblgen"
- $(Verb) $(LLVMTableGen) -gen-instr-info -o $(call SYSPATH, $@) $<
-
-$(TARGET:%=$(ObjDir)/%GenAsmWriter.inc.tmp): \
-$(ObjDir)/%GenAsmWriter.inc.tmp : %.td $(ObjDir)/.dir $(LLVM_TBLGEN)
- $(Echo) "Building $(<F) assembly writer with tblgen"
- $(Verb) $(LLVMTableGen) -gen-asm-writer -o $(call SYSPATH, $@) $<
-
-$(TARGET:%=$(ObjDir)/%GenAsmWriter1.inc.tmp): \
-$(ObjDir)/%GenAsmWriter1.inc.tmp : %.td $(ObjDir)/.dir $(LLVM_TBLGEN)
- $(Echo) "Building $(<F) assembly writer #1 with tblgen"
- $(Verb) $(LLVMTableGen) -gen-asm-writer -asmwriternum=1 -o $(call SYSPATH, $@) $<
-
-$(TARGET:%=$(ObjDir)/%GenAsmMatcher.inc.tmp): \
-$(ObjDir)/%GenAsmMatcher.inc.tmp : %.td $(ObjDir)/.dir $(LLVM_TBLGEN)
- $(Echo) "Building $(<F) assembly matcher with tblgen"
- $(Verb) $(LLVMTableGen) -gen-asm-matcher -o $(call SYSPATH, $@) $<
-
-$(TARGET:%=$(ObjDir)/%GenMCCodeEmitter.inc.tmp): \
-$(ObjDir)/%GenMCCodeEmitter.inc.tmp: %.td $(ObjDir)/.dir $(LLVM_TBLGEN)
- $(Echo) "Building $(<F) MC code emitter with tblgen"
- $(Verb) $(LLVMTableGen) -gen-emitter -mc-emitter -o $(call SYSPATH, $@) $<
-
-$(TARGET:%=$(ObjDir)/%GenMCPseudoLowering.inc.tmp): \
-$(ObjDir)/%GenMCPseudoLowering.inc.tmp: %.td $(ObjDir)/.dir $(LLVM_TBLGEN)
- $(Echo) "Building $(<F) MC Pseudo instruction expander with tblgen"
- $(Verb) $(LLVMTableGen) -gen-pseudo-lowering -o $(call SYSPATH, $@) $<
-
-$(TARGET:%=$(ObjDir)/%GenCodeEmitter.inc.tmp): \
-$(ObjDir)/%GenCodeEmitter.inc.tmp: %.td $(ObjDir)/.dir $(LLVM_TBLGEN)
- $(Echo) "Building $(<F) code emitter with tblgen"
- $(Verb) $(LLVMTableGen) -gen-emitter -o $(call SYSPATH, $@) $<
-
-$(TARGET:%=$(ObjDir)/%GenDAGISel.inc.tmp): \
-$(ObjDir)/%GenDAGISel.inc.tmp : %.td $(ObjDir)/.dir $(LLVM_TBLGEN)
- $(Echo) "Building $(<F) DAG instruction selector implementation with tblgen"
- $(Verb) $(LLVMTableGen) -gen-dag-isel -o $(call SYSPATH, $@) $<
-
-$(TARGET:%=$(ObjDir)/%GenDisassemblerTables.inc.tmp): \
-$(ObjDir)/%GenDisassemblerTables.inc.tmp : %.td $(ObjDir)/.dir $(LLVM_TBLGEN)
- $(Echo) "Building $(<F) disassembly tables with tblgen"
- $(Verb) $(LLVMTableGen) -gen-disassembler -o $(call SYSPATH, $@) $<
-
-$(TARGET:%=$(ObjDir)/%GenFastISel.inc.tmp): \
-$(ObjDir)/%GenFastISel.inc.tmp : %.td $(ObjDir)/.dir $(LLVM_TBLGEN)
- $(Echo) "Building $(<F) \"fast\" instruction selector implementation with tblgen"
- $(Verb) $(LLVMTableGen) -gen-fast-isel -o $(call SYSPATH, $@) $<
-
-$(TARGET:%=$(ObjDir)/%GenSubtargetInfo.inc.tmp): \
-$(ObjDir)/%GenSubtargetInfo.inc.tmp : %.td $(ObjDir)/.dir $(LLVM_TBLGEN)
- $(Echo) "Building $(<F) subtarget information with tblgen"
- $(Verb) $(LLVMTableGen) -gen-subtarget -o $(call SYSPATH, $@) $<
-
-$(TARGET:%=$(ObjDir)/%GenCallingConv.inc.tmp): \
-$(ObjDir)/%GenCallingConv.inc.tmp : %.td $(ObjDir)/.dir $(LLVM_TBLGEN)
- $(Echo) "Building $(<F) calling convention information with tblgen"
- $(Verb) $(LLVMTableGen) -gen-callingconv -o $(call SYSPATH, $@) $<
-
-$(TARGET:%=$(ObjDir)/%GenIntrinsics.inc.tmp): \
-$(ObjDir)/%GenIntrinsics.inc.tmp : %.td $(ObjDir)/.dir $(LLVM_TBLGEN)
- $(Echo) "Building $(<F) intrinsics information with tblgen"
- $(Verb) $(LLVMTableGen) -gen-tgt-intrinsic -o $(call SYSPATH, $@) $<
-
-$(ObjDir)/ARMGenDecoderTables.inc.tmp : ARM.td $(ObjDir)/.dir $(LLVM_TBLGEN)
- $(Echo) "Building $(<F) decoder tables with tblgen"
- $(Verb) $(LLVMTableGen) -gen-arm-decoder -o $(call SYSPATH, $@) $<
-
-$(ObjDir)/%GenDFAPacketizer.inc.tmp : %.td $(ObjDir)/.dir $(LLVM_TBLGEN)
- $(Echo) "Building $(<F) DFA packetizer tables with tblgen"
- $(Verb) $(LLVMTableGen) -gen-dfa-packetizer -o $(call SYSPATH, $@) $<
-
-clean-local::
- -$(Verb) $(RM) -f $(INCFiles)
-
-endif # TARGET
-
-###############################################################################
-# OTHER RULES: Other rules needed
-###############################################################################
-
-# To create postscript files from dot files...
-ifneq ($(DOT),false)
-%.ps: %.dot
- $(DOT) -Tps < $< > $@
-else
-%.ps: %.dot
- $(Echo) "Cannot build $@: The program dot is not installed"
-endif
-
-# This rules ensures that header files that are removed still have a rule for
-# which they can be "generated." This allows make to ignore them and
-# reproduce the dependency lists.
-%.h:: ;
-%.hpp:: ;
-
-# Define clean-local to clean the current directory. Note that this uses a
-# very conservative approach ensuring that empty variables do not cause
-# errors or disastrous removal.
-clean-local::
-ifneq ($(strip $(ObjRootDir)),)
- -$(Verb) $(RM) -rf $(ObjRootDir)
-endif
-ifneq ($(strip $(SHLIBEXT)),) # Extra paranoia - make real sure SHLIBEXT is set
- -$(Verb) $(RM) -f *$(SHLIBEXT)
-endif
-
-clean-all-local::
- -$(Verb) $(RM) -rf Debug Release Profile
-
-
-###############################################################################
-# DEPENDENCIES: Include the dependency files if we should
-###############################################################################
-ifndef DISABLE_AUTO_DEPENDENCIES
-
-# If its not one of the cleaning targets
-ifndef IS_CLEANING_TARGET
-
-# Get the list of dependency files
-DependSourceFiles := $(basename $(filter %.cpp %.c %.cc %.m %.mm, $(Sources)))
-DependFiles := $(DependSourceFiles:%=$(PROJ_OBJ_DIR)/$(BuildMode)/%.d)
-
-# Include bitcode dependency files if using bitcode libraries
-ifdef BYTECODE_LIBRARY
-DependFiles += $(DependSourceFiles:%=$(PROJ_OBJ_DIR)/$(BuildMode)/%.bc.d)
-endif
-
--include $(DependFiles) ""
-
-endif
-
-endif
-
-###############################################################################
-# CHECK: Running the test suite
-###############################################################################
-
-check:: all
- $(Verb) if test -d "$(PROJ_OBJ_ROOT)/test" ; then \
- if test -f "$(PROJ_OBJ_ROOT)/test/Makefile" ; then \
- $(EchoCmd) Running test suite ; \
- $(MAKE) -C $(PROJ_OBJ_ROOT)/test check-local \
- TESTSUITE=$(TESTSUITE) ; \
- else \
- $(EchoCmd) No Makefile in test directory ; \
- fi ; \
- else \
- $(EchoCmd) No test directory ; \
- fi
-
-# An alias dating from when both lit and DejaGNU test runners were used.
-check-lit:: check
-
-check-all::
- $(Verb) if test -d "$(PROJ_OBJ_ROOT)/test" ; then \
- if test -f "$(PROJ_OBJ_ROOT)/test/Makefile" ; then \
- $(EchoCmd) Running test suite ; \
- $(MAKE) -C $(PROJ_OBJ_ROOT)/test check-local-all ; \
- else \
- $(EchoCmd) No Makefile in test directory ; \
- fi ; \
- else \
- $(EchoCmd) No test directory ; \
- fi
-
-###############################################################################
-# UNITTESTS: Running the unittests test suite
-###############################################################################
-
-unittests::
- $(Verb) if test -d "$(PROJ_OBJ_ROOT)/unittests" ; then \
- if test -f "$(PROJ_OBJ_ROOT)/unittests/Makefile" ; then \
- $(EchoCmd) Running unittests test suite ; \
- $(MAKE) -C $(PROJ_OBJ_ROOT)/unittests unitcheck; \
- else \
- $(EchoCmd) No Makefile in unittests directory ; \
- fi ; \
- else \
- $(EchoCmd) No unittests directory ; \
- fi
-
-###############################################################################
-# DISTRIBUTION: Handle construction of a distribution tarball
-###############################################################################
-
-#------------------------------------------------------------------------
-# Define distribution related variables
-#------------------------------------------------------------------------
-DistName := $(PROJECT_NAME)-$(PROJ_VERSION)
-DistDir := $(PROJ_OBJ_ROOT)/$(DistName)
-TopDistDir := $(PROJ_OBJ_ROOT)/$(DistName)
-DistTarGZip := $(PROJ_OBJ_ROOT)/$(DistName).tar.gz
-DistZip := $(PROJ_OBJ_ROOT)/$(DistName).zip
-DistTarBZ2 := $(PROJ_OBJ_ROOT)/$(DistName).tar.bz2
-DistAlways := CREDITS.TXT LICENSE.TXT README.txt README AUTHORS COPYING \
- ChangeLog INSTALL NEWS Makefile Makefile.common Makefile.rules \
- Makefile.config.in configure autoconf
-DistOther := $(notdir $(wildcard \
- $(PROJ_SRC_DIR)/*.h \
- $(PROJ_SRC_DIR)/*.td \
- $(PROJ_SRC_DIR)/*.def \
- $(PROJ_SRC_DIR)/*.ll \
- $(PROJ_SRC_DIR)/*.in))
-DistSubDirs := $(SubDirs)
-DistSources = $(Sources) $(EXTRA_DIST)
-DistFiles = $(DistAlways) $(DistSources) $(DistOther)
-
-#------------------------------------------------------------------------
-# We MUST build distribution with OBJ_DIR != SRC_DIR
-#------------------------------------------------------------------------
-ifeq ($(PROJ_SRC_DIR),$(PROJ_OBJ_DIR))
-dist dist-check dist-clean dist-gzip dist-bzip2 dist-zip ::
- $(Echo) ERROR: Target $@ only available with OBJ_DIR != SRC_DIR
-
-else
-
-#------------------------------------------------------------------------
-# Prevent attempt to run dist targets from anywhere but the top level
-#------------------------------------------------------------------------
-ifneq ($(LEVEL),.)
-dist dist-check dist-clean dist-gzip dist-bzip2 dist-zip ::
- $(Echo) ERROR: You must run $@ from $(PROJ_OBJ_ROOT)
-else
-
-#------------------------------------------------------------------------
-# Provide the top level targets
-#------------------------------------------------------------------------
-
-dist-gzip:: $(DistTarGZip)
-
-$(DistTarGZip) : $(TopDistDir)/.makedistdir
- $(Echo) Packing gzipped distribution tar file.
- $(Verb) cd $(PROJ_OBJ_ROOT) ; $(TAR) chf - "$(DistName)" | \
- $(GZIP) -c > "$(DistTarGZip)"
-
-dist-bzip2:: $(DistTarBZ2)
-
-$(DistTarBZ2) : $(TopDistDir)/.makedistdir
- $(Echo) Packing bzipped distribution tar file.
- $(Verb) cd $(PROJ_OBJ_ROOT) ; $(TAR) chf - $(DistName) | \
- $(BZIP2) -c >$(DistTarBZ2)
-
-dist-zip:: $(DistZip)
-
-$(DistZip) : $(TopDistDir)/.makedistdir
- $(Echo) Packing zipped distribution file.
- $(Verb) rm -f $(DistZip)
- $(Verb) cd $(PROJ_OBJ_ROOT) ; $(ZIP) -rq $(DistZip) $(DistName)
-
-dist :: $(DistTarGZip) $(DistTarBZ2) $(DistZip)
- $(Echo) ===== DISTRIBUTION PACKAGING SUCCESSFUL =====
-
-DistCheckDir := $(PROJ_OBJ_ROOT)/_distcheckdir
-
-dist-check:: $(DistTarGZip)
- $(Echo) Checking distribution tar file.
- $(Verb) if test -d $(DistCheckDir) ; then \
- $(RM) -rf $(DistCheckDir) ; \
- fi
- $(Verb) $(MKDIR) $(DistCheckDir)
- $(Verb) cd $(DistCheckDir) && \
- $(MKDIR) $(DistCheckDir)/build && \
- $(MKDIR) $(DistCheckDir)/install && \
- gunzip -c $(DistTarGZip) | $(TAR) xf - && \
- cd build && \
- ../$(DistName)/configure --prefix="$(DistCheckDir)/install" \
- --srcdir=../$(DistName) $(DIST_CHECK_CONFIG_OPTIONS) && \
- $(MAKE) all && \
- $(MAKE) check && \
- $(MAKE) unittests && \
- $(MAKE) install && \
- $(MAKE) uninstall && \
- $(MAKE) dist-clean && \
- $(EchoCmd) ===== $(DistTarGZip) Ready For Distribution =====
-
-dist-clean::
- $(Echo) Cleaning distribution files
- -$(Verb) $(RM) -rf $(DistTarGZip) $(DistTarBZ2) $(DistZip) $(DistName) \
- $(DistCheckDir)
-
-endif
-
-#------------------------------------------------------------------------
-# Provide the recursive distdir target for building the distribution directory
-#------------------------------------------------------------------------
-distdir: $(DistDir)/.makedistdir
-$(DistDir)/.makedistdir: $(DistSources)
- $(Verb) if test "$(DistDir)" = "$(TopDistDir)" ; then \
- if test -d "$(DistDir)" ; then \
- find $(DistDir) -type d ! -perm -200 -exec chmod u+w {} ';' || \
- exit 1 ; \
- fi ; \
- $(EchoCmd) Removing old $(DistDir) ; \
- $(RM) -rf $(DistDir); \
- $(EchoCmd) Making 'all' to verify build ; \
- $(MAKE) ENABLE_OPTIMIZED=1 all ; \
- fi
- $(Echo) Building Distribution Directory $(DistDir)
- $(Verb) $(MKDIR) $(DistDir)
- $(Verb) srcdirstrip=`echo "$(PROJ_SRC_DIR)" | sed 's|.|.|g'`; \
- srcrootstrip=`echo "$(PROJ_SRC_ROOT)" | sed 's|.|.|g'`; \
- for file in $(DistFiles) ; do \
- case "$$file" in \
- $(PROJ_SRC_DIR)/*) \
- file=`echo "$$file" | sed "s#^$$srcdirstrip/##"` \
- ;; \
- $(PROJ_SRC_ROOT)/*) \
- file=`echo "$$file" | \
- sed "s#^$$srcrootstrip/##"` \
- ;; \
- esac; \
- if test -f "$(PROJ_SRC_DIR)/$$file" || \
- test -d "$(PROJ_SRC_DIR)/$$file" ; then \
- from_dir="$(PROJ_SRC_DIR)" ; \
- elif test -f "$$file" || test -d "$$file" ; then \
- from_dir=. ; \
- fi ; \
- to_dir=`echo "$$file" | sed -e 's#/[^/]*$$##'` ; \
- if test "$$to_dir" != "$$file" && test "$$to_dir" != "."; then \
- to_dir="$(DistDir)/$$dir"; \
- $(MKDIR) "$$to_dir" ; \
- else \
- to_dir="$(DistDir)"; \
- fi; \
- mid_dir=`echo "$$file" | sed -n -e 's#^\(.*\)/[^/]*$$#\1#p'`; \
- if test -n "$$mid_dir" ; then \
- $(MKDIR) "$$to_dir/$$mid_dir" || exit 1; \
- fi ; \
- if test -d "$$from_dir/$$file"; then \
- if test -d "$(PROJ_SRC_DIR)/$$file" && \
- test "$$from_dir" != "$(PROJ_SRC_DIR)" ; then \
- cd $(PROJ_SRC_DIR) ; \
- $(TAR) cf - $$file --exclude .svn --exclude CVS | \
- ( cd $$to_dir ; $(TAR) xf - ) ; \
- cd $(PROJ_OBJ_DIR) ; \
- else \
- cd $$from_dir ; \
- $(TAR) cf - $$file --exclude .svn --exclude CVS | \
- ( cd $$to_dir ; $(TAR) xf - ) ; \
- cd $(PROJ_OBJ_DIR) ; \
- fi; \
- elif test -f "$$from_dir/$$file" ; then \
- $(CP) -p "$$from_dir/$$file" "$(DistDir)/$$file" || exit 1; \
- elif test -L "$$from_dir/$$file" ; then \
- $(CP) -pd "$$from_dir/$$file" $(DistDir)/$$file || exit 1; \
- elif echo "$(DistAlways)" | grep -v "$$file" >/dev/null ; then \
- $(EchoCmd) "===== WARNING: Distribution Source " \
- "$$from_dir/$$file Not Found!" ; \
- elif test "$(Verb)" != '@' ; then \
- $(EchoCmd) "Skipping non-existent $$from_dir/$$file" ; \
- fi; \
- done
- $(Verb) for subdir in $(DistSubDirs) ; do \
- if test "$$subdir" \!= "." ; then \
- new_distdir="$(DistDir)/$$subdir" ; \
- test -d "$$new_distdir" || $(MKDIR) "$$new_distdir" || exit 1; \
- ( cd $$subdir && $(MAKE) ENABLE_OPTIMIZED=1 \
- DistDir="$$new_distdir" distdir ) || exit 1; \
- fi; \
- done
- $(Verb) if test "$(DistDir)" = "$(TopDistDir)" ; then \
- $(EchoCmd) Eliminating CVS/.svn directories from distribution ; \
- $(RM) -rf `find $(TopDistDir) -type d \( -name CVS -o \
- -name .svn \) -print` ;\
- $(MAKE) dist-hook ; \
- $(FIND) $(TopDistDir) -type d ! -perm -777 -exec chmod a+rwx {} \; \
- -o ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; \
- -o ! -type d ! -perm -400 -exec chmod a+r {} \; \
- -o ! -type d ! -perm -444 -exec \
- $(SHELL) $(INSTALL_SH) -c -m a+r {} {} \; \
- || chmod -R a+r $(DistDir) ; \
- fi
-
-# This is invoked by distdir target, define it as a no-op to avoid errors if not
-# defined by user.
-dist-hook::
-
-endif
-
-###############################################################################
-# TOP LEVEL - targets only to apply at the top level directory
-###############################################################################
-
-ifeq ($(LEVEL),.)
-
-#------------------------------------------------------------------------
-# Install support for the project's include files:
-#------------------------------------------------------------------------
-ifdef NO_INSTALL
-install-local::
- $(Echo) Install circumvented with NO_INSTALL
-uninstall-local::
- $(Echo) Uninstall circumvented with NO_INSTALL
-else
-install-local::
- $(Echo) Installing include files
- $(Verb) $(MKDIR) $(DESTDIR)$(PROJ_includedir)
- $(Verb) if test -d "$(PROJ_SRC_ROOT)/include" ; then \
- cd $(PROJ_SRC_ROOT)/include && \
- for hdr in `find . -type f \
- '(' -name LICENSE.TXT \
- -o -name '*.def' \
- -o -name '*.h' \
- -o -name '*.inc' \
- -o -name '*.td' \
- ')' -print | grep -v CVS | \
- grep -v .svn` ; do \
- instdir=`dirname "$(DESTDIR)$(PROJ_includedir)/$$hdr"` ; \
- if test \! -d "$$instdir" ; then \
- $(EchoCmd) Making install directory $$instdir ; \
- $(MKDIR) $$instdir ;\
- fi ; \
- $(DataInstall) $$hdr $(DESTDIR)$(PROJ_includedir)/$$hdr ; \
- done ; \
- fi
-ifneq ($(PROJ_SRC_ROOT),$(PROJ_OBJ_ROOT))
- $(Verb) if test -d "$(PROJ_OBJ_ROOT)/include" ; then \
- cd $(PROJ_OBJ_ROOT)/include && \
- for hdr in `find . -type f \
- '(' -name LICENSE.TXT \
- -o -name '*.def' \
- -o -name '*.h' \
- -o -name '*.inc' \
- -o -name '*.td' \
- ')' -print | grep -v CVS | \
- grep -v .svn` ; do \
- instdir=`dirname "$(DESTDIR)$(PROJ_includedir)/$$hdr"` ; \
- if test \! -d "$$instdir" ; then \
- $(EchoCmd) Making install directory $$instdir ; \
- $(MKDIR) $$instdir ;\
- fi ; \
- $(DataInstall) $$hdr $(DESTDIR)$(PROJ_includedir)/$$hdr ; \
- done ; \
- fi
-endif
-
-uninstall-local::
- $(Echo) Uninstalling include files
- $(Verb) if [ -d "$(PROJ_SRC_ROOT)/include" ] ; then \
- cd $(PROJ_SRC_ROOT)/include && \
- $(RM) -f `find . -path '*/Internal' -prune -o '(' -type f \
- '!' '(' -name '*~' -o -name '.#*' \
- -o -name '*.in' ')' -print ')' | \
- grep -v CVS | sed 's#^#$(DESTDIR)$(PROJ_includedir)/#'` ; \
- cd $(PROJ_SRC_ROOT)/include && \
- $(RM) -f `find . -path '*/Internal' -prune -o '(' -type f -name '*.in' \
- -print ')' | sed 's#\.in$$##;s#^#$(DESTDIR)$(PROJ_includedir)/#'` ; \
- fi
-endif
-endif
-
-check-line-length:
- @echo searching for overlength lines in files: $(Sources)
- @echo
- @echo
- egrep -n '.{81}' $(Sources) /dev/null
-
-check-for-tabs:
- @echo searching for tabs in files: $(Sources)
- @echo
- @echo
- egrep -n ' ' $(Sources) /dev/null
-
-check-footprint:
- @ls -l $(LibDir) | awk '\
- BEGIN { sum = 0; } \
- { sum += $$5; } \
- END { printf("Libraries: %6.3f MBytes\n", sum/(1024.0*1024.0)); }'
- @ls -l $(ToolDir) | awk '\
- BEGIN { sum = 0; } \
- { sum += $$5; } \
- END { printf("Programs: %6.3f MBytes\n", sum/(1024.0*1024.0)); }'
-#------------------------------------------------------------------------
-# Print out the directories used for building
-#------------------------------------------------------------------------
-printvars::
- $(Echo) "BuildMode : " '$(BuildMode)'
- $(Echo) "PROJ_SRC_ROOT: " '$(PROJ_SRC_ROOT)'
- $(Echo) "PROJ_SRC_DIR : " '$(PROJ_SRC_DIR)'
- $(Echo) "PROJ_OBJ_ROOT: " '$(PROJ_OBJ_ROOT)'
- $(Echo) "PROJ_OBJ_DIR : " '$(PROJ_OBJ_DIR)'
- $(Echo) "LLVM_SRC_ROOT: " '$(LLVM_SRC_ROOT)'
- $(Echo) "LLVM_OBJ_ROOT: " '$(LLVM_OBJ_ROOT)'
- $(Echo) "PROJ_prefix : " '$(PROJ_prefix)'
- $(Echo) "PROJ_internal_prefix : " '$(PROJ_internal_prefix)'
- $(Echo) "PROJ_bindir : " '$(PROJ_bindir)'
- $(Echo) "PROJ_libdir : " '$(PROJ_libdir)'
- $(Echo) "PROJ_etcdir : " '$(PROJ_etcdir)'
- $(Echo) "PROJ_includedir : " '$(PROJ_includedir)'
- $(Echo) "UserTargets : " '$(UserTargets)'
- $(Echo) "ObjMakefiles : " '$(ObjMakefiles)'
- $(Echo) "SrcMakefiles : " '$(SrcMakefiles)'
- $(Echo) "ObjDir : " '$(ObjDir)'
- $(Echo) "LibDir : " '$(LibDir)'
- $(Echo) "ToolDir : " '$(ToolDir)'
- $(Echo) "ExmplDir : " '$(ExmplDir)'
- $(Echo) "Sources : " '$(Sources)'
- $(Echo) "TDFiles : " '$(TDFiles)'
- $(Echo) "INCFiles : " '$(INCFiles)'
- $(Echo) "INCTMPFiles : " '$(INCTMPFiles)'
- $(Echo) "PreConditions: " '$(PreConditions)'
- $(Echo) "Compile.CXX : " '$(Compile.CXX)'
- $(Echo) "Compile.C : " '$(Compile.C)'
- $(Echo) "Archive : " '$(Archive)'
- $(Echo) "YaccFiles : " '$(YaccFiles)'
- $(Echo) "LexFiles : " '$(LexFiles)'
- $(Echo) "Module : " '$(Module)'
- $(Echo) "FilesToConfig: " '$(FilesToConfigPATH)'
- $(Echo) "SubDirs : " '$(SubDirs)'
- $(Echo) "ProjLibsPaths: " '$(ProjLibsPaths)'
- $(Echo) "ProjLibsOptions: " '$(ProjLibsOptions)'
-
-###
-# Debugging
-
-# General debugging rule, use 'make dbg-print-XXX' to print the
-# definition, value and origin of XXX.
-make-print-%:
- $(error PRINT: $(value $*) = "$($*)" (from $(origin $*)))
Deleted: trunk/contrib/llvm/README.txt
===================================================================
--- trunk/contrib/llvm/README.txt 2015-06-21 18:59:54 UTC (rev 7065)
+++ trunk/contrib/llvm/README.txt 2015-06-21 19:01:11 UTC (rev 7066)
@@ -1,18 +0,0 @@
-Low Level Virtual Machine (LLVM)
-================================
-
-This directory and its subdirectories contain source code for the Low Level
-Virtual Machine, a toolkit for the construction of highly optimized compilers,
-optimizers, and runtime environments.
-
-LLVM is open source software. You may freely distribute it under the terms of
-the license agreement found in LICENSE.txt.
-
-Please see the documentation provided in docs/ for further
-assistance with LLVM, and in particular docs/GettingStarted.rst for getting
-started with LLVM and docs/README.txt for an overview of LLVM's
-documentation setup.
-
-If you're writing a package for LLVM, see docs/Packaging.rst for our
-suggestions.
-
Deleted: trunk/contrib/llvm/configure
===================================================================
--- trunk/contrib/llvm/configure 2015-06-21 18:59:54 UTC (rev 7065)
+++ trunk/contrib/llvm/configure 2015-06-21 19:01:11 UTC (rev 7066)
@@ -1,24214 +0,0 @@
-#! /bin/sh
-# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.60 for LLVM 3.3.
-#
-# Report bugs to <http://llvm.org/bugs/>.
-#
-# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-# 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-#
-# Copyright (c) 2003-2013 University of Illinois at Urbana-Champaign.
-## --------------------- ##
-## M4sh Initialization. ##
-## --------------------- ##
-
-# Be Bourne compatible
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
- emulate sh
- NULLCMD=:
- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
- setopt NO_GLOB_SUBST
-else
- case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
-fi
-BIN_SH=xpg4; export BIN_SH # for Tru64
-DUALCASE=1; export DUALCASE # for MKS sh
-
-
-# PATH needs CR
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- echo "#! /bin/sh" >conf$$.sh
- echo "exit 0" >>conf$$.sh
- chmod +x conf$$.sh
- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
- PATH_SEPARATOR=';'
- else
- PATH_SEPARATOR=:
- fi
- rm -f conf$$.sh
-fi
-
-# Support unset when possible.
-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
- as_unset=unset
-else
- as_unset=false
-fi
-
-
-# IFS
-# We need space, tab and new line, in precisely that order. Quoting is
-# there to prevent editors from complaining about space-tab.
-# (If _AS_PATH_WALK were called with IFS unset, it would disable word
-# splitting by setting IFS to empty value.)
-as_nl='
-'
-IFS=" "" $as_nl"
-
-# Find who we are. Look in the path if we contain no directory separator.
-case $0 in
- *[\\/]* ) as_myself=$0 ;;
- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
-IFS=$as_save_IFS
-
- ;;
-esac
-# We did not find ourselves, most probably we were run as `sh COMMAND'
-# in which case we are not to be found in the path.
-if test "x$as_myself" = x; then
- as_myself=$0
-fi
-if test ! -f "$as_myself"; then
- echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
- { (exit 1); exit 1; }
-fi
-
-# Work around bugs in pre-3.0 UWIN ksh.
-for as_var in ENV MAIL MAILPATH
-do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-done
-PS1='$ '
-PS2='> '
-PS4='+ '
-
-# NLS nuisances.
-for as_var in \
- LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
- LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
- LC_TELEPHONE LC_TIME
-do
- if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
- eval $as_var=C; export $as_var
- else
- ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
- fi
-done
-
-# Required to use basename.
-if expr a : '\(a\)' >/dev/null 2>&1 &&
- test "X`expr 00001 : '.*\(...\)'`" = X001; then
- as_expr=expr
-else
- as_expr=false
-fi
-
-if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
- as_basename=basename
-else
- as_basename=false
-fi
-
-
-# Name of the executable.
-as_me=`$as_basename -- "$0" ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
- X"$0" : 'X\(//\)$' \| \
- X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-echo X/"$0" |
- sed '/^.*\/\([^/][^/]*\)\/*$/{
- s//\1/
- q
- }
- /^X\/\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\/\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
-
-# CDPATH.
-$as_unset CDPATH
-
-
-if test "x$CONFIG_SHELL" = x; then
- if (eval ":") 2>/dev/null; then
- as_have_required=yes
-else
- as_have_required=no
-fi
-
- if test $as_have_required = yes && (eval ":
-(as_func_return () {
- (exit \$1)
-}
-as_func_success () {
- as_func_return 0
-}
-as_func_failure () {
- as_func_return 1
-}
-as_func_ret_success () {
- return 0
-}
-as_func_ret_failure () {
- return 1
-}
-
-exitcode=0
-if as_func_success; then
- :
-else
- exitcode=1
- echo as_func_success failed.
-fi
-
-if as_func_failure; then
- exitcode=1
- echo as_func_failure succeeded.
-fi
-
-if as_func_ret_success; then
- :
-else
- exitcode=1
- echo as_func_ret_success failed.
-fi
-
-if as_func_ret_failure; then
- exitcode=1
- echo as_func_ret_failure succeeded.
-fi
-
-if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
- :
-else
- exitcode=1
- echo positional parameters were not saved.
-fi
-
-test \$exitcode = 0) || { (exit 1); exit 1; }
-
-(
- as_lineno_1=\$LINENO
- as_lineno_2=\$LINENO
- test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" &&
- test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; }
-") 2> /dev/null; then
- :
-else
- as_candidate_shells=
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in /usr/bin/posix$PATH_SEPARATOR/bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- case $as_dir in
- /*)
- for as_base in sh bash ksh sh5; do
- as_candidate_shells="$as_candidate_shells $as_dir/$as_base"
- done;;
- esac
-done
-IFS=$as_save_IFS
-
-
- for as_shell in $as_candidate_shells $SHELL; do
- # Try only shells that exist, to save several forks.
- if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
- { ("$as_shell") 2> /dev/null <<\_ASEOF
-# Be Bourne compatible
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
- emulate sh
- NULLCMD=:
- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
- setopt NO_GLOB_SUBST
-else
- case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
-fi
-BIN_SH=xpg4; export BIN_SH # for Tru64
-DUALCASE=1; export DUALCASE # for MKS sh
-
-:
-_ASEOF
-}; then
- CONFIG_SHELL=$as_shell
- as_have_required=yes
- if { "$as_shell" 2> /dev/null <<\_ASEOF
-# Be Bourne compatible
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
- emulate sh
- NULLCMD=:
- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
- setopt NO_GLOB_SUBST
-else
- case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
-fi
-BIN_SH=xpg4; export BIN_SH # for Tru64
-DUALCASE=1; export DUALCASE # for MKS sh
-
-:
-(as_func_return () {
- (exit $1)
-}
-as_func_success () {
- as_func_return 0
-}
-as_func_failure () {
- as_func_return 1
-}
-as_func_ret_success () {
- return 0
-}
-as_func_ret_failure () {
- return 1
-}
-
-exitcode=0
-if as_func_success; then
- :
-else
- exitcode=1
- echo as_func_success failed.
-fi
-
-if as_func_failure; then
- exitcode=1
- echo as_func_failure succeeded.
-fi
-
-if as_func_ret_success; then
- :
-else
- exitcode=1
- echo as_func_ret_success failed.
-fi
-
-if as_func_ret_failure; then
- exitcode=1
- echo as_func_ret_failure succeeded.
-fi
-
-if ( set x; as_func_ret_success y && test x = "$1" ); then
- :
-else
- exitcode=1
- echo positional parameters were not saved.
-fi
-
-test $exitcode = 0) || { (exit 1); exit 1; }
-
-(
- as_lineno_1=$LINENO
- as_lineno_2=$LINENO
- test "x$as_lineno_1" != "x$as_lineno_2" &&
- test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; }
-
-_ASEOF
-}; then
- break
-fi
-
-fi
-
- done
-
- if test "x$CONFIG_SHELL" != x; then
- for as_var in BASH_ENV ENV
- do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
- done
- export CONFIG_SHELL
- exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
-fi
-
-
- if test $as_have_required = no; then
- echo This script requires a shell more modern than all the
- echo shells that I found on your system. Please install a
- echo modern shell, or manually run the script under such a
- echo shell if you do have one.
- { (exit 1); exit 1; }
-fi
-
-
-fi
-
-fi
-
-
-
-(eval "as_func_return () {
- (exit \$1)
-}
-as_func_success () {
- as_func_return 0
-}
-as_func_failure () {
- as_func_return 1
-}
-as_func_ret_success () {
- return 0
-}
-as_func_ret_failure () {
- return 1
-}
-
-exitcode=0
-if as_func_success; then
- :
-else
- exitcode=1
- echo as_func_success failed.
-fi
-
-if as_func_failure; then
- exitcode=1
- echo as_func_failure succeeded.
-fi
-
-if as_func_ret_success; then
- :
-else
- exitcode=1
- echo as_func_ret_success failed.
-fi
-
-if as_func_ret_failure; then
- exitcode=1
- echo as_func_ret_failure succeeded.
-fi
-
-if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
- :
-else
- exitcode=1
- echo positional parameters were not saved.
-fi
-
-test \$exitcode = 0") || {
- echo No shell found that supports shell functions.
- echo Please tell autoconf at gnu.org about your system,
- echo including any error possibly output before this
- echo message
-}
-
-
-
- as_lineno_1=$LINENO
- as_lineno_2=$LINENO
- test "x$as_lineno_1" != "x$as_lineno_2" &&
- test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
-
- # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
- # uniformly replaced by the line number. The first 'sed' inserts a
- # line-number line after each line using $LINENO; the second 'sed'
- # does the real work. The second script uses 'N' to pair each
- # line-number line with the line containing $LINENO, and appends
- # trailing '-' during substitution so that $LINENO is not a special
- # case at line end.
- # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
- # scripts with optimization help from Paolo Bonzini. Blame Lee
- # E. McMahon (1931-1989) for sed's syntax. :-)
- sed -n '
- p
- /[$]LINENO/=
- ' <$as_myself |
- sed '
- s/[$]LINENO.*/&-/
- t lineno
- b
- :lineno
- N
- :loop
- s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
- t loop
- s/-\n.*//
- ' >$as_me.lineno &&
- chmod +x "$as_me.lineno" ||
- { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
- { (exit 1); exit 1; }; }
-
- # Don't try to exec as it changes $[0], causing all sort of problems
- # (the dirname of $[0] is not the place where we might find the
- # original and so on. Autoconf is especially sensitive to this).
- . "./$as_me.lineno"
- # Exit status is that of the last command.
- exit
-}
-
-
-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
- as_dirname=dirname
-else
- as_dirname=false
-fi
-
-ECHO_C= ECHO_N= ECHO_T=
-case `echo -n x` in
--n*)
- case `echo 'x\c'` in
- *c*) ECHO_T=' ';; # ECHO_T is single tab character.
- *) ECHO_C='\c';;
- esac;;
-*)
- ECHO_N='-n';;
-esac
-
-if expr a : '\(a\)' >/dev/null 2>&1 &&
- test "X`expr 00001 : '.*\(...\)'`" = X001; then
- as_expr=expr
-else
- as_expr=false
-fi
-
-rm -f conf$$ conf$$.exe conf$$.file
-if test -d conf$$.dir; then
- rm -f conf$$.dir/conf$$.file
-else
- rm -f conf$$.dir
- mkdir conf$$.dir
-fi
-echo >conf$$.file
-if ln -s conf$$.file conf$$ 2>/dev/null; then
- as_ln_s='ln -s'
- # ... but there are two gotchas:
- # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
- # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
- # In both cases, we have to default to `cp -p'.
- ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
- as_ln_s='cp -p'
-elif ln conf$$.file conf$$ 2>/dev/null; then
- as_ln_s=ln
-else
- as_ln_s='cp -p'
-fi
-rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
-rmdir conf$$.dir 2>/dev/null
-
-if mkdir -p . 2>/dev/null; then
- as_mkdir_p=:
-else
- test -d ./-p && rmdir ./-p
- as_mkdir_p=false
-fi
-
-# Find out whether ``test -x'' works. Don't use a zero-byte file, as
-# systems may use methods other than mode bits to determine executability.
-cat >conf$$.file <<_ASEOF
-#! /bin/sh
-exit 0
-_ASEOF
-chmod +x conf$$.file
-if test -x conf$$.file >/dev/null 2>&1; then
- as_executable_p="test -x"
-else
- as_executable_p=:
-fi
-rm -f conf$$.file
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
-
-
-exec 7<&0 </dev/null 6>&1
-
-# Name of the host.
-# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
-# so uname gets run too.
-ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
-
-#
-# Initializations.
-#
-ac_default_prefix=/usr/local
-ac_clean_files=
-ac_config_libobj_dir=.
-LIBOBJS=
-cross_compiling=no
-subdirs=
-MFLAGS=
-MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-
-# Identity of this package.
-PACKAGE_NAME='LLVM'
-PACKAGE_TARNAME='llvm'
-PACKAGE_VERSION='3.3'
-PACKAGE_STRING='LLVM 3.3'
-PACKAGE_BUGREPORT='http://llvm.org/bugs/'
-
-ac_unique_file="lib/IR/Module.cpp"
-# Factoring default headers for most tests.
-ac_includes_default="\
-#include <stdio.h>
-#if HAVE_SYS_TYPES_H
-# include <sys/types.h>
-#endif
-#if HAVE_SYS_STAT_H
-# include <sys/stat.h>
-#endif
-#if STDC_HEADERS
-# include <stdlib.h>
-# include <stddef.h>
-#else
-# if HAVE_STDLIB_H
-# include <stdlib.h>
-# endif
-#endif
-#if HAVE_STRING_H
-# if !STDC_HEADERS && HAVE_MEMORY_H
-# include <memory.h>
-# endif
-# include <string.h>
-#endif
-#if HAVE_STRINGS_H
-# include <strings.h>
-#endif
-#if HAVE_INTTYPES_H
-# include <inttypes.h>
-#endif
-#if HAVE_STDINT_H
-# include <stdint.h>
-#endif
-#if HAVE_UNISTD_H
-# include <unistd.h>
-#endif"
-
-ac_subst_vars='SHELL
-PATH_SEPARATOR
-PACKAGE_NAME
-PACKAGE_TARNAME
-PACKAGE_VERSION
-PACKAGE_STRING
-PACKAGE_BUGREPORT
-exec_prefix
-prefix
-program_transform_name
-bindir
-sbindir
-libexecdir
-datarootdir
-datadir
-sysconfdir
-sharedstatedir
-localstatedir
-includedir
-oldincludedir
-docdir
-infodir
-htmldir
-dvidir
-pdfdir
-psdir
-libdir
-localedir
-mandir
-DEFS
-ECHO_C
-ECHO_N
-ECHO_T
-LIBS
-build_alias
-host_alias
-target_alias
-LLVM_COPYRIGHT
-CC
-CFLAGS
-LDFLAGS
-CPPFLAGS
-ac_ct_CC
-EXEEXT
-OBJEXT
-CXX
-CXXFLAGS
-ac_ct_CXX
-CPP
-subdirs
-ENABLE_POLLY
-LLVM_HAS_POLLY
-build
-build_cpu
-build_vendor
-build_os
-host
-host_cpu
-host_vendor
-host_os
-target
-target_cpu
-target_vendor
-target_os
-OS
-HOST_OS
-TARGET_OS
-LINKALL
-NOLINKALL
-LLVM_ON_UNIX
-LLVM_ON_WIN32
-ARCH
-HOST_ARCH
-ENDIAN
-GREP
-EGREP
-LLVM_CROSS_COMPILING
-BUILD_CC
-BUILD_EXEEXT
-BUILD_CXX
-CVSBUILD
-ENABLE_LIBCPP
-ENABLE_CXX11
-ENABLE_CLANG_ARCMT
-ENABLE_CLANG_STATIC_ANALYZER
-ENABLE_CLANG_REWRITER
-ENABLE_OPTIMIZED
-ENABLE_PROFILING
-DISABLE_ASSERTIONS
-ENABLE_WERROR
-ENABLE_EXPENSIVE_CHECKS
-EXPENSIVE_CHECKS
-DEBUG_RUNTIME
-DEBUG_SYMBOLS
-KEEP_SYMBOLS
-JIT
-TARGET_HAS_JIT
-ENABLE_DOCS
-ENABLE_DOXYGEN
-LLVM_ENABLE_THREADS
-ENABLE_PTHREADS
-LLVM_ENABLE_ZLIB
-ENABLE_PIC
-ENABLE_SHARED
-ENABLE_EMBED_STDCXX
-ENABLE_TIMESTAMPS
-ENABLE_BACKTRACES
-TARGETS_TO_BUILD
-LLVM_ENUM_TARGETS
-LLVM_ENUM_ASM_PRINTERS
-LLVM_ENUM_ASM_PARSERS
-LLVM_ENUM_DISASSEMBLERS
-OPTIMIZE_OPTION
-EXTRA_OPTIONS
-EXTRA_LD_OPTIONS
-CLANG_SRC_ROOT
-BINUTILS_INCDIR
-INTERNAL_PREFIX
-NM
-ifGNUmake
-LN_S
-CMP
-CP
-DATE
-FIND
-MKDIR
-MV
-RANLIB
-AR
-RM
-SED
-TAR
-BINPWD
-GRAPHVIZ
-DOT
-FDP
-NEATO
-TWOPI
-CIRCO
-GV
-DOTTY
-XDOT_PY
-INSTALL_PROGRAM
-INSTALL_SCRIPT
-INSTALL_DATA
-BZIP2
-CAT
-DOXYGEN
-GROFF
-GZIPBIN
-PDFROFF
-ZIP
-OCAMLC
-OCAMLOPT
-OCAMLDEP
-OCAMLDOC
-GAS
-HAVE_LINK_VERSION_SCRIPT
-INSTALL_LTDL_TRUE
-INSTALL_LTDL_FALSE
-CONVENIENCE_LTDL_TRUE
-CONVENIENCE_LTDL_FALSE
-LIBADD_DL
-NO_VARIADIC_MACROS
-NO_MISSING_FIELD_INITIALIZERS
-COVERED_SWITCH_DEFAULT
-NO_MAYBE_UNINITIALIZED
-NO_UNINITIALIZED
-PYTHON
-USE_UDIS86
-USE_OPROFILE
-USE_INTEL_JITEVENTS
-XML2CONFIG
-LIBXML2_LIBS
-LIBXML2_INC
-CXXCPP
-HAVE_PTHREAD
-HAVE_LIBZ
-HUGE_VAL_SANITY
-MMAP_FILE
-SHLIBEXT
-SHLIBPATH_VAR
-LLVM_PREFIX
-LLVM_BINDIR
-LLVM_LIBDIR
-LLVM_DATADIR
-LLVM_DOCSDIR
-LLVM_ETCDIR
-LLVM_INCLUDEDIR
-LLVM_INFODIR
-LLVM_MANDIR
-LLVM_CONFIGTIME
-BINDINGS_TO_BUILD
-ALL_BINDINGS
-OCAML_LIBDIR
-ENABLE_VISIBILITY_INLINES_HIDDEN
-RPATH
-RDYNAMIC
-program_prefix
-LIBOBJS
-LTLIBOBJS'
-ac_subst_files=''
- ac_precious_vars='build_alias
-host_alias
-target_alias
-CC
-CFLAGS
-LDFLAGS
-CPPFLAGS
-CXX
-CXXFLAGS
-CCC
-CPP
-CXXCPP'
-ac_subdirs_all='projects/llvm-gcc
-projects/test-suite
-projects/llvm-test
-projects/poolalloc
-projects/llvm-poolalloc
-projects/sample
-projects/privbracket
-projects/llvm-stacker
-projects/llvm-reopt
-projects/llvm-java
-projects/llvm-tv
-projects/safecode
-projects/llvm-kernel
-tools/polly'
-
-# Initialize some variables set by options.
-ac_init_help=
-ac_init_version=false
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-cache_file=/dev/null
-exec_prefix=NONE
-no_create=
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-srcdir=
-verbose=
-x_includes=NONE
-x_libraries=NONE
-
-# Installation directory options.
-# These are left unexpanded so users can "make install exec_prefix=/foo"
-# and all the variables that are supposed to be based on exec_prefix
-# by default will actually change.
-# Use braces instead of parens because sh, perl, etc. also accept them.
-# (The list follows the same order as the GNU Coding Standards.)
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datarootdir='${prefix}/share'
-datadir='${datarootdir}'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
-infodir='${datarootdir}/info'
-htmldir='${docdir}'
-dvidir='${docdir}'
-pdfdir='${docdir}'
-psdir='${docdir}'
-libdir='${exec_prefix}/lib'
-localedir='${datarootdir}/locale'
-mandir='${datarootdir}/man'
-
-ac_prev=
-ac_dashdash=
-for ac_option
-do
- # If the previous option needs an argument, assign it.
- if test -n "$ac_prev"; then
- eval $ac_prev=\$ac_option
- ac_prev=
- continue
- fi
-
- case $ac_option in
- *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
- *) ac_optarg=yes ;;
- esac
-
- # Accept the important Cygnus configure options, so we can diagnose typos.
-
- case $ac_dashdash$ac_option in
- --)
- ac_dashdash=yes ;;
-
- -bindir | --bindir | --bindi | --bind | --bin | --bi)
- ac_prev=bindir ;;
- -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
- bindir=$ac_optarg ;;
-
- -build | --build | --buil | --bui | --bu)
- ac_prev=build_alias ;;
- -build=* | --build=* | --buil=* | --bui=* | --bu=*)
- build_alias=$ac_optarg ;;
-
- -cache-file | --cache-file | --cache-fil | --cache-fi \
- | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
- ac_prev=cache_file ;;
- -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
- | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
- cache_file=$ac_optarg ;;
-
- --config-cache | -C)
- cache_file=config.cache ;;
-
- -datadir | --datadir | --datadi | --datad)
- ac_prev=datadir ;;
- -datadir=* | --datadir=* | --datadi=* | --datad=*)
- datadir=$ac_optarg ;;
-
- -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
- | --dataroo | --dataro | --datar)
- ac_prev=datarootdir ;;
- -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
- | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
- datarootdir=$ac_optarg ;;
-
- -disable-* | --disable-*)
- ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
- # Reject names that are not valid shell variable names.
- expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
- { echo "$as_me: error: invalid feature name: $ac_feature" >&2
- { (exit 1); exit 1; }; }
- ac_feature=`echo $ac_feature | sed 's/-/_/g'`
- eval enable_$ac_feature=no ;;
-
- -docdir | --docdir | --docdi | --doc | --do)
- ac_prev=docdir ;;
- -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
- docdir=$ac_optarg ;;
-
- -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
- ac_prev=dvidir ;;
- -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
- dvidir=$ac_optarg ;;
-
- -enable-* | --enable-*)
- ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
- # Reject names that are not valid shell variable names.
- expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
- { echo "$as_me: error: invalid feature name: $ac_feature" >&2
- { (exit 1); exit 1; }; }
- ac_feature=`echo $ac_feature | sed 's/-/_/g'`
- eval enable_$ac_feature=\$ac_optarg ;;
-
- -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
- | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
- | --exec | --exe | --ex)
- ac_prev=exec_prefix ;;
- -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
- | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
- | --exec=* | --exe=* | --ex=*)
- exec_prefix=$ac_optarg ;;
-
- -gas | --gas | --ga | --g)
- # Obsolete; use --with-gas.
- with_gas=yes ;;
-
- -help | --help | --hel | --he | -h)
- ac_init_help=long ;;
- -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
- ac_init_help=recursive ;;
- -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
- ac_init_help=short ;;
-
- -host | --host | --hos | --ho)
- ac_prev=host_alias ;;
- -host=* | --host=* | --hos=* | --ho=*)
- host_alias=$ac_optarg ;;
-
- -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
- ac_prev=htmldir ;;
- -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
- | --ht=*)
- htmldir=$ac_optarg ;;
-
- -includedir | --includedir | --includedi | --included | --include \
- | --includ | --inclu | --incl | --inc)
- ac_prev=includedir ;;
- -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
- | --includ=* | --inclu=* | --incl=* | --inc=*)
- includedir=$ac_optarg ;;
-
- -infodir | --infodir | --infodi | --infod | --info | --inf)
- ac_prev=infodir ;;
- -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
- infodir=$ac_optarg ;;
-
- -libdir | --libdir | --libdi | --libd)
- ac_prev=libdir ;;
- -libdir=* | --libdir=* | --libdi=* | --libd=*)
- libdir=$ac_optarg ;;
-
- -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
- | --libexe | --libex | --libe)
- ac_prev=libexecdir ;;
- -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
- | --libexe=* | --libex=* | --libe=*)
- libexecdir=$ac_optarg ;;
-
- -localedir | --localedir | --localedi | --localed | --locale)
- ac_prev=localedir ;;
- -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
- localedir=$ac_optarg ;;
-
- -localstatedir | --localstatedir | --localstatedi | --localstated \
- | --localstate | --localstat | --localsta | --localst | --locals)
- ac_prev=localstatedir ;;
- -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
- | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
- localstatedir=$ac_optarg ;;
-
- -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
- ac_prev=mandir ;;
- -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
- mandir=$ac_optarg ;;
-
- -nfp | --nfp | --nf)
- # Obsolete; use --without-fp.
- with_fp=no ;;
-
- -no-create | --no-create | --no-creat | --no-crea | --no-cre \
- | --no-cr | --no-c | -n)
- no_create=yes ;;
-
- -no-recursion | --no-recursion | --no-recursio | --no-recursi \
- | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
- no_recursion=yes ;;
-
- -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
- | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
- | --oldin | --oldi | --old | --ol | --o)
- ac_prev=oldincludedir ;;
- -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
- | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
- | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
- oldincludedir=$ac_optarg ;;
-
- -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
- ac_prev=prefix ;;
- -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
- prefix=$ac_optarg ;;
-
- -program-prefix | --program-prefix | --program-prefi | --program-pref \
- | --program-pre | --program-pr | --program-p)
- ac_prev=program_prefix ;;
- -program-prefix=* | --program-prefix=* | --program-prefi=* \
- | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
- program_prefix=$ac_optarg ;;
-
- -program-suffix | --program-suffix | --program-suffi | --program-suff \
- | --program-suf | --program-su | --program-s)
- ac_prev=program_suffix ;;
- -program-suffix=* | --program-suffix=* | --program-suffi=* \
- | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
- program_suffix=$ac_optarg ;;
-
- -program-transform-name | --program-transform-name \
- | --program-transform-nam | --program-transform-na \
- | --program-transform-n | --program-transform- \
- | --program-transform | --program-transfor \
- | --program-transfo | --program-transf \
- | --program-trans | --program-tran \
- | --progr-tra | --program-tr | --program-t)
- ac_prev=program_transform_name ;;
- -program-transform-name=* | --program-transform-name=* \
- | --program-transform-nam=* | --program-transform-na=* \
- | --program-transform-n=* | --program-transform-=* \
- | --program-transform=* | --program-transfor=* \
- | --program-transfo=* | --program-transf=* \
- | --program-trans=* | --program-tran=* \
- | --progr-tra=* | --program-tr=* | --program-t=*)
- program_transform_name=$ac_optarg ;;
-
- -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
- ac_prev=pdfdir ;;
- -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
- pdfdir=$ac_optarg ;;
-
- -psdir | --psdir | --psdi | --psd | --ps)
- ac_prev=psdir ;;
- -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
- psdir=$ac_optarg ;;
-
- -q | -quiet | --quiet | --quie | --qui | --qu | --q \
- | -silent | --silent | --silen | --sile | --sil)
- silent=yes ;;
-
- -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
- ac_prev=sbindir ;;
- -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
- | --sbi=* | --sb=*)
- sbindir=$ac_optarg ;;
-
- -sharedstatedir | --sharedstatedir | --sharedstatedi \
- | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
- | --sharedst | --shareds | --shared | --share | --shar \
- | --sha | --sh)
- ac_prev=sharedstatedir ;;
- -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
- | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
- | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
- | --sha=* | --sh=*)
- sharedstatedir=$ac_optarg ;;
-
- -site | --site | --sit)
- ac_prev=site ;;
- -site=* | --site=* | --sit=*)
- site=$ac_optarg ;;
-
- -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
- ac_prev=srcdir ;;
- -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
- srcdir=$ac_optarg ;;
-
- -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
- | --syscon | --sysco | --sysc | --sys | --sy)
- ac_prev=sysconfdir ;;
- -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
- | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
- sysconfdir=$ac_optarg ;;
-
- -target | --target | --targe | --targ | --tar | --ta | --t)
- ac_prev=target_alias ;;
- -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
- target_alias=$ac_optarg ;;
-
- -v | -verbose | --verbose | --verbos | --verbo | --verb)
- verbose=yes ;;
-
- -version | --version | --versio | --versi | --vers | -V)
- ac_init_version=: ;;
-
- -with-* | --with-*)
- ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
- # Reject names that are not valid shell variable names.
- expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
- { echo "$as_me: error: invalid package name: $ac_package" >&2
- { (exit 1); exit 1; }; }
- ac_package=`echo $ac_package| sed 's/-/_/g'`
- eval with_$ac_package=\$ac_optarg ;;
-
- -without-* | --without-*)
- ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
- # Reject names that are not valid shell variable names.
- expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
- { echo "$as_me: error: invalid package name: $ac_package" >&2
- { (exit 1); exit 1; }; }
- ac_package=`echo $ac_package | sed 's/-/_/g'`
- eval with_$ac_package=no ;;
-
- --x)
- # Obsolete; use --with-x.
- with_x=yes ;;
-
- -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
- | --x-incl | --x-inc | --x-in | --x-i)
- ac_prev=x_includes ;;
- -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
- | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
- x_includes=$ac_optarg ;;
-
- -x-libraries | --x-libraries | --x-librarie | --x-librari \
- | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
- ac_prev=x_libraries ;;
- -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
- | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
- x_libraries=$ac_optarg ;;
-
- -*) { echo "$as_me: error: unrecognized option: $ac_option
-Try \`$0 --help' for more information." >&2
- { (exit 1); exit 1; }; }
- ;;
-
- *=*)
- ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
- # Reject names that are not valid shell variable names.
- expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
- { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
- { (exit 1); exit 1; }; }
- eval $ac_envvar=\$ac_optarg
- export $ac_envvar ;;
-
- *)
- # FIXME: should be removed in autoconf 3.0.
- echo "$as_me: WARNING: you should use --build, --host, --target" >&2
- expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
- echo "$as_me: WARNING: invalid host type: $ac_option" >&2
- : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
- ;;
-
- esac
-done
-
-if test -n "$ac_prev"; then
- ac_option=--`echo $ac_prev | sed 's/_/-/g'`
- { echo "$as_me: error: missing argument to $ac_option" >&2
- { (exit 1); exit 1; }; }
-fi
-
-# Be sure to have absolute directory names.
-for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \
- datadir sysconfdir sharedstatedir localstatedir includedir \
- oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
- libdir localedir mandir
-do
- eval ac_val=\$$ac_var
- case $ac_val in
- [\\/$]* | ?:[\\/]* ) continue;;
- NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
- esac
- { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
- { (exit 1); exit 1; }; }
-done
-
-# There might be people who depend on the old broken behavior: `$host'
-# used to hold the argument of --host etc.
-# FIXME: To remove some day.
-build=$build_alias
-host=$host_alias
-target=$target_alias
-
-# FIXME: To remove some day.
-if test "x$host_alias" != x; then
- if test "x$build_alias" = x; then
- cross_compiling=maybe
- echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
- If a cross compiler is detected then cross compile mode will be used." >&2
- elif test "x$build_alias" != "x$host_alias"; then
- cross_compiling=yes
- fi
-fi
-
-ac_tool_prefix=
-test -n "$host_alias" && ac_tool_prefix=$host_alias-
-
-test "$silent" = yes && exec 6>/dev/null
-
-
-ac_pwd=`pwd` && test -n "$ac_pwd" &&
-ac_ls_di=`ls -di .` &&
-ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
- { echo "$as_me: error: Working directory cannot be determined" >&2
- { (exit 1); exit 1; }; }
-test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
- { echo "$as_me: error: pwd does not report name of working directory" >&2
- { (exit 1); exit 1; }; }
-
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
- ac_srcdir_defaulted=yes
- # Try the directory containing this script, then the parent directory.
- ac_confdir=`$as_dirname -- "$0" ||
-$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$0" : 'X\(//\)[^/]' \| \
- X"$0" : 'X\(//\)$' \| \
- X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-echo X"$0" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- srcdir=$ac_confdir
- if test ! -r "$srcdir/$ac_unique_file"; then
- srcdir=..
- fi
-else
- ac_srcdir_defaulted=no
-fi
-if test ! -r "$srcdir/$ac_unique_file"; then
- test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
- { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
- { (exit 1); exit 1; }; }
-fi
-ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
-ac_abs_confdir=`(
- cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2
- { (exit 1); exit 1; }; }
- pwd)`
-# When building in place, set srcdir=.
-if test "$ac_abs_confdir" = "$ac_pwd"; then
- srcdir=.
-fi
-# Remove unnecessary trailing slashes from srcdir.
-# Double slashes in file names in object file debugging info
-# mess up M-x gdb in Emacs.
-case $srcdir in
-*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
-esac
-for ac_var in $ac_precious_vars; do
- eval ac_env_${ac_var}_set=\${${ac_var}+set}
- eval ac_env_${ac_var}_value=\$${ac_var}
- eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
- eval ac_cv_env_${ac_var}_value=\$${ac_var}
-done
-
-#
-# Report the --help message.
-#
-if test "$ac_init_help" = "long"; then
- # Omit some internal or obsolete options to make the list less imposing.
- # This message is too long to be a string in the A/UX 3.1 sh.
- cat <<_ACEOF
-\`configure' configures LLVM 3.3 to adapt to many kinds of systems.
-
-Usage: $0 [OPTION]... [VAR=VALUE]...
-
-To assign environment variables (e.g., CC, CFLAGS...), specify them as
-VAR=VALUE. See below for descriptions of some of the useful variables.
-
-Defaults for the options are specified in brackets.
-
-Configuration:
- -h, --help display this help and exit
- --help=short display options specific to this package
- --help=recursive display the short help of all the included packages
- -V, --version display version information and exit
- -q, --quiet, --silent do not print \`checking...' messages
- --cache-file=FILE cache test results in FILE [disabled]
- -C, --config-cache alias for \`--cache-file=config.cache'
- -n, --no-create do not create output files
- --srcdir=DIR find the sources in DIR [configure dir or \`..']
-
-Installation directories:
- --prefix=PREFIX install architecture-independent files in PREFIX
- [$ac_default_prefix]
- --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
- [PREFIX]
-
-By default, \`make install' will install all the files in
-\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
-an installation prefix other than \`$ac_default_prefix' using \`--prefix',
-for instance \`--prefix=\$HOME'.
-
-For better control, use the options below.
-
-Fine tuning of the installation directories:
- --bindir=DIR user executables [EPREFIX/bin]
- --sbindir=DIR system admin executables [EPREFIX/sbin]
- --libexecdir=DIR program executables [EPREFIX/libexec]
- --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
- --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
- --localstatedir=DIR modifiable single-machine data [PREFIX/var]
- --libdir=DIR object code libraries [EPREFIX/lib]
- --includedir=DIR C header files [PREFIX/include]
- --oldincludedir=DIR C header files for non-gcc [/usr/include]
- --datarootdir=DIR read-only arch.-independent data root [PREFIX/share]
- --datadir=DIR read-only architecture-independent data [DATAROOTDIR]
- --infodir=DIR info documentation [DATAROOTDIR/info]
- --localedir=DIR locale-dependent data [DATAROOTDIR/locale]
- --mandir=DIR man documentation [DATAROOTDIR/man]
- --docdir=DIR documentation root [DATAROOTDIR/doc/llvm]
- --htmldir=DIR html documentation [DOCDIR]
- --dvidir=DIR dvi documentation [DOCDIR]
- --pdfdir=DIR pdf documentation [DOCDIR]
- --psdir=DIR ps documentation [DOCDIR]
-_ACEOF
-
- cat <<\_ACEOF
-
-System types:
- --build=BUILD configure for building on BUILD [guessed]
- --host=HOST cross-compile to build programs to run on HOST [BUILD]
- --target=TARGET configure for building compilers for TARGET [HOST]
-_ACEOF
-fi
-
-if test -n "$ac_init_help"; then
- case $ac_init_help in
- short | recursive ) echo "Configuration of LLVM 3.3:";;
- esac
- cat <<\_ACEOF
-
-Optional Features:
- --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
- --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
- --enable-polly Use polly if available (default is YES)
- --enable-libcpp Use libc++ if available (default is NO)
- --enable-cxx11 Use c++11 if available (default is NO)
- --enable-clang-arcmt Enable building of clang ARCMT (default is YES)
- --enable-clang-static-analyzer
- Enable building of clang Static Analyzer (default is
- YES)
- --enable-clang-rewriter Enable building of clang rewriter (default is YES)
- --enable-optimized Compile with optimizations enabled (default is NO)
- --enable-profiling Compile with profiling enabled (default is NO)
- --enable-assertions Compile with assertion checks enabled (default is
- YES)
- --enable-werror Compile with -Werror enabled (default is NO)
- --enable-expensive-checks
- Compile with expensive debug checks enabled (default
- is NO)
- --enable-debug-runtime Build runtime libs with debug symbols (default is
- NO)
- --enable-debug-symbols Build compiler with debug symbols (default is NO if
- optimization is on and YES if it's off)
- --enable-keep-symbols Do not strip installed executables)
- --enable-jit Enable Just In Time Compiling (default is YES)
- --enable-docs Build documents (default is YES)
- --enable-doxygen Build doxygen documentation (default is NO)
- --enable-threads Use threads if available (default is YES)
- --enable-pthreads Use pthreads if available (default is YES)
- --enable-zlib Use zlib for compression/decompression if available
- (default is YES)
- --enable-pic Build LLVM with Position Independent Code (default
- is YES)
- --enable-shared Build a shared library and link tools against it
- (default is NO)
- --enable-embed-stdcxx Build a shared library with embedded libstdc++ for
- Win32 DLL (default is NO)
- --enable-timestamps Enable embedding timestamp information in build
- (default is YES)
- --enable-backtraces Enable embedding backtraces on crash (default is
- YES)
- --enable-targets Build specific host targets: all or
- target1,target2,... Valid targets are: host, x86,
- x86_64, sparc, powerpc, arm, aarch64, mips, hexagon,
- xcore, msp430, nvptx, systemz, and cpp (default=all)
- --enable-experimental-targets
- Build experimental host targets: disable or
- target1,target2,... (default=disable)
- --enable-bindings Build specific language bindings:
- all,auto,none,{binding-name} (default=auto)
- --enable-libffi Check for the presence of libffi (default is NO)
- --enable-ltdl-install install libltdl
-
-Optional Packages:
- --with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
- --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
- --with-optimize-option Select the compiler options to use for optimized
- builds
- --with-extra-options Specify additional options to compile LLVM with
- --with-extra-ld-options Specify additional options to link LLVM with
- --with-ocaml-libdir Specify install location for ocaml bindings (default
- is stdlib)
- --with-clang-srcdir Directory to the out-of-tree Clang source
- --with-clang-resource-dir
- Relative directory from the Clang binary for
- resource files
- --with-c-include-dirs Colon separated list of directories clang will
- search for headers
- --with-gcc-toolchain Directory where gcc is installed.
- --with-default-sysroot Add --sysroot=<path> to all compiler invocations.
- --with-binutils-include Specify path to binutils/include/ containing
- plugin-api.h file for gold plugin.
- --with-bug-report-url Specify the URL where bug reports should be
- submitted (default=http://llvm.org/bugs/)
- --with-internal-prefix Installation directory for internal files
- --with-python path to python
- --with-udis86=<path> Use udis86 external x86 disassembler library
- --with-oprofile=<prefix>
- Tell OProfile >= 0.9.4 how to symbolize JIT output
- --with-intel-jitevents Notify Intel JIT profiling API of generated code
-
-
-Some influential environment variables:
- CC C compiler command
- CFLAGS C compiler flags
- LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
- nonstandard directory <lib dir>
- CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I<include dir> if
- you have headers in a nonstandard directory <include dir>
- CXX C++ compiler command
- CXXFLAGS C++ compiler flags
- CPP C preprocessor
- CXXCPP C++ preprocessor
-
-Use these variables to override the choices made by `configure' or to help
-it to find libraries and programs with nonstandard names/locations.
-
-Report bugs to <http://llvm.org/bugs/>.
-_ACEOF
-ac_status=$?
-fi
-
-if test "$ac_init_help" = "recursive"; then
- # If there are subdirs, report their specific --help.
- for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
- test -d "$ac_dir" || continue
- ac_builddir=.
-
-case "$ac_dir" in
-.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
-*)
- ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
- # A ".." for each directory in $ac_dir_suffix.
- ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
- case $ac_top_builddir_sub in
- "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
- *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
- esac ;;
-esac
-ac_abs_top_builddir=$ac_pwd
-ac_abs_builddir=$ac_pwd$ac_dir_suffix
-# for backward compatibility:
-ac_top_builddir=$ac_top_build_prefix
-
-case $srcdir in
- .) # We are building in place.
- ac_srcdir=.
- ac_top_srcdir=$ac_top_builddir_sub
- ac_abs_top_srcdir=$ac_pwd ;;
- [\\/]* | ?:[\\/]* ) # Absolute name.
- ac_srcdir=$srcdir$ac_dir_suffix;
- ac_top_srcdir=$srcdir
- ac_abs_top_srcdir=$srcdir ;;
- *) # Relative name.
- ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
- ac_top_srcdir=$ac_top_build_prefix$srcdir
- ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
-esac
-ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
-
- cd "$ac_dir" || { ac_status=$?; continue; }
- # Check for guested configure.
- if test -f "$ac_srcdir/configure.gnu"; then
- echo &&
- $SHELL "$ac_srcdir/configure.gnu" --help=recursive
- elif test -f "$ac_srcdir/configure"; then
- echo &&
- $SHELL "$ac_srcdir/configure" --help=recursive
- else
- echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
- fi || ac_status=$?
- cd "$ac_pwd" || { ac_status=$?; break; }
- done
-fi
-
-test -n "$ac_init_help" && exit $ac_status
-if $ac_init_version; then
- cat <<\_ACEOF
-LLVM configure 3.3
-generated by GNU Autoconf 2.60
-
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
-This configure script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it.
-
-Copyright (c) 2003-2013 University of Illinois at Urbana-Champaign.
-_ACEOF
- exit
-fi
-cat >config.log <<_ACEOF
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-
-It was created by LLVM $as_me 3.3, which was
-generated by GNU Autoconf 2.60. Invocation command line was
-
- $ $0 $@
-
-_ACEOF
-exec 5>>config.log
-{
-cat <<_ASUNAME
-## --------- ##
-## Platform. ##
-## --------- ##
-
-hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
-uname -m = `(uname -m) 2>/dev/null || echo unknown`
-uname -r = `(uname -r) 2>/dev/null || echo unknown`
-uname -s = `(uname -s) 2>/dev/null || echo unknown`
-uname -v = `(uname -v) 2>/dev/null || echo unknown`
-
-/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
-/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
-
-/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
-/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
-/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
-/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown`
-/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
-/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
-/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
-
-_ASUNAME
-
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- echo "PATH: $as_dir"
-done
-IFS=$as_save_IFS
-
-} >&5
-
-cat >&5 <<_ACEOF
-
-
-## ----------- ##
-## Core tests. ##
-## ----------- ##
-
-_ACEOF
-
-
-# Keep a trace of the command line.
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Strip out --silent because we don't want to record it for future runs.
-# Also quote any args containing shell meta-characters.
-# Make two passes to allow for proper duplicate-argument suppression.
-ac_configure_args=
-ac_configure_args0=
-ac_configure_args1=
-ac_must_keep_next=false
-for ac_pass in 1 2
-do
- for ac_arg
- do
- case $ac_arg in
- -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
- -q | -quiet | --quiet | --quie | --qui | --qu | --q \
- | -silent | --silent | --silen | --sile | --sil)
- continue ;;
- *\'*)
- ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
- esac
- case $ac_pass in
- 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
- 2)
- ac_configure_args1="$ac_configure_args1 '$ac_arg'"
- if test $ac_must_keep_next = true; then
- ac_must_keep_next=false # Got value, back to normal.
- else
- case $ac_arg in
- *=* | --config-cache | -C | -disable-* | --disable-* \
- | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
- | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
- | -with-* | --with-* | -without-* | --without-* | --x)
- case "$ac_configure_args0 " in
- "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
- esac
- ;;
- -* ) ac_must_keep_next=true ;;
- esac
- fi
- ac_configure_args="$ac_configure_args '$ac_arg'"
- ;;
- esac
- done
-done
-$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; }
-$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; }
-
-# When interrupted or exit'd, cleanup temporary files, and complete
-# config.log. We remove comments because anyway the quotes in there
-# would cause problems or look ugly.
-# WARNING: Use '\'' to represent an apostrophe within the trap.
-# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
-trap 'exit_status=$?
- # Save into config.log some information that might help in debugging.
- {
- echo
-
- cat <<\_ASBOX
-## ---------------- ##
-## Cache variables. ##
-## ---------------- ##
-_ASBOX
- echo
- # The following way of writing the cache mishandles newlines in values,
-(
- for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
- eval ac_val=\$$ac_var
- case $ac_val in #(
- *${as_nl}*)
- case $ac_var in #(
- *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
-echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
- esac
- case $ac_var in #(
- _ | IFS | as_nl) ;; #(
- *) $as_unset $ac_var ;;
- esac ;;
- esac
- done
- (set) 2>&1 |
- case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
- *${as_nl}ac_space=\ *)
- sed -n \
- "s/'\''/'\''\\\\'\'''\''/g;
- s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
- ;; #(
- *)
- sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
- ;;
- esac |
- sort
-)
- echo
-
- cat <<\_ASBOX
-## ----------------- ##
-## Output variables. ##
-## ----------------- ##
-_ASBOX
- echo
- for ac_var in $ac_subst_vars
- do
- eval ac_val=\$$ac_var
- case $ac_val in
- *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
- esac
- echo "$ac_var='\''$ac_val'\''"
- done | sort
- echo
-
- if test -n "$ac_subst_files"; then
- cat <<\_ASBOX
-## ------------------- ##
-## File substitutions. ##
-## ------------------- ##
-_ASBOX
- echo
- for ac_var in $ac_subst_files
- do
- eval ac_val=\$$ac_var
- case $ac_val in
- *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
- esac
- echo "$ac_var='\''$ac_val'\''"
- done | sort
- echo
- fi
-
- if test -s confdefs.h; then
- cat <<\_ASBOX
-## ----------- ##
-## confdefs.h. ##
-## ----------- ##
-_ASBOX
- echo
- cat confdefs.h
- echo
- fi
- test "$ac_signal" != 0 &&
- echo "$as_me: caught signal $ac_signal"
- echo "$as_me: exit $exit_status"
- } >&5
- rm -f core *.core core.conftest.* &&
- rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
- exit $exit_status
-' 0
-for ac_signal in 1 2 13 15; do
- trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
-done
-ac_signal=0
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -f -r conftest* confdefs.h
-
-# Predefined preprocessor variables.
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_NAME "$PACKAGE_NAME"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_VERSION "$PACKAGE_VERSION"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_STRING "$PACKAGE_STRING"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
-_ACEOF
-
-
-# Let the site file select an alternate cache file if it wants to.
-# Prefer explicitly selected file to automatically selected ones.
-if test -n "$CONFIG_SITE"; then
- set x "$CONFIG_SITE"
-elif test "x$prefix" != xNONE; then
- set x "$prefix/share/config.site" "$prefix/etc/config.site"
-else
- set x "$ac_default_prefix/share/config.site" \
- "$ac_default_prefix/etc/config.site"
-fi
-shift
-for ac_site_file
-do
- if test -r "$ac_site_file"; then
- { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
-echo "$as_me: loading site script $ac_site_file" >&6;}
- sed 's/^/| /' "$ac_site_file" >&5
- . "$ac_site_file"
- fi
-done
-
-if test -r "$cache_file"; then
- # Some versions of bash will fail to source /dev/null (special
- # files actually), so we avoid doing that.
- if test -f "$cache_file"; then
- { echo "$as_me:$LINENO: loading cache $cache_file" >&5
-echo "$as_me: loading cache $cache_file" >&6;}
- case $cache_file in
- [\\/]* | ?:[\\/]* ) . "$cache_file";;
- *) . "./$cache_file";;
- esac
- fi
-else
- { echo "$as_me:$LINENO: creating cache $cache_file" >&5
-echo "$as_me: creating cache $cache_file" >&6;}
- >$cache_file
-fi
-
-# Check that the precious variables saved in the cache have kept the same
-# value.
-ac_cache_corrupted=false
-for ac_var in $ac_precious_vars; do
- eval ac_old_set=\$ac_cv_env_${ac_var}_set
- eval ac_new_set=\$ac_env_${ac_var}_set
- eval ac_old_val=\$ac_cv_env_${ac_var}_value
- eval ac_new_val=\$ac_env_${ac_var}_value
- case $ac_old_set,$ac_new_set in
- set,)
- { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
-echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
- ac_cache_corrupted=: ;;
- ,set)
- { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
-echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
- ac_cache_corrupted=: ;;
- ,);;
- *)
- if test "x$ac_old_val" != "x$ac_new_val"; then
- { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
-echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
- { echo "$as_me:$LINENO: former value: $ac_old_val" >&5
-echo "$as_me: former value: $ac_old_val" >&2;}
- { echo "$as_me:$LINENO: current value: $ac_new_val" >&5
-echo "$as_me: current value: $ac_new_val" >&2;}
- ac_cache_corrupted=:
- fi;;
- esac
- # Pass precious variables to config.status.
- if test "$ac_new_set" = set; then
- case $ac_new_val in
- *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
- *) ac_arg=$ac_var=$ac_new_val ;;
- esac
- case " $ac_configure_args " in
- *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
- *) ac_configure_args="$ac_configure_args '$ac_arg'" ;;
- esac
- fi
-done
-if $ac_cache_corrupted; then
- { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
-echo "$as_me: error: changes in the environment can compromise the build" >&2;}
- { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
-echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-
-cat >>confdefs.h <<\_ACEOF
-#define LLVM_VERSION_MAJOR 3
-_ACEOF
-
-
-cat >>confdefs.h <<\_ACEOF
-#define LLVM_VERSION_MINOR 3
-_ACEOF
-
-
-LLVM_COPYRIGHT="Copyright (c) 2003-2013 University of Illinois at Urbana-Champaign."
-
-
-
-
-
-
-
-ac_aux_dir=
-for ac_dir in autoconf "$srcdir"/autoconf; do
- if test -f "$ac_dir/install-sh"; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install-sh -c"
- break
- elif test -f "$ac_dir/install.sh"; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install.sh -c"
- break
- elif test -f "$ac_dir/shtool"; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/shtool install -c"
- break
- fi
-done
-if test -z "$ac_aux_dir"; then
- { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in autoconf \"$srcdir\"/autoconf" >&5
-echo "$as_me: error: cannot find install-sh or install.sh in autoconf \"$srcdir\"/autoconf" >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-# These three variables are undocumented and unsupported,
-# and are intended to be withdrawn in a future Autoconf release.
-# They can cause serious problems if a builder's source tree is in a directory
-# whose full name contains unusual characters.
-ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var.
-ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var.
-ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var.
-
-
-
-if test ${srcdir} != "." ; then
- if test -f ${srcdir}/include/llvm/Config/config.h ; then
- { { echo "$as_me:$LINENO: error: Already configured in ${srcdir}" >&5
-echo "$as_me: error: Already configured in ${srcdir}" >&2;}
- { (exit 1); exit 1; }; }
- fi
-fi
-
-${CFLAGS=}
-${CXXFLAGS=}
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-if test -n "$ac_tool_prefix"; then
- for ac_prog in clang llvm-gcc gcc
- do
- # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- { echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
- test -n "$CC" && break
- done
-fi
-if test -z "$CC"; then
- ac_ct_CC=$CC
- for ac_prog in clang llvm-gcc gcc
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$ac_ct_CC"; then
- ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_CC="$ac_prog"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
- { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
- test -n "$ac_ct_CC" && break
-done
-
- if test "x$ac_ct_CC" = x; then
- CC=""
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf at gnu.org." >&5
-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf at gnu.org." >&2;}
-ac_tool_warned=yes ;;
-esac
- CC=$ac_ct_CC
- fi
-fi
-
-
-test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH
-See \`config.log' for more details." >&5
-echo "$as_me: error: no acceptable C compiler found in \$PATH
-See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
-
-# Provide some information about the compiler.
-echo "$as_me:$LINENO: checking for C compiler version" >&5
-ac_compiler=`set X $ac_compile; echo $2`
-{ (ac_try="$ac_compiler --version >&5"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compiler --version >&5") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
-{ (ac_try="$ac_compiler -v >&5"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compiler -v >&5") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
-{ (ac_try="$ac_compiler -V >&5"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compiler -V >&5") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
-
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files a.out a.exe b.out"
-# Try to create an executable without -o first, disregard a.out.
-# It will help us diagnose broken compilers, and finding out an intuition
-# of exeext.
-{ echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
-echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6; }
-ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
-#
-# List of possible output files, starting from the most likely.
-# The algorithm is not robust to junk in `.', hence go to wildcards (a.*)
-# only as a last resort. b.out is created by i960 compilers.
-ac_files='a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out'
-#
-# The IRIX 6 linker writes into existing files which may not be
-# executable, retaining their permissions. Remove them first so a
-# subsequent execution test works.
-ac_rmfiles=
-for ac_file in $ac_files
-do
- case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;;
- * ) ac_rmfiles="$ac_rmfiles $ac_file";;
- esac
-done
-rm -f $ac_rmfiles
-
-if { (ac_try="$ac_link_default"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link_default") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
- # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
-# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
-# in a Makefile. We should not override ac_cv_exeext if it was cached,
-# so that the user can short-circuit this test for compilers unknown to
-# Autoconf.
-for ac_file in $ac_files
-do
- test -f "$ac_file" || continue
- case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj )
- ;;
- [ab].out )
- # We found the default executable, but exeext='' is most
- # certainly right.
- break;;
- *.* )
- if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
- then :; else
- ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
- fi
- # We set ac_cv_exeext here because the later test for it is not
- # safe: cross compilers may not add the suffix if given an `-o'
- # argument, so we may need to know it at that point already.
- # Even if this section looks crufty: it has the advantage of
- # actually working.
- break;;
- * )
- break;;
- esac
-done
-test "$ac_cv_exeext" = no && ac_cv_exeext=
-
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-{ { echo "$as_me:$LINENO: error: C compiler cannot create executables
-See \`config.log' for more details." >&5
-echo "$as_me: error: C compiler cannot create executables
-See \`config.log' for more details." >&2;}
- { (exit 77); exit 77; }; }
-fi
-
-ac_exeext=$ac_cv_exeext
-{ echo "$as_me:$LINENO: result: $ac_file" >&5
-echo "${ECHO_T}$ac_file" >&6; }
-
-# Check that the compiler produces executables we can run. If not, either
-# the compiler is broken, or we cross compile.
-{ echo "$as_me:$LINENO: checking whether the C compiler works" >&5
-echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6; }
-# FIXME: These cross compiler hacks should be removed for Autoconf 3.0
-# If not cross compiling, check that we can run a simple program.
-if test "$cross_compiling" != yes; then
- if { ac_try='./$ac_file'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- cross_compiling=no
- else
- if test "$cross_compiling" = maybe; then
- cross_compiling=yes
- else
- { { echo "$as_me:$LINENO: error: cannot run C compiled programs.
-If you meant to cross compile, use \`--host'.
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot run C compiled programs.
-If you meant to cross compile, use \`--host'.
-See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
- fi
- fi
-fi
-{ echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6; }
-
-rm -f a.out a.exe conftest$ac_cv_exeext b.out
-ac_clean_files=$ac_clean_files_save
-# Check that the compiler produces executables we can run. If not, either
-# the compiler is broken, or we cross compile.
-{ echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
-echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6; }
-{ echo "$as_me:$LINENO: result: $cross_compiling" >&5
-echo "${ECHO_T}$cross_compiling" >&6; }
-
-{ echo "$as_me:$LINENO: checking for suffix of executables" >&5
-echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6; }
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
- # If both `conftest.exe' and `conftest' are `present' (well, observable)
-# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will
-# work properly (i.e., refer to `conftest.exe'), while it won't with
-# `rm'.
-for ac_file in conftest.exe conftest conftest.*; do
- test -f "$ac_file" || continue
- case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;;
- *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
- break;;
- * ) break;;
- esac
-done
-else
- { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute suffix of executables: cannot compile and link
-See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-rm -f conftest$ac_cv_exeext
-{ echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
-echo "${ECHO_T}$ac_cv_exeext" >&6; }
-
-rm -f conftest.$ac_ext
-EXEEXT=$ac_cv_exeext
-ac_exeext=$EXEEXT
-{ echo "$as_me:$LINENO: checking for suffix of object files" >&5
-echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6; }
-if test "${ac_cv_objext+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.o conftest.obj
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
- for ac_file in conftest.o conftest.obj conftest.*; do
- test -f "$ac_file" || continue;
- case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf ) ;;
- *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
- break;;
- esac
-done
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute suffix of object files: cannot compile
-See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-rm -f conftest.$ac_cv_objext conftest.$ac_ext
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
-echo "${ECHO_T}$ac_cv_objext" >&6; }
-OBJEXT=$ac_cv_objext
-ac_objext=$OBJEXT
-{ echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
-echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6; }
-if test "${ac_cv_c_compiler_gnu+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-#ifndef __GNUC__
- choke me
-#endif
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_compiler_gnu=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_compiler_gnu=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-ac_cv_c_compiler_gnu=$ac_compiler_gnu
-
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
-echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; }
-GCC=`test $ac_compiler_gnu = yes && echo yes`
-ac_test_CFLAGS=${CFLAGS+set}
-ac_save_CFLAGS=$CFLAGS
-{ echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
-echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; }
-if test "${ac_cv_prog_cc_g+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_save_c_werror_flag=$ac_c_werror_flag
- ac_c_werror_flag=yes
- ac_cv_prog_cc_g=no
- CFLAGS="-g"
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_prog_cc_g=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- CFLAGS=""
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- :
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_c_werror_flag=$ac_save_c_werror_flag
- CFLAGS="-g"
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_prog_cc_g=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- ac_c_werror_flag=$ac_save_c_werror_flag
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
-echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; }
-if test "$ac_test_CFLAGS" = set; then
- CFLAGS=$ac_save_CFLAGS
-elif test $ac_cv_prog_cc_g = yes; then
- if test "$GCC" = yes; then
- CFLAGS="-g -O2"
- else
- CFLAGS="-g"
- fi
-else
- if test "$GCC" = yes; then
- CFLAGS="-O2"
- else
- CFLAGS=
- fi
-fi
-{ echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5
-echo $ECHO_N "checking for $CC option to accept ISO C89... $ECHO_C" >&6; }
-if test "${ac_cv_prog_cc_c89+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_cv_prog_cc_c89=no
-ac_save_CC=$CC
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <stdarg.h>
-#include <stdio.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
-struct buf { int x; };
-FILE * (*rcsopen) (struct buf *, struct stat *, int);
-static char *e (p, i)
- char **p;
- int i;
-{
- return p[i];
-}
-static char *f (char * (*g) (char **, int), char **p, ...)
-{
- char *s;
- va_list v;
- va_start (v,p);
- s = g (p, va_arg (v,int));
- va_end (v);
- return s;
-}
-
-/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
- function prototypes and stuff, but not '\xHH' hex character constants.
- These don't provoke an error unfortunately, instead are silently treated
- as 'x'. The following induces an error, until -std is added to get
- proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
- array size at least. It's necessary to write '\x00'==0 to get something
- that's true only with -std. */
-int osf4_cc_array ['\x00' == 0 ? 1 : -1];
-
-/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
- inside strings and character constants. */
-#define FOO(x) 'x'
-int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
-
-int test (int i, double x);
-struct s1 {int (*f) (int a);};
-struct s2 {int (*f) (double a);};
-int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
-int argc;
-char **argv;
-int
-main ()
-{
-return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
- ;
- return 0;
-}
-_ACEOF
-for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
- -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
-do
- CC="$ac_save_CC $ac_arg"
- rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_prog_cc_c89=$ac_arg
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext
- test "x$ac_cv_prog_cc_c89" != "xno" && break
-done
-rm -f conftest.$ac_ext
-CC=$ac_save_CC
-
-fi
-# AC_CACHE_VAL
-case "x$ac_cv_prog_cc_c89" in
- x)
- { echo "$as_me:$LINENO: result: none needed" >&5
-echo "${ECHO_T}none needed" >&6; } ;;
- xno)
- { echo "$as_me:$LINENO: result: unsupported" >&5
-echo "${ECHO_T}unsupported" >&6; } ;;
- *)
- CC="$CC $ac_cv_prog_cc_c89"
- { echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5
-echo "${ECHO_T}$ac_cv_prog_cc_c89" >&6; } ;;
-esac
-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-if test -z "$CXX"; then
- if test -n "$CCC"; then
- CXX=$CCC
- else
- if test -n "$ac_tool_prefix"; then
- for ac_prog in clang++ llvm-g++ g++
- do
- # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_CXX+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$CXX"; then
- ac_cv_prog_CXX="$CXX" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_CXX="$ac_tool_prefix$ac_prog"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-CXX=$ac_cv_prog_CXX
-if test -n "$CXX"; then
- { echo "$as_me:$LINENO: result: $CXX" >&5
-echo "${ECHO_T}$CXX" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
- test -n "$CXX" && break
- done
-fi
-if test -z "$CXX"; then
- ac_ct_CXX=$CXX
- for ac_prog in clang++ llvm-g++ g++
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$ac_ct_CXX"; then
- ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_CXX="$ac_prog"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_CXX=$ac_cv_prog_ac_ct_CXX
-if test -n "$ac_ct_CXX"; then
- { echo "$as_me:$LINENO: result: $ac_ct_CXX" >&5
-echo "${ECHO_T}$ac_ct_CXX" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
- test -n "$ac_ct_CXX" && break
-done
-
- if test "x$ac_ct_CXX" = x; then
- CXX="g++"
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf at gnu.org." >&5
-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf at gnu.org." >&2;}
-ac_tool_warned=yes ;;
-esac
- CXX=$ac_ct_CXX
- fi
-fi
-
- fi
-fi
-# Provide some information about the compiler.
-echo "$as_me:$LINENO: checking for C++ compiler version" >&5
-ac_compiler=`set X $ac_compile; echo $2`
-{ (ac_try="$ac_compiler --version >&5"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compiler --version >&5") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
-{ (ac_try="$ac_compiler -v >&5"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compiler -v >&5") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
-{ (ac_try="$ac_compiler -V >&5"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compiler -V >&5") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
-
-{ echo "$as_me:$LINENO: checking whether we are using the GNU C++ compiler" >&5
-echo $ECHO_N "checking whether we are using the GNU C++ compiler... $ECHO_C" >&6; }
-if test "${ac_cv_cxx_compiler_gnu+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-#ifndef __GNUC__
- choke me
-#endif
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_compiler_gnu=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_compiler_gnu=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-ac_cv_cxx_compiler_gnu=$ac_compiler_gnu
-
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_cxx_compiler_gnu" >&5
-echo "${ECHO_T}$ac_cv_cxx_compiler_gnu" >&6; }
-GXX=`test $ac_compiler_gnu = yes && echo yes`
-ac_test_CXXFLAGS=${CXXFLAGS+set}
-ac_save_CXXFLAGS=$CXXFLAGS
-{ echo "$as_me:$LINENO: checking whether $CXX accepts -g" >&5
-echo $ECHO_N "checking whether $CXX accepts -g... $ECHO_C" >&6; }
-if test "${ac_cv_prog_cxx_g+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_save_cxx_werror_flag=$ac_cxx_werror_flag
- ac_cxx_werror_flag=yes
- ac_cv_prog_cxx_g=no
- CXXFLAGS="-g"
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_prog_cxx_g=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- CXXFLAGS=""
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- :
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cxx_werror_flag=$ac_save_cxx_werror_flag
- CXXFLAGS="-g"
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_prog_cxx_g=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- ac_cxx_werror_flag=$ac_save_cxx_werror_flag
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_prog_cxx_g" >&5
-echo "${ECHO_T}$ac_cv_prog_cxx_g" >&6; }
-if test "$ac_test_CXXFLAGS" = set; then
- CXXFLAGS=$ac_save_CXXFLAGS
-elif test $ac_cv_prog_cxx_g = yes; then
- if test "$GXX" = yes; then
- CXXFLAGS="-g -O2"
- else
- CXXFLAGS="-g"
- fi
-else
- if test "$GXX" = yes; then
- CXXFLAGS="-O2"
- else
- CXXFLAGS=
- fi
-fi
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-{ echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
-echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6; }
-# On Suns, sometimes $CPP names a directory.
-if test -n "$CPP" && test -d "$CPP"; then
- CPP=
-fi
-if test -z "$CPP"; then
- if test "${ac_cv_prog_CPP+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- # Double quotes because CPP needs to be expanded
- for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
- do
- ac_preproc_ok=false
-for ac_c_preproc_warn_flag in '' yes
-do
- # Use a header file that comes with gcc, so configuring glibc
- # with a fresh cross-compiler works.
- # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- # <limits.h> exists even on freestanding compilers.
- # On the NeXT, cc -E runs the code through the compiler's parser,
- # not just through cpp. "Syntax error" is here to catch this case.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
- Syntax error
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
- :
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- # Broken: fails on valid input.
-continue
-fi
-
-rm -f conftest.err conftest.$ac_ext
-
- # OK, works on sane cases. Now check whether nonexistent headers
- # can be detected and how.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <ac_nonexistent.h>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
- # Broken: success on invalid input.
-continue
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- # Passes both tests.
-ac_preproc_ok=:
-break
-fi
-
-rm -f conftest.err conftest.$ac_ext
-
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then
- break
-fi
-
- done
- ac_cv_prog_CPP=$CPP
-
-fi
- CPP=$ac_cv_prog_CPP
-else
- ac_cv_prog_CPP=$CPP
-fi
-{ echo "$as_me:$LINENO: result: $CPP" >&5
-echo "${ECHO_T}$CPP" >&6; }
-ac_preproc_ok=false
-for ac_c_preproc_warn_flag in '' yes
-do
- # Use a header file that comes with gcc, so configuring glibc
- # with a fresh cross-compiler works.
- # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- # <limits.h> exists even on freestanding compilers.
- # On the NeXT, cc -E runs the code through the compiler's parser,
- # not just through cpp. "Syntax error" is here to catch this case.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
- Syntax error
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
- :
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- # Broken: fails on valid input.
-continue
-fi
-
-rm -f conftest.err conftest.$ac_ext
-
- # OK, works on sane cases. Now check whether nonexistent headers
- # can be detected and how.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <ac_nonexistent.h>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
- # Broken: success on invalid input.
-continue
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- # Passes both tests.
-ac_preproc_ok=:
-break
-fi
-
-rm -f conftest.err conftest.$ac_ext
-
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then
- :
-else
- { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check
-See \`config.log' for more details." >&5
-echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check
-See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-if test "$CXX" = "clang++" ; then
- { echo "$as_me:$LINENO: checking whether clang works" >&5
-echo $ECHO_N "checking whether clang works... $ECHO_C" >&6; }
- ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
-
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <limits>
-#if __has_include (<cxxabi.h>)
-#include <cxxabi.h>
-#endif
-#if __has_include (<unwind.h>)
-#include <unwind.h>
-#endif
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
-
- { echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6; }
-
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
- { { echo "$as_me:$LINENO: error: Selected compiler could not find or parse C++ standard library headers. Rerun with CC=c-compiler CXX=c++-compiler ./configure ..." >&5
-echo "$as_me: error: Selected compiler could not find or parse C++ standard library headers. Rerun with CC=c-compiler CXX=c++-compiler ./configure ..." >&2;}
- { (exit 1); exit 1; }; }
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-fi
-
-
-
-if test -d ${srcdir}/projects/llvm-gcc ; then
- subdirs="$subdirs projects/llvm-gcc"
-
-fi
-
-if test -d ${srcdir}/projects/test-suite ; then
- subdirs="$subdirs projects/test-suite"
-
-fi
-
-if test -d ${srcdir}/projects/llvm-test ; then
- subdirs="$subdirs projects/llvm-test"
-
-fi
-
-if test -d ${srcdir}/projects/poolalloc ; then
- subdirs="$subdirs projects/poolalloc"
-
-fi
-
-if test -d ${srcdir}/projects/llvm-poolalloc ; then
- subdirs="$subdirs projects/llvm-poolalloc"
-
-fi
-
-for i in `ls ${srcdir}/projects`
-do
- if test -d ${srcdir}/projects/${i} ; then
- case ${i} in
- sample) subdirs="$subdirs projects/sample"
- ;;
- privbracket) subdirs="$subdirs projects/privbracket"
- ;;
- llvm-stacker) subdirs="$subdirs projects/llvm-stacker"
- ;;
- llvm-reopt) subdirs="$subdirs projects/llvm-reopt"
-;;
- llvm-java) subdirs="$subdirs projects/llvm-java"
- ;;
- llvm-tv) subdirs="$subdirs projects/llvm-tv"
- ;;
- safecode) subdirs="$subdirs projects/safecode"
- ;;
- llvm-kernel) subdirs="$subdirs projects/llvm-kernel"
- ;;
- compiler-rt) ;;
- llvm-gcc) ;;
- test-suite) ;;
- llvm-test) ;;
- poolalloc) ;;
- llvm-poolalloc) ;;
- *)
- { echo "$as_me:$LINENO: WARNING: Unknown project (${i}) won't be configured automatically" >&5
-echo "$as_me: WARNING: Unknown project (${i}) won't be configured automatically" >&2;}
- ;;
- esac
- fi
-done
-
-# Check whether --enable-polly was given.
-if test "${enable_polly+set}" = set; then
- enableval=$enable_polly;
-else
- enableval=default
-fi
-
-case "$enableval" in
- yes) ENABLE_POLLY=1
- ;;
- no) ENABLE_POLLY=0
- ;;
- default) ENABLE_POLLY=1
- ;;
- *) { { echo "$as_me:$LINENO: error: Invalid setting for --enable-polly. Use \"yes\" or \"no\"" >&5
-echo "$as_me: error: Invalid setting for --enable-polly. Use \"yes\" or \"no\"" >&2;}
- { (exit 1); exit 1; }; } ;;
-esac
-
-
-if (test -d ${srcdir}/tools/polly) && (test $ENABLE_POLLY -eq 1) ; then
- LLVM_HAS_POLLY=1
-
- subdirs="$subdirs tools/polly"
-
-fi
-
-
-# Make sure we can run config.sub.
-$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
- { { echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5
-echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;}
- { (exit 1); exit 1; }; }
-
-{ echo "$as_me:$LINENO: checking build system type" >&5
-echo $ECHO_N "checking build system type... $ECHO_C" >&6; }
-if test "${ac_cv_build+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_build_alias=$build_alias
-test "x$ac_build_alias" = x &&
- ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
-test "x$ac_build_alias" = x &&
- { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5
-echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
- { (exit 1); exit 1; }; }
-ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
- { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5
-echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;}
- { (exit 1); exit 1; }; }
-
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_build" >&5
-echo "${ECHO_T}$ac_cv_build" >&6; }
-case $ac_cv_build in
-*-*-*) ;;
-*) { { echo "$as_me:$LINENO: error: invalid value of canonical build" >&5
-echo "$as_me: error: invalid value of canonical build" >&2;}
- { (exit 1); exit 1; }; };;
-esac
-build=$ac_cv_build
-ac_save_IFS=$IFS; IFS='-'
-set x $ac_cv_build
-shift
-build_cpu=$1
-build_vendor=$2
-shift; shift
-# Remember, the first character of IFS is used to create $*,
-# except with old shells:
-build_os=$*
-IFS=$ac_save_IFS
-case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
-
-
-{ echo "$as_me:$LINENO: checking host system type" >&5
-echo $ECHO_N "checking host system type... $ECHO_C" >&6; }
-if test "${ac_cv_host+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test "x$host_alias" = x; then
- ac_cv_host=$ac_cv_build
-else
- ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
- { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5
-echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_host" >&5
-echo "${ECHO_T}$ac_cv_host" >&6; }
-case $ac_cv_host in
-*-*-*) ;;
-*) { { echo "$as_me:$LINENO: error: invalid value of canonical host" >&5
-echo "$as_me: error: invalid value of canonical host" >&2;}
- { (exit 1); exit 1; }; };;
-esac
-host=$ac_cv_host
-ac_save_IFS=$IFS; IFS='-'
-set x $ac_cv_host
-shift
-host_cpu=$1
-host_vendor=$2
-shift; shift
-# Remember, the first character of IFS is used to create $*,
-# except with old shells:
-host_os=$*
-IFS=$ac_save_IFS
-case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
-
-
-{ echo "$as_me:$LINENO: checking target system type" >&5
-echo $ECHO_N "checking target system type... $ECHO_C" >&6; }
-if test "${ac_cv_target+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test "x$target_alias" = x; then
- ac_cv_target=$ac_cv_host
-else
- ac_cv_target=`$SHELL "$ac_aux_dir/config.sub" $target_alias` ||
- { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $target_alias failed" >&5
-echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $target_alias failed" >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_target" >&5
-echo "${ECHO_T}$ac_cv_target" >&6; }
-case $ac_cv_target in
-*-*-*) ;;
-*) { { echo "$as_me:$LINENO: error: invalid value of canonical target" >&5
-echo "$as_me: error: invalid value of canonical target" >&2;}
- { (exit 1); exit 1; }; };;
-esac
-target=$ac_cv_target
-ac_save_IFS=$IFS; IFS='-'
-set x $ac_cv_target
-shift
-target_cpu=$1
-target_vendor=$2
-shift; shift
-# Remember, the first character of IFS is used to create $*,
-# except with old shells:
-target_os=$*
-IFS=$ac_save_IFS
-case $target_os in *\ *) target_os=`echo "$target_os" | sed 's/ /-/g'`;; esac
-
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-test -n "$target_alias" &&
- test "$program_prefix$program_suffix$program_transform_name" = \
- NONENONEs,x,x, &&
- program_prefix=${target_alias}-
-
-{ echo "$as_me:$LINENO: checking type of operating system we're going to host on" >&5
-echo $ECHO_N "checking type of operating system we're going to host on... $ECHO_C" >&6; }
-if test "${llvm_cv_os_type+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- case $host in
- *-*-aix*)
- llvm_cv_link_all_option="-Wl,--whole-archive"
- llvm_cv_no_link_all_option="-Wl,--no-whole-archive"
- llvm_cv_os_type="AIX"
- llvm_cv_platform_type="Unix" ;;
- *-*-irix*)
- llvm_cv_link_all_option="-Wl,--whole-archive"
- llvm_cv_no_link_all_option="-Wl,--no-whole-archive"
- llvm_cv_os_type="IRIX"
- llvm_cv_platform_type="Unix" ;;
- *-*-cygwin*)
- llvm_cv_link_all_option="-Wl,--whole-archive"
- llvm_cv_no_link_all_option="-Wl,--no-whole-archive"
- llvm_cv_os_type="Cygwin"
- llvm_cv_platform_type="Unix" ;;
- *-*-darwin*)
- llvm_cv_link_all_option="-Wl,-all_load"
- llvm_cv_no_link_all_option="-Wl,-noall_load"
- llvm_cv_os_type="Darwin"
- llvm_cv_platform_type="Unix" ;;
- *-*-minix*)
- llvm_cv_link_all_option="-Wl,-all_load"
- llvm_cv_no_link_all_option="-Wl,-noall_load"
- llvm_cv_os_type="Minix"
- llvm_cv_platform_type="Unix" ;;
- *-*-freebsd* | *-*-kfreebsd-gnu)
- llvm_cv_link_all_option="-Wl,--whole-archive"
- llvm_cv_no_link_all_option="-Wl,--no-whole-archive"
- llvm_cv_os_type="FreeBSD"
- llvm_cv_platform_type="Unix" ;;
- *-*-openbsd*)
- llvm_cv_link_all_option="-Wl,--whole-archive"
- llvm_cv_no_link_all_option="-Wl,--no-whole-archive"
- llvm_cv_os_type="OpenBSD"
- llvm_cv_platform_type="Unix" ;;
- *-*-netbsd*)
- llvm_cv_link_all_option="-Wl,--whole-archive"
- llvm_cv_no_link_all_option="-Wl,--no-whole-archive"
- llvm_cv_os_type="NetBSD"
- llvm_cv_platform_type="Unix" ;;
- *-*-dragonfly*)
- llvm_cv_link_all_option="-Wl,--whole-archive"
- llvm_cv_no_link_all_option="-Wl,--no-whole-archive"
- llvm_cv_os_type="DragonFly"
- llvm_cv_platform_type="Unix" ;;
- *-*-hpux*)
- llvm_cv_link_all_option="-Wl,--whole-archive"
- llvm_cv_no_link_all_option="-Wl,--no-whole-archive"
- llvm_cv_os_type="HP-UX"
- llvm_cv_platform_type="Unix" ;;
- *-*-interix*)
- llvm_cv_link_all_option="-Wl,--whole-archive"
- llvm_cv_no_link_all_option="-Wl,--no-whole-archive"
- llvm_cv_os_type="Interix"
- llvm_cv_platform_type="Unix" ;;
- *-*-linux*)
- llvm_cv_link_all_option="-Wl,--whole-archive"
- llvm_cv_no_link_all_option="-Wl,--no-whole-archive"
- llvm_cv_os_type="Linux"
- llvm_cv_platform_type="Unix" ;;
- *-*-gnu*)
- llvm_cv_link_all_option="-Wl,--whole-archive"
- llvm_cv_no_link_all_option="-Wl,--no-whole-archive"
- llvm_cv_os_type="GNU"
- llvm_cv_platform_type="Unix" ;;
- *-*-solaris*)
- llvm_cv_link_all_option="-Wl,-z,allextract"
- llvm_cv_no_link_all_option="-Wl,-z,defaultextract"
- llvm_cv_os_type="SunOS"
- llvm_cv_platform_type="Unix" ;;
- *-*-auroraux*)
- llvm_cv_link_all_option="-Wl,-z,allextract"
- llvm_cv_link_all_option="-Wl,-z,defaultextract"
- llvm_cv_os_type="AuroraUX"
- llvm_cv_platform_type="Unix" ;;
- *-*-win32*)
- llvm_cv_link_all_option="-Wl,--whole-archive"
- llvm_cv_no_link_all_option="-Wl,--no-whole-archive"
- llvm_cv_os_type="Win32"
- llvm_cv_platform_type="Win32" ;;
- *-*-mingw*)
- llvm_cv_link_all_option="-Wl,--whole-archive"
- llvm_cv_no_link_all_option="-Wl,--no-whole-archive"
- llvm_cv_os_type="MingW"
- llvm_cv_platform_type="Win32" ;;
- *-*-haiku*)
- llvm_cv_link_all_option="-Wl,--whole-archive"
- llvm_cv_no_link_all_option="-Wl,--no-whole-archive"
- llvm_cv_os_type="Haiku"
- llvm_cv_platform_type="Unix" ;;
- *-unknown-eabi*)
- llvm_cv_link_all_option="-Wl,--whole-archive"
- llvm_cv_no_link_all_option="-Wl,--no-whole-archive"
- llvm_cv_os_type="Freestanding"
- llvm_cv_platform_type="Unix" ;;
- *-unknown-elf*)
- llvm_cv_link_all_option="-Wl,--whole-archive"
- llvm_cv_no_link_all_option="-Wl,--no-whole-archive"
- llvm_cv_os_type="Freestanding"
- llvm_cv_platform_type="Unix" ;;
- *)
- llvm_cv_link_all_option=""
- llvm_cv_no_link_all_option=""
- llvm_cv_os_type="Unknown"
- llvm_cv_platform_type="Unknown" ;;
-esac
-fi
-{ echo "$as_me:$LINENO: result: $llvm_cv_os_type" >&5
-echo "${ECHO_T}$llvm_cv_os_type" >&6; }
-
-{ echo "$as_me:$LINENO: checking type of operating system we're going to target" >&5
-echo $ECHO_N "checking type of operating system we're going to target... $ECHO_C" >&6; }
-if test "${llvm_cv_target_os_type+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- case $target in
- *-*-aix*)
- llvm_cv_target_os_type="AIX" ;;
- *-*-irix*)
- llvm_cv_target_os_type="IRIX" ;;
- *-*-cygwin*)
- llvm_cv_target_os_type="Cygwin" ;;
- *-*-darwin*)
- llvm_cv_target_os_type="Darwin" ;;
- *-*-minix*)
- llvm_cv_target_os_type="Minix" ;;
- *-*-freebsd* | *-*-kfreebsd-gnu)
- llvm_cv_target_os_type="FreeBSD" ;;
- *-*-openbsd*)
- llvm_cv_target_os_type="OpenBSD" ;;
- *-*-netbsd*)
- llvm_cv_target_os_type="NetBSD" ;;
- *-*-dragonfly*)
- llvm_cv_target_os_type="DragonFly" ;;
- *-*-hpux*)
- llvm_cv_target_os_type="HP-UX" ;;
- *-*-interix*)
- llvm_cv_target_os_type="Interix" ;;
- *-*-linux*)
- llvm_cv_target_os_type="Linux" ;;
- *-*-gnu*)
- llvm_cv_target_os_type="GNU" ;;
- *-*-solaris*)
- llvm_cv_target_os_type="SunOS" ;;
- *-*-auroraux*)
- llvm_cv_target_os_type="AuroraUX" ;;
- *-*-win32*)
- llvm_cv_target_os_type="Win32" ;;
- *-*-mingw*)
- llvm_cv_target_os_type="MingW" ;;
- *-*-haiku*)
- llvm_cv_target_os_type="Haiku" ;;
- *-*-rtems*)
- llvm_cv_target_os_type="RTEMS" ;;
- *-*-nacl*)
- llvm_cv_target_os_type="NativeClient" ;;
- *-unknown-eabi*)
- llvm_cv_target_os_type="Freestanding" ;;
- *)
- llvm_cv_target_os_type="Unknown" ;;
-esac
-fi
-{ echo "$as_me:$LINENO: result: $llvm_cv_target_os_type" >&5
-echo "${ECHO_T}$llvm_cv_target_os_type" >&6; }
-
-if test "$llvm_cv_os_type" = "Unknown" ; then
- { { echo "$as_me:$LINENO: error: Operating system is unknown, configure can't continue" >&5
-echo "$as_me: error: Operating system is unknown, configure can't continue" >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-OS=$llvm_cv_os_type
-
-HOST_OS=$llvm_cv_os_type
-
-TARGET_OS=$llvm_cv_target_os_type
-
-
-LINKALL=$llvm_cv_link_all_option
-
-NOLINKALL=$llvm_cv_no_link_all_option
-
-
-case $llvm_cv_platform_type in
- Unix)
-
-cat >>confdefs.h <<\_ACEOF
-#define LLVM_ON_UNIX 1
-_ACEOF
-
- LLVM_ON_UNIX=1
-
- LLVM_ON_WIN32=0
-
- ;;
- Win32)
-
-cat >>confdefs.h <<\_ACEOF
-#define LLVM_ON_WIN32 1
-_ACEOF
-
- LLVM_ON_UNIX=0
-
- LLVM_ON_WIN32=1
-
- ;;
-esac
-
-{ echo "$as_me:$LINENO: checking target architecture" >&5
-echo $ECHO_N "checking target architecture... $ECHO_C" >&6; }
-if test "${llvm_cv_target_arch+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- case $target in
- i?86-*) llvm_cv_target_arch="x86" ;;
- amd64-* | x86_64-*) llvm_cv_target_arch="x86_64" ;;
- sparc*-*) llvm_cv_target_arch="Sparc" ;;
- powerpc*-*) llvm_cv_target_arch="PowerPC" ;;
- arm*-*) llvm_cv_target_arch="ARM" ;;
- aarch64*-*) llvm_cv_target_arch="AArch64" ;;
- mips-* | mips64-*) llvm_cv_target_arch="Mips" ;;
- mipsel-* | mips64el-*) llvm_cv_target_arch="Mips" ;;
- xcore-*) llvm_cv_target_arch="XCore" ;;
- msp430-*) llvm_cv_target_arch="MSP430" ;;
- hexagon-*) llvm_cv_target_arch="Hexagon" ;;
- mblaze-*) llvm_cv_target_arch="MBlaze" ;;
- nvptx-*) llvm_cv_target_arch="NVPTX" ;;
- s390x-*) llvm_cv_target_arch="SystemZ" ;;
- *) llvm_cv_target_arch="Unknown" ;;
-esac
-fi
-{ echo "$as_me:$LINENO: result: $llvm_cv_target_arch" >&5
-echo "${ECHO_T}$llvm_cv_target_arch" >&6; }
-
-if test "$llvm_cv_target_arch" = "Unknown" ; then
- { echo "$as_me:$LINENO: WARNING: Configuring LLVM for an unknown target archicture" >&5
-echo "$as_me: WARNING: Configuring LLVM for an unknown target archicture" >&2;}
-fi
-
-case "$llvm_cv_target_arch" in
- x86) LLVM_NATIVE_ARCH="X86" ;;
- x86_64) LLVM_NATIVE_ARCH="X86" ;;
- *) LLVM_NATIVE_ARCH="$llvm_cv_target_arch" ;;
-esac
-
-ARCH=$llvm_cv_target_arch
-
-
-case $host in
- i?86-*) host_arch="x86" ;;
- amd64-* | x86_64-*) host_arch="x86_64" ;;
- sparc*-*) host_arch="Sparc" ;;
- powerpc*-*) host_arch="PowerPC" ;;
- arm*-*) host_arch="ARM" ;;
- aarch64*-*) host_arch="AArch64" ;;
- mips-* | mips64-*) host_arch="Mips" ;;
- mipsel-* | mips64el-*) host_arch="Mips" ;;
- xcore-*) host_arch="XCore" ;;
- msp430-*) host_arch="MSP430" ;;
- hexagon-*) host_arch="Hexagon" ;;
- mblaze-*) host_arch="MBlaze" ;;
- s390x-*) host_arch="SystemZ" ;;
- *) host_arch="Unknown" ;;
-esac
-
-if test "$host_arch" = "Unknown" ; then
- { echo "$as_me:$LINENO: WARNING: Configuring LLVM for an unknown host archicture" >&5
-echo "$as_me: WARNING: Configuring LLVM for an unknown host archicture" >&2;}
-fi
-
-HOST_ARCH=$host_arch
-
-
-
-
-{ echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5
-echo $ECHO_N "checking for grep that handles long lines and -e... $ECHO_C" >&6; }
-if test "${ac_cv_path_GREP+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- # Extract the first word of "grep ggrep" to use in msg output
-if test -z "$GREP"; then
-set dummy grep ggrep; ac_prog_name=$2
-if test "${ac_cv_path_GREP+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_path_GREP_found=false
-# Loop through the user's path and test for each of PROGNAME-LIST
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_prog in grep ggrep; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
- { test -f "$ac_path_GREP" && $as_executable_p "$ac_path_GREP"; } || continue
- # Check for GNU ac_path_GREP and select it if it is found.
- # Check for GNU $ac_path_GREP
-case `"$ac_path_GREP" --version 2>&1` in
-*GNU*)
- ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
-*)
- ac_count=0
- echo $ECHO_N "0123456789$ECHO_C" >"conftest.in"
- while :
- do
- cat "conftest.in" "conftest.in" >"conftest.tmp"
- mv "conftest.tmp" "conftest.in"
- cp "conftest.in" "conftest.nl"
- echo 'GREP' >> "conftest.nl"
- "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
- diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
- ac_count=`expr $ac_count + 1`
- if test $ac_count -gt ${ac_path_GREP_max-0}; then
- # Best one so far, save it but keep looking for a better one
- ac_cv_path_GREP="$ac_path_GREP"
- ac_path_GREP_max=$ac_count
- fi
- # 10*(2^10) chars as input seems more than enough
- test $ac_count -gt 10 && break
- done
- rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
-esac
-
-
- $ac_path_GREP_found && break 3
- done
-done
-
-done
-IFS=$as_save_IFS
-
-
-fi
-
-GREP="$ac_cv_path_GREP"
-if test -z "$GREP"; then
- { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
-echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-else
- ac_cv_path_GREP=$GREP
-fi
-
-
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5
-echo "${ECHO_T}$ac_cv_path_GREP" >&6; }
- GREP="$ac_cv_path_GREP"
-
-
-{ echo "$as_me:$LINENO: checking for egrep" >&5
-echo $ECHO_N "checking for egrep... $ECHO_C" >&6; }
-if test "${ac_cv_path_EGREP+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
- then ac_cv_path_EGREP="$GREP -E"
- else
- # Extract the first word of "egrep" to use in msg output
-if test -z "$EGREP"; then
-set dummy egrep; ac_prog_name=$2
-if test "${ac_cv_path_EGREP+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_path_EGREP_found=false
-# Loop through the user's path and test for each of PROGNAME-LIST
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_prog in egrep; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
- { test -f "$ac_path_EGREP" && $as_executable_p "$ac_path_EGREP"; } || continue
- # Check for GNU ac_path_EGREP and select it if it is found.
- # Check for GNU $ac_path_EGREP
-case `"$ac_path_EGREP" --version 2>&1` in
-*GNU*)
- ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
-*)
- ac_count=0
- echo $ECHO_N "0123456789$ECHO_C" >"conftest.in"
- while :
- do
- cat "conftest.in" "conftest.in" >"conftest.tmp"
- mv "conftest.tmp" "conftest.in"
- cp "conftest.in" "conftest.nl"
- echo 'EGREP' >> "conftest.nl"
- "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
- diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
- ac_count=`expr $ac_count + 1`
- if test $ac_count -gt ${ac_path_EGREP_max-0}; then
- # Best one so far, save it but keep looking for a better one
- ac_cv_path_EGREP="$ac_path_EGREP"
- ac_path_EGREP_max=$ac_count
- fi
- # 10*(2^10) chars as input seems more than enough
- test $ac_count -gt 10 && break
- done
- rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
-esac
-
-
- $ac_path_EGREP_found && break 3
- done
-done
-
-done
-IFS=$as_save_IFS
-
-
-fi
-
-EGREP="$ac_cv_path_EGREP"
-if test -z "$EGREP"; then
- { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
-echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-else
- ac_cv_path_EGREP=$EGREP
-fi
-
-
- fi
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5
-echo "${ECHO_T}$ac_cv_path_EGREP" >&6; }
- EGREP="$ac_cv_path_EGREP"
-
-
-{ echo "$as_me:$LINENO: checking for ANSI C header files" >&5
-echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6; }
-if test "${ac_cv_header_stdc+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <stdlib.h>
-#include <stdarg.h>
-#include <string.h>
-#include <float.h>
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_header_stdc=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_header_stdc=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-
-if test $ac_cv_header_stdc = yes; then
- # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <string.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- $EGREP "memchr" >/dev/null 2>&1; then
- :
-else
- ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-fi
-
-if test $ac_cv_header_stdc = yes; then
- # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <stdlib.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- $EGREP "free" >/dev/null 2>&1; then
- :
-else
- ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-fi
-
-if test $ac_cv_header_stdc = yes; then
- # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
- if test "$cross_compiling" = yes; then
- :
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <ctype.h>
-#include <stdlib.h>
-#if ((' ' & 0x0FF) == 0x020)
-# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
-# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
-#else
-# define ISLOWER(c) \
- (('a' <= (c) && (c) <= 'i') \
- || ('j' <= (c) && (c) <= 'r') \
- || ('s' <= (c) && (c) <= 'z'))
-# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
-#endif
-
-#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
-int
-main ()
-{
- int i;
- for (i = 0; i < 256; i++)
- if (XOR (islower (i), ISLOWER (i))
- || toupper (i) != TOUPPER (i))
- return 2;
- return 0;
-}
-_ACEOF
-rm -f conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- :
-else
- echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
-ac_cv_header_stdc=no
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-
-
-fi
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
-echo "${ECHO_T}$ac_cv_header_stdc" >&6; }
-if test $ac_cv_header_stdc = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define STDC_HEADERS 1
-_ACEOF
-
-fi
-
-# On IRIX 5.3, sys/types and inttypes.h are conflicting.
-
-
-
-
-
-
-
-
-
-for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
- inttypes.h stdint.h unistd.h
-do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-{ echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- eval "$as_ac_Header=yes"
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- eval "$as_ac_Header=no"
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
- cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-
-done
-
-
-{ echo "$as_me:$LINENO: checking whether byte ordering is bigendian" >&5
-echo $ECHO_N "checking whether byte ordering is bigendian... $ECHO_C" >&6; }
-if test "${ac_cv_c_bigendian+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- # See if sys/param.h defines the BYTE_ORDER macro.
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <sys/types.h>
-#include <sys/param.h>
-
-int
-main ()
-{
-#if !BYTE_ORDER || !BIG_ENDIAN || !LITTLE_ENDIAN
- bogus endian macros
-#endif
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- # It does; now see whether it defined to BIG_ENDIAN or not.
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <sys/types.h>
-#include <sys/param.h>
-
-int
-main ()
-{
-#if BYTE_ORDER != BIG_ENDIAN
- not big endian
-#endif
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_c_bigendian=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_c_bigendian=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- # It does not; compile a test program.
-if test "$cross_compiling" = yes; then
- # try to guess the endianness by grepping values into an object file
- ac_cv_c_bigendian=unknown
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-short int ascii_mm[] = { 0x4249, 0x4765, 0x6E44, 0x6961, 0x6E53, 0x7953, 0 };
-short int ascii_ii[] = { 0x694C, 0x5454, 0x656C, 0x6E45, 0x6944, 0x6E61, 0 };
-void _ascii () { char *s = (char *) ascii_mm; s = (char *) ascii_ii; }
-short int ebcdic_ii[] = { 0x89D3, 0xE3E3, 0x8593, 0x95C5, 0x89C4, 0x9581, 0 };
-short int ebcdic_mm[] = { 0xC2C9, 0xC785, 0x95C4, 0x8981, 0x95E2, 0xA8E2, 0 };
-void _ebcdic () { char *s = (char *) ebcdic_mm; s = (char *) ebcdic_ii; }
-int
-main ()
-{
- _ascii (); _ebcdic ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- if grep BIGenDianSyS conftest.$ac_objext >/dev/null ; then
- ac_cv_c_bigendian=yes
-fi
-if grep LiTTleEnDian conftest.$ac_objext >/dev/null ; then
- if test "$ac_cv_c_bigendian" = unknown; then
- ac_cv_c_bigendian=no
- else
- # finding both strings is unlikely to happen, but who knows?
- ac_cv_c_bigendian=unknown
- fi
-fi
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-int
-main ()
-{
-
- /* Are we little or big endian? From Harbison&Steele. */
- union
- {
- long int l;
- char c[sizeof (long int)];
- } u;
- u.l = 1;
- return u.c[sizeof (long int) - 1] == 1;
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_c_bigendian=no
-else
- echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
-ac_cv_c_bigendian=yes
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_c_bigendian" >&5
-echo "${ECHO_T}$ac_cv_c_bigendian" >&6; }
-case $ac_cv_c_bigendian in
- yes)
- ENDIAN=big
- ;;
- no)
- ENDIAN=little
- ;;
- *)
- { { echo "$as_me:$LINENO: error: unknown endianness
-presetting ac_cv_c_bigendian=no (or yes) will help" >&5
-echo "$as_me: error: unknown endianness
-presetting ac_cv_c_bigendian=no (or yes) will help" >&2;}
- { (exit 1); exit 1; }; } ;;
-esac
-
-
-if test "$cross_compiling" = yes; then
- LLVM_CROSS_COMPILING=1
-
-
-{ echo "$as_me:$LINENO: checking for executable suffix on build platform" >&5
-echo $ECHO_N "checking for executable suffix on build platform... $ECHO_C" >&6; }
-if test "${ac_cv_build_exeext+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
- ac_cv_build_exeext=.exe
-else
- ac_build_prefix=${build_alias}-
-
- # Extract the first word of "${ac_build_prefix}gcc", so it can be a program name with args.
-set dummy ${ac_build_prefix}gcc; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_BUILD_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$BUILD_CC"; then
- ac_cv_prog_BUILD_CC="$BUILD_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_BUILD_CC="${ac_build_prefix}gcc"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-BUILD_CC=$ac_cv_prog_BUILD_CC
-if test -n "$BUILD_CC"; then
- { echo "$as_me:$LINENO: result: $BUILD_CC" >&5
-echo "${ECHO_T}$BUILD_CC" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
- if test -z "$BUILD_CC"; then
- # Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_BUILD_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$BUILD_CC"; then
- ac_cv_prog_BUILD_CC="$BUILD_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_BUILD_CC="gcc"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-BUILD_CC=$ac_cv_prog_BUILD_CC
-if test -n "$BUILD_CC"; then
- { echo "$as_me:$LINENO: result: $BUILD_CC" >&5
-echo "${ECHO_T}$BUILD_CC" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
- if test -z "$BUILD_CC"; then
- # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_BUILD_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$BUILD_CC"; then
- ac_cv_prog_BUILD_CC="$BUILD_CC" # Let the user override the test.
-else
- ac_prog_rejected=no
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
- ac_prog_rejected=yes
- continue
- fi
- ac_cv_prog_BUILD_CC="cc"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-if test $ac_prog_rejected = yes; then
- # We found a bogon in the path, so make sure we never use it.
- set dummy $ac_cv_prog_BUILD_CC
- shift
- if test $# != 0; then
- # We chose a different compiler from the bogus one.
- # However, it has the same basename, so the bogon will be chosen
- # first if we set BUILD_CC to just the basename; use the full file name.
- shift
- ac_cv_prog_BUILD_CC="$as_dir/$ac_word${1+' '}$@"
- fi
-fi
-fi
-fi
-BUILD_CC=$ac_cv_prog_BUILD_CC
-if test -n "$BUILD_CC"; then
- { echo "$as_me:$LINENO: result: $BUILD_CC" >&5
-echo "${ECHO_T}$BUILD_CC" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
- fi
- fi
- test -z "$BUILD_CC" && { { echo "$as_me:$LINENO: error: no acceptable cc found in \$PATH" >&5
-echo "$as_me: error: no acceptable cc found in \$PATH" >&2;}
- { (exit 1); exit 1; }; }
- ac_build_link='${BUILD_CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
- rm -f conftest*
- echo 'int main () { return 0; }' > conftest.$ac_ext
- ac_cv_build_exeext=
- if { (eval echo "$as_me:$LINENO: \"$ac_build_link\"") >&5
- (eval $ac_build_link) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
- for file in conftest.*; do
- case $file in
- *.c | *.o | *.obj | *.dSYM) ;;
- *) ac_cv_build_exeext=`echo $file | sed -e s/conftest//` ;;
- esac
- done
- else
- { { echo "$as_me:$LINENO: error: installation or configuration problem: compiler cannot create executables." >&5
-echo "$as_me: error: installation or configuration problem: compiler cannot create executables." >&2;}
- { (exit 1); exit 1; }; }
- fi
- rm -f conftest*
- test x"${ac_cv_build_exeext}" = x && ac_cv_build_exeext=blank
-fi
-fi
-
-BUILD_EXEEXT=""
-test x"${ac_cv_build_exeext}" != xblank && BUILD_EXEEXT=${ac_cv_build_exeext}
-{ echo "$as_me:$LINENO: result: ${ac_cv_build_exeext}" >&5
-echo "${ECHO_T}${ac_cv_build_exeext}" >&6; }
-ac_build_exeext=$BUILD_EXEEXT
-
- ac_build_prefix=${build_alias}-
- # Extract the first word of "${ac_build_prefix}g++", so it can be a program name with args.
-set dummy ${ac_build_prefix}g++; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_BUILD_CXX+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$BUILD_CXX"; then
- ac_cv_prog_BUILD_CXX="$BUILD_CXX" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_BUILD_CXX="${ac_build_prefix}g++"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-BUILD_CXX=$ac_cv_prog_BUILD_CXX
-if test -n "$BUILD_CXX"; then
- { echo "$as_me:$LINENO: result: $BUILD_CXX" >&5
-echo "${ECHO_T}$BUILD_CXX" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
- if test -z "$BUILD_CXX"; then
- # Extract the first word of "g++", so it can be a program name with args.
-set dummy g++; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_BUILD_CXX+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$BUILD_CXX"; then
- ac_cv_prog_BUILD_CXX="$BUILD_CXX" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_BUILD_CXX="g++"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-BUILD_CXX=$ac_cv_prog_BUILD_CXX
-if test -n "$BUILD_CXX"; then
- { echo "$as_me:$LINENO: result: $BUILD_CXX" >&5
-echo "${ECHO_T}$BUILD_CXX" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
- if test -z "$BUILD_CXX"; then
- # Extract the first word of "c++", so it can be a program name with args.
-set dummy c++; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_BUILD_CXX+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$BUILD_CXX"; then
- ac_cv_prog_BUILD_CXX="$BUILD_CXX" # Let the user override the test.
-else
- ac_prog_rejected=no
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/c++"; then
- ac_prog_rejected=yes
- continue
- fi
- ac_cv_prog_BUILD_CXX="c++"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-if test $ac_prog_rejected = yes; then
- # We found a bogon in the path, so make sure we never use it.
- set dummy $ac_cv_prog_BUILD_CXX
- shift
- if test $# != 0; then
- # We chose a different compiler from the bogus one.
- # However, it has the same basename, so the bogon will be chosen
- # first if we set BUILD_CXX to just the basename; use the full file name.
- shift
- ac_cv_prog_BUILD_CXX="$as_dir/$ac_word${1+' '}$@"
- fi
-fi
-fi
-fi
-BUILD_CXX=$ac_cv_prog_BUILD_CXX
-if test -n "$BUILD_CXX"; then
- { echo "$as_me:$LINENO: result: $BUILD_CXX" >&5
-echo "${ECHO_T}$BUILD_CXX" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
- fi
- fi
-else
- LLVM_CROSS_COMPILING=0
-
-fi
-
-if test -d ".svn" -o -d "${srcdir}/.svn" -o -d ".git" -o -d "${srcdir}/.git"; then
- cvsbuild="yes"
- optimize="no"
- CVSBUILD=CVSBUILD=1
-
-else
- cvsbuild="no"
- optimize="yes"
-fi
-
-
-# Check whether --enable-libcpp was given.
-if test "${enable_libcpp+set}" = set; then
- enableval=$enable_libcpp;
-else
- enableval=default
-fi
-
-case "$enableval" in
- yes) ENABLE_LIBCPP=1
- ;;
- no) ENABLE_LIBCPP=0
- ;;
- default) ENABLE_LIBCPP=0
-;;
- *) { { echo "$as_me:$LINENO: error: Invalid setting for --enable-libcpp. Use \"yes\" or \"no\"" >&5
-echo "$as_me: error: Invalid setting for --enable-libcpp. Use \"yes\" or \"no\"" >&2;}
- { (exit 1); exit 1; }; } ;;
-esac
-
-# Check whether --enable-cxx11 was given.
-if test "${enable_cxx11+set}" = set; then
- enableval=$enable_cxx11;
-else
- enableval=default
-fi
-
-case "$enableval" in
- yes) ENABLE_CXX11=1
- ;;
- no) ENABLE_CXX11=0
- ;;
- default) ENABLE_CXX11=0
-;;
- *) { { echo "$as_me:$LINENO: error: Invalid setting for --enable-cxx11. Use \"yes\" or \"no\"" >&5
-echo "$as_me: error: Invalid setting for --enable-cxx11. Use \"yes\" or \"no\"" >&2;}
- { (exit 1); exit 1; }; } ;;
-esac
-
-clang_arcmt="yes"
-# Check whether --enable-clang-arcmt was given.
-if test "${enable_clang_arcmt+set}" = set; then
- enableval=$enable_clang_arcmt; clang_arcmt="$enableval"
-else
- enableval="yes"
-fi
-
-case "$enableval" in
- yes) ENABLE_CLANG_ARCMT=1
- ;;
- no) ENABLE_CLANG_ARCMT=0
- ;;
- default) ENABLE_CLANG_ARCMT=1
-;;
- *) { { echo "$as_me:$LINENO: error: Invalid setting for --enable-clang-arcmt. Use \"yes\" or \"no\"" >&5
-echo "$as_me: error: Invalid setting for --enable-clang-arcmt. Use \"yes\" or \"no\"" >&2;}
- { (exit 1); exit 1; }; } ;;
-esac
-
-clang_static_analyzer="yes"
-# Check whether --enable-clang-static-analyzer was given.
-if test "${enable_clang_static_analyzer+set}" = set; then
- enableval=$enable_clang_static_analyzer; clang_static_analyzer="$enableval"
-else
- enableval="yes"
-fi
-
-case "$enableval" in
- yes) ENABLE_CLANG_STATIC_ANALYZER=1
- ;;
- no) ENABLE_CLANG_STATIC_ANALYZER=0
- ;;
- default) ENABLE_CLANG_STATIC_ANALYZER=1
-;;
- *) { { echo "$as_me:$LINENO: error: Invalid setting for --enable-clang-static-analyzer. Use \"yes\" or \"no\"" >&5
-echo "$as_me: error: Invalid setting for --enable-clang-static-analyzer. Use \"yes\" or \"no\"" >&2;}
- { (exit 1); exit 1; }; } ;;
-esac
-
-# Check whether --enable-clang-rewriter was given.
-if test "${enable_clang_rewriter+set}" = set; then
- enableval=$enable_clang_rewriter;
-else
- enableval="yes"
-fi
-
-case "$enableval" in
- yes) ENABLE_CLANG_REWRITER=1
- ;;
- no)
- if test ${clang_arcmt} != "no" ; then
- { { echo "$as_me:$LINENO: error: Cannot enable clang ARC Migration Tool while disabling rewriter." >&5
-echo "$as_me: error: Cannot enable clang ARC Migration Tool while disabling rewriter." >&2;}
- { (exit 1); exit 1; }; }
- fi
- if test ${clang_static_analyzer} != "no" ; then
- { { echo "$as_me:$LINENO: error: Cannot enable clang static analyzer while disabling rewriter." >&5
-echo "$as_me: error: Cannot enable clang static analyzer while disabling rewriter." >&2;}
- { (exit 1); exit 1; }; }
- fi
- ENABLE_CLANG_REWRITER=0
-
- ;;
- default) ENABLE_CLANG_REWRITER=1
-;;
- *) { { echo "$as_me:$LINENO: error: Invalid setting for --enable-clang-rewriter. Use \"yes\" or \"no\"" >&5
-echo "$as_me: error: Invalid setting for --enable-clang-rewriter. Use \"yes\" or \"no\"" >&2;}
- { (exit 1); exit 1; }; } ;;
-esac
-
-# Check whether --enable-optimized was given.
-if test "${enable_optimized+set}" = set; then
- enableval=$enable_optimized;
-else
- enableval=$optimize
-fi
-
-if test ${enableval} = "no" ; then
- ENABLE_OPTIMIZED=
-
-else
- ENABLE_OPTIMIZED=ENABLE_OPTIMIZED=1
-
-fi
-
-# Check whether --enable-profiling was given.
-if test "${enable_profiling+set}" = set; then
- enableval=$enable_profiling;
-else
- enableval="no"
-fi
-
-if test ${enableval} = "no" ; then
- ENABLE_PROFILING=
-
-else
- ENABLE_PROFILING=ENABLE_PROFILING=1
-
-fi
-
-# Check whether --enable-assertions was given.
-if test "${enable_assertions+set}" = set; then
- enableval=$enable_assertions;
-else
- enableval="yes"
-fi
-
-if test ${enableval} = "yes" ; then
- DISABLE_ASSERTIONS=
-
-else
- DISABLE_ASSERTIONS=DISABLE_ASSERTIONS=1
-
-fi
-
-# Check whether --enable-werror was given.
-if test "${enable_werror+set}" = set; then
- enableval=$enable_werror;
-else
- enableval="no"
-fi
-
-case "$enableval" in
- yes) ENABLE_WERROR=1
- ;;
- no) ENABLE_WERROR=0
- ;;
- default) ENABLE_WERROR=0
-;;
- *) { { echo "$as_me:$LINENO: error: Invalid setting for --enable-werror. Use \"yes\" or \"no\"" >&5
-echo "$as_me: error: Invalid setting for --enable-werror. Use \"yes\" or \"no\"" >&2;}
- { (exit 1); exit 1; }; } ;;
-esac
-
-# Check whether --enable-expensive-checks was given.
-if test "${enable_expensive_checks+set}" = set; then
- enableval=$enable_expensive_checks;
-else
- enableval="no"
-fi
-
-if test ${enableval} = "yes" ; then
- ENABLE_EXPENSIVE_CHECKS=ENABLE_EXPENSIVE_CHECKS=1
-
- EXPENSIVE_CHECKS=yes
-
-else
- ENABLE_EXPENSIVE_CHECKS=
-
- EXPENSIVE_CHECKS=no
-
-fi
-
-# Check whether --enable-debug-runtime was given.
-if test "${enable_debug_runtime+set}" = set; then
- enableval=$enable_debug_runtime;
-else
- enableval=no
-fi
-
-if test ${enableval} = "no" ; then
- DEBUG_RUNTIME=
-
-else
- DEBUG_RUNTIME=DEBUG_RUNTIME=1
-
-fi
-
-# Check whether --enable-debug-symbols was given.
-if test "${enable_debug_symbols+set}" = set; then
- enableval=$enable_debug_symbols;
-else
- enableval=no
-fi
-
-if test ${enableval} = "no" ; then
- DEBUG_SYMBOLS=
-
-else
- DEBUG_SYMBOLS=DEBUG_SYMBOLS=1
-
-fi
-
-# Check whether --enable-keep-symbols was given.
-if test "${enable_keep_symbols+set}" = set; then
- enableval=$enable_keep_symbols;
-else
- enableval=no
-fi
-
-if test ${enableval} = "no" ; then
- KEEP_SYMBOLS=
-
-else
- KEEP_SYMBOLS=KEEP_SYMBOLS=1
-
-fi
-
-# Check whether --enable-jit was given.
-if test "${enable_jit+set}" = set; then
- enableval=$enable_jit;
-else
- enableval=default
-fi
-
-if test ${enableval} = "no"
-then
- JIT=
-
-else
- case "$llvm_cv_target_arch" in
- x86) TARGET_HAS_JIT=1
- ;;
- Sparc) TARGET_HAS_JIT=0
- ;;
- PowerPC) TARGET_HAS_JIT=1
- ;;
- x86_64) TARGET_HAS_JIT=1
- ;;
- ARM) TARGET_HAS_JIT=1
- ;;
- AArch64) TARGET_HAS_JIT=0
- ;;
- Mips) TARGET_HAS_JIT=1
- ;;
- XCore) TARGET_HAS_JIT=0
- ;;
- MSP430) TARGET_HAS_JIT=0
- ;;
- Hexagon) TARGET_HAS_JIT=0
- ;;
- MBlaze) TARGET_HAS_JIT=0
- ;;
- NVPTX) TARGET_HAS_JIT=0
- ;;
- SystemZ) TARGET_HAS_JIT=1
- ;;
- *) TARGET_HAS_JIT=0
- ;;
- esac
-fi
-
-# Check whether --enable-docs was given.
-if test "${enable_docs+set}" = set; then
- enableval=$enable_docs;
-else
- enableval=default
-fi
-
-case "$enableval" in
- yes) ENABLE_DOCS=1
- ;;
- no) ENABLE_DOCS=0
- ;;
- default) ENABLE_DOCS=1
- ;;
- *) { { echo "$as_me:$LINENO: error: Invalid setting for --enable-docs. Use \"yes\" or \"no\"" >&5
-echo "$as_me: error: Invalid setting for --enable-docs. Use \"yes\" or \"no\"" >&2;}
- { (exit 1); exit 1; }; } ;;
-esac
-
-# Check whether --enable-doxygen was given.
-if test "${enable_doxygen+set}" = set; then
- enableval=$enable_doxygen;
-else
- enableval=default
-fi
-
-case "$enableval" in
- yes) ENABLE_DOXYGEN=1
- ;;
- no) ENABLE_DOXYGEN=0
- ;;
- default) ENABLE_DOXYGEN=0
- ;;
- *) { { echo "$as_me:$LINENO: error: Invalid setting for --enable-doxygen. Use \"yes\" or \"no\"" >&5
-echo "$as_me: error: Invalid setting for --enable-doxygen. Use \"yes\" or \"no\"" >&2;}
- { (exit 1); exit 1; }; } ;;
-esac
-
-# Check whether --enable-threads was given.
-if test "${enable_threads+set}" = set; then
- enableval=$enable_threads;
-else
- enableval=default
-fi
-
-case "$enableval" in
- yes) LLVM_ENABLE_THREADS=1
- ;;
- no) LLVM_ENABLE_THREADS=0
- ;;
- default) LLVM_ENABLE_THREADS=1
- ;;
- *) { { echo "$as_me:$LINENO: error: Invalid setting for --enable-threads. Use \"yes\" or \"no\"" >&5
-echo "$as_me: error: Invalid setting for --enable-threads. Use \"yes\" or \"no\"" >&2;}
- { (exit 1); exit 1; }; } ;;
-esac
-
-cat >>confdefs.h <<_ACEOF
-#define LLVM_ENABLE_THREADS $LLVM_ENABLE_THREADS
-_ACEOF
-
-
-# Check whether --enable-pthreads was given.
-if test "${enable_pthreads+set}" = set; then
- enableval=$enable_pthreads;
-else
- enableval=default
-fi
-
-case "$enableval" in
- yes) ENABLE_PTHREADS=1
- ;;
- no) ENABLE_PTHREADS=0
- ;;
- default) ENABLE_PTHREADS=1
- ;;
- *) { { echo "$as_me:$LINENO: error: Invalid setting for --enable-pthreads. Use \"yes\" or \"no\"" >&5
-echo "$as_me: error: Invalid setting for --enable-pthreads. Use \"yes\" or \"no\"" >&2;}
- { (exit 1); exit 1; }; } ;;
-esac
-
-# Check whether --enable-zlib was given.
-if test "${enable_zlib+set}" = set; then
- enableval=$enable_zlib;
-else
- enableval=default
-fi
-
-case "$enableval" in
- yes) LLVM_ENABLE_ZLIB=1
- ;;
- no) LLVM_ENABLE_ZLIB=0
- ;;
- default) LLVM_ENABLE_ZLIB=1
- ;;
- *) { { echo "$as_me:$LINENO: error: Invalid setting for --enable-zlib. Use \"yes\" or \"no\"" >&5
-echo "$as_me: error: Invalid setting for --enable-zlib. Use \"yes\" or \"no\"" >&2;}
- { (exit 1); exit 1; }; } ;;
-esac
-
-cat >>confdefs.h <<_ACEOF
-#define LLVM_ENABLE_ZLIB $LLVM_ENABLE_ZLIB
-_ACEOF
-
-
-# Check whether --enable-pic was given.
-if test "${enable_pic+set}" = set; then
- enableval=$enable_pic;
-else
- enableval=default
-fi
-
-case "$enableval" in
- yes) ENABLE_PIC=1
- ;;
- no) ENABLE_PIC=0
- ;;
- default) ENABLE_PIC=1
- ;;
- *) { { echo "$as_me:$LINENO: error: Invalid setting for --enable-pic. Use \"yes\" or \"no\"" >&5
-echo "$as_me: error: Invalid setting for --enable-pic. Use \"yes\" or \"no\"" >&2;}
- { (exit 1); exit 1; }; } ;;
-esac
-
-cat >>confdefs.h <<_ACEOF
-#define ENABLE_PIC $ENABLE_PIC
-_ACEOF
-
-
-# Check whether --enable-shared was given.
-if test "${enable_shared+set}" = set; then
- enableval=$enable_shared;
-else
- enableval=default
-fi
-
-case "$enableval" in
- yes) ENABLE_SHARED=1
- ;;
- no) ENABLE_SHARED=0
- ;;
- default) ENABLE_SHARED=0
- ;;
- *) { { echo "$as_me:$LINENO: error: Invalid setting for --enable-shared. Use \"yes\" or \"no\"" >&5
-echo "$as_me: error: Invalid setting for --enable-shared. Use \"yes\" or \"no\"" >&2;}
- { (exit 1); exit 1; }; } ;;
-esac
-
-# Check whether --enable-embed-stdcxx was given.
-if test "${enable_embed_stdcxx+set}" = set; then
- enableval=$enable_embed_stdcxx;
-else
- enableval=default
-fi
-
-case "$enableval" in
- yes) ENABLE_EMBED_STDCXX=1
- ;;
- no) ENABLE_EMBED_STDCXX=0
- ;;
- default) ENABLE_EMBED_STDCXX=0
- ;;
- *) { { echo "$as_me:$LINENO: error: Invalid setting for --enable-embed-stdcxx. Use \"yes\" or \"no\"" >&5
-echo "$as_me: error: Invalid setting for --enable-embed-stdcxx. Use \"yes\" or \"no\"" >&2;}
- { (exit 1); exit 1; }; } ;;
-esac
-
-# Check whether --enable-timestamps was given.
-if test "${enable_timestamps+set}" = set; then
- enableval=$enable_timestamps;
-else
- enableval=default
-fi
-
-case "$enableval" in
- yes) ENABLE_TIMESTAMPS=1
- ;;
- no) ENABLE_TIMESTAMPS=0
- ;;
- default) ENABLE_TIMESTAMPS=1
- ;;
- *) { { echo "$as_me:$LINENO: error: Invalid setting for --enable-timestamps. Use \"yes\" or \"no\"" >&5
-echo "$as_me: error: Invalid setting for --enable-timestamps. Use \"yes\" or \"no\"" >&2;}
- { (exit 1); exit 1; }; } ;;
-esac
-
-cat >>confdefs.h <<_ACEOF
-#define ENABLE_TIMESTAMPS $ENABLE_TIMESTAMPS
-_ACEOF
-
-
-
-# Check whether --enable-backtraces was given.
-if test "${enable_backtraces+set}" = set; then
- enableval=$enable_backtraces;
-else
- enableval=default
-fi
-
-case "$enableval" in
- yes) ENABLE_BACKTRACES=1
- ;;
- no) ENABLE_BACKTRACES=0
- ;;
- default) ENABLE_BACKTRACES=1
- ;;
- *) { { echo "$as_me:$LINENO: error: Invalid setting for --enable-backtraces. Use \"yes\" or \"no\"" >&5
-echo "$as_me: error: Invalid setting for --enable-backtraces. Use \"yes\" or \"no\"" >&2;}
- { (exit 1); exit 1; }; } ;;
-esac
-
-cat >>confdefs.h <<_ACEOF
-#define ENABLE_BACKTRACES $ENABLE_BACKTRACES
-_ACEOF
-
-
-TARGETS_TO_BUILD=""
-# Check whether --enable-targets was given.
-if test "${enable_targets+set}" = set; then
- enableval=$enable_targets;
-else
- enableval=all
-fi
-
-if test "$enableval" = host-only ; then
- enableval=host
-fi
-case "$enableval" in
- all) TARGETS_TO_BUILD="X86 Sparc PowerPC AArch64 ARM Mips XCore MSP430 CppBackend MBlaze NVPTX Hexagon SystemZ" ;;
- *)for a_target in `echo $enableval|sed -e 's/,/ /g' ` ; do
- case "$a_target" in
- x86) TARGETS_TO_BUILD="X86 $TARGETS_TO_BUILD" ;;
- x86_64) TARGETS_TO_BUILD="X86 $TARGETS_TO_BUILD" ;;
- sparc) TARGETS_TO_BUILD="Sparc $TARGETS_TO_BUILD" ;;
- powerpc) TARGETS_TO_BUILD="PowerPC $TARGETS_TO_BUILD" ;;
- aarch64) TARGETS_TO_BUILD="AArch64 $TARGETS_TO_BUILD" ;;
- arm) TARGETS_TO_BUILD="ARM $TARGETS_TO_BUILD" ;;
- mips) TARGETS_TO_BUILD="Mips $TARGETS_TO_BUILD" ;;
- mipsel) TARGETS_TO_BUILD="Mips $TARGETS_TO_BUILD" ;;
- mips64) TARGETS_TO_BUILD="Mips $TARGETS_TO_BUILD" ;;
- mips64el) TARGETS_TO_BUILD="Mips $TARGETS_TO_BUILD" ;;
- xcore) TARGETS_TO_BUILD="XCore $TARGETS_TO_BUILD" ;;
- msp430) TARGETS_TO_BUILD="MSP430 $TARGETS_TO_BUILD" ;;
- cpp) TARGETS_TO_BUILD="CppBackend $TARGETS_TO_BUILD" ;;
- hexagon) TARGETS_TO_BUILD="Hexagon $TARGETS_TO_BUILD" ;;
- mblaze) TARGETS_TO_BUILD="MBlaze $TARGETS_TO_BUILD" ;;
- nvptx) TARGETS_TO_BUILD="NVPTX $TARGETS_TO_BUILD" ;;
- systemz) TARGETS_TO_BUILD="SystemZ $TARGETS_TO_BUILD" ;;
- host) case "$llvm_cv_target_arch" in
- x86) TARGETS_TO_BUILD="X86 $TARGETS_TO_BUILD" ;;
- x86_64) TARGETS_TO_BUILD="X86 $TARGETS_TO_BUILD" ;;
- Sparc) TARGETS_TO_BUILD="Sparc $TARGETS_TO_BUILD" ;;
- PowerPC) TARGETS_TO_BUILD="PowerPC $TARGETS_TO_BUILD" ;;
- AArch64) TARGETS_TO_BUILD="AArch64 $TARGETS_TO_BUILD" ;;
- ARM) TARGETS_TO_BUILD="ARM $TARGETS_TO_BUILD" ;;
- Mips) TARGETS_TO_BUILD="Mips $TARGETS_TO_BUILD" ;;
- MBlaze) TARGETS_TO_BUILD="MBlaze $TARGETS_TO_BUILD" ;;
- XCore) TARGETS_TO_BUILD="XCore $TARGETS_TO_BUILD" ;;
- MSP430) TARGETS_TO_BUILD="MSP430 $TARGETS_TO_BUILD" ;;
- Hexagon) TARGETS_TO_BUILD="Hexagon $TARGETS_TO_BUILD" ;;
- NVPTX) TARGETS_TO_BUILD="NVPTX $TARGETS_TO_BUILD" ;;
- SystemZ) TARGETS_TO_BUILD="SystemZ $TARGETS_TO_BUILD" ;;
- *) { { echo "$as_me:$LINENO: error: Can not set target to build" >&5
-echo "$as_me: error: Can not set target to build" >&2;}
- { (exit 1); exit 1; }; } ;;
- esac ;;
- *) { { echo "$as_me:$LINENO: error: Unrecognized target $a_target" >&5
-echo "$as_me: error: Unrecognized target $a_target" >&2;}
- { (exit 1); exit 1; }; } ;;
- esac
- done
- ;;
-esac
-
-# Check whether --enable-experimental-targets was given.
-if test "${enable_experimental_targets+set}" = set; then
- enableval=$enable_experimental_targets;
-else
- enableval=disable
-fi
-
-
-if test ${enableval} != "disable"
-then
- TARGETS_TO_BUILD="$enableval $TARGETS_TO_BUILD"
-fi
-
-TARGETS_TO_BUILD=$TARGETS_TO_BUILD
-
-
-for a_target in $TARGETS_TO_BUILD; do
- if test "$a_target" = "$LLVM_NATIVE_ARCH"; then
-
-cat >>confdefs.h <<_ACEOF
-#define LLVM_NATIVE_ARCH $LLVM_NATIVE_ARCH
-_ACEOF
-
- LLVM_NATIVE_TARGET="LLVMInitialize${LLVM_NATIVE_ARCH}Target"
- LLVM_NATIVE_TARGETINFO="LLVMInitialize${LLVM_NATIVE_ARCH}TargetInfo"
- LLVM_NATIVE_TARGETMC="LLVMInitialize${LLVM_NATIVE_ARCH}TargetMC"
- LLVM_NATIVE_ASMPRINTER="LLVMInitialize${LLVM_NATIVE_ARCH}AsmPrinter"
- if test -f ${srcdir}/lib/Target/${LLVM_NATIVE_ARCH}/AsmParser/Makefile ; then
- LLVM_NATIVE_ASMPARSER="LLVMInitialize${LLVM_NATIVE_ARCH}AsmParser"
- fi
- if test -f ${srcdir}/lib/Target/${LLVM_NATIVE_ARCH}/Disassembler/Makefile ; then
- LLVM_NATIVE_DISASSEMBLER="LLVMInitialize${LLVM_NATIVE_ARCH}Disassembler"
- fi
-
-cat >>confdefs.h <<_ACEOF
-#define LLVM_NATIVE_TARGET $LLVM_NATIVE_TARGET
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define LLVM_NATIVE_TARGETINFO $LLVM_NATIVE_TARGETINFO
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define LLVM_NATIVE_TARGETMC $LLVM_NATIVE_TARGETMC
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define LLVM_NATIVE_ASMPRINTER $LLVM_NATIVE_ASMPRINTER
-_ACEOF
-
- if test -f ${srcdir}/lib/Target/${LLVM_NATIVE_ARCH}/AsmParser/Makefile ; then
-
-cat >>confdefs.h <<_ACEOF
-#define LLVM_NATIVE_ASMPARSER $LLVM_NATIVE_ASMPARSER
-_ACEOF
-
- fi
- if test -f ${srcdir}/lib/Target/${LLVM_NATIVE_ARCH}/Disassembler/Makefile ; then
-
-cat >>confdefs.h <<_ACEOF
-#define LLVM_NATIVE_DISASSEMBLER $LLVM_NATIVE_DISASSEMBLER
-_ACEOF
-
- fi
- fi
-done
-
-LLVM_ENUM_TARGETS=""
-LLVM_ENUM_ASM_PRINTERS=""
-LLVM_ENUM_ASM_PARSERS=""
-LLVM_ENUM_DISASSEMBLERS=""
-for target_to_build in $TARGETS_TO_BUILD; do
- LLVM_ENUM_TARGETS="LLVM_TARGET($target_to_build) $LLVM_ENUM_TARGETS"
- if test -f ${srcdir}/lib/Target/${target_to_build}/*AsmPrinter.cpp ; then
- LLVM_ENUM_ASM_PRINTERS="LLVM_ASM_PRINTER($target_to_build) $LLVM_ENUM_ASM_PRINTERS";
- fi
- if test -f ${srcdir}/lib/Target/${target_to_build}/AsmParser/Makefile ; then
- LLVM_ENUM_ASM_PARSERS="LLVM_ASM_PARSER($target_to_build) $LLVM_ENUM_ASM_PARSERS";
- fi
- if test -f ${srcdir}/lib/Target/${target_to_build}/Disassembler/Makefile ; then
- LLVM_ENUM_DISASSEMBLERS="LLVM_DISASSEMBLER($target_to_build) $LLVM_ENUM_DISASSEMBLERS";
- fi
-done
-
-
-
-
-
-
-# Check whether --with-optimize-option was given.
-if test "${with_optimize_option+set}" = set; then
- withval=$with_optimize_option;
-else
- withval=default
-fi
-
-{ echo "$as_me:$LINENO: checking optimization flags" >&5
-echo $ECHO_N "checking optimization flags... $ECHO_C" >&6; }
-case "$withval" in
- default)
- case "$llvm_cv_os_type" in
- FreeBSD) optimize_option=-O2 ;;
- MingW) optimize_option=-O2 ;;
- *) optimize_option=-O3 ;;
- esac ;;
- *) optimize_option="$withval" ;;
-esac
-OPTIMIZE_OPTION=$optimize_option
-
-{ echo "$as_me:$LINENO: result: $optimize_option" >&5
-echo "${ECHO_T}$optimize_option" >&6; }
-
-
-# Check whether --with-extra-options was given.
-if test "${with_extra_options+set}" = set; then
- withval=$with_extra_options;
-else
- withval=default
-fi
-
-case "$withval" in
- default) EXTRA_OPTIONS= ;;
- *) EXTRA_OPTIONS=$withval ;;
-esac
-EXTRA_OPTIONS=$EXTRA_OPTIONS
-
-
-
-# Check whether --with-extra-ld-options was given.
-if test "${with_extra_ld_options+set}" = set; then
- withval=$with_extra_ld_options;
-else
- withval=default
-fi
-
-case "$withval" in
- default) EXTRA_LD_OPTIONS= ;;
- *) EXTRA_LD_OPTIONS=$withval ;;
-esac
-EXTRA_LD_OPTIONS=$EXTRA_LD_OPTIONS
-
-
-# Check whether --enable-bindings was given.
-if test "${enable_bindings+set}" = set; then
- enableval=$enable_bindings;
-else
- enableval=default
-fi
-
-BINDINGS_TO_BUILD=""
-case "$enableval" in
- yes | default | auto) BINDINGS_TO_BUILD="auto" ;;
- all ) BINDINGS_TO_BUILD="ocaml" ;;
- none | no) BINDINGS_TO_BUILD="" ;;
- *)for a_binding in `echo $enableval|sed -e 's/,/ /g' ` ; do
- case "$a_binding" in
- ocaml) BINDINGS_TO_BUILD="ocaml $BINDINGS_TO_BUILD" ;;
- *) { { echo "$as_me:$LINENO: error: Unrecognized binding $a_binding" >&5
-echo "$as_me: error: Unrecognized binding $a_binding" >&2;}
- { (exit 1); exit 1; }; } ;;
- esac
- done
- ;;
-esac
-
-
-# Check whether --with-ocaml-libdir was given.
-if test "${with_ocaml_libdir+set}" = set; then
- withval=$with_ocaml_libdir;
-else
- withval=auto
-fi
-
-case "$withval" in
- auto) with_ocaml_libdir="$withval" ;;
- /* | [A-Za-z]:[\\/]*) with_ocaml_libdir="$withval" ;;
- *) { { echo "$as_me:$LINENO: error: Invalid path for --with-ocaml-libdir. Provide full path" >&5
-echo "$as_me: error: Invalid path for --with-ocaml-libdir. Provide full path" >&2;}
- { (exit 1); exit 1; }; } ;;
-esac
-
-
-# Check whether --with-clang-srcdir was given.
-if test "${with_clang_srcdir+set}" = set; then
- withval=$with_clang_srcdir;
-else
- withval="-"
-fi
-
-case "$withval" in
- -) clang_src_root="" ;;
- /* | [A-Za-z]:[\\/]*) clang_src_root="$withval" ;;
- *) clang_src_root="$ac_pwd/$withval" ;;
-esac
-CLANG_SRC_ROOT=$clang_src_root
-
-
-
-# Check whether --with-clang-resource-dir was given.
-if test "${with_clang_resource_dir+set}" = set; then
- withval=$with_clang_resource_dir;
-else
- withval=""
-fi
-
-
-cat >>confdefs.h <<_ACEOF
-#define CLANG_RESOURCE_DIR "$withval"
-_ACEOF
-
-
-
-# Check whether --with-c-include-dirs was given.
-if test "${with_c_include_dirs+set}" = set; then
- withval=$with_c_include_dirs;
-else
- withval=""
-fi
-
-
-cat >>confdefs.h <<_ACEOF
-#define C_INCLUDE_DIRS "$withval"
-_ACEOF
-
-
-# Clang normally uses the system c++ headers and libraries. With this option,
-# clang will use the ones provided by a gcc installation instead. This option should
-# be passed the same value that was used with --prefix when configuring gcc.
-
-# Check whether --with-gcc-toolchain was given.
-if test "${with_gcc_toolchain+set}" = set; then
- withval=$with_gcc_toolchain;
-else
- withval=""
-fi
-
-
-cat >>confdefs.h <<_ACEOF
-#define GCC_INSTALL_PREFIX "$withval"
-_ACEOF
-
-
-
-# Check whether --with-default-sysroot was given.
-if test "${with_default_sysroot+set}" = set; then
- withval=$with_default_sysroot;
-else
- withval=""
-fi
-
-
-cat >>confdefs.h <<_ACEOF
-#define DEFAULT_SYSROOT "$withval"
-_ACEOF
-
-
-
-# Check whether --with-binutils-include was given.
-if test "${with_binutils_include+set}" = set; then
- withval=$with_binutils_include;
-else
- withval=default
-fi
-
-case "$withval" in
- default) WITH_BINUTILS_INCDIR=default ;;
- /* | [A-Za-z]:[\\/]*) WITH_BINUTILS_INCDIR=$withval ;;
- *) { { echo "$as_me:$LINENO: error: Invalid path for --with-binutils-include. Provide full path" >&5
-echo "$as_me: error: Invalid path for --with-binutils-include. Provide full path" >&2;}
- { (exit 1); exit 1; }; } ;;
-esac
-if test "x$WITH_BINUTILS_INCDIR" != xdefault ; then
- BINUTILS_INCDIR=$WITH_BINUTILS_INCDIR
-
- if test ! -f "$WITH_BINUTILS_INCDIR/plugin-api.h"; then
- echo "$WITH_BINUTILS_INCDIR/plugin-api.h"
- { { echo "$as_me:$LINENO: error: Invalid path to directory containing plugin-api.h." >&5
-echo "$as_me: error: Invalid path to directory containing plugin-api.h." >&2;}
- { (exit 1); exit 1; }; };
- fi
-fi
-
-
-# Check whether --with-bug-report-url was given.
-if test "${with_bug_report_url+set}" = set; then
- withval=$with_bug_report_url;
-else
- withval="http://llvm.org/bugs/"
-fi
-
-
-cat >>confdefs.h <<_ACEOF
-#define BUG_REPORT_URL "$withval"
-_ACEOF
-
-
-# Check whether --enable-libffi was given.
-if test "${enable_libffi+set}" = set; then
- enableval=$enable_libffi; case "$enableval" in
- yes) llvm_cv_enable_libffi="yes" ;;
- no) llvm_cv_enable_libffi="no" ;;
- *) { { echo "$as_me:$LINENO: error: Invalid setting for --enable-libffi. Use \"yes\" or \"no\"" >&5
-echo "$as_me: error: Invalid setting for --enable-libffi. Use \"yes\" or \"no\"" >&2;}
- { (exit 1); exit 1; }; } ;;
- esac
-else
- llvm_cv_enable_libffi=no
-fi
-
-
-
-# Check whether --with-internal-prefix was given.
-if test "${with_internal_prefix+set}" = set; then
- withval=$with_internal_prefix;
-else
- withval=""
-fi
-
-INTERNAL_PREFIX=$withval
-
-
-
-{ echo "$as_me:$LINENO: checking for BSD-compatible nm" >&5
-echo $ECHO_N "checking for BSD-compatible nm... $ECHO_C" >&6; }
-if test "${lt_cv_path_NM+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$NM"; then
- # Let the user override the test.
- lt_cv_path_NM="$NM"
-else
- lt_nm_to_check="${ac_tool_prefix}nm"
- if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
- lt_nm_to_check="$lt_nm_to_check nm"
- fi
- for lt_tmp_nm in $lt_nm_to_check; do
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
- for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
- IFS="$lt_save_ifs"
- test -z "$ac_dir" && ac_dir=.
- tmp_nm="$ac_dir/$lt_tmp_nm"
- if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
- # Check to see if the nm accepts a BSD-compat flag.
- # Adding the `sed 1q' prevents false positives on HP-UX, which says:
- # nm: unknown option "B" ignored
- # Tru64's nm complains that /dev/null is an invalid object file
- case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
- */dev/null* | *'Invalid file or object type'*)
- lt_cv_path_NM="$tmp_nm -B"
- break
- ;;
- *)
- case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
- */dev/null*)
- lt_cv_path_NM="$tmp_nm -p"
- break
- ;;
- *)
- lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
- continue # so that we can try to find one that supports BSD flags
- ;;
- esac
- ;;
- esac
- fi
- done
- IFS="$lt_save_ifs"
- done
- test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
-fi
-fi
-{ echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5
-echo "${ECHO_T}$lt_cv_path_NM" >&6; }
-NM="$lt_cv_path_NM"
-
-
-
-{ echo "$as_me:$LINENO: checking for GNU make" >&5
-echo $ECHO_N "checking for GNU make... $ECHO_C" >&6; }
-if test "${llvm_cv_gnu_make_command+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- llvm_cv_gnu_make_command=''
- for a in "$MAKE" make gmake gnumake ; do
- if test -z "$a" ; then continue ; fi ;
- if ( sh -c "$a --version" 2> /dev/null | grep GNU 2>&1 > /dev/null )
- then
- llvm_cv_gnu_make_command=$a ;
- break;
- fi
- done
-fi
-{ echo "$as_me:$LINENO: result: $llvm_cv_gnu_make_command" >&5
-echo "${ECHO_T}$llvm_cv_gnu_make_command" >&6; }
- if test "x$llvm_cv_gnu_make_command" != "x" ; then
- ifGNUmake='' ;
- else
- ifGNUmake='#' ;
- { echo "$as_me:$LINENO: result: \"Not found\"" >&5
-echo "${ECHO_T}\"Not found\"" >&6; };
- fi
-
-
-{ echo "$as_me:$LINENO: checking whether ln -s works" >&5
-echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6; }
-LN_S=$as_ln_s
-if test "$LN_S" = "ln -s"; then
- { echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6; }
-else
- { echo "$as_me:$LINENO: result: no, using $LN_S" >&5
-echo "${ECHO_T}no, using $LN_S" >&6; }
-fi
-
-# Extract the first word of "cmp", so it can be a program name with args.
-set dummy cmp; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_path_CMP+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- case $CMP in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_CMP="$CMP" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_CMP="$as_dir/$ac_word$ac_exec_ext"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
- test -z "$ac_cv_path_CMP" && ac_cv_path_CMP="cmp"
- ;;
-esac
-fi
-CMP=$ac_cv_path_CMP
-if test -n "$CMP"; then
- { echo "$as_me:$LINENO: result: $CMP" >&5
-echo "${ECHO_T}$CMP" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-# Extract the first word of "cp", so it can be a program name with args.
-set dummy cp; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_path_CP+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- case $CP in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_CP="$CP" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_CP="$as_dir/$ac_word$ac_exec_ext"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
- test -z "$ac_cv_path_CP" && ac_cv_path_CP="cp"
- ;;
-esac
-fi
-CP=$ac_cv_path_CP
-if test -n "$CP"; then
- { echo "$as_me:$LINENO: result: $CP" >&5
-echo "${ECHO_T}$CP" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-# Extract the first word of "date", so it can be a program name with args.
-set dummy date; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_path_DATE+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- case $DATE in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_DATE="$DATE" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_DATE="$as_dir/$ac_word$ac_exec_ext"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
- test -z "$ac_cv_path_DATE" && ac_cv_path_DATE="date"
- ;;
-esac
-fi
-DATE=$ac_cv_path_DATE
-if test -n "$DATE"; then
- { echo "$as_me:$LINENO: result: $DATE" >&5
-echo "${ECHO_T}$DATE" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-# Extract the first word of "find", so it can be a program name with args.
-set dummy find; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_path_FIND+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- case $FIND in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_FIND="$FIND" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_FIND="$as_dir/$ac_word$ac_exec_ext"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
- test -z "$ac_cv_path_FIND" && ac_cv_path_FIND="find"
- ;;
-esac
-fi
-FIND=$ac_cv_path_FIND
-if test -n "$FIND"; then
- { echo "$as_me:$LINENO: result: $FIND" >&5
-echo "${ECHO_T}$FIND" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-# Extract the first word of "grep", so it can be a program name with args.
-set dummy grep; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_path_GREP+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- case $GREP in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_GREP="$GREP" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_GREP="$as_dir/$ac_word$ac_exec_ext"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
- test -z "$ac_cv_path_GREP" && ac_cv_path_GREP="grep"
- ;;
-esac
-fi
-GREP=$ac_cv_path_GREP
-if test -n "$GREP"; then
- { echo "$as_me:$LINENO: result: $GREP" >&5
-echo "${ECHO_T}$GREP" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-# Extract the first word of "mkdir", so it can be a program name with args.
-set dummy mkdir; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_path_MKDIR+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- case $MKDIR in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_MKDIR="$MKDIR" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_MKDIR="$as_dir/$ac_word$ac_exec_ext"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
- test -z "$ac_cv_path_MKDIR" && ac_cv_path_MKDIR="mkdir"
- ;;
-esac
-fi
-MKDIR=$ac_cv_path_MKDIR
-if test -n "$MKDIR"; then
- { echo "$as_me:$LINENO: result: $MKDIR" >&5
-echo "${ECHO_T}$MKDIR" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-# Extract the first word of "mv", so it can be a program name with args.
-set dummy mv; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_path_MV+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- case $MV in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_MV="$MV" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_MV="$as_dir/$ac_word$ac_exec_ext"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
- test -z "$ac_cv_path_MV" && ac_cv_path_MV="mv"
- ;;
-esac
-fi
-MV=$ac_cv_path_MV
-if test -n "$MV"; then
- { echo "$as_me:$LINENO: result: $MV" >&5
-echo "${ECHO_T}$MV" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_RANLIB+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$RANLIB"; then
- ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-RANLIB=$ac_cv_prog_RANLIB
-if test -n "$RANLIB"; then
- { echo "$as_me:$LINENO: result: $RANLIB" >&5
-echo "${ECHO_T}$RANLIB" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_RANLIB"; then
- ac_ct_RANLIB=$RANLIB
- # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$ac_ct_RANLIB"; then
- ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_RANLIB="ranlib"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
-if test -n "$ac_ct_RANLIB"; then
- { echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
-echo "${ECHO_T}$ac_ct_RANLIB" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
- if test "x$ac_ct_RANLIB" = x; then
- RANLIB=":"
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf at gnu.org." >&5
-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf at gnu.org." >&2;}
-ac_tool_warned=yes ;;
-esac
- RANLIB=$ac_ct_RANLIB
- fi
-else
- RANLIB="$ac_cv_prog_RANLIB"
-fi
-
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_AR+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$AR"; then
- ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_AR="${ac_tool_prefix}ar"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-AR=$ac_cv_prog_AR
-if test -n "$AR"; then
- { echo "$as_me:$LINENO: result: $AR" >&5
-echo "${ECHO_T}$AR" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_AR"; then
- ac_ct_AR=$AR
- # Extract the first word of "ar", so it can be a program name with args.
-set dummy ar; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_ac_ct_AR+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$ac_ct_AR"; then
- ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_AR="ar"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_AR=$ac_cv_prog_ac_ct_AR
-if test -n "$ac_ct_AR"; then
- { echo "$as_me:$LINENO: result: $ac_ct_AR" >&5
-echo "${ECHO_T}$ac_ct_AR" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
- if test "x$ac_ct_AR" = x; then
- AR="false"
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf at gnu.org." >&5
-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf at gnu.org." >&2;}
-ac_tool_warned=yes ;;
-esac
- AR=$ac_ct_AR
- fi
-else
- AR="$ac_cv_prog_AR"
-fi
-
-# Extract the first word of "rm", so it can be a program name with args.
-set dummy rm; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_path_RM+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- case $RM in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_RM="$RM" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_RM="$as_dir/$ac_word$ac_exec_ext"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
- test -z "$ac_cv_path_RM" && ac_cv_path_RM="rm"
- ;;
-esac
-fi
-RM=$ac_cv_path_RM
-if test -n "$RM"; then
- { echo "$as_me:$LINENO: result: $RM" >&5
-echo "${ECHO_T}$RM" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-# Extract the first word of "sed", so it can be a program name with args.
-set dummy sed; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_path_SED+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- case $SED in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_SED="$SED" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_SED="$as_dir/$ac_word$ac_exec_ext"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
- test -z "$ac_cv_path_SED" && ac_cv_path_SED="sed"
- ;;
-esac
-fi
-SED=$ac_cv_path_SED
-if test -n "$SED"; then
- { echo "$as_me:$LINENO: result: $SED" >&5
-echo "${ECHO_T}$SED" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-# Extract the first word of "tar", so it can be a program name with args.
-set dummy tar; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_path_TAR+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- case $TAR in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_TAR="$TAR" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_TAR="$as_dir/$ac_word$ac_exec_ext"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
- test -z "$ac_cv_path_TAR" && ac_cv_path_TAR="gtar"
- ;;
-esac
-fi
-TAR=$ac_cv_path_TAR
-if test -n "$TAR"; then
- { echo "$as_me:$LINENO: result: $TAR" >&5
-echo "${ECHO_T}$TAR" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-# Extract the first word of "pwd", so it can be a program name with args.
-set dummy pwd; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_path_BINPWD+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- case $BINPWD in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_BINPWD="$BINPWD" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_BINPWD="$as_dir/$ac_word$ac_exec_ext"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
- test -z "$ac_cv_path_BINPWD" && ac_cv_path_BINPWD="pwd"
- ;;
-esac
-fi
-BINPWD=$ac_cv_path_BINPWD
-if test -n "$BINPWD"; then
- { echo "$as_me:$LINENO: result: $BINPWD" >&5
-echo "${ECHO_T}$BINPWD" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-
-# Extract the first word of "Graphviz", so it can be a program name with args.
-set dummy Graphviz; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_path_GRAPHVIZ+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- case $GRAPHVIZ in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_GRAPHVIZ="$GRAPHVIZ" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_GRAPHVIZ="$as_dir/$ac_word$ac_exec_ext"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
- test -z "$ac_cv_path_GRAPHVIZ" && ac_cv_path_GRAPHVIZ="echo Graphviz"
- ;;
-esac
-fi
-GRAPHVIZ=$ac_cv_path_GRAPHVIZ
-if test -n "$GRAPHVIZ"; then
- { echo "$as_me:$LINENO: result: $GRAPHVIZ" >&5
-echo "${ECHO_T}$GRAPHVIZ" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-if test "$GRAPHVIZ" != "echo Graphviz" ; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_GRAPHVIZ 1
-_ACEOF
-
- if test "$llvm_cv_os_type" = "MingW" ; then
- GRAPHVIZ=`echo $GRAPHVIZ | sed 's/^\/\([A-Za-z]\)\//\1:\//' `
- fi
-
-cat >>confdefs.h <<_ACEOF
-#define LLVM_PATH_GRAPHVIZ "$GRAPHVIZ${EXEEXT}"
-_ACEOF
-
-fi
-# Extract the first word of "dot", so it can be a program name with args.
-set dummy dot; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_path_DOT+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- case $DOT in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_DOT="$DOT" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_DOT="$as_dir/$ac_word$ac_exec_ext"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
- test -z "$ac_cv_path_DOT" && ac_cv_path_DOT="echo dot"
- ;;
-esac
-fi
-DOT=$ac_cv_path_DOT
-if test -n "$DOT"; then
- { echo "$as_me:$LINENO: result: $DOT" >&5
-echo "${ECHO_T}$DOT" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-if test "$DOT" != "echo dot" ; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_DOT 1
-_ACEOF
-
- if test "$llvm_cv_os_type" = "MingW" ; then
- DOT=`echo $DOT | sed 's/^\/\([A-Za-z]\)\//\1:\//' `
- fi
-
-cat >>confdefs.h <<_ACEOF
-#define LLVM_PATH_DOT "$DOT${EXEEXT}"
-_ACEOF
-
-fi
-# Extract the first word of "fdp", so it can be a program name with args.
-set dummy fdp; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_path_FDP+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- case $FDP in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_FDP="$FDP" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_FDP="$as_dir/$ac_word$ac_exec_ext"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
- test -z "$ac_cv_path_FDP" && ac_cv_path_FDP="echo fdp"
- ;;
-esac
-fi
-FDP=$ac_cv_path_FDP
-if test -n "$FDP"; then
- { echo "$as_me:$LINENO: result: $FDP" >&5
-echo "${ECHO_T}$FDP" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-if test "$FDP" != "echo fdp" ; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_FDP 1
-_ACEOF
-
- if test "$llvm_cv_os_type" = "MingW" ; then
- FDP=`echo $FDP | sed 's/^\/\([A-Za-z]\)\//\1:\//' `
- fi
-
-cat >>confdefs.h <<_ACEOF
-#define LLVM_PATH_FDP "$FDP${EXEEXT}"
-_ACEOF
-
-fi
-# Extract the first word of "neato", so it can be a program name with args.
-set dummy neato; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_path_NEATO+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- case $NEATO in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_NEATO="$NEATO" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_NEATO="$as_dir/$ac_word$ac_exec_ext"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
- test -z "$ac_cv_path_NEATO" && ac_cv_path_NEATO="echo neato"
- ;;
-esac
-fi
-NEATO=$ac_cv_path_NEATO
-if test -n "$NEATO"; then
- { echo "$as_me:$LINENO: result: $NEATO" >&5
-echo "${ECHO_T}$NEATO" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-if test "$NEATO" != "echo neato" ; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_NEATO 1
-_ACEOF
-
- if test "$llvm_cv_os_type" = "MingW" ; then
- NEATO=`echo $NEATO | sed 's/^\/\([A-Za-z]\)\//\1:\//' `
- fi
-
-cat >>confdefs.h <<_ACEOF
-#define LLVM_PATH_NEATO "$NEATO${EXEEXT}"
-_ACEOF
-
-fi
-# Extract the first word of "twopi", so it can be a program name with args.
-set dummy twopi; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_path_TWOPI+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- case $TWOPI in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_TWOPI="$TWOPI" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_TWOPI="$as_dir/$ac_word$ac_exec_ext"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
- test -z "$ac_cv_path_TWOPI" && ac_cv_path_TWOPI="echo twopi"
- ;;
-esac
-fi
-TWOPI=$ac_cv_path_TWOPI
-if test -n "$TWOPI"; then
- { echo "$as_me:$LINENO: result: $TWOPI" >&5
-echo "${ECHO_T}$TWOPI" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-if test "$TWOPI" != "echo twopi" ; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_TWOPI 1
-_ACEOF
-
- if test "$llvm_cv_os_type" = "MingW" ; then
- TWOPI=`echo $TWOPI | sed 's/^\/\([A-Za-z]\)\//\1:\//' `
- fi
-
-cat >>confdefs.h <<_ACEOF
-#define LLVM_PATH_TWOPI "$TWOPI${EXEEXT}"
-_ACEOF
-
-fi
-# Extract the first word of "circo", so it can be a program name with args.
-set dummy circo; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_path_CIRCO+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- case $CIRCO in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_CIRCO="$CIRCO" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_CIRCO="$as_dir/$ac_word$ac_exec_ext"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
- test -z "$ac_cv_path_CIRCO" && ac_cv_path_CIRCO="echo circo"
- ;;
-esac
-fi
-CIRCO=$ac_cv_path_CIRCO
-if test -n "$CIRCO"; then
- { echo "$as_me:$LINENO: result: $CIRCO" >&5
-echo "${ECHO_T}$CIRCO" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-if test "$CIRCO" != "echo circo" ; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_CIRCO 1
-_ACEOF
-
- if test "$llvm_cv_os_type" = "MingW" ; then
- CIRCO=`echo $CIRCO | sed 's/^\/\([A-Za-z]\)\//\1:\//' `
- fi
-
-cat >>confdefs.h <<_ACEOF
-#define LLVM_PATH_CIRCO "$CIRCO${EXEEXT}"
-_ACEOF
-
-fi
-for ac_prog in gv gsview32
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_path_GV+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- case $GV in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_GV="$GV" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_GV="$as_dir/$ac_word$ac_exec_ext"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-GV=$ac_cv_path_GV
-if test -n "$GV"; then
- { echo "$as_me:$LINENO: result: $GV" >&5
-echo "${ECHO_T}$GV" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
- test -n "$GV" && break
-done
-test -n "$GV" || GV="echo gv"
-
-if test "$GV" != "echo gv" ; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_GV 1
-_ACEOF
-
- if test "$llvm_cv_os_type" = "MingW" ; then
- GV=`echo $GV | sed 's/^\/\([A-Za-z]\)\//\1:\//' `
- fi
-
-cat >>confdefs.h <<_ACEOF
-#define LLVM_PATH_GV "$GV${EXEEXT}"
-_ACEOF
-
-fi
-# Extract the first word of "dotty", so it can be a program name with args.
-set dummy dotty; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_path_DOTTY+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- case $DOTTY in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_DOTTY="$DOTTY" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_DOTTY="$as_dir/$ac_word$ac_exec_ext"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
- test -z "$ac_cv_path_DOTTY" && ac_cv_path_DOTTY="echo dotty"
- ;;
-esac
-fi
-DOTTY=$ac_cv_path_DOTTY
-if test -n "$DOTTY"; then
- { echo "$as_me:$LINENO: result: $DOTTY" >&5
-echo "${ECHO_T}$DOTTY" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-if test "$DOTTY" != "echo dotty" ; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_DOTTY 1
-_ACEOF
-
- if test "$llvm_cv_os_type" = "MingW" ; then
- DOTTY=`echo $DOTTY | sed 's/^\/\([A-Za-z]\)\//\1:\//' `
- fi
-
-cat >>confdefs.h <<_ACEOF
-#define LLVM_PATH_DOTTY "$DOTTY${EXEEXT}"
-_ACEOF
-
-fi
-# Extract the first word of "xdot.py", so it can be a program name with args.
-set dummy xdot.py; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_path_XDOT_PY+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- case $XDOT_PY in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_XDOT_PY="$XDOT_PY" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_XDOT_PY="$as_dir/$ac_word$ac_exec_ext"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
- test -z "$ac_cv_path_XDOT_PY" && ac_cv_path_XDOT_PY="echo xdot.py"
- ;;
-esac
-fi
-XDOT_PY=$ac_cv_path_XDOT_PY
-if test -n "$XDOT_PY"; then
- { echo "$as_me:$LINENO: result: $XDOT_PY" >&5
-echo "${ECHO_T}$XDOT_PY" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-if test "$XDOT_PY" != "echo xdot.py" ; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_XDOT_PY 1
-_ACEOF
-
- if test "$llvm_cv_os_type" = "MingW" ; then
- XDOT_PY=`echo $XDOT_PY | sed 's/^\/\([A-Za-z]\)\//\1:\//' `
- fi
-
-cat >>confdefs.h <<_ACEOF
-#define LLVM_PATH_XDOT_PY "$XDOT_PY${EXEEXT}"
-_ACEOF
-
-fi
-
-# Find a good install program. We prefer a C program (faster),
-# so one script is as good as another. But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AmigaOS /C/install, which installs bootblocks on floppy discs
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# OS/2's system install, which has a completely different semantic
-# ./install, which can be erroneously created by make from ./install.sh.
-{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
-echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; }
-if test -z "$INSTALL"; then
-if test "${ac_cv_path_install+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- # Account for people who put trailing slashes in PATH elements.
-case $as_dir/ in
- ./ | .// | /cC/* | \
- /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
- ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \
- /usr/ucb/* ) ;;
- *)
- # OSF1 and SCO ODT 3.0 have their own names for install.
- # Don't use installbsd from OSF since it installs stuff as root
- # by default.
- for ac_prog in ginstall scoinst install; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; }; then
- if test $ac_prog = install &&
- grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
- # AIX install. It has an incompatible calling convention.
- :
- elif test $ac_prog = install &&
- grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
- # program-specific install script used by HP pwplus--don't use.
- :
- else
- ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
- break 3
- fi
- fi
- done
- done
- ;;
-esac
-done
-IFS=$as_save_IFS
-
-
-fi
- if test "${ac_cv_path_install+set}" = set; then
- INSTALL=$ac_cv_path_install
- else
- # As a last resort, use the slow shell script. Don't cache a
- # value for INSTALL within a source directory, because that will
- # break other packages using the cache if that directory is
- # removed, or if the value is a relative name.
- INSTALL=$ac_install_sh
- fi
-fi
-{ echo "$as_me:$LINENO: result: $INSTALL" >&5
-echo "${ECHO_T}$INSTALL" >&6; }
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-case "$INSTALL" in
- [\\/$]* | ?:[\\/]* ) ;;
- *) INSTALL="\\\$(TOPSRCDIR)/$INSTALL" ;;
-esac
-
-# Extract the first word of "bzip2", so it can be a program name with args.
-set dummy bzip2; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_path_BZIP2+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- case $BZIP2 in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_BZIP2="$BZIP2" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_BZIP2="$as_dir/$ac_word$ac_exec_ext"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-BZIP2=$ac_cv_path_BZIP2
-if test -n "$BZIP2"; then
- { echo "$as_me:$LINENO: result: $BZIP2" >&5
-echo "${ECHO_T}$BZIP2" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-# Extract the first word of "cat", so it can be a program name with args.
-set dummy cat; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_path_CAT+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- case $CAT in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_CAT="$CAT" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_CAT="$as_dir/$ac_word$ac_exec_ext"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-CAT=$ac_cv_path_CAT
-if test -n "$CAT"; then
- { echo "$as_me:$LINENO: result: $CAT" >&5
-echo "${ECHO_T}$CAT" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-# Extract the first word of "doxygen", so it can be a program name with args.
-set dummy doxygen; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_path_DOXYGEN+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- case $DOXYGEN in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_DOXYGEN="$DOXYGEN" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_DOXYGEN="$as_dir/$ac_word$ac_exec_ext"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-DOXYGEN=$ac_cv_path_DOXYGEN
-if test -n "$DOXYGEN"; then
- { echo "$as_me:$LINENO: result: $DOXYGEN" >&5
-echo "${ECHO_T}$DOXYGEN" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-# Extract the first word of "groff", so it can be a program name with args.
-set dummy groff; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_path_GROFF+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- case $GROFF in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_GROFF="$GROFF" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_GROFF="$as_dir/$ac_word$ac_exec_ext"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-GROFF=$ac_cv_path_GROFF
-if test -n "$GROFF"; then
- { echo "$as_me:$LINENO: result: $GROFF" >&5
-echo "${ECHO_T}$GROFF" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-# Extract the first word of "gzip", so it can be a program name with args.
-set dummy gzip; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_path_GZIPBIN+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- case $GZIPBIN in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_GZIPBIN="$GZIPBIN" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_GZIPBIN="$as_dir/$ac_word$ac_exec_ext"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-GZIPBIN=$ac_cv_path_GZIPBIN
-if test -n "$GZIPBIN"; then
- { echo "$as_me:$LINENO: result: $GZIPBIN" >&5
-echo "${ECHO_T}$GZIPBIN" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-# Extract the first word of "pdfroff", so it can be a program name with args.
-set dummy pdfroff; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_path_PDFROFF+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- case $PDFROFF in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_PDFROFF="$PDFROFF" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_PDFROFF="$as_dir/$ac_word$ac_exec_ext"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-PDFROFF=$ac_cv_path_PDFROFF
-if test -n "$PDFROFF"; then
- { echo "$as_me:$LINENO: result: $PDFROFF" >&5
-echo "${ECHO_T}$PDFROFF" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-# Extract the first word of "zip", so it can be a program name with args.
-set dummy zip; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_path_ZIP+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- case $ZIP in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_ZIP="$ZIP" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_ZIP="$as_dir/$ac_word$ac_exec_ext"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-ZIP=$ac_cv_path_ZIP
-if test -n "$ZIP"; then
- { echo "$as_me:$LINENO: result: $ZIP" >&5
-echo "${ECHO_T}$ZIP" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-for ac_prog in ocamlc
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_path_OCAMLC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- case $OCAMLC in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_OCAMLC="$OCAMLC" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_OCAMLC="$as_dir/$ac_word$ac_exec_ext"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-OCAMLC=$ac_cv_path_OCAMLC
-if test -n "$OCAMLC"; then
- { echo "$as_me:$LINENO: result: $OCAMLC" >&5
-echo "${ECHO_T}$OCAMLC" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
- test -n "$OCAMLC" && break
-done
-
-for ac_prog in ocamlopt
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_path_OCAMLOPT+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- case $OCAMLOPT in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_OCAMLOPT="$OCAMLOPT" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_OCAMLOPT="$as_dir/$ac_word$ac_exec_ext"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-OCAMLOPT=$ac_cv_path_OCAMLOPT
-if test -n "$OCAMLOPT"; then
- { echo "$as_me:$LINENO: result: $OCAMLOPT" >&5
-echo "${ECHO_T}$OCAMLOPT" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
- test -n "$OCAMLOPT" && break
-done
-
-for ac_prog in ocamldep
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_path_OCAMLDEP+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- case $OCAMLDEP in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_OCAMLDEP="$OCAMLDEP" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_OCAMLDEP="$as_dir/$ac_word$ac_exec_ext"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-OCAMLDEP=$ac_cv_path_OCAMLDEP
-if test -n "$OCAMLDEP"; then
- { echo "$as_me:$LINENO: result: $OCAMLDEP" >&5
-echo "${ECHO_T}$OCAMLDEP" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
- test -n "$OCAMLDEP" && break
-done
-
-for ac_prog in ocamldoc
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_path_OCAMLDOC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- case $OCAMLDOC in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_OCAMLDOC="$OCAMLDOC" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_OCAMLDOC="$as_dir/$ac_word$ac_exec_ext"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-OCAMLDOC=$ac_cv_path_OCAMLDOC
-if test -n "$OCAMLDOC"; then
- { echo "$as_me:$LINENO: result: $OCAMLDOC" >&5
-echo "${ECHO_T}$OCAMLDOC" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
- test -n "$OCAMLDOC" && break
-done
-
-for ac_prog in gas as
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_path_GAS+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- case $GAS in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_GAS="$GAS" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_GAS="$as_dir/$ac_word$ac_exec_ext"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-GAS=$ac_cv_path_GAS
-if test -n "$GAS"; then
- { echo "$as_me:$LINENO: result: $GAS" >&5
-echo "${ECHO_T}$GAS" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
- test -n "$GAS" && break
-done
-
-
-{ echo "$as_me:$LINENO: checking for linker version" >&5
-echo $ECHO_N "checking for linker version... $ECHO_C" >&6; }
-if test "${llvm_cv_link_version+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-
- version_string="$(ld -v 2>&1 | head -1)"
-
- # Check for ld64.
- if (echo "$version_string" | grep -q "ld64"); then
- llvm_cv_link_version=$(echo "$version_string" | sed -e "s#.*ld64-\([^ ]*\)\( (.*)\)\{0,1\}#\1#")
- else
- llvm_cv_link_version=$(echo "$version_string" | sed -e "s#[^0-9]*\([0-9.]*\).*#\1#")
- fi
-
-fi
-{ echo "$as_me:$LINENO: result: $llvm_cv_link_version" >&5
-echo "${ECHO_T}$llvm_cv_link_version" >&6; }
-
-cat >>confdefs.h <<_ACEOF
-#define HOST_LINK_VERSION "$llvm_cv_link_version"
-_ACEOF
-
-
-
-{ echo "$as_me:$LINENO: checking for compiler -Wl,-R<path> option" >&5
-echo $ECHO_N "checking for compiler -Wl,-R<path> option... $ECHO_C" >&6; }
-if test "${llvm_cv_link_use_r+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
- oldcflags="$CFLAGS"
- CFLAGS="$CFLAGS -Wl,-R."
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- llvm_cv_link_use_r=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- llvm_cv_link_use_r=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
- CFLAGS="$oldcflags"
- ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-fi
-{ echo "$as_me:$LINENO: result: $llvm_cv_link_use_r" >&5
-echo "${ECHO_T}$llvm_cv_link_use_r" >&6; }
-if test "$llvm_cv_link_use_r" = yes ; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_LINK_R 1
-_ACEOF
-
- fi
-
-
-{ echo "$as_me:$LINENO: checking for compiler -Wl,-export-dynamic option" >&5
-echo $ECHO_N "checking for compiler -Wl,-export-dynamic option... $ECHO_C" >&6; }
-if test "${llvm_cv_link_use_export_dynamic+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
- oldcflags="$CFLAGS"
- CFLAGS="$CFLAGS -Wl,-export-dynamic"
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- llvm_cv_link_use_export_dynamic=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- llvm_cv_link_use_export_dynamic=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
- CFLAGS="$oldcflags"
- ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-fi
-{ echo "$as_me:$LINENO: result: $llvm_cv_link_use_export_dynamic" >&5
-echo "${ECHO_T}$llvm_cv_link_use_export_dynamic" >&6; }
-if test "$llvm_cv_link_use_export_dynamic" = yes ; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_LINK_EXPORT_DYNAMIC 1
-_ACEOF
-
- fi
-
-
-{ echo "$as_me:$LINENO: checking for compiler -Wl,--version-script option" >&5
-echo $ECHO_N "checking for compiler -Wl,--version-script option... $ECHO_C" >&6; }
-if test "${llvm_cv_link_use_version_script+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
- oldcflags="$CFLAGS"
-
- # The following code is from the autoconf manual,
- # "11.13: Limitations of Usual Tools".
- # Create a temporary directory $tmp in $TMPDIR (default /tmp).
- # Use mktemp if possible; otherwise fall back on mkdir,
- # with $RANDOM to make collisions less likely.
- : ${TMPDIR=/tmp}
- {
- tmp=`
- (umask 077 && mktemp -d "$TMPDIR/fooXXXXXX") 2>/dev/null
- ` &&
- test -n "$tmp" && test -d "$tmp"
- } || {
- tmp=$TMPDIR/foo$$-$RANDOM
- (umask 077 && mkdir "$tmp")
- } || exit $?
-
- echo "{" > "$tmp/export.map"
- echo " global: main;" >> "$tmp/export.map"
- echo " local: *;" >> "$tmp/export.map"
- echo "};" >> "$tmp/export.map"
-
- CFLAGS="$CFLAGS -Wl,--version-script=$tmp/export.map"
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- llvm_cv_link_use_version_script=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- llvm_cv_link_use_version_script=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
- rm "$tmp/export.map"
- rmdir "$tmp"
- CFLAGS="$oldcflags"
- ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-fi
-{ echo "$as_me:$LINENO: result: $llvm_cv_link_use_version_script" >&5
-echo "${ECHO_T}$llvm_cv_link_use_version_script" >&6; }
-if test "$llvm_cv_link_use_version_script" = yes ; then
- HAVE_LINK_VERSION_SCRIPT=1
-
- fi
-
-
-
-
-{ echo "$as_me:$LINENO: checking for an ANSI C-conforming const" >&5
-echo $ECHO_N "checking for an ANSI C-conforming const... $ECHO_C" >&6; }
-if test "${ac_cv_c_const+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-/* FIXME: Include the comments suggested by Paul. */
-#ifndef __cplusplus
- /* Ultrix mips cc rejects this. */
- typedef int charset[2];
- const charset x;
- /* SunOS 4.1.1 cc rejects this. */
- char const *const *ccp;
- char **p;
- /* NEC SVR4.0.2 mips cc rejects this. */
- struct point {int x, y;};
- static struct point const zero = {0,0};
- /* AIX XL C 1.02.0.0 rejects this.
- It does not let you subtract one const X* pointer from another in
- an arm of an if-expression whose if-part is not a constant
- expression */
- const char *g = "string";
- ccp = &g + (g ? g-g : 0);
- /* HPUX 7.0 cc rejects these. */
- ++ccp;
- p = (char**) ccp;
- ccp = (char const *const *) p;
- { /* SCO 3.2v4 cc rejects this. */
- char *t;
- char const *s = 0 ? (char *) 0 : (char const *) 0;
-
- *t++ = 0;
- if (s) return 0;
- }
- { /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */
- int x[] = {25, 17};
- const int *foo = &x[0];
- ++foo;
- }
- { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */
- typedef const int *iptr;
- iptr p = 0;
- ++p;
- }
- { /* AIX XL C 1.02.0.0 rejects this saying
- "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */
- struct s { int j; const int *ap[3]; };
- struct s *b; b->j = 5;
- }
- { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */
- const int foo = 10;
- if (!foo) return 0;
- }
- return !x[0] && !zero.x;
-#endif
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_c_const=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_c_const=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_c_const" >&5
-echo "${ECHO_T}$ac_cv_c_const" >&6; }
-if test $ac_cv_c_const = no; then
-
-cat >>confdefs.h <<\_ACEOF
-#define const
-_ACEOF
-
-fi
-
-
-
-
-
-
-ac_header_dirent=no
-for ac_hdr in dirent.h sys/ndir.h sys/dir.h ndir.h; do
- as_ac_Header=`echo "ac_cv_header_dirent_$ac_hdr" | $as_tr_sh`
-{ echo "$as_me:$LINENO: checking for $ac_hdr that defines DIR" >&5
-echo $ECHO_N "checking for $ac_hdr that defines DIR... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <sys/types.h>
-#include <$ac_hdr>
-
-int
-main ()
-{
-if ((DIR *) 0)
-return 0;
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- eval "$as_ac_Header=yes"
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- eval "$as_ac_Header=no"
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
- cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_hdr" | $as_tr_cpp` 1
-_ACEOF
-
-ac_header_dirent=$ac_hdr; break
-fi
-
-done
-# Two versions of opendir et al. are in -ldir and -lx on SCO Xenix.
-if test $ac_header_dirent = dirent.h; then
- { echo "$as_me:$LINENO: checking for library containing opendir" >&5
-echo $ECHO_N "checking for library containing opendir... $ECHO_C" >&6; }
-if test "${ac_cv_search_opendir+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_func_search_save_LIBS=$LIBS
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char opendir ();
-int
-main ()
-{
-return opendir ();
- ;
- return 0;
-}
-_ACEOF
-for ac_lib in '' dir; do
- if test -z "$ac_lib"; then
- ac_res="none required"
- else
- ac_res=-l$ac_lib
- LIBS="-l$ac_lib $ac_func_search_save_LIBS"
- fi
- rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_search_opendir=$ac_res
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext
- if test "${ac_cv_search_opendir+set}" = set; then
- break
-fi
-done
-if test "${ac_cv_search_opendir+set}" = set; then
- :
-else
- ac_cv_search_opendir=no
-fi
-rm conftest.$ac_ext
-LIBS=$ac_func_search_save_LIBS
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_search_opendir" >&5
-echo "${ECHO_T}$ac_cv_search_opendir" >&6; }
-ac_res=$ac_cv_search_opendir
-if test "$ac_res" != no; then
- test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
-
-fi
-
-else
- { echo "$as_me:$LINENO: checking for library containing opendir" >&5
-echo $ECHO_N "checking for library containing opendir... $ECHO_C" >&6; }
-if test "${ac_cv_search_opendir+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_func_search_save_LIBS=$LIBS
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char opendir ();
-int
-main ()
-{
-return opendir ();
- ;
- return 0;
-}
-_ACEOF
-for ac_lib in '' x; do
- if test -z "$ac_lib"; then
- ac_res="none required"
- else
- ac_res=-l$ac_lib
- LIBS="-l$ac_lib $ac_func_search_save_LIBS"
- fi
- rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_search_opendir=$ac_res
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext
- if test "${ac_cv_search_opendir+set}" = set; then
- break
-fi
-done
-if test "${ac_cv_search_opendir+set}" = set; then
- :
-else
- ac_cv_search_opendir=no
-fi
-rm conftest.$ac_ext
-LIBS=$ac_func_search_save_LIBS
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_search_opendir" >&5
-echo "${ECHO_T}$ac_cv_search_opendir" >&6; }
-ac_res=$ac_cv_search_opendir
-if test "$ac_res" != no; then
- test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
-
-fi
-
-fi
-
-
-for ac_header in dlfcn.h
-do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- { echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-else
- # Is the header compilable?
-{ echo "$as_me:$LINENO: checking $ac_header usability" >&5
-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_header_compiler=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_header_compiler=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-echo "${ECHO_T}$ac_header_compiler" >&6; }
-
-# Is the header present?
-{ echo "$as_me:$LINENO: checking $ac_header presence" >&5
-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <$ac_header>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
- ac_header_preproc=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_header_preproc=no
-fi
-
-rm -f conftest.err conftest.$ac_ext
-{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-echo "${ECHO_T}$ac_header_preproc" >&6; }
-
-# So? What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
- yes:no: )
- { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
- ac_header_preproc=yes
- ;;
- no:yes:* )
- { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
-echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
-echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
- ( cat <<\_ASBOX
-## ------------------------------------ ##
-## Report this to http://llvm.org/bugs/ ##
-## ------------------------------------ ##
-_ASBOX
- ) | sed "s/^/$as_me: WARNING: /" >&2
- ;;
-esac
-{ echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- eval "$as_ac_Header=\$ac_header_preproc"
-fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-
-fi
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
- cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-
-done
-
-# Check whether --enable-ltdl-install was given.
-if test "${enable_ltdl_install+set}" = set; then
- enableval=$enable_ltdl_install;
-fi
-
-
-
-
-if test x"${enable_ltdl_install-no}" != xno; then
- INSTALL_LTDL_TRUE=
- INSTALL_LTDL_FALSE='#'
-else
- INSTALL_LTDL_TRUE='#'
- INSTALL_LTDL_FALSE=
-fi
-
-
-
-if test x"${enable_ltdl_convenience-no}" != xno; then
- CONVENIENCE_LTDL_TRUE=
- CONVENIENCE_LTDL_FALSE='#'
-else
- CONVENIENCE_LTDL_TRUE='#'
- CONVENIENCE_LTDL_FALSE=
-fi
-
-
-{ echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
-echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; }
-library_names_spec=
-libname_spec='lib$name'
-soname_spec=
-shrext_cmds=".so"
-postinstall_cmds=
-postuninstall_cmds=
-finish_cmds=
-finish_eval=
-shlibpath_var=
-shlibpath_overrides_runpath=unknown
-version_type=none
-dynamic_linker="$host_os ld.so"
-sys_lib_dlsearch_path_spec="/lib /usr/lib"
-if test "$GCC" = yes; then
- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
- if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
- # if the path contains ";" then we assume it to be the separator
- # otherwise default to the standard path separator (i.e. ":") - it is
- # assumed that no part of a normal pathname contains ";" but that should
- # okay in the real world where ";" in dirpaths is itself problematic.
- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
- else
- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
- fi
-else
- sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
-fi
-need_lib_prefix=unknown
-hardcode_into_libs=no
-
-# when you set need_version to no, make sure it does not cause -set_version
-# flags to be left without arguments
-need_version=unknown
-
-case $host_os in
-aix3*)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
- shlibpath_var=LIBPATH
-
- # AIX 3 has no versioning support, so we append a major version to the name.
- soname_spec='${libname}${release}${shared_ext}$major'
- ;;
-
-aix4* | aix5*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- hardcode_into_libs=yes
- if test "$host_cpu" = ia64; then
- # AIX 5 supports IA64
- library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
- shlibpath_var=LD_LIBRARY_PATH
- else
- # With GCC up to 2.95.x, collect2 would create an import file
- # for dependence libraries. The import file would start with
- # the line `#! .'. This would cause the generated library to
- # depend on `.', always an invalid library. This was fixed in
- # development snapshots of GCC prior to 3.0.
- case $host_os in
- aix4 | aix4.[01] | aix4.[01].*)
- if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
- echo ' yes '
- echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
- :
- else
- can_build_shared=no
- fi
- ;;
- esac
- # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
- # soname into executable. Probably we can add versioning support to
- # collect2, so additional links can be useful in future.
- if test "$aix_use_runtimelinking" = yes; then
- # If using run time linking (on AIX 4.2 or later) use lib<name>.so
- # instead of lib<name>.a to let people know that these are not
- # typical AIX shared libraries.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- else
- # We preserve .a as extension for shared libraries through AIX4.2
- # and later when we are not doing run time linking.
- library_names_spec='${libname}${release}.a $libname.a'
- soname_spec='${libname}${release}${shared_ext}$major'
- fi
- shlibpath_var=LIBPATH
- fi
- ;;
-
-amigaos*)
- library_names_spec='$libname.ixlibrary $libname.a'
- # Create ${libname}_ixlibrary.a entries in /sys/libs.
- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
- ;;
-
-beos*)
- library_names_spec='${libname}${shared_ext}'
- dynamic_linker="$host_os ld.so"
- shlibpath_var=LIBRARY_PATH
- ;;
-
-bsdi[45]*)
- version_type=linux
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
- sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
- # the default ld.so.conf also contains /usr/contrib/lib and
- # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
- # libtool to hard-code these into programs
- ;;
-
-cygwin* | mingw* | pw32*)
- version_type=windows
- shrext_cmds=".dll"
- need_version=no
- need_lib_prefix=no
-
- case $GCC,$host_os in
- yes,cygwin* | yes,mingw* | yes,pw32*)
- library_names_spec='$libname.dll.a'
- # DLL is installed to $(libdir)/../bin by postinstall_cmds
- postinstall_cmds='base_file=`basename \${file}`~
- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
- dldir=$destdir/`dirname \$dlpath`~
- test -d \$dldir || mkdir -p \$dldir~
- $install_prog $dir/$dlname \$dldir/$dlname~
- chmod a+x \$dldir/$dlname'
- postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
- dlpath=$dir/\$dldll~
- $rm \$dlpath'
- shlibpath_overrides_runpath=yes
-
- case $host_os in
- cygwin*)
- # Cygwin DLLs use 'cyg' prefix rather than 'lib'
- soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
- sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
- ;;
- mingw*)
- # MinGW DLLs use traditional 'lib' prefix
- soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
- if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
- # It is most probably a Windows format PATH printed by
- # mingw gcc, but we are running on Cygwin. Gcc prints its search
- # path with ; separators, and with drive letters. We can handle the
- # drive letters (cygwin fileutils understands them), so leave them,
- # especially as we might pass files found there to a mingw objdump,
- # which wouldn't understand a cygwinified path. Ahh.
- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
- else
- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
- fi
- ;;
- pw32*)
- # pw32 DLLs use 'pw' prefix rather than 'lib'
- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
- ;;
- esac
- ;;
-
- *)
- library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
- ;;
- esac
- dynamic_linker='Win32 ld.exe'
- # FIXME: first we should search . and the directory the executable is in
- shlibpath_var=PATH
- ;;
-
-darwin* | rhapsody*)
- dynamic_linker="$host_os dyld"
- version_type=darwin
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
- soname_spec='${libname}${release}${major}$shared_ext'
- shlibpath_overrides_runpath=yes
- shlibpath_var=DYLD_LIBRARY_PATH
- shrext_cmds='.dylib'
- # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
- if test "$GCC" = yes; then
- sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
- else
- sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib'
- fi
- sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
- ;;
-
-dgux*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- ;;
-
-freebsd1.*)
- dynamic_linker=no
- ;;
-
-kfreebsd*-gnu)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- dynamic_linker='GNU ld.so'
- ;;
-
-freebsd* | dragonfly*)
- # DragonFly does not have aout. When/if they implement a new
- # versioning mechanism, adjust this.
- if test -x /usr/bin/objformat; then
- objformat=`/usr/bin/objformat`
- else
- case $host_os in
- freebsd[123].*) objformat=aout ;;
- *) objformat=elf ;;
- esac
- fi
- version_type=freebsd-$objformat
- case $version_type in
- freebsd-elf*)
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
- need_version=no
- need_lib_prefix=no
- ;;
- freebsd-*)
- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
- need_version=yes
- ;;
- esac
- shlibpath_var=LD_LIBRARY_PATH
- case $host_os in
- freebsd2.*)
- shlibpath_overrides_runpath=yes
- ;;
- freebsd3.[01]* | freebsdelf3.[01]*)
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- ;;
- freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
- freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- ;;
- freebsd*) # from 4.6 on
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- ;;
- esac
- ;;
-
-gnu*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- hardcode_into_libs=yes
- ;;
-
-hpux9* | hpux10* | hpux11*)
- # Give a soname corresponding to the major version so that dld.sl refuses to
- # link against other versions.
- version_type=sunos
- need_lib_prefix=no
- need_version=no
- case $host_cpu in
- ia64*)
- shrext_cmds='.so'
- hardcode_into_libs=yes
- dynamic_linker="$host_os dld.so"
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- if test "X$HPUX_IA64_MODE" = X32; then
- sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
- else
- sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
- fi
- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
- ;;
- hppa*64*)
- shrext_cmds='.sl'
- hardcode_into_libs=yes
- dynamic_linker="$host_os dld.sl"
- shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
- ;;
- *)
- shrext_cmds='.sl'
- dynamic_linker="$host_os dld.sl"
- shlibpath_var=SHLIB_PATH
- shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- ;;
- esac
- # HP-UX runs *really* slowly unless shared libraries are mode 555.
- postinstall_cmds='chmod 555 $lib'
- ;;
-
-interix3*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- ;;
-
-irix5* | irix6* | nonstopux*)
- case $host_os in
- nonstopux*) version_type=nonstopux ;;
- *)
- if test "$lt_cv_prog_gnu_ld" = yes; then
- version_type=linux
- else
- version_type=irix
- fi ;;
- esac
- need_lib_prefix=no
- need_version=no
- soname_spec='${libname}${release}${shared_ext}$major'
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
- case $host_os in
- irix5* | nonstopux*)
- libsuff= shlibsuff=
- ;;
- *)
- case $LD in # libtool.m4 will add one of these switches to LD
- *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
- libsuff= shlibsuff= libmagic=32-bit;;
- *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
- libsuff=32 shlibsuff=N32 libmagic=N32;;
- *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
- libsuff=64 shlibsuff=64 libmagic=64-bit;;
- *) libsuff= shlibsuff= libmagic=never-match;;
- esac
- ;;
- esac
- shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
- shlibpath_overrides_runpath=no
- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
- hardcode_into_libs=yes
- ;;
-
-# No shared lib support for Linux oldld, aout, or coff.
-linux*oldld* | linux*aout* | linux*coff*)
- dynamic_linker=no
- ;;
-
-# This must be Linux ELF.
-linux*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- # This implies no fast_install, which is unacceptable.
- # Some rework will be needed to allow for fast_install
- # before this can be enabled.
- hardcode_into_libs=yes
-
- # Append ld.so.conf contents to the search path
- if test -f /etc/ld.so.conf; then
- lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
- sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
- fi
-
- # We used to test for /lib/ld.so.1 and disable shared libraries on
- # powerpc, because MkLinux only supported shared libraries with the
- # GNU dynamic linker. Since this was broken with cross compilers,
- # most powerpc-linux boxes support dynamic linking these days and
- # people can always --disable-shared, the test was removed, and we
- # assume the GNU/Linux dynamic linker is in use.
- dynamic_linker='GNU/Linux ld.so'
- ;;
-
-knetbsd*-gnu)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- dynamic_linker='GNU ld.so'
- ;;
-
-netbsd*)
- version_type=sunos
- need_lib_prefix=no
- need_version=no
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
- dynamic_linker='NetBSD (a.out) ld.so'
- else
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- dynamic_linker='NetBSD ld.elf_so'
- fi
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- ;;
-
-newsos6)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- ;;
-
-nto-qnx*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- ;;
-
-openbsd* | bitrig*)
- version_type=sunos
- sys_lib_dlsearch_path_spec="/usr/lib"
- need_lib_prefix=no
- # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
- case $host_os in
- openbsd3.3 | openbsd3.3.*) need_version=yes ;;
- *) need_version=no ;;
- esac
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- case $host_os in
- openbsd2.[89] | openbsd2.[89].*)
- shlibpath_overrides_runpath=no
- ;;
- *)
- shlibpath_overrides_runpath=yes
- ;;
- esac
- else
- shlibpath_overrides_runpath=yes
- fi
- ;;
-
-os2*)
- libname_spec='$name'
- shrext_cmds=".dll"
- need_lib_prefix=no
- library_names_spec='$libname${shared_ext} $libname.a'
- dynamic_linker='OS/2 ld.exe'
- shlibpath_var=LIBPATH
- ;;
-
-osf3* | osf4* | osf5*)
- version_type=osf
- need_lib_prefix=no
- need_version=no
- soname_spec='${libname}${release}${shared_ext}$major'
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- shlibpath_var=LD_LIBRARY_PATH
- sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
- sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
- ;;
-
-solaris*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- # ldd complains unless libraries are executable
- postinstall_cmds='chmod +x $lib'
- ;;
-
-sunos4*)
- version_type=sunos
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
- finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- if test "$with_gnu_ld" = yes; then
- need_lib_prefix=no
- fi
- need_version=yes
- ;;
-
-sysv4 | sysv4.3*)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- case $host_vendor in
- sni)
- shlibpath_overrides_runpath=no
- need_lib_prefix=no
- export_dynamic_flag_spec='${wl}-Blargedynsym'
- runpath_var=LD_RUN_PATH
- ;;
- siemens)
- need_lib_prefix=no
- ;;
- motorola)
- need_lib_prefix=no
- need_version=no
- shlibpath_overrides_runpath=no
- sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
- ;;
- esac
- ;;
-
-sysv4*MP*)
- if test -d /usr/nec ;then
- version_type=linux
- library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
- soname_spec='$libname${shared_ext}.$major'
- shlibpath_var=LD_LIBRARY_PATH
- fi
- ;;
-
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
- version_type=freebsd-elf
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- hardcode_into_libs=yes
- if test "$with_gnu_ld" = yes; then
- sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
- shlibpath_overrides_runpath=no
- else
- sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
- shlibpath_overrides_runpath=yes
- case $host_os in
- sco3.2v5*)
- sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
- ;;
- esac
- fi
- sys_lib_dlsearch_path_spec='/usr/lib'
- ;;
-
-uts4*)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- ;;
-
-*)
- dynamic_linker=no
- ;;
-esac
-{ echo "$as_me:$LINENO: result: $dynamic_linker" >&5
-echo "${ECHO_T}$dynamic_linker" >&6; }
-test "$dynamic_linker" = no && can_build_shared=no
-
-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
- variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-fi
-
-
-{ echo "$as_me:$LINENO: checking which extension is used for loadable modules" >&5
-echo $ECHO_N "checking which extension is used for loadable modules... $ECHO_C" >&6; }
-if test "${libltdl_cv_shlibext+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-
-module=yes
-eval libltdl_cv_shlibext=$shrext_cmds
-
-fi
-{ echo "$as_me:$LINENO: result: $libltdl_cv_shlibext" >&5
-echo "${ECHO_T}$libltdl_cv_shlibext" >&6; }
-if test -n "$libltdl_cv_shlibext"; then
-
-cat >>confdefs.h <<_ACEOF
-#define LTDL_SHLIB_EXT "$libltdl_cv_shlibext"
-_ACEOF
-
-fi
-
-
-{ echo "$as_me:$LINENO: checking which variable specifies run-time library path" >&5
-echo $ECHO_N "checking which variable specifies run-time library path... $ECHO_C" >&6; }
-if test "${libltdl_cv_shlibpath_var+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- libltdl_cv_shlibpath_var="$shlibpath_var"
-fi
-{ echo "$as_me:$LINENO: result: $libltdl_cv_shlibpath_var" >&5
-echo "${ECHO_T}$libltdl_cv_shlibpath_var" >&6; }
-if test -n "$libltdl_cv_shlibpath_var"; then
-
-cat >>confdefs.h <<_ACEOF
-#define LTDL_SHLIBPATH_VAR "$libltdl_cv_shlibpath_var"
-_ACEOF
-
-fi
-
-
-{ echo "$as_me:$LINENO: checking for the default library search path" >&5
-echo $ECHO_N "checking for the default library search path... $ECHO_C" >&6; }
-if test "${libltdl_cv_sys_search_path+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- libltdl_cv_sys_search_path="$sys_lib_dlsearch_path_spec"
-fi
-{ echo "$as_me:$LINENO: result: $libltdl_cv_sys_search_path" >&5
-echo "${ECHO_T}$libltdl_cv_sys_search_path" >&6; }
-if test -n "$libltdl_cv_sys_search_path"; then
- sys_search_path=
- for dir in $libltdl_cv_sys_search_path; do
- if test -z "$sys_search_path"; then
- sys_search_path="$dir"
- else
- sys_search_path="$sys_search_path$PATH_SEPARATOR$dir"
- fi
- done
-
-cat >>confdefs.h <<_ACEOF
-#define LTDL_SYSSEARCHPATH "$sys_search_path"
-_ACEOF
-
-fi
-
-{ echo "$as_me:$LINENO: checking for objdir" >&5
-echo $ECHO_N "checking for objdir... $ECHO_C" >&6; }
-if test "${libltdl_cv_objdir+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- libltdl_cv_objdir="$objdir"
- if test -n "$objdir"; then
- :
- else
- rm -f .libs 2>/dev/null
- mkdir .libs 2>/dev/null
- if test -d .libs; then
- libltdl_cv_objdir=.libs
- else
- # MS-DOS does not allow filenames that begin with a dot.
- libltdl_cv_objdir=_libs
- fi
- rmdir .libs 2>/dev/null
- fi
-
-fi
-{ echo "$as_me:$LINENO: result: $libltdl_cv_objdir" >&5
-echo "${ECHO_T}$libltdl_cv_objdir" >&6; }
-
-cat >>confdefs.h <<_ACEOF
-#define LTDL_OBJDIR "$libltdl_cv_objdir/"
-_ACEOF
-
-
-
-
-
-
-# Check for command to grab the raw symbol name followed by C symbol from nm.
-{ echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5
-echo $ECHO_N "checking command to parse $NM output from $compiler object... $ECHO_C" >&6; }
-if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-
-# These are sane defaults that work on at least a few old systems.
-# [They come from Ultrix. What could be older than Ultrix?!! ;)]
-
-# Character class describing NM global symbol codes.
-symcode='[BCDEGRST]'
-
-# Regexp to match symbols that can be accessed directly from C.
-sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
-
-# Transform an extracted symbol line into a proper C declaration
-lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'"
-
-# Transform an extracted symbol line into symbol name and symbol address
-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
-
-# Define system-specific variables.
-case $host_os in
-aix*)
- symcode='[BCDT]'
- ;;
-cygwin* | mingw* | pw32*)
- symcode='[ABCDGISTW]'
- ;;
-hpux*) # Its linker distinguishes data from code symbols
- if test "$host_cpu" = ia64; then
- symcode='[ABCDEGRST]'
- fi
- lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
- lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
- ;;
-linux*)
- if test "$host_cpu" = ia64; then
- symcode='[ABCDGIRSTW]'
- lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
- lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
- fi
- ;;
-irix* | nonstopux*)
- symcode='[BCDEGRST]'
- ;;
-osf*)
- symcode='[BCDEGQRST]'
- ;;
-solaris*)
- symcode='[BDRT]'
- ;;
-sco3.2v5*)
- symcode='[DT]'
- ;;
-sysv4.2uw2*)
- symcode='[DT]'
- ;;
-sysv5* | sco5v6* | unixware* | OpenUNIX*)
- symcode='[ABDT]'
- ;;
-sysv4)
- symcode='[DFNSTU]'
- ;;
-esac
-
-# Handle CRLF in mingw tool chain
-opt_cr=
-case $build_os in
-mingw*)
- opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
- ;;
-esac
-
-# If we're using GNU nm, then use its standard symbol codes.
-case `$NM -V 2>&1` in
-*GNU* | *'with BFD'*)
- symcode='[ABCDGIRSTW]' ;;
-esac
-
-# Try without a prefix undercore, then with it.
-for ac_symprfx in "" "_"; do
-
- # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
- symxfrm="\\1 $ac_symprfx\\2 \\2"
-
- # Write the raw and C identifiers.
- lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
-
- # Check to see that the pipe works correctly.
- pipe_works=no
-
- rm -f conftest*
- cat > conftest.$ac_ext <<EOF
-#ifdef __cplusplus
-extern "C" {
-#endif
-char nm_test_var;
-void nm_test_func(){}
-#ifdef __cplusplus
-}
-#endif
-int main(){nm_test_var='a';nm_test_func();return(0);}
-EOF
-
- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
- # Now try to grab the symbols.
- nlist=conftest.nm
- if { (eval echo "$as_me:$LINENO: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5
- (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && test -s "$nlist"; then
- # Try sorting and uniquifying the output.
- if sort "$nlist" | uniq > "$nlist"T; then
- mv -f "$nlist"T "$nlist"
- else
- rm -f "$nlist"T
- fi
-
- # Make sure that we snagged all the symbols we need.
- if grep ' nm_test_var$' "$nlist" >/dev/null; then
- if grep ' nm_test_func$' "$nlist" >/dev/null; then
- cat <<EOF > conftest.$ac_ext
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-EOF
- # Now generate the symbol file.
- eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext'
-
- cat <<EOF >> conftest.$ac_ext
-#if defined (__STDC__) && __STDC__
-# define lt_ptr_t void *
-#else
-# define lt_ptr_t char *
-# define const
-#endif
-
-/* The mapping between symbol names and symbols. */
-const struct {
- const char *name;
- lt_ptr_t address;
-}
-lt_preloaded_symbols[] =
-{
-EOF
- $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext
- cat <<\EOF >> conftest.$ac_ext
- {0, (lt_ptr_t) 0}
-};
-
-#ifdef __cplusplus
-}
-#endif
-EOF
- # Now try linking the two files.
- mv conftest.$ac_objext conftstm.$ac_objext
- lt_save_LIBS="$LIBS"
- lt_save_CFLAGS="$CFLAGS"
- LIBS="conftstm.$ac_objext"
- CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
- if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && test -s conftest${ac_exeext}; then
- pipe_works=yes
- fi
- LIBS="$lt_save_LIBS"
- CFLAGS="$lt_save_CFLAGS"
- else
- echo "cannot find nm_test_func in $nlist" >&5
- fi
- else
- echo "cannot find nm_test_var in $nlist" >&5
- fi
- else
- echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
- fi
- else
- echo "$progname: failed program was:" >&5
- cat conftest.$ac_ext >&5
- fi
- rm -f conftest* conftst*
-
- # Do not use the global_symbol_pipe unless it works.
- if test "$pipe_works" = yes; then
- break
- else
- lt_cv_sys_global_symbol_pipe=
- fi
-done
-
-fi
-
-if test -z "$lt_cv_sys_global_symbol_pipe"; then
- lt_cv_sys_global_symbol_to_cdecl=
-fi
-if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
- { echo "$as_me:$LINENO: result: failed" >&5
-echo "${ECHO_T}failed" >&6; }
-else
- { echo "$as_me:$LINENO: result: ok" >&5
-echo "${ECHO_T}ok" >&6; }
-fi
-
-
-{ echo "$as_me:$LINENO: checking whether libtool supports -dlopen/-dlpreopen" >&5
-echo $ECHO_N "checking whether libtool supports -dlopen/-dlpreopen... $ECHO_C" >&6; }
-if test "${libltdl_cv_preloaded_symbols+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$lt_cv_sys_global_symbol_pipe"; then
- libltdl_cv_preloaded_symbols=yes
- else
- libltdl_cv_preloaded_symbols=no
- fi
-
-fi
-{ echo "$as_me:$LINENO: result: $libltdl_cv_preloaded_symbols" >&5
-echo "${ECHO_T}$libltdl_cv_preloaded_symbols" >&6; }
-if test x"$libltdl_cv_preloaded_symbols" = xyes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_PRELOADED_SYMBOLS 1
-_ACEOF
-
-fi
-
-LIBADD_DL=
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-{ echo "$as_me:$LINENO: checking for shl_load" >&5
-echo $ECHO_N "checking for shl_load... $ECHO_C" >&6; }
-if test "${ac_cv_func_shl_load+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-/* Define shl_load to an innocuous variant, in case <limits.h> declares shl_load.
- For example, HP-UX 11i <limits.h> declares gettimeofday. */
-#define shl_load innocuous_shl_load
-
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char shl_load (); below.
- Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- <limits.h> exists even on freestanding compilers. */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef shl_load
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char shl_load ();
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined __stub_shl_load || defined __stub___shl_load
-choke me
-#endif
-
-int
-main ()
-{
-return shl_load ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_func_shl_load=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_func_shl_load=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5
-echo "${ECHO_T}$ac_cv_func_shl_load" >&6; }
-if test $ac_cv_func_shl_load = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_SHL_LOAD 1
-_ACEOF
-
-else
- { echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5
-echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6; }
-if test "${ac_cv_lib_dld_shl_load+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldld $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char shl_load ();
-int
-main ()
-{
-return shl_load ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_lib_dld_shl_load=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_lib_dld_shl_load=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5
-echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6; }
-if test $ac_cv_lib_dld_shl_load = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_SHL_LOAD 1
-_ACEOF
-
- LIBADD_DL="$LIBADD_DL -ldld"
-else
- { echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
-echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6; }
-if test "${ac_cv_lib_dl_dlopen+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldl $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char dlopen ();
-int
-main ()
-{
-return dlopen ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_lib_dl_dlopen=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_lib_dl_dlopen=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
-echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6; }
-if test $ac_cv_lib_dl_dlopen = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_LIBDL 1
-_ACEOF
-
- LIBADD_DL="-ldl" libltdl_cv_lib_dl_dlopen="yes"
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#if HAVE_DLFCN_H
-# include <dlfcn.h>
-#endif
-
-int
-main ()
-{
-dlopen(0, 0);
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_LIBDL 1
-_ACEOF
- libltdl_cv_func_dlopen="yes"
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- { echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5
-echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6; }
-if test "${ac_cv_lib_svld_dlopen+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-lsvld $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char dlopen ();
-int
-main ()
-{
-return dlopen ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_lib_svld_dlopen=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_lib_svld_dlopen=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5
-echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6; }
-if test $ac_cv_lib_svld_dlopen = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_LIBDL 1
-_ACEOF
-
- LIBADD_DL="-lsvld" libltdl_cv_func_dlopen="yes"
-else
- { echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5
-echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6; }
-if test "${ac_cv_lib_dld_dld_link+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldld $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char dld_link ();
-int
-main ()
-{
-return dld_link ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_lib_dld_dld_link=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_lib_dld_dld_link=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5
-echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6; }
-if test $ac_cv_lib_dld_dld_link = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_DLD 1
-_ACEOF
-
- LIBADD_DL="$LIBADD_DL -ldld"
-else
- { echo "$as_me:$LINENO: checking for _dyld_func_lookup" >&5
-echo $ECHO_N "checking for _dyld_func_lookup... $ECHO_C" >&6; }
-if test "${ac_cv_func__dyld_func_lookup+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-/* Define _dyld_func_lookup to an innocuous variant, in case <limits.h> declares _dyld_func_lookup.
- For example, HP-UX 11i <limits.h> declares gettimeofday. */
-#define _dyld_func_lookup innocuous__dyld_func_lookup
-
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char _dyld_func_lookup (); below.
- Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- <limits.h> exists even on freestanding compilers. */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef _dyld_func_lookup
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char _dyld_func_lookup ();
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined __stub__dyld_func_lookup || defined __stub____dyld_func_lookup
-choke me
-#endif
-
-int
-main ()
-{
-return _dyld_func_lookup ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_func__dyld_func_lookup=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_func__dyld_func_lookup=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_func__dyld_func_lookup" >&5
-echo "${ECHO_T}$ac_cv_func__dyld_func_lookup" >&6; }
-if test $ac_cv_func__dyld_func_lookup = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_DYLD 1
-_ACEOF
-
-fi
-
-
-fi
-
-
-fi
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-
-fi
-
-
-fi
-
-
-fi
-
-
-if test x"$libltdl_cv_func_dlopen" = xyes || test x"$libltdl_cv_lib_dl_dlopen" = xyes
-then
- lt_save_LIBS="$LIBS"
- LIBS="$LIBS $LIBADD_DL"
-
-for ac_func in dlerror
-do
-as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-{ echo "$as_me:$LINENO: checking for $ac_func" >&5
-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; }
-if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
- For example, HP-UX 11i <limits.h> declares gettimeofday. */
-#define $ac_func innocuous_$ac_func
-
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char $ac_func (); below.
- Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- <limits.h> exists even on freestanding compilers. */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef $ac_func
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char $ac_func ();
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined __stub_$ac_func || defined __stub___$ac_func
-choke me
-#endif
-
-int
-main ()
-{
-return $ac_func ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- eval "$as_ac_var=yes"
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- eval "$as_ac_var=no"
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-fi
-ac_res=`eval echo '${'$as_ac_var'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-if test `eval echo '${'$as_ac_var'}'` = yes; then
- cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-done
-
- LIBS="$lt_save_LIBS"
-fi
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-
-{ echo "$as_me:$LINENO: checking for _ prefix in compiled symbols" >&5
-echo $ECHO_N "checking for _ prefix in compiled symbols... $ECHO_C" >&6; }
-if test "${ac_cv_sys_symbol_underscore+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_cv_sys_symbol_underscore=no
- cat > conftest.$ac_ext <<EOF
-void nm_test_func(){}
-int main(){nm_test_func;return 0;}
-EOF
- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
- # Now try to grab the symbols.
- ac_nlist=conftest.nm
- if { (eval echo "$as_me:$LINENO: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $ac_nlist\"") >&5
- (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $ac_nlist) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && test -s "$ac_nlist"; then
- # See whether the symbols have a leading underscore.
- if grep '^. _nm_test_func' "$ac_nlist" >/dev/null; then
- ac_cv_sys_symbol_underscore=yes
- else
- if grep '^. nm_test_func ' "$ac_nlist" >/dev/null; then
- :
- else
- echo "configure: cannot find nm_test_func in $ac_nlist" >&5
- fi
- fi
- else
- echo "configure: cannot run $lt_cv_sys_global_symbol_pipe" >&5
- fi
- else
- echo "configure: failed program was:" >&5
- cat conftest.c >&5
- fi
- rm -rf conftest*
-
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_sys_symbol_underscore" >&5
-echo "${ECHO_T}$ac_cv_sys_symbol_underscore" >&6; }
-
-
-if test x"$ac_cv_sys_symbol_underscore" = xyes; then
- if test x"$libltdl_cv_func_dlopen" = xyes ||
- test x"$libltdl_cv_lib_dl_dlopen" = xyes ; then
- { echo "$as_me:$LINENO: checking whether we have to add an underscore for dlsym" >&5
-echo $ECHO_N "checking whether we have to add an underscore for dlsym... $ECHO_C" >&6; }
-if test "${libltdl_cv_need_uscore+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- libltdl_cv_need_uscore=unknown
- save_LIBS="$LIBS"
- LIBS="$LIBS $LIBADD_DL"
- if test "$cross_compiling" = yes; then :
- libltdl_cv_need_uscore=cross
-else
- lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
- lt_status=$lt_dlunknown
- cat > conftest.$ac_ext <<EOF
-#line 10538 "configure"
-#include "confdefs.h"
-
-#if HAVE_DLFCN_H
-#include <dlfcn.h>
-#endif
-
-#include <stdio.h>
-
-#ifdef RTLD_GLOBAL
-# define LT_DLGLOBAL RTLD_GLOBAL
-#else
-# ifdef DL_GLOBAL
-# define LT_DLGLOBAL DL_GLOBAL
-# else
-# define LT_DLGLOBAL 0
-# endif
-#endif
-
-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
- find out it does not work in some platform. */
-#ifndef LT_DLLAZY_OR_NOW
-# ifdef RTLD_LAZY
-# define LT_DLLAZY_OR_NOW RTLD_LAZY
-# else
-# ifdef DL_LAZY
-# define LT_DLLAZY_OR_NOW DL_LAZY
-# else
-# ifdef RTLD_NOW
-# define LT_DLLAZY_OR_NOW RTLD_NOW
-# else
-# ifdef DL_NOW
-# define LT_DLLAZY_OR_NOW DL_NOW
-# else
-# define LT_DLLAZY_OR_NOW 0
-# endif
-# endif
-# endif
-# endif
-#endif
-
-#ifdef __cplusplus
-extern "C" void exit (int);
-#endif
-
-void fnord() { int i=42;}
-int main ()
-{
- void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
- int status = $lt_dlunknown;
-
- if (self)
- {
- if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
- else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
- /* dlclose (self); */
- }
- else
- puts (dlerror ());
-
- exit (status);
-}
-EOF
- if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
- (./conftest; exit; ) >&5 2>/dev/null
- lt_status=$?
- case x$lt_status in
- x$lt_dlno_uscore) libltdl_cv_need_uscore=no ;;
- x$lt_dlneed_uscore) libltdl_cv_need_uscore=yes ;;
- x$lt_dlunknown|x*) ;;
- esac
- else :
- # compilation failed
-
- fi
-fi
-rm -fr conftest*
-
- LIBS="$save_LIBS"
-
-fi
-{ echo "$as_me:$LINENO: result: $libltdl_cv_need_uscore" >&5
-echo "${ECHO_T}$libltdl_cv_need_uscore" >&6; }
- fi
-fi
-
-if test x"$libltdl_cv_need_uscore" = xyes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define NEED_USCORE 1
-_ACEOF
-
-fi
-
-
-{ echo "$as_me:$LINENO: checking whether deplibs are loaded by dlopen" >&5
-echo $ECHO_N "checking whether deplibs are loaded by dlopen... $ECHO_C" >&6; }
-if test "${libltdl_cv_sys_dlopen_deplibs+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- # PORTME does your system automatically load deplibs for dlopen?
- # or its logical equivalent (e.g. shl_load for HP-UX < 11)
- # For now, we just catch OSes we know something about -- in the
- # future, we'll try test this programmatically.
- libltdl_cv_sys_dlopen_deplibs=unknown
- case "$host_os" in
- aix3*|aix4.1.*|aix4.2.*)
- # Unknown whether this is true for these versions of AIX, but
- # we want this `case' here to explicitly catch those versions.
- libltdl_cv_sys_dlopen_deplibs=unknown
- ;;
- aix[45]*)
- libltdl_cv_sys_dlopen_deplibs=yes
- ;;
- darwin*)
- # Assuming the user has installed a libdl from somewhere, this is true
- # If you are looking for one http://www.opendarwin.org/projects/dlcompat
- libltdl_cv_sys_dlopen_deplibs=yes
- ;;
- gnu* | linux* | kfreebsd*-gnu | knetbsd*-gnu)
- # GNU and its variants, using gnu ld.so (Glibc)
- libltdl_cv_sys_dlopen_deplibs=yes
- ;;
- hpux10*|hpux11*)
- libltdl_cv_sys_dlopen_deplibs=yes
- ;;
- interix*)
- libltdl_cv_sys_dlopen_deplibs=yes
- ;;
- irix[12345]*|irix6.[01]*)
- # Catch all versions of IRIX before 6.2, and indicate that we don't
- # know how it worked for any of those versions.
- libltdl_cv_sys_dlopen_deplibs=unknown
- ;;
- irix*)
- # The case above catches anything before 6.2, and it's known that
- # at 6.2 and later dlopen does load deplibs.
- libltdl_cv_sys_dlopen_deplibs=yes
- ;;
- netbsd*)
- libltdl_cv_sys_dlopen_deplibs=yes
- ;;
- openbsd*)
- libltdl_cv_sys_dlopen_deplibs=yes
- ;;
- osf[1234]*)
- # dlopen did load deplibs (at least at 4.x), but until the 5.x series,
- # it did *not* use an RPATH in a shared library to find objects the
- # library depends on, so we explicitly say `no'.
- libltdl_cv_sys_dlopen_deplibs=no
- ;;
- osf5.0|osf5.0a|osf5.1)
- # dlopen *does* load deplibs and with the right loader patch applied
- # it even uses RPATH in a shared library to search for shared objects
- # that the library depends on, but there's no easy way to know if that
- # patch is installed. Since this is the case, all we can really
- # say is unknown -- it depends on the patch being installed. If
- # it is, this changes to `yes'. Without it, it would be `no'.
- libltdl_cv_sys_dlopen_deplibs=unknown
- ;;
- osf*)
- # the two cases above should catch all versions of osf <= 5.1. Read
- # the comments above for what we know about them.
- # At > 5.1, deplibs are loaded *and* any RPATH in a shared library
- # is used to find them so we can finally say `yes'.
- libltdl_cv_sys_dlopen_deplibs=yes
- ;;
- solaris*)
- libltdl_cv_sys_dlopen_deplibs=yes
- ;;
- sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
- libltdl_cv_sys_dlopen_deplibs=yes
- ;;
- esac
-
-fi
-{ echo "$as_me:$LINENO: result: $libltdl_cv_sys_dlopen_deplibs" >&5
-echo "${ECHO_T}$libltdl_cv_sys_dlopen_deplibs" >&6; }
-if test "$libltdl_cv_sys_dlopen_deplibs" != yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define LTDL_DLOPEN_DEPLIBS 1
-_ACEOF
-
-fi
-
-
-for ac_header in argz.h
-do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- { echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-else
- # Is the header compilable?
-{ echo "$as_me:$LINENO: checking $ac_header usability" >&5
-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_header_compiler=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_header_compiler=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-echo "${ECHO_T}$ac_header_compiler" >&6; }
-
-# Is the header present?
-{ echo "$as_me:$LINENO: checking $ac_header presence" >&5
-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <$ac_header>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
- ac_header_preproc=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_header_preproc=no
-fi
-
-rm -f conftest.err conftest.$ac_ext
-{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-echo "${ECHO_T}$ac_header_preproc" >&6; }
-
-# So? What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
- yes:no: )
- { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
- ac_header_preproc=yes
- ;;
- no:yes:* )
- { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
-echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
-echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
- ( cat <<\_ASBOX
-## ------------------------------------ ##
-## Report this to http://llvm.org/bugs/ ##
-## ------------------------------------ ##
-_ASBOX
- ) | sed "s/^/$as_me: WARNING: /" >&2
- ;;
-esac
-{ echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- eval "$as_ac_Header=\$ac_header_preproc"
-fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-
-fi
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
- cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-
-done
-
-
-{ echo "$as_me:$LINENO: checking for error_t" >&5
-echo $ECHO_N "checking for error_t... $ECHO_C" >&6; }
-if test "${ac_cv_type_error_t+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#if HAVE_ARGZ_H
-# include <argz.h>
-#endif
-
-typedef error_t ac__type_new_;
-int
-main ()
-{
-if ((ac__type_new_ *) 0)
- return 0;
-if (sizeof (ac__type_new_))
- return 0;
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_type_error_t=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_type_error_t=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_type_error_t" >&5
-echo "${ECHO_T}$ac_cv_type_error_t" >&6; }
-if test $ac_cv_type_error_t = yes; then
-
-cat >>confdefs.h <<_ACEOF
-#define HAVE_ERROR_T 1
-_ACEOF
-
-
-else
-
-cat >>confdefs.h <<\_ACEOF
-#define error_t int
-_ACEOF
-
-fi
-
-
-
-
-
-
-
-for ac_func in argz_append argz_create_sep argz_insert argz_next argz_stringify
-do
-as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-{ echo "$as_me:$LINENO: checking for $ac_func" >&5
-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; }
-if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
- For example, HP-UX 11i <limits.h> declares gettimeofday. */
-#define $ac_func innocuous_$ac_func
-
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char $ac_func (); below.
- Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- <limits.h> exists even on freestanding compilers. */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef $ac_func
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char $ac_func ();
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined __stub_$ac_func || defined __stub___$ac_func
-choke me
-#endif
-
-int
-main ()
-{
-return $ac_func ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- eval "$as_ac_var=yes"
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- eval "$as_ac_var=no"
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-fi
-ac_res=`eval echo '${'$as_ac_var'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-if test `eval echo '${'$as_ac_var'}'` = yes; then
- cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-done
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-for ac_header in assert.h ctype.h errno.h malloc.h memory.h stdlib.h \
- stdio.h unistd.h
-do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- { echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-else
- # Is the header compilable?
-{ echo "$as_me:$LINENO: checking $ac_header usability" >&5
-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_header_compiler=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_header_compiler=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-echo "${ECHO_T}$ac_header_compiler" >&6; }
-
-# Is the header present?
-{ echo "$as_me:$LINENO: checking $ac_header presence" >&5
-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <$ac_header>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
- ac_header_preproc=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_header_preproc=no
-fi
-
-rm -f conftest.err conftest.$ac_ext
-{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-echo "${ECHO_T}$ac_header_preproc" >&6; }
-
-# So? What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
- yes:no: )
- { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
- ac_header_preproc=yes
- ;;
- no:yes:* )
- { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
-echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
-echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
- ( cat <<\_ASBOX
-## ------------------------------------ ##
-## Report this to http://llvm.org/bugs/ ##
-## ------------------------------------ ##
-_ASBOX
- ) | sed "s/^/$as_me: WARNING: /" >&2
- ;;
-esac
-{ echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- eval "$as_ac_Header=\$ac_header_preproc"
-fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-
-fi
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
- cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-
-done
-
-
-
-
-
-for ac_header in dl.h sys/dl.h dld.h mach-o/dyld.h
-do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- { echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-else
- # Is the header compilable?
-{ echo "$as_me:$LINENO: checking $ac_header usability" >&5
-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_header_compiler=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_header_compiler=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-echo "${ECHO_T}$ac_header_compiler" >&6; }
-
-# Is the header present?
-{ echo "$as_me:$LINENO: checking $ac_header presence" >&5
-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <$ac_header>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
- ac_header_preproc=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_header_preproc=no
-fi
-
-rm -f conftest.err conftest.$ac_ext
-{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-echo "${ECHO_T}$ac_header_preproc" >&6; }
-
-# So? What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
- yes:no: )
- { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
- ac_header_preproc=yes
- ;;
- no:yes:* )
- { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
-echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
-echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
- ( cat <<\_ASBOX
-## ------------------------------------ ##
-## Report this to http://llvm.org/bugs/ ##
-## ------------------------------------ ##
-_ASBOX
- ) | sed "s/^/$as_me: WARNING: /" >&2
- ;;
-esac
-{ echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- eval "$as_ac_Header=\$ac_header_preproc"
-fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-
-fi
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
- cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-
-done
-
-
-
-for ac_header in string.h strings.h
-do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- { echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-else
- # Is the header compilable?
-{ echo "$as_me:$LINENO: checking $ac_header usability" >&5
-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_header_compiler=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_header_compiler=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-echo "${ECHO_T}$ac_header_compiler" >&6; }
-
-# Is the header present?
-{ echo "$as_me:$LINENO: checking $ac_header presence" >&5
-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <$ac_header>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
- ac_header_preproc=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_header_preproc=no
-fi
-
-rm -f conftest.err conftest.$ac_ext
-{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-echo "${ECHO_T}$ac_header_preproc" >&6; }
-
-# So? What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
- yes:no: )
- { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
- ac_header_preproc=yes
- ;;
- no:yes:* )
- { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
-echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
-echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
- ( cat <<\_ASBOX
-## ------------------------------------ ##
-## Report this to http://llvm.org/bugs/ ##
-## ------------------------------------ ##
-_ASBOX
- ) | sed "s/^/$as_me: WARNING: /" >&2
- ;;
-esac
-{ echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- eval "$as_ac_Header=\$ac_header_preproc"
-fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-
-fi
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
- cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
- break
-fi
-
-done
-
-
-
-
-for ac_func in strchr index
-do
-as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-{ echo "$as_me:$LINENO: checking for $ac_func" >&5
-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; }
-if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
- For example, HP-UX 11i <limits.h> declares gettimeofday. */
-#define $ac_func innocuous_$ac_func
-
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char $ac_func (); below.
- Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- <limits.h> exists even on freestanding compilers. */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef $ac_func
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char $ac_func ();
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined __stub_$ac_func || defined __stub___$ac_func
-choke me
-#endif
-
-int
-main ()
-{
-return $ac_func ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- eval "$as_ac_var=yes"
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- eval "$as_ac_var=no"
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-fi
-ac_res=`eval echo '${'$as_ac_var'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-if test `eval echo '${'$as_ac_var'}'` = yes; then
- cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-_ACEOF
- break
-fi
-done
-
-
-
-for ac_func in strrchr rindex
-do
-as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-{ echo "$as_me:$LINENO: checking for $ac_func" >&5
-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; }
-if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
- For example, HP-UX 11i <limits.h> declares gettimeofday. */
-#define $ac_func innocuous_$ac_func
-
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char $ac_func (); below.
- Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- <limits.h> exists even on freestanding compilers. */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef $ac_func
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char $ac_func ();
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined __stub_$ac_func || defined __stub___$ac_func
-choke me
-#endif
-
-int
-main ()
-{
-return $ac_func ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- eval "$as_ac_var=yes"
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- eval "$as_ac_var=no"
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-fi
-ac_res=`eval echo '${'$as_ac_var'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-if test `eval echo '${'$as_ac_var'}'` = yes; then
- cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-_ACEOF
- break
-fi
-done
-
-
-
-for ac_func in memcpy bcopy
-do
-as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-{ echo "$as_me:$LINENO: checking for $ac_func" >&5
-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; }
-if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
- For example, HP-UX 11i <limits.h> declares gettimeofday. */
-#define $ac_func innocuous_$ac_func
-
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char $ac_func (); below.
- Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- <limits.h> exists even on freestanding compilers. */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef $ac_func
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char $ac_func ();
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined __stub_$ac_func || defined __stub___$ac_func
-choke me
-#endif
-
-int
-main ()
-{
-return $ac_func ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- eval "$as_ac_var=yes"
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- eval "$as_ac_var=no"
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-fi
-ac_res=`eval echo '${'$as_ac_var'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-if test `eval echo '${'$as_ac_var'}'` = yes; then
- cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-_ACEOF
- break
-fi
-done
-
-
-
-for ac_func in memmove strcmp
-do
-as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-{ echo "$as_me:$LINENO: checking for $ac_func" >&5
-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; }
-if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
- For example, HP-UX 11i <limits.h> declares gettimeofday. */
-#define $ac_func innocuous_$ac_func
-
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char $ac_func (); below.
- Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- <limits.h> exists even on freestanding compilers. */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef $ac_func
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char $ac_func ();
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined __stub_$ac_func || defined __stub___$ac_func
-choke me
-#endif
-
-int
-main ()
-{
-return $ac_func ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- eval "$as_ac_var=yes"
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- eval "$as_ac_var=no"
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-fi
-ac_res=`eval echo '${'$as_ac_var'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-if test `eval echo '${'$as_ac_var'}'` = yes; then
- cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-done
-
-
-
-
-for ac_func in closedir opendir readdir
-do
-as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-{ echo "$as_me:$LINENO: checking for $ac_func" >&5
-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; }
-if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
- For example, HP-UX 11i <limits.h> declares gettimeofday. */
-#define $ac_func innocuous_$ac_func
-
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char $ac_func (); below.
- Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- <limits.h> exists even on freestanding compilers. */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef $ac_func
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char $ac_func ();
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined __stub_$ac_func || defined __stub___$ac_func
-choke me
-#endif
-
-int
-main ()
-{
-return $ac_func ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- eval "$as_ac_var=yes"
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- eval "$as_ac_var=no"
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-fi
-ac_res=`eval echo '${'$as_ac_var'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-if test `eval echo '${'$as_ac_var'}'` = yes; then
- cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-done
-
-
-
-{ echo "$as_me:$LINENO: checking tool compatibility" >&5
-echo $ECHO_N "checking tool compatibility... $ECHO_C" >&6; }
-
-ICC=no
-IXX=no
-case $CC in
- icc*|icpc*)
- ICC=yes
- IXX=yes
- ;;
- *)
- ;;
-esac
-
-if test "$GCC" != "yes" && test "$ICC" != "yes"
-then
- { { echo "$as_me:$LINENO: error: gcc|icc required but not found" >&5
-echo "$as_me: error: gcc|icc required but not found" >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-if test "$GXX" != "yes" && test "$IXX" != "yes"
-then
- { { echo "$as_me:$LINENO: error: g++|clang++|icc required but not found" >&5
-echo "$as_me: error: g++|clang++|icc required but not found" >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-if test "$GCC" = "yes"
-then
- cat >conftest.$ac_ext <<_ACEOF
-
- /* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
- #if !defined(__GNUC__) || __GNUC__ < 3
- #error Unsupported GCC version
- #endif
-
-
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- :
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- { { echo "$as_me:$LINENO: error: gcc 3.x required, but you have a lower version" >&5
-echo "$as_me: error: gcc 3.x required, but you have a lower version" >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-
-if test -z "$llvm_cv_gnu_make_command"
-then
- { { echo "$as_me:$LINENO: error: GNU Make required but not found" >&5
-echo "$as_me: error: GNU Make required but not found" >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-{ echo "$as_me:$LINENO: result: ok" >&5
-echo "${ECHO_T}ok" >&6; }
-
-{ echo "$as_me:$LINENO: checking optional compiler flags" >&5
-echo $ECHO_N "checking optional compiler flags... $ECHO_C" >&6; }
-NO_VARIADIC_MACROS=`$CXX -Werror -Wvariadic-macros -fsyntax-only -xc /dev/null 2>/dev/null && echo -Wno-variadic-macros`
-
-NO_MISSING_FIELD_INITIALIZERS=`$CXX -Werror -Wmissing-field-initializers -fsyntax-only -xc /dev/null 2>/dev/null && echo -Wno-missing-field-initializers`
-
-COVERED_SWITCH_DEFAULT=`$CXX -Werror -Wcovered-switch-default -fsyntax-only -xc /dev/null 2>/dev/null && echo -Wcovered-switch-default`
-
-
-NO_UNINITIALIZED=
-NO_MAYBE_UNINITIALIZED=
-if test "$GXX" = "yes"
-then
- NO_MAYBE_UNINITIALIZED=`$CXX -Werror -Wmaybe-uninitialized -fsyntax-only -xc /dev/null 2>/dev/null && echo -Wno-maybe-uninitialized`
-
- if test -z "$NO_MAYBE_UNINITIALIZED"
- then
- NO_UNINITIALIZED=`$CXX -Werror -Wuninitialized -fsyntax-only -xc /dev/null 2>/dev/null && echo -Wno-uninitialized`
-
- fi
-fi
-{ echo "$as_me:$LINENO: result: $NO_VARIADIC_MACROS $NO_MISSING_FIELD_INITIALIZERS $COVERED_SWITCH_DEFAULT $NO_UNINITIALIZED $NO_MAYBE_UNINITIALIZED" >&5
-echo "${ECHO_T}$NO_VARIADIC_MACROS $NO_MISSING_FIELD_INITIALIZERS $COVERED_SWITCH_DEFAULT $NO_UNINITIALIZED $NO_MAYBE_UNINITIALIZED" >&6; }
-
-
-# Check whether --with-python was given.
-if test "${with_python+set}" = set; then
- withval=$with_python; PYTHON="$withval"
-fi
-
-
-if test -n "$PYTHON" && test -x "$PYTHON" ; then
- { echo "$as_me:$LINENO: checking for python" >&5
-echo $ECHO_N "checking for python... $ECHO_C" >&6; }
- { echo "$as_me:$LINENO: result: user defined: $with_python" >&5
-echo "${ECHO_T}user defined: $with_python" >&6; }
-else
- if test -n "$PYTHON" ; then
- { echo "$as_me:$LINENO: WARNING: specified python ($PYTHON) is not usable, searching path" >&5
-echo "$as_me: WARNING: specified python ($PYTHON) is not usable, searching path" >&2;}
- fi
-
- # Extract the first word of "python python2 python26", so it can be a program name with args.
-set dummy python python2 python26; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_path_PYTHON+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- case $PYTHON in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_PYTHON="$PYTHON" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_PYTHON="$as_dir/$ac_word$ac_exec_ext"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
- test -z "$ac_cv_path_PYTHON" && ac_cv_path_PYTHON="{ echo "$as_me:$LINENO: result: not found" >&5
-echo "${ECHO_T}not found" >&6; }
- { { echo "$as_me:$LINENO: error: could not find python 2.5 or higher" >&5
-echo "$as_me: error: could not find python 2.5 or higher" >&2;}
- { (exit 1); exit 1; }; }"
- ;;
-esac
-fi
-PYTHON=$ac_cv_path_PYTHON
-if test -n "$PYTHON"; then
- { echo "$as_me:$LINENO: result: $PYTHON" >&5
-echo "${ECHO_T}$PYTHON" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-fi
-
-{ echo "$as_me:$LINENO: checking for python >= 2.5" >&5
-echo $ECHO_N "checking for python >= 2.5... $ECHO_C" >&6; }
-ac_python_version=`$PYTHON -c 'import sys; print sys.version.split()[0]'`
-ac_python_version_major=`echo $ac_python_version | cut -d'.' -f1`
-ac_python_version_minor=`echo $ac_python_version | cut -d'.' -f2`
-ac_python_version_patch=`echo $ac_python_version | cut -d'.' -f3`
-if test "$ac_python_version_major" -eq "2" \
- && test "$ac_python_version_minor" -ge "5" ; then
- { echo "$as_me:$LINENO: result: $PYTHON ($ac_python_version)" >&5
-echo "${ECHO_T}$PYTHON ($ac_python_version)" >&6; }
-else
- { echo "$as_me:$LINENO: result: not found" >&5
-echo "${ECHO_T}not found" >&6; }
- { { echo "$as_me:$LINENO: error: found python $ac_python_version ($PYTHON); required >= 2.5
-See \`config.log' for more details." >&5
-echo "$as_me: error: found python $ac_python_version ($PYTHON); required >= 2.5
-See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-
-
-{ echo "$as_me:$LINENO: checking for sin in -lm" >&5
-echo $ECHO_N "checking for sin in -lm... $ECHO_C" >&6; }
-if test "${ac_cv_lib_m_sin+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-lm $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char sin ();
-int
-main ()
-{
-return sin ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_lib_m_sin=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_lib_m_sin=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_lib_m_sin" >&5
-echo "${ECHO_T}$ac_cv_lib_m_sin" >&6; }
-if test $ac_cv_lib_m_sin = yes; then
- cat >>confdefs.h <<_ACEOF
-#define HAVE_LIBM 1
-_ACEOF
-
- LIBS="-lm $LIBS"
-
-fi
-
-if test "$llvm_cv_os_type" = "MingW" ; then
-
-{ echo "$as_me:$LINENO: checking for main in -limagehlp" >&5
-echo $ECHO_N "checking for main in -limagehlp... $ECHO_C" >&6; }
-if test "${ac_cv_lib_imagehlp_main+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-limagehlp $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-
-int
-main ()
-{
-return main ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_lib_imagehlp_main=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_lib_imagehlp_main=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_lib_imagehlp_main" >&5
-echo "${ECHO_T}$ac_cv_lib_imagehlp_main" >&6; }
-if test $ac_cv_lib_imagehlp_main = yes; then
- cat >>confdefs.h <<_ACEOF
-#define HAVE_LIBIMAGEHLP 1
-_ACEOF
-
- LIBS="-limagehlp $LIBS"
-
-fi
-
-
-{ echo "$as_me:$LINENO: checking for main in -lpsapi" >&5
-echo $ECHO_N "checking for main in -lpsapi... $ECHO_C" >&6; }
-if test "${ac_cv_lib_psapi_main+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-lpsapi $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-
-int
-main ()
-{
-return main ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_lib_psapi_main=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_lib_psapi_main=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_lib_psapi_main" >&5
-echo "${ECHO_T}$ac_cv_lib_psapi_main" >&6; }
-if test $ac_cv_lib_psapi_main = yes; then
- cat >>confdefs.h <<_ACEOF
-#define HAVE_LIBPSAPI 1
-_ACEOF
-
- LIBS="-lpsapi $LIBS"
-
-fi
-
-fi
-
-{ echo "$as_me:$LINENO: checking for library containing dlopen" >&5
-echo $ECHO_N "checking for library containing dlopen... $ECHO_C" >&6; }
-if test "${ac_cv_search_dlopen+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_func_search_save_LIBS=$LIBS
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char dlopen ();
-int
-main ()
-{
-return dlopen ();
- ;
- return 0;
-}
-_ACEOF
-for ac_lib in '' dl; do
- if test -z "$ac_lib"; then
- ac_res="none required"
- else
- ac_res=-l$ac_lib
- LIBS="-l$ac_lib $ac_func_search_save_LIBS"
- fi
- rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_search_dlopen=$ac_res
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext
- if test "${ac_cv_search_dlopen+set}" = set; then
- break
-fi
-done
-if test "${ac_cv_search_dlopen+set}" = set; then
- :
-else
- ac_cv_search_dlopen=no
-fi
-rm conftest.$ac_ext
-LIBS=$ac_func_search_save_LIBS
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_search_dlopen" >&5
-echo "${ECHO_T}$ac_cv_search_dlopen" >&6; }
-ac_res=$ac_cv_search_dlopen
-if test "$ac_res" != no; then
- test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_DLOPEN 1
-_ACEOF
-
-else
- { echo "$as_me:$LINENO: WARNING: dlopen() not found - disabling plugin support" >&5
-echo "$as_me: WARNING: dlopen() not found - disabling plugin support" >&2;}
-fi
-
-
-{ echo "$as_me:$LINENO: checking for library containing clock_gettime" >&5
-echo $ECHO_N "checking for library containing clock_gettime... $ECHO_C" >&6; }
-if test "${ac_cv_search_clock_gettime+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_func_search_save_LIBS=$LIBS
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char clock_gettime ();
-int
-main ()
-{
-return clock_gettime ();
- ;
- return 0;
-}
-_ACEOF
-for ac_lib in '' rt; do
- if test -z "$ac_lib"; then
- ac_res="none required"
- else
- ac_res=-l$ac_lib
- LIBS="-l$ac_lib $ac_func_search_save_LIBS"
- fi
- rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_search_clock_gettime=$ac_res
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext
- if test "${ac_cv_search_clock_gettime+set}" = set; then
- break
-fi
-done
-if test "${ac_cv_search_clock_gettime+set}" = set; then
- :
-else
- ac_cv_search_clock_gettime=no
-fi
-rm conftest.$ac_ext
-LIBS=$ac_func_search_save_LIBS
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_search_clock_gettime" >&5
-echo "${ECHO_T}$ac_cv_search_clock_gettime" >&6; }
-ac_res=$ac_cv_search_clock_gettime
-if test "$ac_res" != no; then
- test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
-
-fi
-
-
-if test "$llvm_cv_enable_libffi" = "yes" ; then
- { echo "$as_me:$LINENO: checking for library containing ffi_call" >&5
-echo $ECHO_N "checking for library containing ffi_call... $ECHO_C" >&6; }
-if test "${ac_cv_search_ffi_call+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_func_search_save_LIBS=$LIBS
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char ffi_call ();
-int
-main ()
-{
-return ffi_call ();
- ;
- return 0;
-}
-_ACEOF
-for ac_lib in '' ffi; do
- if test -z "$ac_lib"; then
- ac_res="none required"
- else
- ac_res=-l$ac_lib
- LIBS="-l$ac_lib $ac_func_search_save_LIBS"
- fi
- rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_search_ffi_call=$ac_res
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext
- if test "${ac_cv_search_ffi_call+set}" = set; then
- break
-fi
-done
-if test "${ac_cv_search_ffi_call+set}" = set; then
- :
-else
- ac_cv_search_ffi_call=no
-fi
-rm conftest.$ac_ext
-LIBS=$ac_func_search_save_LIBS
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_search_ffi_call" >&5
-echo "${ECHO_T}$ac_cv_search_ffi_call" >&6; }
-ac_res=$ac_cv_search_ffi_call
-if test "$ac_res" != no; then
- test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_FFI_CALL 1
-_ACEOF
-
-else
- { { echo "$as_me:$LINENO: error: libffi not found - configure without --enable-libffi to compile without it" >&5
-echo "$as_me: error: libffi not found - configure without --enable-libffi to compile without it" >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-fi
-
-{ echo "$as_me:$LINENO: checking for library containing mallinfo" >&5
-echo $ECHO_N "checking for library containing mallinfo... $ECHO_C" >&6; }
-if test "${ac_cv_search_mallinfo+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_func_search_save_LIBS=$LIBS
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char mallinfo ();
-int
-main ()
-{
-return mallinfo ();
- ;
- return 0;
-}
-_ACEOF
-for ac_lib in '' malloc; do
- if test -z "$ac_lib"; then
- ac_res="none required"
- else
- ac_res=-l$ac_lib
- LIBS="-l$ac_lib $ac_func_search_save_LIBS"
- fi
- rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_search_mallinfo=$ac_res
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext
- if test "${ac_cv_search_mallinfo+set}" = set; then
- break
-fi
-done
-if test "${ac_cv_search_mallinfo+set}" = set; then
- :
-else
- ac_cv_search_mallinfo=no
-fi
-rm conftest.$ac_ext
-LIBS=$ac_func_search_save_LIBS
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_search_mallinfo" >&5
-echo "${ECHO_T}$ac_cv_search_mallinfo" >&6; }
-ac_res=$ac_cv_search_mallinfo
-if test "$ac_res" != no; then
- test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_MALLINFO 1
-_ACEOF
-
-fi
-
-
-if test "$LLVM_ENABLE_THREADS" -eq 1 && test "$ENABLE_PTHREADS" -eq 1 ; then
-
-{ echo "$as_me:$LINENO: checking for pthread_mutex_init in -lpthread" >&5
-echo $ECHO_N "checking for pthread_mutex_init in -lpthread... $ECHO_C" >&6; }
-if test "${ac_cv_lib_pthread_pthread_mutex_init+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-lpthread $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char pthread_mutex_init ();
-int
-main ()
-{
-return pthread_mutex_init ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_lib_pthread_pthread_mutex_init=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_lib_pthread_pthread_mutex_init=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_lib_pthread_pthread_mutex_init" >&5
-echo "${ECHO_T}$ac_cv_lib_pthread_pthread_mutex_init" >&6; }
-if test $ac_cv_lib_pthread_pthread_mutex_init = yes; then
- cat >>confdefs.h <<_ACEOF
-#define HAVE_LIBPTHREAD 1
-_ACEOF
-
- LIBS="-lpthread $LIBS"
-
-fi
-
- { echo "$as_me:$LINENO: checking for library containing pthread_mutex_lock" >&5
-echo $ECHO_N "checking for library containing pthread_mutex_lock... $ECHO_C" >&6; }
-if test "${ac_cv_search_pthread_mutex_lock+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_func_search_save_LIBS=$LIBS
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char pthread_mutex_lock ();
-int
-main ()
-{
-return pthread_mutex_lock ();
- ;
- return 0;
-}
-_ACEOF
-for ac_lib in '' pthread; do
- if test -z "$ac_lib"; then
- ac_res="none required"
- else
- ac_res=-l$ac_lib
- LIBS="-l$ac_lib $ac_func_search_save_LIBS"
- fi
- rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_search_pthread_mutex_lock=$ac_res
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext
- if test "${ac_cv_search_pthread_mutex_lock+set}" = set; then
- break
-fi
-done
-if test "${ac_cv_search_pthread_mutex_lock+set}" = set; then
- :
-else
- ac_cv_search_pthread_mutex_lock=no
-fi
-rm conftest.$ac_ext
-LIBS=$ac_func_search_save_LIBS
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_search_pthread_mutex_lock" >&5
-echo "${ECHO_T}$ac_cv_search_pthread_mutex_lock" >&6; }
-ac_res=$ac_cv_search_pthread_mutex_lock
-if test "$ac_res" != no; then
- test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_PTHREAD_MUTEX_LOCK 1
-_ACEOF
-
-fi
-
- { echo "$as_me:$LINENO: checking for library containing pthread_rwlock_init" >&5
-echo $ECHO_N "checking for library containing pthread_rwlock_init... $ECHO_C" >&6; }
-if test "${ac_cv_search_pthread_rwlock_init+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_func_search_save_LIBS=$LIBS
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char pthread_rwlock_init ();
-int
-main ()
-{
-return pthread_rwlock_init ();
- ;
- return 0;
-}
-_ACEOF
-for ac_lib in '' pthread; do
- if test -z "$ac_lib"; then
- ac_res="none required"
- else
- ac_res=-l$ac_lib
- LIBS="-l$ac_lib $ac_func_search_save_LIBS"
- fi
- rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_search_pthread_rwlock_init=$ac_res
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext
- if test "${ac_cv_search_pthread_rwlock_init+set}" = set; then
- break
-fi
-done
-if test "${ac_cv_search_pthread_rwlock_init+set}" = set; then
- :
-else
- ac_cv_search_pthread_rwlock_init=no
-fi
-rm conftest.$ac_ext
-LIBS=$ac_func_search_save_LIBS
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_search_pthread_rwlock_init" >&5
-echo "${ECHO_T}$ac_cv_search_pthread_rwlock_init" >&6; }
-ac_res=$ac_cv_search_pthread_rwlock_init
-if test "$ac_res" != no; then
- test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_PTHREAD_RWLOCK_INIT 1
-_ACEOF
-
-fi
-
- { echo "$as_me:$LINENO: checking for library containing pthread_getspecific" >&5
-echo $ECHO_N "checking for library containing pthread_getspecific... $ECHO_C" >&6; }
-if test "${ac_cv_search_pthread_getspecific+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_func_search_save_LIBS=$LIBS
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char pthread_getspecific ();
-int
-main ()
-{
-return pthread_getspecific ();
- ;
- return 0;
-}
-_ACEOF
-for ac_lib in '' pthread; do
- if test -z "$ac_lib"; then
- ac_res="none required"
- else
- ac_res=-l$ac_lib
- LIBS="-l$ac_lib $ac_func_search_save_LIBS"
- fi
- rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_search_pthread_getspecific=$ac_res
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext
- if test "${ac_cv_search_pthread_getspecific+set}" = set; then
- break
-fi
-done
-if test "${ac_cv_search_pthread_getspecific+set}" = set; then
- :
-else
- ac_cv_search_pthread_getspecific=no
-fi
-rm conftest.$ac_ext
-LIBS=$ac_func_search_save_LIBS
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_search_pthread_getspecific" >&5
-echo "${ECHO_T}$ac_cv_search_pthread_getspecific" >&6; }
-ac_res=$ac_cv_search_pthread_getspecific
-if test "$ac_res" != no; then
- test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_PTHREAD_GETSPECIFIC 1
-_ACEOF
-
-fi
-
-fi
-
-if test "$LLVM_ENABLE_ZLIB" -eq 1 ; then
-
-{ echo "$as_me:$LINENO: checking for compress2 in -lz" >&5
-echo $ECHO_N "checking for compress2 in -lz... $ECHO_C" >&6; }
-if test "${ac_cv_lib_z_compress2+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-lz $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char compress2 ();
-int
-main ()
-{
-return compress2 ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_lib_z_compress2=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_lib_z_compress2=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_lib_z_compress2" >&5
-echo "${ECHO_T}$ac_cv_lib_z_compress2" >&6; }
-if test $ac_cv_lib_z_compress2 = yes; then
- cat >>confdefs.h <<_ACEOF
-#define HAVE_LIBZ 1
-_ACEOF
-
- LIBS="-lz $LIBS"
-
-fi
-
-fi
-
-
-# Check whether --with-udis86 was given.
-if test "${with_udis86+set}" = set; then
- withval=$with_udis86;
- USE_UDIS86=1
-
- case "$withval" in
- /usr/lib|yes) ;;
- *) LDFLAGS="$LDFLAGS -L${withval}" ;;
- esac
-
-{ echo "$as_me:$LINENO: checking for ud_init in -ludis86" >&5
-echo $ECHO_N "checking for ud_init in -ludis86... $ECHO_C" >&6; }
-if test "${ac_cv_lib_udis86_ud_init+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-ludis86 $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char ud_init ();
-int
-main ()
-{
-return ud_init ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_lib_udis86_ud_init=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_lib_udis86_ud_init=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_lib_udis86_ud_init" >&5
-echo "${ECHO_T}$ac_cv_lib_udis86_ud_init" >&6; }
-if test $ac_cv_lib_udis86_ud_init = yes; then
- cat >>confdefs.h <<_ACEOF
-#define HAVE_LIBUDIS86 1
-_ACEOF
-
- LIBS="-ludis86 $LIBS"
-
-else
-
- echo "Error! You need to have libudis86 around."
- exit -1
-
-fi
-
-
-else
- USE_UDIS86=0
-
-fi
-
-
-cat >>confdefs.h <<_ACEOF
-#define USE_UDIS86 $USE_UDIS86
-_ACEOF
-
-
-
-# Check whether --with-oprofile was given.
-if test "${with_oprofile+set}" = set; then
- withval=$with_oprofile;
- USE_OPROFILE=1
-
- case "$withval" in
- /usr|yes) llvm_cv_oppath=/usr/lib/oprofile ;;
- no) llvm_cv_oppath=
- USE_OPROFILE=0
- ;;
- *) llvm_cv_oppath="${withval}/lib/oprofile"
- CPPFLAGS="-I${withval}/include";;
- esac
- case $llvm_cv_os_type in
- Linux)
- if test -n "$llvm_cv_oppath" ; then
- LIBS="$LIBS -lopagent -L${llvm_cv_oppath} -Wl,-rpath,${llvm_cv_oppath}"
- { echo "$as_me:$LINENO: checking for library containing bfd_init" >&5
-echo $ECHO_N "checking for library containing bfd_init... $ECHO_C" >&6; }
-if test "${ac_cv_search_bfd_init+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_func_search_save_LIBS=$LIBS
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char bfd_init ();
-int
-main ()
-{
-return bfd_init ();
- ;
- return 0;
-}
-_ACEOF
-for ac_lib in '' bfd; do
- if test -z "$ac_lib"; then
- ac_res="none required"
- else
- ac_res=-l$ac_lib
- LIBS="-l$ac_lib $ac_func_search_save_LIBS"
- fi
- rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_search_bfd_init=$ac_res
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext
- if test "${ac_cv_search_bfd_init+set}" = set; then
- break
-fi
-done
-if test "${ac_cv_search_bfd_init+set}" = set; then
- :
-else
- ac_cv_search_bfd_init=no
-fi
-rm conftest.$ac_ext
-LIBS=$ac_func_search_save_LIBS
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_search_bfd_init" >&5
-echo "${ECHO_T}$ac_cv_search_bfd_init" >&6; }
-ac_res=$ac_cv_search_bfd_init
-if test "$ac_res" != no; then
- test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
-
-fi
-
- { echo "$as_me:$LINENO: checking for library containing op_open_agent" >&5
-echo $ECHO_N "checking for library containing op_open_agent... $ECHO_C" >&6; }
-if test "${ac_cv_search_op_open_agent+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_func_search_save_LIBS=$LIBS
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char op_open_agent ();
-int
-main ()
-{
-return op_open_agent ();
- ;
- return 0;
-}
-_ACEOF
-for ac_lib in '' opagent; do
- if test -z "$ac_lib"; then
- ac_res="none required"
- else
- ac_res=-l$ac_lib
- LIBS="-l$ac_lib $ac_func_search_save_LIBS"
- fi
- rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_search_op_open_agent=$ac_res
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext
- if test "${ac_cv_search_op_open_agent+set}" = set; then
- break
-fi
-done
-if test "${ac_cv_search_op_open_agent+set}" = set; then
- :
-else
- ac_cv_search_op_open_agent=no
-fi
-rm conftest.$ac_ext
-LIBS=$ac_func_search_save_LIBS
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_search_op_open_agent" >&5
-echo "${ECHO_T}$ac_cv_search_op_open_agent" >&6; }
-ac_res=$ac_cv_search_op_open_agent
-if test "$ac_res" != no; then
- test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
-
-else
-
- echo "Error! You need to have libopagent around."
- exit -1
-
-fi
-
- if test "${ac_cv_header_opagent_h+set}" = set; then
- { echo "$as_me:$LINENO: checking for opagent.h" >&5
-echo $ECHO_N "checking for opagent.h... $ECHO_C" >&6; }
-if test "${ac_cv_header_opagent_h+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_header_opagent_h" >&5
-echo "${ECHO_T}$ac_cv_header_opagent_h" >&6; }
-else
- # Is the header compilable?
-{ echo "$as_me:$LINENO: checking opagent.h usability" >&5
-echo $ECHO_N "checking opagent.h usability... $ECHO_C" >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-#include <opagent.h>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_header_compiler=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_header_compiler=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-echo "${ECHO_T}$ac_header_compiler" >&6; }
-
-# Is the header present?
-{ echo "$as_me:$LINENO: checking opagent.h presence" >&5
-echo $ECHO_N "checking opagent.h presence... $ECHO_C" >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <opagent.h>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
- ac_header_preproc=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_header_preproc=no
-fi
-
-rm -f conftest.err conftest.$ac_ext
-{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-echo "${ECHO_T}$ac_header_preproc" >&6; }
-
-# So? What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
- yes:no: )
- { echo "$as_me:$LINENO: WARNING: opagent.h: accepted by the compiler, rejected by the preprocessor!" >&5
-echo "$as_me: WARNING: opagent.h: accepted by the compiler, rejected by the preprocessor!" >&2;}
- { echo "$as_me:$LINENO: WARNING: opagent.h: proceeding with the compiler's result" >&5
-echo "$as_me: WARNING: opagent.h: proceeding with the compiler's result" >&2;}
- ac_header_preproc=yes
- ;;
- no:yes:* )
- { echo "$as_me:$LINENO: WARNING: opagent.h: present but cannot be compiled" >&5
-echo "$as_me: WARNING: opagent.h: present but cannot be compiled" >&2;}
- { echo "$as_me:$LINENO: WARNING: opagent.h: check for missing prerequisite headers?" >&5
-echo "$as_me: WARNING: opagent.h: check for missing prerequisite headers?" >&2;}
- { echo "$as_me:$LINENO: WARNING: opagent.h: see the Autoconf documentation" >&5
-echo "$as_me: WARNING: opagent.h: see the Autoconf documentation" >&2;}
- { echo "$as_me:$LINENO: WARNING: opagent.h: section \"Present But Cannot Be Compiled\"" >&5
-echo "$as_me: WARNING: opagent.h: section \"Present But Cannot Be Compiled\"" >&2;}
- { echo "$as_me:$LINENO: WARNING: opagent.h: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: opagent.h: proceeding with the preprocessor's result" >&2;}
- { echo "$as_me:$LINENO: WARNING: opagent.h: in the future, the compiler will take precedence" >&5
-echo "$as_me: WARNING: opagent.h: in the future, the compiler will take precedence" >&2;}
- ( cat <<\_ASBOX
-## ------------------------------------ ##
-## Report this to http://llvm.org/bugs/ ##
-## ------------------------------------ ##
-_ASBOX
- ) | sed "s/^/$as_me: WARNING: /" >&2
- ;;
-esac
-{ echo "$as_me:$LINENO: checking for opagent.h" >&5
-echo $ECHO_N "checking for opagent.h... $ECHO_C" >&6; }
-if test "${ac_cv_header_opagent_h+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_cv_header_opagent_h=$ac_header_preproc
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_header_opagent_h" >&5
-echo "${ECHO_T}$ac_cv_header_opagent_h" >&6; }
-
-fi
-if test $ac_cv_header_opagent_h = yes; then
- :
-else
-
- echo "Error! You need to have opagent.h around."
- exit -1
-
-fi
-
-
- fi ;;
- *)
- { { echo "$as_me:$LINENO: error: OProfile support is available on Linux only." >&5
-echo "$as_me: error: OProfile support is available on Linux only." >&2;}
- { (exit 1); exit 1; }; } ;;
- esac
-
-else
-
- USE_OPROFILE=0
-
-
-fi
-
-
-cat >>confdefs.h <<_ACEOF
-#define LLVM_USE_OPROFILE $USE_OPROFILE
-_ACEOF
-
-
-
-# Check whether --with-intel-jitevents was given.
-if test "${with_intel_jitevents+set}" = set; then
- withval=$with_intel_jitevents;
- case "$withval" in
- yes) USE_INTEL_JITEVENTS=1
-;;
- no) USE_INTEL_JITEVENTS=0
-;;
- *) { { echo "$as_me:$LINENO: error: Invalid setting for --with-intel-jitevents. Use \"yes\" or \"no\"" >&5
-echo "$as_me: error: Invalid setting for --with-intel-jitevents. Use \"yes\" or \"no\"" >&2;}
- { (exit 1); exit 1; }; };;
- esac
-
- case $llvm_cv_os_type in
- Linux|Win32|Cygwin|MingW) ;;
- *) { { echo "$as_me:$LINENO: error: Intel JIT API support is available on Linux and Windows only." >&5
-echo "$as_me: error: Intel JIT API support is available on Linux and Windows only." >&2;}
- { (exit 1); exit 1; }; };;
- esac
-
- case "$llvm_cv_target_arch" in
- x86|x86_64) ;;
- *) { { echo "$as_me:$LINENO: error: Target architecture $llvm_cv_target_arch does not support Intel JIT Events API." >&5
-echo "$as_me: error: Target architecture $llvm_cv_target_arch does not support Intel JIT Events API." >&2;}
- { (exit 1); exit 1; }; };;
- esac
-
-else
-
- USE_INTEL_JITEVENTS=0
-
-
-fi
-
-
-cat >>confdefs.h <<_ACEOF
-#define LLVM_USE_INTEL_JITEVENTS $USE_INTEL_JITEVENTS
-_ACEOF
-
-
-for ac_prog in xml2-config
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_XML2CONFIG+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$XML2CONFIG"; then
- ac_cv_prog_XML2CONFIG="$XML2CONFIG" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_XML2CONFIG="$ac_prog"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-XML2CONFIG=$ac_cv_prog_XML2CONFIG
-if test -n "$XML2CONFIG"; then
- { echo "$as_me:$LINENO: result: $XML2CONFIG" >&5
-echo "${ECHO_T}$XML2CONFIG" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
- test -n "$XML2CONFIG" && break
-done
-
-
-{ echo "$as_me:$LINENO: checking for libxml2 includes" >&5
-echo $ECHO_N "checking for libxml2 includes... $ECHO_C" >&6; }
-if test "x$XML2CONFIG" = "x"; then
- { echo "$as_me:$LINENO: result: xml2-config not found" >&5
-echo "${ECHO_T}xml2-config not found" >&6; }
-else
- LIBXML2_INC=`$XML2CONFIG --cflags`
- { echo "$as_me:$LINENO: result: $LIBXML2_INC" >&5
-echo "${ECHO_T}$LIBXML2_INC" >&6; }
- { echo "$as_me:$LINENO: checking for xmlReadFile in -lxml2" >&5
-echo $ECHO_N "checking for xmlReadFile in -lxml2... $ECHO_C" >&6; }
-if test "${ac_cv_lib_xml2_xmlReadFile+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-lxml2 $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char xmlReadFile ();
-int
-main ()
-{
-return xmlReadFile ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_lib_xml2_xmlReadFile=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_lib_xml2_xmlReadFile=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_lib_xml2_xmlReadFile" >&5
-echo "${ECHO_T}$ac_cv_lib_xml2_xmlReadFile" >&6; }
-if test $ac_cv_lib_xml2_xmlReadFile = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define CLANG_HAVE_LIBXML 1
-_ACEOF
-
- LIBXML2_LIBS="-lxml2"
-fi
-
-fi
-
-
-
-
-
-
-
-
-
-ac_header_dirent=no
-for ac_hdr in dirent.h sys/ndir.h sys/dir.h ndir.h; do
- as_ac_Header=`echo "ac_cv_header_dirent_$ac_hdr" | $as_tr_sh`
-{ echo "$as_me:$LINENO: checking for $ac_hdr that defines DIR" >&5
-echo $ECHO_N "checking for $ac_hdr that defines DIR... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <sys/types.h>
-#include <$ac_hdr>
-
-int
-main ()
-{
-if ((DIR *) 0)
-return 0;
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- eval "$as_ac_Header=yes"
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- eval "$as_ac_Header=no"
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
- cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_hdr" | $as_tr_cpp` 1
-_ACEOF
-
-ac_header_dirent=$ac_hdr; break
-fi
-
-done
-# Two versions of opendir et al. are in -ldir and -lx on SCO Xenix.
-if test $ac_header_dirent = dirent.h; then
- { echo "$as_me:$LINENO: checking for library containing opendir" >&5
-echo $ECHO_N "checking for library containing opendir... $ECHO_C" >&6; }
-if test "${ac_cv_search_opendir+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_func_search_save_LIBS=$LIBS
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char opendir ();
-int
-main ()
-{
-return opendir ();
- ;
- return 0;
-}
-_ACEOF
-for ac_lib in '' dir; do
- if test -z "$ac_lib"; then
- ac_res="none required"
- else
- ac_res=-l$ac_lib
- LIBS="-l$ac_lib $ac_func_search_save_LIBS"
- fi
- rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_search_opendir=$ac_res
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext
- if test "${ac_cv_search_opendir+set}" = set; then
- break
-fi
-done
-if test "${ac_cv_search_opendir+set}" = set; then
- :
-else
- ac_cv_search_opendir=no
-fi
-rm conftest.$ac_ext
-LIBS=$ac_func_search_save_LIBS
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_search_opendir" >&5
-echo "${ECHO_T}$ac_cv_search_opendir" >&6; }
-ac_res=$ac_cv_search_opendir
-if test "$ac_res" != no; then
- test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
-
-fi
-
-else
- { echo "$as_me:$LINENO: checking for library containing opendir" >&5
-echo $ECHO_N "checking for library containing opendir... $ECHO_C" >&6; }
-if test "${ac_cv_search_opendir+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_func_search_save_LIBS=$LIBS
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char opendir ();
-int
-main ()
-{
-return opendir ();
- ;
- return 0;
-}
-_ACEOF
-for ac_lib in '' x; do
- if test -z "$ac_lib"; then
- ac_res="none required"
- else
- ac_res=-l$ac_lib
- LIBS="-l$ac_lib $ac_func_search_save_LIBS"
- fi
- rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_search_opendir=$ac_res
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext
- if test "${ac_cv_search_opendir+set}" = set; then
- break
-fi
-done
-if test "${ac_cv_search_opendir+set}" = set; then
- :
-else
- ac_cv_search_opendir=no
-fi
-rm conftest.$ac_ext
-LIBS=$ac_func_search_save_LIBS
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_search_opendir" >&5
-echo "${ECHO_T}$ac_cv_search_opendir" >&6; }
-ac_res=$ac_cv_search_opendir
-if test "$ac_res" != no; then
- test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
-
-fi
-
-fi
-
-{ echo "$as_me:$LINENO: checking for MAP_ANONYMOUS vs. MAP_ANON" >&5
-echo $ECHO_N "checking for MAP_ANONYMOUS vs. MAP_ANON... $ECHO_C" >&6; }
-if test "${ac_cv_header_mmap_anon+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <sys/mman.h>
-#include <unistd.h>
-#include <fcntl.h>
-int
-main ()
-{
-mmap (0, 1, PROT_READ, MAP_ANONYMOUS, -1, 0); return (0);
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_header_mmap_anon=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_header_mmap_anon=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_header_mmap_anon" >&5
-echo "${ECHO_T}$ac_cv_header_mmap_anon" >&6; }
-if test "$ac_cv_header_mmap_anon" = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_MMAP_ANONYMOUS 1
-_ACEOF
-
-fi
-
-{ echo "$as_me:$LINENO: checking whether stat file-mode macros are broken" >&5
-echo $ECHO_N "checking whether stat file-mode macros are broken... $ECHO_C" >&6; }
-if test "${ac_cv_header_stat_broken+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <sys/types.h>
-#include <sys/stat.h>
-
-#if defined S_ISBLK && defined S_IFDIR
-# if S_ISBLK (S_IFDIR)
-You lose.
-# endif
-#endif
-
-#if defined S_ISBLK && defined S_IFCHR
-# if S_ISBLK (S_IFCHR)
-You lose.
-# endif
-#endif
-
-#if defined S_ISLNK && defined S_IFREG
-# if S_ISLNK (S_IFREG)
-You lose.
-# endif
-#endif
-
-#if defined S_ISSOCK && defined S_IFREG
-# if S_ISSOCK (S_IFREG)
-You lose.
-# endif
-#endif
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- $EGREP "You lose" >/dev/null 2>&1; then
- ac_cv_header_stat_broken=yes
-else
- ac_cv_header_stat_broken=no
-fi
-rm -f conftest*
-
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_header_stat_broken" >&5
-echo "${ECHO_T}$ac_cv_header_stat_broken" >&6; }
-if test $ac_cv_header_stat_broken = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define STAT_MACROS_BROKEN 1
-_ACEOF
-
-fi
-
-{ echo "$as_me:$LINENO: checking for sys/wait.h that is POSIX.1 compatible" >&5
-echo $ECHO_N "checking for sys/wait.h that is POSIX.1 compatible... $ECHO_C" >&6; }
-if test "${ac_cv_header_sys_wait_h+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <sys/types.h>
-#include <sys/wait.h>
-#ifndef WEXITSTATUS
-# define WEXITSTATUS(stat_val) ((unsigned int) (stat_val) >> 8)
-#endif
-#ifndef WIFEXITED
-# define WIFEXITED(stat_val) (((stat_val) & 255) == 0)
-#endif
-
-int
-main ()
-{
- int s;
- wait (&s);
- s = WIFEXITED (s) ? WEXITSTATUS (s) : 1;
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_header_sys_wait_h=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_header_sys_wait_h=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_header_sys_wait_h" >&5
-echo "${ECHO_T}$ac_cv_header_sys_wait_h" >&6; }
-if test $ac_cv_header_sys_wait_h = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_SYS_WAIT_H 1
-_ACEOF
-
-fi
-
-{ echo "$as_me:$LINENO: checking whether time.h and sys/time.h may both be included" >&5
-echo $ECHO_N "checking whether time.h and sys/time.h may both be included... $ECHO_C" >&6; }
-if test "${ac_cv_header_time+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <sys/types.h>
-#include <sys/time.h>
-#include <time.h>
-
-int
-main ()
-{
-if ((struct tm *) 0)
-return 0;
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_header_time=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_header_time=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_header_time" >&5
-echo "${ECHO_T}$ac_cv_header_time" >&6; }
-if test $ac_cv_header_time = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define TIME_WITH_SYS_TIME 1
-_ACEOF
-
-fi
-
-
-ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
-ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-{ echo "$as_me:$LINENO: checking how to run the C++ preprocessor" >&5
-echo $ECHO_N "checking how to run the C++ preprocessor... $ECHO_C" >&6; }
-if test -z "$CXXCPP"; then
- if test "${ac_cv_prog_CXXCPP+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- # Double quotes because CXXCPP needs to be expanded
- for CXXCPP in "$CXX -E" "/lib/cpp"
- do
- ac_preproc_ok=false
-for ac_cxx_preproc_warn_flag in '' yes
-do
- # Use a header file that comes with gcc, so configuring glibc
- # with a fresh cross-compiler works.
- # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- # <limits.h> exists even on freestanding compilers.
- # On the NeXT, cc -E runs the code through the compiler's parser,
- # not just through cpp. "Syntax error" is here to catch this case.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
- Syntax error
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_cxx_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
- :
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- # Broken: fails on valid input.
-continue
-fi
-
-rm -f conftest.err conftest.$ac_ext
-
- # OK, works on sane cases. Now check whether nonexistent headers
- # can be detected and how.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <ac_nonexistent.h>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_cxx_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
- # Broken: success on invalid input.
-continue
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- # Passes both tests.
-ac_preproc_ok=:
-break
-fi
-
-rm -f conftest.err conftest.$ac_ext
-
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then
- break
-fi
-
- done
- ac_cv_prog_CXXCPP=$CXXCPP
-
-fi
- CXXCPP=$ac_cv_prog_CXXCPP
-else
- ac_cv_prog_CXXCPP=$CXXCPP
-fi
-{ echo "$as_me:$LINENO: result: $CXXCPP" >&5
-echo "${ECHO_T}$CXXCPP" >&6; }
-ac_preproc_ok=false
-for ac_cxx_preproc_warn_flag in '' yes
-do
- # Use a header file that comes with gcc, so configuring glibc
- # with a fresh cross-compiler works.
- # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- # <limits.h> exists even on freestanding compilers.
- # On the NeXT, cc -E runs the code through the compiler's parser,
- # not just through cpp. "Syntax error" is here to catch this case.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
- Syntax error
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_cxx_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
- :
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- # Broken: fails on valid input.
-continue
-fi
-
-rm -f conftest.err conftest.$ac_ext
-
- # OK, works on sane cases. Now check whether nonexistent headers
- # can be detected and how.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <ac_nonexistent.h>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_cxx_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
- # Broken: success on invalid input.
-continue
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- # Passes both tests.
-ac_preproc_ok=:
-break
-fi
-
-rm -f conftest.err conftest.$ac_ext
-
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then
- :
-else
- { { echo "$as_me:$LINENO: error: C++ preprocessor \"$CXXCPP\" fails sanity check
-See \`config.log' for more details." >&5
-echo "$as_me: error: C++ preprocessor \"$CXXCPP\" fails sanity check
-See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
-
-
-for ac_header in cxxabi.h
-do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- { echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-else
- # Is the header compilable?
-{ echo "$as_me:$LINENO: checking $ac_header usability" >&5
-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_header_compiler=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_header_compiler=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-echo "${ECHO_T}$ac_header_compiler" >&6; }
-
-# Is the header present?
-{ echo "$as_me:$LINENO: checking $ac_header presence" >&5
-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <$ac_header>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_cxx_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
- ac_header_preproc=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_header_preproc=no
-fi
-
-rm -f conftest.err conftest.$ac_ext
-{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-echo "${ECHO_T}$ac_header_preproc" >&6; }
-
-# So? What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_cxx_preproc_warn_flag in
- yes:no: )
- { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
- ac_header_preproc=yes
- ;;
- no:yes:* )
- { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
-echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
-echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
- ( cat <<\_ASBOX
-## ------------------------------------ ##
-## Report this to http://llvm.org/bugs/ ##
-## ------------------------------------ ##
-_ASBOX
- ) | sed "s/^/$as_me: WARNING: /" >&2
- ;;
-esac
-{ echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- eval "$as_ac_Header=\$ac_header_preproc"
-fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-
-fi
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
- cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-
-done
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-
-
-
-
-
-for ac_header in dlfcn.h execinfo.h fcntl.h inttypes.h limits.h link.h
-do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- { echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-else
- # Is the header compilable?
-{ echo "$as_me:$LINENO: checking $ac_header usability" >&5
-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_header_compiler=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_header_compiler=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-echo "${ECHO_T}$ac_header_compiler" >&6; }
-
-# Is the header present?
-{ echo "$as_me:$LINENO: checking $ac_header presence" >&5
-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <$ac_header>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
- ac_header_preproc=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_header_preproc=no
-fi
-
-rm -f conftest.err conftest.$ac_ext
-{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-echo "${ECHO_T}$ac_header_preproc" >&6; }
-
-# So? What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
- yes:no: )
- { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
- ac_header_preproc=yes
- ;;
- no:yes:* )
- { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
-echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
-echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
- ( cat <<\_ASBOX
-## ------------------------------------ ##
-## Report this to http://llvm.org/bugs/ ##
-## ------------------------------------ ##
-_ASBOX
- ) | sed "s/^/$as_me: WARNING: /" >&2
- ;;
-esac
-{ echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- eval "$as_ac_Header=\$ac_header_preproc"
-fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-
-fi
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
- cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-
-done
-
-
-
-
-
-
-
-for ac_header in malloc.h setjmp.h signal.h stdint.h termios.h unistd.h
-do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- { echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-else
- # Is the header compilable?
-{ echo "$as_me:$LINENO: checking $ac_header usability" >&5
-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_header_compiler=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_header_compiler=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-echo "${ECHO_T}$ac_header_compiler" >&6; }
-
-# Is the header present?
-{ echo "$as_me:$LINENO: checking $ac_header presence" >&5
-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <$ac_header>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
- ac_header_preproc=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_header_preproc=no
-fi
-
-rm -f conftest.err conftest.$ac_ext
-{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-echo "${ECHO_T}$ac_header_preproc" >&6; }
-
-# So? What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
- yes:no: )
- { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
- ac_header_preproc=yes
- ;;
- no:yes:* )
- { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
-echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
-echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
- ( cat <<\_ASBOX
-## ------------------------------------ ##
-## Report this to http://llvm.org/bugs/ ##
-## ------------------------------------ ##
-_ASBOX
- ) | sed "s/^/$as_me: WARNING: /" >&2
- ;;
-esac
-{ echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- eval "$as_ac_Header=\$ac_header_preproc"
-fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-
-fi
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
- cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-
-done
-
-
-
-for ac_header in utime.h windows.h
-do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- { echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-else
- # Is the header compilable?
-{ echo "$as_me:$LINENO: checking $ac_header usability" >&5
-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_header_compiler=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_header_compiler=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-echo "${ECHO_T}$ac_header_compiler" >&6; }
-
-# Is the header present?
-{ echo "$as_me:$LINENO: checking $ac_header presence" >&5
-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <$ac_header>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
- ac_header_preproc=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_header_preproc=no
-fi
-
-rm -f conftest.err conftest.$ac_ext
-{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-echo "${ECHO_T}$ac_header_preproc" >&6; }
-
-# So? What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
- yes:no: )
- { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
- ac_header_preproc=yes
- ;;
- no:yes:* )
- { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
-echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
-echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
- ( cat <<\_ASBOX
-## ------------------------------------ ##
-## Report this to http://llvm.org/bugs/ ##
-## ------------------------------------ ##
-_ASBOX
- ) | sed "s/^/$as_me: WARNING: /" >&2
- ;;
-esac
-{ echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- eval "$as_ac_Header=\$ac_header_preproc"
-fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-
-fi
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
- cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-
-done
-
-
-
-
-
-
-for ac_header in sys/mman.h sys/param.h sys/resource.h sys/time.h sys/uio.h
-do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- { echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-else
- # Is the header compilable?
-{ echo "$as_me:$LINENO: checking $ac_header usability" >&5
-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_header_compiler=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_header_compiler=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-echo "${ECHO_T}$ac_header_compiler" >&6; }
-
-# Is the header present?
-{ echo "$as_me:$LINENO: checking $ac_header presence" >&5
-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <$ac_header>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
- ac_header_preproc=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_header_preproc=no
-fi
-
-rm -f conftest.err conftest.$ac_ext
-{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-echo "${ECHO_T}$ac_header_preproc" >&6; }
-
-# So? What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
- yes:no: )
- { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
- ac_header_preproc=yes
- ;;
- no:yes:* )
- { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
-echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
-echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
- ( cat <<\_ASBOX
-## ------------------------------------ ##
-## Report this to http://llvm.org/bugs/ ##
-## ------------------------------------ ##
-_ASBOX
- ) | sed "s/^/$as_me: WARNING: /" >&2
- ;;
-esac
-{ echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- eval "$as_ac_Header=\$ac_header_preproc"
-fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-
-fi
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
- cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-
-done
-
-
-
-
-
-for ac_header in sys/types.h sys/ioctl.h malloc/malloc.h mach/mach.h
-do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- { echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-else
- # Is the header compilable?
-{ echo "$as_me:$LINENO: checking $ac_header usability" >&5
-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_header_compiler=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_header_compiler=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-echo "${ECHO_T}$ac_header_compiler" >&6; }
-
-# Is the header present?
-{ echo "$as_me:$LINENO: checking $ac_header presence" >&5
-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <$ac_header>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
- ac_header_preproc=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_header_preproc=no
-fi
-
-rm -f conftest.err conftest.$ac_ext
-{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-echo "${ECHO_T}$ac_header_preproc" >&6; }
-
-# So? What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
- yes:no: )
- { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
- ac_header_preproc=yes
- ;;
- no:yes:* )
- { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
-echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
-echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
- ( cat <<\_ASBOX
-## ------------------------------------ ##
-## Report this to http://llvm.org/bugs/ ##
-## ------------------------------------ ##
-_ASBOX
- ) | sed "s/^/$as_me: WARNING: /" >&2
- ;;
-esac
-{ echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- eval "$as_ac_Header=\$ac_header_preproc"
-fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-
-fi
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
- cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-
-done
-
-
-for ac_header in valgrind/valgrind.h
-do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- { echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-else
- # Is the header compilable?
-{ echo "$as_me:$LINENO: checking $ac_header usability" >&5
-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_header_compiler=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_header_compiler=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-echo "${ECHO_T}$ac_header_compiler" >&6; }
-
-# Is the header present?
-{ echo "$as_me:$LINENO: checking $ac_header presence" >&5
-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <$ac_header>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
- ac_header_preproc=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_header_preproc=no
-fi
-
-rm -f conftest.err conftest.$ac_ext
-{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-echo "${ECHO_T}$ac_header_preproc" >&6; }
-
-# So? What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
- yes:no: )
- { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
- ac_header_preproc=yes
- ;;
- no:yes:* )
- { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
-echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
-echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
- ( cat <<\_ASBOX
-## ------------------------------------ ##
-## Report this to http://llvm.org/bugs/ ##
-## ------------------------------------ ##
-_ASBOX
- ) | sed "s/^/$as_me: WARNING: /" >&2
- ;;
-esac
-{ echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- eval "$as_ac_Header=\$ac_header_preproc"
-fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-
-fi
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
- cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-
-done
-
-
-for ac_header in fenv.h
-do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- { echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-else
- # Is the header compilable?
-{ echo "$as_me:$LINENO: checking $ac_header usability" >&5
-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_header_compiler=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_header_compiler=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-echo "${ECHO_T}$ac_header_compiler" >&6; }
-
-# Is the header present?
-{ echo "$as_me:$LINENO: checking $ac_header presence" >&5
-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <$ac_header>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
- ac_header_preproc=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_header_preproc=no
-fi
-
-rm -f conftest.err conftest.$ac_ext
-{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-echo "${ECHO_T}$ac_header_preproc" >&6; }
-
-# So? What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
- yes:no: )
- { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
- ac_header_preproc=yes
- ;;
- no:yes:* )
- { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
-echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
-echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
- ( cat <<\_ASBOX
-## ------------------------------------ ##
-## Report this to http://llvm.org/bugs/ ##
-## ------------------------------------ ##
-_ASBOX
- ) | sed "s/^/$as_me: WARNING: /" >&2
- ;;
-esac
-{ echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- eval "$as_ac_Header=\$ac_header_preproc"
-fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-
-fi
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
- cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-
-done
-
-{ echo "$as_me:$LINENO: checking whether FE_ALL_EXCEPT is declared" >&5
-echo $ECHO_N "checking whether FE_ALL_EXCEPT is declared... $ECHO_C" >&6; }
-if test "${ac_cv_have_decl_FE_ALL_EXCEPT+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <fenv.h>
-
-int
-main ()
-{
-#ifndef FE_ALL_EXCEPT
- char *p = (char *) FE_ALL_EXCEPT;
- return !p;
-#endif
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_have_decl_FE_ALL_EXCEPT=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_have_decl_FE_ALL_EXCEPT=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_have_decl_FE_ALL_EXCEPT" >&5
-echo "${ECHO_T}$ac_cv_have_decl_FE_ALL_EXCEPT" >&6; }
-if test $ac_cv_have_decl_FE_ALL_EXCEPT = yes; then
-
-cat >>confdefs.h <<_ACEOF
-#define HAVE_DECL_FE_ALL_EXCEPT 1
-_ACEOF
-
-
-else
- cat >>confdefs.h <<_ACEOF
-#define HAVE_DECL_FE_ALL_EXCEPT 0
-_ACEOF
-
-
-fi
-{ echo "$as_me:$LINENO: checking whether FE_INEXACT is declared" >&5
-echo $ECHO_N "checking whether FE_INEXACT is declared... $ECHO_C" >&6; }
-if test "${ac_cv_have_decl_FE_INEXACT+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <fenv.h>
-
-int
-main ()
-{
-#ifndef FE_INEXACT
- char *p = (char *) FE_INEXACT;
- return !p;
-#endif
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_have_decl_FE_INEXACT=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_have_decl_FE_INEXACT=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_have_decl_FE_INEXACT" >&5
-echo "${ECHO_T}$ac_cv_have_decl_FE_INEXACT" >&6; }
-if test $ac_cv_have_decl_FE_INEXACT = yes; then
-
-cat >>confdefs.h <<_ACEOF
-#define HAVE_DECL_FE_INEXACT 1
-_ACEOF
-
-
-else
- cat >>confdefs.h <<_ACEOF
-#define HAVE_DECL_FE_INEXACT 0
-_ACEOF
-
-
-fi
-
-
-if test "$LLVM_ENABLE_THREADS" -eq 1 && test "$ENABLE_PTHREADS" -eq 1 ; then
-
-for ac_header in pthread.h
-do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- { echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-else
- # Is the header compilable?
-{ echo "$as_me:$LINENO: checking $ac_header usability" >&5
-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_header_compiler=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_header_compiler=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-echo "${ECHO_T}$ac_header_compiler" >&6; }
-
-# Is the header present?
-{ echo "$as_me:$LINENO: checking $ac_header presence" >&5
-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <$ac_header>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
- ac_header_preproc=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_header_preproc=no
-fi
-
-rm -f conftest.err conftest.$ac_ext
-{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-echo "${ECHO_T}$ac_header_preproc" >&6; }
-
-# So? What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
- yes:no: )
- { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
- ac_header_preproc=yes
- ;;
- no:yes:* )
- { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
-echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
-echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
- ( cat <<\_ASBOX
-## ------------------------------------ ##
-## Report this to http://llvm.org/bugs/ ##
-## ------------------------------------ ##
-_ASBOX
- ) | sed "s/^/$as_me: WARNING: /" >&2
- ;;
-esac
-{ echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- eval "$as_ac_Header=\$ac_header_preproc"
-fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-
-fi
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
- cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
- HAVE_PTHREAD=1
-
-else
- HAVE_PTHREAD=0
-
-fi
-
-done
-
-else
- HAVE_PTHREAD=0
-
-fi
-if test "$LLVM_ENABLE_ZLIB" -eq 1 ; then
-
-for ac_header in zlib.h
-do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- { echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-else
- # Is the header compilable?
-{ echo "$as_me:$LINENO: checking $ac_header usability" >&5
-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_header_compiler=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_header_compiler=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-echo "${ECHO_T}$ac_header_compiler" >&6; }
-
-# Is the header present?
-{ echo "$as_me:$LINENO: checking $ac_header presence" >&5
-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <$ac_header>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
- ac_header_preproc=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_header_preproc=no
-fi
-
-rm -f conftest.err conftest.$ac_ext
-{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-echo "${ECHO_T}$ac_header_preproc" >&6; }
-
-# So? What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
- yes:no: )
- { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
- ac_header_preproc=yes
- ;;
- no:yes:* )
- { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
-echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
-echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
- ( cat <<\_ASBOX
-## ------------------------------------ ##
-## Report this to http://llvm.org/bugs/ ##
-## ------------------------------------ ##
-_ASBOX
- ) | sed "s/^/$as_me: WARNING: /" >&2
- ;;
-esac
-{ echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- eval "$as_ac_Header=\$ac_header_preproc"
-fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-
-fi
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
- cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
- HAVE_LIBZ=1
-
-else
- HAVE_LIBZ=0
-
-fi
-
-done
-
-else
- HAVE_LIBZ=0
-
-fi
-
-if test "$llvm_cv_enable_libffi" = "yes" ; then
-
-
-for ac_header in ffi.h ffi/ffi.h
-do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- { echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-else
- # Is the header compilable?
-{ echo "$as_me:$LINENO: checking $ac_header usability" >&5
-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_header_compiler=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_header_compiler=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-echo "${ECHO_T}$ac_header_compiler" >&6; }
-
-# Is the header present?
-{ echo "$as_me:$LINENO: checking $ac_header presence" >&5
-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <$ac_header>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
- ac_header_preproc=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_header_preproc=no
-fi
-
-rm -f conftest.err conftest.$ac_ext
-{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-echo "${ECHO_T}$ac_header_preproc" >&6; }
-
-# So? What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
- yes:no: )
- { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
- ac_header_preproc=yes
- ;;
- no:yes:* )
- { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
-echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
-echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
- ( cat <<\_ASBOX
-## ------------------------------------ ##
-## Report this to http://llvm.org/bugs/ ##
-## ------------------------------------ ##
-_ASBOX
- ) | sed "s/^/$as_me: WARNING: /" >&2
- ;;
-esac
-{ echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- eval "$as_ac_Header=\$ac_header_preproc"
-fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-
-fi
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
- cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-
-done
-
-fi
-
-
-for ac_header in CrashReporterClient.h
-do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- { echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-else
- # Is the header compilable?
-{ echo "$as_me:$LINENO: checking $ac_header usability" >&5
-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_header_compiler=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_header_compiler=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-echo "${ECHO_T}$ac_header_compiler" >&6; }
-
-# Is the header present?
-{ echo "$as_me:$LINENO: checking $ac_header presence" >&5
-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <$ac_header>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
- ac_header_preproc=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_header_preproc=no
-fi
-
-rm -f conftest.err conftest.$ac_ext
-{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-echo "${ECHO_T}$ac_header_preproc" >&6; }
-
-# So? What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
- yes:no: )
- { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
- ac_header_preproc=yes
- ;;
- no:yes:* )
- { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
-echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
-echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
- ( cat <<\_ASBOX
-## ------------------------------------ ##
-## Report this to http://llvm.org/bugs/ ##
-## ------------------------------------ ##
-_ASBOX
- ) | sed "s/^/$as_me: WARNING: /" >&2
- ;;
-esac
-{ echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- eval "$as_ac_Header=\$ac_header_preproc"
-fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-
-fi
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
- cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-
-done
-
-
-{ echo "$as_me:$LINENO: checking __crashreporter_info__" >&5
-echo $ECHO_N "checking __crashreporter_info__... $ECHO_C" >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-
- /* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
- extern const char *__crashreporter_info__;
- int main() {
- __crashreporter_info__ = "test";
- return 0;
- }
-
-
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
-
- { echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6; }
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_CRASHREPORTER_INFO 1
-_ACEOF
-
-
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_CRASHREPORTER_INFO 0
-_ACEOF
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-
-
-
- { echo "$as_me:$LINENO: checking for HUGE_VAL sanity" >&5
-echo $ECHO_N "checking for HUGE_VAL sanity... $ECHO_C" >&6; }
-if test "${ac_cv_huge_val_sanity+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-
- ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
- ac_save_CXXFLAGS=$CXXFLAGS
- CXXFLAGS="$CXXFLAGS -pedantic"
- if test "$cross_compiling" = yes; then
- ac_cv_huge_val_sanity=yes
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <math.h>
-int
-main ()
-{
-double x = HUGE_VAL; return x != x;
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_huge_val_sanity=yes
-else
- echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
-ac_cv_huge_val_sanity=no
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-
-
- CXXFLAGS=$ac_save_CXXFLAGS
- ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_huge_val_sanity" >&5
-echo "${ECHO_T}$ac_cv_huge_val_sanity" >&6; }
- HUGE_VAL_SANITY=$ac_cv_huge_val_sanity
-
-
-{ echo "$as_me:$LINENO: checking for pid_t" >&5
-echo $ECHO_N "checking for pid_t... $ECHO_C" >&6; }
-if test "${ac_cv_type_pid_t+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-typedef pid_t ac__type_new_;
-int
-main ()
-{
-if ((ac__type_new_ *) 0)
- return 0;
-if (sizeof (ac__type_new_))
- return 0;
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_type_pid_t=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_type_pid_t=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_type_pid_t" >&5
-echo "${ECHO_T}$ac_cv_type_pid_t" >&6; }
-if test $ac_cv_type_pid_t = yes; then
- :
-else
-
-cat >>confdefs.h <<_ACEOF
-#define pid_t int
-_ACEOF
-
-fi
-
-{ echo "$as_me:$LINENO: checking for size_t" >&5
-echo $ECHO_N "checking for size_t... $ECHO_C" >&6; }
-if test "${ac_cv_type_size_t+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-typedef size_t ac__type_new_;
-int
-main ()
-{
-if ((ac__type_new_ *) 0)
- return 0;
-if (sizeof (ac__type_new_))
- return 0;
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_type_size_t=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_type_size_t=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_type_size_t" >&5
-echo "${ECHO_T}$ac_cv_type_size_t" >&6; }
-if test $ac_cv_type_size_t = yes; then
- :
-else
-
-cat >>confdefs.h <<_ACEOF
-#define size_t unsigned int
-_ACEOF
-
-fi
-
-
-cat >>confdefs.h <<_ACEOF
-#define RETSIGTYPE void
-_ACEOF
-
-{ echo "$as_me:$LINENO: checking whether struct tm is in sys/time.h or time.h" >&5
-echo $ECHO_N "checking whether struct tm is in sys/time.h or time.h... $ECHO_C" >&6; }
-if test "${ac_cv_struct_tm+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <sys/types.h>
-#include <time.h>
-
-int
-main ()
-{
-struct tm *tp; tp->tm_sec;
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_struct_tm=time.h
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_struct_tm=sys/time.h
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_struct_tm" >&5
-echo "${ECHO_T}$ac_cv_struct_tm" >&6; }
-if test $ac_cv_struct_tm = sys/time.h; then
-
-cat >>confdefs.h <<\_ACEOF
-#define TM_IN_SYS_TIME 1
-_ACEOF
-
-fi
-
-{ echo "$as_me:$LINENO: checking for int64_t" >&5
-echo $ECHO_N "checking for int64_t... $ECHO_C" >&6; }
-if test "${ac_cv_type_int64_t+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-typedef int64_t ac__type_new_;
-int
-main ()
-{
-if ((ac__type_new_ *) 0)
- return 0;
-if (sizeof (ac__type_new_))
- return 0;
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_type_int64_t=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_type_int64_t=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_type_int64_t" >&5
-echo "${ECHO_T}$ac_cv_type_int64_t" >&6; }
-if test $ac_cv_type_int64_t = yes; then
-
-cat >>confdefs.h <<_ACEOF
-#define HAVE_INT64_T 1
-_ACEOF
-
-
-else
- { { echo "$as_me:$LINENO: error: Type int64_t required but not found" >&5
-echo "$as_me: error: Type int64_t required but not found" >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-{ echo "$as_me:$LINENO: checking for uint64_t" >&5
-echo $ECHO_N "checking for uint64_t... $ECHO_C" >&6; }
-if test "${ac_cv_type_uint64_t+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-typedef uint64_t ac__type_new_;
-int
-main ()
-{
-if ((ac__type_new_ *) 0)
- return 0;
-if (sizeof (ac__type_new_))
- return 0;
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_type_uint64_t=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_type_uint64_t=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_type_uint64_t" >&5
-echo "${ECHO_T}$ac_cv_type_uint64_t" >&6; }
-if test $ac_cv_type_uint64_t = yes; then
-
-cat >>confdefs.h <<_ACEOF
-#define HAVE_UINT64_T 1
-_ACEOF
-
-
-else
- { echo "$as_me:$LINENO: checking for u_int64_t" >&5
-echo $ECHO_N "checking for u_int64_t... $ECHO_C" >&6; }
-if test "${ac_cv_type_u_int64_t+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-typedef u_int64_t ac__type_new_;
-int
-main ()
-{
-if ((ac__type_new_ *) 0)
- return 0;
-if (sizeof (ac__type_new_))
- return 0;
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_type_u_int64_t=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_type_u_int64_t=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_type_u_int64_t" >&5
-echo "${ECHO_T}$ac_cv_type_u_int64_t" >&6; }
-if test $ac_cv_type_u_int64_t = yes; then
-
-cat >>confdefs.h <<_ACEOF
-#define HAVE_U_INT64_T 1
-_ACEOF
-
-
-else
- { { echo "$as_me:$LINENO: error: Type uint64_t or u_int64_t required but not found" >&5
-echo "$as_me: error: Type uint64_t or u_int64_t required but not found" >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-fi
-
-
-
-
-
-
-
-
-
-
-for ac_func in backtrace ceilf floorf roundf rintf nearbyintf getcwd
-do
-as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-{ echo "$as_me:$LINENO: checking for $ac_func" >&5
-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; }
-if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
- For example, HP-UX 11i <limits.h> declares gettimeofday. */
-#define $ac_func innocuous_$ac_func
-
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char $ac_func (); below.
- Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- <limits.h> exists even on freestanding compilers. */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef $ac_func
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char $ac_func ();
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined __stub_$ac_func || defined __stub___$ac_func
-choke me
-#endif
-
-int
-main ()
-{
-return $ac_func ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- eval "$as_ac_var=yes"
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- eval "$as_ac_var=no"
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-fi
-ac_res=`eval echo '${'$as_ac_var'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-if test `eval echo '${'$as_ac_var'}'` = yes; then
- cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-done
-
-
-
-
-
-for ac_func in powf fmodf strtof round
-do
-as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-{ echo "$as_me:$LINENO: checking for $ac_func" >&5
-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; }
-if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
- For example, HP-UX 11i <limits.h> declares gettimeofday. */
-#define $ac_func innocuous_$ac_func
-
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char $ac_func (); below.
- Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- <limits.h> exists even on freestanding compilers. */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef $ac_func
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char $ac_func ();
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined __stub_$ac_func || defined __stub___$ac_func
-choke me
-#endif
-
-int
-main ()
-{
-return $ac_func ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- eval "$as_ac_var=yes"
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- eval "$as_ac_var=no"
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-fi
-ac_res=`eval echo '${'$as_ac_var'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-if test `eval echo '${'$as_ac_var'}'` = yes; then
- cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-done
-
-
-
-
-
-
-for ac_func in log log2 log10 exp exp2
-do
-as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-{ echo "$as_me:$LINENO: checking for $ac_func" >&5
-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; }
-if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
- For example, HP-UX 11i <limits.h> declares gettimeofday. */
-#define $ac_func innocuous_$ac_func
-
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char $ac_func (); below.
- Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- <limits.h> exists even on freestanding compilers. */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef $ac_func
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char $ac_func ();
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined __stub_$ac_func || defined __stub___$ac_func
-choke me
-#endif
-
-int
-main ()
-{
-return $ac_func ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- eval "$as_ac_var=yes"
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- eval "$as_ac_var=no"
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-fi
-ac_res=`eval echo '${'$as_ac_var'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-if test `eval echo '${'$as_ac_var'}'` = yes; then
- cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-done
-
-
-
-
-
-
-for ac_func in getpagesize getrusage getrlimit setrlimit gettimeofday
-do
-as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-{ echo "$as_me:$LINENO: checking for $ac_func" >&5
-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; }
-if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
- For example, HP-UX 11i <limits.h> declares gettimeofday. */
-#define $ac_func innocuous_$ac_func
-
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char $ac_func (); below.
- Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- <limits.h> exists even on freestanding compilers. */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef $ac_func
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char $ac_func ();
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined __stub_$ac_func || defined __stub___$ac_func
-choke me
-#endif
-
-int
-main ()
-{
-return $ac_func ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- eval "$as_ac_var=yes"
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- eval "$as_ac_var=no"
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-fi
-ac_res=`eval echo '${'$as_ac_var'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-if test `eval echo '${'$as_ac_var'}'` = yes; then
- cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-done
-
-
-
-
-for ac_func in isatty mkdtemp mkstemp
-do
-as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-{ echo "$as_me:$LINENO: checking for $ac_func" >&5
-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; }
-if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
- For example, HP-UX 11i <limits.h> declares gettimeofday. */
-#define $ac_func innocuous_$ac_func
-
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char $ac_func (); below.
- Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- <limits.h> exists even on freestanding compilers. */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef $ac_func
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char $ac_func ();
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined __stub_$ac_func || defined __stub___$ac_func
-choke me
-#endif
-
-int
-main ()
-{
-return $ac_func ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- eval "$as_ac_var=yes"
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- eval "$as_ac_var=no"
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-fi
-ac_res=`eval echo '${'$as_ac_var'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-if test `eval echo '${'$as_ac_var'}'` = yes; then
- cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-done
-
-
-
-
-
-
-
-
-for ac_func in mktemp posix_spawn pread realpath sbrk setrlimit strdup
-do
-as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-{ echo "$as_me:$LINENO: checking for $ac_func" >&5
-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; }
-if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
- For example, HP-UX 11i <limits.h> declares gettimeofday. */
-#define $ac_func innocuous_$ac_func
-
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char $ac_func (); below.
- Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- <limits.h> exists even on freestanding compilers. */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef $ac_func
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char $ac_func ();
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined __stub_$ac_func || defined __stub___$ac_func
-choke me
-#endif
-
-int
-main ()
-{
-return $ac_func ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- eval "$as_ac_var=yes"
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- eval "$as_ac_var=no"
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-fi
-ac_res=`eval echo '${'$as_ac_var'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-if test `eval echo '${'$as_ac_var'}'` = yes; then
- cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-done
-
-
-
-
-
-for ac_func in strerror strerror_r setenv arc4random
-do
-as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-{ echo "$as_me:$LINENO: checking for $ac_func" >&5
-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; }
-if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
- For example, HP-UX 11i <limits.h> declares gettimeofday. */
-#define $ac_func innocuous_$ac_func
-
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char $ac_func (); below.
- Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- <limits.h> exists even on freestanding compilers. */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef $ac_func
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char $ac_func ();
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined __stub_$ac_func || defined __stub___$ac_func
-choke me
-#endif
-
-int
-main ()
-{
-return $ac_func ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- eval "$as_ac_var=yes"
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- eval "$as_ac_var=no"
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-fi
-ac_res=`eval echo '${'$as_ac_var'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-if test `eval echo '${'$as_ac_var'}'` = yes; then
- cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-done
-
-
-
-
-
-for ac_func in strtoll strtoq sysconf malloc_zone_statistics
-do
-as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-{ echo "$as_me:$LINENO: checking for $ac_func" >&5
-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; }
-if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
- For example, HP-UX 11i <limits.h> declares gettimeofday. */
-#define $ac_func innocuous_$ac_func
-
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char $ac_func (); below.
- Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- <limits.h> exists even on freestanding compilers. */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef $ac_func
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char $ac_func ();
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined __stub_$ac_func || defined __stub___$ac_func
-choke me
-#endif
-
-int
-main ()
-{
-return $ac_func ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- eval "$as_ac_var=yes"
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- eval "$as_ac_var=no"
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-fi
-ac_res=`eval echo '${'$as_ac_var'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-if test `eval echo '${'$as_ac_var'}'` = yes; then
- cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-done
-
-
-
-
-
-
-for ac_func in setjmp longjmp sigsetjmp siglongjmp writev
-do
-as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-{ echo "$as_me:$LINENO: checking for $ac_func" >&5
-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; }
-if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
- For example, HP-UX 11i <limits.h> declares gettimeofday. */
-#define $ac_func innocuous_$ac_func
-
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char $ac_func (); below.
- Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- <limits.h> exists even on freestanding compilers. */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef $ac_func
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char $ac_func ();
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined __stub_$ac_func || defined __stub___$ac_func
-choke me
-#endif
-
-int
-main ()
-{
-return $ac_func ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- eval "$as_ac_var=yes"
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- eval "$as_ac_var=no"
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-fi
-ac_res=`eval echo '${'$as_ac_var'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-if test `eval echo '${'$as_ac_var'}'` = yes; then
- cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-done
-
-{ echo "$as_me:$LINENO: checking if printf has the %a format character" >&5
-echo $ECHO_N "checking if printf has the %a format character... $ECHO_C" >&6; }
-if test "${llvm_cv_c_printf_a+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
- if test "$cross_compiling" = yes; then
- llvmac_cv_c_printf_a=no
-else
- cat >conftest.$ac_ext <<_ACEOF
-
- /* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-#include <stdio.h>
-#include <stdlib.h>
-
-int
-main ()
-{
-
-volatile double A, B;
-char Buffer[100];
-A = 1;
-A /= 10.0;
-sprintf(Buffer, "%a", A);
-B = atof(Buffer);
-if (A != B)
- return (1);
-if (A != 0x1.999999999999ap-4)
- return (1);
-return (0);
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- llvm_cv_c_printf_a=yes
-else
- echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
-llvmac_cv_c_printf_a=no
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-
-
- ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-fi
-{ echo "$as_me:$LINENO: result: $llvm_cv_c_printf_a" >&5
-echo "${ECHO_T}$llvm_cv_c_printf_a" >&6; }
- if test "$llvm_cv_c_printf_a" = "yes"; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_PRINTF_A 1
-_ACEOF
-
- fi
-
-
-
- { echo "$as_me:$LINENO: checking for srand48/lrand48/drand48 in <stdlib.h>" >&5
-echo $ECHO_N "checking for srand48/lrand48/drand48 in <stdlib.h>... $ECHO_C" >&6; }
-if test "${ac_cv_func_rand48+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-
- ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <stdlib.h>
-int
-main ()
-{
-srand48(0);lrand48();drand48();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_func_rand48=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_func_rand48=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_func_rand48" >&5
-echo "${ECHO_T}$ac_cv_func_rand48" >&6; }
-
-if test "$ac_cv_func_rand48" = "yes" ; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_RAND48 1
-_ACEOF
-
-fi
-
-
-{ echo "$as_me:$LINENO: checking whether strerror_s is declared" >&5
-echo $ECHO_N "checking whether strerror_s is declared... $ECHO_C" >&6; }
-if test "${ac_cv_have_decl_strerror_s+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-int
-main ()
-{
-#ifndef strerror_s
- char *p = (char *) strerror_s;
- return !p;
-#endif
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_have_decl_strerror_s=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_have_decl_strerror_s=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_have_decl_strerror_s" >&5
-echo "${ECHO_T}$ac_cv_have_decl_strerror_s" >&6; }
-if test $ac_cv_have_decl_strerror_s = yes; then
-
-cat >>confdefs.h <<_ACEOF
-#define HAVE_DECL_STRERROR_S 1
-_ACEOF
-
-
-else
- cat >>confdefs.h <<_ACEOF
-#define HAVE_DECL_STRERROR_S 0
-_ACEOF
-
-
-fi
-
-
-
-if test "$llvm_cv_os_type" = "MingW" ; then
- { echo "$as_me:$LINENO: checking for _alloca in -lgcc" >&5
-echo $ECHO_N "checking for _alloca in -lgcc... $ECHO_C" >&6; }
-if test "${ac_cv_lib_gcc__alloca+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-lgcc $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char _alloca ();
-int
-main ()
-{
-return _alloca ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_lib_gcc__alloca=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_lib_gcc__alloca=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_lib_gcc__alloca" >&5
-echo "${ECHO_T}$ac_cv_lib_gcc__alloca" >&6; }
-if test $ac_cv_lib_gcc__alloca = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE__ALLOCA 1
-_ACEOF
-
-fi
-
- { echo "$as_me:$LINENO: checking for __alloca in -lgcc" >&5
-echo $ECHO_N "checking for __alloca in -lgcc... $ECHO_C" >&6; }
-if test "${ac_cv_lib_gcc___alloca+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-lgcc $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char __alloca ();
-int
-main ()
-{
-return __alloca ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_lib_gcc___alloca=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_lib_gcc___alloca=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_lib_gcc___alloca" >&5
-echo "${ECHO_T}$ac_cv_lib_gcc___alloca" >&6; }
-if test $ac_cv_lib_gcc___alloca = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE___ALLOCA 1
-_ACEOF
-
-fi
-
- { echo "$as_me:$LINENO: checking for __chkstk in -lgcc" >&5
-echo $ECHO_N "checking for __chkstk in -lgcc... $ECHO_C" >&6; }
-if test "${ac_cv_lib_gcc___chkstk+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-lgcc $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char __chkstk ();
-int
-main ()
-{
-return __chkstk ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_lib_gcc___chkstk=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_lib_gcc___chkstk=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_lib_gcc___chkstk" >&5
-echo "${ECHO_T}$ac_cv_lib_gcc___chkstk" >&6; }
-if test $ac_cv_lib_gcc___chkstk = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE___CHKSTK 1
-_ACEOF
-
-fi
-
- { echo "$as_me:$LINENO: checking for ___chkstk in -lgcc" >&5
-echo $ECHO_N "checking for ___chkstk in -lgcc... $ECHO_C" >&6; }
-if test "${ac_cv_lib_gcc____chkstk+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-lgcc $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char ___chkstk ();
-int
-main ()
-{
-return ___chkstk ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_lib_gcc____chkstk=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_lib_gcc____chkstk=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_lib_gcc____chkstk" >&5
-echo "${ECHO_T}$ac_cv_lib_gcc____chkstk" >&6; }
-if test $ac_cv_lib_gcc____chkstk = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE____CHKSTK 1
-_ACEOF
-
-fi
-
-
- { echo "$as_me:$LINENO: checking for __ashldi3 in -lgcc" >&5
-echo $ECHO_N "checking for __ashldi3 in -lgcc... $ECHO_C" >&6; }
-if test "${ac_cv_lib_gcc___ashldi3+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-lgcc $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char __ashldi3 ();
-int
-main ()
-{
-return __ashldi3 ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_lib_gcc___ashldi3=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_lib_gcc___ashldi3=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_lib_gcc___ashldi3" >&5
-echo "${ECHO_T}$ac_cv_lib_gcc___ashldi3" >&6; }
-if test $ac_cv_lib_gcc___ashldi3 = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE___ASHLDI3 1
-_ACEOF
-
-fi
-
- { echo "$as_me:$LINENO: checking for __ashrdi3 in -lgcc" >&5
-echo $ECHO_N "checking for __ashrdi3 in -lgcc... $ECHO_C" >&6; }
-if test "${ac_cv_lib_gcc___ashrdi3+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-lgcc $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char __ashrdi3 ();
-int
-main ()
-{
-return __ashrdi3 ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_lib_gcc___ashrdi3=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_lib_gcc___ashrdi3=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_lib_gcc___ashrdi3" >&5
-echo "${ECHO_T}$ac_cv_lib_gcc___ashrdi3" >&6; }
-if test $ac_cv_lib_gcc___ashrdi3 = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE___ASHRDI3 1
-_ACEOF
-
-fi
-
- { echo "$as_me:$LINENO: checking for __divdi3 in -lgcc" >&5
-echo $ECHO_N "checking for __divdi3 in -lgcc... $ECHO_C" >&6; }
-if test "${ac_cv_lib_gcc___divdi3+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-lgcc $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char __divdi3 ();
-int
-main ()
-{
-return __divdi3 ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_lib_gcc___divdi3=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_lib_gcc___divdi3=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_lib_gcc___divdi3" >&5
-echo "${ECHO_T}$ac_cv_lib_gcc___divdi3" >&6; }
-if test $ac_cv_lib_gcc___divdi3 = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE___DIVDI3 1
-_ACEOF
-
-fi
-
- { echo "$as_me:$LINENO: checking for __fixdfdi in -lgcc" >&5
-echo $ECHO_N "checking for __fixdfdi in -lgcc... $ECHO_C" >&6; }
-if test "${ac_cv_lib_gcc___fixdfdi+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-lgcc $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char __fixdfdi ();
-int
-main ()
-{
-return __fixdfdi ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_lib_gcc___fixdfdi=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_lib_gcc___fixdfdi=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_lib_gcc___fixdfdi" >&5
-echo "${ECHO_T}$ac_cv_lib_gcc___fixdfdi" >&6; }
-if test $ac_cv_lib_gcc___fixdfdi = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE___FIXDFDI 1
-_ACEOF
-
-fi
-
- { echo "$as_me:$LINENO: checking for __fixsfdi in -lgcc" >&5
-echo $ECHO_N "checking for __fixsfdi in -lgcc... $ECHO_C" >&6; }
-if test "${ac_cv_lib_gcc___fixsfdi+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-lgcc $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char __fixsfdi ();
-int
-main ()
-{
-return __fixsfdi ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_lib_gcc___fixsfdi=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_lib_gcc___fixsfdi=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_lib_gcc___fixsfdi" >&5
-echo "${ECHO_T}$ac_cv_lib_gcc___fixsfdi" >&6; }
-if test $ac_cv_lib_gcc___fixsfdi = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE___FIXSFDI 1
-_ACEOF
-
-fi
-
- { echo "$as_me:$LINENO: checking for __floatdidf in -lgcc" >&5
-echo $ECHO_N "checking for __floatdidf in -lgcc... $ECHO_C" >&6; }
-if test "${ac_cv_lib_gcc___floatdidf+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-lgcc $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char __floatdidf ();
-int
-main ()
-{
-return __floatdidf ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_lib_gcc___floatdidf=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_lib_gcc___floatdidf=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_lib_gcc___floatdidf" >&5
-echo "${ECHO_T}$ac_cv_lib_gcc___floatdidf" >&6; }
-if test $ac_cv_lib_gcc___floatdidf = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE___FLOATDIDF 1
-_ACEOF
-
-fi
-
- { echo "$as_me:$LINENO: checking for __lshrdi3 in -lgcc" >&5
-echo $ECHO_N "checking for __lshrdi3 in -lgcc... $ECHO_C" >&6; }
-if test "${ac_cv_lib_gcc___lshrdi3+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-lgcc $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char __lshrdi3 ();
-int
-main ()
-{
-return __lshrdi3 ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_lib_gcc___lshrdi3=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_lib_gcc___lshrdi3=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_lib_gcc___lshrdi3" >&5
-echo "${ECHO_T}$ac_cv_lib_gcc___lshrdi3" >&6; }
-if test $ac_cv_lib_gcc___lshrdi3 = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE___LSHRDI3 1
-_ACEOF
-
-fi
-
- { echo "$as_me:$LINENO: checking for __moddi3 in -lgcc" >&5
-echo $ECHO_N "checking for __moddi3 in -lgcc... $ECHO_C" >&6; }
-if test "${ac_cv_lib_gcc___moddi3+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-lgcc $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char __moddi3 ();
-int
-main ()
-{
-return __moddi3 ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_lib_gcc___moddi3=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_lib_gcc___moddi3=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_lib_gcc___moddi3" >&5
-echo "${ECHO_T}$ac_cv_lib_gcc___moddi3" >&6; }
-if test $ac_cv_lib_gcc___moddi3 = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE___MODDI3 1
-_ACEOF
-
-fi
-
- { echo "$as_me:$LINENO: checking for __udivdi3 in -lgcc" >&5
-echo $ECHO_N "checking for __udivdi3 in -lgcc... $ECHO_C" >&6; }
-if test "${ac_cv_lib_gcc___udivdi3+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-lgcc $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char __udivdi3 ();
-int
-main ()
-{
-return __udivdi3 ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_lib_gcc___udivdi3=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_lib_gcc___udivdi3=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_lib_gcc___udivdi3" >&5
-echo "${ECHO_T}$ac_cv_lib_gcc___udivdi3" >&6; }
-if test $ac_cv_lib_gcc___udivdi3 = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE___UDIVDI3 1
-_ACEOF
-
-fi
-
- { echo "$as_me:$LINENO: checking for __umoddi3 in -lgcc" >&5
-echo $ECHO_N "checking for __umoddi3 in -lgcc... $ECHO_C" >&6; }
-if test "${ac_cv_lib_gcc___umoddi3+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-lgcc $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char __umoddi3 ();
-int
-main ()
-{
-return __umoddi3 ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_lib_gcc___umoddi3=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_lib_gcc___umoddi3=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_lib_gcc___umoddi3" >&5
-echo "${ECHO_T}$ac_cv_lib_gcc___umoddi3" >&6; }
-if test $ac_cv_lib_gcc___umoddi3 = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE___UMODDI3 1
-_ACEOF
-
-fi
-
-
- { echo "$as_me:$LINENO: checking for __main in -lgcc" >&5
-echo $ECHO_N "checking for __main in -lgcc... $ECHO_C" >&6; }
-if test "${ac_cv_lib_gcc___main+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-lgcc $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char __main ();
-int
-main ()
-{
-return __main ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_lib_gcc___main=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_lib_gcc___main=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_lib_gcc___main" >&5
-echo "${ECHO_T}$ac_cv_lib_gcc___main" >&6; }
-if test $ac_cv_lib_gcc___main = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE___MAIN 1
-_ACEOF
-
-fi
-
- { echo "$as_me:$LINENO: checking for __cmpdi2 in -lgcc" >&5
-echo $ECHO_N "checking for __cmpdi2 in -lgcc... $ECHO_C" >&6; }
-if test "${ac_cv_lib_gcc___cmpdi2+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-lgcc $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char __cmpdi2 ();
-int
-main ()
-{
-return __cmpdi2 ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_lib_gcc___cmpdi2=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_lib_gcc___cmpdi2=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_lib_gcc___cmpdi2" >&5
-echo "${ECHO_T}$ac_cv_lib_gcc___cmpdi2" >&6; }
-if test $ac_cv_lib_gcc___cmpdi2 = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE___CMPDI2 1
-_ACEOF
-
-fi
-
-fi
-
-if test "$llvm_cv_os_type" = "MingW" ; then
- { echo "$as_me:$LINENO: checking whether EnumerateLoadedModules() accepts new decl" >&5
-echo $ECHO_N "checking whether EnumerateLoadedModules() accepts new decl... $ECHO_C" >&6; }
- cat >conftest.$ac_ext <<_ACEOF
-
- /* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
- #include <windows.h>
- #include <imagehlp.h>
- extern void foo(PENUMLOADED_MODULES_CALLBACK);
- extern void foo(BOOL(CALLBACK*)(PCSTR,ULONG_PTR,ULONG,PVOID));
-
-
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
-
- { echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6; }
- llvm_cv_win32_elmcb_pcstr="PCSTR"
-
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
- llvm_cv_win32_elmcb_pcstr="PSTR"
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-
-cat >>confdefs.h <<_ACEOF
-#define WIN32_ELMCB_PCSTR $llvm_cv_win32_elmcb_pcstr
-_ACEOF
-
-fi
-
-
-
- { echo "$as_me:$LINENO: checking for isnan in <math.h>" >&5
-echo $ECHO_N "checking for isnan in <math.h>... $ECHO_C" >&6; }
-if test "${ac_cv_func_isnan_in_math_h+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-
- ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <math.h>
-int
-main ()
-{
-float f; isnan(f);
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_func_isnan_in_math_h=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_func_isnan_in_math_h=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_func_isnan_in_math_h" >&5
-echo "${ECHO_T}$ac_cv_func_isnan_in_math_h" >&6; }
-
-
-if test "$ac_cv_func_isnan_in_math_h" = "yes" ; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_ISNAN_IN_MATH_H 1
-_ACEOF
-
-fi
-
-
- { echo "$as_me:$LINENO: checking for isnan in <cmath>" >&5
-echo $ECHO_N "checking for isnan in <cmath>... $ECHO_C" >&6; }
-if test "${ac_cv_func_isnan_in_cmath+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-
- ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <cmath>
-int
-main ()
-{
-float f; isnan(f);
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_func_isnan_in_cmath=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_func_isnan_in_cmath=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_func_isnan_in_cmath" >&5
-echo "${ECHO_T}$ac_cv_func_isnan_in_cmath" >&6; }
-
-if test "$ac_cv_func_isnan_in_cmath" = "yes" ; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_ISNAN_IN_CMATH 1
-_ACEOF
-
-fi
-
-
- { echo "$as_me:$LINENO: checking for std::isnan in <cmath>" >&5
-echo $ECHO_N "checking for std::isnan in <cmath>... $ECHO_C" >&6; }
-if test "${ac_cv_func_std_isnan_in_cmath+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-
- ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <cmath>
-int
-main ()
-{
-float f; std::isnan(f);
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_func_std_isnan_in_cmath=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_func_std_isnan_in_cmath=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_func_std_isnan_in_cmath" >&5
-echo "${ECHO_T}$ac_cv_func_std_isnan_in_cmath" >&6; }
-
-if test "$ac_cv_func_std_isnan_in_cmath" = "yes" ; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_STD_ISNAN_IN_CMATH 1
-_ACEOF
-
-fi
-
-
-
-
- { echo "$as_me:$LINENO: checking for isinf in <math.h>" >&5
-echo $ECHO_N "checking for isinf in <math.h>... $ECHO_C" >&6; }
-if test "${ac_cv_func_isinf_in_math_h+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-
- ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <math.h>
-int
-main ()
-{
-float f; isinf(f);
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_func_isinf_in_math_h=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_func_isinf_in_math_h=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_func_isinf_in_math_h" >&5
-echo "${ECHO_T}$ac_cv_func_isinf_in_math_h" >&6; }
-
-if test "$ac_cv_func_isinf_in_math_h" = "yes" ; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_ISINF_IN_MATH_H 1
-_ACEOF
-
-fi
-
-
- { echo "$as_me:$LINENO: checking for isinf in <cmath>" >&5
-echo $ECHO_N "checking for isinf in <cmath>... $ECHO_C" >&6; }
-if test "${ac_cv_func_isinf_in_cmath+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-
- ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <cmath>
-int
-main ()
-{
-float f; isinf(f);
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_func_isinf_in_cmath=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_func_isinf_in_cmath=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_func_isinf_in_cmath" >&5
-echo "${ECHO_T}$ac_cv_func_isinf_in_cmath" >&6; }
-
-if test "$ac_cv_func_isinf_in_cmath" = "yes" ; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_ISINF_IN_CMATH 1
-_ACEOF
-
-fi
-
-
- { echo "$as_me:$LINENO: checking for std::isinf in <cmath>" >&5
-echo $ECHO_N "checking for std::isinf in <cmath>... $ECHO_C" >&6; }
-if test "${ac_cv_func_std_isinf_in_cmath+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-
- ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <cmath>
-int
-main ()
-{
-float f; std::isinf(f);
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_func_std_isinf_in_cmath=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_func_std_isinf_in_cmath=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_func_std_isinf_in_cmath" >&5
-echo "${ECHO_T}$ac_cv_func_std_isinf_in_cmath" >&6; }
-
-if test "$ac_cv_func_std_isinf_in_cmath" = "yes" ; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_STD_ISINF_IN_CMATH 1
-_ACEOF
-
-fi
-
-
- { echo "$as_me:$LINENO: checking for finite in <ieeefp.h>" >&5
-echo $ECHO_N "checking for finite in <ieeefp.h>... $ECHO_C" >&6; }
-if test "${ac_cv_func_finite_in_ieeefp_h+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-
- ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <ieeefp.h>
-int
-main ()
-{
-float f; finite(f);
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_func_finite_in_ieeefp_h=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_func_finite_in_ieeefp_h=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_func_finite_in_ieeefp_h" >&5
-echo "${ECHO_T}$ac_cv_func_finite_in_ieeefp_h" >&6; }
-
-if test "$ac_cv_func_finite_in_ieeefp_h" = "yes" ; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_FINITE_IN_IEEEFP_H 1
-_ACEOF
-
-fi
-
-
-
-if test "$llvm_cv_platform_type" = "Unix" ; then
-
-
-for ac_header in stdlib.h unistd.h
-do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- { echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-else
- # Is the header compilable?
-{ echo "$as_me:$LINENO: checking $ac_header usability" >&5
-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_header_compiler=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_header_compiler=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-echo "${ECHO_T}$ac_header_compiler" >&6; }
-
-# Is the header present?
-{ echo "$as_me:$LINENO: checking $ac_header presence" >&5
-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <$ac_header>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
- ac_header_preproc=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_header_preproc=no
-fi
-
-rm -f conftest.err conftest.$ac_ext
-{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-echo "${ECHO_T}$ac_header_preproc" >&6; }
-
-# So? What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
- yes:no: )
- { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
- ac_header_preproc=yes
- ;;
- no:yes:* )
- { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
-echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
-echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
- ( cat <<\_ASBOX
-## ------------------------------------ ##
-## Report this to http://llvm.org/bugs/ ##
-## ------------------------------------ ##
-_ASBOX
- ) | sed "s/^/$as_me: WARNING: /" >&2
- ;;
-esac
-{ echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- eval "$as_ac_Header=\$ac_header_preproc"
-fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-
-fi
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
- cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-
-done
-
-
-for ac_func in getpagesize
-do
-as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-{ echo "$as_me:$LINENO: checking for $ac_func" >&5
-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; }
-if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
- For example, HP-UX 11i <limits.h> declares gettimeofday. */
-#define $ac_func innocuous_$ac_func
-
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char $ac_func (); below.
- Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- <limits.h> exists even on freestanding compilers. */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef $ac_func
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char $ac_func ();
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined __stub_$ac_func || defined __stub___$ac_func
-choke me
-#endif
-
-int
-main ()
-{
-return $ac_func ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- eval "$as_ac_var=yes"
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- eval "$as_ac_var=no"
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-fi
-ac_res=`eval echo '${'$as_ac_var'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-if test `eval echo '${'$as_ac_var'}'` = yes; then
- cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-done
-
-{ echo "$as_me:$LINENO: checking for working mmap" >&5
-echo $ECHO_N "checking for working mmap... $ECHO_C" >&6; }
-if test "${ac_cv_func_mmap_fixed_mapped+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test "$cross_compiling" = yes; then
- ac_cv_func_mmap_fixed_mapped=no
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-/* malloc might have been renamed as rpl_malloc. */
-#undef malloc
-
-/* Thanks to Mike Haertel and Jim Avera for this test.
- Here is a matrix of mmap possibilities:
- mmap private not fixed
- mmap private fixed at somewhere currently unmapped
- mmap private fixed at somewhere already mapped
- mmap shared not fixed
- mmap shared fixed at somewhere currently unmapped
- mmap shared fixed at somewhere already mapped
- For private mappings, we should verify that changes cannot be read()
- back from the file, nor mmap's back from the file at a different
- address. (There have been systems where private was not correctly
- implemented like the infamous i386 svr4.0, and systems where the
- VM page cache was not coherent with the file system buffer cache
- like early versions of FreeBSD and possibly contemporary NetBSD.)
- For shared mappings, we should conversely verify that changes get
- propagated back to all the places they're supposed to be.
-
- Grep wants private fixed already mapped.
- The main things grep needs to know about mmap are:
- * does it exist and is it safe to write into the mmap'd area
- * how to use it (BSD variants) */
-
-#include <fcntl.h>
-#include <sys/mman.h>
-
-#if !STDC_HEADERS && !HAVE_STDLIB_H
-char *malloc ();
-#endif
-
-/* This mess was copied from the GNU getpagesize.h. */
-#if !HAVE_GETPAGESIZE
-/* Assume that all systems that can run configure have sys/param.h. */
-# if !HAVE_SYS_PARAM_H
-# define HAVE_SYS_PARAM_H 1
-# endif
-
-# ifdef _SC_PAGESIZE
-# define getpagesize() sysconf(_SC_PAGESIZE)
-# else /* no _SC_PAGESIZE */
-# if HAVE_SYS_PARAM_H
-# include <sys/param.h>
-# ifdef EXEC_PAGESIZE
-# define getpagesize() EXEC_PAGESIZE
-# else /* no EXEC_PAGESIZE */
-# ifdef NBPG
-# define getpagesize() NBPG * CLSIZE
-# ifndef CLSIZE
-# define CLSIZE 1
-# endif /* no CLSIZE */
-# else /* no NBPG */
-# ifdef NBPC
-# define getpagesize() NBPC
-# else /* no NBPC */
-# ifdef PAGESIZE
-# define getpagesize() PAGESIZE
-# endif /* PAGESIZE */
-# endif /* no NBPC */
-# endif /* no NBPG */
-# endif /* no EXEC_PAGESIZE */
-# else /* no HAVE_SYS_PARAM_H */
-# define getpagesize() 8192 /* punt totally */
-# endif /* no HAVE_SYS_PARAM_H */
-# endif /* no _SC_PAGESIZE */
-
-#endif /* no HAVE_GETPAGESIZE */
-
-int
-main ()
-{
- char *data, *data2, *data3;
- int i, pagesize;
- int fd;
-
- pagesize = getpagesize ();
-
- /* First, make a file with some known garbage in it. */
- data = (char *) malloc (pagesize);
- if (!data)
- return 1;
- for (i = 0; i < pagesize; ++i)
- *(data + i) = rand ();
- umask (0);
- fd = creat ("conftest.mmap", 0600);
- if (fd < 0)
- return 1;
- if (write (fd, data, pagesize) != pagesize)
- return 1;
- close (fd);
-
- /* Next, try to mmap the file at a fixed address which already has
- something else allocated at it. If we can, also make sure that
- we see the same garbage. */
- fd = open ("conftest.mmap", O_RDWR);
- if (fd < 0)
- return 1;
- data2 = (char *) malloc (2 * pagesize);
- if (!data2)
- return 1;
- data2 += (pagesize - ((long int) data2 & (pagesize - 1))) & (pagesize - 1);
- if (data2 != mmap (data2, pagesize, PROT_READ | PROT_WRITE,
- MAP_PRIVATE | MAP_FIXED, fd, 0L))
- return 1;
- for (i = 0; i < pagesize; ++i)
- if (*(data + i) != *(data2 + i))
- return 1;
-
- /* Finally, make sure that changes to the mapped area do not
- percolate back to the file as seen by read(). (This is a bug on
- some variants of i386 svr4.0.) */
- for (i = 0; i < pagesize; ++i)
- *(data2 + i) = *(data2 + i) + 1;
- data3 = (char *) malloc (pagesize);
- if (!data3)
- return 1;
- if (read (fd, data3, pagesize) != pagesize)
- return 1;
- for (i = 0; i < pagesize; ++i)
- if (*(data + i) != *(data3 + i))
- return 1;
- close (fd);
- return 0;
-}
-_ACEOF
-rm -f conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_func_mmap_fixed_mapped=yes
-else
- echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
-ac_cv_func_mmap_fixed_mapped=no
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-
-
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_func_mmap_fixed_mapped" >&5
-echo "${ECHO_T}$ac_cv_func_mmap_fixed_mapped" >&6; }
-if test $ac_cv_func_mmap_fixed_mapped = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_MMAP 1
-_ACEOF
-
-fi
-rm -f conftest.mmap
-
- { echo "$as_me:$LINENO: checking for mmap of files" >&5
-echo $ECHO_N "checking for mmap of files... $ECHO_C" >&6; }
-if test "${ac_cv_func_mmap_file+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
- if test "$cross_compiling" = yes; then
- ac_cv_func_mmap_file=no
-else
- cat >conftest.$ac_ext <<_ACEOF
-
- /* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-#include <sys/types.h>
-#include <sys/mman.h>
-#include <fcntl.h>
-
-int
-main ()
-{
-
- int fd;
- fd = creat ("foo",0777);
- fd = (int) mmap (0, 1, PROT_READ, MAP_SHARED, fd, 0);
- unlink ("foo");
- return (fd != (int) MAP_FAILED);
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_func_mmap_file=yes
-else
- echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
-ac_cv_func_mmap_file=no
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-
-
- ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_func_mmap_file" >&5
-echo "${ECHO_T}$ac_cv_func_mmap_file" >&6; }
-if test "$ac_cv_func_mmap_file" = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_MMAP_FILE
-_ACEOF
-
- MMAP_FILE=yes
-
-fi
-
- { echo "$as_me:$LINENO: checking if /dev/zero is needed for mmap" >&5
-echo $ECHO_N "checking if /dev/zero is needed for mmap... $ECHO_C" >&6; }
-if test "${ac_cv_need_dev_zero_for_mmap+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test "$llvm_cv_os_type" = "Interix" ; then
- ac_cv_need_dev_zero_for_mmap=yes
- else
- ac_cv_need_dev_zero_for_mmap=no
- fi
-
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_need_dev_zero_for_mmap" >&5
-echo "${ECHO_T}$ac_cv_need_dev_zero_for_mmap" >&6; }
-if test "$ac_cv_need_dev_zero_for_mmap" = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define NEED_DEV_ZERO_FOR_MMAP 1
-_ACEOF
-
-fi
-
- if test "$ac_cv_func_mmap_fixed_mapped" = "no"
- then
- { echo "$as_me:$LINENO: WARNING: mmap() of a fixed address required but not supported" >&5
-echo "$as_me: WARNING: mmap() of a fixed address required but not supported" >&2;}
- fi
- if test "$ac_cv_func_mmap_file" = "no"
- then
- { echo "$as_me:$LINENO: WARNING: mmap() of files required but not found" >&5
-echo "$as_me: WARNING: mmap() of files required but not found" >&2;}
- fi
-fi
-
-{ echo "$as_me:$LINENO: checking for GCC atomic builtins" >&5
-echo $ECHO_N "checking for GCC atomic builtins... $ECHO_C" >&6; }
-ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
-cat >conftest.$ac_ext <<_ACEOF
-
- /* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
- int main() {
- volatile unsigned long val = 1;
- __sync_synchronize();
- __sync_val_compare_and_swap(&val, 1, 0);
- __sync_add_and_fetch(&val, 1);
- __sync_sub_and_fetch(&val, 1);
- return 0;
- }
-
-
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
-
- { echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6; }
-
-cat >>confdefs.h <<\_ACEOF
-#define LLVM_HAS_ATOMICS 1
-_ACEOF
-
-
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-
-cat >>confdefs.h <<\_ACEOF
-#define LLVM_HAS_ATOMICS 0
-_ACEOF
-
- { echo "$as_me:$LINENO: WARNING: LLVM will be built thread-unsafe because atomic builtins are missing" >&5
-echo "$as_me: WARNING: LLVM will be built thread-unsafe because atomic builtins are missing" >&2;}
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-
-if test "$llvm_cv_os_type" = "Linux" -a "$llvm_cv_target_arch" = "x86_64" ; then
- { echo "$as_me:$LINENO: checking for 32-bit userspace on 64-bit system" >&5
-echo $ECHO_N "checking for 32-bit userspace on 64-bit system... $ECHO_C" >&6; }
-if test "${llvm_cv_linux_mixed+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#ifndef __x86_64__
- error: Not x86-64 even if uname says so!
- #endif
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- llvm_cv_linux_mixed=no
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- llvm_cv_linux_mixed=yes
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-fi
-{ echo "$as_me:$LINENO: result: $llvm_cv_linux_mixed" >&5
-echo "${ECHO_T}$llvm_cv_linux_mixed" >&6; }
-
- if test "$llvm_cv_linux_mixed" = "yes"; then
- llvm_cv_target_arch="x86"
- ARCH="x86"
- fi
-fi
-
-
-for ac_func in __dso_handle
-do
-as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-{ echo "$as_me:$LINENO: checking for $ac_func" >&5
-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; }
-if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
- For example, HP-UX 11i <limits.h> declares gettimeofday. */
-#define $ac_func innocuous_$ac_func
-
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char $ac_func (); below.
- Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- <limits.h> exists even on freestanding compilers. */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef $ac_func
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char $ac_func ();
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined __stub_$ac_func || defined __stub___$ac_func
-choke me
-#endif
-
-int
-main ()
-{
-return $ac_func ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- eval "$as_ac_var=yes"
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- eval "$as_ac_var=no"
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-fi
-ac_res=`eval echo '${'$as_ac_var'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-if test `eval echo '${'$as_ac_var'}'` = yes; then
- cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-done
-
-
-SHLIBEXT=$libltdl_cv_shlibext
-
-
-SHLIBPATH_VAR=$libltdl_cv_shlibpath_var
-
-
-if test "${prefix}" = "NONE" ; then
- prefix="/usr/local"
-fi
-eval LLVM_PREFIX="${prefix}";
-eval LLVM_BINDIR="${prefix}/bin";
-eval LLVM_LIBDIR="${prefix}/lib";
-eval LLVM_DATADIR="${prefix}/share/llvm";
-eval LLVM_DOCSDIR="${prefix}/share/doc/llvm";
-eval LLVM_ETCDIR="${prefix}/etc/llvm";
-eval LLVM_INCLUDEDIR="${prefix}/include";
-eval LLVM_INFODIR="${prefix}/info";
-eval LLVM_MANDIR="${prefix}/man";
-LLVM_CONFIGTIME=`date`
-
-
-
-
-
-
-
-
-
-
-
-if test "${ENABLE_TIMESTAMPS}" = "0"; then
- LLVM_CONFIGTIME="(timestamp not enabled)"
-fi
-
-
-cat >>confdefs.h <<_ACEOF
-#define LLVM_PREFIX "$LLVM_PREFIX"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define LLVM_BINDIR "$LLVM_BINDIR"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define LLVM_LIBDIR "$LLVM_LIBDIR"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define LLVM_DATADIR "$LLVM_DATADIR"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define LLVM_DOCSDIR "$LLVM_DOCSDIR"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define LLVM_ETCDIR "$LLVM_ETCDIR"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define LLVM_INCLUDEDIR "$LLVM_INCLUDEDIR"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define LLVM_INFODIR "$LLVM_INFODIR"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define LLVM_MANDIR "$LLVM_MANDIR"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define LLVM_CONFIGTIME "$LLVM_CONFIGTIME"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define LLVM_HOST_TRIPLE "$host"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define LLVM_DEFAULT_TARGET_TRIPLE "$target"
-_ACEOF
-
-
-if test "$BINDINGS_TO_BUILD" = auto ; then
- BINDINGS_TO_BUILD=""
- if test "x$OCAMLC" != x -a "x$OCAMLDEP" != x ; then
- BINDINGS_TO_BUILD="ocaml $BINDINGS_TO_BUILD"
- fi
-fi
-BINDINGS_TO_BUILD=$BINDINGS_TO_BUILD
-
-
-ALL_BINDINGS=ocaml
-
-
-binding_prereqs_failed=0
-for a_binding in $BINDINGS_TO_BUILD ; do
- case "$a_binding" in
- ocaml)
- if test "x$OCAMLC" = x ; then
- { echo "$as_me:$LINENO: WARNING: --enable-bindings=ocaml specified, but ocamlc not found. Try configure OCAMLC=/path/to/ocamlc" >&5
-echo "$as_me: WARNING: --enable-bindings=ocaml specified, but ocamlc not found. Try configure OCAMLC=/path/to/ocamlc" >&2;}
- binding_prereqs_failed=1
- fi
- if test "x$OCAMLDEP" = x ; then
- { echo "$as_me:$LINENO: WARNING: --enable-bindings=ocaml specified, but ocamldep not found. Try configure OCAMLDEP=/path/to/ocamldep" >&5
-echo "$as_me: WARNING: --enable-bindings=ocaml specified, but ocamldep not found. Try configure OCAMLDEP=/path/to/ocamldep" >&2;}
- binding_prereqs_failed=1
- fi
- if test "x$OCAMLOPT" = x ; then
- { echo "$as_me:$LINENO: WARNING: --enable-bindings=ocaml specified, but ocamlopt not found. Try configure OCAMLOPT=/path/to/ocamlopt" >&5
-echo "$as_me: WARNING: --enable-bindings=ocaml specified, but ocamlopt not found. Try configure OCAMLOPT=/path/to/ocamlopt" >&2;}
- fi
- if test "x$with_ocaml_libdir" != xauto ; then
- OCAML_LIBDIR=$with_ocaml_libdir
-
- else
- ocaml_stdlib="`"$OCAMLC" -where`"
- if test "$LLVM_PREFIX" '<' "$ocaml_stdlib" -a "$ocaml_stdlib" '<' "$LLVM_PREFIX~"
- then
- # ocaml stdlib is beneath our prefix; use stdlib
- OCAML_LIBDIR=$ocaml_stdlib
-
- else
- # ocaml stdlib is outside our prefix; use libdir/ocaml
- OCAML_LIBDIR=$LLVM_LIBDIR/ocaml
-
- fi
- fi
- ;;
- esac
-done
-if test "$binding_prereqs_failed" = 1 ; then
- { { echo "$as_me:$LINENO: error: Prequisites for bindings not satisfied. Fix them or use configure --disable-bindings." >&5
-echo "$as_me: error: Prequisites for bindings not satisfied. Fix them or use configure --disable-bindings." >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-{ echo "$as_me:$LINENO: checking for compiler -fvisibility-inlines-hidden option" >&5
-echo $ECHO_N "checking for compiler -fvisibility-inlines-hidden option... $ECHO_C" >&6; }
-if test "${llvm_cv_cxx_visibility_inlines_hidden+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
- oldcxxflags="$CXXFLAGS"
- CXXFLAGS="$CXXFLAGS -O0 -fvisibility-inlines-hidden -Werror"
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-template <typename T> struct X { void __attribute__((noinline)) f() {} };
-int
-main ()
-{
-X<int>().f();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- llvm_cv_cxx_visibility_inlines_hidden=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- llvm_cv_cxx_visibility_inlines_hidden=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- CXXFLAGS="$oldcxxflags"
- ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-fi
-{ echo "$as_me:$LINENO: result: $llvm_cv_cxx_visibility_inlines_hidden" >&5
-echo "${ECHO_T}$llvm_cv_cxx_visibility_inlines_hidden" >&6; }
-if test "$llvm_cv_cxx_visibility_inlines_hidden" = yes ; then
- ENABLE_VISIBILITY_INLINES_HIDDEN=1
-
-else
- ENABLE_VISIBILITY_INLINES_HIDDEN=0
-
-fi
-
-
-if test "$llvm_cv_link_use_r" = "yes" ; then
- RPATH="-Wl,-R"
-else
- RPATH="-Wl,-rpath"
-fi
-
-
-if test "$llvm_cv_link_use_export_dynamic" = "yes" ; then
- RDYNAMIC="-Wl,-export-dynamic"
-else
- RDYNAMIC=""
-fi
-
-
-
-ac_config_headers="$ac_config_headers include/llvm/Config/config.h include/llvm/Config/llvm-config.h"
-
-
-
-
-
-
-ac_config_files="$ac_config_files include/llvm/Config/Targets.def"
-
-ac_config_files="$ac_config_files include/llvm/Config/AsmPrinters.def"
-
-ac_config_files="$ac_config_files include/llvm/Config/AsmParsers.def"
-
-ac_config_files="$ac_config_files include/llvm/Config/Disassemblers.def"
-
-ac_config_headers="$ac_config_headers include/llvm/Support/DataTypes.h"
-
-
-ac_config_files="$ac_config_files Makefile.config"
-
-
-ac_config_files="$ac_config_files llvm.spec"
-
-
-ac_config_files="$ac_config_files docs/doxygen.cfg"
-
-
-if test "${clang_src_root}" = ""; then
- clang_src_root="$srcdir/tools/clang"
-fi
-if test -f ${clang_src_root}/README.txt; then
- configh="include/clang/Config/config.h"
- doxy="docs/doxygen.cfg"
- ac_config_headers="$ac_config_headers tools/clang/${configh}:${clang_src_root}/${configh}.in"
-
- ac_config_files="$ac_config_files tools/clang/${doxy}:${clang_src_root}/${doxy}.in"
-
-fi
-
-ac_config_files="$ac_config_files bindings/ocaml/llvm/META.llvm"
-
-
-test "x$program_prefix" = "xNONE" && program_prefix=""
-
-
-
-ac_config_commands="$ac_config_commands setup"
-
-ac_config_commands="$ac_config_commands Makefile"
-
-
-ac_config_commands="$ac_config_commands Makefile.common"
-
-
-ac_config_commands="$ac_config_commands examples/Makefile"
-
-
-ac_config_commands="$ac_config_commands lib/Makefile"
-
-
-ac_config_commands="$ac_config_commands runtime/Makefile"
-
-
-ac_config_commands="$ac_config_commands test/Makefile"
-
-
-ac_config_commands="$ac_config_commands test/Makefile.tests"
-
-
-ac_config_commands="$ac_config_commands unittests/Makefile"
-
-
-ac_config_commands="$ac_config_commands tools/Makefile"
-
-
-ac_config_commands="$ac_config_commands utils/Makefile"
-
-
-ac_config_commands="$ac_config_commands projects/Makefile"
-
-
-ac_config_commands="$ac_config_commands bindings/Makefile"
-
-
-ac_config_commands="$ac_config_commands bindings/ocaml/Makefile.ocaml"
-
-
-
-cat >confcache <<\_ACEOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs, see configure's option --config-cache.
-# It is not useful on other systems. If it contains results you don't
-# want to keep, you may remove or edit it.
-#
-# config.status only pays attention to the cache file if you give it
-# the --recheck option to rerun configure.
-#
-# `ac_cv_env_foo' variables (set or unset) will be overridden when
-# loading this file, other *unset* `ac_cv_foo' will be assigned the
-# following values.
-
-_ACEOF
-
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, we kill variables containing newlines.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(
- for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
- eval ac_val=\$$ac_var
- case $ac_val in #(
- *${as_nl}*)
- case $ac_var in #(
- *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
-echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
- esac
- case $ac_var in #(
- _ | IFS | as_nl) ;; #(
- *) $as_unset $ac_var ;;
- esac ;;
- esac
- done
-
- (set) 2>&1 |
- case $as_nl`(ac_space=' '; set) 2>&1` in #(
- *${as_nl}ac_space=\ *)
- # `set' does not quote correctly, so add quotes (double-quote
- # substitution turns \\\\ into \\, and sed turns \\ into \).
- sed -n \
- "s/'/'\\\\''/g;
- s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
- ;; #(
- *)
- # `set' quotes correctly as required by POSIX, so do not add quotes.
- sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
- ;;
- esac |
- sort
-) |
- sed '
- /^ac_cv_env_/b end
- t clear
- :clear
- s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
- t end
- s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
- :end' >>confcache
-if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
- if test -w "$cache_file"; then
- test "x$cache_file" != "x/dev/null" &&
- { echo "$as_me:$LINENO: updating cache $cache_file" >&5
-echo "$as_me: updating cache $cache_file" >&6;}
- cat confcache >$cache_file
- else
- { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5
-echo "$as_me: not updating unwritable cache $cache_file" >&6;}
- fi
-fi
-rm -f confcache
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-DEFS=-DHAVE_CONFIG_H
-
-ac_libobjs=
-ac_ltlibobjs=
-for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
- # 1. Remove the extension, and $U if already installed.
- ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
- ac_i=`echo "$ac_i" | sed "$ac_script"`
- # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR
- # will be set to the directory where LIBOBJS objects are built.
- ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext"
- ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo'
-done
-LIBOBJS=$ac_libobjs
-
-LTLIBOBJS=$ac_ltlibobjs
-
-
-if test -z "${INSTALL_LTDL_TRUE}" && test -z "${INSTALL_LTDL_FALSE}"; then
- { { echo "$as_me:$LINENO: error: conditional \"INSTALL_LTDL\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-echo "$as_me: error: conditional \"INSTALL_LTDL\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-if test -z "${CONVENIENCE_LTDL_TRUE}" && test -z "${CONVENIENCE_LTDL_FALSE}"; then
- { { echo "$as_me:$LINENO: error: conditional \"CONVENIENCE_LTDL\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-echo "$as_me: error: conditional \"CONVENIENCE_LTDL\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-: ${CONFIG_STATUS=./config.status}
-ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files $CONFIG_STATUS"
-{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
-echo "$as_me: creating $CONFIG_STATUS" >&6;}
-cat >$CONFIG_STATUS <<_ACEOF
-#! $SHELL
-# Generated by $as_me.
-# Run this file to recreate the current configuration.
-# Compiler output produced by configure, useful for debugging
-# configure, is in config.log if it exists.
-
-debug=false
-ac_cs_recheck=false
-ac_cs_silent=false
-SHELL=\${CONFIG_SHELL-$SHELL}
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-## --------------------- ##
-## M4sh Initialization. ##
-## --------------------- ##
-
-# Be Bourne compatible
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
- emulate sh
- NULLCMD=:
- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
- setopt NO_GLOB_SUBST
-else
- case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
-fi
-BIN_SH=xpg4; export BIN_SH # for Tru64
-DUALCASE=1; export DUALCASE # for MKS sh
-
-
-# PATH needs CR
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- echo "#! /bin/sh" >conf$$.sh
- echo "exit 0" >>conf$$.sh
- chmod +x conf$$.sh
- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
- PATH_SEPARATOR=';'
- else
- PATH_SEPARATOR=:
- fi
- rm -f conf$$.sh
-fi
-
-# Support unset when possible.
-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
- as_unset=unset
-else
- as_unset=false
-fi
-
-
-# IFS
-# We need space, tab and new line, in precisely that order. Quoting is
-# there to prevent editors from complaining about space-tab.
-# (If _AS_PATH_WALK were called with IFS unset, it would disable word
-# splitting by setting IFS to empty value.)
-as_nl='
-'
-IFS=" "" $as_nl"
-
-# Find who we are. Look in the path if we contain no directory separator.
-case $0 in
- *[\\/]* ) as_myself=$0 ;;
- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
-IFS=$as_save_IFS
-
- ;;
-esac
-# We did not find ourselves, most probably we were run as `sh COMMAND'
-# in which case we are not to be found in the path.
-if test "x$as_myself" = x; then
- as_myself=$0
-fi
-if test ! -f "$as_myself"; then
- echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
- { (exit 1); exit 1; }
-fi
-
-# Work around bugs in pre-3.0 UWIN ksh.
-for as_var in ENV MAIL MAILPATH
-do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-done
-PS1='$ '
-PS2='> '
-PS4='+ '
-
-# NLS nuisances.
-for as_var in \
- LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
- LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
- LC_TELEPHONE LC_TIME
-do
- if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
- eval $as_var=C; export $as_var
- else
- ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
- fi
-done
-
-# Required to use basename.
-if expr a : '\(a\)' >/dev/null 2>&1 &&
- test "X`expr 00001 : '.*\(...\)'`" = X001; then
- as_expr=expr
-else
- as_expr=false
-fi
-
-if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
- as_basename=basename
-else
- as_basename=false
-fi
-
-
-# Name of the executable.
-as_me=`$as_basename -- "$0" ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
- X"$0" : 'X\(//\)$' \| \
- X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-echo X/"$0" |
- sed '/^.*\/\([^/][^/]*\)\/*$/{
- s//\1/
- q
- }
- /^X\/\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\/\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
-
-# CDPATH.
-$as_unset CDPATH
-
-
-
- as_lineno_1=$LINENO
- as_lineno_2=$LINENO
- test "x$as_lineno_1" != "x$as_lineno_2" &&
- test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
-
- # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
- # uniformly replaced by the line number. The first 'sed' inserts a
- # line-number line after each line using $LINENO; the second 'sed'
- # does the real work. The second script uses 'N' to pair each
- # line-number line with the line containing $LINENO, and appends
- # trailing '-' during substitution so that $LINENO is not a special
- # case at line end.
- # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
- # scripts with optimization help from Paolo Bonzini. Blame Lee
- # E. McMahon (1931-1989) for sed's syntax. :-)
- sed -n '
- p
- /[$]LINENO/=
- ' <$as_myself |
- sed '
- s/[$]LINENO.*/&-/
- t lineno
- b
- :lineno
- N
- :loop
- s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
- t loop
- s/-\n.*//
- ' >$as_me.lineno &&
- chmod +x "$as_me.lineno" ||
- { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
- { (exit 1); exit 1; }; }
-
- # Don't try to exec as it changes $[0], causing all sort of problems
- # (the dirname of $[0] is not the place where we might find the
- # original and so on. Autoconf is especially sensitive to this).
- . "./$as_me.lineno"
- # Exit status is that of the last command.
- exit
-}
-
-
-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
- as_dirname=dirname
-else
- as_dirname=false
-fi
-
-ECHO_C= ECHO_N= ECHO_T=
-case `echo -n x` in
--n*)
- case `echo 'x\c'` in
- *c*) ECHO_T=' ';; # ECHO_T is single tab character.
- *) ECHO_C='\c';;
- esac;;
-*)
- ECHO_N='-n';;
-esac
-
-if expr a : '\(a\)' >/dev/null 2>&1 &&
- test "X`expr 00001 : '.*\(...\)'`" = X001; then
- as_expr=expr
-else
- as_expr=false
-fi
-
-rm -f conf$$ conf$$.exe conf$$.file
-if test -d conf$$.dir; then
- rm -f conf$$.dir/conf$$.file
-else
- rm -f conf$$.dir
- mkdir conf$$.dir
-fi
-echo >conf$$.file
-if ln -s conf$$.file conf$$ 2>/dev/null; then
- as_ln_s='ln -s'
- # ... but there are two gotchas:
- # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
- # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
- # In both cases, we have to default to `cp -p'.
- ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
- as_ln_s='cp -p'
-elif ln conf$$.file conf$$ 2>/dev/null; then
- as_ln_s=ln
-else
- as_ln_s='cp -p'
-fi
-rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
-rmdir conf$$.dir 2>/dev/null
-
-if mkdir -p . 2>/dev/null; then
- as_mkdir_p=:
-else
- test -d ./-p && rmdir ./-p
- as_mkdir_p=false
-fi
-
-# Find out whether ``test -x'' works. Don't use a zero-byte file, as
-# systems may use methods other than mode bits to determine executability.
-cat >conf$$.file <<_ASEOF
-#! /bin/sh
-exit 0
-_ASEOF
-chmod +x conf$$.file
-if test -x conf$$.file >/dev/null 2>&1; then
- as_executable_p="test -x"
-else
- as_executable_p=:
-fi
-rm -f conf$$.file
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
-
-exec 6>&1
-
-# Save the log message, to keep $[0] and so on meaningful, and to
-# report actual input values of CONFIG_FILES etc. instead of their
-# values after options handling.
-ac_log="
-This file was extended by LLVM $as_me 3.3, which was
-generated by GNU Autoconf 2.60. Invocation command line was
-
- CONFIG_FILES = $CONFIG_FILES
- CONFIG_HEADERS = $CONFIG_HEADERS
- CONFIG_LINKS = $CONFIG_LINKS
- CONFIG_COMMANDS = $CONFIG_COMMANDS
- $ $0 $@
-
-on `(hostname || uname -n) 2>/dev/null | sed 1q`
-"
-
-_ACEOF
-
-cat >>$CONFIG_STATUS <<_ACEOF
-# Files that config.status was made for.
-config_files="$ac_config_files"
-config_headers="$ac_config_headers"
-config_commands="$ac_config_commands"
-
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-ac_cs_usage="\
-\`$as_me' instantiates files from templates according to the
-current configuration.
-
-Usage: $0 [OPTIONS] [FILE]...
-
- -h, --help print this help, then exit
- -V, --version print version number, then exit
- -q, --quiet do not print progress messages
- -d, --debug don't remove temporary files
- --recheck update $as_me by reconfiguring in the same conditions
- --file=FILE[:TEMPLATE]
- instantiate the configuration file FILE
- --header=FILE[:TEMPLATE]
- instantiate the configuration header FILE
-
-Configuration files:
-$config_files
-
-Configuration headers:
-$config_headers
-
-Configuration commands:
-$config_commands
-
-Report bugs to <bug-autoconf at gnu.org>."
-
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
-ac_cs_version="\\
-LLVM config.status 3.3
-configured by $0, generated by GNU Autoconf 2.60,
- with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
-
-Copyright (C) 2006 Free Software Foundation, Inc.
-This config.status script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it."
-
-ac_pwd='$ac_pwd'
-srcdir='$srcdir'
-INSTALL='$INSTALL'
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-# If no file are specified by the user, then we need to provide default
-# value. By we need to know if files were specified by the user.
-ac_need_defaults=:
-while test $# != 0
-do
- case $1 in
- --*=*)
- ac_option=`expr "X$1" : 'X\([^=]*\)='`
- ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
- ac_shift=:
- ;;
- *)
- ac_option=$1
- ac_optarg=$2
- ac_shift=shift
- ;;
- esac
-
- case $ac_option in
- # Handling of the options.
- -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
- ac_cs_recheck=: ;;
- --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
- echo "$ac_cs_version"; exit ;;
- --debug | --debu | --deb | --de | --d | -d )
- debug=: ;;
- --file | --fil | --fi | --f )
- $ac_shift
- CONFIG_FILES="$CONFIG_FILES $ac_optarg"
- ac_need_defaults=false;;
- --header | --heade | --head | --hea )
- $ac_shift
- CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
- ac_need_defaults=false;;
- --he | --h)
- # Conflict between --help and --header
- { echo "$as_me: error: ambiguous option: $1
-Try \`$0 --help' for more information." >&2
- { (exit 1); exit 1; }; };;
- --help | --hel | -h )
- echo "$ac_cs_usage"; exit ;;
- -q | -quiet | --quiet | --quie | --qui | --qu | --q \
- | -silent | --silent | --silen | --sile | --sil | --si | --s)
- ac_cs_silent=: ;;
-
- # This is an error.
- -*) { echo "$as_me: error: unrecognized option: $1
-Try \`$0 --help' for more information." >&2
- { (exit 1); exit 1; }; } ;;
-
- *) ac_config_targets="$ac_config_targets $1"
- ac_need_defaults=false ;;
-
- esac
- shift
-done
-
-ac_configure_extra_args=
-
-if $ac_cs_silent; then
- exec 6>/dev/null
- ac_configure_extra_args="$ac_configure_extra_args --silent"
-fi
-
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
-if \$ac_cs_recheck; then
- echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
- CONFIG_SHELL=$SHELL
- export CONFIG_SHELL
- exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
-fi
-
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
-exec 5>>config.log
-{
- echo
- sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
-## Running $as_me. ##
-_ASBOX
- echo "$ac_log"
-} >&5
-
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
-#
-# INIT-COMMANDS
-#
-llvm_src="${srcdir}"
-
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-
-# Handling of arguments.
-for ac_config_target in $ac_config_targets
-do
- case $ac_config_target in
- "include/llvm/Config/config.h") CONFIG_HEADERS="$CONFIG_HEADERS include/llvm/Config/config.h" ;;
- "include/llvm/Config/llvm-config.h") CONFIG_HEADERS="$CONFIG_HEADERS include/llvm/Config/llvm-config.h" ;;
- "include/llvm/Config/Targets.def") CONFIG_FILES="$CONFIG_FILES include/llvm/Config/Targets.def" ;;
- "include/llvm/Config/AsmPrinters.def") CONFIG_FILES="$CONFIG_FILES include/llvm/Config/AsmPrinters.def" ;;
- "include/llvm/Config/AsmParsers.def") CONFIG_FILES="$CONFIG_FILES include/llvm/Config/AsmParsers.def" ;;
- "include/llvm/Config/Disassemblers.def") CONFIG_FILES="$CONFIG_FILES include/llvm/Config/Disassemblers.def" ;;
- "include/llvm/Support/DataTypes.h") CONFIG_HEADERS="$CONFIG_HEADERS include/llvm/Support/DataTypes.h" ;;
- "Makefile.config") CONFIG_FILES="$CONFIG_FILES Makefile.config" ;;
- "llvm.spec") CONFIG_FILES="$CONFIG_FILES llvm.spec" ;;
- "docs/doxygen.cfg") CONFIG_FILES="$CONFIG_FILES docs/doxygen.cfg" ;;
- "tools/clang/${configh}") CONFIG_HEADERS="$CONFIG_HEADERS tools/clang/${configh}:${clang_src_root}/${configh}.in" ;;
- "tools/clang/${doxy}") CONFIG_FILES="$CONFIG_FILES tools/clang/${doxy}:${clang_src_root}/${doxy}.in" ;;
- "bindings/ocaml/llvm/META.llvm") CONFIG_FILES="$CONFIG_FILES bindings/ocaml/llvm/META.llvm" ;;
- "setup") CONFIG_COMMANDS="$CONFIG_COMMANDS setup" ;;
- "Makefile") CONFIG_COMMANDS="$CONFIG_COMMANDS Makefile" ;;
- "Makefile.common") CONFIG_COMMANDS="$CONFIG_COMMANDS Makefile.common" ;;
- "examples/Makefile") CONFIG_COMMANDS="$CONFIG_COMMANDS examples/Makefile" ;;
- "lib/Makefile") CONFIG_COMMANDS="$CONFIG_COMMANDS lib/Makefile" ;;
- "runtime/Makefile") CONFIG_COMMANDS="$CONFIG_COMMANDS runtime/Makefile" ;;
- "test/Makefile") CONFIG_COMMANDS="$CONFIG_COMMANDS test/Makefile" ;;
- "test/Makefile.tests") CONFIG_COMMANDS="$CONFIG_COMMANDS test/Makefile.tests" ;;
- "unittests/Makefile") CONFIG_COMMANDS="$CONFIG_COMMANDS unittests/Makefile" ;;
- "tools/Makefile") CONFIG_COMMANDS="$CONFIG_COMMANDS tools/Makefile" ;;
- "utils/Makefile") CONFIG_COMMANDS="$CONFIG_COMMANDS utils/Makefile" ;;
- "projects/Makefile") CONFIG_COMMANDS="$CONFIG_COMMANDS projects/Makefile" ;;
- "bindings/Makefile") CONFIG_COMMANDS="$CONFIG_COMMANDS bindings/Makefile" ;;
- "bindings/ocaml/Makefile.ocaml") CONFIG_COMMANDS="$CONFIG_COMMANDS bindings/ocaml/Makefile.ocaml" ;;
-
- *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
-echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
- { (exit 1); exit 1; }; };;
- esac
-done
-
-
-# If the user did not use the arguments to specify the items to instantiate,
-# then the envvar interface is used. Set only those that are not.
-# We use the long form for the default assignment because of an extremely
-# bizarre bug on SunOS 4.1.3.
-if $ac_need_defaults; then
- test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
- test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
- test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
-fi
-
-# Have a temporary directory for convenience. Make it in the build tree
-# simply because there is no reason against having it here, and in addition,
-# creating and moving files from /tmp can sometimes cause problems.
-# Hook for its removal unless debugging.
-# Note that there is a small window in which the directory will not be cleaned:
-# after its creation but before its name has been assigned to `$tmp'.
-$debug ||
-{
- tmp=
- trap 'exit_status=$?
- { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status
-' 0
- trap '{ (exit 1); exit 1; }' 1 2 13 15
-}
-# Create a (secure) tmp directory for tmp files.
-
-{
- tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
- test -n "$tmp" && test -d "$tmp"
-} ||
-{
- tmp=./conf$$-$RANDOM
- (umask 077 && mkdir "$tmp")
-} ||
-{
- echo "$me: cannot create a temporary directory in ." >&2
- { (exit 1); exit 1; }
-}
-
-#
-# Set up the sed scripts for CONFIG_FILES section.
-#
-
-# No need to generate the scripts if there are no CONFIG_FILES.
-# This happens for instance when ./config.status config.h
-if test -n "$CONFIG_FILES"; then
-
-_ACEOF
-
-
-
-ac_delim='%!_!# '
-for ac_last_try in false false false false false :; do
- cat >conf$$subs.sed <<_ACEOF
-SHELL!$SHELL$ac_delim
-PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim
-PACKAGE_NAME!$PACKAGE_NAME$ac_delim
-PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim
-PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim
-PACKAGE_STRING!$PACKAGE_STRING$ac_delim
-PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim
-exec_prefix!$exec_prefix$ac_delim
-prefix!$prefix$ac_delim
-program_transform_name!$program_transform_name$ac_delim
-bindir!$bindir$ac_delim
-sbindir!$sbindir$ac_delim
-libexecdir!$libexecdir$ac_delim
-datarootdir!$datarootdir$ac_delim
-datadir!$datadir$ac_delim
-sysconfdir!$sysconfdir$ac_delim
-sharedstatedir!$sharedstatedir$ac_delim
-localstatedir!$localstatedir$ac_delim
-includedir!$includedir$ac_delim
-oldincludedir!$oldincludedir$ac_delim
-docdir!$docdir$ac_delim
-infodir!$infodir$ac_delim
-htmldir!$htmldir$ac_delim
-dvidir!$dvidir$ac_delim
-pdfdir!$pdfdir$ac_delim
-psdir!$psdir$ac_delim
-libdir!$libdir$ac_delim
-localedir!$localedir$ac_delim
-mandir!$mandir$ac_delim
-DEFS!$DEFS$ac_delim
-ECHO_C!$ECHO_C$ac_delim
-ECHO_N!$ECHO_N$ac_delim
-ECHO_T!$ECHO_T$ac_delim
-LIBS!$LIBS$ac_delim
-build_alias!$build_alias$ac_delim
-host_alias!$host_alias$ac_delim
-target_alias!$target_alias$ac_delim
-LLVM_COPYRIGHT!$LLVM_COPYRIGHT$ac_delim
-CC!$CC$ac_delim
-CFLAGS!$CFLAGS$ac_delim
-LDFLAGS!$LDFLAGS$ac_delim
-CPPFLAGS!$CPPFLAGS$ac_delim
-ac_ct_CC!$ac_ct_CC$ac_delim
-EXEEXT!$EXEEXT$ac_delim
-OBJEXT!$OBJEXT$ac_delim
-CXX!$CXX$ac_delim
-CXXFLAGS!$CXXFLAGS$ac_delim
-ac_ct_CXX!$ac_ct_CXX$ac_delim
-CPP!$CPP$ac_delim
-subdirs!$subdirs$ac_delim
-ENABLE_POLLY!$ENABLE_POLLY$ac_delim
-LLVM_HAS_POLLY!$LLVM_HAS_POLLY$ac_delim
-build!$build$ac_delim
-build_cpu!$build_cpu$ac_delim
-build_vendor!$build_vendor$ac_delim
-build_os!$build_os$ac_delim
-host!$host$ac_delim
-host_cpu!$host_cpu$ac_delim
-host_vendor!$host_vendor$ac_delim
-host_os!$host_os$ac_delim
-target!$target$ac_delim
-target_cpu!$target_cpu$ac_delim
-target_vendor!$target_vendor$ac_delim
-target_os!$target_os$ac_delim
-OS!$OS$ac_delim
-HOST_OS!$HOST_OS$ac_delim
-TARGET_OS!$TARGET_OS$ac_delim
-LINKALL!$LINKALL$ac_delim
-NOLINKALL!$NOLINKALL$ac_delim
-LLVM_ON_UNIX!$LLVM_ON_UNIX$ac_delim
-LLVM_ON_WIN32!$LLVM_ON_WIN32$ac_delim
-ARCH!$ARCH$ac_delim
-HOST_ARCH!$HOST_ARCH$ac_delim
-ENDIAN!$ENDIAN$ac_delim
-GREP!$GREP$ac_delim
-EGREP!$EGREP$ac_delim
-LLVM_CROSS_COMPILING!$LLVM_CROSS_COMPILING$ac_delim
-BUILD_CC!$BUILD_CC$ac_delim
-BUILD_EXEEXT!$BUILD_EXEEXT$ac_delim
-BUILD_CXX!$BUILD_CXX$ac_delim
-CVSBUILD!$CVSBUILD$ac_delim
-ENABLE_LIBCPP!$ENABLE_LIBCPP$ac_delim
-ENABLE_CXX11!$ENABLE_CXX11$ac_delim
-ENABLE_CLANG_ARCMT!$ENABLE_CLANG_ARCMT$ac_delim
-ENABLE_CLANG_STATIC_ANALYZER!$ENABLE_CLANG_STATIC_ANALYZER$ac_delim
-ENABLE_CLANG_REWRITER!$ENABLE_CLANG_REWRITER$ac_delim
-ENABLE_OPTIMIZED!$ENABLE_OPTIMIZED$ac_delim
-ENABLE_PROFILING!$ENABLE_PROFILING$ac_delim
-DISABLE_ASSERTIONS!$DISABLE_ASSERTIONS$ac_delim
-ENABLE_WERROR!$ENABLE_WERROR$ac_delim
-ENABLE_EXPENSIVE_CHECKS!$ENABLE_EXPENSIVE_CHECKS$ac_delim
-EXPENSIVE_CHECKS!$EXPENSIVE_CHECKS$ac_delim
-DEBUG_RUNTIME!$DEBUG_RUNTIME$ac_delim
-DEBUG_SYMBOLS!$DEBUG_SYMBOLS$ac_delim
-KEEP_SYMBOLS!$KEEP_SYMBOLS$ac_delim
-JIT!$JIT$ac_delim
-TARGET_HAS_JIT!$TARGET_HAS_JIT$ac_delim
-_ACEOF
-
- if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 97; then
- break
- elif $ac_last_try; then
- { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
-echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
- { (exit 1); exit 1; }; }
- else
- ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
- fi
-done
-
-ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed`
-if test -n "$ac_eof"; then
- ac_eof=`echo "$ac_eof" | sort -nru | sed 1q`
- ac_eof=`expr $ac_eof + 1`
-fi
-
-cat >>$CONFIG_STATUS <<_ACEOF
-cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof
-/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-_ACEOF
-sed '
-s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g
-s/^/s,@/; s/!/@,|#_!!_#|/
-:n
-t n
-s/'"$ac_delim"'$/,g/; t
-s/$/\\/; p
-N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n
-' >>$CONFIG_STATUS <conf$$subs.sed
-rm -f conf$$subs.sed
-cat >>$CONFIG_STATUS <<_ACEOF
-CEOF$ac_eof
-_ACEOF
-
-
-ac_delim='%!_!# '
-for ac_last_try in false false false false false :; do
- cat >conf$$subs.sed <<_ACEOF
-ENABLE_DOCS!$ENABLE_DOCS$ac_delim
-ENABLE_DOXYGEN!$ENABLE_DOXYGEN$ac_delim
-LLVM_ENABLE_THREADS!$LLVM_ENABLE_THREADS$ac_delim
-ENABLE_PTHREADS!$ENABLE_PTHREADS$ac_delim
-LLVM_ENABLE_ZLIB!$LLVM_ENABLE_ZLIB$ac_delim
-ENABLE_PIC!$ENABLE_PIC$ac_delim
-ENABLE_SHARED!$ENABLE_SHARED$ac_delim
-ENABLE_EMBED_STDCXX!$ENABLE_EMBED_STDCXX$ac_delim
-ENABLE_TIMESTAMPS!$ENABLE_TIMESTAMPS$ac_delim
-ENABLE_BACKTRACES!$ENABLE_BACKTRACES$ac_delim
-TARGETS_TO_BUILD!$TARGETS_TO_BUILD$ac_delim
-LLVM_ENUM_TARGETS!$LLVM_ENUM_TARGETS$ac_delim
-LLVM_ENUM_ASM_PRINTERS!$LLVM_ENUM_ASM_PRINTERS$ac_delim
-LLVM_ENUM_ASM_PARSERS!$LLVM_ENUM_ASM_PARSERS$ac_delim
-LLVM_ENUM_DISASSEMBLERS!$LLVM_ENUM_DISASSEMBLERS$ac_delim
-OPTIMIZE_OPTION!$OPTIMIZE_OPTION$ac_delim
-EXTRA_OPTIONS!$EXTRA_OPTIONS$ac_delim
-EXTRA_LD_OPTIONS!$EXTRA_LD_OPTIONS$ac_delim
-CLANG_SRC_ROOT!$CLANG_SRC_ROOT$ac_delim
-BINUTILS_INCDIR!$BINUTILS_INCDIR$ac_delim
-INTERNAL_PREFIX!$INTERNAL_PREFIX$ac_delim
-NM!$NM$ac_delim
-ifGNUmake!$ifGNUmake$ac_delim
-LN_S!$LN_S$ac_delim
-CMP!$CMP$ac_delim
-CP!$CP$ac_delim
-DATE!$DATE$ac_delim
-FIND!$FIND$ac_delim
-MKDIR!$MKDIR$ac_delim
-MV!$MV$ac_delim
-RANLIB!$RANLIB$ac_delim
-AR!$AR$ac_delim
-RM!$RM$ac_delim
-SED!$SED$ac_delim
-TAR!$TAR$ac_delim
-BINPWD!$BINPWD$ac_delim
-GRAPHVIZ!$GRAPHVIZ$ac_delim
-DOT!$DOT$ac_delim
-FDP!$FDP$ac_delim
-NEATO!$NEATO$ac_delim
-TWOPI!$TWOPI$ac_delim
-CIRCO!$CIRCO$ac_delim
-GV!$GV$ac_delim
-DOTTY!$DOTTY$ac_delim
-XDOT_PY!$XDOT_PY$ac_delim
-INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim
-INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim
-INSTALL_DATA!$INSTALL_DATA$ac_delim
-BZIP2!$BZIP2$ac_delim
-CAT!$CAT$ac_delim
-DOXYGEN!$DOXYGEN$ac_delim
-GROFF!$GROFF$ac_delim
-GZIPBIN!$GZIPBIN$ac_delim
-PDFROFF!$PDFROFF$ac_delim
-ZIP!$ZIP$ac_delim
-OCAMLC!$OCAMLC$ac_delim
-OCAMLOPT!$OCAMLOPT$ac_delim
-OCAMLDEP!$OCAMLDEP$ac_delim
-OCAMLDOC!$OCAMLDOC$ac_delim
-GAS!$GAS$ac_delim
-HAVE_LINK_VERSION_SCRIPT!$HAVE_LINK_VERSION_SCRIPT$ac_delim
-INSTALL_LTDL_TRUE!$INSTALL_LTDL_TRUE$ac_delim
-INSTALL_LTDL_FALSE!$INSTALL_LTDL_FALSE$ac_delim
-CONVENIENCE_LTDL_TRUE!$CONVENIENCE_LTDL_TRUE$ac_delim
-CONVENIENCE_LTDL_FALSE!$CONVENIENCE_LTDL_FALSE$ac_delim
-LIBADD_DL!$LIBADD_DL$ac_delim
-NO_VARIADIC_MACROS!$NO_VARIADIC_MACROS$ac_delim
-NO_MISSING_FIELD_INITIALIZERS!$NO_MISSING_FIELD_INITIALIZERS$ac_delim
-COVERED_SWITCH_DEFAULT!$COVERED_SWITCH_DEFAULT$ac_delim
-NO_MAYBE_UNINITIALIZED!$NO_MAYBE_UNINITIALIZED$ac_delim
-NO_UNINITIALIZED!$NO_UNINITIALIZED$ac_delim
-PYTHON!$PYTHON$ac_delim
-USE_UDIS86!$USE_UDIS86$ac_delim
-USE_OPROFILE!$USE_OPROFILE$ac_delim
-USE_INTEL_JITEVENTS!$USE_INTEL_JITEVENTS$ac_delim
-XML2CONFIG!$XML2CONFIG$ac_delim
-LIBXML2_LIBS!$LIBXML2_LIBS$ac_delim
-LIBXML2_INC!$LIBXML2_INC$ac_delim
-CXXCPP!$CXXCPP$ac_delim
-HAVE_PTHREAD!$HAVE_PTHREAD$ac_delim
-HAVE_LIBZ!$HAVE_LIBZ$ac_delim
-HUGE_VAL_SANITY!$HUGE_VAL_SANITY$ac_delim
-MMAP_FILE!$MMAP_FILE$ac_delim
-SHLIBEXT!$SHLIBEXT$ac_delim
-SHLIBPATH_VAR!$SHLIBPATH_VAR$ac_delim
-LLVM_PREFIX!$LLVM_PREFIX$ac_delim
-LLVM_BINDIR!$LLVM_BINDIR$ac_delim
-LLVM_LIBDIR!$LLVM_LIBDIR$ac_delim
-LLVM_DATADIR!$LLVM_DATADIR$ac_delim
-LLVM_DOCSDIR!$LLVM_DOCSDIR$ac_delim
-LLVM_ETCDIR!$LLVM_ETCDIR$ac_delim
-LLVM_INCLUDEDIR!$LLVM_INCLUDEDIR$ac_delim
-LLVM_INFODIR!$LLVM_INFODIR$ac_delim
-LLVM_MANDIR!$LLVM_MANDIR$ac_delim
-LLVM_CONFIGTIME!$LLVM_CONFIGTIME$ac_delim
-BINDINGS_TO_BUILD!$BINDINGS_TO_BUILD$ac_delim
-ALL_BINDINGS!$ALL_BINDINGS$ac_delim
-_ACEOF
-
- if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 97; then
- break
- elif $ac_last_try; then
- { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
-echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
- { (exit 1); exit 1; }; }
- else
- ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
- fi
-done
-
-ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed`
-if test -n "$ac_eof"; then
- ac_eof=`echo "$ac_eof" | sort -nru | sed 1q`
- ac_eof=`expr $ac_eof + 1`
-fi
-
-cat >>$CONFIG_STATUS <<_ACEOF
-cat >"\$tmp/subs-2.sed" <<\CEOF$ac_eof
-/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-_ACEOF
-sed '
-s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g
-s/^/s,@/; s/!/@,|#_!!_#|/
-:n
-t n
-s/'"$ac_delim"'$/,g/; t
-s/$/\\/; p
-N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n
-' >>$CONFIG_STATUS <conf$$subs.sed
-rm -f conf$$subs.sed
-cat >>$CONFIG_STATUS <<_ACEOF
-CEOF$ac_eof
-_ACEOF
-
-
-ac_delim='%!_!# '
-for ac_last_try in false false false false false :; do
- cat >conf$$subs.sed <<_ACEOF
-OCAML_LIBDIR!$OCAML_LIBDIR$ac_delim
-ENABLE_VISIBILITY_INLINES_HIDDEN!$ENABLE_VISIBILITY_INLINES_HIDDEN$ac_delim
-RPATH!$RPATH$ac_delim
-RDYNAMIC!$RDYNAMIC$ac_delim
-program_prefix!$program_prefix$ac_delim
-LIBOBJS!$LIBOBJS$ac_delim
-LTLIBOBJS!$LTLIBOBJS$ac_delim
-_ACEOF
-
- if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 7; then
- break
- elif $ac_last_try; then
- { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
-echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
- { (exit 1); exit 1; }; }
- else
- ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
- fi
-done
-
-ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed`
-if test -n "$ac_eof"; then
- ac_eof=`echo "$ac_eof" | sort -nru | sed 1q`
- ac_eof=`expr $ac_eof + 1`
-fi
-
-cat >>$CONFIG_STATUS <<_ACEOF
-cat >"\$tmp/subs-3.sed" <<\CEOF$ac_eof
-/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end
-_ACEOF
-sed '
-s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g
-s/^/s,@/; s/!/@,|#_!!_#|/
-:n
-t n
-s/'"$ac_delim"'$/,g/; t
-s/$/\\/; p
-N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n
-' >>$CONFIG_STATUS <conf$$subs.sed
-rm -f conf$$subs.sed
-cat >>$CONFIG_STATUS <<_ACEOF
-:end
-s/|#_!!_#|//g
-CEOF$ac_eof
-_ACEOF
-
-
-# VPATH may cause trouble with some makes, so we remove $(srcdir),
-# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
-# trailing colons and then remove the whole line if VPATH becomes empty
-# (actually we leave an empty line to preserve line numbers).
-if test "x$srcdir" = x.; then
- ac_vpsub='/^[ ]*VPATH[ ]*=/{
-s/:*\$(srcdir):*/:/
-s/:*\${srcdir}:*/:/
-s/:*@srcdir@:*/:/
-s/^\([^=]*=[ ]*\):*/\1/
-s/:*$//
-s/^[^=]*=[ ]*$//
-}'
-fi
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-fi # test -n "$CONFIG_FILES"
-
-
-for ac_tag in :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS
-do
- case $ac_tag in
- :[FHLC]) ac_mode=$ac_tag; continue;;
- esac
- case $ac_mode$ac_tag in
- :[FHL]*:*);;
- :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5
-echo "$as_me: error: Invalid tag $ac_tag." >&2;}
- { (exit 1); exit 1; }; };;
- :[FH]-) ac_tag=-:-;;
- :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
- esac
- ac_save_IFS=$IFS
- IFS=:
- set x $ac_tag
- IFS=$ac_save_IFS
- shift
- ac_file=$1
- shift
-
- case $ac_mode in
- :L) ac_source=$1;;
- :[FH])
- ac_file_inputs=
- for ac_f
- do
- case $ac_f in
- -) ac_f="$tmp/stdin";;
- *) # Look for the file first in the build tree, then in the source tree
- # (if the path is not absolute). The absolute path cannot be DOS-style,
- # because $ac_f cannot contain `:'.
- test -f "$ac_f" ||
- case $ac_f in
- [\\/$]*) false;;
- *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
- esac ||
- { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5
-echo "$as_me: error: cannot find input file: $ac_f" >&2;}
- { (exit 1); exit 1; }; };;
- esac
- ac_file_inputs="$ac_file_inputs $ac_f"
- done
-
- # Let's still pretend it is `configure' which instantiates (i.e., don't
- # use $as_me), people would be surprised to read:
- # /* config.h. Generated by config.status. */
- configure_input="Generated from "`IFS=:
- echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure."
- if test x"$ac_file" != x-; then
- configure_input="$ac_file. $configure_input"
- { echo "$as_me:$LINENO: creating $ac_file" >&5
-echo "$as_me: creating $ac_file" >&6;}
- fi
-
- case $ac_tag in
- *:-:* | *:-) cat >"$tmp/stdin";;
- esac
- ;;
- esac
-
- ac_dir=`$as_dirname -- "$ac_file" ||
-$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$ac_file" : 'X\(//\)[^/]' \| \
- X"$ac_file" : 'X\(//\)$' \| \
- X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
-echo X"$ac_file" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- { as_dir="$ac_dir"
- case $as_dir in #(
- -*) as_dir=./$as_dir;;
- esac
- test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
- as_dirs=
- while :; do
- case $as_dir in #(
- *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
- *) as_qdir=$as_dir;;
- esac
- as_dirs="'$as_qdir' $as_dirs"
- as_dir=`$as_dirname -- "$as_dir" ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_dir" : 'X\(//\)[^/]' \| \
- X"$as_dir" : 'X\(//\)$' \| \
- X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-echo X"$as_dir" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- test -d "$as_dir" && break
- done
- test -z "$as_dirs" || eval "mkdir $as_dirs"
- } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
-echo "$as_me: error: cannot create directory $as_dir" >&2;}
- { (exit 1); exit 1; }; }; }
- ac_builddir=.
-
-case "$ac_dir" in
-.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
-*)
- ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
- # A ".." for each directory in $ac_dir_suffix.
- ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
- case $ac_top_builddir_sub in
- "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
- *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
- esac ;;
-esac
-ac_abs_top_builddir=$ac_pwd
-ac_abs_builddir=$ac_pwd$ac_dir_suffix
-# for backward compatibility:
-ac_top_builddir=$ac_top_build_prefix
-
-case $srcdir in
- .) # We are building in place.
- ac_srcdir=.
- ac_top_srcdir=$ac_top_builddir_sub
- ac_abs_top_srcdir=$ac_pwd ;;
- [\\/]* | ?:[\\/]* ) # Absolute name.
- ac_srcdir=$srcdir$ac_dir_suffix;
- ac_top_srcdir=$srcdir
- ac_abs_top_srcdir=$srcdir ;;
- *) # Relative name.
- ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
- ac_top_srcdir=$ac_top_build_prefix$srcdir
- ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
-esac
-ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
-
-
- case $ac_mode in
- :F)
- #
- # CONFIG_FILE
- #
-
- case $INSTALL in
- [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
- *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
- esac
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-# If the template does not know about datarootdir, expand it.
-# FIXME: This hack should be removed a few years after 2.60.
-ac_datarootdir_hack=; ac_datarootdir_seen=
-
-case `sed -n '/datarootdir/ {
- p
- q
-}
-/@datadir@/p
-/@docdir@/p
-/@infodir@/p
-/@localedir@/p
-/@mandir@/p
-' $ac_file_inputs` in
-*datarootdir*) ac_datarootdir_seen=yes;;
-*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
- { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
-echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
- ac_datarootdir_hack='
- s&@datadir@&$datadir&g
- s&@docdir@&$docdir&g
- s&@infodir@&$infodir&g
- s&@localedir@&$localedir&g
- s&@mandir@&$mandir&g
- s&\\\${datarootdir}&$datarootdir&g' ;;
-esac
-_ACEOF
-
-# Neutralize VPATH when `$srcdir' = `.'.
-# Shell code in configure.ac might set extrasub.
-# FIXME: do we really want to maintain this feature?
-cat >>$CONFIG_STATUS <<_ACEOF
- sed "$ac_vpsub
-$extrasub
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
-:t
-/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-s&@configure_input@&$configure_input&;t t
-s&@top_builddir@&$ac_top_builddir_sub&;t t
-s&@srcdir@&$ac_srcdir&;t t
-s&@abs_srcdir@&$ac_abs_srcdir&;t t
-s&@top_srcdir@&$ac_top_srcdir&;t t
-s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
-s&@builddir@&$ac_builddir&;t t
-s&@abs_builddir@&$ac_abs_builddir&;t t
-s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
-s&@INSTALL@&$ac_INSTALL&;t t
-$ac_datarootdir_hack
-" $ac_file_inputs | sed -f "$tmp/subs-1.sed" | sed -f "$tmp/subs-2.sed" | sed -f "$tmp/subs-3.sed" >$tmp/out
-
-test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
- { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
- { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
- { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-which seems to be undefined. Please make sure it is defined." >&5
-echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-which seems to be undefined. Please make sure it is defined." >&2;}
-
- rm -f "$tmp/stdin"
- case $ac_file in
- -) cat "$tmp/out"; rm -f "$tmp/out";;
- *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;;
- esac
- ;;
- :H)
- #
- # CONFIG_HEADER
- #
-_ACEOF
-
-# Transform confdefs.h into a sed script `conftest.defines', that
-# substitutes the proper values into config.h.in to produce config.h.
-rm -f conftest.defines conftest.tail
-# First, append a space to every undef/define line, to ease matching.
-echo 's/$/ /' >conftest.defines
-# Then, protect against being on the right side of a sed subst, or in
-# an unquoted here document, in config.status. If some macros were
-# called several times there might be several #defines for the same
-# symbol, which is useless. But do not sort them, since the last
-# AC_DEFINE must be honored.
-ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]*
-# These sed commands are passed to sed as "A NAME B PARAMS C VALUE D", where
-# NAME is the cpp macro being defined, VALUE is the value it is being given.
-# PARAMS is the parameter list in the macro definition--in most cases, it's
-# just an empty string.
-ac_dA='s,^\\([ #]*\\)[^ ]*\\([ ]*'
-ac_dB='\\)[ (].*,\\1define\\2'
-ac_dC=' '
-ac_dD=' ,'
-
-uniq confdefs.h |
- sed -n '
- t rset
- :rset
- s/^[ ]*#[ ]*define[ ][ ]*//
- t ok
- d
- :ok
- s/[\\&,]/\\&/g
- s/^\('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/ '"$ac_dA"'\1'"$ac_dB"'\2'"${ac_dC}"'\3'"$ac_dD"'/p
- s/^\('"$ac_word_re"'\)[ ]*\(.*\)/'"$ac_dA"'\1'"$ac_dB$ac_dC"'\2'"$ac_dD"'/p
- ' >>conftest.defines
-
-# Remove the space that was appended to ease matching.
-# Then replace #undef with comments. This is necessary, for
-# example, in the case of _POSIX_SOURCE, which is predefined and required
-# on some systems where configure will not decide to define it.
-# (The regexp can be short, since the line contains either #define or #undef.)
-echo 's/ $//
-s,^[ #]*u.*,/* & */,' >>conftest.defines
-
-# Break up conftest.defines:
-ac_max_sed_lines=50
-
-# First sed command is: sed -f defines.sed $ac_file_inputs >"$tmp/out1"
-# Second one is: sed -f defines.sed "$tmp/out1" >"$tmp/out2"
-# Third one will be: sed -f defines.sed "$tmp/out2" >"$tmp/out1"
-# et cetera.
-ac_in='$ac_file_inputs'
-ac_out='"$tmp/out1"'
-ac_nxt='"$tmp/out2"'
-
-while :
-do
- # Write a here document:
- cat >>$CONFIG_STATUS <<_ACEOF
- # First, check the format of the line:
- cat >"\$tmp/defines.sed" <<\\CEOF
-/^[ ]*#[ ]*undef[ ][ ]*$ac_word_re[ ]*\$/b def
-/^[ ]*#[ ]*define[ ][ ]*$ac_word_re[( ]/b def
-b
-:def
-_ACEOF
- sed ${ac_max_sed_lines}q conftest.defines >>$CONFIG_STATUS
- echo 'CEOF
- sed -f "$tmp/defines.sed"' "$ac_in >$ac_out" >>$CONFIG_STATUS
- ac_in=$ac_out; ac_out=$ac_nxt; ac_nxt=$ac_in
- sed 1,${ac_max_sed_lines}d conftest.defines >conftest.tail
- grep . conftest.tail >/dev/null || break
- rm -f conftest.defines
- mv conftest.tail conftest.defines
-done
-rm -f conftest.defines conftest.tail
-
-echo "ac_result=$ac_in" >>$CONFIG_STATUS
-cat >>$CONFIG_STATUS <<\_ACEOF
- if test x"$ac_file" != x-; then
- echo "/* $configure_input */" >"$tmp/config.h"
- cat "$ac_result" >>"$tmp/config.h"
- if diff $ac_file "$tmp/config.h" >/dev/null 2>&1; then
- { echo "$as_me:$LINENO: $ac_file is unchanged" >&5
-echo "$as_me: $ac_file is unchanged" >&6;}
- else
- rm -f $ac_file
- mv "$tmp/config.h" $ac_file
- fi
- else
- echo "/* $configure_input */"
- cat "$ac_result"
- fi
- rm -f "$tmp/out12"
- ;;
-
- :C) { echo "$as_me:$LINENO: executing $ac_file commands" >&5
-echo "$as_me: executing $ac_file commands" >&6;}
- ;;
- esac
-
-
- case $ac_file$ac_mode in
- "Makefile":C) ${llvm_src}/autoconf/mkinstalldirs `dirname Makefile`
- ${SHELL} ${llvm_src}/autoconf/install-sh -m 0644 -c ${srcdir}/Makefile Makefile ;;
- "Makefile.common":C) ${llvm_src}/autoconf/mkinstalldirs `dirname Makefile.common`
- ${SHELL} ${llvm_src}/autoconf/install-sh -m 0644 -c ${srcdir}/Makefile.common Makefile.common ;;
- "examples/Makefile":C) ${llvm_src}/autoconf/mkinstalldirs `dirname examples/Makefile`
- ${SHELL} ${llvm_src}/autoconf/install-sh -m 0644 -c ${srcdir}/examples/Makefile examples/Makefile ;;
- "lib/Makefile":C) ${llvm_src}/autoconf/mkinstalldirs `dirname lib/Makefile`
- ${SHELL} ${llvm_src}/autoconf/install-sh -m 0644 -c ${srcdir}/lib/Makefile lib/Makefile ;;
- "runtime/Makefile":C) ${llvm_src}/autoconf/mkinstalldirs `dirname runtime/Makefile`
- ${SHELL} ${llvm_src}/autoconf/install-sh -m 0644 -c ${srcdir}/runtime/Makefile runtime/Makefile ;;
- "test/Makefile":C) ${llvm_src}/autoconf/mkinstalldirs `dirname test/Makefile`
- ${SHELL} ${llvm_src}/autoconf/install-sh -m 0644 -c ${srcdir}/test/Makefile test/Makefile ;;
- "test/Makefile.tests":C) ${llvm_src}/autoconf/mkinstalldirs `dirname test/Makefile.tests`
- ${SHELL} ${llvm_src}/autoconf/install-sh -m 0644 -c ${srcdir}/test/Makefile.tests test/Makefile.tests ;;
- "unittests/Makefile":C) ${llvm_src}/autoconf/mkinstalldirs `dirname unittests/Makefile`
- ${SHELL} ${llvm_src}/autoconf/install-sh -m 0644 -c ${srcdir}/unittests/Makefile unittests/Makefile ;;
- "tools/Makefile":C) ${llvm_src}/autoconf/mkinstalldirs `dirname tools/Makefile`
- ${SHELL} ${llvm_src}/autoconf/install-sh -m 0644 -c ${srcdir}/tools/Makefile tools/Makefile ;;
- "utils/Makefile":C) ${llvm_src}/autoconf/mkinstalldirs `dirname utils/Makefile`
- ${SHELL} ${llvm_src}/autoconf/install-sh -m 0644 -c ${srcdir}/utils/Makefile utils/Makefile ;;
- "projects/Makefile":C) ${llvm_src}/autoconf/mkinstalldirs `dirname projects/Makefile`
- ${SHELL} ${llvm_src}/autoconf/install-sh -m 0644 -c ${srcdir}/projects/Makefile projects/Makefile ;;
- "bindings/Makefile":C) ${llvm_src}/autoconf/mkinstalldirs `dirname bindings/Makefile`
- ${SHELL} ${llvm_src}/autoconf/install-sh -m 0644 -c ${srcdir}/bindings/Makefile bindings/Makefile ;;
- "bindings/ocaml/Makefile.ocaml":C) ${llvm_src}/autoconf/mkinstalldirs `dirname bindings/ocaml/Makefile.ocaml`
- ${SHELL} ${llvm_src}/autoconf/install-sh -m 0644 -c ${srcdir}/bindings/ocaml/Makefile.ocaml bindings/ocaml/Makefile.ocaml ;;
-
- esac
-done # for ac_tag
-
-
-{ (exit 0); exit 0; }
-_ACEOF
-chmod +x $CONFIG_STATUS
-ac_clean_files=$ac_clean_files_save
-
-
-# configure is writing to config.log, and then calls config.status.
-# config.status does its own redirection, appending to config.log.
-# Unfortunately, on DOS this fails, as config.log is still kept open
-# by configure, so config.status won't be able to write to it; its
-# output is simply discarded. So we exec the FD to /dev/null,
-# effectively closing config.log, so it can be properly (re)opened and
-# appended to by config.status. When coming back to configure, we
-# need to make the FD available again.
-if test "$no_create" != yes; then
- ac_cs_success=:
- ac_config_status_args=
- test "$silent" = yes &&
- ac_config_status_args="$ac_config_status_args --quiet"
- exec 5>/dev/null
- $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
- exec 5>>config.log
- # Use ||, not &&, to avoid exiting from the if with $? = 1, which
- # would make configure fail if this is the last instruction.
- $ac_cs_success || { (exit 1); exit 1; }
-fi
-
-#
-# CONFIG_SUBDIRS section.
-#
-if test "$no_recursion" != yes; then
-
- # Remove --cache-file and --srcdir arguments so they do not pile up.
- ac_sub_configure_args=
- ac_prev=
- eval "set x $ac_configure_args"
- shift
- for ac_arg
- do
- if test -n "$ac_prev"; then
- ac_prev=
- continue
- fi
- case $ac_arg in
- -cache-file | --cache-file | --cache-fil | --cache-fi \
- | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
- ac_prev=cache_file ;;
- -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
- | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* \
- | --c=*)
- ;;
- --config-cache | -C)
- ;;
- -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
- ac_prev=srcdir ;;
- -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
- ;;
- -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
- ac_prev=prefix ;;
- -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
- ;;
- *)
- case $ac_arg in
- *\'*) ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
- esac
- ac_sub_configure_args="$ac_sub_configure_args '$ac_arg'" ;;
- esac
- done
-
- # Always prepend --prefix to ensure using the same prefix
- # in subdir configurations.
- ac_arg="--prefix=$prefix"
- case $ac_arg in
- *\'*) ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
- esac
- ac_sub_configure_args="$ac_arg $ac_sub_configure_args"
-
- ac_popdir=`pwd`
- for ac_dir in : $subdirs; do test "x$ac_dir" = x: && continue
-
- # Do not complain, so a configure script can configure whichever
- # parts of a large source tree are present.
- test -d "$srcdir/$ac_dir" || continue
-
- ac_msg="=== configuring in $ac_dir (`pwd`/$ac_dir)"
- echo "$as_me:$LINENO: $ac_msg" >&5
- echo "$ac_msg" >&6
- { as_dir="$ac_dir"
- case $as_dir in #(
- -*) as_dir=./$as_dir;;
- esac
- test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
- as_dirs=
- while :; do
- case $as_dir in #(
- *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
- *) as_qdir=$as_dir;;
- esac
- as_dirs="'$as_qdir' $as_dirs"
- as_dir=`$as_dirname -- "$as_dir" ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_dir" : 'X\(//\)[^/]' \| \
- X"$as_dir" : 'X\(//\)$' \| \
- X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-echo X"$as_dir" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- test -d "$as_dir" && break
- done
- test -z "$as_dirs" || eval "mkdir $as_dirs"
- } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
-echo "$as_me: error: cannot create directory $as_dir" >&2;}
- { (exit 1); exit 1; }; }; }
- ac_builddir=.
-
-case "$ac_dir" in
-.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
-*)
- ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
- # A ".." for each directory in $ac_dir_suffix.
- ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
- case $ac_top_builddir_sub in
- "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
- *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
- esac ;;
-esac
-ac_abs_top_builddir=$ac_pwd
-ac_abs_builddir=$ac_pwd$ac_dir_suffix
-# for backward compatibility:
-ac_top_builddir=$ac_top_build_prefix
-
-case $srcdir in
- .) # We are building in place.
- ac_srcdir=.
- ac_top_srcdir=$ac_top_builddir_sub
- ac_abs_top_srcdir=$ac_pwd ;;
- [\\/]* | ?:[\\/]* ) # Absolute name.
- ac_srcdir=$srcdir$ac_dir_suffix;
- ac_top_srcdir=$srcdir
- ac_abs_top_srcdir=$srcdir ;;
- *) # Relative name.
- ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
- ac_top_srcdir=$ac_top_build_prefix$srcdir
- ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
-esac
-ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
-
-
- cd "$ac_dir"
-
- # Check for guested configure; otherwise get Cygnus style configure.
- if test -f "$ac_srcdir/configure.gnu"; then
- ac_sub_configure=$ac_srcdir/configure.gnu
- elif test -f "$ac_srcdir/configure"; then
- ac_sub_configure=$ac_srcdir/configure
- elif test -f "$ac_srcdir/configure.in"; then
- # This should be Cygnus configure.
- ac_sub_configure=$ac_aux_dir/configure
- else
- { echo "$as_me:$LINENO: WARNING: no configuration information is in $ac_dir" >&5
-echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2;}
- ac_sub_configure=
- fi
-
- # The recursion is here.
- if test -n "$ac_sub_configure"; then
- # Make the cache file name correct relative to the subdirectory.
- case $cache_file in
- [\\/]* | ?:[\\/]* ) ac_sub_cache_file=$cache_file ;;
- *) # Relative name.
- ac_sub_cache_file=$ac_top_build_prefix$cache_file ;;
- esac
-
- { echo "$as_me:$LINENO: running $SHELL $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&5
-echo "$as_me: running $SHELL $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&6;}
- # The eval makes quoting arguments work.
- eval "\$SHELL \"\$ac_sub_configure\" $ac_sub_configure_args \
- --cache-file=\"\$ac_sub_cache_file\" --srcdir=\"\$ac_srcdir\"" ||
- { { echo "$as_me:$LINENO: error: $ac_sub_configure failed for $ac_dir" >&5
-echo "$as_me: error: $ac_sub_configure failed for $ac_dir" >&2;}
- { (exit 1); exit 1; }; }
- fi
-
- cd "$ac_popdir"
- done
-fi
-
Deleted: trunk/contrib/llvm/llvm.spec.in
===================================================================
--- trunk/contrib/llvm/llvm.spec.in 2015-06-21 18:59:54 UTC (rev 7065)
+++ trunk/contrib/llvm/llvm.spec.in 2015-06-21 19:01:11 UTC (rev 7066)
@@ -1,67 +0,0 @@
-Name: @PACKAGE_NAME@
-Version: @PACKAGE_VERSION@
-Release: 0
-Summary: LLVM (An Optimizing Compiler Infrastructure)
-License: University of Illinois/NCSA Open Source License
-Vendor: None (open source)
-Group: Development/Compilers
-URL: http://llvm..org/
-Source: http://llvm.org/releases/@PACKAGE_VERSION@/@PACKAGE_NAME@-@PACKAGE_VERSION@.tar.gz
-BuildRoot: %{_tmppath}/%{name}-root
-Requires: /sbin/ldconfig
-BuildRequires: gcc >= 3.4
-
-%description
-LLVM is a compiler infrastructure designed for compile-time, link-time, runtime,
-and idle-time optimization of programs from arbitrary programming languages.
-LLVM is written in C++ and has been developed since 2000 at the University of
-Illinois and Apple. It currently supports compilation of C and C++ programs,
-using front-ends derived from GCC 4.0.1. A new front-end for the C family of
-languages is in development. The compiler infrastructure
-includes mirror sets of programming tools as well as libraries with equivalent
-functionality.
-
-%prep
-%setup -q -n @PACKAGE_NAME at -@PACKAGE_VERSION@
-
-%build
-./configure \
---prefix=%{_prefix} \
---bindir=%{_bindir} \
---datadir=%{_datadir} \
---includedir=%{_includedir} \
---libdir=%{_libdir} \
---enable-optimized \
---enable-assertions
-make tools-only
-
-%install
-rm -rf %{buildroot}
-make install DESTDIR=%{buildroot}
-
-%clean
-rm -rf %{buildroot}
-
-%post -p /sbin/ldconfig
-
-%postun -p /sbin/ldconfig
-
-%files
-%defattr(-, root, root)
-%doc CREDITS.TXT LICENSE.TXT README.txt docs/*.{html,css,gif,jpg} docs/CommandGuide
-%{_bindir}/*
-%{_libdir}/*.o
-%{_libdir}/*.a
-%{_libdir}/*.so
-%{_includedir}/llvm
-
-%changelog
-* Fri Aug 04 2006 Reid Spencer
-- Updates for release 1.8
-* Fri Apr 07 2006 Reid Spencer
-- Make the build be optimized+assertions
-* Fri May 13 2005 Reid Spencer
-- Minor adjustments for the 1.5 release
-* Mon Feb 09 2003 Brian R. Gaeke
-- Initial working version of RPM spec file.
-
More information about the Midnightbsd-cvs
mailing list