[Midnightbsd-cvs] src [9203] sync up

laffer1 at midnightbsd.org laffer1 at midnightbsd.org
Thu Nov 3 08:22:00 EDT 2016


Revision: 9203
          http://svnweb.midnightbsd.org/src/?rev=9203
Author:   laffer1
Date:     2016-11-03 08:22:00 -0400 (Thu, 03 Nov 2016)
Log Message:
-----------
sync up

Modified Paths:
--------------
    vendor/bind/dist/CHANGES
    vendor/bind/dist/COPYRIGHT
    vendor/bind/dist/FAQ.xml
    vendor/bind/dist/Makefile.in
    vendor/bind/dist/README
    vendor/bind/dist/acconfig.h
    vendor/bind/dist/bind.keys
    vendor/bind/dist/config.guess
    vendor/bind/dist/config.sub
    vendor/bind/dist/configure.in
    vendor/bind/dist/isc-config.sh.1
    vendor/bind/dist/isc-config.sh.docbook
    vendor/bind/dist/isc-config.sh.html
    vendor/bind/dist/isc-config.sh.in
    vendor/bind/dist/mkinstalldirs

Removed Paths:
-------------
    vendor/bind/dist/aclocal.m4
    vendor/bind/dist/config.h.in
    vendor/bind/dist/config.h.win32
    vendor/bind/dist/configure

Property Changed:
----------------
    vendor/bind/dist/mkinstalldirs

Modified: vendor/bind/dist/CHANGES
===================================================================
--- vendor/bind/dist/CHANGES	2016-11-03 12:21:01 UTC (rev 9202)
+++ vendor/bind/dist/CHANGES	2016-11-03 12:22:00 UTC (rev 9203)
@@ -1,14 +1,655 @@
-	--- 9.8.5-P2 released ---
+	--- 9.8.8 released ---
 
+	--- 9.8.8rc2 released ---
+
+3947.	[cleanup]	Set the executable bit on libraries when using
+			libtool. [RT #36786]
+
+3945.	[bug]		Invalid wildcard expansions could be incorrectly
+			accepted by the validator. [RT #37093]
+
+3944.	[test]		Added a regression test for "server-id". [RT #37057]
+
+3942.	[bug]		Wildcard responses from a optout range should be
+			marked as insecure. [RT #37072]
+
+3941.	[doc]		Include the BIND version number in the ARM. [RT #37067]
+
+	--- 9.8.8rc1 released ---
+
+3933.	[bug]		Corrected the implementation of dns_rdata_casecompare()
+			for the HIP rdata type.  [RT #36911]
+
+3932.	[test]		Improved named-checkconf tests. [RT #36911]
+
+3931.	[cleanup]	Cleanup how dlz grammar is defined. [RT #36879]
+
+3929.	[bug]		'host -a' needed to clear idnoptions. [RT #36963]
+
+3928.	[test]		Improve rndc system test. [RT #36898]
+
+3925.	[bug]		DS lookup of RFC 1918 empty zones failed. [RT #36917]
+
+3924.	[bug]		Improve 'rndc addzone' error reporting. [RT #35187]
+
+3923.	[bug]		Sanity check the xml2-config output. [RT #22246]
+
+3922.	[bug]		When resigning, dnssec-signzone was removing
+			all signatures from delegation nodes. It now
+			retains	DS and (if applicable) NSEC signatures.
+			[RT #36946]
+
+3921.	[bug]		AD was inappropriately set on RPZ responses. [RT #36833]
+
+3919.	[bug]		dig: continue to next line if a address lookup fails
+			in batch mode. [RT #36755]
+
+3918.	[doc]		Update check-spf documentation. [RT #36910]
+
+3917.	[bug]		dig, nslookup and host now continue on names that are
+			too long after applying a search list elements.
+			[RT #36892]
+
+3916.	[contrib]	zone2sqlite checked wrong result code.  Address
+			compiler warnings. [RT #36931]
+
+	--- 9.8.8b2 released ---
+
+3914.	[bug]		Allow the URI target and CAA value fields to
+			be zero length. [RT #36737]
+
+3913.	[bug]		Address race issue in dispatch. [RT #36731]
+
+3910.	[bug]		Fix races to free event during shutdown. [RT #36720]
+
+3909.	[bug]		When computing the number of elements required for a
+			acl count_acl_elements could have a short count leading
+			to a assertion failure.  Also zero out new acl elements
+			in dns_acl_merge.  [RT #36675]
+
+3908.	[bug]		rndc now differentiates between a zone in multiple
+			views and a zone that doesn't exist at all. [RT #36691]
+
+3907.	[cleanup]	Alphabetize rndc help. [RT #36683]
+
+3906.	[protocol]	Update URI record format to comply with
+			draft-faltstrom-uri-08. [RT #36642]
+
+3905.	[bug]		Address deadlock between view.c and adb.c. [RT #36341]
+
+3904.	[func]		Add the RPZ SOA to the additional section. [RT36507]
+
+3903.	[bug]		Improve the accuracy of DiG's reported round trip
+			time. [RT 36611]
+
+3902.	[bug]		liblwres wasn't handling link-local addresses in
+			nameserver clauses in resolv.conf. [RT #36039]
+
+3901.	[protocol]	Added support for CAA record type (RFC 6844).
+			[RT #36625]
+
+3900.	[bug]		Fix a crash in PostgreSQL DLZ driver. [RT #36637]
+
+3899.	[bug]		"request-ixfr" is only applicable to slave and redirect
+			zones. [RT #36608]
+
+3898.	[bug]		Too small a buffer in tohexstr() calls in test code.
+			[RT #36598]
+
+3894.	[bug]		Buffers in isc_print_vsnprintf were not properly
+			initialized leading to potential overflows when
+			printing out quad values. [RT #36505]
+
+3892.	[bug]		Setting '-t aaaa' in .digrc had unintended side
+			effects. [RT #36452]
+
+3890.	[bug]		RRSIG sets that were not loaded in a single transaction
+			at start up where not being correctly added to
+			re-signing heaps.  [RT #36302]
+
+3889.	[port]		hurd: configure fixes as per:
+			https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=746540
+
+3887.	[cleanup]	Make all static symbols in rbtdb64 end in "64" so
+			they are easier to use in a debugger. [RT #36373]
+
+	--- 9.8.8b1 released ---
+
+3884.	[protocol]	Add CDS and CDNSKEY record types. [RT #36333]
+
+3881.	[bug]		Address memory leak with UPDATE error handling.
+			[RT #36303]
+
+3880.	[test]		Update ans.pl to work with new TSIG support in
+			Net::DNS; add additional Net::DNS version prerequisite
+			checks. [RT #36327]
+
+3878.	[bug]		Using the incorrect filename for a DLZ module
+			caused a segmentation fault on startup. [RT #36286]
+
+3874.	[test]		Check that only "check-names master" is needed for
+			updates to be accepted.
+
+3873.	[protocol]	Only warn for SPF without TXT spf record. [RT #36210]
+
+3872.	[bug]		Address issues found by static analysis. [RT #36209]
+
+3871.	[bug]		Don't publish an activated key automatically before
+			its publish time. [RT #35063]
+
+3868.	[bug]		isc_mem_setwater incorrectly cleared hi_called
+			potentially leaving over memory cleaner running.
+			[RT #35270]
+
+3866.	[bug]		Named could die on disk full in generate_session_key.
+			[RT #36119]
+
+3864.	[bug]		RPZ didn't work well when being used as forwarder.
+			[RT #36060]
+
+3862.	[cleanup]	Return immediately if we are not going to log the
+			message in ns_client_dumpmessage.
+
+3861.	[bug]		Benign missing isc_buffer_availablelength check in
+			dns_message_pseudosectiontotext.  [RT #36078]
+
+3860.	[bug]		ioctl(DP_POLL) array size needs to be determined
+			at run time as it is limited to {OPEN_MAX}.
+			[RT #35878]
+
+3858.	[bug]		Disable GCC 4.9 "delete null pointer check".
+			[RT #35968]
+
+3857.	[bug]		Make it harder for a incorrect NOEDNS classification
+			to be made. [RT #36020]
+
+3855.	[bug]		Limit smoothed round trip time aging to no more than
+			once a second. [RT #32909]
+
+3854.	[cleanup]	Report unrecognized options, if any, in the final
+			configure summary. [RT #36014]
+
+3853.	[cleanup]	Refactor dns_rdataslab_fromrdataset to separate out
+			the handling of a rdataset with no records. [RT #35968]
+
+3849.	[doc]		Alphabetized dig's +options. [RT #35992]
+
+3847.	[bug]		'configure --with-dlz-postgres' failed to fail when
+			there is not support available.
+
+3846.	[bug]		"dig +notcp ixfr=<serial>" should result in a UDP
+			ixfr query. [RT #35980]
+
+3844.	[bug]		Use the x64 version of the Microsoft Visual C++
+			Redistributable when built for 64 bit Windows.
+			[RT #35973]
+
+3843.	[protocol]	Check EDNS EXPIRE option in dns_rdata_fromwire.
+			[RT #35969]
+
+3841.	[cleanup]	Refactor zone.c:add_opt to use dns_message_buildopt.
+			[RT #35924]
+
+3840.	[port]		Check for arc4random_addrandom() before using it;
+			it's been removed from OpenBSD 5.5. [RT #35907]
+
+3839.	[test]		Use only posix-compatible shell in system tests.
+			[RT #35625]
+
+3838.	[protocol]	EDNS EXPIRE as been assigned a code point of 9.
+
+3836.	[bug]		Address C++ keyword usage in header file.
+
+3834.	[bug]		The re-signing heaps were not being updated soon enough
+			leading to multiple re-generations of the same RRSIG
+			when a zone transfer was in progress. [RT #35273]
+
+3833.	[bug]		Cross compiling was broken due to calling genrandom at
+			build time. [RT #35869]
+
+3826.	[bug]		Corrected bad INSIST logic in isc_radix_remove().
+			[RT #35870]
+
+3825.	[bug]		Address sign extension bug in isc_regex_validate.
+			[RT #35758]
+
+3824.	[bug]		A collision between two flag values could cause
+			problems with cache cleaning. [RT #35858]
+
+3822.	[bug]		Log the correct type of static-stub zones when
+			removing them. [RT #35842]
+
+3819.	[bug]		NSEC3 hashes need to be able to be entered and
+			displayed without padding.  This is not a issue for
+			currently defined algorithms but may be for future
+			hash algorithms. [RT #27925]
+
+3818.	[bug]		Stop lying to the optimizer that 'void *arg' is a
+			constant in isc_event_allocate.
+
+3815.	[doc]		Clarify "nsupdate -y" usage in man page. [RT #35808]
+
+3809.	[doc]		Fix NSID documentation.
+
+3807.	[bug]		Fix sign extension bug in dns_name_fromtext when
+			lowercase is set. [RT #35743]
+
+3806.	[test]		Improved system test portability. [RT #35625]
+
+3805.	[contrib]	Added contrib/perftcpdns, a performance testing tool
+			for DNS over TCP. [RT #35710]
+
+3803.	[bug]		"named-checkconf -z" incorrectly rejected zones
+			using alternate data sources for not having a "file"
+			option. [RT #35685]
+
+3802.	[bug]		Various header files were not being installed.
+
+3801.	[port]		Fix probing for gssapi support on FreeBSD. [RT #35615]
+
+3799.	[bug]		Improve named's command line error reporting.
+			[RT #35603]
+
+3796.	[bug]		Register dns error codes. [RT #35629]
+
+3795.	[bug]		Make named-checkconf detect raw masterfiles for
+			hint zones and reject them. [RT #35268]
+
+3794.	[maint]		Added AAAA for C.ROOT-SERVERS.NET.
+
+3791.	[bug]		solaris: remove extraneous return. [RT #35589]
+
+3787.	[bug]		The code that checks whether "auto-dnssec" is
+			allowed was ignoring "allow-update" ACLs set at
+			the options or view level. [RT #29536]
+
+3780.	[bug]		$GENERATE handled negative numbers incorrectly.
+			[RT #25528]
+
+3779.	[cleanup]	Clarify the error message when using an option
+			that was not enabled at compile time. [RT #35504]
+
+3778.	[bug]		Log a warning when the wrong address family is
+			used in "listen-on" or "listen-on-v6". [RT #17848]
+
+3775.	[bug]		dlz_dlopen driver could return the wrong error
+			code on API version mismatch, leading to a segfault.
+			[RT #35495]
+
+3773.	[func]		"host", "nslookup" and "nsupdate" now have
+			options to print the version number and exit.
+			[RT #26057]
+
+3770.	[bug]		"dig +trace" could fail with an assertion when it
+			needed to fall back to TCP due to a truncated
+			response. [RT #24660]
+
+3767.	[func]		Log explicitly when using rndc.key to configure
+			command channel. [RT #35316]
+
+3765.	[bug]		Fixed a bug in "rndc secroots" that could crash
+			named when dumping an empty keynode. [RT #35469]
+
+3764.	[bug]		The dnssec-keygen/settime -S and -i options
+			(to set up a successor key and set the prepublication
+			interval) were missing from dnssec-keyfromlabel.
+			[RT #35394]
+
+3761.	[bug]		Address dangling reference bug in dns_keytable_add.
+			[RT #35471]
+
+3756.	[bug]		GSSAPI Kerberos realm checking was broken in
+			check_config leading to spurious messages being
+			logged.  [RT #35443]
+
+3754.	[cleanup]	win32: Installer now places files in the
+			Program Files area rather than system services.
+			[RT #35361]
+
+3753.	[bug]		allow-notify was ignoring keys. [RT #35425]
+
+3747.	[bug]		A race condition could lead to a core dump when
+			destroying a resolver fetch object. [RT #35385]
+
+3743.	[bug]		delegation-only flag wasn't working in forward zone
+			declarations despite being documented.  This is
+			needed to support turning off forwarding and turning
+			on delegation only at the same name.  [RT #35392]
+
+3742.	[port]		linux: libcap support: declare curval at start of
+			block. [RT #35387]
+
+3740.	[contrib]	Minor fixes to configure --with-dlz-bdb,
+			--with-dlz-postgres and --with-dlz-odbc. [RT #35340]
+
+3736.	[bug]		nsupdate: When specifying a server by name,
+			fall back to alternate addresses if the first
+			address for that name is not reachable. [RT #25784]
+
+3734.	[bug]		Improve building with libtool. [RT #35314]
+
+3732.	[contrib]	Fixed a type mismatch causing the ODBC DLZ
+			driver to dump core on 64-bit systems. [RT #35324]
+
+3731.	[func]		Added a "no-case-compress" ACL, which causes
+			named to use case-insensitive compression
+			(disabling change #3645) for specified
+			clients. (This is useful when dealing
+			with broken client implementations that
+			use case-sensitive name comparisons,
+			rejecting responses that fail to match the
+			capitalization of the query that was sent.)
+			[RT #35300]
+
+3730.	[cleanup]	Added "never" as a synonym for "none" when
+			configuring key event dates in the dnssec tools.
+			[RT #35277]
+
+3729.	[bug]		dnssec-keygen could set the publication date
+			incorrectly when only the activation date was
+			specified on the command line. [RT #35278]
+
+3724.	[bug]		win32: Fixed a bug that prevented dig and
+			host from exiting properly after completing
+			a UDP query. [RT #35288]
+
+3720.	[bug]		Address compiler warnings. [RT #35261]
+
+3719.	[bug]		Address memory leak in in peer.c. [RT #35255]
+
+3718.	[bug]		A missing ISC_LINK_INIT in log.c. [RT #35260]
+
+3714.	[test]		System tests that need to test for cryptography
+			support before running can now use a common
+			"testcrypto.sh" script to do so. [RT #35213]
+
+	--- 9.8.7 released ---
+
+	--- 9.8.7rc2 released ---
+
+3710.	[bug]		Address double dns_zone_detach when switching to
+			using automatic empty zones from regular zones.
+			[RT #35177]
+
+3707.	[bug]		irs_resconf_load now returns ISC_R_FILENOTFOUND
+			on a missing resolv.conf file and initializes the
+			structure as if it had been configured with:
+
+				nameserver ::1
+				nameserver 127.0.0.1
+
+			Note: Callers will need to be updated to treat
+			ISC_R_FILENOTFOUND as a qualified success or else
+			they will leak memory. The following code fragment
+			will work with both old and new versions without
+			changing the behaviour of the existing code.
+
+			resconf = NULL;
+			result = irs_resconf_load(mctx, "/etc/resolv.conf",
+						  &resconf);
+			if (result != ISC_SUCCESS) {
+				if (resconf != NULL)
+					irs_resconf_destroy(&resconf);
+				....
+			}
+
+			[RT #35194]
+
+3706.	[contrib]	queryperf: Fixed a possible integer overflow when
+			printing results. [RT #35182]
+
+3704.	[protocol]	Accept integer timestamps in RRSIG records. [RT #35185]
+
+	--- 9.8.7rc1 released ---
+
+3701.	[func]		named-checkconf can now suppress the printing of
+			shared secrets by specifying '-x'. [RT #34465]
+
+3698.	[cleanup]	Replaced all uses of memcpy() with memmove().
+			[RT #35120]
+
+3697.	[bug]		Handle "." as a search list element when IDN support
+			is enabled. [RT #35133]
+
+3696.	[bug]		dig failed to handle AXFR style IXFR responses which
+			span multiple messages. [RT #35137]
+
+3695.	[bug]		Address a possible race in dispatch.c. [RT #35107]
+
+3694.	[bug]		Warn when a key-directory is configured for a zone,
+			but does not exist or is not a directory. [RT #35108]
+
+3693.	[security]	memcpy was incorrectly called with overlapping
+			ranges resulting in malformed names being generated
+			on some platforms.  This could cause INSIST failures
+			when serving NSEC3 signed zones (CVE-2014-0591).
+			[RT #35120]
+
+3692.	[bug]		Two calls to dns_db_getoriginnode were fatal if there
+			was no data at the node. [RT #35080]
+
+3689.	[bug]		Fixed a bug causing an insecure delegation from one
+			static-stub zone to another to fail with a broken
+			trust chain. [RT #35081]
+
+	--- 9.8.7b1 released ---
+
+3688.	[bug]		loadnode could return a freed node on out of memory.
+			[RT #35106]
+
+3683.	[cleanup]	Add a more detailed "not found" message to rndc
+			commands which specify a zone name. [RT #35059]
+
+3681.	[port]		Update the Windows build system to support feature
+			selection and WIN64 builds.  This is a work in
+			progress. [RT #34160]
+
+3679.	[bug]		dig could fail to clean up TCP sockets still
+			waiting on connect(). [RT #35074]
+
+3678.	[port]		Update config.guess and config.sub. [RT #35060]
+
+3677.	[bug]		'nsupdate' leaked memory if 'realm' was used multiple
+			times.  [RT #35073]
+
+3676.	[bug]		"named-checkconf -z" now checks zones of type
+			hint as well as master. [RT #35046]
+
+3675.	[misc]		Provide a place for third parties to add version
+			information for their extensions in the version
+			file by setting the EXTENSIONS variable.
+
+3670.	[bug]		Address read after free in server side of
+			lwres_getrrsetbyname. [RT #29075]
+
+3669.	[port]		freebsd: --with-gssapi needs -lhx509. [RT #35001]
+
+3668.	[bug]		Fix cast in lex.c which could see 0xff treated as eof.
+			[RT #34993]
+3667.	[test]		dig: add support to keep the TCP socket open between
+			successive queries (+[no]keepopen).  [RT #34918]
+
+3664.	[bug]		Updated OpenSSL PKCS#11 patches to fix active list
+			locking and other bugs. [RT #34855]
+
+3663.	[bug]		Address bugs in dns_rdata_fromstruct and
+			dns_rdata_tostruct for WKS and ISDN types. [RT #34910]
+
+3662.	[bug]		'host' could die if a UDP query timed out. [RT #34870]
+
+3660.	[cleanup]	Changed the name of "isc-config.sh" to "bind9-config".
+			[RT #23825]
+
+3658.	[port]		linux: Address platform specific compilation issue
+			when libcap-devel is installed. [RT #34838]
+
+3656.	[security]	Treat an all zero netmask as invalid when generating
+			the localnets acl. (The prior behavior could
+			allow unexpected matches when using some versions
+			of Winsock: CVE-2013-6320.) [RT #34687]
+
+3655.	[cleanup]	Simplify TCP message processing when requesting a
+			zone transfer.  [RT #34825]
+
+3654.	[bug]		Address race condition with manual notify requests.
+			[RT #34806]
+
+3653.	[func]		Create delegations for all "children" of empty zones
+			except "forward first". [RT #34826]
+
+3651.	[tuning]	Adjust when a master server is deemed unreachable.
+			[RT #27075]
+
+3650.	[tuning]	Use separate rate limiting queues for refresh and
+			notify requests. [RT #30589]
+
+3649.	[cleanup]	Include a comment in .nzf files, giving the name of
+			the associated view. [RT #34765]
+
+3648.	[test]		Updated the ATF test framework to version 0.17.
+			[RT #25627]
+
+3646.	[bug]		Journal filename string could be set incorrectly,
+			causing garbage in log messages. [RT #34738]
+
+3645.	[protocol]	Use case sensitive compression when responding to
+			queries. [RT #34737]
+
+3644.	[protocol]	Check that EDNS subnet client options are well formed.
+			[RT #34718]
+
+3641.	[bug]		Handle changes to sig-validity-interval settings
+			better. [RT #34625]
+
+3640.	[bug]		ndots was not being checked when searching.  Only
+			continue searching on NXDOMAIN responses.  Add the
+			ability to specify ndots to nslookup. [RT #34711]
+
+3639.	[bug]		Treat type 65533 (KEYDATA) as opaque except when used
+			in a key zone. [RT #34238]
+
+	--- 9.8.6 released ---
+
+3638.	[cleanup]	Add the ability to handle ENOPROTOOPT in case it is
+			encountered. [RT #34668]
+
+	--- 9.8.6rc2 released ---
+
+3637.	[bug]		'allow-query-on' was checking the source address
+			rather than the destination address. [RT #34590]
+
+3636.	[bug]		Automatic empty zones now behave better with
+			forward only "zones" beneath them. [RT #34583]
+
+3635.	[bug]		Signatures were not being removed from a zone with
+			only KSK keys for a algorithm. [RT #34439]
+
+3634.	[func]		Report build-id in rndc status. Report build-id
+			when building from a git repository. [RT #20422]
+
+3633.	[cleanup]	Refactor OPT processing in named to make it easier
+			to support new EDNS options. [RT #34414]
+
+3632.	[bug]		Signature from newly inactive keys were not being
+			removed. [RT #32178]
+
+3631.	[bug]		Remove spurious warning about missing signatures when
+			qtype is SIG. [RT #34600]
+
+3630.	[bug]		Ensure correct ID computation for MD5 keys. [RT #33033]
+
+3627.	[bug]		RPZ changes were not effective on slaves. [RT #34450]
+
+3625.	[bug]		Don't send notify messages to machines outside of the
+			test setup.
+
+	--- 9.8.6rc1 released ---
+
 3621.	[security]	Incorrect bounds checking on private type 'keydata'
 			can lead to a remotely triggerable REQUIRE failure
 			(CVE-2013-4854). [RT #34238]
 
-	--- 9.8.5-P1 released ---
+3615.	[cleanup]	"configure" now finishes by printing a summary
+			of optional BIND features and whether they are
+			active or inactive. ("configure --enable-full-report"
+			increases the verbosity of the summary.) [RT #31777]
 
+3614.	[port]		Check for <linux/types.h>. [RT #34162]
+
+3611.	[bug]		Improved resistance to a theoretical authentication
+			attack based on differential timing.  [RT #33939]
+
+3610.	[cleanup]	win32: Some executables had been omitted from the
+			installer. [RT #34116]
+
+3608.	[port]		win32: added todos.pl script to ensure all text files
+			the win32 build depends on are converted to DOS
+			newline format. [RT #22067]
+
+3607.	[bug]		dnssec-keygen had broken 'Invalid keyfile' error
+			message. [RT #34045]
+
+	--- 9.8.6b1 released ---
+
+3605.	[port]		win32: Addressed several compatibility issues
+			with newer versions of Visual Studio. [RT #33916]
+
+3603.	[bug]		Install <isc/stat.h>. [RT #33956]
+
+3601.	[bug]		Added to PKCS#11 openssl patches a value len
+			attribute in DH derive key. [RT #33928]
+
+3600.	[cleanup]	dig: Fixed a typo in the warning output when receiving
+			an oversized response. [RT #33910]
+
+3599.	[tuning]	Check for pointer equivalence in name comparisons.
+			[RT #18125]
+
+3594.	[maint]		Update config.guess and config.sub. [RT #33816]
+
+3592.	[doc]		Moved documentation of rndc command options to the
+			rndc man page. [RT #33506]
+
+3588.	[bug]		dig: addressed a memory leak in the sigchase code
+			that could cause a shutdown crash.  [RT #33733]
+
+3587.	[func]		'named -g' now checks the logging configuration but
+			does not use it. [RT #33473]
+
+3586.	[bug]		Handle errors in xmlDocDumpFormatMemoryEnc. [RT #33706]
+
 3584.	[security]	Caching data from an incompletely signed zone could
-			trigger an assertion failure in resolver.c [RT #33690]
+			trigger an assertion failure in resolver.c
+			(CVE-2013-3919). [RT #33690]
 
+3583.	[bug]		Address memory leak in GSS-API processing [RT #33574]
+
+3581.	[bug]		Changed the tcp-listen-queue default to 10. [RT #33029]
+
+3580.	[bug]		Addressed a possible race in acache.c [RT #33602]
+
+3579.	[maint]		Updates to PKCS#11 openssl patches, supporting
+			versions 0.9.8y, 1.0.0k, 1.0.1e [RT #33463]
+
+3578.	[bug]		'rndc -c file' now fails if 'file' does not exist.
+			[RT #33571]
+
+3577.	[bug]		Handle zero TTL values better. [RT #33411]
+
+3576.	[bug]		Address a shutdown race when validating. [RT #33573]
+
+3574.	[doc]		The 'hostname' keyword was missing from server-id
+			description in the named.conf man page. [RT #33476]
+
+3573.	[bug]		"rndc addzone" and "rndc delzone" incorrectly handled
+			zone names containing punctuation marks and other
+			nonstandard characters. [RT #33419]
+
+3571.	[bug]		Address race condition in dns_client_startresolve().
+			[RT #33234]
+
+3566.	[func]		Log when forwarding updates to master. [RT #33240]
+
 	--- 9.8.5 released ---
 
 3568.	[cleanup]	Add a product description line to the version file,
@@ -490,7 +1131,7 @@
 			     when queryperf is available.
 			 - the encoding of PASSTHRU action to "rpz-passthru".
 			     (The old encoding is still accepted.)
-		       [RT #26172]
+			[RT #26172]
 
 
 3329.	[bug]		Handle RRSIG signer-name case consistently: We
@@ -692,7 +1333,7 @@
 			timestamp. [RT #26883]
 
 3238.	[bug]		keyrdata was not being reinitialized in
-			lib/dns/rbtdb.c:iszonesecure. [RT#26913]
+			lib/dns/rbtdb.c:iszonesecure. [RT #26913]
 
 3237.	[bug]		dig -6 didn't work with +trace. [RT #26906]
 
@@ -826,7 +1467,7 @@
 
 3162.	[test]		start.pl: modified to allow for "named.args" in
 			ns*/ subdirectory to override stock arguments to
-			named. Largely from RT#26044, but no separate ticket.
+			named. Largely from RT #26044, but no separate ticket.
 
 3161.	[bug]		zone.c:del_sigs failed to always reset rdata leading
 			assertion failures. [RT #25880]
@@ -1494,13 +2135,13 @@
 
 2939.	[func]		Check that named successfully skips NSEC3 records
 			that fail to match the NSEC3PARAM record currently
-			in use. [RT# 21868]
+			in use. [RT #21868]
 
 2938.	[bug]		When generating signed responses, from a signed zone
 			that uses NSEC3, named would use a uninitialized
 			pointer if it needed to skip a NSEC3 record because
 			it didn't match the selected NSEC3PARAM record for
-			zone. [RT# 21868]
+			zone. [RT #21868]
 
 2937.	[bug]		Worked around an apparent race condition in over
 			memory conditions.  Without this fix a DNS cache DB or
@@ -1579,7 +2220,7 @@
 2926.	[placeholder]
 
 2925.	[bug]		Named failed to accept uncachable negative responses
-			from insecure zones. [RT# 21555]
+			from insecure zones. [RT #21555]
 
 2924.	[func]		'rndc  secroots'  dump a combined summary of the
 			current managed keys combined with trusted keys.
@@ -1639,7 +2280,7 @@
 2904.	[bug]		When using DLV, sub-zones of the zones in the DLV,
 			could be incorrectly marked as insecure instead of
 			secure leading to negative proofs failing.  This was
-			a unintended outcome from change 2890. [RT# 21392]
+			a unintended outcome from change 2890. [RT #21392]
 
 2903.	[bug]		managed-keys-directory missing from namedconf.c.
 			[RT #21370]
@@ -1674,7 +2315,7 @@
 2892.	[bug]		Handle REVOKED keys better. [RT #20961]
 
 2891.	[maint]		Update empty-zones list to match
-			draft-ietf-dnsop-default-local-zones-13. [RT# 21099]
+			draft-ietf-dnsop-default-local-zones-13. [RT #21099]
 
 2890.	[bug]		Handle the introduction of new trusted-keys and
 			DS, DLV RRsets better. [RT #21097]
@@ -2085,7 +2726,7 @@
 
 2761.	[cleanup]	Enable internal symbol table for backtrace only for
 			systems that are known to work.  Currently, BSD
-			variants, Linux and Solaris are supported. [RT# 20202]
+			variants, Linux and Solaris are supported. [RT #20202]
 
 2760.	[cleanup]	Corrected named-compilezone usage summary. [RT #20533]
 
@@ -2099,7 +2740,7 @@
 2757.	[bug]		dig: assertion failure could occur in connect
 			timeout. [RT #20599]
 
-2756.	[bug]		Fixed corrupt logfile message in update.c. [RT# 20597]
+2756.	[bug]		Fixed corrupt logfile message in update.c. [RT #20597]
 
 2755.	[placeholder]
 
@@ -3094,7 +3735,7 @@
 			glue when sibling checks were disabled. [RT #18768]
 
 2470.	[bug]		Elements of the isc_radix_node_t could be incorrectly
-			overwritten.  [RT# 18719]
+			overwritten.  [RT #18719]
 
 2469.	[port]		solaris: Work around Solaris's select() limitations.
 			[RT #18769]
@@ -3167,7 +3808,7 @@
 
 2446.	[func]		Add a new log message about build options on startup.
 			A new command-line option '-V' for named is also
-			provided to show this information. [RT# 18645]
+			provided to show this information. [RT #18645]
 
 2445.	[doc]		ARM out-of-date on empty reverse zones (list includes
 			RFC1918 address, but these are not yet compiled in).
@@ -3181,7 +3822,7 @@
 			Fix this by doing an immediate WSAConnect() rather
 			than an io completion port type for UDP.
 
-2442.	[bug]		A lock could be destroyed twice. [RT# 18626]
+2442.	[bug]		A lock could be destroyed twice. [RT #18626]
 
 2441.	[bug]		isc_radix_insert() could copy radix tree nodes
 			incompletely. [RT #18573]
@@ -3418,7 +4059,7 @@
 			[RT #18054]
 
 2368.	[port]		Linux: use libcap for capability management if
-			possible. [RT# 18026]
+			possible. [RT #18026]
 
 2367.	[bug]		Improve counting of dns_resstatscounter_retry
 			[RT #18030]
@@ -3696,7 +4337,7 @@
 2277.	[bug]		Empty zone names were not correctly being caught at
 			in the post parse checks. [RT #17357]
 
-2276.	[bug]		Install <dst/gssapi.h>.  [RT# 17359]
+2276.	[bug]		Install <dst/gssapi.h>.  [RT #17359]
 
 2275.	[func]		Add support to dig to perform IXFR queries over UDP.
 			[RT #17235]
@@ -3704,7 +4345,7 @@
 2274.	[func]		Log zone transfer statistics. [RT #17336]
 
 2273.	[bug]		Adjust log level to WARNING when saving inconsistent
-			stub/slave master and journal files. [RT# 17279]
+			stub/slave master and journal files. [RT #17279]
 
 2272.	[bug]		Handle illegal dnssec-lookaside trust-anchor names.
 			[RT #17262]
@@ -4130,7 +4771,7 @@
 			packet was sent to. [RT #16613]
 
 2142.	[bug]		Handle master files with a modification time that
-			matches the epoch. [RT# 16612]
+			matches the epoch. [RT #16612]
 
 2141.	[bug]		dig/host should not be setting IDN_ASCCHECK (IDN
 			equivalent of LDH checks).  [RT #16609]
@@ -4144,12 +4785,12 @@
 2138.	[bug]		Lock order reversal in resolver.c. [RT #16653]
 
 2137.	[port]		Mips little endian and/or mips 64 bit are now
-			supported for atomic operations. [RT#16648]
+			supported for atomic operations. [RT #16648]
 
 2136.	[bug]		nslookup/host looped if there was no search list
 			and the host didn't exist. [RT #16657]
 
-2135.	[bug]		Uninitialized rdataset in sdlz.c. [RT# 16656]
+2135.	[bug]		Uninitialized rdataset in sdlz.c. [RT #16656]
 
 2134.	[func]		Additional statistics support. [RT #16666]
 
@@ -4217,7 +4858,7 @@
 			labels were failing. [RT #16447]
 
 2113.	[bug]		nsupdate: if a zone is specified it should be used
-			for server discover. [RT# 16455]
+			for server discover. [RT #16455]
 
 2112.	[security]	Warn if weak RSA exponent is used. [RT #16460]
 
@@ -4265,7 +4906,7 @@
 2095.	[port]		libbind: alway prototype inet_cidr_ntop_ipv6() and
 			net_cidr_ntop_ipv6(). [RT #16388]
 
-2094.	[contrib]	Update named-bootconf.  [RT# 16404]
+2094.	[contrib]	Update named-bootconf.  [RT #16404]
 
 2093.	[bug]		named-checkzone -s was broken.
 
@@ -4417,7 +5058,7 @@
 			[RT #16179]
 
 2043.	[port]		nsupdate/nslookup: Force the flushing of the prompt
-			for interactive sessions. [RT#16148]
+			for interactive sessions. [RT #16148]
 
 2042.	[bug]		named-checkconf was incorrectly rejecting the
 			logging category "config". [RT #16117]
@@ -4789,7 +5430,7 @@
 
 1927.	[bug]		Access to soanode or nsnode in rbtdb violated the
 			lock order rule and could cause a dead lock.
-			[RT# 15518]
+			[RT #15518]
 
 1926.	[bug]		The Windows installer did not check for empty
 			passwords.  BINDinstall was being installed in
@@ -4806,7 +5447,7 @@
 			dns_log_setcontext().
 
 1921.	[bug]		Client memory contexts were not using internal
-			malloc. [RT# 15434]
+			malloc. [RT #15434]
 
 1920.	[bug]		The cache rbtdb lock array was too small to
 			have the desired performance characteristics.
@@ -5078,7 +5719,7 @@
 1832.	[bug]		named fails to return BADKEY on unknown TSIG algorithm.
 			[RT #13620]
 
-1831.	[doc]		Update named-checkzone documentation. [RT#13604]
+1831.	[doc]		Update named-checkzone documentation. [RT #13604]
 
 1830.	[bug]		adb lame cache has sence of test reversed. [RT #13600]
 
@@ -5099,7 +5740,7 @@
 			[RT #13510]
 
 1823.	[bug]		Wrong macro used to check for point to point interface.
-			[RT#13418]
+			[RT #13418]
 
 1822.	[bug]		check-names test for RT was reversed. [RT #13382]
 
@@ -5259,7 +5900,7 @@
 1771.	[placeholder]
 
 1770.	[bug]		named-checkconf failed to report missing a missing
-			file clause for rbt{64} master/hint zones. [RT#13009]
+			file clause for rbt{64} master/hint zones. [RT #13009]
 
 1769.	[port]		win32: change compiler flags /MTd ==> /MDd,
 			/MT ==> /MD.
@@ -5271,7 +5912,7 @@
 			support for (struct in6_pktinfo) failed.  [RT #13077]
 
 1766.	[bug]		Update the master file timestamp on successful refresh
-			as well as the journal's timestamp. [RT# 13062]
+			as well as the journal's timestamp. [RT #13062]
 
 1765.	[bug]		configure --with-openssl=auto failed. [RT #12937]
 
@@ -5424,7 +6065,7 @@
 			"ifconfig.sh down" didn't work for Solaris 9.
 
 1716.	[doc]		named.conf(5) was being installed in the wrong
-			location.  [RT# 12441]
+			location.  [RT #12441]
 
 1715.	[func]		'dig +trace' now randomly selects the next servers
 			to try.  Report if there is a bad delegation.
@@ -5493,7 +6134,7 @@
 			are defined in named.conf. [RT #12023]
 
 1693.	[bug]		max-journal-size was not effective for master zones
-			with ixfr-from-differences set. [RT# 12024]
+			with ixfr-from-differences set. [RT #12024]
 
 1692.	[bug]		Don't set -I, -L and -R flags when libcrypto is in
 			/usr/lib. [RT #11971]
@@ -5559,7 +6200,7 @@
 1671.	[contrib]	queryperf: add NAPTR to the list of known types.
 
 1670.	[func]		Log UPDATE requests to slave zones without an acl as
-			"disabled" at debug level 3. [RT# 11657]
+			"disabled" at debug level 3. [RT #11657]
 
 1669.	[placeholder]
 
@@ -5626,7 +6267,7 @@
 			[RT #11445]
 
 1646.	[bug]		win32: logging file versions didn't work with
-			non-UNC filenames.  [RT#11486]
+			non-UNC filenames.  [RT #11486]
 
 1645.	[bug]		named could trigger a REQUIRE failure if multiple
 			masters with keys are specified.
@@ -5676,17 +6317,17 @@
 1629.	[func]		dig now supports IPv6 scoped addresses with the
 			extended format in the local-server part. [RT #8753]
 
-1628.	[bug]		Typo in Compaq Trucluster support. [RT# 11264]
+1628.	[bug]		Typo in Compaq Trucluster support. [RT #11264]
 
 1627.	[bug]		win32: sockets were not being closed when the
-			last external reference was removed. [RT# 11179]
+			last external reference was removed. [RT #11179]
 
-1626.	[bug]		--enable-getifaddrs was broken. [RT#11259]
+1626.	[bug]		--enable-getifaddrs was broken. [RT #11259]
 
 1625.	[bug]		named failed to load/transfer RFC2535 signed zones
-			which contained CNAMES. [RT# 11237]
+			which contained CNAMES. [RT #11237]
 
-1624.	[bug]		zonemgr_putio() call should be locked. [RT# 11163]
+1624.	[bug]		zonemgr_putio() call should be locked. [RT #11163]
 
 1623.	[bug]		A serial number of zero was being displayed in the
 			"sending notifies" log message when also-notify was
@@ -5696,12 +6337,12 @@
 			available, and suppress wildcard binding if not.
 
 1621.	[bug]		match-destinations did not work for IPv6 TCP queries.
-			[RT# 11156]
+			[RT #11156]
 
 1620.	[func]		When loading a zone report if it is signed. [RT #11149]
 
 1619.	[bug]		Missing ISC_LIST_UNLINK in end_reserved_dispatches().
-			[RT# 11118]
+			[RT #11118]
 
 1618.	[bug]		Fencepost errors in dns_name_ishostname() and
 			dns_name_ismailbox() could trigger a INSIST().
@@ -5714,7 +6355,7 @@
 1615.	[port]		Define ISC_SOCKADDR_LEN_T based on _BSD_SOCKLEN_T_ if
 			it is defined.
 
-1614.	[port]		win32: silence resource limit messages. [RT# 11101]
+1614.	[port]		win32: silence resource limit messages. [RT #11101]
 
 1613.	[bug]		Builds would fail on machines w/o a if_nametoindex().
 			Missing #ifdef ISC_PLATFORM_HAVEIFNAMETOINDEX/#endif.
@@ -5721,7 +6362,7 @@
 			[RT #11119]
 
 1612.	[bug]		check-names at the option/view level could trigger
-			an INSIST. [RT# 11116]
+			an INSIST. [RT #11116]
 
 1611.	[bug]		solaris: IPv6 interface scanning failed to cope with
 			no active IPv6 interfaces.
@@ -5741,7 +6382,7 @@
 			to use when making queries.
 
 1607.	[bug]		dig, host and nslookup were still using random()
-			to generate query ids. [RT# 11013]
+			to generate query ids. [RT #11013]
 
 1606.	[bug]		DLV insecurity proof was failing.
 
@@ -5752,14 +6393,14 @@
 			partially initialized structure.
 
 1603.	[bug]		nsupdate: set interactive based on isatty().
-			[RT# 10929]
+			[RT #10929]
 
 1602.	[bug]		Logging to a file failed unless a size was specified.
-			[RT# 10925]
+			[RT #10925]
 
 1601.	[bug]		Silence spurious warning 'both "recursion no;" and
 			"allow-recursion" active' warning from view "_bind".
-			[RT# 10920]
+			[RT #10920]
 
 1600.	[bug]		Duplicate zone pre-load checks were not case
 			insensitive.
@@ -5782,9 +6423,9 @@
 			queries while the dump was in progress.  [RT #10565]
 
 1593.	[bug]		rndc should return "unknown command" to unknown
-			commands. [RT# 10642]
+			commands. [RT #10642]
 
-1592.	[bug]		configure_view() could leak a dispatch. [RT# 10675]
+1592.	[bug]		configure_view() could leak a dispatch. [RT #10675]
 
 1591.	[bug]		libbind: updated to BIND 8.4.5.
 
@@ -5825,7 +6466,7 @@
 			workaround code. [RT #10331]
 
 1576.	[bug]		Race condition in dns_dispatch_addresponse().
-			[RT# 10272]
+			[RT #10272]
 
 1575.	[func]		Log TSIG name on TSIG verify failure. [RT #4404]
 
@@ -5850,7 +6491,7 @@
 			complete answer message to the last update.
 
 1568.	[bug]		nsupdate now reports that the update failed in
-			interactive mode. [RT# 10236]
+			interactive mode. [RT #10236]
 
 1567.	[maint]		B.ROOT-SERVERS.NET is now 192.228.79.201.
 
@@ -5901,7 +6542,7 @@
 			were specified in /etc/resolv.conf. [RT #8232]
 
 1553.	[bug]		The windows socket code could stop accepting
-			connections. [RT#10115]
+			connections. [RT #10115]
 
 1552.	[bug]		Accept NOTIFY requests from mapped masters if
 			matched-mapped is set. [RT #10049]
@@ -5914,7 +6555,7 @@
 			in a easily parsable format (-D and -o).
 
 1548.	[bug]		When parsing APL records it was possible to silently
-			accept out of range ADDRESSFAMILY values. [RT# 9979]
+			accept out of range ADDRESSFAMILY values. [RT #9979]
 
 1547.	[bug]		Named wasted memory recording duplicate lame zone
 			entries. [RT #9341]
@@ -5951,10 +6592,10 @@
 
 1535.	[placeholder]
 
-1534.	[bug]		Race condition when priming cache. [RT# 9940]
+1534.	[bug]		Race condition when priming cache. [RT #9940]
 
 1533.	[func]		Warn if both "recursion no;" and "allow-recursion"
-			are active. [RT# 4389]
+			are active. [RT #4389]
 
 1532.	[port]		netbsd: the configure test for <sys/sysctl.h>
 			requires <sys/param.h>.
@@ -5966,7 +6607,7 @@
 			moment. [RT #9462]
 
 1529.	[bug]		"notify explicit;" failed to log that NOTIFY messages
-			were being sent for the zone. [RT# 9442]
+			were being sent for the zone. [RT #9442]
 
 1528.	[cleanup]	Simplify some dns_name_ functions based on the
 			deprecation of bitstring labels.
@@ -5982,18 +6623,18 @@
 
 1525.	[bug]		dns_cache_create() could trigger a REQUIRE
 			failure in isc_mem_put() during error cleanup.
-			[RT# 9360]
+			[RT #9360]
 
 1524.	[port]		AIX needs to be able to resolve all symbols when
 			creating shared libraries (--with-libtool).
 
-1523.	[bug]		Fix race condition in rbtdb. [RT# 9189]
+1523.	[bug]		Fix race condition in rbtdb. [RT #9189]
 
 1522.	[bug]		dns_db_findnode() relax the requirements on 'name'.
-			[RT# 9286]
+			[RT #9286]
 
 1521.	[bug]		dns_view_createresolver() failed to check the
-			result from isc_mem_create(). [RT# 9294]
+			result from isc_mem_create(). [RT #9294]
 
 1520.	[protocol]	Add SSHFP (SSH Finger Print) type.
 
@@ -6093,7 +6734,7 @@
 			[RT #6189]
 
 1486.	[bug]		isc_print_snprintf() '%%' consumed one too many format
-			characters. [RT# 8230]
+			characters. [RT #8230]
 
 1485.	[bug]		gen failed to handle high type values. [RT #6225]
 
@@ -6430,7 +7071,7 @@
 
 1372.	[bug]		named crashes with an assertion failure on exit when
 			sharing the same port for listening and querying, and
-			changing listening addresses several times. [RT# 3509]
+			changing listening addresses several times. [RT #3509]
 
 1371.	[bug]		notify-source-v6, transfer-source-v6 and
 			query-source-v6 with explicit addresses and using the
@@ -6453,7 +7094,7 @@
 			addresses / prefixes.
 
 1364.	[func]		Log file name when unable to open memory statistics
-			and dump database files. [RT# 3437]
+			and dump database files. [RT #3437]
 
 1363.	[func]		Listen-on-v6 now supports specific addresses.
 
@@ -6765,7 +7406,7 @@
 
 1252.	[bug]		Dig, host and nslookup were not checking the address
 			the answer was coming from against the address it was
-			sent to. [RT# 2692]
+			sent to. [RT #2692]
 
 1251.	[port]		win32: a make file contained absolute version specific
 			references.
@@ -6837,7 +7478,7 @@
 
 1227.	[bug]		dns_lex_getmastertoken() now returns ISC_R_BADNUMBER
 			if a number was expected and some other token was
-			found. [RT#2532]
+			found. [RT #2532]
 
 1226.	[func]		Use EDNS for zone refresh queries. [RT #2551]
 
@@ -8450,7 +9091,7 @@
  729.	[port]		pthread_setconcurrency() needs to be called on Solaris.
 
  728.	[bug]		Fix comment processing on master file directives.
-			[RT# 757]
+			[RT #757]
 
  727.	[port]		Work around OS bug where accept() succeeds but
 			fails to fill in the peer address of the accepted
@@ -8492,7 +9133,7 @@
 			failure in adb.c. [RT #738]
 
  714.	[bug]		Preserve interval timers across reloads unless changed.
-			[RT# 729]
+			[RT #729]
 
  713.	[func]		named-checkconf takes '-t directory' similar to named.
 			[RT #726]
@@ -8712,7 +9353,7 @@
  644.	[bug]		#622 needed more work. [RT #562]
 
  643.	[bug]		xfrin error messages made more verbose, added class
-			of the zone. [RT# 599]
+			of the zone. [RT #599]
 
  642.	[bug]		Break the exit_check() race in the zone module.
 			[RT #598]
@@ -9140,7 +9781,7 @@
 			assertion. [RT #399]
 
  515.	[bug]		The ssu table was not being attached / detached
-			by dns_zone_[sg]etssutable. [RT#397]
+			by dns_zone_[sg]etssutable. [RT #397]
 
  514.	[func]		Retry refresh and notify queries if they timeout.
 			[RT #388]
@@ -9474,7 +10115,7 @@
 			transfers were finished.
 
  413.	[bug]		Notify could attempt to use the zone database after
-			it had been unloaded. [RT#267]
+			it had been unloaded. [RT #267]
 
  412.	[bug]		named -v didn't print the version.
 
@@ -9662,7 +10303,7 @@
 			the distribution, in doc/man/dnssec.
 
  353.	[bug]		double increment in lwres/gethost.c:copytobuf().
-			[RT# 187]
+			[RT #187]
 
  352.	[bug]		Race condition in dns_client_t startup could cause
 			an assertion failure.

Modified: vendor/bind/dist/COPYRIGHT
===================================================================
--- vendor/bind/dist/COPYRIGHT	2016-11-03 12:21:01 UTC (rev 9202)
+++ vendor/bind/dist/COPYRIGHT	2016-11-03 12:22:00 UTC (rev 9203)
@@ -1,4 +1,4 @@
-Copyright (C) 2004-2013  Internet Systems Consortium, Inc. ("ISC")
+Copyright (C) 2004-2014  Internet Systems Consortium, Inc. ("ISC")
 Copyright (C) 1996-2003  Internet Software Consortium.
 
 Permission to use, copy, modify, and/or distribute this software for any
@@ -13,8 +13,6 @@
 OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
 PERFORMANCE OF THIS SOFTWARE.
 
-$Id: COPYRIGHT,v 1.1.1.2 2013-08-22 22:51:51 laffer1 Exp $
-
 	Portions of this code release fall under one or more of the
 	following Copyright notices.  Please see individual source
 	files for details.
@@ -99,11 +97,7 @@
 2. Redistributions in binary form must reproduce the above copyright
    notice, this list of conditions and the following disclaimer in the
    documentation and/or other materials provided with the distribution.
-3. All advertising materials mentioning features or use of this software
-   must display the following acknowledgement:
-     This product includes software developed by the University of
-     California, Berkeley and its contributors.
-4. Neither the name of the University nor the names of its contributors
+3. Neither the name of the University nor the names of its contributors
    may be used to endorse or promote products derived from this software
    without specific prior written permission.
 
@@ -516,3 +510,29 @@
 ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
 OF THE POSSIBILITY OF SUCH DAMAGE.
 
+-----------------------------------------------------------------------------
+
+Copyright (c) 1995, 1997, 1998 The NetBSD Foundation, Inc.
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions
+are met:
+1. Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+2. Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+
+THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
+``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
+BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+

Modified: vendor/bind/dist/FAQ.xml
===================================================================
--- vendor/bind/dist/FAQ.xml	2016-11-03 12:21:01 UTC (rev 9202)
+++ vendor/bind/dist/FAQ.xml	2016-11-03 12:22:00 UTC (rev 9203)
@@ -17,7 +17,7 @@
  - PERFORMANCE OF THIS SOFTWARE.
 -->
 
-<!-- $Id: FAQ.xml,v 1.1.1.2 2013-08-22 22:51:51 laffer1 Exp $ -->
+<!-- $Id: FAQ.xml,v 1.54 2010/01/19 23:48:55 tbox Exp $ -->
 
 <article class="faq">
   <title>Frequently Asked Questions about BIND 9</title>

Modified: vendor/bind/dist/Makefile.in
===================================================================
--- vendor/bind/dist/Makefile.in	2016-11-03 12:21:01 UTC (rev 9202)
+++ vendor/bind/dist/Makefile.in	2016-11-03 12:22:00 UTC (rev 9203)
@@ -1,4 +1,4 @@
-# Copyright (C) 2004-2009, 2011-2013  Internet Systems Consortium, Inc. ("ISC")
+# Copyright (C) 2004-2009, 2011-2014  Internet Systems Consortium, Inc. ("ISC")
 # Copyright (C) 1998-2002  Internet Software Consortium.
 #
 # Permission to use, copy, modify, and/or distribute this software for any
@@ -13,7 +13,7 @@
 # OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
 # PERFORMANCE OF THIS SOFTWARE.
 
-# $Id: Makefile.in,v 1.1.1.2 2013-08-22 22:51:51 laffer1 Exp $
+# $Id: Makefile.in,v 1.58.250.4 2011/09/06 04:06:11 marka Exp $
 
 srcdir =	@srcdir@
 VPATH =		@srcdir@
@@ -54,7 +54,11 @@
 
 install:: isc-config.sh installdirs
 	${INSTALL_SCRIPT} isc-config.sh ${DESTDIR}${bindir}
+	rm -f ${DESTDIR}${bindir}/bind9-config
+	@LN@ ${DESTDIR}${bindir}/isc-config.sh ${DESTDIR}${bindir}/bind9-config
 	${INSTALL_DATA} ${top_srcdir}/isc-config.sh.1 ${DESTDIR}${mandir}/man1
+	rm -f ${DESTDIR}${mandir}/man1/bind9-config.1
+	@LN@ ${DESTDIR}${mandir}/man1/isc-config.sh.1 ${DESTDIR}${mandir}/man1/bind9-config.1
 	${INSTALL_DATA} ${top_srcdir}/bind.keys ${DESTDIR}${sysconfdir}
 
 tags:
@@ -86,5 +90,8 @@
 	LC_ALL=C ${W3M} -T text/html -dump -cols 72 >$@.tmp
 	mv $@.tmp $@
 
+unit::
+	sh ${top_srcdir}/unit/unittest.sh
+
 clean::
 	rm -f FAQ.tmp

Modified: vendor/bind/dist/README
===================================================================
--- vendor/bind/dist/README	2016-11-03 12:21:01 UTC (rev 9202)
+++ vendor/bind/dist/README	2016-11-03 12:22:00 UTC (rev 9203)
@@ -48,18 +48,45 @@
 	For a detailed list of user-visible changes from
 	previous releases, see the CHANGES file.
 
-        For up-to-date release notes and errata, see
-        http://www.isc.org/software/bind9/releasenotes
+	For up-to-date release notes and errata, see
+	http://www.isc.org/software/bind9/releasenotes
 
+BIND 9.8.8
+
+	BIND 9.8.8 is a maintenance release, and also includes
+        the following new functionality.
+
+	 - The former behavior with respect to capitalization of names
+           (prior to BIND 9.8.7) can be restored for specific clients via
+           the new "no-case-compress" ACL.
+
+BIND 9.8.7
+ 
+	BIND 9.8.7 includes several bug fixes and patches the security
+	flaws described in CVE-2013-6320 and CVE-2014-0591.  It also
+	includes the following functional enhancements:
+
+	 - "named" now preserves the capitalization of names when
+	    responding to queries.
+	 - "named-checkconf -px" will print the contents of configuration
+	   files with the shared secrets obscured, making it easier to
+	   share configuration (e.g. when submitting a bug report)
+	   without revealing private information.
+
+BIND 9.8.6
+
+	BIND 9.8.6 includes several bug fixes and patches the security
+	flaws described in CVE-2013-3919 and CVE-2013-4854.
+
 BIND 9.8.5
 
-        BIND 9.8.5 includes several bug fixes and patches security
-        flaws described in CVE-2012-5688, CVE-2012-5689 and CVE-2013-2266.
+	BIND 9.8.5 includes several bug fixes and patches security
+	flaws described in CVE-2012-5688, CVE-2012-5689 and CVE-2013-2266.
 
 BIND 9.8.4
 
-        BIND 9.8.4 includes several bug fixes and patches security
-        flaws described in CVE-2012-1667, CVE-2012-3817 and CVE-2012-4244.
+	BIND 9.8.4 includes several bug fixes and patches security
+	flaws described in CVE-2012-1667, CVE-2012-3817 and CVE-2012-4244.
 
 BIND 9.8.3
 
@@ -72,32 +99,32 @@
 
 BIND 9.8.1
 
-        BIND 9.8.1 includes a number of bug fixes and enhancements from
+	BIND 9.8.1 includes a number of bug fixes and enhancements from
 	BIND 9.8 and earlier releases.  New features include:
 
 	- The DLZ "dlopen" driver is now built by default.
 	- Added a new include file with function typedefs
-          for the DLZ "dlopen" driver.
+	  for the DLZ "dlopen" driver.
 	- Made "--with-gssapi" default.
 	- More verbose error reporting from DLZ LDAP.
 
 BIND 9.8.0
 
-        BIND 9.8.0 includes a number of changes from BIND 9.7 and earlier
-        releases.  New features include:
+	BIND 9.8.0 includes a number of changes from BIND 9.7 and earlier
+	releases.  New features include:
 
-        - Built-in trust anchor for the root zone, which can be
-          switched on via "dnssec-validation auto;"
-        - Support for DNS64.
-        - Support for response policy zones (RPZ).
-        - Support for writable DLZ zones.
-        - Improved ease of configuration of GSS/TSIG for
-          interoperability with Active Directory
-        - Support for GOST signing algorithm for DNSSEC.
-        - Removed RTT Banding from server selection algorithm.
-        - New "static-stub" zone type.
-        - Allow configuration of resolver timeouts via
-          "resolver-query-timeout" option.
+	- Built-in trust anchor for the root zone, which can be
+	  switched on via "dnssec-validation auto;"
+	- Support for DNS64.
+	- Support for response policy zones (RPZ).
+	- Support for writable DLZ zones.
+	- Improved ease of configuration of GSS/TSIG for
+	  interoperability with Active Directory
+	- Support for GOST signing algorithm for DNSSEC.
+	- Removed RTT Banding from server selection algorithm.
+	- New "static-stub" zone type.
+	- Allow configuration of resolver timeouts via
+	  "resolver-query-timeout" option.
 
 BIND 9.7.0
 
@@ -183,9 +210,9 @@
 		Ubuntu 7.04, 7.10
 		Windows XP/2003/2008
 
-        NOTE:  As of BIND 9.5.1, 9.4.3, and 9.3.6, older versions of
-        Windows, including Windows NT and Windows 2000, are no longer
-        supported.
+	NOTE:  As of BIND 9.5.1, 9.4.3, and 9.3.6, older versions of
+	Windows, including Windows NT and Windows 2000, are no longer
+	supported.
 
 	We have recent reports from the user community that a supported
 	version of BIND will build and run on the following systems:
@@ -238,7 +265,7 @@
 				    -DDIG_SIGCHASE_BU=1)
 		Disable dropping queries from particular well known ports.
 		  -DNS_CLIENT_DROPPORT=0
-	        Sibling glue checking in named-checkzone is enabled by default.
+		Sibling glue checking in named-checkzone is enabled by default.
 		To disable the default check set.  -DCHECK_SIBLING=0
 		named-checkzone checks out-of-zone addresses by default.
 		To disable this default set.  -DCHECK_LOCAL=0
@@ -285,10 +312,10 @@
 	on the configure command line.  The default is operating
 	system dependent.
 
-        Support for the "fixed" rrset-order option can be enabled
-        or disabled by specifying "--enable-fixed-rrset" or
-        "--disable-fixed-rrset" on the configure command line.
-        The default is "disabled", to reduce memory footprint.
+	Support for the "fixed" rrset-order option can be enabled
+	or disabled by specifying "--enable-fixed-rrset" or
+	"--disable-fixed-rrset" on the configure command line.
+	The default is "disabled", to reduce memory footprint.
 
 	If your operating system has integrated support for IPv6, it
 	will be used automatically.  If you have installed KAME IPv6
@@ -355,8 +382,8 @@
 	Frequently asked questions and their answers can be found in
 	FAQ.
 
-        Additional information on various subjects can be found
-        in the other README files.
+	Additional information on various subjects can be found
+	in the other README files.
 
 
 Change Log
@@ -373,7 +400,7 @@
 	   [security]	  Fix for a significant security flaw
 
 	   [experimental] Used for new features when the syntax
-	   		  or other aspects of the design are still
+			  or other aspects of the design are still
 			  in flux and may change
 
 	   [port]	  Portability enhancement
@@ -382,18 +409,26 @@
 			  server addresses and keys
 
 	   [tuning]	  Changes to built-in configuration defaults
-	   		  and constants to improve performanceo
+			  and constants to improve performanceo
 
 	   [protocol]	  Updates to the DNS protocol such as new
 			  RR types
 
-           [test]         Changes to the automatic tests, not
-                          affecting server functionality
+	   [test]         Changes to the automatic tests, not
+			  affecting server functionality
 
-           [cleanup]      Minor corrections and refactoring
+	   [cleanup]      Minor corrections and refactoring
 
 	   [doc]	  Documentation
 
+	   [contrib]	  Changes to the contributed tools and
+			  libraries in the 'contrib' subdirectory
+
+	   [placeholder]  Used in the master development branch to
+			  reserve change numbers for use in other
+			  branches, e.g. when fixing a bug that only
+			  exists in older releases
+
 	In general, [func] and [experimental] tags will only appear
 	in new-feature releases (i.e., those with version numbers
 	ending in zero).  Some new functionality may be backported to
@@ -403,22 +438,28 @@
 
 Bug Reports and Mailing Lists
 
-	Bugs reports should be sent to
+	Bug reports should be sent to:
 
 		bind9-bugs at isc.org
 
-	To join the BIND Users mailing list, send mail to
+	Feature requests can be sent to:
 
-		bind-users-request at isc.org
+		bind-suggest at isc.org
 
-	archives of which can be found via
+	To join or view the archives of the BIND Users mailing list,
+	visit:
 
-		http://www.isc.org/ops/lists/
+		https://lists.isc.org/mailman/listinfo/bind-users
 
 	If you're planning on making changes to the BIND 9 source
-	code, you might want to join the BIND Workers mailing list.
-	Send mail to
+	code, you may also want to join the BIND Workers mailing
+	list:
 
-		bind-workers-request at isc.org
+		https://lists.isc.org/mailman/listinfo/bind-workers
 
+	Information on read-only Git access, coding style and developer
+	guidelines can be found at:
 
+		http://www.isc.org/git/
+
+

Modified: vendor/bind/dist/acconfig.h
===================================================================
--- vendor/bind/dist/acconfig.h	2016-11-03 12:21:01 UTC (rev 9202)
+++ vendor/bind/dist/acconfig.h	2016-11-03 12:22:00 UTC (rev 9203)
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2004, 2005, 2007, 2008, 2012  Internet Systems Consortium, Inc. ("ISC")
+ * Copyright (C) 2004, 2005, 2007, 2008, 2012, 2014  Internet Systems Consortium, Inc. ("ISC")
  * Copyright (C) 1999-2003  Internet Software Consortium.
  *
  * Permission to use, copy, modify, and/or distribute this software for any
@@ -15,7 +15,7 @@
  * PERFORMANCE OF THIS SOFTWARE.
  */
 
-/* $Id: acconfig.h,v 1.1.1.1 2013-01-30 01:44:56 laffer1 Exp $ */
+/* $Id: acconfig.h,v 1.53 2008/12/01 23:47:44 tbox Exp $ */
 
 /*! \file */
 
@@ -73,6 +73,9 @@
 /** define if arc4random() exists */
 #undef HAVE_ARC4RANDOM
 
+/** define if arc4random_addrandom() exists */
+#undef HAVE_ARC4RANDOM_ADDRANDOM
+
 /**
  * define if pthread_setconcurrency() should be called to tell the
  * OS how many threads we might want to run.

Deleted: vendor/bind/dist/aclocal.m4
===================================================================
--- vendor/bind/dist/aclocal.m4	2016-11-03 12:21:01 UTC (rev 9202)
+++ vendor/bind/dist/aclocal.m4	2016-11-03 12:22:00 UTC (rev 9203)
@@ -1,5 +0,0 @@
-sinclude(libtool.m4/libtool.m4)dnl
-sinclude(libtool.m4/ltoptions.m4)dnl
-sinclude(libtool.m4/ltsugar.m4)dnl
-sinclude(libtool.m4/ltversion.m4)dnl
-sinclude(libtool.m4/lt~obsolete.m4)dnl

Modified: vendor/bind/dist/bind.keys
===================================================================
--- vendor/bind/dist/bind.keys	2016-11-03 12:21:01 UTC (rev 9202)
+++ vendor/bind/dist/bind.keys	2016-11-03 12:22:00 UTC (rev 9203)
@@ -1,4 +1,4 @@
-/* $Id: bind.keys,v 1.1.1.1 2013-01-30 01:44:56 laffer1 Exp $ */
+/* $Id: bind.keys,v 1.7 2011/01/03 23:45:07 each Exp $ */
 # The bind.keys file is used to override the built-in DNSSEC trust anchors
 # which are included as part of BIND 9.  As of the current release, the only
 # trust anchors it contains are those for the DNS root zone ("."), and for

Modified: vendor/bind/dist/config.guess
===================================================================
--- vendor/bind/dist/config.guess	2016-11-03 12:21:01 UTC (rev 9202)
+++ vendor/bind/dist/config.guess	2016-11-03 12:22:00 UTC (rev 9203)
@@ -1,13 +1,12 @@
 #! /bin/sh
 # Attempt to guess a canonical system name.
-#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-#   2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
+#   Copyright 1992-2013 Free Software Foundation, Inc.
 
-timestamp='2009-01-17'
+timestamp='2013-11-29'
 
 # This file is free software; you can redistribute it and/or modify it
 # under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
+# the Free Software Foundation; either version 3 of the License, or
 # (at your option) any later version.
 #
 # This program is distributed in the hope that it will be useful, but
@@ -16,25 +15,23 @@
 # General Public License for more details.
 #
 # You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+# along with this program; if not, see <http://www.gnu.org/licenses/>.
 #
 # As a special exception to the GNU General Public License, if you
 # distribute this file as part of a program that contains a
 # configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Originally written by Per Bothner <per at bothner.com>.
-# Please send patches to <config-patches at gnu.org>.  Submit a context
-# diff and a properly formatted ChangeLog entry.
+# the same distribution terms that you use for the rest of that
+# program.  This Exception is an additional permission under section 7
+# of the GNU General Public License, version 3 ("GPLv3").
 #
-# This script attempts to guess a canonical system name similar to
-# config.sub.  If it succeeds, it prints the system name on stdout, and
-# exits with 0.  Otherwise, it exits with 1.
+# Originally written by Per Bothner.
 #
-# The plan is that this can be called by configure scripts if you
-# don't specify an explicit build system type.
+# You can get the latest version of this script from:
+# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
+#
+# Please send patches with a ChangeLog entry to config-patches at gnu.org.
 
+
 me=`echo "$0" | sed -e 's,.*/,,'`
 
 usage="\
@@ -53,8 +50,7 @@
 GNU config.guess ($timestamp)
 
 Originally written by Per Bothner.
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
-Free Software Foundation, Inc.
+Copyright 1992-2013 Free Software Foundation, Inc.
 
 This is free software; see the source for copying conditions.  There is NO
 warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
@@ -66,11 +62,11 @@
 while test $# -gt 0 ; do
   case $1 in
     --time-stamp | --time* | -t )
-       echo "$timestamp" ; exit 0 ;;
+       echo "$timestamp" ; exit ;;
     --version | -v )
-       echo "$version" ; exit 0 ;;
+       echo "$version" ; exit ;;
     --help | --h* | -h )
-       echo "$usage"; exit 0 ;;
+       echo "$usage"; exit ;;
     -- )     # Stop option processing
        shift; break ;;
     - )	# Use stdin as input.
@@ -104,7 +100,7 @@
 trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
 trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
 : ${TMPDIR=/tmp} ;
- { tmp=`(umask 077 && mktemp -d -q "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
+ { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
  { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
  { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
  { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
@@ -123,7 +119,7 @@
 	;;
  ,,*)   CC_FOR_BUILD=$CC ;;
  ,*,*)  CC_FOR_BUILD=$HOST_CC ;;
-esac ;'
+esac ; set_cc_for_build= ;'
 
 # This is needed to find uname on a Pyramid OSx when run in the BSD universe.
 # (ghazi at noc.rutgers.edu 1994-08-24)
@@ -136,6 +132,27 @@
 UNAME_SYSTEM=`(uname -s) 2>/dev/null`  || UNAME_SYSTEM=unknown
 UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
 
+case "${UNAME_SYSTEM}" in
+Linux|GNU|GNU/*)
+	# If the system lacks a compiler, then just pick glibc.
+	# We could probably try harder.
+	LIBC=gnu
+
+	eval $set_cc_for_build
+	cat <<-EOF > $dummy.c
+	#include <features.h>
+	#if defined(__UCLIBC__)
+	LIBC=uclibc
+	#elif defined(__dietlibc__)
+	LIBC=dietlibc
+	#else
+	LIBC=gnu
+	#endif
+	EOF
+	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC'`
+	;;
+esac
+
 # Note: order is significant - the case branches are not exclusive.
 
 case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
@@ -158,6 +175,7 @@
 	    arm*) machine=arm-unknown ;;
 	    sh3el) machine=shl-unknown ;;
 	    sh3eb) machine=sh-unknown ;;
+	    sh5el) machine=sh5le-unknown ;;
 	    *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
 	esac
 	# The Operating System including object format, if it has switched
@@ -166,7 +184,7 @@
 	    arm*|i386|m68k|ns32k|sh3*|sparc|vax)
 		eval $set_cc_for_build
 		if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
-			| grep __ELF__ >/dev/null
+			| grep -q __ELF__
 		then
 		    # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
 		    # Return netbsd for either.  FIX?
@@ -176,7 +194,7 @@
 		fi
 		;;
 	    *)
-	        os=netbsd
+		os=netbsd
 		;;
 	esac
 	# The OS release
@@ -196,55 +214,27 @@
 	# contains redundant information, the shorter form:
 	# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
 	echo "${machine}-${os}${release}"
-	exit 0 ;;
-    amd64:OpenBSD:*:*)
-	echo x86_64-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    amiga:OpenBSD:*:*)
-	echo m68k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    cats:OpenBSD:*:*)
-	echo arm-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    hp300:OpenBSD:*:*)
-	echo m68k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    luna88k:OpenBSD:*:*)
-    	echo m88k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    mac68k:OpenBSD:*:*)
-	echo m68k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    macppc:OpenBSD:*:*)
-	echo powerpc-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    mvme68k:OpenBSD:*:*)
-	echo m68k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    mvme88k:OpenBSD:*:*)
-	echo m88k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    mvmeppc:OpenBSD:*:*)
-	echo powerpc-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    sgi:OpenBSD:*:*)
-	echo mips64-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    sun3:OpenBSD:*:*)
-	echo m68k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
+    *:Bitrig:*:*)
+	UNAME_MACHINE_ARCH=`arch | sed 's/Bitrig.//'`
+	echo ${UNAME_MACHINE_ARCH}-unknown-bitrig${UNAME_RELEASE}
+	exit ;;
     *:OpenBSD:*:*)
-	echo ${UNAME_MACHINE}-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
+	UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
+	echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE}
+	exit ;;
     *:ekkoBSD:*:*)
 	echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
+    *:SolidBSD:*:*)
+	echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE}
+	exit ;;
     macppc:MirBSD:*:*)
-	echo powerppc-unknown-mirbsd${UNAME_RELEASE}
-	exit 0 ;;
+	echo powerpc-unknown-mirbsd${UNAME_RELEASE}
+	exit ;;
     *:MirBSD:*:*)
 	echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     alpha:OSF1:*:*)
 	case $UNAME_RELEASE in
 	*4.0)
@@ -251,7 +241,7 @@
 		UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
 		;;
 	*5.*)
-	        UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
+		UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
 		;;
 	esac
 	# According to Compaq, /usr/sbin/psrinfo has been available on
@@ -297,37 +287,46 @@
 	# A Xn.n version is an unreleased experimental baselevel.
 	# 1.2 uses "1.2" for uname -r.
 	echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
-	exit 0 ;;
+	# Reset EXIT trap before exiting to avoid spurious non-zero exit code.
+	exitcode=$?
+	trap '' 0
+	exit $exitcode ;;
     Alpha\ *:Windows_NT*:*)
 	# How do we know it's Interix rather than the generic POSIX subsystem?
 	# Should we change UNAME_MACHINE based on the output of uname instead
 	# of the specific Alpha model?
 	echo alpha-pc-interix
-	exit 0 ;;
+	exit ;;
     21064:Windows_NT:50:3)
 	echo alpha-dec-winnt3.5
-	exit 0 ;;
+	exit ;;
     Amiga*:UNIX_System_V:4.0:*)
 	echo m68k-unknown-sysv4
-	exit 0;;
+	exit ;;
     *:[Aa]miga[Oo][Ss]:*:*)
 	echo ${UNAME_MACHINE}-unknown-amigaos
-	exit 0 ;;
+	exit ;;
     *:[Mm]orph[Oo][Ss]:*:*)
 	echo ${UNAME_MACHINE}-unknown-morphos
-	exit 0 ;;
+	exit ;;
     *:OS/390:*:*)
 	echo i370-ibm-openedition
-	exit 0 ;;
+	exit ;;
+    *:z/VM:*:*)
+	echo s390-ibm-zvmoe
+	exit ;;
     *:OS400:*:*)
-        echo powerpc-ibm-os400
-	exit 0 ;;
+	echo powerpc-ibm-os400
+	exit ;;
     arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
 	echo arm-acorn-riscix${UNAME_RELEASE}
-	exit 0;;
+	exit ;;
+    arm*:riscos:*:*|arm*:RISCOS:*:*)
+	echo arm-unknown-riscos
+	exit ;;
     SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
 	echo hppa1.1-hitachi-hiuxmpp
-	exit 0;;
+	exit ;;
     Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
 	# akee at wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
 	if test "`(/bin/universe) 2>/dev/null`" = att ; then
@@ -335,32 +334,51 @@
 	else
 		echo pyramid-pyramid-bsd
 	fi
-	exit 0 ;;
+	exit ;;
     NILE*:*:*:dcosx)
 	echo pyramid-pyramid-svr4
-	exit 0 ;;
+	exit ;;
     DRS?6000:unix:4.0:6*)
 	echo sparc-icl-nx6
-	exit 0 ;;
-    DRS?6000:UNIX_SV:4.2*:7*)
+	exit ;;
+    DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*)
 	case `/usr/bin/uname -p` in
-	    sparc) echo sparc-icl-nx7 && exit 0 ;;
+	    sparc) echo sparc-icl-nx7; exit ;;
 	esac ;;
+    s390x:SunOS:*:*)
+	echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
     sun4H:SunOS:5.*:*)
 	echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit 0 ;;
+	exit ;;
     sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
 	echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit 0 ;;
-    i86pc:SunOS:5.*:*)
-	echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit 0 ;;
+	exit ;;
+    i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*)
+	echo i386-pc-auroraux${UNAME_RELEASE}
+	exit ;;
+    i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
+	eval $set_cc_for_build
+	SUN_ARCH="i386"
+	# If there is a compiler, see if it is configured for 64-bit objects.
+	# Note that the Sun cc does not turn __LP64__ into 1 like gcc does.
+	# This test works for both compilers.
+	if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
+	    if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \
+		(CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
+		grep IS_64BIT_ARCH >/dev/null
+	    then
+		SUN_ARCH="x86_64"
+	    fi
+	fi
+	echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
     sun4*:SunOS:6*:*)
 	# According to config.sub, this is the proper way to canonicalize
 	# SunOS6.  Hard to guess exactly what SunOS6 will be like, but
 	# it's likely to be more like Solaris than SunOS4.
 	echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit 0 ;;
+	exit ;;
     sun4*:SunOS:*:*)
 	case "`/usr/bin/arch -k`" in
 	    Series*|S4*)
@@ -369,10 +387,10 @@
 	esac
 	# Japanese Language versions have a version number like `4.1.3-JL'.
 	echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
-	exit 0 ;;
+	exit ;;
     sun3*:SunOS:*:*)
 	echo m68k-sun-sunos${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     sun*:*:4.2BSD:*)
 	UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
 	test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
@@ -384,10 +402,10 @@
 		echo sparc-sun-sunos${UNAME_RELEASE}
 		;;
 	esac
-	exit 0 ;;
+	exit ;;
     aushp:SunOS:*:*)
 	echo sparc-auspex-sunos${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     # The situation for MiNT is a little confusing.  The machine name
     # can be virtually everything (everything which is not
     # "atarist" or "atariste" at least should have a processor
@@ -397,41 +415,41 @@
     # MiNT.  But MiNT is downward compatible to TOS, so this should
     # be no problem.
     atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
-        echo m68k-atari-mint${UNAME_RELEASE}
-	exit 0 ;;
+	echo m68k-atari-mint${UNAME_RELEASE}
+	exit ;;
     atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
 	echo m68k-atari-mint${UNAME_RELEASE}
-        exit 0 ;;
+	exit ;;
     *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
-        echo m68k-atari-mint${UNAME_RELEASE}
-	exit 0 ;;
+	echo m68k-atari-mint${UNAME_RELEASE}
+	exit ;;
     milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
-        echo m68k-milan-mint${UNAME_RELEASE}
-        exit 0 ;;
+	echo m68k-milan-mint${UNAME_RELEASE}
+	exit ;;
     hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
-        echo m68k-hades-mint${UNAME_RELEASE}
-        exit 0 ;;
+	echo m68k-hades-mint${UNAME_RELEASE}
+	exit ;;
     *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
-        echo m68k-unknown-mint${UNAME_RELEASE}
-        exit 0 ;;
+	echo m68k-unknown-mint${UNAME_RELEASE}
+	exit ;;
     m68k:machten:*:*)
 	echo m68k-apple-machten${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     powerpc:machten:*:*)
 	echo powerpc-apple-machten${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     RISC*:Mach:*:*)
 	echo mips-dec-mach_bsd4.3
-	exit 0 ;;
+	exit ;;
     RISC*:ULTRIX:*:*)
 	echo mips-dec-ultrix${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     VAX*:ULTRIX*:*:*)
 	echo vax-dec-ultrix${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     2020:CLIX:*:* | 2430:CLIX:*:*)
 	echo clipper-intergraph-clix${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     mips:*:*:UMIPS | mips:*:*:RISCos)
 	eval $set_cc_for_build
 	sed 's/^	//' << EOF >$dummy.c
@@ -455,35 +473,36 @@
 	  exit (-1);
 	}
 EOF
-	$CC_FOR_BUILD -o $dummy $dummy.c \
-	  && $dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \
-	  && exit 0
+	$CC_FOR_BUILD -o $dummy $dummy.c &&
+	  dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` &&
+	  SYSTEM_NAME=`$dummy $dummyarg` &&
+	    { echo "$SYSTEM_NAME"; exit; }
 	echo mips-mips-riscos${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     Motorola:PowerMAX_OS:*:*)
 	echo powerpc-motorola-powermax
-	exit 0 ;;
+	exit ;;
     Motorola:*:4.3:PL8-*)
 	echo powerpc-harris-powermax
-	exit 0 ;;
+	exit ;;
     Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
 	echo powerpc-harris-powermax
-	exit 0 ;;
+	exit ;;
     Night_Hawk:Power_UNIX:*:*)
 	echo powerpc-harris-powerunix
-	exit 0 ;;
+	exit ;;
     m88k:CX/UX:7*:*)
 	echo m88k-harris-cxux7
-	exit 0 ;;
+	exit ;;
     m88k:*:4*:R4*)
 	echo m88k-motorola-sysv4
-	exit 0 ;;
+	exit ;;
     m88k:*:3*:R3*)
 	echo m88k-motorola-sysv3
-	exit 0 ;;
+	exit ;;
     AViiON:dgux:*:*)
-        # DG/UX returns AViiON for all architectures
-        UNAME_PROCESSOR=`/usr/bin/uname -p`
+	# DG/UX returns AViiON for all architectures
+	UNAME_PROCESSOR=`/usr/bin/uname -p`
 	if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
 	then
 	    if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
@@ -496,29 +515,29 @@
 	else
 	    echo i586-dg-dgux${UNAME_RELEASE}
 	fi
- 	exit 0 ;;
+	exit ;;
     M88*:DolphinOS:*:*)	# DolphinOS (SVR3)
 	echo m88k-dolphin-sysv3
-	exit 0 ;;
+	exit ;;
     M88*:*:R3*:*)
 	# Delta 88k system running SVR3
 	echo m88k-motorola-sysv3
-	exit 0 ;;
+	exit ;;
     XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
 	echo m88k-tektronix-sysv3
-	exit 0 ;;
+	exit ;;
     Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
 	echo m68k-tektronix-bsd
-	exit 0 ;;
+	exit ;;
     *:IRIX*:*:*)
 	echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
-	exit 0 ;;
+	exit ;;
     ????????:AIX?:[12].1:2)   # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
-	echo romp-ibm-aix      # uname -m gives an 8 hex-code CPU id
-	exit 0 ;;              # Note that: echo "'`uname -s`'" gives 'AIX '
+	echo romp-ibm-aix     # uname -m gives an 8 hex-code CPU id
+	exit ;;               # Note that: echo "'`uname -s`'" gives 'AIX '
     i*86:AIX:*:*)
 	echo i386-ibm-aix
-	exit 0 ;;
+	exit ;;
     ia64:AIX:*:*)
 	if [ -x /usr/bin/oslevel ] ; then
 		IBM_REV=`/usr/bin/oslevel`
@@ -526,7 +545,7 @@
 		IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
 	fi
 	echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
-	exit 0 ;;
+	exit ;;
     *:AIX:2:3)
 	if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
 		eval $set_cc_for_build
@@ -541,15 +560,19 @@
 			exit(0);
 			}
 EOF
-		$CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0
-		echo rs6000-ibm-aix3.2.5
+		if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy`
+		then
+			echo "$SYSTEM_NAME"
+		else
+			echo rs6000-ibm-aix3.2.5
+		fi
 	elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
 		echo rs6000-ibm-aix3.2.4
 	else
 		echo rs6000-ibm-aix3.2
 	fi
-	exit 0 ;;
-    *:AIX:*:[45])
+	exit ;;
+    *:AIX:*:[4567])
 	IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
 	if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
 		IBM_ARCH=rs6000
@@ -562,28 +585,28 @@
 		IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
 	fi
 	echo ${IBM_ARCH}-ibm-aix${IBM_REV}
-	exit 0 ;;
+	exit ;;
     *:AIX:*:*)
 	echo rs6000-ibm-aix
-	exit 0 ;;
+	exit ;;
     ibmrt:4.4BSD:*|romp-ibm:BSD:*)
 	echo romp-ibm-bsd4.4
-	exit 0 ;;
+	exit ;;
     ibmrt:*BSD:*|romp-ibm:BSD:*)            # covers RT/PC BSD and
 	echo romp-ibm-bsd${UNAME_RELEASE}   # 4.3 with uname added to
-	exit 0 ;;                           # report: romp-ibm BSD 4.3
+	exit ;;                             # report: romp-ibm BSD 4.3
     *:BOSX:*:*)
 	echo rs6000-bull-bosx
-	exit 0 ;;
+	exit ;;
     DPX/2?00:B.O.S.:*:*)
 	echo m68k-bull-sysv3
-	exit 0 ;;
+	exit ;;
     9000/[34]??:4.3bsd:1.*:*)
 	echo m68k-hp-bsd
-	exit 0 ;;
+	exit ;;
     hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
 	echo m68k-hp-bsd4.4
-	exit 0 ;;
+	exit ;;
     9000/[34678]??:HP-UX:*:*)
 	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
 	case "${UNAME_MACHINE}" in
@@ -592,52 +615,52 @@
 	    9000/[678][0-9][0-9])
 		if [ -x /usr/bin/getconf ]; then
 		    sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
-                    sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
-                    case "${sc_cpu_version}" in
-                      523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
-                      528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
-                      532)                      # CPU_PA_RISC2_0
-                        case "${sc_kernel_bits}" in
-                          32) HP_ARCH="hppa2.0n" ;;
-                          64) HP_ARCH="hppa2.0w" ;;
+		    sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
+		    case "${sc_cpu_version}" in
+		      523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
+		      528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
+		      532)                      # CPU_PA_RISC2_0
+			case "${sc_kernel_bits}" in
+			  32) HP_ARCH="hppa2.0n" ;;
+			  64) HP_ARCH="hppa2.0w" ;;
 			  '') HP_ARCH="hppa2.0" ;;   # HP-UX 10.20
-                        esac ;;
-                    esac
+			esac ;;
+		    esac
 		fi
 		if [ "${HP_ARCH}" = "" ]; then
 		    eval $set_cc_for_build
-		    sed 's/^              //' << EOF >$dummy.c
+		    sed 's/^		//' << EOF >$dummy.c
 
-              #define _HPUX_SOURCE
-              #include <stdlib.h>
-              #include <unistd.h>
+		#define _HPUX_SOURCE
+		#include <stdlib.h>
+		#include <unistd.h>
 
-              int main ()
-              {
-              #if defined(_SC_KERNEL_BITS)
-                  long bits = sysconf(_SC_KERNEL_BITS);
-              #endif
-                  long cpu  = sysconf (_SC_CPU_VERSION);
+		int main ()
+		{
+		#if defined(_SC_KERNEL_BITS)
+		    long bits = sysconf(_SC_KERNEL_BITS);
+		#endif
+		    long cpu  = sysconf (_SC_CPU_VERSION);
 
-                  switch (cpu)
-              	{
-              	case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
-              	case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
-              	case CPU_PA_RISC2_0:
-              #if defined(_SC_KERNEL_BITS)
-              	    switch (bits)
-              		{
-              		case 64: puts ("hppa2.0w"); break;
-              		case 32: puts ("hppa2.0n"); break;
-              		default: puts ("hppa2.0"); break;
-              		} break;
-              #else  /* !defined(_SC_KERNEL_BITS) */
-              	    puts ("hppa2.0"); break;
-              #endif
-              	default: puts ("hppa1.0"); break;
-              	}
-                  exit (0);
-              }
+		    switch (cpu)
+			{
+			case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
+			case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
+			case CPU_PA_RISC2_0:
+		#if defined(_SC_KERNEL_BITS)
+			    switch (bits)
+				{
+				case 64: puts ("hppa2.0w"); break;
+				case 32: puts ("hppa2.0n"); break;
+				default: puts ("hppa2.0"); break;
+				} break;
+		#else  /* !defined(_SC_KERNEL_BITS) */
+			    puts ("hppa2.0"); break;
+		#endif
+			default: puts ("hppa1.0"); break;
+			}
+		    exit (0);
+		}
 EOF
 		    (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
 		    test -z "$HP_ARCH" && HP_ARCH=hppa
@@ -645,9 +668,19 @@
 	esac
 	if [ ${HP_ARCH} = "hppa2.0w" ]
 	then
-	    # avoid double evaluation of $set_cc_for_build
-	    test -n "$CC_FOR_BUILD" || eval $set_cc_for_build
-	    if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E -) | grep __LP64__ >/dev/null
+	    eval $set_cc_for_build
+
+	    # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating
+	    # 32-bit code.  hppa64-hp-hpux* has the same kernel and a compiler
+	    # generating 64-bit code.  GNU and HP use different nomenclature:
+	    #
+	    # $ CC_FOR_BUILD=cc ./config.guess
+	    # => hppa2.0w-hp-hpux11.23
+	    # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess
+	    # => hppa64-hp-hpux11.23
+
+	    if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) |
+		grep -q __LP64__
 	    then
 		HP_ARCH="hppa2.0w"
 	    else
@@ -655,11 +688,11 @@
 	    fi
 	fi
 	echo ${HP_ARCH}-hp-hpux${HPUX_REV}
-	exit 0 ;;
+	exit ;;
     ia64:HP-UX:*:*)
 	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
 	echo ia64-hp-hpux${HPUX_REV}
-	exit 0 ;;
+	exit ;;
     3050*:HI-UX:*:*)
 	eval $set_cc_for_build
 	sed 's/^	//' << EOF >$dummy.c
@@ -687,24 +720,25 @@
 	  exit (0);
 	}
 EOF
-	$CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0
+	$CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` &&
+		{ echo "$SYSTEM_NAME"; exit; }
 	echo unknown-hitachi-hiuxwe2
-	exit 0 ;;
+	exit ;;
     9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
 	echo hppa1.1-hp-bsd
-	exit 0 ;;
+	exit ;;
     9000/8??:4.3bsd:*:*)
 	echo hppa1.0-hp-bsd
-	exit 0 ;;
+	exit ;;
     *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
 	echo hppa1.0-hp-mpeix
-	exit 0 ;;
+	exit ;;
     hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
 	echo hppa1.1-hp-osf
-	exit 0 ;;
+	exit ;;
     hp8??:OSF1:*:*)
 	echo hppa1.0-hp-osf
-	exit 0 ;;
+	exit ;;
     i*86:OSF1:*:*)
 	if [ -x /usr/sbin/sysversion ] ; then
 	    echo ${UNAME_MACHINE}-unknown-osf1mk
@@ -711,308 +745,320 @@
 	else
 	    echo ${UNAME_MACHINE}-unknown-osf1
 	fi
-	exit 0 ;;
+	exit ;;
     parisc*:Lites*:*:*)
 	echo hppa1.1-hp-lites
-	exit 0 ;;
+	exit ;;
     C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
 	echo c1-convex-bsd
-        exit 0 ;;
+	exit ;;
     C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
 	if getsysinfo -f scalar_acc
 	then echo c32-convex-bsd
 	else echo c2-convex-bsd
 	fi
-        exit 0 ;;
+	exit ;;
     C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
 	echo c34-convex-bsd
-        exit 0 ;;
+	exit ;;
     C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
 	echo c38-convex-bsd
-        exit 0 ;;
+	exit ;;
     C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
 	echo c4-convex-bsd
-        exit 0 ;;
+	exit ;;
     CRAY*Y-MP:*:*:*)
 	echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-	exit 0 ;;
+	exit ;;
     CRAY*[A-Z]90:*:*:*)
 	echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
 	| sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
 	      -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
 	      -e 's/\.[^.]*$/.X/'
-	exit 0 ;;
+	exit ;;
     CRAY*TS:*:*:*)
 	echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-	exit 0 ;;
+	exit ;;
     CRAY*T3E:*:*:*)
 	echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-	exit 0 ;;
+	exit ;;
     CRAY*SV1:*:*:*)
 	echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-	exit 0 ;;
+	exit ;;
     *:UNICOS/mp:*:*)
 	echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-	exit 0 ;;
+	exit ;;
     F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
 	FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
-        FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
-        FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
-        echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
-        exit 0 ;;
+	FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+	FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
+	echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+	exit ;;
     5000:UNIX_System_V:4.*:*)
-        FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
-        FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
-        echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
-	exit 0 ;;
+	FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+	FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
+	echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+	exit ;;
     i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
 	echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     sparc*:BSD/OS:*:*)
 	echo sparc-unknown-bsdi${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     *:BSD/OS:*:*)
 	echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     *:FreeBSD:*:*)
-	echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
-	exit 0 ;;
+	UNAME_PROCESSOR=`/usr/bin/uname -p`
+	case ${UNAME_PROCESSOR} in
+	    amd64)
+		echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+	    *)
+		echo ${UNAME_PROCESSOR}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+	esac
+	exit ;;
     i*:CYGWIN*:*)
 	echo ${UNAME_MACHINE}-pc-cygwin
-	exit 0 ;;
-    i*:MINGW*:*)
+	exit ;;
+    *:MINGW64*:*)
+	echo ${UNAME_MACHINE}-pc-mingw64
+	exit ;;
+    *:MINGW*:*)
 	echo ${UNAME_MACHINE}-pc-mingw32
-	exit 0 ;;
+	exit ;;
+    i*:MSYS*:*)
+	echo ${UNAME_MACHINE}-pc-msys
+	exit ;;
+    i*:windows32*:*)
+	# uname -m includes "-pc" on this system.
+	echo ${UNAME_MACHINE}-mingw32
+	exit ;;
     i*:PW*:*)
 	echo ${UNAME_MACHINE}-pc-pw32
-	exit 0 ;;
-    x86:Interix*:[34]*)
-	echo i586-pc-interix${UNAME_RELEASE}|sed -e 's/\..*//'
-	exit 0 ;;
+	exit ;;
+    *:Interix*:*)
+	case ${UNAME_MACHINE} in
+	    x86)
+		echo i586-pc-interix${UNAME_RELEASE}
+		exit ;;
+	    authenticamd | genuineintel | EM64T)
+		echo x86_64-unknown-interix${UNAME_RELEASE}
+		exit ;;
+	    IA64)
+		echo ia64-unknown-interix${UNAME_RELEASE}
+		exit ;;
+	esac ;;
     [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
 	echo i${UNAME_MACHINE}-pc-mks
-	exit 0 ;;
+	exit ;;
+    8664:Windows_NT:*)
+	echo x86_64-pc-mks
+	exit ;;
     i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
 	# How do we know it's Interix rather than the generic POSIX subsystem?
 	# It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
 	# UNAME_MACHINE based on the output of uname instead of i386?
 	echo i586-pc-interix
-	exit 0 ;;
+	exit ;;
     i*:UWIN*:*)
 	echo ${UNAME_MACHINE}-pc-uwin
-	exit 0 ;;
+	exit ;;
+    amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*)
+	echo x86_64-unknown-cygwin
+	exit ;;
     p*:CYGWIN*:*)
 	echo powerpcle-unknown-cygwin
-	exit 0 ;;
+	exit ;;
     prep*:SunOS:5.*:*)
 	echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit 0 ;;
+	exit ;;
     *:GNU:*:*)
 	# the GNU system
-	echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
-	exit 0 ;;
+	echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-${LIBC}`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
+	exit ;;
     *:GNU/*:*:*)
 	# other systems with GNU libc and userland
-	echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu
-	exit 0 ;;
+	echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-${LIBC}
+	exit ;;
     i*86:Minix:*:*)
 	echo ${UNAME_MACHINE}-pc-minix
-	exit 0 ;;
+	exit ;;
+    aarch64:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    aarch64_be:Linux:*:*)
+	UNAME_MACHINE=aarch64_be
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    alpha:Linux:*:*)
+	case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
+	  EV5)   UNAME_MACHINE=alphaev5 ;;
+	  EV56)  UNAME_MACHINE=alphaev56 ;;
+	  PCA56) UNAME_MACHINE=alphapca56 ;;
+	  PCA57) UNAME_MACHINE=alphapca56 ;;
+	  EV6)   UNAME_MACHINE=alphaev6 ;;
+	  EV67)  UNAME_MACHINE=alphaev67 ;;
+	  EV68*) UNAME_MACHINE=alphaev68 ;;
+	esac
+	objdump --private-headers /bin/sh | grep -q ld.so.1
+	if test "$?" = 0 ; then LIBC="gnulibc1" ; fi
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    arc:Linux:*:* | arceb:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
     arm*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit 0 ;;
+	eval $set_cc_for_build
+	if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \
+	    | grep -q __ARM_EABI__
+	then
+	    echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	else
+	    if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \
+		| grep -q __ARM_PCS_VFP
+	    then
+		echo ${UNAME_MACHINE}-unknown-linux-${LIBC}eabi
+	    else
+		echo ${UNAME_MACHINE}-unknown-linux-${LIBC}eabihf
+	    fi
+	fi
+	exit ;;
+    avr32*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
     cris:Linux:*:*)
-	echo cris-axis-linux-gnu
-	exit 0 ;;
+	echo ${UNAME_MACHINE}-axis-linux-${LIBC}
+	exit ;;
     crisv32:Linux:*:*)
-	echo crisv32-axis-linux-gnu
-	exit 0 ;;
+	echo ${UNAME_MACHINE}-axis-linux-${LIBC}
+	exit ;;
     frv:Linux:*:*)
-    	echo frv-unknown-linux-gnu
-	exit 0 ;;
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    hexagon:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    i*86:Linux:*:*)
+	echo ${UNAME_MACHINE}-pc-linux-${LIBC}
+	exit ;;
     ia64:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit 0 ;;
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
     m32r*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit 0 ;;
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
     m68*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit 0 ;;
-    mips:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    mips:Linux:*:* | mips64:Linux:*:*)
 	eval $set_cc_for_build
 	sed 's/^	//' << EOF >$dummy.c
 	#undef CPU
-	#undef mips
-	#undef mipsel
+	#undef ${UNAME_MACHINE}
+	#undef ${UNAME_MACHINE}el
 	#if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
-	CPU=mipsel
+	CPU=${UNAME_MACHINE}el
 	#else
 	#if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
-	CPU=mips
+	CPU=${UNAME_MACHINE}
 	#else
 	CPU=
 	#endif
 	#endif
 EOF
-	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
-	test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0
+	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'`
+	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-${LIBC}"; exit; }
 	;;
-    mips64:Linux:*:*)
-	eval $set_cc_for_build
-	sed 's/^	//' << EOF >$dummy.c
-	#undef CPU
-	#undef mips64
-	#undef mips64el
-	#if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
-	CPU=mips64el
-	#else
-	#if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
-	CPU=mips64
-	#else
-	CPU=
-	#endif
-	#endif
-EOF
-	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
-	test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0
-	;;
-    ppc:Linux:*:*)
-	echo powerpc-unknown-linux-gnu
-	exit 0 ;;
-    ppc64:Linux:*:*)
-	echo powerpc64-unknown-linux-gnu
-	exit 0 ;;
-    alpha:Linux:*:*)
-	case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
-	  EV5)   UNAME_MACHINE=alphaev5 ;;
-	  EV56)  UNAME_MACHINE=alphaev56 ;;
-	  PCA56) UNAME_MACHINE=alphapca56 ;;
-	  PCA57) UNAME_MACHINE=alphapca56 ;;
-	  EV6)   UNAME_MACHINE=alphaev6 ;;
-	  EV67)  UNAME_MACHINE=alphaev67 ;;
-	  EV68*) UNAME_MACHINE=alphaev68 ;;
-        esac
-	objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null
-	if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
-	echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
-	exit 0 ;;
+    or1k:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    or32:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    padre:Linux:*:*)
+	echo sparc-unknown-linux-${LIBC}
+	exit ;;
+    parisc64:Linux:*:* | hppa64:Linux:*:*)
+	echo hppa64-unknown-linux-${LIBC}
+	exit ;;
     parisc:Linux:*:* | hppa:Linux:*:*)
 	# Look for CPU level
 	case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
-	  PA7*) echo hppa1.1-unknown-linux-gnu ;;
-	  PA8*) echo hppa2.0-unknown-linux-gnu ;;
-	  *)    echo hppa-unknown-linux-gnu ;;
+	  PA7*) echo hppa1.1-unknown-linux-${LIBC} ;;
+	  PA8*) echo hppa2.0-unknown-linux-${LIBC} ;;
+	  *)    echo hppa-unknown-linux-${LIBC} ;;
 	esac
-	exit 0 ;;
-    parisc64:Linux:*:* | hppa64:Linux:*:*)
-	echo hppa64-unknown-linux-gnu
-	exit 0 ;;
+	exit ;;
+    ppc64:Linux:*:*)
+	echo powerpc64-unknown-linux-${LIBC}
+	exit ;;
+    ppc:Linux:*:*)
+	echo powerpc-unknown-linux-${LIBC}
+	exit ;;
+    ppc64le:Linux:*:*)
+	echo powerpc64le-unknown-linux-${LIBC}
+	exit ;;
+    ppcle:Linux:*:*)
+	echo powerpcle-unknown-linux-${LIBC}
+	exit ;;
     s390:Linux:*:* | s390x:Linux:*:*)
-	echo ${UNAME_MACHINE}-ibm-linux
-	exit 0 ;;
+	echo ${UNAME_MACHINE}-ibm-linux-${LIBC}
+	exit ;;
     sh64*:Linux:*:*)
-    	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit 0 ;;
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
     sh*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit 0 ;;
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
     sparc:Linux:*:* | sparc64:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit 0 ;;
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    tile*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    vax:Linux:*:*)
+	echo ${UNAME_MACHINE}-dec-linux-${LIBC}
+	exit ;;
     x86_64:Linux:*:*)
-	echo x86_64-unknown-linux-gnu
-	exit 0 ;;
-    i*86:Linux:*:*)
-	# The BFD linker knows what the default object file format is, so
-	# first see if it will tell us. cd to the root directory to prevent
-	# problems with other programs or directories called `ld' in the path.
-	# Set LC_ALL=C to ensure ld outputs messages in English.
-	ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \
-			 | sed -ne '/supported targets:/!d
-				    s/[ 	][ 	]*/ /g
-				    s/.*supported targets: *//
-				    s/ .*//
-				    p'`
-        case "$ld_supported_targets" in
-	  elf32-i386)
-		TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu"
-		;;
-	  a.out-i386-linux)
-		echo "${UNAME_MACHINE}-pc-linux-gnuaout"
-		exit 0 ;;
-	  coff-i386)
-		echo "${UNAME_MACHINE}-pc-linux-gnucoff"
-		exit 0 ;;
-	  "")
-		# Either a pre-BFD a.out linker (linux-gnuoldld) or
-		# one that does not give us useful --help.
-		echo "${UNAME_MACHINE}-pc-linux-gnuoldld"
-		exit 0 ;;
-	esac
-	# Determine whether the default compiler is a.out or elf
-	eval $set_cc_for_build
-	sed 's/^	//' << EOF >$dummy.c
-	#include <features.h>
-	#ifdef __ELF__
-	# ifdef __GLIBC__
-	#  if __GLIBC__ >= 2
-	LIBC=gnu
-	#  else
-	LIBC=gnulibc1
-	#  endif
-	# else
-	LIBC=gnulibc1
-	# endif
-	#else
-	#ifdef __INTEL_COMPILER
-	LIBC=gnu
-	#else
-	LIBC=gnuaout
-	#endif
-	#endif
-	#ifdef __dietlibc__
-	LIBC=dietlibc
-	#endif
-EOF
-	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=`
-	test x"${LIBC}" != x && echo "${UNAME_MACHINE}-pc-linux-${LIBC}" && exit 0
-	test x"${TENTATIVE}" != x && echo "${TENTATIVE}" && exit 0
-	;;
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    xtensa*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
     i*86:DYNIX/ptx:4*:*)
 	# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
 	# earlier versions are messed up and put the nodename in both
 	# sysname and nodename.
 	echo i386-sequent-sysv4
-	exit 0 ;;
+	exit ;;
     i*86:UNIX_SV:4.2MP:2.*)
-        # Unixware is an offshoot of SVR4, but it has its own version
-        # number series starting with 2...
-        # I am not positive that other SVR4 systems won't match this,
+	# Unixware is an offshoot of SVR4, but it has its own version
+	# number series starting with 2...
+	# I am not positive that other SVR4 systems won't match this,
 	# I just have to hope.  -- rms.
-        # Use sysv4.2uw... so that sysv4* matches it.
+	# Use sysv4.2uw... so that sysv4* matches it.
 	echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
-	exit 0 ;;
+	exit ;;
     i*86:OS/2:*:*)
 	# If we were able to find `uname', then EMX Unix compatibility
 	# is probably installed.
 	echo ${UNAME_MACHINE}-pc-os2-emx
-	exit 0 ;;
+	exit ;;
     i*86:XTS-300:*:STOP)
 	echo ${UNAME_MACHINE}-unknown-stop
-	exit 0 ;;
+	exit ;;
     i*86:atheos:*:*)
 	echo ${UNAME_MACHINE}-unknown-atheos
-	exit 0 ;;
-	i*86:syllable:*:*)
+	exit ;;
+    i*86:syllable:*:*)
 	echo ${UNAME_MACHINE}-pc-syllable
-	exit 0 ;;
-    i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*)
+	exit ;;
+    i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*)
 	echo i386-unknown-lynxos${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     i*86:*DOS:*:*)
 	echo ${UNAME_MACHINE}-pc-msdosdjgpp
-	exit 0 ;;
+	exit ;;
     i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
 	UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
 	if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
@@ -1020,8 +1066,9 @@
 	else
 		echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
 	fi
-	exit 0 ;;
-    i*86:*:5:[78]*)
+	exit ;;
+    i*86:*:5:[678]*)
+	# UnixWare 7.x, OpenUNIX and OpenServer 6.
 	case `/bin/uname -X | grep "^Machine"` in
 	    *486*)	     UNAME_MACHINE=i486 ;;
 	    *Pentium)	     UNAME_MACHINE=i586 ;;
@@ -1028,7 +1075,7 @@
 	    *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
 	esac
 	echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
-	exit 0 ;;
+	exit ;;
     i*86:*:3.2:*)
 	if test -f /usr/options/cb.name; then
 		UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
@@ -1046,19 +1093,22 @@
 	else
 		echo ${UNAME_MACHINE}-pc-sysv32
 	fi
-	exit 0 ;;
+	exit ;;
     pc:*:*:*)
 	# Left here for compatibility:
-        # uname -m prints for DJGPP always 'pc', but it prints nothing about
-        # the processor, so we play safe by assuming i386.
-	echo i386-pc-msdosdjgpp
-        exit 0 ;;
+	# uname -m prints for DJGPP always 'pc', but it prints nothing about
+	# the processor, so we play safe by assuming i586.
+	# Note: whatever this is, it MUST be the same as what config.sub
+	# prints for the "djgpp" host, or else GDB configury will decide that
+	# this is a cross-build.
+	echo i586-pc-msdosdjgpp
+	exit ;;
     Intel:Mach:3*:*)
 	echo i386-pc-mach3
-	exit 0 ;;
+	exit ;;
     paragon:*:*:*)
 	echo i860-intel-osf1
-	exit 0 ;;
+	exit ;;
     i860:*:4.*:*) # i860-SVR4
 	if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
 	  echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
@@ -1065,54 +1115,64 @@
 	else # Add other i860-SVR4 vendors below as they are discovered.
 	  echo i860-unknown-sysv${UNAME_RELEASE}  # Unknown i860-SVR4
 	fi
-	exit 0 ;;
+	exit ;;
     mini*:CTIX:SYS*5:*)
 	# "miniframe"
 	echo m68010-convergent-sysv
-	exit 0 ;;
+	exit ;;
     mc68k:UNIX:SYSTEM5:3.51m)
 	echo m68k-convergent-sysv
-	exit 0 ;;
+	exit ;;
     M680?0:D-NIX:5.3:*)
 	echo m68k-diab-dnix
-	exit 0 ;;
+	exit ;;
     M68*:*:R3V[5678]*:*)
-	test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;;
+	test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;;
     3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0)
 	OS_REL=''
 	test -r /etc/.relid \
 	&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
 	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
-	  && echo i486-ncr-sysv4.3${OS_REL} && exit 0
+	  && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
 	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
-	  && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;;
+	  && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
     3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
-        /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
-          && echo i486-ncr-sysv4 && exit 0 ;;
+	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+	  && { echo i486-ncr-sysv4; exit; } ;;
+    NCR*:*:4.2:* | MPRAS*:*:4.2:*)
+	OS_REL='.3'
+	test -r /etc/.relid \
+	    && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
+	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+	    && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
+	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+	    && { echo i586-ncr-sysv4.3${OS_REL}; exit; }
+	/bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \
+	    && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
     m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
 	echo m68k-unknown-lynxos${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     mc68030:UNIX_System_V:4.*:*)
 	echo m68k-atari-sysv4
-	exit 0 ;;
+	exit ;;
     TSUNAMI:LynxOS:2.*:*)
 	echo sparc-unknown-lynxos${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     rs6000:LynxOS:2.*:*)
 	echo rs6000-unknown-lynxos${UNAME_RELEASE}
-	exit 0 ;;
-    PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*)
+	exit ;;
+    PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*)
 	echo powerpc-unknown-lynxos${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     SM[BE]S:UNIX_SV:*:*)
 	echo mips-dde-sysv${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     RM*:ReliantUNIX-*:*:*)
 	echo mips-sni-sysv4
-	exit 0 ;;
+	exit ;;
     RM*:SINIX-*:*:*)
 	echo mips-sni-sysv4
-	exit 0 ;;
+	exit ;;
     *:SINIX-*:*:*)
 	if uname -p 2>/dev/null >/dev/null ; then
 		UNAME_MACHINE=`(uname -p) 2>/dev/null`
@@ -1120,69 +1180,109 @@
 	else
 		echo ns32k-sni-sysv
 	fi
-	exit 0 ;;
-    PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
-                      # says <Richard.M.Bartel at ccMail.Census.GOV>
-        echo i586-unisys-sysv4
-        exit 0 ;;
+	exit ;;
+    PENTIUM:*:4.0*:*)	# Unisys `ClearPath HMP IX 4000' SVR4/MP effort
+			# says <Richard.M.Bartel at ccMail.Census.GOV>
+	echo i586-unisys-sysv4
+	exit ;;
     *:UNIX_System_V:4*:FTX*)
 	# From Gerald Hewes <hewes at openmarket.com>.
 	# How about differentiating between stratus architectures? -djm
 	echo hppa1.1-stratus-sysv4
-	exit 0 ;;
+	exit ;;
     *:*:*:FTX*)
 	# From seanf at swdc.stratus.com.
 	echo i860-stratus-sysv4
-	exit 0 ;;
+	exit ;;
+    i*86:VOS:*:*)
+	# From Paul.Green at stratus.com.
+	echo ${UNAME_MACHINE}-stratus-vos
+	exit ;;
     *:VOS:*:*)
 	# From Paul.Green at stratus.com.
 	echo hppa1.1-stratus-vos
-	exit 0 ;;
+	exit ;;
     mc68*:A/UX:*:*)
 	echo m68k-apple-aux${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     news*:NEWS-OS:6*:*)
 	echo mips-sony-newsos6
-	exit 0 ;;
+	exit ;;
     R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
 	if [ -d /usr/nec ]; then
-	        echo mips-nec-sysv${UNAME_RELEASE}
+		echo mips-nec-sysv${UNAME_RELEASE}
 	else
-	        echo mips-unknown-sysv${UNAME_RELEASE}
+		echo mips-unknown-sysv${UNAME_RELEASE}
 	fi
-        exit 0 ;;
+	exit ;;
     BeBox:BeOS:*:*)	# BeOS running on hardware made by Be, PPC only.
 	echo powerpc-be-beos
-	exit 0 ;;
+	exit ;;
     BeMac:BeOS:*:*)	# BeOS running on Mac or Mac clone, PPC only.
 	echo powerpc-apple-beos
-	exit 0 ;;
+	exit ;;
     BePC:BeOS:*:*)	# BeOS running on Intel PC compatible.
 	echo i586-pc-beos
-	exit 0 ;;
+	exit ;;
+    BePC:Haiku:*:*)	# Haiku running on Intel PC compatible.
+	echo i586-pc-haiku
+	exit ;;
+    x86_64:Haiku:*:*)
+	echo x86_64-unknown-haiku
+	exit ;;
     SX-4:SUPER-UX:*:*)
 	echo sx4-nec-superux${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     SX-5:SUPER-UX:*:*)
 	echo sx5-nec-superux${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     SX-6:SUPER-UX:*:*)
 	echo sx6-nec-superux${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
+    SX-7:SUPER-UX:*:*)
+	echo sx7-nec-superux${UNAME_RELEASE}
+	exit ;;
+    SX-8:SUPER-UX:*:*)
+	echo sx8-nec-superux${UNAME_RELEASE}
+	exit ;;
+    SX-8R:SUPER-UX:*:*)
+	echo sx8r-nec-superux${UNAME_RELEASE}
+	exit ;;
     Power*:Rhapsody:*:*)
 	echo powerpc-apple-rhapsody${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     *:Rhapsody:*:*)
 	echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     *:Darwin:*:*)
 	UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
-	case $UNAME_PROCESSOR in
-	    *86) UNAME_PROCESSOR=i686 ;;
-	    unknown) UNAME_PROCESSOR=powerpc ;;
-	esac
+	eval $set_cc_for_build
+	if test "$UNAME_PROCESSOR" = unknown ; then
+	    UNAME_PROCESSOR=powerpc
+	fi
+	if test `echo "$UNAME_RELEASE" | sed -e 's/\..*//'` -le 10 ; then
+	    if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
+		if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \
+		    (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
+		    grep IS_64BIT_ARCH >/dev/null
+		then
+		    case $UNAME_PROCESSOR in
+			i386) UNAME_PROCESSOR=x86_64 ;;
+			powerpc) UNAME_PROCESSOR=powerpc64 ;;
+		    esac
+		fi
+	    fi
+	elif test "$UNAME_PROCESSOR" = i386 ; then
+	    # Avoid executing cc on OS X 10.9, as it ships with a stub
+	    # that puts up a graphical alert prompting to install
+	    # developer tools.  Any system running Mac OS X 10.7 or
+	    # later (Darwin 11 and later) is required to have a 64-bit
+	    # processor. This is not true of the ARM version of Darwin
+	    # that Apple uses in portable devices.
+	    UNAME_PROCESSOR=x86_64
+	fi
 	echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     *:procnto*:*:* | *:QNX:[0123456789]*:*)
 	UNAME_PROCESSOR=`uname -p`
 	if test "$UNAME_PROCESSOR" = "x86"; then
@@ -1190,22 +1290,28 @@
 		UNAME_MACHINE=pc
 	fi
 	echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     *:QNX:*:4*)
 	echo i386-pc-qnx
-	exit 0 ;;
+	exit ;;
+    NEO-?:NONSTOP_KERNEL:*:*)
+	echo neo-tandem-nsk${UNAME_RELEASE}
+	exit ;;
+    NSE-*:NONSTOP_KERNEL:*:*)
+	echo nse-tandem-nsk${UNAME_RELEASE}
+	exit ;;
     NSR-?:NONSTOP_KERNEL:*:*)
 	echo nsr-tandem-nsk${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     *:NonStop-UX:*:*)
 	echo mips-compaq-nonstopux
-	exit 0 ;;
+	exit ;;
     BS2000:POSIX*:*:*)
 	echo bs2000-siemens-sysv
-	exit 0 ;;
+	exit ;;
     DS/*:UNIX_System_V:*:*)
 	echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     *:Plan9:*:*)
 	# "uname -m" is not consistent, so use $cputype instead. 386
 	# is converted to i386 for consistency with other x86
@@ -1216,43 +1322,55 @@
 	    UNAME_MACHINE="$cputype"
 	fi
 	echo ${UNAME_MACHINE}-unknown-plan9
-	exit 0 ;;
+	exit ;;
     *:TOPS-10:*:*)
 	echo pdp10-unknown-tops10
-	exit 0 ;;
+	exit ;;
     *:TENEX:*:*)
 	echo pdp10-unknown-tenex
-	exit 0 ;;
+	exit ;;
     KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
 	echo pdp10-dec-tops20
-	exit 0 ;;
+	exit ;;
     XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
 	echo pdp10-xkl-tops20
-	exit 0 ;;
+	exit ;;
     *:TOPS-20:*:*)
 	echo pdp10-unknown-tops20
-	exit 0 ;;
+	exit ;;
     *:ITS:*:*)
 	echo pdp10-unknown-its
-	exit 0 ;;
+	exit ;;
     SEI:*:*:SEIUX)
-        echo mips-sei-seiux${UNAME_RELEASE}
-	exit 0 ;;
+	echo mips-sei-seiux${UNAME_RELEASE}
+	exit ;;
     *:DragonFly:*:*)
 	echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
-	exit 0 ;;
+	exit ;;
     *:*VMS:*:*)
-    	UNAME_MACHINE=`(uname -p) 2>/dev/null`
+	UNAME_MACHINE=`(uname -p) 2>/dev/null`
 	case "${UNAME_MACHINE}" in
-	    A*) echo alpha-dec-vms && exit 0 ;;
-	    I*) echo ia64-dec-vms && exit 0 ;;
-	    V*) echo vax-dec-vms && exit 0 ;;
-	esac
+	    A*) echo alpha-dec-vms ; exit ;;
+	    I*) echo ia64-dec-vms ; exit ;;
+	    V*) echo vax-dec-vms ; exit ;;
+	esac ;;
+    *:XENIX:*:SysV)
+	echo i386-pc-xenix
+	exit ;;
+    i*86:skyos:*:*)
+	echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//'
+	exit ;;
+    i*86:rdos:*:*)
+	echo ${UNAME_MACHINE}-pc-rdos
+	exit ;;
+    i*86:AROS:*:*)
+	echo ${UNAME_MACHINE}-pc-aros
+	exit ;;
+    x86_64:VMkernel:*:*)
+	echo ${UNAME_MACHINE}-unknown-esx
+	exit ;;
 esac
 
-#echo '(No uname command or uname output not recognized.)' 1>&2
-#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
-
 eval $set_cc_for_build
 cat >$dummy.c <<EOF
 #ifdef _SEQUENT_
@@ -1270,16 +1388,16 @@
 #include <sys/param.h>
   printf ("m68k-sony-newsos%s\n",
 #ifdef NEWSOS4
-          "4"
+	"4"
 #else
-	  ""
+	""
 #endif
-         ); exit (0);
+	); exit (0);
 #endif
 #endif
 
 #if defined (__arm) && defined (__acorn) && defined (__unix)
-  printf ("arm-acorn-riscix"); exit (0);
+  printf ("arm-acorn-riscix\n"); exit (0);
 #endif
 
 #if defined (hp300) && !defined (hpux)
@@ -1368,11 +1486,12 @@
 }
 EOF
 
-$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && $dummy && exit 0
+$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` &&
+	{ echo "$SYSTEM_NAME"; exit; }
 
 # Apollos put the system type in the environment.
 
-test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; }
+test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; }
 
 # Convex versions that predate uname can use getsysinfo(1)
 
@@ -1381,22 +1500,22 @@
     case `getsysinfo -f cpu_type` in
     c1*)
 	echo c1-convex-bsd
-	exit 0 ;;
+	exit ;;
     c2*)
 	if getsysinfo -f scalar_acc
 	then echo c32-convex-bsd
 	else echo c2-convex-bsd
 	fi
-	exit 0 ;;
+	exit ;;
     c34*)
 	echo c34-convex-bsd
-	exit 0 ;;
+	exit ;;
     c38*)
 	echo c38-convex-bsd
-	exit 0 ;;
+	exit ;;
     c4*)
 	echo c4-convex-bsd
-	exit 0 ;;
+	exit ;;
     esac
 fi
 
@@ -1407,7 +1526,9 @@
 the operating system you are using. It is advised that you
 download the most up to date version of the config scripts from
 
-    ftp://ftp.gnu.org/pub/gnu/config/
+  http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
+and
+  http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
 
 If the version you run ($0) is already up to date, please
 send the following data and any information you think might be

Deleted: vendor/bind/dist/config.h.in
===================================================================
--- vendor/bind/dist/config.h.in	2016-11-03 12:21:01 UTC (rev 9202)
+++ vendor/bind/dist/config.h.in	2016-11-03 12:22:00 UTC (rev 9203)
@@ -1,454 +0,0 @@
-/* config.h.in.  Generated from configure.in by autoheader.  */
-/*
- * Copyright (C) 2004, 2005, 2007, 2008, 2012  Internet Systems Consortium, Inc. ("ISC")
- * Copyright (C) 1999-2003  Internet Software Consortium.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
- */
-
-/* $Id: config.h.in,v 1.1.1.1 2013-08-22 22:51:51 laffer1 Exp $ */
-
-/*! \file */
-
-/***
- *** This file is not to be included by any public header files, because
- *** it does not get installed.
- ***/
-
-/** define on DEC OSF to enable 4.4BSD style sa_len support */
-#undef _SOCKADDR_LEN
-
-/** define if your system needs pthread_init() before using pthreads */
-#undef NEED_PTHREAD_INIT
-
-/** define if your system has sigwait() */
-#undef HAVE_SIGWAIT
-
-/** define if sigwait() is the UnixWare flavor */
-#undef HAVE_UNIXWARE_SIGWAIT
-
-/** define on Solaris to get sigwait() to work using pthreads semantics */
-#undef _POSIX_PTHREAD_SEMANTICS
-
-/** define if LinuxThreads is in use */
-#undef HAVE_LINUXTHREADS
-
-/** define if sysconf() is available */
-#undef HAVE_SYSCONF
-
-/** define if sysctlbyname() is available */
-#undef HAVE_SYSCTLBYNAME
-
-/** define if catgets() is available */
-#undef HAVE_CATGETS
-
-/** define if getifaddrs() exists */
-#undef HAVE_GETIFADDRS
-
-/** define if you have the NET_RT_IFLIST sysctl variable and sys/sysctl.h */
-#undef HAVE_IFLIST_SYSCTL
-
-/** define if tzset() is available */
-#undef HAVE_TZSET
-
-/** define if struct addrinfo exists */
-#undef HAVE_ADDRINFO
-
-/** define if getaddrinfo() exists */
-#undef HAVE_GETADDRINFO
-
-/** define if gai_strerror() exists */
-#undef HAVE_GAISTRERROR
-
-/** define if arc4random() exists */
-#undef HAVE_ARC4RANDOM
-
-/**
- * define if pthread_setconcurrency() should be called to tell the
- * OS how many threads we might want to run.
- */
-#undef CALL_PTHREAD_SETCONCURRENCY
-
-/** define if IPv6 is not disabled */
-#undef WANT_IPV6
-
-/** define if flockfile() is available */
-#undef HAVE_FLOCKFILE
-
-/** define if getc_unlocked() is available */
-#undef HAVE_GETCUNLOCKED
-
-/** Shut up warnings about sputaux in stdio.h on BSD/OS pre-4.1 */
-#undef SHUTUP_SPUTAUX
-#ifdef SHUTUP_SPUTAUX
-struct __sFILE;
-extern __inline int __sputaux(int _c, struct __sFILE *_p);
-#endif
-
-/** Shut up warnings about missing sigwait prototype on BSD/OS 4.0* */
-#undef SHUTUP_SIGWAIT
-#ifdef SHUTUP_SIGWAIT
-int sigwait(const unsigned int *set, int *sig);
-#endif
-
-/** Shut up warnings from gcc -Wcast-qual on BSD/OS 4.1. */
-#undef SHUTUP_STDARG_CAST
-#if defined(SHUTUP_STDARG_CAST) && defined(__GNUC__)
-#include <stdarg.h>		/** Grr.  Must be included *every time*. */
-/**
- * The silly continuation line is to keep configure from
- * commenting out the #undef.
- */
-
-#undef \
-	va_start
-#define	va_start(ap, last) \
-	do { \
-		union { const void *konst; long *var; } _u; \
-		_u.konst = &(last); \
-		ap = (va_list)(_u.var + __va_words(__typeof(last))); \
-	} while (0)
-#endif /** SHUTUP_STDARG_CAST && __GNUC__ */
-
-/** define if the system has a random number generating device */
-#undef PATH_RANDOMDEV
-
-/** define if pthread_attr_getstacksize() is available */
-#undef HAVE_PTHREAD_ATTR_GETSTACKSIZE
-
-/** define if pthread_attr_setstacksize() is available */
-#undef HAVE_PTHREAD_ATTR_SETSTACKSIZE
-
-/** define if you have strerror in the C library. */
-#undef HAVE_STRERROR
-
-/** Define if you are running under Compaq TruCluster. */
-#undef HAVE_TRUCLUSTER
-
-/* Define if OpenSSL includes DSA support */
-#undef HAVE_OPENSSL_DSA
-
-/* Define if OpenSSL includes ECDSA support */
-#undef HAVE_OPENSSL_ECDSA
-
-/* Define to the length type used by the socket API (socklen_t, size_t, int). */
-#undef ISC_SOCKADDR_LEN_T
-
-/* Define if threads need PTHREAD_SCOPE_SYSTEM */
-#undef NEED_PTHREAD_SCOPE_SYSTEM
-
-/* Define if building universal (internal helper macro) */
-#undef AC_APPLE_UNIVERSAL_BUILD
-
-/* Define to enable the "filter-aaaa-on-v4" option. */
-#undef ALLOW_FILTER_AAAA_ON_V4
-
-/* define if ATF unit tests are to be built. */
-#undef ATF_TEST
-
-/* Define if recvmsg() does not meet all of the BSD socket API specifications.
-   */
-#undef BROKEN_RECVMSG
-
-/* Define if you cannot bind() before connect() for TCP sockets. */
-#undef BROKEN_TCP_BIND_BEFORE_CONNECT
-
-/* Define to enable "rrset-order fixed" syntax. */
-#undef DNS_RDATASET_FIXED
-
-/* Define to enable rpz-nsdname rules. */
-#undef ENABLE_RPZ_NSDNAME
-
-/* Define to enable rpz-nsip rules. */
-#undef ENABLE_RPZ_NSIP
-
-/* Solaris hack to get select_large_fdset. */
-#undef FD_SETSIZE
-
-/* Define to nothing if C supports flexible array members, and to 1 if it does
-   not. That way, with a declaration like `struct s { int n; double
-   d[FLEXIBLE_ARRAY_MEMBER]; };', the struct hack can be used with pre-C99
-   compilers. When computing the size of such an object, don't use 'sizeof
-   (struct s)' as it overestimates the size. Use 'offsetof (struct s, d)'
-   instead. Don't use 'offsetof (struct s, d[0])', as this doesn't work with
-   MSVC and with C++ compilers. */
-#undef FLEXIBLE_ARRAY_MEMBER
-
-/* Define to 1 if you have the `chroot' function. */
-#undef HAVE_CHROOT
-
-/* Define to 1 if you have the <devpoll.h> header file. */
-#undef HAVE_DEVPOLL_H
-
-/* Define to 1 if you have the `dlclose' function. */
-#undef HAVE_DLCLOSE
-
-/* Define to 1 if you have the <dlfcn.h> header file. */
-#undef HAVE_DLFCN_H
-
-/* Define to 1 if you have the `dlopen' function. */
-#undef HAVE_DLOPEN
-
-/* Define to 1 if you have the `dlsym' function. */
-#undef HAVE_DLSYM
-
-/* Define to 1 if you have the `EVP_sha256' function. */
-#undef HAVE_EVP_SHA256
-
-/* Define to 1 if you have the `EVP_sha384' function. */
-#undef HAVE_EVP_SHA384
-
-/* Define to 1 if you have the `EVP_sha512' function. */
-#undef HAVE_EVP_SHA512
-
-/* Define to 1 if you have the <fcntl.h> header file. */
-#undef HAVE_FCNTL_H
-
-/* Define to 1 if you have the <gssapi/gssapi.h> header file. */
-#undef HAVE_GSSAPI_GSSAPI_H
-
-/* Define to 1 if you have the <gssapi/gssapi_krb5.h> header file. */
-#undef HAVE_GSSAPI_GSSAPI_KRB5_H
-
-/* Define to 1 if you have the <gssapi.h> header file. */
-#undef HAVE_GSSAPI_H
-
-/* Define to 1 if you have the <gssapi_krb5.h> header file. */
-#undef HAVE_GSSAPI_KRB5_H
-
-/* Define to 1 if you have the <inttypes.h> header file. */
-#undef HAVE_INTTYPES_H
-
-/* Define to 1 if you have the <kerberosv5/krb5.h> header file. */
-#undef HAVE_KERBEROSV5_KRB5_H
-
-/* Define to 1 if you have the <krb5.h> header file. */
-#undef HAVE_KRB5_H
-
-/* Define to 1 if you have the <krb5/krb5.h> header file. */
-#undef HAVE_KRB5_KRB5_H
-
-/* Define to 1 if you have the `c' library (-lc). */
-#undef HAVE_LIBC
-
-/* Define to 1 if you have the `cap' library (-lcap). */
-#undef HAVE_LIBCAP
-
-/* if system have backtrace function */
-#undef HAVE_LIBCTRACE
-
-/* Define to 1 if you have the `c_r' library (-lc_r). */
-#undef HAVE_LIBC_R
-
-/* Define to 1 if you have the `nsl' library (-lnsl). */
-#undef HAVE_LIBNSL
-
-/* Define to 1 if you have the `pthread' library (-lpthread). */
-#undef HAVE_LIBPTHREAD
-
-/* Define to 1 if you have the `scf' library (-lscf). */
-#undef HAVE_LIBSCF
-
-/* Define to 1 if you have the `socket' library (-lsocket). */
-#undef HAVE_LIBSOCKET
-
-/* Define to 1 if you have the `thr' library (-lthr). */
-#undef HAVE_LIBTHR
-
-/* Define if libxml2 was found */
-#undef HAVE_LIBXML2
-
-/* Define to 1 if you have the <linux/capability.h> header file. */
-#undef HAVE_LINUX_CAPABILITY_H
-
-/* Define to 1 if you have the <locale.h> header file. */
-#undef HAVE_LOCALE_H
-
-/* Define to 1 if you have the <memory.h> header file. */
-#undef HAVE_MEMORY_H
-
-/* Define to 1 if you have the `nanosleep' function. */
-#undef HAVE_NANOSLEEP
-
-/* Define to 1 if you have the <net/if6.h> header file. */
-#undef HAVE_NET_IF6_H
-
-/* Define if your OpenSSL version supports ECDSA. */
-#undef HAVE_OPENSSL_ECDSA
-
-/* Define if your OpenSSL version supports GOST. */
-#undef HAVE_OPENSSL_GOST
-
-/* Define to 1 if you have the <regex.h> header file. */
-#undef HAVE_REGEX_H
-
-/* Define to 1 if you have the `setegid' function. */
-#undef HAVE_SETEGID
-
-/* Define to 1 if you have the `seteuid' function. */
-#undef HAVE_SETEUID
-
-/* Define to 1 if you have the `setlocale' function. */
-#undef HAVE_SETLOCALE
-
-/* Define to 1 if you have the `setresgid' function. */
-#undef HAVE_SETRESGID
-
-/* Define to 1 if you have the `setresuid' function. */
-#undef HAVE_SETRESUID
-
-/* Define to 1 if you have the <stdint.h> header file. */
-#undef HAVE_STDINT_H
-
-/* Define to 1 if you have the <stdlib.h> header file. */
-#undef HAVE_STDLIB_H
-
-/* Define to 1 if you have the <strings.h> header file. */
-#undef HAVE_STRINGS_H
-
-/* Define to 1 if you have the <string.h> header file. */
-#undef HAVE_STRING_H
-
-/* Define to 1 if you have the <sys/capability.h> header file. */
-#undef HAVE_SYS_CAPABILITY_H
-
-/* Define to 1 if you have the <sys/devpoll.h> header file. */
-#undef HAVE_SYS_DEVPOLL_H
-
-/* Define to 1 if you have the <sys/dyntune.h> header file. */
-#undef HAVE_SYS_DYNTUNE_H
-
-/* Define to 1 if you have the <sys/param.h> header file. */
-#undef HAVE_SYS_PARAM_H
-
-/* Define to 1 if you have the <sys/prctl.h> header file. */
-#undef HAVE_SYS_PRCTL_H
-
-/* Define to 1 if you have the <sys/select.h> header file. */
-#undef HAVE_SYS_SELECT_H
-
-/* Define to 1 if you have the <sys/sockio.h> header file. */
-#undef HAVE_SYS_SOCKIO_H
-
-/* Define to 1 if you have the <sys/stat.h> header file. */
-#undef HAVE_SYS_STAT_H
-
-/* Define to 1 if you have the <sys/sysctl.h> header file. */
-#undef HAVE_SYS_SYSCTL_H
-
-/* Define to 1 if you have the <sys/time.h> header file. */
-#undef HAVE_SYS_TIME_H
-
-/* Define to 1 if you have the <sys/types.h> header file. */
-#undef HAVE_SYS_TYPES_H
-
-/* Define to 1 if you have the <sys/un.h> header file. */
-#undef HAVE_SYS_UN_H
-
-/* Define if running under Compaq TruCluster */
-#undef HAVE_TRUCLUSTER
-
-/* Define to 1 if you have the <unistd.h> header file. */
-#undef HAVE_UNISTD_H
-
-/* return type of gai_strerror */
-#undef IRS_GAISTRERROR_RETURN_T
-
-/* Define to the buffer length type used by getnameinfo(3). */
-#undef IRS_GETNAMEINFO_BUFLEN_T
-
-/* Define to the flags type used by getnameinfo(3). */
-#undef IRS_GETNAMEINFO_FLAGS_T
-
-/* Define to allow building of objects for dlopen(). */
-#undef ISC_DLZ_DLOPEN
-
-/* Define to the sub-directory in which libtool stores uninstalled libraries.
-   */
-#undef LT_OBJDIR
-
-/* Defined if extern char *optarg is not declared. */
-#undef NEED_OPTARG
-
-/* Define if connect does not honour the permission on the UNIX domain socket.
-   */
-#undef NEED_SECURE_DIRECTORY
-
-/* Define to the address where bug reports for this package should be sent. */
-#undef PACKAGE_BUGREPORT
-
-/* Define to the full name of this package. */
-#undef PACKAGE_NAME
-
-/* Define to the full name and version of this package. */
-#undef PACKAGE_STRING
-
-/* Define to the one symbol short name of this package. */
-#undef PACKAGE_TARNAME
-
-/* Define to the home page for this package. */
-#undef PACKAGE_URL
-
-/* Define to the version of this package. */
-#undef PACKAGE_VERSION
-
-/* Sets which flag to pass to open/fcntl to make non-blocking
-   (O_NDELAY/O_NONBLOCK). */
-#undef PORT_NONBLOCK
-
-/* The size of `void *', as computed by sizeof. */
-#undef SIZEOF_VOID_P
-
-/* Define to 1 if you have the ANSI C header files. */
-#undef STDC_HEADERS
-
-/* Define to 1 if you can safely include both <sys/time.h> and <time.h>. */
-#undef TIME_WITH_SYS_TIME
-
-/* Defined if you need to use ioctl(FIONBIO) instead a fcntl call to make
-   non-blocking. */
-#undef USE_FIONBIO_IOCTL
-
-/* define if idnkit support is to be included. */
-#undef WITH_IDN
-
-/* Define WORDS_BIGENDIAN to 1 if your processor stores words with the most
-   significant byte first (like Motorola and SPARC, unlike Intel). */
-#if defined AC_APPLE_UNIVERSAL_BUILD
-# if defined __BIG_ENDIAN__
-#  define WORDS_BIGENDIAN 1
-# endif
-#else
-# ifndef WORDS_BIGENDIAN
-#  undef WORDS_BIGENDIAN
-# endif
-#endif
-
-/* Define to empty if `const' does not conform to ANSI C. */
-#undef const
-
-/* Define to empty if your compiler does not support "static inline". */
-#undef inline
-
-/* Define to `unsigned int' if <sys/types.h> does not define. */
-#undef size_t
-
-/* Define to `int' if <sys/types.h> does not define. */
-#undef ssize_t
-
-/* Define to `unsigned long' if <sys/types.h> does not define. */
-#undef uintptr_t
-
-/* Define to empty if the keyword `volatile' does not work. Warning: valid
-   code using `volatile' can become incorrect without. Disable with care. */
-#undef volatile

Deleted: vendor/bind/dist/config.h.win32
===================================================================
--- vendor/bind/dist/config.h.win32	2016-11-03 12:21:01 UTC (rev 9202)
+++ vendor/bind/dist/config.h.win32	2016-11-03 12:22:00 UTC (rev 9203)
@@ -1,276 +0,0 @@
-/*
- * Copyright (C) 2004, 2006-2009, 2011, 2012  Internet Systems Consortium, Inc. ("ISC")
- * Copyright (C) 1999-2001  Internet Software Consortium.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
- */
-
-/* $Id: config.h.win32,v 1.1.1.1 2013-08-22 22:51:51 laffer1 Exp $ */
-
-/*
- * win32 configuration file
- * All definitions, declarations, macros and includes are
- * specific to the requirements of the Windows NT and Windows 2000
- * platforms
- */
-
-/* Define to empty if the keyword does not work.  */
-/* #undef const */
-
-/* Define as __inline if that's what the C compiler calls it.  */
-#define inline __inline
-
-/* Define to `unsigned' if <sys/types.h> doesn't define.  */
-/* #undef size_t */
-
-/*
- * ANSI C compliance enabled
- */
-#define __STDC__ 1
-
-/*
- * Silence compiler warnings about using strcpy and friends.
- */
-#define _CRT_SECURE_NO_DEPRECATE 1
-
-/*
- * Use 32 bit time.
- */
-#define _USE_32BIT_TIME_T 1
-
-/*
- * Minimum version is Windows XP
- */
-#define _WIN32_WINNT 0x0501
-
-/* Define if you have the ANSI C header files.  */
-#define STDC_HEADERS 1
-
-/* Define if you can safely include both <sys/time.h> and <time.h>.  */
-#define TIME_WITH_SYS_TIME 1
-
-/* define on DEC OSF to enable 4.4BSD style sa_len support */
-/* #undef _SOCKADDR_LEN */
-
-/* define if your system needs pthread_init() before using pthreads */
-/* #undef NEED_PTHREAD_INIT */
-
-/* define if your system has sigwait() */
-/* #undef HAVE_SIGWAIT */
-
-/* define on Solaris to get sigwait() to work using pthreads semantics */
-/* #undef _POSIX_PTHREAD_SEMANTICS */
-
-/* define if LinuxThreads is in use */
-/* #undef HAVE_LINUXTHREADS */
-
-/* define if catgets() is available */
-/* #undef HAVE_CATGETS */
-
-/* define if you have the NET_RT_IFLIST sysctl variable. */
-#define HAVE_IFLIST_SYSCTL 1
-
-/* define if you need to #define _XPG4_2 before including sys/socket.h */
-/* #undef NEED_XPG4_2_BEFORE_SOCKET_H */
-
-/* define if you need to #define _XOPEN_SOURCE_ENTENDED before including
- * sys/socket.h
- */
-/* #undef NEED_XSE_BEFORE_SOCKET_H */
-
-/* Define if you have the <fcntl.h> header file.  */
-#define HAVE_FCNTL_H 1
-
-/* Define if you have the <sys/sockio.h> header file.  */
-#define HAVE_SYS_SOCKIO_H 1
-
-/* Define if you have the <sys/time.h> header file.  */
-#define HAVE_SYS_TIME_H 1
-
-/* Define if you have the <unistd.h> header file.  */
-#define HAVE_UNISTD_H 1
-
-/* Define if you have the c_r library (-lc_r).  */
-/* #undef HAVE_LIBC_R */
-
-/* Define if you have the nsl library (-lnsl).  */
-/* #undef HAVE_LIBNSL */
-
-/* Define if you have the pthread library (-lpthread).  */
-/* #undef HAVE_LIBPTHREAD */
-
-/* Define if you have the socket library (-lsocket).  */
-/* #undef HAVE_LIBSOCKET */
-
-/* Define if you have h_errno */
-#define HAVE_H_ERRNO
-
-/* Define if you have RSA_generate_key(). */
-#define HAVE_RSA_GENERATE_KEY
-
-/* Define if you have DSA_generate_parameters(). */
-#define HAVE_DSA_GENERATE_PARAMETERS
-
-/* Define if you have DH_generate_parameters(). */
-#define HAVE_DH_GENERATE_PARAMETERS
-
-#define WANT_IPV6
-
-#define S_IFMT   _S_IFMT         /* file type mask */
-#define S_IFDIR  _S_IFDIR        /* directory */
-#define S_IFCHR  _S_IFCHR        /* character special */
-#define S_IFIFO  _S_IFIFO        /* pipe */
-#define S_IFREG  _S_IFREG        /* regular */
-#define S_IREAD  _S_IREAD        /* read permission, owner */
-#define S_IWRITE _S_IWRITE       /* write permission, owner */
-#define S_IEXEC  _S_IEXEC        /* execute/search permission, owner */
-
-#define O_RDONLY        _O_RDONLY
-#define O_WRONLY        _O_WRONLY
-#define O_RDWR          _O_RDWR
-#define O_APPEND        _O_APPEND
-#define O_CREAT         _O_CREAT
-#define O_TRUNC         _O_TRUNC
-#define O_EXCL          _O_EXCL
-
-/* open() under unix allows setting of read/write permissions
- * at the owner, group and other levels.  These don't exist in NT
- * We'll just map them all to the NT equivalent
- */
-
-#define S_IRUSR _S_IREAD	/* Owner read permission */
-#define S_IWUSR _S_IWRITE	/* Owner write permission */
-#define S_IRGRP _S_IREAD	/* Group read permission */
-#define S_IWGRP _S_IWRITE	/* Group write permission */
-#define S_IROTH _S_IREAD	/* Other read permission */
-#define S_IWOTH _S_IWRITE	/* Other write permission */
-
-
-/*
- * WIN32 specials until some other way of dealing with these is decided.
- */
-
-#define snprintf _snprintf
-#if _MSC_VER <= 1400
-#define vsnprintf _vsnprintf
-#endif
-#define strcasecmp  _stricmp
-#define strncasecmp _strnicmp
-#define strdup _strdup
-#define sopen _sopen
-#define isascii __isascii
-#define stat _stat
-#define fstat _fstat
-#define fileno _fileno
-#define unlink _unlink
-#define chdir _chdir
-#define mkdir _mkdir
-#define getcwd _getcwd
-#define utime _utime
-#define utimbuf _utimbuf
-
-/* #define EAFNOSUPPORT EINVAL */
-#define chmod _chmod
-#define getpid _getpid
-#define getppid _getpid	/* WARNING!!! For now this gets the same pid */
-#define random rand	/* Random number generator */
-#define srandom srand	/* Random number generator seeding */
-/* for the config file */
-typedef unsigned int    uid_t;          /* user id */
-typedef unsigned int    gid_t;          /* group id */
-typedef long pid_t;			/* PID */
-typedef int ssize_t;
-typedef long off_t;
-
-/*
- * Set up the Version Information
- */
-#include <versions.h>
-
-/* We actually are using the CryptAPI and not a device */
-#define PATH_RANDOMDEV		"CryptAPI"
-
-#include <stddef.h>
-#include <stdio.h>
-#include <stdarg.h>
-
-/*
- * Applications may need to get the configuration path
- */
-#ifndef _USRDLL
-#include <isc/ntpaths.h>
-#endif
-
-#define fdopen	_fdopen
-#define read	_read
-#define open	_open
-#define close	_close
-#define write	_write
-#include <io.h>
-#define isatty	_isatty
-
-#ifndef _WINSOCKAPI_
-#define _WINSOCKAPI_   /* Prevent inclusion of winsock.h in windows.h */
-#endif
-
-/*
- * Make the number of available sockets large
- * The number of sockets needed can get large and memory's cheap
- * This must be defined before winsock2.h gets included as the
- * macro is used there.
- */
-
-#define FD_SETSIZE 16384
-#include <windows.h>
-
-/*
- * Windows doesn't use configure so just set "default" here.
- */
-#define CONFIGARGS "default"
-
-/*
- * Define if libxml2 is present
- */
-#define HAVE_LIBXML2 1
-
-/*
- * Define when building BIND9.  When building exportable versions
- * of libisc, libdns, etc, this must be removed.
- */
-#define BIND9 1
-
-/*
- * Define if PKCS11 is to be used.
- */
-/* #undef USE_PKCS11 */
-
-/** define if struct addrinfo exists */
-#define HAVE_ADDRINFO
-
-/** define if getaddrinfo() exists */
-#define HAVE_GETADDRINFO
-
-/** define if gai_strerror() exists */
-#define HAVE_GAISTRERROR
-
-/* Define if your OpenSSL version supports GOST. */
-#define HAVE_OPENSSL_GOST
-
-/* Define to enable rpz-nsdname rules. */
-#define ENABLE_RPZ_NSDNAME
-
-/* Define to enable rpz-nsip rules. */
-#define ENABLE_RPZ_NSIP
-
-/* Get SRCID */
-#include "srcid.h"

Modified: vendor/bind/dist/config.sub
===================================================================
--- vendor/bind/dist/config.sub	2016-11-03 12:21:01 UTC (rev 9202)
+++ vendor/bind/dist/config.sub	2016-11-03 12:22:00 UTC (rev 9203)
@@ -1,36 +1,31 @@
 #! /bin/sh
 # Configuration validation subroutine script.
-#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-#   2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
+#   Copyright 1992-2013 Free Software Foundation, Inc.
 
-timestamp='2004-08-29'
+timestamp='2013-10-01'
 
-# This file is (in principle) common to ALL GNU software.
-# The presence of a machine in this file suggests that SOME GNU software
-# can handle that machine.  It does not imply ALL GNU software can.
-#
-# This file is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
 # (at your option) any later version.
 #
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
 #
 # You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330,
-# Boston, MA 02111-1307, USA.
-
+# along with this program; if not, see <http://www.gnu.org/licenses/>.
+#
 # As a special exception to the GNU General Public License, if you
 # distribute this file as part of a program that contains a
 # configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
+# the same distribution terms that you use for the rest of that
+# program.  This Exception is an additional permission under section 7
+# of the GNU General Public License, version 3 ("GPLv3").
 
-# Please send patches to <config-patches at gnu.org>.  Submit a context
-# diff and a properly formatted ChangeLog entry.
+
+# Please send patches with a ChangeLog entry to config-patches at gnu.org.
 #
 # Configuration subroutine to validate and canonicalize a configuration type.
 # Supply the specified configuration type as an argument.
@@ -37,6 +32,9 @@
 # If it is invalid, we print an error message on stderr and exit with code 1.
 # Otherwise, we print the canonical config type on stdout and succeed.
 
+# You can get the latest version of this script from:
+# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
+
 # This file is supposed to be the same for all GNU packages
 # and recognize all the CPU types, system types and aliases
 # that are meaningful with *any* GNU software.
@@ -70,8 +68,7 @@
 version="\
 GNU config.sub ($timestamp)
 
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
-Free Software Foundation, Inc.
+Copyright 1992-2013 Free Software Foundation, Inc.
 
 This is free software; see the source for copying conditions.  There is NO
 warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
@@ -83,11 +80,11 @@
 while test $# -gt 0 ; do
   case $1 in
     --time-stamp | --time* | -t )
-       echo "$timestamp" ; exit 0 ;;
+       echo "$timestamp" ; exit ;;
     --version | -v )
-       echo "$version" ; exit 0 ;;
+       echo "$version" ; exit ;;
     --help | --h* | -h )
-       echo "$usage"; exit 0 ;;
+       echo "$usage"; exit ;;
     -- )     # Stop option processing
        shift; break ;;
     - )	# Use stdin as input.
@@ -99,7 +96,7 @@
     *local*)
        # First pass through any local machine types.
        echo $1
-       exit 0;;
+       exit ;;
 
     * )
        break ;;
@@ -118,11 +115,18 @@
 # Here we must recognize all the valid KERNEL-OS combinations.
 maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
 case $maybe_os in
-  nto-qnx* | linux-gnu* | linux-dietlibc | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | \
-  kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | storm-chaos* | os2-emx* | rtmk-nova*)
+  nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \
+  linux-musl* | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \
+  knetbsd*-gnu* | netbsd*-gnu* | \
+  kopensolaris*-gnu* | \
+  storm-chaos* | os2-emx* | rtmk-nova*)
     os=-$maybe_os
     basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
     ;;
+  android-linux)
+    os=-linux-android
+    basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`-unknown
+    ;;
   *)
     basic_machine=`echo $1 | sed 's/-[^-]*$//'`
     if [ $basic_machine != $1 ]
@@ -145,10 +149,13 @@
 	-convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
 	-c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
 	-harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
-	-apple | -axis | -knuth | -cray)
+	-apple | -axis | -knuth | -cray | -microblaze*)
 		os=
 		basic_machine=$1
 		;;
+	-bluegene*)
+		os=-cnk
+		;;
 	-sim | -cisco | -oki | -wec | -winbond)
 		os=
 		basic_machine=$1
@@ -163,13 +170,17 @@
 		os=-chorusos
 		basic_machine=$1
 		;;
- 	-chorusrdb)
- 		os=-chorusrdb
+	-chorusrdb)
+		os=-chorusrdb
 		basic_machine=$1
- 		;;
+		;;
 	-hiux*)
 		os=-hiuxwe2
 		;;
+	-sco6)
+		os=-sco5v6
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
 	-sco5)
 		os=-sco3.2v5
 		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
@@ -186,6 +197,10 @@
 		# Don't forget version if it is 3.2v4 or newer.
 		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
 		;;
+	-sco5v6*)
+		# Don't forget version if it is 3.2v4 or newer.
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
 	-sco*)
 		os=-sco3.2v2
 		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
@@ -203,6 +218,12 @@
 	-isc*)
 		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
 		;;
+	-lynx*178)
+		os=-lynxos178
+		;;
+	-lynx*5)
+		os=-lynxos5
+		;;
 	-lynx*)
 		os=-lynxos
 		;;
@@ -227,25 +248,39 @@
 	# Some are omitted here because they have special meanings below.
 	1750a | 580 \
 	| a29k \
+	| aarch64 | aarch64_be \
 	| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
 	| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
 	| am33_2.0 \
-	| arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \
-	| c4x | clipper \
+	| arc | arceb \
+	| arm | arm[bl]e | arme[lb] | armv[2-8] | armv[3-8][lb] | armv7[arm] \
+	| avr | avr32 \
+	| be32 | be64 \
+	| bfin \
+	| c4x | c8051 | clipper \
 	| d10v | d30v | dlx | dsp16xx \
-	| fr30 | frv \
+	| epiphany \
+	| fido | fr30 | frv \
 	| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
+	| hexagon \
 	| i370 | i860 | i960 | ia64 \
 	| ip2k | iq2000 \
-	| m32r | m32rle | m68000 | m68k | m88k | mcore \
+	| k1om \
+	| le32 | le64 \
+	| lm32 \
+	| m32c | m32r | m32rle | m68000 | m68k | m88k \
+	| maxq | mb | microblaze | microblazeel | mcore | mep | metag \
 	| mips | mipsbe | mipseb | mipsel | mipsle \
 	| mips16 \
 	| mips64 | mips64el \
+	| mips64octeon | mips64octeonel \
+	| mips64orion | mips64orionel \
+	| mips64r5900 | mips64r5900el \
 	| mips64vr | mips64vrel \
-	| mips64orion | mips64orionel \
 	| mips64vr4100 | mips64vr4100el \
 	| mips64vr4300 | mips64vr4300el \
 	| mips64vr5000 | mips64vr5000el \
+	| mips64vr5900 | mips64vr5900el \
 	| mipsisa32 | mipsisa32el \
 	| mipsisa32r2 | mipsisa32r2el \
 	| mipsisa64 | mipsisa64el \
@@ -252,33 +287,69 @@
 	| mipsisa64r2 | mipsisa64r2el \
 	| mipsisa64sb1 | mipsisa64sb1el \
 	| mipsisa64sr71k | mipsisa64sr71kel \
+	| mipsr5900 | mipsr5900el \
 	| mipstx39 | mipstx39el \
 	| mn10200 | mn10300 \
+	| moxie \
+	| mt \
 	| msp430 \
+	| nds32 | nds32le | nds32be \
+	| nios | nios2 | nios2eb | nios2el \
 	| ns16k | ns32k \
-	| openrisc | or32 \
+	| open8 \
+	| or1k | or32 \
 	| pdp10 | pdp11 | pj | pjl \
-	| powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
+	| powerpc | powerpc64 | powerpc64le | powerpcle \
 	| pyramid \
-	| sh | sh[1234] | sh[23]e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \
+	| rl78 | rx \
+	| score \
+	| sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
 	| sh64 | sh64le \
-	| sparc | sparc64 | sparc86x | sparclet | sparclite | sparcv8 | sparcv9 | sparcv9b \
-	| strongarm \
-	| tahoe | thumb | tic4x | tic80 | tron \
-	| v850 | v850e \
+	| sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \
+	| sparcv8 | sparcv9 | sparcv9b | sparcv9v \
+	| spu \
+	| tahoe | tic4x | tic54x | tic55x | tic6x | tic80 | tron \
+	| ubicom32 \
+	| v850 | v850e | v850e1 | v850e2 | v850es | v850e2v3 \
 	| we32k \
-	| x86 | xscale | xstormy16 | xtensa \
-	| z8k)
+	| x86 | xc16x | xstormy16 | xtensa \
+	| z8k | z80)
 		basic_machine=$basic_machine-unknown
 		;;
-	m6811 | m68hc11 | m6812 | m68hc12)
-		# Motorola 68HC11/12.
+	c54x)
+		basic_machine=tic54x-unknown
+		;;
+	c55x)
+		basic_machine=tic55x-unknown
+		;;
+	c6x)
+		basic_machine=tic6x-unknown
+		;;
+	m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | nvptx | picochip)
 		basic_machine=$basic_machine-unknown
 		os=-none
 		;;
 	m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
 		;;
+	ms1)
+		basic_machine=mt-unknown
+		;;
 
+	strongarm | thumb | xscale)
+		basic_machine=arm-unknown
+		;;
+	xgate)
+		basic_machine=$basic_machine-unknown
+		os=-none
+		;;
+	xscaleeb)
+		basic_machine=armeb-unknown
+		;;
+
+	xscaleel)
+		basic_machine=armel-unknown
+		;;
+
 	# We use `pc' rather than `unknown'
 	# because (1) that's what they normally are, and
 	# (2) the word "unknown" tends to confuse beginning users.
@@ -293,32 +364,42 @@
 	# Recognize the basic CPU types with company name.
 	580-* \
 	| a29k-* \
+	| aarch64-* | aarch64_be-* \
 	| alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
 	| alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
-	| alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
+	| alphapca5[67]-* | alpha64pca5[67]-* | arc-* | arceb-* \
 	| arm-*  | armbe-* | armle-* | armeb-* | armv*-* \
-	| avr-* \
-	| bs2000-* \
-	| c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \
-	| clipper-* | craynv-* | cydra-* \
+	| avr-* | avr32-* \
+	| be32-* | be64-* \
+	| bfin-* | bs2000-* \
+	| c[123]* | c30-* | [cjt]90-* | c4x-* \
+	| c8051-* | clipper-* | craynv-* | cydra-* \
 	| d10v-* | d30v-* | dlx-* \
 	| elxsi-* \
-	| f30[01]-* | f700-* | fr30-* | frv-* | fx80-* \
+	| f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \
 	| h8300-* | h8500-* \
 	| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
+	| hexagon-* \
 	| i*86-* | i860-* | i960-* | ia64-* \
 	| ip2k-* | iq2000-* \
-	| m32r-* | m32rle-* \
+	| k1om-* \
+	| le32-* | le64-* \
+	| lm32-* \
+	| m32c-* | m32r-* | m32rle-* \
 	| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
-	| m88110-* | m88k-* | mcore-* \
+	| m88110-* | m88k-* | maxq-* | mcore-* | metag-* \
+	| microblaze-* | microblazeel-* \
 	| mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
 	| mips16-* \
 	| mips64-* | mips64el-* \
+	| mips64octeon-* | mips64octeonel-* \
+	| mips64orion-* | mips64orionel-* \
+	| mips64r5900-* | mips64r5900el-* \
 	| mips64vr-* | mips64vrel-* \
-	| mips64orion-* | mips64orionel-* \
 	| mips64vr4100-* | mips64vr4100el-* \
 	| mips64vr4300-* | mips64vr4300el-* \
 	| mips64vr5000-* | mips64vr5000el-* \
+	| mips64vr5900-* | mips64vr5900el-* \
 	| mipsisa32-* | mipsisa32el-* \
 	| mipsisa32r2-* | mipsisa32r2el-* \
 	| mipsisa64-* | mipsisa64el-* \
@@ -325,29 +406,42 @@
 	| mipsisa64r2-* | mipsisa64r2el-* \
 	| mipsisa64sb1-* | mipsisa64sb1el-* \
 	| mipsisa64sr71k-* | mipsisa64sr71kel-* \
+	| mipsr5900-* | mipsr5900el-* \
 	| mipstx39-* | mipstx39el-* \
 	| mmix-* \
+	| mt-* \
 	| msp430-* \
+	| nds32-* | nds32le-* | nds32be-* \
+	| nios-* | nios2-* | nios2eb-* | nios2el-* \
 	| none-* | np1-* | ns16k-* | ns32k-* \
+	| open8-* \
 	| orion-* \
 	| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
-	| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
+	| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \
 	| pyramid-* \
-	| romp-* | rs6000-* \
-	| sh-* | sh[1234]-* | sh[23]e-* | sh[34]eb-* | shbe-* \
+	| rl78-* | romp-* | rs6000-* | rx-* \
+	| sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
 	| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
-	| sparc-* | sparc64-* | sparc86x-* | sparclet-* | sparclite-* \
-	| sparcv8-* | sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \
-	| tahoe-* | thumb-* \
+	| sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \
+	| sparclite-* \
+	| sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx?-* \
+	| tahoe-* \
 	| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
+	| tile*-* \
 	| tron-* \
-	| v850-* | v850e-* | vax-* \
+	| ubicom32-* \
+	| v850-* | v850e-* | v850e1-* | v850es-* | v850e2-* | v850e2v3-* \
+	| vax-* \
 	| we32k-* \
-	| x86-* | x86_64-* | xps100-* | xscale-* | xstormy16-* \
-	| xtensa-* \
+	| x86-* | x86_64-* | xc16x-* | xps100-* \
+	| xstormy16-* | xtensa*-* \
 	| ymp-* \
-	| z8k-*)
+	| z8k-* | z80-*)
 		;;
+	# Recognize the basic CPU types without company name, with glob match.
+	xtensa*)
+		basic_machine=$basic_machine-unknown
+		;;
 	# Recognize the various machine names and aliases which stand
 	# for a CPU type and a company and sometimes even an OS.
 	386bsd)
@@ -364,7 +458,7 @@
 		basic_machine=a29k-amd
 		os=-udi
 		;;
-    	abacus)
+	abacus)
 		basic_machine=abacus-unknown
 		;;
 	adobe68k)
@@ -410,6 +504,10 @@
 		basic_machine=m68k-apollo
 		os=-bsd
 		;;
+	aros)
+		basic_machine=i386-pc
+		os=-aros
+		;;
 	aux)
 		basic_machine=m68k-apple
 		os=-aux
@@ -418,10 +516,35 @@
 		basic_machine=ns32k-sequent
 		os=-dynix
 		;;
+	blackfin)
+		basic_machine=bfin-unknown
+		os=-linux
+		;;
+	blackfin-*)
+		basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'`
+		os=-linux
+		;;
+	bluegene*)
+		basic_machine=powerpc-ibm
+		os=-cnk
+		;;
+	c54x-*)
+		basic_machine=tic54x-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	c55x-*)
+		basic_machine=tic55x-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	c6x-*)
+		basic_machine=tic6x-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
 	c90)
 		basic_machine=c90-cray
 		os=-unicos
 		;;
+	cegcc)
+		basic_machine=arm-unknown
+		os=-cegcc
+		;;
 	convex-c1)
 		basic_machine=c1-convex
 		os=-bsd
@@ -450,8 +573,8 @@
 		basic_machine=craynv-cray
 		os=-unicosmp
 		;;
-	cr16c)
-		basic_machine=cr16c-unknown
+	cr16 | cr16-*)
+		basic_machine=cr16-unknown
 		os=-elf
 		;;
 	crds | unos)
@@ -489,6 +612,14 @@
 		basic_machine=m88k-motorola
 		os=-sysv3
 		;;
+	dicos)
+		basic_machine=i686-pc
+		os=-dicos
+		;;
+	djgpp)
+		basic_machine=i586-pc
+		os=-msdosdjgpp
+		;;
 	dpx20 | dpx20-*)
 		basic_machine=rs6000-bull
 		os=-bosx
@@ -600,7 +731,6 @@
 	i370-ibm* | ibm*)
 		basic_machine=i370-ibm
 		;;
-# I'm not sure what "Sysv32" means.  Should this be sysv3.2?
 	i*86v32)
 		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
 		os=-sysv32
@@ -639,6 +769,14 @@
 		basic_machine=m68k-isi
 		os=-sysv
 		;;
+	m68knommu)
+		basic_machine=m68k-unknown
+		os=-linux
+		;;
+	m68knommu-*)
+		basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'`
+		os=-linux
+		;;
 	m88k-omron*)
 		basic_machine=m88k-omron
 		;;
@@ -650,10 +788,21 @@
 		basic_machine=ns32k-utek
 		os=-sysv
 		;;
+	microblaze*)
+		basic_machine=microblaze-xilinx
+		;;
+	mingw64)
+		basic_machine=x86_64-pc
+		os=-mingw64
+		;;
 	mingw32)
-		basic_machine=i386-pc
+		basic_machine=i686-pc
 		os=-mingw32
 		;;
+	mingw32ce)
+		basic_machine=arm-unknown
+		os=-mingw32ce
+		;;
 	miniframe)
 		basic_machine=m68000-convergent
 		;;
@@ -679,10 +828,21 @@
 		basic_machine=i386-pc
 		os=-msdos
 		;;
+	ms1-*)
+		basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`
+		;;
+	msys)
+		basic_machine=i686-pc
+		os=-msys
+		;;
 	mvs)
 		basic_machine=i370-ibm
 		os=-mvs
 		;;
+	nacl)
+		basic_machine=le32-unknown
+		os=-nacl
+		;;
 	ncr3000)
 		basic_machine=i486-ncr
 		os=-sysv4
@@ -747,6 +907,12 @@
 	np1)
 		basic_machine=np1-gould
 		;;
+	neo-tandem)
+		basic_machine=neo-tandem
+		;;
+	nse-tandem)
+		basic_machine=nse-tandem
+		;;
 	nsr-tandem)
 		basic_machine=nsr-tandem
 		;;
@@ -754,9 +920,8 @@
 		basic_machine=hppa1.1-oki
 		os=-proelf
 		;;
-	or32 | or32-*)
+	openrisc | openrisc-*)
 		basic_machine=or32-unknown
-		os=-coff
 		;;
 	os400)
 		basic_machine=powerpc-ibm
@@ -778,6 +943,14 @@
 		basic_machine=i860-intel
 		os=-osf
 		;;
+	parisc)
+		basic_machine=hppa-unknown
+		os=-linux
+		;;
+	parisc-*)
+		basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'`
+		os=-linux
+		;;
 	pbd)
 		basic_machine=sparc-tti
 		;;
@@ -787,6 +960,12 @@
 	pc532 | pc532-*)
 		basic_machine=ns32k-pc532
 		;;
+	pc98)
+		basic_machine=i386-pc
+		;;
+	pc98-*)
+		basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
 	pentium | p5 | k5 | k6 | nexgen | viac3)
 		basic_machine=i586-pc
 		;;
@@ -816,9 +995,10 @@
 		;;
 	power)	basic_machine=power-ibm
 		;;
-	ppc)	basic_machine=powerpc-unknown
+	ppc | ppcbe)	basic_machine=powerpc-unknown
 		;;
-	ppc-*)	basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
+	ppc-* | ppcbe-*)
+		basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
 		;;
 	ppcle | powerpclittle | ppc-le | powerpc-little)
 		basic_machine=powerpcle-unknown
@@ -843,6 +1023,14 @@
 		basic_machine=i586-unknown
 		os=-pw32
 		;;
+	rdos | rdos64)
+		basic_machine=x86_64-pc
+		os=-rdos
+		;;
+	rdos32)
+		basic_machine=i386-pc
+		os=-rdos
+		;;
 	rom68k)
 		basic_machine=m68k-rom68k
 		os=-coff
@@ -869,6 +1057,10 @@
 	sb1el)
 		basic_machine=mipsisa64sb1el-unknown
 		;;
+	sde)
+		basic_machine=mipsisa32-sde
+		os=-elf
+		;;
 	sei)
 		basic_machine=mips-sei
 		os=-seiux
@@ -880,6 +1072,9 @@
 		basic_machine=sh-hitachi
 		os=-hms
 		;;
+	sh5el)
+		basic_machine=sh5le-unknown
+		;;
 	sh64)
 		basic_machine=sh64-unknown
 		;;
@@ -901,6 +1096,9 @@
 		basic_machine=i860-stratus
 		os=-sysv4
 		;;
+	strongarm-* | thumb-*)
+		basic_machine=arm-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
 	sun2)
 		basic_machine=m68000-sun
 		;;
@@ -957,18 +1155,10 @@
 		basic_machine=t90-cray
 		os=-unicos
 		;;
-	tic54x | c54x*)
-		basic_machine=tic54x-unknown
-		os=-coff
+	tile*)
+		basic_machine=$basic_machine-unknown
+		os=-linux-gnu
 		;;
-	tic55x | c55x*)
-		basic_machine=tic55x-unknown
-		os=-coff
-		;;
-	tic6x | c6x*)
-		basic_machine=tic6x-unknown
-		os=-coff
-		;;
 	tx39)
 		basic_machine=mipstx39-unknown
 		;;
@@ -1029,9 +1219,16 @@
 		basic_machine=hppa1.1-winbond
 		os=-proelf
 		;;
+	xbox)
+		basic_machine=i686-pc
+		os=-mingw32
+		;;
 	xps | xps100)
 		basic_machine=xps100-honeywell
 		;;
+	xscale-* | xscalee[bl]-*)
+		basic_machine=`echo $basic_machine | sed 's/^xscale/arm/'`
+		;;
 	ymp)
 		basic_machine=ymp-cray
 		os=-unicos
@@ -1040,6 +1237,10 @@
 		basic_machine=z8k-unknown
 		os=-sim
 		;;
+	z80-*-coff)
+		basic_machine=z80-unknown
+		os=-sim
+		;;
 	none)
 		basic_machine=none-none
 		os=-none
@@ -1078,13 +1279,10 @@
 	we32k)
 		basic_machine=we32k-att
 		;;
-	sh3 | sh4 | sh[34]eb | sh[1234]le | sh[23]ele)
+	sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele)
 		basic_machine=sh-unknown
 		;;
-	sh64)
-		basic_machine=sh64-unknown
-		;;
-	sparc | sparcv8 | sparcv9 | sparcv9b)
+	sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v)
 		basic_machine=sparc-sun
 		;;
 	cydra)
@@ -1128,9 +1326,12 @@
 if [ x"$os" != x"" ]
 then
 case $os in
-        # First match some system type aliases
-        # that might get confused with valid system types.
+	# First match some system type aliases
+	# that might get confused with valid system types.
 	# -solaris* is a basic system type, with this one exception.
+	-auroraux)
+		os=-auroraux
+		;;
 	-solaris1 | -solaris1.*)
 		os=`echo $os | sed -e 's|solaris1|sunos4|'`
 		;;
@@ -1151,26 +1352,31 @@
 	# Each alternative MUST END IN A *, to match a version number.
 	# -sysv* is not here because it comes later, after sysvr4.
 	-gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
-	      | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\
-	      | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \
+	      | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\
+	      | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \
+	      | -sym* | -kopensolaris* | -plan9* \
 	      | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
-	      | -aos* \
+	      | -aos* | -aros* \
 	      | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
 	      | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
-	      | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* | -openbsd* \
+	      | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
+	      | -bitrig* | -openbsd* | -solidbsd* \
 	      | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
 	      | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
 	      | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
 	      | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
-	      | -chorusos* | -chorusrdb* \
-	      | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
-	      | -mingw32* | -linux-gnu* | -linux-uclibc* | -uxpv* | -beos* | -mpeix* | -udk* \
+	      | -chorusos* | -chorusrdb* | -cegcc* \
+	      | -cygwin* | -msys* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
+	      | -mingw32* | -mingw64* | -linux-gnu* | -linux-android* \
+	      | -linux-newlib* | -linux-musl* | -linux-uclibc* \
+	      | -uxpv* | -beos* | -mpeix* | -udk* \
 	      | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
 	      | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
 	      | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
 	      | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
 	      | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
-	      | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly*)
+	      | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
+	      | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es*)
 	# Remember, each alternative MUST END IN *, to match a version number.
 		;;
 	-qnx*)
@@ -1188,7 +1394,7 @@
 		os=`echo $os | sed -e 's|nto|nto-qnx|'`
 		;;
 	-sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
-	      | -windows* | -osx | -abug | -netware* | -os9* | -beos* \
+	      | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \
 	      | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
 		;;
 	-mac*)
@@ -1209,7 +1415,7 @@
 	-opened*)
 		os=-openedition
 		;;
-        -os400*)
+	-os400*)
 		os=-os400
 		;;
 	-wince*)
@@ -1258,7 +1464,7 @@
 	-sinix*)
 		os=-sysv4
 		;;
-        -tpf*)
+	-tpf*)
 		os=-tpf
 		;;
 	-triton*)
@@ -1294,9 +1500,14 @@
 	-aros*)
 		os=-aros
 		;;
-	-kaos*)
-		os=-kaos
+	-zvmoe)
+		os=-zvmoe
 		;;
+	-dicos*)
+		os=-dicos
+		;;
+	-nacl*)
+		;;
 	-none)
 		;;
 	*)
@@ -1319,6 +1530,12 @@
 # system, and we'll never get to this point.
 
 case $basic_machine in
+	score-*)
+		os=-elf
+		;;
+	spu-*)
+		os=-elf
+		;;
 	*-acorn)
 		os=-riscix1.2
 		;;
@@ -1328,9 +1545,24 @@
 	arm*-semi)
 		os=-aout
 		;;
-    c4x-* | tic4x-*)
-        os=-coff
-        ;;
+	c4x-* | tic4x-*)
+		os=-coff
+		;;
+	c8051-*)
+		os=-elf
+		;;
+	hexagon-*)
+		os=-elf
+		;;
+	tic54x-*)
+		os=-coff
+		;;
+	tic55x-*)
+		os=-coff
+		;;
+	tic6x-*)
+		os=-coff
+		;;
 	# This must come before the *-dec entry.
 	pdp10-*)
 		os=-tops20
@@ -1349,13 +1581,13 @@
 		;;
 	m68000-sun)
 		os=-sunos3
-		# This also exists in the configure program, but was not the
-		# default.
-		# os=-sunos4
 		;;
 	m68*-cisco)
 		os=-aout
 		;;
+	mep-*)
+		os=-elf
+		;;
 	mips*-cisco)
 		os=-elf
 		;;
@@ -1362,6 +1594,9 @@
 	mips*-*)
 		os=-elf
 		;;
+	or1k-*)
+		os=-elf
+		;;
 	or32-*)
 		os=-coff
 		;;
@@ -1374,10 +1609,13 @@
 	*-be)
 		os=-beos
 		;;
+	*-haiku)
+		os=-haiku
+		;;
 	*-ibm)
 		os=-aix
 		;;
-    	*-knuth)
+	*-knuth)
 		os=-mmixware
 		;;
 	*-wec)
@@ -1482,7 +1720,7 @@
 			-sunos*)
 				vendor=sun
 				;;
-			-aix*)
+			-cnk*|-aix*)
 				vendor=ibm
 				;;
 			-beos*)
@@ -1545,7 +1783,7 @@
 esac
 
 echo $basic_machine$os
-exit 0
+exit
 
 # Local variables:
 # eval: (add-hook 'write-file-hooks 'time-stamp)

Deleted: vendor/bind/dist/configure
===================================================================
--- vendor/bind/dist/configure	2016-11-03 12:21:01 UTC (rev 9202)
+++ vendor/bind/dist/configure	2016-11-03 12:22:00 UTC (rev 9203)
@@ -1,22747 +0,0 @@
-#! /bin/sh
-# Copyright (C) 2004-2013  Internet Systems Consortium, Inc. ("ISC")
-# Copyright (C) 1996-2003  Internet Software Consortium.
-#
-# Permission to use, copy, modify, and/or distribute this software for any
-# purpose with or without fee is hereby granted, provided that the above
-# copyright notice and this permission notice appear in all copies.
-#
-# THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
-# REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
-# AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
-# INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
-# LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
-# OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-# PERFORMANCE OF THIS SOFTWARE.
-#
-# $Id: configure,v 1.1.1.1 2013-08-22 22:51:51 laffer1 Exp $
-#
-# 	Portions of this code release fall under one or more of the
-# 	following Copyright notices.  Please see individual source
-# 	files for details.
-#
-# 	For binary releases also see: OpenSSL-LICENSE.
-#
-# Copyright (C) 1996-2001  Nominum, Inc.
-#
-# Permission to use, copy, modify, and distribute this software for any
-# purpose with or without fee is hereby granted, provided that the above
-# copyright notice and this permission notice appear in all copies.
-#
-# THE SOFTWARE IS PROVIDED "AS IS" AND NOMINUM DISCLAIMS ALL WARRANTIES
-# WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-# MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL NOMINUM BE LIABLE FOR
-# ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-# WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-# ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
-# OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-#
-#  -----------------------------------------------------------------------------
-#
-# Copyright (C) 1995-2000 by Network Associates, Inc.
-#
-# Permission to use, copy, modify, and/or distribute this software for any
-# purpose with or without fee is hereby granted, provided that the above
-# copyright notice and this permission notice appear in all copies.
-#
-# THE SOFTWARE IS PROVIDED "AS IS" AND ISC AND NETWORK ASSOCIATES DISCLAIMS
-# ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
-# WARRANTIES OF MERCHANTABILITY AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE
-# FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-# WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-# ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR
-# IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-#
-#  -----------------------------------------------------------------------------
-#
-# Copyright (C) 2002 Stichting NLnet, Netherlands, stichting at nlnet.nl.
-#
-# Permission to use, copy, modify, and distribute this software for any
-# purpose with or without fee is hereby granted, provided that the
-# above copyright notice and this permission notice appear in all
-# copies.
-#
-# THE SOFTWARE IS PROVIDED "AS IS" AND STICHTING NLNET
-# DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL
-# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL
-# STICHTING NLNET BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR
-# CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS
-# OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
-# OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE
-# USE OR PERFORMANCE OF THIS SOFTWARE.
-#
-# The development of Dynamically Loadable Zones (DLZ) for Bind 9 was
-# conceived and contributed by Rob Butler.
-#
-# Permission to use, copy, modify, and distribute this software for any
-# purpose with or without fee is hereby granted, provided that the
-# above copyright notice and this permission notice appear in all
-# copies.
-#
-# THE SOFTWARE IS PROVIDED "AS IS" AND ROB BUTLER
-# DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL
-# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL
-# ROB BUTLER BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR
-# CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS
-# OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
-# OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE
-# USE OR PERFORMANCE OF THIS SOFTWARE.
-#
-#  -----------------------------------------------------------------------------
-#
-# Copyright (c) 1987, 1990, 1993, 1994
-#      The Regents of the University of California.  All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in the
-#    documentation and/or other materials provided with the distribution.
-# 3. All advertising materials mentioning features or use of this software
-#    must display the following acknowledgement:
-#      This product includes software developed by the University of
-#      California, Berkeley and its contributors.
-# 4. Neither the name of the University nor the names of its contributors
-#    may be used to endorse or promote products derived from this software
-#    without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
-# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-# ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
-# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-# SUCH DAMAGE.
-#
-#  -----------------------------------------------------------------------------
-#
-# Copyright (C) The Internet Society 2005.  This version of
-# this module is part of RFC 4178; see the RFC itself for
-# full legal notices.
-#
-# (The above copyright notice is per RFC 3978 5.6 (a), q.v.)
-#
-#  -----------------------------------------------------------------------------
-#
-# Copyright (c) 2004 Masarykova universita
-# (Masaryk University, Brno, Czech Republic)
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions are met:
-#
-# 1. Redistributions of source code must retain the above copyright notice,
-#    this list of conditions and the following disclaimer.
-#
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in the
-#    documentation and/or other materials provided with the distribution.
-#
-# 3. Neither the name of the University nor the names of its contributors may
-#    be used to endorse or promote products derived from this software
-#    without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
-# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-# POSSIBILITY OF SUCH DAMAGE.
-#
-#  -----------------------------------------------------------------------------
-#
-# Copyright (c) 1997 - 2003 Kungliga Tekniska H\xF6gskolan
-# (Royal Institute of Technology, Stockholm, Sweden).
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in the
-#    documentation and/or other materials provided with the distribution.
-#
-# 3. Neither the name of the Institute nor the names of its contributors
-#    may be used to endorse or promote products derived from this software
-#    without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
-# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-# ARE DISCLAIMED.  IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
-# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-# SUCH DAMAGE.
-#
-#  -----------------------------------------------------------------------------
-#
-# Copyright (c) 1998 Doug Rabson
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in the
-#    documentation and/or other materials provided with the distribution.
-#
-# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
-# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-# ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
-# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-# SUCH DAMAGE.
-#
-#  -----------------------------------------------------------------------------
-#
-# Copyright ((c)) 2002, Rice University
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions are
-# met:
-#
-#     * Redistributions of source code must retain the above copyright
-#     notice, this list of conditions and the following disclaimer.
-#
-#     * Redistributions in binary form must reproduce the above
-#     copyright notice, this list of conditions and the following
-#     disclaimer in the documentation and/or other materials provided
-#     with the distribution.
-#
-#     * Neither the name of Rice University (RICE) nor the names of its
-#     contributors may be used to endorse or promote products derived
-#     from this software without specific prior written permission.
-#
-#
-# This software is provided by RICE and the contributors on an "as is"
-# basis, without any representations or warranties of any kind, express
-# or implied including, but not limited to, representations or
-# warranties of non-infringement, merchantability or fitness for a
-# particular purpose. In no event shall RICE or contributors be liable
-# for any direct, indirect, incidental, special, exemplary, or
-# consequential damages (including, but not limited to, procurement of
-# substitute goods or services; loss of use, data, or profits; or
-# business interruption) however caused and on any theory of liability,
-# whether in contract, strict liability, or tort (including negligence
-# or otherwise) arising in any way out of the use of this software, even
-# if advised of the possibility of such damage.
-#
-#  -----------------------------------------------------------------------------
-#
-# Copyright (c) 1993 by Digital Equipment Corporation.
-#
-# Permission to use, copy, modify, and distribute this software for any
-# purpose with or without fee is hereby granted, provided that the above
-# copyright notice and this permission notice appear in all copies, and that
-# the name of Digital Equipment Corporation not be used in advertising or
-# publicity pertaining to distribution of the document or software without
-# specific, written prior permission.
-#
-# THE SOFTWARE IS PROVIDED "AS IS" AND DIGITAL EQUIPMENT CORP. DISCLAIMS ALL
-# WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES
-# OF MERCHANTABILITY AND FITNESS.   IN NO EVENT SHALL DIGITAL EQUIPMENT
-# CORPORATION BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
-# DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
-# PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS
-# ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
-# SOFTWARE.
-#
-#  -----------------------------------------------------------------------------
-#
-# Copyright 2000 Aaron D. Gifford.  All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in the
-#    documentation and/or other materials provided with the distribution.
-# 3. Neither the name of the copyright holder nor the names of contributors
-#    may be used to endorse or promote products derived from this software
-#    without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE AUTHOR(S) AND CONTRIBUTOR(S) ``AS IS'' AND
-# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-# ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR(S) OR CONTRIBUTOR(S) BE LIABLE
-# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-# SUCH DAMAGE.
-#
-#  -----------------------------------------------------------------------------
-#
-# Copyright (c) 1998 Doug Rabson.
-# Copyright (c) 2001 Jake Burkholder.
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in the
-#    documentation and/or other materials provided with the distribution.
-#
-# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
-# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-# ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
-# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-# SUCH DAMAGE.
-#
-#  -----------------------------------------------------------------------------
-#
-# Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in the
-#    documentation and/or other materials provided with the distribution.
-# 3. Neither the name of the project nor the names of its contributors
-#    may be used to endorse or promote products derived from this software
-#    without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
-# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-# ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
-# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-# SUCH DAMAGE.
-#
-#  -----------------------------------------------------------------------------
-#
-# Copyright (c) 1999-2000 by Nortel Networks Corporation
-#
-# Permission to use, copy, modify, and distribute this software for any
-# purpose with or without fee is hereby granted, provided that the above
-# copyright notice and this permission notice appear in all copies.
-#
-# THE SOFTWARE IS PROVIDED "AS IS" AND NORTEL NETWORKS DISCLAIMS
-# ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES
-# OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL NORTEL NETWORKS
-# BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES
-# OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
-# WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,
-# ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
-# SOFTWARE.
-#
-#  -----------------------------------------------------------------------------
-#
-# Copyright (c) 2000-2002 Japan Network Information Center.  All rights reserved.
-#
-# By using this file, you agree to the terms and conditions set forth bellow.
-#
-#                         LICENSE TERMS AND CONDITIONS
-#
-# The following License Terms and Conditions apply, unless a different
-# license is obtained from Japan Network Information Center ("JPNIC"),
-# a Japanese association, Kokusai-Kougyou-Kanda Bldg 6F, 2-3-4 Uchi-Kanda,
-# Chiyoda-ku, Tokyo 101-0047, Japan.
-#
-# 1. Use, Modification and Redistribution (including distribution of any
-#    modified or derived work) in source and/or binary forms is permitted
-#    under this License Terms and Conditions.
-#
-# 2. Redistribution of source code must retain the copyright notices as they
-#    appear in each source code file, this License Terms and Conditions.
-#
-# 3. Redistribution in binary form must reproduce the Copyright Notice,
-#    this License Terms and Conditions, in the documentation and/or other
-#    materials provided with the distribution.  For the purposes of binary
-#    distribution the "Copyright Notice" refers to the following language:
-#    "Copyright (c) 2000-2002 Japan Network Information Center.  All rights
-#    reserved."
-#
-# 4. The name of JPNIC may not be used to endorse or promote products
-#    derived from this Software without specific prior written approval of
-#    JPNIC.
-#
-# 5. Disclaimer/Limitation of Liability: THIS SOFTWARE IS PROVIDED BY JPNIC
-#    "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-#    LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
-#    PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL JPNIC BE LIABLE
-#    FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-#    CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-#    SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
-#    BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#    WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#    OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#    ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
-#
-#  -----------------------------------------------------------------------------
-#
-# Copyright (C) 2004  Nominet, Ltd.
-#
-# Permission to use, copy, modify, and distribute this software for any
-# purpose with or without fee is hereby granted, provided that the above
-# copyright notice and this permission notice appear in all copies.
-#
-# THE SOFTWARE IS PROVIDED "AS IS" AND NOMINET DISCLAIMS ALL WARRANTIES WITH
-# REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
-# AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
-# INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
-# LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
-# OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-# PERFORMANCE OF THIS SOFTWARE.
-#
-#  -----------------------------------------------------------------------------
-#
-# Portions Copyright RSA Security Inc.
-#
-# License to copy and use this software is granted provided that it is
-# identified as "RSA Security Inc. PKCS #11 Cryptographic Token Interface
-# (Cryptoki)" in all material mentioning or referencing this software.
-#
-# License is also granted to make and use derivative works provided that
-# such works are identified as "derived from the RSA Security Inc. PKCS #11
-# Cryptographic Token Interface (Cryptoki)" in all material mentioning or
-# referencing the derived work.
-#
-# RSA Security Inc. makes no representations concerning either the
-# merchantability of this software or the suitability of this software for
-# any particular purpose. It is provided "as is" without express or implied
-# warranty of any kind.
-#
-#  -----------------------------------------------------------------------------
-#
-# Copyright (c) 1996, David Mazieres <dm at uun.org>
-# Copyright (c) 2008, Damien Miller <djm at openbsd.org>
-#
-# Permission to use, copy, modify, and distribute this software for any
-# purpose with or without fee is hereby granted, provided that the above
-# copyright notice and this permission notice appear in all copies.
-#
-# THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-# WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-# MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-# ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-# WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-# ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
-# OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-#
-# -----------------------------------------------------------------------------
-#
-# Copyright (c) 2000-2001 The OpenSSL Project.  All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in
-#    the documentation and/or other materials provided with the
-#    distribution.
-#
-# 3. All advertising materials mentioning features or use of this
-#    software must display the following acknowledgment:
-#    "This product includes software developed by the OpenSSL Project
-#    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
-#
-# 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
-#    endorse or promote products derived from this software without
-#    prior written permission. For written permission, please contact
-#    licensing at OpenSSL.org.
-#
-# 5. Products derived from this software may not be called "OpenSSL"
-#    nor may "OpenSSL" appear in their names without prior written
-#    permission of the OpenSSL Project.
-#
-# 6. Redistributions of any form whatsoever must retain the following
-#    acknowledgment:
-#    "This product includes software developed by the OpenSSL Project
-#    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
-#
-# THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
-# EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-# PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
-# ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
-# OF THE POSSIBILITY OF SUCH DAMAGE.
-#
-# From configure.in Revision: 1.512.8.15 .
-# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.69.
-#
-#
-# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc.
-#
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-## -------------------- ##
-## M4sh Initialization. ##
-## -------------------- ##
-
-# Be more Bourne compatible
-DUALCASE=1; export DUALCASE # for MKS sh
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
-  emulate sh
-  NULLCMD=:
-  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
-  # is contrary to our usage.  Disable this feature.
-  alias -g '${1+"$@"}'='"$@"'
-  setopt NO_GLOB_SUBST
-else
-  case `(set -o) 2>/dev/null` in #(
-  *posix*) :
-    set -o posix ;; #(
-  *) :
-     ;;
-esac
-fi
-
-
-as_nl='
-'
-export as_nl
-# Printing a long string crashes Solaris 7 /usr/bin/printf.
-as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
-# Prefer a ksh shell builtin over an external printf program on Solaris,
-# but without wasting forks for bash or zsh.
-if test -z "$BASH_VERSION$ZSH_VERSION" \
-    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
-  as_echo='print -r --'
-  as_echo_n='print -rn --'
-elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
-  as_echo='printf %s\n'
-  as_echo_n='printf %s'
-else
-  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
-    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
-    as_echo_n='/usr/ucb/echo -n'
-  else
-    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
-    as_echo_n_body='eval
-      arg=$1;
-      case $arg in #(
-      *"$as_nl"*)
-	expr "X$arg" : "X\\(.*\\)$as_nl";
-	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
-      esac;
-      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
-    '
-    export as_echo_n_body
-    as_echo_n='sh -c $as_echo_n_body as_echo'
-  fi
-  export as_echo_body
-  as_echo='sh -c $as_echo_body as_echo'
-fi
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
-  PATH_SEPARATOR=:
-  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
-    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
-      PATH_SEPARATOR=';'
-  }
-fi
-
-
-# IFS
-# We need space, tab and new line, in precisely that order.  Quoting is
-# there to prevent editors from complaining about space-tab.
-# (If _AS_PATH_WALK were called with IFS unset, it would disable word
-# splitting by setting IFS to empty value.)
-IFS=" ""	$as_nl"
-
-# Find who we are.  Look in the path if we contain no directory separator.
-as_myself=
-case $0 in #((
-  *[\\/]* ) as_myself=$0 ;;
-  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-  done
-IFS=$as_save_IFS
-
-     ;;
-esac
-# We did not find ourselves, most probably we were run as `sh COMMAND'
-# in which case we are not to be found in the path.
-if test "x$as_myself" = x; then
-  as_myself=$0
-fi
-if test ! -f "$as_myself"; then
-  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
-  exit 1
-fi
-
-# Unset variables that we do not need and which cause bugs (e.g. in
-# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
-# suppresses any "Segmentation fault" message there.  '((' could
-# trigger a bug in pdksh 5.2.14.
-for as_var in BASH_ENV ENV MAIL MAILPATH
-do eval test x\${$as_var+set} = xset \
-  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
-done
-PS1='$ '
-PS2='> '
-PS4='+ '
-
-# NLS nuisances.
-LC_ALL=C
-export LC_ALL
-LANGUAGE=C
-export LANGUAGE
-
-# CDPATH.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-# Use a proper internal environment variable to ensure we don't fall
-  # into an infinite loop, continuously re-executing ourselves.
-  if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then
-    _as_can_reexec=no; export _as_can_reexec;
-    # We cannot yet assume a decent shell, so we have to provide a
-# neutralization value for shells without unset; and this also
-# works around shells that cannot unset nonexistent variables.
-# Preserve -v and -x to the replacement shell.
-BASH_ENV=/dev/null
-ENV=/dev/null
-(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
-case $- in # ((((
-  *v*x* | *x*v* ) as_opts=-vx ;;
-  *v* ) as_opts=-v ;;
-  *x* ) as_opts=-x ;;
-  * ) as_opts= ;;
-esac
-exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
-# Admittedly, this is quite paranoid, since all the known shells bail
-# out after a failed `exec'.
-$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
-as_fn_exit 255
-  fi
-  # We don't want this to propagate to other subprocesses.
-          { _as_can_reexec=; unset _as_can_reexec;}
-if test "x$CONFIG_SHELL" = x; then
-  as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
-  emulate sh
-  NULLCMD=:
-  # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
-  # is contrary to our usage.  Disable this feature.
-  alias -g '\${1+\"\$@\"}'='\"\$@\"'
-  setopt NO_GLOB_SUBST
-else
-  case \`(set -o) 2>/dev/null\` in #(
-  *posix*) :
-    set -o posix ;; #(
-  *) :
-     ;;
-esac
-fi
-"
-  as_required="as_fn_return () { (exit \$1); }
-as_fn_success () { as_fn_return 0; }
-as_fn_failure () { as_fn_return 1; }
-as_fn_ret_success () { return 0; }
-as_fn_ret_failure () { return 1; }
-
-exitcode=0
-as_fn_success || { exitcode=1; echo as_fn_success failed.; }
-as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
-as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
-as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
-if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
-
-else
-  exitcode=1; echo positional parameters were not saved.
-fi
-test x\$exitcode = x0 || exit 1
-test -x / || exit 1"
-  as_suggested="  as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
-  as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
-  eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
-  test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
-
-  test -n \"\${ZSH_VERSION+set}\${BASH_VERSION+set}\" || (
-    ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
-    ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
-    ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
-    PATH=/empty FPATH=/empty; export PATH FPATH
-    test \"X\`printf %s \$ECHO\`\" = \"X\$ECHO\" \\
-      || test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" ) || exit 1
-test \$(( 1 + 1 )) = 2 || exit 1"
-  if (eval "$as_required") 2>/dev/null; then :
-  as_have_required=yes
-else
-  as_have_required=no
-fi
-  if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :
-
-else
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-as_found=false
-for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  as_found=:
-  case $as_dir in #(
-	 /*)
-	   for as_base in sh bash ksh sh5; do
-	     # Try only shells that exist, to save several forks.
-	     as_shell=$as_dir/$as_base
-	     if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
-		    { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
-  CONFIG_SHELL=$as_shell as_have_required=yes
-		   if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :
-  break 2
-fi
-fi
-	   done;;
-       esac
-  as_found=false
-done
-$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
-	      { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
-  CONFIG_SHELL=$SHELL as_have_required=yes
-fi; }
-IFS=$as_save_IFS
-
-
-      if test "x$CONFIG_SHELL" != x; then :
-  export CONFIG_SHELL
-             # We cannot yet assume a decent shell, so we have to provide a
-# neutralization value for shells without unset; and this also
-# works around shells that cannot unset nonexistent variables.
-# Preserve -v and -x to the replacement shell.
-BASH_ENV=/dev/null
-ENV=/dev/null
-(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
-case $- in # ((((
-  *v*x* | *x*v* ) as_opts=-vx ;;
-  *v* ) as_opts=-v ;;
-  *x* ) as_opts=-x ;;
-  * ) as_opts= ;;
-esac
-exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
-# Admittedly, this is quite paranoid, since all the known shells bail
-# out after a failed `exec'.
-$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
-exit 255
-fi
-
-    if test x$as_have_required = xno; then :
-  $as_echo "$0: This script requires a shell more modern than all"
-  $as_echo "$0: the shells that I found on your system."
-  if test x${ZSH_VERSION+set} = xset ; then
-    $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
-    $as_echo "$0: be upgraded to zsh 4.3.4 or later."
-  else
-    $as_echo "$0: Please tell bug-autoconf at gnu.org about your system,
-$0: including any error possibly output before this
-$0: message. Then install a modern shell, or manually run
-$0: the script under such a shell if you do have one."
-  fi
-  exit 1
-fi
-fi
-fi
-SHELL=${CONFIG_SHELL-/bin/sh}
-export SHELL
-# Unset more variables known to interfere with behavior of common tools.
-CLICOLOR_FORCE= GREP_OPTIONS=
-unset CLICOLOR_FORCE GREP_OPTIONS
-
-## --------------------- ##
-## M4sh Shell Functions. ##
-## --------------------- ##
-# as_fn_unset VAR
-# ---------------
-# Portably unset VAR.
-as_fn_unset ()
-{
-  { eval $1=; unset $1;}
-}
-as_unset=as_fn_unset
-
-# as_fn_set_status STATUS
-# -----------------------
-# Set $? to STATUS, without forking.
-as_fn_set_status ()
-{
-  return $1
-} # as_fn_set_status
-
-# as_fn_exit STATUS
-# -----------------
-# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
-as_fn_exit ()
-{
-  set +e
-  as_fn_set_status $1
-  exit $1
-} # as_fn_exit
-
-# as_fn_mkdir_p
-# -------------
-# Create "$as_dir" as a directory, including parents if necessary.
-as_fn_mkdir_p ()
-{
-
-  case $as_dir in #(
-  -*) as_dir=./$as_dir;;
-  esac
-  test -d "$as_dir" || eval $as_mkdir_p || {
-    as_dirs=
-    while :; do
-      case $as_dir in #(
-      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
-      *) as_qdir=$as_dir;;
-      esac
-      as_dirs="'$as_qdir' $as_dirs"
-      as_dir=`$as_dirname -- "$as_dir" ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$as_dir" : 'X\(//\)[^/]' \| \
-	 X"$as_dir" : 'X\(//\)$' \| \
-	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$as_dir" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\/\)[^/].*/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\/\)$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\).*/{
-	    s//\1/
-	    q
-	  }
-	  s/.*/./; q'`
-      test -d "$as_dir" && break
-    done
-    test -z "$as_dirs" || eval "mkdir $as_dirs"
-  } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
-
-
-} # as_fn_mkdir_p
-
-# as_fn_executable_p FILE
-# -----------------------
-# Test if FILE is an executable regular file.
-as_fn_executable_p ()
-{
-  test -f "$1" && test -x "$1"
-} # as_fn_executable_p
-# as_fn_append VAR VALUE
-# ----------------------
-# Append the text in VALUE to the end of the definition contained in VAR. Take
-# advantage of any shell optimizations that allow amortized linear growth over
-# repeated appends, instead of the typical quadratic growth present in naive
-# implementations.
-if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
-  eval 'as_fn_append ()
-  {
-    eval $1+=\$2
-  }'
-else
-  as_fn_append ()
-  {
-    eval $1=\$$1\$2
-  }
-fi # as_fn_append
-
-# as_fn_arith ARG...
-# ------------------
-# Perform arithmetic evaluation on the ARGs, and store the result in the
-# global $as_val. Take advantage of shells that can avoid forks. The arguments
-# must be portable across $(()) and expr.
-if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
-  eval 'as_fn_arith ()
-  {
-    as_val=$(( $* ))
-  }'
-else
-  as_fn_arith ()
-  {
-    as_val=`expr "$@" || test $? -eq 1`
-  }
-fi # as_fn_arith
-
-
-# as_fn_error STATUS ERROR [LINENO LOG_FD]
-# ----------------------------------------
-# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
-# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
-# script with STATUS, using 1 if that was 0.
-as_fn_error ()
-{
-  as_status=$1; test $as_status -eq 0 && as_status=1
-  if test "$4"; then
-    as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-    $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
-  fi
-  $as_echo "$as_me: error: $2" >&2
-  as_fn_exit $as_status
-} # as_fn_error
-
-if expr a : '\(a\)' >/dev/null 2>&1 &&
-   test "X`expr 00001 : '.*\(...\)'`" = X001; then
-  as_expr=expr
-else
-  as_expr=false
-fi
-
-if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
-  as_basename=basename
-else
-  as_basename=false
-fi
-
-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
-  as_dirname=dirname
-else
-  as_dirname=false
-fi
-
-as_me=`$as_basename -- "$0" ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
-	 X"$0" : 'X\(//\)$' \| \
-	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X/"$0" |
-    sed '/^.*\/\([^/][^/]*\)\/*$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\/\(\/\/\)$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\/\(\/\).*/{
-	    s//\1/
-	    q
-	  }
-	  s/.*/./; q'`
-
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-
-  as_lineno_1=$LINENO as_lineno_1a=$LINENO
-  as_lineno_2=$LINENO as_lineno_2a=$LINENO
-  eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
-  test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
-  # Blame Lee E. McMahon (1931-1989) for sed's syntax.  :-)
-  sed -n '
-    p
-    /[$]LINENO/=
-  ' <$as_myself |
-    sed '
-      s/[$]LINENO.*/&-/
-      t lineno
-      b
-      :lineno
-      N
-      :loop
-      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
-      t loop
-      s/-\n.*//
-    ' >$as_me.lineno &&
-  chmod +x "$as_me.lineno" ||
-    { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
-
-  # If we had to re-execute with $CONFIG_SHELL, we're ensured to have
-  # already done that, so ensure we don't try to do so again and fall
-  # in an infinite loop.  This has already happened in practice.
-  _as_can_reexec=no; export _as_can_reexec
-  # Don't try to exec as it changes $[0], causing all sort of problems
-  # (the dirname of $[0] is not the place where we might find the
-  # original and so on.  Autoconf is especially sensitive to this).
-  . "./$as_me.lineno"
-  # Exit status is that of the last command.
-  exit
-}
-
-ECHO_C= ECHO_N= ECHO_T=
-case `echo -n x` in #(((((
--n*)
-  case `echo 'xy\c'` in
-  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
-  xy)  ECHO_C='\c';;
-  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
-       ECHO_T='	';;
-  esac;;
-*)
-  ECHO_N='-n';;
-esac
-
-rm -f conf$$ conf$$.exe conf$$.file
-if test -d conf$$.dir; then
-  rm -f conf$$.dir/conf$$.file
-else
-  rm -f conf$$.dir
-  mkdir conf$$.dir 2>/dev/null
-fi
-if (echo >conf$$.file) 2>/dev/null; then
-  if ln -s conf$$.file conf$$ 2>/dev/null; then
-    as_ln_s='ln -s'
-    # ... but there are two gotchas:
-    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
-    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
-    # In both cases, we have to default to `cp -pR'.
-    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
-      as_ln_s='cp -pR'
-  elif ln conf$$.file conf$$ 2>/dev/null; then
-    as_ln_s=ln
-  else
-    as_ln_s='cp -pR'
-  fi
-else
-  as_ln_s='cp -pR'
-fi
-rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
-rmdir conf$$.dir 2>/dev/null
-
-if mkdir -p . 2>/dev/null; then
-  as_mkdir_p='mkdir -p "$as_dir"'
-else
-  test -d ./-p && rmdir ./-p
-  as_mkdir_p=false
-fi
-
-as_test_x='test -x'
-as_executable_p=as_fn_executable_p
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
-SHELL=${CONFIG_SHELL-/bin/sh}
-
-
-test -n "$DJDIR" || exec 7<&0 </dev/null
-exec 6>&1
-
-# Name of the host.
-# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,
-# so uname gets run too.
-ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
-
-#
-# Initializations.
-#
-ac_default_prefix=/usr/local
-ac_clean_files=
-ac_config_libobj_dir=.
-LIBOBJS=
-cross_compiling=no
-subdirs=
-MFLAGS=
-MAKEFLAGS=
-
-# Identity of this package.
-PACKAGE_NAME=
-PACKAGE_TARNAME=
-PACKAGE_VERSION=
-PACKAGE_STRING=
-PACKAGE_BUGREPORT=
-PACKAGE_URL=
-
-ac_unique_file="lib/dns/name.c"
-# Factoring default headers for most tests.
-ac_includes_default="\
-#include <stdio.h>
-#ifdef HAVE_SYS_TYPES_H
-# include <sys/types.h>
-#endif
-#ifdef HAVE_SYS_STAT_H
-# include <sys/stat.h>
-#endif
-#ifdef STDC_HEADERS
-# include <stdlib.h>
-# include <stddef.h>
-#else
-# ifdef HAVE_STDLIB_H
-#  include <stdlib.h>
-# endif
-#endif
-#ifdef HAVE_STRING_H
-# if !defined STDC_HEADERS && defined HAVE_MEMORY_H
-#  include <memory.h>
-# endif
-# include <string.h>
-#endif
-#ifdef HAVE_STRINGS_H
-# include <strings.h>
-#endif
-#ifdef HAVE_INTTYPES_H
-# include <inttypes.h>
-#endif
-#ifdef HAVE_STDINT_H
-# include <stdint.h>
-#endif
-#ifdef HAVE_UNISTD_H
-# include <unistd.h>
-#endif"
-
-ac_subst_vars='LTLIBOBJS
-LIBOBJS
-BUILD_LIBS
-BUILD_LDFLAGS
-BUILD_CPPFLAGS
-BUILD_CFLAGS
-BUILD_CC
-DLZ_SYSTEM_TEST
-DLZ_DRIVER_OBJS
-DLZ_DRIVER_SRCS
-DLZ_DRIVER_LIBS
-DLZ_DRIVER_INCLUDES
-CONTRIB_DLZ
-PG_CONFIG
-SO_TARGETS
-SO_LD
-SO_CFLAGS
-SO
-BIND9_CONFIGARGS
-BIND9_SRCID
-BIND9_VERSION
-BIND9_DESCRIPTION
-BIND9_PRODUCT
-BIND9_BIND9_BUILDINCLUDE
-BIND9_LWRES_BUILDINCLUDE
-BIND9_DNS_BUILDINCLUDE
-BIND9_ISCCFG_BUILDINCLUDE
-BIND9_ISCCC_BUILDINCLUDE
-BIND9_ISC_BUILDINCLUDE
-BIND9_TOP_BUILDDIR
-UNITTESTS
-ATFLIBS
-ATFBIN
-ATFBUILD
-IDNLIBS
-XSLT_DB2LATEX_ADMONITIONS
-XSLT_DB2LATEX_STYLE
-XSLT_DOCBOOK_MAKETOC_XHTML
-XSLT_DOCBOOK_MAKETOC_HTML
-XSLT_DOCBOOK_CHUNKTOC_XHTML
-XSLT_DOCBOOK_CHUNKTOC_HTML
-XSLT_DOCBOOK_CHUNK_XHTML
-XSLT_DOCBOOK_CHUNK_HTML
-XSLT_DOCBOOK_STYLE_MAN
-XSLT_DOCBOOK_STYLE_XHTML
-XSLT_DOCBOOK_STYLE_HTML
-DOXYGEN
-XMLLINT
-XSLTPROC
-W3M
-PDFLATEX
-LATEX
-ISC_ARCH_DIR
-ISC_PLATFORM_USEMACASM
-ISC_PLATFORM_USESTDASM
-ISC_PLATFORM_USEOSFASM
-ISC_PLATFORM_USEGCCASM
-ISC_PLATFORM_HAVEATOMICSTORE
-ISC_PLATFORM_HAVECMPXCHG
-ISC_PLATFORM_HAVEXADDQ
-ISC_PLATFORM_HAVEXADD
-ISC_PLATFORM_HAVEIFNAMETOINDEX
-ISC_PLATFORM_HAVESTRINGSH
-ISC_PLATFORM_BRACEPTHREADONCEINIT
-IRS_PLATFORM_USEDECLSPEC
-LWRES_PLATFORM_USEDECLSPEC
-ISC_PLATFORM_USEDECLSPEC
-ISC_PLATFORM_RLIMITTYPE
-ISC_PLATFORM_HAVESYSUNH
-LWRES_PLATFORM_QUADFORMAT
-ISC_PLATFORM_QUADFORMAT
-DST_EXTRA_SRCS
-DST_EXTRA_OBJS
-USE_ISC_SPNEGO
-ISC_EXTRA_SRCS
-ISC_EXTRA_OBJS
-LWRES_PLATFORM_NEEDVSNPRINTF
-ISC_PLATFORM_NEEDVSNPRINTF
-LWRES_PLATFORM_NEEDSPRINTF
-ISC_PLATFORM_NEEDSPRINTF
-ISC_PLATFORM_NEEDSTRLCAT
-ISC_PLATFORM_NEEDSTRLCPY
-GENRANDOMLIB
-LWRES_PLATFORM_NEEDSTRTOUL
-ISC_PLATFORM_NEEDSTRTOUL
-ISC_PLATFORM_NEEDMEMMOVE
-ISC_PLATFORM_NEEDSTRSEP
-ISC_IRS_GETNAMEINFOSOCKLEN
-ISC_LWRES_GETNAMEINFOPROTO
-ISC_LWRES_GETADDRINFOPROTO
-ISC_LWRES_GETIPNODEPROTO
-ISC_LWRES_NEEDHERRNO
-ISC_LWRES_GETHOSTBYADDRVOID
-ISC_LWRES_ENDNETENTINT
-ISC_LWRES_SETNETENTINT
-ISC_LWRES_GETNETBYADDRINADDR
-ISC_LWRES_ENDHOSTENTINT
-ISC_LWRES_SETHOSTENTINT
-ISC_LWRES_NEEDRRSETINFO
-ISC_IRS_NEEDADDRINFO
-ISC_LWRES_NEEDADDRINFO
-ISC_PLATFORM_NEEDPORTT
-ISC_PLATFORM_MSGHDRFLAVOR
-LWRES_PLATFORM_HAVESALEN
-ISC_PLATFORM_HAVESALEN
-ISC_PLATFORM_NEEDPTON
-ISC_PLATFORM_NEEDNTOP
-ISC_PLATFORM_HAVEIF_LADDRCONF
-ISC_PLATFORM_HAVEIF_LADDRREQ
-ISC_PLATFORM_HAVESCOPEID
-LWRES_HAVE_SIN6_SCOPE_ID
-ISC_IPV6_C
-ISC_ISCIPV6_O
-ISC_IPV6_O
-ISC_IPV6_H
-ISC_PLATFORM_FIXIN6ISADDR
-ISC_PLATFORM_HAVEIN6PKTINFO
-LWRES_PLATFORM_NEEDIN6ADDRLOOPBACK
-ISC_PLATFORM_NEEDIN6ADDRLOOPBACK
-LWRES_PLATFORM_NEEDIN6ADDRANY
-ISC_PLATFORM_NEEDIN6ADDRANY
-LWRES_PLATFORM_HAVEINADDR6
-ISC_PLATFORM_HAVEINADDR6
-LWRES_PLATFORM_NEEDNETINET6IN6H
-ISC_PLATFORM_NEEDNETINET6IN6H
-LWRES_PLATFORM_NEEDNETINETIN6H
-ISC_PLATFORM_NEEDNETINETIN6H
-LWRES_PLATFORM_HAVEIPV6
-ISC_PLATFORM_HAVEIPV6
-export_includedir
-export_libdir
-BIND9_CO_RULE
-LIBEXPORT
-LIBTOOL_IN_MAIN
-LIBTOOL_ALLOW_UNDEFINED
-LIBTOOL_MODE_LINK
-LIBTOOL_MODE_INSTALL
-LIBTOOL_MODE_COMPILE
-LIBTOOL_MKDEP_SED
-SA
-A
-O
-ALWAYS_MAKE_SYMTABLE
-MKSYMTBL_PROGRAM
-ISC_PLATFORM_USEBACKTRACE
-PURIFY
-purify_path
-IRIX_DNSSEC_WARNINGS_HACK
-MKDEPPROG
-MKDEPCFLAGS
-MKDEPCC
-ISC_THREAD_DIR
-THREADOPTSRCS
-THREADOPTOBJS
-ISC_PLATFORM_USETHREADS
-ALWAYS_DEFINES
-DNS_CRYPTO_LIBS
-DNS_GSSAPI_LIBS
-DST_GSSAPI_INC
-USE_GSSAPI
-ISC_PLATFORM_KRB5HEADER
-ISC_PLATFORM_GSSAPI_KRB5_HEADER
-ISC_PLATFORM_GSSAPIHEADER
-ISC_PLATFORM_HAVEGSSAPI
-PKCS11_PROVIDER
-PKCS11_TOOLS
-USE_PKCS11
-ISC_OPENSSL_INC
-ISC_PLATFORM_OPENSSLHASH
-OPENSSL_GOST
-OPENSSL_ECDSA
-OPENSSLLINKSRCS
-OPENSSLLINKOBJS
-OPENSSLGOSTLINKSRCS
-OPENSSLGOSTLINKOBJS
-DST_OPENSSL_INC
-USE_OPENSSL
-LWRES_PLATFORM_NEEDSYSSELECTH
-ISC_PLATFORM_NEEDSYSSELECTH
-ISC_PLATFORM_HAVEDEVPOLL
-ISC_PLATFORM_HAVEEPOLL
-ISC_PLATFORM_HAVEKQUEUE
-ISC_PLATFORM_HAVELIFCONF
-ISC_PLATFORM_NORETURN_POST
-ISC_PLATFORM_NORETURN_PRE
-ISC_PLATFORM_HAVELONGLONG
-ISC_SOCKADDR_LEN_T
-PERL
-ETAGS
-LN
-ARFLAGS
-CCOPT
-STD_CWARNINGS
-STD_CDEFINES
-STD_CINCLUDES
-INSTALL_DATA
-INSTALL_SCRIPT
-INSTALL_PROGRAM
-CPP
-OTOOL64
-OTOOL
-LIPO
-NMEDIT
-DSYMUTIL
-MANIFEST_TOOL
-AWK
-RANLIB
-STRIP
-ac_ct_AR
-AR
-DLLTOOL
-OBJDUMP
-LN_S
-NM
-ac_ct_DUMPBIN
-DUMPBIN
-LD
-FGREP
-EGREP
-GREP
-SED
-OBJEXT
-EXEEXT
-ac_ct_CC
-CPPFLAGS
-LDFLAGS
-CFLAGS
-CC
-LIBTOOL
-SET_MAKE
-host_os
-host_vendor
-host_cpu
-host
-build_os
-build_vendor
-build_cpu
-build
-target_alias
-host_alias
-build_alias
-LIBS
-ECHO_T
-ECHO_N
-ECHO_C
-DEFS
-mandir
-localedir
-libdir
-psdir
-pdfdir
-dvidir
-htmldir
-infodir
-docdir
-oldincludedir
-includedir
-localstatedir
-sharedstatedir
-sysconfdir
-datadir
-datarootdir
-libexecdir
-sbindir
-bindir
-program_transform_name
-prefix
-exec_prefix
-PACKAGE_URL
-PACKAGE_BUGREPORT
-PACKAGE_STRING
-PACKAGE_VERSION
-PACKAGE_TARNAME
-PACKAGE_NAME
-PATH_SEPARATOR
-SHELL'
-ac_subst_files='BIND9_MAKE_INCLUDES
-BIND9_MAKE_RULES
-LIBISC_API
-LIBISCCC_API
-LIBISCCFG_API
-LIBDNS_API
-LIBBIND9_API
-LIBLWRES_API
-LIBIRS_API
-DLZ_DRIVER_RULES'
-ac_user_opts='
-enable_option_checking
-enable_shared
-enable_static
-with_pic
-enable_fast_install
-with_gnu_ld
-with_sysroot
-enable_libtool_lock
-enable_libbind
-enable_developer
-enable_kqueue
-enable_epoll
-enable_devpoll
-with_openssl
-enable_openssl_version_check
-with_ecdsa
-with_gost
-enable_openssl_hash
-with_pkcs11
-with_gssapi
-with_randomdev
-enable_threads
-with_libxml2
-enable_largefile
-with_purify
-with_libtool
-enable_backtrace
-enable_symtable
-enable_exportlib
-with_export_libdir
-with_export_includedir
-enable_ipv6
-with_kame
-enable_getifaddrs
-enable_isc_spnego
-enable_chroot
-enable_linux_caps
-with_rlimtype
-enable_atomic
-enable_fixed_rrset
-enable_rpz_nsip
-enable_rpz_nsdname
-enable_filter_aaaa
-with_docbook_xsl
-with_idn
-with_libiconv
-with_iconv
-with_idnlib
-with_atf
-with_dlopen
-with_dlz_postgres
-with_dlz_mysql
-with_dlz_bdb
-with_dlz_filesystem
-with_dlz_ldap
-with_dlz_odbc
-with_dlz_stub
-with_make_clean
-'
-      ac_precious_vars='build_alias
-host_alias
-target_alias
-CC
-CFLAGS
-LDFLAGS
-LIBS
-CPPFLAGS
-CPP'
-
-
-# Initialize some variables set by options.
-ac_init_help=
-ac_init_version=false
-ac_unrecognized_opts=
-ac_unrecognized_sep=
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-cache_file=/dev/null
-exec_prefix=NONE
-no_create=
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-srcdir=
-verbose=
-x_includes=NONE
-x_libraries=NONE
-
-# Installation directory options.
-# These are left unexpanded so users can "make install exec_prefix=/foo"
-# and all the variables that are supposed to be based on exec_prefix
-# by default will actually change.
-# Use braces instead of parens because sh, perl, etc. also accept them.
-# (The list follows the same order as the GNU Coding Standards.)
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datarootdir='${prefix}/share'
-datadir='${datarootdir}'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-docdir='${datarootdir}/doc/${PACKAGE}'
-infodir='${datarootdir}/info'
-htmldir='${docdir}'
-dvidir='${docdir}'
-pdfdir='${docdir}'
-psdir='${docdir}'
-libdir='${exec_prefix}/lib'
-localedir='${datarootdir}/locale'
-mandir='${datarootdir}/man'
-
-ac_prev=
-ac_dashdash=
-for ac_option
-do
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval $ac_prev=\$ac_option
-    ac_prev=
-    continue
-  fi
-
-  case $ac_option in
-  *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
-  *=)   ac_optarg= ;;
-  *)    ac_optarg=yes ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case $ac_dashdash$ac_option in
-  --)
-    ac_dashdash=yes ;;
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir=$ac_optarg ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build_alias ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build_alias=$ac_optarg ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file=$ac_optarg ;;
-
-  --config-cache | -C)
-    cache_file=config.cache ;;
-
-  -datadir | --datadir | --datadi | --datad)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=*)
-    datadir=$ac_optarg ;;
-
-  -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
-  | --dataroo | --dataro | --datar)
-    ac_prev=datarootdir ;;
-  -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
-  | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
-    datarootdir=$ac_optarg ;;
-
-  -disable-* | --disable-*)
-    ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
-    # Reject names that are not valid shell variable names.
-    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
-      as_fn_error $? "invalid feature name: $ac_useropt"
-    ac_useropt_orig=$ac_useropt
-    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
-    case $ac_user_opts in
-      *"
-"enable_$ac_useropt"
-"*) ;;
-      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
-	 ac_unrecognized_sep=', ';;
-    esac
-    eval enable_$ac_useropt=no ;;
-
-  -docdir | --docdir | --docdi | --doc | --do)
-    ac_prev=docdir ;;
-  -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
-    docdir=$ac_optarg ;;
-
-  -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
-    ac_prev=dvidir ;;
-  -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
-    dvidir=$ac_optarg ;;
-
-  -enable-* | --enable-*)
-    ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
-    # Reject names that are not valid shell variable names.
-    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
-      as_fn_error $? "invalid feature name: $ac_useropt"
-    ac_useropt_orig=$ac_useropt
-    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
-    case $ac_user_opts in
-      *"
-"enable_$ac_useropt"
-"*) ;;
-      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
-	 ac_unrecognized_sep=', ';;
-    esac
-    eval enable_$ac_useropt=\$ac_optarg ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix=$ac_optarg ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he | -h)
-    ac_init_help=long ;;
-  -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
-    ac_init_help=recursive ;;
-  -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
-    ac_init_help=short ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host_alias ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host_alias=$ac_optarg ;;
-
-  -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
-    ac_prev=htmldir ;;
-  -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
-  | --ht=*)
-    htmldir=$ac_optarg ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir=$ac_optarg ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir=$ac_optarg ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir=$ac_optarg ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir=$ac_optarg ;;
-
-  -localedir | --localedir | --localedi | --localed | --locale)
-    ac_prev=localedir ;;
-  -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
-    localedir=$ac_optarg ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst | --locals)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
-    localstatedir=$ac_optarg ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir=$ac_optarg ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c | -n)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir=$ac_optarg ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix=$ac_optarg ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix=$ac_optarg ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix=$ac_optarg ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name=$ac_optarg ;;
-
-  -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
-    ac_prev=pdfdir ;;
-  -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
-    pdfdir=$ac_optarg ;;
-
-  -psdir | --psdir | --psdi | --psd | --ps)
-    ac_prev=psdir ;;
-  -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
-    psdir=$ac_optarg ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir=$ac_optarg ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir=$ac_optarg ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site=$ac_optarg ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir=$ac_optarg ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir=$ac_optarg ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target_alias ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target_alias=$ac_optarg ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers | -V)
-    ac_init_version=: ;;
-
-  -with-* | --with-*)
-    ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
-    # Reject names that are not valid shell variable names.
-    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
-      as_fn_error $? "invalid package name: $ac_useropt"
-    ac_useropt_orig=$ac_useropt
-    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
-    case $ac_user_opts in
-      *"
-"with_$ac_useropt"
-"*) ;;
-      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
-	 ac_unrecognized_sep=', ';;
-    esac
-    eval with_$ac_useropt=\$ac_optarg ;;
-
-  -without-* | --without-*)
-    ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
-    # Reject names that are not valid shell variable names.
-    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
-      as_fn_error $? "invalid package name: $ac_useropt"
-    ac_useropt_orig=$ac_useropt
-    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
-    case $ac_user_opts in
-      *"
-"with_$ac_useropt"
-"*) ;;
-      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
-	 ac_unrecognized_sep=', ';;
-    esac
-    eval with_$ac_useropt=no ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes=$ac_optarg ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries=$ac_optarg ;;
-
-  -*) as_fn_error $? "unrecognized option: \`$ac_option'
-Try \`$0 --help' for more information"
-    ;;
-
-  *=*)
-    ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
-    # Reject names that are not valid shell variable names.
-    case $ac_envvar in #(
-      '' | [0-9]* | *[!_$as_cr_alnum]* )
-      as_fn_error $? "invalid variable name: \`$ac_envvar'" ;;
-    esac
-    eval $ac_envvar=\$ac_optarg
-    export $ac_envvar ;;
-
-  *)
-    # FIXME: should be removed in autoconf 3.0.
-    $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
-    expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
-      $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
-    : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}"
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  ac_option=--`echo $ac_prev | sed 's/_/-/g'`
-  as_fn_error $? "missing argument to $ac_option"
-fi
-
-if test -n "$ac_unrecognized_opts"; then
-  case $enable_option_checking in
-    no) ;;
-    fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;;
-    *)     $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
-  esac
-fi
-
-# Check all directory arguments for consistency.
-for ac_var in	exec_prefix prefix bindir sbindir libexecdir datarootdir \
-		datadir sysconfdir sharedstatedir localstatedir includedir \
-		oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
-		libdir localedir mandir
-do
-  eval ac_val=\$$ac_var
-  # Remove trailing slashes.
-  case $ac_val in
-    */ )
-      ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
-      eval $ac_var=\$ac_val;;
-  esac
-  # Be sure to have absolute directory names.
-  case $ac_val in
-    [\\/$]* | ?:[\\/]* )  continue;;
-    NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
-  esac
-  as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val"
-done
-
-# There might be people who depend on the old broken behavior: `$host'
-# used to hold the argument of --host etc.
-# FIXME: To remove some day.
-build=$build_alias
-host=$host_alias
-target=$target_alias
-
-# FIXME: To remove some day.
-if test "x$host_alias" != x; then
-  if test "x$build_alias" = x; then
-    cross_compiling=maybe
-  elif test "x$build_alias" != "x$host_alias"; then
-    cross_compiling=yes
-  fi
-fi
-
-ac_tool_prefix=
-test -n "$host_alias" && ac_tool_prefix=$host_alias-
-
-test "$silent" = yes && exec 6>/dev/null
-
-
-ac_pwd=`pwd` && test -n "$ac_pwd" &&
-ac_ls_di=`ls -di .` &&
-ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
-  as_fn_error $? "working directory cannot be determined"
-test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
-  as_fn_error $? "pwd does not report name of working directory"
-
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then the parent directory.
-  ac_confdir=`$as_dirname -- "$as_myself" ||
-$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$as_myself" : 'X\(//\)[^/]' \| \
-	 X"$as_myself" : 'X\(//\)$' \| \
-	 X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$as_myself" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\/\)[^/].*/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\/\)$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\).*/{
-	    s//\1/
-	    q
-	  }
-	  s/.*/./; q'`
-  srcdir=$ac_confdir
-  if test ! -r "$srcdir/$ac_unique_file"; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r "$srcdir/$ac_unique_file"; then
-  test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
-  as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir"
-fi
-ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
-ac_abs_confdir=`(
-	cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg"
-	pwd)`
-# When building in place, set srcdir=.
-if test "$ac_abs_confdir" = "$ac_pwd"; then
-  srcdir=.
-fi
-# Remove unnecessary trailing slashes from srcdir.
-# Double slashes in file names in object file debugging info
-# mess up M-x gdb in Emacs.
-case $srcdir in
-*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
-esac
-for ac_var in $ac_precious_vars; do
-  eval ac_env_${ac_var}_set=\${${ac_var}+set}
-  eval ac_env_${ac_var}_value=\$${ac_var}
-  eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
-  eval ac_cv_env_${ac_var}_value=\$${ac_var}
-done
-
-#
-# Report the --help message.
-#
-if test "$ac_init_help" = "long"; then
-  # Omit some internal or obsolete options to make the list less imposing.
-  # This message is too long to be a string in the A/UX 3.1 sh.
-  cat <<_ACEOF
-\`configure' configures this package to adapt to many kinds of systems.
-
-Usage: $0 [OPTION]... [VAR=VALUE]...
-
-To assign environment variables (e.g., CC, CFLAGS...), specify them as
-VAR=VALUE.  See below for descriptions of some of the useful variables.
-
-Defaults for the options are specified in brackets.
-
-Configuration:
-  -h, --help              display this help and exit
-      --help=short        display options specific to this package
-      --help=recursive    display the short help of all the included packages
-  -V, --version           display version information and exit
-  -q, --quiet, --silent   do not print \`checking ...' messages
-      --cache-file=FILE   cache test results in FILE [disabled]
-  -C, --config-cache      alias for \`--cache-file=config.cache'
-  -n, --no-create         do not create output files
-      --srcdir=DIR        find the sources in DIR [configure dir or \`..']
-
-Installation directories:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [PREFIX]
-
-By default, \`make install' will install all the files in
-\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc.  You can specify
-an installation prefix other than \`$ac_default_prefix' using \`--prefix',
-for instance \`--prefix=\$HOME'.
-
-For better control, use the options below.
-
-Fine tuning of the installation directories:
-  --bindir=DIR            user executables [EPREFIX/bin]
-  --sbindir=DIR           system admin executables [EPREFIX/sbin]
-  --libexecdir=DIR        program executables [EPREFIX/libexec]
-  --sysconfdir=DIR        read-only single-machine data [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data [PREFIX/var]
-  --libdir=DIR            object code libraries [EPREFIX/lib]
-  --includedir=DIR        C header files [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc [/usr/include]
-  --datarootdir=DIR       read-only arch.-independent data root [PREFIX/share]
-  --datadir=DIR           read-only architecture-independent data [DATAROOTDIR]
-  --infodir=DIR           info documentation [DATAROOTDIR/info]
-  --localedir=DIR         locale-dependent data [DATAROOTDIR/locale]
-  --mandir=DIR            man documentation [DATAROOTDIR/man]
-  --docdir=DIR            documentation root [DATAROOTDIR/doc/PACKAGE]
-  --htmldir=DIR           html documentation [DOCDIR]
-  --dvidir=DIR            dvi documentation [DOCDIR]
-  --pdfdir=DIR            pdf documentation [DOCDIR]
-  --psdir=DIR             ps documentation [DOCDIR]
-_ACEOF
-
-  cat <<\_ACEOF
-
-System types:
-  --build=BUILD     configure for building on BUILD [guessed]
-  --host=HOST       cross-compile to build programs to run on HOST [BUILD]
-_ACEOF
-fi
-
-if test -n "$ac_init_help"; then
-
-  cat <<\_ACEOF
-
-Optional Features:
-  --disable-option-checking  ignore unrecognized --enable/--with options
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --enable-shared[=PKGS]  build shared libraries [default=yes]
-  --enable-static[=PKGS]  build static libraries [default=yes]
-  --enable-fast-install[=PKGS]
-                          optimize for fast installation [default=yes]
-  --disable-libtool-lock  avoid locking (might break parallel builds)
-  --enable-libbind	  deprecated
-  --enable-developer      enable developer build settings
-  --enable-kqueue         use BSD kqueue when available [default=yes]
-  --enable-epoll          use Linux epoll when available [default=auto]
-  --enable-devpoll        use /dev/poll when available [default=yes]
-  --enable-openssl-version-check
-                          Check OpenSSL Version [default=yes]
-  --enable-openssl-hash   use OpenSSL for hash functions [default=no]
-  --enable-threads        enable multithreading
-  --enable-largefile	  64-bit file support
-  --enable-backtrace      log stack backtrace on abort [default=yes]
-  --enable-symtable       use internal symbol table for backtrace
-                          [all|minimal(default)|none]
-  --enable-exportlib	  build exportable library (GNU make required)
-                          [default=no]
-  --enable-ipv6           use IPv6 default=autodetect
-  --enable-getifaddrs     Enable the use of getifaddrs() [yes|no].
-  --disable-isc-spnego    use SPNEGO from GSSAPI library
-  --disable-chroot        disable chroot
-  --disable-linux-caps	  disable linux capabilities
-  --enable-atomic	  enable machine specific atomic operations
-			  [default=autodetect]
-  --enable-fixed-rrset    enable fixed rrset ordering
-			  [default=no]
-  --disable-rpz-nsip	  disable rpz-nsip rules [default=enabled]
-  --disable-rpz-nsdname	  disable rpz-nsdname rules [default=enabled]
-  --enable-filter-aaaa    enable filtering of AAAA records over IPv4
-			  [default=no]
-
-Optional Packages:
-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --with-pic[=PKGS]       try to use only PIC/non-PIC objects [default=use
-                          both]
-  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]
-  --with-sysroot=DIR Search for dependent libraries within DIR
-                        (or the compiler's sysroot if not specified).
-  --with-openssl=PATH     Build with OpenSSL yes|no|path.
-			  (Required for DNSSEC)
-  --with-ecdsa            OpenSSL ECDSA
-  --with-gost             OpenSSL GOST
-  --with-pkcs11=PATH      Build with PKCS11 support yes|no|path
-                          (PATH is for the PKCS11 provider)
-  --with-gssapi=PATH      Specify path for system-supplied GSSAPI [default=yes]
-  --with-randomdev=PATH   Specify path for random device
-  --with-libxml2=PATH     Build with libxml2 library yes|no|path
-  --with-purify=PATH      use Rational purify
-  --with-libtool          use GNU libtool
-  --with-export-libdir=PATH
-                          installation directory for the export library
-                          [EPREFIX/lib/bind9]
-  --with-export-includedir=PATH
-                          installation directory for the header files of the
-                          export library [PREFIX/include/bind9]
-  --with-kame=PATH	  use Kame IPv6 default path /usr/local/v6
-
-  --with-docbook-xsl=PATH Specify path for Docbook-XSL stylesheets
-  --with-idn=MPREFIX      enable IDN support using idnkit default PREFIX
-  --with-libiconv=IPREFIX GNU libiconv are in IPREFIX default PREFIX
-  --with-iconv=LIBSPEC    specify iconv library default -liconv
-  --with-idnlib=ARG       specify libidnkit
-  --with-atf=ARG          Automated Test Framework support
-  --with-dlopen=ARG       Support dynamically loadable DLZ drivers
-  --with-dlz-postgres=PATH   Build with Postgres DLZ driver yes|no|path.
-                               (Required to use Postgres with DLZ)
-  --with-dlz-mysql=PATH   Build with MySQL DLZ driver yes|no|path.
-                               (Required to use MySQL with DLZ)
-  --with-dlz-bdb=PATH   Build with Berkeley DB DLZ driver yes|no|path.
-                               (Required to use Berkeley DB with DLZ)
-  --with-dlz-filesystem=PATH   Build with filesystem DLZ driver yes|no.
-                               (Required to use file system driver with DLZ)
-  --with-dlz-ldap=PATH   Build with LDAP DLZ driver yes|no|path.
-                               (Required to use LDAP with DLZ)
-  --with-dlz-odbc=PATH   Build with ODBC DLZ driver yes|no|path.
-                               (Required to use ODBC with DLZ)
-  --with-dlz-stub=PATH   Build with stub DLZ driver yes|no.
-                               (Required to use stub driver with DLZ)
-  --with-make-clean      Run "make clean" at end of configure [yes|no].
-
-Some influential environment variables:
-  CC          C compiler command
-  CFLAGS      C compiler flags
-  LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
-              nonstandard directory <lib dir>
-  LIBS        libraries to pass to the linker, e.g. -l<library>
-  CPPFLAGS    (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
-              you have headers in a nonstandard directory <include dir>
-  CPP         C preprocessor
-
-Use these variables to override the choices made by `configure' or to help
-it to find libraries and programs with nonstandard names/locations.
-
-Report bugs to the package provider.
-_ACEOF
-ac_status=$?
-fi
-
-if test "$ac_init_help" = "recursive"; then
-  # If there are subdirs, report their specific --help.
-  for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
-    test -d "$ac_dir" ||
-      { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
-      continue
-    ac_builddir=.
-
-case "$ac_dir" in
-.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
-*)
-  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
-  # A ".." for each directory in $ac_dir_suffix.
-  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
-  case $ac_top_builddir_sub in
-  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
-  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
-  esac ;;
-esac
-ac_abs_top_builddir=$ac_pwd
-ac_abs_builddir=$ac_pwd$ac_dir_suffix
-# for backward compatibility:
-ac_top_builddir=$ac_top_build_prefix
-
-case $srcdir in
-  .)  # We are building in place.
-    ac_srcdir=.
-    ac_top_srcdir=$ac_top_builddir_sub
-    ac_abs_top_srcdir=$ac_pwd ;;
-  [\\/]* | ?:[\\/]* )  # Absolute name.
-    ac_srcdir=$srcdir$ac_dir_suffix;
-    ac_top_srcdir=$srcdir
-    ac_abs_top_srcdir=$srcdir ;;
-  *) # Relative name.
-    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
-    ac_top_srcdir=$ac_top_build_prefix$srcdir
-    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
-esac
-ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
-
-    cd "$ac_dir" || { ac_status=$?; continue; }
-    # Check for guested configure.
-    if test -f "$ac_srcdir/configure.gnu"; then
-      echo &&
-      $SHELL "$ac_srcdir/configure.gnu" --help=recursive
-    elif test -f "$ac_srcdir/configure"; then
-      echo &&
-      $SHELL "$ac_srcdir/configure" --help=recursive
-    else
-      $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
-    fi || ac_status=$?
-    cd "$ac_pwd" || { ac_status=$?; break; }
-  done
-fi
-
-test -n "$ac_init_help" && exit $ac_status
-if $ac_init_version; then
-  cat <<\_ACEOF
-configure
-generated by GNU Autoconf 2.69
-
-Copyright (C) 2012 Free Software Foundation, Inc.
-This configure script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it.
-_ACEOF
-  exit
-fi
-
-## ------------------------ ##
-## Autoconf initialization. ##
-## ------------------------ ##
-
-# ac_fn_c_try_compile LINENO
-# --------------------------
-# Try to compile conftest.$ac_ext, and return whether this succeeded.
-ac_fn_c_try_compile ()
-{
-  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-  rm -f conftest.$ac_objext
-  if { { ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_compile") 2>conftest.err
-  ac_status=$?
-  if test -s conftest.err; then
-    grep -v '^ *+' conftest.err >conftest.er1
-    cat conftest.er1 >&5
-    mv -f conftest.er1 conftest.err
-  fi
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then :
-  ac_retval=0
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_retval=1
-fi
-  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
-  as_fn_set_status $ac_retval
-
-} # ac_fn_c_try_compile
-
-# ac_fn_c_try_link LINENO
-# -----------------------
-# Try to link conftest.$ac_ext, and return whether this succeeded.
-ac_fn_c_try_link ()
-{
-  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-  rm -f conftest.$ac_objext conftest$ac_exeext
-  if { { ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_link") 2>conftest.err
-  ac_status=$?
-  if test -s conftest.err; then
-    grep -v '^ *+' conftest.err >conftest.er1
-    cat conftest.er1 >&5
-    mv -f conftest.er1 conftest.err
-  fi
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 test -x conftest$ac_exeext
-       }; then :
-  ac_retval=0
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_retval=1
-fi
-  # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
-  # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
-  # interfere with the next link command; also delete a directory that is
-  # left behind by Apple's compiler.  We do this before executing the actions.
-  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
-  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
-  as_fn_set_status $ac_retval
-
-} # ac_fn_c_try_link
-
-# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES
-# -------------------------------------------------------
-# Tests whether HEADER exists and can be compiled using the include files in
-# INCLUDES, setting the cache variable VAR accordingly.
-ac_fn_c_check_header_compile ()
-{
-  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
-$as_echo_n "checking for $2... " >&6; }
-if eval \${$3+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-$4
-#include <$2>
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  eval "$3=yes"
-else
-  eval "$3=no"
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-eval ac_res=\$$3
-	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
-
-} # ac_fn_c_check_header_compile
-
-# ac_fn_c_try_cpp LINENO
-# ----------------------
-# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
-ac_fn_c_try_cpp ()
-{
-  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-  if { { ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
-  ac_status=$?
-  if test -s conftest.err; then
-    grep -v '^ *+' conftest.err >conftest.er1
-    cat conftest.er1 >&5
-    mv -f conftest.er1 conftest.err
-  fi
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; } > conftest.i && {
-	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       }; then :
-  ac_retval=0
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-    ac_retval=1
-fi
-  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
-  as_fn_set_status $ac_retval
-
-} # ac_fn_c_try_cpp
-
-# ac_fn_c_try_run LINENO
-# ----------------------
-# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes
-# that executables *can* be run.
-ac_fn_c_try_run ()
-{
-  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-  if { { ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_link") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; } && { ac_try='./conftest$ac_exeext'
-  { { case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }; }; then :
-  ac_retval=0
-else
-  $as_echo "$as_me: program exited with status $ac_status" >&5
-       $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-       ac_retval=$ac_status
-fi
-  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
-  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
-  as_fn_set_status $ac_retval
-
-} # ac_fn_c_try_run
-
-# ac_fn_c_check_func LINENO FUNC VAR
-# ----------------------------------
-# Tests whether FUNC exists, setting the cache variable VAR accordingly
-ac_fn_c_check_func ()
-{
-  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
-$as_echo_n "checking for $2... " >&6; }
-if eval \${$3+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-/* Define $2 to an innocuous variant, in case <limits.h> declares $2.
-   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
-#define $2 innocuous_$2
-
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char $2 (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef $2
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char $2 ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined __stub_$2 || defined __stub___$2
-choke me
-#endif
-
-int
-main ()
-{
-return $2 ();
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-  eval "$3=yes"
-else
-  eval "$3=no"
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-fi
-eval ac_res=\$$3
-	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
-
-} # ac_fn_c_check_func
-
-# ac_fn_c_check_type LINENO TYPE VAR INCLUDES
-# -------------------------------------------
-# Tests whether TYPE exists after having included INCLUDES, setting cache
-# variable VAR accordingly.
-ac_fn_c_check_type ()
-{
-  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
-$as_echo_n "checking for $2... " >&6; }
-if eval \${$3+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  eval "$3=no"
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-$4
-int
-main ()
-{
-if (sizeof ($2))
-	 return 0;
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-$4
-int
-main ()
-{
-if (sizeof (($2)))
-	    return 0;
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-
-else
-  eval "$3=yes"
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-eval ac_res=\$$3
-	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
-
-} # ac_fn_c_check_type
-
-# ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES
-# -------------------------------------------------------
-# Tests whether HEADER exists, giving a warning if it cannot be compiled using
-# the include files in INCLUDES and setting the cache variable VAR
-# accordingly.
-ac_fn_c_check_header_mongrel ()
-{
-  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-  if eval \${$3+:} false; then :
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
-$as_echo_n "checking for $2... " >&6; }
-if eval \${$3+:} false; then :
-  $as_echo_n "(cached) " >&6
-fi
-eval ac_res=\$$3
-	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-else
-  # Is the header compilable?
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5
-$as_echo_n "checking $2 usability... " >&6; }
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-$4
-#include <$2>
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  ac_header_compiler=yes
-else
-  ac_header_compiler=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5
-$as_echo "$ac_header_compiler" >&6; }
-
-# Is the header present?
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5
-$as_echo_n "checking $2 presence... " >&6; }
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include <$2>
-_ACEOF
-if ac_fn_c_try_cpp "$LINENO"; then :
-  ac_header_preproc=yes
-else
-  ac_header_preproc=no
-fi
-rm -f conftest.err conftest.i conftest.$ac_ext
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5
-$as_echo "$ac_header_preproc" >&6; }
-
-# So?  What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #((
-  yes:no: )
-    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5
-$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;}
-    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
-$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
-    ;;
-  no:yes:* )
-    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5
-$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;}
-    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2:     check for missing prerequisite headers?" >&5
-$as_echo "$as_me: WARNING: $2:     check for missing prerequisite headers?" >&2;}
-    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5
-$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;}
-    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2:     section \"Present But Cannot Be Compiled\"" >&5
-$as_echo "$as_me: WARNING: $2:     section \"Present But Cannot Be Compiled\"" >&2;}
-    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
-$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
-    ;;
-esac
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
-$as_echo_n "checking for $2... " >&6; }
-if eval \${$3+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  eval "$3=\$ac_header_compiler"
-fi
-eval ac_res=\$$3
-	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-fi
-  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
-
-} # ac_fn_c_check_header_mongrel
-
-# ac_fn_c_compute_int LINENO EXPR VAR INCLUDES
-# --------------------------------------------
-# Tries to find the compile-time value of EXPR in a program that includes
-# INCLUDES, setting VAR accordingly. Returns whether the value could be
-# computed
-ac_fn_c_compute_int ()
-{
-  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-  if test "$cross_compiling" = yes; then
-    # Depending upon the size, compute the lo and hi bounds.
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-$4
-int
-main ()
-{
-static int test_array [1 - 2 * !(($2) >= 0)];
-test_array [0] = 0;
-return test_array [0];
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  ac_lo=0 ac_mid=0
-  while :; do
-    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-$4
-int
-main ()
-{
-static int test_array [1 - 2 * !(($2) <= $ac_mid)];
-test_array [0] = 0;
-return test_array [0];
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  ac_hi=$ac_mid; break
-else
-  as_fn_arith $ac_mid + 1 && ac_lo=$as_val
-			if test $ac_lo -le $ac_mid; then
-			  ac_lo= ac_hi=
-			  break
-			fi
-			as_fn_arith 2 '*' $ac_mid + 1 && ac_mid=$as_val
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-  done
-else
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-$4
-int
-main ()
-{
-static int test_array [1 - 2 * !(($2) < 0)];
-test_array [0] = 0;
-return test_array [0];
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  ac_hi=-1 ac_mid=-1
-  while :; do
-    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-$4
-int
-main ()
-{
-static int test_array [1 - 2 * !(($2) >= $ac_mid)];
-test_array [0] = 0;
-return test_array [0];
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  ac_lo=$ac_mid; break
-else
-  as_fn_arith '(' $ac_mid ')' - 1 && ac_hi=$as_val
-			if test $ac_mid -le $ac_hi; then
-			  ac_lo= ac_hi=
-			  break
-			fi
-			as_fn_arith 2 '*' $ac_mid && ac_mid=$as_val
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-  done
-else
-  ac_lo= ac_hi=
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-# Binary search between lo and hi bounds.
-while test "x$ac_lo" != "x$ac_hi"; do
-  as_fn_arith '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo && ac_mid=$as_val
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-$4
-int
-main ()
-{
-static int test_array [1 - 2 * !(($2) <= $ac_mid)];
-test_array [0] = 0;
-return test_array [0];
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  ac_hi=$ac_mid
-else
-  as_fn_arith '(' $ac_mid ')' + 1 && ac_lo=$as_val
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-done
-case $ac_lo in #((
-?*) eval "$3=\$ac_lo"; ac_retval=0 ;;
-'') ac_retval=1 ;;
-esac
-  else
-    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-$4
-static long int longval () { return $2; }
-static unsigned long int ulongval () { return $2; }
-#include <stdio.h>
-#include <stdlib.h>
-int
-main ()
-{
-
-  FILE *f = fopen ("conftest.val", "w");
-  if (! f)
-    return 1;
-  if (($2) < 0)
-    {
-      long int i = longval ();
-      if (i != ($2))
-	return 1;
-      fprintf (f, "%ld", i);
-    }
-  else
-    {
-      unsigned long int i = ulongval ();
-      if (i != ($2))
-	return 1;
-      fprintf (f, "%lu", i);
-    }
-  /* Do not output a trailing newline, as this causes \r\n confusion
-     on some platforms.  */
-  return ferror (f) || fclose (f) != 0;
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_run "$LINENO"; then :
-  echo >>conftest.val; read $3 <conftest.val; ac_retval=0
-else
-  ac_retval=1
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
-  conftest.$ac_objext conftest.beam conftest.$ac_ext
-rm -f conftest.val
-
-  fi
-  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
-  as_fn_set_status $ac_retval
-
-} # ac_fn_c_compute_int
-cat >config.log <<_ACEOF
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-
-It was created by $as_me, which was
-generated by GNU Autoconf 2.69.  Invocation command line was
-
-  $ $0 $@
-
-_ACEOF
-exec 5>>config.log
-{
-cat <<_ASUNAME
-## --------- ##
-## Platform. ##
-## --------- ##
-
-hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
-uname -m = `(uname -m) 2>/dev/null || echo unknown`
-uname -r = `(uname -r) 2>/dev/null || echo unknown`
-uname -s = `(uname -s) 2>/dev/null || echo unknown`
-uname -v = `(uname -v) 2>/dev/null || echo unknown`
-
-/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
-/bin/uname -X     = `(/bin/uname -X) 2>/dev/null     || echo unknown`
-
-/bin/arch              = `(/bin/arch) 2>/dev/null              || echo unknown`
-/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null       || echo unknown`
-/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
-/usr/bin/hostinfo      = `(/usr/bin/hostinfo) 2>/dev/null      || echo unknown`
-/bin/machine           = `(/bin/machine) 2>/dev/null           || echo unknown`
-/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null       || echo unknown`
-/bin/universe          = `(/bin/universe) 2>/dev/null          || echo unknown`
-
-_ASUNAME
-
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    $as_echo "PATH: $as_dir"
-  done
-IFS=$as_save_IFS
-
-} >&5
-
-cat >&5 <<_ACEOF
-
-
-## ----------- ##
-## Core tests. ##
-## ----------- ##
-
-_ACEOF
-
-
-# Keep a trace of the command line.
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Strip out --silent because we don't want to record it for future runs.
-# Also quote any args containing shell meta-characters.
-# Make two passes to allow for proper duplicate-argument suppression.
-ac_configure_args=
-ac_configure_args0=
-ac_configure_args1=
-ac_must_keep_next=false
-for ac_pass in 1 2
-do
-  for ac_arg
-  do
-    case $ac_arg in
-    -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
-    -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-    | -silent | --silent | --silen | --sile | --sil)
-      continue ;;
-    *\'*)
-      ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
-    esac
-    case $ac_pass in
-    1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
-    2)
-      as_fn_append ac_configure_args1 " '$ac_arg'"
-      if test $ac_must_keep_next = true; then
-	ac_must_keep_next=false # Got value, back to normal.
-      else
-	case $ac_arg in
-	  *=* | --config-cache | -C | -disable-* | --disable-* \
-	  | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
-	  | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
-	  | -with-* | --with-* | -without-* | --without-* | --x)
-	    case "$ac_configure_args0 " in
-	      "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
-	    esac
-	    ;;
-	  -* ) ac_must_keep_next=true ;;
-	esac
-      fi
-      as_fn_append ac_configure_args " '$ac_arg'"
-      ;;
-    esac
-  done
-done
-{ ac_configure_args0=; unset ac_configure_args0;}
-{ ac_configure_args1=; unset ac_configure_args1;}
-
-# When interrupted or exit'd, cleanup temporary files, and complete
-# config.log.  We remove comments because anyway the quotes in there
-# would cause problems or look ugly.
-# WARNING: Use '\'' to represent an apostrophe within the trap.
-# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
-trap 'exit_status=$?
-  # Save into config.log some information that might help in debugging.
-  {
-    echo
-
-    $as_echo "## ---------------- ##
-## Cache variables. ##
-## ---------------- ##"
-    echo
-    # The following way of writing the cache mishandles newlines in values,
-(
-  for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
-    eval ac_val=\$$ac_var
-    case $ac_val in #(
-    *${as_nl}*)
-      case $ac_var in #(
-      *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
-$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
-      esac
-      case $ac_var in #(
-      _ | IFS | as_nl) ;; #(
-      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
-      *) { eval $ac_var=; unset $ac_var;} ;;
-      esac ;;
-    esac
-  done
-  (set) 2>&1 |
-    case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
-    *${as_nl}ac_space=\ *)
-      sed -n \
-	"s/'\''/'\''\\\\'\'''\''/g;
-	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
-      ;; #(
-    *)
-      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
-      ;;
-    esac |
-    sort
-)
-    echo
-
-    $as_echo "## ----------------- ##
-## Output variables. ##
-## ----------------- ##"
-    echo
-    for ac_var in $ac_subst_vars
-    do
-      eval ac_val=\$$ac_var
-      case $ac_val in
-      *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
-      esac
-      $as_echo "$ac_var='\''$ac_val'\''"
-    done | sort
-    echo
-
-    if test -n "$ac_subst_files"; then
-      $as_echo "## ------------------- ##
-## File substitutions. ##
-## ------------------- ##"
-      echo
-      for ac_var in $ac_subst_files
-      do
-	eval ac_val=\$$ac_var
-	case $ac_val in
-	*\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
-	esac
-	$as_echo "$ac_var='\''$ac_val'\''"
-      done | sort
-      echo
-    fi
-
-    if test -s confdefs.h; then
-      $as_echo "## ----------- ##
-## confdefs.h. ##
-## ----------- ##"
-      echo
-      cat confdefs.h
-      echo
-    fi
-    test "$ac_signal" != 0 &&
-      $as_echo "$as_me: caught signal $ac_signal"
-    $as_echo "$as_me: exit $exit_status"
-  } >&5
-  rm -f core *.core core.conftest.* &&
-    rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
-    exit $exit_status
-' 0
-for ac_signal in 1 2 13 15; do
-  trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
-done
-ac_signal=0
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -f -r conftest* confdefs.h
-
-$as_echo "/* confdefs.h */" > confdefs.h
-
-# Predefined preprocessor variables.
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_NAME "$PACKAGE_NAME"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_VERSION "$PACKAGE_VERSION"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_STRING "$PACKAGE_STRING"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_URL "$PACKAGE_URL"
-_ACEOF
-
-
-# Let the site file select an alternate cache file if it wants to.
-# Prefer an explicitly selected file to automatically selected ones.
-ac_site_file1=NONE
-ac_site_file2=NONE
-if test -n "$CONFIG_SITE"; then
-  # We do not want a PATH search for config.site.
-  case $CONFIG_SITE in #((
-    -*)  ac_site_file1=./$CONFIG_SITE;;
-    */*) ac_site_file1=$CONFIG_SITE;;
-    *)   ac_site_file1=./$CONFIG_SITE;;
-  esac
-elif test "x$prefix" != xNONE; then
-  ac_site_file1=$prefix/share/config.site
-  ac_site_file2=$prefix/etc/config.site
-else
-  ac_site_file1=$ac_default_prefix/share/config.site
-  ac_site_file2=$ac_default_prefix/etc/config.site
-fi
-for ac_site_file in "$ac_site_file1" "$ac_site_file2"
-do
-  test "x$ac_site_file" = xNONE && continue
-  if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then
-    { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
-$as_echo "$as_me: loading site script $ac_site_file" >&6;}
-    sed 's/^/| /' "$ac_site_file" >&5
-    . "$ac_site_file" \
-      || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "failed to load site script $ac_site_file
-See \`config.log' for more details" "$LINENO" 5; }
-  fi
-done
-
-if test -r "$cache_file"; then
-  # Some versions of bash will fail to source /dev/null (special files
-  # actually), so we avoid doing that.  DJGPP emulates it as a regular file.
-  if test /dev/null != "$cache_file" && test -f "$cache_file"; then
-    { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
-$as_echo "$as_me: loading cache $cache_file" >&6;}
-    case $cache_file in
-      [\\/]* | ?:[\\/]* ) . "$cache_file";;
-      *)                      . "./$cache_file";;
-    esac
-  fi
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
-$as_echo "$as_me: creating cache $cache_file" >&6;}
-  >$cache_file
-fi
-
-# Check that the precious variables saved in the cache have kept the same
-# value.
-ac_cache_corrupted=false
-for ac_var in $ac_precious_vars; do
-  eval ac_old_set=\$ac_cv_env_${ac_var}_set
-  eval ac_new_set=\$ac_env_${ac_var}_set
-  eval ac_old_val=\$ac_cv_env_${ac_var}_value
-  eval ac_new_val=\$ac_env_${ac_var}_value
-  case $ac_old_set,$ac_new_set in
-    set,)
-      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
-$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
-      ac_cache_corrupted=: ;;
-    ,set)
-      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5
-$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
-      ac_cache_corrupted=: ;;
-    ,);;
-    *)
-      if test "x$ac_old_val" != "x$ac_new_val"; then
-	# differences in whitespace do not lead to failure.
-	ac_old_val_w=`echo x $ac_old_val`
-	ac_new_val_w=`echo x $ac_new_val`
-	if test "$ac_old_val_w" != "$ac_new_val_w"; then
-	  { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5
-$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
-	  ac_cache_corrupted=:
-	else
-	  { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
-$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
-	  eval $ac_var=\$ac_old_val
-	fi
-	{ $as_echo "$as_me:${as_lineno-$LINENO}:   former value:  \`$ac_old_val'" >&5
-$as_echo "$as_me:   former value:  \`$ac_old_val'" >&2;}
-	{ $as_echo "$as_me:${as_lineno-$LINENO}:   current value: \`$ac_new_val'" >&5
-$as_echo "$as_me:   current value: \`$ac_new_val'" >&2;}
-      fi;;
-  esac
-  # Pass precious variables to config.status.
-  if test "$ac_new_set" = set; then
-    case $ac_new_val in
-    *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
-    *) ac_arg=$ac_var=$ac_new_val ;;
-    esac
-    case " $ac_configure_args " in
-      *" '$ac_arg' "*) ;; # Avoid dups.  Use of quotes ensures accuracy.
-      *) as_fn_append ac_configure_args " '$ac_arg'" ;;
-    esac
-  fi
-done
-if $ac_cache_corrupted; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-  { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
-$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
-  as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
-fi
-## -------------------- ##
-## Main body of script. ##
-## -------------------- ##
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-
-
-ac_config_headers="$ac_config_headers config.h"
-
-
-
-ac_aux_dir=
-for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
-  if test -f "$ac_dir/install-sh"; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f "$ac_dir/install.sh"; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  elif test -f "$ac_dir/shtool"; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/shtool install -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5
-fi
-
-# These three variables are undocumented and unsupported,
-# and are intended to be withdrawn in a future Autoconf release.
-# They can cause serious problems if a builder's source tree is in a directory
-# whose full name contains unusual characters.
-ac_config_guess="$SHELL $ac_aux_dir/config.guess"  # Please don't use this var.
-ac_config_sub="$SHELL $ac_aux_dir/config.sub"  # Please don't use this var.
-ac_configure="$SHELL $ac_aux_dir/configure"  # Please don't use this var.
-
-
-# Make sure we can run config.sub.
-$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
-  as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
-$as_echo_n "checking build system type... " >&6; }
-if ${ac_cv_build+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_build_alias=$build_alias
-test "x$ac_build_alias" = x &&
-  ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
-test "x$ac_build_alias" = x &&
-  as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5
-ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
-  as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
-$as_echo "$ac_cv_build" >&6; }
-case $ac_cv_build in
-*-*-*) ;;
-*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;;
-esac
-build=$ac_cv_build
-ac_save_IFS=$IFS; IFS='-'
-set x $ac_cv_build
-shift
-build_cpu=$1
-build_vendor=$2
-shift; shift
-# Remember, the first character of IFS is used to create $*,
-# except with old shells:
-build_os=$*
-IFS=$ac_save_IFS
-case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5
-$as_echo_n "checking host system type... " >&6; }
-if ${ac_cv_host+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test "x$host_alias" = x; then
-  ac_cv_host=$ac_cv_build
-else
-  ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
-    as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
-fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5
-$as_echo "$ac_cv_host" >&6; }
-case $ac_cv_host in
-*-*-*) ;;
-*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;;
-esac
-host=$ac_cv_host
-ac_save_IFS=$IFS; IFS='-'
-set x $ac_cv_host
-shift
-host_cpu=$1
-host_vendor=$2
-shift; shift
-# Remember, the first character of IFS is used to create $*,
-# except with old shells:
-host_os=$*
-IFS=$ac_save_IFS
-case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
-
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5
-$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
-set x ${MAKE-make}
-ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
-if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  cat >conftest.make <<\_ACEOF
-SHELL = /bin/sh
-all:
-	@echo '@@@%%%=$(MAKE)=@@@%%%'
-_ACEOF
-# GNU make sometimes prints "make[1]: Entering ...", which would confuse us.
-case `${MAKE-make} -f conftest.make 2>/dev/null` in
-  *@@@%%%=?*=@@@%%%*)
-    eval ac_cv_prog_make_${ac_make}_set=yes;;
-  *)
-    eval ac_cv_prog_make_${ac_make}_set=no;;
-esac
-rm -f conftest.make
-fi
-if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-  SET_MAKE=
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-  SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-
-#
-# GNU libtool support
-#
-case $build_os in
-sunos*)
-    # Just set the maximum command line length for sunos as it otherwise
-    # takes a exceptionally long time to work it out. Required for libtool.
-
-    lt_cv_sys_max_cmd_len=4096;
-    ;;
-esac
-
-case `pwd` in
-  *\ * | *\	*)
-    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5
-$as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;;
-esac
-
-
-
-macro_version='2.4.2'
-macro_revision='1.3337'
-
-
-
-
-
-
-
-
-
-
-
-
-
-ltmain="$ac_aux_dir/ltmain.sh"
-
-# Backslashify metacharacters that are still active within
-# double-quoted strings.
-sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
-
-# Same as above, but do not quote variable references.
-double_quote_subst='s/\(["`\\]\)/\\\1/g'
-
-# Sed substitution to delay expansion of an escaped shell variable in a
-# double_quote_subst'ed string.
-delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
-
-# Sed substitution to delay expansion of an escaped single quote.
-delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
-
-# Sed substitution to avoid accidental globbing in evaled expressions
-no_glob_subst='s/\*/\\\*/g'
-
-ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
-ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
-ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5
-$as_echo_n "checking how to print strings... " >&6; }
-# Test print first, because it will be a builtin if present.
-if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \
-   test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
-  ECHO='print -r --'
-elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
-  ECHO='printf %s\n'
-else
-  # Use this function as a fallback that always works.
-  func_fallback_echo ()
-  {
-    eval 'cat <<_LTECHO_EOF
-$1
-_LTECHO_EOF'
-  }
-  ECHO='func_fallback_echo'
-fi
-
-# func_echo_all arg...
-# Invoke $ECHO with all args, space-separated.
-func_echo_all ()
-{
-    $ECHO ""
-}
-
-case "$ECHO" in
-  printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5
-$as_echo "printf" >&6; } ;;
-  print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5
-$as_echo "print -r" >&6; } ;;
-  *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: cat" >&5
-$as_echo "cat" >&6; } ;;
-esac
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
-set dummy ${ac_tool_prefix}gcc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_CC+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_CC="${ac_tool_prefix}gcc"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_CC"; then
-  ac_ct_CC=$CC
-  # Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_CC+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_CC"; then
-  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_CC="gcc"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
-$as_echo "$ac_ct_CC" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-  if test "x$ac_ct_CC" = x; then
-    CC=""
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    CC=$ac_ct_CC
-  fi
-else
-  CC="$ac_cv_prog_CC"
-fi
-
-if test -z "$CC"; then
-          if test -n "$ac_tool_prefix"; then
-    # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
-set dummy ${ac_tool_prefix}cc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_CC+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_CC="${ac_tool_prefix}cc"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-  fi
-fi
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_CC+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  ac_prog_rejected=no
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
-       ac_prog_rejected=yes
-       continue
-     fi
-    ac_cv_prog_CC="cc"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# != 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
-  fi
-fi
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$CC"; then
-  if test -n "$ac_tool_prefix"; then
-  for ac_prog in cl.exe
-  do
-    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_CC+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-    test -n "$CC" && break
-  done
-fi
-if test -z "$CC"; then
-  ac_ct_CC=$CC
-  for ac_prog in cl.exe
-do
-  # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_CC+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_CC"; then
-  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_CC="$ac_prog"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
-$as_echo "$ac_ct_CC" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-  test -n "$ac_ct_CC" && break
-done
-
-  if test "x$ac_ct_CC" = x; then
-    CC=""
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    CC=$ac_ct_CC
-  fi
-fi
-
-fi
-
-
-test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "no acceptable C compiler found in \$PATH
-See \`config.log' for more details" "$LINENO" 5; }
-
-# Provide some information about the compiler.
-$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
-set X $ac_compile
-ac_compiler=$2
-for ac_option in --version -v -V -qversion; do
-  { { ac_try="$ac_compiler $ac_option >&5"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_compiler $ac_option >&5") 2>conftest.err
-  ac_status=$?
-  if test -s conftest.err; then
-    sed '10a\
-... rest of stderr output deleted ...
-         10q' conftest.err >conftest.er1
-    cat conftest.er1 >&5
-  fi
-  rm -f conftest.er1 conftest.err
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }
-done
-
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out"
-# Try to create an executable without -o first, disregard a.out.
-# It will help us diagnose broken compilers, and finding out an intuition
-# of exeext.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5
-$as_echo_n "checking whether the C compiler works... " >&6; }
-ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
-
-# The possible output files:
-ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*"
-
-ac_rmfiles=
-for ac_file in $ac_files
-do
-  case $ac_file in
-    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
-    * ) ac_rmfiles="$ac_rmfiles $ac_file";;
-  esac
-done
-rm -f $ac_rmfiles
-
-if { { ac_try="$ac_link_default"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_link_default") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }; then :
-  # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
-# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
-# in a Makefile.  We should not override ac_cv_exeext if it was cached,
-# so that the user can short-circuit this test for compilers unknown to
-# Autoconf.
-for ac_file in $ac_files ''
-do
-  test -f "$ac_file" || continue
-  case $ac_file in
-    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj )
-	;;
-    [ab].out )
-	# We found the default executable, but exeext='' is most
-	# certainly right.
-	break;;
-    *.* )
-	if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
-	then :; else
-	   ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
-	fi
-	# We set ac_cv_exeext here because the later test for it is not
-	# safe: cross compilers may not add the suffix if given an `-o'
-	# argument, so we may need to know it at that point already.
-	# Even if this section looks crufty: it has the advantage of
-	# actually working.
-	break;;
-    * )
-	break;;
-  esac
-done
-test "$ac_cv_exeext" = no && ac_cv_exeext=
-
-else
-  ac_file=''
-fi
-if test -z "$ac_file"; then :
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-$as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error 77 "C compiler cannot create executables
-See \`config.log' for more details" "$LINENO" 5; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5
-$as_echo_n "checking for C compiler default output file name... " >&6; }
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5
-$as_echo "$ac_file" >&6; }
-ac_exeext=$ac_cv_exeext
-
-rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out
-ac_clean_files=$ac_clean_files_save
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5
-$as_echo_n "checking for suffix of executables... " >&6; }
-if { { ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_link") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }; then :
-  # If both `conftest.exe' and `conftest' are `present' (well, observable)
-# catch `conftest.exe'.  For instance with Cygwin, `ls conftest' will
-# work properly (i.e., refer to `conftest.exe'), while it won't with
-# `rm'.
-for ac_file in conftest.exe conftest conftest.*; do
-  test -f "$ac_file" || continue
-  case $ac_file in
-    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
-    *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
-	  break;;
-    * ) break;;
-  esac
-done
-else
-  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "cannot compute suffix of executables: cannot compile and link
-See \`config.log' for more details" "$LINENO" 5; }
-fi
-rm -f conftest conftest$ac_cv_exeext
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
-$as_echo "$ac_cv_exeext" >&6; }
-
-rm -f conftest.$ac_ext
-EXEEXT=$ac_cv_exeext
-ac_exeext=$EXEEXT
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include <stdio.h>
-int
-main ()
-{
-FILE *f = fopen ("conftest.out", "w");
- return ferror (f) || fclose (f) != 0;
-
-  ;
-  return 0;
-}
-_ACEOF
-ac_clean_files="$ac_clean_files conftest.out"
-# Check that the compiler produces executables we can run.  If not, either
-# the compiler is broken, or we cross compile.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
-$as_echo_n "checking whether we are cross compiling... " >&6; }
-if test "$cross_compiling" != yes; then
-  { { ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_link") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }
-  if { ac_try='./conftest$ac_cv_exeext'
-  { { case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }; }; then
-    cross_compiling=no
-  else
-    if test "$cross_compiling" = maybe; then
-	cross_compiling=yes
-    else
-	{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "cannot run C compiled programs.
-If you meant to cross compile, use \`--host'.
-See \`config.log' for more details" "$LINENO" 5; }
-    fi
-  fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
-$as_echo "$cross_compiling" >&6; }
-
-rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out
-ac_clean_files=$ac_clean_files_save
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
-$as_echo_n "checking for suffix of object files... " >&6; }
-if ${ac_cv_objext+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.o conftest.obj
-if { { ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_compile") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }; then :
-  for ac_file in conftest.o conftest.obj conftest.*; do
-  test -f "$ac_file" || continue;
-  case $ac_file in
-    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
-    *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
-       break;;
-  esac
-done
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "cannot compute suffix of object files: cannot compile
-See \`config.log' for more details" "$LINENO" 5; }
-fi
-rm -f conftest.$ac_cv_objext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5
-$as_echo "$ac_cv_objext" >&6; }
-OBJEXT=$ac_cv_objext
-ac_objext=$OBJEXT
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
-$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
-if ${ac_cv_c_compiler_gnu+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-#ifndef __GNUC__
-       choke me
-#endif
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  ac_compiler_gnu=yes
-else
-  ac_compiler_gnu=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-ac_cv_c_compiler_gnu=$ac_compiler_gnu
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
-$as_echo "$ac_cv_c_compiler_gnu" >&6; }
-if test $ac_compiler_gnu = yes; then
-  GCC=yes
-else
-  GCC=
-fi
-ac_test_CFLAGS=${CFLAGS+set}
-ac_save_CFLAGS=$CFLAGS
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
-$as_echo_n "checking whether $CC accepts -g... " >&6; }
-if ${ac_cv_prog_cc_g+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_save_c_werror_flag=$ac_c_werror_flag
-   ac_c_werror_flag=yes
-   ac_cv_prog_cc_g=no
-   CFLAGS="-g"
-   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  ac_cv_prog_cc_g=yes
-else
-  CFLAGS=""
-      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-
-else
-  ac_c_werror_flag=$ac_save_c_werror_flag
-	 CFLAGS="-g"
-	 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  ac_cv_prog_cc_g=yes
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-   ac_c_werror_flag=$ac_save_c_werror_flag
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
-$as_echo "$ac_cv_prog_cc_g" >&6; }
-if test "$ac_test_CFLAGS" = set; then
-  CFLAGS=$ac_save_CFLAGS
-elif test $ac_cv_prog_cc_g = yes; then
-  if test "$GCC" = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-g"
-  fi
-else
-  if test "$GCC" = yes; then
-    CFLAGS="-O2"
-  else
-    CFLAGS=
-  fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
-$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
-if ${ac_cv_prog_cc_c89+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_cv_prog_cc_c89=no
-ac_save_CC=$CC
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include <stdarg.h>
-#include <stdio.h>
-struct stat;
-/* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */
-struct buf { int x; };
-FILE * (*rcsopen) (struct buf *, struct stat *, int);
-static char *e (p, i)
-     char **p;
-     int i;
-{
-  return p[i];
-}
-static char *f (char * (*g) (char **, int), char **p, ...)
-{
-  char *s;
-  va_list v;
-  va_start (v,p);
-  s = g (p, va_arg (v,int));
-  va_end (v);
-  return s;
-}
-
-/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default.  It has
-   function prototypes and stuff, but not '\xHH' hex character constants.
-   These don't provoke an error unfortunately, instead are silently treated
-   as 'x'.  The following induces an error, until -std is added to get
-   proper ANSI mode.  Curiously '\x00'!='x' always comes out true, for an
-   array size at least.  It's necessary to write '\x00'==0 to get something
-   that's true only with -std.  */
-int osf4_cc_array ['\x00' == 0 ? 1 : -1];
-
-/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
-   inside strings and character constants.  */
-#define FOO(x) 'x'
-int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
-
-int test (int i, double x);
-struct s1 {int (*f) (int a);};
-struct s2 {int (*f) (double a);};
-int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
-int argc;
-char **argv;
-int
-main ()
-{
-return f (e, argv, 0) != argv[0]  ||  f (e, argv, 1) != argv[1];
-  ;
-  return 0;
-}
-_ACEOF
-for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
-	-Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
-do
-  CC="$ac_save_CC $ac_arg"
-  if ac_fn_c_try_compile "$LINENO"; then :
-  ac_cv_prog_cc_c89=$ac_arg
-fi
-rm -f core conftest.err conftest.$ac_objext
-  test "x$ac_cv_prog_cc_c89" != "xno" && break
-done
-rm -f conftest.$ac_ext
-CC=$ac_save_CC
-
-fi
-# AC_CACHE_VAL
-case "x$ac_cv_prog_cc_c89" in
-  x)
-    { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
-$as_echo "none needed" >&6; } ;;
-  xno)
-    { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
-$as_echo "unsupported" >&6; } ;;
-  *)
-    CC="$CC $ac_cv_prog_cc_c89"
-    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
-$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
-esac
-if test "x$ac_cv_prog_cc_c89" != xno; then :
-
-fi
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5
-$as_echo_n "checking for a sed that does not truncate output... " >&6; }
-if ${ac_cv_path_SED+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-            ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
-     for ac_i in 1 2 3 4 5 6 7; do
-       ac_script="$ac_script$as_nl$ac_script"
-     done
-     echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed
-     { ac_script=; unset ac_script;}
-     if test -z "$SED"; then
-  ac_path_SED_found=false
-  # Loop through the user's path and test for each of PROGNAME-LIST
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_prog in sed gsed; do
-    for ac_exec_ext in '' $ac_executable_extensions; do
-      ac_path_SED="$as_dir/$ac_prog$ac_exec_ext"
-      as_fn_executable_p "$ac_path_SED" || continue
-# Check for GNU ac_path_SED and select it if it is found.
-  # Check for GNU $ac_path_SED
-case `"$ac_path_SED" --version 2>&1` in
-*GNU*)
-  ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;;
-*)
-  ac_count=0
-  $as_echo_n 0123456789 >"conftest.in"
-  while :
-  do
-    cat "conftest.in" "conftest.in" >"conftest.tmp"
-    mv "conftest.tmp" "conftest.in"
-    cp "conftest.in" "conftest.nl"
-    $as_echo '' >> "conftest.nl"
-    "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break
-    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
-    as_fn_arith $ac_count + 1 && ac_count=$as_val
-    if test $ac_count -gt ${ac_path_SED_max-0}; then
-      # Best one so far, save it but keep looking for a better one
-      ac_cv_path_SED="$ac_path_SED"
-      ac_path_SED_max=$ac_count
-    fi
-    # 10*(2^10) chars as input seems more than enough
-    test $ac_count -gt 10 && break
-  done
-  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
-esac
-
-      $ac_path_SED_found && break 3
-    done
-  done
-  done
-IFS=$as_save_IFS
-  if test -z "$ac_cv_path_SED"; then
-    as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5
-  fi
-else
-  ac_cv_path_SED=$SED
-fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5
-$as_echo "$ac_cv_path_SED" >&6; }
- SED="$ac_cv_path_SED"
-  rm -f conftest.sed
-
-test -z "$SED" && SED=sed
-Xsed="$SED -e 1s/^X//"
-
-
-
-
-
-
-
-
-
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5
-$as_echo_n "checking for grep that handles long lines and -e... " >&6; }
-if ${ac_cv_path_GREP+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -z "$GREP"; then
-  ac_path_GREP_found=false
-  # Loop through the user's path and test for each of PROGNAME-LIST
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_prog in grep ggrep; do
-    for ac_exec_ext in '' $ac_executable_extensions; do
-      ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
-      as_fn_executable_p "$ac_path_GREP" || continue
-# Check for GNU ac_path_GREP and select it if it is found.
-  # Check for GNU $ac_path_GREP
-case `"$ac_path_GREP" --version 2>&1` in
-*GNU*)
-  ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
-*)
-  ac_count=0
-  $as_echo_n 0123456789 >"conftest.in"
-  while :
-  do
-    cat "conftest.in" "conftest.in" >"conftest.tmp"
-    mv "conftest.tmp" "conftest.in"
-    cp "conftest.in" "conftest.nl"
-    $as_echo 'GREP' >> "conftest.nl"
-    "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
-    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
-    as_fn_arith $ac_count + 1 && ac_count=$as_val
-    if test $ac_count -gt ${ac_path_GREP_max-0}; then
-      # Best one so far, save it but keep looking for a better one
-      ac_cv_path_GREP="$ac_path_GREP"
-      ac_path_GREP_max=$ac_count
-    fi
-    # 10*(2^10) chars as input seems more than enough
-    test $ac_count -gt 10 && break
-  done
-  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
-esac
-
-      $ac_path_GREP_found && break 3
-    done
-  done
-  done
-IFS=$as_save_IFS
-  if test -z "$ac_cv_path_GREP"; then
-    as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
-  fi
-else
-  ac_cv_path_GREP=$GREP
-fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5
-$as_echo "$ac_cv_path_GREP" >&6; }
- GREP="$ac_cv_path_GREP"
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
-$as_echo_n "checking for egrep... " >&6; }
-if ${ac_cv_path_EGREP+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
-   then ac_cv_path_EGREP="$GREP -E"
-   else
-     if test -z "$EGREP"; then
-  ac_path_EGREP_found=false
-  # Loop through the user's path and test for each of PROGNAME-LIST
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_prog in egrep; do
-    for ac_exec_ext in '' $ac_executable_extensions; do
-      ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
-      as_fn_executable_p "$ac_path_EGREP" || continue
-# Check for GNU ac_path_EGREP and select it if it is found.
-  # Check for GNU $ac_path_EGREP
-case `"$ac_path_EGREP" --version 2>&1` in
-*GNU*)
-  ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
-*)
-  ac_count=0
-  $as_echo_n 0123456789 >"conftest.in"
-  while :
-  do
-    cat "conftest.in" "conftest.in" >"conftest.tmp"
-    mv "conftest.tmp" "conftest.in"
-    cp "conftest.in" "conftest.nl"
-    $as_echo 'EGREP' >> "conftest.nl"
-    "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
-    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
-    as_fn_arith $ac_count + 1 && ac_count=$as_val
-    if test $ac_count -gt ${ac_path_EGREP_max-0}; then
-      # Best one so far, save it but keep looking for a better one
-      ac_cv_path_EGREP="$ac_path_EGREP"
-      ac_path_EGREP_max=$ac_count
-    fi
-    # 10*(2^10) chars as input seems more than enough
-    test $ac_count -gt 10 && break
-  done
-  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
-esac
-
-      $ac_path_EGREP_found && break 3
-    done
-  done
-  done
-IFS=$as_save_IFS
-  if test -z "$ac_cv_path_EGREP"; then
-    as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
-  fi
-else
-  ac_cv_path_EGREP=$EGREP
-fi
-
-   fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5
-$as_echo "$ac_cv_path_EGREP" >&6; }
- EGREP="$ac_cv_path_EGREP"
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5
-$as_echo_n "checking for fgrep... " >&6; }
-if ${ac_cv_path_FGREP+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1
-   then ac_cv_path_FGREP="$GREP -F"
-   else
-     if test -z "$FGREP"; then
-  ac_path_FGREP_found=false
-  # Loop through the user's path and test for each of PROGNAME-LIST
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_prog in fgrep; do
-    for ac_exec_ext in '' $ac_executable_extensions; do
-      ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext"
-      as_fn_executable_p "$ac_path_FGREP" || continue
-# Check for GNU ac_path_FGREP and select it if it is found.
-  # Check for GNU $ac_path_FGREP
-case `"$ac_path_FGREP" --version 2>&1` in
-*GNU*)
-  ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;;
-*)
-  ac_count=0
-  $as_echo_n 0123456789 >"conftest.in"
-  while :
-  do
-    cat "conftest.in" "conftest.in" >"conftest.tmp"
-    mv "conftest.tmp" "conftest.in"
-    cp "conftest.in" "conftest.nl"
-    $as_echo 'FGREP' >> "conftest.nl"
-    "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break
-    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
-    as_fn_arith $ac_count + 1 && ac_count=$as_val
-    if test $ac_count -gt ${ac_path_FGREP_max-0}; then
-      # Best one so far, save it but keep looking for a better one
-      ac_cv_path_FGREP="$ac_path_FGREP"
-      ac_path_FGREP_max=$ac_count
-    fi
-    # 10*(2^10) chars as input seems more than enough
-    test $ac_count -gt 10 && break
-  done
-  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
-esac
-
-      $ac_path_FGREP_found && break 3
-    done
-  done
-  done
-IFS=$as_save_IFS
-  if test -z "$ac_cv_path_FGREP"; then
-    as_fn_error $? "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
-  fi
-else
-  ac_cv_path_FGREP=$FGREP
-fi
-
-   fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5
-$as_echo "$ac_cv_path_FGREP" >&6; }
- FGREP="$ac_cv_path_FGREP"
-
-
-test -z "$GREP" && GREP=grep
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-# Check whether --with-gnu-ld was given.
-if test "${with_gnu_ld+set}" = set; then :
-  withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
-else
-  with_gnu_ld=no
-fi
-
-ac_prog=ld
-if test "$GCC" = yes; then
-  # Check if gcc -print-prog-name=ld gives a path.
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5
-$as_echo_n "checking for ld used by $CC... " >&6; }
-  case $host in
-  *-*-mingw*)
-    # gcc leaves a trailing carriage return which upsets mingw
-    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-  *)
-    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-  esac
-  case $ac_prog in
-    # Accept absolute paths.
-    [\\/]* | ?:[\\/]*)
-      re_direlt='/[^/][^/]*/\.\./'
-      # Canonicalize the pathname of ld
-      ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
-      while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
-	ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
-      done
-      test -z "$LD" && LD="$ac_prog"
-      ;;
-  "")
-    # If it fails, then pretend we aren't using GCC.
-    ac_prog=ld
-    ;;
-  *)
-    # If it is relative, then search for the first ld in PATH.
-    with_gnu_ld=unknown
-    ;;
-  esac
-elif test "$with_gnu_ld" = yes; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
-$as_echo_n "checking for GNU ld... " >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
-$as_echo_n "checking for non-GNU ld... " >&6; }
-fi
-if ${lt_cv_path_LD+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -z "$LD"; then
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-  for ac_dir in $PATH; do
-    IFS="$lt_save_ifs"
-    test -z "$ac_dir" && ac_dir=.
-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-      lt_cv_path_LD="$ac_dir/$ac_prog"
-      # Check to see if the program is GNU ld.  I'd rather use --version,
-      # but apparently some variants of GNU ld only accept -v.
-      # Break only if it was the GNU/non-GNU ld that we prefer.
-      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
-      *GNU* | *'with BFD'*)
-	test "$with_gnu_ld" != no && break
-	;;
-      *)
-	test "$with_gnu_ld" != yes && break
-	;;
-      esac
-    fi
-  done
-  IFS="$lt_save_ifs"
-else
-  lt_cv_path_LD="$LD" # Let the user override the test with a path.
-fi
-fi
-
-LD="$lt_cv_path_LD"
-if test -n "$LD"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
-$as_echo "$LD" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
-$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
-if ${lt_cv_prog_gnu_ld+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  # I'd rather use --version here, but apparently some GNU lds only accept -v.
-case `$LD -v 2>&1 </dev/null` in
-*GNU* | *'with BFD'*)
-  lt_cv_prog_gnu_ld=yes
-  ;;
-*)
-  lt_cv_prog_gnu_ld=no
-  ;;
-esac
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_gnu_ld" >&5
-$as_echo "$lt_cv_prog_gnu_ld" >&6; }
-with_gnu_ld=$lt_cv_prog_gnu_ld
-
-
-
-
-
-
-
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5
-$as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; }
-if ${lt_cv_path_NM+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$NM"; then
-  # Let the user override the test.
-  lt_cv_path_NM="$NM"
-else
-  lt_nm_to_check="${ac_tool_prefix}nm"
-  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
-    lt_nm_to_check="$lt_nm_to_check nm"
-  fi
-  for lt_tmp_nm in $lt_nm_to_check; do
-    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-    for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
-      IFS="$lt_save_ifs"
-      test -z "$ac_dir" && ac_dir=.
-      tmp_nm="$ac_dir/$lt_tmp_nm"
-      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
-	# Check to see if the nm accepts a BSD-compat flag.
-	# Adding the `sed 1q' prevents false positives on HP-UX, which says:
-	#   nm: unknown option "B" ignored
-	# Tru64's nm complains that /dev/null is an invalid object file
-	case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
-	*/dev/null* | *'Invalid file or object type'*)
-	  lt_cv_path_NM="$tmp_nm -B"
-	  break
-	  ;;
-	*)
-	  case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
-	  */dev/null*)
-	    lt_cv_path_NM="$tmp_nm -p"
-	    break
-	    ;;
-	  *)
-	    lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-	    continue # so that we can try to find one that supports BSD flags
-	    ;;
-	  esac
-	  ;;
-	esac
-      fi
-    done
-    IFS="$lt_save_ifs"
-  done
-  : ${lt_cv_path_NM=no}
-fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5
-$as_echo "$lt_cv_path_NM" >&6; }
-if test "$lt_cv_path_NM" != "no"; then
-  NM="$lt_cv_path_NM"
-else
-  # Didn't find any BSD compatible name lister, look for dumpbin.
-  if test -n "$DUMPBIN"; then :
-    # Let the user override the test.
-  else
-    if test -n "$ac_tool_prefix"; then
-  for ac_prog in dumpbin "link -dump"
-  do
-    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_DUMPBIN+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$DUMPBIN"; then
-  ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-DUMPBIN=$ac_cv_prog_DUMPBIN
-if test -n "$DUMPBIN"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5
-$as_echo "$DUMPBIN" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-    test -n "$DUMPBIN" && break
-  done
-fi
-if test -z "$DUMPBIN"; then
-  ac_ct_DUMPBIN=$DUMPBIN
-  for ac_prog in dumpbin "link -dump"
-do
-  # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_DUMPBIN+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_DUMPBIN"; then
-  ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_DUMPBIN="$ac_prog"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN
-if test -n "$ac_ct_DUMPBIN"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5
-$as_echo "$ac_ct_DUMPBIN" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-  test -n "$ac_ct_DUMPBIN" && break
-done
-
-  if test "x$ac_ct_DUMPBIN" = x; then
-    DUMPBIN=":"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    DUMPBIN=$ac_ct_DUMPBIN
-  fi
-fi
-
-    case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in
-    *COFF*)
-      DUMPBIN="$DUMPBIN -symbols"
-      ;;
-    *)
-      DUMPBIN=:
-      ;;
-    esac
-  fi
-
-  if test "$DUMPBIN" != ":"; then
-    NM="$DUMPBIN"
-  fi
-fi
-test -z "$NM" && NM=nm
-
-
-
-
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5
-$as_echo_n "checking the name lister ($NM) interface... " >&6; }
-if ${lt_cv_nm_interface+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_nm_interface="BSD nm"
-  echo "int some_variable = 0;" > conftest.$ac_ext
-  (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&5)
-  (eval "$ac_compile" 2>conftest.err)
-  cat conftest.err >&5
-  (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
-  (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
-  cat conftest.err >&5
-  (eval echo "\"\$as_me:$LINENO: output\"" >&5)
-  cat conftest.out >&5
-  if $GREP 'External.*some_variable' conftest.out > /dev/null; then
-    lt_cv_nm_interface="MS dumpbin"
-  fi
-  rm -f conftest*
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5
-$as_echo "$lt_cv_nm_interface" >&6; }
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5
-$as_echo_n "checking whether ln -s works... " >&6; }
-LN_S=$as_ln_s
-if test "$LN_S" = "ln -s"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5
-$as_echo "no, using $LN_S" >&6; }
-fi
-
-# find the maximum length of command line arguments
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5
-$as_echo_n "checking the maximum length of command line arguments... " >&6; }
-if ${lt_cv_sys_max_cmd_len+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-    i=0
-  teststring="ABCD"
-
-  case $build_os in
-  msdosdjgpp*)
-    # On DJGPP, this test can blow up pretty badly due to problems in libc
-    # (any single argument exceeding 2000 bytes causes a buffer overrun
-    # during glob expansion).  Even if it were fixed, the result of this
-    # check would be larger than it should be.
-    lt_cv_sys_max_cmd_len=12288;    # 12K is about right
-    ;;
-
-  gnu*)
-    # Under GNU Hurd, this test is not required because there is
-    # no limit to the length of command line arguments.
-    # Libtool will interpret -1 as no limit whatsoever
-    lt_cv_sys_max_cmd_len=-1;
-    ;;
-
-  cygwin* | mingw* | cegcc*)
-    # On Win9x/ME, this test blows up -- it succeeds, but takes
-    # about 5 minutes as the teststring grows exponentially.
-    # Worse, since 9x/ME are not pre-emptively multitasking,
-    # you end up with a "frozen" computer, even though with patience
-    # the test eventually succeeds (with a max line length of 256k).
-    # Instead, let's just punt: use the minimum linelength reported by
-    # all of the supported platforms: 8192 (on NT/2K/XP).
-    lt_cv_sys_max_cmd_len=8192;
-    ;;
-
-  mint*)
-    # On MiNT this can take a long time and run out of memory.
-    lt_cv_sys_max_cmd_len=8192;
-    ;;
-
-  amigaos*)
-    # On AmigaOS with pdksh, this test takes hours, literally.
-    # So we just punt and use a minimum line length of 8192.
-    lt_cv_sys_max_cmd_len=8192;
-    ;;
-
-  netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
-    # This has been around since 386BSD, at least.  Likely further.
-    if test -x /sbin/sysctl; then
-      lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
-    elif test -x /usr/sbin/sysctl; then
-      lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
-    else
-      lt_cv_sys_max_cmd_len=65536	# usable default for all BSDs
-    fi
-    # And add a safety zone
-    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
-    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
-    ;;
-
-  interix*)
-    # We know the value 262144 and hardcode it with a safety zone (like BSD)
-    lt_cv_sys_max_cmd_len=196608
-    ;;
-
-  os2*)
-    # The test takes a long time on OS/2.
-    lt_cv_sys_max_cmd_len=8192
-    ;;
-
-  osf*)
-    # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
-    # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
-    # nice to cause kernel panics so lets avoid the loop below.
-    # First set a reasonable default.
-    lt_cv_sys_max_cmd_len=16384
-    #
-    if test -x /sbin/sysconfig; then
-      case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
-        *1*) lt_cv_sys_max_cmd_len=-1 ;;
-      esac
-    fi
-    ;;
-  sco3.2v5*)
-    lt_cv_sys_max_cmd_len=102400
-    ;;
-  sysv5* | sco5v6* | sysv4.2uw2*)
-    kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
-    if test -n "$kargmax"; then
-      lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[	 ]//'`
-    else
-      lt_cv_sys_max_cmd_len=32768
-    fi
-    ;;
-  *)
-    lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
-    if test -n "$lt_cv_sys_max_cmd_len"; then
-      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
-      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
-    else
-      # Make teststring a little bigger before we do anything with it.
-      # a 1K string should be a reasonable start.
-      for i in 1 2 3 4 5 6 7 8 ; do
-        teststring=$teststring$teststring
-      done
-      SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
-      # If test is not a shell built-in, we'll probably end up computing a
-      # maximum length that is only half of the actual maximum length, but
-      # we can't tell.
-      while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \
-	         = "X$teststring$teststring"; } >/dev/null 2>&1 &&
-	      test $i != 17 # 1/2 MB should be enough
-      do
-        i=`expr $i + 1`
-        teststring=$teststring$teststring
-      done
-      # Only check the string length outside the loop.
-      lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
-      teststring=
-      # Add a significant safety factor because C++ compilers can tack on
-      # massive amounts of additional arguments before passing them to the
-      # linker.  It appears as though 1/2 is a usable value.
-      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
-    fi
-    ;;
-  esac
-
-fi
-
-if test -n $lt_cv_sys_max_cmd_len ; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5
-$as_echo "$lt_cv_sys_max_cmd_len" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5
-$as_echo "none" >&6; }
-fi
-max_cmd_len=$lt_cv_sys_max_cmd_len
-
-
-
-
-
-
-: ${CP="cp -f"}
-: ${MV="mv -f"}
-: ${RM="rm -f"}
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands some XSI constructs" >&5
-$as_echo_n "checking whether the shell understands some XSI constructs... " >&6; }
-# Try some XSI features
-xsi_shell=no
-( _lt_dummy="a/b/c"
-  test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \
-      = c,a/b,b/c, \
-    && eval 'test $(( 1 + 1 )) -eq 2 \
-    && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
-  && xsi_shell=yes
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xsi_shell" >&5
-$as_echo "$xsi_shell" >&6; }
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands \"+=\"" >&5
-$as_echo_n "checking whether the shell understands \"+=\"... " >&6; }
-lt_shell_append=no
-( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \
-    >/dev/null 2>&1 \
-  && lt_shell_append=yes
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_shell_append" >&5
-$as_echo "$lt_shell_append" >&6; }
-
-
-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
-  lt_unset=unset
-else
-  lt_unset=false
-fi
-
-
-
-
-
-# test EBCDIC or ASCII
-case `echo X|tr X '\101'` in
- A) # ASCII based system
-    # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
-  lt_SP2NL='tr \040 \012'
-  lt_NL2SP='tr \015\012 \040\040'
-  ;;
- *) # EBCDIC based system
-  lt_SP2NL='tr \100 \n'
-  lt_NL2SP='tr \r\n \100\100'
-  ;;
-esac
-
-
-
-
-
-
-
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to $host format" >&5
-$as_echo_n "checking how to convert $build file names to $host format... " >&6; }
-if ${lt_cv_to_host_file_cmd+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  case $host in
-  *-*-mingw* )
-    case $build in
-      *-*-mingw* ) # actually msys
-        lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32
-        ;;
-      *-*-cygwin* )
-        lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32
-        ;;
-      * ) # otherwise, assume *nix
-        lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32
-        ;;
-    esac
-    ;;
-  *-*-cygwin* )
-    case $build in
-      *-*-mingw* ) # actually msys
-        lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin
-        ;;
-      *-*-cygwin* )
-        lt_cv_to_host_file_cmd=func_convert_file_noop
-        ;;
-      * ) # otherwise, assume *nix
-        lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin
-        ;;
-    esac
-    ;;
-  * ) # unhandled hosts (and "normal" native builds)
-    lt_cv_to_host_file_cmd=func_convert_file_noop
-    ;;
-esac
-
-fi
-
-to_host_file_cmd=$lt_cv_to_host_file_cmd
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_host_file_cmd" >&5
-$as_echo "$lt_cv_to_host_file_cmd" >&6; }
-
-
-
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to toolchain format" >&5
-$as_echo_n "checking how to convert $build file names to toolchain format... " >&6; }
-if ${lt_cv_to_tool_file_cmd+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  #assume ordinary cross tools, or native build.
-lt_cv_to_tool_file_cmd=func_convert_file_noop
-case $host in
-  *-*-mingw* )
-    case $build in
-      *-*-mingw* ) # actually msys
-        lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32
-        ;;
-    esac
-    ;;
-esac
-
-fi
-
-to_tool_file_cmd=$lt_cv_to_tool_file_cmd
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_tool_file_cmd" >&5
-$as_echo "$lt_cv_to_tool_file_cmd" >&6; }
-
-
-
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5
-$as_echo_n "checking for $LD option to reload object files... " >&6; }
-if ${lt_cv_ld_reload_flag+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_ld_reload_flag='-r'
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5
-$as_echo "$lt_cv_ld_reload_flag" >&6; }
-reload_flag=$lt_cv_ld_reload_flag
-case $reload_flag in
-"" | " "*) ;;
-*) reload_flag=" $reload_flag" ;;
-esac
-reload_cmds='$LD$reload_flag -o $output$reload_objs'
-case $host_os in
-  cygwin* | mingw* | pw32* | cegcc*)
-    if test "$GCC" != yes; then
-      reload_cmds=false
-    fi
-    ;;
-  darwin*)
-    if test "$GCC" = yes; then
-      reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
-    else
-      reload_cmds='$LD$reload_flag -o $output$reload_objs'
-    fi
-    ;;
-esac
-
-
-
-
-
-
-
-
-
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
-set dummy ${ac_tool_prefix}objdump; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_OBJDUMP+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$OBJDUMP"; then
-  ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-OBJDUMP=$ac_cv_prog_OBJDUMP
-if test -n "$OBJDUMP"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5
-$as_echo "$OBJDUMP" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_OBJDUMP"; then
-  ac_ct_OBJDUMP=$OBJDUMP
-  # Extract the first word of "objdump", so it can be a program name with args.
-set dummy objdump; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_OBJDUMP"; then
-  ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_OBJDUMP="objdump"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP
-if test -n "$ac_ct_OBJDUMP"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5
-$as_echo "$ac_ct_OBJDUMP" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-  if test "x$ac_ct_OBJDUMP" = x; then
-    OBJDUMP="false"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    OBJDUMP=$ac_ct_OBJDUMP
-  fi
-else
-  OBJDUMP="$ac_cv_prog_OBJDUMP"
-fi
-
-test -z "$OBJDUMP" && OBJDUMP=objdump
-
-
-
-
-
-
-
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5
-$as_echo_n "checking how to recognize dependent libraries... " >&6; }
-if ${lt_cv_deplibs_check_method+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_file_magic_cmd='$MAGIC_CMD'
-lt_cv_file_magic_test_file=
-lt_cv_deplibs_check_method='unknown'
-# Need to set the preceding variable on all platforms that support
-# interlibrary dependencies.
-# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
-# 'pass_all' -- all dependencies passed with no checks.
-# 'test_compile' -- check by making test program.
-# 'file_magic [[regex]]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given extended regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
-
-case $host_os in
-aix[4-9]*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-beos*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-bsdi[45]*)
-  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  ;;
-
-cygwin*)
-  # func_win32_libid is a shell function defined in ltmain.sh
-  lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
-  lt_cv_file_magic_cmd='func_win32_libid'
-  ;;
-
-mingw* | pw32*)
-  # Base MSYS/MinGW do not provide the 'file' command needed by
-  # func_win32_libid shell function, so use a weaker test based on 'objdump',
-  # unless we find 'file', for example because we are cross-compiling.
-  # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin.
-  if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then
-    lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
-    lt_cv_file_magic_cmd='func_win32_libid'
-  else
-    # Keep this pattern in sync with the one in func_win32_libid.
-    lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)'
-    lt_cv_file_magic_cmd='$OBJDUMP -f'
-  fi
-  ;;
-
-cegcc*)
-  # use the weaker test based on 'objdump'. See mingw*.
-  lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
-  lt_cv_file_magic_cmd='$OBJDUMP -f'
-  ;;
-
-darwin* | rhapsody*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-freebsd* | dragonfly*)
-  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
-    case $host_cpu in
-    i*86 )
-      # Not sure whether the presence of OpenBSD here was a mistake.
-      # Let's accept both of them until this is cleared up.
-      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library'
-      lt_cv_file_magic_cmd=/usr/bin/file
-      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-      ;;
-    esac
-  else
-    lt_cv_deplibs_check_method=pass_all
-  fi
-  ;;
-
-gnu*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-haiku*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-hpux10.20* | hpux11*)
-  lt_cv_file_magic_cmd=/usr/bin/file
-  case $host_cpu in
-  ia64*)
-    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
-    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
-    ;;
-  hppa*64*)
-    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]'
-    lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
-    ;;
-  *)
-    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9]\.[0-9]) shared library'
-    lt_cv_file_magic_test_file=/usr/lib/libc.sl
-    ;;
-  esac
-  ;;
-
-interix[3-9]*)
-  # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
-  lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$'
-  ;;
-
-irix5* | irix6* | nonstopux*)
-  case $LD in
-  *-32|*"-32 ") libmagic=32-bit;;
-  *-n32|*"-n32 ") libmagic=N32;;
-  *-64|*"-64 ") libmagic=64-bit;;
-  *) libmagic=never-match;;
-  esac
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-# This must be glibc/ELF.
-linux* | k*bsd*-gnu | kopensolaris*-gnu)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-netbsd*)
-  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
-    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
-  else
-    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$'
-  fi
-  ;;
-
-newos6*)
-  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
-  lt_cv_file_magic_cmd=/usr/bin/file
-  lt_cv_file_magic_test_file=/usr/lib/libnls.so
-  ;;
-
-*nto* | *qnx*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-openbsd*)
-  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$'
-  else
-    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
-  fi
-  ;;
-
-osf3* | osf4* | osf5*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-rdos*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-solaris*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sysv4 | sysv4.3*)
-  case $host_vendor in
-  motorola)
-    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
-    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
-    ;;
-  ncr)
-    lt_cv_deplibs_check_method=pass_all
-    ;;
-  sequent)
-    lt_cv_file_magic_cmd='/bin/file'
-    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
-    ;;
-  sni)
-    lt_cv_file_magic_cmd='/bin/file'
-    lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib"
-    lt_cv_file_magic_test_file=/lib/libc.so
-    ;;
-  siemens)
-    lt_cv_deplibs_check_method=pass_all
-    ;;
-  pc)
-    lt_cv_deplibs_check_method=pass_all
-    ;;
-  esac
-  ;;
-
-tpf*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-esac
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5
-$as_echo "$lt_cv_deplibs_check_method" >&6; }
-
-file_magic_glob=
-want_nocaseglob=no
-if test "$build" = "$host"; then
-  case $host_os in
-  mingw* | pw32*)
-    if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then
-      want_nocaseglob=yes
-    else
-      file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[\1]\/[\1]\/g;/g"`
-    fi
-    ;;
-  esac
-fi
-
-file_magic_cmd=$lt_cv_file_magic_cmd
-deplibs_check_method=$lt_cv_deplibs_check_method
-test -z "$deplibs_check_method" && deplibs_check_method=unknown
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
-set dummy ${ac_tool_prefix}dlltool; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_DLLTOOL+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$DLLTOOL"; then
-  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-DLLTOOL=$ac_cv_prog_DLLTOOL
-if test -n "$DLLTOOL"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5
-$as_echo "$DLLTOOL" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_DLLTOOL"; then
-  ac_ct_DLLTOOL=$DLLTOOL
-  # Extract the first word of "dlltool", so it can be a program name with args.
-set dummy dlltool; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_DLLTOOL"; then
-  ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_DLLTOOL="dlltool"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL
-if test -n "$ac_ct_DLLTOOL"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5
-$as_echo "$ac_ct_DLLTOOL" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-  if test "x$ac_ct_DLLTOOL" = x; then
-    DLLTOOL="false"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    DLLTOOL=$ac_ct_DLLTOOL
-  fi
-else
-  DLLTOOL="$ac_cv_prog_DLLTOOL"
-fi
-
-test -z "$DLLTOOL" && DLLTOOL=dlltool
-
-
-
-
-
-
-
-
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to associate runtime and link libraries" >&5
-$as_echo_n "checking how to associate runtime and link libraries... " >&6; }
-if ${lt_cv_sharedlib_from_linklib_cmd+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_sharedlib_from_linklib_cmd='unknown'
-
-case $host_os in
-cygwin* | mingw* | pw32* | cegcc*)
-  # two different shell functions defined in ltmain.sh
-  # decide which to use based on capabilities of $DLLTOOL
-  case `$DLLTOOL --help 2>&1` in
-  *--identify-strict*)
-    lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
-    ;;
-  *)
-    lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback
-    ;;
-  esac
-  ;;
-*)
-  # fallback: assume linklib IS sharedlib
-  lt_cv_sharedlib_from_linklib_cmd="$ECHO"
-  ;;
-esac
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5
-$as_echo "$lt_cv_sharedlib_from_linklib_cmd" >&6; }
-sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd
-test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO
-
-
-
-
-
-
-
-
-if test -n "$ac_tool_prefix"; then
-  for ac_prog in ar
-  do
-    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_AR+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$AR"; then
-  ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_AR="$ac_tool_prefix$ac_prog"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-AR=$ac_cv_prog_AR
-if test -n "$AR"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
-$as_echo "$AR" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-    test -n "$AR" && break
-  done
-fi
-if test -z "$AR"; then
-  ac_ct_AR=$AR
-  for ac_prog in ar
-do
-  # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_AR+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_AR"; then
-  ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_AR="$ac_prog"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_AR=$ac_cv_prog_ac_ct_AR
-if test -n "$ac_ct_AR"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5
-$as_echo "$ac_ct_AR" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-  test -n "$ac_ct_AR" && break
-done
-
-  if test "x$ac_ct_AR" = x; then
-    AR="false"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    AR=$ac_ct_AR
-  fi
-fi
-
-: ${AR=ar}
-: ${AR_FLAGS=cru}
-
-
-
-
-
-
-
-
-
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5
-$as_echo_n "checking for archiver @FILE support... " >&6; }
-if ${lt_cv_ar_at_file+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_ar_at_file=no
-   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  echo conftest.$ac_objext > conftest.lst
-      lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5'
-      { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
-  (eval $lt_ar_try) 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }
-      if test "$ac_status" -eq 0; then
-	# Ensure the archiver fails upon bogus file names.
-	rm -f conftest.$ac_objext libconftest.a
-	{ { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
-  (eval $lt_ar_try) 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }
-	if test "$ac_status" -ne 0; then
-          lt_cv_ar_at_file=@
-        fi
-      fi
-      rm -f conftest.* libconftest.a
-
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5
-$as_echo "$lt_cv_ar_at_file" >&6; }
-
-if test "x$lt_cv_ar_at_file" = xno; then
-  archiver_list_spec=
-else
-  archiver_list_spec=$lt_cv_ar_at_file
-fi
-
-
-
-
-
-
-
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
-set dummy ${ac_tool_prefix}strip; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_STRIP+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$STRIP"; then
-  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-STRIP=$ac_cv_prog_STRIP
-if test -n "$STRIP"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
-$as_echo "$STRIP" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_STRIP"; then
-  ac_ct_STRIP=$STRIP
-  # Extract the first word of "strip", so it can be a program name with args.
-set dummy strip; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_STRIP"; then
-  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_STRIP="strip"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
-if test -n "$ac_ct_STRIP"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
-$as_echo "$ac_ct_STRIP" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-  if test "x$ac_ct_STRIP" = x; then
-    STRIP=":"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    STRIP=$ac_ct_STRIP
-  fi
-else
-  STRIP="$ac_cv_prog_STRIP"
-fi
-
-test -z "$STRIP" && STRIP=:
-
-
-
-
-
-
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_RANLIB+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-RANLIB=$ac_cv_prog_RANLIB
-if test -n "$RANLIB"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5
-$as_echo "$RANLIB" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_RANLIB"; then
-  ac_ct_RANLIB=$RANLIB
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_RANLIB+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_RANLIB"; then
-  ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_RANLIB="ranlib"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
-if test -n "$ac_ct_RANLIB"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5
-$as_echo "$ac_ct_RANLIB" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-  if test "x$ac_ct_RANLIB" = x; then
-    RANLIB=":"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    RANLIB=$ac_ct_RANLIB
-  fi
-else
-  RANLIB="$ac_cv_prog_RANLIB"
-fi
-
-test -z "$RANLIB" && RANLIB=:
-
-
-
-
-
-
-# Determine commands to create old-style static archives.
-old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
-old_postinstall_cmds='chmod 644 $oldlib'
-old_postuninstall_cmds=
-
-if test -n "$RANLIB"; then
-  case $host_os in
-  openbsd*)
-    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib"
-    ;;
-  *)
-    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib"
-    ;;
-  esac
-  old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib"
-fi
-
-case $host_os in
-  darwin*)
-    lock_old_archive_extraction=yes ;;
-  *)
-    lock_old_archive_extraction=no ;;
-esac
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-for ac_prog in gawk mawk nawk awk
-do
-  # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_AWK+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$AWK"; then
-  ac_cv_prog_AWK="$AWK" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_AWK="$ac_prog"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-AWK=$ac_cv_prog_AWK
-if test -n "$AWK"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5
-$as_echo "$AWK" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-  test -n "$AWK" && break
-done
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-# If no C compiler was specified, use CC.
-LTCC=${LTCC-"$CC"}
-
-# If no C compiler flags were specified, use CFLAGS.
-LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-
-# Allow CC to be a program name with arguments.
-compiler=$CC
-
-
-# Check for command to grab the raw symbol name followed by C symbol from nm.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5
-$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; }
-if ${lt_cv_sys_global_symbol_pipe+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-
-# These are sane defaults that work on at least a few old systems.
-# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
-
-# Character class describing NM global symbol codes.
-symcode='[BCDEGRST]'
-
-# Regexp to match symbols that can be accessed directly from C.
-sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
-
-# Define system-specific variables.
-case $host_os in
-aix*)
-  symcode='[BCDT]'
-  ;;
-cygwin* | mingw* | pw32* | cegcc*)
-  symcode='[ABCDGISTW]'
-  ;;
-hpux*)
-  if test "$host_cpu" = ia64; then
-    symcode='[ABCDEGRST]'
-  fi
-  ;;
-irix* | nonstopux*)
-  symcode='[BCDEGRST]'
-  ;;
-osf*)
-  symcode='[BCDEGQRST]'
-  ;;
-solaris*)
-  symcode='[BDRT]'
-  ;;
-sco3.2v5*)
-  symcode='[DT]'
-  ;;
-sysv4.2uw2*)
-  symcode='[DT]'
-  ;;
-sysv5* | sco5v6* | unixware* | OpenUNIX*)
-  symcode='[ABDT]'
-  ;;
-sysv4)
-  symcode='[DFNSTU]'
-  ;;
-esac
-
-# If we're using GNU nm, then use its standard symbol codes.
-case `$NM -V 2>&1` in
-*GNU* | *'with BFD'*)
-  symcode='[ABCDGIRSTW]' ;;
-esac
-
-# Transform an extracted symbol line into a proper C declaration.
-# Some systems (esp. on ia64) link data and code symbols differently,
-# so use this general approach.
-lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
-
-# Transform an extracted symbol line into symbol name and symbol address
-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\)[ ]*$/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"\2\", (void *) \&\2},/p'"
-lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\)[ ]*$/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/  {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"lib\2\", (void *) \&\2},/p'"
-
-# Handle CRLF in mingw tool chain
-opt_cr=
-case $build_os in
-mingw*)
-  opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
-  ;;
-esac
-
-# Try without a prefix underscore, then with it.
-for ac_symprfx in "" "_"; do
-
-  # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
-  symxfrm="\\1 $ac_symprfx\\2 \\2"
-
-  # Write the raw and C identifiers.
-  if test "$lt_cv_nm_interface" = "MS dumpbin"; then
-    # Fake it for dumpbin and say T for any non-static function
-    # and D for any global variable.
-    # Also find C++ and __fastcall symbols from MSVC++,
-    # which start with @ or ?.
-    lt_cv_sys_global_symbol_pipe="$AWK '"\
-"     {last_section=section; section=\$ 3};"\
-"     /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\
-"     /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
-"     \$ 0!~/External *\|/{next};"\
-"     / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
-"     {if(hide[section]) next};"\
-"     {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
-"     {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
-"     s[1]~/^[@?]/{print s[1], s[1]; next};"\
-"     s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
-"     ' prfx=^$ac_symprfx"
-  else
-    lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[	 ]\($symcode$symcode*\)[	 ][	 ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
-  fi
-  lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'"
-
-  # Check to see that the pipe works correctly.
-  pipe_works=no
-
-  rm -f conftest*
-  cat > conftest.$ac_ext <<_LT_EOF
-#ifdef __cplusplus
-extern "C" {
-#endif
-char nm_test_var;
-void nm_test_func(void);
-void nm_test_func(void){}
-#ifdef __cplusplus
-}
-#endif
-int main(){nm_test_var='a';nm_test_func();return(0);}
-_LT_EOF
-
-  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }; then
-    # Now try to grab the symbols.
-    nlist=conftest.nm
-    if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist\""; } >&5
-  (eval $NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; } && test -s "$nlist"; then
-      # Try sorting and uniquifying the output.
-      if sort "$nlist" | uniq > "$nlist"T; then
-	mv -f "$nlist"T "$nlist"
-      else
-	rm -f "$nlist"T
-      fi
-
-      # Make sure that we snagged all the symbols we need.
-      if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
-	if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
-	  cat <<_LT_EOF > conftest.$ac_ext
-/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests.  */
-#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
-/* DATA imports from DLLs on WIN32 con't be const, because runtime
-   relocations are performed -- see ld's documentation on pseudo-relocs.  */
-# define LT_DLSYM_CONST
-#elif defined(__osf__)
-/* This system does not cope well with relocations in const data.  */
-# define LT_DLSYM_CONST
-#else
-# define LT_DLSYM_CONST const
-#endif
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-_LT_EOF
-	  # Now generate the symbol file.
-	  eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
-
-	  cat <<_LT_EOF >> conftest.$ac_ext
-
-/* The mapping between symbol names and symbols.  */
-LT_DLSYM_CONST struct {
-  const char *name;
-  void       *address;
-}
-lt__PROGRAM__LTX_preloaded_symbols[] =
-{
-  { "@PROGRAM@", (void *) 0 },
-_LT_EOF
-	  $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
-	  cat <<\_LT_EOF >> conftest.$ac_ext
-  {0, (void *) 0}
-};
-
-/* This works around a problem in FreeBSD linker */
-#ifdef FREEBSD_WORKAROUND
-static const void *lt_preloaded_setup() {
-  return lt__PROGRAM__LTX_preloaded_symbols;
-}
-#endif
-
-#ifdef __cplusplus
-}
-#endif
-_LT_EOF
-	  # Now try linking the two files.
-	  mv conftest.$ac_objext conftstm.$ac_objext
-	  lt_globsym_save_LIBS=$LIBS
-	  lt_globsym_save_CFLAGS=$CFLAGS
-	  LIBS="conftstm.$ac_objext"
-	  CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
-	  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; } && test -s conftest${ac_exeext}; then
-	    pipe_works=yes
-	  fi
-	  LIBS=$lt_globsym_save_LIBS
-	  CFLAGS=$lt_globsym_save_CFLAGS
-	else
-	  echo "cannot find nm_test_func in $nlist" >&5
-	fi
-      else
-	echo "cannot find nm_test_var in $nlist" >&5
-      fi
-    else
-      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
-    fi
-  else
-    echo "$progname: failed program was:" >&5
-    cat conftest.$ac_ext >&5
-  fi
-  rm -rf conftest* conftst*
-
-  # Do not use the global_symbol_pipe unless it works.
-  if test "$pipe_works" = yes; then
-    break
-  else
-    lt_cv_sys_global_symbol_pipe=
-  fi
-done
-
-fi
-
-if test -z "$lt_cv_sys_global_symbol_pipe"; then
-  lt_cv_sys_global_symbol_to_cdecl=
-fi
-if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5
-$as_echo "failed" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
-$as_echo "ok" >&6; }
-fi
-
-# Response file support.
-if test "$lt_cv_nm_interface" = "MS dumpbin"; then
-  nm_file_list_spec='@'
-elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then
-  nm_file_list_spec='@'
-fi
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5
-$as_echo_n "checking for sysroot... " >&6; }
-
-# Check whether --with-sysroot was given.
-if test "${with_sysroot+set}" = set; then :
-  withval=$with_sysroot;
-else
-  with_sysroot=no
-fi
-
-
-lt_sysroot=
-case ${with_sysroot} in #(
- yes)
-   if test "$GCC" = yes; then
-     lt_sysroot=`$CC --print-sysroot 2>/dev/null`
-   fi
-   ;; #(
- /*)
-   lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"`
-   ;; #(
- no|'')
-   ;; #(
- *)
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${with_sysroot}" >&5
-$as_echo "${with_sysroot}" >&6; }
-   as_fn_error $? "The sysroot must be an absolute path." "$LINENO" 5
-   ;;
-esac
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5
-$as_echo "${lt_sysroot:-no}" >&6; }
-
-
-
-
-
-# Check whether --enable-libtool-lock was given.
-if test "${enable_libtool_lock+set}" = set; then :
-  enableval=$enable_libtool_lock;
-fi
-
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
-
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case $host in
-ia64-*-hpux*)
-  # Find out which ABI we are using.
-  echo 'int i;' > conftest.$ac_ext
-  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }; then
-    case `/usr/bin/file conftest.$ac_objext` in
-      *ELF-32*)
-	HPUX_IA64_MODE="32"
-	;;
-      *ELF-64*)
-	HPUX_IA64_MODE="64"
-	;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-*-*-irix6*)
-  # Find out which ABI we are using.
-  echo '#line '$LINENO' "configure"' > conftest.$ac_ext
-  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }; then
-    if test "$lt_cv_prog_gnu_ld" = yes; then
-      case `/usr/bin/file conftest.$ac_objext` in
-	*32-bit*)
-	  LD="${LD-ld} -melf32bsmip"
-	  ;;
-	*N32*)
-	  LD="${LD-ld} -melf32bmipn32"
-	  ;;
-	*64-bit*)
-	  LD="${LD-ld} -melf64bmip"
-	;;
-      esac
-    else
-      case `/usr/bin/file conftest.$ac_objext` in
-	*32-bit*)
-	  LD="${LD-ld} -32"
-	  ;;
-	*N32*)
-	  LD="${LD-ld} -n32"
-	  ;;
-	*64-bit*)
-	  LD="${LD-ld} -64"
-	  ;;
-      esac
-    fi
-  fi
-  rm -rf conftest*
-  ;;
-
-x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
-s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
-  # Find out which ABI we are using.
-  echo 'int i;' > conftest.$ac_ext
-  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }; then
-    case `/usr/bin/file conftest.o` in
-      *32-bit*)
-	case $host in
-	  x86_64-*kfreebsd*-gnu)
-	    LD="${LD-ld} -m elf_i386_fbsd"
-	    ;;
-	  x86_64-*linux*)
-	    LD="${LD-ld} -m elf_i386"
-	    ;;
-	  ppc64-*linux*|powerpc64-*linux*)
-	    LD="${LD-ld} -m elf32ppclinux"
-	    ;;
-	  s390x-*linux*)
-	    LD="${LD-ld} -m elf_s390"
-	    ;;
-	  sparc64-*linux*)
-	    LD="${LD-ld} -m elf32_sparc"
-	    ;;
-	esac
-	;;
-      *64-bit*)
-	case $host in
-	  x86_64-*kfreebsd*-gnu)
-	    LD="${LD-ld} -m elf_x86_64_fbsd"
-	    ;;
-	  x86_64-*linux*)
-	    LD="${LD-ld} -m elf_x86_64"
-	    ;;
-	  ppc*-*linux*|powerpc*-*linux*)
-	    LD="${LD-ld} -m elf64ppc"
-	    ;;
-	  s390*-*linux*|s390*-*tpf*)
-	    LD="${LD-ld} -m elf64_s390"
-	    ;;
-	  sparc*-*linux*)
-	    LD="${LD-ld} -m elf64_sparc"
-	    ;;
-	esac
-	;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-*-*-sco3.2v5*)
-  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-  SAVE_CFLAGS="$CFLAGS"
-  CFLAGS="$CFLAGS -belf"
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5
-$as_echo_n "checking whether the C compiler needs -belf... " >&6; }
-if ${lt_cv_cc_needs_belf+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-     cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-  lt_cv_cc_needs_belf=yes
-else
-  lt_cv_cc_needs_belf=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-     ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5
-$as_echo "$lt_cv_cc_needs_belf" >&6; }
-  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-    CFLAGS="$SAVE_CFLAGS"
-  fi
-  ;;
-*-*solaris*)
-  # Find out which ABI we are using.
-  echo 'int i;' > conftest.$ac_ext
-  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }; then
-    case `/usr/bin/file conftest.o` in
-    *64-bit*)
-      case $lt_cv_prog_gnu_ld in
-      yes*)
-        case $host in
-        i?86-*-solaris*)
-          LD="${LD-ld} -m elf_x86_64"
-          ;;
-        sparc*-*-solaris*)
-          LD="${LD-ld} -m elf64_sparc"
-          ;;
-        esac
-        # GNU ld 2.21 introduced _sol2 emulations.  Use them if available.
-        if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then
-          LD="${LD-ld}_sol2"
-        fi
-        ;;
-      *)
-	if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
-	  LD="${LD-ld} -64"
-	fi
-	;;
-      esac
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-esac
-
-need_locks="$enable_libtool_lock"
-
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args.
-set dummy ${ac_tool_prefix}mt; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_MANIFEST_TOOL+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$MANIFEST_TOOL"; then
-  ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL
-if test -n "$MANIFEST_TOOL"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MANIFEST_TOOL" >&5
-$as_echo "$MANIFEST_TOOL" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_MANIFEST_TOOL"; then
-  ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL
-  # Extract the first word of "mt", so it can be a program name with args.
-set dummy mt; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_MANIFEST_TOOL+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_MANIFEST_TOOL"; then
-  ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_MANIFEST_TOOL="mt"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL
-if test -n "$ac_ct_MANIFEST_TOOL"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MANIFEST_TOOL" >&5
-$as_echo "$ac_ct_MANIFEST_TOOL" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-  if test "x$ac_ct_MANIFEST_TOOL" = x; then
-    MANIFEST_TOOL=":"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL
-  fi
-else
-  MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL"
-fi
-
-test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5
-$as_echo_n "checking if $MANIFEST_TOOL is a manifest tool... " >&6; }
-if ${lt_cv_path_mainfest_tool+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_path_mainfest_tool=no
-  echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5
-  $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out
-  cat conftest.err >&5
-  if $GREP 'Manifest Tool' conftest.out > /dev/null; then
-    lt_cv_path_mainfest_tool=yes
-  fi
-  rm -f conftest*
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5
-$as_echo "$lt_cv_path_mainfest_tool" >&6; }
-if test "x$lt_cv_path_mainfest_tool" != xyes; then
-  MANIFEST_TOOL=:
-fi
-
-
-
-
-
-
-  case $host_os in
-    rhapsody* | darwin*)
-    if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args.
-set dummy ${ac_tool_prefix}dsymutil; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_DSYMUTIL+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$DSYMUTIL"; then
-  ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-DSYMUTIL=$ac_cv_prog_DSYMUTIL
-if test -n "$DSYMUTIL"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5
-$as_echo "$DSYMUTIL" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_DSYMUTIL"; then
-  ac_ct_DSYMUTIL=$DSYMUTIL
-  # Extract the first word of "dsymutil", so it can be a program name with args.
-set dummy dsymutil; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_DSYMUTIL+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_DSYMUTIL"; then
-  ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_DSYMUTIL="dsymutil"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL
-if test -n "$ac_ct_DSYMUTIL"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5
-$as_echo "$ac_ct_DSYMUTIL" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-  if test "x$ac_ct_DSYMUTIL" = x; then
-    DSYMUTIL=":"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    DSYMUTIL=$ac_ct_DSYMUTIL
-  fi
-else
-  DSYMUTIL="$ac_cv_prog_DSYMUTIL"
-fi
-
-    if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args.
-set dummy ${ac_tool_prefix}nmedit; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_NMEDIT+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$NMEDIT"; then
-  ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-NMEDIT=$ac_cv_prog_NMEDIT
-if test -n "$NMEDIT"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5
-$as_echo "$NMEDIT" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_NMEDIT"; then
-  ac_ct_NMEDIT=$NMEDIT
-  # Extract the first word of "nmedit", so it can be a program name with args.
-set dummy nmedit; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_NMEDIT+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_NMEDIT"; then
-  ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_NMEDIT="nmedit"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT
-if test -n "$ac_ct_NMEDIT"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5
-$as_echo "$ac_ct_NMEDIT" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-  if test "x$ac_ct_NMEDIT" = x; then
-    NMEDIT=":"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    NMEDIT=$ac_ct_NMEDIT
-  fi
-else
-  NMEDIT="$ac_cv_prog_NMEDIT"
-fi
-
-    if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args.
-set dummy ${ac_tool_prefix}lipo; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_LIPO+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$LIPO"; then
-  ac_cv_prog_LIPO="$LIPO" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_LIPO="${ac_tool_prefix}lipo"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-LIPO=$ac_cv_prog_LIPO
-if test -n "$LIPO"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5
-$as_echo "$LIPO" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_LIPO"; then
-  ac_ct_LIPO=$LIPO
-  # Extract the first word of "lipo", so it can be a program name with args.
-set dummy lipo; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_LIPO+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_LIPO"; then
-  ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_LIPO="lipo"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO
-if test -n "$ac_ct_LIPO"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5
-$as_echo "$ac_ct_LIPO" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-  if test "x$ac_ct_LIPO" = x; then
-    LIPO=":"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    LIPO=$ac_ct_LIPO
-  fi
-else
-  LIPO="$ac_cv_prog_LIPO"
-fi
-
-    if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args.
-set dummy ${ac_tool_prefix}otool; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_OTOOL+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$OTOOL"; then
-  ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_OTOOL="${ac_tool_prefix}otool"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-OTOOL=$ac_cv_prog_OTOOL
-if test -n "$OTOOL"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5
-$as_echo "$OTOOL" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_OTOOL"; then
-  ac_ct_OTOOL=$OTOOL
-  # Extract the first word of "otool", so it can be a program name with args.
-set dummy otool; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_OTOOL+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_OTOOL"; then
-  ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_OTOOL="otool"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL
-if test -n "$ac_ct_OTOOL"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5
-$as_echo "$ac_ct_OTOOL" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-  if test "x$ac_ct_OTOOL" = x; then
-    OTOOL=":"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    OTOOL=$ac_ct_OTOOL
-  fi
-else
-  OTOOL="$ac_cv_prog_OTOOL"
-fi
-
-    if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args.
-set dummy ${ac_tool_prefix}otool64; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_OTOOL64+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$OTOOL64"; then
-  ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-OTOOL64=$ac_cv_prog_OTOOL64
-if test -n "$OTOOL64"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5
-$as_echo "$OTOOL64" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_OTOOL64"; then
-  ac_ct_OTOOL64=$OTOOL64
-  # Extract the first word of "otool64", so it can be a program name with args.
-set dummy otool64; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_OTOOL64+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_OTOOL64"; then
-  ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_OTOOL64="otool64"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64
-if test -n "$ac_ct_OTOOL64"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5
-$as_echo "$ac_ct_OTOOL64" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-  if test "x$ac_ct_OTOOL64" = x; then
-    OTOOL64=":"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    OTOOL64=$ac_ct_OTOOL64
-  fi
-else
-  OTOOL64="$ac_cv_prog_OTOOL64"
-fi
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5
-$as_echo_n "checking for -single_module linker flag... " >&6; }
-if ${lt_cv_apple_cc_single_mod+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_apple_cc_single_mod=no
-      if test -z "${LT_MULTI_MODULE}"; then
-	# By default we will add the -single_module flag. You can override
-	# by either setting the environment variable LT_MULTI_MODULE
-	# non-empty at configure time, or by adding -multi_module to the
-	# link flags.
-	rm -rf libconftest.dylib*
-	echo "int foo(void){return 1;}" > conftest.c
-	echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
--dynamiclib -Wl,-single_module conftest.c" >&5
-	$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
-	  -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
-        _lt_result=$?
-	# If there is a non-empty error log, and "single_module"
-	# appears in it, assume the flag caused a linker warning
-        if test -s conftest.err && $GREP single_module conftest.err; then
-	  cat conftest.err >&5
-	# Otherwise, if the output was created with a 0 exit code from
-	# the compiler, it worked.
-	elif test -f libconftest.dylib && test $_lt_result -eq 0; then
-	  lt_cv_apple_cc_single_mod=yes
-	else
-	  cat conftest.err >&5
-	fi
-	rm -rf libconftest.dylib*
-	rm -f conftest.*
-      fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5
-$as_echo "$lt_cv_apple_cc_single_mod" >&6; }
-
-    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5
-$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; }
-if ${lt_cv_ld_exported_symbols_list+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_ld_exported_symbols_list=no
-      save_LDFLAGS=$LDFLAGS
-      echo "_main" > conftest.sym
-      LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
-      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-  lt_cv_ld_exported_symbols_list=yes
-else
-  lt_cv_ld_exported_symbols_list=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-	LDFLAGS="$save_LDFLAGS"
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5
-$as_echo "$lt_cv_ld_exported_symbols_list" >&6; }
-
-    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -force_load linker flag" >&5
-$as_echo_n "checking for -force_load linker flag... " >&6; }
-if ${lt_cv_ld_force_load+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_ld_force_load=no
-      cat > conftest.c << _LT_EOF
-int forced_loaded() { return 2;}
-_LT_EOF
-      echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&5
-      $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5
-      echo "$AR cru libconftest.a conftest.o" >&5
-      $AR cru libconftest.a conftest.o 2>&5
-      echo "$RANLIB libconftest.a" >&5
-      $RANLIB libconftest.a 2>&5
-      cat > conftest.c << _LT_EOF
-int main() { return 0;}
-_LT_EOF
-      echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&5
-      $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err
-      _lt_result=$?
-      if test -s conftest.err && $GREP force_load conftest.err; then
-	cat conftest.err >&5
-      elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then
-	lt_cv_ld_force_load=yes
-      else
-	cat conftest.err >&5
-      fi
-        rm -f conftest.err libconftest.a conftest conftest.c
-        rm -rf conftest.dSYM
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_force_load" >&5
-$as_echo "$lt_cv_ld_force_load" >&6; }
-    case $host_os in
-    rhapsody* | darwin1.[012])
-      _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
-    darwin1.*)
-      _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
-    darwin*) # darwin 5.x on
-      # if running on 10.5 or later, the deployment target defaults
-      # to the OS version, if on x86, and 10.4, the deployment
-      # target defaults to 10.4. Don't you love it?
-      case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
-	10.0,*86*-darwin8*|10.0,*-darwin[91]*)
-	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
-	10.[012]*)
-	  _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
-	10.*)
-	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
-      esac
-    ;;
-  esac
-    if test "$lt_cv_apple_cc_single_mod" = "yes"; then
-      _lt_dar_single_mod='$single_module'
-    fi
-    if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
-      _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
-    else
-      _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
-    fi
-    if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then
-      _lt_dsymutil='~$DSYMUTIL $lib || :'
-    else
-      _lt_dsymutil=
-    fi
-    ;;
-  esac
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5
-$as_echo_n "checking how to run the C preprocessor... " >&6; }
-# On Suns, sometimes $CPP names a directory.
-if test -n "$CPP" && test -d "$CPP"; then
-  CPP=
-fi
-if test -z "$CPP"; then
-  if ${ac_cv_prog_CPP+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-      # Double quotes because CPP needs to be expanded
-    for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
-    do
-      ac_preproc_ok=false
-for ac_c_preproc_warn_flag in '' yes
-do
-  # Use a header file that comes with gcc, so configuring glibc
-  # with a fresh cross-compiler works.
-  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-  # <limits.h> exists even on freestanding compilers.
-  # On the NeXT, cc -E runs the code through the compiler's parser,
-  # not just through cpp. "Syntax error" is here to catch this case.
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-		     Syntax error
-_ACEOF
-if ac_fn_c_try_cpp "$LINENO"; then :
-
-else
-  # Broken: fails on valid input.
-continue
-fi
-rm -f conftest.err conftest.i conftest.$ac_ext
-
-  # OK, works on sane cases.  Now check whether nonexistent headers
-  # can be detected and how.
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include <ac_nonexistent.h>
-_ACEOF
-if ac_fn_c_try_cpp "$LINENO"; then :
-  # Broken: success on invalid input.
-continue
-else
-  # Passes both tests.
-ac_preproc_ok=:
-break
-fi
-rm -f conftest.err conftest.i conftest.$ac_ext
-
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.i conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then :
-  break
-fi
-
-    done
-    ac_cv_prog_CPP=$CPP
-
-fi
-  CPP=$ac_cv_prog_CPP
-else
-  ac_cv_prog_CPP=$CPP
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5
-$as_echo "$CPP" >&6; }
-ac_preproc_ok=false
-for ac_c_preproc_warn_flag in '' yes
-do
-  # Use a header file that comes with gcc, so configuring glibc
-  # with a fresh cross-compiler works.
-  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-  # <limits.h> exists even on freestanding compilers.
-  # On the NeXT, cc -E runs the code through the compiler's parser,
-  # not just through cpp. "Syntax error" is here to catch this case.
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-		     Syntax error
-_ACEOF
-if ac_fn_c_try_cpp "$LINENO"; then :
-
-else
-  # Broken: fails on valid input.
-continue
-fi
-rm -f conftest.err conftest.i conftest.$ac_ext
-
-  # OK, works on sane cases.  Now check whether nonexistent headers
-  # can be detected and how.
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include <ac_nonexistent.h>
-_ACEOF
-if ac_fn_c_try_cpp "$LINENO"; then :
-  # Broken: success on invalid input.
-continue
-else
-  # Passes both tests.
-ac_preproc_ok=:
-break
-fi
-rm -f conftest.err conftest.i conftest.$ac_ext
-
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.i conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then :
-
-else
-  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "C preprocessor \"$CPP\" fails sanity check
-See \`config.log' for more details" "$LINENO" 5; }
-fi
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
-$as_echo_n "checking for ANSI C header files... " >&6; }
-if ${ac_cv_header_stdc+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include <stdlib.h>
-#include <stdarg.h>
-#include <string.h>
-#include <float.h>
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  ac_cv_header_stdc=yes
-else
-  ac_cv_header_stdc=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-
-if test $ac_cv_header_stdc = yes; then
-  # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include <string.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  $EGREP "memchr" >/dev/null 2>&1; then :
-
-else
-  ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-fi
-
-if test $ac_cv_header_stdc = yes; then
-  # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include <stdlib.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  $EGREP "free" >/dev/null 2>&1; then :
-
-else
-  ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-fi
-
-if test $ac_cv_header_stdc = yes; then
-  # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
-  if test "$cross_compiling" = yes; then :
-  :
-else
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include <ctype.h>
-#include <stdlib.h>
-#if ((' ' & 0x0FF) == 0x020)
-# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
-# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
-#else
-# define ISLOWER(c) \
-		   (('a' <= (c) && (c) <= 'i') \
-		     || ('j' <= (c) && (c) <= 'r') \
-		     || ('s' <= (c) && (c) <= 'z'))
-# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
-#endif
-
-#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
-int
-main ()
-{
-  int i;
-  for (i = 0; i < 256; i++)
-    if (XOR (islower (i), ISLOWER (i))
-	|| toupper (i) != TOUPPER (i))
-      return 2;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_run "$LINENO"; then :
-
-else
-  ac_cv_header_stdc=no
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
-  conftest.$ac_objext conftest.beam conftest.$ac_ext
-fi
-
-fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5
-$as_echo "$ac_cv_header_stdc" >&6; }
-if test $ac_cv_header_stdc = yes; then
-
-$as_echo "#define STDC_HEADERS 1" >>confdefs.h
-
-fi
-
-# On IRIX 5.3, sys/types and inttypes.h are conflicting.
-for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
-		  inttypes.h stdint.h unistd.h
-do :
-  as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
-"
-if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
-  cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-
-done
-
-
-for ac_header in dlfcn.h
-do :
-  ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default
-"
-if test "x$ac_cv_header_dlfcn_h" = xyes; then :
-  cat >>confdefs.h <<_ACEOF
-#define HAVE_DLFCN_H 1
-_ACEOF
-
-fi
-
-done
-
-
-
-
-
-# Set options
-
-
-
-        enable_dlopen=no
-
-
-  enable_win32_dll=no
-
-
-            # Check whether --enable-shared was given.
-if test "${enable_shared+set}" = set; then :
-  enableval=$enable_shared; p=${PACKAGE-default}
-    case $enableval in
-    yes) enable_shared=yes ;;
-    no) enable_shared=no ;;
-    *)
-      enable_shared=no
-      # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-      for pkg in $enableval; do
-	IFS="$lt_save_ifs"
-	if test "X$pkg" = "X$p"; then
-	  enable_shared=yes
-	fi
-      done
-      IFS="$lt_save_ifs"
-      ;;
-    esac
-else
-  enable_shared=yes
-fi
-
-
-
-
-
-
-
-
-
-  # Check whether --enable-static was given.
-if test "${enable_static+set}" = set; then :
-  enableval=$enable_static; p=${PACKAGE-default}
-    case $enableval in
-    yes) enable_static=yes ;;
-    no) enable_static=no ;;
-    *)
-     enable_static=no
-      # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-      for pkg in $enableval; do
-	IFS="$lt_save_ifs"
-	if test "X$pkg" = "X$p"; then
-	  enable_static=yes
-	fi
-      done
-      IFS="$lt_save_ifs"
-      ;;
-    esac
-else
-  enable_static=yes
-fi
-
-
-
-
-
-
-
-
-
-
-# Check whether --with-pic was given.
-if test "${with_pic+set}" = set; then :
-  withval=$with_pic; lt_p=${PACKAGE-default}
-    case $withval in
-    yes|no) pic_mode=$withval ;;
-    *)
-      pic_mode=default
-      # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-      for lt_pkg in $withval; do
-	IFS="$lt_save_ifs"
-	if test "X$lt_pkg" = "X$lt_p"; then
-	  pic_mode=yes
-	fi
-      done
-      IFS="$lt_save_ifs"
-      ;;
-    esac
-else
-  pic_mode=default
-fi
-
-
-test -z "$pic_mode" && pic_mode=default
-
-
-
-
-
-
-
-  # Check whether --enable-fast-install was given.
-if test "${enable_fast_install+set}" = set; then :
-  enableval=$enable_fast_install; p=${PACKAGE-default}
-    case $enableval in
-    yes) enable_fast_install=yes ;;
-    no) enable_fast_install=no ;;
-    *)
-      enable_fast_install=no
-      # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-      for pkg in $enableval; do
-	IFS="$lt_save_ifs"
-	if test "X$pkg" = "X$p"; then
-	  enable_fast_install=yes
-	fi
-      done
-      IFS="$lt_save_ifs"
-      ;;
-    esac
-else
-  enable_fast_install=yes
-fi
-
-
-
-
-
-
-
-
-
-
-
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ltmain"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-test -z "$LN_S" && LN_S="ln -s"
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-if test -n "${ZSH_VERSION+set}" ; then
-   setopt NO_GLOB_SUBST
-fi
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5
-$as_echo_n "checking for objdir... " >&6; }
-if ${lt_cv_objdir+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  rm -f .libs 2>/dev/null
-mkdir .libs 2>/dev/null
-if test -d .libs; then
-  lt_cv_objdir=.libs
-else
-  # MS-DOS does not allow filenames that begin with a dot.
-  lt_cv_objdir=_libs
-fi
-rmdir .libs 2>/dev/null
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5
-$as_echo "$lt_cv_objdir" >&6; }
-objdir=$lt_cv_objdir
-
-
-
-
-
-cat >>confdefs.h <<_ACEOF
-#define LT_OBJDIR "$lt_cv_objdir/"
-_ACEOF
-
-
-
-
-case $host_os in
-aix3*)
-  # AIX sometimes has problems with the GCC collect2 program.  For some
-  # reason, if we set the COLLECT_NAMES environment variable, the problems
-  # vanish in a puff of smoke.
-  if test "X${COLLECT_NAMES+set}" != Xset; then
-    COLLECT_NAMES=
-    export COLLECT_NAMES
-  fi
-  ;;
-esac
-
-# Global variables:
-ofile=libtool
-can_build_shared=yes
-
-# All known linkers require a `.a' archive for static linking (except MSVC,
-# which needs '.lib').
-libext=a
-
-with_gnu_ld="$lt_cv_prog_gnu_ld"
-
-old_CC="$CC"
-old_CFLAGS="$CFLAGS"
-
-# Set sane defaults for various variables
-test -z "$CC" && CC=cc
-test -z "$LTCC" && LTCC=$CC
-test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
-test -z "$LD" && LD=ld
-test -z "$ac_objext" && ac_objext=o
-
-for cc_temp in $compiler""; do
-  case $cc_temp in
-    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-    \-*) ;;
-    *) break;;
-  esac
-done
-cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
-
-
-# Only perform the check for file, if the check method requires it
-test -z "$MAGIC_CMD" && MAGIC_CMD=file
-case $deplibs_check_method in
-file_magic*)
-  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5
-$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; }
-if ${lt_cv_path_MAGIC_CMD+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  case $MAGIC_CMD in
-[\\/*] |  ?:[\\/]*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-  ;;
-*)
-  lt_save_MAGIC_CMD="$MAGIC_CMD"
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-  ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
-  for ac_dir in $ac_dummy; do
-    IFS="$lt_save_ifs"
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/${ac_tool_prefix}file; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
-      if test -n "$file_magic_test_file"; then
-	case $deplibs_check_method in
-	"file_magic "*)
-	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
-	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-	    $EGREP "$file_magic_regex" > /dev/null; then
-	    :
-	  else
-	    cat <<_LT_EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such.  This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem.  Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool at gnu.org
-
-_LT_EOF
-	  fi ;;
-	esac
-      fi
-      break
-    fi
-  done
-  IFS="$lt_save_ifs"
-  MAGIC_CMD="$lt_save_MAGIC_CMD"
-  ;;
-esac
-fi
-
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
-$as_echo "$MAGIC_CMD" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-
-
-
-if test -z "$lt_cv_path_MAGIC_CMD"; then
-  if test -n "$ac_tool_prefix"; then
-    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5
-$as_echo_n "checking for file... " >&6; }
-if ${lt_cv_path_MAGIC_CMD+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  case $MAGIC_CMD in
-[\\/*] |  ?:[\\/]*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-  ;;
-*)
-  lt_save_MAGIC_CMD="$MAGIC_CMD"
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-  ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
-  for ac_dir in $ac_dummy; do
-    IFS="$lt_save_ifs"
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/file; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/file"
-      if test -n "$file_magic_test_file"; then
-	case $deplibs_check_method in
-	"file_magic "*)
-	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
-	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-	    $EGREP "$file_magic_regex" > /dev/null; then
-	    :
-	  else
-	    cat <<_LT_EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such.  This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem.  Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool at gnu.org
-
-_LT_EOF
-	  fi ;;
-	esac
-      fi
-      break
-    fi
-  done
-  IFS="$lt_save_ifs"
-  MAGIC_CMD="$lt_save_MAGIC_CMD"
-  ;;
-esac
-fi
-
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
-$as_echo "$MAGIC_CMD" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-  else
-    MAGIC_CMD=:
-  fi
-fi
-
-  fi
-  ;;
-esac
-
-# Use C for the default configuration in the libtool script
-
-lt_save_CC="$CC"
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-# Source file extension for C test sources.
-ac_ext=c
-
-# Object file extension for compiled C test sources.
-objext=o
-objext=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="int some_variable = 0;"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='int main(){return(0);}'
-
-
-
-
-
-
-
-# If no C compiler was specified, use CC.
-LTCC=${LTCC-"$CC"}
-
-# If no C compiler flags were specified, use CFLAGS.
-LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-
-# Allow CC to be a program name with arguments.
-compiler=$CC
-
-# Save the default compiler, since it gets overwritten when the other
-# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
-compiler_DEFAULT=$CC
-
-# save warnings/boilerplate of simple test code
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_compile_test_code" >conftest.$ac_ext
-eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_compiler_boilerplate=`cat conftest.err`
-$RM conftest*
-
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_link_test_code" >conftest.$ac_ext
-eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_linker_boilerplate=`cat conftest.err`
-$RM -r conftest*
-
-
-## CAVEAT EMPTOR:
-## There is no encapsulation within the following macros, do not change
-## the running order or otherwise move them around unless you know exactly
-## what you are doing...
-if test -n "$compiler"; then
-
-lt_prog_compiler_no_builtin_flag=
-
-if test "$GCC" = yes; then
-  case $cc_basename in
-  nvcc*)
-    lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;;
-  *)
-    lt_prog_compiler_no_builtin_flag=' -fno-builtin' ;;
-  esac
-
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
-$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; }
-if ${lt_cv_prog_compiler_rtti_exceptions+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_prog_compiler_rtti_exceptions=no
-   ac_outfile=conftest.$ac_objext
-   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-   lt_compiler_flag="-fno-rtti -fno-exceptions"
-   # Insert the option either (1) after the last *FLAGS variable, or
-   # (2) before a word containing "conftest.", or (3) at the end.
-   # Note that $ac_compile itself does not contain backslashes and begins
-   # with a dollar sign (not a hyphen), so the echo should work correctly.
-   # The option is referenced via a variable to avoid confusing sed.
-   lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-   -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
-   (eval "$lt_compile" 2>conftest.err)
-   ac_status=$?
-   cat conftest.err >&5
-   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-   if (exit $ac_status) && test -s "$ac_outfile"; then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings other than the usual output.
-     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
-     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
-       lt_cv_prog_compiler_rtti_exceptions=yes
-     fi
-   fi
-   $RM conftest*
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
-$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; }
-
-if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
-    lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions"
-else
-    :
-fi
-
-fi
-
-
-
-
-
-
-  lt_prog_compiler_wl=
-lt_prog_compiler_pic=
-lt_prog_compiler_static=
-
-
-  if test "$GCC" = yes; then
-    lt_prog_compiler_wl='-Wl,'
-    lt_prog_compiler_static='-static'
-
-    case $host_os in
-      aix*)
-      # All AIX code is PIC.
-      if test "$host_cpu" = ia64; then
-	# AIX 5 now supports IA64 processor
-	lt_prog_compiler_static='-Bstatic'
-      fi
-      ;;
-
-    amigaos*)
-      case $host_cpu in
-      powerpc)
-            # see comment about AmigaOS4 .so support
-            lt_prog_compiler_pic='-fPIC'
-        ;;
-      m68k)
-            # FIXME: we need at least 68020 code to build shared libraries, but
-            # adding the `-m68020' flag to GCC prevents building anything better,
-            # like `-m68040'.
-            lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4'
-        ;;
-      esac
-      ;;
-
-    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-      # PIC is the default for these OSes.
-      ;;
-
-    mingw* | cygwin* | pw32* | os2* | cegcc*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      # Although the cygwin gcc ignores -fPIC, still need this for old-style
-      # (--disable-auto-import) libraries
-      lt_prog_compiler_pic='-DDLL_EXPORT'
-      ;;
-
-    darwin* | rhapsody*)
-      # PIC is the default on this platform
-      # Common symbols not allowed in MH_DYLIB files
-      lt_prog_compiler_pic='-fno-common'
-      ;;
-
-    haiku*)
-      # PIC is the default for Haiku.
-      # The "-static" flag exists, but is broken.
-      lt_prog_compiler_static=
-      ;;
-
-    hpux*)
-      # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
-      # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
-      # sets the default TLS model and affects inlining.
-      case $host_cpu in
-      hppa*64*)
-	# +Z the default
-	;;
-      *)
-	lt_prog_compiler_pic='-fPIC'
-	;;
-      esac
-      ;;
-
-    interix[3-9]*)
-      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
-      # Instead, we relocate shared libraries at runtime.
-      ;;
-
-    msdosdjgpp*)
-      # Just because we use GCC doesn't mean we suddenly get shared libraries
-      # on systems that don't support them.
-      lt_prog_compiler_can_build_shared=no
-      enable_shared=no
-      ;;
-
-    *nto* | *qnx*)
-      # QNX uses GNU C++, but need to define -shared option too, otherwise
-      # it will coredump.
-      lt_prog_compiler_pic='-fPIC -shared'
-      ;;
-
-    sysv4*MP*)
-      if test -d /usr/nec; then
-	lt_prog_compiler_pic=-Kconform_pic
-      fi
-      ;;
-
-    *)
-      lt_prog_compiler_pic='-fPIC'
-      ;;
-    esac
-
-    case $cc_basename in
-    nvcc*) # Cuda Compiler Driver 2.2
-      lt_prog_compiler_wl='-Xlinker '
-      if test -n "$lt_prog_compiler_pic"; then
-        lt_prog_compiler_pic="-Xcompiler $lt_prog_compiler_pic"
-      fi
-      ;;
-    esac
-  else
-    # PORTME Check for flag to pass linker flags through the system compiler.
-    case $host_os in
-    aix*)
-      lt_prog_compiler_wl='-Wl,'
-      if test "$host_cpu" = ia64; then
-	# AIX 5 now supports IA64 processor
-	lt_prog_compiler_static='-Bstatic'
-      else
-	lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp'
-      fi
-      ;;
-
-    mingw* | cygwin* | pw32* | os2* | cegcc*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      lt_prog_compiler_pic='-DDLL_EXPORT'
-      ;;
-
-    hpux9* | hpux10* | hpux11*)
-      lt_prog_compiler_wl='-Wl,'
-      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-      # not for PA HP-UX.
-      case $host_cpu in
-      hppa*64*|ia64*)
-	# +Z the default
-	;;
-      *)
-	lt_prog_compiler_pic='+Z'
-	;;
-      esac
-      # Is there a better lt_prog_compiler_static that works with the bundled CC?
-      lt_prog_compiler_static='${wl}-a ${wl}archive'
-      ;;
-
-    irix5* | irix6* | nonstopux*)
-      lt_prog_compiler_wl='-Wl,'
-      # PIC (with -KPIC) is the default.
-      lt_prog_compiler_static='-non_shared'
-      ;;
-
-    linux* | k*bsd*-gnu | kopensolaris*-gnu)
-      case $cc_basename in
-      # old Intel for x86_64 which still supported -KPIC.
-      ecc*)
-	lt_prog_compiler_wl='-Wl,'
-	lt_prog_compiler_pic='-KPIC'
-	lt_prog_compiler_static='-static'
-        ;;
-      # icc used to be incompatible with GCC.
-      # ICC 10 doesn't accept -KPIC any more.
-      icc* | ifort*)
-	lt_prog_compiler_wl='-Wl,'
-	lt_prog_compiler_pic='-fPIC'
-	lt_prog_compiler_static='-static'
-        ;;
-      # Lahey Fortran 8.1.
-      lf95*)
-	lt_prog_compiler_wl='-Wl,'
-	lt_prog_compiler_pic='--shared'
-	lt_prog_compiler_static='--static'
-	;;
-      nagfor*)
-	# NAG Fortran compiler
-	lt_prog_compiler_wl='-Wl,-Wl,,'
-	lt_prog_compiler_pic='-PIC'
-	lt_prog_compiler_static='-Bstatic'
-	;;
-      pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
-        # Portland Group compilers (*not* the Pentium gcc compiler,
-	# which looks to be a dead project)
-	lt_prog_compiler_wl='-Wl,'
-	lt_prog_compiler_pic='-fpic'
-	lt_prog_compiler_static='-Bstatic'
-        ;;
-      ccc*)
-        lt_prog_compiler_wl='-Wl,'
-        # All Alpha code is PIC.
-        lt_prog_compiler_static='-non_shared'
-        ;;
-      xl* | bgxl* | bgf* | mpixl*)
-	# IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene
-	lt_prog_compiler_wl='-Wl,'
-	lt_prog_compiler_pic='-qpic'
-	lt_prog_compiler_static='-qstaticlink'
-	;;
-      *)
-	case `$CC -V 2>&1 | sed 5q` in
-	*Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [1-7].* | *Sun*Fortran*\ 8.[0-3]*)
-	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
-	  lt_prog_compiler_pic='-KPIC'
-	  lt_prog_compiler_static='-Bstatic'
-	  lt_prog_compiler_wl=''
-	  ;;
-	*Sun\ F* | *Sun*Fortran*)
-	  lt_prog_compiler_pic='-KPIC'
-	  lt_prog_compiler_static='-Bstatic'
-	  lt_prog_compiler_wl='-Qoption ld '
-	  ;;
-	*Sun\ C*)
-	  # Sun C 5.9
-	  lt_prog_compiler_pic='-KPIC'
-	  lt_prog_compiler_static='-Bstatic'
-	  lt_prog_compiler_wl='-Wl,'
-	  ;;
-        *Intel*\ [CF]*Compiler*)
-	  lt_prog_compiler_wl='-Wl,'
-	  lt_prog_compiler_pic='-fPIC'
-	  lt_prog_compiler_static='-static'
-	  ;;
-	*Portland\ Group*)
-	  lt_prog_compiler_wl='-Wl,'
-	  lt_prog_compiler_pic='-fpic'
-	  lt_prog_compiler_static='-Bstatic'
-	  ;;
-	esac
-	;;
-      esac
-      ;;
-
-    newsos6)
-      lt_prog_compiler_pic='-KPIC'
-      lt_prog_compiler_static='-Bstatic'
-      ;;
-
-    *nto* | *qnx*)
-      # QNX uses GNU C++, but need to define -shared option too, otherwise
-      # it will coredump.
-      lt_prog_compiler_pic='-fPIC -shared'
-      ;;
-
-    osf3* | osf4* | osf5*)
-      lt_prog_compiler_wl='-Wl,'
-      # All OSF/1 code is PIC.
-      lt_prog_compiler_static='-non_shared'
-      ;;
-
-    rdos*)
-      lt_prog_compiler_static='-non_shared'
-      ;;
-
-    solaris*)
-      lt_prog_compiler_pic='-KPIC'
-      lt_prog_compiler_static='-Bstatic'
-      case $cc_basename in
-      f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
-	lt_prog_compiler_wl='-Qoption ld ';;
-      *)
-	lt_prog_compiler_wl='-Wl,';;
-      esac
-      ;;
-
-    sunos4*)
-      lt_prog_compiler_wl='-Qoption ld '
-      lt_prog_compiler_pic='-PIC'
-      lt_prog_compiler_static='-Bstatic'
-      ;;
-
-    sysv4 | sysv4.2uw2* | sysv4.3*)
-      lt_prog_compiler_wl='-Wl,'
-      lt_prog_compiler_pic='-KPIC'
-      lt_prog_compiler_static='-Bstatic'
-      ;;
-
-    sysv4*MP*)
-      if test -d /usr/nec ;then
-	lt_prog_compiler_pic='-Kconform_pic'
-	lt_prog_compiler_static='-Bstatic'
-      fi
-      ;;
-
-    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
-      lt_prog_compiler_wl='-Wl,'
-      lt_prog_compiler_pic='-KPIC'
-      lt_prog_compiler_static='-Bstatic'
-      ;;
-
-    unicos*)
-      lt_prog_compiler_wl='-Wl,'
-      lt_prog_compiler_can_build_shared=no
-      ;;
-
-    uts4*)
-      lt_prog_compiler_pic='-pic'
-      lt_prog_compiler_static='-Bstatic'
-      ;;
-
-    *)
-      lt_prog_compiler_can_build_shared=no
-      ;;
-    esac
-  fi
-
-case $host_os in
-  # For platforms which do not support PIC, -DPIC is meaningless:
-  *djgpp*)
-    lt_prog_compiler_pic=
-    ;;
-  *)
-    lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
-    ;;
-esac
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
-$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
-if ${lt_cv_prog_compiler_pic+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_prog_compiler_pic=$lt_prog_compiler_pic
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5
-$as_echo "$lt_cv_prog_compiler_pic" >&6; }
-lt_prog_compiler_pic=$lt_cv_prog_compiler_pic
-
-#
-# Check to make sure the PIC flag actually works.
-#
-if test -n "$lt_prog_compiler_pic"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
-$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; }
-if ${lt_cv_prog_compiler_pic_works+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_prog_compiler_pic_works=no
-   ac_outfile=conftest.$ac_objext
-   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-   lt_compiler_flag="$lt_prog_compiler_pic -DPIC"
-   # Insert the option either (1) after the last *FLAGS variable, or
-   # (2) before a word containing "conftest.", or (3) at the end.
-   # Note that $ac_compile itself does not contain backslashes and begins
-   # with a dollar sign (not a hyphen), so the echo should work correctly.
-   # The option is referenced via a variable to avoid confusing sed.
-   lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-   -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
-   (eval "$lt_compile" 2>conftest.err)
-   ac_status=$?
-   cat conftest.err >&5
-   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-   if (exit $ac_status) && test -s "$ac_outfile"; then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings other than the usual output.
-     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
-     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
-       lt_cv_prog_compiler_pic_works=yes
-     fi
-   fi
-   $RM conftest*
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5
-$as_echo "$lt_cv_prog_compiler_pic_works" >&6; }
-
-if test x"$lt_cv_prog_compiler_pic_works" = xyes; then
-    case $lt_prog_compiler_pic in
-     "" | " "*) ;;
-     *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;;
-     esac
-else
-    lt_prog_compiler_pic=
-     lt_prog_compiler_can_build_shared=no
-fi
-
-fi
-
-
-
-
-
-
-
-
-
-
-
-#
-# Check to make sure the static flag actually works.
-#
-wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\"
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5
-$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
-if ${lt_cv_prog_compiler_static_works+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_prog_compiler_static_works=no
-   save_LDFLAGS="$LDFLAGS"
-   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
-   echo "$lt_simple_link_test_code" > conftest.$ac_ext
-   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
-     # The linker can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     if test -s conftest.err; then
-       # Append any errors to the config.log.
-       cat conftest.err 1>&5
-       $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
-       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-       if diff conftest.exp conftest.er2 >/dev/null; then
-         lt_cv_prog_compiler_static_works=yes
-       fi
-     else
-       lt_cv_prog_compiler_static_works=yes
-     fi
-   fi
-   $RM -r conftest*
-   LDFLAGS="$save_LDFLAGS"
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5
-$as_echo "$lt_cv_prog_compiler_static_works" >&6; }
-
-if test x"$lt_cv_prog_compiler_static_works" = xyes; then
-    :
-else
-    lt_prog_compiler_static=
-fi
-
-
-
-
-
-
-
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
-$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
-if ${lt_cv_prog_compiler_c_o+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_prog_compiler_c_o=no
-   $RM -r conftest 2>/dev/null
-   mkdir conftest
-   cd conftest
-   mkdir out
-   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-
-   lt_compiler_flag="-o out/conftest2.$ac_objext"
-   # Insert the option either (1) after the last *FLAGS variable, or
-   # (2) before a word containing "conftest.", or (3) at the end.
-   # Note that $ac_compile itself does not contain backslashes and begins
-   # with a dollar sign (not a hyphen), so the echo should work correctly.
-   lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-   -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
-   (eval "$lt_compile" 2>out/conftest.err)
-   ac_status=$?
-   cat out/conftest.err >&5
-   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-   if (exit $ac_status) && test -s out/conftest2.$ac_objext
-   then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
-     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
-     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
-       lt_cv_prog_compiler_c_o=yes
-     fi
-   fi
-   chmod u+w . 2>&5
-   $RM conftest*
-   # SGI C++ compiler will create directory out/ii_files/ for
-   # template instantiation
-   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
-   $RM out/* && rmdir out
-   cd ..
-   $RM -r conftest
-   $RM conftest*
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
-$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
-
-
-
-
-
-
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
-$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
-if ${lt_cv_prog_compiler_c_o+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_prog_compiler_c_o=no
-   $RM -r conftest 2>/dev/null
-   mkdir conftest
-   cd conftest
-   mkdir out
-   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-
-   lt_compiler_flag="-o out/conftest2.$ac_objext"
-   # Insert the option either (1) after the last *FLAGS variable, or
-   # (2) before a word containing "conftest.", or (3) at the end.
-   # Note that $ac_compile itself does not contain backslashes and begins
-   # with a dollar sign (not a hyphen), so the echo should work correctly.
-   lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-   -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
-   (eval "$lt_compile" 2>out/conftest.err)
-   ac_status=$?
-   cat out/conftest.err >&5
-   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-   if (exit $ac_status) && test -s out/conftest2.$ac_objext
-   then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
-     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
-     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
-       lt_cv_prog_compiler_c_o=yes
-     fi
-   fi
-   chmod u+w . 2>&5
-   $RM conftest*
-   # SGI C++ compiler will create directory out/ii_files/ for
-   # template instantiation
-   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
-   $RM out/* && rmdir out
-   cd ..
-   $RM -r conftest
-   $RM conftest*
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
-$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
-
-
-
-
-hard_links="nottested"
-if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then
-  # do not overwrite the value of need_locks provided by the user
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5
-$as_echo_n "checking if we can lock with hard links... " >&6; }
-  hard_links=yes
-  $RM conftest*
-  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  touch conftest.a
-  ln conftest.a conftest.b 2>&5 || hard_links=no
-  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5
-$as_echo "$hard_links" >&6; }
-  if test "$hard_links" = no; then
-    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
-$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
-    need_locks=warn
-  fi
-else
-  need_locks=no
-fi
-
-
-
-
-
-
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5
-$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
-
-  runpath_var=
-  allow_undefined_flag=
-  always_export_symbols=no
-  archive_cmds=
-  archive_expsym_cmds=
-  compiler_needs_object=no
-  enable_shared_with_static_runtimes=no
-  export_dynamic_flag_spec=
-  export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-  hardcode_automatic=no
-  hardcode_direct=no
-  hardcode_direct_absolute=no
-  hardcode_libdir_flag_spec=
-  hardcode_libdir_separator=
-  hardcode_minus_L=no
-  hardcode_shlibpath_var=unsupported
-  inherit_rpath=no
-  link_all_deplibs=unknown
-  module_cmds=
-  module_expsym_cmds=
-  old_archive_from_new_cmds=
-  old_archive_from_expsyms_cmds=
-  thread_safe_flag_spec=
-  whole_archive_flag_spec=
-  # include_expsyms should be a list of space-separated symbols to be *always*
-  # included in the symbol list
-  include_expsyms=
-  # exclude_expsyms can be an extended regexp of symbols to exclude
-  # it will be wrapped by ` (' and `)$', so one must not match beginning or
-  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
-  # as well as any symbol that contains `d'.
-  exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
-  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
-  # platforms (ab)use it in PIC code, but their linkers get confused if
-  # the symbol is explicitly referenced.  Since portable code cannot
-  # rely on this symbol name, it's probably fine to never include it in
-  # preloaded symbol tables.
-  # Exclude shared library initialization/finalization symbols.
-  extract_expsyms_cmds=
-
-  case $host_os in
-  cygwin* | mingw* | pw32* | cegcc*)
-    # FIXME: the MSVC++ port hasn't been tested in a loooong time
-    # When not using gcc, we currently assume that we are using
-    # Microsoft Visual C++.
-    if test "$GCC" != yes; then
-      with_gnu_ld=no
-    fi
-    ;;
-  interix*)
-    # we just hope/assume this is gcc and not c89 (= MSVC++)
-    with_gnu_ld=yes
-    ;;
-  openbsd*)
-    with_gnu_ld=no
-    ;;
-  esac
-
-  ld_shlibs=yes
-
-  # On some targets, GNU ld is compatible enough with the native linker
-  # that we're better off using the native interface for both.
-  lt_use_gnu_ld_interface=no
-  if test "$with_gnu_ld" = yes; then
-    case $host_os in
-      aix*)
-	# The AIX port of GNU ld has always aspired to compatibility
-	# with the native linker.  However, as the warning in the GNU ld
-	# block says, versions before 2.19.5* couldn't really create working
-	# shared libraries, regardless of the interface used.
-	case `$LD -v 2>&1` in
-	  *\ \(GNU\ Binutils\)\ 2.19.5*) ;;
-	  *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;;
-	  *\ \(GNU\ Binutils\)\ [3-9]*) ;;
-	  *)
-	    lt_use_gnu_ld_interface=yes
-	    ;;
-	esac
-	;;
-      *)
-	lt_use_gnu_ld_interface=yes
-	;;
-    esac
-  fi
-
-  if test "$lt_use_gnu_ld_interface" = yes; then
-    # If archive_cmds runs LD, not CC, wlarc should be empty
-    wlarc='${wl}'
-
-    # Set some defaults for GNU ld with shared library support. These
-    # are reset later if shared libraries are not supported. Putting them
-    # here allows them to be overridden if necessary.
-    runpath_var=LD_RUN_PATH
-    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-    export_dynamic_flag_spec='${wl}--export-dynamic'
-    # ancient GNU ld didn't support --whole-archive et. al.
-    if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
-      whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-    else
-      whole_archive_flag_spec=
-    fi
-    supports_anon_versioning=no
-    case `$LD -v 2>&1` in
-      *GNU\ gold*) supports_anon_versioning=yes ;;
-      *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
-      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
-      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
-      *\ 2.11.*) ;; # other 2.11 versions
-      *) supports_anon_versioning=yes ;;
-    esac
-
-    # See if GNU ld supports shared libraries.
-    case $host_os in
-    aix[3-9]*)
-      # On AIX/PPC, the GNU linker is very broken
-      if test "$host_cpu" != ia64; then
-	ld_shlibs=no
-	cat <<_LT_EOF 1>&2
-
-*** Warning: the GNU linker, at least up to release 2.19, is reported
-*** to be unable to reliably create shared libraries on AIX.
-*** Therefore, libtool is disabling shared libraries support.  If you
-*** really care for shared libraries, you may want to install binutils
-*** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
-*** You will then need to restart the configuration process.
-
-_LT_EOF
-      fi
-      ;;
-
-    amigaos*)
-      case $host_cpu in
-      powerpc)
-            # see comment about AmigaOS4 .so support
-            archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-            archive_expsym_cmds=''
-        ;;
-      m68k)
-            archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-            hardcode_libdir_flag_spec='-L$libdir'
-            hardcode_minus_L=yes
-        ;;
-      esac
-      ;;
-
-    beos*)
-      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-	allow_undefined_flag=unsupported
-	# Joseph Beckenbach <jrb3 at best.com> says some releases of gcc
-	# support --undefined.  This deserves some investigation.  FIXME
-	archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-      else
-	ld_shlibs=no
-      fi
-      ;;
-
-    cygwin* | mingw* | pw32* | cegcc*)
-      # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
-      # as there is no search path for DLLs.
-      hardcode_libdir_flag_spec='-L$libdir'
-      export_dynamic_flag_spec='${wl}--export-all-symbols'
-      allow_undefined_flag=unsupported
-      always_export_symbols=no
-      enable_shared_with_static_runtimes=yes
-      export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols'
-      exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'
-
-      if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
-        archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-	# If the export-symbols file already is a .def file (1st line
-	# is EXPORTS), use it as is; otherwise, prepend...
-	archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-	  cp $export_symbols $output_objdir/$soname.def;
-	else
-	  echo EXPORTS > $output_objdir/$soname.def;
-	  cat $export_symbols >> $output_objdir/$soname.def;
-	fi~
-	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-      else
-	ld_shlibs=no
-      fi
-      ;;
-
-    haiku*)
-      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-      link_all_deplibs=yes
-      ;;
-
-    interix[3-9]*)
-      hardcode_direct=no
-      hardcode_shlibpath_var=no
-      hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-      export_dynamic_flag_spec='${wl}-E'
-      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
-      # Instead, shared libraries are loaded at an image base (0x10000000 by
-      # default) and relocated if they conflict, which is a slow very memory
-      # consuming and fragmenting process.  To avoid this, we pick a random,
-      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
-      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
-      archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-      archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-      ;;
-
-    gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
-      tmp_diet=no
-      if test "$host_os" = linux-dietlibc; then
-	case $cc_basename in
-	  diet\ *) tmp_diet=yes;;	# linux-dietlibc with static linking (!diet-dyn)
-	esac
-      fi
-      if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
-	 && test "$tmp_diet" = no
-      then
-	tmp_addflag=' $pic_flag'
-	tmp_sharedflag='-shared'
-	case $cc_basename,$host_cpu in
-        pgcc*)				# Portland Group C compiler
-	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
-	  tmp_addflag=' $pic_flag'
-	  ;;
-	pgf77* | pgf90* | pgf95* | pgfortran*)
-					# Portland Group f77 and f90 compilers
-	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
-	  tmp_addflag=' $pic_flag -Mnomain' ;;
-	ecc*,ia64* | icc*,ia64*)	# Intel C compiler on ia64
-	  tmp_addflag=' -i_dynamic' ;;
-	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
-	  tmp_addflag=' -i_dynamic -nofor_main' ;;
-	ifc* | ifort*)			# Intel Fortran compiler
-	  tmp_addflag=' -nofor_main' ;;
-	lf95*)				# Lahey Fortran 8.1
-	  whole_archive_flag_spec=
-	  tmp_sharedflag='--shared' ;;
-	xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below)
-	  tmp_sharedflag='-qmkshrobj'
-	  tmp_addflag= ;;
-	nvcc*)	# Cuda Compiler Driver 2.2
-	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
-	  compiler_needs_object=yes
-	  ;;
-	esac
-	case `$CC -V 2>&1 | sed 5q` in
-	*Sun\ C*)			# Sun C 5.9
-	  whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
-	  compiler_needs_object=yes
-	  tmp_sharedflag='-G' ;;
-	*Sun\ F*)			# Sun Fortran 8.3
-	  tmp_sharedflag='-G' ;;
-	esac
-	archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-
-        if test "x$supports_anon_versioning" = xyes; then
-          archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
-	    cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-	    echo "local: *; };" >> $output_objdir/$libname.ver~
-	    $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
-        fi
-
-	case $cc_basename in
-	xlf* | bgf* | bgxlf* | mpixlf*)
-	  # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
-	  whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive'
-	  hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-	  archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
-	  if test "x$supports_anon_versioning" = xyes; then
-	    archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
-	      cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-	      echo "local: *; };" >> $output_objdir/$libname.ver~
-	      $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
-	  fi
-	  ;;
-	esac
-      else
-        ld_shlibs=no
-      fi
-      ;;
-
-    netbsd*)
-      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
-	archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
-	wlarc=
-      else
-	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      fi
-      ;;
-
-    solaris*)
-      if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
-	ld_shlibs=no
-	cat <<_LT_EOF 1>&2
-
-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
-*** create shared libraries on Solaris systems.  Therefore, libtool
-*** is disabling shared libraries support.  We urge you to upgrade GNU
-*** binutils to release 2.9.1 or newer.  Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
-
-_LT_EOF
-      elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      else
-	ld_shlibs=no
-      fi
-      ;;
-
-    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
-      case `$LD -v 2>&1` in
-        *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
-	ld_shlibs=no
-	cat <<_LT_EOF 1>&2
-
-*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
-*** reliably create shared libraries on SCO systems.  Therefore, libtool
-*** is disabling shared libraries support.  We urge you to upgrade GNU
-*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
-
-_LT_EOF
-	;;
-	*)
-	  # For security reasons, it is highly recommended that you always
-	  # use absolute paths for naming shared libraries, and exclude the
-	  # DT_RUNPATH tag from executables and libraries.  But doing so
-	  # requires that you compile everything twice, which is a pain.
-	  if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-	    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-	    archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	    archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-	  else
-	    ld_shlibs=no
-	  fi
-	;;
-      esac
-      ;;
-
-    sunos4*)
-      archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-      wlarc=
-      hardcode_direct=yes
-      hardcode_shlibpath_var=no
-      ;;
-
-    *)
-      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      else
-	ld_shlibs=no
-      fi
-      ;;
-    esac
-
-    if test "$ld_shlibs" = no; then
-      runpath_var=
-      hardcode_libdir_flag_spec=
-      export_dynamic_flag_spec=
-      whole_archive_flag_spec=
-    fi
-  else
-    # PORTME fill in a description of your system's linker (not GNU ld)
-    case $host_os in
-    aix3*)
-      allow_undefined_flag=unsupported
-      always_export_symbols=yes
-      archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
-      # Note: this linker hardcodes the directories in LIBPATH if there
-      # are no directories specified by -L.
-      hardcode_minus_L=yes
-      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
-	# Neither direct hardcoding nor static linking is supported with a
-	# broken collect2.
-	hardcode_direct=unsupported
-      fi
-      ;;
-
-    aix[4-9]*)
-      if test "$host_cpu" = ia64; then
-	# On IA64, the linker does run time linking by default, so we don't
-	# have to do anything special.
-	aix_use_runtimelinking=no
-	exp_sym_flag='-Bexport'
-	no_entry_flag=""
-      else
-	# If we're using GNU nm, then we don't want the "-C" option.
-	# -C means demangle to AIX nm, but means don't demangle with GNU nm
-	# Also, AIX nm treats weak defined symbols like other global
-	# defined symbols, whereas GNU nm marks them as "W".
-	if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
-	  export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
-	else
-	  export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
-	fi
-	aix_use_runtimelinking=no
-
-	# Test if we are trying to use run time linking or normal
-	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
-	# need to do runtime linking.
-	case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
-	  for ld_flag in $LDFLAGS; do
-	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
-	    aix_use_runtimelinking=yes
-	    break
-	  fi
-	  done
-	  ;;
-	esac
-
-	exp_sym_flag='-bexport'
-	no_entry_flag='-bnoentry'
-      fi
-
-      # When large executables or shared objects are built, AIX ld can
-      # have problems creating the table of contents.  If linking a library
-      # or program results in "error TOC overflow" add -mminimal-toc to
-      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
-      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-
-      archive_cmds=''
-      hardcode_direct=yes
-      hardcode_direct_absolute=yes
-      hardcode_libdir_separator=':'
-      link_all_deplibs=yes
-      file_list_spec='${wl}-f,'
-
-      if test "$GCC" = yes; then
-	case $host_os in aix4.[012]|aix4.[012].*)
-	# We only want to do this on AIX 4.2 and lower, the check
-	# below for broken collect2 doesn't work under 4.3+
-	  collect2name=`${CC} -print-prog-name=collect2`
-	  if test -f "$collect2name" &&
-	   strings "$collect2name" | $GREP resolve_lib_name >/dev/null
-	  then
-	  # We have reworked collect2
-	  :
-	  else
-	  # We have old collect2
-	  hardcode_direct=unsupported
-	  # It fails to find uninstalled libraries when the uninstalled
-	  # path is not listed in the libpath.  Setting hardcode_minus_L
-	  # to unsupported forces relinking
-	  hardcode_minus_L=yes
-	  hardcode_libdir_flag_spec='-L$libdir'
-	  hardcode_libdir_separator=
-	  fi
-	  ;;
-	esac
-	shared_flag='-shared'
-	if test "$aix_use_runtimelinking" = yes; then
-	  shared_flag="$shared_flag "'${wl}-G'
-	fi
-      else
-	# not using gcc
-	if test "$host_cpu" = ia64; then
-	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-	# chokes on -Wl,-G. The following line is correct:
-	  shared_flag='-G'
-	else
-	  if test "$aix_use_runtimelinking" = yes; then
-	    shared_flag='${wl}-G'
-	  else
-	    shared_flag='${wl}-bM:SRE'
-	  fi
-	fi
-      fi
-
-      export_dynamic_flag_spec='${wl}-bexpall'
-      # It seems that -bexpall does not export symbols beginning with
-      # underscore (_), so it is better to generate a list of symbols to export.
-      always_export_symbols=yes
-      if test "$aix_use_runtimelinking" = yes; then
-	# Warning - without using the other runtime loading flags (-brtl),
-	# -berok will link without error, but may produce a broken library.
-	allow_undefined_flag='-berok'
-        # Determine the default libpath from the value encoded in an
-        # empty executable.
-        if test "${lt_cv_aix_libpath+set}" = set; then
-  aix_libpath=$lt_cv_aix_libpath
-else
-  if ${lt_cv_aix_libpath_+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-
-  lt_aix_libpath_sed='
-      /Import File Strings/,/^$/ {
-	  /^0/ {
-	      s/^0  *\([^ ]*\) *$/\1/
-	      p
-	  }
-      }'
-  lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-  # Check for a 64-bit object if we didn't find anything.
-  if test -z "$lt_cv_aix_libpath_"; then
-    lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-  fi
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-  if test -z "$lt_cv_aix_libpath_"; then
-    lt_cv_aix_libpath_="/usr/lib:/lib"
-  fi
-
-fi
-
-  aix_libpath=$lt_cv_aix_libpath_
-fi
-
-        hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
-        archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-      else
-	if test "$host_cpu" = ia64; then
-	  hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
-	  allow_undefined_flag="-z nodefs"
-	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
-	else
-	 # Determine the default libpath from the value encoded in an
-	 # empty executable.
-	 if test "${lt_cv_aix_libpath+set}" = set; then
-  aix_libpath=$lt_cv_aix_libpath
-else
-  if ${lt_cv_aix_libpath_+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-
-  lt_aix_libpath_sed='
-      /Import File Strings/,/^$/ {
-	  /^0/ {
-	      s/^0  *\([^ ]*\) *$/\1/
-	      p
-	  }
-      }'
-  lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-  # Check for a 64-bit object if we didn't find anything.
-  if test -z "$lt_cv_aix_libpath_"; then
-    lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-  fi
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-  if test -z "$lt_cv_aix_libpath_"; then
-    lt_cv_aix_libpath_="/usr/lib:/lib"
-  fi
-
-fi
-
-  aix_libpath=$lt_cv_aix_libpath_
-fi
-
-	 hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
-	  # Warning - without using the other run time loading flags,
-	  # -berok will link without error, but may produce a broken library.
-	  no_undefined_flag=' ${wl}-bernotok'
-	  allow_undefined_flag=' ${wl}-berok'
-	  if test "$with_gnu_ld" = yes; then
-	    # We only use this code for GNU lds that support --whole-archive.
-	    whole_archive_flag_spec='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
-	  else
-	    # Exported symbols can be pulled into shared objects from archives
-	    whole_archive_flag_spec='$convenience'
-	  fi
-	  archive_cmds_need_lc=yes
-	  # This is similar to how AIX traditionally builds its shared libraries.
-	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-	fi
-      fi
-      ;;
-
-    amigaos*)
-      case $host_cpu in
-      powerpc)
-            # see comment about AmigaOS4 .so support
-            archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-            archive_expsym_cmds=''
-        ;;
-      m68k)
-            archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-            hardcode_libdir_flag_spec='-L$libdir'
-            hardcode_minus_L=yes
-        ;;
-      esac
-      ;;
-
-    bsdi[45]*)
-      export_dynamic_flag_spec=-rdynamic
-      ;;
-
-    cygwin* | mingw* | pw32* | cegcc*)
-      # When not using gcc, we currently assume that we are using
-      # Microsoft Visual C++.
-      # hardcode_libdir_flag_spec is actually meaningless, as there is
-      # no search path for DLLs.
-      case $cc_basename in
-      cl*)
-	# Native MSVC
-	hardcode_libdir_flag_spec=' '
-	allow_undefined_flag=unsupported
-	always_export_symbols=yes
-	file_list_spec='@'
-	# Tell ltmain to make .lib files, not .a files.
-	libext=lib
-	# Tell ltmain to make .dll files, not .so files.
-	shrext_cmds=".dll"
-	# FIXME: Setting linknames here is a bad hack.
-	archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
-	archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-	    sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
-	  else
-	    sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
-	  fi~
-	  $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
-	  linknames='
-	# The linker will not automatically build a static lib if we build a DLL.
-	# _LT_TAGVAR(old_archive_from_new_cmds, )='true'
-	enable_shared_with_static_runtimes=yes
-	exclude_expsyms='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
-	export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
-	# Don't use ranlib
-	old_postinstall_cmds='chmod 644 $oldlib'
-	postlink_cmds='lt_outputfile="@OUTPUT@"~
-	  lt_tool_outputfile="@TOOL_OUTPUT@"~
-	  case $lt_outputfile in
-	    *.exe|*.EXE) ;;
-	    *)
-	      lt_outputfile="$lt_outputfile.exe"
-	      lt_tool_outputfile="$lt_tool_outputfile.exe"
-	      ;;
-	  esac~
-	  if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
-	    $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
-	    $RM "$lt_outputfile.manifest";
-	  fi'
-	;;
-      *)
-	# Assume MSVC wrapper
-	hardcode_libdir_flag_spec=' '
-	allow_undefined_flag=unsupported
-	# Tell ltmain to make .lib files, not .a files.
-	libext=lib
-	# Tell ltmain to make .dll files, not .so files.
-	shrext_cmds=".dll"
-	# FIXME: Setting linknames here is a bad hack.
-	archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
-	# The linker will automatically build a .lib file if we build a DLL.
-	old_archive_from_new_cmds='true'
-	# FIXME: Should let the user specify the lib program.
-	old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
-	enable_shared_with_static_runtimes=yes
-	;;
-      esac
-      ;;
-
-    darwin* | rhapsody*)
-
-
-  archive_cmds_need_lc=no
-  hardcode_direct=no
-  hardcode_automatic=yes
-  hardcode_shlibpath_var=unsupported
-  if test "$lt_cv_ld_force_load" = "yes"; then
-    whole_archive_flag_spec='`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
-
-  else
-    whole_archive_flag_spec=''
-  fi
-  link_all_deplibs=yes
-  allow_undefined_flag="$_lt_dar_allow_undefined"
-  case $cc_basename in
-     ifort*) _lt_dar_can_shared=yes ;;
-     *) _lt_dar_can_shared=$GCC ;;
-  esac
-  if test "$_lt_dar_can_shared" = "yes"; then
-    output_verbose_link_cmd=func_echo_all
-    archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
-    module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
-    archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
-    module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
-
-  else
-  ld_shlibs=no
-  fi
-
-      ;;
-
-    dgux*)
-      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_libdir_flag_spec='-L$libdir'
-      hardcode_shlibpath_var=no
-      ;;
-
-    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
-    # support.  Future versions do this automatically, but an explicit c++rt0.o
-    # does not break anything, and helps significantly (at the cost of a little
-    # extra space).
-    freebsd2.2*)
-      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
-      hardcode_libdir_flag_spec='-R$libdir'
-      hardcode_direct=yes
-      hardcode_shlibpath_var=no
-      ;;
-
-    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
-    freebsd2.*)
-      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_direct=yes
-      hardcode_minus_L=yes
-      hardcode_shlibpath_var=no
-      ;;
-
-    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-    freebsd* | dragonfly*)
-      archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-      hardcode_libdir_flag_spec='-R$libdir'
-      hardcode_direct=yes
-      hardcode_shlibpath_var=no
-      ;;
-
-    hpux9*)
-      if test "$GCC" = yes; then
-	archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-      else
-	archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-      fi
-      hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
-      hardcode_libdir_separator=:
-      hardcode_direct=yes
-
-      # hardcode_minus_L: Not really in the search PATH,
-      # but as the default location of the library.
-      hardcode_minus_L=yes
-      export_dynamic_flag_spec='${wl}-E'
-      ;;
-
-    hpux10*)
-      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
-	archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
-      fi
-      if test "$with_gnu_ld" = no; then
-	hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
-	hardcode_libdir_separator=:
-	hardcode_direct=yes
-	hardcode_direct_absolute=yes
-	export_dynamic_flag_spec='${wl}-E'
-	# hardcode_minus_L: Not really in the search PATH,
-	# but as the default location of the library.
-	hardcode_minus_L=yes
-      fi
-      ;;
-
-    hpux11*)
-      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
-	case $host_cpu in
-	hppa*64*)
-	  archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	ia64*)
-	  archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	*)
-	  archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	esac
-      else
-	case $host_cpu in
-	hppa*64*)
-	  archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	ia64*)
-	  archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	*)
-
-	  # Older versions of the 11.00 compiler do not understand -b yet
-	  # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
-	  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC understands -b" >&5
-$as_echo_n "checking if $CC understands -b... " >&6; }
-if ${lt_cv_prog_compiler__b+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_prog_compiler__b=no
-   save_LDFLAGS="$LDFLAGS"
-   LDFLAGS="$LDFLAGS -b"
-   echo "$lt_simple_link_test_code" > conftest.$ac_ext
-   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
-     # The linker can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     if test -s conftest.err; then
-       # Append any errors to the config.log.
-       cat conftest.err 1>&5
-       $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
-       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-       if diff conftest.exp conftest.er2 >/dev/null; then
-         lt_cv_prog_compiler__b=yes
-       fi
-     else
-       lt_cv_prog_compiler__b=yes
-     fi
-   fi
-   $RM -r conftest*
-   LDFLAGS="$save_LDFLAGS"
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5
-$as_echo "$lt_cv_prog_compiler__b" >&6; }
-
-if test x"$lt_cv_prog_compiler__b" = xyes; then
-    archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-else
-    archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
-fi
-
-	  ;;
-	esac
-      fi
-      if test "$with_gnu_ld" = no; then
-	hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
-	hardcode_libdir_separator=:
-
-	case $host_cpu in
-	hppa*64*|ia64*)
-	  hardcode_direct=no
-	  hardcode_shlibpath_var=no
-	  ;;
-	*)
-	  hardcode_direct=yes
-	  hardcode_direct_absolute=yes
-	  export_dynamic_flag_spec='${wl}-E'
-
-	  # hardcode_minus_L: Not really in the search PATH,
-	  # but as the default location of the library.
-	  hardcode_minus_L=yes
-	  ;;
-	esac
-      fi
-      ;;
-
-    irix5* | irix6* | nonstopux*)
-      if test "$GCC" = yes; then
-	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-	# Try to use the -exported_symbol ld option, if it does not
-	# work, assume that -exports_file does not work either and
-	# implicitly export all symbols.
-	# This should be the same for all languages, so no per-tag cache variable.
-	{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5
-$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; }
-if ${lt_cv_irix_exported_symbol+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  save_LDFLAGS="$LDFLAGS"
-	   LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
-	   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-int foo (void) { return 0; }
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-  lt_cv_irix_exported_symbol=yes
-else
-  lt_cv_irix_exported_symbol=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-           LDFLAGS="$save_LDFLAGS"
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5
-$as_echo "$lt_cv_irix_exported_symbol" >&6; }
-	if test "$lt_cv_irix_exported_symbol" = yes; then
-          archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
-	fi
-      else
-	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
-	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
-      fi
-      archive_cmds_need_lc='no'
-      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-      hardcode_libdir_separator=:
-      inherit_rpath=yes
-      link_all_deplibs=yes
-      ;;
-
-    netbsd*)
-      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
-	archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
-      else
-	archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
-      fi
-      hardcode_libdir_flag_spec='-R$libdir'
-      hardcode_direct=yes
-      hardcode_shlibpath_var=no
-      ;;
-
-    newsos6)
-      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_direct=yes
-      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-      hardcode_libdir_separator=:
-      hardcode_shlibpath_var=no
-      ;;
-
-    *nto* | *qnx*)
-      ;;
-
-    openbsd*)
-      if test -f /usr/libexec/ld.so; then
-	hardcode_direct=yes
-	hardcode_shlibpath_var=no
-	hardcode_direct_absolute=yes
-	if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-	  archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	  archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
-	  hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-	  export_dynamic_flag_spec='${wl}-E'
-	else
-	  case $host_os in
-	   openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
-	     archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-	     hardcode_libdir_flag_spec='-R$libdir'
-	     ;;
-	   *)
-	     archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	     hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-	     ;;
-	  esac
-	fi
-      else
-	ld_shlibs=no
-      fi
-      ;;
-
-    os2*)
-      hardcode_libdir_flag_spec='-L$libdir'
-      hardcode_minus_L=yes
-      allow_undefined_flag=unsupported
-      archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
-      old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
-      ;;
-
-    osf3*)
-      if test "$GCC" = yes; then
-	allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
-	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-      else
-	allow_undefined_flag=' -expect_unresolved \*'
-	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
-      fi
-      archive_cmds_need_lc='no'
-      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-      hardcode_libdir_separator=:
-      ;;
-
-    osf4* | osf5*)	# as osf3* with the addition of -msym flag
-      if test "$GCC" = yes; then
-	allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
-	archive_cmds='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-	hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-      else
-	allow_undefined_flag=' -expect_unresolved \*'
-	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
-	archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
-	$CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
-
-	# Both c and cxx compiler support -rpath directly
-	hardcode_libdir_flag_spec='-rpath $libdir'
-      fi
-      archive_cmds_need_lc='no'
-      hardcode_libdir_separator=:
-      ;;
-
-    solaris*)
-      no_undefined_flag=' -z defs'
-      if test "$GCC" = yes; then
-	wlarc='${wl}'
-	archive_cmds='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-	  $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
-      else
-	case `$CC -V 2>&1` in
-	*"Compilers 5.0"*)
-	  wlarc=''
-	  archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	  archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-	  $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
-	  ;;
-	*)
-	  wlarc='${wl}'
-	  archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
-	  archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-	  $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
-	  ;;
-	esac
-      fi
-      hardcode_libdir_flag_spec='-R$libdir'
-      hardcode_shlibpath_var=no
-      case $host_os in
-      solaris2.[0-5] | solaris2.[0-5].*) ;;
-      *)
-	# The compiler driver will combine and reorder linker options,
-	# but understands `-z linker_flag'.  GCC discards it without `$wl',
-	# but is careful enough not to reorder.
-	# Supported since Solaris 2.6 (maybe 2.5.1?)
-	if test "$GCC" = yes; then
-	  whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
-	else
-	  whole_archive_flag_spec='-z allextract$convenience -z defaultextract'
-	fi
-	;;
-      esac
-      link_all_deplibs=yes
-      ;;
-
-    sunos4*)
-      if test "x$host_vendor" = xsequent; then
-	# Use $CC to link under sequent, because it throws in some extra .o
-	# files that make .init and .fini sections work.
-	archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
-      fi
-      hardcode_libdir_flag_spec='-L$libdir'
-      hardcode_direct=yes
-      hardcode_minus_L=yes
-      hardcode_shlibpath_var=no
-      ;;
-
-    sysv4)
-      case $host_vendor in
-	sni)
-	  archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	  hardcode_direct=yes # is this really true???
-	;;
-	siemens)
-	  ## LD is ld it makes a PLAMLIB
-	  ## CC just makes a GrossModule.
-	  archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-	  reload_cmds='$CC -r -o $output$reload_objs'
-	  hardcode_direct=no
-        ;;
-	motorola)
-	  archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	  hardcode_direct=no #Motorola manual says yes, but my tests say they lie
-	;;
-      esac
-      runpath_var='LD_RUN_PATH'
-      hardcode_shlibpath_var=no
-      ;;
-
-    sysv4.3*)
-      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_shlibpath_var=no
-      export_dynamic_flag_spec='-Bexport'
-      ;;
-
-    sysv4*MP*)
-      if test -d /usr/nec; then
-	archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	hardcode_shlibpath_var=no
-	runpath_var=LD_RUN_PATH
-	hardcode_runpath_var=yes
-	ld_shlibs=yes
-      fi
-      ;;
-
-    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
-      no_undefined_flag='${wl}-z,text'
-      archive_cmds_need_lc=no
-      hardcode_shlibpath_var=no
-      runpath_var='LD_RUN_PATH'
-
-      if test "$GCC" = yes; then
-	archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-      fi
-      ;;
-
-    sysv5* | sco3.2v5* | sco5v6*)
-      # Note: We can NOT use -z defs as we might desire, because we do not
-      # link with -lc, and that would cause any symbols used from libc to
-      # always be unresolved, which means just about no library would
-      # ever link correctly.  If we're not using GNU ld we use -z text
-      # though, which does catch some bad symbols but isn't as heavy-handed
-      # as -z defs.
-      no_undefined_flag='${wl}-z,text'
-      allow_undefined_flag='${wl}-z,nodefs'
-      archive_cmds_need_lc=no
-      hardcode_shlibpath_var=no
-      hardcode_libdir_flag_spec='${wl}-R,$libdir'
-      hardcode_libdir_separator=':'
-      link_all_deplibs=yes
-      export_dynamic_flag_spec='${wl}-Bexport'
-      runpath_var='LD_RUN_PATH'
-
-      if test "$GCC" = yes; then
-	archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-      fi
-      ;;
-
-    uts4*)
-      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_libdir_flag_spec='-L$libdir'
-      hardcode_shlibpath_var=no
-      ;;
-
-    *)
-      ld_shlibs=no
-      ;;
-    esac
-
-    if test x$host_vendor = xsni; then
-      case $host in
-      sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-	export_dynamic_flag_spec='${wl}-Blargedynsym'
-	;;
-      esac
-    fi
-  fi
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5
-$as_echo "$ld_shlibs" >&6; }
-test "$ld_shlibs" = no && can_build_shared=no
-
-with_gnu_ld=$with_gnu_ld
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-#
-# Do we need to explicitly link libc?
-#
-case "x$archive_cmds_need_lc" in
-x|xyes)
-  # Assume -lc should be added
-  archive_cmds_need_lc=yes
-
-  if test "$enable_shared" = yes && test "$GCC" = yes; then
-    case $archive_cmds in
-    *'~'*)
-      # FIXME: we may have to deal with multi-command sequences.
-      ;;
-    '$CC '*)
-      # Test whether the compiler implicitly links with -lc since on some
-      # systems, -lgcc has to come before -lc. If gcc already passes -lc
-      # to ld, don't add -lc before -lgcc.
-      { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5
-$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
-if ${lt_cv_archive_cmds_need_lc+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  $RM conftest*
-	echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-
-	if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; } 2>conftest.err; then
-	  soname=conftest
-	  lib=conftest
-	  libobjs=conftest.$ac_objext
-	  deplibs=
-	  wl=$lt_prog_compiler_wl
-	  pic_flag=$lt_prog_compiler_pic
-	  compiler_flags=-v
-	  linker_flags=-v
-	  verstring=
-	  output_objdir=.
-	  libname=conftest
-	  lt_save_allow_undefined_flag=$allow_undefined_flag
-	  allow_undefined_flag=
-	  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5
-  (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }
-	  then
-	    lt_cv_archive_cmds_need_lc=no
-	  else
-	    lt_cv_archive_cmds_need_lc=yes
-	  fi
-	  allow_undefined_flag=$lt_save_allow_undefined_flag
-	else
-	  cat conftest.err 1>&5
-	fi
-	$RM conftest*
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc" >&5
-$as_echo "$lt_cv_archive_cmds_need_lc" >&6; }
-      archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc
-      ;;
-    esac
-  fi
-  ;;
-esac
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5
-$as_echo_n "checking dynamic linker characteristics... " >&6; }
-
-if test "$GCC" = yes; then
-  case $host_os in
-    darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
-    *) lt_awk_arg="/^libraries:/" ;;
-  esac
-  case $host_os in
-    mingw* | cegcc*) lt_sed_strip_eq="s,=\([A-Za-z]:\),\1,g" ;;
-    *) lt_sed_strip_eq="s,=/,/,g" ;;
-  esac
-  lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
-  case $lt_search_path_spec in
-  *\;*)
-    # if the path contains ";" then we assume it to be the separator
-    # otherwise default to the standard path separator (i.e. ":") - it is
-    # assumed that no part of a normal pathname contains ";" but that should
-    # okay in the real world where ";" in dirpaths is itself problematic.
-    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'`
-    ;;
-  *)
-    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"`
-    ;;
-  esac
-  # Ok, now we have the path, separated by spaces, we can step through it
-  # and add multilib dir if necessary.
-  lt_tmp_lt_search_path_spec=
-  lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
-  for lt_sys_path in $lt_search_path_spec; do
-    if test -d "$lt_sys_path/$lt_multi_os_dir"; then
-      lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
-    else
-      test -d "$lt_sys_path" && \
-	lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
-    fi
-  done
-  lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
-BEGIN {RS=" "; FS="/|\n";} {
-  lt_foo="";
-  lt_count=0;
-  for (lt_i = NF; lt_i > 0; lt_i--) {
-    if ($lt_i != "" && $lt_i != ".") {
-      if ($lt_i == "..") {
-        lt_count++;
-      } else {
-        if (lt_count == 0) {
-          lt_foo="/" $lt_i lt_foo;
-        } else {
-          lt_count--;
-        }
-      }
-    }
-  }
-  if (lt_foo != "") { lt_freq[lt_foo]++; }
-  if (lt_freq[lt_foo] == 1) { print lt_foo; }
-}'`
-  # AWK program above erroneously prepends '/' to C:/dos/paths
-  # for these hosts.
-  case $host_os in
-    mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
-      $SED 's,/\([A-Za-z]:\),\1,g'` ;;
-  esac
-  sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
-else
-  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
-fi
-library_names_spec=
-libname_spec='lib$name'
-soname_spec=
-shrext_cmds=".so"
-postinstall_cmds=
-postuninstall_cmds=
-finish_cmds=
-finish_eval=
-shlibpath_var=
-shlibpath_overrides_runpath=unknown
-version_type=none
-dynamic_linker="$host_os ld.so"
-sys_lib_dlsearch_path_spec="/lib /usr/lib"
-need_lib_prefix=unknown
-hardcode_into_libs=no
-
-# when you set need_version to no, make sure it does not cause -set_version
-# flags to be left without arguments
-need_version=unknown
-
-case $host_os in
-aix3*)
-  version_type=linux # correct to gnu/linux during the next big refactor
-  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
-  shlibpath_var=LIBPATH
-
-  # AIX 3 has no versioning support, so we append a major version to the name.
-  soname_spec='${libname}${release}${shared_ext}$major'
-  ;;
-
-aix[4-9]*)
-  version_type=linux # correct to gnu/linux during the next big refactor
-  need_lib_prefix=no
-  need_version=no
-  hardcode_into_libs=yes
-  if test "$host_cpu" = ia64; then
-    # AIX 5 supports IA64
-    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
-    shlibpath_var=LD_LIBRARY_PATH
-  else
-    # With GCC up to 2.95.x, collect2 would create an import file
-    # for dependence libraries.  The import file would start with
-    # the line `#! .'.  This would cause the generated library to
-    # depend on `.', always an invalid library.  This was fixed in
-    # development snapshots of GCC prior to 3.0.
-    case $host_os in
-      aix4 | aix4.[01] | aix4.[01].*)
-      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
-	   echo ' yes '
-	   echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
-	:
-      else
-	can_build_shared=no
-      fi
-      ;;
-    esac
-    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
-    # soname into executable. Probably we can add versioning support to
-    # collect2, so additional links can be useful in future.
-    if test "$aix_use_runtimelinking" = yes; then
-      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
-      # instead of lib<name>.a to let people know that these are not
-      # typical AIX shared libraries.
-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    else
-      # We preserve .a as extension for shared libraries through AIX4.2
-      # and later when we are not doing run time linking.
-      library_names_spec='${libname}${release}.a $libname.a'
-      soname_spec='${libname}${release}${shared_ext}$major'
-    fi
-    shlibpath_var=LIBPATH
-  fi
-  ;;
-
-amigaos*)
-  case $host_cpu in
-  powerpc)
-    # Since July 2007 AmigaOS4 officially supports .so libraries.
-    # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    ;;
-  m68k)
-    library_names_spec='$libname.ixlibrary $libname.a'
-    # Create ${libname}_ixlibrary.a entries in /sys/libs.
-    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
-    ;;
-  esac
-  ;;
-
-beos*)
-  library_names_spec='${libname}${shared_ext}'
-  dynamic_linker="$host_os ld.so"
-  shlibpath_var=LIBRARY_PATH
-  ;;
-
-bsdi[45]*)
-  version_type=linux # correct to gnu/linux during the next big refactor
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
-  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
-  # the default ld.so.conf also contains /usr/contrib/lib and
-  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
-  # libtool to hard-code these into programs
-  ;;
-
-cygwin* | mingw* | pw32* | cegcc*)
-  version_type=windows
-  shrext_cmds=".dll"
-  need_version=no
-  need_lib_prefix=no
-
-  case $GCC,$cc_basename in
-  yes,*)
-    # gcc
-    library_names_spec='$libname.dll.a'
-    # DLL is installed to $(libdir)/../bin by postinstall_cmds
-    postinstall_cmds='base_file=`basename \${file}`~
-      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
-      dldir=$destdir/`dirname \$dlpath`~
-      test -d \$dldir || mkdir -p \$dldir~
-      $install_prog $dir/$dlname \$dldir/$dlname~
-      chmod a+x \$dldir/$dlname~
-      if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
-        eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
-      fi'
-    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
-      dlpath=$dir/\$dldll~
-       $RM \$dlpath'
-    shlibpath_overrides_runpath=yes
-
-    case $host_os in
-    cygwin*)
-      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
-      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-
-      sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"
-      ;;
-    mingw* | cegcc*)
-      # MinGW DLLs use traditional 'lib' prefix
-      soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-      ;;
-    pw32*)
-      # pw32 DLLs use 'pw' prefix rather than 'lib'
-      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-      ;;
-    esac
-    dynamic_linker='Win32 ld.exe'
-    ;;
-
-  *,cl*)
-    # Native MSVC
-    libname_spec='$name'
-    soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-    library_names_spec='${libname}.dll.lib'
-
-    case $build_os in
-    mingw*)
-      sys_lib_search_path_spec=
-      lt_save_ifs=$IFS
-      IFS=';'
-      for lt_path in $LIB
-      do
-        IFS=$lt_save_ifs
-        # Let DOS variable expansion print the short 8.3 style file name.
-        lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
-        sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
-      done
-      IFS=$lt_save_ifs
-      # Convert to MSYS style.
-      sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'`
-      ;;
-    cygwin*)
-      # Convert to unix form, then to dos form, then back to unix form
-      # but this time dos style (no spaces!) so that the unix form looks
-      # like /cygdrive/c/PROGRA~1:/cygdr...
-      sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
-      sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
-      sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
-      ;;
-    *)
-      sys_lib_search_path_spec="$LIB"
-      if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
-        # It is most probably a Windows format PATH.
-        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-      else
-        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
-      fi
-      # FIXME: find the short name or the path components, as spaces are
-      # common. (e.g. "Program Files" -> "PROGRA~1")
-      ;;
-    esac
-
-    # DLL is installed to $(libdir)/../bin by postinstall_cmds
-    postinstall_cmds='base_file=`basename \${file}`~
-      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
-      dldir=$destdir/`dirname \$dlpath`~
-      test -d \$dldir || mkdir -p \$dldir~
-      $install_prog $dir/$dlname \$dldir/$dlname'
-    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
-      dlpath=$dir/\$dldll~
-       $RM \$dlpath'
-    shlibpath_overrides_runpath=yes
-    dynamic_linker='Win32 link.exe'
-    ;;
-
-  *)
-    # Assume MSVC wrapper
-    library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
-    dynamic_linker='Win32 ld.exe'
-    ;;
-  esac
-  # FIXME: first we should search . and the directory the executable is in
-  shlibpath_var=PATH
-  ;;
-
-darwin* | rhapsody*)
-  dynamic_linker="$host_os dyld"
-  version_type=darwin
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
-  soname_spec='${libname}${release}${major}$shared_ext'
-  shlibpath_overrides_runpath=yes
-  shlibpath_var=DYLD_LIBRARY_PATH
-  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
-
-  sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"
-  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
-  ;;
-
-dgux*)
-  version_type=linux # correct to gnu/linux during the next big refactor
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-freebsd* | dragonfly*)
-  # DragonFly does not have aout.  When/if they implement a new
-  # versioning mechanism, adjust this.
-  if test -x /usr/bin/objformat; then
-    objformat=`/usr/bin/objformat`
-  else
-    case $host_os in
-    freebsd[23].*) objformat=aout ;;
-    *) objformat=elf ;;
-    esac
-  fi
-  version_type=freebsd-$objformat
-  case $version_type in
-    freebsd-elf*)
-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-      need_version=no
-      need_lib_prefix=no
-      ;;
-    freebsd-*)
-      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
-      need_version=yes
-      ;;
-  esac
-  shlibpath_var=LD_LIBRARY_PATH
-  case $host_os in
-  freebsd2.*)
-    shlibpath_overrides_runpath=yes
-    ;;
-  freebsd3.[01]* | freebsdelf3.[01]*)
-    shlibpath_overrides_runpath=yes
-    hardcode_into_libs=yes
-    ;;
-  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
-  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
-    shlibpath_overrides_runpath=no
-    hardcode_into_libs=yes
-    ;;
-  *) # from 4.6 on, and DragonFly
-    shlibpath_overrides_runpath=yes
-    hardcode_into_libs=yes
-    ;;
-  esac
-  ;;
-
-gnu*)
-  version_type=linux # correct to gnu/linux during the next big refactor
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  ;;
-
-haiku*)
-  version_type=linux # correct to gnu/linux during the next big refactor
-  need_lib_prefix=no
-  need_version=no
-  dynamic_linker="$host_os runtime_loader"
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
-  hardcode_into_libs=yes
-  ;;
-
-hpux9* | hpux10* | hpux11*)
-  # Give a soname corresponding to the major version so that dld.sl refuses to
-  # link against other versions.
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  case $host_cpu in
-  ia64*)
-    shrext_cmds='.so'
-    hardcode_into_libs=yes
-    dynamic_linker="$host_os dld.so"
-    shlibpath_var=LD_LIBRARY_PATH
-    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    if test "X$HPUX_IA64_MODE" = X32; then
-      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
-    else
-      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
-    fi
-    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-    ;;
-  hppa*64*)
-    shrext_cmds='.sl'
-    hardcode_into_libs=yes
-    dynamic_linker="$host_os dld.sl"
-    shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
-    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
-    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-    ;;
-  *)
-    shrext_cmds='.sl'
-    dynamic_linker="$host_os dld.sl"
-    shlibpath_var=SHLIB_PATH
-    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    ;;
-  esac
-  # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
-  postinstall_cmds='chmod 555 $lib'
-  # or fails outright, so override atomically:
-  install_override_mode=555
-  ;;
-
-interix[3-9]*)
-  version_type=linux # correct to gnu/linux during the next big refactor
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  ;;
-
-irix5* | irix6* | nonstopux*)
-  case $host_os in
-    nonstopux*) version_type=nonstopux ;;
-    *)
-	if test "$lt_cv_prog_gnu_ld" = yes; then
-		version_type=linux # correct to gnu/linux during the next big refactor
-	else
-		version_type=irix
-	fi ;;
-  esac
-  need_lib_prefix=no
-  need_version=no
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
-  case $host_os in
-  irix5* | nonstopux*)
-    libsuff= shlibsuff=
-    ;;
-  *)
-    case $LD in # libtool.m4 will add one of these switches to LD
-    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
-      libsuff= shlibsuff= libmagic=32-bit;;
-    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
-      libsuff=32 shlibsuff=N32 libmagic=N32;;
-    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
-      libsuff=64 shlibsuff=64 libmagic=64-bit;;
-    *) libsuff= shlibsuff= libmagic=never-match;;
-    esac
-    ;;
-  esac
-  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
-  shlibpath_overrides_runpath=no
-  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-  hardcode_into_libs=yes
-  ;;
-
-# No shared lib support for Linux oldld, aout, or coff.
-linux*oldld* | linux*aout* | linux*coff*)
-  dynamic_linker=no
-  ;;
-
-# This must be glibc/ELF.
-linux* | k*bsd*-gnu | kopensolaris*-gnu)
-  version_type=linux # correct to gnu/linux during the next big refactor
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-
-  # Some binutils ld are patched to set DT_RUNPATH
-  if ${lt_cv_shlibpath_overrides_runpath+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_shlibpath_overrides_runpath=no
-    save_LDFLAGS=$LDFLAGS
-    save_libdir=$libdir
-    eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \
-	 LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\""
-    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-  if  ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then :
-  lt_cv_shlibpath_overrides_runpath=yes
-fi
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-    LDFLAGS=$save_LDFLAGS
-    libdir=$save_libdir
-
-fi
-
-  shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
-
-  # This implies no fast_install, which is unacceptable.
-  # Some rework will be needed to allow for fast_install
-  # before this can be enabled.
-  hardcode_into_libs=yes
-
-  # Append ld.so.conf contents to the search path
-  if test -f /etc/ld.so.conf; then
-    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
-    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
-  fi
-
-  # We used to test for /lib/ld.so.1 and disable shared libraries on
-  # powerpc, because MkLinux only supported shared libraries with the
-  # GNU dynamic linker.  Since this was broken with cross compilers,
-  # most powerpc-linux boxes support dynamic linking these days and
-  # people can always --disable-shared, the test was removed, and we
-  # assume the GNU/Linux dynamic linker is in use.
-  dynamic_linker='GNU/Linux ld.so'
-  ;;
-
-netbsd*)
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-    dynamic_linker='NetBSD (a.out) ld.so'
-  else
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    dynamic_linker='NetBSD ld.elf_so'
-  fi
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  hardcode_into_libs=yes
-  ;;
-
-newsos6)
-  version_type=linux # correct to gnu/linux during the next big refactor
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  ;;
-
-*nto* | *qnx*)
-  version_type=qnx
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  dynamic_linker='ldqnx.so'
-  ;;
-
-openbsd*)
-  version_type=sunos
-  sys_lib_dlsearch_path_spec="/usr/lib"
-  need_lib_prefix=no
-  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
-  case $host_os in
-    openbsd3.3 | openbsd3.3.*)	need_version=yes ;;
-    *)				need_version=no  ;;
-  esac
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-    case $host_os in
-      openbsd2.[89] | openbsd2.[89].*)
-	shlibpath_overrides_runpath=no
-	;;
-      *)
-	shlibpath_overrides_runpath=yes
-	;;
-      esac
-  else
-    shlibpath_overrides_runpath=yes
-  fi
-  ;;
-
-os2*)
-  libname_spec='$name'
-  shrext_cmds=".dll"
-  need_lib_prefix=no
-  library_names_spec='$libname${shared_ext} $libname.a'
-  dynamic_linker='OS/2 ld.exe'
-  shlibpath_var=LIBPATH
-  ;;
-
-osf3* | osf4* | osf5*)
-  version_type=osf
-  need_lib_prefix=no
-  need_version=no
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  shlibpath_var=LD_LIBRARY_PATH
-  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
-  ;;
-
-rdos*)
-  dynamic_linker=no
-  ;;
-
-solaris*)
-  version_type=linux # correct to gnu/linux during the next big refactor
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  hardcode_into_libs=yes
-  # ldd complains unless libraries are executable
-  postinstall_cmds='chmod +x $lib'
-  ;;
-
-sunos4*)
-  version_type=sunos
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  if test "$with_gnu_ld" = yes; then
-    need_lib_prefix=no
-  fi
-  need_version=yes
-  ;;
-
-sysv4 | sysv4.3*)
-  version_type=linux # correct to gnu/linux during the next big refactor
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  case $host_vendor in
-    sni)
-      shlibpath_overrides_runpath=no
-      need_lib_prefix=no
-      runpath_var=LD_RUN_PATH
-      ;;
-    siemens)
-      need_lib_prefix=no
-      ;;
-    motorola)
-      need_lib_prefix=no
-      need_version=no
-      shlibpath_overrides_runpath=no
-      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
-      ;;
-  esac
-  ;;
-
-sysv4*MP*)
-  if test -d /usr/nec ;then
-    version_type=linux # correct to gnu/linux during the next big refactor
-    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
-    soname_spec='$libname${shared_ext}.$major'
-    shlibpath_var=LD_LIBRARY_PATH
-  fi
-  ;;
-
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-  version_type=freebsd-elf
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  hardcode_into_libs=yes
-  if test "$with_gnu_ld" = yes; then
-    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
-  else
-    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
-    case $host_os in
-      sco3.2v5*)
-        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
-	;;
-    esac
-  fi
-  sys_lib_dlsearch_path_spec='/usr/lib'
-  ;;
-
-tpf*)
-  # TPF is a cross-target only.  Preferred cross-host = GNU/Linux.
-  version_type=linux # correct to gnu/linux during the next big refactor
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  ;;
-
-uts4*)
-  version_type=linux # correct to gnu/linux during the next big refactor
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-*)
-  dynamic_linker=no
-  ;;
-esac
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5
-$as_echo "$dynamic_linker" >&6; }
-test "$dynamic_linker" = no && can_build_shared=no
-
-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
-  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-fi
-
-if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
-  sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
-fi
-if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
-  sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
-fi
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5
-$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
-hardcode_action=
-if test -n "$hardcode_libdir_flag_spec" ||
-   test -n "$runpath_var" ||
-   test "X$hardcode_automatic" = "Xyes" ; then
-
-  # We can hardcode non-existent directories.
-  if test "$hardcode_direct" != no &&
-     # If the only mechanism to avoid hardcoding is shlibpath_var, we
-     # have to relink, otherwise we might link with an installed library
-     # when we should be linking with a yet-to-be-installed one
-     ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no &&
-     test "$hardcode_minus_L" != no; then
-    # Linking always hardcodes the temporary library directory.
-    hardcode_action=relink
-  else
-    # We can link without hardcoding, and we can hardcode nonexisting dirs.
-    hardcode_action=immediate
-  fi
-else
-  # We cannot hardcode anything, or else we can only hardcode existing
-  # directories.
-  hardcode_action=unsupported
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5
-$as_echo "$hardcode_action" >&6; }
-
-if test "$hardcode_action" = relink ||
-   test "$inherit_rpath" = yes; then
-  # Fast installation is not supported
-  enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
-     test "$enable_shared" = no; then
-  # Fast installation is not necessary
-  enable_fast_install=needless
-fi
-
-
-
-
-
-
-  if test "x$enable_dlopen" != xyes; then
-  enable_dlopen=unknown
-  enable_dlopen_self=unknown
-  enable_dlopen_self_static=unknown
-else
-  lt_cv_dlopen=no
-  lt_cv_dlopen_libs=
-
-  case $host_os in
-  beos*)
-    lt_cv_dlopen="load_add_on"
-    lt_cv_dlopen_libs=
-    lt_cv_dlopen_self=yes
-    ;;
-
-  mingw* | pw32* | cegcc*)
-    lt_cv_dlopen="LoadLibrary"
-    lt_cv_dlopen_libs=
-    ;;
-
-  cygwin*)
-    lt_cv_dlopen="dlopen"
-    lt_cv_dlopen_libs=
-    ;;
-
-  darwin*)
-  # if libdl is installed we need to link against it
-    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
-$as_echo_n "checking for dlopen in -ldl... " >&6; }
-if ${ac_cv_lib_dl_dlopen+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldl  $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char dlopen ();
-int
-main ()
-{
-return dlopen ();
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-  ac_cv_lib_dl_dlopen=yes
-else
-  ac_cv_lib_dl_dlopen=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
-$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
-if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
-  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
-else
-
-    lt_cv_dlopen="dyld"
-    lt_cv_dlopen_libs=
-    lt_cv_dlopen_self=yes
-
-fi
-
-    ;;
-
-  *)
-    ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load"
-if test "x$ac_cv_func_shl_load" = xyes; then :
-  lt_cv_dlopen="shl_load"
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5
-$as_echo_n "checking for shl_load in -ldld... " >&6; }
-if ${ac_cv_lib_dld_shl_load+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldld  $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char shl_load ();
-int
-main ()
-{
-return shl_load ();
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-  ac_cv_lib_dld_shl_load=yes
-else
-  ac_cv_lib_dld_shl_load=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5
-$as_echo "$ac_cv_lib_dld_shl_load" >&6; }
-if test "x$ac_cv_lib_dld_shl_load" = xyes; then :
-  lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
-else
-  ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen"
-if test "x$ac_cv_func_dlopen" = xyes; then :
-  lt_cv_dlopen="dlopen"
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
-$as_echo_n "checking for dlopen in -ldl... " >&6; }
-if ${ac_cv_lib_dl_dlopen+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldl  $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char dlopen ();
-int
-main ()
-{
-return dlopen ();
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-  ac_cv_lib_dl_dlopen=yes
-else
-  ac_cv_lib_dl_dlopen=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
-$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
-if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
-  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5
-$as_echo_n "checking for dlopen in -lsvld... " >&6; }
-if ${ac_cv_lib_svld_dlopen+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lsvld  $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char dlopen ();
-int
-main ()
-{
-return dlopen ();
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-  ac_cv_lib_svld_dlopen=yes
-else
-  ac_cv_lib_svld_dlopen=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5
-$as_echo "$ac_cv_lib_svld_dlopen" >&6; }
-if test "x$ac_cv_lib_svld_dlopen" = xyes; then :
-  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5
-$as_echo_n "checking for dld_link in -ldld... " >&6; }
-if ${ac_cv_lib_dld_dld_link+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldld  $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char dld_link ();
-int
-main ()
-{
-return dld_link ();
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-  ac_cv_lib_dld_dld_link=yes
-else
-  ac_cv_lib_dld_dld_link=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5
-$as_echo "$ac_cv_lib_dld_dld_link" >&6; }
-if test "x$ac_cv_lib_dld_dld_link" = xyes; then :
-  lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"
-fi
-
-
-fi
-
-
-fi
-
-
-fi
-
-
-fi
-
-
-fi
-
-    ;;
-  esac
-
-  if test "x$lt_cv_dlopen" != xno; then
-    enable_dlopen=yes
-  else
-    enable_dlopen=no
-  fi
-
-  case $lt_cv_dlopen in
-  dlopen)
-    save_CPPFLAGS="$CPPFLAGS"
-    test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
-
-    save_LDFLAGS="$LDFLAGS"
-    wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
-
-    save_LIBS="$LIBS"
-    LIBS="$lt_cv_dlopen_libs $LIBS"
-
-    { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5
-$as_echo_n "checking whether a program can dlopen itself... " >&6; }
-if ${lt_cv_dlopen_self+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  	  if test "$cross_compiling" = yes; then :
-  lt_cv_dlopen_self=cross
-else
-  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
-  lt_status=$lt_dlunknown
-  cat > conftest.$ac_ext <<_LT_EOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-#if HAVE_DLFCN_H
-#include <dlfcn.h>
-#endif
-
-#include <stdio.h>
-
-#ifdef RTLD_GLOBAL
-#  define LT_DLGLOBAL		RTLD_GLOBAL
-#else
-#  ifdef DL_GLOBAL
-#    define LT_DLGLOBAL		DL_GLOBAL
-#  else
-#    define LT_DLGLOBAL		0
-#  endif
-#endif
-
-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
-   find out it does not work in some platform. */
-#ifndef LT_DLLAZY_OR_NOW
-#  ifdef RTLD_LAZY
-#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
-#  else
-#    ifdef DL_LAZY
-#      define LT_DLLAZY_OR_NOW		DL_LAZY
-#    else
-#      ifdef RTLD_NOW
-#        define LT_DLLAZY_OR_NOW	RTLD_NOW
-#      else
-#        ifdef DL_NOW
-#          define LT_DLLAZY_OR_NOW	DL_NOW
-#        else
-#          define LT_DLLAZY_OR_NOW	0
-#        endif
-#      endif
-#    endif
-#  endif
-#endif
-
-/* When -fvisbility=hidden is used, assume the code has been annotated
-   correspondingly for the symbols needed.  */
-#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
-int fnord () __attribute__((visibility("default")));
-#endif
-
-int fnord () { return 42; }
-int main ()
-{
-  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
-  int status = $lt_dlunknown;
-
-  if (self)
-    {
-      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
-      else
-        {
-	  if (dlsym( self,"_fnord"))  status = $lt_dlneed_uscore;
-          else puts (dlerror ());
-	}
-      /* dlclose (self); */
-    }
-  else
-    puts (dlerror ());
-
-  return status;
-}
-_LT_EOF
-  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
-    (./conftest; exit; ) >&5 2>/dev/null
-    lt_status=$?
-    case x$lt_status in
-      x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
-      x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;;
-      x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;;
-    esac
-  else :
-    # compilation failed
-    lt_cv_dlopen_self=no
-  fi
-fi
-rm -fr conftest*
-
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5
-$as_echo "$lt_cv_dlopen_self" >&6; }
-
-    if test "x$lt_cv_dlopen_self" = xyes; then
-      wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
-      { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5
-$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; }
-if ${lt_cv_dlopen_self_static+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  	  if test "$cross_compiling" = yes; then :
-  lt_cv_dlopen_self_static=cross
-else
-  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
-  lt_status=$lt_dlunknown
-  cat > conftest.$ac_ext <<_LT_EOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-#if HAVE_DLFCN_H
-#include <dlfcn.h>
-#endif
-
-#include <stdio.h>
-
-#ifdef RTLD_GLOBAL
-#  define LT_DLGLOBAL		RTLD_GLOBAL
-#else
-#  ifdef DL_GLOBAL
-#    define LT_DLGLOBAL		DL_GLOBAL
-#  else
-#    define LT_DLGLOBAL		0
-#  endif
-#endif
-
-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
-   find out it does not work in some platform. */
-#ifndef LT_DLLAZY_OR_NOW
-#  ifdef RTLD_LAZY
-#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
-#  else
-#    ifdef DL_LAZY
-#      define LT_DLLAZY_OR_NOW		DL_LAZY
-#    else
-#      ifdef RTLD_NOW
-#        define LT_DLLAZY_OR_NOW	RTLD_NOW
-#      else
-#        ifdef DL_NOW
-#          define LT_DLLAZY_OR_NOW	DL_NOW
-#        else
-#          define LT_DLLAZY_OR_NOW	0
-#        endif
-#      endif
-#    endif
-#  endif
-#endif
-
-/* When -fvisbility=hidden is used, assume the code has been annotated
-   correspondingly for the symbols needed.  */
-#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
-int fnord () __attribute__((visibility("default")));
-#endif
-
-int fnord () { return 42; }
-int main ()
-{
-  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
-  int status = $lt_dlunknown;
-
-  if (self)
-    {
-      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
-      else
-        {
-	  if (dlsym( self,"_fnord"))  status = $lt_dlneed_uscore;
-          else puts (dlerror ());
-	}
-      /* dlclose (self); */
-    }
-  else
-    puts (dlerror ());
-
-  return status;
-}
-_LT_EOF
-  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
-    (./conftest; exit; ) >&5 2>/dev/null
-    lt_status=$?
-    case x$lt_status in
-      x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
-      x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;;
-      x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;;
-    esac
-  else :
-    # compilation failed
-    lt_cv_dlopen_self_static=no
-  fi
-fi
-rm -fr conftest*
-
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5
-$as_echo "$lt_cv_dlopen_self_static" >&6; }
-    fi
-
-    CPPFLAGS="$save_CPPFLAGS"
-    LDFLAGS="$save_LDFLAGS"
-    LIBS="$save_LIBS"
-    ;;
-  esac
-
-  case $lt_cv_dlopen_self in
-  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
-  *) enable_dlopen_self=unknown ;;
-  esac
-
-  case $lt_cv_dlopen_self_static in
-  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
-  *) enable_dlopen_self_static=unknown ;;
-  esac
-fi
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-striplib=
-old_striplib=
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5
-$as_echo_n "checking whether stripping libraries is possible... " >&6; }
-if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
-  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
-  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-else
-# FIXME - insert some real tests, host_os isn't really good enough
-  case $host_os in
-  darwin*)
-    if test -n "$STRIP" ; then
-      striplib="$STRIP -x"
-      old_striplib="$STRIP -S"
-      { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-    else
-      { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-    fi
-    ;;
-  *)
-    { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-    ;;
-  esac
-fi
-
-
-
-
-
-
-
-
-
-
-
-
-  # Report which library types will actually be built
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5
-$as_echo_n "checking if libtool supports shared libraries... " >&6; }
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5
-$as_echo "$can_build_shared" >&6; }
-
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5
-$as_echo_n "checking whether to build shared libraries... " >&6; }
-  test "$can_build_shared" = "no" && enable_shared=no
-
-  # On AIX, shared libraries and static libraries use the same namespace, and
-  # are all built from PIC.
-  case $host_os in
-  aix3*)
-    test "$enable_shared" = yes && enable_static=no
-    if test -n "$RANLIB"; then
-      archive_cmds="$archive_cmds~\$RANLIB \$lib"
-      postinstall_cmds='$RANLIB $lib'
-    fi
-    ;;
-
-  aix[4-9]*)
-    if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-      test "$enable_shared" = yes && enable_static=no
-    fi
-    ;;
-  esac
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5
-$as_echo "$enable_shared" >&6; }
-
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5
-$as_echo_n "checking whether to build static libraries... " >&6; }
-  # Make sure either enable_shared or enable_static is yes.
-  test "$enable_shared" = yes || enable_static=yes
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5
-$as_echo "$enable_static" >&6; }
-
-
-
-
-fi
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-CC="$lt_save_CC"
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-        ac_config_commands="$ac_config_commands libtool"
-
-
-
-
-# Only expand once:
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AmigaOS /C/install, which installs bootblocks on floppy discs
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# OS/2's system install, which has a completely different semantic
-# ./install, which can be erroneously created by make from ./install.sh.
-# Reject install programs that cannot install multiple files.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5
-$as_echo_n "checking for a BSD-compatible install... " >&6; }
-if test -z "$INSTALL"; then
-if ${ac_cv_path_install+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    # Account for people who put trailing slashes in PATH elements.
-case $as_dir/ in #((
-  ./ | .// | /[cC]/* | \
-  /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
-  ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \
-  /usr/ucb/* ) ;;
-  *)
-    # OSF1 and SCO ODT 3.0 have their own names for install.
-    # Don't use installbsd from OSF since it installs stuff as root
-    # by default.
-    for ac_prog in ginstall scoinst install; do
-      for ac_exec_ext in '' $ac_executable_extensions; do
-	if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
-	  if test $ac_prog = install &&
-	    grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  elif test $ac_prog = install &&
-	    grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
-	    # program-specific install script used by HP pwplus--don't use.
-	    :
-	  else
-	    rm -rf conftest.one conftest.two conftest.dir
-	    echo one > conftest.one
-	    echo two > conftest.two
-	    mkdir conftest.dir
-	    if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
-	      test -s conftest.one && test -s conftest.two &&
-	      test -s conftest.dir/conftest.one &&
-	      test -s conftest.dir/conftest.two
-	    then
-	      ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
-	      break 3
-	    fi
-	  fi
-	fi
-      done
-    done
-    ;;
-esac
-
-  done
-IFS=$as_save_IFS
-
-rm -rf conftest.one conftest.two conftest.dir
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL=$ac_cv_path_install
-  else
-    # As a last resort, use the slow shell script.  Don't cache a
-    # value for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the value is a relative name.
-    INSTALL=$ac_install_sh
-  fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5
-$as_echo "$INSTALL" >&6; }
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5
-$as_echo_n "checking whether ln -s works... " >&6; }
-LN_S=$as_ln_s
-if test "$LN_S" = "ln -s"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5
-$as_echo "no, using $LN_S" >&6; }
-fi
-
-
-
-
-
-
-
-# Warn if the user specified libbind, which is now deprecated
-# Check whether --enable-libbind was given.
-if test "${enable_libbind+set}" = set; then :
-  enableval=$enable_libbind;
-fi
-
-
-case "$enable_libbind" in
-	yes)
-		as_fn_error $? "'libbind' is no longer part of the BIND 9 distribution.
-It is available from http://www.isc.org as a separate download." "$LINENO" 5
-		;;
-	no|'')
-		;;
-esac
-
-# Check whether --enable-developer was given.
-if test "${enable_developer+set}" = set; then :
-  enableval=$enable_developer;
-fi
-
-case "$enable_developer" in
-yes)
-	STD_CDEFINES="$STD_CDEFINES -DISC_LIST_CHECKINIT=1"
-	test "${enable_fixed_rrset+set}" = set || enable_fixed_rrset=yes
-	test "${with_atf+set}" = set || with_atf=yes
-	test "${enable_filter_aaaa+set}" = set || enable_filter_aaaa=yes
-	test "${with_dlz_filesystem+set}" = set || with_dlz_filesystem=yes
-	case "$host" in
-	*-darwin*)
-		test "${enable_exportlib+set}" = set || enable_exportlib=yes
-		;;
-	*-linux*)
-		test "${enable_exportlib+set}" = set || enable_exportlib=yes
-		;;
-	esac
-	;;
-esac
-#
-# Make very sure that these are the first files processed by
-# config.status, since we use the processed output as the input for
-# AC_SUBST_FILE() substitutions in other files.
-#
-ac_config_files="$ac_config_files make/rules make/includes"
-
-
-# Extract the first word of "ar", so it can be a program name with args.
-set dummy ar; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_AR+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  case $AR in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_AR="$AR" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_AR="$as_dir/$ac_word$ac_exec_ext"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-  ;;
-esac
-fi
-AR=$ac_cv_path_AR
-if test -n "$AR"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
-$as_echo "$AR" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-ARFLAGS="cruv"
-
-
-
-# The POSIX ln(1) program.  Non-POSIX systems may substitute
-# "copy" or something.
-LN=ln
-
-
-case "$AR" in
-	"")
-		as_fn_error $? "
-ar program not found.  Please fix your PATH to include the directory in
-which ar resides, or set AR in the environment with the full path to ar.
-" "$LINENO" 5
-
-		;;
-esac
-
-#
-# Etags.
-#
-for ac_prog in etags emacs-etags
-do
-  # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_ETAGS+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  case $ETAGS in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_ETAGS="$ETAGS" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_ETAGS="$as_dir/$ac_word$ac_exec_ext"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-  ;;
-esac
-fi
-ETAGS=$ac_cv_path_ETAGS
-if test -n "$ETAGS"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ETAGS" >&5
-$as_echo "$ETAGS" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-  test -n "$ETAGS" && break
-done
-
-
-#
-# Some systems, e.g. RH7, have the Exuberant Ctags etags instead of
-# GNU emacs etags, and it requires the -L flag.
-#
-if test "X$ETAGS" != "X"; then
-	{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Exuberant Ctags etags" >&5
-$as_echo_n "checking for Exuberant Ctags etags... " >&6; }
-	if $ETAGS --version 2>&1 | grep 'Exuberant Ctags' >/dev/null 2>&1; then
-		{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-		ETAGS="$ETAGS -L"
-	else
-		{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-	fi
-fi
-
-
-#
-# Perl is optional; it is used only by some of the system test scripts.
-# Note: the backtrace feature (see below) uses perl to build the symbol table,
-# but it still compiles without perl, in which case an empty table will be used.
-#
-for ac_prog in perl5 perl
-do
-  # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_PERL+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  case $PERL in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_PERL="$PERL" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_PERL="$as_dir/$ac_word$ac_exec_ext"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-  ;;
-esac
-fi
-PERL=$ac_cv_path_PERL
-if test -n "$PERL"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PERL" >&5
-$as_echo "$PERL" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-  test -n "$PERL" && break
-done
-
-
-
-#
-# Special processing of paths depending on whether --prefix,
-# --sysconfdir or --localstatedir arguments were given.  What's
-# desired is some compatibility with the way previous versions
-# of BIND built; they defaulted to /usr/local for most parts of
-# the installation, but named.boot/named.conf was in /etc
-# and named.pid was in /var/run.
-#
-# So ... if none of --prefix, --sysconfdir or --localstatedir are
-# specified, set things up that way.  If --prefix is given, use
-# it for sysconfdir and localstatedir the way configure normally
-# would.  To change the prefix for everything but leave named.conf
-# in /etc or named.pid in /var/run, then do this the usual configure way:
-# ./configure --prefix=/somewhere --sysconfdir=/etc
-# ./configure --prefix=/somewhere --localstatedir=/var
-#
-# To put named.conf and named.pid in /usr/local with everything else,
-# set the prefix explicitly to /usr/local even though that's the default:
-# ./configure --prefix=/usr/local
-#
-case "$prefix" in
-	NONE)
-		case "$sysconfdir" in
-			'${prefix}/etc')
-				sysconfdir=/etc
-				;;
-		esac
-		case "$localstatedir" in
-			'${prefix}/var')
-				localstatedir=/var
-				;;
-		esac
-		;;
-esac
-
-#
-# Make sure INSTALL uses an absolute path, else it will be wrong in all
-# Makefiles, since they use make/rules.in and INSTALL will be adjusted by
-# configure based on the location of the file where it is substituted.
-# Since in BIND9 INSTALL is only substituted into make/rules.in, an immediate
-# subdirectory of install-sh, This relative path will be wrong for all
-# directories more than one level down from install-sh.
-#
-case "$INSTALL" in
-	/*)
-		;;
-	*)
-		#
-		# Not all systems have dirname.
-		#
-
-		ac_dir="`echo $INSTALL | sed 's%/[^/]*$%%'`"
-
-
-		ac_prog="`echo $INSTALL | sed 's%.*/%%'`"
-		test "$ac_dir" = "$ac_prog" && ac_dir=.
-		test -d "$ac_dir" && ac_dir="`(cd \"$ac_dir\" && pwd)`"
-		INSTALL="$ac_dir/$ac_prog"
-		;;
-esac
-
-#
-# On these hosts, we really want to use cc, not gcc, even if it is
-# found.  The gcc that these systems have will not correctly handle
-# pthreads.
-#
-# However, if the user sets $CC to be something, let that override
-# our change.
-#
-if test "X$CC" = "X" ; then
-	case "$host" in
-		*-dec-osf*)
-			CC="cc"
-			;;
-		*-solaris*)
-			# Use Sun's cc if it is available, but watch
-			# out for /usr/ucb/cc; it will never be the right
-			# compiler to use.
-			#
-			# If setting CC here fails, the AC_PROG_CC done
-			# below might still find gcc.
-			IFS="${IFS=	}"; ac_save_ifs="$IFS"; IFS=":"
-			for ac_dir in $PATH; do
-				test -z "$ac_dir" && ac_dir=.
-				case "$ac_dir" in
-				/usr/ucb)
-					# exclude
-					;;
-				*)
-					if test -f "$ac_dir/cc"; then
-						CC="$ac_dir/cc"
-						break
-					fi
-					;;
-				esac
-			done
-			IFS="$ac_save_ifs"
-			;;
-		*-hp-hpux*)
-			CC="cc"
-			;;
-		mips-sgi-irix*)
-			CC="cc"
-			;;
-	esac
-fi
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
-set dummy ${ac_tool_prefix}gcc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_CC+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_CC="${ac_tool_prefix}gcc"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_CC"; then
-  ac_ct_CC=$CC
-  # Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_CC+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_CC"; then
-  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_CC="gcc"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
-$as_echo "$ac_ct_CC" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-  if test "x$ac_ct_CC" = x; then
-    CC=""
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    CC=$ac_ct_CC
-  fi
-else
-  CC="$ac_cv_prog_CC"
-fi
-
-if test -z "$CC"; then
-          if test -n "$ac_tool_prefix"; then
-    # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
-set dummy ${ac_tool_prefix}cc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_CC+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_CC="${ac_tool_prefix}cc"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-  fi
-fi
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_CC+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  ac_prog_rejected=no
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
-       ac_prog_rejected=yes
-       continue
-     fi
-    ac_cv_prog_CC="cc"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# != 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
-  fi
-fi
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$CC"; then
-  if test -n "$ac_tool_prefix"; then
-  for ac_prog in cl.exe
-  do
-    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_CC+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-    test -n "$CC" && break
-  done
-fi
-if test -z "$CC"; then
-  ac_ct_CC=$CC
-  for ac_prog in cl.exe
-do
-  # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_CC+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_CC"; then
-  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_CC="$ac_prog"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
-$as_echo "$ac_ct_CC" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-  test -n "$ac_ct_CC" && break
-done
-
-  if test "x$ac_ct_CC" = x; then
-    CC=""
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    CC=$ac_ct_CC
-  fi
-fi
-
-fi
-
-
-test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "no acceptable C compiler found in \$PATH
-See \`config.log' for more details" "$LINENO" 5; }
-
-# Provide some information about the compiler.
-$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
-set X $ac_compile
-ac_compiler=$2
-for ac_option in --version -v -V -qversion; do
-  { { ac_try="$ac_compiler $ac_option >&5"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_compiler $ac_option >&5") 2>conftest.err
-  ac_status=$?
-  if test -s conftest.err; then
-    sed '10a\
-... rest of stderr output deleted ...
-         10q' conftest.err >conftest.er1
-    cat conftest.er1 >&5
-  fi
-  rm -f conftest.er1 conftest.err
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }
-done
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
-$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
-if ${ac_cv_c_compiler_gnu+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-#ifndef __GNUC__
-       choke me
-#endif
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  ac_compiler_gnu=yes
-else
-  ac_compiler_gnu=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-ac_cv_c_compiler_gnu=$ac_compiler_gnu
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
-$as_echo "$ac_cv_c_compiler_gnu" >&6; }
-if test $ac_compiler_gnu = yes; then
-  GCC=yes
-else
-  GCC=
-fi
-ac_test_CFLAGS=${CFLAGS+set}
-ac_save_CFLAGS=$CFLAGS
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
-$as_echo_n "checking whether $CC accepts -g... " >&6; }
-if ${ac_cv_prog_cc_g+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_save_c_werror_flag=$ac_c_werror_flag
-   ac_c_werror_flag=yes
-   ac_cv_prog_cc_g=no
-   CFLAGS="-g"
-   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  ac_cv_prog_cc_g=yes
-else
-  CFLAGS=""
-      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-
-else
-  ac_c_werror_flag=$ac_save_c_werror_flag
-	 CFLAGS="-g"
-	 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  ac_cv_prog_cc_g=yes
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-   ac_c_werror_flag=$ac_save_c_werror_flag
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
-$as_echo "$ac_cv_prog_cc_g" >&6; }
-if test "$ac_test_CFLAGS" = set; then
-  CFLAGS=$ac_save_CFLAGS
-elif test $ac_cv_prog_cc_g = yes; then
-  if test "$GCC" = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-g"
-  fi
-else
-  if test "$GCC" = yes; then
-    CFLAGS="-O2"
-  else
-    CFLAGS=
-  fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
-$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
-if ${ac_cv_prog_cc_c89+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_cv_prog_cc_c89=no
-ac_save_CC=$CC
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include <stdarg.h>
-#include <stdio.h>
-struct stat;
-/* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */
-struct buf { int x; };
-FILE * (*rcsopen) (struct buf *, struct stat *, int);
-static char *e (p, i)
-     char **p;
-     int i;
-{
-  return p[i];
-}
-static char *f (char * (*g) (char **, int), char **p, ...)
-{
-  char *s;
-  va_list v;
-  va_start (v,p);
-  s = g (p, va_arg (v,int));
-  va_end (v);
-  return s;
-}
-
-/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default.  It has
-   function prototypes and stuff, but not '\xHH' hex character constants.
-   These don't provoke an error unfortunately, instead are silently treated
-   as 'x'.  The following induces an error, until -std is added to get
-   proper ANSI mode.  Curiously '\x00'!='x' always comes out true, for an
-   array size at least.  It's necessary to write '\x00'==0 to get something
-   that's true only with -std.  */
-int osf4_cc_array ['\x00' == 0 ? 1 : -1];
-
-/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
-   inside strings and character constants.  */
-#define FOO(x) 'x'
-int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
-
-int test (int i, double x);
-struct s1 {int (*f) (int a);};
-struct s2 {int (*f) (double a);};
-int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
-int argc;
-char **argv;
-int
-main ()
-{
-return f (e, argv, 0) != argv[0]  ||  f (e, argv, 1) != argv[1];
-  ;
-  return 0;
-}
-_ACEOF
-for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
-	-Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
-do
-  CC="$ac_save_CC $ac_arg"
-  if ac_fn_c_try_compile "$LINENO"; then :
-  ac_cv_prog_cc_c89=$ac_arg
-fi
-rm -f core conftest.err conftest.$ac_objext
-  test "x$ac_cv_prog_cc_c89" != "xno" && break
-done
-rm -f conftest.$ac_ext
-CC=$ac_save_CC
-
-fi
-# AC_CACHE_VAL
-case "x$ac_cv_prog_cc_c89" in
-  x)
-    { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
-$as_echo "none needed" >&6; } ;;
-  xno)
-    { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
-$as_echo "unsupported" >&6; } ;;
-  *)
-    CC="$CC $ac_cv_prog_cc_c89"
-    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
-$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
-esac
-if test "x$ac_cv_prog_cc_c89" != xno; then :
-
-fi
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-#
-# gcc's optimiser is broken at -02 for ultrasparc
-#
-if test "$ac_env_CFLAGS_set" != set -a "X$GCC" = "Xyes"; then
-	case "$host" in
-	sparc-*)
-		CCFLAGS="-g -O1"
-		;;
-	esac
-fi
-
-#
-# OS dependent CC flags
-#
-case "$host" in
-	# OSF 5.0: recv/send are only available with -D_POSIX_PII_SOCKET or
-	# -D_XOPEN_SOURCE_EXTENDED.
-	*-dec-osf*)
-		STD_CDEFINES="$STD_CDEFINES -D_POSIX_PII_SOCKET"
-		CPPFLAGS="$CPPFLAGS -D_POSIX_PII_SOCKET"
-		;;
-	#HP-UX: need -D_XOPEN_SOURCE_EXTENDED and -lxnet for CMSG macros
-	*-hp-hpux*)
-		STD_CDEFINES="$STD_CDEFINES -D_XOPEN_SOURCE_EXTENDED"
-		CPPFLAGS="$CPPFLAGS -D_XOPEN_SOURCE_EXTENDED"
-		LIBS="-lxnet $LIBS"
-		;;
-	# Solaris: need -D_XPG4_2 and -D__EXTENSIONS__ for CMSG macros
-	*-solaris*)
-		STD_CDEFINES="$STD_CDEFINES -D_XPG4_2 -D__EXTENSIONS__"
-		CPPFLAGS="$CPPFLAGS -D_XPG4_2 -D__EXTENSIONS__"
-		;;
-	# POSIX doesn't include the IPv6 Advanced Socket API and glibc hides
-	# parts of the IPv6 Advanced Socket API as a result.  This is stupid
-	# as it breaks how the two halves (Basic and Advanced) of the IPv6
-	# Socket API were designed to be used but we have to live with it.
-	# Define _GNU_SOURCE to pull in the IPv6 Advanced Socket API.
-	*-linux* | *-kfreebsd*-gnu)
-		STD_CDEFINES="$STD_CDEFINES -D_GNU_SOURCE"
-		CPPFLAGS="$CPPFLAGS -D_GNU_SOURCE"
-		;;
-	#
-	# Starting with OSX 10.7 (Lion) we must choose which IPv6 API to use.
-	# Setting this is sufficient to select the correct behavior for BIND 9.
-	#
-	*-darwin*)
-	  STD_CDEFINES="$STD_CDEFINES -D__APPLE_USE_RFC_3542"
-	  CPPFLAGS="$CPPFLAGS -D__APPLE_USE_RFC_3542"
-	  ;;
-esac
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
-$as_echo_n "checking for ANSI C header files... " >&6; }
-if ${ac_cv_header_stdc+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include <stdlib.h>
-#include <stdarg.h>
-#include <string.h>
-#include <float.h>
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  ac_cv_header_stdc=yes
-else
-  ac_cv_header_stdc=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-
-if test $ac_cv_header_stdc = yes; then
-  # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include <string.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  $EGREP "memchr" >/dev/null 2>&1; then :
-
-else
-  ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-fi
-
-if test $ac_cv_header_stdc = yes; then
-  # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include <stdlib.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  $EGREP "free" >/dev/null 2>&1; then :
-
-else
-  ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-fi
-
-if test $ac_cv_header_stdc = yes; then
-  # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
-  if test "$cross_compiling" = yes; then :
-  :
-else
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include <ctype.h>
-#include <stdlib.h>
-#if ((' ' & 0x0FF) == 0x020)
-# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
-# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
-#else
-# define ISLOWER(c) \
-		   (('a' <= (c) && (c) <= 'i') \
-		     || ('j' <= (c) && (c) <= 'r') \
-		     || ('s' <= (c) && (c) <= 'z'))
-# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
-#endif
-
-#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
-int
-main ()
-{
-  int i;
-  for (i = 0; i < 256; i++)
-    if (XOR (islower (i), ISLOWER (i))
-	|| toupper (i) != TOUPPER (i))
-      return 2;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_run "$LINENO"; then :
-
-else
-  ac_cv_header_stdc=no
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
-  conftest.$ac_objext conftest.beam conftest.$ac_ext
-fi
-
-fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5
-$as_echo "$ac_cv_header_stdc" >&6; }
-if test $ac_cv_header_stdc = yes; then
-
-$as_echo "#define STDC_HEADERS 1" >>confdefs.h
-
-fi
-
-
-for ac_header in fcntl.h regex.h sys/time.h unistd.h sys/sockio.h sys/select.h sys/param.h sys/sysctl.h net/if6.h
-do :
-  as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
-#ifdef HAVE_SYS_PARAM_H
-# include <sys/param.h>
-#endif
-
-"
-if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
-  cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-
-done
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for an ANSI C-conforming const" >&5
-$as_echo_n "checking for an ANSI C-conforming const... " >&6; }
-if ${ac_cv_c_const+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-#ifndef __cplusplus
-  /* Ultrix mips cc rejects this sort of thing.  */
-  typedef int charset[2];
-  const charset cs = { 0, 0 };
-  /* SunOS 4.1.1 cc rejects this.  */
-  char const *const *pcpcc;
-  char **ppc;
-  /* NEC SVR4.0.2 mips cc rejects this.  */
-  struct point {int x, y;};
-  static struct point const zero = {0,0};
-  /* AIX XL C 1.02.0.0 rejects this.
-     It does not let you subtract one const X* pointer from another in
-     an arm of an if-expression whose if-part is not a constant
-     expression */
-  const char *g = "string";
-  pcpcc = &g + (g ? g-g : 0);
-  /* HPUX 7.0 cc rejects these. */
-  ++pcpcc;
-  ppc = (char**) pcpcc;
-  pcpcc = (char const *const *) ppc;
-  { /* SCO 3.2v4 cc rejects this sort of thing.  */
-    char tx;
-    char *t = &tx;
-    char const *s = 0 ? (char *) 0 : (char const *) 0;
-
-    *t++ = 0;
-    if (s) return 0;
-  }
-  { /* Someone thinks the Sun supposedly-ANSI compiler will reject this.  */
-    int x[] = {25, 17};
-    const int *foo = &x[0];
-    ++foo;
-  }
-  { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */
-    typedef const int *iptr;
-    iptr p = 0;
-    ++p;
-  }
-  { /* AIX XL C 1.02.0.0 rejects this sort of thing, saying
-       "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */
-    struct s { int j; const int *ap[3]; } bx;
-    struct s *b = &bx; b->j = 5;
-  }
-  { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */
-    const int foo = 10;
-    if (!foo) return 0;
-  }
-  return !cs[0] && !zero.x;
-#endif
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  ac_cv_c_const=yes
-else
-  ac_cv_c_const=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_const" >&5
-$as_echo "$ac_cv_c_const" >&6; }
-if test $ac_cv_c_const = no; then
-
-$as_echo "#define const /**/" >>confdefs.h
-
-fi
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for inline" >&5
-$as_echo_n "checking for inline... " >&6; }
-if ${ac_cv_c_inline+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_cv_c_inline=no
-for ac_kw in inline __inline__ __inline; do
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#ifndef __cplusplus
-typedef int foo_t;
-static $ac_kw foo_t static_foo () {return 0; }
-$ac_kw foo_t foo () {return 0; }
-#endif
-
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  ac_cv_c_inline=$ac_kw
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-  test "$ac_cv_c_inline" != no && break
-done
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_inline" >&5
-$as_echo "$ac_cv_c_inline" >&6; }
-
-case $ac_cv_c_inline in
-  inline | yes) ;;
-  *)
-    case $ac_cv_c_inline in
-      no) ac_val=;;
-      *) ac_val=$ac_cv_c_inline;;
-    esac
-    cat >>confdefs.h <<_ACEOF
-#ifndef __cplusplus
-#define inline $ac_val
-#endif
-_ACEOF
-    ;;
-esac
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for working volatile" >&5
-$as_echo_n "checking for working volatile... " >&6; }
-if ${ac_cv_c_volatile+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-volatile int x;
-int * volatile y = (int *) 0;
-return !x && !y;
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  ac_cv_c_volatile=yes
-else
-  ac_cv_c_volatile=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_volatile" >&5
-$as_echo "$ac_cv_c_volatile" >&6; }
-if test $ac_cv_c_volatile = no; then
-
-$as_echo "#define volatile /**/" >>confdefs.h
-
-fi
-
-ac_fn_c_check_func "$LINENO" "sysctlbyname" "ac_cv_func_sysctlbyname"
-if test "x$ac_cv_func_sysctlbyname" = xyes; then :
-  $as_echo "#define HAVE_SYSCTLBYNAME 1" >>confdefs.h
-
-fi
-
-
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for flexible array members" >&5
-$as_echo_n "checking for flexible array members... " >&6; }
-if ${ac_cv_c_flexmember+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include <stdlib.h>
-	    #include <stdio.h>
-	    #include <stddef.h>
-	    struct s { int n; double d[]; };
-int
-main ()
-{
-int m = getchar ();
-	    struct s *p = malloc (offsetof (struct s, d)
-				  + m * sizeof (double));
-	    p->d[0] = 0.0;
-	    return p->d != (double *) NULL;
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  ac_cv_c_flexmember=yes
-else
-  ac_cv_c_flexmember=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_flexmember" >&5
-$as_echo "$ac_cv_c_flexmember" >&6; }
-  if test $ac_cv_c_flexmember = yes; then
-
-$as_echo "#define FLEXIBLE_ARRAY_MEMBER /**/" >>confdefs.h
-
-  else
-    $as_echo "#define FLEXIBLE_ARRAY_MEMBER 1" >>confdefs.h
-
-  fi
-
-
-#
-# Older versions of HP/UX don't define seteuid() and setegid()
-#
-for ac_func in seteuid setresuid
-do :
-  as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
-ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
-if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
-  cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-done
-
-for ac_func in setegid setresgid
-do :
-  as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
-ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
-if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
-  cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-done
-
-
-#
-# UnixWare 7.1.1 with the feature supplement to the UDK compiler
-# is reported to not support "static inline" (RT #1212).
-#
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for static inline breakage" >&5
-$as_echo_n "checking for static inline breakage... " >&6; }
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-	static inline int foo1() {
-		return 0;
-	}
-
-	static inline int foo2() {
-		return foo1();
-	}
-
-int
-main ()
-{
-foo1();
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-
-$as_echo "#define inline /**/" >>confdefs.h
-
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-
-ac_fn_c_check_type "$LINENO" "size_t" "ac_cv_type_size_t" "$ac_includes_default"
-if test "x$ac_cv_type_size_t" = xyes; then :
-
-else
-
-cat >>confdefs.h <<_ACEOF
-#define size_t unsigned int
-_ACEOF
-
-fi
-
-ac_fn_c_check_type "$LINENO" "ssize_t" "ac_cv_type_ssize_t" "$ac_includes_default"
-if test "x$ac_cv_type_ssize_t" = xyes; then :
-
-else
-
-cat >>confdefs.h <<_ACEOF
-#define ssize_t int
-_ACEOF
-
-fi
-
-ac_fn_c_check_type "$LINENO" "uintptr_t" "ac_cv_type_uintptr_t" "$ac_includes_default"
-if test "x$ac_cv_type_uintptr_t" = xyes; then :
-
-else
-
-cat >>confdefs.h <<_ACEOF
-#define uintptr_t unsigned long
-_ACEOF
-
-fi
-
-ac_fn_c_check_type "$LINENO" "socklen_t" "ac_cv_type_socklen_t" "
-#include <sys/types.h>
-#include <sys/socket.h>
-
-"
-if test "x$ac_cv_type_socklen_t" = xyes; then :
-  $as_echo "#define ISC_SOCKADDR_LEN_T socklen_t" >>confdefs.h
-
-else
-
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-#include <sys/types.h>
-#include <sys/socket.h>
-int getsockname(int, struct sockaddr *, size_t *);
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  $as_echo "#define ISC_SOCKADDR_LEN_T size_t" >>confdefs.h
-
-else
-  $as_echo "#define ISC_SOCKADDR_LEN_T int" >>confdefs.h
-
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-
-fi
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether time.h and sys/time.h may both be included" >&5
-$as_echo_n "checking whether time.h and sys/time.h may both be included... " >&6; }
-if ${ac_cv_header_time+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include <sys/types.h>
-#include <sys/time.h>
-#include <time.h>
-
-int
-main ()
-{
-if ((struct tm *) 0)
-return 0;
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  ac_cv_header_time=yes
-else
-  ac_cv_header_time=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_time" >&5
-$as_echo "$ac_cv_header_time" >&6; }
-if test $ac_cv_header_time = yes; then
-
-$as_echo "#define TIME_WITH_SYS_TIME 1" >>confdefs.h
-
-fi
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for long long" >&5
-$as_echo_n "checking for long long... " >&6; }
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-long long i = 0; return (0);
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-		ISC_PLATFORM_HAVELONGLONG="#define ISC_PLATFORM_HAVELONGLONG 1"
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-		ISC_PLATFORM_HAVELONGLONG="#undef ISC_PLATFORM_HAVELONGLONG"
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-
-
-#
-# check for GCC noreturn attribute
-#
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for GCC noreturn attribute" >&5
-$as_echo_n "checking for GCC noreturn attribute... " >&6; }
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-void foo() __attribute__((noreturn));
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-		ISC_PLATFORM_NORETURN_PRE="#define ISC_PLATFORM_NORETURN_PRE"
-		ISC_PLATFORM_NORETURN_POST="#define ISC_PLATFORM_NORETURN_POST __attribute__((noreturn))"
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-		ISC_PLATFORM_NORETURN_PRE="#define ISC_PLATFORM_NORETURN_PRE"
-		ISC_PLATFORM_NORETURN_POST="#define ISC_PLATFORM_NORETURN_POST"
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-
-
-
-#
-# check if we have lifconf
-#
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for struct lifconf" >&5
-$as_echo_n "checking for struct lifconf... " >&6; }
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <net/if.h>
-
-int
-main ()
-{
-
-struct lifconf lifconf;
-lifconf.lifc_len = 0;
-
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-		ISC_PLATFORM_HAVELIFCONF="#define ISC_PLATFORM_HAVELIFCONF 1"
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-		ISC_PLATFORM_HAVELIFCONF="#undef ISC_PLATFORM_HAVELIFCONF"
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-
-
-#
-# check if we have kqueue
-#
-# Check whether --enable-kqueue was given.
-if test "${enable_kqueue+set}" = set; then :
-  enableval=$enable_kqueue; want_kqueue="$enableval"
-else
-  want_kqueue="yes"
-fi
-
-case $want_kqueue in
-yes)
-	ac_fn_c_check_func "$LINENO" "kqueue" "ac_cv_func_kqueue"
-if test "x$ac_cv_func_kqueue" = xyes; then :
-  ac_cv_have_kqueue=yes
-else
-  ac_cv_have_kqueue=no
-fi
-
-	case $ac_cv_have_kqueue in
-	yes)
-		ISC_PLATFORM_HAVEKQUEUE="#define ISC_PLATFORM_HAVEKQUEUE 1"
-		;;
-	*)
-		ISC_PLATFORM_HAVEKQUEUE="#undef ISC_PLATFORM_HAVEKQUEUE"
-		;;
-	esac
-	;;
-*)
-	ISC_PLATFORM_HAVEKQUEUE="#undef ISC_PLATFORM_HAVEKQUEUE"
-	;;
-esac
-
-
-#
-# check if we have epoll.  Linux kernel 2.4 has epoll_create() which fails,
-# so we need to try running the code, not just test its existence.
-#
-# Check whether --enable-epoll was given.
-if test "${enable_epoll+set}" = set; then :
-  enableval=$enable_epoll; want_epoll="$enableval"
-else
-  want_epoll="auto"
-fi
-
-case $want_epoll in
-auto)
-	{ $as_echo "$as_me:${as_lineno-$LINENO}: checking epoll support" >&5
-$as_echo_n "checking epoll support... " >&6; }
-	if test "$cross_compiling" = yes; then :
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-	ISC_PLATFORM_HAVEEPOLL="#undef ISC_PLATFORM_HAVEEPOLL"
-else
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-#include <sys/epoll.h>
-int main() {
-	if (epoll_create(1) < 0)
-		return (1);
-	return (0);
-}
-
-_ACEOF
-if ac_fn_c_try_run "$LINENO"; then :
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-	ISC_PLATFORM_HAVEEPOLL="#define ISC_PLATFORM_HAVEEPOLL 1"
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-	ISC_PLATFORM_HAVEEPOLL="#undef ISC_PLATFORM_HAVEEPOLL"
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
-  conftest.$ac_objext conftest.beam conftest.$ac_ext
-fi
-
-	;;
-yes)
-	ISC_PLATFORM_HAVEEPOLL="#define ISC_PLATFORM_HAVEEPOLL 1"
-	;;
-*)
-	ISC_PLATFORM_HAVEEPOLL="#undef ISC_PLATFORM_HAVEEPOLL"
-	;;
-esac
-
-
-#
-# check if we support /dev/poll
-#
-# Check whether --enable-devpoll was given.
-if test "${enable_devpoll+set}" = set; then :
-  enableval=$enable_devpoll; want_devpoll="$enableval"
-else
-  want_devpoll="yes"
-fi
-
-case $want_devpoll in
-yes)
-	for ac_header in sys/devpoll.h devpoll.h
-do :
-  as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
-if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
-  cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
- ISC_PLATFORM_HAVEDEVPOLL="#define ISC_PLATFORM_HAVEDEVPOLL 1"
-
-else
-  ISC_PLATFORM_HAVEDEVPOLL="#undef ISC_PLATFORM_HAVEDEVPOLL"
-
-fi
-
-done
-
-	;;
-*)
-	ISC_PLATFORM_HAVEDEVPOLL="#undef ISC_PLATFORM_HAVEDEVPOLL"
-	;;
-esac
-
-
-#
-# check if we need to #include sys/select.h explicitly
-#
-case $ac_cv_header_unistd_h in
-yes)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if unistd.h or sys/types.h defines fd_set" >&5
-$as_echo_n "checking if unistd.h or sys/types.h defines fd_set... " >&6; }
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-#include <sys/types.h> /* Ultrix */
-#include <unistd.h>
-int
-main ()
-{
-fd_set read_set; return (0);
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-	 ISC_PLATFORM_NEEDSYSSELECTH="#undef ISC_PLATFORM_NEEDSYSSELECTH"
-	 LWRES_PLATFORM_NEEDSYSSELECTH="#undef LWRES_PLATFORM_NEEDSYSSELECTH"
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-	case $ac_cv_header_sys_select_h in
-	yes)
-	 ISC_PLATFORM_NEEDSYSSELECTH="#define ISC_PLATFORM_NEEDSYSSELECTH 1"
-	 LWRES_PLATFORM_NEEDSYSSELECTH="#define LWRES_PLATFORM_NEEDSYSSELECTH 1"
-		;;
-	no)
-		as_fn_error $? "need either working unistd.h or sys/select.h" "$LINENO" 5
-		;;
-	esac
-
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-	;;
-no)
-	case $ac_cv_header_sys_select_h in
-	yes)
-	     ISC_PLATFORM_NEEDSYSSELECTH="#define ISC_PLATFORM_NEEDSYSSELECTH 1"
-	     LWRES_PLATFORM_NEEDSYSSELECTH="#define LWRES_PLATFORM_NEEDSYSSELECTH 1"
-		;;
-	no)
-		as_fn_error $? "need either unistd.h or sys/select.h" "$LINENO" 5
-		;;
-	esac
-	;;
-esac
-
-
-
-#
-# Find the machine's endian flavor.
-#
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether byte ordering is bigendian" >&5
-$as_echo_n "checking whether byte ordering is bigendian... " >&6; }
-if ${ac_cv_c_bigendian+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_cv_c_bigendian=unknown
-    # See if we're dealing with a universal compiler.
-    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#ifndef __APPLE_CC__
-	       not a universal capable compiler
-	     #endif
-	     typedef int dummy;
-
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-
-	# Check for potential -arch flags.  It is not universal unless
-	# there are at least two -arch flags with different values.
-	ac_arch=
-	ac_prev=
-	for ac_word in $CC $CFLAGS $CPPFLAGS $LDFLAGS; do
-	 if test -n "$ac_prev"; then
-	   case $ac_word in
-	     i?86 | x86_64 | ppc | ppc64)
-	       if test -z "$ac_arch" || test "$ac_arch" = "$ac_word"; then
-		 ac_arch=$ac_word
-	       else
-		 ac_cv_c_bigendian=universal
-		 break
-	       fi
-	       ;;
-	   esac
-	   ac_prev=
-	 elif test "x$ac_word" = "x-arch"; then
-	   ac_prev=arch
-	 fi
-       done
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-    if test $ac_cv_c_bigendian = unknown; then
-      # See if sys/param.h defines the BYTE_ORDER macro.
-      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include <sys/types.h>
-	     #include <sys/param.h>
-
-int
-main ()
-{
-#if ! (defined BYTE_ORDER && defined BIG_ENDIAN \
-		     && defined LITTLE_ENDIAN && BYTE_ORDER && BIG_ENDIAN \
-		     && LITTLE_ENDIAN)
-	      bogus endian macros
-	     #endif
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  # It does; now see whether it defined to BIG_ENDIAN or not.
-	 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include <sys/types.h>
-		#include <sys/param.h>
-
-int
-main ()
-{
-#if BYTE_ORDER != BIG_ENDIAN
-		 not big endian
-		#endif
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  ac_cv_c_bigendian=yes
-else
-  ac_cv_c_bigendian=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-    fi
-    if test $ac_cv_c_bigendian = unknown; then
-      # See if <limits.h> defines _LITTLE_ENDIAN or _BIG_ENDIAN (e.g., Solaris).
-      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include <limits.h>
-
-int
-main ()
-{
-#if ! (defined _LITTLE_ENDIAN || defined _BIG_ENDIAN)
-	      bogus endian macros
-	     #endif
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  # It does; now see whether it defined to _BIG_ENDIAN or not.
-	 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include <limits.h>
-
-int
-main ()
-{
-#ifndef _BIG_ENDIAN
-		 not big endian
-		#endif
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  ac_cv_c_bigendian=yes
-else
-  ac_cv_c_bigendian=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-    fi
-    if test $ac_cv_c_bigendian = unknown; then
-      # Compile a test program.
-      if test "$cross_compiling" = yes; then :
-  # Try to guess by grepping values from an object file.
-	 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-short int ascii_mm[] =
-		  { 0x4249, 0x4765, 0x6E44, 0x6961, 0x6E53, 0x7953, 0 };
-		short int ascii_ii[] =
-		  { 0x694C, 0x5454, 0x656C, 0x6E45, 0x6944, 0x6E61, 0 };
-		int use_ascii (int i) {
-		  return ascii_mm[i] + ascii_ii[i];
-		}
-		short int ebcdic_ii[] =
-		  { 0x89D3, 0xE3E3, 0x8593, 0x95C5, 0x89C4, 0x9581, 0 };
-		short int ebcdic_mm[] =
-		  { 0xC2C9, 0xC785, 0x95C4, 0x8981, 0x95E2, 0xA8E2, 0 };
-		int use_ebcdic (int i) {
-		  return ebcdic_mm[i] + ebcdic_ii[i];
-		}
-		extern int foo;
-
-int
-main ()
-{
-return use_ascii (foo) == use_ebcdic (foo);
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  if grep BIGenDianSyS conftest.$ac_objext >/dev/null; then
-	      ac_cv_c_bigendian=yes
-	    fi
-	    if grep LiTTleEnDian conftest.$ac_objext >/dev/null ; then
-	      if test "$ac_cv_c_bigendian" = unknown; then
-		ac_cv_c_bigendian=no
-	      else
-		# finding both strings is unlikely to happen, but who knows?
-		ac_cv_c_bigendian=unknown
-	      fi
-	    fi
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-else
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-
-	     /* Are we little or big endian?  From Harbison&Steele.  */
-	     union
-	     {
-	       long int l;
-	       char c[sizeof (long int)];
-	     } u;
-	     u.l = 1;
-	     return u.c[sizeof (long int) - 1] == 1;
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_run "$LINENO"; then :
-  ac_cv_c_bigendian=no
-else
-  ac_cv_c_bigendian=yes
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
-  conftest.$ac_objext conftest.beam conftest.$ac_ext
-fi
-
-    fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_bigendian" >&5
-$as_echo "$ac_cv_c_bigendian" >&6; }
- case $ac_cv_c_bigendian in #(
-   yes)
-     $as_echo "#define WORDS_BIGENDIAN 1" >>confdefs.h
-;; #(
-   no)
-      ;; #(
-   universal)
-
-$as_echo "#define AC_APPLE_UNIVERSAL_BUILD 1" >>confdefs.h
-
-     ;; #(
-   *)
-     as_fn_error $? "unknown endianness
- presetting ac_cv_c_bigendian=no (or yes) will help" "$LINENO" 5 ;;
- esac
-
-
-#
-# was --with-openssl specified?
-#
-OPENSSL_WARNING=
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for OpenSSL library" >&5
-$as_echo_n "checking for OpenSSL library... " >&6; }
-
-# Check whether --with-openssl was given.
-if test "${with_openssl+set}" = set; then :
-  withval=$with_openssl; use_openssl="$withval"
-else
-  use_openssl="auto"
-fi
-
-
-openssldirs="/usr /usr/local /usr/local/ssl /usr/pkg /usr/sfw"
-if test "$use_openssl" = "auto"
-then
-	for d in $openssldirs
-	do
-		if test -f $d/include/openssl/opensslv.h
-		then
-			use_openssl=$d
-			break
-		fi
-	done
-fi
-OPENSSL_ECDSA=""
-OPENSSL_GOST=""
-case "$use_openssl" in
-	no)
-		{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-		DST_OPENSSL_INC=""
-		USE_OPENSSL=""
-		OPENSSLGOSTLINKOBJS=""
-		OPENSSLGOSTLINKSRS=""
-		OPENSSLLINKOBJS=""
-		OPENSSLLINKSRCS=""
-		;;
-	auto)
-		DST_OPENSSL_INC=""
-		USE_OPENSSL=""
-		OPENSSLGOSTLINKOBJS=""
-		OPENSSLGOSTLINKSRS=""
-		OPENSSLLINKOBJS=""
-		OPENSSLLINKSRCS=""
-		as_fn_error $? "OpenSSL was not found in any of $openssldirs; use --with-openssl=/path
-If you don't want OpenSSL, use --without-openssl" "$LINENO" 5
-		;;
-	*)
-		if test "$use_openssl" = "yes"
-		then
-			# User did not specify a path - guess it
-			for d in $openssldirs
-			do
-				if test -f $d/include/openssl/opensslv.h
-				then
-					use_openssl=$d
-					break
-				fi
-			done
-			if test "$use_openssl" = "yes"
-			then
-				{ $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
-				as_fn_error $? "OpenSSL was not found in any of $openssldirs; use --with-openssl=/path" "$LINENO" 5
-			fi
-		elif ! test -f "$use_openssl"/include/openssl/opensslv.h
-		then
-			as_fn_error $? "\"$use_openssl/include/openssl/opensslv.h\" not found" "$LINENO" 5
-		fi
-		USE_OPENSSL='-DOPENSSL'
-		if test "$use_openssl" = "/usr"
-		then
-			DST_OPENSSL_INC=""
-			DNS_OPENSSL_LIBS="-lcrypto"
-		else
-			DST_OPENSSL_INC="-I$use_openssl/include"
-			case $host in
-			*-solaris*)
-				DNS_OPENSSL_LIBS="-L$use_openssl/lib -R$use_openssl/lib -lcrypto"
-				;;
-			*-hp-hpux*)
-				DNS_OPENSSL_LIBS="-L$use_openssl/lib -Wl,+b: -lcrypto"
-				;;
-			*-apple-darwin*)
-				#
-				# Apple's ld seaches for serially for dynamic
-				# then static libraries.  This means you can't
-				# use -L to override dynamic system libraries
-				# with static ones when linking.  Instead
-				# we specify a absolute path.
-				#
-				if test -f "$use_openssl/lib/libcrypto.dylib"
-				then
-					DNS_OPENSSL_LIBS="-L$use_openssl/lib -lcrypto"
-				else
-					DNS_OPENSSL_LIBS="$use_openssl/lib/libcrypto.a"
-				fi
-				;;
-			*)
-				DNS_OPENSSL_LIBS="-L$use_openssl/lib -lcrypto"
-				;;
-			esac
-		fi
-		{ $as_echo "$as_me:${as_lineno-$LINENO}: result: using OpenSSL from $use_openssl/lib and $use_openssl/include" >&5
-$as_echo "using OpenSSL from $use_openssl/lib and $use_openssl/include" >&6; }
-
-		saved_cflags="$CFLAGS"
-		saved_libs="$LIBS"
-		CFLAGS="$CFLAGS $DST_OPENSSL_INC"
-		LIBS="$LIBS $DNS_OPENSSL_LIBS"
-		{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether linking with OpenSSL works" >&5
-$as_echo_n "checking whether linking with OpenSSL works... " >&6; }
-		if test "$cross_compiling" = yes; then :
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: assuming it does work on target platform" >&5
-$as_echo "assuming it does work on target platform" >&6; }
-else
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-#include <openssl/err.h>
-int main() {
-	ERR_clear_error();
-	return (0);
-}
-
-_ACEOF
-if ac_fn_c_try_run "$LINENO"; then :
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-		 as_fn_error $? "Could not run test program using OpenSSL from
-$use_openssl/lib and $use_openssl/include.
-Please check the argument to --with-openssl and your
-shared library configuration (e.g., LD_LIBRARY_PATH)." "$LINENO" 5
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
-  conftest.$ac_objext conftest.beam conftest.$ac_ext
-fi
-
-
-		{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether linking with OpenSSL requires -ldl" >&5
-$as_echo_n "checking whether linking with OpenSSL requires -ldl... " >&6; }
-		cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-#include <openssl/err.h>
-int
-main ()
-{
- DSO_METHOD_dlfcn();
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-else
-  LIBS="$LIBS -ldl"
-		cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-#include <openssl/err.h>
-
-int
-main ()
-{
- DSO_METHOD_dlfcn();
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-		DNS_OPENSSL_LIBS="$DNS_OPENSSL_LIBS -ldl"
-
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: unknown" >&5
-$as_echo "unknown" >&6; }
-		 as_fn_error $? "OpenSSL has unsupported dynamic loading" "$LINENO" 5
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-
-# Check whether --enable-openssl-version-check was given.
-if test "${enable_openssl_version_check+set}" = set; then :
-  enableval=$enable_openssl_version_check;
-fi
-
-case "$enable_openssl_version_check" in
-yes|'')
-		{ $as_echo "$as_me:${as_lineno-$LINENO}: checking OpenSSL library version" >&5
-$as_echo_n "checking OpenSSL library version... " >&6; }
-		if test "$cross_compiling" = yes; then :
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: assuming target platform has compatible version" >&5
-$as_echo "assuming target platform has compatible version" >&6; }
-else
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-#include <stdio.h>
-#include <openssl/opensslv.h>
-int main() {
-	if ((OPENSSL_VERSION_NUMBER >= 0x009070cfL &&
-	     OPENSSL_VERSION_NUMBER < 0x00908000L) ||
-	     OPENSSL_VERSION_NUMBER >= 0x0090804fL)
-		return (0);
-	printf("\n\nFound   OPENSSL_VERSION_NUMBER %#010x\n",
-		OPENSSL_VERSION_NUMBER);
-	printf("Require OPENSSL_VERSION_NUMBER 0x009070cf or greater (0.9.7l)\n"
-	       "Require OPENSSL_VERSION_NUMBER 0x0090804f or greater (0.9.8d)\n\n");
-	return (1);
-}
-
-_ACEOF
-if ac_fn_c_try_run "$LINENO"; then :
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
-$as_echo "ok" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: not compatible" >&5
-$as_echo "not compatible" >&6; }
-		 OPENSSL_WARNING=yes
-
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
-  conftest.$ac_objext conftest.beam conftest.$ac_ext
-fi
-
-;;
-no)
-	{ $as_echo "$as_me:${as_lineno-$LINENO}: result: Skipped OpenSSL version check" >&5
-$as_echo "Skipped OpenSSL version check" >&6; }
-;;
-esac
-
-        { $as_echo "$as_me:${as_lineno-$LINENO}: checking for OpenSSL DSA support" >&5
-$as_echo_n "checking for OpenSSL DSA support... " >&6; }
-        if test -f $use_openssl/include/openssl/dsa.h
-        then
-                $as_echo "#define HAVE_OPENSSL_DSA 1" >>confdefs.h
-
-                { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-        else
-                { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-        fi
-
-        for ac_func in EVP_sha256 EVP_sha384 EVP_sha512
-do :
-  as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
-ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
-if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
-  cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-done
-
-
-        { $as_echo "$as_me:${as_lineno-$LINENO}: checking for OpenSSL ECDSA support" >&5
-$as_echo_n "checking for OpenSSL ECDSA support... " >&6; }
-        have_ecdsa=""
-        if test "$cross_compiling" = yes; then :
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: using --with-ecdsa" >&5
-$as_echo "using --with-ecdsa" >&6; }
-else
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-#include <stdio.h>
-#include <openssl/ecdsa.h>
-#include <openssl/objects.h>
-int main() {
-	EC_KEY *ec256, *ec384;
-
-#if !defined(HAVE_EVP_SHA256) || !defined(HAVE_EVP_SHA384)
-	return (1);
-#endif
-	ec256 = EC_KEY_new_by_curve_name(NID_X9_62_prime256v1);
-	ec384 = EC_KEY_new_by_curve_name(NID_secp384r1);
-	if (ec256 == NULL || ec384 == NULL)
-		return (2);
-	return (0);
-}
-
-_ACEOF
-if ac_fn_c_try_run "$LINENO"; then :
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-        have_ecdsa="yes"
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-        have_ecdsa="no"
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
-  conftest.$ac_objext conftest.beam conftest.$ac_ext
-fi
-
-
-# Check whether --with-ecdsa was given.
-if test "${with_ecdsa+set}" = set; then :
-  withval=$with_ecdsa; with_ecdsa="$withval"
-else
-  with_ecdsa="auto"
-fi
-
-        case "$with_ecdsa" in
-        yes)
-            case "$have_ecdsa" in
-            no)  as_fn_error $? "ecdsa not supported" "$LINENO" 5 ;;
-            *)  have_ecdsa=yes ;;
-            esac
-            ;;
-        no)
-            have_ecdsa=no ;;
-        *)
-            case "$have_ecdsa" in
-            yes|no) ;;
-            *) as_fn_error $? "need --with-ecdsa=[yes or no]" "$LINENO" 5 ;;
-            esac
-            ;;
-        esac
-        case $have_ecdsa in
-        yes)
-                OPENSSL_ECDSA="yes"
-
-$as_echo "#define HAVE_OPENSSL_ECDSA 1" >>confdefs.h
-
-                ;;
-        *)
-                ;;
-        esac
-
-        { $as_echo "$as_me:${as_lineno-$LINENO}: checking for OpenSSL GOST support" >&5
-$as_echo_n "checking for OpenSSL GOST support... " >&6; }
-        have_gost=""
-        if test "$cross_compiling" = yes; then :
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: using --with-gost" >&5
-$as_echo "using --with-gost" >&6; }
-else
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-#include <openssl/conf.h>
-#include <openssl/engine.h>
-int main() {
-#if (OPENSSL_VERSION_NUMBER >= 0x10000000L)
-	ENGINE *e;
-	EC_KEY *ek;
-
-	ek = NULL;
-	OPENSSL_config(NULL);
-
-	e = ENGINE_by_id("gost");
-	if (e == NULL)
-		return (1);
-	if (ENGINE_init(e) <= 0)
-		return (1);
-	return (0);
-#else
-	return (1);
-#endif
-}
-
-_ACEOF
-if ac_fn_c_try_run "$LINENO"; then :
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-        have_gost="yes"
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-        have_gost="no"
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
-  conftest.$ac_objext conftest.beam conftest.$ac_ext
-fi
-
-
-# Check whether --with-gost was given.
-if test "${with_gost+set}" = set; then :
-  withval=$with_gost; with_gost="$withval"
-else
-  with_gost="auto"
-fi
-
-        case "$with_gost" in
-        yes)
-            case "$have_gost" in
-            no)  as_fn_error $? "gost not supported" "$LINENO" 5 ;;
-            *)  have_gost=yes ;;
-            esac
-            ;;
-        no)
-            have_gost=no ;;
-        *)
-            case "$have_gost" in
-            yes|no) ;;
-            *) as_fn_error $? "need --with-gost=[yes or no]" "$LINENO" 5 ;;
-            esac
-            ;;
-        esac
-        case $have_gost in
-        yes)
-		OPENSSL_GOST="yes"
-		OPENSSLGOSTLINKOBJS='${OPENSSLGOSTLINKOBJS}'
-		OPENSSLGOSTLINKSRCS='${OPENSSLGOSTLINKSRCS}'
-
-$as_echo "#define HAVE_OPENSSL_GOST 1" >>confdefs.h
-
-		;;
-        *)
-                ;;
-        esac
-        CFLAGS="$saved_cflags"
-        LIBS="$saved_libs"
-        OPENSSLLINKOBJS='${OPENSSLLINKOBJS}'
-        OPENSSLLINKSRCS='${OPENSSLLINKSRCS}'
-
-        ;;
-esac
-
-#
-# This would include the system openssl path (and linker options to use
-# it as needed) if it is found.
-#
-
-
-
-
-
-
-
-
-
-
-DNS_CRYPTO_LIBS="$DNS_CRYPTO_LIBS $DNS_OPENSSL_LIBS"
-
-#
-# Use OpenSSL for hash functions
-#
-
-# Check whether --enable-openssl-hash was given.
-if test "${enable_openssl_hash+set}" = set; then :
-  enableval=$enable_openssl_hash; want_openssl_hash="$enableval"
-else
-  want_openssl_hash="no"
-fi
-
-case $want_openssl_hash in
-	yes)
-		if test "$USE_OPENSSL" = ""
-		then
-			as_fn_error $? "No OpenSSL for hash functions" "$LINENO" 5
-		fi
-		ISC_PLATFORM_OPENSSLHASH="#define ISC_PLATFORM_OPENSSLHASH 1"
-		ISC_OPENSSL_INC="$DST_OPENSSL_INC"
-		;;
-	no)
-		ISC_PLATFORM_OPENSSLHASH="#undef ISC_PLATFORM_OPENSSLHASH"
-		ISC_OPENSSL_INC=""
-		;;
-esac
-
-
-
-#
-# PKCS11 (aka crypto hardware) support
-#
-# This works only with the right OpenSSL with PKCS11 engine!
-#
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for PKCS11 support" >&5
-$as_echo_n "checking for PKCS11 support... " >&6; }
-
-# Check whether --with-pkcs11 was given.
-if test "${with_pkcs11+set}" = set; then :
-  withval=$with_pkcs11; use_pkcs11="$withval"
-else
-  use_pkcs11="no"
-fi
-
-
-case "$use_pkcs11" in
-	no|'')
-		{ $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
-		USE_PKCS11=''
-		PKCS11_TOOLS=''
-		;;
-	yes|*)
-		{ $as_echo "$as_me:${as_lineno-$LINENO}: result: using OpenSSL with PKCS11 support" >&5
-$as_echo "using OpenSSL with PKCS11 support" >&6; }
-		USE_PKCS11='-DUSE_PKCS11'
-		PKCS11_TOOLS=pkcs11
-		;;
-esac
-
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for PKCS11 tools" >&5
-$as_echo_n "checking for PKCS11 tools... " >&6; }
-case "$use_pkcs11" in
-	no|yes|'')
-		{ $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
-		PKCS11_PROVIDER="undefined"
-		;;
-       *)
-		{ $as_echo "$as_me:${as_lineno-$LINENO}: result: PKCS11 provider is \"$use_pkcs11\"" >&5
-$as_echo "PKCS11 provider is \"$use_pkcs11\"" >&6; }
-		PKCS11_PROVIDER="$use_pkcs11"
-		;;
-esac
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for GSSAPI library" >&5
-$as_echo_n "checking for GSSAPI library... " >&6; }
-
-# Check whether --with-gssapi was given.
-if test "${with_gssapi+set}" = set; then :
-  withval=$with_gssapi; use_gssapi="$withval"
-else
-  use_gssapi="yes"
-fi
-
-
-# gssapi is just the framework, we really require kerberos v5, so
-# look for those headers (the gssapi headers must be there, too)
-# The problem with this implementation is that it doesn't allow
-# for the specification of gssapi and krb5 headers in different locations,
-# which probably ought to be fixed although fixing might raise the issue of
-# trying to build with incompatible versions of gssapi and krb5.
-if test "$use_gssapi" = "yes"
-then
-	# first, deal with the obvious
-	if test \( -f /usr/include/kerberosv5/krb5.h -o \
-		   -f /usr/include/krb5/krb5.h -o \
-		   -f /usr/include/krb5.h \)   -a \
-		\( -f /usr/include/gssapi.h -o \
-		   -f /usr/include/gssapi/gssapi.h \)
-	then
-		use_gssapi=/usr
-	else
-	    krb5dirs="/usr/local /usr/local/krb5 /usr/local/kerberosv5 /usr/local/kerberos /usr/pkg /usr/krb5 /usr/kerberosv5 /usr/kerberos /usr"
-	    for d in $krb5dirs
-	    do
-		if test -f $d/include/gssapi/gssapi_krb5.h -o \
-		        -f $d/include/krb5.h
-		then
-			if test -f $d/include/gssapi/gssapi.h -o \
-			        -f $d/include/gssapi.h
-			then
-				use_gssapi=$d
-				break
-			fi
-		fi
-		use_gssapi="no"
-	    done
-	fi
-fi
-
-case "$use_gssapi" in
-	no)
-		{ $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
-		USE_GSSAPI=''
-		;;
-	yes)
-		as_fn_error $? "--with-gssapi must specify a path" "$LINENO" 5
-		;;
-	*)
-		{ $as_echo "$as_me:${as_lineno-$LINENO}: result: looking in $use_gssapi/lib" >&5
-$as_echo "looking in $use_gssapi/lib" >&6; }
-		USE_GSSAPI='-DGSSAPI'
-		saved_cppflags="$CPPFLAGS"
-		CPPFLAGS="-I$use_gssapi/include $CPPFLAGS"
-		for ac_header in gssapi.h gssapi/gssapi.h
-do :
-  as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
-if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
-  cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
- ISC_PLATFORM_GSSAPIHEADER="#define ISC_PLATFORM_GSSAPIHEADER <$ac_header>"
-fi
-
-done
-
-
-		if test "$ISC_PLATFORM_GSSAPIHEADER" = ""; then
-		    as_fn_error $? "gssapi.h not found" "$LINENO" 5
-		fi
-
-		for ac_header in gssapi_krb5.h gssapi/gssapi_krb5.h
-do :
-  as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
-if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
-  cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
- ISC_PLATFORM_GSSAPI_KRB5_HEADER="#define ISC_PLATFORM_GSSAPI_KRB5_HEADER <$ac_header>"
-fi
-
-done
-
-
-		for ac_header in krb5.h krb5/krb5.h kerberosv5/krb5.h
-do :
-  as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
-if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
-  cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
- ISC_PLATFORM_KRB5HEADER="#define ISC_PLATFORM_KRB5HEADER <$ac_header>"
-fi
-
-done
-
-
-		if test "$ISC_PLATFORM_KRB5HEADER" = ""; then
-		    as_fn_error $? "krb5.h not found" "$LINENO" 5
-		fi
-
-		CPPFLAGS="$saved_cppflags"
-
-		#
-		# XXXDCL This probably doesn't work right on all systems.
-		# It will need to be worked on as problems become evident.
-		#
-		# Essentially the problems here relate to two different
-		# areas.  The first area is building with either KTH
-		# or MIT Kerberos, particularly when both are present on
-		# the machine.  The other is static versus dynamic linking.
-		#
-		# On the KTH vs MIT issue, Both have libkrb5 that can mess
-		# up the works if one implementation ends up trying to
-		# use the other's krb.  This is unfortunately a situation
-		# that very easily arises.
-		#
-		# Dynamic linking when the dependency information is built
-		# into MIT's libgssapi_krb5 or KTH's libgssapi magically makes
-		# all such problems go away, but when that setup is not
-		# present, because either the dynamic libraries lack
-		# dependencies or static linking is being done, then the
-		# problems start to show up.
-		saved_libs="$LIBS"
-		for TRY_LIBS in \
-		    "-lgssapi_krb5" \
-		    "-lgssapi_krb5 -lkrb5 -lk5crypto -lcom_err" \
-		    "-lgssapi_krb5 -lkrb5 -lk5crypto -lcom_err -lresolv" \
-		    "-lgssapi" \
-		    "-lgssapi -lkrb5 -ldes -lcrypt -lasn1 -lroken -lcom_err" \
-		    "-lgssapi -lkrb5 -lcrypto -lcrypt -lasn1 -lroken -lcom_err" \
-		    "-lgss -lkrb5"
-		do
-		    # Note that this does not include $saved_libs, because
-		    # on FreeBSD machines this configure script has added
-		    # -L/usr/local/lib to LIBS, which can make the
-		    # -lgssapi_krb5 test succeed with shared libraries even
-		    # when you are trying to build with KTH in /usr/lib.
-		    if test "$use_gssapi" = "/usr"
-		    then
-			    LIBS="$TRY_LIBS"
-		    else
-			    LIBS="-L$use_gssapi/lib $TRY_LIBS"
-		    fi
-		    { $as_echo "$as_me:${as_lineno-$LINENO}: checking linking as $TRY_LIBS" >&5
-$as_echo_n "checking linking as $TRY_LIBS... " >&6; }
-		    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-gss_acquire_cred();krb5_init_context()
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-  gssapi_linked=yes
-else
-  gssapi_linked=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-		    case $gssapi_linked in
-		    yes) { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }; break ;;
-		    no)  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; } ;;
-		    esac
-		done
-
-		case $gssapi_linked in
-		no) as_fn_error $? "could not determine proper GSSAPI linkage" "$LINENO" 5 ;;
-		esac
-
-		#
-		# XXXDCL Major kludge.  Tries to cope with KTH in /usr/lib
-		# but MIT in /usr/local/lib and trying to build with KTH.
-		# /usr/local/lib can end up earlier on the link lines.
-		# Like most kludges, this one is not only inelegant it
-		# is also likely to be the wrong thing to do at least as
-		# many times as it is the right thing.  Something better
-		# needs to be done.
-		#
-		if test "$use_gssapi" = "/usr" -a \
-			-f /usr/local/lib/libkrb5.a; then
-		    FIX_KTH_VS_MIT=yes
-		fi
-
-		case "$FIX_KTH_VS_MIT" in
-		yes)
-		    case "$enable_static_linking" in
-		    yes) gssapi_lib_suffix=".a"  ;;
-		    *)   gssapi_lib_suffix=".so" ;;
-		    esac
-
-		    for lib in $LIBS; do
-			case $lib in
-			-L*)
-			    ;;
-			-l*)
-			    new_lib=`echo $lib |
-				     sed -e s%^-l%$use_gssapi/lib/lib% \
-					 -e s%$%$gssapi_lib_suffix%`
-			    NEW_LIBS="$NEW_LIBS $new_lib"
-			    ;;
-			*)
-			   as_fn_error $? "KTH vs MIT Kerberos confusion!" "$LINENO" 5
-			    ;;
-			esac
-		    done
-		    LIBS="$NEW_LIBS"
-		    ;;
-		esac
-
-		DST_GSSAPI_INC="-I$use_gssapi/include"
-		DNS_GSSAPI_LIBS="$LIBS"
-
-		{ $as_echo "$as_me:${as_lineno-$LINENO}: result: using GSSAPI from $use_gssapi/lib and $use_gssapi/include" >&5
-$as_echo "using GSSAPI from $use_gssapi/lib and $use_gssapi/include" >&6; }
-		LIBS="$saved_libs"
-		;;
-esac
-
-
-
-
-
-
-
-
-
-DNS_CRYPTO_LIBS="$DNS_GSSAPI_LIBS $DNS_CRYPTO_LIBS"
-
-#
-# Applications linking with libdns also need to link with these libraries.
-#
-
-
-
-#
-# was --with-randomdev specified?
-#
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for random device" >&5
-$as_echo_n "checking for random device... " >&6; }
-
-# Check whether --with-randomdev was given.
-if test "${with_randomdev+set}" = set; then :
-  withval=$with_randomdev; use_randomdev="$withval"
-else
-  use_randomdev="unspec"
-fi
-
-
-case "$use_randomdev" in
-	unspec)
-		case "$cross_compiling" in
-		yes)
-			{ $as_echo "$as_me:${as_lineno-$LINENO}: result: unspecified" >&5
-$as_echo "unspecified" >&6; }
-			as_fn_error $? " need --with-randomdev=PATH or --with-randomdev=no" "$LINENO" 5
-		esac
-		case "$host" in
-			*-openbsd*)
-				devrandom=/dev/arandom
-				;;
-			*)
-				devrandom=/dev/random
-				;;
-		esac
-		{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $devrandom" >&5
-$as_echo "$devrandom" >&6; }
-		as_ac_File=`$as_echo "ac_cv_file_$devrandom" | $as_tr_sh`
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $devrandom" >&5
-$as_echo_n "checking for $devrandom... " >&6; }
-if eval \${$as_ac_File+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  test "$cross_compiling" = yes &&
-  as_fn_error $? "cannot check for file existence when cross compiling" "$LINENO" 5
-if test -r "$devrandom"; then
-  eval "$as_ac_File=yes"
-else
-  eval "$as_ac_File=no"
-fi
-fi
-eval ac_res=\$$as_ac_File
-	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-if eval test \"x\$"$as_ac_File"\" = x"yes"; then :
-  cat >>confdefs.h <<_ACEOF
-#define PATH_RANDOMDEV "$devrandom"
-_ACEOF
-
-fi
-
-
-		;;
-	yes)
-		as_fn_error $? "--with-randomdev must specify a path" "$LINENO" 5
-		;;
-	no)
-		{ $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
-		;;
-	*)
-		cat >>confdefs.h <<_ACEOF
-#define PATH_RANDOMDEV "$use_randomdev"
-_ACEOF
-
-		{ $as_echo "$as_me:${as_lineno-$LINENO}: result: using \"$use_randomdev\"" >&5
-$as_echo "using \"$use_randomdev\"" >&6; }
-		;;
-esac
-
-#
-# Do we have arc4random() ?
-#
-ac_fn_c_check_func "$LINENO" "arc4random" "ac_cv_func_arc4random"
-if test "x$ac_cv_func_arc4random" = xyes; then :
-  $as_echo "#define HAVE_ARC4RANDOM 1" >>confdefs.h
-
-fi
-
-
-#
-# Begin pthreads checking.
-#
-# First, decide whether to use multithreading or not.
-#
-# Enable multithreading by default on systems where it is known
-# to work well, and where debugging of multithreaded programs
-# is supported.
-#
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with thread support" >&5
-$as_echo_n "checking whether to build with thread support... " >&6; }
-
-case $host in
-*-dec-osf*)
-	use_threads=true ;;
-*-solaris2.[0-6])
-	# Thread signals are broken on Solaris 2.6; they are sometimes
-	# delivered to the wrong thread.
-	use_threads=false ;;
-*-solaris*)
-	use_threads=true ;;
-*-ibm-aix*)
-	use_threads=true ;;
-*-hp-hpux10*)
-	use_threads=false ;;
-*-hp-hpux11*)
-	use_threads=true ;;
-*-sgi-irix*)
-	use_threads=true ;;
-*-sco-sysv*uw*|*-*-sysv*UnixWare*)
-        # UnixWare
-	use_threads=false ;;
-*-*-sysv*OpenUNIX*)
-        # UnixWare
-	use_threads=true ;;
-*-netbsd[1234].*)
-	# NetBSD earlier than NetBSD 5.0 has poor pthreads.
-	#  Don't use it by default.
-	use_threads=false ;;
-*-netbsd*)
-	use_threads=true ;;
-*-openbsd*)
-	# OpenBSD users have reported that named dumps core on
-	# startup when built with threads.
-	use_threads=false ;;
-*-freebsd*)
-	use_threads=false ;;
-*-bsdi[234]*)
-	# Thread signals do not work reliably on some versions of BSD/OS.
-	use_threads=false ;;
-*-bsdi5*)
-	use_threads=true ;;
-*-linux*)
-   	# Threads are disabled on Linux by default because most
-	# Linux kernels produce unusable core dumps from multithreaded
-	# programs, and because of limitations in setuid().
-	use_threads=false ;;
-*)
-	use_threads=false ;;
-esac
-
-# Check whether --enable-threads was given.
-if test "${enable_threads+set}" = set; then :
-  enableval=$enable_threads;
-fi
-
-case "$enable_threads" in
-	yes)
-		use_threads=true
-		;;
-	no)
-		use_threads=false
-		;;
-	'')
-		# Use system-dependent default
-		;;
-	*)
-	    	as_fn_error $? "--enable-threads takes yes or no" "$LINENO" 5
-		;;
-esac
-
-if $use_threads
-then
-	{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-else
-	{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-if $use_threads
-then
-	#
-	# Search for / configure pthreads in a system-dependent fashion.
-	#
-	case "$host" in
-		*-freebsd*)
-			# We don't want to set -lpthread as that break
-			# the ability to choose threads library at final
-			# link time and is not valid for all architectures.
-
-			PTHREAD=
-			if test "X$GCC" = "Xyes"; then
-				saved_cc="$CC"
-				CC="$CC -pthread"
-				{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for gcc -pthread support" >&5
-$as_echo_n "checking for gcc -pthread support... " >&6; };
-				cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include <pthread.h>
-int
-main ()
-{
-printf("%x\n", pthread_create);
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-  PTHREAD="yes"
-					    { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-				CC="$saved_cc"
-			fi
-			if test "X$PTHREAD" != "Xyes"; then
-				{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for pthread_create in -lpthread" >&5
-$as_echo_n "checking for pthread_create in -lpthread... " >&6; }
-if ${ac_cv_lib_pthread_pthread_create+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lpthread  $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char pthread_create ();
-int
-main ()
-{
-return pthread_create ();
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-  ac_cv_lib_pthread_pthread_create=yes
-else
-  ac_cv_lib_pthread_pthread_create=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_pthread_pthread_create" >&5
-$as_echo "$ac_cv_lib_pthread_pthread_create" >&6; }
-if test "x$ac_cv_lib_pthread_pthread_create" = xyes; then :
-  cat >>confdefs.h <<_ACEOF
-#define HAVE_LIBPTHREAD 1
-_ACEOF
-
-  LIBS="-lpthread $LIBS"
-
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for thread_create in -lthr" >&5
-$as_echo_n "checking for thread_create in -lthr... " >&6; }
-if ${ac_cv_lib_thr_thread_create+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lthr  $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char thread_create ();
-int
-main ()
-{
-return thread_create ();
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-  ac_cv_lib_thr_thread_create=yes
-else
-  ac_cv_lib_thr_thread_create=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_thr_thread_create" >&5
-$as_echo "$ac_cv_lib_thr_thread_create" >&6; }
-if test "x$ac_cv_lib_thr_thread_create" = xyes; then :
-  cat >>confdefs.h <<_ACEOF
-#define HAVE_LIBTHR 1
-_ACEOF
-
-  LIBS="-lthr $LIBS"
-
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for pthread_create in -lc_r" >&5
-$as_echo_n "checking for pthread_create in -lc_r... " >&6; }
-if ${ac_cv_lib_c_r_pthread_create+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lc_r  $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char pthread_create ();
-int
-main ()
-{
-return pthread_create ();
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-  ac_cv_lib_c_r_pthread_create=yes
-else
-  ac_cv_lib_c_r_pthread_create=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_c_r_pthread_create" >&5
-$as_echo "$ac_cv_lib_c_r_pthread_create" >&6; }
-if test "x$ac_cv_lib_c_r_pthread_create" = xyes; then :
-  cat >>confdefs.h <<_ACEOF
-#define HAVE_LIBC_R 1
-_ACEOF
-
-  LIBS="-lc_r $LIBS"
-
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for pthread_create in -lc" >&5
-$as_echo_n "checking for pthread_create in -lc... " >&6; }
-if ${ac_cv_lib_c_pthread_create+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lc  $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char pthread_create ();
-int
-main ()
-{
-return pthread_create ();
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-  ac_cv_lib_c_pthread_create=yes
-else
-  ac_cv_lib_c_pthread_create=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_c_pthread_create" >&5
-$as_echo "$ac_cv_lib_c_pthread_create" >&6; }
-if test "x$ac_cv_lib_c_pthread_create" = xyes; then :
-  cat >>confdefs.h <<_ACEOF
-#define HAVE_LIBC 1
-_ACEOF
-
-  LIBS="-lc $LIBS"
-
-else
-  as_fn_error $? "\"could not find thread libraries\"" "$LINENO" 5
-fi
-
-fi
-
-fi
-
-fi
-
-			fi
-			;;
-		*)
-			{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for pthread_create in -lpthread" >&5
-$as_echo_n "checking for pthread_create in -lpthread... " >&6; }
-if ${ac_cv_lib_pthread_pthread_create+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lpthread  $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char pthread_create ();
-int
-main ()
-{
-return pthread_create ();
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-  ac_cv_lib_pthread_pthread_create=yes
-else
-  ac_cv_lib_pthread_pthread_create=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_pthread_pthread_create" >&5
-$as_echo "$ac_cv_lib_pthread_pthread_create" >&6; }
-if test "x$ac_cv_lib_pthread_pthread_create" = xyes; then :
-  cat >>confdefs.h <<_ACEOF
-#define HAVE_LIBPTHREAD 1
-_ACEOF
-
-  LIBS="-lpthread $LIBS"
-
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for __pthread_create in -lpthread" >&5
-$as_echo_n "checking for __pthread_create in -lpthread... " >&6; }
-if ${ac_cv_lib_pthread___pthread_create+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lpthread  $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char __pthread_create ();
-int
-main ()
-{
-return __pthread_create ();
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-  ac_cv_lib_pthread___pthread_create=yes
-else
-  ac_cv_lib_pthread___pthread_create=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_pthread___pthread_create" >&5
-$as_echo "$ac_cv_lib_pthread___pthread_create" >&6; }
-if test "x$ac_cv_lib_pthread___pthread_create" = xyes; then :
-  cat >>confdefs.h <<_ACEOF
-#define HAVE_LIBPTHREAD 1
-_ACEOF
-
-  LIBS="-lpthread $LIBS"
-
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for __pthread_create_system in -lpthread" >&5
-$as_echo_n "checking for __pthread_create_system in -lpthread... " >&6; }
-if ${ac_cv_lib_pthread___pthread_create_system+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lpthread  $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char __pthread_create_system ();
-int
-main ()
-{
-return __pthread_create_system ();
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-  ac_cv_lib_pthread___pthread_create_system=yes
-else
-  ac_cv_lib_pthread___pthread_create_system=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_pthread___pthread_create_system" >&5
-$as_echo "$ac_cv_lib_pthread___pthread_create_system" >&6; }
-if test "x$ac_cv_lib_pthread___pthread_create_system" = xyes; then :
-  cat >>confdefs.h <<_ACEOF
-#define HAVE_LIBPTHREAD 1
-_ACEOF
-
-  LIBS="-lpthread $LIBS"
-
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for pthread_create in -lc_r" >&5
-$as_echo_n "checking for pthread_create in -lc_r... " >&6; }
-if ${ac_cv_lib_c_r_pthread_create+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lc_r  $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char pthread_create ();
-int
-main ()
-{
-return pthread_create ();
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-  ac_cv_lib_c_r_pthread_create=yes
-else
-  ac_cv_lib_c_r_pthread_create=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_c_r_pthread_create" >&5
-$as_echo "$ac_cv_lib_c_r_pthread_create" >&6; }
-if test "x$ac_cv_lib_c_r_pthread_create" = xyes; then :
-  cat >>confdefs.h <<_ACEOF
-#define HAVE_LIBC_R 1
-_ACEOF
-
-  LIBS="-lc_r $LIBS"
-
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for pthread_create in -lc" >&5
-$as_echo_n "checking for pthread_create in -lc... " >&6; }
-if ${ac_cv_lib_c_pthread_create+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lc  $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char pthread_create ();
-int
-main ()
-{
-return pthread_create ();
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-  ac_cv_lib_c_pthread_create=yes
-else
-  ac_cv_lib_c_pthread_create=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_c_pthread_create" >&5
-$as_echo "$ac_cv_lib_c_pthread_create" >&6; }
-if test "x$ac_cv_lib_c_pthread_create" = xyes; then :
-  cat >>confdefs.h <<_ACEOF
-#define HAVE_LIBC 1
-_ACEOF
-
-  LIBS="-lc $LIBS"
-
-else
-  as_fn_error $? "\"could not find thread libraries\"" "$LINENO" 5
-fi
-
-fi
-
-fi
-
-fi
-
-fi
-
-		;;
-	esac
-fi
-
-if $use_threads
-then
-	if test "X$GCC" = "Xyes"; then
-		case "$host" in
-		*-freebsd*)
-			CC="$CC -pthread"
-			CCOPT="$CCOPT -pthread"
-			STD_CDEFINES="$STD_CDEFINES -D_THREAD_SAFE"
-			;;
-		*-openbsd*)
-			CC="$CC -pthread"
-			CCOPT="$CCOPT -pthread"
-			;;
-		*-solaris*)
-			LIBS="$LIBS -lthread"
-			;;
-		*-ibm-aix*)
-			STD_CDEFINES="$STD_CDEFINES -D_THREAD_SAFE"
-			;;
-		esac
-	else
-		case $host in
-		*-dec-osf*)
-			CC="$CC -pthread"
-			CCOPT="$CCOPT -pthread"
-			;;
-		*-solaris*)
-			CC="$CC -mt"
-			CCOPT="$CCOPT -mt"
-			;;
-		*-ibm-aix*)
-			STD_CDEFINES="$STD_CDEFINES -D_THREAD_SAFE"
-			;;
-		*-sco-sysv*uw*|*-*-sysv*UnixWare*)
-			CC="$CC -Kthread"
-			CCOPT="$CCOPT -Kthread"
-			;;
-		*-*-sysv*OpenUNIX*)
-			CC="$CC -Kpthread"
-			CCOPT="$CCOPT -Kpthread"
-			;;
-		esac
-	fi
-	ALWAYS_DEFINES="-D_REENTRANT"
-	ISC_PLATFORM_USETHREADS="#define ISC_PLATFORM_USETHREADS 1"
-	THREADOPTOBJS='${THREADOPTOBJS}'
-	THREADOPTSRCS='${THREADOPTSRCS}'
-	thread_dir=pthreads
-	#
-	# We'd like to use sigwait() too
-	#
-	ac_fn_c_check_func "$LINENO" "sigwait" "ac_cv_func_sigwait"
-if test "x$ac_cv_func_sigwait" = xyes; then :
-  $as_echo "#define HAVE_SIGWAIT 1" >>confdefs.h
-
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for sigwait in -lc" >&5
-$as_echo_n "checking for sigwait in -lc... " >&6; }
-if ${ac_cv_lib_c_sigwait+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lc  $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char sigwait ();
-int
-main ()
-{
-return sigwait ();
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-  ac_cv_lib_c_sigwait=yes
-else
-  ac_cv_lib_c_sigwait=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_c_sigwait" >&5
-$as_echo "$ac_cv_lib_c_sigwait" >&6; }
-if test "x$ac_cv_lib_c_sigwait" = xyes; then :
-  $as_echo "#define HAVE_SIGWAIT 1" >>confdefs.h
-
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for sigwait in -lpthread" >&5
-$as_echo_n "checking for sigwait in -lpthread... " >&6; }
-if ${ac_cv_lib_pthread_sigwait+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lpthread  $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char sigwait ();
-int
-main ()
-{
-return sigwait ();
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-  ac_cv_lib_pthread_sigwait=yes
-else
-  ac_cv_lib_pthread_sigwait=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_pthread_sigwait" >&5
-$as_echo "$ac_cv_lib_pthread_sigwait" >&6; }
-if test "x$ac_cv_lib_pthread_sigwait" = xyes; then :
-  $as_echo "#define HAVE_SIGWAIT 1" >>confdefs.h
-
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for _Psigwait in -lpthread" >&5
-$as_echo_n "checking for _Psigwait in -lpthread... " >&6; }
-if ${ac_cv_lib_pthread__Psigwait+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lpthread  $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char _Psigwait ();
-int
-main ()
-{
-return _Psigwait ();
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-  ac_cv_lib_pthread__Psigwait=yes
-else
-  ac_cv_lib_pthread__Psigwait=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_pthread__Psigwait" >&5
-$as_echo "$ac_cv_lib_pthread__Psigwait" >&6; }
-if test "x$ac_cv_lib_pthread__Psigwait" = xyes; then :
-  $as_echo "#define HAVE_SIGWAIT 1" >>confdefs.h
-
-fi
-
-fi
-
-fi
-
-fi
-
-
-	ac_fn_c_check_func "$LINENO" "pthread_attr_getstacksize" "ac_cv_func_pthread_attr_getstacksize"
-if test "x$ac_cv_func_pthread_attr_getstacksize" = xyes; then :
-  $as_echo "#define HAVE_PTHREAD_ATTR_GETSTACKSIZE 1" >>confdefs.h
-
-fi
-
-
-	ac_fn_c_check_func "$LINENO" "pthread_attr_setstacksize" "ac_cv_func_pthread_attr_setstacksize"
-if test "x$ac_cv_func_pthread_attr_setstacksize" = xyes; then :
-  $as_echo "#define HAVE_PTHREAD_ATTR_SETSTACKSIZE 1" >>confdefs.h
-
-fi
-
-
-	#
-	# Additional OS-specific issues related to pthreads and sigwait.
-	#
-	case "$host" in
-		#
-		# One more place to look for sigwait.
-		#
-		*-freebsd*)
-			{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sigwait in -lc_r" >&5
-$as_echo_n "checking for sigwait in -lc_r... " >&6; }
-if ${ac_cv_lib_c_r_sigwait+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lc_r  $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char sigwait ();
-int
-main ()
-{
-return sigwait ();
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-  ac_cv_lib_c_r_sigwait=yes
-else
-  ac_cv_lib_c_r_sigwait=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_c_r_sigwait" >&5
-$as_echo "$ac_cv_lib_c_r_sigwait" >&6; }
-if test "x$ac_cv_lib_c_r_sigwait" = xyes; then :
-  $as_echo "#define HAVE_SIGWAIT 1" >>confdefs.h
-
-fi
-
-			case $host in
-			*-freebsd5.[012]|*-freebsd5.[012].*);;
-			*-freebsd5.[3456789]|*-freebsd5.[3456789].*)
-				$as_echo "#define NEED_PTHREAD_SCOPE_SYSTEM 1" >>confdefs.h
-
-				;;
-			*-freebsd6.*)
-				$as_echo "#define NEED_PTHREAD_SCOPE_SYSTEM 1" >>confdefs.h
-
-				;;
-			esac
-			;;
-		#
-		# BSDI 3.0 through 4.0.1 needs pthread_init() to be
-		# called before certain pthreads calls.	 This is deprecated
-		# in BSD/OS 4.1.
-		#
-		*-bsdi3.*|*-bsdi4.0*)
-			$as_echo "#define NEED_PTHREAD_INIT 1" >>confdefs.h
-
-			;;
-		#
-		# LinuxThreads requires some changes to the way we
-		# deal with signals.
-		#
-		*-linux*)
-			$as_echo "#define HAVE_LINUXTHREADS 1" >>confdefs.h
-
-			;;
-		#
-		# Ensure the right sigwait() semantics on Solaris and make
-		# sure we call pthread_setconcurrency.
-		#
-		*-solaris*)
-			$as_echo "#define _POSIX_PTHREAD_SEMANTICS 1" >>confdefs.h
-
-			ac_fn_c_check_func "$LINENO" "pthread_setconcurrency" "ac_cv_func_pthread_setconcurrency"
-if test "x$ac_cv_func_pthread_setconcurrency" = xyes; then :
-  $as_echo "#define CALL_PTHREAD_SETCONCURRENCY 1" >>confdefs.h
-
-fi
-
-			;;
-		#
-		# UnixWare does things its own way.
-		#
-		*-sco-sysv*uw*|*-*-sysv*UnixWare*|*-*-sysv*OpenUNIX*)
-			$as_echo "#define HAVE_UNIXWARE_SIGWAIT 1" >>confdefs.h
-
-			;;
-	esac
-
-	#
-	# Look for sysconf to allow detection of the number of processors.
-	#
-	ac_fn_c_check_func "$LINENO" "sysconf" "ac_cv_func_sysconf"
-if test "x$ac_cv_func_sysconf" = xyes; then :
-  $as_echo "#define HAVE_SYSCONF 1" >>confdefs.h
-
-fi
-
-
-else
-	ISC_PLATFORM_USETHREADS="#undef ISC_PLATFORM_USETHREADS"
-	thread_dir=nothreads
-	THREADOPTOBJS=""
-	THREADOPTSRCS=""
-	ALWAYS_DEFINES=""
-fi
-
-
-
-
-
-ISC_THREAD_DIR=$thread_dir
-
-
-#
-# was --with-libxml2 specified?
-#
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for libxml2 library" >&5
-$as_echo_n "checking for libxml2 library... " >&6; }
-
-# Check whether --with-libxml2 was given.
-if test "${with_libxml2+set}" = set; then :
-  withval=$with_libxml2; use_libxml2="$withval"
-else
-  use_libxml2="auto"
-fi
-
-
-case "$use_libxml2" in
-	no)
-		DST_LIBXML2_INC=""
-		;;
-	auto|yes)
-		case X`(xml2-config --version) 2>/dev/null` in
-		X2.[6789].*)
-			libxml2_libs=`xml2-config --libs`
-			libxml2_cflags=`xml2-config --cflags`
-			;;
-		*)
-			libxml2_libs=
-			libxml2_cflags=
-			;;
-		esac
-		;;
-	*)
-		if test -f "$use_libxml2/bin/xml2-config" ; then
-			libxml2_libs=`$use_libxml2/bin/xml2-config --libs`
-			libxml2_cflags=`$use_libxml2/bin/xml2-config --cflags`
-		fi
-		;;
-esac
-
-if test "X$libxml2_libs" != "X"
-then
-	{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-	CFLAGS="$CFLAGS $libxml2_cflags"
-	LIBS="$LIBS $libxml2_libs"
-
-$as_echo "#define HAVE_LIBXML2 1" >>confdefs.h
-
-else
-	{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-#
-# In solaris 10, SMF can manage named service
-#
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for smf_enable_instance in -lscf" >&5
-$as_echo_n "checking for smf_enable_instance in -lscf... " >&6; }
-if ${ac_cv_lib_scf_smf_enable_instance+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lscf  $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char smf_enable_instance ();
-int
-main ()
-{
-return smf_enable_instance ();
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-  ac_cv_lib_scf_smf_enable_instance=yes
-else
-  ac_cv_lib_scf_smf_enable_instance=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_scf_smf_enable_instance" >&5
-$as_echo "$ac_cv_lib_scf_smf_enable_instance" >&6; }
-if test "x$ac_cv_lib_scf_smf_enable_instance" = xyes; then :
-  cat >>confdefs.h <<_ACEOF
-#define HAVE_LIBSCF 1
-_ACEOF
-
-  LIBS="-lscf $LIBS"
-
-fi
-
-
-#
-# flockfile is usually provided by pthreads, but we may want to use it
-# even if compiled with --disable-threads.  getc_unlocked might also not
-# be defined.
-#
-ac_fn_c_check_func "$LINENO" "flockfile" "ac_cv_func_flockfile"
-if test "x$ac_cv_func_flockfile" = xyes; then :
-  $as_echo "#define HAVE_FLOCKFILE 1" >>confdefs.h
-
-fi
-
-ac_fn_c_check_func "$LINENO" "getc_unlocked" "ac_cv_func_getc_unlocked"
-if test "x$ac_cv_func_getc_unlocked" = xyes; then :
-  $as_echo "#define HAVE_GETCUNLOCKED 1" >>confdefs.h
-
-fi
-
-
-#
-# Indicate what the final decision was regarding threads.
-#
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with threads" >&5
-$as_echo_n "checking whether to build with threads... " >&6; }
-if $use_threads; then
-	{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-else
-	{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-#
-# End of pthreads stuff.
-#
-
-#
-# Large File
-#
-# Check whether --enable-largefile was given.
-if test "${enable_largefile+set}" = set; then :
-  enableval=$enable_largefile; want_largefile="yes"
-else
-  want_largefile="no"
-fi
-
-case $want_largefile in
-	yes)
-		ALWAYS_DEFINES="$ALWAYS_DEFINES -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64"
-		;;
-	*)
-		;;
-esac
-
-#
-# Additional compiler settings.
-#
-MKDEPCC="$CC"
-MKDEPCFLAGS="-M"
-IRIX_DNSSEC_WARNINGS_HACK=""
-
-if test "X$GCC" = "Xyes"; then
-	{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if \"$CC\" supports -fno-strict-aliasing" >&5
-$as_echo_n "checking if \"$CC\" supports -fno-strict-aliasing... " >&6; }
-	SAVE_CFLAGS=$CFLAGS
-	CFLAGS="$CFLAGS -fno-strict-aliasing"
-	cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  FNOSTRICTALIASING=yes
-else
-  FNOSTRICTALIASING=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-	CFLAGS=$SAVE_CFLAGS
-	if test "$FNOSTRICTALIASING" = "yes"; then
-		{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-	STD_CWARNINGS="$STD_CWARNINGS -W -Wall -Wmissing-prototypes -Wcast-qual -Wwrite-strings -Wformat -Wpointer-arith -fno-strict-aliasing"
-	else
-		{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-	STD_CWARNINGS="$STD_CWARNINGS -W -Wall -Wmissing-prototypes -Wcast-qual -Wwrite-strings -Wformat -Wpointer-arith"
-	fi
-	case "$host" in
-	*-hp-hpux*)
-		LDFLAGS="-Wl,+vnocompatwarnings $LDFLAGS"
-		;;
-	esac
-else
-	case $host in
-	*-dec-osf*)
-		CC="$CC -std"
-		CCOPT="$CCOPT -std"
-		MKDEPCC="$CC"
-		;;
-	*-hp-hpux*)
-		CC="$CC -Ae -z"
-		# The version of the C compiler that constantly warns about
-		# 'const' as well as alignment issues is unfortunately not
-		# able to be discerned via the version of the operating
-		# system, nor does cc have a version flag.
-		case "`$CC +W 123 2>&1`" in
-		*Unknown?option*)
-			STD_CWARNINGS="+w1"
-			;;
-		*)
-			# Turn off the pointlessly noisy warnings.
-			STD_CWARNINGS="+w1 +W 474,530,2193,2236"
-			;;
-		esac
-		CCOPT="$CCOPT -Ae -z"
-		LDFLAGS="-Wl,+vnocompatwarnings $LDFLAGS"
-		MKDEPPROG='cc -Ae -E -Wp,-M >/dev/null 2>>$TMP'
-		;;
-	*-sgi-irix*)
-		STD_CWARNINGS="-fullwarn -woff 1209"
-		#
-		# Silence more than 250 instances of
-		#   "prototyped function redeclared without prototype"
-		# and 11 instances of
-		#   "variable ... was set but never used"
-		# from lib/dns/sec/openssl.
-		#
-		IRIX_DNSSEC_WARNINGS_HACK="-woff 1692,1552"
-		;;
-	*-solaris*)
-		MKDEPCFLAGS="-xM"
-		;;
-	*-sco-sysv*uw*|*-*-sysv*UnixWare*|*-*-sysv*OpenUNIX*)
-		# UnixWare
-		CC="$CC -w"
-		;;
-	esac
-fi
-
-
-
-
-
-
-#
-# NLS
-#
-ac_fn_c_check_func "$LINENO" "catgets" "ac_cv_func_catgets"
-if test "x$ac_cv_func_catgets" = xyes; then :
-  $as_echo "#define HAVE_CATGETS 1" >>confdefs.h
-
-fi
-
-
-#
-# -lxnet buys us one big porting headache...  standards, gotta love 'em.
-#
-# AC_CHECK_LIB(xnet, socket, ,
-#    AC_CHECK_LIB(socket, socket)
-# )
-#
-# Use this for now, instead:
-#
-case "$host" in
-	mips-sgi-irix*)
-		;;
-	*-linux*)
-		;;
-	*)
-		{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for socket in -lsocket" >&5
-$as_echo_n "checking for socket in -lsocket... " >&6; }
-if ${ac_cv_lib_socket_socket+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lsocket  $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char socket ();
-int
-main ()
-{
-return socket ();
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-  ac_cv_lib_socket_socket=yes
-else
-  ac_cv_lib_socket_socket=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_socket_socket" >&5
-$as_echo "$ac_cv_lib_socket_socket" >&6; }
-if test "x$ac_cv_lib_socket_socket" = xyes; then :
-  cat >>confdefs.h <<_ACEOF
-#define HAVE_LIBSOCKET 1
-_ACEOF
-
-  LIBS="-lsocket $LIBS"
-
-fi
-
-		{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for inet_addr in -lnsl" >&5
-$as_echo_n "checking for inet_addr in -lnsl... " >&6; }
-if ${ac_cv_lib_nsl_inet_addr+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lnsl  $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char inet_addr ();
-int
-main ()
-{
-return inet_addr ();
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-  ac_cv_lib_nsl_inet_addr=yes
-else
-  ac_cv_lib_nsl_inet_addr=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_nsl_inet_addr" >&5
-$as_echo "$ac_cv_lib_nsl_inet_addr" >&6; }
-if test "x$ac_cv_lib_nsl_inet_addr" = xyes; then :
-  cat >>confdefs.h <<_ACEOF
-#define HAVE_LIBNSL 1
-_ACEOF
-
-  LIBS="-lnsl $LIBS"
-
-fi
-
-		;;
-esac
-
-#
-# Work around Solaris's select() limitations.
-#
-case "$host" in
-	*-solaris2.[89]|*-solaris2.1?)
-
-$as_echo "#define FD_SETSIZE 65536" >>confdefs.h
-
-	;;
-esac
-
-#
-# Purify support
-#
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to use purify" >&5
-$as_echo_n "checking whether to use purify... " >&6; }
-
-# Check whether --with-purify was given.
-if test "${with_purify+set}" = set; then :
-  withval=$with_purify; use_purify="$withval"
-else
-  use_purify="no"
-fi
-
-
-case "$use_purify" in
-	no)
-		;;
-	yes)
-		# Extract the first word of "purify", so it can be a program name with args.
-set dummy purify; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_purify_path+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  case $purify_path in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_purify_path="$purify_path" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_purify_path="$as_dir/$ac_word$ac_exec_ext"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-  test -z "$ac_cv_path_purify_path" && ac_cv_path_purify_path="purify"
-  ;;
-esac
-fi
-purify_path=$ac_cv_path_purify_path
-if test -n "$purify_path"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $purify_path" >&5
-$as_echo "$purify_path" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-		;;
-	*)
-		purify_path="$use_purify"
-		;;
-esac
-
-case "$use_purify" in
-	no)
-		{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-		PURIFY=""
-		;;
-	*)
-		if test -f $purify_path || test $purify_path = purify; then
-			{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $purify_path" >&5
-$as_echo "$purify_path" >&6; }
-			PURIFYFLAGS="`echo $PURIFYOPTIONS`"
-			PURIFY="$purify_path $PURIFYFLAGS"
-		else
-			as_fn_error $? "$purify_path not found.
-
-Please choose the proper path with the following command:
-
-    configure --with-purify=PATH
-" "$LINENO" 5
-		fi
-		;;
-esac
-
-
-
-
-
-# Check whether --with-libtool was given.
-if test "${with_libtool+set}" = set; then :
-  withval=$with_libtool; use_libtool="$withval"
-else
-  use_libtool="no"
-fi
-
-
-case $use_libtool in
-	yes)
-
-		O=lo
-		A=la
-		LIBTOOL_MKDEP_SED='s;\.o;\.lo;'
-		LIBTOOL_MODE_COMPILE='--mode=compile --tag=CC'
-		LIBTOOL_MODE_INSTALL='--mode=install --tag=CC'
-		LIBTOOL_MODE_LINK='--mode=link --tag=CC'
-		case "$host" in
-		*) LIBTOOL_ALLOW_UNDEFINED= ;;
-		esac
-		case "$host" in
-		*-ibm-aix*) LIBTOOL_IN_MAIN="-Wl,-bI:T_testlist.imp" ;;
-		*) LIBTOOL_IN_MAIN= ;;
-		esac;
-		;;
-	*)
-		O=o
-		A=a
-		LIBTOOL=
-
-		LIBTOOL_MKDEP_SED=
-		LIBTOOL_MODE_COMPILE=
-		LIBTOOL_MODE_INSTALL=
-		LIBTOOL_MODE_LINK=
-		LIBTOOL_ALLOW_UNDEFINED=
-		LIBTOOL_IN_MAIN=
-		;;
-esac
-
-#
-# enable/disable dumping stack backtrace.  Also check if the system supports
-# glibc-compatible backtrace() function.
-#
-# Check whether --enable-backtrace was given.
-if test "${enable_backtrace+set}" = set; then :
-  enableval=$enable_backtrace; want_backtrace="$enableval"
-else
-  want_backtrace="yes"
-fi
-
-case $want_backtrace in
-yes)
-	ISC_PLATFORM_USEBACKTRACE="#define ISC_PLATFORM_USEBACKTRACE 1"
-	cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include <execinfo.h>
-int
-main ()
-{
-return (backtrace((void **)0, 0));
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-
-$as_echo "#define HAVE_LIBCTRACE /**/" >>confdefs.h
-
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-	;;
-*)
-	ISC_PLATFORM_USEBACKTRACE="#undef ISC_PLATFORM_USEBACKTRACE"
-	;;
-esac
-
-
-# Check whether --enable-symtable was given.
-if test "${enable_symtable+set}" = set; then :
-  enableval=$enable_symtable; want_symtable="$enableval"
-else
-  want_symtable="minimal"
-fi
-
-case $want_symtable in
-yes|all|minimal)     # "yes" is a hidden value equivalent to "minimal"
-	if test "$PERL" = ""
-	then
-		as_fn_error $? "Internal symbol table requires perl but no perl is found.
-Install perl or explicitly disable the feature by --disable-symtable." "$LINENO" 5
-	fi
-	if test "$use_libtool" = "yes"; then
-		{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Internal symbol table does not work with libtool.  Disabling symbol table." >&5
-$as_echo "$as_me: WARNING: Internal symbol table does not work with libtool.  Disabling symbol table." >&2;}
-	else
-		# we generate the internal symbol table only for those systems
-		# known to work to avoid unexpected build failure.  Also, warn
-		# about unsupported systems when the feature is enabled
-		#  manually.
-		case $host_os in
-		freebsd*|netbsd*|openbsd*|linux*|solaris*|darwin*)
-			MKSYMTBL_PROGRAM="$PERL"
-			if test $want_symtable = all; then
-				ALWAYS_MAKE_SYMTABLE="yes"
-			fi
-			;;
-		*)
-			if test $want_symtable = yes -o $want_symtable = all
-			then
-				{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: this system is not known to generate internal symbol table safely; disabling it" >&5
-$as_echo "$as_me: WARNING: this system is not known to generate internal symbol table safely; disabling it" >&2;}
-			fi
-		esac
-	fi
-	;;
-*)
-	;;
-esac
-
-
-
-#
-# File name extension for static archive files, for those few places
-# where they are treated differently from dynamic ones.
-#
-SA=a
-
-
-
-
-
-
-
-
-
-
-
-#
-# build exportable DNS library?
-#
-# Check whether --enable-exportlib was given.
-if test "${enable_exportlib+set}" = set; then :
-  enableval=$enable_exportlib;
-fi
-
-case "$enable_exportlib" in
-	yes)
-		gmake=
-		for x in gmake gnumake make; do
-			if $x --version 2>/dev/null | grep GNU > /dev/null; then
-				gmake=$x
-				break;
-			fi
-		done
-		if test -z "$gmake"; then
-			as_fn_error $? "exportlib requires GNU make.  Install it or disable the feature." "$LINENO" 5
-		fi
-		LIBEXPORT=lib/export
-
-		BIND9_CO_RULE="%.$O:  \${srcdir}/%.c"
-		;;
-	no|*)
-		BIND9_CO_RULE=".c.$O:"
-		;;
-esac
-
-
-
-# Check whether --with-export-libdir was given.
-if test "${with_export_libdir+set}" = set; then :
-  withval=$with_export_libdir; export_libdir="$withval"
-fi
-
-if test -z "$export_libdir"; then
-	export_libdir="\${exec_prefix}/lib/bind9/"
-fi
-
-
-
-# Check whether --with-export-includedir was given.
-if test "${with_export_includedir+set}" = set; then :
-  withval=$with_export_includedir; export_includedir="$withval"
-fi
-
-if test -z "$export_includedir"; then
-	export_includedir="\${prefix}/include/bind9/"
-fi
-
-
-#
-# Here begins a very long section to determine the system's networking
-# capabilities.  The order of the tests is significant.
-#
-
-#
-# IPv6
-#
-# Check whether --enable-ipv6 was given.
-if test "${enable_ipv6+set}" = set; then :
-  enableval=$enable_ipv6;
-fi
-
-
-case "$enable_ipv6" in
-	yes|''|autodetect)
-		$as_echo "#define WANT_IPV6 1" >>confdefs.h
-
-		;;
-	no)
-		;;
-esac
-
-#
-# We do the IPv6 compilation checking after libtool so that we can put
-# the right suffix on the files.
-#
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for IPv6 structures" >&5
-$as_echo_n "checking for IPv6 structures... " >&6; }
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <netinet/in.h>
-int
-main ()
-{
-struct sockaddr_in6 sin6; return (0);
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-	 found_ipv6=yes
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-	 found_ipv6=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-
-#
-# See whether IPv6 support is provided via a Kame add-on.
-# This is done before other IPv6 linking tests to LIBS is properly set.
-#
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Kame IPv6 support" >&5
-$as_echo_n "checking for Kame IPv6 support... " >&6; }
-
-# Check whether --with-kame was given.
-if test "${with_kame+set}" = set; then :
-  withval=$with_kame; use_kame="$withval"
-else
-  use_kame="no"
-fi
-
-
-case "$use_kame" in
-	no)
-		;;
-	yes)
-		kame_path=/usr/local/v6
-		;;
-	*)
-		kame_path="$use_kame"
-		;;
-esac
-
-case "$use_kame" in
-	no)
-		{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-		;;
-	*)
-		if test -f $kame_path/lib/libinet6.a; then
-			{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $kame_path/lib/libinet6.a" >&5
-$as_echo "$kame_path/lib/libinet6.a" >&6; }
-			LIBS="-L$kame_path/lib -linet6 $LIBS"
-		else
-			as_fn_error $? "$kame_path/lib/libinet6.a not found.
-
-Please choose the proper path with the following command:
-
-    configure --with-kame=PATH
-" "$LINENO" 5
-		fi
-		;;
-esac
-
-#
-# Whether netinet6/in6.h is needed has to be defined in isc/platform.h.
-# Including it on Kame-using platforms is very bad, though, because
-# Kame uses #error against direct inclusion.   So include it on only
-# the platform that is otherwise broken without it -- BSD/OS 4.0 through 4.1.
-# This is done before the in6_pktinfo check because that's what
-# netinet6/in6.h is needed for.
-#
-
-case "$host" in
-*-bsdi4.[01]*)
-	ISC_PLATFORM_NEEDNETINET6IN6H="#define ISC_PLATFORM_NEEDNETINET6IN6H 1"
-	LWRES_PLATFORM_NEEDNETINET6IN6H="#define LWRES_PLATFORM_NEEDNETINET6IN6H 1"
-	isc_netinet6in6_hack="#include <netinet6/in6.h>"
-	;;
-*)
-	ISC_PLATFORM_NEEDNETINET6IN6H="#undef ISC_PLATFORM_NEEDNETINET6IN6H"
-	LWRES_PLATFORM_NEEDNETINET6IN6H="#undef LWRES_PLATFORM_NEEDNETINET6IN6H"
-	isc_netinet6in6_hack=""
-	;;
-esac
-
-
-#
-# This is similar to the netinet6/in6.h issue.
-#
-case "$host" in
-*-sco-sysv*uw*|*-*-sysv*UnixWare*|*-*-sysv*OpenUNIX*)
-	# UnixWare
-	ISC_PLATFORM_NEEDNETINETIN6H="#define ISC_PLATFORM_NEEDNETINETIN6H 1"
-	LWRES_PLATFORM_NEEDNETINETIN6H="#define LWRES_PLATFORM_NEEDNETINETIN6H 1"
-	ISC_PLATFORM_FIXIN6ISADDR="#define ISC_PLATFORM_FIXIN6ISADDR 1"
-	isc_netinetin6_hack="#include <netinet/in6.h>"
-	;;
-*)
-	ISC_PLATFORM_NEEDNETINETIN6H="#undef ISC_PLATFORM_NEEDNETINETIN6H"
-	LWRES_PLATFORM_NEEDNETINETIN6H="#undef LWRES_PLATFORM_NEEDNETINETIN6H"
-	ISC_PLATFORM_FIXIN6ISADDR="#undef ISC_PLATFORM_FIXIN6ISADDR"
-	isc_netinetin6_hack=""
-	;;
-esac
-
-#
-# Now delve deeper into the suitability of the IPv6 support.
-#
-case "$found_ipv6" in
-	yes)
-		ISC_PLATFORM_HAVEIPV6="#define ISC_PLATFORM_HAVEIPV6 1"
-		LWRES_PLATFORM_HAVEIPV6="#define LWRES_PLATFORM_HAVEIPV6 1"
-
-		{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for in6_addr" >&5
-$as_echo_n "checking for in6_addr... " >&6; }
-		cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <netinet/in.h>
-$isc_netinetin6_hack
-$isc_netinet6in6_hack
-
-int
-main ()
-{
-struct in6_addr in6; return (0);
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-		 ISC_PLATFORM_HAVEINADDR6="#undef ISC_PLATFORM_HAVEINADDR6"
-		 LWRES_PLATFORM_HAVEINADDR6="#undef LWRES_PLATFORM_HAVEINADDR6"
-		 isc_in_addr6_hack=""
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-		 ISC_PLATFORM_HAVEINADDR6="#define ISC_PLATFORM_HAVEINADDR6 1"
-		 LWRES_PLATFORM_HAVEINADDR6="#define LWRES_PLATFORM_HAVEINADDR6 1"
-		 isc_in_addr6_hack="#define in6_addr in_addr6"
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-
-		{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for in6addr_any" >&5
-$as_echo_n "checking for in6addr_any... " >&6; }
-		cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <netinet/in.h>
-$isc_netinetin6_hack
-$isc_netinet6in6_hack
-$isc_in_addr6_hack
-
-int
-main ()
-{
-struct in6_addr in6; in6 = in6addr_any; return (in6.s6_addr[0]);
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-			 ISC_PLATFORM_NEEDIN6ADDRANY="#undef ISC_PLATFORM_NEEDIN6ADDRANY"
-			 LWRES_PLATFORM_NEEDIN6ADDRANY="#undef LWRES_PLATFORM_NEEDIN6ADDRANY"
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-			 ISC_PLATFORM_NEEDIN6ADDRANY="#define ISC_PLATFORM_NEEDIN6ADDRANY 1"
-			 LWRES_PLATFORM_NEEDIN6ADDRANY="#define LWRES_PLATFORM_NEEDIN6ADDRANY 1"
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-
-		{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for in6addr_loopback" >&5
-$as_echo_n "checking for in6addr_loopback... " >&6; }
-		cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <netinet/in.h>
-$isc_netinetin6_hack
-$isc_netinet6in6_hack
-$isc_in_addr6_hack
-
-int
-main ()
-{
-struct in6_addr in6; in6 = in6addr_loopback; return (in6.s6_addr[0]);
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-			 ISC_PLATFORM_NEEDIN6ADDRLOOPBACK="#undef ISC_PLATFORM_NEEDIN6ADDRLOOPBACK"
-			 LWRES_PLATFORM_NEEDIN6ADDRLOOPBACK="#undef LWRES_PLATFORM_NEEDIN6ADDRLOOPBACK"
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-			 ISC_PLATFORM_NEEDIN6ADDRLOOPBACK="#define ISC_PLATFORM_NEEDIN6ADDRLOOPBACK 1"
-			 LWRES_PLATFORM_NEEDIN6ADDRLOOPBACK="#define LWRES_PLATFORM_NEEDIN6ADDRLOOPBACK 1"
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-
-		{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sin6_scope_id in struct sockaddr_in6" >&5
-$as_echo_n "checking for sin6_scope_id in struct sockaddr_in6... " >&6; }
-		cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <netinet/in.h>
-$isc_netinetin6_hack
-$isc_netinet6in6_hack
-
-int
-main ()
-{
-struct sockaddr_in6 xyzzy; xyzzy.sin6_scope_id = 0; return (0);
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-			 ISC_PLATFORM_HAVESCOPEID="#define ISC_PLATFORM_HAVESCOPEID 1"
-			 result="#define LWRES_HAVE_SIN6_SCOPE_ID 1"
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-			 ISC_PLATFORM_HAVESCOPEID="#undef ISC_PLATFORM_HAVESCOPEID"
-			 result="#undef LWRES_HAVE_SIN6_SCOPE_ID"
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-		LWRES_HAVE_SIN6_SCOPE_ID="$result"
-
-		{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for in6_pktinfo" >&5
-$as_echo_n "checking for in6_pktinfo... " >&6; }
-		cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <netinet/in.h>
-$isc_netinetin6_hack
-$isc_netinet6in6_hack
-
-int
-main ()
-{
-struct in6_pktinfo xyzzy; return (0);
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-			 ISC_PLATFORM_HAVEIN6PKTINFO="#define ISC_PLATFORM_HAVEIN6PKTINFO 1"
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no -- disabling runtime ipv6 support" >&5
-$as_echo "no -- disabling runtime ipv6 support" >&6; }
-			 ISC_PLATFORM_HAVEIN6PKTINFO="#undef ISC_PLATFORM_HAVEIN6PKTINFO"
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-		;;
-	no)
-		ISC_PLATFORM_HAVEIPV6="#undef ISC_PLATFORM_HAVEIPV6"
-		LWRES_PLATFORM_HAVEIPV6="#undef LWRES_PLATFORM_HAVEIPV6"
-		ISC_PLATFORM_NEEDIN6ADDRANY="#undef ISC_PLATFORM_NEEDIN6ADDRANY"
-		LWRES_PLATFORM_NEEDIN6ADDRANY="#undef LWRES_PLATFORM_NEEDIN6ADDRANY"
-		ISC_PLATFORM_HAVEIN6PKTINFO="#undef ISC_PLATFORM_HAVEIN6PKTINFO"
-		LWRES_HAVE_SIN6_SCOPE_ID="#define LWRES_HAVE_SIN6_SCOPE_ID 1"
-		ISC_PLATFORM_HAVESCOPEID="#define ISC_PLATFORM_HAVESCOPEID 1"
-		ISC_IPV6_H="ipv6.h"
-		ISC_IPV6_O="ipv6.$O"
-		ISC_ISCIPV6_O="unix/ipv6.$O"
-		ISC_IPV6_C="ipv6.c"
-		;;
-esac
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for struct if_laddrreq" >&5
-$as_echo_n "checking for struct if_laddrreq... " >&6; }
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-#include <sys/types.h>
-#include <net/if6.h>
-
-int
-main ()
-{
- struct if_laddrreq a;
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-	ISC_PLATFORM_HAVEIF_LADDRREQ="#define ISC_PLATFORM_HAVEIF_LADDRREQ 1"
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-	ISC_PLATFORM_HAVEIF_LADDRREQ="#undef ISC_PLATFORM_HAVEIF_LADDRREQ"
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for struct if_laddrconf" >&5
-$as_echo_n "checking for struct if_laddrconf... " >&6; }
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-#include <sys/types.h>
-#include <net/if6.h>
-
-int
-main ()
-{
- struct if_laddrconf a;
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-	ISC_PLATFORM_HAVEIF_LADDRCONF="#define ISC_PLATFORM_HAVEIF_LADDRCONF 1"
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-	ISC_PLATFORM_HAVEIF_LADDRCONF="#undef ISC_PLATFORM_HAVEIF_LADDRCONF"
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-
-
-#
-# Check for network functions that are often missing.  We do this
-# after the libtool checking, so we can put the right suffix on
-# the files.  It also needs to come after checking for a Kame add-on,
-# which provides some (all?) of the desired functions.
-#
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for inet_ntop with IPv6 support" >&5
-$as_echo_n "checking for inet_ntop with IPv6 support... " >&6; }
-if test "$cross_compiling" = yes; then :
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: assuming inet_ntop not needed" >&5
-$as_echo "assuming inet_ntop not needed" >&6; }
-	ISC_PLATFORM_NEEDNTOP="#undef ISC_PLATFORM_NEEDNTOP"
-else
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <netinet/in.h>
-#include <arpa/inet.h>
-main() {
-char a[16],b[64]; return(inet_ntop(AF_INET6, a, b, sizeof(b)) == (char*)0);}
-_ACEOF
-if ac_fn_c_try_run "$LINENO"; then :
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-	ISC_PLATFORM_NEEDNTOP="#undef ISC_PLATFORM_NEEDNTOP"
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-	ISC_EXTRA_OBJS="$ISC_EXTRA_OBJS inet_ntop.$O"
-	ISC_EXTRA_SRCS="$ISC_EXTRA_SRCS inet_ntop.c"
-	ISC_PLATFORM_NEEDNTOP="#define ISC_PLATFORM_NEEDNTOP 1"
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
-  conftest.$ac_objext conftest.beam conftest.$ac_ext
-fi
-
-
-
-# On NetBSD 1.4.2 and maybe others, inet_pton() incorrectly accepts
-# addresses with less than four octets, like "1.2.3".  Also leading
-# zeros should also be rejected.
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for working inet_pton with IPv6 support" >&5
-$as_echo_n "checking for working inet_pton with IPv6 support... " >&6; }
-if test "$cross_compiling" = yes; then :
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: assuming inet_pton needed" >&5
-$as_echo "assuming inet_pton needed" >&6; }
-	ISC_EXTRA_OBJS="$ISC_EXTRA_OBJS inet_pton.$O"
-	ISC_EXTRA_SRCS="$ISC_EXTRA_SRCS inet_pton.c"
-	ISC_PLATFORM_NEEDPTON="#define ISC_PLATFORM_NEEDPTON 1"
-else
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <netinet/in.h>
-#include <arpa/inet.h>
-main() { char a[16]; return (inet_pton(AF_INET, "1.2.3", a) == 1 ? 1 :
-			     inet_pton(AF_INET, "1.2.3.04", a) == 1 ? 1 :
-			     (inet_pton(AF_INET6, "::1.2.3.4", a) != 1)); }
-_ACEOF
-if ac_fn_c_try_run "$LINENO"; then :
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-	ISC_PLATFORM_NEEDPTON="#undef ISC_PLATFORM_NEEDPTON"
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-	ISC_EXTRA_OBJS="$ISC_EXTRA_OBJS inet_pton.$O"
-	ISC_EXTRA_SRCS="$ISC_EXTRA_SRCS inet_pton.c"
-	ISC_PLATFORM_NEEDPTON="#define ISC_PLATFORM_NEEDPTON 1"
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
-  conftest.$ac_objext conftest.beam conftest.$ac_ext
-fi
-
-
-
-
-
-#
-# Look for a 4.4BSD-style sa_len member in struct sockaddr.
-#
-case "$host" in
-	*-dec-osf*)
-		# Turn on 4.4BSD style sa_len support.
-		$as_echo "#define _SOCKADDR_LEN 1" >>confdefs.h
-
-		;;
-esac
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sa_len in struct sockaddr" >&5
-$as_echo_n "checking for sa_len in struct sockaddr... " >&6; }
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-#include <sys/types.h>
-#include <sys/socket.h>
-int
-main ()
-{
-struct sockaddr sa; sa.sa_len = 0; return (0);
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-	ISC_PLATFORM_HAVESALEN="#define ISC_PLATFORM_HAVESALEN 1"
-	LWRES_PLATFORM_HAVESALEN="#define LWRES_PLATFORM_HAVESALEN 1"
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-	ISC_PLATFORM_HAVESALEN="#undef ISC_PLATFORM_HAVESALEN"
-	LWRES_PLATFORM_HAVESALEN="#undef LWRES_PLATFORM_HAVESALEN"
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-
-
-
-#
-# Look for a 4.4BSD or 4.3BSD struct msghdr
-#
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for struct msghdr flavor" >&5
-$as_echo_n "checking for struct msghdr flavor... " >&6; }
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-#include <sys/types.h>
-#include <sys/socket.h>
-int
-main ()
-{
-struct msghdr msg; msg.msg_flags = 0; return (0);
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: 4.4BSD" >&5
-$as_echo "4.4BSD" >&6; }
-	ISC_PLATFORM_MSGHDRFLAVOR="#define ISC_NET_BSD44MSGHDR 1"
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: 4.3BSD" >&5
-$as_echo "4.3BSD" >&6; }
-	ISC_PLATFORM_MSGHDRFLAVOR="#define ISC_NET_BSD43MSGHDR 1"
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-
-
-#
-# Look for in_port_t.
-#
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for type in_port_t" >&5
-$as_echo_n "checking for type in_port_t... " >&6; }
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-#include <sys/types.h>
-#include <netinet/in.h>
-int
-main ()
-{
-in_port_t port = 25; return (0);
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-	ISC_PLATFORM_NEEDPORTT="#undef ISC_PLATFORM_NEEDPORTT"
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-	ISC_PLATFORM_NEEDPORTT="#define ISC_PLATFORM_NEEDPORTT 1"
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-
-
-#
-# Check for addrinfo
-#
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for struct addrinfo" >&5
-$as_echo_n "checking for struct addrinfo... " >&6; }
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-#include <netdb.h>
-int
-main ()
-{
-struct addrinfo a; return (0);
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-	ISC_LWRES_NEEDADDRINFO="#undef ISC_LWRES_NEEDADDRINFO"
-	ISC_IRS_NEEDADDRINFO="#undef ISC_IRS_NEEDADDRINFO"
-	$as_echo "#define HAVE_ADDRINFO 1" >>confdefs.h
-
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-	ISC_LWRES_NEEDADDRINFO="#define ISC_LWRES_NEEDADDRINFO 1"
-	ISC_IRS_NEEDADDRINFO="#define ISC_IRS_NEEDADDRINFO 1"
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-
-
-
-#
-# Check for rrsetinfo
-#
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for struct rrsetinfo" >&5
-$as_echo_n "checking for struct rrsetinfo... " >&6; }
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-#include <netdb.h>
-int
-main ()
-{
-struct rrsetinfo r; return (0);
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-	ISC_LWRES_NEEDRRSETINFO="#undef ISC_LWRES_NEEDRRSETINFO"
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-	ISC_LWRES_NEEDRRSETINFO="#define ISC_LWRES_NEEDRRSETINFO 1"
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for int sethostent" >&5
-$as_echo_n "checking for int sethostent... " >&6; }
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-#include <netdb.h>
-int
-main ()
-{
-int i = sethostent(0); return(0);
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-	ISC_LWRES_SETHOSTENTINT="#define ISC_LWRES_SETHOSTENTINT 1"
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-	ISC_LWRES_SETHOSTENTINT="#undef ISC_LWRES_SETHOSTENTINT"
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for int endhostent" >&5
-$as_echo_n "checking for int endhostent... " >&6; }
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-#include <netdb.h>
-int
-main ()
-{
-int i = endhostent(); return(0);
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-	ISC_LWRES_ENDHOSTENTINT="#define ISC_LWRES_ENDHOSTENTINT 1"
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-	ISC_LWRES_ENDHOSTENTINT="#undef ISC_LWRES_ENDHOSTENTINT"
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for getnetbyaddr(in_addr_t, ...)" >&5
-$as_echo_n "checking for getnetbyaddr(in_addr_t, ...)... " >&6; }
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-#include <netdb.h>
-struct netent *getnetbyaddr(in_addr_t, int);
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-	ISC_LWRES_GETNETBYADDRINADDR="#define ISC_LWRES_GETNETBYADDRINADDR 1"
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-	ISC_LWRES_GETNETBYADDRINADDR="#undef ISC_LWRES_GETNETBYADDRINADDR"
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for int setnetent" >&5
-$as_echo_n "checking for int setnetent... " >&6; }
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-#include <netdb.h>
-int
-main ()
-{
-int i = setnetent(0); return(0);
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-	ISC_LWRES_SETNETENTINT="#define ISC_LWRES_SETNETENTINT 1"
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-	ISC_LWRES_SETNETENTINT="#undef ISC_LWRES_SETNETENTINT"
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for int endnetent" >&5
-$as_echo_n "checking for int endnetent... " >&6; }
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-#include <netdb.h>
-int
-main ()
-{
-int i = endnetent(); return(0);
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-	ISC_LWRES_ENDNETENTINT="#define ISC_LWRES_ENDNETENTINT 1"
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-	ISC_LWRES_ENDNETENTINT="#undef ISC_LWRES_ENDNETENTINT"
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for gethostbyaddr(const void *, size_t, ...)" >&5
-$as_echo_n "checking for gethostbyaddr(const void *, size_t, ...)... " >&6; }
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-#include <netdb.h>
-struct hostent *gethostbyaddr(const void *, size_t, int);
-int
-main ()
-{
-return(0);
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-	ISC_LWRES_GETHOSTBYADDRVOID="#define ISC_LWRES_GETHOSTBYADDRVOID 1"
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-	ISC_LWRES_GETHOSTBYADDRVOID="#undef ISC_LWRES_GETHOSTBYADDRVOID"
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for h_errno in netdb.h" >&5
-$as_echo_n "checking for h_errno in netdb.h... " >&6; }
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-#include <netdb.h>
-int
-main ()
-{
-h_errno = 1; return(0);
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-	ISC_LWRES_NEEDHERRNO="#undef ISC_LWRES_NEEDHERRNO"
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-	ISC_LWRES_NEEDHERRNO="#define ISC_LWRES_NEEDHERRNO 1"
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-
-
-#
-# Sadly, the definitions of system-supplied getnameinfo(3) vary.  Try to catch
-# known variations here:
-#
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for getnameinfo prototype definitions" >&5
-$as_echo_n "checking for getnameinfo prototype definitions... " >&6; }
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <netdb.h>
-int getnameinfo(const struct sockaddr *, socklen_t, char *,
-                socklen_t, char *, socklen_t, unsigned int);
-int
-main ()
-{
- return (0);
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: socklen_t for buflen; u_int for flags" >&5
-$as_echo "socklen_t for buflen; u_int for flags" >&6; }
-
-$as_echo "#define IRS_GETNAMEINFO_BUFLEN_T socklen_t" >>confdefs.h
-
-
-$as_echo "#define IRS_GETNAMEINFO_FLAGS_T unsigned int" >>confdefs.h
-
-else
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <netdb.h>
-int getnameinfo(const struct sockaddr *, socklen_t, char *,
-                size_t, char *, size_t, int);
-int
-main ()
-{
- return (0);
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: size_t for buflen; int for flags" >&5
-$as_echo "size_t for buflen; int for flags" >&6; }
-	 $as_echo "#define IRS_GETNAMEINFO_BUFLEN_T size_t" >>confdefs.h
-
-	 $as_echo "#define IRS_GETNAMEINFO_FLAGS_T int" >>confdefs.h
-
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: not match any subspecies; assume standard definition" >&5
-$as_echo "not match any subspecies; assume standard definition" >&6; }
-$as_echo "#define IRS_GETNAMEINFO_BUFLEN_T socklen_t" >>confdefs.h
-
-$as_echo "#define IRS_GETNAMEINFO_FLAGS_T int" >>confdefs.h
-
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-
-#
-# ...and same for gai_strerror().
-#
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for gai_strerror prototype definitions" >&5
-$as_echo_n "checking for gai_strerror prototype definitions... " >&6; }
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <netdb.h>
-char *gai_strerror(int ecode);
-int
-main ()
-{
- return (0);
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: returning char *" >&5
-$as_echo "returning char *" >&6; }
-
-$as_echo "#define IRS_GAISTRERROR_RETURN_T char *" >>confdefs.h
-
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: not match any subspecies; assume standard definition" >&5
-$as_echo "not match any subspecies; assume standard definition" >&6; }
-$as_echo "#define IRS_GAISTRERROR_RETURN_T const char *" >>confdefs.h
-
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-
-ac_fn_c_check_func "$LINENO" "getipnodebyname" "ac_cv_func_getipnodebyname"
-if test "x$ac_cv_func_getipnodebyname" = xyes; then :
-  ISC_LWRES_GETIPNODEPROTO="#undef ISC_LWRES_GETIPNODEPROTO"
-else
-  ISC_LWRES_GETIPNODEPROTO="#define ISC_LWRES_GETIPNODEPROTO 1"
-fi
-
-ac_fn_c_check_func "$LINENO" "getnameinfo" "ac_cv_func_getnameinfo"
-if test "x$ac_cv_func_getnameinfo" = xyes; then :
-  ISC_LWRES_GETNAMEINFOPROTO="#undef ISC_LWRES_GETNAMEINFOPROTO"
-else
-  ISC_LWRES_GETNAMEINFOPROTO="#define ISC_LWRES_GETNAMEINFOPROTO 1"
-fi
-
-ac_fn_c_check_func "$LINENO" "getaddrinfo" "ac_cv_func_getaddrinfo"
-if test "x$ac_cv_func_getaddrinfo" = xyes; then :
-  ISC_LWRES_GETADDRINFOPROTO="#undef ISC_LWRES_GETADDRINFOPROTO"
-	$as_echo "#define HAVE_GETADDRINFO 1" >>confdefs.h
-
-else
-  ISC_LWRES_GETADDRINFOPROTO="#define ISC_LWRES_GETADDRINFOPROTO 1"
-fi
-
-ac_fn_c_check_func "$LINENO" "gai_strerror" "ac_cv_func_gai_strerror"
-if test "x$ac_cv_func_gai_strerror" = xyes; then :
-  $as_echo "#define HAVE_GAISTRERROR 1" >>confdefs.h
-
-fi
-
-
-
-
-
-
-# Check whether --enable-getifaddrs was given.
-if test "${enable_getifaddrs+set}" = set; then :
-  enableval=$enable_getifaddrs; want_getifaddrs="$enableval"
-else
-  want_getifaddrs="yes"
-fi
-
-
-#
-# This interface iteration code for getifaddrs() will fall back to using
-# /proc/net/if_inet6 if getifaddrs() in glibc doesn't return any IPv6
-# addresses.
-#
-case $want_getifaddrs in
-glibc)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \"--enable-getifaddrs=glibc is no longer required\"" >&5
-$as_echo "$as_me: WARNING: \"--enable-getifaddrs=glibc is no longer required\"" >&2;}
-ac_fn_c_check_func "$LINENO" "getifaddrs" "ac_cv_func_getifaddrs"
-if test "x$ac_cv_func_getifaddrs" = xyes; then :
-  $as_echo "#define HAVE_GETIFADDRS 1" >>confdefs.h
-
-fi
-
-;;
-yes)
-ac_fn_c_check_func "$LINENO" "getifaddrs" "ac_cv_func_getifaddrs"
-if test "x$ac_cv_func_getifaddrs" = xyes; then :
-  $as_echo "#define HAVE_GETIFADDRS 1" >>confdefs.h
-
-fi
-
-;;
-no)
-;;
-esac
-
-#
-# Look for a sysctl call to get the list of network interfaces.
-#
-case $ac_cv_header_sys_sysctl_h in
-yes)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for interface list sysctl" >&5
-$as_echo_n "checking for interface list sysctl... " >&6; }
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-#include <sys/param.h>
-#include <sys/sysctl.h>
-#include <sys/socket.h>
-#ifdef NET_RT_IFLIST
-found_rt_iflist
-#endif
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  $EGREP "found_rt_iflist" >/dev/null 2>&1; then :
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-	 $as_echo "#define HAVE_IFLIST_SYSCTL 1" >>confdefs.h
-
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-rm -f conftest*
-
-;;
-esac
-
-#
-# Check for some other useful functions that are not ever-present.
-#
-
-# We test for strsep() using AC_TRY_LINK instead of AC_CHECK_FUNC
-# because AIX 4.3.3 with patches for bos.adt.include to version 4.3.3.77
-# reportedly defines strsep() without declaring it in <string.h> when
-# -D_LINUX_SOURCE_COMPAT is not defined [RT #2190], and
-# AC_CHECK_FUNC() incorrectly succeeds because it declares
-# the function itself.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for correctly declared strsep()" >&5
-$as_echo_n "checking for correctly declared strsep()... " >&6; }
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include <string.h>
-int
-main ()
-{
-char *sp; char *foo = strsep(&sp, ".");
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }; ISC_PLATFORM_NEEDSTRSEP="#undef ISC_PLATFORM_NEEDSTRSEP"
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }; ISC_PLATFORM_NEEDSTRSEP="#define ISC_PLATFORM_NEEDSTRSEP 1"
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-
-
-ac_fn_c_check_func "$LINENO" "memmove" "ac_cv_func_memmove"
-if test "x$ac_cv_func_memmove" = xyes; then :
-  ISC_PLATFORM_NEEDMEMMOVE="#undef ISC_PLATFORM_NEEDMEMMOVE"
-else
-  ISC_PLATFORM_NEEDMEMMOVE="#define ISC_PLATFORM_NEEDMEMMOVE 1"
-fi
-
-
-
-ac_fn_c_check_func "$LINENO" "strtoul" "ac_cv_func_strtoul"
-if test "x$ac_cv_func_strtoul" = xyes; then :
-  ISC_PLATFORM_NEEDSTRTOUL="#undef ISC_PLATFORM_NEEDSTRTOUL"
-	 LWRES_PLATFORM_NEEDSTRTOUL="#undef LWRES_PLATFORM_NEEDSTRTOUL"
-	 GENRANDOMLIB=""
-else
-  ISC_PLATFORM_NEEDSTRTOUL="#define ISC_PLATFORM_NEEDSTRTOUL 1"
-	 LWRES_PLATFORM_NEEDSTRTOUL="#define LWRES_PLATFORM_NEEDSTRTOUL 1"
-	 GENRANDOMLIB='${ISCLIBS}'
-fi
-
-
-
-
-
-ac_fn_c_check_func "$LINENO" "strlcpy" "ac_cv_func_strlcpy"
-if test "x$ac_cv_func_strlcpy" = xyes; then :
-  ISC_PLATFORM_NEEDSTRLCPY="#undef ISC_PLATFORM_NEEDSTRLCPY"
-else
-  ISC_PLATFORM_NEEDSTRLCPY="#define ISC_PLATFORM_NEEDSTRLCPY 1"
-fi
-
-
-
-ac_fn_c_check_func "$LINENO" "strlcat" "ac_cv_func_strlcat"
-if test "x$ac_cv_func_strlcat" = xyes; then :
-  ISC_PLATFORM_NEEDSTRLCAT="#undef ISC_PLATFORM_NEEDSTRLCAT"
-else
-  ISC_PLATFORM_NEEDSTRLCAT="#define ISC_PLATFORM_NEEDSTRLCAT 1"
-fi
-
-
-
-ISC_PRINT_OBJS=
-ISC_PRINT_SRCS=
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking sprintf" >&5
-$as_echo_n "checking sprintf... " >&6; }
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-#include <stdio.h>
-
-int
-main ()
-{
- char buf[2]; return(*sprintf(buf,"x"));
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-
-ISC_PRINT_OBJS="print.$O"
-ISC_PRINT_SRCS="print.c"
-ISC_PLATFORM_NEEDSPRINTF="#define ISC_PLATFORM_NEEDSPRINTF"
-LWRES_PLATFORM_NEEDSPRINTF="#define LWRES_PLATFORM_NEEDSPRINTF"
-
-else
-  ISC_PLATFORM_NEEDSPRINTF="#undef ISC_PLATFORM_NEEDSPRINTF"
- LWRES_PLATFORM_NEEDSPRINTF="#undef LWRES_PLATFORM_NEEDSPRINTF"
-
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-
-
-
-ac_fn_c_check_func "$LINENO" "vsnprintf" "ac_cv_func_vsnprintf"
-if test "x$ac_cv_func_vsnprintf" = xyes; then :
-  ISC_PLATFORM_NEEDVSNPRINTF="#undef ISC_PLATFORM_NEEDVSNPRINTF"
-	 LWRES_PLATFORM_NEEDVSNPRINTF="#undef LWRES_PLATFORM_NEEDVSNPRINTF"
-else
-  ISC_PRINT_OBJS="print.$O"
-	 ISC_PRINT_SRCS="print.c"
-	 ISC_PLATFORM_NEEDVSNPRINTF="#define ISC_PLATFORM_NEEDVSNPRINTF 1"
-	 LWRES_PLATFORM_NEEDVSNPRINTF="#define LWRES_PLATFORM_NEEDVSNPRINTF 1"
-fi
-
-
-
-ISC_EXTRA_OBJS="$ISC_EXTRA_OBJS $ISC_PRINT_OBJS"
-ISC_EXTRA_SRCS="$ISC_EXTRA_SRCS $ISC_PRINT_SRCS"
-
-ac_fn_c_check_func "$LINENO" "strerror" "ac_cv_func_strerror"
-if test "x$ac_cv_func_strerror" = xyes; then :
-  $as_echo "#define HAVE_STRERROR 1" >>confdefs.h
-
-fi
-
-
-
-
-
-#
-# Use our own SPNEGO implementation?
-#
-# Check whether --enable-isc-spnego was given.
-if test "${enable_isc_spnego+set}" = set; then :
-  enableval=$enable_isc_spnego;
-fi
-
-
-if test -n "$USE_GSSAPI"
-then
-	case "$enable_isc_spnego" in
-		yes|'')
-			USE_ISC_SPNEGO='-DUSE_ISC_SPNEGO'
-			DST_EXTRA_OBJS="$DST_EXTRA_OBJS spnego.$O"
-			DST_EXTRA_SRCS="$DST_EXTRA_SRCS spnego.c"
-			{ $as_echo "$as_me:${as_lineno-$LINENO}: result: using SPNEGO from lib/dns" >&5
-$as_echo "using SPNEGO from lib/dns" >&6; }
-			;;
-		no)
-			{ $as_echo "$as_me:${as_lineno-$LINENO}: result: using SPNEGO from GSSAPI library" >&5
-$as_echo "using SPNEGO from GSSAPI library" >&6; }
-			;;
-	esac
-fi
-
-
-
-
-
-
-# Determine the printf format characters to use when printing
-# values of type isc_int64_t. This will normally be "ll", but where
-# the compiler treats "long long" as a alias for "long" and printf
-# doesn't know about "long long" use "l".  Hopefully the sprintf
-# will produce a inconsistent result in the later case.  If the compiler
-# fails due to seeing "%lld" we fall back to "l".
-#
-# Digital Unix 4.0 (gcc?) (long long) is 64 bits as is its long. It uses
-# %ld even for (long long)/
-#
-# Win32 uses "%I64d", but that's defined elsewhere since we don't use
-# configure on Win32.
-#
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking printf format modifier for 64-bit integers" >&5
-$as_echo_n "checking printf format modifier for 64-bit integers... " >&6; }
-if test "$cross_compiling" = yes; then :
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: assuming target platform uses ll" >&5
-$as_echo "assuming target platform uses ll" >&6; }
-	ISC_PLATFORM_QUADFORMAT='#define ISC_PLATFORM_QUADFORMAT "ll"'
-	LWRES_PLATFORM_QUADFORMAT='#define LWRES_PLATFORM_QUADFORMAT "ll"'
-else
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-#include <stdio.h>
-main() {
-	long long int j = 0;
-	char buf[100];
-	buf[0] = 0;
-	sprintf(buf, "%lld", j);
-	exit((sizeof(long long int) != sizeof(long int))? 0 :
-	     (strcmp(buf, "0") != 0));
-}
-
-_ACEOF
-if ac_fn_c_try_run "$LINENO"; then :
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: ll" >&5
-$as_echo "ll" >&6; }
-	ISC_PLATFORM_QUADFORMAT='#define ISC_PLATFORM_QUADFORMAT "ll"'
-	LWRES_PLATFORM_QUADFORMAT='#define LWRES_PLATFORM_QUADFORMAT "ll"'
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: l" >&5
-$as_echo "l" >&6; }
-	ISC_PLATFORM_QUADFORMAT='#define ISC_PLATFORM_QUADFORMAT "l"'
-	LWRES_PLATFORM_QUADFORMAT='#define LWRES_PLATFORM_QUADFORMAT "l"'
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
-  conftest.$ac_objext conftest.beam conftest.$ac_ext
-fi
-
-
-
-
-#
-# Security Stuff
-#
-# Note it is very recommended to *not* disable chroot(),
-# this is only because chroot() was made obsolete by Posix.
-# Check whether --enable-chroot was given.
-if test "${enable_chroot+set}" = set; then :
-  enableval=$enable_chroot;
-fi
-
-case "$enable_chroot" in
-	yes|'')
-		for ac_func in chroot
-do :
-  ac_fn_c_check_func "$LINENO" "chroot" "ac_cv_func_chroot"
-if test "x$ac_cv_func_chroot" = xyes; then :
-  cat >>confdefs.h <<_ACEOF
-#define HAVE_CHROOT 1
-_ACEOF
-
-fi
-done
-
-		;;
-	no)
-		;;
-esac
-# Check whether --enable-linux-caps was given.
-if test "${enable_linux_caps+set}" = set; then :
-  enableval=$enable_linux_caps;
-fi
-
-case "$enable_linux_caps" in
-	yes|'')
-		for ac_header in linux/capability.h sys/capability.h
-do :
-  as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
-if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
-  cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-
-done
-
-		{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for cap_set_proc in -lcap" >&5
-$as_echo_n "checking for cap_set_proc in -lcap... " >&6; }
-if ${ac_cv_lib_cap_cap_set_proc+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lcap  $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char cap_set_proc ();
-int
-main ()
-{
-return cap_set_proc ();
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-  ac_cv_lib_cap_cap_set_proc=yes
-else
-  ac_cv_lib_cap_cap_set_proc=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_cap_cap_set_proc" >&5
-$as_echo "$ac_cv_lib_cap_cap_set_proc" >&6; }
-if test "x$ac_cv_lib_cap_cap_set_proc" = xyes; then :
-  cat >>confdefs.h <<_ACEOF
-#define HAVE_LIBCAP 1
-_ACEOF
-
-  LIBS="-lcap $LIBS"
-
-fi
-
-		;;
-	no)
-		;;
-esac
-for ac_header in sys/prctl.h
-do :
-  ac_fn_c_check_header_mongrel "$LINENO" "sys/prctl.h" "ac_cv_header_sys_prctl_h" "$ac_includes_default"
-if test "x$ac_cv_header_sys_prctl_h" = xyes; then :
-  cat >>confdefs.h <<_ACEOF
-#define HAVE_SYS_PRCTL_H 1
-_ACEOF
-
-fi
-
-done
-
-
-for ac_header in sys/un.h
-do :
-  ac_fn_c_check_header_mongrel "$LINENO" "sys/un.h" "ac_cv_header_sys_un_h" "$ac_includes_default"
-if test "x$ac_cv_header_sys_un_h" = xyes; then :
-  cat >>confdefs.h <<_ACEOF
-#define HAVE_SYS_UN_H 1
-_ACEOF
- ISC_PLATFORM_HAVESYSUNH="#define ISC_PLATFORM_HAVESYSUNH 1"
-
-else
-  ISC_PLATFORM_HAVESYSUNH="#undef ISC_PLATFORM_HAVESYSUNH"
-
-fi
-
-done
-
-
-
-case "$host" in
-*-solaris*)
-
-$as_echo "#define NEED_SECURE_DIRECTORY 1" >>confdefs.h
-
-	;;
-*-sunos*)
-
-$as_echo "#define NEED_SECURE_DIRECTORY 1" >>confdefs.h
-
-	;;
-esac
-
-#
-# Time Zone Stuff
-#
-ac_fn_c_check_func "$LINENO" "tzset" "ac_cv_func_tzset"
-if test "x$ac_cv_func_tzset" = xyes; then :
-  $as_echo "#define HAVE_TZSET 1" >>confdefs.h
-
-fi
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for optarg declaration" >&5
-$as_echo_n "checking for optarg declaration... " >&6; }
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-#include <unistd.h>
-
-int
-main ()
-{
-optarg = 0;
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-GEN_NEED_OPTARG="-DNEED_OPTARG=1"
-
-$as_echo "#define NEED_OPTARG 1" >>confdefs.h
-
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-
-#
-# BSD/OS, and perhaps some others, don't define rlim_t.
-#
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for type rlim_t" >&5
-$as_echo_n "checking for type rlim_t... " >&6; }
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-#include <sys/types.h>
-#include <sys/time.h>
-#include <sys/resource.h>
-int
-main ()
-{
-rlim_t rl = 19671212; return (0);
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
- ISC_PLATFORM_RLIMITTYPE="#define ISC_PLATFORM_RLIMITTYPE rlim_t"
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking type of rlim_cur" >&5
-$as_echo_n "checking type of rlim_cur... " >&6; }
-if test "$cross_compiling" = yes; then :
-
-
-# Check whether --with-rlimtype was given.
-if test "${with_rlimtype+set}" = set; then :
-  withval=$with_rlimtype; rlimtype="$withval"
-else
-  rlimtype="long long int"
-fi
-
-ISC_PLATFORM_RLIMITTYPE="#define ISC_PLATFORM_RLIMITTYPE $rlimtype"
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: cannot determine type of rlim_cur when cross compiling - assuming $rlimtype" >&5
-$as_echo "cannot determine type of rlim_cur when cross compiling - assuming $rlimtype" >&6; }
-else
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-#include <sys/types.h>
-#include <sys/time.h>
-#include <sys/resource.h>
-main() { struct rlimit r; exit(!(sizeof(r.rlim_cur) == sizeof(int)));}
-_ACEOF
-if ac_fn_c_try_run "$LINENO"; then :
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: int" >&5
-$as_echo "int" >&6; }
-ISC_PLATFORM_RLIMITTYPE="#define ISC_PLATFORM_RLIMITTYPE int"
-else
-
-if test "$cross_compiling" = yes; then :
-  as_fn_error $? "this cannot happen" "$LINENO" 5
-else
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-#include <sys/types.h>
-#include <sys/time.h>
-#include <sys/resource.h>
-main() { struct rlimit r; exit(!(sizeof(r.rlim_cur) == sizeof(long int)));}
-_ACEOF
-if ac_fn_c_try_run "$LINENO"; then :
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: long int" >&5
-$as_echo "long int" >&6; }
-ISC_PLATFORM_RLIMITTYPE="#define ISC_PLATFORM_RLIMITTYPE long int"
-else
-
-if test "$cross_compiling" = yes; then :
-  as_fn_error $? "this cannot happen" "$LINENO" 5
-else
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-#include <sys/types.h>
-#include <sys/time.h>
-#include <sys/resource.h>
-main() { struct rlimit r; exit((!sizeof(r.rlim_cur) == sizeof(long long int)));}
-_ACEOF
-if ac_fn_c_try_run "$LINENO"; then :
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: long long int" >&5
-$as_echo "long long int" >&6; }
-ISC_PLATFORM_RLIMITTYPE="#define ISC_PLATFORM_RLIMITTYPE long long int"
-else
-  as_fn_error $? "unable to determine sizeof rlim_cur" "$LINENO" 5
-
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
-  conftest.$ac_objext conftest.beam conftest.$ac_ext
-fi
-
-
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
-  conftest.$ac_objext conftest.beam conftest.$ac_ext
-fi
-
-
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
-  conftest.$ac_objext conftest.beam conftest.$ac_ext
-fi
-
-
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-
-
-#
-# Older HP-UX doesn't have gettune
-#
-case "$host" in
-  	*-hp-hpux*)
-		for ac_header in sys/dyntune.h
-do :
-  ac_fn_c_check_header_mongrel "$LINENO" "sys/dyntune.h" "ac_cv_header_sys_dyntune_h" "$ac_includes_default"
-if test "x$ac_cv_header_sys_dyntune_h" = xyes; then :
-  cat >>confdefs.h <<_ACEOF
-#define HAVE_SYS_DYNTUNE_H 1
-_ACEOF
-
-fi
-
-done
-
-		;;
-	*)
-		;;
-esac
-
-
-#
-# Compaq TruCluster requires more code for handling cluster IP aliases
-#
-case "$host" in
-	*-dec-osf*)
-		{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for clua_getaliasaddress in -lclua" >&5
-$as_echo_n "checking for clua_getaliasaddress in -lclua... " >&6; }
-if ${ac_cv_lib_clua_clua_getaliasaddress+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lclua  $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char clua_getaliasaddress ();
-int
-main ()
-{
-return clua_getaliasaddress ();
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-  ac_cv_lib_clua_clua_getaliasaddress=yes
-else
-  ac_cv_lib_clua_clua_getaliasaddress=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_clua_clua_getaliasaddress" >&5
-$as_echo "$ac_cv_lib_clua_clua_getaliasaddress" >&6; }
-if test "x$ac_cv_lib_clua_clua_getaliasaddress" = xyes; then :
-  LIBS="-lclua $LIBS"
-fi
-
-		ac_fn_c_check_func "$LINENO" "clua_getaliasaddress" "ac_cv_func_clua_getaliasaddress"
-if test "x$ac_cv_func_clua_getaliasaddress" = xyes; then :
-
-$as_echo "#define HAVE_TRUCLUSTER 1" >>confdefs.h
-
-fi
-
-		;;
-	*)
-		;;
-esac
-
-#
-# Some hosts need msg_namelen to match the size of the socket structure.
-# Some hosts don't set msg_namelen appropriately on return from recvmsg().
-#
-case $host in
-*os2*|*hp-mpeix*)
-
-$as_echo "#define BROKEN_RECVMSG 1" >>confdefs.h
-
-	;;
-esac
-
-#
-# Microsoft has their own way of handling shared libraries that requires
-# additional qualifiers on extern variables.  Unix systems don't need it.
-#
-
-ISC_PLATFORM_USEDECLSPEC="#undef ISC_PLATFORM_USEDECLSPEC"
-
-LWRES_PLATFORM_USEDECLSPEC="#undef LWRES_PLATFORM_USEDECLSPEC"
-
-IRS_PLATFORM_USEDECLSPEC="#undef IRS_PLATFORM_USEDECLSPEC"
-
-#
-# Random remaining OS-specific issues involving compiler warnings.
-# XXXDCL print messages to indicate some compensation is being done?
-#
-
-ISC_PLATFORM_BRACEPTHREADONCEINIT="#undef ISC_PLATFORM_BRACEPTHREADONCEINIT"
-
-case "$host" in
-	*-aix5.[123].*)
-		hack_shutup_pthreadonceinit=yes
-		;;
-	*-bsdi3.1*)
-		hack_shutup_sputaux=yes
-		;;
-	*-bsdi4.0*)
-		hack_shutup_sigwait=yes
-		hack_shutup_sputaux=yes
-		;;
-	*-bsdi4.[12]*)
-		hack_shutup_stdargcast=yes
-		;;
-	*-solaris2.[89])
-		hack_shutup_pthreadonceinit=yes
-		;;
-	*-solaris2.1[0-9])
-		cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
- #include <pthread.h>
-int
-main ()
-{
- static pthread_once_t once_test = { PTHREAD_ONCE_INIT };
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  hack_shutup_pthreadonceinit=yes
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-		;;
-esac
-
-case "$hack_shutup_pthreadonceinit" in
-	yes)
-		#
-		# Shut up PTHREAD_ONCE_INIT unbraced initializer warnings.
-		#
-		ISC_PLATFORM_BRACEPTHREADONCEINIT="#define ISC_PLATFORM_BRACEPTHREADONCEINIT 1"
-		;;
-esac
-
-case "$hack_shutup_sigwait" in
-	yes)
-		#
-		# Shut up a -Wmissing-prototypes warning for sigwait().
-		#
-		$as_echo "#define SHUTUP_SIGWAIT 1" >>confdefs.h
-
-		;;
-esac
-
-case "$hack_shutup_sputaux" in
-	yes)
-		#
-		# Shut up a -Wmissing-prototypes warning from <stdio.h>.
-		#
-		$as_echo "#define SHUTUP_SPUTAUX 1" >>confdefs.h
-
-		;;
-esac
-
-case "$hack_shutup_stdargcast" in
-	yes)
-		#
-		# Shut up a -Wcast-qual warning from va_start().
-		#
-		$as_echo "#define SHUTUP_STDARG_CAST 1" >>confdefs.h
-
-		;;
-esac
-
-for ac_header in strings.h
-do :
-  ac_fn_c_check_header_mongrel "$LINENO" "strings.h" "ac_cv_header_strings_h" "$ac_includes_default"
-if test "x$ac_cv_header_strings_h" = xyes; then :
-  cat >>confdefs.h <<_ACEOF
-#define HAVE_STRINGS_H 1
-_ACEOF
- ISC_PLATFORM_HAVESTRINGSH="#define ISC_PLATFORM_HAVESTRINGSH 1"
-
-else
-  ISC_PLATFORM_HAVESTRINGSH="#undef ISC_PLATFORM_HAVESTRINGSH"
-
-fi
-
-done
-
-
-
-#
-# Check for if_nametoindex() for IPv6 scoped addresses support
-#
-ac_fn_c_check_func "$LINENO" "if_nametoindex" "ac_cv_func_if_nametoindex"
-if test "x$ac_cv_func_if_nametoindex" = xyes; then :
-  ac_cv_have_if_nametoindex=yes
-else
-  ac_cv_have_if_nametoindex=no
-fi
-
-case $ac_cv_have_if_nametoindex in
-no)
-	case "$host" in
-	*-hp-hpux*)
-		{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for if_nametoindex in -lipv6" >&5
-$as_echo_n "checking for if_nametoindex in -lipv6... " >&6; }
-if ${ac_cv_lib_ipv6_if_nametoindex+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lipv6  $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char if_nametoindex ();
-int
-main ()
-{
-return if_nametoindex ();
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-  ac_cv_lib_ipv6_if_nametoindex=yes
-else
-  ac_cv_lib_ipv6_if_nametoindex=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_ipv6_if_nametoindex" >&5
-$as_echo "$ac_cv_lib_ipv6_if_nametoindex" >&6; }
-if test "x$ac_cv_lib_ipv6_if_nametoindex" = xyes; then :
-  ac_cv_have_if_nametoindex=yes
-				LIBS="-lipv6 $LIBS"
-fi
-
-	;;
-	esac
-esac
-case $ac_cv_have_if_nametoindex in
-yes)
-	ISC_PLATFORM_HAVEIFNAMETOINDEX="#define ISC_PLATFORM_HAVEIFNAMETOINDEX 1"
-	;;
-*)
-	ISC_PLATFORM_HAVEIFNAMETOINDEX="#undef ISC_PLATFORM_HAVEIFNAMETOINDEX"
-	;;
-esac
-
-
-for ac_func in nanosleep
-do :
-  ac_fn_c_check_func "$LINENO" "nanosleep" "ac_cv_func_nanosleep"
-if test "x$ac_cv_func_nanosleep" = xyes; then :
-  cat >>confdefs.h <<_ACEOF
-#define HAVE_NANOSLEEP 1
-_ACEOF
-
-fi
-done
-
-
-#
-# Machine architecture dependent features
-#
-# Check whether --enable-atomic was given.
-if test "${enable_atomic+set}" = set; then :
-  enableval=$enable_atomic; enable_atomic="$enableval"
-else
-  enable_atomic="autodetect"
-fi
-
-case "$enable_atomic" in
-	yes|''|autodetect)
-		case "$host" in
-		powerpc-ibm-aix*)
-			if test "X$GCC" = "Xyes"; then
-				{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if asm(\"isc\"); works" >&5
-$as_echo_n "checking if asm(\"isc\"); works... " >&6; }
-				cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-				main() { asm("ics"); exit(0); }
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-				 use_atomic=yes
-else
-
-				saved_cflags="$CFLAGS"
-				CFLAGS="$CFLAGS -Wa,-many"
-				if test "$cross_compiling" = yes; then :
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: cross compile, assume yes" >&5
-$as_echo "cross compile, assume yes" >&6; }
-				 CFLAGS="$saved_cflags"
-				 use_atomic=yes
-else
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-				main() { asm("ics"); exit(0); }
-
-_ACEOF
-if ac_fn_c_try_run "$LINENO"; then :
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes, required -Wa,-many" >&5
-$as_echo "yes, required -Wa,-many" >&6; }
-				 use_atomic=yes
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, use_atomic disabled" >&5
-$as_echo "no, use_atomic disabled" >&6; }
-				 CFLAGS="$saved_cflags"
-				 use_atomic=no
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
-  conftest.$ac_objext conftest.beam conftest.$ac_ext
-fi
-
-
-
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-			else
-				use_atomic=yes
-			fi
-			;;
-		*)
-			use_atomic=yes
-			;;
-		esac
-		;;
-	no)
-		use_atomic=no
-		arch=noatomic
-		;;
-esac
-
-ISC_PLATFORM_USEOSFASM="#undef ISC_PLATFORM_USEOSFASM"
-if test "$use_atomic" = "yes"; then
-	{ $as_echo "$as_me:${as_lineno-$LINENO}: checking architecture type for atomic operations" >&5
-$as_echo_n "checking architecture type for atomic operations... " >&6; }
-	have_atomic=yes		# set default
-	case "$host" in
-	i[3456]86-*)
-		# XXX: some old x86 architectures actually do not support
-		#      (some of) these operations.  Do we need stricter checks?
-                # The cast to long int works around a bug in the HP C Compiler
-# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
-# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
-# This bug is HP SR number 8606223364.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of void *" >&5
-$as_echo_n "checking size of void *... " >&6; }
-if ${ac_cv_sizeof_void_p+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (void *))" "ac_cv_sizeof_void_p"        "$ac_includes_default"; then :
-
-else
-  if test "$ac_cv_type_void_p" = yes; then
-     { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error 77 "cannot compute sizeof (void *)
-See \`config.log' for more details" "$LINENO" 5; }
-   else
-     ac_cv_sizeof_void_p=0
-   fi
-fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_void_p" >&5
-$as_echo "$ac_cv_sizeof_void_p" >&6; }
-
-
-
-cat >>confdefs.h <<_ACEOF
-#define SIZEOF_VOID_P $ac_cv_sizeof_void_p
-_ACEOF
-
-
-		if test $ac_cv_sizeof_void_p = 8; then
-			arch=x86_64
-			have_xaddq=yes
-		else
-			arch=x86_32
-		fi
-	;;
-	x86_64-*|amd64-*)
-                # The cast to long int works around a bug in the HP C Compiler
-# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
-# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
-# This bug is HP SR number 8606223364.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of void *" >&5
-$as_echo_n "checking size of void *... " >&6; }
-if ${ac_cv_sizeof_void_p+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (void *))" "ac_cv_sizeof_void_p"        "$ac_includes_default"; then :
-
-else
-  if test "$ac_cv_type_void_p" = yes; then
-     { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error 77 "cannot compute sizeof (void *)
-See \`config.log' for more details" "$LINENO" 5; }
-   else
-     ac_cv_sizeof_void_p=0
-   fi
-fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_void_p" >&5
-$as_echo "$ac_cv_sizeof_void_p" >&6; }
-
-
-
-cat >>confdefs.h <<_ACEOF
-#define SIZEOF_VOID_P $ac_cv_sizeof_void_p
-_ACEOF
-
-
-		if test $ac_cv_sizeof_void_p = 8; then
-			arch=x86_64
-			have_xaddq=yes
-		else
-			arch=x86_32
-		fi
-	;;
-	alpha*-*)
-		arch=alpha
-	;;
-	powerpc-*|powerpc64-*)
-		arch=powerpc
-	;;
-	mips-*|mipsel-*|mips64-*|mips64el-*)
-		arch=mips
-	;;
-	ia64-*)
-		arch=ia64
-	;;
-	*)
-		have_atomic=no
-		arch=noatomic
-	;;
-	esac
-	{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $arch" >&5
-$as_echo "$arch" >&6; }
-fi
-
-if test "$have_atomic" = "yes"; then
-	{ $as_echo "$as_me:${as_lineno-$LINENO}: checking compiler support for inline assembly code" >&5
-$as_echo_n "checking compiler support for inline assembly code... " >&6; }
-
-	compiler=generic
-	# Check whether the compiler supports the assembly syntax we provide.
-	if test "X$GCC" = "Xyes"; then
-		# GCC's ASM extension always works
-		compiler=gcc
-		if test $arch = "x86_64"; then
-			# We can share the same code for gcc with x86_32
-			arch=x86_32
-		fi
-		if test $arch = "powerpc"; then
-			#
-			# The MacOS (and maybe others) uses "r0" for register
-			# zero. Under linux/ibm it is "0" for register 0.
-			# Probe to see if we have a MacOS style assembler.
-			#
-			{ $as_echo "$as_me:${as_lineno-$LINENO}: checking Checking for MacOS style assembler syntax" >&5
-$as_echo_n "checking Checking for MacOS style assembler syntax... " >&6; }
-			cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-			__asm__ volatile ("li r0, 0x0\n"::);
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-
-			{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-			compiler="mac"
-			ISC_PLATFORM_USEMACASM="#define ISC_PLATFORM_USEMACASM 1"
-
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-		fi
-	else
-		case "$host" in
-		alpha*-dec-osf*)
-			# Tru64 compiler has its own syntax for inline
-			# assembly.
-			cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-#ifndef __DECC
-#error "unexpected compiler"
-#endif
-				return (0);
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  compiler=osf
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-		;;
-		powerpc-ibm-aix*)
-			compiler=aix
-		;;
-		esac
-	fi
-	case "$compiler" in
-	gcc)
-		ISC_PLATFORM_USEGCCASM="#define ISC_PLATFORM_USEGCCASM 1"
-		;;
-	osf)
-		ISC_PLATFORM_USEOSFASM="#define ISC_PLATFORM_USEOSFASM 1"
-		;;
-	aix)
-		;;
-	mac)
-		;;
-	*)
-		# See if the generic __asm function works.  If not,
-		# we need to disable the atomic operations.
-		cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-					__asm("nop")
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-  compiler="standard"
-		ISC_PLATFORM_USESTDASM="#define ISC_PLATFORM_USESTDASM 1"
-else
-  compiler="not supported (atomic operations disabled)"
-		have_atomic=no
-		arch=noatomic
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext;
-		;;
-	esac
-
-	{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $compiler" >&5
-$as_echo "$compiler" >&6; }
-fi
-
-if test "$have_atomic" = "yes"; then
-	ISC_PLATFORM_HAVEXADD="#define ISC_PLATFORM_HAVEXADD 1"
-	ISC_PLATFORM_HAVECMPXCHG="#define ISC_PLATFORM_HAVECMPXCHG 1"
-	ISC_PLATFORM_HAVEATOMICSTORE="#define ISC_PLATFORM_HAVEATOMICSTORE 1"
-else
-	ISC_PLATFORM_HAVEXADD="#undef ISC_PLATFORM_HAVEXADD"
-	ISC_PLATFORM_HAVECMPXCHG="#undef ISC_PLATFORM_HAVECMPXCHG"
-	ISC_PLATFORM_HAVEATOMICSTORE="#undef ISC_PLATFORM_HAVEATOMICSTORE"
-fi
-
-if test "$have_xaddq" = "yes"; then
-	ISC_PLATFORM_HAVEXADDQ="#define ISC_PLATFORM_HAVEXADDQ 1"
-else
-	ISC_PLATFORM_HAVEXADDQ="#undef ISC_PLATFORM_HAVEXADDQ"
-fi
-
-
-
-
-
-
-
-
-
-
-
-ISC_ARCH_DIR=$arch
-
-
-#
-# Activate "rrset-order fixed" or not?
-#
-# Check whether --enable-fixed-rrset was given.
-if test "${enable_fixed_rrset+set}" = set; then :
-  enableval=$enable_fixed_rrset; enable_fixed="$enableval"
-else
-  enable_fixed="no"
-fi
-
-case "$enable_fixed" in
-	yes)
-
-$as_echo "#define DNS_RDATASET_FIXED 1" >>confdefs.h
-
-		;;
-	no)
-		;;
-	*)
-		;;
-esac
-
-#
-# Enable response policy rewriting using NS IP addresses
-#
-# Check whether --enable-rpz-nsip was given.
-if test "${enable_rpz_nsip+set}" = set; then :
-  enableval=$enable_rpz_nsip; enable_nsip="$enableval"
-else
-  enable_nsip="yes"
-fi
-
-case "$enable_nsip" in
-	yes)
-
-$as_echo "#define ENABLE_RPZ_NSIP 1" >>confdefs.h
-
-		;;
-	no)
-		;;
-	*)
-		;;
-esac
-
-#
-# Enable response policy rewriting using NS name
-#
-# Check whether --enable-rpz-nsdname was given.
-if test "${enable_rpz_nsdname+set}" = set; then :
-  enableval=$enable_rpz_nsdname; enable_nsdname="$enableval"
-else
-  enable_nsdname="yes"
-fi
-
-case "$enable_nsdname" in
-	yes)
-
-$as_echo "#define ENABLE_RPZ_NSDNAME 1" >>confdefs.h
-
-		;;
-	no)
-		;;
-	*)
-		;;
-esac
-
-#
-# Activate "filter-aaaa-on-v4" or not?
-#
-# Check whether --enable-filter-aaaa was given.
-if test "${enable_filter_aaaa+set}" = set; then :
-  enableval=$enable_filter_aaaa; enable_filter="$enableval"
-else
-  enable_filter="no"
-fi
-
-case "$enable_filter" in
-	yes)
-
-$as_echo "#define ALLOW_FILTER_AAAA_ON_V4 1" >>confdefs.h
-
-		;;
-	no)
-		;;
-	*)
-		;;
-esac
-
-#
-#  The following sets up how non-blocking i/o is established.
-#  Sunos, cygwin and solaris 2.x (x<5) require special handling.
-#
-case "$host" in
-*-sunos*) $as_echo "#define PORT_NONBLOCK O_NDELAY" >>confdefs.h
-;;
-*-cygwin*) $as_echo "#define PORT_NONBLOCK O_NDELAY" >>confdefs.h
-;;
-*-solaris2.[01234])
-	$as_echo "#define PORT_NONBLOCK O_NONBLOCK" >>confdefs.h
-
-
-$as_echo "#define USE_FIONBIO_IOCTL 1" >>confdefs.h
-
-	;;
-*)
-$as_echo "#define PORT_NONBLOCK O_NONBLOCK" >>confdefs.h
-
-	;;
-esac
-#
-# Solaris 2.5.1 and earlier cannot bind() then connect() a TCP socket.
-# This prevents the source address being set.
-#
-case "$host" in
-*-solaris2.[012345]|*-solaris2.5.1)
-
-$as_echo "#define BROKEN_TCP_BIND_BEFORE_CONNECT 1" >>confdefs.h
-
-	;;
-esac
-#
-# The following sections deal with tools used for formatting
-# the documentation.  They are all optional, unless you are
-# a developer editing the documentation source.
-#
-
-#
-# Look for TeX.
-#
-
-for ac_prog in latex
-do
-  # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_LATEX+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  case $LATEX in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_LATEX="$LATEX" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_LATEX="$as_dir/$ac_word$ac_exec_ext"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-  ;;
-esac
-fi
-LATEX=$ac_cv_path_LATEX
-if test -n "$LATEX"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LATEX" >&5
-$as_echo "$LATEX" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-  test -n "$LATEX" && break
-done
-test -n "$LATEX" || LATEX="latex"
-
-
-
-for ac_prog in pdflatex
-do
-  # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_PDFLATEX+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  case $PDFLATEX in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_PDFLATEX="$PDFLATEX" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_PDFLATEX="$as_dir/$ac_word$ac_exec_ext"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-  ;;
-esac
-fi
-PDFLATEX=$ac_cv_path_PDFLATEX
-if test -n "$PDFLATEX"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PDFLATEX" >&5
-$as_echo "$PDFLATEX" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-  test -n "$PDFLATEX" && break
-done
-test -n "$PDFLATEX" || PDFLATEX="pdflatex"
-
-
-
-#
-# Look for w3m
-#
-
-for ac_prog in w3m
-do
-  # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_W3M+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  case $W3M in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_W3M="$W3M" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_W3M="$as_dir/$ac_word$ac_exec_ext"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-  ;;
-esac
-fi
-W3M=$ac_cv_path_W3M
-if test -n "$W3M"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $W3M" >&5
-$as_echo "$W3M" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-  test -n "$W3M" && break
-done
-test -n "$W3M" || W3M="w3m"
-
-
-
-#
-# Look for xsltproc (libxslt)
-#
-
-# Extract the first word of "xsltproc", so it can be a program name with args.
-set dummy xsltproc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_XSLTPROC+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  case $XSLTPROC in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_XSLTPROC="$XSLTPROC" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_XSLTPROC="$as_dir/$ac_word$ac_exec_ext"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-  test -z "$ac_cv_path_XSLTPROC" && ac_cv_path_XSLTPROC="xsltproc"
-  ;;
-esac
-fi
-XSLTPROC=$ac_cv_path_XSLTPROC
-if test -n "$XSLTPROC"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $XSLTPROC" >&5
-$as_echo "$XSLTPROC" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-
-
-#
-# Look for xmllint (libxml2)
-#
-
-# Extract the first word of "xmllint", so it can be a program name with args.
-set dummy xmllint; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_XMLLINT+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  case $XMLLINT in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_XMLLINT="$XMLLINT" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_XMLLINT="$as_dir/$ac_word$ac_exec_ext"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-  test -z "$ac_cv_path_XMLLINT" && ac_cv_path_XMLLINT="xmllint"
-  ;;
-esac
-fi
-XMLLINT=$ac_cv_path_XMLLINT
-if test -n "$XMLLINT"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $XMLLINT" >&5
-$as_echo "$XMLLINT" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-
-
-#
-# Look for Doxygen
-#
-
-# Extract the first word of "doxygen", so it can be a program name with args.
-set dummy doxygen; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_DOXYGEN+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  case $DOXYGEN in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_DOXYGEN="$DOXYGEN" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_DOXYGEN="$as_dir/$ac_word$ac_exec_ext"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-  test -z "$ac_cv_path_DOXYGEN" && ac_cv_path_DOXYGEN="doxygen"
-  ;;
-esac
-fi
-DOXYGEN=$ac_cv_path_DOXYGEN
-if test -n "$DOXYGEN"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DOXYGEN" >&5
-$as_echo "$DOXYGEN" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-
-
-#
-# Subroutine for searching for an ordinary file (e.g., a stylesheet)
-# in a number of directories:
-#
-#   NOM_PATH_FILE(VARIABLE, FILENAME, DIRECTORIES)
-#
-# If the file FILENAME is found in one of the DIRECTORIES, the shell
-# variable VARIABLE is defined to its absolute pathname.  Otherwise,
-# it is set to FILENAME, with no directory prefix (that's not terribly
-# useful, but looks less confusing in substitutions than leaving it
-# empty).  The variable VARIABLE will be substituted into output files.
-#
-
-
-
-#
-# Look for Docbook-XSL stylesheets.  Location probably varies by system.
-# If it's not explicitly specified, guess where it might be found, based on
-# where SGML stuff lives on some systems (FreeBSD is the only one we're sure
-# of at the moment).
-#
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Docbook-XSL path" >&5
-$as_echo_n "checking for Docbook-XSL path... " >&6; }
-
-# Check whether --with-docbook-xsl was given.
-if test "${with_docbook_xsl+set}" = set; then :
-  withval=$with_docbook_xsl; docbook_path="$withval"
-else
-  docbook_path="auto"
-fi
-
-case "$docbook_path" in
-auto)
-	{ $as_echo "$as_me:${as_lineno-$LINENO}: result: auto" >&5
-$as_echo "auto" >&6; }
-	docbook_xsl_trees="/usr/pkg/share/xsl/docbook /usr/local/share/xsl/docbook /usr/share/xsl/docbook /opt/local/share/xsl/docbook-xsl"
-	;;
-*)
-	docbook_xsl_trees="$withval"
-    	{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $docbook_xsl_trees" >&5
-$as_echo "$docbook_xsl_trees" >&6; }
-	;;
-esac
-
-#
-# Look for stylesheets we need.
-#
-
-
-XSLT_DOCBOOK_STYLE_HTML=""
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for html/docbook.xsl" >&5
-$as_echo_n "checking for html/docbook.xsl... " >&6; }
-for d in $docbook_xsl_trees
-do
-	f=$d/html/docbook.xsl
-	if test -f $f
-	then
-		XSLT_DOCBOOK_STYLE_HTML=$f
-		{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $f" >&5
-$as_echo "$f" >&6; }
-		break
-	fi
-done
-if test "X$XSLT_DOCBOOK_STYLE_HTML" = "X"
-then
-	{ $as_echo "$as_me:${as_lineno-$LINENO}: result: \"not found\"" >&5
-$as_echo "\"not found\"" >&6; };
-	XSLT_DOCBOOK_STYLE_HTML=html/docbook.xsl
-fi
-
-
-
-XSLT_DOCBOOK_STYLE_XHTML=""
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for xhtml/docbook.xsl" >&5
-$as_echo_n "checking for xhtml/docbook.xsl... " >&6; }
-for d in $docbook_xsl_trees
-do
-	f=$d/xhtml/docbook.xsl
-	if test -f $f
-	then
-		XSLT_DOCBOOK_STYLE_XHTML=$f
-		{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $f" >&5
-$as_echo "$f" >&6; }
-		break
-	fi
-done
-if test "X$XSLT_DOCBOOK_STYLE_XHTML" = "X"
-then
-	{ $as_echo "$as_me:${as_lineno-$LINENO}: result: \"not found\"" >&5
-$as_echo "\"not found\"" >&6; };
-	XSLT_DOCBOOK_STYLE_XHTML=xhtml/docbook.xsl
-fi
-
-
-
-XSLT_DOCBOOK_STYLE_MAN=""
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for manpages/docbook.xsl" >&5
-$as_echo_n "checking for manpages/docbook.xsl... " >&6; }
-for d in $docbook_xsl_trees
-do
-	f=$d/manpages/docbook.xsl
-	if test -f $f
-	then
-		XSLT_DOCBOOK_STYLE_MAN=$f
-		{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $f" >&5
-$as_echo "$f" >&6; }
-		break
-	fi
-done
-if test "X$XSLT_DOCBOOK_STYLE_MAN" = "X"
-then
-	{ $as_echo "$as_me:${as_lineno-$LINENO}: result: \"not found\"" >&5
-$as_echo "\"not found\"" >&6; };
-	XSLT_DOCBOOK_STYLE_MAN=manpages/docbook.xsl
-fi
-
-
-
-XSLT_DOCBOOK_CHUNK_HTML=""
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for html/chunk.xsl" >&5
-$as_echo_n "checking for html/chunk.xsl... " >&6; }
-for d in $docbook_xsl_trees
-do
-	f=$d/html/chunk.xsl
-	if test -f $f
-	then
-		XSLT_DOCBOOK_CHUNK_HTML=$f
-		{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $f" >&5
-$as_echo "$f" >&6; }
-		break
-	fi
-done
-if test "X$XSLT_DOCBOOK_CHUNK_HTML" = "X"
-then
-	{ $as_echo "$as_me:${as_lineno-$LINENO}: result: \"not found\"" >&5
-$as_echo "\"not found\"" >&6; };
-	XSLT_DOCBOOK_CHUNK_HTML=html/chunk.xsl
-fi
-
-
-
-XSLT_DOCBOOK_CHUNK_XHTML=""
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for xhtml/chunk.xsl" >&5
-$as_echo_n "checking for xhtml/chunk.xsl... " >&6; }
-for d in $docbook_xsl_trees
-do
-	f=$d/xhtml/chunk.xsl
-	if test -f $f
-	then
-		XSLT_DOCBOOK_CHUNK_XHTML=$f
-		{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $f" >&5
-$as_echo "$f" >&6; }
-		break
-	fi
-done
-if test "X$XSLT_DOCBOOK_CHUNK_XHTML" = "X"
-then
-	{ $as_echo "$as_me:${as_lineno-$LINENO}: result: \"not found\"" >&5
-$as_echo "\"not found\"" >&6; };
-	XSLT_DOCBOOK_CHUNK_XHTML=xhtml/chunk.xsl
-fi
-
-
-
-XSLT_DOCBOOK_CHUNKTOC_HTML=""
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for html/chunktoc.xsl" >&5
-$as_echo_n "checking for html/chunktoc.xsl... " >&6; }
-for d in $docbook_xsl_trees
-do
-	f=$d/html/chunktoc.xsl
-	if test -f $f
-	then
-		XSLT_DOCBOOK_CHUNKTOC_HTML=$f
-		{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $f" >&5
-$as_echo "$f" >&6; }
-		break
-	fi
-done
-if test "X$XSLT_DOCBOOK_CHUNKTOC_HTML" = "X"
-then
-	{ $as_echo "$as_me:${as_lineno-$LINENO}: result: \"not found\"" >&5
-$as_echo "\"not found\"" >&6; };
-	XSLT_DOCBOOK_CHUNKTOC_HTML=html/chunktoc.xsl
-fi
-
-
-
-XSLT_DOCBOOK_CHUNKTOC_XHTML=""
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for xhtml/chunktoc.xsl" >&5
-$as_echo_n "checking for xhtml/chunktoc.xsl... " >&6; }
-for d in $docbook_xsl_trees
-do
-	f=$d/xhtml/chunktoc.xsl
-	if test -f $f
-	then
-		XSLT_DOCBOOK_CHUNKTOC_XHTML=$f
-		{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $f" >&5
-$as_echo "$f" >&6; }
-		break
-	fi
-done
-if test "X$XSLT_DOCBOOK_CHUNKTOC_XHTML" = "X"
-then
-	{ $as_echo "$as_me:${as_lineno-$LINENO}: result: \"not found\"" >&5
-$as_echo "\"not found\"" >&6; };
-	XSLT_DOCBOOK_CHUNKTOC_XHTML=xhtml/chunktoc.xsl
-fi
-
-
-
-XSLT_DOCBOOK_MAKETOC_HTML=""
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for html/maketoc.xsl" >&5
-$as_echo_n "checking for html/maketoc.xsl... " >&6; }
-for d in $docbook_xsl_trees
-do
-	f=$d/html/maketoc.xsl
-	if test -f $f
-	then
-		XSLT_DOCBOOK_MAKETOC_HTML=$f
-		{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $f" >&5
-$as_echo "$f" >&6; }
-		break
-	fi
-done
-if test "X$XSLT_DOCBOOK_MAKETOC_HTML" = "X"
-then
-	{ $as_echo "$as_me:${as_lineno-$LINENO}: result: \"not found\"" >&5
-$as_echo "\"not found\"" >&6; };
-	XSLT_DOCBOOK_MAKETOC_HTML=html/maketoc.xsl
-fi
-
-
-
-XSLT_DOCBOOK_MAKETOC_XHTML=""
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for xhtml/maketoc.xsl" >&5
-$as_echo_n "checking for xhtml/maketoc.xsl... " >&6; }
-for d in $docbook_xsl_trees
-do
-	f=$d/xhtml/maketoc.xsl
-	if test -f $f
-	then
-		XSLT_DOCBOOK_MAKETOC_XHTML=$f
-		{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $f" >&5
-$as_echo "$f" >&6; }
-		break
-	fi
-done
-if test "X$XSLT_DOCBOOK_MAKETOC_XHTML" = "X"
-then
-	{ $as_echo "$as_me:${as_lineno-$LINENO}: result: \"not found\"" >&5
-$as_echo "\"not found\"" >&6; };
-	XSLT_DOCBOOK_MAKETOC_XHTML=xhtml/maketoc.xsl
-fi
-
-
-
-#
-# Same dance for db2latex
-#
-# No idea where this lives except on FreeBSD.
-#
-
-db2latex_xsl_trees="/usr/local/share"
-
-#
-# Look for stylesheets we need.
-#
-
-
-XSLT_DB2LATEX_STYLE=""
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for db2latex/xsl/docbook.xsl" >&5
-$as_echo_n "checking for db2latex/xsl/docbook.xsl... " >&6; }
-for d in $db2latex_xsl_trees
-do
-	f=$d/db2latex/xsl/docbook.xsl
-	if test -f $f
-	then
-		XSLT_DB2LATEX_STYLE=$f
-		{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $f" >&5
-$as_echo "$f" >&6; }
-		break
-	fi
-done
-if test "X$XSLT_DB2LATEX_STYLE" = "X"
-then
-	{ $as_echo "$as_me:${as_lineno-$LINENO}: result: \"not found\"" >&5
-$as_echo "\"not found\"" >&6; };
-	XSLT_DB2LATEX_STYLE=db2latex/xsl/docbook.xsl
-fi
-
-
-
-#
-# Look for "admonition" image directory.  Can't use NOM_PATH_FILE()
-# because it's a directory, so just do the same things, inline.
-#
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for db2latex/xsl/figures" >&5
-$as_echo_n "checking for db2latex/xsl/figures... " >&6; }
-for d in $db2latex_xsl_trees
-do
-	dd=$d/db2latex/xsl/figures
-	if test -d $dd
-	then
-		XSLT_DB2LATEX_ADMONITIONS=$dd
-		{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dd" >&5
-$as_echo "$dd" >&6; }
-		break
-	fi
-done
-if test "X$XSLT_DB2LATEX_ADMONITIONS" = "X"
-then
-	{ $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
-	XSLT_DB2LATEX_ADMONITIONS=db2latex/xsl/figures
-fi
-
-
-#
-# IDN support
-#
-
-# Check whether --with-idn was given.
-if test "${with_idn+set}" = set; then :
-  withval=$with_idn; use_idn="$withval"
-else
-  use_idn="no"
-fi
-
-case "$use_idn" in
-yes)
-	if test X$prefix = XNONE ; then
-		idn_path=/usr/local
-	else
-		idn_path=$prefix
-	fi
-	;;
-no)
-	;;
-*)
-	idn_path="$use_idn"
-	;;
-esac
-
-iconvinc=
-iconvlib=
-
-# Check whether --with-libiconv was given.
-if test "${with_libiconv+set}" = set; then :
-  withval=$with_libiconv; use_libiconv="$withval"
-else
-  use_libiconv="no"
-fi
-
-case "$use_libiconv" in
-yes)
-	if test X$prefix = XNONE ; then
-		iconvlib="-L/usr/local/lib -R/usr/local/lib -liconv"
-	else
-		iconvlib="-L$prefix/lib -R$prefix/lib -liconv"
-	fi
-	;;
-no)
-	iconvlib=
-	;;
-*)
-	iconvlib="-L$use_libiconv/lib -R$use_libiconv/lib -liconv"
-	;;
-esac
-
-
-# Check whether --with-iconv was given.
-if test "${with_iconv+set}" = set; then :
-  withval=$with_iconv; iconvlib="$withval"
-fi
-
-case "$iconvlib" in
-no)
-	iconvlib=
-	;;
-yes)
-	iconvlib=-liconv
-	;;
-esac
-
-
-# Check whether --with-idnlib was given.
-if test "${with_idnlib+set}" = set; then :
-  withval=$with_idnlib; idnlib="$withval"
-else
-  idnlib="no"
-fi
-
-if test "$idnlib" = yes; then
-	as_fn_error $? "You must specify ARG for --with-idnlib." "$LINENO" 5
-fi
-
-IDNLIBS=
-if test "$use_idn" != no; then
-
-$as_echo "#define WITH_IDN 1" >>confdefs.h
-
-	STD_CINCLUDES="$STD_CINCLUDES -I$idn_path/include"
-	if test "$idnlib" != no; then
-		IDNLIBS="$idnlib $iconvlib"
-	else
-		IDNLIBS="-L$idn_path/lib -lidnkit $iconvlib"
-	fi
-fi
-
-
-#
-# Check whether to build Automated Test Framework unit tests
-#
-
-# Check whether --with-atf was given.
-if test "${with_atf+set}" = set; then :
-  withval=$with_atf; atf="$withval"
-else
-  atf="no"
-fi
-
-if test "$atf" = yes; then
-	atf=`pwd`/unit/atf
-	ATFBUILD=atf-src
-
-	ac_config_commands="$ac_config_commands atf-config"
-
-	{ $as_echo "$as_me:${as_lineno-$LINENO}: result: building ATF from bind9/unit/atf-src" >&5
-$as_echo "building ATF from bind9/unit/atf-src" >&6; }
-fi
-
-ATFLIBS=
-if test "$atf" != no; then
-
-$as_echo "#define ATF_TEST 1" >>confdefs.h
-
-	STD_CINCLUDES="$STD_CINCLUDES -I$atf/include"
-	ATFBIN="$atf/bin"
-	ATFLIBS="-L$atf/lib -latf-c"
-	if test "$want_openssl_hash" = yes; then
-		ATFLIBS="-L$atf/lib -latf-c $DNS_CRYPTO_LIBS"
-	fi
-	UNITTESTS=tests
-fi
-
-
-
-
-for ac_header in locale.h
-do :
-  ac_fn_c_check_header_mongrel "$LINENO" "locale.h" "ac_cv_header_locale_h" "$ac_includes_default"
-if test "x$ac_cv_header_locale_h" = xyes; then :
-  cat >>confdefs.h <<_ACEOF
-#define HAVE_LOCALE_H 1
-_ACEOF
-
-fi
-
-done
-
-for ac_func in setlocale
-do :
-  ac_fn_c_check_func "$LINENO" "setlocale" "ac_cv_func_setlocale"
-if test "x$ac_cv_func_setlocale" = xyes; then :
-  cat >>confdefs.h <<_ACEOF
-#define HAVE_SETLOCALE 1
-_ACEOF
-
-fi
-done
-
-
-#
-# Substitutions
-#
-
-BIND9_TOP_BUILDDIR=`pwd`
-
-
-
-
-
-
-
-if test "X$srcdir" != "X"; then
-	BIND9_ISC_BUILDINCLUDE="-I${BIND9_TOP_BUILDDIR}/lib/isc/include"
-	BIND9_ISCCC_BUILDINCLUDE="-I${BIND9_TOP_BUILDDIR}/lib/isccc/include"
-	BIND9_ISCCFG_BUILDINCLUDE="-I${BIND9_TOP_BUILDDIR}/lib/isccfg/include"
-	BIND9_DNS_BUILDINCLUDE="-I${BIND9_TOP_BUILDDIR}/lib/dns/include"
-	BIND9_LWRES_BUILDINCLUDE="-I${BIND9_TOP_BUILDDIR}/lib/lwres/include"
-	BIND9_BIND9_BUILDINCLUDE="-I${BIND9_TOP_BUILDDIR}/lib/bind9/include"
-else
-	BIND9_ISC_BUILDINCLUDE=""
-	BIND9_ISCCC_BUILDINCLUDE=""
-	BIND9_ISCCFG_BUILDINCLUDE=""
-	BIND9_DNS_BUILDINCLUDE=""
-	BIND9_LWRES_BUILDINCLUDE=""
-	BIND9_BIND9_BUILDINCLUDE=""
-fi
-
-
-BIND9_MAKE_INCLUDES=$BIND9_TOP_BUILDDIR/make/includes
-
-
-BIND9_MAKE_RULES=$BIND9_TOP_BUILDDIR/make/rules
-
-. $srcdir/version
-BIND9_PRODUCT="PRODUCT=\"${PRODUCT}\""
-
-BIND9_DESCRIPTION="DESCRIPTION=\"${DESCRIPTION}\""
-
-BIND9_VERSION="VERSION=${MAJORVER}.${MINORVER}${PATCHVER:+.}${PATCHVER}${RELEASETYPE}${RELEASEVER}"
-
-
-BIND9_SRCID="SRCID=unset"
-if test -f $srcdir/srcid; then
-	. $srcdir/srcid
-	BIND9_SRCID="SRCID=$SRCID"
-fi
-
-
-if test -z "$ac_configure_args"; then
-	BIND9_CONFIGARGS="defaults"
-else
-	for a in $ac_configure_args
-	do
-		BIND9_CONFIGARGS="$BIND9_CONFIGARGS $a"
-	done
-fi
-BIND9_CONFIGARGS="`echo $BIND9_CONFIGARGS | sed 's/^ //'`"
-BIND9_CONFIGARGS="CONFIGARGS=${BIND9_CONFIGARGS}"
-
-
-
-LIBISC_API=$srcdir/lib/isc/api
-
-
-LIBISCCC_API=$srcdir/lib/isccc/api
-
-
-LIBISCCFG_API=$srcdir/lib/isccfg/api
-
-
-LIBDNS_API=$srcdir/lib/dns/api
-
-
-LIBBIND9_API=$srcdir/lib/bind9/api
-
-
-LIBLWRES_API=$srcdir/lib/lwres/api
-
-
-LIBIRS_API=$srcdir/lib/irs/api
-
-#
-# Configure any DLZ drivers.
-#
-# If config.dlz.in selects one or more DLZ drivers, it will set
-# CONTRIB_DLZ to a non-empty value, which will be our clue to
-# build DLZ drivers in contrib.
-#
-# This section has to come after the libtool stuff because it needs to
-# know how to name the driver object files.
-#
-
-CONTRIB_DLZ=""
-DLZ_DRIVER_INCLUDES=""
-DLZ_DRIVER_LIBS=""
-DLZ_DRIVER_SRCS=""
-DLZ_DRIVER_OBJS=""
-DLZ_SYSTEM_TEST=""
-
-#
-# Configure support for building a shared library object
-#
-# Even when libtool is available it can't always be relied upon
-# to build an object that can be dlopen()'ed, but this is necessary
-# for building the dlzexternal system test, so we'll try it the
-# old-fashioned way.
-#
-SO="so"
-SO_CFLAGS=""
-SO_LD=""
-SO_TARGETS=""
-
-
-# Check whether --with-dlopen was given.
-if test "${with_dlopen+set}" = set; then :
-  withval=$with_dlopen; dlopen="$withval"
-else
-  dlopen="yes"
-fi
-
-
-case $host in
-	*-sunos*) dlopen="no"
-		;;
-esac
-
-if test "$dlopen" = "yes"; then
-	{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
-$as_echo_n "checking for dlopen in -ldl... " >&6; }
-if ${ac_cv_lib_dl_dlopen+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldl  $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char dlopen ();
-int
-main ()
-{
-return dlopen ();
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-  ac_cv_lib_dl_dlopen=yes
-else
-  ac_cv_lib_dl_dlopen=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
-$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
-if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
-  have_dl=yes
-else
-  have_dl=no
-fi
-
-	if test "$have_dl" = "yes"; then
-		LIBS="-ldl $LIBS"
-	fi
-        for ac_func in dlopen dlclose dlsym
-do :
-  as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
-ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
-if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
-  cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
-_ACEOF
-
-else
-  dlopen=no
-fi
-done
-
-fi
-
-if test "$dlopen" = "yes"; then
-	case $host in
-		*-linux*)
-			SO_CFLAGS="-fPIC"
-			if test "$have_dl" = "yes"
-			then
-				if test "$use_libtool" = "yes"; then
-					SO_LD="${CC} -Xcompiler -shared"
-				else
-					SO_LD="${CC} -shared"
-				fi
-			else
-				SO_LD="ld -shared"
-			fi
-			;;
-		*-freebsd*|*-openbsd*|*-netbsd*)
-			SO_CFLAGS="-fpic"
-			SO_LD="ld -Bshareable -x"
-			;;
-		*-solaris*)
-			SO_CFLAGS="-KPIC"
-			SO_LD="ld -G -z text"
-                        ;;
-		*-hp-hpux*)
-			SO=sl
-			SO_CFLAGS="+z"
-			SO_LD="ld -b"
-                        ;;
-		*)
-			SO_CFLAGS="-fPIC"
-			;;
-	esac
-
-	if test "X$GCC" = "Xyes"; then
-		SO_CFLAGS="-fPIC"
-                test -n "$SO_LD" || SO_LD="${CC} -shared"
-	fi
-
-	# If we still don't know how to make shared objects, don't make any.
-	if test -n "$SO_LD"; then
-		SO_TARGETS="\${SO_TARGETS}"
-
-$as_echo "#define ISC_DLZ_DLOPEN 1" >>confdefs.h
-
-	fi
-fi
-
-
-
-
-
-
-# Copyright (C) 2005  Internet Systems Consortium, Inc. ("ISC")
-#
-# Permission to use, copy, modify, and distribute this software for any
-# purpose with or without fee is hereby granted, provided that the above
-# copyright notice and this permission notice appear in all copies.
-#
-# THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
-# REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
-# AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
-# INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
-# LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
-# OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-# PERFORMANCE OF THIS SOFTWARE.
-
-#
-# Shorthand.  Note quoting: DLZ_DRIVER_DIR expanded in Makefile, not here.
-#
-dlzdir='${DLZ_DRIVER_DIR}'
-
-#
-# Private autoconf macro to simplify configuring drivers:
-#
-#   DLZ_ADD_DRIVER(DEFINE, DRIVER, INCLUDES, LIBS)
-#
-# where:
-#   DEFINE is FOO (to define -DDLZ_FOO)
-#   DRIVER is dlz_foo_driver (sources without the .c)
-#   INCLUDES is any necessary include definitions
-#   LIBS is any necessary library definitions
-#
-
-
-#
-# Check for the various DLZ drivers
-#
-
-#
-# Was --with-dlz-postgres specified?
-#
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Postgres DLZ driver" >&5
-$as_echo_n "checking for Postgres DLZ driver... " >&6; }
-
-# Check whether --with-dlz_postgres was given.
-if test "${with_dlz_postgres+set}" = set; then :
-  withval=$with_dlz_postgres; use_dlz_postgres="$withval"
-else
-  use_dlz_postgres="no"
-fi
-
-
-if test "$use_dlz_postgres" = "yes"
-then
-	# User did not specify a path - guess it
-	# Ask Postgres to tell us where it is
-
-	for ac_prog in pg_config
-do
-  # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_PG_CONFIG+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  case $PG_CONFIG in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_PG_CONFIG="$PG_CONFIG" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_PG_CONFIG="$as_dir/$ac_word$ac_exec_ext"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-  ;;
-esac
-fi
-PG_CONFIG=$ac_cv_path_PG_CONFIG
-if test -n "$PG_CONFIG"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PG_CONFIG" >&5
-$as_echo "$PG_CONFIG" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-  test -n "$PG_CONFIG" && break
-done
-test -n "$PG_CONFIG" || PG_CONFIG="not found"
-
-
-	if test "$PG_CONFIG" != "not found"
-	then
-		use_dlz_postgres=`$PG_CONFIG --includedir`
-		use_dlz_postgres_lib=`$PG_CONFIG --libdir`
-	fi
-fi
-
-if test "$use_dlz_postgres" = "yes"
-then
-	# User did not specify path and Postgres didn't say - guess it
-
-	pgdirs="/usr /usr/local /usr/local/pgsql /usr/pkg"
-	for d in $pgdirs
-	do
-		if test -f $d/include/libpq-fe.h
-		then
-			use_dlz_postgres=$d/include
-			use_dlz_postgres_lib=$d/lib
-			break
-		fi
-	done
-fi
-
-if test "$use_dlz_postgres" = "yes"
-then
-	# Still no joy, give up
-
-	{ $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
-	as_fn_error $? "No pg_config and PostgreSQL was not found in any of $pgdirs; use --with-dlz-postgres=/path or put pg_config in your path" "$LINENO" 5
-fi
-
-case "$use_dlz_postgres" in
-	no)
-		{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-		;;
-	*)
-
-	CONTRIB_DLZ="$CONTRIB_DLZ -DDLZ_POSTGRES"
-	for i in dlz_postgres_driver
-	do
-		DLZ_DRIVER_SRCS="$DLZ_DRIVER_SRCS $dlzdir/$i.c"
-		DLZ_DRIVER_OBJS="$DLZ_DRIVER_OBJS $i.$O"
-	done
-	if test -n "-I$use_dlz_postgres"
-	then
-		DLZ_DRIVER_INCLUDES="$DLZ_DRIVER_INCLUDES -I$use_dlz_postgres"
-	fi
-	if test -n "-L$use_dlz_postgres_lib -lpq"
-	then
-		DLZ_DRIVER_LIBS="$DLZ_DRIVER_LIBS -L$use_dlz_postgres_lib -lpq"
-	fi
-
-
-		{ $as_echo "$as_me:${as_lineno-$LINENO}: result: using PostgreSQL from $use_dlz_postgres_lib and $use_dlz_postgres" >&5
-$as_echo "using PostgreSQL from $use_dlz_postgres_lib and $use_dlz_postgres" >&6; }
-		;;
-esac
-
-
-#
-# Was --with-dlz-mysql specified?
-#
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for MySQL DLZ driver" >&5
-$as_echo_n "checking for MySQL DLZ driver... " >&6; }
-
-# Check whether --with-dlz_mysql was given.
-if test "${with_dlz_mysql+set}" = set; then :
-  withval=$with_dlz_mysql; use_dlz_mysql="$withval"
-else
-  use_dlz_mysql="no"
-fi
-
-
-mysql_include=""
-mysql_lib=""
-if test "$use_dlz_mysql" = "yes"
-then
-	# User did not specify a path - guess it
-	mysqldirs="/usr /usr/local /usr/local/mysql /usr/pkg"
-	for d in $mysqldirs
-	do
-		if test -f $d/include/mysql/mysql.h
-		then
-			use_dlz_mysql=$d
-			mysql_include=$d/include/mysql
-			if test -d $d/lib/mysql
-			then
-				mysql_lib=$d/lib/mysql
-			else
-				mysql_lib=$d/lib
-			fi
-			break
-		elif test -f $d/include/mysql.h
-		then
-			use_dlz_mysql=$d
-			mysql_include=$d/include
-			if test -d $d/lib/mysql
-			then
-				mysql_lib=$d/lib/mysql
-			else
-				mysql_lib=$d/lib
-			fi
-			break
-		fi
-	done
-elif test "$use_dlz_mysql" != "no"
-then
-	d=$use_dlz_mysql
-	if test -f $d/include/mysql/mysql.h
-	then
-		mysql_include=$d/include/mysql
-		if test -d $d/lib/mysql
-		then
-			mysql_lib=$d/lib/mysql
-		else
-			mysql_lib=$d/lib
-		fi
-	elif test -f $d/include/mysql.h
-	then
-		mysql_include=$d/include
-		if test -d $d/lib/mysql
-		then
-			mysql_lib=$d/lib/mysql
-		else
-			mysql_lib=$d/lib
-		fi
-	fi
-fi
-
-if test "$use_dlz_mysql" = "yes"
-then
-	{ $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
-	as_fn_error $? "MySQL was not found in any of $mysqldirs; use --with-dlz-mysql=/path" "$LINENO" 5
-fi
-
-case "$use_dlz_mysql" in
-	no)
-		{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-		;;
-	*)
-
-	CONTRIB_DLZ="$CONTRIB_DLZ -DDLZ_MYSQL"
-	for i in dlz_mysql_driver
-	do
-		DLZ_DRIVER_SRCS="$DLZ_DRIVER_SRCS $dlzdir/$i.c"
-		DLZ_DRIVER_OBJS="$DLZ_DRIVER_OBJS $i.$O"
-	done
-	if test -n "-I${mysql_include}"
-	then
-		DLZ_DRIVER_INCLUDES="$DLZ_DRIVER_INCLUDES -I${mysql_include}"
-	fi
-	if test -n "-L${mysql_lib} -lmysqlclient -lz -lcrypt -lm"
-	then
-		DLZ_DRIVER_LIBS="$DLZ_DRIVER_LIBS -L${mysql_lib} -lmysqlclient -lz -lcrypt -lm"
-	fi
-
-
-		{ $as_echo "$as_me:${as_lineno-$LINENO}: result: using mysql from ${mysql_lib} and ${mysql_include}" >&5
-$as_echo "using mysql from ${mysql_lib} and ${mysql_include}" >&6; }
-		;;
-esac
-
-
-#
-# Was --with-dlz-bdb specified?
-#
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Berkeley DB DLZ driver" >&5
-$as_echo_n "checking for Berkeley DB DLZ driver... " >&6; }
-
-# Check whether --with-dlz_bdb was given.
-if test "${with_dlz_bdb+set}" = set; then :
-  withval=$with_dlz_bdb; use_dlz_bdb="$withval"
-else
-  use_dlz_bdb="no"
-fi
-
-
-case "$use_dlz_bdb" in
-	no)
-		{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-		;;
-	*)
-		if test "$use_dlz_bdb" = "yes"
-		then
-			# User did not specify a path - guess directories
-			bdbdirs="/usr/local /usr/pkg /usr"
-		elif test -d "$use_dlz_bdb"
-		then
-			# User specified directory and it exists
-			bdbdirs="$use_dlz_bdb"
-		else
-			{ $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
-			as_fn_error $? "path $use_dlz_bdb does not exist" "$LINENO" 5
-			bdbdirs=""
-		fi
-
-		# Use path we were given or guessed.  This is insanely
-		# complicated because we have to search for a bunch of
-		# platform-specific variations and have to check
-		# separately for include and library directories.
-
-		# Set both to yes, so we can check them later
-		dlz_bdb_inc="yes"
-		dlz_bdb_libs="yes"
-
-		for dd in $bdbdirs
-		do
-			# Skip nonexistant directories
-			if test ! -d "$dd"
-			then
-				continue
-			fi
-
-			# Check other locations for includes.
-			# Order is important (sigh).
-
-			bdb_incdirs="/ /db48/ /db47/ /db46/ /db45/ /db44/ /db43/ /db42/ /db41/ /db4/ /db/"
-			for d in $bdb_incdirs
-			do
-				if test -f "$dd/include${d}db.h"
-				then
-					dlz_bdb_inc="-I$dd/include${d}"
-					break
-				fi
-			done
-
-			# Give up on this directory if we couldn't
-			# find the include subdir
-
-			if test "$dlz_bdb_inc" = "yes"
-			then
-				continue
-			fi
-
-			# Look for libname other than libdb.so.
-			# Order is important (sigh).
-
-			bdb_libnames="db48 db-4.8 db47 db-4.7 db46 db-4.6 db45 db-4.5 db44 db-4.4 db43 db-4.3 db42 db-4.2 db41 db-4.1 db"
-			for d in $bdb_libnames
-			do
-				if test -f "$dd/lib/lib${d}.so"
-				then
-					if test "$dd" != "/usr"
-					then
-						dlz_bdb_libs="-L${dd}/lib "
-					else
-						dlz_bdb_libs=""
-					fi
-					dlz_bdb_libs="${dlz_bdb_libs}-l${d}"
-					break
-				fi
-			done
-
-			# If we found both incdir and lib, we're done
-			if test "$dlz_bdb_libs" != "yes"
-			then
-				break
-			fi
-
-			# Otherwise, we're starting over
-
-			dlz_bdb_inc="yes"
-			dlz_bdb_libs="yes"
-		done
-
-		# Done searching, now make sure we got everything.
-
-		if test "$dlz_bdb_inc" = "yes"
-		then
-			{ $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
-			as_fn_error $? "could not find Berkeley DB include directory" "$LINENO" 5
-		fi
-
-		if test "$dlz_bdb_libs" = "yes"
-		then
-			{ $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
-			as_fn_error $? "could not find Berkeley DB library" "$LINENO" 5
-		fi
-
-
-	CONTRIB_DLZ="$CONTRIB_DLZ -DDLZ_BDB"
-	for i in dlz_bdb_driver dlz_bdbhpt_driver
-	do
-		DLZ_DRIVER_SRCS="$DLZ_DRIVER_SRCS $dlzdir/$i.c"
-		DLZ_DRIVER_OBJS="$DLZ_DRIVER_OBJS $i.$O"
-	done
-	if test -n "$dlz_bdb_inc"
-	then
-		DLZ_DRIVER_INCLUDES="$DLZ_DRIVER_INCLUDES $dlz_bdb_inc"
-	fi
-	if test -n "$dlz_bdb_libs"
-	then
-		DLZ_DRIVER_LIBS="$DLZ_DRIVER_LIBS $dlz_bdb_libs"
-	fi
-
-
-		{ $as_echo "$as_me:${as_lineno-$LINENO}: result: using Berkeley DB: $dlz_bdb_inc $dlz_bdb_libs" >&5
-$as_echo "using Berkeley DB: $dlz_bdb_inc $dlz_bdb_libs" >&6; }
-
-		ac_config_files="$ac_config_files contrib/dlz/bin/dlzbdb/Makefile"
-
-		;;
-esac
-
-
-#
-# Was --with-dlz-filesystem specified?
-#
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for file system DLZ driver" >&5
-$as_echo_n "checking for file system DLZ driver... " >&6; }
-
-# Check whether --with-dlz_filesystem was given.
-if test "${with_dlz_filesystem+set}" = set; then :
-  withval=$with_dlz_filesystem; use_dlz_filesystem="$withval"
-else
-  use_dlz_filesystem="no"
-fi
-
-
-case "$use_dlz_filesystem" in
-	no)
-		{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-		;;
-	*)
-
-	CONTRIB_DLZ="$CONTRIB_DLZ -DDLZ_FILESYSTEM"
-	for i in dlz_filesystem_driver
-	do
-		DLZ_DRIVER_SRCS="$DLZ_DRIVER_SRCS $dlzdir/$i.c"
-		DLZ_DRIVER_OBJS="$DLZ_DRIVER_OBJS $i.$O"
-	done
-	if test -n ""
-	then
-		DLZ_DRIVER_INCLUDES="$DLZ_DRIVER_INCLUDES "
-	fi
-	if test -n ""
-	then
-		DLZ_DRIVER_LIBS="$DLZ_DRIVER_LIBS "
-	fi
-
-		DLZ_SYSTEM_TEST=filesystem
-		{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-		;;
-esac
-
-
-#
-# Was --with-dlz-ldap specified?
-#
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for LDAP DLZ driver" >&5
-$as_echo_n "checking for LDAP DLZ driver... " >&6; }
-
-# Check whether --with-dlz_ldap was given.
-if test "${with_dlz_ldap+set}" = set; then :
-  withval=$with_dlz_ldap; use_dlz_ldap="$withval"
-else
-  use_dlz_ldap="no"
-fi
-
-
-if test "$use_dlz_ldap" = "yes"
-then
-	# User did not specify a path - guess it
-	ldapdirs="/usr /usr/local /usr/pkg"
-	for d in $ldapdirs
-	do
-		if test -f $d/include/ldap.h
-		then
-			use_dlz_ldap=$d
-			break
-		fi
-	done
-fi
-
-if test "$use_dlz_ldap" = "yes"
-then
-	{ $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
-	as_fn_error $? "LDAP headers were not found in any of $ldapdirs; use --with-dlz-ldap=/path" "$LINENO" 5
-fi
-
-case "$use_dlz_ldap" in
-	no)
-		{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-		;;
-	*)
-
-	CONTRIB_DLZ="$CONTRIB_DLZ -DDLZ_LDAP"
-	for i in dlz_ldap_driver
-	do
-		DLZ_DRIVER_SRCS="$DLZ_DRIVER_SRCS $dlzdir/$i.c"
-		DLZ_DRIVER_OBJS="$DLZ_DRIVER_OBJS $i.$O"
-	done
-	if test -n "-I$use_dlz_ldap/include"
-	then
-		DLZ_DRIVER_INCLUDES="$DLZ_DRIVER_INCLUDES -I$use_dlz_ldap/include"
-	fi
-	if test -n "-L$use_dlz_ldap/lib -lldap -llber"
-	then
-		DLZ_DRIVER_LIBS="$DLZ_DRIVER_LIBS -L$use_dlz_ldap/lib -lldap -llber"
-	fi
-
-
-		{ $as_echo "$as_me:${as_lineno-$LINENO}: result: using LDAP from $use_dlz_ldap/lib and $use_dlz_ldap/include" >&5
-$as_echo "using LDAP from $use_dlz_ldap/lib and $use_dlz_ldap/include" >&6; }
-		;;
-esac
-
-
-#
-# Was --with-dlz-odbc specified?
-#
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ODBC DLZ driver" >&5
-$as_echo_n "checking for ODBC DLZ driver... " >&6; }
-
-# Check whether --with-dlz_odbc was given.
-if test "${with_dlz_odbc+set}" = set; then :
-  withval=$with_dlz_odbc; use_dlz_odbc="$withval"
-else
-  use_dlz_odbc="no"
-fi
-
-
-if test "$use_dlz_odbc" = "yes"
-then
-	# User did not specify a path - guess it
-	odbcdirs="/usr /usr/local /usr/pkg"
-	for d in $odbcdirs
-	do
-		if test -f $d/include/sql.h -a -f $d/lib/libodbc.a
-		then
-			use_dlz_odbc=$d
-			break
-		fi
-	done
-fi
-
-case "$use_dlz_odbc" in
-	no)
-		{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-		;;
-	yes)
-		{ $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
-		as_fn_error $? "ODBC headers were not found in any of $odbcdirs; use --with-dlz-odbc=/path" "$LINENO" 5
-		;;
-	*)
-
-	CONTRIB_DLZ="$CONTRIB_DLZ -DDLZ_ODBC"
-	for i in dlz_odbc_driver
-	do
-		DLZ_DRIVER_SRCS="$DLZ_DRIVER_SRCS $dlzdir/$i.c"
-		DLZ_DRIVER_OBJS="$DLZ_DRIVER_OBJS $i.$O"
-	done
-	if test -n "-I$use_dlz_odbc/include"
-	then
-		DLZ_DRIVER_INCLUDES="$DLZ_DRIVER_INCLUDES -I$use_dlz_odbc/include"
-	fi
-	if test -n "-L$use_dlz_odbc/lib -lodbc"
-	then
-		DLZ_DRIVER_LIBS="$DLZ_DRIVER_LIBS -L$use_dlz_odbc/lib -lodbc"
-	fi
-
-
-		{ $as_echo "$as_me:${as_lineno-$LINENO}: result: using ODBC from $use_dlz_odbc" >&5
-$as_echo "using ODBC from $use_dlz_odbc" >&6; }
-		;;
-esac
-
-
-#
-# Was --with-dlz-stub specified?
-#
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for stub DLZ driver" >&5
-$as_echo_n "checking for stub DLZ driver... " >&6; }
-
-# Check whether --with-dlz_stub was given.
-if test "${with_dlz_stub+set}" = set; then :
-  withval=$with_dlz_stub; use_dlz_stub="$withval"
-else
-  use_dlz_stub="no"
-fi
-
-
-case "$use_dlz_stub" in
-	no)
-		{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-		;;
-	*)
-
-
-	CONTRIB_DLZ="$CONTRIB_DLZ -DDLZ_STUB"
-	for i in dlz_stub_driver
-	do
-		DLZ_DRIVER_SRCS="$DLZ_DRIVER_SRCS $dlzdir/$i.c"
-		DLZ_DRIVER_OBJS="$DLZ_DRIVER_OBJS $i.$O"
-	done
-	if test -n ""
-	then
-		DLZ_DRIVER_INCLUDES="$DLZ_DRIVER_INCLUDES "
-	fi
-	if test -n ""
-	then
-		DLZ_DRIVER_LIBS="$DLZ_DRIVER_LIBS "
-	fi
-
-
-		{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-		;;
-esac
-
-# Add any additional DLZ drivers here.
-
-#
-# Finally, some generic stuff that applies to all drivers, assuming
-# we're compiling contrib DLZ drivers at all.
-#
-if test -n "$CONTRIB_DLZ"
-then
-        CONTRIB_DLZ="-DCONTRIB_DLZ $CONTRIB_DLZ"
-
-	#
-	# Where to find DLZ driver header files.
-	#
-	DLZ_DRIVER_INCLUDES="-I$dlzdir/include $DLZ_DRIVER_INCLUDES"
-
-	#
-	# Initialization and shutdown wrappers, helper functions.
-	#
-	DLZ_DRIVER_SRCS="$dlzdir/dlz_drivers.c $dlzdir/sdlz_helper.c $DLZ_DRIVER_SRCS"
-	DLZ_DRIVER_OBJS="dlz_drivers.$O sdlz_helper.$O $DLZ_DRIVER_OBJS"
-fi
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking contributed DLZ drivers" >&5
-$as_echo_n "checking contributed DLZ drivers... " >&6; }
-
-if test -n "$CONTRIB_DLZ"
-then
-	{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-	DLZ_DRIVER_RULES=contrib/dlz/drivers/rules
-	ac_config_files="$ac_config_files $DLZ_DRIVER_RULES"
-
-else
-	{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-	DLZ_DRIVER_RULES=/dev/null
-fi
-
-
-
-
-
-
-
-
-
-if test "$cross_compiling" = "yes"; then
-	if test -z "$BUILD_CC"; then
-		as_fn_error $? "BUILD_CC not set" "$LINENO" 5
-	fi
-	BUILD_CFLAGS="$BUILD_CFLAGS"
-	BUILD_CPPFLAGS="$BUILD_CPPFLAGS"
-	BUILD_LDFLAGS="$BUILD_LDFLAGS"
-	BUILD_LIBS="$BUILD_LIBS"
-else
-	BUILD_CC="$CC"
-	BUILD_CFLAGS="$CFLAGS"
-	BUILD_CPPFLAGS="$CPPFLAGS $GEN_NEED_OPTARG"
-	BUILD_LDFLAGS="$LDFLAGS"
-	BUILD_LIBS="$LIBS"
-fi
-
-NEWFLAGS=""
-for e in $BUILD_LDFLAGS ; do
-    case $e in
-	-L*)
-	    case $host_os in
-		netbsd*)
-		    ee=`echo $e | sed -e 's%^-L%-Wl,-rpath,%'`
-		    NEWFLAGS="$NEWFLAGS $e $ee"
-		    ;;
-		freebsd*)
-		    ee=`echo $e | sed -e 's%^-L%-Wl,-rpath,%'`
-		    NEWFLAGS="$NEWFLAGS $e $ee"
-		    ;;
-		solaris*)
-		    ee=`echo $e | sed -e 's%^-L%-R%'`
-		    NEWFLAGS="$NEWFLAGS $e $ee"
-		    ;;
-		*)
-		    NEWFLAGS="$NEWFLAGS $e"
-		    ;;
-		esac
-	    ;;
-	*)
-	    NEWFLAGS="$NEWFLAGS $e"
-	    ;;
-    esac
-done
-BUILD_LDFLAGS="$NEWFLAGS"
-
-NEWFLAGS=""
-for e in $DNS_GSSAPI_LIBS ; do
-    case $e in
-	-L*)
-	    case $host_os in
-		netbsd*)
-		    ee=`echo $e | sed -e 's%^-L%-Wl,-rpath,%'`
-		    NEWFLAGS="$NEWFLAGS $e $ee"
-		    ;;
-		freebsd*)
-		    ee=`echo $e | sed -e 's%^-L%-Wl,-rpath,%'`
-		    NEWFLAGS="$NEWFLAGS $e $ee"
-		    ;;
-		solaris*)
-		    ee=`echo $e | sed -e 's%^-L%-R%'`
-		    NEWFLAGS="$NEWFLAGS $e $ee"
-		    ;;
-		*)
-		    NEWFLAGS="$NEWFLAGS $e"
-		    ;;
-		esac
-	    ;;
-	*)
-	    NEWFLAGS="$NEWFLAGS $e"
-	    ;;
-    esac
-done
-DNS_GSSAPI_LIBS="$NEWFLAGS"
-
-NEWFLAGS=""
-for e in $DNS_CRYPTO_LIBS ; do
-    case $e in
-	-L*)
-	    case $host_os in
-		netbsd*)
-		    ee=`echo $e | sed -e 's%^-L%-Wl,-rpath,%'`
-		    NEWFLAGS="$NEWFLAGS $e $ee"
-		    ;;
-		freebsd*)
-		    ee=`echo $e | sed -e 's%^-L%-Wl,-rpath,%'`
-		    NEWFLAGS="$NEWFLAGS $e $ee"
-		    ;;
-		solaris*)
-		    ee=`echo $e | sed -e 's%^-L%-R%'`
-		    NEWFLAGS="$NEWFLAGS $e $ee"
-		    ;;
-		*)
-		    NEWFLAGS="$NEWFLAGS $e"
-		    ;;
-		esac
-	    ;;
-	*)
-	    NEWFLAGS="$NEWFLAGS $e"
-	    ;;
-    esac
-done
-DNS_CRYPTO_LIBS="$NEWFLAGS"
-
-
-
-
-
-
-
-#
-# Commands to run at the end of config.status.
-# Don't just put these into configure, it won't work right if somebody
-# runs config.status directly (which autoconf allows).
-#
-
-ac_config_commands="$ac_config_commands chmod"
-
-
-#
-# Files to configure.  These are listed here because we used to
-# specify them as arguments to AC_OUTPUT.  It's (now) ok to move these
-# elsewhere if there's a good reason for doing so.
-#
-
-ac_config_files="$ac_config_files make/Makefile make/mkdep Makefile bin/Makefile bin/check/Makefile bin/confgen/Makefile bin/confgen/unix/Makefile bin/dig/Makefile bin/dnssec/Makefile bin/named/Makefile bin/named/unix/Makefile bin/nsupdate/Makefile bin/pkcs11/Makefile bin/rndc/Makefile bin/tests/Makefile bin/tests/atomic/Makefile bin/tests/db/Makefile bin/tests/dst/Makefile bin/tests/dst/Kdh.+002+18602.key bin/tests/dst/Kdh.+002+18602.private bin/tests/dst/Kdh.+002+48957.key bin/tests/dst/Kdh.+002+48957.private bin/tests/dst/Ktest.+001+00002.key bin/tests/dst/Ktest.+001+54622.key bin/tests/dst/Ktest.+001+54622.private bin/tests/dst/Ktest.+003+23616.key bin/tests/dst/Ktest.+003+23616.private bin/tests/dst/Ktest.+003+49667.key bin/tests/dst/dst_2_data bin/tests/dst/t2_data_1 bin/tests/dst/t2_data_2 bin/tests/dst/t2_dsasig bin/tests/dst/t2_rsasig bin/tests/hashes/Makefile bin/tests/headerdep_test.sh bin/tests/master/Makefile bin/tests/mem/Makefile bin/tests/names/Makefile bin/tests/net/Makefile bin/tests/rbt/Makefile bin/tests/resolver/Makefile bin/tests/sockaddr/Makefile bin/tests/system/Makefile bin/tests/system/conf.sh bin/tests/system/dlz/prereq.sh bin/tests/system/dlzexternal/Makefile bin/tests/system/dlzexternal/ns1/named.conf bin/tests/system/ecdsa/prereq.sh bin/tests/system/filter-aaaa/Makefile bin/tests/system/gost/prereq.sh bin/tests/system/lwresd/Makefile bin/tests/system/rpz/Makefile bin/tests/system/tkey/Makefile bin/tests/system/tsiggss/Makefile bin/tests/tasks/Makefile bin/tests/timers/Makefile bin/tests/virtual-time/Makefile bin/tests/virtual-time/conf.sh bin/tools/Makefile contrib/check-secure-delegation.pl contrib/zone-edit.sh doc/Makefile doc/arm/Makefile doc/doxygen/Doxyfile doc/doxygen/Makefile doc/doxygen/doxygen-input-filter doc/misc/Makefile doc/xsl/Makefile doc/xsl/isc-docbook-chunk.xsl doc/xsl/isc-docbook-html.xsl doc/xsl/isc-docbook-latex.xsl doc/xsl/isc-manpage.xsl isc-config.sh lib/Makefile lib/bind9/Makefile lib/bind9/include/Makefile lib/bind9/include/bind9/Makefile lib/dns/M!
 akefile lib/dns/include/Makefile lib/dns/include/dns/Makefile lib/dns/include/dst/Makefile lib/dns/tests/Makefile lib/export/Makefile lib/export/dns/Makefile lib/export/dns/include/Makefile lib/export/dns/include/dns/Makefile lib/export/dns/include/dst/Makefile lib/export/irs/Makefile lib/export/irs/include/Makefile lib/export/irs/include/irs/Makefile lib/export/isc/$thread_dir/Makefile lib/export/isc/$thread_dir/include/Makefile lib/export/isc/$thread_dir/include/isc/Makefile lib/export/isc/Makefile lib/export/isc/include/Makefile lib/export/isc/include/isc/Makefile lib/export/isc/nls/Makefile lib/export/isc/unix/Makefile lib/export/isc/unix/include/Makefile lib/export/isc/unix/include/isc/Makefile lib/export/isccfg/Makefile lib/export/isccfg/include/Makefile lib/export/isccfg/include/isccfg/Makefile lib/export/samples/Makefile lib/export/samples/Makefile-postinstall lib/irs/Makefile lib/irs/include/Makefile lib/irs/include/irs/Makefile lib/irs/include/irs/netdb.h lib/irs/include/irs/platform.h lib/isc/$arch/Makefile lib/isc/$arch/include/Makefile lib/isc/$arch/include/isc/Makefile lib/isc/$thread_dir/Makefile lib/isc/$thread_dir/include/Makefile lib/isc/$thread_dir/include/isc/Makefile lib/isc/Makefile lib/isc/include/Makefile lib/isc/include/isc/Makefile lib/isc/include/isc/platform.h lib/isc/tests/Makefile lib/isc/nls/Makefile lib/isc/unix/Makefile lib/isc/unix/include/Makefile lib/isc/unix/include/isc/Makefile lib/isccc/Makefile lib/isccc/include/Makefile lib/isccc/include/isccc/Makefile lib/isccfg/Makefile lib/isccfg/include/Makefile lib/isccfg/include/isccfg/Makefile lib/lwres/Makefile lib/lwres/include/Makefile lib/lwres/include/lwres/Makefile lib/lwres/include/lwres/netdb.h lib/lwres/include/lwres/platform.h lib/lwres/man/Makefile lib/lwres/unix/Makefile lib/lwres/unix/include/Makefile lib/lwres/unix/include/lwres/Makefile lib/tests/Makefile lib/tests/include/Makefile lib/tests/include/tests/Makefile unit/Makefile unit/unittest.sh"
-
-
-#
-# Do it
-#
-
-cat >confcache <<\_ACEOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs, see configure's option --config-cache.
-# It is not useful on other systems.  If it contains results you don't
-# want to keep, you may remove or edit it.
-#
-# config.status only pays attention to the cache file if you give it
-# the --recheck option to rerun configure.
-#
-# `ac_cv_env_foo' variables (set or unset) will be overridden when
-# loading this file, other *unset* `ac_cv_foo' will be assigned the
-# following values.
-
-_ACEOF
-
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, we kill variables containing newlines.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(
-  for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
-    eval ac_val=\$$ac_var
-    case $ac_val in #(
-    *${as_nl}*)
-      case $ac_var in #(
-      *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
-$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
-      esac
-      case $ac_var in #(
-      _ | IFS | as_nl) ;; #(
-      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
-      *) { eval $ac_var=; unset $ac_var;} ;;
-      esac ;;
-    esac
-  done
-
-  (set) 2>&1 |
-    case $as_nl`(ac_space=' '; set) 2>&1` in #(
-    *${as_nl}ac_space=\ *)
-      # `set' does not quote correctly, so add quotes: double-quote
-      # substitution turns \\\\ into \\, and sed turns \\ into \.
-      sed -n \
-	"s/'/'\\\\''/g;
-	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
-      ;; #(
-    *)
-      # `set' quotes correctly as required by POSIX, so do not add quotes.
-      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
-      ;;
-    esac |
-    sort
-) |
-  sed '
-     /^ac_cv_env_/b end
-     t clear
-     :clear
-     s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
-     t end
-     s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
-     :end' >>confcache
-if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
-  if test -w "$cache_file"; then
-    if test "x$cache_file" != "x/dev/null"; then
-      { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
-$as_echo "$as_me: updating cache $cache_file" >&6;}
-      if test ! -f "$cache_file" || test -h "$cache_file"; then
-	cat confcache >"$cache_file"
-      else
-        case $cache_file in #(
-        */* | ?:*)
-	  mv -f confcache "$cache_file"$$ &&
-	  mv -f "$cache_file"$$ "$cache_file" ;; #(
-        *)
-	  mv -f confcache "$cache_file" ;;
-	esac
-      fi
-    fi
-  else
-    { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5
-$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
-  fi
-fi
-rm -f confcache
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-DEFS=-DHAVE_CONFIG_H
-
-ac_libobjs=
-ac_ltlibobjs=
-U=
-for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
-  # 1. Remove the extension, and $U if already installed.
-  ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
-  ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
-  # 2. Prepend LIBOBJDIR.  When used with automake>=1.10 LIBOBJDIR
-  #    will be set to the directory where LIBOBJS objects are built.
-  as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext"
-  as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo'
-done
-LIBOBJS=$ac_libobjs
-
-LTLIBOBJS=$ac_ltlibobjs
-
-
-
-
-: "${CONFIG_STATUS=./config.status}"
-ac_write_fail=0
-ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files $CONFIG_STATUS"
-{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5
-$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
-as_write_fail=0
-cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1
-#! $SHELL
-# Generated by $as_me.
-# Run this file to recreate the current configuration.
-# Compiler output produced by configure, useful for debugging
-# configure, is in config.log if it exists.
-
-debug=false
-ac_cs_recheck=false
-ac_cs_silent=false
-
-SHELL=\${CONFIG_SHELL-$SHELL}
-export SHELL
-_ASEOF
-cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1
-## -------------------- ##
-## M4sh Initialization. ##
-## -------------------- ##
-
-# Be more Bourne compatible
-DUALCASE=1; export DUALCASE # for MKS sh
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
-  emulate sh
-  NULLCMD=:
-  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
-  # is contrary to our usage.  Disable this feature.
-  alias -g '${1+"$@"}'='"$@"'
-  setopt NO_GLOB_SUBST
-else
-  case `(set -o) 2>/dev/null` in #(
-  *posix*) :
-    set -o posix ;; #(
-  *) :
-     ;;
-esac
-fi
-
-
-as_nl='
-'
-export as_nl
-# Printing a long string crashes Solaris 7 /usr/bin/printf.
-as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
-# Prefer a ksh shell builtin over an external printf program on Solaris,
-# but without wasting forks for bash or zsh.
-if test -z "$BASH_VERSION$ZSH_VERSION" \
-    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
-  as_echo='print -r --'
-  as_echo_n='print -rn --'
-elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
-  as_echo='printf %s\n'
-  as_echo_n='printf %s'
-else
-  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
-    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
-    as_echo_n='/usr/ucb/echo -n'
-  else
-    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
-    as_echo_n_body='eval
-      arg=$1;
-      case $arg in #(
-      *"$as_nl"*)
-	expr "X$arg" : "X\\(.*\\)$as_nl";
-	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
-      esac;
-      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
-    '
-    export as_echo_n_body
-    as_echo_n='sh -c $as_echo_n_body as_echo'
-  fi
-  export as_echo_body
-  as_echo='sh -c $as_echo_body as_echo'
-fi
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
-  PATH_SEPARATOR=:
-  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
-    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
-      PATH_SEPARATOR=';'
-  }
-fi
-
-
-# IFS
-# We need space, tab and new line, in precisely that order.  Quoting is
-# there to prevent editors from complaining about space-tab.
-# (If _AS_PATH_WALK were called with IFS unset, it would disable word
-# splitting by setting IFS to empty value.)
-IFS=" ""	$as_nl"
-
-# Find who we are.  Look in the path if we contain no directory separator.
-as_myself=
-case $0 in #((
-  *[\\/]* ) as_myself=$0 ;;
-  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-  done
-IFS=$as_save_IFS
-
-     ;;
-esac
-# We did not find ourselves, most probably we were run as `sh COMMAND'
-# in which case we are not to be found in the path.
-if test "x$as_myself" = x; then
-  as_myself=$0
-fi
-if test ! -f "$as_myself"; then
-  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
-  exit 1
-fi
-
-# Unset variables that we do not need and which cause bugs (e.g. in
-# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
-# suppresses any "Segmentation fault" message there.  '((' could
-# trigger a bug in pdksh 5.2.14.
-for as_var in BASH_ENV ENV MAIL MAILPATH
-do eval test x\${$as_var+set} = xset \
-  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
-done
-PS1='$ '
-PS2='> '
-PS4='+ '
-
-# NLS nuisances.
-LC_ALL=C
-export LC_ALL
-LANGUAGE=C
-export LANGUAGE
-
-# CDPATH.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-
-# as_fn_error STATUS ERROR [LINENO LOG_FD]
-# ----------------------------------------
-# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
-# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
-# script with STATUS, using 1 if that was 0.
-as_fn_error ()
-{
-  as_status=$1; test $as_status -eq 0 && as_status=1
-  if test "$4"; then
-    as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-    $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
-  fi
-  $as_echo "$as_me: error: $2" >&2
-  as_fn_exit $as_status
-} # as_fn_error
-
-
-# as_fn_set_status STATUS
-# -----------------------
-# Set $? to STATUS, without forking.
-as_fn_set_status ()
-{
-  return $1
-} # as_fn_set_status
-
-# as_fn_exit STATUS
-# -----------------
-# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
-as_fn_exit ()
-{
-  set +e
-  as_fn_set_status $1
-  exit $1
-} # as_fn_exit
-
-# as_fn_unset VAR
-# ---------------
-# Portably unset VAR.
-as_fn_unset ()
-{
-  { eval $1=; unset $1;}
-}
-as_unset=as_fn_unset
-# as_fn_append VAR VALUE
-# ----------------------
-# Append the text in VALUE to the end of the definition contained in VAR. Take
-# advantage of any shell optimizations that allow amortized linear growth over
-# repeated appends, instead of the typical quadratic growth present in naive
-# implementations.
-if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
-  eval 'as_fn_append ()
-  {
-    eval $1+=\$2
-  }'
-else
-  as_fn_append ()
-  {
-    eval $1=\$$1\$2
-  }
-fi # as_fn_append
-
-# as_fn_arith ARG...
-# ------------------
-# Perform arithmetic evaluation on the ARGs, and store the result in the
-# global $as_val. Take advantage of shells that can avoid forks. The arguments
-# must be portable across $(()) and expr.
-if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
-  eval 'as_fn_arith ()
-  {
-    as_val=$(( $* ))
-  }'
-else
-  as_fn_arith ()
-  {
-    as_val=`expr "$@" || test $? -eq 1`
-  }
-fi # as_fn_arith
-
-
-if expr a : '\(a\)' >/dev/null 2>&1 &&
-   test "X`expr 00001 : '.*\(...\)'`" = X001; then
-  as_expr=expr
-else
-  as_expr=false
-fi
-
-if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
-  as_basename=basename
-else
-  as_basename=false
-fi
-
-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
-  as_dirname=dirname
-else
-  as_dirname=false
-fi
-
-as_me=`$as_basename -- "$0" ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
-	 X"$0" : 'X\(//\)$' \| \
-	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X/"$0" |
-    sed '/^.*\/\([^/][^/]*\)\/*$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\/\(\/\/\)$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\/\(\/\).*/{
-	    s//\1/
-	    q
-	  }
-	  s/.*/./; q'`
-
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-ECHO_C= ECHO_N= ECHO_T=
-case `echo -n x` in #(((((
--n*)
-  case `echo 'xy\c'` in
-  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
-  xy)  ECHO_C='\c';;
-  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
-       ECHO_T='	';;
-  esac;;
-*)
-  ECHO_N='-n';;
-esac
-
-rm -f conf$$ conf$$.exe conf$$.file
-if test -d conf$$.dir; then
-  rm -f conf$$.dir/conf$$.file
-else
-  rm -f conf$$.dir
-  mkdir conf$$.dir 2>/dev/null
-fi
-if (echo >conf$$.file) 2>/dev/null; then
-  if ln -s conf$$.file conf$$ 2>/dev/null; then
-    as_ln_s='ln -s'
-    # ... but there are two gotchas:
-    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
-    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
-    # In both cases, we have to default to `cp -pR'.
-    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
-      as_ln_s='cp -pR'
-  elif ln conf$$.file conf$$ 2>/dev/null; then
-    as_ln_s=ln
-  else
-    as_ln_s='cp -pR'
-  fi
-else
-  as_ln_s='cp -pR'
-fi
-rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
-rmdir conf$$.dir 2>/dev/null
-
-
-# as_fn_mkdir_p
-# -------------
-# Create "$as_dir" as a directory, including parents if necessary.
-as_fn_mkdir_p ()
-{
-
-  case $as_dir in #(
-  -*) as_dir=./$as_dir;;
-  esac
-  test -d "$as_dir" || eval $as_mkdir_p || {
-    as_dirs=
-    while :; do
-      case $as_dir in #(
-      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
-      *) as_qdir=$as_dir;;
-      esac
-      as_dirs="'$as_qdir' $as_dirs"
-      as_dir=`$as_dirname -- "$as_dir" ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$as_dir" : 'X\(//\)[^/]' \| \
-	 X"$as_dir" : 'X\(//\)$' \| \
-	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$as_dir" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\/\)[^/].*/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\/\)$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\).*/{
-	    s//\1/
-	    q
-	  }
-	  s/.*/./; q'`
-      test -d "$as_dir" && break
-    done
-    test -z "$as_dirs" || eval "mkdir $as_dirs"
-  } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
-
-
-} # as_fn_mkdir_p
-if mkdir -p . 2>/dev/null; then
-  as_mkdir_p='mkdir -p "$as_dir"'
-else
-  test -d ./-p && rmdir ./-p
-  as_mkdir_p=false
-fi
-
-
-# as_fn_executable_p FILE
-# -----------------------
-# Test if FILE is an executable regular file.
-as_fn_executable_p ()
-{
-  test -f "$1" && test -x "$1"
-} # as_fn_executable_p
-as_test_x='test -x'
-as_executable_p=as_fn_executable_p
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
-
-exec 6>&1
-## ----------------------------------- ##
-## Main body of $CONFIG_STATUS script. ##
-## ----------------------------------- ##
-_ASEOF
-test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-# Save the log message, to keep $0 and so on meaningful, and to
-# report actual input values of CONFIG_FILES etc. instead of their
-# values after options handling.
-ac_log="
-This file was extended by $as_me, which was
-generated by GNU Autoconf 2.69.  Invocation command line was
-
-  CONFIG_FILES    = $CONFIG_FILES
-  CONFIG_HEADERS  = $CONFIG_HEADERS
-  CONFIG_LINKS    = $CONFIG_LINKS
-  CONFIG_COMMANDS = $CONFIG_COMMANDS
-  $ $0 $@
-
-on `(hostname || uname -n) 2>/dev/null | sed 1q`
-"
-
-_ACEOF
-
-case $ac_config_files in *"
-"*) set x $ac_config_files; shift; ac_config_files=$*;;
-esac
-
-case $ac_config_headers in *"
-"*) set x $ac_config_headers; shift; ac_config_headers=$*;;
-esac
-
-
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-# Files that config.status was made for.
-config_files="$ac_config_files"
-config_headers="$ac_config_headers"
-config_commands="$ac_config_commands"
-
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-ac_cs_usage="\
-\`$as_me' instantiates files and other configuration actions
-from templates according to the current configuration.  Unless the files
-and actions are specified as TAGs, all are instantiated by default.
-
-Usage: $0 [OPTION]... [TAG]...
-
-  -h, --help       print this help, then exit
-  -V, --version    print version number and configuration settings, then exit
-      --config     print configuration, then exit
-  -q, --quiet, --silent
-                   do not print progress messages
-  -d, --debug      don't remove temporary files
-      --recheck    update $as_me by reconfiguring in the same conditions
-      --file=FILE[:TEMPLATE]
-                   instantiate the configuration file FILE
-      --header=FILE[:TEMPLATE]
-                   instantiate the configuration header FILE
-
-Configuration files:
-$config_files
-
-Configuration headers:
-$config_headers
-
-Configuration commands:
-$config_commands
-
-Report bugs to the package provider."
-
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
-ac_cs_version="\\
-config.status
-configured by $0, generated by GNU Autoconf 2.69,
-  with options \\"\$ac_cs_config\\"
-
-Copyright (C) 2012 Free Software Foundation, Inc.
-This config.status script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it."
-
-ac_pwd='$ac_pwd'
-srcdir='$srcdir'
-INSTALL='$INSTALL'
-AWK='$AWK'
-test -n "\$AWK" || AWK=awk
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-# The default lists apply if the user does not specify any file.
-ac_need_defaults=:
-while test $# != 0
-do
-  case $1 in
-  --*=?*)
-    ac_option=`expr "X$1" : 'X\([^=]*\)='`
-    ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
-    ac_shift=:
-    ;;
-  --*=)
-    ac_option=`expr "X$1" : 'X\([^=]*\)='`
-    ac_optarg=
-    ac_shift=:
-    ;;
-  *)
-    ac_option=$1
-    ac_optarg=$2
-    ac_shift=shift
-    ;;
-  esac
-
-  case $ac_option in
-  # Handling of the options.
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    ac_cs_recheck=: ;;
-  --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
-    $as_echo "$ac_cs_version"; exit ;;
-  --config | --confi | --conf | --con | --co | --c )
-    $as_echo "$ac_cs_config"; exit ;;
-  --debug | --debu | --deb | --de | --d | -d )
-    debug=: ;;
-  --file | --fil | --fi | --f )
-    $ac_shift
-    case $ac_optarg in
-    *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
-    '') as_fn_error $? "missing file argument" ;;
-    esac
-    as_fn_append CONFIG_FILES " '$ac_optarg'"
-    ac_need_defaults=false;;
-  --header | --heade | --head | --hea )
-    $ac_shift
-    case $ac_optarg in
-    *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
-    esac
-    as_fn_append CONFIG_HEADERS " '$ac_optarg'"
-    ac_need_defaults=false;;
-  --he | --h)
-    # Conflict between --help and --header
-    as_fn_error $? "ambiguous option: \`$1'
-Try \`$0 --help' for more information.";;
-  --help | --hel | -h )
-    $as_echo "$ac_cs_usage"; exit ;;
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil | --si | --s)
-    ac_cs_silent=: ;;
-
-  # This is an error.
-  -*) as_fn_error $? "unrecognized option: \`$1'
-Try \`$0 --help' for more information." ;;
-
-  *) as_fn_append ac_config_targets " $1"
-     ac_need_defaults=false ;;
-
-  esac
-  shift
-done
-
-ac_configure_extra_args=
-
-if $ac_cs_silent; then
-  exec 6>/dev/null
-  ac_configure_extra_args="$ac_configure_extra_args --silent"
-fi
-
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-if \$ac_cs_recheck; then
-  set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
-  shift
-  \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
-  CONFIG_SHELL='$SHELL'
-  export CONFIG_SHELL
-  exec "\$@"
-fi
-
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-exec 5>>config.log
-{
-  echo
-  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
-## Running $as_me. ##
-_ASBOX
-  $as_echo "$ac_log"
-} >&5
-
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-#
-# INIT-COMMANDS
-#
-
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-sed_quote_subst='$sed_quote_subst'
-double_quote_subst='$double_quote_subst'
-delay_variable_subst='$delay_variable_subst'
-macro_version='`$ECHO "$macro_version" | $SED "$delay_single_quote_subst"`'
-macro_revision='`$ECHO "$macro_revision" | $SED "$delay_single_quote_subst"`'
-enable_shared='`$ECHO "$enable_shared" | $SED "$delay_single_quote_subst"`'
-enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`'
-pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`'
-enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`'
-SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`'
-ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`'
-PATH_SEPARATOR='`$ECHO "$PATH_SEPARATOR" | $SED "$delay_single_quote_subst"`'
-host_alias='`$ECHO "$host_alias" | $SED "$delay_single_quote_subst"`'
-host='`$ECHO "$host" | $SED "$delay_single_quote_subst"`'
-host_os='`$ECHO "$host_os" | $SED "$delay_single_quote_subst"`'
-build_alias='`$ECHO "$build_alias" | $SED "$delay_single_quote_subst"`'
-build='`$ECHO "$build" | $SED "$delay_single_quote_subst"`'
-build_os='`$ECHO "$build_os" | $SED "$delay_single_quote_subst"`'
-SED='`$ECHO "$SED" | $SED "$delay_single_quote_subst"`'
-Xsed='`$ECHO "$Xsed" | $SED "$delay_single_quote_subst"`'
-GREP='`$ECHO "$GREP" | $SED "$delay_single_quote_subst"`'
-EGREP='`$ECHO "$EGREP" | $SED "$delay_single_quote_subst"`'
-FGREP='`$ECHO "$FGREP" | $SED "$delay_single_quote_subst"`'
-LD='`$ECHO "$LD" | $SED "$delay_single_quote_subst"`'
-NM='`$ECHO "$NM" | $SED "$delay_single_quote_subst"`'
-LN_S='`$ECHO "$LN_S" | $SED "$delay_single_quote_subst"`'
-max_cmd_len='`$ECHO "$max_cmd_len" | $SED "$delay_single_quote_subst"`'
-ac_objext='`$ECHO "$ac_objext" | $SED "$delay_single_quote_subst"`'
-exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`'
-lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`'
-lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`'
-lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`'
-lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_quote_subst"`'
-lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`'
-reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`'
-reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`'
-OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`'
-deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`'
-file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`'
-file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`'
-want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`'
-DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`'
-sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`'
-AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`'
-AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`'
-archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`'
-STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`'
-RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`'
-old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`'
-old_postuninstall_cmds='`$ECHO "$old_postuninstall_cmds" | $SED "$delay_single_quote_subst"`'
-old_archive_cmds='`$ECHO "$old_archive_cmds" | $SED "$delay_single_quote_subst"`'
-lock_old_archive_extraction='`$ECHO "$lock_old_archive_extraction" | $SED "$delay_single_quote_subst"`'
-CC='`$ECHO "$CC" | $SED "$delay_single_quote_subst"`'
-CFLAGS='`$ECHO "$CFLAGS" | $SED "$delay_single_quote_subst"`'
-compiler='`$ECHO "$compiler" | $SED "$delay_single_quote_subst"`'
-GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`'
-lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`'
-lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`'
-lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`'
-lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`'
-nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`'
-lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`'
-objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`'
-MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`'
-lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`'
-lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`'
-lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`'
-lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`'
-lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`'
-need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`'
-MANIFEST_TOOL='`$ECHO "$MANIFEST_TOOL" | $SED "$delay_single_quote_subst"`'
-DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`'
-NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`'
-LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`'
-OTOOL='`$ECHO "$OTOOL" | $SED "$delay_single_quote_subst"`'
-OTOOL64='`$ECHO "$OTOOL64" | $SED "$delay_single_quote_subst"`'
-libext='`$ECHO "$libext" | $SED "$delay_single_quote_subst"`'
-shrext_cmds='`$ECHO "$shrext_cmds" | $SED "$delay_single_quote_subst"`'
-extract_expsyms_cmds='`$ECHO "$extract_expsyms_cmds" | $SED "$delay_single_quote_subst"`'
-archive_cmds_need_lc='`$ECHO "$archive_cmds_need_lc" | $SED "$delay_single_quote_subst"`'
-enable_shared_with_static_runtimes='`$ECHO "$enable_shared_with_static_runtimes" | $SED "$delay_single_quote_subst"`'
-export_dynamic_flag_spec='`$ECHO "$export_dynamic_flag_spec" | $SED "$delay_single_quote_subst"`'
-whole_archive_flag_spec='`$ECHO "$whole_archive_flag_spec" | $SED "$delay_single_quote_subst"`'
-compiler_needs_object='`$ECHO "$compiler_needs_object" | $SED "$delay_single_quote_subst"`'
-old_archive_from_new_cmds='`$ECHO "$old_archive_from_new_cmds" | $SED "$delay_single_quote_subst"`'
-old_archive_from_expsyms_cmds='`$ECHO "$old_archive_from_expsyms_cmds" | $SED "$delay_single_quote_subst"`'
-archive_cmds='`$ECHO "$archive_cmds" | $SED "$delay_single_quote_subst"`'
-archive_expsym_cmds='`$ECHO "$archive_expsym_cmds" | $SED "$delay_single_quote_subst"`'
-module_cmds='`$ECHO "$module_cmds" | $SED "$delay_single_quote_subst"`'
-module_expsym_cmds='`$ECHO "$module_expsym_cmds" | $SED "$delay_single_quote_subst"`'
-with_gnu_ld='`$ECHO "$with_gnu_ld" | $SED "$delay_single_quote_subst"`'
-allow_undefined_flag='`$ECHO "$allow_undefined_flag" | $SED "$delay_single_quote_subst"`'
-no_undefined_flag='`$ECHO "$no_undefined_flag" | $SED "$delay_single_quote_subst"`'
-hardcode_libdir_flag_spec='`$ECHO "$hardcode_libdir_flag_spec" | $SED "$delay_single_quote_subst"`'
-hardcode_libdir_separator='`$ECHO "$hardcode_libdir_separator" | $SED "$delay_single_quote_subst"`'
-hardcode_direct='`$ECHO "$hardcode_direct" | $SED "$delay_single_quote_subst"`'
-hardcode_direct_absolute='`$ECHO "$hardcode_direct_absolute" | $SED "$delay_single_quote_subst"`'
-hardcode_minus_L='`$ECHO "$hardcode_minus_L" | $SED "$delay_single_quote_subst"`'
-hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_quote_subst"`'
-hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`'
-inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`'
-link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`'
-always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`'
-export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`'
-exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`'
-include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`'
-prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`'
-postlink_cmds='`$ECHO "$postlink_cmds" | $SED "$delay_single_quote_subst"`'
-file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`'
-variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`'
-need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`'
-need_version='`$ECHO "$need_version" | $SED "$delay_single_quote_subst"`'
-version_type='`$ECHO "$version_type" | $SED "$delay_single_quote_subst"`'
-runpath_var='`$ECHO "$runpath_var" | $SED "$delay_single_quote_subst"`'
-shlibpath_var='`$ECHO "$shlibpath_var" | $SED "$delay_single_quote_subst"`'
-shlibpath_overrides_runpath='`$ECHO "$shlibpath_overrides_runpath" | $SED "$delay_single_quote_subst"`'
-libname_spec='`$ECHO "$libname_spec" | $SED "$delay_single_quote_subst"`'
-library_names_spec='`$ECHO "$library_names_spec" | $SED "$delay_single_quote_subst"`'
-soname_spec='`$ECHO "$soname_spec" | $SED "$delay_single_quote_subst"`'
-install_override_mode='`$ECHO "$install_override_mode" | $SED "$delay_single_quote_subst"`'
-postinstall_cmds='`$ECHO "$postinstall_cmds" | $SED "$delay_single_quote_subst"`'
-postuninstall_cmds='`$ECHO "$postuninstall_cmds" | $SED "$delay_single_quote_subst"`'
-finish_cmds='`$ECHO "$finish_cmds" | $SED "$delay_single_quote_subst"`'
-finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`'
-hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`'
-sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`'
-sys_lib_dlsearch_path_spec='`$ECHO "$sys_lib_dlsearch_path_spec" | $SED "$delay_single_quote_subst"`'
-hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`'
-enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`'
-enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`'
-enable_dlopen_self_static='`$ECHO "$enable_dlopen_self_static" | $SED "$delay_single_quote_subst"`'
-old_striplib='`$ECHO "$old_striplib" | $SED "$delay_single_quote_subst"`'
-striplib='`$ECHO "$striplib" | $SED "$delay_single_quote_subst"`'
-
-LTCC='$LTCC'
-LTCFLAGS='$LTCFLAGS'
-compiler='$compiler_DEFAULT'
-
-# A function that is used when there is no print builtin or printf.
-func_fallback_echo ()
-{
-  eval 'cat <<_LTECHO_EOF
-\$1
-_LTECHO_EOF'
-}
-
-# Quote evaled strings.
-for var in SHELL \
-ECHO \
-PATH_SEPARATOR \
-SED \
-GREP \
-EGREP \
-FGREP \
-LD \
-NM \
-LN_S \
-lt_SP2NL \
-lt_NL2SP \
-reload_flag \
-OBJDUMP \
-deplibs_check_method \
-file_magic_cmd \
-file_magic_glob \
-want_nocaseglob \
-DLLTOOL \
-sharedlib_from_linklib_cmd \
-AR \
-AR_FLAGS \
-archiver_list_spec \
-STRIP \
-RANLIB \
-CC \
-CFLAGS \
-compiler \
-lt_cv_sys_global_symbol_pipe \
-lt_cv_sys_global_symbol_to_cdecl \
-lt_cv_sys_global_symbol_to_c_name_address \
-lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \
-nm_file_list_spec \
-lt_prog_compiler_no_builtin_flag \
-lt_prog_compiler_pic \
-lt_prog_compiler_wl \
-lt_prog_compiler_static \
-lt_cv_prog_compiler_c_o \
-need_locks \
-MANIFEST_TOOL \
-DSYMUTIL \
-NMEDIT \
-LIPO \
-OTOOL \
-OTOOL64 \
-shrext_cmds \
-export_dynamic_flag_spec \
-whole_archive_flag_spec \
-compiler_needs_object \
-with_gnu_ld \
-allow_undefined_flag \
-no_undefined_flag \
-hardcode_libdir_flag_spec \
-hardcode_libdir_separator \
-exclude_expsyms \
-include_expsyms \
-file_list_spec \
-variables_saved_for_relink \
-libname_spec \
-library_names_spec \
-soname_spec \
-install_override_mode \
-finish_eval \
-old_striplib \
-striplib; do
-    case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
-    *[\\\\\\\`\\"\\\$]*)
-      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
-      ;;
-    *)
-      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
-      ;;
-    esac
-done
-
-# Double-quote double-evaled strings.
-for var in reload_cmds \
-old_postinstall_cmds \
-old_postuninstall_cmds \
-old_archive_cmds \
-extract_expsyms_cmds \
-old_archive_from_new_cmds \
-old_archive_from_expsyms_cmds \
-archive_cmds \
-archive_expsym_cmds \
-module_cmds \
-module_expsym_cmds \
-export_symbols_cmds \
-prelink_cmds \
-postlink_cmds \
-postinstall_cmds \
-postuninstall_cmds \
-finish_cmds \
-sys_lib_search_path_spec \
-sys_lib_dlsearch_path_spec; do
-    case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
-    *[\\\\\\\`\\"\\\$]*)
-      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
-      ;;
-    *)
-      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
-      ;;
-    esac
-done
-
-ac_aux_dir='$ac_aux_dir'
-xsi_shell='$xsi_shell'
-lt_shell_append='$lt_shell_append'
-
-# See if we are running on zsh, and set the options which allow our
-# commands through without removal of \ escapes INIT.
-if test -n "\${ZSH_VERSION+set}" ; then
-   setopt NO_GLOB_SUBST
-fi
-
-
-    PACKAGE='$PACKAGE'
-    VERSION='$VERSION'
-    TIMESTAMP='$TIMESTAMP'
-    RM='$RM'
-    ofile='$ofile'
-
-
-
-atfdir=`pwd`/unit/atf
-
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-
-# Handling of arguments.
-for ac_config_target in $ac_config_targets
-do
-  case $ac_config_target in
-    "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
-    "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;;
-    "make/rules") CONFIG_FILES="$CONFIG_FILES make/rules" ;;
-    "make/includes") CONFIG_FILES="$CONFIG_FILES make/includes" ;;
-    "atf-config") CONFIG_COMMANDS="$CONFIG_COMMANDS atf-config" ;;
-    "contrib/dlz/bin/dlzbdb/Makefile") CONFIG_FILES="$CONFIG_FILES contrib/dlz/bin/dlzbdb/Makefile" ;;
-    "$DLZ_DRIVER_RULES") CONFIG_FILES="$CONFIG_FILES $DLZ_DRIVER_RULES" ;;
-    "chmod") CONFIG_COMMANDS="$CONFIG_COMMANDS chmod" ;;
-    "make/Makefile") CONFIG_FILES="$CONFIG_FILES make/Makefile" ;;
-    "make/mkdep") CONFIG_FILES="$CONFIG_FILES make/mkdep" ;;
-    "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
-    "bin/Makefile") CONFIG_FILES="$CONFIG_FILES bin/Makefile" ;;
-    "bin/check/Makefile") CONFIG_FILES="$CONFIG_FILES bin/check/Makefile" ;;
-    "bin/confgen/Makefile") CONFIG_FILES="$CONFIG_FILES bin/confgen/Makefile" ;;
-    "bin/confgen/unix/Makefile") CONFIG_FILES="$CONFIG_FILES bin/confgen/unix/Makefile" ;;
-    "bin/dig/Makefile") CONFIG_FILES="$CONFIG_FILES bin/dig/Makefile" ;;
-    "bin/dnssec/Makefile") CONFIG_FILES="$CONFIG_FILES bin/dnssec/Makefile" ;;
-    "bin/named/Makefile") CONFIG_FILES="$CONFIG_FILES bin/named/Makefile" ;;
-    "bin/named/unix/Makefile") CONFIG_FILES="$CONFIG_FILES bin/named/unix/Makefile" ;;
-    "bin/nsupdate/Makefile") CONFIG_FILES="$CONFIG_FILES bin/nsupdate/Makefile" ;;
-    "bin/pkcs11/Makefile") CONFIG_FILES="$CONFIG_FILES bin/pkcs11/Makefile" ;;
-    "bin/rndc/Makefile") CONFIG_FILES="$CONFIG_FILES bin/rndc/Makefile" ;;
-    "bin/tests/Makefile") CONFIG_FILES="$CONFIG_FILES bin/tests/Makefile" ;;
-    "bin/tests/atomic/Makefile") CONFIG_FILES="$CONFIG_FILES bin/tests/atomic/Makefile" ;;
-    "bin/tests/db/Makefile") CONFIG_FILES="$CONFIG_FILES bin/tests/db/Makefile" ;;
-    "bin/tests/dst/Makefile") CONFIG_FILES="$CONFIG_FILES bin/tests/dst/Makefile" ;;
-    "bin/tests/dst/Kdh.+002+18602.key") CONFIG_FILES="$CONFIG_FILES bin/tests/dst/Kdh.+002+18602.key" ;;
-    "bin/tests/dst/Kdh.+002+18602.private") CONFIG_FILES="$CONFIG_FILES bin/tests/dst/Kdh.+002+18602.private" ;;
-    "bin/tests/dst/Kdh.+002+48957.key") CONFIG_FILES="$CONFIG_FILES bin/tests/dst/Kdh.+002+48957.key" ;;
-    "bin/tests/dst/Kdh.+002+48957.private") CONFIG_FILES="$CONFIG_FILES bin/tests/dst/Kdh.+002+48957.private" ;;
-    "bin/tests/dst/Ktest.+001+00002.key") CONFIG_FILES="$CONFIG_FILES bin/tests/dst/Ktest.+001+00002.key" ;;
-    "bin/tests/dst/Ktest.+001+54622.key") CONFIG_FILES="$CONFIG_FILES bin/tests/dst/Ktest.+001+54622.key" ;;
-    "bin/tests/dst/Ktest.+001+54622.private") CONFIG_FILES="$CONFIG_FILES bin/tests/dst/Ktest.+001+54622.private" ;;
-    "bin/tests/dst/Ktest.+003+23616.key") CONFIG_FILES="$CONFIG_FILES bin/tests/dst/Ktest.+003+23616.key" ;;
-    "bin/tests/dst/Ktest.+003+23616.private") CONFIG_FILES="$CONFIG_FILES bin/tests/dst/Ktest.+003+23616.private" ;;
-    "bin/tests/dst/Ktest.+003+49667.key") CONFIG_FILES="$CONFIG_FILES bin/tests/dst/Ktest.+003+49667.key" ;;
-    "bin/tests/dst/dst_2_data") CONFIG_FILES="$CONFIG_FILES bin/tests/dst/dst_2_data" ;;
-    "bin/tests/dst/t2_data_1") CONFIG_FILES="$CONFIG_FILES bin/tests/dst/t2_data_1" ;;
-    "bin/tests/dst/t2_data_2") CONFIG_FILES="$CONFIG_FILES bin/tests/dst/t2_data_2" ;;
-    "bin/tests/dst/t2_dsasig") CONFIG_FILES="$CONFIG_FILES bin/tests/dst/t2_dsasig" ;;
-    "bin/tests/dst/t2_rsasig") CONFIG_FILES="$CONFIG_FILES bin/tests/dst/t2_rsasig" ;;
-    "bin/tests/hashes/Makefile") CONFIG_FILES="$CONFIG_FILES bin/tests/hashes/Makefile" ;;
-    "bin/tests/headerdep_test.sh") CONFIG_FILES="$CONFIG_FILES bin/tests/headerdep_test.sh" ;;
-    "bin/tests/master/Makefile") CONFIG_FILES="$CONFIG_FILES bin/tests/master/Makefile" ;;
-    "bin/tests/mem/Makefile") CONFIG_FILES="$CONFIG_FILES bin/tests/mem/Makefile" ;;
-    "bin/tests/names/Makefile") CONFIG_FILES="$CONFIG_FILES bin/tests/names/Makefile" ;;
-    "bin/tests/net/Makefile") CONFIG_FILES="$CONFIG_FILES bin/tests/net/Makefile" ;;
-    "bin/tests/rbt/Makefile") CONFIG_FILES="$CONFIG_FILES bin/tests/rbt/Makefile" ;;
-    "bin/tests/resolver/Makefile") CONFIG_FILES="$CONFIG_FILES bin/tests/resolver/Makefile" ;;
-    "bin/tests/sockaddr/Makefile") CONFIG_FILES="$CONFIG_FILES bin/tests/sockaddr/Makefile" ;;
-    "bin/tests/system/Makefile") CONFIG_FILES="$CONFIG_FILES bin/tests/system/Makefile" ;;
-    "bin/tests/system/conf.sh") CONFIG_FILES="$CONFIG_FILES bin/tests/system/conf.sh" ;;
-    "bin/tests/system/dlz/prereq.sh") CONFIG_FILES="$CONFIG_FILES bin/tests/system/dlz/prereq.sh" ;;
-    "bin/tests/system/dlzexternal/Makefile") CONFIG_FILES="$CONFIG_FILES bin/tests/system/dlzexternal/Makefile" ;;
-    "bin/tests/system/dlzexternal/ns1/named.conf") CONFIG_FILES="$CONFIG_FILES bin/tests/system/dlzexternal/ns1/named.conf" ;;
-    "bin/tests/system/ecdsa/prereq.sh") CONFIG_FILES="$CONFIG_FILES bin/tests/system/ecdsa/prereq.sh" ;;
-    "bin/tests/system/filter-aaaa/Makefile") CONFIG_FILES="$CONFIG_FILES bin/tests/system/filter-aaaa/Makefile" ;;
-    "bin/tests/system/gost/prereq.sh") CONFIG_FILES="$CONFIG_FILES bin/tests/system/gost/prereq.sh" ;;
-    "bin/tests/system/lwresd/Makefile") CONFIG_FILES="$CONFIG_FILES bin/tests/system/lwresd/Makefile" ;;
-    "bin/tests/system/rpz/Makefile") CONFIG_FILES="$CONFIG_FILES bin/tests/system/rpz/Makefile" ;;
-    "bin/tests/system/tkey/Makefile") CONFIG_FILES="$CONFIG_FILES bin/tests/system/tkey/Makefile" ;;
-    "bin/tests/system/tsiggss/Makefile") CONFIG_FILES="$CONFIG_FILES bin/tests/system/tsiggss/Makefile" ;;
-    "bin/tests/tasks/Makefile") CONFIG_FILES="$CONFIG_FILES bin/tests/tasks/Makefile" ;;
-    "bin/tests/timers/Makefile") CONFIG_FILES="$CONFIG_FILES bin/tests/timers/Makefile" ;;
-    "bin/tests/virtual-time/Makefile") CONFIG_FILES="$CONFIG_FILES bin/tests/virtual-time/Makefile" ;;
-    "bin/tests/virtual-time/conf.sh") CONFIG_FILES="$CONFIG_FILES bin/tests/virtual-time/conf.sh" ;;
-    "bin/tools/Makefile") CONFIG_FILES="$CONFIG_FILES bin/tools/Makefile" ;;
-    "contrib/check-secure-delegation.pl") CONFIG_FILES="$CONFIG_FILES contrib/check-secure-delegation.pl" ;;
-    "contrib/zone-edit.sh") CONFIG_FILES="$CONFIG_FILES contrib/zone-edit.sh" ;;
-    "doc/Makefile") CONFIG_FILES="$CONFIG_FILES doc/Makefile" ;;
-    "doc/arm/Makefile") CONFIG_FILES="$CONFIG_FILES doc/arm/Makefile" ;;
-    "doc/doxygen/Doxyfile") CONFIG_FILES="$CONFIG_FILES doc/doxygen/Doxyfile" ;;
-    "doc/doxygen/Makefile") CONFIG_FILES="$CONFIG_FILES doc/doxygen/Makefile" ;;
-    "doc/doxygen/doxygen-input-filter") CONFIG_FILES="$CONFIG_FILES doc/doxygen/doxygen-input-filter" ;;
-    "doc/misc/Makefile") CONFIG_FILES="$CONFIG_FILES doc/misc/Makefile" ;;
-    "doc/xsl/Makefile") CONFIG_FILES="$CONFIG_FILES doc/xsl/Makefile" ;;
-    "doc/xsl/isc-docbook-chunk.xsl") CONFIG_FILES="$CONFIG_FILES doc/xsl/isc-docbook-chunk.xsl" ;;
-    "doc/xsl/isc-docbook-html.xsl") CONFIG_FILES="$CONFIG_FILES doc/xsl/isc-docbook-html.xsl" ;;
-    "doc/xsl/isc-docbook-latex.xsl") CONFIG_FILES="$CONFIG_FILES doc/xsl/isc-docbook-latex.xsl" ;;
-    "doc/xsl/isc-manpage.xsl") CONFIG_FILES="$CONFIG_FILES doc/xsl/isc-manpage.xsl" ;;
-    "isc-config.sh") CONFIG_FILES="$CONFIG_FILES isc-config.sh" ;;
-    "lib/Makefile") CONFIG_FILES="$CONFIG_FILES lib/Makefile" ;;
-    "lib/bind9/Makefile") CONFIG_FILES="$CONFIG_FILES lib/bind9/Makefile" ;;
-    "lib/bind9/include/Makefile") CONFIG_FILES="$CONFIG_FILES lib/bind9/include/Makefile" ;;
-    "lib/bind9/include/bind9/Makefile") CONFIG_FILES="$CONFIG_FILES lib/bind9/include/bind9/Makefile" ;;
-    "lib/dns/Makefile") CONFIG_FILES="$CONFIG_FILES lib/dns/Makefile" ;;
-    "lib/dns/include/Makefile") CONFIG_FILES="$CONFIG_FILES lib/dns/include/Makefile" ;;
-    "lib/dns/include/dns/Makefile") CONFIG_FILES="$CONFIG_FILES lib/dns/include/dns/Makefile" ;;
-    "lib/dns/include/dst/Makefile") CONFIG_FILES="$CONFIG_FILES lib/dns/include/dst/Makefile" ;;
-    "lib/dns/tests/Makefile") CONFIG_FILES="$CONFIG_FILES lib/dns/tests/Makefile" ;;
-    "lib/export/Makefile") CONFIG_FILES="$CONFIG_FILES lib/export/Makefile" ;;
-    "lib/export/dns/Makefile") CONFIG_FILES="$CONFIG_FILES lib/export/dns/Makefile" ;;
-    "lib/export/dns/include/Makefile") CONFIG_FILES="$CONFIG_FILES lib/export/dns/include/Makefile" ;;
-    "lib/export/dns/include/dns/Makefile") CONFIG_FILES="$CONFIG_FILES lib/export/dns/include/dns/Makefile" ;;
-    "lib/export/dns/include/dst/Makefile") CONFIG_FILES="$CONFIG_FILES lib/export/dns/include/dst/Makefile" ;;
-    "lib/export/irs/Makefile") CONFIG_FILES="$CONFIG_FILES lib/export/irs/Makefile" ;;
-    "lib/export/irs/include/Makefile") CONFIG_FILES="$CONFIG_FILES lib/export/irs/include/Makefile" ;;
-    "lib/export/irs/include/irs/Makefile") CONFIG_FILES="$CONFIG_FILES lib/export/irs/include/irs/Makefile" ;;
-    "lib/export/isc/$thread_dir/Makefile") CONFIG_FILES="$CONFIG_FILES lib/export/isc/$thread_dir/Makefile" ;;
-    "lib/export/isc/$thread_dir/include/Makefile") CONFIG_FILES="$CONFIG_FILES lib/export/isc/$thread_dir/include/Makefile" ;;
-    "lib/export/isc/$thread_dir/include/isc/Makefile") CONFIG_FILES="$CONFIG_FILES lib/export/isc/$thread_dir/include/isc/Makefile" ;;
-    "lib/export/isc/Makefile") CONFIG_FILES="$CONFIG_FILES lib/export/isc/Makefile" ;;
-    "lib/export/isc/include/Makefile") CONFIG_FILES="$CONFIG_FILES lib/export/isc/include/Makefile" ;;
-    "lib/export/isc/include/isc/Makefile") CONFIG_FILES="$CONFIG_FILES lib/export/isc/include/isc/Makefile" ;;
-    "lib/export/isc/nls/Makefile") CONFIG_FILES="$CONFIG_FILES lib/export/isc/nls/Makefile" ;;
-    "lib/export/isc/unix/Makefile") CONFIG_FILES="$CONFIG_FILES lib/export/isc/unix/Makefile" ;;
-    "lib/export/isc/unix/include/Makefile") CONFIG_FILES="$CONFIG_FILES lib/export/isc/unix/include/Makefile" ;;
-    "lib/export/isc/unix/include/isc/Makefile") CONFIG_FILES="$CONFIG_FILES lib/export/isc/unix/include/isc/Makefile" ;;
-    "lib/export/isccfg/Makefile") CONFIG_FILES="$CONFIG_FILES lib/export/isccfg/Makefile" ;;
-    "lib/export/isccfg/include/Makefile") CONFIG_FILES="$CONFIG_FILES lib/export/isccfg/include/Makefile" ;;
-    "lib/export/isccfg/include/isccfg/Makefile") CONFIG_FILES="$CONFIG_FILES lib/export/isccfg/include/isccfg/Makefile" ;;
-    "lib/export/samples/Makefile") CONFIG_FILES="$CONFIG_FILES lib/export/samples/Makefile" ;;
-    "lib/export/samples/Makefile-postinstall") CONFIG_FILES="$CONFIG_FILES lib/export/samples/Makefile-postinstall" ;;
-    "lib/irs/Makefile") CONFIG_FILES="$CONFIG_FILES lib/irs/Makefile" ;;
-    "lib/irs/include/Makefile") CONFIG_FILES="$CONFIG_FILES lib/irs/include/Makefile" ;;
-    "lib/irs/include/irs/Makefile") CONFIG_FILES="$CONFIG_FILES lib/irs/include/irs/Makefile" ;;
-    "lib/irs/include/irs/netdb.h") CONFIG_FILES="$CONFIG_FILES lib/irs/include/irs/netdb.h" ;;
-    "lib/irs/include/irs/platform.h") CONFIG_FILES="$CONFIG_FILES lib/irs/include/irs/platform.h" ;;
-    "lib/isc/$arch/Makefile") CONFIG_FILES="$CONFIG_FILES lib/isc/$arch/Makefile" ;;
-    "lib/isc/$arch/include/Makefile") CONFIG_FILES="$CONFIG_FILES lib/isc/$arch/include/Makefile" ;;
-    "lib/isc/$arch/include/isc/Makefile") CONFIG_FILES="$CONFIG_FILES lib/isc/$arch/include/isc/Makefile" ;;
-    "lib/isc/$thread_dir/Makefile") CONFIG_FILES="$CONFIG_FILES lib/isc/$thread_dir/Makefile" ;;
-    "lib/isc/$thread_dir/include/Makefile") CONFIG_FILES="$CONFIG_FILES lib/isc/$thread_dir/include/Makefile" ;;
-    "lib/isc/$thread_dir/include/isc/Makefile") CONFIG_FILES="$CONFIG_FILES lib/isc/$thread_dir/include/isc/Makefile" ;;
-    "lib/isc/Makefile") CONFIG_FILES="$CONFIG_FILES lib/isc/Makefile" ;;
-    "lib/isc/include/Makefile") CONFIG_FILES="$CONFIG_FILES lib/isc/include/Makefile" ;;
-    "lib/isc/include/isc/Makefile") CONFIG_FILES="$CONFIG_FILES lib/isc/include/isc/Makefile" ;;
-    "lib/isc/include/isc/platform.h") CONFIG_FILES="$CONFIG_FILES lib/isc/include/isc/platform.h" ;;
-    "lib/isc/tests/Makefile") CONFIG_FILES="$CONFIG_FILES lib/isc/tests/Makefile" ;;
-    "lib/isc/nls/Makefile") CONFIG_FILES="$CONFIG_FILES lib/isc/nls/Makefile" ;;
-    "lib/isc/unix/Makefile") CONFIG_FILES="$CONFIG_FILES lib/isc/unix/Makefile" ;;
-    "lib/isc/unix/include/Makefile") CONFIG_FILES="$CONFIG_FILES lib/isc/unix/include/Makefile" ;;
-    "lib/isc/unix/include/isc/Makefile") CONFIG_FILES="$CONFIG_FILES lib/isc/unix/include/isc/Makefile" ;;
-    "lib/isccc/Makefile") CONFIG_FILES="$CONFIG_FILES lib/isccc/Makefile" ;;
-    "lib/isccc/include/Makefile") CONFIG_FILES="$CONFIG_FILES lib/isccc/include/Makefile" ;;
-    "lib/isccc/include/isccc/Makefile") CONFIG_FILES="$CONFIG_FILES lib/isccc/include/isccc/Makefile" ;;
-    "lib/isccfg/Makefile") CONFIG_FILES="$CONFIG_FILES lib/isccfg/Makefile" ;;
-    "lib/isccfg/include/Makefile") CONFIG_FILES="$CONFIG_FILES lib/isccfg/include/Makefile" ;;
-    "lib/isccfg/include/isccfg/Makefile") CONFIG_FILES="$CONFIG_FILES lib/isccfg/include/isccfg/Makefile" ;;
-    "lib/lwres/Makefile") CONFIG_FILES="$CONFIG_FILES lib/lwres/Makefile" ;;
-    "lib/lwres/include/Makefile") CONFIG_FILES="$CONFIG_FILES lib/lwres/include/Makefile" ;;
-    "lib/lwres/include/lwres/Makefile") CONFIG_FILES="$CONFIG_FILES lib/lwres/include/lwres/Makefile" ;;
-    "lib/lwres/include/lwres/netdb.h") CONFIG_FILES="$CONFIG_FILES lib/lwres/include/lwres/netdb.h" ;;
-    "lib/lwres/include/lwres/platform.h") CONFIG_FILES="$CONFIG_FILES lib/lwres/include/lwres/platform.h" ;;
-    "lib/lwres/man/Makefile") CONFIG_FILES="$CONFIG_FILES lib/lwres/man/Makefile" ;;
-    "lib/lwres/unix/Makefile") CONFIG_FILES="$CONFIG_FILES lib/lwres/unix/Makefile" ;;
-    "lib/lwres/unix/include/Makefile") CONFIG_FILES="$CONFIG_FILES lib/lwres/unix/include/Makefile" ;;
-    "lib/lwres/unix/include/lwres/Makefile") CONFIG_FILES="$CONFIG_FILES lib/lwres/unix/include/lwres/Makefile" ;;
-    "lib/tests/Makefile") CONFIG_FILES="$CONFIG_FILES lib/tests/Makefile" ;;
-    "lib/tests/include/Makefile") CONFIG_FILES="$CONFIG_FILES lib/tests/include/Makefile" ;;
-    "lib/tests/include/tests/Makefile") CONFIG_FILES="$CONFIG_FILES lib/tests/include/tests/Makefile" ;;
-    "unit/Makefile") CONFIG_FILES="$CONFIG_FILES unit/Makefile" ;;
-    "unit/unittest.sh") CONFIG_FILES="$CONFIG_FILES unit/unittest.sh" ;;
-
-  *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
-  esac
-done
-
-
-# If the user did not use the arguments to specify the items to instantiate,
-# then the envvar interface is used.  Set only those that are not.
-# We use the long form for the default assignment because of an extremely
-# bizarre bug on SunOS 4.1.3.
-if $ac_need_defaults; then
-  test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
-  test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
-  test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
-fi
-
-# Have a temporary directory for convenience.  Make it in the build tree
-# simply because there is no reason against having it here, and in addition,
-# creating and moving files from /tmp can sometimes cause problems.
-# Hook for its removal unless debugging.
-# Note that there is a small window in which the directory will not be cleaned:
-# after its creation but before its name has been assigned to `$tmp'.
-$debug ||
-{
-  tmp= ac_tmp=
-  trap 'exit_status=$?
-  : "${ac_tmp:=$tmp}"
-  { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status
-' 0
-  trap 'as_fn_exit 1' 1 2 13 15
-}
-# Create a (secure) tmp directory for tmp files.
-
-{
-  tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
-  test -d "$tmp"
-}  ||
-{
-  tmp=./conf$$-$RANDOM
-  (umask 077 && mkdir "$tmp")
-} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5
-ac_tmp=$tmp
-
-# Set up the scripts for CONFIG_FILES section.
-# No need to generate them if there are no CONFIG_FILES.
-# This happens for instance with `./config.status config.h'.
-if test -n "$CONFIG_FILES"; then
-
-if $AWK 'BEGIN { getline <"/dev/null" }' </dev/null 2>/dev/null; then
-  ac_cs_awk_getline=:
-  ac_cs_awk_pipe_init=
-  ac_cs_awk_read_file='
-      while ((getline aline < (F[key])) > 0)
-	print(aline)
-      close(F[key])'
-  ac_cs_awk_pipe_fini=
-else
-  ac_cs_awk_getline=false
-  ac_cs_awk_pipe_init="print \"cat <<'|#_!!_#|' &&\""
-  ac_cs_awk_read_file='
-      print "|#_!!_#|"
-      print "cat " F[key] " &&"
-      '$ac_cs_awk_pipe_init
-  # The final `:' finishes the AND list.
-  ac_cs_awk_pipe_fini='END { print "|#_!!_#|"; print ":" }'
-fi
-ac_cr=`echo X | tr X '\015'`
-# On cygwin, bash can eat \r inside `` if the user requested igncr.
-# But we know of no other shell where ac_cr would be empty at this
-# point, so we can use a bashism as a fallback.
-if test "x$ac_cr" = x; then
-  eval ac_cr=\$\'\\r\'
-fi
-ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
-if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
-  ac_cs_awk_cr='\\r'
-else
-  ac_cs_awk_cr=$ac_cr
-fi
-
-echo 'BEGIN {' >"$ac_tmp/subs1.awk" &&
-_ACEOF
-
-# Create commands to substitute file output variables.
-{
-  echo "cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1" &&
-  echo 'cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK &&' &&
-  echo "$ac_subst_files" | sed 's/.*/F["&"]="$&"/' &&
-  echo "_ACAWK" &&
-  echo "_ACEOF"
-} >conf$$files.sh &&
-. ./conf$$files.sh ||
-  as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
-rm -f conf$$files.sh
-
-{
-  echo "cat >conf$$subs.awk <<_ACEOF" &&
-  echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
-  echo "_ACEOF"
-} >conf$$subs.sh ||
-  as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
-ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'`
-ac_delim='%!_!# '
-for ac_last_try in false false false false false :; do
-  . ./conf$$subs.sh ||
-    as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
-
-  ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
-  if test $ac_delim_n = $ac_delim_num; then
-    break
-  elif $ac_last_try; then
-    as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
-  else
-    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
-  fi
-done
-rm -f conf$$subs.sh
-
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK &&
-_ACEOF
-sed -n '
-h
-s/^/S["/; s/!.*/"]=/
-p
-g
-s/^[^!]*!//
-:repl
-t repl
-s/'"$ac_delim"'$//
-t delim
-:nl
-h
-s/\(.\{148\}\)..*/\1/
-t more1
-s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
-p
-n
-b repl
-:more1
-s/["\\]/\\&/g; s/^/"/; s/$/"\\/
-p
-g
-s/.\{148\}//
-t nl
-:delim
-h
-s/\(.\{148\}\)..*/\1/
-t more2
-s/["\\]/\\&/g; s/^/"/; s/$/"/
-p
-b
-:more2
-s/["\\]/\\&/g; s/^/"/; s/$/"\\/
-p
-g
-s/.\{148\}//
-t delim
-' <conf$$subs.awk | sed '
-/^[^""]/{
-  N
-  s/\n//
-}
-' >>$CONFIG_STATUS || ac_write_fail=1
-rm -f conf$$subs.awk
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-_ACAWK
-cat >>"\$ac_tmp/subs1.awk" <<_ACAWK &&
-  for (key in S) S_is_set[key] = 1
-  FS = ""
-  \$ac_cs_awk_pipe_init
-}
-{
-  line = $ 0
-  nfields = split(line, field, "@")
-  substed = 0
-  len = length(field[1])
-  for (i = 2; i < nfields; i++) {
-    key = field[i]
-    keylen = length(key)
-    if (S_is_set[key]) {
-      value = S[key]
-      line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
-      len += length(value) + length(field[++i])
-      substed = 1
-    } else
-      len += 1 + keylen
-  }
-  if (nfields == 3 && !substed) {
-    key = field[2]
-    if (F[key] != "" && line ~ /^[	 ]*@.*@[	 ]*$/) {
-      \$ac_cs_awk_read_file
-      next
-    }
-  }
-  print line
-}
-\$ac_cs_awk_pipe_fini
-_ACAWK
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
-  sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
-else
-  cat
-fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \
-  || as_fn_error $? "could not setup config files machinery" "$LINENO" 5
-_ACEOF
-
-# VPATH may cause trouble with some makes, so we remove sole $(srcdir),
-# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and
-# trailing colons and then remove the whole line if VPATH becomes empty
-# (actually we leave an empty line to preserve line numbers).
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[	 ]*VPATH[	 ]*=[	 ]*/{
-h
-s///
-s/^/:/
-s/[	 ]*$/:/
-s/:\$(srcdir):/:/g
-s/:\${srcdir}:/:/g
-s/:@srcdir@:/:/g
-s/^:*//
-s/:*$//
-x
-s/\(=[	 ]*\).*/\1/
-G
-s/\n//
-s/^[^=]*=[	 ]*$//
-}'
-fi
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-fi # test -n "$CONFIG_FILES"
-
-# Set up the scripts for CONFIG_HEADERS section.
-# No need to generate them if there are no CONFIG_HEADERS.
-# This happens for instance with `./config.status Makefile'.
-if test -n "$CONFIG_HEADERS"; then
-cat >"$ac_tmp/defines.awk" <<\_ACAWK ||
-BEGIN {
-_ACEOF
-
-# Transform confdefs.h into an awk script `defines.awk', embedded as
-# here-document in config.status, that substitutes the proper values into
-# config.h.in to produce config.h.
-
-# Create a delimiter string that does not exist in confdefs.h, to ease
-# handling of long lines.
-ac_delim='%!_!# '
-for ac_last_try in false false :; do
-  ac_tt=`sed -n "/$ac_delim/p" confdefs.h`
-  if test -z "$ac_tt"; then
-    break
-  elif $ac_last_try; then
-    as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5
-  else
-    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
-  fi
-done
-
-# For the awk script, D is an array of macro values keyed by name,
-# likewise P contains macro parameters if any.  Preserve backslash
-# newline sequences.
-
-ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]*
-sed -n '
-s/.\{148\}/&'"$ac_delim"'/g
-t rset
-:rset
-s/^[	 ]*#[	 ]*define[	 ][	 ]*/ /
-t def
-d
-:def
-s/\\$//
-t bsnl
-s/["\\]/\\&/g
-s/^ \('"$ac_word_re"'\)\(([^()]*)\)[	 ]*\(.*\)/P["\1"]="\2"\
-D["\1"]=" \3"/p
-s/^ \('"$ac_word_re"'\)[	 ]*\(.*\)/D["\1"]=" \2"/p
-d
-:bsnl
-s/["\\]/\\&/g
-s/^ \('"$ac_word_re"'\)\(([^()]*)\)[	 ]*\(.*\)/P["\1"]="\2"\
-D["\1"]=" \3\\\\\\n"\\/p
-t cont
-s/^ \('"$ac_word_re"'\)[	 ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p
-t cont
-d
-:cont
-n
-s/.\{148\}/&'"$ac_delim"'/g
-t clear
-:clear
-s/\\$//
-t bsnlc
-s/["\\]/\\&/g; s/^/"/; s/$/"/p
-d
-:bsnlc
-s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p
-b cont
-' <confdefs.h | sed '
-s/'"$ac_delim"'/"\\\
-"/g' >>$CONFIG_STATUS || ac_write_fail=1
-
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-  for (key in D) D_is_set[key] = 1
-  FS = ""
-}
-/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ {
-  line = \$ 0
-  split(line, arg, " ")
-  if (arg[1] == "#") {
-    defundef = arg[2]
-    mac1 = arg[3]
-  } else {
-    defundef = substr(arg[1], 2)
-    mac1 = arg[2]
-  }
-  split(mac1, mac2, "(") #)
-  macro = mac2[1]
-  prefix = substr(line, 1, index(line, defundef) - 1)
-  if (D_is_set[macro]) {
-    # Preserve the white space surrounding the "#".
-    print prefix "define", macro P[macro] D[macro]
-    next
-  } else {
-    # Replace #undef with comments.  This is necessary, for example,
-    # in the case of _POSIX_SOURCE, which is predefined and required
-    # on some systems where configure will not decide to define it.
-    if (defundef == "undef") {
-      print "/*", prefix defundef, macro, "*/"
-      next
-    }
-  }
-}
-{ print }
-_ACAWK
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-  as_fn_error $? "could not setup config headers machinery" "$LINENO" 5
-fi # test -n "$CONFIG_HEADERS"
-
-
-eval set X "  :F $CONFIG_FILES  :H $CONFIG_HEADERS    :C $CONFIG_COMMANDS"
-shift
-for ac_tag
-do
-  case $ac_tag in
-  :[FHLC]) ac_mode=$ac_tag; continue;;
-  esac
-  case $ac_mode$ac_tag in
-  :[FHL]*:*);;
-  :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;;
-  :[FH]-) ac_tag=-:-;;
-  :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
-  esac
-  ac_save_IFS=$IFS
-  IFS=:
-  set x $ac_tag
-  IFS=$ac_save_IFS
-  shift
-  ac_file=$1
-  shift
-
-  case $ac_mode in
-  :L) ac_source=$1;;
-  :[FH])
-    ac_file_inputs=
-    for ac_f
-    do
-      case $ac_f in
-      -) ac_f="$ac_tmp/stdin";;
-      *) # Look for the file first in the build tree, then in the source tree
-	 # (if the path is not absolute).  The absolute path cannot be DOS-style,
-	 # because $ac_f cannot contain `:'.
-	 test -f "$ac_f" ||
-	   case $ac_f in
-	   [\\/$]*) false;;
-	   *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
-	   esac ||
-	   as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;;
-      esac
-      case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
-      as_fn_append ac_file_inputs " '$ac_f'"
-    done
-
-    # Let's still pretend it is `configure' which instantiates (i.e., don't
-    # use $as_me), people would be surprised to read:
-    #    /* config.h.  Generated by config.status.  */
-    configure_input='Generated from '`
-	  $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
-	`' by configure.'
-    if test x"$ac_file" != x-; then
-      configure_input="$ac_file.  $configure_input"
-      { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
-$as_echo "$as_me: creating $ac_file" >&6;}
-    fi
-    # Neutralize special characters interpreted by sed in replacement strings.
-    case $configure_input in #(
-    *\&* | *\|* | *\\* )
-       ac_sed_conf_input=`$as_echo "$configure_input" |
-       sed 's/[\\\\&|]/\\\\&/g'`;; #(
-    *) ac_sed_conf_input=$configure_input;;
-    esac
-
-    case $ac_tag in
-    *:-:* | *:-) cat >"$ac_tmp/stdin" \
-      || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;
-    esac
-    ;;
-  esac
-
-  ac_dir=`$as_dirname -- "$ac_file" ||
-$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$ac_file" : 'X\(//\)[^/]' \| \
-	 X"$ac_file" : 'X\(//\)$' \| \
-	 X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$ac_file" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\/\)[^/].*/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\/\)$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\).*/{
-	    s//\1/
-	    q
-	  }
-	  s/.*/./; q'`
-  as_dir="$ac_dir"; as_fn_mkdir_p
-  ac_builddir=.
-
-case "$ac_dir" in
-.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
-*)
-  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
-  # A ".." for each directory in $ac_dir_suffix.
-  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
-  case $ac_top_builddir_sub in
-  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
-  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
-  esac ;;
-esac
-ac_abs_top_builddir=$ac_pwd
-ac_abs_builddir=$ac_pwd$ac_dir_suffix
-# for backward compatibility:
-ac_top_builddir=$ac_top_build_prefix
-
-case $srcdir in
-  .)  # We are building in place.
-    ac_srcdir=.
-    ac_top_srcdir=$ac_top_builddir_sub
-    ac_abs_top_srcdir=$ac_pwd ;;
-  [\\/]* | ?:[\\/]* )  # Absolute name.
-    ac_srcdir=$srcdir$ac_dir_suffix;
-    ac_top_srcdir=$srcdir
-    ac_abs_top_srcdir=$srcdir ;;
-  *) # Relative name.
-    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
-    ac_top_srcdir=$ac_top_build_prefix$srcdir
-    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
-esac
-ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
-
-
-  case $ac_mode in
-  :F)
-  #
-  # CONFIG_FILE
-  #
-
-  case $INSTALL in
-  [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
-  *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
-  esac
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-# If the template does not know about datarootdir, expand it.
-# FIXME: This hack should be removed a few years after 2.60.
-ac_datarootdir_hack=; ac_datarootdir_seen=
-ac_sed_dataroot='
-/datarootdir/ {
-  p
-  q
-}
-/@datadir@/p
-/@docdir@/p
-/@infodir@/p
-/@localedir@/p
-/@mandir@/p'
-case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
-*datarootdir*) ac_datarootdir_seen=yes;;
-*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
-  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
-$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-  ac_datarootdir_hack='
-  s&@datadir@&$datadir&g
-  s&@docdir@&$docdir&g
-  s&@infodir@&$infodir&g
-  s&@localedir@&$localedir&g
-  s&@mandir@&$mandir&g
-  s&\\\${datarootdir}&$datarootdir&g' ;;
-esac
-_ACEOF
-
-# Neutralize VPATH when `$srcdir' = `.'.
-# Shell code in configure.ac might set extrasub.
-# FIXME: do we really want to maintain this feature?
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-ac_sed_extra="$ac_vpsub
-$extrasub
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-:t
-/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-s|@configure_input@|$ac_sed_conf_input|;t t
-s&@top_builddir@&$ac_top_builddir_sub&;t t
-s&@top_build_prefix@&$ac_top_build_prefix&;t t
-s&@srcdir@&$ac_srcdir&;t t
-s&@abs_srcdir@&$ac_abs_srcdir&;t t
-s&@top_srcdir@&$ac_top_srcdir&;t t
-s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
-s&@builddir@&$ac_builddir&;t t
-s&@abs_builddir@&$ac_abs_builddir&;t t
-s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
-s&@INSTALL@&$ac_INSTALL&;t t
-$ac_datarootdir_hack
-"
-eval sed \"\$ac_sed_extra\" "$ac_file_inputs" |
-if $ac_cs_awk_getline; then
-  $AWK -f "$ac_tmp/subs.awk"
-else
-  $AWK -f "$ac_tmp/subs.awk" | $SHELL
-fi \
-  >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5
-
-test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
-  { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
-  { ac_out=`sed -n '/^[	 ]*datarootdir[	 ]*:*=/p' \
-      "$ac_tmp/out"`; test -z "$ac_out"; } &&
-  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-which seems to be undefined.  Please make sure it is defined" >&5
-$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-which seems to be undefined.  Please make sure it is defined" >&2;}
-
-  rm -f "$ac_tmp/stdin"
-  case $ac_file in
-  -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";;
-  *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";;
-  esac \
-  || as_fn_error $? "could not create $ac_file" "$LINENO" 5
- ;;
-  :H)
-  #
-  # CONFIG_HEADER
-  #
-  if test x"$ac_file" != x-; then
-    {
-      $as_echo "/* $configure_input  */" \
-      && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs"
-    } >"$ac_tmp/config.h" \
-      || as_fn_error $? "could not create $ac_file" "$LINENO" 5
-    if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then
-      { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5
-$as_echo "$as_me: $ac_file is unchanged" >&6;}
-    else
-      rm -f "$ac_file"
-      mv "$ac_tmp/config.h" "$ac_file" \
-	|| as_fn_error $? "could not create $ac_file" "$LINENO" 5
-    fi
-  else
-    $as_echo "/* $configure_input  */" \
-      && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \
-      || as_fn_error $? "could not create -" "$LINENO" 5
-  fi
- ;;
-
-  :C)  { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5
-$as_echo "$as_me: executing $ac_file commands" >&6;}
- ;;
-  esac
-
-
-  case $ac_file$ac_mode in
-    "libtool":C)
-
-    # See if we are running on zsh, and set the options which allow our
-    # commands through without removal of \ escapes.
-    if test -n "${ZSH_VERSION+set}" ; then
-      setopt NO_GLOB_SUBST
-    fi
-
-    cfgfile="${ofile}T"
-    trap "$RM \"$cfgfile\"; exit 1" 1 2 15
-    $RM "$cfgfile"
-
-    cat <<_LT_EOF >> "$cfgfile"
-#! $SHELL
-
-# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
-# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-# NOTE: Changes made to this file will be lost: look at ltmain.sh.
-#
-#   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
-#                 2006, 2007, 2008, 2009, 2010, 2011 Free Software
-#                 Foundation, Inc.
-#   Written by Gordon Matzigkeit, 1996
-#
-#   This file is part of GNU Libtool.
-#
-# GNU Libtool is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# As a special exception to the GNU General Public License,
-# if you distribute this file as part of a program or library that
-# is built using GNU Libtool, you may include this file under the
-# same distribution terms that you use for the rest of that program.
-#
-# GNU Libtool is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with GNU Libtool; see the file COPYING.  If not, a copy
-# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
-# obtained by writing to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-
-
-# The names of the tagged configurations supported by this script.
-available_tags=""
-
-# ### BEGIN LIBTOOL CONFIG
-
-# Which release of libtool.m4 was used?
-macro_version=$macro_version
-macro_revision=$macro_revision
-
-# Whether or not to build shared libraries.
-build_libtool_libs=$enable_shared
-
-# Whether or not to build static libraries.
-build_old_libs=$enable_static
-
-# What type of objects to build.
-pic_mode=$pic_mode
-
-# Whether or not to optimize for fast installation.
-fast_install=$enable_fast_install
-
-# Shell to use when invoking shell scripts.
-SHELL=$lt_SHELL
-
-# An echo program that protects backslashes.
-ECHO=$lt_ECHO
-
-# The PATH separator for the build system.
-PATH_SEPARATOR=$lt_PATH_SEPARATOR
-
-# The host system.
-host_alias=$host_alias
-host=$host
-host_os=$host_os
-
-# The build system.
-build_alias=$build_alias
-build=$build
-build_os=$build_os
-
-# A sed program that does not truncate output.
-SED=$lt_SED
-
-# Sed that helps us avoid accidentally triggering echo(1) options like -n.
-Xsed="\$SED -e 1s/^X//"
-
-# A grep program that handles long lines.
-GREP=$lt_GREP
-
-# An ERE matcher.
-EGREP=$lt_EGREP
-
-# A literal string matcher.
-FGREP=$lt_FGREP
-
-# A BSD- or MS-compatible name lister.
-NM=$lt_NM
-
-# Whether we need soft or hard links.
-LN_S=$lt_LN_S
-
-# What is the maximum length of a command?
-max_cmd_len=$max_cmd_len
-
-# Object file suffix (normally "o").
-objext=$ac_objext
-
-# Executable file suffix (normally "").
-exeext=$exeext
-
-# whether the shell understands "unset".
-lt_unset=$lt_unset
-
-# turn spaces into newlines.
-SP2NL=$lt_lt_SP2NL
-
-# turn newlines into spaces.
-NL2SP=$lt_lt_NL2SP
-
-# convert \$build file names to \$host format.
-to_host_file_cmd=$lt_cv_to_host_file_cmd
-
-# convert \$build files to toolchain format.
-to_tool_file_cmd=$lt_cv_to_tool_file_cmd
-
-# An object symbol dumper.
-OBJDUMP=$lt_OBJDUMP
-
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method=$lt_deplibs_check_method
-
-# Command to use when deplibs_check_method = "file_magic".
-file_magic_cmd=$lt_file_magic_cmd
-
-# How to find potential files when deplibs_check_method = "file_magic".
-file_magic_glob=$lt_file_magic_glob
-
-# Find potential files using nocaseglob when deplibs_check_method = "file_magic".
-want_nocaseglob=$lt_want_nocaseglob
-
-# DLL creation program.
-DLLTOOL=$lt_DLLTOOL
-
-# Command to associate shared and link libraries.
-sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd
-
-# The archiver.
-AR=$lt_AR
-
-# Flags to create an archive.
-AR_FLAGS=$lt_AR_FLAGS
-
-# How to feed a file listing to the archiver.
-archiver_list_spec=$lt_archiver_list_spec
-
-# A symbol stripping program.
-STRIP=$lt_STRIP
-
-# Commands used to install an old-style archive.
-RANLIB=$lt_RANLIB
-old_postinstall_cmds=$lt_old_postinstall_cmds
-old_postuninstall_cmds=$lt_old_postuninstall_cmds
-
-# Whether to use a lock for old archive extraction.
-lock_old_archive_extraction=$lock_old_archive_extraction
-
-# A C compiler.
-LTCC=$lt_CC
-
-# LTCC compiler flags.
-LTCFLAGS=$lt_CFLAGS
-
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-
-# Transform the output of nm in a proper C declaration.
-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-
-# Transform the output of nm in a C name address pair.
-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-
-# Transform the output of nm in a C name address pair when lib prefix is needed.
-global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix
-
-# Specify filename containing input files for \$NM.
-nm_file_list_spec=$lt_nm_file_list_spec
-
-# The root where to search for dependent libraries,and in which our libraries should be installed.
-lt_sysroot=$lt_sysroot
-
-# The name of the directory that contains temporary libtool files.
-objdir=$objdir
-
-# Used to examine libraries when file_magic_cmd begins with "file".
-MAGIC_CMD=$MAGIC_CMD
-
-# Must we lock files when doing compilation?
-need_locks=$lt_need_locks
-
-# Manifest tool.
-MANIFEST_TOOL=$lt_MANIFEST_TOOL
-
-# Tool to manipulate archived DWARF debug symbol files on Mac OS X.
-DSYMUTIL=$lt_DSYMUTIL
-
-# Tool to change global to local symbols on Mac OS X.
-NMEDIT=$lt_NMEDIT
-
-# Tool to manipulate fat objects and archives on Mac OS X.
-LIPO=$lt_LIPO
-
-# ldd/readelf like tool for Mach-O binaries on Mac OS X.
-OTOOL=$lt_OTOOL
-
-# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4.
-OTOOL64=$lt_OTOOL64
-
-# Old archive suffix (normally "a").
-libext=$libext
-
-# Shared library suffix (normally ".so").
-shrext_cmds=$lt_shrext_cmds
-
-# The commands to extract the exported symbol list from a shared archive.
-extract_expsyms_cmds=$lt_extract_expsyms_cmds
-
-# Variables whose values should be saved in libtool wrapper scripts and
-# restored at link time.
-variables_saved_for_relink=$lt_variables_saved_for_relink
-
-# Do we need the "lib" prefix for modules?
-need_lib_prefix=$need_lib_prefix
-
-# Do we need a version for libraries?
-need_version=$need_version
-
-# Library versioning type.
-version_type=$version_type
-
-# Shared library runtime path variable.
-runpath_var=$runpath_var
-
-# Shared library path variable.
-shlibpath_var=$shlibpath_var
-
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-
-# Format of library name prefix.
-libname_spec=$lt_libname_spec
-
-# List of archive names.  First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME
-library_names_spec=$lt_library_names_spec
-
-# The coded name of the library, if different from the real name.
-soname_spec=$lt_soname_spec
-
-# Permission mode override for installation of shared libraries.
-install_override_mode=$lt_install_override_mode
-
-# Command to use after installation of a shared archive.
-postinstall_cmds=$lt_postinstall_cmds
-
-# Command to use after uninstallation of a shared archive.
-postuninstall_cmds=$lt_postuninstall_cmds
-
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds=$lt_finish_cmds
-
-# As "finish_cmds", except a single script fragment to be evaled but
-# not shown.
-finish_eval=$lt_finish_eval
-
-# Whether we should hardcode library paths into libraries.
-hardcode_into_libs=$hardcode_into_libs
-
-# Compile-time system search path for libraries.
-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-
-# Run-time system search path for libraries.
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-
-# Whether dlopen is supported.
-dlopen_support=$enable_dlopen
-
-# Whether dlopen of programs is supported.
-dlopen_self=$enable_dlopen_self
-
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=$enable_dlopen_self_static
-
-# Commands to strip libraries.
-old_striplib=$lt_old_striplib
-striplib=$lt_striplib
-
-
-# The linker used to build libraries.
-LD=$lt_LD
-
-# How to create reloadable object files.
-reload_flag=$lt_reload_flag
-reload_cmds=$lt_reload_cmds
-
-# Commands used to build an old-style archive.
-old_archive_cmds=$lt_old_archive_cmds
-
-# A language specific compiler.
-CC=$lt_compiler
-
-# Is the compiler the GNU compiler?
-with_gcc=$GCC
-
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag
-
-# Additional compiler flags for building library objects.
-pic_flag=$lt_lt_prog_compiler_pic
-
-# How to pass a linker flag through the compiler.
-wl=$lt_lt_prog_compiler_wl
-
-# Compiler flag to prevent dynamic linking.
-link_static_flag=$lt_lt_prog_compiler_static
-
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o=$lt_lt_cv_prog_compiler_c_o
-
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=$archive_cmds_need_lc
-
-# Whether or not to disallow shared libs when runtime libs are static.
-allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes
-
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec=$lt_export_dynamic_flag_spec
-
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec=$lt_whole_archive_flag_spec
-
-# Whether the compiler copes with passing no objects directly.
-compiler_needs_object=$lt_compiler_needs_object
-
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=$lt_old_archive_from_new_cmds
-
-# Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds
-
-# Commands used to build a shared archive.
-archive_cmds=$lt_archive_cmds
-archive_expsym_cmds=$lt_archive_expsym_cmds
-
-# Commands used to build a loadable module if different from building
-# a shared archive.
-module_cmds=$lt_module_cmds
-module_expsym_cmds=$lt_module_expsym_cmds
-
-# Whether we are building with GNU ld or not.
-with_gnu_ld=$lt_with_gnu_ld
-
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=$lt_allow_undefined_flag
-
-# Flag that enforces no undefined symbols.
-no_undefined_flag=$lt_no_undefined_flag
-
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist
-hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
-
-# Whether we need a single "-rpath" flag with a separated argument.
-hardcode_libdir_separator=$lt_hardcode_libdir_separator
-
-# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
-# DIR into the resulting binary.
-hardcode_direct=$hardcode_direct
-
-# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
-# DIR into the resulting binary and the resulting library dependency is
-# "absolute",i.e impossible to change by setting \${shlibpath_var} if the
-# library is relocated.
-hardcode_direct_absolute=$hardcode_direct_absolute
-
-# Set to "yes" if using the -LDIR flag during linking hardcodes DIR
-# into the resulting binary.
-hardcode_minus_L=$hardcode_minus_L
-
-# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
-# into the resulting binary.
-hardcode_shlibpath_var=$hardcode_shlibpath_var
-
-# Set to "yes" if building a shared library automatically hardcodes DIR
-# into the library and all subsequent libraries and executables linked
-# against it.
-hardcode_automatic=$hardcode_automatic
-
-# Set to yes if linker adds runtime paths of dependent libraries
-# to runtime path list.
-inherit_rpath=$inherit_rpath
-
-# Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=$link_all_deplibs
-
-# Set to "yes" if exported symbols are required.
-always_export_symbols=$always_export_symbols
-
-# The commands to list exported symbols.
-export_symbols_cmds=$lt_export_symbols_cmds
-
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms=$lt_exclude_expsyms
-
-# Symbols that must always be exported.
-include_expsyms=$lt_include_expsyms
-
-# Commands necessary for linking programs (against libraries) with templates.
-prelink_cmds=$lt_prelink_cmds
-
-# Commands necessary for finishing linking programs.
-postlink_cmds=$lt_postlink_cmds
-
-# Specify filename containing input files.
-file_list_spec=$lt_file_list_spec
-
-# How to hardcode a shared library path into an executable.
-hardcode_action=$hardcode_action
-
-# ### END LIBTOOL CONFIG
-
-_LT_EOF
-
-  case $host_os in
-  aix3*)
-    cat <<\_LT_EOF >> "$cfgfile"
-# AIX sometimes has problems with the GCC collect2 program.  For some
-# reason, if we set the COLLECT_NAMES environment variable, the problems
-# vanish in a puff of smoke.
-if test "X${COLLECT_NAMES+set}" != Xset; then
-  COLLECT_NAMES=
-  export COLLECT_NAMES
-fi
-_LT_EOF
-    ;;
-  esac
-
-
-ltmain="$ac_aux_dir/ltmain.sh"
-
-
-  # We use sed instead of cat because bash on DJGPP gets confused if
-  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
-  # text mode, it properly converts lines to CR/LF.  This bash problem
-  # is reportedly fixed, but why not run on old versions too?
-  sed '$q' "$ltmain" >> "$cfgfile" \
-     || (rm -f "$cfgfile"; exit 1)
-
-  if test x"$xsi_shell" = xyes; then
-  sed -e '/^func_dirname ()$/,/^} # func_dirname /c\
-func_dirname ()\
-{\
-\    case ${1} in\
-\      */*) func_dirname_result="${1%/*}${2}" ;;\
-\      *  ) func_dirname_result="${3}" ;;\
-\    esac\
-} # Extended-shell func_dirname implementation' "$cfgfile" > $cfgfile.tmp \
-  && mv -f "$cfgfile.tmp" "$cfgfile" \
-    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
-  sed -e '/^func_basename ()$/,/^} # func_basename /c\
-func_basename ()\
-{\
-\    func_basename_result="${1##*/}"\
-} # Extended-shell func_basename implementation' "$cfgfile" > $cfgfile.tmp \
-  && mv -f "$cfgfile.tmp" "$cfgfile" \
-    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
-  sed -e '/^func_dirname_and_basename ()$/,/^} # func_dirname_and_basename /c\
-func_dirname_and_basename ()\
-{\
-\    case ${1} in\
-\      */*) func_dirname_result="${1%/*}${2}" ;;\
-\      *  ) func_dirname_result="${3}" ;;\
-\    esac\
-\    func_basename_result="${1##*/}"\
-} # Extended-shell func_dirname_and_basename implementation' "$cfgfile" > $cfgfile.tmp \
-  && mv -f "$cfgfile.tmp" "$cfgfile" \
-    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
-  sed -e '/^func_stripname ()$/,/^} # func_stripname /c\
-func_stripname ()\
-{\
-\    # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are\
-\    # positional parameters, so assign one to ordinary parameter first.\
-\    func_stripname_result=${3}\
-\    func_stripname_result=${func_stripname_result#"${1}"}\
-\    func_stripname_result=${func_stripname_result%"${2}"}\
-} # Extended-shell func_stripname implementation' "$cfgfile" > $cfgfile.tmp \
-  && mv -f "$cfgfile.tmp" "$cfgfile" \
-    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
-  sed -e '/^func_split_long_opt ()$/,/^} # func_split_long_opt /c\
-func_split_long_opt ()\
-{\
-\    func_split_long_opt_name=${1%%=*}\
-\    func_split_long_opt_arg=${1#*=}\
-} # Extended-shell func_split_long_opt implementation' "$cfgfile" > $cfgfile.tmp \
-  && mv -f "$cfgfile.tmp" "$cfgfile" \
-    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
-  sed -e '/^func_split_short_opt ()$/,/^} # func_split_short_opt /c\
-func_split_short_opt ()\
-{\
-\    func_split_short_opt_arg=${1#??}\
-\    func_split_short_opt_name=${1%"$func_split_short_opt_arg"}\
-} # Extended-shell func_split_short_opt implementation' "$cfgfile" > $cfgfile.tmp \
-  && mv -f "$cfgfile.tmp" "$cfgfile" \
-    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
-  sed -e '/^func_lo2o ()$/,/^} # func_lo2o /c\
-func_lo2o ()\
-{\
-\    case ${1} in\
-\      *.lo) func_lo2o_result=${1%.lo}.${objext} ;;\
-\      *)    func_lo2o_result=${1} ;;\
-\    esac\
-} # Extended-shell func_lo2o implementation' "$cfgfile" > $cfgfile.tmp \
-  && mv -f "$cfgfile.tmp" "$cfgfile" \
-    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
-  sed -e '/^func_xform ()$/,/^} # func_xform /c\
-func_xform ()\
-{\
-    func_xform_result=${1%.*}.lo\
-} # Extended-shell func_xform implementation' "$cfgfile" > $cfgfile.tmp \
-  && mv -f "$cfgfile.tmp" "$cfgfile" \
-    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
-  sed -e '/^func_arith ()$/,/^} # func_arith /c\
-func_arith ()\
-{\
-    func_arith_result=$(( $* ))\
-} # Extended-shell func_arith implementation' "$cfgfile" > $cfgfile.tmp \
-  && mv -f "$cfgfile.tmp" "$cfgfile" \
-    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
-  sed -e '/^func_len ()$/,/^} # func_len /c\
-func_len ()\
-{\
-    func_len_result=${#1}\
-} # Extended-shell func_len implementation' "$cfgfile" > $cfgfile.tmp \
-  && mv -f "$cfgfile.tmp" "$cfgfile" \
-    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-fi
-
-if test x"$lt_shell_append" = xyes; then
-  sed -e '/^func_append ()$/,/^} # func_append /c\
-func_append ()\
-{\
-    eval "${1}+=\\${2}"\
-} # Extended-shell func_append implementation' "$cfgfile" > $cfgfile.tmp \
-  && mv -f "$cfgfile.tmp" "$cfgfile" \
-    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
-  sed -e '/^func_append_quoted ()$/,/^} # func_append_quoted /c\
-func_append_quoted ()\
-{\
-\    func_quote_for_eval "${2}"\
-\    eval "${1}+=\\\\ \\$func_quote_for_eval_result"\
-} # Extended-shell func_append_quoted implementation' "$cfgfile" > $cfgfile.tmp \
-  && mv -f "$cfgfile.tmp" "$cfgfile" \
-    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
-  # Save a `func_append' function call where possible by direct use of '+='
-  sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \
-    && mv -f "$cfgfile.tmp" "$cfgfile" \
-      || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-  test 0 -eq $? || _lt_function_replace_fail=:
-else
-  # Save a `func_append' function call even when '+=' is not available
-  sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \
-    && mv -f "$cfgfile.tmp" "$cfgfile" \
-      || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-  test 0 -eq $? || _lt_function_replace_fail=:
-fi
-
-if test x"$_lt_function_replace_fail" = x":"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Unable to substitute extended shell functions in $ofile" >&5
-$as_echo "$as_me: WARNING: Unable to substitute extended shell functions in $ofile" >&2;}
-fi
-
-
-   mv -f "$cfgfile" "$ofile" ||
-    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
-  chmod +x "$ofile"
-
- ;;
-    "atf-config":C) (
-		 mkdir -p unit/atf-src;
-		 cd unit/atf-src;
-		 case "$srcdir" in
-		 /*) ;;
-		 *) srcdir="../../$srcdir";;
-		 esac
-		 ${SHELL} ${srcdir}${srcdir:+/unit/atf-src/}./configure MISSING=: --prefix $atfdir;
-		)  ;;
-    "chmod":C) chmod a+x isc-config.sh doc/doxygen/doxygen-input-filter ;;
-
-  esac
-done # for ac_tag
-
-
-as_fn_exit 0
-_ACEOF
-ac_clean_files=$ac_clean_files_save
-
-test $ac_write_fail = 0 ||
-  as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5
-
-
-# configure is writing to config.log, and then calls config.status.
-# config.status does its own redirection, appending to config.log.
-# Unfortunately, on DOS this fails, as config.log is still kept open
-# by configure, so config.status won't be able to write to it; its
-# output is simply discarded.  So we exec the FD to /dev/null,
-# effectively closing config.log, so it can be properly (re)opened and
-# appended to by config.status.  When coming back to configure, we
-# need to make the FD available again.
-if test "$no_create" != yes; then
-  ac_cs_success=:
-  ac_config_status_args=
-  test "$silent" = yes &&
-    ac_config_status_args="$ac_config_status_args --quiet"
-  exec 5>/dev/null
-  $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
-  exec 5>>config.log
-  # Use ||, not &&, to avoid exiting from the if with $? = 1, which
-  # would make configure fail if this is the last instruction.
-  $ac_cs_success || as_fn_exit 1
-fi
-if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
-$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
-fi
-
-
-#
-# Now that the Makefiles exist we can ensure that everything is rebuilt.
-#
-
-# Check whether --with-make-clean was given.
-if test "${with_make_clean+set}" = set; then :
-  withval=$with_make_clean; make_clean="$withval"
-else
-  make_clean="yes"
-fi
-
-case "$make_clean" in
-yes)
-	make clean
-	;;
-esac
-
-if test "X$USE_OPENSSL" = "X"; then
-cat << \EOF
-BIND is being built without OpenSSL. This means it will not have DNSSEC support.
-EOF
-fi
-
-if test "X$OPENSSL_WARNING" != "X"; then
-cat << \EOF
-WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING
-WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING
-WARNING                                                                 WARNING
-WARNING         Your OpenSSL crypto library may be vulnerable to        WARNING
-WARNING         one or more of the the following known security         WARNING
-WARNING         flaws:                                                  WARNING
-WARNING                                                                 WARNING
-WARNING         CAN-2002-0659, CAN-2006-4339, CVE-2006-2937 and         WARNING
-WARNING         CVE-2006-2940.                                          WARNING
-WARNING                                                                 WARNING
-WARNING         It is recommended that you upgrade to OpenSSL           WARNING
-WARNING         version 0.9.8d/0.9.7l (or greater).                     WARNING
-WARNING                                                                 WARNING
-WARNING         You can disable this warning by specifying:             WARNING
-WARNING                                                                 WARNING
-WARNING               --disable-openssl-version-check          	        WARNING
-WARNING                                                                 WARNING
-WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING
-WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING
-EOF
-fi
-
-# Tell Emacs to edit this file in shell mode.
-# Local Variables:
-# mode: sh
-# End:

Modified: vendor/bind/dist/configure.in
===================================================================
--- vendor/bind/dist/configure.in	2016-11-03 12:21:01 UTC (rev 9202)
+++ vendor/bind/dist/configure.in	2016-11-03 12:22:00 UTC (rev 9203)
@@ -1,4 +1,4 @@
-# Copyright (C) 2004-2013  Internet Systems Consortium, Inc. ("ISC")
+# Copyright (C) 2004-2014  Internet Systems Consortium, Inc. ("ISC")
 # Copyright (C) 1998-2003  Internet Software Consortium.
 #
 # Permission to use, copy, modify, and/or distribute this software for any
@@ -15,12 +15,10 @@
 
 dnl
 AC_DIVERT_PUSH(1)dnl
-esyscmd([sed "s/^/# /" COPYRIGHT])dnl
+esyscmd([sed -e 's/^/# /' -e '/Portions of this code/,$d' COPYRIGHT])dnl
 AC_DIVERT_POP()dnl
 
-AC_REVISION($Revision: 1.1.1.2 $)
-
-AC_INIT(lib/dns/name.c)
+AC_INIT(BIND, [9.8], [bind9-bugs at isc.org], [], [https://www.isc.org/downloads/BIND/])
 AC_PREREQ(2.59)
 
 AC_CONFIG_HEADER(config.h)
@@ -50,6 +48,8 @@
 AC_SUBST(STD_CDEFINES)
 AC_SUBST(STD_CWARNINGS)
 AC_SUBST(CCOPT)
+AC_SUBST(CCNOOPT)
+AC_SUBST(BACKTRACECFLAGS)
 
 # Warn if the user specified libbind, which is now deprecated
 AC_ARG_ENABLE(libbind, [  --enable-libbind	  deprecated])
@@ -63,6 +63,8 @@
 		;;
 esac
 
+AC_ARG_ENABLE(warn_error, [  --enable-warn-error	  turn on -Werror when compiling])
+
 AC_ARG_ENABLE(developer, [  --enable-developer      enable developer build settings])
 case "$enable_developer" in
 yes)
@@ -79,6 +81,8 @@
 		test "${enable_exportlib+set}" = set || enable_exportlib=yes
 		;;
 	esac
+	test "${enable_symtable+set}" = set || enable_symtable=all
+	test "${enable_warn_error+set}" = set || enable_warn_error=yes
 	;;
 esac
 #
@@ -282,7 +286,7 @@
 	# as it breaks how the two halves (Basic and Advanced) of the IPv6
 	# Socket API were designed to be used but we have to live with it.
 	# Define _GNU_SOURCE to pull in the IPv6 Advanced Socket API.
-	*-linux* | *-kfreebsd*-gnu)
+	*-linux* | *-kfreebsd*-gnu*)
 		STD_CDEFINES="$STD_CDEFINES -D_GNU_SOURCE"
 		CPPFLAGS="$CPPFLAGS -D_GNU_SOURCE"
 		;;
@@ -296,6 +300,13 @@
 	  ;;
 esac
 
+#
+# CCNOOPT defaults to -O0 on gcc and disables optimization when is last
+#
+if test "X$CCNOOPT" = "X" -a "X$GCC" = "Xyes"; then
+	CCNOOPT="-O0"
+fi
+
 AC_HEADER_STDC
 
 AC_CHECK_HEADERS(fcntl.h regex.h sys/time.h unistd.h sys/sockio.h sys/select.h sys/param.h sys/sysctl.h net/if6.h,,,
@@ -695,20 +706,20 @@
 ;;
 esac
 
-        AC_MSG_CHECKING(for OpenSSL DSA support)
-        if test -f $use_openssl/include/openssl/dsa.h
-        then
-                AC_DEFINE(HAVE_OPENSSL_DSA)
-                AC_MSG_RESULT(yes)
-        else
-                AC_MSG_RESULT(no)
-        fi
+	AC_MSG_CHECKING(for OpenSSL DSA support)
+	if test -f $use_openssl/include/openssl/dsa.h
+	then
+		AC_DEFINE(HAVE_OPENSSL_DSA)
+		AC_MSG_RESULT(yes)
+	else
+		AC_MSG_RESULT(no)
+	fi
 
-        AC_CHECK_FUNCS(EVP_sha256 EVP_sha384 EVP_sha512)
+	AC_CHECK_FUNCS(EVP_sha256 EVP_sha384 EVP_sha512)
 
-        AC_MSG_CHECKING(for OpenSSL ECDSA support)
-        have_ecdsa=""
-        AC_TRY_RUN([
+	AC_MSG_CHECKING(for OpenSSL ECDSA support)
+	have_ecdsa=""
+	AC_TRY_RUN([
 #include <stdio.h>
 #include <openssl/ecdsa.h>
 #include <openssl/objects.h>
@@ -725,42 +736,42 @@
 	return (0);
 }
 ],
-        [AC_MSG_RESULT(yes)
-        have_ecdsa="yes"],
-        [AC_MSG_RESULT(no)
-        have_ecdsa="no"],
-        [AC_MSG_RESULT(using --with-ecdsa)])
-        AC_ARG_WITH(ecdsa, [  --with-ecdsa            OpenSSL ECDSA],
-	            with_ecdsa="$withval", with_ecdsa="auto")
-        case "$with_ecdsa" in
-        yes)
-            case "$have_ecdsa" in
-            no)  AC_MSG_ERROR([ecdsa not supported]) ;;
-            *)  have_ecdsa=yes ;;
-            esac
-            ;;
-        no)
-            have_ecdsa=no ;;
-        *)
-            case "$have_ecdsa" in
-            yes|no) ;;
-            *) AC_MSG_ERROR([need --with-ecdsa=[[yes or no]]]) ;;
-            esac
-            ;;
-        esac
-        case $have_ecdsa in
-        yes)
-                OPENSSL_ECDSA="yes"
-                AC_DEFINE(HAVE_OPENSSL_ECDSA, 1,
-                          [Define if your OpenSSL version supports ECDSA.])
-                ;;
-        *)
-                ;;
-        esac
+	[AC_MSG_RESULT(yes)
+	have_ecdsa="yes"],
+	[AC_MSG_RESULT(no)
+	have_ecdsa="no"],
+	[AC_MSG_RESULT(using --with-ecdsa)])
+	AC_ARG_WITH(ecdsa, [  --with-ecdsa            OpenSSL ECDSA],
+		    with_ecdsa="$withval", with_ecdsa="auto")
+	case "$with_ecdsa" in
+	yes)
+	    case "$have_ecdsa" in
+	    no)  AC_MSG_ERROR([ecdsa not supported]) ;;
+	    *)  have_ecdsa=yes ;;
+	    esac
+	    ;;
+	no)
+	    have_ecdsa=no ;;
+	*)
+	    case "$have_ecdsa" in
+	    yes|no) ;;
+	    *) AC_MSG_ERROR([need --with-ecdsa=[[yes or no]]]) ;;
+	    esac
+	    ;;
+	esac
+	case $have_ecdsa in
+	yes)
+		OPENSSL_ECDSA="yes"
+		AC_DEFINE(HAVE_OPENSSL_ECDSA, 1,
+			  [Define if your OpenSSL version supports ECDSA.])
+		;;
+	*)
+		;;
+	esac
 
-        AC_MSG_CHECKING(for OpenSSL GOST support)
-        have_gost=""
-        AC_TRY_RUN([
+	AC_MSG_CHECKING(for OpenSSL GOST support)
+	have_gost=""
+	AC_TRY_RUN([
 #include <openssl/conf.h>
 #include <openssl/engine.h>
 int main() {
@@ -782,31 +793,31 @@
 #endif
 }
 ],
-        [AC_MSG_RESULT(yes)
-        have_gost="yes"],
-        [AC_MSG_RESULT(no)
-        have_gost="no"],
-        [AC_MSG_RESULT(using --with-gost)])
-        AC_ARG_WITH(gost, [  --with-gost             OpenSSL GOST],
-                    with_gost="$withval", with_gost="auto")
-        case "$with_gost" in
-        yes)
-            case "$have_gost" in
-            no)  AC_MSG_ERROR([gost not supported]) ;;
-            *)  have_gost=yes ;;
-            esac
-            ;;
-        no)
-            have_gost=no ;;
-        *)
-            case "$have_gost" in
-            yes|no) ;;
-            *) AC_MSG_ERROR([need --with-gost=[[yes or no]]]) ;;
-            esac
-            ;;
-        esac
-        case $have_gost in
-        yes)
+	[AC_MSG_RESULT(yes)
+	have_gost="yes"],
+	[AC_MSG_RESULT(no)
+	have_gost="no"],
+	[AC_MSG_RESULT(using --with-gost)])
+	AC_ARG_WITH(gost, [  --with-gost             OpenSSL GOST],
+		    with_gost="$withval", with_gost="auto")
+	case "$with_gost" in
+	yes)
+	    case "$have_gost" in
+	    no)  AC_MSG_ERROR([gost not supported]) ;;
+	    *)  have_gost=yes ;;
+	    esac
+	    ;;
+	no)
+	    have_gost=no ;;
+	*)
+	    case "$have_gost" in
+	    yes|no) ;;
+	    *) AC_MSG_ERROR([need --with-gost=[[yes or no]]]) ;;
+	    esac
+	    ;;
+	esac
+	case $have_gost in
+	yes)
 		OPENSSL_GOST="yes"
 		OPENSSLGOSTLINKOBJS='${OPENSSLGOSTLINKOBJS}'
 		OPENSSLGOSTLINKSRCS='${OPENSSLGOSTLINKSRCS}'
@@ -813,15 +824,15 @@
 		AC_DEFINE(HAVE_OPENSSL_GOST, 1,
 			  [Define if your OpenSSL version supports GOST.])
 		;;
-        *)
-                ;;
-        esac
-        CFLAGS="$saved_cflags"
-        LIBS="$saved_libs"
-        OPENSSLLINKOBJS='${OPENSSLLINKOBJS}'
-        OPENSSLLINKSRCS='${OPENSSLLINKSRCS}'
+	*)
+		;;
+	esac
+	CFLAGS="$saved_cflags"
+	LIBS="$saved_libs"
+	OPENSSLLINKOBJS='${OPENSSLLINKOBJS}'
+	OPENSSLLINKSRCS='${OPENSSLLINKSRCS}'
 
-        ;;
+	;;
 esac
 
 #
@@ -873,7 +884,7 @@
 AC_MSG_CHECKING(for PKCS11 support)
 AC_ARG_WITH(pkcs11,
 [  --with-pkcs11[=PATH]      Build with PKCS11 support [yes|no|path]
-                          (PATH is for the PKCS11 provider)],
+			  (PATH is for the PKCS11 provider)],
    use_pkcs11="$withval", use_pkcs11="no")
 
 case "$use_pkcs11" in
@@ -930,10 +941,10 @@
 	    for d in $krb5dirs
 	    do
 		if test -f $d/include/gssapi/gssapi_krb5.h -o \
-		        -f $d/include/krb5.h
+			-f $d/include/krb5.h
 		then
 			if test -f $d/include/gssapi/gssapi.h -o \
-			        -f $d/include/gssapi.h
+				-f $d/include/gssapi.h
 			then
 				use_gssapi=$d
 				break
@@ -958,7 +969,8 @@
 		saved_cppflags="$CPPFLAGS"
 		CPPFLAGS="-I$use_gssapi/include $CPPFLAGS"
 		AC_CHECK_HEADERS(gssapi.h gssapi/gssapi.h,
-		    [ISC_PLATFORM_GSSAPIHEADER="#define ISC_PLATFORM_GSSAPIHEADER <$ac_header>"])
+		    [ISC_PLATFORM_GSSAPIHEADER="#define ISC_PLATFORM_GSSAPIHEADER <$ac_header>"
+		     gssapi_hack="#include <$ac_header>"])
 
 		if test "$ISC_PLATFORM_GSSAPIHEADER" = ""; then
 		    AC_MSG_ERROR([gssapi.h not found])
@@ -965,17 +977,17 @@
 		fi
 
 		AC_CHECK_HEADERS(gssapi_krb5.h gssapi/gssapi_krb5.h,
-		    [ISC_PLATFORM_GSSAPI_KRB5_HEADER="#define ISC_PLATFORM_GSSAPI_KRB5_HEADER <$ac_header>"])
+		    [ISC_PLATFORM_GSSAPI_KRB5_HEADER="#define ISC_PLATFORM_GSSAPI_KRB5_HEADER <$ac_header>"
+		     gssapi_krb5_hack="#include <$ac_header>"])
 
 		AC_CHECK_HEADERS(krb5.h krb5/krb5.h kerberosv5/krb5.h,
-		    [ISC_PLATFORM_KRB5HEADER="#define ISC_PLATFORM_KRB5HEADER <$ac_header>"])
+		    [ISC_PLATFORM_KRB5HEADER="#define ISC_PLATFORM_KRB5HEADER <$ac_header>"
+		    krb5_hack="#include <$ac_header>"])
 
 		if test "$ISC_PLATFORM_KRB5HEADER" = ""; then
 		    AC_MSG_ERROR([krb5.h not found])
 		fi
 
-		CPPFLAGS="$saved_cppflags"
-
 		#
 		# XXXDCL This probably doesn't work right on all systems.
 		# It will need to be worked on as problems become evident.
@@ -1004,6 +1016,8 @@
 		    "-lgssapi" \
 		    "-lgssapi -lkrb5 -ldes -lcrypt -lasn1 -lroken -lcom_err" \
 		    "-lgssapi -lkrb5 -lcrypto -lcrypt -lasn1 -lroken -lcom_err" \
+		    "-lgssapi -lkrb5 -lgssapi_krb5 -lcrypto -lcrypt -lasn1 -lroken -lcom_err" \
+		    "-lgssapi -lkrb5 -lhx509 -lcrypto -lcrypt -lasn1 -lroken -lcom_err" \
 		    "-lgss -lkrb5"
 		do
 		    # Note that this does not include $saved_libs, because
@@ -1018,7 +1032,15 @@
 			    LIBS="-L$use_gssapi/lib $TRY_LIBS"
 		    fi
 		    AC_MSG_CHECKING(linking as $TRY_LIBS)
-		    AC_TRY_LINK( , [gss_acquire_cred();krb5_init_context()],
+		    AC_TRY_LINK([
+#include <sys/types.h>
+$gssapi_hack
+$gssapi_krb5_hack
+$krb5_hack
+				] , [gss_acquire_cred(NULL, NULL, 0, NULL, 0, NULL, NULL, NULL);krb5_init_context(NULL);
+#if defined(HAVE_GSSAPI_KRB5_H) || defined(HAVE_GSSAPI_GSSAPI_KRB5_H)
+gsskrb5_register_acceptor_identity(NULL);
+#endif],
 				gssapi_linked=yes, gssapi_linked=no)
 		    case $gssapi_linked in
 		    yes) AC_MSG_RESULT(yes); break ;;
@@ -1026,6 +1048,8 @@
 		    esac
 		done
 
+		CPPFLAGS="$saved_cppflags"
+
 		case $gssapi_linked in
 		no) AC_MSG_ERROR(could not determine proper GSSAPI linkage) ;;
 		esac
@@ -1136,9 +1160,11 @@
 esac
 
 #
-# Do we have arc4random() ?
+# Do we have arc4random(), etc ? arc4random_addrandom() has been removed
+# from OpenBSD 5.5 onwards.
 #
 AC_CHECK_FUNC(arc4random, AC_DEFINE(HAVE_ARC4RANDOM))
+AC_CHECK_FUNC(arc4random_addrandom, AC_DEFINE(HAVE_ARC4RANDOM_ADDRANDOM))
 
 sinclude(config.threads.in)dnl
 
@@ -1149,11 +1175,13 @@
 		*-freebsd*)
 			CC="$CC -pthread"
 			CCOPT="$CCOPT -pthread"
+			CCNOOPT="$CCNOOPT -pthread"
 			STD_CDEFINES="$STD_CDEFINES -D_THREAD_SAFE"
 			;;
 		*-openbsd*)
 			CC="$CC -pthread"
 			CCOPT="$CCOPT -pthread"
+			CCNOOPT="$CCNOOPT -pthread"
 			;;
 		*-solaris*)
 			LIBS="$LIBS -lthread"
@@ -1167,10 +1195,12 @@
 		*-dec-osf*)
 			CC="$CC -pthread"
 			CCOPT="$CCOPT -pthread"
+			CCNOOPT="$CCNOOPT -pthread"
 			;;
 		*-solaris*)
 			CC="$CC -mt"
 			CCOPT="$CCOPT -mt"
+			CCNOOPT="$CCNOOPT -mt"
 			;;
 		*-ibm-aix*)
 			STD_CDEFINES="$STD_CDEFINES -D_THREAD_SAFE"
@@ -1178,10 +1208,12 @@
 		*-sco-sysv*uw*|*-*-sysv*UnixWare*)
 			CC="$CC -Kthread"
 			CCOPT="$CCOPT -Kthread"
+			CCNOOPT="$CCNOOPT -Kthread"
 			;;
 		*-*-sysv*OpenUNIX*)
 			CC="$CC -Kpthread"
 			CCOPT="$CCOPT -Kpthread"
+			CCNOOPT="$CCNOOPT -Kpthread"
 			;;
 		esac
 	fi
@@ -1263,7 +1295,6 @@
 	# Look for sysconf to allow detection of the number of processors.
 	#
 	AC_CHECK_FUNC(sysconf, AC_DEFINE(HAVE_SYSCONF),)
-
 else
 	ISC_PLATFORM_USETHREADS="#undef ISC_PLATFORM_USETHREADS"
 	thread_dir=nothreads
@@ -1313,9 +1344,15 @@
 
 if test "X$libxml2_libs" != "X"
 then
-	AC_MSG_RESULT(yes)
 	CFLAGS="$CFLAGS $libxml2_cflags"
 	LIBS="$LIBS $libxml2_libs"
+	#
+	# Sanity check xml2-config output.
+	#
+	AC_TRY_LINK([#include <libxml/xmlwriter.h>],
+		    [return(xmlTextWriterStartElement(NULL, NULL));],
+		    AC_MSG_RESULT(yes),
+		    AC_MSG_ERROR(xml2-config returns badness))
 	AC_DEFINE(HAVE_LIBXML2, 1, [Define if libxml2 was found])
 else
 	AC_MSG_RESULT(no)
@@ -1369,28 +1406,48 @@
 IRIX_DNSSEC_WARNINGS_HACK=""
 
 if test "X$GCC" = "Xyes"; then
+	STD_CWARNINGS="$STD_CWARNINGS -W -Wall -Wmissing-prototypes -Wcast-qual -Wwrite-strings -Wformat -Wpointer-arith"
 	AC_MSG_CHECKING(if "$CC" supports -fno-strict-aliasing)
-	SAVE_CFLAGS=$CFLAGS
+	SAVE_CFLAGS="$CFLAGS"
 	CFLAGS="$CFLAGS -fno-strict-aliasing"
 	AC_TRY_COMPILE(,, [FNOSTRICTALIASING=yes],[FNOSTRICTALIASING=no])
-	CFLAGS=$SAVE_CFLAGS
+	CFLAGS="$SAVE_CFLAGS"
 	if test "$FNOSTRICTALIASING" = "yes"; then
 		AC_MSG_RESULT(yes)
-	STD_CWARNINGS="$STD_CWARNINGS -W -Wall -Wmissing-prototypes -Wcast-qual -Wwrite-strings -Wformat -Wpointer-arith -fno-strict-aliasing"
+		STD_CWARNINGS="$STD_CWARNINGS -fno-strict-aliasing"
 	else
 		AC_MSG_RESULT(no)
-	STD_CWARNINGS="$STD_CWARNINGS -W -Wall -Wmissing-prototypes -Wcast-qual -Wwrite-strings -Wformat -Wpointer-arith"
 	fi
+	#
+	# turn off delete null pointer checks
+	#
+	AC_MSG_CHECKING(if "$CC" supports -fno-delete-null-pointer-checks)
+	SAVE_CFLAGS="$CFLAGS"
+	CFLAGS="$CFLAGS -fno-delete-null-pointer-checks"
+	AC_TRY_COMPILE(,, [FNODELETENULLPOINTERCHECKS=yes],
+			  [FNODELETENULLPOINTERCHECKS=no])
+	CFLAGS="$SAVE_CFLAGS"
+	if test "$FNODELETENULLPOINTERCHECKS" = "yes"; then
+		AC_MSG_RESULT(yes)
+		STD_CWARNINGS="$STD_CWARNINGS -fno-delete-null-pointer-checks"
+	else
+		AC_MSG_RESULT(no)
+	fi
 	case "$host" in
 	*-hp-hpux*)
-		LDFLAGS="-Wl,+vnocompatwarnings $LDFLAGS"
+		CFLAGS="$CFLAGS -Wl,+vnocompatwarnings"
+		BACKTRACECFLAGS="$BACKTRACECFLAGS -Wl,+vnocompatwarnings"
 		;;
 	esac
+	if test "X$enable_warn_error" = Xyes; then
+		STD_CWARNINGS="$STD_CWARNINGS -Werror"
+	fi
 else
 	case $host in
 	*-dec-osf*)
 		CC="$CC -std"
 		CCOPT="$CCOPT -std"
+		CCNOOPT="$CCNOOPT -std"
 		MKDEPCC="$CC"
 		;;
 	*-hp-hpux*)
@@ -1409,7 +1466,9 @@
 			;;
 		esac
 		CCOPT="$CCOPT -Ae -z"
-		LDFLAGS="-Wl,+vnocompatwarnings $LDFLAGS"
+		CCNOOPT="$CCNOOPT -Ae -z"
+		CFLAGS="$CFLAGS -Wl,+vnocompatwarnings"
+		BACKTRACECFLAGS="$BACKTRACECFLAGS -Wl,+vnocompatwarnings"
 		MKDEPPROG='cc -Ae -E -Wp,-M >/dev/null 2>>$TMP'
 		;;
 	*-sgi-irix*)
@@ -1515,7 +1574,6 @@
 
 AC_SUBST(PURIFY)
 
-
 AC_ARG_WITH(libtool,
 	    [  --with-libtool          use GNU libtool],
 	    use_libtool="$withval", use_libtool="no")
@@ -1529,6 +1587,7 @@
 		LIBTOOL_MODE_COMPILE='--mode=compile --tag=CC'
 		LIBTOOL_MODE_INSTALL='--mode=install --tag=CC'
 		LIBTOOL_MODE_LINK='--mode=link --tag=CC'
+		INSTALL_LIBRARY='${INSTALL_PROGRAM}'
 		case "$host" in
 		*) LIBTOOL_ALLOW_UNDEFINED= ;;
 		esac
@@ -1548,8 +1607,10 @@
 		LIBTOOL_MODE_LINK=
 		LIBTOOL_ALLOW_UNDEFINED=
 		LIBTOOL_IN_MAIN=
+		INSTALL_LIBRARY='${INSTALL_DATA}'
 		;;
 esac
+AC_SUBST(INSTALL_LIBRARY)
 
 #
 # enable/disable dumping stack backtrace.  Also check if the system supports
@@ -1573,7 +1634,7 @@
 
 AC_ARG_ENABLE(symtable,
 [  --enable-symtable       use internal symbol table for backtrace
-                          [[all|minimal(default)|none]]],
+			  [[all|minimal(default)|none]]],
 		want_symtable="$enableval",  want_symtable="minimal")
 case $want_symtable in
 yes|all|minimal)     # "yes" is a hidden value equivalent to "minimal"
@@ -1631,7 +1692,7 @@
 #
 AC_ARG_ENABLE(exportlib,
 	[  --enable-exportlib	  build exportable library (GNU make required)
-                          [[default=no]]])
+			  [[default=no]]])
 case "$enable_exportlib" in
 	yes)
 		gmake=
@@ -1656,8 +1717,8 @@
 
 AC_ARG_WITH(export-libdir,
 	[  --with-export-libdir[=PATH]
-                          installation directory for the export library
-                          [[EPREFIX/lib/bind9]]],
+			  installation directory for the export library
+			  [[EPREFIX/lib/bind9]]],
 	export_libdir="$withval",)
 if test -z "$export_libdir"; then
 	export_libdir="\${exec_prefix}/lib/bind9/"
@@ -1666,8 +1727,8 @@
 
 AC_ARG_WITH(export-includedir,
 	[  --with-export-includedir[=PATH]
-                          installation directory for the header files of the
-                          export library [[PREFIX/include/bind9]]],
+			  installation directory for the header files of the
+			  export library [[PREFIX/include/bind9]]],
 	export_includedir="$withval",)
 if test -z "$export_includedir"; then
 	export_includedir="\${prefix}/include/bind9/"
@@ -2155,7 +2216,7 @@
 #include <sys/socket.h>
 #include <netdb.h>
 int getnameinfo(const struct sockaddr *, socklen_t, char *,
-                socklen_t, char *, socklen_t, unsigned int);],
+		socklen_t, char *, socklen_t, unsigned int);],
 [ return (0);],
 	[AC_MSG_RESULT(socklen_t for buflen; u_int for flags)
 	 AC_DEFINE(IRS_GETNAMEINFO_BUFLEN_T, socklen_t,
@@ -2167,7 +2228,7 @@
 #include <sys/socket.h>
 #include <netdb.h>
 int getnameinfo(const struct sockaddr *, socklen_t, char *,
-                size_t, char *, size_t, int);],
+		size_t, char *, size_t, int);],
 [ return (0);],
 	[AC_MSG_RESULT(size_t for buflen; int for flags)
 	 AC_DEFINE(IRS_GETNAMEINFO_BUFLEN_T, size_t)
@@ -2282,9 +2343,12 @@
 AC_SUBST(GENRANDOMLIB)
 
 AC_CHECK_FUNC(strlcpy,
-	[ISC_PLATFORM_NEEDSTRLCPY="#undef ISC_PLATFORM_NEEDSTRLCPY"],
-	[ISC_PLATFORM_NEEDSTRLCPY="#define ISC_PLATFORM_NEEDSTRLCPY 1"])
+	[ISC_PLATFORM_NEEDSTRLCPY="#undef ISC_PLATFORM_NEEDSTRLCPY"
+         LWRES_PLATFORM_NEEDSTRLCPY="#undef LWRES_PLATFORM_NEEDSTRLCPY"],
+	[ISC_PLATFORM_NEEDSTRLCPY="#define ISC_PLATFORM_NEEDSTRLCPY 1"
+         LWRES_PLATFORM_NEEDSTRLCPY="#define LWRES_PLATFORM_NEEDSTRLCPY 1"])
 AC_SUBST(ISC_PLATFORM_NEEDSTRLCPY)
+AC_SUBST(LWRES_PLATFORM_NEEDSTRLCPY)
 
 AC_CHECK_FUNC(strlcat,
 	[ISC_PLATFORM_NEEDSTRLCAT="#undef ISC_PLATFORM_NEEDSTRLCAT"],
@@ -2408,7 +2472,13 @@
 	[  --disable-linux-caps	  disable linux capabilities])
 case "$enable_linux_caps" in
 	yes|'')
-		AC_CHECK_HEADERS(linux/capability.h sys/capability.h)
+		AC_CHECK_HEADERS(linux/types.h)
+		AC_CHECK_HEADERS([sys/capability.h])
+		AC_CHECK_HEADERS([linux/capability.h], [], [],
+				 [#ifdef HAVE_LINUX_TYPES_H
+				  #include <linux/types.h>
+				  #endif
+				 ])
 		AC_CHECK_LIB(cap, cap_set_proc)
 		;;
 	no)
@@ -2500,7 +2570,7 @@
 # Older HP-UX doesn't have gettune
 #
 case "$host" in
-  	*-hp-hpux*)
+	*-hp-hpux*)
 		AC_CHECK_HEADERS(sys/dyntune.h)
 		;;
 	*)
@@ -2634,6 +2704,7 @@
 case $ac_cv_have_if_nametoindex in
 yes)
 	ISC_PLATFORM_HAVEIFNAMETOINDEX="#define ISC_PLATFORM_HAVEIFNAMETOINDEX 1"
+	AC_DEFINE(HAVE_IF_NAMETOINDEX, 1)
 	;;
 *)
 	ISC_PLATFORM_HAVEIFNAMETOINDEX="#undef ISC_PLATFORM_HAVEIFNAMETOINDEX"
@@ -2701,7 +2772,7 @@
 	[i[3456]86-*])
 		# XXX: some old x86 architectures actually do not support
 		#      (some of) these operations.  Do we need stricter checks?
-                AC_CHECK_SIZEOF([void *])
+		AC_CHECK_SIZEOF([void *])
 		if test $ac_cv_sizeof_void_p = 8; then
 			arch=x86_64
 			have_xaddq=yes
@@ -2710,7 +2781,7 @@
 		fi
 	;;
 	x86_64-*|amd64-*)
-                AC_CHECK_SIZEOF([void *])
+		AC_CHECK_SIZEOF([void *])
 		if test $ac_cv_sizeof_void_p = 8; then
 			arch=x86_64
 			have_xaddq=yes
@@ -3034,7 +3105,7 @@
 	;;
 *)
 	docbook_xsl_trees="$withval"
-    	AC_MSG_RESULT($docbook_xsl_trees)
+	AC_MSG_RESULT($docbook_xsl_trees)
 	;;
 esac
 
@@ -3180,7 +3251,7 @@
 		 /*) ;;
 		 *) srcdir="../../$srcdir";;
 		 esac
-		 ${SHELL} ${srcdir}${srcdir:+/unit/atf-src/}./configure MISSING=: --prefix $atfdir;
+		 ${SHELL} "${srcdir}${srcdir:+/unit/atf-src/}./configure" --enable-tools --disable-shared MISSING=: --prefix $atfdir;
 		) ],
 		[atfdir=`pwd`/unit/atf])
 	AC_MSG_RESULT(building ATF from bind9/unit/atf-src)
@@ -3238,19 +3309,22 @@
 AC_SUBST_FILE(BIND9_MAKE_RULES)
 BIND9_MAKE_RULES=$BIND9_TOP_BUILDDIR/make/rules
 
-. $srcdir/version
+. "$srcdir/version"
 BIND9_PRODUCT="PRODUCT=\"${PRODUCT}\""
 AC_SUBST(BIND9_PRODUCT)
 BIND9_DESCRIPTION="DESCRIPTION=\"${DESCRIPTION}\""
 AC_SUBST(BIND9_DESCRIPTION)
-BIND9_VERSION="VERSION=${MAJORVER}.${MINORVER}${PATCHVER:+.}${PATCHVER}${RELEASETYPE}${RELEASEVER}"
+BIND9_VERSION="VERSION=${MAJORVER}.${MINORVER}${PATCHVER:+.}${PATCHVER}${RELEASETYPE}${RELEASEVER}${EXTENSIONS}"
 AC_SUBST(BIND9_VERSION)
 
 BIND9_SRCID="SRCID=unset"
-if test -f $srcdir/srcid; then
-	. $srcdir/srcid
+if test -f "${srcdir}/srcid"; then
+	. "${srcdir}/srcid"
 	BIND9_SRCID="SRCID=$SRCID"
+elif test -d "${srcdir}/.git"; then
+	BIND9_SRCID="SRCID="`(cd "${srcdir}";git rev-parse --short HEAD)`
 fi
+
 AC_SUBST(BIND9_SRCID)
 
 if test -z "$ac_configure_args"; then
@@ -3266,25 +3340,25 @@
 AC_SUBST(BIND9_CONFIGARGS)
 
 AC_SUBST_FILE(LIBISC_API)
-LIBISC_API=$srcdir/lib/isc/api
+LIBISC_API="$srcdir/lib/isc/api"
 
 AC_SUBST_FILE(LIBISCCC_API)
-LIBISCCC_API=$srcdir/lib/isccc/api
+LIBISCCC_API="$srcdir/lib/isccc/api"
 
 AC_SUBST_FILE(LIBISCCFG_API)
-LIBISCCFG_API=$srcdir/lib/isccfg/api
+LIBISCCFG_API="$srcdir/lib/isccfg/api"
 
 AC_SUBST_FILE(LIBDNS_API)
-LIBDNS_API=$srcdir/lib/dns/api
+LIBDNS_API="$srcdir/lib/dns/api"
 
 AC_SUBST_FILE(LIBBIND9_API)
-LIBBIND9_API=$srcdir/lib/bind9/api
+LIBBIND9_API="$srcdir/lib/bind9/api"
 
 AC_SUBST_FILE(LIBLWRES_API)
-LIBLWRES_API=$srcdir/lib/lwres/api
+LIBLWRES_API="$srcdir/lib/lwres/api"
 
 AC_SUBST_FILE(LIBIRS_API)
-LIBIRS_API=$srcdir/lib/irs/api
+LIBIRS_API="$srcdir/lib/irs/api"
 
 #
 # Configure any DLZ drivers.
@@ -3314,6 +3388,7 @@
 #
 SO="so"
 SO_CFLAGS=""
+SO_LDFLAGS=""
 SO_LD=""
 SO_TARGETS=""
 
@@ -3331,37 +3406,44 @@
 	if test "$have_dl" = "yes"; then
 		LIBS="-ldl $LIBS"
 	fi
-        AC_CHECK_FUNCS(dlopen dlclose dlsym,,dlopen=no)
+	AC_CHECK_FUNCS(dlopen dlclose dlsym,,dlopen=no)
 fi
 
 if test "$dlopen" = "yes"; then
 	case $host in
-		*-linux*)
+		*-linux*|*-gnu*)
 			SO_CFLAGS="-fPIC"
+			SO_LDFLAGS=""
 			if test "$have_dl" = "yes"
 			then
 				if test "$use_libtool" = "yes"; then
-					SO_LD="${CC} -Xcompiler -shared"
+					SO_LDFLAGS="-Xcompiler -shared"
+					SO_LD="${CC}"
 				else
-					SO_LD="${CC} -shared"
+					SO_LDFLAGS="-shared"
+					SO_LD="${CC}"
 				fi
 			else
-				SO_LD="ld -shared"
+				SO_LDFLAGS="-shared"
+				SO_LD="ld"
 			fi
 			;;
 		*-freebsd*|*-openbsd*|*-netbsd*)
 			SO_CFLAGS="-fpic"
-			SO_LD="ld -Bshareable -x"
+			SO_LDFLAGS="-Bshareable -x"
+			SO_LD="ld"
 			;;
 		*-solaris*)
 			SO_CFLAGS="-KPIC"
-			SO_LD="ld -G -z text"
-                        ;;
+			SO_LDFLAGS="-G -z text"
+			SO_LD="ld"
+			;;
 		*-hp-hpux*)
 			SO=sl
 			SO_CFLAGS="+z"
-			SO_LD="ld -b"
-                        ;;
+			SO_LDFLAGS="-b +vnocompatwarnings"
+			SO_LD="ld"
+			;;
 		*)
 			SO_CFLAGS="-fPIC"
 			;;
@@ -3369,7 +3451,16 @@
 
 	if test "X$GCC" = "Xyes"; then
 		SO_CFLAGS="-fPIC"
-                test -n "$SO_LD" || SO_LD="${CC} -shared"
+		if test -z "$SO_LD"
+		then
+			if test "$use_libtool" = "yes"; then
+				SO_LDFLAGS="-Xcompiler -shared"
+				SO_LD="${CC}"
+			else
+				SO_LDFLAGS="-shared"
+				SO_LD="${CC}"
+			fi
+		fi
 	fi
 
 	# If we still don't know how to make shared objects, don't make any.
@@ -3382,6 +3473,7 @@
 
 AC_SUBST(SO)
 AC_SUBST(SO_CFLAGS)
+AC_SUBST(SO_LDFLAGS)
 AC_SUBST(SO_LD)
 AC_SUBST(SO_TARGETS)
 
@@ -3408,7 +3500,7 @@
 
 if test "$cross_compiling" = "yes"; then
 	if test -z "$BUILD_CC"; then
-		AC_ERROR([BUILD_CC not set])
+		AC_MSG_ERROR([BUILD_CC not set])
 	fi
 	BUILD_CFLAGS="$BUILD_CFLAGS"
 	BUILD_CPPFLAGS="$BUILD_CPPFLAGS"
@@ -3576,12 +3668,11 @@
 	bin/tests/sockaddr/Makefile
 	bin/tests/system/Makefile
 	bin/tests/system/conf.sh
+	bin/tests/system/builtin/Makefile
 	bin/tests/system/dlz/prereq.sh
 	bin/tests/system/dlzexternal/Makefile
 	bin/tests/system/dlzexternal/ns1/named.conf
-	bin/tests/system/ecdsa/prereq.sh
 	bin/tests/system/filter-aaaa/Makefile
-	bin/tests/system/gost/prereq.sh
 	bin/tests/system/lwresd/Makefile
 	bin/tests/system/rpz/Makefile
 	bin/tests/system/tkey/Makefile
@@ -3669,6 +3760,7 @@
 	lib/lwres/include/lwres/netdb.h
 	lib/lwres/include/lwres/platform.h
 	lib/lwres/man/Makefile
+	lib/lwres/tests/Makefile
 	lib/lwres/unix/Makefile
 	lib/lwres/unix/include/Makefile
 	lib/lwres/unix/include/lwres/Makefile
@@ -3697,6 +3789,86 @@
 	;;
 esac
 
+AC_ARG_ENABLE(full-report,
+	[  --enable-full-report	  report values of all configure options])
+
+echo "========================================================================"
+echo "Configuration summary:"
+echo "------------------------------------------------------------------------"
+echo "Optional features enabled:"
+$use_threads && echo "    Multiprocessing support (--enable-threads)"
+
+test "$use_gssapi" = "no" || echo "    GSS-API (--with-gssapi)"
+test "$use_pkcs11" = "no" || echo "    PKCS#11/Cryptoki support (--with-pkcs11)"
+test "$enable_fixed" = "yes" && \
+    echo "    Allow 'fixed' rrset-order (--enable-fixed-rrset)"
+test "$enable_filter" = "yes" && \
+    echo "    AAAA filtering (--enable-filter-aaaa)"
+test "$want_backtrace" = "yes" && \
+    echo "    Print backtrace on crash (--enable-backtrace)"
+test "$want_symtable" = "minimal" && \
+    echo "    Use symbol table for backtrace, named only (--enable-symtable)"
+test "$want_symtable" = "yes" -o "$want_symtable" = "all" && \
+    echo "    Use symbol table for backtrace, all binaries (--enable-symtable=all)"
+test "$atf" = "no" || echo "    Automated Testing Framework (--with-atf)"
+
+# these lines are only printed if run with --enable-full-report 
+if test "$enable_full_report" = "yes"; then
+    test "$enable_ipv6" = "no" -o "$found_ipv6" = "no" || \
+	echo "    IPv6 support (--enable-ipv6)"
+    test "X$USE_OPENSSL" = "X" || \
+	    echo "    OpenSSL cryptography/DNSSEC (--with-openssl)"
+    test "$OPENSSL_GOST" != "yes" || \
+	    echo "    GOST algorithm support (--with-gost)"
+    test "$OPENSSL_ECDSA" != "yes" || \
+	    echo "    ECDSA algorithm support (--with-ecdsa)"
+    test "X$libxml2_libs" = "X" || echo "    XML statistics (--with-libxml2)"
+fi
+
+echo "    Dynamically loadable zone (DLZ) drivers:"
+test "$use_dlz_bdb" = "no" || \
+    echo "        Berkeley DB (--with-dlz-bdb)"
+test "$use_dlz_ldap" = "no" || \
+    echo "        LDAP (--with-dlz-ldap)"
+test "$use_dlz_mysql" = "no" || \
+    echo "        MySQL (--with-dlz-mysql)"
+test "$use_dlz_odbc" = "no" || \
+    echo "        ODBC (--with-dlz-odbc)"
+test "$use_dlz_postgres" = "no" || \
+    echo "        Postgres (--with-dlz-postgres)"
+test "$use_dlz_filesystem" = "no" || \
+    echo "        Filesystem (--with-dlz-filesystem)"
+test "$use_dlz_stub" = "no" || \
+    echo "        Stub (--with-dlz-stub)"
+test "$use_dlz_bdb $use_dlz_ldap $use_dlz_mysql $use_dlz_odbc $use_dlz_postgres $use_dlz_filesystem $use_dlz_stub" = "no no no no no no no" && echo "        None"
+echo
+
+echo "Features disabled or unavailable on this platform:"
+$use_threads || echo "    Multiprocessing support (--enable-threads)"
+test "$enable_ipv6" = "no" -o "$found_ipv6" = "no" && \
+	echo "    IPv6 support (--enable-ipv6)"
+test "$use_gssapi" = "no" && echo "    GSS-API (--with-gssapi)"
+test "$use_pkcs11" = "no" && echo "    PKCS#11/Cryptoki support (--with-pkcs11)"
+test "$enable_fixed" = "yes" || \
+    echo "    Allow 'fixed' rrset-order (--enable-fixed-rrset)"
+test "$want_backtrace" = "yes" || \
+    echo "    Print backtrace on crash (--enable-backtrace)"
+test "$atf" = "no" && echo "    Automated Testing Framework (--with-atf)"
+test "X$USE_OPENSSL" = "X" && \
+	echo "    OpenSSL cryptography/DNSSEC (--with-openssl)"
+test "X$USE_OPENSSL" != "X" -a "$OPENSSL_GOST" != "yes" && \
+    echo "    GOST algorithm support (--with-gost)"
+test "X$USE_OPENSSL" != "X" -a "$OPENSSL_ECDSA" != "yes" && \
+    echo "    ECDSA algorithm support (--with-ecdsa)"
+test "X$libxml2_libs" = "X" && echo "    XML statistics (--with-libxml2)"
+
+if test "X$ac_unrecognized_opts" != "X"; then
+    echo
+    echo "Unrecognized options:"
+    echo "    $ac_unrecognized_opts"
+fi
+echo "========================================================================"
+
 if test "X$USE_OPENSSL" = "X"; then
 cat << \EOF                                                             
 BIND is being built without OpenSSL. This means it will not have DNSSEC support.

Modified: vendor/bind/dist/isc-config.sh.1
===================================================================
--- vendor/bind/dist/isc-config.sh.1	2016-11-03 12:21:01 UTC (rev 9202)
+++ vendor/bind/dist/isc-config.sh.1	2016-11-03 12:22:00 UTC (rev 9203)
@@ -1,4 +1,4 @@
-.\" Copyright (C) 2009, 2012  Internet Systems Consortium, Inc. ("ISC")
+.\" Copyright (C) 2009, 2012, 2014  Internet Systems Consortium, Inc. ("ISC")
 .\"
 .\" Permission to use, copy, modify, and/or distribute this software for any
 .\" purpose with or without fee is hereby granted, provided that the above
@@ -12,7 +12,7 @@
 .\" OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
 .\" PERFORMANCE OF THIS SOFTWARE.
 .\"
-.\" $Id: isc-config.sh.1,v 1.1.1.1 2013-01-30 01:44:56 laffer1 Exp $
+.\" $Id$
 .\"
 .hy 0
 .ad l
@@ -19,11 +19,11 @@
 .\"     Title: isc\-config.sh
 .\"    Author: 
 .\" Generator: DocBook XSL Stylesheets v1.71.1 <http://docbook.sf.net/>
-.\"      Date: December 19, 2008
+.\"      Date: February 18, 2009
 .\"    Manual: BIND9
 .\"    Source: BIND9
 .\"
-.TH "ISC\-CONFIG.SH" "1" "December 19, 2008" "BIND9" "BIND9"
+.TH "ISC\-CONFIG.SH" "1" "February 18, 2009" "BIND9" "BIND9"
 .\" disable hyphenation
 .nh
 .\" disable justification (adjust text to left margin only)
@@ -83,5 +83,5 @@
 .PP
 Internet Systems Consortium
 .SH "COPYRIGHT"
-Copyright \(co 2009 Internet Systems Consortium, Inc. ("ISC")
+Copyright \(co 2009, 2014 Internet Systems Consortium, Inc. ("ISC")
 .br

Modified: vendor/bind/dist/isc-config.sh.docbook
===================================================================
--- vendor/bind/dist/isc-config.sh.docbook	2016-11-03 12:21:01 UTC (rev 9202)
+++ vendor/bind/dist/isc-config.sh.docbook	2016-11-03 12:22:00 UTC (rev 9203)
@@ -2,7 +2,7 @@
                "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"
 	       [<!ENTITY mdash "—">]>
 <!--
- - Copyright (C) 2009  Internet Systems Consortium, Inc. ("ISC")
+ - Copyright (C) 2009, 2014  Internet Systems Consortium, Inc. ("ISC")
  -
  - Permission to use, copy, modify, and/or distribute this software for any
  - purpose with or without fee is hereby granted, provided that the above
@@ -17,10 +17,9 @@
  - PERFORMANCE OF THIS SOFTWARE.
 -->
 
-<!-- $Id: isc-config.sh.docbook,v 1.1.1.1 2013-01-30 01:44:56 laffer1 Exp $ -->
 <refentry id="man.isc-config.sh">
   <refentryinfo>
-    <date>December 19, 2008</date>
+    <date>February 18, 2009</date>
   </refentryinfo>
 
   <refmeta>
@@ -32,6 +31,7 @@
   <docinfo>
     <copyright>
       <year>2009</year>
+      <year>2014</year>
       <holder>Internet Systems Consortium, Inc. ("ISC")</holder>
     </copyright>
   </docinfo>

Modified: vendor/bind/dist/isc-config.sh.html
===================================================================
--- vendor/bind/dist/isc-config.sh.html	2016-11-03 12:21:01 UTC (rev 9202)
+++ vendor/bind/dist/isc-config.sh.html	2016-11-03 12:22:00 UTC (rev 9203)
@@ -1,5 +1,5 @@
 <!--
- - Copyright (C) 2009, 2012  Internet Systems Consortium, Inc. ("ISC")
+ - Copyright (C) 2009, 2012, 2014  Internet Systems Consortium, Inc. ("ISC")
  -
  - Permission to use, copy, modify, and/or distribute this software for any
  - purpose with or without fee is hereby granted, provided that the above
@@ -14,7 +14,7 @@
  - PERFORMANCE OF THIS SOFTWARE.
 -->
 
-<!-- $Id: isc-config.sh.html,v 1.1.1.1 2013-01-30 01:44:56 laffer1 Exp $ -->
+<!-- $Id$ -->
 <html>
 <head>
 <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
@@ -32,7 +32,7 @@
 <div class="cmdsynopsis"><p><code class="command">isc-config.sh</code>  [<code class="option">--cflags</code>] [<code class="option">--exec-prefix</code>] [<code class="option">--libs</code>] [<code class="option">--prefix</code>] [<code class="option">--version</code>] [libraries...]</p></div>
 </div>
 <div class="refsect1" lang="en">
-<a name="id2543363"></a><h2>DESCRIPTION</h2>
+<a name="id2543373"></a><h2>DESCRIPTION</h2>
 <p><span><strong class="command">isc-config.sh</strong></span>
 	prints information related to the installed version of ISC BIND,
 	such as the compiler and linker flags required to compile
@@ -53,7 +53,7 @@
     </p>
 </div>
 <div class="refsect1" lang="en">
-<a name="id2543397"></a><h2>OPTIONS</h2>
+<a name="id2543408"></a><h2>OPTIONS</h2>
 <div class="variablelist"><dl>
 <dt><span class="term">--cflags</span></dt>
 <dd><p>
@@ -86,7 +86,7 @@
 </dl></div>
 </div>
 <div class="refsect1" lang="en">
-<a name="id2543477"></a><h2>RETURN VALUES</h2>
+<a name="id2543488"></a><h2>RETURN VALUES</h2>
 <p><span><strong class="command">isc-config.sh</strong></span>
       returns an exit status of 1 if
       invoked with invalid arguments or no arguments at all.
@@ -94,7 +94,7 @@
     </p>
 </div>
 <div class="refsect1" lang="en">
-<a name="id2543489"></a><h2>AUTHOR</h2>
+<a name="id2543499"></a><h2>AUTHOR</h2>
 <p><span class="corpauthor">Internet Systems Consortium</span>
     </p>
 </div>

Modified: vendor/bind/dist/isc-config.sh.in
===================================================================
--- vendor/bind/dist/isc-config.sh.in	2016-11-03 12:21:01 UTC (rev 9202)
+++ vendor/bind/dist/isc-config.sh.in	2016-11-03 12:22:00 UTC (rev 9203)
@@ -15,7 +15,7 @@
 # OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
 # PERFORMANCE OF THIS SOFTWARE.
 
-# $Id: isc-config.sh.in,v 1.1.1.2 2013-08-22 22:51:51 laffer1 Exp $
+# $Id: isc-config.sh.in,v 1.17 2007/06/19 23:46:59 tbox Exp $
 
 prefix=@prefix@
 exec_prefix=@exec_prefix@

Modified: vendor/bind/dist/mkinstalldirs
===================================================================
--- vendor/bind/dist/mkinstalldirs	2016-11-03 12:21:01 UTC (rev 9202)
+++ vendor/bind/dist/mkinstalldirs	2016-11-03 12:22:00 UTC (rev 9203)
@@ -4,7 +4,7 @@
 # Created: 1993-05-16
 # Public domain
 
-# $Id: mkinstalldirs,v 1.1.1.1 2013-01-30 01:44:56 laffer1 Exp $
+# $Id$
 
 errstatus=0
 


Property changes on: vendor/bind/dist/mkinstalldirs
___________________________________________________________________
Deleted: svn:executable
## -1 +0,0 ##
-*
\ No newline at end of property


More information about the Midnightbsd-cvs mailing list