[Midnightbsd-cvs] src [8505] trunk/contrib/openbsm: OpenBSM 1.2-alpha3
laffer1 at midnightbsd.org
laffer1 at midnightbsd.org
Sun Sep 18 18:45:22 EDT 2016
Revision: 8505
http://svnweb.midnightbsd.org/src/?rev=8505
Author: laffer1
Date: 2016-09-18 18:45:22 -0400 (Sun, 18 Sep 2016)
Log Message:
-----------
OpenBSM 1.2-alpha3
Modified Paths:
--------------
trunk/contrib/openbsm/CREDITS
trunk/contrib/openbsm/INSTALL
trunk/contrib/openbsm/LICENSE
trunk/contrib/openbsm/Makefile.am
trunk/contrib/openbsm/Makefile.in
trunk/contrib/openbsm/NEWS
trunk/contrib/openbsm/README
trunk/contrib/openbsm/TODO
trunk/contrib/openbsm/VERSION
trunk/contrib/openbsm/aclocal.m4
trunk/contrib/openbsm/autogen.sh
trunk/contrib/openbsm/bin/Makefile.am
trunk/contrib/openbsm/bin/Makefile.in
trunk/contrib/openbsm/bin/audit/Makefile.am
trunk/contrib/openbsm/bin/audit/Makefile.in
trunk/contrib/openbsm/bin/audit/audit.8
trunk/contrib/openbsm/bin/auditd/Makefile.am
trunk/contrib/openbsm/bin/auditd/Makefile.in
trunk/contrib/openbsm/bin/auditd/auditd.8
trunk/contrib/openbsm/bin/auditd/auditd.c
trunk/contrib/openbsm/bin/auditfilterd/Makefile.am
trunk/contrib/openbsm/bin/auditfilterd/Makefile.in
trunk/contrib/openbsm/bin/auditreduce/Makefile.am
trunk/contrib/openbsm/bin/auditreduce/Makefile.in
trunk/contrib/openbsm/bin/auditreduce/auditreduce.1
trunk/contrib/openbsm/bin/praudit/Makefile.am
trunk/contrib/openbsm/bin/praudit/Makefile.in
trunk/contrib/openbsm/bin/praudit/praudit.1
trunk/contrib/openbsm/bin/praudit/praudit.c
trunk/contrib/openbsm/bsm/Makefile.am
trunk/contrib/openbsm/bsm/Makefile.in
trunk/contrib/openbsm/bsm/auditd_lib.h
trunk/contrib/openbsm/bsm/libbsm.h
trunk/contrib/openbsm/compat/endian.h
trunk/contrib/openbsm/config/config.h
trunk/contrib/openbsm/config/config.h.in
trunk/contrib/openbsm/config/ltmain.sh
Modified: trunk/contrib/openbsm/CREDITS
===================================================================
--- trunk/contrib/openbsm/CREDITS 2016-09-18 22:43:06 UTC (rev 8504)
+++ trunk/contrib/openbsm/CREDITS 2016-09-18 22:45:22 UTC (rev 8505)
@@ -29,6 +29,12 @@
Stacey Son
Todd Heberlein
Gary Hoo
+ Dave Bertouille
+ Jonathan Anderson
+ Pawel Jakub Dawidek
+ Joel Dahl
+ Ryan Steinmetz
+ The FreeBSD Foundation
In addition, Coverity, Inc.'s Prevent(tm) static analysis tool and Gimpel
Software's FlexeLint tool were used to identify a number of bugs in the
Modified: trunk/contrib/openbsm/INSTALL
===================================================================
--- trunk/contrib/openbsm/INSTALL 2016-09-18 22:43:06 UTC (rev 8504)
+++ trunk/contrib/openbsm/INSTALL 2016-09-18 22:45:22 UTC (rev 8505)
@@ -9,11 +9,17 @@
make
If doing development work on OpenBSM with gcc, the following invocation of
-configure may be preferred in order to generate full compiler warnings and
-force the compile to fail if a warning is found:
+configure is preferred in order to generate full compiler warnings and force
+the compile to fail if a warning is found:
CFLAGS="-Wall -Werror" ./configure
+On Linux systems, OpenSSL headers may have to be installed to support
+encryption of on-the-wire audit streams using auditdistd; the following
+appears to work on Ubuntu:
+
+ sudo apt-get install libssl-dev
+
To install the library, binaries, and man pages, use:
make install
Modified: trunk/contrib/openbsm/LICENSE
===================================================================
--- trunk/contrib/openbsm/LICENSE 2016-09-18 22:43:06 UTC (rev 8504)
+++ trunk/contrib/openbsm/LICENSE 2016-09-18 22:45:22 UTC (rev 8505)
@@ -2,34 +2,37 @@
OpenBSM is covered by a number of copyrights, with licenses being either two
or three clause BSD licenses. Individual file headers should be consulted
-for specific copyrights on specific components. The TrustedBSD Project would
-appreciate the contribution of fixes and enhancements under identical or
-substantially similar licenses:
+for copyrights on specific elements of the distribution.
- * Copyright (c) <year> <copyright holder>
- * All rights reserved.
- *
- * <any additional comments or credits>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
+The following copyright and license are asserted over the OpenBSM distribution
+as a whole:
-$P4: //depot/projects/trustedbsd/openbsm/LICENSE#5 $
+ Copyright (c) 2005-2012 Robert N.M. Watson
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ SUCH DAMAGE.
+
+The TrustedBSD Project would appreciate the contribution of fixes and
+enhancements under an identical license in order to avoid potentially
+confusing license proliferation.
+
+$P4: //depot/projects/trustedbsd/openbsm/LICENSE#6 $
Modified: trunk/contrib/openbsm/Makefile.am
===================================================================
--- trunk/contrib/openbsm/Makefile.am 2016-09-18 22:43:06 UTC (rev 8504)
+++ trunk/contrib/openbsm/Makefile.am 2016-09-18 22:45:22 UTC (rev 8505)
@@ -1,6 +1,6 @@
-#
-# $P4: //depot/projects/trustedbsd/openbsm/Makefile.am#4 $
-#
+##
+## $P4: //depot/projects/trustedbsd/openbsm/Makefile.am#5 $
+##
SUBDIRS = \
bsm
@@ -17,6 +17,7 @@
modules \
sys
+ACLOCAL_AMFLAGS = -I m4
EXTRA_DIST = \
CHANGELOG \
Modified: trunk/contrib/openbsm/Makefile.in
===================================================================
--- trunk/contrib/openbsm/Makefile.in 2016-09-18 22:43:06 UTC (rev 8504)
+++ trunk/contrib/openbsm/Makefile.in 2016-09-18 22:45:22 UTC (rev 8505)
@@ -1,8 +1,8 @@
-# Makefile.in generated by automake 1.10.1 from Makefile.am.
+# Makefile.in generated by automake 1.12.2 from Makefile.am.
# @configure_input@
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+# Copyright (C) 1994-2012 Free Software Foundation, Inc.
+
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@@ -13,14 +13,28 @@
# PARTICULAR PURPOSE.
@SET_MAKE@
-
-#
-# $P4: //depot/projects/trustedbsd/openbsm/Makefile.in#10 $
-#
VPATH = @srcdir@
+am__make_dryrun = \
+ { \
+ am__dry=no; \
+ case $$MAKEFLAGS in \
+ *\\[\ \ ]*) \
+ echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
+ | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+ *) \
+ for am__flg in $$MAKEFLAGS; do \
+ case $$am__flg in \
+ *=*|--*) ;; \
+ *n*) am__dry=yes; break;; \
+ esac; \
+ done;; \
+ esac; \
+ test $$am__dry = yes; \
+ }
pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
@@ -40,10 +54,14 @@
subdir = .
DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
- $(srcdir)/Makefile.in $(top_srcdir)/config/config.h.in \
- $(top_srcdir)/configure INSTALL NEWS TODO config/config.guess \
- config/config.sub config/depcomp config/install-sh \
- config/ltmain.sh config/missing
+ $(srcdir)/Makefile.in $(top_srcdir)/config/config.guess \
+ $(top_srcdir)/config/config.h.in \
+ $(top_srcdir)/config/config.sub \
+ $(top_srcdir)/config/install-sh $(top_srcdir)/config/ltmain.sh \
+ $(top_srcdir)/config/missing $(top_srcdir)/configure INSTALL \
+ NEWS TODO config/config.guess config/config.sub config/depcomp \
+ config/install-sh config/ltmain.sh config/missing \
+ config/ylwrap
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
@@ -53,6 +71,7 @@
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/config/config.h
CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
@@ -62,21 +81,61 @@
install-pdf-recursive install-ps-recursive install-recursive \
installcheck-recursive installdirs-recursive pdf-recursive \
ps-recursive uninstall-recursive
+am__can_run_installinfo = \
+ case $$AM_UPDATE_INFO_DIR in \
+ n|no|NO) false;; \
+ *) (install-info --version) >/dev/null 2>&1;; \
+ esac
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive
+AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
+ $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
+ cscope distdir dist dist-all distcheck
ETAGS = etags
CTAGS = ctags
+CSCOPE = cscope
DIST_SUBDIRS = bsm libauditd libbsm bin man modules sys
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
- { test ! -d $(distdir) \
- || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
- && rm -fr $(distdir); }; }
+ if test -d "$(distdir)"; then \
+ find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
+ && rm -rf "$(distdir)" \
+ || { sleep 5 && rm -rf "$(distdir)"; }; \
+ else :; fi
+am__post_remove_distdir = $(am__remove_distdir)
+am__relativize = \
+ dir0=`pwd`; \
+ sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+ sed_rest='s,^[^/]*/*,,'; \
+ sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+ sed_butlast='s,/*[^/]*$$,,'; \
+ while test -n "$$dir1"; do \
+ first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+ if test "$$first" != "."; then \
+ if test "$$first" = ".."; then \
+ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+ else \
+ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+ if test "$$first2" = "$$first"; then \
+ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+ else \
+ dir2="../$$dir2"; \
+ fi; \
+ dir0="$$dir0"/"$$first"; \
+ fi; \
+ fi; \
+ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+ done; \
+ reldir="$$dir2"
DIST_ARCHIVES = $(distdir).tar.gz
GZIP_ENV = --best
+DIST_TARGETS = dist-gzip
distuninstallcheck_listfiles = find . -type f -print
+am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
+ | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
distcleancheck_listfiles = find . -type f -print
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
@@ -90,22 +149,18 @@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
DSYMUTIL = @DSYMUTIL@
-ECHO = @ECHO@
+DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
-F77 = @F77@
-FFLAGS = @FFLAGS@
+FGREP = @FGREP@
GREP = @GREP@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
@@ -112,23 +167,34 @@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
LDFLAGS = @LDFLAGS@
+LEX = @LEX@
+LEXLIB = @LEXLIB@
+LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
MIG = @MIG@
MKDIR_P = @MKDIR_P@
+NM = @NM@
NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
RANLIB = @RANLIB@
@@ -137,13 +203,15 @@
SHELL = @SHELL@
STRIP = @STRIP@
VERSION = @VERSION@
+YACC = @YACC@
+YFLAGS = @YFLAGS@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
@@ -190,6 +258,7 @@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
SUBDIRS = bsm $(am__append_1) libbsm bin man modules sys
+ACLOCAL_AMFLAGS = -I m4
EXTRA_DIST = \
CHANGELOG \
LICENSE \
@@ -200,21 +269,21 @@
all: all-recursive
.SUFFIXES:
-am--refresh:
+am--refresh: Makefile
@:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
- echo ' cd $(srcdir) && $(AUTOMAKE) --foreign '; \
- cd $(srcdir) && $(AUTOMAKE) --foreign \
+ echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
+ $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
&& exit 0; \
exit 1;; \
esac; \
done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
- cd $(top_srcdir) && \
- $(AUTOMAKE) --foreign Makefile
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --foreign Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
@@ -230,21 +299,20 @@
$(SHELL) ./config.status --recheck
$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(srcdir) && $(AUTOCONF)
+ $(am__cd) $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+ $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+$(am__aclocal_m4_deps):
config/config.h: config/stamp-h1
- @if test ! -f $@; then \
- rm -f config/stamp-h1; \
- $(MAKE) $(AM_MAKEFLAGS) config/stamp-h1; \
- else :; fi
+ @if test ! -f $@; then rm -f config/stamp-h1; else :; fi
+ @if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) config/stamp-h1; else :; fi
config/stamp-h1: $(top_srcdir)/config/config.h.in $(top_builddir)/config.status
@rm -f config/stamp-h1
cd $(top_builddir) && $(SHELL) ./config.status config/config.h
$(top_srcdir)/config/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_srcdir) && $(AUTOHEADER)
+ ($(am__cd) $(top_srcdir) && $(AUTOHEADER))
rm -f config/stamp-h1
touch $@
@@ -258,16 +326,16 @@
-rm -rf .libs _libs
distclean-libtool:
- -rm -f libtool
+ -rm -f libtool config.lt
# This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-# (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
-$(RECURSIVE_TARGETS):
- @failcom='exit 1'; \
+# into them and run 'make' without going through this Makefile.
+# To change the values of 'make' variables: instead of editing Makefiles,
+# (1) if the variable is set in 'config.status', edit 'config.status'
+# (which will cause the Makefiles to be regenerated when you run 'make');
+# (2) otherwise, pass the desired values on the 'make' command line.
+$(RECURSIVE_TARGETS) $(RECURSIVE_CLEAN_TARGETS):
+ @fail= failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
@@ -276,7 +344,11 @@
done; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
@@ -284,51 +356,24 @@
else \
local_target="$$target"; \
fi; \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
-
-$(RECURSIVE_CLEAN_TARGETS):
- @failcom='exit 1'; \
- for f in x $$MAKEFLAGS; do \
- case $$f in \
- *=* | --[!k]*);; \
- *k*) failcom='fail=yes';; \
- esac; \
- done; \
- dot_seen=no; \
- case "$@" in \
- distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
- *) list='$(SUBDIRS)' ;; \
- esac; \
- rev=''; for subdir in $$list; do \
- if test "$$subdir" = "."; then :; else \
- rev="$$subdir $$rev"; \
- fi; \
- done; \
- rev="$$rev ."; \
- target=`echo $@ | sed s/-recursive//`; \
- for subdir in $$rev; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || eval $$failcom; \
- done && test -z "$$fail"
tags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
done
ctags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
done
+cscopelist-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) cscopelist); \
+ done
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
@@ -335,7 +380,7 @@
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
- $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
mkid -fID $$unique
tags: TAGS
@@ -342,7 +387,7 @@
TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
- tags=; \
+ set x; \
here=`pwd`; \
if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
include_option=--etags-include; \
@@ -354,7 +399,7 @@
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test ! -f $$subdir/TAGS || \
- tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
fi; \
done; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
@@ -363,15 +408,20 @@
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ shift; \
+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$tags $$unique; \
+ if test $$# -gt 0; then \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ "$$@" $$unique; \
+ else \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$unique; \
+ fi; \
fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
- tags=; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
@@ -378,21 +428,45 @@
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
- test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$tags $$unique
+ $$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
- && cd $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) $$here
+ && $(am__cd) $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) "$$here"
+cscope: cscope.files
+ test ! -s cscope.files \
+ || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
+
+clean-cscope:
+ -rm -f cscope.files
+
+cscope.files: clean-cscope cscopelist-recursive cscopelist
+
+cscopelist: cscopelist-recursive $(HEADERS) $(SOURCES) $(LISP)
+ list='$(SOURCES) $(HEADERS) $(LISP)'; \
+ case "$(srcdir)" in \
+ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+ *) sdir=$(subdir)/$(srcdir) ;; \
+ esac; \
+ for i in $$list; do \
+ if test -f "$$i"; then \
+ echo "$(subdir)/$$i"; \
+ else \
+ echo "$$sdir/$$i"; \
+ fi; \
+ done >> $(top_builddir)/cscope.files
+
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+ -rm -f cscope.out cscope.in.out cscope.po.out cscope.files
distdir: $(DISTFILES)
$(am__remove_distdir)
- test -d $(distdir) || mkdir $(distdir)
+ test -d "$(distdir)" || mkdir "$(distdir)"
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
@@ -408,66 +482,84 @@
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
- list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
- test -d "$(distdir)/$$subdir" \
- || $(MKDIR_P) "$(distdir)/$$subdir" \
- || exit 1; \
- distdir=`$(am__cd) $(distdir) && pwd`; \
- top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
- (cd $$subdir && \
+ $(am__make_dryrun) \
+ || test -d "$(distdir)/$$subdir" \
+ || $(MKDIR_P) "$(distdir)/$$subdir" \
+ || exit 1; \
+ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+ $(am__relativize); \
+ new_distdir=$$reldir; \
+ dir1=$$subdir; dir2="$(top_distdir)"; \
+ $(am__relativize); \
+ new_top_distdir=$$reldir; \
+ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+ ($(am__cd) $$subdir && \
$(MAKE) $(AM_MAKEFLAGS) \
- top_distdir="$$top_distdir" \
- distdir="$$distdir/$$subdir" \
+ top_distdir="$$new_top_distdir" \
+ distdir="$$new_distdir" \
am__remove_distdir=: \
am__skip_length_check=: \
+ am__skip_mode_fix=: \
distdir) \
|| exit 1; \
fi; \
done
- -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
+ -test -n "$(am__skip_mode_fix)" \
+ || find "$(distdir)" -type d ! -perm -755 \
+ -exec chmod u+rwx,go+rx {} \; -o \
! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
! -type d ! -perm -400 -exec chmod a+r {} \; -o \
! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
- || chmod -R a+r $(distdir)
+ || chmod -R a+r "$(distdir)"
dist-gzip: distdir
tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
- $(am__remove_distdir)
+ $(am__post_remove_distdir)
dist-bzip2: distdir
- tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
- $(am__remove_distdir)
+ tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
+ $(am__post_remove_distdir)
-dist-lzma: distdir
- tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
- $(am__remove_distdir)
+dist-lzip: distdir
+ tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
+ $(am__post_remove_distdir)
+dist-xz: distdir
+ tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
+ $(am__post_remove_distdir)
+
dist-tarZ: distdir
tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
- $(am__remove_distdir)
+ $(am__post_remove_distdir)
dist-shar: distdir
shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
- $(am__remove_distdir)
+ $(am__post_remove_distdir)
dist-zip: distdir
-rm -f $(distdir).zip
zip -rq $(distdir).zip $(distdir)
- $(am__remove_distdir)
+ $(am__post_remove_distdir)
-dist dist-all: distdir
- tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
- $(am__remove_distdir)
+dist dist-all:
+ $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
+ $(am__post_remove_distdir)
# This target untars the dist file and tries a VPATH configuration. Then
# it guarantees that the distribution is self-contained by making another
@@ -475,26 +567,31 @@
distcheck: dist
case '$(DIST_ARCHIVES)' in \
*.tar.gz*) \
- GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
+ GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
*.tar.bz2*) \
- bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
- *.tar.lzma*) \
- unlzma -c $(distdir).tar.lzma | $(am__untar) ;;\
+ bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
+ *.tar.lz*) \
+ lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
+ *.tar.xz*) \
+ xz -dc $(distdir).tar.xz | $(am__untar) ;;\
*.tar.Z*) \
uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
*.shar.gz*) \
- GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
+ GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
*.zip*) \
unzip $(distdir).zip ;;\
esac
- chmod -R a-w $(distdir); chmod a+w $(distdir)
+ chmod -R a-w $(distdir); chmod u+w $(distdir)
mkdir $(distdir)/_build
mkdir $(distdir)/_inst
chmod a-w $(distdir)
+ test -d $(distdir)/_build || exit 0; \
dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
&& dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
- && cd $(distdir)/_build \
+ && am__cwd=`pwd` \
+ && $(am__cd) $(distdir)/_build \
&& ../configure --srcdir=.. --prefix="$$dc_install_base" \
+ $(AM_DISTCHECK_CONFIGURE_FLAGS) \
$(DISTCHECK_CONFIGURE_FLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) dvi \
@@ -515,14 +612,24 @@
&& rm -rf "$$dc_destdir" \
&& $(MAKE) $(AM_MAKEFLAGS) dist \
&& rm -rf $(DIST_ARCHIVES) \
- && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
- $(am__remove_distdir)
+ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
+ && cd "$$am__cwd" \
+ || exit 1
+ $(am__post_remove_distdir)
@(echo "$(distdir) archives ready for distribution: "; \
list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
distuninstallcheck:
- @cd $(distuninstallcheck_dir) \
- && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
+ @test -n '$(distuninstallcheck_dir)' || { \
+ echo 'ERROR: trying to run $@ with an empty' \
+ '$$(distuninstallcheck_dir)' >&2; \
+ exit 1; \
+ }; \
+ $(am__cd) '$(distuninstallcheck_dir)' || { \
+ echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
+ exit 1; \
+ }; \
+ test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
|| { echo "ERROR: files left after uninstall:" ; \
if test -n "$(DESTDIR)"; then \
echo " (check DESTDIR support)"; \
@@ -553,10 +660,15 @@
installcheck: installcheck-recursive
install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+ if test -z '$(STRIP)'; then \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ install; \
+ else \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+ fi
mostlyclean-generic:
clean-generic:
@@ -563,6 +675,7 @@
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@@ -583,6 +696,8 @@
html: html-recursive
+html-am:
+
info: info-recursive
info-am:
@@ -591,18 +706,28 @@
install-dvi: install-dvi-recursive
+install-dvi-am:
+
install-exec-am:
install-html: install-html-recursive
+install-html-am:
+
install-info: install-info-recursive
+install-info-am:
+
install-man:
install-pdf: install-pdf-recursive
+install-pdf-am:
+
install-ps: install-ps-recursive
+install-ps-am:
+
installcheck-am:
maintainer-clean: maintainer-clean-recursive
@@ -625,25 +750,28 @@
uninstall-am:
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
- install-strip
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) \
+ cscopelist-recursive ctags-recursive install-am install-strip \
+ tags-recursive
.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
- all all-am am--refresh check check-am clean clean-generic \
- clean-libtool ctags ctags-recursive dist dist-all dist-bzip2 \
- dist-gzip dist-lzma dist-shar dist-tarZ dist-zip distcheck \
- distclean distclean-generic distclean-hdr distclean-libtool \
- distclean-tags distcleancheck distdir distuninstallcheck dvi \
- dvi-am html html-am info info-am install install-am \
- install-data install-data-am install-dvi install-dvi-am \
- install-exec install-exec-am install-html install-html-am \
- install-info install-info-am install-man install-pdf \
- install-pdf-am install-ps install-ps-am install-strip \
- installcheck installcheck-am installdirs installdirs-am \
- maintainer-clean maintainer-clean-generic mostlyclean \
- mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
- tags tags-recursive uninstall uninstall-am
+ all all-am am--refresh check check-am clean clean-cscope \
+ clean-generic clean-libtool cscope cscopelist \
+ cscopelist-recursive ctags ctags-recursive dist dist-all \
+ dist-bzip2 dist-gzip dist-lzip dist-shar dist-tarZ dist-xz \
+ dist-zip distcheck distclean distclean-generic distclean-hdr \
+ distclean-libtool distclean-tags distcleancheck distdir \
+ distuninstallcheck dvi dvi-am html html-am info info-am \
+ install install-am install-data install-data-am install-dvi \
+ install-dvi-am install-exec install-exec-am install-html \
+ install-html-am install-info install-info-am install-man \
+ install-pdf install-pdf-am install-ps install-ps-am \
+ install-strip installcheck installcheck-am installdirs \
+ installdirs-am maintainer-clean maintainer-clean-generic \
+ mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
+ ps ps-am tags tags-recursive uninstall uninstall-am
+
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
Modified: trunk/contrib/openbsm/NEWS
===================================================================
--- trunk/contrib/openbsm/NEWS 2016-09-18 22:43:06 UTC (rev 8504)
+++ trunk/contrib/openbsm/NEWS 2016-09-18 22:45:22 UTC (rev 8505)
@@ -1,5 +1,36 @@
OpenBSM Version History
+OpenBSM 1.2 alpha 3
+
+- Various minor tweaks to the auditdistd build to make it fit the FreeBSD
+ build environment better.
+- AUE_WAIT6 merged from FreeBSD 9.
+
+OpenBSM 1.2 alpha 2
+
+- auditdistd, a distributed audit trail management daemon, has now been
+ merged. This allows trail files to be securely and reliably synced from
+ audited hosts to an audit server, and employs TLS encryption. Where
+ available, it uses Capsicum to sandbox the service. This work was
+ contributed by Pawel Jakub Dawidek under sponsorship from the FreeBSD
+ Foundation.
+
+OpenBSM 1.2 alpha 1
+
+- Add Capsicum-related error numbers for FreeBSD: ENOTCAPABLE, ECAPMODE.
+- Add Capsicum, process descriptor audit events for FreeBSD.
+- Allow 0% minspace.
+- Fixes from the clang static analyser.
+- Fix expiration of trail files when the host parameter is used.
+- Various typo fixes.
+- Support for Solaris privilege and privilege set tokens.
+- Documentation for getachost(), improvements for getacfilesz().
+- Fix a directory descriptor leak that happened when audit trail partitions
+ filled.
+- Support for more Linux distributions with a partial contemporary endian.h.
+- Improved escaping of XML-encapsulated BSM.
+- A variety of minor documentation, style, and functional.
+
OpenBSM 1.1p2
- Fix audit_event definitions of AUE_OPENAT_RWT and AUE_OPENAT_RWTC.
@@ -464,4 +495,4 @@
to support reloading of kernel event table.
- Allow comments in /etc/security configuration files.
-$P4: //depot/projects/trustedbsd/openbsm/NEWS#43 $
+$P4: //depot/projects/trustedbsd/openbsm/NEWS#55 $
Modified: trunk/contrib/openbsm/README
===================================================================
--- trunk/contrib/openbsm/README 2016-09-18 22:43:06 UTC (rev 8504)
+++ trunk/contrib/openbsm/README 2016-09-18 22:45:22 UTC (rev 8505)
@@ -1,4 +1,4 @@
-OpenBSM 1.1p2
+OpenBSM 1.2a2
Introduction
@@ -38,6 +38,7 @@
audit Command line audit control tool
auditd Audit management daemon
+ auditdistd Audit trail distribution daemon
auditfilterd Experimental event monitoring framework
auditreduce Audit trail reduction tool
audump Debugging tool to parse and print audit databases
@@ -64,4 +65,4 @@
http://www.TrustedBSD.org/
-$P4: //depot/projects/trustedbsd/openbsm/README#37 $
+$P4: //depot/projects/trustedbsd/openbsm/README#41 $
Modified: trunk/contrib/openbsm/TODO
===================================================================
--- trunk/contrib/openbsm/TODO 2016-09-18 22:43:06 UTC (rev 8504)
+++ trunk/contrib/openbsm/TODO 2016-09-18 22:45:22 UTC (rev 8505)
@@ -21,5 +21,7 @@
alternative locations can be used.
- NLS support for au_strerror(3), which provides error strings for BSM errors
not available on the local OS platform.
+- Support for client certificates in auditdistd, to include certificate chain
+ validation.
-$P4: //depot/projects/trustedbsd/openbsm/TODO#13 $
+$P4: //depot/projects/trustedbsd/openbsm/TODO#14 $
Modified: trunk/contrib/openbsm/VERSION
===================================================================
--- trunk/contrib/openbsm/VERSION 2016-09-18 22:43:06 UTC (rev 8504)
+++ trunk/contrib/openbsm/VERSION 2016-09-18 22:45:22 UTC (rev 8505)
@@ -1 +1 @@
-OPENBSM_1_1p2
+OPENBSM_1_2_alpha3
Modified: trunk/contrib/openbsm/aclocal.m4
===================================================================
--- trunk/contrib/openbsm/aclocal.m4 2016-09-18 22:43:06 UTC (rev 8504)
+++ trunk/contrib/openbsm/aclocal.m4 2016-09-18 22:45:22 UTC (rev 8505)
@@ -1,7 +1,7 @@
-# generated automatically by aclocal 1.10.1 -*- Autoconf -*-
+# generated automatically by aclocal 1.12.2 -*- Autoconf -*-
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+# Copyright (C) 1996-2012 Free Software Foundation, Inc.
+
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@@ -13,109 +13,207 @@
m4_ifndef([AC_AUTOCONF_VERSION],
[m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
-m4_if(AC_AUTOCONF_VERSION, [2.62],,
-[m4_warning([this file was generated for autoconf 2.62.
+m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],,
+[m4_warning([this file was generated for autoconf 2.69.
You have another version of autoconf. It may work, but is not guaranteed to.
If you have problems, you may need to regenerate the build system entirely.
-To do so, use the procedure documented by the package, typically `autoreconf'.])])
+To do so, use the procedure documented by the package, typically 'autoreconf'.])])
# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
+#
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+# 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+# Foundation, Inc.
+# Written by Gordon Matzigkeit, 1996
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
-# serial 52 AC_PROG_LIBTOOL
+m4_define([_LT_COPYING], [dnl
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+# 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+# Foundation, Inc.
+# Written by Gordon Matzigkeit, 1996
+#
+# This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# As a special exception to the GNU General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU Libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING. If not, a copy
+# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
+# obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+])
+# serial 57 LT_INIT
-# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED)
-# -----------------------------------------------------------
-# If this macro is not defined by Autoconf, define it here.
-m4_ifdef([AC_PROVIDE_IFELSE],
- [],
- [m4_define([AC_PROVIDE_IFELSE],
- [m4_ifdef([AC_PROVIDE_$1],
- [$2], [$3])])])
+# LT_PREREQ(VERSION)
+# ------------------
+# Complain and exit if this libtool version is less that VERSION.
+m4_defun([LT_PREREQ],
+[m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1,
+ [m4_default([$3],
+ [m4_fatal([Libtool version $1 or higher is required],
+ 63)])],
+ [$2])])
-# AC_PROG_LIBTOOL
-# ---------------
-AC_DEFUN([AC_PROG_LIBTOOL],
-[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl
-dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX
-dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX.
- AC_PROVIDE_IFELSE([AC_PROG_CXX],
- [AC_LIBTOOL_CXX],
- [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX
- ])])
-dnl And a similar setup for Fortran 77 support
- AC_PROVIDE_IFELSE([AC_PROG_F77],
- [AC_LIBTOOL_F77],
- [define([AC_PROG_F77], defn([AC_PROG_F77])[AC_LIBTOOL_F77
-])])
-dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly.
-dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run
-dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both.
- AC_PROVIDE_IFELSE([AC_PROG_GCJ],
- [AC_LIBTOOL_GCJ],
- [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
- [AC_LIBTOOL_GCJ],
- [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],
- [AC_LIBTOOL_GCJ],
- [ifdef([AC_PROG_GCJ],
- [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])
- ifdef([A][M_PROG_GCJ],
- [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ])])
- ifdef([LT_AC_PROG_GCJ],
- [define([LT_AC_PROG_GCJ],
- defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])])])
-])])# AC_PROG_LIBTOOL
+# _LT_CHECK_BUILDDIR
+# ------------------
+# Complain if the absolute build directory name contains unusual characters
+m4_defun([_LT_CHECK_BUILDDIR],
+[case `pwd` in
+ *\ * | *\ *)
+ AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;;
+esac
+])
-# _AC_PROG_LIBTOOL
-# ----------------
-AC_DEFUN([_AC_PROG_LIBTOOL],
-[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_F77])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl
+# LT_INIT([OPTIONS])
+# ------------------
+AC_DEFUN([LT_INIT],
+[AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT
+AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
+AC_BEFORE([$0], [LT_LANG])dnl
+AC_BEFORE([$0], [LT_OUTPUT])dnl
+AC_BEFORE([$0], [LTDL_INIT])dnl
+m4_require([_LT_CHECK_BUILDDIR])dnl
+dnl Autoconf doesn't catch unexpanded LT_ macros by default:
+m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl
+m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl
+dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4
+dnl unless we require an AC_DEFUNed macro:
+AC_REQUIRE([LTOPTIONS_VERSION])dnl
+AC_REQUIRE([LTSUGAR_VERSION])dnl
+AC_REQUIRE([LTVERSION_VERSION])dnl
+AC_REQUIRE([LTOBSOLETE_VERSION])dnl
+m4_require([_LT_PROG_LTMAIN])dnl
+
+_LT_SHELL_INIT([SHELL=${CONFIG_SHELL-/bin/sh}])
+
+dnl Parse OPTIONS
+_LT_SET_OPTIONS([$0], [$1])
+
# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
+LIBTOOL_DEPS="$ltmain"
# Always use our own libtool.
LIBTOOL='$(SHELL) $(top_builddir)/libtool'
AC_SUBST(LIBTOOL)dnl
-# Prevent multiple expansion
-define([AC_PROG_LIBTOOL], [])
-])# _AC_PROG_LIBTOOL
+_LT_SETUP
+# Only expand once:
+m4_define([LT_INIT])
+])# LT_INIT
-# AC_LIBTOOL_SETUP
-# ----------------
-AC_DEFUN([AC_LIBTOOL_SETUP],
-[AC_PREREQ(2.50)dnl
-AC_REQUIRE([AC_ENABLE_SHARED])dnl
-AC_REQUIRE([AC_ENABLE_STATIC])dnl
-AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
+# Old names:
+AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT])
+AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_PROG_LIBTOOL], [])
+dnl AC_DEFUN([AM_PROG_LIBTOOL], [])
+
+
+# _LT_CC_BASENAME(CC)
+# -------------------
+# Calculate cc_basename. Skip known compiler wrappers and cross-prefix.
+m4_defun([_LT_CC_BASENAME],
+[for cc_temp in $1""; do
+ case $cc_temp in
+ compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
+ distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
+ \-*) ;;
+ *) break;;
+ esac
+done
+cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+])
+
+
+# _LT_FILEUTILS_DEFAULTS
+# ----------------------
+# It is okay to use these file commands and assume they have been set
+# sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'.
+m4_defun([_LT_FILEUTILS_DEFAULTS],
+[: ${CP="cp -f"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+])# _LT_FILEUTILS_DEFAULTS
+
+
+# _LT_SETUP
+# ---------
+m4_defun([_LT_SETUP],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+AC_REQUIRE([_LT_PREPARE_SED_QUOTE_VARS])dnl
+AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl
+
+_LT_DECL([], [PATH_SEPARATOR], [1], [The PATH separator for the build system])dnl
+dnl
+_LT_DECL([], [host_alias], [0], [The host system])dnl
+_LT_DECL([], [host], [0])dnl
+_LT_DECL([], [host_os], [0])dnl
+dnl
+_LT_DECL([], [build_alias], [0], [The build system])dnl
+_LT_DECL([], [build], [0])dnl
+_LT_DECL([], [build_os], [0])dnl
+dnl
AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_PROG_LD])dnl
-AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
-AC_REQUIRE([AC_PROG_NM])dnl
-
+AC_REQUIRE([LT_PATH_LD])dnl
+AC_REQUIRE([LT_PATH_NM])dnl
+dnl
AC_REQUIRE([AC_PROG_LN_S])dnl
-AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
-# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
-AC_REQUIRE([AC_OBJEXT])dnl
-AC_REQUIRE([AC_EXEEXT])dnl
+test -z "$LN_S" && LN_S="ln -s"
+_LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl
dnl
-AC_LIBTOOL_SYS_MAX_CMD_LEN
-AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
-AC_LIBTOOL_OBJDIR
+AC_REQUIRE([LT_CMD_MAX_LEN])dnl
+_LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl
+_LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl
+dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_CHECK_SHELL_FEATURES])dnl
+m4_require([_LT_PATH_CONVERSION_FUNCTIONS])dnl
+m4_require([_LT_CMD_RELOAD])dnl
+m4_require([_LT_CHECK_MAGIC_METHOD])dnl
+m4_require([_LT_CHECK_SHAREDLIB_FROM_LINKLIB])dnl
+m4_require([_LT_CMD_OLD_ARCHIVE])dnl
+m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
+m4_require([_LT_WITH_SYSROOT])dnl
-AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
-_LT_AC_PROG_ECHO_BACKSLASH
+_LT_CONFIG_LIBTOOL_INIT([
+# See if we are running on zsh, and set the options which allow our
+# commands through without removal of \ escapes INIT.
+if test -n "\${ZSH_VERSION+set}" ; then
+ setopt NO_GLOB_SUBST
+fi
+])
+if test -n "${ZSH_VERSION+set}" ; then
+ setopt NO_GLOB_SUBST
+fi
+_LT_CHECK_OBJDIR
+
+m4_require([_LT_TAG_COMPILER])dnl
+
case $host_os in
aix3*)
# AIX sometimes has problems with the GCC collect2 program. For some
@@ -128,118 +226,706 @@
;;
esac
-# Sed substitution that helps us do robust quoting. It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed='sed -e 1s/^X//'
-[sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g']
-
-# Same as above, but do not quote variable references.
-[double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g']
-
-# Sed substitution to delay expansion of an escaped shell variable in a
-# double_quote_subst'ed string.
-delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
-
-# Sed substitution to avoid accidental globbing in evaled expressions
-no_glob_subst='s/\*/\\\*/g'
-
-# Constants:
-rm="rm -f"
-
# Global variables:
-default_ofile=libtool
+ofile=libtool
can_build_shared=yes
# All known linkers require a `.a' archive for static linking (except MSVC,
# which needs '.lib').
libext=a
-ltmain="$ac_aux_dir/ltmain.sh"
-ofile="$default_ofile"
+
with_gnu_ld="$lt_cv_prog_gnu_ld"
-AC_CHECK_TOOL(AR, ar, false)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-AC_CHECK_TOOL(STRIP, strip, :)
-
old_CC="$CC"
old_CFLAGS="$CFLAGS"
# Set sane defaults for various variables
-test -z "$AR" && AR=ar
-test -z "$AR_FLAGS" && AR_FLAGS=cru
-test -z "$AS" && AS=as
test -z "$CC" && CC=cc
test -z "$LTCC" && LTCC=$CC
test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
-test -z "$DLLTOOL" && DLLTOOL=dlltool
test -z "$LD" && LD=ld
-test -z "$LN_S" && LN_S="ln -s"
-test -z "$MAGIC_CMD" && MAGIC_CMD=file
-test -z "$NM" && NM=nm
-test -z "$SED" && SED=sed
-test -z "$OBJDUMP" && OBJDUMP=objdump
-test -z "$RANLIB" && RANLIB=:
-test -z "$STRIP" && STRIP=:
test -z "$ac_objext" && ac_objext=o
-# Determine commands to create old-style static archives.
-old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
-old_postinstall_cmds='chmod 644 $oldlib'
-old_postuninstall_cmds=
-
-if test -n "$RANLIB"; then
- case $host_os in
- openbsd*)
- old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
- ;;
- *)
- old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
- ;;
- esac
- old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
-fi
-
_LT_CC_BASENAME([$compiler])
# Only perform the check for file, if the check method requires it
+test -z "$MAGIC_CMD" && MAGIC_CMD=file
case $deplibs_check_method in
file_magic*)
if test "$file_magic_cmd" = '$MAGIC_CMD'; then
- AC_PATH_MAGIC
+ _LT_PATH_MAGIC
fi
;;
esac
-_LT_REQUIRED_DARWIN_CHECKS
+# Use C for the default configuration in the libtool script
+LT_SUPPORTED_TAG([CC])
+_LT_LANG_C_CONFIG
+_LT_LANG_DEFAULT_CONFIG
+_LT_CONFIG_COMMANDS
+])# _LT_SETUP
-AC_PROVIDE_IFELSE([AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no)
-AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
-enable_win32_dll=yes, enable_win32_dll=no)
-AC_ARG_ENABLE([libtool-lock],
- [AC_HELP_STRING([--disable-libtool-lock],
- [avoid locking (might break parallel builds)])])
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+# _LT_PREPARE_SED_QUOTE_VARS
+# --------------------------
+# Define a few sed substitution that help us do robust quoting.
+m4_defun([_LT_PREPARE_SED_QUOTE_VARS],
+[# Backslashify metacharacters that are still active within
+# double-quoted strings.
+sed_quote_subst='s/\([["`$\\]]\)/\\\1/g'
-AC_ARG_WITH([pic],
- [AC_HELP_STRING([--with-pic],
- [try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
- [pic_mode="$withval"],
- [pic_mode=default])
-test -z "$pic_mode" && pic_mode=default
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\([["`\\]]\)/\\\1/g'
-# Use C for the default configuration in the libtool script
-tagname=
-AC_LIBTOOL_LANG_C_CONFIG
-_LT_AC_TAGCONFIG
-])# AC_LIBTOOL_SETUP
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+# Sed substitution to delay expansion of an escaped single quote.
+delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
-# _LT_AC_SYS_COMPILER
+# Sed substitution to avoid accidental globbing in evaled expressions
+no_glob_subst='s/\*/\\\*/g'
+])
+
+# _LT_PROG_LTMAIN
+# ---------------
+# Note that this code is called both from `configure', and `config.status'
+# now that we use AC_CONFIG_COMMANDS to generate libtool. Notably,
+# `config.status' has no value for ac_aux_dir unless we are using Automake,
+# so we pass a copy along to make sure it has a sensible value anyway.
+m4_defun([_LT_PROG_LTMAIN],
+[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl
+_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir'])
+ltmain="$ac_aux_dir/ltmain.sh"
+])# _LT_PROG_LTMAIN
+
+
+
+# So that we can recreate a full libtool script including additional
+# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS
+# in macros and then make a single call at the end using the `libtool'
+# label.
+
+
+# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS])
+# ----------------------------------------
+# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later.
+m4_define([_LT_CONFIG_LIBTOOL_INIT],
+[m4_ifval([$1],
+ [m4_append([_LT_OUTPUT_LIBTOOL_INIT],
+ [$1
+])])])
+
+# Initialize.
+m4_define([_LT_OUTPUT_LIBTOOL_INIT])
+
+
+# _LT_CONFIG_LIBTOOL([COMMANDS])
+# ------------------------------
+# Register COMMANDS to be passed to AC_CONFIG_COMMANDS later.
+m4_define([_LT_CONFIG_LIBTOOL],
+[m4_ifval([$1],
+ [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS],
+ [$1
+])])])
+
+# Initialize.
+m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS])
+
+
+# _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS])
+# -----------------------------------------------------
+m4_defun([_LT_CONFIG_SAVE_COMMANDS],
+[_LT_CONFIG_LIBTOOL([$1])
+_LT_CONFIG_LIBTOOL_INIT([$2])
+])
+
+
+# _LT_FORMAT_COMMENT([COMMENT])
+# -----------------------------
+# Add leading comment marks to the start of each line, and a trailing
+# full-stop to the whole comment if one is not present already.
+m4_define([_LT_FORMAT_COMMENT],
+[m4_ifval([$1], [
+m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])],
+ [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.])
+)])
+
+
+
+
+
+# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?])
+# -------------------------------------------------------------------
+# CONFIGNAME is the name given to the value in the libtool script.
+# VARNAME is the (base) name used in the configure script.
+# VALUE may be 0, 1 or 2 for a computed quote escaped value based on
+# VARNAME. Any other value will be used directly.
+m4_define([_LT_DECL],
+[lt_if_append_uniq([lt_decl_varnames], [$2], [, ],
+ [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name],
+ [m4_ifval([$1], [$1], [$2])])
+ lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3])
+ m4_ifval([$4],
+ [lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])])
+ lt_dict_add_subkey([lt_decl_dict], [$2],
+ [tagged?], [m4_ifval([$5], [yes], [no])])])
+])
+
+
+# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION])
+# --------------------------------------------------------
+m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])])
+
+
+# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...])
+# ------------------------------------------------
+m4_define([lt_decl_tag_varnames],
+[_lt_decl_filter([tagged?], [yes], $@)])
+
+
+# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..])
+# ---------------------------------------------------------
+m4_define([_lt_decl_filter],
+[m4_case([$#],
+ [0], [m4_fatal([$0: too few arguments: $#])],
+ [1], [m4_fatal([$0: too few arguments: $#: $1])],
+ [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)],
+ [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)],
+ [lt_dict_filter([lt_decl_dict], $@)])[]dnl
+])
+
+
+# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...])
+# --------------------------------------------------
+m4_define([lt_decl_quote_varnames],
+[_lt_decl_filter([value], [1], $@)])
+
+
+# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...])
+# ---------------------------------------------------
+m4_define([lt_decl_dquote_varnames],
+[_lt_decl_filter([value], [2], $@)])
+
+
+# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...])
+# ---------------------------------------------------
+m4_define([lt_decl_varnames_tagged],
+[m4_assert([$# <= 2])dnl
+_$0(m4_quote(m4_default([$1], [[, ]])),
+ m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]),
+ m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))])
+m4_define([_lt_decl_varnames_tagged],
+[m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])])
+
+
+# lt_decl_all_varnames([SEPARATOR], [VARNAME1...])
+# ------------------------------------------------
+m4_define([lt_decl_all_varnames],
+[_$0(m4_quote(m4_default([$1], [[, ]])),
+ m4_if([$2], [],
+ m4_quote(lt_decl_varnames),
+ m4_quote(m4_shift($@))))[]dnl
+])
+m4_define([_lt_decl_all_varnames],
+[lt_join($@, lt_decl_varnames_tagged([$1],
+ lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl
+])
+
+
+# _LT_CONFIG_STATUS_DECLARE([VARNAME])
+# ------------------------------------
+# Quote a variable value, and forward it to `config.status' so that its
+# declaration there will have the same value as in `configure'. VARNAME
+# must have a single quote delimited value for this to work.
+m4_define([_LT_CONFIG_STATUS_DECLARE],
+[$1='`$ECHO "$][$1" | $SED "$delay_single_quote_subst"`'])
+
+
+# _LT_CONFIG_STATUS_DECLARATIONS
+# ------------------------------
+# We delimit libtool config variables with single quotes, so when
+# we write them to config.status, we have to be sure to quote all
+# embedded single quotes properly. In configure, this macro expands
+# each variable declared with _LT_DECL (and _LT_TAGDECL) into:
+#
+# <var>='`$ECHO "$<var>" | $SED "$delay_single_quote_subst"`'
+m4_defun([_LT_CONFIG_STATUS_DECLARATIONS],
+[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames),
+ [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])])
+
+
+# _LT_LIBTOOL_TAGS
+# ----------------
+# Output comment and list of tags supported by the script
+m4_defun([_LT_LIBTOOL_TAGS],
+[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl
+available_tags="_LT_TAGS"dnl
+])
+
+
+# _LT_LIBTOOL_DECLARE(VARNAME, [TAG])
+# -----------------------------------
+# Extract the dictionary values for VARNAME (optionally with TAG) and
+# expand to a commented shell variable setting:
+#
+# # Some comment about what VAR is for.
+# visible_name=$lt_internal_name
+m4_define([_LT_LIBTOOL_DECLARE],
+[_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1],
+ [description])))[]dnl
+m4_pushdef([_libtool_name],
+ m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl
+m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])),
+ [0], [_libtool_name=[$]$1],
+ [1], [_libtool_name=$lt_[]$1],
+ [2], [_libtool_name=$lt_[]$1],
+ [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl
+m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl
+])
+
+
+# _LT_LIBTOOL_CONFIG_VARS
+# -----------------------
+# Produce commented declarations of non-tagged libtool config variables
+# suitable for insertion in the LIBTOOL CONFIG section of the `libtool'
+# script. Tagged libtool config variables (even for the LIBTOOL CONFIG
+# section) are produced by _LT_LIBTOOL_TAG_VARS.
+m4_defun([_LT_LIBTOOL_CONFIG_VARS],
+[m4_foreach([_lt_var],
+ m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)),
+ [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])])
+
+
+# _LT_LIBTOOL_TAG_VARS(TAG)
+# -------------------------
+m4_define([_LT_LIBTOOL_TAG_VARS],
+[m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames),
+ [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])])
+
+
+# _LT_TAGVAR(VARNAME, [TAGNAME])
+# ------------------------------
+m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])])
+
+
+# _LT_CONFIG_COMMANDS
# -------------------
-AC_DEFUN([_LT_AC_SYS_COMPILER],
+# Send accumulated output to $CONFIG_STATUS. Thanks to the lists of
+# variables for single and double quote escaping we saved from calls
+# to _LT_DECL, we can put quote escaped variables declarations
+# into `config.status', and then the shell code to quote escape them in
+# for loops in `config.status'. Finally, any additional code accumulated
+# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded.
+m4_defun([_LT_CONFIG_COMMANDS],
+[AC_PROVIDE_IFELSE([LT_OUTPUT],
+ dnl If the libtool generation code has been placed in $CONFIG_LT,
+ dnl instead of duplicating it all over again into config.status,
+ dnl then we will have config.status run $CONFIG_LT later, so it
+ dnl needs to know what name is stored there:
+ [AC_CONFIG_COMMANDS([libtool],
+ [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])],
+ dnl If the libtool generation code is destined for config.status,
+ dnl expand the accumulated commands and init code now:
+ [AC_CONFIG_COMMANDS([libtool],
+ [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])])
+])#_LT_CONFIG_COMMANDS
+
+
+# Initialize.
+m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT],
+[
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+sed_quote_subst='$sed_quote_subst'
+double_quote_subst='$double_quote_subst'
+delay_variable_subst='$delay_variable_subst'
+_LT_CONFIG_STATUS_DECLARATIONS
+LTCC='$LTCC'
+LTCFLAGS='$LTCFLAGS'
+compiler='$compiler_DEFAULT'
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+ eval 'cat <<_LTECHO_EOF
+\$[]1
+_LTECHO_EOF'
+}
+
+# Quote evaled strings.
+for var in lt_decl_all_varnames([[ \
+]], lt_decl_quote_varnames); do
+ case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+ *[[\\\\\\\`\\"\\\$]]*)
+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+ ;;
+ *)
+ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+ ;;
+ esac
+done
+
+# Double-quote double-evaled strings.
+for var in lt_decl_all_varnames([[ \
+]], lt_decl_dquote_varnames); do
+ case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+ *[[\\\\\\\`\\"\\\$]]*)
+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+ ;;
+ *)
+ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+ ;;
+ esac
+done
+
+_LT_OUTPUT_LIBTOOL_INIT
+])
+
+# _LT_GENERATED_FILE_INIT(FILE, [COMMENT])
+# ------------------------------------
+# Generate a child script FILE with all initialization necessary to
+# reuse the environment learned by the parent script, and make the
+# file executable. If COMMENT is supplied, it is inserted after the
+# `#!' sequence but before initialization text begins. After this
+# macro, additional text can be appended to FILE to form the body of
+# the child script. The macro ends with non-zero status if the
+# file could not be fully written (such as if the disk is full).
+m4_ifdef([AS_INIT_GENERATED],
+[m4_defun([_LT_GENERATED_FILE_INIT],[AS_INIT_GENERATED($@)])],
+[m4_defun([_LT_GENERATED_FILE_INIT],
+[m4_require([AS_PREPARE])]dnl
+[m4_pushdef([AS_MESSAGE_LOG_FD])]dnl
+[lt_write_fail=0
+cat >$1 <<_ASEOF || lt_write_fail=1
+#! $SHELL
+# Generated by $as_me.
+$2
+SHELL=\${CONFIG_SHELL-$SHELL}
+export SHELL
+_ASEOF
+cat >>$1 <<\_ASEOF || lt_write_fail=1
+AS_SHELL_SANITIZE
+_AS_PREPARE
+exec AS_MESSAGE_FD>&1
+_ASEOF
+test $lt_write_fail = 0 && chmod +x $1[]dnl
+m4_popdef([AS_MESSAGE_LOG_FD])])])# _LT_GENERATED_FILE_INIT
+
+# LT_OUTPUT
+# ---------
+# This macro allows early generation of the libtool script (before
+# AC_OUTPUT is called), incase it is used in configure for compilation
+# tests.
+AC_DEFUN([LT_OUTPUT],
+[: ${CONFIG_LT=./config.lt}
+AC_MSG_NOTICE([creating $CONFIG_LT])
+_LT_GENERATED_FILE_INIT(["$CONFIG_LT"],
+[# Run this file to recreate a libtool stub with the current configuration.])
+
+cat >>"$CONFIG_LT" <<\_LTEOF
+lt_cl_silent=false
+exec AS_MESSAGE_LOG_FD>>config.log
+{
+ echo
+ AS_BOX([Running $as_me.])
+} >&AS_MESSAGE_LOG_FD
+
+lt_cl_help="\
+\`$as_me' creates a local libtool stub from the current configuration,
+for use in further configure time tests before the real libtool is
+generated.
+
+Usage: $[0] [[OPTIONS]]
+
+ -h, --help print this help, then exit
+ -V, --version print version number, then exit
+ -q, --quiet do not print progress messages
+ -d, --debug don't remove temporary files
+
+Report bugs to <bug-libtool at gnu.org>."
+
+lt_cl_version="\
+m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl
+m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION])
+configured by $[0], generated by m4_PACKAGE_STRING.
+
+Copyright (C) 2011 Free Software Foundation, Inc.
+This config.lt script is free software; the Free Software Foundation
+gives unlimited permision to copy, distribute and modify it."
+
+while test $[#] != 0
+do
+ case $[1] in
+ --version | --v* | -V )
+ echo "$lt_cl_version"; exit 0 ;;
+ --help | --h* | -h )
+ echo "$lt_cl_help"; exit 0 ;;
+ --debug | --d* | -d )
+ debug=: ;;
+ --quiet | --q* | --silent | --s* | -q )
+ lt_cl_silent=: ;;
+
+ -*) AC_MSG_ERROR([unrecognized option: $[1]
+Try \`$[0] --help' for more information.]) ;;
+
+ *) AC_MSG_ERROR([unrecognized argument: $[1]
+Try \`$[0] --help' for more information.]) ;;
+ esac
+ shift
+done
+
+if $lt_cl_silent; then
+ exec AS_MESSAGE_FD>/dev/null
+fi
+_LTEOF
+
+cat >>"$CONFIG_LT" <<_LTEOF
+_LT_OUTPUT_LIBTOOL_COMMANDS_INIT
+_LTEOF
+
+cat >>"$CONFIG_LT" <<\_LTEOF
+AC_MSG_NOTICE([creating $ofile])
+_LT_OUTPUT_LIBTOOL_COMMANDS
+AS_EXIT(0)
+_LTEOF
+chmod +x "$CONFIG_LT"
+
+# configure is writing to config.log, but config.lt does its own redirection,
+# appending to config.log, which fails on DOS, as config.log is still kept
+# open by configure. Here we exec the FD to /dev/null, effectively closing
+# config.log, so it can be properly (re)opened and appended to by config.lt.
+lt_cl_success=:
+test "$silent" = yes &&
+ lt_config_lt_args="$lt_config_lt_args --quiet"
+exec AS_MESSAGE_LOG_FD>/dev/null
+$SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
+exec AS_MESSAGE_LOG_FD>>config.log
+$lt_cl_success || AS_EXIT(1)
+])# LT_OUTPUT
+
+
+# _LT_CONFIG(TAG)
+# ---------------
+# If TAG is the built-in tag, create an initial libtool script with a
+# default configuration from the untagged config vars. Otherwise add code
+# to config.status for appending the configuration named by TAG from the
+# matching tagged config vars.
+m4_defun([_LT_CONFIG],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+_LT_CONFIG_SAVE_COMMANDS([
+ m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl
+ m4_if(_LT_TAG, [C], [
+ # See if we are running on zsh, and set the options which allow our
+ # commands through without removal of \ escapes.
+ if test -n "${ZSH_VERSION+set}" ; then
+ setopt NO_GLOB_SUBST
+ fi
+
+ cfgfile="${ofile}T"
+ trap "$RM \"$cfgfile\"; exit 1" 1 2 15
+ $RM "$cfgfile"
+
+ cat <<_LT_EOF >> "$cfgfile"
+#! $SHELL
+
+# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
+# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+#
+_LT_COPYING
+_LT_LIBTOOL_TAGS
+
+# ### BEGIN LIBTOOL CONFIG
+_LT_LIBTOOL_CONFIG_VARS
+_LT_LIBTOOL_TAG_VARS
+# ### END LIBTOOL CONFIG
+
+_LT_EOF
+
+ case $host_os in
+ aix3*)
+ cat <<\_LT_EOF >> "$cfgfile"
+# AIX sometimes has problems with the GCC collect2 program. For some
+# reason, if we set the COLLECT_NAMES environment variable, the problems
+# vanish in a puff of smoke.
+if test "X${COLLECT_NAMES+set}" != Xset; then
+ COLLECT_NAMES=
+ export COLLECT_NAMES
+fi
+_LT_EOF
+ ;;
+ esac
+
+ _LT_PROG_LTMAIN
+
+ # We use sed instead of cat because bash on DJGPP gets confused if
+ # if finds mixed CR/LF and LF-only lines. Since sed operates in
+ # text mode, it properly converts lines to CR/LF. This bash problem
+ # is reportedly fixed, but why not run on old versions too?
+ sed '$q' "$ltmain" >> "$cfgfile" \
+ || (rm -f "$cfgfile"; exit 1)
+
+ _LT_PROG_REPLACE_SHELLFNS
+
+ mv -f "$cfgfile" "$ofile" ||
+ (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
+ chmod +x "$ofile"
+],
+[cat <<_LT_EOF >> "$ofile"
+
+dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded
+dnl in a comment (ie after a #).
+# ### BEGIN LIBTOOL TAG CONFIG: $1
+_LT_LIBTOOL_TAG_VARS(_LT_TAG)
+# ### END LIBTOOL TAG CONFIG: $1
+_LT_EOF
+])dnl /m4_if
+],
+[m4_if([$1], [], [
+ PACKAGE='$PACKAGE'
+ VERSION='$VERSION'
+ TIMESTAMP='$TIMESTAMP'
+ RM='$RM'
+ ofile='$ofile'], [])
+])dnl /_LT_CONFIG_SAVE_COMMANDS
+])# _LT_CONFIG
+
+
+# LT_SUPPORTED_TAG(TAG)
+# ---------------------
+# Trace this macro to discover what tags are supported by the libtool
+# --tag option, using:
+# autoconf --trace 'LT_SUPPORTED_TAG:$1'
+AC_DEFUN([LT_SUPPORTED_TAG], [])
+
+
+# C support is built-in for now
+m4_define([_LT_LANG_C_enabled], [])
+m4_define([_LT_TAGS], [])
+
+
+# LT_LANG(LANG)
+# -------------
+# Enable libtool support for the given language if not already enabled.
+AC_DEFUN([LT_LANG],
+[AC_BEFORE([$0], [LT_OUTPUT])dnl
+m4_case([$1],
+ [C], [_LT_LANG(C)],
+ [C++], [_LT_LANG(CXX)],
+ [Go], [_LT_LANG(GO)],
+ [Java], [_LT_LANG(GCJ)],
+ [Fortran 77], [_LT_LANG(F77)],
+ [Fortran], [_LT_LANG(FC)],
+ [Windows Resource], [_LT_LANG(RC)],
+ [m4_ifdef([_LT_LANG_]$1[_CONFIG],
+ [_LT_LANG($1)],
+ [m4_fatal([$0: unsupported language: "$1"])])])dnl
+])# LT_LANG
+
+
+# _LT_LANG(LANGNAME)
+# ------------------
+m4_defun([_LT_LANG],
+[m4_ifdef([_LT_LANG_]$1[_enabled], [],
+ [LT_SUPPORTED_TAG([$1])dnl
+ m4_append([_LT_TAGS], [$1 ])dnl
+ m4_define([_LT_LANG_]$1[_enabled], [])dnl
+ _LT_LANG_$1_CONFIG($1)])dnl
+])# _LT_LANG
+
+
+m4_ifndef([AC_PROG_GO], [
+# NOTE: This macro has been submitted for inclusion into #
+# GNU Autoconf as AC_PROG_GO. When it is available in #
+# a released version of Autoconf we should remove this #
+# macro and use it instead. #
+m4_defun([AC_PROG_GO],
+[AC_LANG_PUSH(Go)dnl
+AC_ARG_VAR([GOC], [Go compiler command])dnl
+AC_ARG_VAR([GOFLAGS], [Go compiler flags])dnl
+_AC_ARG_VAR_LDFLAGS()dnl
+AC_CHECK_TOOL(GOC, gccgo)
+if test -z "$GOC"; then
+ if test -n "$ac_tool_prefix"; then
+ AC_CHECK_PROG(GOC, [${ac_tool_prefix}gccgo], [${ac_tool_prefix}gccgo])
+ fi
+fi
+if test -z "$GOC"; then
+ AC_CHECK_PROG(GOC, gccgo, gccgo, false)
+fi
+])#m4_defun
+])#m4_ifndef
+
+
+# _LT_LANG_DEFAULT_CONFIG
+# -----------------------
+m4_defun([_LT_LANG_DEFAULT_CONFIG],
+[AC_PROVIDE_IFELSE([AC_PROG_CXX],
+ [LT_LANG(CXX)],
+ [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])])
+
+AC_PROVIDE_IFELSE([AC_PROG_F77],
+ [LT_LANG(F77)],
+ [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])])
+
+AC_PROVIDE_IFELSE([AC_PROG_FC],
+ [LT_LANG(FC)],
+ [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])])
+
+dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal
+dnl pulling things in needlessly.
+AC_PROVIDE_IFELSE([AC_PROG_GCJ],
+ [LT_LANG(GCJ)],
+ [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
+ [LT_LANG(GCJ)],
+ [AC_PROVIDE_IFELSE([LT_PROG_GCJ],
+ [LT_LANG(GCJ)],
+ [m4_ifdef([AC_PROG_GCJ],
+ [m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])])
+ m4_ifdef([A][M_PROG_GCJ],
+ [m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])])
+ m4_ifdef([LT_PROG_GCJ],
+ [m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])])
+
+AC_PROVIDE_IFELSE([AC_PROG_GO],
+ [LT_LANG(GO)],
+ [m4_define([AC_PROG_GO], defn([AC_PROG_GO])[LT_LANG(GO)])])
+
+AC_PROVIDE_IFELSE([LT_PROG_RC],
+ [LT_LANG(RC)],
+ [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])])
+])# _LT_LANG_DEFAULT_CONFIG
+
+# Obsolete macros:
+AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)])
+AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)])
+AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)])
+AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)])
+AU_DEFUN([AC_LIBTOOL_RC], [LT_LANG(Windows Resource)])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_CXX], [])
+dnl AC_DEFUN([AC_LIBTOOL_F77], [])
+dnl AC_DEFUN([AC_LIBTOOL_FC], [])
+dnl AC_DEFUN([AC_LIBTOOL_GCJ], [])
+dnl AC_DEFUN([AC_LIBTOOL_RC], [])
+
+
+# _LT_TAG_COMPILER
+# ----------------
+m4_defun([_LT_TAG_COMPILER],
[AC_REQUIRE([AC_PROG_CC])dnl
+_LT_DECL([LTCC], [CC], [1], [A C compiler])dnl
+_LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl
+_LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl
+_LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl
+
# If no C compiler was specified, use CC.
LTCC=${LTCC-"$CC"}
@@ -248,36 +934,20 @@
# Allow CC to be a program name with arguments.
compiler=$CC
-])# _LT_AC_SYS_COMPILER
+])# _LT_TAG_COMPILER
-# _LT_CC_BASENAME(CC)
-# -------------------
-# Calculate cc_basename. Skip known compiler wrappers and cross-prefix.
-AC_DEFUN([_LT_CC_BASENAME],
-[for cc_temp in $1""; do
- case $cc_temp in
- compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
- distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
- \-*) ;;
- *) break;;
- esac
-done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-])
-
-
# _LT_COMPILER_BOILERPLATE
# ------------------------
# Check for compiler boilerplate output or warnings with
# the simple compiler test code.
-AC_DEFUN([_LT_COMPILER_BOILERPLATE],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
+m4_defun([_LT_COMPILER_BOILERPLATE],
+[m4_require([_LT_DECL_SED])dnl
ac_outfile=conftest.$ac_objext
echo "$lt_simple_compile_test_code" >conftest.$ac_ext
eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
_lt_compiler_boilerplate=`cat conftest.err`
-$rm conftest*
+$RM conftest*
])# _LT_COMPILER_BOILERPLATE
@@ -285,40 +955,65 @@
# ----------------------
# Check for linker boilerplate output or warnings with
# the simple link test code.
-AC_DEFUN([_LT_LINKER_BOILERPLATE],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
+m4_defun([_LT_LINKER_BOILERPLATE],
+[m4_require([_LT_DECL_SED])dnl
ac_outfile=conftest.$ac_objext
echo "$lt_simple_link_test_code" >conftest.$ac_ext
eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
_lt_linker_boilerplate=`cat conftest.err`
-$rm -r conftest*
+$RM -r conftest*
])# _LT_LINKER_BOILERPLATE
# _LT_REQUIRED_DARWIN_CHECKS
-# --------------------------
-# Check for some things on darwin
-AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS],[
+# -------------------------
+m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[
case $host_os in
rhapsody* | darwin*)
AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:])
AC_CHECK_TOOL([NMEDIT], [nmedit], [:])
+ AC_CHECK_TOOL([LIPO], [lipo], [:])
+ AC_CHECK_TOOL([OTOOL], [otool], [:])
+ AC_CHECK_TOOL([OTOOL64], [otool64], [:])
+ _LT_DECL([], [DSYMUTIL], [1],
+ [Tool to manipulate archived DWARF debug symbol files on Mac OS X])
+ _LT_DECL([], [NMEDIT], [1],
+ [Tool to change global to local symbols on Mac OS X])
+ _LT_DECL([], [LIPO], [1],
+ [Tool to manipulate fat objects and archives on Mac OS X])
+ _LT_DECL([], [OTOOL], [1],
+ [ldd/readelf like tool for Mach-O binaries on Mac OS X])
+ _LT_DECL([], [OTOOL64], [1],
+ [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4])
AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod],
[lt_cv_apple_cc_single_mod=no
if test -z "${LT_MULTI_MODULE}"; then
- # By default we will add the -single_module flag. You can override
- # by either setting the environment variable LT_MULTI_MODULE
- # non-empty at configure time, or by adding -multi_module to the
- # link flags.
- echo "int foo(void){return 1;}" > conftest.c
- $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
- -dynamiclib ${wl}-single_module conftest.c
- if test -f libconftest.dylib; then
- lt_cv_apple_cc_single_mod=yes
- rm -rf libconftest.dylib*
- fi
- rm conftest.c
+ # By default we will add the -single_module flag. You can override
+ # by either setting the environment variable LT_MULTI_MODULE
+ # non-empty at configure time, or by adding -multi_module to the
+ # link flags.
+ rm -rf libconftest.dylib*
+ echo "int foo(void){return 1;}" > conftest.c
+ echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+-dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD
+ $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+ -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
+ _lt_result=$?
+ # If there is a non-empty error log, and "single_module"
+ # appears in it, assume the flag caused a linker warning
+ if test -s conftest.err && $GREP single_module conftest.err; then
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ # Otherwise, if the output was created with a 0 exit code from
+ # the compiler, it worked.
+ elif test -f libconftest.dylib && test $_lt_result -eq 0; then
+ lt_cv_apple_cc_single_mod=yes
+ else
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ fi
+ rm -rf libconftest.dylib*
+ rm -f conftest.*
fi])
+
AC_CACHE_CHECK([for -exported_symbols_list linker flag],
[lt_cv_ld_exported_symbols_list],
[lt_cv_ld_exported_symbols_list=no
@@ -326,26 +1021,54 @@
echo "_main" > conftest.sym
LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
- [lt_cv_ld_exported_symbols_list=yes],
- [lt_cv_ld_exported_symbols_list=no])
- LDFLAGS="$save_LDFLAGS"
+ [lt_cv_ld_exported_symbols_list=yes],
+ [lt_cv_ld_exported_symbols_list=no])
+ LDFLAGS="$save_LDFLAGS"
])
+
+ AC_CACHE_CHECK([for -force_load linker flag],[lt_cv_ld_force_load],
+ [lt_cv_ld_force_load=no
+ cat > conftest.c << _LT_EOF
+int forced_loaded() { return 2;}
+_LT_EOF
+ echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&AS_MESSAGE_LOG_FD
+ $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&AS_MESSAGE_LOG_FD
+ echo "$AR cru libconftest.a conftest.o" >&AS_MESSAGE_LOG_FD
+ $AR cru libconftest.a conftest.o 2>&AS_MESSAGE_LOG_FD
+ echo "$RANLIB libconftest.a" >&AS_MESSAGE_LOG_FD
+ $RANLIB libconftest.a 2>&AS_MESSAGE_LOG_FD
+ cat > conftest.c << _LT_EOF
+int main() { return 0;}
+_LT_EOF
+ echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&AS_MESSAGE_LOG_FD
+ $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err
+ _lt_result=$?
+ if test -s conftest.err && $GREP force_load conftest.err; then
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then
+ lt_cv_ld_force_load=yes
+ else
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ fi
+ rm -f conftest.err libconftest.a conftest conftest.c
+ rm -rf conftest.dSYM
+ ])
case $host_os in
- rhapsody* | darwin1.[[0123]])
+ rhapsody* | darwin1.[[012]])
_lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
darwin1.*)
- _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
- darwin*)
+ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+ darwin*) # darwin 5.x on
# if running on 10.5 or later, the deployment target defaults
# to the OS version, if on x86, and 10.4, the deployment
# target defaults to 10.4. Don't you love it?
case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
- 10.0,*86*-darwin8*|10.0,*-darwin[[91]]*)
- _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
- 10.[[012]]*)
- _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
- 10.*)
- _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+ 10.0,*86*-darwin8*|10.0,*-darwin[[91]]*)
+ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+ 10.[[012]]*)
+ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+ 10.*)
+ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
esac
;;
esac
@@ -355,10 +1078,10 @@
if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
_lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
else
- _lt_dar_export_syms="~$NMEDIT -s \$output_objdir/\${libname}-symbols.expsym \${lib}"
+ _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
fi
- if test "$DSYMUTIL" != ":"; then
- _lt_dsymutil="~$DSYMUTIL \$lib || :"
+ if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then
+ _lt_dsymutil='~$DSYMUTIL $lib || :'
else
_lt_dsymutil=
fi
@@ -366,8 +1089,49 @@
esac
])
-# _LT_AC_SYS_LIBPATH_AIX
-# ----------------------
+
+# _LT_DARWIN_LINKER_FEATURES([TAG])
+# ---------------------------------
+# Checks for linker and compiler features on darwin
+m4_defun([_LT_DARWIN_LINKER_FEATURES],
+[
+ m4_require([_LT_REQUIRED_DARWIN_CHECKS])
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_automatic, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+ if test "$lt_cv_ld_force_load" = "yes"; then
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+ m4_case([$1], [F77], [_LT_TAGVAR(compiler_needs_object, $1)=yes],
+ [FC], [_LT_TAGVAR(compiler_needs_object, $1)=yes])
+ else
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=''
+ fi
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined"
+ case $cc_basename in
+ ifort*) _lt_dar_can_shared=yes ;;
+ *) _lt_dar_can_shared=$GCC ;;
+ esac
+ if test "$_lt_dar_can_shared" = "yes"; then
+ output_verbose_link_cmd=func_echo_all
+ _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+ _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+ _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+ _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+ m4_if([$1], [CXX],
+[ if test "$lt_cv_apple_cc_single_mod" != "yes"; then
+ _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
+ _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
+ fi
+],[])
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+])
+
+# _LT_SYS_MODULE_PATH_AIX([TAGNAME])
+# ----------------------------------
# Links a minimal program and checks the executable
# for the system default hardcoded library path. In most cases,
# this is /usr/lib:/lib, but when the MPI compilers are used
@@ -374,198 +1138,140 @@
# the location of the communication and MPI libs are included too.
# If we don't find anything, use the default library path according
# to the aix ld manual.
-AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
-AC_LINK_IFELSE(AC_LANG_PROGRAM,[
-lt_aix_libpath_sed='
- /Import File Strings/,/^$/ {
- /^0/ {
- s/^0 *\(.*\)$/\1/
- p
- }
- }'
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then
- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-fi],[])
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-])# _LT_AC_SYS_LIBPATH_AIX
+# Store the results from the different compilers for each TAGNAME.
+# Allow to override them for all tags through lt_cv_aix_libpath.
+m4_defun([_LT_SYS_MODULE_PATH_AIX],
+[m4_require([_LT_DECL_SED])dnl
+if test "${lt_cv_aix_libpath+set}" = set; then
+ aix_libpath=$lt_cv_aix_libpath
+else
+ AC_CACHE_VAL([_LT_TAGVAR([lt_cv_aix_libpath_], [$1])],
+ [AC_LINK_IFELSE([AC_LANG_PROGRAM],[
+ lt_aix_libpath_sed='[
+ /Import File Strings/,/^$/ {
+ /^0/ {
+ s/^0 *\([^ ]*\) *$/\1/
+ p
+ }
+ }]'
+ _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ # Check for a 64-bit object if we didn't find anything.
+ if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
+ _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ fi],[])
+ if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
+ _LT_TAGVAR([lt_cv_aix_libpath_], [$1])="/usr/lib:/lib"
+ fi
+ ])
+ aix_libpath=$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])
+fi
+])# _LT_SYS_MODULE_PATH_AIX
-# _LT_AC_SHELL_INIT(ARG)
-# ----------------------
-AC_DEFUN([_LT_AC_SHELL_INIT],
-[ifdef([AC_DIVERSION_NOTICE],
- [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
- [AC_DIVERT_PUSH(NOTICE)])
-$1
-AC_DIVERT_POP
-])# _LT_AC_SHELL_INIT
+# _LT_SHELL_INIT(ARG)
+# -------------------
+m4_define([_LT_SHELL_INIT],
+[m4_divert_text([M4SH-INIT], [$1
+])])# _LT_SHELL_INIT
-# _LT_AC_PROG_ECHO_BACKSLASH
-# --------------------------
-# Add some code to the start of the generated configure script which
-# will find an echo command which doesn't interpret backslashes.
-AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH],
-[_LT_AC_SHELL_INIT([
-# Check that we are running under the correct shell.
-SHELL=${CONFIG_SHELL-/bin/sh}
-case X$ECHO in
-X*--fallback-echo)
- # Remove one level of quotation (which was required for Make).
- ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
- ;;
-esac
+# _LT_PROG_ECHO_BACKSLASH
+# -----------------------
+# Find how we can fake an echo command that does not interpret backslash.
+# In particular, with Autoconf 2.60 or later we add some code to the start
+# of the generated configure script which will find a shell with a builtin
+# printf (which we can use as an echo command).
+m4_defun([_LT_PROG_ECHO_BACKSLASH],
+[ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
-echo=${ECHO-echo}
-if test "X[$]1" = X--no-reexec; then
- # Discard the --no-reexec flag, and continue.
- shift
-elif test "X[$]1" = X--fallback-echo; then
- # Avoid inline document here, it may be left over
- :
-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then
- # Yippee, $echo works!
- :
+AC_MSG_CHECKING([how to print strings])
+# Test print first, because it will be a builtin if present.
+if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \
+ test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
+ ECHO='print -r --'
+elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
+ ECHO='printf %s\n'
else
- # Restart under the correct shell.
- exec $SHELL "[$]0" --no-reexec ${1+"[$]@"}
+ # Use this function as a fallback that always works.
+ func_fallback_echo ()
+ {
+ eval 'cat <<_LTECHO_EOF
+$[]1
+_LTECHO_EOF'
+ }
+ ECHO='func_fallback_echo'
fi
-if test "X[$]1" = X--fallback-echo; then
- # used as fallback echo
- shift
- cat <<EOF
-[$]*
-EOF
- exit 0
-fi
+# func_echo_all arg...
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+ $ECHO "$*"
+}
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+case "$ECHO" in
+ printf*) AC_MSG_RESULT([printf]) ;;
+ print*) AC_MSG_RESULT([print -r]) ;;
+ *) AC_MSG_RESULT([cat]) ;;
+esac
-if test -z "$ECHO"; then
-if test "X${echo_test_string+set}" != Xset; then
-# find a string as large as possible, as long as the shell can cope with it
- for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
- # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
- if (echo_test_string=`eval $cmd`) 2>/dev/null &&
- echo_test_string=`eval $cmd` &&
- (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
- then
- break
- fi
- done
-fi
+m4_ifdef([_AS_DETECT_SUGGESTED],
+[_AS_DETECT_SUGGESTED([
+ test -n "${ZSH_VERSION+set}${BASH_VERSION+set}" || (
+ ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+ ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
+ ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
+ PATH=/empty FPATH=/empty; export PATH FPATH
+ test "X`printf %s $ECHO`" = "X$ECHO" \
+ || test "X`print -r -- $ECHO`" = "X$ECHO" )])])
-if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- :
-else
- # The Solaris, AIX, and Digital Unix default echo programs unquote
- # backslashes. This makes it impossible to quote backslashes using
- # echo "$something" | sed 's/\\/\\\\/g'
- #
- # So, first we look for a working echo in the user's PATH.
+_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts])
+_LT_DECL([], [ECHO], [1], [An echo program that protects backslashes])
+])# _LT_PROG_ECHO_BACKSLASH
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
- for dir in $PATH /usr/ucb; do
- IFS="$lt_save_ifs"
- if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
- test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- echo="$dir/echo"
- break
- fi
- done
- IFS="$lt_save_ifs"
- if test "X$echo" = Xecho; then
- # We didn't find a better echo, so look for alternatives.
- if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- # This shell has a builtin print -r that does the trick.
- echo='print -r'
- elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
- test "X$CONFIG_SHELL" != X/bin/ksh; then
- # If we have ksh, try running configure again with it.
- ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
- export ORIGINAL_CONFIG_SHELL
- CONFIG_SHELL=/bin/ksh
- export CONFIG_SHELL
- exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
- else
- # Try using printf.
- echo='printf %s\n'
- if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- # Cool, printf works
- :
- elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
- test "X$echo_testing_string" = 'X\t' &&
- echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
- export CONFIG_SHELL
- SHELL="$CONFIG_SHELL"
- export SHELL
- echo="$CONFIG_SHELL [$]0 --fallback-echo"
- elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
- test "X$echo_testing_string" = 'X\t' &&
- echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- echo="$CONFIG_SHELL [$]0 --fallback-echo"
- else
- # maybe with a smaller string...
- prev=:
+# _LT_WITH_SYSROOT
+# ----------------
+AC_DEFUN([_LT_WITH_SYSROOT],
+[AC_MSG_CHECKING([for sysroot])
+AC_ARG_WITH([sysroot],
+[ --with-sysroot[=DIR] Search for dependent libraries within DIR
+ (or the compiler's sysroot if not specified).],
+[], [with_sysroot=no])
- for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
- if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
- then
- break
- fi
- prev="$cmd"
- done
+dnl lt_sysroot will always be passed unquoted. We quote it here
+dnl in case the user passed a directory name.
+lt_sysroot=
+case ${with_sysroot} in #(
+ yes)
+ if test "$GCC" = yes; then
+ lt_sysroot=`$CC --print-sysroot 2>/dev/null`
+ fi
+ ;; #(
+ /*)
+ lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"`
+ ;; #(
+ no|'')
+ ;; #(
+ *)
+ AC_MSG_RESULT([${with_sysroot}])
+ AC_MSG_ERROR([The sysroot must be an absolute path.])
+ ;;
+esac
- if test "$prev" != 'sed 50q "[$]0"'; then
- echo_test_string=`eval $prev`
- export echo_test_string
- exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
- else
- # Oops. We lost completely, so just stick with echo.
- echo=echo
- fi
- fi
- fi
- fi
-fi
-fi
+ AC_MSG_RESULT([${lt_sysroot:-no}])
+_LT_DECL([], [lt_sysroot], [0], [The root where to search for ]dnl
+[dependent libraries, and in which our libraries should be installed.])])
-# Copy echo and quote the copy suitably for passing to libtool from
-# the Makefile, instead of quoting the original, which is used later.
-ECHO=$echo
-if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
- ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
-fi
-
-AC_SUBST(ECHO)
-])])# _LT_AC_PROG_ECHO_BACKSLASH
-
-
-# _LT_AC_LOCK
-# -----------
-AC_DEFUN([_LT_AC_LOCK],
+# _LT_ENABLE_LOCK
+# ---------------
+m4_defun([_LT_ENABLE_LOCK],
[AC_ARG_ENABLE([libtool-lock],
- [AC_HELP_STRING([--disable-libtool-lock],
- [avoid locking (might break parallel builds)])])
+ [AS_HELP_STRING([--disable-libtool-lock],
+ [avoid locking (might break parallel builds)])])
test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
# Some flags need to be propagated to the compiler or linker for good
@@ -576,12 +1282,12 @@
echo 'int i;' > conftest.$ac_ext
if AC_TRY_EVAL(ac_compile); then
case `/usr/bin/file conftest.$ac_objext` in
- *ELF-32*)
- HPUX_IA64_MODE="32"
- ;;
- *ELF-64*)
- HPUX_IA64_MODE="64"
- ;;
+ *ELF-32*)
+ HPUX_IA64_MODE="32"
+ ;;
+ *ELF-64*)
+ HPUX_IA64_MODE="64"
+ ;;
esac
fi
rm -rf conftest*
@@ -588,81 +1294,81 @@
;;
*-*-irix6*)
# Find out which ABI we are using.
- echo '[#]line __oline__ "configure"' > conftest.$ac_ext
+ echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext
if AC_TRY_EVAL(ac_compile); then
- if test "$lt_cv_prog_gnu_ld" = yes; then
- case `/usr/bin/file conftest.$ac_objext` in
- *32-bit*)
- LD="${LD-ld} -melf32bsmip"
- ;;
- *N32*)
- LD="${LD-ld} -melf32bmipn32"
- ;;
- *64-bit*)
- LD="${LD-ld} -melf64bmip"
- ;;
- esac
- else
- case `/usr/bin/file conftest.$ac_objext` in
- *32-bit*)
- LD="${LD-ld} -32"
- ;;
- *N32*)
- LD="${LD-ld} -n32"
- ;;
- *64-bit*)
- LD="${LD-ld} -64"
- ;;
- esac
- fi
+ if test "$lt_cv_prog_gnu_ld" = yes; then
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ LD="${LD-ld} -melf32bsmip"
+ ;;
+ *N32*)
+ LD="${LD-ld} -melf32bmipn32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -melf64bmip"
+ ;;
+ esac
+ else
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ LD="${LD-ld} -32"
+ ;;
+ *N32*)
+ LD="${LD-ld} -n32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -64"
+ ;;
+ esac
+ fi
fi
rm -rf conftest*
;;
x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
-s390*-*linux*|sparc*-*linux*)
+s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
# Find out which ABI we are using.
echo 'int i;' > conftest.$ac_ext
if AC_TRY_EVAL(ac_compile); then
case `/usr/bin/file conftest.o` in
- *32-bit*)
- case $host in
- x86_64-*kfreebsd*-gnu)
- LD="${LD-ld} -m elf_i386_fbsd"
- ;;
- x86_64-*linux*)
- LD="${LD-ld} -m elf_i386"
- ;;
- ppc64-*linux*|powerpc64-*linux*)
- LD="${LD-ld} -m elf32ppclinux"
- ;;
- s390x-*linux*)
- LD="${LD-ld} -m elf_s390"
- ;;
- sparc64-*linux*)
- LD="${LD-ld} -m elf32_sparc"
- ;;
- esac
- ;;
- *64-bit*)
- case $host in
- x86_64-*kfreebsd*-gnu)
- LD="${LD-ld} -m elf_x86_64_fbsd"
- ;;
- x86_64-*linux*)
- LD="${LD-ld} -m elf_x86_64"
- ;;
- ppc*-*linux*|powerpc*-*linux*)
- LD="${LD-ld} -m elf64ppc"
- ;;
- s390*-*linux*)
- LD="${LD-ld} -m elf64_s390"
- ;;
- sparc*-*linux*)
- LD="${LD-ld} -m elf64_sparc"
- ;;
- esac
- ;;
+ *32-bit*)
+ case $host in
+ x86_64-*kfreebsd*-gnu)
+ LD="${LD-ld} -m elf_i386_fbsd"
+ ;;
+ x86_64-*linux*)
+ LD="${LD-ld} -m elf_i386"
+ ;;
+ ppc64-*linux*|powerpc64-*linux*)
+ LD="${LD-ld} -m elf32ppclinux"
+ ;;
+ s390x-*linux*)
+ LD="${LD-ld} -m elf_s390"
+ ;;
+ sparc64-*linux*)
+ LD="${LD-ld} -m elf32_sparc"
+ ;;
+ esac
+ ;;
+ *64-bit*)
+ case $host in
+ x86_64-*kfreebsd*-gnu)
+ LD="${LD-ld} -m elf_x86_64_fbsd"
+ ;;
+ x86_64-*linux*)
+ LD="${LD-ld} -m elf_x86_64"
+ ;;
+ ppc*-*linux*|powerpc*-*linux*)
+ LD="${LD-ld} -m elf64ppc"
+ ;;
+ s390*-*linux*|s390*-*tpf*)
+ LD="${LD-ld} -m elf64_s390"
+ ;;
+ sparc*-*linux*)
+ LD="${LD-ld} -m elf64_sparc"
+ ;;
+ esac
+ ;;
esac
fi
rm -rf conftest*
@@ -674,7 +1380,7 @@
CFLAGS="$CFLAGS -belf"
AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
[AC_LANG_PUSH(C)
- AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
+ AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
AC_LANG_POP])
if test x"$lt_cv_cc_needs_belf" != x"yes"; then
# this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
@@ -681,7 +1387,7 @@
CFLAGS="$SAVE_CFLAGS"
fi
;;
-sparc*-*solaris*)
+*-*solaris*)
# Find out which ABI we are using.
echo 'int i;' > conftest.$ac_ext
if AC_TRY_EVAL(ac_compile); then
@@ -688,9 +1394,22 @@
case `/usr/bin/file conftest.o` in
*64-bit*)
case $lt_cv_prog_gnu_ld in
- yes*) LD="${LD-ld} -m elf64_sparc" ;;
+ yes*)
+ case $host in
+ i?86-*-solaris*)
+ LD="${LD-ld} -m elf_x86_64"
+ ;;
+ sparc*-*-solaris*)
+ LD="${LD-ld} -m elf64_sparc"
+ ;;
+ esac
+ # GNU ld 2.21 introduced _sol2 emulations. Use them if available.
+ if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then
+ LD="${LD-ld}_sol2"
+ fi
+ ;;
*)
- if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
+ if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
LD="${LD-ld} -64"
fi
;;
@@ -700,30 +1419,105 @@
fi
rm -rf conftest*
;;
-
-AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
-[*-*-cygwin* | *-*-mingw* | *-*-pw32*)
- AC_CHECK_TOOL(DLLTOOL, dlltool, false)
- AC_CHECK_TOOL(AS, as, false)
- AC_CHECK_TOOL(OBJDUMP, objdump, false)
- ;;
- ])
esac
need_locks="$enable_libtool_lock"
+])# _LT_ENABLE_LOCK
-])# _LT_AC_LOCK
+# _LT_PROG_AR
+# -----------
+m4_defun([_LT_PROG_AR],
+[AC_CHECK_TOOLS(AR, [ar], false)
+: ${AR=ar}
+: ${AR_FLAGS=cru}
+_LT_DECL([], [AR], [1], [The archiver])
+_LT_DECL([], [AR_FLAGS], [1], [Flags to create an archive])
-# AC_LIBTOOL_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
+AC_CACHE_CHECK([for archiver @FILE support], [lt_cv_ar_at_file],
+ [lt_cv_ar_at_file=no
+ AC_COMPILE_IFELSE([AC_LANG_PROGRAM],
+ [echo conftest.$ac_objext > conftest.lst
+ lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&AS_MESSAGE_LOG_FD'
+ AC_TRY_EVAL([lt_ar_try])
+ if test "$ac_status" -eq 0; then
+ # Ensure the archiver fails upon bogus file names.
+ rm -f conftest.$ac_objext libconftest.a
+ AC_TRY_EVAL([lt_ar_try])
+ if test "$ac_status" -ne 0; then
+ lt_cv_ar_at_file=@
+ fi
+ fi
+ rm -f conftest.* libconftest.a
+ ])
+ ])
+
+if test "x$lt_cv_ar_at_file" = xno; then
+ archiver_list_spec=
+else
+ archiver_list_spec=$lt_cv_ar_at_file
+fi
+_LT_DECL([], [archiver_list_spec], [1],
+ [How to feed a file listing to the archiver])
+])# _LT_PROG_AR
+
+
+# _LT_CMD_OLD_ARCHIVE
+# -------------------
+m4_defun([_LT_CMD_OLD_ARCHIVE],
+[_LT_PROG_AR
+
+AC_CHECK_TOOL(STRIP, strip, :)
+test -z "$STRIP" && STRIP=:
+_LT_DECL([], [STRIP], [1], [A symbol stripping program])
+
+AC_CHECK_TOOL(RANLIB, ranlib, :)
+test -z "$RANLIB" && RANLIB=:
+_LT_DECL([], [RANLIB], [1],
+ [Commands used to install an old-style archive])
+
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
+
+if test -n "$RANLIB"; then
+ case $host_os in
+ openbsd*)
+ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib"
+ ;;
+ *)
+ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib"
+ ;;
+ esac
+ old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib"
+fi
+
+case $host_os in
+ darwin*)
+ lock_old_archive_extraction=yes ;;
+ *)
+ lock_old_archive_extraction=no ;;
+esac
+_LT_DECL([], [old_postinstall_cmds], [2])
+_LT_DECL([], [old_postuninstall_cmds], [2])
+_LT_TAGDECL([], [old_archive_cmds], [2],
+ [Commands used to build an old-style archive])
+_LT_DECL([], [lock_old_archive_extraction], [0],
+ [Whether to use a lock for old archive extraction])
+])# _LT_CMD_OLD_ARCHIVE
+
+
+# _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
# ----------------------------------------------------------------
# Check whether the given compiler option works
-AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION],
-[AC_REQUIRE([LT_AC_PROG_SED])
+AC_DEFUN([_LT_COMPILER_OPTION],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_SED])dnl
AC_CACHE_CHECK([$1], [$2],
[$2=no
- ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
+ m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
echo "$lt_simple_compile_test_code" > conftest.$ac_ext
lt_compiler_flag="$3"
# Insert the option either (1) after the last *FLAGS variable, or
@@ -735,37 +1529,43 @@
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&AS_MESSAGE_LOG_FD
- echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+ echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings other than the usual output.
- $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
$SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
$2=yes
fi
fi
- $rm conftest*
+ $RM conftest*
])
if test x"[$]$2" = xyes; then
- ifelse([$5], , :, [$5])
+ m4_if([$5], , :, [$5])
else
- ifelse([$6], , :, [$6])
+ m4_if([$6], , :, [$6])
fi
-])# AC_LIBTOOL_COMPILER_OPTION
+])# _LT_COMPILER_OPTION
+# Old name:
+AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], [])
-# AC_LIBTOOL_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
-# [ACTION-SUCCESS], [ACTION-FAILURE])
-# ------------------------------------------------------------
-# Check whether the given compiler option works
-AC_DEFUN([AC_LIBTOOL_LINKER_OPTION],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
+
+# _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
+# [ACTION-SUCCESS], [ACTION-FAILURE])
+# ----------------------------------------------------
+# Check whether the given linker option works
+AC_DEFUN([_LT_LINKER_OPTION],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_SED])dnl
AC_CACHE_CHECK([$1], [$2],
[$2=no
save_LDFLAGS="$LDFLAGS"
@@ -777,7 +1577,7 @@
if test -s conftest.err; then
# Append any errors to the config.log.
cat conftest.err 1>&AS_MESSAGE_LOG_FD
- $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
+ $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
$SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
if diff conftest.exp conftest.er2 >/dev/null; then
$2=yes
@@ -786,22 +1586,28 @@
$2=yes
fi
fi
- $rm -r conftest*
+ $RM -r conftest*
LDFLAGS="$save_LDFLAGS"
])
if test x"[$]$2" = xyes; then
- ifelse([$4], , :, [$4])
+ m4_if([$4], , :, [$4])
else
- ifelse([$5], , :, [$5])
+ m4_if([$5], , :, [$5])
fi
-])# AC_LIBTOOL_LINKER_OPTION
+])# _LT_LINKER_OPTION
+# Old name:
+AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], [])
-# AC_LIBTOOL_SYS_MAX_CMD_LEN
-# --------------------------
-AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN],
-[# find the maximum length of command line arguments
+
+# LT_CMD_MAX_LEN
+#---------------
+AC_DEFUN([LT_CMD_MAX_LEN],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+# find the maximum length of command line arguments
AC_MSG_CHECKING([the maximum length of command line arguments])
AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
i=0
@@ -823,7 +1629,7 @@
lt_cv_sys_max_cmd_len=-1;
;;
- cygwin* | mingw*)
+ cygwin* | mingw* | cegcc*)
# On Win9x/ME, this test blows up -- it succeeds, but takes
# about 5 minutes as the teststring grows exponentially.
# Worse, since 9x/ME are not pre-emptively multitasking,
@@ -834,6 +1640,11 @@
lt_cv_sys_max_cmd_len=8192;
;;
+ mint*)
+ # On MiNT this can take a long time and run out of memory.
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
+
amigaos*)
# On AmigaOS with pdksh, this test takes hours, literally.
# So we just punt and use a minimum line length of 8192.
@@ -859,6 +1670,11 @@
lt_cv_sys_max_cmd_len=196608
;;
+ os2*)
+ # The test takes a long time on OS/2.
+ lt_cv_sys_max_cmd_len=8192
+ ;;
+
osf*)
# Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
# due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
@@ -878,7 +1694,7 @@
sysv5* | sco5v6* | sysv4.2uw2*)
kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
if test -n "$kargmax"; then
- lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'`
+ lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'`
else
lt_cv_sys_max_cmd_len=32768
fi
@@ -889,20 +1705,28 @@
lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
else
+ # Make teststring a little bigger before we do anything with it.
+ # a 1K string should be a reasonable start.
+ for i in 1 2 3 4 5 6 7 8 ; do
+ teststring=$teststring$teststring
+ done
SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
- while (test "X"`$SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \
- = "XX$teststring") >/dev/null 2>&1 &&
- new_result=`expr "X$teststring" : ".*" 2>&1` &&
- lt_cv_sys_max_cmd_len=$new_result &&
+ # If test is not a shell built-in, we'll probably end up computing a
+ # maximum length that is only half of the actual maximum length, but
+ # we can't tell.
+ while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \
+ = "X$teststring$teststring"; } >/dev/null 2>&1 &&
test $i != 17 # 1/2 MB should be enough
do
i=`expr $i + 1`
teststring=$teststring$teststring
done
+ # Only check the string length outside the loop.
+ lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
teststring=
- # Add a significant safety factor because C++ compilers can tack on massive
- # amounts of additional arguments before passing them to the linker.
- # It appears as though 1/2 is a usable value.
+ # Add a significant safety factor because C++ compilers can tack on
+ # massive amounts of additional arguments before passing them to the
+ # linker. It appears as though 1/2 is a usable value.
lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
fi
;;
@@ -913,28 +1737,36 @@
else
AC_MSG_RESULT(none)
fi
-])# AC_LIBTOOL_SYS_MAX_CMD_LEN
+max_cmd_len=$lt_cv_sys_max_cmd_len
+_LT_DECL([], [max_cmd_len], [0],
+ [What is the maximum length of a command?])
+])# LT_CMD_MAX_LEN
+# Old name:
+AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], [])
-# _LT_AC_CHECK_DLFCN
-# ------------------
-AC_DEFUN([_LT_AC_CHECK_DLFCN],
-[AC_CHECK_HEADERS(dlfcn.h)dnl
-])# _LT_AC_CHECK_DLFCN
+# _LT_HEADER_DLFCN
+# ----------------
+m4_defun([_LT_HEADER_DLFCN],
+[AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl
+])# _LT_HEADER_DLFCN
-# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
-# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
-# ---------------------------------------------------------------------
-AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF],
-[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
+
+# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
+# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
+# ----------------------------------------------------------------
+m4_defun([_LT_TRY_DLOPEN_SELF],
+[m4_require([_LT_HEADER_DLFCN])dnl
if test "$cross_compiling" = yes; then :
[$4]
else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
- cat > conftest.$ac_ext <<EOF
-[#line __oline__ "configure"
+ cat > conftest.$ac_ext <<_LT_EOF
+[#line $LINENO "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -975,11 +1807,13 @@
# endif
#endif
-#ifdef __cplusplus
-extern "C" void exit (int);
+/* When -fvisbility=hidden is used, assume the code has been annotated
+ correspondingly for the symbols needed. */
+#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+int fnord () __attribute__((visibility("default")));
#endif
-void fnord() { int i=42;}
+int fnord () { return 42; }
int main ()
{
void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
@@ -988,15 +1822,19 @@
if (self)
{
if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
- else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+ else
+ {
+ if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+ else puts (dlerror ());
+ }
/* dlclose (self); */
}
else
puts (dlerror ());
- exit (status);
+ return status;
}]
-EOF
+_LT_EOF
if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
(./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
lt_status=$?
@@ -1011,13 +1849,13 @@
fi
fi
rm -fr conftest*
-])# _LT_AC_TRY_DLOPEN_SELF
+])# _LT_TRY_DLOPEN_SELF
-# AC_LIBTOOL_DLOPEN_SELF
-# ----------------------
-AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF],
-[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
+# LT_SYS_DLOPEN_SELF
+# ------------------
+AC_DEFUN([LT_SYS_DLOPEN_SELF],
+[m4_require([_LT_HEADER_DLFCN])dnl
if test "x$enable_dlopen" != xyes; then
enable_dlopen=unknown
enable_dlopen_self=unknown
@@ -1033,15 +1871,15 @@
lt_cv_dlopen_self=yes
;;
- mingw* | pw32*)
+ mingw* | pw32* | cegcc*)
lt_cv_dlopen="LoadLibrary"
lt_cv_dlopen_libs=
- ;;
+ ;;
cygwin*)
lt_cv_dlopen="dlopen"
lt_cv_dlopen_libs=
- ;;
+ ;;
darwin*)
# if libdl is installed we need to link against it
@@ -1051,7 +1889,7 @@
lt_cv_dlopen_libs=
lt_cv_dlopen_self=yes
])
- ;;
+ ;;
*)
AC_CHECK_FUNC([shl_load],
@@ -1093,7 +1931,7 @@
AC_CACHE_CHECK([whether a program can dlopen itself],
lt_cv_dlopen_self, [dnl
- _LT_AC_TRY_DLOPEN_SELF(
+ _LT_TRY_DLOPEN_SELF(
lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
])
@@ -1101,8 +1939,8 @@
if test "x$lt_cv_dlopen_self" = xyes; then
wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
- lt_cv_dlopen_self_static, [dnl
- _LT_AC_TRY_DLOPEN_SELF(
+ lt_cv_dlopen_self_static, [dnl
+ _LT_TRY_DLOPEN_SELF(
lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross)
])
@@ -1124,19 +1962,32 @@
*) enable_dlopen_self_static=unknown ;;
esac
fi
-])# AC_LIBTOOL_DLOPEN_SELF
+_LT_DECL([dlopen_support], [enable_dlopen], [0],
+ [Whether dlopen is supported])
+_LT_DECL([dlopen_self], [enable_dlopen_self], [0],
+ [Whether dlopen of programs is supported])
+_LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0],
+ [Whether dlopen of statically linked programs is supported])
+])# LT_SYS_DLOPEN_SELF
+# Old name:
+AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], [])
-# AC_LIBTOOL_PROG_CC_C_O([TAGNAME])
-# ---------------------------------
-# Check to see if options -c and -o are simultaneously supported by compiler
-AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
-AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
+
+# _LT_COMPILER_C_O([TAGNAME])
+# ---------------------------
+# Check to see if options -c and -o are simultaneously supported by compiler.
+# This macro does not hard code the compiler like AC_PROG_CC_C_O.
+m4_defun([_LT_COMPILER_C_O],
+[m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_TAG_COMPILER])dnl
AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
- [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
- [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
- $rm -r conftest 2>/dev/null
+ [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
+ [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
+ $RM -r conftest 2>/dev/null
mkdir conftest
cd conftest
mkdir out
@@ -1151,46 +2002,50 @@
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
(eval "$lt_compile" 2>out/conftest.err)
ac_status=$?
cat out/conftest.err >&AS_MESSAGE_LOG_FD
- echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+ echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
if (exit $ac_status) && test -s out/conftest2.$ac_objext
then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings
- $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
$SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
- _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
+ _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
fi
fi
chmod u+w . 2>&AS_MESSAGE_LOG_FD
- $rm conftest*
+ $RM conftest*
# SGI C++ compiler will create directory out/ii_files/ for
# template instantiation
- test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
- $rm out/* && rmdir out
+ test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+ $RM out/* && rmdir out
cd ..
- rmdir conftest
- $rm conftest*
+ $RM -r conftest
+ $RM conftest*
])
-])# AC_LIBTOOL_PROG_CC_C_O
+_LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1],
+ [Does compiler simultaneously support -c and -o options?])
+])# _LT_COMPILER_C_O
-# AC_LIBTOOL_SYS_HARD_LINK_LOCKS([TAGNAME])
-# -----------------------------------------
+# _LT_COMPILER_FILE_LOCKS([TAGNAME])
+# ----------------------------------
# Check to see if we can do hard links to lock some files if needed
-AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS],
-[AC_REQUIRE([_LT_AC_LOCK])dnl
+m4_defun([_LT_COMPILER_FILE_LOCKS],
+[m4_require([_LT_ENABLE_LOCK])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+_LT_COMPILER_C_O([$1])
hard_links="nottested"
-if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
+if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
# do not overwrite the value of need_locks provided by the user
AC_MSG_CHECKING([if we can lock with hard links])
hard_links=yes
- $rm conftest*
+ $RM conftest*
ln conftest.a conftest.b 2>/dev/null && hard_links=no
touch conftest.a
ln conftest.a conftest.b 2>&5 || hard_links=no
@@ -1203,12 +2058,13 @@
else
need_locks=no
fi
-])# AC_LIBTOOL_SYS_HARD_LINK_LOCKS
+_LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?])
+])# _LT_COMPILER_FILE_LOCKS
-# AC_LIBTOOL_OBJDIR
-# -----------------
-AC_DEFUN([AC_LIBTOOL_OBJDIR],
+# _LT_CHECK_OBJDIR
+# ----------------
+m4_defun([_LT_CHECK_OBJDIR],
[AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
[rm -f .libs 2>/dev/null
mkdir .libs 2>/dev/null
@@ -1220,40 +2076,46 @@
fi
rmdir .libs 2>/dev/null])
objdir=$lt_cv_objdir
-])# AC_LIBTOOL_OBJDIR
+_LT_DECL([], [objdir], [0],
+ [The name of the directory that contains temporary libtool files])dnl
+m4_pattern_allow([LT_OBJDIR])dnl
+AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/",
+ [Define to the sub-directory in which libtool stores uninstalled libraries.])
+])# _LT_CHECK_OBJDIR
-# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([TAGNAME])
-# ----------------------------------------------
+# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME])
+# --------------------------------------
# Check hardcoding attributes.
-AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH],
+m4_defun([_LT_LINKER_HARDCODE_LIBPATH],
[AC_MSG_CHECKING([how to hardcode library paths into programs])
-_LT_AC_TAGVAR(hardcode_action, $1)=
-if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \
- test -n "$_LT_AC_TAGVAR(runpath_var, $1)" || \
- test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then
+_LT_TAGVAR(hardcode_action, $1)=
+if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" ||
+ test -n "$_LT_TAGVAR(runpath_var, $1)" ||
+ test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then
- # We can hardcode non-existant directories.
- if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no &&
+ # We can hardcode non-existent directories.
+ if test "$_LT_TAGVAR(hardcode_direct, $1)" != no &&
# If the only mechanism to avoid hardcoding is shlibpath_var, we
# have to relink, otherwise we might link with an installed library
# when we should be linking with a yet-to-be-installed one
- ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
- test "$_LT_AC_TAGVAR(hardcode_minus_L, $1)" != no; then
+ ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
+ test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then
# Linking always hardcodes the temporary library directory.
- _LT_AC_TAGVAR(hardcode_action, $1)=relink
+ _LT_TAGVAR(hardcode_action, $1)=relink
else
# We can link without hardcoding, and we can hardcode nonexisting dirs.
- _LT_AC_TAGVAR(hardcode_action, $1)=immediate
+ _LT_TAGVAR(hardcode_action, $1)=immediate
fi
else
# We cannot hardcode anything, or else we can only hardcode existing
# directories.
- _LT_AC_TAGVAR(hardcode_action, $1)=unsupported
+ _LT_TAGVAR(hardcode_action, $1)=unsupported
fi
-AC_MSG_RESULT([$_LT_AC_TAGVAR(hardcode_action, $1)])
+AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)])
-if test "$_LT_AC_TAGVAR(hardcode_action, $1)" = relink; then
+if test "$_LT_TAGVAR(hardcode_action, $1)" = relink ||
+ test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then
# Fast installation is not supported
enable_fast_install=no
elif test "$shlibpath_overrides_runpath" = yes ||
@@ -1261,16 +2123,19 @@
# Fast installation is not necessary
enable_fast_install=needless
fi
-])# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH
+_LT_TAGDECL([], [hardcode_action], [0],
+ [How to hardcode a shared library path into an executable])
+])# _LT_LINKER_HARDCODE_LIBPATH
-# AC_LIBTOOL_SYS_LIB_STRIP
-# ------------------------
-AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP],
-[striplib=
+# _LT_CMD_STRIPLIB
+# ----------------
+m4_defun([_LT_CMD_STRIPLIB],
+[m4_require([_LT_DECL_EGREP])
+striplib=
old_striplib=
AC_MSG_CHECKING([whether stripping libraries is possible])
-if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
+if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
test -z "$striplib" && striplib="$STRIP --strip-unneeded"
AC_MSG_RESULT([yes])
@@ -1277,58 +2142,60 @@
else
# FIXME - insert some real tests, host_os isn't really good enough
case $host_os in
- darwin*)
- if test -n "$STRIP" ; then
- striplib="$STRIP -x"
- old_striplib="$STRIP -S"
- AC_MSG_RESULT([yes])
- else
- AC_MSG_RESULT([no])
-fi
- ;;
- *)
- AC_MSG_RESULT([no])
+ darwin*)
+ if test -n "$STRIP" ; then
+ striplib="$STRIP -x"
+ old_striplib="$STRIP -S"
+ AC_MSG_RESULT([yes])
+ else
+ AC_MSG_RESULT([no])
+ fi
;;
+ *)
+ AC_MSG_RESULT([no])
+ ;;
esac
fi
-])# AC_LIBTOOL_SYS_LIB_STRIP
+_LT_DECL([], [old_striplib], [1], [Commands to strip libraries])
+_LT_DECL([], [striplib], [1])
+])# _LT_CMD_STRIPLIB
-# AC_LIBTOOL_SYS_DYNAMIC_LINKER
+# _LT_SYS_DYNAMIC_LINKER([TAG])
# -----------------------------
# PORTME Fill in your ld.so characteristics
-AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
+m4_defun([_LT_SYS_DYNAMIC_LINKER],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_OBJDUMP])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_CHECK_SHELL_FEATURES])dnl
AC_MSG_CHECKING([dynamic linker characteristics])
-library_names_spec=
-libname_spec='lib$name'
-soname_spec=
-shrext_cmds=".so"
-postinstall_cmds=
-postuninstall_cmds=
-finish_cmds=
-finish_eval=
-shlibpath_var=
-shlibpath_overrides_runpath=unknown
-version_type=none
-dynamic_linker="$host_os ld.so"
-sys_lib_dlsearch_path_spec="/lib /usr/lib"
-m4_if($1,[],[
+m4_if([$1],
+ [], [
if test "$GCC" = yes; then
case $host_os in
darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
*) lt_awk_arg="/^libraries:/" ;;
esac
- lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
- if echo "$lt_search_path_spec" | grep ';' >/dev/null ; then
+ case $host_os in
+ mingw* | cegcc*) lt_sed_strip_eq="s,=\([[A-Za-z]]:\),\1,g" ;;
+ *) lt_sed_strip_eq="s,=/,/,g" ;;
+ esac
+ lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
+ case $lt_search_path_spec in
+ *\;*)
# if the path contains ";" then we assume it to be the separator
# otherwise default to the standard path separator (i.e. ":") - it is
# assumed that no part of a normal pathname contains ";" but that should
# okay in the real world where ";" in dirpaths is itself problematic.
- lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e 's/;/ /g'`
- else
- lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
- fi
+ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'`
+ ;;
+ *)
+ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"`
+ ;;
+ esac
# Ok, now we have the path, separated by spaces, we can step through it
# and add multilib dir if necessary.
lt_tmp_lt_search_path_spec=
@@ -1341,7 +2208,7 @@
lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
fi
done
- lt_search_path_spec=`echo $lt_tmp_lt_search_path_spec | awk '
+ lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
BEGIN {RS=" "; FS="/|\n";} {
lt_foo="";
lt_count=0;
@@ -1361,10 +2228,29 @@
if (lt_foo != "") { lt_freq[[lt_foo]]++; }
if (lt_freq[[lt_foo]] == 1) { print lt_foo; }
}'`
- sys_lib_search_path_spec=`echo $lt_search_path_spec`
+ # AWK program above erroneously prepends '/' to C:/dos/paths
+ # for these hosts.
+ case $host_os in
+ mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
+ $SED 's,/\([[A-Za-z]]:\),\1,g'` ;;
+ esac
+ sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
else
sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
fi])
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=".so"
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
need_lib_prefix=unknown
hardcode_into_libs=no
@@ -1374,7 +2260,7 @@
case $host_os in
aix3*)
- version_type=linux
+ version_type=linux # correct to gnu/linux during the next big refactor
library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
shlibpath_var=LIBPATH
@@ -1383,7 +2269,7 @@
;;
aix[[4-9]]*)
- version_type=linux
+ version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
hardcode_into_libs=yes
@@ -1401,7 +2287,7 @@
aix4 | aix4.[[01]] | aix4.[[01]].*)
if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
echo ' yes '
- echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
+ echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
:
else
can_build_shared=no
@@ -1427,9 +2313,18 @@
;;
amigaos*)
- library_names_spec='$libname.ixlibrary $libname.a'
- # Create ${libname}_ixlibrary.a entries in /sys/libs.
- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+ case $host_cpu in
+ powerpc)
+ # Since July 2007 AmigaOS4 officially supports .so libraries.
+ # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ ;;
+ m68k)
+ library_names_spec='$libname.ixlibrary $libname.a'
+ # Create ${libname}_ixlibrary.a entries in /sys/libs.
+ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+ ;;
+ esac
;;
beos*)
@@ -1439,7 +2334,7 @@
;;
bsdi[[45]]*)
- version_type=linux
+ version_type=linux # correct to gnu/linux during the next big refactor
need_version=no
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
@@ -1452,25 +2347,29 @@
# libtool to hard-code these into programs
;;
-cygwin* | mingw* | pw32*)
+cygwin* | mingw* | pw32* | cegcc*)
version_type=windows
shrext_cmds=".dll"
need_version=no
need_lib_prefix=no
- case $GCC,$host_os in
- yes,cygwin* | yes,mingw* | yes,pw32*)
+ case $GCC,$cc_basename in
+ yes,*)
+ # gcc
library_names_spec='$libname.dll.a'
# DLL is installed to $(libdir)/../bin by postinstall_cmds
postinstall_cmds='base_file=`basename \${file}`~
- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
dldir=$destdir/`dirname \$dlpath`~
test -d \$dldir || mkdir -p \$dldir~
$install_prog $dir/$dlname \$dldir/$dlname~
- chmod a+x \$dldir/$dlname'
+ chmod a+x \$dldir/$dlname~
+ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+ eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+ fi'
postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
dlpath=$dir/\$dldll~
- $rm \$dlpath'
+ $RM \$dlpath'
shlibpath_overrides_runpath=yes
case $host_os in
@@ -1477,23 +2376,12 @@
cygwin*)
# Cygwin DLLs use 'cyg' prefix rather than 'lib'
soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
- sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
+m4_if([$1], [],[
+ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"])
;;
- mingw*)
+ mingw* | cegcc*)
# MinGW DLLs use traditional 'lib' prefix
soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
- if echo "$sys_lib_search_path_spec" | [grep ';[c-zC-Z]:/' >/dev/null]; then
- # It is most probably a Windows format PATH printed by
- # mingw gcc, but we are running on Cygwin. Gcc prints its search
- # path with ; separators, and with drive letters. We can handle the
- # drive letters (cygwin fileutils understands them), so leave them,
- # especially as we might pass files found there to a mingw objdump,
- # which wouldn't understand a cygwinified path. Ahh.
- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
- else
- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
- fi
;;
pw32*)
# pw32 DLLs use 'pw' prefix rather than 'lib'
@@ -1500,13 +2388,71 @@
library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
;;
esac
+ dynamic_linker='Win32 ld.exe'
;;
+ *,cl*)
+ # Native MSVC
+ libname_spec='$name'
+ soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+ library_names_spec='${libname}.dll.lib'
+
+ case $build_os in
+ mingw*)
+ sys_lib_search_path_spec=
+ lt_save_ifs=$IFS
+ IFS=';'
+ for lt_path in $LIB
+ do
+ IFS=$lt_save_ifs
+ # Let DOS variable expansion print the short 8.3 style file name.
+ lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
+ sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
+ done
+ IFS=$lt_save_ifs
+ # Convert to MSYS style.
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([[a-zA-Z]]\\):| /\\1|g' -e 's|^ ||'`
+ ;;
+ cygwin*)
+ # Convert to unix form, then to dos form, then back to unix form
+ # but this time dos style (no spaces!) so that the unix form looks
+ # like /cygdrive/c/PROGRA~1:/cygdr...
+ sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
+ sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
+ sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+ ;;
+ *)
+ sys_lib_search_path_spec="$LIB"
+ if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then
+ # It is most probably a Windows format PATH.
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+ else
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+ fi
+ # FIXME: find the short name or the path components, as spaces are
+ # common. (e.g. "Program Files" -> "PROGRA~1")
+ ;;
+ esac
+
+ # DLL is installed to $(libdir)/../bin by postinstall_cmds
+ postinstall_cmds='base_file=`basename \${file}`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+ dldir=$destdir/`dirname \$dlpath`~
+ test -d \$dldir || mkdir -p \$dldir~
+ $install_prog $dir/$dlname \$dldir/$dlname'
+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+ dlpath=$dir/\$dldll~
+ $RM \$dlpath'
+ shlibpath_overrides_runpath=yes
+ dynamic_linker='Win32 link.exe'
+ ;;
+
*)
+ # Assume MSVC wrapper
library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
+ dynamic_linker='Win32 ld.exe'
;;
esac
- dynamic_linker='Win32 ld.exe'
# FIXME: first we should search . and the directory the executable is in
shlibpath_var=PATH
;;
@@ -1516,18 +2462,18 @@
version_type=darwin
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+ library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
soname_spec='${libname}${release}${major}$shared_ext'
shlibpath_overrides_runpath=yes
shlibpath_var=DYLD_LIBRARY_PATH
shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
- m4_if([$1], [],[
- sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"])
+m4_if([$1], [],[
+ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"])
sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
;;
dgux*)
- version_type=linux
+ version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
@@ -1535,10 +2481,6 @@
shlibpath_var=LD_LIBRARY_PATH
;;
-freebsd1*)
- dynamic_linker=no
- ;;
-
freebsd* | dragonfly*)
# DragonFly does not have aout. When/if they implement a new
# versioning mechanism, adjust this.
@@ -1546,7 +2488,7 @@
objformat=`/usr/bin/objformat`
else
case $host_os in
- freebsd[[123]]*) objformat=aout ;;
+ freebsd[[23]].*) objformat=aout ;;
*) objformat=elf ;;
esac
fi
@@ -1564,7 +2506,7 @@
esac
shlibpath_var=LD_LIBRARY_PATH
case $host_os in
- freebsd2*)
+ freebsd2.*)
shlibpath_overrides_runpath=yes
;;
freebsd3.[[01]]* | freebsdelf3.[[01]]*)
@@ -1584,15 +2526,29 @@
;;
gnu*)
- version_type=linux
+ version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
hardcode_into_libs=yes
;;
+haiku*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ dynamic_linker="$host_os runtime_loader"
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
+ hardcode_into_libs=yes
+ ;;
+
hpux9* | hpux10* | hpux11*)
# Give a soname corresponding to the major version so that dld.sl refuses to
# link against other versions.
@@ -1615,20 +2571,20 @@
fi
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
- hppa*64*)
- shrext_cmds='.sl'
- hardcode_into_libs=yes
- dynamic_linker="$host_os dld.sl"
- shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
- ;;
- *)
+ hppa*64*)
shrext_cmds='.sl'
+ hardcode_into_libs=yes
dynamic_linker="$host_os dld.sl"
+ shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ ;;
+ *)
+ shrext_cmds='.sl'
+ dynamic_linker="$host_os dld.sl"
shlibpath_var=SHLIB_PATH
shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
@@ -1635,12 +2591,14 @@
soname_spec='${libname}${release}${shared_ext}$major'
;;
esac
- # HP-UX runs *really* slowly unless shared libraries are mode 555.
+ # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
postinstall_cmds='chmod 555 $lib'
+ # or fails outright, so override atomically:
+ install_override_mode=555
;;
interix[[3-9]]*)
- version_type=linux
+ version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
@@ -1656,7 +2614,7 @@
nonstopux*) version_type=nonstopux ;;
*)
if test "$lt_cv_prog_gnu_ld" = yes; then
- version_type=linux
+ version_type=linux # correct to gnu/linux during the next big refactor
else
version_type=irix
fi ;;
@@ -1693,9 +2651,9 @@
dynamic_linker=no
;;
-# This must be Linux ELF.
-linux* | k*bsd*-gnu)
- version_type=linux
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
@@ -1703,6 +2661,22 @@
finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
+
+ # Some binutils ld are patched to set DT_RUNPATH
+ AC_CACHE_VAL([lt_cv_shlibpath_overrides_runpath],
+ [lt_cv_shlibpath_overrides_runpath=no
+ save_LDFLAGS=$LDFLAGS
+ save_libdir=$libdir
+ eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \
+ LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\""
+ AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
+ [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null],
+ [lt_cv_shlibpath_overrides_runpath=yes])])
+ LDFLAGS=$save_LDFLAGS
+ libdir=$save_libdir
+ ])
+ shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
+
# This implies no fast_install, which is unacceptable.
# Some rework will be needed to allow for fast_install
# before this can be enabled.
@@ -1710,7 +2684,7 @@
# Append ld.so.conf contents to the search path
if test -f /etc/ld.so.conf; then
- lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
fi
@@ -1727,7 +2701,7 @@
version_type=sunos
need_lib_prefix=no
need_version=no
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
dynamic_linker='NetBSD (a.out) ld.so'
@@ -1742,20 +2716,22 @@
;;
newsos6)
- version_type=linux
+ version_type=linux # correct to gnu/linux during the next big refactor
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
;;
-nto-qnx*)
- version_type=linux
+*nto* | *qnx*)
+ version_type=qnx
need_lib_prefix=no
need_version=no
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ dynamic_linker='ldqnx.so'
;;
openbsd*)
@@ -1764,13 +2740,13 @@
need_lib_prefix=no
# Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
case $host_os in
- openbsd3.3 | openbsd3.3.*) need_version=yes ;;
- *) need_version=no ;;
+ openbsd3.3 | openbsd3.3.*) need_version=yes ;;
+ *) need_version=no ;;
esac
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
shlibpath_var=LD_LIBRARY_PATH
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
case $host_os in
openbsd2.[[89]] | openbsd2.[[89]].*)
shlibpath_overrides_runpath=no
@@ -1809,7 +2785,7 @@
;;
solaris*)
- version_type=linux
+ version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
@@ -1834,7 +2810,7 @@
;;
sysv4 | sysv4.3*)
- version_type=linux
+ version_type=linux # correct to gnu/linux during the next big refactor
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
shlibpath_var=LD_LIBRARY_PATH
@@ -1842,7 +2818,6 @@
sni)
shlibpath_overrides_runpath=no
need_lib_prefix=no
- export_dynamic_flag_spec='${wl}-Blargedynsym'
runpath_var=LD_RUN_PATH
;;
siemens)
@@ -1859,7 +2834,7 @@
sysv4*MP*)
if test -d /usr/nec ;then
- version_type=linux
+ version_type=linux # correct to gnu/linux during the next big refactor
library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
soname_spec='$libname${shared_ext}.$major'
shlibpath_var=LD_LIBRARY_PATH
@@ -1873,13 +2848,12 @@
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
if test "$with_gnu_ld" = yes; then
sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
- shlibpath_overrides_runpath=no
else
sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
- shlibpath_overrides_runpath=yes
case $host_os in
sco3.2v5*)
sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
@@ -1889,8 +2863,19 @@
sys_lib_dlsearch_path_spec='/usr/lib'
;;
+tpf*)
+ # TPF is a cross-target only. Preferred cross-host = GNU/Linux.
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+
uts4*)
- version_type=linux
+ version_type=linux # correct to gnu/linux during the next big refactor
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
shlibpath_var=LD_LIBRARY_PATH
@@ -1903,288 +2888,60 @@
AC_MSG_RESULT([$dynamic_linker])
test "$dynamic_linker" = no && can_build_shared=no
-AC_CACHE_VAL([lt_cv_sys_lib_search_path_spec],
-[lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec"])
-sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
-AC_CACHE_VAL([lt_cv_sys_lib_dlsearch_path_spec],
-[lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec"])
-sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
-
variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
if test "$GCC" = yes; then
variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
fi
-])# AC_LIBTOOL_SYS_DYNAMIC_LINKER
-
-# _LT_AC_TAGCONFIG
-# ----------------
-AC_DEFUN([_LT_AC_TAGCONFIG],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
-AC_ARG_WITH([tags],
- [AC_HELP_STRING([--with-tags@<:@=TAGS@:>@],
- [include additional configurations @<:@automatic@:>@])],
- [tagnames="$withval"])
-
-if test -f "$ltmain" && test -n "$tagnames"; then
- if test ! -f "${ofile}"; then
- AC_MSG_WARN([output file `$ofile' does not exist])
- fi
-
- if test -z "$LTCC"; then
- eval "`$SHELL ${ofile} --config | grep '^LTCC='`"
- if test -z "$LTCC"; then
- AC_MSG_WARN([output file `$ofile' does not look like a libtool script])
- else
- AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile'])
- fi
- fi
- if test -z "$LTCFLAGS"; then
- eval "`$SHELL ${ofile} --config | grep '^LTCFLAGS='`"
- fi
-
- # Extract list of available tagged configurations in $ofile.
- # Note that this assumes the entire list is on one line.
- available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'`
-
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
- for tagname in $tagnames; do
- IFS="$lt_save_ifs"
- # Check whether tagname contains only valid characters
- case `$echo "X$tagname" | $Xsed -e 's:[[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]]::g'` in
- "") ;;
- *) AC_MSG_ERROR([invalid tag name: $tagname])
- ;;
- esac
-
- if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null
- then
- AC_MSG_ERROR([tag name \"$tagname\" already exists])
- fi
-
- # Update the list of available tags.
- if test -n "$tagname"; then
- echo appending configuration tag \"$tagname\" to $ofile
-
- case $tagname in
- CXX)
- if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
- ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
- (test "X$CXX" != "Xg++"))) ; then
- AC_LIBTOOL_LANG_CXX_CONFIG
- else
- tagname=""
- fi
- ;;
-
- F77)
- if test -n "$F77" && test "X$F77" != "Xno"; then
- AC_LIBTOOL_LANG_F77_CONFIG
- else
- tagname=""
- fi
- ;;
-
- GCJ)
- if test -n "$GCJ" && test "X$GCJ" != "Xno"; then
- AC_LIBTOOL_LANG_GCJ_CONFIG
- else
- tagname=""
- fi
- ;;
-
- RC)
- AC_LIBTOOL_LANG_RC_CONFIG
- ;;
-
- *)
- AC_MSG_ERROR([Unsupported tag name: $tagname])
- ;;
- esac
-
- # Append the new tag name to the list of available tags.
- if test -n "$tagname" ; then
- available_tags="$available_tags $tagname"
- fi
- fi
- done
- IFS="$lt_save_ifs"
-
- # Now substitute the updated list of available tags.
- if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then
- mv "${ofile}T" "$ofile"
- chmod +x "$ofile"
- else
- rm -f "${ofile}T"
- AC_MSG_ERROR([unable to update list of available tagged configurations.])
- fi
+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
+ sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
fi
-])# _LT_AC_TAGCONFIG
+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
+ sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+fi
+_LT_DECL([], [variables_saved_for_relink], [1],
+ [Variables whose values should be saved in libtool wrapper scripts and
+ restored at link time])
+_LT_DECL([], [need_lib_prefix], [0],
+ [Do we need the "lib" prefix for modules?])
+_LT_DECL([], [need_version], [0], [Do we need a version for libraries?])
+_LT_DECL([], [version_type], [0], [Library versioning type])
+_LT_DECL([], [runpath_var], [0], [Shared library runtime path variable])
+_LT_DECL([], [shlibpath_var], [0],[Shared library path variable])
+_LT_DECL([], [shlibpath_overrides_runpath], [0],
+ [Is shlibpath searched before the hard-coded library search path?])
+_LT_DECL([], [libname_spec], [1], [Format of library name prefix])
+_LT_DECL([], [library_names_spec], [1],
+ [[List of archive names. First name is the real one, the rest are links.
+ The last name is the one that the linker finds with -lNAME]])
+_LT_DECL([], [soname_spec], [1],
+ [[The coded name of the library, if different from the real name]])
+_LT_DECL([], [install_override_mode], [1],
+ [Permission mode override for installation of shared libraries])
+_LT_DECL([], [postinstall_cmds], [2],
+ [Command to use after installation of a shared archive])
+_LT_DECL([], [postuninstall_cmds], [2],
+ [Command to use after uninstallation of a shared archive])
+_LT_DECL([], [finish_cmds], [2],
+ [Commands used to finish a libtool library installation in a directory])
+_LT_DECL([], [finish_eval], [1],
+ [[As "finish_cmds", except a single script fragment to be evaled but
+ not shown]])
+_LT_DECL([], [hardcode_into_libs], [0],
+ [Whether we should hardcode library paths into libraries])
+_LT_DECL([], [sys_lib_search_path_spec], [2],
+ [Compile-time system search path for libraries])
+_LT_DECL([], [sys_lib_dlsearch_path_spec], [2],
+ [Run-time system search path for libraries])
+])# _LT_SYS_DYNAMIC_LINKER
-# AC_LIBTOOL_DLOPEN
-# -----------------
-# enable checks for dlopen support
-AC_DEFUN([AC_LIBTOOL_DLOPEN],
- [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])
-])# AC_LIBTOOL_DLOPEN
-
-# AC_LIBTOOL_WIN32_DLL
-# --------------------
-# declare package support for building win32 DLLs
-AC_DEFUN([AC_LIBTOOL_WIN32_DLL],
-[AC_BEFORE([$0], [AC_LIBTOOL_SETUP])
-])# AC_LIBTOOL_WIN32_DLL
-
-
-# AC_ENABLE_SHARED([DEFAULT])
-# ---------------------------
-# implement the --enable-shared flag
-# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
-AC_DEFUN([AC_ENABLE_SHARED],
-[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE([shared],
- [AC_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
- [build shared libraries @<:@default=]AC_ENABLE_SHARED_DEFAULT[@:>@])],
- [p=${PACKAGE-default}
- case $enableval in
- yes) enable_shared=yes ;;
- no) enable_shared=no ;;
- *)
- enable_shared=no
- # Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
- for pkg in $enableval; do
- IFS="$lt_save_ifs"
- if test "X$pkg" = "X$p"; then
- enable_shared=yes
- fi
- done
- IFS="$lt_save_ifs"
- ;;
- esac],
- [enable_shared=]AC_ENABLE_SHARED_DEFAULT)
-])# AC_ENABLE_SHARED
-
-
-# AC_DISABLE_SHARED
-# -----------------
-# set the default shared flag to --disable-shared
-AC_DEFUN([AC_DISABLE_SHARED],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_SHARED(no)
-])# AC_DISABLE_SHARED
-
-
-# AC_ENABLE_STATIC([DEFAULT])
-# ---------------------------
-# implement the --enable-static flag
-# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
-AC_DEFUN([AC_ENABLE_STATIC],
-[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE([static],
- [AC_HELP_STRING([--enable-static@<:@=PKGS@:>@],
- [build static libraries @<:@default=]AC_ENABLE_STATIC_DEFAULT[@:>@])],
- [p=${PACKAGE-default}
- case $enableval in
- yes) enable_static=yes ;;
- no) enable_static=no ;;
- *)
- enable_static=no
- # Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
- for pkg in $enableval; do
- IFS="$lt_save_ifs"
- if test "X$pkg" = "X$p"; then
- enable_static=yes
- fi
- done
- IFS="$lt_save_ifs"
- ;;
- esac],
- [enable_static=]AC_ENABLE_STATIC_DEFAULT)
-])# AC_ENABLE_STATIC
-
-
-# AC_DISABLE_STATIC
-# -----------------
-# set the default static flag to --disable-static
-AC_DEFUN([AC_DISABLE_STATIC],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_STATIC(no)
-])# AC_DISABLE_STATIC
-
-
-# AC_ENABLE_FAST_INSTALL([DEFAULT])
-# ---------------------------------
-# implement the --enable-fast-install flag
-# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
-AC_DEFUN([AC_ENABLE_FAST_INSTALL],
-[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE([fast-install],
- [AC_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
- [optimize for fast installation @<:@default=]AC_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
- [p=${PACKAGE-default}
- case $enableval in
- yes) enable_fast_install=yes ;;
- no) enable_fast_install=no ;;
- *)
- enable_fast_install=no
- # Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
- for pkg in $enableval; do
- IFS="$lt_save_ifs"
- if test "X$pkg" = "X$p"; then
- enable_fast_install=yes
- fi
- done
- IFS="$lt_save_ifs"
- ;;
- esac],
- [enable_fast_install=]AC_ENABLE_FAST_INSTALL_DEFAULT)
-])# AC_ENABLE_FAST_INSTALL
-
-
-# AC_DISABLE_FAST_INSTALL
-# -----------------------
-# set the default to --disable-fast-install
-AC_DEFUN([AC_DISABLE_FAST_INSTALL],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_FAST_INSTALL(no)
-])# AC_DISABLE_FAST_INSTALL
-
-
-# AC_LIBTOOL_PICMODE([MODE])
+# _LT_PATH_TOOL_PREFIX(TOOL)
# --------------------------
-# implement the --with-pic flag
-# MODE is either `yes' or `no'. If omitted, it defaults to `both'.
-AC_DEFUN([AC_LIBTOOL_PICMODE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-pic_mode=ifelse($#,1,$1,default)
-])# AC_LIBTOOL_PICMODE
-
-
-# AC_PROG_EGREP
-# -------------
-# This is predefined starting with Autoconf 2.54, so this conditional
-# definition can be removed once we require Autoconf 2.54 or later.
-m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP],
-[AC_CACHE_CHECK([for egrep], [ac_cv_prog_egrep],
- [if echo a | (grep -E '(a|b)') >/dev/null 2>&1
- then ac_cv_prog_egrep='grep -E'
- else ac_cv_prog_egrep='egrep'
- fi])
- EGREP=$ac_cv_prog_egrep
- AC_SUBST([EGREP])
-])])
-
-
-# AC_PATH_TOOL_PREFIX
-# -------------------
# find a file program which can recognize shared library
-AC_DEFUN([AC_PATH_TOOL_PREFIX],
-[AC_REQUIRE([AC_PROG_EGREP])dnl
+AC_DEFUN([_LT_PATH_TOOL_PREFIX],
+[m4_require([_LT_DECL_EGREP])dnl
AC_MSG_CHECKING([for $1])
AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
[case $MAGIC_CMD in
@@ -2197,7 +2954,7 @@
dnl $ac_dummy forces splitting on constant user-supplied paths.
dnl POSIX.2 word splitting is done only on the output of word expansions,
dnl not every word. This closes a longstanding sh security hole.
- ac_dummy="ifelse([$2], , $PATH, [$2])"
+ ac_dummy="m4_if([$2], , $PATH, [$2])"
for ac_dir in $ac_dummy; do
IFS="$lt_save_ifs"
test -z "$ac_dir" && ac_dir=.
@@ -2212,7 +2969,7 @@
$EGREP "$file_magic_regex" > /dev/null; then
:
else
- cat <<EOF 1>&2
+ cat <<_LT_EOF 1>&2
*** Warning: the command libtool uses to detect shared libraries,
*** $file_magic_cmd, produces output that libtool cannot recognize.
@@ -2223,7 +2980,7 @@
*** may want to report the problem to your system manager and/or to
*** bug-libtool at gnu.org
-EOF
+_LT_EOF
fi ;;
esac
fi
@@ -2240,37 +2997,48 @@
else
AC_MSG_RESULT(no)
fi
-])# AC_PATH_TOOL_PREFIX
+_LT_DECL([], [MAGIC_CMD], [0],
+ [Used to examine libraries when file_magic_cmd begins with "file"])dnl
+])# _LT_PATH_TOOL_PREFIX
+# Old name:
+AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], [])
-# AC_PATH_MAGIC
-# -------------
+
+# _LT_PATH_MAGIC
+# --------------
# find a file program which can recognize a shared library
-AC_DEFUN([AC_PATH_MAGIC],
-[AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
+m4_defun([_LT_PATH_MAGIC],
+[_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
if test -z "$lt_cv_path_MAGIC_CMD"; then
if test -n "$ac_tool_prefix"; then
- AC_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
+ _LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
else
MAGIC_CMD=:
fi
fi
-])# AC_PATH_MAGIC
+])# _LT_PATH_MAGIC
-# AC_PROG_LD
+# LT_PATH_LD
# ----------
# find the pathname to the GNU or non-GNU linker
-AC_DEFUN([AC_PROG_LD],
-[AC_ARG_WITH([gnu-ld],
- [AC_HELP_STRING([--with-gnu-ld],
+AC_DEFUN([LT_PATH_LD],
+[AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_PROG_ECHO_BACKSLASH])dnl
+
+AC_ARG_WITH([gnu-ld],
+ [AS_HELP_STRING([--with-gnu-ld],
[assume the C compiler uses GNU ld @<:@default=no@:>@])],
[test "$withval" = no || with_gnu_ld=yes],
- [with_gnu_ld=no])
-AC_REQUIRE([LT_AC_PROG_SED])dnl
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+ [with_gnu_ld=no])dnl
+
ac_prog=ld
if test "$GCC" = yes; then
# Check if gcc -print-prog-name=ld gives a path.
@@ -2287,9 +3055,9 @@
[[\\/]]* | ?:[[\\/]]*)
re_direlt='/[[^/]][[^/]]*/\.\./'
# Canonicalize the pathname of ld
- ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
- while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
- ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
+ ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
+ while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
+ ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
done
test -z "$LD" && LD="$ac_prog"
;;
@@ -2339,15 +3107,24 @@
AC_MSG_RESULT(no)
fi
test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-AC_PROG_LD_GNU
-])# AC_PROG_LD
+_LT_PATH_LD_GNU
+AC_SUBST([LD])
+_LT_TAGDECL([], [LD], [1], [The linker used to build libraries])
+])# LT_PATH_LD
-# AC_PROG_LD_GNU
-# --------------
-AC_DEFUN([AC_PROG_LD_GNU],
-[AC_REQUIRE([AC_PROG_EGREP])dnl
-AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
+# Old names:
+AU_ALIAS([AM_PROG_LD], [LT_PATH_LD])
+AU_ALIAS([AC_PROG_LD], [LT_PATH_LD])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_PROG_LD], [])
+dnl AC_DEFUN([AC_PROG_LD], [])
+
+
+# _LT_PATH_LD_GNU
+#- --------------
+m4_defun([_LT_PATH_LD_GNU],
+[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
[# I'd rather use --version here, but apparently some GNU lds only accept -v.
case `$LD -v 2>&1 </dev/null` in
*GNU* | *'with BFD'*)
@@ -2358,14 +3135,14 @@
;;
esac])
with_gnu_ld=$lt_cv_prog_gnu_ld
-])# AC_PROG_LD_GNU
+])# _LT_PATH_LD_GNU
-# AC_PROG_LD_RELOAD_FLAG
-# ----------------------
+# _LT_CMD_RELOAD
+# --------------
# find reload flag for linker
# -- PORTME Some linkers may need a different reload flag.
-AC_DEFUN([AC_PROG_LD_RELOAD_FLAG],
+m4_defun([_LT_CMD_RELOAD],
[AC_CACHE_CHECK([for $LD option to reload object files],
lt_cv_ld_reload_flag,
[lt_cv_ld_reload_flag='-r'])
@@ -2376,6 +3153,11 @@
esac
reload_cmds='$LD$reload_flag -o $output$reload_objs'
case $host_os in
+ cygwin* | mingw* | pw32* | cegcc*)
+ if test "$GCC" != yes; then
+ reload_cmds=false
+ fi
+ ;;
darwin*)
if test "$GCC" = yes; then
reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
@@ -2384,15 +3166,19 @@
fi
;;
esac
-])# AC_PROG_LD_RELOAD_FLAG
+_LT_TAGDECL([], [reload_flag], [1], [How to create reloadable object files])dnl
+_LT_TAGDECL([], [reload_cmds], [2])dnl
+])# _LT_CMD_RELOAD
-# AC_DEPLIBS_CHECK_METHOD
-# -----------------------
+# _LT_CHECK_MAGIC_METHOD
+# ----------------------
# how to check for library dependencies
# -- PORTME fill in with the dynamic library characteristics
-AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
-[AC_CACHE_CHECK([how to recognize dependent libraries],
+m4_defun([_LT_CHECK_MAGIC_METHOD],
+[m4_require([_LT_DECL_EGREP])
+m4_require([_LT_DECL_OBJDUMP])
+AC_CACHE_CHECK([how to recognize dependent libraries],
lt_cv_deplibs_check_method,
[lt_cv_file_magic_cmd='$MAGIC_CMD'
lt_cv_file_magic_test_file=
@@ -2433,21 +3219,29 @@
# Base MSYS/MinGW do not provide the 'file' command needed by
# func_win32_libid shell function, so use a weaker test based on 'objdump',
# unless we find 'file', for example because we are cross-compiling.
- if ( file / ) >/dev/null 2>&1; then
+ # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin.
+ if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then
lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
lt_cv_file_magic_cmd='func_win32_libid'
else
- lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+ # Keep this pattern in sync with the one in func_win32_libid.
+ lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)'
lt_cv_file_magic_cmd='$OBJDUMP -f'
fi
;;
+cegcc*)
+ # use the weaker test based on 'objdump'. See mingw*.
+ lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
+ lt_cv_file_magic_cmd='$OBJDUMP -f'
+ ;;
+
darwin* | rhapsody*)
lt_cv_deplibs_check_method=pass_all
;;
freebsd* | dragonfly*)
- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
case $host_cpu in
i*86 )
# Not sure whether the presence of OpenBSD here was a mistake.
@@ -2466,6 +3260,10 @@
lt_cv_deplibs_check_method=pass_all
;;
+haiku*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
hpux10.20* | hpux11*)
lt_cv_file_magic_cmd=/usr/bin/file
case $host_cpu in
@@ -2474,11 +3272,11 @@
lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
;;
hppa*64*)
- [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]']
+ [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]']
lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
;;
*)
- lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library'
+ lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]]\.[[0-9]]) shared library'
lt_cv_file_magic_test_file=/usr/lib/libc.sl
;;
esac
@@ -2499,13 +3297,13 @@
lt_cv_deplibs_check_method=pass_all
;;
-# This must be Linux ELF.
-linux* | k*bsd*-gnu)
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu)
lt_cv_deplibs_check_method=pass_all
;;
netbsd*)
- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
else
lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$'
@@ -2518,12 +3316,12 @@
lt_cv_file_magic_test_file=/usr/lib/libnls.so
;;
-nto-qnx*)
- lt_cv_deplibs_check_method=unknown
+*nto* | *qnx*)
+ lt_cv_deplibs_check_method=pass_all
;;
openbsd*)
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$'
else
lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
@@ -2542,6 +3340,10 @@
lt_cv_deplibs_check_method=pass_all
;;
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
sysv4 | sysv4.3*)
case $host_vendor in
motorola)
@@ -2569,22 +3371,47 @@
esac
;;
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+tpf*)
lt_cv_deplibs_check_method=pass_all
;;
esac
])
+
+file_magic_glob=
+want_nocaseglob=no
+if test "$build" = "$host"; then
+ case $host_os in
+ mingw* | pw32*)
+ if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then
+ want_nocaseglob=yes
+ else
+ file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[[\1]]\/[[\1]]\/g;/g"`
+ fi
+ ;;
+ esac
+fi
+
file_magic_cmd=$lt_cv_file_magic_cmd
deplibs_check_method=$lt_cv_deplibs_check_method
test -z "$deplibs_check_method" && deplibs_check_method=unknown
-])# AC_DEPLIBS_CHECK_METHOD
+_LT_DECL([], [deplibs_check_method], [1],
+ [Method to check whether dependent libraries are shared objects])
+_LT_DECL([], [file_magic_cmd], [1],
+ [Command to use when deplibs_check_method = "file_magic"])
+_LT_DECL([], [file_magic_glob], [1],
+ [How to find potential files when deplibs_check_method = "file_magic"])
+_LT_DECL([], [want_nocaseglob], [1],
+ [Find potential files using nocaseglob when deplibs_check_method = "file_magic"])
+])# _LT_CHECK_MAGIC_METHOD
-# AC_PROG_NM
+
+# LT_PATH_NM
# ----------
-# find the pathname to a BSD-compatible name lister
-AC_DEFUN([AC_PROG_NM],
-[AC_CACHE_CHECK([for BSD-compatible nm], lt_cv_path_NM,
+# find the pathname to a BSD- or MS-compatible name lister
+AC_DEFUN([LT_PATH_NM],
+[AC_REQUIRE([AC_PROG_CC])dnl
+AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM,
[if test -n "$NM"; then
# Let the user override the test.
lt_cv_path_NM="$NM"
@@ -2626,2179 +3453,184 @@
done
IFS="$lt_save_ifs"
done
- test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
+ : ${lt_cv_path_NM=no}
fi])
-NM="$lt_cv_path_NM"
-])# AC_PROG_NM
-
-
-# AC_CHECK_LIBM
-# -------------
-# check for math library
-AC_DEFUN([AC_CHECK_LIBM],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-LIBM=
-case $host in
-*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*)
- # These system don't have libm, or don't need it
- ;;
-*-ncr-sysv4.3*)
- AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
- AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
- ;;
-*)
- AC_CHECK_LIB(m, cos, LIBM="-lm")
- ;;
-esac
-])# AC_CHECK_LIBM
-
-
-# AC_LIBLTDL_CONVENIENCE([DIRECTORY])
-# -----------------------------------
-# sets LIBLTDL to the link flags for the libltdl convenience library and
-# LTDLINCL to the include flags for the libltdl header and adds
-# --enable-ltdl-convenience to the configure arguments. Note that
-# AC_CONFIG_SUBDIRS is not called here. If DIRECTORY is not provided,
-# it is assumed to be `libltdl'. LIBLTDL will be prefixed with
-# '${top_builddir}/' and LTDLINCL will be prefixed with '${top_srcdir}/'
-# (note the single quotes!). If your package is not flat and you're not
-# using automake, define top_builddir and top_srcdir appropriately in
-# the Makefiles.
-AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
- case $enable_ltdl_convenience in
- no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
- "") enable_ltdl_convenience=yes
- ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
- esac
- LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
- LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
- # For backwards non-gettext consistent compatibility...
- INCLTDL="$LTDLINCL"
-])# AC_LIBLTDL_CONVENIENCE
-
-
-# AC_LIBLTDL_INSTALLABLE([DIRECTORY])
-# -----------------------------------
-# sets LIBLTDL to the link flags for the libltdl installable library and
-# LTDLINCL to the include flags for the libltdl header and adds
-# --enable-ltdl-install to the configure arguments. Note that
-# AC_CONFIG_SUBDIRS is not called here. If DIRECTORY is not provided,
-# and an installed libltdl is not found, it is assumed to be `libltdl'.
-# LIBLTDL will be prefixed with '${top_builddir}/'# and LTDLINCL with
-# '${top_srcdir}/' (note the single quotes!). If your package is not
-# flat and you're not using automake, define top_builddir and top_srcdir
-# appropriately in the Makefiles.
-# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
-AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
- AC_CHECK_LIB(ltdl, lt_dlinit,
- [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
- [if test x"$enable_ltdl_install" = xno; then
- AC_MSG_WARN([libltdl not installed, but installation disabled])
- else
- enable_ltdl_install=yes
- fi
- ])
- if test x"$enable_ltdl_install" = x"yes"; then
- ac_configure_args="$ac_configure_args --enable-ltdl-install"
- LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
- LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
+if test "$lt_cv_path_NM" != "no"; then
+ NM="$lt_cv_path_NM"
+else
+ # Didn't find any BSD compatible name lister, look for dumpbin.
+ if test -n "$DUMPBIN"; then :
+ # Let the user override the test.
else
- ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
- LIBLTDL="-lltdl"
- LTDLINCL=
+ AC_CHECK_TOOLS(DUMPBIN, [dumpbin "link -dump"], :)
+ case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in
+ *COFF*)
+ DUMPBIN="$DUMPBIN -symbols"
+ ;;
+ *)
+ DUMPBIN=:
+ ;;
+ esac
fi
- # For backwards non-gettext consistent compatibility...
- INCLTDL="$LTDLINCL"
-])# AC_LIBLTDL_INSTALLABLE
-
-
-# AC_LIBTOOL_CXX
-# --------------
-# enable support for C++ libraries
-AC_DEFUN([AC_LIBTOOL_CXX],
-[AC_REQUIRE([_LT_AC_LANG_CXX])
-])# AC_LIBTOOL_CXX
-
-
-# _LT_AC_LANG_CXX
-# ---------------
-AC_DEFUN([_LT_AC_LANG_CXX],
-[AC_REQUIRE([AC_PROG_CXX])
-AC_REQUIRE([_LT_AC_PROG_CXXCPP])
-_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}CXX])
-])# _LT_AC_LANG_CXX
-
-# _LT_AC_PROG_CXXCPP
-# ------------------
-AC_DEFUN([_LT_AC_PROG_CXXCPP],
-[
-AC_REQUIRE([AC_PROG_CXX])
-if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
- ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
- (test "X$CXX" != "Xg++"))) ; then
- AC_PROG_CXXCPP
-fi
-])# _LT_AC_PROG_CXXCPP
-
-# AC_LIBTOOL_F77
-# --------------
-# enable support for Fortran 77 libraries
-AC_DEFUN([AC_LIBTOOL_F77],
-[AC_REQUIRE([_LT_AC_LANG_F77])
-])# AC_LIBTOOL_F77
-
-
-# _LT_AC_LANG_F77
-# ---------------
-AC_DEFUN([_LT_AC_LANG_F77],
-[AC_REQUIRE([AC_PROG_F77])
-_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}F77])
-])# _LT_AC_LANG_F77
-
-
-# AC_LIBTOOL_GCJ
-# --------------
-# enable support for GCJ libraries
-AC_DEFUN([AC_LIBTOOL_GCJ],
-[AC_REQUIRE([_LT_AC_LANG_GCJ])
-])# AC_LIBTOOL_GCJ
-
-
-# _LT_AC_LANG_GCJ
-# ---------------
-AC_DEFUN([_LT_AC_LANG_GCJ],
-[AC_PROVIDE_IFELSE([AC_PROG_GCJ],[],
- [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[],
- [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[],
- [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])],
- [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])],
- [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])])
-_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}GCJ])
-])# _LT_AC_LANG_GCJ
-
-
-# AC_LIBTOOL_RC
-# -------------
-# enable support for Windows resource files
-AC_DEFUN([AC_LIBTOOL_RC],
-[AC_REQUIRE([LT_AC_PROG_RC])
-_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}RC])
-])# AC_LIBTOOL_RC
-
-
-# AC_LIBTOOL_LANG_C_CONFIG
-# ------------------------
-# Ensure that the configuration vars for the C compiler are
-# suitably defined. Those variables are subsequently used by
-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG], [_LT_AC_LANG_C_CONFIG])
-AC_DEFUN([_LT_AC_LANG_C_CONFIG],
-[lt_save_CC="$CC"
-AC_LANG_PUSH(C)
-
-# Source file extension for C test sources.
-ac_ext=c
-
-# Object file extension for compiled C test sources.
-objext=o
-_LT_AC_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="int some_variable = 0;"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='int main(){return(0);}'
-
-_LT_AC_SYS_COMPILER
-
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
-
-AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
-AC_LIBTOOL_PROG_COMPILER_PIC($1)
-AC_LIBTOOL_PROG_CC_C_O($1)
-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
-AC_LIBTOOL_PROG_LD_SHLIBS($1)
-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
-AC_LIBTOOL_SYS_LIB_STRIP
-AC_LIBTOOL_DLOPEN_SELF
-
-# Report which library types will actually be built
-AC_MSG_CHECKING([if libtool supports shared libraries])
-AC_MSG_RESULT([$can_build_shared])
-
-AC_MSG_CHECKING([whether to build shared libraries])
-test "$can_build_shared" = "no" && enable_shared=no
-
-# On AIX, shared libraries and static libraries use the same namespace, and
-# are all built from PIC.
-case $host_os in
-aix3*)
- test "$enable_shared" = yes && enable_static=no
- if test -n "$RANLIB"; then
- archive_cmds="$archive_cmds~\$RANLIB \$lib"
- postinstall_cmds='$RANLIB $lib'
+ AC_SUBST([DUMPBIN])
+ if test "$DUMPBIN" != ":"; then
+ NM="$DUMPBIN"
fi
- ;;
-
-aix[[4-9]]*)
- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
- test "$enable_shared" = yes && enable_static=no
- fi
- ;;
-esac
-AC_MSG_RESULT([$enable_shared])
-
-AC_MSG_CHECKING([whether to build static libraries])
-# Make sure either enable_shared or enable_static is yes.
-test "$enable_shared" = yes || enable_static=yes
-AC_MSG_RESULT([$enable_static])
-
-AC_LIBTOOL_CONFIG($1)
-
-AC_LANG_POP
-CC="$lt_save_CC"
-])# AC_LIBTOOL_LANG_C_CONFIG
-
-
-# AC_LIBTOOL_LANG_CXX_CONFIG
-# --------------------------
-# Ensure that the configuration vars for the C compiler are
-# suitably defined. Those variables are subsequently used by
-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [_LT_AC_LANG_CXX_CONFIG(CXX)])
-AC_DEFUN([_LT_AC_LANG_CXX_CONFIG],
-[AC_LANG_PUSH(C++)
-AC_REQUIRE([AC_PROG_CXX])
-AC_REQUIRE([_LT_AC_PROG_CXXCPP])
-
-_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-_LT_AC_TAGVAR(allow_undefined_flag, $1)=
-_LT_AC_TAGVAR(always_export_symbols, $1)=no
-_LT_AC_TAGVAR(archive_expsym_cmds, $1)=
-_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
-_LT_AC_TAGVAR(hardcode_direct, $1)=no
-_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
-_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
-_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-_LT_AC_TAGVAR(hardcode_minus_L, $1)=no
-_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-_LT_AC_TAGVAR(hardcode_automatic, $1)=no
-_LT_AC_TAGVAR(module_cmds, $1)=
-_LT_AC_TAGVAR(module_expsym_cmds, $1)=
-_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
-_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-_LT_AC_TAGVAR(no_undefined_flag, $1)=
-_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
-
-# Dependencies to place before and after the object being linked:
-_LT_AC_TAGVAR(predep_objects, $1)=
-_LT_AC_TAGVAR(postdep_objects, $1)=
-_LT_AC_TAGVAR(predeps, $1)=
-_LT_AC_TAGVAR(postdeps, $1)=
-_LT_AC_TAGVAR(compiler_lib_search_path, $1)=
-_LT_AC_TAGVAR(compiler_lib_search_dirs, $1)=
-
-# Source file extension for C++ test sources.
-ac_ext=cpp
-
-# Object file extension for compiled C++ test sources.
-objext=o
-_LT_AC_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="int some_variable = 0;"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }'
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_AC_SYS_COMPILER
-
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
-
-# Allow CC to be a program name with arguments.
-lt_save_CC=$CC
-lt_save_LD=$LD
-lt_save_GCC=$GCC
-GCC=$GXX
-lt_save_with_gnu_ld=$with_gnu_ld
-lt_save_path_LD=$lt_cv_path_LD
-if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
- lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
-else
- $as_unset lt_cv_prog_gnu_ld
fi
-if test -n "${lt_cv_path_LDCXX+set}"; then
- lt_cv_path_LD=$lt_cv_path_LDCXX
-else
- $as_unset lt_cv_path_LD
-fi
-test -z "${LDCXX+set}" || LD=$LDCXX
-CC=${CXX-"c++"}
-compiler=$CC
-_LT_AC_TAGVAR(compiler, $1)=$CC
-_LT_CC_BASENAME([$compiler])
+test -z "$NM" && NM=nm
+AC_SUBST([NM])
+_LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl
-# We don't want -fno-exception wen compiling C++ code, so set the
-# no_builtin_flag separately
-if test "$GXX" = yes; then
- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
-else
- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
-fi
-
-if test "$GXX" = yes; then
- # Set up default GNU C++ configuration
-
- AC_PROG_LD
-
- # Check if GNU C++ uses GNU ld as the underlying linker, since the
- # archiving commands below assume that GNU ld is being used.
- if test "$with_gnu_ld" = yes; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-
- # If archive_cmds runs LD, not CC, wlarc should be empty
- # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
- # investigate it a little bit more. (MM)
- wlarc='${wl}'
-
- # ancient GNU ld didn't support --whole-archive et. al.
- if eval "`$CC -print-prog-name=ld` --help 2>&1" | \
- grep 'no-whole-archive' > /dev/null; then
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
- else
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
- fi
- else
- with_gnu_ld=no
- wlarc=
-
- # A generic and very simple default shared library creation
- # command for GNU C++ for the case where it uses the native
- # linker, instead of GNU ld. If possible, this setting should
- # overridden to take advantage of the native linker features on
- # the platform it is being used on.
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface],
+ [lt_cv_nm_interface="BSD nm"
+ echo "int some_variable = 0;" > conftest.$ac_ext
+ (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&AS_MESSAGE_LOG_FD)
+ (eval "$ac_compile" 2>conftest.err)
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD)
+ (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ (eval echo "\"\$as_me:$LINENO: output\"" >&AS_MESSAGE_LOG_FD)
+ cat conftest.out >&AS_MESSAGE_LOG_FD
+ if $GREP 'External.*some_variable' conftest.out > /dev/null; then
+ lt_cv_nm_interface="MS dumpbin"
fi
+ rm -f conftest*])
+])# LT_PATH_NM
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
+# Old names:
+AU_ALIAS([AM_PROG_NM], [LT_PATH_NM])
+AU_ALIAS([AC_PROG_NM], [LT_PATH_NM])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_PROG_NM], [])
+dnl AC_DEFUN([AC_PROG_NM], [])
-else
- GXX=no
- with_gnu_ld=no
- wlarc=
-fi
+# _LT_CHECK_SHAREDLIB_FROM_LINKLIB
+# --------------------------------
+# how to determine the name of the shared library
+# associated with a specific link library.
+# -- PORTME fill in with the dynamic library characteristics
+m4_defun([_LT_CHECK_SHAREDLIB_FROM_LINKLIB],
+[m4_require([_LT_DECL_EGREP])
+m4_require([_LT_DECL_OBJDUMP])
+m4_require([_LT_DECL_DLLTOOL])
+AC_CACHE_CHECK([how to associate runtime and link libraries],
+lt_cv_sharedlib_from_linklib_cmd,
+[lt_cv_sharedlib_from_linklib_cmd='unknown'
-# PORTME: fill in a description of your system's C++ link characteristics
-AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
-_LT_AC_TAGVAR(ld_shlibs, $1)=yes
case $host_os in
- aix3*)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
+cygwin* | mingw* | pw32* | cegcc*)
+ # two different shell functions defined in ltmain.sh
+ # decide which to use based on capabilities of $DLLTOOL
+ case `$DLLTOOL --help 2>&1` in
+ *--identify-strict*)
+ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
;;
- aix[[4-9]]*)
- if test "$host_cpu" = ia64; then
- # On IA64, the linker does run time linking by default, so we don't
- # have to do anything special.
- aix_use_runtimelinking=no
- exp_sym_flag='-Bexport'
- no_entry_flag=""
- else
- aix_use_runtimelinking=no
-
- # Test if we are trying to use run time linking or normal
- # AIX style linking. If -brtl is somewhere in LDFLAGS, we
- # need to do runtime linking.
- case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
- for ld_flag in $LDFLAGS; do
- case $ld_flag in
- *-brtl*)
- aix_use_runtimelinking=yes
- break
- ;;
- esac
- done
- ;;
- esac
-
- exp_sym_flag='-bexport'
- no_entry_flag='-bnoentry'
- fi
-
- # When large executables or shared objects are built, AIX ld can
- # have problems creating the table of contents. If linking a library
- # or program results in "error TOC overflow" add -mminimal-toc to
- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-
- _LT_AC_TAGVAR(archive_cmds, $1)=''
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-
- if test "$GXX" = yes; then
- case $host_os in aix4.[[012]]|aix4.[[012]].*)
- # We only want to do this on AIX 4.2 and lower, the check
- # below for broken collect2 doesn't work under 4.3+
- collect2name=`${CC} -print-prog-name=collect2`
- if test -f "$collect2name" && \
- strings "$collect2name" | grep resolve_lib_name >/dev/null
- then
- # We have reworked collect2
- :
- else
- # We have old collect2
- _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
- # It fails to find uninstalled libraries when the uninstalled
- # path is not listed in the libpath. Setting hardcode_minus_L
- # to unsupported forces relinking
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
- fi
- ;;
- esac
- shared_flag='-shared'
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag="$shared_flag "'${wl}-G'
- fi
- else
- # not using gcc
- if test "$host_cpu" = ia64; then
- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
- # chokes on -Wl,-G. The following line is correct:
- shared_flag='-G'
- else
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag='${wl}-G'
- else
- shared_flag='${wl}-bM:SRE'
- fi
- fi
- fi
-
- # It seems that -bexpall does not export symbols beginning with
- # underscore (_), so it is better to generate a list of symbols to export.
- _LT_AC_TAGVAR(always_export_symbols, $1)=yes
- if test "$aix_use_runtimelinking" = yes; then
- # Warning - without using the other runtime loading flags (-brtl),
- # -berok will link without error, but may produce a broken library.
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
- # Determine the default libpath from the value encoded in an empty executable.
- _LT_AC_SYS_LIBPATH_AIX
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
- else
- if test "$host_cpu" = ia64; then
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
- _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
- else
- # Determine the default libpath from the value encoded in an empty executable.
- _LT_AC_SYS_LIBPATH_AIX
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
- # Warning - without using the other run time loading flags,
- # -berok will link without error, but may produce a broken library.
- _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
- # Exported symbols can be pulled into shared objects from archives
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
- # This is similar to how AIX traditionally builds its shared libraries.
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
- fi
- fi
- ;;
-
- beos*)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
- # Joseph Beckenbach <jrb3 at best.com> says some releases of gcc
- # support --undefined. This deserves some investigation. FIXME
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- else
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
-
- chorus*)
- case $cc_basename in
- *)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- esac
- ;;
-
- cygwin* | mingw* | pw32*)
- # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
- # as there is no search path for DLLs.
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
- _LT_AC_TAGVAR(always_export_symbols, $1)=no
- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-
- if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- # If the export-symbols file already is a .def file (1st line
- # is EXPORTS), use it as is; otherwise, prepend...
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
- cp $export_symbols $output_objdir/$soname.def;
- else
- echo EXPORTS > $output_objdir/$soname.def;
- cat $export_symbols >> $output_objdir/$soname.def;
- fi~
- $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- else
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
- darwin* | rhapsody*)
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
- _LT_AC_TAGVAR(hardcode_direct, $1)=no
- _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=''
- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
- _LT_AC_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined"
- if test "$GXX" = yes ; then
- output_verbose_link_cmd='echo'
- _LT_AC_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
- _LT_AC_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
- _LT_AC_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
- if test "$lt_cv_apple_cc_single_mod" != "yes"; then
- _LT_AC_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
- fi
- else
- case $cc_basename in
- xlc*)
- output_verbose_link_cmd='echo'
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
- _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- ;;
- *)
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- esac
- fi
- ;;
-
- dgux*)
- case $cc_basename in
- ec++*)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- ghcx*)
- # Green Hills C++ Compiler
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- *)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- esac
- ;;
- freebsd[[12]]*)
- # C++ shared libraries reported to be fairly broken before switch to ELF
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- freebsd-elf*)
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
- ;;
- freebsd* | dragonfly*)
- # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
- # conventions
- _LT_AC_TAGVAR(ld_shlibs, $1)=yes
- ;;
- gnu*)
- ;;
- hpux9*)
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
- # but as the default
- # location of the library.
-
- case $cc_basename in
- CC*)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- aCC*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- #
- # There doesn't appear to be a way to prevent this compiler from
- # explicitly linking system object files so we need to strip them
- # from the output so that they don't get included in the library
- # dependencies.
- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[[-]]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
- ;;
- *)
- if test "$GXX" = yes; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
- else
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
- esac
- ;;
- hpux10*|hpux11*)
- if test $with_gnu_ld = no; then
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
- case $host_cpu in
- hppa*64*|ia64*) ;;
- *)
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
- ;;
- esac
- fi
- case $host_cpu in
- hppa*64*|ia64*)
- _LT_AC_TAGVAR(hardcode_direct, $1)=no
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
- *)
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
- # but as the default
- # location of the library.
- ;;
- esac
-
- case $cc_basename in
- CC*)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- aCC*)
- case $host_cpu in
- hppa*64*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- ;;
- ia64*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- ;;
- *)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- ;;
- esac
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- #
- # There doesn't appear to be a way to prevent this compiler from
- # explicitly linking system object files so we need to strip them
- # from the output so that they don't get included in the library
- # dependencies.
- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
- ;;
- *)
- if test "$GXX" = yes; then
- if test $with_gnu_ld = no; then
- case $host_cpu in
- hppa*64*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- ;;
- ia64*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- ;;
- *)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- ;;
- esac
- fi
- else
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
- esac
- ;;
- interix[[3-9]]*)
- _LT_AC_TAGVAR(hardcode_direct, $1)=no
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
- # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
- # Instead, shared libraries are loaded at an image base (0x10000000 by
- # default) and relocated if they conflict, which is a slow very memory
- # consuming and fragmenting process. To avoid this, we pick a random,
- # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
- # time. Moving up from 0x10000000 also allows more sbrk(2) space.
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- ;;
- irix5* | irix6*)
- case $cc_basename in
- CC*)
- # SGI C++
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-
- # Archives containing C++ object files must be created using
- # "CC -ar", where "CC" is the IRIX C++ compiler. This is
- # necessary to make sure instantiated templates are included
- # in the archive.
- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
- ;;
- *)
- if test "$GXX" = yes; then
- if test "$with_gnu_ld" = no; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- else
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib'
- fi
- fi
- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
- ;;
- esac
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
- ;;
- linux* | k*bsd*-gnu)
- case $cc_basename in
- KCC*)
- # Kuck and Associates, Inc. (KAI) C++ Compiler
-
- # KCC will only create a shared library if the output file
- # ends with ".so" (or ".sl" for HP-UX), so rename the library
- # to its proper name (with version) after linking.
- _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- #
- # There doesn't appear to be a way to prevent this compiler from
- # explicitly linking system object files so we need to strip them
- # from the output so that they don't get included in the library
- # dependencies.
- output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath,$libdir'
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-
- # Archives containing C++ object files must be created using
- # "CC -Bstatic", where "CC" is the KAI C++ compiler.
- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
- ;;
- icpc*)
- # Intel C++
- with_gnu_ld=yes
- # version 8.0 and above of icpc choke on multiply defined symbols
- # if we add $predep_objects and $postdep_objects, however 7.1 and
- # earlier do not add the objects themselves.
- case `$CC -V 2>&1` in
- *"Version 7."*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- ;;
- *) # Version 8.0 or newer
- tmp_idyn=
- case $host_cpu in
- ia64*) tmp_idyn=' -i_dynamic';;
- esac
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- ;;
- esac
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
- ;;
- pgCC* | pgcpp*)
- # Portland Group C++ compiler
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
-
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
- ;;
- cxx*)
- # Compaq C++
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
-
- runpath_var=LD_RUN_PATH
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- #
- # There doesn't appear to be a way to prevent this compiler from
- # explicitly linking system object files so we need to strip them
- # from the output so that they don't get included in the library
- # dependencies.
- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
- ;;
- *)
- case `$CC -V 2>&1 | sed 5q` in
- *Sun\ C*)
- # Sun C++ 5.9
- _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs'
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-
- # Not sure whether something based on
- # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
- # would be better.
- output_verbose_link_cmd='echo'
-
- # Archives containing C++ object files must be created using
- # "CC -xar", where "CC" is the Sun C++ compiler. This is
- # necessary to make sure instantiated templates are included
- # in the archive.
- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
- ;;
- esac
- ;;
- esac
- ;;
- lynxos*)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- m88k*)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- mvs*)
- case $cc_basename in
- cxx*)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- *)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- esac
- ;;
- netbsd*)
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
- wlarc=
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- fi
- # Workaround some broken pre-1.5 toolchains
- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
- ;;
- openbsd2*)
- # C++ shared libraries are fairly broken
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- openbsd*)
- if test -f /usr/libexec/ld.so; then
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
- fi
- output_verbose_link_cmd='echo'
- else
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
- osf3*)
- case $cc_basename in
- KCC*)
- # Kuck and Associates, Inc. (KAI) C++ Compiler
-
- # KCC will only create a shared library if the output file
- # ends with ".so" (or ".sl" for HP-UX), so rename the library
- # to its proper name (with version) after linking.
- _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
- # Archives containing C++ object files must be created using
- # "CC -Bstatic", where "CC" is the KAI C++ compiler.
- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
-
- ;;
- RCC*)
- # Rational C++ 2.4.1
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- cxx*)
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- #
- # There doesn't appear to be a way to prevent this compiler from
- # explicitly linking system object files so we need to strip them
- # from the output so that they don't get included in the library
- # dependencies.
- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
- ;;
- *)
- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
-
- else
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
- esac
- ;;
- osf4* | osf5*)
- case $cc_basename in
- KCC*)
- # Kuck and Associates, Inc. (KAI) C++ Compiler
-
- # KCC will only create a shared library if the output file
- # ends with ".so" (or ".sl" for HP-UX), so rename the library
- # to its proper name (with version) after linking.
- _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
- # Archives containing C++ object files must be created using
- # the KAI C++ compiler.
- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs'
- ;;
- RCC*)
- # Rational C++ 2.4.1
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- cxx*)
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
- echo "-hidden">> $lib.exp~
- $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~
- $rm $lib.exp'
-
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- #
- # There doesn't appear to be a way to prevent this compiler from
- # explicitly linking system object files so we need to strip them
- # from the output so that they don't get included in the library
- # dependencies.
- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
- ;;
- *)
- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
-
- else
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
- esac
- ;;
- psos*)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- sunos4*)
- case $cc_basename in
- CC*)
- # Sun C++ 4.x
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- lcc*)
- # Lucid
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- *)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- esac
- ;;
- solaris*)
- case $cc_basename in
- CC*)
- # Sun C++ 4.2, 5.x and Centerline C++
- _LT_AC_TAGVAR(archive_cmds_need_lc,$1)=yes
- _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs'
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
- $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- case $host_os in
- solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
- *)
- # The compiler driver will combine and reorder linker options,
- # but understands `-z linker_flag'.
- # Supported since Solaris 2.6 (maybe 2.5.1?)
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
- ;;
- esac
- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-
- output_verbose_link_cmd='echo'
-
- # Archives containing C++ object files must be created using
- # "CC -xar", where "CC" is the Sun C++ compiler. This is
- # necessary to make sure instantiated templates are included
- # in the archive.
- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
- ;;
- gcx*)
- # Green Hills C++ Compiler
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-
- # The C++ compiler must be used to create the archive.
- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
- ;;
- *)
- # GNU C++ compiler with Solaris linker
- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
- _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
- if $CC --version | grep -v '^2\.7' > /dev/null; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
- $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
- else
- # g++ 2.7 appears to require `-G' NOT `-shared' on this
- # platform.
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
- $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
- fi
-
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
- case $host_os in
- solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
- *)
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
- ;;
- esac
- fi
- ;;
- esac
- ;;
- sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
- _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- runpath_var='LD_RUN_PATH'
-
- case $cc_basename in
- CC*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- *)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- esac
- ;;
- sysv5* | sco3.2v5* | sco5v6*)
- # Note: We can NOT use -z defs as we might desire, because we do not
- # link with -lc, and that would cause any symbols used from libc to
- # always be unresolved, which means just about no library would
- # ever link correctly. If we're not using GNU ld we use -z text
- # though, which does catch some bad symbols but isn't as heavy-handed
- # as -z defs.
- # For security reasons, it is highly recommended that you always
- # use absolute paths for naming shared libraries, and exclude the
- # DT_RUNPATH tag from executables and libraries. But doing so
- # requires that you compile everything twice, which is a pain.
- # So that behaviour is only enabled if SCOABSPATH is set to a
- # non-empty value in the environment. Most likely only useful for
- # creating official distributions of packages.
- # This is a hack until libtool officially supports absolute path
- # names for shared libraries.
- _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
- runpath_var='LD_RUN_PATH'
-
- case $cc_basename in
- CC*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- *)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- esac
- ;;
- tandem*)
- case $cc_basename in
- NCC*)
- # NonStop-UX NCC 3.20
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- *)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- esac
- ;;
- vxworks*)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
*)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback
;;
-esac
-AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
-test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
-
-_LT_AC_TAGVAR(GCC, $1)="$GXX"
-_LT_AC_TAGVAR(LD, $1)="$LD"
-
-AC_LIBTOOL_POSTDEP_PREDEP($1)
-AC_LIBTOOL_PROG_COMPILER_PIC($1)
-AC_LIBTOOL_PROG_CC_C_O($1)
-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
-AC_LIBTOOL_PROG_LD_SHLIBS($1)
-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
-
-AC_LIBTOOL_CONFIG($1)
-
-AC_LANG_POP
-CC=$lt_save_CC
-LDCXX=$LD
-LD=$lt_save_LD
-GCC=$lt_save_GCC
-with_gnu_ldcxx=$with_gnu_ld
-with_gnu_ld=$lt_save_with_gnu_ld
-lt_cv_path_LDCXX=$lt_cv_path_LD
-lt_cv_path_LD=$lt_save_path_LD
-lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
-lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
-])# AC_LIBTOOL_LANG_CXX_CONFIG
-
-# AC_LIBTOOL_POSTDEP_PREDEP([TAGNAME])
-# ------------------------------------
-# Figure out "hidden" library dependencies from verbose
-# compiler output when linking a shared library.
-# Parse the compiler output and extract the necessary
-# objects, libraries and library flags.
-AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
-dnl we can't use the lt_simple_compile_test_code here,
-dnl because it contains code intended for an executable,
-dnl not a library. It's possible we should let each
-dnl tag define a new lt_????_link_test_code variable,
-dnl but it's only used here...
-ifelse([$1],[],[cat > conftest.$ac_ext <<EOF
-int a;
-void foo (void) { a = 0; }
-EOF
-],[$1],[CXX],[cat > conftest.$ac_ext <<EOF
-class Foo
-{
-public:
- Foo (void) { a = 0; }
-private:
- int a;
-};
-EOF
-],[$1],[F77],[cat > conftest.$ac_ext <<EOF
- subroutine foo
- implicit none
- integer*4 a
- a=0
- return
- end
-EOF
-],[$1],[GCJ],[cat > conftest.$ac_ext <<EOF
-public class foo {
- private int a;
- public void bar (void) {
- a = 0;
- }
-};
-EOF
-])
-dnl Parse the compiler output and extract the necessary
-dnl objects, libraries and library flags.
-if AC_TRY_EVAL(ac_compile); then
- # Parse the compiler output and extract the necessary
- # objects, libraries and library flags.
-
- # Sentinel used to keep track of whether or not we are before
- # the conftest object file.
- pre_test_object_deps_done=no
-
- # The `*' in the case matches for architectures that use `case' in
- # $output_verbose_cmd can trigger glob expansion during the loop
- # eval without this substitution.
- output_verbose_link_cmd=`$echo "X$output_verbose_link_cmd" | $Xsed -e "$no_glob_subst"`
-
- for p in `eval $output_verbose_link_cmd`; do
- case $p in
-
- -L* | -R* | -l*)
- # Some compilers place space between "-{L,R}" and the path.
- # Remove the space.
- if test $p = "-L" \
- || test $p = "-R"; then
- prev=$p
- continue
- else
- prev=
- fi
-
- if test "$pre_test_object_deps_done" = no; then
- case $p in
- -L* | -R*)
- # Internal compiler library paths should come after those
- # provided the user. The postdeps already come after the
- # user supplied libs so there is no need to process them.
- if test -z "$_LT_AC_TAGVAR(compiler_lib_search_path, $1)"; then
- _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
- else
- _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${_LT_AC_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
- fi
- ;;
- # The "-l" case would never come before the object being
- # linked, so don't bother handling this case.
- esac
- else
- if test -z "$_LT_AC_TAGVAR(postdeps, $1)"; then
- _LT_AC_TAGVAR(postdeps, $1)="${prev}${p}"
- else
- _LT_AC_TAGVAR(postdeps, $1)="${_LT_AC_TAGVAR(postdeps, $1)} ${prev}${p}"
- fi
- fi
- ;;
-
- *.$objext)
- # This assumes that the test object file only shows up
- # once in the compiler output.
- if test "$p" = "conftest.$objext"; then
- pre_test_object_deps_done=yes
- continue
- fi
-
- if test "$pre_test_object_deps_done" = no; then
- if test -z "$_LT_AC_TAGVAR(predep_objects, $1)"; then
- _LT_AC_TAGVAR(predep_objects, $1)="$p"
- else
- _LT_AC_TAGVAR(predep_objects, $1)="$_LT_AC_TAGVAR(predep_objects, $1) $p"
- fi
- else
- if test -z "$_LT_AC_TAGVAR(postdep_objects, $1)"; then
- _LT_AC_TAGVAR(postdep_objects, $1)="$p"
- else
- _LT_AC_TAGVAR(postdep_objects, $1)="$_LT_AC_TAGVAR(postdep_objects, $1) $p"
- fi
- fi
- ;;
-
- *) ;; # Ignore the rest.
-
- esac
- done
-
- # Clean up.
- rm -f a.out a.exe
-else
- echo "libtool.m4: error: problem compiling $1 test program"
-fi
-
-$rm -f confest.$objext
-
-_LT_AC_TAGVAR(compiler_lib_search_dirs, $1)=
-if test -n "$_LT_AC_TAGVAR(compiler_lib_search_path, $1)"; then
- _LT_AC_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_AC_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
-fi
-
-# PORTME: override above test on systems where it is broken
-ifelse([$1],[CXX],
-[case $host_os in
-interix[[3-9]]*)
- # Interix 3.5 installs completely hosed .la files for C++, so rather than
- # hack all around it, let's just trust "g++" to DTRT.
- _LT_AC_TAGVAR(predep_objects,$1)=
- _LT_AC_TAGVAR(postdep_objects,$1)=
- _LT_AC_TAGVAR(postdeps,$1)=
- ;;
-
-linux*)
- case `$CC -V 2>&1 | sed 5q` in
- *Sun\ C*)
- # Sun C++ 5.9
- #
- # The more standards-conforming stlport4 library is
- # incompatible with the Cstd library. Avoid specifying
- # it if it's in CXXFLAGS. Ignore libCrun as
- # -library=stlport4 depends on it.
- case " $CXX $CXXFLAGS " in
- *" -library=stlport4 "*)
- solaris_use_stlport4=yes
- ;;
- esac
- if test "$solaris_use_stlport4" != yes; then
- _LT_AC_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
- fi
- ;;
esac
;;
-
-solaris*)
- case $cc_basename in
- CC*)
- # The more standards-conforming stlport4 library is
- # incompatible with the Cstd library. Avoid specifying
- # it if it's in CXXFLAGS. Ignore libCrun as
- # -library=stlport4 depends on it.
- case " $CXX $CXXFLAGS " in
- *" -library=stlport4 "*)
- solaris_use_stlport4=yes
- ;;
- esac
-
- # Adding this requires a known-good setup of shared libraries for
- # Sun compiler versions before 5.6, else PIC objects from an old
- # archive will be linked into the output, leading to subtle bugs.
- if test "$solaris_use_stlport4" != yes; then
- _LT_AC_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
- fi
- ;;
- esac
+*)
+ # fallback: assume linklib IS sharedlib
+ lt_cv_sharedlib_from_linklib_cmd="$ECHO"
;;
esac
])
-case " $_LT_AC_TAGVAR(postdeps, $1) " in
-*" -lc "*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;;
-esac
-])# AC_LIBTOOL_POSTDEP_PREDEP
+sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd
+test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO
-# AC_LIBTOOL_LANG_F77_CONFIG
-# --------------------------
-# Ensure that the configuration vars for the C compiler are
-# suitably defined. Those variables are subsequently used by
-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG], [_LT_AC_LANG_F77_CONFIG(F77)])
-AC_DEFUN([_LT_AC_LANG_F77_CONFIG],
-[AC_REQUIRE([AC_PROG_F77])
-AC_LANG_PUSH(Fortran 77)
+_LT_DECL([], [sharedlib_from_linklib_cmd], [1],
+ [Command to associate shared and link libraries])
+])# _LT_CHECK_SHAREDLIB_FROM_LINKLIB
-_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-_LT_AC_TAGVAR(allow_undefined_flag, $1)=
-_LT_AC_TAGVAR(always_export_symbols, $1)=no
-_LT_AC_TAGVAR(archive_expsym_cmds, $1)=
-_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
-_LT_AC_TAGVAR(hardcode_direct, $1)=no
-_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
-_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
-_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-_LT_AC_TAGVAR(hardcode_minus_L, $1)=no
-_LT_AC_TAGVAR(hardcode_automatic, $1)=no
-_LT_AC_TAGVAR(module_cmds, $1)=
-_LT_AC_TAGVAR(module_expsym_cmds, $1)=
-_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
-_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-_LT_AC_TAGVAR(no_undefined_flag, $1)=
-_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
-# Source file extension for f77 test sources.
-ac_ext=f
+# _LT_PATH_MANIFEST_TOOL
+# ----------------------
+# locate the manifest tool
+m4_defun([_LT_PATH_MANIFEST_TOOL],
+[AC_CHECK_TOOL(MANIFEST_TOOL, mt, :)
+test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt
+AC_CACHE_CHECK([if $MANIFEST_TOOL is a manifest tool], [lt_cv_path_mainfest_tool],
+ [lt_cv_path_mainfest_tool=no
+ echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&AS_MESSAGE_LOG_FD
+ $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ if $GREP 'Manifest Tool' conftest.out > /dev/null; then
+ lt_cv_path_mainfest_tool=yes
+ fi
+ rm -f conftest*])
+if test "x$lt_cv_path_mainfest_tool" != xyes; then
+ MANIFEST_TOOL=:
+fi
+_LT_DECL([], [MANIFEST_TOOL], [1], [Manifest tool])dnl
+])# _LT_PATH_MANIFEST_TOOL
-# Object file extension for compiled f77 test sources.
-objext=o
-_LT_AC_TAGVAR(objext, $1)=$objext
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="\
- subroutine t
- return
- end
-"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code="\
- program t
- end
-"
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_AC_SYS_COMPILER
-
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
-
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-CC=${F77-"f77"}
-compiler=$CC
-_LT_AC_TAGVAR(compiler, $1)=$CC
-_LT_CC_BASENAME([$compiler])
-
-AC_MSG_CHECKING([if libtool supports shared libraries])
-AC_MSG_RESULT([$can_build_shared])
-
-AC_MSG_CHECKING([whether to build shared libraries])
-test "$can_build_shared" = "no" && enable_shared=no
-
-# On AIX, shared libraries and static libraries use the same namespace, and
-# are all built from PIC.
-case $host_os in
-aix3*)
- test "$enable_shared" = yes && enable_static=no
- if test -n "$RANLIB"; then
- archive_cmds="$archive_cmds~\$RANLIB \$lib"
- postinstall_cmds='$RANLIB $lib'
- fi
+# LT_LIB_M
+# --------
+# check for math library
+AC_DEFUN([LT_LIB_M],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+LIBM=
+case $host in
+*-*-beos* | *-*-cegcc* | *-*-cygwin* | *-*-haiku* | *-*-pw32* | *-*-darwin*)
+ # These system don't have libm, or don't need it
;;
-aix[[4-9]]*)
- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
- test "$enable_shared" = yes && enable_static=no
- fi
+*-ncr-sysv4.3*)
+ AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
+ AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
;;
+*)
+ AC_CHECK_LIB(m, cos, LIBM="-lm")
+ ;;
esac
-AC_MSG_RESULT([$enable_shared])
+AC_SUBST([LIBM])
+])# LT_LIB_M
-AC_MSG_CHECKING([whether to build static libraries])
-# Make sure either enable_shared or enable_static is yes.
-test "$enable_shared" = yes || enable_static=yes
-AC_MSG_RESULT([$enable_static])
+# Old name:
+AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_CHECK_LIBM], [])
-_LT_AC_TAGVAR(GCC, $1)="$G77"
-_LT_AC_TAGVAR(LD, $1)="$LD"
-AC_LIBTOOL_PROG_COMPILER_PIC($1)
-AC_LIBTOOL_PROG_CC_C_O($1)
-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
-AC_LIBTOOL_PROG_LD_SHLIBS($1)
-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
+# _LT_COMPILER_NO_RTTI([TAGNAME])
+# -------------------------------
+m4_defun([_LT_COMPILER_NO_RTTI],
+[m4_require([_LT_TAG_COMPILER])dnl
-AC_LIBTOOL_CONFIG($1)
+_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
-AC_LANG_POP
-CC="$lt_save_CC"
-])# AC_LIBTOOL_LANG_F77_CONFIG
-
-
-# AC_LIBTOOL_LANG_GCJ_CONFIG
-# --------------------------
-# Ensure that the configuration vars for the C compiler are
-# suitably defined. Those variables are subsequently used by
-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG], [_LT_AC_LANG_GCJ_CONFIG(GCJ)])
-AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG],
-[AC_LANG_SAVE
-
-# Source file extension for Java test sources.
-ac_ext=java
-
-# Object file extension for compiled Java test sources.
-objext=o
-_LT_AC_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="class foo {}"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }'
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_AC_SYS_COMPILER
-
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
-
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-CC=${GCJ-"gcj"}
-compiler=$CC
-_LT_AC_TAGVAR(compiler, $1)=$CC
-_LT_CC_BASENAME([$compiler])
-
-# GCJ did not exist at the time GCC didn't implicitly link libc in.
-_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-
-_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-
-AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
-AC_LIBTOOL_PROG_COMPILER_PIC($1)
-AC_LIBTOOL_PROG_CC_C_O($1)
-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
-AC_LIBTOOL_PROG_LD_SHLIBS($1)
-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
-
-AC_LIBTOOL_CONFIG($1)
-
-AC_LANG_RESTORE
-CC="$lt_save_CC"
-])# AC_LIBTOOL_LANG_GCJ_CONFIG
-
-
-# AC_LIBTOOL_LANG_RC_CONFIG
-# -------------------------
-# Ensure that the configuration vars for the Windows resource compiler are
-# suitably defined. Those variables are subsequently used by
-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG], [_LT_AC_LANG_RC_CONFIG(RC)])
-AC_DEFUN([_LT_AC_LANG_RC_CONFIG],
-[AC_LANG_SAVE
-
-# Source file extension for RC test sources.
-ac_ext=rc
-
-# Object file extension for compiled RC test sources.
-objext=o
-_LT_AC_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
-
-# Code to be used in simple link tests
-lt_simple_link_test_code="$lt_simple_compile_test_code"
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_AC_SYS_COMPILER
-
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
-
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-CC=${RC-"windres"}
-compiler=$CC
-_LT_AC_TAGVAR(compiler, $1)=$CC
-_LT_CC_BASENAME([$compiler])
-_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
-
-AC_LIBTOOL_CONFIG($1)
-
-AC_LANG_RESTORE
-CC="$lt_save_CC"
-])# AC_LIBTOOL_LANG_RC_CONFIG
-
-
-# AC_LIBTOOL_CONFIG([TAGNAME])
-# ----------------------------
-# If TAGNAME is not passed, then create an initial libtool script
-# with a default configuration from the untagged config vars. Otherwise
-# add code to config.status for appending the configuration named by
-# TAGNAME from the matching tagged config vars.
-AC_DEFUN([AC_LIBTOOL_CONFIG],
-[# The else clause should only fire when bootstrapping the
-# libtool distribution, otherwise you forgot to ship ltmain.sh
-# with your package, and you will get complaints that there are
-# no rules to generate ltmain.sh.
-if test -f "$ltmain"; then
- # See if we are running on zsh, and set the options which allow our commands through
- # without removal of \ escapes.
- if test -n "${ZSH_VERSION+set}" ; then
- setopt NO_GLOB_SUBST
- fi
- # Now quote all the things that may contain metacharacters while being
- # careful not to overquote the AC_SUBSTed values. We take copies of the
- # variables and quote the copies for generation of the libtool script.
- for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
- SED SHELL STRIP \
- libname_spec library_names_spec soname_spec extract_expsyms_cmds \
- old_striplib striplib file_magic_cmd finish_cmds finish_eval \
- deplibs_check_method reload_flag reload_cmds need_locks \
- lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
- lt_cv_sys_global_symbol_to_c_name_address \
- sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
- old_postinstall_cmds old_postuninstall_cmds \
- _LT_AC_TAGVAR(compiler, $1) \
- _LT_AC_TAGVAR(CC, $1) \
- _LT_AC_TAGVAR(LD, $1) \
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1) \
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1) \
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1) \
- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) \
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1) \
- _LT_AC_TAGVAR(thread_safe_flag_spec, $1) \
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1) \
- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1) \
- _LT_AC_TAGVAR(old_archive_cmds, $1) \
- _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) \
- _LT_AC_TAGVAR(predep_objects, $1) \
- _LT_AC_TAGVAR(postdep_objects, $1) \
- _LT_AC_TAGVAR(predeps, $1) \
- _LT_AC_TAGVAR(postdeps, $1) \
- _LT_AC_TAGVAR(compiler_lib_search_path, $1) \
- _LT_AC_TAGVAR(compiler_lib_search_dirs, $1) \
- _LT_AC_TAGVAR(archive_cmds, $1) \
- _LT_AC_TAGVAR(archive_expsym_cmds, $1) \
- _LT_AC_TAGVAR(postinstall_cmds, $1) \
- _LT_AC_TAGVAR(postuninstall_cmds, $1) \
- _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) \
- _LT_AC_TAGVAR(allow_undefined_flag, $1) \
- _LT_AC_TAGVAR(no_undefined_flag, $1) \
- _LT_AC_TAGVAR(export_symbols_cmds, $1) \
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) \
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) \
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1) \
- _LT_AC_TAGVAR(hardcode_automatic, $1) \
- _LT_AC_TAGVAR(module_cmds, $1) \
- _LT_AC_TAGVAR(module_expsym_cmds, $1) \
- _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) \
- _LT_AC_TAGVAR(fix_srcfile_path, $1) \
- _LT_AC_TAGVAR(exclude_expsyms, $1) \
- _LT_AC_TAGVAR(include_expsyms, $1); do
-
- case $var in
- _LT_AC_TAGVAR(old_archive_cmds, $1) | \
- _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) | \
- _LT_AC_TAGVAR(archive_cmds, $1) | \
- _LT_AC_TAGVAR(archive_expsym_cmds, $1) | \
- _LT_AC_TAGVAR(module_cmds, $1) | \
- _LT_AC_TAGVAR(module_expsym_cmds, $1) | \
- _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) | \
- _LT_AC_TAGVAR(export_symbols_cmds, $1) | \
- extract_expsyms_cmds | reload_cmds | finish_cmds | \
- postinstall_cmds | postuninstall_cmds | \
- old_postinstall_cmds | old_postuninstall_cmds | \
- sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
- # Double-quote double-evaled strings.
- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
- ;;
- *)
- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
- ;;
- esac
- done
-
- case $lt_echo in
- *'\[$]0 --fallback-echo"')
- lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\[$]0 --fallback-echo"[$]/[$]0 --fallback-echo"/'`
- ;;
+if test "$GCC" = yes; then
+ case $cc_basename in
+ nvcc*)
+ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -Xcompiler -fno-builtin' ;;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' ;;
esac
-ifelse([$1], [],
- [cfgfile="${ofile}T"
- trap "$rm \"$cfgfile\"; exit 1" 1 2 15
- $rm -f "$cfgfile"
- AC_MSG_NOTICE([creating $ofile])],
- [cfgfile="$ofile"])
-
- cat <<__EOF__ >> "$cfgfile"
-ifelse([$1], [],
-[#! $SHELL
-
-# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
-# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
-# NOTE: Changes made to this file will be lost: look at ltmain.sh.
-#
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
-# Free Software Foundation, Inc.
-#
-# This file is part of GNU Libtool:
-# Originally by Gordon Matzigkeit <gord at gnu.ai.mit.edu>, 1996
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# A sed program that does not truncate output.
-SED=$lt_SED
-
-# Sed that helps us avoid accidentally triggering echo(1) options like -n.
-Xsed="$SED -e 1s/^X//"
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-# The names of the tagged configurations supported by this script.
-available_tags=
-
-# ### BEGIN LIBTOOL CONFIG],
-[# ### BEGIN LIBTOOL TAG CONFIG: $tagname])
-
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-
-# Shell to use when invoking shell scripts.
-SHELL=$lt_SHELL
-
-# Whether or not to build shared libraries.
-build_libtool_libs=$enable_shared
-
-# Whether or not to build static libraries.
-build_old_libs=$enable_static
-
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)
-
-# Whether or not to disallow shared libs when runtime libs are static
-allow_libtool_libs_with_static_runtimes=$_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)
-
-# Whether or not to optimize for fast installation.
-fast_install=$enable_fast_install
-
-# The host system.
-host_alias=$host_alias
-host=$host
-host_os=$host_os
-
-# The build system.
-build_alias=$build_alias
-build=$build
-build_os=$build_os
-
-# An echo program that does not interpret backslashes.
-echo=$lt_echo
-
-# The archiver.
-AR=$lt_AR
-AR_FLAGS=$lt_AR_FLAGS
-
-# A C compiler.
-LTCC=$lt_LTCC
-
-# LTCC compiler flags.
-LTCFLAGS=$lt_LTCFLAGS
-
-# A language-specific compiler.
-CC=$lt_[]_LT_AC_TAGVAR(compiler, $1)
-
-# Is the compiler the GNU C compiler?
-with_gcc=$_LT_AC_TAGVAR(GCC, $1)
-
-# An ERE matcher.
-EGREP=$lt_EGREP
-
-# The linker used to build libraries.
-LD=$lt_[]_LT_AC_TAGVAR(LD, $1)
-
-# Whether we need hard or soft links.
-LN_S=$lt_LN_S
-
-# A BSD-compatible nm program.
-NM=$lt_NM
-
-# A symbol stripping program
-STRIP=$lt_STRIP
-
-# Used to examine libraries when file_magic_cmd begins "file"
-MAGIC_CMD=$MAGIC_CMD
-
-# Used on cygwin: DLL creation program.
-DLLTOOL="$DLLTOOL"
-
-# Used on cygwin: object dumper.
-OBJDUMP="$OBJDUMP"
-
-# Used on cygwin: assembler.
-AS="$AS"
-
-# The name of the directory that contains temporary libtool files.
-objdir=$objdir
-
-# How to create reloadable object files.
-reload_flag=$lt_reload_flag
-reload_cmds=$lt_reload_cmds
-
-# How to pass a linker flag through the compiler.
-wl=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
-
-# Object file suffix (normally "o").
-objext="$ac_objext"
-
-# Old archive suffix (normally "a").
-libext="$libext"
-
-# Shared library suffix (normally ".so").
-shrext_cmds='$shrext_cmds'
-
-# Executable file suffix (normally "").
-exeext="$exeext"
-
-# Additional compiler flags for building library objects.
-pic_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)
-pic_mode=$pic_mode
-
-# What is the maximum length of a command?
-max_cmd_len=$lt_cv_sys_max_cmd_len
-
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)
-
-# Must we lock files when doing compilation?
-need_locks=$lt_need_locks
-
-# Do we need the lib prefix for modules?
-need_lib_prefix=$need_lib_prefix
-
-# Do we need a version for libraries?
-need_version=$need_version
-
-# Whether dlopen is supported.
-dlopen_support=$enable_dlopen
-
-# Whether dlopen of programs is supported.
-dlopen_self=$enable_dlopen_self
-
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=$enable_dlopen_self_static
-
-# Compiler flag to prevent dynamic linking.
-link_static_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_static, $1)
-
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)
-
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec=$lt_[]_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)
-
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec=$lt_[]_LT_AC_TAGVAR(whole_archive_flag_spec, $1)
-
-# Compiler flag to generate thread-safe objects.
-thread_safe_flag_spec=$lt_[]_LT_AC_TAGVAR(thread_safe_flag_spec, $1)
-
-# Library versioning type.
-version_type=$version_type
-
-# Format of library name prefix.
-libname_spec=$lt_libname_spec
-
-# List of archive names. First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME.
-library_names_spec=$lt_library_names_spec
-
-# The coded name of the library, if different from the real name.
-soname_spec=$lt_soname_spec
-
-# Commands used to build and install an old-style archive.
-RANLIB=$lt_RANLIB
-old_archive_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_cmds, $1)
-old_postinstall_cmds=$lt_old_postinstall_cmds
-old_postuninstall_cmds=$lt_old_postuninstall_cmds
-
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_new_cmds, $1)
-
-# Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)
-
-# Commands used to build and install a shared archive.
-archive_cmds=$lt_[]_LT_AC_TAGVAR(archive_cmds, $1)
-archive_expsym_cmds=$lt_[]_LT_AC_TAGVAR(archive_expsym_cmds, $1)
-postinstall_cmds=$lt_postinstall_cmds
-postuninstall_cmds=$lt_postuninstall_cmds
-
-# Commands used to build a loadable module (assumed same as above if empty)
-module_cmds=$lt_[]_LT_AC_TAGVAR(module_cmds, $1)
-module_expsym_cmds=$lt_[]_LT_AC_TAGVAR(module_expsym_cmds, $1)
-
-# Commands to strip libraries.
-old_striplib=$lt_old_striplib
-striplib=$lt_striplib
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predep_objects=$lt_[]_LT_AC_TAGVAR(predep_objects, $1)
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdep_objects=$lt_[]_LT_AC_TAGVAR(postdep_objects, $1)
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predeps=$lt_[]_LT_AC_TAGVAR(predeps, $1)
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdeps=$lt_[]_LT_AC_TAGVAR(postdeps, $1)
-
-# The directories searched by this compiler when creating a shared
-# library
-compiler_lib_search_dirs=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_dirs, $1)
-
-# The library search path used internally by the compiler when linking
-# a shared library.
-compiler_lib_search_path=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1)
-
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method=$lt_deplibs_check_method
-
-# Command to use when deplibs_check_method == file_magic.
-file_magic_cmd=$lt_file_magic_cmd
-
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=$lt_[]_LT_AC_TAGVAR(allow_undefined_flag, $1)
-
-# Flag that forces no undefined symbols.
-no_undefined_flag=$lt_[]_LT_AC_TAGVAR(no_undefined_flag, $1)
-
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds=$lt_finish_cmds
-
-# Same as above, but a single script fragment to be evaled but not shown.
-finish_eval=$lt_finish_eval
-
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-
-# Transform the output of nm in a proper C declaration
-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-
-# Transform the output of nm in a C name address pair
-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-
-# This is the shared library runtime path variable.
-runpath_var=$runpath_var
-
-# This is the shared library path variable.
-shlibpath_var=$shlibpath_var
-
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-
-# How to hardcode a shared library path into an executable.
-hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1)
-
-# Whether we should hardcode library paths into libraries.
-hardcode_into_libs=$hardcode_into_libs
-
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)
-
-# If ld is used when linking, flag to hardcode \$libdir into
-# a binary during linking. This must work even if \$libdir does
-# not exist.
-hardcode_libdir_flag_spec_ld=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)
-
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1)
-
-# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct=$_LT_AC_TAGVAR(hardcode_direct, $1)
-
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L=$_LT_AC_TAGVAR(hardcode_minus_L, $1)
-
-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-# the resulting binary.
-hardcode_shlibpath_var=$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)
-
-# Set to yes if building a shared library automatically hardcodes DIR into the library
-# and all subsequent libraries and executables linked against it.
-hardcode_automatic=$_LT_AC_TAGVAR(hardcode_automatic, $1)
-
-# Variables whose values should be saved in libtool wrapper scripts and
-# restored at relink time.
-variables_saved_for_relink="$variables_saved_for_relink"
-
-# Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=$_LT_AC_TAGVAR(link_all_deplibs, $1)
-
-# Compile-time system search path for libraries
-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-
-# Run-time system search path for libraries
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-
-# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path=$lt_fix_srcfile_path
-
-# Set to yes if exported symbols are required.
-always_export_symbols=$_LT_AC_TAGVAR(always_export_symbols, $1)
-
-# The commands to list exported symbols.
-export_symbols_cmds=$lt_[]_LT_AC_TAGVAR(export_symbols_cmds, $1)
-
-# The commands to extract the exported symbol list from a shared archive.
-extract_expsyms_cmds=$lt_extract_expsyms_cmds
-
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms=$lt_[]_LT_AC_TAGVAR(exclude_expsyms, $1)
-
-# Symbols that must always be exported.
-include_expsyms=$lt_[]_LT_AC_TAGVAR(include_expsyms, $1)
-
-ifelse([$1],[],
-[# ### END LIBTOOL CONFIG],
-[# ### END LIBTOOL TAG CONFIG: $tagname])
-
-__EOF__
-
-ifelse([$1],[], [
- case $host_os in
- aix3*)
- cat <<\EOF >> "$cfgfile"
-
-# AIX sometimes has problems with the GCC collect2 program. For some
-# reason, if we set the COLLECT_NAMES environment variable, the problems
-# vanish in a puff of smoke.
-if test "X${COLLECT_NAMES+set}" != Xset; then
- COLLECT_NAMES=
- export COLLECT_NAMES
-fi
-EOF
- ;;
- esac
-
- # We use sed instead of cat because bash on DJGPP gets confused if
- # if finds mixed CR/LF and LF-only lines. Since sed operates in
- # text mode, it properly converts lines to CR/LF. This bash problem
- # is reportedly fixed, but why not run on old versions too?
- sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1)
-
- mv -f "$cfgfile" "$ofile" || \
- (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
- chmod +x "$ofile"
-])
-else
- # If there is no Makefile yet, we rely on a make rule to execute
- # `config.status --recheck' to rerun these tests and create the
- # libtool script then.
- ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
- if test -f "$ltmain_in"; then
- test -f Makefile && make "$ltmain"
- fi
-fi
-])# AC_LIBTOOL_CONFIG
-
-
-# AC_LIBTOOL_PROG_COMPILER_NO_RTTI([TAGNAME])
-# -------------------------------------------
-AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI],
-[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
-
-_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
-
-if test "$GCC" = yes; then
- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
-
- AC_LIBTOOL_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
+ _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
lt_cv_prog_compiler_rtti_exceptions,
[-fno-rtti -fno-exceptions], [],
- [_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
+ [_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
fi
-])# AC_LIBTOOL_PROG_COMPILER_NO_RTTI
+_LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1],
+ [Compiler flag to turn off builtin functions])
+])# _LT_COMPILER_NO_RTTI
-# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
-# ---------------------------------
-AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE],
-[AC_REQUIRE([AC_CANONICAL_HOST])
-AC_REQUIRE([LT_AC_PROG_SED])
-AC_REQUIRE([AC_PROG_NM])
-AC_REQUIRE([AC_OBJEXT])
+# _LT_CMD_GLOBAL_SYMBOLS
+# ----------------------
+m4_defun([_LT_CMD_GLOBAL_SYMBOLS],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_PROG_AWK])dnl
+AC_REQUIRE([LT_PATH_NM])dnl
+AC_REQUIRE([LT_PATH_LD])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_TAG_COMPILER])dnl
+
# Check for command to grab the raw symbol name followed by C symbol from nm.
AC_MSG_CHECKING([command to parse $NM output from $compiler object])
AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe],
@@ -4812,34 +3644,19 @@
# Regexp to match symbols that can be accessed directly from C.
sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
-# Transform an extracted symbol line into a proper C declaration
-lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'"
-
-# Transform an extracted symbol line into symbol name and symbol address
-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
-
# Define system-specific variables.
case $host_os in
aix*)
symcode='[[BCDT]]'
;;
-cygwin* | mingw* | pw32*)
+cygwin* | mingw* | pw32* | cegcc*)
symcode='[[ABCDGISTW]]'
;;
-hpux*) # Its linker distinguishes data from code symbols
+hpux*)
if test "$host_cpu" = ia64; then
symcode='[[ABCDEGRST]]'
fi
- lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
- lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
;;
-linux* | k*bsd*-gnu)
- if test "$host_cpu" = ia64; then
- symcode='[[ABCDGIRSTW]]'
- lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
- lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
- fi
- ;;
irix* | nonstopux*)
symcode='[[BCDEGRST]]'
;;
@@ -4863,21 +3680,30 @@
;;
esac
+# If we're using GNU nm, then use its standard symbol codes.
+case `$NM -V 2>&1` in
+*GNU* | *'with BFD'*)
+ symcode='[[ABCDGIRSTW]]' ;;
+esac
+
+# Transform an extracted symbol line into a proper C declaration.
+# Some systems (esp. on ia64) link data and code symbols differently,
+# so use this general approach.
+lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+
+# Transform an extracted symbol line into symbol name and symbol address
+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"lib\2\", (void *) \&\2},/p'"
+
# Handle CRLF in mingw tool chain
opt_cr=
case $build_os in
mingw*)
- opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+ opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
;;
esac
-# If we're using GNU nm, then use its standard symbol codes.
-case `$NM -V 2>&1` in
-*GNU* | *'with BFD'*)
- symcode='[[ABCDGIRSTW]]' ;;
-esac
-
-# Try without a prefix undercore, then with it.
+# Try without a prefix underscore, then with it.
for ac_symprfx in "" "_"; do
# Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
@@ -4884,28 +3710,49 @@
symxfrm="\\1 $ac_symprfx\\2 \\2"
# Write the raw and C identifiers.
- lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+ if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+ # Fake it for dumpbin and say T for any non-static function
+ # and D for any global variable.
+ # Also find C++ and __fastcall symbols from MSVC++,
+ # which start with @ or ?.
+ lt_cv_sys_global_symbol_pipe="$AWK ['"\
+" {last_section=section; section=\$ 3};"\
+" /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\
+" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
+" \$ 0!~/External *\|/{next};"\
+" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
+" {if(hide[section]) next};"\
+" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
+" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
+" s[1]~/^[@?]/{print s[1], s[1]; next};"\
+" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
+" ' prfx=^$ac_symprfx]"
+ else
+ lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+ fi
+ lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'"
# Check to see that the pipe works correctly.
pipe_works=no
rm -f conftest*
- cat > conftest.$ac_ext <<EOF
+ cat > conftest.$ac_ext <<_LT_EOF
#ifdef __cplusplus
extern "C" {
#endif
char nm_test_var;
-void nm_test_func(){}
+void nm_test_func(void);
+void nm_test_func(void){}
#ifdef __cplusplus
}
#endif
int main(){nm_test_var='a';nm_test_func();return(0);}
-EOF
+_LT_EOF
if AC_TRY_EVAL(ac_compile); then
# Now try to grab the symbols.
nlist=conftest.nm
- if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then
+ if AC_TRY_EVAL(NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) && test -s "$nlist"; then
# Try sorting and uniquifying the output.
if sort "$nlist" | uniq > "$nlist"T; then
mv -f "$nlist"T "$nlist"
@@ -4914,53 +3761,67 @@
fi
# Make sure that we snagged all the symbols we need.
- if grep ' nm_test_var$' "$nlist" >/dev/null; then
- if grep ' nm_test_func$' "$nlist" >/dev/null; then
- cat <<EOF > conftest.$ac_ext
+ if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
+ if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
+ cat <<_LT_EOF > conftest.$ac_ext
+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */
+#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
+/* DATA imports from DLLs on WIN32 con't be const, because runtime
+ relocations are performed -- see ld's documentation on pseudo-relocs. */
+# define LT@&t at _DLSYM_CONST
+#elif defined(__osf__)
+/* This system does not cope well with relocations in const data. */
+# define LT@&t at _DLSYM_CONST
+#else
+# define LT@&t at _DLSYM_CONST const
+#endif
+
#ifdef __cplusplus
extern "C" {
#endif
-EOF
+_LT_EOF
# Now generate the symbol file.
- eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext'
+ eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
- cat <<EOF >> conftest.$ac_ext
-#if defined (__STDC__) && __STDC__
-# define lt_ptr_t void *
-#else
-# define lt_ptr_t char *
-# define const
-#endif
+ cat <<_LT_EOF >> conftest.$ac_ext
-/* The mapping between symbol names and symbols. */
-const struct {
+/* The mapping between symbol names and symbols. */
+LT@&t at _DLSYM_CONST struct {
const char *name;
- lt_ptr_t address;
+ void *address;
}
-lt_preloaded_symbols[[]] =
+lt__PROGRAM__LTX_preloaded_symbols[[]] =
{
-EOF
- $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext
- cat <<\EOF >> conftest.$ac_ext
- {0, (lt_ptr_t) 0}
+ { "@PROGRAM@", (void *) 0 },
+_LT_EOF
+ $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
+ cat <<\_LT_EOF >> conftest.$ac_ext
+ {0, (void *) 0}
};
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+ return lt__PROGRAM__LTX_preloaded_symbols;
+}
+#endif
+
#ifdef __cplusplus
}
#endif
-EOF
+_LT_EOF
# Now try linking the two files.
mv conftest.$ac_objext conftstm.$ac_objext
- lt_save_LIBS="$LIBS"
- lt_save_CFLAGS="$CFLAGS"
+ lt_globsym_save_LIBS=$LIBS
+ lt_globsym_save_CFLAGS=$CFLAGS
LIBS="conftstm.$ac_objext"
- CFLAGS="$CFLAGS$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
+ CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
pipe_works=yes
fi
- LIBS="$lt_save_LIBS"
- CFLAGS="$lt_save_CFLAGS"
+ LIBS=$lt_globsym_save_LIBS
+ CFLAGS=$lt_globsym_save_CFLAGS
else
echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
fi
@@ -4992,22 +3853,42 @@
else
AC_MSG_RESULT(ok)
fi
-]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
+# Response file support.
+if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+ nm_file_list_spec='@'
+elif $NM --help 2>/dev/null | grep '[[@]]FILE' >/dev/null; then
+ nm_file_list_spec='@'
+fi
-# AC_LIBTOOL_PROG_COMPILER_PIC([TAGNAME])
-# ---------------------------------------
-AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC],
-[_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)=
-_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=
+_LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1],
+ [Take the output of nm and produce a listing of raw symbols and C names])
+_LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1],
+ [Transform the output of nm in a proper C declaration])
+_LT_DECL([global_symbol_to_c_name_address],
+ [lt_cv_sys_global_symbol_to_c_name_address], [1],
+ [Transform the output of nm in a C name address pair])
+_LT_DECL([global_symbol_to_c_name_address_lib_prefix],
+ [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1],
+ [Transform the output of nm in a C name address pair when lib prefix is needed])
+_LT_DECL([], [nm_file_list_spec], [1],
+ [Specify filename containing input files for $NM])
+]) # _LT_CMD_GLOBAL_SYMBOLS
-AC_MSG_CHECKING([for $compiler option to produce PIC])
- ifelse([$1],[CXX],[
+
+# _LT_COMPILER_PIC([TAGNAME])
+# ---------------------------
+m4_defun([_LT_COMPILER_PIC],
+[m4_require([_LT_TAG_COMPILER])dnl
+_LT_TAGVAR(lt_prog_compiler_wl, $1)=
+_LT_TAGVAR(lt_prog_compiler_pic, $1)=
+_LT_TAGVAR(lt_prog_compiler_static, $1)=
+
+m4_if([$1], [CXX], [
# C++ specific cases for pic, static, wl, etc.
if test "$GXX" = yes; then
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
case $host_os in
aix*)
@@ -5014,35 +3895,50 @@
# All AIX code is PIC.
if test "$host_cpu" = ia64; then
# AIX 5 now supports IA64 processor
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
fi
;;
+
amigaos*)
- # FIXME: we need at least 68020 code to build shared libraries, but
- # adding the `-m68020' flag to GCC prevents building anything better,
- # like `-m68040'.
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+ m68k)
+ # FIXME: we need at least 68020 code to build shared libraries, but
+ # adding the `-m68020' flag to GCC prevents building anything better,
+ # like `-m68040'.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
+ ;;
+ esac
;;
+
beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
# PIC is the default for these OSes.
;;
- mingw* | cygwin* | os2* | pw32*)
+ mingw* | cygwin* | os2* | pw32* | cegcc*)
# This hack is so that the source file can tell whether it is being
# built for inclusion in a dll (and should export symbols for example).
# Although the cygwin gcc ignores -fPIC, still need this for old-style
# (--disable-auto-import) libraries
m4_if([$1], [GCJ], [],
- [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+ [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
;;
darwin* | rhapsody*)
# PIC is the default on this platform
# Common symbols not allowed in MH_DYLIB files
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
;;
*djgpp*)
# DJGPP does not support shared libraries at all
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)=
;;
+ haiku*)
+ # PIC is the default for Haiku.
+ # The "-static" flag exists, but is broken.
+ _LT_TAGVAR(lt_prog_compiler_static, $1)=
+ ;;
interix[[3-9]]*)
# Interix 3.x gcc -fpic/-fPIC options generate broken code.
# Instead, we relocate shared libraries at runtime.
@@ -5049,22 +3945,28 @@
;;
sysv4*MP*)
if test -d /usr/nec; then
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
fi
;;
hpux*)
- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
- # not for PA HP-UX.
+ # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+ # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag
+ # sets the default TLS model and affects inlining.
case $host_cpu in
- hppa*64*|ia64*)
+ hppa*64*)
;;
*)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
;;
esac
;;
+ *qnx* | *nto*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+ ;;
*)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
;;
esac
else
@@ -5073,9 +3975,9 @@
# All AIX code is PIC.
if test "$host_cpu" = ia64; then
# AIX 5 now supports IA64 processor
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
else
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
fi
;;
chorus*)
@@ -5082,28 +3984,24 @@
case $cc_basename in
cxch68*)
# Green Hills C++ Compiler
- # _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
+ # _LT_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
;;
esac
;;
- darwin*)
- # PIC is the default on this platform
- # Common symbols not allowed in MH_DYLIB files
- case $cc_basename in
- xlc*)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon'
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- ;;
- esac
- ;;
+ mingw* | cygwin* | os2* | pw32* | cegcc*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ m4_if([$1], [GCJ], [],
+ [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+ ;;
dgux*)
case $cc_basename in
ec++*)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
;;
ghcx*)
# Green Hills C++ Compiler
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
;;
*)
;;
@@ -5115,21 +4013,21 @@
hpux9* | hpux10* | hpux11*)
case $cc_basename in
CC*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
if test "$host_cpu" != ia64; then
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
fi
;;
aCC*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
case $host_cpu in
hppa*64*|ia64*)
# +Z the default
;;
*)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
;;
esac
;;
@@ -5144,8 +4042,8 @@
irix5* | irix6* | nonstopux*)
case $cc_basename in
CC*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
# CC pic flag -KPIC is the default.
;;
*)
@@ -5152,39 +4050,52 @@
;;
esac
;;
- linux* | k*bsd*-gnu)
+ linux* | k*bsd*-gnu | kopensolaris*-gnu)
case $cc_basename in
KCC*)
# KAI C++ Compiler
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
;;
- icpc* | ecpc*)
- # Intel C++
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
+ ecpc* )
+ # old Intel C++ for x86_64 which still supported -KPIC.
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
;;
+ icpc* )
+ # Intel C++, used to be incompatible with GCC.
+ # ICC 10 doesn't accept -KPIC any more.
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+ ;;
pgCC* | pgcpp*)
- # Portland Group C++ compiler.
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ # Portland Group C++ compiler
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
;;
cxx*)
# Compaq C++
# Make sure the PIC flag is empty. It appears that all Alpha
# Linux and Compaq Tru64 Unix objects are PIC.
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
;;
+ xlc* | xlC* | bgxl[[cC]]* | mpixl[[cC]]*)
+ # IBM XL 8.0, 9.0 on PPC and BlueGene
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
+ ;;
*)
case `$CC -V 2>&1 | sed 5q` in
*Sun\ C*)
# Sun C++ 5.9
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
;;
esac
;;
@@ -5197,7 +4108,7 @@
mvs*)
case $cc_basename in
cxx*)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
;;
*)
;;
@@ -5205,22 +4116,27 @@
;;
netbsd*)
;;
+ *qnx* | *nto*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+ ;;
osf3* | osf4* | osf5*)
case $cc_basename in
KCC*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
;;
RCC*)
# Rational C++ 2.4.1
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
;;
cxx*)
# Digital/Compaq C++
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
# Make sure the PIC flag is empty. It appears that all Alpha
# Linux and Compaq Tru64 Unix objects are PIC.
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
;;
*)
;;
@@ -5230,15 +4146,15 @@
;;
solaris*)
case $cc_basename in
- CC*)
+ CC* | sunCC*)
# Sun C++ 4.2, 5.x and Centerline C++
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
;;
gcx*)
# Green Hills C++ Compiler
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
;;
*)
;;
@@ -5248,40 +4164,40 @@
case $cc_basename in
CC*)
# Sun C++ 4.x
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
;;
lcc*)
# Lucid
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
;;
*)
;;
esac
;;
+ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+ case $cc_basename in
+ CC*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+ esac
+ ;;
tandem*)
case $cc_basename in
NCC*)
# NonStop-UX NCC 3.20
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
;;
*)
;;
esac
;;
- sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
- case $cc_basename in
- CC*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- ;;
- esac
- ;;
vxworks*)
;;
*)
- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
;;
esac
fi
@@ -5288,8 +4204,8 @@
],
[
if test "$GCC" = yes; then
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
case $host_os in
aix*)
@@ -5296,15 +4212,23 @@
# All AIX code is PIC.
if test "$host_cpu" = ia64; then
# AIX 5 now supports IA64 processor
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
fi
;;
amigaos*)
- # FIXME: we need at least 68020 code to build shared libraries, but
- # adding the `-m68020' flag to GCC prevents building anything better,
- # like `-m68040'.
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+ m68k)
+ # FIXME: we need at least 68020 code to build shared libraries, but
+ # adding the `-m68020' flag to GCC prevents building anything better,
+ # like `-m68040'.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
+ ;;
+ esac
;;
beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
@@ -5311,21 +4235,41 @@
# PIC is the default for these OSes.
;;
- mingw* | cygwin* | pw32* | os2*)
+ mingw* | cygwin* | pw32* | os2* | cegcc*)
# This hack is so that the source file can tell whether it is being
# built for inclusion in a dll (and should export symbols for example).
# Although the cygwin gcc ignores -fPIC, still need this for old-style
# (--disable-auto-import) libraries
m4_if([$1], [GCJ], [],
- [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+ [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
;;
darwin* | rhapsody*)
# PIC is the default on this platform
# Common symbols not allowed in MH_DYLIB files
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
;;
+ haiku*)
+ # PIC is the default for Haiku.
+ # The "-static" flag exists, but is broken.
+ _LT_TAGVAR(lt_prog_compiler_static, $1)=
+ ;;
+
+ hpux*)
+ # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+ # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag
+ # sets the default TLS model and affects inlining.
+ case $host_cpu in
+ hppa*64*)
+ # +Z the default
+ ;;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+ esac
+ ;;
+
interix[[3-9]]*)
# Interix 3.x gcc -fpic/-fPIC options generate broken code.
# Instead, we relocate shared libraries at runtime.
@@ -5334,31 +4278,33 @@
msdosdjgpp*)
# Just because we use GCC doesn't mean we suddenly get shared libraries
# on systems that don't support them.
- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
enable_shared=no
;;
+ *nto* | *qnx*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+ ;;
+
sysv4*MP*)
if test -d /usr/nec; then
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
fi
;;
- hpux*)
- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
- # not for PA HP-UX.
- case $host_cpu in
- hppa*64*|ia64*)
- # +Z the default
- ;;
- *)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
- ;;
- esac
+ *)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
;;
+ esac
- *)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ case $cc_basename in
+ nvcc*) # Cuda Compiler Driver 2.2
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Xlinker '
+ if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)="-Xcompiler $_LT_TAGVAR(lt_prog_compiler_pic, $1)"
+ fi
;;
esac
else
@@ -5365,34 +4311,24 @@
# PORTME Check for flag to pass linker flags through the system compiler.
case $host_os in
aix*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
if test "$host_cpu" = ia64; then
# AIX 5 now supports IA64 processor
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
else
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
fi
;;
- darwin*)
- # PIC is the default on this platform
- # Common symbols not allowed in MH_DYLIB files
- case $cc_basename in
- xlc*)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon'
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- ;;
- esac
- ;;
- mingw* | cygwin* | pw32* | os2*)
+ mingw* | cygwin* | pw32* | os2* | cegcc*)
# This hack is so that the source file can tell whether it is being
# built for inclusion in a dll (and should export symbols for example).
m4_if([$1], [GCJ], [],
- [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+ [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
;;
hpux9* | hpux10* | hpux11*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
# PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
# not for PA HP-UX.
case $host_cpu in
@@ -5400,222 +4336,298 @@
# +Z the default
;;
*)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
;;
esac
# Is there a better lt_prog_compiler_static that works with the bundled CC?
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
;;
irix5* | irix6* | nonstopux*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
# PIC (with -KPIC) is the default.
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
;;
- newsos6)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- ;;
-
- linux* | k*bsd*-gnu)
+ linux* | k*bsd*-gnu | kopensolaris*-gnu)
case $cc_basename in
- icc* | ecc*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
+ # old Intel for x86_64 which still supported -KPIC.
+ ecc*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
;;
- pgcc* | pgf77* | pgf90* | pgf95*)
+ # icc used to be incompatible with GCC.
+ # ICC 10 doesn't accept -KPIC any more.
+ icc* | ifort*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+ ;;
+ # Lahey Fortran 8.1.
+ lf95*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='--static'
+ ;;
+ nagfor*)
+ # NAG Fortran compiler
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+ pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
# Portland Group compilers (*not* the Pentium gcc compiler,
# which looks to be a dead project)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
;;
ccc*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
# All Alpha code is PIC.
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
;;
+ xl* | bgxl* | bgf* | mpixl*)
+ # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
+ ;;
*)
- case `$CC -V 2>&1 | sed 5q` in
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [[1-7]].* | *Sun*Fortran*\ 8.[[0-3]]*)
+ # Sun Fortran 8.3 passes all unrecognized flags to the linker
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)=''
+ ;;
+ *Sun\ F* | *Sun*Fortran*)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+ ;;
*Sun\ C*)
# Sun C 5.9
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
;;
- *Sun\ F*)
- # Sun Fortran 8.3 passes all unrecognized flags to the linker
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)=''
+ *Intel*\ [[CF]]*Compiler*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
;;
+ *Portland\ Group*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
esac
;;
esac
;;
+ newsos6)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+
+ *nto* | *qnx*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+ ;;
+
osf3* | osf4* | osf5*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
# All OSF/1 code is PIC.
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
;;
rdos*)
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
;;
solaris*)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
case $cc_basename in
- f77* | f90* | f95*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
+ f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
esac
;;
sunos4*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
;;
sysv4 | sysv4.2uw2* | sysv4.3*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
;;
sysv4*MP*)
if test -d /usr/nec ;then
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
fi
;;
sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
;;
unicos*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
;;
uts4*)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
;;
*)
- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
;;
esac
fi
])
-AC_MSG_RESULT([$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)])
-
-#
-# Check to make sure the PIC flag actually works.
-#
-if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then
- AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) works],
- _LT_AC_TAGVAR(lt_cv_prog_compiler_pic_works, $1),
- [$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])], [],
- [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) in
- "" | " "*) ;;
- *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)" ;;
- esac],
- [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
-fi
case $host_os in
# For platforms which do not support PIC, -DPIC is meaningless:
*djgpp*)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)=
;;
*)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])"
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t at m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])"
;;
esac
+AC_CACHE_CHECK([for $compiler option to produce PIC],
+ [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)],
+ [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_prog_compiler_pic, $1)])
+_LT_TAGVAR(lt_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)
+
#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then
+ _LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, $1) works],
+ [_LT_TAGVAR(lt_cv_prog_compiler_pic_works, $1)],
+ [$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t at m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [],
+ [case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in
+ "" | " "*) ;;
+ *) _LT_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_TAGVAR(lt_prog_compiler_pic, $1)" ;;
+ esac],
+ [_LT_TAGVAR(lt_prog_compiler_pic, $1)=
+ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
+fi
+_LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1],
+ [Additional compiler flags for building library objects])
+
+_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1],
+ [How to pass a linker flag through the compiler])
+#
# Check to make sure the static flag actually works.
#
-wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_AC_TAGVAR(lt_prog_compiler_static, $1)\"
-AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works],
- _LT_AC_TAGVAR(lt_cv_prog_compiler_static_works, $1),
+wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\"
+_LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works],
+ _LT_TAGVAR(lt_cv_prog_compiler_static_works, $1),
$lt_tmp_static_flag,
[],
- [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=])
-])
+ [_LT_TAGVAR(lt_prog_compiler_static, $1)=])
+_LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1],
+ [Compiler flag to prevent dynamic linking])
+])# _LT_COMPILER_PIC
-# AC_LIBTOOL_PROG_LD_SHLIBS([TAGNAME])
-# ------------------------------------
+# _LT_LINKER_SHLIBS([TAGNAME])
+# ----------------------------
# See if the linker supports building shared libraries.
-AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
+m4_defun([_LT_LINKER_SHLIBS],
+[AC_REQUIRE([LT_PATH_LD])dnl
+AC_REQUIRE([LT_PATH_NM])dnl
+m4_require([_LT_PATH_MANIFEST_TOOL])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
+m4_require([_LT_TAG_COMPILER])dnl
AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
-ifelse([$1],[CXX],[
- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+m4_if([$1], [CXX], [
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+ _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
case $host_os in
aix[[4-9]]*)
# If we're using GNU nm, then we don't want the "-C" option.
# -C means demangle to AIX nm, but means don't demangle with GNU nm
- if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
+ # Also, AIX nm treats weak defined symbols like other global defined
+ # symbols, whereas GNU nm marks them as "W".
+ if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
else
- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
fi
;;
pw32*)
- _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
- ;;
- cygwin* | mingw*)
- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
- ;;
+ _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
+ ;;
+ cygwin* | mingw* | cegcc*)
+ case $cc_basename in
+ cl*)
+ _LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
+ ;;
+ *)
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
+ _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname']
+ ;;
+ esac
+ ;;
*)
- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
- ;;
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+ ;;
esac
- _LT_AC_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
-],[
+], [
runpath_var=
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=
- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
- _LT_AC_TAGVAR(archive_cmds, $1)=
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)=
- _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)=
- _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)=
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
- _LT_AC_TAGVAR(thread_safe_flag_spec, $1)=
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
- _LT_AC_TAGVAR(hardcode_direct, $1)=no
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=no
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
- _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
- _LT_AC_TAGVAR(hardcode_automatic, $1)=no
- _LT_AC_TAGVAR(module_cmds, $1)=
- _LT_AC_TAGVAR(module_expsym_cmds, $1)=
- _LT_AC_TAGVAR(always_export_symbols, $1)=no
- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+ _LT_TAGVAR(allow_undefined_flag, $1)=
+ _LT_TAGVAR(always_export_symbols, $1)=no
+ _LT_TAGVAR(archive_cmds, $1)=
+ _LT_TAGVAR(archive_expsym_cmds, $1)=
+ _LT_TAGVAR(compiler_needs_object, $1)=no
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)=
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+ _LT_TAGVAR(hardcode_automatic, $1)=no
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=no
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=
+ _LT_TAGVAR(hardcode_minus_L, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+ _LT_TAGVAR(inherit_rpath, $1)=no
+ _LT_TAGVAR(link_all_deplibs, $1)=unknown
+ _LT_TAGVAR(module_cmds, $1)=
+ _LT_TAGVAR(module_expsym_cmds, $1)=
+ _LT_TAGVAR(old_archive_from_new_cmds, $1)=
+ _LT_TAGVAR(old_archive_from_expsyms_cmds, $1)=
+ _LT_TAGVAR(thread_safe_flag_spec, $1)=
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=
# include_expsyms should be a list of space-separated symbols to be *always*
# included in the symbol list
- _LT_AC_TAGVAR(include_expsyms, $1)=
+ _LT_TAGVAR(include_expsyms, $1)=
# exclude_expsyms can be an extended regexp of symbols to exclude
# it will be wrapped by ` (' and `)$', so one must not match beginning or
# end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
# as well as any symbol that contains `d'.
- _LT_AC_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
+ _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
# Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
# platforms (ab)use it in PIC code, but their linkers get confused if
# the symbol is explicitly referenced. Since portable code cannot
@@ -5624,10 +4636,9 @@
# Exclude shared library initialization/finalization symbols.
dnl Note also adjust exclude_expsyms for C++ above.
extract_expsyms_cmds=
- # Just being paranoid about ensuring that cc_basename is set.
- _LT_CC_BASENAME([$compiler])
+
case $host_os in
- cygwin* | mingw* | pw32*)
+ cygwin* | mingw* | pw32* | cegcc*)
# FIXME: the MSVC++ port hasn't been tested in a loooong time
# When not using gcc, we currently assume that we are using
# Microsoft Visual C++.
@@ -5644,8 +4655,34 @@
;;
esac
- _LT_AC_TAGVAR(ld_shlibs, $1)=yes
+ _LT_TAGVAR(ld_shlibs, $1)=yes
+
+ # On some targets, GNU ld is compatible enough with the native linker
+ # that we're better off using the native interface for both.
+ lt_use_gnu_ld_interface=no
if test "$with_gnu_ld" = yes; then
+ case $host_os in
+ aix*)
+ # The AIX port of GNU ld has always aspired to compatibility
+ # with the native linker. However, as the warning in the GNU ld
+ # block says, versions before 2.19.5* couldn't really create working
+ # shared libraries, regardless of the interface used.
+ case `$LD -v 2>&1` in
+ *\ \(GNU\ Binutils\)\ 2.19.5*) ;;
+ *\ \(GNU\ Binutils\)\ 2.[[2-9]]*) ;;
+ *\ \(GNU\ Binutils\)\ [[3-9]]*) ;;
+ *)
+ lt_use_gnu_ld_interface=yes
+ ;;
+ esac
+ ;;
+ *)
+ lt_use_gnu_ld_interface=yes
+ ;;
+ esac
+ fi
+
+ if test "$lt_use_gnu_ld_interface" = yes; then
# If archive_cmds runs LD, not CC, wlarc should be empty
wlarc='${wl}'
@@ -5653,16 +4690,17 @@
# are reset later if shared libraries are not supported. Putting them
# here allows them to be overridden if necessary.
runpath_var=LD_RUN_PATH
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
# ancient GNU ld didn't support --whole-archive et. al.
- if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
- else
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
+ if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
+ _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ else
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=
fi
supports_anon_versioning=no
- case `$LD -v 2>/dev/null` in
+ case `$LD -v 2>&1` in
+ *GNU\ gold*) supports_anon_versioning=yes ;;
*\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
*\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
*\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
@@ -5675,58 +4713,62 @@
aix[[3-9]]*)
# On AIX/PPC, the GNU linker is very broken
if test "$host_cpu" != ia64; then
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- cat <<EOF 1>&2
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ cat <<_LT_EOF 1>&2
-*** Warning: the GNU linker, at least up to release 2.9.1, is reported
+*** Warning: the GNU linker, at least up to release 2.19, is reported
*** to be unable to reliably create shared libraries on AIX.
*** Therefore, libtool is disabling shared libraries support. If you
-*** really care for shared libraries, you may want to modify your PATH
-*** so that a non-GNU linker is found, and then restart.
+*** really care for shared libraries, you may want to install binutils
+*** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
+*** You will then need to restart the configuration process.
-EOF
+_LT_EOF
fi
;;
amigaos*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-
- # Samuel A. Falvo II <kc5tja at dolphin.openprojects.net> reports
- # that the semantics of dynamic libraries on AmigaOS, at least up
- # to version 4, is to share data among multiple programs linked
- # with the same dynamic library. Since this doesn't match the
- # behavior of shared libraries on other platforms, we can't use
- # them.
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)=''
+ ;;
+ m68k)
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ ;;
+ esac
;;
beos*)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
# Joseph Beckenbach <jrb3 at best.com> says some releases of gcc
# support --undefined. This deserves some investigation. FIXME
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
else
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ _LT_TAGVAR(ld_shlibs, $1)=no
fi
;;
- cygwin* | mingw* | pw32*)
- # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+ cygwin* | mingw* | pw32* | cegcc*)
+ # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
# as there is no search path for DLLs.
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
- _LT_AC_TAGVAR(always_export_symbols, $1)=no
- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/'\'' -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols'
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_TAGVAR(always_export_symbols, $1)=no
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
+ _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname']
- if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
# If the export-symbols file already is a .def file (1st line
# is EXPORTS), use it as is; otherwise, prepend...
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
cp $export_symbols $output_objdir/$soname.def;
else
echo EXPORTS > $output_objdir/$soname.def;
@@ -5734,15 +4776,20 @@
fi~
$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
else
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ _LT_TAGVAR(ld_shlibs, $1)=no
fi
;;
+ haiku*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ ;;
+
interix[[3-9]]*)
- _LT_AC_TAGVAR(hardcode_direct, $1)=no
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
# Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
# Instead, shared libraries are loaded at an image base (0x10000000 by
# default) and relocated if they conflict, which is a slow very memory
@@ -5749,64 +4796,98 @@
# consuming and fragmenting process. To avoid this, we pick a random,
# 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
# time. Moving up from 0x10000000 also allows more sbrk(2) space.
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
;;
- gnu* | linux* | k*bsd*-gnu)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- tmp_addflag=
+ gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
+ tmp_diet=no
+ if test "$host_os" = linux-dietlibc; then
+ case $cc_basename in
+ diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn)
+ esac
+ fi
+ if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
+ && test "$tmp_diet" = no
+ then
+ tmp_addflag=' $pic_flag'
+ tmp_sharedflag='-shared'
case $cc_basename,$host_cpu in
- pgcc*) # Portland Group C compiler
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+ pgcc*) # Portland Group C compiler
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
tmp_addflag=' $pic_flag'
;;
- pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+ pgf77* | pgf90* | pgf95* | pgfortran*)
+ # Portland Group f77 and f90 compilers
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
tmp_addflag=' $pic_flag -Mnomain' ;;
- ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
+ ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
tmp_addflag=' -i_dynamic' ;;
efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64
tmp_addflag=' -i_dynamic -nofor_main' ;;
ifc* | ifort*) # Intel Fortran compiler
tmp_addflag=' -nofor_main' ;;
+ lf95*) # Lahey Fortran 8.1
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=
+ tmp_sharedflag='--shared' ;;
+ xl[[cC]]* | bgxl[[cC]]* | mpixl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below)
+ tmp_sharedflag='-qmkshrobj'
+ tmp_addflag= ;;
+ nvcc*) # Cuda Compiler Driver 2.2
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ _LT_TAGVAR(compiler_needs_object, $1)=yes
+ ;;
esac
case `$CC -V 2>&1 | sed 5q` in
*Sun\ C*) # Sun C 5.9
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ _LT_TAGVAR(compiler_needs_object, $1)=yes
tmp_sharedflag='-G' ;;
*Sun\ F*) # Sun Fortran 8.3
tmp_sharedflag='-G' ;;
- *)
- tmp_sharedflag='-shared' ;;
esac
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- if test $supports_anon_versioning = yes; then
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $output_objdir/$libname.ver~
- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
- $echo "local: *; };" >> $output_objdir/$libname.ver~
- $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
- fi
+ if test "x$supports_anon_versioning" = xyes; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+ fi
+
+ case $cc_basename in
+ xlf* | bgf* | bgxlf* | mpixlf*)
+ # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
+ if test "x$supports_anon_versioning" = xyes; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+ fi
+ ;;
+ esac
else
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ _LT_TAGVAR(ld_shlibs, $1)=no
fi
;;
netbsd*)
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
wlarc=
else
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
fi
;;
solaris*)
- if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- cat <<EOF 1>&2
+ if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ cat <<_LT_EOF 1>&2
*** Warning: The releases 2.8.* of the GNU linker cannot reliably
*** create shared libraries on Solaris systems. Therefore, libtool
@@ -5815,12 +4896,12 @@
*** your PATH or compiler configuration so that the native linker is
*** used, and then restart.
-EOF
- elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+_LT_EOF
+ elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
else
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ _LT_TAGVAR(ld_shlibs, $1)=no
fi
;;
@@ -5827,7 +4908,7 @@
sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
case `$LD -v 2>&1` in
*\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*)
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ _LT_TAGVAR(ld_shlibs, $1)=no
cat <<_LT_EOF 1>&2
*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
@@ -5840,12 +4921,16 @@
_LT_EOF
;;
*)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
+ # For security reasons, it is highly recommended that you always
+ # use absolute paths for naming shared libraries, and exclude the
+ # DT_RUNPATH tag from executables and libraries. But doing so
+ # requires that you compile everything twice, which is a pain.
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
else
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ _LT_TAGVAR(ld_shlibs, $1)=no
fi
;;
esac
@@ -5852,42 +4937,42 @@
;;
sunos4*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
wlarc=
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
;;
*)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
else
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ _LT_TAGVAR(ld_shlibs, $1)=no
fi
;;
esac
- if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no; then
+ if test "$_LT_TAGVAR(ld_shlibs, $1)" = no; then
runpath_var=
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)=
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=
fi
else
# PORTME fill in a description of your system's linker (not GNU ld)
case $host_os in
aix3*)
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
- _LT_AC_TAGVAR(always_export_symbols, $1)=yes
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_TAGVAR(always_export_symbols, $1)=yes
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
# Note: this linker hardcodes the directories in LIBPATH if there
# are no directories specified by -L.
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
# Neither direct hardcoding nor static linking is supported with a
# broken collect2.
- _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
+ _LT_TAGVAR(hardcode_direct, $1)=unsupported
fi
;;
@@ -5901,10 +4986,12 @@
else
# If we're using GNU nm, then we don't want the "-C" option.
# -C means demangle to AIX nm, but means don't demangle with GNU nm
- if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
+ # Also, AIX nm treats weak defined symbols like other global
+ # defined symbols, whereas GNU nm marks them as "W".
+ if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
else
- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
fi
aix_use_runtimelinking=no
@@ -5913,10 +5000,10 @@
# need to do runtime linking.
case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
for ld_flag in $LDFLAGS; do
- if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
- aix_use_runtimelinking=yes
- break
- fi
+ if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+ aix_use_runtimelinking=yes
+ break
+ fi
done
;;
esac
@@ -5931,10 +5018,12 @@
# CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
# enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
- _LT_AC_TAGVAR(archive_cmds, $1)=''
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+ _LT_TAGVAR(archive_cmds, $1)=''
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
if test "$GCC" = yes; then
case $host_os in aix4.[[012]]|aix4.[[012]].*)
@@ -5941,20 +5030,20 @@
# We only want to do this on AIX 4.2 and lower, the check
# below for broken collect2 doesn't work under 4.3+
collect2name=`${CC} -print-prog-name=collect2`
- if test -f "$collect2name" && \
- strings "$collect2name" | grep resolve_lib_name >/dev/null
+ if test -f "$collect2name" &&
+ strings "$collect2name" | $GREP resolve_lib_name >/dev/null
then
- # We have reworked collect2
- :
+ # We have reworked collect2
+ :
else
- # We have old collect2
- _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
- # It fails to find uninstalled libraries when the uninstalled
- # path is not listed in the libpath. Setting hardcode_minus_L
- # to unsupported forces relinking
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
+ # We have old collect2
+ _LT_TAGVAR(hardcode_direct, $1)=unsupported
+ # It fails to find uninstalled libraries when the uninstalled
+ # path is not listed in the libpath. Setting hardcode_minus_L
+ # to unsupported forces relinking
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=
fi
;;
esac
@@ -5965,8 +5054,8 @@
else
# not using gcc
if test "$host_cpu" = ia64; then
- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
- # chokes on -Wl,-G. The following line is correct:
+ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+ # chokes on -Wl,-G. The following line is correct:
shared_flag='-G'
else
if test "$aix_use_runtimelinking" = yes; then
@@ -5977,236 +5066,252 @@
fi
fi
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
# It seems that -bexpall does not export symbols beginning with
# underscore (_), so it is better to generate a list of symbols to export.
- _LT_AC_TAGVAR(always_export_symbols, $1)=yes
+ _LT_TAGVAR(always_export_symbols, $1)=yes
if test "$aix_use_runtimelinking" = yes; then
# Warning - without using the other runtime loading flags (-brtl),
# -berok will link without error, but may produce a broken library.
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
- # Determine the default libpath from the value encoded in an empty executable.
- _LT_AC_SYS_LIBPATH_AIX
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
- else
+ _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+ _LT_SYS_MODULE_PATH_AIX([$1])
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ else
if test "$host_cpu" = ia64; then
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
- _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+ _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
+ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
else
- # Determine the default libpath from the value encoded in an empty executable.
- _LT_AC_SYS_LIBPATH_AIX
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+ _LT_SYS_MODULE_PATH_AIX([$1])
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
# Warning - without using the other run time loading flags,
# -berok will link without error, but may produce a broken library.
- _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
- # Exported symbols can be pulled into shared objects from archives
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
+ _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
+ if test "$with_gnu_ld" = yes; then
+ # We only use this code for GNU lds that support --whole-archive.
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+ else
+ # Exported symbols can be pulled into shared objects from archives
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+ fi
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
# This is similar to how AIX traditionally builds its shared libraries.
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
fi
fi
;;
amigaos*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
- # see comment about different semantics on the GNU ld section
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)=''
+ ;;
+ m68k)
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ ;;
+ esac
;;
bsdi[[45]]*)
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
;;
- cygwin* | mingw* | pw32*)
+ cygwin* | mingw* | pw32* | cegcc*)
# When not using gcc, we currently assume that we are using
# Microsoft Visual C++.
# hardcode_libdir_flag_spec is actually meaningless, as there is
# no search path for DLLs.
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
- # Tell ltmain to make .lib files, not .a files.
- libext=lib
- # Tell ltmain to make .dll files, not .so files.
- shrext_cmds=".dll"
- # FIXME: Setting linknames here is a bad hack.
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
- # The linker will automatically build a .lib file if we build a DLL.
- _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true'
- # FIXME: Should let the user specify the lib program.
- _LT_AC_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
- _LT_AC_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`'
- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+ case $cc_basename in
+ cl*)
+ # Native MSVC
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_TAGVAR(always_export_symbols, $1)=yes
+ _LT_TAGVAR(file_list_spec, $1)='@'
+ # Tell ltmain to make .lib files, not .a files.
+ libext=lib
+ # Tell ltmain to make .dll files, not .so files.
+ shrext_cmds=".dll"
+ # FIXME: Setting linknames here is a bad hack.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
+ _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+ sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
+ else
+ sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
+ fi~
+ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+ linknames='
+ # The linker will not automatically build a static lib if we build a DLL.
+ # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+ _LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1,DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
+ # Don't use ranlib
+ _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
+ _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
+ lt_tool_outputfile="@TOOL_OUTPUT@"~
+ case $lt_outputfile in
+ *.exe|*.EXE) ;;
+ *)
+ lt_outputfile="$lt_outputfile.exe"
+ lt_tool_outputfile="$lt_tool_outputfile.exe"
+ ;;
+ esac~
+ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
+ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+ $RM "$lt_outputfile.manifest";
+ fi'
+ ;;
+ *)
+ # Assume MSVC wrapper
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ # Tell ltmain to make .lib files, not .a files.
+ libext=lib
+ # Tell ltmain to make .dll files, not .so files.
+ shrext_cmds=".dll"
+ # FIXME: Setting linknames here is a bad hack.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
+ # The linker will automatically build a .lib file if we build a DLL.
+ _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
+ # FIXME: Should let the user specify the lib program.
+ _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+ ;;
+ esac
;;
darwin* | rhapsody*)
- case $host_os in
- rhapsody* | darwin1.[[012]])
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress'
- ;;
- *) # Darwin 1.3 on
- if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
- else
- case ${MACOSX_DEPLOYMENT_TARGET} in
- 10.[[012]])
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
- ;;
- 10.*)
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup'
- ;;
- esac
- fi
- ;;
- esac
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
- _LT_AC_TAGVAR(hardcode_direct, $1)=no
- _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=''
- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
- if test "$GCC" = yes ; then
- output_verbose_link_cmd='echo'
- _LT_AC_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
- _LT_AC_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
- _LT_AC_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
- else
- case $cc_basename in
- xlc*)
- output_verbose_link_cmd='echo'
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
- _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- ;;
- *)
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- esac
- fi
+ _LT_DARWIN_LINKER_FEATURES($1)
;;
dgux*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
;;
- freebsd1*)
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
-
# FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
# support. Future versions do this automatically, but an explicit c++rt0.o
# does not break anything, and helps significantly (at the cost of a little
# extra space).
freebsd2.2*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
;;
# Unfortunately, older versions of FreeBSD 2 do not have this feature.
- freebsd2*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+ freebsd2.*)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
;;
# FreeBSD 3 and greater uses gcc -shared to do shared libraries.
freebsd* | dragonfly*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
;;
hpux9*)
if test "$GCC" = yes; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
else
- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
fi
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_TAGVAR(hardcode_direct, $1)=yes
# hardcode_minus_L: Not really in the search PATH,
# but as the default location of the library.
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
;;
hpux10*)
- if test "$GCC" = yes -a "$with_gnu_ld" = no; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
else
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
fi
if test "$with_gnu_ld" = no; then
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
# hardcode_minus_L: Not really in the search PATH,
# but as the default location of the library.
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
fi
;;
hpux11*)
- if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+ if test "$GCC" = yes && test "$with_gnu_ld" = no; then
case $host_cpu in
hppa*64*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
;;
ia64*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
;;
*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
;;
esac
else
case $host_cpu in
hppa*64*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
;;
ia64*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
;;
*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ m4_if($1, [], [
+ # Older versions of the 11.00 compiler do not understand -b yet
+ # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
+ _LT_LINKER_OPTION([if $CC understands -b],
+ _LT_TAGVAR(lt_cv_prog_compiler__b, $1), [-b],
+ [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'],
+ [_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'])],
+ [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'])
;;
esac
fi
if test "$with_gnu_ld" = no; then
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
case $host_cpu in
hppa*64*|ia64*)
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
- _LT_AC_TAGVAR(hardcode_direct, $1)=no
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
;;
*)
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
# hardcode_minus_L: Not really in the search PATH,
# but as the default location of the library.
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
;;
esac
fi
@@ -6214,113 +5319,155 @@
irix5* | irix6* | nonstopux*)
if test "$GCC" = yes; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ # Try to use the -exported_symbol ld option, if it does not
+ # work, assume that -exports_file does not work either and
+ # implicitly export all symbols.
+ # This should be the same for all languages, so no per-tag cache variable.
+ AC_CACHE_CHECK([whether the $host_os linker accepts -exported_symbol],
+ [lt_cv_irix_exported_symbol],
+ [save_LDFLAGS="$LDFLAGS"
+ LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+ AC_LINK_IFELSE(
+ [AC_LANG_SOURCE(
+ [AC_LANG_CASE([C], [[int foo (void) { return 0; }]],
+ [C++], [[int foo (void) { return 0; }]],
+ [Fortran 77], [[
+ subroutine foo
+ end]],
+ [Fortran], [[
+ subroutine foo
+ end]])])],
+ [lt_cv_irix_exported_symbol=yes],
+ [lt_cv_irix_exported_symbol=no])
+ LDFLAGS="$save_LDFLAGS"])
+ if test "$lt_cv_irix_exported_symbol" = yes; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+ fi
else
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
fi
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+ _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_TAGVAR(inherit_rpath, $1)=yes
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
;;
netbsd*)
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
else
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
+ _LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
fi
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
;;
newsos6)
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
;;
+ *nto* | *qnx*)
+ ;;
+
openbsd*)
if test -f /usr/libexec/ld.so; then
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
else
case $host_os in
openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
;;
*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
;;
esac
- fi
+ fi
else
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ _LT_TAGVAR(ld_shlibs, $1)=no
fi
;;
os2*)
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
- _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
- _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+ _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
;;
osf3*)
if test "$GCC" = yes; then
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
else
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
fi
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
;;
osf4* | osf5*) # as osf3* with the addition of -msym flag
if test "$GCC" = yes; then
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
else
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
- $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
+ _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
+ $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
# Both c and cxx compiler support -rpath directly
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
fi
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
;;
solaris*)
- _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text'
+ _LT_TAGVAR(no_undefined_flag, $1)=' -z defs'
if test "$GCC" = yes; then
wlarc='${wl}'
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
- $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
else
- wlarc=''
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
+ case `$CC -V 2>&1` in
+ *"Compilers 5.0"*)
+ wlarc=''
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+ ;;
+ *)
+ wlarc='${wl}'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ ;;
+ esac
fi
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
case $host_os in
solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
*)
@@ -6327,15 +5474,15 @@
# The compiler driver will combine and reorder linker options,
# but understands `-z linker_flag'. GCC discards it without `$wl',
# but is careful enough not to reorder.
- # Supported since Solaris 2.6 (maybe 2.5.1?)
+ # Supported since Solaris 2.6 (maybe 2.5.1?)
if test "$GCC" = yes; then
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
else
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
fi
;;
esac
- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
;;
sunos4*)
@@ -6342,66 +5489,66 @@
if test "x$host_vendor" = xsequent; then
# Use $CC to link under sequent, because it throws in some extra .o
# files that make .init and .fini sections work.
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
else
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
fi
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
;;
sysv4)
case $host_vendor in
sni)
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes # is this really true???
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true???
;;
siemens)
## LD is ld it makes a PLAMLIB
## CC just makes a GrossModule.
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
- _LT_AC_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
- _LT_AC_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
+ _LT_TAGVAR(hardcode_direct, $1)=no
;;
motorola)
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- _LT_AC_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
;;
esac
runpath_var='LD_RUN_PATH'
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
;;
sysv4.3*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
;;
sysv4*MP*)
if test -d /usr/nec; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
runpath_var=LD_RUN_PATH
hardcode_runpath_var=yes
- _LT_AC_TAGVAR(ld_shlibs, $1)=yes
+ _LT_TAGVAR(ld_shlibs, $1)=yes
fi
;;
sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
- _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
runpath_var='LD_RUN_PATH'
if test "$GCC" = yes; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
else
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
fi
;;
@@ -6412,50 +5559,65 @@
# ever link correctly. If we're not using GNU ld we use -z text
# though, which does catch some bad symbols but isn't as heavy-handed
# as -z defs.
- _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
+ _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+ _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
runpath_var='LD_RUN_PATH'
if test "$GCC" = yes; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
else
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
fi
;;
uts4*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
;;
*)
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ _LT_TAGVAR(ld_shlibs, $1)=no
;;
esac
+
+ if test x$host_vendor = xsni; then
+ case $host in
+ sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Blargedynsym'
+ ;;
+ esac
+ fi
fi
])
-AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
-test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
+test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+_LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld
+
+_LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl
+_LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl
+_LT_DECL([], [extract_expsyms_cmds], [2],
+ [The commands to extract the exported symbol list from a shared archive])
+
#
# Do we need to explicitly link libc?
#
-case "x$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)" in
+case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in
x|xyes)
# Assume -lc should be added
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
if test "$enable_shared" = yes && test "$GCC" = yes; then
- case $_LT_AC_TAGVAR(archive_cmds, $1) in
+ case $_LT_TAGVAR(archive_cmds, $1) in
*'~'*)
# FIXME: we may have to deal with multi-command sequences.
;;
@@ -6463,144 +5625,2091 @@
# Test whether the compiler implicitly links with -lc since on some
# systems, -lgcc has to come before -lc. If gcc already passes -lc
# to ld, don't add -lc before -lgcc.
- AC_MSG_CHECKING([whether -lc should be explicitly linked in])
- $rm conftest*
- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+ AC_CACHE_CHECK([whether -lc should be explicitly linked in],
+ [lt_cv_]_LT_TAGVAR(archive_cmds_need_lc, $1),
+ [$RM conftest*
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
- if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
- soname=conftest
- lib=conftest
- libobjs=conftest.$ac_objext
- deplibs=
- wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
- pic_flag=$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)
- compiler_flags=-v
- linker_flags=-v
- verstring=
- output_objdir=.
- libname=conftest
- lt_save_allow_undefined_flag=$_LT_AC_TAGVAR(allow_undefined_flag, $1)
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=
- if AC_TRY_EVAL(_LT_AC_TAGVAR(archive_cmds, $1) 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1)
- then
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+ if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
+ soname=conftest
+ lib=conftest
+ libobjs=conftest.$ac_objext
+ deplibs=
+ wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1)
+ pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1)
+ compiler_flags=-v
+ linker_flags=-v
+ verstring=
+ output_objdir=.
+ libname=conftest
+ lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1)
+ _LT_TAGVAR(allow_undefined_flag, $1)=
+ if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1)
+ then
+ lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ else
+ lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+ fi
+ _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
+ else
+ cat conftest.err 1>&5
+ fi
+ $RM conftest*
+ ])
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=$lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)
+ ;;
+ esac
+ fi
+ ;;
+esac
+
+_LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0],
+ [Whether or not to add -lc for building shared libraries])
+_LT_TAGDECL([allow_libtool_libs_with_static_runtimes],
+ [enable_shared_with_static_runtimes], [0],
+ [Whether or not to disallow shared libs when runtime libs are static])
+_LT_TAGDECL([], [export_dynamic_flag_spec], [1],
+ [Compiler flag to allow reflexive dlopens])
+_LT_TAGDECL([], [whole_archive_flag_spec], [1],
+ [Compiler flag to generate shared objects directly from archives])
+_LT_TAGDECL([], [compiler_needs_object], [1],
+ [Whether the compiler copes with passing no objects directly])
+_LT_TAGDECL([], [old_archive_from_new_cmds], [2],
+ [Create an old-style archive from a shared archive])
+_LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2],
+ [Create a temporary old-style archive to link instead of a shared archive])
+_LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive])
+_LT_TAGDECL([], [archive_expsym_cmds], [2])
+_LT_TAGDECL([], [module_cmds], [2],
+ [Commands used to build a loadable module if different from building
+ a shared archive.])
+_LT_TAGDECL([], [module_expsym_cmds], [2])
+_LT_TAGDECL([], [with_gnu_ld], [1],
+ [Whether we are building with GNU ld or not])
+_LT_TAGDECL([], [allow_undefined_flag], [1],
+ [Flag that allows shared libraries with undefined symbols to be built])
+_LT_TAGDECL([], [no_undefined_flag], [1],
+ [Flag that enforces no undefined symbols])
+_LT_TAGDECL([], [hardcode_libdir_flag_spec], [1],
+ [Flag to hardcode $libdir into a binary during linking.
+ This must work even if $libdir does not exist])
+_LT_TAGDECL([], [hardcode_libdir_separator], [1],
+ [Whether we need a single "-rpath" flag with a separated argument])
+_LT_TAGDECL([], [hardcode_direct], [0],
+ [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
+ DIR into the resulting binary])
+_LT_TAGDECL([], [hardcode_direct_absolute], [0],
+ [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
+ DIR into the resulting binary and the resulting library dependency is
+ "absolute", i.e impossible to change by setting ${shlibpath_var} if the
+ library is relocated])
+_LT_TAGDECL([], [hardcode_minus_L], [0],
+ [Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+ into the resulting binary])
+_LT_TAGDECL([], [hardcode_shlibpath_var], [0],
+ [Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+ into the resulting binary])
+_LT_TAGDECL([], [hardcode_automatic], [0],
+ [Set to "yes" if building a shared library automatically hardcodes DIR
+ into the library and all subsequent libraries and executables linked
+ against it])
+_LT_TAGDECL([], [inherit_rpath], [0],
+ [Set to yes if linker adds runtime paths of dependent libraries
+ to runtime path list])
+_LT_TAGDECL([], [link_all_deplibs], [0],
+ [Whether libtool must link a program against all its dependency libraries])
+_LT_TAGDECL([], [always_export_symbols], [0],
+ [Set to "yes" if exported symbols are required])
+_LT_TAGDECL([], [export_symbols_cmds], [2],
+ [The commands to list exported symbols])
+_LT_TAGDECL([], [exclude_expsyms], [1],
+ [Symbols that should not be listed in the preloaded symbols])
+_LT_TAGDECL([], [include_expsyms], [1],
+ [Symbols that must always be exported])
+_LT_TAGDECL([], [prelink_cmds], [2],
+ [Commands necessary for linking programs (against libraries) with templates])
+_LT_TAGDECL([], [postlink_cmds], [2],
+ [Commands necessary for finishing linking programs])
+_LT_TAGDECL([], [file_list_spec], [1],
+ [Specify filename containing input files])
+dnl FIXME: Not yet implemented
+dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1],
+dnl [Compiler flag to generate thread safe objects])
+])# _LT_LINKER_SHLIBS
+
+
+# _LT_LANG_C_CONFIG([TAG])
+# ------------------------
+# Ensure that the configuration variables for a C compiler are suitably
+# defined. These variables are subsequently used by _LT_CONFIG to write
+# the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_C_CONFIG],
+[m4_require([_LT_DECL_EGREP])dnl
+lt_save_CC="$CC"
+AC_LANG_PUSH(C)
+
+# Source file extension for C test sources.
+ac_ext=c
+
+# Object file extension for compiled C test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='int main(){return(0);}'
+
+_LT_TAG_COMPILER
+# Save the default compiler, since it gets overwritten when the other
+# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
+compiler_DEFAULT=$CC
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+if test -n "$compiler"; then
+ _LT_COMPILER_NO_RTTI($1)
+ _LT_COMPILER_PIC($1)
+ _LT_COMPILER_C_O($1)
+ _LT_COMPILER_FILE_LOCKS($1)
+ _LT_LINKER_SHLIBS($1)
+ _LT_SYS_DYNAMIC_LINKER($1)
+ _LT_LINKER_HARDCODE_LIBPATH($1)
+ LT_SYS_DLOPEN_SELF
+ _LT_CMD_STRIPLIB
+
+ # Report which library types will actually be built
+ AC_MSG_CHECKING([if libtool supports shared libraries])
+ AC_MSG_RESULT([$can_build_shared])
+
+ AC_MSG_CHECKING([whether to build shared libraries])
+ test "$can_build_shared" = "no" && enable_shared=no
+
+ # On AIX, shared libraries and static libraries use the same namespace, and
+ # are all built from PIC.
+ case $host_os in
+ aix3*)
+ test "$enable_shared" = yes && enable_static=no
+ if test -n "$RANLIB"; then
+ archive_cmds="$archive_cmds~\$RANLIB \$lib"
+ postinstall_cmds='$RANLIB $lib'
+ fi
+ ;;
+
+ aix[[4-9]]*)
+ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+ test "$enable_shared" = yes && enable_static=no
+ fi
+ ;;
+ esac
+ AC_MSG_RESULT([$enable_shared])
+
+ AC_MSG_CHECKING([whether to build static libraries])
+ # Make sure either enable_shared or enable_static is yes.
+ test "$enable_shared" = yes || enable_static=yes
+ AC_MSG_RESULT([$enable_static])
+
+ _LT_CONFIG($1)
+fi
+AC_LANG_POP
+CC="$lt_save_CC"
+])# _LT_LANG_C_CONFIG
+
+
+# _LT_LANG_CXX_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for a C++ compiler are suitably
+# defined. These variables are subsequently used by _LT_CONFIG to write
+# the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_CXX_CONFIG],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_PATH_MANIFEST_TOOL])dnl
+if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
+ ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
+ (test "X$CXX" != "Xg++"))) ; then
+ AC_PROG_CXXCPP
+else
+ _lt_caught_CXX_error=yes
+fi
+
+AC_LANG_PUSH(C++)
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_TAGVAR(allow_undefined_flag, $1)=
+_LT_TAGVAR(always_export_symbols, $1)=no
+_LT_TAGVAR(archive_expsym_cmds, $1)=
+_LT_TAGVAR(compiler_needs_object, $1)=no
+_LT_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_TAGVAR(hardcode_direct, $1)=no
+_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_TAGVAR(hardcode_minus_L, $1)=no
+_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+_LT_TAGVAR(hardcode_automatic, $1)=no
+_LT_TAGVAR(inherit_rpath, $1)=no
+_LT_TAGVAR(module_cmds, $1)=
+_LT_TAGVAR(module_expsym_cmds, $1)=
+_LT_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+_LT_TAGVAR(no_undefined_flag, $1)=
+_LT_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+
+# Source file extension for C++ test sources.
+ac_ext=cpp
+
+# Object file extension for compiled C++ test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# No sense in running all these tests if we already determined that
+# the CXX compiler isn't working. Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test "$_lt_caught_CXX_error" != yes; then
+ # Code to be used in simple compile tests
+ lt_simple_compile_test_code="int some_variable = 0;"
+
+ # Code to be used in simple link tests
+ lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }'
+
+ # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+ _LT_TAG_COMPILER
+
+ # save warnings/boilerplate of simple test code
+ _LT_COMPILER_BOILERPLATE
+ _LT_LINKER_BOILERPLATE
+
+ # Allow CC to be a program name with arguments.
+ lt_save_CC=$CC
+ lt_save_CFLAGS=$CFLAGS
+ lt_save_LD=$LD
+ lt_save_GCC=$GCC
+ GCC=$GXX
+ lt_save_with_gnu_ld=$with_gnu_ld
+ lt_save_path_LD=$lt_cv_path_LD
+ if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
+ lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
+ else
+ $as_unset lt_cv_prog_gnu_ld
+ fi
+ if test -n "${lt_cv_path_LDCXX+set}"; then
+ lt_cv_path_LD=$lt_cv_path_LDCXX
+ else
+ $as_unset lt_cv_path_LD
+ fi
+ test -z "${LDCXX+set}" || LD=$LDCXX
+ CC=${CXX-"c++"}
+ CFLAGS=$CXXFLAGS
+ compiler=$CC
+ _LT_TAGVAR(compiler, $1)=$CC
+ _LT_CC_BASENAME([$compiler])
+
+ if test -n "$compiler"; then
+ # We don't want -fno-exception when compiling C++ code, so set the
+ # no_builtin_flag separately
+ if test "$GXX" = yes; then
+ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
+ else
+ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
+ fi
+
+ if test "$GXX" = yes; then
+ # Set up default GNU C++ configuration
+
+ LT_PATH_LD
+
+ # Check if GNU C++ uses GNU ld as the underlying linker, since the
+ # archiving commands below assume that GNU ld is being used.
+ if test "$with_gnu_ld" = yes; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+
+ # If archive_cmds runs LD, not CC, wlarc should be empty
+ # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
+ # investigate it a little bit more. (MM)
+ wlarc='${wl}'
+
+ # ancient GNU ld didn't support --whole-archive et. al.
+ if eval "`$CC -print-prog-name=ld` --help 2>&1" |
+ $GREP 'no-whole-archive' > /dev/null; then
+ _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
else
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=
fi
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
else
- cat conftest.err 1>&5
+ with_gnu_ld=no
+ wlarc=
+
+ # A generic and very simple default shared library creation
+ # command for GNU C++ for the case where it uses the native
+ # linker, instead of GNU ld. If possible, this setting should
+ # overridden to take advantage of the native linker features on
+ # the platform it is being used on.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
fi
- $rm conftest*
- AC_MSG_RESULT([$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)])
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+
+ else
+ GXX=no
+ with_gnu_ld=no
+ wlarc=
+ fi
+
+ # PORTME: fill in a description of your system's C++ link characteristics
+ AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
+ _LT_TAGVAR(ld_shlibs, $1)=yes
+ case $host_os in
+ aix3*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ aix[[4-9]]*)
+ if test "$host_cpu" = ia64; then
+ # On IA64, the linker does run time linking by default, so we don't
+ # have to do anything special.
+ aix_use_runtimelinking=no
+ exp_sym_flag='-Bexport'
+ no_entry_flag=""
+ else
+ aix_use_runtimelinking=no
+
+ # Test if we are trying to use run time linking or normal
+ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+ # need to do runtime linking.
+ case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
+ for ld_flag in $LDFLAGS; do
+ case $ld_flag in
+ *-brtl*)
+ aix_use_runtimelinking=yes
+ break
+ ;;
+ esac
+ done
+ ;;
+ esac
+
+ exp_sym_flag='-bexport'
+ no_entry_flag='-bnoentry'
+ fi
+
+ # When large executables or shared objects are built, AIX ld can
+ # have problems creating the table of contents. If linking a library
+ # or program results in "error TOC overflow" add -mminimal-toc to
+ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
+ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+ _LT_TAGVAR(archive_cmds, $1)=''
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
+
+ if test "$GXX" = yes; then
+ case $host_os in aix4.[[012]]|aix4.[[012]].*)
+ # We only want to do this on AIX 4.2 and lower, the check
+ # below for broken collect2 doesn't work under 4.3+
+ collect2name=`${CC} -print-prog-name=collect2`
+ if test -f "$collect2name" &&
+ strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+ then
+ # We have reworked collect2
+ :
+ else
+ # We have old collect2
+ _LT_TAGVAR(hardcode_direct, $1)=unsupported
+ # It fails to find uninstalled libraries when the uninstalled
+ # path is not listed in the libpath. Setting hardcode_minus_L
+ # to unsupported forces relinking
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=
+ fi
+ esac
+ shared_flag='-shared'
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag="$shared_flag "'${wl}-G'
+ fi
+ else
+ # not using gcc
+ if test "$host_cpu" = ia64; then
+ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+ # chokes on -Wl,-G. The following line is correct:
+ shared_flag='-G'
+ else
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag='${wl}-G'
+ else
+ shared_flag='${wl}-bM:SRE'
+ fi
+ fi
+ fi
+
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
+ # It seems that -bexpall does not export symbols beginning with
+ # underscore (_), so it is better to generate a list of symbols to
+ # export.
+ _LT_TAGVAR(always_export_symbols, $1)=yes
+ if test "$aix_use_runtimelinking" = yes; then
+ # Warning - without using the other runtime loading flags (-brtl),
+ # -berok will link without error, but may produce a broken library.
+ _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
+ # Determine the default libpath from the value encoded in an empty
+ # executable.
+ _LT_SYS_MODULE_PATH_AIX([$1])
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ else
+ if test "$host_cpu" = ia64; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+ _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
+ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+ else
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+ _LT_SYS_MODULE_PATH_AIX([$1])
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+ # Warning - without using the other run time loading flags,
+ # -berok will link without error, but may produce a broken library.
+ _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
+ if test "$with_gnu_ld" = yes; then
+ # We only use this code for GNU lds that support --whole-archive.
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+ else
+ # Exported symbols can be pulled into shared objects from archives
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+ fi
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+ # This is similar to how AIX traditionally builds its shared
+ # libraries.
+ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+ fi
+ fi
+ ;;
+
+ beos*)
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ # Joseph Beckenbach <jrb3 at best.com> says some releases of gcc
+ # support --undefined. This deserves some investigation. FIXME
+ _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+
+ chorus*)
+ case $cc_basename in
+ *)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+ ;;
+
+ cygwin* | mingw* | pw32* | cegcc*)
+ case $GXX,$cc_basename in
+ ,cl* | no,cl*)
+ # Native MSVC
+ # hardcode_libdir_flag_spec is actually meaningless, as there is
+ # no search path for DLLs.
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_TAGVAR(always_export_symbols, $1)=yes
+ _LT_TAGVAR(file_list_spec, $1)='@'
+ # Tell ltmain to make .lib files, not .a files.
+ libext=lib
+ # Tell ltmain to make .dll files, not .so files.
+ shrext_cmds=".dll"
+ # FIXME: Setting linknames here is a bad hack.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
+ _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+ $SED -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
+ else
+ $SED -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
+ fi~
+ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+ linknames='
+ # The linker will not automatically build a static lib if we build a DLL.
+ # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+ # Don't use ranlib
+ _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
+ _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
+ lt_tool_outputfile="@TOOL_OUTPUT@"~
+ case $lt_outputfile in
+ *.exe|*.EXE) ;;
+ *)
+ lt_outputfile="$lt_outputfile.exe"
+ lt_tool_outputfile="$lt_tool_outputfile.exe"
+ ;;
+ esac~
+ func_to_tool_file "$lt_outputfile"~
+ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
+ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+ $RM "$lt_outputfile.manifest";
+ fi'
+ ;;
+ *)
+ # g++
+ # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+ # as there is no search path for DLLs.
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols'
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_TAGVAR(always_export_symbols, $1)=no
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+
+ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ # If the export-symbols file already is a .def file (1st line
+ # is EXPORTS), use it as is; otherwise, prepend...
+ _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+ cp $export_symbols $output_objdir/$soname.def;
+ else
+ echo EXPORTS > $output_objdir/$soname.def;
+ cat $export_symbols >> $output_objdir/$soname.def;
+ fi~
+ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+ esac
+ ;;
+ darwin* | rhapsody*)
+ _LT_DARWIN_LINKER_FEATURES($1)
+ ;;
+
+ dgux*)
+ case $cc_basename in
+ ec++*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ ghcx*)
+ # Green Hills C++ Compiler
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+ ;;
+
+ freebsd2.*)
+ # C++ shared libraries reported to be fairly broken before
+ # switch to ELF
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+
+ freebsd-elf*)
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ ;;
+
+ freebsd* | dragonfly*)
+ # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
+ # conventions
+ _LT_TAGVAR(ld_shlibs, $1)=yes
+ ;;
+
+ gnu*)
+ ;;
+
+ haiku*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ ;;
+
+ hpux9*)
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
+ # but as the default
+ # location of the library.
+
+ case $cc_basename in
+ CC*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ aCC*)
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+ ;;
+ *)
+ if test "$GXX" = yes; then
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ else
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+ esac
+ ;;
+
+ hpux10*|hpux11*)
+ if test $with_gnu_ld = no; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+ case $host_cpu in
+ hppa*64*|ia64*)
+ ;;
+ *)
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ ;;
+ esac
+ fi
+ case $host_cpu in
+ hppa*64*|ia64*)
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+ *)
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
+ # but as the default
+ # location of the library.
+ ;;
+ esac
+
+ case $cc_basename in
+ CC*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ aCC*)
+ case $host_cpu in
+ hppa*64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ ia64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ esac
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+ ;;
+ *)
+ if test "$GXX" = yes; then
+ if test $with_gnu_ld = no; then
+ case $host_cpu in
+ hppa*64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ ia64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ esac
+ fi
+ else
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+ esac
+ ;;
+
+ interix[[3-9]]*)
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+ # Instead, shared libraries are loaded at an image base (0x10000000 by
+ # default) and relocated if they conflict, which is a slow very memory
+ # consuming and fragmenting process. To avoid this, we pick a random,
+ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+ # time. Moving up from 0x10000000 also allows more sbrk(2) space.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ ;;
+ irix5* | irix6*)
+ case $cc_basename in
+ CC*)
+ # SGI C++
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+
+ # Archives containing C++ object files must be created using
+ # "CC -ar", where "CC" is the IRIX C++ compiler. This is
+ # necessary to make sure instantiated templates are included
+ # in the archive.
+ _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
+ ;;
+ *)
+ if test "$GXX" = yes; then
+ if test "$with_gnu_ld" = no; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib'
+ fi
+ fi
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ ;;
+ esac
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_TAGVAR(inherit_rpath, $1)=yes
+ ;;
+
+ linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ case $cc_basename in
+ KCC*)
+ # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+ # KCC will only create a shared library if the output file
+ # ends with ".so" (or ".sl" for HP-UX), so rename the library
+ # to its proper name (with version) after linking.
+ _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+
+ # Archives containing C++ object files must be created using
+ # "CC -Bstatic", where "CC" is the KAI C++ compiler.
+ _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
+ ;;
+ icpc* | ecpc* )
+ # Intel C++
+ with_gnu_ld=yes
+ # version 8.0 and above of icpc choke on multiply defined symbols
+ # if we add $predep_objects and $postdep_objects, however 7.1 and
+ # earlier do not add the objects themselves.
+ case `$CC -V 2>&1` in
+ *"Version 7."*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ ;;
+ *) # Version 8.0 or newer
+ tmp_idyn=
+ case $host_cpu in
+ ia64*) tmp_idyn=' -i_dynamic';;
+ esac
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ ;;
+ esac
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+ ;;
+ pgCC* | pgcpp*)
+ # Portland Group C++ compiler
+ case `$CC -V` in
+ *pgCC\ [[1-5]].* | *pgcpp\ [[1-5]].*)
+ _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
+ compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"'
+ _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
+ $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~
+ $RANLIB $oldlib'
+ _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+ ;;
+ *) # Version 6 and above use weak symbols
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+ ;;
+ esac
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ ;;
+ cxx*)
+ # Compaq C++
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
+
+ runpath_var=LD_RUN_PATH
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed'
+ ;;
+ xl* | mpixl* | bgxl*)
+ # IBM XL 8.0 on PPC, with GNU ld
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ if test "x$supports_anon_versioning" = xyes; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+ fi
+ ;;
+ *)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*)
+ # Sun C++ 5.9
+ _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ _LT_TAGVAR(compiler_needs_object, $1)=yes
+
+ # Not sure whether something based on
+ # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
+ # would be better.
+ output_verbose_link_cmd='func_echo_all'
+
+ # Archives containing C++ object files must be created using
+ # "CC -xar", where "CC" is the Sun C++ compiler. This is
+ # necessary to make sure instantiated templates are included
+ # in the archive.
+ _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+
+ lynxos*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+
+ m88k*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+
+ mvs*)
+ case $cc_basename in
+ cxx*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+ ;;
+
+ netbsd*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
+ wlarc=
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ fi
+ # Workaround some broken pre-1.5 toolchains
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
+ ;;
+
+ *nto* | *qnx*)
+ _LT_TAGVAR(ld_shlibs, $1)=yes
+ ;;
+
+ openbsd2*)
+ # C++ shared libraries are fairly broken
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+
+ openbsd*)
+ if test -f /usr/libexec/ld.so; then
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ fi
+ output_verbose_link_cmd=func_echo_all
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+
+ osf3* | osf4* | osf5*)
+ case $cc_basename in
+ KCC*)
+ # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+ # KCC will only create a shared library if the output file
+ # ends with ".so" (or ".sl" for HP-UX), so rename the library
+ # to its proper name (with version) after linking.
+ _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+ # Archives containing C++ object files must be created using
+ # the KAI C++ compiler.
+ case $host in
+ osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;;
+ *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;;
+ esac
+ ;;
+ RCC*)
+ # Rational C++ 2.4.1
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ cxx*)
+ case $host in
+ osf3*)
+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ ;;
+ *)
+ _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
+ echo "-hidden">> $lib.exp~
+ $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~
+ $RM $lib.exp'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+ ;;
+ esac
+
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+ ;;
+ *)
+ if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+ case $host in
+ osf3*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ ;;
+ esac
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+
+ else
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+ esac
+ ;;
+
+ psos*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+
+ sunos4*)
+ case $cc_basename in
+ CC*)
+ # Sun C++ 4.x
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ lcc*)
+ # Lucid
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+ ;;
+
+ solaris*)
+ case $cc_basename in
+ CC* | sunCC*)
+ # Sun C++ 4.2, 5.x and Centerline C++
+ _LT_TAGVAR(archive_cmds_need_lc,$1)=yes
+ _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ case $host_os in
+ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+ *)
+ # The compiler driver will combine and reorder linker options,
+ # but understands `-z linker_flag'.
+ # Supported since Solaris 2.6 (maybe 2.5.1?)
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
+ ;;
+ esac
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+
+ output_verbose_link_cmd='func_echo_all'
+
+ # Archives containing C++ object files must be created using
+ # "CC -xar", where "CC" is the Sun C++ compiler. This is
+ # necessary to make sure instantiated templates are included
+ # in the archive.
+ _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
+ ;;
+ gcx*)
+ # Green Hills C++ Compiler
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+
+ # The C++ compiler must be used to create the archive.
+ _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
+ ;;
+ *)
+ # GNU C++ compiler with Solaris linker
+ if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+ _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
+ if $CC --version | $GREP -v '^2\.7' > /dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+ else
+ # g++ 2.7 appears to require `-G' NOT `-shared' on this
+ # platform.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+ fi
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
+ case $host_os in
+ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+ *)
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+ ;;
+ esac
+ fi
+ ;;
+ esac
+ ;;
+
+ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
+ _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ runpath_var='LD_RUN_PATH'
+
+ case $cc_basename in
+ CC*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
;;
+
+ sysv5* | sco3.2v5* | sco5v6*)
+ # Note: We can NOT use -z defs as we might desire, because we do not
+ # link with -lc, and that would cause any symbols used from libc to
+ # always be unresolved, which means just about no library would
+ # ever link correctly. If we're not using GNU ld we use -z text
+ # though, which does catch some bad symbols but isn't as heavy-handed
+ # as -z defs.
+ _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+ _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
+ runpath_var='LD_RUN_PATH'
+
+ case $cc_basename in
+ CC*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(old_archive_cmds, $1)='$CC -Tprelink_objects $oldobjs~
+ '"$_LT_TAGVAR(old_archive_cmds, $1)"
+ _LT_TAGVAR(reload_cmds, $1)='$CC -Tprelink_objects $reload_objs~
+ '"$_LT_TAGVAR(reload_cmds, $1)"
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ ;;
+
+ tandem*)
+ case $cc_basename in
+ NCC*)
+ # NonStop-UX NCC 3.20
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+ ;;
+
+ vxworks*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+
+ *)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
esac
- fi
+
+ AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
+ test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+
+ _LT_TAGVAR(GCC, $1)="$GXX"
+ _LT_TAGVAR(LD, $1)="$LD"
+
+ ## CAVEAT EMPTOR:
+ ## There is no encapsulation within the following macros, do not change
+ ## the running order or otherwise move them around unless you know exactly
+ ## what you are doing...
+ _LT_SYS_HIDDEN_LIBDEPS($1)
+ _LT_COMPILER_PIC($1)
+ _LT_COMPILER_C_O($1)
+ _LT_COMPILER_FILE_LOCKS($1)
+ _LT_LINKER_SHLIBS($1)
+ _LT_SYS_DYNAMIC_LINKER($1)
+ _LT_LINKER_HARDCODE_LIBPATH($1)
+
+ _LT_CONFIG($1)
+ fi # test -n "$compiler"
+
+ CC=$lt_save_CC
+ CFLAGS=$lt_save_CFLAGS
+ LDCXX=$LD
+ LD=$lt_save_LD
+ GCC=$lt_save_GCC
+ with_gnu_ld=$lt_save_with_gnu_ld
+ lt_cv_path_LDCXX=$lt_cv_path_LD
+ lt_cv_path_LD=$lt_save_path_LD
+ lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
+ lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
+fi # test "$_lt_caught_CXX_error" != yes
+
+AC_LANG_POP
+])# _LT_LANG_CXX_CONFIG
+
+
+# _LT_FUNC_STRIPNAME_CNF
+# ----------------------
+# func_stripname_cnf prefix suffix name
+# strip PREFIX and SUFFIX off of NAME.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+#
+# This function is identical to the (non-XSI) version of func_stripname,
+# except this one can be used by m4 code that may be executed by configure,
+# rather than the libtool script.
+m4_defun([_LT_FUNC_STRIPNAME_CNF],[dnl
+AC_REQUIRE([_LT_DECL_SED])
+AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])
+func_stripname_cnf ()
+{
+ case ${2} in
+ .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
+ *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
+ esac
+} # func_stripname_cnf
+])# _LT_FUNC_STRIPNAME_CNF
+
+# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME])
+# ---------------------------------
+# Figure out "hidden" library dependencies from verbose
+# compiler output when linking a shared library.
+# Parse the compiler output and extract the necessary
+# objects, libraries and library flags.
+m4_defun([_LT_SYS_HIDDEN_LIBDEPS],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+AC_REQUIRE([_LT_FUNC_STRIPNAME_CNF])dnl
+# Dependencies to place before and after the object being linked:
+_LT_TAGVAR(predep_objects, $1)=
+_LT_TAGVAR(postdep_objects, $1)=
+_LT_TAGVAR(predeps, $1)=
+_LT_TAGVAR(postdeps, $1)=
+_LT_TAGVAR(compiler_lib_search_path, $1)=
+
+dnl we can't use the lt_simple_compile_test_code here,
+dnl because it contains code intended for an executable,
+dnl not a library. It's possible we should let each
+dnl tag define a new lt_????_link_test_code variable,
+dnl but it's only used here...
+m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF
+int a;
+void foo (void) { a = 0; }
+_LT_EOF
+], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF
+class Foo
+{
+public:
+ Foo (void) { a = 0; }
+private:
+ int a;
+};
+_LT_EOF
+], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF
+ subroutine foo
+ implicit none
+ integer*4 a
+ a=0
+ return
+ end
+_LT_EOF
+], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF
+ subroutine foo
+ implicit none
+ integer a
+ a=0
+ return
+ end
+_LT_EOF
+], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF
+public class foo {
+ private int a;
+ public void bar (void) {
+ a = 0;
+ }
+};
+_LT_EOF
+], [$1], [GO], [cat > conftest.$ac_ext <<_LT_EOF
+package foo
+func foo() {
+}
+_LT_EOF
+])
+
+_lt_libdeps_save_CFLAGS=$CFLAGS
+case "$CC $CFLAGS " in #(
+*\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;;
+*\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;;
+*\ -fuse-linker-plugin*\ *) CFLAGS="$CFLAGS -fno-use-linker-plugin" ;;
+esac
+
+dnl Parse the compiler output and extract the necessary
+dnl objects, libraries and library flags.
+if AC_TRY_EVAL(ac_compile); then
+ # Parse the compiler output and extract the necessary
+ # objects, libraries and library flags.
+
+ # Sentinel used to keep track of whether or not we are before
+ # the conftest object file.
+ pre_test_object_deps_done=no
+
+ for p in `eval "$output_verbose_link_cmd"`; do
+ case ${prev}${p} in
+
+ -L* | -R* | -l*)
+ # Some compilers place space between "-{L,R}" and the path.
+ # Remove the space.
+ if test $p = "-L" ||
+ test $p = "-R"; then
+ prev=$p
+ continue
+ fi
+
+ # Expand the sysroot to ease extracting the directories later.
+ if test -z "$prev"; then
+ case $p in
+ -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;;
+ -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;;
+ -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;;
+ esac
+ fi
+ case $p in
+ =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;;
+ esac
+ if test "$pre_test_object_deps_done" = no; then
+ case ${prev} in
+ -L | -R)
+ # Internal compiler library paths should come after those
+ # provided the user. The postdeps already come after the
+ # user supplied libs so there is no need to process them.
+ if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then
+ _LT_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
+ else
+ _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
+ fi
+ ;;
+ # The "-l" case would never come before the object being
+ # linked, so don't bother handling this case.
+ esac
+ else
+ if test -z "$_LT_TAGVAR(postdeps, $1)"; then
+ _LT_TAGVAR(postdeps, $1)="${prev}${p}"
+ else
+ _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}"
+ fi
+ fi
+ prev=
+ ;;
+
+ *.lto.$objext) ;; # Ignore GCC LTO objects
+ *.$objext)
+ # This assumes that the test object file only shows up
+ # once in the compiler output.
+ if test "$p" = "conftest.$objext"; then
+ pre_test_object_deps_done=yes
+ continue
+ fi
+
+ if test "$pre_test_object_deps_done" = no; then
+ if test -z "$_LT_TAGVAR(predep_objects, $1)"; then
+ _LT_TAGVAR(predep_objects, $1)="$p"
+ else
+ _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p"
+ fi
+ else
+ if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then
+ _LT_TAGVAR(postdep_objects, $1)="$p"
+ else
+ _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p"
+ fi
+ fi
+ ;;
+
+ *) ;; # Ignore the rest.
+
+ esac
+ done
+
+ # Clean up.
+ rm -f a.out a.exe
+else
+ echo "libtool.m4: error: problem compiling $1 test program"
+fi
+
+$RM -f confest.$objext
+CFLAGS=$_lt_libdeps_save_CFLAGS
+
+# PORTME: override above test on systems where it is broken
+m4_if([$1], [CXX],
+[case $host_os in
+interix[[3-9]]*)
+ # Interix 3.5 installs completely hosed .la files for C++, so rather than
+ # hack all around it, let's just trust "g++" to DTRT.
+ _LT_TAGVAR(predep_objects,$1)=
+ _LT_TAGVAR(postdep_objects,$1)=
+ _LT_TAGVAR(postdeps,$1)=
;;
+
+linux*)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*)
+ # Sun C++ 5.9
+
+ # The more standards-conforming stlport4 library is
+ # incompatible with the Cstd library. Avoid specifying
+ # it if it's in CXXFLAGS. Ignore libCrun as
+ # -library=stlport4 depends on it.
+ case " $CXX $CXXFLAGS " in
+ *" -library=stlport4 "*)
+ solaris_use_stlport4=yes
+ ;;
+ esac
+
+ if test "$solaris_use_stlport4" != yes; then
+ _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
+ fi
+ ;;
+ esac
+ ;;
+
+solaris*)
+ case $cc_basename in
+ CC* | sunCC*)
+ # The more standards-conforming stlport4 library is
+ # incompatible with the Cstd library. Avoid specifying
+ # it if it's in CXXFLAGS. Ignore libCrun as
+ # -library=stlport4 depends on it.
+ case " $CXX $CXXFLAGS " in
+ *" -library=stlport4 "*)
+ solaris_use_stlport4=yes
+ ;;
+ esac
+
+ # Adding this requires a known-good setup of shared libraries for
+ # Sun compiler versions before 5.6, else PIC objects from an old
+ # archive will be linked into the output, leading to subtle bugs.
+ if test "$solaris_use_stlport4" != yes; then
+ _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
+ fi
+ ;;
+ esac
+ ;;
esac
-])# AC_LIBTOOL_PROG_LD_SHLIBS
+])
+case " $_LT_TAGVAR(postdeps, $1) " in
+*" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;;
+esac
+ _LT_TAGVAR(compiler_lib_search_dirs, $1)=
+if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then
+ _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
+fi
+_LT_TAGDECL([], [compiler_lib_search_dirs], [1],
+ [The directories searched by this compiler when creating a shared library])
+_LT_TAGDECL([], [predep_objects], [1],
+ [Dependencies to place before and after the objects being linked to
+ create a shared library])
+_LT_TAGDECL([], [postdep_objects], [1])
+_LT_TAGDECL([], [predeps], [1])
+_LT_TAGDECL([], [postdeps], [1])
+_LT_TAGDECL([], [compiler_lib_search_path], [1],
+ [The library search path used internally by the compiler when linking
+ a shared library])
+])# _LT_SYS_HIDDEN_LIBDEPS
-# _LT_AC_FILE_LTDLL_C
-# -------------------
-# Be careful that the start marker always follows a newline.
-AC_DEFUN([_LT_AC_FILE_LTDLL_C], [
-# /* ltdll.c starts here */
-# #define WIN32_LEAN_AND_MEAN
-# #include <windows.h>
-# #undef WIN32_LEAN_AND_MEAN
-# #include <stdio.h>
-#
-# #ifndef __CYGWIN__
-# # ifdef __CYGWIN32__
-# # define __CYGWIN__ __CYGWIN32__
-# # endif
-# #endif
-#
-# #ifdef __cplusplus
-# extern "C" {
-# #endif
-# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved);
-# #ifdef __cplusplus
-# }
-# #endif
-#
-# #ifdef __CYGWIN__
-# #include <cygwin/cygwin_dll.h>
-# DECLARE_CYGWIN_DLL( DllMain );
-# #endif
-# HINSTANCE __hDllInstance_base;
-#
-# BOOL APIENTRY
-# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved)
-# {
-# __hDllInstance_base = hInst;
-# return TRUE;
-# }
-# /* ltdll.c ends here */
-])# _LT_AC_FILE_LTDLL_C
+# _LT_LANG_F77_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for a Fortran 77 compiler are
+# suitably defined. These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_F77_CONFIG],
+[AC_LANG_PUSH(Fortran 77)
+if test -z "$F77" || test "X$F77" = "Xno"; then
+ _lt_disable_F77=yes
+fi
-# _LT_AC_TAGVAR(VARNAME, [TAGNAME])
-# ---------------------------------
-AC_DEFUN([_LT_AC_TAGVAR], [ifelse([$2], [], [$1], [$1_$2])])
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_TAGVAR(allow_undefined_flag, $1)=
+_LT_TAGVAR(always_export_symbols, $1)=no
+_LT_TAGVAR(archive_expsym_cmds, $1)=
+_LT_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_TAGVAR(hardcode_direct, $1)=no
+_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_TAGVAR(hardcode_minus_L, $1)=no
+_LT_TAGVAR(hardcode_automatic, $1)=no
+_LT_TAGVAR(inherit_rpath, $1)=no
+_LT_TAGVAR(module_cmds, $1)=
+_LT_TAGVAR(module_expsym_cmds, $1)=
+_LT_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+_LT_TAGVAR(no_undefined_flag, $1)=
+_LT_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+# Source file extension for f77 test sources.
+ac_ext=f
-# old names
-AC_DEFUN([AM_PROG_LIBTOOL], [AC_PROG_LIBTOOL])
-AC_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)])
-AC_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)])
-AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
-AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
-AC_DEFUN([AM_PROG_LD], [AC_PROG_LD])
-AC_DEFUN([AM_PROG_NM], [AC_PROG_NM])
+# Object file extension for compiled f77 test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
-# This is just to silence aclocal about the macro not being used
-ifelse([AC_DISABLE_FAST_INSTALL])
+# No sense in running all these tests if we already determined that
+# the F77 compiler isn't working. Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test "$_lt_disable_F77" != yes; then
+ # Code to be used in simple compile tests
+ lt_simple_compile_test_code="\
+ subroutine t
+ return
+ end
+"
-AC_DEFUN([LT_AC_PROG_GCJ],
-[AC_CHECK_TOOL(GCJ, gcj, no)
- test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
- AC_SUBST(GCJFLAGS)
+ # Code to be used in simple link tests
+ lt_simple_link_test_code="\
+ program t
+ end
+"
+
+ # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+ _LT_TAG_COMPILER
+
+ # save warnings/boilerplate of simple test code
+ _LT_COMPILER_BOILERPLATE
+ _LT_LINKER_BOILERPLATE
+
+ # Allow CC to be a program name with arguments.
+ lt_save_CC="$CC"
+ lt_save_GCC=$GCC
+ lt_save_CFLAGS=$CFLAGS
+ CC=${F77-"f77"}
+ CFLAGS=$FFLAGS
+ compiler=$CC
+ _LT_TAGVAR(compiler, $1)=$CC
+ _LT_CC_BASENAME([$compiler])
+ GCC=$G77
+ if test -n "$compiler"; then
+ AC_MSG_CHECKING([if libtool supports shared libraries])
+ AC_MSG_RESULT([$can_build_shared])
+
+ AC_MSG_CHECKING([whether to build shared libraries])
+ test "$can_build_shared" = "no" && enable_shared=no
+
+ # On AIX, shared libraries and static libraries use the same namespace, and
+ # are all built from PIC.
+ case $host_os in
+ aix3*)
+ test "$enable_shared" = yes && enable_static=no
+ if test -n "$RANLIB"; then
+ archive_cmds="$archive_cmds~\$RANLIB \$lib"
+ postinstall_cmds='$RANLIB $lib'
+ fi
+ ;;
+ aix[[4-9]]*)
+ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+ test "$enable_shared" = yes && enable_static=no
+ fi
+ ;;
+ esac
+ AC_MSG_RESULT([$enable_shared])
+
+ AC_MSG_CHECKING([whether to build static libraries])
+ # Make sure either enable_shared or enable_static is yes.
+ test "$enable_shared" = yes || enable_static=yes
+ AC_MSG_RESULT([$enable_static])
+
+ _LT_TAGVAR(GCC, $1)="$G77"
+ _LT_TAGVAR(LD, $1)="$LD"
+
+ ## CAVEAT EMPTOR:
+ ## There is no encapsulation within the following macros, do not change
+ ## the running order or otherwise move them around unless you know exactly
+ ## what you are doing...
+ _LT_COMPILER_PIC($1)
+ _LT_COMPILER_C_O($1)
+ _LT_COMPILER_FILE_LOCKS($1)
+ _LT_LINKER_SHLIBS($1)
+ _LT_SYS_DYNAMIC_LINKER($1)
+ _LT_LINKER_HARDCODE_LIBPATH($1)
+
+ _LT_CONFIG($1)
+ fi # test -n "$compiler"
+
+ GCC=$lt_save_GCC
+ CC="$lt_save_CC"
+ CFLAGS="$lt_save_CFLAGS"
+fi # test "$_lt_disable_F77" != yes
+
+AC_LANG_POP
+])# _LT_LANG_F77_CONFIG
+
+
+# _LT_LANG_FC_CONFIG([TAG])
+# -------------------------
+# Ensure that the configuration variables for a Fortran compiler are
+# suitably defined. These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_FC_CONFIG],
+[AC_LANG_PUSH(Fortran)
+
+if test -z "$FC" || test "X$FC" = "Xno"; then
+ _lt_disable_FC=yes
+fi
+
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_TAGVAR(allow_undefined_flag, $1)=
+_LT_TAGVAR(always_export_symbols, $1)=no
+_LT_TAGVAR(archive_expsym_cmds, $1)=
+_LT_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_TAGVAR(hardcode_direct, $1)=no
+_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_TAGVAR(hardcode_minus_L, $1)=no
+_LT_TAGVAR(hardcode_automatic, $1)=no
+_LT_TAGVAR(inherit_rpath, $1)=no
+_LT_TAGVAR(module_cmds, $1)=
+_LT_TAGVAR(module_expsym_cmds, $1)=
+_LT_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+_LT_TAGVAR(no_undefined_flag, $1)=
+_LT_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+
+# Source file extension for fc test sources.
+ac_ext=${ac_fc_srcext-f}
+
+# Object file extension for compiled fc test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# No sense in running all these tests if we already determined that
+# the FC compiler isn't working. Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test "$_lt_disable_FC" != yes; then
+ # Code to be used in simple compile tests
+ lt_simple_compile_test_code="\
+ subroutine t
+ return
+ end
+"
+
+ # Code to be used in simple link tests
+ lt_simple_link_test_code="\
+ program t
+ end
+"
+
+ # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+ _LT_TAG_COMPILER
+
+ # save warnings/boilerplate of simple test code
+ _LT_COMPILER_BOILERPLATE
+ _LT_LINKER_BOILERPLATE
+
+ # Allow CC to be a program name with arguments.
+ lt_save_CC="$CC"
+ lt_save_GCC=$GCC
+ lt_save_CFLAGS=$CFLAGS
+ CC=${FC-"f95"}
+ CFLAGS=$FCFLAGS
+ compiler=$CC
+ GCC=$ac_cv_fc_compiler_gnu
+
+ _LT_TAGVAR(compiler, $1)=$CC
+ _LT_CC_BASENAME([$compiler])
+
+ if test -n "$compiler"; then
+ AC_MSG_CHECKING([if libtool supports shared libraries])
+ AC_MSG_RESULT([$can_build_shared])
+
+ AC_MSG_CHECKING([whether to build shared libraries])
+ test "$can_build_shared" = "no" && enable_shared=no
+
+ # On AIX, shared libraries and static libraries use the same namespace, and
+ # are all built from PIC.
+ case $host_os in
+ aix3*)
+ test "$enable_shared" = yes && enable_static=no
+ if test -n "$RANLIB"; then
+ archive_cmds="$archive_cmds~\$RANLIB \$lib"
+ postinstall_cmds='$RANLIB $lib'
+ fi
+ ;;
+ aix[[4-9]]*)
+ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+ test "$enable_shared" = yes && enable_static=no
+ fi
+ ;;
+ esac
+ AC_MSG_RESULT([$enable_shared])
+
+ AC_MSG_CHECKING([whether to build static libraries])
+ # Make sure either enable_shared or enable_static is yes.
+ test "$enable_shared" = yes || enable_static=yes
+ AC_MSG_RESULT([$enable_static])
+
+ _LT_TAGVAR(GCC, $1)="$ac_cv_fc_compiler_gnu"
+ _LT_TAGVAR(LD, $1)="$LD"
+
+ ## CAVEAT EMPTOR:
+ ## There is no encapsulation within the following macros, do not change
+ ## the running order or otherwise move them around unless you know exactly
+ ## what you are doing...
+ _LT_SYS_HIDDEN_LIBDEPS($1)
+ _LT_COMPILER_PIC($1)
+ _LT_COMPILER_C_O($1)
+ _LT_COMPILER_FILE_LOCKS($1)
+ _LT_LINKER_SHLIBS($1)
+ _LT_SYS_DYNAMIC_LINKER($1)
+ _LT_LINKER_HARDCODE_LIBPATH($1)
+
+ _LT_CONFIG($1)
+ fi # test -n "$compiler"
+
+ GCC=$lt_save_GCC
+ CC=$lt_save_CC
+ CFLAGS=$lt_save_CFLAGS
+fi # test "$_lt_disable_FC" != yes
+
+AC_LANG_POP
+])# _LT_LANG_FC_CONFIG
+
+
+# _LT_LANG_GCJ_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for the GNU Java Compiler compiler
+# are suitably defined. These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_GCJ_CONFIG],
+[AC_REQUIRE([LT_PROG_GCJ])dnl
+AC_LANG_SAVE
+
+# Source file extension for Java test sources.
+ac_ext=java
+
+# Object file extension for compiled Java test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="class foo {}"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }'
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_TAG_COMPILER
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+# Allow CC to be a program name with arguments.
+lt_save_CC=$CC
+lt_save_CFLAGS=$CFLAGS
+lt_save_GCC=$GCC
+GCC=yes
+CC=${GCJ-"gcj"}
+CFLAGS=$GCJFLAGS
+compiler=$CC
+_LT_TAGVAR(compiler, $1)=$CC
+_LT_TAGVAR(LD, $1)="$LD"
+_LT_CC_BASENAME([$compiler])
+
+# GCJ did not exist at the time GCC didn't implicitly link libc in.
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+
+if test -n "$compiler"; then
+ _LT_COMPILER_NO_RTTI($1)
+ _LT_COMPILER_PIC($1)
+ _LT_COMPILER_C_O($1)
+ _LT_COMPILER_FILE_LOCKS($1)
+ _LT_LINKER_SHLIBS($1)
+ _LT_LINKER_HARDCODE_LIBPATH($1)
+
+ _LT_CONFIG($1)
+fi
+
+AC_LANG_RESTORE
+
+GCC=$lt_save_GCC
+CC=$lt_save_CC
+CFLAGS=$lt_save_CFLAGS
+])# _LT_LANG_GCJ_CONFIG
+
+
+# _LT_LANG_GO_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for the GNU Go compiler
+# are suitably defined. These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_GO_CONFIG],
+[AC_REQUIRE([LT_PROG_GO])dnl
+AC_LANG_SAVE
+
+# Source file extension for Go test sources.
+ac_ext=go
+
+# Object file extension for compiled Go test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="package main; func main() { }"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='package main; func main() { }'
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_TAG_COMPILER
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+# Allow CC to be a program name with arguments.
+lt_save_CC=$CC
+lt_save_CFLAGS=$CFLAGS
+lt_save_GCC=$GCC
+GCC=yes
+CC=${GOC-"gccgo"}
+CFLAGS=$GOFLAGS
+compiler=$CC
+_LT_TAGVAR(compiler, $1)=$CC
+_LT_TAGVAR(LD, $1)="$LD"
+_LT_CC_BASENAME([$compiler])
+
+# Go did not exist at the time GCC didn't implicitly link libc in.
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+
+if test -n "$compiler"; then
+ _LT_COMPILER_NO_RTTI($1)
+ _LT_COMPILER_PIC($1)
+ _LT_COMPILER_C_O($1)
+ _LT_COMPILER_FILE_LOCKS($1)
+ _LT_LINKER_SHLIBS($1)
+ _LT_LINKER_HARDCODE_LIBPATH($1)
+
+ _LT_CONFIG($1)
+fi
+
+AC_LANG_RESTORE
+
+GCC=$lt_save_GCC
+CC=$lt_save_CC
+CFLAGS=$lt_save_CFLAGS
+])# _LT_LANG_GO_CONFIG
+
+
+# _LT_LANG_RC_CONFIG([TAG])
+# -------------------------
+# Ensure that the configuration variables for the Windows resource compiler
+# are suitably defined. These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_RC_CONFIG],
+[AC_REQUIRE([LT_PROG_RC])dnl
+AC_LANG_SAVE
+
+# Source file extension for RC test sources.
+ac_ext=rc
+
+# Object file extension for compiled RC test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
+
+# Code to be used in simple link tests
+lt_simple_link_test_code="$lt_simple_compile_test_code"
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_TAG_COMPILER
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+# Allow CC to be a program name with arguments.
+lt_save_CC="$CC"
+lt_save_CFLAGS=$CFLAGS
+lt_save_GCC=$GCC
+GCC=
+CC=${RC-"windres"}
+CFLAGS=
+compiler=$CC
+_LT_TAGVAR(compiler, $1)=$CC
+_LT_CC_BASENAME([$compiler])
+_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
+
+if test -n "$compiler"; then
+ :
+ _LT_CONFIG($1)
+fi
+
+GCC=$lt_save_GCC
+AC_LANG_RESTORE
+CC=$lt_save_CC
+CFLAGS=$lt_save_CFLAGS
+])# _LT_LANG_RC_CONFIG
+
+
+# LT_PROG_GCJ
+# -----------
+AC_DEFUN([LT_PROG_GCJ],
+[m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ],
+ [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ],
+ [AC_CHECK_TOOL(GCJ, gcj,)
+ test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
+ AC_SUBST(GCJFLAGS)])])[]dnl
])
-AC_DEFUN([LT_AC_PROG_RC],
-[AC_CHECK_TOOL(RC, windres, no)
+# Old name:
+AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([LT_AC_PROG_GCJ], [])
+
+
+# LT_PROG_GO
+# ----------
+AC_DEFUN([LT_PROG_GO],
+[AC_CHECK_TOOL(GOC, gccgo,)
])
-# Cheap backport of AS_EXECUTABLE_P and required macros
-# from Autoconf 2.59; we should not use $as_executable_p directly.
+# LT_PROG_RC
+# ----------
+AC_DEFUN([LT_PROG_RC],
+[AC_CHECK_TOOL(RC, windres,)
+])
-# _AS_TEST_PREPARE
+# Old name:
+AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([LT_AC_PROG_RC], [])
+
+
+# _LT_DECL_EGREP
+# --------------
+# If we don't have a new enough Autoconf to choose the best grep
+# available, choose the one first in the user's PATH.
+m4_defun([_LT_DECL_EGREP],
+[AC_REQUIRE([AC_PROG_EGREP])dnl
+AC_REQUIRE([AC_PROG_FGREP])dnl
+test -z "$GREP" && GREP=grep
+_LT_DECL([], [GREP], [1], [A grep program that handles long lines])
+_LT_DECL([], [EGREP], [1], [An ERE matcher])
+_LT_DECL([], [FGREP], [1], [A literal string matcher])
+dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too
+AC_SUBST([GREP])
+])
+
+
+# _LT_DECL_OBJDUMP
+# --------------
+# If we don't have a new enough Autoconf to choose the best objdump
+# available, choose the one first in the user's PATH.
+m4_defun([_LT_DECL_OBJDUMP],
+[AC_CHECK_TOOL(OBJDUMP, objdump, false)
+test -z "$OBJDUMP" && OBJDUMP=objdump
+_LT_DECL([], [OBJDUMP], [1], [An object symbol dumper])
+AC_SUBST([OBJDUMP])
+])
+
+# _LT_DECL_DLLTOOL
# ----------------
-m4_ifndef([_AS_TEST_PREPARE],
-[m4_defun([_AS_TEST_PREPARE],
-[if test -x / >/dev/null 2>&1; then
- as_executable_p='test -x'
-else
- as_executable_p='test -f'
-fi
-])])# _AS_TEST_PREPARE
+# Ensure DLLTOOL variable is set.
+m4_defun([_LT_DECL_DLLTOOL],
+[AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+_LT_DECL([], [DLLTOOL], [1], [DLL creation program])
+AC_SUBST([DLLTOOL])
+])
-# AS_EXECUTABLE_P
-# ---------------
-# Check whether a file is executable.
-m4_ifndef([AS_EXECUTABLE_P],
-[m4_defun([AS_EXECUTABLE_P],
-[AS_REQUIRE([_AS_TEST_PREPARE])dnl
-$as_executable_p $1[]dnl
-])])# AS_EXECUTABLE_P
+# _LT_DECL_SED
+# ------------
+# Check for a fully-functional sed program, that truncates
+# as few characters as possible. Prefer GNU sed if found.
+m4_defun([_LT_DECL_SED],
+[AC_PROG_SED
+test -z "$SED" && SED=sed
+Xsed="$SED -e 1s/^X//"
+_LT_DECL([], [SED], [1], [A sed program that does not truncate output])
+_LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"],
+ [Sed that helps us avoid accidentally triggering echo(1) options like -n])
+])# _LT_DECL_SED
+m4_ifndef([AC_PROG_SED], [
# NOTE: This macro has been submitted for inclusion into #
# GNU Autoconf as AC_PROG_SED. When it is available in #
# a released version of Autoconf we should remove this #
# macro and use it instead. #
-# LT_AC_PROG_SED
-# --------------
-# Check for a fully-functional sed program, that truncates
-# as few characters as possible. Prefer GNU sed if found.
-AC_DEFUN([LT_AC_PROG_SED],
+
+m4_defun([AC_PROG_SED],
[AC_MSG_CHECKING([for a sed that does not truncate output])
AC_CACHE_VAL(lt_cv_path_SED,
[# Loop through the user's path and test for sed and gsed.
@@ -6612,7 +7721,7 @@
test -z "$as_dir" && as_dir=.
for lt_ac_prog in sed gsed; do
for ac_exec_ext in '' $ac_executable_extensions; do
- if AS_EXECUTABLE_P(["$as_dir/$lt_ac_prog$ac_exec_ext"]); then
+ if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
fi
done
@@ -6653,14 +7762,858 @@
SED=$lt_cv_path_SED
AC_SUBST([SED])
AC_MSG_RESULT([$SED])
+])#AC_PROG_SED
+])#m4_ifndef
+
+# Old name:
+AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([LT_AC_PROG_SED], [])
+
+
+# _LT_CHECK_SHELL_FEATURES
+# ------------------------
+# Find out whether the shell is Bourne or XSI compatible,
+# or has some other useful features.
+m4_defun([_LT_CHECK_SHELL_FEATURES],
+[AC_MSG_CHECKING([whether the shell understands some XSI constructs])
+# Try some XSI features
+xsi_shell=no
+( _lt_dummy="a/b/c"
+ test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \
+ = c,a/b,b/c, \
+ && eval 'test $(( 1 + 1 )) -eq 2 \
+ && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
+ && xsi_shell=yes
+AC_MSG_RESULT([$xsi_shell])
+_LT_CONFIG_LIBTOOL_INIT([xsi_shell='$xsi_shell'])
+
+AC_MSG_CHECKING([whether the shell understands "+="])
+lt_shell_append=no
+( foo=bar; set foo baz; eval "$[1]+=\$[2]" && test "$foo" = barbaz ) \
+ >/dev/null 2>&1 \
+ && lt_shell_append=yes
+AC_MSG_RESULT([$lt_shell_append])
+_LT_CONFIG_LIBTOOL_INIT([lt_shell_append='$lt_shell_append'])
+
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+ lt_unset=unset
+else
+ lt_unset=false
+fi
+_LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl
+
+# test EBCDIC or ASCII
+case `echo X|tr X '\101'` in
+ A) # ASCII based system
+ # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
+ lt_SP2NL='tr \040 \012'
+ lt_NL2SP='tr \015\012 \040\040'
+ ;;
+ *) # EBCDIC based system
+ lt_SP2NL='tr \100 \n'
+ lt_NL2SP='tr \r\n \100\100'
+ ;;
+esac
+_LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl
+_LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl
+])# _LT_CHECK_SHELL_FEATURES
+
+
+# _LT_PROG_FUNCTION_REPLACE (FUNCNAME, REPLACEMENT-BODY)
+# ------------------------------------------------------
+# In `$cfgfile', look for function FUNCNAME delimited by `^FUNCNAME ()$' and
+# '^} FUNCNAME ', and replace its body with REPLACEMENT-BODY.
+m4_defun([_LT_PROG_FUNCTION_REPLACE],
+[dnl {
+sed -e '/^$1 ()$/,/^} # $1 /c\
+$1 ()\
+{\
+m4_bpatsubsts([$2], [$], [\\], [^\([ ]\)], [\\\1])
+} # Extended-shell $1 implementation' "$cfgfile" > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
])
-# Copyright (C) 2002, 2003, 2005, 2006, 2007 Free Software Foundation, Inc.
+
+# _LT_PROG_REPLACE_SHELLFNS
+# -------------------------
+# Replace existing portable implementations of several shell functions with
+# equivalent extended shell implementations where those features are available..
+m4_defun([_LT_PROG_REPLACE_SHELLFNS],
+[if test x"$xsi_shell" = xyes; then
+ _LT_PROG_FUNCTION_REPLACE([func_dirname], [dnl
+ case ${1} in
+ */*) func_dirname_result="${1%/*}${2}" ;;
+ * ) func_dirname_result="${3}" ;;
+ esac])
+
+ _LT_PROG_FUNCTION_REPLACE([func_basename], [dnl
+ func_basename_result="${1##*/}"])
+
+ _LT_PROG_FUNCTION_REPLACE([func_dirname_and_basename], [dnl
+ case ${1} in
+ */*) func_dirname_result="${1%/*}${2}" ;;
+ * ) func_dirname_result="${3}" ;;
+ esac
+ func_basename_result="${1##*/}"])
+
+ _LT_PROG_FUNCTION_REPLACE([func_stripname], [dnl
+ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
+ # positional parameters, so assign one to ordinary parameter first.
+ func_stripname_result=${3}
+ func_stripname_result=${func_stripname_result#"${1}"}
+ func_stripname_result=${func_stripname_result%"${2}"}])
+
+ _LT_PROG_FUNCTION_REPLACE([func_split_long_opt], [dnl
+ func_split_long_opt_name=${1%%=*}
+ func_split_long_opt_arg=${1#*=}])
+
+ _LT_PROG_FUNCTION_REPLACE([func_split_short_opt], [dnl
+ func_split_short_opt_arg=${1#??}
+ func_split_short_opt_name=${1%"$func_split_short_opt_arg"}])
+
+ _LT_PROG_FUNCTION_REPLACE([func_lo2o], [dnl
+ case ${1} in
+ *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
+ *) func_lo2o_result=${1} ;;
+ esac])
+
+ _LT_PROG_FUNCTION_REPLACE([func_xform], [ func_xform_result=${1%.*}.lo])
+
+ _LT_PROG_FUNCTION_REPLACE([func_arith], [ func_arith_result=$(( $[*] ))])
+
+ _LT_PROG_FUNCTION_REPLACE([func_len], [ func_len_result=${#1}])
+fi
+
+if test x"$lt_shell_append" = xyes; then
+ _LT_PROG_FUNCTION_REPLACE([func_append], [ eval "${1}+=\\${2}"])
+
+ _LT_PROG_FUNCTION_REPLACE([func_append_quoted], [dnl
+ func_quote_for_eval "${2}"
+dnl m4 expansion turns \\\\ into \\, and then the shell eval turns that into \
+ eval "${1}+=\\\\ \\$func_quote_for_eval_result"])
+
+ # Save a `func_append' function call where possible by direct use of '+='
+ sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+ test 0 -eq $? || _lt_function_replace_fail=:
+else
+ # Save a `func_append' function call even when '+=' is not available
+ sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+ test 0 -eq $? || _lt_function_replace_fail=:
+fi
+
+if test x"$_lt_function_replace_fail" = x":"; then
+ AC_MSG_WARN([Unable to substitute extended shell functions in $ofile])
+fi
+])
+
+# _LT_PATH_CONVERSION_FUNCTIONS
+# -----------------------------
+# Determine which file name conversion functions should be used by
+# func_to_host_file (and, implicitly, by func_to_host_path). These are needed
+# for certain cross-compile configurations and native mingw.
+m4_defun([_LT_PATH_CONVERSION_FUNCTIONS],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+AC_MSG_CHECKING([how to convert $build file names to $host format])
+AC_CACHE_VAL(lt_cv_to_host_file_cmd,
+[case $host in
+ *-*-mingw* )
+ case $build in
+ *-*-mingw* ) # actually msys
+ lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32
+ ;;
+ *-*-cygwin* )
+ lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32
+ ;;
+ * ) # otherwise, assume *nix
+ lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32
+ ;;
+ esac
+ ;;
+ *-*-cygwin* )
+ case $build in
+ *-*-mingw* ) # actually msys
+ lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin
+ ;;
+ *-*-cygwin* )
+ lt_cv_to_host_file_cmd=func_convert_file_noop
+ ;;
+ * ) # otherwise, assume *nix
+ lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin
+ ;;
+ esac
+ ;;
+ * ) # unhandled hosts (and "normal" native builds)
+ lt_cv_to_host_file_cmd=func_convert_file_noop
+ ;;
+esac
+])
+to_host_file_cmd=$lt_cv_to_host_file_cmd
+AC_MSG_RESULT([$lt_cv_to_host_file_cmd])
+_LT_DECL([to_host_file_cmd], [lt_cv_to_host_file_cmd],
+ [0], [convert $build file names to $host format])dnl
+
+AC_MSG_CHECKING([how to convert $build file names to toolchain format])
+AC_CACHE_VAL(lt_cv_to_tool_file_cmd,
+[#assume ordinary cross tools, or native build.
+lt_cv_to_tool_file_cmd=func_convert_file_noop
+case $host in
+ *-*-mingw* )
+ case $build in
+ *-*-mingw* ) # actually msys
+ lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32
+ ;;
+ esac
+ ;;
+esac
+])
+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
+AC_MSG_RESULT([$lt_cv_to_tool_file_cmd])
+_LT_DECL([to_tool_file_cmd], [lt_cv_to_tool_file_cmd],
+ [0], [convert $build files to toolchain format])dnl
+])# _LT_PATH_CONVERSION_FUNCTIONS
+
+# Helper functions for option handling. -*- Autoconf -*-
#
+# Copyright (C) 2004, 2005, 2007, 2008, 2009 Free Software Foundation,
+# Inc.
+# Written by Gary V. Vaughan, 2004
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+# serial 7 ltoptions.m4
+
+# This is to help aclocal find these macros, as it can't see m4_define.
+AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])])
+
+
+# _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME)
+# ------------------------------------------
+m4_define([_LT_MANGLE_OPTION],
+[[_LT_OPTION_]m4_bpatsubst($1__$2, [[^a-zA-Z0-9_]], [_])])
+
+
+# _LT_SET_OPTION(MACRO-NAME, OPTION-NAME)
+# ---------------------------------------
+# Set option OPTION-NAME for macro MACRO-NAME, and if there is a
+# matching handler defined, dispatch to it. Other OPTION-NAMEs are
+# saved as a flag.
+m4_define([_LT_SET_OPTION],
+[m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl
+m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]),
+ _LT_MANGLE_DEFUN([$1], [$2]),
+ [m4_warning([Unknown $1 option `$2'])])[]dnl
+])
+
+
+# _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET])
+# ------------------------------------------------------------
+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+m4_define([_LT_IF_OPTION],
+[m4_ifdef(_LT_MANGLE_OPTION([$1], [$2]), [$3], [$4])])
+
+
+# _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET)
+# -------------------------------------------------------
+# Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME
+# are set.
+m4_define([_LT_UNLESS_OPTIONS],
+[m4_foreach([_LT_Option], m4_split(m4_normalize([$2])),
+ [m4_ifdef(_LT_MANGLE_OPTION([$1], _LT_Option),
+ [m4_define([$0_found])])])[]dnl
+m4_ifdef([$0_found], [m4_undefine([$0_found])], [$3
+])[]dnl
+])
+
+
+# _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST)
+# ----------------------------------------
+# OPTION-LIST is a space-separated list of Libtool options associated
+# with MACRO-NAME. If any OPTION has a matching handler declared with
+# LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about
+# the unknown option and exit.
+m4_defun([_LT_SET_OPTIONS],
+[# Set options
+m4_foreach([_LT_Option], m4_split(m4_normalize([$2])),
+ [_LT_SET_OPTION([$1], _LT_Option)])
+
+m4_if([$1],[LT_INIT],[
+ dnl
+ dnl Simply set some default values (i.e off) if boolean options were not
+ dnl specified:
+ _LT_UNLESS_OPTIONS([LT_INIT], [dlopen], [enable_dlopen=no
+ ])
+ _LT_UNLESS_OPTIONS([LT_INIT], [win32-dll], [enable_win32_dll=no
+ ])
+ dnl
+ dnl If no reference was made to various pairs of opposing options, then
+ dnl we run the default mode handler for the pair. For example, if neither
+ dnl `shared' nor `disable-shared' was passed, we enable building of shared
+ dnl archives by default:
+ _LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED])
+ _LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC])
+ _LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC])
+ _LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install],
+ [_LT_ENABLE_FAST_INSTALL])
+ ])
+])# _LT_SET_OPTIONS
+
+
+
+# _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME)
+# -----------------------------------------
+m4_define([_LT_MANGLE_DEFUN],
+[[_LT_OPTION_DEFUN_]m4_bpatsubst(m4_toupper([$1__$2]), [[^A-Z0-9_]], [_])])
+
+
+# LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE)
+# -----------------------------------------------
+m4_define([LT_OPTION_DEFINE],
+[m4_define(_LT_MANGLE_DEFUN([$1], [$2]), [$3])[]dnl
+])# LT_OPTION_DEFINE
+
+
+# dlopen
+# ------
+LT_OPTION_DEFINE([LT_INIT], [dlopen], [enable_dlopen=yes
+])
+
+AU_DEFUN([AC_LIBTOOL_DLOPEN],
+[_LT_SET_OPTION([LT_INIT], [dlopen])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you
+put the `dlopen' option into LT_INIT's first parameter.])
+])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_DLOPEN], [])
+
+
+# win32-dll
+# ---------
+# Declare package support for building win32 dll's.
+LT_OPTION_DEFINE([LT_INIT], [win32-dll],
+[enable_win32_dll=yes
+
+case $host in
+*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*)
+ AC_CHECK_TOOL(AS, as, false)
+ AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+ AC_CHECK_TOOL(OBJDUMP, objdump, false)
+ ;;
+esac
+
+test -z "$AS" && AS=as
+_LT_DECL([], [AS], [1], [Assembler program])dnl
+
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+_LT_DECL([], [DLLTOOL], [1], [DLL creation program])dnl
+
+test -z "$OBJDUMP" && OBJDUMP=objdump
+_LT_DECL([], [OBJDUMP], [1], [Object dumper program])dnl
+])# win32-dll
+
+AU_DEFUN([AC_LIBTOOL_WIN32_DLL],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+_LT_SET_OPTION([LT_INIT], [win32-dll])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you
+put the `win32-dll' option into LT_INIT's first parameter.])
+])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [])
+
+
+# _LT_ENABLE_SHARED([DEFAULT])
+# ----------------------------
+# implement the --enable-shared flag, and supports the `shared' and
+# `disable-shared' LT_INIT options.
+# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
+m4_define([_LT_ENABLE_SHARED],
+[m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl
+AC_ARG_ENABLE([shared],
+ [AS_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
+ [build shared libraries @<:@default=]_LT_ENABLE_SHARED_DEFAULT[@:>@])],
+ [p=${PACKAGE-default}
+ case $enableval in
+ yes) enable_shared=yes ;;
+ no) enable_shared=no ;;
+ *)
+ enable_shared=no
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ for pkg in $enableval; do
+ IFS="$lt_save_ifs"
+ if test "X$pkg" = "X$p"; then
+ enable_shared=yes
+ fi
+ done
+ IFS="$lt_save_ifs"
+ ;;
+ esac],
+ [enable_shared=]_LT_ENABLE_SHARED_DEFAULT)
+
+ _LT_DECL([build_libtool_libs], [enable_shared], [0],
+ [Whether or not to build shared libraries])
+])# _LT_ENABLE_SHARED
+
+LT_OPTION_DEFINE([LT_INIT], [shared], [_LT_ENABLE_SHARED([yes])])
+LT_OPTION_DEFINE([LT_INIT], [disable-shared], [_LT_ENABLE_SHARED([no])])
+
+# Old names:
+AC_DEFUN([AC_ENABLE_SHARED],
+[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared])
+])
+
+AC_DEFUN([AC_DISABLE_SHARED],
+[_LT_SET_OPTION([LT_INIT], [disable-shared])
+])
+
+AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)])
+AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_ENABLE_SHARED], [])
+dnl AC_DEFUN([AM_DISABLE_SHARED], [])
+
+
+
+# _LT_ENABLE_STATIC([DEFAULT])
+# ----------------------------
+# implement the --enable-static flag, and support the `static' and
+# `disable-static' LT_INIT options.
+# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
+m4_define([_LT_ENABLE_STATIC],
+[m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl
+AC_ARG_ENABLE([static],
+ [AS_HELP_STRING([--enable-static@<:@=PKGS@:>@],
+ [build static libraries @<:@default=]_LT_ENABLE_STATIC_DEFAULT[@:>@])],
+ [p=${PACKAGE-default}
+ case $enableval in
+ yes) enable_static=yes ;;
+ no) enable_static=no ;;
+ *)
+ enable_static=no
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ for pkg in $enableval; do
+ IFS="$lt_save_ifs"
+ if test "X$pkg" = "X$p"; then
+ enable_static=yes
+ fi
+ done
+ IFS="$lt_save_ifs"
+ ;;
+ esac],
+ [enable_static=]_LT_ENABLE_STATIC_DEFAULT)
+
+ _LT_DECL([build_old_libs], [enable_static], [0],
+ [Whether or not to build static libraries])
+])# _LT_ENABLE_STATIC
+
+LT_OPTION_DEFINE([LT_INIT], [static], [_LT_ENABLE_STATIC([yes])])
+LT_OPTION_DEFINE([LT_INIT], [disable-static], [_LT_ENABLE_STATIC([no])])
+
+# Old names:
+AC_DEFUN([AC_ENABLE_STATIC],
+[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static])
+])
+
+AC_DEFUN([AC_DISABLE_STATIC],
+[_LT_SET_OPTION([LT_INIT], [disable-static])
+])
+
+AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)])
+AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_ENABLE_STATIC], [])
+dnl AC_DEFUN([AM_DISABLE_STATIC], [])
+
+
+
+# _LT_ENABLE_FAST_INSTALL([DEFAULT])
+# ----------------------------------
+# implement the --enable-fast-install flag, and support the `fast-install'
+# and `disable-fast-install' LT_INIT options.
+# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
+m4_define([_LT_ENABLE_FAST_INSTALL],
+[m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl
+AC_ARG_ENABLE([fast-install],
+ [AS_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
+ [optimize for fast installation @<:@default=]_LT_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
+ [p=${PACKAGE-default}
+ case $enableval in
+ yes) enable_fast_install=yes ;;
+ no) enable_fast_install=no ;;
+ *)
+ enable_fast_install=no
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ for pkg in $enableval; do
+ IFS="$lt_save_ifs"
+ if test "X$pkg" = "X$p"; then
+ enable_fast_install=yes
+ fi
+ done
+ IFS="$lt_save_ifs"
+ ;;
+ esac],
+ [enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT)
+
+_LT_DECL([fast_install], [enable_fast_install], [0],
+ [Whether or not to optimize for fast installation])dnl
+])# _LT_ENABLE_FAST_INSTALL
+
+LT_OPTION_DEFINE([LT_INIT], [fast-install], [_LT_ENABLE_FAST_INSTALL([yes])])
+LT_OPTION_DEFINE([LT_INIT], [disable-fast-install], [_LT_ENABLE_FAST_INSTALL([no])])
+
+# Old names:
+AU_DEFUN([AC_ENABLE_FAST_INSTALL],
+[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you put
+the `fast-install' option into LT_INIT's first parameter.])
+])
+
+AU_DEFUN([AC_DISABLE_FAST_INSTALL],
+[_LT_SET_OPTION([LT_INIT], [disable-fast-install])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you put
+the `disable-fast-install' option into LT_INIT's first parameter.])
+])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_ENABLE_FAST_INSTALL], [])
+dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], [])
+
+
+# _LT_WITH_PIC([MODE])
+# --------------------
+# implement the --with-pic flag, and support the `pic-only' and `no-pic'
+# LT_INIT options.
+# MODE is either `yes' or `no'. If omitted, it defaults to `both'.
+m4_define([_LT_WITH_PIC],
+[AC_ARG_WITH([pic],
+ [AS_HELP_STRING([--with-pic@<:@=PKGS@:>@],
+ [try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
+ [lt_p=${PACKAGE-default}
+ case $withval in
+ yes|no) pic_mode=$withval ;;
+ *)
+ pic_mode=default
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ for lt_pkg in $withval; do
+ IFS="$lt_save_ifs"
+ if test "X$lt_pkg" = "X$lt_p"; then
+ pic_mode=yes
+ fi
+ done
+ IFS="$lt_save_ifs"
+ ;;
+ esac],
+ [pic_mode=default])
+
+test -z "$pic_mode" && pic_mode=m4_default([$1], [default])
+
+_LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl
+])# _LT_WITH_PIC
+
+LT_OPTION_DEFINE([LT_INIT], [pic-only], [_LT_WITH_PIC([yes])])
+LT_OPTION_DEFINE([LT_INIT], [no-pic], [_LT_WITH_PIC([no])])
+
+# Old name:
+AU_DEFUN([AC_LIBTOOL_PICMODE],
+[_LT_SET_OPTION([LT_INIT], [pic-only])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you
+put the `pic-only' option into LT_INIT's first parameter.])
+])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_PICMODE], [])
+
+
+m4_define([_LTDL_MODE], [])
+LT_OPTION_DEFINE([LTDL_INIT], [nonrecursive],
+ [m4_define([_LTDL_MODE], [nonrecursive])])
+LT_OPTION_DEFINE([LTDL_INIT], [recursive],
+ [m4_define([_LTDL_MODE], [recursive])])
+LT_OPTION_DEFINE([LTDL_INIT], [subproject],
+ [m4_define([_LTDL_MODE], [subproject])])
+
+m4_define([_LTDL_TYPE], [])
+LT_OPTION_DEFINE([LTDL_INIT], [installable],
+ [m4_define([_LTDL_TYPE], [installable])])
+LT_OPTION_DEFINE([LTDL_INIT], [convenience],
+ [m4_define([_LTDL_TYPE], [convenience])])
+
+# ltsugar.m4 -- libtool m4 base layer. -*-Autoconf-*-
+#
+# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc.
+# Written by Gary V. Vaughan, 2004
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+# serial 6 ltsugar.m4
+
+# This is to help aclocal find these macros, as it can't see m4_define.
+AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])])
+
+
+# lt_join(SEP, ARG1, [ARG2...])
+# -----------------------------
+# Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their
+# associated separator.
+# Needed until we can rely on m4_join from Autoconf 2.62, since all earlier
+# versions in m4sugar had bugs.
+m4_define([lt_join],
+[m4_if([$#], [1], [],
+ [$#], [2], [[$2]],
+ [m4_if([$2], [], [], [[$2]_])$0([$1], m4_shift(m4_shift($@)))])])
+m4_define([_lt_join],
+[m4_if([$#$2], [2], [],
+ [m4_if([$2], [], [], [[$1$2]])$0([$1], m4_shift(m4_shift($@)))])])
+
+
+# lt_car(LIST)
+# lt_cdr(LIST)
+# ------------
+# Manipulate m4 lists.
+# These macros are necessary as long as will still need to support
+# Autoconf-2.59 which quotes differently.
+m4_define([lt_car], [[$1]])
+m4_define([lt_cdr],
+[m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])],
+ [$#], 1, [],
+ [m4_dquote(m4_shift($@))])])
+m4_define([lt_unquote], $1)
+
+
+# lt_append(MACRO-NAME, STRING, [SEPARATOR])
+# ------------------------------------------
+# Redefine MACRO-NAME to hold its former content plus `SEPARATOR'`STRING'.
+# Note that neither SEPARATOR nor STRING are expanded; they are appended
+# to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked).
+# No SEPARATOR is output if MACRO-NAME was previously undefined (different
+# than defined and empty).
+#
+# This macro is needed until we can rely on Autoconf 2.62, since earlier
+# versions of m4sugar mistakenly expanded SEPARATOR but not STRING.
+m4_define([lt_append],
+[m4_define([$1],
+ m4_ifdef([$1], [m4_defn([$1])[$3]])[$2])])
+
+
+
+# lt_combine(SEP, PREFIX-LIST, INFIX, SUFFIX1, [SUFFIX2...])
+# ----------------------------------------------------------
+# Produce a SEP delimited list of all paired combinations of elements of
+# PREFIX-LIST with SUFFIX1 through SUFFIXn. Each element of the list
+# has the form PREFIXmINFIXSUFFIXn.
+# Needed until we can rely on m4_combine added in Autoconf 2.62.
+m4_define([lt_combine],
+[m4_if(m4_eval([$# > 3]), [1],
+ [m4_pushdef([_Lt_sep], [m4_define([_Lt_sep], m4_defn([lt_car]))])]]dnl
+[[m4_foreach([_Lt_prefix], [$2],
+ [m4_foreach([_Lt_suffix],
+ ]m4_dquote(m4_dquote(m4_shift(m4_shift(m4_shift($@)))))[,
+ [_Lt_sep([$1])[]m4_defn([_Lt_prefix])[$3]m4_defn([_Lt_suffix])])])])])
+
+
+# lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ])
+# -----------------------------------------------------------------------
+# Iff MACRO-NAME does not yet contain VARNAME, then append it (delimited
+# by SEPARATOR if supplied) and expand UNIQ, else NOT-UNIQ.
+m4_define([lt_if_append_uniq],
+[m4_ifdef([$1],
+ [m4_if(m4_index([$3]m4_defn([$1])[$3], [$3$2$3]), [-1],
+ [lt_append([$1], [$2], [$3])$4],
+ [$5])],
+ [lt_append([$1], [$2], [$3])$4])])
+
+
+# lt_dict_add(DICT, KEY, VALUE)
+# -----------------------------
+m4_define([lt_dict_add],
+[m4_define([$1($2)], [$3])])
+
+
+# lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE)
+# --------------------------------------------
+m4_define([lt_dict_add_subkey],
+[m4_define([$1($2:$3)], [$4])])
+
+
+# lt_dict_fetch(DICT, KEY, [SUBKEY])
+# ----------------------------------
+m4_define([lt_dict_fetch],
+[m4_ifval([$3],
+ m4_ifdef([$1($2:$3)], [m4_defn([$1($2:$3)])]),
+ m4_ifdef([$1($2)], [m4_defn([$1($2)])]))])
+
+
+# lt_if_dict_fetch(DICT, KEY, [SUBKEY], VALUE, IF-TRUE, [IF-FALSE])
+# -----------------------------------------------------------------
+m4_define([lt_if_dict_fetch],
+[m4_if(lt_dict_fetch([$1], [$2], [$3]), [$4],
+ [$5],
+ [$6])])
+
+
+# lt_dict_filter(DICT, [SUBKEY], VALUE, [SEPARATOR], KEY, [...])
+# --------------------------------------------------------------
+m4_define([lt_dict_filter],
+[m4_if([$5], [], [],
+ [lt_join(m4_quote(m4_default([$4], [[, ]])),
+ lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_key, lt_car([m4_shiftn(4, $@)]),
+ [lt_if_dict_fetch([$1], _Lt_key, [$2], [$3], [_Lt_key ])])))))])[]dnl
+])
+
+# ltversion.m4 -- version numbers -*- Autoconf -*-
+#
+# Copyright (C) 2004 Free Software Foundation, Inc.
+# Written by Scott James Remnant, 2004
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+# @configure_input@
+
+# serial 3337 ltversion.m4
+# This file is part of GNU Libtool
+
+m4_define([LT_PACKAGE_VERSION], [2.4.2])
+m4_define([LT_PACKAGE_REVISION], [1.3337])
+
+AC_DEFUN([LTVERSION_VERSION],
+[macro_version='2.4.2'
+macro_revision='1.3337'
+_LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?])
+_LT_DECL(, macro_revision, 0)
+])
+
+# lt~obsolete.m4 -- aclocal satisfying obsolete definitions. -*-Autoconf-*-
+#
+# Copyright (C) 2004, 2005, 2007, 2009 Free Software Foundation, Inc.
+# Written by Scott James Remnant, 2004.
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+# serial 5 lt~obsolete.m4
+
+# These exist entirely to fool aclocal when bootstrapping libtool.
+#
+# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN)
+# which have later been changed to m4_define as they aren't part of the
+# exported API, or moved to Autoconf or Automake where they belong.
+#
+# The trouble is, aclocal is a bit thick. It'll see the old AC_DEFUN
+# in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us
+# using a macro with the same name in our local m4/libtool.m4 it'll
+# pull the old libtool.m4 in (it doesn't see our shiny new m4_define
+# and doesn't know about Autoconf macros at all.)
+#
+# So we provide this file, which has a silly filename so it's always
+# included after everything else. This provides aclocal with the
+# AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything
+# because those macros already exist, or will be overwritten later.
+# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6.
+#
+# Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here.
+# Yes, that means every name once taken will need to remain here until
+# we give up compatibility with versions before 1.7, at which point
+# we need to keep only those names which we still refer to.
+
+# This is to help aclocal find these macros, as it can't see m4_define.
+AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])])
+
+m4_ifndef([AC_LIBTOOL_LINKER_OPTION], [AC_DEFUN([AC_LIBTOOL_LINKER_OPTION])])
+m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP])])
+m4_ifndef([_LT_AC_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH])])
+m4_ifndef([_LT_AC_SHELL_INIT], [AC_DEFUN([_LT_AC_SHELL_INIT])])
+m4_ifndef([_LT_AC_SYS_LIBPATH_AIX], [AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX])])
+m4_ifndef([_LT_PROG_LTMAIN], [AC_DEFUN([_LT_PROG_LTMAIN])])
+m4_ifndef([_LT_AC_TAGVAR], [AC_DEFUN([_LT_AC_TAGVAR])])
+m4_ifndef([AC_LTDL_ENABLE_INSTALL], [AC_DEFUN([AC_LTDL_ENABLE_INSTALL])])
+m4_ifndef([AC_LTDL_PREOPEN], [AC_DEFUN([AC_LTDL_PREOPEN])])
+m4_ifndef([_LT_AC_SYS_COMPILER], [AC_DEFUN([_LT_AC_SYS_COMPILER])])
+m4_ifndef([_LT_AC_LOCK], [AC_DEFUN([_LT_AC_LOCK])])
+m4_ifndef([AC_LIBTOOL_SYS_OLD_ARCHIVE], [AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE])])
+m4_ifndef([_LT_AC_TRY_DLOPEN_SELF], [AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF])])
+m4_ifndef([AC_LIBTOOL_PROG_CC_C_O], [AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O])])
+m4_ifndef([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS])])
+m4_ifndef([AC_LIBTOOL_OBJDIR], [AC_DEFUN([AC_LIBTOOL_OBJDIR])])
+m4_ifndef([AC_LTDL_OBJDIR], [AC_DEFUN([AC_LTDL_OBJDIR])])
+m4_ifndef([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH])])
+m4_ifndef([AC_LIBTOOL_SYS_LIB_STRIP], [AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP])])
+m4_ifndef([AC_PATH_MAGIC], [AC_DEFUN([AC_PATH_MAGIC])])
+m4_ifndef([AC_PROG_LD_GNU], [AC_DEFUN([AC_PROG_LD_GNU])])
+m4_ifndef([AC_PROG_LD_RELOAD_FLAG], [AC_DEFUN([AC_PROG_LD_RELOAD_FLAG])])
+m4_ifndef([AC_DEPLIBS_CHECK_METHOD], [AC_DEFUN([AC_DEPLIBS_CHECK_METHOD])])
+m4_ifndef([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI])])
+m4_ifndef([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])])
+m4_ifndef([AC_LIBTOOL_PROG_COMPILER_PIC], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC])])
+m4_ifndef([AC_LIBTOOL_PROG_LD_SHLIBS], [AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS])])
+m4_ifndef([AC_LIBTOOL_POSTDEP_PREDEP], [AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP])])
+m4_ifndef([LT_AC_PROG_EGREP], [AC_DEFUN([LT_AC_PROG_EGREP])])
+m4_ifndef([LT_AC_PROG_SED], [AC_DEFUN([LT_AC_PROG_SED])])
+m4_ifndef([_LT_CC_BASENAME], [AC_DEFUN([_LT_CC_BASENAME])])
+m4_ifndef([_LT_COMPILER_BOILERPLATE], [AC_DEFUN([_LT_COMPILER_BOILERPLATE])])
+m4_ifndef([_LT_LINKER_BOILERPLATE], [AC_DEFUN([_LT_LINKER_BOILERPLATE])])
+m4_ifndef([_AC_PROG_LIBTOOL], [AC_DEFUN([_AC_PROG_LIBTOOL])])
+m4_ifndef([AC_LIBTOOL_SETUP], [AC_DEFUN([AC_LIBTOOL_SETUP])])
+m4_ifndef([_LT_AC_CHECK_DLFCN], [AC_DEFUN([_LT_AC_CHECK_DLFCN])])
+m4_ifndef([AC_LIBTOOL_SYS_DYNAMIC_LINKER], [AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER])])
+m4_ifndef([_LT_AC_TAGCONFIG], [AC_DEFUN([_LT_AC_TAGCONFIG])])
+m4_ifndef([AC_DISABLE_FAST_INSTALL], [AC_DEFUN([AC_DISABLE_FAST_INSTALL])])
+m4_ifndef([_LT_AC_LANG_CXX], [AC_DEFUN([_LT_AC_LANG_CXX])])
+m4_ifndef([_LT_AC_LANG_F77], [AC_DEFUN([_LT_AC_LANG_F77])])
+m4_ifndef([_LT_AC_LANG_GCJ], [AC_DEFUN([_LT_AC_LANG_GCJ])])
+m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])])
+m4_ifndef([_LT_AC_LANG_C_CONFIG], [AC_DEFUN([_LT_AC_LANG_C_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])])
+m4_ifndef([_LT_AC_LANG_CXX_CONFIG], [AC_DEFUN([_LT_AC_LANG_CXX_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_F77_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG])])
+m4_ifndef([_LT_AC_LANG_F77_CONFIG], [AC_DEFUN([_LT_AC_LANG_F77_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_GCJ_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG])])
+m4_ifndef([_LT_AC_LANG_GCJ_CONFIG], [AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])])
+m4_ifndef([_LT_AC_LANG_RC_CONFIG], [AC_DEFUN([_LT_AC_LANG_RC_CONFIG])])
+m4_ifndef([AC_LIBTOOL_CONFIG], [AC_DEFUN([AC_LIBTOOL_CONFIG])])
+m4_ifndef([_LT_AC_FILE_LTDLL_C], [AC_DEFUN([_LT_AC_FILE_LTDLL_C])])
+m4_ifndef([_LT_REQUIRED_DARWIN_CHECKS], [AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS])])
+m4_ifndef([_LT_AC_PROG_CXXCPP], [AC_DEFUN([_LT_AC_PROG_CXXCPP])])
+m4_ifndef([_LT_PREPARE_SED_QUOTE_VARS], [AC_DEFUN([_LT_PREPARE_SED_QUOTE_VARS])])
+m4_ifndef([_LT_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_PROG_ECHO_BACKSLASH])])
+m4_ifndef([_LT_PROG_F77], [AC_DEFUN([_LT_PROG_F77])])
+m4_ifndef([_LT_PROG_FC], [AC_DEFUN([_LT_PROG_FC])])
+m4_ifndef([_LT_PROG_CXX], [AC_DEFUN([_LT_PROG_CXX])])
+
+# Copyright (C) 2002-2012 Free Software Foundation, Inc.
+#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
+# serial 8
+
# AM_AUTOMAKE_VERSION(VERSION)
# ----------------------------
# Automake X.Y traces this macro to ensure aclocal.m4 has been
@@ -6667,10 +8620,10 @@
# generated from the m4 files accompanying Automake X.Y.
# (This private macro should not be called outside this file.)
AC_DEFUN([AM_AUTOMAKE_VERSION],
-[am__api_version='1.10'
+[am__api_version='1.12'
dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
dnl require some minimum version. Point them to the right macro.
-m4_if([$1], [1.10.1], [],
+m4_if([$1], [1.12.2], [],
[AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
])
@@ -6684,24 +8637,26 @@
# AM_SET_CURRENT_AUTOMAKE_VERSION
# -------------------------------
# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
-# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
+# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-[AM_AUTOMAKE_VERSION([1.10.1])dnl
+[AM_AUTOMAKE_VERSION([1.12.2])dnl
m4_ifndef([AC_AUTOCONF_VERSION],
[m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
-_AM_AUTOCONF_VERSION(AC_AUTOCONF_VERSION)])
+_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
# AM_AUX_DIR_EXPAND -*- Autoconf -*-
-# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
+# Copyright (C) 2001-2012 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
+# serial 2
+
# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
-# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to
-# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
+# $ac_aux_dir to '$srcdir/foo'. In other projects, it is set to
+# '$srcdir', '$srcdir/..', or '$srcdir/../..'.
#
# Of course, Automake must honor this variable whenever it calls a
# tool from the auxiliary directory. The problem is that $srcdir (and
@@ -6720,7 +8675,7 @@
#
# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
# are both prefixed by $srcdir. In an in-source build this is usually
-# harmless because $srcdir is `.', but things will broke when you
+# harmless because $srcdir is '.', but things will broke when you
# start a VPATH build or use an absolute $srcdir.
#
# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
@@ -6746,26 +8701,26 @@
# AM_CONDITIONAL -*- Autoconf -*-
-# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006
-# Free Software Foundation, Inc.
+# Copyright (C) 1997-2012 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 8
+# serial 10
# AM_CONDITIONAL(NAME, SHELL-CONDITION)
# -------------------------------------
# Define a conditional.
AC_DEFUN([AM_CONDITIONAL],
-[AC_PREREQ(2.52)dnl
- ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
- [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
+[AC_PREREQ([2.52])dnl
+ m4_if([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
+ [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
AC_SUBST([$1_TRUE])dnl
AC_SUBST([$1_FALSE])dnl
_AM_SUBST_NOTMAKE([$1_TRUE])dnl
_AM_SUBST_NOTMAKE([$1_FALSE])dnl
+m4_define([_AM_COND_VALUE_$1], [$2])dnl
if $2; then
$1_TRUE=
$1_FALSE='#'
@@ -6779,16 +8734,15 @@
Usually this means the macro was only invoked conditionally.]])
fi])])
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
-# Free Software Foundation, Inc.
+# Copyright (C) 1999-2012 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 9
+# serial 17
-# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
+# There are a few dirty hacks below to avoid letting 'AC_PROG_CC' be
# written in clear, in which case automake, when reading aclocal.m4,
# will think it sees a *use*, and therefore will trigger all it's
# C support machinery. Also note that it means that autoscan, seeing
@@ -6798,7 +8752,7 @@
# _AM_DEPENDENCIES(NAME)
# ----------------------
# See how the compiler implements dependency checking.
-# NAME is "CC", "CXX", "GCJ", or "OBJC".
+# NAME is "CC", "CXX", "OBJC", "OBJCXX", "UPC", or "GJC".
# We try a few techniques and use that to set a single cache variable.
#
# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
@@ -6811,12 +8765,13 @@
AC_REQUIRE([AM_MAKE_INCLUDE])dnl
AC_REQUIRE([AM_DEP_TRACK])dnl
-ifelse([$1], CC, [depcc="$CC" am_compiler_list=],
- [$1], CXX, [depcc="$CXX" am_compiler_list=],
- [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
- [$1], UPC, [depcc="$UPC" am_compiler_list=],
- [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
- [depcc="$$1" am_compiler_list=])
+m4_if([$1], [CC], [depcc="$CC" am_compiler_list=],
+ [$1], [CXX], [depcc="$CXX" am_compiler_list=],
+ [$1], [OBJC], [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
+ [$1], [OBJCXX], [depcc="$OBJCXX" am_compiler_list='gcc3 gcc'],
+ [$1], [UPC], [depcc="$UPC" am_compiler_list=],
+ [$1], [GCJ], [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
+ [depcc="$$1" am_compiler_list=])
AC_CACHE_CHECK([dependency style of $depcc],
[am_cv_$1_dependencies_compiler_type],
@@ -6824,8 +8779,9 @@
# We make a subdir and do the tests there. Otherwise we can end up
# making bogus files that we don't know about and never remove. For
# instance it was reported that on HP-UX the gcc test will end up
- # making a dummy file named `D' -- because `-MD' means `put the output
- # in D'.
+ # making a dummy file named 'D' -- because '-MD' means "put the output
+ # in D".
+ rm -rf conftest.dir
mkdir conftest.dir
# Copy depcomp to subdir because otherwise we won't find it if we're
# using a relative directory.
@@ -6843,6 +8799,16 @@
if test "$am_compiler_list" = ""; then
am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
fi
+ am__universal=false
+ m4_case([$1], [CC],
+ [case " $depcc " in #(
+ *\ -arch\ *\ -arch\ *) am__universal=true ;;
+ esac],
+ [CXX],
+ [case " $depcc " in #(
+ *\ -arch\ *\ -arch\ *) am__universal=true ;;
+ esac])
+
for depmode in $am_compiler_list; do
# Setup a source with many dependencies, because some compilers
# like to wrap large dependency lists on column 80 (with \), and
@@ -6854,16 +8820,26 @@
: > sub/conftest.c
for i in 1 2 3 4 5 6; do
echo '#include "conftst'$i'.h"' >> sub/conftest.c
- # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
- # Solaris 8's {/usr,}/bin/sh.
- touch sub/conftst$i.h
+ # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
+ # Solaris 10 /bin/sh.
+ echo '/* dummy */' > sub/conftst$i.h
done
echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+ # We check with '-c' and '-o' for the sake of the "dashmstdout"
+ # mode. It turns out that the SunPro C++ compiler does not properly
+ # handle '-M -o', and we need to detect this. Also, some Intel
+ # versions had trouble with output in subdirs.
+ am__obj=sub/conftest.${OBJEXT-o}
+ am__minus_obj="-o $am__obj"
case $depmode in
+ gcc)
+ # This depmode causes a compiler race in universal mode.
+ test "$am__universal" = false || continue
+ ;;
nosideeffect)
- # after this tag, mechanisms are not by side-effect, so they'll
- # only be used when explicitly requested
+ # After this tag, mechanisms are not by side-effect, so they'll
+ # only be used when explicitly requested.
if test "x$enable_dependency_tracking" = xyes; then
continue
else
@@ -6870,19 +8846,23 @@
break
fi
;;
+ msvc7 | msvc7msys | msvisualcpp | msvcmsys)
+ # This compiler won't grok '-c -o', but also, the minuso test has
+ # not run yet. These depmodes are late enough in the game, and
+ # so weak that their functioning should not be impacted.
+ am__obj=conftest.${OBJEXT-o}
+ am__minus_obj=
+ ;;
none) break ;;
esac
- # We check with `-c' and `-o' for the sake of the "dashmstdout"
- # mode. It turns out that the SunPro C++ compiler does not properly
- # handle `-M -o', and we need to detect this.
if depmode=$depmode \
- source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
+ source=sub/conftest.c object=$am__obj \
depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
- $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
+ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
>/dev/null 2>conftest.err &&
grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
- grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
+ grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
${MAKE-make} -s -f confmf > /dev/null 2>&1; then
# icc doesn't choke on unknown options, it will just issue warnings
# or remarks (even with -Werror). So we grep stderr for any message
@@ -6915,7 +8895,7 @@
# AM_SET_DEPDIR
# -------------
# Choose a directory name for dependency files.
-# This macro is AC_REQUIREd in _AM_DEPENDENCIES
+# This macro is AC_REQUIREd in _AM_DEPENDENCIES.
AC_DEFUN([AM_SET_DEPDIR],
[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
@@ -6925,71 +8905,86 @@
# AM_DEP_TRACK
# ------------
AC_DEFUN([AM_DEP_TRACK],
-[AC_ARG_ENABLE(dependency-tracking,
-[ --disable-dependency-tracking speeds up one-time build
- --enable-dependency-tracking do not reject slow dependency extractors])
+[AC_ARG_ENABLE([dependency-tracking], [dnl
+AS_HELP_STRING(
+ [--enable-dependency-tracking],
+ [do not reject slow dependency extractors])
+AS_HELP_STRING(
+ [--disable-dependency-tracking],
+ [speeds up one-time build])])
if test "x$enable_dependency_tracking" != xno; then
am_depcomp="$ac_aux_dir/depcomp"
AMDEPBACKSLASH='\'
+ am__nodep='_no'
fi
AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
AC_SUBST([AMDEPBACKSLASH])dnl
_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
+AC_SUBST([am__nodep])dnl
+_AM_SUBST_NOTMAKE([am__nodep])dnl
])
# Generate code to set up dependency tracking. -*- Autoconf -*-
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005
-# Free Software Foundation, Inc.
+# Copyright (C) 1999-2012 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-#serial 3
+# serial 6
# _AM_OUTPUT_DEPENDENCY_COMMANDS
# ------------------------------
AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
-[for mf in $CONFIG_FILES; do
- # Strip MF so we end up with the name of the file.
- mf=`echo "$mf" | sed -e 's/:.*$//'`
- # Check whether this is an Automake generated Makefile or not.
- # We used to match only the files named `Makefile.in', but
- # some people rename them; so instead we look at the file content.
- # Grep'ing the first line is not enough: some people post-process
- # each Makefile.in and add a new line on top of each file to say so.
- # Grep'ing the whole file is not good either: AIX grep has a line
- # limit of 2048, but all sed's we know have understand at least 4000.
- if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
- dirpart=`AS_DIRNAME("$mf")`
- else
- continue
- fi
- # Extract the definition of DEPDIR, am__include, and am__quote
- # from the Makefile without running `make'.
- DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
- test -z "$DEPDIR" && continue
- am__include=`sed -n 's/^am__include = //p' < "$mf"`
- test -z "am__include" && continue
- am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
- # When using ansi2knr, U may be empty or an underscore; expand it
- U=`sed -n 's/^U = //p' < "$mf"`
- # Find all dependency output files, they are included files with
- # $(DEPDIR) in their names. We invoke sed twice because it is the
- # simplest approach to changing $(DEPDIR) to its actual value in the
- # expansion.
- for file in `sed -n "
- s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
- sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
- # Make sure the directory exists.
- test -f "$dirpart/$file" && continue
- fdir=`AS_DIRNAME(["$file"])`
- AS_MKDIR_P([$dirpart/$fdir])
- # echo "creating $dirpart/$file"
- echo '# dummy' > "$dirpart/$file"
+[{
+ # Autoconf 2.62 quotes --file arguments for eval, but not when files
+ # are listed without --file. Let's play safe and only enable the eval
+ # if we detect the quoting.
+ case $CONFIG_FILES in
+ *\'*) eval set x "$CONFIG_FILES" ;;
+ *) set x $CONFIG_FILES ;;
+ esac
+ shift
+ for mf
+ do
+ # Strip MF so we end up with the name of the file.
+ mf=`echo "$mf" | sed -e 's/:.*$//'`
+ # Check whether this is an Automake generated Makefile or not.
+ # We used to match only the files named 'Makefile.in', but
+ # some people rename them; so instead we look at the file content.
+ # Grep'ing the first line is not enough: some people post-process
+ # each Makefile.in and add a new line on top of each file to say so.
+ # Grep'ing the whole file is not good either: AIX grep has a line
+ # limit of 2048, but all sed's we know have understand at least 4000.
+ if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+ dirpart=`AS_DIRNAME("$mf")`
+ else
+ continue
+ fi
+ # Extract the definition of DEPDIR, am__include, and am__quote
+ # from the Makefile without running 'make'.
+ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+ test -z "$DEPDIR" && continue
+ am__include=`sed -n 's/^am__include = //p' < "$mf"`
+ test -z "am__include" && continue
+ am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+ # Find all dependency output files, they are included files with
+ # $(DEPDIR) in their names. We invoke sed twice because it is the
+ # simplest approach to changing $(DEPDIR) to its actual value in the
+ # expansion.
+ for file in `sed -n "
+ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do
+ # Make sure the directory exists.
+ test -f "$dirpart/$file" && continue
+ fdir=`AS_DIRNAME(["$file"])`
+ AS_MKDIR_P([$dirpart/$fdir])
+ # echo "creating $dirpart/$file"
+ echo '# dummy' > "$dirpart/$file"
+ done
done
-done
+}
])# _AM_OUTPUT_DEPENDENCY_COMMANDS
@@ -6998,7 +8993,7 @@
# This macro should only be invoked once -- use via AC_REQUIRE.
#
# This code is only required when automatic dependency tracking
-# is enabled. FIXME. This creates each `.P' file that we will
+# is enabled. FIXME. This creates each '.P' file that we will
# need in order to bootstrap the dependency handling code.
AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
[AC_CONFIG_COMMANDS([depfiles],
@@ -7008,14 +9003,13 @@
# Do all the work for Automake. -*- Autoconf -*-
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005, 2006, 2008 Free Software Foundation, Inc.
+# Copyright (C) 1996-2012 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 13
+# serial 19
# This macro actually does too much. Some checks are only needed if
# your package does certain things. But this isn't really a big deal.
@@ -7032,7 +9026,7 @@
# arguments mandatory, and then we can depend on a new Autoconf
# release and drop the old call support.
AC_DEFUN([AM_INIT_AUTOMAKE],
-[AC_PREREQ([2.60])dnl
+[AC_PREREQ([2.62])dnl
dnl Autoconf wants to disallow AM_ names. We explicitly allow
dnl the ones we care about.
m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
@@ -7061,31 +9055,41 @@
# Define the identity of the package.
dnl Distinguish between old-style and new-style calls.
m4_ifval([$2],
-[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
+[AC_DIAGNOSE([obsolete],
+[$0: two- and three-arguments forms are deprecated. For more info, see:
+http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_INIT_AUTOMAKE-invocation])
+m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
AC_SUBST([PACKAGE], [$1])dnl
AC_SUBST([VERSION], [$2])],
[_AM_SET_OPTIONS([$1])dnl
dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
-m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,,
+m4_if(
+ m4_ifdef([AC_PACKAGE_NAME], [ok]):m4_ifdef([AC_PACKAGE_VERSION], [ok]),
+ [ok:ok],,
[m4_fatal([AC_INIT should be called with package and version arguments])])dnl
AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
_AM_IF_OPTION([no-define],,
-[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
- AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
+[AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package])
+ AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl
# Some tools Automake needs.
AC_REQUIRE([AM_SANITY_CHECK])dnl
AC_REQUIRE([AC_ARG_PROGRAM])dnl
-AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
-AM_MISSING_PROG(AUTOCONF, autoconf)
-AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
-AM_MISSING_PROG(AUTOHEADER, autoheader)
-AM_MISSING_PROG(MAKEINFO, makeinfo)
-AM_PROG_INSTALL_SH
-AM_PROG_INSTALL_STRIP
-AC_REQUIRE([AM_PROG_MKDIR_P])dnl
+AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}])
+AM_MISSING_PROG([AUTOCONF], [autoconf])
+AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}])
+AM_MISSING_PROG([AUTOHEADER], [autoheader])
+AM_MISSING_PROG([MAKEINFO], [makeinfo])
+AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
+AC_REQUIRE([AC_PROG_MKDIR_P])dnl
+# For better backward compatibility. To be removed once Automake 1.9.x
+# dies out for good. For more background, see:
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
+AC_SUBST([mkdir_p], ['$(MKDIR_P)'])
# We need awk for the "check" target. The system "awk" is bad on
# some platforms.
AC_REQUIRE([AC_PROG_AWK])dnl
@@ -7092,25 +9096,45 @@
AC_REQUIRE([AC_PROG_MAKE_SET])dnl
AC_REQUIRE([AM_SET_LEADING_DOT])dnl
_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
- [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
- [_AM_PROG_TAR([v7])])])
+ [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
+ [_AM_PROG_TAR([v7])])])
_AM_IF_OPTION([no-dependencies],,
[AC_PROVIDE_IFELSE([AC_PROG_CC],
- [_AM_DEPENDENCIES(CC)],
- [define([AC_PROG_CC],
- defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
+ [_AM_DEPENDENCIES([CC])],
+ [m4_define([AC_PROG_CC],
+ m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl
AC_PROVIDE_IFELSE([AC_PROG_CXX],
- [_AM_DEPENDENCIES(CXX)],
- [define([AC_PROG_CXX],
- defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
+ [_AM_DEPENDENCIES([CXX])],
+ [m4_define([AC_PROG_CXX],
+ m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl
AC_PROVIDE_IFELSE([AC_PROG_OBJC],
- [_AM_DEPENDENCIES(OBJC)],
- [define([AC_PROG_OBJC],
- defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
+ [_AM_DEPENDENCIES([OBJC])],
+ [m4_define([AC_PROG_OBJC],
+ m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl
+dnl Support for Objective C++ was only introduced in Autoconf 2.65,
+dnl but we still cater to Autoconf 2.62.
+m4_ifdef([AC_PROG_OBJCXX],
+[AC_PROVIDE_IFELSE([AC_PROG_OBJCXX],
+ [_AM_DEPENDENCIES([OBJCXX])],
+ [m4_define([AC_PROG_OBJCXX],
+ m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])])dnl
])
+_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl
+dnl The 'parallel-tests' driver may need to know about EXEEXT, so add the
+dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This macro
+dnl is hooked onto _AC_COMPILER_EXEEXT early, see below.
+AC_CONFIG_COMMANDS_PRE(dnl
+[m4_provide_if([_AM_COMPILER_EXEEXT],
+ [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
])
+dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion. Do not
+dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
+dnl mangled by Autoconf and run in a shell conditional statement.
+m4_define([_AC_COMPILER_EXEEXT],
+m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
+
# When config.status generates a header, we must update the stamp-h file.
# This file resides in the same directory as the config header
# that is generated. The stamp files are numbered to have different names.
@@ -7132,21 +9156,30 @@
done
echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
-# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
+# Copyright (C) 2001-2012 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
+# serial 8
+
# AM_PROG_INSTALL_SH
# ------------------
# Define $install_sh.
AC_DEFUN([AM_PROG_INSTALL_SH],
[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"}
-AC_SUBST(install_sh)])
+if test x"${install_sh}" != xset; then
+ case $am_aux_dir in
+ *\ * | *\ *)
+ install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+ *)
+ install_sh="\${SHELL} $am_aux_dir/install-sh"
+ esac
+fi
+AC_SUBST([install_sh])])
-# Copyright (C) 2003, 2005 Free Software Foundation, Inc.
+# Copyright (C) 2003-2012 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -7170,27 +9203,38 @@
# Add --enable-maintainer-mode option to configure. -*- Autoconf -*-
# From Jim Meyering
-# Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004, 2005
-# Free Software Foundation, Inc.
+# Copyright (C) 1996-2012 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 4
+# serial 7
+# AM_MAINTAINER_MODE([DEFAULT-MODE])
+# ----------------------------------
+# Control maintainer-specific portions of Makefiles.
+# Default is to disable them, unless 'enable' is passed literally.
+# For symmetry, 'disable' may be passed as well. Anyway, the user
+# can override the default with the --enable/--disable switch.
AC_DEFUN([AM_MAINTAINER_MODE],
-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
- dnl maintainer-mode is disabled by default
- AC_ARG_ENABLE(maintainer-mode,
-[ --enable-maintainer-mode enable make rules and dependencies not useful
- (and sometimes confusing) to the casual installer],
- USE_MAINTAINER_MODE=$enableval,
- USE_MAINTAINER_MODE=no)
+[m4_case(m4_default([$1], [disable]),
+ [enable], [m4_define([am_maintainer_other], [disable])],
+ [disable], [m4_define([am_maintainer_other], [enable])],
+ [m4_define([am_maintainer_other], [enable])
+ m4_warn([syntax], [unexpected argument to AM@&t at _MAINTAINER_MODE: $1])])
+AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
+ dnl maintainer-mode's default is 'disable' unless 'enable' is passed
+ AC_ARG_ENABLE([maintainer-mode],
+ [AS_HELP_STRING([--]am_maintainer_other[-maintainer-mode],
+ am_maintainer_other[ make rules and dependencies not useful
+ (and sometimes confusing) to the casual installer])],
+ [USE_MAINTAINER_MODE=$enableval],
+ [USE_MAINTAINER_MODE=]m4_if(am_maintainer_other, [enable], [no], [yes]))
AC_MSG_RESULT([$USE_MAINTAINER_MODE])
- AM_CONDITIONAL(MAINTAINER_MODE, [test $USE_MAINTAINER_MODE = yes])
+ AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes])
MAINT=$MAINTAINER_MODE_TRUE
- AC_SUBST(MAINT)dnl
+ AC_SUBST([MAINT])dnl
]
)
@@ -7198,13 +9242,13 @@
# Check to see how 'make' treats includes. -*- Autoconf -*-
-# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc.
+# Copyright (C) 2001-2012 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 3
+# serial 5
# AM_MAKE_INCLUDE()
# -----------------
@@ -7213,7 +9257,7 @@
[am_make=${MAKE-make}
cat > confinc << 'END'
am__doit:
- @echo done
+ @echo this is the am__doit target
.PHONY: am__doit
END
# If we don't find an include directive, just comment out the code.
@@ -7223,24 +9267,24 @@
_am_result=none
# First try GNU make style include.
echo "include confinc" > confmf
-# We grep out `Entering directory' and `Leaving directory'
-# messages which can occur if `w' ends up in MAKEFLAGS.
-# In particular we don't look at `^make:' because GNU make might
-# be invoked under some other name (usually "gmake"), in which
-# case it prints its new name instead of `make'.
-if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
- am__include=include
- am__quote=
- _am_result=GNU
-fi
+# Ignore all kinds of additional output from 'make'.
+case `$am_make -s -f confmf 2> /dev/null` in #(
+*the\ am__doit\ target*)
+ am__include=include
+ am__quote=
+ _am_result=GNU
+ ;;
+esac
# Now try BSD make style include.
if test "$am__include" = "#"; then
echo '.include "confinc"' > confmf
- if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
- am__include=.include
- am__quote="\""
- _am_result=BSD
- fi
+ case `$am_make -s -f confmf 2> /dev/null` in #(
+ *the\ am__doit\ target*)
+ am__include=.include
+ am__quote="\""
+ _am_result=BSD
+ ;;
+ esac
fi
AC_SUBST([am__include])
AC_SUBST([am__quote])
@@ -7250,14 +9294,13 @@
# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*-
-# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005
-# Free Software Foundation, Inc.
+# Copyright (C) 1997-2012 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 5
+# serial 7
# AM_MISSING_PROG(NAME, PROGRAM)
# ------------------------------
@@ -7274,51 +9317,32 @@
AC_DEFUN([AM_MISSING_HAS_RUN],
[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
AC_REQUIRE_AUX_FILE([missing])dnl
-test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
+if test x"${MISSING+set}" != xset; then
+ case $am_aux_dir in
+ *\ * | *\ *)
+ MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+ *)
+ MISSING="\${SHELL} $am_aux_dir/missing" ;;
+ esac
+fi
# Use eval to expand $SHELL
if eval "$MISSING --run true"; then
am_missing_run="$MISSING --run "
else
am_missing_run=
- AC_MSG_WARN([`missing' script is too old or missing])
+ AC_MSG_WARN(['missing' script is too old or missing])
fi
])
-# Copyright (C) 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_PROG_MKDIR_P
-# ---------------
-# Check for `mkdir -p'.
-AC_DEFUN([AM_PROG_MKDIR_P],
-[AC_PREREQ([2.60])dnl
-AC_REQUIRE([AC_PROG_MKDIR_P])dnl
-dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P,
-dnl while keeping a definition of mkdir_p for backward compatibility.
-dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile.
-dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of
-dnl Makefile.ins that do not define MKDIR_P, so we do our own
-dnl adjustment using top_builddir (which is defined more often than
-dnl MKDIR_P).
-AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl
-case $mkdir_p in
- [[\\/$]]* | ?:[[\\/]]*) ;;
- */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
-esac
-])
-
# Helper functions for option handling. -*- Autoconf -*-
-# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc.
+# Copyright (C) 2001-2012 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 3
+# serial 6
# _AM_MANGLE_OPTION(NAME)
# -----------------------
@@ -7326,16 +9350,16 @@
[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
# _AM_SET_OPTION(NAME)
-# ------------------------------
+# --------------------
# Set option NAME. Presently that only means defining a flag for this option.
AC_DEFUN([_AM_SET_OPTION],
-[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
+[m4_define(_AM_MANGLE_OPTION([$1]), [1])])
# _AM_SET_OPTIONS(OPTIONS)
-# ----------------------------------
+# ------------------------
# OPTIONS is a space-separated list of Automake options.
AC_DEFUN([_AM_SET_OPTIONS],
-[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
+[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
# -------------------------------------------
@@ -7345,45 +9369,62 @@
# Check to make sure that the build environment is sane. -*- Autoconf -*-
-# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005
-# Free Software Foundation, Inc.
+# Copyright (C) 1996-2012 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 4
+# serial 9
# AM_SANITY_CHECK
# ---------------
AC_DEFUN([AM_SANITY_CHECK],
[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftest.file
-# Do `set' in a subshell so we don't clobber the current shell's
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name. Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+ *[[\\\"\#\$\&\'\`$am_lf]]*)
+ AC_MSG_ERROR([unsafe absolute working directory name]);;
+esac
+case $srcdir in
+ *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*)
+ AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);;
+esac
+
+# Do 'set' in a subshell so we don't clobber the current shell's
# arguments. Must try -L first in case configure is actually a
# symlink; some systems play weird games with the mod time of symlinks
# (eg FreeBSD returns the mod time of the symlink's containing
# directory).
if (
- set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
- if test "$[*]" = "X"; then
- # -L didn't work.
- set X `ls -t $srcdir/configure conftest.file`
- fi
- rm -f conftest.file
- if test "$[*]" != "X $srcdir/configure conftest.file" \
- && test "$[*]" != "X conftest.file $srcdir/configure"; then
+ am_has_slept=no
+ for am_try in 1 2; do
+ echo "timestamp, slept: $am_has_slept" > conftest.file
+ set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+ if test "$[*]" = "X"; then
+ # -L didn't work.
+ set X `ls -t "$srcdir/configure" conftest.file`
+ fi
+ if test "$[*]" != "X $srcdir/configure conftest.file" \
+ && test "$[*]" != "X conftest.file $srcdir/configure"; then
- # If neither matched, then we have a broken ls. This can happen
- # if, for instance, CONFIG_SHELL is bash and it inherits a
- # broken ls alias from the environment. This has actually
- # happened. Such a system could not be considered "sane".
- AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
-alias in your environment])
- fi
-
+ # If neither matched, then we have a broken ls. This can happen
+ # if, for instance, CONFIG_SHELL is bash and it inherits a
+ # broken ls alias from the environment. This has actually
+ # happened. Such a system could not be considered "sane".
+ AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
+ alias in your environment])
+ fi
+ if test "$[2]" = conftest.file || test $am_try -eq 2; then
+ break
+ fi
+ # Just in case.
+ sleep 1
+ am_has_slept=yes
+ done
test "$[2]" = conftest.file
)
then
@@ -7393,30 +9434,48 @@
AC_MSG_ERROR([newly created file is older than distributed files!
Check your system clock])
fi
-AC_MSG_RESULT(yes)])
+AC_MSG_RESULT([yes])
+# If we didn't sleep, we still need to ensure time stamps of config.status and
+# generated files are strictly newer.
+am_sleep_pid=
+if grep 'slept: no' conftest.file >/dev/null 2>&1; then
+ ( sleep 1 ) &
+ am_sleep_pid=$!
+fi
+AC_CONFIG_COMMANDS_PRE(
+ [AC_MSG_CHECKING([that generated files are newer than configure])
+ if test -n "$am_sleep_pid"; then
+ # Hide warnings about reused PIDs.
+ wait $am_sleep_pid 2>/dev/null
+ fi
+ AC_MSG_RESULT([done])])
+rm -f conftest.file
+])
-# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
+# Copyright (C) 2001-2012 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
+# serial 2
+
# AM_PROG_INSTALL_STRIP
# ---------------------
-# One issue with vendor `install' (even GNU) is that you can't
+# One issue with vendor 'install' (even GNU) is that you can't
# specify the program used to strip binaries. This is especially
# annoying in cross-compiling environments, where the build's strip
# is unlikely to handle the host's binaries.
# Fortunately install-sh will honor a STRIPPROG variable, so we
-# always use install-sh in `make install-strip', and initialize
+# always use install-sh in "make install-strip", and initialize
# STRIPPROG with the value of the STRIP variable (set by the user).
AC_DEFUN([AM_PROG_INSTALL_STRIP],
[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
-# Installed binaries are usually stripped using `strip' when the user
-# run `make install-strip'. However `strip' might not be the right
+# Installed binaries are usually stripped using 'strip' when the user
+# run "make install-strip". However 'strip' might not be the right
# tool to use in cross-compilation environments, therefore Automake
-# will honor the `STRIP' environment variable to overrule this program.
-dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
+# will honor the 'STRIP' environment variable to overrule this program.
+dnl Don't test for $cross_compiling = yes, because it might be 'maybe'.
if test "$cross_compiling" != no; then
AC_CHECK_TOOL([STRIP], [strip], :)
fi
@@ -7423,12 +9482,14 @@
INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
AC_SUBST([INSTALL_STRIP_PROGRAM])])
-# Copyright (C) 2006 Free Software Foundation, Inc.
+# Copyright (C) 2006-2012 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
+# serial 3
+
# _AM_SUBST_NOTMAKE(VARIABLE)
# ---------------------------
# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
@@ -7435,20 +9496,25 @@
# This macro is traced by Automake.
AC_DEFUN([_AM_SUBST_NOTMAKE])
+# AM_SUBST_NOTMAKE(VARIABLE)
+# --------------------------
+# Public sister of _AM_SUBST_NOTMAKE.
+AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
+
# Check how to create a tarball. -*- Autoconf -*-
-# Copyright (C) 2004, 2005 Free Software Foundation, Inc.
+# Copyright (C) 2004-2012 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 2
+# serial 3
# _AM_PROG_TAR(FORMAT)
# --------------------
# Check how to create a tarball in format FORMAT.
-# FORMAT should be one of `v7', `ustar', or `pax'.
+# FORMAT should be one of 'v7', 'ustar', or 'pax'.
#
# Substitute a variable $(am__tar) that is a command
# writing to stdout a FORMAT-tarball containing the directory
@@ -7459,10 +9525,11 @@
# a tarball read from stdin.
# $(am__untar) < result.tar
AC_DEFUN([_AM_PROG_TAR],
-[# Always define AMTAR for backward compatibility.
-AM_MISSING_PROG([AMTAR], [tar])
+[# Always define AMTAR for backward compatibility. Yes, it's still used
+# in the wild :-( We should find a proper way to deprecate it ...
+AC_SUBST([AMTAR], ['$${TAR-tar}'])
m4_if([$1], [v7],
- [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],
+ [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'],
[m4_case([$1], [ustar],, [pax],,
[m4_fatal([Unknown tar format])])
AC_MSG_CHECKING([how to create a $1 tar archive])
@@ -7470,7 +9537,7 @@
_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
_am_tools=${am_cv_prog_tar_$1-$_am_tools}
# Do not fold the above two line into one, because Tru64 sh and
-# Solaris sh will not grok spaces in the rhs of `-'.
+# Solaris sh will not grok spaces in the rhs of '-'.
for _am_tool in $_am_tools
do
case $_am_tool in
Modified: trunk/contrib/openbsm/autogen.sh
===================================================================
--- trunk/contrib/openbsm/autogen.sh 2016-09-18 22:43:06 UTC (rev 8504)
+++ trunk/contrib/openbsm/autogen.sh 2016-09-18 22:45:22 UTC (rev 8505)
@@ -1,6 +1,6 @@
#!/bin/sh
#
-# $P4: //depot/projects/trustedbsd/openbsm/autogen.sh#1 $
+# $P4: //depot/projects/trustedbsd/openbsm/autogen.sh#2 $
#
libtoolize --copy --force
Modified: trunk/contrib/openbsm/bin/Makefile.am
===================================================================
--- trunk/contrib/openbsm/bin/Makefile.am 2016-09-18 22:43:06 UTC (rev 8504)
+++ trunk/contrib/openbsm/bin/Makefile.am 2016-09-18 22:45:22 UTC (rev 8505)
@@ -1,8 +1,9 @@
-#
-# $P4: //depot/projects/trustedbsd/openbsm/bin/Makefile.am#3 $
-#
+##
+## $P4: //depot/projects/trustedbsd/openbsm/bin/Makefile.am#4 $
+##
SUBDIRS = \
+ auditdistd \
auditfilterd \
auditreduce \
praudit
Modified: trunk/contrib/openbsm/bin/Makefile.in
===================================================================
--- trunk/contrib/openbsm/bin/Makefile.in 2016-09-18 22:43:06 UTC (rev 8504)
+++ trunk/contrib/openbsm/bin/Makefile.in 2016-09-18 22:45:22 UTC (rev 8505)
@@ -1,8 +1,8 @@
-# Makefile.in generated by automake 1.10.1 from Makefile.am.
+# Makefile.in generated by automake 1.12.2 from Makefile.am.
# @configure_input@
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+# Copyright (C) 1994-2012 Free Software Foundation, Inc.
+
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@@ -13,14 +13,28 @@
# PARTICULAR PURPOSE.
@SET_MAKE@
-
-#
-# $P4: //depot/projects/trustedbsd/openbsm/bin/Makefile.in#11 $
-#
VPATH = @srcdir@
+am__make_dryrun = \
+ { \
+ am__dry=no; \
+ case $$MAKEFLAGS in \
+ *\\[\ \ ]*) \
+ echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
+ | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+ *) \
+ for am__flg in $$MAKEFLAGS; do \
+ case $$am__flg in \
+ *=*|--*) ;; \
+ *n*) am__dry=yes; break;; \
+ esac; \
+ done;; \
+ esac; \
+ test $$am__dry = yes; \
+ }
pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
@@ -48,6 +62,7 @@
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/config/config.h
CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
@@ -57,12 +72,46 @@
install-pdf-recursive install-ps-recursive install-recursive \
installcheck-recursive installdirs-recursive pdf-recursive \
ps-recursive uninstall-recursive
+am__can_run_installinfo = \
+ case $$AM_UPDATE_INFO_DIR in \
+ n|no|NO) false;; \
+ *) (install-info --version) >/dev/null 2>&1;; \
+ esac
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive
+AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
+ $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
+ distdir
ETAGS = etags
CTAGS = ctags
-DIST_SUBDIRS = auditfilterd auditreduce praudit audit auditd
+DIST_SUBDIRS = auditdistd auditfilterd auditreduce praudit audit \
+ auditd
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+am__relativize = \
+ dir0=`pwd`; \
+ sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+ sed_rest='s,^[^/]*/*,,'; \
+ sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+ sed_butlast='s,/*[^/]*$$,,'; \
+ while test -n "$$dir1"; do \
+ first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+ if test "$$first" != "."; then \
+ if test "$$first" = ".."; then \
+ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+ else \
+ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+ if test "$$first2" = "$$first"; then \
+ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+ else \
+ dir2="../$$dir2"; \
+ fi; \
+ dir0="$$dir0"/"$$first"; \
+ fi; \
+ fi; \
+ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+ done; \
+ reldir="$$dir2"
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AR = @AR@
@@ -75,22 +124,18 @@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
DSYMUTIL = @DSYMUTIL@
-ECHO = @ECHO@
+DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
-F77 = @F77@
-FFLAGS = @FFLAGS@
+FGREP = @FGREP@
GREP = @GREP@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
@@ -97,23 +142,34 @@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
LDFLAGS = @LDFLAGS@
+LEX = @LEX@
+LEXLIB = @LEXLIB@
+LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
MIG = @MIG@
MKDIR_P = @MKDIR_P@
+NM = @NM@
NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
RANLIB = @RANLIB@
@@ -122,13 +178,15 @@
SHELL = @SHELL@
STRIP = @STRIP@
VERSION = @VERSION@
+YACC = @YACC@
+YFLAGS = @YFLAGS@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
@@ -174,7 +232,7 @@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
-SUBDIRS = auditfilterd auditreduce praudit $(am__append_1)
+SUBDIRS = auditdistd auditfilterd auditreduce praudit $(am__append_1)
all: all-recursive
.SUFFIXES:
@@ -182,14 +240,14 @@
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
- && exit 0; \
+ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+ && { if test -f $@; then exit 0; else break; fi; }; \
exit 1;; \
esac; \
done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign bin/Makefile'; \
- cd $(top_srcdir) && \
- $(AUTOMAKE) --foreign bin/Makefile
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign bin/Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --foreign bin/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
@@ -207,6 +265,7 @@
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
mostlyclean-libtool:
-rm -f *.lo
@@ -215,13 +274,13 @@
-rm -rf .libs _libs
# This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-# (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
-$(RECURSIVE_TARGETS):
- @failcom='exit 1'; \
+# into them and run 'make' without going through this Makefile.
+# To change the values of 'make' variables: instead of editing Makefiles,
+# (1) if the variable is set in 'config.status', edit 'config.status'
+# (which will cause the Makefiles to be regenerated when you run 'make');
+# (2) otherwise, pass the desired values on the 'make' command line.
+$(RECURSIVE_TARGETS) $(RECURSIVE_CLEAN_TARGETS):
+ @fail= failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
@@ -230,7 +289,11 @@
done; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
@@ -238,51 +301,24 @@
else \
local_target="$$target"; \
fi; \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
-
-$(RECURSIVE_CLEAN_TARGETS):
- @failcom='exit 1'; \
- for f in x $$MAKEFLAGS; do \
- case $$f in \
- *=* | --[!k]*);; \
- *k*) failcom='fail=yes';; \
- esac; \
- done; \
- dot_seen=no; \
- case "$@" in \
- distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
- *) list='$(SUBDIRS)' ;; \
- esac; \
- rev=''; for subdir in $$list; do \
- if test "$$subdir" = "."; then :; else \
- rev="$$subdir $$rev"; \
- fi; \
- done; \
- rev="$$rev ."; \
- target=`echo $@ | sed s/-recursive//`; \
- for subdir in $$rev; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || eval $$failcom; \
- done && test -z "$$fail"
tags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
done
ctags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
done
+cscopelist-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) cscopelist); \
+ done
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
@@ -289,7 +325,7 @@
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
- $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
mkid -fID $$unique
tags: TAGS
@@ -296,7 +332,7 @@
TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
- tags=; \
+ set x; \
here=`pwd`; \
if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
include_option=--etags-include; \
@@ -308,7 +344,7 @@
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test ! -f $$subdir/TAGS || \
- tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
fi; \
done; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
@@ -317,15 +353,20 @@
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ shift; \
+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$tags $$unique; \
+ if test $$# -gt 0; then \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ "$$@" $$unique; \
+ else \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$unique; \
+ fi; \
fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
- tags=; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
@@ -332,15 +373,29 @@
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
- test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$tags $$unique
+ $$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
- && cd $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) $$here
+ && $(am__cd) $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: cscopelist-recursive $(HEADERS) $(SOURCES) $(LISP)
+ list='$(SOURCES) $(HEADERS) $(LISP)'; \
+ case "$(srcdir)" in \
+ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+ *) sdir=$(subdir)/$(srcdir) ;; \
+ esac; \
+ for i in $$list; do \
+ if test -f "$$i"; then \
+ echo "$(subdir)/$$i"; \
+ else \
+ echo "$$sdir/$$i"; \
+ fi; \
+ done >> $(top_builddir)/cscope.files
+
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -360,29 +415,41 @@
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
- list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
- test -d "$(distdir)/$$subdir" \
- || $(MKDIR_P) "$(distdir)/$$subdir" \
- || exit 1; \
- distdir=`$(am__cd) $(distdir) && pwd`; \
- top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
- (cd $$subdir && \
+ $(am__make_dryrun) \
+ || test -d "$(distdir)/$$subdir" \
+ || $(MKDIR_P) "$(distdir)/$$subdir" \
+ || exit 1; \
+ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+ $(am__relativize); \
+ new_distdir=$$reldir; \
+ dir1=$$subdir; dir2="$(top_distdir)"; \
+ $(am__relativize); \
+ new_top_distdir=$$reldir; \
+ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+ ($(am__cd) $$subdir && \
$(MAKE) $(AM_MAKEFLAGS) \
- top_distdir="$$top_distdir" \
- distdir="$$distdir/$$subdir" \
+ top_distdir="$$new_top_distdir" \
+ distdir="$$new_distdir" \
am__remove_distdir=: \
am__skip_length_check=: \
+ am__skip_mode_fix=: \
distdir) \
|| exit 1; \
fi; \
@@ -402,10 +469,15 @@
installcheck: installcheck-recursive
install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+ if test -z '$(STRIP)'; then \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ install; \
+ else \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+ fi
mostlyclean-generic:
clean-generic:
@@ -412,6 +484,7 @@
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@@ -430,6 +503,8 @@
html: html-recursive
+html-am:
+
info: info-recursive
info-am:
@@ -438,18 +513,28 @@
install-dvi: install-dvi-recursive
+install-dvi-am:
+
install-exec-am:
install-html: install-html-recursive
+install-html-am:
+
install-info: install-info-recursive
+install-info-am:
+
install-man:
install-pdf: install-pdf-recursive
+install-pdf-am:
+
install-ps: install-ps-recursive
+install-ps-am:
+
installcheck-am:
maintainer-clean: maintainer-clean-recursive
@@ -470,23 +555,25 @@
uninstall-am:
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
- install-strip
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) \
+ cscopelist-recursive ctags-recursive install-am install-strip \
+ tags-recursive
.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
all all-am check check-am clean clean-generic clean-libtool \
- ctags ctags-recursive distclean distclean-generic \
- distclean-libtool distclean-tags distdir dvi dvi-am html \
- html-am info info-am install install-am install-data \
- install-data-am install-dvi install-dvi-am install-exec \
- install-exec-am install-html install-html-am install-info \
- install-info-am install-man install-pdf install-pdf-am \
- install-ps install-ps-am install-strip installcheck \
- installcheck-am installdirs installdirs-am maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic \
- mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
- uninstall uninstall-am
+ cscopelist cscopelist-recursive ctags ctags-recursive \
+ distclean distclean-generic distclean-libtool distclean-tags \
+ distdir dvi dvi-am html html-am info info-am install \
+ install-am install-data install-data-am install-dvi \
+ install-dvi-am install-exec install-exec-am install-html \
+ install-html-am install-info install-info-am install-man \
+ install-pdf install-pdf-am install-ps install-ps-am \
+ install-strip installcheck installcheck-am installdirs \
+ installdirs-am maintainer-clean maintainer-clean-generic \
+ mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
+ ps ps-am tags tags-recursive uninstall uninstall-am
+
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
Modified: trunk/contrib/openbsm/bin/audit/Makefile.am
===================================================================
--- trunk/contrib/openbsm/bin/audit/Makefile.am 2016-09-18 22:43:06 UTC (rev 8504)
+++ trunk/contrib/openbsm/bin/audit/Makefile.am 2016-09-18 22:45:22 UTC (rev 8505)
@@ -1,6 +1,6 @@
-#
-# $P4: //depot/projects/trustedbsd/openbsm/bin/audit/Makefile.am#6 $
-#
+##
+## $P4: //depot/projects/trustedbsd/openbsm/bin/audit/Makefile.am#7 $
+##
if USE_NATIVE_INCLUDES
INCLUDES = -I$(top_builddir) -I$(top_srcdir)
Modified: trunk/contrib/openbsm/bin/audit/Makefile.in
===================================================================
--- trunk/contrib/openbsm/bin/audit/Makefile.in 2016-09-18 22:43:06 UTC (rev 8504)
+++ trunk/contrib/openbsm/bin/audit/Makefile.in 2016-09-18 22:45:22 UTC (rev 8505)
@@ -1,8 +1,8 @@
-# Makefile.in generated by automake 1.10.1 from Makefile.am.
+# Makefile.in generated by automake 1.12.2 from Makefile.am.
# @configure_input@
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+# Copyright (C) 1994-2012 Free Software Foundation, Inc.
+
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@@ -14,14 +14,28 @@
@SET_MAKE@
-#
-# $P4: //depot/projects/trustedbsd/openbsm/bin/audit/Makefile.in#12 $
-#
-
VPATH = @srcdir@
+am__make_dryrun = \
+ { \
+ am__dry=no; \
+ case $$MAKEFLAGS in \
+ *\\[\ \ ]*) \
+ echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
+ | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+ *) \
+ for am__flg in $$MAKEFLAGS; do \
+ case $$am__flg in \
+ *=*|--*) ;; \
+ *n*) am__dry=yes; break;; \
+ esac; \
+ done;; \
+ esac; \
+ test $$am__dry = yes; \
+ }
pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
@@ -38,7 +52,8 @@
host_triplet = @host@
sbin_PROGRAMS = audit$(EXEEXT)
subdir = bin/audit
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
+ $(top_srcdir)/config/depcomp
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
@@ -46,8 +61,8 @@
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/config/config.h
CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"
-sbinPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
PROGRAMS = $(sbin_PROGRAMS)
am__audit_SOURCES_DIST = audit.c auditd_controlUser.c
@USE_MACH_IPC_FALSE at am_audit_OBJECTS = audit.$(OBJEXT)
@@ -58,6 +73,7 @@
DEFAULT_INCLUDES = -I. at am__isrc@ -I$(top_builddir)/config
depcomp = $(SHELL) $(top_srcdir)/config/depcomp
am__depfiles_maybe = depfiles
+am__mv = mv -f
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
@@ -69,6 +85,38 @@
$(LDFLAGS) -o $@
SOURCES = $(audit_SOURCES)
DIST_SOURCES = $(am__audit_SOURCES_DIST)
+am__can_run_installinfo = \
+ case $$AM_UPDATE_INFO_DIR in \
+ n|no|NO) false;; \
+ *) (install-info --version) >/dev/null 2>&1;; \
+ esac
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+ *) f=$$p;; \
+ esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+ if (++n[$$2] == $(am__install_max)) \
+ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+ END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+ test -z "$$files" \
+ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+ $(am__cd) "$$dir" && rm -f $$files; }; \
+ }
man8dir = $(mandir)/man8
NROFF = nroff
MANS = $(man8_MANS)
@@ -87,22 +135,18 @@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
DSYMUTIL = @DSYMUTIL@
-ECHO = @ECHO@
+DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
-F77 = @F77@
-FFLAGS = @FFLAGS@
+FGREP = @FGREP@
GREP = @GREP@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
@@ -109,23 +153,34 @@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
LDFLAGS = @LDFLAGS@
+LEX = @LEX@
+LEXLIB = @LEXLIB@
+LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
MIG = @MIG@
MKDIR_P = @MKDIR_P@
+NM = @NM@
NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
RANLIB = @RANLIB@
@@ -134,13 +189,15 @@
SHELL = @SHELL@
STRIP = @STRIP@
VERSION = @VERSION@
+YACC = @YACC@
+YFLAGS = @YFLAGS@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
@@ -201,14 +258,14 @@
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
- && exit 0; \
+ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+ && { if test -f $@; then exit 0; else break; fi; }; \
exit 1;; \
esac; \
done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign bin/audit/Makefile'; \
- cd $(top_srcdir) && \
- $(AUTOMAKE) --foreign bin/audit/Makefile
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign bin/audit/Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --foreign bin/audit/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
@@ -226,35 +283,54 @@
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
install-sbinPROGRAMS: $(sbin_PROGRAMS)
@$(NORMAL_INSTALL)
- test -z "$(sbindir)" || $(MKDIR_P) "$(DESTDIR)$(sbindir)"
- @list='$(sbin_PROGRAMS)'; for p in $$list; do \
- p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
- if test -f $$p \
- || test -f $$p1 \
- ; then \
- f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
- echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(sbinPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(sbindir)/$$f'"; \
- $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(sbinPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(sbindir)/$$f" || exit 1; \
- else :; fi; \
- done
+ @list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \
+ if test -n "$$list"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
+ fi; \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed 's/$(EXEEXT)$$//' | \
+ while read p p1; do if test -f $$p || test -f $$p1; \
+ then echo "$$p"; echo "$$p"; else :; fi; \
+ done | \
+ sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
+ -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+ sed 'N;N;N;s,\n, ,g' | \
+ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+ if ($$2 == $$4) files[d] = files[d] " " $$1; \
+ else { print "f", $$3 "/" $$4, $$1; } } \
+ END { for (d in files) print "f", d, files[d] }' | \
+ while read type dir files; do \
+ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+ test -z "$$files" || { \
+ echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
+ $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
+ } \
+ ; done
uninstall-sbinPROGRAMS:
@$(NORMAL_UNINSTALL)
- @list='$(sbin_PROGRAMS)'; for p in $$list; do \
- f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
- echo " rm -f '$(DESTDIR)$(sbindir)/$$f'"; \
- rm -f "$(DESTDIR)$(sbindir)/$$f"; \
- done
+ @list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \
+ files=`for p in $$list; do echo "$$p"; done | \
+ sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+ -e 's/$$/$(EXEEXT)/' `; \
+ test -n "$$list" || exit 0; \
+ echo " ( cd '$(DESTDIR)$(sbindir)' && rm -f" $$files ")"; \
+ cd "$(DESTDIR)$(sbindir)" && rm -f $$files
clean-sbinPROGRAMS:
- @list='$(sbin_PROGRAMS)'; for p in $$list; do \
- f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
- echo " rm -f $$p $$f"; \
- rm -f $$p $$f ; \
- done
-audit$(EXEEXT): $(audit_OBJECTS) $(audit_DEPENDENCIES)
+ @list='$(sbin_PROGRAMS)'; test -n "$$list" || exit 0; \
+ echo " rm -f" $$list; \
+ rm -f $$list || exit $$?; \
+ test -n "$(EXEEXT)" || exit 0; \
+ list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+ echo " rm -f" $$list; \
+ rm -f $$list
+audit$(EXEEXT): $(audit_OBJECTS) $(audit_DEPENDENCIES) $(EXTRA_audit_DEPENDENCIES)
@rm -f audit$(EXEEXT)
$(LINK) $(audit_OBJECTS) $(audit_LDADD) $(LIBS)
@@ -269,7 +345,7 @@
.c.o:
@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
- at am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+ at am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(COMPILE) -c $<
@@ -276,7 +352,7 @@
.c.obj:
@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
- at am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+ at am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
@@ -283,7 +359,7 @@
.c.lo:
@am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
- at am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+ at am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $<
@@ -293,51 +369,47 @@
clean-libtool:
-rm -rf .libs _libs
-install-man8: $(man8_MANS) $(man_MANS)
+install-man8: $(man8_MANS)
@$(NORMAL_INSTALL)
- test -z "$(man8dir)" || $(MKDIR_P) "$(DESTDIR)$(man8dir)"
- @list='$(man8_MANS) $(dist_man8_MANS) $(nodist_man8_MANS)'; \
- l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
- for i in $$l2; do \
- case "$$i" in \
- *.8*) list="$$list $$i" ;; \
- esac; \
+ @list1='$(man8_MANS)'; \
+ list2=''; \
+ test -n "$(man8dir)" \
+ && test -n "`echo $$list1$$list2`" \
+ || exit 0; \
+ echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
+ { for i in $$list1; do echo "$$i"; done; \
+ if test -n "$$list2"; then \
+ for i in $$list2; do echo "$$i"; done \
+ | sed -n '/\.8[a-z]*$$/p'; \
+ fi; \
+ } | while read p; do \
+ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; echo "$$p"; \
+ done | \
+ sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+ sed 'N;N;s,\n, ,g' | { \
+ list=; while read file base inst; do \
+ if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
+ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
+ fi; \
done; \
- for i in $$list; do \
- if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
- else file=$$i; fi; \
- ext=`echo $$i | sed -e 's/^.*\\.//'`; \
- case "$$ext" in \
- 8*) ;; \
- *) ext='8' ;; \
- esac; \
- inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
- inst=`echo $$inst | sed -e 's/^.*\///'`; \
- inst=`echo $$inst | sed '$(transform)'`.$$ext; \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst"; \
- done
+ for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+ while read files; do \
+ test -z "$$files" || { \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
+ done; }
+
uninstall-man8:
@$(NORMAL_UNINSTALL)
- @list='$(man8_MANS) $(dist_man8_MANS) $(nodist_man8_MANS)'; \
- l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
- for i in $$l2; do \
- case "$$i" in \
- *.8*) list="$$list $$i" ;; \
- esac; \
- done; \
- for i in $$list; do \
- ext=`echo $$i | sed -e 's/^.*\\.//'`; \
- case "$$ext" in \
- 8*) ;; \
- *) ext='8' ;; \
- esac; \
- inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
- inst=`echo $$inst | sed -e 's/^.*\///'`; \
- inst=`echo $$inst | sed '$(transform)'`.$$ext; \
- echo " rm -f '$(DESTDIR)$(man8dir)/$$inst'"; \
- rm -f "$(DESTDIR)$(man8dir)/$$inst"; \
- done
+ @list='$(man8_MANS)'; test -n "$(man8dir)" || exit 0; \
+ files=`{ for i in $$list; do echo "$$i"; done; \
+ } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+ dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
@@ -344,7 +416,7 @@
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
- $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
mkid -fID $$unique
tags: TAGS
@@ -351,7 +423,7 @@
TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
- tags=; \
+ set x; \
here=`pwd`; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
@@ -359,15 +431,20 @@
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ shift; \
+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$tags $$unique; \
+ if test $$# -gt 0; then \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ "$$@" $$unique; \
+ else \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$unique; \
+ fi; \
fi
ctags: CTAGS
CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
- tags=; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
@@ -374,19 +451,46 @@
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
- test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$tags $$unique
+ $$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
- && cd $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) $$here
+ && $(am__cd) $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: $(HEADERS) $(SOURCES) $(LISP)
+ list='$(SOURCES) $(HEADERS) $(LISP)'; \
+ case "$(srcdir)" in \
+ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+ *) sdir=$(subdir)/$(srcdir) ;; \
+ esac; \
+ for i in $$list; do \
+ if test -f "$$i"; then \
+ echo "$(subdir)/$$i"; \
+ else \
+ echo "$$sdir/$$i"; \
+ fi; \
+ done >> $(top_builddir)/cscope.files
+
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
distdir: $(DISTFILES)
+ @list='$(MANS)'; if test -n "$$list"; then \
+ list=`for p in $$list; do \
+ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+ if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
+ if test -n "$$list" && \
+ grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
+ echo "error: found man pages containing the 'missing help2man' replacement text:" >&2; \
+ grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \
+ echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \
+ echo " typically 'make maintainer-clean' will remove them" >&2; \
+ exit 1; \
+ else :; fi; \
+ else :; fi
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
@@ -402,13 +506,17 @@
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
@@ -429,10 +537,15 @@
installcheck: installcheck-am
install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+ if test -z '$(STRIP)'; then \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ install; \
+ else \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+ fi
mostlyclean-generic:
clean-generic:
@@ -440,6 +553,7 @@
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@@ -461,6 +575,8 @@
html: html-am
+html-am:
+
info: info-am
info-am:
@@ -469,18 +585,28 @@
install-dvi: install-dvi-am
+install-dvi-am:
+
install-exec-am: install-sbinPROGRAMS
install-html: install-html-am
+install-html-am:
+
install-info: install-info-am
+install-info-am:
+
install-man: install-man8
install-pdf: install-pdf-am
+install-pdf-am:
+
install-ps: install-ps-am
+install-ps-am:
+
installcheck-am:
maintainer-clean: maintainer-clean-am
@@ -508,7 +634,7 @@
.MAKE: install-am install-strip
.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
- clean-libtool clean-sbinPROGRAMS ctags distclean \
+ clean-libtool clean-sbinPROGRAMS cscopelist ctags distclean \
distclean-compile distclean-generic distclean-libtool \
distclean-tags distdir dvi dvi-am html html-am info info-am \
install install-am install-data install-data-am install-dvi \
@@ -525,6 +651,7 @@
@USE_MACH_IPC_TRUE at auditd_controlUser.c auditd_control.h: $(top_srcdir)/bin/auditd/auditd_control.defs
@USE_MACH_IPC_TRUE@ $(MIG) -user auditd_controlUser.c -header auditd_control.h -server /dev/null -sheader /dev/null $(top_srcdir)/bin/auditd/auditd_control.defs
+
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
Modified: trunk/contrib/openbsm/bin/audit/audit.8
===================================================================
--- trunk/contrib/openbsm/bin/audit/audit.8 2016-09-18 22:43:06 UTC (rev 8504)
+++ trunk/contrib/openbsm/bin/audit/audit.8 2016-09-18 22:45:22 UTC (rev 8505)
@@ -25,7 +25,7 @@
.\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
.\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
.\"
-.\" $P4: //depot/projects/trustedbsd/openbsm/bin/audit/audit.8#15 $
+.\" $P4: //depot/projects/trustedbsd/openbsm/bin/audit/audit.8#16 $
.\"
.Dd January 29, 2009
.Dt AUDIT 8
@@ -46,18 +46,18 @@
.It Fl e
Forces the audit system to immediately remove audit log files that
meet the expiration criteria specified in the audit control file without
-doing a log rotation.
+doing a log rotation.
.It Fl i
Initializes and starts auditing.
This option is currently for Mac OS X only
and requires
.Xr auditd 8
-to be configured to run under
+to be configured to run under
.Xr launchd 8 .
.It Fl n
Forces the audit system to close the existing audit log file and rotate to
a new log file in a location specified in the audit control file.
-Also, audit log files that meet the expiration criteria specified in the
+Also, audit log files that meet the expiration criteria specified in the
audit control file will be removed.
.It Fl s
Specifies that the audit system should [re]synchronize its
@@ -77,7 +77,7 @@
.Xr launchd 8
(Mac OS X only).
The
-.Nm
+.Nm
utility requires audit administrator privileges for successful operation.
.Sh FILES
.Bl -tag -width ".Pa /etc/security/audit_control" -compact
Modified: trunk/contrib/openbsm/bin/auditd/Makefile.am
===================================================================
--- trunk/contrib/openbsm/bin/auditd/Makefile.am 2016-09-18 22:43:06 UTC (rev 8504)
+++ trunk/contrib/openbsm/bin/auditd/Makefile.am 2016-09-18 22:45:22 UTC (rev 8505)
@@ -1,6 +1,6 @@
-#
-# $P4: //depot/projects/trustedbsd/openbsm/bin/auditd/Makefile.am#5 $
-#
+##
+## $P4: //depot/projects/trustedbsd/openbsm/bin/auditd/Makefile.am#6 $
+##
if USE_NATIVE_INCLUDES
INCLUDES = -I$(top_builddir) -I$(top_srcdir)
Modified: trunk/contrib/openbsm/bin/auditd/Makefile.in
===================================================================
--- trunk/contrib/openbsm/bin/auditd/Makefile.in 2016-09-18 22:43:06 UTC (rev 8504)
+++ trunk/contrib/openbsm/bin/auditd/Makefile.in 2016-09-18 22:45:22 UTC (rev 8505)
@@ -1,8 +1,8 @@
-# Makefile.in generated by automake 1.10.1 from Makefile.am.
+# Makefile.in generated by automake 1.12.2 from Makefile.am.
# @configure_input@
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+# Copyright (C) 1994-2012 Free Software Foundation, Inc.
+
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@@ -14,14 +14,28 @@
@SET_MAKE@
-#
-# $P4: //depot/projects/trustedbsd/openbsm/bin/auditd/Makefile.in#11 $
-#
-
VPATH = @srcdir@
+am__make_dryrun = \
+ { \
+ am__dry=no; \
+ case $$MAKEFLAGS in \
+ *\\[\ \ ]*) \
+ echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
+ | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+ *) \
+ for am__flg in $$MAKEFLAGS; do \
+ case $$am__flg in \
+ *=*|--*) ;; \
+ *n*) am__dry=yes; break;; \
+ esac; \
+ done;; \
+ esac; \
+ test $$am__dry = yes; \
+ }
pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
@@ -38,7 +52,8 @@
host_triplet = @host@
sbin_PROGRAMS = auditd$(EXEEXT)
subdir = bin/auditd
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
+ $(top_srcdir)/config/depcomp
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
@@ -46,8 +61,8 @@
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/config/config.h
CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"
-sbinPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
PROGRAMS = $(sbin_PROGRAMS)
am__auditd_SOURCES_DIST = audit_warn.c auditd.c auditd_fbsd.c \
auditd_controlServer.c audit_triggersServer.c auditd_darwin.c
@@ -63,6 +78,7 @@
DEFAULT_INCLUDES = -I. at am__isrc@ -I$(top_builddir)/config
depcomp = $(SHELL) $(top_srcdir)/config/depcomp
am__depfiles_maybe = depfiles
+am__mv = mv -f
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
@@ -74,6 +90,38 @@
$(LDFLAGS) -o $@
SOURCES = $(auditd_SOURCES)
DIST_SOURCES = $(am__auditd_SOURCES_DIST)
+am__can_run_installinfo = \
+ case $$AM_UPDATE_INFO_DIR in \
+ n|no|NO) false;; \
+ *) (install-info --version) >/dev/null 2>&1;; \
+ esac
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+ *) f=$$p;; \
+ esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+ if (++n[$$2] == $(am__install_max)) \
+ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+ END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+ test -z "$$files" \
+ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+ $(am__cd) "$$dir" && rm -f $$files; }; \
+ }
man8dir = $(mandir)/man8
NROFF = nroff
MANS = $(man8_MANS)
@@ -92,22 +140,18 @@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
DSYMUTIL = @DSYMUTIL@
-ECHO = @ECHO@
+DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
-F77 = @F77@
-FFLAGS = @FFLAGS@
+FGREP = @FGREP@
GREP = @GREP@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
@@ -114,23 +158,34 @@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
LDFLAGS = @LDFLAGS@
+LEX = @LEX@
+LEXLIB = @LEXLIB@
+LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
MIG = @MIG@
MKDIR_P = @MKDIR_P@
+NM = @NM@
NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
RANLIB = @RANLIB@
@@ -139,13 +194,15 @@
SHELL = @SHELL@
STRIP = @STRIP@
VERSION = @VERSION@
+YACC = @YACC@
+YFLAGS = @YFLAGS@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
@@ -206,14 +263,14 @@
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
- && exit 0; \
+ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+ && { if test -f $@; then exit 0; else break; fi; }; \
exit 1;; \
esac; \
done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign bin/auditd/Makefile'; \
- cd $(top_srcdir) && \
- $(AUTOMAKE) --foreign bin/auditd/Makefile
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign bin/auditd/Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --foreign bin/auditd/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
@@ -231,35 +288,54 @@
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
install-sbinPROGRAMS: $(sbin_PROGRAMS)
@$(NORMAL_INSTALL)
- test -z "$(sbindir)" || $(MKDIR_P) "$(DESTDIR)$(sbindir)"
- @list='$(sbin_PROGRAMS)'; for p in $$list; do \
- p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
- if test -f $$p \
- || test -f $$p1 \
- ; then \
- f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
- echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(sbinPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(sbindir)/$$f'"; \
- $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(sbinPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(sbindir)/$$f" || exit 1; \
- else :; fi; \
- done
+ @list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \
+ if test -n "$$list"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
+ fi; \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed 's/$(EXEEXT)$$//' | \
+ while read p p1; do if test -f $$p || test -f $$p1; \
+ then echo "$$p"; echo "$$p"; else :; fi; \
+ done | \
+ sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
+ -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+ sed 'N;N;N;s,\n, ,g' | \
+ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+ if ($$2 == $$4) files[d] = files[d] " " $$1; \
+ else { print "f", $$3 "/" $$4, $$1; } } \
+ END { for (d in files) print "f", d, files[d] }' | \
+ while read type dir files; do \
+ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+ test -z "$$files" || { \
+ echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
+ $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
+ } \
+ ; done
uninstall-sbinPROGRAMS:
@$(NORMAL_UNINSTALL)
- @list='$(sbin_PROGRAMS)'; for p in $$list; do \
- f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
- echo " rm -f '$(DESTDIR)$(sbindir)/$$f'"; \
- rm -f "$(DESTDIR)$(sbindir)/$$f"; \
- done
+ @list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \
+ files=`for p in $$list; do echo "$$p"; done | \
+ sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+ -e 's/$$/$(EXEEXT)/' `; \
+ test -n "$$list" || exit 0; \
+ echo " ( cd '$(DESTDIR)$(sbindir)' && rm -f" $$files ")"; \
+ cd "$(DESTDIR)$(sbindir)" && rm -f $$files
clean-sbinPROGRAMS:
- @list='$(sbin_PROGRAMS)'; for p in $$list; do \
- f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
- echo " rm -f $$p $$f"; \
- rm -f $$p $$f ; \
- done
-auditd$(EXEEXT): $(auditd_OBJECTS) $(auditd_DEPENDENCIES)
+ @list='$(sbin_PROGRAMS)'; test -n "$$list" || exit 0; \
+ echo " rm -f" $$list; \
+ rm -f $$list || exit $$?; \
+ test -n "$(EXEEXT)" || exit 0; \
+ list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+ echo " rm -f" $$list; \
+ rm -f $$list
+auditd$(EXEEXT): $(auditd_OBJECTS) $(auditd_DEPENDENCIES) $(EXTRA_auditd_DEPENDENCIES)
@rm -f auditd$(EXEEXT)
$(LINK) $(auditd_OBJECTS) $(auditd_LDADD) $(LIBS)
@@ -278,7 +354,7 @@
.c.o:
@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
- at am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+ at am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(COMPILE) -c $<
@@ -285,7 +361,7 @@
.c.obj:
@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
- at am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+ at am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
@@ -292,7 +368,7 @@
.c.lo:
@am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
- at am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+ at am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $<
@@ -302,51 +378,47 @@
clean-libtool:
-rm -rf .libs _libs
-install-man8: $(man8_MANS) $(man_MANS)
+install-man8: $(man8_MANS)
@$(NORMAL_INSTALL)
- test -z "$(man8dir)" || $(MKDIR_P) "$(DESTDIR)$(man8dir)"
- @list='$(man8_MANS) $(dist_man8_MANS) $(nodist_man8_MANS)'; \
- l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
- for i in $$l2; do \
- case "$$i" in \
- *.8*) list="$$list $$i" ;; \
- esac; \
+ @list1='$(man8_MANS)'; \
+ list2=''; \
+ test -n "$(man8dir)" \
+ && test -n "`echo $$list1$$list2`" \
+ || exit 0; \
+ echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
+ { for i in $$list1; do echo "$$i"; done; \
+ if test -n "$$list2"; then \
+ for i in $$list2; do echo "$$i"; done \
+ | sed -n '/\.8[a-z]*$$/p'; \
+ fi; \
+ } | while read p; do \
+ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; echo "$$p"; \
+ done | \
+ sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+ sed 'N;N;s,\n, ,g' | { \
+ list=; while read file base inst; do \
+ if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
+ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
+ fi; \
done; \
- for i in $$list; do \
- if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
- else file=$$i; fi; \
- ext=`echo $$i | sed -e 's/^.*\\.//'`; \
- case "$$ext" in \
- 8*) ;; \
- *) ext='8' ;; \
- esac; \
- inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
- inst=`echo $$inst | sed -e 's/^.*\///'`; \
- inst=`echo $$inst | sed '$(transform)'`.$$ext; \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst"; \
- done
+ for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+ while read files; do \
+ test -z "$$files" || { \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
+ done; }
+
uninstall-man8:
@$(NORMAL_UNINSTALL)
- @list='$(man8_MANS) $(dist_man8_MANS) $(nodist_man8_MANS)'; \
- l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
- for i in $$l2; do \
- case "$$i" in \
- *.8*) list="$$list $$i" ;; \
- esac; \
- done; \
- for i in $$list; do \
- ext=`echo $$i | sed -e 's/^.*\\.//'`; \
- case "$$ext" in \
- 8*) ;; \
- *) ext='8' ;; \
- esac; \
- inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
- inst=`echo $$inst | sed -e 's/^.*\///'`; \
- inst=`echo $$inst | sed '$(transform)'`.$$ext; \
- echo " rm -f '$(DESTDIR)$(man8dir)/$$inst'"; \
- rm -f "$(DESTDIR)$(man8dir)/$$inst"; \
- done
+ @list='$(man8_MANS)'; test -n "$(man8dir)" || exit 0; \
+ files=`{ for i in $$list; do echo "$$i"; done; \
+ } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+ dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
@@ -353,7 +425,7 @@
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
- $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
mkid -fID $$unique
tags: TAGS
@@ -360,7 +432,7 @@
TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
- tags=; \
+ set x; \
here=`pwd`; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
@@ -368,15 +440,20 @@
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ shift; \
+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$tags $$unique; \
+ if test $$# -gt 0; then \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ "$$@" $$unique; \
+ else \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$unique; \
+ fi; \
fi
ctags: CTAGS
CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
- tags=; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
@@ -383,19 +460,46 @@
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
- test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$tags $$unique
+ $$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
- && cd $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) $$here
+ && $(am__cd) $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: $(HEADERS) $(SOURCES) $(LISP)
+ list='$(SOURCES) $(HEADERS) $(LISP)'; \
+ case "$(srcdir)" in \
+ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+ *) sdir=$(subdir)/$(srcdir) ;; \
+ esac; \
+ for i in $$list; do \
+ if test -f "$$i"; then \
+ echo "$(subdir)/$$i"; \
+ else \
+ echo "$$sdir/$$i"; \
+ fi; \
+ done >> $(top_builddir)/cscope.files
+
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
distdir: $(DISTFILES)
+ @list='$(MANS)'; if test -n "$$list"; then \
+ list=`for p in $$list; do \
+ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+ if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
+ if test -n "$$list" && \
+ grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
+ echo "error: found man pages containing the 'missing help2man' replacement text:" >&2; \
+ grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \
+ echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \
+ echo " typically 'make maintainer-clean' will remove them" >&2; \
+ exit 1; \
+ else :; fi; \
+ else :; fi
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
@@ -411,13 +515,17 @@
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
@@ -438,10 +546,15 @@
installcheck: installcheck-am
install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+ if test -z '$(STRIP)'; then \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ install; \
+ else \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+ fi
mostlyclean-generic:
clean-generic:
@@ -449,6 +562,7 @@
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@@ -470,6 +584,8 @@
html: html-am
+html-am:
+
info: info-am
info-am:
@@ -478,18 +594,28 @@
install-dvi: install-dvi-am
+install-dvi-am:
+
install-exec-am: install-sbinPROGRAMS
install-html: install-html-am
+install-html-am:
+
install-info: install-info-am
+install-info-am:
+
install-man: install-man8
install-pdf: install-pdf-am
+install-pdf-am:
+
install-ps: install-ps-am
+install-ps-am:
+
installcheck-am:
maintainer-clean: maintainer-clean-am
@@ -517,7 +643,7 @@
.MAKE: install-am install-strip
.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
- clean-libtool clean-sbinPROGRAMS ctags distclean \
+ clean-libtool clean-sbinPROGRAMS cscopelist ctags distclean \
distclean-compile distclean-generic distclean-libtool \
distclean-tags distdir dvi dvi-am html html-am info info-am \
install install-am install-data install-data-am install-dvi \
@@ -537,6 +663,7 @@
@USE_MACH_IPC_TRUE at audit_triggersServer.c audit_triggersServer.h: audit_triggers.defs
@USE_MACH_IPC_TRUE@ $(MIG) -user /dev/null -header /dev/null -server audit_triggersServer.c -sheader audit_triggersServer.h $(top_srcdir)/bin/auditd/audit_triggers.defs
+
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
Modified: trunk/contrib/openbsm/bin/auditd/auditd.8
===================================================================
--- trunk/contrib/openbsm/bin/auditd/auditd.8 2016-09-18 22:43:06 UTC (rev 8504)
+++ trunk/contrib/openbsm/bin/auditd/auditd.8 2016-09-18 22:45:22 UTC (rev 8505)
@@ -25,7 +25,7 @@
.\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
.\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
.\"
-.\" $P4: //depot/projects/trustedbsd/openbsm/bin/auditd/auditd.8#17 $
+.\" $P4: //depot/projects/trustedbsd/openbsm/bin/auditd/auditd.8#19 $
.\"
.Dd December 11, 2008
.Dt AUDITD 8
@@ -59,7 +59,7 @@
.Pp
Optionally, the audit review group "audit" may be created.
Non-privileged
-users that are members of this group may read the audit trail log files.
+users that are members of this group may read the audit trail log files.
.Sh NOTE
To assure uninterrupted audit support, the
.Nm
@@ -72,21 +72,21 @@
.Pa audit_control
file.
.Pp
-If
+If
.Nm
is started on-demand by
-.Xr launchd 8
+.Xr launchd 8
then auditing should only be started and stopped with
.Xr audit 8 .
.Pp
-On Mac OS X,
+On Mac OS X,
.Nm
-uses the
+uses the
.Xr asl 3
API for writing system log messages.
-Therefore, only the audit administrator
+Therefore, only the audit administrator
and members of the audit review group will be able to read the
-system log entries.
+system log entries.
.Sh FILES
.Bl -tag -width ".Pa /etc/security" -compact
.It Pa /var/audit
@@ -93,12 +93,12 @@
Default directory for storing audit log files.
.Pp
.It Pa /etc/security
-The directory containing the auditing configuration files
+The directory containing the auditing configuration files
.Xr audit_class 5 ,
.Xr audit_control 5 ,
.Xr audit_event 5 ,
and
-.Xr audit_warn 5 .
+.Xr audit_warn 5 .
.El
.Sh COMPATIBILITY
The historical
@@ -122,6 +122,7 @@
.Xr audit_event 5 ,
.Xr audit_warn 5 ,
.Xr audit 8 ,
+.Xr auditdistd 8 ,
.Xr launchd 8
.Sh HISTORY
The OpenBSM implementation was created by McAfee Research, the security
Modified: trunk/contrib/openbsm/bin/auditd/auditd.c
===================================================================
--- trunk/contrib/openbsm/bin/auditd/auditd.c 2016-09-18 22:43:06 UTC (rev 8504)
+++ trunk/contrib/openbsm/bin/auditd/auditd.c 2016-09-18 22:45:22 UTC (rev 8505)
@@ -26,7 +26,7 @@
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
- * $P4: //depot/projects/trustedbsd/openbsm/bin/auditd/auditd.c#46 $
+ * $P4: //depot/projects/trustedbsd/openbsm/bin/auditd/auditd.c#50 $
*/
#include <sys/types.h>
@@ -36,9 +36,9 @@
#include <sys/dirent.h>
#ifdef HAVE_FULL_QUEUE_H
#include <sys/queue.h>
-#else /* !HAVE_FULL_QUEUE_H */
+#else /* !HAVE_FULL_QUEUE_H */
#include <compat/queue.h>
-#endif /* !HAVE_FULL_QUEUE_H */
+#endif /* !HAVE_FULL_QUEUE_H */
#include <sys/mman.h>
#include <sys/param.h>
#include <sys/stat.h>
@@ -79,21 +79,21 @@
/*
- * LaunchD flag (Mac OS X and, maybe, FreeBSD only.) See launchd(8) and
+ * LaunchD flag (Mac OS X and, maybe, FreeBSD only.) See launchd(8) and
* http://wiki.freebsd.org/launchd for more information.
*
- * In order for auditd to work "on demand" with launchd(8) it can't:
- * call daemon(3)
- * call fork and having the parent process exit
- * change uids or gids.
- * set up the current working directory or chroot.
- * set the session id
- * change stdio to /dev/null.
- * call setrusage(2)
- * call setpriority(2)
- * Ignore SIGTERM.
- * auditd (in 'launchd mode') is launched on demand so it must catch
- * SIGTERM to exit cleanly.
+ * In order for auditd to work "on demand" with launchd(8) it can't:
+ * call daemon(3)
+ * call fork and having the parent process exit
+ * change uids or gids.
+ * set up the current working directory or chroot.
+ * set the session id
+ * change stdio to /dev/null.
+ * call setrusage(2)
+ * call setpriority(2)
+ * Ignore SIGTERM.
+ * auditd (in 'launchd mode') is launched on demand so it must catch
+ * SIGTERM to exit cleanly.
*/
static int launchd_flag = 0;
@@ -133,7 +133,7 @@
if (cf == NULL) {
auditd_log_err("malloc failed: %m");
return (NULL);
- }
+ }
len = readlink(AUDIT_CURRENT_LINK, cf, MAXPATHLEN - 1);
if (len < 0) {
@@ -142,7 +142,7 @@
}
/* readlink() doesn't terminate string. */
- cf[len] = '\0';
+ cf[len] = '\0';
return (cf);
}
@@ -155,38 +155,35 @@
{
char *ptr;
char *oldname;
- size_t len;
/* If lastfile is NULL try to get it from the 'current' link. */
if (lastfile == NULL)
lastfile = get_curfile();
-
+
if (lastfile != NULL) {
- len = strlen(lastfile) + 1;
- oldname = (char *)malloc(len);
+ oldname = strdup(lastfile);
if (oldname == NULL)
return (-1);
- strlcpy(oldname, lastfile, len);
/* Rename the last file -- append timestamp. */
if ((ptr = strstr(lastfile, NOT_TERMINATED)) != NULL) {
memcpy(ptr, TS, POSTFIX_LEN);
- if (rename(oldname, lastfile) != 0)
+ if (auditd_rename(oldname, lastfile) != 0)
auditd_log_err(
"Could not rename %s to %s: %m", oldname,
lastfile);
else {
- /*
+ /*
* Remove the 'current' symlink since the link
- * is now invalid.
+ * is now invalid.
*/
(void) unlink(AUDIT_CURRENT_LINK);
- auditd_log_notice( "renamed %s to %s",
+ auditd_log_notice("renamed %s to %s",
oldname, lastfile);
audit_warn_closefile(lastfile);
}
- } else
- auditd_log_err( "Could not rename %s to %s", oldname,
+ } else
+ auditd_log_err("Could not rename %s to %s", oldname,
lastfile);
free(lastfile);
free(oldname);
@@ -202,16 +199,39 @@
swap_audit_file(void)
{
int err;
- char *newfile;
- char TS[TIMESTAMP_LEN];
+ char *newfile, *name;
+ char TS[TIMESTAMP_LEN + 1];
time_t tt;
- if (getTSstr(tt, TS, TIMESTAMP_LEN) != 0)
+ if (getTSstr(tt, TS, sizeof(TS)) != 0)
return (-1);
+ /*
+ * If prefix and suffix are the same, it means that records are
+ * being produced too fast. We don't want to rename now, because
+ * next trail file can get the same name and once that one is
+ * terminated also within one second it will overwrite the current
+ * one. Just keep writing to the same trail and wait for the next
+ * trigger from the kernel.
+ * FREEBSD KERNEL WAS UPDATED TO KEEP SENDING TRIGGERS, WHICH MIGHT
+ * NOT BE THE CASE FOR OTHER OSES.
+ * If the kernel will not keep sending triggers, trail file will not
+ * be terminated.
+ */
+ if (lastfile == NULL) {
+ name = NULL;
+ } else {
+ name = strrchr(lastfile, '/');
+ if (name != NULL)
+ name++;
+ }
+ if (name != NULL && strncmp(name, TS, TIMESTAMP_LEN) == 0) {
+ auditd_log_debug("Not ready to terminate trail file yet.");
+ return (0);
+ }
err = auditd_swap_trail(TS, &newfile, audit_review_gid,
audit_warn_getacdir);
if (err != ADE_NOERR) {
- auditd_log_err( "%s: %m", auditd_strerror(err));
+ auditd_log_err("%s: %m", auditd_strerror(err));
if (err != ADE_ACTL)
return (-1);
}
@@ -229,13 +249,13 @@
* enabled) so updated the cached state as well.
*/
auditd_set_state(AUD_STATE_ENABLED);
-
+
/*
* Create 'current' symlink. Recover from crash, if needed.
*/
if (auditd_new_curlink(newfile) != 0)
- auditd_log_err("auditd_new_curlink(\"%s\") failed: %s: %m",
- newfile, auditd_strerror(err));
+ auditd_log_err("auditd_new_curlink(\"%s\") failed: %s: %m",
+ newfile, auditd_strerror(err));
lastfile = newfile;
auditd_log_notice("New audit file is %s", newfile);
@@ -298,6 +318,14 @@
{
int err;
+ /* Configure trail files distribution. */
+ err = auditd_set_dist();
+ if (err) {
+ auditd_log_err("auditd_set_dist() %s: %m",
+ auditd_strerror(err));
+ } else
+ auditd_log_debug("Configured trail files distribution.");
+
if (do_trail_file() == -1) {
auditd_log_err("Error creating audit trail file");
fail_exit();
@@ -306,19 +334,18 @@
/* Generate an audit record. */
err = auditd_gen_record(AUE_audit_startup, NULL);
if (err)
- auditd_log_err("auditd_gen_record(AUE_audit_startup) %s: %m",
+ auditd_log_err("auditd_gen_record(AUE_audit_startup) %s: %m",
auditd_strerror(err));
-
+
if (auditd_config_controls() == 0)
auditd_log_info("Audit controls init successful");
else
auditd_log_err("Audit controls init failed");
-
}
/*
- * Close auditd pid file and trigger mechanism.
+ * Close auditd pid file and trigger mechanism.
*/
static int
close_misc(void)
@@ -345,7 +372,7 @@
close_all(void)
{
int err_ret = 0;
- char TS[TIMESTAMP_LEN];
+ char TS[TIMESTAMP_LEN + 1];
int err;
int cond;
time_t tt;
@@ -352,7 +379,7 @@
err = auditd_gen_record(AUE_audit_shutdown, NULL);
if (err)
- auditd_log_err("auditd_gen_record(AUE_audit_shutdown) %s: %m",
+ auditd_log_err("auditd_gen_record(AUE_audit_shutdown) %s: %m",
auditd_strerror(err));
/* Flush contents. */
@@ -368,7 +395,7 @@
*/
auditd_set_state(AUD_STATE_DISABLED);
- if (getTSstr(tt, TS, TIMESTAMP_LEN) == 0)
+ if (getTSstr(tt, TS, sizeof(TS)) == 0)
close_lastfile(TS);
if (lastfile != NULL)
free(lastfile);
@@ -513,7 +540,7 @@
/*
* Message processing is done here.
- */
+ */
switch(trigger) {
case AUDIT_TRIGGER_LOW_SPACE:
auditd_log_notice("Got low space trigger");
@@ -554,7 +581,7 @@
* send SIGTERM.
*/
if (!launchd_flag) {
- auditd_log_info("auditd exiting.");
+ auditd_log_info("auditd exiting.");
exit (err);
}
break;
@@ -570,7 +597,7 @@
err = auditd_expire_trails(audit_warn_expired);
if (err)
auditd_log_err("auditd_expire_trails(): %s",
- auditd_strerror(err));
+ auditd_strerror(err));
break;
default:
@@ -609,7 +636,7 @@
int ret;
auditd_reap_children();
-
+
if (launchd_flag)
ret = close_misc();
else
@@ -630,7 +657,7 @@
/*
* Configure event to class mappings in kernel.
- */
+ */
cnt = auditd_set_evcmap();
if (cnt < 0) {
auditd_log_err("auditd_set_evcmap() failed: %m");
@@ -646,7 +673,7 @@
*/
err = auditd_set_namask();
if (err) {
- auditd_log_err("auditd_set_namask() %s: %m",
+ auditd_log_err("auditd_set_namask() %s: %m",
auditd_strerror(err));
ret = -1;
} else
@@ -657,12 +684,12 @@
*/
err = auditd_set_policy();
if (err) {
- auditd_log_err("auditd_set_policy() %s: %m",
+ auditd_log_err("auditd_set_policy() %s: %m",
auditd_strerror(err));
ret = -1;
} else
auditd_log_debug("Set audit policy in kernel.");
-
+
/*
* Configure audit trail log size in kernel.
*/
@@ -673,9 +700,9 @@
ret = -1;
} else
auditd_log_debug("Set audit trail size in kernel.");
-
+
/*
- * Configure audit trail volume minimum free percentage of blocks in
+ * Configure audit trail volume minimum free percentage of blocks in
* kernel.
*/
err = auditd_set_minfree();
@@ -684,11 +711,11 @@
auditd_strerror(err));
ret = -1;
} else
- auditd_log_debug(
+ auditd_log_debug(
"Set audit trail min free percent in kernel.");
/*
- * Configure host address in the audit kernel information.
+ * Configure host address in the audit kernel information.
*/
err = auditd_set_host();
if (err) {
@@ -730,7 +757,7 @@
*/
err = auditd_prevent_audit();
if (err) {
- auditd_log_err("auditd_prevent_audit() %s: %m",
+ auditd_log_err("auditd_prevent_audit() %s: %m",
auditd_strerror(err));
fail_exit();
}
@@ -785,7 +812,7 @@
* likely the wheel group. Is there a better way to deal with this?
*/
grp = getgrnam(AUDIT_REVIEW_GROUP);
- if (grp != NULL)
+ if (grp != NULL)
audit_review_gid = grp->gr_gid;
#endif
@@ -815,7 +842,7 @@
setup();
/*
- * auditd_wait_for_events() shouldn't return unless something is wrong.
+ * auditd_wait_for_events() shouldn't return unless something is wrong.
*/
auditd_wait_for_events();
Modified: trunk/contrib/openbsm/bin/auditfilterd/Makefile.am
===================================================================
--- trunk/contrib/openbsm/bin/auditfilterd/Makefile.am 2016-09-18 22:43:06 UTC (rev 8504)
+++ trunk/contrib/openbsm/bin/auditfilterd/Makefile.am 2016-09-18 22:45:22 UTC (rev 8505)
@@ -1,6 +1,6 @@
-#
-# $P4: //depot/projects/trustedbsd/openbsm/bin/auditfilterd/Makefile.am#3 $
-#
+##
+## $P4: //depot/projects/trustedbsd/openbsm/bin/auditfilterd/Makefile.am#4 $
+##
if USE_NATIVE_INCLUDES
INCLUDES = -I$(top_builddir) -I$(top_srcdir)
Modified: trunk/contrib/openbsm/bin/auditfilterd/Makefile.in
===================================================================
--- trunk/contrib/openbsm/bin/auditfilterd/Makefile.in 2016-09-18 22:43:06 UTC (rev 8504)
+++ trunk/contrib/openbsm/bin/auditfilterd/Makefile.in 2016-09-18 22:45:22 UTC (rev 8505)
@@ -1,8 +1,8 @@
-# Makefile.in generated by automake 1.10.1 from Makefile.am.
+# Makefile.in generated by automake 1.12.2 from Makefile.am.
# @configure_input@
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+# Copyright (C) 1994-2012 Free Software Foundation, Inc.
+
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@@ -14,14 +14,28 @@
@SET_MAKE@
-#
-# $P4: //depot/projects/trustedbsd/openbsm/bin/auditfilterd/Makefile.in#8 $
-#
-
VPATH = @srcdir@
+am__make_dryrun = \
+ { \
+ am__dry=no; \
+ case $$MAKEFLAGS in \
+ *\\[\ \ ]*) \
+ echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
+ | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+ *) \
+ for am__flg in $$MAKEFLAGS; do \
+ case $$am__flg in \
+ *=*|--*) ;; \
+ *n*) am__dry=yes; break;; \
+ esac; \
+ done;; \
+ esac; \
+ test $$am__dry = yes; \
+ }
pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
@@ -38,7 +52,8 @@
host_triplet = @host@
sbin_PROGRAMS = auditfilterd$(EXEEXT)
subdir = bin/auditfilterd
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
+ $(top_srcdir)/config/depcomp
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
@@ -46,8 +61,8 @@
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/config/config.h
CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"
-sbinPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
PROGRAMS = $(sbin_PROGRAMS)
am_auditfilterd_OBJECTS = auditfilterd_conf.$(OBJEXT) \
auditfilterd.$(OBJEXT)
@@ -56,6 +71,7 @@
DEFAULT_INCLUDES = -I. at am__isrc@ -I$(top_builddir)/config
depcomp = $(SHELL) $(top_srcdir)/config/depcomp
am__depfiles_maybe = depfiles
+am__mv = mv -f
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
@@ -67,6 +83,38 @@
$(LDFLAGS) -o $@
SOURCES = $(auditfilterd_SOURCES)
DIST_SOURCES = $(auditfilterd_SOURCES)
+am__can_run_installinfo = \
+ case $$AM_UPDATE_INFO_DIR in \
+ n|no|NO) false;; \
+ *) (install-info --version) >/dev/null 2>&1;; \
+ esac
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+ *) f=$$p;; \
+ esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+ if (++n[$$2] == $(am__install_max)) \
+ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+ END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+ test -z "$$files" \
+ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+ $(am__cd) "$$dir" && rm -f $$files; }; \
+ }
man8dir = $(mandir)/man8
NROFF = nroff
MANS = $(man8_MANS)
@@ -85,22 +133,18 @@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
DSYMUTIL = @DSYMUTIL@
-ECHO = @ECHO@
+DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
-F77 = @F77@
-FFLAGS = @FFLAGS@
+FGREP = @FGREP@
GREP = @GREP@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
@@ -107,23 +151,34 @@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
LDFLAGS = @LDFLAGS@
+LEX = @LEX@
+LEXLIB = @LEXLIB@
+LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
MIG = @MIG@
MKDIR_P = @MKDIR_P@
+NM = @NM@
NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
RANLIB = @RANLIB@
@@ -132,13 +187,15 @@
SHELL = @SHELL@
STRIP = @STRIP@
VERSION = @VERSION@
+YACC = @YACC@
+YFLAGS = @YFLAGS@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
@@ -197,14 +254,14 @@
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
- && exit 0; \
+ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+ && { if test -f $@; then exit 0; else break; fi; }; \
exit 1;; \
esac; \
done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign bin/auditfilterd/Makefile'; \
- cd $(top_srcdir) && \
- $(AUTOMAKE) --foreign bin/auditfilterd/Makefile
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign bin/auditfilterd/Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --foreign bin/auditfilterd/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
@@ -222,35 +279,54 @@
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
install-sbinPROGRAMS: $(sbin_PROGRAMS)
@$(NORMAL_INSTALL)
- test -z "$(sbindir)" || $(MKDIR_P) "$(DESTDIR)$(sbindir)"
- @list='$(sbin_PROGRAMS)'; for p in $$list; do \
- p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
- if test -f $$p \
- || test -f $$p1 \
- ; then \
- f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
- echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(sbinPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(sbindir)/$$f'"; \
- $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(sbinPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(sbindir)/$$f" || exit 1; \
- else :; fi; \
- done
+ @list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \
+ if test -n "$$list"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
+ fi; \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed 's/$(EXEEXT)$$//' | \
+ while read p p1; do if test -f $$p || test -f $$p1; \
+ then echo "$$p"; echo "$$p"; else :; fi; \
+ done | \
+ sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
+ -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+ sed 'N;N;N;s,\n, ,g' | \
+ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+ if ($$2 == $$4) files[d] = files[d] " " $$1; \
+ else { print "f", $$3 "/" $$4, $$1; } } \
+ END { for (d in files) print "f", d, files[d] }' | \
+ while read type dir files; do \
+ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+ test -z "$$files" || { \
+ echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
+ $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
+ } \
+ ; done
uninstall-sbinPROGRAMS:
@$(NORMAL_UNINSTALL)
- @list='$(sbin_PROGRAMS)'; for p in $$list; do \
- f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
- echo " rm -f '$(DESTDIR)$(sbindir)/$$f'"; \
- rm -f "$(DESTDIR)$(sbindir)/$$f"; \
- done
+ @list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \
+ files=`for p in $$list; do echo "$$p"; done | \
+ sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+ -e 's/$$/$(EXEEXT)/' `; \
+ test -n "$$list" || exit 0; \
+ echo " ( cd '$(DESTDIR)$(sbindir)' && rm -f" $$files ")"; \
+ cd "$(DESTDIR)$(sbindir)" && rm -f $$files
clean-sbinPROGRAMS:
- @list='$(sbin_PROGRAMS)'; for p in $$list; do \
- f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
- echo " rm -f $$p $$f"; \
- rm -f $$p $$f ; \
- done
-auditfilterd$(EXEEXT): $(auditfilterd_OBJECTS) $(auditfilterd_DEPENDENCIES)
+ @list='$(sbin_PROGRAMS)'; test -n "$$list" || exit 0; \
+ echo " rm -f" $$list; \
+ rm -f $$list || exit $$?; \
+ test -n "$(EXEEXT)" || exit 0; \
+ list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+ echo " rm -f" $$list; \
+ rm -f $$list
+auditfilterd$(EXEEXT): $(auditfilterd_OBJECTS) $(auditfilterd_DEPENDENCIES) $(EXTRA_auditfilterd_DEPENDENCIES)
@rm -f auditfilterd$(EXEEXT)
$(LINK) $(auditfilterd_OBJECTS) $(auditfilterd_LDADD) $(LIBS)
@@ -265,7 +341,7 @@
.c.o:
@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
- at am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+ at am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(COMPILE) -c $<
@@ -272,7 +348,7 @@
.c.obj:
@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
- at am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+ at am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
@@ -279,7 +355,7 @@
.c.lo:
@am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
- at am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+ at am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $<
@@ -289,51 +365,47 @@
clean-libtool:
-rm -rf .libs _libs
-install-man8: $(man8_MANS) $(man_MANS)
+install-man8: $(man8_MANS)
@$(NORMAL_INSTALL)
- test -z "$(man8dir)" || $(MKDIR_P) "$(DESTDIR)$(man8dir)"
- @list='$(man8_MANS) $(dist_man8_MANS) $(nodist_man8_MANS)'; \
- l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
- for i in $$l2; do \
- case "$$i" in \
- *.8*) list="$$list $$i" ;; \
- esac; \
+ @list1='$(man8_MANS)'; \
+ list2=''; \
+ test -n "$(man8dir)" \
+ && test -n "`echo $$list1$$list2`" \
+ || exit 0; \
+ echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
+ { for i in $$list1; do echo "$$i"; done; \
+ if test -n "$$list2"; then \
+ for i in $$list2; do echo "$$i"; done \
+ | sed -n '/\.8[a-z]*$$/p'; \
+ fi; \
+ } | while read p; do \
+ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; echo "$$p"; \
+ done | \
+ sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+ sed 'N;N;s,\n, ,g' | { \
+ list=; while read file base inst; do \
+ if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
+ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
+ fi; \
done; \
- for i in $$list; do \
- if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
- else file=$$i; fi; \
- ext=`echo $$i | sed -e 's/^.*\\.//'`; \
- case "$$ext" in \
- 8*) ;; \
- *) ext='8' ;; \
- esac; \
- inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
- inst=`echo $$inst | sed -e 's/^.*\///'`; \
- inst=`echo $$inst | sed '$(transform)'`.$$ext; \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst"; \
- done
+ for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+ while read files; do \
+ test -z "$$files" || { \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
+ done; }
+
uninstall-man8:
@$(NORMAL_UNINSTALL)
- @list='$(man8_MANS) $(dist_man8_MANS) $(nodist_man8_MANS)'; \
- l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
- for i in $$l2; do \
- case "$$i" in \
- *.8*) list="$$list $$i" ;; \
- esac; \
- done; \
- for i in $$list; do \
- ext=`echo $$i | sed -e 's/^.*\\.//'`; \
- case "$$ext" in \
- 8*) ;; \
- *) ext='8' ;; \
- esac; \
- inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
- inst=`echo $$inst | sed -e 's/^.*\///'`; \
- inst=`echo $$inst | sed '$(transform)'`.$$ext; \
- echo " rm -f '$(DESTDIR)$(man8dir)/$$inst'"; \
- rm -f "$(DESTDIR)$(man8dir)/$$inst"; \
- done
+ @list='$(man8_MANS)'; test -n "$(man8dir)" || exit 0; \
+ files=`{ for i in $$list; do echo "$$i"; done; \
+ } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+ dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
@@ -340,7 +412,7 @@
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
- $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
mkid -fID $$unique
tags: TAGS
@@ -347,7 +419,7 @@
TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
- tags=; \
+ set x; \
here=`pwd`; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
@@ -355,15 +427,20 @@
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ shift; \
+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$tags $$unique; \
+ if test $$# -gt 0; then \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ "$$@" $$unique; \
+ else \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$unique; \
+ fi; \
fi
ctags: CTAGS
CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
- tags=; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
@@ -370,19 +447,46 @@
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
- test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$tags $$unique
+ $$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
- && cd $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) $$here
+ && $(am__cd) $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: $(HEADERS) $(SOURCES) $(LISP)
+ list='$(SOURCES) $(HEADERS) $(LISP)'; \
+ case "$(srcdir)" in \
+ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+ *) sdir=$(subdir)/$(srcdir) ;; \
+ esac; \
+ for i in $$list; do \
+ if test -f "$$i"; then \
+ echo "$(subdir)/$$i"; \
+ else \
+ echo "$$sdir/$$i"; \
+ fi; \
+ done >> $(top_builddir)/cscope.files
+
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
distdir: $(DISTFILES)
+ @list='$(MANS)'; if test -n "$$list"; then \
+ list=`for p in $$list; do \
+ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+ if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
+ if test -n "$$list" && \
+ grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
+ echo "error: found man pages containing the 'missing help2man' replacement text:" >&2; \
+ grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \
+ echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \
+ echo " typically 'make maintainer-clean' will remove them" >&2; \
+ exit 1; \
+ else :; fi; \
+ else :; fi
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
@@ -398,13 +502,17 @@
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
@@ -425,10 +533,15 @@
installcheck: installcheck-am
install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+ if test -z '$(STRIP)'; then \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ install; \
+ else \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+ fi
mostlyclean-generic:
clean-generic:
@@ -435,6 +548,7 @@
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@@ -456,6 +570,8 @@
html: html-am
+html-am:
+
info: info-am
info-am:
@@ -464,18 +580,28 @@
install-dvi: install-dvi-am
+install-dvi-am:
+
install-exec-am: install-sbinPROGRAMS
install-html: install-html-am
+install-html-am:
+
install-info: install-info-am
+install-info-am:
+
install-man: install-man8
install-pdf: install-pdf-am
+install-pdf-am:
+
install-ps: install-ps-am
+install-ps-am:
+
installcheck-am:
maintainer-clean: maintainer-clean-am
@@ -503,7 +629,7 @@
.MAKE: install-am install-strip
.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
- clean-libtool clean-sbinPROGRAMS ctags distclean \
+ clean-libtool clean-sbinPROGRAMS cscopelist ctags distclean \
distclean-compile distclean-generic distclean-libtool \
distclean-tags distdir dvi dvi-am html html-am info info-am \
install install-am install-data install-data-am install-dvi \
@@ -517,6 +643,7 @@
tags uninstall uninstall-am uninstall-man uninstall-man8 \
uninstall-sbinPROGRAMS
+
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
Modified: trunk/contrib/openbsm/bin/auditreduce/Makefile.am
===================================================================
--- trunk/contrib/openbsm/bin/auditreduce/Makefile.am 2016-09-18 22:43:06 UTC (rev 8504)
+++ trunk/contrib/openbsm/bin/auditreduce/Makefile.am 2016-09-18 22:45:22 UTC (rev 8505)
@@ -1,6 +1,6 @@
-#
-# $P4: //depot/projects/trustedbsd/openbsm/bin/auditreduce/Makefile.am#3 $
-#
+##
+## $P4: //depot/projects/trustedbsd/openbsm/bin/auditreduce/Makefile.am#4 $
+##
if USE_NATIVE_INCLUDES
INCLUDES = -I$(top_builddir) -I$(top_srcdir)
Modified: trunk/contrib/openbsm/bin/auditreduce/Makefile.in
===================================================================
--- trunk/contrib/openbsm/bin/auditreduce/Makefile.in 2016-09-18 22:43:06 UTC (rev 8504)
+++ trunk/contrib/openbsm/bin/auditreduce/Makefile.in 2016-09-18 22:45:22 UTC (rev 8505)
@@ -1,8 +1,8 @@
-# Makefile.in generated by automake 1.10.1 from Makefile.am.
+# Makefile.in generated by automake 1.12.2 from Makefile.am.
# @configure_input@
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+# Copyright (C) 1994-2012 Free Software Foundation, Inc.
+
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@@ -14,14 +14,28 @@
@SET_MAKE@
-#
-# $P4: //depot/projects/trustedbsd/openbsm/bin/auditreduce/Makefile.in#10 $
-#
-
VPATH = @srcdir@
+am__make_dryrun = \
+ { \
+ am__dry=no; \
+ case $$MAKEFLAGS in \
+ *\\[\ \ ]*) \
+ echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
+ | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+ *) \
+ for am__flg in $$MAKEFLAGS; do \
+ case $$am__flg in \
+ *=*|--*) ;; \
+ *n*) am__dry=yes; break;; \
+ esac; \
+ done;; \
+ esac; \
+ test $$am__dry = yes; \
+ }
pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
@@ -38,7 +52,8 @@
host_triplet = @host@
sbin_PROGRAMS = auditreduce$(EXEEXT)
subdir = bin/auditreduce
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
+ $(top_srcdir)/config/depcomp
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
@@ -46,8 +61,8 @@
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/config/config.h
CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man1dir)"
-sbinPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
PROGRAMS = $(sbin_PROGRAMS)
am_auditreduce_OBJECTS = auditreduce.$(OBJEXT)
auditreduce_OBJECTS = $(am_auditreduce_OBJECTS)
@@ -55,6 +70,7 @@
DEFAULT_INCLUDES = -I. at am__isrc@ -I$(top_builddir)/config
depcomp = $(SHELL) $(top_srcdir)/config/depcomp
am__depfiles_maybe = depfiles
+am__mv = mv -f
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
@@ -66,6 +82,38 @@
$(LDFLAGS) -o $@
SOURCES = $(auditreduce_SOURCES)
DIST_SOURCES = $(auditreduce_SOURCES)
+am__can_run_installinfo = \
+ case $$AM_UPDATE_INFO_DIR in \
+ n|no|NO) false;; \
+ *) (install-info --version) >/dev/null 2>&1;; \
+ esac
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+ *) f=$$p;; \
+ esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+ if (++n[$$2] == $(am__install_max)) \
+ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+ END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+ test -z "$$files" \
+ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+ $(am__cd) "$$dir" && rm -f $$files; }; \
+ }
man1dir = $(mandir)/man1
NROFF = nroff
MANS = $(man1_MANS)
@@ -84,22 +132,18 @@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
DSYMUTIL = @DSYMUTIL@
-ECHO = @ECHO@
+DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
-F77 = @F77@
-FFLAGS = @FFLAGS@
+FGREP = @FGREP@
GREP = @GREP@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
@@ -106,23 +150,34 @@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
LDFLAGS = @LDFLAGS@
+LEX = @LEX@
+LEXLIB = @LEXLIB@
+LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
MIG = @MIG@
MKDIR_P = @MKDIR_P@
+NM = @NM@
NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
RANLIB = @RANLIB@
@@ -131,13 +186,15 @@
SHELL = @SHELL@
STRIP = @STRIP@
VERSION = @VERSION@
+YACC = @YACC@
+YFLAGS = @YFLAGS@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
@@ -196,14 +253,14 @@
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
- && exit 0; \
+ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+ && { if test -f $@; then exit 0; else break; fi; }; \
exit 1;; \
esac; \
done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign bin/auditreduce/Makefile'; \
- cd $(top_srcdir) && \
- $(AUTOMAKE) --foreign bin/auditreduce/Makefile
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign bin/auditreduce/Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --foreign bin/auditreduce/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
@@ -221,35 +278,54 @@
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
install-sbinPROGRAMS: $(sbin_PROGRAMS)
@$(NORMAL_INSTALL)
- test -z "$(sbindir)" || $(MKDIR_P) "$(DESTDIR)$(sbindir)"
- @list='$(sbin_PROGRAMS)'; for p in $$list; do \
- p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
- if test -f $$p \
- || test -f $$p1 \
- ; then \
- f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
- echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(sbinPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(sbindir)/$$f'"; \
- $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(sbinPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(sbindir)/$$f" || exit 1; \
- else :; fi; \
- done
+ @list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \
+ if test -n "$$list"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
+ fi; \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed 's/$(EXEEXT)$$//' | \
+ while read p p1; do if test -f $$p || test -f $$p1; \
+ then echo "$$p"; echo "$$p"; else :; fi; \
+ done | \
+ sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
+ -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+ sed 'N;N;N;s,\n, ,g' | \
+ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+ if ($$2 == $$4) files[d] = files[d] " " $$1; \
+ else { print "f", $$3 "/" $$4, $$1; } } \
+ END { for (d in files) print "f", d, files[d] }' | \
+ while read type dir files; do \
+ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+ test -z "$$files" || { \
+ echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
+ $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
+ } \
+ ; done
uninstall-sbinPROGRAMS:
@$(NORMAL_UNINSTALL)
- @list='$(sbin_PROGRAMS)'; for p in $$list; do \
- f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
- echo " rm -f '$(DESTDIR)$(sbindir)/$$f'"; \
- rm -f "$(DESTDIR)$(sbindir)/$$f"; \
- done
+ @list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \
+ files=`for p in $$list; do echo "$$p"; done | \
+ sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+ -e 's/$$/$(EXEEXT)/' `; \
+ test -n "$$list" || exit 0; \
+ echo " ( cd '$(DESTDIR)$(sbindir)' && rm -f" $$files ")"; \
+ cd "$(DESTDIR)$(sbindir)" && rm -f $$files
clean-sbinPROGRAMS:
- @list='$(sbin_PROGRAMS)'; for p in $$list; do \
- f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
- echo " rm -f $$p $$f"; \
- rm -f $$p $$f ; \
- done
-auditreduce$(EXEEXT): $(auditreduce_OBJECTS) $(auditreduce_DEPENDENCIES)
+ @list='$(sbin_PROGRAMS)'; test -n "$$list" || exit 0; \
+ echo " rm -f" $$list; \
+ rm -f $$list || exit $$?; \
+ test -n "$(EXEEXT)" || exit 0; \
+ list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+ echo " rm -f" $$list; \
+ rm -f $$list
+auditreduce$(EXEEXT): $(auditreduce_OBJECTS) $(auditreduce_DEPENDENCIES) $(EXTRA_auditreduce_DEPENDENCIES)
@rm -f auditreduce$(EXEEXT)
$(LINK) $(auditreduce_OBJECTS) $(auditreduce_LDADD) $(LIBS)
@@ -263,7 +339,7 @@
.c.o:
@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
- at am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+ at am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(COMPILE) -c $<
@@ -270,7 +346,7 @@
.c.obj:
@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
- at am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+ at am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
@@ -277,7 +353,7 @@
.c.lo:
@am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
- at am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+ at am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $<
@@ -287,51 +363,47 @@
clean-libtool:
-rm -rf .libs _libs
-install-man1: $(man1_MANS) $(man_MANS)
+install-man1: $(man1_MANS)
@$(NORMAL_INSTALL)
- test -z "$(man1dir)" || $(MKDIR_P) "$(DESTDIR)$(man1dir)"
- @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
- l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
- for i in $$l2; do \
- case "$$i" in \
- *.1*) list="$$list $$i" ;; \
- esac; \
+ @list1='$(man1_MANS)'; \
+ list2=''; \
+ test -n "$(man1dir)" \
+ && test -n "`echo $$list1$$list2`" \
+ || exit 0; \
+ echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
+ { for i in $$list1; do echo "$$i"; done; \
+ if test -n "$$list2"; then \
+ for i in $$list2; do echo "$$i"; done \
+ | sed -n '/\.1[a-z]*$$/p'; \
+ fi; \
+ } | while read p; do \
+ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; echo "$$p"; \
+ done | \
+ sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+ sed 'N;N;s,\n, ,g' | { \
+ list=; while read file base inst; do \
+ if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
+ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
+ fi; \
done; \
- for i in $$list; do \
- if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
- else file=$$i; fi; \
- ext=`echo $$i | sed -e 's/^.*\\.//'`; \
- case "$$ext" in \
- 1*) ;; \
- *) ext='1' ;; \
- esac; \
- inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
- inst=`echo $$inst | sed -e 's/^.*\///'`; \
- inst=`echo $$inst | sed '$(transform)'`.$$ext; \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst"; \
- done
+ for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+ while read files; do \
+ test -z "$$files" || { \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
+ done; }
+
uninstall-man1:
@$(NORMAL_UNINSTALL)
- @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
- l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
- for i in $$l2; do \
- case "$$i" in \
- *.1*) list="$$list $$i" ;; \
- esac; \
- done; \
- for i in $$list; do \
- ext=`echo $$i | sed -e 's/^.*\\.//'`; \
- case "$$ext" in \
- 1*) ;; \
- *) ext='1' ;; \
- esac; \
- inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
- inst=`echo $$inst | sed -e 's/^.*\///'`; \
- inst=`echo $$inst | sed '$(transform)'`.$$ext; \
- echo " rm -f '$(DESTDIR)$(man1dir)/$$inst'"; \
- rm -f "$(DESTDIR)$(man1dir)/$$inst"; \
- done
+ @list='$(man1_MANS)'; test -n "$(man1dir)" || exit 0; \
+ files=`{ for i in $$list; do echo "$$i"; done; \
+ } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+ dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
@@ -338,7 +410,7 @@
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
- $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
mkid -fID $$unique
tags: TAGS
@@ -345,7 +417,7 @@
TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
- tags=; \
+ set x; \
here=`pwd`; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
@@ -353,15 +425,20 @@
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ shift; \
+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$tags $$unique; \
+ if test $$# -gt 0; then \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ "$$@" $$unique; \
+ else \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$unique; \
+ fi; \
fi
ctags: CTAGS
CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
- tags=; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
@@ -368,19 +445,46 @@
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
- test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$tags $$unique
+ $$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
- && cd $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) $$here
+ && $(am__cd) $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: $(HEADERS) $(SOURCES) $(LISP)
+ list='$(SOURCES) $(HEADERS) $(LISP)'; \
+ case "$(srcdir)" in \
+ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+ *) sdir=$(subdir)/$(srcdir) ;; \
+ esac; \
+ for i in $$list; do \
+ if test -f "$$i"; then \
+ echo "$(subdir)/$$i"; \
+ else \
+ echo "$$sdir/$$i"; \
+ fi; \
+ done >> $(top_builddir)/cscope.files
+
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
distdir: $(DISTFILES)
+ @list='$(MANS)'; if test -n "$$list"; then \
+ list=`for p in $$list; do \
+ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+ if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
+ if test -n "$$list" && \
+ grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
+ echo "error: found man pages containing the 'missing help2man' replacement text:" >&2; \
+ grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \
+ echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \
+ echo " typically 'make maintainer-clean' will remove them" >&2; \
+ exit 1; \
+ else :; fi; \
+ else :; fi
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
@@ -396,13 +500,17 @@
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
@@ -423,10 +531,15 @@
installcheck: installcheck-am
install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+ if test -z '$(STRIP)'; then \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ install; \
+ else \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+ fi
mostlyclean-generic:
clean-generic:
@@ -433,6 +546,7 @@
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@@ -454,6 +568,8 @@
html: html-am
+html-am:
+
info: info-am
info-am:
@@ -462,18 +578,28 @@
install-dvi: install-dvi-am
+install-dvi-am:
+
install-exec-am: install-sbinPROGRAMS
install-html: install-html-am
+install-html-am:
+
install-info: install-info-am
+install-info-am:
+
install-man: install-man1
install-pdf: install-pdf-am
+install-pdf-am:
+
install-ps: install-ps-am
+install-ps-am:
+
installcheck-am:
maintainer-clean: maintainer-clean-am
@@ -501,7 +627,7 @@
.MAKE: install-am install-strip
.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
- clean-libtool clean-sbinPROGRAMS ctags distclean \
+ clean-libtool clean-sbinPROGRAMS cscopelist ctags distclean \
distclean-compile distclean-generic distclean-libtool \
distclean-tags distdir dvi dvi-am html html-am info info-am \
install install-am install-data install-data-am install-dvi \
@@ -515,6 +641,7 @@
tags uninstall uninstall-am uninstall-man uninstall-man1 \
uninstall-sbinPROGRAMS
+
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
Modified: trunk/contrib/openbsm/bin/auditreduce/auditreduce.1
===================================================================
--- trunk/contrib/openbsm/bin/auditreduce/auditreduce.1 2016-09-18 22:43:06 UTC (rev 8504)
+++ trunk/contrib/openbsm/bin/auditreduce/auditreduce.1 2016-09-18 22:45:22 UTC (rev 8505)
@@ -25,7 +25,7 @@
.\" IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
.\" POSSIBILITY OF SUCH DAMAGE.
.\"
-.\" $P4: //depot/projects/trustedbsd/openbsm/bin/auditreduce/auditreduce.1#17 $
+.\" $P4: //depot/projects/trustedbsd/openbsm/bin/auditreduce/auditreduce.1#18 $
.\"
.Dd January 24, 2004
.Dt AUDITREDUCE 1
@@ -92,7 +92,7 @@
.It Fl g Ar rgid
Select records with the given real group ID or name.
.It Fl j Ar id
-Select records having a subject token with matching ID.
+Select records having a subject token with matching ID, where ID is a process ID.
.It Fl m Ar event
Select records with the given event name or number. This option can
be used more then once to select records of multiple event types.
Modified: trunk/contrib/openbsm/bin/praudit/Makefile.am
===================================================================
--- trunk/contrib/openbsm/bin/praudit/Makefile.am 2016-09-18 22:43:06 UTC (rev 8504)
+++ trunk/contrib/openbsm/bin/praudit/Makefile.am 2016-09-18 22:45:22 UTC (rev 8505)
@@ -1,6 +1,6 @@
-#
-# $P4: //depot/projects/trustedbsd/openbsm/bin/praudit/Makefile.am#3 $
-#
+##
+## $P4: //depot/projects/trustedbsd/openbsm/bin/praudit/Makefile.am#4 $
+##
if USE_NATIVE_INCLUDES
INCLUDES = -I$(top_builddir) -I$(top_srcdir)
Modified: trunk/contrib/openbsm/bin/praudit/Makefile.in
===================================================================
--- trunk/contrib/openbsm/bin/praudit/Makefile.in 2016-09-18 22:43:06 UTC (rev 8504)
+++ trunk/contrib/openbsm/bin/praudit/Makefile.in 2016-09-18 22:45:22 UTC (rev 8505)
@@ -1,8 +1,8 @@
-# Makefile.in generated by automake 1.10.1 from Makefile.am.
+# Makefile.in generated by automake 1.12.2 from Makefile.am.
# @configure_input@
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+# Copyright (C) 1994-2012 Free Software Foundation, Inc.
+
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@@ -14,14 +14,28 @@
@SET_MAKE@
-#
-# $P4: //depot/projects/trustedbsd/openbsm/bin/praudit/Makefile.in#10 $
-#
-
VPATH = @srcdir@
+am__make_dryrun = \
+ { \
+ am__dry=no; \
+ case $$MAKEFLAGS in \
+ *\\[\ \ ]*) \
+ echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
+ | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+ *) \
+ for am__flg in $$MAKEFLAGS; do \
+ case $$am__flg in \
+ *=*|--*) ;; \
+ *n*) am__dry=yes; break;; \
+ esac; \
+ done;; \
+ esac; \
+ test $$am__dry = yes; \
+ }
pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
@@ -38,7 +52,8 @@
host_triplet = @host@
sbin_PROGRAMS = praudit$(EXEEXT)
subdir = bin/praudit
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
+ $(top_srcdir)/config/depcomp
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
@@ -46,8 +61,8 @@
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/config/config.h
CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man1dir)"
-sbinPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
PROGRAMS = $(sbin_PROGRAMS)
am_praudit_OBJECTS = praudit.$(OBJEXT)
praudit_OBJECTS = $(am_praudit_OBJECTS)
@@ -55,6 +70,7 @@
DEFAULT_INCLUDES = -I. at am__isrc@ -I$(top_builddir)/config
depcomp = $(SHELL) $(top_srcdir)/config/depcomp
am__depfiles_maybe = depfiles
+am__mv = mv -f
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
@@ -66,6 +82,38 @@
$(LDFLAGS) -o $@
SOURCES = $(praudit_SOURCES)
DIST_SOURCES = $(praudit_SOURCES)
+am__can_run_installinfo = \
+ case $$AM_UPDATE_INFO_DIR in \
+ n|no|NO) false;; \
+ *) (install-info --version) >/dev/null 2>&1;; \
+ esac
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+ *) f=$$p;; \
+ esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+ if (++n[$$2] == $(am__install_max)) \
+ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+ END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+ test -z "$$files" \
+ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+ $(am__cd) "$$dir" && rm -f $$files; }; \
+ }
man1dir = $(mandir)/man1
NROFF = nroff
MANS = $(man1_MANS)
@@ -84,22 +132,18 @@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
DSYMUTIL = @DSYMUTIL@
-ECHO = @ECHO@
+DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
-F77 = @F77@
-FFLAGS = @FFLAGS@
+FGREP = @FGREP@
GREP = @GREP@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
@@ -106,23 +150,34 @@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
LDFLAGS = @LDFLAGS@
+LEX = @LEX@
+LEXLIB = @LEXLIB@
+LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
MIG = @MIG@
MKDIR_P = @MKDIR_P@
+NM = @NM@
NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
RANLIB = @RANLIB@
@@ -131,13 +186,15 @@
SHELL = @SHELL@
STRIP = @STRIP@
VERSION = @VERSION@
+YACC = @YACC@
+YFLAGS = @YFLAGS@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
@@ -196,14 +253,14 @@
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
- && exit 0; \
+ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+ && { if test -f $@; then exit 0; else break; fi; }; \
exit 1;; \
esac; \
done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign bin/praudit/Makefile'; \
- cd $(top_srcdir) && \
- $(AUTOMAKE) --foreign bin/praudit/Makefile
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign bin/praudit/Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --foreign bin/praudit/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
@@ -221,35 +278,54 @@
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
install-sbinPROGRAMS: $(sbin_PROGRAMS)
@$(NORMAL_INSTALL)
- test -z "$(sbindir)" || $(MKDIR_P) "$(DESTDIR)$(sbindir)"
- @list='$(sbin_PROGRAMS)'; for p in $$list; do \
- p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
- if test -f $$p \
- || test -f $$p1 \
- ; then \
- f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
- echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(sbinPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(sbindir)/$$f'"; \
- $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(sbinPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(sbindir)/$$f" || exit 1; \
- else :; fi; \
- done
+ @list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \
+ if test -n "$$list"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
+ fi; \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed 's/$(EXEEXT)$$//' | \
+ while read p p1; do if test -f $$p || test -f $$p1; \
+ then echo "$$p"; echo "$$p"; else :; fi; \
+ done | \
+ sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
+ -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+ sed 'N;N;N;s,\n, ,g' | \
+ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+ if ($$2 == $$4) files[d] = files[d] " " $$1; \
+ else { print "f", $$3 "/" $$4, $$1; } } \
+ END { for (d in files) print "f", d, files[d] }' | \
+ while read type dir files; do \
+ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+ test -z "$$files" || { \
+ echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
+ $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
+ } \
+ ; done
uninstall-sbinPROGRAMS:
@$(NORMAL_UNINSTALL)
- @list='$(sbin_PROGRAMS)'; for p in $$list; do \
- f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
- echo " rm -f '$(DESTDIR)$(sbindir)/$$f'"; \
- rm -f "$(DESTDIR)$(sbindir)/$$f"; \
- done
+ @list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \
+ files=`for p in $$list; do echo "$$p"; done | \
+ sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+ -e 's/$$/$(EXEEXT)/' `; \
+ test -n "$$list" || exit 0; \
+ echo " ( cd '$(DESTDIR)$(sbindir)' && rm -f" $$files ")"; \
+ cd "$(DESTDIR)$(sbindir)" && rm -f $$files
clean-sbinPROGRAMS:
- @list='$(sbin_PROGRAMS)'; for p in $$list; do \
- f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
- echo " rm -f $$p $$f"; \
- rm -f $$p $$f ; \
- done
-praudit$(EXEEXT): $(praudit_OBJECTS) $(praudit_DEPENDENCIES)
+ @list='$(sbin_PROGRAMS)'; test -n "$$list" || exit 0; \
+ echo " rm -f" $$list; \
+ rm -f $$list || exit $$?; \
+ test -n "$(EXEEXT)" || exit 0; \
+ list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+ echo " rm -f" $$list; \
+ rm -f $$list
+praudit$(EXEEXT): $(praudit_OBJECTS) $(praudit_DEPENDENCIES) $(EXTRA_praudit_DEPENDENCIES)
@rm -f praudit$(EXEEXT)
$(LINK) $(praudit_OBJECTS) $(praudit_LDADD) $(LIBS)
@@ -263,7 +339,7 @@
.c.o:
@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
- at am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+ at am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(COMPILE) -c $<
@@ -270,7 +346,7 @@
.c.obj:
@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
- at am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+ at am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
@@ -277,7 +353,7 @@
.c.lo:
@am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
- at am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+ at am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $<
@@ -287,51 +363,47 @@
clean-libtool:
-rm -rf .libs _libs
-install-man1: $(man1_MANS) $(man_MANS)
+install-man1: $(man1_MANS)
@$(NORMAL_INSTALL)
- test -z "$(man1dir)" || $(MKDIR_P) "$(DESTDIR)$(man1dir)"
- @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
- l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
- for i in $$l2; do \
- case "$$i" in \
- *.1*) list="$$list $$i" ;; \
- esac; \
+ @list1='$(man1_MANS)'; \
+ list2=''; \
+ test -n "$(man1dir)" \
+ && test -n "`echo $$list1$$list2`" \
+ || exit 0; \
+ echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
+ { for i in $$list1; do echo "$$i"; done; \
+ if test -n "$$list2"; then \
+ for i in $$list2; do echo "$$i"; done \
+ | sed -n '/\.1[a-z]*$$/p'; \
+ fi; \
+ } | while read p; do \
+ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; echo "$$p"; \
+ done | \
+ sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+ sed 'N;N;s,\n, ,g' | { \
+ list=; while read file base inst; do \
+ if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
+ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
+ fi; \
done; \
- for i in $$list; do \
- if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
- else file=$$i; fi; \
- ext=`echo $$i | sed -e 's/^.*\\.//'`; \
- case "$$ext" in \
- 1*) ;; \
- *) ext='1' ;; \
- esac; \
- inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
- inst=`echo $$inst | sed -e 's/^.*\///'`; \
- inst=`echo $$inst | sed '$(transform)'`.$$ext; \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst"; \
- done
+ for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+ while read files; do \
+ test -z "$$files" || { \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
+ done; }
+
uninstall-man1:
@$(NORMAL_UNINSTALL)
- @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
- l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
- for i in $$l2; do \
- case "$$i" in \
- *.1*) list="$$list $$i" ;; \
- esac; \
- done; \
- for i in $$list; do \
- ext=`echo $$i | sed -e 's/^.*\\.//'`; \
- case "$$ext" in \
- 1*) ;; \
- *) ext='1' ;; \
- esac; \
- inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
- inst=`echo $$inst | sed -e 's/^.*\///'`; \
- inst=`echo $$inst | sed '$(transform)'`.$$ext; \
- echo " rm -f '$(DESTDIR)$(man1dir)/$$inst'"; \
- rm -f "$(DESTDIR)$(man1dir)/$$inst"; \
- done
+ @list='$(man1_MANS)'; test -n "$(man1dir)" || exit 0; \
+ files=`{ for i in $$list; do echo "$$i"; done; \
+ } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+ dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
@@ -338,7 +410,7 @@
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
- $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
mkid -fID $$unique
tags: TAGS
@@ -345,7 +417,7 @@
TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
- tags=; \
+ set x; \
here=`pwd`; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
@@ -353,15 +425,20 @@
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ shift; \
+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$tags $$unique; \
+ if test $$# -gt 0; then \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ "$$@" $$unique; \
+ else \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$unique; \
+ fi; \
fi
ctags: CTAGS
CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
- tags=; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
@@ -368,19 +445,46 @@
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
- test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$tags $$unique
+ $$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
- && cd $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) $$here
+ && $(am__cd) $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: $(HEADERS) $(SOURCES) $(LISP)
+ list='$(SOURCES) $(HEADERS) $(LISP)'; \
+ case "$(srcdir)" in \
+ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+ *) sdir=$(subdir)/$(srcdir) ;; \
+ esac; \
+ for i in $$list; do \
+ if test -f "$$i"; then \
+ echo "$(subdir)/$$i"; \
+ else \
+ echo "$$sdir/$$i"; \
+ fi; \
+ done >> $(top_builddir)/cscope.files
+
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
distdir: $(DISTFILES)
+ @list='$(MANS)'; if test -n "$$list"; then \
+ list=`for p in $$list; do \
+ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+ if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
+ if test -n "$$list" && \
+ grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
+ echo "error: found man pages containing the 'missing help2man' replacement text:" >&2; \
+ grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \
+ echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \
+ echo " typically 'make maintainer-clean' will remove them" >&2; \
+ exit 1; \
+ else :; fi; \
+ else :; fi
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
@@ -396,13 +500,17 @@
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
@@ -423,10 +531,15 @@
installcheck: installcheck-am
install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+ if test -z '$(STRIP)'; then \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ install; \
+ else \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+ fi
mostlyclean-generic:
clean-generic:
@@ -433,6 +546,7 @@
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@@ -454,6 +568,8 @@
html: html-am
+html-am:
+
info: info-am
info-am:
@@ -462,18 +578,28 @@
install-dvi: install-dvi-am
+install-dvi-am:
+
install-exec-am: install-sbinPROGRAMS
install-html: install-html-am
+install-html-am:
+
install-info: install-info-am
+install-info-am:
+
install-man: install-man1
install-pdf: install-pdf-am
+install-pdf-am:
+
install-ps: install-ps-am
+install-ps-am:
+
installcheck-am:
maintainer-clean: maintainer-clean-am
@@ -501,7 +627,7 @@
.MAKE: install-am install-strip
.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
- clean-libtool clean-sbinPROGRAMS ctags distclean \
+ clean-libtool clean-sbinPROGRAMS cscopelist ctags distclean \
distclean-compile distclean-generic distclean-libtool \
distclean-tags distdir dvi dvi-am html html-am info info-am \
install install-am install-data install-data-am install-dvi \
@@ -515,6 +641,7 @@
tags uninstall uninstall-am uninstall-man uninstall-man1 \
uninstall-sbinPROGRAMS
+
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
Modified: trunk/contrib/openbsm/bin/praudit/praudit.1
===================================================================
--- trunk/contrib/openbsm/bin/praudit/praudit.1 2016-09-18 22:43:06 UTC (rev 8504)
+++ trunk/contrib/openbsm/bin/praudit/praudit.1 2016-09-18 22:45:22 UTC (rev 8505)
@@ -1,4 +1,4 @@
-.\" Copyright (c) 2004 Apple Inc.
+.\" Copyright (c) 2004-2009 Apple Inc.
.\" All rights reserved.
.\"
.\" Redistribution and use in source and binary forms, with or without
@@ -25,9 +25,9 @@
.\" IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
.\" POSSIBILITY OF SUCH DAMAGE.
.\"
-.\" $P4: //depot/projects/trustedbsd/openbsm/bin/praudit/praudit.1#13 $
+.\" $P4: //depot/projects/trustedbsd/openbsm/bin/praudit/praudit.1#14 $
.\"
-.Dd November 5, 2006
+.Dd August 4, 2009
.Dt PRAUDIT 1
.Os
.Sh NAME
@@ -35,7 +35,7 @@
.Nd "print the contents of audit trail files"
.Sh SYNOPSIS
.Nm
-.Op Fl lpx
+.Op Fl lnpx
.Op Fl r | s
.Op Fl d Ar del
.Op Ar
@@ -58,6 +58,9 @@
Prints the entire record on the same line.
If this option is not specified,
every token is displayed on a different line.
+.It Fl n
+Do not convert user and group IDs to their names but leave in their
+numeric forms.
.It Fl p
Specify this option if input to
.Nm
Modified: trunk/contrib/openbsm/bin/praudit/praudit.c
===================================================================
--- trunk/contrib/openbsm/bin/praudit/praudit.c 2016-09-18 22:43:06 UTC (rev 8504)
+++ trunk/contrib/openbsm/bin/praudit/praudit.c 2016-09-18 22:45:22 UTC (rev 8505)
@@ -1,5 +1,5 @@
/*-
- * Copyright (c) 2004-2008 Apple Inc.
+ * Copyright (c) 2004-2009 Apple Inc.
* Copyright (c) 2006 Martin Voros
* All rights reserved.
*
@@ -11,7 +11,7 @@
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
- * 3. Neither the name of Apple Computer, Inc. ("Apple") nor the names of
+ * 3. Neither the name of Apple Inc. ("Apple") nor the names of
* its contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
@@ -27,7 +27,7 @@
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
- * $P4: //depot/projects/trustedbsd/openbsm/bin/praudit/praudit.c#14 $
+ * $P4: //depot/projects/trustedbsd/openbsm/bin/praudit/praudit.c#16 $
*/
/*
@@ -35,7 +35,7 @@
*/
/*
- * praudit [-lpx] [-r | -s] [-d del] [file ...]
+ * praudit [-lnpx] [-r | -s] [-d del] [file ...]
*/
#include <bsm/libbsm.h>
@@ -49,16 +49,14 @@
static char *del = ","; /* Default delimiter. */
static int oneline = 0;
-static int raw = 0;
-static int shortfrm = 0;
static int partial = 0;
-static int xml = 0;
+static int oflags = AU_OFLAG_NONE;
static void
usage(void)
{
- fprintf(stderr, "usage: praudit [-lpx] [-r | -s] [-d del] "
+ fprintf(stderr, "usage: praudit [-lnpx] [-r | -s] [-d del] "
"[file ...]\n");
exit(1);
}
@@ -91,15 +89,10 @@
if (-1 == au_fetch_tok(&tok, buf + bytesread,
reclen - bytesread))
break;
- if (xml)
- au_print_tok_xml(stdout, &tok, del, raw,
- shortfrm);
- else
- au_print_tok(stdout, &tok, del, raw,
- shortfrm);
+ au_print_flags_tok(stdout, &tok, del, oflags);
bytesread += tok.len;
if (oneline) {
- if (!xml)
+ if (!(oflags & AU_OFLAG_XML))
printf("%s", del);
} else
printf("\n");
@@ -119,7 +112,7 @@
int i;
FILE *fp;
- while ((ch = getopt(argc, argv, "d:lprsx")) != -1) {
+ while ((ch = getopt(argc, argv, "d:lnprsx")) != -1) {
switch(ch) {
case 'd':
del = optarg;
@@ -129,24 +122,28 @@
oneline = 1;
break;
+ case 'n':
+ oflags |= AU_OFLAG_NORESOLVE;
+ break;
+
case 'p':
partial = 1;
break;
case 'r':
- if (shortfrm)
+ if (oflags & AU_OFLAG_SHORT)
usage(); /* Exclusive from shortfrm. */
- raw = 1;
+ oflags |= AU_OFLAG_RAW;
break;
case 's':
- if (raw)
+ if (oflags & AU_OFLAG_RAW)
usage(); /* Exclusive from raw. */
- shortfrm = 1;
+ oflags |= AU_OFLAG_SHORT;
break;
case 'x':
- xml = 1;
+ oflags |= AU_OFLAG_XML;
break;
case '?':
@@ -155,7 +152,7 @@
}
}
- if (xml)
+ if (oflags & AU_OFLAG_XML)
au_print_xml_header(stdout);
/* For each of the files passed as arguments dump the contents. */
@@ -171,7 +168,7 @@
fclose(fp);
}
- if (xml)
+ if (oflags & AU_OFLAG_XML)
au_print_xml_footer(stdout);
return (1);
Modified: trunk/contrib/openbsm/bsm/Makefile.am
===================================================================
--- trunk/contrib/openbsm/bsm/Makefile.am 2016-09-18 22:43:06 UTC (rev 8504)
+++ trunk/contrib/openbsm/bsm/Makefile.am 2016-09-18 22:45:22 UTC (rev 8505)
@@ -1,6 +1,6 @@
-#
-# $P4: //depot/projects/trustedbsd/openbsm/bsm/Makefile.am#4 $
-#
+##
+## $P4: //depot/projects/trustedbsd/openbsm/bsm/Makefile.am#5 $
+##
openbsmdir = $(includedir)/bsm
Modified: trunk/contrib/openbsm/bsm/Makefile.in
===================================================================
--- trunk/contrib/openbsm/bsm/Makefile.in 2016-09-18 22:43:06 UTC (rev 8504)
+++ trunk/contrib/openbsm/bsm/Makefile.in 2016-09-18 22:45:22 UTC (rev 8505)
@@ -1,8 +1,8 @@
-# Makefile.in generated by automake 1.10.1 from Makefile.am.
+# Makefile.in generated by automake 1.12.2 from Makefile.am.
# @configure_input@
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+# Copyright (C) 1994-2012 Free Software Foundation, Inc.
+
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@@ -14,14 +14,28 @@
@SET_MAKE@
-#
-# $P4: //depot/projects/trustedbsd/openbsm/bsm/Makefile.in#10 $
-#
-
VPATH = @srcdir@
+am__make_dryrun = \
+ { \
+ am__dry=no; \
+ case $$MAKEFLAGS in \
+ *\\[\ \ ]*) \
+ echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
+ | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+ *) \
+ for am__flg in $$MAKEFLAGS; do \
+ case $$am__flg in \
+ *=*|--*) ;; \
+ *n*) am__dry=yes; break;; \
+ esac; \
+ done;; \
+ esac; \
+ test $$am__dry = yes; \
+ }
pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
@@ -46,16 +60,42 @@
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/config/config.h
CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
SOURCES =
DIST_SOURCES =
+am__can_run_installinfo = \
+ case $$AM_UPDATE_INFO_DIR in \
+ n|no|NO) false;; \
+ *) (install-info --version) >/dev/null 2>&1;; \
+ esac
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
$(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
*) f=$$p;; \
esac;
-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+ if (++n[$$2] == $(am__install_max)) \
+ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+ END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+ test -z "$$files" \
+ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+ $(am__cd) "$$dir" && rm -f $$files; }; \
+ }
am__installdirs = "$(DESTDIR)$(openbsmdir)"
-openbsmHEADERS_INSTALL = $(INSTALL_HEADER)
HEADERS = $(openbsm_HEADERS)
ETAGS = etags
CTAGS = ctags
@@ -72,22 +112,18 @@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
DSYMUTIL = @DSYMUTIL@
-ECHO = @ECHO@
+DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
-F77 = @F77@
-FFLAGS = @FFLAGS@
+FGREP = @FGREP@
GREP = @GREP@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
@@ -94,23 +130,34 @@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
LDFLAGS = @LDFLAGS@
+LEX = @LEX@
+LEXLIB = @LEXLIB@
+LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
MIG = @MIG@
MKDIR_P = @MKDIR_P@
+NM = @NM@
NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
RANLIB = @RANLIB@
@@ -119,13 +166,15 @@
SHELL = @SHELL@
STRIP = @STRIP@
VERSION = @VERSION@
+YACC = @YACC@
+YFLAGS = @YFLAGS@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
@@ -185,14 +234,14 @@
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
- && exit 0; \
+ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+ && { if test -f $@; then exit 0; else break; fi; }; \
exit 1;; \
esac; \
done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign bsm/Makefile'; \
- cd $(top_srcdir) && \
- $(AUTOMAKE) --foreign bsm/Makefile
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign bsm/Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --foreign bsm/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
@@ -210,6 +259,7 @@
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
mostlyclean-libtool:
-rm -f *.lo
@@ -218,21 +268,25 @@
-rm -rf .libs _libs
install-openbsmHEADERS: $(openbsm_HEADERS)
@$(NORMAL_INSTALL)
- test -z "$(openbsmdir)" || $(MKDIR_P) "$(DESTDIR)$(openbsmdir)"
- @list='$(openbsm_HEADERS)'; for p in $$list; do \
+ @list='$(openbsm_HEADERS)'; test -n "$(openbsmdir)" || list=; \
+ if test -n "$$list"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(openbsmdir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(openbsmdir)" || exit 1; \
+ fi; \
+ for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- f=$(am__strip_dir) \
- echo " $(openbsmHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(openbsmdir)/$$f'"; \
- $(openbsmHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(openbsmdir)/$$f"; \
+ echo "$$d$$p"; \
+ done | $(am__base_list) | \
+ while read files; do \
+ echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(openbsmdir)'"; \
+ $(INSTALL_HEADER) $$files "$(DESTDIR)$(openbsmdir)" || exit $$?; \
done
uninstall-openbsmHEADERS:
@$(NORMAL_UNINSTALL)
- @list='$(openbsm_HEADERS)'; for p in $$list; do \
- f=$(am__strip_dir) \
- echo " rm -f '$(DESTDIR)$(openbsmdir)/$$f'"; \
- rm -f "$(DESTDIR)$(openbsmdir)/$$f"; \
- done
+ @list='$(openbsm_HEADERS)'; test -n "$(openbsmdir)" || list=; \
+ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+ dir='$(DESTDIR)$(openbsmdir)'; $(am__uninstall_files_from_dir)
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
@@ -239,7 +293,7 @@
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
- $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
mkid -fID $$unique
tags: TAGS
@@ -246,7 +300,7 @@
TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
- tags=; \
+ set x; \
here=`pwd`; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
@@ -254,15 +308,20 @@
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ shift; \
+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$tags $$unique; \
+ if test $$# -gt 0; then \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ "$$@" $$unique; \
+ else \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$unique; \
+ fi; \
fi
ctags: CTAGS
CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
- tags=; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
@@ -269,15 +328,29 @@
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
- test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$tags $$unique
+ $$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
- && cd $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) $$here
+ && $(am__cd) $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: $(HEADERS) $(SOURCES) $(LISP)
+ list='$(SOURCES) $(HEADERS) $(LISP)'; \
+ case "$(srcdir)" in \
+ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+ *) sdir=$(subdir)/$(srcdir) ;; \
+ esac; \
+ for i in $$list; do \
+ if test -f "$$i"; then \
+ echo "$(subdir)/$$i"; \
+ else \
+ echo "$$sdir/$$i"; \
+ fi; \
+ done >> $(top_builddir)/cscope.files
+
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -297,13 +370,17 @@
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
@@ -324,10 +401,15 @@
installcheck: installcheck-am
install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+ if test -z '$(STRIP)'; then \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ install; \
+ else \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+ fi
mostlyclean-generic:
clean-generic:
@@ -334,6 +416,7 @@
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@@ -352,6 +435,8 @@
html: html-am
+html-am:
+
info: info-am
info-am:
@@ -360,18 +445,28 @@
install-dvi: install-dvi-am
+install-dvi-am:
+
install-exec-am:
install-html: install-html-am
+install-html-am:
+
install-info: install-info-am
+install-info-am:
+
install-man:
install-pdf: install-pdf-am
+install-pdf-am:
+
install-ps: install-ps-am
+install-ps-am:
+
installcheck-am:
maintainer-clean: maintainer-clean-am
@@ -395,7 +490,7 @@
.MAKE: install-am install-strip
.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
- clean-libtool ctags distclean distclean-generic \
+ clean-libtool cscopelist ctags distclean distclean-generic \
distclean-libtool distclean-tags distdir dvi dvi-am html \
html-am info info-am install install-am install-data \
install-data-am install-dvi install-dvi-am install-exec \
@@ -407,6 +502,7 @@
mostlyclean-libtool pdf pdf-am ps ps-am tags uninstall \
uninstall-am uninstall-openbsmHEADERS
+
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
Modified: trunk/contrib/openbsm/bsm/auditd_lib.h
===================================================================
--- trunk/contrib/openbsm/bsm/auditd_lib.h 2016-09-18 22:43:06 UTC (rev 8504)
+++ trunk/contrib/openbsm/bsm/auditd_lib.h 2016-09-18 22:45:22 UTC (rev 8505)
@@ -26,7 +26,7 @@
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
- * $P4: //depot/projects/trustedbsd/openbsm/bsm/auditd_lib.h#4 $
+ * $P4: //depot/projects/trustedbsd/openbsm/bsm/auditd_lib.h#5 $
*/
#ifndef _BSM_AUDITD_LIB_H_
@@ -37,9 +37,10 @@
*/
#define NOT_TERMINATED "not_terminated"
#define CRASH_RECOVERY "crash_recovery"
-#define POSTFIX_LEN (sizeof("YYYYMMDDhhmmss") - 1)
-#define FILENAME_LEN ((2 * POSTFIX_LEN) + 2)
-#define TIMESTAMP_LEN (POSTFIX_LEN + 1)
+#define PREFIX_LEN (sizeof("YYYYMMDDhhmmss") - 1)
+#define POSTFIX_LEN PREFIX_LEN
+#define FILENAME_LEN (PREFIX_LEN + 1 + POSTFIX_LEN)
+#define TIMESTAMP_LEN POSTFIX_LEN
/*
* Macro to generate the timestamp string for trail file.
@@ -91,6 +92,7 @@
int auditd_expire_trails(int (*warn_expired)(char *));
int auditd_read_dirs(int (*warn_soft)(char *), int (*warn_hard)(char *));
void auditd_close_dirs(void);
+int auditd_set_dist(void);
int auditd_set_evcmap(void);
int auditd_set_namask(void);
int auditd_set_policy(void);
@@ -101,6 +103,7 @@
int auditd_prevent_audit(void);
int auditd_gen_record(int event, char *path);
int auditd_new_curlink(char *curfile);
+int auditd_rename(const char *fromname, const char *toname);
int audit_quick_start(void);
int audit_quick_stop(void);
Modified: trunk/contrib/openbsm/bsm/libbsm.h
===================================================================
--- trunk/contrib/openbsm/bsm/libbsm.h 2016-09-18 22:43:06 UTC (rev 8504)
+++ trunk/contrib/openbsm/bsm/libbsm.h 2016-09-18 22:45:22 UTC (rev 8505)
@@ -26,7 +26,7 @@
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
- * $P4: //depot/projects/trustedbsd/openbsm/bsm/libbsm.h#45 $
+ * $P4: //depot/projects/trustedbsd/openbsm/bsm/libbsm.h#50 $
*/
#ifndef _LIBBSM_H_
@@ -77,12 +77,13 @@
#define AUDIT_USER_FILE "/etc/security/audit_user"
#define DIR_CONTROL_ENTRY "dir"
-#define MINFREE_CONTROL_ENTRY "minfree"
+#define DIST_CONTROL_ENTRY "dist"
#define FILESZ_CONTROL_ENTRY "filesz"
#define FLAGS_CONTROL_ENTRY "flags"
+#define HOST_CONTROL_ENTRY "host"
+#define MINFREE_CONTROL_ENTRY "minfree"
#define NA_CONTROL_ENTRY "naflags"
#define POLICY_CONTROL_ENTRY "policy"
-#define AUDIT_HOST_CONTROL_ENTRY "host"
#define EXPIRE_AFTER_CONTROL_ENTRY "expire-after"
#define AU_CLASS_NAME_MAX 8
@@ -100,6 +101,15 @@
#define AU_TO_NO_WRITE 0 /* Abandon audit record. */
#define AU_TO_WRITE 1 /* Commit audit record. */
+/*
+ * Output format flags for au_print_flags_tok().
+ */
+#define AU_OFLAG_NONE 0x0000 /* Default form. */
+#define AU_OFLAG_RAW 0x0001 /* Raw, numeric form. */
+#define AU_OFLAG_SHORT 0x0002 /* Short form. */
+#define AU_OFLAG_XML 0x0004 /* XML form. */
+#define AU_OFLAG_NORESOLVE 0x0008 /* No user/group name resolution. */
+
__BEGIN_DECLS
struct au_event_ent {
au_event_t ae_number;
@@ -215,7 +225,7 @@
*/
typedef struct {
u_int32_t mode;
- u_int32_t uid;
+ u_int32_t uid;
u_int32_t gid;
u_int32_t fsid;
u_int64_t nid;
@@ -224,7 +234,7 @@
typedef struct {
u_int32_t mode;
- u_int32_t uid;
+ u_int32_t uid;
u_int32_t gid;
u_int32_t fsid;
u_int64_t nid;
@@ -662,6 +672,31 @@
} au_text_t;
/*
+ * upriv status 1 byte
+ * privstr len 2 bytes
+ * privstr N bytes + 1 (\0 byte)
+ */
+typedef struct {
+ u_int8_t sorf;
+ u_int16_t privstrlen;
+ char *priv;
+} au_priv_t;
+
+/*
+* privset
+* privtstrlen 2 bytes
+* privtstr N Bytes + 1
+* privstrlen 2 bytes
+* privstr N Bytes + 1
+*/
+typedef struct {
+ u_int16_t privtstrlen;
+ char *privtstr;
+ u_int16_t privstrlen;
+ char *privstr;
+} au_privset_t;
+
+/*
* zonename length 2 bytes
* zonename text N bytes + 1 NULL terminator
*/
@@ -739,6 +774,8 @@
au_invalid_t invalid;
au_trailer_t trail;
au_zonename_t zonename;
+ au_priv_t priv;
+ au_privset_t privset;
} tt; /* The token is one of the above types */
};
@@ -767,13 +804,14 @@
void setac(void);
void endac(void);
int getacdir(char *name, int len);
-int getacmin(int *min_val);
+int getacdist(void);
+int getacexpire(int *andflg, time_t *age, size_t *size);
int getacfilesz(size_t *size_val);
int getacflg(char *auditstr, int len);
+int getachost(char *auditstr, size_t len);
+int getacmin(int *min_val);
int getacna(char *auditstr, int len);
int getacpol(char *auditstr, size_t len);
-int getachost(char *auditstr, size_t len);
-int getacexpire(int *andflg, time_t *age, size_t *size);
int getauditflagsbin(char *auditstr, au_mask_t *masks);
int getauditflagschar(char *auditstr, au_mask_t *masks,
int verbose);
@@ -821,6 +859,8 @@
//XXX The following interface has different prototype from BSM
void au_print_tok(FILE *outfp, tokenstr_t *tok,
char *del, char raw, char sfrm);
+void au_print_flags_tok(FILE *outfp, tokenstr_t *tok,
+ char *del, int oflags);
void au_print_tok_xml(FILE *outfp, tokenstr_t *tok,
char *del, char raw, char sfrm);
@@ -842,7 +882,7 @@
int *local_socket_typep);
u_short au_domain_to_bsm(int local_domain);
u_char au_errno_to_bsm(int local_errno);
-u_short au_fcntl_cmd_to_bsm(int local_fcntl_command);
+u_short au_fcntl_cmd_to_bsm(int local_fcntl_command);
u_short au_socket_type_to_bsm(int local_socket_type);
const char *au_strerror(u_char bsm_error);
Modified: trunk/contrib/openbsm/compat/endian.h
===================================================================
--- trunk/contrib/openbsm/compat/endian.h 2016-09-18 22:43:06 UTC (rev 8504)
+++ trunk/contrib/openbsm/compat/endian.h 2016-09-18 22:45:22 UTC (rev 8505)
@@ -25,7 +25,7 @@
* SUCH DAMAGE.
*
* Derived from FreeBSD src/sys/sys/endian.h:1.6.
- * $P4: //depot/projects/trustedbsd/openbsm/compat/endian.h#8 $
+ * $P4: //depot/projects/trustedbsd/openbsm/compat/endian.h#10 $
*/
#ifndef _COMPAT_ENDIAN_H_
@@ -116,6 +116,8 @@
#define _LITTLE_ENDIAN LITTLE_ENDIAN
#endif
+/* XXX: Hack. */
+#ifndef htobe16
/*
* Host to big endian, host to little endian, big endian to host, and little
* endian to host byte order functions as detailed in byteorder(9).
@@ -149,113 +151,6 @@
#define le32toh(x) bswap32((x))
#define le64toh(x) bswap64((x))
#endif /* _BYTE_ORDER == _LITTLE_ENDIAN */
+#endif
-/* Alignment-agnostic encode/decode bytestream to/from little/big endian. */
-
-static __inline uint16_t
-be16dec(const void *pp)
-{
- unsigned char const *p = (unsigned char const *)pp;
-
- return ((p[0] << 8) | p[1]);
-}
-
-static __inline uint32_t
-be32dec(const void *pp)
-{
- unsigned char const *p = (unsigned char const *)pp;
-
- return ((p[0] << 24) | (p[1] << 16) | (p[2] << 8) | p[3]);
-}
-
-static __inline uint64_t
-be64dec(const void *pp)
-{
- unsigned char const *p = (unsigned char const *)pp;
-
- return (((uint64_t)be32dec(p) << 32) | be32dec(p + 4));
-}
-
-static __inline uint16_t
-le16dec(const void *pp)
-{
- unsigned char const *p = (unsigned char const *)pp;
-
- return ((p[1] << 8) | p[0]);
-}
-
-static __inline uint32_t
-le32dec(const void *pp)
-{
- unsigned char const *p = (unsigned char const *)pp;
-
- return ((p[3] << 24) | (p[2] << 16) | (p[1] << 8) | p[0]);
-}
-
-static __inline uint64_t
-le64dec(const void *pp)
-{
- unsigned char const *p = (unsigned char const *)pp;
-
- return (((uint64_t)le32dec(p + 4) << 32) | le32dec(p));
-}
-
-static __inline void
-be16enc(void *pp, uint16_t u)
-{
- unsigned char *p = (unsigned char *)pp;
-
- p[0] = (u >> 8) & 0xff;
- p[1] = u & 0xff;
-}
-
-static __inline void
-be32enc(void *pp, uint32_t u)
-{
- unsigned char *p = (unsigned char *)pp;
-
- p[0] = (u >> 24) & 0xff;
- p[1] = (u >> 16) & 0xff;
- p[2] = (u >> 8) & 0xff;
- p[3] = u & 0xff;
-}
-
-static __inline void
-be64enc(void *pp, uint64_t u)
-{
- unsigned char *p = (unsigned char *)pp;
-
- be32enc(p, u >> 32);
- be32enc(p + 4, u & 0xffffffff);
-}
-
-static __inline void
-le16enc(void *pp, uint16_t u)
-{
- unsigned char *p = (unsigned char *)pp;
-
- p[0] = u & 0xff;
- p[1] = (u >> 8) & 0xff;
-}
-
-static __inline void
-le32enc(void *pp, uint32_t u)
-{
- unsigned char *p = (unsigned char *)pp;
-
- p[0] = u & 0xff;
- p[1] = (u >> 8) & 0xff;
- p[2] = (u >> 16) & 0xff;
- p[3] = (u >> 24) & 0xff;
-}
-
-static __inline void
-le64enc(void *pp, uint64_t u)
-{
- unsigned char *p = (unsigned char *)pp;
-
- le32enc(p, u & 0xffffffff);
- le32enc(p + 4, u >> 32);
-}
-
#endif /* _COMPAT_ENDIAN_H_ */
Modified: trunk/contrib/openbsm/config/config.h
===================================================================
--- trunk/contrib/openbsm/config/config.h 2016-09-18 22:43:06 UTC (rev 8504)
+++ trunk/contrib/openbsm/config/config.h 2016-09-18 22:45:22 UTC (rev 8505)
@@ -4,15 +4,21 @@
/* Define to 1 if you have the `alarm' function. */
#define HAVE_ALARM 1
+/* Define to 1 if you have the `arc4random' function. */
+#define HAVE_ARC4RANDOM 1
+
+/* Define to 1 if you have the `arc4random_buf' function. */
+#define HAVE_ARC4RANDOM_BUF 1
+
/* Define if audit system calls present */
#define HAVE_AUDIT_SYSCALLS /**/
-/* Define if be32enc is present */
-#define HAVE_BE32ENC /**/
-
/* Define to 1 if you have the `bzero' function. */
#define HAVE_BZERO 1
+/* Define to 1 if you have the `cap_enter' function. */
+#define HAVE_CAP_ENTER 1
+
/* Define to 1 if your system has a working `chown' function. */
#define HAVE_CHOWN 1
@@ -19,6 +25,9 @@
/* Define to 1 if you have the `clock_gettime' function. */
#define HAVE_CLOCK_GETTIME 1
+/* Define to 1 if you have the `closefrom' function. */
+#define HAVE_CLOSEFROM 1
+
/* Define to 1 if you have the <dlfcn.h> header file. */
#define HAVE_DLFCN_H 1
@@ -25,9 +34,18 @@
/* Define to 1 if you have the <endian.h> header file. */
/* #undef HAVE_ENDIAN_H */
+/* Define to 1 if you have the `faccessat' function. */
+#define HAVE_FACCESSAT 1
+
+/* Define to 1 if you have the `fdopendir' function. */
+#define HAVE_FDOPENDIR 1
+
/* Define to 1 if you have the `fork' function. */
#define HAVE_FORK 1
+/* Define to 1 if you have the `fstatat' function. */
+#define HAVE_FSTATAT 1
+
/* Define to 1 if you have the `ftruncate' function. */
#define HAVE_FTRUNCATE 1
@@ -34,6 +52,12 @@
/* Define if queue.h includes LIST_FIRST */
#define HAVE_FULL_QUEUE_H /**/
+/* Define to 1 if you have the `getresgid' function. */
+#define HAVE_GETRESGID 1
+
+/* Define to 1 if you have the `getresuid' function. */
+#define HAVE_GETRESUID 1
+
/* Define to 1 if you have the `gettimeofday' function. */
#define HAVE_GETTIMEOFDAY 1
@@ -55,6 +79,12 @@
/* Define if ipc_perm.__seq instead of seq */
/* #undef HAVE_IPC_PERM___SEQ */
+/* Define to 1 if you have the `jail' function. */
+#define HAVE_JAIL 1
+
+/* Define to 1 if you have the `kqueue' function. */
+#define HAVE_KQUEUE 1
+
/* Define to 1 if you have the <machine/endian.h> header file. */
#define HAVE_MACHINE_ENDIAN_H 1
@@ -71,9 +101,37 @@
/* Define to 1 if you have the `memset' function. */
#define HAVE_MEMSET 1
+/* Define to 1 if you have the `openat' function. */
+#define HAVE_OPENAT 1
+
+/* Define to 1 if you have the <printf.h> header file. */
+#define HAVE_PRINTF_H 1
+
+/* Define to 1 if you have the `pthread_condattr_setclock' function. */
+#define HAVE_PTHREAD_CONDATTR_SETCLOCK 1
+
+/* Define to 1 if you have the `pthread_cond_timedwait_relative_np' function.
+ */
+/* #undef HAVE_PTHREAD_COND_TIMEDWAIT_RELATIVE_NP */
+
/* Define to 1 if you have the `pthread_mutex_lock' function. */
#define HAVE_PTHREAD_MUTEX_LOCK 1
+/* Define to 1 if you have the <pthread_np.h> header file. */
+#define HAVE_PTHREAD_NP_H 1
+
+/* Define to 1 if you have the `renameat' function. */
+#define HAVE_RENAMEAT 1
+
+/* Define to 1 if you have the `setproctitle' function. */
+#define HAVE_SETPROCTITLE 1
+
+/* Define to 1 if you have the `sigtimedwait' function. */
+#define HAVE_SIGTIMEDWAIT 1
+
+/* Define if sockaddr_storage.ss_len field exists */
+#define HAVE_SOCKADDR_STORAGE_SS_LEN /**/
+
/* Define to 1 if `stat' has the bug that it succeeds when given the
zero-length file name argument. */
/* #undef HAVE_STAT_EMPTY_STRING_BUG */
@@ -105,6 +163,9 @@
/* Define to 1 if you have the `strlcpy' function. */
#define HAVE_STRLCPY 1
+/* Define to 1 if you have the `strndup' function. */
+#define HAVE_STRNDUP 1
+
/* Define to 1 if you have the `strrchr' function. */
#define HAVE_STRRCHR 1
@@ -117,7 +178,7 @@
/* Define to 1 if you have the `strtoul' function. */
#define HAVE_STRTOUL 1
-/* Define to 1 if `st_rdev' is member of `struct stat'. */
+/* Define to 1 if `st_rdev' is a member of `struct stat'. */
#define HAVE_STRUCT_STAT_ST_RDEV 1
/* Define to 1 if you have the <sys/endian.h> header file. */
@@ -138,6 +199,9 @@
/* Define to 1 if you have the <unistd.h> header file. */
#define HAVE_UNISTD_H 1
+/* Define to 1 if you have the `unlinkat' function. */
+#define HAVE_UNLINKAT 1
+
/* Define to 1 if you have the `vfork' function. */
#define HAVE_VFORK 1
@@ -144,6 +208,9 @@
/* Define to 1 if you have the <vfork.h> header file. */
/* #undef HAVE_VFORK_H */
+/* Define to 1 if you have the `vis' function. */
+#define HAVE_VIS 1
+
/* Define to 1 if `fork' works. */
#define HAVE_WORKING_FORK 1
@@ -154,6 +221,10 @@
slash. */
#define LSTAT_FOLLOWS_SLASHED_SYMLINK 1
+/* Define to the sub-directory in which libtool stores uninstalled libraries.
+ */
+#define LT_OBJDIR ".libs/"
+
/* Name of package */
#define PACKAGE "OpenBSM"
@@ -164,13 +235,16 @@
#define PACKAGE_NAME "OpenBSM"
/* Define to the full name and version of this package. */
-#define PACKAGE_STRING "OpenBSM 1.1p2"
+#define PACKAGE_STRING "OpenBSM 1.2-alpha3"
/* Define to the one symbol short name of this package. */
#define PACKAGE_TARNAME "openbsm"
+/* Define to the home page for this package. */
+#define PACKAGE_URL ""
+
/* Define to the version of this package. */
-#define PACKAGE_VERSION "1.1p2"
+#define PACKAGE_VERSION "1.2-alpha3"
/* Define as the return type of signal handlers (`int' or `void'). */
#define RETSIGTYPE void
@@ -184,15 +258,34 @@
/* Define to 1 if your <sys/time.h> declares `struct tm'. */
/* #undef TM_IN_SYS_TIME */
+/* Define if compat/endian_enc.h is required */
+/* #undef USE_COMPAT_ENDIAN_ENC_H */
+
+/* Define if compat/endian.h is required */
+/* #undef USE_COMPAT_ENDIAN_H */
+
+/* Define if endian.h should be included */
+/* #undef USE_ENDIAN_H */
+
+/* Define if machine/endian.h should be included */
+/* #undef USE_MACHINE_ENDIAN_H */
+
/* Define if uses Mach IPC for Triggers messages */
/* #undef USE_MACH_IPC */
/* Define to use native include files */
-#define USE_NATIVE_INCLUDES /**/
+/* #undef USE_NATIVE_INCLUDES */
+/* Define if sys/endian.h should be included */
+#define USE_SYS_ENDIAN_H /**/
+
/* Version number of package */
-#define VERSION "1.1p2"
+#define VERSION "1.2-alpha3"
+/* Define to 1 if `lex' declares `yytext' as a `char *' by default, not a
+ `char[]'. */
+#define YYTEXT_POINTER 1
+
/* Use extended API on platforms that require it */
#define _GNU_SOURCE /**/
Modified: trunk/contrib/openbsm/config/config.h.in
===================================================================
--- trunk/contrib/openbsm/config/config.h.in 2016-09-18 22:43:06 UTC (rev 8504)
+++ trunk/contrib/openbsm/config/config.h.in 2016-09-18 22:45:22 UTC (rev 8505)
@@ -3,15 +3,21 @@
/* Define to 1 if you have the `alarm' function. */
#undef HAVE_ALARM
+/* Define to 1 if you have the `arc4random' function. */
+#undef HAVE_ARC4RANDOM
+
+/* Define to 1 if you have the `arc4random_buf' function. */
+#undef HAVE_ARC4RANDOM_BUF
+
/* Define if audit system calls present */
#undef HAVE_AUDIT_SYSCALLS
-/* Define if be32enc is present */
-#undef HAVE_BE32ENC
-
/* Define to 1 if you have the `bzero' function. */
#undef HAVE_BZERO
+/* Define to 1 if you have the `cap_enter' function. */
+#undef HAVE_CAP_ENTER
+
/* Define to 1 if your system has a working `chown' function. */
#undef HAVE_CHOWN
@@ -18,6 +24,9 @@
/* Define to 1 if you have the `clock_gettime' function. */
#undef HAVE_CLOCK_GETTIME
+/* Define to 1 if you have the `closefrom' function. */
+#undef HAVE_CLOSEFROM
+
/* Define to 1 if you have the <dlfcn.h> header file. */
#undef HAVE_DLFCN_H
@@ -24,9 +33,18 @@
/* Define to 1 if you have the <endian.h> header file. */
#undef HAVE_ENDIAN_H
+/* Define to 1 if you have the `faccessat' function. */
+#undef HAVE_FACCESSAT
+
+/* Define to 1 if you have the `fdopendir' function. */
+#undef HAVE_FDOPENDIR
+
/* Define to 1 if you have the `fork' function. */
#undef HAVE_FORK
+/* Define to 1 if you have the `fstatat' function. */
+#undef HAVE_FSTATAT
+
/* Define to 1 if you have the `ftruncate' function. */
#undef HAVE_FTRUNCATE
@@ -33,6 +51,12 @@
/* Define if queue.h includes LIST_FIRST */
#undef HAVE_FULL_QUEUE_H
+/* Define to 1 if you have the `getresgid' function. */
+#undef HAVE_GETRESGID
+
+/* Define to 1 if you have the `getresuid' function. */
+#undef HAVE_GETRESUID
+
/* Define to 1 if you have the `gettimeofday' function. */
#undef HAVE_GETTIMEOFDAY
@@ -54,6 +78,12 @@
/* Define if ipc_perm.__seq instead of seq */
#undef HAVE_IPC_PERM___SEQ
+/* Define to 1 if you have the `jail' function. */
+#undef HAVE_JAIL
+
+/* Define to 1 if you have the `kqueue' function. */
+#undef HAVE_KQUEUE
+
/* Define to 1 if you have the <machine/endian.h> header file. */
#undef HAVE_MACHINE_ENDIAN_H
@@ -70,9 +100,37 @@
/* Define to 1 if you have the `memset' function. */
#undef HAVE_MEMSET
+/* Define to 1 if you have the `openat' function. */
+#undef HAVE_OPENAT
+
+/* Define to 1 if you have the <printf.h> header file. */
+#undef HAVE_PRINTF_H
+
+/* Define to 1 if you have the `pthread_condattr_setclock' function. */
+#undef HAVE_PTHREAD_CONDATTR_SETCLOCK
+
+/* Define to 1 if you have the `pthread_cond_timedwait_relative_np' function.
+ */
+#undef HAVE_PTHREAD_COND_TIMEDWAIT_RELATIVE_NP
+
/* Define to 1 if you have the `pthread_mutex_lock' function. */
#undef HAVE_PTHREAD_MUTEX_LOCK
+/* Define to 1 if you have the <pthread_np.h> header file. */
+#undef HAVE_PTHREAD_NP_H
+
+/* Define to 1 if you have the `renameat' function. */
+#undef HAVE_RENAMEAT
+
+/* Define to 1 if you have the `setproctitle' function. */
+#undef HAVE_SETPROCTITLE
+
+/* Define to 1 if you have the `sigtimedwait' function. */
+#undef HAVE_SIGTIMEDWAIT
+
+/* Define if sockaddr_storage.ss_len field exists */
+#undef HAVE_SOCKADDR_STORAGE_SS_LEN
+
/* Define to 1 if `stat' has the bug that it succeeds when given the
zero-length file name argument. */
#undef HAVE_STAT_EMPTY_STRING_BUG
@@ -104,6 +162,9 @@
/* Define to 1 if you have the `strlcpy' function. */
#undef HAVE_STRLCPY
+/* Define to 1 if you have the `strndup' function. */
+#undef HAVE_STRNDUP
+
/* Define to 1 if you have the `strrchr' function. */
#undef HAVE_STRRCHR
@@ -116,7 +177,7 @@
/* Define to 1 if you have the `strtoul' function. */
#undef HAVE_STRTOUL
-/* Define to 1 if `st_rdev' is member of `struct stat'. */
+/* Define to 1 if `st_rdev' is a member of `struct stat'. */
#undef HAVE_STRUCT_STAT_ST_RDEV
/* Define to 1 if you have the <sys/endian.h> header file. */
@@ -137,6 +198,9 @@
/* Define to 1 if you have the <unistd.h> header file. */
#undef HAVE_UNISTD_H
+/* Define to 1 if you have the `unlinkat' function. */
+#undef HAVE_UNLINKAT
+
/* Define to 1 if you have the `vfork' function. */
#undef HAVE_VFORK
@@ -143,6 +207,9 @@
/* Define to 1 if you have the <vfork.h> header file. */
#undef HAVE_VFORK_H
+/* Define to 1 if you have the `vis' function. */
+#undef HAVE_VIS
+
/* Define to 1 if `fork' works. */
#undef HAVE_WORKING_FORK
@@ -153,6 +220,10 @@
slash. */
#undef LSTAT_FOLLOWS_SLASHED_SYMLINK
+/* Define to the sub-directory in which libtool stores uninstalled libraries.
+ */
+#undef LT_OBJDIR
+
/* Name of package */
#undef PACKAGE
@@ -168,6 +239,9 @@
/* Define to the one symbol short name of this package. */
#undef PACKAGE_TARNAME
+/* Define to the home page for this package. */
+#undef PACKAGE_URL
+
/* Define to the version of this package. */
#undef PACKAGE_VERSION
@@ -183,6 +257,18 @@
/* Define to 1 if your <sys/time.h> declares `struct tm'. */
#undef TM_IN_SYS_TIME
+/* Define if compat/endian_enc.h is required */
+#undef USE_COMPAT_ENDIAN_ENC_H
+
+/* Define if compat/endian.h is required */
+#undef USE_COMPAT_ENDIAN_H
+
+/* Define if endian.h should be included */
+#undef USE_ENDIAN_H
+
+/* Define if machine/endian.h should be included */
+#undef USE_MACHINE_ENDIAN_H
+
/* Define if uses Mach IPC for Triggers messages */
#undef USE_MACH_IPC
@@ -189,9 +275,16 @@
/* Define to use native include files */
#undef USE_NATIVE_INCLUDES
+/* Define if sys/endian.h should be included */
+#undef USE_SYS_ENDIAN_H
+
/* Version number of package */
#undef VERSION
+/* Define to 1 if `lex' declares `yytext' as a `char *' by default, not a
+ `char[]'. */
+#undef YYTEXT_POINTER
+
/* Use extended API on platforms that require it */
#undef _GNU_SOURCE
Modified: trunk/contrib/openbsm/config/ltmain.sh
===================================================================
--- trunk/contrib/openbsm/config/ltmain.sh 2016-09-18 22:43:06 UTC (rev 8504)
+++ trunk/contrib/openbsm/config/ltmain.sh 2016-09-18 22:45:22 UTC (rev 8505)
@@ -1,52 +1,90 @@
-# ltmain.sh - Provide generalized library-building support services.
-# NOTE: Changing this file will not affect anything until you rerun configure.
-#
+
+# libtool (GNU libtool) 2.4.2
+# Written by Gordon Matzigkeit <gord at gnu.ai.mit.edu>, 1996
+
# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006,
-# 2007, 2008 Free Software Foundation, Inc.
-# Originally by Gordon Matzigkeit <gord at gnu.ai.mit.edu>, 1996
-#
-# This program is free software; you can redistribute it and/or modify
+# 2007, 2008, 2009, 2010, 2011 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions. There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# GNU Libtool is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
-# This program is distributed in the hope that it will be useful, but
+# As a special exception to the GNU General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU Libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+# along with GNU Libtool; see the file COPYING. If not, a copy
+# can be downloaded from http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+# Usage: $progname [OPTION]... [MODE-ARG]...
#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
+# Provide generalized library-building support services.
+#
+# --config show all configuration variables
+# --debug enable verbose shell tracing
+# -n, --dry-run display commands without modifying any files
+# --features display basic configuration information and exit
+# --mode=MODE use operation mode MODE
+# --preserve-dup-deps don't remove duplicate dependency libraries
+# --quiet, --silent don't print informational messages
+# --no-quiet, --no-silent
+# print informational messages (default)
+# --no-warn don't display warning messages
+# --tag=TAG use configuration variables from tag TAG
+# -v, --verbose print more informational messages than default
+# --no-verbose don't print the extra informational messages
+# --version print version information
+# -h, --help, --help-all print short, long, or detailed help message
+#
+# MODE must be one of the following:
+#
+# clean remove files from the build directory
+# compile compile a source file into a libtool object
+# execute automatically set library path, then run a program
+# finish complete the installation of libtool libraries
+# install install libraries or executables
+# link create a library or an executable
+# uninstall remove libraries from an installed directory
+#
+# MODE-ARGS vary depending on the MODE. When passed as first option,
+# `--mode=MODE' may be abbreviated as `MODE' or a unique abbreviation of that.
+# Try `$progname --help --mode=MODE' for a more detailed description of MODE.
+#
+# When reporting a bug, please describe a test case to reproduce it and
+# include the following information:
+#
+# host-triplet: $host
+# shell: $SHELL
+# compiler: $LTCC
+# compiler flags: $LTCFLAGS
+# linker: $LD (gnu? $with_gnu_ld)
+# $progname: (GNU libtool) 2.4.2
+# automake: $automake_version
+# autoconf: $autoconf_version
+#
+# Report bugs to <bug-libtool at gnu.org>.
+# GNU libtool home page: <http://www.gnu.org/software/libtool/>.
+# General help using GNU software: <http://www.gnu.org/gethelp/>.
-basename="s,^.*/,,g"
-
-# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
-# is ksh but when the shell is invoked as "sh" and the current value of
-# the _XPG environment variable is not equal to 1 (one), the special
-# positional parameter $0, within a function call, is the name of the
-# function.
-progpath="$0"
-
-# The name of this program:
-progname=`echo "$progpath" | $SED $basename`
-modename="$progname"
-
-# Global variables:
-EXIT_SUCCESS=0
-EXIT_FAILURE=1
-
-PROGRAM=ltmain.sh
+PROGRAM=libtool
PACKAGE=libtool
-VERSION=1.5.26
-TIMESTAMP=" (1.1220.2.492 2008/01/30 06:40:56)"
+VERSION=2.4.2
+TIMESTAMP=""
+package_revision=1.3337
-# Be Bourne compatible (taken from Autoconf:_AS_BOURNE_COMPATIBLE).
+# Be Bourne compatible
if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
emulate sh
NULLCMD=:
@@ -60,105 +98,458 @@
BIN_SH=xpg4; export BIN_SH # for Tru64
DUALCASE=1; export DUALCASE # for MKS sh
-# Check that we have a working $echo.
-if test "X$1" = X--no-reexec; then
- # Discard the --no-reexec flag, and continue.
- shift
-elif test "X$1" = X--fallback-echo; then
- # Avoid inline document here, it may be left over
- :
-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
- # Yippee, $echo works!
- :
-else
- # Restart under the correct shell, and then maybe $echo will work.
- exec $SHELL "$progpath" --no-reexec ${1+"$@"}
-fi
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+ eval 'cat <<_LTECHO_EOF
+$1
+_LTECHO_EOF'
+}
-if test "X$1" = X--fallback-echo; then
- # used as fallback echo
- shift
- cat <<EOF
-$*
-EOF
- exit $EXIT_SUCCESS
-fi
-
-default_mode=
-help="Try \`$progname --help' for more information."
-magic="%%%MAGIC variable%%%"
-mkdir="mkdir"
-mv="mv -f"
-rm="rm -f"
-
-# Sed substitution that helps us do robust quoting. It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed="${SED}"' -e 1s/^X//'
-sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g'
-# test EBCDIC or ASCII
-case `echo X|tr X '\101'` in
- A) # ASCII based system
- # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
- SP2NL='tr \040 \012'
- NL2SP='tr \015\012 \040\040'
- ;;
- *) # EBCDIC based system
- SP2NL='tr \100 \n'
- NL2SP='tr \r\n \100\100'
- ;;
-esac
-
-# NLS nuisances.
-# Only set LANG and LC_ALL to C if already set.
-# These must not be set unconditionally because not all systems understand
-# e.g. LANG=C (notably SCO).
-# We save the old values to restore during execute mode.
-lt_env=
+# NLS nuisances: We save the old values to restore during execute mode.
+lt_user_locale=
+lt_safe_locale=
for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
do
eval "if test \"\${$lt_var+set}\" = set; then
- save_$lt_var=\$$lt_var
- lt_env=\"$lt_var=\$$lt_var \$lt_env\"
- $lt_var=C
+ save_$lt_var=\$$lt_var
+ $lt_var=C
export $lt_var
+ lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\"
+ lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\"
fi"
done
+LC_ALL=C
+LANGUAGE=C
+export LANGUAGE LC_ALL
-if test -n "$lt_env"; then
- lt_env="env $lt_env"
-fi
+$lt_unset CDPATH
+
+# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
+# is ksh but when the shell is invoked as "sh" and the current value of
+# the _XPG environment variable is not equal to 1 (one), the special
+# positional parameter $0, within a function call, is the name of the
+# function.
+progpath="$0"
+
+
+
+: ${CP="cp -f"}
+test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'}
+: ${MAKE="make"}
+: ${MKDIR="mkdir"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+: ${SHELL="${CONFIG_SHELL-/bin/sh}"}
+: ${Xsed="$SED -e 1s/^X//"}
+
+# Global variables:
+EXIT_SUCCESS=0
+EXIT_FAILURE=1
+EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing.
+EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake.
+
+exit_status=$EXIT_SUCCESS
+
# Make sure IFS has a sensible default
lt_nl='
'
IFS=" $lt_nl"
-if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
- $echo "$modename: not configured to build any kind of library" 1>&2
- $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
- exit $EXIT_FAILURE
-fi
+dirname="s,/[^/]*$,,"
+basename="s,^.*/,,"
-# Global variables.
-mode=$default_mode
-nonopt=
-prev=
-prevopt=
-run=
-show="$echo"
-show_help=
-execute_dlfiles=
-duplicate_deps=no
-preserve_args=
-lo2o="s/\\.lo\$/.${objext}/"
-o2lo="s/\\.${objext}\$/.lo/"
-extracted_archives=
-extracted_serial=0
+# func_dirname file append nondir_replacement
+# Compute the dirname of FILE. If nonempty, add APPEND to the result,
+# otherwise set result to NONDIR_REPLACEMENT.
+func_dirname ()
+{
+ func_dirname_result=`$ECHO "${1}" | $SED "$dirname"`
+ if test "X$func_dirname_result" = "X${1}"; then
+ func_dirname_result="${3}"
+ else
+ func_dirname_result="$func_dirname_result${2}"
+ fi
+} # func_dirname may be replaced by extended shell implementation
-#####################################
-# Shell function definitions:
-# This seems to be the best place for them
+# func_basename file
+func_basename ()
+{
+ func_basename_result=`$ECHO "${1}" | $SED "$basename"`
+} # func_basename may be replaced by extended shell implementation
+
+
+# func_dirname_and_basename file append nondir_replacement
+# perform func_basename and func_dirname in a single function
+# call:
+# dirname: Compute the dirname of FILE. If nonempty,
+# add APPEND to the result, otherwise set result
+# to NONDIR_REPLACEMENT.
+# value returned in "$func_dirname_result"
+# basename: Compute filename of FILE.
+# value retuned in "$func_basename_result"
+# Implementation must be kept synchronized with func_dirname
+# and func_basename. For efficiency, we do not delegate to
+# those functions but instead duplicate the functionality here.
+func_dirname_and_basename ()
+{
+ # Extract subdirectory from the argument.
+ func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"`
+ if test "X$func_dirname_result" = "X${1}"; then
+ func_dirname_result="${3}"
+ else
+ func_dirname_result="$func_dirname_result${2}"
+ fi
+ func_basename_result=`$ECHO "${1}" | $SED -e "$basename"`
+} # func_dirname_and_basename may be replaced by extended shell implementation
+
+
+# func_stripname prefix suffix name
+# strip PREFIX and SUFFIX off of NAME.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+# func_strip_suffix prefix name
+func_stripname ()
+{
+ case ${2} in
+ .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
+ *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
+ esac
+} # func_stripname may be replaced by extended shell implementation
+
+
+# These SED scripts presuppose an absolute path with a trailing slash.
+pathcar='s,^/\([^/]*\).*$,\1,'
+pathcdr='s,^/[^/]*,,'
+removedotparts=':dotsl
+ s@/\./@/@g
+ t dotsl
+ s,/\.$,/,'
+collapseslashes='s@/\{1,\}@/@g'
+finalslash='s,/*$,/,'
+
+# func_normal_abspath PATH
+# Remove doubled-up and trailing slashes, "." path components,
+# and cancel out any ".." path components in PATH after making
+# it an absolute path.
+# value returned in "$func_normal_abspath_result"
+func_normal_abspath ()
+{
+ # Start from root dir and reassemble the path.
+ func_normal_abspath_result=
+ func_normal_abspath_tpath=$1
+ func_normal_abspath_altnamespace=
+ case $func_normal_abspath_tpath in
+ "")
+ # Empty path, that just means $cwd.
+ func_stripname '' '/' "`pwd`"
+ func_normal_abspath_result=$func_stripname_result
+ return
+ ;;
+ # The next three entries are used to spot a run of precisely
+ # two leading slashes without using negated character classes;
+ # we take advantage of case's first-match behaviour.
+ ///*)
+ # Unusual form of absolute path, do nothing.
+ ;;
+ //*)
+ # Not necessarily an ordinary path; POSIX reserves leading '//'
+ # and for example Cygwin uses it to access remote file shares
+ # over CIFS/SMB, so we conserve a leading double slash if found.
+ func_normal_abspath_altnamespace=/
+ ;;
+ /*)
+ # Absolute path, do nothing.
+ ;;
+ *)
+ # Relative path, prepend $cwd.
+ func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath
+ ;;
+ esac
+ # Cancel out all the simple stuff to save iterations. We also want
+ # the path to end with a slash for ease of parsing, so make sure
+ # there is one (and only one) here.
+ func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
+ -e "$removedotparts" -e "$collapseslashes" -e "$finalslash"`
+ while :; do
+ # Processed it all yet?
+ if test "$func_normal_abspath_tpath" = / ; then
+ # If we ascended to the root using ".." the result may be empty now.
+ if test -z "$func_normal_abspath_result" ; then
+ func_normal_abspath_result=/
+ fi
+ break
+ fi
+ func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \
+ -e "$pathcar"`
+ func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
+ -e "$pathcdr"`
+ # Figure out what to do with it
+ case $func_normal_abspath_tcomponent in
+ "")
+ # Trailing empty path component, ignore it.
+ ;;
+ ..)
+ # Parent dir; strip last assembled component from result.
+ func_dirname "$func_normal_abspath_result"
+ func_normal_abspath_result=$func_dirname_result
+ ;;
+ *)
+ # Actual path component, append it.
+ func_normal_abspath_result=$func_normal_abspath_result/$func_normal_abspath_tcomponent
+ ;;
+ esac
+ done
+ # Restore leading double-slash if one was found on entry.
+ func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result
+}
+
+# func_relative_path SRCDIR DSTDIR
+# generates a relative path from SRCDIR to DSTDIR, with a trailing
+# slash if non-empty, suitable for immediately appending a filename
+# without needing to append a separator.
+# value returned in "$func_relative_path_result"
+func_relative_path ()
+{
+ func_relative_path_result=
+ func_normal_abspath "$1"
+ func_relative_path_tlibdir=$func_normal_abspath_result
+ func_normal_abspath "$2"
+ func_relative_path_tbindir=$func_normal_abspath_result
+
+ # Ascend the tree starting from libdir
+ while :; do
+ # check if we have found a prefix of bindir
+ case $func_relative_path_tbindir in
+ $func_relative_path_tlibdir)
+ # found an exact match
+ func_relative_path_tcancelled=
+ break
+ ;;
+ $func_relative_path_tlibdir*)
+ # found a matching prefix
+ func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir"
+ func_relative_path_tcancelled=$func_stripname_result
+ if test -z "$func_relative_path_result"; then
+ func_relative_path_result=.
+ fi
+ break
+ ;;
+ *)
+ func_dirname $func_relative_path_tlibdir
+ func_relative_path_tlibdir=${func_dirname_result}
+ if test "x$func_relative_path_tlibdir" = x ; then
+ # Have to descend all the way to the root!
+ func_relative_path_result=../$func_relative_path_result
+ func_relative_path_tcancelled=$func_relative_path_tbindir
+ break
+ fi
+ func_relative_path_result=../$func_relative_path_result
+ ;;
+ esac
+ done
+
+ # Now calculate path; take care to avoid doubling-up slashes.
+ func_stripname '' '/' "$func_relative_path_result"
+ func_relative_path_result=$func_stripname_result
+ func_stripname '/' '/' "$func_relative_path_tcancelled"
+ if test "x$func_stripname_result" != x ; then
+ func_relative_path_result=${func_relative_path_result}/${func_stripname_result}
+ fi
+
+ # Normalisation. If bindir is libdir, return empty string,
+ # else relative path ending with a slash; either way, target
+ # file name can be directly appended.
+ if test ! -z "$func_relative_path_result"; then
+ func_stripname './' '' "$func_relative_path_result/"
+ func_relative_path_result=$func_stripname_result
+ fi
+}
+
+# The name of this program:
+func_dirname_and_basename "$progpath"
+progname=$func_basename_result
+
+# Make sure we have an absolute path for reexecution:
+case $progpath in
+ [\\/]*|[A-Za-z]:\\*) ;;
+ *[\\/]*)
+ progdir=$func_dirname_result
+ progdir=`cd "$progdir" && pwd`
+ progpath="$progdir/$progname"
+ ;;
+ *)
+ save_IFS="$IFS"
+ IFS=${PATH_SEPARATOR-:}
+ for progdir in $PATH; do
+ IFS="$save_IFS"
+ test -x "$progdir/$progname" && break
+ done
+ IFS="$save_IFS"
+ test -n "$progdir" || progdir=`pwd`
+ progpath="$progdir/$progname"
+ ;;
+esac
+
+# Sed substitution that helps us do robust quoting. It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed="${SED}"' -e 1s/^X//'
+sed_quote_subst='s/\([`"$\\]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\(["`\\]\)/\\\1/g'
+
+# Sed substitution that turns a string into a regex matching for the
+# string literally.
+sed_make_literal_regex='s,[].[^$\\*\/],\\&,g'
+
+# Sed substitution that converts a w32 file name or path
+# which contains forward slashes, into one that contains
+# (escaped) backslashes. A very naive implementation.
+lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
+
+# Re-`\' parameter expansions in output of double_quote_subst that were
+# `\'-ed in input to the same. If an odd number of `\' preceded a '$'
+# in input to double_quote_subst, that '$' was protected from expansion.
+# Since each input `\' is now two `\'s, look for any number of runs of
+# four `\'s followed by two `\'s and then a '$'. `\' that '$'.
+bs='\\'
+bs2='\\\\'
+bs4='\\\\\\\\'
+dollar='\$'
+sed_double_backslash="\
+ s/$bs4/&\\
+/g
+ s/^$bs2$dollar/$bs&/
+ s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g
+ s/\n//g"
+
+# Standard options:
+opt_dry_run=false
+opt_help=false
+opt_quiet=false
+opt_verbose=false
+opt_warning=:
+
+# func_echo arg...
+# Echo program name prefixed message, along with the current mode
+# name if it has been set yet.
+func_echo ()
+{
+ $ECHO "$progname: ${opt_mode+$opt_mode: }$*"
+}
+
+# func_verbose arg...
+# Echo program name prefixed message in verbose mode only.
+func_verbose ()
+{
+ $opt_verbose && func_echo ${1+"$@"}
+
+ # A bug in bash halts the script if the last line of a function
+ # fails when set -e is in force, so we need another command to
+ # work around that:
+ :
+}
+
+# func_echo_all arg...
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+ $ECHO "$*"
+}
+
+# func_error arg...
+# Echo program name prefixed message to standard error.
+func_error ()
+{
+ $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2
+}
+
+# func_warning arg...
+# Echo program name prefixed warning message to standard error.
+func_warning ()
+{
+ $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2
+
+ # bash bug again:
+ :
+}
+
+# func_fatal_error arg...
+# Echo program name prefixed message to standard error, and exit.
+func_fatal_error ()
+{
+ func_error ${1+"$@"}
+ exit $EXIT_FAILURE
+}
+
+# func_fatal_help arg...
+# Echo program name prefixed message to standard error, followed by
+# a help hint, and exit.
+func_fatal_help ()
+{
+ func_error ${1+"$@"}
+ func_fatal_error "$help"
+}
+help="Try \`$progname --help' for more information." ## default
+
+
+# func_grep expression filename
+# Check whether EXPRESSION matches any line of FILENAME, without output.
+func_grep ()
+{
+ $GREP "$1" "$2" >/dev/null 2>&1
+}
+
+
+# func_mkdir_p directory-path
+# Make sure the entire path to DIRECTORY-PATH is available.
+func_mkdir_p ()
+{
+ my_directory_path="$1"
+ my_dir_list=
+
+ if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then
+
+ # Protect directory names starting with `-'
+ case $my_directory_path in
+ -*) my_directory_path="./$my_directory_path" ;;
+ esac
+
+ # While some portion of DIR does not yet exist...
+ while test ! -d "$my_directory_path"; do
+ # ...make a list in topmost first order. Use a colon delimited
+ # list incase some portion of path contains whitespace.
+ my_dir_list="$my_directory_path:$my_dir_list"
+
+ # If the last portion added has no slash in it, the list is done
+ case $my_directory_path in */*) ;; *) break ;; esac
+
+ # ...otherwise throw away the child directory and loop
+ my_directory_path=`$ECHO "$my_directory_path" | $SED -e "$dirname"`
+ done
+ my_dir_list=`$ECHO "$my_dir_list" | $SED 's,:*$,,'`
+
+ save_mkdir_p_IFS="$IFS"; IFS=':'
+ for my_dir in $my_dir_list; do
+ IFS="$save_mkdir_p_IFS"
+ # mkdir can fail with a `File exist' error if two processes
+ # try to create one of the directories concurrently. Don't
+ # stop in that case!
+ $MKDIR "$my_dir" 2>/dev/null || :
+ done
+ IFS="$save_mkdir_p_IFS"
+
+ # Bail out if we (or some other process) failed to create a directory.
+ test -d "$my_directory_path" || \
+ func_fatal_error "Failed to create \`$1'"
+ fi
+}
+
+
# func_mktempdir [string]
# Make a temporary directory that won't clash with other running
# libtool processes, and avoids race conditions if possible. If
@@ -167,7 +558,7 @@
{
my_template="${TMPDIR-/tmp}/${1-$progname}"
- if test "$run" = ":"; then
+ if test "$opt_dry_run" = ":"; then
# Return a directory name, but don't create it in dry-run mode
my_tmpdir="${my_template}-$$"
else
@@ -176,71 +567,804 @@
my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
if test ! -d "$my_tmpdir"; then
- # Failing that, at least try and use $RANDOM to avoid a race
- my_tmpdir="${my_template}-${RANDOM-0}$$"
+ # Failing that, at least try and use $RANDOM to avoid a race
+ my_tmpdir="${my_template}-${RANDOM-0}$$"
- save_mktempdir_umask=`umask`
- umask 0077
- $mkdir "$my_tmpdir"
- umask $save_mktempdir_umask
+ save_mktempdir_umask=`umask`
+ umask 0077
+ $MKDIR "$my_tmpdir"
+ umask $save_mktempdir_umask
fi
# If we're not in dry-run mode, bomb out on failure
- test -d "$my_tmpdir" || {
- $echo "cannot create temporary directory \`$my_tmpdir'" 1>&2
- exit $EXIT_FAILURE
- }
+ test -d "$my_tmpdir" || \
+ func_fatal_error "cannot create temporary directory \`$my_tmpdir'"
fi
- $echo "X$my_tmpdir" | $Xsed
+ $ECHO "$my_tmpdir"
}
-# func_win32_libid arg
-# return the library type of file 'arg'
-#
-# Need a lot of goo to handle *both* DLLs and import libs
-# Has to be a shell function in order to 'eat' the argument
-# that is supplied when $file_magic_command is called.
-func_win32_libid ()
+# func_quote_for_eval arg
+# Aesthetically quote ARG to be evaled later.
+# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT
+# is double-quoted, suitable for a subsequent eval, whereas
+# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters
+# which are still active within double quotes backslashified.
+func_quote_for_eval ()
{
- win32_libid_type="unknown"
- win32_fileres=`file -L $1 2>/dev/null`
- case $win32_fileres in
- *ar\ archive\ import\ library*) # definitely import
- win32_libid_type="x86 archive import"
- ;;
- *ar\ archive*) # could be an import, or static
- if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | \
- $EGREP -e 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
- win32_nmres=`eval $NM -f posix -A $1 | \
- $SED -n -e '1,100{
- / I /{
- s,.*,import,
- p
- q
- }
- }'`
- case $win32_nmres in
- import*) win32_libid_type="x86 archive import";;
- *) win32_libid_type="x86 archive static";;
- esac
+ case $1 in
+ *[\\\`\"\$]*)
+ func_quote_for_eval_unquoted_result=`$ECHO "$1" | $SED "$sed_quote_subst"` ;;
+ *)
+ func_quote_for_eval_unquoted_result="$1" ;;
+ esac
+
+ case $func_quote_for_eval_unquoted_result in
+ # Double-quote args containing shell metacharacters to delay
+ # word splitting, command substitution and and variable
+ # expansion for a subsequent eval.
+ # Many Bourne shells cannot handle close brackets correctly
+ # in scan sets, so we specify it separately.
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\""
+ ;;
+ *)
+ func_quote_for_eval_result="$func_quote_for_eval_unquoted_result"
+ esac
+}
+
+
+# func_quote_for_expand arg
+# Aesthetically quote ARG to be evaled later; same as above,
+# but do not quote variable references.
+func_quote_for_expand ()
+{
+ case $1 in
+ *[\\\`\"]*)
+ my_arg=`$ECHO "$1" | $SED \
+ -e "$double_quote_subst" -e "$sed_double_backslash"` ;;
+ *)
+ my_arg="$1" ;;
+ esac
+
+ case $my_arg in
+ # Double-quote args containing shell metacharacters to delay
+ # word splitting and command substitution for a subsequent eval.
+ # Many Bourne shells cannot handle close brackets correctly
+ # in scan sets, so we specify it separately.
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ my_arg="\"$my_arg\""
+ ;;
+ esac
+
+ func_quote_for_expand_result="$my_arg"
+}
+
+
+# func_show_eval cmd [fail_exp]
+# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is
+# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP
+# is given, then evaluate it.
+func_show_eval ()
+{
+ my_cmd="$1"
+ my_fail_exp="${2-:}"
+
+ ${opt_silent-false} || {
+ func_quote_for_expand "$my_cmd"
+ eval "func_echo $func_quote_for_expand_result"
+ }
+
+ if ${opt_dry_run-false}; then :; else
+ eval "$my_cmd"
+ my_status=$?
+ if test "$my_status" -eq 0; then :; else
+ eval "(exit $my_status); $my_fail_exp"
+ fi
fi
+}
+
+
+# func_show_eval_locale cmd [fail_exp]
+# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is
+# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP
+# is given, then evaluate it. Use the saved locale for evaluation.
+func_show_eval_locale ()
+{
+ my_cmd="$1"
+ my_fail_exp="${2-:}"
+
+ ${opt_silent-false} || {
+ func_quote_for_expand "$my_cmd"
+ eval "func_echo $func_quote_for_expand_result"
+ }
+
+ if ${opt_dry_run-false}; then :; else
+ eval "$lt_user_locale
+ $my_cmd"
+ my_status=$?
+ eval "$lt_safe_locale"
+ if test "$my_status" -eq 0; then :; else
+ eval "(exit $my_status); $my_fail_exp"
+ fi
+ fi
+}
+
+# func_tr_sh
+# Turn $1 into a string suitable for a shell variable name.
+# Result is stored in $func_tr_sh_result. All characters
+# not in the set a-zA-Z0-9_ are replaced with '_'. Further,
+# if $1 begins with a digit, a '_' is prepended as well.
+func_tr_sh ()
+{
+ case $1 in
+ [0-9]* | *[!a-zA-Z0-9_]*)
+ func_tr_sh_result=`$ECHO "$1" | $SED 's/^\([0-9]\)/_\1/; s/[^a-zA-Z0-9_]/_/g'`
;;
- *DLL*)
- win32_libid_type="x86 DLL"
+ * )
+ func_tr_sh_result=$1
;;
- *executable*) # but shell scripts are "executable" too...
- case $win32_fileres in
- *MS\ Windows\ PE\ Intel*)
- win32_libid_type="x86 DLL"
+ esac
+}
+
+
+# func_version
+# Echo version message to standard output and exit.
+func_version ()
+{
+ $opt_debug
+
+ $SED -n '/(C)/!b go
+ :more
+ /\./!{
+ N
+ s/\n# / /
+ b more
+ }
+ :go
+ /^# '$PROGRAM' (GNU /,/# warranty; / {
+ s/^# //
+ s/^# *$//
+ s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/
+ p
+ }' < "$progpath"
+ exit $?
+}
+
+# func_usage
+# Echo short help message to standard output and exit.
+func_usage ()
+{
+ $opt_debug
+
+ $SED -n '/^# Usage:/,/^# *.*--help/ {
+ s/^# //
+ s/^# *$//
+ s/\$progname/'$progname'/
+ p
+ }' < "$progpath"
+ echo
+ $ECHO "run \`$progname --help | more' for full usage"
+ exit $?
+}
+
+# func_help [NOEXIT]
+# Echo long help message to standard output and exit,
+# unless 'noexit' is passed as argument.
+func_help ()
+{
+ $opt_debug
+
+ $SED -n '/^# Usage:/,/# Report bugs to/ {
+ :print
+ s/^# //
+ s/^# *$//
+ s*\$progname*'$progname'*
+ s*\$host*'"$host"'*
+ s*\$SHELL*'"$SHELL"'*
+ s*\$LTCC*'"$LTCC"'*
+ s*\$LTCFLAGS*'"$LTCFLAGS"'*
+ s*\$LD*'"$LD"'*
+ s/\$with_gnu_ld/'"$with_gnu_ld"'/
+ s/\$automake_version/'"`(${AUTOMAKE-automake} --version) 2>/dev/null |$SED 1q`"'/
+ s/\$autoconf_version/'"`(${AUTOCONF-autoconf} --version) 2>/dev/null |$SED 1q`"'/
+ p
+ d
+ }
+ /^# .* home page:/b print
+ /^# General help using/b print
+ ' < "$progpath"
+ ret=$?
+ if test -z "$1"; then
+ exit $ret
+ fi
+}
+
+# func_missing_arg argname
+# Echo program name prefixed message to standard error and set global
+# exit_cmd.
+func_missing_arg ()
+{
+ $opt_debug
+
+ func_error "missing argument for $1."
+ exit_cmd=exit
+}
+
+
+# func_split_short_opt shortopt
+# Set func_split_short_opt_name and func_split_short_opt_arg shell
+# variables after splitting SHORTOPT after the 2nd character.
+func_split_short_opt ()
+{
+ my_sed_short_opt='1s/^\(..\).*$/\1/;q'
+ my_sed_short_rest='1s/^..\(.*\)$/\1/;q'
+
+ func_split_short_opt_name=`$ECHO "$1" | $SED "$my_sed_short_opt"`
+ func_split_short_opt_arg=`$ECHO "$1" | $SED "$my_sed_short_rest"`
+} # func_split_short_opt may be replaced by extended shell implementation
+
+
+# func_split_long_opt longopt
+# Set func_split_long_opt_name and func_split_long_opt_arg shell
+# variables after splitting LONGOPT at the `=' sign.
+func_split_long_opt ()
+{
+ my_sed_long_opt='1s/^\(--[^=]*\)=.*/\1/;q'
+ my_sed_long_arg='1s/^--[^=]*=//'
+
+ func_split_long_opt_name=`$ECHO "$1" | $SED "$my_sed_long_opt"`
+ func_split_long_opt_arg=`$ECHO "$1" | $SED "$my_sed_long_arg"`
+} # func_split_long_opt may be replaced by extended shell implementation
+
+exit_cmd=:
+
+
+
+
+
+magic="%%%MAGIC variable%%%"
+magic_exe="%%%MAGIC EXE variable%%%"
+
+# Global variables.
+nonopt=
+preserve_args=
+lo2o="s/\\.lo\$/.${objext}/"
+o2lo="s/\\.${objext}\$/.lo/"
+extracted_archives=
+extracted_serial=0
+
+# If this variable is set in any of the actions, the command in it
+# will be execed at the end. This prevents here-documents from being
+# left over by shells.
+exec_cmd=
+
+# func_append var value
+# Append VALUE to the end of shell variable VAR.
+func_append ()
+{
+ eval "${1}=\$${1}\${2}"
+} # func_append may be replaced by extended shell implementation
+
+# func_append_quoted var value
+# Quote VALUE and append to the end of shell variable VAR, separated
+# by a space.
+func_append_quoted ()
+{
+ func_quote_for_eval "${2}"
+ eval "${1}=\$${1}\\ \$func_quote_for_eval_result"
+} # func_append_quoted may be replaced by extended shell implementation
+
+
+# func_arith arithmetic-term...
+func_arith ()
+{
+ func_arith_result=`expr "${@}"`
+} # func_arith may be replaced by extended shell implementation
+
+
+# func_len string
+# STRING may not start with a hyphen.
+func_len ()
+{
+ func_len_result=`expr "${1}" : ".*" 2>/dev/null || echo $max_cmd_len`
+} # func_len may be replaced by extended shell implementation
+
+
+# func_lo2o object
+func_lo2o ()
+{
+ func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"`
+} # func_lo2o may be replaced by extended shell implementation
+
+
+# func_xform libobj-or-source
+func_xform ()
+{
+ func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'`
+} # func_xform may be replaced by extended shell implementation
+
+
+# func_fatal_configuration arg...
+# Echo program name prefixed message to standard error, followed by
+# a configuration failure hint, and exit.
+func_fatal_configuration ()
+{
+ func_error ${1+"$@"}
+ func_error "See the $PACKAGE documentation for more information."
+ func_fatal_error "Fatal configuration error."
+}
+
+
+# func_config
+# Display the configuration for all the tags in this script.
+func_config ()
+{
+ re_begincf='^# ### BEGIN LIBTOOL'
+ re_endcf='^# ### END LIBTOOL'
+
+ # Default configuration.
+ $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath"
+
+ # Now print the configurations for the tags.
+ for tagname in $taglist; do
+ $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath"
+ done
+
+ exit $?
+}
+
+# func_features
+# Display the features supported by this script.
+func_features ()
+{
+ echo "host: $host"
+ if test "$build_libtool_libs" = yes; then
+ echo "enable shared libraries"
+ else
+ echo "disable shared libraries"
+ fi
+ if test "$build_old_libs" = yes; then
+ echo "enable static libraries"
+ else
+ echo "disable static libraries"
+ fi
+
+ exit $?
+}
+
+# func_enable_tag tagname
+# Verify that TAGNAME is valid, and either flag an error and exit, or
+# enable the TAGNAME tag. We also add TAGNAME to the global $taglist
+# variable here.
+func_enable_tag ()
+{
+ # Global variable:
+ tagname="$1"
+
+ re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"
+ re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$"
+ sed_extractcf="/$re_begincf/,/$re_endcf/p"
+
+ # Validate tagname.
+ case $tagname in
+ *[!-_A-Za-z0-9,/]*)
+ func_fatal_error "invalid tag name: $tagname"
;;
+ esac
+
+ # Don't test for the "default" C tag, as we know it's
+ # there but not specially marked.
+ case $tagname in
+ CC) ;;
+ *)
+ if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then
+ taglist="$taglist $tagname"
+
+ # Evaluate the configuration. Be careful to quote the path
+ # and the sed script, to avoid splitting on whitespace, but
+ # also don't use non-portable quotes within backquotes within
+ # quotes we have to do it in 2 steps:
+ extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
+ eval "$extractedcf"
+ else
+ func_error "ignoring unknown tag $tagname"
+ fi
+ ;;
+ esac
+}
+
+# func_check_version_match
+# Ensure that we are using m4 macros, and libtool script from the same
+# release of libtool.
+func_check_version_match ()
+{
+ if test "$package_revision" != "$macro_revision"; then
+ if test "$VERSION" != "$macro_version"; then
+ if test -z "$macro_version"; then
+ cat >&2 <<_LT_EOF
+$progname: Version mismatch error. This is $PACKAGE $VERSION, but the
+$progname: definition of this LT_INIT comes from an older release.
+$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
+$progname: and run autoconf again.
+_LT_EOF
+ else
+ cat >&2 <<_LT_EOF
+$progname: Version mismatch error. This is $PACKAGE $VERSION, but the
+$progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
+$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
+$progname: and run autoconf again.
+_LT_EOF
+ fi
+ else
+ cat >&2 <<_LT_EOF
+$progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision,
+$progname: but the definition of this LT_INIT comes from revision $macro_revision.
+$progname: You should recreate aclocal.m4 with macros from revision $package_revision
+$progname: of $PACKAGE $VERSION and run autoconf again.
+_LT_EOF
+ fi
+
+ exit $EXIT_MISMATCH
+ fi
+}
+
+
+# Shorthand for --mode=foo, only valid as the first argument
+case $1 in
+clean|clea|cle|cl)
+ shift; set dummy --mode clean ${1+"$@"}; shift
+ ;;
+compile|compil|compi|comp|com|co|c)
+ shift; set dummy --mode compile ${1+"$@"}; shift
+ ;;
+execute|execut|execu|exec|exe|ex|e)
+ shift; set dummy --mode execute ${1+"$@"}; shift
+ ;;
+finish|finis|fini|fin|fi|f)
+ shift; set dummy --mode finish ${1+"$@"}; shift
+ ;;
+install|instal|insta|inst|ins|in|i)
+ shift; set dummy --mode install ${1+"$@"}; shift
+ ;;
+link|lin|li|l)
+ shift; set dummy --mode link ${1+"$@"}; shift
+ ;;
+uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
+ shift; set dummy --mode uninstall ${1+"$@"}; shift
+ ;;
+esac
+
+
+
+# Option defaults:
+opt_debug=:
+opt_dry_run=false
+opt_config=false
+opt_preserve_dup_deps=false
+opt_features=false
+opt_finish=false
+opt_help=false
+opt_help_all=false
+opt_silent=:
+opt_warning=:
+opt_verbose=:
+opt_silent=false
+opt_verbose=false
+
+
+# Parse options once, thoroughly. This comes as soon as possible in the
+# script to make things like `--version' happen as quickly as we can.
+{
+ # this just eases exit handling
+ while test $# -gt 0; do
+ opt="$1"
+ shift
+ case $opt in
+ --debug|-x) opt_debug='set -x'
+ func_echo "enabling shell trace mode"
+ $opt_debug
+ ;;
+ --dry-run|--dryrun|-n)
+ opt_dry_run=:
+ ;;
+ --config)
+ opt_config=:
+func_config
+ ;;
+ --dlopen|-dlopen)
+ optarg="$1"
+ opt_dlopen="${opt_dlopen+$opt_dlopen
+}$optarg"
+ shift
+ ;;
+ --preserve-dup-deps)
+ opt_preserve_dup_deps=:
+ ;;
+ --features)
+ opt_features=:
+func_features
+ ;;
+ --finish)
+ opt_finish=:
+set dummy --mode finish ${1+"$@"}; shift
+ ;;
+ --help)
+ opt_help=:
+ ;;
+ --help-all)
+ opt_help_all=:
+opt_help=': help-all'
+ ;;
+ --mode)
+ test $# = 0 && func_missing_arg $opt && break
+ optarg="$1"
+ opt_mode="$optarg"
+case $optarg in
+ # Valid mode arguments:
+ clean|compile|execute|finish|install|link|relink|uninstall) ;;
+
+ # Catch anything else as an error
+ *) func_error "invalid argument for $opt"
+ exit_cmd=exit
+ break
+ ;;
+esac
+ shift
+ ;;
+ --no-silent|--no-quiet)
+ opt_silent=false
+func_append preserve_args " $opt"
+ ;;
+ --no-warning|--no-warn)
+ opt_warning=false
+func_append preserve_args " $opt"
+ ;;
+ --no-verbose)
+ opt_verbose=false
+func_append preserve_args " $opt"
+ ;;
+ --silent|--quiet)
+ opt_silent=:
+func_append preserve_args " $opt"
+ opt_verbose=false
+ ;;
+ --verbose|-v)
+ opt_verbose=:
+func_append preserve_args " $opt"
+opt_silent=false
+ ;;
+ --tag)
+ test $# = 0 && func_missing_arg $opt && break
+ optarg="$1"
+ opt_tag="$optarg"
+func_append preserve_args " $opt $optarg"
+func_enable_tag "$optarg"
+ shift
+ ;;
+
+ -\?|-h) func_usage ;;
+ --help) func_help ;;
+ --version) func_version ;;
+
+ # Separate optargs to long options:
+ --*=*)
+ func_split_long_opt "$opt"
+ set dummy "$func_split_long_opt_name" "$func_split_long_opt_arg" ${1+"$@"}
+ shift
+ ;;
+
+ # Separate non-argument short options:
+ -\?*|-h*|-n*|-v*)
+ func_split_short_opt "$opt"
+ set dummy "$func_split_short_opt_name" "-$func_split_short_opt_arg" ${1+"$@"}
+ shift
+ ;;
+
+ --) break ;;
+ -*) func_fatal_help "unrecognized option \`$opt'" ;;
+ *) set dummy "$opt" ${1+"$@"}; shift; break ;;
esac
+ done
+
+ # Validate options:
+
+ # save first non-option argument
+ if test "$#" -gt 0; then
+ nonopt="$opt"
+ shift
+ fi
+
+ # preserve --debug
+ test "$opt_debug" = : || func_append preserve_args " --debug"
+
+ case $host in
+ *cygwin* | *mingw* | *pw32* | *cegcc*)
+ # don't eliminate duplications in $postdeps and $predeps
+ opt_duplicate_compiler_generated_deps=:
+ ;;
+ *)
+ opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps
+ ;;
+ esac
+
+ $opt_help || {
+ # Sanity checks first:
+ func_check_version_match
+
+ if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
+ func_fatal_configuration "not configured to build any kind of library"
+ fi
+
+ # Darwin sucks
+ eval std_shrext=\"$shrext_cmds\"
+
+ # Only execute mode is allowed to have -dlopen flags.
+ if test -n "$opt_dlopen" && test "$opt_mode" != execute; then
+ func_error "unrecognized option \`-dlopen'"
+ $ECHO "$help" 1>&2
+ exit $EXIT_FAILURE
+ fi
+
+ # Change the help message to a mode-specific one.
+ generic_help="$help"
+ help="Try \`$progname --help --mode=$opt_mode' for more information."
+ }
+
+
+ # Bail if the options were screwed
+ $exit_cmd $EXIT_FAILURE
+}
+
+
+
+
+## ----------- ##
+## Main. ##
+## ----------- ##
+
+# func_lalib_p file
+# True iff FILE is a libtool `.la' library or `.lo' object file.
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_lalib_p ()
+{
+ test -f "$1" &&
+ $SED -e 4q "$1" 2>/dev/null \
+ | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
+}
+
+# func_lalib_unsafe_p file
+# True iff FILE is a libtool `.la' library or `.lo' object file.
+# This function implements the same check as func_lalib_p without
+# resorting to external programs. To this end, it redirects stdin and
+# closes it afterwards, without saving the original file descriptor.
+# As a safety measure, use it only where a negative result would be
+# fatal anyway. Works if `file' does not exist.
+func_lalib_unsafe_p ()
+{
+ lalib_p=no
+ if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then
+ for lalib_p_l in 1 2 3 4
+ do
+ read lalib_p_line
+ case "$lalib_p_line" in
+ \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;;
+ esac
+ done
+ exec 0<&5 5<&-
+ fi
+ test "$lalib_p" = yes
+}
+
+# func_ltwrapper_script_p file
+# True iff FILE is a libtool wrapper script
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_script_p ()
+{
+ func_lalib_p "$1"
+}
+
+# func_ltwrapper_executable_p file
+# True iff FILE is a libtool wrapper executable
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_executable_p ()
+{
+ func_ltwrapper_exec_suffix=
+ case $1 in
+ *.exe) ;;
+ *) func_ltwrapper_exec_suffix=.exe ;;
+ esac
+ $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1
+}
+
+# func_ltwrapper_scriptname file
+# Assumes file is an ltwrapper_executable
+# uses $file to determine the appropriate filename for a
+# temporary ltwrapper_script.
+func_ltwrapper_scriptname ()
+{
+ func_dirname_and_basename "$1" "" "."
+ func_stripname '' '.exe' "$func_basename_result"
+ func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"
+}
+
+# func_ltwrapper_p file
+# True iff FILE is a libtool wrapper script or wrapper executable
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_p ()
+{
+ func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1"
+}
+
+
+# func_execute_cmds commands fail_cmd
+# Execute tilde-delimited COMMANDS.
+# If FAIL_CMD is given, eval that upon failure.
+# FAIL_CMD may read-access the current command in variable CMD!
+func_execute_cmds ()
+{
+ $opt_debug
+ save_ifs=$IFS; IFS='~'
+ for cmd in $1; do
+ IFS=$save_ifs
+ eval cmd=\"$cmd\"
+ func_show_eval "$cmd" "${2-:}"
+ done
+ IFS=$save_ifs
+}
+
+
+# func_source file
+# Source FILE, adding directory component if necessary.
+# Note that it is not necessary on cygwin/mingw to append a dot to
+# FILE even if both FILE and FILE.exe exist: automatic-append-.exe
+# behavior happens only for exec(3), not for open(2)! Also, sourcing
+# `FILE.' does not work on cygwin managed mounts.
+func_source ()
+{
+ $opt_debug
+ case $1 in
+ */* | *\\*) . "$1" ;;
+ *) . "./$1" ;;
+ esac
+}
+
+
+# func_resolve_sysroot PATH
+# Replace a leading = in PATH with a sysroot. Store the result into
+# func_resolve_sysroot_result
+func_resolve_sysroot ()
+{
+ func_resolve_sysroot_result=$1
+ case $func_resolve_sysroot_result in
+ =*)
+ func_stripname '=' '' "$func_resolve_sysroot_result"
+ func_resolve_sysroot_result=$lt_sysroot$func_stripname_result
;;
esac
- $echo $win32_libid_type
}
+# func_replace_sysroot PATH
+# If PATH begins with the sysroot, replace it with = and
+# store the result into func_replace_sysroot_result.
+func_replace_sysroot ()
+{
+ case "$lt_sysroot:$1" in
+ ?*:"$lt_sysroot"*)
+ func_stripname "$lt_sysroot" '' "$1"
+ func_replace_sysroot_result="=$func_stripname_result"
+ ;;
+ *)
+ # Including no sysroot.
+ func_replace_sysroot_result=$1
+ ;;
+ esac
+}
# func_infer_tag arg
# Infer tagged configuration to use if any are available and
@@ -250,9 +1374,11 @@
# arg is usually of the form 'gcc ...'
func_infer_tag ()
{
+ $opt_debug
+
# FreeBSD-specific: where we install compilers with non-standard names
- tag_compilers_CC="*cc cc* *gcc gcc*"
- tag_compilers_CXX="*c++ c++* *g++ g++*"
+ tag_compilers_CC="*cc cc* *gcc gcc* clang"
+ tag_compilers_CXX="*c++ c++* *g++ g++* clang++"
base_compiler=`set -- "$@"; echo $1`
# If $tagname isn't set, then try to infer if the default "CC" tag applies
@@ -267,36 +1393,32 @@
if test -n "$available_tags" && test -z "$tagname"; then
CC_quoted=
for arg in $CC; do
- case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- arg="\"$arg\""
- ;;
- esac
- CC_quoted="$CC_quoted $arg"
+ func_append_quoted CC_quoted "$arg"
done
+ CC_expanded=`func_echo_all $CC`
+ CC_quoted_expanded=`func_echo_all $CC_quoted`
case $@ in
# Blanks in the command may have been stripped by the calling shell,
# but not from the CC environment variable when configure was run.
- " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) ;;
+ " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
+ " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;;
# Blanks at the start of $base_compile will cause this to fail
# if we don't check for them as well.
*)
for z in $available_tags; do
- if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
+ if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
# Evaluate the configuration.
eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
CC_quoted=
for arg in $CC; do
- # Double-quote args containing other shell metacharacters.
- case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- arg="\"$arg\""
- ;;
- esac
- CC_quoted="$CC_quoted $arg"
- done
+ # Double-quote args containing other shell metacharacters.
+ func_append_quoted CC_quoted "$arg"
+ done
+ CC_expanded=`func_echo_all $CC`
+ CC_quoted_expanded=`func_echo_all $CC_quoted`
case "$@ " in
- " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*)
+ " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
+ " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*)
# The compiler in the base compile command matches
# the one in the tagged configuration.
# Assume this is the tagged configuration we want.
@@ -325,11 +1447,10 @@
# was found and let the user know that the "--tag" command
# line option must be used.
if test -z "$tagname"; then
- $echo "$modename: unable to infer tagged configuration"
- $echo "$modename: specify a tag with \`--tag'" 1>&2
- exit $EXIT_FAILURE
-# else
-# $echo "$modename: using $tagname tagged configuration"
+ func_echo "unable to infer tagged configuration"
+ func_fatal_error "specify a tag with \`--tag'"
+# else
+# func_verbose "using $tagname tagged configuration"
fi
;;
esac
@@ -337,354 +1458,528 @@
}
-# func_extract_an_archive dir oldlib
-func_extract_an_archive ()
+
+# func_write_libtool_object output_name pic_name nonpic_name
+# Create a libtool object file (analogous to a ".la" file),
+# but don't create it if we're doing a dry run.
+func_write_libtool_object ()
{
- f_ex_an_ar_dir="$1"; shift
- f_ex_an_ar_oldlib="$1"
+ write_libobj=${1}
+ if test "$build_libtool_libs" = yes; then
+ write_lobj=\'${2}\'
+ else
+ write_lobj=none
+ fi
- $show "(cd $f_ex_an_ar_dir && $AR x $f_ex_an_ar_oldlib)"
- $run eval "(cd \$f_ex_an_ar_dir && $AR x \$f_ex_an_ar_oldlib)" || exit $?
- if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
- :
+ if test "$build_old_libs" = yes; then
+ write_oldobj=\'${3}\'
else
- $echo "$modename: ERROR: object name conflicts: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" 1>&2
- exit $EXIT_FAILURE
+ write_oldobj=none
fi
+
+ $opt_dry_run || {
+ cat >${write_libobj}T <<EOF
+# $write_libobj - a libtool object file
+# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+
+# Name of the PIC object.
+pic_object=$write_lobj
+
+# Name of the non-PIC object
+non_pic_object=$write_oldobj
+
+EOF
+ $MV "${write_libobj}T" "${write_libobj}"
+ }
}
-# func_extract_archives gentop oldlib ...
-func_extract_archives ()
+
+##################################################
+# FILE NAME AND PATH CONVERSION HELPER FUNCTIONS #
+##################################################
+
+# func_convert_core_file_wine_to_w32 ARG
+# Helper function used by file name conversion functions when $build is *nix,
+# and $host is mingw, cygwin, or some other w32 environment. Relies on a
+# correctly configured wine environment available, with the winepath program
+# in $build's $PATH.
+#
+# ARG is the $build file name to be converted to w32 format.
+# Result is available in $func_convert_core_file_wine_to_w32_result, and will
+# be empty on error (or when ARG is empty)
+func_convert_core_file_wine_to_w32 ()
{
- my_gentop="$1"; shift
- my_oldlibs=${1+"$@"}
- my_oldobjs=""
- my_xlib=""
- my_xabs=""
- my_xdir=""
- my_status=""
-
- $show "${rm}r $my_gentop"
- $run ${rm}r "$my_gentop"
- $show "$mkdir $my_gentop"
- $run $mkdir "$my_gentop"
- my_status=$?
- if test "$my_status" -ne 0 && test ! -d "$my_gentop"; then
- exit $my_status
+ $opt_debug
+ func_convert_core_file_wine_to_w32_result="$1"
+ if test -n "$1"; then
+ # Unfortunately, winepath does not exit with a non-zero error code, so we
+ # are forced to check the contents of stdout. On the other hand, if the
+ # command is not found, the shell will set an exit code of 127 and print
+ # *an error message* to stdout. So we must check for both error code of
+ # zero AND non-empty stdout, which explains the odd construction:
+ func_convert_core_file_wine_to_w32_tmp=`winepath -w "$1" 2>/dev/null`
+ if test "$?" -eq 0 && test -n "${func_convert_core_file_wine_to_w32_tmp}"; then
+ func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" |
+ $SED -e "$lt_sed_naive_backslashify"`
+ else
+ func_convert_core_file_wine_to_w32_result=
fi
+ fi
+}
+# end: func_convert_core_file_wine_to_w32
- for my_xlib in $my_oldlibs; do
- # Extract the objects.
- case $my_xlib in
- [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
- *) my_xabs=`pwd`"/$my_xlib" ;;
- esac
- my_xlib=`$echo "X$my_xlib" | $Xsed -e 's%^.*/%%'`
- my_xlib_u=$my_xlib
- while :; do
- case " $extracted_archives " in
- *" $my_xlib_u "*)
- extracted_serial=`expr $extracted_serial + 1`
- my_xlib_u=lt$extracted_serial-$my_xlib ;;
- *) break ;;
- esac
- done
- extracted_archives="$extracted_archives $my_xlib_u"
- my_xdir="$my_gentop/$my_xlib_u"
- $show "${rm}r $my_xdir"
- $run ${rm}r "$my_xdir"
- $show "$mkdir $my_xdir"
- $run $mkdir "$my_xdir"
- exit_status=$?
- if test "$exit_status" -ne 0 && test ! -d "$my_xdir"; then
- exit $exit_status
+# func_convert_core_path_wine_to_w32 ARG
+# Helper function used by path conversion functions when $build is *nix, and
+# $host is mingw, cygwin, or some other w32 environment. Relies on a correctly
+# configured wine environment available, with the winepath program in $build's
+# $PATH. Assumes ARG has no leading or trailing path separator characters.
+#
+# ARG is path to be converted from $build format to win32.
+# Result is available in $func_convert_core_path_wine_to_w32_result.
+# Unconvertible file (directory) names in ARG are skipped; if no directory names
+# are convertible, then the result may be empty.
+func_convert_core_path_wine_to_w32 ()
+{
+ $opt_debug
+ # unfortunately, winepath doesn't convert paths, only file names
+ func_convert_core_path_wine_to_w32_result=""
+ if test -n "$1"; then
+ oldIFS=$IFS
+ IFS=:
+ for func_convert_core_path_wine_to_w32_f in $1; do
+ IFS=$oldIFS
+ func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f"
+ if test -n "$func_convert_core_file_wine_to_w32_result" ; then
+ if test -z "$func_convert_core_path_wine_to_w32_result"; then
+ func_convert_core_path_wine_to_w32_result="$func_convert_core_file_wine_to_w32_result"
+ else
+ func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result"
+ fi
fi
- case $host in
- *-darwin*)
- $show "Extracting $my_xabs"
- # Do not bother doing anything if just a dry run
- if test -z "$run"; then
- darwin_orig_dir=`pwd`
- cd $my_xdir || exit $?
- darwin_archive=$my_xabs
- darwin_curdir=`pwd`
- darwin_base_archive=`$echo "X$darwin_archive" | $Xsed -e 's%^.*/%%'`
- darwin_arches=`lipo -info "$darwin_archive" 2>/dev/null | $EGREP Architectures 2>/dev/null`
- if test -n "$darwin_arches"; then
- darwin_arches=`echo "$darwin_arches" | $SED -e 's/.*are://'`
- darwin_arch=
- $show "$darwin_base_archive has multiple architectures $darwin_arches"
- for darwin_arch in $darwin_arches ; do
- mkdir -p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
- lipo -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
- cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
- func_extract_an_archive "`pwd`" "${darwin_base_archive}"
- cd "$darwin_curdir"
- $rm "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
- done # $darwin_arches
- ## Okay now we have a bunch of thin objects, gotta fatten them up :)
- darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print| xargs basename | sort -u | $NL2SP`
- darwin_file=
- darwin_files=
- for darwin_file in $darwin_filelist; do
- darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
- lipo -create -output "$darwin_file" $darwin_files
- done # $darwin_filelist
- ${rm}r unfat-$$
- cd "$darwin_orig_dir"
- else
- cd "$darwin_orig_dir"
- func_extract_an_archive "$my_xdir" "$my_xabs"
- fi # $darwin_arches
- fi # $run
- ;;
- *)
- func_extract_an_archive "$my_xdir" "$my_xabs"
- ;;
- esac
- my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
done
- func_extract_archives_result="$my_oldobjs"
+ IFS=$oldIFS
+ fi
}
-# End of Shell function definitions
-#####################################
+# end: func_convert_core_path_wine_to_w32
-# Darwin sucks
-eval std_shrext=\"$shrext_cmds\"
-disable_libs=no
+# func_cygpath ARGS...
+# Wrapper around calling the cygpath program via LT_CYGPATH. This is used when
+# when (1) $build is *nix and Cygwin is hosted via a wine environment; or (2)
+# $build is MSYS and $host is Cygwin, or (3) $build is Cygwin. In case (1) or
+# (2), returns the Cygwin file name or path in func_cygpath_result (input
+# file name or path is assumed to be in w32 format, as previously converted
+# from $build's *nix or MSYS format). In case (3), returns the w32 file name
+# or path in func_cygpath_result (input file name or path is assumed to be in
+# Cygwin format). Returns an empty string on error.
+#
+# ARGS are passed to cygpath, with the last one being the file name or path to
+# be converted.
+#
+# Specify the absolute *nix (or w32) name to cygpath in the LT_CYGPATH
+# environment variable; do not put it in $PATH.
+func_cygpath ()
+{
+ $opt_debug
+ if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then
+ func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null`
+ if test "$?" -ne 0; then
+ # on failure, ensure result is empty
+ func_cygpath_result=
+ fi
+ else
+ func_cygpath_result=
+ func_error "LT_CYGPATH is empty or specifies non-existent file: \`$LT_CYGPATH'"
+ fi
+}
+#end: func_cygpath
-# Parse our command line options once, thoroughly.
-while test "$#" -gt 0
-do
- arg="$1"
- shift
- case $arg in
- -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;;
- *) optarg= ;;
+# func_convert_core_msys_to_w32 ARG
+# Convert file name or path ARG from MSYS format to w32 format. Return
+# result in func_convert_core_msys_to_w32_result.
+func_convert_core_msys_to_w32 ()
+{
+ $opt_debug
+ # awkward: cmd appends spaces to result
+ func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null |
+ $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"`
+}
+#end: func_convert_core_msys_to_w32
+
+
+# func_convert_file_check ARG1 ARG2
+# Verify that ARG1 (a file name in $build format) was converted to $host
+# format in ARG2. Otherwise, emit an error message, but continue (resetting
+# func_to_host_file_result to ARG1).
+func_convert_file_check ()
+{
+ $opt_debug
+ if test -z "$2" && test -n "$1" ; then
+ func_error "Could not determine host file name corresponding to"
+ func_error " \`$1'"
+ func_error "Continuing, but uninstalled executables may not work."
+ # Fallback:
+ func_to_host_file_result="$1"
+ fi
+}
+# end func_convert_file_check
+
+
+# func_convert_path_check FROM_PATHSEP TO_PATHSEP FROM_PATH TO_PATH
+# Verify that FROM_PATH (a path in $build format) was converted to $host
+# format in TO_PATH. Otherwise, emit an error message, but continue, resetting
+# func_to_host_file_result to a simplistic fallback value (see below).
+func_convert_path_check ()
+{
+ $opt_debug
+ if test -z "$4" && test -n "$3"; then
+ func_error "Could not determine the host path corresponding to"
+ func_error " \`$3'"
+ func_error "Continuing, but uninstalled executables may not work."
+ # Fallback. This is a deliberately simplistic "conversion" and
+ # should not be "improved". See libtool.info.
+ if test "x$1" != "x$2"; then
+ lt_replace_pathsep_chars="s|$1|$2|g"
+ func_to_host_path_result=`echo "$3" |
+ $SED -e "$lt_replace_pathsep_chars"`
+ else
+ func_to_host_path_result="$3"
+ fi
+ fi
+}
+# end func_convert_path_check
+
+
+# func_convert_path_front_back_pathsep FRONTPAT BACKPAT REPL ORIG
+# Modifies func_to_host_path_result by prepending REPL if ORIG matches FRONTPAT
+# and appending REPL if ORIG matches BACKPAT.
+func_convert_path_front_back_pathsep ()
+{
+ $opt_debug
+ case $4 in
+ $1 ) func_to_host_path_result="$3$func_to_host_path_result"
+ ;;
esac
+ case $4 in
+ $2 ) func_append func_to_host_path_result "$3"
+ ;;
+ esac
+}
+# end func_convert_path_front_back_pathsep
- # If the previous option needs an argument, assign it.
- if test -n "$prev"; then
- case $prev in
- execute_dlfiles)
- execute_dlfiles="$execute_dlfiles $arg"
- ;;
- tag)
- tagname="$arg"
- preserve_args="${preserve_args}=$arg"
- # Check whether tagname contains only valid characters
- case $tagname in
- *[!-_A-Za-z0-9,/]*)
- $echo "$progname: invalid tag name: $tagname" 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
+##################################################
+# $build to $host FILE NAME CONVERSION FUNCTIONS #
+##################################################
+# invoked via `$to_host_file_cmd ARG'
+#
+# In each case, ARG is the path to be converted from $build to $host format.
+# Result will be available in $func_to_host_file_result.
- case $tagname in
- CC)
- # Don't test for the "default" C tag, as we know, it's there, but
- # not specially marked.
- ;;
- *)
- if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$progpath" > /dev/null; then
- taglist="$taglist $tagname"
- # Evaluate the configuration.
- eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $progpath`"
- else
- $echo "$progname: ignoring unknown tag $tagname" 1>&2
- fi
- ;;
- esac
+
+# func_to_host_file ARG
+# Converts the file name ARG from $build format to $host format. Return result
+# in func_to_host_file_result.
+func_to_host_file ()
+{
+ $opt_debug
+ $to_host_file_cmd "$1"
+}
+# end func_to_host_file
+
+
+# func_to_tool_file ARG LAZY
+# converts the file name ARG from $build format to toolchain format. Return
+# result in func_to_tool_file_result. If the conversion in use is listed
+# in (the comma separated) LAZY, no conversion takes place.
+func_to_tool_file ()
+{
+ $opt_debug
+ case ,$2, in
+ *,"$to_tool_file_cmd",*)
+ func_to_tool_file_result=$1
;;
*)
- eval "$prev=\$arg"
+ $to_tool_file_cmd "$1"
+ func_to_tool_file_result=$func_to_host_file_result
;;
- esac
+ esac
+}
+# end func_to_tool_file
- prev=
- prevopt=
- continue
+
+# func_convert_file_noop ARG
+# Copy ARG to func_to_host_file_result.
+func_convert_file_noop ()
+{
+ func_to_host_file_result="$1"
+}
+# end func_convert_file_noop
+
+
+# func_convert_file_msys_to_w32 ARG
+# Convert file name ARG from (mingw) MSYS to (mingw) w32 format; automatic
+# conversion to w32 is not available inside the cwrapper. Returns result in
+# func_to_host_file_result.
+func_convert_file_msys_to_w32 ()
+{
+ $opt_debug
+ func_to_host_file_result="$1"
+ if test -n "$1"; then
+ func_convert_core_msys_to_w32 "$1"
+ func_to_host_file_result="$func_convert_core_msys_to_w32_result"
fi
+ func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_msys_to_w32
- # Have we seen a non-optional argument yet?
- case $arg in
- --help)
- show_help=yes
- ;;
- --version)
- echo "\
-$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP
+# func_convert_file_cygwin_to_w32 ARG
+# Convert file name ARG from Cygwin to w32 format. Returns result in
+# func_to_host_file_result.
+func_convert_file_cygwin_to_w32 ()
+{
+ $opt_debug
+ func_to_host_file_result="$1"
+ if test -n "$1"; then
+ # because $build is cygwin, we call "the" cygpath in $PATH; no need to use
+ # LT_CYGPATH in this case.
+ func_to_host_file_result=`cygpath -m "$1"`
+ fi
+ func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_cygwin_to_w32
-Copyright (C) 2008 Free Software Foundation, Inc.
-This is free software; see the source for copying conditions. There is NO
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
- exit $?
- ;;
- --config)
- ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $progpath
- # Now print the configurations for the tags.
- for tagname in $taglist; do
- ${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$progpath"
- done
- exit $?
- ;;
+# func_convert_file_nix_to_w32 ARG
+# Convert file name ARG from *nix to w32 format. Requires a wine environment
+# and a working winepath. Returns result in func_to_host_file_result.
+func_convert_file_nix_to_w32 ()
+{
+ $opt_debug
+ func_to_host_file_result="$1"
+ if test -n "$1"; then
+ func_convert_core_file_wine_to_w32 "$1"
+ func_to_host_file_result="$func_convert_core_file_wine_to_w32_result"
+ fi
+ func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_nix_to_w32
- --debug)
- $echo "$progname: enabling shell trace mode"
- set -x
- preserve_args="$preserve_args $arg"
- ;;
- --dry-run | -n)
- run=:
- ;;
+# func_convert_file_msys_to_cygwin ARG
+# Convert file name ARG from MSYS to Cygwin format. Requires LT_CYGPATH set.
+# Returns result in func_to_host_file_result.
+func_convert_file_msys_to_cygwin ()
+{
+ $opt_debug
+ func_to_host_file_result="$1"
+ if test -n "$1"; then
+ func_convert_core_msys_to_w32 "$1"
+ func_cygpath -u "$func_convert_core_msys_to_w32_result"
+ func_to_host_file_result="$func_cygpath_result"
+ fi
+ func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_msys_to_cygwin
- --features)
- $echo "host: $host"
- if test "$build_libtool_libs" = yes; then
- $echo "enable shared libraries"
- else
- $echo "disable shared libraries"
- fi
- if test "$build_old_libs" = yes; then
- $echo "enable static libraries"
- else
- $echo "disable static libraries"
- fi
- exit $?
- ;;
- --finish) mode="finish" ;;
+# func_convert_file_nix_to_cygwin ARG
+# Convert file name ARG from *nix to Cygwin format. Requires Cygwin installed
+# in a wine environment, working winepath, and LT_CYGPATH set. Returns result
+# in func_to_host_file_result.
+func_convert_file_nix_to_cygwin ()
+{
+ $opt_debug
+ func_to_host_file_result="$1"
+ if test -n "$1"; then
+ # convert from *nix to w32, then use cygpath to convert from w32 to cygwin.
+ func_convert_core_file_wine_to_w32 "$1"
+ func_cygpath -u "$func_convert_core_file_wine_to_w32_result"
+ func_to_host_file_result="$func_cygpath_result"
+ fi
+ func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_nix_to_cygwin
- --mode) prevopt="--mode" prev=mode ;;
- --mode=*) mode="$optarg" ;;
- --preserve-dup-deps) duplicate_deps="yes" ;;
+#############################################
+# $build to $host PATH CONVERSION FUNCTIONS #
+#############################################
+# invoked via `$to_host_path_cmd ARG'
+#
+# In each case, ARG is the path to be converted from $build to $host format.
+# The result will be available in $func_to_host_path_result.
+#
+# Path separators are also converted from $build format to $host format. If
+# ARG begins or ends with a path separator character, it is preserved (but
+# converted to $host format) on output.
+#
+# All path conversion functions are named using the following convention:
+# file name conversion function : func_convert_file_X_to_Y ()
+# path conversion function : func_convert_path_X_to_Y ()
+# where, for any given $build/$host combination the 'X_to_Y' value is the
+# same. If conversion functions are added for new $build/$host combinations,
+# the two new functions must follow this pattern, or func_init_to_host_path_cmd
+# will break.
- --quiet | --silent)
- show=:
- preserve_args="$preserve_args $arg"
- ;;
- --tag)
- prevopt="--tag"
- prev=tag
- preserve_args="$preserve_args --tag"
- ;;
- --tag=*)
- set tag "$optarg" ${1+"$@"}
- shift
- prev=tag
- preserve_args="$preserve_args --tag"
- ;;
+# func_init_to_host_path_cmd
+# Ensures that function "pointer" variable $to_host_path_cmd is set to the
+# appropriate value, based on the value of $to_host_file_cmd.
+to_host_path_cmd=
+func_init_to_host_path_cmd ()
+{
+ $opt_debug
+ if test -z "$to_host_path_cmd"; then
+ func_stripname 'func_convert_file_' '' "$to_host_file_cmd"
+ to_host_path_cmd="func_convert_path_${func_stripname_result}"
+ fi
+}
- -dlopen)
- prevopt="-dlopen"
- prev=execute_dlfiles
- ;;
- -*)
- $echo "$modename: unrecognized option \`$arg'" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- ;;
+# func_to_host_path ARG
+# Converts the path ARG from $build format to $host format. Return result
+# in func_to_host_path_result.
+func_to_host_path ()
+{
+ $opt_debug
+ func_init_to_host_path_cmd
+ $to_host_path_cmd "$1"
+}
+# end func_to_host_path
- *)
- nonopt="$arg"
- break
- ;;
- esac
-done
-if test -n "$prevopt"; then
- $echo "$modename: option \`$prevopt' requires an argument" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
-fi
+# func_convert_path_noop ARG
+# Copy ARG to func_to_host_path_result.
+func_convert_path_noop ()
+{
+ func_to_host_path_result="$1"
+}
+# end func_convert_path_noop
-case $disable_libs in
-no)
- ;;
-shared)
- build_libtool_libs=no
- build_old_libs=yes
- ;;
-static)
- build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
- ;;
-esac
-# If this variable is set in any of the actions, the command in it
-# will be execed at the end. This prevents here-documents from being
-# left over by shells.
-exec_cmd=
+# func_convert_path_msys_to_w32 ARG
+# Convert path ARG from (mingw) MSYS to (mingw) w32 format; automatic
+# conversion to w32 is not available inside the cwrapper. Returns result in
+# func_to_host_path_result.
+func_convert_path_msys_to_w32 ()
+{
+ $opt_debug
+ func_to_host_path_result="$1"
+ if test -n "$1"; then
+ # Remove leading and trailing path separator characters from ARG. MSYS
+ # behavior is inconsistent here; cygpath turns them into '.;' and ';.';
+ # and winepath ignores them completely.
+ func_stripname : : "$1"
+ func_to_host_path_tmp1=$func_stripname_result
+ func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
+ func_to_host_path_result="$func_convert_core_msys_to_w32_result"
+ func_convert_path_check : ";" \
+ "$func_to_host_path_tmp1" "$func_to_host_path_result"
+ func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
+ fi
+}
+# end func_convert_path_msys_to_w32
-if test -z "$show_help"; then
- # Infer the operation mode.
- if test -z "$mode"; then
- $echo "*** Warning: inferring the mode of operation is deprecated." 1>&2
- $echo "*** Future versions of Libtool will require --mode=MODE be specified." 1>&2
- case $nonopt in
- *cc | cc* | *++ | gcc* | *-gcc* | g++* | xlc*)
- mode=link
- for arg
- do
- case $arg in
- -c)
- mode=compile
- break
- ;;
- esac
- done
- ;;
- *db | *dbx | *strace | *truss)
- mode=execute
- ;;
- *install*|cp|mv)
- mode=install
- ;;
- *rm)
- mode=uninstall
- ;;
- *)
- # If we have no mode, but dlfiles were specified, then do execute mode.
- test -n "$execute_dlfiles" && mode=execute
+# func_convert_path_cygwin_to_w32 ARG
+# Convert path ARG from Cygwin to w32 format. Returns result in
+# func_to_host_file_result.
+func_convert_path_cygwin_to_w32 ()
+{
+ $opt_debug
+ func_to_host_path_result="$1"
+ if test -n "$1"; then
+ # See func_convert_path_msys_to_w32:
+ func_stripname : : "$1"
+ func_to_host_path_tmp1=$func_stripname_result
+ func_to_host_path_result=`cygpath -m -p "$func_to_host_path_tmp1"`
+ func_convert_path_check : ";" \
+ "$func_to_host_path_tmp1" "$func_to_host_path_result"
+ func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
+ fi
+}
+# end func_convert_path_cygwin_to_w32
- # Just use the default operation mode.
- if test -z "$mode"; then
- if test -n "$nonopt"; then
- $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2
- else
- $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2
- fi
- fi
- ;;
- esac
+
+# func_convert_path_nix_to_w32 ARG
+# Convert path ARG from *nix to w32 format. Requires a wine environment and
+# a working winepath. Returns result in func_to_host_file_result.
+func_convert_path_nix_to_w32 ()
+{
+ $opt_debug
+ func_to_host_path_result="$1"
+ if test -n "$1"; then
+ # See func_convert_path_msys_to_w32:
+ func_stripname : : "$1"
+ func_to_host_path_tmp1=$func_stripname_result
+ func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
+ func_to_host_path_result="$func_convert_core_path_wine_to_w32_result"
+ func_convert_path_check : ";" \
+ "$func_to_host_path_tmp1" "$func_to_host_path_result"
+ func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
fi
+}
+# end func_convert_path_nix_to_w32
- # Only execute mode is allowed to have -dlopen flags.
- if test -n "$execute_dlfiles" && test "$mode" != execute; then
- $echo "$modename: unrecognized option \`-dlopen'" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
+
+# func_convert_path_msys_to_cygwin ARG
+# Convert path ARG from MSYS to Cygwin format. Requires LT_CYGPATH set.
+# Returns result in func_to_host_file_result.
+func_convert_path_msys_to_cygwin ()
+{
+ $opt_debug
+ func_to_host_path_result="$1"
+ if test -n "$1"; then
+ # See func_convert_path_msys_to_w32:
+ func_stripname : : "$1"
+ func_to_host_path_tmp1=$func_stripname_result
+ func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
+ func_cygpath -u -p "$func_convert_core_msys_to_w32_result"
+ func_to_host_path_result="$func_cygpath_result"
+ func_convert_path_check : : \
+ "$func_to_host_path_tmp1" "$func_to_host_path_result"
+ func_convert_path_front_back_pathsep ":*" "*:" : "$1"
fi
+}
+# end func_convert_path_msys_to_cygwin
- # Change the help message to a mode-specific one.
- generic_help="$help"
- help="Try \`$modename --help --mode=$mode' for more information."
- # These modes are in order of execution frequency so that they run quickly.
- case $mode in
- # libtool compile mode
- compile)
- modename="$modename: compile"
+# func_convert_path_nix_to_cygwin ARG
+# Convert path ARG from *nix to Cygwin format. Requires Cygwin installed in a
+# a wine environment, working winepath, and LT_CYGPATH set. Returns result in
+# func_to_host_file_result.
+func_convert_path_nix_to_cygwin ()
+{
+ $opt_debug
+ func_to_host_path_result="$1"
+ if test -n "$1"; then
+ # Remove leading and trailing path separator characters from
+ # ARG. msys behavior is inconsistent here, cygpath turns them
+ # into '.;' and ';.', and winepath ignores them completely.
+ func_stripname : : "$1"
+ func_to_host_path_tmp1=$func_stripname_result
+ func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
+ func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result"
+ func_to_host_path_result="$func_cygpath_result"
+ func_convert_path_check : : \
+ "$func_to_host_path_tmp1" "$func_to_host_path_result"
+ func_convert_path_front_back_pathsep ":*" "*:" : "$1"
+ fi
+}
+# end func_convert_path_nix_to_cygwin
+
+
+# func_mode_compile arg...
+func_mode_compile ()
+{
+ $opt_debug
# Get the compilation command and the source file.
base_compile=
srcfile="$nonopt" # always keep a non-empty value in "srcfile"
@@ -693,6 +1988,7 @@
arg_mode=normal
libobj=
later=
+ pie_flag=
for arg
do
@@ -713,19 +2009,22 @@
# Accept any command-line options.
case $arg in
-o)
- if test -n "$libobj" ; then
- $echo "$modename: you cannot specify \`-o' more than once" 1>&2
- exit $EXIT_FAILURE
- fi
+ test -n "$libobj" && \
+ func_fatal_error "you cannot specify \`-o' more than once"
arg_mode=target
continue
;;
- -static | -prefer-pic | -prefer-non-pic)
- later="$later $arg"
+ -pie | -fpie | -fPIE)
+ func_append pie_flag " $arg"
continue
;;
+ -shared | -static | -prefer-pic | -prefer-non-pic)
+ func_append later " $arg"
+ continue
+ ;;
+
-no-suppress)
suppress_opt=no
continue
@@ -737,31 +2036,24 @@
;; # replaced later. I would guess that would be a bug.
-Wc,*)
- args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"`
+ func_stripname '-Wc,' '' "$arg"
+ args=$func_stripname_result
lastarg=
save_ifs="$IFS"; IFS=','
- for arg in $args; do
+ for arg in $args; do
IFS="$save_ifs"
-
- # Double-quote args containing other shell metacharacters.
- # Many Bourne shells cannot handle close brackets correctly
- # in scan sets, so we specify it separately.
- case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- arg="\"$arg\""
- ;;
- esac
- lastarg="$lastarg $arg"
+ func_append_quoted lastarg "$arg"
done
IFS="$save_ifs"
- lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"`
+ func_stripname ' ' '' "$lastarg"
+ lastarg=$func_stripname_result
# Add the arguments to base_compile.
- base_compile="$base_compile $lastarg"
+ func_append base_compile " $lastarg"
continue
;;
- * )
+ *)
# Accept the current argument as the source file.
# The previous "srcfile" becomes the current argument.
#
@@ -773,66 +2065,41 @@
esac # case $arg_mode
# Aesthetically quote the previous argument.
- lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"`
-
- case $lastarg in
- # Double-quote args containing other shell metacharacters.
- # Many Bourne shells cannot handle close brackets correctly
- # in scan sets, and some SunOS ksh mistreat backslash-escaping
- # in scan sets (worked around with variable expansion),
- # and furthermore cannot handle '|' '&' '(' ')' in scan sets
- # at all, so we specify them separately.
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- lastarg="\"$lastarg\""
- ;;
- esac
-
- base_compile="$base_compile $lastarg"
+ func_append_quoted base_compile "$lastarg"
done # for arg
case $arg_mode in
arg)
- $echo "$modename: you must specify an argument for -Xcompile"
- exit $EXIT_FAILURE
+ func_fatal_error "you must specify an argument for -Xcompile"
;;
target)
- $echo "$modename: you must specify a target with \`-o'" 1>&2
- exit $EXIT_FAILURE
+ func_fatal_error "you must specify a target with \`-o'"
;;
*)
# Get the name of the library object.
- [ -z "$libobj" ] && libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'`
+ test -z "$libobj" && {
+ func_basename "$srcfile"
+ libobj="$func_basename_result"
+ }
;;
esac
# Recognize several different file suffixes.
# If the user specifies -o file.o, it is replaced with file.lo
- xform='[cCFSifmso]'
case $libobj in
- *.ada) xform=ada ;;
- *.adb) xform=adb ;;
- *.ads) xform=ads ;;
- *.asm) xform=asm ;;
- *.c++) xform=c++ ;;
- *.cc) xform=cc ;;
- *.ii) xform=ii ;;
- *.class) xform=class ;;
- *.cpp) xform=cpp ;;
- *.cxx) xform=cxx ;;
- *.[fF][09]?) xform=[fF][09]. ;;
- *.for) xform=for ;;
- *.java) xform=java ;;
- *.obj) xform=obj ;;
- *.sx) xform=sx ;;
+ *.[cCFSifmso] | \
+ *.ada | *.adb | *.ads | *.asm | \
+ *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \
+ *.[fF][09]? | *.for | *.java | *.go | *.obj | *.sx | *.cu | *.cup)
+ func_xform "$libobj"
+ libobj=$func_xform_result
+ ;;
esac
- libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`
-
case $libobj in
- *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;;
+ *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;;
*)
- $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2
- exit $EXIT_FAILURE
+ func_fatal_error "cannot determine name of library object from \`$libobj'"
;;
esac
@@ -840,7 +2107,15 @@
for arg in $later; do
case $arg in
+ -shared)
+ test "$build_libtool_libs" != yes && \
+ func_fatal_configuration "can not build a shared library"
+ build_old_libs=no
+ continue
+ ;;
+
-static)
+ build_libtool_libs=no
build_old_libs=yes
continue
;;
@@ -857,28 +2132,17 @@
esac
done
- qlibobj=`$echo "X$libobj" | $Xsed -e "$sed_quote_subst"`
- case $qlibobj in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- qlibobj="\"$qlibobj\"" ;;
- esac
- test "X$libobj" != "X$qlibobj" \
- && $echo "X$libobj" | grep '[]~#^*{};<>?"'"'"' &()|`$[]' \
- && $echo "$modename: libobj name \`$libobj' may not contain shell special characters."
- objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
- xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
- if test "X$xdir" = "X$obj"; then
- xdir=
- else
- xdir=$xdir/
- fi
+ func_quote_for_eval "$libobj"
+ test "X$libobj" != "X$func_quote_for_eval_result" \
+ && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"' &()|`$[]' \
+ && func_warning "libobj name \`$libobj' may not contain shell special characters."
+ func_dirname_and_basename "$obj" "/" ""
+ objname="$func_basename_result"
+ xdir="$func_dirname_result"
lobj=${xdir}$objdir/$objname
- if test -z "$base_compile"; then
- $echo "$modename: you must specify a compilation command" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
+ test -z "$base_compile" && \
+ func_fatal_help "you must specify a compilation command"
# Delete any leftover library objects.
if test "$build_old_libs" = yes; then
@@ -887,12 +2151,9 @@
removelist="$lobj $libobj ${libobj}T"
fi
- $run $rm $removelist
- trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15
-
# On Cygwin there's no "real" PIC flag so we must build both object types
case $host_os in
- cygwin* | mingw* | pw32* | os2*)
+ cygwin* | mingw* | pw32* | os2* | cegcc*)
pic_mode=default
;;
esac
@@ -904,10 +2165,8 @@
# Calculate the filename of the output object if compiler does
# not support -o with -c
if test "$compiler_c_o" = no; then
- output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
+ output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.${objext}
lockfile="$output_obj.lock"
- removelist="$removelist $output_obj $lockfile"
- trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15
else
output_obj=
need_locks=no
@@ -917,13 +2176,13 @@
# Lock this critical section if it is needed
# We use this script file to make the link, it avoids creating a new file
if test "$need_locks" = yes; then
- until $run ln "$progpath" "$lockfile" 2>/dev/null; do
- $show "Waiting for $lockfile to be removed"
+ until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
+ func_echo "Waiting for $lockfile to be removed"
sleep 2
done
elif test "$need_locks" = warn; then
if test -f "$lockfile"; then
- $echo "\
+ $ECHO "\
*** ERROR, $lockfile exists and contains:
`cat $lockfile 2>/dev/null`
@@ -934,35 +2193,22 @@
avoid parallel builds (make -j) in this platform, or get a better
compiler."
- $run $rm $removelist
+ $opt_dry_run || $RM $removelist
exit $EXIT_FAILURE
fi
- $echo "$srcfile" > "$lockfile"
+ func_append removelist " $output_obj"
+ $ECHO "$srcfile" > "$lockfile"
fi
- if test -n "$fix_srcfile_path"; then
- eval srcfile=\"$fix_srcfile_path\"
- fi
- qsrcfile=`$echo "X$srcfile" | $Xsed -e "$sed_quote_subst"`
- case $qsrcfile in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- qsrcfile="\"$qsrcfile\"" ;;
- esac
+ $opt_dry_run || $RM $removelist
+ func_append removelist " $lockfile"
+ trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15
- $run $rm "$libobj" "${libobj}T"
+ func_to_tool_file "$srcfile" func_convert_file_msys_to_w32
+ srcfile=$func_to_tool_file_result
+ func_quote_for_eval "$srcfile"
+ qsrcfile=$func_quote_for_eval_result
- # Create a libtool object file (analogous to a ".la" file),
- # but don't create it if we're doing a dry run.
- test -z "$run" && cat > ${libobj}T <<EOF
-# $libobj - a libtool object file
-# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
-#
-# Please DO NOT delete this file!
-# It is necessary for linking the library.
-
-# Name of the PIC object.
-EOF
-
# Only build a PIC object if we are building libtool libraries.
if test "$build_libtool_libs" = yes; then
# Without this assignment, base_compile gets emptied.
@@ -975,32 +2221,19 @@
command="$base_compile $qsrcfile"
fi
- if test ! -d "${xdir}$objdir"; then
- $show "$mkdir ${xdir}$objdir"
- $run $mkdir ${xdir}$objdir
- exit_status=$?
- if test "$exit_status" -ne 0 && test ! -d "${xdir}$objdir"; then
- exit $exit_status
- fi
- fi
+ func_mkdir_p "$xdir$objdir"
if test -z "$output_obj"; then
# Place PIC objects in $objdir
- command="$command -o $lobj"
+ func_append command " -o $lobj"
fi
- $run $rm "$lobj" "$output_obj"
+ func_show_eval_locale "$command" \
+ 'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE'
- $show "$command"
- if $run eval $lt_env "$command"; then :
- else
- test -n "$output_obj" && $run $rm $removelist
- exit $EXIT_FAILURE
- fi
-
if test "$need_locks" = warn &&
test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
- $echo "\
+ $ECHO "\
*** ERROR, $lockfile contains:
`cat $lockfile 2>/dev/null`
@@ -1014,38 +2247,20 @@
avoid parallel builds (make -j) in this platform, or get a better
compiler."
- $run $rm $removelist
+ $opt_dry_run || $RM $removelist
exit $EXIT_FAILURE
fi
# Just move the object if needed, then go on to compile the next one
if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
- $show "$mv $output_obj $lobj"
- if $run $mv $output_obj $lobj; then :
- else
- error=$?
- $run $rm $removelist
- exit $error
- fi
+ func_show_eval '$MV "$output_obj" "$lobj"' \
+ 'error=$?; $opt_dry_run || $RM $removelist; exit $error'
fi
- # Append the name of the PIC object to the libtool object file.
- test -z "$run" && cat >> ${libobj}T <<EOF
-pic_object='$objdir/$objname'
-
-EOF
-
# Allow error messages only from the first compilation.
if test "$suppress_opt" = yes; then
- suppress_output=' >/dev/null 2>&1'
+ suppress_output=' >/dev/null 2>&1'
fi
- else
- # No PIC object so indicate it doesn't exist in the libtool
- # object file.
- test -z "$run" && cat >> ${libobj}T <<EOF
-pic_object=none
-
-EOF
fi
# Only build a position-dependent object if we build old libraries.
@@ -1052,27 +2267,22 @@
if test "$build_old_libs" = yes; then
if test "$pic_mode" != yes; then
# Don't build PIC code
- command="$base_compile $qsrcfile"
+ command="$base_compile $qsrcfile$pie_flag"
else
command="$base_compile $qsrcfile $pic_flag"
fi
if test "$compiler_c_o" = yes; then
- command="$command -o $obj"
+ func_append command " -o $obj"
fi
# Suppress compiler output if we already did a PIC compilation.
- command="$command$suppress_output"
- $run $rm "$obj" "$output_obj"
- $show "$command"
- if $run eval $lt_env "$command"; then :
- else
- $run $rm $removelist
- exit $EXIT_FAILURE
- fi
+ func_append command "$suppress_output"
+ func_show_eval_locale "$command" \
+ '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'
if test "$need_locks" = warn &&
test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
- $echo "\
+ $ECHO "\
*** ERROR, $lockfile contains:
`cat $lockfile 2>/dev/null`
@@ -1086,53 +2296,2838 @@
avoid parallel builds (make -j) in this platform, or get a better
compiler."
- $run $rm $removelist
+ $opt_dry_run || $RM $removelist
exit $EXIT_FAILURE
fi
# Just move the object if needed
if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
- $show "$mv $output_obj $obj"
- if $run $mv $output_obj $obj; then :
+ func_show_eval '$MV "$output_obj" "$obj"' \
+ 'error=$?; $opt_dry_run || $RM $removelist; exit $error'
+ fi
+ fi
+
+ $opt_dry_run || {
+ func_write_libtool_object "$libobj" "$objdir/$objname" "$objname"
+
+ # Unlock the critical section if it was locked
+ if test "$need_locks" != no; then
+ removelist=$lockfile
+ $RM "$lockfile"
+ fi
+ }
+
+ exit $EXIT_SUCCESS
+}
+
+$opt_help || {
+ test "$opt_mode" = compile && func_mode_compile ${1+"$@"}
+}
+
+func_mode_help ()
+{
+ # We need to display help for each of the modes.
+ case $opt_mode in
+ "")
+ # Generic help is extracted from the usage comments
+ # at the start of this file.
+ func_help
+ ;;
+
+ clean)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
+
+Remove files from the build directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
+to RM.
+
+If FILE is a libtool library, object or program, all the files associated
+with it are deleted. Otherwise, only FILE itself is deleted using RM."
+ ;;
+
+ compile)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
+
+Compile a source file into a libtool library object.
+
+This mode accepts the following additional options:
+
+ -o OUTPUT-FILE set the output file name to OUTPUT-FILE
+ -no-suppress do not suppress compiler output for multiple passes
+ -prefer-pic try to build PIC objects only
+ -prefer-non-pic try to build non-PIC objects only
+ -shared do not build a \`.o' file suitable for static linking
+ -static only build a \`.o' file suitable for static linking
+ -Wc,FLAG pass FLAG directly to the compiler
+
+COMPILE-COMMAND is a command to be used in creating a \`standard' object file
+from the given SOURCEFILE.
+
+The output file name is determined by removing the directory component from
+SOURCEFILE, then substituting the C source code suffix \`.c' with the
+library object suffix, \`.lo'."
+ ;;
+
+ execute)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]...
+
+Automatically set library path, then run a program.
+
+This mode accepts the following additional options:
+
+ -dlopen FILE add the directory containing FILE to the library path
+
+This mode sets the library path environment variable according to \`-dlopen'
+flags.
+
+If any of the ARGS are libtool executable wrappers, then they are translated
+into their corresponding uninstalled binary, and any of their required library
+directories are added to the library path.
+
+Then, COMMAND is executed, with ARGS as arguments."
+ ;;
+
+ finish)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=finish [LIBDIR]...
+
+Complete the installation of libtool libraries.
+
+Each LIBDIR is a directory that contains libtool libraries.
+
+The commands that this mode executes may require superuser privileges. Use
+the \`--dry-run' option if you just want to see what would be executed."
+ ;;
+
+ install)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND...
+
+Install executables or libraries.
+
+INSTALL-COMMAND is the installation command. The first component should be
+either the \`install' or \`cp' program.
+
+The following components of INSTALL-COMMAND are treated specially:
+
+ -inst-prefix-dir PREFIX-DIR Use PREFIX-DIR as a staging area for installation
+
+The rest of the components are interpreted as arguments to that command (only
+BSD-compatible install options are recognized)."
+ ;;
+
+ link)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=link LINK-COMMAND...
+
+Link object files or libraries together to form another library, or to
+create an executable program.
+
+LINK-COMMAND is a command using the C compiler that you would use to create
+a program from several object files.
+
+The following components of LINK-COMMAND are treated specially:
+
+ -all-static do not do any dynamic linking at all
+ -avoid-version do not add a version suffix if possible
+ -bindir BINDIR specify path to binaries directory (for systems where
+ libraries must be found in the PATH setting at runtime)
+ -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime
+ -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols
+ -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
+ -export-symbols SYMFILE
+ try to export only the symbols listed in SYMFILE
+ -export-symbols-regex REGEX
+ try to export only the symbols matching REGEX
+ -LLIBDIR search LIBDIR for required installed libraries
+ -lNAME OUTPUT-FILE requires the installed library libNAME
+ -module build a library that can dlopened
+ -no-fast-install disable the fast-install mode
+ -no-install link a not-installable executable
+ -no-undefined declare that a library does not refer to external symbols
+ -o OUTPUT-FILE create OUTPUT-FILE from the specified objects
+ -objectlist FILE Use a list of object files found in FILE to specify objects
+ -precious-files-regex REGEX
+ don't remove output files matching REGEX
+ -release RELEASE specify package release information
+ -rpath LIBDIR the created library will eventually be installed in LIBDIR
+ -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries
+ -shared only do dynamic linking of libtool libraries
+ -shrext SUFFIX override the standard shared library file extension
+ -static do not do any dynamic linking of uninstalled libtool libraries
+ -static-libtool-libs
+ do not do any dynamic linking of libtool libraries
+ -version-info CURRENT[:REVISION[:AGE]]
+ specify library version info [each variable defaults to 0]
+ -weak LIBNAME declare that the target provides the LIBNAME interface
+ -Wc,FLAG
+ -Xcompiler FLAG pass linker-specific FLAG directly to the compiler
+ -Wl,FLAG
+ -Xlinker FLAG pass linker-specific FLAG directly to the linker
+ -XCClinker FLAG pass link-specific FLAG to the compiler driver (CC)
+
+All other options (arguments beginning with \`-') are ignored.
+
+Every other argument is treated as a filename. Files ending in \`.la' are
+treated as uninstalled libtool libraries, other files are standard or library
+object files.
+
+If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
+only library objects (\`.lo' files) may be specified, and \`-rpath' is
+required, except when creating a convenience library.
+
+If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
+using \`ar' and \`ranlib', or on Windows using \`lib'.
+
+If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
+is created, otherwise an executable program is created."
+ ;;
+
+ uninstall)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
+
+Remove libraries from an installation directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
+to RM.
+
+If FILE is a libtool library, all the files associated with it are deleted.
+Otherwise, only FILE itself is deleted using RM."
+ ;;
+
+ *)
+ func_fatal_help "invalid operation mode \`$opt_mode'"
+ ;;
+ esac
+
+ echo
+ $ECHO "Try \`$progname --help' for more information about other modes."
+}
+
+# Now that we've collected a possible --mode arg, show help if necessary
+if $opt_help; then
+ if test "$opt_help" = :; then
+ func_mode_help
+ else
+ {
+ func_help noexit
+ for opt_mode in compile link execute install finish uninstall clean; do
+ func_mode_help
+ done
+ } | sed -n '1p; 2,$s/^Usage:/ or: /p'
+ {
+ func_help noexit
+ for opt_mode in compile link execute install finish uninstall clean; do
+ echo
+ func_mode_help
+ done
+ } |
+ sed '1d
+ /^When reporting/,/^Report/{
+ H
+ d
+ }
+ $x
+ /information about other modes/d
+ /more detailed .*MODE/d
+ s/^Usage:.*--mode=\([^ ]*\) .*/Description of \1 mode:/'
+ fi
+ exit $?
+fi
+
+
+# func_mode_execute arg...
+func_mode_execute ()
+{
+ $opt_debug
+ # The first argument is the command name.
+ cmd="$nonopt"
+ test -z "$cmd" && \
+ func_fatal_help "you must specify a COMMAND"
+
+ # Handle -dlopen flags immediately.
+ for file in $opt_dlopen; do
+ test -f "$file" \
+ || func_fatal_help "\`$file' is not a file"
+
+ dir=
+ case $file in
+ *.la)
+ func_resolve_sysroot "$file"
+ file=$func_resolve_sysroot_result
+
+ # Check to see that this really is a libtool archive.
+ func_lalib_unsafe_p "$file" \
+ || func_fatal_help "\`$lib' is not a valid libtool archive"
+
+ # Read the libtool library.
+ dlname=
+ library_names=
+ func_source "$file"
+
+ # Skip this library if it cannot be dlopened.
+ if test -z "$dlname"; then
+ # Warn if it was a shared library.
+ test -n "$library_names" && \
+ func_warning "\`$file' was not linked with \`-export-dynamic'"
+ continue
+ fi
+
+ func_dirname "$file" "" "."
+ dir="$func_dirname_result"
+
+ if test -f "$dir/$objdir/$dlname"; then
+ func_append dir "/$objdir"
else
- error=$?
- $run $rm $removelist
- exit $error
+ if test ! -f "$dir/$dlname"; then
+ func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'"
+ fi
fi
+ ;;
+
+ *.lo)
+ # Just add the directory containing the .lo file.
+ func_dirname "$file" "" "."
+ dir="$func_dirname_result"
+ ;;
+
+ *)
+ func_warning "\`-dlopen' is ignored for non-libtool libraries and objects"
+ continue
+ ;;
+ esac
+
+ # Get the absolute pathname.
+ absdir=`cd "$dir" && pwd`
+ test -n "$absdir" && dir="$absdir"
+
+ # Now add the directory to shlibpath_var.
+ if eval "test -z \"\$$shlibpath_var\""; then
+ eval "$shlibpath_var=\"\$dir\""
+ else
+ eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
fi
+ done
- # Append the name of the non-PIC object the libtool object file.
- # Only append if the libtool object file exists.
- test -z "$run" && cat >> ${libobj}T <<EOF
-# Name of the non-PIC object.
-non_pic_object='$objname'
+ # This variable tells wrapper scripts just to set shlibpath_var
+ # rather than running their programs.
+ libtool_execute_magic="$magic"
-EOF
+ # Check if any of the arguments is a wrapper script.
+ args=
+ for file
+ do
+ case $file in
+ -* | *.la | *.lo ) ;;
+ *)
+ # Do a test to see if this is really a libtool program.
+ if func_ltwrapper_script_p "$file"; then
+ func_source "$file"
+ # Transform arg to wrapped name.
+ file="$progdir/$program"
+ elif func_ltwrapper_executable_p "$file"; then
+ func_ltwrapper_scriptname "$file"
+ func_source "$func_ltwrapper_scriptname_result"
+ # Transform arg to wrapped name.
+ file="$progdir/$program"
+ fi
+ ;;
+ esac
+ # Quote arguments (to preserve shell metacharacters).
+ func_append_quoted args "$file"
+ done
+
+ if test "X$opt_dry_run" = Xfalse; then
+ if test -n "$shlibpath_var"; then
+ # Export the shlibpath_var.
+ eval "export $shlibpath_var"
+ fi
+
+ # Restore saved environment variables
+ for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+ do
+ eval "if test \"\${save_$lt_var+set}\" = set; then
+ $lt_var=\$save_$lt_var; export $lt_var
+ else
+ $lt_unset $lt_var
+ fi"
+ done
+
+ # Now prepare to actually exec the command.
+ exec_cmd="\$cmd$args"
else
- # Append the name of the non-PIC object the libtool object file.
- # Only append if the libtool object file exists.
- test -z "$run" && cat >> ${libobj}T <<EOF
-# Name of the non-PIC object.
-non_pic_object=none
+ # Display what would be done.
+ if test -n "$shlibpath_var"; then
+ eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
+ echo "export $shlibpath_var"
+ fi
+ $ECHO "$cmd$args"
+ exit $EXIT_SUCCESS
+ fi
+}
-EOF
+test "$opt_mode" = execute && func_mode_execute ${1+"$@"}
+
+
+# func_mode_finish arg...
+func_mode_finish ()
+{
+ $opt_debug
+ libs=
+ libdirs=
+ admincmds=
+
+ for opt in "$nonopt" ${1+"$@"}
+ do
+ if test -d "$opt"; then
+ func_append libdirs " $opt"
+
+ elif test -f "$opt"; then
+ if func_lalib_unsafe_p "$opt"; then
+ func_append libs " $opt"
+ else
+ func_warning "\`$opt' is not a valid libtool archive"
+ fi
+
+ else
+ func_fatal_error "invalid argument \`$opt'"
+ fi
+ done
+
+ if test -n "$libs"; then
+ if test -n "$lt_sysroot"; then
+ sysroot_regex=`$ECHO "$lt_sysroot" | $SED "$sed_make_literal_regex"`
+ sysroot_cmd="s/\([ ']\)$sysroot_regex/\1/g;"
+ else
+ sysroot_cmd=
+ fi
+
+ # Remove sysroot references
+ if $opt_dry_run; then
+ for lib in $libs; do
+ echo "removing references to $lt_sysroot and \`=' prefixes from $lib"
+ done
+ else
+ tmpdir=`func_mktempdir`
+ for lib in $libs; do
+ sed -e "${sysroot_cmd} s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \
+ > $tmpdir/tmp-la
+ mv -f $tmpdir/tmp-la $lib
+ done
+ ${RM}r "$tmpdir"
+ fi
fi
- $run $mv "${libobj}T" "${libobj}"
+ if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
+ for libdir in $libdirs; do
+ if test -n "$finish_cmds"; then
+ # Do each command in the finish commands.
+ func_execute_cmds "$finish_cmds" 'admincmds="$admincmds
+'"$cmd"'"'
+ fi
+ if test -n "$finish_eval"; then
+ # Do the single finish_eval.
+ eval cmds=\"$finish_eval\"
+ $opt_dry_run || eval "$cmds" || func_append admincmds "
+ $cmds"
+ fi
+ done
+ fi
- # Unlock the critical section if it was locked
- if test "$need_locks" != no; then
- $run $rm "$lockfile"
+ # Exit here if they wanted silent mode.
+ $opt_silent && exit $EXIT_SUCCESS
+
+ if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
+ echo "----------------------------------------------------------------------"
+ echo "Libraries have been installed in:"
+ for libdir in $libdirs; do
+ $ECHO " $libdir"
+ done
+ echo
+ echo "If you ever happen to want to link against installed libraries"
+ echo "in a given directory, LIBDIR, you must either use libtool, and"
+ echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
+ echo "flag during linking and do at least one of the following:"
+ if test -n "$shlibpath_var"; then
+ echo " - add LIBDIR to the \`$shlibpath_var' environment variable"
+ echo " during execution"
+ fi
+ if test -n "$runpath_var"; then
+ echo " - add LIBDIR to the \`$runpath_var' environment variable"
+ echo " during linking"
+ fi
+ if test -n "$hardcode_libdir_flag_spec"; then
+ libdir=LIBDIR
+ eval flag=\"$hardcode_libdir_flag_spec\"
+
+ $ECHO " - use the \`$flag' linker flag"
+ fi
+ if test -n "$admincmds"; then
+ $ECHO " - have your system administrator run these commands:$admincmds"
+ fi
+ if test -f /etc/ld.so.conf; then
+ echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
+ fi
+ echo
+
+ echo "See any operating system documentation about shared libraries for"
+ case $host in
+ solaris2.[6789]|solaris2.1[0-9])
+ echo "more information, such as the ld(1), crle(1) and ld.so(8) manual"
+ echo "pages."
+ ;;
+ *)
+ echo "more information, such as the ld(1) and ld.so(8) manual pages."
+ ;;
+ esac
+ echo "----------------------------------------------------------------------"
fi
+ exit $EXIT_SUCCESS
+}
- exit $EXIT_SUCCESS
+test "$opt_mode" = finish && func_mode_finish ${1+"$@"}
+
+
+# func_mode_install arg...
+func_mode_install ()
+{
+ $opt_debug
+ # There may be an optional sh(1) argument at the beginning of
+ # install_prog (especially on Windows NT).
+ if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
+ # Allow the use of GNU shtool's install command.
+ case $nonopt in *shtool*) :;; *) false;; esac; then
+ # Aesthetically quote it.
+ func_quote_for_eval "$nonopt"
+ install_prog="$func_quote_for_eval_result "
+ arg=$1
+ shift
+ else
+ install_prog=
+ arg=$nonopt
+ fi
+
+ # The real first argument should be the name of the installation program.
+ # Aesthetically quote it.
+ func_quote_for_eval "$arg"
+ func_append install_prog "$func_quote_for_eval_result"
+ install_shared_prog=$install_prog
+ case " $install_prog " in
+ *[\\\ /]cp\ *) install_cp=: ;;
+ *) install_cp=false ;;
+ esac
+
+ # We need to accept at least all the BSD install flags.
+ dest=
+ files=
+ opts=
+ prev=
+ install_type=
+ isdir=no
+ stripme=
+ no_mode=:
+ for arg
+ do
+ arg2=
+ if test -n "$dest"; then
+ func_append files " $dest"
+ dest=$arg
+ continue
+ fi
+
+ case $arg in
+ -d) isdir=yes ;;
+ -f)
+ if $install_cp; then :; else
+ prev=$arg
+ fi
+ ;;
+ -g | -m | -o)
+ prev=$arg
+ ;;
+ -s)
+ stripme=" -s"
+ continue
+ ;;
+ -*)
+ ;;
+ *)
+ # If the previous option needed an argument, then skip it.
+ if test -n "$prev"; then
+ if test "x$prev" = x-m && test -n "$install_override_mode"; then
+ arg2=$install_override_mode
+ no_mode=false
+ fi
+ prev=
+ else
+ dest=$arg
+ continue
+ fi
+ ;;
+ esac
+
+ # Aesthetically quote the argument.
+ func_quote_for_eval "$arg"
+ func_append install_prog " $func_quote_for_eval_result"
+ if test -n "$arg2"; then
+ func_quote_for_eval "$arg2"
+ fi
+ func_append install_shared_prog " $func_quote_for_eval_result"
+ done
+
+ test -z "$install_prog" && \
+ func_fatal_help "you must specify an install program"
+
+ test -n "$prev" && \
+ func_fatal_help "the \`$prev' option requires an argument"
+
+ if test -n "$install_override_mode" && $no_mode; then
+ if $install_cp; then :; else
+ func_quote_for_eval "$install_override_mode"
+ func_append install_shared_prog " -m $func_quote_for_eval_result"
+ fi
+ fi
+
+ if test -z "$files"; then
+ if test -z "$dest"; then
+ func_fatal_help "no file or destination specified"
+ else
+ func_fatal_help "you must specify a destination"
+ fi
+ fi
+
+ # Strip any trailing slash from the destination.
+ func_stripname '' '/' "$dest"
+ dest=$func_stripname_result
+
+ # Check to see that the destination is a directory.
+ test -d "$dest" && isdir=yes
+ if test "$isdir" = yes; then
+ destdir="$dest"
+ destname=
+ else
+ func_dirname_and_basename "$dest" "" "."
+ destdir="$func_dirname_result"
+ destname="$func_basename_result"
+
+ # Not a directory, so check to see that there is only one file specified.
+ set dummy $files; shift
+ test "$#" -gt 1 && \
+ func_fatal_help "\`$dest' is not a directory"
+ fi
+ case $destdir in
+ [\\/]* | [A-Za-z]:[\\/]*) ;;
+ *)
+ for file in $files; do
+ case $file in
+ *.lo) ;;
+ *)
+ func_fatal_help "\`$destdir' must be an absolute directory name"
+ ;;
+ esac
+ done
+ ;;
+ esac
+
+ # This variable tells wrapper scripts just to set variables rather
+ # than running their programs.
+ libtool_install_magic="$magic"
+
+ staticlibs=
+ future_libdirs=
+ current_libdirs=
+ for file in $files; do
+
+ # Do each installation.
+ case $file in
+ *.$libext)
+ # Do the static libraries later.
+ func_append staticlibs " $file"
+ ;;
+
+ *.la)
+ func_resolve_sysroot "$file"
+ file=$func_resolve_sysroot_result
+
+ # Check to see that this really is a libtool archive.
+ func_lalib_unsafe_p "$file" \
+ || func_fatal_help "\`$file' is not a valid libtool archive"
+
+ library_names=
+ old_library=
+ relink_command=
+ func_source "$file"
+
+ # Add the libdir to current_libdirs if it is the destination.
+ if test "X$destdir" = "X$libdir"; then
+ case "$current_libdirs " in
+ *" $libdir "*) ;;
+ *) func_append current_libdirs " $libdir" ;;
+ esac
+ else
+ # Note the libdir as a future libdir.
+ case "$future_libdirs " in
+ *" $libdir "*) ;;
+ *) func_append future_libdirs " $libdir" ;;
+ esac
+ fi
+
+ func_dirname "$file" "/" ""
+ dir="$func_dirname_result"
+ func_append dir "$objdir"
+
+ if test -n "$relink_command"; then
+ # Determine the prefix the user has applied to our future dir.
+ inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"`
+
+ # Don't allow the user to place us outside of our expected
+ # location b/c this prevents finding dependent libraries that
+ # are installed to the same prefix.
+ # At present, this check doesn't affect windows .dll's that
+ # are installed into $libdir/../bin (currently, that works fine)
+ # but it's something to keep an eye on.
+ test "$inst_prefix_dir" = "$destdir" && \
+ func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir"
+
+ if test -n "$inst_prefix_dir"; then
+ # Stick the inst_prefix_dir data into the link command.
+ relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
+ else
+ relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
+ fi
+
+ func_warning "relinking \`$file'"
+ func_show_eval "$relink_command" \
+ 'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"'
+ fi
+
+ # See the names of the shared library.
+ set dummy $library_names; shift
+ if test -n "$1"; then
+ realname="$1"
+ shift
+
+ srcname="$realname"
+ test -n "$relink_command" && srcname="$realname"T
+
+ # Install the shared library and build the symlinks.
+ func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \
+ 'exit $?'
+ tstripme="$stripme"
+ case $host_os in
+ cygwin* | mingw* | pw32* | cegcc*)
+ case $realname in
+ *.dll.a)
+ tstripme=""
+ ;;
+ esac
+ ;;
+ esac
+ if test -n "$tstripme" && test -n "$striplib"; then
+ func_show_eval "$striplib $destdir/$realname" 'exit $?'
+ fi
+
+ if test "$#" -gt 0; then
+ # Delete the old symlinks, and create new ones.
+ # Try `ln -sf' first, because the `ln' binary might depend on
+ # the symlink we replace! Solaris /bin/ln does not understand -f,
+ # so we also need to try rm && ln -s.
+ for linkname
+ do
+ test "$linkname" != "$realname" \
+ && func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })"
+ done
+ fi
+
+ # Do each command in the postinstall commands.
+ lib="$destdir/$realname"
+ func_execute_cmds "$postinstall_cmds" 'exit $?'
+ fi
+
+ # Install the pseudo-library for information purposes.
+ func_basename "$file"
+ name="$func_basename_result"
+ instname="$dir/$name"i
+ func_show_eval "$install_prog $instname $destdir/$name" 'exit $?'
+
+ # Maybe install the static library, too.
+ test -n "$old_library" && func_append staticlibs " $dir/$old_library"
+ ;;
+
+ *.lo)
+ # Install (i.e. copy) a libtool object.
+
+ # Figure out destination file name, if it wasn't already specified.
+ if test -n "$destname"; then
+ destfile="$destdir/$destname"
+ else
+ func_basename "$file"
+ destfile="$func_basename_result"
+ destfile="$destdir/$destfile"
+ fi
+
+ # Deduce the name of the destination old-style object file.
+ case $destfile in
+ *.lo)
+ func_lo2o "$destfile"
+ staticdest=$func_lo2o_result
+ ;;
+ *.$objext)
+ staticdest="$destfile"
+ destfile=
+ ;;
+ *)
+ func_fatal_help "cannot copy a libtool object to \`$destfile'"
+ ;;
+ esac
+
+ # Install the libtool object if requested.
+ test -n "$destfile" && \
+ func_show_eval "$install_prog $file $destfile" 'exit $?'
+
+ # Install the old object if enabled.
+ if test "$build_old_libs" = yes; then
+ # Deduce the name of the old-style object file.
+ func_lo2o "$file"
+ staticobj=$func_lo2o_result
+ func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?'
+ fi
+ exit $EXIT_SUCCESS
+ ;;
+
+ *)
+ # Figure out destination file name, if it wasn't already specified.
+ if test -n "$destname"; then
+ destfile="$destdir/$destname"
+ else
+ func_basename "$file"
+ destfile="$func_basename_result"
+ destfile="$destdir/$destfile"
+ fi
+
+ # If the file is missing, and there is a .exe on the end, strip it
+ # because it is most likely a libtool script we actually want to
+ # install
+ stripped_ext=""
+ case $file in
+ *.exe)
+ if test ! -f "$file"; then
+ func_stripname '' '.exe' "$file"
+ file=$func_stripname_result
+ stripped_ext=".exe"
+ fi
+ ;;
+ esac
+
+ # Do a test to see if this is really a libtool program.
+ case $host in
+ *cygwin* | *mingw*)
+ if func_ltwrapper_executable_p "$file"; then
+ func_ltwrapper_scriptname "$file"
+ wrapper=$func_ltwrapper_scriptname_result
+ else
+ func_stripname '' '.exe' "$file"
+ wrapper=$func_stripname_result
+ fi
+ ;;
+ *)
+ wrapper=$file
+ ;;
+ esac
+ if func_ltwrapper_script_p "$wrapper"; then
+ notinst_deplibs=
+ relink_command=
+
+ func_source "$wrapper"
+
+ # Check the variables that should have been set.
+ test -z "$generated_by_libtool_version" && \
+ func_fatal_error "invalid libtool wrapper script \`$wrapper'"
+
+ finalize=yes
+ for lib in $notinst_deplibs; do
+ # Check to see that each library is installed.
+ libdir=
+ if test -f "$lib"; then
+ func_source "$lib"
+ fi
+ libfile="$libdir/"`$ECHO "$lib" | $SED 's%^.*/%%g'` ### testsuite: skip nested quoting test
+ if test -n "$libdir" && test ! -f "$libfile"; then
+ func_warning "\`$lib' has not been installed in \`$libdir'"
+ finalize=no
+ fi
+ done
+
+ relink_command=
+ func_source "$wrapper"
+
+ outputname=
+ if test "$fast_install" = no && test -n "$relink_command"; then
+ $opt_dry_run || {
+ if test "$finalize" = yes; then
+ tmpdir=`func_mktempdir`
+ func_basename "$file$stripped_ext"
+ file="$func_basename_result"
+ outputname="$tmpdir/$file"
+ # Replace the output file specification.
+ relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'`
+
+ $opt_silent || {
+ func_quote_for_expand "$relink_command"
+ eval "func_echo $func_quote_for_expand_result"
+ }
+ if eval "$relink_command"; then :
+ else
+ func_error "error: relink \`$file' with the above command before installing it"
+ $opt_dry_run || ${RM}r "$tmpdir"
+ continue
+ fi
+ file="$outputname"
+ else
+ func_warning "cannot relink \`$file'"
+ fi
+ }
+ else
+ # Install the binary that we compiled earlier.
+ file=`$ECHO "$file$stripped_ext" | $SED "s%\([^/]*\)$%$objdir/\1%"`
+ fi
+ fi
+
+ # remove .exe since cygwin /usr/bin/install will append another
+ # one anyway
+ case $install_prog,$host in
+ */usr/bin/install*,*cygwin*)
+ case $file:$destfile in
+ *.exe:*.exe)
+ # this is ok
+ ;;
+ *.exe:*)
+ destfile=$destfile.exe
+ ;;
+ *:*.exe)
+ func_stripname '' '.exe' "$destfile"
+ destfile=$func_stripname_result
+ ;;
+ esac
+ ;;
+ esac
+ func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?'
+ $opt_dry_run || if test -n "$outputname"; then
+ ${RM}r "$tmpdir"
+ fi
+ ;;
+ esac
+ done
+
+ for file in $staticlibs; do
+ func_basename "$file"
+ name="$func_basename_result"
+
+ # Set up the ranlib parameters.
+ oldlib="$destdir/$name"
+ func_to_tool_file "$oldlib" func_convert_file_msys_to_w32
+ tool_oldlib=$func_to_tool_file_result
+
+ func_show_eval "$install_prog \$file \$oldlib" 'exit $?'
+
+ if test -n "$stripme" && test -n "$old_striplib"; then
+ func_show_eval "$old_striplib $tool_oldlib" 'exit $?'
+ fi
+
+ # Do each command in the postinstall commands.
+ func_execute_cmds "$old_postinstall_cmds" 'exit $?'
+ done
+
+ test -n "$future_libdirs" && \
+ func_warning "remember to run \`$progname --finish$future_libdirs'"
+
+ if test -n "$current_libdirs"; then
+ # Maybe just do a dry run.
+ $opt_dry_run && current_libdirs=" -n$current_libdirs"
+ exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
+ else
+ exit $EXIT_SUCCESS
+ fi
+}
+
+test "$opt_mode" = install && func_mode_install ${1+"$@"}
+
+
+# func_generate_dlsyms outputname originator pic_p
+# Extract symbols from dlprefiles and create ${outputname}S.o with
+# a dlpreopen symbol table.
+func_generate_dlsyms ()
+{
+ $opt_debug
+ my_outputname="$1"
+ my_originator="$2"
+ my_pic_p="${3-no}"
+ my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'`
+ my_dlsyms=
+
+ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+ if test -n "$NM" && test -n "$global_symbol_pipe"; then
+ my_dlsyms="${my_outputname}S.c"
+ else
+ func_error "not configured to extract global symbols from dlpreopened files"
+ fi
+ fi
+
+ if test -n "$my_dlsyms"; then
+ case $my_dlsyms in
+ "") ;;
+ *.c)
+ # Discover the nlist of each of the dlfiles.
+ nlist="$output_objdir/${my_outputname}.nm"
+
+ func_show_eval "$RM $nlist ${nlist}S ${nlist}T"
+
+ # Parse the name list into a source file.
+ func_verbose "creating $output_objdir/$my_dlsyms"
+
+ $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\
+/* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */
+/* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */
+
+#ifdef __cplusplus
+extern \"C\" {
+#endif
+
+#if defined(__GNUC__) && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4))
+#pragma GCC diagnostic ignored \"-Wstrict-prototypes\"
+#endif
+
+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */
+#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
+/* DATA imports from DLLs on WIN32 con't be const, because runtime
+ relocations are performed -- see ld's documentation on pseudo-relocs. */
+# define LT_DLSYM_CONST
+#elif defined(__osf__)
+/* This system does not cope well with relocations in const data. */
+# define LT_DLSYM_CONST
+#else
+# define LT_DLSYM_CONST const
+#endif
+
+/* External symbol declarations for the compiler. */\
+"
+
+ if test "$dlself" = yes; then
+ func_verbose "generating symbol list for \`$output'"
+
+ $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
+
+ # Add our own program objects to the symbol list.
+ progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP`
+ for progfile in $progfiles; do
+ func_to_tool_file "$progfile" func_convert_file_msys_to_w32
+ func_verbose "extracting global C symbols from \`$func_to_tool_file_result'"
+ $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'"
+ done
+
+ if test -n "$exclude_expsyms"; then
+ $opt_dry_run || {
+ eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
+ eval '$MV "$nlist"T "$nlist"'
+ }
+ fi
+
+ if test -n "$export_symbols_regex"; then
+ $opt_dry_run || {
+ eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
+ eval '$MV "$nlist"T "$nlist"'
+ }
+ fi
+
+ # Prepare the list of exported symbols
+ if test -z "$export_symbols"; then
+ export_symbols="$output_objdir/$outputname.exp"
+ $opt_dry_run || {
+ $RM $export_symbols
+ eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
+ case $host in
+ *cygwin* | *mingw* | *cegcc* )
+ eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+ eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
+ ;;
+ esac
+ }
+ else
+ $opt_dry_run || {
+ eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
+ eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
+ eval '$MV "$nlist"T "$nlist"'
+ case $host in
+ *cygwin* | *mingw* | *cegcc* )
+ eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+ eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
+ ;;
+ esac
+ }
+ fi
+ fi
+
+ for dlprefile in $dlprefiles; do
+ func_verbose "extracting global C symbols from \`$dlprefile'"
+ func_basename "$dlprefile"
+ name="$func_basename_result"
+ case $host in
+ *cygwin* | *mingw* | *cegcc* )
+ # if an import library, we need to obtain dlname
+ if func_win32_import_lib_p "$dlprefile"; then
+ func_tr_sh "$dlprefile"
+ eval "curr_lafile=\$libfile_$func_tr_sh_result"
+ dlprefile_dlbasename=""
+ if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then
+ # Use subshell, to avoid clobbering current variable values
+ dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"`
+ if test -n "$dlprefile_dlname" ; then
+ func_basename "$dlprefile_dlname"
+ dlprefile_dlbasename="$func_basename_result"
+ else
+ # no lafile. user explicitly requested -dlpreopen <import library>.
+ $sharedlib_from_linklib_cmd "$dlprefile"
+ dlprefile_dlbasename=$sharedlib_from_linklib_result
+ fi
+ fi
+ $opt_dry_run || {
+ if test -n "$dlprefile_dlbasename" ; then
+ eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"'
+ else
+ func_warning "Could not compute DLL name from $name"
+ eval '$ECHO ": $name " >> "$nlist"'
+ fi
+ func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
+ eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe |
+ $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >> '$nlist'"
+ }
+ else # not an import lib
+ $opt_dry_run || {
+ eval '$ECHO ": $name " >> "$nlist"'
+ func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
+ eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
+ }
+ fi
+ ;;
+ *)
+ $opt_dry_run || {
+ eval '$ECHO ": $name " >> "$nlist"'
+ func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
+ eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
+ }
+ ;;
+ esac
+ done
+
+ $opt_dry_run || {
+ # Make sure we have at least an empty file.
+ test -f "$nlist" || : > "$nlist"
+
+ if test -n "$exclude_expsyms"; then
+ $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
+ $MV "$nlist"T "$nlist"
+ fi
+
+ # Try sorting and uniquifying the output.
+ if $GREP -v "^: " < "$nlist" |
+ if sort -k 3 </dev/null >/dev/null 2>&1; then
+ sort -k 3
+ else
+ sort +2
+ fi |
+ uniq > "$nlist"S; then
+ :
+ else
+ $GREP -v "^: " < "$nlist" > "$nlist"S
+ fi
+
+ if test -f "$nlist"S; then
+ eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"'
+ else
+ echo '/* NONE */' >> "$output_objdir/$my_dlsyms"
+ fi
+
+ echo >> "$output_objdir/$my_dlsyms" "\
+
+/* The mapping between symbol names and symbols. */
+typedef struct {
+ const char *name;
+ void *address;
+} lt_dlsymlist;
+extern LT_DLSYM_CONST lt_dlsymlist
+lt_${my_prefix}_LTX_preloaded_symbols[];
+LT_DLSYM_CONST lt_dlsymlist
+lt_${my_prefix}_LTX_preloaded_symbols[] =
+{\
+ { \"$my_originator\", (void *) 0 },"
+
+ case $need_lib_prefix in
+ no)
+ eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms"
+ ;;
+ *)
+ eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms"
+ ;;
+ esac
+ echo >> "$output_objdir/$my_dlsyms" "\
+ {0, (void *) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+ return lt_${my_prefix}_LTX_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif\
+"
+ } # !$opt_dry_run
+
+ pic_flag_for_symtable=
+ case "$compile_command " in
+ *" -static "*) ;;
+ *)
+ case $host in
+ # compiling the symbol table file with pic_flag works around
+ # a FreeBSD bug that causes programs to crash when -lm is
+ # linked before any other PIC object. But we must not use
+ # pic_flag when linking with -static. The problem exists in
+ # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
+ *-*-freebsd2.*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
+ pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;;
+ *-*-hpux*)
+ pic_flag_for_symtable=" $pic_flag" ;;
+ *)
+ if test "X$my_pic_p" != Xno; then
+ pic_flag_for_symtable=" $pic_flag"
+ fi
+ ;;
+ esac
+ ;;
+ esac
+ symtab_cflags=
+ for arg in $LTCFLAGS; do
+ case $arg in
+ -pie | -fpie | -fPIE) ;;
+ *) func_append symtab_cflags " $arg" ;;
+ esac
+ done
+
+ # Now compile the dynamic symbol file.
+ func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?'
+
+ # Clean up the generated files.
+ func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"'
+
+ # Transform the symbol file into the correct name.
+ symfileobj="$output_objdir/${my_outputname}S.$objext"
+ case $host in
+ *cygwin* | *mingw* | *cegcc* )
+ if test -f "$output_objdir/$my_outputname.def"; then
+ compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+ finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+ else
+ compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+ finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+ fi
+ ;;
+ *)
+ compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+ finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+ ;;
+ esac
+ ;;
+ *-*-freebsd*)
+ # FreeBSD doesn't need this...
+ ;;
+ *)
+ func_fatal_error "unknown suffix for \`$my_dlsyms'"
+ ;;
+ esac
+ else
+ # We keep going just in case the user didn't refer to
+ # lt_preloaded_symbols. The linker will fail if global_symbol_pipe
+ # really was required.
+
+ # Nullify the symbol file.
+ compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"`
+ finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"`
+ fi
+}
+
+# func_win32_libid arg
+# return the library type of file 'arg'
+#
+# Need a lot of goo to handle *both* DLLs and import libs
+# Has to be a shell function in order to 'eat' the argument
+# that is supplied when $file_magic_command is called.
+# Despite the name, also deal with 64 bit binaries.
+func_win32_libid ()
+{
+ $opt_debug
+ win32_libid_type="unknown"
+ win32_fileres=`file -L $1 2>/dev/null`
+ case $win32_fileres in
+ *ar\ archive\ import\ library*) # definitely import
+ win32_libid_type="x86 archive import"
;;
+ *ar\ archive*) # could be an import, or static
+ # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD.
+ if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
+ $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then
+ func_to_tool_file "$1" func_convert_file_msys_to_w32
+ win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" |
+ $SED -n -e '
+ 1,100{
+ / I /{
+ s,.*,import,
+ p
+ q
+ }
+ }'`
+ case $win32_nmres in
+ import*) win32_libid_type="x86 archive import";;
+ *) win32_libid_type="x86 archive static";;
+ esac
+ fi
+ ;;
+ *DLL*)
+ win32_libid_type="x86 DLL"
+ ;;
+ *executable*) # but shell scripts are "executable" too...
+ case $win32_fileres in
+ *MS\ Windows\ PE\ Intel*)
+ win32_libid_type="x86 DLL"
+ ;;
+ esac
+ ;;
+ esac
+ $ECHO "$win32_libid_type"
+}
- # libtool link mode
- link | relink)
- modename="$modename: link"
+# func_cygming_dll_for_implib ARG
+#
+# Platform-specific function to extract the
+# name of the DLL associated with the specified
+# import library ARG.
+# Invoked by eval'ing the libtool variable
+# $sharedlib_from_linklib_cmd
+# Result is available in the variable
+# $sharedlib_from_linklib_result
+func_cygming_dll_for_implib ()
+{
+ $opt_debug
+ sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"`
+}
+
+# func_cygming_dll_for_implib_fallback_core SECTION_NAME LIBNAMEs
+#
+# The is the core of a fallback implementation of a
+# platform-specific function to extract the name of the
+# DLL associated with the specified import library LIBNAME.
+#
+# SECTION_NAME is either .idata$6 or .idata$7, depending
+# on the platform and compiler that created the implib.
+#
+# Echos the name of the DLL associated with the
+# specified import library.
+func_cygming_dll_for_implib_fallback_core ()
+{
+ $opt_debug
+ match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"`
+ $OBJDUMP -s --section "$1" "$2" 2>/dev/null |
+ $SED '/^Contents of section '"$match_literal"':/{
+ # Place marker at beginning of archive member dllname section
+ s/.*/====MARK====/
+ p
+ d
+ }
+ # These lines can sometimes be longer than 43 characters, but
+ # are always uninteresting
+ /:[ ]*file format pe[i]\{,1\}-/d
+ /^In archive [^:]*:/d
+ # Ensure marker is printed
+ /^====MARK====/p
+ # Remove all lines with less than 43 characters
+ /^.\{43\}/!d
+ # From remaining lines, remove first 43 characters
+ s/^.\{43\}//' |
+ $SED -n '
+ # Join marker and all lines until next marker into a single line
+ /^====MARK====/ b para
+ H
+ $ b para
+ b
+ :para
+ x
+ s/\n//g
+ # Remove the marker
+ s/^====MARK====//
+ # Remove trailing dots and whitespace
+ s/[\. \t]*$//
+ # Print
+ /./p' |
+ # we now have a list, one entry per line, of the stringified
+ # contents of the appropriate section of all members of the
+ # archive which possess that section. Heuristic: eliminate
+ # all those which have a first or second character that is
+ # a '.' (that is, objdump's representation of an unprintable
+ # character.) This should work for all archives with less than
+ # 0x302f exports -- but will fail for DLLs whose name actually
+ # begins with a literal '.' or a single character followed by
+ # a '.'.
+ #
+ # Of those that remain, print the first one.
+ $SED -e '/^\./d;/^.\./d;q'
+}
+
+# func_cygming_gnu_implib_p ARG
+# This predicate returns with zero status (TRUE) if
+# ARG is a GNU/binutils-style import library. Returns
+# with nonzero status (FALSE) otherwise.
+func_cygming_gnu_implib_p ()
+{
+ $opt_debug
+ func_to_tool_file "$1" func_convert_file_msys_to_w32
+ func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'`
+ test -n "$func_cygming_gnu_implib_tmp"
+}
+
+# func_cygming_ms_implib_p ARG
+# This predicate returns with zero status (TRUE) if
+# ARG is an MS-style import library. Returns
+# with nonzero status (FALSE) otherwise.
+func_cygming_ms_implib_p ()
+{
+ $opt_debug
+ func_to_tool_file "$1" func_convert_file_msys_to_w32
+ func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'`
+ test -n "$func_cygming_ms_implib_tmp"
+}
+
+# func_cygming_dll_for_implib_fallback ARG
+# Platform-specific function to extract the
+# name of the DLL associated with the specified
+# import library ARG.
+#
+# This fallback implementation is for use when $DLLTOOL
+# does not support the --identify-strict option.
+# Invoked by eval'ing the libtool variable
+# $sharedlib_from_linklib_cmd
+# Result is available in the variable
+# $sharedlib_from_linklib_result
+func_cygming_dll_for_implib_fallback ()
+{
+ $opt_debug
+ if func_cygming_gnu_implib_p "$1" ; then
+ # binutils import library
+ sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"`
+ elif func_cygming_ms_implib_p "$1" ; then
+ # ms-generated import library
+ sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"`
+ else
+ # unknown
+ sharedlib_from_linklib_result=""
+ fi
+}
+
+
+# func_extract_an_archive dir oldlib
+func_extract_an_archive ()
+{
+ $opt_debug
+ f_ex_an_ar_dir="$1"; shift
+ f_ex_an_ar_oldlib="$1"
+ if test "$lock_old_archive_extraction" = yes; then
+ lockfile=$f_ex_an_ar_oldlib.lock
+ until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
+ func_echo "Waiting for $lockfile to be removed"
+ sleep 2
+ done
+ fi
+ func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \
+ 'stat=$?; rm -f "$lockfile"; exit $stat'
+ if test "$lock_old_archive_extraction" = yes; then
+ $opt_dry_run || rm -f "$lockfile"
+ fi
+ if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
+ :
+ else
+ func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib"
+ fi
+}
+
+
+# func_extract_archives gentop oldlib ...
+func_extract_archives ()
+{
+ $opt_debug
+ my_gentop="$1"; shift
+ my_oldlibs=${1+"$@"}
+ my_oldobjs=""
+ my_xlib=""
+ my_xabs=""
+ my_xdir=""
+
+ for my_xlib in $my_oldlibs; do
+ # Extract the objects.
+ case $my_xlib in
+ [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
+ *) my_xabs=`pwd`"/$my_xlib" ;;
+ esac
+ func_basename "$my_xlib"
+ my_xlib="$func_basename_result"
+ my_xlib_u=$my_xlib
+ while :; do
+ case " $extracted_archives " in
+ *" $my_xlib_u "*)
+ func_arith $extracted_serial + 1
+ extracted_serial=$func_arith_result
+ my_xlib_u=lt$extracted_serial-$my_xlib ;;
+ *) break ;;
+ esac
+ done
+ extracted_archives="$extracted_archives $my_xlib_u"
+ my_xdir="$my_gentop/$my_xlib_u"
+
+ func_mkdir_p "$my_xdir"
+
+ case $host in
+ *-darwin*)
+ func_verbose "Extracting $my_xabs"
+ # Do not bother doing anything if just a dry run
+ $opt_dry_run || {
+ darwin_orig_dir=`pwd`
+ cd $my_xdir || exit $?
+ darwin_archive=$my_xabs
+ darwin_curdir=`pwd`
+ darwin_base_archive=`basename "$darwin_archive"`
+ darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true`
+ if test -n "$darwin_arches"; then
+ darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'`
+ darwin_arch=
+ func_verbose "$darwin_base_archive has multiple architectures $darwin_arches"
+ for darwin_arch in $darwin_arches ; do
+ func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+ $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
+ cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+ func_extract_an_archive "`pwd`" "${darwin_base_archive}"
+ cd "$darwin_curdir"
+ $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
+ done # $darwin_arches
+ ## Okay now we've a bunch of thin objects, gotta fatten them up :)
+ darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u`
+ darwin_file=
+ darwin_files=
+ for darwin_file in $darwin_filelist; do
+ darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP`
+ $LIPO -create -output "$darwin_file" $darwin_files
+ done # $darwin_filelist
+ $RM -rf unfat-$$
+ cd "$darwin_orig_dir"
+ else
+ cd $darwin_orig_dir
+ func_extract_an_archive "$my_xdir" "$my_xabs"
+ fi # $darwin_arches
+ } # !$opt_dry_run
+ ;;
+ *)
+ func_extract_an_archive "$my_xdir" "$my_xabs"
+ ;;
+ esac
+ my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP`
+ done
+
+ func_extract_archives_result="$my_oldobjs"
+}
+
+
+# func_emit_wrapper [arg=no]
+#
+# Emit a libtool wrapper script on stdout.
+# Don't directly open a file because we may want to
+# incorporate the script contents within a cygwin/mingw
+# wrapper executable. Must ONLY be called from within
+# func_mode_link because it depends on a number of variables
+# set therein.
+#
+# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
+# variable will take. If 'yes', then the emitted script
+# will assume that the directory in which it is stored is
+# the $objdir directory. This is a cygwin/mingw-specific
+# behavior.
+func_emit_wrapper ()
+{
+ func_emit_wrapper_arg1=${1-no}
+
+ $ECHO "\
+#! $SHELL
+
+# $output - temporary wrapper script for $objdir/$outputname
+# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+#
+# The $output program cannot be directly executed until all the libtool
+# libraries that it depends on are installed.
+#
+# This wrapper script should never be moved out of the build directory.
+# If it is, it will not operate correctly.
+
+# Sed substitution that helps us do robust quoting. It backslashifies
+# metacharacters that are still active within double-quoted strings.
+sed_quote_subst='$sed_quote_subst'
+
+# Be Bourne compatible
+if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+ # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '\${1+\"\$@\"}'='\"\$@\"'
+ setopt NO_GLOB_SUBST
+else
+ case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
+fi
+BIN_SH=xpg4; export BIN_SH # for Tru64
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+relink_command=\"$relink_command\"
+
+# This environment variable determines our operation mode.
+if test \"\$libtool_install_magic\" = \"$magic\"; then
+ # install mode needs the following variables:
+ generated_by_libtool_version='$macro_version'
+ notinst_deplibs='$notinst_deplibs'
+else
+ # When we are sourced in execute mode, \$file and \$ECHO are already set.
+ if test \"\$libtool_execute_magic\" != \"$magic\"; then
+ file=\"\$0\""
+
+ qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"`
+ $ECHO "\
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+ eval 'cat <<_LTECHO_EOF
+\$1
+_LTECHO_EOF'
+}
+ ECHO=\"$qECHO\"
+ fi
+
+# Very basic option parsing. These options are (a) specific to
+# the libtool wrapper, (b) are identical between the wrapper
+# /script/ and the wrapper /executable/ which is used only on
+# windows platforms, and (c) all begin with the string "--lt-"
+# (application programs are unlikely to have options which match
+# this pattern).
+#
+# There are only two supported options: --lt-debug and
+# --lt-dump-script. There is, deliberately, no --lt-help.
+#
+# The first argument to this parsing function should be the
+# script's $0 value, followed by "$@".
+lt_option_debug=
+func_parse_lt_options ()
+{
+ lt_script_arg0=\$0
+ shift
+ for lt_opt
+ do
+ case \"\$lt_opt\" in
+ --lt-debug) lt_option_debug=1 ;;
+ --lt-dump-script)
+ lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\`
+ test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=.
+ lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\`
+ cat \"\$lt_dump_D/\$lt_dump_F\"
+ exit 0
+ ;;
+ --lt-*)
+ \$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2
+ exit 1
+ ;;
+ esac
+ done
+
+ # Print the debug banner immediately:
+ if test -n \"\$lt_option_debug\"; then
+ echo \"${outputname}:${output}:\${LINENO}: libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\" 1>&2
+ fi
+}
+
+# Used when --lt-debug. Prints its arguments to stdout
+# (redirection is the responsibility of the caller)
+func_lt_dump_args ()
+{
+ lt_dump_args_N=1;
+ for lt_arg
+ do
+ \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[\$lt_dump_args_N]: \$lt_arg\"
+ lt_dump_args_N=\`expr \$lt_dump_args_N + 1\`
+ done
+}
+
+# Core function for launching the target application
+func_exec_program_core ()
+{
+"
+ case $host in
+ # Backslashes separate directories on plain windows
+ *-*-mingw | *-*-os2* | *-cegcc*)
+ $ECHO "\
+ if test -n \"\$lt_option_debug\"; then
+ \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir\\\\\$program\" 1>&2
+ func_lt_dump_args \${1+\"\$@\"} 1>&2
+ fi
+ exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
+"
+ ;;
+
+ *)
+ $ECHO "\
+ if test -n \"\$lt_option_debug\"; then
+ \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir/\$program\" 1>&2
+ func_lt_dump_args \${1+\"\$@\"} 1>&2
+ fi
+ exec \"\$progdir/\$program\" \${1+\"\$@\"}
+"
+ ;;
+ esac
+ $ECHO "\
+ \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
+ exit 1
+}
+
+# A function to encapsulate launching the target application
+# Strips options in the --lt-* namespace from \$@ and
+# launches target application with the remaining arguments.
+func_exec_program ()
+{
+ case \" \$* \" in
+ *\\ --lt-*)
+ for lt_wr_arg
+ do
+ case \$lt_wr_arg in
+ --lt-*) ;;
+ *) set x \"\$@\" \"\$lt_wr_arg\"; shift;;
+ esac
+ shift
+ done ;;
+ esac
+ func_exec_program_core \${1+\"\$@\"}
+}
+
+ # Parse options
+ func_parse_lt_options \"\$0\" \${1+\"\$@\"}
+
+ # Find the directory that this script lives in.
+ thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\`
+ test \"x\$thisdir\" = \"x\$file\" && thisdir=.
+
+ # Follow symbolic links until we get to the real thisdir.
+ file=\`ls -ld \"\$file\" | $SED -n 's/.*-> //p'\`
+ while test -n \"\$file\"; do
+ destdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*\$%%'\`
+
+ # If there was a directory component, then change thisdir.
+ if test \"x\$destdir\" != \"x\$file\"; then
+ case \"\$destdir\" in
+ [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
+ *) thisdir=\"\$thisdir/\$destdir\" ;;
+ esac
+ fi
+
+ file=\`\$ECHO \"\$file\" | $SED 's%^.*/%%'\`
+ file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\`
+ done
+
+ # Usually 'no', except on cygwin/mingw when embedded into
+ # the cwrapper.
+ WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1
+ if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then
+ # special case for '.'
+ if test \"\$thisdir\" = \".\"; then
+ thisdir=\`pwd\`
+ fi
+ # remove .libs from thisdir
+ case \"\$thisdir\" in
+ *[\\\\/]$objdir ) thisdir=\`\$ECHO \"\$thisdir\" | $SED 's%[\\\\/][^\\\\/]*$%%'\` ;;
+ $objdir ) thisdir=. ;;
+ esac
+ fi
+
+ # Try to get the absolute directory name.
+ absdir=\`cd \"\$thisdir\" && pwd\`
+ test -n \"\$absdir\" && thisdir=\"\$absdir\"
+"
+
+ if test "$fast_install" = yes; then
+ $ECHO "\
+ program=lt-'$outputname'$exeext
+ progdir=\"\$thisdir/$objdir\"
+
+ if test ! -f \"\$progdir/\$program\" ||
+ { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
+ test \"X\$file\" != \"X\$progdir/\$program\"; }; then
+
+ file=\"\$\$-\$program\"
+
+ if test ! -d \"\$progdir\"; then
+ $MKDIR \"\$progdir\"
+ else
+ $RM \"\$progdir/\$file\"
+ fi"
+
+ $ECHO "\
+
+ # relink executable if necessary
+ if test -n \"\$relink_command\"; then
+ if relink_command_output=\`eval \$relink_command 2>&1\`; then :
+ else
+ $ECHO \"\$relink_command_output\" >&2
+ $RM \"\$progdir/\$file\"
+ exit 1
+ fi
+ fi
+
+ $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
+ { $RM \"\$progdir/\$program\";
+ $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; }
+ $RM \"\$progdir/\$file\"
+ fi"
+ else
+ $ECHO "\
+ program='$outputname'
+ progdir=\"\$thisdir/$objdir\"
+"
+ fi
+
+ $ECHO "\
+
+ if test -f \"\$progdir/\$program\"; then"
+
+ # fixup the dll searchpath if we need to.
+ #
+ # Fix the DLL searchpath if we need to. Do this before prepending
+ # to shlibpath, because on Windows, both are PATH and uninstalled
+ # libraries must come first.
+ if test -n "$dllsearchpath"; then
+ $ECHO "\
+ # Add the dll search path components to the executable PATH
+ PATH=$dllsearchpath:\$PATH
+"
+ fi
+
+ # Export our shlibpath_var if we have one.
+ if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+ $ECHO "\
+ # Add our own library path to $shlibpath_var
+ $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
+
+ # Some systems cannot cope with colon-terminated $shlibpath_var
+ # The second colon is a workaround for a bug in BeOS R4 sed
+ $shlibpath_var=\`\$ECHO \"\$$shlibpath_var\" | $SED 's/::*\$//'\`
+
+ export $shlibpath_var
+"
+ fi
+
+ $ECHO "\
+ if test \"\$libtool_execute_magic\" != \"$magic\"; then
+ # Run the actual program with our arguments.
+ func_exec_program \${1+\"\$@\"}
+ fi
+ else
+ # The program doesn't exist.
+ \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
+ \$ECHO \"This script is just a wrapper for \$program.\" 1>&2
+ \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
+ exit 1
+ fi
+fi\
+"
+}
+
+
+# func_emit_cwrapperexe_src
+# emit the source code for a wrapper executable on stdout
+# Must ONLY be called from within func_mode_link because
+# it depends on a number of variable set therein.
+func_emit_cwrapperexe_src ()
+{
+ cat <<EOF
+
+/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
+ Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+
+ The $output program cannot be directly executed until all the libtool
+ libraries that it depends on are installed.
+
+ This wrapper executable should never be moved out of the build directory.
+ If it is, it will not operate correctly.
+*/
+EOF
+ cat <<"EOF"
+#ifdef _MSC_VER
+# define _CRT_SECURE_NO_DEPRECATE 1
+#endif
+#include <stdio.h>
+#include <stdlib.h>
+#ifdef _MSC_VER
+# include <direct.h>
+# include <process.h>
+# include <io.h>
+#else
+# include <unistd.h>
+# include <stdint.h>
+# ifdef __CYGWIN__
+# include <io.h>
+# endif
+#endif
+#include <malloc.h>
+#include <stdarg.h>
+#include <assert.h>
+#include <string.h>
+#include <ctype.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <sys/stat.h>
+
+/* declarations of non-ANSI functions */
+#if defined(__MINGW32__)
+# ifdef __STRICT_ANSI__
+int _putenv (const char *);
+# endif
+#elif defined(__CYGWIN__)
+# ifdef __STRICT_ANSI__
+char *realpath (const char *, char *);
+int putenv (char *);
+int setenv (const char *, const char *, int);
+# endif
+/* #elif defined (other platforms) ... */
+#endif
+
+/* portability defines, excluding path handling macros */
+#if defined(_MSC_VER)
+# define setmode _setmode
+# define stat _stat
+# define chmod _chmod
+# define getcwd _getcwd
+# define putenv _putenv
+# define S_IXUSR _S_IEXEC
+# ifndef _INTPTR_T_DEFINED
+# define _INTPTR_T_DEFINED
+# define intptr_t int
+# endif
+#elif defined(__MINGW32__)
+# define setmode _setmode
+# define stat _stat
+# define chmod _chmod
+# define getcwd _getcwd
+# define putenv _putenv
+#elif defined(__CYGWIN__)
+# define HAVE_SETENV
+# define FOPEN_WB "wb"
+/* #elif defined (other platforms) ... */
+#endif
+
+#if defined(PATH_MAX)
+# define LT_PATHMAX PATH_MAX
+#elif defined(MAXPATHLEN)
+# define LT_PATHMAX MAXPATHLEN
+#else
+# define LT_PATHMAX 1024
+#endif
+
+#ifndef S_IXOTH
+# define S_IXOTH 0
+#endif
+#ifndef S_IXGRP
+# define S_IXGRP 0
+#endif
+
+/* path handling portability macros */
+#ifndef DIR_SEPARATOR
+# define DIR_SEPARATOR '/'
+# define PATH_SEPARATOR ':'
+#endif
+
+#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
+ defined (__OS2__)
+# define HAVE_DOS_BASED_FILE_SYSTEM
+# define FOPEN_WB "wb"
+# ifndef DIR_SEPARATOR_2
+# define DIR_SEPARATOR_2 '\\'
+# endif
+# ifndef PATH_SEPARATOR_2
+# define PATH_SEPARATOR_2 ';'
+# endif
+#endif
+
+#ifndef DIR_SEPARATOR_2
+# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
+#else /* DIR_SEPARATOR_2 */
+# define IS_DIR_SEPARATOR(ch) \
+ (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
+#endif /* DIR_SEPARATOR_2 */
+
+#ifndef PATH_SEPARATOR_2
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
+#else /* PATH_SEPARATOR_2 */
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
+#endif /* PATH_SEPARATOR_2 */
+
+#ifndef FOPEN_WB
+# define FOPEN_WB "w"
+#endif
+#ifndef _O_BINARY
+# define _O_BINARY 0
+#endif
+
+#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type)))
+#define XFREE(stale) do { \
+ if (stale) { free ((void *) stale); stale = 0; } \
+} while (0)
+
+#if defined(LT_DEBUGWRAPPER)
+static int lt_debug = 1;
+#else
+static int lt_debug = 0;
+#endif
+
+const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */
+
+void *xmalloc (size_t num);
+char *xstrdup (const char *string);
+const char *base_name (const char *name);
+char *find_executable (const char *wrapper);
+char *chase_symlinks (const char *pathspec);
+int make_executable (const char *path);
+int check_executable (const char *path);
+char *strendzap (char *str, const char *pat);
+void lt_debugprintf (const char *file, int line, const char *fmt, ...);
+void lt_fatal (const char *file, int line, const char *message, ...);
+static const char *nonnull (const char *s);
+static const char *nonempty (const char *s);
+void lt_setenv (const char *name, const char *value);
+char *lt_extend_str (const char *orig_value, const char *add, int to_end);
+void lt_update_exe_path (const char *name, const char *value);
+void lt_update_lib_path (const char *name, const char *value);
+char **prepare_spawn (char **argv);
+void lt_dump_script (FILE *f);
+EOF
+
+ cat <<EOF
+volatile const char * MAGIC_EXE = "$magic_exe";
+const char * LIB_PATH_VARNAME = "$shlibpath_var";
+EOF
+
+ if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+ func_to_host_path "$temp_rpath"
+ cat <<EOF
+const char * LIB_PATH_VALUE = "$func_to_host_path_result";
+EOF
+ else
+ cat <<"EOF"
+const char * LIB_PATH_VALUE = "";
+EOF
+ fi
+
+ if test -n "$dllsearchpath"; then
+ func_to_host_path "$dllsearchpath:"
+ cat <<EOF
+const char * EXE_PATH_VARNAME = "PATH";
+const char * EXE_PATH_VALUE = "$func_to_host_path_result";
+EOF
+ else
+ cat <<"EOF"
+const char * EXE_PATH_VARNAME = "";
+const char * EXE_PATH_VALUE = "";
+EOF
+ fi
+
+ if test "$fast_install" = yes; then
+ cat <<EOF
+const char * TARGET_PROGRAM_NAME = "lt-$outputname"; /* hopefully, no .exe */
+EOF
+ else
+ cat <<EOF
+const char * TARGET_PROGRAM_NAME = "$outputname"; /* hopefully, no .exe */
+EOF
+ fi
+
+
+ cat <<"EOF"
+
+#define LTWRAPPER_OPTION_PREFIX "--lt-"
+
+static const char *ltwrapper_option_prefix = LTWRAPPER_OPTION_PREFIX;
+static const char *dumpscript_opt = LTWRAPPER_OPTION_PREFIX "dump-script";
+static const char *debug_opt = LTWRAPPER_OPTION_PREFIX "debug";
+
+int
+main (int argc, char *argv[])
+{
+ char **newargz;
+ int newargc;
+ char *tmp_pathspec;
+ char *actual_cwrapper_path;
+ char *actual_cwrapper_name;
+ char *target_name;
+ char *lt_argv_zero;
+ intptr_t rval = 127;
+
+ int i;
+
+ program_name = (char *) xstrdup (base_name (argv[0]));
+ newargz = XMALLOC (char *, argc + 1);
+
+ /* very simple arg parsing; don't want to rely on getopt
+ * also, copy all non cwrapper options to newargz, except
+ * argz[0], which is handled differently
+ */
+ newargc=0;
+ for (i = 1; i < argc; i++)
+ {
+ if (strcmp (argv[i], dumpscript_opt) == 0)
+ {
+EOF
+ case "$host" in
+ *mingw* | *cygwin* )
+ # make stdout use "unix" line endings
+ echo " setmode(1,_O_BINARY);"
+ ;;
+ esac
+
+ cat <<"EOF"
+ lt_dump_script (stdout);
+ return 0;
+ }
+ if (strcmp (argv[i], debug_opt) == 0)
+ {
+ lt_debug = 1;
+ continue;
+ }
+ if (strcmp (argv[i], ltwrapper_option_prefix) == 0)
+ {
+ /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
+ namespace, but it is not one of the ones we know about and
+ have already dealt with, above (inluding dump-script), then
+ report an error. Otherwise, targets might begin to believe
+ they are allowed to use options in the LTWRAPPER_OPTION_PREFIX
+ namespace. The first time any user complains about this, we'll
+ need to make LTWRAPPER_OPTION_PREFIX a configure-time option
+ or a configure.ac-settable value.
+ */
+ lt_fatal (__FILE__, __LINE__,
+ "unrecognized %s option: '%s'",
+ ltwrapper_option_prefix, argv[i]);
+ }
+ /* otherwise ... */
+ newargz[++newargc] = xstrdup (argv[i]);
+ }
+ newargz[++newargc] = NULL;
+
+EOF
+ cat <<EOF
+ /* The GNU banner must be the first non-error debug message */
+ lt_debugprintf (__FILE__, __LINE__, "libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\n");
+EOF
+ cat <<"EOF"
+ lt_debugprintf (__FILE__, __LINE__, "(main) argv[0]: %s\n", argv[0]);
+ lt_debugprintf (__FILE__, __LINE__, "(main) program_name: %s\n", program_name);
+
+ tmp_pathspec = find_executable (argv[0]);
+ if (tmp_pathspec == NULL)
+ lt_fatal (__FILE__, __LINE__, "couldn't find %s", argv[0]);
+ lt_debugprintf (__FILE__, __LINE__,
+ "(main) found exe (before symlink chase) at: %s\n",
+ tmp_pathspec);
+
+ actual_cwrapper_path = chase_symlinks (tmp_pathspec);
+ lt_debugprintf (__FILE__, __LINE__,
+ "(main) found exe (after symlink chase) at: %s\n",
+ actual_cwrapper_path);
+ XFREE (tmp_pathspec);
+
+ actual_cwrapper_name = xstrdup (base_name (actual_cwrapper_path));
+ strendzap (actual_cwrapper_path, actual_cwrapper_name);
+
+ /* wrapper name transforms */
+ strendzap (actual_cwrapper_name, ".exe");
+ tmp_pathspec = lt_extend_str (actual_cwrapper_name, ".exe", 1);
+ XFREE (actual_cwrapper_name);
+ actual_cwrapper_name = tmp_pathspec;
+ tmp_pathspec = 0;
+
+ /* target_name transforms -- use actual target program name; might have lt- prefix */
+ target_name = xstrdup (base_name (TARGET_PROGRAM_NAME));
+ strendzap (target_name, ".exe");
+ tmp_pathspec = lt_extend_str (target_name, ".exe", 1);
+ XFREE (target_name);
+ target_name = tmp_pathspec;
+ tmp_pathspec = 0;
+
+ lt_debugprintf (__FILE__, __LINE__,
+ "(main) libtool target name: %s\n",
+ target_name);
+EOF
+
+ cat <<EOF
+ newargz[0] =
+ XMALLOC (char, (strlen (actual_cwrapper_path) +
+ strlen ("$objdir") + 1 + strlen (actual_cwrapper_name) + 1));
+ strcpy (newargz[0], actual_cwrapper_path);
+ strcat (newargz[0], "$objdir");
+ strcat (newargz[0], "/");
+EOF
+
+ cat <<"EOF"
+ /* stop here, and copy so we don't have to do this twice */
+ tmp_pathspec = xstrdup (newargz[0]);
+
+ /* do NOT want the lt- prefix here, so use actual_cwrapper_name */
+ strcat (newargz[0], actual_cwrapper_name);
+
+ /* DO want the lt- prefix here if it exists, so use target_name */
+ lt_argv_zero = lt_extend_str (tmp_pathspec, target_name, 1);
+ XFREE (tmp_pathspec);
+ tmp_pathspec = NULL;
+EOF
+
+ case $host_os in
+ mingw*)
+ cat <<"EOF"
+ {
+ char* p;
+ while ((p = strchr (newargz[0], '\\')) != NULL)
+ {
+ *p = '/';
+ }
+ while ((p = strchr (lt_argv_zero, '\\')) != NULL)
+ {
+ *p = '/';
+ }
+ }
+EOF
+ ;;
+ esac
+
+ cat <<"EOF"
+ XFREE (target_name);
+ XFREE (actual_cwrapper_path);
+ XFREE (actual_cwrapper_name);
+
+ lt_setenv ("BIN_SH", "xpg4"); /* for Tru64 */
+ lt_setenv ("DUALCASE", "1"); /* for MSK sh */
+ /* Update the DLL searchpath. EXE_PATH_VALUE ($dllsearchpath) must
+ be prepended before (that is, appear after) LIB_PATH_VALUE ($temp_rpath)
+ because on Windows, both *_VARNAMEs are PATH but uninstalled
+ libraries must come first. */
+ lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE);
+ lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE);
+
+ lt_debugprintf (__FILE__, __LINE__, "(main) lt_argv_zero: %s\n",
+ nonnull (lt_argv_zero));
+ for (i = 0; i < newargc; i++)
+ {
+ lt_debugprintf (__FILE__, __LINE__, "(main) newargz[%d]: %s\n",
+ i, nonnull (newargz[i]));
+ }
+
+EOF
+
+ case $host_os in
+ mingw*)
+ cat <<"EOF"
+ /* execv doesn't actually work on mingw as expected on unix */
+ newargz = prepare_spawn (newargz);
+ rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
+ if (rval == -1)
+ {
+ /* failed to start process */
+ lt_debugprintf (__FILE__, __LINE__,
+ "(main) failed to launch target \"%s\": %s\n",
+ lt_argv_zero, nonnull (strerror (errno)));
+ return 127;
+ }
+ return rval;
+EOF
+ ;;
+ *)
+ cat <<"EOF"
+ execv (lt_argv_zero, newargz);
+ return rval; /* =127, but avoids unused variable warning */
+EOF
+ ;;
+ esac
+
+ cat <<"EOF"
+}
+
+void *
+xmalloc (size_t num)
+{
+ void *p = (void *) malloc (num);
+ if (!p)
+ lt_fatal (__FILE__, __LINE__, "memory exhausted");
+
+ return p;
+}
+
+char *
+xstrdup (const char *string)
+{
+ return string ? strcpy ((char *) xmalloc (strlen (string) + 1),
+ string) : NULL;
+}
+
+const char *
+base_name (const char *name)
+{
+ const char *base;
+
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+ /* Skip over the disk name in MSDOS pathnames. */
+ if (isalpha ((unsigned char) name[0]) && name[1] == ':')
+ name += 2;
+#endif
+
+ for (base = name; *name; name++)
+ if (IS_DIR_SEPARATOR (*name))
+ base = name + 1;
+ return base;
+}
+
+int
+check_executable (const char *path)
+{
+ struct stat st;
+
+ lt_debugprintf (__FILE__, __LINE__, "(check_executable): %s\n",
+ nonempty (path));
+ if ((!path) || (!*path))
+ return 0;
+
+ if ((stat (path, &st) >= 0)
+ && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH)))
+ return 1;
+ else
+ return 0;
+}
+
+int
+make_executable (const char *path)
+{
+ int rval = 0;
+ struct stat st;
+
+ lt_debugprintf (__FILE__, __LINE__, "(make_executable): %s\n",
+ nonempty (path));
+ if ((!path) || (!*path))
+ return 0;
+
+ if (stat (path, &st) >= 0)
+ {
+ rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR);
+ }
+ return rval;
+}
+
+/* Searches for the full path of the wrapper. Returns
+ newly allocated full path name if found, NULL otherwise
+ Does not chase symlinks, even on platforms that support them.
+*/
+char *
+find_executable (const char *wrapper)
+{
+ int has_slash = 0;
+ const char *p;
+ const char *p_next;
+ /* static buffer for getcwd */
+ char tmp[LT_PATHMAX + 1];
+ int tmp_len;
+ char *concat_name;
+
+ lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n",
+ nonempty (wrapper));
+
+ if ((wrapper == NULL) || (*wrapper == '\0'))
+ return NULL;
+
+ /* Absolute path? */
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+ if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':')
+ {
+ concat_name = xstrdup (wrapper);
+ if (check_executable (concat_name))
+ return concat_name;
+ XFREE (concat_name);
+ }
+ else
+ {
+#endif
+ if (IS_DIR_SEPARATOR (wrapper[0]))
+ {
+ concat_name = xstrdup (wrapper);
+ if (check_executable (concat_name))
+ return concat_name;
+ XFREE (concat_name);
+ }
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+ }
+#endif
+
+ for (p = wrapper; *p; p++)
+ if (*p == '/')
+ {
+ has_slash = 1;
+ break;
+ }
+ if (!has_slash)
+ {
+ /* no slashes; search PATH */
+ const char *path = getenv ("PATH");
+ if (path != NULL)
+ {
+ for (p = path; *p; p = p_next)
+ {
+ const char *q;
+ size_t p_len;
+ for (q = p; *q; q++)
+ if (IS_PATH_SEPARATOR (*q))
+ break;
+ p_len = q - p;
+ p_next = (*q == '\0' ? q : q + 1);
+ if (p_len == 0)
+ {
+ /* empty path: current directory */
+ if (getcwd (tmp, LT_PATHMAX) == NULL)
+ lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
+ nonnull (strerror (errno)));
+ tmp_len = strlen (tmp);
+ concat_name =
+ XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
+ memcpy (concat_name, tmp, tmp_len);
+ concat_name[tmp_len] = '/';
+ strcpy (concat_name + tmp_len + 1, wrapper);
+ }
+ else
+ {
+ concat_name =
+ XMALLOC (char, p_len + 1 + strlen (wrapper) + 1);
+ memcpy (concat_name, p, p_len);
+ concat_name[p_len] = '/';
+ strcpy (concat_name + p_len + 1, wrapper);
+ }
+ if (check_executable (concat_name))
+ return concat_name;
+ XFREE (concat_name);
+ }
+ }
+ /* not found in PATH; assume curdir */
+ }
+ /* Relative path | not found in path: prepend cwd */
+ if (getcwd (tmp, LT_PATHMAX) == NULL)
+ lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
+ nonnull (strerror (errno)));
+ tmp_len = strlen (tmp);
+ concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
+ memcpy (concat_name, tmp, tmp_len);
+ concat_name[tmp_len] = '/';
+ strcpy (concat_name + tmp_len + 1, wrapper);
+
+ if (check_executable (concat_name))
+ return concat_name;
+ XFREE (concat_name);
+ return NULL;
+}
+
+char *
+chase_symlinks (const char *pathspec)
+{
+#ifndef S_ISLNK
+ return xstrdup (pathspec);
+#else
+ char buf[LT_PATHMAX];
+ struct stat s;
+ char *tmp_pathspec = xstrdup (pathspec);
+ char *p;
+ int has_symlinks = 0;
+ while (strlen (tmp_pathspec) && !has_symlinks)
+ {
+ lt_debugprintf (__FILE__, __LINE__,
+ "checking path component for symlinks: %s\n",
+ tmp_pathspec);
+ if (lstat (tmp_pathspec, &s) == 0)
+ {
+ if (S_ISLNK (s.st_mode) != 0)
+ {
+ has_symlinks = 1;
+ break;
+ }
+
+ /* search backwards for last DIR_SEPARATOR */
+ p = tmp_pathspec + strlen (tmp_pathspec) - 1;
+ while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
+ p--;
+ if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
+ {
+ /* no more DIR_SEPARATORS left */
+ break;
+ }
+ *p = '\0';
+ }
+ else
+ {
+ lt_fatal (__FILE__, __LINE__,
+ "error accessing file \"%s\": %s",
+ tmp_pathspec, nonnull (strerror (errno)));
+ }
+ }
+ XFREE (tmp_pathspec);
+
+ if (!has_symlinks)
+ {
+ return xstrdup (pathspec);
+ }
+
+ tmp_pathspec = realpath (pathspec, buf);
+ if (tmp_pathspec == 0)
+ {
+ lt_fatal (__FILE__, __LINE__,
+ "could not follow symlinks for %s", pathspec);
+ }
+ return xstrdup (tmp_pathspec);
+#endif
+}
+
+char *
+strendzap (char *str, const char *pat)
+{
+ size_t len, patlen;
+
+ assert (str != NULL);
+ assert (pat != NULL);
+
+ len = strlen (str);
+ patlen = strlen (pat);
+
+ if (patlen <= len)
+ {
+ str += len - patlen;
+ if (strcmp (str, pat) == 0)
+ *str = '\0';
+ }
+ return str;
+}
+
+void
+lt_debugprintf (const char *file, int line, const char *fmt, ...)
+{
+ va_list args;
+ if (lt_debug)
+ {
+ (void) fprintf (stderr, "%s:%s:%d: ", program_name, file, line);
+ va_start (args, fmt);
+ (void) vfprintf (stderr, fmt, args);
+ va_end (args);
+ }
+}
+
+static void
+lt_error_core (int exit_status, const char *file,
+ int line, const char *mode,
+ const char *message, va_list ap)
+{
+ fprintf (stderr, "%s:%s:%d: %s: ", program_name, file, line, mode);
+ vfprintf (stderr, message, ap);
+ fprintf (stderr, ".\n");
+
+ if (exit_status >= 0)
+ exit (exit_status);
+}
+
+void
+lt_fatal (const char *file, int line, const char *message, ...)
+{
+ va_list ap;
+ va_start (ap, message);
+ lt_error_core (EXIT_FAILURE, file, line, "FATAL", message, ap);
+ va_end (ap);
+}
+
+static const char *
+nonnull (const char *s)
+{
+ return s ? s : "(null)";
+}
+
+static const char *
+nonempty (const char *s)
+{
+ return (s && !*s) ? "(empty)" : nonnull (s);
+}
+
+void
+lt_setenv (const char *name, const char *value)
+{
+ lt_debugprintf (__FILE__, __LINE__,
+ "(lt_setenv) setting '%s' to '%s'\n",
+ nonnull (name), nonnull (value));
+ {
+#ifdef HAVE_SETENV
+ /* always make a copy, for consistency with !HAVE_SETENV */
+ char *str = xstrdup (value);
+ setenv (name, str, 1);
+#else
+ int len = strlen (name) + 1 + strlen (value) + 1;
+ char *str = XMALLOC (char, len);
+ sprintf (str, "%s=%s", name, value);
+ if (putenv (str) != EXIT_SUCCESS)
+ {
+ XFREE (str);
+ }
+#endif
+ }
+}
+
+char *
+lt_extend_str (const char *orig_value, const char *add, int to_end)
+{
+ char *new_value;
+ if (orig_value && *orig_value)
+ {
+ int orig_value_len = strlen (orig_value);
+ int add_len = strlen (add);
+ new_value = XMALLOC (char, add_len + orig_value_len + 1);
+ if (to_end)
+ {
+ strcpy (new_value, orig_value);
+ strcpy (new_value + orig_value_len, add);
+ }
+ else
+ {
+ strcpy (new_value, add);
+ strcpy (new_value + add_len, orig_value);
+ }
+ }
+ else
+ {
+ new_value = xstrdup (add);
+ }
+ return new_value;
+}
+
+void
+lt_update_exe_path (const char *name, const char *value)
+{
+ lt_debugprintf (__FILE__, __LINE__,
+ "(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
+ nonnull (name), nonnull (value));
+
+ if (name && *name && value && *value)
+ {
+ char *new_value = lt_extend_str (getenv (name), value, 0);
+ /* some systems can't cope with a ':'-terminated path #' */
+ int len = strlen (new_value);
+ while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1]))
+ {
+ new_value[len-1] = '\0';
+ }
+ lt_setenv (name, new_value);
+ XFREE (new_value);
+ }
+}
+
+void
+lt_update_lib_path (const char *name, const char *value)
+{
+ lt_debugprintf (__FILE__, __LINE__,
+ "(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
+ nonnull (name), nonnull (value));
+
+ if (name && *name && value && *value)
+ {
+ char *new_value = lt_extend_str (getenv (name), value, 0);
+ lt_setenv (name, new_value);
+ XFREE (new_value);
+ }
+}
+
+EOF
+ case $host_os in
+ mingw*)
+ cat <<"EOF"
+
+/* Prepares an argument vector before calling spawn().
+ Note that spawn() does not by itself call the command interpreter
+ (getenv ("COMSPEC") != NULL ? getenv ("COMSPEC") :
+ ({ OSVERSIONINFO v; v.dwOSVersionInfoSize = sizeof(OSVERSIONINFO);
+ GetVersionEx(&v);
+ v.dwPlatformId == VER_PLATFORM_WIN32_NT;
+ }) ? "cmd.exe" : "command.com").
+ Instead it simply concatenates the arguments, separated by ' ', and calls
+ CreateProcess(). We must quote the arguments since Win32 CreateProcess()
+ interprets characters like ' ', '\t', '\\', '"' (but not '<' and '>') in a
+ special way:
+ - Space and tab are interpreted as delimiters. They are not treated as
+ delimiters if they are surrounded by double quotes: "...".
+ - Unescaped double quotes are removed from the input. Their only effect is
+ that within double quotes, space and tab are treated like normal
+ characters.
+ - Backslashes not followed by double quotes are not special.
+ - But 2*n+1 backslashes followed by a double quote become
+ n backslashes followed by a double quote (n >= 0):
+ \" -> "
+ \\\" -> \"
+ \\\\\" -> \\"
+ */
+#define SHELL_SPECIAL_CHARS "\"\\ \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
+#define SHELL_SPACE_CHARS " \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
+char **
+prepare_spawn (char **argv)
+{
+ size_t argc;
+ char **new_argv;
+ size_t i;
+
+ /* Count number of arguments. */
+ for (argc = 0; argv[argc] != NULL; argc++)
+ ;
+
+ /* Allocate new argument vector. */
+ new_argv = XMALLOC (char *, argc + 1);
+
+ /* Put quoted arguments into the new argument vector. */
+ for (i = 0; i < argc; i++)
+ {
+ const char *string = argv[i];
+
+ if (string[0] == '\0')
+ new_argv[i] = xstrdup ("\"\"");
+ else if (strpbrk (string, SHELL_SPECIAL_CHARS) != NULL)
+ {
+ int quote_around = (strpbrk (string, SHELL_SPACE_CHARS) != NULL);
+ size_t length;
+ unsigned int backslashes;
+ const char *s;
+ char *quoted_string;
+ char *p;
+
+ length = 0;
+ backslashes = 0;
+ if (quote_around)
+ length++;
+ for (s = string; *s != '\0'; s++)
+ {
+ char c = *s;
+ if (c == '"')
+ length += backslashes + 1;
+ length++;
+ if (c == '\\')
+ backslashes++;
+ else
+ backslashes = 0;
+ }
+ if (quote_around)
+ length += backslashes + 1;
+
+ quoted_string = XMALLOC (char, length + 1);
+
+ p = quoted_string;
+ backslashes = 0;
+ if (quote_around)
+ *p++ = '"';
+ for (s = string; *s != '\0'; s++)
+ {
+ char c = *s;
+ if (c == '"')
+ {
+ unsigned int j;
+ for (j = backslashes + 1; j > 0; j--)
+ *p++ = '\\';
+ }
+ *p++ = c;
+ if (c == '\\')
+ backslashes++;
+ else
+ backslashes = 0;
+ }
+ if (quote_around)
+ {
+ unsigned int j;
+ for (j = backslashes; j > 0; j--)
+ *p++ = '\\';
+ *p++ = '"';
+ }
+ *p = '\0';
+
+ new_argv[i] = quoted_string;
+ }
+ else
+ new_argv[i] = (char *) string;
+ }
+ new_argv[argc] = NULL;
+
+ return new_argv;
+}
+EOF
+ ;;
+ esac
+
+ cat <<"EOF"
+void lt_dump_script (FILE* f)
+{
+EOF
+ func_emit_wrapper yes |
+ $SED -n -e '
+s/^\(.\{79\}\)\(..*\)/\1\
+\2/
+h
+s/\([\\"]\)/\\\1/g
+s/$/\\n/
+s/\([^\n]*\).*/ fputs ("\1", f);/p
+g
+D'
+ cat <<"EOF"
+}
+EOF
+}
+# end: func_emit_cwrapperexe_src
+
+# func_win32_import_lib_p ARG
+# True if ARG is an import lib, as indicated by $file_magic_cmd
+func_win32_import_lib_p ()
+{
+ $opt_debug
+ case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in
+ *import*) : ;;
+ *) false ;;
+ esac
+}
+
+# func_mode_link arg...
+func_mode_link ()
+{
+ $opt_debug
case $host in
- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
# It is impossible to link a dll without this setting, and
# we shouldn't force the makefile maintainer to figure out
# which system we are compiling for in order to pass an extra
@@ -1150,10 +5145,10 @@
allow_undefined=yes
;;
esac
- libtool_args="$nonopt"
+ libtool_args=$nonopt
base_compile="$nonopt $@"
- compile_command="$nonopt"
- finalize_command="$nonopt"
+ compile_command=$nonopt
+ finalize_command=$nonopt
compile_rpath=
finalize_rpath=
@@ -1168,8 +5163,10 @@
dllsearchpath=
lib_search_path=`pwd`
inst_prefix_dir=
+ new_inherited_linker_flags=
avoid_version=no
+ bindir=
dlfiles=
dlprefiles=
dlself=no
@@ -1183,7 +5180,6 @@
no_install=no
objs=
non_pic_objects=
- notinst_path= # paths that contain not-installed libtool libraries
precious_files_regex=
prefer_static_libs=no
preload=no
@@ -1197,8 +5193,8 @@
thread_safe=no
vinfo=
vinfo_number=no
+ weak_libs=
single_module="${wl}-single_module"
-
func_infer_tag $base_compile
# We need to know -static, to get the right output filenames.
@@ -1205,11 +5201,17 @@
for arg
do
case $arg in
+ -shared)
+ test "$build_libtool_libs" != yes && \
+ func_fatal_configuration "can not build a shared library"
+ build_old_libs=no
+ break
+ ;;
-all-static | -static | -static-libtool-libs)
case $arg in
-all-static)
if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
- $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2
+ func_warning "complete static linking is impossible in this configuration"
fi
if test -n "$link_static_flag"; then
dlopen_self=$dlopen_self_static
@@ -1243,29 +5245,30 @@
while test "$#" -gt 0; do
arg="$1"
shift
- case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test
- ;;
- *) qarg=$arg ;;
- esac
- libtool_args="$libtool_args $qarg"
+ func_quote_for_eval "$arg"
+ qarg=$func_quote_for_eval_unquoted_result
+ func_append libtool_args " $func_quote_for_eval_result"
# If the previous option needs an argument, assign it.
if test -n "$prev"; then
case $prev in
output)
- compile_command="$compile_command @OUTPUT@"
- finalize_command="$finalize_command @OUTPUT@"
+ func_append compile_command " @OUTPUT@"
+ func_append finalize_command " @OUTPUT@"
;;
esac
case $prev in
+ bindir)
+ bindir="$arg"
+ prev=
+ continue
+ ;;
dlfiles|dlprefiles)
if test "$preload" = no; then
# Add the symbol object into the linking commands.
- compile_command="$compile_command @SYMFILE@"
- finalize_command="$finalize_command @SYMFILE@"
+ func_append compile_command " @SYMFILE@"
+ func_append finalize_command " @SYMFILE@"
preload=yes
fi
case $arg in
@@ -1292,9 +5295,9 @@
;;
*)
if test "$prev" = dlfiles; then
- dlfiles="$dlfiles $arg"
+ func_append dlfiles " $arg"
else
- dlprefiles="$dlprefiles $arg"
+ func_append dlprefiles " $arg"
fi
prev=
continue
@@ -1303,10 +5306,8 @@
;;
expsyms)
export_symbols="$arg"
- if test ! -f "$arg"; then
- $echo "$modename: symbol file \`$arg' does not exist"
- exit $EXIT_FAILURE
- fi
+ test -f "$arg" \
+ || func_fatal_error "symbol file \`$arg' does not exist"
prev=
continue
;;
@@ -1315,58 +5316,52 @@
prev=
continue
;;
- inst_prefix)
- inst_prefix_dir="$arg"
+ framework)
+ case $host in
+ *-*-darwin*)
+ case "$deplibs " in
+ *" $qarg.ltframework "*) ;;
+ *) func_append deplibs " $qarg.ltframework" # this is fixed later
+ ;;
+ esac
+ ;;
+ esac
prev=
continue
;;
- precious_regex)
- precious_files_regex="$arg"
+ inst_prefix)
+ inst_prefix_dir="$arg"
prev=
continue
;;
- release)
- release="-$arg"
- prev=
- continue
- ;;
objectlist)
if test -f "$arg"; then
save_arg=$arg
moreargs=
- for fil in `cat $save_arg`
+ for fil in `cat "$save_arg"`
do
-# moreargs="$moreargs $fil"
+# func_append moreargs " $fil"
arg=$fil
# A libtool-controlled object.
# Check to see that this really is a libtool object.
- if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+ if func_lalib_unsafe_p "$arg"; then
pic_object=
non_pic_object=
# Read the .lo file
- # If there is no directory component, then add one.
- case $arg in
- */* | *\\*) . $arg ;;
- *) . ./$arg ;;
- esac
+ func_source "$arg"
- if test -z "$pic_object" || \
+ if test -z "$pic_object" ||
test -z "$non_pic_object" ||
- test "$pic_object" = none && \
+ test "$pic_object" = none &&
test "$non_pic_object" = none; then
- $echo "$modename: cannot find name of object for \`$arg'" 1>&2
- exit $EXIT_FAILURE
+ func_fatal_error "cannot find name of object for \`$arg'"
fi
# Extract subdirectory from the argument.
- xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
- if test "X$xdir" = "X$arg"; then
- xdir=
- else
- xdir="$xdir/"
- fi
+ func_dirname "$arg" "/" ""
+ xdir="$func_dirname_result"
if test "$pic_object" != none; then
# Prepend the subdirectory the object is found in.
@@ -1374,7 +5369,7 @@
if test "$prev" = dlfiles; then
if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
- dlfiles="$dlfiles $pic_object"
+ func_append dlfiles " $pic_object"
prev=
continue
else
@@ -1386,12 +5381,12 @@
# CHECK ME: I think I busted this. -Ossama
if test "$prev" = dlprefiles; then
# Preload the old-style object.
- dlprefiles="$dlprefiles $pic_object"
+ func_append dlprefiles " $pic_object"
prev=
fi
# A PIC object.
- libobjs="$libobjs $pic_object"
+ func_append libobjs " $pic_object"
arg="$pic_object"
fi
@@ -1401,7 +5396,7 @@
non_pic_object="$xdir$non_pic_object"
# A standard non-PIC object
- non_pic_objects="$non_pic_objects $non_pic_object"
+ func_append non_pic_objects " $non_pic_object"
if test -z "$pic_object" || test "$pic_object" = none ; then
arg="$non_pic_object"
fi
@@ -1409,95 +5404,95 @@
# If the PIC object exists, use it instead.
# $xdir was prepended to $pic_object above.
non_pic_object="$pic_object"
- non_pic_objects="$non_pic_objects $non_pic_object"
+ func_append non_pic_objects " $non_pic_object"
fi
else
# Only an error if not doing a dry-run.
- if test -z "$run"; then
- $echo "$modename: \`$arg' is not a valid libtool object" 1>&2
- exit $EXIT_FAILURE
- else
- # Dry-run case.
-
+ if $opt_dry_run; then
# Extract subdirectory from the argument.
- xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
- if test "X$xdir" = "X$arg"; then
- xdir=
- else
- xdir="$xdir/"
- fi
+ func_dirname "$arg" "/" ""
+ xdir="$func_dirname_result"
- pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`
- non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`
- libobjs="$libobjs $pic_object"
- non_pic_objects="$non_pic_objects $non_pic_object"
+ func_lo2o "$arg"
+ pic_object=$xdir$objdir/$func_lo2o_result
+ non_pic_object=$xdir$func_lo2o_result
+ func_append libobjs " $pic_object"
+ func_append non_pic_objects " $non_pic_object"
+ else
+ func_fatal_error "\`$arg' is not a valid libtool object"
fi
fi
done
else
- $echo "$modename: link input file \`$save_arg' does not exist"
- exit $EXIT_FAILURE
+ func_fatal_error "link input file \`$arg' does not exist"
fi
arg=$save_arg
prev=
continue
;;
+ precious_regex)
+ precious_files_regex="$arg"
+ prev=
+ continue
+ ;;
+ release)
+ release="-$arg"
+ prev=
+ continue
+ ;;
rpath | xrpath)
# We need an absolute path.
case $arg in
[\\/]* | [A-Za-z]:[\\/]*) ;;
*)
- $echo "$modename: only absolute run-paths are allowed" 1>&2
- exit $EXIT_FAILURE
+ func_fatal_error "only absolute run-paths are allowed"
;;
esac
if test "$prev" = rpath; then
case "$rpath " in
*" $arg "*) ;;
- *) rpath="$rpath $arg" ;;
+ *) func_append rpath " $arg" ;;
esac
else
case "$xrpath " in
*" $arg "*) ;;
- *) xrpath="$xrpath $arg" ;;
+ *) func_append xrpath " $arg" ;;
esac
fi
prev=
continue
;;
- xcompiler)
- compiler_flags="$compiler_flags $qarg"
+ shrext)
+ shrext_cmds="$arg"
prev=
- compile_command="$compile_command $qarg"
- finalize_command="$finalize_command $qarg"
continue
;;
- xlinker)
- linker_flags="$linker_flags $qarg"
- compiler_flags="$compiler_flags $wl$qarg"
+ weak)
+ func_append weak_libs " $arg"
prev=
- compile_command="$compile_command $wl$qarg"
- finalize_command="$finalize_command $wl$qarg"
continue
;;
xcclinker)
- linker_flags="$linker_flags $qarg"
- compiler_flags="$compiler_flags $qarg"
+ func_append linker_flags " $qarg"
+ func_append compiler_flags " $qarg"
prev=
- compile_command="$compile_command $qarg"
- finalize_command="$finalize_command $qarg"
+ func_append compile_command " $qarg"
+ func_append finalize_command " $qarg"
continue
;;
- shrext)
- shrext_cmds="$arg"
+ xcompiler)
+ func_append compiler_flags " $qarg"
prev=
+ func_append compile_command " $qarg"
+ func_append finalize_command " $qarg"
continue
;;
- darwin_framework|darwin_framework_skip)
- test "$prev" = "darwin_framework" && compiler_flags="$compiler_flags $arg"
- compile_command="$compile_command $arg"
- finalize_command="$finalize_command $arg"
+ xlinker)
+ func_append linker_flags " $qarg"
+ func_append compiler_flags " $wl$qarg"
prev=
+ func_append compile_command " $wl$qarg"
+ func_append finalize_command " $wl$qarg"
continue
;;
*)
@@ -1513,8 +5508,9 @@
case $arg in
-all-static)
if test -n "$link_static_flag"; then
- compile_command="$compile_command $link_static_flag"
- finalize_command="$finalize_command $link_static_flag"
+ # See comment for -static flag below, for more details.
+ func_append compile_command " $link_static_flag"
+ func_append finalize_command " $link_static_flag"
fi
continue
;;
@@ -1521,8 +5517,7 @@
-allow-undefined)
# FIXME: remove this flag sometime in the future.
- $echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2
- continue
+ func_fatal_error "\`-allow-undefined' must not be used because it is the default"
;;
-avoid-version)
@@ -1530,6 +5525,11 @@
continue
;;
+ -bindir)
+ prev=bindir
+ continue
+ ;;
+
-dlopen)
prev=dlfiles
continue
@@ -1547,8 +5547,7 @@
-export-symbols | -export-symbols-regex)
if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
- $echo "$modename: more than one -exported-symbols argument is not allowed"
- exit $EXIT_FAILURE
+ func_fatal_error "more than one -exported-symbols argument is not allowed"
fi
if test "X$arg" = "X-export-symbols"; then
prev=expsyms
@@ -1558,15 +5557,8 @@
continue
;;
- -framework|-arch|-isysroot)
- case " $CC " in
- *" ${arg} ${1} "* | *" ${arg} ${1} "*)
- prev=darwin_framework_skip ;;
- *) compiler_flags="$compiler_flags $arg"
- prev=darwin_framework ;;
- esac
- compile_command="$compile_command $arg"
- finalize_command="$finalize_command $arg"
+ -framework)
+ prev=framework
continue
;;
@@ -1580,8 +5572,8 @@
-L[A-Z][A-Z]*:*)
case $with_gcc/$host in
no/*-*-irix* | /*-*-irix*)
- compile_command="$compile_command $arg"
- finalize_command="$finalize_command $arg"
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
;;
esac
continue
@@ -1588,40 +5580,55 @@
;;
-L*)
- dir=`$echo "X$arg" | $Xsed -e 's/^-L//'`
+ func_stripname "-L" '' "$arg"
+ if test -z "$func_stripname_result"; then
+ if test "$#" -gt 0; then
+ func_fatal_error "require no space between \`-L' and \`$1'"
+ else
+ func_fatal_error "need path for \`-L' option"
+ fi
+ fi
+ func_resolve_sysroot "$func_stripname_result"
+ dir=$func_resolve_sysroot_result
# We need an absolute path.
case $dir in
[\\/]* | [A-Za-z]:[\\/]*) ;;
*)
absdir=`cd "$dir" && pwd`
- if test -z "$absdir"; then
- $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2
- absdir="$dir"
- notinst_path="$notinst_path $dir"
- fi
+ test -z "$absdir" && \
+ func_fatal_error "cannot determine absolute directory name of \`$dir'"
dir="$absdir"
;;
esac
case "$deplibs " in
- *" -L$dir "*) ;;
+ *" -L$dir "* | *" $arg "*)
+ # Will only happen for absolute or sysroot arguments
+ ;;
*)
- deplibs="$deplibs -L$dir"
- lib_search_path="$lib_search_path $dir"
+ # Preserve sysroot, but never include relative directories
+ case $dir in
+ [\\/]* | [A-Za-z]:[\\/]* | =*) func_append deplibs " $arg" ;;
+ *) func_append deplibs " -L$dir" ;;
+ esac
+ func_append lib_search_path " $dir"
;;
esac
case $host in
- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
- testbindir=`$echo "X$dir" | $Xsed -e 's*/lib$*/bin*'`
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
+ testbindir=`$ECHO "$dir" | $SED 's*/lib$*/bin*'`
case :$dllsearchpath: in
*":$dir:"*) ;;
- *) dllsearchpath="$dllsearchpath:$dir";;
+ ::) dllsearchpath=$dir;;
+ *) func_append dllsearchpath ":$dir";;
esac
case :$dllsearchpath: in
*":$testbindir:"*) ;;
- *) dllsearchpath="$dllsearchpath:$testbindir";;
+ ::) dllsearchpath=$testbindir;;
+ *) func_append dllsearchpath ":$testbindir";;
esac
;;
esac
+ deplibs="$deplibs $arg"
continue
;;
@@ -1628,7 +5635,7 @@
-l*)
if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
case $host in
- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos*)
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*)
# These systems don't actually have a C or math library (as such)
continue
;;
@@ -1642,7 +5649,7 @@
;;
*-*-rhapsody* | *-*-darwin1.[012])
# Rhapsody C and math libraries are in the System framework
- deplibs="$deplibs -framework System"
+ func_append deplibs " System.ltframework"
continue
;;
*-*-sco3.2v5* | *-*-sco5v6*)
@@ -1662,25 +5669,35 @@
;;
esac
fi
- deplibs="$deplibs $arg"
+ func_append deplibs " $arg"
continue
;;
+ -module)
+ module=yes
+ continue
+ ;;
+
# Tru64 UNIX uses -model [arg] to determine the layout of C++
# classes, name mangling, and exception handling.
- -model)
- compile_command="$compile_command $arg"
- compiler_flags="$compiler_flags $arg"
- finalize_command="$finalize_command $arg"
+ # Darwin uses the -arch flag to determine output architecture.
+ -model|-arch|-isysroot|--sysroot)
+ func_append compiler_flags " $arg"
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
prev=xcompiler
continue
;;
- -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
- compiler_flags="$compiler_flags $arg"
- compile_command="$compile_command $arg"
- finalize_command="$finalize_command $arg"
- deplibs="$deplibs $arg"
+ -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \
+ |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*)
+ func_append compiler_flags " $arg"
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
+ case "$new_inherited_linker_flags " in
+ *" $arg "*) ;;
+ * ) func_append new_inherited_linker_flags " $arg" ;;
+ esac
continue
;;
@@ -1689,44 +5706,6 @@
continue
;;
- -module)
- module=yes
- continue
- ;;
-
- # -64, -mips[0-9] enable 64-bit mode on the SGI compiler
- # -r[0-9][0-9]* specifies the processor on the SGI compiler
- # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler
- # +DA*, +DD* enable 64-bit mode on the HP compiler
- # -q* pass through compiler args for the IBM compiler
- # -m* pass through architecture-specific compiler args for GCC
- # -m*, -t[45]*, -txscale* pass through architecture-specific
- # compiler args for GCC
- # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC
- # -F/path gives path to uninstalled frameworks, gcc on darwin
- # @file GCC response files
- -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
- -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*)
-
- # Unknown arguments in both finalize_command and compile_command need
- # to be aesthetically quoted because they are evaled later.
- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
- case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- arg="\"$arg\""
- ;;
- esac
- compile_command="$compile_command $arg"
- finalize_command="$finalize_command $arg"
- compiler_flags="$compiler_flags $arg"
- continue
- ;;
-
- -shrext)
- prev=shrext
- continue
- ;;
-
-no-fast-install)
fast_install=no
continue
@@ -1734,11 +5713,11 @@
-no-install)
case $host in
- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin*)
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*)
# The PATH hackery in wrapper scripts is required on Windows
# and Darwin in order for the loader to find any dlls it needs.
- $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2
- $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2
+ func_warning "\`-no-install' is ignored for $host"
+ func_warning "assuming \`-no-fast-install' instead"
fast_install=no
;;
*) no_install=yes ;;
@@ -1779,22 +5758,36 @@
;;
-R*)
- dir=`$echo "X$arg" | $Xsed -e 's/^-R//'`
+ func_stripname '-R' '' "$arg"
+ dir=$func_stripname_result
# We need an absolute path.
case $dir in
[\\/]* | [A-Za-z]:[\\/]*) ;;
+ =*)
+ func_stripname '=' '' "$dir"
+ dir=$lt_sysroot$func_stripname_result
+ ;;
*)
- $echo "$modename: only absolute run-paths are allowed" 1>&2
- exit $EXIT_FAILURE
+ func_fatal_error "only absolute run-paths are allowed"
;;
esac
case "$xrpath " in
*" $dir "*) ;;
- *) xrpath="$xrpath $dir" ;;
+ *) func_append xrpath " $dir" ;;
esac
continue
;;
+ -shared)
+ # The effects of -shared are defined in a previous loop.
+ continue
+ ;;
+
+ -shrext)
+ prev=shrext
+ continue
+ ;;
+
-static | -static-libtool-libs)
# The effects of -static are defined in a previous loop.
# We used to do the same as -all-static on platforms that
@@ -1813,6 +5806,7 @@
prev=vinfo
continue
;;
+
-version-number)
prev=vinfo
vinfo_number=yes
@@ -1819,41 +5813,42 @@
continue
;;
+ -weak)
+ prev=weak
+ continue
+ ;;
+
-Wc,*)
- args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'`
+ func_stripname '-Wc,' '' "$arg"
+ args=$func_stripname_result
arg=
save_ifs="$IFS"; IFS=','
for flag in $args; do
IFS="$save_ifs"
- case $flag in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- flag="\"$flag\""
- ;;
- esac
- arg="$arg $wl$flag"
- compiler_flags="$compiler_flags $flag"
+ func_quote_for_eval "$flag"
+ func_append arg " $func_quote_for_eval_result"
+ func_append compiler_flags " $func_quote_for_eval_result"
done
IFS="$save_ifs"
- arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
+ func_stripname ' ' '' "$arg"
+ arg=$func_stripname_result
;;
-Wl,*)
- args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'`
+ func_stripname '-Wl,' '' "$arg"
+ args=$func_stripname_result
arg=
save_ifs="$IFS"; IFS=','
for flag in $args; do
IFS="$save_ifs"
- case $flag in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- flag="\"$flag\""
- ;;
- esac
- arg="$arg $wl$flag"
- compiler_flags="$compiler_flags $wl$flag"
- linker_flags="$linker_flags $flag"
+ func_quote_for_eval "$flag"
+ func_append arg " $wl$func_quote_for_eval_result"
+ func_append compiler_flags " $wl$func_quote_for_eval_result"
+ func_append linker_flags " $func_quote_for_eval_result"
done
IFS="$save_ifs"
- arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
+ func_stripname ' ' '' "$arg"
+ arg=$func_stripname_result
;;
-Xcompiler)
@@ -1871,21 +5866,45 @@
continue
;;
+ # -msg_* for osf cc
+ -msg_*)
+ func_quote_for_eval "$arg"
+ arg="$func_quote_for_eval_result"
+ ;;
+
+ # Flags to be passed through unchanged, with rationale:
+ # -64, -mips[0-9] enable 64-bit mode for the SGI compiler
+ # -r[0-9][0-9]* specify processor for the SGI compiler
+ # -xarch=*, -xtarget=* enable 64-bit mode for the Sun compiler
+ # +DA*, +DD* enable 64-bit mode for the HP compiler
+ # -q* compiler args for the IBM compiler
+ # -m*, -t[45]*, -txscale* architecture-specific flags for GCC
+ # -F/path path to uninstalled frameworks, gcc on darwin
+ # -p, -pg, --coverage, -fprofile-* profiling flags for GCC
+ # @file GCC response files
+ # -tp=* Portland pgcc target processor selection
+ # --sysroot=* for sysroot support
+ # -O*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization
+ -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
+ -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \
+ -O*|-flto*|-fwhopr*|-fuse-linker-plugin)
+ func_quote_for_eval "$arg"
+ arg="$func_quote_for_eval_result"
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
+ func_append compiler_flags " $arg"
+ continue
+ ;;
+
# Some other compiler flag.
-* | +*)
- # Unknown arguments in both finalize_command and compile_command need
- # to be aesthetically quoted because they are evaled later.
- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
- case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- arg="\"$arg\""
- ;;
- esac
+ func_quote_for_eval "$arg"
+ arg="$func_quote_for_eval_result"
;;
*.$objext)
# A standard object.
- objs="$objs $arg"
+ func_append objs " $arg"
;;
*.lo)
@@ -1892,32 +5911,23 @@
# A libtool-controlled object.
# Check to see that this really is a libtool object.
- if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+ if func_lalib_unsafe_p "$arg"; then
pic_object=
non_pic_object=
# Read the .lo file
- # If there is no directory component, then add one.
- case $arg in
- */* | *\\*) . $arg ;;
- *) . ./$arg ;;
- esac
+ func_source "$arg"
- if test -z "$pic_object" || \
+ if test -z "$pic_object" ||
test -z "$non_pic_object" ||
- test "$pic_object" = none && \
+ test "$pic_object" = none &&
test "$non_pic_object" = none; then
- $echo "$modename: cannot find name of object for \`$arg'" 1>&2
- exit $EXIT_FAILURE
+ func_fatal_error "cannot find name of object for \`$arg'"
fi
# Extract subdirectory from the argument.
- xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
- if test "X$xdir" = "X$arg"; then
- xdir=
- else
- xdir="$xdir/"
- fi
+ func_dirname "$arg" "/" ""
+ xdir="$func_dirname_result"
if test "$pic_object" != none; then
# Prepend the subdirectory the object is found in.
@@ -1925,7 +5935,7 @@
if test "$prev" = dlfiles; then
if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
- dlfiles="$dlfiles $pic_object"
+ func_append dlfiles " $pic_object"
prev=
continue
else
@@ -1937,12 +5947,12 @@
# CHECK ME: I think I busted this. -Ossama
if test "$prev" = dlprefiles; then
# Preload the old-style object.
- dlprefiles="$dlprefiles $pic_object"
+ func_append dlprefiles " $pic_object"
prev=
fi
# A PIC object.
- libobjs="$libobjs $pic_object"
+ func_append libobjs " $pic_object"
arg="$pic_object"
fi
@@ -1952,7 +5962,7 @@
non_pic_object="$xdir$non_pic_object"
# A standard non-PIC object
- non_pic_objects="$non_pic_objects $non_pic_object"
+ func_append non_pic_objects " $non_pic_object"
if test -z "$pic_object" || test "$pic_object" = none ; then
arg="$non_pic_object"
fi
@@ -1960,28 +5970,22 @@
# If the PIC object exists, use it instead.
# $xdir was prepended to $pic_object above.
non_pic_object="$pic_object"
- non_pic_objects="$non_pic_objects $non_pic_object"
+ func_append non_pic_objects " $non_pic_object"
fi
else
# Only an error if not doing a dry-run.
- if test -z "$run"; then
- $echo "$modename: \`$arg' is not a valid libtool object" 1>&2
- exit $EXIT_FAILURE
- else
- # Dry-run case.
-
+ if $opt_dry_run; then
# Extract subdirectory from the argument.
- xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
- if test "X$xdir" = "X$arg"; then
- xdir=
- else
- xdir="$xdir/"
- fi
+ func_dirname "$arg" "/" ""
+ xdir="$func_dirname_result"
- pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`
- non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`
- libobjs="$libobjs $pic_object"
- non_pic_objects="$non_pic_objects $non_pic_object"
+ func_lo2o "$arg"
+ pic_object=$xdir$objdir/$func_lo2o_result
+ non_pic_object=$xdir$func_lo2o_result
+ func_append libobjs " $pic_object"
+ func_append non_pic_objects " $non_pic_object"
+ else
+ func_fatal_error "\`$arg' is not a valid libtool object"
fi
fi
;;
@@ -1988,8 +5992,8 @@
*.$libext)
# An archive.
- deplibs="$deplibs $arg"
- old_deplibs="$old_deplibs $arg"
+ func_append deplibs " $arg"
+ func_append old_deplibs " $arg"
continue
;;
@@ -1996,16 +6000,17 @@
*.la)
# A libtool-controlled library.
+ func_resolve_sysroot "$arg"
if test "$prev" = dlfiles; then
# This library was specified with -dlopen.
- dlfiles="$dlfiles $arg"
+ func_append dlfiles " $func_resolve_sysroot_result"
prev=
elif test "$prev" = dlprefiles; then
# The library was specified with -dlpreopen.
- dlprefiles="$dlprefiles $arg"
+ func_append dlprefiles " $func_resolve_sysroot_result"
prev=
else
- deplibs="$deplibs $arg"
+ func_append deplibs " $func_resolve_sysroot_result"
fi
continue
;;
@@ -2014,42 +6019,36 @@
*)
# Unknown arguments in both finalize_command and compile_command need
# to be aesthetically quoted because they are evaled later.
- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
- case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- arg="\"$arg\""
- ;;
- esac
+ func_quote_for_eval "$arg"
+ arg="$func_quote_for_eval_result"
;;
esac # arg
# Now actually substitute the argument into the commands.
if test -n "$arg"; then
- compile_command="$compile_command $arg"
- finalize_command="$finalize_command $arg"
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
fi
done # argument parsing loop
- if test -n "$prev"; then
- $echo "$modename: the \`$prevarg' option requires an argument" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
+ test -n "$prev" && \
+ func_fatal_help "the \`$prevarg' option requires an argument"
if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
eval arg=\"$export_dynamic_flag_spec\"
- compile_command="$compile_command $arg"
- finalize_command="$finalize_command $arg"
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
fi
oldlibs=
# calculate the name of the file, without its directory
- outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'`
+ func_basename "$output"
+ outputname="$func_basename_result"
libobjs_save="$libobjs"
if test -n "$shlibpath_var"; then
# get the directories listed in $shlibpath_var
- eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
+ eval shlib_search_path=\`\$ECHO \"\${$shlibpath_var}\" \| \$SED \'s/:/ /g\'\`
else
shlib_search_path=
fi
@@ -2056,28 +6055,17 @@
eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
- output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'`
- if test "X$output_objdir" = "X$output"; then
- output_objdir="$objdir"
- else
- output_objdir="$output_objdir/$objdir"
- fi
+ func_dirname "$output" "/" ""
+ output_objdir="$func_dirname_result$objdir"
+ func_to_tool_file "$output_objdir/"
+ tool_output_objdir=$func_to_tool_file_result
# Create the object directory.
- if test ! -d "$output_objdir"; then
- $show "$mkdir $output_objdir"
- $run $mkdir $output_objdir
- exit_status=$?
- if test "$exit_status" -ne 0 && test ! -d "$output_objdir"; then
- exit $exit_status
- fi
- fi
+ func_mkdir_p "$output_objdir"
# Determine the type of output
case $output in
"")
- $echo "$modename: you must specify an output file" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
+ func_fatal_help "you must specify an output file"
;;
*.$libext) linkmode=oldlib ;;
*.lo | *.$objext) linkmode=obj ;;
@@ -2085,15 +6073,6 @@
*) linkmode=prog ;; # Anything else should be a program.
esac
- case $host in
- *cygwin* | *mingw* | *pw32*)
- # don't eliminate duplications in $postdeps and $predeps
- duplicate_compiler_generated_deps=yes
- ;;
- *)
- duplicate_compiler_generated_deps=$duplicate_deps
- ;;
- esac
specialdeplibs=
libs=
@@ -2100,12 +6079,12 @@
# Find all interdependent deplibs by searching for libraries
# that are linked more than once (e.g. -la -lb -la)
for deplib in $deplibs; do
- if test "X$duplicate_deps" = "Xyes" ; then
+ if $opt_preserve_dup_deps ; then
case "$libs " in
- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+ *" $deplib "*) func_append specialdeplibs " $deplib" ;;
esac
fi
- libs="$libs $deplib"
+ func_append libs " $deplib"
done
if test "$linkmode" = lib; then
@@ -2115,12 +6094,12 @@
# $postdeps and mark them as special (i.e., whose duplicates are
# not to be eliminated).
pre_post_deps=
- if test "X$duplicate_compiler_generated_deps" = "Xyes" ; then
+ if $opt_duplicate_compiler_generated_deps; then
for pre_post_dep in $predeps $postdeps; do
case "$pre_post_deps " in
- *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;;
+ *" $pre_post_dep "*) func_append specialdeplibs " $pre_post_deps" ;;
esac
- pre_post_deps="$pre_post_deps $pre_post_dep"
+ func_append pre_post_deps " $pre_post_dep"
done
fi
pre_post_deps=
@@ -2131,15 +6110,16 @@
newlib_search_path=
need_relink=no # whether we're linking any uninstalled libtool libraries
notinst_deplibs= # not-installed libtool libraries
+ notinst_path= # paths that contain not-installed libtool libraries
+
case $linkmode in
lib)
- passes="conv link"
+ passes="conv dlpreopen link"
for file in $dlfiles $dlprefiles; do
case $file in
*.la) ;;
*)
- $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2
- exit $EXIT_FAILURE
+ func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file"
;;
esac
done
@@ -2155,7 +6135,20 @@
*) passes="conv"
;;
esac
+
for pass in $passes; do
+ # The preopen pass in lib mode reverses $deplibs; put it back here
+ # so that -L comes before libs that need it for instance...
+ if test "$linkmode,$pass" = "lib,link"; then
+ ## FIXME: Find the place where the list is rebuilt in the wrong
+ ## order, and fix it there properly
+ tmp_deplibs=
+ for deplib in $deplibs; do
+ tmp_deplibs="$deplib $tmp_deplibs"
+ done
+ deplibs="$tmp_deplibs"
+ fi
+
if test "$linkmode,$pass" = "lib,link" ||
test "$linkmode,$pass" = "prog,scan"; then
libs="$deplibs"
@@ -2168,21 +6161,46 @@
link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
esac
fi
+ if test "$linkmode,$pass" = "lib,dlpreopen"; then
+ # Collect and forward deplibs of preopened libtool libs
+ for lib in $dlprefiles; do
+ # Ignore non-libtool-libs
+ dependency_libs=
+ func_resolve_sysroot "$lib"
+ case $lib in
+ *.la) func_source "$func_resolve_sysroot_result" ;;
+ esac
+
+ # Collect preopened libtool deplibs, except any this library
+ # has declared as weak libs
+ for deplib in $dependency_libs; do
+ func_basename "$deplib"
+ deplib_base=$func_basename_result
+ case " $weak_libs " in
+ *" $deplib_base "*) ;;
+ *) func_append deplibs " $deplib" ;;
+ esac
+ done
+ done
+ libs="$dlprefiles"
+ fi
if test "$pass" = dlopen; then
# Collect dlpreopened libraries
save_deplibs="$deplibs"
deplibs=
fi
+
for deplib in $libs; do
lib=
found=no
case $deplib in
- -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
+ -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \
+ |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*)
if test "$linkmode,$pass" = "prog,link"; then
compile_deplibs="$deplib $compile_deplibs"
finalize_deplibs="$deplib $finalize_deplibs"
else
- compiler_flags="$compiler_flags $deplib"
+ func_append compiler_flags " $deplib"
fi
case $linkmode in
@@ -2211,10 +6229,11 @@
;;
-l*)
if test "$linkmode" != lib && test "$linkmode" != prog; then
- $echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2
+ func_warning "\`-l' is ignored for archives/objects"
continue
fi
- name=`$echo "X$deplib" | $Xsed -e 's/^-l//'`
+ func_stripname '-l' '' "$deplib"
+ name=$func_stripname_result
if test "$linkmode" = lib; then
searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path"
else
@@ -2250,21 +6269,17 @@
if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
case " $predeps $postdeps " in
*" $deplib "*)
- if (${SED} -e '2q' $lib |
- grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+ if func_lalib_p "$lib"; then
library_names=
old_library=
- case $lib in
- */* | *\\*) . $lib ;;
- *) . ./$lib ;;
- esac
+ func_source "$lib"
for l in $old_library $library_names; do
ll="$l"
done
if test "X$ll" = "X$old_library" ; then # only static version available
found=no
- ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
- test "X$ladir" = "X$lib" && ladir="."
+ func_dirname "$lib" "" "."
+ ladir="$func_dirname_result"
lib=$ladir/$old_library
if test "$linkmode,$pass" = "prog,link"; then
compile_deplibs="$deplib $compile_deplibs"
@@ -2276,12 +6291,27 @@
continue
fi
fi
- ;;
+ ;;
*) ;;
esac
fi
fi
;; # -l
+ *.ltframework)
+ if test "$linkmode,$pass" = "prog,link"; then
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ else
+ deplibs="$deplib $deplibs"
+ if test "$linkmode" = lib ; then
+ case "$new_inherited_linker_flags " in
+ *" $deplib "*) ;;
+ * ) func_append new_inherited_linker_flags " $deplib" ;;
+ esac
+ fi
+ fi
+ continue
+ ;;
-L*)
case $linkmode in
lib)
@@ -2288,7 +6318,9 @@
deplibs="$deplib $deplibs"
test "$pass" = conv && continue
newdependency_libs="$deplib $newdependency_libs"
- newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
+ func_stripname '-L' '' "$deplib"
+ func_resolve_sysroot "$func_stripname_result"
+ func_append newlib_search_path " $func_resolve_sysroot_result"
;;
prog)
if test "$pass" = conv; then
@@ -2301,10 +6333,12 @@
compile_deplibs="$deplib $compile_deplibs"
finalize_deplibs="$deplib $finalize_deplibs"
fi
- newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
+ func_stripname '-L' '' "$deplib"
+ func_resolve_sysroot "$func_stripname_result"
+ func_append newlib_search_path " $func_resolve_sysroot_result"
;;
*)
- $echo "$modename: warning: \`-L' is ignored for archives/objects" 1>&2
+ func_warning "\`-L' is ignored for archives/objects"
;;
esac # linkmode
continue
@@ -2311,17 +6345,22 @@
;; # -L
-R*)
if test "$pass" = link; then
- dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'`
+ func_stripname '-R' '' "$deplib"
+ func_resolve_sysroot "$func_stripname_result"
+ dir=$func_resolve_sysroot_result
# Make sure the xrpath contains only unique directories.
case "$xrpath " in
*" $dir "*) ;;
- *) xrpath="$xrpath $dir" ;;
+ *) func_append xrpath " $dir" ;;
esac
fi
deplibs="$deplib $deplibs"
continue
;;
- *.la) lib="$deplib" ;;
+ *.la)
+ func_resolve_sysroot "$deplib"
+ lib=$func_resolve_sysroot_result
+ ;;
*.$libext)
if test "$pass" = conv; then
deplibs="$deplib $deplibs"
@@ -2329,35 +6368,41 @@
fi
case $linkmode in
lib)
- valid_a_lib=no
- case $deplibs_check_method in
- match_pattern*)
- set dummy $deplibs_check_method
- match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
- if eval $echo \"$deplib\" 2>/dev/null \
- | $SED 10q \
+ # Linking convenience modules into shared libraries is allowed,
+ # but linking other static libraries is non-portable.
+ case " $dlpreconveniencelibs " in
+ *" $deplib "*) ;;
+ *)
+ valid_a_lib=no
+ case $deplibs_check_method in
+ match_pattern*)
+ set dummy $deplibs_check_method; shift
+ match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
+ if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \
| $EGREP "$match_pattern_regex" > /dev/null; then
+ valid_a_lib=yes
+ fi
+ ;;
+ pass_all)
valid_a_lib=yes
- fi
;;
- pass_all)
- valid_a_lib=yes
- ;;
- esac
- if test "$valid_a_lib" != yes; then
- $echo
- $echo "*** Warning: Trying to link with static lib archive $deplib."
- $echo "*** I have the capability to make that library automatically link in when"
- $echo "*** you link to this library. But I can only do this if you have a"
- $echo "*** shared version of the library, which you do not appear to have"
- $echo "*** because the file extensions .$libext of this argument makes me believe"
- $echo "*** that it is just a static archive that I should not used here."
- else
- $echo
- $echo "*** Warning: Linking the shared library $output against the"
- $echo "*** static library $deplib is not portable!"
- deplibs="$deplib $deplibs"
- fi
+ esac
+ if test "$valid_a_lib" != yes; then
+ echo
+ $ECHO "*** Warning: Trying to link with static lib archive $deplib."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which you do not appear to have"
+ echo "*** because the file extensions .$libext of this argument makes me believe"
+ echo "*** that it is just a static archive that I should not use here."
+ else
+ echo
+ $ECHO "*** Warning: Linking the shared library $output against the"
+ $ECHO "*** static library $deplib is not portable!"
+ deplibs="$deplib $deplibs"
+ fi
+ ;;
+ esac
continue
;;
prog)
@@ -2378,11 +6423,11 @@
if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
# If there is no dlopen support or we're linking statically,
# we need to preload.
- newdlprefiles="$newdlprefiles $deplib"
+ func_append newdlprefiles " $deplib"
compile_deplibs="$deplib $compile_deplibs"
finalize_deplibs="$deplib $finalize_deplibs"
else
- newdlfiles="$newdlfiles $deplib"
+ func_append newdlfiles " $deplib"
fi
fi
continue
@@ -2392,21 +6437,18 @@
continue
;;
esac # case $deplib
+
if test "$found" = yes || test -f "$lib"; then :
else
- $echo "$modename: cannot find the library \`$lib' or unhandled argument \`$deplib'" 1>&2
- exit $EXIT_FAILURE
+ func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'"
fi
# Check to see that this really is a libtool archive.
- if (${SED} -e '2q' $lib | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
- else
- $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
- exit $EXIT_FAILURE
- fi
+ func_lalib_unsafe_p "$lib" \
+ || func_fatal_error "\`$lib' is not a valid libtool archive"
- ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
- test "X$ladir" = "X$lib" && ladir="."
+ func_dirname "$lib" "" "."
+ ladir="$func_dirname_result"
dlname=
dlopen=
@@ -2414,6 +6456,7 @@
libdir=
library_names=
old_library=
+ inherited_linker_flags=
# If the library was installed with an old release of libtool,
# it will not redefine variables installed, or shouldnotlink
installed=yes
@@ -2422,16 +6465,24 @@
# Read the .la file
- case $lib in
- */* | *\\*) . $lib ;;
- *) . ./$lib ;;
- esac
+ func_source "$lib"
+ # Convert "-framework foo" to "foo.ltframework"
+ if test -n "$inherited_linker_flags"; then
+ tmp_inherited_linker_flags=`$ECHO "$inherited_linker_flags" | $SED 's/-framework \([^ $]*\)/\1.ltframework/g'`
+ for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do
+ case " $new_inherited_linker_flags " in
+ *" $tmp_inherited_linker_flag "*) ;;
+ *) func_append new_inherited_linker_flags " $tmp_inherited_linker_flag";;
+ esac
+ done
+ fi
+ dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
if test "$linkmode,$pass" = "lib,link" ||
test "$linkmode,$pass" = "prog,scan" ||
{ test "$linkmode" != prog && test "$linkmode" != lib; }; then
- test -n "$dlopen" && dlfiles="$dlfiles $dlopen"
- test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen"
+ test -n "$dlopen" && func_append dlfiles " $dlopen"
+ test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen"
fi
if test "$pass" = conv; then
@@ -2439,26 +6490,24 @@
deplibs="$lib $deplibs"
if test -z "$libdir"; then
if test -z "$old_library"; then
- $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
- exit $EXIT_FAILURE
+ func_fatal_error "cannot find name of link library for \`$lib'"
fi
# It is a libtool convenience library, so add in its objects.
- convenience="$convenience $ladir/$objdir/$old_library"
- old_convenience="$old_convenience $ladir/$objdir/$old_library"
- tmp_libs=
- for deplib in $dependency_libs; do
- deplibs="$deplib $deplibs"
- if test "X$duplicate_deps" = "Xyes" ; then
- case "$tmp_libs " in
- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
- esac
- fi
- tmp_libs="$tmp_libs $deplib"
- done
+ func_append convenience " $ladir/$objdir/$old_library"
+ func_append old_convenience " $ladir/$objdir/$old_library"
elif test "$linkmode" != prog && test "$linkmode" != lib; then
- $echo "$modename: \`$lib' is not a convenience library" 1>&2
- exit $EXIT_FAILURE
+ func_fatal_error "\`$lib' is not a convenience library"
fi
+ tmp_libs=
+ for deplib in $dependency_libs; do
+ deplibs="$deplib $deplibs"
+ if $opt_preserve_dup_deps ; then
+ case "$tmp_libs " in
+ *" $deplib "*) func_append specialdeplibs " $deplib" ;;
+ esac
+ fi
+ func_append tmp_libs " $deplib"
+ done
continue
fi # $pass = conv
@@ -2465,19 +6514,23 @@
# Get the name of the library we link against.
linklib=
- for l in $old_library $library_names; do
- linklib="$l"
- done
+ if test -n "$old_library" &&
+ { test "$prefer_static_libs" = yes ||
+ test "$prefer_static_libs,$installed" = "built,no"; }; then
+ linklib=$old_library
+ else
+ for l in $old_library $library_names; do
+ linklib="$l"
+ done
+ fi
if test -z "$linklib"; then
- $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
- exit $EXIT_FAILURE
+ func_fatal_error "cannot find name of link library for \`$lib'"
fi
# This library was specified with -dlopen.
if test "$pass" = dlopen; then
if test -z "$libdir"; then
- $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2
- exit $EXIT_FAILURE
+ func_fatal_error "cannot -dlopen a convenience library: \`$lib'"
fi
if test -z "$dlname" ||
test "$dlopen_support" != yes ||
@@ -2486,9 +6539,9 @@
# statically, we need to preload. We also need to preload any
# dependent libraries so libltdl's deplib preloader doesn't
# bomb out in the load deplibs phase.
- dlprefiles="$dlprefiles $lib $dependency_libs"
+ func_append dlprefiles " $lib $dependency_libs"
else
- newdlfiles="$newdlfiles $lib"
+ func_append newdlfiles " $lib"
fi
continue
fi # $pass = dlopen
@@ -2499,24 +6552,25 @@
*)
abs_ladir=`cd "$ladir" && pwd`
if test -z "$abs_ladir"; then
- $echo "$modename: warning: cannot determine absolute directory name of \`$ladir'" 1>&2
- $echo "$modename: passing it literally to the linker, although it might fail" 1>&2
+ func_warning "cannot determine absolute directory name of \`$ladir'"
+ func_warning "passing it literally to the linker, although it might fail"
abs_ladir="$ladir"
fi
;;
esac
- laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
+ func_basename "$lib"
+ laname="$func_basename_result"
# Find the relevant object directory and library name.
if test "X$installed" = Xyes; then
- if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
- $echo "$modename: warning: library \`$lib' was moved." 1>&2
+ if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+ func_warning "library \`$lib' was moved."
dir="$ladir"
absdir="$abs_ladir"
libdir="$abs_ladir"
else
- dir="$libdir"
- absdir="$libdir"
+ dir="$lt_sysroot$libdir"
+ absdir="$lt_sysroot$libdir"
fi
test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
else
@@ -2524,32 +6578,62 @@
dir="$ladir"
absdir="$abs_ladir"
# Remove this search path later
- notinst_path="$notinst_path $abs_ladir"
+ func_append notinst_path " $abs_ladir"
else
dir="$ladir/$objdir"
absdir="$abs_ladir/$objdir"
# Remove this search path later
- notinst_path="$notinst_path $abs_ladir"
+ func_append notinst_path " $abs_ladir"
fi
fi # $installed = yes
- name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
+ func_stripname 'lib' '.la' "$laname"
+ name=$func_stripname_result
# This library was specified with -dlpreopen.
if test "$pass" = dlpreopen; then
- if test -z "$libdir"; then
- $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2
- exit $EXIT_FAILURE
+ if test -z "$libdir" && test "$linkmode" = prog; then
+ func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'"
fi
- # Prefer using a static library (so that no silly _DYNAMIC symbols
- # are required to link).
- if test -n "$old_library"; then
- newdlprefiles="$newdlprefiles $dir/$old_library"
- # Otherwise, use the dlname, so that lt_dlopen finds it.
- elif test -n "$dlname"; then
- newdlprefiles="$newdlprefiles $dir/$dlname"
- else
- newdlprefiles="$newdlprefiles $dir/$linklib"
- fi
+ case "$host" in
+ # special handling for platforms with PE-DLLs.
+ *cygwin* | *mingw* | *cegcc* )
+ # Linker will automatically link against shared library if both
+ # static and shared are present. Therefore, ensure we extract
+ # symbols from the import library if a shared library is present
+ # (otherwise, the dlopen module name will be incorrect). We do
+ # this by putting the import library name into $newdlprefiles.
+ # We recover the dlopen module name by 'saving' the la file
+ # name in a special purpose variable, and (later) extracting the
+ # dlname from the la file.
+ if test -n "$dlname"; then
+ func_tr_sh "$dir/$linklib"
+ eval "libfile_$func_tr_sh_result=\$abs_ladir/\$laname"
+ func_append newdlprefiles " $dir/$linklib"
+ else
+ func_append newdlprefiles " $dir/$old_library"
+ # Keep a list of preopened convenience libraries to check
+ # that they are being used correctly in the link pass.
+ test -z "$libdir" && \
+ func_append dlpreconveniencelibs " $dir/$old_library"
+ fi
+ ;;
+ * )
+ # Prefer using a static library (so that no silly _DYNAMIC symbols
+ # are required to link).
+ if test -n "$old_library"; then
+ func_append newdlprefiles " $dir/$old_library"
+ # Keep a list of preopened convenience libraries to check
+ # that they are being used correctly in the link pass.
+ test -z "$libdir" && \
+ func_append dlpreconveniencelibs " $dir/$old_library"
+ # Otherwise, use the dlname, so that lt_dlopen finds it.
+ elif test -n "$dlname"; then
+ func_append newdlprefiles " $dir/$dlname"
+ else
+ func_append newdlprefiles " $dir/$linklib"
+ fi
+ ;;
+ esac
fi # $pass = dlpreopen
if test -z "$libdir"; then
@@ -2567,7 +6651,7 @@
if test "$linkmode" = prog && test "$pass" != link; then
- newlib_search_path="$newlib_search_path $ladir"
+ func_append newlib_search_path " $ladir"
deplibs="$lib $deplibs"
linkalldeplibs=no
@@ -2579,7 +6663,10 @@
tmp_libs=
for deplib in $dependency_libs; do
case $deplib in
- -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test
+ -L*) func_stripname '-L' '' "$deplib"
+ func_resolve_sysroot "$func_stripname_result"
+ func_append newlib_search_path " $func_resolve_sysroot_result"
+ ;;
esac
# Need to link against all dependency_libs?
if test "$linkalldeplibs" = yes; then
@@ -2589,12 +6676,12 @@
# or/and link against static libraries
newdependency_libs="$deplib $newdependency_libs"
fi
- if test "X$duplicate_deps" = "Xyes" ; then
+ if $opt_preserve_dup_deps ; then
case "$tmp_libs " in
- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+ *" $deplib "*) func_append specialdeplibs " $deplib" ;;
esac
fi
- tmp_libs="$tmp_libs $deplib"
+ func_append tmp_libs " $deplib"
done # for deplib
continue
fi # $linkmode = prog...
@@ -2602,15 +6689,14 @@
if test "$linkmode,$pass" = "prog,link"; then
if test -n "$library_names" &&
{ { test "$prefer_static_libs" = no ||
- test "$prefer_static_libs,$installed" = "built,yes"; } ||
+ test "$prefer_static_libs,$installed" = "built,yes"; } ||
test -z "$old_library"; }; then
# We need to hardcode the library path
if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
# Make sure the rpath contains only unique directories.
- case "$temp_rpath " in
- *" $dir "*) ;;
- *" $absdir "*) ;;
- *) temp_rpath="$temp_rpath $absdir" ;;
+ case "$temp_rpath:" in
+ *"$absdir:"*) ;;
+ *) func_append temp_rpath "$absdir:" ;;
esac
fi
@@ -2622,7 +6708,7 @@
*)
case "$compile_rpath " in
*" $absdir "*) ;;
- *) compile_rpath="$compile_rpath $absdir"
+ *) func_append compile_rpath " $absdir" ;;
esac
;;
esac
@@ -2631,7 +6717,7 @@
*)
case "$finalize_rpath " in
*" $libdir "*) ;;
- *) finalize_rpath="$finalize_rpath $libdir"
+ *) func_append finalize_rpath " $libdir" ;;
esac
;;
esac
@@ -2648,27 +6734,43 @@
link_static=no # Whether the deplib will be linked statically
use_static_libs=$prefer_static_libs
- if test "$use_static_libs" = built && test "$installed" = yes ; then
+ if test "$use_static_libs" = built && test "$installed" = yes; then
use_static_libs=no
fi
if test -n "$library_names" &&
{ test "$use_static_libs" = no || test -z "$old_library"; }; then
- if test "$installed" = no; then
- notinst_deplibs="$notinst_deplibs $lib"
- need_relink=yes
- fi
+ case $host in
+ *cygwin* | *mingw* | *cegcc*)
+ # No point in relinking DLLs because paths are not encoded
+ func_append notinst_deplibs " $lib"
+ need_relink=no
+ ;;
+ *)
+ if test "$installed" = no; then
+ func_append notinst_deplibs " $lib"
+ need_relink=yes
+ fi
+ ;;
+ esac
# This is a shared library
- # Warn about portability, can't link against -module's on
- # some systems (darwin)
- if test "$shouldnotlink" = yes && test "$pass" = link ; then
- $echo
+ # Warn about portability, can't link against -module's on some
+ # systems (darwin). Don't bleat about dlopened modules though!
+ dlopenmodule=""
+ for dlpremoduletest in $dlprefiles; do
+ if test "X$dlpremoduletest" = "X$lib"; then
+ dlopenmodule="$dlpremoduletest"
+ break
+ fi
+ done
+ if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then
+ echo
if test "$linkmode" = prog; then
- $echo "*** Warning: Linking the executable $output against the loadable module"
+ $ECHO "*** Warning: Linking the executable $output against the loadable module"
else
- $echo "*** Warning: Linking the shared library $output against the loadable module"
+ $ECHO "*** Warning: Linking the shared library $output against the loadable module"
fi
- $echo "*** $linklib is not portable!"
+ $ECHO "*** $linklib is not portable!"
fi
if test "$linkmode" = lib &&
test "$hardcode_into_libs" = yes; then
@@ -2680,7 +6782,7 @@
*)
case "$compile_rpath " in
*" $absdir "*) ;;
- *) compile_rpath="$compile_rpath $absdir"
+ *) func_append compile_rpath " $absdir" ;;
esac
;;
esac
@@ -2689,7 +6791,7 @@
*)
case "$finalize_rpath " in
*" $libdir "*) ;;
- *) finalize_rpath="$finalize_rpath $libdir"
+ *) func_append finalize_rpath " $libdir" ;;
esac
;;
esac
@@ -2698,9 +6800,10 @@
if test -n "$old_archive_from_expsyms_cmds"; then
# figure out the soname
set dummy $library_names
- realname="$2"
- shift; shift
- libname=`eval \\$echo \"$libname_spec\"`
+ shift
+ realname="$1"
+ shift
+ libname=`eval "\\$ECHO \"$libname_spec\""`
# use dlname if we got it. it's perfectly good, no?
if test -n "$dlname"; then
soname="$dlname"
@@ -2707,8 +6810,9 @@
elif test -n "$soname_spec"; then
# bleh windows
case $host in
- *cygwin* | mingw*)
- major=`expr $current - $age`
+ *cygwin* | mingw* | *cegcc*)
+ func_arith $current - $age
+ major=$func_arith_result
versuffix="-$major"
;;
esac
@@ -2719,36 +6823,22 @@
# Make a new name for the extract_expsyms_cmds to use
soroot="$soname"
- soname=`$echo $soroot | ${SED} -e 's/^.*\///'`
- newlib="libimp-`$echo $soname | ${SED} 's/^lib//;s/\.dll$//'`.a"
+ func_basename "$soroot"
+ soname="$func_basename_result"
+ func_stripname 'lib' '.dll' "$soname"
+ newlib=libimp-$func_stripname_result.a
# If the library has no export list, then create one now
if test -f "$output_objdir/$soname-def"; then :
else
- $show "extracting exported symbol list from \`$soname'"
- save_ifs="$IFS"; IFS='~'
- cmds=$extract_expsyms_cmds
- for cmd in $cmds; do
- IFS="$save_ifs"
- eval cmd=\"$cmd\"
- $show "$cmd"
- $run eval "$cmd" || exit $?
- done
- IFS="$save_ifs"
+ func_verbose "extracting exported symbol list from \`$soname'"
+ func_execute_cmds "$extract_expsyms_cmds" 'exit $?'
fi
# Create $newlib
if test -f "$output_objdir/$newlib"; then :; else
- $show "generating import library for \`$soname'"
- save_ifs="$IFS"; IFS='~'
- cmds=$old_archive_from_expsyms_cmds
- for cmd in $cmds; do
- IFS="$save_ifs"
- eval cmd=\"$cmd\"
- $show "$cmd"
- $run eval "$cmd" || exit $?
- done
- IFS="$save_ifs"
+ func_verbose "generating import library for \`$soname'"
+ func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?'
fi
# make sure the library variables are pointing to the new library
dir=$output_objdir
@@ -2755,7 +6845,7 @@
linklib=$newlib
fi # test -n "$old_archive_from_expsyms_cmds"
- if test "$linkmode" = prog || test "$mode" != relink; then
+ if test "$linkmode" = prog || test "$opt_mode" != relink; then
add_shlibpath=
add_dir=
add=
@@ -2770,17 +6860,21 @@
*-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
*-*-unixware7*) add_dir="-L$dir" ;;
*-*-darwin* )
- # if the lib is a module then we can not link against
- # it, someone is ignoring the new warnings I added
+ # if the lib is a (non-dlopened) module then we can not
+ # link against it, someone is ignoring the earlier warnings
if /usr/bin/file -L $add 2> /dev/null |
- $EGREP ": [^:]* bundle" >/dev/null ; then
- $echo "** Warning, lib $linklib is a module, not a shared library"
- if test -z "$old_library" ; then
- $echo
- $echo "** And there doesn't seem to be a static archive available"
- $echo "** The link will probably fail, sorry"
- else
- add="$dir/$old_library"
+ $GREP ": [^:]* bundle" >/dev/null ; then
+ if test "X$dlopenmodule" != "X$lib"; then
+ $ECHO "*** Warning: lib $linklib is a module, not a shared library"
+ if test -z "$old_library" ; then
+ echo
+ echo "*** And there doesn't seem to be a static archive available"
+ echo "*** The link will probably fail, sorry"
+ else
+ add="$dir/$old_library"
+ fi
+ elif test -n "$old_library"; then
+ add="$dir/$old_library"
fi
fi
esac
@@ -2798,15 +6892,16 @@
fi
;;
relink)
- if test "$hardcode_direct" = yes; then
+ if test "$hardcode_direct" = yes &&
+ test "$hardcode_direct_absolute" = no; then
add="$dir/$linklib"
elif test "$hardcode_minus_L" = yes; then
- add_dir="-L$dir"
+ add_dir="-L$absdir"
# Try looking first in the location we're being installed to.
if test -n "$inst_prefix_dir"; then
case $libdir in
[\\/]*)
- add_dir="$add_dir -L$inst_prefix_dir$libdir"
+ func_append add_dir " -L$inst_prefix_dir$libdir"
;;
esac
fi
@@ -2822,14 +6917,13 @@
esac
if test "$lib_linked" != yes; then
- $echo "$modename: configuration error: unsupported hardcode properties"
- exit $EXIT_FAILURE
+ func_fatal_configuration "unsupported hardcode properties"
fi
if test -n "$add_shlibpath"; then
case :$compile_shlibpath: in
*":$add_shlibpath:"*) ;;
- *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;;
+ *) func_append compile_shlibpath "$add_shlibpath:" ;;
esac
fi
if test "$linkmode" = prog; then
@@ -2838,23 +6932,24 @@
else
test -n "$add_dir" && deplibs="$add_dir $deplibs"
test -n "$add" && deplibs="$add $deplibs"
- if test "$hardcode_direct" != yes && \
- test "$hardcode_minus_L" != yes && \
+ if test "$hardcode_direct" != yes &&
+ test "$hardcode_minus_L" != yes &&
test "$hardcode_shlibpath_var" = yes; then
case :$finalize_shlibpath: in
*":$libdir:"*) ;;
- *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
+ *) func_append finalize_shlibpath "$libdir:" ;;
esac
fi
fi
fi
- if test "$linkmode" = prog || test "$mode" = relink; then
+ if test "$linkmode" = prog || test "$opt_mode" = relink; then
add_shlibpath=
add_dir=
add=
# Finalize command for both is simple: just hardcode it.
- if test "$hardcode_direct" = yes; then
+ if test "$hardcode_direct" = yes &&
+ test "$hardcode_direct_absolute" = no; then
add="$libdir/$linklib"
elif test "$hardcode_minus_L" = yes; then
add_dir="-L$libdir"
@@ -2862,15 +6957,15 @@
elif test "$hardcode_shlibpath_var" = yes; then
case :$finalize_shlibpath: in
*":$libdir:"*) ;;
- *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
+ *) func_append finalize_shlibpath "$libdir:" ;;
esac
add="-l$name"
elif test "$hardcode_automatic" = yes; then
if test -n "$inst_prefix_dir" &&
test -f "$inst_prefix_dir$libdir/$linklib" ; then
- add="$inst_prefix_dir$libdir/$linklib"
+ add="$inst_prefix_dir$libdir/$linklib"
else
- add="$libdir/$linklib"
+ add="$libdir/$linklib"
fi
else
# We cannot seem to hardcode it, guess we'll fake it.
@@ -2879,7 +6974,7 @@
if test -n "$inst_prefix_dir"; then
case $libdir in
[\\/]*)
- add_dir="$add_dir -L$inst_prefix_dir$libdir"
+ func_append add_dir " -L$inst_prefix_dir$libdir"
;;
esac
fi
@@ -2914,21 +7009,21 @@
# Just print a warning and add the library to dependency_libs so
# that the program can be linked against the static library.
- $echo
- $echo "*** Warning: This system can not link to static lib archive $lib."
- $echo "*** I have the capability to make that library automatically link in when"
- $echo "*** you link to this library. But I can only do this if you have a"
- $echo "*** shared version of the library, which you do not appear to have."
+ echo
+ $ECHO "*** Warning: This system can not link to static lib archive $lib."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which you do not appear to have."
if test "$module" = yes; then
- $echo "*** But as you try to build a module library, libtool will still create "
- $echo "*** a static module, that should work as long as the dlopening application"
- $echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
+ echo "*** But as you try to build a module library, libtool will still create "
+ echo "*** a static module, that should work as long as the dlopening application"
+ echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
if test -z "$global_symbol_pipe"; then
- $echo
- $echo "*** However, this would only work if libtool was able to extract symbol"
- $echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
- $echo "*** not find such a program. So, this module is probably useless."
- $echo "*** \`nm' from GNU binutils and a full rebuild may help."
+ echo
+ echo "*** However, this would only work if libtool was able to extract symbol"
+ echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+ echo "*** not find such a program. So, this module is probably useless."
+ echo "*** \`nm' from GNU binutils and a full rebuild may help."
fi
if test "$build_old_libs" = no; then
build_libtool_libs=module
@@ -2952,18 +7047,19 @@
temp_deplibs=
for libdir in $dependency_libs; do
case $libdir in
- -R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'`
+ -R*) func_stripname '-R' '' "$libdir"
+ temp_xrpath=$func_stripname_result
case " $xrpath " in
*" $temp_xrpath "*) ;;
- *) xrpath="$xrpath $temp_xrpath";;
+ *) func_append xrpath " $temp_xrpath";;
esac;;
- *) temp_deplibs="$temp_deplibs $libdir";;
+ *) func_append temp_deplibs " $libdir";;
esac
done
dependency_libs="$temp_deplibs"
fi
- newlib_search_path="$newlib_search_path $absdir"
+ func_append newlib_search_path " $absdir"
# Link against this library
test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
# ... and its dependency_libs
@@ -2970,22 +7066,31 @@
tmp_libs=
for deplib in $dependency_libs; do
newdependency_libs="$deplib $newdependency_libs"
- if test "X$duplicate_deps" = "Xyes" ; then
+ case $deplib in
+ -L*) func_stripname '-L' '' "$deplib"
+ func_resolve_sysroot "$func_stripname_result";;
+ *) func_resolve_sysroot "$deplib" ;;
+ esac
+ if $opt_preserve_dup_deps ; then
case "$tmp_libs " in
- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+ *" $func_resolve_sysroot_result "*)
+ func_append specialdeplibs " $func_resolve_sysroot_result" ;;
esac
fi
- tmp_libs="$tmp_libs $deplib"
+ func_append tmp_libs " $func_resolve_sysroot_result"
done
if test "$link_all_deplibs" != no; then
# Add the search paths of all dependency libraries
for deplib in $dependency_libs; do
+ path=
case $deplib in
-L*) path="$deplib" ;;
*.la)
- dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'`
- test "X$dir" = "X$deplib" && dir="."
+ func_resolve_sysroot "$deplib"
+ deplib=$func_resolve_sysroot_result
+ func_dirname "$deplib" "" "."
+ dir=$func_dirname_result
# We need an absolute path.
case $dir in
[\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
@@ -2992,86 +7097,63 @@
*)
absdir=`cd "$dir" && pwd`
if test -z "$absdir"; then
- $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2
+ func_warning "cannot determine absolute directory name of \`$dir'"
absdir="$dir"
fi
;;
esac
- if grep "^installed=no" $deplib > /dev/null; then
- path="$absdir/$objdir"
- else
- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
- if test -z "$libdir"; then
- $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
- exit $EXIT_FAILURE
- fi
- if test "$absdir" != "$libdir"; then
- $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2
- fi
- path="$absdir"
- fi
- depdepl=
+ if $GREP "^installed=no" $deplib > /dev/null; then
case $host in
*-*-darwin*)
- # we do not want to link against static libs,
- # but need to link against shared
+ depdepl=
eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
- eval deplibdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
if test -n "$deplibrary_names" ; then
for tmp in $deplibrary_names ; do
depdepl=$tmp
done
- if test -f "$deplibdir/$depdepl" ; then
- depdepl="$deplibdir/$depdepl"
- elif test -f "$path/$depdepl" ; then
- depdepl="$path/$depdepl"
- else
- # Can't find it, oh well...
- depdepl=
+ if test -f "$absdir/$objdir/$depdepl" ; then
+ depdepl="$absdir/$objdir/$depdepl"
+ darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
+ if test -z "$darwin_install_name"; then
+ darwin_install_name=`${OTOOL64} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
+ fi
+ func_append compiler_flags " ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}"
+ func_append linker_flags " -dylib_file ${darwin_install_name}:${depdepl}"
+ path=
fi
- # do not add paths which are already there
- case " $newlib_search_path " in
- *" $path "*) ;;
- *) newlib_search_path="$newlib_search_path $path";;
- esac
fi
- path=""
;;
*)
- path="-L$path"
+ path="-L$absdir/$objdir"
;;
esac
+ else
+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+ test -z "$libdir" && \
+ func_fatal_error "\`$deplib' is not a valid libtool archive"
+ test "$absdir" != "$libdir" && \
+ func_warning "\`$deplib' seems to be moved"
+
+ path="-L$absdir"
+ fi
;;
- -l*)
- case $host in
- *-*-darwin*)
- # Again, we only want to link against shared libraries
- eval tmp_libs=`$echo "X$deplib" | $Xsed -e "s,^\-l,,"`
- for tmp in $newlib_search_path ; do
- if test -f "$tmp/lib$tmp_libs.dylib" ; then
- eval depdepl="$tmp/lib$tmp_libs.dylib"
- break
- fi
- done
- path=""
- ;;
- *) continue ;;
- esac
- ;;
- *) continue ;;
esac
case " $deplibs " in
*" $path "*) ;;
*) deplibs="$path $deplibs" ;;
esac
- case " $deplibs " in
- *" $depdepl "*) ;;
- *) deplibs="$depdepl $deplibs" ;;
- esac
done
fi # link_all_deplibs != no
fi # linkmode = lib
done # for deplib in $libs
+ if test "$pass" = link; then
+ if test "$linkmode" = "prog"; then
+ compile_deplibs="$new_inherited_linker_flags $compile_deplibs"
+ finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs"
+ else
+ compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+ fi
+ fi
dependency_libs="$newdependency_libs"
if test "$pass" = dlpreopen; then
# Link the dlpreopened libraries before other libraries
@@ -3086,7 +7168,7 @@
for dir in $newlib_search_path; do
case "$lib_search_path " in
*" $dir "*) ;;
- *) lib_search_path="$lib_search_path $dir" ;;
+ *) func_append lib_search_path " $dir" ;;
esac
done
newlib_search_path=
@@ -3144,10 +7226,10 @@
-L*)
case " $tmp_libs " in
*" $deplib "*) ;;
- *) tmp_libs="$tmp_libs $deplib" ;;
+ *) func_append tmp_libs " $deplib" ;;
esac
;;
- *) tmp_libs="$tmp_libs $deplib" ;;
+ *) func_append tmp_libs " $deplib" ;;
esac
done
eval $var=\"$tmp_libs\"
@@ -3163,7 +7245,7 @@
;;
esac
if test -n "$i" ; then
- tmp_libs="$tmp_libs $i"
+ func_append tmp_libs " $i"
fi
done
dependency_libs=$tmp_libs
@@ -3170,44 +7252,41 @@
done # for pass
if test "$linkmode" = prog; then
dlfiles="$newdlfiles"
+ fi
+ if test "$linkmode" = prog || test "$linkmode" = lib; then
dlprefiles="$newdlprefiles"
fi
case $linkmode in
oldlib)
+ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+ func_warning "\`-dlopen' is ignored for archives"
+ fi
+
case " $deplibs" in
*\ -l* | *\ -L*)
- $echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2 ;;
+ func_warning "\`-l' and \`-L' are ignored for archives" ;;
esac
- if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
- $echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2
- fi
+ test -n "$rpath" && \
+ func_warning "\`-rpath' is ignored for archives"
- if test -n "$rpath"; then
- $echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2
- fi
+ test -n "$xrpath" && \
+ func_warning "\`-R' is ignored for archives"
- if test -n "$xrpath"; then
- $echo "$modename: warning: \`-R' is ignored for archives" 1>&2
- fi
+ test -n "$vinfo" && \
+ func_warning "\`-version-info/-version-number' is ignored for archives"
- if test -n "$vinfo"; then
- $echo "$modename: warning: \`-version-info/-version-number' is ignored for archives" 1>&2
- fi
+ test -n "$release" && \
+ func_warning "\`-release' is ignored for archives"
- if test -n "$release"; then
- $echo "$modename: warning: \`-release' is ignored for archives" 1>&2
- fi
+ test -n "$export_symbols$export_symbols_regex" && \
+ func_warning "\`-export-symbols' is ignored for archives"
- if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
- $echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2
- fi
-
# Now set the variables for building old libraries.
build_libtool_libs=no
oldlibs="$output"
- objs="$objs$old_deplibs"
+ func_append objs "$old_deplibs"
;;
lib)
@@ -3214,23 +7293,24 @@
# Make sure we only generate libraries of the form `libNAME.la'.
case $outputname in
lib*)
- name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
+ func_stripname 'lib' '.la' "$outputname"
+ name=$func_stripname_result
eval shared_ext=\"$shrext_cmds\"
eval libname=\"$libname_spec\"
;;
*)
- if test "$module" = no; then
- $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
+ test "$module" = no && \
+ func_fatal_help "libtool library \`$output' must begin with \`lib'"
+
if test "$need_lib_prefix" != no; then
# Add the "lib" prefix for modules if required
- name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
+ func_stripname '' '.la' "$outputname"
+ name=$func_stripname_result
eval shared_ext=\"$shrext_cmds\"
eval libname=\"$libname_spec\"
else
- libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
+ func_stripname '' '.la' "$outputname"
+ libname=$func_stripname_result
fi
;;
esac
@@ -3237,26 +7317,25 @@
if test -n "$objs"; then
if test "$deplibs_check_method" != pass_all; then
- $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1
- exit $EXIT_FAILURE
+ func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs"
else
- $echo
- $echo "*** Warning: Linking the shared library $output against the non-libtool"
- $echo "*** objects $objs is not portable!"
- libobjs="$libobjs $objs"
+ echo
+ $ECHO "*** Warning: Linking the shared library $output against the non-libtool"
+ $ECHO "*** objects $objs is not portable!"
+ func_append libobjs " $objs"
fi
fi
- if test "$dlself" != no; then
- $echo "$modename: warning: \`-dlopen self' is ignored for libtool libraries" 1>&2
- fi
+ test "$dlself" != no && \
+ func_warning "\`-dlopen self' is ignored for libtool libraries"
set dummy $rpath
- if test "$#" -gt 2; then
- $echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2
- fi
- install_libdir="$2"
+ shift
+ test "$#" -gt 1 && \
+ func_warning "ignoring multiple \`-rpath's for a libtool library"
+ install_libdir="$1"
+
oldlibs=
if test -z "$rpath"; then
if test "$build_libtool_libs" = yes; then
@@ -3269,25 +7348,21 @@
build_old_libs=yes
fi
- if test -n "$vinfo"; then
- $echo "$modename: warning: \`-version-info/-version-number' is ignored for convenience libraries" 1>&2
- fi
+ test -n "$vinfo" && \
+ func_warning "\`-version-info/-version-number' is ignored for convenience libraries"
- if test -n "$release"; then
- $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2
- fi
+ test -n "$release" && \
+ func_warning "\`-release' is ignored for convenience libraries"
else
# Parse the version information argument.
save_ifs="$IFS"; IFS=':'
set dummy $vinfo 0 0 0
+ shift
IFS="$save_ifs"
- if test -n "$8"; then
- $echo "$modename: too many parameters to \`-version-info'" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
+ test -n "$7" && \
+ func_fatal_help "too many parameters to \`-version-info'"
# convert absolute version numbers to libtool ages
# this retains compatibility with .la files and attempts
@@ -3295,9 +7370,9 @@
case $vinfo_number in
yes)
- number_major="$2"
- number_minor="$3"
- number_revision="$4"
+ number_major="$1"
+ number_minor="$2"
+ number_revision="$3"
#
# There are really only two kinds -- those that
# use the current revision as the major version
@@ -3306,18 +7381,21 @@
# which has an extra 1 added just for fun
#
case $version_type in
+ # correct linux to gnu/linux during the next big refactor
darwin|linux|osf|windows|none)
- current=`expr $number_major + $number_minor`
+ func_arith $number_major + $number_minor
+ current=$func_arith_result
age="$number_minor"
revision="$number_revision"
;;
- freebsd-aout|freebsd-elf|sunos)
+ freebsd-aout|freebsd-elf|qnx|sunos)
current="$number_major"
revision="$number_minor"
age="0"
;;
irix|nonstopux)
- current=`expr $number_major + $number_minor`
+ func_arith $number_major + $number_minor
+ current=$func_arith_result
age="$number_minor"
revision="$number_minor"
lt_irix_increment=no
@@ -3325,9 +7403,9 @@
esac
;;
no)
- current="$2"
- revision="$3"
- age="$4"
+ current="$1"
+ revision="$2"
+ age="$3"
;;
esac
@@ -3335,9 +7413,8 @@
case $current in
0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
*)
- $echo "$modename: CURRENT \`$current' must be a nonnegative integer" 1>&2
- $echo "$modename: \`$vinfo' is not valid version information" 1>&2
- exit $EXIT_FAILURE
+ func_error "CURRENT \`$current' must be a nonnegative integer"
+ func_fatal_error "\`$vinfo' is not valid version information"
;;
esac
@@ -3344,9 +7421,8 @@
case $revision in
0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
*)
- $echo "$modename: REVISION \`$revision' must be a nonnegative integer" 1>&2
- $echo "$modename: \`$vinfo' is not valid version information" 1>&2
- exit $EXIT_FAILURE
+ func_error "REVISION \`$revision' must be a nonnegative integer"
+ func_fatal_error "\`$vinfo' is not valid version information"
;;
esac
@@ -3353,16 +7429,14 @@
case $age in
0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
*)
- $echo "$modename: AGE \`$age' must be a nonnegative integer" 1>&2
- $echo "$modename: \`$vinfo' is not valid version information" 1>&2
- exit $EXIT_FAILURE
+ func_error "AGE \`$age' must be a nonnegative integer"
+ func_fatal_error "\`$vinfo' is not valid version information"
;;
esac
if test "$age" -gt "$current"; then
- $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2
- $echo "$modename: \`$vinfo' is not valid version information" 1>&2
- exit $EXIT_FAILURE
+ func_error "AGE \`$age' is greater than the current interface number \`$current'"
+ func_fatal_error "\`$vinfo' is not valid version information"
fi
# Calculate the version variables.
@@ -3375,10 +7449,12 @@
darwin)
# Like Linux, but with the current version available in
# verstring for coding it into the library header
- major=.`expr $current - $age`
+ func_arith $current - $age
+ major=.$func_arith_result
versuffix="$major.$age.$revision"
# Darwin ld doesn't like 0 for these options...
- minor_current=`expr $current + 1`
+ func_arith $current + 1
+ minor_current=$func_arith_result
xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
;;
@@ -3390,15 +7466,17 @@
freebsd-elf)
major=".$current"
- versuffix=".$current";
+ versuffix=".$current"
;;
irix | nonstopux)
if test "X$lt_irix_increment" = "Xno"; then
- major=`expr $current - $age`
+ func_arith $current - $age
else
- major=`expr $current - $age + 1`
+ func_arith $current - $age + 1
fi
+ major=$func_arith_result
+
case $version_type in
nonstopux) verstring_prefix=nonstopux ;;
*) verstring_prefix=sgi ;;
@@ -3408,8 +7486,10 @@
# Add in all the interfaces that we are compatible with.
loop=$revision
while test "$loop" -ne 0; do
- iface=`expr $revision - $loop`
- loop=`expr $loop - 1`
+ func_arith $revision - $loop
+ iface=$func_arith_result
+ func_arith $loop - 1
+ loop=$func_arith_result
verstring="$verstring_prefix$major.$iface:$verstring"
done
@@ -3418,13 +7498,15 @@
versuffix="$major.$revision"
;;
- linux)
- major=.`expr $current - $age`
+ linux) # correct to gnu/linux during the next big refactor
+ func_arith $current - $age
+ major=.$func_arith_result
versuffix="$major.$age.$revision"
;;
osf)
- major=.`expr $current - $age`
+ func_arith $current - $age
+ major=.$func_arith_result
versuffix=".$current.$age.$revision"
verstring="$current.$age.$revision"
@@ -3431,15 +7513,22 @@
# Add in all the interfaces that we are compatible with.
loop=$age
while test "$loop" -ne 0; do
- iface=`expr $current - $loop`
- loop=`expr $loop - 1`
+ func_arith $current - $loop
+ iface=$func_arith_result
+ func_arith $loop - 1
+ loop=$func_arith_result
verstring="$verstring:${iface}.0"
done
# Make executables depend on our current version.
- verstring="$verstring:${current}.0"
+ func_append verstring ":${current}.0"
;;
+ qnx)
+ major=".$current"
+ versuffix=".$current"
+ ;;
+
sunos)
major=".$current"
versuffix=".$current.$revision"
@@ -3448,14 +7537,13 @@
windows)
# Use '-' rather than '.', since we only want one
# extension on DOS 8.3 filesystems.
- major=`expr $current - $age`
+ func_arith $current - $age
+ major=$func_arith_result
versuffix="-$major"
;;
*)
- $echo "$modename: unknown library version type \`$version_type'" 1>&2
- $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
- exit $EXIT_FAILURE
+ func_fatal_configuration "unknown library version type \`$version_type'"
;;
esac
@@ -3489,7 +7577,7 @@
# Check to see if the archive will have undefined symbols.
if test "$allow_undefined" = yes; then
if test "$allow_undefined_flag" = unsupported; then
- $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2
+ func_warning "undefined symbols not allowed in $host shared libraries"
build_libtool_libs=no
build_old_libs=yes
fi
@@ -3497,48 +7585,51 @@
# Don't allow undefined symbols.
allow_undefined_flag="$no_undefined_flag"
fi
+
fi
- if test "$mode" != relink; then
+ func_generate_dlsyms "$libname" "$libname" "yes"
+ func_append libobjs " $symfileobj"
+ test "X$libobjs" = "X " && libobjs=
+
+ if test "$opt_mode" != relink; then
# Remove our outputs, but don't remove object files since they
# may have been created when compiling PIC objects.
removelist=
- tempremovelist=`$echo "$output_objdir/*"`
+ tempremovelist=`$ECHO "$output_objdir/*"`
for p in $tempremovelist; do
case $p in
- *.$objext)
+ *.$objext | *.gcno)
;;
$output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
if test "X$precious_files_regex" != "X"; then
- if echo $p | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
- then
+ if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
+ then
continue
fi
fi
- removelist="$removelist $p"
+ func_append removelist " $p"
;;
*) ;;
esac
done
- if test -n "$removelist"; then
- $show "${rm}r $removelist"
- $run ${rm}r $removelist
- fi
+ test -n "$removelist" && \
+ func_show_eval "${RM}r \$removelist"
fi
# Now set the variables for building old libraries.
if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
- oldlibs="$oldlibs $output_objdir/$libname.$libext"
+ func_append oldlibs " $output_objdir/$libname.$libext"
# Transform .lo files to .o files.
- oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
+ oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; $lo2o" | $NL2SP`
fi
# Eliminate all temporary directories.
#for path in $notinst_path; do
- # lib_search_path=`$echo "$lib_search_path " | ${SED} -e "s% $path % %g"`
- # deplibs=`$echo "$deplibs " | ${SED} -e "s% -L$path % %g"`
- # dependency_libs=`$echo "$dependency_libs " | ${SED} -e "s% -L$path % %g"`
+ # lib_search_path=`$ECHO "$lib_search_path " | $SED "s% $path % %g"`
+ # deplibs=`$ECHO "$deplibs " | $SED "s% -L$path % %g"`
+ # dependency_libs=`$ECHO "$dependency_libs " | $SED "s% -L$path % %g"`
#done
if test -n "$xrpath"; then
@@ -3545,10 +7636,11 @@
# If the user specified any rpath flags, then add them.
temp_xrpath=
for libdir in $xrpath; do
- temp_xrpath="$temp_xrpath -R$libdir"
+ func_replace_sysroot "$libdir"
+ func_append temp_xrpath " -R$func_replace_sysroot_result"
case "$finalize_rpath " in
*" $libdir "*) ;;
- *) finalize_rpath="$finalize_rpath $libdir" ;;
+ *) func_append finalize_rpath " $libdir" ;;
esac
done
if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
@@ -3562,7 +7654,7 @@
for lib in $old_dlfiles; do
case " $dlprefiles $dlfiles " in
*" $lib "*) ;;
- *) dlfiles="$dlfiles $lib" ;;
+ *) func_append dlfiles " $lib" ;;
esac
done
@@ -3572,7 +7664,7 @@
for lib in $old_dlprefiles; do
case "$dlprefiles " in
*" $lib "*) ;;
- *) dlprefiles="$dlprefiles $lib" ;;
+ *) func_append dlprefiles " $lib" ;;
esac
done
@@ -3579,12 +7671,12 @@
if test "$build_libtool_libs" = yes; then
if test -n "$rpath"; then
case $host in
- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*)
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*)
# these systems don't actually have a c library (as such)!
;;
*-*-rhapsody* | *-*-darwin1.[012])
# Rhapsody C library is in the System framework
- deplibs="$deplibs -framework System"
+ func_append deplibs " System.ltframework"
;;
*-*-netbsd*)
# Don't link with libc until the a.out ld.so is fixed.
@@ -3598,10 +7690,10 @@
*-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
# Compiler inserts libc in the correct place for threads to work
;;
- *)
+ *)
# Add libc to deplibs on all other systems if necessary.
if test "$build_libtool_need_lc" = "yes"; then
- deplibs="$deplibs -lc"
+ func_append deplibs " -lc"
fi
;;
esac
@@ -3635,120 +7727,139 @@
# limits. Maybe even breaks it. We compile a program, linking it
# against the deplibs as a proxy for the library. Then we can check
# whether they linked in statically or dynamically with ldd.
- $rm conftest.c
+ $opt_dry_run || $RM conftest.c
cat > conftest.c <<EOF
int main() { return 0; }
EOF
- $rm conftest
+ $opt_dry_run || $RM conftest
if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then
ldd_output=`ldd conftest`
for i in $deplibs; do
- name=`expr $i : '-l\(.*\)'`
- # If $name is empty we are operating on a -L argument.
- if test "$name" != "" && test "$name" != "0"; then
+ case $i in
+ -l*)
+ func_stripname -l '' "$i"
+ name=$func_stripname_result
if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
case " $predeps $postdeps " in
*" $i "*)
- newdeplibs="$newdeplibs $i"
+ func_append newdeplibs " $i"
i=""
;;
esac
- fi
+ fi
if test -n "$i" ; then
- libname=`eval \\$echo \"$libname_spec\"`
- deplib_matches=`eval \\$echo \"$library_names_spec\"`
- set dummy $deplib_matches
- deplib_match=$2
+ libname=`eval "\\$ECHO \"$libname_spec\""`
+ deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
+ set dummy $deplib_matches; shift
+ deplib_match=$1
if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
- newdeplibs="$newdeplibs $i"
+ func_append newdeplibs " $i"
else
droppeddeps=yes
- $echo
- $echo "*** Warning: dynamic linker does not accept needed library $i."
- $echo "*** I have the capability to make that library automatically link in when"
- $echo "*** you link to this library. But I can only do this if you have a"
- $echo "*** shared version of the library, which I believe you do not have"
- $echo "*** because a test_compile did reveal that the linker did not use it for"
- $echo "*** its dynamic dependency list that programs get resolved with at runtime."
+ echo
+ $ECHO "*** Warning: dynamic linker does not accept needed library $i."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which I believe you do not have"
+ echo "*** because a test_compile did reveal that the linker did not use it for"
+ echo "*** its dynamic dependency list that programs get resolved with at runtime."
fi
fi
- else
- newdeplibs="$newdeplibs $i"
- fi
+ ;;
+ *)
+ func_append newdeplibs " $i"
+ ;;
+ esac
done
else
# Error occurred in the first compile. Let's try to salvage
# the situation: Compile a separate program for each library.
for i in $deplibs; do
- name=`expr $i : '-l\(.*\)'`
- # If $name is empty we are operating on a -L argument.
- if test "$name" != "" && test "$name" != "0"; then
- $rm conftest
+ case $i in
+ -l*)
+ func_stripname -l '' "$i"
+ name=$func_stripname_result
+ $opt_dry_run || $RM conftest
if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
ldd_output=`ldd conftest`
if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
case " $predeps $postdeps " in
*" $i "*)
- newdeplibs="$newdeplibs $i"
+ func_append newdeplibs " $i"
i=""
;;
esac
fi
if test -n "$i" ; then
- libname=`eval \\$echo \"$libname_spec\"`
- deplib_matches=`eval \\$echo \"$library_names_spec\"`
- set dummy $deplib_matches
- deplib_match=$2
+ libname=`eval "\\$ECHO \"$libname_spec\""`
+ deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
+ set dummy $deplib_matches; shift
+ deplib_match=$1
if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
- newdeplibs="$newdeplibs $i"
+ func_append newdeplibs " $i"
else
droppeddeps=yes
- $echo
- $echo "*** Warning: dynamic linker does not accept needed library $i."
- $echo "*** I have the capability to make that library automatically link in when"
- $echo "*** you link to this library. But I can only do this if you have a"
- $echo "*** shared version of the library, which you do not appear to have"
- $echo "*** because a test_compile did reveal that the linker did not use this one"
- $echo "*** as a dynamic dependency that programs can get resolved with at runtime."
+ echo
+ $ECHO "*** Warning: dynamic linker does not accept needed library $i."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which you do not appear to have"
+ echo "*** because a test_compile did reveal that the linker did not use this one"
+ echo "*** as a dynamic dependency that programs can get resolved with at runtime."
fi
fi
else
droppeddeps=yes
- $echo
- $echo "*** Warning! Library $i is needed by this library but I was not able to"
- $echo "*** make it link in! You will probably need to install it or some"
- $echo "*** library that it depends on before this library will be fully"
- $echo "*** functional. Installing it before continuing would be even better."
+ echo
+ $ECHO "*** Warning! Library $i is needed by this library but I was not able to"
+ echo "*** make it link in! You will probably need to install it or some"
+ echo "*** library that it depends on before this library will be fully"
+ echo "*** functional. Installing it before continuing would be even better."
fi
- else
- newdeplibs="$newdeplibs $i"
- fi
+ ;;
+ *)
+ func_append newdeplibs " $i"
+ ;;
+ esac
done
fi
;;
file_magic*)
- set dummy $deplibs_check_method
- file_magic_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
+ set dummy $deplibs_check_method; shift
+ file_magic_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
for a_deplib in $deplibs; do
- name=`expr $a_deplib : '-l\(.*\)'`
- # If $name is empty we are operating on a -L argument.
- if test "$name" != "" && test "$name" != "0"; then
+ case $a_deplib in
+ -l*)
+ func_stripname -l '' "$a_deplib"
+ name=$func_stripname_result
if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
case " $predeps $postdeps " in
*" $a_deplib "*)
- newdeplibs="$newdeplibs $a_deplib"
+ func_append newdeplibs " $a_deplib"
a_deplib=""
;;
esac
fi
if test -n "$a_deplib" ; then
- libname=`eval \\$echo \"$libname_spec\"`
+ libname=`eval "\\$ECHO \"$libname_spec\""`
+ if test -n "$file_magic_glob"; then
+ libnameglob=`func_echo_all "$libname" | $SED -e $file_magic_glob`
+ else
+ libnameglob=$libname
+ fi
+ test "$want_nocaseglob" = yes && nocaseglob=`shopt -p nocaseglob`
for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
- potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
+ if test "$want_nocaseglob" = yes; then
+ shopt -s nocaseglob
+ potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
+ $nocaseglob
+ else
+ potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
+ fi
for potent_lib in $potential_libs; do
# Follow soft links.
- if ls -lLd "$potent_lib" 2>/dev/null \
- | grep " -> " >/dev/null; then
+ if ls -lLd "$potent_lib" 2>/dev/null |
+ $GREP " -> " >/dev/null; then
continue
fi
# The statement above tries to avoid entering an
@@ -3761,13 +7872,13 @@
potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
case $potliblink in
[\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
- *) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
+ *) potlib=`$ECHO "$potlib" | $SED 's,[^/]*$,,'`"$potliblink";;
esac
done
- if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \
- | ${SED} 10q \
- | $EGREP "$file_magic_regex" > /dev/null; then
- newdeplibs="$newdeplibs $a_deplib"
+ if eval $file_magic_cmd \"\$potlib\" 2>/dev/null |
+ $SED -e 10q |
+ $EGREP "$file_magic_regex" > /dev/null; then
+ func_append newdeplibs " $a_deplib"
a_deplib=""
break 2
fi
@@ -3776,50 +7887,52 @@
fi
if test -n "$a_deplib" ; then
droppeddeps=yes
- $echo
- $echo "*** Warning: linker path does not have real file for library $a_deplib."
- $echo "*** I have the capability to make that library automatically link in when"
- $echo "*** you link to this library. But I can only do this if you have a"
- $echo "*** shared version of the library, which you do not appear to have"
- $echo "*** because I did check the linker path looking for a file starting"
+ echo
+ $ECHO "*** Warning: linker path does not have real file for library $a_deplib."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which you do not appear to have"
+ echo "*** because I did check the linker path looking for a file starting"
if test -z "$potlib" ; then
- $echo "*** with $libname but no candidates were found. (...for file magic test)"
+ $ECHO "*** with $libname but no candidates were found. (...for file magic test)"
else
- $echo "*** with $libname and none of the candidates passed a file format test"
- $echo "*** using a file magic. Last file checked: $potlib"
+ $ECHO "*** with $libname and none of the candidates passed a file format test"
+ $ECHO "*** using a file magic. Last file checked: $potlib"
fi
fi
- else
+ ;;
+ *)
# Add a -L argument.
- newdeplibs="$newdeplibs $a_deplib"
- fi
+ func_append newdeplibs " $a_deplib"
+ ;;
+ esac
done # Gone through all deplibs.
;;
match_pattern*)
- set dummy $deplibs_check_method
- match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
+ set dummy $deplibs_check_method; shift
+ match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
for a_deplib in $deplibs; do
- name=`expr $a_deplib : '-l\(.*\)'`
- # If $name is empty we are operating on a -L argument.
- if test -n "$name" && test "$name" != "0"; then
+ case $a_deplib in
+ -l*)
+ func_stripname -l '' "$a_deplib"
+ name=$func_stripname_result
if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
case " $predeps $postdeps " in
*" $a_deplib "*)
- newdeplibs="$newdeplibs $a_deplib"
+ func_append newdeplibs " $a_deplib"
a_deplib=""
;;
esac
fi
if test -n "$a_deplib" ; then
- libname=`eval \\$echo \"$libname_spec\"`
+ libname=`eval "\\$ECHO \"$libname_spec\""`
for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
for potent_lib in $potential_libs; do
potlib="$potent_lib" # see symlink-check above in file_magic test
- if eval $echo \"$potent_lib\" 2>/dev/null \
- | ${SED} 10q \
- | $EGREP "$match_pattern_regex" > /dev/null; then
- newdeplibs="$newdeplibs $a_deplib"
+ if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \
+ $EGREP "$match_pattern_regex" > /dev/null; then
+ func_append newdeplibs " $a_deplib"
a_deplib=""
break 2
fi
@@ -3828,46 +7941,48 @@
fi
if test -n "$a_deplib" ; then
droppeddeps=yes
- $echo
- $echo "*** Warning: linker path does not have real file for library $a_deplib."
- $echo "*** I have the capability to make that library automatically link in when"
- $echo "*** you link to this library. But I can only do this if you have a"
- $echo "*** shared version of the library, which you do not appear to have"
- $echo "*** because I did check the linker path looking for a file starting"
+ echo
+ $ECHO "*** Warning: linker path does not have real file for library $a_deplib."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which you do not appear to have"
+ echo "*** because I did check the linker path looking for a file starting"
if test -z "$potlib" ; then
- $echo "*** with $libname but no candidates were found. (...for regex pattern test)"
+ $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)"
else
- $echo "*** with $libname and none of the candidates passed a file format test"
- $echo "*** using a regex pattern. Last file checked: $potlib"
+ $ECHO "*** with $libname and none of the candidates passed a file format test"
+ $ECHO "*** using a regex pattern. Last file checked: $potlib"
fi
fi
- else
+ ;;
+ *)
# Add a -L argument.
- newdeplibs="$newdeplibs $a_deplib"
- fi
+ func_append newdeplibs " $a_deplib"
+ ;;
+ esac
done # Gone through all deplibs.
;;
none | unknown | *)
newdeplibs=""
- tmp_deplibs=`$echo "X $deplibs" | $Xsed -e 's/ -lc$//' \
- -e 's/ -[LR][^ ]*//g'`
+ tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'`
if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
for i in $predeps $postdeps ; do
# can't use Xsed below, because $i might contain '/'
- tmp_deplibs=`$echo "X $tmp_deplibs" | ${SED} -e "1s,^X,," -e "s,$i,,"`
+ tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s,$i,,"`
done
fi
- if $echo "X $tmp_deplibs" | $Xsed -e 's/[ ]//g' \
- | grep . >/dev/null; then
- $echo
+ case $tmp_deplibs in
+ *[!\ \ ]*)
+ echo
if test "X$deplibs_check_method" = "Xnone"; then
- $echo "*** Warning: inter-library dependencies are not supported in this platform."
+ echo "*** Warning: inter-library dependencies are not supported in this platform."
else
- $echo "*** Warning: inter-library dependencies are not known to be supported."
+ echo "*** Warning: inter-library dependencies are not known to be supported."
fi
- $echo "*** All declared inter-library dependencies are being dropped."
+ echo "*** All declared inter-library dependencies are being dropped."
droppeddeps=yes
- fi
+ ;;
+ esac
;;
esac
versuffix=$versuffix_save
@@ -3878,24 +7993,24 @@
case $host in
*-*-rhapsody* | *-*-darwin1.[012])
- # On Rhapsody replace the C library is the System framework
- newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's/ -lc / -framework System /'`
+ # On Rhapsody replace the C library with the System framework
+ newdeplibs=`$ECHO " $newdeplibs" | $SED 's/ -lc / System.ltframework /'`
;;
esac
if test "$droppeddeps" = yes; then
if test "$module" = yes; then
- $echo
- $echo "*** Warning: libtool could not satisfy all declared inter-library"
- $echo "*** dependencies of module $libname. Therefore, libtool will create"
- $echo "*** a static module, that should work as long as the dlopening"
- $echo "*** application is linked with the -dlopen flag."
+ echo
+ echo "*** Warning: libtool could not satisfy all declared inter-library"
+ $ECHO "*** dependencies of module $libname. Therefore, libtool will create"
+ echo "*** a static module, that should work as long as the dlopening"
+ echo "*** application is linked with the -dlopen flag."
if test -z "$global_symbol_pipe"; then
- $echo
- $echo "*** However, this would only work if libtool was able to extract symbol"
- $echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
- $echo "*** not find such a program. So, this module is probably useless."
- $echo "*** \`nm' from GNU binutils and a full rebuild may help."
+ echo
+ echo "*** However, this would only work if libtool was able to extract symbol"
+ echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+ echo "*** not find such a program. So, this module is probably useless."
+ echo "*** \`nm' from GNU binutils and a full rebuild may help."
fi
if test "$build_old_libs" = no; then
oldlibs="$output_objdir/$libname.$libext"
@@ -3905,16 +8020,16 @@
build_libtool_libs=no
fi
else
- $echo "*** The inter-library dependencies that have been dropped here will be"
- $echo "*** automatically added whenever a program is linked with this library"
- $echo "*** or is declared to -dlopen it."
+ echo "*** The inter-library dependencies that have been dropped here will be"
+ echo "*** automatically added whenever a program is linked with this library"
+ echo "*** or is declared to -dlopen it."
if test "$allow_undefined" = no; then
- $echo
- $echo "*** Since this library must not contain undefined symbols,"
- $echo "*** because either the platform does not support them or"
- $echo "*** it was explicitly requested with -no-undefined,"
- $echo "*** libtool will only create a static version of it."
+ echo
+ echo "*** Since this library must not contain undefined symbols,"
+ echo "*** because either the platform does not support them or"
+ echo "*** it was explicitly requested with -no-undefined,"
+ echo "*** libtool will only create a static version of it."
if test "$build_old_libs" = no; then
oldlibs="$output_objdir/$libname.$libext"
build_libtool_libs=module
@@ -3928,8 +8043,15 @@
# Done checking deplibs!
deplibs=$newdeplibs
fi
+ # Time to change all our "foo.ltframework" stuff back to "-framework foo"
+ case $host in
+ *-*-darwin*)
+ newdeplibs=`$ECHO " $newdeplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+ new_inherited_linker_flags=`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+ deplibs=`$ECHO " $deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+ ;;
+ esac
-
# move library search paths that coincide with paths to not yet
# installed libraries to the beginning of the library search list
new_libs=
@@ -3939,7 +8061,7 @@
*)
case " $deplibs " in
*" -L$path/$objdir "*)
- new_libs="$new_libs -L$path/$objdir" ;;
+ func_append new_libs " -L$path/$objdir" ;;
esac
;;
esac
@@ -3949,15 +8071,14 @@
-L*)
case " $new_libs " in
*" $deplib "*) ;;
- *) new_libs="$new_libs $deplib" ;;
+ *) func_append new_libs " $deplib" ;;
esac
;;
- *) new_libs="$new_libs $deplib" ;;
+ *) func_append new_libs " $deplib" ;;
esac
done
deplibs="$new_libs"
-
# All the library-specific variables (install_libdir is set above).
library_names=
old_library=
@@ -3965,15 +8086,22 @@
# Test again, we may have decided not to build it any more
if test "$build_libtool_libs" = yes; then
+ # Remove ${wl} instances when linking with ld.
+ # FIXME: should test the right _cmds variable.
+ case $archive_cmds in
+ *\$LD\ *) wl= ;;
+ esac
if test "$hardcode_into_libs" = yes; then
# Hardcode the library paths
hardcode_libdirs=
dep_rpath=
rpath="$finalize_rpath"
- test "$mode" != relink && rpath="$compile_rpath$rpath"
+ test "$opt_mode" != relink && rpath="$compile_rpath$rpath"
for libdir in $rpath; do
if test -n "$hardcode_libdir_flag_spec"; then
if test -n "$hardcode_libdir_separator"; then
+ func_replace_sysroot "$libdir"
+ libdir=$func_replace_sysroot_result
if test -z "$hardcode_libdirs"; then
hardcode_libdirs="$libdir"
else
@@ -3982,18 +8110,18 @@
*"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
;;
*)
- hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+ func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
;;
esac
fi
else
eval flag=\"$hardcode_libdir_flag_spec\"
- dep_rpath="$dep_rpath $flag"
+ func_append dep_rpath " $flag"
fi
elif test -n "$runpath_var"; then
case "$perm_rpath " in
*" $libdir "*) ;;
- *) perm_rpath="$perm_rpath $libdir" ;;
+ *) func_append perm_rpath " $libdir" ;;
esac
fi
done
@@ -4001,20 +8129,13 @@
if test -n "$hardcode_libdir_separator" &&
test -n "$hardcode_libdirs"; then
libdir="$hardcode_libdirs"
- if test -n "$hardcode_libdir_flag_spec_ld"; then
- case $archive_cmds in
- *\$LD*) eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\" ;;
- *) eval dep_rpath=\"$hardcode_libdir_flag_spec\" ;;
- esac
- else
- eval dep_rpath=\"$hardcode_libdir_flag_spec\"
- fi
+ eval "dep_rpath=\"$hardcode_libdir_flag_spec\""
fi
if test -n "$runpath_var" && test -n "$perm_rpath"; then
# We should set the runpath_var.
rpath=
for dir in $perm_rpath; do
- rpath="$rpath$dir:"
+ func_append rpath "$dir:"
done
eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
fi
@@ -4022,7 +8143,7 @@
fi
shlibpath="$finalize_shlibpath"
- test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
+ test "$opt_mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
if test -n "$shlibpath"; then
eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
fi
@@ -4031,8 +8152,9 @@
eval shared_ext=\"$shrext_cmds\"
eval library_names=\"$library_names_spec\"
set dummy $library_names
- realname="$2"
- shift; shift
+ shift
+ realname="$1"
+ shift
if test -n "$soname_spec"; then
eval soname=\"$soname_spec\"
@@ -4047,32 +8169,92 @@
linknames=
for link
do
- linknames="$linknames $link"
+ func_append linknames " $link"
done
# Use standard objects if they are pic
- test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+ test -z "$pic_flag" && libobjs=`$ECHO "$libobjs" | $SP2NL | $SED "$lo2o" | $NL2SP`
+ test "X$libobjs" = "X " && libobjs=
+ delfiles=
+ if test -n "$export_symbols" && test -n "$include_expsyms"; then
+ $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp"
+ export_symbols="$output_objdir/$libname.uexp"
+ func_append delfiles " $export_symbols"
+ fi
+
+ orig_export_symbols=
+ case $host_os in
+ cygwin* | mingw* | cegcc*)
+ if test -n "$export_symbols" && test -z "$export_symbols_regex"; then
+ # exporting using user supplied symfile
+ if test "x`$SED 1q $export_symbols`" != xEXPORTS; then
+ # and it's NOT already a .def file. Must figure out
+ # which of the given symbols are data symbols and tag
+ # them as such. So, trigger use of export_symbols_cmds.
+ # export_symbols gets reassigned inside the "prepare
+ # the list of exported symbols" if statement, so the
+ # include_expsyms logic still works.
+ orig_export_symbols="$export_symbols"
+ export_symbols=
+ always_export_symbols=yes
+ fi
+ fi
+ ;;
+ esac
+
# Prepare the list of exported symbols
if test -z "$export_symbols"; then
if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
- $show "generating symbol list for \`$libname.la'"
+ func_verbose "generating symbol list for \`$libname.la'"
export_symbols="$output_objdir/$libname.exp"
- $run $rm $export_symbols
+ $opt_dry_run || $RM $export_symbols
cmds=$export_symbols_cmds
save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
+ for cmd1 in $cmds; do
IFS="$save_ifs"
- eval cmd=\"$cmd\"
- if len=`expr "X$cmd" : ".*"` &&
- test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
- $show "$cmd"
- $run eval "$cmd" || exit $?
- skipped_export=false
+ # Take the normal branch if the nm_file_list_spec branch
+ # doesn't work or if tool conversion is not needed.
+ case $nm_file_list_spec~$to_tool_file_cmd in
+ *~func_convert_file_noop | *~func_convert_file_msys_to_w32 | ~*)
+ try_normal_branch=yes
+ eval cmd=\"$cmd1\"
+ func_len " $cmd"
+ len=$func_len_result
+ ;;
+ *)
+ try_normal_branch=no
+ ;;
+ esac
+ if test "$try_normal_branch" = yes \
+ && { test "$len" -lt "$max_cmd_len" \
+ || test "$max_cmd_len" -le -1; }
+ then
+ func_show_eval "$cmd" 'exit $?'
+ skipped_export=false
+ elif test -n "$nm_file_list_spec"; then
+ func_basename "$output"
+ output_la=$func_basename_result
+ save_libobjs=$libobjs
+ save_output=$output
+ output=${output_objdir}/${output_la}.nm
+ func_to_tool_file "$output"
+ libobjs=$nm_file_list_spec$func_to_tool_file_result
+ func_append delfiles " $output"
+ func_verbose "creating $NM input file list: $output"
+ for obj in $save_libobjs; do
+ func_to_tool_file "$obj"
+ $ECHO "$func_to_tool_file_result"
+ done > "$output"
+ eval cmd=\"$cmd1\"
+ func_show_eval "$cmd" 'exit $?'
+ output=$save_output
+ libobjs=$save_libobjs
+ skipped_export=false
else
- # The command line is too long to execute in one step.
- $show "using reloadable object file for export list..."
- skipped_export=:
+ # The command line is too long to execute in one step.
+ func_verbose "using reloadable object file for export list..."
+ skipped_export=:
# Break out early, otherwise skipped_export may be
# set to false by a later but shorter cmd.
break
@@ -4079,51 +8261,74 @@
fi
done
IFS="$save_ifs"
- if test -n "$export_symbols_regex"; then
- $show "$EGREP -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\""
- $run eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
- $show "$mv \"${export_symbols}T\" \"$export_symbols\""
- $run eval '$mv "${export_symbols}T" "$export_symbols"'
+ if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then
+ func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
+ func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
fi
fi
fi
if test -n "$export_symbols" && test -n "$include_expsyms"; then
- $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"'
+ tmp_export_symbols="$export_symbols"
+ test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
+ $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
fi
+ if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then
+ # The given exports_symbols file has to be filtered, so filter it.
+ func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
+ # FIXME: $output_objdir/$libname.filter potentially contains lots of
+ # 's' commands which not all seds can handle. GNU sed should be fine
+ # though. Also, the filter scales superlinearly with the number of
+ # global variables. join(1) would be nice here, but unfortunately
+ # isn't a blessed tool.
+ $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
+ func_append delfiles " $export_symbols $output_objdir/$libname.filter"
+ export_symbols=$output_objdir/$libname.def
+ $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
+ fi
+
tmp_deplibs=
for test_deplib in $deplibs; do
- case " $convenience " in
- *" $test_deplib "*) ;;
- *)
- tmp_deplibs="$tmp_deplibs $test_deplib"
- ;;
- esac
+ case " $convenience " in
+ *" $test_deplib "*) ;;
+ *)
+ func_append tmp_deplibs " $test_deplib"
+ ;;
+ esac
done
deplibs="$tmp_deplibs"
if test -n "$convenience"; then
+ if test -n "$whole_archive_flag_spec" &&
+ test "$compiler_needs_object" = yes &&
+ test -z "$libobjs"; then
+ # extract the archives, so we have objects to list.
+ # TODO: could optimize this to just extract one archive.
+ whole_archive_flag_spec=
+ fi
if test -n "$whole_archive_flag_spec"; then
save_libobjs=$libobjs
eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+ test "X$libobjs" = "X " && libobjs=
else
gentop="$output_objdir/${outputname}x"
- generated="$generated $gentop"
+ func_append generated " $gentop"
func_extract_archives $gentop $convenience
- libobjs="$libobjs $func_extract_archives_result"
+ func_append libobjs " $func_extract_archives_result"
+ test "X$libobjs" = "X " && libobjs=
fi
fi
-
+
if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
eval flag=\"$thread_safe_flag_spec\"
- linker_flags="$linker_flags $flag"
+ func_append linker_flags " $flag"
fi
# Make a backup of the uninstalled library when relinking
- if test "$mode" = relink; then
- $run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $?
+ if test "$opt_mode" = relink; then
+ $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $?
fi
# Do each of the archive commands.
@@ -4136,22 +8341,24 @@
cmds=$module_cmds
fi
else
- if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
- eval test_cmds=\"$archive_expsym_cmds\"
- cmds=$archive_expsym_cmds
- else
- eval test_cmds=\"$archive_cmds\"
- cmds=$archive_cmds
+ if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+ eval test_cmds=\"$archive_expsym_cmds\"
+ cmds=$archive_expsym_cmds
+ else
+ eval test_cmds=\"$archive_cmds\"
+ cmds=$archive_cmds
fi
fi
if test "X$skipped_export" != "X:" &&
- len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
- test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+ func_len " $test_cmds" &&
+ len=$func_len_result &&
+ test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
:
else
- # The command line is too long to link in one step, link piecewise.
- $echo "creating reloadable object files..."
+ # The command line is too long to link in one step, link piecewise
+ # or, if using GNU ld and skipped_export is not :, use a linker
+ # script.
# Save the value of $output and $libobjs because we want to
# use them later. If we have whole_archive_flag_spec, we
@@ -4165,7 +8372,8 @@
save_libobjs=$libobjs
fi
save_output=$output
- output_la=`$echo "X$output" | $Xsed -e "$basename"`
+ func_basename "$output"
+ output_la=$func_basename_result
# Clear the reloadable object creation command queue and
# initialize k to one.
@@ -4172,71 +8380,164 @@
test_cmds=
concat_cmds=
objlist=
- delfiles=
last_robj=
k=1
- output=$output_objdir/$output_la-${k}.$objext
- # Loop over the list of objects to be linked.
- for obj in $save_libobjs
- do
- eval test_cmds=\"$reload_cmds $objlist $last_robj\"
- if test "X$objlist" = X ||
- { len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
- test "$len" -le "$max_cmd_len"; }; then
- objlist="$objlist $obj"
+
+ if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then
+ output=${output_objdir}/${output_la}.lnkscript
+ func_verbose "creating GNU ld script: $output"
+ echo 'INPUT (' > $output
+ for obj in $save_libobjs
+ do
+ func_to_tool_file "$obj"
+ $ECHO "$func_to_tool_file_result" >> $output
+ done
+ echo ')' >> $output
+ func_append delfiles " $output"
+ func_to_tool_file "$output"
+ output=$func_to_tool_file_result
+ elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then
+ output=${output_objdir}/${output_la}.lnk
+ func_verbose "creating linker input file list: $output"
+ : > $output
+ set x $save_libobjs
+ shift
+ firstobj=
+ if test "$compiler_needs_object" = yes; then
+ firstobj="$1 "
+ shift
+ fi
+ for obj
+ do
+ func_to_tool_file "$obj"
+ $ECHO "$func_to_tool_file_result" >> $output
+ done
+ func_append delfiles " $output"
+ func_to_tool_file "$output"
+ output=$firstobj\"$file_list_spec$func_to_tool_file_result\"
+ else
+ if test -n "$save_libobjs"; then
+ func_verbose "creating reloadable object files..."
+ output=$output_objdir/$output_la-${k}.$objext
+ eval test_cmds=\"$reload_cmds\"
+ func_len " $test_cmds"
+ len0=$func_len_result
+ len=$len0
+
+ # Loop over the list of objects to be linked.
+ for obj in $save_libobjs
+ do
+ func_len " $obj"
+ func_arith $len + $func_len_result
+ len=$func_arith_result
+ if test "X$objlist" = X ||
+ test "$len" -lt "$max_cmd_len"; then
+ func_append objlist " $obj"
+ else
+ # The command $test_cmds is almost too long, add a
+ # command to the queue.
+ if test "$k" -eq 1 ; then
+ # The first file doesn't have a previous command to add.
+ reload_objs=$objlist
+ eval concat_cmds=\"$reload_cmds\"
+ else
+ # All subsequent reloadable object files will link in
+ # the last one created.
+ reload_objs="$objlist $last_robj"
+ eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\"
+ fi
+ last_robj=$output_objdir/$output_la-${k}.$objext
+ func_arith $k + 1
+ k=$func_arith_result
+ output=$output_objdir/$output_la-${k}.$objext
+ objlist=" $obj"
+ func_len " $last_robj"
+ func_arith $len0 + $func_len_result
+ len=$func_arith_result
+ fi
+ done
+ # Handle the remaining objects by creating one last
+ # reloadable object file. All subsequent reloadable object
+ # files will link in the last one created.
+ test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+ reload_objs="$objlist $last_robj"
+ eval concat_cmds=\"\${concat_cmds}$reload_cmds\"
+ if test -n "$last_robj"; then
+ eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\"
+ fi
+ func_append delfiles " $output"
+
else
- # The command $test_cmds is almost too long, add a
- # command to the queue.
- if test "$k" -eq 1 ; then
- # The first file doesn't have a previous command to add.
- eval concat_cmds=\"$reload_cmds $objlist $last_robj\"
- else
- # All subsequent reloadable object files will link in
- # the last one created.
- eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\"
+ output=
+ fi
+
+ if ${skipped_export-false}; then
+ func_verbose "generating symbol list for \`$libname.la'"
+ export_symbols="$output_objdir/$libname.exp"
+ $opt_dry_run || $RM $export_symbols
+ libobjs=$output
+ # Append the command to create the export file.
+ test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+ eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\"
+ if test -n "$last_robj"; then
+ eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
fi
- last_robj=$output_objdir/$output_la-${k}.$objext
- k=`expr $k + 1`
- output=$output_objdir/$output_la-${k}.$objext
- objlist=$obj
- len=1
fi
- done
- # Handle the remaining objects by creating one last
- # reloadable object file. All subsequent reloadable object
- # files will link in the last one created.
- test -z "$concat_cmds" || concat_cmds=$concat_cmds~
- eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\"
- if ${skipped_export-false}; then
- $show "generating symbol list for \`$libname.la'"
- export_symbols="$output_objdir/$libname.exp"
- $run $rm $export_symbols
- libobjs=$output
- # Append the command to create the export file.
- eval concat_cmds=\"\$concat_cmds~$export_symbols_cmds\"
- fi
+ test -n "$save_libobjs" &&
+ func_verbose "creating a temporary reloadable object file: $output"
- # Set up a command to remove the reloadable object files
- # after they are used.
- i=0
- while test "$i" -lt "$k"
- do
- i=`expr $i + 1`
- delfiles="$delfiles $output_objdir/$output_la-${i}.$objext"
- done
+ # Loop through the commands generated above and execute them.
+ save_ifs="$IFS"; IFS='~'
+ for cmd in $concat_cmds; do
+ IFS="$save_ifs"
+ $opt_silent || {
+ func_quote_for_expand "$cmd"
+ eval "func_echo $func_quote_for_expand_result"
+ }
+ $opt_dry_run || eval "$cmd" || {
+ lt_exit=$?
- $echo "creating a temporary reloadable object file: $output"
+ # Restore the uninstalled library and exit
+ if test "$opt_mode" = relink; then
+ ( cd "$output_objdir" && \
+ $RM "${realname}T" && \
+ $MV "${realname}U" "$realname" )
+ fi
- # Loop through the commands generated above and execute them.
- save_ifs="$IFS"; IFS='~'
- for cmd in $concat_cmds; do
+ exit $lt_exit
+ }
+ done
IFS="$save_ifs"
- $show "$cmd"
- $run eval "$cmd" || exit $?
- done
- IFS="$save_ifs"
+ if test -n "$export_symbols_regex" && ${skipped_export-false}; then
+ func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
+ func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
+ fi
+ fi
+
+ if ${skipped_export-false}; then
+ if test -n "$export_symbols" && test -n "$include_expsyms"; then
+ tmp_export_symbols="$export_symbols"
+ test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
+ $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
+ fi
+
+ if test -n "$orig_export_symbols"; then
+ # The given exports_symbols file has to be filtered, so filter it.
+ func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
+ # FIXME: $output_objdir/$libname.filter potentially contains lots of
+ # 's' commands which not all seds can handle. GNU sed should be fine
+ # though. Also, the filter scales superlinearly with the number of
+ # global variables. join(1) would be nice here, but unfortunately
+ # isn't a blessed tool.
+ $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
+ func_append delfiles " $export_symbols $output_objdir/$libname.filter"
+ export_symbols=$output_objdir/$libname.def
+ $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
+ fi
+ fi
+
libobjs=$output
# Restore the value of output.
output=$save_output
@@ -4243,6 +8544,7 @@
if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+ test "X$libobjs" = "X " && libobjs=
fi
# Expand the library linking commands again to reset the
# value of $libobjs for piecewise linking.
@@ -4255,28 +8557,45 @@
cmds=$module_cmds
fi
else
- if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
- cmds=$archive_expsym_cmds
- else
- cmds=$archive_cmds
+ if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+ cmds=$archive_expsym_cmds
+ else
+ cmds=$archive_cmds
fi
fi
+ fi
- # Append the command to remove the reloadable object files
- # to the just-reset $cmds.
- eval cmds=\"\$cmds~\$rm $delfiles\"
+ if test -n "$delfiles"; then
+ # Append the command to remove temporary files to $cmds.
+ eval cmds=\"\$cmds~\$RM $delfiles\"
fi
+
+ # Add any objects from preloaded convenience libraries
+ if test -n "$dlprefiles"; then
+ gentop="$output_objdir/${outputname}x"
+ func_append generated " $gentop"
+
+ func_extract_archives $gentop $dlprefiles
+ func_append libobjs " $func_extract_archives_result"
+ test "X$libobjs" = "X " && libobjs=
+ fi
+
save_ifs="$IFS"; IFS='~'
for cmd in $cmds; do
IFS="$save_ifs"
eval cmd=\"$cmd\"
- $show "$cmd"
- $run eval "$cmd" || {
+ $opt_silent || {
+ func_quote_for_expand "$cmd"
+ eval "func_echo $func_quote_for_expand_result"
+ }
+ $opt_dry_run || eval "$cmd" || {
lt_exit=$?
# Restore the uninstalled library and exit
- if test "$mode" = relink; then
- $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)'
+ if test "$opt_mode" = relink; then
+ ( cd "$output_objdir" && \
+ $RM "${realname}T" && \
+ $MV "${realname}U" "$realname" )
fi
exit $lt_exit
@@ -4285,13 +8604,12 @@
IFS="$save_ifs"
# Restore the uninstalled library and exit
- if test "$mode" = relink; then
- $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $?
+ if test "$opt_mode" = relink; then
+ $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $?
if test -n "$convenience"; then
if test -z "$whole_archive_flag_spec"; then
- $show "${rm}r $gentop"
- $run ${rm}r "$gentop"
+ func_show_eval '${RM}r "$gentop"'
fi
fi
@@ -4301,8 +8619,7 @@
# Create links to the real library.
for linkname in $linknames; do
if test "$realname" != "$linkname"; then
- $show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)"
- $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $?
+ func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?'
fi
done
@@ -4315,39 +8632,35 @@
;;
obj)
+ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+ func_warning "\`-dlopen' is ignored for objects"
+ fi
+
case " $deplibs" in
*\ -l* | *\ -L*)
- $echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2 ;;
+ func_warning "\`-l' and \`-L' are ignored for objects" ;;
esac
- if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
- $echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2
- fi
+ test -n "$rpath" && \
+ func_warning "\`-rpath' is ignored for objects"
- if test -n "$rpath"; then
- $echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2
- fi
+ test -n "$xrpath" && \
+ func_warning "\`-R' is ignored for objects"
- if test -n "$xrpath"; then
- $echo "$modename: warning: \`-R' is ignored for objects" 1>&2
- fi
+ test -n "$vinfo" && \
+ func_warning "\`-version-info' is ignored for objects"
- if test -n "$vinfo"; then
- $echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2
- fi
+ test -n "$release" && \
+ func_warning "\`-release' is ignored for objects"
- if test -n "$release"; then
- $echo "$modename: warning: \`-release' is ignored for objects" 1>&2
- fi
-
case $output in
*.lo)
- if test -n "$objs$old_deplibs"; then
- $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2
- exit $EXIT_FAILURE
- fi
- libobj="$output"
- obj=`$echo "X$output" | $Xsed -e "$lo2o"`
+ test -n "$objs$old_deplibs" && \
+ func_fatal_error "cannot build library object \`$output' from non-libtool objects"
+
+ libobj=$output
+ func_lo2o "$libobj"
+ obj=$func_lo2o_result
;;
*)
libobj=
@@ -4356,7 +8669,7 @@
esac
# Delete the old objects.
- $run $rm $obj $libobj
+ $opt_dry_run || $RM $obj $libobj
# Objects from convenience libraries. This assumes
# single-version convenience libraries. Whenever we create
@@ -4372,10 +8685,10 @@
if test -n "$convenience"; then
if test -n "$whole_archive_flag_spec"; then
eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
- reload_conv_objs=$reload_objs\ `$echo "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'`
+ reload_conv_objs=$reload_objs\ `$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'`
else
gentop="$output_objdir/${obj}x"
- generated="$generated $gentop"
+ func_append generated " $gentop"
func_extract_archives $gentop $convenience
reload_conv_objs="$reload_objs $func_extract_archives_result"
@@ -4382,25 +8695,19 @@
fi
fi
+ # If we're not building shared, we need to use non_pic_objs
+ test "$build_libtool_libs" != yes && libobjs="$non_pic_objects"
+
# Create the old-style object.
- reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
+ reload_objs="$objs$old_deplibs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; /\.lib$/d; $lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
output="$obj"
- cmds=$reload_cmds
- save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- eval cmd=\"$cmd\"
- $show "$cmd"
- $run eval "$cmd" || exit $?
- done
- IFS="$save_ifs"
+ func_execute_cmds "$reload_cmds" 'exit $?'
# Exit if we aren't doing a library object file.
if test -z "$libobj"; then
if test -n "$gentop"; then
- $show "${rm}r $gentop"
- $run ${rm}r $gentop
+ func_show_eval '${RM}r "$gentop"'
fi
exit $EXIT_SUCCESS
@@ -4408,14 +8715,13 @@
if test "$build_libtool_libs" != yes; then
if test -n "$gentop"; then
- $show "${rm}r $gentop"
- $run ${rm}r $gentop
+ func_show_eval '${RM}r "$gentop"'
fi
# Create an invalid libtool object if no PIC, so that we don't
# accidentally link it into a program.
# $show "echo timestamp > $libobj"
- # $run eval "echo timestamp > $libobj" || exit $?
+ # $opt_dry_run || eval "echo timestamp > $libobj" || exit $?
exit $EXIT_SUCCESS
fi
@@ -4423,20 +8729,11 @@
# Only do commands if we really have different PIC objects.
reload_objs="$libobjs $reload_conv_objs"
output="$libobj"
- cmds=$reload_cmds
- save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- eval cmd=\"$cmd\"
- $show "$cmd"
- $run eval "$cmd" || exit $?
- done
- IFS="$save_ifs"
+ func_execute_cmds "$reload_cmds" 'exit $?'
fi
if test -n "$gentop"; then
- $show "${rm}r $gentop"
- $run ${rm}r $gentop
+ func_show_eval '${RM}r "$gentop"'
fi
exit $EXIT_SUCCESS
@@ -4444,39 +8741,45 @@
prog)
case $host in
- *cygwin*) output=`$echo $output | ${SED} -e 's,.exe$,,;s,$,.exe,'` ;;
+ *cygwin*) func_stripname '' '.exe' "$output"
+ output=$func_stripname_result.exe;;
esac
- if test -n "$vinfo"; then
- $echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2
- fi
+ test -n "$vinfo" && \
+ func_warning "\`-version-info' is ignored for programs"
- if test -n "$release"; then
- $echo "$modename: warning: \`-release' is ignored for programs" 1>&2
- fi
+ test -n "$release" && \
+ func_warning "\`-release' is ignored for programs"
- if test "$preload" = yes; then
- if test "$dlopen_support" = unknown && test "$dlopen_self" = unknown &&
- test "$dlopen_self_static" = unknown; then
- $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support."
- fi
- fi
+ test "$preload" = yes \
+ && test "$dlopen_support" = unknown \
+ && test "$dlopen_self" = unknown \
+ && test "$dlopen_self_static" = unknown && \
+ func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support."
case $host in
*-*-rhapsody* | *-*-darwin1.[012])
# On Rhapsody replace the C library is the System framework
- compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
- finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
+ compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's/ -lc / System.ltframework /'`
+ finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's/ -lc / System.ltframework /'`
;;
esac
case $host in
- *darwin*)
- # Don't allow lazy linking, it breaks C++ global constructors
- if test "$tagname" = CXX ; then
- compile_command="$compile_command ${wl}-bind_at_load"
- finalize_command="$finalize_command ${wl}-bind_at_load"
- fi
- ;;
+ *-*-darwin*)
+ # Don't allow lazy linking, it breaks C++ global constructors
+ # But is supposedly fixed on 10.4 or later (yay!).
+ if test "$tagname" = CXX ; then
+ case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
+ 10.[0123])
+ func_append compile_command " ${wl}-bind_at_load"
+ func_append finalize_command " ${wl}-bind_at_load"
+ ;;
+ esac
+ fi
+ # Time to change all our "foo.ltframework" stuff back to "-framework foo"
+ compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+ finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+ ;;
esac
@@ -4489,7 +8792,7 @@
*)
case " $compile_deplibs " in
*" -L$path/$objdir "*)
- new_libs="$new_libs -L$path/$objdir" ;;
+ func_append new_libs " -L$path/$objdir" ;;
esac
;;
esac
@@ -4499,17 +8802,17 @@
-L*)
case " $new_libs " in
*" $deplib "*) ;;
- *) new_libs="$new_libs $deplib" ;;
+ *) func_append new_libs " $deplib" ;;
esac
;;
- *) new_libs="$new_libs $deplib" ;;
+ *) func_append new_libs " $deplib" ;;
esac
done
compile_deplibs="$new_libs"
- compile_command="$compile_command $compile_deplibs"
- finalize_command="$finalize_command $finalize_deplibs"
+ func_append compile_command " $compile_deplibs"
+ func_append finalize_command " $finalize_deplibs"
if test -n "$rpath$xrpath"; then
# If the user specified any rpath flags, then add them.
@@ -4517,7 +8820,7 @@
# This is the magic to use -rpath.
case "$finalize_rpath " in
*" $libdir "*) ;;
- *) finalize_rpath="$finalize_rpath $libdir" ;;
+ *) func_append finalize_rpath " $libdir" ;;
esac
done
fi
@@ -4536,30 +8839,32 @@
*"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
;;
*)
- hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+ func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
;;
esac
fi
else
eval flag=\"$hardcode_libdir_flag_spec\"
- rpath="$rpath $flag"
+ func_append rpath " $flag"
fi
elif test -n "$runpath_var"; then
case "$perm_rpath " in
*" $libdir "*) ;;
- *) perm_rpath="$perm_rpath $libdir" ;;
+ *) func_append perm_rpath " $libdir" ;;
esac
fi
case $host in
- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
- testbindir=`$echo "X$libdir" | $Xsed -e 's*/lib$*/bin*'`
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
+ testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'`
case :$dllsearchpath: in
*":$libdir:"*) ;;
- *) dllsearchpath="$dllsearchpath:$libdir";;
+ ::) dllsearchpath=$libdir;;
+ *) func_append dllsearchpath ":$libdir";;
esac
case :$dllsearchpath: in
*":$testbindir:"*) ;;
- *) dllsearchpath="$dllsearchpath:$testbindir";;
+ ::) dllsearchpath=$testbindir;;
+ *) func_append dllsearchpath ":$testbindir";;
esac
;;
esac
@@ -4585,18 +8890,18 @@
*"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
;;
*)
- hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+ func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
;;
esac
fi
else
eval flag=\"$hardcode_libdir_flag_spec\"
- rpath="$rpath $flag"
+ func_append rpath " $flag"
fi
elif test -n "$runpath_var"; then
case "$finalize_perm_rpath " in
*" $libdir "*) ;;
- *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;;
+ *) func_append finalize_perm_rpath " $libdir" ;;
esac
fi
done
@@ -4610,284 +8915,57 @@
if test -n "$libobjs" && test "$build_old_libs" = yes; then
# Transform all the library objects into standard objects.
- compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
- finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+ compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
+ finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
fi
- dlsyms=
- if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
- if test -n "$NM" && test -n "$global_symbol_pipe"; then
- dlsyms="${outputname}S.c"
- else
- $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2
- fi
- fi
+ func_generate_dlsyms "$outputname" "@PROGRAM@" "no"
- if test -n "$dlsyms"; then
- case $dlsyms in
- "") ;;
- *.c)
- # Discover the nlist of each of the dlfiles.
- nlist="$output_objdir/${outputname}.nm"
-
- $show "$rm $nlist ${nlist}S ${nlist}T"
- $run $rm "$nlist" "${nlist}S" "${nlist}T"
-
- # Parse the name list into a source file.
- $show "creating $output_objdir/$dlsyms"
-
- test -z "$run" && $echo > "$output_objdir/$dlsyms" "\
-/* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */
-/* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */
-
-#ifdef __cplusplus
-extern \"C\" {
-#endif
-
-/* Prevent the only kind of declaration conflicts we can make. */
-#define lt_preloaded_symbols some_other_symbol
-
-/* External symbol declarations for the compiler. */\
-"
-
- if test "$dlself" = yes; then
- $show "generating symbol list for \`$output'"
-
- test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist"
-
- # Add our own program objects to the symbol list.
- progfiles=`$echo "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
- for arg in $progfiles; do
- $show "extracting global C symbols from \`$arg'"
- $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
- done
-
- if test -n "$exclude_expsyms"; then
- $run eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
- $run eval '$mv "$nlist"T "$nlist"'
- fi
-
- if test -n "$export_symbols_regex"; then
- $run eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
- $run eval '$mv "$nlist"T "$nlist"'
- fi
-
- # Prepare the list of exported symbols
- if test -z "$export_symbols"; then
- export_symbols="$output_objdir/$outputname.exp"
- $run $rm $export_symbols
- $run eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
- case $host in
- *cygwin* | *mingw* )
- $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
- $run eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
- ;;
- esac
- else
- $run eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
- $run eval 'grep -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
- $run eval 'mv "$nlist"T "$nlist"'
- case $host in
- *cygwin* | *mingw* )
- $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
- $run eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
- ;;
- esac
- fi
- fi
-
- for arg in $dlprefiles; do
- $show "extracting global C symbols from \`$arg'"
- name=`$echo "$arg" | ${SED} -e 's%^.*/%%'`
- $run eval '$echo ": $name " >> "$nlist"'
- $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
- done
-
- if test -z "$run"; then
- # Make sure we have at least an empty file.
- test -f "$nlist" || : > "$nlist"
-
- if test -n "$exclude_expsyms"; then
- $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
- $mv "$nlist"T "$nlist"
- fi
-
- # Try sorting and uniquifying the output.
- if grep -v "^: " < "$nlist" |
- if sort -k 3 </dev/null >/dev/null 2>&1; then
- sort -k 3
- else
- sort +2
- fi |
- uniq > "$nlist"S; then
- :
- else
- grep -v "^: " < "$nlist" > "$nlist"S
- fi
-
- if test -f "$nlist"S; then
- eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"'
- else
- $echo '/* NONE */' >> "$output_objdir/$dlsyms"
- fi
-
- $echo >> "$output_objdir/$dlsyms" "\
-
-#undef lt_preloaded_symbols
-
-#if defined (__STDC__) && __STDC__
-# define lt_ptr void *
-#else
-# define lt_ptr char *
-# define const
-#endif
-
-/* The mapping between symbol names and symbols. */
-"
-
- case $host in
- *cygwin* | *mingw* )
- $echo >> "$output_objdir/$dlsyms" "\
-/* DATA imports from DLLs on WIN32 can't be const, because
- runtime relocations are performed -- see ld's documentation
- on pseudo-relocs */
-struct {
-"
- ;;
- * )
- $echo >> "$output_objdir/$dlsyms" "\
-const struct {
-"
- ;;
- esac
-
-
- $echo >> "$output_objdir/$dlsyms" "\
- const char *name;
- lt_ptr address;
-}
-lt_preloaded_symbols[] =
-{\
-"
-
- eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$dlsyms"
-
- $echo >> "$output_objdir/$dlsyms" "\
- {0, (lt_ptr) 0}
-};
-
-/* This works around a problem in FreeBSD linker */
-#ifdef FREEBSD_WORKAROUND
-static const void *lt_preloaded_setup() {
- return lt_preloaded_symbols;
-}
-#endif
-
-#ifdef __cplusplus
-}
-#endif\
-"
- fi
-
- pic_flag_for_symtable=
- case $host in
- # compiling the symbol table file with pic_flag works around
- # a FreeBSD bug that causes programs to crash when -lm is
- # linked before any other PIC object. But we must not use
- # pic_flag when linking with -static. The problem exists in
- # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
- *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
- case "$compile_command " in
- *" -static "*) ;;
- *) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND";;
- esac;;
- *-*-hpux*)
- case "$compile_command " in
- *" -static "*) ;;
- *) pic_flag_for_symtable=" $pic_flag";;
- esac
- esac
-
- # Now compile the dynamic symbol file.
- $show "(cd $output_objdir && $LTCC $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")"
- $run eval '(cd $output_objdir && $LTCC $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $?
-
- # Clean up the generated files.
- $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T"
- $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T"
-
- # Transform the symbol file into the correct name.
- case $host in
- *cygwin* | *mingw* )
- if test -f "$output_objdir/${outputname}.def" ; then
- compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%" | $NL2SP`
- finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%" | $NL2SP`
- else
- compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
- finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
- fi
- ;;
- * )
- compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
- finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
- ;;
- esac
- ;;
- *-*-freebsd*)
- # FreeBSD doesn't need this...
- ;;
- *)
- $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
- else
- # We keep going just in case the user didn't refer to
- # lt_preloaded_symbols. The linker will fail if global_symbol_pipe
- # really was required.
-
- # Nullify the symbol file.
- compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s% @SYMFILE@%%" | $NL2SP`
- finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s% @SYMFILE@%%" | $NL2SP`
+ # template prelinking step
+ if test -n "$prelink_cmds"; then
+ func_execute_cmds "$prelink_cmds" 'exit $?'
fi
- if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
+ wrappers_required=yes
+ case $host in
+ *cegcc* | *mingw32ce*)
+ # Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway.
+ wrappers_required=no
+ ;;
+ *cygwin* | *mingw* )
+ if test "$build_libtool_libs" != yes; then
+ wrappers_required=no
+ fi
+ ;;
+ *)
+ if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
+ wrappers_required=no
+ fi
+ ;;
+ esac
+ if test "$wrappers_required" = no; then
# Replace the output file specification.
- compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e 's%@OUTPUT@%'"$output"'%g' | $NL2SP`
+ compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
link_command="$compile_command$compile_rpath"
# We have no uninstalled library dependencies, so finalize right now.
- $show "$link_command"
- $run eval "$link_command"
- exit_status=$?
+ exit_status=0
+ func_show_eval "$link_command" 'exit_status=$?'
+ if test -n "$postlink_cmds"; then
+ func_to_tool_file "$output"
+ postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
+ func_execute_cmds "$postlink_cmds" 'exit $?'
+ fi
+
# Delete the generated files.
- if test -n "$dlsyms"; then
- $show "$rm $output_objdir/${outputname}S.${objext}"
- $run $rm "$output_objdir/${outputname}S.${objext}"
+ if test -f "$output_objdir/${outputname}S.${objext}"; then
+ func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"'
fi
exit $exit_status
fi
- if test -n "$shlibpath_var"; then
- # We should set the shlibpath_var
- rpath=
- for dir in $temp_rpath; do
- case $dir in
- [\\/]* | [A-Za-z]:[\\/]*)
- # Absolute path.
- rpath="$rpath$dir:"
- ;;
- *)
- # Relative path: add a thisdir entry.
- rpath="$rpath\$thisdir/$dir:"
- ;;
- esac
- done
- temp_rpath="$rpath"
- fi
-
if test -n "$compile_shlibpath$finalize_shlibpath"; then
compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
fi
@@ -4902,7 +8980,7 @@
# We should set the runpath_var.
rpath=
for dir in $perm_rpath; do
- rpath="$rpath$dir:"
+ func_append rpath "$dir:"
done
compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
fi
@@ -4910,7 +8988,7 @@
# We should set the runpath_var.
rpath=
for dir in $finalize_perm_rpath; do
- rpath="$rpath$dir:"
+ func_append rpath "$dir:"
done
finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
fi
@@ -4920,12 +8998,18 @@
# We don't need to create a wrapper script.
link_command="$compile_var$compile_command$compile_rpath"
# Replace the output file specification.
- link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
+ link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
# Delete the old output file.
- $run $rm $output
+ $opt_dry_run || $RM $output
# Link the executable and exit
- $show "$link_command"
- $run eval "$link_command" || exit $?
+ func_show_eval "$link_command" 'exit $?'
+
+ if test -n "$postlink_cmds"; then
+ func_to_tool_file "$output"
+ postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
+ func_execute_cmds "$postlink_cmds" 'exit $?'
+ fi
+
exit $EXIT_SUCCESS
fi
@@ -4934,13 +9018,13 @@
link_command="$compile_var$compile_command$compile_rpath"
relink_command="$finalize_var$finalize_command$finalize_rpath"
- $echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2
- $echo "$modename: \`$output' will be relinked during installation" 1>&2
+ func_warning "this platform does not like uninstalled shared libraries"
+ func_warning "\`$output' will be relinked during installation"
else
if test "$fast_install" != no; then
link_command="$finalize_var$compile_command$finalize_rpath"
if test "$fast_install" = yes; then
- relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $SP2NL | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g' | $NL2SP`
+ relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'`
else
# fast_install is set to needless
relink_command=
@@ -4952,16 +9036,21 @@
fi
# Replace the output file specification.
- link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
+ link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
# Delete the old output files.
- $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname
+ $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname
- $show "$link_command"
- $run eval "$link_command" || exit $?
+ func_show_eval "$link_command" 'exit $?'
+ if test -n "$postlink_cmds"; then
+ func_to_tool_file "$output_objdir/$outputname"
+ postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
+ func_execute_cmds "$postlink_cmds" 'exit $?'
+ fi
+
# Now create the wrapper script.
- $show "creating $output"
+ func_verbose "creating $output"
# Quote the relink command for shipping.
if test -n "$relink_command"; then
@@ -4968,592 +9057,77 @@
# Preserve any variables that may affect compiler behavior
for var in $variables_saved_for_relink; do
if eval test -z \"\${$var+set}\"; then
- relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
+ relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
elif eval var_value=\$$var; test -z "$var_value"; then
relink_command="$var=; export $var; $relink_command"
else
- var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
- relink_command="$var=\"$var_value\"; export $var; $relink_command"
+ func_quote_for_eval "$var_value"
+ relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
fi
done
relink_command="(cd `pwd`; $relink_command)"
- relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e "$sed_quote_subst" | $NL2SP`
+ relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
fi
- # Quote $echo for shipping.
- if test "X$echo" = "X$SHELL $progpath --fallback-echo"; then
- case $progpath in
- [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";;
- *) qecho="$SHELL `pwd`/$progpath --fallback-echo";;
- esac
- qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"`
- else
- qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"`
- fi
-
- # Only actually do things if our run command is non-null.
- if test -z "$run"; then
+ # Only actually do things if not in dry run mode.
+ $opt_dry_run || {
# win32 will think the script is a binary if it has
# a .exe suffix, so we strip it off here.
case $output in
- *.exe) output=`$echo $output|${SED} 's,.exe$,,'` ;;
+ *.exe) func_stripname '' '.exe' "$output"
+ output=$func_stripname_result ;;
esac
# test for cygwin because mv fails w/o .exe extensions
case $host in
*cygwin*)
exeext=.exe
- outputname=`$echo $outputname|${SED} 's,.exe$,,'` ;;
+ func_stripname '' '.exe' "$outputname"
+ outputname=$func_stripname_result ;;
*) exeext= ;;
esac
case $host in
*cygwin* | *mingw* )
- output_name=`basename $output`
- output_path=`dirname $output`
- cwrappersource="$output_path/$objdir/lt-$output_name.c"
- cwrapper="$output_path/$output_name.exe"
- $rm $cwrappersource $cwrapper
- trap "$rm $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
+ func_dirname_and_basename "$output" "" "."
+ output_name=$func_basename_result
+ output_path=$func_dirname_result
+ cwrappersource="$output_path/$objdir/lt-$output_name.c"
+ cwrapper="$output_path/$output_name.exe"
+ $RM $cwrappersource $cwrapper
+ trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
- cat > $cwrappersource <<EOF
+ func_emit_cwrapperexe_src > $cwrappersource
-/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
- Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
+ # The wrapper executable is built using the $host compiler,
+ # because it contains $host paths and files. If cross-
+ # compiling, it, like the target executable, must be
+ # executed on the $host or under an emulation environment.
+ $opt_dry_run || {
+ $LTCC $LTCFLAGS -o $cwrapper $cwrappersource
+ $STRIP $cwrapper
+ }
- The $output program cannot be directly executed until all the libtool
- libraries that it depends on are installed.
-
- This wrapper executable should never be moved out of the build directory.
- If it is, it will not operate correctly.
-
- Currently, it simply execs the wrapper *script* "/bin/sh $output",
- but could eventually absorb all of the scripts functionality and
- exec $objdir/$outputname directly.
-*/
-EOF
- cat >> $cwrappersource<<"EOF"
-#include <stdio.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <malloc.h>
-#include <stdarg.h>
-#include <assert.h>
-#include <string.h>
-#include <ctype.h>
-#include <sys/stat.h>
-
-#if defined(PATH_MAX)
-# define LT_PATHMAX PATH_MAX
-#elif defined(MAXPATHLEN)
-# define LT_PATHMAX MAXPATHLEN
-#else
-# define LT_PATHMAX 1024
-#endif
-
-#ifndef DIR_SEPARATOR
-# define DIR_SEPARATOR '/'
-# define PATH_SEPARATOR ':'
-#endif
-
-#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
- defined (__OS2__)
-# define HAVE_DOS_BASED_FILE_SYSTEM
-# ifndef DIR_SEPARATOR_2
-# define DIR_SEPARATOR_2 '\\'
-# endif
-# ifndef PATH_SEPARATOR_2
-# define PATH_SEPARATOR_2 ';'
-# endif
-#endif
-
-#ifndef DIR_SEPARATOR_2
-# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
-#else /* DIR_SEPARATOR_2 */
-# define IS_DIR_SEPARATOR(ch) \
- (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
-#endif /* DIR_SEPARATOR_2 */
-
-#ifndef PATH_SEPARATOR_2
-# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
-#else /* PATH_SEPARATOR_2 */
-# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
-#endif /* PATH_SEPARATOR_2 */
-
-#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type)))
-#define XFREE(stale) do { \
- if (stale) { free ((void *) stale); stale = 0; } \
-} while (0)
-
-/* -DDEBUG is fairly common in CFLAGS. */
-#undef DEBUG
-#if defined DEBUGWRAPPER
-# define DEBUG(format, ...) fprintf(stderr, format, __VA_ARGS__)
-#else
-# define DEBUG(format, ...)
-#endif
-
-const char *program_name = NULL;
-
-void * xmalloc (size_t num);
-char * xstrdup (const char *string);
-const char * base_name (const char *name);
-char * find_executable(const char *wrapper);
-int check_executable(const char *path);
-char * strendzap(char *str, const char *pat);
-void lt_fatal (const char *message, ...);
-
-int
-main (int argc, char *argv[])
-{
- char **newargz;
- int i;
-
- program_name = (char *) xstrdup (base_name (argv[0]));
- DEBUG("(main) argv[0] : %s\n",argv[0]);
- DEBUG("(main) program_name : %s\n",program_name);
- newargz = XMALLOC(char *, argc+2);
-EOF
-
- cat >> $cwrappersource <<EOF
- newargz[0] = (char *) xstrdup("$SHELL");
-EOF
-
- cat >> $cwrappersource <<"EOF"
- newargz[1] = find_executable(argv[0]);
- if (newargz[1] == NULL)
- lt_fatal("Couldn't find %s", argv[0]);
- DEBUG("(main) found exe at : %s\n",newargz[1]);
- /* we know the script has the same name, without the .exe */
- /* so make sure newargz[1] doesn't end in .exe */
- strendzap(newargz[1],".exe");
- for (i = 1; i < argc; i++)
- newargz[i+1] = xstrdup(argv[i]);
- newargz[argc+1] = NULL;
-
- for (i=0; i<argc+1; i++)
- {
- DEBUG("(main) newargz[%d] : %s\n",i,newargz[i]);
- ;
- }
-
-EOF
-
- case $host_os in
- mingw*)
- cat >> $cwrappersource <<EOF
- execv("$SHELL",(char const **)newargz);
-EOF
- ;;
- *)
- cat >> $cwrappersource <<EOF
- execv("$SHELL",newargz);
-EOF
- ;;
- esac
-
- cat >> $cwrappersource <<"EOF"
- return 127;
-}
-
-void *
-xmalloc (size_t num)
-{
- void * p = (void *) malloc (num);
- if (!p)
- lt_fatal ("Memory exhausted");
-
- return p;
-}
-
-char *
-xstrdup (const char *string)
-{
- return string ? strcpy ((char *) xmalloc (strlen (string) + 1), string) : NULL
-;
-}
-
-const char *
-base_name (const char *name)
-{
- const char *base;
-
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
- /* Skip over the disk name in MSDOS pathnames. */
- if (isalpha ((unsigned char)name[0]) && name[1] == ':')
- name += 2;
-#endif
-
- for (base = name; *name; name++)
- if (IS_DIR_SEPARATOR (*name))
- base = name + 1;
- return base;
-}
-
-int
-check_executable(const char * path)
-{
- struct stat st;
-
- DEBUG("(check_executable) : %s\n", path ? (*path ? path : "EMPTY!") : "NULL!");
- if ((!path) || (!*path))
- return 0;
-
- if ((stat (path, &st) >= 0) &&
- (
- /* MinGW & native WIN32 do not support S_IXOTH or S_IXGRP */
-#if defined (S_IXOTH)
- ((st.st_mode & S_IXOTH) == S_IXOTH) ||
-#endif
-#if defined (S_IXGRP)
- ((st.st_mode & S_IXGRP) == S_IXGRP) ||
-#endif
- ((st.st_mode & S_IXUSR) == S_IXUSR))
- )
- return 1;
- else
- return 0;
-}
-
-/* Searches for the full path of the wrapper. Returns
- newly allocated full path name if found, NULL otherwise */
-char *
-find_executable (const char* wrapper)
-{
- int has_slash = 0;
- const char* p;
- const char* p_next;
- /* static buffer for getcwd */
- char tmp[LT_PATHMAX + 1];
- int tmp_len;
- char* concat_name;
-
- DEBUG("(find_executable) : %s\n", wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!");
-
- if ((wrapper == NULL) || (*wrapper == '\0'))
- return NULL;
-
- /* Absolute path? */
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
- if (isalpha ((unsigned char)wrapper[0]) && wrapper[1] == ':')
- {
- concat_name = xstrdup (wrapper);
- if (check_executable(concat_name))
- return concat_name;
- XFREE(concat_name);
- }
- else
- {
-#endif
- if (IS_DIR_SEPARATOR (wrapper[0]))
- {
- concat_name = xstrdup (wrapper);
- if (check_executable(concat_name))
- return concat_name;
- XFREE(concat_name);
- }
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
- }
-#endif
-
- for (p = wrapper; *p; p++)
- if (*p == '/')
- {
- has_slash = 1;
- break;
- }
- if (!has_slash)
- {
- /* no slashes; search PATH */
- const char* path = getenv ("PATH");
- if (path != NULL)
- {
- for (p = path; *p; p = p_next)
- {
- const char* q;
- size_t p_len;
- for (q = p; *q; q++)
- if (IS_PATH_SEPARATOR(*q))
- break;
- p_len = q - p;
- p_next = (*q == '\0' ? q : q + 1);
- if (p_len == 0)
- {
- /* empty path: current directory */
- if (getcwd (tmp, LT_PATHMAX) == NULL)
- lt_fatal ("getcwd failed");
- tmp_len = strlen(tmp);
- concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1);
- memcpy (concat_name, tmp, tmp_len);
- concat_name[tmp_len] = '/';
- strcpy (concat_name + tmp_len + 1, wrapper);
- }
- else
- {
- concat_name = XMALLOC(char, p_len + 1 + strlen(wrapper) + 1);
- memcpy (concat_name, p, p_len);
- concat_name[p_len] = '/';
- strcpy (concat_name + p_len + 1, wrapper);
- }
- if (check_executable(concat_name))
- return concat_name;
- XFREE(concat_name);
- }
- }
- /* not found in PATH; assume curdir */
- }
- /* Relative path | not found in path: prepend cwd */
- if (getcwd (tmp, LT_PATHMAX) == NULL)
- lt_fatal ("getcwd failed");
- tmp_len = strlen(tmp);
- concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1);
- memcpy (concat_name, tmp, tmp_len);
- concat_name[tmp_len] = '/';
- strcpy (concat_name + tmp_len + 1, wrapper);
-
- if (check_executable(concat_name))
- return concat_name;
- XFREE(concat_name);
- return NULL;
-}
-
-char *
-strendzap(char *str, const char *pat)
-{
- size_t len, patlen;
-
- assert(str != NULL);
- assert(pat != NULL);
-
- len = strlen(str);
- patlen = strlen(pat);
-
- if (patlen <= len)
- {
- str += len - patlen;
- if (strcmp(str, pat) == 0)
- *str = '\0';
- }
- return str;
-}
-
-static void
-lt_error_core (int exit_status, const char * mode,
- const char * message, va_list ap)
-{
- fprintf (stderr, "%s: %s: ", program_name, mode);
- vfprintf (stderr, message, ap);
- fprintf (stderr, ".\n");
-
- if (exit_status >= 0)
- exit (exit_status);
-}
-
-void
-lt_fatal (const char *message, ...)
-{
- va_list ap;
- va_start (ap, message);
- lt_error_core (EXIT_FAILURE, "FATAL", message, ap);
- va_end (ap);
-}
-EOF
- # we should really use a build-platform specific compiler
- # here, but OTOH, the wrappers (shell script and this C one)
- # are only useful if you want to execute the "real" binary.
- # Since the "real" binary is built for $host, then this
- # wrapper might as well be built for $host, too.
- $run $LTCC $LTCFLAGS -s -o $cwrapper $cwrappersource
- ;;
- esac
- $rm $output
- trap "$rm $output; exit $EXIT_FAILURE" 1 2 15
-
- $echo > $output "\
-#! $SHELL
-
-# $output - temporary wrapper script for $objdir/$outputname
-# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
-#
-# The $output program cannot be directly executed until all the libtool
-# libraries that it depends on are installed.
-#
-# This wrapper script should never be moved out of the build directory.
-# If it is, it will not operate correctly.
-
-# Sed substitution that helps us do robust quoting. It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed='${SED} -e 1s/^X//'
-sed_quote_subst='$sed_quote_subst'
-
-# Be Bourne compatible (taken from Autoconf:_AS_BOURNE_COMPATIBLE).
-if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
- emulate sh
- NULLCMD=:
- # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '\${1+\"\$@\"}'='\"\$@\"'
- setopt NO_GLOB_SUBST
-else
- case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
-fi
-BIN_SH=xpg4; export BIN_SH # for Tru64
-DUALCASE=1; export DUALCASE # for MKS sh
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-relink_command=\"$relink_command\"
-
-# This environment variable determines our operation mode.
-if test \"\$libtool_install_magic\" = \"$magic\"; then
- # install mode needs the following variable:
- notinst_deplibs='$notinst_deplibs'
-else
- # When we are sourced in execute mode, \$file and \$echo are already set.
- if test \"\$libtool_execute_magic\" != \"$magic\"; then
- echo=\"$qecho\"
- file=\"\$0\"
- # Make sure echo works.
- if test \"X\$1\" = X--no-reexec; then
- # Discard the --no-reexec flag, and continue.
- shift
- elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then
- # Yippee, \$echo works!
- :
- else
- # Restart under the correct shell, and then maybe \$echo will work.
- exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
- fi
- fi\
-"
- $echo >> $output "\
-
- # Find the directory that this script lives in.
- thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
- test \"x\$thisdir\" = \"x\$file\" && thisdir=.
-
- # Follow symbolic links until we get to the real thisdir.
- file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\`
- while test -n \"\$file\"; do
- destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
-
- # If there was a directory component, then change thisdir.
- if test \"x\$destdir\" != \"x\$file\"; then
- case \"\$destdir\" in
- [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
- *) thisdir=\"\$thisdir/\$destdir\" ;;
- esac
- fi
-
- file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
- file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`
- done
-
- # Try to get the absolute directory name.
- absdir=\`cd \"\$thisdir\" && pwd\`
- test -n \"\$absdir\" && thisdir=\"\$absdir\"
-"
-
- if test "$fast_install" = yes; then
- $echo >> $output "\
- program=lt-'$outputname'$exeext
- progdir=\"\$thisdir/$objdir\"
-
- if test ! -f \"\$progdir/\$program\" || \\
- { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
- test \"X\$file\" != \"X\$progdir/\$program\"; }; then
-
- file=\"\$\$-\$program\"
-
- if test ! -d \"\$progdir\"; then
- $mkdir \"\$progdir\"
- else
- $rm \"\$progdir/\$file\"
- fi"
-
- $echo >> $output "\
-
- # relink executable if necessary
- if test -n \"\$relink_command\"; then
- if relink_command_output=\`eval \$relink_command 2>&1\`; then :
- else
- $echo \"\$relink_command_output\" >&2
- $rm \"\$progdir/\$file\"
- exit $EXIT_FAILURE
- fi
- fi
-
- $mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
- { $rm \"\$progdir/\$program\";
- $mv \"\$progdir/\$file\" \"\$progdir/\$program\"; }
- $rm \"\$progdir/\$file\"
- fi"
- else
- $echo >> $output "\
- program='$outputname'
- progdir=\"\$thisdir/$objdir\"
-"
- fi
-
- $echo >> $output "\
-
- if test -f \"\$progdir/\$program\"; then"
-
- # Export our shlibpath_var if we have one.
- if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
- $echo >> $output "\
- # Add our own library path to $shlibpath_var
- $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
-
- # Some systems cannot cope with colon-terminated $shlibpath_var
- # The second colon is a workaround for a bug in BeOS R4 sed
- $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
-
- export $shlibpath_var
-"
- fi
-
- # fixup the dll searchpath if we need to.
- if test -n "$dllsearchpath"; then
- $echo >> $output "\
- # Add the dll search path components to the executable PATH
- PATH=$dllsearchpath:\$PATH
-"
- fi
-
- $echo >> $output "\
- if test \"\$libtool_execute_magic\" != \"$magic\"; then
- # Run the actual program with our arguments.
-"
- case $host in
- # Backslashes separate directories on plain windows
- *-*-mingw | *-*-os2*)
- $echo >> $output "\
- exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
-"
+ # Now, create the wrapper script for func_source use:
+ func_ltwrapper_scriptname $cwrapper
+ $RM $func_ltwrapper_scriptname_result
+ trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15
+ $opt_dry_run || {
+ # note: this script will not be executed, so do not chmod.
+ if test "x$build" = "x$host" ; then
+ $cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result
+ else
+ func_emit_wrapper no > $func_ltwrapper_scriptname_result
+ fi
+ }
;;
+ * )
+ $RM $output
+ trap "$RM $output; exit $EXIT_FAILURE" 1 2 15
- *)
- $echo >> $output "\
- exec \"\$progdir/\$program\" \${1+\"\$@\"}
-"
+ func_emit_wrapper no > $output
+ chmod +x $output
;;
esac
- $echo >> $output "\
- \$echo \"\$0: cannot exec \$program \$*\"
- exit $EXIT_FAILURE
- fi
- else
- # The program doesn't exist.
- \$echo \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
- \$echo \"This script is just a wrapper for \$program.\" 1>&2
- $echo \"See the $PACKAGE documentation for more information.\" 1>&2
- exit $EXIT_FAILURE
- fi
-fi\
-"
- chmod +x $output
- fi
+ }
exit $EXIT_SUCCESS
;;
esac
@@ -5562,7 +9136,7 @@
for oldlib in $oldlibs; do
if test "$build_libtool_libs" = convenience; then
- oldobjs="$libobjs_save"
+ oldobjs="$libobjs_save $symfileobj"
addlibs="$convenience"
build_libtool_libs=no
else
@@ -5571,6 +9145,9 @@
build_libtool_libs=no
else
oldobjs="$old_deplibs $non_pic_objects"
+ if test "$preload" = yes && test -f "$symfileobj"; then
+ func_append oldobjs " $symfileobj"
+ fi
fi
addlibs="$old_convenience"
fi
@@ -5577,16 +9154,26 @@
if test -n "$addlibs"; then
gentop="$output_objdir/${outputname}x"
- generated="$generated $gentop"
+ func_append generated " $gentop"
func_extract_archives $gentop $addlibs
- oldobjs="$oldobjs $func_extract_archives_result"
+ func_append oldobjs " $func_extract_archives_result"
fi
# Do each command in the archive commands.
if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
- cmds=$old_archive_from_new_cmds
+ cmds=$old_archive_from_new_cmds
else
+
+ # Add any objects from preloaded convenience libraries
+ if test -n "$dlprefiles"; then
+ gentop="$output_objdir/${outputname}x"
+ func_append generated " $gentop"
+
+ func_extract_archives $gentop $dlprefiles
+ func_append oldobjs " $func_extract_archives_result"
+ fi
+
# POSIX demands no paths to be encoded in archives. We have
# to avoid creating archives with duplicate basenames if we
# might have to extract them afterwards, e.g., when creating a
@@ -5595,32 +9182,22 @@
# not supported by libtool).
if (for obj in $oldobjs
do
- $echo "X$obj" | $Xsed -e 's%^.*/%%'
+ func_basename "$obj"
+ $ECHO "$func_basename_result"
done | sort | sort -uc >/dev/null 2>&1); then
:
else
- $echo "copying selected object files to avoid basename conflicts..."
-
- if test -z "$gentop"; then
- gentop="$output_objdir/${outputname}x"
- generated="$generated $gentop"
-
- $show "${rm}r $gentop"
- $run ${rm}r "$gentop"
- $show "$mkdir $gentop"
- $run $mkdir "$gentop"
- exit_status=$?
- if test "$exit_status" -ne 0 && test ! -d "$gentop"; then
- exit $exit_status
- fi
- fi
-
+ echo "copying selected object files to avoid basename conflicts..."
+ gentop="$output_objdir/${outputname}x"
+ func_append generated " $gentop"
+ func_mkdir_p "$gentop"
save_oldobjs=$oldobjs
oldobjs=
counter=1
for obj in $save_oldobjs
do
- objbase=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
+ func_basename "$obj"
+ objbase="$func_basename_result"
case " $oldobjs " in
" ") oldobjs=$obj ;;
*[\ /]"$objbase "*)
@@ -5628,58 +9205,74 @@
# Make sure we don't pick an alternate name that also
# overlaps.
newobj=lt$counter-$objbase
- counter=`expr $counter + 1`
+ func_arith $counter + 1
+ counter=$func_arith_result
case " $oldobjs " in
*[\ /]"$newobj "*) ;;
*) if test ! -f "$gentop/$newobj"; then break; fi ;;
esac
done
- $show "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
- $run ln "$obj" "$gentop/$newobj" ||
- $run cp "$obj" "$gentop/$newobj"
- oldobjs="$oldobjs $gentop/$newobj"
+ func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
+ func_append oldobjs " $gentop/$newobj"
;;
- *) oldobjs="$oldobjs $obj" ;;
+ *) func_append oldobjs " $obj" ;;
esac
done
fi
-
+ func_to_tool_file "$oldlib" func_convert_file_msys_to_w32
+ tool_oldlib=$func_to_tool_file_result
eval cmds=\"$old_archive_cmds\"
- if len=`expr "X$cmds" : ".*"` &&
- test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+ func_len " $cmds"
+ len=$func_len_result
+ if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
cmds=$old_archive_cmds
+ elif test -n "$archiver_list_spec"; then
+ func_verbose "using command file archive linking..."
+ for obj in $oldobjs
+ do
+ func_to_tool_file "$obj"
+ $ECHO "$func_to_tool_file_result"
+ done > $output_objdir/$libname.libcmd
+ func_to_tool_file "$output_objdir/$libname.libcmd"
+ oldobjs=" $archiver_list_spec$func_to_tool_file_result"
+ cmds=$old_archive_cmds
else
# the command line is too long to link in one step, link in parts
- $echo "using piecewise archive linking..."
+ func_verbose "using piecewise archive linking..."
save_RANLIB=$RANLIB
RANLIB=:
objlist=
concat_cmds=
save_oldobjs=$oldobjs
-
+ oldobjs=
# Is there a better way of finding the last object in the list?
for obj in $save_oldobjs
do
last_oldobj=$obj
done
+ eval test_cmds=\"$old_archive_cmds\"
+ func_len " $test_cmds"
+ len0=$func_len_result
+ len=$len0
for obj in $save_oldobjs
do
- oldobjs="$objlist $obj"
- objlist="$objlist $obj"
- eval test_cmds=\"$old_archive_cmds\"
- if len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
- test "$len" -le "$max_cmd_len"; then
+ func_len " $obj"
+ func_arith $len + $func_len_result
+ len=$func_arith_result
+ func_append objlist " $obj"
+ if test "$len" -lt "$max_cmd_len"; then
:
else
# the above command should be used before it gets too long
oldobjs=$objlist
if test "$obj" = "$last_oldobj" ; then
- RANLIB=$save_RANLIB
+ RANLIB=$save_RANLIB
fi
test -z "$concat_cmds" || concat_cmds=$concat_cmds~
eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
objlist=
+ len=$len0
fi
done
RANLIB=$save_RANLIB
@@ -5691,20 +9284,11 @@
fi
fi
fi
- save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- eval cmd=\"$cmd\"
- IFS="$save_ifs"
- $show "$cmd"
- $run eval "$cmd" || exit $?
- done
- IFS="$save_ifs"
+ func_execute_cmds "$cmds" 'exit $?'
done
- if test -n "$generated"; then
- $show "${rm}r$generated"
- $run ${rm}r$generated
- fi
+ test -n "$generated" && \
+ func_show_eval "${RM}r$generated"
# Now create the libtool archive.
case $output in
@@ -5711,29 +9295,28 @@
*.la)
old_library=
test "$build_old_libs" = yes && old_library="$libname.$libext"
- $show "creating $output"
+ func_verbose "creating $output"
# Preserve any variables that may affect compiler behavior
for var in $variables_saved_for_relink; do
if eval test -z \"\${$var+set}\"; then
- relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
+ relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
elif eval var_value=\$$var; test -z "$var_value"; then
relink_command="$var=; export $var; $relink_command"
else
- var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
- relink_command="$var=\"$var_value\"; export $var; $relink_command"
+ func_quote_for_eval "$var_value"
+ relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
fi
done
# Quote the link command for shipping.
relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
- relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e "$sed_quote_subst" | $NL2SP`
+ relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
if test "$hardcode_automatic" = yes ; then
relink_command=
fi
-
# Only create the output if not a dry run.
- if test -z "$run"; then
+ $opt_dry_run || {
for installed in no yes; do
if test "$installed" = yes; then
if test -z "$install_libdir"; then
@@ -5745,38 +9328,60 @@
for deplib in $dependency_libs; do
case $deplib in
*.la)
- name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'`
- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
- if test -z "$libdir"; then
- $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
- exit $EXIT_FAILURE
- fi
- newdependency_libs="$newdependency_libs $libdir/$name"
+ func_basename "$deplib"
+ name="$func_basename_result"
+ func_resolve_sysroot "$deplib"
+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result`
+ test -z "$libdir" && \
+ func_fatal_error "\`$deplib' is not a valid libtool archive"
+ func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name"
;;
- *) newdependency_libs="$newdependency_libs $deplib" ;;
+ -L*)
+ func_stripname -L '' "$deplib"
+ func_replace_sysroot "$func_stripname_result"
+ func_append newdependency_libs " -L$func_replace_sysroot_result"
+ ;;
+ -R*)
+ func_stripname -R '' "$deplib"
+ func_replace_sysroot "$func_stripname_result"
+ func_append newdependency_libs " -R$func_replace_sysroot_result"
+ ;;
+ *) func_append newdependency_libs " $deplib" ;;
esac
done
dependency_libs="$newdependency_libs"
newdlfiles=
+
for lib in $dlfiles; do
- name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
- if test -z "$libdir"; then
- $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
- exit $EXIT_FAILURE
- fi
- newdlfiles="$newdlfiles $libdir/$name"
+ case $lib in
+ *.la)
+ func_basename "$lib"
+ name="$func_basename_result"
+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+ test -z "$libdir" && \
+ func_fatal_error "\`$lib' is not a valid libtool archive"
+ func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name"
+ ;;
+ *) func_append newdlfiles " $lib" ;;
+ esac
done
dlfiles="$newdlfiles"
newdlprefiles=
for lib in $dlprefiles; do
- name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
- if test -z "$libdir"; then
- $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
- exit $EXIT_FAILURE
- fi
- newdlprefiles="$newdlprefiles $libdir/$name"
+ case $lib in
+ *.la)
+ # Only pass preopened files to the pseudo-archive (for
+ # eventual linking with the app. that links it) if we
+ # didn't already link the preopened objects directly into
+ # the library:
+ func_basename "$lib"
+ name="$func_basename_result"
+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+ test -z "$libdir" && \
+ func_fatal_error "\`$lib' is not a valid libtool archive"
+ func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name"
+ ;;
+ esac
done
dlprefiles="$newdlprefiles"
else
@@ -5786,7 +9391,7 @@
[\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
*) abs=`pwd`"/$lib" ;;
esac
- newdlfiles="$newdlfiles $abs"
+ func_append newdlfiles " $abs"
done
dlfiles="$newdlfiles"
newdlprefiles=
@@ -5795,19 +9400,37 @@
[\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
*) abs=`pwd`"/$lib" ;;
esac
- newdlprefiles="$newdlprefiles $abs"
+ func_append newdlprefiles " $abs"
done
dlprefiles="$newdlprefiles"
fi
- $rm $output
+ $RM $output
# place dlname in correct position for cygwin
+ # In fact, it would be nice if we could use this code for all target
+ # systems that can't hard-code library paths into their executables
+ # and that have no shared library path variable independent of PATH,
+ # but it turns out we can't easily determine that from inspecting
+ # libtool variables, so we have to hard-code the OSs to which it
+ # applies here; at the moment, that means platforms that use the PE
+ # object format with DLL files. See the long comment at the top of
+ # tests/bindir.at for full details.
tdlname=$dlname
case $host,$output,$installed,$module,$dlname in
- *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
+ *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll)
+ # If a -bindir argument was supplied, place the dll there.
+ if test "x$bindir" != x ;
+ then
+ func_relative_path "$install_libdir" "$bindir"
+ tdlname=$func_relative_path_result$dlname
+ else
+ # Otherwise fall back on heuristic.
+ tdlname=../bin/$dlname
+ fi
+ ;;
esac
- $echo > $output "\
+ $ECHO > $output "\
# $outputname - a libtool library file
-# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
+# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
#
# Please DO NOT delete this file!
# It is necessary for linking the library.
@@ -5821,9 +9444,15 @@
# The name of the static archive.
old_library='$old_library'
+# Linker flags that can not go in dependency_libs.
+inherited_linker_flags='$new_inherited_linker_flags'
+
# Libraries that this one depends upon.
dependency_libs='$dependency_libs'
+# Names of additional weak libraries provided by this library
+weak_library_names='$weak_libs'
+
# Version information for $libname.
current=$current
age=$age
@@ -5842,749 +9471,30 @@
# Directory that this library needs to be installed in:
libdir='$install_libdir'"
if test "$installed" = no && test "$need_relink" = yes; then
- $echo >> $output "\
+ $ECHO >> $output "\
relink_command=\"$relink_command\""
fi
done
- fi
+ }
# Do a symbolic link so that the libtool archive can be found in
# LD_LIBRARY_PATH before the program is installed.
- $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)"
- $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $?
+ func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?'
;;
esac
exit $EXIT_SUCCESS
- ;;
+}
- # libtool install mode
- install)
- modename="$modename: install"
+{ test "$opt_mode" = link || test "$opt_mode" = relink; } &&
+ func_mode_link ${1+"$@"}
- # There may be an optional sh(1) argument at the beginning of
- # install_prog (especially on Windows NT).
- if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
- # Allow the use of GNU shtool's install command.
- $echo "X$nonopt" | grep shtool > /dev/null; then
- # Aesthetically quote it.
- arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"`
- case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- arg="\"$arg\""
- ;;
- esac
- install_prog="$arg "
- arg="$1"
- shift
- else
- install_prog=
- arg=$nonopt
- fi
- # The real first argument should be the name of the installation program.
- # Aesthetically quote it.
- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
- case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- arg="\"$arg\""
- ;;
- esac
- install_prog="$install_prog$arg"
-
- # We need to accept at least all the BSD install flags.
- dest=
+# func_mode_uninstall arg...
+func_mode_uninstall ()
+{
+ $opt_debug
+ RM="$nonopt"
files=
- opts=
- prev=
- install_type=
- isdir=no
- stripme=
- for arg
- do
- if test -n "$dest"; then
- files="$files $dest"
- dest=$arg
- continue
- fi
-
- case $arg in
- -d) isdir=yes ;;
- -f)
- case " $install_prog " in
- *[\\\ /]cp\ *) ;;
- *) prev=$arg ;;
- esac
- ;;
- -g | -m | -o) prev=$arg ;;
- -s)
- stripme=" -s"
- continue
- ;;
- -*)
- ;;
- *)
- # If the previous option needed an argument, then skip it.
- if test -n "$prev"; then
- prev=
- else
- dest=$arg
- continue
- fi
- ;;
- esac
-
- # Aesthetically quote the argument.
- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
- case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- arg="\"$arg\""
- ;;
- esac
- install_prog="$install_prog $arg"
- done
-
- if test -z "$install_prog"; then
- $echo "$modename: you must specify an install program" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
-
- if test -n "$prev"; then
- $echo "$modename: the \`$prev' option requires an argument" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
-
- if test -z "$files"; then
- if test -z "$dest"; then
- $echo "$modename: no file or destination specified" 1>&2
- else
- $echo "$modename: you must specify a destination" 1>&2
- fi
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
-
- # Strip any trailing slash from the destination.
- dest=`$echo "X$dest" | $Xsed -e 's%/$%%'`
-
- # Check to see that the destination is a directory.
- test -d "$dest" && isdir=yes
- if test "$isdir" = yes; then
- destdir="$dest"
- destname=
- else
- destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'`
- test "X$destdir" = "X$dest" && destdir=.
- destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'`
-
- # Not a directory, so check to see that there is only one file specified.
- set dummy $files
- if test "$#" -gt 2; then
- $echo "$modename: \`$dest' is not a directory" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
- fi
- case $destdir in
- [\\/]* | [A-Za-z]:[\\/]*) ;;
- *)
- for file in $files; do
- case $file in
- *.lo) ;;
- *)
- $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
- done
- ;;
- esac
-
- # This variable tells wrapper scripts just to set variables rather
- # than running their programs.
- libtool_install_magic="$magic"
-
- staticlibs=
- future_libdirs=
- current_libdirs=
- for file in $files; do
-
- # Do each installation.
- case $file in
- *.$libext)
- # Do the static libraries later.
- staticlibs="$staticlibs $file"
- ;;
-
- *.la)
- # Check to see that this really is a libtool archive.
- if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
- else
- $echo "$modename: \`$file' is not a valid libtool archive" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
-
- library_names=
- old_library=
- relink_command=
- # If there is no directory component, then add one.
- case $file in
- */* | *\\*) . $file ;;
- *) . ./$file ;;
- esac
-
- # Add the libdir to current_libdirs if it is the destination.
- if test "X$destdir" = "X$libdir"; then
- case "$current_libdirs " in
- *" $libdir "*) ;;
- *) current_libdirs="$current_libdirs $libdir" ;;
- esac
- else
- # Note the libdir as a future libdir.
- case "$future_libdirs " in
- *" $libdir "*) ;;
- *) future_libdirs="$future_libdirs $libdir" ;;
- esac
- fi
-
- dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/
- test "X$dir" = "X$file/" && dir=
- dir="$dir$objdir"
-
- if test -n "$relink_command"; then
- # Determine the prefix the user has applied to our future dir.
- inst_prefix_dir=`$echo "$destdir" | $SED "s%$libdir\$%%"`
-
- # Don't allow the user to place us outside of our expected
- # location b/c this prevents finding dependent libraries that
- # are installed to the same prefix.
- # At present, this check doesn't affect windows .dll's that
- # are installed into $libdir/../bin (currently, that works fine)
- # but it's something to keep an eye on.
- if test "$inst_prefix_dir" = "$destdir"; then
- $echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2
- exit $EXIT_FAILURE
- fi
-
- if test -n "$inst_prefix_dir"; then
- # Stick the inst_prefix_dir data into the link command.
- relink_command=`$echo "$relink_command" | $SP2NL | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%" | $NL2SP`
- else
- relink_command=`$echo "$relink_command" | $SP2NL | $SED "s%@inst_prefix_dir@%%" | $NL2SP`
- fi
-
- $echo "$modename: warning: relinking \`$file'" 1>&2
- $show "$relink_command"
- if $run eval "$relink_command"; then :
- else
- $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
- exit $EXIT_FAILURE
- fi
- fi
-
- # See the names of the shared library.
- set dummy $library_names
- if test -n "$2"; then
- realname="$2"
- shift
- shift
-
- srcname="$realname"
- test -n "$relink_command" && srcname="$realname"T
-
- # Install the shared library and build the symlinks.
- $show "$install_prog $dir/$srcname $destdir/$realname"
- $run eval "$install_prog $dir/$srcname $destdir/$realname" || exit $?
- if test -n "$stripme" && test -n "$striplib"; then
- $show "$striplib $destdir/$realname"
- $run eval "$striplib $destdir/$realname" || exit $?
- fi
-
- if test "$#" -gt 0; then
- # Delete the old symlinks, and create new ones.
- # Try `ln -sf' first, because the `ln' binary might depend on
- # the symlink we replace! Solaris /bin/ln does not understand -f,
- # so we also need to try rm && ln -s.
- for linkname
- do
- if test "$linkname" != "$realname"; then
- $show "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })"
- $run eval "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })"
- fi
- done
- fi
-
- # Do each command in the postinstall commands.
- lib="$destdir/$realname"
- cmds=$postinstall_cmds
- save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- eval cmd=\"$cmd\"
- $show "$cmd"
- $run eval "$cmd" || {
- lt_exit=$?
-
- # Restore the uninstalled library and exit
- if test "$mode" = relink; then
- $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)'
- fi
-
- exit $lt_exit
- }
- done
- IFS="$save_ifs"
- fi
-
- # Install the pseudo-library for information purposes.
- name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
- instname="$dir/$name"i
- $show "$install_prog $instname $destdir/$name"
- $run eval "$install_prog $instname $destdir/$name" || exit $?
-
- # Maybe install the static library, too.
- test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
- ;;
-
- *.lo)
- # Install (i.e. copy) a libtool object.
-
- # Figure out destination file name, if it wasn't already specified.
- if test -n "$destname"; then
- destfile="$destdir/$destname"
- else
- destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
- destfile="$destdir/$destfile"
- fi
-
- # Deduce the name of the destination old-style object file.
- case $destfile in
- *.lo)
- staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"`
- ;;
- *.$objext)
- staticdest="$destfile"
- destfile=
- ;;
- *)
- $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
-
- # Install the libtool object if requested.
- if test -n "$destfile"; then
- $show "$install_prog $file $destfile"
- $run eval "$install_prog $file $destfile" || exit $?
- fi
-
- # Install the old object if enabled.
- if test "$build_old_libs" = yes; then
- # Deduce the name of the old-style object file.
- staticobj=`$echo "X$file" | $Xsed -e "$lo2o"`
-
- $show "$install_prog $staticobj $staticdest"
- $run eval "$install_prog \$staticobj \$staticdest" || exit $?
- fi
- exit $EXIT_SUCCESS
- ;;
-
- *)
- # Figure out destination file name, if it wasn't already specified.
- if test -n "$destname"; then
- destfile="$destdir/$destname"
- else
- destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
- destfile="$destdir/$destfile"
- fi
-
- # If the file is missing, and there is a .exe on the end, strip it
- # because it is most likely a libtool script we actually want to
- # install
- stripped_ext=""
- case $file in
- *.exe)
- if test ! -f "$file"; then
- file=`$echo $file|${SED} 's,.exe$,,'`
- stripped_ext=".exe"
- fi
- ;;
- esac
-
- # Do a test to see if this is really a libtool program.
- case $host in
- *cygwin*|*mingw*)
- wrapper=`$echo $file | ${SED} -e 's,.exe$,,'`
- ;;
- *)
- wrapper=$file
- ;;
- esac
- if (${SED} -e '4q' $wrapper | grep "^# Generated by .*$PACKAGE")>/dev/null 2>&1; then
- notinst_deplibs=
- relink_command=
-
- # Note that it is not necessary on cygwin/mingw to append a dot to
- # foo even if both foo and FILE.exe exist: automatic-append-.exe
- # behavior happens only for exec(3), not for open(2)! Also, sourcing
- # `FILE.' does not work on cygwin managed mounts.
- #
- # If there is no directory component, then add one.
- case $wrapper in
- */* | *\\*) . ${wrapper} ;;
- *) . ./${wrapper} ;;
- esac
-
- # Check the variables that should have been set.
- if test -z "$notinst_deplibs"; then
- $echo "$modename: invalid libtool wrapper script \`$wrapper'" 1>&2
- exit $EXIT_FAILURE
- fi
-
- finalize=yes
- for lib in $notinst_deplibs; do
- # Check to see that each library is installed.
- libdir=
- if test -f "$lib"; then
- # If there is no directory component, then add one.
- case $lib in
- */* | *\\*) . $lib ;;
- *) . ./$lib ;;
- esac
- fi
- libfile="$libdir/"`$echo "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test
- if test -n "$libdir" && test ! -f "$libfile"; then
- $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2
- finalize=no
- fi
- done
-
- relink_command=
- # Note that it is not necessary on cygwin/mingw to append a dot to
- # foo even if both foo and FILE.exe exist: automatic-append-.exe
- # behavior happens only for exec(3), not for open(2)! Also, sourcing
- # `FILE.' does not work on cygwin managed mounts.
- #
- # If there is no directory component, then add one.
- case $wrapper in
- */* | *\\*) . ${wrapper} ;;
- *) . ./${wrapper} ;;
- esac
-
- outputname=
- if test "$fast_install" = no && test -n "$relink_command"; then
- if test "$finalize" = yes && test -z "$run"; then
- tmpdir=`func_mktempdir`
- file=`$echo "X$file$stripped_ext" | $Xsed -e 's%^.*/%%'`
- outputname="$tmpdir/$file"
- # Replace the output file specification.
- relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g' | $NL2SP`
-
- $show "$relink_command"
- if $run eval "$relink_command"; then :
- else
- $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
- ${rm}r "$tmpdir"
- continue
- fi
- file="$outputname"
- else
- $echo "$modename: warning: cannot relink \`$file'" 1>&2
- fi
- else
- # Install the binary that we compiled earlier.
- file=`$echo "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
- fi
- fi
-
- # remove .exe since cygwin /usr/bin/install will append another
- # one anyway
- case $install_prog,$host in
- */usr/bin/install*,*cygwin*)
- case $file:$destfile in
- *.exe:*.exe)
- # this is ok
- ;;
- *.exe:*)
- destfile=$destfile.exe
- ;;
- *:*.exe)
- destfile=`$echo $destfile | ${SED} -e 's,.exe$,,'`
- ;;
- esac
- ;;
- esac
- $show "$install_prog$stripme $file $destfile"
- $run eval "$install_prog\$stripme \$file \$destfile" || exit $?
- test -n "$outputname" && ${rm}r "$tmpdir"
- ;;
- esac
- done
-
- for file in $staticlibs; do
- name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-
- # Set up the ranlib parameters.
- oldlib="$destdir/$name"
-
- $show "$install_prog $file $oldlib"
- $run eval "$install_prog \$file \$oldlib" || exit $?
-
- if test -n "$stripme" && test -n "$old_striplib"; then
- $show "$old_striplib $oldlib"
- $run eval "$old_striplib $oldlib" || exit $?
- fi
-
- # Do each command in the postinstall commands.
- cmds=$old_postinstall_cmds
- save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- eval cmd=\"$cmd\"
- $show "$cmd"
- $run eval "$cmd" || exit $?
- done
- IFS="$save_ifs"
- done
-
- if test -n "$future_libdirs"; then
- $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2
- fi
-
- if test -n "$current_libdirs"; then
- # Maybe just do a dry run.
- test -n "$run" && current_libdirs=" -n$current_libdirs"
- exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
- else
- exit $EXIT_SUCCESS
- fi
- ;;
-
- # libtool finish mode
- finish)
- modename="$modename: finish"
- libdirs="$nonopt"
- admincmds=
-
- if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
- for dir
- do
- libdirs="$libdirs $dir"
- done
-
- for libdir in $libdirs; do
- if test -n "$finish_cmds"; then
- # Do each command in the finish commands.
- cmds=$finish_cmds
- save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- eval cmd=\"$cmd\"
- $show "$cmd"
- $run eval "$cmd" || admincmds="$admincmds
- $cmd"
- done
- IFS="$save_ifs"
- fi
- if test -n "$finish_eval"; then
- # Do the single finish_eval.
- eval cmds=\"$finish_eval\"
- $run eval "$cmds" || admincmds="$admincmds
- $cmds"
- fi
- done
- fi
-
- # Exit here if they wanted silent mode.
- test "$show" = : && exit $EXIT_SUCCESS
-
- $echo "X----------------------------------------------------------------------" | $Xsed
- $echo "Libraries have been installed in:"
- for libdir in $libdirs; do
- $echo " $libdir"
- done
- $echo
- $echo "If you ever happen to want to link against installed libraries"
- $echo "in a given directory, LIBDIR, you must either use libtool, and"
- $echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
- $echo "flag during linking and do at least one of the following:"
- if test -n "$shlibpath_var"; then
- $echo " - add LIBDIR to the \`$shlibpath_var' environment variable"
- $echo " during execution"
- fi
- if test -n "$runpath_var"; then
- $echo " - add LIBDIR to the \`$runpath_var' environment variable"
- $echo " during linking"
- fi
- if test -n "$hardcode_libdir_flag_spec"; then
- libdir=LIBDIR
- eval flag=\"$hardcode_libdir_flag_spec\"
-
- $echo " - use the \`$flag' linker flag"
- fi
- if test -n "$admincmds"; then
- $echo " - have your system administrator run these commands:$admincmds"
- fi
- if test -f /etc/ld.so.conf; then
- $echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
- fi
- $echo
- $echo "See any operating system documentation about shared libraries for"
- $echo "more information, such as the ld(1) and ld.so(8) manual pages."
- $echo "X----------------------------------------------------------------------" | $Xsed
- exit $EXIT_SUCCESS
- ;;
-
- # libtool execute mode
- execute)
- modename="$modename: execute"
-
- # The first argument is the command name.
- cmd="$nonopt"
- if test -z "$cmd"; then
- $echo "$modename: you must specify a COMMAND" 1>&2
- $echo "$help"
- exit $EXIT_FAILURE
- fi
-
- # Handle -dlopen flags immediately.
- for file in $execute_dlfiles; do
- if test ! -f "$file"; then
- $echo "$modename: \`$file' is not a file" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
-
- dir=
- case $file in
- *.la)
- # Check to see that this really is a libtool archive.
- if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
- else
- $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
-
- # Read the libtool library.
- dlname=
- library_names=
-
- # If there is no directory component, then add one.
- case $file in
- */* | *\\*) . $file ;;
- *) . ./$file ;;
- esac
-
- # Skip this library if it cannot be dlopened.
- if test -z "$dlname"; then
- # Warn if it was a shared library.
- test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'"
- continue
- fi
-
- dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
- test "X$dir" = "X$file" && dir=.
-
- if test -f "$dir/$objdir/$dlname"; then
- dir="$dir/$objdir"
- else
- if test ! -f "$dir/$dlname"; then
- $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2
- exit $EXIT_FAILURE
- fi
- fi
- ;;
-
- *.lo)
- # Just add the directory containing the .lo file.
- dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
- test "X$dir" = "X$file" && dir=.
- ;;
-
- *)
- $echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2
- continue
- ;;
- esac
-
- # Get the absolute pathname.
- absdir=`cd "$dir" && pwd`
- test -n "$absdir" && dir="$absdir"
-
- # Now add the directory to shlibpath_var.
- if eval "test -z \"\$$shlibpath_var\""; then
- eval "$shlibpath_var=\"\$dir\""
- else
- eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
- fi
- done
-
- # This variable tells wrapper scripts just to set shlibpath_var
- # rather than running their programs.
- libtool_execute_magic="$magic"
-
- # Check if any of the arguments is a wrapper script.
- args=
- for file
- do
- case $file in
- -*) ;;
- *)
- # Do a test to see if this is really a libtool program.
- if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
- # If there is no directory component, then add one.
- case $file in
- */* | *\\*) . $file ;;
- *) . ./$file ;;
- esac
-
- # Transform arg to wrapped name.
- file="$progdir/$program"
- fi
- ;;
- esac
- # Quote arguments (to preserve shell metacharacters).
- file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"`
- args="$args \"$file\""
- done
-
- if test -z "$run"; then
- if test -n "$shlibpath_var"; then
- # Export the shlibpath_var.
- eval "export $shlibpath_var"
- fi
-
- # Restore saved environment variables
- for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
- do
- eval "if test \"\${save_$lt_var+set}\" = set; then
- $lt_var=\$save_$lt_var; export $lt_var
- fi"
- done
-
- # Now prepare to actually exec the command.
- exec_cmd="\$cmd$args"
- else
- # Display what would be done.
- if test -n "$shlibpath_var"; then
- eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\""
- $echo "export $shlibpath_var"
- fi
- $echo "$cmd$args"
- exit $EXIT_SUCCESS
- fi
- ;;
-
- # libtool clean and uninstall mode
- clean | uninstall)
- modename="$modename: $mode"
- rm="$nonopt"
- files=
rmforce=
exit_status=0
@@ -6595,44 +9505,41 @@
for arg
do
case $arg in
- -f) rm="$rm $arg"; rmforce=yes ;;
- -*) rm="$rm $arg" ;;
- *) files="$files $arg" ;;
+ -f) func_append RM " $arg"; rmforce=yes ;;
+ -*) func_append RM " $arg" ;;
+ *) func_append files " $arg" ;;
esac
done
- if test -z "$rm"; then
- $echo "$modename: you must specify an RM program" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
+ test -z "$RM" && \
+ func_fatal_help "you must specify an RM program"
rmdirs=
- origobjdir="$objdir"
for file in $files; do
- dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
- if test "X$dir" = "X$file"; then
- dir=.
- objdir="$origobjdir"
+ func_dirname "$file" "" "."
+ dir="$func_dirname_result"
+ if test "X$dir" = X.; then
+ odir="$objdir"
else
- objdir="$dir/$origobjdir"
+ odir="$dir/$objdir"
fi
- name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
- test "$mode" = uninstall && objdir="$dir"
+ func_basename "$file"
+ name="$func_basename_result"
+ test "$opt_mode" = uninstall && odir="$dir"
- # Remember objdir for removal later, being careful to avoid duplicates
- if test "$mode" = clean; then
+ # Remember odir for removal later, being careful to avoid duplicates
+ if test "$opt_mode" = clean; then
case " $rmdirs " in
- *" $objdir "*) ;;
- *) rmdirs="$rmdirs $objdir" ;;
+ *" $odir "*) ;;
+ *) func_append rmdirs " $odir" ;;
esac
fi
# Don't error if the file doesn't exist and rm -f was used.
- if (test -L "$file") >/dev/null 2>&1 \
- || (test -h "$file") >/dev/null 2>&1 \
- || test -f "$file"; then
+ if { test -L "$file"; } >/dev/null 2>&1 ||
+ { test -h "$file"; } >/dev/null 2>&1 ||
+ test -f "$file"; then
:
elif test -d "$file"; then
exit_status=1
@@ -6646,55 +9553,32 @@
case $name in
*.la)
# Possibly a libtool archive, so verify it.
- if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
- . $dir/$name
+ if func_lalib_p "$file"; then
+ func_source $dir/$name
# Delete the libtool libraries and symlinks.
for n in $library_names; do
- rmfiles="$rmfiles $objdir/$n"
+ func_append rmfiles " $odir/$n"
done
- test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library"
+ test -n "$old_library" && func_append rmfiles " $odir/$old_library"
- case "$mode" in
+ case "$opt_mode" in
clean)
- case " $library_names " in
- # " " in the beginning catches empty $dlname
+ case " $library_names " in
*" $dlname "*) ;;
- *) rmfiles="$rmfiles $objdir/$dlname" ;;
+ *) test -n "$dlname" && func_append rmfiles " $odir/$dlname" ;;
esac
- test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
+ test -n "$libdir" && func_append rmfiles " $odir/$name $odir/${name}i"
;;
uninstall)
if test -n "$library_names"; then
# Do each command in the postuninstall commands.
- cmds=$postuninstall_cmds
- save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- eval cmd=\"$cmd\"
- $show "$cmd"
- $run eval "$cmd"
- if test "$?" -ne 0 && test "$rmforce" != yes; then
- exit_status=1
- fi
- done
- IFS="$save_ifs"
+ func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
fi
if test -n "$old_library"; then
# Do each command in the old_postuninstall commands.
- cmds=$old_postuninstall_cmds
- save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- eval cmd=\"$cmd\"
- $show "$cmd"
- $run eval "$cmd"
- if test "$?" -ne 0 && test "$rmforce" != yes; then
- exit_status=1
- fi
- done
- IFS="$save_ifs"
+ func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
fi
# FIXME: should reinstall the best remaining shared library.
;;
@@ -6704,289 +9588,96 @@
*.lo)
# Possibly a libtool object, so verify it.
- if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+ if func_lalib_p "$file"; then
# Read the .lo file
- . $dir/$name
+ func_source $dir/$name
# Add PIC object to the list of files to remove.
- if test -n "$pic_object" \
- && test "$pic_object" != none; then
- rmfiles="$rmfiles $dir/$pic_object"
+ if test -n "$pic_object" &&
+ test "$pic_object" != none; then
+ func_append rmfiles " $dir/$pic_object"
fi
# Add non-PIC object to the list of files to remove.
- if test -n "$non_pic_object" \
- && test "$non_pic_object" != none; then
- rmfiles="$rmfiles $dir/$non_pic_object"
+ if test -n "$non_pic_object" &&
+ test "$non_pic_object" != none; then
+ func_append rmfiles " $dir/$non_pic_object"
fi
fi
;;
*)
- if test "$mode" = clean ; then
+ if test "$opt_mode" = clean ; then
noexename=$name
case $file in
*.exe)
- file=`$echo $file|${SED} 's,.exe$,,'`
- noexename=`$echo $name|${SED} 's,.exe$,,'`
+ func_stripname '' '.exe' "$file"
+ file=$func_stripname_result
+ func_stripname '' '.exe' "$name"
+ noexename=$func_stripname_result
# $file with .exe has already been added to rmfiles,
# add $file without .exe
- rmfiles="$rmfiles $file"
+ func_append rmfiles " $file"
;;
esac
# Do a test to see if this is a libtool program.
- if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
- relink_command=
- . $dir/$noexename
+ if func_ltwrapper_p "$file"; then
+ if func_ltwrapper_executable_p "$file"; then
+ func_ltwrapper_scriptname "$file"
+ relink_command=
+ func_source $func_ltwrapper_scriptname_result
+ func_append rmfiles " $func_ltwrapper_scriptname_result"
+ else
+ relink_command=
+ func_source $dir/$noexename
+ fi
# note $name still contains .exe if it was in $file originally
# as does the version of $file that was added into $rmfiles
- rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}"
+ func_append rmfiles " $odir/$name $odir/${name}S.${objext}"
if test "$fast_install" = yes && test -n "$relink_command"; then
- rmfiles="$rmfiles $objdir/lt-$name"
+ func_append rmfiles " $odir/lt-$name"
fi
if test "X$noexename" != "X$name" ; then
- rmfiles="$rmfiles $objdir/lt-${noexename}.c"
+ func_append rmfiles " $odir/lt-${noexename}.c"
fi
fi
fi
;;
esac
- $show "$rm $rmfiles"
- $run $rm $rmfiles || exit_status=1
+ func_show_eval "$RM $rmfiles" 'exit_status=1'
done
- objdir="$origobjdir"
# Try to remove the ${objdir}s in the directories where we deleted files
for dir in $rmdirs; do
if test -d "$dir"; then
- $show "rmdir $dir"
- $run rmdir $dir >/dev/null 2>&1
+ func_show_eval "rmdir $dir >/dev/null 2>&1"
fi
done
exit $exit_status
- ;;
+}
- "")
- $echo "$modename: you must specify a MODE" 1>&2
- $echo "$generic_help" 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
+{ test "$opt_mode" = uninstall || test "$opt_mode" = clean; } &&
+ func_mode_uninstall ${1+"$@"}
- if test -z "$exec_cmd"; then
- $echo "$modename: invalid operation mode \`$mode'" 1>&2
- $echo "$generic_help" 1>&2
- exit $EXIT_FAILURE
- fi
-fi # test -z "$show_help"
+test -z "$opt_mode" && {
+ help="$generic_help"
+ func_fatal_help "you must specify a MODE"
+}
+test -z "$exec_cmd" && \
+ func_fatal_help "invalid operation mode \`$opt_mode'"
+
if test -n "$exec_cmd"; then
- eval exec $exec_cmd
+ eval exec "$exec_cmd"
exit $EXIT_FAILURE
fi
-# We need to display help for each of the modes.
-case $mode in
-"") $echo \
-"Usage: $modename [OPTION]... [MODE-ARG]...
+exit $exit_status
-Provide generalized library-building support services.
- --config show all configuration variables
- --debug enable verbose shell tracing
--n, --dry-run display commands without modifying any files
- --features display basic configuration information and exit
- --finish same as \`--mode=finish'
- --help display this help message and exit
- --mode=MODE use operation mode MODE [default=inferred from MODE-ARGS]
- --quiet same as \`--silent'
- --silent don't print informational messages
- --tag=TAG use configuration variables from tag TAG
- --version print version information
-
-MODE must be one of the following:
-
- clean remove files from the build directory
- compile compile a source file into a libtool object
- execute automatically set library path, then run a program
- finish complete the installation of libtool libraries
- install install libraries or executables
- link create a library or an executable
- uninstall remove libraries from an installed directory
-
-MODE-ARGS vary depending on the MODE. Try \`$modename --help --mode=MODE' for
-a more detailed description of MODE.
-
-Report bugs to <bug-libtool at gnu.org>."
- exit $EXIT_SUCCESS
- ;;
-
-clean)
- $echo \
-"Usage: $modename [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
-
-Remove files from the build directory.
-
-RM is the name of the program to use to delete files associated with each FILE
-(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
-to RM.
-
-If FILE is a libtool library, object or program, all the files associated
-with it are deleted. Otherwise, only FILE itself is deleted using RM."
- ;;
-
-compile)
- $echo \
-"Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
-
-Compile a source file into a libtool library object.
-
-This mode accepts the following additional options:
-
- -o OUTPUT-FILE set the output file name to OUTPUT-FILE
- -prefer-pic try to building PIC objects only
- -prefer-non-pic try to building non-PIC objects only
- -static always build a \`.o' file suitable for static linking
-
-COMPILE-COMMAND is a command to be used in creating a \`standard' object file
-from the given SOURCEFILE.
-
-The output file name is determined by removing the directory component from
-SOURCEFILE, then substituting the C source code suffix \`.c' with the
-library object suffix, \`.lo'."
- ;;
-
-execute)
- $echo \
-"Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]...
-
-Automatically set library path, then run a program.
-
-This mode accepts the following additional options:
-
- -dlopen FILE add the directory containing FILE to the library path
-
-This mode sets the library path environment variable according to \`-dlopen'
-flags.
-
-If any of the ARGS are libtool executable wrappers, then they are translated
-into their corresponding uninstalled binary, and any of their required library
-directories are added to the library path.
-
-Then, COMMAND is executed, with ARGS as arguments."
- ;;
-
-finish)
- $echo \
-"Usage: $modename [OPTION]... --mode=finish [LIBDIR]...
-
-Complete the installation of libtool libraries.
-
-Each LIBDIR is a directory that contains libtool libraries.
-
-The commands that this mode executes may require superuser privileges. Use
-the \`--dry-run' option if you just want to see what would be executed."
- ;;
-
-install)
- $echo \
-"Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND...
-
-Install executables or libraries.
-
-INSTALL-COMMAND is the installation command. The first component should be
-either the \`install' or \`cp' program.
-
-The rest of the components are interpreted as arguments to that command (only
-BSD-compatible install options are recognized)."
- ;;
-
-link)
- $echo \
-"Usage: $modename [OPTION]... --mode=link LINK-COMMAND...
-
-Link object files or libraries together to form another library, or to
-create an executable program.
-
-LINK-COMMAND is a command using the C compiler that you would use to create
-a program from several object files.
-
-The following components of LINK-COMMAND are treated specially:
-
- -all-static do not do any dynamic linking at all
- -avoid-version do not add a version suffix if possible
- -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime
- -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols
- -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
- -export-symbols SYMFILE
- try to export only the symbols listed in SYMFILE
- -export-symbols-regex REGEX
- try to export only the symbols matching REGEX
- -LLIBDIR search LIBDIR for required installed libraries
- -lNAME OUTPUT-FILE requires the installed library libNAME
- -module build a library that can dlopened
- -no-fast-install disable the fast-install mode
- -no-install link a not-installable executable
- -no-undefined declare that a library does not refer to external symbols
- -o OUTPUT-FILE create OUTPUT-FILE from the specified objects
- -objectlist FILE Use a list of object files found in FILE to specify objects
- -precious-files-regex REGEX
- don't remove output files matching REGEX
- -release RELEASE specify package release information
- -rpath LIBDIR the created library will eventually be installed in LIBDIR
- -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries
- -static do not do any dynamic linking of uninstalled libtool libraries
- -static-libtool-libs
- do not do any dynamic linking of libtool libraries
- -version-info CURRENT[:REVISION[:AGE]]
- specify library version info [each variable defaults to 0]
-
-All other options (arguments beginning with \`-') are ignored.
-
-Every other argument is treated as a filename. Files ending in \`.la' are
-treated as uninstalled libtool libraries, other files are standard or library
-object files.
-
-If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
-only library objects (\`.lo' files) may be specified, and \`-rpath' is
-required, except when creating a convenience library.
-
-If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
-using \`ar' and \`ranlib', or on Windows using \`lib'.
-
-If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
-is created, otherwise an executable program is created."
- ;;
-
-uninstall)
- $echo \
-"Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
-
-Remove libraries from an installation directory.
-
-RM is the name of the program to use to delete files associated with each FILE
-(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
-to RM.
-
-If FILE is a libtool library, all the files associated with it are deleted.
-Otherwise, only FILE itself is deleted using RM."
- ;;
-
-*)
- $echo "$modename: invalid operation mode \`$mode'" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- ;;
-esac
-
-$echo
-$echo "Try \`$modename --help' for more information about other modes."
-
-exit $?
-
# The TAGs below are defined such that we never get into a situation
# in which we disable both kinds of libraries. Given conflicting
# choices, we go for a static library, that is the most portable,
@@ -6999,11 +9690,12 @@
# configuration. But we'll never go from static-only to shared-only.
# ### BEGIN LIBTOOL TAG CONFIG: disable-shared
-disable_libs=shared
+build_libtool_libs=no
+build_old_libs=yes
# ### END LIBTOOL TAG CONFIG: disable-shared
# ### BEGIN LIBTOOL TAG CONFIG: disable-static
-disable_libs=static
+build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
# ### END LIBTOOL TAG CONFIG: disable-static
# Local Variables:
@@ -7010,3 +9702,5 @@
# mode:shell-script
# sh-indentation:2
# End:
+# vi:sw=2
+
More information about the Midnightbsd-cvs
mailing list