[Midnightbsd-cvs] mports [22949] trunk/net: KRACK safe.
laffer1 at midnightbsd.org
laffer1 at midnightbsd.org
Thu Oct 19 07:59:15 EDT 2017
Revision: 22949
http://svnweb.midnightbsd.org/mports/?rev=22949
Author: laffer1
Date: 2017-10-19 07:59:14 -0400 (Thu, 19 Oct 2017)
Log Message:
-----------
KRACK safe.
Modified Paths:
--------------
trunk/net/Makefile
Added Paths:
-----------
trunk/net/hostapd/
trunk/net/hostapd/Makefile
trunk/net/hostapd/distinfo
trunk/net/hostapd/files/
trunk/net/hostapd/files/config
trunk/net/hostapd/files/patch-crypto__openssl.c
trunk/net/hostapd/files/patch-src-l2_packet-l2_packet_freebsd.c
trunk/net/hostapd/files/patch-src_drivers_driver__bsd.c
trunk/net/hostapd/files/patch-src_utils_os.h
trunk/net/hostapd/files/patch-src_utils_os__unix.c
trunk/net/hostapd/files/patch-src_wps_wps__upnp.c
trunk/net/hostapd/pkg-descr
Modified: trunk/net/Makefile
===================================================================
--- trunk/net/Makefile 2017-10-19 11:57:31 UTC (rev 22948)
+++ trunk/net/Makefile 2017-10-19 11:59:14 UTC (rev 22949)
@@ -33,6 +33,7 @@
SUBDIR += grilo-plugins
SUBDIR += gtk-vnc
SUBDIR += hinfo
+SUBDIR += hostapd
SUBDIR += hping
SUBDIR += htpdate
SUBDIR += hupnp
Added: trunk/net/hostapd/Makefile
===================================================================
--- trunk/net/hostapd/Makefile (rev 0)
+++ trunk/net/hostapd/Makefile 2017-10-19 11:59:14 UTC (rev 22949)
@@ -0,0 +1,49 @@
+# $FreeBSD: head/net/hostapd/Makefile 452257 2017-10-17 01:30:47Z cy $
+# $MidnightBSD$
+
+PORTNAME= hostapd
+PORTVERSION= 2.6
+PORTREVISION= 1
+CATEGORIES= net
+MASTER_SITES= https://w1.fi/releases/
+PATCH_SITES= https://w1.fi/security/2017-1/
+PATCHFILES= rebased-v2.6-0001-hostapd-Avoid-key-reinstallation-in-FT-handshake.patch \
+ rebased-v2.6-0002-Prevent-reinstallation-of-an-already-in-use-group-ke.patch \
+ rebased-v2.6-0003-Extend-protection-of-GTK-IGTK-reinstallation-of-WNM-.patch \
+ rebased-v2.6-0004-Prevent-installation-of-an-all-zero-TK.patch \
+ rebased-v2.6-0005-Fix-PTK-rekeying-to-generate-a-new-ANonce.patch \
+ rebased-v2.6-0006-TDLS-Reject-TPK-TK-reconfiguration.patch \
+ rebased-v2.6-0008-FT-Do-not-allow-multiple-Reassociation-Response-fram.patch
+PATCH_DIST_STRIP= -p1
+
+MAINTAINER= ports at MidnightBSD.org
+COMMENT= IEEE 802.11 AP, IEEE 802.1X/WPA/WPA2/EAP/RADIUS Authenticator
+
+LICENSE= bsd3
+
+USE_OPENSSL= yes
+USES= cpe gmake
+CPE_VENDOR= w1.f1
+BUILD_WRKSRC= ${WRKSRC}/hostapd
+CFLAGS+= -I${OPENSSLINC}
+LDFLAGS+= -L${OPENSSLLIB}
+
+PLIST_FILES= sbin/hostapd sbin/hostapd_cli man/man1/hostapd_cli.1.gz \
+ man/man8/hostapd.8.gz
+
+post-patch:
+ @${REINPLACE_CMD} -e 's|@$$(E) " CC " $$<|@$$(E) " $$(CC) " $$<|' \
+ ${BUILD_WRKSRC}/Makefile
+ @${SED} -e 's|@PREFIX@|${PREFIX}|g' ${FILESDIR}/config \
+ >> ${WRKSRC}/hostapd/.config
+
+do-install:
+ ${INSTALL_PROGRAM} ${WRKSRC}/hostapd/hostapd ${STAGEDIR}${PREFIX}/sbin
+ ${INSTALL_PROGRAM} ${WRKSRC}/hostapd/hostapd_cli \
+ ${STAGEDIR}${PREFIX}/sbin
+ ${INSTALL_MAN} ${WRKSRC}/hostapd/hostapd_cli.1 \
+ ${STAGEDIR}${MANPREFIX}/man/man1
+ ${INSTALL_MAN} ${WRKSRC}/hostapd/hostapd.8 \
+ ${STAGEDIR}${MANPREFIX}/man/man8
+
+.include <bsd.port.mk>
Property changes on: trunk/net/hostapd/Makefile
___________________________________________________________________
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Added: svn:keywords
## -0,0 +1 ##
+MidnightBSD=%H
\ No newline at end of property
Added: svn:mime-type
## -0,0 +1 ##
+text/plain
\ No newline at end of property
Added: trunk/net/hostapd/distinfo
===================================================================
--- trunk/net/hostapd/distinfo (rev 0)
+++ trunk/net/hostapd/distinfo 2017-10-19 11:59:14 UTC (rev 22949)
@@ -0,0 +1,17 @@
+TIMESTAMP = 1508200169
+SHA256 (hostapd-2.6.tar.gz) = 01526b90c1d23bec4b0f052039cc4456c2fd19347b4d830d1d58a0a6aea7117d
+SIZE (hostapd-2.6.tar.gz) = 1822341
+SHA256 (rebased-v2.6-0001-hostapd-Avoid-key-reinstallation-in-FT-handshake.patch) = 529113cc81256c6178f3c1cf25dd8d3f33e6d770e4a180bd31c6ab7e4917f40b
+SIZE (rebased-v2.6-0001-hostapd-Avoid-key-reinstallation-in-FT-handshake.patch) = 6218
+SHA256 (rebased-v2.6-0002-Prevent-reinstallation-of-an-already-in-use-group-ke.patch) = d86d47ab74170f3648b45b91bce780949ca92b09ab43df065178850ec0c335d7
+SIZE (rebased-v2.6-0002-Prevent-reinstallation-of-an-already-in-use-group-ke.patch) = 7883
+SHA256 (rebased-v2.6-0003-Extend-protection-of-GTK-IGTK-reinstallation-of-WNM-.patch) = d4535e36739a0cc7f3585e6bcba3c0bb8fc67cb3e729844e448c5dc751f47e81
+SIZE (rebased-v2.6-0003-Extend-protection-of-GTK-IGTK-reinstallation-of-WNM-.patch) = 6861
+SHA256 (rebased-v2.6-0004-Prevent-installation-of-an-all-zero-TK.patch) = 793a54748161b5af430dd9de4a1988d19cb8e85ab29bc2340f886b0297cee20b
+SIZE (rebased-v2.6-0004-Prevent-installation-of-an-all-zero-TK.patch) = 2566
+SHA256 (rebased-v2.6-0005-Fix-PTK-rekeying-to-generate-a-new-ANonce.patch) = 147c8abe07606905d16404fb2d2c8849796ca7c85ed8673c09bb50038bcdeb9e
+SIZE (rebased-v2.6-0005-Fix-PTK-rekeying-to-generate-a-new-ANonce.patch) = 1949
+SHA256 (rebased-v2.6-0006-TDLS-Reject-TPK-TK-reconfiguration.patch) = 596d4d3b63ea859ed7ea9791b3a21cb11b6173b04c0a14a2afa47edf1666afa6
+SIZE (rebased-v2.6-0006-TDLS-Reject-TPK-TK-reconfiguration.patch) = 4309
+SHA256 (rebased-v2.6-0008-FT-Do-not-allow-multiple-Reassociation-Response-fram.patch) = c8840d857b9432f3b488113c85c1ff5d4a4b8d81078b7033388dae1e990843b1
+SIZE (rebased-v2.6-0008-FT-Do-not-allow-multiple-Reassociation-Response-fram.patch) = 2750
Property changes on: trunk/net/hostapd/distinfo
___________________________________________________________________
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Added: svn:mime-type
## -0,0 +1 ##
+text/plain
\ No newline at end of property
Added: trunk/net/hostapd/files/config
===================================================================
--- trunk/net/hostapd/files/config (rev 0)
+++ trunk/net/hostapd/files/config 2017-10-19 11:59:14 UTC (rev 22949)
@@ -0,0 +1,316 @@
+# FreeBSD hostapd build time configuration
+#
+# This file lists the configuration options that are used when building the
+# hostapd binary. All lines starting with # are ignored. Configuration option
+# lines must be commented out complete, if they are not to be included, i.e.,
+# just setting VARIABLE=n is not disabling that variable.
+#
+# This file is included in Makefile, so variables like CFLAGS and LIBS can also
+# be modified from here. In most cass, these lines should use += in order not
+# to override previous values of the variables.
+
+# Driver interface for Host AP driver
+#CONFIG_DRIVER_HOSTAP=y
+
+# Driver interface for wired authenticator
+#CONFIG_DRIVER_WIRED=y
+
+# Driver interface for madwifi driver
+#CONFIG_DRIVER_MADWIFI=y
+#CFLAGS += -I../../madwifi # change to the madwifi source directory
+
+# Driver interface for drivers using the nl80211 kernel interface
+#CONFIG_DRIVER_NL80211=y
+
+# driver_nl80211.c requires libnl. If you are compiling it yourself
+# you may need to point hostapd to your version of libnl.
+#
+#CFLAGS += -I$<path to libnl include files>
+#LIBS += -L$<path to libnl library files>
+
+# Use libnl v2.0 (or 3.0) libraries.
+#CONFIG_LIBNL20=y
+
+# Use libnl 3.2 libraries (if this is selected, CONFIG_LIBNL20 is ignored)
+#CONFIG_LIBNL32=y
+
+# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
+CONFIG_DRIVER_BSD=y
+CFLAGS += -I at PREFIX@/include
+LIBS += -L at PREFIX@/lib
+LIBS_p += -L at PREFIX@/lib
+LIBS_c += -L at PREFIX@/lib
+
+# Driver interface for no driver (e.g., RADIUS server only)
+#CONFIG_DRIVER_NONE=y
+
+# IEEE 802.11F/IAPP
+#CONFIG_IAPP=y
+
+# WPA2/IEEE 802.11i RSN pre-authentication
+CONFIG_RSN_PREAUTH=y
+
+# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
+#CONFIG_PEERKEY=y
+
+# IEEE 802.11w (management frame protection)
+#CONFIG_IEEE80211W=y
+
+# Integrated EAP server
+CONFIG_EAP=y
+
+# EAP-MD5 for the integrated EAP server
+CONFIG_EAP_MD5=y
+
+# EAP-TLS for the integrated EAP server
+CONFIG_EAP_TLS=y
+
+# EAP-MSCHAPv2 for the integrated EAP server
+CONFIG_EAP_MSCHAPV2=y
+
+# EAP-PEAP for the integrated EAP server
+CONFIG_EAP_PEAP=y
+
+# EAP-GTC for the integrated EAP server
+CONFIG_EAP_GTC=y
+
+# EAP-TTLS for the integrated EAP server
+CONFIG_EAP_TTLS=y
+
+# EAP-SIM for the integrated EAP server
+#CONFIG_EAP_SIM=y
+
+# EAP-AKA for the integrated EAP server
+#CONFIG_EAP_AKA=y
+
+# EAP-AKA' for the integrated EAP server
+# This requires CONFIG_EAP_AKA to be enabled, too.
+#CONFIG_EAP_AKA_PRIME=y
+
+# EAP-PAX for the integrated EAP server
+#CONFIG_EAP_PAX=y
+
+# EAP-PSK for the integrated EAP server (this is _not_ needed for WPA-PSK)
+#CONFIG_EAP_PSK=y
+
+# EAP-pwd for the integrated EAP server (secure authentication with a password)
+#CONFIG_EAP_PWD=y
+
+# EAP-SAKE for the integrated EAP server
+#CONFIG_EAP_SAKE=y
+
+# EAP-GPSK for the integrated EAP server
+#CONFIG_EAP_GPSK=y
+# Include support for optional SHA256 cipher suite in EAP-GPSK
+#CONFIG_EAP_GPSK_SHA256=y
+
+# EAP-FAST for the integrated EAP server
+# Note: If OpenSSL is used as the TLS library, OpenSSL 1.0 or newer is needed
+# for EAP-FAST support. Older OpenSSL releases would need to be patched, e.g.,
+# with openssl-0.9.8x-tls-extensions.patch, to add the needed functions.
+#CONFIG_EAP_FAST=y
+
+# Wi-Fi Protected Setup (WPS)
+#CONFIG_WPS=y
+# Enable UPnP support for external WPS Registrars
+#CONFIG_WPS_UPNP=y
+# Enable WPS support with NFC config method
+#CONFIG_WPS_NFC=y
+
+# EAP-IKEv2
+#CONFIG_EAP_IKEV2=y
+
+# Trusted Network Connect (EAP-TNC)
+#CONFIG_EAP_TNC=y
+
+# EAP-EKE for the integrated EAP server
+#CONFIG_EAP_EKE=y
+
+# PKCS#12 (PFX) support (used to read private key and certificate file from
+# a file that usually has extension .p12 or .pfx)
+CONFIG_PKCS12=y
+
+# RADIUS authentication server. This provides access to the integrated EAP
+# server from external hosts using RADIUS.
+#CONFIG_RADIUS_SERVER=y
+
+# Build IPv6 support for RADIUS operations
+CONFIG_IPV6=y
+
+# IEEE Std 802.11r-2008 (Fast BSS Transition)
+#CONFIG_IEEE80211R=y
+
+# Use the hostapd's IEEE 802.11 authentication (ACL), but without
+# the IEEE 802.11 Management capability (e.g., madwifi or FreeBSD/net80211)
+CONFIG_DRIVER_RADIUS_ACL=y
+
+# IEEE 802.11n (High Throughput) support
+#CONFIG_IEEE80211N=y
+
+# Wireless Network Management (IEEE Std 802.11v-2011)
+# Note: This is experimental and not complete implementation.
+#CONFIG_WNM=y
+
+# IEEE 802.11ac (Very High Throughput) support
+#CONFIG_IEEE80211AC=y
+
+# Remove debugging code that is printing out debug messages to stdout.
+# This can be used to reduce the size of the hostapd considerably if debugging
+# code is not needed.
+#CONFIG_NO_STDOUT_DEBUG=y
+
+# Add support for writing debug log to a file: -f /tmp/hostapd.log
+# Disabled by default.
+#CONFIG_DEBUG_FILE=y
+
+# Add support for sending all debug messages (regardless of debug verbosity)
+# to the Linux kernel tracing facility. This helps debug the entire stack by
+# making it easy to record everything happening from the driver up into the
+# same file, e.g., using trace-cmd.
+#CONFIG_DEBUG_LINUX_TRACING=y
+
+# Remove support for RADIUS accounting
+#CONFIG_NO_ACCOUNTING=y
+
+# Remove support for RADIUS
+#CONFIG_NO_RADIUS=y
+
+# Remove support for VLANs
+#CONFIG_NO_VLAN=y
+
+# Enable support for fully dynamic VLANs. This enables hostapd to
+# automatically create bridge and VLAN interfaces if necessary.
+#CONFIG_FULL_DYNAMIC_VLAN=y
+
+# Use netlink-based kernel API for VLAN operations instead of ioctl()
+# Note: This requires libnl 3.1 or newer.
+#CONFIG_VLAN_NETLINK=y
+
+# Remove support for dumping internal state through control interface commands
+# This can be used to reduce binary size at the cost of disabling a debugging
+# option.
+#CONFIG_NO_DUMP_STATE=y
+
+# Enable tracing code for developer debugging
+# This tracks use of memory allocations and other registrations and reports
+# incorrect use with a backtrace of call (or allocation) location.
+#CONFIG_WPA_TRACE=y
+# For BSD, comment out these.
+#LIBS += -lexecinfo
+#LIBS_p += -lexecinfo
+#LIBS_c += -lexecinfo
+
+# Use libbfd to get more details for developer debugging
+# This enables use of libbfd to get more detailed symbols for the backtraces
+# generated by CONFIG_WPA_TRACE=y.
+#CONFIG_WPA_TRACE_BFD=y
+# For BSD, comment out these.
+#LIBS += -lbfd -liberty -lz
+#LIBS_p += -lbfd -liberty -lz
+#LIBS_c += -lbfd -liberty -lz
+
+# hostapd depends on strong random number generation being available from the
+# operating system. os_get_random() function is used to fetch random data when
+# needed, e.g., for key generation. On Linux and BSD systems, this works by
+# reading /dev/urandom. It should be noted that the OS entropy pool needs to be
+# properly initialized before hostapd is started. This is important especially
+# on embedded devices that do not have a hardware random number generator and
+# may by default start up with minimal entropy available for random number
+# generation.
+#
+# As a safety net, hostapd is by default trying to internally collect
+# additional entropy for generating random data to mix in with the data
+# fetched from the OS. This by itself is not considered to be very strong, but
+# it may help in cases where the system pool is not initialized properly.
+# However, it is very strongly recommended that the system pool is initialized
+# with enough entropy either by using hardware assisted random number
+# generator or by storing state over device reboots.
+#
+# hostapd can be configured to maintain its own entropy store over restarts to
+# enhance random number generation. This is not perfect, but it is much more
+# secure than using the same sequence of random numbers after every reboot.
+# This can be enabled with -e<entropy file> command line option. The specified
+# file needs to be readable and writable by hostapd.
+#
+# If the os_get_random() is known to provide strong random data (e.g., on
+# Linux/BSD, the board in question is known to have reliable source of random
+# data from /dev/urandom), the internal hostapd random pool can be disabled.
+# This will save some in binary size and CPU use. However, this should only be
+# considered for builds that are known to be used on devices that meet the
+# requirements described above.
+#CONFIG_NO_RANDOM_POOL=y
+
+# Select TLS implementation
+# openssl = OpenSSL (default)
+# gnutls = GnuTLS
+# internal = Internal TLSv1 implementation (experimental)
+# none = Empty template
+#CONFIG_TLS=openssl
+
+# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.1)
+# can be enabled to get a stronger construction of messages when block ciphers
+# are used.
+#CONFIG_TLSV11=y
+
+# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.2)
+# can be enabled to enable use of stronger crypto algorithms.
+#CONFIG_TLSV12=y
+
+# If CONFIG_TLS=internal is used, additional library and include paths are
+# needed for LibTomMath. Alternatively, an integrated, minimal version of
+# LibTomMath can be used. See beginning of libtommath.c for details on benefits
+# and drawbacks of this option.
+#CONFIG_INTERNAL_LIBTOMMATH=y
+#ifndef CONFIG_INTERNAL_LIBTOMMATH
+#LTM_PATH=/usr/src/libtommath-0.39
+#CFLAGS += -I$(LTM_PATH)
+#LIBS += -L$(LTM_PATH)
+#LIBS_p += -L$(LTM_PATH)
+#endif
+# At the cost of about 4 kB of additional binary size, the internal LibTomMath
+# can be configured to include faster routines for exptmod, sqr, and div to
+# speed up DH and RSA calculation considerably
+#CONFIG_INTERNAL_LIBTOMMATH_FAST=y
+
+# Interworking (IEEE 802.11u)
+# This can be used to enable functionality to improve interworking with
+# external networks.
+#CONFIG_INTERWORKING=y
+
+# Hotspot 2.0
+#CONFIG_HS20=y
+
+# Enable SQLite database support in hlr_auc_gw, EAP-SIM DB, and eap_user_file
+#CONFIG_SQLITE=y
+
+# Testing options
+# This can be used to enable some testing options (see also the example
+# configuration file) that are really useful only for testing clients that
+# connect to this hostapd. These options allow, for example, to drop a
+# certain percentage of probe requests or auth/(re)assoc frames.
+#
+#CONFIG_TESTING_OPTIONS=y
+
+# Automatic Channel Selection
+# This will allow hostapd to pick the channel automatically when channel is set
+# to "acs_survey" or "0". Eventually, other ACS algorithms can be added in
+# similar way.
+#
+# Automatic selection is currently only done through initialization, later on
+# we hope to do background checks to keep us moving to more ideal channels as
+# time goes by. ACS is currently only supported through the nl80211 driver and
+# your driver must have survey dump capability that is filled by the driver
+# during scanning.
+#
+# You can customize the ACS survey algorithm with the hostapd.conf variable
+# acs_num_scans.
+#
+# Supported ACS drivers:
+# * ath9k
+# * ath5k
+# * ath10k
+#
+# For more details refer to:
+# http://wireless.kernel.org/en/users/Documentation/acs
+#
+#CONFIG_ACS=y
Property changes on: trunk/net/hostapd/files/config
___________________________________________________________________
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Added: svn:mime-type
## -0,0 +1 ##
+text/plain
\ No newline at end of property
Added: trunk/net/hostapd/files/patch-crypto__openssl.c
===================================================================
--- trunk/net/hostapd/files/patch-crypto__openssl.c (rev 0)
+++ trunk/net/hostapd/files/patch-crypto__openssl.c 2017-10-19 11:59:14 UTC (rev 22949)
@@ -0,0 +1,20 @@
+--- src/crypto/crypto_openssl.c.orig 2017-04-21 20:53:34 UTC
++++ src/crypto/crypto_openssl.c
+@@ -611,7 +611,7 @@ void crypto_cipher_deinit(struct crypto_
+
+ void * dh5_init(struct wpabuf **priv, struct wpabuf **publ)
+ {
+-#if OPENSSL_VERSION_NUMBER < 0x10100000L
++#if OPENSSL_VERSION_NUMBER < 0x10100000L || defined (LIBRESSL_VERSION_NUMBER)
+ DH *dh;
+ struct wpabuf *pubkey = NULL, *privkey = NULL;
+ size_t publen, privlen;
+@@ -712,7 +712,7 @@ err:
+
+ void * dh5_init_fixed(const struct wpabuf *priv, const struct wpabuf *publ)
+ {
+-#if OPENSSL_VERSION_NUMBER < 0x10100000L
++#if OPENSSL_VERSION_NUMBER < 0x10100000L || defined(LIBRESSL_VERSION_NUMBER)
+ DH *dh;
+
+ dh = DH_new();
Property changes on: trunk/net/hostapd/files/patch-crypto__openssl.c
___________________________________________________________________
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Added: svn:mime-type
## -0,0 +1 ##
+text/plain
\ No newline at end of property
Added: trunk/net/hostapd/files/patch-src-l2_packet-l2_packet_freebsd.c
===================================================================
--- trunk/net/hostapd/files/patch-src-l2_packet-l2_packet_freebsd.c (rev 0)
+++ trunk/net/hostapd/files/patch-src-l2_packet-l2_packet_freebsd.c 2017-10-19 11:59:14 UTC (rev 22949)
@@ -0,0 +1,14 @@
+--- src/l2_packet/l2_packet_freebsd.c.orig 2014-06-04 13:26:14 UTC
++++ src/l2_packet/l2_packet_freebsd.c
+@@ -8,7 +8,10 @@
+ */
+
+ #include "includes.h"
+-#if defined(__APPLE__) || defined(__GLIBC__)
++#if defined(__FreeBSD__) \
++ || defined(__DragonFly__) \
++ || defined(__APPLE__) \
++ || defined(__GLIBC__)
+ #include <net/bpf.h>
+ #endif /* __APPLE__ */
+ #include <pcap.h>
Property changes on: trunk/net/hostapd/files/patch-src-l2_packet-l2_packet_freebsd.c
___________________________________________________________________
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Added: svn:mime-type
## -0,0 +1 ##
+text/plain
\ No newline at end of property
Added: trunk/net/hostapd/files/patch-src_drivers_driver__bsd.c
===================================================================
--- trunk/net/hostapd/files/patch-src_drivers_driver__bsd.c (rev 0)
+++ trunk/net/hostapd/files/patch-src_drivers_driver__bsd.c 2017-10-19 11:59:14 UTC (rev 22949)
@@ -0,0 +1,14 @@
+--- src/drivers/driver_bsd.c.orig 2015-09-27 19:02:05 UTC
++++ src/drivers/driver_bsd.c
+@@ -623,7 +623,11 @@ rtbuf_len(void)
+ static int bsd_sta_deauth(void *priv, const u8 *own_addr, const u8 *addr,
+ int reason_code);
+
++#ifdef __DragonFly__
++const char *
++#else
+ static const char *
++#endif
+ ether_sprintf(const u8 *addr)
+ {
+ static char buf[sizeof(MACSTR)];
Property changes on: trunk/net/hostapd/files/patch-src_drivers_driver__bsd.c
___________________________________________________________________
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Added: svn:mime-type
## -0,0 +1 ##
+text/plain
\ No newline at end of property
Added: trunk/net/hostapd/files/patch-src_utils_os.h
===================================================================
--- trunk/net/hostapd/files/patch-src_utils_os.h (rev 0)
+++ trunk/net/hostapd/files/patch-src_utils_os.h 2017-10-19 11:59:14 UTC (rev 22949)
@@ -0,0 +1,17 @@
+--- src/utils/os.h.orig 2016-09-17 20:36:13 UTC
++++ src/utils/os.h
+@@ -246,12 +246,14 @@ char * os_readfile(const char *name, siz
+ */
+ int os_file_exists(const char *fname);
+
++#if !defined __FreeBSD__ && !defined __DragonFly__
+ /**
+ * os_fdatasync - Sync a file's (for a given stream) state with storage device
+ * @stream: the stream to be flushed
+ * Returns: 0 if the operation succeeded or -1 on failure
+ */
+ int os_fdatasync(FILE *stream);
++#endif
+
+ /**
+ * os_zalloc - Allocate and zero memory
Property changes on: trunk/net/hostapd/files/patch-src_utils_os.h
___________________________________________________________________
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Added: svn:mime-type
## -0,0 +1 ##
+text/plain
\ No newline at end of property
Added: trunk/net/hostapd/files/patch-src_utils_os__unix.c
===================================================================
--- trunk/net/hostapd/files/patch-src_utils_os__unix.c (rev 0)
+++ trunk/net/hostapd/files/patch-src_utils_os__unix.c 2017-10-19 11:59:14 UTC (rev 22949)
@@ -0,0 +1,18 @@
+--- src/utils/os_unix.c.orig 2015-09-27 19:02:05 UTC
++++ src/utils/os_unix.c
+@@ -442,6 +442,7 @@ int os_file_exists(const char *fname)
+ }
+
+
++#if !defined __FreeBSD__ && !defined __DragonFly__
+ int os_fdatasync(FILE *stream)
+ {
+ if (!fflush(stream)) {
+@@ -459,6 +460,7 @@ int os_fdatasync(FILE *stream)
+
+ return -1;
+ }
++#endif
+
+
+ #ifndef WPA_TRACE
Property changes on: trunk/net/hostapd/files/patch-src_utils_os__unix.c
___________________________________________________________________
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Added: svn:mime-type
## -0,0 +1 ##
+text/plain
\ No newline at end of property
Added: trunk/net/hostapd/files/patch-src_wps_wps__upnp.c
===================================================================
--- trunk/net/hostapd/files/patch-src_wps_wps__upnp.c (rev 0)
+++ trunk/net/hostapd/files/patch-src_wps_wps__upnp.c 2017-10-19 11:59:14 UTC (rev 22949)
@@ -0,0 +1,20 @@
+--- src/wps/wps_upnp.c.orig 2015-03-15 17:30:39 UTC
++++ src/wps/wps_upnp.c
+@@ -837,7 +837,7 @@ fail:
+ }
+
+
+-#if defined(__FreeBSD__) || defined(__FreeBSD_kernel__)
++#if defined(__FreeBSD__) || defined(__FreeBSD_kernel__) || defined(__DragonFly__)
+ #include <sys/sysctl.h>
+ #include <net/route.h>
+ #include <net/if_dl.h>
+@@ -924,7 +924,7 @@ int get_netif_info(const char *net_if, u
+ goto fail;
+ }
+ os_memcpy(mac, req.ifr_addr.sa_data, 6);
+-#elif defined(__FreeBSD__) || defined(__FreeBSD_kernel__)
++#elif defined(__FreeBSD__) || defined(__FreeBSD_kernel__) || defined(__DragonFly__)
+ if (eth_get(net_if, mac) < 0) {
+ wpa_printf(MSG_ERROR, "WPS UPnP: Failed to get MAC address");
+ goto fail;
Property changes on: trunk/net/hostapd/files/patch-src_wps_wps__upnp.c
___________________________________________________________________
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Added: svn:mime-type
## -0,0 +1 ##
+text/plain
\ No newline at end of property
Added: trunk/net/hostapd/pkg-descr
===================================================================
--- trunk/net/hostapd/pkg-descr (rev 0)
+++ trunk/net/hostapd/pkg-descr 2017-10-19 11:59:14 UTC (rev 22949)
@@ -0,0 +1,13 @@
+hostapd is a user space daemon for access point and authentication
+servers. It implements IEEE 802.11 access point management, IEEE
+802.1X/WPA/WPA2/EAP Authenticators, RADIUS client, EAP server, and
+RADIUS authentication server. The current version supports Linux
+(Host AP, madwifi, mac80211-based drivers) and FreeBSD (net80211).
+
+To use the ports version instead of the base, add:
+
+ hostapd_program="/usr/local/sbin/hostapd"
+
+to /etc/rc.conf
+
+WWW: http://w1.fi/hostapd/
Property changes on: trunk/net/hostapd/pkg-descr
___________________________________________________________________
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Added: svn:mime-type
## -0,0 +1 ##
+text/plain
\ No newline at end of property
More information about the Midnightbsd-cvs
mailing list