[Midnightbsd-cvs] src [11164] vendor/openbsm/1.2_alpha4: tag version
laffer1 at midnightbsd.org
laffer1 at midnightbsd.org
Wed Jun 27 18:39:40 EDT 2018
Revision: 11164
http://svnweb.midnightbsd.org/src/?rev=11164
Author: laffer1
Date: 2018-06-27 18:39:39 -0400 (Wed, 27 Jun 2018)
Log Message:
-----------
tag version
Added Paths:
-----------
vendor/openbsm/1.2_alpha4/
vendor/openbsm/1.2_alpha4/.travis.yml
vendor/openbsm/1.2_alpha4/CREDITS
vendor/openbsm/1.2_alpha4/FREEBSD-upgrade
vendor/openbsm/1.2_alpha4/INSTALL
vendor/openbsm/1.2_alpha4/LICENSE
vendor/openbsm/1.2_alpha4/Makefile.am
vendor/openbsm/1.2_alpha4/Makefile.in
vendor/openbsm/1.2_alpha4/NEWS
vendor/openbsm/1.2_alpha4/README
vendor/openbsm/1.2_alpha4/TODO
vendor/openbsm/1.2_alpha4/VERSION
vendor/openbsm/1.2_alpha4/aclocal.m4
vendor/openbsm/1.2_alpha4/autogen.sh
vendor/openbsm/1.2_alpha4/bin/Makefile.am
vendor/openbsm/1.2_alpha4/bin/Makefile.in
vendor/openbsm/1.2_alpha4/bin/audit/Makefile.am
vendor/openbsm/1.2_alpha4/bin/audit/Makefile.in
vendor/openbsm/1.2_alpha4/bin/audit/audit.8
vendor/openbsm/1.2_alpha4/bin/audit/audit.c
vendor/openbsm/1.2_alpha4/bin/auditd/Makefile.am
vendor/openbsm/1.2_alpha4/bin/auditd/Makefile.in
vendor/openbsm/1.2_alpha4/bin/auditd/audit_triggers.defs
vendor/openbsm/1.2_alpha4/bin/auditd/audit_warn.c
vendor/openbsm/1.2_alpha4/bin/auditd/auditd.8
vendor/openbsm/1.2_alpha4/bin/auditd/auditd.c
vendor/openbsm/1.2_alpha4/bin/auditd/auditd.h
vendor/openbsm/1.2_alpha4/bin/auditd/auditd_control.defs
vendor/openbsm/1.2_alpha4/bin/auditd/auditd_darwin.c
vendor/openbsm/1.2_alpha4/bin/auditd/auditd_fbsd.c
vendor/openbsm/1.2_alpha4/bin/auditdistd/
vendor/openbsm/1.2_alpha4/bin/auditfilterd/Makefile.am
vendor/openbsm/1.2_alpha4/bin/auditfilterd/Makefile.in
vendor/openbsm/1.2_alpha4/bin/auditfilterd/auditfilterd.8
vendor/openbsm/1.2_alpha4/bin/auditfilterd/auditfilterd.c
vendor/openbsm/1.2_alpha4/bin/auditfilterd/auditfilterd.h
vendor/openbsm/1.2_alpha4/bin/auditfilterd/auditfilterd_conf.c
vendor/openbsm/1.2_alpha4/bin/auditreduce/Makefile.am
vendor/openbsm/1.2_alpha4/bin/auditreduce/Makefile.in
vendor/openbsm/1.2_alpha4/bin/auditreduce/auditreduce.1
vendor/openbsm/1.2_alpha4/bin/auditreduce/auditreduce.c
vendor/openbsm/1.2_alpha4/bin/auditreduce/auditreduce.h
vendor/openbsm/1.2_alpha4/bin/praudit/Makefile.am
vendor/openbsm/1.2_alpha4/bin/praudit/Makefile.in
vendor/openbsm/1.2_alpha4/bin/praudit/praudit.1
vendor/openbsm/1.2_alpha4/bin/praudit/praudit.c
vendor/openbsm/1.2_alpha4/bsm/Makefile.am
vendor/openbsm/1.2_alpha4/bsm/Makefile.in
vendor/openbsm/1.2_alpha4/bsm/audit_filter.h
vendor/openbsm/1.2_alpha4/bsm/audit_uevents.h
vendor/openbsm/1.2_alpha4/bsm/auditd_lib.h
vendor/openbsm/1.2_alpha4/bsm/libbsm.h
vendor/openbsm/1.2_alpha4/compat/clock_gettime.h
vendor/openbsm/1.2_alpha4/compat/closefrom.h
vendor/openbsm/1.2_alpha4/compat/compat.h
vendor/openbsm/1.2_alpha4/compat/endian.h
vendor/openbsm/1.2_alpha4/compat/endian_enc.h
vendor/openbsm/1.2_alpha4/compat/flopen.h
vendor/openbsm/1.2_alpha4/compat/pidfile.h
vendor/openbsm/1.2_alpha4/compat/queue.h
vendor/openbsm/1.2_alpha4/compat/strlcat.h
vendor/openbsm/1.2_alpha4/compat/strlcpy.h
vendor/openbsm/1.2_alpha4/compat/vis.h
vendor/openbsm/1.2_alpha4/config/config.h
vendor/openbsm/1.2_alpha4/config/config.h.in
vendor/openbsm/1.2_alpha4/config/ltmain.sh
vendor/openbsm/1.2_alpha4/config/ylwrap
vendor/openbsm/1.2_alpha4/configure
vendor/openbsm/1.2_alpha4/configure.ac
vendor/openbsm/1.2_alpha4/etc/audit_class
vendor/openbsm/1.2_alpha4/etc/audit_control
vendor/openbsm/1.2_alpha4/etc/audit_event
vendor/openbsm/1.2_alpha4/etc/audit_filter
vendor/openbsm/1.2_alpha4/etc/audit_user
vendor/openbsm/1.2_alpha4/etc/audit_warn
vendor/openbsm/1.2_alpha4/libauditd/
vendor/openbsm/1.2_alpha4/libbsm/Makefile.am
vendor/openbsm/1.2_alpha4/libbsm/Makefile.in
vendor/openbsm/1.2_alpha4/libbsm/au_class.3
vendor/openbsm/1.2_alpha4/libbsm/au_control.3
vendor/openbsm/1.2_alpha4/libbsm/au_domain.3
vendor/openbsm/1.2_alpha4/libbsm/au_errno.3
vendor/openbsm/1.2_alpha4/libbsm/au_event.3
vendor/openbsm/1.2_alpha4/libbsm/au_fcntl_cmd.3
vendor/openbsm/1.2_alpha4/libbsm/au_free_token.3
vendor/openbsm/1.2_alpha4/libbsm/au_io.3
vendor/openbsm/1.2_alpha4/libbsm/au_mask.3
vendor/openbsm/1.2_alpha4/libbsm/au_notify.3
vendor/openbsm/1.2_alpha4/libbsm/au_open.3
vendor/openbsm/1.2_alpha4/libbsm/au_socket_type.3
vendor/openbsm/1.2_alpha4/libbsm/au_token.3
vendor/openbsm/1.2_alpha4/libbsm/au_user.3
vendor/openbsm/1.2_alpha4/libbsm/audit_submit.3
vendor/openbsm/1.2_alpha4/libbsm/bsm_audit.c
vendor/openbsm/1.2_alpha4/libbsm/bsm_class.c
vendor/openbsm/1.2_alpha4/libbsm/bsm_control.c
vendor/openbsm/1.2_alpha4/libbsm/bsm_domain.c
vendor/openbsm/1.2_alpha4/libbsm/bsm_errno.c
vendor/openbsm/1.2_alpha4/libbsm/bsm_event.c
vendor/openbsm/1.2_alpha4/libbsm/bsm_fcntl.c
vendor/openbsm/1.2_alpha4/libbsm/bsm_flags.c
vendor/openbsm/1.2_alpha4/libbsm/bsm_io.c
vendor/openbsm/1.2_alpha4/libbsm/bsm_mask.c
vendor/openbsm/1.2_alpha4/libbsm/bsm_notify.c
vendor/openbsm/1.2_alpha4/libbsm/bsm_socket_type.c
vendor/openbsm/1.2_alpha4/libbsm/bsm_token.c
vendor/openbsm/1.2_alpha4/libbsm/bsm_user.c
vendor/openbsm/1.2_alpha4/libbsm/bsm_wrappers.c
vendor/openbsm/1.2_alpha4/libbsm/libbsm.3
vendor/openbsm/1.2_alpha4/m4/
vendor/openbsm/1.2_alpha4/man/Makefile.am
vendor/openbsm/1.2_alpha4/man/Makefile.in
vendor/openbsm/1.2_alpha4/man/audit.2
vendor/openbsm/1.2_alpha4/man/audit.log.5
vendor/openbsm/1.2_alpha4/man/audit_class.5
vendor/openbsm/1.2_alpha4/man/audit_control.5
vendor/openbsm/1.2_alpha4/man/audit_event.5
vendor/openbsm/1.2_alpha4/man/audit_user.5
vendor/openbsm/1.2_alpha4/man/audit_warn.5
vendor/openbsm/1.2_alpha4/man/auditctl.2
vendor/openbsm/1.2_alpha4/man/auditon.2
vendor/openbsm/1.2_alpha4/man/getaudit.2
vendor/openbsm/1.2_alpha4/man/getauid.2
vendor/openbsm/1.2_alpha4/man/setaudit.2
vendor/openbsm/1.2_alpha4/man/setauid.2
vendor/openbsm/1.2_alpha4/modules/Makefile.am
vendor/openbsm/1.2_alpha4/modules/Makefile.in
vendor/openbsm/1.2_alpha4/modules/auditfilter_noop/Makefile.am
vendor/openbsm/1.2_alpha4/modules/auditfilter_noop/Makefile.in
vendor/openbsm/1.2_alpha4/modules/auditfilter_noop/auditfilter_noop.c
vendor/openbsm/1.2_alpha4/sys/
vendor/openbsm/1.2_alpha4/test/Makefile.am
vendor/openbsm/1.2_alpha4/test/Makefile.in
vendor/openbsm/1.2_alpha4/test/bsm/Makefile.am
vendor/openbsm/1.2_alpha4/test/bsm/Makefile.in
vendor/openbsm/1.2_alpha4/test/bsm/generate.c
vendor/openbsm/1.2_alpha4/test/reference/E2BIG_record
vendor/openbsm/1.2_alpha4/test/reference/EACCES_record
vendor/openbsm/1.2_alpha4/test/reference/EBADF_record
vendor/openbsm/1.2_alpha4/test/reference/EBUSY_record
vendor/openbsm/1.2_alpha4/test/reference/ECHILD_record
vendor/openbsm/1.2_alpha4/test/reference/EDEADLK_record
vendor/openbsm/1.2_alpha4/test/reference/EEXIST_record
vendor/openbsm/1.2_alpha4/test/reference/EFAULT_record
vendor/openbsm/1.2_alpha4/test/reference/EFBIG_record
vendor/openbsm/1.2_alpha4/test/reference/EINTR_record
vendor/openbsm/1.2_alpha4/test/reference/EINVAL_record
vendor/openbsm/1.2_alpha4/test/reference/EIO_record
vendor/openbsm/1.2_alpha4/test/reference/EISDIR_record
vendor/openbsm/1.2_alpha4/test/reference/EMFILE_record
vendor/openbsm/1.2_alpha4/test/reference/EMLINK_record
vendor/openbsm/1.2_alpha4/test/reference/ENFILE_record
vendor/openbsm/1.2_alpha4/test/reference/ENODEV_record
vendor/openbsm/1.2_alpha4/test/reference/ENOENT_record
vendor/openbsm/1.2_alpha4/test/reference/ENOEXEC_record
vendor/openbsm/1.2_alpha4/test/reference/ENOMEM_record
vendor/openbsm/1.2_alpha4/test/reference/ENOSPC_record
vendor/openbsm/1.2_alpha4/test/reference/ENOTBLK_record
vendor/openbsm/1.2_alpha4/test/reference/ENOTDIR_record
vendor/openbsm/1.2_alpha4/test/reference/ENOTTY_record
vendor/openbsm/1.2_alpha4/test/reference/ENXIO_record
vendor/openbsm/1.2_alpha4/test/reference/EPERM_record
vendor/openbsm/1.2_alpha4/test/reference/EPIPE_record
vendor/openbsm/1.2_alpha4/test/reference/EROFS_record
vendor/openbsm/1.2_alpha4/test/reference/ESPIPE_record
vendor/openbsm/1.2_alpha4/test/reference/ESRCH_record
vendor/openbsm/1.2_alpha4/test/reference/ETXTBSY_record
vendor/openbsm/1.2_alpha4/test/reference/EXDEV_record
vendor/openbsm/1.2_alpha4/test/reference/arg32_record
vendor/openbsm/1.2_alpha4/test/reference/arg32_token
vendor/openbsm/1.2_alpha4/test/reference/data_record
vendor/openbsm/1.2_alpha4/test/reference/data_token
vendor/openbsm/1.2_alpha4/test/reference/file_record
vendor/openbsm/1.2_alpha4/test/reference/file_token
vendor/openbsm/1.2_alpha4/test/reference/header32_token
vendor/openbsm/1.2_alpha4/test/reference/in_addr_record
vendor/openbsm/1.2_alpha4/test/reference/in_addr_token
vendor/openbsm/1.2_alpha4/test/reference/ip_record
vendor/openbsm/1.2_alpha4/test/reference/ip_token
vendor/openbsm/1.2_alpha4/test/reference/ipc_record
vendor/openbsm/1.2_alpha4/test/reference/ipc_token
vendor/openbsm/1.2_alpha4/test/reference/iport_record
vendor/openbsm/1.2_alpha4/test/reference/iport_token
vendor/openbsm/1.2_alpha4/test/reference/opaque_record
vendor/openbsm/1.2_alpha4/test/reference/opaque_token
vendor/openbsm/1.2_alpha4/test/reference/path_record
vendor/openbsm/1.2_alpha4/test/reference/path_token
vendor/openbsm/1.2_alpha4/test/reference/process32_record
vendor/openbsm/1.2_alpha4/test/reference/process32_token
vendor/openbsm/1.2_alpha4/test/reference/process32ex_record-IPv4
vendor/openbsm/1.2_alpha4/test/reference/process32ex_record-IPv6
vendor/openbsm/1.2_alpha4/test/reference/process32ex_token-IPv4
vendor/openbsm/1.2_alpha4/test/reference/process32ex_token-IPv6
vendor/openbsm/1.2_alpha4/test/reference/process64_record
vendor/openbsm/1.2_alpha4/test/reference/process64_token
vendor/openbsm/1.2_alpha4/test/reference/process64ex_record-IPv4
vendor/openbsm/1.2_alpha4/test/reference/process64ex_record-IPv6
vendor/openbsm/1.2_alpha4/test/reference/process64ex_token-IPv4
vendor/openbsm/1.2_alpha4/test/reference/process64ex_token-IPv6
vendor/openbsm/1.2_alpha4/test/reference/return32_record
vendor/openbsm/1.2_alpha4/test/reference/return32_token
vendor/openbsm/1.2_alpha4/test/reference/seq_record
vendor/openbsm/1.2_alpha4/test/reference/seq_token
vendor/openbsm/1.2_alpha4/test/reference/socketex_record
vendor/openbsm/1.2_alpha4/test/reference/socketex_token
vendor/openbsm/1.2_alpha4/test/reference/subject32_record
vendor/openbsm/1.2_alpha4/test/reference/subject32_token
vendor/openbsm/1.2_alpha4/test/reference/subject32ex_record
vendor/openbsm/1.2_alpha4/test/reference/subject32ex_token-IPv4
vendor/openbsm/1.2_alpha4/test/reference/subject32ex_token-IPv6
vendor/openbsm/1.2_alpha4/test/reference/text_record
vendor/openbsm/1.2_alpha4/test/reference/text_token
vendor/openbsm/1.2_alpha4/test/reference/trailer_token
vendor/openbsm/1.2_alpha4/test/reference/zonename_record
vendor/openbsm/1.2_alpha4/test/reference/zonename_token
vendor/openbsm/1.2_alpha4/tools/Makefile.am
vendor/openbsm/1.2_alpha4/tools/Makefile.in
vendor/openbsm/1.2_alpha4/tools/audump.c
Removed Paths:
-------------
vendor/openbsm/1.2_alpha4/HISTORY
vendor/openbsm/1.2_alpha4/LICENSE
vendor/openbsm/1.2_alpha4/Makefile.am
vendor/openbsm/1.2_alpha4/Makefile.in
vendor/openbsm/1.2_alpha4/README
vendor/openbsm/1.2_alpha4/TODO
vendor/openbsm/1.2_alpha4/VERSION
vendor/openbsm/1.2_alpha4/aclocal.m4
vendor/openbsm/1.2_alpha4/autogen.sh
vendor/openbsm/1.2_alpha4/bin/Makefile.am
vendor/openbsm/1.2_alpha4/bin/Makefile.in
vendor/openbsm/1.2_alpha4/bin/audit/Makefile.am
vendor/openbsm/1.2_alpha4/bin/audit/Makefile.in
vendor/openbsm/1.2_alpha4/bin/audit/audit.8
vendor/openbsm/1.2_alpha4/bin/audit/audit.c
vendor/openbsm/1.2_alpha4/bin/auditd/Makefile.am
vendor/openbsm/1.2_alpha4/bin/auditd/Makefile.in
vendor/openbsm/1.2_alpha4/bin/auditd/audit_warn.c
vendor/openbsm/1.2_alpha4/bin/auditd/auditd.8
vendor/openbsm/1.2_alpha4/bin/auditd/auditd.c
vendor/openbsm/1.2_alpha4/bin/auditd/auditd.h
vendor/openbsm/1.2_alpha4/bin/auditfilterd/Makefile.am
vendor/openbsm/1.2_alpha4/bin/auditfilterd/Makefile.in
vendor/openbsm/1.2_alpha4/bin/auditfilterd/auditfilterd.8
vendor/openbsm/1.2_alpha4/bin/auditfilterd/auditfilterd.c
vendor/openbsm/1.2_alpha4/bin/auditfilterd/auditfilterd.h
vendor/openbsm/1.2_alpha4/bin/auditfilterd/auditfilterd_conf.c
vendor/openbsm/1.2_alpha4/bin/auditreduce/Makefile.am
vendor/openbsm/1.2_alpha4/bin/auditreduce/Makefile.in
vendor/openbsm/1.2_alpha4/bin/auditreduce/auditreduce.1
vendor/openbsm/1.2_alpha4/bin/auditreduce/auditreduce.c
vendor/openbsm/1.2_alpha4/bin/auditreduce/auditreduce.h
vendor/openbsm/1.2_alpha4/bin/praudit/Makefile.am
vendor/openbsm/1.2_alpha4/bin/praudit/Makefile.in
vendor/openbsm/1.2_alpha4/bin/praudit/praudit.1
vendor/openbsm/1.2_alpha4/bin/praudit/praudit.c
vendor/openbsm/1.2_alpha4/bsm/Makefile.am
vendor/openbsm/1.2_alpha4/bsm/Makefile.in
vendor/openbsm/1.2_alpha4/bsm/audit_filter.h
vendor/openbsm/1.2_alpha4/bsm/audit_uevents.h
vendor/openbsm/1.2_alpha4/bsm/libbsm.h
vendor/openbsm/1.2_alpha4/compat/clock_gettime.h
vendor/openbsm/1.2_alpha4/compat/endian.h
vendor/openbsm/1.2_alpha4/compat/queue.h
vendor/openbsm/1.2_alpha4/compat/strlcat.h
vendor/openbsm/1.2_alpha4/config/config.h
vendor/openbsm/1.2_alpha4/config/config.h.in
vendor/openbsm/1.2_alpha4/config/ltmain.sh
vendor/openbsm/1.2_alpha4/configure
vendor/openbsm/1.2_alpha4/configure.ac
vendor/openbsm/1.2_alpha4/etc/audit_class
vendor/openbsm/1.2_alpha4/etc/audit_control
vendor/openbsm/1.2_alpha4/etc/audit_event
vendor/openbsm/1.2_alpha4/etc/audit_filter
vendor/openbsm/1.2_alpha4/etc/audit_user
vendor/openbsm/1.2_alpha4/etc/audit_warn
vendor/openbsm/1.2_alpha4/libbsm/Makefile.am
vendor/openbsm/1.2_alpha4/libbsm/Makefile.in
vendor/openbsm/1.2_alpha4/libbsm/au_class.3
vendor/openbsm/1.2_alpha4/libbsm/au_control.3
vendor/openbsm/1.2_alpha4/libbsm/au_event.3
vendor/openbsm/1.2_alpha4/libbsm/au_free_token.3
vendor/openbsm/1.2_alpha4/libbsm/au_io.3
vendor/openbsm/1.2_alpha4/libbsm/au_mask.3
vendor/openbsm/1.2_alpha4/libbsm/au_open.3
vendor/openbsm/1.2_alpha4/libbsm/au_token.3
vendor/openbsm/1.2_alpha4/libbsm/au_user.3
vendor/openbsm/1.2_alpha4/libbsm/audit_submit.3
vendor/openbsm/1.2_alpha4/libbsm/bsm_audit.c
vendor/openbsm/1.2_alpha4/libbsm/bsm_class.c
vendor/openbsm/1.2_alpha4/libbsm/bsm_control.c
vendor/openbsm/1.2_alpha4/libbsm/bsm_event.c
vendor/openbsm/1.2_alpha4/libbsm/bsm_flags.c
vendor/openbsm/1.2_alpha4/libbsm/bsm_io.c
vendor/openbsm/1.2_alpha4/libbsm/bsm_mask.c
vendor/openbsm/1.2_alpha4/libbsm/bsm_notify.c
vendor/openbsm/1.2_alpha4/libbsm/bsm_token.c
vendor/openbsm/1.2_alpha4/libbsm/bsm_user.c
vendor/openbsm/1.2_alpha4/libbsm/bsm_wrappers.c
vendor/openbsm/1.2_alpha4/libbsm/libbsm.3
vendor/openbsm/1.2_alpha4/man/Makefile.am
vendor/openbsm/1.2_alpha4/man/Makefile.in
vendor/openbsm/1.2_alpha4/man/audit.2
vendor/openbsm/1.2_alpha4/man/audit.log.5
vendor/openbsm/1.2_alpha4/man/audit_class.5
vendor/openbsm/1.2_alpha4/man/audit_control.5
vendor/openbsm/1.2_alpha4/man/audit_event.5
vendor/openbsm/1.2_alpha4/man/audit_user.5
vendor/openbsm/1.2_alpha4/man/audit_warn.5
vendor/openbsm/1.2_alpha4/man/auditctl.2
vendor/openbsm/1.2_alpha4/man/auditon.2
vendor/openbsm/1.2_alpha4/man/getaudit.2
vendor/openbsm/1.2_alpha4/man/getauid.2
vendor/openbsm/1.2_alpha4/man/setaudit.2
vendor/openbsm/1.2_alpha4/man/setauid.2
vendor/openbsm/1.2_alpha4/modules/Makefile.am
vendor/openbsm/1.2_alpha4/modules/Makefile.in
vendor/openbsm/1.2_alpha4/modules/auditfilter_noop/Makefile.am
vendor/openbsm/1.2_alpha4/modules/auditfilter_noop/Makefile.in
vendor/openbsm/1.2_alpha4/modules/auditfilter_noop/auditfilter_noop.c
vendor/openbsm/1.2_alpha4/test/Makefile.am
vendor/openbsm/1.2_alpha4/test/Makefile.in
vendor/openbsm/1.2_alpha4/test/bsm/Makefile.am
vendor/openbsm/1.2_alpha4/test/bsm/Makefile.in
vendor/openbsm/1.2_alpha4/test/bsm/generate.c
vendor/openbsm/1.2_alpha4/test/reference/arg32_record
vendor/openbsm/1.2_alpha4/test/reference/arg32_token
vendor/openbsm/1.2_alpha4/test/reference/data_record
vendor/openbsm/1.2_alpha4/test/reference/data_token
vendor/openbsm/1.2_alpha4/test/reference/file_record
vendor/openbsm/1.2_alpha4/test/reference/file_token
vendor/openbsm/1.2_alpha4/test/reference/header32_token
vendor/openbsm/1.2_alpha4/test/reference/in_addr_record
vendor/openbsm/1.2_alpha4/test/reference/in_addr_token
vendor/openbsm/1.2_alpha4/test/reference/ip_record
vendor/openbsm/1.2_alpha4/test/reference/ip_token
vendor/openbsm/1.2_alpha4/test/reference/ipc_record
vendor/openbsm/1.2_alpha4/test/reference/ipc_token
vendor/openbsm/1.2_alpha4/test/reference/iport_record
vendor/openbsm/1.2_alpha4/test/reference/iport_token
vendor/openbsm/1.2_alpha4/test/reference/opaque_record
vendor/openbsm/1.2_alpha4/test/reference/opaque_token
vendor/openbsm/1.2_alpha4/test/reference/path_record
vendor/openbsm/1.2_alpha4/test/reference/path_token
vendor/openbsm/1.2_alpha4/test/reference/process32_record
vendor/openbsm/1.2_alpha4/test/reference/process32_token
vendor/openbsm/1.2_alpha4/test/reference/process32ex_record-IPv4
vendor/openbsm/1.2_alpha4/test/reference/process32ex_record-IPv6
vendor/openbsm/1.2_alpha4/test/reference/process32ex_token-IPv4
vendor/openbsm/1.2_alpha4/test/reference/process32ex_token-IPv6
vendor/openbsm/1.2_alpha4/test/reference/process64_record
vendor/openbsm/1.2_alpha4/test/reference/process64_token
vendor/openbsm/1.2_alpha4/test/reference/process64ex_record-IPv4
vendor/openbsm/1.2_alpha4/test/reference/process64ex_record-IPv6
vendor/openbsm/1.2_alpha4/test/reference/process64ex_token-IPv4
vendor/openbsm/1.2_alpha4/test/reference/process64ex_token-IPv6
vendor/openbsm/1.2_alpha4/test/reference/return32_record
vendor/openbsm/1.2_alpha4/test/reference/return32_token
vendor/openbsm/1.2_alpha4/test/reference/seq_record
vendor/openbsm/1.2_alpha4/test/reference/seq_token
vendor/openbsm/1.2_alpha4/test/reference/subject32_record
vendor/openbsm/1.2_alpha4/test/reference/subject32_token
vendor/openbsm/1.2_alpha4/test/reference/subject32ex_record
vendor/openbsm/1.2_alpha4/test/reference/subject32ex_token-IPv4
vendor/openbsm/1.2_alpha4/test/reference/subject32ex_token-IPv6
vendor/openbsm/1.2_alpha4/test/reference/text_record
vendor/openbsm/1.2_alpha4/test/reference/text_token
vendor/openbsm/1.2_alpha4/test/reference/trailer_token
vendor/openbsm/1.2_alpha4/test/reference/zonename_record
vendor/openbsm/1.2_alpha4/test/reference/zonename_token
vendor/openbsm/1.2_alpha4/tools/Makefile.am
vendor/openbsm/1.2_alpha4/tools/Makefile.in
vendor/openbsm/1.2_alpha4/tools/audump.c
Copied: vendor/openbsm/1.2_alpha4/.travis.yml (from rev 11163, vendor/openbsm/dist/.travis.yml)
===================================================================
--- vendor/openbsm/1.2_alpha4/.travis.yml (rev 0)
+++ vendor/openbsm/1.2_alpha4/.travis.yml 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,18 @@
+language: c
+
+compiler:
+ - clang
+ - gcc
+
+os:
+ - linux
+ - osx
+
+before_install:
+ - if [ $TRAVIS_OS_NAME == "linux" ]; then
+ sudo apt-get -qq update;
+ sudo apt-get -qq install byacc flex;
+ elif [ $TRAVIS_OS_NAME == "osx" ]; then
+ brew update;
+ brew install byacc flex;
+ fi
Copied: vendor/openbsm/1.2_alpha4/CREDITS (from rev 11163, vendor/openbsm/dist/CREDITS)
===================================================================
--- vendor/openbsm/1.2_alpha4/CREDITS (rev 0)
+++ vendor/openbsm/1.2_alpha4/CREDITS 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,41 @@
+OpenBSM Credits
+
+The following organizations and individuals have contributed substantially to
+the development of OpenBSM:
+
+ Apple Inc.
+ McAfee Research, McAfee, Inc.
+ SPARTA, Inc.
+ Robert Watson
+ Wayne Salamon
+ Suresh Krishnaswamy
+ Kevin Van Vechten
+ Tom Rhodes
+ Wojciech Koszek
+ Chunyang Yuan
+ Poul-Henning Kamp
+ Christian Brueffer
+ Olivier Houchard
+ Christian Peron
+ Martin Fong
+ Pawel Worach
+ Martin Englund
+ Ruslan Ermilov
+ Martin Voros
+ Diego Giagio
+ Alex Samorukov
+ Eric Hall
+ Xin LI
+ Stacey Son
+ Todd Heberlein
+ Gary Hoo
+ Dave Bertouille
+ Jonathan Anderson
+ Pawel Jakub Dawidek
+ Joel Dahl
+ Ryan Steinmetz
+ The FreeBSD Foundation
+
+In addition, Coverity, Inc.'s Prevent(tm) static analysis tool and Gimpel
+Software's FlexeLint tool were used to identify a number of bugs in the
+OpenBSM implementation.
Copied: vendor/openbsm/1.2_alpha4/FREEBSD-upgrade (from rev 11163, vendor/openbsm/dist/FREEBSD-upgrade)
===================================================================
--- vendor/openbsm/1.2_alpha4/FREEBSD-upgrade (rev 0)
+++ vendor/openbsm/1.2_alpha4/FREEBSD-upgrade 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,56 @@
+Upgrade Instructions for OpenBSM
+--------------------------------
+
+OpenBSM integrates into the FreeBSD source tree in several places:
+
+src/contrib/openbsm The OpenBSM distribution itself
+src/sys/bsm Modified versions of some bsm/ include files
+src/sys/security/audit Kernel audit framework, some OpenBSM-based files
+src/usr.sbin/*audit* Makefiles for various OpenBSM tools
+src/etc/Makefile Installation of /etc OpenBSM files
+src/lib/libbsm/* Build for OpenBSM library
+
+OpenBSM is normally built using an integrated autoconf/automake build
+system. For the purposes of tight integration with FreeBSD, we use an
+adapted BSD make (bmake) build system loosely based on the automake
+setup. We also rely on a static config.h generated when OpenBSM is
+imported, rather than re-configuring every build. This leads to a
+more reproduceable build environment, and avoids dependence on things
+not in the base tree (i.e., autoconf, automake, GNU make, etc). An
+upgrade of OpenBSM generally involves the following steps:
+
+- Vendor import of OpenBSM into src/contrib.
+- Run configure, commit src/contrib/openbsm/config/config.h.
+- Replication of src/contrib/openbsm/bsm changes into src/sys/bsm.
+- Possible updates to src/sys/security/audit, especially relating to
+ audit_bsm_token.c.
+- Update any library, tool, or etc BSD Makefiles to add new files,
+ defines, or other generally useful or necessary things.
+
+Certain files are present only in the vendor branch, and not in FreeBSD
+development branches:
+
+ contrib/openbsm/bsm audit.h audit_internal.h audit_kevents.h
+ audit_record.h
+
+This prevents confusion regarding whether the src/sys/bsm or contrib
+versions of the include files should be used in the build. Normally, the
+CVS vendor import goes along the following lines:
+
+ cd ~/p4/projects/trustedbsd/openbsm
+ cvs -n -d rwatson at repoman.FreeBSD.org:/home/ncvs -q import \
+ src/contrib/openbsm TrustedBSD OPENBSM_1_0_ALPHA_1
+
+Replacing the version string as required. Remove the "-n" argument once
+the import is tested in order to perform the actual import.
+
+Propagation of changes to src/sys/{bsm,security/audit} is something that
+requires careful coordination and attention to detail. These files are
+not on CVS vendor branches, but do have the same local vs. vendor merge
+issues. Remember that contrib/openbsm (and the rest of the system) will
+be built with the version of the bsm/ include files in src/sys/bsm, not
+the version in contrib/openbsm/bsm, so buildworld tests before committing
+are necessary, and the commits to various parts of the system must be
+made in close succession.
+
+$FreeBSD: stable/10/contrib/openbsm/FREEBSD-upgrade 161866 2006-09-02 09:56:28Z rwatson $
Deleted: vendor/openbsm/1.2_alpha4/HISTORY
===================================================================
--- vendor/openbsm/dist/HISTORY 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/HISTORY 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,305 +0,0 @@
-OpenBSM 1.0
-
-- Fix bug in auditreduce(8) which resulted in a memory fault/crash when
- the user specified an event name with -m.
-- Remove AU_.* hard-coded audit class constants, as udit classes are now
- entirely dynamically configured using /etc/security/audit_class.
-
-OpenBSM 1.0 alpha 15
-
-- Fix bug when processing in_addr_ex tokens.
-- Restore the behavior of printing the string/text specified while
- auditing arg32 tokens.
-- Synchronized audit event list to Solaris, picking up the *at(2) system call
- definitions, now required for FreeBSD and Linux. Added additional events
- for *at(2) system calls not present in Solaris.
-- Bugs in auditreduce(8) fixed allowing partial date strings to be used in
- filtering events.
-
-OpenBSM 1.0 alpha 14
-
-- Fix endian issues when processing IPv6 addresses for extended subject
- and process tokens.
-- gcc41 warnings clean.
-- Teach audit_submit(3) about getaudit_addr(2).
-- Add support for zonename tokens.
-
-OpenBSM 1.0 alpha 13
-
-- compat/clock_gettime.h now provides a compatibility implementation of
- clock_gettime(), which fixes building on Mac OS X.
-- Countless man page improvements, markup fixes, content fixs, etc.
-- XML printing support via "praudit -x".
-- audit.log.5 expanded to include additional BSM token types.
-- Added encoding and decoding routines for process64_ex, process32_ex,
- subject32_ex, header64, and attr64 tokens.
-- Additional audit event identifiers for listen, mlockall/munlockall,
- getpath, POSIX message queues, and mandatory access control.
-
-OpenBSM 1.0 alpha 12
-
-- Correct bug in auditreduce which prevented the -c option from working
- correctly when the user specifies to process successful or failed events.
- The problem stemmed from not having access to the return token at the time
- the initial preselection occurred, but now a second preselection process
- occurs while processing the return token.
-- getacfilesz(3) API added to read new audit_control(5) filesz setting,
- which auditd(8) now sets the kernel audit trail rotation size to.
-- auditreduce(1) now uses stdin if no file names are specified on the command
- line; this was the documented behavior previously, but it was not
- implemented. Be more specific in auditreduce(1)'s examples section about
- what might be done with the output of auditreduce.
-- Add audit_warn(5) closefile event so that administrators can hook
- termination of an audit trail file. For example, this might be used to
- compress the trail file after it is closed.
-- auditreduce(1) now uses regular expressions for pathname matching. Users can
- now supply one or more (comma delimited) regular expressions for searching
- the pathnames. If one of the regular expressions is prefixed with a tilde
- (~), and a path matches, it will be excluded from the search results.
-
-OpenBSM 1.0 alpha 11
-
-- Reclassify certain read/write operations as having no class rather than the
- fr/fw class; our default classes audit intent (open) not operations (read,
- write).
-- Introduce AUE_SYSCTL_WRITE event so that BSD/Darwin systems can audit reads
- and writes of sysctls as separate events. Add additional kernel
- environment and jail events for FreeBSD.
-- Break AUDIT_TRIGGER_OPEN_NEW into two events, AUDIT_TRIGGER_ROTATE_USER
- (issued by the user audit(8) tool) and AUDIT_TRIGGER_ROTATE_KERNEL (issued
- by the kernel audit implementation) so that they can be distinguished.
-- Disable rate limiting of rotate requests; as the kernel doesn't retransmit
- a dropped request, the log file will otherwise grow indefinitely if the
- trigger is dropped.
-- Improve auditd debugging output.
-- Fix a number of threading related bugs in audit_control file reading
- routines.
-- Add APIs au_poltostr() and au_strtopol() to convert between text
- representations of audit_control policy flags and the flags passed to
- auditon(A_SETPOLICY) and retrieved from auditon(A_GETPOLICY).
-- Add API getacpol() to return the 'policy:' entry from audit_control, an
- extension to the Solaris file format to allow specification of policy
- persistent flags.
-- Update audump to print the audit_control policy field.
-- Update auditd to read the audit_control policy field and set the kernel
- policy to match it when configuring/reconfiguring. Remove the -s and -h
- arguments as these policies are now set via the configuration file. If a
- policy line is not found in the configuration file, continue with the
- current default of setting AUDIT_CNT.
-- Fix bugs in the parsing of large execve(2) arguments and environmental
- variable tokens; increase maximum parsed argument and variable count.
-- configure now detects strlcat(), used by policy-related functions.
-- Reference token and record sample files added to test tree.
-
-OpenBSM 1.0 alpha 10
-
-- auditd now generates complete audit records for its events, as required for
- application-submitted audit records in the the FreeBSD kernel audit
- implementation.
-
-OpenBSM 1.0 alpha 9
-
-- Rename many OpenBSM-specific constants and API elements containing the
- strings "BSM" and "bsm" to "AUDIT" and "audit", observing that this is true
- for almost all existing constants and APIs.
-- Instead of passing a per-instance cookie directly into all audit filter
- APIs, pass in the audit filter daemon state pointer, which is then used by
- the module using an audit_filter_{get,set}cookie() API. This will allow
- future service APIs provided by the filter daemon to maintain their own
- state -- for example, per-module preselection state.
-
-OpenBSM 1.0 alpha 8
-
-- Correct typo in definition of AUR_INT.
-- Adopt OpenSolaris constant values for AUDIT_* configuration flags.
-- Arguments to au_to_exec_args() and au_to_exec_env() no longer const.
-- Add kernel versions of au_to_exec_args() and au_to_exec_env().
-- Fix exec argument type that is printed for env strings from 'arg' to 'env'.
-- New OpenBSM token version number assigned, constants added for other
- commonly seen version numbers.
-- OpenBSM-specific events assigned numbers in the 43xxx range to avoid future
- collisions with Solaris. Darwin events renamed to AUE_DARWIN_foo, as they
- are now deprecated numberings.
-- autoconf now detects clock_gettime(), which is not available on Darwin.
-- praudit output fixes relating to arg32 and arg64 tokens.
-- Maximum record size updated to 64k-1 to match Solaris record size limit.
-- Various style and comment cleanups in include files.
-
-OpenBSM 1.0 alpha 7
-
-- Adopted Solaris-compatible format for subject32_ex and subject64_ex
- tokens, which previously did not correctly implement variable length
- address storage.
-- Prefer inttypes.h to stdint.h; enhance queue.h detection to test for
- TAILQ_FOREACH_SAFE(), which is present in recent BSD queue.h's, but not
- older ones. OpenBSM now builds on some FreeBSD 4.x version.
-- New event types for extended attributes, ACLs, and scheduling.
-
-OpenBSM 1.0 alpha 6
-
-- Use AU_TO_WRITE and AU_NO_TO_WRITE for the 'keep' argument to au_close();
- previously we used hard-coded 0 and 1 values.
-- Add man page for au_open(), au_write(), au_close(), and
- au_close_buffer().
-- Support a more complete range of data types for the arbitrary data token:
- add AUR_CHAR (alias to AUR_BYTE), remove AUR_LONG, add AUR_INT32 (alias
- to AUR_INT), add AUR_INT64.
-- Add au_close_token(), which allows writing a single token_t to a memory
- buffer. Not likely to be used much by applications, but useful for
- writing test tools.
-- Modify au_to_file() so that it accepts a timeval in user space, not just
- kernel -- this is not a Solaris BSM API so can be modified without
- causing compatibility issues.
-- Define a new API, au_to_header32_tm(), which adds a struct timeval
- argument to the ordinary au_to_header32(), which is now implemented by
- wrapping au_to_header32_tm() and calling gettimeofday(). #ifndef KERNEL
- the APIs that invoke gettimeofday(), rather than having a variable
- definition. Don't try to retrieve time zone information using
- gettimeofday(), as it's not needed, and introduces possible failure
- modes.
-- Don't perform byte order transformations on the addr/machine fields of
- the terminal ID that appears in the process32/subject32 tokens. These
- are assumed to be IP addresses, and as such, to be in network byte
- order.
-- Universally, APIs now assume that IP addresses and ports are provided
- in network byte order. APIs now generally provide these types in
- network byte order when decoding.
-- Beginnings of an OpenBSM test framework can now be found in openbsm/test.
- This code is not built or installed by default.
-- auditd now assigns more appropriate syslog levels to its debugging and
- error information.
-- Support for audit filters introduced: audit filters are dynamically
- loaded shared objects that run in the context of a new daemon,
- auditfilterd. The daemon reads from an audit pipe and feeds both BSM and
- parsed versions of records to shared objects using a module API. This
- will provide a framework for the writing of intrusion detection services.
-- New utility API, audit_submit(), added to capture common elements of audit
- record submission for many applications.
-
-OpenBSM 1.0 alpha 5
-
-- Update install notes to indicate /etc files are to be installed manually.
-- On systems without LOG_SECURITY, use LOG_AUTH.
-- Convert to autoconf/automake in order to move to a more portable (not
- BSD-specific) build infrastructure, and more easy conditional building of
- components. Currently, the primary feature loss is that automake does
- not have native support for manual symlinks. This will be addressed in a
- future OpenBSM release.
-- Add compat/queue.h, to be used on systems dated BSD queue macro libraries
- (as found on Linux).
-- Rename CHANGELOG to HISTORY, as our change log doesn't follow some of the
- existing conventions for a CHANGELOG.
-- Some private data structures moved from audit.h to audit_internal.h to
- prevent inappropriate use by applications and name space pollution.
-- Improved detection and use of endian macros using autoconf.
-- Avoid non-portable use of struct in6_addr, which is largely opaque.
-- Avoid leaking BSD kernel socket related token code to user space in
- bsm_token.c.
-- Teach System V IPC calls to look for Linux naming variations for certain
- struct ipc_perm fields.
-- Test for audit system calls, and if not present, don't build
- bsm_wrappers.c, bsm_notify.c, audit(8), and auditd(8), which rely on
- those system calls.
-- au_close() is not implemented on systems that don't have audit system
- calls, but au_close_buffer() is.
-- Work around missing BSDisms in bsm_wrapper.c.
-- Fix nested includes so including libbsm.h in an application on Linux
- picks up the necessary definitions.
-
-OpenBSM 1.0 alpha 4
-
-- Remove "audit" user example from audit_user, as it's not present on most
- systems.
-- Add cannot_audit() function non-Darwin systems that wraps auditon();
- required by OpenSSH BSM support. Convert Darwin cannot_audit() into a
- function rather than a macro.
-- Library build fixed on Darwin following include file tweaks. The native
- Darwin sys/audit.h conflicts with bsm/audit.h due to duplicate types, so
- for now we force bsm_wrappers.c to not perform a nested include of
- sys/audit.h.
-
-OpenBSM 1.0 alpha 3
-
-- Man page formatting, cross reference, mlinks, and accuracy improvements.
-- auditd and tools now compile and run on FreeBSD/arm.
-- auditd will now fchown() the trail file to the audit review group, if
- defined at compile-time.
-- Added AUE_SYSARCH for FreeBSD.
-- Definition of AUE_SETFSGID fixed for Linux.
-
-OpenBSM 1.0 alpha 2
-
-- Man page formatting improvements.
-- A number of new audit event identifiers for FreeBSD, Linux, and POSIX.1b
- events.
-- Remove 'tfm' class, unused in OpenBSM.
-
-OpenBSM 1.0 alpha 1
-
-- Import of Darwin74 BSM drop
-- Use 'syslog' for audit log warnings, rather than echoing to a file in
- audit_warn.
-- Compile using BSD make infrastructure.
-- Integrate bsm/ include files from Darwin74 XNU drop into OpenBSM.
-- Narrow set of symbols and defines that are exposed in user space: don't
- compile in code relying on kernel-only types such as 'struct socket'.
-- Add README, including basic build documentation.
-- Compilation of Apple-specific notify and Machroutines now #ifdef __APPLE__.
-- Staticize libbsm global variables to avoid leakage into application.
-- Add free_au_user_ent() so that au_user_ent's don't have to be leaked.
-- Clean up bogus nul-termination checks in libbsm.
-- Add libbsm API man pages: au_class.3 au_control.3 au_event.3
- au_free_token.3 au_io.3 au_mask.3 au_token.3 au_user.3 libbsm.3.
-- Add man pages for BSM system calls: audit.2 auditctl.2 auditon.2 getaudit.2
- getauid.2 setaudit.2 setauid.2
-- Modify various libbsm interfaces to more consistently return 'errno' values
- on failure.
-- Break out au_close() into constituent parts, allowing records to be written
- to memory as well as files.
-- Prefix various defines with 'BSM_' to reduce name space pollution.
-- Added audit_internal.h, which can be used by a kernel audit implementation
- wanting to rely on libbsm components.
-- Build with warnings, and eliminate warnings.
-- Make libbsm endian-independent, storing and reading BSM are big endian
- (network byte order) rather than native byte order. More consistently
- print IP addresses using the IP address print routine. These changes
- make use of sys/endian.h from *BSD; since this isn't present on Darwin,
- add it to OpenBSM as compat/endian.h, which is used only on Darwin.
-- Import of Darwin80 BSM drop, including 64-bit file IDs, better
- documentation of private APIs, and bug fixes.
-- White space cleanup.
-- Add audit.log.5, a first cut at a man page documenting the BSM file format.
-- Teach au_read_rec() to recognize stand-alone file tokens, which are present
- at the beginning and end of Solaris audit trails. Technically, these
- appear to violate the high level BSM spec, which suggests that all tokens
- are present in records, but need to be supported.
-- Implement HEADER64, ATTR64, SUBJECT64 token types, which make it possible
- to run praudit(1) on basic Solaris BSM streams.
-- Switched to Solaris spelling of token names; Darwin spellings are now
- deprecated and will be removed in a future version of OpenBSM.
-- Adopt Solaris model for representing IPv4 and IPv6 addresses.
-- Prefer C99 types.
-- Attempt to universally adopt the BSD style(9) coding style for
- consistency.
-- auditreduce(1) now has a usage message.
-- Update support for auditctl(2) system call to support FreeBSD.
-- Add support for /dev/audit as the trigger source on FreeBSD.
-- Add additional event types for Darwin, FreeBSD, and Solaris. Annotate
- conflicts (there are a few, unfortunately). Correct spellings, comment,
- sort, etc. These include {get,set}res[ug]id(), sendfile(), lchflags(),
- eaccess(), kqueue(), kevent(), poll(), lchmod().
-- Relicensed under a BSD license, many thanks to Apple, Inc!
-- Many bug fixes, cleanups, thread safety in the class, control, event,
- and user system audit databases. Annotate some persisting atomicity
- bugs associated with the API and implementation.
-- Add audump test tool.
-- Adopt OpenSolaris BSM API memory semantics: caller allocates memory,
- or static memory is returned for non-_r() versions of API calls.
- _free() calls dropped as a result, and source code compatibility with
- OpenSolaris improved significantly.
-- Annotate BSM events with origin OS and compatibility information.
-- auditd(8), audit(8) added to the OpenBSM distribution. auditd extended
- to support reloading of kernel event table.
-- Allow comments in /etc/security configuration files.
-
-$P4: //depot/projects/trustedbsd/openbsm/HISTORY#57 $
Copied: vendor/openbsm/1.2_alpha4/INSTALL (from rev 11163, vendor/openbsm/dist/INSTALL)
===================================================================
--- vendor/openbsm/1.2_alpha4/INSTALL (rev 0)
+++ vendor/openbsm/1.2_alpha4/INSTALL 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,40 @@
+OpenBSM Build and Installation Instructions
+
+OpenBSM is currently built using autoconf and automake, which should allow
+for building on a range of operating systems, including FreeBSD, Mac OS X,
+and Linux. Some components are built only if appropriate kernel audit
+support is found. Typical builds will be performed using:
+
+ ./configure
+ make
+
+If doing development work on OpenBSM with gcc, the following invocation of
+configure is preferred in order to generate full compiler warnings and force
+the compile to fail if a warning is found:
+
+ CFLAGS="-Wall -Werror" ./configure
+
+On Linux systems, OpenSSL headers may have to be installed to support
+encryption of on-the-wire audit streams using auditdistd; the following
+appears to work on Ubuntu:
+
+ sudo apt-get install libssl-dev
+
+To install the library, binaries, and man pages, use:
+
+ make install
+
+The OpenBSM install will not install files in /etc; these have to be
+manually installed or merged. Currently, the locations of these files are
+not configurable.
+
+You may wish to specify that the OpenBSM components not be installed in the
+base system, rather in a specific directory. This may be done using the
+--prefix argument to configure. If installing to a specific directory,
+remember to update your library path so that when running tools from that
+directory the correct libbsm is used:
+
+ ./configure --prefix=/home/rwatson/openbsm
+ make
+ make install
+ LD_LIBRARY_PATH=/home/rwatson/openbsm/libbsm ; export LD_LIBRARY_PATH
Deleted: vendor/openbsm/1.2_alpha4/LICENSE
===================================================================
--- vendor/openbsm/dist/LICENSE 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/LICENSE 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,33 +0,0 @@
-OpenBSM is covered by a number of copyrights, with licenses being either two
-or three clause BSD licenses. Individual file headers should be consulted
-for specific copyrights on specific components. The TrustedBSD Project would
-appreciate the contribution of fixes and enhancements under identical or
-substantially similar licenses:
-
- * Copyright (c) <year> <copyright holder>
- * All rights reserved.
- *
- * <any additional comments or credits>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
-
-$P4: //depot/projects/trustedbsd/openbsm/LICENSE#4 $
Copied: vendor/openbsm/1.2_alpha4/LICENSE (from rev 11163, vendor/openbsm/dist/LICENSE)
===================================================================
--- vendor/openbsm/1.2_alpha4/LICENSE (rev 0)
+++ vendor/openbsm/1.2_alpha4/LICENSE 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,36 @@
+OpenBSM Copyrights and Licensing
+
+OpenBSM is covered by a number of copyrights, with licenses being either two
+or three clause BSD licenses. Individual file headers should be consulted
+for copyrights on specific elements of the distribution.
+
+The following copyright and license are asserted over the OpenBSM distribution
+as a whole:
+
+ Copyright (c) 2005-2012 Robert N.M. Watson
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ SUCH DAMAGE.
+
+The TrustedBSD Project would appreciate the contribution of fixes and
+enhancements under an identical license in order to avoid potentially
+confusing license proliferation.
Deleted: vendor/openbsm/1.2_alpha4/Makefile.am
===================================================================
--- vendor/openbsm/dist/Makefile.am 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/Makefile.am 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,17 +0,0 @@
-#
-# $P4: //depot/projects/trustedbsd/openbsm/Makefile.am#2 $
-#
-
-SUBDIRS = \
- bsm \
- libbsm \
- bin \
- man \
- modules
-
-EXTRA_DIST = \
- CHANGELOG \
- LICENSE \
- README \
- TODO \
- VERSION
Copied: vendor/openbsm/1.2_alpha4/Makefile.am (from rev 11163, vendor/openbsm/dist/Makefile.am)
===================================================================
--- vendor/openbsm/1.2_alpha4/Makefile.am (rev 0)
+++ vendor/openbsm/1.2_alpha4/Makefile.am 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,23 @@
+SUBDIRS = \
+ bsm
+
+if HAVE_AUDIT_SYSCALLS
+SUBDIRS += \
+ libauditd
+endif
+
+SUBDIRS += \
+ libbsm \
+ bin \
+ man \
+ modules \
+ sys
+
+ACLOCAL_AMFLAGS = -I m4
+
+EXTRA_DIST = \
+ CHANGELOG \
+ LICENSE \
+ README \
+ TODO \
+ VERSION
Deleted: vendor/openbsm/1.2_alpha4/Makefile.in
===================================================================
--- vendor/openbsm/dist/Makefile.in 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/Makefile.in 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,643 +0,0 @@
-# Makefile.in generated by automake 1.10 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
- at SET_MAKE@
-
-#
-# $P4: //depot/projects/trustedbsd/openbsm/Makefile.in#5 $
-#
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = .
-DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
- $(srcdir)/Makefile.in $(top_srcdir)/config/config.h.in \
- $(top_srcdir)/configure TODO config/config.guess \
- config/config.sub config/depcomp config/install-sh \
- config/ltmain.sh config/missing
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
- configure.lineno config.status.lineno
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/config/config.h
-CONFIG_CLEAN_FILES =
-SOURCES =
-DIST_SOURCES =
-RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
- html-recursive info-recursive install-data-recursive \
- install-dvi-recursive install-exec-recursive \
- install-html-recursive install-info-recursive \
- install-pdf-recursive install-ps-recursive install-recursive \
- installcheck-recursive installdirs-recursive pdf-recursive \
- ps-recursive uninstall-recursive
-RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
- distclean-recursive maintainer-clean-recursive
-ETAGS = etags
-CTAGS = ctags
-DIST_SUBDIRS = $(SUBDIRS)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-am__remove_distdir = \
- { test ! -d $(distdir) \
- || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
- && rm -fr $(distdir); }; }
-DIST_ARCHIVES = $(distdir).tar.gz
-GZIP_ENV = --best
-distuninstallcheck_listfiles = find . -type f -print
-distcleancheck_listfiles = find . -type f -print
-ACLOCAL = @ACLOCAL@
-AMTAR = @AMTAR@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO = @ECHO@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-F77 = @F77@
-FFLAGS = @FFLAGS@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-VERSION = @VERSION@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-SUBDIRS = \
- bsm \
- libbsm \
- bin \
- man \
- modules
-
-EXTRA_DIST = \
- CHANGELOG \
- LICENSE \
- README \
- TODO \
- VERSION
-
-all: all-recursive
-
-.SUFFIXES:
-am--refresh:
- @:
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- echo ' cd $(srcdir) && $(AUTOMAKE) --foreign '; \
- cd $(srcdir) && $(AUTOMAKE) --foreign \
- && exit 0; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
- cd $(top_srcdir) && \
- $(AUTOMAKE) --foreign Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- echo ' $(SHELL) ./config.status'; \
- $(SHELL) ./config.status;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- $(SHELL) ./config.status --recheck
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(srcdir) && $(AUTOCONF)
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config/config.h: config/stamp-h1
- @if test ! -f $@; then \
- rm -f config/stamp-h1; \
- $(MAKE) $(AM_MAKEFLAGS) config/stamp-h1; \
- else :; fi
-
-config/stamp-h1: $(top_srcdir)/config/config.h.in $(top_builddir)/config.status
- @rm -f config/stamp-h1
- cd $(top_builddir) && $(SHELL) ./config.status config/config.h
-$(top_srcdir)/config/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_srcdir) && $(AUTOHEADER)
- rm -f config/stamp-h1
- touch $@
-
-distclean-hdr:
- -rm -f config/config.h config/stamp-h1
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-
-distclean-libtool:
- -rm -f libtool
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-# (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
-$(RECURSIVE_TARGETS):
- @failcom='exit 1'; \
- for f in x $$MAKEFLAGS; do \
- case $$f in \
- *=* | --[!k]*);; \
- *k*) failcom='fail=yes';; \
- esac; \
- done; \
- dot_seen=no; \
- target=`echo $@ | sed s/-recursive//`; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- dot_seen=yes; \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || eval $$failcom; \
- done; \
- if test "$$dot_seen" = "no"; then \
- $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
- fi; test -z "$$fail"
-
-$(RECURSIVE_CLEAN_TARGETS):
- @failcom='exit 1'; \
- for f in x $$MAKEFLAGS; do \
- case $$f in \
- *=* | --[!k]*);; \
- *k*) failcom='fail=yes';; \
- esac; \
- done; \
- dot_seen=no; \
- case "$@" in \
- distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
- *) list='$(SUBDIRS)' ;; \
- esac; \
- rev=''; for subdir in $$list; do \
- if test "$$subdir" = "."; then :; else \
- rev="$$subdir $$rev"; \
- fi; \
- done; \
- rev="$$rev ."; \
- target=`echo $@ | sed s/-recursive//`; \
- for subdir in $$rev; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || eval $$failcom; \
- done && test -z "$$fail"
-tags-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
- done
-ctags-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
- done
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- mkid -fID $$unique
-tags: TAGS
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
- include_option=--etags-include; \
- empty_fix=.; \
- else \
- include_option=--include; \
- empty_fix=; \
- fi; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- test ! -f $$subdir/TAGS || \
- tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
- fi; \
- done; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
- test -n "$$unique" || unique=$$empty_fix; \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$tags $$unique; \
- fi
-ctags: CTAGS
-CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(CTAGS_ARGS)$$tags$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$tags $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && cd $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) $$here
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
- $(am__remove_distdir)
- test -d $(distdir) || mkdir $(distdir)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
- fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
- else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
- || exit 1; \
- fi; \
- done
- list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- test -d "$(distdir)/$$subdir" \
- || $(MKDIR_P) "$(distdir)/$$subdir" \
- || exit 1; \
- distdir=`$(am__cd) $(distdir) && pwd`; \
- top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
- (cd $$subdir && \
- $(MAKE) $(AM_MAKEFLAGS) \
- top_distdir="$$top_distdir" \
- distdir="$$distdir/$$subdir" \
- am__remove_distdir=: \
- am__skip_length_check=: \
- distdir) \
- || exit 1; \
- fi; \
- done
- -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
- ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
- ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
- ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
- || chmod -R a+r $(distdir)
-dist-gzip: distdir
- tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
- $(am__remove_distdir)
-
-dist-bzip2: distdir
- tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
- $(am__remove_distdir)
-
-dist-tarZ: distdir
- tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
- $(am__remove_distdir)
-
-dist-shar: distdir
- shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
- $(am__remove_distdir)
-
-dist-zip: distdir
- -rm -f $(distdir).zip
- zip -rq $(distdir).zip $(distdir)
- $(am__remove_distdir)
-
-dist dist-all: distdir
- tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
- $(am__remove_distdir)
-
-# This target untars the dist file and tries a VPATH configuration. Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
- case '$(DIST_ARCHIVES)' in \
- *.tar.gz*) \
- GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
- *.tar.bz2*) \
- bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
- *.tar.Z*) \
- uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
- *.shar.gz*) \
- GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
- *.zip*) \
- unzip $(distdir).zip ;;\
- esac
- chmod -R a-w $(distdir); chmod a+w $(distdir)
- mkdir $(distdir)/_build
- mkdir $(distdir)/_inst
- chmod a-w $(distdir)
- dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
- && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
- && cd $(distdir)/_build \
- && ../configure --srcdir=.. --prefix="$$dc_install_base" \
- $(DISTCHECK_CONFIGURE_FLAGS) \
- && $(MAKE) $(AM_MAKEFLAGS) \
- && $(MAKE) $(AM_MAKEFLAGS) dvi \
- && $(MAKE) $(AM_MAKEFLAGS) check \
- && $(MAKE) $(AM_MAKEFLAGS) install \
- && $(MAKE) $(AM_MAKEFLAGS) installcheck \
- && $(MAKE) $(AM_MAKEFLAGS) uninstall \
- && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
- distuninstallcheck \
- && chmod -R a-w "$$dc_install_base" \
- && ({ \
- (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
- && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
- && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
- && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
- distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
- } || { rm -rf "$$dc_destdir"; exit 1; }) \
- && rm -rf "$$dc_destdir" \
- && $(MAKE) $(AM_MAKEFLAGS) dist \
- && rm -rf $(DIST_ARCHIVES) \
- && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
- $(am__remove_distdir)
- @(echo "$(distdir) archives ready for distribution: "; \
- list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
- sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
-distuninstallcheck:
- @cd $(distuninstallcheck_dir) \
- && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
- || { echo "ERROR: files left after uninstall:" ; \
- if test -n "$(DESTDIR)"; then \
- echo " (check DESTDIR support)"; \
- fi ; \
- $(distuninstallcheck_listfiles) ; \
- exit 1; } >&2
-distcleancheck: distclean
- @if test '$(srcdir)' = . ; then \
- echo "ERROR: distcleancheck can only run from a VPATH build" ; \
- exit 1 ; \
- fi
- @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
- || { echo "ERROR: files left in build directory after distclean:" ; \
- $(distcleancheck_listfiles) ; \
- exit 1; } >&2
-check-am: all-am
-check: check-recursive
-all-am: Makefile
-installdirs: installdirs-recursive
-installdirs-am:
-install: install-recursive
-install-exec: install-exec-recursive
-install-data: install-data-recursive
-uninstall: uninstall-recursive
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-recursive
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-recursive
-
-clean-am: clean-generic clean-libtool mostlyclean-am
-
-distclean: distclean-recursive
- -rm -f $(am__CONFIG_DISTCLEAN_FILES)
- -rm -f Makefile
-distclean-am: clean-am distclean-generic distclean-hdr \
- distclean-libtool distclean-tags
-
-dvi: dvi-recursive
-
-dvi-am:
-
-html: html-recursive
-
-info: info-recursive
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-recursive
-
-install-exec-am:
-
-install-html: install-html-recursive
-
-install-info: install-info-recursive
-
-install-man:
-
-install-pdf: install-pdf-recursive
-
-install-ps: install-ps-recursive
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-recursive
- -rm -f $(am__CONFIG_DISTCLEAN_FILES)
- -rm -rf $(top_srcdir)/autom4te.cache
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-recursive
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-recursive
-
-pdf-am:
-
-ps: ps-recursive
-
-ps-am:
-
-uninstall-am:
-
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
- install-strip
-
-.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
- all all-am am--refresh check check-am clean clean-generic \
- clean-libtool ctags ctags-recursive dist dist-all dist-bzip2 \
- dist-gzip dist-shar dist-tarZ dist-zip distcheck distclean \
- distclean-generic distclean-hdr distclean-libtool \
- distclean-tags distcleancheck distdir distuninstallcheck dvi \
- dvi-am html html-am info info-am install install-am \
- install-data install-data-am install-dvi install-dvi-am \
- install-exec install-exec-am install-html install-html-am \
- install-info install-info-am install-man install-pdf \
- install-pdf-am install-ps install-ps-am install-strip \
- installcheck installcheck-am installdirs installdirs-am \
- maintainer-clean maintainer-clean-generic mostlyclean \
- mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
- tags tags-recursive uninstall uninstall-am
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
Copied: vendor/openbsm/1.2_alpha4/Makefile.in (from rev 11163, vendor/openbsm/dist/Makefile.in)
===================================================================
--- vendor/openbsm/1.2_alpha4/Makefile.in (rev 0)
+++ vendor/openbsm/1.2_alpha4/Makefile.in 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,777 @@
+# Makefile.in generated by automake 1.12.2 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2012 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+ at SET_MAKE@
+VPATH = @srcdir@
+am__make_dryrun = \
+ { \
+ am__dry=no; \
+ case $$MAKEFLAGS in \
+ *\\[\ \ ]*) \
+ echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
+ | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+ *) \
+ for am__flg in $$MAKEFLAGS; do \
+ case $$am__flg in \
+ *=*|--*) ;; \
+ *n*) am__dry=yes; break;; \
+ esac; \
+ done;; \
+ esac; \
+ test $$am__dry = yes; \
+ }
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+ at HAVE_AUDIT_SYSCALLS_TRUE@am__append_1 = \
+ at HAVE_AUDIT_SYSCALLS_TRUE@ libauditd
+
+subdir = .
+DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
+ $(srcdir)/Makefile.in $(top_srcdir)/config/config.guess \
+ $(top_srcdir)/config/config.h.in \
+ $(top_srcdir)/config/config.sub \
+ $(top_srcdir)/config/install-sh $(top_srcdir)/config/ltmain.sh \
+ $(top_srcdir)/config/missing $(top_srcdir)/configure INSTALL \
+ NEWS TODO config/compile config/config.guess config/config.sub \
+ config/depcomp config/install-sh config/ltmain.sh \
+ config/missing config/ylwrap
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
+ configure.lineno config.status.lineno
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+ html-recursive info-recursive install-data-recursive \
+ install-dvi-recursive install-exec-recursive \
+ install-html-recursive install-info-recursive \
+ install-pdf-recursive install-ps-recursive install-recursive \
+ installcheck-recursive installdirs-recursive pdf-recursive \
+ ps-recursive uninstall-recursive
+am__can_run_installinfo = \
+ case $$AM_UPDATE_INFO_DIR in \
+ n|no|NO) false;; \
+ *) (install-info --version) >/dev/null 2>&1;; \
+ esac
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
+ distclean-recursive maintainer-clean-recursive
+AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
+ $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
+ cscope distdir dist dist-all distcheck
+ETAGS = etags
+CTAGS = ctags
+CSCOPE = cscope
+DIST_SUBDIRS = bsm libauditd libbsm bin man modules sys
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+distdir = $(PACKAGE)-$(VERSION)
+top_distdir = $(distdir)
+am__remove_distdir = \
+ if test -d "$(distdir)"; then \
+ find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
+ && rm -rf "$(distdir)" \
+ || { sleep 5 && rm -rf "$(distdir)"; }; \
+ else :; fi
+am__post_remove_distdir = $(am__remove_distdir)
+am__relativize = \
+ dir0=`pwd`; \
+ sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+ sed_rest='s,^[^/]*/*,,'; \
+ sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+ sed_butlast='s,/*[^/]*$$,,'; \
+ while test -n "$$dir1"; do \
+ first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+ if test "$$first" != "."; then \
+ if test "$$first" = ".."; then \
+ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+ else \
+ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+ if test "$$first2" = "$$first"; then \
+ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+ else \
+ dir2="../$$dir2"; \
+ fi; \
+ dir0="$$dir0"/"$$first"; \
+ fi; \
+ fi; \
+ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+ done; \
+ reldir="$$dir2"
+DIST_ARCHIVES = $(distdir).tar.gz
+GZIP_ENV = --best
+DIST_TARGETS = dist-gzip
+distuninstallcheck_listfiles = find . -type f -print
+am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
+ | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
+distcleancheck_listfiles = find . -type f -print
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LEX = @LEX@
+LEXLIB = @LEXLIB@
+LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MIG = @MIG@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+VERSION = @VERSION@
+YACC = @YACC@
+YFLAGS = @YFLAGS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+SUBDIRS = bsm $(am__append_1) libbsm bin man modules sys
+ACLOCAL_AMFLAGS = -I m4
+EXTRA_DIST = \
+ CHANGELOG \
+ LICENSE \
+ README \
+ TODO \
+ VERSION
+
+all: all-recursive
+
+.SUFFIXES:
+am--refresh: Makefile
+ @:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
+ $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --foreign Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ echo ' $(SHELL) ./config.status'; \
+ $(SHELL) ./config.status;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ $(SHELL) ./config.status --recheck
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+ $(am__cd) $(srcdir) && $(AUTOCONF)
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+ $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+$(am__aclocal_m4_deps):
+
+config/config.h: config/stamp-h1
+ @if test ! -f $@; then rm -f config/stamp-h1; else :; fi
+ @if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) config/stamp-h1; else :; fi
+
+config/stamp-h1: $(top_srcdir)/config/config.h.in $(top_builddir)/config.status
+ @rm -f config/stamp-h1
+ cd $(top_builddir) && $(SHELL) ./config.status config/config.h
+$(top_srcdir)/config/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+ ($(am__cd) $(top_srcdir) && $(AUTOHEADER))
+ rm -f config/stamp-h1
+ touch $@
+
+distclean-hdr:
+ -rm -f config/config.h config/stamp-h1
+
+mostlyclean-libtool:
+ -rm -f *.lo
+
+clean-libtool:
+ -rm -rf .libs _libs
+
+distclean-libtool:
+ -rm -f libtool config.lt
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run 'make' without going through this Makefile.
+# To change the values of 'make' variables: instead of editing Makefiles,
+# (1) if the variable is set in 'config.status', edit 'config.status'
+# (which will cause the Makefiles to be regenerated when you run 'make');
+# (2) otherwise, pass the desired values on the 'make' command line.
+$(RECURSIVE_TARGETS) $(RECURSIVE_CLEAN_TARGETS):
+ @fail= failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+ done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+ done
+cscopelist-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) cscopelist); \
+ done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ set x; \
+ here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ shift; \
+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ if test $$# -gt 0; then \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ "$$@" $$unique; \
+ else \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$unique; \
+ fi; \
+ fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ test -z "$(CTAGS_ARGS)$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && $(am__cd) $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) "$$here"
+
+cscope: cscope.files
+ test ! -s cscope.files \
+ || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
+
+clean-cscope:
+ -rm -f cscope.files
+
+cscope.files: clean-cscope cscopelist-recursive cscopelist
+
+cscopelist: cscopelist-recursive $(HEADERS) $(SOURCES) $(LISP)
+ list='$(SOURCES) $(HEADERS) $(LISP)'; \
+ case "$(srcdir)" in \
+ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+ *) sdir=$(subdir)/$(srcdir) ;; \
+ esac; \
+ for i in $$list; do \
+ if test -f "$$i"; then \
+ echo "$(subdir)/$$i"; \
+ else \
+ echo "$$sdir/$$i"; \
+ fi; \
+ done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+ -rm -f cscope.out cscope.in.out cscope.po.out cscope.files
+
+distdir: $(DISTFILES)
+ $(am__remove_distdir)
+ test -d "$(distdir)" || mkdir "$(distdir)"
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+ else \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
+ || exit 1; \
+ fi; \
+ done
+ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ $(am__make_dryrun) \
+ || test -d "$(distdir)/$$subdir" \
+ || $(MKDIR_P) "$(distdir)/$$subdir" \
+ || exit 1; \
+ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+ $(am__relativize); \
+ new_distdir=$$reldir; \
+ dir1=$$subdir; dir2="$(top_distdir)"; \
+ $(am__relativize); \
+ new_top_distdir=$$reldir; \
+ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+ ($(am__cd) $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$new_top_distdir" \
+ distdir="$$new_distdir" \
+ am__remove_distdir=: \
+ am__skip_length_check=: \
+ am__skip_mode_fix=: \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+ -test -n "$(am__skip_mode_fix)" \
+ || find "$(distdir)" -type d ! -perm -755 \
+ -exec chmod u+rwx,go+rx {} \; -o \
+ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
+ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
+ ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
+ || chmod -R a+r "$(distdir)"
+dist-gzip: distdir
+ tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+ $(am__post_remove_distdir)
+
+dist-bzip2: distdir
+ tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
+ $(am__post_remove_distdir)
+
+dist-lzip: distdir
+ tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
+ $(am__post_remove_distdir)
+
+dist-xz: distdir
+ tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
+ $(am__post_remove_distdir)
+
+dist-tarZ: distdir
+ tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
+ $(am__post_remove_distdir)
+
+dist-shar: distdir
+ shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
+ $(am__post_remove_distdir)
+
+dist-zip: distdir
+ -rm -f $(distdir).zip
+ zip -rq $(distdir).zip $(distdir)
+ $(am__post_remove_distdir)
+
+dist dist-all:
+ $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
+ $(am__post_remove_distdir)
+
+# This target untars the dist file and tries a VPATH configuration. Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+ case '$(DIST_ARCHIVES)' in \
+ *.tar.gz*) \
+ GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
+ *.tar.bz2*) \
+ bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
+ *.tar.lz*) \
+ lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
+ *.tar.xz*) \
+ xz -dc $(distdir).tar.xz | $(am__untar) ;;\
+ *.tar.Z*) \
+ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
+ *.shar.gz*) \
+ GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
+ *.zip*) \
+ unzip $(distdir).zip ;;\
+ esac
+ chmod -R a-w $(distdir); chmod u+w $(distdir)
+ mkdir $(distdir)/_build
+ mkdir $(distdir)/_inst
+ chmod a-w $(distdir)
+ test -d $(distdir)/_build || exit 0; \
+ dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
+ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
+ && am__cwd=`pwd` \
+ && $(am__cd) $(distdir)/_build \
+ && ../configure --srcdir=.. --prefix="$$dc_install_base" \
+ $(AM_DISTCHECK_CONFIGURE_FLAGS) \
+ $(DISTCHECK_CONFIGURE_FLAGS) \
+ && $(MAKE) $(AM_MAKEFLAGS) \
+ && $(MAKE) $(AM_MAKEFLAGS) dvi \
+ && $(MAKE) $(AM_MAKEFLAGS) check \
+ && $(MAKE) $(AM_MAKEFLAGS) install \
+ && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+ && $(MAKE) $(AM_MAKEFLAGS) uninstall \
+ && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
+ distuninstallcheck \
+ && chmod -R a-w "$$dc_install_base" \
+ && ({ \
+ (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
+ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
+ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
+ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
+ distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
+ } || { rm -rf "$$dc_destdir"; exit 1; }) \
+ && rm -rf "$$dc_destdir" \
+ && $(MAKE) $(AM_MAKEFLAGS) dist \
+ && rm -rf $(DIST_ARCHIVES) \
+ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
+ && cd "$$am__cwd" \
+ || exit 1
+ $(am__post_remove_distdir)
+ @(echo "$(distdir) archives ready for distribution: "; \
+ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
+ sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
+distuninstallcheck:
+ @test -n '$(distuninstallcheck_dir)' || { \
+ echo 'ERROR: trying to run $@ with an empty' \
+ '$$(distuninstallcheck_dir)' >&2; \
+ exit 1; \
+ }; \
+ $(am__cd) '$(distuninstallcheck_dir)' || { \
+ echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
+ exit 1; \
+ }; \
+ test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
+ || { echo "ERROR: files left after uninstall:" ; \
+ if test -n "$(DESTDIR)"; then \
+ echo " (check DESTDIR support)"; \
+ fi ; \
+ $(distuninstallcheck_listfiles) ; \
+ exit 1; } >&2
+distcleancheck: distclean
+ @if test '$(srcdir)' = . ; then \
+ echo "ERROR: distcleancheck can only run from a VPATH build" ; \
+ exit 1 ; \
+ fi
+ @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
+ || { echo "ERROR: files left in build directory after distclean:" ; \
+ $(distcleancheck_listfiles) ; \
+ exit 1; } >&2
+check-am: all-am
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ if test -z '$(STRIP)'; then \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ install; \
+ else \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+ fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -f $(am__CONFIG_DISTCLEAN_FILES)
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-hdr \
+ distclean-libtool distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+html-am:
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-recursive
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-recursive
+
+install-html-am:
+
+install-info: install-info-recursive
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-recursive
+
+install-pdf-am:
+
+install-ps: install-ps-recursive
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f $(am__CONFIG_DISTCLEAN_FILES)
+ -rm -rf $(top_srcdir)/autom4te.cache
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am:
+
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) \
+ cscopelist-recursive ctags-recursive install-am install-strip \
+ tags-recursive
+
+.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
+ all all-am am--refresh check check-am clean clean-cscope \
+ clean-generic clean-libtool cscope cscopelist \
+ cscopelist-recursive ctags ctags-recursive dist dist-all \
+ dist-bzip2 dist-gzip dist-lzip dist-shar dist-tarZ dist-xz \
+ dist-zip distcheck distclean distclean-generic distclean-hdr \
+ distclean-libtool distclean-tags distcleancheck distdir \
+ distuninstallcheck dvi dvi-am html html-am info info-am \
+ install install-am install-data install-data-am install-dvi \
+ install-dvi-am install-exec install-exec-am install-html \
+ install-html-am install-info install-info-am install-man \
+ install-pdf install-pdf-am install-ps install-ps-am \
+ install-strip installcheck installcheck-am installdirs \
+ installdirs-am maintainer-clean maintainer-clean-generic \
+ mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
+ ps ps-am tags tags-recursive uninstall uninstall-am
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
Copied: vendor/openbsm/1.2_alpha4/NEWS (from rev 11163, vendor/openbsm/dist/NEWS)
===================================================================
--- vendor/openbsm/1.2_alpha4/NEWS (rev 0)
+++ vendor/openbsm/1.2_alpha4/NEWS 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,507 @@
+OpenBSM Version History
+
+OpenBSM 1.2 alpha 4
+
+- Fix praudit to emit correct XML.
+- Fix auditdistd bugs related to IPv6 support, locking, and a kqueue-related
+ descriptor leak.
+- Add audit event definitions for Capsicum-related syscalls, as well as
+ AUE_BINDAT and AUE_CONNECTAT.
+- Manpage symlinks for all libbsm functions are installed again after the
+ move to autotools in OpenBSM 1.0 Alpha 5.
+- A variety of minor documentation cleanups.
+
+OpenBSM 1.2 alpha 3
+
+- Various minor tweaks to the auditdistd build to make it fit the FreeBSD
+ build environment better.
+- AUE_WAIT6 merged from FreeBSD 9.
+
+OpenBSM 1.2 alpha 2
+
+- auditdistd, a distributed audit trail management daemon, has now been
+ merged. This allows trail files to be securely and reliably synced from
+ audited hosts to an audit server, and employs TLS encryption. Where
+ available, it uses Capsicum to sandbox the service. This work was
+ contributed by Pawel Jakub Dawidek under sponsorship from the FreeBSD
+ Foundation.
+
+OpenBSM 1.2 alpha 1
+
+- Add Capsicum-related error numbers for FreeBSD: ENOTCAPABLE, ECAPMODE.
+- Add Capsicum, process descriptor audit events for FreeBSD.
+- Allow 0% minspace.
+- Fixes from the clang static analyser.
+- Fix expiration of trail files when the host parameter is used.
+- Various typo fixes.
+- Support for Solaris privilege and privilege set tokens.
+- Documentation for getachost(), improvements for getacfilesz().
+- Fix a directory descriptor leak that happened when audit trail partitions
+ filled.
+- Support for more Linux distributions with a partial contemporary endian.h.
+- Improved escaping of XML-encapsulated BSM.
+- A variety of minor documentation, style, and functional.
+
+OpenBSM 1.1p2
+
+- Fix audit_event definitions of AUE_OPENAT_RWT and AUE_OPENAT_RWTC.
+- Fix build on Linux.
+- Fix printing of class masks in the audump tool.
+
+OpenBSM 1.1p1
+
+- Fixes to AUT_SOCKUNIX token parsing.
+- IPv6 support for au_to_me(3).
+- Improved robustness in the parsing of audit_control, especially long
+ flags/naflags strings and whitespace in all fields.
+- Add missing conversion of a number of FreeBSD/Mac OS X errnos to/from BSM
+ error number space.
+
+OpenBSM 1.1
+
+- Change auditon(2) parameters and data structures to be 32/64-bit architecture
+ independent. Add more information to man page about auditon(2) parameters.
+- Add wrapper functions for auditon(2) to use legacy commands when the new
+ commands are not supported.
+- Add default for 'expire-after' in audit_control to expire trail files when
+ the audit directory is more than 10 megabytes ('10M').
+- Interface to convert between local and BSM fcntl(2) command values has been
+ added: au_bsm_to_fcntl_cmd(3) and au_fcntl_cmd_to_bsm(3), along with
+ definitions of constants in audit_fcntl.h.
+- A bug, introduced in OpenBSM 1.1 alpha 4, in which AUT_RETURN32 tokens
+ generated by audit_submit(3) were improperly encoded has been fixed.
+- Fix example in audit_submit(3) man page. Also, make it clear that we want
+ the audit ID as the argument.
+- A new audit event class 'aa', for post-login authentication and
+ authorization events, has been added.
+
+OpenBSM 1.1 beta 1
+
+- The filesz parameter in audit_control(5) now accepts suffixes: 'B' for
+ Bytes, 'K' for Kilobytes, 'M' for Megabytes, and 'G' for Gigabytes.
+ For legacy support no suffix defaults to bytes.
+- Audit trail log expiration support added. It is configured in
+ audit_control(5) with the expire-after parameter. If there is no
+ expire-after parameter in audit_control(5), the default, then the audit
+ trail files are not expired and removed. See audit_control(5) for
+ more information.
+- Change defaults in audit_control: warn at 5% rather than 20% free for audit
+ partitions, rotate automatically at 2mb, and set the default policy to
+ cnt,argv rather than cnt so that execve(2) arguments are captured if
+ AUE_EXECVE events are audited. These may provide more usable defaults for
+ many users.
+- Use au_domain_to_bsm(3) and au_socket_type_to_bsm(3) to convert
+ au_to_socket_ex(3) arguments to BSM format.
+- Fix error encoding AUT_IPC_PERM tokens.
+
+OpenBSM 1.1 alpha 5
+
+- Stub libauditd(3) man page added.
+- All BSM error number constants with BSM_ERRNO_.
+- Interfaces to convert between local and BSM socket types and protocol
+ families have been added: au_bsm_to_domain(3), au_bsm_to_socket_type(3),
+ au_domain_to_bsm(3), and au_socket_type_to_bsm(3), along with definitions
+ of constants in audit_domain.h and audit_socket_type.h. This improves
+ interoperability by converting local constant spaces, which vary by OS, to
+ and from Solaris constants (where available) or OpenBSM constants for
+ protocol domains not present in Solaris (a fair number). These routines
+ should be used when generating and interpreting extended socket tokens.
+- Fix build warnings with full gcc warnings enabled on most supported
+ platforms.
+- Don't compile error strings into bsm_errno.c when building it in the kernel
+ environment.
+- When started by launchd, use the label com.apple.auditd rather than
+ org.trustedbsd.auditd.
+
+OpenBSM 1.1 alpha 4
+
+- With the addition of BSM error number mapping, we also need to map the
+ local error number passed to audit_submit(3) to a BSM error number, rather
+ than have the caller perform that conversion.
+- Reallocate user audit events to avoid collisions with Solaris; adopt a more
+ formal allocation scheme, and add some events allocated in Solaris that
+ will be of immediate use on other platforms.
+- Add an event for Calife.
+- Add au_strerror(3), which allows generating strings for BSM errors
+ directly, rather than requiring applications to map to the local error
+ space, which might not be able to entirely represent the BSM error number
+ space.
+- Major auditd rewrite for launchd(8) support. Add libauditd library that is
+ shared between launchd and auditd.
+- Add AUDIT_TRIGGER_INITIALIZE trigger (sent via 'audit -i') for (re)starting
+ auditing under launchd(8) on Mac OS X.
+- Add 'current' symlink to active audit trail.
+- Add crash recovery of previous audit trail file when detected on audit
+ startup that it has not been properly terminated.
+- Add the event AUE_audit_recovery to indicated when an audit trail file has
+ been recovered from not being properly terminated. This event is stored
+ in the new audit trail file and includes the path of recovered audit trail
+ file.
+- Mac OS X and FreeBSD dependent code in auditd.c is separated into
+ auditd_darwin.c and auditd_fbsd.c files.
+- Add an event for the posix_spawn(2) and fsgetpath(2) Mac OS X system calls.
+- For Mac OS X, we use ASL(3) instead of syslog(3) for logging.
+- Add support for NOTICE level logging.
+
+OpenBSM 1.1 alpha 3
+
+- Add two new functions, au_bsm_to_errno() and au_errno_to_bsm(), to map
+ between BSM error numbers (largely the Solaris definitions) and local
+ errno(2) values for 32-bit and 64-bit return tokens. This is required as
+ operating systems don't agree on some of the values of more recent error
+ numbers.
+- Fix a bug how au_to_exec_args(3) and au_to_exec_env(3) calculates the total
+ size for the token. This bug resulted in "unknown" tokens being printed
+ after the exec args/env tokens.
+- Support for AUT_SOCKET_EX extended socket tokens, which describe a socket
+ using a pair of IPv4/IPv6 and port tuples.
+- OpenBSM BSM file header version bumped for 1.1 release.
+- Deprecated Darwin constants, such as TRAILER_PAD_MAGIC, removed.
+
+OpenBSM 1.1 alpha 2
+
+- Include files in OpenBSM are now broken out into two parts: library builds
+ required solely for user space, and system includes, which may also be
+ required for use in the kernels of systems integrating OpenBSM. Submitted
+ by Stacey Son.
+- Configure option --with-native-includes allows forcing the use of native
+ include for system includes, rather than the versions bundled with OpenBSM.
+ This is intended specifically for platforms that ship OpenBSM, have adapted
+ versions of the system includes in a kernel source tree, and will use the
+ OpenBSM build infrastructure with an unmodified OpenBSM distribution,
+ allowing the customized system includes to be used with the OpenBSM build.
+ Submitted by Stacey Son.
+- Various strcpy()'s/strcat()'s have been changed to strlcpy()'s/strlcat()'s
+ or asprintf(). Added compat/strlcpy.h for Linux.
+- Remove compatibility defines for old Darwin token constant names; now only
+ BSM token names are provided and used.
+- Add support for extended header tokens, which contain space for information
+ on the host generating the record.
+- Add support for setting extended host information in the kernel, which is
+ used for setting host information in extended header tokens. The
+ audit_control file now supports a "host" parameter which can be used by
+ auditd to set the information; if not present, the kernel parameters won't
+ be set and auditd uses unextended headers for records that it generates.
+
+OpenBSM 1.1 alpha 1
+
+- Add option to auditreduce(1) which allows users to invert sense of
+ matching, such that BSM records that do not match, are selected.
+- Fix bug in audit_write() where we commit an incomplete record in the
+ event there is an error writing the subject token. This was submitted
+ by Diego Giagio.
+- Build support for Mac OS X 10.5.1 submitted by Eric Hall.
+- Fix a bug which resulted in host XML attributes not being printed
+ while processing extended header tokens. This patch was submitted by
+ Martin Voros.
+- Constification of function arguments so that const strings can be passed
+ as arguments to tokens. This patch was submitted by Xin LI.
+- Modify the -m option so users can select more then one audit event.
+- For Mac OS X, added Mach IPC support for audit trigger messages.
+- Fixed a bug in getacna() which resulted in a locking problem on Mac OS X.
+- Added LOG_PERROR flag to openlog when -d option is used with auditd.
+- AUE events added for Mac OS X Leopard system calls.
+
+OpenBSM 1.0
+
+- Fix bug in auditreduce(1) which resulted in a memory fault/crash when
+ the user specified an event name with -m.
+- Remove AU_.* hard-coded audit class constants, as audit classes are now
+ entirely dynamically configured using /etc/security/audit_class.
+
+OpenBSM 1.0 alpha 15
+
+- Fix bug when processing in_addr_ex tokens.
+- Restore the behavior of printing the string/text specified while
+ auditing arg32 tokens.
+- Synchronized audit event list to Solaris, picking up the *at(2) system call
+ definitions, now required for FreeBSD and Linux. Added additional events
+ for *at(2) system calls not present in Solaris.
+- Bugs in auditreduce(1) fixed allowing partial date strings to be used in
+ filtering events.
+
+OpenBSM 1.0 alpha 14
+
+- Fix endian issues when processing IPv6 addresses for extended subject
+ and process tokens.
+- gcc41 warnings clean.
+- Teach audit_submit(3) about getaudit_addr(2).
+- Add support for zonename tokens.
+
+OpenBSM 1.0 alpha 13
+
+- compat/clock_gettime.h now provides a compatibility implementation of
+ clock_gettime(), which fixes building on Mac OS X.
+- Countless man page improvements, markup fixes, content fixs, etc.
+- XML printing support via "praudit -x".
+- audit.log.5 expanded to include additional BSM token types.
+- Added encoding and decoding routines for process64_ex, process32_ex,
+ subject32_ex, header64, and attr64 tokens.
+- Additional audit event identifiers for listen, mlockall/munlockall,
+ getpath, POSIX message queues, and mandatory access control.
+
+OpenBSM 1.0 alpha 12
+
+- Correct bug in auditreduce which prevented the -c option from working
+ correctly when the user specifies to process successful or failed events.
+ The problem stemmed from not having access to the return token at the time
+ the initial preselection occurred, but now a second preselection process
+ occurs while processing the return token.
+- getacfilesz(3) API added to read new audit_control(5) filesz setting,
+ which auditd(8) now sets the kernel audit trail rotation size to.
+- auditreduce(1) now uses stdin if no file names are specified on the command
+ line; this was the documented behavior previously, but it was not
+ implemented. Be more specific in auditreduce(1)'s examples section about
+ what might be done with the output of auditreduce.
+- Add audit_warn(5) closefile event so that administrators can hook
+ termination of an audit trail file. For example, this might be used to
+ compress the trail file after it is closed.
+- auditreduce(1) now uses regular expressions for pathname matching. Users can
+ now supply one or more (comma delimited) regular expressions for searching
+ the pathnames. If one of the regular expressions is prefixed with a tilde
+ (~), and a path matches, it will be excluded from the search results.
+
+OpenBSM 1.0 alpha 11
+
+- Reclassify certain read/write operations as having no class rather than the
+ fr/fw class; our default classes audit intent (open) not operations (read,
+ write).
+- Introduce AUE_SYSCTL_WRITE event so that BSD/Darwin systems can audit reads
+ and writes of sysctls as separate events. Add additional kernel
+ environment and jail events for FreeBSD.
+- Break AUDIT_TRIGGER_OPEN_NEW into two events, AUDIT_TRIGGER_ROTATE_USER
+ (issued by the user audit(8) tool) and AUDIT_TRIGGER_ROTATE_KERNEL (issued
+ by the kernel audit implementation) so that they can be distinguished.
+- Disable rate limiting of rotate requests; as the kernel doesn't retransmit
+ a dropped request, the log file will otherwise grow indefinitely if the
+ trigger is dropped.
+- Improve auditd debugging output.
+- Fix a number of threading related bugs in audit_control file reading
+ routines.
+- Add APIs au_poltostr() and au_strtopol() to convert between text
+ representations of audit_control policy flags and the flags passed to
+ auditon(A_SETPOLICY) and retrieved from auditon(A_GETPOLICY).
+- Add API getacpol() to return the 'policy:' entry from audit_control, an
+ extension to the Solaris file format to allow specification of policy
+ persistent flags.
+- Update audump to print the audit_control policy field.
+- Update auditd to read the audit_control policy field and set the kernel
+ policy to match it when configuring/reconfiguring. Remove the -s and -h
+ arguments as these policies are now set via the configuration file. If a
+ policy line is not found in the configuration file, continue with the
+ current default of setting AUDIT_CNT.
+- Fix bugs in the parsing of large execve(2) arguments and environmental
+ variable tokens; increase maximum parsed argument and variable count.
+- configure now detects strlcat(), used by policy-related functions.
+- Reference token and record sample files added to test tree.
+
+OpenBSM 1.0 alpha 10
+
+- auditd now generates complete audit records for its events, as required for
+ application-submitted audit records in the FreeBSD kernel audit
+ implementation.
+
+OpenBSM 1.0 alpha 9
+
+- Rename many OpenBSM-specific constants and API elements containing the
+ strings "BSM" and "bsm" to "AUDIT" and "audit", observing that this is true
+ for almost all existing constants and APIs.
+- Instead of passing a per-instance cookie directly into all audit filter
+ APIs, pass in the audit filter daemon state pointer, which is then used by
+ the module using an audit_filter_{get,set}cookie() API. This will allow
+ future service APIs provided by the filter daemon to maintain their own
+ state -- for example, per-module preselection state.
+
+OpenBSM 1.0 alpha 8
+
+- Correct typo in definition of AUR_INT.
+- Adopt OpenSolaris constant values for AUDIT_* configuration flags.
+- Arguments to au_to_exec_args() and au_to_exec_env() no longer const.
+- Add kernel versions of au_to_exec_args() and au_to_exec_env().
+- Fix exec argument type that is printed for env strings from 'arg' to 'env'.
+- New OpenBSM token version number assigned, constants added for other
+ commonly seen version numbers.
+- OpenBSM-specific events assigned numbers in the 43xxx range to avoid future
+ collisions with Solaris. Darwin events renamed to AUE_DARWIN_foo, as they
+ are now deprecated numberings.
+- autoconf now detects clock_gettime(), which is not available on Darwin.
+- praudit output fixes relating to arg32 and arg64 tokens.
+- Maximum record size updated to 64k-1 to match Solaris record size limit.
+- Various style and comment cleanups in include files.
+
+OpenBSM 1.0 alpha 7
+
+- Adopted Solaris-compatible format for subject32_ex and subject64_ex
+ tokens, which previously did not correctly implement variable length
+ address storage.
+- Prefer inttypes.h to stdint.h; enhance queue.h detection to test for
+ TAILQ_FOREACH_SAFE(), which is present in recent BSD queue.h's, but not
+ older ones. OpenBSM now builds on some FreeBSD 4.x versions.
+- New event types for extended attributes, ACLs, and scheduling.
+
+OpenBSM 1.0 alpha 6
+
+- Use AU_TO_WRITE and AU_NO_TO_WRITE for the 'keep' argument to au_close();
+ previously we used hard-coded 0 and 1 values.
+- Add man page for au_open(), au_write(), au_close(), and
+ au_close_buffer().
+- Support a more complete range of data types for the arbitrary data token:
+ add AUR_CHAR (alias to AUR_BYTE), remove AUR_LONG, add AUR_INT32 (alias
+ to AUR_INT), add AUR_INT64.
+- Add au_close_token(), which allows writing a single token_t to a memory
+ buffer. Not likely to be used much by applications, but useful for
+ writing test tools.
+- Modify au_to_file() so that it accepts a timeval in user space, not just
+ kernel -- this is not a Solaris BSM API so can be modified without
+ causing compatibility issues.
+- Define a new API, au_to_header32_tm(), which adds a struct timeval
+ argument to the ordinary au_to_header32(), which is now implemented by
+ wrapping au_to_header32_tm() and calling gettimeofday(). #ifndef KERNEL
+ the APIs that invoke gettimeofday(), rather than having a variable
+ definition. Don't try to retrieve time zone information using
+ gettimeofday(), as it's not needed, and introduces possible failure
+ modes.
+- Don't perform byte order transformations on the addr/machine fields of
+ the terminal ID that appears in the process32/subject32 tokens. These
+ are assumed to be IP addresses, and as such, to be in network byte
+ order.
+- Universally, APIs now assume that IP addresses and ports are provided
+ in network byte order. APIs now generally provide these types in
+ network byte order when decoding.
+- Beginnings of an OpenBSM test framework can now be found in openbsm/test.
+ This code is not built or installed by default.
+- auditd now assigns more appropriate syslog levels to its debugging and
+ error information.
+- Support for audit filters introduced: audit filters are dynamically
+ loaded shared objects that run in the context of a new daemon,
+ auditfilterd. The daemon reads from an audit pipe and feeds both BSM and
+ parsed versions of records to shared objects using a module API. This
+ will provide a framework for the writing of intrusion detection services.
+- New utility API, audit_submit(), added to capture common elements of audit
+ record submission for many applications.
+
+OpenBSM 1.0 alpha 5
+
+- Update install notes to indicate /etc files are to be installed manually.
+- On systems without LOG_SECURITY, use LOG_AUTH.
+- Convert to autoconf/automake in order to move to a more portable (not
+ BSD-specific) build infrastructure, and more easy conditional building of
+ components. Currently, the primary feature loss is that automake does
+ not have native support for manual symlinks. This will be addressed in a
+ future OpenBSM release.
+- Add compat/queue.h, to be used on systems dated BSD queue macro libraries
+ (as found on Linux).
+- Rename CHANGELOG to HISTORY, as our change log doesn't follow some of the
+ existing conventions for a CHANGELOG.
+- Some private data structures moved from audit.h to audit_internal.h to
+ prevent inappropriate use by applications and name space pollution.
+- Improved detection and use of endian macros using autoconf.
+- Avoid non-portable use of struct in6_addr, which is largely opaque.
+- Avoid leaking BSD kernel socket related token code to user space in
+ bsm_token.c.
+- Teach System V IPC calls to look for Linux naming variations for certain
+ struct ipc_perm fields.
+- Test for audit system calls, and if not present, don't build
+ bsm_wrappers.c, bsm_notify.c, audit(8), and auditd(8), which rely on
+ those system calls.
+- au_close() is not implemented on systems that don't have audit system
+ calls, but au_close_buffer() is.
+- Work around missing BSDisms in bsm_wrapper.c.
+- Fix nested includes so including libbsm.h in an application on Linux
+ picks up the necessary definitions.
+
+OpenBSM 1.0 alpha 4
+
+- Remove "audit" user example from audit_user, as it's not present on most
+ systems.
+- Add cannot_audit() function non-Darwin systems that wraps auditon();
+ required by OpenSSH BSM support. Convert Darwin cannot_audit() into a
+ function rather than a macro.
+- Library build fixed on Darwin following include file tweaks. The native
+ Darwin sys/audit.h conflicts with bsm/audit.h due to duplicate types, so
+ for now we force bsm_wrappers.c to not perform a nested include of
+ sys/audit.h.
+
+OpenBSM 1.0 alpha 3
+
+- Man page formatting, cross reference, mlinks, and accuracy improvements.
+- auditd and tools now compile and run on FreeBSD/arm.
+- auditd will now fchown() the trail file to the audit review group, if
+ defined at compile-time.
+- Added AUE_SYSARCH for FreeBSD.
+- Definition of AUE_SETFSGID fixed for Linux.
+
+OpenBSM 1.0 alpha 2
+
+- Man page formatting improvements.
+- A number of new audit event identifiers for FreeBSD, Linux, and POSIX.1b
+ events.
+- Remove 'tfm' class, unused in OpenBSM.
+
+OpenBSM 1.0 alpha 1
+
+- Import of Darwin74 BSM drop
+- Use 'syslog' for audit log warnings, rather than echoing to a file in
+ audit_warn.
+- Compile using BSD make infrastructure.
+- Integrate bsm/ include files from Darwin74 XNU drop into OpenBSM.
+- Narrow set of symbols and defines that are exposed in user space: don't
+ compile in code relying on kernel-only types such as 'struct socket'.
+- Add README, including basic build documentation.
+- Compilation of Apple-specific notify and Machroutines now #ifdef __APPLE__.
+- Staticize libbsm global variables to avoid leakage into applications.
+- Add free_au_user_ent() so that au_user_ent's don't have to be leaked.
+- Clean up bogus nul-termination checks in libbsm.
+- Add libbsm API man pages: au_class.3 au_control.3 au_event.3
+ au_free_token.3 au_io.3 au_mask.3 au_token.3 au_user.3 libbsm.3.
+- Add man pages for BSM system calls: audit.2 auditctl.2 auditon.2 getaudit.2
+ getauid.2 setaudit.2 setauid.2
+- Modify various libbsm interfaces to more consistently return 'errno' values
+ on failure.
+- Break out au_close() into constituent parts, allowing records to be written
+ to memory as well as files.
+- Prefix various defines with 'BSM_' to reduce name space pollution.
+- Added audit_internal.h, which can be used by a kernel audit implementation
+ wanting to rely on libbsm components.
+- Build with warnings, and eliminate warnings.
+- Make libbsm endian-independent, storing and reading BSM are big endian
+ (network byte order) rather than native byte order. More consistently
+ print IP addresses using the IP address print routine. These changes
+ make use of sys/endian.h from *BSD; since this isn't present on Darwin,
+ add it to OpenBSM as compat/endian.h, which is used only on Darwin.
+- Import of Darwin80 BSM drop, including 64-bit file IDs, better
+ documentation of private APIs, and bug fixes.
+- White space cleanup.
+- Add audit.log.5, a first cut at a man page documenting the BSM file format.
+- Teach au_read_rec() to recognize stand-alone file tokens, which are present
+ at the beginning and end of Solaris audit trails. Technically, these
+ appear to violate the high level BSM spec, which suggests that all tokens
+ are present in records, but need to be supported.
+- Implement HEADER64, ATTR64, SUBJECT64 token types, which make it possible
+ to run praudit(1) on basic Solaris BSM streams.
+- Switched to Solaris spelling of token names; Darwin spellings are now
+ deprecated and will be removed in a future version of OpenBSM.
+- Adopt Solaris model for representing IPv4 and IPv6 addresses.
+- Prefer C99 types.
+- Attempt to universally adopt the BSD style(9) coding style for
+ consistency.
+- auditreduce(1) now has a usage message.
+- Update support for auditctl(2) system call to support FreeBSD.
+- Add support for /dev/audit as the trigger source on FreeBSD.
+- Add additional event types for Darwin, FreeBSD, and Solaris. Annotate
+ conflicts (there are a few, unfortunately). Correct spellings, comment,
+ sort, etc. These include {get,set}res[ug]id(), sendfile(), lchflags(),
+ eaccess(), kqueue(), kevent(), poll(), lchmod().
+- Relicensed under a BSD license, many thanks to Apple, Inc!
+- Many bug fixes, cleanups, thread safety in the class, control, event,
+ and user system audit databases. Annotate some persisting atomicity
+ bugs associated with the API and implementation.
+- Add audump test tool.
+- Adopt OpenSolaris BSM API memory semantics: caller allocates memory,
+ or static memory is returned for non-_r() versions of API calls.
+ _free() calls dropped as a result, and source code compatibility with
+ OpenSolaris improved significantly.
+- Annotate BSM events with origin OS and compatibility information.
+- auditd(8), audit(8) added to the OpenBSM distribution. auditd extended
+ to support reloading of kernel event table.
+- Allow comments in /etc/security configuration files.
Deleted: vendor/openbsm/1.2_alpha4/README
===================================================================
--- vendor/openbsm/dist/README 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/README 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,114 +0,0 @@
-OpenBSM 1.0
-
- Introduction
-
-OpenBSM provides an open source implementation of Sun's BSM Audit API.
-Originally created under contract to Apple Computer by McAfee Research, this
-implementation is now maintained by volunteers and the generous contribution
-of several organizations. Coupled with a kernel audit implementation,
-OpenBSM can be used to maintain system audit streams, and is a foundation for
-an Audit-enabled system. Portions of OpenBSM, including include files and
-token-building routines, are reusable in a kernel audit implementation, and
-may be found in the FreeBSD and Mac OS X kernels.
-
- Contents
-
-OpenBSM consists of several directories:
-
- bin/ Audit-related command line tools
- bsm/ System include files for BSM
- compat/ Compatibility code to build on various OS's
- etc/ Sample /etc/security configuration files
- libbsm/ Implementation of BSM library interfaces and man pages
- man/ System call and configuration file man pages
- modules/ Directory for auditfilterd module source
- test/ Test token sets and geneneration program
- tools/ Tool directory, including audump to dump databases
-
-The following programs are included with OpenBSM:
-
- audit Command line audit control tool
- auditd Audit management daemon
- auditfilterd Experimental event monitoring framework
- auditreduce Audit trail reduction tool
- audump Debugging tool to parse and print audit databases
- praudit Tool to print audit trails
-
- Building
-
-OpenBSM is currently built using autoconf and automake, which should allow
-for building on a range of operating systems, including FreeBSD, Mac OS X,
-and Linux. Depending on the availability of audit facilities in the
-underlying operating system, some components that depend on kernel audit
-support are built conditionally. Typically, build will be performed using:
-
- ./configure
- make
-
-To install, use:
-
- make install
-
-You may wish to specify that the OpenBSM components not be installed in the
-base system, rather in a specific directory. This may be done using the
---prefix argument to configure. If installing to a specific directory,
-remember to update your library path so that running tools from that
-directory the correct libbsm is used:
-
- ./configure --prefix=/home/rwatson/openbsm
- make
- make install
- LD_LIBRARY_PATH=/home/rwatson/openbsm/libbsm ; export LD_LIBRARY_PATH
-
-You will need to manually propagate openbsm/etc/* into /etc on your system;
-this is not done automatically so as to avoid disrupting the current
-configuration. Currently, the locations of these files is not configurable.
-
- Credits
-
-The following organizations and individuals have contributed substantially to
-the development of OpenBSM:
-
- Apple Computer, Inc.
- McAfee Research, McAfee, Inc.
- SPARTA, Inc.
- Robert Watson
- Wayne Salamon
- Suresh Krishnaswamy
- Kevin Van Vechten
- Tom Rhodes
- Wojciech Koszek
- Chunyang Yuan
- Poul-Henning Kamp
- Christian Brueffer
- Olivier Houchard
- Christian Peron
- Martin Fong
- Pawel Worach
- Martin Englund
- Ruslan Ermilov
- Martin Voros
- Diego Giagio
- Alex Samorukov
-
-In addition, Coverity, Inc.'s Prevent(tm) static analysis tool and Gimpel
-Software's FlexeLint tool were used to identify a number of bugs in the
-OpenBSM implementation.
-
- Contributions
-
-The TrustedBSD Project would appreciate the contribution of bug fixes,
-enhancements, etc, under identically or substantially similar licenses to
-those present on the remainder of the OpenBSM source code.
-
- Location
-
-Information on OpenBSM may be found on the OpenBSM home page:
-
- http://www.OpenBSM.org/
-
-Information on TrustedBSD may be found on the TrustedBSD home page:
-
- http://www.TrustedBSD.org/
-
-$P4: //depot/projects/trustedbsd/openbsm/README#24 $
Copied: vendor/openbsm/1.2_alpha4/README (from rev 11163, vendor/openbsm/dist/README)
===================================================================
--- vendor/openbsm/1.2_alpha4/README (rev 0)
+++ vendor/openbsm/1.2_alpha4/README 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,66 @@
+OpenBSM
+
+ Introduction
+
+OpenBSM is an open source implementation of Sun's BSM event auditing file
+format and API. Originally created for Apple Computer by McAfee Research,
+OpenBSM is now maintained by volunteers and through the generous contribution
+of several organizations.
+
+OpenBSM includes several command line tools, including auditreduce(8) and
+praudit(8) for reducing and printing audit trails, as well as the libbsm(3)
+library to manage configuration files, generate audit records, and parse and
+print audit trails.
+
+Coupled with a kernel audit implementation, OpenBSM can be used to maintain
+system audit streams, and is a foundation for a full audit-enabled system.
+Portions of OpenBSM, including include files and token-building routines, are
+reusable in a kernel audit implementation, and may be found in the FreeBSD
+and Mac OS X kernels.
+
+ Contents
+
+OpenBSM consists of several directories:
+
+ bin/ Audit-related command line tools
+ bsm/ Library include files for BSM
+ compat/ Compatibility code to build on various operating systems
+ etc/ Sample /etc/security configuration files
+ libauditd Common audit management functions for auditd and launchd
+ libbsm/ Implementation of BSM library interfaces and man pages
+ man/ System call and configuration file man pages
+ modules/ Directory for auditfilterd module source
+ sys/ System include files for BSM
+ test/ Test token sets and geneneration program
+ tools/ Tool directory, including audump to dump databases
+
+The following programs are included with OpenBSM:
+
+ audit Command line audit control tool
+ auditd Audit management daemon
+ auditdistd Audit trail distribution daemon
+ auditfilterd Experimental event monitoring framework
+ auditreduce Audit trail reduction tool
+ audump Debugging tool to parse and print audit databases
+ praudit Tool to print audit trails
+
+ Build and Installation
+
+Please see the file INSTALL for build and installation instructions.
+
+ Contributions
+
+The TrustedBSD Project would appreciate the contribution of bug fixes,
+enhancements, etc, under identically or substantially similar licenses to
+those present on the remainder of the OpenBSM source code. Please see the
+file CREDITS to learn more about who has contributed to the project.
+
+ Location
+
+Information on OpenBSM may be found on the OpenBSM home page:
+
+ http://www.OpenBSM.org/
+
+Information on TrustedBSD may be found on the TrustedBSD home page:
+
+ http://www.TrustedBSD.org/
Deleted: vendor/openbsm/1.2_alpha4/TODO
===================================================================
--- vendor/openbsm/dist/TODO 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/TODO 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,22 +0,0 @@
-- Teach libbsm about any additional 64-bit token types that are present
- in more recent Solaris versions.
-- Build a regression test suite for libbsm that generates each token
- type and then compares the results with known good data. Make sure to
- test that things work properly with respect to endianness of the local
- platform.
-- Document contents of libbsm "public" data structures in libbsm man pages.
-- The audit.log.5 man page is incomplete, as it does not describe all
- token types.
-- With the move to autoconf/automake, man page symlinks are no longer
- installed. This needs to be fixed.
-- It might be desirable to be able to provide EOPNOTSUPP system call stubs
- on systems that don't have the necessary audit system calls; that would
- allow the full libbsm and tool set to build, just not run.
-- Teach praudit how to begin printing at any point in a token stream, not
- just at the beginning of a record. This will make it easier to use
- praudit in test suites processing single-token files without header and
- trailer context.
-- Put hostname in trail file name.
-- Document audit_warn event arguments.
-
-$P4: //depot/projects/trustedbsd/openbsm/TODO#9 $
Copied: vendor/openbsm/1.2_alpha4/TODO (from rev 11163, vendor/openbsm/dist/TODO)
===================================================================
--- vendor/openbsm/1.2_alpha4/TODO (rev 0)
+++ vendor/openbsm/1.2_alpha4/TODO 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,23 @@
+OpenBSM TODO
+
+- Build a regression test suite for libbsm that generates each token
+ type and then compares the results with known good data. Make sure to
+ test that things work properly with respect to endianness of the local
+ platform.
+- Document contents of libbsm "public" data structures in libbsm man pages.
+- The audit.log.5 man page is incomplete, as it does not describe all
+ token types.
+- It might be desirable to be able to provide EOPNOTSUPP system call stubs
+ on systems that don't have the necessary audit system calls; that would
+ allow the full libbsm and tool set to build, just not run.
+- Teach praudit how to begin printing at any point in a token stream, not
+ just at the beginning of a record. This will make it easier to use
+ praudit in test suites processing single-token files without header and
+ trailer context.
+- Document audit_warn event arguments.
+- Allow the path /etc/security to be configured at configure-time so that
+ alternative locations can be used.
+- NLS support for au_strerror(3), which provides error strings for BSM errors
+ not available on the local OS platform.
+- Support for client certificates in auditdistd, to include certificate chain
+ validation.
Deleted: vendor/openbsm/1.2_alpha4/VERSION
===================================================================
--- vendor/openbsm/dist/VERSION 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/VERSION 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1 +0,0 @@
-OPENBSM_1_0
Copied: vendor/openbsm/1.2_alpha4/VERSION (from rev 11163, vendor/openbsm/dist/VERSION)
===================================================================
--- vendor/openbsm/1.2_alpha4/VERSION (rev 0)
+++ vendor/openbsm/1.2_alpha4/VERSION 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1 @@
+OPENBSM_1_2_alpha4
Deleted: vendor/openbsm/1.2_alpha4/aclocal.m4
===================================================================
--- vendor/openbsm/dist/aclocal.m4 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/aclocal.m4 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,7456 +0,0 @@
-# generated automatically by aclocal 1.10 -*- Autoconf -*-
-
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005, 2006 Free Software Foundation, Inc.
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-m4_if(m4_PACKAGE_VERSION, [2.61],,
-[m4_fatal([this file was generated for autoconf 2.61.
-You have another version of autoconf. If you want to use that,
-you should regenerate the build system entirely.], [63])])
-
-# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
-
-# serial 51 AC_PROG_LIBTOOL
-
-
-# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED)
-# -----------------------------------------------------------
-# If this macro is not defined by Autoconf, define it here.
-m4_ifdef([AC_PROVIDE_IFELSE],
- [],
- [m4_define([AC_PROVIDE_IFELSE],
- [m4_ifdef([AC_PROVIDE_$1],
- [$2], [$3])])])
-
-
-# AC_PROG_LIBTOOL
-# ---------------
-AC_DEFUN([AC_PROG_LIBTOOL],
-[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl
-dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX
-dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX.
- AC_PROVIDE_IFELSE([AC_PROG_CXX],
- [AC_LIBTOOL_CXX],
- [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX
- ])])
-dnl And a similar setup for Fortran 77 support
- AC_PROVIDE_IFELSE([AC_PROG_F77],
- [AC_LIBTOOL_F77],
- [define([AC_PROG_F77], defn([AC_PROG_F77])[AC_LIBTOOL_F77
-])])
-
-dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly.
-dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run
-dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both.
- AC_PROVIDE_IFELSE([AC_PROG_GCJ],
- [AC_LIBTOOL_GCJ],
- [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
- [AC_LIBTOOL_GCJ],
- [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],
- [AC_LIBTOOL_GCJ],
- [ifdef([AC_PROG_GCJ],
- [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])
- ifdef([A][M_PROG_GCJ],
- [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ])])
- ifdef([LT_AC_PROG_GCJ],
- [define([LT_AC_PROG_GCJ],
- defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])])])
-])])# AC_PROG_LIBTOOL
-
-
-# _AC_PROG_LIBTOOL
-# ----------------
-AC_DEFUN([_AC_PROG_LIBTOOL],
-[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_F77])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl
-
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-AC_SUBST(LIBTOOL)dnl
-
-# Prevent multiple expansion
-define([AC_PROG_LIBTOOL], [])
-])# _AC_PROG_LIBTOOL
-
-
-# AC_LIBTOOL_SETUP
-# ----------------
-AC_DEFUN([AC_LIBTOOL_SETUP],
-[AC_PREREQ(2.50)dnl
-AC_REQUIRE([AC_ENABLE_SHARED])dnl
-AC_REQUIRE([AC_ENABLE_STATIC])dnl
-AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_PROG_LD])dnl
-AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
-AC_REQUIRE([AC_PROG_NM])dnl
-
-AC_REQUIRE([AC_PROG_LN_S])dnl
-AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
-# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
-AC_REQUIRE([AC_OBJEXT])dnl
-AC_REQUIRE([AC_EXEEXT])dnl
-dnl
-
-AC_LIBTOOL_SYS_MAX_CMD_LEN
-AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
-AC_LIBTOOL_OBJDIR
-
-AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
-_LT_AC_PROG_ECHO_BACKSLASH
-
-case $host_os in
-aix3*)
- # AIX sometimes has problems with the GCC collect2 program. For some
- # reason, if we set the COLLECT_NAMES environment variable, the problems
- # vanish in a puff of smoke.
- if test "X${COLLECT_NAMES+set}" != Xset; then
- COLLECT_NAMES=
- export COLLECT_NAMES
- fi
- ;;
-esac
-
-# Sed substitution that helps us do robust quoting. It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed='sed -e 1s/^X//'
-[sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g']
-
-# Same as above, but do not quote variable references.
-[double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g']
-
-# Sed substitution to delay expansion of an escaped shell variable in a
-# double_quote_subst'ed string.
-delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
-
-# Sed substitution to avoid accidental globbing in evaled expressions
-no_glob_subst='s/\*/\\\*/g'
-
-# Constants:
-rm="rm -f"
-
-# Global variables:
-default_ofile=libtool
-can_build_shared=yes
-
-# All known linkers require a `.a' archive for static linking (except MSVC,
-# which needs '.lib').
-libext=a
-ltmain="$ac_aux_dir/ltmain.sh"
-ofile="$default_ofile"
-with_gnu_ld="$lt_cv_prog_gnu_ld"
-
-AC_CHECK_TOOL(AR, ar, false)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-AC_CHECK_TOOL(STRIP, strip, :)
-
-old_CC="$CC"
-old_CFLAGS="$CFLAGS"
-
-# Set sane defaults for various variables
-test -z "$AR" && AR=ar
-test -z "$AR_FLAGS" && AR_FLAGS=cru
-test -z "$AS" && AS=as
-test -z "$CC" && CC=cc
-test -z "$LTCC" && LTCC=$CC
-test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
-test -z "$DLLTOOL" && DLLTOOL=dlltool
-test -z "$LD" && LD=ld
-test -z "$LN_S" && LN_S="ln -s"
-test -z "$MAGIC_CMD" && MAGIC_CMD=file
-test -z "$NM" && NM=nm
-test -z "$SED" && SED=sed
-test -z "$OBJDUMP" && OBJDUMP=objdump
-test -z "$RANLIB" && RANLIB=:
-test -z "$STRIP" && STRIP=:
-test -z "$ac_objext" && ac_objext=o
-
-# Determine commands to create old-style static archives.
-old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
-old_postinstall_cmds='chmod 644 $oldlib'
-old_postuninstall_cmds=
-
-if test -n "$RANLIB"; then
- case $host_os in
- openbsd*)
- old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
- ;;
- *)
- old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
- ;;
- esac
- old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
-fi
-
-_LT_CC_BASENAME([$compiler])
-
-# Only perform the check for file, if the check method requires it
-case $deplibs_check_method in
-file_magic*)
- if test "$file_magic_cmd" = '$MAGIC_CMD'; then
- AC_PATH_MAGIC
- fi
- ;;
-esac
-
-AC_PROVIDE_IFELSE([AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no)
-AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
-enable_win32_dll=yes, enable_win32_dll=no)
-
-AC_ARG_ENABLE([libtool-lock],
- [AC_HELP_STRING([--disable-libtool-lock],
- [avoid locking (might break parallel builds)])])
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
-
-AC_ARG_WITH([pic],
- [AC_HELP_STRING([--with-pic],
- [try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
- [pic_mode="$withval"],
- [pic_mode=default])
-test -z "$pic_mode" && pic_mode=default
-
-# Use C for the default configuration in the libtool script
-tagname=
-AC_LIBTOOL_LANG_C_CONFIG
-_LT_AC_TAGCONFIG
-])# AC_LIBTOOL_SETUP
-
-
-# _LT_AC_SYS_COMPILER
-# -------------------
-AC_DEFUN([_LT_AC_SYS_COMPILER],
-[AC_REQUIRE([AC_PROG_CC])dnl
-
-# If no C compiler was specified, use CC.
-LTCC=${LTCC-"$CC"}
-
-# If no C compiler flags were specified, use CFLAGS.
-LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-
-# Allow CC to be a program name with arguments.
-compiler=$CC
-])# _LT_AC_SYS_COMPILER
-
-
-# _LT_CC_BASENAME(CC)
-# -------------------
-# Calculate cc_basename. Skip known compiler wrappers and cross-prefix.
-AC_DEFUN([_LT_CC_BASENAME],
-[for cc_temp in $1""; do
- case $cc_temp in
- compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
- distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
- \-*) ;;
- *) break;;
- esac
-done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-])
-
-
-# _LT_COMPILER_BOILERPLATE
-# ------------------------
-# Check for compiler boilerplate output or warnings with
-# the simple compiler test code.
-AC_DEFUN([_LT_COMPILER_BOILERPLATE],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_compile_test_code" >conftest.$ac_ext
-eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_compiler_boilerplate=`cat conftest.err`
-$rm conftest*
-])# _LT_COMPILER_BOILERPLATE
-
-
-# _LT_LINKER_BOILERPLATE
-# ----------------------
-# Check for linker boilerplate output or warnings with
-# the simple link test code.
-AC_DEFUN([_LT_LINKER_BOILERPLATE],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_link_test_code" >conftest.$ac_ext
-eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_linker_boilerplate=`cat conftest.err`
-$rm conftest*
-])# _LT_LINKER_BOILERPLATE
-
-
-# _LT_AC_SYS_LIBPATH_AIX
-# ----------------------
-# Links a minimal program and checks the executable
-# for the system default hardcoded library path. In most cases,
-# this is /usr/lib:/lib, but when the MPI compilers are used
-# the location of the communication and MPI libs are included too.
-# If we don't find anything, use the default library path according
-# to the aix ld manual.
-AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
-AC_LINK_IFELSE(AC_LANG_PROGRAM,[
-lt_aix_libpath_sed='
- /Import File Strings/,/^$/ {
- /^0/ {
- s/^0 *\(.*\)$/\1/
- p
- }
- }'
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then
- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-fi],[])
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-])# _LT_AC_SYS_LIBPATH_AIX
-
-
-# _LT_AC_SHELL_INIT(ARG)
-# ----------------------
-AC_DEFUN([_LT_AC_SHELL_INIT],
-[ifdef([AC_DIVERSION_NOTICE],
- [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
- [AC_DIVERT_PUSH(NOTICE)])
-$1
-AC_DIVERT_POP
-])# _LT_AC_SHELL_INIT
-
-
-# _LT_AC_PROG_ECHO_BACKSLASH
-# --------------------------
-# Add some code to the start of the generated configure script which
-# will find an echo command which doesn't interpret backslashes.
-AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH],
-[_LT_AC_SHELL_INIT([
-# Check that we are running under the correct shell.
-SHELL=${CONFIG_SHELL-/bin/sh}
-
-case X$ECHO in
-X*--fallback-echo)
- # Remove one level of quotation (which was required for Make).
- ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
- ;;
-esac
-
-echo=${ECHO-echo}
-if test "X[$]1" = X--no-reexec; then
- # Discard the --no-reexec flag, and continue.
- shift
-elif test "X[$]1" = X--fallback-echo; then
- # Avoid inline document here, it may be left over
- :
-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then
- # Yippee, $echo works!
- :
-else
- # Restart under the correct shell.
- exec $SHELL "[$]0" --no-reexec ${1+"[$]@"}
-fi
-
-if test "X[$]1" = X--fallback-echo; then
- # used as fallback echo
- shift
- cat <<EOF
-[$]*
-EOF
- exit 0
-fi
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-if test -z "$ECHO"; then
-if test "X${echo_test_string+set}" != Xset; then
-# find a string as large as possible, as long as the shell can cope with it
- for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
- # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
- if (echo_test_string=`eval $cmd`) 2>/dev/null &&
- echo_test_string=`eval $cmd` &&
- (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
- then
- break
- fi
- done
-fi
-
-if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- :
-else
- # The Solaris, AIX, and Digital Unix default echo programs unquote
- # backslashes. This makes it impossible to quote backslashes using
- # echo "$something" | sed 's/\\/\\\\/g'
- #
- # So, first we look for a working echo in the user's PATH.
-
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
- for dir in $PATH /usr/ucb; do
- IFS="$lt_save_ifs"
- if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
- test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- echo="$dir/echo"
- break
- fi
- done
- IFS="$lt_save_ifs"
-
- if test "X$echo" = Xecho; then
- # We didn't find a better echo, so look for alternatives.
- if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- # This shell has a builtin print -r that does the trick.
- echo='print -r'
- elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
- test "X$CONFIG_SHELL" != X/bin/ksh; then
- # If we have ksh, try running configure again with it.
- ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
- export ORIGINAL_CONFIG_SHELL
- CONFIG_SHELL=/bin/ksh
- export CONFIG_SHELL
- exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
- else
- # Try using printf.
- echo='printf %s\n'
- if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- # Cool, printf works
- :
- elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
- test "X$echo_testing_string" = 'X\t' &&
- echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
- export CONFIG_SHELL
- SHELL="$CONFIG_SHELL"
- export SHELL
- echo="$CONFIG_SHELL [$]0 --fallback-echo"
- elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
- test "X$echo_testing_string" = 'X\t' &&
- echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- echo="$CONFIG_SHELL [$]0 --fallback-echo"
- else
- # maybe with a smaller string...
- prev=:
-
- for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
- if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
- then
- break
- fi
- prev="$cmd"
- done
-
- if test "$prev" != 'sed 50q "[$]0"'; then
- echo_test_string=`eval $prev`
- export echo_test_string
- exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
- else
- # Oops. We lost completely, so just stick with echo.
- echo=echo
- fi
- fi
- fi
- fi
-fi
-fi
-
-# Copy echo and quote the copy suitably for passing to libtool from
-# the Makefile, instead of quoting the original, which is used later.
-ECHO=$echo
-if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
- ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
-fi
-
-AC_SUBST(ECHO)
-])])# _LT_AC_PROG_ECHO_BACKSLASH
-
-
-# _LT_AC_LOCK
-# -----------
-AC_DEFUN([_LT_AC_LOCK],
-[AC_ARG_ENABLE([libtool-lock],
- [AC_HELP_STRING([--disable-libtool-lock],
- [avoid locking (might break parallel builds)])])
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
-
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case $host in
-ia64-*-hpux*)
- # Find out which ABI we are using.
- echo 'int i;' > conftest.$ac_ext
- if AC_TRY_EVAL(ac_compile); then
- case `/usr/bin/file conftest.$ac_objext` in
- *ELF-32*)
- HPUX_IA64_MODE="32"
- ;;
- *ELF-64*)
- HPUX_IA64_MODE="64"
- ;;
- esac
- fi
- rm -rf conftest*
- ;;
-*-*-irix6*)
- # Find out which ABI we are using.
- echo '[#]line __oline__ "configure"' > conftest.$ac_ext
- if AC_TRY_EVAL(ac_compile); then
- if test "$lt_cv_prog_gnu_ld" = yes; then
- case `/usr/bin/file conftest.$ac_objext` in
- *32-bit*)
- LD="${LD-ld} -melf32bsmip"
- ;;
- *N32*)
- LD="${LD-ld} -melf32bmipn32"
- ;;
- *64-bit*)
- LD="${LD-ld} -melf64bmip"
- ;;
- esac
- else
- case `/usr/bin/file conftest.$ac_objext` in
- *32-bit*)
- LD="${LD-ld} -32"
- ;;
- *N32*)
- LD="${LD-ld} -n32"
- ;;
- *64-bit*)
- LD="${LD-ld} -64"
- ;;
- esac
- fi
- fi
- rm -rf conftest*
- ;;
-
-x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
-s390*-*linux*|sparc*-*linux*)
- # Find out which ABI we are using.
- echo 'int i;' > conftest.$ac_ext
- if AC_TRY_EVAL(ac_compile); then
- case `/usr/bin/file conftest.o` in
- *32-bit*)
- case $host in
- x86_64-*kfreebsd*-gnu)
- LD="${LD-ld} -m elf_i386_fbsd"
- ;;
- x86_64-*linux*)
- LD="${LD-ld} -m elf_i386"
- ;;
- ppc64-*linux*|powerpc64-*linux*)
- LD="${LD-ld} -m elf32ppclinux"
- ;;
- s390x-*linux*)
- LD="${LD-ld} -m elf_s390"
- ;;
- sparc64-*linux*)
- LD="${LD-ld} -m elf32_sparc"
- ;;
- esac
- ;;
- *64-bit*)
- case $host in
- x86_64-*kfreebsd*-gnu)
- LD="${LD-ld} -m elf_x86_64_fbsd"
- ;;
- x86_64-*linux*)
- LD="${LD-ld} -m elf_x86_64"
- ;;
- ppc*-*linux*|powerpc*-*linux*)
- LD="${LD-ld} -m elf64ppc"
- ;;
- s390*-*linux*)
- LD="${LD-ld} -m elf64_s390"
- ;;
- sparc*-*linux*)
- LD="${LD-ld} -m elf64_sparc"
- ;;
- esac
- ;;
- esac
- fi
- rm -rf conftest*
- ;;
-
-*-*-sco3.2v5*)
- # On SCO OpenServer 5, we need -belf to get full-featured binaries.
- SAVE_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS -belf"
- AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
- [AC_LANG_PUSH(C)
- AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
- AC_LANG_POP])
- if test x"$lt_cv_cc_needs_belf" != x"yes"; then
- # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
- CFLAGS="$SAVE_CFLAGS"
- fi
- ;;
-sparc*-*solaris*)
- # Find out which ABI we are using.
- echo 'int i;' > conftest.$ac_ext
- if AC_TRY_EVAL(ac_compile); then
- case `/usr/bin/file conftest.o` in
- *64-bit*)
- case $lt_cv_prog_gnu_ld in
- yes*) LD="${LD-ld} -m elf64_sparc" ;;
- *) LD="${LD-ld} -64" ;;
- esac
- ;;
- esac
- fi
- rm -rf conftest*
- ;;
-
-AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
-[*-*-cygwin* | *-*-mingw* | *-*-pw32*)
- AC_CHECK_TOOL(DLLTOOL, dlltool, false)
- AC_CHECK_TOOL(AS, as, false)
- AC_CHECK_TOOL(OBJDUMP, objdump, false)
- ;;
- ])
-esac
-
-need_locks="$enable_libtool_lock"
-
-])# _LT_AC_LOCK
-
-
-# AC_LIBTOOL_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
-# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
-# ----------------------------------------------------------------
-# Check whether the given compiler option works
-AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION],
-[AC_REQUIRE([LT_AC_PROG_SED])
-AC_CACHE_CHECK([$1], [$2],
- [$2=no
- ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
- lt_compiler_flag="$3"
- # Insert the option either (1) after the last *FLAGS variable, or
- # (2) before a word containing "conftest.", or (3) at the end.
- # Note that $ac_compile itself does not contain backslashes and begins
- # with a dollar sign (not a hyphen), so the echo should work correctly.
- # The option is referenced via a variable to avoid confusing sed.
- lt_compile=`echo "$ac_compile" | $SED \
- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
- -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
- -e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
- (eval "$lt_compile" 2>conftest.err)
- ac_status=$?
- cat conftest.err >&AS_MESSAGE_LOG_FD
- echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
- if (exit $ac_status) && test -s "$ac_outfile"; then
- # The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings other than the usual output.
- $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
- if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
- $2=yes
- fi
- fi
- $rm conftest*
-])
-
-if test x"[$]$2" = xyes; then
- ifelse([$5], , :, [$5])
-else
- ifelse([$6], , :, [$6])
-fi
-])# AC_LIBTOOL_COMPILER_OPTION
-
-
-# AC_LIBTOOL_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
-# [ACTION-SUCCESS], [ACTION-FAILURE])
-# ------------------------------------------------------------
-# Check whether the given compiler option works
-AC_DEFUN([AC_LIBTOOL_LINKER_OPTION],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
-AC_CACHE_CHECK([$1], [$2],
- [$2=no
- save_LDFLAGS="$LDFLAGS"
- LDFLAGS="$LDFLAGS $3"
- echo "$lt_simple_link_test_code" > conftest.$ac_ext
- if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
- # The linker can only warn and ignore the option if not recognized
- # So say no if there are warnings
- if test -s conftest.err; then
- # Append any errors to the config.log.
- cat conftest.err 1>&AS_MESSAGE_LOG_FD
- $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
- if diff conftest.exp conftest.er2 >/dev/null; then
- $2=yes
- fi
- else
- $2=yes
- fi
- fi
- $rm conftest*
- LDFLAGS="$save_LDFLAGS"
-])
-
-if test x"[$]$2" = xyes; then
- ifelse([$4], , :, [$4])
-else
- ifelse([$5], , :, [$5])
-fi
-])# AC_LIBTOOL_LINKER_OPTION
-
-
-# AC_LIBTOOL_SYS_MAX_CMD_LEN
-# --------------------------
-AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN],
-[# find the maximum length of command line arguments
-AC_MSG_CHECKING([the maximum length of command line arguments])
-AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
- i=0
- teststring="ABCD"
-
- case $build_os in
- msdosdjgpp*)
- # On DJGPP, this test can blow up pretty badly due to problems in libc
- # (any single argument exceeding 2000 bytes causes a buffer overrun
- # during glob expansion). Even if it were fixed, the result of this
- # check would be larger than it should be.
- lt_cv_sys_max_cmd_len=12288; # 12K is about right
- ;;
-
- gnu*)
- # Under GNU Hurd, this test is not required because there is
- # no limit to the length of command line arguments.
- # Libtool will interpret -1 as no limit whatsoever
- lt_cv_sys_max_cmd_len=-1;
- ;;
-
- cygwin* | mingw*)
- # On Win9x/ME, this test blows up -- it succeeds, but takes
- # about 5 minutes as the teststring grows exponentially.
- # Worse, since 9x/ME are not pre-emptively multitasking,
- # you end up with a "frozen" computer, even though with patience
- # the test eventually succeeds (with a max line length of 256k).
- # Instead, let's just punt: use the minimum linelength reported by
- # all of the supported platforms: 8192 (on NT/2K/XP).
- lt_cv_sys_max_cmd_len=8192;
- ;;
-
- amigaos*)
- # On AmigaOS with pdksh, this test takes hours, literally.
- # So we just punt and use a minimum line length of 8192.
- lt_cv_sys_max_cmd_len=8192;
- ;;
-
- netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
- # This has been around since 386BSD, at least. Likely further.
- if test -x /sbin/sysctl; then
- lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
- elif test -x /usr/sbin/sysctl; then
- lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
- else
- lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs
- fi
- # And add a safety zone
- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
- ;;
-
- interix*)
- # We know the value 262144 and hardcode it with a safety zone (like BSD)
- lt_cv_sys_max_cmd_len=196608
- ;;
-
- osf*)
- # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
- # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
- # nice to cause kernel panics so lets avoid the loop below.
- # First set a reasonable default.
- lt_cv_sys_max_cmd_len=16384
- #
- if test -x /sbin/sysconfig; then
- case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
- *1*) lt_cv_sys_max_cmd_len=-1 ;;
- esac
- fi
- ;;
- sco3.2v5*)
- lt_cv_sys_max_cmd_len=102400
- ;;
- sysv5* | sco5v6* | sysv4.2uw2*)
- kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
- if test -n "$kargmax"; then
- lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'`
- else
- lt_cv_sys_max_cmd_len=32768
- fi
- ;;
- *)
- lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
- if test -n "$lt_cv_sys_max_cmd_len"; then
- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
- else
- SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
- while (test "X"`$SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \
- = "XX$teststring") >/dev/null 2>&1 &&
- new_result=`expr "X$teststring" : ".*" 2>&1` &&
- lt_cv_sys_max_cmd_len=$new_result &&
- test $i != 17 # 1/2 MB should be enough
- do
- i=`expr $i + 1`
- teststring=$teststring$teststring
- done
- teststring=
- # Add a significant safety factor because C++ compilers can tack on massive
- # amounts of additional arguments before passing them to the linker.
- # It appears as though 1/2 is a usable value.
- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
- fi
- ;;
- esac
-])
-if test -n $lt_cv_sys_max_cmd_len ; then
- AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
-else
- AC_MSG_RESULT(none)
-fi
-])# AC_LIBTOOL_SYS_MAX_CMD_LEN
-
-
-# _LT_AC_CHECK_DLFCN
-# ------------------
-AC_DEFUN([_LT_AC_CHECK_DLFCN],
-[AC_CHECK_HEADERS(dlfcn.h)dnl
-])# _LT_AC_CHECK_DLFCN
-
-
-# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
-# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
-# ---------------------------------------------------------------------
-AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF],
-[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
-if test "$cross_compiling" = yes; then :
- [$4]
-else
- lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
- lt_status=$lt_dlunknown
- cat > conftest.$ac_ext <<EOF
-[#line __oline__ "configure"
-#include "confdefs.h"
-
-#if HAVE_DLFCN_H
-#include <dlfcn.h>
-#endif
-
-#include <stdio.h>
-
-#ifdef RTLD_GLOBAL
-# define LT_DLGLOBAL RTLD_GLOBAL
-#else
-# ifdef DL_GLOBAL
-# define LT_DLGLOBAL DL_GLOBAL
-# else
-# define LT_DLGLOBAL 0
-# endif
-#endif
-
-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
- find out it does not work in some platform. */
-#ifndef LT_DLLAZY_OR_NOW
-# ifdef RTLD_LAZY
-# define LT_DLLAZY_OR_NOW RTLD_LAZY
-# else
-# ifdef DL_LAZY
-# define LT_DLLAZY_OR_NOW DL_LAZY
-# else
-# ifdef RTLD_NOW
-# define LT_DLLAZY_OR_NOW RTLD_NOW
-# else
-# ifdef DL_NOW
-# define LT_DLLAZY_OR_NOW DL_NOW
-# else
-# define LT_DLLAZY_OR_NOW 0
-# endif
-# endif
-# endif
-# endif
-#endif
-
-#ifdef __cplusplus
-extern "C" void exit (int);
-#endif
-
-void fnord() { int i=42;}
-int main ()
-{
- void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
- int status = $lt_dlunknown;
-
- if (self)
- {
- if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
- else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
- /* dlclose (self); */
- }
- else
- puts (dlerror ());
-
- exit (status);
-}]
-EOF
- if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
- (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
- lt_status=$?
- case x$lt_status in
- x$lt_dlno_uscore) $1 ;;
- x$lt_dlneed_uscore) $2 ;;
- x$lt_dlunknown|x*) $3 ;;
- esac
- else :
- # compilation failed
- $3
- fi
-fi
-rm -fr conftest*
-])# _LT_AC_TRY_DLOPEN_SELF
-
-
-# AC_LIBTOOL_DLOPEN_SELF
-# ----------------------
-AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF],
-[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
-if test "x$enable_dlopen" != xyes; then
- enable_dlopen=unknown
- enable_dlopen_self=unknown
- enable_dlopen_self_static=unknown
-else
- lt_cv_dlopen=no
- lt_cv_dlopen_libs=
-
- case $host_os in
- beos*)
- lt_cv_dlopen="load_add_on"
- lt_cv_dlopen_libs=
- lt_cv_dlopen_self=yes
- ;;
-
- mingw* | pw32*)
- lt_cv_dlopen="LoadLibrary"
- lt_cv_dlopen_libs=
- ;;
-
- cygwin*)
- lt_cv_dlopen="dlopen"
- lt_cv_dlopen_libs=
- ;;
-
- darwin*)
- # if libdl is installed we need to link against it
- AC_CHECK_LIB([dl], [dlopen],
- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[
- lt_cv_dlopen="dyld"
- lt_cv_dlopen_libs=
- lt_cv_dlopen_self=yes
- ])
- ;;
-
- *)
- AC_CHECK_FUNC([shl_load],
- [lt_cv_dlopen="shl_load"],
- [AC_CHECK_LIB([dld], [shl_load],
- [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"],
- [AC_CHECK_FUNC([dlopen],
- [lt_cv_dlopen="dlopen"],
- [AC_CHECK_LIB([dl], [dlopen],
- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
- [AC_CHECK_LIB([svld], [dlopen],
- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
- [AC_CHECK_LIB([dld], [dld_link],
- [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"])
- ])
- ])
- ])
- ])
- ])
- ;;
- esac
-
- if test "x$lt_cv_dlopen" != xno; then
- enable_dlopen=yes
- else
- enable_dlopen=no
- fi
-
- case $lt_cv_dlopen in
- dlopen)
- save_CPPFLAGS="$CPPFLAGS"
- test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
-
- save_LDFLAGS="$LDFLAGS"
- wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
-
- save_LIBS="$LIBS"
- LIBS="$lt_cv_dlopen_libs $LIBS"
-
- AC_CACHE_CHECK([whether a program can dlopen itself],
- lt_cv_dlopen_self, [dnl
- _LT_AC_TRY_DLOPEN_SELF(
- lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
- lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
- ])
-
- if test "x$lt_cv_dlopen_self" = xyes; then
- wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
- AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
- lt_cv_dlopen_self_static, [dnl
- _LT_AC_TRY_DLOPEN_SELF(
- lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
- lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross)
- ])
- fi
-
- CPPFLAGS="$save_CPPFLAGS"
- LDFLAGS="$save_LDFLAGS"
- LIBS="$save_LIBS"
- ;;
- esac
-
- case $lt_cv_dlopen_self in
- yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
- *) enable_dlopen_self=unknown ;;
- esac
-
- case $lt_cv_dlopen_self_static in
- yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
- *) enable_dlopen_self_static=unknown ;;
- esac
-fi
-])# AC_LIBTOOL_DLOPEN_SELF
-
-
-# AC_LIBTOOL_PROG_CC_C_O([TAGNAME])
-# ---------------------------------
-# Check to see if options -c and -o are simultaneously supported by compiler
-AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
-AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
-AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
- [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
- [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
- $rm -r conftest 2>/dev/null
- mkdir conftest
- cd conftest
- mkdir out
- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-
- lt_compiler_flag="-o out/conftest2.$ac_objext"
- # Insert the option either (1) after the last *FLAGS variable, or
- # (2) before a word containing "conftest.", or (3) at the end.
- # Note that $ac_compile itself does not contain backslashes and begins
- # with a dollar sign (not a hyphen), so the echo should work correctly.
- lt_compile=`echo "$ac_compile" | $SED \
- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
- -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
- -e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
- (eval "$lt_compile" 2>out/conftest.err)
- ac_status=$?
- cat out/conftest.err >&AS_MESSAGE_LOG_FD
- echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
- if (exit $ac_status) && test -s out/conftest2.$ac_objext
- then
- # The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings
- $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
- $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
- if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
- _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
- fi
- fi
- chmod u+w . 2>&AS_MESSAGE_LOG_FD
- $rm conftest*
- # SGI C++ compiler will create directory out/ii_files/ for
- # template instantiation
- test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
- $rm out/* && rmdir out
- cd ..
- rmdir conftest
- $rm conftest*
-])
-])# AC_LIBTOOL_PROG_CC_C_O
-
-
-# AC_LIBTOOL_SYS_HARD_LINK_LOCKS([TAGNAME])
-# -----------------------------------------
-# Check to see if we can do hard links to lock some files if needed
-AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS],
-[AC_REQUIRE([_LT_AC_LOCK])dnl
-
-hard_links="nottested"
-if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
- # do not overwrite the value of need_locks provided by the user
- AC_MSG_CHECKING([if we can lock with hard links])
- hard_links=yes
- $rm conftest*
- ln conftest.a conftest.b 2>/dev/null && hard_links=no
- touch conftest.a
- ln conftest.a conftest.b 2>&5 || hard_links=no
- ln conftest.a conftest.b 2>/dev/null && hard_links=no
- AC_MSG_RESULT([$hard_links])
- if test "$hard_links" = no; then
- AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])
- need_locks=warn
- fi
-else
- need_locks=no
-fi
-])# AC_LIBTOOL_SYS_HARD_LINK_LOCKS
-
-
-# AC_LIBTOOL_OBJDIR
-# -----------------
-AC_DEFUN([AC_LIBTOOL_OBJDIR],
-[AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
-[rm -f .libs 2>/dev/null
-mkdir .libs 2>/dev/null
-if test -d .libs; then
- lt_cv_objdir=.libs
-else
- # MS-DOS does not allow filenames that begin with a dot.
- lt_cv_objdir=_libs
-fi
-rmdir .libs 2>/dev/null])
-objdir=$lt_cv_objdir
-])# AC_LIBTOOL_OBJDIR
-
-
-# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([TAGNAME])
-# ----------------------------------------------
-# Check hardcoding attributes.
-AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH],
-[AC_MSG_CHECKING([how to hardcode library paths into programs])
-_LT_AC_TAGVAR(hardcode_action, $1)=
-if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \
- test -n "$_LT_AC_TAGVAR(runpath_var, $1)" || \
- test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then
-
- # We can hardcode non-existant directories.
- if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no &&
- # If the only mechanism to avoid hardcoding is shlibpath_var, we
- # have to relink, otherwise we might link with an installed library
- # when we should be linking with a yet-to-be-installed one
- ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
- test "$_LT_AC_TAGVAR(hardcode_minus_L, $1)" != no; then
- # Linking always hardcodes the temporary library directory.
- _LT_AC_TAGVAR(hardcode_action, $1)=relink
- else
- # We can link without hardcoding, and we can hardcode nonexisting dirs.
- _LT_AC_TAGVAR(hardcode_action, $1)=immediate
- fi
-else
- # We cannot hardcode anything, or else we can only hardcode existing
- # directories.
- _LT_AC_TAGVAR(hardcode_action, $1)=unsupported
-fi
-AC_MSG_RESULT([$_LT_AC_TAGVAR(hardcode_action, $1)])
-
-if test "$_LT_AC_TAGVAR(hardcode_action, $1)" = relink; then
- # Fast installation is not supported
- enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
- test "$enable_shared" = no; then
- # Fast installation is not necessary
- enable_fast_install=needless
-fi
-])# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH
-
-
-# AC_LIBTOOL_SYS_LIB_STRIP
-# ------------------------
-AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP],
-[striplib=
-old_striplib=
-AC_MSG_CHECKING([whether stripping libraries is possible])
-if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
- test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
- test -z "$striplib" && striplib="$STRIP --strip-unneeded"
- AC_MSG_RESULT([yes])
-else
-# FIXME - insert some real tests, host_os isn't really good enough
- case $host_os in
- darwin*)
- if test -n "$STRIP" ; then
- striplib="$STRIP -x"
- old_striplib="$STRIP -S"
- AC_MSG_RESULT([yes])
- else
- AC_MSG_RESULT([no])
-fi
- ;;
- *)
- AC_MSG_RESULT([no])
- ;;
- esac
-fi
-])# AC_LIBTOOL_SYS_LIB_STRIP
-
-
-# AC_LIBTOOL_SYS_DYNAMIC_LINKER
-# -----------------------------
-# PORTME Fill in your ld.so characteristics
-AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
-AC_MSG_CHECKING([dynamic linker characteristics])
-library_names_spec=
-libname_spec='lib$name'
-soname_spec=
-shrext_cmds=".so"
-postinstall_cmds=
-postuninstall_cmds=
-finish_cmds=
-finish_eval=
-shlibpath_var=
-shlibpath_overrides_runpath=unknown
-version_type=none
-dynamic_linker="$host_os ld.so"
-sys_lib_dlsearch_path_spec="/lib /usr/lib"
-m4_if($1,[],[
-if test "$GCC" = yes; then
- case $host_os in
- darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
- *) lt_awk_arg="/^libraries:/" ;;
- esac
- lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
- if echo "$lt_search_path_spec" | grep ';' >/dev/null ; then
- # if the path contains ";" then we assume it to be the separator
- # otherwise default to the standard path separator (i.e. ":") - it is
- # assumed that no part of a normal pathname contains ";" but that should
- # okay in the real world where ";" in dirpaths is itself problematic.
- lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e 's/;/ /g'`
- else
- lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
- fi
- # Ok, now we have the path, separated by spaces, we can step through it
- # and add multilib dir if necessary.
- lt_tmp_lt_search_path_spec=
- lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
- for lt_sys_path in $lt_search_path_spec; do
- if test -d "$lt_sys_path/$lt_multi_os_dir"; then
- lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
- else
- test -d "$lt_sys_path" && \
- lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
- fi
- done
- lt_search_path_spec=`echo $lt_tmp_lt_search_path_spec | awk '
-BEGIN {RS=" "; FS="/|\n";} {
- lt_foo="";
- lt_count=0;
- for (lt_i = NF; lt_i > 0; lt_i--) {
- if ($lt_i != "" && $lt_i != ".") {
- if ($lt_i == "..") {
- lt_count++;
- } else {
- if (lt_count == 0) {
- lt_foo="/" $lt_i lt_foo;
- } else {
- lt_count--;
- }
- }
- }
- }
- if (lt_foo != "") { lt_freq[[lt_foo]]++; }
- if (lt_freq[[lt_foo]] == 1) { print lt_foo; }
-}'`
- sys_lib_search_path_spec=`echo $lt_search_path_spec`
-else
- sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
-fi])
-need_lib_prefix=unknown
-hardcode_into_libs=no
-
-# when you set need_version to no, make sure it does not cause -set_version
-# flags to be left without arguments
-need_version=unknown
-
-case $host_os in
-aix3*)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
- shlibpath_var=LIBPATH
-
- # AIX 3 has no versioning support, so we append a major version to the name.
- soname_spec='${libname}${release}${shared_ext}$major'
- ;;
-
-aix4* | aix5*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- hardcode_into_libs=yes
- if test "$host_cpu" = ia64; then
- # AIX 5 supports IA64
- library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
- shlibpath_var=LD_LIBRARY_PATH
- else
- # With GCC up to 2.95.x, collect2 would create an import file
- # for dependence libraries. The import file would start with
- # the line `#! .'. This would cause the generated library to
- # depend on `.', always an invalid library. This was fixed in
- # development snapshots of GCC prior to 3.0.
- case $host_os in
- aix4 | aix4.[[01]] | aix4.[[01]].*)
- if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
- echo ' yes '
- echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
- :
- else
- can_build_shared=no
- fi
- ;;
- esac
- # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
- # soname into executable. Probably we can add versioning support to
- # collect2, so additional links can be useful in future.
- if test "$aix_use_runtimelinking" = yes; then
- # If using run time linking (on AIX 4.2 or later) use lib<name>.so
- # instead of lib<name>.a to let people know that these are not
- # typical AIX shared libraries.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- else
- # We preserve .a as extension for shared libraries through AIX4.2
- # and later when we are not doing run time linking.
- library_names_spec='${libname}${release}.a $libname.a'
- soname_spec='${libname}${release}${shared_ext}$major'
- fi
- shlibpath_var=LIBPATH
- fi
- ;;
-
-amigaos*)
- library_names_spec='$libname.ixlibrary $libname.a'
- # Create ${libname}_ixlibrary.a entries in /sys/libs.
- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
- ;;
-
-beos*)
- library_names_spec='${libname}${shared_ext}'
- dynamic_linker="$host_os ld.so"
- shlibpath_var=LIBRARY_PATH
- ;;
-
-bsdi[[45]]*)
- version_type=linux
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
- sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
- # the default ld.so.conf also contains /usr/contrib/lib and
- # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
- # libtool to hard-code these into programs
- ;;
-
-cygwin* | mingw* | pw32*)
- version_type=windows
- shrext_cmds=".dll"
- need_version=no
- need_lib_prefix=no
-
- case $GCC,$host_os in
- yes,cygwin* | yes,mingw* | yes,pw32*)
- library_names_spec='$libname.dll.a'
- # DLL is installed to $(libdir)/../bin by postinstall_cmds
- postinstall_cmds='base_file=`basename \${file}`~
- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
- dldir=$destdir/`dirname \$dlpath`~
- test -d \$dldir || mkdir -p \$dldir~
- $install_prog $dir/$dlname \$dldir/$dlname~
- chmod a+x \$dldir/$dlname'
- postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
- dlpath=$dir/\$dldll~
- $rm \$dlpath'
- shlibpath_overrides_runpath=yes
-
- case $host_os in
- cygwin*)
- # Cygwin DLLs use 'cyg' prefix rather than 'lib'
- soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
- sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
- ;;
- mingw*)
- # MinGW DLLs use traditional 'lib' prefix
- soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
- if echo "$sys_lib_search_path_spec" | [grep ';[c-zC-Z]:/' >/dev/null]; then
- # It is most probably a Windows format PATH printed by
- # mingw gcc, but we are running on Cygwin. Gcc prints its search
- # path with ; separators, and with drive letters. We can handle the
- # drive letters (cygwin fileutils understands them), so leave them,
- # especially as we might pass files found there to a mingw objdump,
- # which wouldn't understand a cygwinified path. Ahh.
- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
- else
- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
- fi
- ;;
- pw32*)
- # pw32 DLLs use 'pw' prefix rather than 'lib'
- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
- ;;
- esac
- ;;
-
- *)
- library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
- ;;
- esac
- dynamic_linker='Win32 ld.exe'
- # FIXME: first we should search . and the directory the executable is in
- shlibpath_var=PATH
- ;;
-
-darwin* | rhapsody*)
- dynamic_linker="$host_os dyld"
- version_type=darwin
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
- soname_spec='${libname}${release}${major}$shared_ext'
- shlibpath_overrides_runpath=yes
- shlibpath_var=DYLD_LIBRARY_PATH
- shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
- m4_if([$1], [],[
- sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"])
- sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
- ;;
-
-dgux*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- ;;
-
-freebsd1*)
- dynamic_linker=no
- ;;
-
-freebsd* | dragonfly*)
- # DragonFly does not have aout. When/if they implement a new
- # versioning mechanism, adjust this.
- if test -x /usr/bin/objformat; then
- objformat=`/usr/bin/objformat`
- else
- case $host_os in
- freebsd[[123]]*) objformat=aout ;;
- *) objformat=elf ;;
- esac
- fi
- version_type=freebsd-$objformat
- case $version_type in
- freebsd-elf*)
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
- need_version=no
- need_lib_prefix=no
- ;;
- freebsd-*)
- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
- need_version=yes
- ;;
- esac
- shlibpath_var=LD_LIBRARY_PATH
- case $host_os in
- freebsd2*)
- shlibpath_overrides_runpath=yes
- ;;
- freebsd3.[[01]]* | freebsdelf3.[[01]]*)
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- ;;
- freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \
- freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1)
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- ;;
- *) # from 4.6 on, and DragonFly
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- ;;
- esac
- ;;
-
-gnu*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- hardcode_into_libs=yes
- ;;
-
-hpux9* | hpux10* | hpux11*)
- # Give a soname corresponding to the major version so that dld.sl refuses to
- # link against other versions.
- version_type=sunos
- need_lib_prefix=no
- need_version=no
- case $host_cpu in
- ia64*)
- shrext_cmds='.so'
- hardcode_into_libs=yes
- dynamic_linker="$host_os dld.so"
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- if test "X$HPUX_IA64_MODE" = X32; then
- sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
- else
- sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
- fi
- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
- ;;
- hppa*64*)
- shrext_cmds='.sl'
- hardcode_into_libs=yes
- dynamic_linker="$host_os dld.sl"
- shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
- ;;
- *)
- shrext_cmds='.sl'
- dynamic_linker="$host_os dld.sl"
- shlibpath_var=SHLIB_PATH
- shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- ;;
- esac
- # HP-UX runs *really* slowly unless shared libraries are mode 555.
- postinstall_cmds='chmod 555 $lib'
- ;;
-
-interix[[3-9]]*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- ;;
-
-irix5* | irix6* | nonstopux*)
- case $host_os in
- nonstopux*) version_type=nonstopux ;;
- *)
- if test "$lt_cv_prog_gnu_ld" = yes; then
- version_type=linux
- else
- version_type=irix
- fi ;;
- esac
- need_lib_prefix=no
- need_version=no
- soname_spec='${libname}${release}${shared_ext}$major'
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
- case $host_os in
- irix5* | nonstopux*)
- libsuff= shlibsuff=
- ;;
- *)
- case $LD in # libtool.m4 will add one of these switches to LD
- *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
- libsuff= shlibsuff= libmagic=32-bit;;
- *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
- libsuff=32 shlibsuff=N32 libmagic=N32;;
- *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
- libsuff=64 shlibsuff=64 libmagic=64-bit;;
- *) libsuff= shlibsuff= libmagic=never-match;;
- esac
- ;;
- esac
- shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
- shlibpath_overrides_runpath=no
- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
- hardcode_into_libs=yes
- ;;
-
-# No shared lib support for Linux oldld, aout, or coff.
-linux*oldld* | linux*aout* | linux*coff*)
- dynamic_linker=no
- ;;
-
-# This must be Linux ELF.
-linux* | k*bsd*-gnu)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- # This implies no fast_install, which is unacceptable.
- # Some rework will be needed to allow for fast_install
- # before this can be enabled.
- hardcode_into_libs=yes
-
- # Append ld.so.conf contents to the search path
- if test -f /etc/ld.so.conf; then
- lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
- sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
- fi
-
- # We used to test for /lib/ld.so.1 and disable shared libraries on
- # powerpc, because MkLinux only supported shared libraries with the
- # GNU dynamic linker. Since this was broken with cross compilers,
- # most powerpc-linux boxes support dynamic linking these days and
- # people can always --disable-shared, the test was removed, and we
- # assume the GNU/Linux dynamic linker is in use.
- dynamic_linker='GNU/Linux ld.so'
- ;;
-
-netbsd*)
- version_type=sunos
- need_lib_prefix=no
- need_version=no
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
- dynamic_linker='NetBSD (a.out) ld.so'
- else
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- dynamic_linker='NetBSD ld.elf_so'
- fi
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- ;;
-
-newsos6)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- ;;
-
-nto-qnx*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- ;;
-
-openbsd*)
- version_type=sunos
- sys_lib_dlsearch_path_spec="/usr/lib"
- need_lib_prefix=no
- # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
- case $host_os in
- openbsd3.3 | openbsd3.3.*) need_version=yes ;;
- *) need_version=no ;;
- esac
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- case $host_os in
- openbsd2.[[89]] | openbsd2.[[89]].*)
- shlibpath_overrides_runpath=no
- ;;
- *)
- shlibpath_overrides_runpath=yes
- ;;
- esac
- else
- shlibpath_overrides_runpath=yes
- fi
- ;;
-
-os2*)
- libname_spec='$name'
- shrext_cmds=".dll"
- need_lib_prefix=no
- library_names_spec='$libname${shared_ext} $libname.a'
- dynamic_linker='OS/2 ld.exe'
- shlibpath_var=LIBPATH
- ;;
-
-osf3* | osf4* | osf5*)
- version_type=osf
- need_lib_prefix=no
- need_version=no
- soname_spec='${libname}${release}${shared_ext}$major'
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- shlibpath_var=LD_LIBRARY_PATH
- sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
- sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
- ;;
-
-rdos*)
- dynamic_linker=no
- ;;
-
-solaris*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- # ldd complains unless libraries are executable
- postinstall_cmds='chmod +x $lib'
- ;;
-
-sunos4*)
- version_type=sunos
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
- finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- if test "$with_gnu_ld" = yes; then
- need_lib_prefix=no
- fi
- need_version=yes
- ;;
-
-sysv4 | sysv4.3*)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- case $host_vendor in
- sni)
- shlibpath_overrides_runpath=no
- need_lib_prefix=no
- export_dynamic_flag_spec='${wl}-Blargedynsym'
- runpath_var=LD_RUN_PATH
- ;;
- siemens)
- need_lib_prefix=no
- ;;
- motorola)
- need_lib_prefix=no
- need_version=no
- shlibpath_overrides_runpath=no
- sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
- ;;
- esac
- ;;
-
-sysv4*MP*)
- if test -d /usr/nec ;then
- version_type=linux
- library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
- soname_spec='$libname${shared_ext}.$major'
- shlibpath_var=LD_LIBRARY_PATH
- fi
- ;;
-
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
- version_type=freebsd-elf
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- hardcode_into_libs=yes
- if test "$with_gnu_ld" = yes; then
- sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
- shlibpath_overrides_runpath=no
- else
- sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
- shlibpath_overrides_runpath=yes
- case $host_os in
- sco3.2v5*)
- sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
- ;;
- esac
- fi
- sys_lib_dlsearch_path_spec='/usr/lib'
- ;;
-
-uts4*)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- ;;
-
-*)
- dynamic_linker=no
- ;;
-esac
-AC_MSG_RESULT([$dynamic_linker])
-test "$dynamic_linker" = no && can_build_shared=no
-
-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
- variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-fi
-])# AC_LIBTOOL_SYS_DYNAMIC_LINKER
-
-
-# _LT_AC_TAGCONFIG
-# ----------------
-AC_DEFUN([_LT_AC_TAGCONFIG],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
-AC_ARG_WITH([tags],
- [AC_HELP_STRING([--with-tags@<:@=TAGS@:>@],
- [include additional configurations @<:@automatic@:>@])],
- [tagnames="$withval"])
-
-if test -f "$ltmain" && test -n "$tagnames"; then
- if test ! -f "${ofile}"; then
- AC_MSG_WARN([output file `$ofile' does not exist])
- fi
-
- if test -z "$LTCC"; then
- eval "`$SHELL ${ofile} --config | grep '^LTCC='`"
- if test -z "$LTCC"; then
- AC_MSG_WARN([output file `$ofile' does not look like a libtool script])
- else
- AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile'])
- fi
- fi
- if test -z "$LTCFLAGS"; then
- eval "`$SHELL ${ofile} --config | grep '^LTCFLAGS='`"
- fi
-
- # Extract list of available tagged configurations in $ofile.
- # Note that this assumes the entire list is on one line.
- available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'`
-
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
- for tagname in $tagnames; do
- IFS="$lt_save_ifs"
- # Check whether tagname contains only valid characters
- case `$echo "X$tagname" | $Xsed -e 's:[[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]]::g'` in
- "") ;;
- *) AC_MSG_ERROR([invalid tag name: $tagname])
- ;;
- esac
-
- if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null
- then
- AC_MSG_ERROR([tag name \"$tagname\" already exists])
- fi
-
- # Update the list of available tags.
- if test -n "$tagname"; then
- echo appending configuration tag \"$tagname\" to $ofile
-
- case $tagname in
- CXX)
- if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
- ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
- (test "X$CXX" != "Xg++"))) ; then
- AC_LIBTOOL_LANG_CXX_CONFIG
- else
- tagname=""
- fi
- ;;
-
- F77)
- if test -n "$F77" && test "X$F77" != "Xno"; then
- AC_LIBTOOL_LANG_F77_CONFIG
- else
- tagname=""
- fi
- ;;
-
- GCJ)
- if test -n "$GCJ" && test "X$GCJ" != "Xno"; then
- AC_LIBTOOL_LANG_GCJ_CONFIG
- else
- tagname=""
- fi
- ;;
-
- RC)
- AC_LIBTOOL_LANG_RC_CONFIG
- ;;
-
- *)
- AC_MSG_ERROR([Unsupported tag name: $tagname])
- ;;
- esac
-
- # Append the new tag name to the list of available tags.
- if test -n "$tagname" ; then
- available_tags="$available_tags $tagname"
- fi
- fi
- done
- IFS="$lt_save_ifs"
-
- # Now substitute the updated list of available tags.
- if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then
- mv "${ofile}T" "$ofile"
- chmod +x "$ofile"
- else
- rm -f "${ofile}T"
- AC_MSG_ERROR([unable to update list of available tagged configurations.])
- fi
-fi
-])# _LT_AC_TAGCONFIG
-
-
-# AC_LIBTOOL_DLOPEN
-# -----------------
-# enable checks for dlopen support
-AC_DEFUN([AC_LIBTOOL_DLOPEN],
- [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])
-])# AC_LIBTOOL_DLOPEN
-
-
-# AC_LIBTOOL_WIN32_DLL
-# --------------------
-# declare package support for building win32 DLLs
-AC_DEFUN([AC_LIBTOOL_WIN32_DLL],
-[AC_BEFORE([$0], [AC_LIBTOOL_SETUP])
-])# AC_LIBTOOL_WIN32_DLL
-
-
-# AC_ENABLE_SHARED([DEFAULT])
-# ---------------------------
-# implement the --enable-shared flag
-# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
-AC_DEFUN([AC_ENABLE_SHARED],
-[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE([shared],
- [AC_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
- [build shared libraries @<:@default=]AC_ENABLE_SHARED_DEFAULT[@:>@])],
- [p=${PACKAGE-default}
- case $enableval in
- yes) enable_shared=yes ;;
- no) enable_shared=no ;;
- *)
- enable_shared=no
- # Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
- for pkg in $enableval; do
- IFS="$lt_save_ifs"
- if test "X$pkg" = "X$p"; then
- enable_shared=yes
- fi
- done
- IFS="$lt_save_ifs"
- ;;
- esac],
- [enable_shared=]AC_ENABLE_SHARED_DEFAULT)
-])# AC_ENABLE_SHARED
-
-
-# AC_DISABLE_SHARED
-# -----------------
-# set the default shared flag to --disable-shared
-AC_DEFUN([AC_DISABLE_SHARED],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_SHARED(no)
-])# AC_DISABLE_SHARED
-
-
-# AC_ENABLE_STATIC([DEFAULT])
-# ---------------------------
-# implement the --enable-static flag
-# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
-AC_DEFUN([AC_ENABLE_STATIC],
-[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE([static],
- [AC_HELP_STRING([--enable-static@<:@=PKGS@:>@],
- [build static libraries @<:@default=]AC_ENABLE_STATIC_DEFAULT[@:>@])],
- [p=${PACKAGE-default}
- case $enableval in
- yes) enable_static=yes ;;
- no) enable_static=no ;;
- *)
- enable_static=no
- # Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
- for pkg in $enableval; do
- IFS="$lt_save_ifs"
- if test "X$pkg" = "X$p"; then
- enable_static=yes
- fi
- done
- IFS="$lt_save_ifs"
- ;;
- esac],
- [enable_static=]AC_ENABLE_STATIC_DEFAULT)
-])# AC_ENABLE_STATIC
-
-
-# AC_DISABLE_STATIC
-# -----------------
-# set the default static flag to --disable-static
-AC_DEFUN([AC_DISABLE_STATIC],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_STATIC(no)
-])# AC_DISABLE_STATIC
-
-
-# AC_ENABLE_FAST_INSTALL([DEFAULT])
-# ---------------------------------
-# implement the --enable-fast-install flag
-# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
-AC_DEFUN([AC_ENABLE_FAST_INSTALL],
-[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE([fast-install],
- [AC_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
- [optimize for fast installation @<:@default=]AC_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
- [p=${PACKAGE-default}
- case $enableval in
- yes) enable_fast_install=yes ;;
- no) enable_fast_install=no ;;
- *)
- enable_fast_install=no
- # Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
- for pkg in $enableval; do
- IFS="$lt_save_ifs"
- if test "X$pkg" = "X$p"; then
- enable_fast_install=yes
- fi
- done
- IFS="$lt_save_ifs"
- ;;
- esac],
- [enable_fast_install=]AC_ENABLE_FAST_INSTALL_DEFAULT)
-])# AC_ENABLE_FAST_INSTALL
-
-
-# AC_DISABLE_FAST_INSTALL
-# -----------------------
-# set the default to --disable-fast-install
-AC_DEFUN([AC_DISABLE_FAST_INSTALL],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_FAST_INSTALL(no)
-])# AC_DISABLE_FAST_INSTALL
-
-
-# AC_LIBTOOL_PICMODE([MODE])
-# --------------------------
-# implement the --with-pic flag
-# MODE is either `yes' or `no'. If omitted, it defaults to `both'.
-AC_DEFUN([AC_LIBTOOL_PICMODE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-pic_mode=ifelse($#,1,$1,default)
-])# AC_LIBTOOL_PICMODE
-
-
-# AC_PROG_EGREP
-# -------------
-# This is predefined starting with Autoconf 2.54, so this conditional
-# definition can be removed once we require Autoconf 2.54 or later.
-m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP],
-[AC_CACHE_CHECK([for egrep], [ac_cv_prog_egrep],
- [if echo a | (grep -E '(a|b)') >/dev/null 2>&1
- then ac_cv_prog_egrep='grep -E'
- else ac_cv_prog_egrep='egrep'
- fi])
- EGREP=$ac_cv_prog_egrep
- AC_SUBST([EGREP])
-])])
-
-
-# AC_PATH_TOOL_PREFIX
-# -------------------
-# find a file program which can recognize shared library
-AC_DEFUN([AC_PATH_TOOL_PREFIX],
-[AC_REQUIRE([AC_PROG_EGREP])dnl
-AC_MSG_CHECKING([for $1])
-AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
-[case $MAGIC_CMD in
-[[\\/*] | ?:[\\/]*])
- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
- ;;
-*)
- lt_save_MAGIC_CMD="$MAGIC_CMD"
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-dnl $ac_dummy forces splitting on constant user-supplied paths.
-dnl POSIX.2 word splitting is done only on the output of word expansions,
-dnl not every word. This closes a longstanding sh security hole.
- ac_dummy="ifelse([$2], , $PATH, [$2])"
- for ac_dir in $ac_dummy; do
- IFS="$lt_save_ifs"
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$1; then
- lt_cv_path_MAGIC_CMD="$ac_dir/$1"
- if test -n "$file_magic_test_file"; then
- case $deplibs_check_method in
- "file_magic "*)
- file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
- MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
- if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
- $EGREP "$file_magic_regex" > /dev/null; then
- :
- else
- cat <<EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such. This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem. Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool at gnu.org
-
-EOF
- fi ;;
- esac
- fi
- break
- fi
- done
- IFS="$lt_save_ifs"
- MAGIC_CMD="$lt_save_MAGIC_CMD"
- ;;
-esac])
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
- AC_MSG_RESULT($MAGIC_CMD)
-else
- AC_MSG_RESULT(no)
-fi
-])# AC_PATH_TOOL_PREFIX
-
-
-# AC_PATH_MAGIC
-# -------------
-# find a file program which can recognize a shared library
-AC_DEFUN([AC_PATH_MAGIC],
-[AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
-if test -z "$lt_cv_path_MAGIC_CMD"; then
- if test -n "$ac_tool_prefix"; then
- AC_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
- else
- MAGIC_CMD=:
- fi
-fi
-])# AC_PATH_MAGIC
-
-
-# AC_PROG_LD
-# ----------
-# find the pathname to the GNU or non-GNU linker
-AC_DEFUN([AC_PROG_LD],
-[AC_ARG_WITH([gnu-ld],
- [AC_HELP_STRING([--with-gnu-ld],
- [assume the C compiler uses GNU ld @<:@default=no@:>@])],
- [test "$withval" = no || with_gnu_ld=yes],
- [with_gnu_ld=no])
-AC_REQUIRE([LT_AC_PROG_SED])dnl
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-ac_prog=ld
-if test "$GCC" = yes; then
- # Check if gcc -print-prog-name=ld gives a path.
- AC_MSG_CHECKING([for ld used by $CC])
- case $host in
- *-*-mingw*)
- # gcc leaves a trailing carriage return which upsets mingw
- ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
- *)
- ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
- esac
- case $ac_prog in
- # Accept absolute paths.
- [[\\/]]* | ?:[[\\/]]*)
- re_direlt='/[[^/]][[^/]]*/\.\./'
- # Canonicalize the pathname of ld
- ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
- while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
- ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
- done
- test -z "$LD" && LD="$ac_prog"
- ;;
- "")
- # If it fails, then pretend we aren't using GCC.
- ac_prog=ld
- ;;
- *)
- # If it is relative, then search for the first ld in PATH.
- with_gnu_ld=unknown
- ;;
- esac
-elif test "$with_gnu_ld" = yes; then
- AC_MSG_CHECKING([for GNU ld])
-else
- AC_MSG_CHECKING([for non-GNU ld])
-fi
-AC_CACHE_VAL(lt_cv_path_LD,
-[if test -z "$LD"; then
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
- for ac_dir in $PATH; do
- IFS="$lt_save_ifs"
- test -z "$ac_dir" && ac_dir=.
- if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
- lt_cv_path_LD="$ac_dir/$ac_prog"
- # Check to see if the program is GNU ld. I'd rather use --version,
- # but apparently some variants of GNU ld only accept -v.
- # Break only if it was the GNU/non-GNU ld that we prefer.
- case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
- *GNU* | *'with BFD'*)
- test "$with_gnu_ld" != no && break
- ;;
- *)
- test "$with_gnu_ld" != yes && break
- ;;
- esac
- fi
- done
- IFS="$lt_save_ifs"
-else
- lt_cv_path_LD="$LD" # Let the user override the test with a path.
-fi])
-LD="$lt_cv_path_LD"
-if test -n "$LD"; then
- AC_MSG_RESULT($LD)
-else
- AC_MSG_RESULT(no)
-fi
-test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-AC_PROG_LD_GNU
-])# AC_PROG_LD
-
-
-# AC_PROG_LD_GNU
-# --------------
-AC_DEFUN([AC_PROG_LD_GNU],
-[AC_REQUIRE([AC_PROG_EGREP])dnl
-AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
-[# I'd rather use --version here, but apparently some GNU lds only accept -v.
-case `$LD -v 2>&1 </dev/null` in
-*GNU* | *'with BFD'*)
- lt_cv_prog_gnu_ld=yes
- ;;
-*)
- lt_cv_prog_gnu_ld=no
- ;;
-esac])
-with_gnu_ld=$lt_cv_prog_gnu_ld
-])# AC_PROG_LD_GNU
-
-
-# AC_PROG_LD_RELOAD_FLAG
-# ----------------------
-# find reload flag for linker
-# -- PORTME Some linkers may need a different reload flag.
-AC_DEFUN([AC_PROG_LD_RELOAD_FLAG],
-[AC_CACHE_CHECK([for $LD option to reload object files],
- lt_cv_ld_reload_flag,
- [lt_cv_ld_reload_flag='-r'])
-reload_flag=$lt_cv_ld_reload_flag
-case $reload_flag in
-"" | " "*) ;;
-*) reload_flag=" $reload_flag" ;;
-esac
-reload_cmds='$LD$reload_flag -o $output$reload_objs'
-case $host_os in
- darwin*)
- if test "$GCC" = yes; then
- reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
- else
- reload_cmds='$LD$reload_flag -o $output$reload_objs'
- fi
- ;;
-esac
-])# AC_PROG_LD_RELOAD_FLAG
-
-
-# AC_DEPLIBS_CHECK_METHOD
-# -----------------------
-# how to check for library dependencies
-# -- PORTME fill in with the dynamic library characteristics
-AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
-[AC_CACHE_CHECK([how to recognize dependent libraries],
-lt_cv_deplibs_check_method,
-[lt_cv_file_magic_cmd='$MAGIC_CMD'
-lt_cv_file_magic_test_file=
-lt_cv_deplibs_check_method='unknown'
-# Need to set the preceding variable on all platforms that support
-# interlibrary dependencies.
-# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
-# 'pass_all' -- all dependencies passed with no checks.
-# 'test_compile' -- check by making test program.
-# 'file_magic [[regex]]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given extended regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
-
-case $host_os in
-aix4* | aix5*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-beos*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-bsdi[[45]]*)
- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
- lt_cv_file_magic_cmd='/usr/bin/file -L'
- lt_cv_file_magic_test_file=/shlib/libc.so
- ;;
-
-cygwin*)
- # func_win32_libid is a shell function defined in ltmain.sh
- lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
- lt_cv_file_magic_cmd='func_win32_libid'
- ;;
-
-mingw* | pw32*)
- # Base MSYS/MinGW do not provide the 'file' command needed by
- # func_win32_libid shell function, so use a weaker test based on 'objdump',
- # unless we find 'file', for example because we are cross-compiling.
- if ( file / ) >/dev/null 2>&1; then
- lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
- lt_cv_file_magic_cmd='func_win32_libid'
- else
- lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
- lt_cv_file_magic_cmd='$OBJDUMP -f'
- fi
- ;;
-
-darwin* | rhapsody*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-freebsd* | dragonfly*)
- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
- case $host_cpu in
- i*86 )
- # Not sure whether the presence of OpenBSD here was a mistake.
- # Let's accept both of them until this is cleared up.
- lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library'
- lt_cv_file_magic_cmd=/usr/bin/file
- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
- ;;
- esac
- else
- lt_cv_deplibs_check_method=pass_all
- fi
- ;;
-
-gnu*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-hpux10.20* | hpux11*)
- lt_cv_file_magic_cmd=/usr/bin/file
- case $host_cpu in
- ia64*)
- lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
- lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
- ;;
- hppa*64*)
- [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]']
- lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
- ;;
- *)
- lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library'
- lt_cv_file_magic_test_file=/usr/lib/libc.sl
- ;;
- esac
- ;;
-
-interix[[3-9]]*)
- # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$'
- ;;
-
-irix5* | irix6* | nonstopux*)
- case $LD in
- *-32|*"-32 ") libmagic=32-bit;;
- *-n32|*"-n32 ") libmagic=N32;;
- *-64|*"-64 ") libmagic=64-bit;;
- *) libmagic=never-match;;
- esac
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-# This must be Linux ELF.
-linux* | k*bsd*-gnu)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-netbsd*)
- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
- else
- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$'
- fi
- ;;
-
-newos6*)
- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
- lt_cv_file_magic_cmd=/usr/bin/file
- lt_cv_file_magic_test_file=/usr/lib/libnls.so
- ;;
-
-nto-qnx*)
- lt_cv_deplibs_check_method=unknown
- ;;
-
-openbsd*)
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$'
- else
- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
- fi
- ;;
-
-osf3* | osf4* | osf5*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-rdos*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-solaris*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-sysv4 | sysv4.3*)
- case $host_vendor in
- motorola)
- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
- ;;
- ncr)
- lt_cv_deplibs_check_method=pass_all
- ;;
- sequent)
- lt_cv_file_magic_cmd='/bin/file'
- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
- ;;
- sni)
- lt_cv_file_magic_cmd='/bin/file'
- lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
- lt_cv_file_magic_test_file=/lib/libc.so
- ;;
- siemens)
- lt_cv_deplibs_check_method=pass_all
- ;;
- pc)
- lt_cv_deplibs_check_method=pass_all
- ;;
- esac
- ;;
-
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-esac
-])
-file_magic_cmd=$lt_cv_file_magic_cmd
-deplibs_check_method=$lt_cv_deplibs_check_method
-test -z "$deplibs_check_method" && deplibs_check_method=unknown
-])# AC_DEPLIBS_CHECK_METHOD
-
-
-# AC_PROG_NM
-# ----------
-# find the pathname to a BSD-compatible name lister
-AC_DEFUN([AC_PROG_NM],
-[AC_CACHE_CHECK([for BSD-compatible nm], lt_cv_path_NM,
-[if test -n "$NM"; then
- # Let the user override the test.
- lt_cv_path_NM="$NM"
-else
- lt_nm_to_check="${ac_tool_prefix}nm"
- if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
- lt_nm_to_check="$lt_nm_to_check nm"
- fi
- for lt_tmp_nm in $lt_nm_to_check; do
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
- for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
- IFS="$lt_save_ifs"
- test -z "$ac_dir" && ac_dir=.
- tmp_nm="$ac_dir/$lt_tmp_nm"
- if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
- # Check to see if the nm accepts a BSD-compat flag.
- # Adding the `sed 1q' prevents false positives on HP-UX, which says:
- # nm: unknown option "B" ignored
- # Tru64's nm complains that /dev/null is an invalid object file
- case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
- */dev/null* | *'Invalid file or object type'*)
- lt_cv_path_NM="$tmp_nm -B"
- break
- ;;
- *)
- case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
- */dev/null*)
- lt_cv_path_NM="$tmp_nm -p"
- break
- ;;
- *)
- lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
- continue # so that we can try to find one that supports BSD flags
- ;;
- esac
- ;;
- esac
- fi
- done
- IFS="$lt_save_ifs"
- done
- test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
-fi])
-NM="$lt_cv_path_NM"
-])# AC_PROG_NM
-
-
-# AC_CHECK_LIBM
-# -------------
-# check for math library
-AC_DEFUN([AC_CHECK_LIBM],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-LIBM=
-case $host in
-*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*)
- # These system don't have libm, or don't need it
- ;;
-*-ncr-sysv4.3*)
- AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
- AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
- ;;
-*)
- AC_CHECK_LIB(m, cos, LIBM="-lm")
- ;;
-esac
-])# AC_CHECK_LIBM
-
-
-# AC_LIBLTDL_CONVENIENCE([DIRECTORY])
-# -----------------------------------
-# sets LIBLTDL to the link flags for the libltdl convenience library and
-# LTDLINCL to the include flags for the libltdl header and adds
-# --enable-ltdl-convenience to the configure arguments. Note that
-# AC_CONFIG_SUBDIRS is not called here. If DIRECTORY is not provided,
-# it is assumed to be `libltdl'. LIBLTDL will be prefixed with
-# '${top_builddir}/' and LTDLINCL will be prefixed with '${top_srcdir}/'
-# (note the single quotes!). If your package is not flat and you're not
-# using automake, define top_builddir and top_srcdir appropriately in
-# the Makefiles.
-AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
- case $enable_ltdl_convenience in
- no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
- "") enable_ltdl_convenience=yes
- ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
- esac
- LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
- LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
- # For backwards non-gettext consistent compatibility...
- INCLTDL="$LTDLINCL"
-])# AC_LIBLTDL_CONVENIENCE
-
-
-# AC_LIBLTDL_INSTALLABLE([DIRECTORY])
-# -----------------------------------
-# sets LIBLTDL to the link flags for the libltdl installable library and
-# LTDLINCL to the include flags for the libltdl header and adds
-# --enable-ltdl-install to the configure arguments. Note that
-# AC_CONFIG_SUBDIRS is not called here. If DIRECTORY is not provided,
-# and an installed libltdl is not found, it is assumed to be `libltdl'.
-# LIBLTDL will be prefixed with '${top_builddir}/'# and LTDLINCL with
-# '${top_srcdir}/' (note the single quotes!). If your package is not
-# flat and you're not using automake, define top_builddir and top_srcdir
-# appropriately in the Makefiles.
-# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
-AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
- AC_CHECK_LIB(ltdl, lt_dlinit,
- [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
- [if test x"$enable_ltdl_install" = xno; then
- AC_MSG_WARN([libltdl not installed, but installation disabled])
- else
- enable_ltdl_install=yes
- fi
- ])
- if test x"$enable_ltdl_install" = x"yes"; then
- ac_configure_args="$ac_configure_args --enable-ltdl-install"
- LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
- LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
- else
- ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
- LIBLTDL="-lltdl"
- LTDLINCL=
- fi
- # For backwards non-gettext consistent compatibility...
- INCLTDL="$LTDLINCL"
-])# AC_LIBLTDL_INSTALLABLE
-
-
-# AC_LIBTOOL_CXX
-# --------------
-# enable support for C++ libraries
-AC_DEFUN([AC_LIBTOOL_CXX],
-[AC_REQUIRE([_LT_AC_LANG_CXX])
-])# AC_LIBTOOL_CXX
-
-
-# _LT_AC_LANG_CXX
-# ---------------
-AC_DEFUN([_LT_AC_LANG_CXX],
-[AC_REQUIRE([AC_PROG_CXX])
-AC_REQUIRE([_LT_AC_PROG_CXXCPP])
-_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}CXX])
-])# _LT_AC_LANG_CXX
-
-# _LT_AC_PROG_CXXCPP
-# ------------------
-AC_DEFUN([_LT_AC_PROG_CXXCPP],
-[
-AC_REQUIRE([AC_PROG_CXX])
-if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
- ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
- (test "X$CXX" != "Xg++"))) ; then
- AC_PROG_CXXCPP
-fi
-])# _LT_AC_PROG_CXXCPP
-
-# AC_LIBTOOL_F77
-# --------------
-# enable support for Fortran 77 libraries
-AC_DEFUN([AC_LIBTOOL_F77],
-[AC_REQUIRE([_LT_AC_LANG_F77])
-])# AC_LIBTOOL_F77
-
-
-# _LT_AC_LANG_F77
-# ---------------
-AC_DEFUN([_LT_AC_LANG_F77],
-[AC_REQUIRE([AC_PROG_F77])
-_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}F77])
-])# _LT_AC_LANG_F77
-
-
-# AC_LIBTOOL_GCJ
-# --------------
-# enable support for GCJ libraries
-AC_DEFUN([AC_LIBTOOL_GCJ],
-[AC_REQUIRE([_LT_AC_LANG_GCJ])
-])# AC_LIBTOOL_GCJ
-
-
-# _LT_AC_LANG_GCJ
-# ---------------
-AC_DEFUN([_LT_AC_LANG_GCJ],
-[AC_PROVIDE_IFELSE([AC_PROG_GCJ],[],
- [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[],
- [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[],
- [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])],
- [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])],
- [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])])
-_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}GCJ])
-])# _LT_AC_LANG_GCJ
-
-
-# AC_LIBTOOL_RC
-# -------------
-# enable support for Windows resource files
-AC_DEFUN([AC_LIBTOOL_RC],
-[AC_REQUIRE([LT_AC_PROG_RC])
-_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}RC])
-])# AC_LIBTOOL_RC
-
-
-# AC_LIBTOOL_LANG_C_CONFIG
-# ------------------------
-# Ensure that the configuration vars for the C compiler are
-# suitably defined. Those variables are subsequently used by
-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG], [_LT_AC_LANG_C_CONFIG])
-AC_DEFUN([_LT_AC_LANG_C_CONFIG],
-[lt_save_CC="$CC"
-AC_LANG_PUSH(C)
-
-# Source file extension for C test sources.
-ac_ext=c
-
-# Object file extension for compiled C test sources.
-objext=o
-_LT_AC_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="int some_variable = 0;"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='int main(){return(0);}'
-
-_LT_AC_SYS_COMPILER
-
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
-
-AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
-AC_LIBTOOL_PROG_COMPILER_PIC($1)
-AC_LIBTOOL_PROG_CC_C_O($1)
-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
-AC_LIBTOOL_PROG_LD_SHLIBS($1)
-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
-AC_LIBTOOL_SYS_LIB_STRIP
-AC_LIBTOOL_DLOPEN_SELF
-
-# Report which library types will actually be built
-AC_MSG_CHECKING([if libtool supports shared libraries])
-AC_MSG_RESULT([$can_build_shared])
-
-AC_MSG_CHECKING([whether to build shared libraries])
-test "$can_build_shared" = "no" && enable_shared=no
-
-# On AIX, shared libraries and static libraries use the same namespace, and
-# are all built from PIC.
-case $host_os in
-aix3*)
- test "$enable_shared" = yes && enable_static=no
- if test -n "$RANLIB"; then
- archive_cmds="$archive_cmds~\$RANLIB \$lib"
- postinstall_cmds='$RANLIB $lib'
- fi
- ;;
-
-aix4* | aix5*)
- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
- test "$enable_shared" = yes && enable_static=no
- fi
- ;;
-esac
-AC_MSG_RESULT([$enable_shared])
-
-AC_MSG_CHECKING([whether to build static libraries])
-# Make sure either enable_shared or enable_static is yes.
-test "$enable_shared" = yes || enable_static=yes
-AC_MSG_RESULT([$enable_static])
-
-AC_LIBTOOL_CONFIG($1)
-
-AC_LANG_POP
-CC="$lt_save_CC"
-])# AC_LIBTOOL_LANG_C_CONFIG
-
-
-# AC_LIBTOOL_LANG_CXX_CONFIG
-# --------------------------
-# Ensure that the configuration vars for the C compiler are
-# suitably defined. Those variables are subsequently used by
-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [_LT_AC_LANG_CXX_CONFIG(CXX)])
-AC_DEFUN([_LT_AC_LANG_CXX_CONFIG],
-[AC_LANG_PUSH(C++)
-AC_REQUIRE([AC_PROG_CXX])
-AC_REQUIRE([_LT_AC_PROG_CXXCPP])
-
-_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-_LT_AC_TAGVAR(allow_undefined_flag, $1)=
-_LT_AC_TAGVAR(always_export_symbols, $1)=no
-_LT_AC_TAGVAR(archive_expsym_cmds, $1)=
-_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
-_LT_AC_TAGVAR(hardcode_direct, $1)=no
-_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
-_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
-_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-_LT_AC_TAGVAR(hardcode_minus_L, $1)=no
-_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-_LT_AC_TAGVAR(hardcode_automatic, $1)=no
-_LT_AC_TAGVAR(module_cmds, $1)=
-_LT_AC_TAGVAR(module_expsym_cmds, $1)=
-_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
-_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-_LT_AC_TAGVAR(no_undefined_flag, $1)=
-_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
-
-# Dependencies to place before and after the object being linked:
-_LT_AC_TAGVAR(predep_objects, $1)=
-_LT_AC_TAGVAR(postdep_objects, $1)=
-_LT_AC_TAGVAR(predeps, $1)=
-_LT_AC_TAGVAR(postdeps, $1)=
-_LT_AC_TAGVAR(compiler_lib_search_path, $1)=
-
-# Source file extension for C++ test sources.
-ac_ext=cpp
-
-# Object file extension for compiled C++ test sources.
-objext=o
-_LT_AC_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="int some_variable = 0;"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }'
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_AC_SYS_COMPILER
-
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
-
-# Allow CC to be a program name with arguments.
-lt_save_CC=$CC
-lt_save_LD=$LD
-lt_save_GCC=$GCC
-GCC=$GXX
-lt_save_with_gnu_ld=$with_gnu_ld
-lt_save_path_LD=$lt_cv_path_LD
-if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
- lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
-else
- $as_unset lt_cv_prog_gnu_ld
-fi
-if test -n "${lt_cv_path_LDCXX+set}"; then
- lt_cv_path_LD=$lt_cv_path_LDCXX
-else
- $as_unset lt_cv_path_LD
-fi
-test -z "${LDCXX+set}" || LD=$LDCXX
-CC=${CXX-"c++"}
-compiler=$CC
-_LT_AC_TAGVAR(compiler, $1)=$CC
-_LT_CC_BASENAME([$compiler])
-
-# We don't want -fno-exception wen compiling C++ code, so set the
-# no_builtin_flag separately
-if test "$GXX" = yes; then
- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
-else
- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
-fi
-
-if test "$GXX" = yes; then
- # Set up default GNU C++ configuration
-
- AC_PROG_LD
-
- # Check if GNU C++ uses GNU ld as the underlying linker, since the
- # archiving commands below assume that GNU ld is being used.
- if test "$with_gnu_ld" = yes; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-
- # If archive_cmds runs LD, not CC, wlarc should be empty
- # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
- # investigate it a little bit more. (MM)
- wlarc='${wl}'
-
- # ancient GNU ld didn't support --whole-archive et. al.
- if eval "`$CC -print-prog-name=ld` --help 2>&1" | \
- grep 'no-whole-archive' > /dev/null; then
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
- else
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
- fi
- else
- with_gnu_ld=no
- wlarc=
-
- # A generic and very simple default shared library creation
- # command for GNU C++ for the case where it uses the native
- # linker, instead of GNU ld. If possible, this setting should
- # overridden to take advantage of the native linker features on
- # the platform it is being used on.
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
- fi
-
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
-
-else
- GXX=no
- with_gnu_ld=no
- wlarc=
-fi
-
-# PORTME: fill in a description of your system's C++ link characteristics
-AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
-_LT_AC_TAGVAR(ld_shlibs, $1)=yes
-case $host_os in
- aix3*)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- aix4* | aix5*)
- if test "$host_cpu" = ia64; then
- # On IA64, the linker does run time linking by default, so we don't
- # have to do anything special.
- aix_use_runtimelinking=no
- exp_sym_flag='-Bexport'
- no_entry_flag=""
- else
- aix_use_runtimelinking=no
-
- # Test if we are trying to use run time linking or normal
- # AIX style linking. If -brtl is somewhere in LDFLAGS, we
- # need to do runtime linking.
- case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)
- for ld_flag in $LDFLAGS; do
- case $ld_flag in
- *-brtl*)
- aix_use_runtimelinking=yes
- break
- ;;
- esac
- done
- ;;
- esac
-
- exp_sym_flag='-bexport'
- no_entry_flag='-bnoentry'
- fi
-
- # When large executables or shared objects are built, AIX ld can
- # have problems creating the table of contents. If linking a library
- # or program results in "error TOC overflow" add -mminimal-toc to
- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-
- _LT_AC_TAGVAR(archive_cmds, $1)=''
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-
- if test "$GXX" = yes; then
- case $host_os in aix4.[[012]]|aix4.[[012]].*)
- # We only want to do this on AIX 4.2 and lower, the check
- # below for broken collect2 doesn't work under 4.3+
- collect2name=`${CC} -print-prog-name=collect2`
- if test -f "$collect2name" && \
- strings "$collect2name" | grep resolve_lib_name >/dev/null
- then
- # We have reworked collect2
- :
- else
- # We have old collect2
- _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
- # It fails to find uninstalled libraries when the uninstalled
- # path is not listed in the libpath. Setting hardcode_minus_L
- # to unsupported forces relinking
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
- fi
- ;;
- esac
- shared_flag='-shared'
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag="$shared_flag "'${wl}-G'
- fi
- else
- # not using gcc
- if test "$host_cpu" = ia64; then
- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
- # chokes on -Wl,-G. The following line is correct:
- shared_flag='-G'
- else
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag='${wl}-G'
- else
- shared_flag='${wl}-bM:SRE'
- fi
- fi
- fi
-
- # It seems that -bexpall does not export symbols beginning with
- # underscore (_), so it is better to generate a list of symbols to export.
- _LT_AC_TAGVAR(always_export_symbols, $1)=yes
- if test "$aix_use_runtimelinking" = yes; then
- # Warning - without using the other runtime loading flags (-brtl),
- # -berok will link without error, but may produce a broken library.
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
- # Determine the default libpath from the value encoded in an empty executable.
- _LT_AC_SYS_LIBPATH_AIX
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
- else
- if test "$host_cpu" = ia64; then
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
- _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
- else
- # Determine the default libpath from the value encoded in an empty executable.
- _LT_AC_SYS_LIBPATH_AIX
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
- # Warning - without using the other run time loading flags,
- # -berok will link without error, but may produce a broken library.
- _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
- # Exported symbols can be pulled into shared objects from archives
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
- # This is similar to how AIX traditionally builds its shared libraries.
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
- fi
- fi
- ;;
-
- beos*)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
- # Joseph Beckenbach <jrb3 at best.com> says some releases of gcc
- # support --undefined. This deserves some investigation. FIXME
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- else
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
-
- chorus*)
- case $cc_basename in
- *)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- esac
- ;;
-
- cygwin* | mingw* | pw32*)
- # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
- # as there is no search path for DLLs.
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
- _LT_AC_TAGVAR(always_export_symbols, $1)=no
- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-
- if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- # If the export-symbols file already is a .def file (1st line
- # is EXPORTS), use it as is; otherwise, prepend...
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
- cp $export_symbols $output_objdir/$soname.def;
- else
- echo EXPORTS > $output_objdir/$soname.def;
- cat $export_symbols >> $output_objdir/$soname.def;
- fi~
- $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- else
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
- darwin* | rhapsody*)
- case $host_os in
- rhapsody* | darwin1.[[012]])
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress'
- ;;
- *) # Darwin 1.3 on
- if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
- else
- case ${MACOSX_DEPLOYMENT_TARGET} in
- 10.[[012]])
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
- ;;
- 10.*)
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup'
- ;;
- esac
- fi
- ;;
- esac
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
- _LT_AC_TAGVAR(hardcode_direct, $1)=no
- _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=''
- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-
- if test "$GXX" = yes ; then
- lt_int_apple_cc_single_mod=no
- output_verbose_link_cmd='echo'
- if $CC -dumpspecs 2>&1 | $EGREP 'single_module' >/dev/null ; then
- lt_int_apple_cc_single_mod=yes
- fi
- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
- else
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
- fi
- _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- else
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- fi
- _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- else
- case $cc_basename in
- xlc*)
- output_verbose_link_cmd='echo'
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
- _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- ;;
- *)
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- esac
- fi
- ;;
-
- dgux*)
- case $cc_basename in
- ec++*)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- ghcx*)
- # Green Hills C++ Compiler
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- *)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- esac
- ;;
- freebsd[[12]]*)
- # C++ shared libraries reported to be fairly broken before switch to ELF
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- freebsd-elf*)
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
- ;;
- freebsd* | dragonfly*)
- # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
- # conventions
- _LT_AC_TAGVAR(ld_shlibs, $1)=yes
- ;;
- gnu*)
- ;;
- hpux9*)
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
- # but as the default
- # location of the library.
-
- case $cc_basename in
- CC*)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- aCC*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- #
- # There doesn't appear to be a way to prevent this compiler from
- # explicitly linking system object files so we need to strip them
- # from the output so that they don't get included in the library
- # dependencies.
- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[[-]]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
- ;;
- *)
- if test "$GXX" = yes; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
- else
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
- esac
- ;;
- hpux10*|hpux11*)
- if test $with_gnu_ld = no; then
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
- case $host_cpu in
- hppa*64*|ia64*) ;;
- *)
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
- ;;
- esac
- fi
- case $host_cpu in
- hppa*64*|ia64*)
- _LT_AC_TAGVAR(hardcode_direct, $1)=no
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
- *)
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
- # but as the default
- # location of the library.
- ;;
- esac
-
- case $cc_basename in
- CC*)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- aCC*)
- case $host_cpu in
- hppa*64*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- ;;
- ia64*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- ;;
- *)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- ;;
- esac
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- #
- # There doesn't appear to be a way to prevent this compiler from
- # explicitly linking system object files so we need to strip them
- # from the output so that they don't get included in the library
- # dependencies.
- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
- ;;
- *)
- if test "$GXX" = yes; then
- if test $with_gnu_ld = no; then
- case $host_cpu in
- hppa*64*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- ;;
- ia64*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- ;;
- *)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- ;;
- esac
- fi
- else
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
- esac
- ;;
- interix[[3-9]]*)
- _LT_AC_TAGVAR(hardcode_direct, $1)=no
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
- # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
- # Instead, shared libraries are loaded at an image base (0x10000000 by
- # default) and relocated if they conflict, which is a slow very memory
- # consuming and fragmenting process. To avoid this, we pick a random,
- # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
- # time. Moving up from 0x10000000 also allows more sbrk(2) space.
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- ;;
- irix5* | irix6*)
- case $cc_basename in
- CC*)
- # SGI C++
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-
- # Archives containing C++ object files must be created using
- # "CC -ar", where "CC" is the IRIX C++ compiler. This is
- # necessary to make sure instantiated templates are included
- # in the archive.
- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
- ;;
- *)
- if test "$GXX" = yes; then
- if test "$with_gnu_ld" = no; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- else
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib'
- fi
- fi
- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
- ;;
- esac
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
- ;;
- linux* | k*bsd*-gnu)
- case $cc_basename in
- KCC*)
- # Kuck and Associates, Inc. (KAI) C++ Compiler
-
- # KCC will only create a shared library if the output file
- # ends with ".so" (or ".sl" for HP-UX), so rename the library
- # to its proper name (with version) after linking.
- _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- #
- # There doesn't appear to be a way to prevent this compiler from
- # explicitly linking system object files so we need to strip them
- # from the output so that they don't get included in the library
- # dependencies.
- output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath,$libdir'
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-
- # Archives containing C++ object files must be created using
- # "CC -Bstatic", where "CC" is the KAI C++ compiler.
- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
- ;;
- icpc*)
- # Intel C++
- with_gnu_ld=yes
- # version 8.0 and above of icpc choke on multiply defined symbols
- # if we add $predep_objects and $postdep_objects, however 7.1 and
- # earlier do not add the objects themselves.
- case `$CC -V 2>&1` in
- *"Version 7."*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- ;;
- *) # Version 8.0 or newer
- tmp_idyn=
- case $host_cpu in
- ia64*) tmp_idyn=' -i_dynamic';;
- esac
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- ;;
- esac
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
- ;;
- pgCC*)
- # Portland Group C++ compiler
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
-
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
- ;;
- cxx*)
- # Compaq C++
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
-
- runpath_var=LD_RUN_PATH
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- #
- # There doesn't appear to be a way to prevent this compiler from
- # explicitly linking system object files so we need to strip them
- # from the output so that they don't get included in the library
- # dependencies.
- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
- ;;
- *)
- case `$CC -V 2>&1 | sed 5q` in
- *Sun\ C*)
- # Sun C++ 5.9
- _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs'
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-
- # Not sure whether something based on
- # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
- # would be better.
- output_verbose_link_cmd='echo'
-
- # Archives containing C++ object files must be created using
- # "CC -xar", where "CC" is the Sun C++ compiler. This is
- # necessary to make sure instantiated templates are included
- # in the archive.
- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
- ;;
- esac
- ;;
- esac
- ;;
- lynxos*)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- m88k*)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- mvs*)
- case $cc_basename in
- cxx*)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- *)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- esac
- ;;
- netbsd*)
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
- wlarc=
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- fi
- # Workaround some broken pre-1.5 toolchains
- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
- ;;
- openbsd2*)
- # C++ shared libraries are fairly broken
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- openbsd*)
- if test -f /usr/libexec/ld.so; then
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
- fi
- output_verbose_link_cmd='echo'
- else
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
- osf3*)
- case $cc_basename in
- KCC*)
- # Kuck and Associates, Inc. (KAI) C++ Compiler
-
- # KCC will only create a shared library if the output file
- # ends with ".so" (or ".sl" for HP-UX), so rename the library
- # to its proper name (with version) after linking.
- _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
- # Archives containing C++ object files must be created using
- # "CC -Bstatic", where "CC" is the KAI C++ compiler.
- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
-
- ;;
- RCC*)
- # Rational C++ 2.4.1
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- cxx*)
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- #
- # There doesn't appear to be a way to prevent this compiler from
- # explicitly linking system object files so we need to strip them
- # from the output so that they don't get included in the library
- # dependencies.
- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
- ;;
- *)
- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
-
- else
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
- esac
- ;;
- osf4* | osf5*)
- case $cc_basename in
- KCC*)
- # Kuck and Associates, Inc. (KAI) C++ Compiler
-
- # KCC will only create a shared library if the output file
- # ends with ".so" (or ".sl" for HP-UX), so rename the library
- # to its proper name (with version) after linking.
- _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
- # Archives containing C++ object files must be created using
- # the KAI C++ compiler.
- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs'
- ;;
- RCC*)
- # Rational C++ 2.4.1
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- cxx*)
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
- echo "-hidden">> $lib.exp~
- $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~
- $rm $lib.exp'
-
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- #
- # There doesn't appear to be a way to prevent this compiler from
- # explicitly linking system object files so we need to strip them
- # from the output so that they don't get included in the library
- # dependencies.
- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
- ;;
- *)
- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
-
- else
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
- esac
- ;;
- psos*)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- sunos4*)
- case $cc_basename in
- CC*)
- # Sun C++ 4.x
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- lcc*)
- # Lucid
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- *)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- esac
- ;;
- solaris*)
- case $cc_basename in
- CC*)
- # Sun C++ 4.2, 5.x and Centerline C++
- _LT_AC_TAGVAR(archive_cmds_need_lc,$1)=yes
- _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs'
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
- $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- case $host_os in
- solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
- *)
- # The compiler driver will combine and reorder linker options,
- # but understands `-z linker_flag'.
- # Supported since Solaris 2.6 (maybe 2.5.1?)
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
- ;;
- esac
- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-
- output_verbose_link_cmd='echo'
-
- # Archives containing C++ object files must be created using
- # "CC -xar", where "CC" is the Sun C++ compiler. This is
- # necessary to make sure instantiated templates are included
- # in the archive.
- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
- ;;
- gcx*)
- # Green Hills C++ Compiler
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-
- # The C++ compiler must be used to create the archive.
- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
- ;;
- *)
- # GNU C++ compiler with Solaris linker
- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
- _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
- if $CC --version | grep -v '^2\.7' > /dev/null; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
- $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
- else
- # g++ 2.7 appears to require `-G' NOT `-shared' on this
- # platform.
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
- $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
- fi
-
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
- case $host_os in
- solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
- *)
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
- ;;
- esac
- fi
- ;;
- esac
- ;;
- sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
- _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- runpath_var='LD_RUN_PATH'
-
- case $cc_basename in
- CC*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- *)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- esac
- ;;
- sysv5* | sco3.2v5* | sco5v6*)
- # Note: We can NOT use -z defs as we might desire, because we do not
- # link with -lc, and that would cause any symbols used from libc to
- # always be unresolved, which means just about no library would
- # ever link correctly. If we're not using GNU ld we use -z text
- # though, which does catch some bad symbols but isn't as heavy-handed
- # as -z defs.
- # For security reasons, it is highly recommended that you always
- # use absolute paths for naming shared libraries, and exclude the
- # DT_RUNPATH tag from executables and libraries. But doing so
- # requires that you compile everything twice, which is a pain.
- # So that behaviour is only enabled if SCOABSPATH is set to a
- # non-empty value in the environment. Most likely only useful for
- # creating official distributions of packages.
- # This is a hack until libtool officially supports absolute path
- # names for shared libraries.
- _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
- runpath_var='LD_RUN_PATH'
-
- case $cc_basename in
- CC*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- *)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- esac
- ;;
- tandem*)
- case $cc_basename in
- NCC*)
- # NonStop-UX NCC 3.20
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- *)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- esac
- ;;
- vxworks*)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- *)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
-esac
-AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
-test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
-
-_LT_AC_TAGVAR(GCC, $1)="$GXX"
-_LT_AC_TAGVAR(LD, $1)="$LD"
-
-AC_LIBTOOL_POSTDEP_PREDEP($1)
-AC_LIBTOOL_PROG_COMPILER_PIC($1)
-AC_LIBTOOL_PROG_CC_C_O($1)
-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
-AC_LIBTOOL_PROG_LD_SHLIBS($1)
-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
-
-AC_LIBTOOL_CONFIG($1)
-
-AC_LANG_POP
-CC=$lt_save_CC
-LDCXX=$LD
-LD=$lt_save_LD
-GCC=$lt_save_GCC
-with_gnu_ldcxx=$with_gnu_ld
-with_gnu_ld=$lt_save_with_gnu_ld
-lt_cv_path_LDCXX=$lt_cv_path_LD
-lt_cv_path_LD=$lt_save_path_LD
-lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
-lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
-])# AC_LIBTOOL_LANG_CXX_CONFIG
-
-# AC_LIBTOOL_POSTDEP_PREDEP([TAGNAME])
-# ------------------------------------
-# Figure out "hidden" library dependencies from verbose
-# compiler output when linking a shared library.
-# Parse the compiler output and extract the necessary
-# objects, libraries and library flags.
-AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP],[
-dnl we can't use the lt_simple_compile_test_code here,
-dnl because it contains code intended for an executable,
-dnl not a library. It's possible we should let each
-dnl tag define a new lt_????_link_test_code variable,
-dnl but it's only used here...
-ifelse([$1],[],[cat > conftest.$ac_ext <<EOF
-int a;
-void foo (void) { a = 0; }
-EOF
-],[$1],[CXX],[cat > conftest.$ac_ext <<EOF
-class Foo
-{
-public:
- Foo (void) { a = 0; }
-private:
- int a;
-};
-EOF
-],[$1],[F77],[cat > conftest.$ac_ext <<EOF
- subroutine foo
- implicit none
- integer*4 a
- a=0
- return
- end
-EOF
-],[$1],[GCJ],[cat > conftest.$ac_ext <<EOF
-public class foo {
- private int a;
- public void bar (void) {
- a = 0;
- }
-};
-EOF
-])
-dnl Parse the compiler output and extract the necessary
-dnl objects, libraries and library flags.
-if AC_TRY_EVAL(ac_compile); then
- # Parse the compiler output and extract the necessary
- # objects, libraries and library flags.
-
- # Sentinel used to keep track of whether or not we are before
- # the conftest object file.
- pre_test_object_deps_done=no
-
- # The `*' in the case matches for architectures that use `case' in
- # $output_verbose_cmd can trigger glob expansion during the loop
- # eval without this substitution.
- output_verbose_link_cmd=`$echo "X$output_verbose_link_cmd" | $Xsed -e "$no_glob_subst"`
-
- for p in `eval $output_verbose_link_cmd`; do
- case $p in
-
- -L* | -R* | -l*)
- # Some compilers place space between "-{L,R}" and the path.
- # Remove the space.
- if test $p = "-L" \
- || test $p = "-R"; then
- prev=$p
- continue
- else
- prev=
- fi
-
- if test "$pre_test_object_deps_done" = no; then
- case $p in
- -L* | -R*)
- # Internal compiler library paths should come after those
- # provided the user. The postdeps already come after the
- # user supplied libs so there is no need to process them.
- if test -z "$_LT_AC_TAGVAR(compiler_lib_search_path, $1)"; then
- _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
- else
- _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${_LT_AC_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
- fi
- ;;
- # The "-l" case would never come before the object being
- # linked, so don't bother handling this case.
- esac
- else
- if test -z "$_LT_AC_TAGVAR(postdeps, $1)"; then
- _LT_AC_TAGVAR(postdeps, $1)="${prev}${p}"
- else
- _LT_AC_TAGVAR(postdeps, $1)="${_LT_AC_TAGVAR(postdeps, $1)} ${prev}${p}"
- fi
- fi
- ;;
-
- *.$objext)
- # This assumes that the test object file only shows up
- # once in the compiler output.
- if test "$p" = "conftest.$objext"; then
- pre_test_object_deps_done=yes
- continue
- fi
-
- if test "$pre_test_object_deps_done" = no; then
- if test -z "$_LT_AC_TAGVAR(predep_objects, $1)"; then
- _LT_AC_TAGVAR(predep_objects, $1)="$p"
- else
- _LT_AC_TAGVAR(predep_objects, $1)="$_LT_AC_TAGVAR(predep_objects, $1) $p"
- fi
- else
- if test -z "$_LT_AC_TAGVAR(postdep_objects, $1)"; then
- _LT_AC_TAGVAR(postdep_objects, $1)="$p"
- else
- _LT_AC_TAGVAR(postdep_objects, $1)="$_LT_AC_TAGVAR(postdep_objects, $1) $p"
- fi
- fi
- ;;
-
- *) ;; # Ignore the rest.
-
- esac
- done
-
- # Clean up.
- rm -f a.out a.exe
-else
- echo "libtool.m4: error: problem compiling $1 test program"
-fi
-
-$rm -f confest.$objext
-
-# PORTME: override above test on systems where it is broken
-ifelse([$1],[CXX],
-[case $host_os in
-interix[[3-9]]*)
- # Interix 3.5 installs completely hosed .la files for C++, so rather than
- # hack all around it, let's just trust "g++" to DTRT.
- _LT_AC_TAGVAR(predep_objects,$1)=
- _LT_AC_TAGVAR(postdep_objects,$1)=
- _LT_AC_TAGVAR(postdeps,$1)=
- ;;
-
-linux*)
- case `$CC -V 2>&1 | sed 5q` in
- *Sun\ C*)
- # Sun C++ 5.9
- #
- # The more standards-conforming stlport4 library is
- # incompatible with the Cstd library. Avoid specifying
- # it if it's in CXXFLAGS. Ignore libCrun as
- # -library=stlport4 depends on it.
- case " $CXX $CXXFLAGS " in
- *" -library=stlport4 "*)
- solaris_use_stlport4=yes
- ;;
- esac
- if test "$solaris_use_stlport4" != yes; then
- _LT_AC_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
- fi
- ;;
- esac
- ;;
-
-solaris*)
- case $cc_basename in
- CC*)
- # The more standards-conforming stlport4 library is
- # incompatible with the Cstd library. Avoid specifying
- # it if it's in CXXFLAGS. Ignore libCrun as
- # -library=stlport4 depends on it.
- case " $CXX $CXXFLAGS " in
- *" -library=stlport4 "*)
- solaris_use_stlport4=yes
- ;;
- esac
-
- # Adding this requires a known-good setup of shared libraries for
- # Sun compiler versions before 5.6, else PIC objects from an old
- # archive will be linked into the output, leading to subtle bugs.
- if test "$solaris_use_stlport4" != yes; then
- _LT_AC_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
- fi
- ;;
- esac
- ;;
-esac
-])
-
-case " $_LT_AC_TAGVAR(postdeps, $1) " in
-*" -lc "*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;;
-esac
-])# AC_LIBTOOL_POSTDEP_PREDEP
-
-# AC_LIBTOOL_LANG_F77_CONFIG
-# --------------------------
-# Ensure that the configuration vars for the C compiler are
-# suitably defined. Those variables are subsequently used by
-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG], [_LT_AC_LANG_F77_CONFIG(F77)])
-AC_DEFUN([_LT_AC_LANG_F77_CONFIG],
-[AC_REQUIRE([AC_PROG_F77])
-AC_LANG_PUSH(Fortran 77)
-
-_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-_LT_AC_TAGVAR(allow_undefined_flag, $1)=
-_LT_AC_TAGVAR(always_export_symbols, $1)=no
-_LT_AC_TAGVAR(archive_expsym_cmds, $1)=
-_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
-_LT_AC_TAGVAR(hardcode_direct, $1)=no
-_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
-_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
-_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-_LT_AC_TAGVAR(hardcode_minus_L, $1)=no
-_LT_AC_TAGVAR(hardcode_automatic, $1)=no
-_LT_AC_TAGVAR(module_cmds, $1)=
-_LT_AC_TAGVAR(module_expsym_cmds, $1)=
-_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
-_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-_LT_AC_TAGVAR(no_undefined_flag, $1)=
-_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
-
-# Source file extension for f77 test sources.
-ac_ext=f
-
-# Object file extension for compiled f77 test sources.
-objext=o
-_LT_AC_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="\
- subroutine t
- return
- end
-"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code="\
- program t
- end
-"
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_AC_SYS_COMPILER
-
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
-
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-CC=${F77-"f77"}
-compiler=$CC
-_LT_AC_TAGVAR(compiler, $1)=$CC
-_LT_CC_BASENAME([$compiler])
-
-AC_MSG_CHECKING([if libtool supports shared libraries])
-AC_MSG_RESULT([$can_build_shared])
-
-AC_MSG_CHECKING([whether to build shared libraries])
-test "$can_build_shared" = "no" && enable_shared=no
-
-# On AIX, shared libraries and static libraries use the same namespace, and
-# are all built from PIC.
-case $host_os in
-aix3*)
- test "$enable_shared" = yes && enable_static=no
- if test -n "$RANLIB"; then
- archive_cmds="$archive_cmds~\$RANLIB \$lib"
- postinstall_cmds='$RANLIB $lib'
- fi
- ;;
-aix4* | aix5*)
- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
- test "$enable_shared" = yes && enable_static=no
- fi
- ;;
-esac
-AC_MSG_RESULT([$enable_shared])
-
-AC_MSG_CHECKING([whether to build static libraries])
-# Make sure either enable_shared or enable_static is yes.
-test "$enable_shared" = yes || enable_static=yes
-AC_MSG_RESULT([$enable_static])
-
-_LT_AC_TAGVAR(GCC, $1)="$G77"
-_LT_AC_TAGVAR(LD, $1)="$LD"
-
-AC_LIBTOOL_PROG_COMPILER_PIC($1)
-AC_LIBTOOL_PROG_CC_C_O($1)
-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
-AC_LIBTOOL_PROG_LD_SHLIBS($1)
-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
-
-AC_LIBTOOL_CONFIG($1)
-
-AC_LANG_POP
-CC="$lt_save_CC"
-])# AC_LIBTOOL_LANG_F77_CONFIG
-
-
-# AC_LIBTOOL_LANG_GCJ_CONFIG
-# --------------------------
-# Ensure that the configuration vars for the C compiler are
-# suitably defined. Those variables are subsequently used by
-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG], [_LT_AC_LANG_GCJ_CONFIG(GCJ)])
-AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG],
-[AC_LANG_SAVE
-
-# Source file extension for Java test sources.
-ac_ext=java
-
-# Object file extension for compiled Java test sources.
-objext=o
-_LT_AC_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="class foo {}"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }'
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_AC_SYS_COMPILER
-
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
-
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-CC=${GCJ-"gcj"}
-compiler=$CC
-_LT_AC_TAGVAR(compiler, $1)=$CC
-_LT_CC_BASENAME([$compiler])
-
-# GCJ did not exist at the time GCC didn't implicitly link libc in.
-_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-
-_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-
-AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
-AC_LIBTOOL_PROG_COMPILER_PIC($1)
-AC_LIBTOOL_PROG_CC_C_O($1)
-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
-AC_LIBTOOL_PROG_LD_SHLIBS($1)
-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
-
-AC_LIBTOOL_CONFIG($1)
-
-AC_LANG_RESTORE
-CC="$lt_save_CC"
-])# AC_LIBTOOL_LANG_GCJ_CONFIG
-
-
-# AC_LIBTOOL_LANG_RC_CONFIG
-# -------------------------
-# Ensure that the configuration vars for the Windows resource compiler are
-# suitably defined. Those variables are subsequently used by
-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG], [_LT_AC_LANG_RC_CONFIG(RC)])
-AC_DEFUN([_LT_AC_LANG_RC_CONFIG],
-[AC_LANG_SAVE
-
-# Source file extension for RC test sources.
-ac_ext=rc
-
-# Object file extension for compiled RC test sources.
-objext=o
-_LT_AC_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
-
-# Code to be used in simple link tests
-lt_simple_link_test_code="$lt_simple_compile_test_code"
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_AC_SYS_COMPILER
-
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
-
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-CC=${RC-"windres"}
-compiler=$CC
-_LT_AC_TAGVAR(compiler, $1)=$CC
-_LT_CC_BASENAME([$compiler])
-_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
-
-AC_LIBTOOL_CONFIG($1)
-
-AC_LANG_RESTORE
-CC="$lt_save_CC"
-])# AC_LIBTOOL_LANG_RC_CONFIG
-
-
-# AC_LIBTOOL_CONFIG([TAGNAME])
-# ----------------------------
-# If TAGNAME is not passed, then create an initial libtool script
-# with a default configuration from the untagged config vars. Otherwise
-# add code to config.status for appending the configuration named by
-# TAGNAME from the matching tagged config vars.
-AC_DEFUN([AC_LIBTOOL_CONFIG],
-[# The else clause should only fire when bootstrapping the
-# libtool distribution, otherwise you forgot to ship ltmain.sh
-# with your package, and you will get complaints that there are
-# no rules to generate ltmain.sh.
-if test -f "$ltmain"; then
- # See if we are running on zsh, and set the options which allow our commands through
- # without removal of \ escapes.
- if test -n "${ZSH_VERSION+set}" ; then
- setopt NO_GLOB_SUBST
- fi
- # Now quote all the things that may contain metacharacters while being
- # careful not to overquote the AC_SUBSTed values. We take copies of the
- # variables and quote the copies for generation of the libtool script.
- for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
- SED SHELL STRIP \
- libname_spec library_names_spec soname_spec extract_expsyms_cmds \
- old_striplib striplib file_magic_cmd finish_cmds finish_eval \
- deplibs_check_method reload_flag reload_cmds need_locks \
- lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
- lt_cv_sys_global_symbol_to_c_name_address \
- sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
- old_postinstall_cmds old_postuninstall_cmds \
- _LT_AC_TAGVAR(compiler, $1) \
- _LT_AC_TAGVAR(CC, $1) \
- _LT_AC_TAGVAR(LD, $1) \
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1) \
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1) \
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1) \
- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) \
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1) \
- _LT_AC_TAGVAR(thread_safe_flag_spec, $1) \
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1) \
- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1) \
- _LT_AC_TAGVAR(old_archive_cmds, $1) \
- _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) \
- _LT_AC_TAGVAR(predep_objects, $1) \
- _LT_AC_TAGVAR(postdep_objects, $1) \
- _LT_AC_TAGVAR(predeps, $1) \
- _LT_AC_TAGVAR(postdeps, $1) \
- _LT_AC_TAGVAR(compiler_lib_search_path, $1) \
- _LT_AC_TAGVAR(archive_cmds, $1) \
- _LT_AC_TAGVAR(archive_expsym_cmds, $1) \
- _LT_AC_TAGVAR(postinstall_cmds, $1) \
- _LT_AC_TAGVAR(postuninstall_cmds, $1) \
- _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) \
- _LT_AC_TAGVAR(allow_undefined_flag, $1) \
- _LT_AC_TAGVAR(no_undefined_flag, $1) \
- _LT_AC_TAGVAR(export_symbols_cmds, $1) \
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) \
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) \
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1) \
- _LT_AC_TAGVAR(hardcode_automatic, $1) \
- _LT_AC_TAGVAR(module_cmds, $1) \
- _LT_AC_TAGVAR(module_expsym_cmds, $1) \
- _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) \
- _LT_AC_TAGVAR(fix_srcfile_path, $1) \
- _LT_AC_TAGVAR(exclude_expsyms, $1) \
- _LT_AC_TAGVAR(include_expsyms, $1); do
-
- case $var in
- _LT_AC_TAGVAR(old_archive_cmds, $1) | \
- _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) | \
- _LT_AC_TAGVAR(archive_cmds, $1) | \
- _LT_AC_TAGVAR(archive_expsym_cmds, $1) | \
- _LT_AC_TAGVAR(module_cmds, $1) | \
- _LT_AC_TAGVAR(module_expsym_cmds, $1) | \
- _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) | \
- _LT_AC_TAGVAR(export_symbols_cmds, $1) | \
- extract_expsyms_cmds | reload_cmds | finish_cmds | \
- postinstall_cmds | postuninstall_cmds | \
- old_postinstall_cmds | old_postuninstall_cmds | \
- sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
- # Double-quote double-evaled strings.
- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
- ;;
- *)
- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
- ;;
- esac
- done
-
- case $lt_echo in
- *'\[$]0 --fallback-echo"')
- lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\[$]0 --fallback-echo"[$]/[$]0 --fallback-echo"/'`
- ;;
- esac
-
-ifelse([$1], [],
- [cfgfile="${ofile}T"
- trap "$rm \"$cfgfile\"; exit 1" 1 2 15
- $rm -f "$cfgfile"
- AC_MSG_NOTICE([creating $ofile])],
- [cfgfile="$ofile"])
-
- cat <<__EOF__ >> "$cfgfile"
-ifelse([$1], [],
-[#! $SHELL
-
-# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
-# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
-# NOTE: Changes made to this file will be lost: look at ltmain.sh.
-#
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
-# Free Software Foundation, Inc.
-#
-# This file is part of GNU Libtool:
-# Originally by Gordon Matzigkeit <gord at gnu.ai.mit.edu>, 1996
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# A sed program that does not truncate output.
-SED=$lt_SED
-
-# Sed that helps us avoid accidentally triggering echo(1) options like -n.
-Xsed="$SED -e 1s/^X//"
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-# The names of the tagged configurations supported by this script.
-available_tags=
-
-# ### BEGIN LIBTOOL CONFIG],
-[# ### BEGIN LIBTOOL TAG CONFIG: $tagname])
-
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-
-# Shell to use when invoking shell scripts.
-SHELL=$lt_SHELL
-
-# Whether or not to build shared libraries.
-build_libtool_libs=$enable_shared
-
-# Whether or not to build static libraries.
-build_old_libs=$enable_static
-
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)
-
-# Whether or not to disallow shared libs when runtime libs are static
-allow_libtool_libs_with_static_runtimes=$_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)
-
-# Whether or not to optimize for fast installation.
-fast_install=$enable_fast_install
-
-# The host system.
-host_alias=$host_alias
-host=$host
-host_os=$host_os
-
-# The build system.
-build_alias=$build_alias
-build=$build
-build_os=$build_os
-
-# An echo program that does not interpret backslashes.
-echo=$lt_echo
-
-# The archiver.
-AR=$lt_AR
-AR_FLAGS=$lt_AR_FLAGS
-
-# A C compiler.
-LTCC=$lt_LTCC
-
-# LTCC compiler flags.
-LTCFLAGS=$lt_LTCFLAGS
-
-# A language-specific compiler.
-CC=$lt_[]_LT_AC_TAGVAR(compiler, $1)
-
-# Is the compiler the GNU C compiler?
-with_gcc=$_LT_AC_TAGVAR(GCC, $1)
-
-# An ERE matcher.
-EGREP=$lt_EGREP
-
-# The linker used to build libraries.
-LD=$lt_[]_LT_AC_TAGVAR(LD, $1)
-
-# Whether we need hard or soft links.
-LN_S=$lt_LN_S
-
-# A BSD-compatible nm program.
-NM=$lt_NM
-
-# A symbol stripping program
-STRIP=$lt_STRIP
-
-# Used to examine libraries when file_magic_cmd begins "file"
-MAGIC_CMD=$MAGIC_CMD
-
-# Used on cygwin: DLL creation program.
-DLLTOOL="$DLLTOOL"
-
-# Used on cygwin: object dumper.
-OBJDUMP="$OBJDUMP"
-
-# Used on cygwin: assembler.
-AS="$AS"
-
-# The name of the directory that contains temporary libtool files.
-objdir=$objdir
-
-# How to create reloadable object files.
-reload_flag=$lt_reload_flag
-reload_cmds=$lt_reload_cmds
-
-# How to pass a linker flag through the compiler.
-wl=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
-
-# Object file suffix (normally "o").
-objext="$ac_objext"
-
-# Old archive suffix (normally "a").
-libext="$libext"
-
-# Shared library suffix (normally ".so").
-shrext_cmds='$shrext_cmds'
-
-# Executable file suffix (normally "").
-exeext="$exeext"
-
-# Additional compiler flags for building library objects.
-pic_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)
-pic_mode=$pic_mode
-
-# What is the maximum length of a command?
-max_cmd_len=$lt_cv_sys_max_cmd_len
-
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)
-
-# Must we lock files when doing compilation?
-need_locks=$lt_need_locks
-
-# Do we need the lib prefix for modules?
-need_lib_prefix=$need_lib_prefix
-
-# Do we need a version for libraries?
-need_version=$need_version
-
-# Whether dlopen is supported.
-dlopen_support=$enable_dlopen
-
-# Whether dlopen of programs is supported.
-dlopen_self=$enable_dlopen_self
-
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=$enable_dlopen_self_static
-
-# Compiler flag to prevent dynamic linking.
-link_static_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_static, $1)
-
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)
-
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec=$lt_[]_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)
-
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec=$lt_[]_LT_AC_TAGVAR(whole_archive_flag_spec, $1)
-
-# Compiler flag to generate thread-safe objects.
-thread_safe_flag_spec=$lt_[]_LT_AC_TAGVAR(thread_safe_flag_spec, $1)
-
-# Library versioning type.
-version_type=$version_type
-
-# Format of library name prefix.
-libname_spec=$lt_libname_spec
-
-# List of archive names. First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME.
-library_names_spec=$lt_library_names_spec
-
-# The coded name of the library, if different from the real name.
-soname_spec=$lt_soname_spec
-
-# Commands used to build and install an old-style archive.
-RANLIB=$lt_RANLIB
-old_archive_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_cmds, $1)
-old_postinstall_cmds=$lt_old_postinstall_cmds
-old_postuninstall_cmds=$lt_old_postuninstall_cmds
-
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_new_cmds, $1)
-
-# Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)
-
-# Commands used to build and install a shared archive.
-archive_cmds=$lt_[]_LT_AC_TAGVAR(archive_cmds, $1)
-archive_expsym_cmds=$lt_[]_LT_AC_TAGVAR(archive_expsym_cmds, $1)
-postinstall_cmds=$lt_postinstall_cmds
-postuninstall_cmds=$lt_postuninstall_cmds
-
-# Commands used to build a loadable module (assumed same as above if empty)
-module_cmds=$lt_[]_LT_AC_TAGVAR(module_cmds, $1)
-module_expsym_cmds=$lt_[]_LT_AC_TAGVAR(module_expsym_cmds, $1)
-
-# Commands to strip libraries.
-old_striplib=$lt_old_striplib
-striplib=$lt_striplib
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predep_objects=$lt_[]_LT_AC_TAGVAR(predep_objects, $1)
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdep_objects=$lt_[]_LT_AC_TAGVAR(postdep_objects, $1)
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predeps=$lt_[]_LT_AC_TAGVAR(predeps, $1)
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdeps=$lt_[]_LT_AC_TAGVAR(postdeps, $1)
-
-# The library search path used internally by the compiler when linking
-# a shared library.
-compiler_lib_search_path=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1)
-
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method=$lt_deplibs_check_method
-
-# Command to use when deplibs_check_method == file_magic.
-file_magic_cmd=$lt_file_magic_cmd
-
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=$lt_[]_LT_AC_TAGVAR(allow_undefined_flag, $1)
-
-# Flag that forces no undefined symbols.
-no_undefined_flag=$lt_[]_LT_AC_TAGVAR(no_undefined_flag, $1)
-
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds=$lt_finish_cmds
-
-# Same as above, but a single script fragment to be evaled but not shown.
-finish_eval=$lt_finish_eval
-
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-
-# Transform the output of nm in a proper C declaration
-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-
-# Transform the output of nm in a C name address pair
-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-
-# This is the shared library runtime path variable.
-runpath_var=$runpath_var
-
-# This is the shared library path variable.
-shlibpath_var=$shlibpath_var
-
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-
-# How to hardcode a shared library path into an executable.
-hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1)
-
-# Whether we should hardcode library paths into libraries.
-hardcode_into_libs=$hardcode_into_libs
-
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)
-
-# If ld is used when linking, flag to hardcode \$libdir into
-# a binary during linking. This must work even if \$libdir does
-# not exist.
-hardcode_libdir_flag_spec_ld=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)
-
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1)
-
-# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct=$_LT_AC_TAGVAR(hardcode_direct, $1)
-
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L=$_LT_AC_TAGVAR(hardcode_minus_L, $1)
-
-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-# the resulting binary.
-hardcode_shlibpath_var=$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)
-
-# Set to yes if building a shared library automatically hardcodes DIR into the library
-# and all subsequent libraries and executables linked against it.
-hardcode_automatic=$_LT_AC_TAGVAR(hardcode_automatic, $1)
-
-# Variables whose values should be saved in libtool wrapper scripts and
-# restored at relink time.
-variables_saved_for_relink="$variables_saved_for_relink"
-
-# Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=$_LT_AC_TAGVAR(link_all_deplibs, $1)
-
-# Compile-time system search path for libraries
-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-
-# Run-time system search path for libraries
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-
-# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path=$lt_fix_srcfile_path
-
-# Set to yes if exported symbols are required.
-always_export_symbols=$_LT_AC_TAGVAR(always_export_symbols, $1)
-
-# The commands to list exported symbols.
-export_symbols_cmds=$lt_[]_LT_AC_TAGVAR(export_symbols_cmds, $1)
-
-# The commands to extract the exported symbol list from a shared archive.
-extract_expsyms_cmds=$lt_extract_expsyms_cmds
-
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms=$lt_[]_LT_AC_TAGVAR(exclude_expsyms, $1)
-
-# Symbols that must always be exported.
-include_expsyms=$lt_[]_LT_AC_TAGVAR(include_expsyms, $1)
-
-ifelse([$1],[],
-[# ### END LIBTOOL CONFIG],
-[# ### END LIBTOOL TAG CONFIG: $tagname])
-
-__EOF__
-
-ifelse([$1],[], [
- case $host_os in
- aix3*)
- cat <<\EOF >> "$cfgfile"
-
-# AIX sometimes has problems with the GCC collect2 program. For some
-# reason, if we set the COLLECT_NAMES environment variable, the problems
-# vanish in a puff of smoke.
-if test "X${COLLECT_NAMES+set}" != Xset; then
- COLLECT_NAMES=
- export COLLECT_NAMES
-fi
-EOF
- ;;
- esac
-
- # We use sed instead of cat because bash on DJGPP gets confused if
- # if finds mixed CR/LF and LF-only lines. Since sed operates in
- # text mode, it properly converts lines to CR/LF. This bash problem
- # is reportedly fixed, but why not run on old versions too?
- sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1)
-
- mv -f "$cfgfile" "$ofile" || \
- (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
- chmod +x "$ofile"
-])
-else
- # If there is no Makefile yet, we rely on a make rule to execute
- # `config.status --recheck' to rerun these tests and create the
- # libtool script then.
- ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
- if test -f "$ltmain_in"; then
- test -f Makefile && make "$ltmain"
- fi
-fi
-])# AC_LIBTOOL_CONFIG
-
-
-# AC_LIBTOOL_PROG_COMPILER_NO_RTTI([TAGNAME])
-# -------------------------------------------
-AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI],
-[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
-
-_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
-
-if test "$GCC" = yes; then
- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
-
- AC_LIBTOOL_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
- lt_cv_prog_compiler_rtti_exceptions,
- [-fno-rtti -fno-exceptions], [],
- [_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
-fi
-])# AC_LIBTOOL_PROG_COMPILER_NO_RTTI
-
-
-# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
-# ---------------------------------
-AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE],
-[AC_REQUIRE([AC_CANONICAL_HOST])
-AC_REQUIRE([LT_AC_PROG_SED])
-AC_REQUIRE([AC_PROG_NM])
-AC_REQUIRE([AC_OBJEXT])
-# Check for command to grab the raw symbol name followed by C symbol from nm.
-AC_MSG_CHECKING([command to parse $NM output from $compiler object])
-AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe],
-[
-# These are sane defaults that work on at least a few old systems.
-# [They come from Ultrix. What could be older than Ultrix?!! ;)]
-
-# Character class describing NM global symbol codes.
-symcode='[[BCDEGRST]]'
-
-# Regexp to match symbols that can be accessed directly from C.
-sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
-
-# Transform an extracted symbol line into a proper C declaration
-lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'"
-
-# Transform an extracted symbol line into symbol name and symbol address
-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
-
-# Define system-specific variables.
-case $host_os in
-aix*)
- symcode='[[BCDT]]'
- ;;
-cygwin* | mingw* | pw32*)
- symcode='[[ABCDGISTW]]'
- ;;
-hpux*) # Its linker distinguishes data from code symbols
- if test "$host_cpu" = ia64; then
- symcode='[[ABCDEGRST]]'
- fi
- lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
- lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
- ;;
-linux* | k*bsd*-gnu)
- if test "$host_cpu" = ia64; then
- symcode='[[ABCDGIRSTW]]'
- lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
- lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
- fi
- ;;
-irix* | nonstopux*)
- symcode='[[BCDEGRST]]'
- ;;
-osf*)
- symcode='[[BCDEGQRST]]'
- ;;
-solaris*)
- symcode='[[BDRT]]'
- ;;
-sco3.2v5*)
- symcode='[[DT]]'
- ;;
-sysv4.2uw2*)
- symcode='[[DT]]'
- ;;
-sysv5* | sco5v6* | unixware* | OpenUNIX*)
- symcode='[[ABDT]]'
- ;;
-sysv4)
- symcode='[[DFNSTU]]'
- ;;
-esac
-
-# Handle CRLF in mingw tool chain
-opt_cr=
-case $build_os in
-mingw*)
- opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
- ;;
-esac
-
-# If we're using GNU nm, then use its standard symbol codes.
-case `$NM -V 2>&1` in
-*GNU* | *'with BFD'*)
- symcode='[[ABCDGIRSTW]]' ;;
-esac
-
-# Try without a prefix undercore, then with it.
-for ac_symprfx in "" "_"; do
-
- # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
- symxfrm="\\1 $ac_symprfx\\2 \\2"
-
- # Write the raw and C identifiers.
- lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
-
- # Check to see that the pipe works correctly.
- pipe_works=no
-
- rm -f conftest*
- cat > conftest.$ac_ext <<EOF
-#ifdef __cplusplus
-extern "C" {
-#endif
-char nm_test_var;
-void nm_test_func(){}
-#ifdef __cplusplus
-}
-#endif
-int main(){nm_test_var='a';nm_test_func();return(0);}
-EOF
-
- if AC_TRY_EVAL(ac_compile); then
- # Now try to grab the symbols.
- nlist=conftest.nm
- if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then
- # Try sorting and uniquifying the output.
- if sort "$nlist" | uniq > "$nlist"T; then
- mv -f "$nlist"T "$nlist"
- else
- rm -f "$nlist"T
- fi
-
- # Make sure that we snagged all the symbols we need.
- if grep ' nm_test_var$' "$nlist" >/dev/null; then
- if grep ' nm_test_func$' "$nlist" >/dev/null; then
- cat <<EOF > conftest.$ac_ext
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-EOF
- # Now generate the symbol file.
- eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext'
-
- cat <<EOF >> conftest.$ac_ext
-#if defined (__STDC__) && __STDC__
-# define lt_ptr_t void *
-#else
-# define lt_ptr_t char *
-# define const
-#endif
-
-/* The mapping between symbol names and symbols. */
-const struct {
- const char *name;
- lt_ptr_t address;
-}
-lt_preloaded_symbols[[]] =
-{
-EOF
- $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext
- cat <<\EOF >> conftest.$ac_ext
- {0, (lt_ptr_t) 0}
-};
-
-#ifdef __cplusplus
-}
-#endif
-EOF
- # Now try linking the two files.
- mv conftest.$ac_objext conftstm.$ac_objext
- lt_save_LIBS="$LIBS"
- lt_save_CFLAGS="$CFLAGS"
- LIBS="conftstm.$ac_objext"
- CFLAGS="$CFLAGS$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
- if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
- pipe_works=yes
- fi
- LIBS="$lt_save_LIBS"
- CFLAGS="$lt_save_CFLAGS"
- else
- echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
- fi
- else
- echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD
- fi
- else
- echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD
- fi
- else
- echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
- cat conftest.$ac_ext >&5
- fi
- rm -f conftest* conftst*
-
- # Do not use the global_symbol_pipe unless it works.
- if test "$pipe_works" = yes; then
- break
- else
- lt_cv_sys_global_symbol_pipe=
- fi
-done
-])
-if test -z "$lt_cv_sys_global_symbol_pipe"; then
- lt_cv_sys_global_symbol_to_cdecl=
-fi
-if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
- AC_MSG_RESULT(failed)
-else
- AC_MSG_RESULT(ok)
-fi
-]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
-
-
-# AC_LIBTOOL_PROG_COMPILER_PIC([TAGNAME])
-# ---------------------------------------
-AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC],
-[_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)=
-_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=
-
-AC_MSG_CHECKING([for $compiler option to produce PIC])
- ifelse([$1],[CXX],[
- # C++ specific cases for pic, static, wl, etc.
- if test "$GXX" = yes; then
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
-
- case $host_os in
- aix*)
- # All AIX code is PIC.
- if test "$host_cpu" = ia64; then
- # AIX 5 now supports IA64 processor
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- fi
- ;;
- amigaos*)
- # FIXME: we need at least 68020 code to build shared libraries, but
- # adding the `-m68020' flag to GCC prevents building anything better,
- # like `-m68040'.
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
- ;;
- beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
- # PIC is the default for these OSes.
- ;;
- mingw* | cygwin* | os2* | pw32*)
- # This hack is so that the source file can tell whether it is being
- # built for inclusion in a dll (and should export symbols for example).
- # Although the cygwin gcc ignores -fPIC, still need this for old-style
- # (--disable-auto-import) libraries
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
- ;;
- darwin* | rhapsody*)
- # PIC is the default on this platform
- # Common symbols not allowed in MH_DYLIB files
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
- ;;
- *djgpp*)
- # DJGPP does not support shared libraries at all
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
- ;;
- interix[[3-9]]*)
- # Interix 3.x gcc -fpic/-fPIC options generate broken code.
- # Instead, we relocate shared libraries at runtime.
- ;;
- sysv4*MP*)
- if test -d /usr/nec; then
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
- fi
- ;;
- hpux*)
- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
- # not for PA HP-UX.
- case $host_cpu in
- hppa*64*|ia64*)
- ;;
- *)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
- ;;
- esac
- ;;
- *)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
- ;;
- esac
- else
- case $host_os in
- aix4* | aix5*)
- # All AIX code is PIC.
- if test "$host_cpu" = ia64; then
- # AIX 5 now supports IA64 processor
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- else
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
- fi
- ;;
- chorus*)
- case $cc_basename in
- cxch68*)
- # Green Hills C++ Compiler
- # _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
- ;;
- esac
- ;;
- darwin*)
- # PIC is the default on this platform
- # Common symbols not allowed in MH_DYLIB files
- case $cc_basename in
- xlc*)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon'
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- ;;
- esac
- ;;
- dgux*)
- case $cc_basename in
- ec++*)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- ;;
- ghcx*)
- # Green Hills C++ Compiler
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
- ;;
- *)
- ;;
- esac
- ;;
- freebsd* | dragonfly*)
- # FreeBSD uses GNU C++
- ;;
- hpux9* | hpux10* | hpux11*)
- case $cc_basename in
- CC*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
- if test "$host_cpu" != ia64; then
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
- fi
- ;;
- aCC*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
- case $host_cpu in
- hppa*64*|ia64*)
- # +Z the default
- ;;
- *)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
- ;;
- esac
- ;;
- *)
- ;;
- esac
- ;;
- interix*)
- # This is c89, which is MS Visual C++ (no shared libs)
- # Anyone wants to do a port?
- ;;
- irix5* | irix6* | nonstopux*)
- case $cc_basename in
- CC*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
- # CC pic flag -KPIC is the default.
- ;;
- *)
- ;;
- esac
- ;;
- linux* | k*bsd*-gnu)
- case $cc_basename in
- KCC*)
- # KAI C++ Compiler
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
- ;;
- icpc* | ecpc*)
- # Intel C++
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
- ;;
- pgCC*)
- # Portland Group C++ compiler.
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- ;;
- cxx*)
- # Compaq C++
- # Make sure the PIC flag is empty. It appears that all Alpha
- # Linux and Compaq Tru64 Unix objects are PIC.
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
- ;;
- *)
- case `$CC -V 2>&1 | sed 5q` in
- *Sun\ C*)
- # Sun C++ 5.9
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
- ;;
- esac
- ;;
- esac
- ;;
- lynxos*)
- ;;
- m88k*)
- ;;
- mvs*)
- case $cc_basename in
- cxx*)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
- ;;
- *)
- ;;
- esac
- ;;
- netbsd*)
- ;;
- osf3* | osf4* | osf5*)
- case $cc_basename in
- KCC*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
- ;;
- RCC*)
- # Rational C++ 2.4.1
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
- ;;
- cxx*)
- # Digital/Compaq C++
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- # Make sure the PIC flag is empty. It appears that all Alpha
- # Linux and Compaq Tru64 Unix objects are PIC.
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
- ;;
- *)
- ;;
- esac
- ;;
- psos*)
- ;;
- solaris*)
- case $cc_basename in
- CC*)
- # Sun C++ 4.2, 5.x and Centerline C++
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
- ;;
- gcx*)
- # Green Hills C++ Compiler
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
- ;;
- *)
- ;;
- esac
- ;;
- sunos4*)
- case $cc_basename in
- CC*)
- # Sun C++ 4.x
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- ;;
- lcc*)
- # Lucid
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
- ;;
- *)
- ;;
- esac
- ;;
- tandem*)
- case $cc_basename in
- NCC*)
- # NonStop-UX NCC 3.20
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- ;;
- *)
- ;;
- esac
- ;;
- sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
- case $cc_basename in
- CC*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- ;;
- esac
- ;;
- vxworks*)
- ;;
- *)
- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
- ;;
- esac
- fi
-],
-[
- if test "$GCC" = yes; then
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
-
- case $host_os in
- aix*)
- # All AIX code is PIC.
- if test "$host_cpu" = ia64; then
- # AIX 5 now supports IA64 processor
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- fi
- ;;
-
- amigaos*)
- # FIXME: we need at least 68020 code to build shared libraries, but
- # adding the `-m68020' flag to GCC prevents building anything better,
- # like `-m68040'.
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
- ;;
-
- beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
- # PIC is the default for these OSes.
- ;;
-
- mingw* | cygwin* | pw32* | os2*)
- # This hack is so that the source file can tell whether it is being
- # built for inclusion in a dll (and should export symbols for example).
- # Although the cygwin gcc ignores -fPIC, still need this for old-style
- # (--disable-auto-import) libraries
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
- ;;
-
- darwin* | rhapsody*)
- # PIC is the default on this platform
- # Common symbols not allowed in MH_DYLIB files
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
- ;;
-
- interix[[3-9]]*)
- # Interix 3.x gcc -fpic/-fPIC options generate broken code.
- # Instead, we relocate shared libraries at runtime.
- ;;
-
- msdosdjgpp*)
- # Just because we use GCC doesn't mean we suddenly get shared libraries
- # on systems that don't support them.
- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
- enable_shared=no
- ;;
-
- sysv4*MP*)
- if test -d /usr/nec; then
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
- fi
- ;;
-
- hpux*)
- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
- # not for PA HP-UX.
- case $host_cpu in
- hppa*64*|ia64*)
- # +Z the default
- ;;
- *)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
- ;;
- esac
- ;;
-
- *)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
- ;;
- esac
- else
- # PORTME Check for flag to pass linker flags through the system compiler.
- case $host_os in
- aix*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- if test "$host_cpu" = ia64; then
- # AIX 5 now supports IA64 processor
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- else
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
- fi
- ;;
- darwin*)
- # PIC is the default on this platform
- # Common symbols not allowed in MH_DYLIB files
- case $cc_basename in
- xlc*)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon'
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- ;;
- esac
- ;;
-
- mingw* | cygwin* | pw32* | os2*)
- # This hack is so that the source file can tell whether it is being
- # built for inclusion in a dll (and should export symbols for example).
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
- ;;
-
- hpux9* | hpux10* | hpux11*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
- # not for PA HP-UX.
- case $host_cpu in
- hppa*64*|ia64*)
- # +Z the default
- ;;
- *)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
- ;;
- esac
- # Is there a better lt_prog_compiler_static that works with the bundled CC?
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
- ;;
-
- irix5* | irix6* | nonstopux*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- # PIC (with -KPIC) is the default.
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
- ;;
-
- newsos6)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- ;;
-
- linux* | k*bsd*-gnu)
- case $cc_basename in
- icc* | ecc*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
- ;;
- pgcc* | pgf77* | pgf90* | pgf95*)
- # Portland Group compilers (*not* the Pentium gcc compiler,
- # which looks to be a dead project)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- ;;
- ccc*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- # All Alpha code is PIC.
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
- ;;
- *)
- case `$CC -V 2>&1 | sed 5q` in
- *Sun\ C*)
- # Sun C 5.9
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- ;;
- *Sun\ F*)
- # Sun Fortran 8.3 passes all unrecognized flags to the linker
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)=''
- ;;
- esac
- ;;
- esac
- ;;
-
- osf3* | osf4* | osf5*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- # All OSF/1 code is PIC.
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
- ;;
-
- rdos*)
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
- ;;
-
- solaris*)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- case $cc_basename in
- f77* | f90* | f95*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
- *)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
- esac
- ;;
-
- sunos4*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- ;;
-
- sysv4 | sysv4.2uw2* | sysv4.3*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- ;;
-
- sysv4*MP*)
- if test -d /usr/nec ;then
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- fi
- ;;
-
- sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- ;;
-
- unicos*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
- ;;
-
- uts4*)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- ;;
-
- *)
- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
- ;;
- esac
- fi
-])
-AC_MSG_RESULT([$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)])
-
-#
-# Check to make sure the PIC flag actually works.
-#
-if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then
- AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) works],
- _LT_AC_TAGVAR(lt_prog_compiler_pic_works, $1),
- [$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])], [],
- [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) in
- "" | " "*) ;;
- *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)" ;;
- esac],
- [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
-fi
-case $host_os in
- # For platforms which do not support PIC, -DPIC is meaningless:
- *djgpp*)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
- ;;
- *)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])"
- ;;
-esac
-
-#
-# Check to make sure the static flag actually works.
-#
-wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_AC_TAGVAR(lt_prog_compiler_static, $1)\"
-AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works],
- _LT_AC_TAGVAR(lt_prog_compiler_static_works, $1),
- $lt_tmp_static_flag,
- [],
- [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=])
-])
-
-
-# AC_LIBTOOL_PROG_LD_SHLIBS([TAGNAME])
-# ------------------------------------
-# See if the linker supports building shared libraries.
-AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
-AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
-ifelse([$1],[CXX],[
- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
- case $host_os in
- aix4* | aix5*)
- # If we're using GNU nm, then we don't want the "-C" option.
- # -C means demangle to AIX nm, but means don't demangle with GNU nm
- if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
- else
- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
- fi
- ;;
- pw32*)
- _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
- ;;
- cygwin* | mingw*)
- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
- ;;
- *)
- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
- ;;
- esac
-],[
- runpath_var=
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=
- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
- _LT_AC_TAGVAR(archive_cmds, $1)=
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)=
- _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)=
- _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)=
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
- _LT_AC_TAGVAR(thread_safe_flag_spec, $1)=
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
- _LT_AC_TAGVAR(hardcode_direct, $1)=no
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=no
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
- _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
- _LT_AC_TAGVAR(hardcode_automatic, $1)=no
- _LT_AC_TAGVAR(module_cmds, $1)=
- _LT_AC_TAGVAR(module_expsym_cmds, $1)=
- _LT_AC_TAGVAR(always_export_symbols, $1)=no
- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
- # include_expsyms should be a list of space-separated symbols to be *always*
- # included in the symbol list
- _LT_AC_TAGVAR(include_expsyms, $1)=
- # exclude_expsyms can be an extended regexp of symbols to exclude
- # it will be wrapped by ` (' and `)$', so one must not match beginning or
- # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
- # as well as any symbol that contains `d'.
- _LT_AC_TAGVAR(exclude_expsyms, $1)="_GLOBAL_OFFSET_TABLE_"
- # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
- # platforms (ab)use it in PIC code, but their linkers get confused if
- # the symbol is explicitly referenced. Since portable code cannot
- # rely on this symbol name, it's probably fine to never include it in
- # preloaded symbol tables.
- extract_expsyms_cmds=
- # Just being paranoid about ensuring that cc_basename is set.
- _LT_CC_BASENAME([$compiler])
- case $host_os in
- cygwin* | mingw* | pw32*)
- # FIXME: the MSVC++ port hasn't been tested in a loooong time
- # When not using gcc, we currently assume that we are using
- # Microsoft Visual C++.
- if test "$GCC" != yes; then
- with_gnu_ld=no
- fi
- ;;
- interix*)
- # we just hope/assume this is gcc and not c89 (= MSVC++)
- with_gnu_ld=yes
- ;;
- openbsd*)
- with_gnu_ld=no
- ;;
- esac
-
- _LT_AC_TAGVAR(ld_shlibs, $1)=yes
- if test "$with_gnu_ld" = yes; then
- # If archive_cmds runs LD, not CC, wlarc should be empty
- wlarc='${wl}'
-
- # Set some defaults for GNU ld with shared library support. These
- # are reset later if shared libraries are not supported. Putting them
- # here allows them to be overridden if necessary.
- runpath_var=LD_RUN_PATH
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
- # ancient GNU ld didn't support --whole-archive et. al.
- if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
- else
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
- fi
- supports_anon_versioning=no
- case `$LD -v 2>/dev/null` in
- *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
- *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
- *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
- *\ 2.11.*) ;; # other 2.11 versions
- *) supports_anon_versioning=yes ;;
- esac
-
- # See if GNU ld supports shared libraries.
- case $host_os in
- aix3* | aix4* | aix5*)
- # On AIX/PPC, the GNU linker is very broken
- if test "$host_cpu" != ia64; then
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- cat <<EOF 1>&2
-
-*** Warning: the GNU linker, at least up to release 2.9.1, is reported
-*** to be unable to reliably create shared libraries on AIX.
-*** Therefore, libtool is disabling shared libraries support. If you
-*** really care for shared libraries, you may want to modify your PATH
-*** so that a non-GNU linker is found, and then restart.
-
-EOF
- fi
- ;;
-
- amigaos*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-
- # Samuel A. Falvo II <kc5tja at dolphin.openprojects.net> reports
- # that the semantics of dynamic libraries on AmigaOS, at least up
- # to version 4, is to share data among multiple programs linked
- # with the same dynamic library. Since this doesn't match the
- # behavior of shared libraries on other platforms, we can't use
- # them.
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
-
- beos*)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
- # Joseph Beckenbach <jrb3 at best.com> says some releases of gcc
- # support --undefined. This deserves some investigation. FIXME
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- else
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
-
- cygwin* | mingw* | pw32*)
- # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
- # as there is no search path for DLLs.
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
- _LT_AC_TAGVAR(always_export_symbols, $1)=no
- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/'\'' -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
-
- if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- # If the export-symbols file already is a .def file (1st line
- # is EXPORTS), use it as is; otherwise, prepend...
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
- cp $export_symbols $output_objdir/$soname.def;
- else
- echo EXPORTS > $output_objdir/$soname.def;
- cat $export_symbols >> $output_objdir/$soname.def;
- fi~
- $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- else
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
-
- interix[[3-9]]*)
- _LT_AC_TAGVAR(hardcode_direct, $1)=no
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
- # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
- # Instead, shared libraries are loaded at an image base (0x10000000 by
- # default) and relocated if they conflict, which is a slow very memory
- # consuming and fragmenting process. To avoid this, we pick a random,
- # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
- # time. Moving up from 0x10000000 also allows more sbrk(2) space.
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- ;;
-
- gnu* | linux* | k*bsd*-gnu)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- tmp_addflag=
- case $cc_basename,$host_cpu in
- pgcc*) # Portland Group C compiler
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
- tmp_addflag=' $pic_flag'
- ;;
- pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
- tmp_addflag=' $pic_flag -Mnomain' ;;
- ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
- tmp_addflag=' -i_dynamic' ;;
- efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64
- tmp_addflag=' -i_dynamic -nofor_main' ;;
- ifc* | ifort*) # Intel Fortran compiler
- tmp_addflag=' -nofor_main' ;;
- esac
- case `$CC -V 2>&1 | sed 5q` in
- *Sun\ C*) # Sun C 5.9
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
- tmp_sharedflag='-G' ;;
- *Sun\ F*) # Sun Fortran 8.3
- tmp_sharedflag='-G' ;;
- *)
- tmp_sharedflag='-shared' ;;
- esac
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-
- if test $supports_anon_versioning = yes; then
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $output_objdir/$libname.ver~
- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
- $echo "local: *; };" >> $output_objdir/$libname.ver~
- $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
- fi
- else
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
-
- netbsd*)
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
- wlarc=
- else
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- fi
- ;;
-
- solaris*)
- if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- cat <<EOF 1>&2
-
-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
-*** create shared libraries on Solaris systems. Therefore, libtool
-*** is disabling shared libraries support. We urge you to upgrade GNU
-*** binutils to release 2.9.1 or newer. Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
-
-EOF
- elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- else
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
-
- sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
- case `$LD -v 2>&1` in
- *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*)
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- cat <<_LT_EOF 1>&2
-
-*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
-*** reliably create shared libraries on SCO systems. Therefore, libtool
-*** is disabling shared libraries support. We urge you to upgrade GNU
-*** binutils to release 2.16.91.0.3 or newer. Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
-
-_LT_EOF
- ;;
- *)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
- else
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
- esac
- ;;
-
- sunos4*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- wlarc=
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
-
- *)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- else
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
- esac
-
- if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no; then
- runpath_var=
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
- fi
- else
- # PORTME fill in a description of your system's linker (not GNU ld)
- case $host_os in
- aix3*)
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
- _LT_AC_TAGVAR(always_export_symbols, $1)=yes
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
- # Note: this linker hardcodes the directories in LIBPATH if there
- # are no directories specified by -L.
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
- if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
- # Neither direct hardcoding nor static linking is supported with a
- # broken collect2.
- _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
- fi
- ;;
-
- aix4* | aix5*)
- if test "$host_cpu" = ia64; then
- # On IA64, the linker does run time linking by default, so we don't
- # have to do anything special.
- aix_use_runtimelinking=no
- exp_sym_flag='-Bexport'
- no_entry_flag=""
- else
- # If we're using GNU nm, then we don't want the "-C" option.
- # -C means demangle to AIX nm, but means don't demangle with GNU nm
- if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
- else
- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
- fi
- aix_use_runtimelinking=no
-
- # Test if we are trying to use run time linking or normal
- # AIX style linking. If -brtl is somewhere in LDFLAGS, we
- # need to do runtime linking.
- case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)
- for ld_flag in $LDFLAGS; do
- if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
- aix_use_runtimelinking=yes
- break
- fi
- done
- ;;
- esac
-
- exp_sym_flag='-bexport'
- no_entry_flag='-bnoentry'
- fi
-
- # When large executables or shared objects are built, AIX ld can
- # have problems creating the table of contents. If linking a library
- # or program results in "error TOC overflow" add -mminimal-toc to
- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-
- _LT_AC_TAGVAR(archive_cmds, $1)=''
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-
- if test "$GCC" = yes; then
- case $host_os in aix4.[[012]]|aix4.[[012]].*)
- # We only want to do this on AIX 4.2 and lower, the check
- # below for broken collect2 doesn't work under 4.3+
- collect2name=`${CC} -print-prog-name=collect2`
- if test -f "$collect2name" && \
- strings "$collect2name" | grep resolve_lib_name >/dev/null
- then
- # We have reworked collect2
- :
- else
- # We have old collect2
- _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
- # It fails to find uninstalled libraries when the uninstalled
- # path is not listed in the libpath. Setting hardcode_minus_L
- # to unsupported forces relinking
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
- fi
- ;;
- esac
- shared_flag='-shared'
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag="$shared_flag "'${wl}-G'
- fi
- else
- # not using gcc
- if test "$host_cpu" = ia64; then
- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
- # chokes on -Wl,-G. The following line is correct:
- shared_flag='-G'
- else
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag='${wl}-G'
- else
- shared_flag='${wl}-bM:SRE'
- fi
- fi
- fi
-
- # It seems that -bexpall does not export symbols beginning with
- # underscore (_), so it is better to generate a list of symbols to export.
- _LT_AC_TAGVAR(always_export_symbols, $1)=yes
- if test "$aix_use_runtimelinking" = yes; then
- # Warning - without using the other runtime loading flags (-brtl),
- # -berok will link without error, but may produce a broken library.
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
- # Determine the default libpath from the value encoded in an empty executable.
- _LT_AC_SYS_LIBPATH_AIX
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
- else
- if test "$host_cpu" = ia64; then
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
- _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
- else
- # Determine the default libpath from the value encoded in an empty executable.
- _LT_AC_SYS_LIBPATH_AIX
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
- # Warning - without using the other run time loading flags,
- # -berok will link without error, but may produce a broken library.
- _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
- # Exported symbols can be pulled into shared objects from archives
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
- # This is similar to how AIX traditionally builds its shared libraries.
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
- fi
- fi
- ;;
-
- amigaos*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
- # see comment about different semantics on the GNU ld section
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
-
- bsdi[[45]]*)
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
- ;;
-
- cygwin* | mingw* | pw32*)
- # When not using gcc, we currently assume that we are using
- # Microsoft Visual C++.
- # hardcode_libdir_flag_spec is actually meaningless, as there is
- # no search path for DLLs.
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
- # Tell ltmain to make .lib files, not .a files.
- libext=lib
- # Tell ltmain to make .dll files, not .so files.
- shrext_cmds=".dll"
- # FIXME: Setting linknames here is a bad hack.
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
- # The linker will automatically build a .lib file if we build a DLL.
- _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true'
- # FIXME: Should let the user specify the lib program.
- _LT_AC_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
- _LT_AC_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`'
- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
- ;;
-
- darwin* | rhapsody*)
- case $host_os in
- rhapsody* | darwin1.[[012]])
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress'
- ;;
- *) # Darwin 1.3 on
- if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
- else
- case ${MACOSX_DEPLOYMENT_TARGET} in
- 10.[[012]])
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
- ;;
- 10.*)
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup'
- ;;
- esac
- fi
- ;;
- esac
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
- _LT_AC_TAGVAR(hardcode_direct, $1)=no
- _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=''
- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
- if test "$GCC" = yes ; then
- output_verbose_link_cmd='echo'
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
- _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- else
- case $cc_basename in
- xlc*)
- output_verbose_link_cmd='echo'
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
- _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- ;;
- *)
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- esac
- fi
- ;;
-
- dgux*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
-
- freebsd1*)
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
-
- # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
- # support. Future versions do this automatically, but an explicit c++rt0.o
- # does not break anything, and helps significantly (at the cost of a little
- # extra space).
- freebsd2.2*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
-
- # Unfortunately, older versions of FreeBSD 2 do not have this feature.
- freebsd2*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
-
- # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
- freebsd* | dragonfly*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
-
- hpux9*)
- if test "$GCC" = yes; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
- else
- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
- fi
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-
- # hardcode_minus_L: Not really in the search PATH,
- # but as the default location of the library.
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
- ;;
-
- hpux10*)
- if test "$GCC" = yes -a "$with_gnu_ld" = no; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
- else
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
- fi
- if test "$with_gnu_ld" = no; then
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-
- # hardcode_minus_L: Not really in the search PATH,
- # but as the default location of the library.
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
- fi
- ;;
-
- hpux11*)
- if test "$GCC" = yes -a "$with_gnu_ld" = no; then
- case $host_cpu in
- hppa*64*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- ia64*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- *)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- esac
- else
- case $host_cpu in
- hppa*64*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- ia64*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- *)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- esac
- fi
- if test "$with_gnu_ld" = no; then
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
- case $host_cpu in
- hppa*64*|ia64*)
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
- _LT_AC_TAGVAR(hardcode_direct, $1)=no
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
- *)
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-
- # hardcode_minus_L: Not really in the search PATH,
- # but as the default location of the library.
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
- ;;
- esac
- fi
- ;;
-
- irix5* | irix6* | nonstopux*)
- if test "$GCC" = yes; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- else
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir'
- fi
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
- ;;
-
- netbsd*)
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
- else
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
- fi
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
-
- newsos6)
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
-
- openbsd*)
- if test -f /usr/libexec/ld.so; then
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
- else
- case $host_os in
- openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- ;;
- *)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- ;;
- esac
- fi
- else
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
-
- os2*)
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
- _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
- _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
- ;;
-
- osf3*)
- if test "$GCC" = yes; then
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- else
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
- fi
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
- ;;
-
- osf4* | osf5*) # as osf3* with the addition of -msym flag
- if test "$GCC" = yes; then
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- else
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
- $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
-
- # Both c and cxx compiler support -rpath directly
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
- fi
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
- ;;
-
- solaris*)
- _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text'
- if test "$GCC" = yes; then
- wlarc='${wl}'
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
- $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
- else
- wlarc=''
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
- fi
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- case $host_os in
- solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
- *)
- # The compiler driver will combine and reorder linker options,
- # but understands `-z linker_flag'. GCC discards it without `$wl',
- # but is careful enough not to reorder.
- # Supported since Solaris 2.6 (maybe 2.5.1?)
- if test "$GCC" = yes; then
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
- else
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
- fi
- ;;
- esac
- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
- ;;
-
- sunos4*)
- if test "x$host_vendor" = xsequent; then
- # Use $CC to link under sequent, because it throws in some extra .o
- # files that make .init and .fini sections work.
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
- else
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
- fi
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
-
- sysv4)
- case $host_vendor in
- sni)
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes # is this really true???
- ;;
- siemens)
- ## LD is ld it makes a PLAMLIB
- ## CC just makes a GrossModule.
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
- _LT_AC_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
- _LT_AC_TAGVAR(hardcode_direct, $1)=no
- ;;
- motorola)
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- _LT_AC_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
- ;;
- esac
- runpath_var='LD_RUN_PATH'
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
-
- sysv4.3*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
- ;;
-
- sysv4*MP*)
- if test -d /usr/nec; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- runpath_var=LD_RUN_PATH
- hardcode_runpath_var=yes
- _LT_AC_TAGVAR(ld_shlibs, $1)=yes
- fi
- ;;
-
- sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
- _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- runpath_var='LD_RUN_PATH'
-
- if test "$GCC" = yes; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- else
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- fi
- ;;
-
- sysv5* | sco3.2v5* | sco5v6*)
- # Note: We can NOT use -z defs as we might desire, because we do not
- # link with -lc, and that would cause any symbols used from libc to
- # always be unresolved, which means just about no library would
- # ever link correctly. If we're not using GNU ld we use -z text
- # though, which does catch some bad symbols but isn't as heavy-handed
- # as -z defs.
- _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
- runpath_var='LD_RUN_PATH'
-
- if test "$GCC" = yes; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- else
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- fi
- ;;
-
- uts4*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
-
- *)
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- esac
- fi
-])
-AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
-test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
-
-#
-# Do we need to explicitly link libc?
-#
-case "x$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)" in
-x|xyes)
- # Assume -lc should be added
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
-
- if test "$enable_shared" = yes && test "$GCC" = yes; then
- case $_LT_AC_TAGVAR(archive_cmds, $1) in
- *'~'*)
- # FIXME: we may have to deal with multi-command sequences.
- ;;
- '$CC '*)
- # Test whether the compiler implicitly links with -lc since on some
- # systems, -lgcc has to come before -lc. If gcc already passes -lc
- # to ld, don't add -lc before -lgcc.
- AC_MSG_CHECKING([whether -lc should be explicitly linked in])
- $rm conftest*
- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-
- if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
- soname=conftest
- lib=conftest
- libobjs=conftest.$ac_objext
- deplibs=
- wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
- pic_flag=$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)
- compiler_flags=-v
- linker_flags=-v
- verstring=
- output_objdir=.
- libname=conftest
- lt_save_allow_undefined_flag=$_LT_AC_TAGVAR(allow_undefined_flag, $1)
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=
- if AC_TRY_EVAL(_LT_AC_TAGVAR(archive_cmds, $1) 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1)
- then
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
- else
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
- fi
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
- else
- cat conftest.err 1>&5
- fi
- $rm conftest*
- AC_MSG_RESULT([$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)])
- ;;
- esac
- fi
- ;;
-esac
-])# AC_LIBTOOL_PROG_LD_SHLIBS
-
-
-# _LT_AC_FILE_LTDLL_C
-# -------------------
-# Be careful that the start marker always follows a newline.
-AC_DEFUN([_LT_AC_FILE_LTDLL_C], [
-# /* ltdll.c starts here */
-# #define WIN32_LEAN_AND_MEAN
-# #include <windows.h>
-# #undef WIN32_LEAN_AND_MEAN
-# #include <stdio.h>
-#
-# #ifndef __CYGWIN__
-# # ifdef __CYGWIN32__
-# # define __CYGWIN__ __CYGWIN32__
-# # endif
-# #endif
-#
-# #ifdef __cplusplus
-# extern "C" {
-# #endif
-# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved);
-# #ifdef __cplusplus
-# }
-# #endif
-#
-# #ifdef __CYGWIN__
-# #include <cygwin/cygwin_dll.h>
-# DECLARE_CYGWIN_DLL( DllMain );
-# #endif
-# HINSTANCE __hDllInstance_base;
-#
-# BOOL APIENTRY
-# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved)
-# {
-# __hDllInstance_base = hInst;
-# return TRUE;
-# }
-# /* ltdll.c ends here */
-])# _LT_AC_FILE_LTDLL_C
-
-
-# _LT_AC_TAGVAR(VARNAME, [TAGNAME])
-# ---------------------------------
-AC_DEFUN([_LT_AC_TAGVAR], [ifelse([$2], [], [$1], [$1_$2])])
-
-
-# old names
-AC_DEFUN([AM_PROG_LIBTOOL], [AC_PROG_LIBTOOL])
-AC_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)])
-AC_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)])
-AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
-AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
-AC_DEFUN([AM_PROG_LD], [AC_PROG_LD])
-AC_DEFUN([AM_PROG_NM], [AC_PROG_NM])
-
-# This is just to silence aclocal about the macro not being used
-ifelse([AC_DISABLE_FAST_INSTALL])
-
-AC_DEFUN([LT_AC_PROG_GCJ],
-[AC_CHECK_TOOL(GCJ, gcj, no)
- test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
- AC_SUBST(GCJFLAGS)
-])
-
-AC_DEFUN([LT_AC_PROG_RC],
-[AC_CHECK_TOOL(RC, windres, no)
-])
-
-
-# Cheap backport of AS_EXECUTABLE_P and required macros
-# from Autoconf 2.59; we should not use $as_executable_p directly.
-
-# _AS_TEST_PREPARE
-# ----------------
-m4_ifndef([_AS_TEST_PREPARE],
-[m4_defun([_AS_TEST_PREPARE],
-[if test -x / >/dev/null 2>&1; then
- as_executable_p='test -x'
-else
- as_executable_p='test -f'
-fi
-])])# _AS_TEST_PREPARE
-
-# AS_EXECUTABLE_P
-# ---------------
-# Check whether a file is executable.
-m4_ifndef([AS_EXECUTABLE_P],
-[m4_defun([AS_EXECUTABLE_P],
-[AS_REQUIRE([_AS_TEST_PREPARE])dnl
-$as_executable_p $1[]dnl
-])])# AS_EXECUTABLE_P
-
-# NOTE: This macro has been submitted for inclusion into #
-# GNU Autoconf as AC_PROG_SED. When it is available in #
-# a released version of Autoconf we should remove this #
-# macro and use it instead. #
-# LT_AC_PROG_SED
-# --------------
-# Check for a fully-functional sed program, that truncates
-# as few characters as possible. Prefer GNU sed if found.
-AC_DEFUN([LT_AC_PROG_SED],
-[AC_MSG_CHECKING([for a sed that does not truncate output])
-AC_CACHE_VAL(lt_cv_path_SED,
-[# Loop through the user's path and test for sed and gsed.
-# Then use that list of sed's as ones to test for truncation.
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for lt_ac_prog in sed gsed; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- if AS_EXECUTABLE_P(["$as_dir/$lt_ac_prog$ac_exec_ext"]); then
- lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
- fi
- done
- done
-done
-IFS=$as_save_IFS
-lt_ac_max=0
-lt_ac_count=0
-# Add /usr/xpg4/bin/sed as it is typically found on Solaris
-# along with /bin/sed that truncates output.
-for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
- test ! -f $lt_ac_sed && continue
- cat /dev/null > conftest.in
- lt_ac_count=0
- echo $ECHO_N "0123456789$ECHO_C" >conftest.in
- # Check for GNU sed and select it if it is found.
- if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
- lt_cv_path_SED=$lt_ac_sed
- break
- fi
- while true; do
- cat conftest.in conftest.in >conftest.tmp
- mv conftest.tmp conftest.in
- cp conftest.in conftest.nl
- echo >>conftest.nl
- $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
- cmp -s conftest.out conftest.nl || break
- # 10000 chars as input seems more than enough
- test $lt_ac_count -gt 10 && break
- lt_ac_count=`expr $lt_ac_count + 1`
- if test $lt_ac_count -gt $lt_ac_max; then
- lt_ac_max=$lt_ac_count
- lt_cv_path_SED=$lt_ac_sed
- fi
- done
-done
-])
-SED=$lt_cv_path_SED
-AC_SUBST([SED])
-AC_MSG_RESULT([$SED])
-])
-
-# Copyright (C) 2002, 2003, 2005, 2006 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_AUTOMAKE_VERSION(VERSION)
-# ----------------------------
-# Automake X.Y traces this macro to ensure aclocal.m4 has been
-# generated from the m4 files accompanying Automake X.Y.
-# (This private macro should not be called outside this file.)
-AC_DEFUN([AM_AUTOMAKE_VERSION],
-[am__api_version='1.10'
-dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
-dnl require some minimum version. Point them to the right macro.
-m4_if([$1], [1.10], [],
- [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
-])
-
-# _AM_AUTOCONF_VERSION(VERSION)
-# -----------------------------
-# aclocal traces this macro to find the Autoconf version.
-# This is a private macro too. Using m4_define simplifies
-# the logic in aclocal, which can simply ignore this definition.
-m4_define([_AM_AUTOCONF_VERSION], [])
-
-# AM_SET_CURRENT_AUTOMAKE_VERSION
-# -------------------------------
-# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
-# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
-AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-[AM_AUTOMAKE_VERSION([1.10])dnl
-_AM_AUTOCONF_VERSION(m4_PACKAGE_VERSION)])
-
-# AM_AUX_DIR_EXPAND -*- Autoconf -*-
-
-# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
-# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to
-# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
-#
-# Of course, Automake must honor this variable whenever it calls a
-# tool from the auxiliary directory. The problem is that $srcdir (and
-# therefore $ac_aux_dir as well) can be either absolute or relative,
-# depending on how configure is run. This is pretty annoying, since
-# it makes $ac_aux_dir quite unusable in subdirectories: in the top
-# source directory, any form will work fine, but in subdirectories a
-# relative path needs to be adjusted first.
-#
-# $ac_aux_dir/missing
-# fails when called from a subdirectory if $ac_aux_dir is relative
-# $top_srcdir/$ac_aux_dir/missing
-# fails if $ac_aux_dir is absolute,
-# fails when called from a subdirectory in a VPATH build with
-# a relative $ac_aux_dir
-#
-# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
-# are both prefixed by $srcdir. In an in-source build this is usually
-# harmless because $srcdir is `.', but things will broke when you
-# start a VPATH build or use an absolute $srcdir.
-#
-# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
-# iff we strip the leading $srcdir from $ac_aux_dir. That would be:
-# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
-# and then we would define $MISSING as
-# MISSING="\${SHELL} $am_aux_dir/missing"
-# This will work as long as MISSING is not called from configure, because
-# unfortunately $(top_srcdir) has no meaning in configure.
-# However there are other variables, like CC, which are often used in
-# configure, and could therefore not use this "fixed" $ac_aux_dir.
-#
-# Another solution, used here, is to always expand $ac_aux_dir to an
-# absolute PATH. The drawback is that using absolute paths prevent a
-# configured tree to be moved without reconfiguration.
-
-AC_DEFUN([AM_AUX_DIR_EXPAND],
-[dnl Rely on autoconf to set up CDPATH properly.
-AC_PREREQ([2.50])dnl
-# expand $ac_aux_dir to an absolute path
-am_aux_dir=`cd $ac_aux_dir && pwd`
-])
-
-# AM_CONDITIONAL -*- Autoconf -*-
-
-# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 8
-
-# AM_CONDITIONAL(NAME, SHELL-CONDITION)
-# -------------------------------------
-# Define a conditional.
-AC_DEFUN([AM_CONDITIONAL],
-[AC_PREREQ(2.52)dnl
- ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
- [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
-AC_SUBST([$1_TRUE])dnl
-AC_SUBST([$1_FALSE])dnl
-_AM_SUBST_NOTMAKE([$1_TRUE])dnl
-_AM_SUBST_NOTMAKE([$1_FALSE])dnl
-if $2; then
- $1_TRUE=
- $1_FALSE='#'
-else
- $1_TRUE='#'
- $1_FALSE=
-fi
-AC_CONFIG_COMMANDS_PRE(
-[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
- AC_MSG_ERROR([[conditional "$1" was never defined.
-Usually this means the macro was only invoked conditionally.]])
-fi])])
-
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 9
-
-# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
-# written in clear, in which case automake, when reading aclocal.m4,
-# will think it sees a *use*, and therefore will trigger all it's
-# C support machinery. Also note that it means that autoscan, seeing
-# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
-
-
-# _AM_DEPENDENCIES(NAME)
-# ----------------------
-# See how the compiler implements dependency checking.
-# NAME is "CC", "CXX", "GCJ", or "OBJC".
-# We try a few techniques and use that to set a single cache variable.
-#
-# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
-# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
-# dependency, and given that the user is not expected to run this macro,
-# just rely on AC_PROG_CC.
-AC_DEFUN([_AM_DEPENDENCIES],
-[AC_REQUIRE([AM_SET_DEPDIR])dnl
-AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
-AC_REQUIRE([AM_MAKE_INCLUDE])dnl
-AC_REQUIRE([AM_DEP_TRACK])dnl
-
-ifelse([$1], CC, [depcc="$CC" am_compiler_list=],
- [$1], CXX, [depcc="$CXX" am_compiler_list=],
- [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
- [$1], UPC, [depcc="$UPC" am_compiler_list=],
- [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
- [depcc="$$1" am_compiler_list=])
-
-AC_CACHE_CHECK([dependency style of $depcc],
- [am_cv_$1_dependencies_compiler_type],
-[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
- # We make a subdir and do the tests there. Otherwise we can end up
- # making bogus files that we don't know about and never remove. For
- # instance it was reported that on HP-UX the gcc test will end up
- # making a dummy file named `D' -- because `-MD' means `put the output
- # in D'.
- mkdir conftest.dir
- # Copy depcomp to subdir because otherwise we won't find it if we're
- # using a relative directory.
- cp "$am_depcomp" conftest.dir
- cd conftest.dir
- # We will build objects and dependencies in a subdirectory because
- # it helps to detect inapplicable dependency modes. For instance
- # both Tru64's cc and ICC support -MD to output dependencies as a
- # side effect of compilation, but ICC will put the dependencies in
- # the current directory while Tru64 will put them in the object
- # directory.
- mkdir sub
-
- am_cv_$1_dependencies_compiler_type=none
- if test "$am_compiler_list" = ""; then
- am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
- fi
- for depmode in $am_compiler_list; do
- # Setup a source with many dependencies, because some compilers
- # like to wrap large dependency lists on column 80 (with \), and
- # we should not choose a depcomp mode which is confused by this.
- #
- # We need to recreate these files for each test, as the compiler may
- # overwrite some of them when testing with obscure command lines.
- # This happens at least with the AIX C compiler.
- : > sub/conftest.c
- for i in 1 2 3 4 5 6; do
- echo '#include "conftst'$i'.h"' >> sub/conftest.c
- # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
- # Solaris 8's {/usr,}/bin/sh.
- touch sub/conftst$i.h
- done
- echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
-
- case $depmode in
- nosideeffect)
- # after this tag, mechanisms are not by side-effect, so they'll
- # only be used when explicitly requested
- if test "x$enable_dependency_tracking" = xyes; then
- continue
- else
- break
- fi
- ;;
- none) break ;;
- esac
- # We check with `-c' and `-o' for the sake of the "dashmstdout"
- # mode. It turns out that the SunPro C++ compiler does not properly
- # handle `-M -o', and we need to detect this.
- if depmode=$depmode \
- source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
- depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
- $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
- >/dev/null 2>conftest.err &&
- grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
- grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
- grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
- ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
- # icc doesn't choke on unknown options, it will just issue warnings
- # or remarks (even with -Werror). So we grep stderr for any message
- # that says an option was ignored or not supported.
- # When given -MP, icc 7.0 and 7.1 complain thusly:
- # icc: Command line warning: ignoring option '-M'; no argument required
- # The diagnosis changed in icc 8.0:
- # icc: Command line remark: option '-MP' not supported
- if (grep 'ignoring option' conftest.err ||
- grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
- am_cv_$1_dependencies_compiler_type=$depmode
- break
- fi
- fi
- done
-
- cd ..
- rm -rf conftest.dir
-else
- am_cv_$1_dependencies_compiler_type=none
-fi
-])
-AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
-AM_CONDITIONAL([am__fastdep$1], [
- test "x$enable_dependency_tracking" != xno \
- && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
-])
-
-
-# AM_SET_DEPDIR
-# -------------
-# Choose a directory name for dependency files.
-# This macro is AC_REQUIREd in _AM_DEPENDENCIES
-AC_DEFUN([AM_SET_DEPDIR],
-[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
-AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
-])
-
-
-# AM_DEP_TRACK
-# ------------
-AC_DEFUN([AM_DEP_TRACK],
-[AC_ARG_ENABLE(dependency-tracking,
-[ --disable-dependency-tracking speeds up one-time build
- --enable-dependency-tracking do not reject slow dependency extractors])
-if test "x$enable_dependency_tracking" != xno; then
- am_depcomp="$ac_aux_dir/depcomp"
- AMDEPBACKSLASH='\'
-fi
-AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
-AC_SUBST([AMDEPBACKSLASH])dnl
-_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
-])
-
-# Generate code to set up dependency tracking. -*- Autoconf -*-
-
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-#serial 3
-
-# _AM_OUTPUT_DEPENDENCY_COMMANDS
-# ------------------------------
-AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
-[for mf in $CONFIG_FILES; do
- # Strip MF so we end up with the name of the file.
- mf=`echo "$mf" | sed -e 's/:.*$//'`
- # Check whether this is an Automake generated Makefile or not.
- # We used to match only the files named `Makefile.in', but
- # some people rename them; so instead we look at the file content.
- # Grep'ing the first line is not enough: some people post-process
- # each Makefile.in and add a new line on top of each file to say so.
- # Grep'ing the whole file is not good either: AIX grep has a line
- # limit of 2048, but all sed's we know have understand at least 4000.
- if sed 10q "$mf" | grep '^#.*generated by automake' > /dev/null 2>&1; then
- dirpart=`AS_DIRNAME("$mf")`
- else
- continue
- fi
- # Extract the definition of DEPDIR, am__include, and am__quote
- # from the Makefile without running `make'.
- DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
- test -z "$DEPDIR" && continue
- am__include=`sed -n 's/^am__include = //p' < "$mf"`
- test -z "am__include" && continue
- am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
- # When using ansi2knr, U may be empty or an underscore; expand it
- U=`sed -n 's/^U = //p' < "$mf"`
- # Find all dependency output files, they are included files with
- # $(DEPDIR) in their names. We invoke sed twice because it is the
- # simplest approach to changing $(DEPDIR) to its actual value in the
- # expansion.
- for file in `sed -n "
- s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
- sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
- # Make sure the directory exists.
- test -f "$dirpart/$file" && continue
- fdir=`AS_DIRNAME(["$file"])`
- AS_MKDIR_P([$dirpart/$fdir])
- # echo "creating $dirpart/$file"
- echo '# dummy' > "$dirpart/$file"
- done
-done
-])# _AM_OUTPUT_DEPENDENCY_COMMANDS
-
-
-# AM_OUTPUT_DEPENDENCY_COMMANDS
-# -----------------------------
-# This macro should only be invoked once -- use via AC_REQUIRE.
-#
-# This code is only required when automatic dependency tracking
-# is enabled. FIXME. This creates each `.P' file that we will
-# need in order to bootstrap the dependency handling code.
-AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
-[AC_CONFIG_COMMANDS([depfiles],
- [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
- [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
-])
-
-# Do all the work for Automake. -*- Autoconf -*-
-
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005, 2006 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 12
-
-# This macro actually does too much. Some checks are only needed if
-# your package does certain things. But this isn't really a big deal.
-
-# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
-# AM_INIT_AUTOMAKE([OPTIONS])
-# -----------------------------------------------
-# The call with PACKAGE and VERSION arguments is the old style
-# call (pre autoconf-2.50), which is being phased out. PACKAGE
-# and VERSION should now be passed to AC_INIT and removed from
-# the call to AM_INIT_AUTOMAKE.
-# We support both call styles for the transition. After
-# the next Automake release, Autoconf can make the AC_INIT
-# arguments mandatory, and then we can depend on a new Autoconf
-# release and drop the old call support.
-AC_DEFUN([AM_INIT_AUTOMAKE],
-[AC_PREREQ([2.60])dnl
-dnl Autoconf wants to disallow AM_ names. We explicitly allow
-dnl the ones we care about.
-m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
-AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
-AC_REQUIRE([AC_PROG_INSTALL])dnl
-if test "`cd $srcdir && pwd`" != "`pwd`"; then
- # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
- # is not polluted with repeated "-I."
- AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
- # test to see if srcdir already configured
- if test -f $srcdir/config.status; then
- AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
- fi
-fi
-
-# test whether we have cygpath
-if test -z "$CYGPATH_W"; then
- if (cygpath --version) >/dev/null 2>/dev/null; then
- CYGPATH_W='cygpath -w'
- else
- CYGPATH_W=echo
- fi
-fi
-AC_SUBST([CYGPATH_W])
-
-# Define the identity of the package.
-dnl Distinguish between old-style and new-style calls.
-m4_ifval([$2],
-[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
- AC_SUBST([PACKAGE], [$1])dnl
- AC_SUBST([VERSION], [$2])],
-[_AM_SET_OPTIONS([$1])dnl
-dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
-m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,,
- [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
- AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
- AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
-
-_AM_IF_OPTION([no-define],,
-[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
- AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
-
-# Some tools Automake needs.
-AC_REQUIRE([AM_SANITY_CHECK])dnl
-AC_REQUIRE([AC_ARG_PROGRAM])dnl
-AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
-AM_MISSING_PROG(AUTOCONF, autoconf)
-AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
-AM_MISSING_PROG(AUTOHEADER, autoheader)
-AM_MISSING_PROG(MAKEINFO, makeinfo)
-AM_PROG_INSTALL_SH
-AM_PROG_INSTALL_STRIP
-AC_REQUIRE([AM_PROG_MKDIR_P])dnl
-# We need awk for the "check" target. The system "awk" is bad on
-# some platforms.
-AC_REQUIRE([AC_PROG_AWK])dnl
-AC_REQUIRE([AC_PROG_MAKE_SET])dnl
-AC_REQUIRE([AM_SET_LEADING_DOT])dnl
-_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
- [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
- [_AM_PROG_TAR([v7])])])
-_AM_IF_OPTION([no-dependencies],,
-[AC_PROVIDE_IFELSE([AC_PROG_CC],
- [_AM_DEPENDENCIES(CC)],
- [define([AC_PROG_CC],
- defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
-AC_PROVIDE_IFELSE([AC_PROG_CXX],
- [_AM_DEPENDENCIES(CXX)],
- [define([AC_PROG_CXX],
- defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
-AC_PROVIDE_IFELSE([AC_PROG_OBJC],
- [_AM_DEPENDENCIES(OBJC)],
- [define([AC_PROG_OBJC],
- defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
-])
-])
-
-
-# When config.status generates a header, we must update the stamp-h file.
-# This file resides in the same directory as the config header
-# that is generated. The stamp files are numbered to have different names.
-
-# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
-# loop where config.status creates the headers, so we can generate
-# our stamp files there.
-AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
-[# Compute $1's index in $config_headers.
-_am_stamp_count=1
-for _am_header in $config_headers :; do
- case $_am_header in
- $1 | $1:* )
- break ;;
- * )
- _am_stamp_count=`expr $_am_stamp_count + 1` ;;
- esac
-done
-echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count])
-
-# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_PROG_INSTALL_SH
-# ------------------
-# Define $install_sh.
-AC_DEFUN([AM_PROG_INSTALL_SH],
-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"}
-AC_SUBST(install_sh)])
-
-# Copyright (C) 2003, 2005 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 2
-
-# Check whether the underlying file-system supports filenames
-# with a leading dot. For instance MS-DOS doesn't.
-AC_DEFUN([AM_SET_LEADING_DOT],
-[rm -rf .tst 2>/dev/null
-mkdir .tst 2>/dev/null
-if test -d .tst; then
- am__leading_dot=.
-else
- am__leading_dot=_
-fi
-rmdir .tst 2>/dev/null
-AC_SUBST([am__leading_dot])])
-
-# Add --enable-maintainer-mode option to configure. -*- Autoconf -*-
-# From Jim Meyering
-
-# Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004, 2005
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 4
-
-AC_DEFUN([AM_MAINTAINER_MODE],
-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
- dnl maintainer-mode is disabled by default
- AC_ARG_ENABLE(maintainer-mode,
-[ --enable-maintainer-mode enable make rules and dependencies not useful
- (and sometimes confusing) to the casual installer],
- USE_MAINTAINER_MODE=$enableval,
- USE_MAINTAINER_MODE=no)
- AC_MSG_RESULT([$USE_MAINTAINER_MODE])
- AM_CONDITIONAL(MAINTAINER_MODE, [test $USE_MAINTAINER_MODE = yes])
- MAINT=$MAINTAINER_MODE_TRUE
- AC_SUBST(MAINT)dnl
-]
-)
-
-AU_DEFUN([jm_MAINTAINER_MODE], [AM_MAINTAINER_MODE])
-
-# Check to see how 'make' treats includes. -*- Autoconf -*-
-
-# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 3
-
-# AM_MAKE_INCLUDE()
-# -----------------
-# Check to see how make treats includes.
-AC_DEFUN([AM_MAKE_INCLUDE],
-[am_make=${MAKE-make}
-cat > confinc << 'END'
-am__doit:
- @echo done
-.PHONY: am__doit
-END
-# If we don't find an include directive, just comment out the code.
-AC_MSG_CHECKING([for style of include used by $am_make])
-am__include="#"
-am__quote=
-_am_result=none
-# First try GNU make style include.
-echo "include confinc" > confmf
-# We grep out `Entering directory' and `Leaving directory'
-# messages which can occur if `w' ends up in MAKEFLAGS.
-# In particular we don't look at `^make:' because GNU make might
-# be invoked under some other name (usually "gmake"), in which
-# case it prints its new name instead of `make'.
-if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
- am__include=include
- am__quote=
- _am_result=GNU
-fi
-# Now try BSD make style include.
-if test "$am__include" = "#"; then
- echo '.include "confinc"' > confmf
- if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
- am__include=.include
- am__quote="\""
- _am_result=BSD
- fi
-fi
-AC_SUBST([am__include])
-AC_SUBST([am__quote])
-AC_MSG_RESULT([$_am_result])
-rm -f confinc confmf
-])
-
-# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*-
-
-# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 5
-
-# AM_MISSING_PROG(NAME, PROGRAM)
-# ------------------------------
-AC_DEFUN([AM_MISSING_PROG],
-[AC_REQUIRE([AM_MISSING_HAS_RUN])
-$1=${$1-"${am_missing_run}$2"}
-AC_SUBST($1)])
-
-
-# AM_MISSING_HAS_RUN
-# ------------------
-# Define MISSING if not defined so far and test if it supports --run.
-# If it does, set am_missing_run to use it, otherwise, to nothing.
-AC_DEFUN([AM_MISSING_HAS_RUN],
-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-AC_REQUIRE_AUX_FILE([missing])dnl
-test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
-# Use eval to expand $SHELL
-if eval "$MISSING --run true"; then
- am_missing_run="$MISSING --run "
-else
- am_missing_run=
- AC_MSG_WARN([`missing' script is too old or missing])
-fi
-])
-
-# Copyright (C) 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_PROG_MKDIR_P
-# ---------------
-# Check for `mkdir -p'.
-AC_DEFUN([AM_PROG_MKDIR_P],
-[AC_PREREQ([2.60])dnl
-AC_REQUIRE([AC_PROG_MKDIR_P])dnl
-dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P,
-dnl while keeping a definition of mkdir_p for backward compatibility.
-dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile.
-dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of
-dnl Makefile.ins that do not define MKDIR_P, so we do our own
-dnl adjustment using top_builddir (which is defined more often than
-dnl MKDIR_P).
-AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl
-case $mkdir_p in
- [[\\/$]]* | ?:[[\\/]]*) ;;
- */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
-esac
-])
-
-# Helper functions for option handling. -*- Autoconf -*-
-
-# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 3
-
-# _AM_MANGLE_OPTION(NAME)
-# -----------------------
-AC_DEFUN([_AM_MANGLE_OPTION],
-[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
-
-# _AM_SET_OPTION(NAME)
-# ------------------------------
-# Set option NAME. Presently that only means defining a flag for this option.
-AC_DEFUN([_AM_SET_OPTION],
-[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
-
-# _AM_SET_OPTIONS(OPTIONS)
-# ----------------------------------
-# OPTIONS is a space-separated list of Automake options.
-AC_DEFUN([_AM_SET_OPTIONS],
-[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
-
-# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
-# -------------------------------------------
-# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
-AC_DEFUN([_AM_IF_OPTION],
-[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
-
-# Check to make sure that the build environment is sane. -*- Autoconf -*-
-
-# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 4
-
-# AM_SANITY_CHECK
-# ---------------
-AC_DEFUN([AM_SANITY_CHECK],
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftest.file
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments. Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
- set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
- if test "$[*]" = "X"; then
- # -L didn't work.
- set X `ls -t $srcdir/configure conftest.file`
- fi
- rm -f conftest.file
- if test "$[*]" != "X $srcdir/configure conftest.file" \
- && test "$[*]" != "X conftest.file $srcdir/configure"; then
-
- # If neither matched, then we have a broken ls. This can happen
- # if, for instance, CONFIG_SHELL is bash and it inherits a
- # broken ls alias from the environment. This has actually
- # happened. Such a system could not be considered "sane".
- AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
-alias in your environment])
- fi
-
- test "$[2]" = conftest.file
- )
-then
- # Ok.
- :
-else
- AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-AC_MSG_RESULT(yes)])
-
-# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_PROG_INSTALL_STRIP
-# ---------------------
-# One issue with vendor `install' (even GNU) is that you can't
-# specify the program used to strip binaries. This is especially
-# annoying in cross-compiling environments, where the build's strip
-# is unlikely to handle the host's binaries.
-# Fortunately install-sh will honor a STRIPPROG variable, so we
-# always use install-sh in `make install-strip', and initialize
-# STRIPPROG with the value of the STRIP variable (set by the user).
-AC_DEFUN([AM_PROG_INSTALL_STRIP],
-[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
-# Installed binaries are usually stripped using `strip' when the user
-# run `make install-strip'. However `strip' might not be the right
-# tool to use in cross-compilation environments, therefore Automake
-# will honor the `STRIP' environment variable to overrule this program.
-dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
-if test "$cross_compiling" != no; then
- AC_CHECK_TOOL([STRIP], [strip], :)
-fi
-INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
-AC_SUBST([INSTALL_STRIP_PROGRAM])])
-
-# Copyright (C) 2006 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# _AM_SUBST_NOTMAKE(VARIABLE)
-# ---------------------------
-# Prevent Automake from outputing VARIABLE = @VARIABLE@ in Makefile.in.
-# This macro is traced by Automake.
-AC_DEFUN([_AM_SUBST_NOTMAKE])
-
-# Check how to create a tarball. -*- Autoconf -*-
-
-# Copyright (C) 2004, 2005 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 2
-
-# _AM_PROG_TAR(FORMAT)
-# --------------------
-# Check how to create a tarball in format FORMAT.
-# FORMAT should be one of `v7', `ustar', or `pax'.
-#
-# Substitute a variable $(am__tar) that is a command
-# writing to stdout a FORMAT-tarball containing the directory
-# $tardir.
-# tardir=directory && $(am__tar) > result.tar
-#
-# Substitute a variable $(am__untar) that extract such
-# a tarball read from stdin.
-# $(am__untar) < result.tar
-AC_DEFUN([_AM_PROG_TAR],
-[# Always define AMTAR for backward compatibility.
-AM_MISSING_PROG([AMTAR], [tar])
-m4_if([$1], [v7],
- [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],
- [m4_case([$1], [ustar],, [pax],,
- [m4_fatal([Unknown tar format])])
-AC_MSG_CHECKING([how to create a $1 tar archive])
-# Loop over all known methods to create a tar archive until one works.
-_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
-_am_tools=${am_cv_prog_tar_$1-$_am_tools}
-# Do not fold the above two line into one, because Tru64 sh and
-# Solaris sh will not grok spaces in the rhs of `-'.
-for _am_tool in $_am_tools
-do
- case $_am_tool in
- gnutar)
- for _am_tar in tar gnutar gtar;
- do
- AM_RUN_LOG([$_am_tar --version]) && break
- done
- am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
- am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
- am__untar="$_am_tar -xf -"
- ;;
- plaintar)
- # Must skip GNU tar: if it does not support --format= it doesn't create
- # ustar tarball either.
- (tar --version) >/dev/null 2>&1 && continue
- am__tar='tar chf - "$$tardir"'
- am__tar_='tar chf - "$tardir"'
- am__untar='tar xf -'
- ;;
- pax)
- am__tar='pax -L -x $1 -w "$$tardir"'
- am__tar_='pax -L -x $1 -w "$tardir"'
- am__untar='pax -r'
- ;;
- cpio)
- am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
- am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
- am__untar='cpio -i -H $1 -d'
- ;;
- none)
- am__tar=false
- am__tar_=false
- am__untar=false
- ;;
- esac
-
- # If the value was cached, stop now. We just wanted to have am__tar
- # and am__untar set.
- test -n "${am_cv_prog_tar_$1}" && break
-
- # tar/untar a dummy directory, and stop if the command works
- rm -rf conftest.dir
- mkdir conftest.dir
- echo GrepMe > conftest.dir/file
- AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
- rm -rf conftest.dir
- if test -s conftest.tar; then
- AM_RUN_LOG([$am__untar <conftest.tar])
- grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
- fi
-done
-rm -rf conftest.dir
-
-AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
-AC_MSG_RESULT([$am_cv_prog_tar_$1])])
-AC_SUBST([am__tar])
-AC_SUBST([am__untar])
-]) # _AM_PROG_TAR
-
Copied: vendor/openbsm/1.2_alpha4/aclocal.m4 (from rev 11163, vendor/openbsm/dist/aclocal.m4)
===================================================================
--- vendor/openbsm/1.2_alpha4/aclocal.m4 (rev 0)
+++ vendor/openbsm/1.2_alpha4/aclocal.m4 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,9600 @@
+# generated automatically by aclocal 1.12.2 -*- Autoconf -*-
+
+# Copyright (C) 1996-2012 Free Software Foundation, Inc.
+
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+m4_ifndef([AC_AUTOCONF_VERSION],
+ [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],,
+[m4_warning([this file was generated for autoconf 2.69.
+You have another version of autoconf. It may work, but is not guaranteed to.
+If you have problems, you may need to regenerate the build system entirely.
+To do so, use the procedure documented by the package, typically 'autoreconf'.])])
+
+# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
+#
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+# 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+# Foundation, Inc.
+# Written by Gordon Matzigkeit, 1996
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+m4_define([_LT_COPYING], [dnl
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+# 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+# Foundation, Inc.
+# Written by Gordon Matzigkeit, 1996
+#
+# This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# As a special exception to the GNU General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU Libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING. If not, a copy
+# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
+# obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+])
+
+# serial 57 LT_INIT
+
+
+# LT_PREREQ(VERSION)
+# ------------------
+# Complain and exit if this libtool version is less that VERSION.
+m4_defun([LT_PREREQ],
+[m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1,
+ [m4_default([$3],
+ [m4_fatal([Libtool version $1 or higher is required],
+ 63)])],
+ [$2])])
+
+
+# _LT_CHECK_BUILDDIR
+# ------------------
+# Complain if the absolute build directory name contains unusual characters
+m4_defun([_LT_CHECK_BUILDDIR],
+[case `pwd` in
+ *\ * | *\ *)
+ AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;;
+esac
+])
+
+
+# LT_INIT([OPTIONS])
+# ------------------
+AC_DEFUN([LT_INIT],
+[AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT
+AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
+AC_BEFORE([$0], [LT_LANG])dnl
+AC_BEFORE([$0], [LT_OUTPUT])dnl
+AC_BEFORE([$0], [LTDL_INIT])dnl
+m4_require([_LT_CHECK_BUILDDIR])dnl
+
+dnl Autoconf doesn't catch unexpanded LT_ macros by default:
+m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl
+m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl
+dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4
+dnl unless we require an AC_DEFUNed macro:
+AC_REQUIRE([LTOPTIONS_VERSION])dnl
+AC_REQUIRE([LTSUGAR_VERSION])dnl
+AC_REQUIRE([LTVERSION_VERSION])dnl
+AC_REQUIRE([LTOBSOLETE_VERSION])dnl
+m4_require([_LT_PROG_LTMAIN])dnl
+
+_LT_SHELL_INIT([SHELL=${CONFIG_SHELL-/bin/sh}])
+
+dnl Parse OPTIONS
+_LT_SET_OPTIONS([$0], [$1])
+
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS="$ltmain"
+
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+AC_SUBST(LIBTOOL)dnl
+
+_LT_SETUP
+
+# Only expand once:
+m4_define([LT_INIT])
+])# LT_INIT
+
+# Old names:
+AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT])
+AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_PROG_LIBTOOL], [])
+dnl AC_DEFUN([AM_PROG_LIBTOOL], [])
+
+
+# _LT_CC_BASENAME(CC)
+# -------------------
+# Calculate cc_basename. Skip known compiler wrappers and cross-prefix.
+m4_defun([_LT_CC_BASENAME],
+[for cc_temp in $1""; do
+ case $cc_temp in
+ compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
+ distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
+ \-*) ;;
+ *) break;;
+ esac
+done
+cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+])
+
+
+# _LT_FILEUTILS_DEFAULTS
+# ----------------------
+# It is okay to use these file commands and assume they have been set
+# sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'.
+m4_defun([_LT_FILEUTILS_DEFAULTS],
+[: ${CP="cp -f"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+])# _LT_FILEUTILS_DEFAULTS
+
+
+# _LT_SETUP
+# ---------
+m4_defun([_LT_SETUP],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+AC_REQUIRE([_LT_PREPARE_SED_QUOTE_VARS])dnl
+AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl
+
+_LT_DECL([], [PATH_SEPARATOR], [1], [The PATH separator for the build system])dnl
+dnl
+_LT_DECL([], [host_alias], [0], [The host system])dnl
+_LT_DECL([], [host], [0])dnl
+_LT_DECL([], [host_os], [0])dnl
+dnl
+_LT_DECL([], [build_alias], [0], [The build system])dnl
+_LT_DECL([], [build], [0])dnl
+_LT_DECL([], [build_os], [0])dnl
+dnl
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([LT_PATH_LD])dnl
+AC_REQUIRE([LT_PATH_NM])dnl
+dnl
+AC_REQUIRE([AC_PROG_LN_S])dnl
+test -z "$LN_S" && LN_S="ln -s"
+_LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl
+dnl
+AC_REQUIRE([LT_CMD_MAX_LEN])dnl
+_LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl
+_LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl
+dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_CHECK_SHELL_FEATURES])dnl
+m4_require([_LT_PATH_CONVERSION_FUNCTIONS])dnl
+m4_require([_LT_CMD_RELOAD])dnl
+m4_require([_LT_CHECK_MAGIC_METHOD])dnl
+m4_require([_LT_CHECK_SHAREDLIB_FROM_LINKLIB])dnl
+m4_require([_LT_CMD_OLD_ARCHIVE])dnl
+m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
+m4_require([_LT_WITH_SYSROOT])dnl
+
+_LT_CONFIG_LIBTOOL_INIT([
+# See if we are running on zsh, and set the options which allow our
+# commands through without removal of \ escapes INIT.
+if test -n "\${ZSH_VERSION+set}" ; then
+ setopt NO_GLOB_SUBST
+fi
+])
+if test -n "${ZSH_VERSION+set}" ; then
+ setopt NO_GLOB_SUBST
+fi
+
+_LT_CHECK_OBJDIR
+
+m4_require([_LT_TAG_COMPILER])dnl
+
+case $host_os in
+aix3*)
+ # AIX sometimes has problems with the GCC collect2 program. For some
+ # reason, if we set the COLLECT_NAMES environment variable, the problems
+ # vanish in a puff of smoke.
+ if test "X${COLLECT_NAMES+set}" != Xset; then
+ COLLECT_NAMES=
+ export COLLECT_NAMES
+ fi
+ ;;
+esac
+
+# Global variables:
+ofile=libtool
+can_build_shared=yes
+
+# All known linkers require a `.a' archive for static linking (except MSVC,
+# which needs '.lib').
+libext=a
+
+with_gnu_ld="$lt_cv_prog_gnu_ld"
+
+old_CC="$CC"
+old_CFLAGS="$CFLAGS"
+
+# Set sane defaults for various variables
+test -z "$CC" && CC=cc
+test -z "$LTCC" && LTCC=$CC
+test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
+test -z "$LD" && LD=ld
+test -z "$ac_objext" && ac_objext=o
+
+_LT_CC_BASENAME([$compiler])
+
+# Only perform the check for file, if the check method requires it
+test -z "$MAGIC_CMD" && MAGIC_CMD=file
+case $deplibs_check_method in
+file_magic*)
+ if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+ _LT_PATH_MAGIC
+ fi
+ ;;
+esac
+
+# Use C for the default configuration in the libtool script
+LT_SUPPORTED_TAG([CC])
+_LT_LANG_C_CONFIG
+_LT_LANG_DEFAULT_CONFIG
+_LT_CONFIG_COMMANDS
+])# _LT_SETUP
+
+
+# _LT_PREPARE_SED_QUOTE_VARS
+# --------------------------
+# Define a few sed substitution that help us do robust quoting.
+m4_defun([_LT_PREPARE_SED_QUOTE_VARS],
+[# Backslashify metacharacters that are still active within
+# double-quoted strings.
+sed_quote_subst='s/\([["`$\\]]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\([["`\\]]\)/\\\1/g'
+
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+# Sed substitution to delay expansion of an escaped single quote.
+delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
+
+# Sed substitution to avoid accidental globbing in evaled expressions
+no_glob_subst='s/\*/\\\*/g'
+])
+
+# _LT_PROG_LTMAIN
+# ---------------
+# Note that this code is called both from `configure', and `config.status'
+# now that we use AC_CONFIG_COMMANDS to generate libtool. Notably,
+# `config.status' has no value for ac_aux_dir unless we are using Automake,
+# so we pass a copy along to make sure it has a sensible value anyway.
+m4_defun([_LT_PROG_LTMAIN],
+[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl
+_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir'])
+ltmain="$ac_aux_dir/ltmain.sh"
+])# _LT_PROG_LTMAIN
+
+
+
+# So that we can recreate a full libtool script including additional
+# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS
+# in macros and then make a single call at the end using the `libtool'
+# label.
+
+
+# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS])
+# ----------------------------------------
+# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later.
+m4_define([_LT_CONFIG_LIBTOOL_INIT],
+[m4_ifval([$1],
+ [m4_append([_LT_OUTPUT_LIBTOOL_INIT],
+ [$1
+])])])
+
+# Initialize.
+m4_define([_LT_OUTPUT_LIBTOOL_INIT])
+
+
+# _LT_CONFIG_LIBTOOL([COMMANDS])
+# ------------------------------
+# Register COMMANDS to be passed to AC_CONFIG_COMMANDS later.
+m4_define([_LT_CONFIG_LIBTOOL],
+[m4_ifval([$1],
+ [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS],
+ [$1
+])])])
+
+# Initialize.
+m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS])
+
+
+# _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS])
+# -----------------------------------------------------
+m4_defun([_LT_CONFIG_SAVE_COMMANDS],
+[_LT_CONFIG_LIBTOOL([$1])
+_LT_CONFIG_LIBTOOL_INIT([$2])
+])
+
+
+# _LT_FORMAT_COMMENT([COMMENT])
+# -----------------------------
+# Add leading comment marks to the start of each line, and a trailing
+# full-stop to the whole comment if one is not present already.
+m4_define([_LT_FORMAT_COMMENT],
+[m4_ifval([$1], [
+m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])],
+ [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.])
+)])
+
+
+
+
+
+# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?])
+# -------------------------------------------------------------------
+# CONFIGNAME is the name given to the value in the libtool script.
+# VARNAME is the (base) name used in the configure script.
+# VALUE may be 0, 1 or 2 for a computed quote escaped value based on
+# VARNAME. Any other value will be used directly.
+m4_define([_LT_DECL],
+[lt_if_append_uniq([lt_decl_varnames], [$2], [, ],
+ [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name],
+ [m4_ifval([$1], [$1], [$2])])
+ lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3])
+ m4_ifval([$4],
+ [lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])])
+ lt_dict_add_subkey([lt_decl_dict], [$2],
+ [tagged?], [m4_ifval([$5], [yes], [no])])])
+])
+
+
+# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION])
+# --------------------------------------------------------
+m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])])
+
+
+# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...])
+# ------------------------------------------------
+m4_define([lt_decl_tag_varnames],
+[_lt_decl_filter([tagged?], [yes], $@)])
+
+
+# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..])
+# ---------------------------------------------------------
+m4_define([_lt_decl_filter],
+[m4_case([$#],
+ [0], [m4_fatal([$0: too few arguments: $#])],
+ [1], [m4_fatal([$0: too few arguments: $#: $1])],
+ [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)],
+ [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)],
+ [lt_dict_filter([lt_decl_dict], $@)])[]dnl
+])
+
+
+# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...])
+# --------------------------------------------------
+m4_define([lt_decl_quote_varnames],
+[_lt_decl_filter([value], [1], $@)])
+
+
+# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...])
+# ---------------------------------------------------
+m4_define([lt_decl_dquote_varnames],
+[_lt_decl_filter([value], [2], $@)])
+
+
+# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...])
+# ---------------------------------------------------
+m4_define([lt_decl_varnames_tagged],
+[m4_assert([$# <= 2])dnl
+_$0(m4_quote(m4_default([$1], [[, ]])),
+ m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]),
+ m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))])
+m4_define([_lt_decl_varnames_tagged],
+[m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])])
+
+
+# lt_decl_all_varnames([SEPARATOR], [VARNAME1...])
+# ------------------------------------------------
+m4_define([lt_decl_all_varnames],
+[_$0(m4_quote(m4_default([$1], [[, ]])),
+ m4_if([$2], [],
+ m4_quote(lt_decl_varnames),
+ m4_quote(m4_shift($@))))[]dnl
+])
+m4_define([_lt_decl_all_varnames],
+[lt_join($@, lt_decl_varnames_tagged([$1],
+ lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl
+])
+
+
+# _LT_CONFIG_STATUS_DECLARE([VARNAME])
+# ------------------------------------
+# Quote a variable value, and forward it to `config.status' so that its
+# declaration there will have the same value as in `configure'. VARNAME
+# must have a single quote delimited value for this to work.
+m4_define([_LT_CONFIG_STATUS_DECLARE],
+[$1='`$ECHO "$][$1" | $SED "$delay_single_quote_subst"`'])
+
+
+# _LT_CONFIG_STATUS_DECLARATIONS
+# ------------------------------
+# We delimit libtool config variables with single quotes, so when
+# we write them to config.status, we have to be sure to quote all
+# embedded single quotes properly. In configure, this macro expands
+# each variable declared with _LT_DECL (and _LT_TAGDECL) into:
+#
+# <var>='`$ECHO "$<var>" | $SED "$delay_single_quote_subst"`'
+m4_defun([_LT_CONFIG_STATUS_DECLARATIONS],
+[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames),
+ [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])])
+
+
+# _LT_LIBTOOL_TAGS
+# ----------------
+# Output comment and list of tags supported by the script
+m4_defun([_LT_LIBTOOL_TAGS],
+[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl
+available_tags="_LT_TAGS"dnl
+])
+
+
+# _LT_LIBTOOL_DECLARE(VARNAME, [TAG])
+# -----------------------------------
+# Extract the dictionary values for VARNAME (optionally with TAG) and
+# expand to a commented shell variable setting:
+#
+# # Some comment about what VAR is for.
+# visible_name=$lt_internal_name
+m4_define([_LT_LIBTOOL_DECLARE],
+[_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1],
+ [description])))[]dnl
+m4_pushdef([_libtool_name],
+ m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl
+m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])),
+ [0], [_libtool_name=[$]$1],
+ [1], [_libtool_name=$lt_[]$1],
+ [2], [_libtool_name=$lt_[]$1],
+ [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl
+m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl
+])
+
+
+# _LT_LIBTOOL_CONFIG_VARS
+# -----------------------
+# Produce commented declarations of non-tagged libtool config variables
+# suitable for insertion in the LIBTOOL CONFIG section of the `libtool'
+# script. Tagged libtool config variables (even for the LIBTOOL CONFIG
+# section) are produced by _LT_LIBTOOL_TAG_VARS.
+m4_defun([_LT_LIBTOOL_CONFIG_VARS],
+[m4_foreach([_lt_var],
+ m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)),
+ [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])])
+
+
+# _LT_LIBTOOL_TAG_VARS(TAG)
+# -------------------------
+m4_define([_LT_LIBTOOL_TAG_VARS],
+[m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames),
+ [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])])
+
+
+# _LT_TAGVAR(VARNAME, [TAGNAME])
+# ------------------------------
+m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])])
+
+
+# _LT_CONFIG_COMMANDS
+# -------------------
+# Send accumulated output to $CONFIG_STATUS. Thanks to the lists of
+# variables for single and double quote escaping we saved from calls
+# to _LT_DECL, we can put quote escaped variables declarations
+# into `config.status', and then the shell code to quote escape them in
+# for loops in `config.status'. Finally, any additional code accumulated
+# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded.
+m4_defun([_LT_CONFIG_COMMANDS],
+[AC_PROVIDE_IFELSE([LT_OUTPUT],
+ dnl If the libtool generation code has been placed in $CONFIG_LT,
+ dnl instead of duplicating it all over again into config.status,
+ dnl then we will have config.status run $CONFIG_LT later, so it
+ dnl needs to know what name is stored there:
+ [AC_CONFIG_COMMANDS([libtool],
+ [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])],
+ dnl If the libtool generation code is destined for config.status,
+ dnl expand the accumulated commands and init code now:
+ [AC_CONFIG_COMMANDS([libtool],
+ [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])])
+])#_LT_CONFIG_COMMANDS
+
+
+# Initialize.
+m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT],
+[
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+sed_quote_subst='$sed_quote_subst'
+double_quote_subst='$double_quote_subst'
+delay_variable_subst='$delay_variable_subst'
+_LT_CONFIG_STATUS_DECLARATIONS
+LTCC='$LTCC'
+LTCFLAGS='$LTCFLAGS'
+compiler='$compiler_DEFAULT'
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+ eval 'cat <<_LTECHO_EOF
+\$[]1
+_LTECHO_EOF'
+}
+
+# Quote evaled strings.
+for var in lt_decl_all_varnames([[ \
+]], lt_decl_quote_varnames); do
+ case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+ *[[\\\\\\\`\\"\\\$]]*)
+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+ ;;
+ *)
+ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+ ;;
+ esac
+done
+
+# Double-quote double-evaled strings.
+for var in lt_decl_all_varnames([[ \
+]], lt_decl_dquote_varnames); do
+ case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+ *[[\\\\\\\`\\"\\\$]]*)
+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+ ;;
+ *)
+ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+ ;;
+ esac
+done
+
+_LT_OUTPUT_LIBTOOL_INIT
+])
+
+# _LT_GENERATED_FILE_INIT(FILE, [COMMENT])
+# ------------------------------------
+# Generate a child script FILE with all initialization necessary to
+# reuse the environment learned by the parent script, and make the
+# file executable. If COMMENT is supplied, it is inserted after the
+# `#!' sequence but before initialization text begins. After this
+# macro, additional text can be appended to FILE to form the body of
+# the child script. The macro ends with non-zero status if the
+# file could not be fully written (such as if the disk is full).
+m4_ifdef([AS_INIT_GENERATED],
+[m4_defun([_LT_GENERATED_FILE_INIT],[AS_INIT_GENERATED($@)])],
+[m4_defun([_LT_GENERATED_FILE_INIT],
+[m4_require([AS_PREPARE])]dnl
+[m4_pushdef([AS_MESSAGE_LOG_FD])]dnl
+[lt_write_fail=0
+cat >$1 <<_ASEOF || lt_write_fail=1
+#! $SHELL
+# Generated by $as_me.
+$2
+SHELL=\${CONFIG_SHELL-$SHELL}
+export SHELL
+_ASEOF
+cat >>$1 <<\_ASEOF || lt_write_fail=1
+AS_SHELL_SANITIZE
+_AS_PREPARE
+exec AS_MESSAGE_FD>&1
+_ASEOF
+test $lt_write_fail = 0 && chmod +x $1[]dnl
+m4_popdef([AS_MESSAGE_LOG_FD])])])# _LT_GENERATED_FILE_INIT
+
+# LT_OUTPUT
+# ---------
+# This macro allows early generation of the libtool script (before
+# AC_OUTPUT is called), incase it is used in configure for compilation
+# tests.
+AC_DEFUN([LT_OUTPUT],
+[: ${CONFIG_LT=./config.lt}
+AC_MSG_NOTICE([creating $CONFIG_LT])
+_LT_GENERATED_FILE_INIT(["$CONFIG_LT"],
+[# Run this file to recreate a libtool stub with the current configuration.])
+
+cat >>"$CONFIG_LT" <<\_LTEOF
+lt_cl_silent=false
+exec AS_MESSAGE_LOG_FD>>config.log
+{
+ echo
+ AS_BOX([Running $as_me.])
+} >&AS_MESSAGE_LOG_FD
+
+lt_cl_help="\
+\`$as_me' creates a local libtool stub from the current configuration,
+for use in further configure time tests before the real libtool is
+generated.
+
+Usage: $[0] [[OPTIONS]]
+
+ -h, --help print this help, then exit
+ -V, --version print version number, then exit
+ -q, --quiet do not print progress messages
+ -d, --debug don't remove temporary files
+
+Report bugs to <bug-libtool at gnu.org>."
+
+lt_cl_version="\
+m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl
+m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION])
+configured by $[0], generated by m4_PACKAGE_STRING.
+
+Copyright (C) 2011 Free Software Foundation, Inc.
+This config.lt script is free software; the Free Software Foundation
+gives unlimited permision to copy, distribute and modify it."
+
+while test $[#] != 0
+do
+ case $[1] in
+ --version | --v* | -V )
+ echo "$lt_cl_version"; exit 0 ;;
+ --help | --h* | -h )
+ echo "$lt_cl_help"; exit 0 ;;
+ --debug | --d* | -d )
+ debug=: ;;
+ --quiet | --q* | --silent | --s* | -q )
+ lt_cl_silent=: ;;
+
+ -*) AC_MSG_ERROR([unrecognized option: $[1]
+Try \`$[0] --help' for more information.]) ;;
+
+ *) AC_MSG_ERROR([unrecognized argument: $[1]
+Try \`$[0] --help' for more information.]) ;;
+ esac
+ shift
+done
+
+if $lt_cl_silent; then
+ exec AS_MESSAGE_FD>/dev/null
+fi
+_LTEOF
+
+cat >>"$CONFIG_LT" <<_LTEOF
+_LT_OUTPUT_LIBTOOL_COMMANDS_INIT
+_LTEOF
+
+cat >>"$CONFIG_LT" <<\_LTEOF
+AC_MSG_NOTICE([creating $ofile])
+_LT_OUTPUT_LIBTOOL_COMMANDS
+AS_EXIT(0)
+_LTEOF
+chmod +x "$CONFIG_LT"
+
+# configure is writing to config.log, but config.lt does its own redirection,
+# appending to config.log, which fails on DOS, as config.log is still kept
+# open by configure. Here we exec the FD to /dev/null, effectively closing
+# config.log, so it can be properly (re)opened and appended to by config.lt.
+lt_cl_success=:
+test "$silent" = yes &&
+ lt_config_lt_args="$lt_config_lt_args --quiet"
+exec AS_MESSAGE_LOG_FD>/dev/null
+$SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
+exec AS_MESSAGE_LOG_FD>>config.log
+$lt_cl_success || AS_EXIT(1)
+])# LT_OUTPUT
+
+
+# _LT_CONFIG(TAG)
+# ---------------
+# If TAG is the built-in tag, create an initial libtool script with a
+# default configuration from the untagged config vars. Otherwise add code
+# to config.status for appending the configuration named by TAG from the
+# matching tagged config vars.
+m4_defun([_LT_CONFIG],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+_LT_CONFIG_SAVE_COMMANDS([
+ m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl
+ m4_if(_LT_TAG, [C], [
+ # See if we are running on zsh, and set the options which allow our
+ # commands through without removal of \ escapes.
+ if test -n "${ZSH_VERSION+set}" ; then
+ setopt NO_GLOB_SUBST
+ fi
+
+ cfgfile="${ofile}T"
+ trap "$RM \"$cfgfile\"; exit 1" 1 2 15
+ $RM "$cfgfile"
+
+ cat <<_LT_EOF >> "$cfgfile"
+#! $SHELL
+
+# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
+# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+#
+_LT_COPYING
+_LT_LIBTOOL_TAGS
+
+# ### BEGIN LIBTOOL CONFIG
+_LT_LIBTOOL_CONFIG_VARS
+_LT_LIBTOOL_TAG_VARS
+# ### END LIBTOOL CONFIG
+
+_LT_EOF
+
+ case $host_os in
+ aix3*)
+ cat <<\_LT_EOF >> "$cfgfile"
+# AIX sometimes has problems with the GCC collect2 program. For some
+# reason, if we set the COLLECT_NAMES environment variable, the problems
+# vanish in a puff of smoke.
+if test "X${COLLECT_NAMES+set}" != Xset; then
+ COLLECT_NAMES=
+ export COLLECT_NAMES
+fi
+_LT_EOF
+ ;;
+ esac
+
+ _LT_PROG_LTMAIN
+
+ # We use sed instead of cat because bash on DJGPP gets confused if
+ # if finds mixed CR/LF and LF-only lines. Since sed operates in
+ # text mode, it properly converts lines to CR/LF. This bash problem
+ # is reportedly fixed, but why not run on old versions too?
+ sed '$q' "$ltmain" >> "$cfgfile" \
+ || (rm -f "$cfgfile"; exit 1)
+
+ _LT_PROG_REPLACE_SHELLFNS
+
+ mv -f "$cfgfile" "$ofile" ||
+ (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
+ chmod +x "$ofile"
+],
+[cat <<_LT_EOF >> "$ofile"
+
+dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded
+dnl in a comment (ie after a #).
+# ### BEGIN LIBTOOL TAG CONFIG: $1
+_LT_LIBTOOL_TAG_VARS(_LT_TAG)
+# ### END LIBTOOL TAG CONFIG: $1
+_LT_EOF
+])dnl /m4_if
+],
+[m4_if([$1], [], [
+ PACKAGE='$PACKAGE'
+ VERSION='$VERSION'
+ TIMESTAMP='$TIMESTAMP'
+ RM='$RM'
+ ofile='$ofile'], [])
+])dnl /_LT_CONFIG_SAVE_COMMANDS
+])# _LT_CONFIG
+
+
+# LT_SUPPORTED_TAG(TAG)
+# ---------------------
+# Trace this macro to discover what tags are supported by the libtool
+# --tag option, using:
+# autoconf --trace 'LT_SUPPORTED_TAG:$1'
+AC_DEFUN([LT_SUPPORTED_TAG], [])
+
+
+# C support is built-in for now
+m4_define([_LT_LANG_C_enabled], [])
+m4_define([_LT_TAGS], [])
+
+
+# LT_LANG(LANG)
+# -------------
+# Enable libtool support for the given language if not already enabled.
+AC_DEFUN([LT_LANG],
+[AC_BEFORE([$0], [LT_OUTPUT])dnl
+m4_case([$1],
+ [C], [_LT_LANG(C)],
+ [C++], [_LT_LANG(CXX)],
+ [Go], [_LT_LANG(GO)],
+ [Java], [_LT_LANG(GCJ)],
+ [Fortran 77], [_LT_LANG(F77)],
+ [Fortran], [_LT_LANG(FC)],
+ [Windows Resource], [_LT_LANG(RC)],
+ [m4_ifdef([_LT_LANG_]$1[_CONFIG],
+ [_LT_LANG($1)],
+ [m4_fatal([$0: unsupported language: "$1"])])])dnl
+])# LT_LANG
+
+
+# _LT_LANG(LANGNAME)
+# ------------------
+m4_defun([_LT_LANG],
+[m4_ifdef([_LT_LANG_]$1[_enabled], [],
+ [LT_SUPPORTED_TAG([$1])dnl
+ m4_append([_LT_TAGS], [$1 ])dnl
+ m4_define([_LT_LANG_]$1[_enabled], [])dnl
+ _LT_LANG_$1_CONFIG($1)])dnl
+])# _LT_LANG
+
+
+m4_ifndef([AC_PROG_GO], [
+# NOTE: This macro has been submitted for inclusion into #
+# GNU Autoconf as AC_PROG_GO. When it is available in #
+# a released version of Autoconf we should remove this #
+# macro and use it instead. #
+m4_defun([AC_PROG_GO],
+[AC_LANG_PUSH(Go)dnl
+AC_ARG_VAR([GOC], [Go compiler command])dnl
+AC_ARG_VAR([GOFLAGS], [Go compiler flags])dnl
+_AC_ARG_VAR_LDFLAGS()dnl
+AC_CHECK_TOOL(GOC, gccgo)
+if test -z "$GOC"; then
+ if test -n "$ac_tool_prefix"; then
+ AC_CHECK_PROG(GOC, [${ac_tool_prefix}gccgo], [${ac_tool_prefix}gccgo])
+ fi
+fi
+if test -z "$GOC"; then
+ AC_CHECK_PROG(GOC, gccgo, gccgo, false)
+fi
+])#m4_defun
+])#m4_ifndef
+
+
+# _LT_LANG_DEFAULT_CONFIG
+# -----------------------
+m4_defun([_LT_LANG_DEFAULT_CONFIG],
+[AC_PROVIDE_IFELSE([AC_PROG_CXX],
+ [LT_LANG(CXX)],
+ [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])])
+
+AC_PROVIDE_IFELSE([AC_PROG_F77],
+ [LT_LANG(F77)],
+ [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])])
+
+AC_PROVIDE_IFELSE([AC_PROG_FC],
+ [LT_LANG(FC)],
+ [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])])
+
+dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal
+dnl pulling things in needlessly.
+AC_PROVIDE_IFELSE([AC_PROG_GCJ],
+ [LT_LANG(GCJ)],
+ [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
+ [LT_LANG(GCJ)],
+ [AC_PROVIDE_IFELSE([LT_PROG_GCJ],
+ [LT_LANG(GCJ)],
+ [m4_ifdef([AC_PROG_GCJ],
+ [m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])])
+ m4_ifdef([A][M_PROG_GCJ],
+ [m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])])
+ m4_ifdef([LT_PROG_GCJ],
+ [m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])])
+
+AC_PROVIDE_IFELSE([AC_PROG_GO],
+ [LT_LANG(GO)],
+ [m4_define([AC_PROG_GO], defn([AC_PROG_GO])[LT_LANG(GO)])])
+
+AC_PROVIDE_IFELSE([LT_PROG_RC],
+ [LT_LANG(RC)],
+ [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])])
+])# _LT_LANG_DEFAULT_CONFIG
+
+# Obsolete macros:
+AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)])
+AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)])
+AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)])
+AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)])
+AU_DEFUN([AC_LIBTOOL_RC], [LT_LANG(Windows Resource)])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_CXX], [])
+dnl AC_DEFUN([AC_LIBTOOL_F77], [])
+dnl AC_DEFUN([AC_LIBTOOL_FC], [])
+dnl AC_DEFUN([AC_LIBTOOL_GCJ], [])
+dnl AC_DEFUN([AC_LIBTOOL_RC], [])
+
+
+# _LT_TAG_COMPILER
+# ----------------
+m4_defun([_LT_TAG_COMPILER],
+[AC_REQUIRE([AC_PROG_CC])dnl
+
+_LT_DECL([LTCC], [CC], [1], [A C compiler])dnl
+_LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl
+_LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl
+_LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+])# _LT_TAG_COMPILER
+
+
+# _LT_COMPILER_BOILERPLATE
+# ------------------------
+# Check for compiler boilerplate output or warnings with
+# the simple compiler test code.
+m4_defun([_LT_COMPILER_BOILERPLATE],
+[m4_require([_LT_DECL_SED])dnl
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$RM conftest*
+])# _LT_COMPILER_BOILERPLATE
+
+
+# _LT_LINKER_BOILERPLATE
+# ----------------------
+# Check for linker boilerplate output or warnings with
+# the simple link test code.
+m4_defun([_LT_LINKER_BOILERPLATE],
+[m4_require([_LT_DECL_SED])dnl
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$RM -r conftest*
+])# _LT_LINKER_BOILERPLATE
+
+# _LT_REQUIRED_DARWIN_CHECKS
+# -------------------------
+m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[
+ case $host_os in
+ rhapsody* | darwin*)
+ AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:])
+ AC_CHECK_TOOL([NMEDIT], [nmedit], [:])
+ AC_CHECK_TOOL([LIPO], [lipo], [:])
+ AC_CHECK_TOOL([OTOOL], [otool], [:])
+ AC_CHECK_TOOL([OTOOL64], [otool64], [:])
+ _LT_DECL([], [DSYMUTIL], [1],
+ [Tool to manipulate archived DWARF debug symbol files on Mac OS X])
+ _LT_DECL([], [NMEDIT], [1],
+ [Tool to change global to local symbols on Mac OS X])
+ _LT_DECL([], [LIPO], [1],
+ [Tool to manipulate fat objects and archives on Mac OS X])
+ _LT_DECL([], [OTOOL], [1],
+ [ldd/readelf like tool for Mach-O binaries on Mac OS X])
+ _LT_DECL([], [OTOOL64], [1],
+ [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4])
+
+ AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod],
+ [lt_cv_apple_cc_single_mod=no
+ if test -z "${LT_MULTI_MODULE}"; then
+ # By default we will add the -single_module flag. You can override
+ # by either setting the environment variable LT_MULTI_MODULE
+ # non-empty at configure time, or by adding -multi_module to the
+ # link flags.
+ rm -rf libconftest.dylib*
+ echo "int foo(void){return 1;}" > conftest.c
+ echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+-dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD
+ $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+ -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
+ _lt_result=$?
+ # If there is a non-empty error log, and "single_module"
+ # appears in it, assume the flag caused a linker warning
+ if test -s conftest.err && $GREP single_module conftest.err; then
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ # Otherwise, if the output was created with a 0 exit code from
+ # the compiler, it worked.
+ elif test -f libconftest.dylib && test $_lt_result -eq 0; then
+ lt_cv_apple_cc_single_mod=yes
+ else
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ fi
+ rm -rf libconftest.dylib*
+ rm -f conftest.*
+ fi])
+
+ AC_CACHE_CHECK([for -exported_symbols_list linker flag],
+ [lt_cv_ld_exported_symbols_list],
+ [lt_cv_ld_exported_symbols_list=no
+ save_LDFLAGS=$LDFLAGS
+ echo "_main" > conftest.sym
+ LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
+ AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
+ [lt_cv_ld_exported_symbols_list=yes],
+ [lt_cv_ld_exported_symbols_list=no])
+ LDFLAGS="$save_LDFLAGS"
+ ])
+
+ AC_CACHE_CHECK([for -force_load linker flag],[lt_cv_ld_force_load],
+ [lt_cv_ld_force_load=no
+ cat > conftest.c << _LT_EOF
+int forced_loaded() { return 2;}
+_LT_EOF
+ echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&AS_MESSAGE_LOG_FD
+ $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&AS_MESSAGE_LOG_FD
+ echo "$AR cru libconftest.a conftest.o" >&AS_MESSAGE_LOG_FD
+ $AR cru libconftest.a conftest.o 2>&AS_MESSAGE_LOG_FD
+ echo "$RANLIB libconftest.a" >&AS_MESSAGE_LOG_FD
+ $RANLIB libconftest.a 2>&AS_MESSAGE_LOG_FD
+ cat > conftest.c << _LT_EOF
+int main() { return 0;}
+_LT_EOF
+ echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&AS_MESSAGE_LOG_FD
+ $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err
+ _lt_result=$?
+ if test -s conftest.err && $GREP force_load conftest.err; then
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then
+ lt_cv_ld_force_load=yes
+ else
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ fi
+ rm -f conftest.err libconftest.a conftest conftest.c
+ rm -rf conftest.dSYM
+ ])
+ case $host_os in
+ rhapsody* | darwin1.[[012]])
+ _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
+ darwin1.*)
+ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+ darwin*) # darwin 5.x on
+ # if running on 10.5 or later, the deployment target defaults
+ # to the OS version, if on x86, and 10.4, the deployment
+ # target defaults to 10.4. Don't you love it?
+ case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
+ 10.0,*86*-darwin8*|10.0,*-darwin[[91]]*)
+ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+ 10.[[012]]*)
+ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+ 10.*)
+ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+ esac
+ ;;
+ esac
+ if test "$lt_cv_apple_cc_single_mod" = "yes"; then
+ _lt_dar_single_mod='$single_module'
+ fi
+ if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
+ _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
+ else
+ _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
+ fi
+ if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then
+ _lt_dsymutil='~$DSYMUTIL $lib || :'
+ else
+ _lt_dsymutil=
+ fi
+ ;;
+ esac
+])
+
+
+# _LT_DARWIN_LINKER_FEATURES([TAG])
+# ---------------------------------
+# Checks for linker and compiler features on darwin
+m4_defun([_LT_DARWIN_LINKER_FEATURES],
+[
+ m4_require([_LT_REQUIRED_DARWIN_CHECKS])
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_automatic, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+ if test "$lt_cv_ld_force_load" = "yes"; then
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+ m4_case([$1], [F77], [_LT_TAGVAR(compiler_needs_object, $1)=yes],
+ [FC], [_LT_TAGVAR(compiler_needs_object, $1)=yes])
+ else
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=''
+ fi
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined"
+ case $cc_basename in
+ ifort*) _lt_dar_can_shared=yes ;;
+ *) _lt_dar_can_shared=$GCC ;;
+ esac
+ if test "$_lt_dar_can_shared" = "yes"; then
+ output_verbose_link_cmd=func_echo_all
+ _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+ _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+ _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+ _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+ m4_if([$1], [CXX],
+[ if test "$lt_cv_apple_cc_single_mod" != "yes"; then
+ _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
+ _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
+ fi
+],[])
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+])
+
+# _LT_SYS_MODULE_PATH_AIX([TAGNAME])
+# ----------------------------------
+# Links a minimal program and checks the executable
+# for the system default hardcoded library path. In most cases,
+# this is /usr/lib:/lib, but when the MPI compilers are used
+# the location of the communication and MPI libs are included too.
+# If we don't find anything, use the default library path according
+# to the aix ld manual.
+# Store the results from the different compilers for each TAGNAME.
+# Allow to override them for all tags through lt_cv_aix_libpath.
+m4_defun([_LT_SYS_MODULE_PATH_AIX],
+[m4_require([_LT_DECL_SED])dnl
+if test "${lt_cv_aix_libpath+set}" = set; then
+ aix_libpath=$lt_cv_aix_libpath
+else
+ AC_CACHE_VAL([_LT_TAGVAR([lt_cv_aix_libpath_], [$1])],
+ [AC_LINK_IFELSE([AC_LANG_PROGRAM],[
+ lt_aix_libpath_sed='[
+ /Import File Strings/,/^$/ {
+ /^0/ {
+ s/^0 *\([^ ]*\) *$/\1/
+ p
+ }
+ }]'
+ _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ # Check for a 64-bit object if we didn't find anything.
+ if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
+ _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ fi],[])
+ if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
+ _LT_TAGVAR([lt_cv_aix_libpath_], [$1])="/usr/lib:/lib"
+ fi
+ ])
+ aix_libpath=$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])
+fi
+])# _LT_SYS_MODULE_PATH_AIX
+
+
+# _LT_SHELL_INIT(ARG)
+# -------------------
+m4_define([_LT_SHELL_INIT],
+[m4_divert_text([M4SH-INIT], [$1
+])])# _LT_SHELL_INIT
+
+
+
+# _LT_PROG_ECHO_BACKSLASH
+# -----------------------
+# Find how we can fake an echo command that does not interpret backslash.
+# In particular, with Autoconf 2.60 or later we add some code to the start
+# of the generated configure script which will find a shell with a builtin
+# printf (which we can use as an echo command).
+m4_defun([_LT_PROG_ECHO_BACKSLASH],
+[ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
+
+AC_MSG_CHECKING([how to print strings])
+# Test print first, because it will be a builtin if present.
+if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \
+ test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
+ ECHO='print -r --'
+elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
+ ECHO='printf %s\n'
+else
+ # Use this function as a fallback that always works.
+ func_fallback_echo ()
+ {
+ eval 'cat <<_LTECHO_EOF
+$[]1
+_LTECHO_EOF'
+ }
+ ECHO='func_fallback_echo'
+fi
+
+# func_echo_all arg...
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+ $ECHO "$*"
+}
+
+case "$ECHO" in
+ printf*) AC_MSG_RESULT([printf]) ;;
+ print*) AC_MSG_RESULT([print -r]) ;;
+ *) AC_MSG_RESULT([cat]) ;;
+esac
+
+m4_ifdef([_AS_DETECT_SUGGESTED],
+[_AS_DETECT_SUGGESTED([
+ test -n "${ZSH_VERSION+set}${BASH_VERSION+set}" || (
+ ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+ ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
+ ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
+ PATH=/empty FPATH=/empty; export PATH FPATH
+ test "X`printf %s $ECHO`" = "X$ECHO" \
+ || test "X`print -r -- $ECHO`" = "X$ECHO" )])])
+
+_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts])
+_LT_DECL([], [ECHO], [1], [An echo program that protects backslashes])
+])# _LT_PROG_ECHO_BACKSLASH
+
+
+# _LT_WITH_SYSROOT
+# ----------------
+AC_DEFUN([_LT_WITH_SYSROOT],
+[AC_MSG_CHECKING([for sysroot])
+AC_ARG_WITH([sysroot],
+[ --with-sysroot[=DIR] Search for dependent libraries within DIR
+ (or the compiler's sysroot if not specified).],
+[], [with_sysroot=no])
+
+dnl lt_sysroot will always be passed unquoted. We quote it here
+dnl in case the user passed a directory name.
+lt_sysroot=
+case ${with_sysroot} in #(
+ yes)
+ if test "$GCC" = yes; then
+ lt_sysroot=`$CC --print-sysroot 2>/dev/null`
+ fi
+ ;; #(
+ /*)
+ lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"`
+ ;; #(
+ no|'')
+ ;; #(
+ *)
+ AC_MSG_RESULT([${with_sysroot}])
+ AC_MSG_ERROR([The sysroot must be an absolute path.])
+ ;;
+esac
+
+ AC_MSG_RESULT([${lt_sysroot:-no}])
+_LT_DECL([], [lt_sysroot], [0], [The root where to search for ]dnl
+[dependent libraries, and in which our libraries should be installed.])])
+
+# _LT_ENABLE_LOCK
+# ---------------
+m4_defun([_LT_ENABLE_LOCK],
+[AC_ARG_ENABLE([libtool-lock],
+ [AS_HELP_STRING([--disable-libtool-lock],
+ [avoid locking (might break parallel builds)])])
+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case $host in
+ia64-*-hpux*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+ if AC_TRY_EVAL(ac_compile); then
+ case `/usr/bin/file conftest.$ac_objext` in
+ *ELF-32*)
+ HPUX_IA64_MODE="32"
+ ;;
+ *ELF-64*)
+ HPUX_IA64_MODE="64"
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+*-*-irix6*)
+ # Find out which ABI we are using.
+ echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext
+ if AC_TRY_EVAL(ac_compile); then
+ if test "$lt_cv_prog_gnu_ld" = yes; then
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ LD="${LD-ld} -melf32bsmip"
+ ;;
+ *N32*)
+ LD="${LD-ld} -melf32bmipn32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -melf64bmip"
+ ;;
+ esac
+ else
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ LD="${LD-ld} -32"
+ ;;
+ *N32*)
+ LD="${LD-ld} -n32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -64"
+ ;;
+ esac
+ fi
+ fi
+ rm -rf conftest*
+ ;;
+
+x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
+s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+ if AC_TRY_EVAL(ac_compile); then
+ case `/usr/bin/file conftest.o` in
+ *32-bit*)
+ case $host in
+ x86_64-*kfreebsd*-gnu)
+ LD="${LD-ld} -m elf_i386_fbsd"
+ ;;
+ x86_64-*linux*)
+ LD="${LD-ld} -m elf_i386"
+ ;;
+ ppc64-*linux*|powerpc64-*linux*)
+ LD="${LD-ld} -m elf32ppclinux"
+ ;;
+ s390x-*linux*)
+ LD="${LD-ld} -m elf_s390"
+ ;;
+ sparc64-*linux*)
+ LD="${LD-ld} -m elf32_sparc"
+ ;;
+ esac
+ ;;
+ *64-bit*)
+ case $host in
+ x86_64-*kfreebsd*-gnu)
+ LD="${LD-ld} -m elf_x86_64_fbsd"
+ ;;
+ x86_64-*linux*)
+ LD="${LD-ld} -m elf_x86_64"
+ ;;
+ ppc*-*linux*|powerpc*-*linux*)
+ LD="${LD-ld} -m elf64ppc"
+ ;;
+ s390*-*linux*|s390*-*tpf*)
+ LD="${LD-ld} -m elf64_s390"
+ ;;
+ sparc*-*linux*)
+ LD="${LD-ld} -m elf64_sparc"
+ ;;
+ esac
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+
+*-*-sco3.2v5*)
+ # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+ SAVE_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS -belf"
+ AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
+ [AC_LANG_PUSH(C)
+ AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
+ AC_LANG_POP])
+ if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+ # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+ CFLAGS="$SAVE_CFLAGS"
+ fi
+ ;;
+*-*solaris*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+ if AC_TRY_EVAL(ac_compile); then
+ case `/usr/bin/file conftest.o` in
+ *64-bit*)
+ case $lt_cv_prog_gnu_ld in
+ yes*)
+ case $host in
+ i?86-*-solaris*)
+ LD="${LD-ld} -m elf_x86_64"
+ ;;
+ sparc*-*-solaris*)
+ LD="${LD-ld} -m elf64_sparc"
+ ;;
+ esac
+ # GNU ld 2.21 introduced _sol2 emulations. Use them if available.
+ if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then
+ LD="${LD-ld}_sol2"
+ fi
+ ;;
+ *)
+ if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
+ LD="${LD-ld} -64"
+ fi
+ ;;
+ esac
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+esac
+
+need_locks="$enable_libtool_lock"
+])# _LT_ENABLE_LOCK
+
+
+# _LT_PROG_AR
+# -----------
+m4_defun([_LT_PROG_AR],
+[AC_CHECK_TOOLS(AR, [ar], false)
+: ${AR=ar}
+: ${AR_FLAGS=cru}
+_LT_DECL([], [AR], [1], [The archiver])
+_LT_DECL([], [AR_FLAGS], [1], [Flags to create an archive])
+
+AC_CACHE_CHECK([for archiver @FILE support], [lt_cv_ar_at_file],
+ [lt_cv_ar_at_file=no
+ AC_COMPILE_IFELSE([AC_LANG_PROGRAM],
+ [echo conftest.$ac_objext > conftest.lst
+ lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&AS_MESSAGE_LOG_FD'
+ AC_TRY_EVAL([lt_ar_try])
+ if test "$ac_status" -eq 0; then
+ # Ensure the archiver fails upon bogus file names.
+ rm -f conftest.$ac_objext libconftest.a
+ AC_TRY_EVAL([lt_ar_try])
+ if test "$ac_status" -ne 0; then
+ lt_cv_ar_at_file=@
+ fi
+ fi
+ rm -f conftest.* libconftest.a
+ ])
+ ])
+
+if test "x$lt_cv_ar_at_file" = xno; then
+ archiver_list_spec=
+else
+ archiver_list_spec=$lt_cv_ar_at_file
+fi
+_LT_DECL([], [archiver_list_spec], [1],
+ [How to feed a file listing to the archiver])
+])# _LT_PROG_AR
+
+
+# _LT_CMD_OLD_ARCHIVE
+# -------------------
+m4_defun([_LT_CMD_OLD_ARCHIVE],
+[_LT_PROG_AR
+
+AC_CHECK_TOOL(STRIP, strip, :)
+test -z "$STRIP" && STRIP=:
+_LT_DECL([], [STRIP], [1], [A symbol stripping program])
+
+AC_CHECK_TOOL(RANLIB, ranlib, :)
+test -z "$RANLIB" && RANLIB=:
+_LT_DECL([], [RANLIB], [1],
+ [Commands used to install an old-style archive])
+
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
+
+if test -n "$RANLIB"; then
+ case $host_os in
+ openbsd*)
+ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib"
+ ;;
+ *)
+ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib"
+ ;;
+ esac
+ old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib"
+fi
+
+case $host_os in
+ darwin*)
+ lock_old_archive_extraction=yes ;;
+ *)
+ lock_old_archive_extraction=no ;;
+esac
+_LT_DECL([], [old_postinstall_cmds], [2])
+_LT_DECL([], [old_postuninstall_cmds], [2])
+_LT_TAGDECL([], [old_archive_cmds], [2],
+ [Commands used to build an old-style archive])
+_LT_DECL([], [lock_old_archive_extraction], [0],
+ [Whether to use a lock for old archive extraction])
+])# _LT_CMD_OLD_ARCHIVE
+
+
+# _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
+# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
+# ----------------------------------------------------------------
+# Check whether the given compiler option works
+AC_DEFUN([_LT_COMPILER_OPTION],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_SED])dnl
+AC_CACHE_CHECK([$1], [$2],
+ [$2=no
+ m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+ lt_compiler_flag="$3"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ # The option is referenced via a variable to avoid confusing sed.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+ (eval "$lt_compile" 2>conftest.err)
+ ac_status=$?
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+ if (exit $ac_status) && test -s "$ac_outfile"; then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings other than the usual output.
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+ $2=yes
+ fi
+ fi
+ $RM conftest*
+])
+
+if test x"[$]$2" = xyes; then
+ m4_if([$5], , :, [$5])
+else
+ m4_if([$6], , :, [$6])
+fi
+])# _LT_COMPILER_OPTION
+
+# Old name:
+AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], [])
+
+
+# _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
+# [ACTION-SUCCESS], [ACTION-FAILURE])
+# ----------------------------------------------------
+# Check whether the given linker option works
+AC_DEFUN([_LT_LINKER_OPTION],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_SED])dnl
+AC_CACHE_CHECK([$1], [$2],
+ [$2=no
+ save_LDFLAGS="$LDFLAGS"
+ LDFLAGS="$LDFLAGS $3"
+ echo "$lt_simple_link_test_code" > conftest.$ac_ext
+ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+ # The linker can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ if test -s conftest.err; then
+ # Append any errors to the config.log.
+ cat conftest.err 1>&AS_MESSAGE_LOG_FD
+ $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if diff conftest.exp conftest.er2 >/dev/null; then
+ $2=yes
+ fi
+ else
+ $2=yes
+ fi
+ fi
+ $RM -r conftest*
+ LDFLAGS="$save_LDFLAGS"
+])
+
+if test x"[$]$2" = xyes; then
+ m4_if([$4], , :, [$4])
+else
+ m4_if([$5], , :, [$5])
+fi
+])# _LT_LINKER_OPTION
+
+# Old name:
+AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], [])
+
+
+# LT_CMD_MAX_LEN
+#---------------
+AC_DEFUN([LT_CMD_MAX_LEN],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+# find the maximum length of command line arguments
+AC_MSG_CHECKING([the maximum length of command line arguments])
+AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
+ i=0
+ teststring="ABCD"
+
+ case $build_os in
+ msdosdjgpp*)
+ # On DJGPP, this test can blow up pretty badly due to problems in libc
+ # (any single argument exceeding 2000 bytes causes a buffer overrun
+ # during glob expansion). Even if it were fixed, the result of this
+ # check would be larger than it should be.
+ lt_cv_sys_max_cmd_len=12288; # 12K is about right
+ ;;
+
+ gnu*)
+ # Under GNU Hurd, this test is not required because there is
+ # no limit to the length of command line arguments.
+ # Libtool will interpret -1 as no limit whatsoever
+ lt_cv_sys_max_cmd_len=-1;
+ ;;
+
+ cygwin* | mingw* | cegcc*)
+ # On Win9x/ME, this test blows up -- it succeeds, but takes
+ # about 5 minutes as the teststring grows exponentially.
+ # Worse, since 9x/ME are not pre-emptively multitasking,
+ # you end up with a "frozen" computer, even though with patience
+ # the test eventually succeeds (with a max line length of 256k).
+ # Instead, let's just punt: use the minimum linelength reported by
+ # all of the supported platforms: 8192 (on NT/2K/XP).
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
+
+ mint*)
+ # On MiNT this can take a long time and run out of memory.
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
+
+ amigaos*)
+ # On AmigaOS with pdksh, this test takes hours, literally.
+ # So we just punt and use a minimum line length of 8192.
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
+
+ netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+ # This has been around since 386BSD, at least. Likely further.
+ if test -x /sbin/sysctl; then
+ lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
+ elif test -x /usr/sbin/sysctl; then
+ lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
+ else
+ lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs
+ fi
+ # And add a safety zone
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+ ;;
+
+ interix*)
+ # We know the value 262144 and hardcode it with a safety zone (like BSD)
+ lt_cv_sys_max_cmd_len=196608
+ ;;
+
+ os2*)
+ # The test takes a long time on OS/2.
+ lt_cv_sys_max_cmd_len=8192
+ ;;
+
+ osf*)
+ # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
+ # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
+ # nice to cause kernel panics so lets avoid the loop below.
+ # First set a reasonable default.
+ lt_cv_sys_max_cmd_len=16384
+ #
+ if test -x /sbin/sysconfig; then
+ case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
+ *1*) lt_cv_sys_max_cmd_len=-1 ;;
+ esac
+ fi
+ ;;
+ sco3.2v5*)
+ lt_cv_sys_max_cmd_len=102400
+ ;;
+ sysv5* | sco5v6* | sysv4.2uw2*)
+ kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
+ if test -n "$kargmax"; then
+ lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'`
+ else
+ lt_cv_sys_max_cmd_len=32768
+ fi
+ ;;
+ *)
+ lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
+ if test -n "$lt_cv_sys_max_cmd_len"; then
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+ else
+ # Make teststring a little bigger before we do anything with it.
+ # a 1K string should be a reasonable start.
+ for i in 1 2 3 4 5 6 7 8 ; do
+ teststring=$teststring$teststring
+ done
+ SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+ # If test is not a shell built-in, we'll probably end up computing a
+ # maximum length that is only half of the actual maximum length, but
+ # we can't tell.
+ while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \
+ = "X$teststring$teststring"; } >/dev/null 2>&1 &&
+ test $i != 17 # 1/2 MB should be enough
+ do
+ i=`expr $i + 1`
+ teststring=$teststring$teststring
+ done
+ # Only check the string length outside the loop.
+ lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
+ teststring=
+ # Add a significant safety factor because C++ compilers can tack on
+ # massive amounts of additional arguments before passing them to the
+ # linker. It appears as though 1/2 is a usable value.
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+ fi
+ ;;
+ esac
+])
+if test -n $lt_cv_sys_max_cmd_len ; then
+ AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
+else
+ AC_MSG_RESULT(none)
+fi
+max_cmd_len=$lt_cv_sys_max_cmd_len
+_LT_DECL([], [max_cmd_len], [0],
+ [What is the maximum length of a command?])
+])# LT_CMD_MAX_LEN
+
+# Old name:
+AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], [])
+
+
+# _LT_HEADER_DLFCN
+# ----------------
+m4_defun([_LT_HEADER_DLFCN],
+[AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl
+])# _LT_HEADER_DLFCN
+
+
+# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
+# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
+# ----------------------------------------------------------------
+m4_defun([_LT_TRY_DLOPEN_SELF],
+[m4_require([_LT_HEADER_DLFCN])dnl
+if test "$cross_compiling" = yes; then :
+ [$4]
+else
+ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+ lt_status=$lt_dlunknown
+ cat > conftest.$ac_ext <<_LT_EOF
+[#line $LINENO "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+# define LT_DLGLOBAL RTLD_GLOBAL
+#else
+# ifdef DL_GLOBAL
+# define LT_DLGLOBAL DL_GLOBAL
+# else
+# define LT_DLGLOBAL 0
+# endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+ find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+# ifdef RTLD_LAZY
+# define LT_DLLAZY_OR_NOW RTLD_LAZY
+# else
+# ifdef DL_LAZY
+# define LT_DLLAZY_OR_NOW DL_LAZY
+# else
+# ifdef RTLD_NOW
+# define LT_DLLAZY_OR_NOW RTLD_NOW
+# else
+# ifdef DL_NOW
+# define LT_DLLAZY_OR_NOW DL_NOW
+# else
+# define LT_DLLAZY_OR_NOW 0
+# endif
+# endif
+# endif
+# endif
+#endif
+
+/* When -fvisbility=hidden is used, assume the code has been annotated
+ correspondingly for the symbols needed. */
+#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+int fnord () __attribute__((visibility("default")));
+#endif
+
+int fnord () { return 42; }
+int main ()
+{
+ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+ int status = $lt_dlunknown;
+
+ if (self)
+ {
+ if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
+ else
+ {
+ if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+ else puts (dlerror ());
+ }
+ /* dlclose (self); */
+ }
+ else
+ puts (dlerror ());
+
+ return status;
+}]
+_LT_EOF
+ if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
+ (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
+ lt_status=$?
+ case x$lt_status in
+ x$lt_dlno_uscore) $1 ;;
+ x$lt_dlneed_uscore) $2 ;;
+ x$lt_dlunknown|x*) $3 ;;
+ esac
+ else :
+ # compilation failed
+ $3
+ fi
+fi
+rm -fr conftest*
+])# _LT_TRY_DLOPEN_SELF
+
+
+# LT_SYS_DLOPEN_SELF
+# ------------------
+AC_DEFUN([LT_SYS_DLOPEN_SELF],
+[m4_require([_LT_HEADER_DLFCN])dnl
+if test "x$enable_dlopen" != xyes; then
+ enable_dlopen=unknown
+ enable_dlopen_self=unknown
+ enable_dlopen_self_static=unknown
+else
+ lt_cv_dlopen=no
+ lt_cv_dlopen_libs=
+
+ case $host_os in
+ beos*)
+ lt_cv_dlopen="load_add_on"
+ lt_cv_dlopen_libs=
+ lt_cv_dlopen_self=yes
+ ;;
+
+ mingw* | pw32* | cegcc*)
+ lt_cv_dlopen="LoadLibrary"
+ lt_cv_dlopen_libs=
+ ;;
+
+ cygwin*)
+ lt_cv_dlopen="dlopen"
+ lt_cv_dlopen_libs=
+ ;;
+
+ darwin*)
+ # if libdl is installed we need to link against it
+ AC_CHECK_LIB([dl], [dlopen],
+ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[
+ lt_cv_dlopen="dyld"
+ lt_cv_dlopen_libs=
+ lt_cv_dlopen_self=yes
+ ])
+ ;;
+
+ *)
+ AC_CHECK_FUNC([shl_load],
+ [lt_cv_dlopen="shl_load"],
+ [AC_CHECK_LIB([dld], [shl_load],
+ [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"],
+ [AC_CHECK_FUNC([dlopen],
+ [lt_cv_dlopen="dlopen"],
+ [AC_CHECK_LIB([dl], [dlopen],
+ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
+ [AC_CHECK_LIB([svld], [dlopen],
+ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
+ [AC_CHECK_LIB([dld], [dld_link],
+ [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"])
+ ])
+ ])
+ ])
+ ])
+ ])
+ ;;
+ esac
+
+ if test "x$lt_cv_dlopen" != xno; then
+ enable_dlopen=yes
+ else
+ enable_dlopen=no
+ fi
+
+ case $lt_cv_dlopen in
+ dlopen)
+ save_CPPFLAGS="$CPPFLAGS"
+ test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+
+ save_LDFLAGS="$LDFLAGS"
+ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
+
+ save_LIBS="$LIBS"
+ LIBS="$lt_cv_dlopen_libs $LIBS"
+
+ AC_CACHE_CHECK([whether a program can dlopen itself],
+ lt_cv_dlopen_self, [dnl
+ _LT_TRY_DLOPEN_SELF(
+ lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
+ lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
+ ])
+
+ if test "x$lt_cv_dlopen_self" = xyes; then
+ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
+ AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
+ lt_cv_dlopen_self_static, [dnl
+ _LT_TRY_DLOPEN_SELF(
+ lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
+ lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross)
+ ])
+ fi
+
+ CPPFLAGS="$save_CPPFLAGS"
+ LDFLAGS="$save_LDFLAGS"
+ LIBS="$save_LIBS"
+ ;;
+ esac
+
+ case $lt_cv_dlopen_self in
+ yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
+ *) enable_dlopen_self=unknown ;;
+ esac
+
+ case $lt_cv_dlopen_self_static in
+ yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
+ *) enable_dlopen_self_static=unknown ;;
+ esac
+fi
+_LT_DECL([dlopen_support], [enable_dlopen], [0],
+ [Whether dlopen is supported])
+_LT_DECL([dlopen_self], [enable_dlopen_self], [0],
+ [Whether dlopen of programs is supported])
+_LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0],
+ [Whether dlopen of statically linked programs is supported])
+])# LT_SYS_DLOPEN_SELF
+
+# Old name:
+AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], [])
+
+
+# _LT_COMPILER_C_O([TAGNAME])
+# ---------------------------
+# Check to see if options -c and -o are simultaneously supported by compiler.
+# This macro does not hard code the compiler like AC_PROG_CC_C_O.
+m4_defun([_LT_COMPILER_C_O],
+[m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_TAG_COMPILER])dnl
+AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
+ [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
+ [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
+ $RM -r conftest 2>/dev/null
+ mkdir conftest
+ cd conftest
+ mkdir out
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+ lt_compiler_flag="-o out/conftest2.$ac_objext"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+ (eval "$lt_compile" 2>out/conftest.err)
+ ac_status=$?
+ cat out/conftest.err >&AS_MESSAGE_LOG_FD
+ echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+ if (exit $ac_status) && test -s out/conftest2.$ac_objext
+ then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+ _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
+ fi
+ fi
+ chmod u+w . 2>&AS_MESSAGE_LOG_FD
+ $RM conftest*
+ # SGI C++ compiler will create directory out/ii_files/ for
+ # template instantiation
+ test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+ $RM out/* && rmdir out
+ cd ..
+ $RM -r conftest
+ $RM conftest*
+])
+_LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1],
+ [Does compiler simultaneously support -c and -o options?])
+])# _LT_COMPILER_C_O
+
+
+# _LT_COMPILER_FILE_LOCKS([TAGNAME])
+# ----------------------------------
+# Check to see if we can do hard links to lock some files if needed
+m4_defun([_LT_COMPILER_FILE_LOCKS],
+[m4_require([_LT_ENABLE_LOCK])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+_LT_COMPILER_C_O([$1])
+
+hard_links="nottested"
+if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
+ # do not overwrite the value of need_locks provided by the user
+ AC_MSG_CHECKING([if we can lock with hard links])
+ hard_links=yes
+ $RM conftest*
+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
+ touch conftest.a
+ ln conftest.a conftest.b 2>&5 || hard_links=no
+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
+ AC_MSG_RESULT([$hard_links])
+ if test "$hard_links" = no; then
+ AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])
+ need_locks=warn
+ fi
+else
+ need_locks=no
+fi
+_LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?])
+])# _LT_COMPILER_FILE_LOCKS
+
+
+# _LT_CHECK_OBJDIR
+# ----------------
+m4_defun([_LT_CHECK_OBJDIR],
+[AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
+[rm -f .libs 2>/dev/null
+mkdir .libs 2>/dev/null
+if test -d .libs; then
+ lt_cv_objdir=.libs
+else
+ # MS-DOS does not allow filenames that begin with a dot.
+ lt_cv_objdir=_libs
+fi
+rmdir .libs 2>/dev/null])
+objdir=$lt_cv_objdir
+_LT_DECL([], [objdir], [0],
+ [The name of the directory that contains temporary libtool files])dnl
+m4_pattern_allow([LT_OBJDIR])dnl
+AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/",
+ [Define to the sub-directory in which libtool stores uninstalled libraries.])
+])# _LT_CHECK_OBJDIR
+
+
+# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME])
+# --------------------------------------
+# Check hardcoding attributes.
+m4_defun([_LT_LINKER_HARDCODE_LIBPATH],
+[AC_MSG_CHECKING([how to hardcode library paths into programs])
+_LT_TAGVAR(hardcode_action, $1)=
+if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" ||
+ test -n "$_LT_TAGVAR(runpath_var, $1)" ||
+ test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then
+
+ # We can hardcode non-existent directories.
+ if test "$_LT_TAGVAR(hardcode_direct, $1)" != no &&
+ # If the only mechanism to avoid hardcoding is shlibpath_var, we
+ # have to relink, otherwise we might link with an installed library
+ # when we should be linking with a yet-to-be-installed one
+ ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
+ test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then
+ # Linking always hardcodes the temporary library directory.
+ _LT_TAGVAR(hardcode_action, $1)=relink
+ else
+ # We can link without hardcoding, and we can hardcode nonexisting dirs.
+ _LT_TAGVAR(hardcode_action, $1)=immediate
+ fi
+else
+ # We cannot hardcode anything, or else we can only hardcode existing
+ # directories.
+ _LT_TAGVAR(hardcode_action, $1)=unsupported
+fi
+AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)])
+
+if test "$_LT_TAGVAR(hardcode_action, $1)" = relink ||
+ test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then
+ # Fast installation is not supported
+ enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+ test "$enable_shared" = no; then
+ # Fast installation is not necessary
+ enable_fast_install=needless
+fi
+_LT_TAGDECL([], [hardcode_action], [0],
+ [How to hardcode a shared library path into an executable])
+])# _LT_LINKER_HARDCODE_LIBPATH
+
+
+# _LT_CMD_STRIPLIB
+# ----------------
+m4_defun([_LT_CMD_STRIPLIB],
+[m4_require([_LT_DECL_EGREP])
+striplib=
+old_striplib=
+AC_MSG_CHECKING([whether stripping libraries is possible])
+if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
+ test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+ test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+ AC_MSG_RESULT([yes])
+else
+# FIXME - insert some real tests, host_os isn't really good enough
+ case $host_os in
+ darwin*)
+ if test -n "$STRIP" ; then
+ striplib="$STRIP -x"
+ old_striplib="$STRIP -S"
+ AC_MSG_RESULT([yes])
+ else
+ AC_MSG_RESULT([no])
+ fi
+ ;;
+ *)
+ AC_MSG_RESULT([no])
+ ;;
+ esac
+fi
+_LT_DECL([], [old_striplib], [1], [Commands to strip libraries])
+_LT_DECL([], [striplib], [1])
+])# _LT_CMD_STRIPLIB
+
+
+# _LT_SYS_DYNAMIC_LINKER([TAG])
+# -----------------------------
+# PORTME Fill in your ld.so characteristics
+m4_defun([_LT_SYS_DYNAMIC_LINKER],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_OBJDUMP])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_CHECK_SHELL_FEATURES])dnl
+AC_MSG_CHECKING([dynamic linker characteristics])
+m4_if([$1],
+ [], [
+if test "$GCC" = yes; then
+ case $host_os in
+ darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
+ *) lt_awk_arg="/^libraries:/" ;;
+ esac
+ case $host_os in
+ mingw* | cegcc*) lt_sed_strip_eq="s,=\([[A-Za-z]]:\),\1,g" ;;
+ *) lt_sed_strip_eq="s,=/,/,g" ;;
+ esac
+ lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
+ case $lt_search_path_spec in
+ *\;*)
+ # if the path contains ";" then we assume it to be the separator
+ # otherwise default to the standard path separator (i.e. ":") - it is
+ # assumed that no part of a normal pathname contains ";" but that should
+ # okay in the real world where ";" in dirpaths is itself problematic.
+ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'`
+ ;;
+ *)
+ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"`
+ ;;
+ esac
+ # Ok, now we have the path, separated by spaces, we can step through it
+ # and add multilib dir if necessary.
+ lt_tmp_lt_search_path_spec=
+ lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+ for lt_sys_path in $lt_search_path_spec; do
+ if test -d "$lt_sys_path/$lt_multi_os_dir"; then
+ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
+ else
+ test -d "$lt_sys_path" && \
+ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
+ fi
+ done
+ lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
+BEGIN {RS=" "; FS="/|\n";} {
+ lt_foo="";
+ lt_count=0;
+ for (lt_i = NF; lt_i > 0; lt_i--) {
+ if ($lt_i != "" && $lt_i != ".") {
+ if ($lt_i == "..") {
+ lt_count++;
+ } else {
+ if (lt_count == 0) {
+ lt_foo="/" $lt_i lt_foo;
+ } else {
+ lt_count--;
+ }
+ }
+ }
+ }
+ if (lt_foo != "") { lt_freq[[lt_foo]]++; }
+ if (lt_freq[[lt_foo]] == 1) { print lt_foo; }
+}'`
+ # AWK program above erroneously prepends '/' to C:/dos/paths
+ # for these hosts.
+ case $host_os in
+ mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
+ $SED 's,/\([[A-Za-z]]:\),\1,g'` ;;
+ esac
+ sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
+else
+ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+fi])
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=".so"
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+need_lib_prefix=unknown
+hardcode_into_libs=no
+
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
+
+case $host_os in
+aix3*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+ shlibpath_var=LIBPATH
+
+ # AIX 3 has no versioning support, so we append a major version to the name.
+ soname_spec='${libname}${release}${shared_ext}$major'
+ ;;
+
+aix[[4-9]]*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ hardcode_into_libs=yes
+ if test "$host_cpu" = ia64; then
+ # AIX 5 supports IA64
+ library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ else
+ # With GCC up to 2.95.x, collect2 would create an import file
+ # for dependence libraries. The import file would start with
+ # the line `#! .'. This would cause the generated library to
+ # depend on `.', always an invalid library. This was fixed in
+ # development snapshots of GCC prior to 3.0.
+ case $host_os in
+ aix4 | aix4.[[01]] | aix4.[[01]].*)
+ if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+ echo ' yes '
+ echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
+ :
+ else
+ can_build_shared=no
+ fi
+ ;;
+ esac
+ # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+ # soname into executable. Probably we can add versioning support to
+ # collect2, so additional links can be useful in future.
+ if test "$aix_use_runtimelinking" = yes; then
+ # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+ # instead of lib<name>.a to let people know that these are not
+ # typical AIX shared libraries.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ else
+ # We preserve .a as extension for shared libraries through AIX4.2
+ # and later when we are not doing run time linking.
+ library_names_spec='${libname}${release}.a $libname.a'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ fi
+ shlibpath_var=LIBPATH
+ fi
+ ;;
+
+amigaos*)
+ case $host_cpu in
+ powerpc)
+ # Since July 2007 AmigaOS4 officially supports .so libraries.
+ # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ ;;
+ m68k)
+ library_names_spec='$libname.ixlibrary $libname.a'
+ # Create ${libname}_ixlibrary.a entries in /sys/libs.
+ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+ ;;
+ esac
+ ;;
+
+beos*)
+ library_names_spec='${libname}${shared_ext}'
+ dynamic_linker="$host_os ld.so"
+ shlibpath_var=LIBRARY_PATH
+ ;;
+
+bsdi[[45]]*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+ sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+ # the default ld.so.conf also contains /usr/contrib/lib and
+ # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+ # libtool to hard-code these into programs
+ ;;
+
+cygwin* | mingw* | pw32* | cegcc*)
+ version_type=windows
+ shrext_cmds=".dll"
+ need_version=no
+ need_lib_prefix=no
+
+ case $GCC,$cc_basename in
+ yes,*)
+ # gcc
+ library_names_spec='$libname.dll.a'
+ # DLL is installed to $(libdir)/../bin by postinstall_cmds
+ postinstall_cmds='base_file=`basename \${file}`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+ dldir=$destdir/`dirname \$dlpath`~
+ test -d \$dldir || mkdir -p \$dldir~
+ $install_prog $dir/$dlname \$dldir/$dlname~
+ chmod a+x \$dldir/$dlname~
+ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+ eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+ fi'
+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+ dlpath=$dir/\$dldll~
+ $RM \$dlpath'
+ shlibpath_overrides_runpath=yes
+
+ case $host_os in
+ cygwin*)
+ # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+ soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+m4_if([$1], [],[
+ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"])
+ ;;
+ mingw* | cegcc*)
+ # MinGW DLLs use traditional 'lib' prefix
+ soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+ ;;
+ pw32*)
+ # pw32 DLLs use 'pw' prefix rather than 'lib'
+ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+ ;;
+ esac
+ dynamic_linker='Win32 ld.exe'
+ ;;
+
+ *,cl*)
+ # Native MSVC
+ libname_spec='$name'
+ soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+ library_names_spec='${libname}.dll.lib'
+
+ case $build_os in
+ mingw*)
+ sys_lib_search_path_spec=
+ lt_save_ifs=$IFS
+ IFS=';'
+ for lt_path in $LIB
+ do
+ IFS=$lt_save_ifs
+ # Let DOS variable expansion print the short 8.3 style file name.
+ lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
+ sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
+ done
+ IFS=$lt_save_ifs
+ # Convert to MSYS style.
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([[a-zA-Z]]\\):| /\\1|g' -e 's|^ ||'`
+ ;;
+ cygwin*)
+ # Convert to unix form, then to dos form, then back to unix form
+ # but this time dos style (no spaces!) so that the unix form looks
+ # like /cygdrive/c/PROGRA~1:/cygdr...
+ sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
+ sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
+ sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+ ;;
+ *)
+ sys_lib_search_path_spec="$LIB"
+ if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then
+ # It is most probably a Windows format PATH.
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+ else
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+ fi
+ # FIXME: find the short name or the path components, as spaces are
+ # common. (e.g. "Program Files" -> "PROGRA~1")
+ ;;
+ esac
+
+ # DLL is installed to $(libdir)/../bin by postinstall_cmds
+ postinstall_cmds='base_file=`basename \${file}`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+ dldir=$destdir/`dirname \$dlpath`~
+ test -d \$dldir || mkdir -p \$dldir~
+ $install_prog $dir/$dlname \$dldir/$dlname'
+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+ dlpath=$dir/\$dldll~
+ $RM \$dlpath'
+ shlibpath_overrides_runpath=yes
+ dynamic_linker='Win32 link.exe'
+ ;;
+
+ *)
+ # Assume MSVC wrapper
+ library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
+ dynamic_linker='Win32 ld.exe'
+ ;;
+ esac
+ # FIXME: first we should search . and the directory the executable is in
+ shlibpath_var=PATH
+ ;;
+
+darwin* | rhapsody*)
+ dynamic_linker="$host_os dyld"
+ version_type=darwin
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+ soname_spec='${libname}${release}${major}$shared_ext'
+ shlibpath_overrides_runpath=yes
+ shlibpath_var=DYLD_LIBRARY_PATH
+ shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+m4_if([$1], [],[
+ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"])
+ sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+ ;;
+
+dgux*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ ;;
+
+freebsd* | dragonfly*)
+ # DragonFly does not have aout. When/if they implement a new
+ # versioning mechanism, adjust this.
+ if test -x /usr/bin/objformat; then
+ objformat=`/usr/bin/objformat`
+ else
+ case $host_os in
+ freebsd[[23]].*) objformat=aout ;;
+ *) objformat=elf ;;
+ esac
+ fi
+ version_type=freebsd-$objformat
+ case $version_type in
+ freebsd-elf*)
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+ need_version=no
+ need_lib_prefix=no
+ ;;
+ freebsd-*)
+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+ need_version=yes
+ ;;
+ esac
+ shlibpath_var=LD_LIBRARY_PATH
+ case $host_os in
+ freebsd2.*)
+ shlibpath_overrides_runpath=yes
+ ;;
+ freebsd3.[[01]]* | freebsdelf3.[[01]]*)
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+ freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \
+ freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1)
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+ *) # from 4.6 on, and DragonFly
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+ esac
+ ;;
+
+gnu*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+
+haiku*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ dynamic_linker="$host_os runtime_loader"
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
+ hardcode_into_libs=yes
+ ;;
+
+hpux9* | hpux10* | hpux11*)
+ # Give a soname corresponding to the major version so that dld.sl refuses to
+ # link against other versions.
+ version_type=sunos
+ need_lib_prefix=no
+ need_version=no
+ case $host_cpu in
+ ia64*)
+ shrext_cmds='.so'
+ hardcode_into_libs=yes
+ dynamic_linker="$host_os dld.so"
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ if test "X$HPUX_IA64_MODE" = X32; then
+ sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+ else
+ sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+ fi
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ ;;
+ hppa*64*)
+ shrext_cmds='.sl'
+ hardcode_into_libs=yes
+ dynamic_linker="$host_os dld.sl"
+ shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ ;;
+ *)
+ shrext_cmds='.sl'
+ dynamic_linker="$host_os dld.sl"
+ shlibpath_var=SHLIB_PATH
+ shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ ;;
+ esac
+ # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
+ postinstall_cmds='chmod 555 $lib'
+ # or fails outright, so override atomically:
+ install_override_mode=555
+ ;;
+
+interix[[3-9]]*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+
+irix5* | irix6* | nonstopux*)
+ case $host_os in
+ nonstopux*) version_type=nonstopux ;;
+ *)
+ if test "$lt_cv_prog_gnu_ld" = yes; then
+ version_type=linux # correct to gnu/linux during the next big refactor
+ else
+ version_type=irix
+ fi ;;
+ esac
+ need_lib_prefix=no
+ need_version=no
+ soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+ case $host_os in
+ irix5* | nonstopux*)
+ libsuff= shlibsuff=
+ ;;
+ *)
+ case $LD in # libtool.m4 will add one of these switches to LD
+ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+ libsuff= shlibsuff= libmagic=32-bit;;
+ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+ libsuff=32 shlibsuff=N32 libmagic=N32;;
+ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+ libsuff=64 shlibsuff=64 libmagic=64-bit;;
+ *) libsuff= shlibsuff= libmagic=never-match;;
+ esac
+ ;;
+ esac
+ shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+ shlibpath_overrides_runpath=no
+ sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+ sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+ hardcode_into_libs=yes
+ ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+ dynamic_linker=no
+ ;;
+
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+
+ # Some binutils ld are patched to set DT_RUNPATH
+ AC_CACHE_VAL([lt_cv_shlibpath_overrides_runpath],
+ [lt_cv_shlibpath_overrides_runpath=no
+ save_LDFLAGS=$LDFLAGS
+ save_libdir=$libdir
+ eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \
+ LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\""
+ AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
+ [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null],
+ [lt_cv_shlibpath_overrides_runpath=yes])])
+ LDFLAGS=$save_LDFLAGS
+ libdir=$save_libdir
+ ])
+ shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
+
+ # This implies no fast_install, which is unacceptable.
+ # Some rework will be needed to allow for fast_install
+ # before this can be enabled.
+ hardcode_into_libs=yes
+
+ # Append ld.so.conf contents to the search path
+ if test -f /etc/ld.so.conf; then
+ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
+ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+ fi
+
+ # We used to test for /lib/ld.so.1 and disable shared libraries on
+ # powerpc, because MkLinux only supported shared libraries with the
+ # GNU dynamic linker. Since this was broken with cross compilers,
+ # most powerpc-linux boxes support dynamic linking these days and
+ # people can always --disable-shared, the test was removed, and we
+ # assume the GNU/Linux dynamic linker is in use.
+ dynamic_linker='GNU/Linux ld.so'
+ ;;
+
+netbsd*)
+ version_type=sunos
+ need_lib_prefix=no
+ need_version=no
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+ dynamic_linker='NetBSD (a.out) ld.so'
+ else
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ dynamic_linker='NetBSD ld.elf_so'
+ fi
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+
+newsos6)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ ;;
+
+*nto* | *qnx*)
+ version_type=qnx
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ dynamic_linker='ldqnx.so'
+ ;;
+
+openbsd*)
+ version_type=sunos
+ sys_lib_dlsearch_path_spec="/usr/lib"
+ need_lib_prefix=no
+ # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+ case $host_os in
+ openbsd3.3 | openbsd3.3.*) need_version=yes ;;
+ *) need_version=no ;;
+ esac
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ case $host_os in
+ openbsd2.[[89]] | openbsd2.[[89]].*)
+ shlibpath_overrides_runpath=no
+ ;;
+ *)
+ shlibpath_overrides_runpath=yes
+ ;;
+ esac
+ else
+ shlibpath_overrides_runpath=yes
+ fi
+ ;;
+
+os2*)
+ libname_spec='$name'
+ shrext_cmds=".dll"
+ need_lib_prefix=no
+ library_names_spec='$libname${shared_ext} $libname.a'
+ dynamic_linker='OS/2 ld.exe'
+ shlibpath_var=LIBPATH
+ ;;
+
+osf3* | osf4* | osf5*)
+ version_type=osf
+ need_lib_prefix=no
+ need_version=no
+ soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+ sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+ ;;
+
+rdos*)
+ dynamic_linker=no
+ ;;
+
+solaris*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ # ldd complains unless libraries are executable
+ postinstall_cmds='chmod +x $lib'
+ ;;
+
+sunos4*)
+ version_type=sunos
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ if test "$with_gnu_ld" = yes; then
+ need_lib_prefix=no
+ fi
+ need_version=yes
+ ;;
+
+sysv4 | sysv4.3*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ case $host_vendor in
+ sni)
+ shlibpath_overrides_runpath=no
+ need_lib_prefix=no
+ runpath_var=LD_RUN_PATH
+ ;;
+ siemens)
+ need_lib_prefix=no
+ ;;
+ motorola)
+ need_lib_prefix=no
+ need_version=no
+ shlibpath_overrides_runpath=no
+ sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+ ;;
+ esac
+ ;;
+
+sysv4*MP*)
+ if test -d /usr/nec ;then
+ version_type=linux # correct to gnu/linux during the next big refactor
+ library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
+ soname_spec='$libname${shared_ext}.$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ fi
+ ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+ version_type=freebsd-elf
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ if test "$with_gnu_ld" = yes; then
+ sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+ else
+ sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+ case $host_os in
+ sco3.2v5*)
+ sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+ ;;
+ esac
+ fi
+ sys_lib_dlsearch_path_spec='/usr/lib'
+ ;;
+
+tpf*)
+ # TPF is a cross-target only. Preferred cross-host = GNU/Linux.
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+
+uts4*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ ;;
+
+*)
+ dynamic_linker=no
+ ;;
+esac
+AC_MSG_RESULT([$dynamic_linker])
+test "$dynamic_linker" = no && can_build_shared=no
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
+ sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+fi
+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
+ sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+fi
+
+_LT_DECL([], [variables_saved_for_relink], [1],
+ [Variables whose values should be saved in libtool wrapper scripts and
+ restored at link time])
+_LT_DECL([], [need_lib_prefix], [0],
+ [Do we need the "lib" prefix for modules?])
+_LT_DECL([], [need_version], [0], [Do we need a version for libraries?])
+_LT_DECL([], [version_type], [0], [Library versioning type])
+_LT_DECL([], [runpath_var], [0], [Shared library runtime path variable])
+_LT_DECL([], [shlibpath_var], [0],[Shared library path variable])
+_LT_DECL([], [shlibpath_overrides_runpath], [0],
+ [Is shlibpath searched before the hard-coded library search path?])
+_LT_DECL([], [libname_spec], [1], [Format of library name prefix])
+_LT_DECL([], [library_names_spec], [1],
+ [[List of archive names. First name is the real one, the rest are links.
+ The last name is the one that the linker finds with -lNAME]])
+_LT_DECL([], [soname_spec], [1],
+ [[The coded name of the library, if different from the real name]])
+_LT_DECL([], [install_override_mode], [1],
+ [Permission mode override for installation of shared libraries])
+_LT_DECL([], [postinstall_cmds], [2],
+ [Command to use after installation of a shared archive])
+_LT_DECL([], [postuninstall_cmds], [2],
+ [Command to use after uninstallation of a shared archive])
+_LT_DECL([], [finish_cmds], [2],
+ [Commands used to finish a libtool library installation in a directory])
+_LT_DECL([], [finish_eval], [1],
+ [[As "finish_cmds", except a single script fragment to be evaled but
+ not shown]])
+_LT_DECL([], [hardcode_into_libs], [0],
+ [Whether we should hardcode library paths into libraries])
+_LT_DECL([], [sys_lib_search_path_spec], [2],
+ [Compile-time system search path for libraries])
+_LT_DECL([], [sys_lib_dlsearch_path_spec], [2],
+ [Run-time system search path for libraries])
+])# _LT_SYS_DYNAMIC_LINKER
+
+
+# _LT_PATH_TOOL_PREFIX(TOOL)
+# --------------------------
+# find a file program which can recognize shared library
+AC_DEFUN([_LT_PATH_TOOL_PREFIX],
+[m4_require([_LT_DECL_EGREP])dnl
+AC_MSG_CHECKING([for $1])
+AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
+[case $MAGIC_CMD in
+[[\\/*] | ?:[\\/]*])
+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+ ;;
+*)
+ lt_save_MAGIC_CMD="$MAGIC_CMD"
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+dnl $ac_dummy forces splitting on constant user-supplied paths.
+dnl POSIX.2 word splitting is done only on the output of word expansions,
+dnl not every word. This closes a longstanding sh security hole.
+ ac_dummy="m4_if([$2], , $PATH, [$2])"
+ for ac_dir in $ac_dummy; do
+ IFS="$lt_save_ifs"
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$1; then
+ lt_cv_path_MAGIC_CMD="$ac_dir/$1"
+ if test -n "$file_magic_test_file"; then
+ case $deplibs_check_method in
+ "file_magic "*)
+ file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+ MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+ $EGREP "$file_magic_regex" > /dev/null; then
+ :
+ else
+ cat <<_LT_EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such. This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem. Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool at gnu.org
+
+_LT_EOF
+ fi ;;
+ esac
+ fi
+ break
+ fi
+ done
+ IFS="$lt_save_ifs"
+ MAGIC_CMD="$lt_save_MAGIC_CMD"
+ ;;
+esac])
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+ AC_MSG_RESULT($MAGIC_CMD)
+else
+ AC_MSG_RESULT(no)
+fi
+_LT_DECL([], [MAGIC_CMD], [0],
+ [Used to examine libraries when file_magic_cmd begins with "file"])dnl
+])# _LT_PATH_TOOL_PREFIX
+
+# Old name:
+AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], [])
+
+
+# _LT_PATH_MAGIC
+# --------------
+# find a file program which can recognize a shared library
+m4_defun([_LT_PATH_MAGIC],
+[_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
+if test -z "$lt_cv_path_MAGIC_CMD"; then
+ if test -n "$ac_tool_prefix"; then
+ _LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
+ else
+ MAGIC_CMD=:
+ fi
+fi
+])# _LT_PATH_MAGIC
+
+
+# LT_PATH_LD
+# ----------
+# find the pathname to the GNU or non-GNU linker
+AC_DEFUN([LT_PATH_LD],
+[AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_PROG_ECHO_BACKSLASH])dnl
+
+AC_ARG_WITH([gnu-ld],
+ [AS_HELP_STRING([--with-gnu-ld],
+ [assume the C compiler uses GNU ld @<:@default=no@:>@])],
+ [test "$withval" = no || with_gnu_ld=yes],
+ [with_gnu_ld=no])dnl
+
+ac_prog=ld
+if test "$GCC" = yes; then
+ # Check if gcc -print-prog-name=ld gives a path.
+ AC_MSG_CHECKING([for ld used by $CC])
+ case $host in
+ *-*-mingw*)
+ # gcc leaves a trailing carriage return which upsets mingw
+ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+ *)
+ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+ esac
+ case $ac_prog in
+ # Accept absolute paths.
+ [[\\/]]* | ?:[[\\/]]*)
+ re_direlt='/[[^/]][[^/]]*/\.\./'
+ # Canonicalize the pathname of ld
+ ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
+ while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
+ ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
+ done
+ test -z "$LD" && LD="$ac_prog"
+ ;;
+ "")
+ # If it fails, then pretend we aren't using GCC.
+ ac_prog=ld
+ ;;
+ *)
+ # If it is relative, then search for the first ld in PATH.
+ with_gnu_ld=unknown
+ ;;
+ esac
+elif test "$with_gnu_ld" = yes; then
+ AC_MSG_CHECKING([for GNU ld])
+else
+ AC_MSG_CHECKING([for non-GNU ld])
+fi
+AC_CACHE_VAL(lt_cv_path_LD,
+[if test -z "$LD"; then
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ for ac_dir in $PATH; do
+ IFS="$lt_save_ifs"
+ test -z "$ac_dir" && ac_dir=.
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+ lt_cv_path_LD="$ac_dir/$ac_prog"
+ # Check to see if the program is GNU ld. I'd rather use --version,
+ # but apparently some variants of GNU ld only accept -v.
+ # Break only if it was the GNU/non-GNU ld that we prefer.
+ case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
+ *GNU* | *'with BFD'*)
+ test "$with_gnu_ld" != no && break
+ ;;
+ *)
+ test "$with_gnu_ld" != yes && break
+ ;;
+ esac
+ fi
+ done
+ IFS="$lt_save_ifs"
+else
+ lt_cv_path_LD="$LD" # Let the user override the test with a path.
+fi])
+LD="$lt_cv_path_LD"
+if test -n "$LD"; then
+ AC_MSG_RESULT($LD)
+else
+ AC_MSG_RESULT(no)
+fi
+test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
+_LT_PATH_LD_GNU
+AC_SUBST([LD])
+
+_LT_TAGDECL([], [LD], [1], [The linker used to build libraries])
+])# LT_PATH_LD
+
+# Old names:
+AU_ALIAS([AM_PROG_LD], [LT_PATH_LD])
+AU_ALIAS([AC_PROG_LD], [LT_PATH_LD])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_PROG_LD], [])
+dnl AC_DEFUN([AC_PROG_LD], [])
+
+
+# _LT_PATH_LD_GNU
+#- --------------
+m4_defun([_LT_PATH_LD_GNU],
+[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
+[# I'd rather use --version here, but apparently some GNU lds only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+ lt_cv_prog_gnu_ld=yes
+ ;;
+*)
+ lt_cv_prog_gnu_ld=no
+ ;;
+esac])
+with_gnu_ld=$lt_cv_prog_gnu_ld
+])# _LT_PATH_LD_GNU
+
+
+# _LT_CMD_RELOAD
+# --------------
+# find reload flag for linker
+# -- PORTME Some linkers may need a different reload flag.
+m4_defun([_LT_CMD_RELOAD],
+[AC_CACHE_CHECK([for $LD option to reload object files],
+ lt_cv_ld_reload_flag,
+ [lt_cv_ld_reload_flag='-r'])
+reload_flag=$lt_cv_ld_reload_flag
+case $reload_flag in
+"" | " "*) ;;
+*) reload_flag=" $reload_flag" ;;
+esac
+reload_cmds='$LD$reload_flag -o $output$reload_objs'
+case $host_os in
+ cygwin* | mingw* | pw32* | cegcc*)
+ if test "$GCC" != yes; then
+ reload_cmds=false
+ fi
+ ;;
+ darwin*)
+ if test "$GCC" = yes; then
+ reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+ else
+ reload_cmds='$LD$reload_flag -o $output$reload_objs'
+ fi
+ ;;
+esac
+_LT_TAGDECL([], [reload_flag], [1], [How to create reloadable object files])dnl
+_LT_TAGDECL([], [reload_cmds], [2])dnl
+])# _LT_CMD_RELOAD
+
+
+# _LT_CHECK_MAGIC_METHOD
+# ----------------------
+# how to check for library dependencies
+# -- PORTME fill in with the dynamic library characteristics
+m4_defun([_LT_CHECK_MAGIC_METHOD],
+[m4_require([_LT_DECL_EGREP])
+m4_require([_LT_DECL_OBJDUMP])
+AC_CACHE_CHECK([how to recognize dependent libraries],
+lt_cv_deplibs_check_method,
+[lt_cv_file_magic_cmd='$MAGIC_CMD'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# `unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [[regex]]' -- check by looking for files in library path
+# which responds to the $file_magic_cmd with a given extended regex.
+# If you have `file' or equivalent on your system and you're not sure
+# whether `pass_all' will *always* work, you probably want this one.
+
+case $host_os in
+aix[[4-9]]*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+beos*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+bsdi[[45]]*)
+ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
+ lt_cv_file_magic_cmd='/usr/bin/file -L'
+ lt_cv_file_magic_test_file=/shlib/libc.so
+ ;;
+
+cygwin*)
+ # func_win32_libid is a shell function defined in ltmain.sh
+ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+ lt_cv_file_magic_cmd='func_win32_libid'
+ ;;
+
+mingw* | pw32*)
+ # Base MSYS/MinGW do not provide the 'file' command needed by
+ # func_win32_libid shell function, so use a weaker test based on 'objdump',
+ # unless we find 'file', for example because we are cross-compiling.
+ # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin.
+ if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then
+ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+ lt_cv_file_magic_cmd='func_win32_libid'
+ else
+ # Keep this pattern in sync with the one in func_win32_libid.
+ lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)'
+ lt_cv_file_magic_cmd='$OBJDUMP -f'
+ fi
+ ;;
+
+cegcc*)
+ # use the weaker test based on 'objdump'. See mingw*.
+ lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
+ lt_cv_file_magic_cmd='$OBJDUMP -f'
+ ;;
+
+darwin* | rhapsody*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+freebsd* | dragonfly*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+ case $host_cpu in
+ i*86 )
+ # Not sure whether the presence of OpenBSD here was a mistake.
+ # Let's accept both of them until this is cleared up.
+ lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+ ;;
+ esac
+ else
+ lt_cv_deplibs_check_method=pass_all
+ fi
+ ;;
+
+gnu*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+haiku*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+hpux10.20* | hpux11*)
+ lt_cv_file_magic_cmd=/usr/bin/file
+ case $host_cpu in
+ ia64*)
+ lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
+ lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
+ ;;
+ hppa*64*)
+ [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]']
+ lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
+ ;;
+ *)
+ lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]]\.[[0-9]]) shared library'
+ lt_cv_file_magic_test_file=/usr/lib/libc.sl
+ ;;
+ esac
+ ;;
+
+interix[[3-9]]*)
+ # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
+ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$'
+ ;;
+
+irix5* | irix6* | nonstopux*)
+ case $LD in
+ *-32|*"-32 ") libmagic=32-bit;;
+ *-n32|*"-n32 ") libmagic=N32;;
+ *-64|*"-64 ") libmagic=64-bit;;
+ *) libmagic=never-match;;
+ esac
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+netbsd*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
+ else
+ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$'
+ fi
+ ;;
+
+newos6*)
+ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=/usr/lib/libnls.so
+ ;;
+
+*nto* | *qnx*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+openbsd*)
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$'
+ else
+ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
+ fi
+ ;;
+
+osf3* | osf4* | osf5*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+rdos*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+solaris*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+sysv4 | sysv4.3*)
+ case $host_vendor in
+ motorola)
+ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+ ;;
+ ncr)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ sequent)
+ lt_cv_file_magic_cmd='/bin/file'
+ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
+ ;;
+ sni)
+ lt_cv_file_magic_cmd='/bin/file'
+ lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
+ lt_cv_file_magic_test_file=/lib/libc.so
+ ;;
+ siemens)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ pc)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ esac
+ ;;
+
+tpf*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+esac
+])
+
+file_magic_glob=
+want_nocaseglob=no
+if test "$build" = "$host"; then
+ case $host_os in
+ mingw* | pw32*)
+ if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then
+ want_nocaseglob=yes
+ else
+ file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[[\1]]\/[[\1]]\/g;/g"`
+ fi
+ ;;
+ esac
+fi
+
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
+test -z "$deplibs_check_method" && deplibs_check_method=unknown
+
+_LT_DECL([], [deplibs_check_method], [1],
+ [Method to check whether dependent libraries are shared objects])
+_LT_DECL([], [file_magic_cmd], [1],
+ [Command to use when deplibs_check_method = "file_magic"])
+_LT_DECL([], [file_magic_glob], [1],
+ [How to find potential files when deplibs_check_method = "file_magic"])
+_LT_DECL([], [want_nocaseglob], [1],
+ [Find potential files using nocaseglob when deplibs_check_method = "file_magic"])
+])# _LT_CHECK_MAGIC_METHOD
+
+
+# LT_PATH_NM
+# ----------
+# find the pathname to a BSD- or MS-compatible name lister
+AC_DEFUN([LT_PATH_NM],
+[AC_REQUIRE([AC_PROG_CC])dnl
+AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM,
+[if test -n "$NM"; then
+ # Let the user override the test.
+ lt_cv_path_NM="$NM"
+else
+ lt_nm_to_check="${ac_tool_prefix}nm"
+ if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+ lt_nm_to_check="$lt_nm_to_check nm"
+ fi
+ for lt_tmp_nm in $lt_nm_to_check; do
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+ IFS="$lt_save_ifs"
+ test -z "$ac_dir" && ac_dir=.
+ tmp_nm="$ac_dir/$lt_tmp_nm"
+ if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+ # Check to see if the nm accepts a BSD-compat flag.
+ # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+ # nm: unknown option "B" ignored
+ # Tru64's nm complains that /dev/null is an invalid object file
+ case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
+ */dev/null* | *'Invalid file or object type'*)
+ lt_cv_path_NM="$tmp_nm -B"
+ break
+ ;;
+ *)
+ case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
+ */dev/null*)
+ lt_cv_path_NM="$tmp_nm -p"
+ break
+ ;;
+ *)
+ lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+ continue # so that we can try to find one that supports BSD flags
+ ;;
+ esac
+ ;;
+ esac
+ fi
+ done
+ IFS="$lt_save_ifs"
+ done
+ : ${lt_cv_path_NM=no}
+fi])
+if test "$lt_cv_path_NM" != "no"; then
+ NM="$lt_cv_path_NM"
+else
+ # Didn't find any BSD compatible name lister, look for dumpbin.
+ if test -n "$DUMPBIN"; then :
+ # Let the user override the test.
+ else
+ AC_CHECK_TOOLS(DUMPBIN, [dumpbin "link -dump"], :)
+ case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in
+ *COFF*)
+ DUMPBIN="$DUMPBIN -symbols"
+ ;;
+ *)
+ DUMPBIN=:
+ ;;
+ esac
+ fi
+ AC_SUBST([DUMPBIN])
+ if test "$DUMPBIN" != ":"; then
+ NM="$DUMPBIN"
+ fi
+fi
+test -z "$NM" && NM=nm
+AC_SUBST([NM])
+_LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl
+
+AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface],
+ [lt_cv_nm_interface="BSD nm"
+ echo "int some_variable = 0;" > conftest.$ac_ext
+ (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&AS_MESSAGE_LOG_FD)
+ (eval "$ac_compile" 2>conftest.err)
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD)
+ (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ (eval echo "\"\$as_me:$LINENO: output\"" >&AS_MESSAGE_LOG_FD)
+ cat conftest.out >&AS_MESSAGE_LOG_FD
+ if $GREP 'External.*some_variable' conftest.out > /dev/null; then
+ lt_cv_nm_interface="MS dumpbin"
+ fi
+ rm -f conftest*])
+])# LT_PATH_NM
+
+# Old names:
+AU_ALIAS([AM_PROG_NM], [LT_PATH_NM])
+AU_ALIAS([AC_PROG_NM], [LT_PATH_NM])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_PROG_NM], [])
+dnl AC_DEFUN([AC_PROG_NM], [])
+
+# _LT_CHECK_SHAREDLIB_FROM_LINKLIB
+# --------------------------------
+# how to determine the name of the shared library
+# associated with a specific link library.
+# -- PORTME fill in with the dynamic library characteristics
+m4_defun([_LT_CHECK_SHAREDLIB_FROM_LINKLIB],
+[m4_require([_LT_DECL_EGREP])
+m4_require([_LT_DECL_OBJDUMP])
+m4_require([_LT_DECL_DLLTOOL])
+AC_CACHE_CHECK([how to associate runtime and link libraries],
+lt_cv_sharedlib_from_linklib_cmd,
+[lt_cv_sharedlib_from_linklib_cmd='unknown'
+
+case $host_os in
+cygwin* | mingw* | pw32* | cegcc*)
+ # two different shell functions defined in ltmain.sh
+ # decide which to use based on capabilities of $DLLTOOL
+ case `$DLLTOOL --help 2>&1` in
+ *--identify-strict*)
+ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
+ ;;
+ *)
+ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback
+ ;;
+ esac
+ ;;
+*)
+ # fallback: assume linklib IS sharedlib
+ lt_cv_sharedlib_from_linklib_cmd="$ECHO"
+ ;;
+esac
+])
+sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd
+test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO
+
+_LT_DECL([], [sharedlib_from_linklib_cmd], [1],
+ [Command to associate shared and link libraries])
+])# _LT_CHECK_SHAREDLIB_FROM_LINKLIB
+
+
+# _LT_PATH_MANIFEST_TOOL
+# ----------------------
+# locate the manifest tool
+m4_defun([_LT_PATH_MANIFEST_TOOL],
+[AC_CHECK_TOOL(MANIFEST_TOOL, mt, :)
+test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt
+AC_CACHE_CHECK([if $MANIFEST_TOOL is a manifest tool], [lt_cv_path_mainfest_tool],
+ [lt_cv_path_mainfest_tool=no
+ echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&AS_MESSAGE_LOG_FD
+ $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ if $GREP 'Manifest Tool' conftest.out > /dev/null; then
+ lt_cv_path_mainfest_tool=yes
+ fi
+ rm -f conftest*])
+if test "x$lt_cv_path_mainfest_tool" != xyes; then
+ MANIFEST_TOOL=:
+fi
+_LT_DECL([], [MANIFEST_TOOL], [1], [Manifest tool])dnl
+])# _LT_PATH_MANIFEST_TOOL
+
+
+# LT_LIB_M
+# --------
+# check for math library
+AC_DEFUN([LT_LIB_M],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+LIBM=
+case $host in
+*-*-beos* | *-*-cegcc* | *-*-cygwin* | *-*-haiku* | *-*-pw32* | *-*-darwin*)
+ # These system don't have libm, or don't need it
+ ;;
+*-ncr-sysv4.3*)
+ AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
+ AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
+ ;;
+*)
+ AC_CHECK_LIB(m, cos, LIBM="-lm")
+ ;;
+esac
+AC_SUBST([LIBM])
+])# LT_LIB_M
+
+# Old name:
+AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_CHECK_LIBM], [])
+
+
+# _LT_COMPILER_NO_RTTI([TAGNAME])
+# -------------------------------
+m4_defun([_LT_COMPILER_NO_RTTI],
+[m4_require([_LT_TAG_COMPILER])dnl
+
+_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
+
+if test "$GCC" = yes; then
+ case $cc_basename in
+ nvcc*)
+ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -Xcompiler -fno-builtin' ;;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' ;;
+ esac
+
+ _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
+ lt_cv_prog_compiler_rtti_exceptions,
+ [-fno-rtti -fno-exceptions], [],
+ [_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
+fi
+_LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1],
+ [Compiler flag to turn off builtin functions])
+])# _LT_COMPILER_NO_RTTI
+
+
+# _LT_CMD_GLOBAL_SYMBOLS
+# ----------------------
+m4_defun([_LT_CMD_GLOBAL_SYMBOLS],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_PROG_AWK])dnl
+AC_REQUIRE([LT_PATH_NM])dnl
+AC_REQUIRE([LT_PATH_LD])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_TAG_COMPILER])dnl
+
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+AC_MSG_CHECKING([command to parse $NM output from $compiler object])
+AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe],
+[
+# These are sane defaults that work on at least a few old systems.
+# [They come from Ultrix. What could be older than Ultrix?!! ;)]
+
+# Character class describing NM global symbol codes.
+symcode='[[BCDEGRST]]'
+
+# Regexp to match symbols that can be accessed directly from C.
+sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
+
+# Define system-specific variables.
+case $host_os in
+aix*)
+ symcode='[[BCDT]]'
+ ;;
+cygwin* | mingw* | pw32* | cegcc*)
+ symcode='[[ABCDGISTW]]'
+ ;;
+hpux*)
+ if test "$host_cpu" = ia64; then
+ symcode='[[ABCDEGRST]]'
+ fi
+ ;;
+irix* | nonstopux*)
+ symcode='[[BCDEGRST]]'
+ ;;
+osf*)
+ symcode='[[BCDEGQRST]]'
+ ;;
+solaris*)
+ symcode='[[BDRT]]'
+ ;;
+sco3.2v5*)
+ symcode='[[DT]]'
+ ;;
+sysv4.2uw2*)
+ symcode='[[DT]]'
+ ;;
+sysv5* | sco5v6* | unixware* | OpenUNIX*)
+ symcode='[[ABDT]]'
+ ;;
+sysv4)
+ symcode='[[DFNSTU]]'
+ ;;
+esac
+
+# If we're using GNU nm, then use its standard symbol codes.
+case `$NM -V 2>&1` in
+*GNU* | *'with BFD'*)
+ symcode='[[ABCDGIRSTW]]' ;;
+esac
+
+# Transform an extracted symbol line into a proper C declaration.
+# Some systems (esp. on ia64) link data and code symbols differently,
+# so use this general approach.
+lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+
+# Transform an extracted symbol line into symbol name and symbol address
+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"lib\2\", (void *) \&\2},/p'"
+
+# Handle CRLF in mingw tool chain
+opt_cr=
+case $build_os in
+mingw*)
+ opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+ ;;
+esac
+
+# Try without a prefix underscore, then with it.
+for ac_symprfx in "" "_"; do
+
+ # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
+ symxfrm="\\1 $ac_symprfx\\2 \\2"
+
+ # Write the raw and C identifiers.
+ if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+ # Fake it for dumpbin and say T for any non-static function
+ # and D for any global variable.
+ # Also find C++ and __fastcall symbols from MSVC++,
+ # which start with @ or ?.
+ lt_cv_sys_global_symbol_pipe="$AWK ['"\
+" {last_section=section; section=\$ 3};"\
+" /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\
+" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
+" \$ 0!~/External *\|/{next};"\
+" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
+" {if(hide[section]) next};"\
+" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
+" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
+" s[1]~/^[@?]/{print s[1], s[1]; next};"\
+" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
+" ' prfx=^$ac_symprfx]"
+ else
+ lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+ fi
+ lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'"
+
+ # Check to see that the pipe works correctly.
+ pipe_works=no
+
+ rm -f conftest*
+ cat > conftest.$ac_ext <<_LT_EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(void);
+void nm_test_func(void){}
+#ifdef __cplusplus
+}
+#endif
+int main(){nm_test_var='a';nm_test_func();return(0);}
+_LT_EOF
+
+ if AC_TRY_EVAL(ac_compile); then
+ # Now try to grab the symbols.
+ nlist=conftest.nm
+ if AC_TRY_EVAL(NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) && test -s "$nlist"; then
+ # Try sorting and uniquifying the output.
+ if sort "$nlist" | uniq > "$nlist"T; then
+ mv -f "$nlist"T "$nlist"
+ else
+ rm -f "$nlist"T
+ fi
+
+ # Make sure that we snagged all the symbols we need.
+ if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
+ if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
+ cat <<_LT_EOF > conftest.$ac_ext
+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */
+#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
+/* DATA imports from DLLs on WIN32 con't be const, because runtime
+ relocations are performed -- see ld's documentation on pseudo-relocs. */
+# define LT@&t at _DLSYM_CONST
+#elif defined(__osf__)
+/* This system does not cope well with relocations in const data. */
+# define LT@&t at _DLSYM_CONST
+#else
+# define LT@&t at _DLSYM_CONST const
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+_LT_EOF
+ # Now generate the symbol file.
+ eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
+
+ cat <<_LT_EOF >> conftest.$ac_ext
+
+/* The mapping between symbol names and symbols. */
+LT@&t at _DLSYM_CONST struct {
+ const char *name;
+ void *address;
+}
+lt__PROGRAM__LTX_preloaded_symbols[[]] =
+{
+ { "@PROGRAM@", (void *) 0 },
+_LT_EOF
+ $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
+ cat <<\_LT_EOF >> conftest.$ac_ext
+ {0, (void *) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+ return lt__PROGRAM__LTX_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+_LT_EOF
+ # Now try linking the two files.
+ mv conftest.$ac_objext conftstm.$ac_objext
+ lt_globsym_save_LIBS=$LIBS
+ lt_globsym_save_CFLAGS=$CFLAGS
+ LIBS="conftstm.$ac_objext"
+ CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
+ if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
+ pipe_works=yes
+ fi
+ LIBS=$lt_globsym_save_LIBS
+ CFLAGS=$lt_globsym_save_CFLAGS
+ else
+ echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
+ fi
+ else
+ echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD
+ fi
+ else
+ echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD
+ fi
+ else
+ echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
+ cat conftest.$ac_ext >&5
+ fi
+ rm -rf conftest* conftst*
+
+ # Do not use the global_symbol_pipe unless it works.
+ if test "$pipe_works" = yes; then
+ break
+ else
+ lt_cv_sys_global_symbol_pipe=
+ fi
+done
+])
+if test -z "$lt_cv_sys_global_symbol_pipe"; then
+ lt_cv_sys_global_symbol_to_cdecl=
+fi
+if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
+ AC_MSG_RESULT(failed)
+else
+ AC_MSG_RESULT(ok)
+fi
+
+# Response file support.
+if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+ nm_file_list_spec='@'
+elif $NM --help 2>/dev/null | grep '[[@]]FILE' >/dev/null; then
+ nm_file_list_spec='@'
+fi
+
+_LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1],
+ [Take the output of nm and produce a listing of raw symbols and C names])
+_LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1],
+ [Transform the output of nm in a proper C declaration])
+_LT_DECL([global_symbol_to_c_name_address],
+ [lt_cv_sys_global_symbol_to_c_name_address], [1],
+ [Transform the output of nm in a C name address pair])
+_LT_DECL([global_symbol_to_c_name_address_lib_prefix],
+ [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1],
+ [Transform the output of nm in a C name address pair when lib prefix is needed])
+_LT_DECL([], [nm_file_list_spec], [1],
+ [Specify filename containing input files for $NM])
+]) # _LT_CMD_GLOBAL_SYMBOLS
+
+
+# _LT_COMPILER_PIC([TAGNAME])
+# ---------------------------
+m4_defun([_LT_COMPILER_PIC],
+[m4_require([_LT_TAG_COMPILER])dnl
+_LT_TAGVAR(lt_prog_compiler_wl, $1)=
+_LT_TAGVAR(lt_prog_compiler_pic, $1)=
+_LT_TAGVAR(lt_prog_compiler_static, $1)=
+
+m4_if([$1], [CXX], [
+ # C++ specific cases for pic, static, wl, etc.
+ if test "$GXX" = yes; then
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+
+ case $host_os in
+ aix*)
+ # All AIX code is PIC.
+ if test "$host_cpu" = ia64; then
+ # AIX 5 now supports IA64 processor
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ fi
+ ;;
+
+ amigaos*)
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+ m68k)
+ # FIXME: we need at least 68020 code to build shared libraries, but
+ # adding the `-m68020' flag to GCC prevents building anything better,
+ # like `-m68040'.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
+ ;;
+ esac
+ ;;
+
+ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+ # PIC is the default for these OSes.
+ ;;
+ mingw* | cygwin* | os2* | pw32* | cegcc*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ # Although the cygwin gcc ignores -fPIC, still need this for old-style
+ # (--disable-auto-import) libraries
+ m4_if([$1], [GCJ], [],
+ [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+ ;;
+ darwin* | rhapsody*)
+ # PIC is the default on this platform
+ # Common symbols not allowed in MH_DYLIB files
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+ ;;
+ *djgpp*)
+ # DJGPP does not support shared libraries at all
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+ ;;
+ haiku*)
+ # PIC is the default for Haiku.
+ # The "-static" flag exists, but is broken.
+ _LT_TAGVAR(lt_prog_compiler_static, $1)=
+ ;;
+ interix[[3-9]]*)
+ # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+ # Instead, we relocate shared libraries at runtime.
+ ;;
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
+ fi
+ ;;
+ hpux*)
+ # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+ # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag
+ # sets the default TLS model and affects inlining.
+ case $host_cpu in
+ hppa*64*)
+ ;;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+ esac
+ ;;
+ *qnx* | *nto*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+ ;;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+ esac
+ else
+ case $host_os in
+ aix[[4-9]]*)
+ # All AIX code is PIC.
+ if test "$host_cpu" = ia64; then
+ # AIX 5 now supports IA64 processor
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ else
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
+ fi
+ ;;
+ chorus*)
+ case $cc_basename in
+ cxch68*)
+ # Green Hills C++ Compiler
+ # _LT_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
+ ;;
+ esac
+ ;;
+ mingw* | cygwin* | os2* | pw32* | cegcc*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ m4_if([$1], [GCJ], [],
+ [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+ ;;
+ dgux*)
+ case $cc_basename in
+ ec++*)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ ;;
+ ghcx*)
+ # Green Hills C++ Compiler
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ freebsd* | dragonfly*)
+ # FreeBSD uses GNU C++
+ ;;
+ hpux9* | hpux10* | hpux11*)
+ case $cc_basename in
+ CC*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+ if test "$host_cpu" != ia64; then
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+ fi
+ ;;
+ aCC*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+ case $host_cpu in
+ hppa*64*|ia64*)
+ # +Z the default
+ ;;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+ ;;
+ esac
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ interix*)
+ # This is c89, which is MS Visual C++ (no shared libs)
+ # Anyone wants to do a port?
+ ;;
+ irix5* | irix6* | nonstopux*)
+ case $cc_basename in
+ CC*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ # CC pic flag -KPIC is the default.
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ case $cc_basename in
+ KCC*)
+ # KAI C++ Compiler
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+ ecpc* )
+ # old Intel C++ for x86_64 which still supported -KPIC.
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+ ;;
+ icpc* )
+ # Intel C++, used to be incompatible with GCC.
+ # ICC 10 doesn't accept -KPIC any more.
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+ ;;
+ pgCC* | pgcpp*)
+ # Portland Group C++ compiler
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+ cxx*)
+ # Compaq C++
+ # Make sure the PIC flag is empty. It appears that all Alpha
+ # Linux and Compaq Tru64 Unix objects are PIC.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ ;;
+ xlc* | xlC* | bgxl[[cC]]* | mpixl[[cC]]*)
+ # IBM XL 8.0, 9.0 on PPC and BlueGene
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
+ ;;
+ *)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*)
+ # Sun C++ 5.9
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+ lynxos*)
+ ;;
+ m88k*)
+ ;;
+ mvs*)
+ case $cc_basename in
+ cxx*)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ netbsd*)
+ ;;
+ *qnx* | *nto*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+ ;;
+ osf3* | osf4* | osf5*)
+ case $cc_basename in
+ KCC*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
+ ;;
+ RCC*)
+ # Rational C++ 2.4.1
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+ ;;
+ cxx*)
+ # Digital/Compaq C++
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ # Make sure the PIC flag is empty. It appears that all Alpha
+ # Linux and Compaq Tru64 Unix objects are PIC.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ psos*)
+ ;;
+ solaris*)
+ case $cc_basename in
+ CC* | sunCC*)
+ # Sun C++ 4.2, 5.x and Centerline C++
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+ ;;
+ gcx*)
+ # Green Hills C++ Compiler
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ sunos4*)
+ case $cc_basename in
+ CC*)
+ # Sun C++ 4.x
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+ lcc*)
+ # Lucid
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+ case $cc_basename in
+ CC*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+ esac
+ ;;
+ tandem*)
+ case $cc_basename in
+ NCC*)
+ # NonStop-UX NCC 3.20
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ vxworks*)
+ ;;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+ ;;
+ esac
+ fi
+],
+[
+ if test "$GCC" = yes; then
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+
+ case $host_os in
+ aix*)
+ # All AIX code is PIC.
+ if test "$host_cpu" = ia64; then
+ # AIX 5 now supports IA64 processor
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ fi
+ ;;
+
+ amigaos*)
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+ m68k)
+ # FIXME: we need at least 68020 code to build shared libraries, but
+ # adding the `-m68020' flag to GCC prevents building anything better,
+ # like `-m68040'.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
+ ;;
+ esac
+ ;;
+
+ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+ # PIC is the default for these OSes.
+ ;;
+
+ mingw* | cygwin* | pw32* | os2* | cegcc*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ # Although the cygwin gcc ignores -fPIC, still need this for old-style
+ # (--disable-auto-import) libraries
+ m4_if([$1], [GCJ], [],
+ [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+ ;;
+
+ darwin* | rhapsody*)
+ # PIC is the default on this platform
+ # Common symbols not allowed in MH_DYLIB files
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+ ;;
+
+ haiku*)
+ # PIC is the default for Haiku.
+ # The "-static" flag exists, but is broken.
+ _LT_TAGVAR(lt_prog_compiler_static, $1)=
+ ;;
+
+ hpux*)
+ # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+ # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag
+ # sets the default TLS model and affects inlining.
+ case $host_cpu in
+ hppa*64*)
+ # +Z the default
+ ;;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+ esac
+ ;;
+
+ interix[[3-9]]*)
+ # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+ # Instead, we relocate shared libraries at runtime.
+ ;;
+
+ msdosdjgpp*)
+ # Just because we use GCC doesn't mean we suddenly get shared libraries
+ # on systems that don't support them.
+ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+ enable_shared=no
+ ;;
+
+ *nto* | *qnx*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+ ;;
+
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
+ fi
+ ;;
+
+ *)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+ esac
+
+ case $cc_basename in
+ nvcc*) # Cuda Compiler Driver 2.2
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Xlinker '
+ if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)="-Xcompiler $_LT_TAGVAR(lt_prog_compiler_pic, $1)"
+ fi
+ ;;
+ esac
+ else
+ # PORTME Check for flag to pass linker flags through the system compiler.
+ case $host_os in
+ aix*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ if test "$host_cpu" = ia64; then
+ # AIX 5 now supports IA64 processor
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ else
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
+ fi
+ ;;
+
+ mingw* | cygwin* | pw32* | os2* | cegcc*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ m4_if([$1], [GCJ], [],
+ [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+ ;;
+
+ hpux9* | hpux10* | hpux11*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+ # not for PA HP-UX.
+ case $host_cpu in
+ hppa*64*|ia64*)
+ # +Z the default
+ ;;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+ ;;
+ esac
+ # Is there a better lt_prog_compiler_static that works with the bundled CC?
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+ ;;
+
+ irix5* | irix6* | nonstopux*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ # PIC (with -KPIC) is the default.
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ ;;
+
+ linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ case $cc_basename in
+ # old Intel for x86_64 which still supported -KPIC.
+ ecc*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+ ;;
+ # icc used to be incompatible with GCC.
+ # ICC 10 doesn't accept -KPIC any more.
+ icc* | ifort*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+ ;;
+ # Lahey Fortran 8.1.
+ lf95*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='--static'
+ ;;
+ nagfor*)
+ # NAG Fortran compiler
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+ pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
+ # Portland Group compilers (*not* the Pentium gcc compiler,
+ # which looks to be a dead project)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+ ccc*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ # All Alpha code is PIC.
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ ;;
+ xl* | bgxl* | bgf* | mpixl*)
+ # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
+ ;;
+ *)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [[1-7]].* | *Sun*Fortran*\ 8.[[0-3]]*)
+ # Sun Fortran 8.3 passes all unrecognized flags to the linker
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)=''
+ ;;
+ *Sun\ F* | *Sun*Fortran*)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+ ;;
+ *Sun\ C*)
+ # Sun C 5.9
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ ;;
+ *Intel*\ [[CF]]*Compiler*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+ ;;
+ *Portland\ Group*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+
+ newsos6)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+
+ *nto* | *qnx*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+ ;;
+
+ osf3* | osf4* | osf5*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ # All OSF/1 code is PIC.
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ ;;
+
+ rdos*)
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ ;;
+
+ solaris*)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ case $cc_basename in
+ f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
+ esac
+ ;;
+
+ sunos4*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+
+ sysv4 | sysv4.2uw2* | sysv4.3*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+
+ sysv4*MP*)
+ if test -d /usr/nec ;then
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ fi
+ ;;
+
+ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+
+ unicos*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+ ;;
+
+ uts4*)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+
+ *)
+ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+ ;;
+ esac
+ fi
+])
+case $host_os in
+ # For platforms which do not support PIC, -DPIC is meaningless:
+ *djgpp*)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+ ;;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t at m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])"
+ ;;
+esac
+
+AC_CACHE_CHECK([for $compiler option to produce PIC],
+ [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)],
+ [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_prog_compiler_pic, $1)])
+_LT_TAGVAR(lt_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then
+ _LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, $1) works],
+ [_LT_TAGVAR(lt_cv_prog_compiler_pic_works, $1)],
+ [$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t at m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [],
+ [case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in
+ "" | " "*) ;;
+ *) _LT_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_TAGVAR(lt_prog_compiler_pic, $1)" ;;
+ esac],
+ [_LT_TAGVAR(lt_prog_compiler_pic, $1)=
+ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
+fi
+_LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1],
+ [Additional compiler flags for building library objects])
+
+_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1],
+ [How to pass a linker flag through the compiler])
+#
+# Check to make sure the static flag actually works.
+#
+wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\"
+_LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works],
+ _LT_TAGVAR(lt_cv_prog_compiler_static_works, $1),
+ $lt_tmp_static_flag,
+ [],
+ [_LT_TAGVAR(lt_prog_compiler_static, $1)=])
+_LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1],
+ [Compiler flag to prevent dynamic linking])
+])# _LT_COMPILER_PIC
+
+
+# _LT_LINKER_SHLIBS([TAGNAME])
+# ----------------------------
+# See if the linker supports building shared libraries.
+m4_defun([_LT_LINKER_SHLIBS],
+[AC_REQUIRE([LT_PATH_LD])dnl
+AC_REQUIRE([LT_PATH_NM])dnl
+m4_require([_LT_PATH_MANIFEST_TOOL])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
+m4_require([_LT_TAG_COMPILER])dnl
+AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
+m4_if([$1], [CXX], [
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+ _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
+ case $host_os in
+ aix[[4-9]]*)
+ # If we're using GNU nm, then we don't want the "-C" option.
+ # -C means demangle to AIX nm, but means don't demangle with GNU nm
+ # Also, AIX nm treats weak defined symbols like other global defined
+ # symbols, whereas GNU nm marks them as "W".
+ if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ else
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ fi
+ ;;
+ pw32*)
+ _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
+ ;;
+ cygwin* | mingw* | cegcc*)
+ case $cc_basename in
+ cl*)
+ _LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
+ ;;
+ *)
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
+ _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname']
+ ;;
+ esac
+ ;;
+ *)
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+ ;;
+ esac
+], [
+ runpath_var=
+ _LT_TAGVAR(allow_undefined_flag, $1)=
+ _LT_TAGVAR(always_export_symbols, $1)=no
+ _LT_TAGVAR(archive_cmds, $1)=
+ _LT_TAGVAR(archive_expsym_cmds, $1)=
+ _LT_TAGVAR(compiler_needs_object, $1)=no
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)=
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+ _LT_TAGVAR(hardcode_automatic, $1)=no
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=no
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=
+ _LT_TAGVAR(hardcode_minus_L, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+ _LT_TAGVAR(inherit_rpath, $1)=no
+ _LT_TAGVAR(link_all_deplibs, $1)=unknown
+ _LT_TAGVAR(module_cmds, $1)=
+ _LT_TAGVAR(module_expsym_cmds, $1)=
+ _LT_TAGVAR(old_archive_from_new_cmds, $1)=
+ _LT_TAGVAR(old_archive_from_expsyms_cmds, $1)=
+ _LT_TAGVAR(thread_safe_flag_spec, $1)=
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=
+ # include_expsyms should be a list of space-separated symbols to be *always*
+ # included in the symbol list
+ _LT_TAGVAR(include_expsyms, $1)=
+ # exclude_expsyms can be an extended regexp of symbols to exclude
+ # it will be wrapped by ` (' and `)$', so one must not match beginning or
+ # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
+ # as well as any symbol that contains `d'.
+ _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
+ # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+ # platforms (ab)use it in PIC code, but their linkers get confused if
+ # the symbol is explicitly referenced. Since portable code cannot
+ # rely on this symbol name, it's probably fine to never include it in
+ # preloaded symbol tables.
+ # Exclude shared library initialization/finalization symbols.
+dnl Note also adjust exclude_expsyms for C++ above.
+ extract_expsyms_cmds=
+
+ case $host_os in
+ cygwin* | mingw* | pw32* | cegcc*)
+ # FIXME: the MSVC++ port hasn't been tested in a loooong time
+ # When not using gcc, we currently assume that we are using
+ # Microsoft Visual C++.
+ if test "$GCC" != yes; then
+ with_gnu_ld=no
+ fi
+ ;;
+ interix*)
+ # we just hope/assume this is gcc and not c89 (= MSVC++)
+ with_gnu_ld=yes
+ ;;
+ openbsd*)
+ with_gnu_ld=no
+ ;;
+ esac
+
+ _LT_TAGVAR(ld_shlibs, $1)=yes
+
+ # On some targets, GNU ld is compatible enough with the native linker
+ # that we're better off using the native interface for both.
+ lt_use_gnu_ld_interface=no
+ if test "$with_gnu_ld" = yes; then
+ case $host_os in
+ aix*)
+ # The AIX port of GNU ld has always aspired to compatibility
+ # with the native linker. However, as the warning in the GNU ld
+ # block says, versions before 2.19.5* couldn't really create working
+ # shared libraries, regardless of the interface used.
+ case `$LD -v 2>&1` in
+ *\ \(GNU\ Binutils\)\ 2.19.5*) ;;
+ *\ \(GNU\ Binutils\)\ 2.[[2-9]]*) ;;
+ *\ \(GNU\ Binutils\)\ [[3-9]]*) ;;
+ *)
+ lt_use_gnu_ld_interface=yes
+ ;;
+ esac
+ ;;
+ *)
+ lt_use_gnu_ld_interface=yes
+ ;;
+ esac
+ fi
+
+ if test "$lt_use_gnu_ld_interface" = yes; then
+ # If archive_cmds runs LD, not CC, wlarc should be empty
+ wlarc='${wl}'
+
+ # Set some defaults for GNU ld with shared library support. These
+ # are reset later if shared libraries are not supported. Putting them
+ # here allows them to be overridden if necessary.
+ runpath_var=LD_RUN_PATH
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+ # ancient GNU ld didn't support --whole-archive et. al.
+ if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
+ _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ else
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=
+ fi
+ supports_anon_versioning=no
+ case `$LD -v 2>&1` in
+ *GNU\ gold*) supports_anon_versioning=yes ;;
+ *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
+ *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+ *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+ *\ 2.11.*) ;; # other 2.11 versions
+ *) supports_anon_versioning=yes ;;
+ esac
+
+ # See if GNU ld supports shared libraries.
+ case $host_os in
+ aix[[3-9]]*)
+ # On AIX/PPC, the GNU linker is very broken
+ if test "$host_cpu" != ia64; then
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ cat <<_LT_EOF 1>&2
+
+*** Warning: the GNU linker, at least up to release 2.19, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support. If you
+*** really care for shared libraries, you may want to install binutils
+*** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
+*** You will then need to restart the configuration process.
+
+_LT_EOF
+ fi
+ ;;
+
+ amigaos*)
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)=''
+ ;;
+ m68k)
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ ;;
+ esac
+ ;;
+
+ beos*)
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ # Joseph Beckenbach <jrb3 at best.com> says some releases of gcc
+ # support --undefined. This deserves some investigation. FIXME
+ _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+
+ cygwin* | mingw* | pw32* | cegcc*)
+ # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+ # as there is no search path for DLLs.
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols'
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_TAGVAR(always_export_symbols, $1)=no
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
+ _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname']
+
+ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ # If the export-symbols file already is a .def file (1st line
+ # is EXPORTS), use it as is; otherwise, prepend...
+ _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+ cp $export_symbols $output_objdir/$soname.def;
+ else
+ echo EXPORTS > $output_objdir/$soname.def;
+ cat $export_symbols >> $output_objdir/$soname.def;
+ fi~
+ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+
+ haiku*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ ;;
+
+ interix[[3-9]]*)
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+ # Instead, shared libraries are loaded at an image base (0x10000000 by
+ # default) and relocated if they conflict, which is a slow very memory
+ # consuming and fragmenting process. To avoid this, we pick a random,
+ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+ # time. Moving up from 0x10000000 also allows more sbrk(2) space.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ ;;
+
+ gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
+ tmp_diet=no
+ if test "$host_os" = linux-dietlibc; then
+ case $cc_basename in
+ diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn)
+ esac
+ fi
+ if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
+ && test "$tmp_diet" = no
+ then
+ tmp_addflag=' $pic_flag'
+ tmp_sharedflag='-shared'
+ case $cc_basename,$host_cpu in
+ pgcc*) # Portland Group C compiler
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ tmp_addflag=' $pic_flag'
+ ;;
+ pgf77* | pgf90* | pgf95* | pgfortran*)
+ # Portland Group f77 and f90 compilers
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ tmp_addflag=' $pic_flag -Mnomain' ;;
+ ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
+ tmp_addflag=' -i_dynamic' ;;
+ efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64
+ tmp_addflag=' -i_dynamic -nofor_main' ;;
+ ifc* | ifort*) # Intel Fortran compiler
+ tmp_addflag=' -nofor_main' ;;
+ lf95*) # Lahey Fortran 8.1
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=
+ tmp_sharedflag='--shared' ;;
+ xl[[cC]]* | bgxl[[cC]]* | mpixl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below)
+ tmp_sharedflag='-qmkshrobj'
+ tmp_addflag= ;;
+ nvcc*) # Cuda Compiler Driver 2.2
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ _LT_TAGVAR(compiler_needs_object, $1)=yes
+ ;;
+ esac
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*) # Sun C 5.9
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ _LT_TAGVAR(compiler_needs_object, $1)=yes
+ tmp_sharedflag='-G' ;;
+ *Sun\ F*) # Sun Fortran 8.3
+ tmp_sharedflag='-G' ;;
+ esac
+ _LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+
+ if test "x$supports_anon_versioning" = xyes; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+ fi
+
+ case $cc_basename in
+ xlf* | bgf* | bgxlf* | mpixlf*)
+ # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
+ if test "x$supports_anon_versioning" = xyes; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+ fi
+ ;;
+ esac
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+
+ netbsd*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+ wlarc=
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ fi
+ ;;
+
+ solaris*)
+ if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ cat <<_LT_EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems. Therefore, libtool
+*** is disabling shared libraries support. We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer. Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+ elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+
+ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+ case `$LD -v 2>&1` in
+ *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*)
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ cat <<_LT_EOF 1>&2
+
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** reliably create shared libraries on SCO systems. Therefore, libtool
+*** is disabling shared libraries support. We urge you to upgrade GNU
+*** binutils to release 2.16.91.0.3 or newer. Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+ ;;
+ *)
+ # For security reasons, it is highly recommended that you always
+ # use absolute paths for naming shared libraries, and exclude the
+ # DT_RUNPATH tag from executables and libraries. But doing so
+ # requires that you compile everything twice, which is a pain.
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+ esac
+ ;;
+
+ sunos4*)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ wlarc=
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ *)
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+ esac
+
+ if test "$_LT_TAGVAR(ld_shlibs, $1)" = no; then
+ runpath_var=
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)=
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=
+ fi
+ else
+ # PORTME fill in a description of your system's linker (not GNU ld)
+ case $host_os in
+ aix3*)
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_TAGVAR(always_export_symbols, $1)=yes
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+ # Note: this linker hardcodes the directories in LIBPATH if there
+ # are no directories specified by -L.
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+ # Neither direct hardcoding nor static linking is supported with a
+ # broken collect2.
+ _LT_TAGVAR(hardcode_direct, $1)=unsupported
+ fi
+ ;;
+
+ aix[[4-9]]*)
+ if test "$host_cpu" = ia64; then
+ # On IA64, the linker does run time linking by default, so we don't
+ # have to do anything special.
+ aix_use_runtimelinking=no
+ exp_sym_flag='-Bexport'
+ no_entry_flag=""
+ else
+ # If we're using GNU nm, then we don't want the "-C" option.
+ # -C means demangle to AIX nm, but means don't demangle with GNU nm
+ # Also, AIX nm treats weak defined symbols like other global
+ # defined symbols, whereas GNU nm marks them as "W".
+ if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ else
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ fi
+ aix_use_runtimelinking=no
+
+ # Test if we are trying to use run time linking or normal
+ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+ # need to do runtime linking.
+ case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
+ for ld_flag in $LDFLAGS; do
+ if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+ aix_use_runtimelinking=yes
+ break
+ fi
+ done
+ ;;
+ esac
+
+ exp_sym_flag='-bexport'
+ no_entry_flag='-bnoentry'
+ fi
+
+ # When large executables or shared objects are built, AIX ld can
+ # have problems creating the table of contents. If linking a library
+ # or program results in "error TOC overflow" add -mminimal-toc to
+ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
+ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+ _LT_TAGVAR(archive_cmds, $1)=''
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
+
+ if test "$GCC" = yes; then
+ case $host_os in aix4.[[012]]|aix4.[[012]].*)
+ # We only want to do this on AIX 4.2 and lower, the check
+ # below for broken collect2 doesn't work under 4.3+
+ collect2name=`${CC} -print-prog-name=collect2`
+ if test -f "$collect2name" &&
+ strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+ then
+ # We have reworked collect2
+ :
+ else
+ # We have old collect2
+ _LT_TAGVAR(hardcode_direct, $1)=unsupported
+ # It fails to find uninstalled libraries when the uninstalled
+ # path is not listed in the libpath. Setting hardcode_minus_L
+ # to unsupported forces relinking
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=
+ fi
+ ;;
+ esac
+ shared_flag='-shared'
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag="$shared_flag "'${wl}-G'
+ fi
+ else
+ # not using gcc
+ if test "$host_cpu" = ia64; then
+ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+ # chokes on -Wl,-G. The following line is correct:
+ shared_flag='-G'
+ else
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag='${wl}-G'
+ else
+ shared_flag='${wl}-bM:SRE'
+ fi
+ fi
+ fi
+
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
+ # It seems that -bexpall does not export symbols beginning with
+ # underscore (_), so it is better to generate a list of symbols to export.
+ _LT_TAGVAR(always_export_symbols, $1)=yes
+ if test "$aix_use_runtimelinking" = yes; then
+ # Warning - without using the other runtime loading flags (-brtl),
+ # -berok will link without error, but may produce a broken library.
+ _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+ _LT_SYS_MODULE_PATH_AIX([$1])
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ else
+ if test "$host_cpu" = ia64; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+ _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
+ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+ else
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+ _LT_SYS_MODULE_PATH_AIX([$1])
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+ # Warning - without using the other run time loading flags,
+ # -berok will link without error, but may produce a broken library.
+ _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
+ if test "$with_gnu_ld" = yes; then
+ # We only use this code for GNU lds that support --whole-archive.
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+ else
+ # Exported symbols can be pulled into shared objects from archives
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+ fi
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+ # This is similar to how AIX traditionally builds its shared libraries.
+ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+ fi
+ fi
+ ;;
+
+ amigaos*)
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)=''
+ ;;
+ m68k)
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ ;;
+ esac
+ ;;
+
+ bsdi[[45]]*)
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
+ ;;
+
+ cygwin* | mingw* | pw32* | cegcc*)
+ # When not using gcc, we currently assume that we are using
+ # Microsoft Visual C++.
+ # hardcode_libdir_flag_spec is actually meaningless, as there is
+ # no search path for DLLs.
+ case $cc_basename in
+ cl*)
+ # Native MSVC
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_TAGVAR(always_export_symbols, $1)=yes
+ _LT_TAGVAR(file_list_spec, $1)='@'
+ # Tell ltmain to make .lib files, not .a files.
+ libext=lib
+ # Tell ltmain to make .dll files, not .so files.
+ shrext_cmds=".dll"
+ # FIXME: Setting linknames here is a bad hack.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
+ _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+ sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
+ else
+ sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
+ fi~
+ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+ linknames='
+ # The linker will not automatically build a static lib if we build a DLL.
+ # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+ _LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1,DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
+ # Don't use ranlib
+ _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
+ _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
+ lt_tool_outputfile="@TOOL_OUTPUT@"~
+ case $lt_outputfile in
+ *.exe|*.EXE) ;;
+ *)
+ lt_outputfile="$lt_outputfile.exe"
+ lt_tool_outputfile="$lt_tool_outputfile.exe"
+ ;;
+ esac~
+ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
+ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+ $RM "$lt_outputfile.manifest";
+ fi'
+ ;;
+ *)
+ # Assume MSVC wrapper
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ # Tell ltmain to make .lib files, not .a files.
+ libext=lib
+ # Tell ltmain to make .dll files, not .so files.
+ shrext_cmds=".dll"
+ # FIXME: Setting linknames here is a bad hack.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
+ # The linker will automatically build a .lib file if we build a DLL.
+ _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
+ # FIXME: Should let the user specify the lib program.
+ _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+ ;;
+ esac
+ ;;
+
+ darwin* | rhapsody*)
+ _LT_DARWIN_LINKER_FEATURES($1)
+ ;;
+
+ dgux*)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+ # support. Future versions do this automatically, but an explicit c++rt0.o
+ # does not break anything, and helps significantly (at the cost of a little
+ # extra space).
+ freebsd2.2*)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+ freebsd2.*)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+ freebsd* | dragonfly*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ hpux9*)
+ if test "$GCC" = yes; then
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ fi
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ ;;
+
+ hpux10*)
+ if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+ fi
+ if test "$with_gnu_ld" = no; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ fi
+ ;;
+
+ hpux11*)
+ if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+ case $host_cpu in
+ hppa*64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ ia64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ else
+ case $host_cpu in
+ hppa*64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ ia64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ *)
+ m4_if($1, [], [
+ # Older versions of the 11.00 compiler do not understand -b yet
+ # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
+ _LT_LINKER_OPTION([if $CC understands -b],
+ _LT_TAGVAR(lt_cv_prog_compiler__b, $1), [-b],
+ [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'],
+ [_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'])],
+ [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'])
+ ;;
+ esac
+ fi
+ if test "$with_gnu_ld" = no; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+ case $host_cpu in
+ hppa*64*|ia64*)
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+ *)
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ ;;
+ esac
+ fi
+ ;;
+
+ irix5* | irix6* | nonstopux*)
+ if test "$GCC" = yes; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ # Try to use the -exported_symbol ld option, if it does not
+ # work, assume that -exports_file does not work either and
+ # implicitly export all symbols.
+ # This should be the same for all languages, so no per-tag cache variable.
+ AC_CACHE_CHECK([whether the $host_os linker accepts -exported_symbol],
+ [lt_cv_irix_exported_symbol],
+ [save_LDFLAGS="$LDFLAGS"
+ LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+ AC_LINK_IFELSE(
+ [AC_LANG_SOURCE(
+ [AC_LANG_CASE([C], [[int foo (void) { return 0; }]],
+ [C++], [[int foo (void) { return 0; }]],
+ [Fortran 77], [[
+ subroutine foo
+ end]],
+ [Fortran], [[
+ subroutine foo
+ end]])])],
+ [lt_cv_irix_exported_symbol=yes],
+ [lt_cv_irix_exported_symbol=no])
+ LDFLAGS="$save_LDFLAGS"])
+ if test "$lt_cv_irix_exported_symbol" = yes; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+ fi
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+ fi
+ _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_TAGVAR(inherit_rpath, $1)=yes
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ ;;
+
+ netbsd*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
+ fi
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ newsos6)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ *nto* | *qnx*)
+ ;;
+
+ openbsd*)
+ if test -f /usr/libexec/ld.so; then
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ else
+ case $host_os in
+ openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ ;;
+ esac
+ fi
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+
+ os2*)
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+ _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+ ;;
+
+ osf3*)
+ if test "$GCC" = yes; then
+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ else
+ _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ fi
+ _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ ;;
+
+ osf4* | osf5*) # as osf3* with the addition of -msym flag
+ if test "$GCC" = yes; then
+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ else
+ _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
+ $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+
+ # Both c and cxx compiler support -rpath directly
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+ fi
+ _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ ;;
+
+ solaris*)
+ _LT_TAGVAR(no_undefined_flag, $1)=' -z defs'
+ if test "$GCC" = yes; then
+ wlarc='${wl}'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ else
+ case `$CC -V 2>&1` in
+ *"Compilers 5.0"*)
+ wlarc=''
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+ ;;
+ *)
+ wlarc='${wl}'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ ;;
+ esac
+ fi
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ case $host_os in
+ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+ *)
+ # The compiler driver will combine and reorder linker options,
+ # but understands `-z linker_flag'. GCC discards it without `$wl',
+ # but is careful enough not to reorder.
+ # Supported since Solaris 2.6 (maybe 2.5.1?)
+ if test "$GCC" = yes; then
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+ else
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
+ fi
+ ;;
+ esac
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ ;;
+
+ sunos4*)
+ if test "x$host_vendor" = xsequent; then
+ # Use $CC to link under sequent, because it throws in some extra .o
+ # files that make .init and .fini sections work.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+ fi
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ sysv4)
+ case $host_vendor in
+ sni)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true???
+ ;;
+ siemens)
+ ## LD is ld it makes a PLAMLIB
+ ## CC just makes a GrossModule.
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ ;;
+ motorola)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
+ ;;
+ esac
+ runpath_var='LD_RUN_PATH'
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ sysv4.3*)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
+ ;;
+
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ runpath_var=LD_RUN_PATH
+ hardcode_runpath_var=yes
+ _LT_TAGVAR(ld_shlibs, $1)=yes
+ fi
+ ;;
+
+ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
+ _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ runpath_var='LD_RUN_PATH'
+
+ if test "$GCC" = yes; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ fi
+ ;;
+
+ sysv5* | sco3.2v5* | sco5v6*)
+ # Note: We can NOT use -z defs as we might desire, because we do not
+ # link with -lc, and that would cause any symbols used from libc to
+ # always be unresolved, which means just about no library would
+ # ever link correctly. If we're not using GNU ld we use -z text
+ # though, which does catch some bad symbols but isn't as heavy-handed
+ # as -z defs.
+ _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+ _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
+ runpath_var='LD_RUN_PATH'
+
+ if test "$GCC" = yes; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ fi
+ ;;
+
+ uts4*)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ *)
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+
+ if test x$host_vendor = xsni; then
+ case $host in
+ sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Blargedynsym'
+ ;;
+ esac
+ fi
+ fi
+])
+AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
+test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+
+_LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld
+
+_LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl
+_LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl
+_LT_DECL([], [extract_expsyms_cmds], [2],
+ [The commands to extract the exported symbol list from a shared archive])
+
+#
+# Do we need to explicitly link libc?
+#
+case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in
+x|xyes)
+ # Assume -lc should be added
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+
+ if test "$enable_shared" = yes && test "$GCC" = yes; then
+ case $_LT_TAGVAR(archive_cmds, $1) in
+ *'~'*)
+ # FIXME: we may have to deal with multi-command sequences.
+ ;;
+ '$CC '*)
+ # Test whether the compiler implicitly links with -lc since on some
+ # systems, -lgcc has to come before -lc. If gcc already passes -lc
+ # to ld, don't add -lc before -lgcc.
+ AC_CACHE_CHECK([whether -lc should be explicitly linked in],
+ [lt_cv_]_LT_TAGVAR(archive_cmds_need_lc, $1),
+ [$RM conftest*
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+ if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
+ soname=conftest
+ lib=conftest
+ libobjs=conftest.$ac_objext
+ deplibs=
+ wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1)
+ pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1)
+ compiler_flags=-v
+ linker_flags=-v
+ verstring=
+ output_objdir=.
+ libname=conftest
+ lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1)
+ _LT_TAGVAR(allow_undefined_flag, $1)=
+ if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1)
+ then
+ lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ else
+ lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+ fi
+ _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
+ else
+ cat conftest.err 1>&5
+ fi
+ $RM conftest*
+ ])
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=$lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)
+ ;;
+ esac
+ fi
+ ;;
+esac
+
+_LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0],
+ [Whether or not to add -lc for building shared libraries])
+_LT_TAGDECL([allow_libtool_libs_with_static_runtimes],
+ [enable_shared_with_static_runtimes], [0],
+ [Whether or not to disallow shared libs when runtime libs are static])
+_LT_TAGDECL([], [export_dynamic_flag_spec], [1],
+ [Compiler flag to allow reflexive dlopens])
+_LT_TAGDECL([], [whole_archive_flag_spec], [1],
+ [Compiler flag to generate shared objects directly from archives])
+_LT_TAGDECL([], [compiler_needs_object], [1],
+ [Whether the compiler copes with passing no objects directly])
+_LT_TAGDECL([], [old_archive_from_new_cmds], [2],
+ [Create an old-style archive from a shared archive])
+_LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2],
+ [Create a temporary old-style archive to link instead of a shared archive])
+_LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive])
+_LT_TAGDECL([], [archive_expsym_cmds], [2])
+_LT_TAGDECL([], [module_cmds], [2],
+ [Commands used to build a loadable module if different from building
+ a shared archive.])
+_LT_TAGDECL([], [module_expsym_cmds], [2])
+_LT_TAGDECL([], [with_gnu_ld], [1],
+ [Whether we are building with GNU ld or not])
+_LT_TAGDECL([], [allow_undefined_flag], [1],
+ [Flag that allows shared libraries with undefined symbols to be built])
+_LT_TAGDECL([], [no_undefined_flag], [1],
+ [Flag that enforces no undefined symbols])
+_LT_TAGDECL([], [hardcode_libdir_flag_spec], [1],
+ [Flag to hardcode $libdir into a binary during linking.
+ This must work even if $libdir does not exist])
+_LT_TAGDECL([], [hardcode_libdir_separator], [1],
+ [Whether we need a single "-rpath" flag with a separated argument])
+_LT_TAGDECL([], [hardcode_direct], [0],
+ [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
+ DIR into the resulting binary])
+_LT_TAGDECL([], [hardcode_direct_absolute], [0],
+ [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
+ DIR into the resulting binary and the resulting library dependency is
+ "absolute", i.e impossible to change by setting ${shlibpath_var} if the
+ library is relocated])
+_LT_TAGDECL([], [hardcode_minus_L], [0],
+ [Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+ into the resulting binary])
+_LT_TAGDECL([], [hardcode_shlibpath_var], [0],
+ [Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+ into the resulting binary])
+_LT_TAGDECL([], [hardcode_automatic], [0],
+ [Set to "yes" if building a shared library automatically hardcodes DIR
+ into the library and all subsequent libraries and executables linked
+ against it])
+_LT_TAGDECL([], [inherit_rpath], [0],
+ [Set to yes if linker adds runtime paths of dependent libraries
+ to runtime path list])
+_LT_TAGDECL([], [link_all_deplibs], [0],
+ [Whether libtool must link a program against all its dependency libraries])
+_LT_TAGDECL([], [always_export_symbols], [0],
+ [Set to "yes" if exported symbols are required])
+_LT_TAGDECL([], [export_symbols_cmds], [2],
+ [The commands to list exported symbols])
+_LT_TAGDECL([], [exclude_expsyms], [1],
+ [Symbols that should not be listed in the preloaded symbols])
+_LT_TAGDECL([], [include_expsyms], [1],
+ [Symbols that must always be exported])
+_LT_TAGDECL([], [prelink_cmds], [2],
+ [Commands necessary for linking programs (against libraries) with templates])
+_LT_TAGDECL([], [postlink_cmds], [2],
+ [Commands necessary for finishing linking programs])
+_LT_TAGDECL([], [file_list_spec], [1],
+ [Specify filename containing input files])
+dnl FIXME: Not yet implemented
+dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1],
+dnl [Compiler flag to generate thread safe objects])
+])# _LT_LINKER_SHLIBS
+
+
+# _LT_LANG_C_CONFIG([TAG])
+# ------------------------
+# Ensure that the configuration variables for a C compiler are suitably
+# defined. These variables are subsequently used by _LT_CONFIG to write
+# the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_C_CONFIG],
+[m4_require([_LT_DECL_EGREP])dnl
+lt_save_CC="$CC"
+AC_LANG_PUSH(C)
+
+# Source file extension for C test sources.
+ac_ext=c
+
+# Object file extension for compiled C test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='int main(){return(0);}'
+
+_LT_TAG_COMPILER
+# Save the default compiler, since it gets overwritten when the other
+# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
+compiler_DEFAULT=$CC
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+if test -n "$compiler"; then
+ _LT_COMPILER_NO_RTTI($1)
+ _LT_COMPILER_PIC($1)
+ _LT_COMPILER_C_O($1)
+ _LT_COMPILER_FILE_LOCKS($1)
+ _LT_LINKER_SHLIBS($1)
+ _LT_SYS_DYNAMIC_LINKER($1)
+ _LT_LINKER_HARDCODE_LIBPATH($1)
+ LT_SYS_DLOPEN_SELF
+ _LT_CMD_STRIPLIB
+
+ # Report which library types will actually be built
+ AC_MSG_CHECKING([if libtool supports shared libraries])
+ AC_MSG_RESULT([$can_build_shared])
+
+ AC_MSG_CHECKING([whether to build shared libraries])
+ test "$can_build_shared" = "no" && enable_shared=no
+
+ # On AIX, shared libraries and static libraries use the same namespace, and
+ # are all built from PIC.
+ case $host_os in
+ aix3*)
+ test "$enable_shared" = yes && enable_static=no
+ if test -n "$RANLIB"; then
+ archive_cmds="$archive_cmds~\$RANLIB \$lib"
+ postinstall_cmds='$RANLIB $lib'
+ fi
+ ;;
+
+ aix[[4-9]]*)
+ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+ test "$enable_shared" = yes && enable_static=no
+ fi
+ ;;
+ esac
+ AC_MSG_RESULT([$enable_shared])
+
+ AC_MSG_CHECKING([whether to build static libraries])
+ # Make sure either enable_shared or enable_static is yes.
+ test "$enable_shared" = yes || enable_static=yes
+ AC_MSG_RESULT([$enable_static])
+
+ _LT_CONFIG($1)
+fi
+AC_LANG_POP
+CC="$lt_save_CC"
+])# _LT_LANG_C_CONFIG
+
+
+# _LT_LANG_CXX_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for a C++ compiler are suitably
+# defined. These variables are subsequently used by _LT_CONFIG to write
+# the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_CXX_CONFIG],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_PATH_MANIFEST_TOOL])dnl
+if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
+ ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
+ (test "X$CXX" != "Xg++"))) ; then
+ AC_PROG_CXXCPP
+else
+ _lt_caught_CXX_error=yes
+fi
+
+AC_LANG_PUSH(C++)
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_TAGVAR(allow_undefined_flag, $1)=
+_LT_TAGVAR(always_export_symbols, $1)=no
+_LT_TAGVAR(archive_expsym_cmds, $1)=
+_LT_TAGVAR(compiler_needs_object, $1)=no
+_LT_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_TAGVAR(hardcode_direct, $1)=no
+_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_TAGVAR(hardcode_minus_L, $1)=no
+_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+_LT_TAGVAR(hardcode_automatic, $1)=no
+_LT_TAGVAR(inherit_rpath, $1)=no
+_LT_TAGVAR(module_cmds, $1)=
+_LT_TAGVAR(module_expsym_cmds, $1)=
+_LT_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+_LT_TAGVAR(no_undefined_flag, $1)=
+_LT_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+
+# Source file extension for C++ test sources.
+ac_ext=cpp
+
+# Object file extension for compiled C++ test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# No sense in running all these tests if we already determined that
+# the CXX compiler isn't working. Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test "$_lt_caught_CXX_error" != yes; then
+ # Code to be used in simple compile tests
+ lt_simple_compile_test_code="int some_variable = 0;"
+
+ # Code to be used in simple link tests
+ lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }'
+
+ # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+ _LT_TAG_COMPILER
+
+ # save warnings/boilerplate of simple test code
+ _LT_COMPILER_BOILERPLATE
+ _LT_LINKER_BOILERPLATE
+
+ # Allow CC to be a program name with arguments.
+ lt_save_CC=$CC
+ lt_save_CFLAGS=$CFLAGS
+ lt_save_LD=$LD
+ lt_save_GCC=$GCC
+ GCC=$GXX
+ lt_save_with_gnu_ld=$with_gnu_ld
+ lt_save_path_LD=$lt_cv_path_LD
+ if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
+ lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
+ else
+ $as_unset lt_cv_prog_gnu_ld
+ fi
+ if test -n "${lt_cv_path_LDCXX+set}"; then
+ lt_cv_path_LD=$lt_cv_path_LDCXX
+ else
+ $as_unset lt_cv_path_LD
+ fi
+ test -z "${LDCXX+set}" || LD=$LDCXX
+ CC=${CXX-"c++"}
+ CFLAGS=$CXXFLAGS
+ compiler=$CC
+ _LT_TAGVAR(compiler, $1)=$CC
+ _LT_CC_BASENAME([$compiler])
+
+ if test -n "$compiler"; then
+ # We don't want -fno-exception when compiling C++ code, so set the
+ # no_builtin_flag separately
+ if test "$GXX" = yes; then
+ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
+ else
+ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
+ fi
+
+ if test "$GXX" = yes; then
+ # Set up default GNU C++ configuration
+
+ LT_PATH_LD
+
+ # Check if GNU C++ uses GNU ld as the underlying linker, since the
+ # archiving commands below assume that GNU ld is being used.
+ if test "$with_gnu_ld" = yes; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+
+ # If archive_cmds runs LD, not CC, wlarc should be empty
+ # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
+ # investigate it a little bit more. (MM)
+ wlarc='${wl}'
+
+ # ancient GNU ld didn't support --whole-archive et. al.
+ if eval "`$CC -print-prog-name=ld` --help 2>&1" |
+ $GREP 'no-whole-archive' > /dev/null; then
+ _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ else
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=
+ fi
+ else
+ with_gnu_ld=no
+ wlarc=
+
+ # A generic and very simple default shared library creation
+ # command for GNU C++ for the case where it uses the native
+ # linker, instead of GNU ld. If possible, this setting should
+ # overridden to take advantage of the native linker features on
+ # the platform it is being used on.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+ fi
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+
+ else
+ GXX=no
+ with_gnu_ld=no
+ wlarc=
+ fi
+
+ # PORTME: fill in a description of your system's C++ link characteristics
+ AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
+ _LT_TAGVAR(ld_shlibs, $1)=yes
+ case $host_os in
+ aix3*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ aix[[4-9]]*)
+ if test "$host_cpu" = ia64; then
+ # On IA64, the linker does run time linking by default, so we don't
+ # have to do anything special.
+ aix_use_runtimelinking=no
+ exp_sym_flag='-Bexport'
+ no_entry_flag=""
+ else
+ aix_use_runtimelinking=no
+
+ # Test if we are trying to use run time linking or normal
+ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+ # need to do runtime linking.
+ case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
+ for ld_flag in $LDFLAGS; do
+ case $ld_flag in
+ *-brtl*)
+ aix_use_runtimelinking=yes
+ break
+ ;;
+ esac
+ done
+ ;;
+ esac
+
+ exp_sym_flag='-bexport'
+ no_entry_flag='-bnoentry'
+ fi
+
+ # When large executables or shared objects are built, AIX ld can
+ # have problems creating the table of contents. If linking a library
+ # or program results in "error TOC overflow" add -mminimal-toc to
+ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
+ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+ _LT_TAGVAR(archive_cmds, $1)=''
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
+
+ if test "$GXX" = yes; then
+ case $host_os in aix4.[[012]]|aix4.[[012]].*)
+ # We only want to do this on AIX 4.2 and lower, the check
+ # below for broken collect2 doesn't work under 4.3+
+ collect2name=`${CC} -print-prog-name=collect2`
+ if test -f "$collect2name" &&
+ strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+ then
+ # We have reworked collect2
+ :
+ else
+ # We have old collect2
+ _LT_TAGVAR(hardcode_direct, $1)=unsupported
+ # It fails to find uninstalled libraries when the uninstalled
+ # path is not listed in the libpath. Setting hardcode_minus_L
+ # to unsupported forces relinking
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=
+ fi
+ esac
+ shared_flag='-shared'
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag="$shared_flag "'${wl}-G'
+ fi
+ else
+ # not using gcc
+ if test "$host_cpu" = ia64; then
+ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+ # chokes on -Wl,-G. The following line is correct:
+ shared_flag='-G'
+ else
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag='${wl}-G'
+ else
+ shared_flag='${wl}-bM:SRE'
+ fi
+ fi
+ fi
+
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
+ # It seems that -bexpall does not export symbols beginning with
+ # underscore (_), so it is better to generate a list of symbols to
+ # export.
+ _LT_TAGVAR(always_export_symbols, $1)=yes
+ if test "$aix_use_runtimelinking" = yes; then
+ # Warning - without using the other runtime loading flags (-brtl),
+ # -berok will link without error, but may produce a broken library.
+ _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
+ # Determine the default libpath from the value encoded in an empty
+ # executable.
+ _LT_SYS_MODULE_PATH_AIX([$1])
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ else
+ if test "$host_cpu" = ia64; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+ _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
+ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+ else
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+ _LT_SYS_MODULE_PATH_AIX([$1])
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+ # Warning - without using the other run time loading flags,
+ # -berok will link without error, but may produce a broken library.
+ _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
+ if test "$with_gnu_ld" = yes; then
+ # We only use this code for GNU lds that support --whole-archive.
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+ else
+ # Exported symbols can be pulled into shared objects from archives
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+ fi
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+ # This is similar to how AIX traditionally builds its shared
+ # libraries.
+ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+ fi
+ fi
+ ;;
+
+ beos*)
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ # Joseph Beckenbach <jrb3 at best.com> says some releases of gcc
+ # support --undefined. This deserves some investigation. FIXME
+ _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+
+ chorus*)
+ case $cc_basename in
+ *)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+ ;;
+
+ cygwin* | mingw* | pw32* | cegcc*)
+ case $GXX,$cc_basename in
+ ,cl* | no,cl*)
+ # Native MSVC
+ # hardcode_libdir_flag_spec is actually meaningless, as there is
+ # no search path for DLLs.
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_TAGVAR(always_export_symbols, $1)=yes
+ _LT_TAGVAR(file_list_spec, $1)='@'
+ # Tell ltmain to make .lib files, not .a files.
+ libext=lib
+ # Tell ltmain to make .dll files, not .so files.
+ shrext_cmds=".dll"
+ # FIXME: Setting linknames here is a bad hack.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
+ _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+ $SED -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
+ else
+ $SED -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
+ fi~
+ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+ linknames='
+ # The linker will not automatically build a static lib if we build a DLL.
+ # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+ # Don't use ranlib
+ _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
+ _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
+ lt_tool_outputfile="@TOOL_OUTPUT@"~
+ case $lt_outputfile in
+ *.exe|*.EXE) ;;
+ *)
+ lt_outputfile="$lt_outputfile.exe"
+ lt_tool_outputfile="$lt_tool_outputfile.exe"
+ ;;
+ esac~
+ func_to_tool_file "$lt_outputfile"~
+ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
+ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+ $RM "$lt_outputfile.manifest";
+ fi'
+ ;;
+ *)
+ # g++
+ # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+ # as there is no search path for DLLs.
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols'
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_TAGVAR(always_export_symbols, $1)=no
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+
+ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ # If the export-symbols file already is a .def file (1st line
+ # is EXPORTS), use it as is; otherwise, prepend...
+ _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+ cp $export_symbols $output_objdir/$soname.def;
+ else
+ echo EXPORTS > $output_objdir/$soname.def;
+ cat $export_symbols >> $output_objdir/$soname.def;
+ fi~
+ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+ esac
+ ;;
+ darwin* | rhapsody*)
+ _LT_DARWIN_LINKER_FEATURES($1)
+ ;;
+
+ dgux*)
+ case $cc_basename in
+ ec++*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ ghcx*)
+ # Green Hills C++ Compiler
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+ ;;
+
+ freebsd2.*)
+ # C++ shared libraries reported to be fairly broken before
+ # switch to ELF
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+
+ freebsd-elf*)
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ ;;
+
+ freebsd* | dragonfly*)
+ # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
+ # conventions
+ _LT_TAGVAR(ld_shlibs, $1)=yes
+ ;;
+
+ gnu*)
+ ;;
+
+ haiku*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ ;;
+
+ hpux9*)
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
+ # but as the default
+ # location of the library.
+
+ case $cc_basename in
+ CC*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ aCC*)
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+ ;;
+ *)
+ if test "$GXX" = yes; then
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ else
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+ esac
+ ;;
+
+ hpux10*|hpux11*)
+ if test $with_gnu_ld = no; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+ case $host_cpu in
+ hppa*64*|ia64*)
+ ;;
+ *)
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ ;;
+ esac
+ fi
+ case $host_cpu in
+ hppa*64*|ia64*)
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+ *)
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
+ # but as the default
+ # location of the library.
+ ;;
+ esac
+
+ case $cc_basename in
+ CC*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ aCC*)
+ case $host_cpu in
+ hppa*64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ ia64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ esac
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+ ;;
+ *)
+ if test "$GXX" = yes; then
+ if test $with_gnu_ld = no; then
+ case $host_cpu in
+ hppa*64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ ia64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ esac
+ fi
+ else
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+ esac
+ ;;
+
+ interix[[3-9]]*)
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+ # Instead, shared libraries are loaded at an image base (0x10000000 by
+ # default) and relocated if they conflict, which is a slow very memory
+ # consuming and fragmenting process. To avoid this, we pick a random,
+ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+ # time. Moving up from 0x10000000 also allows more sbrk(2) space.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ ;;
+ irix5* | irix6*)
+ case $cc_basename in
+ CC*)
+ # SGI C++
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+
+ # Archives containing C++ object files must be created using
+ # "CC -ar", where "CC" is the IRIX C++ compiler. This is
+ # necessary to make sure instantiated templates are included
+ # in the archive.
+ _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
+ ;;
+ *)
+ if test "$GXX" = yes; then
+ if test "$with_gnu_ld" = no; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib'
+ fi
+ fi
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ ;;
+ esac
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_TAGVAR(inherit_rpath, $1)=yes
+ ;;
+
+ linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ case $cc_basename in
+ KCC*)
+ # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+ # KCC will only create a shared library if the output file
+ # ends with ".so" (or ".sl" for HP-UX), so rename the library
+ # to its proper name (with version) after linking.
+ _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+
+ # Archives containing C++ object files must be created using
+ # "CC -Bstatic", where "CC" is the KAI C++ compiler.
+ _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
+ ;;
+ icpc* | ecpc* )
+ # Intel C++
+ with_gnu_ld=yes
+ # version 8.0 and above of icpc choke on multiply defined symbols
+ # if we add $predep_objects and $postdep_objects, however 7.1 and
+ # earlier do not add the objects themselves.
+ case `$CC -V 2>&1` in
+ *"Version 7."*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ ;;
+ *) # Version 8.0 or newer
+ tmp_idyn=
+ case $host_cpu in
+ ia64*) tmp_idyn=' -i_dynamic';;
+ esac
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ ;;
+ esac
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+ ;;
+ pgCC* | pgcpp*)
+ # Portland Group C++ compiler
+ case `$CC -V` in
+ *pgCC\ [[1-5]].* | *pgcpp\ [[1-5]].*)
+ _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
+ compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"'
+ _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
+ $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~
+ $RANLIB $oldlib'
+ _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+ ;;
+ *) # Version 6 and above use weak symbols
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+ ;;
+ esac
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ ;;
+ cxx*)
+ # Compaq C++
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
+
+ runpath_var=LD_RUN_PATH
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed'
+ ;;
+ xl* | mpixl* | bgxl*)
+ # IBM XL 8.0 on PPC, with GNU ld
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ if test "x$supports_anon_versioning" = xyes; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+ fi
+ ;;
+ *)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*)
+ # Sun C++ 5.9
+ _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ _LT_TAGVAR(compiler_needs_object, $1)=yes
+
+ # Not sure whether something based on
+ # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
+ # would be better.
+ output_verbose_link_cmd='func_echo_all'
+
+ # Archives containing C++ object files must be created using
+ # "CC -xar", where "CC" is the Sun C++ compiler. This is
+ # necessary to make sure instantiated templates are included
+ # in the archive.
+ _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+
+ lynxos*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+
+ m88k*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+
+ mvs*)
+ case $cc_basename in
+ cxx*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+ ;;
+
+ netbsd*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
+ wlarc=
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ fi
+ # Workaround some broken pre-1.5 toolchains
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
+ ;;
+
+ *nto* | *qnx*)
+ _LT_TAGVAR(ld_shlibs, $1)=yes
+ ;;
+
+ openbsd2*)
+ # C++ shared libraries are fairly broken
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+
+ openbsd*)
+ if test -f /usr/libexec/ld.so; then
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ fi
+ output_verbose_link_cmd=func_echo_all
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+
+ osf3* | osf4* | osf5*)
+ case $cc_basename in
+ KCC*)
+ # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+ # KCC will only create a shared library if the output file
+ # ends with ".so" (or ".sl" for HP-UX), so rename the library
+ # to its proper name (with version) after linking.
+ _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+ # Archives containing C++ object files must be created using
+ # the KAI C++ compiler.
+ case $host in
+ osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;;
+ *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;;
+ esac
+ ;;
+ RCC*)
+ # Rational C++ 2.4.1
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ cxx*)
+ case $host in
+ osf3*)
+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ ;;
+ *)
+ _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
+ echo "-hidden">> $lib.exp~
+ $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~
+ $RM $lib.exp'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+ ;;
+ esac
+
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+ ;;
+ *)
+ if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+ case $host in
+ osf3*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ ;;
+ esac
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+
+ else
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+ esac
+ ;;
+
+ psos*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+
+ sunos4*)
+ case $cc_basename in
+ CC*)
+ # Sun C++ 4.x
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ lcc*)
+ # Lucid
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+ ;;
+
+ solaris*)
+ case $cc_basename in
+ CC* | sunCC*)
+ # Sun C++ 4.2, 5.x and Centerline C++
+ _LT_TAGVAR(archive_cmds_need_lc,$1)=yes
+ _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ case $host_os in
+ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+ *)
+ # The compiler driver will combine and reorder linker options,
+ # but understands `-z linker_flag'.
+ # Supported since Solaris 2.6 (maybe 2.5.1?)
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
+ ;;
+ esac
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+
+ output_verbose_link_cmd='func_echo_all'
+
+ # Archives containing C++ object files must be created using
+ # "CC -xar", where "CC" is the Sun C++ compiler. This is
+ # necessary to make sure instantiated templates are included
+ # in the archive.
+ _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
+ ;;
+ gcx*)
+ # Green Hills C++ Compiler
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+
+ # The C++ compiler must be used to create the archive.
+ _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
+ ;;
+ *)
+ # GNU C++ compiler with Solaris linker
+ if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+ _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
+ if $CC --version | $GREP -v '^2\.7' > /dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+ else
+ # g++ 2.7 appears to require `-G' NOT `-shared' on this
+ # platform.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+ fi
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
+ case $host_os in
+ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+ *)
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+ ;;
+ esac
+ fi
+ ;;
+ esac
+ ;;
+
+ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
+ _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ runpath_var='LD_RUN_PATH'
+
+ case $cc_basename in
+ CC*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ ;;
+
+ sysv5* | sco3.2v5* | sco5v6*)
+ # Note: We can NOT use -z defs as we might desire, because we do not
+ # link with -lc, and that would cause any symbols used from libc to
+ # always be unresolved, which means just about no library would
+ # ever link correctly. If we're not using GNU ld we use -z text
+ # though, which does catch some bad symbols but isn't as heavy-handed
+ # as -z defs.
+ _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+ _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
+ runpath_var='LD_RUN_PATH'
+
+ case $cc_basename in
+ CC*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(old_archive_cmds, $1)='$CC -Tprelink_objects $oldobjs~
+ '"$_LT_TAGVAR(old_archive_cmds, $1)"
+ _LT_TAGVAR(reload_cmds, $1)='$CC -Tprelink_objects $reload_objs~
+ '"$_LT_TAGVAR(reload_cmds, $1)"
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ ;;
+
+ tandem*)
+ case $cc_basename in
+ NCC*)
+ # NonStop-UX NCC 3.20
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+ ;;
+
+ vxworks*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+
+ *)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+
+ AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
+ test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+
+ _LT_TAGVAR(GCC, $1)="$GXX"
+ _LT_TAGVAR(LD, $1)="$LD"
+
+ ## CAVEAT EMPTOR:
+ ## There is no encapsulation within the following macros, do not change
+ ## the running order or otherwise move them around unless you know exactly
+ ## what you are doing...
+ _LT_SYS_HIDDEN_LIBDEPS($1)
+ _LT_COMPILER_PIC($1)
+ _LT_COMPILER_C_O($1)
+ _LT_COMPILER_FILE_LOCKS($1)
+ _LT_LINKER_SHLIBS($1)
+ _LT_SYS_DYNAMIC_LINKER($1)
+ _LT_LINKER_HARDCODE_LIBPATH($1)
+
+ _LT_CONFIG($1)
+ fi # test -n "$compiler"
+
+ CC=$lt_save_CC
+ CFLAGS=$lt_save_CFLAGS
+ LDCXX=$LD
+ LD=$lt_save_LD
+ GCC=$lt_save_GCC
+ with_gnu_ld=$lt_save_with_gnu_ld
+ lt_cv_path_LDCXX=$lt_cv_path_LD
+ lt_cv_path_LD=$lt_save_path_LD
+ lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
+ lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
+fi # test "$_lt_caught_CXX_error" != yes
+
+AC_LANG_POP
+])# _LT_LANG_CXX_CONFIG
+
+
+# _LT_FUNC_STRIPNAME_CNF
+# ----------------------
+# func_stripname_cnf prefix suffix name
+# strip PREFIX and SUFFIX off of NAME.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+#
+# This function is identical to the (non-XSI) version of func_stripname,
+# except this one can be used by m4 code that may be executed by configure,
+# rather than the libtool script.
+m4_defun([_LT_FUNC_STRIPNAME_CNF],[dnl
+AC_REQUIRE([_LT_DECL_SED])
+AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])
+func_stripname_cnf ()
+{
+ case ${2} in
+ .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
+ *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
+ esac
+} # func_stripname_cnf
+])# _LT_FUNC_STRIPNAME_CNF
+
+# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME])
+# ---------------------------------
+# Figure out "hidden" library dependencies from verbose
+# compiler output when linking a shared library.
+# Parse the compiler output and extract the necessary
+# objects, libraries and library flags.
+m4_defun([_LT_SYS_HIDDEN_LIBDEPS],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+AC_REQUIRE([_LT_FUNC_STRIPNAME_CNF])dnl
+# Dependencies to place before and after the object being linked:
+_LT_TAGVAR(predep_objects, $1)=
+_LT_TAGVAR(postdep_objects, $1)=
+_LT_TAGVAR(predeps, $1)=
+_LT_TAGVAR(postdeps, $1)=
+_LT_TAGVAR(compiler_lib_search_path, $1)=
+
+dnl we can't use the lt_simple_compile_test_code here,
+dnl because it contains code intended for an executable,
+dnl not a library. It's possible we should let each
+dnl tag define a new lt_????_link_test_code variable,
+dnl but it's only used here...
+m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF
+int a;
+void foo (void) { a = 0; }
+_LT_EOF
+], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF
+class Foo
+{
+public:
+ Foo (void) { a = 0; }
+private:
+ int a;
+};
+_LT_EOF
+], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF
+ subroutine foo
+ implicit none
+ integer*4 a
+ a=0
+ return
+ end
+_LT_EOF
+], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF
+ subroutine foo
+ implicit none
+ integer a
+ a=0
+ return
+ end
+_LT_EOF
+], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF
+public class foo {
+ private int a;
+ public void bar (void) {
+ a = 0;
+ }
+};
+_LT_EOF
+], [$1], [GO], [cat > conftest.$ac_ext <<_LT_EOF
+package foo
+func foo() {
+}
+_LT_EOF
+])
+
+_lt_libdeps_save_CFLAGS=$CFLAGS
+case "$CC $CFLAGS " in #(
+*\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;;
+*\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;;
+*\ -fuse-linker-plugin*\ *) CFLAGS="$CFLAGS -fno-use-linker-plugin" ;;
+esac
+
+dnl Parse the compiler output and extract the necessary
+dnl objects, libraries and library flags.
+if AC_TRY_EVAL(ac_compile); then
+ # Parse the compiler output and extract the necessary
+ # objects, libraries and library flags.
+
+ # Sentinel used to keep track of whether or not we are before
+ # the conftest object file.
+ pre_test_object_deps_done=no
+
+ for p in `eval "$output_verbose_link_cmd"`; do
+ case ${prev}${p} in
+
+ -L* | -R* | -l*)
+ # Some compilers place space between "-{L,R}" and the path.
+ # Remove the space.
+ if test $p = "-L" ||
+ test $p = "-R"; then
+ prev=$p
+ continue
+ fi
+
+ # Expand the sysroot to ease extracting the directories later.
+ if test -z "$prev"; then
+ case $p in
+ -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;;
+ -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;;
+ -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;;
+ esac
+ fi
+ case $p in
+ =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;;
+ esac
+ if test "$pre_test_object_deps_done" = no; then
+ case ${prev} in
+ -L | -R)
+ # Internal compiler library paths should come after those
+ # provided the user. The postdeps already come after the
+ # user supplied libs so there is no need to process them.
+ if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then
+ _LT_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
+ else
+ _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
+ fi
+ ;;
+ # The "-l" case would never come before the object being
+ # linked, so don't bother handling this case.
+ esac
+ else
+ if test -z "$_LT_TAGVAR(postdeps, $1)"; then
+ _LT_TAGVAR(postdeps, $1)="${prev}${p}"
+ else
+ _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}"
+ fi
+ fi
+ prev=
+ ;;
+
+ *.lto.$objext) ;; # Ignore GCC LTO objects
+ *.$objext)
+ # This assumes that the test object file only shows up
+ # once in the compiler output.
+ if test "$p" = "conftest.$objext"; then
+ pre_test_object_deps_done=yes
+ continue
+ fi
+
+ if test "$pre_test_object_deps_done" = no; then
+ if test -z "$_LT_TAGVAR(predep_objects, $1)"; then
+ _LT_TAGVAR(predep_objects, $1)="$p"
+ else
+ _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p"
+ fi
+ else
+ if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then
+ _LT_TAGVAR(postdep_objects, $1)="$p"
+ else
+ _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p"
+ fi
+ fi
+ ;;
+
+ *) ;; # Ignore the rest.
+
+ esac
+ done
+
+ # Clean up.
+ rm -f a.out a.exe
+else
+ echo "libtool.m4: error: problem compiling $1 test program"
+fi
+
+$RM -f confest.$objext
+CFLAGS=$_lt_libdeps_save_CFLAGS
+
+# PORTME: override above test on systems where it is broken
+m4_if([$1], [CXX],
+[case $host_os in
+interix[[3-9]]*)
+ # Interix 3.5 installs completely hosed .la files for C++, so rather than
+ # hack all around it, let's just trust "g++" to DTRT.
+ _LT_TAGVAR(predep_objects,$1)=
+ _LT_TAGVAR(postdep_objects,$1)=
+ _LT_TAGVAR(postdeps,$1)=
+ ;;
+
+linux*)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*)
+ # Sun C++ 5.9
+
+ # The more standards-conforming stlport4 library is
+ # incompatible with the Cstd library. Avoid specifying
+ # it if it's in CXXFLAGS. Ignore libCrun as
+ # -library=stlport4 depends on it.
+ case " $CXX $CXXFLAGS " in
+ *" -library=stlport4 "*)
+ solaris_use_stlport4=yes
+ ;;
+ esac
+
+ if test "$solaris_use_stlport4" != yes; then
+ _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
+ fi
+ ;;
+ esac
+ ;;
+
+solaris*)
+ case $cc_basename in
+ CC* | sunCC*)
+ # The more standards-conforming stlport4 library is
+ # incompatible with the Cstd library. Avoid specifying
+ # it if it's in CXXFLAGS. Ignore libCrun as
+ # -library=stlport4 depends on it.
+ case " $CXX $CXXFLAGS " in
+ *" -library=stlport4 "*)
+ solaris_use_stlport4=yes
+ ;;
+ esac
+
+ # Adding this requires a known-good setup of shared libraries for
+ # Sun compiler versions before 5.6, else PIC objects from an old
+ # archive will be linked into the output, leading to subtle bugs.
+ if test "$solaris_use_stlport4" != yes; then
+ _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
+ fi
+ ;;
+ esac
+ ;;
+esac
+])
+
+case " $_LT_TAGVAR(postdeps, $1) " in
+*" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;;
+esac
+ _LT_TAGVAR(compiler_lib_search_dirs, $1)=
+if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then
+ _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
+fi
+_LT_TAGDECL([], [compiler_lib_search_dirs], [1],
+ [The directories searched by this compiler when creating a shared library])
+_LT_TAGDECL([], [predep_objects], [1],
+ [Dependencies to place before and after the objects being linked to
+ create a shared library])
+_LT_TAGDECL([], [postdep_objects], [1])
+_LT_TAGDECL([], [predeps], [1])
+_LT_TAGDECL([], [postdeps], [1])
+_LT_TAGDECL([], [compiler_lib_search_path], [1],
+ [The library search path used internally by the compiler when linking
+ a shared library])
+])# _LT_SYS_HIDDEN_LIBDEPS
+
+
+# _LT_LANG_F77_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for a Fortran 77 compiler are
+# suitably defined. These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_F77_CONFIG],
+[AC_LANG_PUSH(Fortran 77)
+if test -z "$F77" || test "X$F77" = "Xno"; then
+ _lt_disable_F77=yes
+fi
+
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_TAGVAR(allow_undefined_flag, $1)=
+_LT_TAGVAR(always_export_symbols, $1)=no
+_LT_TAGVAR(archive_expsym_cmds, $1)=
+_LT_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_TAGVAR(hardcode_direct, $1)=no
+_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_TAGVAR(hardcode_minus_L, $1)=no
+_LT_TAGVAR(hardcode_automatic, $1)=no
+_LT_TAGVAR(inherit_rpath, $1)=no
+_LT_TAGVAR(module_cmds, $1)=
+_LT_TAGVAR(module_expsym_cmds, $1)=
+_LT_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+_LT_TAGVAR(no_undefined_flag, $1)=
+_LT_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+
+# Source file extension for f77 test sources.
+ac_ext=f
+
+# Object file extension for compiled f77 test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# No sense in running all these tests if we already determined that
+# the F77 compiler isn't working. Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test "$_lt_disable_F77" != yes; then
+ # Code to be used in simple compile tests
+ lt_simple_compile_test_code="\
+ subroutine t
+ return
+ end
+"
+
+ # Code to be used in simple link tests
+ lt_simple_link_test_code="\
+ program t
+ end
+"
+
+ # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+ _LT_TAG_COMPILER
+
+ # save warnings/boilerplate of simple test code
+ _LT_COMPILER_BOILERPLATE
+ _LT_LINKER_BOILERPLATE
+
+ # Allow CC to be a program name with arguments.
+ lt_save_CC="$CC"
+ lt_save_GCC=$GCC
+ lt_save_CFLAGS=$CFLAGS
+ CC=${F77-"f77"}
+ CFLAGS=$FFLAGS
+ compiler=$CC
+ _LT_TAGVAR(compiler, $1)=$CC
+ _LT_CC_BASENAME([$compiler])
+ GCC=$G77
+ if test -n "$compiler"; then
+ AC_MSG_CHECKING([if libtool supports shared libraries])
+ AC_MSG_RESULT([$can_build_shared])
+
+ AC_MSG_CHECKING([whether to build shared libraries])
+ test "$can_build_shared" = "no" && enable_shared=no
+
+ # On AIX, shared libraries and static libraries use the same namespace, and
+ # are all built from PIC.
+ case $host_os in
+ aix3*)
+ test "$enable_shared" = yes && enable_static=no
+ if test -n "$RANLIB"; then
+ archive_cmds="$archive_cmds~\$RANLIB \$lib"
+ postinstall_cmds='$RANLIB $lib'
+ fi
+ ;;
+ aix[[4-9]]*)
+ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+ test "$enable_shared" = yes && enable_static=no
+ fi
+ ;;
+ esac
+ AC_MSG_RESULT([$enable_shared])
+
+ AC_MSG_CHECKING([whether to build static libraries])
+ # Make sure either enable_shared or enable_static is yes.
+ test "$enable_shared" = yes || enable_static=yes
+ AC_MSG_RESULT([$enable_static])
+
+ _LT_TAGVAR(GCC, $1)="$G77"
+ _LT_TAGVAR(LD, $1)="$LD"
+
+ ## CAVEAT EMPTOR:
+ ## There is no encapsulation within the following macros, do not change
+ ## the running order or otherwise move them around unless you know exactly
+ ## what you are doing...
+ _LT_COMPILER_PIC($1)
+ _LT_COMPILER_C_O($1)
+ _LT_COMPILER_FILE_LOCKS($1)
+ _LT_LINKER_SHLIBS($1)
+ _LT_SYS_DYNAMIC_LINKER($1)
+ _LT_LINKER_HARDCODE_LIBPATH($1)
+
+ _LT_CONFIG($1)
+ fi # test -n "$compiler"
+
+ GCC=$lt_save_GCC
+ CC="$lt_save_CC"
+ CFLAGS="$lt_save_CFLAGS"
+fi # test "$_lt_disable_F77" != yes
+
+AC_LANG_POP
+])# _LT_LANG_F77_CONFIG
+
+
+# _LT_LANG_FC_CONFIG([TAG])
+# -------------------------
+# Ensure that the configuration variables for a Fortran compiler are
+# suitably defined. These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_FC_CONFIG],
+[AC_LANG_PUSH(Fortran)
+
+if test -z "$FC" || test "X$FC" = "Xno"; then
+ _lt_disable_FC=yes
+fi
+
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_TAGVAR(allow_undefined_flag, $1)=
+_LT_TAGVAR(always_export_symbols, $1)=no
+_LT_TAGVAR(archive_expsym_cmds, $1)=
+_LT_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_TAGVAR(hardcode_direct, $1)=no
+_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_TAGVAR(hardcode_minus_L, $1)=no
+_LT_TAGVAR(hardcode_automatic, $1)=no
+_LT_TAGVAR(inherit_rpath, $1)=no
+_LT_TAGVAR(module_cmds, $1)=
+_LT_TAGVAR(module_expsym_cmds, $1)=
+_LT_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+_LT_TAGVAR(no_undefined_flag, $1)=
+_LT_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+
+# Source file extension for fc test sources.
+ac_ext=${ac_fc_srcext-f}
+
+# Object file extension for compiled fc test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# No sense in running all these tests if we already determined that
+# the FC compiler isn't working. Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test "$_lt_disable_FC" != yes; then
+ # Code to be used in simple compile tests
+ lt_simple_compile_test_code="\
+ subroutine t
+ return
+ end
+"
+
+ # Code to be used in simple link tests
+ lt_simple_link_test_code="\
+ program t
+ end
+"
+
+ # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+ _LT_TAG_COMPILER
+
+ # save warnings/boilerplate of simple test code
+ _LT_COMPILER_BOILERPLATE
+ _LT_LINKER_BOILERPLATE
+
+ # Allow CC to be a program name with arguments.
+ lt_save_CC="$CC"
+ lt_save_GCC=$GCC
+ lt_save_CFLAGS=$CFLAGS
+ CC=${FC-"f95"}
+ CFLAGS=$FCFLAGS
+ compiler=$CC
+ GCC=$ac_cv_fc_compiler_gnu
+
+ _LT_TAGVAR(compiler, $1)=$CC
+ _LT_CC_BASENAME([$compiler])
+
+ if test -n "$compiler"; then
+ AC_MSG_CHECKING([if libtool supports shared libraries])
+ AC_MSG_RESULT([$can_build_shared])
+
+ AC_MSG_CHECKING([whether to build shared libraries])
+ test "$can_build_shared" = "no" && enable_shared=no
+
+ # On AIX, shared libraries and static libraries use the same namespace, and
+ # are all built from PIC.
+ case $host_os in
+ aix3*)
+ test "$enable_shared" = yes && enable_static=no
+ if test -n "$RANLIB"; then
+ archive_cmds="$archive_cmds~\$RANLIB \$lib"
+ postinstall_cmds='$RANLIB $lib'
+ fi
+ ;;
+ aix[[4-9]]*)
+ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+ test "$enable_shared" = yes && enable_static=no
+ fi
+ ;;
+ esac
+ AC_MSG_RESULT([$enable_shared])
+
+ AC_MSG_CHECKING([whether to build static libraries])
+ # Make sure either enable_shared or enable_static is yes.
+ test "$enable_shared" = yes || enable_static=yes
+ AC_MSG_RESULT([$enable_static])
+
+ _LT_TAGVAR(GCC, $1)="$ac_cv_fc_compiler_gnu"
+ _LT_TAGVAR(LD, $1)="$LD"
+
+ ## CAVEAT EMPTOR:
+ ## There is no encapsulation within the following macros, do not change
+ ## the running order or otherwise move them around unless you know exactly
+ ## what you are doing...
+ _LT_SYS_HIDDEN_LIBDEPS($1)
+ _LT_COMPILER_PIC($1)
+ _LT_COMPILER_C_O($1)
+ _LT_COMPILER_FILE_LOCKS($1)
+ _LT_LINKER_SHLIBS($1)
+ _LT_SYS_DYNAMIC_LINKER($1)
+ _LT_LINKER_HARDCODE_LIBPATH($1)
+
+ _LT_CONFIG($1)
+ fi # test -n "$compiler"
+
+ GCC=$lt_save_GCC
+ CC=$lt_save_CC
+ CFLAGS=$lt_save_CFLAGS
+fi # test "$_lt_disable_FC" != yes
+
+AC_LANG_POP
+])# _LT_LANG_FC_CONFIG
+
+
+# _LT_LANG_GCJ_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for the GNU Java Compiler compiler
+# are suitably defined. These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_GCJ_CONFIG],
+[AC_REQUIRE([LT_PROG_GCJ])dnl
+AC_LANG_SAVE
+
+# Source file extension for Java test sources.
+ac_ext=java
+
+# Object file extension for compiled Java test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="class foo {}"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }'
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_TAG_COMPILER
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+# Allow CC to be a program name with arguments.
+lt_save_CC=$CC
+lt_save_CFLAGS=$CFLAGS
+lt_save_GCC=$GCC
+GCC=yes
+CC=${GCJ-"gcj"}
+CFLAGS=$GCJFLAGS
+compiler=$CC
+_LT_TAGVAR(compiler, $1)=$CC
+_LT_TAGVAR(LD, $1)="$LD"
+_LT_CC_BASENAME([$compiler])
+
+# GCJ did not exist at the time GCC didn't implicitly link libc in.
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+
+if test -n "$compiler"; then
+ _LT_COMPILER_NO_RTTI($1)
+ _LT_COMPILER_PIC($1)
+ _LT_COMPILER_C_O($1)
+ _LT_COMPILER_FILE_LOCKS($1)
+ _LT_LINKER_SHLIBS($1)
+ _LT_LINKER_HARDCODE_LIBPATH($1)
+
+ _LT_CONFIG($1)
+fi
+
+AC_LANG_RESTORE
+
+GCC=$lt_save_GCC
+CC=$lt_save_CC
+CFLAGS=$lt_save_CFLAGS
+])# _LT_LANG_GCJ_CONFIG
+
+
+# _LT_LANG_GO_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for the GNU Go compiler
+# are suitably defined. These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_GO_CONFIG],
+[AC_REQUIRE([LT_PROG_GO])dnl
+AC_LANG_SAVE
+
+# Source file extension for Go test sources.
+ac_ext=go
+
+# Object file extension for compiled Go test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="package main; func main() { }"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='package main; func main() { }'
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_TAG_COMPILER
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+# Allow CC to be a program name with arguments.
+lt_save_CC=$CC
+lt_save_CFLAGS=$CFLAGS
+lt_save_GCC=$GCC
+GCC=yes
+CC=${GOC-"gccgo"}
+CFLAGS=$GOFLAGS
+compiler=$CC
+_LT_TAGVAR(compiler, $1)=$CC
+_LT_TAGVAR(LD, $1)="$LD"
+_LT_CC_BASENAME([$compiler])
+
+# Go did not exist at the time GCC didn't implicitly link libc in.
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+
+if test -n "$compiler"; then
+ _LT_COMPILER_NO_RTTI($1)
+ _LT_COMPILER_PIC($1)
+ _LT_COMPILER_C_O($1)
+ _LT_COMPILER_FILE_LOCKS($1)
+ _LT_LINKER_SHLIBS($1)
+ _LT_LINKER_HARDCODE_LIBPATH($1)
+
+ _LT_CONFIG($1)
+fi
+
+AC_LANG_RESTORE
+
+GCC=$lt_save_GCC
+CC=$lt_save_CC
+CFLAGS=$lt_save_CFLAGS
+])# _LT_LANG_GO_CONFIG
+
+
+# _LT_LANG_RC_CONFIG([TAG])
+# -------------------------
+# Ensure that the configuration variables for the Windows resource compiler
+# are suitably defined. These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_RC_CONFIG],
+[AC_REQUIRE([LT_PROG_RC])dnl
+AC_LANG_SAVE
+
+# Source file extension for RC test sources.
+ac_ext=rc
+
+# Object file extension for compiled RC test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
+
+# Code to be used in simple link tests
+lt_simple_link_test_code="$lt_simple_compile_test_code"
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_TAG_COMPILER
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+# Allow CC to be a program name with arguments.
+lt_save_CC="$CC"
+lt_save_CFLAGS=$CFLAGS
+lt_save_GCC=$GCC
+GCC=
+CC=${RC-"windres"}
+CFLAGS=
+compiler=$CC
+_LT_TAGVAR(compiler, $1)=$CC
+_LT_CC_BASENAME([$compiler])
+_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
+
+if test -n "$compiler"; then
+ :
+ _LT_CONFIG($1)
+fi
+
+GCC=$lt_save_GCC
+AC_LANG_RESTORE
+CC=$lt_save_CC
+CFLAGS=$lt_save_CFLAGS
+])# _LT_LANG_RC_CONFIG
+
+
+# LT_PROG_GCJ
+# -----------
+AC_DEFUN([LT_PROG_GCJ],
+[m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ],
+ [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ],
+ [AC_CHECK_TOOL(GCJ, gcj,)
+ test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
+ AC_SUBST(GCJFLAGS)])])[]dnl
+])
+
+# Old name:
+AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([LT_AC_PROG_GCJ], [])
+
+
+# LT_PROG_GO
+# ----------
+AC_DEFUN([LT_PROG_GO],
+[AC_CHECK_TOOL(GOC, gccgo,)
+])
+
+
+# LT_PROG_RC
+# ----------
+AC_DEFUN([LT_PROG_RC],
+[AC_CHECK_TOOL(RC, windres,)
+])
+
+# Old name:
+AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([LT_AC_PROG_RC], [])
+
+
+# _LT_DECL_EGREP
+# --------------
+# If we don't have a new enough Autoconf to choose the best grep
+# available, choose the one first in the user's PATH.
+m4_defun([_LT_DECL_EGREP],
+[AC_REQUIRE([AC_PROG_EGREP])dnl
+AC_REQUIRE([AC_PROG_FGREP])dnl
+test -z "$GREP" && GREP=grep
+_LT_DECL([], [GREP], [1], [A grep program that handles long lines])
+_LT_DECL([], [EGREP], [1], [An ERE matcher])
+_LT_DECL([], [FGREP], [1], [A literal string matcher])
+dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too
+AC_SUBST([GREP])
+])
+
+
+# _LT_DECL_OBJDUMP
+# --------------
+# If we don't have a new enough Autoconf to choose the best objdump
+# available, choose the one first in the user's PATH.
+m4_defun([_LT_DECL_OBJDUMP],
+[AC_CHECK_TOOL(OBJDUMP, objdump, false)
+test -z "$OBJDUMP" && OBJDUMP=objdump
+_LT_DECL([], [OBJDUMP], [1], [An object symbol dumper])
+AC_SUBST([OBJDUMP])
+])
+
+# _LT_DECL_DLLTOOL
+# ----------------
+# Ensure DLLTOOL variable is set.
+m4_defun([_LT_DECL_DLLTOOL],
+[AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+_LT_DECL([], [DLLTOOL], [1], [DLL creation program])
+AC_SUBST([DLLTOOL])
+])
+
+# _LT_DECL_SED
+# ------------
+# Check for a fully-functional sed program, that truncates
+# as few characters as possible. Prefer GNU sed if found.
+m4_defun([_LT_DECL_SED],
+[AC_PROG_SED
+test -z "$SED" && SED=sed
+Xsed="$SED -e 1s/^X//"
+_LT_DECL([], [SED], [1], [A sed program that does not truncate output])
+_LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"],
+ [Sed that helps us avoid accidentally triggering echo(1) options like -n])
+])# _LT_DECL_SED
+
+m4_ifndef([AC_PROG_SED], [
+# NOTE: This macro has been submitted for inclusion into #
+# GNU Autoconf as AC_PROG_SED. When it is available in #
+# a released version of Autoconf we should remove this #
+# macro and use it instead. #
+
+m4_defun([AC_PROG_SED],
+[AC_MSG_CHECKING([for a sed that does not truncate output])
+AC_CACHE_VAL(lt_cv_path_SED,
+[# Loop through the user's path and test for sed and gsed.
+# Then use that list of sed's as ones to test for truncation.
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for lt_ac_prog in sed gsed; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
+ lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
+ fi
+ done
+ done
+done
+IFS=$as_save_IFS
+lt_ac_max=0
+lt_ac_count=0
+# Add /usr/xpg4/bin/sed as it is typically found on Solaris
+# along with /bin/sed that truncates output.
+for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
+ test ! -f $lt_ac_sed && continue
+ cat /dev/null > conftest.in
+ lt_ac_count=0
+ echo $ECHO_N "0123456789$ECHO_C" >conftest.in
+ # Check for GNU sed and select it if it is found.
+ if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
+ lt_cv_path_SED=$lt_ac_sed
+ break
+ fi
+ while true; do
+ cat conftest.in conftest.in >conftest.tmp
+ mv conftest.tmp conftest.in
+ cp conftest.in conftest.nl
+ echo >>conftest.nl
+ $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
+ cmp -s conftest.out conftest.nl || break
+ # 10000 chars as input seems more than enough
+ test $lt_ac_count -gt 10 && break
+ lt_ac_count=`expr $lt_ac_count + 1`
+ if test $lt_ac_count -gt $lt_ac_max; then
+ lt_ac_max=$lt_ac_count
+ lt_cv_path_SED=$lt_ac_sed
+ fi
+ done
+done
+])
+SED=$lt_cv_path_SED
+AC_SUBST([SED])
+AC_MSG_RESULT([$SED])
+])#AC_PROG_SED
+])#m4_ifndef
+
+# Old name:
+AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([LT_AC_PROG_SED], [])
+
+
+# _LT_CHECK_SHELL_FEATURES
+# ------------------------
+# Find out whether the shell is Bourne or XSI compatible,
+# or has some other useful features.
+m4_defun([_LT_CHECK_SHELL_FEATURES],
+[AC_MSG_CHECKING([whether the shell understands some XSI constructs])
+# Try some XSI features
+xsi_shell=no
+( _lt_dummy="a/b/c"
+ test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \
+ = c,a/b,b/c, \
+ && eval 'test $(( 1 + 1 )) -eq 2 \
+ && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
+ && xsi_shell=yes
+AC_MSG_RESULT([$xsi_shell])
+_LT_CONFIG_LIBTOOL_INIT([xsi_shell='$xsi_shell'])
+
+AC_MSG_CHECKING([whether the shell understands "+="])
+lt_shell_append=no
+( foo=bar; set foo baz; eval "$[1]+=\$[2]" && test "$foo" = barbaz ) \
+ >/dev/null 2>&1 \
+ && lt_shell_append=yes
+AC_MSG_RESULT([$lt_shell_append])
+_LT_CONFIG_LIBTOOL_INIT([lt_shell_append='$lt_shell_append'])
+
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+ lt_unset=unset
+else
+ lt_unset=false
+fi
+_LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl
+
+# test EBCDIC or ASCII
+case `echo X|tr X '\101'` in
+ A) # ASCII based system
+ # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
+ lt_SP2NL='tr \040 \012'
+ lt_NL2SP='tr \015\012 \040\040'
+ ;;
+ *) # EBCDIC based system
+ lt_SP2NL='tr \100 \n'
+ lt_NL2SP='tr \r\n \100\100'
+ ;;
+esac
+_LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl
+_LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl
+])# _LT_CHECK_SHELL_FEATURES
+
+
+# _LT_PROG_FUNCTION_REPLACE (FUNCNAME, REPLACEMENT-BODY)
+# ------------------------------------------------------
+# In `$cfgfile', look for function FUNCNAME delimited by `^FUNCNAME ()$' and
+# '^} FUNCNAME ', and replace its body with REPLACEMENT-BODY.
+m4_defun([_LT_PROG_FUNCTION_REPLACE],
+[dnl {
+sed -e '/^$1 ()$/,/^} # $1 /c\
+$1 ()\
+{\
+m4_bpatsubsts([$2], [$], [\\], [^\([ ]\)], [\\\1])
+} # Extended-shell $1 implementation' "$cfgfile" > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+])
+
+
+# _LT_PROG_REPLACE_SHELLFNS
+# -------------------------
+# Replace existing portable implementations of several shell functions with
+# equivalent extended shell implementations where those features are available..
+m4_defun([_LT_PROG_REPLACE_SHELLFNS],
+[if test x"$xsi_shell" = xyes; then
+ _LT_PROG_FUNCTION_REPLACE([func_dirname], [dnl
+ case ${1} in
+ */*) func_dirname_result="${1%/*}${2}" ;;
+ * ) func_dirname_result="${3}" ;;
+ esac])
+
+ _LT_PROG_FUNCTION_REPLACE([func_basename], [dnl
+ func_basename_result="${1##*/}"])
+
+ _LT_PROG_FUNCTION_REPLACE([func_dirname_and_basename], [dnl
+ case ${1} in
+ */*) func_dirname_result="${1%/*}${2}" ;;
+ * ) func_dirname_result="${3}" ;;
+ esac
+ func_basename_result="${1##*/}"])
+
+ _LT_PROG_FUNCTION_REPLACE([func_stripname], [dnl
+ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
+ # positional parameters, so assign one to ordinary parameter first.
+ func_stripname_result=${3}
+ func_stripname_result=${func_stripname_result#"${1}"}
+ func_stripname_result=${func_stripname_result%"${2}"}])
+
+ _LT_PROG_FUNCTION_REPLACE([func_split_long_opt], [dnl
+ func_split_long_opt_name=${1%%=*}
+ func_split_long_opt_arg=${1#*=}])
+
+ _LT_PROG_FUNCTION_REPLACE([func_split_short_opt], [dnl
+ func_split_short_opt_arg=${1#??}
+ func_split_short_opt_name=${1%"$func_split_short_opt_arg"}])
+
+ _LT_PROG_FUNCTION_REPLACE([func_lo2o], [dnl
+ case ${1} in
+ *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
+ *) func_lo2o_result=${1} ;;
+ esac])
+
+ _LT_PROG_FUNCTION_REPLACE([func_xform], [ func_xform_result=${1%.*}.lo])
+
+ _LT_PROG_FUNCTION_REPLACE([func_arith], [ func_arith_result=$(( $[*] ))])
+
+ _LT_PROG_FUNCTION_REPLACE([func_len], [ func_len_result=${#1}])
+fi
+
+if test x"$lt_shell_append" = xyes; then
+ _LT_PROG_FUNCTION_REPLACE([func_append], [ eval "${1}+=\\${2}"])
+
+ _LT_PROG_FUNCTION_REPLACE([func_append_quoted], [dnl
+ func_quote_for_eval "${2}"
+dnl m4 expansion turns \\\\ into \\, and then the shell eval turns that into \
+ eval "${1}+=\\\\ \\$func_quote_for_eval_result"])
+
+ # Save a `func_append' function call where possible by direct use of '+='
+ sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+ test 0 -eq $? || _lt_function_replace_fail=:
+else
+ # Save a `func_append' function call even when '+=' is not available
+ sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+ test 0 -eq $? || _lt_function_replace_fail=:
+fi
+
+if test x"$_lt_function_replace_fail" = x":"; then
+ AC_MSG_WARN([Unable to substitute extended shell functions in $ofile])
+fi
+])
+
+# _LT_PATH_CONVERSION_FUNCTIONS
+# -----------------------------
+# Determine which file name conversion functions should be used by
+# func_to_host_file (and, implicitly, by func_to_host_path). These are needed
+# for certain cross-compile configurations and native mingw.
+m4_defun([_LT_PATH_CONVERSION_FUNCTIONS],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+AC_MSG_CHECKING([how to convert $build file names to $host format])
+AC_CACHE_VAL(lt_cv_to_host_file_cmd,
+[case $host in
+ *-*-mingw* )
+ case $build in
+ *-*-mingw* ) # actually msys
+ lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32
+ ;;
+ *-*-cygwin* )
+ lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32
+ ;;
+ * ) # otherwise, assume *nix
+ lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32
+ ;;
+ esac
+ ;;
+ *-*-cygwin* )
+ case $build in
+ *-*-mingw* ) # actually msys
+ lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin
+ ;;
+ *-*-cygwin* )
+ lt_cv_to_host_file_cmd=func_convert_file_noop
+ ;;
+ * ) # otherwise, assume *nix
+ lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin
+ ;;
+ esac
+ ;;
+ * ) # unhandled hosts (and "normal" native builds)
+ lt_cv_to_host_file_cmd=func_convert_file_noop
+ ;;
+esac
+])
+to_host_file_cmd=$lt_cv_to_host_file_cmd
+AC_MSG_RESULT([$lt_cv_to_host_file_cmd])
+_LT_DECL([to_host_file_cmd], [lt_cv_to_host_file_cmd],
+ [0], [convert $build file names to $host format])dnl
+
+AC_MSG_CHECKING([how to convert $build file names to toolchain format])
+AC_CACHE_VAL(lt_cv_to_tool_file_cmd,
+[#assume ordinary cross tools, or native build.
+lt_cv_to_tool_file_cmd=func_convert_file_noop
+case $host in
+ *-*-mingw* )
+ case $build in
+ *-*-mingw* ) # actually msys
+ lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32
+ ;;
+ esac
+ ;;
+esac
+])
+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
+AC_MSG_RESULT([$lt_cv_to_tool_file_cmd])
+_LT_DECL([to_tool_file_cmd], [lt_cv_to_tool_file_cmd],
+ [0], [convert $build files to toolchain format])dnl
+])# _LT_PATH_CONVERSION_FUNCTIONS
+
+# Helper functions for option handling. -*- Autoconf -*-
+#
+# Copyright (C) 2004, 2005, 2007, 2008, 2009 Free Software Foundation,
+# Inc.
+# Written by Gary V. Vaughan, 2004
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+# serial 7 ltoptions.m4
+
+# This is to help aclocal find these macros, as it can't see m4_define.
+AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])])
+
+
+# _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME)
+# ------------------------------------------
+m4_define([_LT_MANGLE_OPTION],
+[[_LT_OPTION_]m4_bpatsubst($1__$2, [[^a-zA-Z0-9_]], [_])])
+
+
+# _LT_SET_OPTION(MACRO-NAME, OPTION-NAME)
+# ---------------------------------------
+# Set option OPTION-NAME for macro MACRO-NAME, and if there is a
+# matching handler defined, dispatch to it. Other OPTION-NAMEs are
+# saved as a flag.
+m4_define([_LT_SET_OPTION],
+[m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl
+m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]),
+ _LT_MANGLE_DEFUN([$1], [$2]),
+ [m4_warning([Unknown $1 option `$2'])])[]dnl
+])
+
+
+# _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET])
+# ------------------------------------------------------------
+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+m4_define([_LT_IF_OPTION],
+[m4_ifdef(_LT_MANGLE_OPTION([$1], [$2]), [$3], [$4])])
+
+
+# _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET)
+# -------------------------------------------------------
+# Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME
+# are set.
+m4_define([_LT_UNLESS_OPTIONS],
+[m4_foreach([_LT_Option], m4_split(m4_normalize([$2])),
+ [m4_ifdef(_LT_MANGLE_OPTION([$1], _LT_Option),
+ [m4_define([$0_found])])])[]dnl
+m4_ifdef([$0_found], [m4_undefine([$0_found])], [$3
+])[]dnl
+])
+
+
+# _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST)
+# ----------------------------------------
+# OPTION-LIST is a space-separated list of Libtool options associated
+# with MACRO-NAME. If any OPTION has a matching handler declared with
+# LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about
+# the unknown option and exit.
+m4_defun([_LT_SET_OPTIONS],
+[# Set options
+m4_foreach([_LT_Option], m4_split(m4_normalize([$2])),
+ [_LT_SET_OPTION([$1], _LT_Option)])
+
+m4_if([$1],[LT_INIT],[
+ dnl
+ dnl Simply set some default values (i.e off) if boolean options were not
+ dnl specified:
+ _LT_UNLESS_OPTIONS([LT_INIT], [dlopen], [enable_dlopen=no
+ ])
+ _LT_UNLESS_OPTIONS([LT_INIT], [win32-dll], [enable_win32_dll=no
+ ])
+ dnl
+ dnl If no reference was made to various pairs of opposing options, then
+ dnl we run the default mode handler for the pair. For example, if neither
+ dnl `shared' nor `disable-shared' was passed, we enable building of shared
+ dnl archives by default:
+ _LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED])
+ _LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC])
+ _LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC])
+ _LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install],
+ [_LT_ENABLE_FAST_INSTALL])
+ ])
+])# _LT_SET_OPTIONS
+
+
+
+# _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME)
+# -----------------------------------------
+m4_define([_LT_MANGLE_DEFUN],
+[[_LT_OPTION_DEFUN_]m4_bpatsubst(m4_toupper([$1__$2]), [[^A-Z0-9_]], [_])])
+
+
+# LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE)
+# -----------------------------------------------
+m4_define([LT_OPTION_DEFINE],
+[m4_define(_LT_MANGLE_DEFUN([$1], [$2]), [$3])[]dnl
+])# LT_OPTION_DEFINE
+
+
+# dlopen
+# ------
+LT_OPTION_DEFINE([LT_INIT], [dlopen], [enable_dlopen=yes
+])
+
+AU_DEFUN([AC_LIBTOOL_DLOPEN],
+[_LT_SET_OPTION([LT_INIT], [dlopen])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you
+put the `dlopen' option into LT_INIT's first parameter.])
+])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_DLOPEN], [])
+
+
+# win32-dll
+# ---------
+# Declare package support for building win32 dll's.
+LT_OPTION_DEFINE([LT_INIT], [win32-dll],
+[enable_win32_dll=yes
+
+case $host in
+*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*)
+ AC_CHECK_TOOL(AS, as, false)
+ AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+ AC_CHECK_TOOL(OBJDUMP, objdump, false)
+ ;;
+esac
+
+test -z "$AS" && AS=as
+_LT_DECL([], [AS], [1], [Assembler program])dnl
+
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+_LT_DECL([], [DLLTOOL], [1], [DLL creation program])dnl
+
+test -z "$OBJDUMP" && OBJDUMP=objdump
+_LT_DECL([], [OBJDUMP], [1], [Object dumper program])dnl
+])# win32-dll
+
+AU_DEFUN([AC_LIBTOOL_WIN32_DLL],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+_LT_SET_OPTION([LT_INIT], [win32-dll])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you
+put the `win32-dll' option into LT_INIT's first parameter.])
+])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [])
+
+
+# _LT_ENABLE_SHARED([DEFAULT])
+# ----------------------------
+# implement the --enable-shared flag, and supports the `shared' and
+# `disable-shared' LT_INIT options.
+# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
+m4_define([_LT_ENABLE_SHARED],
+[m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl
+AC_ARG_ENABLE([shared],
+ [AS_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
+ [build shared libraries @<:@default=]_LT_ENABLE_SHARED_DEFAULT[@:>@])],
+ [p=${PACKAGE-default}
+ case $enableval in
+ yes) enable_shared=yes ;;
+ no) enable_shared=no ;;
+ *)
+ enable_shared=no
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ for pkg in $enableval; do
+ IFS="$lt_save_ifs"
+ if test "X$pkg" = "X$p"; then
+ enable_shared=yes
+ fi
+ done
+ IFS="$lt_save_ifs"
+ ;;
+ esac],
+ [enable_shared=]_LT_ENABLE_SHARED_DEFAULT)
+
+ _LT_DECL([build_libtool_libs], [enable_shared], [0],
+ [Whether or not to build shared libraries])
+])# _LT_ENABLE_SHARED
+
+LT_OPTION_DEFINE([LT_INIT], [shared], [_LT_ENABLE_SHARED([yes])])
+LT_OPTION_DEFINE([LT_INIT], [disable-shared], [_LT_ENABLE_SHARED([no])])
+
+# Old names:
+AC_DEFUN([AC_ENABLE_SHARED],
+[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared])
+])
+
+AC_DEFUN([AC_DISABLE_SHARED],
+[_LT_SET_OPTION([LT_INIT], [disable-shared])
+])
+
+AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)])
+AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_ENABLE_SHARED], [])
+dnl AC_DEFUN([AM_DISABLE_SHARED], [])
+
+
+
+# _LT_ENABLE_STATIC([DEFAULT])
+# ----------------------------
+# implement the --enable-static flag, and support the `static' and
+# `disable-static' LT_INIT options.
+# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
+m4_define([_LT_ENABLE_STATIC],
+[m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl
+AC_ARG_ENABLE([static],
+ [AS_HELP_STRING([--enable-static@<:@=PKGS@:>@],
+ [build static libraries @<:@default=]_LT_ENABLE_STATIC_DEFAULT[@:>@])],
+ [p=${PACKAGE-default}
+ case $enableval in
+ yes) enable_static=yes ;;
+ no) enable_static=no ;;
+ *)
+ enable_static=no
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ for pkg in $enableval; do
+ IFS="$lt_save_ifs"
+ if test "X$pkg" = "X$p"; then
+ enable_static=yes
+ fi
+ done
+ IFS="$lt_save_ifs"
+ ;;
+ esac],
+ [enable_static=]_LT_ENABLE_STATIC_DEFAULT)
+
+ _LT_DECL([build_old_libs], [enable_static], [0],
+ [Whether or not to build static libraries])
+])# _LT_ENABLE_STATIC
+
+LT_OPTION_DEFINE([LT_INIT], [static], [_LT_ENABLE_STATIC([yes])])
+LT_OPTION_DEFINE([LT_INIT], [disable-static], [_LT_ENABLE_STATIC([no])])
+
+# Old names:
+AC_DEFUN([AC_ENABLE_STATIC],
+[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static])
+])
+
+AC_DEFUN([AC_DISABLE_STATIC],
+[_LT_SET_OPTION([LT_INIT], [disable-static])
+])
+
+AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)])
+AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_ENABLE_STATIC], [])
+dnl AC_DEFUN([AM_DISABLE_STATIC], [])
+
+
+
+# _LT_ENABLE_FAST_INSTALL([DEFAULT])
+# ----------------------------------
+# implement the --enable-fast-install flag, and support the `fast-install'
+# and `disable-fast-install' LT_INIT options.
+# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
+m4_define([_LT_ENABLE_FAST_INSTALL],
+[m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl
+AC_ARG_ENABLE([fast-install],
+ [AS_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
+ [optimize for fast installation @<:@default=]_LT_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
+ [p=${PACKAGE-default}
+ case $enableval in
+ yes) enable_fast_install=yes ;;
+ no) enable_fast_install=no ;;
+ *)
+ enable_fast_install=no
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ for pkg in $enableval; do
+ IFS="$lt_save_ifs"
+ if test "X$pkg" = "X$p"; then
+ enable_fast_install=yes
+ fi
+ done
+ IFS="$lt_save_ifs"
+ ;;
+ esac],
+ [enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT)
+
+_LT_DECL([fast_install], [enable_fast_install], [0],
+ [Whether or not to optimize for fast installation])dnl
+])# _LT_ENABLE_FAST_INSTALL
+
+LT_OPTION_DEFINE([LT_INIT], [fast-install], [_LT_ENABLE_FAST_INSTALL([yes])])
+LT_OPTION_DEFINE([LT_INIT], [disable-fast-install], [_LT_ENABLE_FAST_INSTALL([no])])
+
+# Old names:
+AU_DEFUN([AC_ENABLE_FAST_INSTALL],
+[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you put
+the `fast-install' option into LT_INIT's first parameter.])
+])
+
+AU_DEFUN([AC_DISABLE_FAST_INSTALL],
+[_LT_SET_OPTION([LT_INIT], [disable-fast-install])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you put
+the `disable-fast-install' option into LT_INIT's first parameter.])
+])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_ENABLE_FAST_INSTALL], [])
+dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], [])
+
+
+# _LT_WITH_PIC([MODE])
+# --------------------
+# implement the --with-pic flag, and support the `pic-only' and `no-pic'
+# LT_INIT options.
+# MODE is either `yes' or `no'. If omitted, it defaults to `both'.
+m4_define([_LT_WITH_PIC],
+[AC_ARG_WITH([pic],
+ [AS_HELP_STRING([--with-pic@<:@=PKGS@:>@],
+ [try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
+ [lt_p=${PACKAGE-default}
+ case $withval in
+ yes|no) pic_mode=$withval ;;
+ *)
+ pic_mode=default
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ for lt_pkg in $withval; do
+ IFS="$lt_save_ifs"
+ if test "X$lt_pkg" = "X$lt_p"; then
+ pic_mode=yes
+ fi
+ done
+ IFS="$lt_save_ifs"
+ ;;
+ esac],
+ [pic_mode=default])
+
+test -z "$pic_mode" && pic_mode=m4_default([$1], [default])
+
+_LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl
+])# _LT_WITH_PIC
+
+LT_OPTION_DEFINE([LT_INIT], [pic-only], [_LT_WITH_PIC([yes])])
+LT_OPTION_DEFINE([LT_INIT], [no-pic], [_LT_WITH_PIC([no])])
+
+# Old name:
+AU_DEFUN([AC_LIBTOOL_PICMODE],
+[_LT_SET_OPTION([LT_INIT], [pic-only])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you
+put the `pic-only' option into LT_INIT's first parameter.])
+])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_PICMODE], [])
+
+
+m4_define([_LTDL_MODE], [])
+LT_OPTION_DEFINE([LTDL_INIT], [nonrecursive],
+ [m4_define([_LTDL_MODE], [nonrecursive])])
+LT_OPTION_DEFINE([LTDL_INIT], [recursive],
+ [m4_define([_LTDL_MODE], [recursive])])
+LT_OPTION_DEFINE([LTDL_INIT], [subproject],
+ [m4_define([_LTDL_MODE], [subproject])])
+
+m4_define([_LTDL_TYPE], [])
+LT_OPTION_DEFINE([LTDL_INIT], [installable],
+ [m4_define([_LTDL_TYPE], [installable])])
+LT_OPTION_DEFINE([LTDL_INIT], [convenience],
+ [m4_define([_LTDL_TYPE], [convenience])])
+
+# ltsugar.m4 -- libtool m4 base layer. -*-Autoconf-*-
+#
+# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc.
+# Written by Gary V. Vaughan, 2004
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+# serial 6 ltsugar.m4
+
+# This is to help aclocal find these macros, as it can't see m4_define.
+AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])])
+
+
+# lt_join(SEP, ARG1, [ARG2...])
+# -----------------------------
+# Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their
+# associated separator.
+# Needed until we can rely on m4_join from Autoconf 2.62, since all earlier
+# versions in m4sugar had bugs.
+m4_define([lt_join],
+[m4_if([$#], [1], [],
+ [$#], [2], [[$2]],
+ [m4_if([$2], [], [], [[$2]_])$0([$1], m4_shift(m4_shift($@)))])])
+m4_define([_lt_join],
+[m4_if([$#$2], [2], [],
+ [m4_if([$2], [], [], [[$1$2]])$0([$1], m4_shift(m4_shift($@)))])])
+
+
+# lt_car(LIST)
+# lt_cdr(LIST)
+# ------------
+# Manipulate m4 lists.
+# These macros are necessary as long as will still need to support
+# Autoconf-2.59 which quotes differently.
+m4_define([lt_car], [[$1]])
+m4_define([lt_cdr],
+[m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])],
+ [$#], 1, [],
+ [m4_dquote(m4_shift($@))])])
+m4_define([lt_unquote], $1)
+
+
+# lt_append(MACRO-NAME, STRING, [SEPARATOR])
+# ------------------------------------------
+# Redefine MACRO-NAME to hold its former content plus `SEPARATOR'`STRING'.
+# Note that neither SEPARATOR nor STRING are expanded; they are appended
+# to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked).
+# No SEPARATOR is output if MACRO-NAME was previously undefined (different
+# than defined and empty).
+#
+# This macro is needed until we can rely on Autoconf 2.62, since earlier
+# versions of m4sugar mistakenly expanded SEPARATOR but not STRING.
+m4_define([lt_append],
+[m4_define([$1],
+ m4_ifdef([$1], [m4_defn([$1])[$3]])[$2])])
+
+
+
+# lt_combine(SEP, PREFIX-LIST, INFIX, SUFFIX1, [SUFFIX2...])
+# ----------------------------------------------------------
+# Produce a SEP delimited list of all paired combinations of elements of
+# PREFIX-LIST with SUFFIX1 through SUFFIXn. Each element of the list
+# has the form PREFIXmINFIXSUFFIXn.
+# Needed until we can rely on m4_combine added in Autoconf 2.62.
+m4_define([lt_combine],
+[m4_if(m4_eval([$# > 3]), [1],
+ [m4_pushdef([_Lt_sep], [m4_define([_Lt_sep], m4_defn([lt_car]))])]]dnl
+[[m4_foreach([_Lt_prefix], [$2],
+ [m4_foreach([_Lt_suffix],
+ ]m4_dquote(m4_dquote(m4_shift(m4_shift(m4_shift($@)))))[,
+ [_Lt_sep([$1])[]m4_defn([_Lt_prefix])[$3]m4_defn([_Lt_suffix])])])])])
+
+
+# lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ])
+# -----------------------------------------------------------------------
+# Iff MACRO-NAME does not yet contain VARNAME, then append it (delimited
+# by SEPARATOR if supplied) and expand UNIQ, else NOT-UNIQ.
+m4_define([lt_if_append_uniq],
+[m4_ifdef([$1],
+ [m4_if(m4_index([$3]m4_defn([$1])[$3], [$3$2$3]), [-1],
+ [lt_append([$1], [$2], [$3])$4],
+ [$5])],
+ [lt_append([$1], [$2], [$3])$4])])
+
+
+# lt_dict_add(DICT, KEY, VALUE)
+# -----------------------------
+m4_define([lt_dict_add],
+[m4_define([$1($2)], [$3])])
+
+
+# lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE)
+# --------------------------------------------
+m4_define([lt_dict_add_subkey],
+[m4_define([$1($2:$3)], [$4])])
+
+
+# lt_dict_fetch(DICT, KEY, [SUBKEY])
+# ----------------------------------
+m4_define([lt_dict_fetch],
+[m4_ifval([$3],
+ m4_ifdef([$1($2:$3)], [m4_defn([$1($2:$3)])]),
+ m4_ifdef([$1($2)], [m4_defn([$1($2)])]))])
+
+
+# lt_if_dict_fetch(DICT, KEY, [SUBKEY], VALUE, IF-TRUE, [IF-FALSE])
+# -----------------------------------------------------------------
+m4_define([lt_if_dict_fetch],
+[m4_if(lt_dict_fetch([$1], [$2], [$3]), [$4],
+ [$5],
+ [$6])])
+
+
+# lt_dict_filter(DICT, [SUBKEY], VALUE, [SEPARATOR], KEY, [...])
+# --------------------------------------------------------------
+m4_define([lt_dict_filter],
+[m4_if([$5], [], [],
+ [lt_join(m4_quote(m4_default([$4], [[, ]])),
+ lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_key, lt_car([m4_shiftn(4, $@)]),
+ [lt_if_dict_fetch([$1], _Lt_key, [$2], [$3], [_Lt_key ])])))))])[]dnl
+])
+
+# ltversion.m4 -- version numbers -*- Autoconf -*-
+#
+# Copyright (C) 2004 Free Software Foundation, Inc.
+# Written by Scott James Remnant, 2004
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+# @configure_input@
+
+# serial 3337 ltversion.m4
+# This file is part of GNU Libtool
+
+m4_define([LT_PACKAGE_VERSION], [2.4.2])
+m4_define([LT_PACKAGE_REVISION], [1.3337])
+
+AC_DEFUN([LTVERSION_VERSION],
+[macro_version='2.4.2'
+macro_revision='1.3337'
+_LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?])
+_LT_DECL(, macro_revision, 0)
+])
+
+# lt~obsolete.m4 -- aclocal satisfying obsolete definitions. -*-Autoconf-*-
+#
+# Copyright (C) 2004, 2005, 2007, 2009 Free Software Foundation, Inc.
+# Written by Scott James Remnant, 2004.
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+# serial 5 lt~obsolete.m4
+
+# These exist entirely to fool aclocal when bootstrapping libtool.
+#
+# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN)
+# which have later been changed to m4_define as they aren't part of the
+# exported API, or moved to Autoconf or Automake where they belong.
+#
+# The trouble is, aclocal is a bit thick. It'll see the old AC_DEFUN
+# in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us
+# using a macro with the same name in our local m4/libtool.m4 it'll
+# pull the old libtool.m4 in (it doesn't see our shiny new m4_define
+# and doesn't know about Autoconf macros at all.)
+#
+# So we provide this file, which has a silly filename so it's always
+# included after everything else. This provides aclocal with the
+# AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything
+# because those macros already exist, or will be overwritten later.
+# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6.
+#
+# Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here.
+# Yes, that means every name once taken will need to remain here until
+# we give up compatibility with versions before 1.7, at which point
+# we need to keep only those names which we still refer to.
+
+# This is to help aclocal find these macros, as it can't see m4_define.
+AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])])
+
+m4_ifndef([AC_LIBTOOL_LINKER_OPTION], [AC_DEFUN([AC_LIBTOOL_LINKER_OPTION])])
+m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP])])
+m4_ifndef([_LT_AC_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH])])
+m4_ifndef([_LT_AC_SHELL_INIT], [AC_DEFUN([_LT_AC_SHELL_INIT])])
+m4_ifndef([_LT_AC_SYS_LIBPATH_AIX], [AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX])])
+m4_ifndef([_LT_PROG_LTMAIN], [AC_DEFUN([_LT_PROG_LTMAIN])])
+m4_ifndef([_LT_AC_TAGVAR], [AC_DEFUN([_LT_AC_TAGVAR])])
+m4_ifndef([AC_LTDL_ENABLE_INSTALL], [AC_DEFUN([AC_LTDL_ENABLE_INSTALL])])
+m4_ifndef([AC_LTDL_PREOPEN], [AC_DEFUN([AC_LTDL_PREOPEN])])
+m4_ifndef([_LT_AC_SYS_COMPILER], [AC_DEFUN([_LT_AC_SYS_COMPILER])])
+m4_ifndef([_LT_AC_LOCK], [AC_DEFUN([_LT_AC_LOCK])])
+m4_ifndef([AC_LIBTOOL_SYS_OLD_ARCHIVE], [AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE])])
+m4_ifndef([_LT_AC_TRY_DLOPEN_SELF], [AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF])])
+m4_ifndef([AC_LIBTOOL_PROG_CC_C_O], [AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O])])
+m4_ifndef([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS])])
+m4_ifndef([AC_LIBTOOL_OBJDIR], [AC_DEFUN([AC_LIBTOOL_OBJDIR])])
+m4_ifndef([AC_LTDL_OBJDIR], [AC_DEFUN([AC_LTDL_OBJDIR])])
+m4_ifndef([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH])])
+m4_ifndef([AC_LIBTOOL_SYS_LIB_STRIP], [AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP])])
+m4_ifndef([AC_PATH_MAGIC], [AC_DEFUN([AC_PATH_MAGIC])])
+m4_ifndef([AC_PROG_LD_GNU], [AC_DEFUN([AC_PROG_LD_GNU])])
+m4_ifndef([AC_PROG_LD_RELOAD_FLAG], [AC_DEFUN([AC_PROG_LD_RELOAD_FLAG])])
+m4_ifndef([AC_DEPLIBS_CHECK_METHOD], [AC_DEFUN([AC_DEPLIBS_CHECK_METHOD])])
+m4_ifndef([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI])])
+m4_ifndef([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])])
+m4_ifndef([AC_LIBTOOL_PROG_COMPILER_PIC], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC])])
+m4_ifndef([AC_LIBTOOL_PROG_LD_SHLIBS], [AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS])])
+m4_ifndef([AC_LIBTOOL_POSTDEP_PREDEP], [AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP])])
+m4_ifndef([LT_AC_PROG_EGREP], [AC_DEFUN([LT_AC_PROG_EGREP])])
+m4_ifndef([LT_AC_PROG_SED], [AC_DEFUN([LT_AC_PROG_SED])])
+m4_ifndef([_LT_CC_BASENAME], [AC_DEFUN([_LT_CC_BASENAME])])
+m4_ifndef([_LT_COMPILER_BOILERPLATE], [AC_DEFUN([_LT_COMPILER_BOILERPLATE])])
+m4_ifndef([_LT_LINKER_BOILERPLATE], [AC_DEFUN([_LT_LINKER_BOILERPLATE])])
+m4_ifndef([_AC_PROG_LIBTOOL], [AC_DEFUN([_AC_PROG_LIBTOOL])])
+m4_ifndef([AC_LIBTOOL_SETUP], [AC_DEFUN([AC_LIBTOOL_SETUP])])
+m4_ifndef([_LT_AC_CHECK_DLFCN], [AC_DEFUN([_LT_AC_CHECK_DLFCN])])
+m4_ifndef([AC_LIBTOOL_SYS_DYNAMIC_LINKER], [AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER])])
+m4_ifndef([_LT_AC_TAGCONFIG], [AC_DEFUN([_LT_AC_TAGCONFIG])])
+m4_ifndef([AC_DISABLE_FAST_INSTALL], [AC_DEFUN([AC_DISABLE_FAST_INSTALL])])
+m4_ifndef([_LT_AC_LANG_CXX], [AC_DEFUN([_LT_AC_LANG_CXX])])
+m4_ifndef([_LT_AC_LANG_F77], [AC_DEFUN([_LT_AC_LANG_F77])])
+m4_ifndef([_LT_AC_LANG_GCJ], [AC_DEFUN([_LT_AC_LANG_GCJ])])
+m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])])
+m4_ifndef([_LT_AC_LANG_C_CONFIG], [AC_DEFUN([_LT_AC_LANG_C_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])])
+m4_ifndef([_LT_AC_LANG_CXX_CONFIG], [AC_DEFUN([_LT_AC_LANG_CXX_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_F77_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG])])
+m4_ifndef([_LT_AC_LANG_F77_CONFIG], [AC_DEFUN([_LT_AC_LANG_F77_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_GCJ_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG])])
+m4_ifndef([_LT_AC_LANG_GCJ_CONFIG], [AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])])
+m4_ifndef([_LT_AC_LANG_RC_CONFIG], [AC_DEFUN([_LT_AC_LANG_RC_CONFIG])])
+m4_ifndef([AC_LIBTOOL_CONFIG], [AC_DEFUN([AC_LIBTOOL_CONFIG])])
+m4_ifndef([_LT_AC_FILE_LTDLL_C], [AC_DEFUN([_LT_AC_FILE_LTDLL_C])])
+m4_ifndef([_LT_REQUIRED_DARWIN_CHECKS], [AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS])])
+m4_ifndef([_LT_AC_PROG_CXXCPP], [AC_DEFUN([_LT_AC_PROG_CXXCPP])])
+m4_ifndef([_LT_PREPARE_SED_QUOTE_VARS], [AC_DEFUN([_LT_PREPARE_SED_QUOTE_VARS])])
+m4_ifndef([_LT_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_PROG_ECHO_BACKSLASH])])
+m4_ifndef([_LT_PROG_F77], [AC_DEFUN([_LT_PROG_F77])])
+m4_ifndef([_LT_PROG_FC], [AC_DEFUN([_LT_PROG_FC])])
+m4_ifndef([_LT_PROG_CXX], [AC_DEFUN([_LT_PROG_CXX])])
+
+# Copyright (C) 2002-2012 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 8
+
+# AM_AUTOMAKE_VERSION(VERSION)
+# ----------------------------
+# Automake X.Y traces this macro to ensure aclocal.m4 has been
+# generated from the m4 files accompanying Automake X.Y.
+# (This private macro should not be called outside this file.)
+AC_DEFUN([AM_AUTOMAKE_VERSION],
+[am__api_version='1.12'
+dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
+dnl require some minimum version. Point them to the right macro.
+m4_if([$1], [1.12.2], [],
+ [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
+])
+
+# _AM_AUTOCONF_VERSION(VERSION)
+# -----------------------------
+# aclocal traces this macro to find the Autoconf version.
+# This is a private macro too. Using m4_define simplifies
+# the logic in aclocal, which can simply ignore this definition.
+m4_define([_AM_AUTOCONF_VERSION], [])
+
+# AM_SET_CURRENT_AUTOMAKE_VERSION
+# -------------------------------
+# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
+# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
+AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
+[AM_AUTOMAKE_VERSION([1.12.2])dnl
+m4_ifndef([AC_AUTOCONF_VERSION],
+ [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
+
+# AM_AUX_DIR_EXPAND -*- Autoconf -*-
+
+# Copyright (C) 2001-2012 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
+# $ac_aux_dir to '$srcdir/foo'. In other projects, it is set to
+# '$srcdir', '$srcdir/..', or '$srcdir/../..'.
+#
+# Of course, Automake must honor this variable whenever it calls a
+# tool from the auxiliary directory. The problem is that $srcdir (and
+# therefore $ac_aux_dir as well) can be either absolute or relative,
+# depending on how configure is run. This is pretty annoying, since
+# it makes $ac_aux_dir quite unusable in subdirectories: in the top
+# source directory, any form will work fine, but in subdirectories a
+# relative path needs to be adjusted first.
+#
+# $ac_aux_dir/missing
+# fails when called from a subdirectory if $ac_aux_dir is relative
+# $top_srcdir/$ac_aux_dir/missing
+# fails if $ac_aux_dir is absolute,
+# fails when called from a subdirectory in a VPATH build with
+# a relative $ac_aux_dir
+#
+# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
+# are both prefixed by $srcdir. In an in-source build this is usually
+# harmless because $srcdir is '.', but things will broke when you
+# start a VPATH build or use an absolute $srcdir.
+#
+# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
+# iff we strip the leading $srcdir from $ac_aux_dir. That would be:
+# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
+# and then we would define $MISSING as
+# MISSING="\${SHELL} $am_aux_dir/missing"
+# This will work as long as MISSING is not called from configure, because
+# unfortunately $(top_srcdir) has no meaning in configure.
+# However there are other variables, like CC, which are often used in
+# configure, and could therefore not use this "fixed" $ac_aux_dir.
+#
+# Another solution, used here, is to always expand $ac_aux_dir to an
+# absolute PATH. The drawback is that using absolute paths prevent a
+# configured tree to be moved without reconfiguration.
+
+AC_DEFUN([AM_AUX_DIR_EXPAND],
+[dnl Rely on autoconf to set up CDPATH properly.
+AC_PREREQ([2.50])dnl
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+])
+
+# AM_CONDITIONAL -*- Autoconf -*-
+
+# Copyright (C) 1997-2012 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 10
+
+# AM_CONDITIONAL(NAME, SHELL-CONDITION)
+# -------------------------------------
+# Define a conditional.
+AC_DEFUN([AM_CONDITIONAL],
+[AC_PREREQ([2.52])dnl
+ m4_if([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
+ [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
+AC_SUBST([$1_TRUE])dnl
+AC_SUBST([$1_FALSE])dnl
+_AM_SUBST_NOTMAKE([$1_TRUE])dnl
+_AM_SUBST_NOTMAKE([$1_FALSE])dnl
+m4_define([_AM_COND_VALUE_$1], [$2])dnl
+if $2; then
+ $1_TRUE=
+ $1_FALSE='#'
+else
+ $1_TRUE='#'
+ $1_FALSE=
+fi
+AC_CONFIG_COMMANDS_PRE(
+[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
+ AC_MSG_ERROR([[conditional "$1" was never defined.
+Usually this means the macro was only invoked conditionally.]])
+fi])])
+
+# Copyright (C) 1999-2012 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 17
+
+# There are a few dirty hacks below to avoid letting 'AC_PROG_CC' be
+# written in clear, in which case automake, when reading aclocal.m4,
+# will think it sees a *use*, and therefore will trigger all it's
+# C support machinery. Also note that it means that autoscan, seeing
+# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
+
+
+# _AM_DEPENDENCIES(NAME)
+# ----------------------
+# See how the compiler implements dependency checking.
+# NAME is "CC", "CXX", "OBJC", "OBJCXX", "UPC", or "GJC".
+# We try a few techniques and use that to set a single cache variable.
+#
+# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
+# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
+# dependency, and given that the user is not expected to run this macro,
+# just rely on AC_PROG_CC.
+AC_DEFUN([_AM_DEPENDENCIES],
+[AC_REQUIRE([AM_SET_DEPDIR])dnl
+AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
+AC_REQUIRE([AM_MAKE_INCLUDE])dnl
+AC_REQUIRE([AM_DEP_TRACK])dnl
+
+m4_if([$1], [CC], [depcc="$CC" am_compiler_list=],
+ [$1], [CXX], [depcc="$CXX" am_compiler_list=],
+ [$1], [OBJC], [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
+ [$1], [OBJCXX], [depcc="$OBJCXX" am_compiler_list='gcc3 gcc'],
+ [$1], [UPC], [depcc="$UPC" am_compiler_list=],
+ [$1], [GCJ], [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
+ [depcc="$$1" am_compiler_list=])
+
+AC_CACHE_CHECK([dependency style of $depcc],
+ [am_cv_$1_dependencies_compiler_type],
+[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+ # We make a subdir and do the tests there. Otherwise we can end up
+ # making bogus files that we don't know about and never remove. For
+ # instance it was reported that on HP-UX the gcc test will end up
+ # making a dummy file named 'D' -- because '-MD' means "put the output
+ # in D".
+ rm -rf conftest.dir
+ mkdir conftest.dir
+ # Copy depcomp to subdir because otherwise we won't find it if we're
+ # using a relative directory.
+ cp "$am_depcomp" conftest.dir
+ cd conftest.dir
+ # We will build objects and dependencies in a subdirectory because
+ # it helps to detect inapplicable dependency modes. For instance
+ # both Tru64's cc and ICC support -MD to output dependencies as a
+ # side effect of compilation, but ICC will put the dependencies in
+ # the current directory while Tru64 will put them in the object
+ # directory.
+ mkdir sub
+
+ am_cv_$1_dependencies_compiler_type=none
+ if test "$am_compiler_list" = ""; then
+ am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
+ fi
+ am__universal=false
+ m4_case([$1], [CC],
+ [case " $depcc " in #(
+ *\ -arch\ *\ -arch\ *) am__universal=true ;;
+ esac],
+ [CXX],
+ [case " $depcc " in #(
+ *\ -arch\ *\ -arch\ *) am__universal=true ;;
+ esac])
+
+ for depmode in $am_compiler_list; do
+ # Setup a source with many dependencies, because some compilers
+ # like to wrap large dependency lists on column 80 (with \), and
+ # we should not choose a depcomp mode which is confused by this.
+ #
+ # We need to recreate these files for each test, as the compiler may
+ # overwrite some of them when testing with obscure command lines.
+ # This happens at least with the AIX C compiler.
+ : > sub/conftest.c
+ for i in 1 2 3 4 5 6; do
+ echo '#include "conftst'$i'.h"' >> sub/conftest.c
+ # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
+ # Solaris 10 /bin/sh.
+ echo '/* dummy */' > sub/conftst$i.h
+ done
+ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+ # We check with '-c' and '-o' for the sake of the "dashmstdout"
+ # mode. It turns out that the SunPro C++ compiler does not properly
+ # handle '-M -o', and we need to detect this. Also, some Intel
+ # versions had trouble with output in subdirs.
+ am__obj=sub/conftest.${OBJEXT-o}
+ am__minus_obj="-o $am__obj"
+ case $depmode in
+ gcc)
+ # This depmode causes a compiler race in universal mode.
+ test "$am__universal" = false || continue
+ ;;
+ nosideeffect)
+ # After this tag, mechanisms are not by side-effect, so they'll
+ # only be used when explicitly requested.
+ if test "x$enable_dependency_tracking" = xyes; then
+ continue
+ else
+ break
+ fi
+ ;;
+ msvc7 | msvc7msys | msvisualcpp | msvcmsys)
+ # This compiler won't grok '-c -o', but also, the minuso test has
+ # not run yet. These depmodes are late enough in the game, and
+ # so weak that their functioning should not be impacted.
+ am__obj=conftest.${OBJEXT-o}
+ am__minus_obj=
+ ;;
+ none) break ;;
+ esac
+ if depmode=$depmode \
+ source=sub/conftest.c object=$am__obj \
+ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+ >/dev/null 2>conftest.err &&
+ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+ # icc doesn't choke on unknown options, it will just issue warnings
+ # or remarks (even with -Werror). So we grep stderr for any message
+ # that says an option was ignored or not supported.
+ # When given -MP, icc 7.0 and 7.1 complain thusly:
+ # icc: Command line warning: ignoring option '-M'; no argument required
+ # The diagnosis changed in icc 8.0:
+ # icc: Command line remark: option '-MP' not supported
+ if (grep 'ignoring option' conftest.err ||
+ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+ am_cv_$1_dependencies_compiler_type=$depmode
+ break
+ fi
+ fi
+ done
+
+ cd ..
+ rm -rf conftest.dir
+else
+ am_cv_$1_dependencies_compiler_type=none
+fi
+])
+AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
+AM_CONDITIONAL([am__fastdep$1], [
+ test "x$enable_dependency_tracking" != xno \
+ && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
+])
+
+
+# AM_SET_DEPDIR
+# -------------
+# Choose a directory name for dependency files.
+# This macro is AC_REQUIREd in _AM_DEPENDENCIES.
+AC_DEFUN([AM_SET_DEPDIR],
+[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
+])
+
+
+# AM_DEP_TRACK
+# ------------
+AC_DEFUN([AM_DEP_TRACK],
+[AC_ARG_ENABLE([dependency-tracking], [dnl
+AS_HELP_STRING(
+ [--enable-dependency-tracking],
+ [do not reject slow dependency extractors])
+AS_HELP_STRING(
+ [--disable-dependency-tracking],
+ [speeds up one-time build])])
+if test "x$enable_dependency_tracking" != xno; then
+ am_depcomp="$ac_aux_dir/depcomp"
+ AMDEPBACKSLASH='\'
+ am__nodep='_no'
+fi
+AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
+AC_SUBST([AMDEPBACKSLASH])dnl
+_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
+AC_SUBST([am__nodep])dnl
+_AM_SUBST_NOTMAKE([am__nodep])dnl
+])
+
+# Generate code to set up dependency tracking. -*- Autoconf -*-
+
+# Copyright (C) 1999-2012 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 6
+
+# _AM_OUTPUT_DEPENDENCY_COMMANDS
+# ------------------------------
+AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
+[{
+ # Autoconf 2.62 quotes --file arguments for eval, but not when files
+ # are listed without --file. Let's play safe and only enable the eval
+ # if we detect the quoting.
+ case $CONFIG_FILES in
+ *\'*) eval set x "$CONFIG_FILES" ;;
+ *) set x $CONFIG_FILES ;;
+ esac
+ shift
+ for mf
+ do
+ # Strip MF so we end up with the name of the file.
+ mf=`echo "$mf" | sed -e 's/:.*$//'`
+ # Check whether this is an Automake generated Makefile or not.
+ # We used to match only the files named 'Makefile.in', but
+ # some people rename them; so instead we look at the file content.
+ # Grep'ing the first line is not enough: some people post-process
+ # each Makefile.in and add a new line on top of each file to say so.
+ # Grep'ing the whole file is not good either: AIX grep has a line
+ # limit of 2048, but all sed's we know have understand at least 4000.
+ if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+ dirpart=`AS_DIRNAME("$mf")`
+ else
+ continue
+ fi
+ # Extract the definition of DEPDIR, am__include, and am__quote
+ # from the Makefile without running 'make'.
+ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+ test -z "$DEPDIR" && continue
+ am__include=`sed -n 's/^am__include = //p' < "$mf"`
+ test -z "am__include" && continue
+ am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+ # Find all dependency output files, they are included files with
+ # $(DEPDIR) in their names. We invoke sed twice because it is the
+ # simplest approach to changing $(DEPDIR) to its actual value in the
+ # expansion.
+ for file in `sed -n "
+ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do
+ # Make sure the directory exists.
+ test -f "$dirpart/$file" && continue
+ fdir=`AS_DIRNAME(["$file"])`
+ AS_MKDIR_P([$dirpart/$fdir])
+ # echo "creating $dirpart/$file"
+ echo '# dummy' > "$dirpart/$file"
+ done
+ done
+}
+])# _AM_OUTPUT_DEPENDENCY_COMMANDS
+
+
+# AM_OUTPUT_DEPENDENCY_COMMANDS
+# -----------------------------
+# This macro should only be invoked once -- use via AC_REQUIRE.
+#
+# This code is only required when automatic dependency tracking
+# is enabled. FIXME. This creates each '.P' file that we will
+# need in order to bootstrap the dependency handling code.
+AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
+[AC_CONFIG_COMMANDS([depfiles],
+ [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
+ [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
+])
+
+# Do all the work for Automake. -*- Autoconf -*-
+
+# Copyright (C) 1996-2012 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 19
+
+# This macro actually does too much. Some checks are only needed if
+# your package does certain things. But this isn't really a big deal.
+
+# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
+# AM_INIT_AUTOMAKE([OPTIONS])
+# -----------------------------------------------
+# The call with PACKAGE and VERSION arguments is the old style
+# call (pre autoconf-2.50), which is being phased out. PACKAGE
+# and VERSION should now be passed to AC_INIT and removed from
+# the call to AM_INIT_AUTOMAKE.
+# We support both call styles for the transition. After
+# the next Automake release, Autoconf can make the AC_INIT
+# arguments mandatory, and then we can depend on a new Autoconf
+# release and drop the old call support.
+AC_DEFUN([AM_INIT_AUTOMAKE],
+[AC_PREREQ([2.62])dnl
+dnl Autoconf wants to disallow AM_ names. We explicitly allow
+dnl the ones we care about.
+m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
+AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
+AC_REQUIRE([AC_PROG_INSTALL])dnl
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+ # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+ # is not polluted with repeated "-I."
+ AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
+ # test to see if srcdir already configured
+ if test -f $srcdir/config.status; then
+ AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+ fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+ if (cygpath --version) >/dev/null 2>/dev/null; then
+ CYGPATH_W='cygpath -w'
+ else
+ CYGPATH_W=echo
+ fi
+fi
+AC_SUBST([CYGPATH_W])
+
+# Define the identity of the package.
+dnl Distinguish between old-style and new-style calls.
+m4_ifval([$2],
+[AC_DIAGNOSE([obsolete],
+[$0: two- and three-arguments forms are deprecated. For more info, see:
+http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_INIT_AUTOMAKE-invocation])
+m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
+ AC_SUBST([PACKAGE], [$1])dnl
+ AC_SUBST([VERSION], [$2])],
+[_AM_SET_OPTIONS([$1])dnl
+dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
+m4_if(
+ m4_ifdef([AC_PACKAGE_NAME], [ok]):m4_ifdef([AC_PACKAGE_VERSION], [ok]),
+ [ok:ok],,
+ [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
+ AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
+ AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
+
+_AM_IF_OPTION([no-define],,
+[AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package])
+ AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl
+
+# Some tools Automake needs.
+AC_REQUIRE([AM_SANITY_CHECK])dnl
+AC_REQUIRE([AC_ARG_PROGRAM])dnl
+AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}])
+AM_MISSING_PROG([AUTOCONF], [autoconf])
+AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}])
+AM_MISSING_PROG([AUTOHEADER], [autoheader])
+AM_MISSING_PROG([MAKEINFO], [makeinfo])
+AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
+AC_REQUIRE([AC_PROG_MKDIR_P])dnl
+# For better backward compatibility. To be removed once Automake 1.9.x
+# dies out for good. For more background, see:
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
+AC_SUBST([mkdir_p], ['$(MKDIR_P)'])
+# We need awk for the "check" target. The system "awk" is bad on
+# some platforms.
+AC_REQUIRE([AC_PROG_AWK])dnl
+AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
+ [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
+ [_AM_PROG_TAR([v7])])])
+_AM_IF_OPTION([no-dependencies],,
+[AC_PROVIDE_IFELSE([AC_PROG_CC],
+ [_AM_DEPENDENCIES([CC])],
+ [m4_define([AC_PROG_CC],
+ m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_CXX],
+ [_AM_DEPENDENCIES([CXX])],
+ [m4_define([AC_PROG_CXX],
+ m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_OBJC],
+ [_AM_DEPENDENCIES([OBJC])],
+ [m4_define([AC_PROG_OBJC],
+ m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl
+dnl Support for Objective C++ was only introduced in Autoconf 2.65,
+dnl but we still cater to Autoconf 2.62.
+m4_ifdef([AC_PROG_OBJCXX],
+[AC_PROVIDE_IFELSE([AC_PROG_OBJCXX],
+ [_AM_DEPENDENCIES([OBJCXX])],
+ [m4_define([AC_PROG_OBJCXX],
+ m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])])dnl
+])
+_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl
+dnl The 'parallel-tests' driver may need to know about EXEEXT, so add the
+dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This macro
+dnl is hooked onto _AC_COMPILER_EXEEXT early, see below.
+AC_CONFIG_COMMANDS_PRE(dnl
+[m4_provide_if([_AM_COMPILER_EXEEXT],
+ [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
+])
+
+dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion. Do not
+dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
+dnl mangled by Autoconf and run in a shell conditional statement.
+m4_define([_AC_COMPILER_EXEEXT],
+m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
+
+
+# When config.status generates a header, we must update the stamp-h file.
+# This file resides in the same directory as the config header
+# that is generated. The stamp files are numbered to have different names.
+
+# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
+# loop where config.status creates the headers, so we can generate
+# our stamp files there.
+AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
+[# Compute $1's index in $config_headers.
+_am_arg=$1
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+ case $_am_header in
+ $_am_arg | $_am_arg:* )
+ break ;;
+ * )
+ _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+ esac
+done
+echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
+
+# Copyright (C) 2001-2012 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 8
+
+# AM_PROG_INSTALL_SH
+# ------------------
+# Define $install_sh.
+AC_DEFUN([AM_PROG_INSTALL_SH],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+if test x"${install_sh}" != xset; then
+ case $am_aux_dir in
+ *\ * | *\ *)
+ install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+ *)
+ install_sh="\${SHELL} $am_aux_dir/install-sh"
+ esac
+fi
+AC_SUBST([install_sh])])
+
+# Copyright (C) 2003-2012 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# Check whether the underlying file-system supports filenames
+# with a leading dot. For instance MS-DOS doesn't.
+AC_DEFUN([AM_SET_LEADING_DOT],
+[rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+ am__leading_dot=.
+else
+ am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+AC_SUBST([am__leading_dot])])
+
+# Add --enable-maintainer-mode option to configure. -*- Autoconf -*-
+# From Jim Meyering
+
+# Copyright (C) 1996-2012 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 7
+
+# AM_MAINTAINER_MODE([DEFAULT-MODE])
+# ----------------------------------
+# Control maintainer-specific portions of Makefiles.
+# Default is to disable them, unless 'enable' is passed literally.
+# For symmetry, 'disable' may be passed as well. Anyway, the user
+# can override the default with the --enable/--disable switch.
+AC_DEFUN([AM_MAINTAINER_MODE],
+[m4_case(m4_default([$1], [disable]),
+ [enable], [m4_define([am_maintainer_other], [disable])],
+ [disable], [m4_define([am_maintainer_other], [enable])],
+ [m4_define([am_maintainer_other], [enable])
+ m4_warn([syntax], [unexpected argument to AM@&t at _MAINTAINER_MODE: $1])])
+AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
+ dnl maintainer-mode's default is 'disable' unless 'enable' is passed
+ AC_ARG_ENABLE([maintainer-mode],
+ [AS_HELP_STRING([--]am_maintainer_other[-maintainer-mode],
+ am_maintainer_other[ make rules and dependencies not useful
+ (and sometimes confusing) to the casual installer])],
+ [USE_MAINTAINER_MODE=$enableval],
+ [USE_MAINTAINER_MODE=]m4_if(am_maintainer_other, [enable], [no], [yes]))
+ AC_MSG_RESULT([$USE_MAINTAINER_MODE])
+ AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes])
+ MAINT=$MAINTAINER_MODE_TRUE
+ AC_SUBST([MAINT])dnl
+]
+)
+
+AU_DEFUN([jm_MAINTAINER_MODE], [AM_MAINTAINER_MODE])
+
+# Check to see how 'make' treats includes. -*- Autoconf -*-
+
+# Copyright (C) 2001-2012 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 5
+
+# AM_MAKE_INCLUDE()
+# -----------------
+# Check to see how make treats includes.
+AC_DEFUN([AM_MAKE_INCLUDE],
+[am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+ @echo this is the am__doit target
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+AC_MSG_CHECKING([for style of include used by $am_make])
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# Ignore all kinds of additional output from 'make'.
+case `$am_make -s -f confmf 2> /dev/null` in #(
+*the\ am__doit\ target*)
+ am__include=include
+ am__quote=
+ _am_result=GNU
+ ;;
+esac
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+ echo '.include "confinc"' > confmf
+ case `$am_make -s -f confmf 2> /dev/null` in #(
+ *the\ am__doit\ target*)
+ am__include=.include
+ am__quote="\""
+ _am_result=BSD
+ ;;
+ esac
+fi
+AC_SUBST([am__include])
+AC_SUBST([am__quote])
+AC_MSG_RESULT([$_am_result])
+rm -f confinc confmf
+])
+
+# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*-
+
+# Copyright (C) 1997-2012 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 7
+
+# AM_MISSING_PROG(NAME, PROGRAM)
+# ------------------------------
+AC_DEFUN([AM_MISSING_PROG],
+[AC_REQUIRE([AM_MISSING_HAS_RUN])
+$1=${$1-"${am_missing_run}$2"}
+AC_SUBST($1)])
+
+
+# AM_MISSING_HAS_RUN
+# ------------------
+# Define MISSING if not defined so far and test if it supports --run.
+# If it does, set am_missing_run to use it, otherwise, to nothing.
+AC_DEFUN([AM_MISSING_HAS_RUN],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([missing])dnl
+if test x"${MISSING+set}" != xset; then
+ case $am_aux_dir in
+ *\ * | *\ *)
+ MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+ *)
+ MISSING="\${SHELL} $am_aux_dir/missing" ;;
+ esac
+fi
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+ am_missing_run="$MISSING --run "
+else
+ am_missing_run=
+ AC_MSG_WARN(['missing' script is too old or missing])
+fi
+])
+
+# Helper functions for option handling. -*- Autoconf -*-
+
+# Copyright (C) 2001-2012 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 6
+
+# _AM_MANGLE_OPTION(NAME)
+# -----------------------
+AC_DEFUN([_AM_MANGLE_OPTION],
+[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
+
+# _AM_SET_OPTION(NAME)
+# --------------------
+# Set option NAME. Presently that only means defining a flag for this option.
+AC_DEFUN([_AM_SET_OPTION],
+[m4_define(_AM_MANGLE_OPTION([$1]), [1])])
+
+# _AM_SET_OPTIONS(OPTIONS)
+# ------------------------
+# OPTIONS is a space-separated list of Automake options.
+AC_DEFUN([_AM_SET_OPTIONS],
+[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
+
+# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
+# -------------------------------------------
+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+AC_DEFUN([_AM_IF_OPTION],
+[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
+
+# Check to make sure that the build environment is sane. -*- Autoconf -*-
+
+# Copyright (C) 1996-2012 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 9
+
+# AM_SANITY_CHECK
+# ---------------
+AC_DEFUN([AM_SANITY_CHECK],
+[AC_MSG_CHECKING([whether build environment is sane])
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name. Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+ *[[\\\"\#\$\&\'\`$am_lf]]*)
+ AC_MSG_ERROR([unsafe absolute working directory name]);;
+esac
+case $srcdir in
+ *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*)
+ AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);;
+esac
+
+# Do 'set' in a subshell so we don't clobber the current shell's
+# arguments. Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+ am_has_slept=no
+ for am_try in 1 2; do
+ echo "timestamp, slept: $am_has_slept" > conftest.file
+ set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+ if test "$[*]" = "X"; then
+ # -L didn't work.
+ set X `ls -t "$srcdir/configure" conftest.file`
+ fi
+ if test "$[*]" != "X $srcdir/configure conftest.file" \
+ && test "$[*]" != "X conftest.file $srcdir/configure"; then
+
+ # If neither matched, then we have a broken ls. This can happen
+ # if, for instance, CONFIG_SHELL is bash and it inherits a
+ # broken ls alias from the environment. This has actually
+ # happened. Such a system could not be considered "sane".
+ AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
+ alias in your environment])
+ fi
+ if test "$[2]" = conftest.file || test $am_try -eq 2; then
+ break
+ fi
+ # Just in case.
+ sleep 1
+ am_has_slept=yes
+ done
+ test "$[2]" = conftest.file
+ )
+then
+ # Ok.
+ :
+else
+ AC_MSG_ERROR([newly created file is older than distributed files!
+Check your system clock])
+fi
+AC_MSG_RESULT([yes])
+# If we didn't sleep, we still need to ensure time stamps of config.status and
+# generated files are strictly newer.
+am_sleep_pid=
+if grep 'slept: no' conftest.file >/dev/null 2>&1; then
+ ( sleep 1 ) &
+ am_sleep_pid=$!
+fi
+AC_CONFIG_COMMANDS_PRE(
+ [AC_MSG_CHECKING([that generated files are newer than configure])
+ if test -n "$am_sleep_pid"; then
+ # Hide warnings about reused PIDs.
+ wait $am_sleep_pid 2>/dev/null
+ fi
+ AC_MSG_RESULT([done])])
+rm -f conftest.file
+])
+
+# Copyright (C) 2001-2012 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# AM_PROG_INSTALL_STRIP
+# ---------------------
+# One issue with vendor 'install' (even GNU) is that you can't
+# specify the program used to strip binaries. This is especially
+# annoying in cross-compiling environments, where the build's strip
+# is unlikely to handle the host's binaries.
+# Fortunately install-sh will honor a STRIPPROG variable, so we
+# always use install-sh in "make install-strip", and initialize
+# STRIPPROG with the value of the STRIP variable (set by the user).
+AC_DEFUN([AM_PROG_INSTALL_STRIP],
+[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+# Installed binaries are usually stripped using 'strip' when the user
+# run "make install-strip". However 'strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the 'STRIP' environment variable to overrule this program.
+dnl Don't test for $cross_compiling = yes, because it might be 'maybe'.
+if test "$cross_compiling" != no; then
+ AC_CHECK_TOOL([STRIP], [strip], :)
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+AC_SUBST([INSTALL_STRIP_PROGRAM])])
+
+# Copyright (C) 2006-2012 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 3
+
+# _AM_SUBST_NOTMAKE(VARIABLE)
+# ---------------------------
+# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
+# This macro is traced by Automake.
+AC_DEFUN([_AM_SUBST_NOTMAKE])
+
+# AM_SUBST_NOTMAKE(VARIABLE)
+# --------------------------
+# Public sister of _AM_SUBST_NOTMAKE.
+AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
+
+# Check how to create a tarball. -*- Autoconf -*-
+
+# Copyright (C) 2004-2012 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 3
+
+# _AM_PROG_TAR(FORMAT)
+# --------------------
+# Check how to create a tarball in format FORMAT.
+# FORMAT should be one of 'v7', 'ustar', or 'pax'.
+#
+# Substitute a variable $(am__tar) that is a command
+# writing to stdout a FORMAT-tarball containing the directory
+# $tardir.
+# tardir=directory && $(am__tar) > result.tar
+#
+# Substitute a variable $(am__untar) that extract such
+# a tarball read from stdin.
+# $(am__untar) < result.tar
+AC_DEFUN([_AM_PROG_TAR],
+[# Always define AMTAR for backward compatibility. Yes, it's still used
+# in the wild :-( We should find a proper way to deprecate it ...
+AC_SUBST([AMTAR], ['$${TAR-tar}'])
+m4_if([$1], [v7],
+ [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'],
+ [m4_case([$1], [ustar],, [pax],,
+ [m4_fatal([Unknown tar format])])
+AC_MSG_CHECKING([how to create a $1 tar archive])
+# Loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
+_am_tools=${am_cv_prog_tar_$1-$_am_tools}
+# Do not fold the above two line into one, because Tru64 sh and
+# Solaris sh will not grok spaces in the rhs of '-'.
+for _am_tool in $_am_tools
+do
+ case $_am_tool in
+ gnutar)
+ for _am_tar in tar gnutar gtar;
+ do
+ AM_RUN_LOG([$_am_tar --version]) && break
+ done
+ am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
+ am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
+ am__untar="$_am_tar -xf -"
+ ;;
+ plaintar)
+ # Must skip GNU tar: if it does not support --format= it doesn't create
+ # ustar tarball either.
+ (tar --version) >/dev/null 2>&1 && continue
+ am__tar='tar chf - "$$tardir"'
+ am__tar_='tar chf - "$tardir"'
+ am__untar='tar xf -'
+ ;;
+ pax)
+ am__tar='pax -L -x $1 -w "$$tardir"'
+ am__tar_='pax -L -x $1 -w "$tardir"'
+ am__untar='pax -r'
+ ;;
+ cpio)
+ am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
+ am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
+ am__untar='cpio -i -H $1 -d'
+ ;;
+ none)
+ am__tar=false
+ am__tar_=false
+ am__untar=false
+ ;;
+ esac
+
+ # If the value was cached, stop now. We just wanted to have am__tar
+ # and am__untar set.
+ test -n "${am_cv_prog_tar_$1}" && break
+
+ # tar/untar a dummy directory, and stop if the command works
+ rm -rf conftest.dir
+ mkdir conftest.dir
+ echo GrepMe > conftest.dir/file
+ AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
+ rm -rf conftest.dir
+ if test -s conftest.tar; then
+ AM_RUN_LOG([$am__untar <conftest.tar])
+ grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
+ fi
+done
+rm -rf conftest.dir
+
+AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
+AC_MSG_RESULT([$am_cv_prog_tar_$1])])
+AC_SUBST([am__tar])
+AC_SUBST([am__untar])
+]) # _AM_PROG_TAR
+
Deleted: vendor/openbsm/1.2_alpha4/autogen.sh
===================================================================
--- vendor/openbsm/dist/autogen.sh 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/autogen.sh 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,10 +0,0 @@
-#!/bin/sh
-#
-# $P4: //depot/projects/trustedbsd/openbsm/autogen.sh#1 $
-#
-
-libtoolize --copy --force
-aclocal
-autoheader
-automake -a -c --foreign
-autoconf
Copied: vendor/openbsm/1.2_alpha4/autogen.sh (from rev 11163, vendor/openbsm/dist/autogen.sh)
===================================================================
--- vendor/openbsm/1.2_alpha4/autogen.sh (rev 0)
+++ vendor/openbsm/1.2_alpha4/autogen.sh 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,7 @@
+#!/bin/sh
+
+libtoolize --copy --force
+aclocal
+autoheader
+automake -a -c --foreign
+autoconf
Deleted: vendor/openbsm/1.2_alpha4/bin/Makefile.am
===================================================================
--- vendor/openbsm/dist/bin/Makefile.am 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/bin/Makefile.am 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,14 +0,0 @@
-#
-# $P4: //depot/projects/trustedbsd/openbsm/bin/Makefile.am#3 $
-#
-
-SUBDIRS = \
- auditfilterd \
- auditreduce \
- praudit
-
-if HAVE_AUDIT_SYSCALLS
-SUBDIRS += \
- audit \
- auditd
-endif
Copied: vendor/openbsm/1.2_alpha4/bin/Makefile.am (from rev 11163, vendor/openbsm/dist/bin/Makefile.am)
===================================================================
--- vendor/openbsm/1.2_alpha4/bin/Makefile.am (rev 0)
+++ vendor/openbsm/1.2_alpha4/bin/Makefile.am 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,11 @@
+SUBDIRS = \
+ auditdistd \
+ auditfilterd \
+ auditreduce \
+ praudit
+
+if HAVE_AUDIT_SYSCALLS
+SUBDIRS += \
+ audit \
+ auditd
+endif
Deleted: vendor/openbsm/1.2_alpha4/bin/Makefile.in
===================================================================
--- vendor/openbsm/dist/bin/Makefile.in 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/bin/Makefile.in 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,489 +0,0 @@
-# Makefile.in generated by automake 1.10 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
- at SET_MAKE@
-
-#
-# $P4: //depot/projects/trustedbsd/openbsm/bin/Makefile.in#5 $
-#
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
- at HAVE_AUDIT_SYSCALLS_TRUE@am__append_1 = \
- at HAVE_AUDIT_SYSCALLS_TRUE@ audit \
- at HAVE_AUDIT_SYSCALLS_TRUE@ auditd
-
-subdir = bin
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/config/config.h
-CONFIG_CLEAN_FILES =
-SOURCES =
-DIST_SOURCES =
-RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
- html-recursive info-recursive install-data-recursive \
- install-dvi-recursive install-exec-recursive \
- install-html-recursive install-info-recursive \
- install-pdf-recursive install-ps-recursive install-recursive \
- installcheck-recursive installdirs-recursive pdf-recursive \
- ps-recursive uninstall-recursive
-RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
- distclean-recursive maintainer-clean-recursive
-ETAGS = etags
-CTAGS = ctags
-DIST_SUBDIRS = auditfilterd auditreduce praudit audit auditd
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AMTAR = @AMTAR@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO = @ECHO@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-F77 = @F77@
-FFLAGS = @FFLAGS@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-VERSION = @VERSION@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-SUBDIRS = auditfilterd auditreduce praudit $(am__append_1)
-all: all-recursive
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
- && exit 0; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign bin/Makefile'; \
- cd $(top_srcdir) && \
- $(AUTOMAKE) --foreign bin/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-# (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
-$(RECURSIVE_TARGETS):
- @failcom='exit 1'; \
- for f in x $$MAKEFLAGS; do \
- case $$f in \
- *=* | --[!k]*);; \
- *k*) failcom='fail=yes';; \
- esac; \
- done; \
- dot_seen=no; \
- target=`echo $@ | sed s/-recursive//`; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- dot_seen=yes; \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || eval $$failcom; \
- done; \
- if test "$$dot_seen" = "no"; then \
- $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
- fi; test -z "$$fail"
-
-$(RECURSIVE_CLEAN_TARGETS):
- @failcom='exit 1'; \
- for f in x $$MAKEFLAGS; do \
- case $$f in \
- *=* | --[!k]*);; \
- *k*) failcom='fail=yes';; \
- esac; \
- done; \
- dot_seen=no; \
- case "$@" in \
- distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
- *) list='$(SUBDIRS)' ;; \
- esac; \
- rev=''; for subdir in $$list; do \
- if test "$$subdir" = "."; then :; else \
- rev="$$subdir $$rev"; \
- fi; \
- done; \
- rev="$$rev ."; \
- target=`echo $@ | sed s/-recursive//`; \
- for subdir in $$rev; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || eval $$failcom; \
- done && test -z "$$fail"
-tags-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
- done
-ctags-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
- done
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- mkid -fID $$unique
-tags: TAGS
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
- include_option=--etags-include; \
- empty_fix=.; \
- else \
- include_option=--include; \
- empty_fix=; \
- fi; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- test ! -f $$subdir/TAGS || \
- tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
- fi; \
- done; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
- test -n "$$unique" || unique=$$empty_fix; \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$tags $$unique; \
- fi
-ctags: CTAGS
-CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(CTAGS_ARGS)$$tags$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$tags $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && cd $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) $$here
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
- fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
- else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
- || exit 1; \
- fi; \
- done
- list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- test -d "$(distdir)/$$subdir" \
- || $(MKDIR_P) "$(distdir)/$$subdir" \
- || exit 1; \
- distdir=`$(am__cd) $(distdir) && pwd`; \
- top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
- (cd $$subdir && \
- $(MAKE) $(AM_MAKEFLAGS) \
- top_distdir="$$top_distdir" \
- distdir="$$distdir/$$subdir" \
- am__remove_distdir=: \
- am__skip_length_check=: \
- distdir) \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-recursive
-all-am: Makefile
-installdirs: installdirs-recursive
-installdirs-am:
-install: install-recursive
-install-exec: install-exec-recursive
-install-data: install-data-recursive
-uninstall: uninstall-recursive
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-recursive
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-recursive
-
-clean-am: clean-generic clean-libtool mostlyclean-am
-
-distclean: distclean-recursive
- -rm -f Makefile
-distclean-am: clean-am distclean-generic distclean-tags
-
-dvi: dvi-recursive
-
-dvi-am:
-
-html: html-recursive
-
-info: info-recursive
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-recursive
-
-install-exec-am:
-
-install-html: install-html-recursive
-
-install-info: install-info-recursive
-
-install-man:
-
-install-pdf: install-pdf-recursive
-
-install-ps: install-ps-recursive
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-recursive
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-recursive
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-recursive
-
-pdf-am:
-
-ps: ps-recursive
-
-ps-am:
-
-uninstall-am:
-
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
- install-strip
-
-.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
- all all-am check check-am clean clean-generic clean-libtool \
- ctags ctags-recursive distclean distclean-generic \
- distclean-libtool distclean-tags distdir dvi dvi-am html \
- html-am info info-am install install-am install-data \
- install-data-am install-dvi install-dvi-am install-exec \
- install-exec-am install-html install-html-am install-info \
- install-info-am install-man install-pdf install-pdf-am \
- install-ps install-ps-am install-strip installcheck \
- installcheck-am installdirs installdirs-am maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic \
- mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
- uninstall uninstall-am
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
Copied: vendor/openbsm/1.2_alpha4/bin/Makefile.in (from rev 11163, vendor/openbsm/dist/bin/Makefile.in)
===================================================================
--- vendor/openbsm/1.2_alpha4/bin/Makefile.in (rev 0)
+++ vendor/openbsm/1.2_alpha4/bin/Makefile.in 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,579 @@
+# Makefile.in generated by automake 1.12.2 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2012 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+ at SET_MAKE@
+VPATH = @srcdir@
+am__make_dryrun = \
+ { \
+ am__dry=no; \
+ case $$MAKEFLAGS in \
+ *\\[\ \ ]*) \
+ echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
+ | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+ *) \
+ for am__flg in $$MAKEFLAGS; do \
+ case $$am__flg in \
+ *=*|--*) ;; \
+ *n*) am__dry=yes; break;; \
+ esac; \
+ done;; \
+ esac; \
+ test $$am__dry = yes; \
+ }
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+ at HAVE_AUDIT_SYSCALLS_TRUE@am__append_1 = \
+ at HAVE_AUDIT_SYSCALLS_TRUE@ audit \
+ at HAVE_AUDIT_SYSCALLS_TRUE@ auditd
+
+subdir = bin
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+ html-recursive info-recursive install-data-recursive \
+ install-dvi-recursive install-exec-recursive \
+ install-html-recursive install-info-recursive \
+ install-pdf-recursive install-ps-recursive install-recursive \
+ installcheck-recursive installdirs-recursive pdf-recursive \
+ ps-recursive uninstall-recursive
+am__can_run_installinfo = \
+ case $$AM_UPDATE_INFO_DIR in \
+ n|no|NO) false;; \
+ *) (install-info --version) >/dev/null 2>&1;; \
+ esac
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
+ distclean-recursive maintainer-clean-recursive
+AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
+ $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
+ distdir
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = auditdistd auditfilterd auditreduce praudit audit \
+ auditd
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+am__relativize = \
+ dir0=`pwd`; \
+ sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+ sed_rest='s,^[^/]*/*,,'; \
+ sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+ sed_butlast='s,/*[^/]*$$,,'; \
+ while test -n "$$dir1"; do \
+ first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+ if test "$$first" != "."; then \
+ if test "$$first" = ".."; then \
+ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+ else \
+ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+ if test "$$first2" = "$$first"; then \
+ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+ else \
+ dir2="../$$dir2"; \
+ fi; \
+ dir0="$$dir0"/"$$first"; \
+ fi; \
+ fi; \
+ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+ done; \
+ reldir="$$dir2"
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LEX = @LEX@
+LEXLIB = @LEXLIB@
+LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MIG = @MIG@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+VERSION = @VERSION@
+YACC = @YACC@
+YFLAGS = @YFLAGS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+SUBDIRS = auditdistd auditfilterd auditreduce praudit $(am__append_1)
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+ && { if test -f $@; then exit 0; else break; fi; }; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign bin/Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --foreign bin/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+
+mostlyclean-libtool:
+ -rm -f *.lo
+
+clean-libtool:
+ -rm -rf .libs _libs
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run 'make' without going through this Makefile.
+# To change the values of 'make' variables: instead of editing Makefiles,
+# (1) if the variable is set in 'config.status', edit 'config.status'
+# (which will cause the Makefiles to be regenerated when you run 'make');
+# (2) otherwise, pass the desired values on the 'make' command line.
+$(RECURSIVE_TARGETS) $(RECURSIVE_CLEAN_TARGETS):
+ @fail= failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+ done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+ done
+cscopelist-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) cscopelist); \
+ done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ set x; \
+ here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ shift; \
+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ if test $$# -gt 0; then \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ "$$@" $$unique; \
+ else \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$unique; \
+ fi; \
+ fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ test -z "$(CTAGS_ARGS)$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && $(am__cd) $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) "$$here"
+
+cscopelist: cscopelist-recursive $(HEADERS) $(SOURCES) $(LISP)
+ list='$(SOURCES) $(HEADERS) $(LISP)'; \
+ case "$(srcdir)" in \
+ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+ *) sdir=$(subdir)/$(srcdir) ;; \
+ esac; \
+ for i in $$list; do \
+ if test -f "$$i"; then \
+ echo "$(subdir)/$$i"; \
+ else \
+ echo "$$sdir/$$i"; \
+ fi; \
+ done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+ else \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
+ || exit 1; \
+ fi; \
+ done
+ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ $(am__make_dryrun) \
+ || test -d "$(distdir)/$$subdir" \
+ || $(MKDIR_P) "$(distdir)/$$subdir" \
+ || exit 1; \
+ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+ $(am__relativize); \
+ new_distdir=$$reldir; \
+ dir1=$$subdir; dir2="$(top_distdir)"; \
+ $(am__relativize); \
+ new_top_distdir=$$reldir; \
+ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+ ($(am__cd) $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$new_top_distdir" \
+ distdir="$$new_distdir" \
+ am__remove_distdir=: \
+ am__skip_length_check=: \
+ am__skip_mode_fix=: \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ if test -z '$(STRIP)'; then \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ install; \
+ else \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+ fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+html-am:
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-recursive
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-recursive
+
+install-html-am:
+
+install-info: install-info-recursive
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-recursive
+
+install-pdf-am:
+
+install-ps: install-ps-recursive
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am:
+
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) \
+ cscopelist-recursive ctags-recursive install-am install-strip \
+ tags-recursive
+
+.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
+ all all-am check check-am clean clean-generic clean-libtool \
+ cscopelist cscopelist-recursive ctags ctags-recursive \
+ distclean distclean-generic distclean-libtool distclean-tags \
+ distdir dvi dvi-am html html-am info info-am install \
+ install-am install-data install-data-am install-dvi \
+ install-dvi-am install-exec install-exec-am install-html \
+ install-html-am install-info install-info-am install-man \
+ install-pdf install-pdf-am install-ps install-ps-am \
+ install-strip installcheck installcheck-am installdirs \
+ installdirs-am maintainer-clean maintainer-clean-generic \
+ mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
+ ps ps-am tags tags-recursive uninstall uninstall-am
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
Deleted: vendor/openbsm/1.2_alpha4/bin/audit/Makefile.am
===================================================================
--- vendor/openbsm/dist/bin/audit/Makefile.am 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/bin/audit/Makefile.am 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,10 +0,0 @@
-#
-# $P4: //depot/projects/trustedbsd/openbsm/bin/audit/Makefile.am#1 $
-#
-
-INCLUDES = -I$(top_srcdir)
-
-sbin_PROGRAMS = audit
-audit_SOURCES = audit.c
-audit_LDADD = $(top_builddir)/libbsm/libbsm.la
-man8_MANS = audit.8
Copied: vendor/openbsm/1.2_alpha4/bin/audit/Makefile.am (from rev 11163, vendor/openbsm/dist/bin/audit/Makefile.am)
===================================================================
--- vendor/openbsm/1.2_alpha4/bin/audit/Makefile.am (rev 0)
+++ vendor/openbsm/1.2_alpha4/bin/audit/Makefile.am 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,19 @@
+if USE_NATIVE_INCLUDES
+INCLUDES = -I$(top_builddir) -I$(top_srcdir)
+else
+INCLUDES = -I$(top_builddir) -I$(top_srcdir) -I$(top_srcdir)/sys
+endif
+
+sbin_PROGRAMS = audit
+audit_LDADD = $(top_builddir)/libbsm/libbsm.la
+man8_MANS = audit.8
+
+if USE_MACH_IPC
+audit_SOURCES = auditd_controlUser.c audit.c
+CLEANFILES = auditd_controlUser.c auditd_control.h
+
+auditd_controlUser.c auditd_control.h: $(top_srcdir)/bin/auditd/auditd_control.defs
+ $(MIG) -user auditd_controlUser.c -header auditd_control.h -server /dev/null -sheader /dev/null $(top_srcdir)/bin/auditd/auditd_control.defs
+else
+audit_SOURCES = audit.c
+endif
Deleted: vendor/openbsm/1.2_alpha4/bin/audit/Makefile.in
===================================================================
--- vendor/openbsm/dist/bin/audit/Makefile.in 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/bin/audit/Makefile.in 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,516 +0,0 @@
-# Makefile.in generated by automake 1.10 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
- at SET_MAKE@
-
-#
-# $P4: //depot/projects/trustedbsd/openbsm/bin/audit/Makefile.in#4 $
-#
-
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-sbin_PROGRAMS = audit$(EXEEXT)
-subdir = bin/audit
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/config/config.h
-CONFIG_CLEAN_FILES =
-am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"
-sbinPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
-PROGRAMS = $(sbin_PROGRAMS)
-am_audit_OBJECTS = audit.$(OBJEXT)
-audit_OBJECTS = $(am_audit_OBJECTS)
-audit_DEPENDENCIES = $(top_builddir)/libbsm/libbsm.la
-DEFAULT_INCLUDES = -I. -I$(top_builddir)/config at am__isrc@
-depcomp = $(SHELL) $(top_srcdir)/config/depcomp
-am__depfiles_maybe = depfiles
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
- $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
- --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
- $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
- --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
- $(LDFLAGS) -o $@
-SOURCES = $(audit_SOURCES)
-DIST_SOURCES = $(audit_SOURCES)
-man8dir = $(mandir)/man8
-NROFF = nroff
-MANS = $(man8_MANS)
-ETAGS = etags
-CTAGS = ctags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AMTAR = @AMTAR@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO = @ECHO@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-F77 = @F77@
-FFLAGS = @FFLAGS@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-VERSION = @VERSION@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-INCLUDES = -I$(top_srcdir)
-audit_SOURCES = audit.c
-audit_LDADD = $(top_builddir)/libbsm/libbsm.la
-man8_MANS = audit.8
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .c .lo .o .obj
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
- && exit 0; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign bin/audit/Makefile'; \
- cd $(top_srcdir) && \
- $(AUTOMAKE) --foreign bin/audit/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-install-sbinPROGRAMS: $(sbin_PROGRAMS)
- @$(NORMAL_INSTALL)
- test -z "$(sbindir)" || $(MKDIR_P) "$(DESTDIR)$(sbindir)"
- @list='$(sbin_PROGRAMS)'; for p in $$list; do \
- p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
- if test -f $$p \
- || test -f $$p1 \
- ; then \
- f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
- echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(sbinPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(sbindir)/$$f'"; \
- $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(sbinPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(sbindir)/$$f" || exit 1; \
- else :; fi; \
- done
-
-uninstall-sbinPROGRAMS:
- @$(NORMAL_UNINSTALL)
- @list='$(sbin_PROGRAMS)'; for p in $$list; do \
- f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
- echo " rm -f '$(DESTDIR)$(sbindir)/$$f'"; \
- rm -f "$(DESTDIR)$(sbindir)/$$f"; \
- done
-
-clean-sbinPROGRAMS:
- @list='$(sbin_PROGRAMS)'; for p in $$list; do \
- f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
- echo " rm -f $$p $$f"; \
- rm -f $$p $$f ; \
- done
-audit$(EXEEXT): $(audit_OBJECTS) $(audit_DEPENDENCIES)
- @rm -f audit$(EXEEXT)
- $(LINK) $(audit_OBJECTS) $(audit_LDADD) $(LIBS)
-
-mostlyclean-compile:
- -rm -f *.$(OBJEXT)
-
-distclean-compile:
- -rm -f *.tab.c
-
- at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/audit.Po at am__quote@
-
-.c.o:
- at am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
- at am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
- at AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
- at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
- at am__fastdepCC_FALSE@ $(COMPILE) -c $<
-
-.c.obj:
- at am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
- at am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
- at AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
- at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
- at am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
-
-.c.lo:
- at am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
- at am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
- at AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
- at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
- at am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $<
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-install-man8: $(man8_MANS) $(man_MANS)
- @$(NORMAL_INSTALL)
- test -z "$(man8dir)" || $(MKDIR_P) "$(DESTDIR)$(man8dir)"
- @list='$(man8_MANS) $(dist_man8_MANS) $(nodist_man8_MANS)'; \
- l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
- for i in $$l2; do \
- case "$$i" in \
- *.8*) list="$$list $$i" ;; \
- esac; \
- done; \
- for i in $$list; do \
- if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
- else file=$$i; fi; \
- ext=`echo $$i | sed -e 's/^.*\\.//'`; \
- case "$$ext" in \
- 8*) ;; \
- *) ext='8' ;; \
- esac; \
- inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
- inst=`echo $$inst | sed -e 's/^.*\///'`; \
- inst=`echo $$inst | sed '$(transform)'`.$$ext; \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst"; \
- done
-uninstall-man8:
- @$(NORMAL_UNINSTALL)
- @list='$(man8_MANS) $(dist_man8_MANS) $(nodist_man8_MANS)'; \
- l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
- for i in $$l2; do \
- case "$$i" in \
- *.8*) list="$$list $$i" ;; \
- esac; \
- done; \
- for i in $$list; do \
- ext=`echo $$i | sed -e 's/^.*\\.//'`; \
- case "$$ext" in \
- 8*) ;; \
- *) ext='8' ;; \
- esac; \
- inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
- inst=`echo $$inst | sed -e 's/^.*\///'`; \
- inst=`echo $$inst | sed '$(transform)'`.$$ext; \
- echo " rm -f '$(DESTDIR)$(man8dir)/$$inst'"; \
- rm -f "$(DESTDIR)$(man8dir)/$$inst"; \
- done
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- mkid -fID $$unique
-tags: TAGS
-
-TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
- test -n "$$unique" || unique=$$empty_fix; \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$tags $$unique; \
- fi
-ctags: CTAGS
-CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(CTAGS_ARGS)$$tags$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$tags $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && cd $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) $$here
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
- fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
- else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(PROGRAMS) $(MANS)
-installdirs:
- for dir in "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic clean-libtool clean-sbinPROGRAMS \
- mostlyclean-am
-
-distclean: distclean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
- distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-info: info-am
-
-info-am:
-
-install-data-am: install-man
-
-install-dvi: install-dvi-am
-
-install-exec-am: install-sbinPROGRAMS
-
-install-html: install-html-am
-
-install-info: install-info-am
-
-install-man: install-man8
-
-install-pdf: install-pdf-am
-
-install-ps: install-ps-am
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic \
- mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-man uninstall-sbinPROGRAMS
-
-uninstall-man: uninstall-man8
-
-.MAKE: install-am install-strip
-
-.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
- clean-libtool clean-sbinPROGRAMS ctags distclean \
- distclean-compile distclean-generic distclean-libtool \
- distclean-tags distdir dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-man8 install-pdf install-pdf-am install-ps \
- install-ps-am install-sbinPROGRAMS install-strip installcheck \
- installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-compile \
- mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
- tags uninstall uninstall-am uninstall-man uninstall-man8 \
- uninstall-sbinPROGRAMS
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
Copied: vendor/openbsm/1.2_alpha4/bin/audit/Makefile.in (from rev 11163, vendor/openbsm/dist/bin/audit/Makefile.in)
===================================================================
--- vendor/openbsm/1.2_alpha4/bin/audit/Makefile.in (rev 0)
+++ vendor/openbsm/1.2_alpha4/bin/audit/Makefile.in 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,657 @@
+# Makefile.in generated by automake 1.12.2 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2012 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+ at SET_MAKE@
+
+VPATH = @srcdir@
+am__make_dryrun = \
+ { \
+ am__dry=no; \
+ case $$MAKEFLAGS in \
+ *\\[\ \ ]*) \
+ echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
+ | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+ *) \
+ for am__flg in $$MAKEFLAGS; do \
+ case $$am__flg in \
+ *=*|--*) ;; \
+ *n*) am__dry=yes; break;; \
+ esac; \
+ done;; \
+ esac; \
+ test $$am__dry = yes; \
+ }
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+sbin_PROGRAMS = audit$(EXEEXT)
+subdir = bin/audit
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
+ $(top_srcdir)/config/depcomp
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"
+PROGRAMS = $(sbin_PROGRAMS)
+am__audit_SOURCES_DIST = audit.c auditd_controlUser.c
+ at USE_MACH_IPC_FALSE@am_audit_OBJECTS = audit.$(OBJEXT)
+ at USE_MACH_IPC_TRUE@am_audit_OBJECTS = auditd_controlUser.$(OBJEXT) \
+ at USE_MACH_IPC_TRUE@ audit.$(OBJEXT)
+audit_OBJECTS = $(am_audit_OBJECTS)
+audit_DEPENDENCIES = $(top_builddir)/libbsm/libbsm.la
+DEFAULT_INCLUDES = -I. at am__isrc@ -I$(top_builddir)/config
+depcomp = $(SHELL) $(top_srcdir)/config/depcomp
+am__depfiles_maybe = depfiles
+am__mv = mv -f
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+ --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+ --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
+ $(LDFLAGS) -o $@
+SOURCES = $(audit_SOURCES)
+DIST_SOURCES = $(am__audit_SOURCES_DIST)
+am__can_run_installinfo = \
+ case $$AM_UPDATE_INFO_DIR in \
+ n|no|NO) false;; \
+ *) (install-info --version) >/dev/null 2>&1;; \
+ esac
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+ *) f=$$p;; \
+ esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+ if (++n[$$2] == $(am__install_max)) \
+ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+ END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+ test -z "$$files" \
+ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+ $(am__cd) "$$dir" && rm -f $$files; }; \
+ }
+man8dir = $(mandir)/man8
+NROFF = nroff
+MANS = $(man8_MANS)
+ETAGS = etags
+CTAGS = ctags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LEX = @LEX@
+LEXLIB = @LEXLIB@
+LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MIG = @MIG@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+VERSION = @VERSION@
+YACC = @YACC@
+YFLAGS = @YFLAGS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+ at USE_NATIVE_INCLUDES_FALSE@INCLUDES = -I$(top_builddir) -I$(top_srcdir) -I$(top_srcdir)/sys
+ at USE_NATIVE_INCLUDES_TRUE@INCLUDES = -I$(top_builddir) -I$(top_srcdir)
+audit_LDADD = $(top_builddir)/libbsm/libbsm.la
+man8_MANS = audit.8
+ at USE_MACH_IPC_FALSE@audit_SOURCES = audit.c
+ at USE_MACH_IPC_TRUE@audit_SOURCES = auditd_controlUser.c audit.c
+ at USE_MACH_IPC_TRUE@CLEANFILES = auditd_controlUser.c auditd_control.h
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .lo .o .obj
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+ && { if test -f $@; then exit 0; else break; fi; }; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign bin/audit/Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --foreign bin/audit/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+install-sbinPROGRAMS: $(sbin_PROGRAMS)
+ @$(NORMAL_INSTALL)
+ @list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \
+ if test -n "$$list"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
+ fi; \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed 's/$(EXEEXT)$$//' | \
+ while read p p1; do if test -f $$p || test -f $$p1; \
+ then echo "$$p"; echo "$$p"; else :; fi; \
+ done | \
+ sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
+ -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+ sed 'N;N;N;s,\n, ,g' | \
+ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+ if ($$2 == $$4) files[d] = files[d] " " $$1; \
+ else { print "f", $$3 "/" $$4, $$1; } } \
+ END { for (d in files) print "f", d, files[d] }' | \
+ while read type dir files; do \
+ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+ test -z "$$files" || { \
+ echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
+ $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
+ } \
+ ; done
+
+uninstall-sbinPROGRAMS:
+ @$(NORMAL_UNINSTALL)
+ @list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \
+ files=`for p in $$list; do echo "$$p"; done | \
+ sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+ -e 's/$$/$(EXEEXT)/' `; \
+ test -n "$$list" || exit 0; \
+ echo " ( cd '$(DESTDIR)$(sbindir)' && rm -f" $$files ")"; \
+ cd "$(DESTDIR)$(sbindir)" && rm -f $$files
+
+clean-sbinPROGRAMS:
+ @list='$(sbin_PROGRAMS)'; test -n "$$list" || exit 0; \
+ echo " rm -f" $$list; \
+ rm -f $$list || exit $$?; \
+ test -n "$(EXEEXT)" || exit 0; \
+ list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+ echo " rm -f" $$list; \
+ rm -f $$list
+audit$(EXEEXT): $(audit_OBJECTS) $(audit_DEPENDENCIES) $(EXTRA_audit_DEPENDENCIES)
+ @rm -f audit$(EXEEXT)
+ $(LINK) $(audit_OBJECTS) $(audit_LDADD) $(LIBS)
+
+mostlyclean-compile:
+ -rm -f *.$(OBJEXT)
+
+distclean-compile:
+ -rm -f *.tab.c
+
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/audit.Po at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/auditd_controlUser.Po at am__quote@
+
+.c.o:
+ at am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+ at am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ at am__fastdepCC_FALSE@ $(COMPILE) -c $<
+
+.c.obj:
+ at am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+ at am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ at am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
+
+.c.lo:
+ at am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+ at am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ at am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $<
+
+mostlyclean-libtool:
+ -rm -f *.lo
+
+clean-libtool:
+ -rm -rf .libs _libs
+install-man8: $(man8_MANS)
+ @$(NORMAL_INSTALL)
+ @list1='$(man8_MANS)'; \
+ list2=''; \
+ test -n "$(man8dir)" \
+ && test -n "`echo $$list1$$list2`" \
+ || exit 0; \
+ echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
+ { for i in $$list1; do echo "$$i"; done; \
+ if test -n "$$list2"; then \
+ for i in $$list2; do echo "$$i"; done \
+ | sed -n '/\.8[a-z]*$$/p'; \
+ fi; \
+ } | while read p; do \
+ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; echo "$$p"; \
+ done | \
+ sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+ sed 'N;N;s,\n, ,g' | { \
+ list=; while read file base inst; do \
+ if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
+ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
+ fi; \
+ done; \
+ for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+ while read files; do \
+ test -z "$$files" || { \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
+ done; }
+
+uninstall-man8:
+ @$(NORMAL_UNINSTALL)
+ @list='$(man8_MANS)'; test -n "$(man8dir)" || exit 0; \
+ files=`{ for i in $$list; do echo "$$i"; done; \
+ } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+ dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ set x; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ shift; \
+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ if test $$# -gt 0; then \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ "$$@" $$unique; \
+ else \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$unique; \
+ fi; \
+ fi
+ctags: CTAGS
+CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ test -z "$(CTAGS_ARGS)$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && $(am__cd) $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) "$$here"
+
+cscopelist: $(HEADERS) $(SOURCES) $(LISP)
+ list='$(SOURCES) $(HEADERS) $(LISP)'; \
+ case "$(srcdir)" in \
+ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+ *) sdir=$(subdir)/$(srcdir) ;; \
+ esac; \
+ for i in $$list; do \
+ if test -f "$$i"; then \
+ echo "$(subdir)/$$i"; \
+ else \
+ echo "$$sdir/$$i"; \
+ fi; \
+ done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+ @list='$(MANS)'; if test -n "$$list"; then \
+ list=`for p in $$list; do \
+ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+ if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
+ if test -n "$$list" && \
+ grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
+ echo "error: found man pages containing the 'missing help2man' replacement text:" >&2; \
+ grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \
+ echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \
+ echo " typically 'make maintainer-clean' will remove them" >&2; \
+ exit 1; \
+ else :; fi; \
+ else :; fi
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+ else \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+check: check-am
+all-am: Makefile $(PROGRAMS) $(MANS)
+installdirs:
+ for dir in "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"; do \
+ test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+ done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+ if test -z '$(STRIP)'; then \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ install; \
+ else \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+ fi
+mostlyclean-generic:
+
+clean-generic:
+ -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libtool clean-sbinPROGRAMS \
+ mostlyclean-am
+
+distclean: distclean-am
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+ distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-man
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am: install-sbinPROGRAMS
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man: install-man8
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+ mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-man uninstall-sbinPROGRAMS
+
+uninstall-man: uninstall-man8
+
+.MAKE: install-am install-strip
+
+.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
+ clean-libtool clean-sbinPROGRAMS cscopelist ctags distclean \
+ distclean-compile distclean-generic distclean-libtool \
+ distclean-tags distdir dvi dvi-am html html-am info info-am \
+ install install-am install-data install-data-am install-dvi \
+ install-dvi-am install-exec install-exec-am install-html \
+ install-html-am install-info install-info-am install-man \
+ install-man8 install-pdf install-pdf-am install-ps \
+ install-ps-am install-sbinPROGRAMS install-strip installcheck \
+ installcheck-am installdirs maintainer-clean \
+ maintainer-clean-generic mostlyclean mostlyclean-compile \
+ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+ tags uninstall uninstall-am uninstall-man uninstall-man8 \
+ uninstall-sbinPROGRAMS
+
+
+ at USE_MACH_IPC_TRUE@auditd_controlUser.c auditd_control.h: $(top_srcdir)/bin/auditd/auditd_control.defs
+ at USE_MACH_IPC_TRUE@ $(MIG) -user auditd_controlUser.c -header auditd_control.h -server /dev/null -sheader /dev/null $(top_srcdir)/bin/auditd/auditd_control.defs
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
Deleted: vendor/openbsm/1.2_alpha4/bin/audit/audit.8
===================================================================
--- vendor/openbsm/dist/bin/audit/audit.8 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/bin/audit/audit.8 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,86 +0,0 @@
-.\" Copyright (c) 2004 Apple Computer, Inc.
-.\" All rights reserved.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\"
-.\" 1. Redistributions of source code must retain the above copyright
-.\" notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\" notice, this list of conditions and the following disclaimer in the
-.\" documentation and/or other materials provided with the distribution.
-.\" 3. Neither the name of Apple Computer, Inc. ("Apple") nor the names of
-.\" its contributors may be used to endorse or promote products derived
-.\" from this software without specific prior written permission.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND ANY
-.\" EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-.\" WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-.\" DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR ANY
-.\" DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-.\" (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-.\" LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-.\" ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-.\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-.\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-.\"
-.\" $P4: //depot/projects/trustedbsd/openbsm/bin/audit/audit.8#10 $
-.\"
-.Dd October 2, 2006
-.Dt AUDIT 8
-.Os
-.Sh NAME
-.Nm audit
-.Nd audit management utility
-.Sh SYNOPSIS
-.Nm
-.Fl n | s | t
-.Sh DESCRIPTION
-The
-.Nm
-utility controls the state of the audit system.
-One of the following flags is required as an argument to
-.Nm :
-.Bl -tag -width indent
-.It Fl n
-Forces the audit system to close the existing audit log file and rotate to
-a new log file in a location specified in the audit control file.
-.It Fl s
-Specifies that the audit system should [re]synchronize its
-configuration from the audit control file.
-A new log file will be created.
-.It Fl t
-Specifies that the audit system should terminate.
-Log files are closed
-and renamed to indicate the time of the shutdown.
-.El
-.Sh NOTES
-The
-.Xr auditd 8
-daemon must already be running.
-.Sh FILES
-.Bl -tag -width ".Pa /etc/security/audit_control" -compact
-.It Pa /etc/security/audit_control
-Audit policy file used to configure the auditing system.
-.El
-.Sh SEE ALSO
-.Xr audit 4 ,
-.Xr audit_control 5 ,
-.Xr auditd 8
-.Sh HISTORY
-The OpenBSM implementation was created by McAfee Research, the security
-division of McAfee Inc., under contract to Apple Computer Inc.\& in 2004.
-It was subsequently adopted by the TrustedBSD Project as the foundation for
-the OpenBSM distribution.
-.Sh AUTHORS
-.An -nosplit
-This software was created by McAfee Research, the security research division
-of McAfee, Inc., under contract to Apple Computer Inc.
-Additional authors include
-.An Wayne Salamon ,
-.An Robert Watson ,
-and SPARTA Inc.
-.Pp
-The Basic Security Module (BSM) interface to audit records and audit event
-stream format were defined by Sun Microsystems.
Copied: vendor/openbsm/1.2_alpha4/bin/audit/audit.8 (from rev 11163, vendor/openbsm/dist/bin/audit/audit.8)
===================================================================
--- vendor/openbsm/1.2_alpha4/bin/audit/audit.8 (rev 0)
+++ vendor/openbsm/1.2_alpha4/bin/audit/audit.8 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,105 @@
+.\" Copyright (c) 2004-2009 Apple Inc.
+.\" All rights reserved.
+.\"
+.\" Redistribution and use in source and binary forms, with or without
+.\" modification, are permitted provided that the following conditions
+.\" are met:
+.\"
+.\" 1. Redistributions of source code must retain the above copyright
+.\" notice, this list of conditions and the following disclaimer.
+.\" 2. Redistributions in binary form must reproduce the above copyright
+.\" notice, this list of conditions and the following disclaimer in the
+.\" documentation and/or other materials provided with the distribution.
+.\" 3. Neither the name of Apple Inc. ("Apple") nor the names of
+.\" its contributors may be used to endorse or promote products derived
+.\" from this software without specific prior written permission.
+.\"
+.\" THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND ANY
+.\" EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+.\" WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+.\" DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR ANY
+.\" DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+.\" (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+.\" LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+.\" ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+.\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+.\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+.\"
+.Dd July 25, 2015
+.Dt AUDIT 8
+.Os
+.Sh NAME
+.Nm audit
+.Nd audit management utility
+.Sh SYNOPSIS
+.Nm
+.Fl e | i | n | s | t
+.Sh DESCRIPTION
+The
+.Nm
+utility controls the state of the audit system.
+One of the following flags is required as an argument to
+.Nm :
+.Bl -tag -width indent
+.It Fl e
+Forces the audit system to immediately remove audit log files that
+meet the expiration criteria specified in the audit control file without
+doing a log rotation.
+.It Fl i
+Initializes and starts auditing.
+This option is currently for Mac OS X only
+and requires
+.Xr auditd 8
+to be configured to run under
+.Xr launchd 8 .
+.It Fl n
+Forces the audit system to close the existing audit log file and rotate to
+a new log file in a location specified in the audit control file.
+Also, audit log files that meet the expiration criteria specified in the
+audit control file will be removed.
+.It Fl s
+Specifies that the audit system should [re]synchronize its
+configuration from the audit control file.
+A new log file will be created.
+.It Fl t
+Specifies that the audit system should terminate.
+Log files are closed
+and renamed to indicate the time of the shutdown.
+.El
+.Sh NOTES
+The
+.Xr auditd 8
+daemon must already be running.
+Optionally, it can be configured to be started
+on-demand by
+.Xr launchd 8
+(Mac OS X only).
+The
+.Nm
+utility requires audit administrator privileges for successful operation.
+.Sh FILES
+.Bl -tag -width ".Pa /etc/security/audit_control" -compact
+.It Pa /etc/security/audit_control
+Audit policy file used to configure the auditing system.
+.El
+.Sh SEE ALSO
+.Xr audit 4 ,
+.Xr audit_control 5 ,
+.Xr auditd 8 ,
+.Xr launchd 8 (Mac OS X)
+.Sh HISTORY
+The OpenBSM implementation was created by McAfee Research, the security
+division of McAfee Inc., under contract to Apple Computer Inc.\& in 2004.
+It was subsequently adopted by the TrustedBSD Project as the foundation for
+the OpenBSM distribution.
+.Sh AUTHORS
+.An -nosplit
+This software was created by McAfee Research, the security research division
+of McAfee, Inc., under contract to Apple Computer Inc.
+Additional authors include
+.An Wayne Salamon ,
+.An Robert Watson ,
+and SPARTA Inc.
+.Pp
+The Basic Security Module (BSM) interface to audit records and audit event
+stream format were defined by Sun Microsystems.
Deleted: vendor/openbsm/1.2_alpha4/bin/audit/audit.c
===================================================================
--- vendor/openbsm/dist/bin/audit/audit.c 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/bin/audit/audit.c 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,98 +0,0 @@
-/*
- * Copyright (c) 2005 Apple Computer, Inc.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. Neither the name of Apple Computer, Inc. ("Apple") nor the names of
- * its contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * $P4: //depot/projects/trustedbsd/openbsm/bin/audit/audit.c#8 $
- */
-/*
- * Program to trigger the audit daemon with a message that is either:
- * - Open a new audit log file
- * - Read the audit control file and take action on it
- * - Close the audit log file and exit
- *
- */
-
-#include <sys/types.h>
-#include <sys/queue.h>
-#include <sys/uio.h>
-
-#include <bsm/libbsm.h>
-
-#include <fcntl.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <unistd.h>
-
-static void
-usage(void)
-{
-
- (void)fprintf(stderr, "Usage: audit -n | -s | -t \n");
- exit(-1);
-}
-
-/*
- * Main routine to process command line options.
- */
-int
-main(int argc, char **argv)
-{
- int ch;
- unsigned int trigger = 0;
-
- if (argc != 2)
- usage();
-
- while ((ch = getopt(argc, argv, "nst")) != -1) {
- switch(ch) {
-
- case 'n':
- trigger = AUDIT_TRIGGER_ROTATE_USER;
- break;
-
- case 's':
- trigger = AUDIT_TRIGGER_READ_FILE;
- break;
-
- case 't':
- trigger = AUDIT_TRIGGER_CLOSE_AND_DIE;
- break;
-
- case '?':
- default:
- usage();
- break;
- }
- }
- if (auditon(A_SENDTRIGGER, &trigger, sizeof(trigger)) < 0) {
- perror("Error sending trigger");
- exit(-1);
- } else {
- printf("Trigger sent.\n");
- exit (0);
- }
-}
Copied: vendor/openbsm/1.2_alpha4/bin/audit/audit.c (from rev 11163, vendor/openbsm/dist/bin/audit/audit.c)
===================================================================
--- vendor/openbsm/1.2_alpha4/bin/audit/audit.c (rev 0)
+++ vendor/openbsm/1.2_alpha4/bin/audit/audit.c 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,179 @@
+/*-
+ * Copyright (c) 2005-2009 Apple Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of Apple Inc. ("Apple") nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+/*
+ * Program to trigger the audit daemon with a message that is either:
+ * - Open a new audit log file
+ * - Read the audit control file and take action on it
+ * - Close the audit log file and exit
+ *
+ */
+
+#include <sys/types.h>
+#include <config/config.h>
+#ifdef HAVE_FULL_QUEUE_H
+#include <sys/queue.h>
+#else /* !HAVE_FULL_QUEUE_H */
+#include <compat/queue.h>
+#endif /* !HAVE_FULL_QUEUE_H */
+#include <sys/uio.h>
+
+#include <bsm/libbsm.h>
+
+#include <errno.h>
+#include <fcntl.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+
+
+static int send_trigger(int);
+
+#ifdef USE_MACH_IPC
+#include <mach/mach.h>
+#include <servers/netname.h>
+#include <mach/message.h>
+#include <mach/port.h>
+#include <mach/mach_error.h>
+#include <mach/host_special_ports.h>
+#include <servers/bootstrap.h>
+
+#include "auditd_control.h"
+
+/*
+ * XXX The following are temporary until these can be added to the kernel
+ * audit.h header.
+ */
+#ifndef AUDIT_TRIGGER_INITIALIZE
+#define AUDIT_TRIGGER_INITIALIZE 7
+#endif
+#ifndef AUDIT_TRIGGER_EXPIRE_TRAILS
+#define AUDIT_TRIGGER_EXPIRE_TRAILS 8
+#endif
+
+static int
+send_trigger(int trigger)
+{
+ mach_port_t serverPort;
+ kern_return_t error;
+
+ error = host_get_audit_control_port(mach_host_self(), &serverPort);
+ if (error != KERN_SUCCESS) {
+ if (geteuid() != 0) {
+ errno = EPERM;
+ perror("audit requires root privileges");
+ } else
+ mach_error("Cannot get auditd_control Mach port:",
+ error);
+ return (-1);
+ }
+
+ error = auditd_control(serverPort, trigger);
+ if (error != KERN_SUCCESS) {
+ mach_error("Error sending trigger: ", error);
+ return (-1);
+ }
+
+ return (0);
+}
+
+#else /* ! USE_MACH_IPC */
+
+static int
+send_trigger(int trigger)
+{
+ int error;
+
+ error = audit_send_trigger(&trigger);
+ if (error != 0) {
+ if (error == EPERM)
+ perror("audit requires root privileges");
+ else
+ perror("Error sending trigger");
+ return (-1);
+ }
+
+ return (0);
+}
+#endif /* ! USE_MACH_IPC */
+
+static void
+usage(void)
+{
+
+ (void)fprintf(stderr, "Usage: audit -e | -i | -n | -s | -t \n");
+ exit(-1);
+}
+
+/*
+ * Main routine to process command line options.
+ */
+int
+main(int argc, char **argv)
+{
+ int ch;
+ unsigned int trigger = 0;
+
+ if (argc != 2)
+ usage();
+
+ while ((ch = getopt(argc, argv, "einst")) != -1) {
+ switch(ch) {
+
+ case 'e':
+ trigger = AUDIT_TRIGGER_EXPIRE_TRAILS;
+ break;
+
+ case 'i':
+ trigger = AUDIT_TRIGGER_INITIALIZE;
+ break;
+
+ case 'n':
+ trigger = AUDIT_TRIGGER_ROTATE_USER;
+ break;
+
+ case 's':
+ trigger = AUDIT_TRIGGER_READ_FILE;
+ break;
+
+ case 't':
+ trigger = AUDIT_TRIGGER_CLOSE_AND_DIE;
+ break;
+
+ case '?':
+ default:
+ usage();
+ break;
+ }
+ }
+ if (send_trigger(trigger) < 0)
+ exit(-1);
+
+ printf("Trigger sent.\n");
+ exit (0);
+}
Deleted: vendor/openbsm/1.2_alpha4/bin/auditd/Makefile.am
===================================================================
--- vendor/openbsm/dist/bin/auditd/Makefile.am 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/bin/auditd/Makefile.am 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,10 +0,0 @@
-#
-# $P4: //depot/projects/trustedbsd/openbsm/bin/auditd/Makefile.am#1 $
-#
-
-INCLUDES = -I$(top_srcdir)
-
-sbin_PROGRAMS = auditd
-auditd_SOURCES = audit_warn.c auditd.c
-auditd_LDADD = $(top_builddir)/libbsm/libbsm.la
-man8_MANS = auditd.8
Copied: vendor/openbsm/1.2_alpha4/bin/auditd/Makefile.am (from rev 11163, vendor/openbsm/dist/bin/auditd/Makefile.am)
===================================================================
--- vendor/openbsm/1.2_alpha4/bin/auditd/Makefile.am (rev 0)
+++ vendor/openbsm/1.2_alpha4/bin/auditd/Makefile.am 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,22 @@
+if USE_NATIVE_INCLUDES
+INCLUDES = -I$(top_builddir) -I$(top_srcdir)
+else
+INCLUDES = -I$(top_builddir) -I$(top_srcdir) -I$(top_srcdir)/sys
+endif
+
+sbin_PROGRAMS = auditd
+auditd_LDADD = $(top_builddir)/libbsm/libbsm.la $(top_builddir)/libauditd/libauditd.la
+man8_MANS = auditd.8
+
+if USE_MACH_IPC
+auditd_SOURCES = auditd_controlServer.c audit_triggersServer.c audit_warn.c auditd.c auditd_darwin.c
+CLEANFILES = auditd_control_server.c auditd_controlServer.h audit_triggersServer.c audit_triggersServer.h
+
+auditd_controlServer.c auditd_controlServer.h: auditd_control.defs
+ $(MIG) -user /dev/null -header /dev/null -server auditd_controlServer.c -sheader auditd_controlServer.h $(top_srcdir)/bin/auditd/auditd_control.defs
+
+audit_triggersServer.c audit_triggersServer.h: audit_triggers.defs
+ $(MIG) -user /dev/null -header /dev/null -server audit_triggersServer.c -sheader audit_triggersServer.h $(top_srcdir)/bin/auditd/audit_triggers.defs
+else
+auditd_SOURCES = audit_warn.c auditd.c auditd_fbsd.c
+endif
Deleted: vendor/openbsm/1.2_alpha4/bin/auditd/Makefile.in
===================================================================
--- vendor/openbsm/dist/bin/auditd/Makefile.in 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/bin/auditd/Makefile.in 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,517 +0,0 @@
-# Makefile.in generated by automake 1.10 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
- at SET_MAKE@
-
-#
-# $P4: //depot/projects/trustedbsd/openbsm/bin/auditd/Makefile.in#4 $
-#
-
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-sbin_PROGRAMS = auditd$(EXEEXT)
-subdir = bin/auditd
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/config/config.h
-CONFIG_CLEAN_FILES =
-am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"
-sbinPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
-PROGRAMS = $(sbin_PROGRAMS)
-am_auditd_OBJECTS = audit_warn.$(OBJEXT) auditd.$(OBJEXT)
-auditd_OBJECTS = $(am_auditd_OBJECTS)
-auditd_DEPENDENCIES = $(top_builddir)/libbsm/libbsm.la
-DEFAULT_INCLUDES = -I. -I$(top_builddir)/config at am__isrc@
-depcomp = $(SHELL) $(top_srcdir)/config/depcomp
-am__depfiles_maybe = depfiles
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
- $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
- --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
- $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
- --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
- $(LDFLAGS) -o $@
-SOURCES = $(auditd_SOURCES)
-DIST_SOURCES = $(auditd_SOURCES)
-man8dir = $(mandir)/man8
-NROFF = nroff
-MANS = $(man8_MANS)
-ETAGS = etags
-CTAGS = ctags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AMTAR = @AMTAR@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO = @ECHO@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-F77 = @F77@
-FFLAGS = @FFLAGS@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-VERSION = @VERSION@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-INCLUDES = -I$(top_srcdir)
-auditd_SOURCES = audit_warn.c auditd.c
-auditd_LDADD = $(top_builddir)/libbsm/libbsm.la
-man8_MANS = auditd.8
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .c .lo .o .obj
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
- && exit 0; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign bin/auditd/Makefile'; \
- cd $(top_srcdir) && \
- $(AUTOMAKE) --foreign bin/auditd/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-install-sbinPROGRAMS: $(sbin_PROGRAMS)
- @$(NORMAL_INSTALL)
- test -z "$(sbindir)" || $(MKDIR_P) "$(DESTDIR)$(sbindir)"
- @list='$(sbin_PROGRAMS)'; for p in $$list; do \
- p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
- if test -f $$p \
- || test -f $$p1 \
- ; then \
- f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
- echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(sbinPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(sbindir)/$$f'"; \
- $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(sbinPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(sbindir)/$$f" || exit 1; \
- else :; fi; \
- done
-
-uninstall-sbinPROGRAMS:
- @$(NORMAL_UNINSTALL)
- @list='$(sbin_PROGRAMS)'; for p in $$list; do \
- f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
- echo " rm -f '$(DESTDIR)$(sbindir)/$$f'"; \
- rm -f "$(DESTDIR)$(sbindir)/$$f"; \
- done
-
-clean-sbinPROGRAMS:
- @list='$(sbin_PROGRAMS)'; for p in $$list; do \
- f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
- echo " rm -f $$p $$f"; \
- rm -f $$p $$f ; \
- done
-auditd$(EXEEXT): $(auditd_OBJECTS) $(auditd_DEPENDENCIES)
- @rm -f auditd$(EXEEXT)
- $(LINK) $(auditd_OBJECTS) $(auditd_LDADD) $(LIBS)
-
-mostlyclean-compile:
- -rm -f *.$(OBJEXT)
-
-distclean-compile:
- -rm -f *.tab.c
-
- at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/audit_warn.Po at am__quote@
- at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/auditd.Po at am__quote@
-
-.c.o:
- at am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
- at am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
- at AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
- at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
- at am__fastdepCC_FALSE@ $(COMPILE) -c $<
-
-.c.obj:
- at am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
- at am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
- at AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
- at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
- at am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
-
-.c.lo:
- at am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
- at am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
- at AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
- at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
- at am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $<
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-install-man8: $(man8_MANS) $(man_MANS)
- @$(NORMAL_INSTALL)
- test -z "$(man8dir)" || $(MKDIR_P) "$(DESTDIR)$(man8dir)"
- @list='$(man8_MANS) $(dist_man8_MANS) $(nodist_man8_MANS)'; \
- l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
- for i in $$l2; do \
- case "$$i" in \
- *.8*) list="$$list $$i" ;; \
- esac; \
- done; \
- for i in $$list; do \
- if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
- else file=$$i; fi; \
- ext=`echo $$i | sed -e 's/^.*\\.//'`; \
- case "$$ext" in \
- 8*) ;; \
- *) ext='8' ;; \
- esac; \
- inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
- inst=`echo $$inst | sed -e 's/^.*\///'`; \
- inst=`echo $$inst | sed '$(transform)'`.$$ext; \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst"; \
- done
-uninstall-man8:
- @$(NORMAL_UNINSTALL)
- @list='$(man8_MANS) $(dist_man8_MANS) $(nodist_man8_MANS)'; \
- l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
- for i in $$l2; do \
- case "$$i" in \
- *.8*) list="$$list $$i" ;; \
- esac; \
- done; \
- for i in $$list; do \
- ext=`echo $$i | sed -e 's/^.*\\.//'`; \
- case "$$ext" in \
- 8*) ;; \
- *) ext='8' ;; \
- esac; \
- inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
- inst=`echo $$inst | sed -e 's/^.*\///'`; \
- inst=`echo $$inst | sed '$(transform)'`.$$ext; \
- echo " rm -f '$(DESTDIR)$(man8dir)/$$inst'"; \
- rm -f "$(DESTDIR)$(man8dir)/$$inst"; \
- done
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- mkid -fID $$unique
-tags: TAGS
-
-TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
- test -n "$$unique" || unique=$$empty_fix; \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$tags $$unique; \
- fi
-ctags: CTAGS
-CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(CTAGS_ARGS)$$tags$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$tags $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && cd $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) $$here
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
- fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
- else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(PROGRAMS) $(MANS)
-installdirs:
- for dir in "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic clean-libtool clean-sbinPROGRAMS \
- mostlyclean-am
-
-distclean: distclean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
- distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-info: info-am
-
-info-am:
-
-install-data-am: install-man
-
-install-dvi: install-dvi-am
-
-install-exec-am: install-sbinPROGRAMS
-
-install-html: install-html-am
-
-install-info: install-info-am
-
-install-man: install-man8
-
-install-pdf: install-pdf-am
-
-install-ps: install-ps-am
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic \
- mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-man uninstall-sbinPROGRAMS
-
-uninstall-man: uninstall-man8
-
-.MAKE: install-am install-strip
-
-.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
- clean-libtool clean-sbinPROGRAMS ctags distclean \
- distclean-compile distclean-generic distclean-libtool \
- distclean-tags distdir dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-man8 install-pdf install-pdf-am install-ps \
- install-ps-am install-sbinPROGRAMS install-strip installcheck \
- installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-compile \
- mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
- tags uninstall uninstall-am uninstall-man uninstall-man8 \
- uninstall-sbinPROGRAMS
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
Copied: vendor/openbsm/1.2_alpha4/bin/auditd/Makefile.in (from rev 11163, vendor/openbsm/dist/bin/auditd/Makefile.in)
===================================================================
--- vendor/openbsm/1.2_alpha4/bin/auditd/Makefile.in (rev 0)
+++ vendor/openbsm/1.2_alpha4/bin/auditd/Makefile.in 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,669 @@
+# Makefile.in generated by automake 1.12.2 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2012 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+ at SET_MAKE@
+
+VPATH = @srcdir@
+am__make_dryrun = \
+ { \
+ am__dry=no; \
+ case $$MAKEFLAGS in \
+ *\\[\ \ ]*) \
+ echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
+ | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+ *) \
+ for am__flg in $$MAKEFLAGS; do \
+ case $$am__flg in \
+ *=*|--*) ;; \
+ *n*) am__dry=yes; break;; \
+ esac; \
+ done;; \
+ esac; \
+ test $$am__dry = yes; \
+ }
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+sbin_PROGRAMS = auditd$(EXEEXT)
+subdir = bin/auditd
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
+ $(top_srcdir)/config/depcomp
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"
+PROGRAMS = $(sbin_PROGRAMS)
+am__auditd_SOURCES_DIST = audit_warn.c auditd.c auditd_fbsd.c \
+ auditd_controlServer.c audit_triggersServer.c auditd_darwin.c
+ at USE_MACH_IPC_FALSE@am_auditd_OBJECTS = audit_warn.$(OBJEXT) \
+ at USE_MACH_IPC_FALSE@ auditd.$(OBJEXT) auditd_fbsd.$(OBJEXT)
+ at USE_MACH_IPC_TRUE@am_auditd_OBJECTS = auditd_controlServer.$(OBJEXT) \
+ at USE_MACH_IPC_TRUE@ audit_triggersServer.$(OBJEXT) \
+ at USE_MACH_IPC_TRUE@ audit_warn.$(OBJEXT) auditd.$(OBJEXT) \
+ at USE_MACH_IPC_TRUE@ auditd_darwin.$(OBJEXT)
+auditd_OBJECTS = $(am_auditd_OBJECTS)
+auditd_DEPENDENCIES = $(top_builddir)/libbsm/libbsm.la \
+ $(top_builddir)/libauditd/libauditd.la
+DEFAULT_INCLUDES = -I. at am__isrc@ -I$(top_builddir)/config
+depcomp = $(SHELL) $(top_srcdir)/config/depcomp
+am__depfiles_maybe = depfiles
+am__mv = mv -f
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+ --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+ --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
+ $(LDFLAGS) -o $@
+SOURCES = $(auditd_SOURCES)
+DIST_SOURCES = $(am__auditd_SOURCES_DIST)
+am__can_run_installinfo = \
+ case $$AM_UPDATE_INFO_DIR in \
+ n|no|NO) false;; \
+ *) (install-info --version) >/dev/null 2>&1;; \
+ esac
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+ *) f=$$p;; \
+ esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+ if (++n[$$2] == $(am__install_max)) \
+ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+ END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+ test -z "$$files" \
+ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+ $(am__cd) "$$dir" && rm -f $$files; }; \
+ }
+man8dir = $(mandir)/man8
+NROFF = nroff
+MANS = $(man8_MANS)
+ETAGS = etags
+CTAGS = ctags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LEX = @LEX@
+LEXLIB = @LEXLIB@
+LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MIG = @MIG@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+VERSION = @VERSION@
+YACC = @YACC@
+YFLAGS = @YFLAGS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+ at USE_NATIVE_INCLUDES_FALSE@INCLUDES = -I$(top_builddir) -I$(top_srcdir) -I$(top_srcdir)/sys
+ at USE_NATIVE_INCLUDES_TRUE@INCLUDES = -I$(top_builddir) -I$(top_srcdir)
+auditd_LDADD = $(top_builddir)/libbsm/libbsm.la $(top_builddir)/libauditd/libauditd.la
+man8_MANS = auditd.8
+ at USE_MACH_IPC_FALSE@auditd_SOURCES = audit_warn.c auditd.c auditd_fbsd.c
+ at USE_MACH_IPC_TRUE@auditd_SOURCES = auditd_controlServer.c audit_triggersServer.c audit_warn.c auditd.c auditd_darwin.c
+ at USE_MACH_IPC_TRUE@CLEANFILES = auditd_control_server.c auditd_controlServer.h audit_triggersServer.c audit_triggersServer.h
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .lo .o .obj
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+ && { if test -f $@; then exit 0; else break; fi; }; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign bin/auditd/Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --foreign bin/auditd/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+install-sbinPROGRAMS: $(sbin_PROGRAMS)
+ @$(NORMAL_INSTALL)
+ @list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \
+ if test -n "$$list"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
+ fi; \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed 's/$(EXEEXT)$$//' | \
+ while read p p1; do if test -f $$p || test -f $$p1; \
+ then echo "$$p"; echo "$$p"; else :; fi; \
+ done | \
+ sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
+ -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+ sed 'N;N;N;s,\n, ,g' | \
+ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+ if ($$2 == $$4) files[d] = files[d] " " $$1; \
+ else { print "f", $$3 "/" $$4, $$1; } } \
+ END { for (d in files) print "f", d, files[d] }' | \
+ while read type dir files; do \
+ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+ test -z "$$files" || { \
+ echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
+ $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
+ } \
+ ; done
+
+uninstall-sbinPROGRAMS:
+ @$(NORMAL_UNINSTALL)
+ @list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \
+ files=`for p in $$list; do echo "$$p"; done | \
+ sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+ -e 's/$$/$(EXEEXT)/' `; \
+ test -n "$$list" || exit 0; \
+ echo " ( cd '$(DESTDIR)$(sbindir)' && rm -f" $$files ")"; \
+ cd "$(DESTDIR)$(sbindir)" && rm -f $$files
+
+clean-sbinPROGRAMS:
+ @list='$(sbin_PROGRAMS)'; test -n "$$list" || exit 0; \
+ echo " rm -f" $$list; \
+ rm -f $$list || exit $$?; \
+ test -n "$(EXEEXT)" || exit 0; \
+ list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+ echo " rm -f" $$list; \
+ rm -f $$list
+auditd$(EXEEXT): $(auditd_OBJECTS) $(auditd_DEPENDENCIES) $(EXTRA_auditd_DEPENDENCIES)
+ @rm -f auditd$(EXEEXT)
+ $(LINK) $(auditd_OBJECTS) $(auditd_LDADD) $(LIBS)
+
+mostlyclean-compile:
+ -rm -f *.$(OBJEXT)
+
+distclean-compile:
+ -rm -f *.tab.c
+
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/audit_triggersServer.Po at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/audit_warn.Po at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/auditd.Po at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/auditd_controlServer.Po at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/auditd_darwin.Po at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/auditd_fbsd.Po at am__quote@
+
+.c.o:
+ at am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+ at am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ at am__fastdepCC_FALSE@ $(COMPILE) -c $<
+
+.c.obj:
+ at am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+ at am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ at am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
+
+.c.lo:
+ at am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+ at am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ at am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $<
+
+mostlyclean-libtool:
+ -rm -f *.lo
+
+clean-libtool:
+ -rm -rf .libs _libs
+install-man8: $(man8_MANS)
+ @$(NORMAL_INSTALL)
+ @list1='$(man8_MANS)'; \
+ list2=''; \
+ test -n "$(man8dir)" \
+ && test -n "`echo $$list1$$list2`" \
+ || exit 0; \
+ echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
+ { for i in $$list1; do echo "$$i"; done; \
+ if test -n "$$list2"; then \
+ for i in $$list2; do echo "$$i"; done \
+ | sed -n '/\.8[a-z]*$$/p'; \
+ fi; \
+ } | while read p; do \
+ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; echo "$$p"; \
+ done | \
+ sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+ sed 'N;N;s,\n, ,g' | { \
+ list=; while read file base inst; do \
+ if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
+ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
+ fi; \
+ done; \
+ for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+ while read files; do \
+ test -z "$$files" || { \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
+ done; }
+
+uninstall-man8:
+ @$(NORMAL_UNINSTALL)
+ @list='$(man8_MANS)'; test -n "$(man8dir)" || exit 0; \
+ files=`{ for i in $$list; do echo "$$i"; done; \
+ } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+ dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ set x; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ shift; \
+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ if test $$# -gt 0; then \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ "$$@" $$unique; \
+ else \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$unique; \
+ fi; \
+ fi
+ctags: CTAGS
+CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ test -z "$(CTAGS_ARGS)$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && $(am__cd) $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) "$$here"
+
+cscopelist: $(HEADERS) $(SOURCES) $(LISP)
+ list='$(SOURCES) $(HEADERS) $(LISP)'; \
+ case "$(srcdir)" in \
+ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+ *) sdir=$(subdir)/$(srcdir) ;; \
+ esac; \
+ for i in $$list; do \
+ if test -f "$$i"; then \
+ echo "$(subdir)/$$i"; \
+ else \
+ echo "$$sdir/$$i"; \
+ fi; \
+ done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+ @list='$(MANS)'; if test -n "$$list"; then \
+ list=`for p in $$list; do \
+ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+ if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
+ if test -n "$$list" && \
+ grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
+ echo "error: found man pages containing the 'missing help2man' replacement text:" >&2; \
+ grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \
+ echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \
+ echo " typically 'make maintainer-clean' will remove them" >&2; \
+ exit 1; \
+ else :; fi; \
+ else :; fi
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+ else \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+check: check-am
+all-am: Makefile $(PROGRAMS) $(MANS)
+installdirs:
+ for dir in "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"; do \
+ test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+ done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+ if test -z '$(STRIP)'; then \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ install; \
+ else \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+ fi
+mostlyclean-generic:
+
+clean-generic:
+ -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libtool clean-sbinPROGRAMS \
+ mostlyclean-am
+
+distclean: distclean-am
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+ distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-man
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am: install-sbinPROGRAMS
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man: install-man8
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+ mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-man uninstall-sbinPROGRAMS
+
+uninstall-man: uninstall-man8
+
+.MAKE: install-am install-strip
+
+.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
+ clean-libtool clean-sbinPROGRAMS cscopelist ctags distclean \
+ distclean-compile distclean-generic distclean-libtool \
+ distclean-tags distdir dvi dvi-am html html-am info info-am \
+ install install-am install-data install-data-am install-dvi \
+ install-dvi-am install-exec install-exec-am install-html \
+ install-html-am install-info install-info-am install-man \
+ install-man8 install-pdf install-pdf-am install-ps \
+ install-ps-am install-sbinPROGRAMS install-strip installcheck \
+ installcheck-am installdirs maintainer-clean \
+ maintainer-clean-generic mostlyclean mostlyclean-compile \
+ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+ tags uninstall uninstall-am uninstall-man uninstall-man8 \
+ uninstall-sbinPROGRAMS
+
+
+ at USE_MACH_IPC_TRUE@auditd_controlServer.c auditd_controlServer.h: auditd_control.defs
+ at USE_MACH_IPC_TRUE@ $(MIG) -user /dev/null -header /dev/null -server auditd_controlServer.c -sheader auditd_controlServer.h $(top_srcdir)/bin/auditd/auditd_control.defs
+
+ at USE_MACH_IPC_TRUE@audit_triggersServer.c audit_triggersServer.h: audit_triggers.defs
+ at USE_MACH_IPC_TRUE@ $(MIG) -user /dev/null -header /dev/null -server audit_triggersServer.c -sheader audit_triggersServer.h $(top_srcdir)/bin/auditd/audit_triggers.defs
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
Copied: vendor/openbsm/1.2_alpha4/bin/auditd/audit_triggers.defs (from rev 11163, vendor/openbsm/dist/bin/auditd/audit_triggers.defs)
===================================================================
--- vendor/openbsm/1.2_alpha4/bin/auditd/audit_triggers.defs (rev 0)
+++ vendor/openbsm/1.2_alpha4/bin/auditd/audit_triggers.defs 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1 @@
+#include <mach/audit_triggers.defs>
Deleted: vendor/openbsm/1.2_alpha4/bin/auditd/audit_warn.c
===================================================================
--- vendor/openbsm/dist/bin/auditd/audit_warn.c 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/bin/auditd/audit_warn.c 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,243 +0,0 @@
-/*
- * Copyright (c) 2005 Apple Computer, Inc.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. Neither the name of Apple Computer, Inc. ("Apple") nor the names of
- * its contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * $P4: //depot/projects/trustedbsd/openbsm/bin/auditd/audit_warn.c#8 $
- */
-
-#include <sys/types.h>
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <unistd.h>
-
-#include "auditd.h"
-
-/*
- * Write an audit-related error to the system log via syslog(3).
- */
-static int
-auditwarnlog(char *args[])
-{
- char *loc_args[9];
- pid_t pid;
- int i;
-
- loc_args[0] = AUDITWARN_SCRIPT;
- for (i = 0; args[i] != NULL && i < 8; i++)
- loc_args[i+1] = args[i];
- loc_args[i+1] = NULL;
-
- pid = fork();
- if (pid == -1)
- return (-1);
- if (pid == 0) {
- /*
- * Child.
- */
- execv(AUDITWARN_SCRIPT, loc_args);
- syslog(LOG_ERR, "Could not exec %s (%m)\n",
- AUDITWARN_SCRIPT);
- exit(1);
- }
- /*
- * Parent.
- */
- return (0);
-}
-
-/*
- * Indicates that the hard limit for all filesystems has been exceeded count
- * times.
- */
-int
-audit_warn_allhard(int count)
-{
- char intstr[12];
- char *args[3];
-
- snprintf(intstr, 12, "%d", count);
-
- args[0] = HARDLIM_ALL_WARN;
- args[1] = intstr;
- args[2] = NULL;
-
- return (auditwarnlog(args));
-}
-
-/*
- * Indicates that the soft limit for all filesystems has been exceeded.
- */
-int
-audit_warn_allsoft(void)
-{
- char *args[2];
-
- args[0] = SOFTLIM_ALL_WARN;
- args[1] = NULL;
-
- return (auditwarnlog(args));
-}
-
-/*
- * Indicates that someone other than the audit daemon turned off auditing.
- * XXX Its not clear at this point how this function will be invoked.
- *
- * XXXRW: This function is not used.
- */
-int
-audit_warn_auditoff(void)
-{
- char *args[2];
-
- args[0] = AUDITOFF_WARN;
- args[1] = NULL;
-
- return (auditwarnlog(args));
-}
-
-/*
- * Indicate that a trail file has been closed, so can now be post-processed.
- */
-int
-audit_warn_closefile(char *filename)
-{
- char *args[3];
-
- args[0] = CLOSEFILE_WARN;
- args[1] = filename;
- args[2] = NULL;
-
- return (auditwarnlog(args));
-}
-
-/*
- * Indicates that the audit deammn is already running
- */
-int
-audit_warn_ebusy(void)
-{
- char *args[2];
-
- args[0] = EBUSY_WARN;
- args[1] = NULL;
-
- return (auditwarnlog(args));
-}
-
-/*
- * Indicates that there is a problem getting the directory from
- * audit_control.
- *
- * XXX Note that we take the filename instead of a count as the argument here
- * (different from BSM).
- */
-int
-audit_warn_getacdir(char *filename)
-{
- char *args[3];
-
- args[0] = GETACDIR_WARN;
- args[1] = filename;
- args[2] = NULL;
-
- return (auditwarnlog(args));
-}
-
-/*
- * Indicates that the hard limit for this file has been exceeded.
- */
-int
-audit_warn_hard(char *filename)
-{
- char *args[3];
-
- args[0] = HARDLIM_WARN;
- args[1] = filename;
- args[2] = NULL;
-
- return (auditwarnlog(args));
-}
-
-/*
- * Indicates that auditing could not be started.
- */
-int
-audit_warn_nostart(void)
-{
- char *args[2];
-
- args[0] = NOSTART_WARN;
- args[1] = NULL;
-
- return (auditwarnlog(args));
-}
-
-/*
- * Indicaes that an error occrred during the orderly shutdown of the audit
- * daemon.
- */
-int
-audit_warn_postsigterm(void)
-{
- char *args[2];
-
- args[0] = POSTSIGTERM_WARN;
- args[1] = NULL;
-
- return (auditwarnlog(args));
-}
-
-/*
- * Indicates that the soft limit for this file has been exceeded.
- */
-int
-audit_warn_soft(char *filename)
-{
- char *args[3];
-
- args[0] = SOFTLIM_WARN;
- args[1] = filename;
- args[2] = NULL;
-
- return (auditwarnlog(args));
-}
-
-/*
- * Indicates that the temporary audit file already exists indicating a fatal
- * error.
- */
-int
-audit_warn_tmpfile(void)
-{
- char *args[2];
-
- args[0] = TMPFILE_WARN;
- args[1] = NULL;
-
- return (auditwarnlog(args));
-}
Copied: vendor/openbsm/1.2_alpha4/bin/auditd/audit_warn.c (from rev 11163, vendor/openbsm/dist/bin/auditd/audit_warn.c)
===================================================================
--- vendor/openbsm/1.2_alpha4/bin/auditd/audit_warn.c (rev 0)
+++ vendor/openbsm/1.2_alpha4/bin/auditd/audit_warn.c 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,251 @@
+/*-
+ * Copyright (c) 2005-2009 Apple Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of Apple Inc. ("Apple") nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <sys/types.h>
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+
+#include "auditd.h"
+
+/*
+ * Write an audit-related error to the system log via syslog(3).
+ */
+static int
+auditwarnlog(char *args[])
+{
+ char *loc_args[9];
+ pid_t pid;
+ int i;
+
+ loc_args[0] = AUDITWARN_SCRIPT;
+ for (i = 0; args[i] != NULL && i < 8; i++)
+ loc_args[i+1] = args[i];
+ loc_args[i+1] = NULL;
+
+ pid = fork();
+ if (pid == -1)
+ return (-1);
+ if (pid == 0) {
+ /*
+ * Child.
+ */
+ execv(AUDITWARN_SCRIPT, loc_args);
+ syslog(LOG_ERR, "Could not exec %s (%m)\n",
+ AUDITWARN_SCRIPT);
+ exit(1);
+ }
+ /*
+ * Parent.
+ */
+ return (0);
+}
+
+/*
+ * Indicates that the hard limit for all filesystems has been exceeded.
+ */
+int
+audit_warn_allhard(void)
+{
+ char *args[2];
+
+ args[0] = HARDLIM_ALL_WARN;
+ args[1] = NULL;
+
+ return (auditwarnlog(args));
+}
+
+/*
+ * Indicates that the soft limit for all filesystems has been exceeded.
+ */
+int
+audit_warn_allsoft(void)
+{
+ char *args[2];
+
+ args[0] = SOFTLIM_ALL_WARN;
+ args[1] = NULL;
+
+ return (auditwarnlog(args));
+}
+
+/*
+ * Indicates that someone other than the audit daemon turned off auditing.
+ * XXX Its not clear at this point how this function will be invoked.
+ *
+ * XXXRW: This function is not used.
+ */
+int
+audit_warn_auditoff(void)
+{
+ char *args[2];
+
+ args[0] = AUDITOFF_WARN;
+ args[1] = NULL;
+
+ return (auditwarnlog(args));
+}
+
+/*
+ * Indicate that a trail file has been closed, so can now be post-processed.
+ */
+int
+audit_warn_closefile(char *filename)
+{
+ char *args[3];
+
+ args[0] = CLOSEFILE_WARN;
+ args[1] = filename;
+ args[2] = NULL;
+
+ return (auditwarnlog(args));
+}
+
+/*
+ * Indicates that the audit deammn is already running
+ */
+int
+audit_warn_ebusy(void)
+{
+ char *args[2];
+
+ args[0] = EBUSY_WARN;
+ args[1] = NULL;
+
+ return (auditwarnlog(args));
+}
+
+/*
+ * Indicates that there is a problem getting the directory from
+ * audit_control.
+ *
+ * XXX Note that we take the filename instead of a count as the argument here
+ * (different from BSM).
+ */
+int
+audit_warn_getacdir(char *filename)
+{
+ char *args[3];
+
+ args[0] = GETACDIR_WARN;
+ args[1] = filename;
+ args[2] = NULL;
+
+ return (auditwarnlog(args));
+}
+
+/*
+ * Indicates that the hard limit for this file has been exceeded.
+ */
+int
+audit_warn_hard(char *filename)
+{
+ char *args[3];
+
+ args[0] = HARDLIM_WARN;
+ args[1] = filename;
+ args[2] = NULL;
+
+ return (auditwarnlog(args));
+}
+
+/*
+ * Indicates that auditing could not be started.
+ */
+int
+audit_warn_nostart(void)
+{
+ char *args[2];
+
+ args[0] = NOSTART_WARN;
+ args[1] = NULL;
+
+ return (auditwarnlog(args));
+}
+
+/*
+ * Indicaes that an error occrred during the orderly shutdown of the audit
+ * daemon.
+ */
+int
+audit_warn_postsigterm(void)
+{
+ char *args[2];
+
+ args[0] = POSTSIGTERM_WARN;
+ args[1] = NULL;
+
+ return (auditwarnlog(args));
+}
+
+/*
+ * Indicates that the soft limit for this file has been exceeded.
+ */
+int
+audit_warn_soft(char *filename)
+{
+ char *args[3];
+
+ args[0] = SOFTLIM_WARN;
+ args[1] = filename;
+ args[2] = NULL;
+
+ return (auditwarnlog(args));
+}
+
+/*
+ * Indicates that the temporary audit file already exists indicating a fatal
+ * error.
+ */
+int
+audit_warn_tmpfile(void)
+{
+ char *args[2];
+
+ args[0] = TMPFILE_WARN;
+ args[1] = NULL;
+
+ return (auditwarnlog(args));
+}
+
+/*
+ * Indicates that this trail file has expired and was removed.
+ */
+int
+audit_warn_expired(char *filename)
+{
+ char *args[3];
+
+ args[0] = EXPIRED_WARN;
+ args[1] = filename;
+ args[2] = NULL;
+
+ return (auditwarnlog(args));
+}
Deleted: vendor/openbsm/1.2_alpha4/bin/auditd/auditd.8
===================================================================
--- vendor/openbsm/dist/bin/auditd/auditd.8 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/bin/auditd/auditd.8 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,113 +0,0 @@
-.\" Copyright (c) 2004 Apple Computer, Inc.
-.\" All rights reserved.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\"
-.\" 1. Redistributions of source code must retain the above copyright
-.\" notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\" notice, this list of conditions and the following disclaimer in the
-.\" documentation and/or other materials provided with the distribution.
-.\" 3. Neither the name of Apple Computer, Inc. ("Apple") nor the names of
-.\" its contributors may be used to endorse or promote products derived
-.\" from this software without specific prior written permission.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND ANY
-.\" EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-.\" WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-.\" DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR ANY
-.\" DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-.\" (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-.\" LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-.\" ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-.\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-.\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-.\"
-.\" $P4: //depot/projects/trustedbsd/openbsm/bin/auditd/auditd.8#13 $
-.\"
-.Dd October 2, 2006
-.Dt AUDITD 8
-.Os
-.Sh NAME
-.Nm auditd
-.Nd audit log management daemon
-.Sh SYNOPSIS
-.Nm
-.Op Fl d
-.Sh DESCRIPTION
-The
-.Nm
-daemon responds to requests from the
-.Xr audit 8
-utility and notifications
-from the kernel.
-It manages the resulting audit log files and specified
-log file locations.
-.Pp
-The options are as follows:
-.Bl -tag -width indent
-.It Fl d
-Starts the daemon in debug mode \[em] it will not daemonize.
-.El
-.Sh NOTE
-To assure uninterrupted audit support, the
-.Nm
-daemon should not be started and stopped manually.
-Instead, the
-.Xr audit 8
-command
-should be used to inform the daemon to change state/configuration after altering
-the
-.Pa audit_control
-file.
-.Pp
-.\" Sending a
-.\" .Dv SIGHUP
-.\" to a running
-.\" .Nm
-.\" daemon will force it to exit.
-Sending a
-.Dv SIGTERM
-to a running
-.Nm
-daemon will force it to exit.
-.Sh FILES
-.Bl -tag -width ".Pa /var/audit" -compact
-.It Pa /var/audit
-Default directory for storing audit log files.
-.El
-.Sh COMPATIBILITY
-The historical
-.Fl h
-and
-.Fl s
-flags are now configured using
-.Xr audit_control 5
-policy flags
-.Cm ahlt
-and
-.Cm cnt ,
-and are no longer available as arguments to
-.Nm .
-.Sh SEE ALSO
-.Xr audit 4 ,
-.Xr audit_control 5 ,
-.Xr audit 8
-.Sh HISTORY
-The OpenBSM implementation was created by McAfee Research, the security
-division of McAfee Inc., under contract to Apple Computer Inc.\& in 2004.
-It was subsequently adopted by the TrustedBSD Project as the foundation for
-the OpenBSM distribution.
-.Sh AUTHORS
-.An -nosplit
-This software was created by McAfee Research, the security research division
-of McAfee, Inc., under contract to Apple Computer Inc.
-Additional authors include
-.An Wayne Salamon ,
-.An Robert Watson ,
-and SPARTA Inc.
-.Pp
-The Basic Security Module (BSM) interface to audit records and audit event
-stream format were defined by Sun Microsystems.
Copied: vendor/openbsm/1.2_alpha4/bin/auditd/auditd.8 (from rev 11163, vendor/openbsm/dist/bin/auditd/auditd.8)
===================================================================
--- vendor/openbsm/1.2_alpha4/bin/auditd/auditd.8 (rev 0)
+++ vendor/openbsm/1.2_alpha4/bin/auditd/auditd.8 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,140 @@
+.\" Copyright (c) 2004 Apple Inc.
+.\" All rights reserved.
+.\"
+.\" Redistribution and use in source and binary forms, with or without
+.\" modification, are permitted provided that the following conditions
+.\" are met:
+.\"
+.\" 1. Redistributions of source code must retain the above copyright
+.\" notice, this list of conditions and the following disclaimer.
+.\" 2. Redistributions in binary form must reproduce the above copyright
+.\" notice, this list of conditions and the following disclaimer in the
+.\" documentation and/or other materials provided with the distribution.
+.\" 3. Neither the name of Apple Inc. ("Apple") nor the names of
+.\" its contributors may be used to endorse or promote products derived
+.\" from this software without specific prior written permission.
+.\"
+.\" THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND ANY
+.\" EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+.\" WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+.\" DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR ANY
+.\" DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+.\" (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+.\" LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+.\" ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+.\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+.\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+.\"
+.Dd July 25, 2015
+.Dt AUDITD 8
+.Os
+.Sh NAME
+.Nm auditd
+.Nd audit log management daemon
+.Sh SYNOPSIS
+.Nm
+.Op Fl d | l
+.Sh DESCRIPTION
+The
+.Nm
+daemon responds to requests from the
+.Xr audit 8
+utility and notifications
+from the kernel.
+It manages the resulting audit log files and specified
+log file locations.
+.Pp
+The options are as follows:
+.Bl -tag -width indent
+.It Fl d
+Starts the daemon in debug mode \[em] it will not daemonize.
+.It Fl l
+This option is for when
+.Nm
+is configured to start on-demand using
+.Xr launchd 8 .
+.El
+.Pp
+Optionally, the audit review group "audit" may be created.
+Non-privileged
+users that are members of this group may read the audit trail log files.
+.Sh NOTE
+To assure uninterrupted audit support, the
+.Nm
+daemon should not be started and stopped manually.
+Instead, the
+.Xr audit 8
+command
+should be used to inform the daemon to change state/configuration after altering
+the
+.Pa audit_control
+file.
+.Pp
+If
+.Nm
+is started on-demand by
+.Xr launchd 8
+then auditing should only be started and stopped with
+.Xr audit 8 .
+.Pp
+On Mac OS X,
+.Nm
+uses the
+.Xr asl 3
+API for writing system log messages.
+Therefore, only the audit administrator
+and members of the audit review group will be able to read the
+system log entries.
+.Sh FILES
+.Bl -tag -width ".Pa /etc/security" -compact
+.It Pa /var/audit
+Default directory for storing audit log files.
+.Pp
+.It Pa /etc/security
+The directory containing the auditing configuration files
+.Xr audit_class 5 ,
+.Xr audit_control 5 ,
+.Xr audit_event 5 ,
+and
+.Xr audit_warn 5 .
+.El
+.Sh COMPATIBILITY
+The historical
+.Fl h
+and
+.Fl s
+flags are now configured using
+.Xr audit_control 5
+policy flags
+.Cm ahlt
+and
+.Cm cnt ,
+and are no longer available as arguments to
+.Nm .
+.Sh SEE ALSO
+.Xr asl 3 ,
+.Xr libauditd 3 ,
+.Xr audit 4 ,
+.Xr audit_class 5 ,
+.Xr audit_control 5 ,
+.Xr audit_event 5 ,
+.Xr audit_warn 5 ,
+.Xr audit 8 ,
+.Xr auditdistd 8 ,
+.Xr launchd 8 (Mac OS X)
+.Sh HISTORY
+The OpenBSM implementation was created by McAfee Research, the security
+division of McAfee Inc., under contract to Apple Computer Inc.\& in 2004.
+It was subsequently adopted by the TrustedBSD Project as the foundation for
+the OpenBSM distribution.
+.Sh AUTHORS
+.An -nosplit
+This software was created by McAfee Research, the security research division
+of McAfee, Inc., under contract to Apple Computer Inc.
+Additional authors include
+.An Wayne Salamon ,
+.An Robert Watson ,
+and SPARTA Inc.
+.Pp
+The Basic Security Module (BSM) interface to audit records and audit event
+stream format were defined by Sun Microsystems.
Deleted: vendor/openbsm/1.2_alpha4/bin/auditd/auditd.c
===================================================================
--- vendor/openbsm/dist/bin/auditd/auditd.c 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/bin/auditd/auditd.c 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,933 +0,0 @@
-/*
- * Copyright (c) 2004 Apple Computer, Inc.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. Neither the name of Apple Computer, Inc. ("Apple") nor the names of
- * its contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * $P4: //depot/projects/trustedbsd/openbsm/bin/auditd/auditd.c#26 $
- */
-
-#include <sys/types.h>
-#include <sys/dirent.h>
-#include <sys/mman.h>
-#include <sys/queue.h>
-#include <sys/stat.h>
-#include <sys/wait.h>
-
-#include <bsm/audit.h>
-#include <bsm/audit_uevents.h>
-#include <bsm/libbsm.h>
-
-#include <err.h>
-#include <errno.h>
-#include <fcntl.h>
-#include <grp.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <time.h>
-#include <unistd.h>
-#include <signal.h>
-#include <string.h>
-#include <syslog.h>
-
-#include "auditd.h"
-
-#define NA_EVENT_STR_SIZE 25
-#define POL_STR_SIZE 128
-
-static int ret, minval;
-static char *lastfile = NULL;
-static int allhardcount = 0;
-static int triggerfd = 0;
-static int sigchlds, sigchlds_handled;
-static int sighups, sighups_handled;
-static int sigterms, sigterms_handled;
-
-static TAILQ_HEAD(, dir_ent) dir_q;
-
-static int config_audit_controls(void);
-
-/*
- * Error starting auditd
- */
-static void
-fail_exit(void)
-{
-
- audit_warn_nostart();
- exit(1);
-}
-
-/*
- * Free our local list of directory names.
- */
-static void
-free_dir_q(void)
-{
- struct dir_ent *dirent;
-
- while ((dirent = TAILQ_FIRST(&dir_q))) {
- TAILQ_REMOVE(&dir_q, dirent, dirs);
- free(dirent->dirname);
- free(dirent);
- }
-}
-
-/*
- * Generate the timestamp string.
- */
-static int
-getTSstr(char *buf, int len)
-{
- struct timeval ts;
- struct timezone tzp;
- time_t tt;
-
- if (gettimeofday(&ts, &tzp) != 0)
- return (-1);
- tt = (time_t)ts.tv_sec;
- if (!strftime(buf, len, "%Y%m%d%H%M%S", gmtime(&tt)))
- return (-1);
- return (0);
-}
-
-/*
- * Concat the directory name to the given file name.
- * XXX We should affix the hostname also
- */
-static char *
-affixdir(char *name, struct dir_ent *dirent)
-{
- char *fn;
- char *curdir;
- const char *sep = "/";
-
- curdir = dirent->dirname;
- syslog(LOG_DEBUG, "dir = %s", dirent->dirname);
-
- fn = malloc(strlen(curdir) + strlen(sep) + (2 * POSTFIX_LEN) + 1);
- if (fn == NULL)
- return (NULL);
- strcpy(fn, curdir);
- strcat(fn, sep);
- strcat(fn, name);
- return (fn);
-}
-
-/*
- * Close the previous audit trail file.
- */
-static int
-close_lastfile(char *TS)
-{
- char *ptr;
- char *oldname;
-
- if (lastfile != NULL) {
- oldname = (char *)malloc(strlen(lastfile) + 1);
- if (oldname == NULL)
- return (-1);
- strcpy(oldname, lastfile);
-
- /* Rename the last file -- append timestamp. */
- if ((ptr = strstr(lastfile, NOT_TERMINATED)) != NULL) {
- *ptr = '.';
- strcpy(ptr+1, TS);
- if (rename(oldname, lastfile) != 0)
- syslog(LOG_ERR,
- "Could not rename %s to %s: %m", oldname,
- lastfile);
- else {
- syslog(LOG_INFO, "renamed %s to %s",
- oldname, lastfile);
- audit_warn_closefile(lastfile);
- }
- }
- free(lastfile);
- free(oldname);
- lastfile = NULL;
- }
- return (0);
-}
-
-/*
- * Create the new audit file with appropriate permissions and ownership. Try
- * to clean up if something goes wrong.
- */
-static int
-#ifdef AUDIT_REVIEW_GROUP
-open_trail(const char *fname, uid_t uid, gid_t gid)
-#else
-open_trail(const char *fname)
-#endif
-{
- int error, fd;
-
- fd = open(fname, O_RDONLY | O_CREAT, S_IRUSR | S_IRGRP);
- if (fd < 0)
- return (-1);
-#ifdef AUDIT_REVIEW_GROUP
- if (fchown(fd, uid, gid) < 0) {
- error = errno;
- close(fd);
- (void)unlink(fname);
- errno = error;
- return (-1);
- }
-#endif
- return (fd);
-}
-
-/*
- * Create the new file name, swap with existing audit file.
- */
-static int
-swap_audit_file(void)
-{
- char timestr[2 * POSTFIX_LEN];
- char *fn;
- char TS[POSTFIX_LEN];
- struct dir_ent *dirent;
-#ifdef AUDIT_REVIEW_GROUP
- struct group *grp;
- gid_t gid;
- uid_t uid;
-#endif
- int error, fd;
-
- if (getTSstr(TS, POSTFIX_LEN) != 0)
- return (-1);
-
- strcpy(timestr, TS);
- strcat(timestr, NOT_TERMINATED);
-
-#ifdef AUDIT_REVIEW_GROUP
- /*
- * XXXRW: Currently, this code falls back to the daemon gid, which is
- * likely the wheel group. Is there a better way to deal with this?
- */
- grp = getgrnam(AUDIT_REVIEW_GROUP);
- if (grp == NULL) {
- syslog(LOG_INFO,
- "Audit review group '%s' not available, using daemon gid",
- AUDIT_REVIEW_GROUP);
- gid = -1;
- } else
- gid = grp->gr_gid;
- uid = getuid();
-#endif
-
- /* Try until we succeed. */
- while ((dirent = TAILQ_FIRST(&dir_q))) {
- if ((fn = affixdir(timestr, dirent)) == NULL) {
- syslog(LOG_INFO, "Failed to swap log at time %s",
- timestr);
- return (-1);
- }
-
- /*
- * Create and open the file; then close and pass to the
- * kernel if all went well.
- */
- syslog(LOG_INFO, "New audit file is %s", fn);
-#ifdef AUDIT_REVIEW_GROUP
- fd = open_trail(fn, uid, gid);
-#else
- fd = open_trail(fn);
-#endif
- if (fd < 0)
- warn("open(%s)", fn);
- if (fd >= 0) {
- error = auditctl(fn);
- if (error) {
- syslog(LOG_ERR,
- "auditctl failed setting log file! : %s",
- strerror(errno));
- close(fd);
- } else {
- /* Success. */
- close_lastfile(TS);
- lastfile = fn;
- close(fd);
- return (0);
- }
- }
-
- /*
- * Tell the administrator about lack of permissions for dir.
- */
- audit_warn_getacdir(dirent->dirname);
-
- /* Try again with a different directory. */
- TAILQ_REMOVE(&dir_q, dirent, dirs);
- free(dirent->dirname);
- free(dirent);
- }
- syslog(LOG_ERR, "Log directories exhausted");
- return (-1);
-}
-
-/*
- * Read the audit_control file contents.
- */
-static int
-read_control_file(void)
-{
- char cur_dir[MAXNAMLEN];
- struct dir_ent *dirent;
- au_qctrl_t qctrl;
-
- /*
- * Clear old values. Force a re-read of the file the next time.
- */
- free_dir_q();
- endac();
-
- /*
- * Read the list of directories into a local linked list.
- *
- * XXX We should use the reentrant interfaces once they are
- * available.
- */
- while (getacdir(cur_dir, MAXNAMLEN) >= 0) {
- dirent = (struct dir_ent *) malloc(sizeof(struct dir_ent));
- if (dirent == NULL)
- return (-1);
- dirent->softlim = 0;
- dirent->dirname = (char *) malloc(MAXNAMLEN);
- if (dirent->dirname == NULL) {
- free(dirent);
- return (-1);
- }
- strcpy(dirent->dirname, cur_dir);
- TAILQ_INSERT_TAIL(&dir_q, dirent, dirs);
- }
-
- allhardcount = 0;
- if (swap_audit_file() == -1) {
- syslog(LOG_ERR, "Could not swap audit file");
- /*
- * XXX Faulty directory listing? - user should be given
- * XXX an opportunity to change the audit_control file
- * XXX switch to a reduced mode of auditing?
- */
- return (-1);
- }
-
- /*
- * XXX There are synchronization problems here
- * XXX what should we do if a trigger for the earlier limit
- * XXX is generated here?
- */
- if (0 == (ret = getacmin(&minval))) {
- syslog(LOG_DEBUG, "min free = %d", minval);
- if (auditon(A_GETQCTRL, &qctrl, sizeof(qctrl)) != 0) {
- syslog(LOG_ERR,
- "could not get audit queue settings");
- return (-1);
- }
- qctrl.aq_minfree = minval;
- if (auditon(A_SETQCTRL, &qctrl, sizeof(qctrl)) != 0) {
- syslog(LOG_ERR,
- "could not set audit queue settings");
- return (-1);
- }
- }
-
- return (0);
-}
-
-/*
- * Close all log files, control files, and tell the audit system.
- */
-static int
-close_all(void)
-{
- struct auditinfo ai;
- int err_ret = 0;
- char TS[POSTFIX_LEN];
- int aufd;
- token_t *tok;
- long cond;
-
- /* Generate an audit record. */
- if ((aufd = au_open()) == -1)
- syslog(LOG_ERR, "Could not create audit shutdown event.");
- else {
- if ((tok = au_to_text("auditd::Audit shutdown")) != NULL)
- au_write(aufd, tok);
- /*
- * XXX we need to implement extended subject tokens so we can
- * effectively represent terminal lines with this token type.
- */
- bzero(&ai, sizeof(ai));
- if ((tok = au_to_subject32(getuid(), geteuid(), getegid(),
- getuid(), getgid(), getpid(), getpid(), &ai.ai_termid))
- != NULL)
- au_write(aufd, tok);
- if ((tok = au_to_return32(0, 0)) != NULL)
- au_write(aufd, tok);
- if (au_close(aufd, 1, AUE_audit_shutdown) == -1)
- syslog(LOG_ERR,
- "Could not close audit shutdown event.");
- }
-
- /* Flush contents. */
- cond = AUC_DISABLED;
- err_ret = auditon(A_SETCOND, &cond, sizeof(cond));
- if (err_ret != 0) {
- syslog(LOG_ERR, "Disabling audit failed! : %s",
- strerror(errno));
- err_ret = 1;
- }
- if (getTSstr(TS, POSTFIX_LEN) == 0)
- close_lastfile(TS);
- if (lastfile != NULL)
- free(lastfile);
-
- free_dir_q();
- if ((remove(AUDITD_PIDFILE) == -1) || err_ret) {
- syslog(LOG_ERR, "Could not unregister");
- audit_warn_postsigterm();
- return (1);
- }
- endac();
-
- if (close(triggerfd) != 0)
- syslog(LOG_ERR, "Error closing control file");
- syslog(LOG_INFO, "Finished");
- return (0);
-}
-
-/*
- * When we get a signal, we are often not at a clean point. So, little can
- * be done in the signal handler itself. Instead, we send a message to the
- * main servicing loop to do proper handling from a non-signal-handler
- * context.
- */
-static void
-relay_signal(int signal)
-{
-
- if (signal == SIGHUP)
- sighups++;
- if (signal == SIGTERM)
- sigterms++;
- if (signal == SIGCHLD)
- sigchlds++;
-}
-
-/*
- * Registering the daemon.
- */
-static int
-register_daemon(void)
-{
- FILE * pidfile;
- int fd;
- pid_t pid;
-
- /* Set up the signal hander. */
- if (signal(SIGTERM, relay_signal) == SIG_ERR) {
- syslog(LOG_ERR,
- "Could not set signal handler for SIGTERM");
- fail_exit();
- }
- if (signal(SIGCHLD, relay_signal) == SIG_ERR) {
- syslog(LOG_ERR,
- "Could not set signal handler for SIGCHLD");
- fail_exit();
- }
- if (signal(SIGHUP, relay_signal) == SIG_ERR) {
- syslog(LOG_ERR,
- "Could not set signal handler for SIGHUP");
- fail_exit();
- }
-
- if ((pidfile = fopen(AUDITD_PIDFILE, "a")) == NULL) {
- syslog(LOG_ERR, "Could not open PID file");
- audit_warn_tmpfile();
- return (-1);
- }
-
- /* Attempt to lock the pid file; if a lock is present, exit. */
- fd = fileno(pidfile);
- if (flock(fd, LOCK_EX | LOCK_NB) < 0) {
- syslog(LOG_ERR,
- "PID file is locked (is another auditd running?).");
- audit_warn_ebusy();
- return (-1);
- }
-
- pid = getpid();
- ftruncate(fd, 0);
- if (fprintf(pidfile, "%u\n", pid) < 0) {
- /* Should not start the daemon. */
- fail_exit();
- }
-
- fflush(pidfile);
- return (0);
-}
-
-/*
- * Handle the audit trigger event.
- *
- * We suppress (ignore) duplicated triggers in close succession in order to
- * try to avoid thrashing-like behavior. However, not all triggers can be
- * ignored, as triggers generally represent edge triggers, not level
- * triggers, and won't be retransmitted if the condition persists. Of
- * specific concern is the rotate trigger -- if one is dropped, then it will
- * not be retransmitted, and the log file will grow in an unbounded fashion.
- */
-#define DUPLICATE_INTERVAL 30
-static void
-handle_audit_trigger(int trigger)
-{
- static int last_trigger, last_warning;
- static time_t last_time;
- struct dir_ent *dirent;
- struct timeval ts;
- struct timezone tzp;
- time_t tt;
-
- /*
- * Suppress duplicate messages from the kernel within the specified
- * interval.
- */
- if (gettimeofday(&ts, &tzp) == 0) {
- tt = (time_t)ts.tv_sec;
- switch (trigger) {
- case AUDIT_TRIGGER_LOW_SPACE:
- case AUDIT_TRIGGER_NO_SPACE:
- /*
- * Triggers we can suppress. Of course, we also need
- * to rate limit the warnings, so apply the same
- * interval limit on syslog messages.
- */
- if ((trigger == last_trigger) &&
- (tt < (last_time + DUPLICATE_INTERVAL))) {
- if (tt >= (last_warning + DUPLICATE_INTERVAL))
- syslog(LOG_INFO,
- "Suppressing duplicate trigger %d",
- trigger);
- return;
- }
- last_warning = tt;
- break;
-
- case AUDIT_TRIGGER_ROTATE_KERNEL:
- case AUDIT_TRIGGER_ROTATE_USER:
- case AUDIT_TRIGGER_READ_FILE:
- /*
- * Triggers that we cannot suppress.
- */
- break;
- }
-
- /*
- * Only update last_trigger after aborting due to a duplicate
- * trigger, not before, or we will never allow that trigger
- * again.
- */
- last_trigger = trigger;
- last_time = tt;
- }
-
- /*
- * Message processing is done here.
- */
- dirent = TAILQ_FIRST(&dir_q);
- switch(trigger) {
- case AUDIT_TRIGGER_LOW_SPACE:
- syslog(LOG_INFO, "Got low space trigger");
- if (dirent && (dirent->softlim != 1)) {
- TAILQ_REMOVE(&dir_q, dirent, dirs);
- /* Add this node to the end of the list. */
- TAILQ_INSERT_TAIL(&dir_q, dirent, dirs);
- audit_warn_soft(dirent->dirname);
- dirent->softlim = 1;
-
- if (TAILQ_NEXT(TAILQ_FIRST(&dir_q), dirs) != NULL &&
- swap_audit_file() == -1)
- syslog(LOG_ERR, "Error swapping audit file");
-
- /*
- * Check if the next dir has already reached its soft
- * limit.
- */
- dirent = TAILQ_FIRST(&dir_q);
- if (dirent->softlim == 1) {
- /* All dirs have reached their soft limit. */
- audit_warn_allsoft();
- }
- } else {
- /*
- * Continue auditing to the current file. Also
- * generate an allsoft warning.
- *
- * XXX do we want to do this ?
- */
- audit_warn_allsoft();
- }
- break;
-
- case AUDIT_TRIGGER_NO_SPACE:
- syslog(LOG_INFO, "Got no space trigger");
-
- /* Delete current dir, go on to next. */
- TAILQ_REMOVE(&dir_q, dirent, dirs);
- audit_warn_hard(dirent->dirname);
- free(dirent->dirname);
- free(dirent);
-
- if (swap_audit_file() == -1)
- syslog(LOG_ERR, "Error swapping audit file");
-
- /* We are out of log directories. */
- audit_warn_allhard(++allhardcount);
- break;
-
- case AUDIT_TRIGGER_ROTATE_KERNEL:
- case AUDIT_TRIGGER_ROTATE_USER:
- /*
- * Create a new file and swap with the one being used in
- * kernel
- */
- syslog(LOG_INFO, "Got open new trigger from %s", trigger ==
- AUDIT_TRIGGER_ROTATE_KERNEL ? "kernel" : "user");
- if (swap_audit_file() == -1)
- syslog(LOG_ERR, "Error swapping audit file");
- break;
-
- case AUDIT_TRIGGER_READ_FILE:
- syslog(LOG_INFO, "Got read file trigger");
- if (read_control_file() == -1)
- syslog(LOG_ERR, "Error in audit control file");
- if (config_audit_controls() == -1)
- syslog(LOG_ERR, "Error setting audit controls");
- break;
-
- default:
- syslog(LOG_ERR, "Got unknown trigger %d", trigger);
- break;
- }
-}
-
-static void
-handle_sighup(void)
-{
-
- sighups_handled = sighups;
- config_audit_controls();
-}
-
-/*
- * Reap our children.
- */
-static void
-reap_children(void)
-{
- pid_t child;
- int wstatus;
-
- while ((child = waitpid(-1, &wstatus, WNOHANG)) > 0) {
- if (!wstatus)
- continue;
- syslog(LOG_INFO, "warn process [pid=%d] %s %d.", child,
- ((WIFEXITED(wstatus)) ? "exited with non-zero status" :
- "exited as a result of signal"),
- ((WIFEXITED(wstatus)) ? WEXITSTATUS(wstatus) :
- WTERMSIG(wstatus)));
- }
-}
-
-static void
-handle_sigchld(void)
-{
-
- sigchlds_handled = sigchlds;
- reap_children();
-}
-
-/*
- * Read the control file for triggers/signals and handle appropriately.
- */
-static int
-wait_for_events(void)
-{
- int num;
- unsigned int trigger;
-
- for (;;) {
- num = read(triggerfd, &trigger, sizeof(trigger));
- if ((num == -1) && (errno != EINTR)) {
- syslog(LOG_ERR, "%s: error %d", __FUNCTION__, errno);
- return (-1);
- }
- if (sigterms != sigterms_handled) {
- syslog(LOG_DEBUG, "%s: SIGTERM", __FUNCTION__);
- break;
- }
- if (sigchlds != sigchlds_handled)
- handle_sigchld();
- if (sighups != sighups_handled) {
- syslog(LOG_DEBUG, "%s: SIGHUP", __FUNCTION__);
- handle_sighup();
- }
- if ((num == -1) && (errno == EINTR))
- continue;
- if (num == 0) {
- syslog(LOG_ERR, "%s: read EOF", __FUNCTION__);
- return (-1);
- }
- if (trigger == AUDIT_TRIGGER_CLOSE_AND_DIE)
- break;
- else
- handle_audit_trigger(trigger);
- }
- return (close_all());
-}
-
-/*
- * Configure the audit controls in the kernel: the event to class mapping,
- * kernel preselection mask, etc.
- */
-static int
-config_audit_controls(void)
-{
- au_event_ent_t ev, *evp;
- au_evclass_map_t evc_map;
- au_mask_t aumask;
- int ctr = 0;
- char naeventstr[NA_EVENT_STR_SIZE];
- char polstr[POL_STR_SIZE];
- long policy;
- au_fstat_t au_fstat;
- size_t filesz;
-
- /*
- * Process the audit event file, obtaining a class mapping for each
- * event, and send that mapping into the kernel.
- *
- * XXX There's a risk here that the BSM library will return NULL
- * for an event when it can't properly map it to a class. In that
- * case, we will not process any events beyond the one that failed,
- * but should. We need a way to get a count of the events.
- */
- ev.ae_name = (char *)malloc(AU_EVENT_NAME_MAX);
- ev.ae_desc = (char *)malloc(AU_EVENT_DESC_MAX);
- if ((ev.ae_name == NULL) || (ev.ae_desc == NULL)) {
- if (ev.ae_name != NULL)
- free(ev.ae_name);
- syslog(LOG_ERR,
- "Memory allocation error when configuring audit controls.");
- return (-1);
- }
-
- /*
- * XXXRW: Currently we have no way to remove mappings from the kernel
- * when they are removed from the file-based mappings.
- */
- evp = &ev;
- setauevent();
- while ((evp = getauevent_r(evp)) != NULL) {
- evc_map.ec_number = evp->ae_number;
- evc_map.ec_class = evp->ae_class;
- if (auditon(A_SETCLASS, &evc_map, sizeof(au_evclass_map_t))
- != 0)
- syslog(LOG_ERR,
- "Failed to register class mapping for event %s",
- evp->ae_name);
- else
- ctr++;
- }
- endauevent();
- free(ev.ae_name);
- free(ev.ae_desc);
- if (ctr == 0)
- syslog(LOG_ERR, "No events to class mappings registered.");
- else
- syslog(LOG_DEBUG, "Registered %d event to class mappings.",
- ctr);
-
- /*
- * Get the non-attributable event string and set the kernel mask from
- * that.
- */
- if ((getacna(naeventstr, NA_EVENT_STR_SIZE) == 0) &&
- (getauditflagsbin(naeventstr, &aumask) == 0)) {
- if (auditon(A_SETKMASK, &aumask, sizeof(au_mask_t)))
- syslog(LOG_ERR,
- "Failed to register non-attributable event mask.");
- else
- syslog(LOG_DEBUG,
- "Registered non-attributable event mask.");
- } else
- syslog(LOG_ERR,
- "Failed to obtain non-attributable event mask.");
-
- /*
- * If a policy is configured in audit_control(5), implement the
- * policy. However, if one isn't defined, set AUDIT_CNT to avoid
- * leaving the system in a fragile state.
- */
- if ((getacpol(polstr, POL_STR_SIZE) == 0) &&
- (au_strtopol(polstr, &policy) == 0)) {
- if (auditon(A_SETPOLICY, &policy, sizeof(policy)))
- syslog(LOG_ERR, "Failed to set audit policy: %m");
- } else {
- syslog(LOG_ERR, "Failed to obtain policy flags: %m");
- policy = AUDIT_CNT;
- if (auditon(A_SETPOLICY, &policy, sizeof(policy)))
- syslog(LOG_ERR,
- "Failed to set default audit policy: %m");
- }
-
- /*
- * Set trail rotation size.
- */
- if (getacfilesz(&filesz) == 0) {
- bzero(&au_fstat, sizeof(au_fstat));
- au_fstat.af_filesz = filesz;
- if (auditon(A_SETFSIZE, &au_fstat, sizeof(au_fstat)) < 0)
- syslog(LOG_ERR, "Failed to set filesz: %m");
- } else
- syslog(LOG_ERR, "Failed to obtain filesz: %m");
-
- return (0);
-}
-
-static void
-setup(void)
-{
- struct auditinfo ai;
- auditinfo_t auinfo;
- int aufd;
- token_t *tok;
-
- if ((triggerfd = open(AUDIT_TRIGGER_FILE, O_RDONLY, 0)) < 0) {
- syslog(LOG_ERR, "Error opening trigger file");
- fail_exit();
- }
-
- /*
- * To provide event feedback cycles and avoid auditd becoming
- * stalled if auditing is suspended, auditd and its children run
- * without their events being audited. We allow the uid, tid, and
- * mask fields to be implicitly set to zero, but do set the pid. We
- * run this after opening the trigger device to avoid configuring
- * audit state without audit present in the system.
- *
- * XXXRW: Is there more to it than this?
- */
- bzero(&auinfo, sizeof(auinfo));
- auinfo.ai_asid = getpid();
- if (setaudit(&auinfo) == -1) {
- syslog(LOG_ERR, "Error setting audit stat");
- fail_exit();
- }
-
- TAILQ_INIT(&dir_q);
- if (read_control_file() == -1) {
- syslog(LOG_ERR, "Error reading control file");
- fail_exit();
- }
-
- /* Generate an audit record. */
- if ((aufd = au_open()) == -1)
- syslog(LOG_ERR, "Could not create audit startup event.");
- else {
- /*
- * XXXCSJP Perhaps we want more robust audit records for
- * audit start up and shutdown. This might include capturing
- * failures to initialize the audit subsystem?
- */
- bzero(&ai, sizeof(ai));
- if ((tok = au_to_subject32(getuid(), geteuid(), getegid(),
- getuid(), getgid(), getpid(), getpid(), &ai.ai_termid))
- != NULL)
- au_write(aufd, tok);
- if ((tok = au_to_text("auditd::Audit startup")) != NULL)
- au_write(aufd, tok);
- if ((tok = au_to_return32(0, 0)) != NULL)
- au_write(aufd, tok);
- if (au_close(aufd, 1, AUE_audit_startup) == -1)
- syslog(LOG_ERR,
- "Could not close audit startup event.");
- }
-
- if (config_audit_controls() == 0)
- syslog(LOG_INFO, "Audit controls init successful");
- else
- syslog(LOG_ERR, "Audit controls init failed");
-}
-
-int
-main(int argc, char **argv)
-{
- int ch;
- int debug = 0;
- int rc;
-
- while ((ch = getopt(argc, argv, "d")) != -1) {
- switch(ch) {
- case 'd':
- /* Debug option. */
- debug = 1;
- break;
-
- case '?':
- default:
- (void)fprintf(stderr,
- "usage: auditd [-d] \n");
- exit(1);
- }
- }
-
-#ifdef LOG_SECURITY
- openlog("auditd", LOG_CONS | LOG_PID, LOG_SECURITY);
-#else
- openlog("auditd", LOG_CONS | LOG_PID, LOG_AUTH);
-#endif
- syslog(LOG_INFO, "starting...");
-
- if (debug == 0 && daemon(0, 0) == -1) {
- syslog(LOG_ERR, "Failed to daemonize");
- exit(1);
- }
-
- if (register_daemon() == -1) {
- syslog(LOG_ERR, "Could not register as daemon");
- exit(1);
- }
-
- setup();
-
- rc = wait_for_events();
- syslog(LOG_INFO, "auditd exiting.");
-
- exit(rc);
-}
Copied: vendor/openbsm/1.2_alpha4/bin/auditd/auditd.c (from rev 11163, vendor/openbsm/dist/bin/auditd/auditd.c)
===================================================================
--- vendor/openbsm/1.2_alpha4/bin/auditd/auditd.c (rev 0)
+++ vendor/openbsm/1.2_alpha4/bin/auditd/auditd.c 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,850 @@
+/*-
+ * Copyright (c) 2004-2009 Apple Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of Apple Inc. ("Apple") nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <sys/types.h>
+
+#include <config/config.h>
+
+#include <sys/dirent.h>
+#ifdef HAVE_FULL_QUEUE_H
+#include <sys/queue.h>
+#else /* !HAVE_FULL_QUEUE_H */
+#include <compat/queue.h>
+#endif /* !HAVE_FULL_QUEUE_H */
+#include <sys/mman.h>
+#include <sys/param.h>
+#include <sys/stat.h>
+#include <sys/wait.h>
+
+#include <bsm/audit.h>
+#include <bsm/audit_uevents.h>
+#include <bsm/auditd_lib.h>
+#include <bsm/libbsm.h>
+
+#include <err.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <grp.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <time.h>
+#include <unistd.h>
+#include <signal.h>
+#include <string.h>
+
+#include "auditd.h"
+
+#ifndef HAVE_STRLCPY
+#include <compat/strlcpy.h>
+#endif
+
+/*
+ * XXX The following are temporary until these can be added to the kernel
+ * audit.h header.
+ */
+#ifndef AUDIT_TRIGGER_INITIALIZE
+#define AUDIT_TRIGGER_INITIALIZE 7
+#endif
+#ifndef AUDIT_TRIGGER_EXPIRE_TRAILS
+#define AUDIT_TRIGGER_EXPIRE_TRAILS 8
+#endif
+
+
+/*
+ * LaunchD flag (Mac OS X and, maybe, FreeBSD only.) See launchd(8) and
+ * http://wiki.freebsd.org/launchd for more information.
+ *
+ * In order for auditd to work "on demand" with launchd(8) it can't:
+ * call daemon(3)
+ * call fork and having the parent process exit
+ * change uids or gids.
+ * set up the current working directory or chroot.
+ * set the session id
+ * change stdio to /dev/null.
+ * call setrusage(2)
+ * call setpriority(2)
+ * Ignore SIGTERM.
+ * auditd (in 'launchd mode') is launched on demand so it must catch
+ * SIGTERM to exit cleanly.
+ */
+static int launchd_flag = 0;
+
+/*
+ * The GID of the audit review group (if used). The audit trail files and
+ * system logs (Mac OS X only) can only be reviewed by members of this group
+ * or the audit administrator (aka. "root").
+ */
+static gid_t audit_review_gid = -1;
+
+/*
+ * The path and file name of the last audit trail file.
+ */
+static char *lastfile = NULL;
+
+/*
+ * Error starting auditd. Run warn script and exit.
+ */
+static void
+fail_exit(void)
+{
+
+ audit_warn_nostart();
+ exit(1);
+}
+
+/*
+ * Follow the 'current' symlink to get the active trail file name.
+ */
+static char *
+get_curfile(void)
+{
+ char *cf;
+ int len;
+
+ cf = malloc(MAXPATHLEN);
+ if (cf == NULL) {
+ auditd_log_err("malloc failed: %m");
+ return (NULL);
+ }
+
+ len = readlink(AUDIT_CURRENT_LINK, cf, MAXPATHLEN - 1);
+ if (len < 0) {
+ free(cf);
+ return (NULL);
+ }
+
+ /* readlink() doesn't terminate string. */
+ cf[len] = '\0';
+
+ return (cf);
+}
+
+/*
+ * Close the previous audit trail file.
+ */
+static int
+close_lastfile(char *TS)
+{
+ char *ptr;
+ char *oldname;
+
+ /* If lastfile is NULL try to get it from the 'current' link. */
+ if (lastfile == NULL)
+ lastfile = get_curfile();
+
+ if (lastfile != NULL) {
+ oldname = strdup(lastfile);
+ if (oldname == NULL)
+ return (-1);
+
+ /* Rename the last file -- append timestamp. */
+ if ((ptr = strstr(lastfile, NOT_TERMINATED)) != NULL) {
+ memcpy(ptr, TS, POSTFIX_LEN);
+ if (auditd_rename(oldname, lastfile) != 0)
+ auditd_log_err(
+ "Could not rename %s to %s: %m", oldname,
+ lastfile);
+ else {
+ /*
+ * Remove the 'current' symlink since the link
+ * is now invalid.
+ */
+ (void) unlink(AUDIT_CURRENT_LINK);
+ auditd_log_notice("renamed %s to %s",
+ oldname, lastfile);
+ audit_warn_closefile(lastfile);
+ }
+ } else
+ auditd_log_err("Could not rename %s to %s", oldname,
+ lastfile);
+ free(lastfile);
+ free(oldname);
+ lastfile = NULL;
+ }
+ return (0);
+}
+
+/*
+ * Create the new file name, swap with existing audit file.
+ */
+static int
+swap_audit_file(void)
+{
+ int err;
+ char *newfile, *name;
+ char TS[TIMESTAMP_LEN + 1];
+ time_t tt;
+
+ if (getTSstr(tt, TS, sizeof(TS)) != 0)
+ return (-1);
+ /*
+ * If prefix and suffix are the same, it means that records are
+ * being produced too fast. We don't want to rename now, because
+ * next trail file can get the same name and once that one is
+ * terminated also within one second it will overwrite the current
+ * one. Just keep writing to the same trail and wait for the next
+ * trigger from the kernel.
+ * FREEBSD KERNEL WAS UPDATED TO KEEP SENDING TRIGGERS, WHICH MIGHT
+ * NOT BE THE CASE FOR OTHER OSES.
+ * If the kernel will not keep sending triggers, trail file will not
+ * be terminated.
+ */
+ if (lastfile == NULL) {
+ name = NULL;
+ } else {
+ name = strrchr(lastfile, '/');
+ if (name != NULL)
+ name++;
+ }
+ if (name != NULL && strncmp(name, TS, TIMESTAMP_LEN) == 0) {
+ auditd_log_debug("Not ready to terminate trail file yet.");
+ return (0);
+ }
+ err = auditd_swap_trail(TS, &newfile, audit_review_gid,
+ audit_warn_getacdir);
+ if (err != ADE_NOERR) {
+ auditd_log_err("%s: %m", auditd_strerror(err));
+ if (err != ADE_ACTL)
+ return (-1);
+ }
+
+ /*
+ * Only close the last file if were in an auditing state before
+ * calling swap_audit_file(). We may need to recover from a crash.
+ */
+ if (auditd_get_state() == AUD_STATE_ENABLED)
+ close_lastfile(TS);
+
+
+ /*
+ * auditd_swap_trail() potentially enables auditing (if not already
+ * enabled) so updated the cached state as well.
+ */
+ auditd_set_state(AUD_STATE_ENABLED);
+
+ /*
+ * Create 'current' symlink. Recover from crash, if needed.
+ */
+ if (auditd_new_curlink(newfile) != 0)
+ auditd_log_err("auditd_new_curlink(\"%s\") failed: %s: %m",
+ newfile, auditd_strerror(err));
+
+ lastfile = newfile;
+ auditd_log_notice("New audit file is %s", newfile);
+
+ return (0);
+}
+
+/*
+ * Create a new audit log trail file and swap with the current one, if any.
+ */
+static int
+do_trail_file(void)
+{
+ int err;
+
+ /*
+ * First, refresh the list of audit log directories.
+ */
+ err = auditd_read_dirs(audit_warn_soft, audit_warn_hard);
+ if (err) {
+ auditd_log_err("auditd_read_dirs(): %s",
+ auditd_strerror(err));
+ if (err == ADE_HARDLIM)
+ audit_warn_allhard();
+ if (err != ADE_SOFTLIM)
+ return (-1);
+ else
+ audit_warn_allsoft();
+ /* continue on with soft limit error */
+ }
+
+ /*
+ * Create a new file and swap with the one being used in kernel.
+ */
+ if (swap_audit_file() == -1) {
+ /*
+ * XXX Faulty directory listing? - user should be given
+ * XXX an opportunity to change the audit_control file
+ * XXX switch to a reduced mode of auditing?
+ */
+ return (-1);
+ }
+
+ /*
+ * Finally, see if there are any trail files to expire.
+ */
+ err = auditd_expire_trails(audit_warn_expired);
+ if (err)
+ auditd_log_err("auditd_expire_trails(): %s",
+ auditd_strerror(err));
+
+ return (0);
+}
+
+/*
+ * Start up auditing.
+ */
+static void
+audit_setup(void)
+{
+ int err;
+
+ /* Configure trail files distribution. */
+ err = auditd_set_dist();
+ if (err) {
+ auditd_log_err("auditd_set_dist() %s: %m",
+ auditd_strerror(err));
+ } else
+ auditd_log_debug("Configured trail files distribution.");
+
+ if (do_trail_file() == -1) {
+ auditd_log_err("Error creating audit trail file");
+ fail_exit();
+ }
+
+ /* Generate an audit record. */
+ err = auditd_gen_record(AUE_audit_startup, NULL);
+ if (err)
+ auditd_log_err("auditd_gen_record(AUE_audit_startup) %s: %m",
+ auditd_strerror(err));
+
+ if (auditd_config_controls() == 0)
+ auditd_log_info("Audit controls init successful");
+ else
+ auditd_log_err("Audit controls init failed");
+}
+
+
+/*
+ * Close auditd pid file and trigger mechanism.
+ */
+static int
+close_misc(void)
+{
+
+ auditd_close_dirs();
+ if (unlink(AUDITD_PIDFILE) == -1 && errno != ENOENT) {
+ auditd_log_err("Couldn't remove %s: %m", AUDITD_PIDFILE);
+ return (1);
+ }
+ endac();
+
+ if (auditd_close_trigger() != 0) {
+ auditd_log_err("Error closing trigger messaging mechanism");
+ return (1);
+ }
+ return (0);
+}
+
+/*
+ * Close all log files, control files, and tell the audit system.
+ */
+static int
+close_all(void)
+{
+ int err_ret = 0;
+ char TS[TIMESTAMP_LEN + 1];
+ int err;
+ int cond;
+ time_t tt;
+
+ err = auditd_gen_record(AUE_audit_shutdown, NULL);
+ if (err)
+ auditd_log_err("auditd_gen_record(AUE_audit_shutdown) %s: %m",
+ auditd_strerror(err));
+
+ /* Flush contents. */
+ cond = AUC_DISABLED;
+ err_ret = audit_set_cond(&cond);
+ if (err_ret != 0) {
+ auditd_log_err("Disabling audit failed! : %s", strerror(errno));
+ err_ret = 1;
+ }
+
+ /*
+ * Updated the cached state that auditing has been disabled.
+ */
+ auditd_set_state(AUD_STATE_DISABLED);
+
+ if (getTSstr(tt, TS, sizeof(TS)) == 0)
+ close_lastfile(TS);
+ if (lastfile != NULL)
+ free(lastfile);
+
+ err_ret += close_misc();
+
+ if (err_ret) {
+ auditd_log_err("Could not unregister");
+ audit_warn_postsigterm();
+ }
+
+ auditd_log_info("Finished");
+ return (err_ret);
+}
+
+/*
+ * Register the daemon with the signal handler and the auditd pid file.
+ */
+static int
+register_daemon(void)
+{
+ FILE * pidfile;
+ int fd;
+ pid_t pid;
+
+ /* Set up the signal hander. */
+ if (signal(SIGTERM, auditd_relay_signal) == SIG_ERR) {
+ auditd_log_err(
+ "Could not set signal handler for SIGTERM");
+ fail_exit();
+ }
+ if (signal(SIGCHLD, auditd_relay_signal) == SIG_ERR) {
+ auditd_log_err(
+ "Could not set signal handler for SIGCHLD");
+ fail_exit();
+ }
+ if (signal(SIGHUP, auditd_relay_signal) == SIG_ERR) {
+ auditd_log_err(
+ "Could not set signal handler for SIGHUP");
+ fail_exit();
+ }
+ if (signal(SIGALRM, auditd_relay_signal) == SIG_ERR) {
+ auditd_log_err(
+ "Could not set signal handler for SIGALRM");
+ fail_exit();
+ }
+
+ if ((pidfile = fopen(AUDITD_PIDFILE, "a")) == NULL) {
+ auditd_log_err("Could not open PID file");
+ audit_warn_tmpfile();
+ return (-1);
+ }
+
+ /* Attempt to lock the pid file; if a lock is present, exit. */
+ fd = fileno(pidfile);
+ if (flock(fd, LOCK_EX | LOCK_NB) < 0) {
+ auditd_log_err(
+ "PID file is locked (is another auditd running?).");
+ audit_warn_ebusy();
+ return (-1);
+ }
+
+ pid = getpid();
+ ftruncate(fd, 0);
+ if (fprintf(pidfile, "%u\n", pid) < 0) {
+ /* Should not start the daemon. */
+ fail_exit();
+ }
+
+ fflush(pidfile);
+ return (0);
+}
+
+/*
+ * Handle the audit trigger event.
+ *
+ * We suppress (ignore) duplicated triggers in close succession in order to
+ * try to avoid thrashing-like behavior. However, not all triggers can be
+ * ignored, as triggers generally represent edge triggers, not level
+ * triggers, and won't be retransmitted if the condition persists. Of
+ * specific concern is the rotate trigger -- if one is dropped, then it will
+ * not be retransmitted, and the log file will grow in an unbounded fashion.
+ */
+#define DUPLICATE_INTERVAL 30
+void
+auditd_handle_trigger(int trigger)
+{
+ static int last_trigger, last_warning;
+ static time_t last_time;
+ struct timeval ts;
+ struct timezone tzp;
+ time_t tt;
+ int au_state;
+ int err = 0;
+
+ /*
+ * Suppress duplicate messages from the kernel within the specified
+ * interval.
+ */
+ if (gettimeofday(&ts, &tzp) == 0) {
+ tt = (time_t)ts.tv_sec;
+ switch (trigger) {
+ case AUDIT_TRIGGER_LOW_SPACE:
+ case AUDIT_TRIGGER_NO_SPACE:
+ /*
+ * Triggers we can suppress. Of course, we also need
+ * to rate limit the warnings, so apply the same
+ * interval limit on syslog messages.
+ */
+ if ((trigger == last_trigger) &&
+ (tt < (last_time + DUPLICATE_INTERVAL))) {
+ if (tt >= (last_warning + DUPLICATE_INTERVAL))
+ auditd_log_info(
+ "Suppressing duplicate trigger %d",
+ trigger);
+ return;
+ }
+ last_warning = tt;
+ break;
+
+ case AUDIT_TRIGGER_ROTATE_KERNEL:
+ case AUDIT_TRIGGER_ROTATE_USER:
+ case AUDIT_TRIGGER_READ_FILE:
+ case AUDIT_TRIGGER_CLOSE_AND_DIE:
+ case AUDIT_TRIGGER_INITIALIZE:
+ /*
+ * Triggers that we cannot suppress.
+ */
+ break;
+ }
+
+ /*
+ * Only update last_trigger after aborting due to a duplicate
+ * trigger, not before, or we will never allow that trigger
+ * again.
+ */
+ last_trigger = trigger;
+ last_time = tt;
+ }
+
+ au_state = auditd_get_state();
+
+ /*
+ * Message processing is done here.
+ */
+ switch(trigger) {
+ case AUDIT_TRIGGER_LOW_SPACE:
+ auditd_log_notice("Got low space trigger");
+ if (do_trail_file() == -1)
+ auditd_log_err("Error swapping audit file");
+ break;
+
+ case AUDIT_TRIGGER_NO_SPACE:
+ auditd_log_notice("Got no space trigger");
+ if (do_trail_file() == -1)
+ auditd_log_err("Error swapping audit file");
+ break;
+
+ case AUDIT_TRIGGER_ROTATE_KERNEL:
+ case AUDIT_TRIGGER_ROTATE_USER:
+ auditd_log_info("Got open new trigger from %s", trigger ==
+ AUDIT_TRIGGER_ROTATE_KERNEL ? "kernel" : "user");
+ if (au_state == AUD_STATE_ENABLED && do_trail_file() == -1)
+ auditd_log_err("Error swapping audit file");
+ break;
+
+ case AUDIT_TRIGGER_READ_FILE:
+ auditd_log_info("Got read file trigger");
+ if (au_state == AUD_STATE_ENABLED) {
+ if (auditd_config_controls() == -1)
+ auditd_log_err("Error setting audit controls");
+ else if (do_trail_file() == -1)
+ auditd_log_err("Error swapping audit file");
+ }
+ break;
+
+ case AUDIT_TRIGGER_CLOSE_AND_DIE:
+ auditd_log_info("Got close and die trigger");
+ if (au_state == AUD_STATE_ENABLED)
+ err = close_all();
+ /*
+ * Running under launchd don't exit. Wait for launchd to
+ * send SIGTERM.
+ */
+ if (!launchd_flag) {
+ auditd_log_info("auditd exiting.");
+ exit (err);
+ }
+ break;
+
+ case AUDIT_TRIGGER_INITIALIZE:
+ auditd_log_info("Got audit initialize trigger");
+ if (au_state == AUD_STATE_DISABLED)
+ audit_setup();
+ break;
+
+ case AUDIT_TRIGGER_EXPIRE_TRAILS:
+ auditd_log_info("Got audit expire trails trigger");
+ err = auditd_expire_trails(audit_warn_expired);
+ if (err)
+ auditd_log_err("auditd_expire_trails(): %s",
+ auditd_strerror(err));
+ break;
+
+ default:
+ auditd_log_err("Got unknown trigger %d", trigger);
+ break;
+ }
+}
+
+/*
+ * Reap our children.
+ */
+void
+auditd_reap_children(void)
+{
+ pid_t child;
+ int wstatus;
+
+ while ((child = waitpid(-1, &wstatus, WNOHANG)) > 0) {
+ if (!wstatus)
+ continue;
+ auditd_log_info("warn process [pid=%d] %s %d.", child,
+ ((WIFEXITED(wstatus)) ? "exited with non-zero status" :
+ "exited as a result of signal"),
+ ((WIFEXITED(wstatus)) ? WEXITSTATUS(wstatus) :
+ WTERMSIG(wstatus)));
+ }
+}
+
+/*
+ * Reap any children and terminate. If under launchd don't shutdown auditing
+ * but just the other stuff.
+ */
+void
+auditd_terminate(void)
+{
+ int ret;
+
+ auditd_reap_children();
+
+ if (launchd_flag)
+ ret = close_misc();
+ else
+ ret = close_all();
+
+ exit(ret);
+}
+
+/*
+ * Configure the audit controls in the kernel: the event to class mapping,
+ * kernel preselection mask, etc.
+ */
+int
+auditd_config_controls(void)
+{
+ int cnt, err;
+ int ret = 0;
+
+ /*
+ * Configure event to class mappings in kernel.
+ */
+ cnt = auditd_set_evcmap();
+ if (cnt < 0) {
+ auditd_log_err("auditd_set_evcmap() failed: %m");
+ ret = -1;
+ } else if (cnt == 0) {
+ auditd_log_err("No events to class mappings registered.");
+ ret = -1;
+ } else
+ auditd_log_debug("Registered %d event to class mappings.", cnt);
+
+ /*
+ * Configure non-attributable event mask in kernel.
+ */
+ err = auditd_set_namask();
+ if (err) {
+ auditd_log_err("auditd_set_namask() %s: %m",
+ auditd_strerror(err));
+ ret = -1;
+ } else
+ auditd_log_debug("Registered non-attributable event mask.");
+
+ /*
+ * Configure audit policy in kernel.
+ */
+ err = auditd_set_policy();
+ if (err) {
+ auditd_log_err("auditd_set_policy() %s: %m",
+ auditd_strerror(err));
+ ret = -1;
+ } else
+ auditd_log_debug("Set audit policy in kernel.");
+
+ /*
+ * Configure audit trail log size in kernel.
+ */
+ err = auditd_set_fsize();
+ if (err) {
+ auditd_log_err("audit_set_fsize() %s: %m",
+ auditd_strerror(err));
+ ret = -1;
+ } else
+ auditd_log_debug("Set audit trail size in kernel.");
+
+ /*
+ * Configure audit trail volume minimum free percentage of blocks in
+ * kernel.
+ */
+ err = auditd_set_minfree();
+ if (err) {
+ auditd_log_err("auditd_set_minfree() %s: %m",
+ auditd_strerror(err));
+ ret = -1;
+ } else
+ auditd_log_debug(
+ "Set audit trail min free percent in kernel.");
+
+ /*
+ * Configure host address in the audit kernel information.
+ */
+ err = auditd_set_host();
+ if (err) {
+ if (err == ADE_PARSE) {
+ auditd_log_notice(
+ "audit_control(5) may be missing 'host:' field");
+ } else {
+ auditd_log_err("auditd_set_host() %s: %m",
+ auditd_strerror(err));
+ ret = -1;
+ }
+ } else
+ auditd_log_debug(
+ "Set audit host address information in kernel.");
+
+ return (ret);
+}
+
+/*
+ * Setup and initialize auditd.
+ */
+static void
+setup(void)
+{
+ int err;
+
+ if (auditd_open_trigger(launchd_flag) < 0) {
+ auditd_log_err("Error opening trigger messaging mechanism");
+ fail_exit();
+ }
+
+ /*
+ * To prevent event feedback cycles and avoid auditd becoming
+ * stalled if auditing is suspended, auditd and its children run
+ * without their events being audited. We allow the uid, tid, and
+ * mask fields to be implicitly set to zero, but do set the pid. We
+ * run this after opening the trigger device to avoid configuring
+ * audit state without audit present in the system.
+ */
+ err = auditd_prevent_audit();
+ if (err) {
+ auditd_log_err("auditd_prevent_audit() %s: %m",
+ auditd_strerror(err));
+ fail_exit();
+ }
+
+ /*
+ * Make sure auditd auditing state is correct.
+ */
+ auditd_set_state(AUD_STATE_INIT);
+
+ /*
+ * If under launchd, don't start auditing. Wait for a trigger to
+ * do so.
+ */
+ if (!launchd_flag)
+ audit_setup();
+}
+
+int
+main(int argc, char **argv)
+{
+ int ch;
+ int debug = 0;
+#ifdef AUDIT_REVIEW_GROUP
+ struct group *grp;
+#endif
+
+ while ((ch = getopt(argc, argv, "dl")) != -1) {
+ switch(ch) {
+ case 'd':
+ /* Debug option. */
+ debug = 1;
+ break;
+
+ case 'l':
+ /* Be launchd friendly. */
+ launchd_flag = 1;
+ break;
+
+ case '?':
+ default:
+ (void)fprintf(stderr,
+ "usage: auditd [-d] [-l]\n");
+ exit(1);
+ }
+ }
+
+ audit_review_gid = getgid();
+
+#ifdef AUDIT_REVIEW_GROUP
+ /*
+ * XXXRW: Currently, this code falls back to the daemon gid, which is
+ * likely the wheel group. Is there a better way to deal with this?
+ */
+ grp = getgrnam(AUDIT_REVIEW_GROUP);
+ if (grp != NULL)
+ audit_review_gid = grp->gr_gid;
+#endif
+
+ auditd_openlog(debug, audit_review_gid);
+
+ if (launchd_flag)
+ auditd_log_info("started by launchd...");
+ else
+ auditd_log_info("starting...");
+
+#ifdef AUDIT_REVIEW_GROUP
+ if (grp == NULL)
+ auditd_log_info(
+ "Audit review group '%s' not available, using daemon gid (%d)",
+ AUDIT_REVIEW_GROUP, audit_review_gid);
+#endif
+ if (debug == 0 && launchd_flag == 0 && daemon(0, 0) == -1) {
+ auditd_log_err("Failed to daemonize");
+ exit(1);
+ }
+
+ if (register_daemon() == -1) {
+ auditd_log_err("Could not register as daemon");
+ exit(1);
+ }
+
+ setup();
+
+ /*
+ * auditd_wait_for_events() shouldn't return unless something is wrong.
+ */
+ auditd_wait_for_events();
+
+ auditd_log_err("abnormal exit.");
+ close_all();
+ exit(-1);
+}
Deleted: vendor/openbsm/1.2_alpha4/bin/auditd/auditd.h
===================================================================
--- vendor/openbsm/dist/bin/auditd/auditd.h 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/bin/auditd/auditd.h 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,85 +0,0 @@
-/*
- * Copyright (c) 2005 Apple Computer, Inc.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. Neither the name of Apple Computer, Inc. ("Apple") nor the names of
- * its contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * $P4: //depot/projects/trustedbsd/openbsm/bin/auditd/auditd.h#8 $
- */
-
-#ifndef _AUDITD_H_
-#define _AUDITD_H_
-
-#include <sys/types.h>
-#include <sys/queue.h>
-#include <syslog.h>
-
-#define MAX_DIR_SIZE 255
-#define AUDITD_NAME "auditd"
-
-/*
- * If defined, then the audit daemon will attempt to chown newly created logs
- * to this group. Otherwise, they will be the default for the user running
- * auditd, likely the audit group.
- */
-#define AUDIT_REVIEW_GROUP "audit"
-
-#define POSTFIX_LEN 16
-#define NOT_TERMINATED ".not_terminated"
-
-struct dir_ent {
- char *dirname;
- char softlim;
- TAILQ_ENTRY(dir_ent) dirs;
-};
-
-#define HARDLIM_ALL_WARN "allhard"
-#define SOFTLIM_ALL_WARN "allsoft"
-#define AUDITOFF_WARN "auditoff"
-#define CLOSEFILE_WARN "closefile"
-#define EBUSY_WARN "ebusy"
-#define GETACDIR_WARN "getacdir"
-#define HARDLIM_WARN "hard"
-#define NOSTART_WARN "nostart"
-#define POSTSIGTERM_WARN "postsigterm"
-#define SOFTLIM_WARN "soft"
-#define TMPFILE_WARN "tmpfile"
-
-#define AUDITWARN_SCRIPT "/etc/security/audit_warn"
-#define AUDITD_PIDFILE "/var/run/auditd.pid"
-
-int audit_warn_allhard(int count);
-int audit_warn_allsoft(void);
-int audit_warn_auditoff(void);
-int audit_warn_closefile(char *filename);
-int audit_warn_ebusy(void);
-int audit_warn_getacdir(char *filename);
-int audit_warn_hard(char *filename);
-int audit_warn_nostart(void);
-int audit_warn_postsigterm(void);
-int audit_warn_soft(char *filename);
-int audit_warn_tmpfile(void);
-
-#endif /* !_AUDITD_H_ */
Copied: vendor/openbsm/1.2_alpha4/bin/auditd/auditd.h (from rev 11163, vendor/openbsm/dist/bin/auditd/auditd.h)
===================================================================
--- vendor/openbsm/1.2_alpha4/bin/auditd/auditd.h (rev 0)
+++ vendor/openbsm/1.2_alpha4/bin/auditd/auditd.h 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,100 @@
+/*-
+ * Copyright (c) 2005-2009 Apple Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of Apple Inc. ("Apple") nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _AUDITD_H_
+#define _AUDITD_H_
+
+#include <sys/types.h>
+#include <sys/queue.h>
+#include <syslog.h>
+
+#define MAX_DIR_SIZE 255
+#define AUDITD_NAME "auditd"
+
+/*
+ * If defined, then the audit daemon will attempt to chown newly created logs
+ * to this group. Otherwise, they will be the default for the user running
+ * auditd, likely the audit group.
+ */
+#define AUDIT_REVIEW_GROUP "audit"
+
+#define HARDLIM_ALL_WARN "allhard"
+#define SOFTLIM_ALL_WARN "allsoft"
+#define AUDITOFF_WARN "auditoff"
+#define CLOSEFILE_WARN "closefile"
+#define EBUSY_WARN "ebusy"
+#define GETACDIR_WARN "getacdir"
+#define HARDLIM_WARN "hard"
+#define NOSTART_WARN "nostart"
+#define POSTSIGTERM_WARN "postsigterm"
+#define SOFTLIM_WARN "soft"
+#define TMPFILE_WARN "tmpfile"
+#define EXPIRED_WARN "expired"
+
+#define AUDITWARN_SCRIPT "/etc/security/audit_warn"
+#define AUDITD_PIDFILE "/var/run/auditd.pid"
+
+#define AUD_STATE_INIT -1
+#define AUD_STATE_DISABLED 0
+#define AUD_STATE_ENABLED 1
+
+int audit_warn_allhard(void);
+int audit_warn_allsoft(void);
+int audit_warn_auditoff(void);
+int audit_warn_closefile(char *filename);
+int audit_warn_ebusy(void);
+int audit_warn_getacdir(char *filename);
+int audit_warn_hard(char *filename);
+int audit_warn_nostart(void);
+int audit_warn_postsigterm(void);
+int audit_warn_soft(char *filename);
+int audit_warn_tmpfile(void);
+int audit_warn_expired(char *filename);
+
+void auditd_openlog(int debug, gid_t gid);
+void auditd_log_err(const char *fmt, ...);
+void auditd_log_debug(const char *fmt, ...);
+void auditd_log_info(const char *fmt, ...);
+void auditd_log_notice(const char *fmt, ...);
+
+void auditd_set_state(int state);
+int auditd_get_state(void);
+
+int auditd_open_trigger(int launchd_flag);
+int auditd_close_trigger(void);
+void auditd_handle_trigger(int trigger);
+
+void auditd_wait_for_events(void);
+void auditd_relay_signal(int signal);
+void auditd_terminate(void);
+int auditd_config_controls(void);
+void auditd_reap_children(void);
+
+
+#endif /* !_AUDITD_H_ */
Copied: vendor/openbsm/1.2_alpha4/bin/auditd/auditd_control.defs (from rev 11163, vendor/openbsm/dist/bin/auditd/auditd_control.defs)
===================================================================
--- vendor/openbsm/1.2_alpha4/bin/auditd/auditd_control.defs (rev 0)
+++ vendor/openbsm/1.2_alpha4/bin/auditd/auditd_control.defs 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,47 @@
+/*-
+ * Copyright (c) 1999-2007 Apple Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of Apple Inc. ("Apple") nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/*
+ * Exported client calls to the auditd facility.
+ */
+
+Subsystem
+ KernelUser
+ auditd_control 456;
+
+#ifndef __MigTypeCheck
+#define __MigTypeCheck 1
+#endif
+
+#include <mach/std_types.defs>
+#include <mach/mach_types.defs>
+
+simpleroutine auditd_control(
+ auditd_port : mach_port_t;
+ in trigger : int);
Copied: vendor/openbsm/1.2_alpha4/bin/auditd/auditd_darwin.c (from rev 11163, vendor/openbsm/dist/bin/auditd/auditd_darwin.c)
===================================================================
--- vendor/openbsm/1.2_alpha4/bin/auditd/auditd_darwin.c (rev 0)
+++ vendor/openbsm/1.2_alpha4/bin/auditd/auditd_darwin.c 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,482 @@
+/*-
+ * Copyright (c) 2004-2009 Apple Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of Apple Inc. ("Apple") nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <sys/types.h>
+
+#include <config/config.h>
+
+#include <errno.h>
+#include <stdarg.h>
+#include <stdlib.h>
+#include <unistd.h>
+
+#include <bsm/audit.h>
+#include <bsm/audit_uevents.h>
+#include <bsm/auditd_lib.h>
+#include <bsm/libbsm.h>
+
+#include <asl.h>
+#include <launch.h>
+#include <notify.h>
+#include <mach/port.h>
+#include <mach/mach_error.h>
+#include <mach/mach_traps.h>
+#include <mach/mach.h>
+#include <mach/host_special_ports.h>
+
+#include "auditd.h"
+
+#include "auditd_controlServer.h"
+#include "audit_triggersServer.h"
+
+/*
+ * Apple System Logger Handles.
+ */
+static aslmsg au_aslmsg = NULL;
+static aslclient au_aslclient = NULL;
+
+static mach_port_t control_port = MACH_PORT_NULL;
+static mach_port_t signal_port = MACH_PORT_NULL;
+static mach_port_t port_set = MACH_PORT_NULL;
+
+/*
+ * Current auditing state (cache).
+ */
+static int auditing_state = AUD_STATE_INIT;
+
+/*
+ * Maximum idle time before auditd terminates under launchd.
+ * If it is zero then auditd does not timeout while idle.
+ */
+static int max_idletime = 0;
+
+#ifndef __BSM_INTERNAL_NOTIFY_KEY
+#define __BSM_INTERNAL_NOTIFY_KEY "com.apple.audit.change"
+#endif /* __BSM_INTERNAL_NOTIFY_KEY */
+
+#ifndef __AUDIT_LAUNCHD_LABEL
+#define __AUDIT_LAUNCHD_LABEL "com.apple.auditd"
+#endif /* __AUDIT_LAUNCHD_LABEL */
+
+#define MAX_MSG_SIZE 4096
+
+/*
+ * Open and set up system logging.
+ */
+void
+auditd_openlog(int debug, gid_t gid)
+{
+ uint32_t opt = 0;
+ char *cp = NULL;
+
+ if (debug)
+ opt = ASL_OPT_STDERR;
+
+ au_aslclient = asl_open("auditd", "com.apple.auditd", opt);
+ au_aslmsg = asl_new(ASL_TYPE_MSG);
+
+#ifdef ASL_KEY_READ_UID
+ /*
+ * Make it only so the audit administrator and members of the audit
+ * review group (if used) have access to the auditd system log messages.
+ */
+ asl_set(au_aslmsg, ASL_KEY_READ_UID, "0");
+ asprintf(&cp, "%u", gid);
+ if (cp != NULL) {
+#ifdef ASL_KEY_READ_GID
+ asl_set(au_aslmsg, ASL_KEY_READ_GID, cp);
+#endif
+ free(cp);
+ }
+#endif
+
+ /*
+ * Set the client-side system log filtering.
+ */
+ if (debug)
+ asl_set_filter(au_aslclient,
+ ASL_FILTER_MASK_UPTO(ASL_LEVEL_DEBUG));
+ else
+ asl_set_filter(au_aslclient,
+ ASL_FILTER_MASK_UPTO(ASL_LEVEL_INFO));
+}
+
+/*
+ * Log messages at different priority levels.
+ */
+void
+auditd_log_err(const char *fmt, ...)
+{
+ va_list ap;
+
+ va_start(ap, fmt);
+ asl_vlog(au_aslclient, au_aslmsg, ASL_LEVEL_ERR, fmt, ap);
+ va_end(ap);
+}
+
+void
+auditd_log_notice(const char *fmt, ...)
+{
+ va_list ap;
+
+ va_start(ap, fmt);
+ asl_vlog(au_aslclient, au_aslmsg, ASL_LEVEL_NOTICE, fmt, ap);
+ va_end(ap);
+}
+
+void
+auditd_log_info(const char *fmt, ...)
+{
+ va_list ap;
+
+ va_start(ap, fmt);
+ asl_vlog(au_aslclient, au_aslmsg, ASL_LEVEL_INFO, fmt, ap);
+ va_end(ap);
+}
+
+void
+auditd_log_debug(const char *fmt, ...)
+{
+ va_list ap;
+
+ va_start(ap, fmt);
+ asl_vlog(au_aslclient, au_aslmsg, ASL_LEVEL_DEBUG, fmt, ap);
+ va_end(ap);
+}
+
+/*
+ * Get the auditing state from the kernel and cache it.
+ */
+static void
+init_audit_state(void)
+{
+ int au_cond;
+
+ if (audit_get_cond(&au_cond) < 0) {
+ if (errno != ENOSYS) {
+ auditd_log_err("Audit status check failed (%s)",
+ strerror(errno));
+ }
+ auditing_state = AUD_STATE_DISABLED;
+ } else
+ if (au_cond == AUC_NOAUDIT || au_cond == AUC_DISABLED)
+ auditing_state = AUD_STATE_DISABLED;
+ else
+ auditing_state = AUD_STATE_ENABLED;
+}
+
+/*
+ * Update the cached auditing state. Let other tasks that may be caching it
+ * as well to update their state via notify(3).
+ */
+void
+auditd_set_state(int state)
+{
+ int old_auditing_state = auditing_state;
+
+ if (state == AUD_STATE_INIT)
+ init_audit_state();
+ else
+ auditing_state = state;
+
+ if (auditing_state != old_auditing_state) {
+ notify_post(__BSM_INTERNAL_NOTIFY_KEY);
+
+ if (auditing_state == AUD_STATE_ENABLED)
+ auditd_log_notice("Auditing enabled");
+ if (auditing_state == AUD_STATE_DISABLED)
+ auditd_log_notice("Auditing disabled");
+ }
+}
+
+/*
+ * Get the cached auditing state.
+ */
+int
+auditd_get_state(void)
+{
+
+ if (auditing_state == AUD_STATE_INIT) {
+ init_audit_state();
+ notify_post(__BSM_INTERNAL_NOTIFY_KEY);
+ }
+
+ return (auditing_state);
+}
+
+/*
+ * Lookup the audit mach port in the launchd dictionary.
+ */
+static mach_port_t
+lookup_machport(const char *label)
+{
+ launch_data_t msg, msd, ld, cdict, to;
+ mach_port_t mp = MACH_PORT_NULL;
+
+ msg = launch_data_new_string(LAUNCH_KEY_CHECKIN);
+
+ cdict = launch_msg(msg);
+ if (cdict == NULL) {
+ auditd_log_err("launch_msg(\"" LAUNCH_KEY_CHECKIN
+ "\") IPC failure: %m");
+ return (MACH_PORT_NULL);
+ }
+
+ if (launch_data_get_type(cdict) == LAUNCH_DATA_ERRNO) {
+ errno = launch_data_get_errno(cdict);
+ auditd_log_err("launch_data_get_type() can't get dict: %m");
+ return (MACH_PORT_NULL);
+ }
+
+ to = launch_data_dict_lookup(cdict, LAUNCH_JOBKEY_TIMEOUT);
+ if (to) {
+ max_idletime = launch_data_get_integer(to);
+ auditd_log_debug("launchd timeout set to %d", max_idletime);
+ } else {
+ auditd_log_debug("launchd timeout not set, setting to 60");
+ max_idletime = 60;
+ }
+
+ msd = launch_data_dict_lookup(cdict, LAUNCH_JOBKEY_MACHSERVICES);
+ if (msd == NULL) {
+ auditd_log_err(
+ "launch_data_dict_lookup() can't get mach services");
+ return (MACH_PORT_NULL);
+ }
+
+ ld = launch_data_dict_lookup(msd, label);
+ if (ld == NULL) {
+ auditd_log_err("launch_data_dict_lookup can't find %s", label);
+ return (MACH_PORT_NULL);
+ }
+
+ mp = launch_data_get_machport(ld);
+
+ return (mp);
+}
+
+static int
+mach_setup(int launchd_flag)
+{
+ mach_msg_type_name_t poly;
+
+ /*
+ * Allocate a port set.
+ */
+ if (mach_port_allocate(mach_task_self(), MACH_PORT_RIGHT_PORT_SET,
+ &port_set) != KERN_SUCCESS) {
+ auditd_log_err("Allocation of port set failed");
+ return (-1);
+ }
+
+
+ /*
+ * Allocate a signal reflection port.
+ */
+ if (mach_port_allocate(mach_task_self(), MACH_PORT_RIGHT_RECEIVE,
+ &signal_port) != KERN_SUCCESS ||
+ mach_port_move_member(mach_task_self(), signal_port, port_set) !=
+ KERN_SUCCESS) {
+ auditd_log_err("Allocation of signal port failed");
+ return (-1);
+ }
+
+ /*
+ * Allocate a trigger port.
+ */
+ if (launchd_flag) {
+ /*
+ * If started under launchd, lookup port in launchd dictionary.
+ */
+ if ((control_port = lookup_machport(__AUDIT_LAUNCHD_LABEL)) ==
+ MACH_PORT_NULL || mach_port_move_member(mach_task_self(),
+ control_port, port_set) != KERN_SUCCESS) {
+ auditd_log_err("Cannot get Mach control port"
+ " via launchd");
+ return (-1);
+ } else
+ auditd_log_debug("Mach control port registered"
+ " via launchd");
+ } else {
+ /*
+ * If not started under launchd, allocate port and register.
+ */
+ if (mach_port_allocate(mach_task_self(),
+ MACH_PORT_RIGHT_RECEIVE, &control_port) != KERN_SUCCESS ||
+ mach_port_move_member(mach_task_self(), control_port,
+ port_set) != KERN_SUCCESS)
+ auditd_log_err("Allocation of trigger port failed");
+
+ /*
+ * Create a send right on our trigger port.
+ */
+ mach_port_extract_right(mach_task_self(), control_port,
+ MACH_MSG_TYPE_MAKE_SEND, &control_port, &poly);
+
+ /*
+ * Register the trigger port with the kernel.
+ */
+ if (host_set_audit_control_port(mach_host_self(),
+ control_port) != KERN_SUCCESS) {
+ auditd_log_err("Cannot set Mach control port");
+ return (-1);
+ } else
+ auditd_log_debug("Mach control port registered");
+ }
+
+ return (0);
+}
+
+/*
+ * Open the trigger messaging mechanism.
+ */
+int
+auditd_open_trigger(int launchd_flag)
+{
+
+ return (mach_setup(launchd_flag));
+}
+
+/*
+ * Close the trigger messaging mechanism.
+ */
+int
+auditd_close_trigger(void)
+{
+
+ return (0);
+}
+
+/*
+ * Combined server handler. Called by the mach message loop when there is
+ * a trigger or signal message.
+ */
+static boolean_t
+auditd_combined_server(mach_msg_header_t *InHeadP, mach_msg_header_t *OutHeadP)
+{
+ mach_port_t local_port = InHeadP->msgh_local_port;
+
+ /* Reset the idle time alarm, if used. */
+ if (max_idletime)
+ alarm(max_idletime);
+
+ if (local_port == signal_port) {
+ int signo = InHeadP->msgh_id;
+
+ switch(signo) {
+ case SIGTERM:
+ case SIGALRM:
+ auditd_terminate();
+ /* Not reached. */
+
+ case SIGCHLD:
+ auditd_reap_children();
+ return (TRUE);
+
+ case SIGHUP:
+ auditd_config_controls();
+ return (TRUE);
+
+ default:
+ auditd_log_info("Received signal %d", signo);
+ return (TRUE);
+ }
+ } else if (local_port == control_port) {
+ boolean_t result;
+
+ result = audit_triggers_server(InHeadP, OutHeadP);
+ if (!result)
+ result = auditd_control_server(InHeadP, OutHeadP);
+ return (result);
+ }
+ auditd_log_info("Recevied msg on bad port 0x%x.", local_port);
+ return (FALSE);
+}
+
+/*
+ * The main event loop. Wait for trigger messages or signals and handle them.
+ * It should not return unless there is a problem.
+ */
+void
+auditd_wait_for_events(void)
+{
+ kern_return_t result;
+
+ /*
+ * Call the mach messaging server loop.
+ */
+ result = mach_msg_server(auditd_combined_server, MAX_MSG_SIZE,
+ port_set, MACH_MSG_OPTION_NONE);
+}
+
+/*
+ * Implementation of the audit_triggers() MIG simpleroutine. Simply a
+ * wrapper function. This handles input from the kernel on the host
+ * special mach port.
+ */
+kern_return_t
+audit_triggers(mach_port_t __unused audit_port, int trigger)
+{
+
+ auditd_handle_trigger(trigger);
+
+ return (KERN_SUCCESS);
+}
+
+/*
+ * Implementation of the auditd_control() MIG simpleroutine. Simply a
+ * wrapper function. This handles input from the audit(1) tool.
+ */
+kern_return_t
+auditd_control(mach_port_t __unused auditd_port, int trigger)
+{
+
+ auditd_handle_trigger(trigger);
+
+ return (KERN_SUCCESS);
+}
+
+/*
+ * When we get a signal, we are often not at a clean point. So, little can
+ * be done in the signal handler itself. Instead, we send a message to the
+ * main servicing loop to do proper handling from a non-signal-handler
+ * context.
+ */
+void
+auditd_relay_signal(int signal)
+{
+ mach_msg_empty_send_t msg;
+
+ msg.header.msgh_id = signal;
+ msg.header.msgh_remote_port = signal_port;
+ msg.header.msgh_local_port = MACH_PORT_NULL;
+ msg.header.msgh_bits = MACH_MSGH_BITS(MACH_MSG_TYPE_MAKE_SEND, 0);
+ mach_msg(&(msg.header), MACH_SEND_MSG|MACH_SEND_TIMEOUT, sizeof(msg),
+ 0, MACH_PORT_NULL, MACH_MSG_TIMEOUT_NONE, MACH_PORT_NULL);
+}
Copied: vendor/openbsm/1.2_alpha4/bin/auditd/auditd_fbsd.c (from rev 11163, vendor/openbsm/dist/bin/auditd/auditd_fbsd.c)
===================================================================
--- vendor/openbsm/1.2_alpha4/bin/auditd/auditd_fbsd.c (rev 0)
+++ vendor/openbsm/1.2_alpha4/bin/auditd/auditd_fbsd.c 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,272 @@
+/*-
+ * Copyright (c) 2004-2009 Apple Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of Apple Inc. ("Apple") nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <sys/types.h>
+
+#include <config/config.h>
+
+#include <errno.h>
+#include <fcntl.h>
+#include <stdarg.h>
+#include <signal.h>
+#include <string.h>
+#include <syslog.h>
+#include <unistd.h>
+
+#include <bsm/audit.h>
+#include <bsm/audit_uevents.h>
+#include <bsm/auditd_lib.h>
+#include <bsm/libbsm.h>
+
+#include "auditd.h"
+
+/*
+ * Current auditing state (cache).
+ */
+static int auditing_state = AUD_STATE_INIT;
+
+/*
+ * Maximum idle time before auditd terminates under launchd.
+ * If it is zero then auditd does not timeout while idle.
+ */
+static int max_idletime = 0;
+
+static int sigchlds, sigchlds_handled;
+static int sighups, sighups_handled;
+static int sigterms, sigterms_handled;
+static int sigalrms, sigalrms_handled;
+
+static int triggerfd = 0;
+
+/*
+ * Open and set up system logging.
+ */
+void
+auditd_openlog(int debug, gid_t __unused gid)
+{
+ int logopts = LOG_CONS | LOG_PID;
+
+ if (debug)
+ logopts |= LOG_PERROR;
+
+#ifdef LOG_SECURITY
+ openlog("auditd", logopts, LOG_SECURITY);
+#else
+ openlog("auditd", logopts, LOG_AUTH);
+#endif
+}
+
+/*
+ * Log messages at different priority levels.
+ */
+void
+auditd_log_err(const char *fmt, ...)
+{
+ va_list ap;
+
+ va_start(ap, fmt);
+ vsyslog(LOG_ERR, fmt, ap);
+ va_end(ap);
+}
+
+void
+auditd_log_notice(const char *fmt, ...)
+{
+ va_list ap;
+
+ va_start(ap, fmt);
+ vsyslog(LOG_NOTICE, fmt, ap);
+ va_end(ap);
+}
+
+void
+auditd_log_info(const char *fmt, ...)
+{
+ va_list ap;
+
+ va_start(ap, fmt);
+ vsyslog(LOG_INFO, fmt, ap);
+ va_end(ap);
+}
+
+void
+auditd_log_debug(const char *fmt, ...)
+{
+ va_list ap;
+
+ va_start(ap, fmt);
+ vsyslog(LOG_DEBUG, fmt, ap);
+ va_end(ap);
+}
+
+/*
+ * Get the auditing state from the kernel and cache it.
+ */
+static void
+init_audit_state(void)
+{
+ int au_cond;
+
+ if (audit_get_cond(&au_cond) < 0) {
+ if (errno != ENOSYS) {
+ auditd_log_err("Audit status check failed (%s)",
+ strerror(errno));
+ }
+ auditing_state = AUD_STATE_DISABLED;
+ } else
+ if (au_cond == AUC_NOAUDIT || au_cond == AUC_DISABLED)
+ auditing_state = AUD_STATE_DISABLED;
+ else
+ auditing_state = AUD_STATE_ENABLED;
+}
+
+/*
+ * Update the cached auditing state.
+ */
+void
+auditd_set_state(int state)
+{
+ int old_auditing_state = auditing_state;
+
+ if (state == AUD_STATE_INIT)
+ init_audit_state();
+ else
+ auditing_state = state;
+
+ if (auditing_state != old_auditing_state) {
+ if (auditing_state == AUD_STATE_ENABLED)
+ auditd_log_notice("Auditing enabled");
+ if (auditing_state == AUD_STATE_DISABLED)
+ auditd_log_notice("Auditing disabled");
+ }
+}
+
+/*
+ * Get the cached auditing state.
+ */
+int
+auditd_get_state(void)
+{
+
+ if (auditing_state == AUD_STATE_INIT)
+ init_audit_state();
+
+ return (auditing_state);
+}
+
+/*
+ * Open the trigger messaging mechanism.
+ */
+int
+auditd_open_trigger(int __unused launchd_flag)
+{
+
+ return ((triggerfd = open(AUDIT_TRIGGER_FILE, O_RDONLY, 0)));
+}
+
+/*
+ * Close the trigger messaging mechanism.
+ */
+int
+auditd_close_trigger(void)
+{
+
+ return (close(triggerfd));
+}
+
+/*
+ * The main event loop. Wait for trigger messages or signals and handle them.
+ * It should not return unless there is a problem.
+ */
+void
+auditd_wait_for_events(void)
+{
+ int num;
+ unsigned int trigger;
+
+ for (;;) {
+ num = read(triggerfd, &trigger, sizeof(trigger));
+ if ((num == -1) && (errno != EINTR)) {
+ auditd_log_err("%s: error %d", __FUNCTION__, errno);
+ return;
+ }
+
+ /* Reset the idle time alarm, if used. */
+ if (max_idletime)
+ alarm(max_idletime);
+
+ if (sigterms != sigterms_handled) {
+ auditd_log_debug("%s: SIGTERM", __FUNCTION__);
+ auditd_terminate();
+ /* not reached */
+ }
+ if (sigalrms != sigalrms_handled) {
+ auditd_log_debug("%s: SIGALRM", __FUNCTION__);
+ auditd_terminate();
+ /* not reached */
+ }
+ if (sigchlds != sigchlds_handled) {
+ sigchlds_handled = sigchlds;
+ auditd_reap_children();
+ }
+ if (sighups != sighups_handled) {
+ auditd_log_debug("%s: SIGHUP", __FUNCTION__);
+ sighups_handled = sighups;
+ auditd_config_controls();
+ }
+
+ if ((num == -1) && (errno == EINTR))
+ continue;
+ if (num == 0) {
+ auditd_log_err("%s: read EOF", __FUNCTION__);
+ return;
+ }
+ auditd_handle_trigger(trigger);
+ }
+}
+
+/*
+ * When we get a signal, we are often not at a clean point. So, little can
+ * be done in the signal handler itself. Instead, we send a message to the
+ * main servicing loop to do proper handling from a non-signal-handler
+ * context.
+ */
+void
+auditd_relay_signal(int signal)
+{
+ if (signal == SIGHUP)
+ sighups++;
+ if (signal == SIGTERM)
+ sigterms++;
+ if (signal == SIGCHLD)
+ sigchlds++;
+ if (signal == SIGALRM)
+ sigalrms++;
+}
+
Deleted: vendor/openbsm/1.2_alpha4/bin/auditfilterd/Makefile.am
===================================================================
--- vendor/openbsm/dist/bin/auditfilterd/Makefile.am 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/bin/auditfilterd/Makefile.am 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,10 +0,0 @@
-#
-# $P4: //depot/projects/trustedbsd/openbsm/bin/auditfilterd/Makefile.am#1 $
-#
-
-INCLUDES = -I$(top_srcdir)
-
-sbin_PROGRAMS = auditfilterd
-auditfilterd_SOURCES = auditfilterd_conf.c auditfilterd.c
-auditfilterd_LDADD = $(top_builddir)/libbsm/libbsm.la
-man8_MANS = auditfilterd.8
Copied: vendor/openbsm/1.2_alpha4/bin/auditfilterd/Makefile.am (from rev 11163, vendor/openbsm/dist/bin/auditfilterd/Makefile.am)
===================================================================
--- vendor/openbsm/1.2_alpha4/bin/auditfilterd/Makefile.am (rev 0)
+++ vendor/openbsm/1.2_alpha4/bin/auditfilterd/Makefile.am 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,10 @@
+if USE_NATIVE_INCLUDES
+INCLUDES = -I$(top_builddir) -I$(top_srcdir)
+else
+INCLUDES = -I$(top_builddir) -I$(top_srcdir) -I$(top_srcdir)/sys
+endif
+
+sbin_PROGRAMS = auditfilterd
+auditfilterd_SOURCES = auditfilterd_conf.c auditfilterd.c
+auditfilterd_LDADD = $(top_builddir)/libbsm/libbsm.la
+man8_MANS = auditfilterd.8
Deleted: vendor/openbsm/1.2_alpha4/bin/auditfilterd/Makefile.in
===================================================================
--- vendor/openbsm/dist/bin/auditfilterd/Makefile.in 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/bin/auditfilterd/Makefile.in 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,518 +0,0 @@
-# Makefile.in generated by automake 1.10 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
- at SET_MAKE@
-
-#
-# $P4: //depot/projects/trustedbsd/openbsm/bin/auditfilterd/Makefile.in#2 $
-#
-
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-sbin_PROGRAMS = auditfilterd$(EXEEXT)
-subdir = bin/auditfilterd
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/config/config.h
-CONFIG_CLEAN_FILES =
-am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"
-sbinPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
-PROGRAMS = $(sbin_PROGRAMS)
-am_auditfilterd_OBJECTS = auditfilterd_conf.$(OBJEXT) \
- auditfilterd.$(OBJEXT)
-auditfilterd_OBJECTS = $(am_auditfilterd_OBJECTS)
-auditfilterd_DEPENDENCIES = $(top_builddir)/libbsm/libbsm.la
-DEFAULT_INCLUDES = -I. -I$(top_builddir)/config at am__isrc@
-depcomp = $(SHELL) $(top_srcdir)/config/depcomp
-am__depfiles_maybe = depfiles
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
- $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
- --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
- $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
- --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
- $(LDFLAGS) -o $@
-SOURCES = $(auditfilterd_SOURCES)
-DIST_SOURCES = $(auditfilterd_SOURCES)
-man8dir = $(mandir)/man8
-NROFF = nroff
-MANS = $(man8_MANS)
-ETAGS = etags
-CTAGS = ctags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AMTAR = @AMTAR@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO = @ECHO@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-F77 = @F77@
-FFLAGS = @FFLAGS@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-VERSION = @VERSION@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-INCLUDES = -I$(top_srcdir)
-auditfilterd_SOURCES = auditfilterd_conf.c auditfilterd.c
-auditfilterd_LDADD = $(top_builddir)/libbsm/libbsm.la
-man8_MANS = auditfilterd.8
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .c .lo .o .obj
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
- && exit 0; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign bin/auditfilterd/Makefile'; \
- cd $(top_srcdir) && \
- $(AUTOMAKE) --foreign bin/auditfilterd/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-install-sbinPROGRAMS: $(sbin_PROGRAMS)
- @$(NORMAL_INSTALL)
- test -z "$(sbindir)" || $(MKDIR_P) "$(DESTDIR)$(sbindir)"
- @list='$(sbin_PROGRAMS)'; for p in $$list; do \
- p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
- if test -f $$p \
- || test -f $$p1 \
- ; then \
- f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
- echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(sbinPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(sbindir)/$$f'"; \
- $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(sbinPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(sbindir)/$$f" || exit 1; \
- else :; fi; \
- done
-
-uninstall-sbinPROGRAMS:
- @$(NORMAL_UNINSTALL)
- @list='$(sbin_PROGRAMS)'; for p in $$list; do \
- f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
- echo " rm -f '$(DESTDIR)$(sbindir)/$$f'"; \
- rm -f "$(DESTDIR)$(sbindir)/$$f"; \
- done
-
-clean-sbinPROGRAMS:
- @list='$(sbin_PROGRAMS)'; for p in $$list; do \
- f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
- echo " rm -f $$p $$f"; \
- rm -f $$p $$f ; \
- done
-auditfilterd$(EXEEXT): $(auditfilterd_OBJECTS) $(auditfilterd_DEPENDENCIES)
- @rm -f auditfilterd$(EXEEXT)
- $(LINK) $(auditfilterd_OBJECTS) $(auditfilterd_LDADD) $(LIBS)
-
-mostlyclean-compile:
- -rm -f *.$(OBJEXT)
-
-distclean-compile:
- -rm -f *.tab.c
-
- at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/auditfilterd.Po at am__quote@
- at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/auditfilterd_conf.Po at am__quote@
-
-.c.o:
- at am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
- at am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
- at AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
- at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
- at am__fastdepCC_FALSE@ $(COMPILE) -c $<
-
-.c.obj:
- at am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
- at am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
- at AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
- at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
- at am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
-
-.c.lo:
- at am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
- at am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
- at AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
- at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
- at am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $<
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-install-man8: $(man8_MANS) $(man_MANS)
- @$(NORMAL_INSTALL)
- test -z "$(man8dir)" || $(MKDIR_P) "$(DESTDIR)$(man8dir)"
- @list='$(man8_MANS) $(dist_man8_MANS) $(nodist_man8_MANS)'; \
- l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
- for i in $$l2; do \
- case "$$i" in \
- *.8*) list="$$list $$i" ;; \
- esac; \
- done; \
- for i in $$list; do \
- if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
- else file=$$i; fi; \
- ext=`echo $$i | sed -e 's/^.*\\.//'`; \
- case "$$ext" in \
- 8*) ;; \
- *) ext='8' ;; \
- esac; \
- inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
- inst=`echo $$inst | sed -e 's/^.*\///'`; \
- inst=`echo $$inst | sed '$(transform)'`.$$ext; \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst"; \
- done
-uninstall-man8:
- @$(NORMAL_UNINSTALL)
- @list='$(man8_MANS) $(dist_man8_MANS) $(nodist_man8_MANS)'; \
- l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
- for i in $$l2; do \
- case "$$i" in \
- *.8*) list="$$list $$i" ;; \
- esac; \
- done; \
- for i in $$list; do \
- ext=`echo $$i | sed -e 's/^.*\\.//'`; \
- case "$$ext" in \
- 8*) ;; \
- *) ext='8' ;; \
- esac; \
- inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
- inst=`echo $$inst | sed -e 's/^.*\///'`; \
- inst=`echo $$inst | sed '$(transform)'`.$$ext; \
- echo " rm -f '$(DESTDIR)$(man8dir)/$$inst'"; \
- rm -f "$(DESTDIR)$(man8dir)/$$inst"; \
- done
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- mkid -fID $$unique
-tags: TAGS
-
-TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
- test -n "$$unique" || unique=$$empty_fix; \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$tags $$unique; \
- fi
-ctags: CTAGS
-CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(CTAGS_ARGS)$$tags$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$tags $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && cd $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) $$here
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
- fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
- else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(PROGRAMS) $(MANS)
-installdirs:
- for dir in "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic clean-libtool clean-sbinPROGRAMS \
- mostlyclean-am
-
-distclean: distclean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
- distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-info: info-am
-
-info-am:
-
-install-data-am: install-man
-
-install-dvi: install-dvi-am
-
-install-exec-am: install-sbinPROGRAMS
-
-install-html: install-html-am
-
-install-info: install-info-am
-
-install-man: install-man8
-
-install-pdf: install-pdf-am
-
-install-ps: install-ps-am
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic \
- mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-man uninstall-sbinPROGRAMS
-
-uninstall-man: uninstall-man8
-
-.MAKE: install-am install-strip
-
-.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
- clean-libtool clean-sbinPROGRAMS ctags distclean \
- distclean-compile distclean-generic distclean-libtool \
- distclean-tags distdir dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-man8 install-pdf install-pdf-am install-ps \
- install-ps-am install-sbinPROGRAMS install-strip installcheck \
- installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-compile \
- mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
- tags uninstall uninstall-am uninstall-man uninstall-man8 \
- uninstall-sbinPROGRAMS
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
Copied: vendor/openbsm/1.2_alpha4/bin/auditfilterd/Makefile.in (from rev 11163, vendor/openbsm/dist/bin/auditfilterd/Makefile.in)
===================================================================
--- vendor/openbsm/1.2_alpha4/bin/auditfilterd/Makefile.in (rev 0)
+++ vendor/openbsm/1.2_alpha4/bin/auditfilterd/Makefile.in 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,649 @@
+# Makefile.in generated by automake 1.12.2 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2012 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+ at SET_MAKE@
+
+VPATH = @srcdir@
+am__make_dryrun = \
+ { \
+ am__dry=no; \
+ case $$MAKEFLAGS in \
+ *\\[\ \ ]*) \
+ echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
+ | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+ *) \
+ for am__flg in $$MAKEFLAGS; do \
+ case $$am__flg in \
+ *=*|--*) ;; \
+ *n*) am__dry=yes; break;; \
+ esac; \
+ done;; \
+ esac; \
+ test $$am__dry = yes; \
+ }
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+sbin_PROGRAMS = auditfilterd$(EXEEXT)
+subdir = bin/auditfilterd
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
+ $(top_srcdir)/config/depcomp
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"
+PROGRAMS = $(sbin_PROGRAMS)
+am_auditfilterd_OBJECTS = auditfilterd_conf.$(OBJEXT) \
+ auditfilterd.$(OBJEXT)
+auditfilterd_OBJECTS = $(am_auditfilterd_OBJECTS)
+auditfilterd_DEPENDENCIES = $(top_builddir)/libbsm/libbsm.la
+DEFAULT_INCLUDES = -I. at am__isrc@ -I$(top_builddir)/config
+depcomp = $(SHELL) $(top_srcdir)/config/depcomp
+am__depfiles_maybe = depfiles
+am__mv = mv -f
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+ --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+ --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
+ $(LDFLAGS) -o $@
+SOURCES = $(auditfilterd_SOURCES)
+DIST_SOURCES = $(auditfilterd_SOURCES)
+am__can_run_installinfo = \
+ case $$AM_UPDATE_INFO_DIR in \
+ n|no|NO) false;; \
+ *) (install-info --version) >/dev/null 2>&1;; \
+ esac
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+ *) f=$$p;; \
+ esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+ if (++n[$$2] == $(am__install_max)) \
+ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+ END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+ test -z "$$files" \
+ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+ $(am__cd) "$$dir" && rm -f $$files; }; \
+ }
+man8dir = $(mandir)/man8
+NROFF = nroff
+MANS = $(man8_MANS)
+ETAGS = etags
+CTAGS = ctags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LEX = @LEX@
+LEXLIB = @LEXLIB@
+LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MIG = @MIG@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+VERSION = @VERSION@
+YACC = @YACC@
+YFLAGS = @YFLAGS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+ at USE_NATIVE_INCLUDES_FALSE@INCLUDES = -I$(top_builddir) -I$(top_srcdir) -I$(top_srcdir)/sys
+ at USE_NATIVE_INCLUDES_TRUE@INCLUDES = -I$(top_builddir) -I$(top_srcdir)
+auditfilterd_SOURCES = auditfilterd_conf.c auditfilterd.c
+auditfilterd_LDADD = $(top_builddir)/libbsm/libbsm.la
+man8_MANS = auditfilterd.8
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .lo .o .obj
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+ && { if test -f $@; then exit 0; else break; fi; }; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign bin/auditfilterd/Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --foreign bin/auditfilterd/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+install-sbinPROGRAMS: $(sbin_PROGRAMS)
+ @$(NORMAL_INSTALL)
+ @list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \
+ if test -n "$$list"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
+ fi; \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed 's/$(EXEEXT)$$//' | \
+ while read p p1; do if test -f $$p || test -f $$p1; \
+ then echo "$$p"; echo "$$p"; else :; fi; \
+ done | \
+ sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
+ -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+ sed 'N;N;N;s,\n, ,g' | \
+ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+ if ($$2 == $$4) files[d] = files[d] " " $$1; \
+ else { print "f", $$3 "/" $$4, $$1; } } \
+ END { for (d in files) print "f", d, files[d] }' | \
+ while read type dir files; do \
+ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+ test -z "$$files" || { \
+ echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
+ $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
+ } \
+ ; done
+
+uninstall-sbinPROGRAMS:
+ @$(NORMAL_UNINSTALL)
+ @list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \
+ files=`for p in $$list; do echo "$$p"; done | \
+ sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+ -e 's/$$/$(EXEEXT)/' `; \
+ test -n "$$list" || exit 0; \
+ echo " ( cd '$(DESTDIR)$(sbindir)' && rm -f" $$files ")"; \
+ cd "$(DESTDIR)$(sbindir)" && rm -f $$files
+
+clean-sbinPROGRAMS:
+ @list='$(sbin_PROGRAMS)'; test -n "$$list" || exit 0; \
+ echo " rm -f" $$list; \
+ rm -f $$list || exit $$?; \
+ test -n "$(EXEEXT)" || exit 0; \
+ list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+ echo " rm -f" $$list; \
+ rm -f $$list
+auditfilterd$(EXEEXT): $(auditfilterd_OBJECTS) $(auditfilterd_DEPENDENCIES) $(EXTRA_auditfilterd_DEPENDENCIES)
+ @rm -f auditfilterd$(EXEEXT)
+ $(LINK) $(auditfilterd_OBJECTS) $(auditfilterd_LDADD) $(LIBS)
+
+mostlyclean-compile:
+ -rm -f *.$(OBJEXT)
+
+distclean-compile:
+ -rm -f *.tab.c
+
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/auditfilterd.Po at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/auditfilterd_conf.Po at am__quote@
+
+.c.o:
+ at am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+ at am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ at am__fastdepCC_FALSE@ $(COMPILE) -c $<
+
+.c.obj:
+ at am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+ at am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ at am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
+
+.c.lo:
+ at am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+ at am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ at am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $<
+
+mostlyclean-libtool:
+ -rm -f *.lo
+
+clean-libtool:
+ -rm -rf .libs _libs
+install-man8: $(man8_MANS)
+ @$(NORMAL_INSTALL)
+ @list1='$(man8_MANS)'; \
+ list2=''; \
+ test -n "$(man8dir)" \
+ && test -n "`echo $$list1$$list2`" \
+ || exit 0; \
+ echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
+ { for i in $$list1; do echo "$$i"; done; \
+ if test -n "$$list2"; then \
+ for i in $$list2; do echo "$$i"; done \
+ | sed -n '/\.8[a-z]*$$/p'; \
+ fi; \
+ } | while read p; do \
+ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; echo "$$p"; \
+ done | \
+ sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+ sed 'N;N;s,\n, ,g' | { \
+ list=; while read file base inst; do \
+ if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
+ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
+ fi; \
+ done; \
+ for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+ while read files; do \
+ test -z "$$files" || { \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
+ done; }
+
+uninstall-man8:
+ @$(NORMAL_UNINSTALL)
+ @list='$(man8_MANS)'; test -n "$(man8dir)" || exit 0; \
+ files=`{ for i in $$list; do echo "$$i"; done; \
+ } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+ dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ set x; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ shift; \
+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ if test $$# -gt 0; then \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ "$$@" $$unique; \
+ else \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$unique; \
+ fi; \
+ fi
+ctags: CTAGS
+CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ test -z "$(CTAGS_ARGS)$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && $(am__cd) $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) "$$here"
+
+cscopelist: $(HEADERS) $(SOURCES) $(LISP)
+ list='$(SOURCES) $(HEADERS) $(LISP)'; \
+ case "$(srcdir)" in \
+ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+ *) sdir=$(subdir)/$(srcdir) ;; \
+ esac; \
+ for i in $$list; do \
+ if test -f "$$i"; then \
+ echo "$(subdir)/$$i"; \
+ else \
+ echo "$$sdir/$$i"; \
+ fi; \
+ done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+ @list='$(MANS)'; if test -n "$$list"; then \
+ list=`for p in $$list; do \
+ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+ if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
+ if test -n "$$list" && \
+ grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
+ echo "error: found man pages containing the 'missing help2man' replacement text:" >&2; \
+ grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \
+ echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \
+ echo " typically 'make maintainer-clean' will remove them" >&2; \
+ exit 1; \
+ else :; fi; \
+ else :; fi
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+ else \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+check: check-am
+all-am: Makefile $(PROGRAMS) $(MANS)
+installdirs:
+ for dir in "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"; do \
+ test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+ done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+ if test -z '$(STRIP)'; then \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ install; \
+ else \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+ fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libtool clean-sbinPROGRAMS \
+ mostlyclean-am
+
+distclean: distclean-am
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+ distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-man
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am: install-sbinPROGRAMS
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man: install-man8
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+ mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-man uninstall-sbinPROGRAMS
+
+uninstall-man: uninstall-man8
+
+.MAKE: install-am install-strip
+
+.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
+ clean-libtool clean-sbinPROGRAMS cscopelist ctags distclean \
+ distclean-compile distclean-generic distclean-libtool \
+ distclean-tags distdir dvi dvi-am html html-am info info-am \
+ install install-am install-data install-data-am install-dvi \
+ install-dvi-am install-exec install-exec-am install-html \
+ install-html-am install-info install-info-am install-man \
+ install-man8 install-pdf install-pdf-am install-ps \
+ install-ps-am install-sbinPROGRAMS install-strip installcheck \
+ installcheck-am installdirs maintainer-clean \
+ maintainer-clean-generic mostlyclean mostlyclean-compile \
+ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+ tags uninstall uninstall-am uninstall-man uninstall-man8 \
+ uninstall-sbinPROGRAMS
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
Deleted: vendor/openbsm/1.2_alpha4/bin/auditfilterd/auditfilterd.8
===================================================================
--- vendor/openbsm/dist/bin/auditfilterd/auditfilterd.8 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/bin/auditfilterd/auditfilterd.8 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,84 +0,0 @@
-.\"-
-.\" Copyright (c) 2006 Robert N. M. Watson
-.\" All rights reserved.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\" notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\" notice, this list of conditions and the following disclaimer in the
-.\" documentation and/or other materials provided with the distribution.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
-.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-.\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
-.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-.\" SUCH DAMAGE.
-.\"
-.\" $P4: //depot/projects/trustedbsd/openbsm/bin/auditfilterd/auditfilterd.8#4 $
-.\"
-.Dd October 3, 2006
-.Dt AUDITFILTERD 8
-.Os
-.Sh NAME
-.Nm auditfilterd
-.Nd audit filter daemon
-.Sh SYNOPSIS
-.Nm
-.Op Fl d
-.Op Fl c Ar conffile
-.Op Fl p Ar pipefile
-.Op Fl t Ar trailfile
-.Sh DESCRIPTION
-The
-.Nm
-daemon is an extensible audit event monitoring daemon, allowing pluggable
-modules to track audit events from a live audit source.
-It is configured using the
-.Xr audit_filter 5
-configuration file.
-The source can either be a pipe or a file.
-.Pp
-The options are as follows:
-.Bl -tag -width indent
-.It Fl c Ar conffile
-Specify an alternative configuration file.
-.It Fl d
-Starts the daemon in debug mode \[em] it will not daemonize.
-.It Fl p Ar pipefile
-Specify a pipe as an alternative source of audit event records.
-Default is
-.Pa /dev/auditpipe .
-.It Fl t Ar trailfile
-Specify a file as an alternative source of audit event records.
-.El
-.Sh FILES
-.Bl -tag -width ".Pa /etc/security/audit_filterd" -compact
-.It Pa /etc/security/audit_filterd
-Default configuration file for
-.Nm .
-.It Pa /dev/auditpipe
-Default audit record source for
-.Nm .
-.El
-.Sh SEE ALSO
-.Xr audit 8 ,
-.Xr auditd 8
-.Sh HISTORY
-The OpenBSM implementation was created by McAfee Research, the security
-division of McAfee Inc., under contract to Apple Computer Inc.\& in 2004.
-It was subsequently adopted by the TrustedBSD Project as the foundation for
-the OpenBSM distribution.
-.Sh AUTHORS
-The
-.Nm
-daemon and audit filter APIs were created by
-.An Robert Watson .
Copied: vendor/openbsm/1.2_alpha4/bin/auditfilterd/auditfilterd.8 (from rev 11163, vendor/openbsm/dist/bin/auditfilterd/auditfilterd.8)
===================================================================
--- vendor/openbsm/1.2_alpha4/bin/auditfilterd/auditfilterd.8 (rev 0)
+++ vendor/openbsm/1.2_alpha4/bin/auditfilterd/auditfilterd.8 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,84 @@
+.\"-
+.\" Copyright (c) 2006 Robert N. M. Watson
+.\" All rights reserved.
+.\"
+.\" Redistribution and use in source and binary forms, with or without
+.\" modification, are permitted provided that the following conditions
+.\" are met:
+.\" 1. Redistributions of source code must retain the above copyright
+.\" notice, this list of conditions and the following disclaimer.
+.\" 2. Redistributions in binary form must reproduce the above copyright
+.\" notice, this list of conditions and the following disclaimer in the
+.\" documentation and/or other materials provided with the distribution.
+.\"
+.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+.\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+.\" SUCH DAMAGE.
+.\"
+.Dd October 3, 2006
+.Dt AUDITFILTERD 8
+.Os
+.Sh NAME
+.Nm auditfilterd
+.Nd audit filter daemon
+.Sh SYNOPSIS
+.Nm
+.Op Fl d
+.Op Fl c Ar conffile
+.Op Fl p Ar pipefile
+.Op Fl t Ar trailfile
+.Sh DESCRIPTION
+The
+.Nm
+daemon is an extensible audit event monitoring daemon, allowing pluggable
+modules to track audit events from a live audit source.
+It is configured using the audit_filter configuration file.
+The source can either be a pipe or a file.
+.Pp
+The options are as follows:
+.Bl -tag -width indent
+.It Fl c Ar conffile
+Specify an alternative configuration file.
+.It Fl d
+Starts the daemon in debug mode \[em] it will not daemonize.
+.It Fl p Ar pipefile
+Specify a pipe as an alternative source of audit event records.
+Default is
+.Pa /dev/auditpipe .
+.It Fl t Ar trailfile
+Specify a file as an alternative source of audit event records.
+.El
+.Sh FILES
+.Bl -tag -width ".Pa /etc/security/audit_filterd" -compact
+.It Pa /etc/security/audit_filterd
+Default configuration file for
+.Nm .
+.It Pa /dev/auditpipe
+Default audit record source for
+.Nm .
+.El
+.Sh SEE ALSO
+.Xr audit 8 ,
+.Xr auditd 8
+.Sh HISTORY
+The OpenBSM implementation was created by McAfee Research, the security
+division of McAfee Inc., under contract to Apple Computer Inc.\& in 2004.
+It was subsequently adopted by the TrustedBSD Project as the foundation for
+the OpenBSM distribution.
+.Sh AUTHORS
+The
+.Nm
+daemon and audit filter APIs were created by
+.An Robert Watson .
+.Sh BUGS
+.Nm
+is experimental, and should not be relied on in production.
+APIs and services it offers can and will change in future OpenBSM releases.
Deleted: vendor/openbsm/1.2_alpha4/bin/auditfilterd/auditfilterd.c
===================================================================
--- vendor/openbsm/dist/bin/auditfilterd/auditfilterd.c 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/bin/auditfilterd/auditfilterd.c 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,353 +0,0 @@
-/*-
- * Copyright (c) 2006 Robert N. M. Watson
- * All rights reserved.
- *
- * This software was developed by Robert Watson for the TrustedBSD Project.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * $P4: //depot/projects/trustedbsd/openbsm/bin/auditfilterd/auditfilterd.c#11 $
- */
-
-/*
- * Main file for the audit filter daemon, which presents audit records to a
- * set of run-time registered loadable modules. This is the main event loop
- * of the daemon, which handles starting up, waiting for records, and
- * presenting records to configured modules. auditfilterd_conf.c handles the
- * reading and management of the configuration, module list and module state,
- * etc.
- */
-
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <sys/time.h>
-
-#include <config/config.h>
-#ifdef HAVE_FULL_QUEUE_H
-#include <sys/queue.h>
-#else
-#include <compat/queue.h>
-#endif
-
-#ifndef HAVE_CLOCK_GETTIME
-#include <compat/clock_gettime.h>
-#endif
-
-#include <bsm/libbsm.h>
-#include <bsm/audit_filter.h>
-
-#include <err.h>
-#include <fcntl.h>
-#include <signal.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <unistd.h>
-
-#include "auditfilterd.h"
-
-/*
- * Global list of registered filters.
- */
-struct auditfilter_module_list filter_list;
-
-/*
- * Configuration and signal->main flags.
- */
-int debug; /* Debugging mode requested, don't detach. */
-int reread_config; /* SIGHUP has been received. */
-int quit; /* SIGQUIT/TERM/INT has been received. */
-
-static void
-usage(void)
-{
-
- fprintf(stderr, "auditfilterd [-d] [-c conffile] [-p pipefile]"
- " [-t trailfile]\n");
- fprintf(stderr, " -c Specify configuration file (default: %s)\n",
- AUDITFILTERD_CONFFILE);
- fprintf(stderr, " -d Debugging mode, don't daemonize\n");
- fprintf(stderr, " -p Specify pipe file (default: %s)\n",
- AUDITFILTERD_PIPEFILE);
- fprintf(stderr, " -t Specify audit trail file (default: none)\n");
- exit(-1);
-}
-
-static void
-auditfilterd_init(void)
-{
-
- TAILQ_INIT(&filter_list);
-}
-
-static void
-signal_handler(int signum)
-{
-
- switch (signum) {
- case SIGHUP:
- reread_config++;
- break;
-
- case SIGINT:
- case SIGTERM:
- case SIGQUIT:
- quit++;
- break;
- }
-}
-
-/*
- * Present raw BSM to a set of registered and interested filters.
- */
-static void
-present_rawrecord(struct timespec *ts, u_char *data, u_int len)
-{
- struct auditfilter_module *am;
-
- TAILQ_FOREACH(am, &filter_list, am_list) {
- if (am->am_rawrecord != NULL)
- (am->am_rawrecord)(am, ts, data, len);
- }
-}
-
-/*
- * Parse the BSM into a set of tokens, which will be pased to registered
- * and interested filters.
- */
-#define MAX_TOKENS 128 /* Maximum tokens we handle per record. */
-static void
-present_tokens(struct timespec *ts, u_char *data, u_int len)
-{
- struct auditfilter_module *am;
- tokenstr_t tokens[MAX_TOKENS];
- u_int bytesread;
- int tokencount;
-
- tokencount = 0;
- while (bytesread < len) {
- if (au_fetch_tok(&tokens[tokencount], data + bytesread,
- len - bytesread) == -1)
- break;
- bytesread += tokens[tokencount].len;
- tokencount++;
- }
-
- TAILQ_FOREACH(am, &filter_list, am_list) {
- if (am->am_record != NULL)
- (am->am_record)(am, ts, tokencount, tokens);
- }
-}
-
-/*
- * The main loop spins pulling records out of the record source and passing
- * them to modules for processing.
- */
-static void
-mainloop_file(const char *conffile, const char *trailfile, FILE *trail_fp)
-{
- struct timespec ts;
- FILE *conf_fp;
- u_char *buf;
- int reclen;
-
- while (1) {
- /*
- * On SIGHUP, we reread the configuration file and reopen
- * the trail file.
- */
- if (reread_config) {
- reread_config = 0;
- warnx("rereading configuration");
- conf_fp = fopen(conffile, "r");
- if (conf_fp == NULL)
- err(-1, "%s", conffile);
- auditfilterd_conf(conffile, conf_fp);
- fclose(conf_fp);
-
- fclose(trail_fp);
- trail_fp = fopen(trailfile, "r");
- if (trail_fp == NULL)
- err(-1, "%s", trailfile);
- }
- if (quit) {
- warnx("quitting");
- break;
- }
-
- /*
- * For now, be relatively unrobust about incomplete records,
- * but in the future will want to do better. Need to look
- * more at the right blocking and signal behavior here.
- */
- reclen = au_read_rec(trail_fp, &buf);
- if (reclen == -1)
- continue;
- if (clock_gettime(CLOCK_REALTIME, &ts) < 0)
- err(-1, "clock_gettime");
- present_rawrecord(&ts, buf, reclen);
- present_tokens(&ts, buf, reclen);
- free(buf);
- }
-}
-
-/*
- * The main loop spins pulling records out of the record source and passing
- * them to modules for processing. This version of the function accepts
- * discrete record input from a file descriptor, as opposed to buffered input
- * from a file stream.
- */
-static void
-mainloop_pipe(const char *conffile, const char *pipefile, int pipe_fd)
-{
- u_char record[MAX_AUDIT_RECORD_SIZE];
- struct timespec ts;
- FILE *conf_fp;
- int reclen;
-
- while (1) {
- /*
- * On SIGHUP, we reread the configuration file. Unlike with
- * a trail file, we don't reopen the pipe, as we don't want
- * to miss records which will be flushed if we do.
- */
- if (reread_config) {
- reread_config = 0;
- warnx("rereading configuration");
- conf_fp = fopen(conffile, "r");
- if (conf_fp == NULL)
- err(-1, "%s", conffile);
- auditfilterd_conf(conffile, conf_fp);
- fclose(conf_fp);
- }
- if (quit) {
- warnx("quitting");
- break;
- }
-
- /*
- * For now, be relatively unrobust about incomplete records,
- * but in the future will want to do better. Need to look
- * more at the right blocking and signal behavior here.
- */
- reclen = read(pipe_fd, record, MAX_AUDIT_RECORD_SIZE);
- if (reclen < 0)
- continue;
- if (clock_gettime(CLOCK_REALTIME, &ts) < 0)
- err(-1, "clock_gettime");
- present_rawrecord(&ts, record, reclen);
- present_tokens(&ts, record, reclen);
- }
-}
-
-int
-main(int argc, char *argv[])
-{
- const char *pipefile, *trailfile, *conffile;
- FILE *trail_fp, *conf_fp;
- struct stat sb;
- int pipe_fd;
- int ch;
-
- conffile = AUDITFILTERD_CONFFILE;
- trailfile = NULL;
- pipefile = NULL;
- while ((ch = getopt(argc, argv, "c:dp:t:")) != -1) {
- switch (ch) {
- case 'c':
- conffile = optarg;
- break;
-
- case 'd':
- debug++;
- break;
-
- case 't':
- if (trailfile != NULL || pipefile != NULL)
- usage();
- trailfile = optarg;
- break;
-
- case 'p':
- if (pipefile != NULL || trailfile != NULL)
- usage();
- pipefile = optarg;
- break;
-
- default:
- usage();
- }
- }
-
- argc -= optind;
- argv += optind;
-
- if (argc != 0)
- usage();
-
- /*
- * We allow only one of a pipe or a trail to be used. If none is
- * specified, we provide a default pipe path.
- */
- if (pipefile == NULL && trailfile == NULL)
- pipefile = AUDITFILTERD_PIPEFILE;
-
- if (pipefile != NULL) {
- pipe_fd = open(pipefile, O_RDONLY);
- if (pipe_fd < 0)
- err(-1, "open:%s", pipefile);
- if (fstat(pipe_fd, &sb) < 0)
- err(-1, "stat: %s", pipefile);
- if (!S_ISCHR(sb.st_mode))
- errx(-1, "fstat: %s not device", pipefile);
- } else {
- trail_fp = fopen(trailfile, "r");
- if (trail_fp == NULL)
- err(-1, "%s", trailfile);
- }
-
- conf_fp = fopen(conffile, "r");
- if (conf_fp == NULL)
- err(-1, "%s", conffile);
-
- auditfilterd_init();
- if (auditfilterd_conf(conffile, conf_fp) < 0)
- exit(-1);
- fclose(conf_fp);
-
- if (!debug) {
- if (daemon(0, 0) < 0)
- err(-1, "daemon");
- }
-
- signal(SIGHUP, signal_handler);
- signal(SIGINT, signal_handler);
- signal(SIGQUIT, signal_handler);
- signal(SIGTERM, signal_handler);
-
- if (pipefile != NULL)
- mainloop_pipe(conffile, pipefile, pipe_fd);
- else
- mainloop_file(conffile, trailfile, trail_fp);
-
- auditfilterd_conf_shutdown();
- return (0);
-}
Copied: vendor/openbsm/1.2_alpha4/bin/auditfilterd/auditfilterd.c (from rev 11163, vendor/openbsm/dist/bin/auditfilterd/auditfilterd.c)
===================================================================
--- vendor/openbsm/1.2_alpha4/bin/auditfilterd/auditfilterd.c (rev 0)
+++ vendor/openbsm/1.2_alpha4/bin/auditfilterd/auditfilterd.c 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,352 @@
+/*-
+ * Copyright (c) 2006 Robert N. M. Watson
+ * All rights reserved.
+ *
+ * This software was developed by Robert Watson for the TrustedBSD Project.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+/*
+ * Main file for the audit filter daemon, which presents audit records to a
+ * set of run-time registered loadable modules. This is the main event loop
+ * of the daemon, which handles starting up, waiting for records, and
+ * presenting records to configured modules. auditfilterd_conf.c handles the
+ * reading and management of the configuration, module list and module state,
+ * etc.
+ */
+
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <sys/time.h>
+
+#include <config/config.h>
+#ifdef HAVE_FULL_QUEUE_H
+#include <sys/queue.h>
+#else
+#include <compat/queue.h>
+#endif
+
+#ifndef HAVE_CLOCK_GETTIME
+#include <compat/clock_gettime.h>
+#endif
+
+#include <bsm/libbsm.h>
+#include <bsm/audit_filter.h>
+#include <bsm/audit_internal.h>
+
+#include <err.h>
+#include <fcntl.h>
+#include <signal.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+
+#include "auditfilterd.h"
+
+/*
+ * Global list of registered filters.
+ */
+struct auditfilter_module_list filter_list;
+
+/*
+ * Configuration and signal->main flags.
+ */
+int debug; /* Debugging mode requested, don't detach. */
+int reread_config; /* SIGHUP has been received. */
+int quit; /* SIGQUIT/TERM/INT has been received. */
+
+static void
+usage(void)
+{
+
+ fprintf(stderr, "auditfilterd [-d] [-c conffile] [-p pipefile]"
+ " [-t trailfile]\n");
+ fprintf(stderr, " -c Specify configuration file (default: %s)\n",
+ AUDITFILTERD_CONFFILE);
+ fprintf(stderr, " -d Debugging mode, don't daemonize\n");
+ fprintf(stderr, " -p Specify pipe file (default: %s)\n",
+ AUDITFILTERD_PIPEFILE);
+ fprintf(stderr, " -t Specify audit trail file (default: none)\n");
+ exit(-1);
+}
+
+static void
+auditfilterd_init(void)
+{
+
+ TAILQ_INIT(&filter_list);
+}
+
+static void
+signal_handler(int signum)
+{
+
+ switch (signum) {
+ case SIGHUP:
+ reread_config++;
+ break;
+
+ case SIGINT:
+ case SIGTERM:
+ case SIGQUIT:
+ quit++;
+ break;
+ }
+}
+
+/*
+ * Present raw BSM to a set of registered and interested filters.
+ */
+static void
+present_rawrecord(struct timespec *ts, u_char *data, u_int len)
+{
+ struct auditfilter_module *am;
+
+ TAILQ_FOREACH(am, &filter_list, am_list) {
+ if (am->am_rawrecord != NULL)
+ (am->am_rawrecord)(am, ts, data, len);
+ }
+}
+
+/*
+ * Parse the BSM into a set of tokens, which will be passed to registered
+ * and interested filters.
+ */
+#define MAX_TOKENS 128 /* Maximum tokens we handle per record. */
+static void
+present_tokens(struct timespec *ts, u_char *data, u_int len)
+{
+ struct auditfilter_module *am;
+ tokenstr_t tokens[MAX_TOKENS];
+ u_int bytesread;
+ int tokencount;
+
+ tokencount = 0;
+ while (bytesread < len) {
+ if (au_fetch_tok(&tokens[tokencount], data + bytesread,
+ len - bytesread) == -1)
+ break;
+ bytesread += tokens[tokencount].len;
+ tokencount++;
+ }
+
+ TAILQ_FOREACH(am, &filter_list, am_list) {
+ if (am->am_record != NULL)
+ (am->am_record)(am, ts, tokencount, tokens);
+ }
+}
+
+/*
+ * The main loop spins pulling records out of the record source and passing
+ * them to modules for processing.
+ */
+static void
+mainloop_file(const char *conffile, const char *trailfile, FILE *trail_fp)
+{
+ struct timespec ts;
+ FILE *conf_fp;
+ u_char *buf;
+ int reclen;
+
+ while (1) {
+ /*
+ * On SIGHUP, we reread the configuration file and reopen
+ * the trail file.
+ */
+ if (reread_config) {
+ reread_config = 0;
+ warnx("rereading configuration");
+ conf_fp = fopen(conffile, "r");
+ if (conf_fp == NULL)
+ err(-1, "%s", conffile);
+ auditfilterd_conf(conffile, conf_fp);
+ fclose(conf_fp);
+
+ fclose(trail_fp);
+ trail_fp = fopen(trailfile, "r");
+ if (trail_fp == NULL)
+ err(-1, "%s", trailfile);
+ }
+ if (quit) {
+ warnx("quitting");
+ break;
+ }
+
+ /*
+ * For now, be relatively unrobust about incomplete records,
+ * but in the future will want to do better. Need to look
+ * more at the right blocking and signal behavior here.
+ */
+ reclen = au_read_rec(trail_fp, &buf);
+ if (reclen == -1)
+ continue;
+ if (clock_gettime(CLOCK_REALTIME, &ts) < 0)
+ err(-1, "clock_gettime");
+ present_rawrecord(&ts, buf, reclen);
+ present_tokens(&ts, buf, reclen);
+ free(buf);
+ }
+}
+
+/*
+ * The main loop spins pulling records out of the record source and passing
+ * them to modules for processing. This version of the function accepts
+ * discrete record input from a file descriptor, as opposed to buffered input
+ * from a file stream.
+ */
+static void
+mainloop_pipe(const char *conffile, const char *pipefile __unused, int pipe_fd)
+{
+ u_char record[MAX_AUDIT_RECORD_SIZE];
+ struct timespec ts;
+ FILE *conf_fp;
+ int reclen;
+
+ while (1) {
+ /*
+ * On SIGHUP, we reread the configuration file. Unlike with
+ * a trail file, we don't reopen the pipe, as we don't want
+ * to miss records which will be flushed if we do.
+ */
+ if (reread_config) {
+ reread_config = 0;
+ warnx("rereading configuration");
+ conf_fp = fopen(conffile, "r");
+ if (conf_fp == NULL)
+ err(-1, "%s", conffile);
+ auditfilterd_conf(conffile, conf_fp);
+ fclose(conf_fp);
+ }
+ if (quit) {
+ warnx("quitting");
+ break;
+ }
+
+ /*
+ * For now, be relatively unrobust about incomplete records,
+ * but in the future will want to do better. Need to look
+ * more at the right blocking and signal behavior here.
+ */
+ reclen = read(pipe_fd, record, MAX_AUDIT_RECORD_SIZE);
+ if (reclen < 0)
+ continue;
+ if (clock_gettime(CLOCK_REALTIME, &ts) < 0)
+ err(-1, "clock_gettime");
+ present_rawrecord(&ts, record, reclen);
+ present_tokens(&ts, record, reclen);
+ }
+}
+
+int
+main(int argc, char *argv[])
+{
+ const char *pipefile, *trailfile, *conffile;
+ FILE *trail_fp, *conf_fp;
+ struct stat sb;
+ int pipe_fd;
+ int ch;
+
+ conffile = AUDITFILTERD_CONFFILE;
+ trailfile = NULL;
+ pipefile = NULL;
+ while ((ch = getopt(argc, argv, "c:dp:t:")) != -1) {
+ switch (ch) {
+ case 'c':
+ conffile = optarg;
+ break;
+
+ case 'd':
+ debug++;
+ break;
+
+ case 't':
+ if (trailfile != NULL || pipefile != NULL)
+ usage();
+ trailfile = optarg;
+ break;
+
+ case 'p':
+ if (pipefile != NULL || trailfile != NULL)
+ usage();
+ pipefile = optarg;
+ break;
+
+ default:
+ usage();
+ }
+ }
+
+ argc -= optind;
+ argv += optind;
+
+ if (argc != 0)
+ usage();
+
+ /*
+ * We allow only one of a pipe or a trail to be used. If none is
+ * specified, we provide a default pipe path.
+ */
+ if (pipefile == NULL && trailfile == NULL)
+ pipefile = AUDITFILTERD_PIPEFILE;
+
+ if (pipefile != NULL) {
+ pipe_fd = open(pipefile, O_RDONLY);
+ if (pipe_fd < 0)
+ err(-1, "open:%s", pipefile);
+ if (fstat(pipe_fd, &sb) < 0)
+ err(-1, "stat: %s", pipefile);
+ if (!S_ISCHR(sb.st_mode))
+ errx(-1, "fstat: %s not device", pipefile);
+ } else {
+ trail_fp = fopen(trailfile, "r");
+ if (trail_fp == NULL)
+ err(-1, "%s", trailfile);
+ }
+
+ conf_fp = fopen(conffile, "r");
+ if (conf_fp == NULL)
+ err(-1, "%s", conffile);
+
+ auditfilterd_init();
+ if (auditfilterd_conf(conffile, conf_fp) < 0)
+ exit(-1);
+ fclose(conf_fp);
+
+ if (!debug) {
+ if (daemon(0, 0) < 0)
+ err(-1, "daemon");
+ }
+
+ signal(SIGHUP, signal_handler);
+ signal(SIGINT, signal_handler);
+ signal(SIGQUIT, signal_handler);
+ signal(SIGTERM, signal_handler);
+
+ if (pipefile != NULL)
+ mainloop_pipe(conffile, pipefile, pipe_fd);
+ else
+ mainloop_file(conffile, trailfile, trail_fp);
+
+ auditfilterd_conf_shutdown();
+ return (0);
+}
Deleted: vendor/openbsm/1.2_alpha4/bin/auditfilterd/auditfilterd.h
===================================================================
--- vendor/openbsm/dist/bin/auditfilterd/auditfilterd.h 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/bin/auditfilterd/auditfilterd.h 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,79 +0,0 @@
-/*-
- * Copyright (c) 2006 Robert N. M. Watson
- * All rights reserved.
- *
- * This software was developed by Robert Watson for the TrustedBSD Project.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * $P4: //depot/projects/trustedbsd/openbsm/bin/auditfilterd/auditfilterd.h#5 $
- */
-
-#define AUDITFILTERD_CONFFILE "/etc/security/audit_filter"
-#define AUDITFILTERD_PIPEFILE "/dev/auditpipe"
-
-/*
- * Limit on the number of arguments that can appear in an audit_filterd
- * configuration line.
- */
-#define AUDITFILTERD_CONF_MAXARGS 256
-
-/*
- * Data structure description each instantiated module.
- */
-struct auditfilter_module {
- /*
- * Fields from configuration file and dynamic linker.
- */
- char *am_modulename;
- char *am_arg_buffer;
- int am_argc;
- char **am_argv;
- void *am_dlhandle;
-
- /*
- * Fields provided by or extracted from the module.
- */
- void *am_cookie;
- audit_filter_attach_t am_attach;
- audit_filter_reinit_t am_reinit;
- audit_filter_record_t am_record;
- audit_filter_rawrecord_t am_rawrecord;
- audit_filter_detach_t am_detach;
-
- /*
- * Fields for maintaining the list of modules.
- */
- TAILQ_ENTRY(auditfilter_module) am_list;
-};
-TAILQ_HEAD(auditfilter_module_list, auditfilter_module);
-
-/*
- * List of currently registered modules.
- */
-extern struct auditfilter_module_list filter_list;
-
-/*
- * Function definitions.
- */
-int auditfilterd_conf(const char *filename, FILE *fp);
-void auditfilterd_conf_shutdown(void);
Copied: vendor/openbsm/1.2_alpha4/bin/auditfilterd/auditfilterd.h (from rev 11163, vendor/openbsm/dist/bin/auditfilterd/auditfilterd.h)
===================================================================
--- vendor/openbsm/1.2_alpha4/bin/auditfilterd/auditfilterd.h (rev 0)
+++ vendor/openbsm/1.2_alpha4/bin/auditfilterd/auditfilterd.h 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,77 @@
+/*-
+ * Copyright (c) 2006 Robert N. M. Watson
+ * All rights reserved.
+ *
+ * This software was developed by Robert Watson for the TrustedBSD Project.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#define AUDITFILTERD_CONFFILE "/etc/security/audit_filter"
+#define AUDITFILTERD_PIPEFILE "/dev/auditpipe"
+
+/*
+ * Limit on the number of arguments that can appear in an audit_filterd
+ * configuration line.
+ */
+#define AUDITFILTERD_CONF_MAXARGS 256
+
+/*
+ * Data structure description each instantiated module.
+ */
+struct auditfilter_module {
+ /*
+ * Fields from configuration file and dynamic linker.
+ */
+ char *am_modulename;
+ char *am_arg_buffer;
+ int am_argc;
+ char **am_argv;
+ void *am_dlhandle;
+
+ /*
+ * Fields provided by or extracted from the module.
+ */
+ void *am_cookie;
+ audit_filter_attach_t am_attach;
+ audit_filter_reinit_t am_reinit;
+ audit_filter_record_t am_record;
+ audit_filter_rawrecord_t am_rawrecord;
+ audit_filter_detach_t am_detach;
+
+ /*
+ * Fields for maintaining the list of modules.
+ */
+ TAILQ_ENTRY(auditfilter_module) am_list;
+};
+TAILQ_HEAD(auditfilter_module_list, auditfilter_module);
+
+/*
+ * List of currently registered modules.
+ */
+extern struct auditfilter_module_list filter_list;
+
+/*
+ * Function definitions.
+ */
+int auditfilterd_conf(const char *filename, FILE *fp);
+void auditfilterd_conf_shutdown(void);
Deleted: vendor/openbsm/1.2_alpha4/bin/auditfilterd/auditfilterd_conf.c
===================================================================
--- vendor/openbsm/dist/bin/auditfilterd/auditfilterd_conf.c 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/bin/auditfilterd/auditfilterd_conf.c 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,513 +0,0 @@
-/*-
- * Copyright (c) 2006 Robert N. M. Watson
- * All rights reserved.
- *
- * This software was developed by Robert Watson for the TrustedBSD Project.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * $P4: //depot/projects/trustedbsd/openbsm/bin/auditfilterd/auditfilterd_conf.c#5 $
- */
-
-/*
- * Configuration file parser for auditfilterd. The configuration file is a
- * very simple format, similar to other BSM configuration files, consisting
- * of configuration entries of one line each. The configuration function is
- * aware of previous runs, and will update the current configuration as
- * needed.
- *
- * Modules are in one of two states: attached, or detached. If attach fails,
- * detach is not called because it was not attached. If a module is attached
- * and a call to its reinit method fails, we will detach it.
- *
- * Modules are passed a (void *) reference to their configuration state so
- * that they may pass this into any common APIs we provide which may rely on
- * that state. Currently, the only such API is the cookie API, which allows
- * per-instance state to be maintained by a module. In the future, this will
- * also be used to support per-instance preselection state.
- */
-
-#include <sys/types.h>
-
-#include <config/config.h>
-#ifdef HAVE_FULL_QUEUE_H
-#include <sys/queue.h>
-#else
-#include <compat/queue.h>
-#endif
-
-#include <bsm/libbsm.h>
-#include <bsm/audit_filter.h>
-
-#include <dlfcn.h>
-#include <err.h>
-#include <errno.h>
-#include <limits.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-
-#include "auditfilterd.h"
-
-/*
- * Free an individual auditfilter_module structure. Will not shut down the
- * module, just frees the memory. Does so conditional on pointers being
- * non-NULL so that it can be used on partially allocated structures.
- */
-static void
-auditfilter_module_free(struct auditfilter_module *am)
-{
-
- if (am->am_modulename != NULL)
- free(am->am_modulename);
- if (am->am_arg_buffer != NULL)
- free(am->am_arg_buffer);
- if (am->am_argv != NULL)
- free(am->am_argv);
-}
-
-/*
- * Free all memory associated with an auditfilter_module list. Does not
- * dlclose() or shut down the modules, just free the memory. Use
- * auditfilter_module_list_detach() for that, if required.
- */
-static void
-auditfilter_module_list_free(struct auditfilter_module_list *list)
-{
- struct auditfilter_module *am;
-
- while (!(TAILQ_EMPTY(list))) {
- am = TAILQ_FIRST(list);
- TAILQ_REMOVE(list, am, am_list);
- auditfilter_module_free(am);
- }
-}
-
-/*
- * Detach an attached module from an auditfilter_module structure. Does not
- * free the data structure itself.
- */
-static void
-auditfilter_module_detach(struct auditfilter_module *am)
-{
-
- if (am->am_detach != NULL)
- am->am_detach(am);
- am->am_cookie = NULL;
- (void)dlclose(am->am_dlhandle);
- am->am_dlhandle = NULL;
-}
-
-/*
- * Walk an auditfilter_module list, detaching each module. Intended to be
- * combined with auditfilter_module_list_free().
- */
-static void
-auditfilter_module_list_detach(struct auditfilter_module_list *list)
-{
- struct auditfilter_module *am;
-
- TAILQ_FOREACH(am, list, am_list)
- auditfilter_module_detach(am);
-}
-
-/*
- * Given a filled out auditfilter_module, use dlopen() and dlsym() to attach
- * the module. If we fail, leave fields in the state we found them.
- *
- * XXXRW: Need a better way to report errors.
- */
-static int
-auditfilter_module_attach(struct auditfilter_module *am)
-{
-
- am->am_dlhandle = dlopen(am->am_modulename, RTLD_NOW);
- if (am->am_dlhandle == NULL) {
- warnx("auditfilter_module_attach: %s: %s", am->am_modulename,
- dlerror());
- return (-1);
- }
-
- /*
- * Not implementing these is not considered a failure condition,
- * although we might want to consider warning if obvious stuff is
- * not implemented, such as am_record.
- */
- am->am_attach = dlsym(am->am_dlhandle, AUDIT_FILTER_ATTACH_STRING);
- am->am_reinit = dlsym(am->am_dlhandle, AUDIT_FILTER_REINIT_STRING);
- am->am_record = dlsym(am->am_dlhandle, AUDIT_FILTER_RECORD_STRING);
- am->am_rawrecord = dlsym(am->am_dlhandle,
- AUDIT_FILTER_RAWRECORD_STRING);
- am->am_detach = dlsym(am->am_dlhandle, AUDIT_FILTER_DETACH_STRING);
-
- if (am->am_attach != NULL) {
- if (am->am_attach(am, am->am_argc, am->am_argv)
- != AUDIT_FILTER_SUCCESS) {
- warnx("auditfilter_module_attach: %s: failed",
- am->am_modulename);
- dlclose(am->am_dlhandle);
- am->am_dlhandle = NULL;
- am->am_cookie = NULL;
- am->am_attach = NULL;
- am->am_reinit = NULL;
- am->am_record = NULL;
- am->am_rawrecord = NULL;
- am->am_detach = NULL;
- return (-1);
- }
- }
-
- return (0);
-}
-
-/*
- * When the arguments for a module are changed, we notify the module through
- * a call to its reinit method, if any. Return 0 on success, or -1 on
- * failure.
- */
-static int
-auditfilter_module_reinit(struct auditfilter_module *am)
-{
-
- if (am->am_reinit == NULL)
- return (0);
-
- if (am->am_reinit(am, am->am_argc, am->am_argv) !=
- AUDIT_FILTER_SUCCESS) {
- warnx("auditfilter_module_reinit: %s: failed",
- am->am_modulename);
- return (-1);
- }
-
- return (0);
-}
-
-/*
- * Given a configuration line, generate an auditfilter_module structure that
- * describes it; caller will not pass comments in, so they are not looked
- * for. Do not attempt to instantiate it. Will destroy the contents of
- * 'buffer'.
- *
- * Configuration lines consist of two parts: the module name and arguments
- * separated by a ':', and then a ','-delimited list of arguments.
- *
- * XXXRW: Need to decide where to send the warning output -- stderr for now.
- */
-struct auditfilter_module *
-auditfilter_module_parse(const char *filename, int linenumber, char *buffer)
-{
- char *arguments, *module, **ap;
- struct auditfilter_module *am;
-
- am = malloc(sizeof(*am));
- if (am == NULL) {
- warn("auditfilter_module_parse: %s:%d", filename, linenumber);
- return (NULL);
- }
- bzero(am, sizeof(*am));
-
- /*
- * First, break out the module and arguments strings. We look for
- * one extra argument to make sure there are no more :'s in the line.
- * That way, we prevent modules from using argument strings that, in
- * the future, may cause problems for adding additional columns.
- */
- arguments = buffer;
- module = strsep(&arguments, ":");
- if (module == NULL || arguments == NULL) {
- warnx("auditfilter_module_parse: %s:%d: parse error",
- filename, linenumber);
- return (NULL);
- }
-
- am->am_modulename = strdup(module);
- if (am->am_modulename == NULL) {
- warn("auditfilter_module_parse: %s:%d", filename, linenumber);
- auditfilter_module_free(am);
- return (NULL);
- }
-
- am->am_arg_buffer = strdup(buffer);
- if (am->am_arg_buffer == NULL) {
- warn("auditfilter_module_parse: %s:%d", filename, linenumber);
- auditfilter_module_free(am);
- return (NULL);
- }
-
- /*
- * Now, break out the arguments string into a series of arguments.
- * This is a bit more complicated, and requires cleanup if things go
- * wrong.
- */
- am->am_argv = malloc(sizeof(char *) * AUDITFILTERD_CONF_MAXARGS);
- if (am->am_argv == NULL) {
- warn("auditfilter_module_parse: %s:%d", filename, linenumber);
- auditfilter_module_free(am);
- return (NULL);
- }
- bzero(am->am_argv, sizeof(char *) * AUDITFILTERD_CONF_MAXARGS);
- am->am_argc = 0;
- for (ap = am->am_argv; (*ap = strsep(&arguments, " \t")) != NULL;) {
- if (**ap != '\0') {
- am->am_argc++;
- if (++ap >= &am->am_argv[AUDITFILTERD_CONF_MAXARGS])
- break;
- }
- }
- if (ap >= &am->am_argv[AUDITFILTERD_CONF_MAXARGS]) {
- warnx("auditfilter_module_parse: %s:%d: too many arguments",
- filename, linenumber);
- auditfilter_module_free(am);
- return (NULL);
- }
-
- return (am);
-}
-
-/*
- * Read a configuration file, and populate 'list' with the configuration
- * lines. Does not attempt to instantiate the configuration, just read it
- * into a useful set of data structures.
- */
-static int
-auditfilterd_conf_read(const char *filename, FILE *fp,
- struct auditfilter_module_list *list)
-{
- int error, linenumber, syntaxerror;
- struct auditfilter_module *am;
- char buffer[LINE_MAX];
-
- syntaxerror = 0;
- linenumber = 0;
- while (!feof(fp) && !ferror(fp)) {
- if (fgets(buffer, LINE_MAX, fp) == NULL)
- break;
- linenumber++;
- if (buffer[0] == '#' || strlen(buffer) < 1)
- continue;
- buffer[strlen(buffer)-1] = '\0';
- am = auditfilter_module_parse(filename, linenumber, buffer);
- if (am == NULL) {
- syntaxerror = 1;
- break;
- }
- TAILQ_INSERT_HEAD(list, am, am_list);
- }
-
- /*
- * File I/O error.
- */
- if (ferror(fp)) {
- error = errno;
- auditfilter_module_list_free(list);
- errno = error;
- return (-1);
- }
-
- /*
- * Syntax error.
- */
- if (syntaxerror) {
- auditfilter_module_list_free(list);
- errno = EINVAL;
- return (-1);
- }
- return (0);
-}
-
-/*
- * Apply changes necessary to bring a new configuration into force. The new
- * configuration data is passed in, and the current configuration is updated
- * to match it. The contents of 'list' are freed or otherwise disposed of
- * before return.
- *
- * The algorithms here are not very efficient, but this is an infrequent
- * operation on very short lists.
- */
-static void
-auditfilterd_conf_apply(struct auditfilter_module_list *list)
-{
- struct auditfilter_module *am1, *am2, *am_tmp;
- int argc_tmp, found;
- char **argv_tmp;
-
- /*
- * First, remove remove and detach any entries that appear in the
- * current configuration, but not the new configuration.
- */
- TAILQ_FOREACH_SAFE(am1, &filter_list, am_list, am_tmp) {
- found = 0;
- TAILQ_FOREACH(am2, list, am_list) {
- if (strcmp(am1->am_modulename, am2->am_modulename)
- == 0) {
- found = 1;
- break;
- }
- }
- if (found)
- continue;
-
- /*
- * am1 appears in filter_list, but not the new list, detach
- * and free the module.
- */
- warnx("detaching module %s", am1->am_modulename);
- TAILQ_REMOVE(&filter_list, am1, am_list);
- auditfilter_module_detach(am1);
- auditfilter_module_free(am1);
- }
-
- /*
- * Next, update the configuration of any modules that appear in both
- * lists. We do this by swapping the two argc and argv values and
- * freeing the new one, rather than detaching the old one and
- * attaching the new one. That way module state is preserved.
- */
- TAILQ_FOREACH(am1, &filter_list, am_list) {
- found = 0;
- TAILQ_FOREACH(am2, list, am_list) {
- if (strcmp(am1->am_modulename, am2->am_modulename)
- == 0) {
- found = 1;
- break;
- }
- }
- if (!found)
- continue;
-
- /*
- * Swap the arguments.
- */
- argc_tmp = am1->am_argc;
- argv_tmp = am1->am_argv;
- am1->am_argc = am2->am_argc;
- am1->am_argv = am2->am_argv;
- am2->am_argc = argc_tmp;
- am2->am_argv = argv_tmp;
-
- /*
- * The reinit is a bit tricky: if reinit fails, we actually
- * remove the old entry and detach that, as we don't allow
- * running modules to be out of sync with the configuration
- * file.
- */
- warnx("reiniting module %s", am1->am_modulename);
- if (auditfilter_module_reinit(am1) != 0) {
- warnx("reinit failed for module %s, detaching",
- am1->am_modulename);
- TAILQ_REMOVE(&filter_list, am1, am_list);
- auditfilter_module_detach(am1);
- auditfilter_module_free(am1);
- }
-
- /*
- * Free the entry from the new list, which will discard the
- * old arguments. No need to detach, as it was never
- * attached in the first place.
- */
- TAILQ_REMOVE(list, am2, am_list);
- auditfilter_module_free(am2);
- }
-
- /*
- * Finally, attach any new entries that don't appear in the old
- * configuration, and if they attach successfully, move them to the
- * real configuration list.
- */
- TAILQ_FOREACH(am1, list, am_list) {
- found = 0;
- TAILQ_FOREACH(am2, &filter_list, am_list) {
- if (strcmp(am1->am_modulename, am2->am_modulename)
- == 0) {
- found = 1;
- break;
- }
- }
- if (found)
- continue;
- /*
- * Attach the entry. If it succeeds, add to filter_list,
- * otherwise, free. No need to detach if attach failed.
- */
- warnx("attaching module %s", am1->am_modulename);
- TAILQ_REMOVE(list, am1, am_list);
- if (auditfilter_module_attach(am1) != 0) {
- warnx("attaching module %s failed",
- am1->am_modulename);
- auditfilter_module_free(am1);
- } else
- TAILQ_INSERT_HEAD(&filter_list, am1, am_list);
- }
-
- if (TAILQ_FIRST(list) != NULL)
- warnx("auditfilterd_conf_apply: new list not empty\n");
-}
-
-/*
- * Read the new configuration file into a local list. If the configuration
- * file is parsed OK, then apply the changes.
- */
-int
-auditfilterd_conf(const char *filename, FILE *fp)
-{
- struct auditfilter_module_list list;
-
- TAILQ_INIT(&list);
- if (auditfilterd_conf_read(filename, fp, &list) < 0)
- return (-1);
-
- auditfilterd_conf_apply(&list);
-
- return (0);
-}
-
-/*
- * Detach and free all active filter modules for daemon shutdown.
- */
-void
-auditfilterd_conf_shutdown(void)
-{
-
- auditfilter_module_list_detach(&filter_list);
- auditfilter_module_list_free(&filter_list);
-}
-
-/*
- * APIs to allow modules to query and set their per-instance cookie.
- */
-void
-audit_filter_getcookie(void *instance, void **cookie)
-{
- struct auditfilter_module *am;
-
- am = (struct auditfilter_module *)instance;
- *cookie = am->am_cookie;
-}
-
-void
-audit_filter_setcookie(void *instance, void *cookie)
-{
- struct auditfilter_module *am;
-
- am = (struct auditfilter_module *)instance;
- am->am_cookie = cookie;
-}
Copied: vendor/openbsm/1.2_alpha4/bin/auditfilterd/auditfilterd_conf.c (from rev 11163, vendor/openbsm/dist/bin/auditfilterd/auditfilterd_conf.c)
===================================================================
--- vendor/openbsm/1.2_alpha4/bin/auditfilterd/auditfilterd_conf.c (rev 0)
+++ vendor/openbsm/1.2_alpha4/bin/auditfilterd/auditfilterd_conf.c 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,511 @@
+/*-
+ * Copyright (c) 2006 Robert N. M. Watson
+ * All rights reserved.
+ *
+ * This software was developed by Robert Watson for the TrustedBSD Project.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+/*
+ * Configuration file parser for auditfilterd. The configuration file is a
+ * very simple format, similar to other BSM configuration files, consisting
+ * of configuration entries of one line each. The configuration function is
+ * aware of previous runs, and will update the current configuration as
+ * needed.
+ *
+ * Modules are in one of two states: attached, or detached. If attach fails,
+ * detach is not called because it was not attached. If a module is attached
+ * and a call to its reinit method fails, we will detach it.
+ *
+ * Modules are passed a (void *) reference to their configuration state so
+ * that they may pass this into any common APIs we provide which may rely on
+ * that state. Currently, the only such API is the cookie API, which allows
+ * per-instance state to be maintained by a module. In the future, this will
+ * also be used to support per-instance preselection state.
+ */
+
+#include <sys/types.h>
+
+#include <config/config.h>
+#ifdef HAVE_FULL_QUEUE_H
+#include <sys/queue.h>
+#else
+#include <compat/queue.h>
+#endif
+
+#include <bsm/libbsm.h>
+#include <bsm/audit_filter.h>
+
+#include <dlfcn.h>
+#include <err.h>
+#include <errno.h>
+#include <limits.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+
+#include "auditfilterd.h"
+
+/*
+ * Free an individual auditfilter_module structure. Will not shut down the
+ * module, just frees the memory. Does so conditional on pointers being
+ * non-NULL so that it can be used on partially allocated structures.
+ */
+static void
+auditfilter_module_free(struct auditfilter_module *am)
+{
+
+ if (am->am_modulename != NULL)
+ free(am->am_modulename);
+ if (am->am_arg_buffer != NULL)
+ free(am->am_arg_buffer);
+ if (am->am_argv != NULL)
+ free(am->am_argv);
+}
+
+/*
+ * Free all memory associated with an auditfilter_module list. Does not
+ * dlclose() or shut down the modules, just free the memory. Use
+ * auditfilter_module_list_detach() for that, if required.
+ */
+static void
+auditfilter_module_list_free(struct auditfilter_module_list *list)
+{
+ struct auditfilter_module *am;
+
+ while (!(TAILQ_EMPTY(list))) {
+ am = TAILQ_FIRST(list);
+ TAILQ_REMOVE(list, am, am_list);
+ auditfilter_module_free(am);
+ }
+}
+
+/*
+ * Detach an attached module from an auditfilter_module structure. Does not
+ * free the data structure itself.
+ */
+static void
+auditfilter_module_detach(struct auditfilter_module *am)
+{
+
+ if (am->am_detach != NULL)
+ am->am_detach(am);
+ am->am_cookie = NULL;
+ (void)dlclose(am->am_dlhandle);
+ am->am_dlhandle = NULL;
+}
+
+/*
+ * Walk an auditfilter_module list, detaching each module. Intended to be
+ * combined with auditfilter_module_list_free().
+ */
+static void
+auditfilter_module_list_detach(struct auditfilter_module_list *list)
+{
+ struct auditfilter_module *am;
+
+ TAILQ_FOREACH(am, list, am_list)
+ auditfilter_module_detach(am);
+}
+
+/*
+ * Given a filled out auditfilter_module, use dlopen() and dlsym() to attach
+ * the module. If we fail, leave fields in the state we found them.
+ *
+ * XXXRW: Need a better way to report errors.
+ */
+static int
+auditfilter_module_attach(struct auditfilter_module *am)
+{
+
+ am->am_dlhandle = dlopen(am->am_modulename, RTLD_NOW);
+ if (am->am_dlhandle == NULL) {
+ warnx("auditfilter_module_attach: %s: %s", am->am_modulename,
+ dlerror());
+ return (-1);
+ }
+
+ /*
+ * Not implementing these is not considered a failure condition,
+ * although we might want to consider warning if obvious stuff is
+ * not implemented, such as am_record.
+ */
+ am->am_attach = dlsym(am->am_dlhandle, AUDIT_FILTER_ATTACH_STRING);
+ am->am_reinit = dlsym(am->am_dlhandle, AUDIT_FILTER_REINIT_STRING);
+ am->am_record = dlsym(am->am_dlhandle, AUDIT_FILTER_RECORD_STRING);
+ am->am_rawrecord = dlsym(am->am_dlhandle,
+ AUDIT_FILTER_RAWRECORD_STRING);
+ am->am_detach = dlsym(am->am_dlhandle, AUDIT_FILTER_DETACH_STRING);
+
+ if (am->am_attach != NULL) {
+ if (am->am_attach(am, am->am_argc, am->am_argv)
+ != AUDIT_FILTER_SUCCESS) {
+ warnx("auditfilter_module_attach: %s: failed",
+ am->am_modulename);
+ dlclose(am->am_dlhandle);
+ am->am_dlhandle = NULL;
+ am->am_cookie = NULL;
+ am->am_attach = NULL;
+ am->am_reinit = NULL;
+ am->am_record = NULL;
+ am->am_rawrecord = NULL;
+ am->am_detach = NULL;
+ return (-1);
+ }
+ }
+
+ return (0);
+}
+
+/*
+ * When the arguments for a module are changed, we notify the module through
+ * a call to its reinit method, if any. Return 0 on success, or -1 on
+ * failure.
+ */
+static int
+auditfilter_module_reinit(struct auditfilter_module *am)
+{
+
+ if (am->am_reinit == NULL)
+ return (0);
+
+ if (am->am_reinit(am, am->am_argc, am->am_argv) !=
+ AUDIT_FILTER_SUCCESS) {
+ warnx("auditfilter_module_reinit: %s: failed",
+ am->am_modulename);
+ return (-1);
+ }
+
+ return (0);
+}
+
+/*
+ * Given a configuration line, generate an auditfilter_module structure that
+ * describes it; caller will not pass comments in, so they are not looked
+ * for. Do not attempt to instantiate it. Will destroy the contents of
+ * 'buffer'.
+ *
+ * Configuration lines consist of two parts: the module name and arguments
+ * separated by a ':', and then a ','-delimited list of arguments.
+ *
+ * XXXRW: Need to decide where to send the warning output -- stderr for now.
+ */
+struct auditfilter_module *
+auditfilter_module_parse(const char *filename, int linenumber, char *buffer)
+{
+ char *arguments, *module, **ap;
+ struct auditfilter_module *am;
+
+ am = malloc(sizeof(*am));
+ if (am == NULL) {
+ warn("auditfilter_module_parse: %s:%d", filename, linenumber);
+ return (NULL);
+ }
+ bzero(am, sizeof(*am));
+
+ /*
+ * First, break out the module and arguments strings. We look for
+ * one extra argument to make sure there are no more :'s in the line.
+ * That way, we prevent modules from using argument strings that, in
+ * the future, may cause problems for adding additional columns.
+ */
+ arguments = buffer;
+ module = strsep(&arguments, ":");
+ if (module == NULL || arguments == NULL) {
+ warnx("auditfilter_module_parse: %s:%d: parse error",
+ filename, linenumber);
+ return (NULL);
+ }
+
+ am->am_modulename = strdup(module);
+ if (am->am_modulename == NULL) {
+ warn("auditfilter_module_parse: %s:%d", filename, linenumber);
+ auditfilter_module_free(am);
+ return (NULL);
+ }
+
+ am->am_arg_buffer = strdup(buffer);
+ if (am->am_arg_buffer == NULL) {
+ warn("auditfilter_module_parse: %s:%d", filename, linenumber);
+ auditfilter_module_free(am);
+ return (NULL);
+ }
+
+ /*
+ * Now, break out the arguments string into a series of arguments.
+ * This is a bit more complicated, and requires cleanup if things go
+ * wrong.
+ */
+ am->am_argv = malloc(sizeof(char *) * AUDITFILTERD_CONF_MAXARGS);
+ if (am->am_argv == NULL) {
+ warn("auditfilter_module_parse: %s:%d", filename, linenumber);
+ auditfilter_module_free(am);
+ return (NULL);
+ }
+ bzero(am->am_argv, sizeof(char *) * AUDITFILTERD_CONF_MAXARGS);
+ am->am_argc = 0;
+ for (ap = am->am_argv; (*ap = strsep(&arguments, " \t")) != NULL;) {
+ if (**ap != '\0') {
+ am->am_argc++;
+ if (++ap >= &am->am_argv[AUDITFILTERD_CONF_MAXARGS])
+ break;
+ }
+ }
+ if (ap >= &am->am_argv[AUDITFILTERD_CONF_MAXARGS]) {
+ warnx("auditfilter_module_parse: %s:%d: too many arguments",
+ filename, linenumber);
+ auditfilter_module_free(am);
+ return (NULL);
+ }
+
+ return (am);
+}
+
+/*
+ * Read a configuration file, and populate 'list' with the configuration
+ * lines. Does not attempt to instantiate the configuration, just read it
+ * into a useful set of data structures.
+ */
+static int
+auditfilterd_conf_read(const char *filename, FILE *fp,
+ struct auditfilter_module_list *list)
+{
+ int error, linenumber, syntaxerror;
+ struct auditfilter_module *am;
+ char buffer[LINE_MAX];
+
+ syntaxerror = 0;
+ linenumber = 0;
+ while (!feof(fp) && !ferror(fp)) {
+ if (fgets(buffer, LINE_MAX, fp) == NULL)
+ break;
+ linenumber++;
+ if (buffer[0] == '#' || strlen(buffer) < 1)
+ continue;
+ buffer[strlen(buffer)-1] = '\0';
+ am = auditfilter_module_parse(filename, linenumber, buffer);
+ if (am == NULL) {
+ syntaxerror = 1;
+ break;
+ }
+ TAILQ_INSERT_HEAD(list, am, am_list);
+ }
+
+ /*
+ * File I/O error.
+ */
+ if (ferror(fp)) {
+ error = errno;
+ auditfilter_module_list_free(list);
+ errno = error;
+ return (-1);
+ }
+
+ /*
+ * Syntax error.
+ */
+ if (syntaxerror) {
+ auditfilter_module_list_free(list);
+ errno = EINVAL;
+ return (-1);
+ }
+ return (0);
+}
+
+/*
+ * Apply changes necessary to bring a new configuration into force. The new
+ * configuration data is passed in, and the current configuration is updated
+ * to match it. The contents of 'list' are freed or otherwise disposed of
+ * before return.
+ *
+ * The algorithms here are not very efficient, but this is an infrequent
+ * operation on very short lists.
+ */
+static void
+auditfilterd_conf_apply(struct auditfilter_module_list *list)
+{
+ struct auditfilter_module *am1, *am2, *am_tmp;
+ int argc_tmp, found;
+ char **argv_tmp;
+
+ /*
+ * First, remove remove and detach any entries that appear in the
+ * current configuration, but not the new configuration.
+ */
+ TAILQ_FOREACH_SAFE(am1, &filter_list, am_list, am_tmp) {
+ found = 0;
+ TAILQ_FOREACH(am2, list, am_list) {
+ if (strcmp(am1->am_modulename, am2->am_modulename)
+ == 0) {
+ found = 1;
+ break;
+ }
+ }
+ if (found)
+ continue;
+
+ /*
+ * am1 appears in filter_list, but not the new list, detach
+ * and free the module.
+ */
+ warnx("detaching module %s", am1->am_modulename);
+ TAILQ_REMOVE(&filter_list, am1, am_list);
+ auditfilter_module_detach(am1);
+ auditfilter_module_free(am1);
+ }
+
+ /*
+ * Next, update the configuration of any modules that appear in both
+ * lists. We do this by swapping the two argc and argv values and
+ * freeing the new one, rather than detaching the old one and
+ * attaching the new one. That way module state is preserved.
+ */
+ TAILQ_FOREACH(am1, &filter_list, am_list) {
+ found = 0;
+ TAILQ_FOREACH(am2, list, am_list) {
+ if (strcmp(am1->am_modulename, am2->am_modulename)
+ == 0) {
+ found = 1;
+ break;
+ }
+ }
+ if (!found)
+ continue;
+
+ /*
+ * Swap the arguments.
+ */
+ argc_tmp = am1->am_argc;
+ argv_tmp = am1->am_argv;
+ am1->am_argc = am2->am_argc;
+ am1->am_argv = am2->am_argv;
+ am2->am_argc = argc_tmp;
+ am2->am_argv = argv_tmp;
+
+ /*
+ * The reinit is a bit tricky: if reinit fails, we actually
+ * remove the old entry and detach that, as we don't allow
+ * running modules to be out of sync with the configuration
+ * file.
+ */
+ warnx("reiniting module %s", am1->am_modulename);
+ if (auditfilter_module_reinit(am1) != 0) {
+ warnx("reinit failed for module %s, detaching",
+ am1->am_modulename);
+ TAILQ_REMOVE(&filter_list, am1, am_list);
+ auditfilter_module_detach(am1);
+ auditfilter_module_free(am1);
+ }
+
+ /*
+ * Free the entry from the new list, which will discard the
+ * old arguments. No need to detach, as it was never
+ * attached in the first place.
+ */
+ TAILQ_REMOVE(list, am2, am_list);
+ auditfilter_module_free(am2);
+ }
+
+ /*
+ * Finally, attach any new entries that don't appear in the old
+ * configuration, and if they attach successfully, move them to the
+ * real configuration list.
+ */
+ TAILQ_FOREACH(am1, list, am_list) {
+ found = 0;
+ TAILQ_FOREACH(am2, &filter_list, am_list) {
+ if (strcmp(am1->am_modulename, am2->am_modulename)
+ == 0) {
+ found = 1;
+ break;
+ }
+ }
+ if (found)
+ continue;
+ /*
+ * Attach the entry. If it succeeds, add to filter_list,
+ * otherwise, free. No need to detach if attach failed.
+ */
+ warnx("attaching module %s", am1->am_modulename);
+ TAILQ_REMOVE(list, am1, am_list);
+ if (auditfilter_module_attach(am1) != 0) {
+ warnx("attaching module %s failed",
+ am1->am_modulename);
+ auditfilter_module_free(am1);
+ } else
+ TAILQ_INSERT_HEAD(&filter_list, am1, am_list);
+ }
+
+ if (TAILQ_FIRST(list) != NULL)
+ warnx("auditfilterd_conf_apply: new list not empty\n");
+}
+
+/*
+ * Read the new configuration file into a local list. If the configuration
+ * file is parsed OK, then apply the changes.
+ */
+int
+auditfilterd_conf(const char *filename, FILE *fp)
+{
+ struct auditfilter_module_list list;
+
+ TAILQ_INIT(&list);
+ if (auditfilterd_conf_read(filename, fp, &list) < 0)
+ return (-1);
+
+ auditfilterd_conf_apply(&list);
+
+ return (0);
+}
+
+/*
+ * Detach and free all active filter modules for daemon shutdown.
+ */
+void
+auditfilterd_conf_shutdown(void)
+{
+
+ auditfilter_module_list_detach(&filter_list);
+ auditfilter_module_list_free(&filter_list);
+}
+
+/*
+ * APIs to allow modules to query and set their per-instance cookie.
+ */
+void
+audit_filter_getcookie(void *instance, void **cookie)
+{
+ struct auditfilter_module *am;
+
+ am = (struct auditfilter_module *)instance;
+ *cookie = am->am_cookie;
+}
+
+void
+audit_filter_setcookie(void *instance, void *cookie)
+{
+ struct auditfilter_module *am;
+
+ am = (struct auditfilter_module *)instance;
+ am->am_cookie = cookie;
+}
Deleted: vendor/openbsm/1.2_alpha4/bin/auditreduce/Makefile.am
===================================================================
--- vendor/openbsm/dist/bin/auditreduce/Makefile.am 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/bin/auditreduce/Makefile.am 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,10 +0,0 @@
-#
-# $P4: //depot/projects/trustedbsd/openbsm/bin/auditreduce/Makefile.am#1 $
-#
-
-INCLUDES = -I$(top_srcdir)
-
-sbin_PROGRAMS = auditreduce
-auditreduce_SOURCES = auditreduce.c
-auditreduce_LDADD = $(top_builddir)/libbsm/libbsm.la
-man1_MANS = auditreduce.1
Copied: vendor/openbsm/1.2_alpha4/bin/auditreduce/Makefile.am (from rev 11163, vendor/openbsm/dist/bin/auditreduce/Makefile.am)
===================================================================
--- vendor/openbsm/1.2_alpha4/bin/auditreduce/Makefile.am (rev 0)
+++ vendor/openbsm/1.2_alpha4/bin/auditreduce/Makefile.am 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,10 @@
+if USE_NATIVE_INCLUDES
+INCLUDES = -I$(top_builddir) -I$(top_srcdir)
+else
+INCLUDES = -I$(top_builddir) -I$(top_srcdir) -I$(top_srcdir)/sys
+endif
+
+sbin_PROGRAMS = auditreduce
+auditreduce_SOURCES = auditreduce.c
+auditreduce_LDADD = $(top_builddir)/libbsm/libbsm.la
+man1_MANS = auditreduce.1
Deleted: vendor/openbsm/1.2_alpha4/bin/auditreduce/Makefile.in
===================================================================
--- vendor/openbsm/dist/bin/auditreduce/Makefile.in 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/bin/auditreduce/Makefile.in 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,516 +0,0 @@
-# Makefile.in generated by automake 1.10 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
- at SET_MAKE@
-
-#
-# $P4: //depot/projects/trustedbsd/openbsm/bin/auditreduce/Makefile.in#4 $
-#
-
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-sbin_PROGRAMS = auditreduce$(EXEEXT)
-subdir = bin/auditreduce
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/config/config.h
-CONFIG_CLEAN_FILES =
-am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man1dir)"
-sbinPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
-PROGRAMS = $(sbin_PROGRAMS)
-am_auditreduce_OBJECTS = auditreduce.$(OBJEXT)
-auditreduce_OBJECTS = $(am_auditreduce_OBJECTS)
-auditreduce_DEPENDENCIES = $(top_builddir)/libbsm/libbsm.la
-DEFAULT_INCLUDES = -I. -I$(top_builddir)/config at am__isrc@
-depcomp = $(SHELL) $(top_srcdir)/config/depcomp
-am__depfiles_maybe = depfiles
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
- $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
- --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
- $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
- --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
- $(LDFLAGS) -o $@
-SOURCES = $(auditreduce_SOURCES)
-DIST_SOURCES = $(auditreduce_SOURCES)
-man1dir = $(mandir)/man1
-NROFF = nroff
-MANS = $(man1_MANS)
-ETAGS = etags
-CTAGS = ctags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AMTAR = @AMTAR@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO = @ECHO@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-F77 = @F77@
-FFLAGS = @FFLAGS@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-VERSION = @VERSION@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-INCLUDES = -I$(top_srcdir)
-auditreduce_SOURCES = auditreduce.c
-auditreduce_LDADD = $(top_builddir)/libbsm/libbsm.la
-man1_MANS = auditreduce.1
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .c .lo .o .obj
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
- && exit 0; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign bin/auditreduce/Makefile'; \
- cd $(top_srcdir) && \
- $(AUTOMAKE) --foreign bin/auditreduce/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-install-sbinPROGRAMS: $(sbin_PROGRAMS)
- @$(NORMAL_INSTALL)
- test -z "$(sbindir)" || $(MKDIR_P) "$(DESTDIR)$(sbindir)"
- @list='$(sbin_PROGRAMS)'; for p in $$list; do \
- p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
- if test -f $$p \
- || test -f $$p1 \
- ; then \
- f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
- echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(sbinPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(sbindir)/$$f'"; \
- $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(sbinPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(sbindir)/$$f" || exit 1; \
- else :; fi; \
- done
-
-uninstall-sbinPROGRAMS:
- @$(NORMAL_UNINSTALL)
- @list='$(sbin_PROGRAMS)'; for p in $$list; do \
- f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
- echo " rm -f '$(DESTDIR)$(sbindir)/$$f'"; \
- rm -f "$(DESTDIR)$(sbindir)/$$f"; \
- done
-
-clean-sbinPROGRAMS:
- @list='$(sbin_PROGRAMS)'; for p in $$list; do \
- f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
- echo " rm -f $$p $$f"; \
- rm -f $$p $$f ; \
- done
-auditreduce$(EXEEXT): $(auditreduce_OBJECTS) $(auditreduce_DEPENDENCIES)
- @rm -f auditreduce$(EXEEXT)
- $(LINK) $(auditreduce_OBJECTS) $(auditreduce_LDADD) $(LIBS)
-
-mostlyclean-compile:
- -rm -f *.$(OBJEXT)
-
-distclean-compile:
- -rm -f *.tab.c
-
- at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/auditreduce.Po at am__quote@
-
-.c.o:
- at am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
- at am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
- at AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
- at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
- at am__fastdepCC_FALSE@ $(COMPILE) -c $<
-
-.c.obj:
- at am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
- at am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
- at AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
- at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
- at am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
-
-.c.lo:
- at am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
- at am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
- at AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
- at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
- at am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $<
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-install-man1: $(man1_MANS) $(man_MANS)
- @$(NORMAL_INSTALL)
- test -z "$(man1dir)" || $(MKDIR_P) "$(DESTDIR)$(man1dir)"
- @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
- l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
- for i in $$l2; do \
- case "$$i" in \
- *.1*) list="$$list $$i" ;; \
- esac; \
- done; \
- for i in $$list; do \
- if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
- else file=$$i; fi; \
- ext=`echo $$i | sed -e 's/^.*\\.//'`; \
- case "$$ext" in \
- 1*) ;; \
- *) ext='1' ;; \
- esac; \
- inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
- inst=`echo $$inst | sed -e 's/^.*\///'`; \
- inst=`echo $$inst | sed '$(transform)'`.$$ext; \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst"; \
- done
-uninstall-man1:
- @$(NORMAL_UNINSTALL)
- @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
- l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
- for i in $$l2; do \
- case "$$i" in \
- *.1*) list="$$list $$i" ;; \
- esac; \
- done; \
- for i in $$list; do \
- ext=`echo $$i | sed -e 's/^.*\\.//'`; \
- case "$$ext" in \
- 1*) ;; \
- *) ext='1' ;; \
- esac; \
- inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
- inst=`echo $$inst | sed -e 's/^.*\///'`; \
- inst=`echo $$inst | sed '$(transform)'`.$$ext; \
- echo " rm -f '$(DESTDIR)$(man1dir)/$$inst'"; \
- rm -f "$(DESTDIR)$(man1dir)/$$inst"; \
- done
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- mkid -fID $$unique
-tags: TAGS
-
-TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
- test -n "$$unique" || unique=$$empty_fix; \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$tags $$unique; \
- fi
-ctags: CTAGS
-CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(CTAGS_ARGS)$$tags$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$tags $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && cd $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) $$here
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
- fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
- else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(PROGRAMS) $(MANS)
-installdirs:
- for dir in "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man1dir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic clean-libtool clean-sbinPROGRAMS \
- mostlyclean-am
-
-distclean: distclean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
- distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-info: info-am
-
-info-am:
-
-install-data-am: install-man
-
-install-dvi: install-dvi-am
-
-install-exec-am: install-sbinPROGRAMS
-
-install-html: install-html-am
-
-install-info: install-info-am
-
-install-man: install-man1
-
-install-pdf: install-pdf-am
-
-install-ps: install-ps-am
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic \
- mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-man uninstall-sbinPROGRAMS
-
-uninstall-man: uninstall-man1
-
-.MAKE: install-am install-strip
-
-.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
- clean-libtool clean-sbinPROGRAMS ctags distclean \
- distclean-compile distclean-generic distclean-libtool \
- distclean-tags distdir dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-man1 install-pdf install-pdf-am install-ps \
- install-ps-am install-sbinPROGRAMS install-strip installcheck \
- installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-compile \
- mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
- tags uninstall uninstall-am uninstall-man uninstall-man1 \
- uninstall-sbinPROGRAMS
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
Copied: vendor/openbsm/1.2_alpha4/bin/auditreduce/Makefile.in (from rev 11163, vendor/openbsm/dist/bin/auditreduce/Makefile.in)
===================================================================
--- vendor/openbsm/1.2_alpha4/bin/auditreduce/Makefile.in (rev 0)
+++ vendor/openbsm/1.2_alpha4/bin/auditreduce/Makefile.in 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,647 @@
+# Makefile.in generated by automake 1.12.2 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2012 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+ at SET_MAKE@
+
+VPATH = @srcdir@
+am__make_dryrun = \
+ { \
+ am__dry=no; \
+ case $$MAKEFLAGS in \
+ *\\[\ \ ]*) \
+ echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
+ | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+ *) \
+ for am__flg in $$MAKEFLAGS; do \
+ case $$am__flg in \
+ *=*|--*) ;; \
+ *n*) am__dry=yes; break;; \
+ esac; \
+ done;; \
+ esac; \
+ test $$am__dry = yes; \
+ }
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+sbin_PROGRAMS = auditreduce$(EXEEXT)
+subdir = bin/auditreduce
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
+ $(top_srcdir)/config/depcomp
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man1dir)"
+PROGRAMS = $(sbin_PROGRAMS)
+am_auditreduce_OBJECTS = auditreduce.$(OBJEXT)
+auditreduce_OBJECTS = $(am_auditreduce_OBJECTS)
+auditreduce_DEPENDENCIES = $(top_builddir)/libbsm/libbsm.la
+DEFAULT_INCLUDES = -I. at am__isrc@ -I$(top_builddir)/config
+depcomp = $(SHELL) $(top_srcdir)/config/depcomp
+am__depfiles_maybe = depfiles
+am__mv = mv -f
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+ --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+ --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
+ $(LDFLAGS) -o $@
+SOURCES = $(auditreduce_SOURCES)
+DIST_SOURCES = $(auditreduce_SOURCES)
+am__can_run_installinfo = \
+ case $$AM_UPDATE_INFO_DIR in \
+ n|no|NO) false;; \
+ *) (install-info --version) >/dev/null 2>&1;; \
+ esac
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+ *) f=$$p;; \
+ esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+ if (++n[$$2] == $(am__install_max)) \
+ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+ END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+ test -z "$$files" \
+ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+ $(am__cd) "$$dir" && rm -f $$files; }; \
+ }
+man1dir = $(mandir)/man1
+NROFF = nroff
+MANS = $(man1_MANS)
+ETAGS = etags
+CTAGS = ctags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LEX = @LEX@
+LEXLIB = @LEXLIB@
+LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MIG = @MIG@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+VERSION = @VERSION@
+YACC = @YACC@
+YFLAGS = @YFLAGS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+ at USE_NATIVE_INCLUDES_FALSE@INCLUDES = -I$(top_builddir) -I$(top_srcdir) -I$(top_srcdir)/sys
+ at USE_NATIVE_INCLUDES_TRUE@INCLUDES = -I$(top_builddir) -I$(top_srcdir)
+auditreduce_SOURCES = auditreduce.c
+auditreduce_LDADD = $(top_builddir)/libbsm/libbsm.la
+man1_MANS = auditreduce.1
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .lo .o .obj
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+ && { if test -f $@; then exit 0; else break; fi; }; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign bin/auditreduce/Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --foreign bin/auditreduce/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+install-sbinPROGRAMS: $(sbin_PROGRAMS)
+ @$(NORMAL_INSTALL)
+ @list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \
+ if test -n "$$list"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
+ fi; \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed 's/$(EXEEXT)$$//' | \
+ while read p p1; do if test -f $$p || test -f $$p1; \
+ then echo "$$p"; echo "$$p"; else :; fi; \
+ done | \
+ sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
+ -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+ sed 'N;N;N;s,\n, ,g' | \
+ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+ if ($$2 == $$4) files[d] = files[d] " " $$1; \
+ else { print "f", $$3 "/" $$4, $$1; } } \
+ END { for (d in files) print "f", d, files[d] }' | \
+ while read type dir files; do \
+ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+ test -z "$$files" || { \
+ echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
+ $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
+ } \
+ ; done
+
+uninstall-sbinPROGRAMS:
+ @$(NORMAL_UNINSTALL)
+ @list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \
+ files=`for p in $$list; do echo "$$p"; done | \
+ sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+ -e 's/$$/$(EXEEXT)/' `; \
+ test -n "$$list" || exit 0; \
+ echo " ( cd '$(DESTDIR)$(sbindir)' && rm -f" $$files ")"; \
+ cd "$(DESTDIR)$(sbindir)" && rm -f $$files
+
+clean-sbinPROGRAMS:
+ @list='$(sbin_PROGRAMS)'; test -n "$$list" || exit 0; \
+ echo " rm -f" $$list; \
+ rm -f $$list || exit $$?; \
+ test -n "$(EXEEXT)" || exit 0; \
+ list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+ echo " rm -f" $$list; \
+ rm -f $$list
+auditreduce$(EXEEXT): $(auditreduce_OBJECTS) $(auditreduce_DEPENDENCIES) $(EXTRA_auditreduce_DEPENDENCIES)
+ @rm -f auditreduce$(EXEEXT)
+ $(LINK) $(auditreduce_OBJECTS) $(auditreduce_LDADD) $(LIBS)
+
+mostlyclean-compile:
+ -rm -f *.$(OBJEXT)
+
+distclean-compile:
+ -rm -f *.tab.c
+
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/auditreduce.Po at am__quote@
+
+.c.o:
+ at am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+ at am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ at am__fastdepCC_FALSE@ $(COMPILE) -c $<
+
+.c.obj:
+ at am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+ at am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ at am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
+
+.c.lo:
+ at am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+ at am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ at am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $<
+
+mostlyclean-libtool:
+ -rm -f *.lo
+
+clean-libtool:
+ -rm -rf .libs _libs
+install-man1: $(man1_MANS)
+ @$(NORMAL_INSTALL)
+ @list1='$(man1_MANS)'; \
+ list2=''; \
+ test -n "$(man1dir)" \
+ && test -n "`echo $$list1$$list2`" \
+ || exit 0; \
+ echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
+ { for i in $$list1; do echo "$$i"; done; \
+ if test -n "$$list2"; then \
+ for i in $$list2; do echo "$$i"; done \
+ | sed -n '/\.1[a-z]*$$/p'; \
+ fi; \
+ } | while read p; do \
+ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; echo "$$p"; \
+ done | \
+ sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+ sed 'N;N;s,\n, ,g' | { \
+ list=; while read file base inst; do \
+ if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
+ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
+ fi; \
+ done; \
+ for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+ while read files; do \
+ test -z "$$files" || { \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
+ done; }
+
+uninstall-man1:
+ @$(NORMAL_UNINSTALL)
+ @list='$(man1_MANS)'; test -n "$(man1dir)" || exit 0; \
+ files=`{ for i in $$list; do echo "$$i"; done; \
+ } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+ dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ set x; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ shift; \
+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ if test $$# -gt 0; then \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ "$$@" $$unique; \
+ else \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$unique; \
+ fi; \
+ fi
+ctags: CTAGS
+CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ test -z "$(CTAGS_ARGS)$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && $(am__cd) $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) "$$here"
+
+cscopelist: $(HEADERS) $(SOURCES) $(LISP)
+ list='$(SOURCES) $(HEADERS) $(LISP)'; \
+ case "$(srcdir)" in \
+ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+ *) sdir=$(subdir)/$(srcdir) ;; \
+ esac; \
+ for i in $$list; do \
+ if test -f "$$i"; then \
+ echo "$(subdir)/$$i"; \
+ else \
+ echo "$$sdir/$$i"; \
+ fi; \
+ done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+ @list='$(MANS)'; if test -n "$$list"; then \
+ list=`for p in $$list; do \
+ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+ if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
+ if test -n "$$list" && \
+ grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
+ echo "error: found man pages containing the 'missing help2man' replacement text:" >&2; \
+ grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \
+ echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \
+ echo " typically 'make maintainer-clean' will remove them" >&2; \
+ exit 1; \
+ else :; fi; \
+ else :; fi
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+ else \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+check: check-am
+all-am: Makefile $(PROGRAMS) $(MANS)
+installdirs:
+ for dir in "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man1dir)"; do \
+ test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+ done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+ if test -z '$(STRIP)'; then \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ install; \
+ else \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+ fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libtool clean-sbinPROGRAMS \
+ mostlyclean-am
+
+distclean: distclean-am
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+ distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-man
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am: install-sbinPROGRAMS
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man: install-man1
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+ mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-man uninstall-sbinPROGRAMS
+
+uninstall-man: uninstall-man1
+
+.MAKE: install-am install-strip
+
+.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
+ clean-libtool clean-sbinPROGRAMS cscopelist ctags distclean \
+ distclean-compile distclean-generic distclean-libtool \
+ distclean-tags distdir dvi dvi-am html html-am info info-am \
+ install install-am install-data install-data-am install-dvi \
+ install-dvi-am install-exec install-exec-am install-html \
+ install-html-am install-info install-info-am install-man \
+ install-man1 install-pdf install-pdf-am install-ps \
+ install-ps-am install-sbinPROGRAMS install-strip installcheck \
+ installcheck-am installdirs maintainer-clean \
+ maintainer-clean-generic mostlyclean mostlyclean-compile \
+ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+ tags uninstall uninstall-am uninstall-man uninstall-man1 \
+ uninstall-sbinPROGRAMS
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
Deleted: vendor/openbsm/1.2_alpha4/bin/auditreduce/auditreduce.1
===================================================================
--- vendor/openbsm/dist/bin/auditreduce/auditreduce.1 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/bin/auditreduce/auditreduce.1 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,193 +0,0 @@
-.\" Copyright (c) 2004 Apple Computer, Inc.
-.\" All rights reserved.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\" notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\" notice, this list of conditions and the following disclaimer in the
-.\" documentation and/or other materials provided with the distribution.
-.\" 3. Neither the name of Apple Computer, Inc. ("Apple") nor the names of
-.\" its contributors may be used to endorse or promote products derived
-.\" from this software without specific prior written permission.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND
-.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-.\" ARE DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR
-.\" ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-.\" STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
-.\" IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-.\" POSSIBILITY OF SUCH DAMAGE.
-.\"
-.\" $P4: //depot/projects/trustedbsd/openbsm/bin/auditreduce/auditreduce.1#14 $
-.\"
-.Dd January 24, 2004
-.Dt AUDITREDUCE 1
-.Os
-.Sh NAME
-.Nm auditreduce
-.Nd "select records from audit trail files"
-.Sh SYNOPSIS
-.Nm
-.Op Fl A
-.Op Fl a Ar YYYYMMDD Ns Op Ar HH Ns Op Ar MM Ns Op Ar SS
-.Op Fl b Ar YYYYMMDD Ns Op Ar HH Ns Op Ar MM Ns Op Ar SS
-.Op Fl c Ar flags
-.Op Fl d Ar YYYYMMDD
-.Op Fl e Ar euid
-.Op Fl f Ar egid
-.Op Fl g Ar rgid
-.Op Fl j Ar id
-.Op Fl m Ar event
-.Op Fl o Ar object Ns = Ns Ar value
-.Op Fl r Ar ruid
-.Op Fl u Ar auid
-.Op Ar
-.Sh DESCRIPTION
-The
-.Nm
-utility selects records from the audit trail files based on the specified
-criteria.
-Matching audit records are printed to the standard output in
-their raw binary form.
-If no
-.Ar file
-argument is specified, the standard input is used
-by default.
-Use the
-.Xr praudit 1
-utility to print the selected audit records in human-readable form.
-.Pp
-The options are as follows:
-.Bl -tag -width indent
-.It Fl A
-Select all records.
-.It Fl a Ar YYYYMMDD Ns Op Ar HH Ns Op Ar MM Ns Op Ar SS
-Select records that occurred after or on the given datetime.
-.It Fl b Ar YYYYMMDD Ns Op Ar HH Ns Op Ar MM Ns Op Ar SS
-Select records that occurred before the given datetime.
-.It Fl c Ar flags
-Select records matching the given audit classes specified as a comma
-separated list of audit flags.
-See
-.Xr audit_control 5
-for a description of audit flags.
-.It Fl d Ar YYYYMMDD
-Select records that occurred on a given date.
-This option cannot be used with
-.Fl a
-or
-.Fl b .
-.It Fl e Ar euid
-Select records with the given effective user ID or name.
-.It Fl f Ar egid
-Select records with the given effective group ID or name.
-.It Fl g Ar rgid
-Select records with the given real group ID or name.
-.It Fl j Ar id
-Select records having a subject token with matching ID.
-.It Fl m Ar event
-Select records with the given event name or number.
-See
-.Xr audit_event 5
-for a description of audit event names and numbers.
-.It Fl o Ar object Ns = Ns Ar value
-.Bl -tag -width ".Cm msgqid"
-.It Cm file
-Select records containing path tokens, where the pathname matches
-one of the comma delimited extended regular expression contained in
-given specification.
-Regular expressions which are prefixed with a tilde
-.Pq Ql ~
-are excluded
-from the search results.
-These extended regular expressions are processed from left to right,
-and a path will either be selected or deslected based on the first match.
-.Pp
-Since commas are used to delimit the regular expressions, a backslash
-.Pq Ql \e
-character should be used to escape the comma if it is a part of the search
-pattern.
-.It Cm msgqid
-Select records containing the given message queue ID.
-.It Cm pid
-Select records containing the given process ID.
-.It Cm semid
-Select records containing the given semaphore ID.
-.It Cm shmid
-Select records containing the given shared memory ID.
-.El
-.It Fl r Ar ruid
-Select records with the given real user ID or name.
-.It Fl u Ar auid
-Select records with the given audit ID.
-.El
-.Sh EXAMPLES
-To select all records associated with effective user ID root from the audit
-log
-.Pa /var/audit/20031016184719.20031017122634 :
-.Bd -literal -offset indent
-auditreduce -e root \e
- /var/audit/20031016184719.20031017122634
-.Ed
-.Pp
-To select all
-.Xr setlogin 2
-events from that log:
-.Bd -literal -offset indent
-auditreduce -m AUE_SETLOGIN \e
- /var/audit/20031016184719.20031017122634
-.Ed
-.Pp
-Output from the above command lines will typically be piped to a new trail
-file, or via standard output to the
-.Xr praudit 1
-command.
-.Pp
-Select all records containing a path token where the pathname contains
-.Pa /etc/master.passwd :
-.Bd -literal -offset indent
-auditreduce -o file="/etc/master.passwd" \e
- /var/audit/20031016184719.20031017122634
-.Ed
-.Pp
-Select all records containing path tokens, where the pathname is a TTY
-device:
-.Bd -literal -offset indent
-auditreduce -o file="/dev/tty[a-zA-Z][0-9]+" \e
- /var/audit/20031016184719.20031017122634
-.Ed
-.Pp
-Select all records containing path tokens, where the pathname is a TTY
-except for
-.Pa /dev/ttyp2 :
-.Bd -literal -offset indent
-auditreduce -o file="~/dev/ttyp2,/dev/tty[a-zA-Z][0-9]+" \e
- /var/audit/20031016184719.20031017122634
-.Ed
-.Sh SEE ALSO
-.Xr praudit 1 ,
-.Xr audit_control 5 ,
-.Xr audit_event 5
-.Sh HISTORY
-The OpenBSM implementation was created by McAfee Research, the security
-division of McAfee Inc., under contract to Apple Computer Inc.\& in 2004.
-It was subsequently adopted by the TrustedBSD Project as the foundation for
-the OpenBSM distribution.
-.Sh AUTHORS
-.An -nosplit
-This software was created by McAfee Research, the security research division
-of McAfee, Inc., under contract to Apple Computer Inc.
-Additional authors include
-.An Wayne Salamon ,
-.An Robert Watson ,
-and SPARTA Inc.
-.Pp
-The Basic Security Module (BSM) interface to audit records and audit event
-stream format were defined by Sun Microsystems.
Copied: vendor/openbsm/1.2_alpha4/bin/auditreduce/auditreduce.1 (from rev 11163, vendor/openbsm/dist/bin/auditreduce/auditreduce.1)
===================================================================
--- vendor/openbsm/1.2_alpha4/bin/auditreduce/auditreduce.1 (rev 0)
+++ vendor/openbsm/1.2_alpha4/bin/auditreduce/auditreduce.1 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,195 @@
+.\" Copyright (c) 2004 Apple Inc.
+.\" All rights reserved.
+.\"
+.\" Redistribution and use in source and binary forms, with or without
+.\" modification, are permitted provided that the following conditions
+.\" are met:
+.\" 1. Redistributions of source code must retain the above copyright
+.\" notice, this list of conditions and the following disclaimer.
+.\" 2. Redistributions in binary form must reproduce the above copyright
+.\" notice, this list of conditions and the following disclaimer in the
+.\" documentation and/or other materials provided with the distribution.
+.\" 3. Neither the name of Apple Inc. ("Apple") nor the names of
+.\" its contributors may be used to endorse or promote products derived
+.\" from this software without specific prior written permission.
+.\"
+.\" THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND
+.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+.\" ARE DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR
+.\" ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+.\" STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+.\" IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+.\" POSSIBILITY OF SUCH DAMAGE.
+.\"
+.Dd January 24, 2004
+.Dt AUDITREDUCE 1
+.Os
+.Sh NAME
+.Nm auditreduce
+.Nd "select records from audit trail files"
+.Sh SYNOPSIS
+.Nm
+.Op Fl A
+.Op Fl a Ar YYYYMMDD Ns Op Ar HH Ns Op Ar MM Ns Op Ar SS
+.Op Fl b Ar YYYYMMDD Ns Op Ar HH Ns Op Ar MM Ns Op Ar SS
+.Op Fl c Ar flags
+.Op Fl d Ar YYYYMMDD
+.Op Fl e Ar euid
+.Op Fl f Ar egid
+.Op Fl g Ar rgid
+.Op Fl j Ar id
+.Op Fl m Ar event
+.Op Fl o Ar object Ns = Ns Ar value
+.Op Fl r Ar ruid
+.Op Fl u Ar auid
+.Op Fl v
+.Op Ar
+.Sh DESCRIPTION
+The
+.Nm
+utility selects records from the audit trail files based on the specified
+criteria.
+Matching audit records are printed to the standard output in
+their raw binary form.
+If no
+.Ar file
+argument is specified, the standard input is used
+by default.
+Use the
+.Xr praudit 1
+utility to print the selected audit records in human-readable form.
+.Pp
+The options are as follows:
+.Bl -tag -width indent
+.It Fl A
+Select all records.
+.It Fl a Ar YYYYMMDD Ns Op Ar HH Ns Op Ar MM Ns Op Ar SS
+Select records that occurred after or on the given datetime.
+.It Fl b Ar YYYYMMDD Ns Op Ar HH Ns Op Ar MM Ns Op Ar SS
+Select records that occurred before the given datetime.
+.It Fl c Ar flags
+Select records matching the given audit classes specified as a comma
+separated list of audit flags.
+See
+.Xr audit_control 5
+for a description of audit flags.
+.It Fl d Ar YYYYMMDD
+Select records that occurred on a given date.
+This option cannot be used with
+.Fl a
+or
+.Fl b .
+.It Fl e Ar euid
+Select records with the given effective user ID or name.
+.It Fl f Ar egid
+Select records with the given effective group ID or name.
+.It Fl g Ar rgid
+Select records with the given real group ID or name.
+.It Fl j Ar id
+Select records having a subject token with matching ID, where ID is a process ID.
+.It Fl m Ar event
+Select records with the given event name or number. This option can
+be used more then once to select records of multiple event types.
+See
+.Xr audit_event 5
+for a description of audit event names and numbers.
+.It Fl o Ar object Ns = Ns Ar value
+.Bl -tag -width ".Cm msgqid"
+.It Cm file
+Select records containing path tokens, where the pathname matches
+one of the comma delimited extended regular expression contained in
+given specification.
+Regular expressions which are prefixed with a tilde
+.Pq Ql ~
+are excluded
+from the search results.
+These extended regular expressions are processed from left to right,
+and a path will either be selected or deslected based on the first match.
+.Pp
+Since commas are used to delimit the regular expressions, a backslash
+.Pq Ql \e
+character should be used to escape the comma if it is a part of the search
+pattern.
+.It Cm msgqid
+Select records containing the given message queue ID.
+.It Cm pid
+Select records containing the given process ID.
+.It Cm semid
+Select records containing the given semaphore ID.
+.It Cm shmid
+Select records containing the given shared memory ID.
+.El
+.It Fl r Ar ruid
+Select records with the given real user ID or name.
+.It Fl u Ar auid
+Select records with the given audit ID.
+.It Fl v
+Invert sense of matching, to select records that do not match.
+.El
+.Sh EXAMPLES
+To select all records associated with effective user ID root from the audit
+log
+.Pa /var/audit/20031016184719.20031017122634 :
+.Bd -literal -offset indent
+auditreduce -e root \e
+ /var/audit/20031016184719.20031017122634
+.Ed
+.Pp
+To select all
+.Xr setlogin 2
+events from that log:
+.Bd -literal -offset indent
+auditreduce -m AUE_SETLOGIN \e
+ /var/audit/20031016184719.20031017122634
+.Ed
+.Pp
+Output from the above command lines will typically be piped to a new trail
+file, or via standard output to the
+.Xr praudit 1
+command.
+.Pp
+Select all records containing a path token where the pathname contains
+.Pa /etc/master.passwd :
+.Bd -literal -offset indent
+auditreduce -o file="/etc/master.passwd" \e
+ /var/audit/20031016184719.20031017122634
+.Ed
+.Pp
+Select all records containing path tokens, where the pathname is a TTY
+device:
+.Bd -literal -offset indent
+auditreduce -o file="/dev/tty[a-zA-Z][0-9]+" \e
+ /var/audit/20031016184719.20031017122634
+.Ed
+.Pp
+Select all records containing path tokens, where the pathname is a TTY
+except for
+.Pa /dev/ttyp2 :
+.Bd -literal -offset indent
+auditreduce -o file="~/dev/ttyp2,/dev/tty[a-zA-Z][0-9]+" \e
+ /var/audit/20031016184719.20031017122634
+.Ed
+.Sh SEE ALSO
+.Xr praudit 1 ,
+.Xr audit_control 5 ,
+.Xr audit_event 5
+.Sh HISTORY
+The OpenBSM implementation was created by McAfee Research, the security
+division of McAfee Inc., under contract to Apple Computer Inc.\& in 2004.
+It was subsequently adopted by the TrustedBSD Project as the foundation for
+the OpenBSM distribution.
+.Sh AUTHORS
+.An -nosplit
+This software was created by McAfee Research, the security research division
+of McAfee, Inc., under contract to Apple Computer Inc.
+Additional authors include
+.An Wayne Salamon ,
+.An Robert Watson ,
+and SPARTA Inc.
+.Pp
+The Basic Security Module (BSM) interface to audit records and audit event
+stream format were defined by Sun Microsystems.
Deleted: vendor/openbsm/1.2_alpha4/bin/auditreduce/auditreduce.c
===================================================================
--- vendor/openbsm/dist/bin/auditreduce/auditreduce.c 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/bin/auditreduce/auditreduce.c 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,788 +0,0 @@
-/*
- * Copyright (c) 2004 Apple Computer, Inc.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. Neither the name of Apple Computer, Inc. ("Apple") nor the names of
- * its contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR
- * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
- * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- * $P4: //depot/projects/trustedbsd/openbsm/bin/auditreduce/auditreduce.c#20 $
- */
-
-/*
- * Tool used to merge and select audit records from audit trail files
- */
-
-/*
- * XXX Currently we do not support merging of records from multiple
- * XXX audit trail files
- * XXX We assume that records are sorted chronologically - both wrt to
- * XXX the records present within the file and between the files themselves
- */
-
-#include <config/config.h>
-#ifdef HAVE_FULL_QUEUE_H
-#include <sys/queue.h>
-#else
-#include <compat/queue.h>
-#endif
-
-#include <bsm/libbsm.h>
-
-#include <err.h>
-#include <grp.h>
-#include <pwd.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <sysexits.h>
-#include <string.h>
-#include <time.h>
-#include <unistd.h>
-#include <regex.h>
-#include <errno.h>
-
-#include "auditreduce.h"
-
-static TAILQ_HEAD(tailhead, re_entry) re_head =
- TAILQ_HEAD_INITIALIZER(re_head);
-
-extern char *optarg;
-extern int optind, optopt, opterr,optreset;
-
-static au_mask_t maskp; /* Class. */
-static time_t p_atime; /* Created after this time. */
-static time_t p_btime; /* Created before this time. */
-static uint16_t p_evtype; /* Event that we are searching for. */
-static int p_auid; /* Audit id. */
-static int p_euid; /* Effective user id. */
-static int p_egid; /* Effective group id. */
-static int p_rgid; /* Real group id. */
-static int p_ruid; /* Real user id. */
-static int p_subid; /* Subject id. */
-
-/*
- * Following are the objects (-o option) that we can select upon.
- */
-static char *p_fileobj = NULL;
-static char *p_msgqobj = NULL;
-static char *p_pidobj = NULL;
-static char *p_semobj = NULL;
-static char *p_shmobj = NULL;
-static char *p_sockobj = NULL;
-
-static uint32_t opttochk = 0;
-
-static void
-parse_regexp(char *re_string)
-{
- char *orig, *copy, re_error[64];
- struct re_entry *rep;
- int error, nstrs, i, len;
-
- copy = strdup(re_string);
- orig = copy;
- len = strlen(copy);
- for (nstrs = 0, i = 0; i < len; i++) {
- if (copy[i] == ',' && i > 0) {
- if (copy[i - 1] == '\\')
- strcpy(©[i - 1], ©[i]);
- else {
- nstrs++;
- copy[i] = '\0';
- }
- }
- }
- TAILQ_INIT(&re_head);
- for (i = 0; i < nstrs + 1; i++) {
- rep = calloc(1, sizeof(*rep));
- if (rep == NULL) {
- (void) fprintf(stderr, "calloc: %s\n",
- strerror(errno));
- exit(1);
- }
- if (*copy == '~') {
- copy++;
- rep->re_negate = 1;
- }
- rep->re_pattern = strdup(copy);
- error = regcomp(&rep->re_regexp, rep->re_pattern,
- REG_EXTENDED | REG_NOSUB);
- if (error != 0) {
- regerror(error, &rep->re_regexp, re_error, 64);
- (void) fprintf(stderr, "regcomp: %s\n", re_error);
- exit(1);
- }
- TAILQ_INSERT_TAIL(&re_head, rep, re_glue);
- len = strlen(copy);
- copy += len + 1;
- }
- free(orig);
-}
-
-static void
-usage(const char *msg)
-{
- fprintf(stderr, "%s\n", msg);
- fprintf(stderr, "Usage: auditreduce [options] [file ...]\n");
- fprintf(stderr, "\tOptions are : \n");
- fprintf(stderr, "\t-A : all records\n");
- fprintf(stderr, "\t-a YYYYMMDD[HH[[MM[SS]]] : after date\n");
- fprintf(stderr, "\t-b YYYYMMDD[HH[[MM[SS]]] : before date\n");
- fprintf(stderr, "\t-c <flags> : matching class\n");
- fprintf(stderr, "\t-d YYYYMMDD : on date\n");
- fprintf(stderr, "\t-e <uid|name> : effective user\n");
- fprintf(stderr, "\t-f <gid|group> : effective group\n");
- fprintf(stderr, "\t-g <gid|group> : real group\n");
- fprintf(stderr, "\t-j <pid> : subject id \n");
- fprintf(stderr, "\t-m <evno|evname> : matching event\n");
- fprintf(stderr, "\t-o objecttype=objectvalue\n");
- fprintf(stderr, "\t\t file=<pathname>\n");
- fprintf(stderr, "\t\t msgqid=<ID>\n");
- fprintf(stderr, "\t\t pid=<ID>\n");
- fprintf(stderr, "\t\t semid=<ID>\n");
- fprintf(stderr, "\t\t shmid=<ID>\n");
- fprintf(stderr, "\t-r <uid|name> : real user\n");
- fprintf(stderr, "\t-u <uid|name> : audit user\n");
- exit(EX_USAGE);
-}
-
-/*
- * Check if the given auid matches the selection criteria.
- */
-static int
-select_auid(int au)
-{
-
- /* Check if we want to select on auid. */
- if (ISOPTSET(opttochk, OPT_u)) {
- if (au != p_auid)
- return (0);
- }
- return (1);
-}
-
-/*
- * Check if the given euid matches the selection criteria.
- */
-static int
-select_euid(int euser)
-{
-
- /* Check if we want to select on euid. */
- if (ISOPTSET(opttochk, OPT_e)) {
- if (euser != p_euid)
- return (0);
- }
- return (1);
-}
-
-/*
- * Check if the given egid matches the selection criteria.
- */
-static int
-select_egid(int egrp)
-{
-
- /* Check if we want to select on egid. */
- if (ISOPTSET(opttochk, OPT_f)) {
- if (egrp != p_egid)
- return (0);
- }
- return (1);
-}
-
-/*
- * Check if the given rgid matches the selection criteria.
- */
-static int
-select_rgid(int grp)
-{
-
- /* Check if we want to select on rgid. */
- if (ISOPTSET(opttochk, OPT_g)) {
- if (grp != p_rgid)
- return (0);
- }
- return (1);
-}
-
-/*
- * Check if the given ruid matches the selection criteria.
- */
-static int
-select_ruid(int user)
-{
-
- /* Check if we want to select on rgid. */
- if (ISOPTSET(opttochk, OPT_r)) {
- if (user != p_ruid)
- return (0);
- }
- return (1);
-}
-
-/*
- * Check if the given subject id (pid) matches the selection criteria.
- */
-static int
-select_subid(int subid)
-{
-
- /* Check if we want to select on subject uid. */
- if (ISOPTSET(opttochk, OPT_j)) {
- if (subid != p_subid)
- return (0);
- }
- return (1);
-}
-
-
-/*
- * Check if object's pid maches the given pid.
- */
-static int
-select_pidobj(uint32_t pid)
-{
-
- if (ISOPTSET(opttochk, OPT_op)) {
- if (pid != strtol(p_pidobj, (char **)NULL, 10))
- return (0);
- }
- return (1);
-}
-
-/*
- * Check if the given ipc object with the given type matches the selection
- * criteria.
- */
-static int
-select_ipcobj(u_char type, uint32_t id, uint32_t *optchkd)
-{
-
- if (type == AT_IPC_MSG) {
- SETOPT((*optchkd), OPT_om);
- if (ISOPTSET(opttochk, OPT_om)) {
- if (id != strtol(p_msgqobj, (char **)NULL, 10))
- return (0);
- }
- return (1);
- } else if (type == AT_IPC_SEM) {
- SETOPT((*optchkd), OPT_ose);
- if (ISOPTSET(opttochk, OPT_ose)) {
- if (id != strtol(p_semobj, (char **)NULL, 10))
- return (0);
- }
- return (1);
- } else if (type == AT_IPC_SHM) {
- SETOPT((*optchkd), OPT_osh);
- if (ISOPTSET(opttochk, OPT_osh)) {
- if (id != strtol(p_shmobj, (char **)NULL, 10))
- return (0);
- }
- return (1);
- }
-
- /* Unknown type -- filter if *any* ipc filtering is required. */
- if (ISOPTSET(opttochk, OPT_om) || ISOPTSET(opttochk, OPT_ose)
- || ISOPTSET(opttochk, OPT_osh))
- return (0);
-
- return (1);
-}
-
-
-/*
- * Check if the file name matches selection criteria.
- */
-static int
-select_filepath(char *path, uint32_t *optchkd)
-{
- struct re_entry *rep;
- int match;
-
- SETOPT((*optchkd), OPT_of);
- match = 1;
- if (ISOPTSET(opttochk, OPT_of)) {
- match = 0;
- TAILQ_FOREACH(rep, &re_head, re_glue) {
- if (regexec(&rep->re_regexp, path, 0, NULL,
- 0) != REG_NOMATCH)
- return (!rep->re_negate);
- }
- }
- return (match);
-}
-
-/*
- * Returns 1 if the following pass the selection rules:
- *
- * before-time,
- * after time,
- * date,
- * class,
- * event
- */
-static int
-select_hdr32(tokenstr_t tok, uint32_t *optchkd)
-{
-
- SETOPT((*optchkd), (OPT_A | OPT_a | OPT_b | OPT_c | OPT_m));
-
- /* The A option overrides a, b and d. */
- if (!ISOPTSET(opttochk, OPT_A)) {
- if (ISOPTSET(opttochk, OPT_a)) {
- if (difftime((time_t)tok.tt.hdr32.s, p_atime) < 0) {
- /* Record was created before p_atime. */
- return (0);
- }
- }
-
- if (ISOPTSET(opttochk, OPT_b)) {
- if (difftime(p_btime, (time_t)tok.tt.hdr32.s) < 0) {
- /* Record was created after p_btime. */
- return (0);
- }
- }
- }
-
- if (ISOPTSET(opttochk, OPT_c)) {
- /*
- * Check if the classes represented by the event matches
- * given class.
- */
- if (au_preselect(tok.tt.hdr32.e_type, &maskp, AU_PRS_BOTH,
- AU_PRS_USECACHE) != 1)
- return (0);
- }
-
- /* Check if event matches. */
- if (ISOPTSET(opttochk, OPT_m)) {
- if (tok.tt.hdr32.e_type != p_evtype)
- return (0);
- }
-
- return (1);
-}
-
-static int
-select_return32(tokenstr_t tok_ret32, tokenstr_t tok_hdr32, uint32_t *optchkd)
-{
- int sorf;
-
- SETOPT((*optchkd), (OPT_c));
- if (tok_ret32.tt.ret32.status == 0)
- sorf = AU_PRS_SUCCESS;
- else
- sorf = AU_PRS_FAILURE;
- if (ISOPTSET(opttochk, OPT_c)) {
- if (au_preselect(tok_hdr32.tt.hdr32.e_type, &maskp, sorf,
- AU_PRS_USECACHE) != 1)
- return (0);
- }
- return (1);
-}
-
-/*
- * Return 1 if checks for the the following succeed
- * auid,
- * euid,
- * egid,
- * rgid,
- * ruid,
- * process id
- */
-static int
-select_proc32(tokenstr_t tok, uint32_t *optchkd)
-{
-
- SETOPT((*optchkd), (OPT_u | OPT_e | OPT_f | OPT_g | OPT_r | OPT_op));
-
- if (!select_auid(tok.tt.proc32.auid))
- return (0);
- if (!select_euid(tok.tt.proc32.euid))
- return (0);
- if (!select_egid(tok.tt.proc32.egid))
- return (0);
- if (!select_rgid(tok.tt.proc32.rgid))
- return (0);
- if (!select_ruid(tok.tt.proc32.ruid))
- return (0);
- if (!select_pidobj(tok.tt.proc32.pid))
- return (0);
- return (1);
-}
-
-/*
- * Return 1 if checks for the the following succeed
- * auid,
- * euid,
- * egid,
- * rgid,
- * ruid,
- * subject id
- */
-static int
-select_subj32(tokenstr_t tok, uint32_t *optchkd)
-{
-
- SETOPT((*optchkd), (OPT_u | OPT_e | OPT_f | OPT_g | OPT_r | OPT_j));
-
- if (!select_auid(tok.tt.subj32.auid))
- return (0);
- if (!select_euid(tok.tt.subj32.euid))
- return (0);
- if (!select_egid(tok.tt.subj32.egid))
- return (0);
- if (!select_rgid(tok.tt.subj32.rgid))
- return (0);
- if (!select_ruid(tok.tt.subj32.ruid))
- return (0);
- if (!select_subid(tok.tt.subj32.pid))
- return (0);
- return (1);
-}
-
-/*
- * Read each record from the audit trail. Check if it is selected after
- * passing through each of the options
- */
-static int
-select_records(FILE *fp)
-{
- tokenstr_t tok_hdr32_copy;
- u_char *buf;
- tokenstr_t tok;
- int reclen;
- int bytesread;
- int selected;
- uint32_t optchkd;
-
- int err = 0;
- while ((reclen = au_read_rec(fp, &buf)) != -1) {
- optchkd = 0;
- bytesread = 0;
- selected = 1;
- while ((selected == 1) && (bytesread < reclen)) {
- if (-1 == au_fetch_tok(&tok, buf + bytesread,
- reclen - bytesread)) {
- /* Is this an incomplete record? */
- err = 1;
- break;
- }
-
- /*
- * For each token type we have have different
- * selection criteria.
- */
- switch(tok.id) {
- case AU_HEADER_32_TOKEN:
- selected = select_hdr32(tok,
- &optchkd);
- bcopy(&tok, &tok_hdr32_copy,
- sizeof(tok));
- break;
-
- case AU_PROCESS_32_TOKEN:
- selected = select_proc32(tok,
- &optchkd);
- break;
-
- case AU_SUBJECT_32_TOKEN:
- selected = select_subj32(tok,
- &optchkd);
- break;
-
- case AU_IPC_TOKEN:
- selected = select_ipcobj(
- tok.tt.ipc.type, tok.tt.ipc.id,
- &optchkd);
- break;
-
- case AU_FILE_TOKEN:
- selected = select_filepath(
- tok.tt.file.name, &optchkd);
- break;
-
- case AU_PATH_TOKEN:
- selected = select_filepath(
- tok.tt.path.path, &optchkd);
- break;
-
- case AU_RETURN_32_TOKEN:
- selected = select_return32(tok,
- tok_hdr32_copy, &optchkd);
- break;
-
- /*
- * The following tokens dont have any relevant
- * attributes that we can select upon.
- */
- case AU_TRAILER_TOKEN:
- case AU_ARG32_TOKEN:
- case AU_ATTR32_TOKEN:
- case AU_EXIT_TOKEN:
- case AU_NEWGROUPS_TOKEN:
- case AU_IN_ADDR_TOKEN:
- case AU_IP_TOKEN:
- case AU_IPCPERM_TOKEN:
- case AU_IPORT_TOKEN:
- case AU_OPAQUE_TOKEN:
- case AU_SEQ_TOKEN:
- case AU_TEXT_TOKEN:
- case AU_ARB_TOKEN:
- case AU_SOCK_TOKEN:
- default:
- break;
- }
- bytesread += tok.len;
- }
- if ((selected == 1) && (!err)) {
- /* Check if all the options were matched. */
- if (!(opttochk & ~optchkd)) {
- /* XXX Write this record to the output file. */
- /* default to stdout */
- fwrite(buf, 1, reclen, stdout);
- }
- }
- free(buf);
- }
- return (0);
-}
-
-/*
- * The -o option has the form object_type=object_value. Identify the object
- * components.
- */
-void
-parse_object_type(char *name, char *val)
-{
- if (val == NULL)
- return;
-
- if (!strcmp(name, FILEOBJ)) {
- p_fileobj = val;
- parse_regexp(val);
- SETOPT(opttochk, OPT_of);
- } else if (!strcmp(name, MSGQIDOBJ)) {
- p_msgqobj = val;
- SETOPT(opttochk, OPT_om);
- } else if (!strcmp(name, PIDOBJ)) {
- p_pidobj = val;
- SETOPT(opttochk, OPT_op);
- } else if (!strcmp(name, SEMIDOBJ)) {
- p_semobj = val;
- SETOPT(opttochk, OPT_ose);
- } else if (!strcmp(name, SHMIDOBJ)) {
- p_shmobj = val;
- SETOPT(opttochk, OPT_osh);
- } else if (!strcmp(name, SOCKOBJ)) {
- p_sockobj = val;
- SETOPT(opttochk, OPT_oso);
- } else
- usage("unknown value for -o");
-}
-
-int
-main(int argc, char **argv)
-{
- struct group *grp;
- struct passwd *pw;
- struct tm tm;
- au_event_t *n;
- FILE *fp;
- int i;
- char *objval, *converr;
- int ch;
- char timestr[128];
- char *fname;
-
- converr = NULL;
-
- while ((ch = getopt(argc, argv, "Aa:b:c:d:e:f:g:j:m:o:r:u:")) != -1) {
- switch(ch) {
- case 'A':
- SETOPT(opttochk, OPT_A);
- break;
-
- case 'a':
- if (ISOPTSET(opttochk, OPT_a)) {
- usage("d is exclusive with a and b");
- }
- SETOPT(opttochk, OPT_a);
- bzero(&tm, sizeof(tm));
- strptime(optarg, "%Y%m%d%H%M%S", &tm);
- strftime(timestr, sizeof(timestr), "%Y%m%d%H%M%S",
- &tm);
- /* fprintf(stderr, "Time converted = %s\n", timestr); */
- p_atime = mktime(&tm);
- break;
-
- case 'b':
- if (ISOPTSET(opttochk, OPT_b)) {
- usage("d is exclusive with a and b");
- }
- SETOPT(opttochk, OPT_b);
- bzero(&tm, sizeof(tm));
- strptime(optarg, "%Y%m%d%H%M%S", &tm);
- strftime(timestr, sizeof(timestr), "%Y%m%d%H%M%S",
- &tm);
- /* fprintf(stderr, "Time converted = %s\n", timestr); */
- p_btime = mktime(&tm);
- break;
-
- case 'c':
- if (0 != getauditflagsbin(optarg, &maskp)) {
- /* Incorrect class */
- usage("Incorrect class");
- }
- SETOPT(opttochk, OPT_c);
- break;
-
- case 'd':
- if (ISOPTSET(opttochk, OPT_b) || ISOPTSET(opttochk,
- OPT_a))
- usage("'d' is exclusive with 'a' and 'b'");
- SETOPT(opttochk, OPT_d);
- bzero(&tm, sizeof(tm));
- strptime(optarg, "%Y%m%d", &tm);
- strftime(timestr, sizeof(timestr), "%Y%m%d", &tm);
- /* fprintf(stderr, "Time converted = %s\n", timestr); */
- p_atime = mktime(&tm);
- tm.tm_hour = 23;
- tm.tm_min = 59;
- tm.tm_sec = 59;
- strftime(timestr, sizeof(timestr), "%Y%m%d", &tm);
- /* fprintf(stderr, "Time converted = %s\n", timestr); */
- p_btime = mktime(&tm);
- break;
-
- case 'e':
- p_euid = strtol(optarg, &converr, 10);
- if (*converr != '\0') {
- /* Try the actual name */
- if ((pw = getpwnam(optarg)) == NULL)
- break;
- p_euid = pw->pw_uid;
- }
- SETOPT(opttochk, OPT_e);
- break;
-
- case 'f':
- p_egid = strtol(optarg, &converr, 10);
- if (*converr != '\0') {
- /* Try actual group name. */
- if ((grp = getgrnam(optarg)) == NULL)
- break;
- p_egid = grp->gr_gid;
- }
- SETOPT(opttochk, OPT_f);
- break;
-
- case 'g':
- p_rgid = strtol(optarg, &converr, 10);
- if (*converr != '\0') {
- /* Try actual group name. */
- if ((grp = getgrnam(optarg)) == NULL)
- break;
- p_rgid = grp->gr_gid;
- }
- SETOPT(opttochk, OPT_g);
- break;
-
- case 'j':
- p_subid = strtol(optarg, (char **)NULL, 10);
- SETOPT(opttochk, OPT_j);
- break;
-
- case 'm':
- p_evtype = strtol(optarg, (char **)NULL, 10);
- if (p_evtype == 0) {
- /* Could be the string representation. */
- n = getauevnonam(optarg);
- if (n == NULL)
- usage("Incorrect event name");
- p_evtype = *n;
- }
- SETOPT(opttochk, OPT_m);
- break;
-
- case 'o':
- objval = strchr(optarg, '=');
- if (objval != NULL) {
- *objval = '\0';
- objval += 1;
- parse_object_type(optarg, objval);
- }
- break;
-
- case 'r':
- p_ruid = strtol(optarg, &converr, 10);
- if (*converr != '\0') {
- if ((pw = getpwnam(optarg)) == NULL)
- break;
- p_ruid = pw->pw_uid;
- }
- SETOPT(opttochk, OPT_r);
- break;
-
- case 'u':
- p_auid = strtol(optarg, &converr, 10);
- if (*converr != '\0') {
- if ((pw = getpwnam(optarg)) == NULL)
- break;
- p_auid = pw->pw_uid;
- }
- SETOPT(opttochk, OPT_u);
- break;
-
- case '?':
- default:
- usage("Unknown option");
- }
- }
- argv += optind;
- argc -= optind;
-
- if (argc == 0) {
- if (select_records(stdin) == -1)
- errx(EXIT_FAILURE,
- "Couldn't select records from stdin");
- exit(EXIT_SUCCESS);
- }
-
- /*
- * XXX: We should actually be merging records here.
- */
- for (i = 0; i < argc; i++) {
- fname = argv[i];
- fp = fopen(fname, "r");
- if (fp == NULL)
- errx(EXIT_FAILURE, "Couldn't open %s", fname);
- if (select_records(fp) == -1) {
- errx(EXIT_FAILURE, "Couldn't select records %s",
- fname);
- }
- fclose(fp);
- }
- exit(EXIT_SUCCESS);
-}
Copied: vendor/openbsm/1.2_alpha4/bin/auditreduce/auditreduce.c (from rev 11163, vendor/openbsm/dist/bin/auditreduce/auditreduce.c)
===================================================================
--- vendor/openbsm/1.2_alpha4/bin/auditreduce/auditreduce.c (rev 0)
+++ vendor/openbsm/1.2_alpha4/bin/auditreduce/auditreduce.c 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,801 @@
+/*-
+ * Copyright (c) 2004-2008 Apple Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of Apple Inc. ("Apple") nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/*
+ * Tool used to merge and select audit records from audit trail files
+ */
+
+/*
+ * XXX Currently we do not support merging of records from multiple
+ * XXX audit trail files
+ * XXX We assume that records are sorted chronologically - both wrt to
+ * XXX the records present within the file and between the files themselves
+ */
+
+#include <config/config.h>
+
+#define _GNU_SOURCE /* Required for strptime() on glibc2. */
+
+#ifdef HAVE_FULL_QUEUE_H
+#include <sys/queue.h>
+#else
+#include <compat/queue.h>
+#endif
+
+#include <bsm/libbsm.h>
+
+#include <err.h>
+#include <grp.h>
+#include <pwd.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <sysexits.h>
+#include <string.h>
+#include <time.h>
+#include <unistd.h>
+#include <regex.h>
+#include <errno.h>
+
+#ifndef HAVE_STRLCPY
+#include <compat/strlcpy.h>
+#endif
+
+#include "auditreduce.h"
+
+static TAILQ_HEAD(tailhead, re_entry) re_head =
+ TAILQ_HEAD_INITIALIZER(re_head);
+
+extern char *optarg;
+extern int optind, optopt, opterr,optreset;
+
+static au_mask_t maskp; /* Class. */
+static time_t p_atime; /* Created after this time. */
+static time_t p_btime; /* Created before this time. */
+static int p_auid; /* Audit id. */
+static int p_euid; /* Effective user id. */
+static int p_egid; /* Effective group id. */
+static int p_rgid; /* Real group id. */
+static int p_ruid; /* Real user id. */
+static int p_subid; /* Subject id. */
+
+/*
+ * Maintain a dynamically sized array of events for -m
+ */
+static uint16_t *p_evec; /* Event type list */
+static int p_evec_used; /* Number of events used */
+static int p_evec_alloc; /* Number of events allocated */
+
+/*
+ * Following are the objects (-o option) that we can select upon.
+ */
+static char *p_fileobj = NULL;
+static char *p_msgqobj = NULL;
+static char *p_pidobj = NULL;
+static char *p_semobj = NULL;
+static char *p_shmobj = NULL;
+static char *p_sockobj = NULL;
+
+static uint32_t opttochk = 0;
+
+static void
+parse_regexp(char *re_string)
+{
+ char *orig, *copy, re_error[64];
+ struct re_entry *rep;
+ int error, nstrs, i, len;
+
+ copy = strdup(re_string);
+ orig = copy;
+ len = strlen(copy);
+ for (nstrs = 0, i = 0; i < len; i++) {
+ if (copy[i] == ',' && i > 0) {
+ if (copy[i - 1] == '\\')
+ strlcpy(©[i - 1], ©[i], len);
+ else {
+ nstrs++;
+ copy[i] = '\0';
+ }
+ }
+ }
+ TAILQ_INIT(&re_head);
+ for (i = 0; i < nstrs + 1; i++) {
+ rep = calloc(1, sizeof(*rep));
+ if (rep == NULL) {
+ (void) fprintf(stderr, "calloc: %s\n",
+ strerror(errno));
+ exit(1);
+ }
+ if (*copy == '~') {
+ copy++;
+ rep->re_negate = 1;
+ }
+ rep->re_pattern = strdup(copy);
+ error = regcomp(&rep->re_regexp, rep->re_pattern,
+ REG_EXTENDED | REG_NOSUB);
+ if (error != 0) {
+ regerror(error, &rep->re_regexp, re_error, 64);
+ (void) fprintf(stderr, "regcomp: %s\n", re_error);
+ exit(1);
+ }
+ TAILQ_INSERT_TAIL(&re_head, rep, re_glue);
+ len = strlen(copy);
+ copy += len + 1;
+ }
+ free(orig);
+}
+
+static void
+usage(const char *msg)
+{
+ fprintf(stderr, "%s\n", msg);
+ fprintf(stderr, "Usage: auditreduce [options] [file ...]\n");
+ fprintf(stderr, "\tOptions are : \n");
+ fprintf(stderr, "\t-A : all records\n");
+ fprintf(stderr, "\t-a YYYYMMDD[HH[[MM[SS]]] : after date\n");
+ fprintf(stderr, "\t-b YYYYMMDD[HH[[MM[SS]]] : before date\n");
+ fprintf(stderr, "\t-c <flags> : matching class\n");
+ fprintf(stderr, "\t-d YYYYMMDD : on date\n");
+ fprintf(stderr, "\t-e <uid|name> : effective user\n");
+ fprintf(stderr, "\t-f <gid|group> : effective group\n");
+ fprintf(stderr, "\t-g <gid|group> : real group\n");
+ fprintf(stderr, "\t-j <pid> : subject id \n");
+ fprintf(stderr, "\t-m <evno|evname> : matching event\n");
+ fprintf(stderr, "\t-o objecttype=objectvalue\n");
+ fprintf(stderr, "\t\t file=<pathname>\n");
+ fprintf(stderr, "\t\t msgqid=<ID>\n");
+ fprintf(stderr, "\t\t pid=<ID>\n");
+ fprintf(stderr, "\t\t semid=<ID>\n");
+ fprintf(stderr, "\t\t shmid=<ID>\n");
+ fprintf(stderr, "\t-r <uid|name> : real user\n");
+ fprintf(stderr, "\t-u <uid|name> : audit user\n");
+ fprintf(stderr, "\t-v : select non-matching records\n");
+ exit(EX_USAGE);
+}
+
+/*
+ * Check if the given auid matches the selection criteria.
+ */
+static int
+select_auid(int au)
+{
+
+ /* Check if we want to select on auid. */
+ if (ISOPTSET(opttochk, OPT_u)) {
+ if (au != p_auid)
+ return (0);
+ }
+ return (1);
+}
+
+/*
+ * Check if the given euid matches the selection criteria.
+ */
+static int
+select_euid(int euser)
+{
+
+ /* Check if we want to select on euid. */
+ if (ISOPTSET(opttochk, OPT_e)) {
+ if (euser != p_euid)
+ return (0);
+ }
+ return (1);
+}
+
+/*
+ * Check if the given egid matches the selection criteria.
+ */
+static int
+select_egid(int egrp)
+{
+
+ /* Check if we want to select on egid. */
+ if (ISOPTSET(opttochk, OPT_f)) {
+ if (egrp != p_egid)
+ return (0);
+ }
+ return (1);
+}
+
+/*
+ * Check if the given rgid matches the selection criteria.
+ */
+static int
+select_rgid(int grp)
+{
+
+ /* Check if we want to select on rgid. */
+ if (ISOPTSET(opttochk, OPT_g)) {
+ if (grp != p_rgid)
+ return (0);
+ }
+ return (1);
+}
+
+/*
+ * Check if the given ruid matches the selection criteria.
+ */
+static int
+select_ruid(int user)
+{
+
+ /* Check if we want to select on rgid. */
+ if (ISOPTSET(opttochk, OPT_r)) {
+ if (user != p_ruid)
+ return (0);
+ }
+ return (1);
+}
+
+/*
+ * Check if the given subject id (pid) matches the selection criteria.
+ */
+static int
+select_subid(int subid)
+{
+
+ /* Check if we want to select on subject uid. */
+ if (ISOPTSET(opttochk, OPT_j)) {
+ if (subid != p_subid)
+ return (0);
+ }
+ return (1);
+}
+
+
+/*
+ * Check if object's pid maches the given pid.
+ */
+static int
+select_pidobj(uint32_t pid)
+{
+
+ if (ISOPTSET(opttochk, OPT_op)) {
+ if (pid != (uint32_t)strtol(p_pidobj, (char **)NULL, 10))
+ return (0);
+ }
+ return (1);
+}
+
+/*
+ * Check if the given ipc object with the given type matches the selection
+ * criteria.
+ */
+static int
+select_ipcobj(u_char type, uint32_t id, uint32_t *optchkd)
+{
+
+ if (type == AT_IPC_MSG) {
+ SETOPT((*optchkd), OPT_om);
+ if (ISOPTSET(opttochk, OPT_om)) {
+ if (id != (uint32_t)strtol(p_msgqobj, (char **)NULL,
+ 10))
+ return (0);
+ }
+ return (1);
+ } else if (type == AT_IPC_SEM) {
+ SETOPT((*optchkd), OPT_ose);
+ if (ISOPTSET(opttochk, OPT_ose)) {
+ if (id != (uint32_t)strtol(p_semobj, (char **)NULL, 10))
+ return (0);
+ }
+ return (1);
+ } else if (type == AT_IPC_SHM) {
+ SETOPT((*optchkd), OPT_osh);
+ if (ISOPTSET(opttochk, OPT_osh)) {
+ if (id != (uint32_t)strtol(p_shmobj, (char **)NULL, 10))
+ return (0);
+ }
+ return (1);
+ }
+
+ /* Unknown type -- filter if *any* ipc filtering is required. */
+ if (ISOPTSET(opttochk, OPT_om) || ISOPTSET(opttochk, OPT_ose)
+ || ISOPTSET(opttochk, OPT_osh))
+ return (0);
+
+ return (1);
+}
+
+
+/*
+ * Check if the file name matches selection criteria.
+ */
+static int
+select_filepath(char *path, uint32_t *optchkd)
+{
+ struct re_entry *rep;
+ int match;
+
+ SETOPT((*optchkd), OPT_of);
+ match = 1;
+ if (ISOPTSET(opttochk, OPT_of)) {
+ match = 0;
+ TAILQ_FOREACH(rep, &re_head, re_glue) {
+ if (regexec(&rep->re_regexp, path, 0, NULL,
+ 0) != REG_NOMATCH)
+ return (!rep->re_negate);
+ }
+ }
+ return (match);
+}
+
+/*
+ * Returns 1 if the following pass the selection rules:
+ *
+ * before-time,
+ * after time,
+ * date,
+ * class,
+ * event
+ */
+static int
+select_hdr32(tokenstr_t tok, uint32_t *optchkd)
+{
+ uint16_t *ev;
+ int match;
+
+ SETOPT((*optchkd), (OPT_A | OPT_a | OPT_b | OPT_c | OPT_m | OPT_v));
+
+ /* The A option overrides a, b and d. */
+ if (!ISOPTSET(opttochk, OPT_A)) {
+ if (ISOPTSET(opttochk, OPT_a)) {
+ if (difftime((time_t)tok.tt.hdr32.s, p_atime) < 0) {
+ /* Record was created before p_atime. */
+ return (0);
+ }
+ }
+
+ if (ISOPTSET(opttochk, OPT_b)) {
+ if (difftime(p_btime, (time_t)tok.tt.hdr32.s) < 0) {
+ /* Record was created after p_btime. */
+ return (0);
+ }
+ }
+ }
+
+ if (ISOPTSET(opttochk, OPT_c)) {
+ /*
+ * Check if the classes represented by the event matches
+ * given class.
+ */
+ if (au_preselect(tok.tt.hdr32.e_type, &maskp, AU_PRS_BOTH,
+ AU_PRS_USECACHE) != 1)
+ return (0);
+ }
+
+ /* Check if event matches. */
+ if (ISOPTSET(opttochk, OPT_m)) {
+ match = 0;
+ for (ev = p_evec; ev < &p_evec[p_evec_used]; ev++)
+ if (tok.tt.hdr32.e_type == *ev)
+ match = 1;
+ if (match == 0)
+ return (0);
+ }
+
+ return (1);
+}
+
+static int
+select_return32(tokenstr_t tok_ret32, tokenstr_t tok_hdr32, uint32_t *optchkd)
+{
+ int sorf;
+
+ SETOPT((*optchkd), (OPT_c));
+ if (tok_ret32.tt.ret32.status == 0)
+ sorf = AU_PRS_SUCCESS;
+ else
+ sorf = AU_PRS_FAILURE;
+ if (ISOPTSET(opttochk, OPT_c)) {
+ if (au_preselect(tok_hdr32.tt.hdr32.e_type, &maskp, sorf,
+ AU_PRS_USECACHE) != 1)
+ return (0);
+ }
+ return (1);
+}
+
+/*
+ * Return 1 if checks for the the following succeed
+ * auid,
+ * euid,
+ * egid,
+ * rgid,
+ * ruid,
+ * process id
+ */
+static int
+select_proc32(tokenstr_t tok, uint32_t *optchkd)
+{
+
+ SETOPT((*optchkd), (OPT_u | OPT_e | OPT_f | OPT_g | OPT_r | OPT_op));
+
+ if (!select_auid(tok.tt.proc32.auid))
+ return (0);
+ if (!select_euid(tok.tt.proc32.euid))
+ return (0);
+ if (!select_egid(tok.tt.proc32.egid))
+ return (0);
+ if (!select_rgid(tok.tt.proc32.rgid))
+ return (0);
+ if (!select_ruid(tok.tt.proc32.ruid))
+ return (0);
+ if (!select_pidobj(tok.tt.proc32.pid))
+ return (0);
+ return (1);
+}
+
+/*
+ * Return 1 if checks for the the following succeed
+ * auid,
+ * euid,
+ * egid,
+ * rgid,
+ * ruid,
+ * subject id
+ */
+static int
+select_subj32(tokenstr_t tok, uint32_t *optchkd)
+{
+
+ SETOPT((*optchkd), (OPT_u | OPT_e | OPT_f | OPT_g | OPT_r | OPT_j));
+
+ if (!select_auid(tok.tt.subj32.auid))
+ return (0);
+ if (!select_euid(tok.tt.subj32.euid))
+ return (0);
+ if (!select_egid(tok.tt.subj32.egid))
+ return (0);
+ if (!select_rgid(tok.tt.subj32.rgid))
+ return (0);
+ if (!select_ruid(tok.tt.subj32.ruid))
+ return (0);
+ if (!select_subid(tok.tt.subj32.pid))
+ return (0);
+ return (1);
+}
+
+/*
+ * Read each record from the audit trail. Check if it is selected after
+ * passing through each of the options
+ */
+static int
+select_records(FILE *fp)
+{
+ tokenstr_t tok_hdr32_copy;
+ u_char *buf;
+ tokenstr_t tok;
+ int reclen;
+ int bytesread;
+ int selected;
+ uint32_t optchkd;
+ int print;
+
+ int err = 0;
+ while ((reclen = au_read_rec(fp, &buf)) != -1) {
+ optchkd = 0;
+ bytesread = 0;
+ selected = 1;
+ while ((selected == 1) && (bytesread < reclen)) {
+ if (-1 == au_fetch_tok(&tok, buf + bytesread,
+ reclen - bytesread)) {
+ /* Is this an incomplete record? */
+ err = 1;
+ break;
+ }
+
+ /*
+ * For each token type we have have different
+ * selection criteria.
+ */
+ switch(tok.id) {
+ case AUT_HEADER32:
+ selected = select_hdr32(tok,
+ &optchkd);
+ bcopy(&tok, &tok_hdr32_copy,
+ sizeof(tok));
+ break;
+
+ case AUT_PROCESS32:
+ selected = select_proc32(tok,
+ &optchkd);
+ break;
+
+ case AUT_SUBJECT32:
+ selected = select_subj32(tok,
+ &optchkd);
+ break;
+
+ case AUT_IPC:
+ selected = select_ipcobj(
+ tok.tt.ipc.type, tok.tt.ipc.id,
+ &optchkd);
+ break;
+
+ case AUT_PATH:
+ selected = select_filepath(
+ tok.tt.path.path, &optchkd);
+ break;
+
+ case AUT_RETURN32:
+ selected = select_return32(tok,
+ tok_hdr32_copy, &optchkd);
+ break;
+
+ default:
+ break;
+ }
+ bytesread += tok.len;
+ }
+ /* Check if all the options were matched. */
+ print = ((selected == 1) && (!err) && (!(opttochk & ~optchkd)));
+ if (ISOPTSET(opttochk, OPT_v))
+ print = !print;
+ if (print)
+ (void) fwrite(buf, 1, reclen, stdout);
+ free(buf);
+ }
+ return (0);
+}
+
+/*
+ * The -o option has the form object_type=object_value. Identify the object
+ * components.
+ */
+static void
+parse_object_type(char *name, char *val)
+{
+ if (val == NULL)
+ return;
+
+ if (!strcmp(name, FILEOBJ)) {
+ p_fileobj = val;
+ parse_regexp(val);
+ SETOPT(opttochk, OPT_of);
+ } else if (!strcmp(name, MSGQIDOBJ)) {
+ p_msgqobj = val;
+ SETOPT(opttochk, OPT_om);
+ } else if (!strcmp(name, PIDOBJ)) {
+ p_pidobj = val;
+ SETOPT(opttochk, OPT_op);
+ } else if (!strcmp(name, SEMIDOBJ)) {
+ p_semobj = val;
+ SETOPT(opttochk, OPT_ose);
+ } else if (!strcmp(name, SHMIDOBJ)) {
+ p_shmobj = val;
+ SETOPT(opttochk, OPT_osh);
+ } else if (!strcmp(name, SOCKOBJ)) {
+ p_sockobj = val;
+ SETOPT(opttochk, OPT_oso);
+ } else
+ usage("unknown value for -o");
+}
+
+int
+main(int argc, char **argv)
+{
+ struct group *grp;
+ struct passwd *pw;
+ struct tm tm;
+ au_event_t *n;
+ FILE *fp;
+ int i;
+ char *objval, *converr;
+ int ch;
+ char timestr[128];
+ char *fname;
+ uint16_t *etp;
+
+ converr = NULL;
+
+ while ((ch = getopt(argc, argv, "Aa:b:c:d:e:f:g:j:m:o:r:u:v")) != -1) {
+ switch(ch) {
+ case 'A':
+ SETOPT(opttochk, OPT_A);
+ break;
+
+ case 'a':
+ if (ISOPTSET(opttochk, OPT_a)) {
+ usage("d is exclusive with a and b");
+ }
+ SETOPT(opttochk, OPT_a);
+ bzero(&tm, sizeof(tm));
+ strptime(optarg, "%Y%m%d%H%M%S", &tm);
+ strftime(timestr, sizeof(timestr), "%Y%m%d%H%M%S",
+ &tm);
+ /* fprintf(stderr, "Time converted = %s\n", timestr); */
+ p_atime = mktime(&tm);
+ break;
+
+ case 'b':
+ if (ISOPTSET(opttochk, OPT_b)) {
+ usage("d is exclusive with a and b");
+ }
+ SETOPT(opttochk, OPT_b);
+ bzero(&tm, sizeof(tm));
+ strptime(optarg, "%Y%m%d%H%M%S", &tm);
+ strftime(timestr, sizeof(timestr), "%Y%m%d%H%M%S",
+ &tm);
+ /* fprintf(stderr, "Time converted = %s\n", timestr); */
+ p_btime = mktime(&tm);
+ break;
+
+ case 'c':
+ if (0 != getauditflagsbin(optarg, &maskp)) {
+ /* Incorrect class */
+ usage("Incorrect class");
+ }
+ SETOPT(opttochk, OPT_c);
+ break;
+
+ case 'd':
+ if (ISOPTSET(opttochk, OPT_b) || ISOPTSET(opttochk,
+ OPT_a))
+ usage("'d' is exclusive with 'a' and 'b'");
+ SETOPT(opttochk, OPT_d);
+ bzero(&tm, sizeof(tm));
+ strptime(optarg, "%Y%m%d", &tm);
+ strftime(timestr, sizeof(timestr), "%Y%m%d", &tm);
+ /* fprintf(stderr, "Time converted = %s\n", timestr); */
+ p_atime = mktime(&tm);
+ tm.tm_hour = 23;
+ tm.tm_min = 59;
+ tm.tm_sec = 59;
+ strftime(timestr, sizeof(timestr), "%Y%m%d", &tm);
+ /* fprintf(stderr, "Time converted = %s\n", timestr); */
+ p_btime = mktime(&tm);
+ break;
+
+ case 'e':
+ p_euid = strtol(optarg, &converr, 10);
+ if (*converr != '\0') {
+ /* Try the actual name */
+ if ((pw = getpwnam(optarg)) == NULL)
+ break;
+ p_euid = pw->pw_uid;
+ }
+ SETOPT(opttochk, OPT_e);
+ break;
+
+ case 'f':
+ p_egid = strtol(optarg, &converr, 10);
+ if (*converr != '\0') {
+ /* Try actual group name. */
+ if ((grp = getgrnam(optarg)) == NULL)
+ break;
+ p_egid = grp->gr_gid;
+ }
+ SETOPT(opttochk, OPT_f);
+ break;
+
+ case 'g':
+ p_rgid = strtol(optarg, &converr, 10);
+ if (*converr != '\0') {
+ /* Try actual group name. */
+ if ((grp = getgrnam(optarg)) == NULL)
+ break;
+ p_rgid = grp->gr_gid;
+ }
+ SETOPT(opttochk, OPT_g);
+ break;
+
+ case 'j':
+ p_subid = strtol(optarg, (char **)NULL, 10);
+ SETOPT(opttochk, OPT_j);
+ break;
+
+ case 'm':
+ if (p_evec == NULL) {
+ p_evec_alloc = 32;
+ p_evec = malloc(sizeof(*etp) * p_evec_alloc);
+ if (p_evec == NULL)
+ err(1, "malloc");
+ } else if (p_evec_alloc == p_evec_used) {
+ p_evec_alloc <<= 1;
+ p_evec = realloc(p_evec,
+ sizeof(*p_evec) * p_evec_alloc);
+ if (p_evec == NULL)
+ err(1, "realloc");
+ }
+ etp = &p_evec[p_evec_used++];
+ *etp = strtol(optarg, (char **)NULL, 10);
+ if (*etp == 0) {
+ /* Could be the string representation. */
+ n = getauevnonam(optarg);
+ if (n == NULL)
+ usage("Incorrect event name");
+ *etp = *n;
+ }
+ SETOPT(opttochk, OPT_m);
+ break;
+
+ case 'o':
+ objval = strchr(optarg, '=');
+ if (objval != NULL) {
+ *objval = '\0';
+ objval += 1;
+ parse_object_type(optarg, objval);
+ }
+ break;
+
+ case 'r':
+ p_ruid = strtol(optarg, &converr, 10);
+ if (*converr != '\0') {
+ if ((pw = getpwnam(optarg)) == NULL)
+ break;
+ p_ruid = pw->pw_uid;
+ }
+ SETOPT(opttochk, OPT_r);
+ break;
+
+ case 'u':
+ p_auid = strtol(optarg, &converr, 10);
+ if (*converr != '\0') {
+ if ((pw = getpwnam(optarg)) == NULL)
+ break;
+ p_auid = pw->pw_uid;
+ }
+ SETOPT(opttochk, OPT_u);
+ break;
+
+ case 'v':
+ SETOPT(opttochk, OPT_v);
+ break;
+
+ case '?':
+ default:
+ usage("Unknown option");
+ }
+ }
+ argv += optind;
+ argc -= optind;
+
+ if (argc == 0) {
+ if (select_records(stdin) == -1)
+ errx(EXIT_FAILURE,
+ "Couldn't select records from stdin");
+ exit(EXIT_SUCCESS);
+ }
+
+ /*
+ * XXX: We should actually be merging records here.
+ */
+ for (i = 0; i < argc; i++) {
+ fname = argv[i];
+ fp = fopen(fname, "r");
+ if (fp == NULL)
+ errx(EXIT_FAILURE, "Couldn't open %s", fname);
+ if (select_records(fp) == -1) {
+ errx(EXIT_FAILURE, "Couldn't select records %s",
+ fname);
+ }
+ fclose(fp);
+ }
+ exit(EXIT_SUCCESS);
+}
Deleted: vendor/openbsm/1.2_alpha4/bin/auditreduce/auditreduce.h
===================================================================
--- vendor/openbsm/dist/bin/auditreduce/auditreduce.h 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/bin/auditreduce/auditreduce.h 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,74 +0,0 @@
-/*
- * Copyright (c) 2004 Apple Computer, Inc.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. Neither the name of Apple Computer, Inc. ("Apple") nor the names of
- * its contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR
- * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
- * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- * $P4: //depot/projects/trustedbsd/openbsm/bin/auditreduce/auditreduce.h#5 $
- */
-
-#ifndef _AUDITREDUCE_H_
-#define _AUDITREDUCE_H_
-
-
-struct re_entry {
- char *re_pattern;
- int re_negate;
- regex_t re_regexp;
- TAILQ_ENTRY(re_entry) re_glue;
-};
-
-#define OPT_a 0x00000001
-#define OPT_b 0x00000002
-#define OPT_c 0x00000004
-#define OPT_d (OPT_a | OPT_b)
-#define OPT_e 0x00000010
-#define OPT_f 0x00000020
-#define OPT_g 0x00000040
-#define OPT_j 0x00000080
-#define OPT_m 0x00000100
-#define OPT_of 0x00000200
-#define OPT_om 0x00000400
-#define OPT_op 0x00000800
-#define OPT_ose 0x00001000
-#define OPT_osh 0x00002000
-#define OPT_oso 0x00004000
-#define OPT_r 0x00008000
-#define OPT_u 0x00010000
-#define OPT_A 0x00020000
-
-#define FILEOBJ "file"
-#define MSGQIDOBJ "msgqid"
-#define PIDOBJ "pid"
-#define SEMIDOBJ "semid"
-#define SHMIDOBJ "shmid"
-#define SOCKOBJ "sock"
-
-
-#define SETOPT(optmask, bit) (optmask |= bit)
-#define ISOPTSET(optmask, bit) (optmask & bit)
-
-
-#endif /* !_AUDITREDUCE_H_ */
Copied: vendor/openbsm/1.2_alpha4/bin/auditreduce/auditreduce.h (from rev 11163, vendor/openbsm/dist/bin/auditreduce/auditreduce.h)
===================================================================
--- vendor/openbsm/1.2_alpha4/bin/auditreduce/auditreduce.h (rev 0)
+++ vendor/openbsm/1.2_alpha4/bin/auditreduce/auditreduce.h 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,73 @@
+/*-
+ * Copyright (c) 2004 Apple Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of Apple Inc. ("Apple") nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _AUDITREDUCE_H_
+#define _AUDITREDUCE_H_
+
+
+struct re_entry {
+ char *re_pattern;
+ int re_negate;
+ regex_t re_regexp;
+ TAILQ_ENTRY(re_entry) re_glue;
+};
+
+#define OPT_a 0x00000001
+#define OPT_b 0x00000002
+#define OPT_c 0x00000004
+#define OPT_d (OPT_a | OPT_b)
+#define OPT_e 0x00000010
+#define OPT_f 0x00000020
+#define OPT_g 0x00000040
+#define OPT_j 0x00000080
+#define OPT_m 0x00000100
+#define OPT_of 0x00000200
+#define OPT_om 0x00000400
+#define OPT_op 0x00000800
+#define OPT_ose 0x00001000
+#define OPT_osh 0x00002000
+#define OPT_oso 0x00004000
+#define OPT_r 0x00008000
+#define OPT_u 0x00010000
+#define OPT_A 0x00020000
+#define OPT_v 0x00040000
+
+#define FILEOBJ "file"
+#define MSGQIDOBJ "msgqid"
+#define PIDOBJ "pid"
+#define SEMIDOBJ "semid"
+#define SHMIDOBJ "shmid"
+#define SOCKOBJ "sock"
+
+
+#define SETOPT(optmask, bit) (optmask |= bit)
+#define ISOPTSET(optmask, bit) (optmask & bit)
+
+
+#endif /* !_AUDITREDUCE_H_ */
Deleted: vendor/openbsm/1.2_alpha4/bin/praudit/Makefile.am
===================================================================
--- vendor/openbsm/dist/bin/praudit/Makefile.am 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/bin/praudit/Makefile.am 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,10 +0,0 @@
-#
-# $P4: //depot/projects/trustedbsd/openbsm/bin/praudit/Makefile.am#1 $
-#
-
-INCLUDES = -I$(top_srcdir)
-
-sbin_PROGRAMS = praudit
-praudit_SOURCES = praudit.c
-praudit_LDADD = $(top_builddir)/libbsm/libbsm.la
-man1_MANS = praudit.1
Copied: vendor/openbsm/1.2_alpha4/bin/praudit/Makefile.am (from rev 11163, vendor/openbsm/dist/bin/praudit/Makefile.am)
===================================================================
--- vendor/openbsm/1.2_alpha4/bin/praudit/Makefile.am (rev 0)
+++ vendor/openbsm/1.2_alpha4/bin/praudit/Makefile.am 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,10 @@
+if USE_NATIVE_INCLUDES
+INCLUDES = -I$(top_builddir) -I$(top_srcdir)
+else
+INCLUDES = -I$(top_builddir) -I$(top_srcdir) -I$(top_srcdir)/sys
+endif
+
+sbin_PROGRAMS = praudit
+praudit_SOURCES = praudit.c
+praudit_LDADD = $(top_builddir)/libbsm/libbsm.la
+man1_MANS = praudit.1
Deleted: vendor/openbsm/1.2_alpha4/bin/praudit/Makefile.in
===================================================================
--- vendor/openbsm/dist/bin/praudit/Makefile.in 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/bin/praudit/Makefile.in 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,516 +0,0 @@
-# Makefile.in generated by automake 1.10 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
- at SET_MAKE@
-
-#
-# $P4: //depot/projects/trustedbsd/openbsm/bin/praudit/Makefile.in#4 $
-#
-
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-sbin_PROGRAMS = praudit$(EXEEXT)
-subdir = bin/praudit
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/config/config.h
-CONFIG_CLEAN_FILES =
-am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man1dir)"
-sbinPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
-PROGRAMS = $(sbin_PROGRAMS)
-am_praudit_OBJECTS = praudit.$(OBJEXT)
-praudit_OBJECTS = $(am_praudit_OBJECTS)
-praudit_DEPENDENCIES = $(top_builddir)/libbsm/libbsm.la
-DEFAULT_INCLUDES = -I. -I$(top_builddir)/config at am__isrc@
-depcomp = $(SHELL) $(top_srcdir)/config/depcomp
-am__depfiles_maybe = depfiles
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
- $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
- --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
- $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
- --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
- $(LDFLAGS) -o $@
-SOURCES = $(praudit_SOURCES)
-DIST_SOURCES = $(praudit_SOURCES)
-man1dir = $(mandir)/man1
-NROFF = nroff
-MANS = $(man1_MANS)
-ETAGS = etags
-CTAGS = ctags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AMTAR = @AMTAR@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO = @ECHO@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-F77 = @F77@
-FFLAGS = @FFLAGS@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-VERSION = @VERSION@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-INCLUDES = -I$(top_srcdir)
-praudit_SOURCES = praudit.c
-praudit_LDADD = $(top_builddir)/libbsm/libbsm.la
-man1_MANS = praudit.1
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .c .lo .o .obj
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
- && exit 0; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign bin/praudit/Makefile'; \
- cd $(top_srcdir) && \
- $(AUTOMAKE) --foreign bin/praudit/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-install-sbinPROGRAMS: $(sbin_PROGRAMS)
- @$(NORMAL_INSTALL)
- test -z "$(sbindir)" || $(MKDIR_P) "$(DESTDIR)$(sbindir)"
- @list='$(sbin_PROGRAMS)'; for p in $$list; do \
- p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
- if test -f $$p \
- || test -f $$p1 \
- ; then \
- f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
- echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(sbinPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(sbindir)/$$f'"; \
- $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(sbinPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(sbindir)/$$f" || exit 1; \
- else :; fi; \
- done
-
-uninstall-sbinPROGRAMS:
- @$(NORMAL_UNINSTALL)
- @list='$(sbin_PROGRAMS)'; for p in $$list; do \
- f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
- echo " rm -f '$(DESTDIR)$(sbindir)/$$f'"; \
- rm -f "$(DESTDIR)$(sbindir)/$$f"; \
- done
-
-clean-sbinPROGRAMS:
- @list='$(sbin_PROGRAMS)'; for p in $$list; do \
- f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
- echo " rm -f $$p $$f"; \
- rm -f $$p $$f ; \
- done
-praudit$(EXEEXT): $(praudit_OBJECTS) $(praudit_DEPENDENCIES)
- @rm -f praudit$(EXEEXT)
- $(LINK) $(praudit_OBJECTS) $(praudit_LDADD) $(LIBS)
-
-mostlyclean-compile:
- -rm -f *.$(OBJEXT)
-
-distclean-compile:
- -rm -f *.tab.c
-
- at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/praudit.Po at am__quote@
-
-.c.o:
- at am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
- at am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
- at AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
- at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
- at am__fastdepCC_FALSE@ $(COMPILE) -c $<
-
-.c.obj:
- at am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
- at am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
- at AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
- at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
- at am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
-
-.c.lo:
- at am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
- at am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
- at AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
- at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
- at am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $<
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-install-man1: $(man1_MANS) $(man_MANS)
- @$(NORMAL_INSTALL)
- test -z "$(man1dir)" || $(MKDIR_P) "$(DESTDIR)$(man1dir)"
- @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
- l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
- for i in $$l2; do \
- case "$$i" in \
- *.1*) list="$$list $$i" ;; \
- esac; \
- done; \
- for i in $$list; do \
- if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
- else file=$$i; fi; \
- ext=`echo $$i | sed -e 's/^.*\\.//'`; \
- case "$$ext" in \
- 1*) ;; \
- *) ext='1' ;; \
- esac; \
- inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
- inst=`echo $$inst | sed -e 's/^.*\///'`; \
- inst=`echo $$inst | sed '$(transform)'`.$$ext; \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst"; \
- done
-uninstall-man1:
- @$(NORMAL_UNINSTALL)
- @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
- l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
- for i in $$l2; do \
- case "$$i" in \
- *.1*) list="$$list $$i" ;; \
- esac; \
- done; \
- for i in $$list; do \
- ext=`echo $$i | sed -e 's/^.*\\.//'`; \
- case "$$ext" in \
- 1*) ;; \
- *) ext='1' ;; \
- esac; \
- inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
- inst=`echo $$inst | sed -e 's/^.*\///'`; \
- inst=`echo $$inst | sed '$(transform)'`.$$ext; \
- echo " rm -f '$(DESTDIR)$(man1dir)/$$inst'"; \
- rm -f "$(DESTDIR)$(man1dir)/$$inst"; \
- done
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- mkid -fID $$unique
-tags: TAGS
-
-TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
- test -n "$$unique" || unique=$$empty_fix; \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$tags $$unique; \
- fi
-ctags: CTAGS
-CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(CTAGS_ARGS)$$tags$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$tags $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && cd $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) $$here
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
- fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
- else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(PROGRAMS) $(MANS)
-installdirs:
- for dir in "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man1dir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic clean-libtool clean-sbinPROGRAMS \
- mostlyclean-am
-
-distclean: distclean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
- distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-info: info-am
-
-info-am:
-
-install-data-am: install-man
-
-install-dvi: install-dvi-am
-
-install-exec-am: install-sbinPROGRAMS
-
-install-html: install-html-am
-
-install-info: install-info-am
-
-install-man: install-man1
-
-install-pdf: install-pdf-am
-
-install-ps: install-ps-am
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic \
- mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-man uninstall-sbinPROGRAMS
-
-uninstall-man: uninstall-man1
-
-.MAKE: install-am install-strip
-
-.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
- clean-libtool clean-sbinPROGRAMS ctags distclean \
- distclean-compile distclean-generic distclean-libtool \
- distclean-tags distdir dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-man1 install-pdf install-pdf-am install-ps \
- install-ps-am install-sbinPROGRAMS install-strip installcheck \
- installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-compile \
- mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
- tags uninstall uninstall-am uninstall-man uninstall-man1 \
- uninstall-sbinPROGRAMS
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
Copied: vendor/openbsm/1.2_alpha4/bin/praudit/Makefile.in (from rev 11163, vendor/openbsm/dist/bin/praudit/Makefile.in)
===================================================================
--- vendor/openbsm/1.2_alpha4/bin/praudit/Makefile.in (rev 0)
+++ vendor/openbsm/1.2_alpha4/bin/praudit/Makefile.in 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,647 @@
+# Makefile.in generated by automake 1.12.2 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2012 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+ at SET_MAKE@
+
+VPATH = @srcdir@
+am__make_dryrun = \
+ { \
+ am__dry=no; \
+ case $$MAKEFLAGS in \
+ *\\[\ \ ]*) \
+ echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
+ | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+ *) \
+ for am__flg in $$MAKEFLAGS; do \
+ case $$am__flg in \
+ *=*|--*) ;; \
+ *n*) am__dry=yes; break;; \
+ esac; \
+ done;; \
+ esac; \
+ test $$am__dry = yes; \
+ }
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+sbin_PROGRAMS = praudit$(EXEEXT)
+subdir = bin/praudit
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
+ $(top_srcdir)/config/depcomp
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man1dir)"
+PROGRAMS = $(sbin_PROGRAMS)
+am_praudit_OBJECTS = praudit.$(OBJEXT)
+praudit_OBJECTS = $(am_praudit_OBJECTS)
+praudit_DEPENDENCIES = $(top_builddir)/libbsm/libbsm.la
+DEFAULT_INCLUDES = -I. at am__isrc@ -I$(top_builddir)/config
+depcomp = $(SHELL) $(top_srcdir)/config/depcomp
+am__depfiles_maybe = depfiles
+am__mv = mv -f
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+ --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+ --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
+ $(LDFLAGS) -o $@
+SOURCES = $(praudit_SOURCES)
+DIST_SOURCES = $(praudit_SOURCES)
+am__can_run_installinfo = \
+ case $$AM_UPDATE_INFO_DIR in \
+ n|no|NO) false;; \
+ *) (install-info --version) >/dev/null 2>&1;; \
+ esac
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+ *) f=$$p;; \
+ esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+ if (++n[$$2] == $(am__install_max)) \
+ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+ END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+ test -z "$$files" \
+ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+ $(am__cd) "$$dir" && rm -f $$files; }; \
+ }
+man1dir = $(mandir)/man1
+NROFF = nroff
+MANS = $(man1_MANS)
+ETAGS = etags
+CTAGS = ctags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LEX = @LEX@
+LEXLIB = @LEXLIB@
+LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MIG = @MIG@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+VERSION = @VERSION@
+YACC = @YACC@
+YFLAGS = @YFLAGS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+ at USE_NATIVE_INCLUDES_FALSE@INCLUDES = -I$(top_builddir) -I$(top_srcdir) -I$(top_srcdir)/sys
+ at USE_NATIVE_INCLUDES_TRUE@INCLUDES = -I$(top_builddir) -I$(top_srcdir)
+praudit_SOURCES = praudit.c
+praudit_LDADD = $(top_builddir)/libbsm/libbsm.la
+man1_MANS = praudit.1
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .lo .o .obj
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+ && { if test -f $@; then exit 0; else break; fi; }; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign bin/praudit/Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --foreign bin/praudit/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+install-sbinPROGRAMS: $(sbin_PROGRAMS)
+ @$(NORMAL_INSTALL)
+ @list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \
+ if test -n "$$list"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
+ fi; \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed 's/$(EXEEXT)$$//' | \
+ while read p p1; do if test -f $$p || test -f $$p1; \
+ then echo "$$p"; echo "$$p"; else :; fi; \
+ done | \
+ sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
+ -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+ sed 'N;N;N;s,\n, ,g' | \
+ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+ if ($$2 == $$4) files[d] = files[d] " " $$1; \
+ else { print "f", $$3 "/" $$4, $$1; } } \
+ END { for (d in files) print "f", d, files[d] }' | \
+ while read type dir files; do \
+ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+ test -z "$$files" || { \
+ echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
+ $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
+ } \
+ ; done
+
+uninstall-sbinPROGRAMS:
+ @$(NORMAL_UNINSTALL)
+ @list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \
+ files=`for p in $$list; do echo "$$p"; done | \
+ sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+ -e 's/$$/$(EXEEXT)/' `; \
+ test -n "$$list" || exit 0; \
+ echo " ( cd '$(DESTDIR)$(sbindir)' && rm -f" $$files ")"; \
+ cd "$(DESTDIR)$(sbindir)" && rm -f $$files
+
+clean-sbinPROGRAMS:
+ @list='$(sbin_PROGRAMS)'; test -n "$$list" || exit 0; \
+ echo " rm -f" $$list; \
+ rm -f $$list || exit $$?; \
+ test -n "$(EXEEXT)" || exit 0; \
+ list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+ echo " rm -f" $$list; \
+ rm -f $$list
+praudit$(EXEEXT): $(praudit_OBJECTS) $(praudit_DEPENDENCIES) $(EXTRA_praudit_DEPENDENCIES)
+ @rm -f praudit$(EXEEXT)
+ $(LINK) $(praudit_OBJECTS) $(praudit_LDADD) $(LIBS)
+
+mostlyclean-compile:
+ -rm -f *.$(OBJEXT)
+
+distclean-compile:
+ -rm -f *.tab.c
+
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/praudit.Po at am__quote@
+
+.c.o:
+ at am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+ at am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ at am__fastdepCC_FALSE@ $(COMPILE) -c $<
+
+.c.obj:
+ at am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+ at am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ at am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
+
+.c.lo:
+ at am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+ at am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ at am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $<
+
+mostlyclean-libtool:
+ -rm -f *.lo
+
+clean-libtool:
+ -rm -rf .libs _libs
+install-man1: $(man1_MANS)
+ @$(NORMAL_INSTALL)
+ @list1='$(man1_MANS)'; \
+ list2=''; \
+ test -n "$(man1dir)" \
+ && test -n "`echo $$list1$$list2`" \
+ || exit 0; \
+ echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
+ { for i in $$list1; do echo "$$i"; done; \
+ if test -n "$$list2"; then \
+ for i in $$list2; do echo "$$i"; done \
+ | sed -n '/\.1[a-z]*$$/p'; \
+ fi; \
+ } | while read p; do \
+ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; echo "$$p"; \
+ done | \
+ sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+ sed 'N;N;s,\n, ,g' | { \
+ list=; while read file base inst; do \
+ if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
+ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
+ fi; \
+ done; \
+ for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+ while read files; do \
+ test -z "$$files" || { \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
+ done; }
+
+uninstall-man1:
+ @$(NORMAL_UNINSTALL)
+ @list='$(man1_MANS)'; test -n "$(man1dir)" || exit 0; \
+ files=`{ for i in $$list; do echo "$$i"; done; \
+ } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+ dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ set x; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ shift; \
+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ if test $$# -gt 0; then \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ "$$@" $$unique; \
+ else \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$unique; \
+ fi; \
+ fi
+ctags: CTAGS
+CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ test -z "$(CTAGS_ARGS)$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && $(am__cd) $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) "$$here"
+
+cscopelist: $(HEADERS) $(SOURCES) $(LISP)
+ list='$(SOURCES) $(HEADERS) $(LISP)'; \
+ case "$(srcdir)" in \
+ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+ *) sdir=$(subdir)/$(srcdir) ;; \
+ esac; \
+ for i in $$list; do \
+ if test -f "$$i"; then \
+ echo "$(subdir)/$$i"; \
+ else \
+ echo "$$sdir/$$i"; \
+ fi; \
+ done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+ @list='$(MANS)'; if test -n "$$list"; then \
+ list=`for p in $$list; do \
+ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+ if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
+ if test -n "$$list" && \
+ grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
+ echo "error: found man pages containing the 'missing help2man' replacement text:" >&2; \
+ grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \
+ echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \
+ echo " typically 'make maintainer-clean' will remove them" >&2; \
+ exit 1; \
+ else :; fi; \
+ else :; fi
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+ else \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+check: check-am
+all-am: Makefile $(PROGRAMS) $(MANS)
+installdirs:
+ for dir in "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man1dir)"; do \
+ test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+ done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+ if test -z '$(STRIP)'; then \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ install; \
+ else \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+ fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libtool clean-sbinPROGRAMS \
+ mostlyclean-am
+
+distclean: distclean-am
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+ distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-man
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am: install-sbinPROGRAMS
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man: install-man1
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+ mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-man uninstall-sbinPROGRAMS
+
+uninstall-man: uninstall-man1
+
+.MAKE: install-am install-strip
+
+.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
+ clean-libtool clean-sbinPROGRAMS cscopelist ctags distclean \
+ distclean-compile distclean-generic distclean-libtool \
+ distclean-tags distdir dvi dvi-am html html-am info info-am \
+ install install-am install-data install-data-am install-dvi \
+ install-dvi-am install-exec install-exec-am install-html \
+ install-html-am install-info install-info-am install-man \
+ install-man1 install-pdf install-pdf-am install-ps \
+ install-ps-am install-sbinPROGRAMS install-strip installcheck \
+ installcheck-am installdirs maintainer-clean \
+ maintainer-clean-generic mostlyclean mostlyclean-compile \
+ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+ tags uninstall uninstall-am uninstall-man uninstall-man1 \
+ uninstall-sbinPROGRAMS
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
Deleted: vendor/openbsm/1.2_alpha4/bin/praudit/praudit.1
===================================================================
--- vendor/openbsm/dist/bin/praudit/praudit.1 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/bin/praudit/praudit.1 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,118 +0,0 @@
-.\" Copyright (c) 2004 Apple Computer, Inc.
-.\" All rights reserved.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\" notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\" notice, this list of conditions and the following disclaimer in the
-.\" documentation and/or other materials provided with the distribution.
-.\" 3. Neither the name of Apple Computer, Inc. ("Apple") nor the names of
-.\" its contributors may be used to endorse or promote products derived
-.\" from this software without specific prior written permission.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND
-.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-.\" ARE DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR
-.\" ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-.\" STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
-.\" IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-.\" POSSIBILITY OF SUCH DAMAGE.
-.\"
-.\" $P4: //depot/projects/trustedbsd/openbsm/bin/praudit/praudit.1#12 $
-.\"
-.Dd November 5, 2006
-.Dt PRAUDIT 1
-.Os
-.Sh NAME
-.Nm praudit
-.Nd "print the contents of audit trail files"
-.Sh SYNOPSIS
-.Nm
-.Op Fl lpx
-.Op Fl r | s
-.Op Fl d Ar del
-.Op Ar
-.Sh DESCRIPTION
-The
-.Nm
-utility prints the contents of the audit trail files to the standard output in
-human-readable form.
-If no
-.Ar file
-argument is specified, the standard input is used
-by default.
-.Pp
-The options are as follows:
-.Bl -tag -width indent
-.It Fl d Ar del
-Specifies the delimiter.
-The default delimiter is the comma.
-.It Fl l
-Prints the entire record on the same line.
-If this option is not specified,
-every token is displayed on a different line.
-.It Fl p
-Specify this option if input to
-.Nm
-is piped from the
-.Xr tail 1
-utility.
-This causes
-.Nm
-to sync to the start of the next record.
-.It Fl r
-Prints the records in their raw, numeric form.
-This option is exclusive from
-.Fl s .
-.It Fl s
-Prints the tokens in their short form.
-Short text representations for
-record and event type are displayed.
-This option is exclusive from
-.Fl r .
-.It Fl x
-Print audit records in the XML output format.
-.El
-.Pp
-If the raw or short forms are not specified, the default is to print the tokens
-in their long form.
-Events are displayed as per their descriptions given in
-.Pa /etc/security/audit_event ;
-UIDs and GIDs are expanded to their names;
-dates and times are displayed in human-readable format.
-.Sh FILES
-.Bl -tag -width ".Pa /etc/security/audit_control" -compact
-.It Pa /etc/security/audit_class
-Descriptions of audit event classes.
-.It Pa /etc/security/audit_event
-Descriptions of audit events.
-.El
-.Sh SEE ALSO
-.Xr auditreduce 1 ,
-.Xr audit 4 ,
-.Xr auditpipe 4 ,
-.Xr audit_class 5 ,
-.Xr audit_event 5
-.Sh HISTORY
-The OpenBSM implementation was created by McAfee Research, the security
-division of McAfee Inc., under contract to Apple Computer Inc.\& in 2004.
-It was subsequently adopted by the TrustedBSD Project as the foundation for
-the OpenBSM distribution.
-.Sh AUTHORS
-.An -nosplit
-This software was created by McAfee Research, the security research division
-of McAfee, Inc., under contract to Apple Computer Inc.
-Additional authors include
-.An Wayne Salamon ,
-.An Robert Watson ,
-and SPARTA Inc.
-.Pp
-The Basic Security Module (BSM) interface to audit records and audit event
-stream format were defined by Sun Microsystems.
Copied: vendor/openbsm/1.2_alpha4/bin/praudit/praudit.1 (from rev 11163, vendor/openbsm/dist/bin/praudit/praudit.1)
===================================================================
--- vendor/openbsm/1.2_alpha4/bin/praudit/praudit.1 (rev 0)
+++ vendor/openbsm/1.2_alpha4/bin/praudit/praudit.1 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,119 @@
+.\" Copyright (c) 2004-2009 Apple Inc.
+.\" All rights reserved.
+.\"
+.\" Redistribution and use in source and binary forms, with or without
+.\" modification, are permitted provided that the following conditions
+.\" are met:
+.\" 1. Redistributions of source code must retain the above copyright
+.\" notice, this list of conditions and the following disclaimer.
+.\" 2. Redistributions in binary form must reproduce the above copyright
+.\" notice, this list of conditions and the following disclaimer in the
+.\" documentation and/or other materials provided with the distribution.
+.\" 3. Neither the name of Apple Inc. ("Apple") nor the names of
+.\" its contributors may be used to endorse or promote products derived
+.\" from this software without specific prior written permission.
+.\"
+.\" THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND
+.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+.\" ARE DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR
+.\" ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+.\" STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+.\" IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+.\" POSSIBILITY OF SUCH DAMAGE.
+.\"
+.Dd August 4, 2009
+.Dt PRAUDIT 1
+.Os
+.Sh NAME
+.Nm praudit
+.Nd "print the contents of audit trail files"
+.Sh SYNOPSIS
+.Nm
+.Op Fl lnpx
+.Op Fl r | s
+.Op Fl d Ar del
+.Op Ar
+.Sh DESCRIPTION
+The
+.Nm
+utility prints the contents of the audit trail files to the standard output in
+human-readable form.
+If no
+.Ar file
+argument is specified, the standard input is used
+by default.
+.Pp
+The options are as follows:
+.Bl -tag -width indent
+.It Fl d Ar del
+Specifies the delimiter.
+The default delimiter is the comma.
+.It Fl l
+Prints the entire record on the same line.
+If this option is not specified,
+every token is displayed on a different line.
+.It Fl n
+Do not convert user and group IDs to their names but leave in their
+numeric forms.
+.It Fl p
+Specify this option if input to
+.Nm
+is piped from the
+.Xr tail 1
+utility.
+This causes
+.Nm
+to sync to the start of the next record.
+.It Fl r
+Prints the records in their raw, numeric form.
+This option is exclusive from
+.Fl s .
+.It Fl s
+Prints the tokens in their short form.
+Short text representations for
+record and event type are displayed.
+This option is exclusive from
+.Fl r .
+.It Fl x
+Print audit records in the XML output format.
+.El
+.Pp
+If the raw or short forms are not specified, the default is to print the tokens
+in their long form.
+Events are displayed as per their descriptions given in
+.Pa /etc/security/audit_event ;
+UIDs and GIDs are expanded to their names;
+dates and times are displayed in human-readable format.
+.Sh FILES
+.Bl -tag -width ".Pa /etc/security/audit_control" -compact
+.It Pa /etc/security/audit_class
+Descriptions of audit event classes.
+.It Pa /etc/security/audit_event
+Descriptions of audit events.
+.El
+.Sh SEE ALSO
+.Xr auditreduce 1 ,
+.Xr audit 4 ,
+.Xr auditpipe 4 ,
+.Xr audit_class 5 ,
+.Xr audit_event 5
+.Sh HISTORY
+The OpenBSM implementation was created by McAfee Research, the security
+division of McAfee Inc., under contract to Apple Computer Inc.\& in 2004.
+It was subsequently adopted by the TrustedBSD Project as the foundation for
+the OpenBSM distribution.
+.Sh AUTHORS
+.An -nosplit
+This software was created by McAfee Research, the security research division
+of McAfee, Inc., under contract to Apple Computer Inc.
+Additional authors include
+.An Wayne Salamon ,
+.An Robert Watson ,
+and SPARTA Inc.
+.Pp
+The Basic Security Module (BSM) interface to audit records and audit event
+stream format were defined by Sun Microsystems.
Deleted: vendor/openbsm/1.2_alpha4/bin/praudit/praudit.c
===================================================================
--- vendor/openbsm/dist/bin/praudit/praudit.c 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/bin/praudit/praudit.c 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,178 +0,0 @@
-/*
- * Copyright (c) 2004 Apple Computer, Inc.
- * Copyright (c) 2006 Martin Voros
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. Neither the name of Apple Computer, Inc. ("Apple") nor the names of
- * its contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR
- * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
- * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- * $P4: //depot/projects/trustedbsd/openbsm/bin/praudit/praudit.c#12 $
- */
-
-/*
- * Tool used to parse audit records conforming to the BSM structure.
- */
-
-/*
- * praudit [-lpx] [-r | -s] [-d del] [file ...]
- */
-
-#include <bsm/libbsm.h>
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <unistd.h>
-
-extern char *optarg;
-extern int optind, optopt, opterr,optreset;
-
-static char *del = ","; /* Default delimiter. */
-static int oneline = 0;
-static int raw = 0;
-static int shortfrm = 0;
-static int partial = 0;
-static int xml = 0;
-
-static void
-usage(void)
-{
-
- fprintf(stderr, "usage: praudit [-lpx] [-r | -s] [-d del] "
- "[file ...]\n");
- exit(1);
-}
-
-/*
- * Token printing for each token type .
- */
-static int
-print_tokens(FILE *fp)
-{
- u_char *buf;
- tokenstr_t tok;
- int reclen;
- int bytesread;
-
- /* Allow tail -f | praudit to work. */
- if (partial) {
- u_char type = 0;
- /* Record must begin with a header token. */
- do {
- type = fgetc(fp);
- } while(type != AU_HEADER_32_TOKEN);
- ungetc(type, fp);
- }
-
- while ((reclen = au_read_rec(fp, &buf)) != -1) {
- bytesread = 0;
- while (bytesread < reclen) {
- /* Is this an incomplete record? */
- if (-1 == au_fetch_tok(&tok, buf + bytesread,
- reclen - bytesread))
- break;
- if (xml)
- au_print_tok_xml(stdout, &tok, del, raw,
- shortfrm);
- else
- au_print_tok(stdout, &tok, del, raw,
- shortfrm);
- bytesread += tok.len;
- if (oneline) {
- if (!xml)
- printf("%s", del);
- } else
- printf("\n");
- }
- free(buf);
- if (oneline)
- printf("\n");
- fflush(stdout);
- }
- return (0);
-}
-
-int
-main(int argc, char **argv)
-{
- int ch;
- int i;
- FILE *fp;
-
- while ((ch = getopt(argc, argv, "d:lprsx")) != -1) {
- switch(ch) {
- case 'd':
- del = optarg;
- break;
-
- case 'l':
- oneline = 1;
- break;
-
- case 'p':
- partial = 1;
- break;
-
- case 'r':
- if (shortfrm)
- usage(); /* Exclusive from shortfrm. */
- raw = 1;
- break;
-
- case 's':
- if (raw)
- usage(); /* Exclusive from raw. */
- shortfrm = 1;
- break;
-
- case 'x':
- xml = 1;
- break;
-
- case '?':
- default:
- usage();
- }
- }
-
- if (xml)
- au_print_xml_header(stdout);
-
- /* For each of the files passed as arguments dump the contents. */
- if (optind == argc) {
- print_tokens(stdin);
- return (1);
- }
- for (i = optind; i < argc; i++) {
- fp = fopen(argv[i], "r");
- if ((fp == NULL) || (print_tokens(fp) == -1))
- perror(argv[i]);
- if (fp != NULL)
- fclose(fp);
- }
-
- if (xml)
- au_print_xml_footer(stdout);
-
- return (1);
-}
Copied: vendor/openbsm/1.2_alpha4/bin/praudit/praudit.c (from rev 11163, vendor/openbsm/dist/bin/praudit/praudit.c)
===================================================================
--- vendor/openbsm/1.2_alpha4/bin/praudit/praudit.c (rev 0)
+++ vendor/openbsm/1.2_alpha4/bin/praudit/praudit.c 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,173 @@
+/*-
+ * Copyright (c) 2004-2009 Apple Inc.
+ * Copyright (c) 2006 Martin Voros
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of Apple Inc. ("Apple") nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/*
+ * Tool used to parse audit records conforming to the BSM structure.
+ */
+
+/*
+ * praudit [-lnpx] [-r | -s] [-d del] [file ...]
+ */
+
+#include <bsm/libbsm.h>
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+
+extern char *optarg;
+extern int optind, optopt, opterr,optreset;
+
+static char *del = ","; /* Default delimiter. */
+static int oneline = 0;
+static int partial = 0;
+static int oflags = AU_OFLAG_NONE;
+
+static void
+usage(void)
+{
+
+ fprintf(stderr, "usage: praudit [-lnpx] [-r | -s] [-d del] "
+ "[file ...]\n");
+ exit(1);
+}
+
+/*
+ * Token printing for each token type .
+ */
+static int
+print_tokens(FILE *fp)
+{
+ u_char *buf;
+ tokenstr_t tok;
+ int reclen;
+ int bytesread;
+
+ /* Allow tail -f | praudit to work. */
+ if (partial) {
+ u_char type = 0;
+ /* Record must begin with a header token. */
+ do {
+ type = fgetc(fp);
+ } while(type != AUT_HEADER32);
+ ungetc(type, fp);
+ }
+
+ while ((reclen = au_read_rec(fp, &buf)) != -1) {
+ bytesread = 0;
+ while (bytesread < reclen) {
+ /* Is this an incomplete record? */
+ if (-1 == au_fetch_tok(&tok, buf + bytesread,
+ reclen - bytesread))
+ break;
+ au_print_flags_tok(stdout, &tok, del, oflags);
+ bytesread += tok.len;
+ if (oneline) {
+ if (!(oflags & AU_OFLAG_XML))
+ printf("%s", del);
+ } else
+ printf("\n");
+ }
+ free(buf);
+ if (oneline)
+ printf("\n");
+ fflush(stdout);
+ }
+ return (0);
+}
+
+int
+main(int argc, char **argv)
+{
+ int ch;
+ int i;
+ FILE *fp;
+
+ while ((ch = getopt(argc, argv, "d:lnprsx")) != -1) {
+ switch(ch) {
+ case 'd':
+ del = optarg;
+ break;
+
+ case 'l':
+ oneline = 1;
+ break;
+
+ case 'n':
+ oflags |= AU_OFLAG_NORESOLVE;
+ break;
+
+ case 'p':
+ partial = 1;
+ break;
+
+ case 'r':
+ if (oflags & AU_OFLAG_SHORT)
+ usage(); /* Exclusive from shortfrm. */
+ oflags |= AU_OFLAG_RAW;
+ break;
+
+ case 's':
+ if (oflags & AU_OFLAG_RAW)
+ usage(); /* Exclusive from raw. */
+ oflags |= AU_OFLAG_SHORT;
+ break;
+
+ case 'x':
+ oflags |= AU_OFLAG_XML;
+ break;
+
+ case '?':
+ default:
+ usage();
+ }
+ }
+
+ if (oflags & AU_OFLAG_XML)
+ au_print_xml_header(stdout);
+
+ /* For each of the files passed as arguments dump the contents. */
+ if (optind == argc) {
+ print_tokens(stdin);
+ return (1);
+ }
+ for (i = optind; i < argc; i++) {
+ fp = fopen(argv[i], "r");
+ if ((fp == NULL) || (print_tokens(fp) == -1))
+ perror(argv[i]);
+ if (fp != NULL)
+ fclose(fp);
+ }
+
+ if (oflags & AU_OFLAG_XML)
+ au_print_xml_footer(stdout);
+
+ return (1);
+}
Deleted: vendor/openbsm/1.2_alpha4/bsm/Makefile.am
===================================================================
--- vendor/openbsm/dist/bsm/Makefile.am 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/bsm/Makefile.am 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,15 +0,0 @@
-#
-# $P4: //depot/projects/trustedbsd/openbsm/bsm/Makefile.am#2 $
-#
-
-openbsmdir = $(includedir)/bsm
-
-openbsm_HEADERS = \
- audit.h \
- audit_filter.h \
- audit_internal.h \
- audit_kevents.h \
- audit_record.h \
- audit_uevents.h \
- libbsm.h
-
Copied: vendor/openbsm/1.2_alpha4/bsm/Makefile.am (from rev 11163, vendor/openbsm/dist/bsm/Makefile.am)
===================================================================
--- vendor/openbsm/1.2_alpha4/bsm/Makefile.am (rev 0)
+++ vendor/openbsm/1.2_alpha4/bsm/Makefile.am 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,8 @@
+openbsmdir = $(includedir)/bsm
+
+openbsm_HEADERS = \
+ audit_filter.h \
+ audit_uevents.h \
+ auditd_lib.h \
+ libbsm.h
+
Deleted: vendor/openbsm/1.2_alpha4/bsm/Makefile.in
===================================================================
--- vendor/openbsm/dist/bsm/Makefile.in 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/bsm/Makefile.in 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,412 +0,0 @@
-# Makefile.in generated by automake 1.10 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
- at SET_MAKE@
-
-#
-# $P4: //depot/projects/trustedbsd/openbsm/bsm/Makefile.in#5 $
-#
-
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = bsm
-DIST_COMMON = $(openbsm_HEADERS) $(srcdir)/Makefile.am \
- $(srcdir)/Makefile.in
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/config/config.h
-CONFIG_CLEAN_FILES =
-SOURCES =
-DIST_SOURCES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
-am__installdirs = "$(DESTDIR)$(openbsmdir)"
-openbsmHEADERS_INSTALL = $(INSTALL_HEADER)
-HEADERS = $(openbsm_HEADERS)
-ETAGS = etags
-CTAGS = ctags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AMTAR = @AMTAR@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO = @ECHO@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-F77 = @F77@
-FFLAGS = @FFLAGS@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-VERSION = @VERSION@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-openbsmdir = $(includedir)/bsm
-openbsm_HEADERS = \
- audit.h \
- audit_filter.h \
- audit_internal.h \
- audit_kevents.h \
- audit_record.h \
- audit_uevents.h \
- libbsm.h
-
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
- && exit 0; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign bsm/Makefile'; \
- cd $(top_srcdir) && \
- $(AUTOMAKE) --foreign bsm/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-install-openbsmHEADERS: $(openbsm_HEADERS)
- @$(NORMAL_INSTALL)
- test -z "$(openbsmdir)" || $(MKDIR_P) "$(DESTDIR)$(openbsmdir)"
- @list='$(openbsm_HEADERS)'; for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- f=$(am__strip_dir) \
- echo " $(openbsmHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(openbsmdir)/$$f'"; \
- $(openbsmHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(openbsmdir)/$$f"; \
- done
-
-uninstall-openbsmHEADERS:
- @$(NORMAL_UNINSTALL)
- @list='$(openbsm_HEADERS)'; for p in $$list; do \
- f=$(am__strip_dir) \
- echo " rm -f '$(DESTDIR)$(openbsmdir)/$$f'"; \
- rm -f "$(DESTDIR)$(openbsmdir)/$$f"; \
- done
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- mkid -fID $$unique
-tags: TAGS
-
-TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
- test -n "$$unique" || unique=$$empty_fix; \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$tags $$unique; \
- fi
-ctags: CTAGS
-CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(CTAGS_ARGS)$$tags$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$tags $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && cd $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) $$here
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
- fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
- else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(HEADERS)
-installdirs:
- for dir in "$(DESTDIR)$(openbsmdir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic clean-libtool mostlyclean-am
-
-distclean: distclean-am
- -rm -f Makefile
-distclean-am: clean-am distclean-generic distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-info: info-am
-
-info-am:
-
-install-data-am: install-openbsmHEADERS
-
-install-dvi: install-dvi-am
-
-install-exec-am:
-
-install-html: install-html-am
-
-install-info: install-info-am
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-ps: install-ps-am
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-openbsmHEADERS
-
-.MAKE: install-am install-strip
-
-.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
- clean-libtool ctags distclean distclean-generic \
- distclean-libtool distclean-tags distdir dvi dvi-am html \
- html-am info info-am install install-am install-data \
- install-data-am install-dvi install-dvi-am install-exec \
- install-exec-am install-html install-html-am install-info \
- install-info-am install-man install-openbsmHEADERS install-pdf \
- install-pdf-am install-ps install-ps-am install-strip \
- installcheck installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic \
- mostlyclean-libtool pdf pdf-am ps ps-am tags uninstall \
- uninstall-am uninstall-openbsmHEADERS
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
Copied: vendor/openbsm/1.2_alpha4/bsm/Makefile.in (from rev 11163, vendor/openbsm/dist/bsm/Makefile.in)
===================================================================
--- vendor/openbsm/1.2_alpha4/bsm/Makefile.in (rev 0)
+++ vendor/openbsm/1.2_alpha4/bsm/Makefile.in 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,508 @@
+# Makefile.in generated by automake 1.12.2 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2012 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+ at SET_MAKE@
+
+VPATH = @srcdir@
+am__make_dryrun = \
+ { \
+ am__dry=no; \
+ case $$MAKEFLAGS in \
+ *\\[\ \ ]*) \
+ echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
+ | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+ *) \
+ for am__flg in $$MAKEFLAGS; do \
+ case $$am__flg in \
+ *=*|--*) ;; \
+ *n*) am__dry=yes; break;; \
+ esac; \
+ done;; \
+ esac; \
+ test $$am__dry = yes; \
+ }
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+subdir = bsm
+DIST_COMMON = $(openbsm_HEADERS) $(srcdir)/Makefile.am \
+ $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+SOURCES =
+DIST_SOURCES =
+am__can_run_installinfo = \
+ case $$AM_UPDATE_INFO_DIR in \
+ n|no|NO) false;; \
+ *) (install-info --version) >/dev/null 2>&1;; \
+ esac
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+ *) f=$$p;; \
+ esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+ if (++n[$$2] == $(am__install_max)) \
+ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+ END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+ test -z "$$files" \
+ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+ $(am__cd) "$$dir" && rm -f $$files; }; \
+ }
+am__installdirs = "$(DESTDIR)$(openbsmdir)"
+HEADERS = $(openbsm_HEADERS)
+ETAGS = etags
+CTAGS = ctags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LEX = @LEX@
+LEXLIB = @LEXLIB@
+LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MIG = @MIG@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+VERSION = @VERSION@
+YACC = @YACC@
+YFLAGS = @YFLAGS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+openbsmdir = $(includedir)/bsm
+openbsm_HEADERS = \
+ audit_filter.h \
+ audit_uevents.h \
+ auditd_lib.h \
+ libbsm.h
+
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+ && { if test -f $@; then exit 0; else break; fi; }; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign bsm/Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --foreign bsm/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+
+mostlyclean-libtool:
+ -rm -f *.lo
+
+clean-libtool:
+ -rm -rf .libs _libs
+install-openbsmHEADERS: $(openbsm_HEADERS)
+ @$(NORMAL_INSTALL)
+ @list='$(openbsm_HEADERS)'; test -n "$(openbsmdir)" || list=; \
+ if test -n "$$list"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(openbsmdir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(openbsmdir)" || exit 1; \
+ fi; \
+ for p in $$list; do \
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; \
+ done | $(am__base_list) | \
+ while read files; do \
+ echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(openbsmdir)'"; \
+ $(INSTALL_HEADER) $$files "$(DESTDIR)$(openbsmdir)" || exit $$?; \
+ done
+
+uninstall-openbsmHEADERS:
+ @$(NORMAL_UNINSTALL)
+ @list='$(openbsm_HEADERS)'; test -n "$(openbsmdir)" || list=; \
+ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+ dir='$(DESTDIR)$(openbsmdir)'; $(am__uninstall_files_from_dir)
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ set x; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ shift; \
+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ if test $$# -gt 0; then \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ "$$@" $$unique; \
+ else \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$unique; \
+ fi; \
+ fi
+ctags: CTAGS
+CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ test -z "$(CTAGS_ARGS)$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && $(am__cd) $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) "$$here"
+
+cscopelist: $(HEADERS) $(SOURCES) $(LISP)
+ list='$(SOURCES) $(HEADERS) $(LISP)'; \
+ case "$(srcdir)" in \
+ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+ *) sdir=$(subdir)/$(srcdir) ;; \
+ esac; \
+ for i in $$list; do \
+ if test -f "$$i"; then \
+ echo "$(subdir)/$$i"; \
+ else \
+ echo "$$sdir/$$i"; \
+ fi; \
+ done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+ else \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+check: check-am
+all-am: Makefile $(HEADERS)
+installdirs:
+ for dir in "$(DESTDIR)$(openbsmdir)"; do \
+ test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+ done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+ if test -z '$(STRIP)'; then \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ install; \
+ else \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+ fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-am
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-openbsmHEADERS
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-openbsmHEADERS
+
+.MAKE: install-am install-strip
+
+.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
+ clean-libtool cscopelist ctags distclean distclean-generic \
+ distclean-libtool distclean-tags distdir dvi dvi-am html \
+ html-am info info-am install install-am install-data \
+ install-data-am install-dvi install-dvi-am install-exec \
+ install-exec-am install-html install-html-am install-info \
+ install-info-am install-man install-openbsmHEADERS install-pdf \
+ install-pdf-am install-ps install-ps-am install-strip \
+ installcheck installcheck-am installdirs maintainer-clean \
+ maintainer-clean-generic mostlyclean mostlyclean-generic \
+ mostlyclean-libtool pdf pdf-am ps ps-am tags uninstall \
+ uninstall-am uninstall-openbsmHEADERS
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
Deleted: vendor/openbsm/1.2_alpha4/bsm/audit_filter.h
===================================================================
--- vendor/openbsm/dist/bsm/audit_filter.h 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/bsm/audit_filter.h 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,83 +0,0 @@
-/*-
- * Copyright (c) 2006 Robert N. M. Watson
- * All rights reserved.
- *
- * This software was developed by Robert Watson for the TrustedBSD Project.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * $P4: //depot/projects/trustedbsd/openbsm/bsm/audit_filter.h#4 $
- */
-
-#ifndef _BSM_AUDIT_FILTER_H_
-#define _BSM_AUDIT_FILTER_H_
-
-/*
- * Module interface for audit filter modules.
- *
- * audit_filter_attach_t - filter module is being attached with arguments
- * audit_filter_reinit_t - arguments to module have changed
- * audit_filter_record_t - present parsed record to filter module, with
- * receipt time
- * audit_filter_rawrecord_t - present BSM format record to filter module,
- * with receipt time
- * audit_filter_destach_t - filter module is being detached
- *
- * There may be many instances of the same filter, identified by the instance
- * void pointer maintained by the filter instance.
- */
-typedef int (*audit_filter_attach_t)(void *instance, int argc, char *argv[]);
-typedef int (*audit_filter_reinit_t)(void *instance, int argc, char *argv[]);
-typedef void (*audit_filter_record_t)(void *instance, struct timespec *ts,
- int token_count, const tokenstr_t tok[]);
-typedef void (*audit_filter_rawrecord_t)(void *instance, struct timespec *ts,
- void *data, u_int len);
-typedef void (*audit_filter_detach_t)(void *instance);
-
-/*
- * APIs that may be called by audit filters.
- */
-void audit_filter_getcookie(void *instance, void **cookie);
-void audit_filter_setcookie(void *instance, void *cookie);
-
-/*
- * Values to be returned by audit_filter_init_t.
- */
-#define AUDIT_FILTER_SUCCESS (0)
-#define AUDIT_FILTER_FAILURE (-1)
-
-/*
- * Standard name for filter module initialization functions, which will be
- * found using dlsym().
- */
-#define AUDIT_FILTER_ATTACH audit_filter_attach
-#define AUDIT_FILTER_REINIT audit_filter_reinit
-#define AUDIT_FILTER_RECORD audit_filter_record
-#define AUDIT_FILTER_RAWRECORD audit_filter_rawrecord
-#define AUDIT_FILTER_DETACH audit_filter_detach
-#define AUDIT_FILTER_ATTACH_STRING "audit_filter_attach"
-#define AUDIT_FILTER_REINIT_STRING "audit_filter_reinit"
-#define AUDIT_FILTER_RECORD_STRING "audit_filter_record"
-#define AUDIT_FILTER_RAWRECORD_STRING "audit_filter_rawrecord"
-#define AUDIT_FILTER_DETACH_STRING "audit_filter_detach"
-
-#endif /* !_BSM_AUDIT_FILTER_H_ */
Copied: vendor/openbsm/1.2_alpha4/bsm/audit_filter.h (from rev 11163, vendor/openbsm/dist/bsm/audit_filter.h)
===================================================================
--- vendor/openbsm/1.2_alpha4/bsm/audit_filter.h (rev 0)
+++ vendor/openbsm/1.2_alpha4/bsm/audit_filter.h 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,81 @@
+/*-
+ * Copyright (c) 2006 Robert N. M. Watson
+ * All rights reserved.
+ *
+ * This software was developed by Robert Watson for the TrustedBSD Project.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#ifndef _BSM_AUDIT_FILTER_H_
+#define _BSM_AUDIT_FILTER_H_
+
+/*
+ * Module interface for audit filter modules.
+ *
+ * audit_filter_attach_t - filter module is being attached with arguments
+ * audit_filter_reinit_t - arguments to module have changed
+ * audit_filter_record_t - present parsed record to filter module, with
+ * receipt time
+ * audit_filter_rawrecord_t - present BSM format record to filter module,
+ * with receipt time
+ * audit_filter_destach_t - filter module is being detached
+ *
+ * There may be many instances of the same filter, identified by the instance
+ * void pointer maintained by the filter instance.
+ */
+typedef int (*audit_filter_attach_t)(void *instance, int argc, char *argv[]);
+typedef int (*audit_filter_reinit_t)(void *instance, int argc, char *argv[]);
+typedef void (*audit_filter_record_t)(void *instance, struct timespec *ts,
+ int token_count, const tokenstr_t tok[]);
+typedef void (*audit_filter_rawrecord_t)(void *instance, struct timespec *ts,
+ void *data, u_int len);
+typedef void (*audit_filter_detach_t)(void *instance);
+
+/*
+ * APIs that may be called by audit filters.
+ */
+void audit_filter_getcookie(void *instance, void **cookie);
+void audit_filter_setcookie(void *instance, void *cookie);
+
+/*
+ * Values to be returned by audit_filter_init_t.
+ */
+#define AUDIT_FILTER_SUCCESS (0)
+#define AUDIT_FILTER_FAILURE (-1)
+
+/*
+ * Standard name for filter module initialization functions, which will be
+ * found using dlsym().
+ */
+#define AUDIT_FILTER_ATTACH audit_filter_attach
+#define AUDIT_FILTER_REINIT audit_filter_reinit
+#define AUDIT_FILTER_RECORD audit_filter_record
+#define AUDIT_FILTER_RAWRECORD audit_filter_rawrecord
+#define AUDIT_FILTER_DETACH audit_filter_detach
+#define AUDIT_FILTER_ATTACH_STRING "audit_filter_attach"
+#define AUDIT_FILTER_REINIT_STRING "audit_filter_reinit"
+#define AUDIT_FILTER_RECORD_STRING "audit_filter_record"
+#define AUDIT_FILTER_RAWRECORD_STRING "audit_filter_rawrecord"
+#define AUDIT_FILTER_DETACH_STRING "audit_filter_detach"
+
+#endif /* !_BSM_AUDIT_FILTER_H_ */
Deleted: vendor/openbsm/1.2_alpha4/bsm/audit_uevents.h
===================================================================
--- vendor/openbsm/dist/bsm/audit_uevents.h 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/bsm/audit_uevents.h 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,102 +0,0 @@
-/*
- * Copyright (c) 2004 Apple Computer, Inc.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. Neither the name of Apple Computer, Inc. ("Apple") nor the names of
- * its contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR
- * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
- * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- * $P4: //depot/projects/trustedbsd/openbsm/bsm/audit_uevents.h#7 $
- */
-
-#ifndef _BSM_AUDIT_UEVENTS_H_
-#define _BSM_AUDIT_UEVENTS_H_
-
-/*-
- * User level audit event numbers
- *
- * Range of audit event numbers:
- * 0 Reserved, invalid
- * 1 - 2047 Reserved for kernel events
- * 2048 - 32767 Defined by BSM for user events
- * 32768 - 36864 Reserved for Mac OS-X applications
- * 36865 - 65535 Reserved for applications
- *
- */
-#define AUE_at_create 6144
-#define AUE_at_delete 6145
-#define AUE_at_perm 6146
-#define AUE_cron_invoke 6147
-#define AUE_crontab_create 6148
-#define AUE_crontab_delete 6149
-#define AUE_crontab_perm 6150
-#define AUE_inetd_connect 6151
-#define AUE_login 6152
-#define AUE_logout 6153
-#define AUE_telnet 6154
-#define AUE_rlogin 6155
-#define AUE_mountd_mount 6156
-#define AUE_mountd_umount 6157
-#define AUE_rshd 6158
-#define AUE_su 6159
-#define AUE_halt 6160
-#define AUE_reboot 6161
-#define AUE_rexecd 6162
-#define AUE_passwd 6163
-#define AUE_rexd 6164
-#define AUE_ftpd 6165
-#define AUE_init 6166
-#define AUE_uadmin 6167
-#define AUE_shutdown 6168
-#define AUE_poweroff 6169
-#define AUE_crontab_mod 6170
-#define AUE_audit_startup 6171
-#define AUE_audit_shutdown 6172
-#define AUE_allocate_succ 6200
-#define AUE_allocate_fail 6201
-#define AUE_deallocate_succ 6202
-#define AUE_deallocate_fail 6203
-#define AUE_listdevice_succ 6205
-#define AUE_listdevice_fail 6206
-#define AUE_create_user 6207
-#define AUE_modify_user 6208
-#define AUE_delete_user 6209
-#define AUE_disable_user 6210
-#define AUE_enable_user 6211
-#define AUE_sudo 6300
-#define AUE_modify_password 6501 /* Not assigned by Sun. */
-#define AUE_create_group 6511 /* Not assigned by Sun. */
-#define AUE_delete_group 6512 /* Not assigned by Sun. */
-#define AUE_modify_group 6513 /* Not assigned by Sun. */
-#define AUE_add_to_group 6514 /* Not assigned by Sun. */
-#define AUE_remove_from_group 6515 /* Not assigned by Sun. */
-#define AUE_revoke_obj 6521 /* Not assigned by Sun; not used. */
-#define AUE_lw_login 6600 /* Not assigned by Sun; tentative. */
-#define AUE_lw_logout 6601 /* Not assigned by Sun; tentative. */
-#define AUE_auth_user 7000 /* Not assigned by Sun. */
-#define AUE_ssconn 7001 /* Not assigned by Sun. */
-#define AUE_ssauthorize 7002 /* Not assigned by Sun. */
-#define AUE_ssauthint 7003 /* Not assigned by Sun. */
-#define AUE_openssh 32800
-
-#endif /* !_BSM_AUDIT_UEVENTS_H_ */
Copied: vendor/openbsm/1.2_alpha4/bsm/audit_uevents.h (from rev 11163, vendor/openbsm/dist/bsm/audit_uevents.h)
===================================================================
--- vendor/openbsm/1.2_alpha4/bsm/audit_uevents.h (rev 0)
+++ vendor/openbsm/1.2_alpha4/bsm/audit_uevents.h 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,141 @@
+/*-
+ * Copyright (c) 2004-2008 Apple Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of Apple Inc. ("Apple") nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _BSM_AUDIT_UEVENTS_H_
+#define _BSM_AUDIT_UEVENTS_H_
+
+/*
+ * Solaris userspace events.
+ */
+#define AUE_at_create 6144
+#define AUE_at_delete 6145
+#define AUE_at_perm 6146
+#define AUE_cron_invoke 6147
+#define AUE_crontab_create 6148
+#define AUE_crontab_delete 6149
+#define AUE_crontab_perm 6150
+#define AUE_inetd_connect 6151
+#define AUE_login 6152
+#define AUE_logout 6153
+#define AUE_telnet 6154
+#define AUE_rlogin 6155
+#define AUE_mountd_mount 6156
+#define AUE_mountd_umount 6157
+#define AUE_rshd 6158
+#define AUE_su 6159
+#define AUE_halt 6160
+#define AUE_reboot 6161
+#define AUE_rexecd 6162
+#define AUE_passwd 6163
+#define AUE_rexd 6164
+#define AUE_ftpd 6165
+#define AUE_init 6166
+#define AUE_uadmin 6167
+#define AUE_shutdown 6168
+#define AUE_poweroff 6169
+#define AUE_crontab_mod 6170
+#define AUE_ftpd_logout 6171
+#define AUE_ssh 6172
+#define AUE_role_login 6173
+#define AUE_prof_cmd 6180
+#define AUE_filesystem_add 6181
+#define AUE_filesystem_delete 6182
+#define AUE_filesystem_modify 6183
+#define AUE_allocate_succ 6200
+#define AUE_allocate_fail 6201
+#define AUE_deallocate_succ 6202
+#define AUE_deallocate_fail 6203
+#define AUE_listdevice_succ 6205
+#define AUE_listdevice_fail 6206
+#define AUE_create_user 6207
+#define AUE_modify_user 6208
+#define AUE_delete_user 6209
+#define AUE_disable_user 6210
+#define AUE_enable_user 6211
+#define AUE_newgrp_login 6212
+#define AUE_admin_authentication 6213
+#define AUE_kadmind_auth 6214
+#define AUE_kadmind_unauth 6215
+#define AUE_krb5kdc_as_req 6216
+#define AUE_krb5kdc_tgs_req 6217
+#define AUE_krb5kdc_tgs_req_2ndtktmm 6218
+#define AUE_krb5kdc_tgs_req_alt_tgt 6219
+
+/*
+ * Historic Darwin use of the low event numbering space, which collided with
+ * the Solaris event space. Now obsoleted and new, higher, event numbers
+ * assigned to make it easier to interpret Solaris events using the OpenBSM
+ * tools.
+ */
+#define AUE_DARWIN_audit_startup 6171
+#define AUE_DARWIN_audit_shutdown 6172
+#define AUE_DARWIN_sudo 6300
+#define AUE_DARWIN_modify_password 6501
+#define AUE_DARWIN_create_group 6511
+#define AUE_DARWIN_delete_group 6512
+#define AUE_DARWIN_modify_group 6513
+#define AUE_DARWIN_add_to_group 6514
+#define AUE_DARWIN_remove_from_group 6515
+#define AUE_DARWIN_revoke_obj 6521
+#define AUE_DARWIN_lw_login 6600
+#define AUE_DARWIN_lw_logout 6601
+#define AUE_DARWIN_auth_user 7000
+#define AUE_DARWIN_ssconn 7001
+#define AUE_DARWIN_ssauthorize 7002
+#define AUE_DARWIN_ssauthint 7003
+
+/*
+ * Historic/third-party appliation allocations of event idenfiers.
+ */
+#define AUE_openssh 32800
+
+/*
+ * OpenBSM-managed application event space.
+ */
+#define AUE_audit_startup 45000 /* Darwin-specific. */
+#define AUE_audit_shutdown 45001 /* Darwin-specific. */
+#define AUE_modify_password 45014 /* Darwin-specific. */
+#define AUE_create_group 45015 /* Darwin-specific. */
+#define AUE_delete_group 45016 /* Darwin-specific. */
+#define AUE_modify_group 45017 /* Darwin-specific. */
+#define AUE_add_to_group 45018 /* Darwin-specific. */
+#define AUE_remove_from_group 45019 /* Darwin-specific. */
+#define AUE_revoke_obj 45020 /* Darwin-specific. */
+#define AUE_lw_login 45021 /* Darwin-specific. */
+#define AUE_lw_logout 45022 /* Darwin-specific. */
+#define AUE_auth_user 45023 /* Darwin-specific. */
+#define AUE_ssconn 45024 /* Darwin-specific. */
+#define AUE_ssauthorize 45025 /* Darwin-specific. */
+#define AUE_ssauthint 45026 /* Darwin-specific. */
+#define AUE_calife 45027 /* OpenBSM-allocated. */
+#define AUE_sudo 45028 /* OpenBSM-allocated. */
+#define AUE_audit_recovery 45029 /* OpenBSM-allocated. */
+#define AUE_ssauthmech 45030 /* Darwin-specific. */
+
+#endif /* !_BSM_AUDIT_UEVENTS_H_ */
Copied: vendor/openbsm/1.2_alpha4/bsm/auditd_lib.h (from rev 11163, vendor/openbsm/dist/bsm/auditd_lib.h)
===================================================================
--- vendor/openbsm/1.2_alpha4/bsm/auditd_lib.h (rev 0)
+++ vendor/openbsm/1.2_alpha4/bsm/auditd_lib.h 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,108 @@
+/*-
+ * Copyright (c) 2008 Apple Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of Apple Inc. ("Apple") nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _BSM_AUDITD_LIB_H_
+#define _BSM_AUDITD_LIB_H_
+
+/*
+ * Lengths for audit trail file components.
+ */
+#define NOT_TERMINATED "not_terminated"
+#define CRASH_RECOVERY "crash_recovery"
+#define PREFIX_LEN (sizeof("YYYYMMDDhhmmss") - 1)
+#define POSTFIX_LEN PREFIX_LEN
+#define FILENAME_LEN (PREFIX_LEN + 1 + POSTFIX_LEN)
+#define TIMESTAMP_LEN POSTFIX_LEN
+
+/*
+ * Macro to generate the timestamp string for trail file.
+ */
+#define getTSstr(t, b, l) \
+ ( (((t) = time(0)) == (time_t)-1 ) || \
+ !strftime((b), (l), "%Y%m%d%H%M%S", gmtime(&(t)) ) ) ? -1 : 0
+
+/*
+ * The symbolic link to the currently active audit trail file.
+ */
+#define AUDIT_CURRENT_LINK "/var/audit/current"
+
+/*
+ * Path of auditd plist file for launchd.
+ */
+#define AUDITD_PLIST_FILE \
+ "/System/Library/LaunchDaemons/com.apple.auditd.plist"
+
+/*
+ * Error return codes for auditd_lib functions.
+ */
+#define ADE_NOERR 0 /* No Error or Success. */
+#define ADE_PARSE -1 /* Error parsing audit_control(5). */
+#define ADE_AUDITON -2 /* auditon(2) call failed. */
+#define ADE_NOMEM -3 /* Error allocating memory. */
+#define ADE_SOFTLIM -4 /* All audit log directories over soft limit. */
+#define ADE_HARDLIM -5 /* All audit log directories over hard limit. */
+#define ADE_STRERR -6 /* Error creating file name string. */
+#define ADE_AU_OPEN -7 /* au_open(3) failed. */
+#define ADE_AU_CLOSE -8 /* au_close(3) failed. */
+#define ADE_SETAUDIT -9 /* setaudit(2) or setaudit_addr(2) failed. */
+#define ADE_ACTL -10 /* "Soft" error with auditctl(2). */
+#define ADE_ACTLERR -11 /* "Hard" error with auditctl(2). */
+#define ADE_SWAPERR -12 /* The audit trail file could not be swap. */
+#define ADE_RENAME -13 /* Error renaming crash recovery file. */
+#define ADE_READLINK -14 /* Error reading 'current' link. */
+#define ADE_SYMLINK -15 /* Error creating 'current' link. */
+#define ADE_INVAL -16 /* Invalid argument. */
+#define ADE_GETADDR -17 /* Error resolving address from hostname. */
+#define ADE_ADDRFAM -18 /* Address family not supported. */
+#define ADE_EXPIRE -19 /* Error expiring audit trail files. */
+
+/*
+ * auditd_lib functions.
+ */
+const char *auditd_strerror(int errcode);
+int auditd_set_minfree(void);
+int auditd_expire_trails(int (*warn_expired)(char *));
+int auditd_read_dirs(int (*warn_soft)(char *), int (*warn_hard)(char *));
+void auditd_close_dirs(void);
+int auditd_set_dist(void);
+int auditd_set_evcmap(void);
+int auditd_set_namask(void);
+int auditd_set_policy(void);
+int auditd_set_fsize(void);
+int auditd_set_host(void);
+int auditd_swap_trail(char *TS, char **newfile, gid_t gid,
+ int (*warn_getacdir)(char *));
+int auditd_prevent_audit(void);
+int auditd_gen_record(int event, char *path);
+int auditd_new_curlink(char *curfile);
+int auditd_rename(const char *fromname, const char *toname);
+int audit_quick_start(void);
+int audit_quick_stop(void);
+
+#endif /* !_BSM_AUDITD_LIB_H_ */
Deleted: vendor/openbsm/1.2_alpha4/bsm/libbsm.h
===================================================================
--- vendor/openbsm/dist/bsm/libbsm.h 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/bsm/libbsm.h 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,1235 +0,0 @@
-/*
- * Copyright (c) 2004 Apple Computer, Inc.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. Neither the name of Apple Computer, Inc. ("Apple") nor the names of
- * its contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR
- * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
- * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- * $P4: //depot/projects/trustedbsd/openbsm/bsm/libbsm.h#33 $
- */
-
-#ifndef _LIBBSM_H_
-#define _LIBBSM_H_
-
-/*
- * NB: definitions, etc., marked with "OpenSSH compatibility" were introduced
- * solely to allow OpenSSH to compile; Darwin/Apple code should not use them.
- */
-
-#include <sys/types.h>
-#include <sys/cdefs.h>
-
-#include <inttypes.h> /* Required for audit.h. */
-#include <time.h> /* Required for clock_t on Linux. */
-
-#include <bsm/audit.h>
-#include <bsm/audit_record.h>
-
-#include <stdio.h>
-
-#ifdef __APPLE__
-#include <mach/mach.h> /* audit_token_t */
-#endif
-
-/*
- * Size parsed token vectors for execve(2) arguments and environmental
- * variables. Note: changing these sizes affects the ABI of the token
- * structure, and as the token structure is often placed in the caller stack,
- * this is undesirable.
- */
-#define AUDIT_MAX_ARGS 128
-#define AUDIT_MAX_ENV 128
-
-/*
- * Arguments to au_preselect(3).
- */
-#define AU_PRS_USECACHE 0
-#define AU_PRS_REREAD 1
-
-#define AU_PRS_SUCCESS 1
-#define AU_PRS_FAILURE 2
-#define AU_PRS_BOTH (AU_PRS_SUCCESS|AU_PRS_FAILURE)
-
-#define AUDIT_EVENT_FILE "/etc/security/audit_event"
-#define AUDIT_CLASS_FILE "/etc/security/audit_class"
-#define AUDIT_CONTROL_FILE "/etc/security/audit_control"
-#define AUDIT_USER_FILE "/etc/security/audit_user"
-
-#define DIR_CONTROL_ENTRY "dir"
-#define MINFREE_CONTROL_ENTRY "minfree"
-#define FILESZ_CONTROL_ENTRY "filesz"
-#define FLAGS_CONTROL_ENTRY "flags"
-#define NA_CONTROL_ENTRY "naflags"
-#define POLICY_CONTROL_ENTRY "policy"
-
-#define AU_CLASS_NAME_MAX 8
-#define AU_CLASS_DESC_MAX 72
-#define AU_EVENT_NAME_MAX 30
-#define AU_EVENT_DESC_MAX 50
-#define AU_USER_NAME_MAX 50
-#define AU_LINE_MAX 256
-#define MAX_AUDITSTRING_LEN 256
-#define BSM_TEXTBUFSZ MAX_AUDITSTRING_LEN /* OpenSSH compatibility */
-
-/*
- * Arguments to au_close(3).
- */
-#define AU_TO_NO_WRITE 0 /* Abandon audit record. */
-#define AU_TO_WRITE 1 /* Commit audit record. */
-
-__BEGIN_DECLS
-struct au_event_ent {
- au_event_t ae_number;
- char *ae_name;
- char *ae_desc;
- au_class_t ae_class;
-};
-typedef struct au_event_ent au_event_ent_t;
-
-struct au_class_ent {
- char *ac_name;
- au_class_t ac_class;
- char *ac_desc;
-};
-typedef struct au_class_ent au_class_ent_t;
-
-struct au_user_ent {
- char *au_name;
- au_mask_t au_always;
- au_mask_t au_never;
-};
-typedef struct au_user_ent au_user_ent_t;
-__END_DECLS
-
-#define ADD_TO_MASK(m, c, sel) do { \
- if (sel & AU_PRS_SUCCESS) \
- (m)->am_success |= c; \
- if (sel & AU_PRS_FAILURE) \
- (m)->am_failure |= c; \
-} while (0)
-
-#define SUB_FROM_MASK(m, c, sel) do { \
- if (sel & AU_PRS_SUCCESS) \
- (m)->am_success &= ((m)->am_success ^ c); \
- if (sel & AU_PRS_FAILURE) \
- (m)->am_failure &= ((m)->am_failure ^ c); \
-} while (0)
-
-#define ADDMASK(m, v) do { \
- (m)->am_success |= (v)->am_success; \
- (m)->am_failure |= (v)->am_failure; \
-} while(0)
-
-#define SUBMASK(m, v) do { \
- (m)->am_success &= ((m)->am_success ^ (v)->am_success); \
- (m)->am_failure &= ((m)->am_failure ^ (v)->am_failure); \
-} while(0)
-
-__BEGIN_DECLS
-
-typedef struct au_tid32 {
- u_int32_t port;
- u_int32_t addr;
-} au_tid32_t;
-
-typedef struct au_tid64 {
- u_int64_t port;
- u_int32_t addr;
-} au_tid64_t;
-
-typedef struct au_tidaddr32 {
- u_int32_t port;
- u_int32_t type;
- u_int32_t addr[4];
-} au_tidaddr32_t;
-
-typedef struct au_tidaddr64 {
- u_int64_t port;
- u_int32_t type;
- u_int32_t addr[4];
-} au_tidaddr64_t;
-
-/*
- * argument # 1 byte
- * argument value 4 bytes/8 bytes (32-bit/64-bit value)
- * text length 2 bytes
- * text N bytes + 1 terminating NULL byte
- */
-typedef struct {
- u_char no;
- u_int32_t val;
- u_int16_t len;
- char *text;
-} au_arg32_t;
-
-typedef struct {
- u_char no;
- u_int64_t val;
- u_int16_t len;
- char *text;
-} au_arg64_t;
-
-/*
- * how to print 1 byte
- * basic unit 1 byte
- * unit count 1 byte
- * data items (depends on basic unit)
- */
-typedef struct {
- u_char howtopr;
- u_char bu;
- u_char uc;
- u_char *data;
-} au_arb_t;
-
-/*
- * file access mode 4 bytes
- * owner user ID 4 bytes
- * owner group ID 4 bytes
- * file system ID 4 bytes
- * node ID 8 bytes
- * device 4 bytes/8 bytes (32-bit/64-bit)
- */
-typedef struct {
- u_int32_t mode;
- u_int32_t uid;
- u_int32_t gid;
- u_int32_t fsid;
- u_int64_t nid;
- u_int32_t dev;
-} au_attr32_t;
-
-typedef struct {
- u_int32_t mode;
- u_int32_t uid;
- u_int32_t gid;
- u_int32_t fsid;
- u_int64_t nid;
- u_int64_t dev;
-} au_attr64_t;
-
-/*
- * count 4 bytes
- * text count null-terminated string(s)
- */
-typedef struct {
- u_int32_t count;
- char *text[AUDIT_MAX_ARGS];
-} au_execarg_t;
-
-/*
- * count 4 bytes
- * text count null-terminated string(s)
- */
-typedef struct {
- u_int32_t count;
- char *text[AUDIT_MAX_ENV];
-} au_execenv_t;
-
-/*
- * status 4 bytes
- * return value 4 bytes
- */
-typedef struct {
- u_int32_t status;
- u_int32_t ret;
-} au_exit_t;
-
-/*
- * seconds of time 4 bytes
- * milliseconds of time 4 bytes
- * file name length 2 bytes
- * file pathname N bytes + 1 terminating NULL byte
- */
-typedef struct {
- u_int32_t s;
- u_int32_t ms;
- u_int16_t len;
- char *name;
-} au_file_t;
-
-
-/*
- * number groups 2 bytes
- * group list N * 4 bytes
- */
-typedef struct {
- u_int16_t no;
- u_int32_t list[AUDIT_MAX_GROUPS];
-} au_groups_t;
-
-/*
- * record byte count 4 bytes
- * version # 1 byte [2]
- * event type 2 bytes
- * event modifier 2 bytes
- * seconds of time 4 bytes/8 bytes (32-bit/64-bit value)
- * milliseconds of time 4 bytes/8 bytes (32-bit/64-bit value)
- */
-typedef struct {
- u_int32_t size;
- u_char version;
- u_int16_t e_type;
- u_int16_t e_mod;
- u_int32_t s;
- u_int32_t ms;
-} au_header32_t;
-
-/*
- * record byte count 4 bytes
- * version # 1 byte [2]
- * event type 2 bytes
- * event modifier 2 bytes
- * address type/length 1 byte (XXX: actually, 4 bytes)
- * machine address 4 bytes/16 bytes (IPv4/IPv6 address)
- * seconds of time 4 bytes/8 bytes (32/64-bits)
- * nanoseconds of time 4 bytes/8 bytes (32/64-bits)
- */
-typedef struct {
- u_int32_t size;
- u_char version;
- u_int16_t e_type;
- u_int16_t e_mod;
- u_int32_t ad_type;
- u_int32_t addr[4];
- u_int32_t s;
- u_int32_t ms;
-} au_header32_ex_t;
-
-typedef struct {
- u_int32_t size;
- u_char version;
- u_int16_t e_type;
- u_int16_t e_mod;
- u_int64_t s;
- u_int64_t ms;
-} au_header64_t;
-
-typedef struct {
- u_int32_t size;
- u_char version;
- u_int16_t e_type;
- u_int16_t e_mod;
- u_int32_t ad_type;
- u_int32_t addr[4];
- u_int64_t s;
- u_int64_t ms;
-} au_header64_ex_t;
-
-/*
- * internet address 4 bytes
- */
-typedef struct {
- u_int32_t addr;
-} au_inaddr_t;
-
-/*
- * type 4 bytes
- * internet address 16 bytes
- */
-typedef struct {
- u_int32_t type;
- u_int32_t addr[4];
-} au_inaddr_ex_t;
-
-/*
- * version and ihl 1 byte
- * type of service 1 byte
- * length 2 bytes
- * id 2 bytes
- * offset 2 bytes
- * ttl 1 byte
- * protocol 1 byte
- * checksum 2 bytes
- * source address 4 bytes
- * destination address 4 bytes
- */
-typedef struct {
- u_char version;
- u_char tos;
- u_int16_t len;
- u_int16_t id;
- u_int16_t offset;
- u_char ttl;
- u_char prot;
- u_int16_t chksm;
- u_int32_t src;
- u_int32_t dest;
-} au_ip_t;
-
-/*
- * object ID type 1 byte
- * object ID 4 bytes
- */
-typedef struct {
- u_char type;
- u_int32_t id;
-} au_ipc_t;
-
-/*
- * owner user ID 4 bytes
- * owner group ID 4 bytes
- * creator user ID 4 bytes
- * creator group ID 4 bytes
- * access mode 4 bytes
- * slot sequence # 4 bytes
- * key 4 bytes
- */
-typedef struct {
- u_int32_t uid;
- u_int32_t gid;
- u_int32_t puid;
- u_int32_t pgid;
- u_int32_t mode;
- u_int32_t seq;
- u_int32_t key;
-} au_ipcperm_t;
-
-/*
- * port IP address 2 bytes
- */
-typedef struct {
- u_int16_t port;
-} au_iport_t;
-
-/*
- * length 2 bytes
- * data length bytes
- */
-typedef struct {
- u_int16_t size;
- char *data;
-} au_opaque_t;
-
-/*
- * path length 2 bytes
- * path N bytes + 1 terminating NULL byte
- */
-typedef struct {
- u_int16_t len;
- char *path;
-} au_path_t;
-
-/*
- * audit ID 4 bytes
- * effective user ID 4 bytes
- * effective group ID 4 bytes
- * real user ID 4 bytes
- * real group ID 4 bytes
- * process ID 4 bytes
- * session ID 4 bytes
- * terminal ID
- * port ID 4 bytes/8 bytes (32-bit/64-bit value)
- * machine address 4 bytes
- */
-typedef struct {
- u_int32_t auid;
- u_int32_t euid;
- u_int32_t egid;
- u_int32_t ruid;
- u_int32_t rgid;
- u_int32_t pid;
- u_int32_t sid;
- au_tid32_t tid;
-} au_proc32_t;
-
-typedef struct {
- u_int32_t auid;
- u_int32_t euid;
- u_int32_t egid;
- u_int32_t ruid;
- u_int32_t rgid;
- u_int32_t pid;
- u_int32_t sid;
- au_tid64_t tid;
-} au_proc64_t;
-
-/*
- * audit ID 4 bytes
- * effective user ID 4 bytes
- * effective group ID 4 bytes
- * real user ID 4 bytes
- * real group ID 4 bytes
- * process ID 4 bytes
- * session ID 4 bytes
- * terminal ID
- * port ID 4 bytes/8 bytes (32-bit/64-bit value)
- * type 4 bytes
- * machine address 16 bytes
- */
-typedef struct {
- u_int32_t auid;
- u_int32_t euid;
- u_int32_t egid;
- u_int32_t ruid;
- u_int32_t rgid;
- u_int32_t pid;
- u_int32_t sid;
- au_tidaddr32_t tid;
-} au_proc32ex_t;
-
-typedef struct {
- u_int32_t auid;
- u_int32_t euid;
- u_int32_t egid;
- u_int32_t ruid;
- u_int32_t rgid;
- u_int32_t pid;
- u_int32_t sid;
- au_tidaddr64_t tid;
-} au_proc64ex_t;
-
-/*
- * error status 1 byte
- * return value 4 bytes/8 bytes (32-bit/64-bit value)
- */
-typedef struct {
- u_char status;
- u_int32_t ret;
-} au_ret32_t;
-
-typedef struct {
- u_char err;
- u_int64_t val;
-} au_ret64_t;
-
-/*
- * sequence number 4 bytes
- */
-typedef struct {
- u_int32_t seqno;
-} au_seq_t;
-
-/*
- * socket type 2 bytes
- * local port 2 bytes
- * local Internet address 4 bytes
- * remote port 2 bytes
- * remote Internet address 4 bytes
- */
-typedef struct {
- u_int16_t type;
- u_int16_t l_port;
- u_int32_t l_addr;
- u_int16_t r_port;
- u_int32_t r_addr;
-} au_socket_t;
-
-/*
- * socket type 2 bytes
- * local port 2 bytes
- * address type/length 4 bytes
- * local Internet address 4 bytes/16 bytes (IPv4/IPv6 address)
- * remote port 4 bytes
- * address type/length 4 bytes
- * remote Internet address 4 bytes/16 bytes (IPv4/IPv6 address)
- */
-typedef struct {
- u_int16_t type;
- u_int16_t l_port;
- u_int32_t l_ad_type;
- u_int32_t l_addr;
- u_int32_t r_port;
- u_int32_t r_ad_type;
- u_int32_t r_addr;
-} au_socket_ex32_t;
-
-/*
- * socket family 2 bytes
- * local port 2 bytes
- * socket address 4 bytes/16 bytes (IPv4/IPv6 address)
- */
-typedef struct {
- u_int16_t family;
- u_int16_t port;
- u_int32_t addr;
-} au_socketinet32_t;
-
-/*
- * socket family 2 bytes
- * path 104 bytes
- */
-typedef struct {
- u_int16_t family;
- char path[104];
-} au_socketunix_t;
-
-/*
- * audit ID 4 bytes
- * effective user ID 4 bytes
- * effective group ID 4 bytes
- * real user ID 4 bytes
- * real group ID 4 bytes
- * process ID 4 bytes
- * session ID 4 bytes
- * terminal ID
- * port ID 4 bytes/8 bytes (32-bit/64-bit value)
- * machine address 4 bytes
- */
-typedef struct {
- u_int32_t auid;
- u_int32_t euid;
- u_int32_t egid;
- u_int32_t ruid;
- u_int32_t rgid;
- u_int32_t pid;
- u_int32_t sid;
- au_tid32_t tid;
-} au_subject32_t;
-
-typedef struct {
- u_int32_t auid;
- u_int32_t euid;
- u_int32_t egid;
- u_int32_t ruid;
- u_int32_t rgid;
- u_int32_t pid;
- u_int32_t sid;
- au_tid64_t tid;
-} au_subject64_t;
-
-/*
- * audit ID 4 bytes
- * effective user ID 4 bytes
- * effective group ID 4 bytes
- * real user ID 4 bytes
- * real group ID 4 bytes
- * process ID 4 bytes
- * session ID 4 bytes
- * terminal ID
- * port ID 4 bytes/8 bytes (32-bit/64-bit value)
- * type 4 bytes
- * machine address 16 bytes
- */
-typedef struct {
- u_int32_t auid;
- u_int32_t euid;
- u_int32_t egid;
- u_int32_t ruid;
- u_int32_t rgid;
- u_int32_t pid;
- u_int32_t sid;
- au_tidaddr32_t tid;
-} au_subject32ex_t;
-
-typedef struct {
- u_int32_t auid;
- u_int32_t euid;
- u_int32_t egid;
- u_int32_t ruid;
- u_int32_t rgid;
- u_int32_t pid;
- u_int32_t sid;
- au_tidaddr64_t tid;
-} au_subject64ex_t;
-
-/*
- * text length 2 bytes
- * text N bytes + 1 terminating NULL byte
- */
-typedef struct {
- u_int16_t len;
- char *text;
-} au_text_t;
-
-/*
- * zonename length 2 bytes
- * zonename text N bytes + 1 NULL terminator
- */
-typedef struct {
- u_int16_t len;
- char *zonename;
-} au_zonename_t;
-
-typedef struct {
- u_int32_t ident;
- u_int16_t filter;
- u_int16_t flags;
- u_int32_t fflags;
- u_int32_t data;
-} au_kevent_t;
-
-typedef struct {
- u_int16_t length;
- char *data;
-} au_invalid_t;
-
-/*
- * trailer magic number 2 bytes
- * record byte count 4 bytes
- */
-typedef struct {
- u_int16_t magic;
- u_int32_t count;
-} au_trailer_t;
-
-struct tokenstr {
- u_char id;
- u_char *data;
- size_t len;
- union {
- au_arg32_t arg32;
- au_arg64_t arg64;
- au_arb_t arb;
- au_attr32_t attr32;
- au_attr64_t attr64;
- au_execarg_t execarg;
- au_execenv_t execenv;
- au_exit_t exit;
- au_file_t file;
- au_groups_t grps;
- au_header32_t hdr32;
- au_header32_ex_t hdr32_ex;
- au_header64_t hdr64;
- au_header64_ex_t hdr64_ex;
- au_inaddr_t inaddr;
- au_inaddr_ex_t inaddr_ex;
- au_ip_t ip;
- au_ipc_t ipc;
- au_ipcperm_t ipcperm;
- au_iport_t iport;
- au_opaque_t opaque;
- au_path_t path;
- au_proc32_t proc32;
- au_proc32ex_t proc32_ex;
- au_proc64_t proc64;
- au_proc64ex_t proc64_ex;
- au_ret32_t ret32;
- au_ret64_t ret64;
- au_seq_t seq;
- au_socket_t socket;
- au_socket_ex32_t socket_ex32;
- au_socketinet32_t sockinet32;
- au_socketunix_t sockunix;
- au_subject32_t subj32;
- au_subject32ex_t subj32_ex;
- au_subject64_t subj64;
- au_subject64ex_t subj64_ex;
- au_text_t text;
- au_kevent_t kevent;
- au_invalid_t invalid;
- au_trailer_t trail;
- au_zonename_t zonename;
- } tt; /* The token is one of the above types */
-};
-
-typedef struct tokenstr tokenstr_t;
-
-int audit_submit(short au_event, au_id_t auid,
- char status, int reterr, const char *fmt, ...);
-
-/*
- * Functions relating to querying audit class information.
- */
-void setauclass(void);
-void endauclass(void);
-struct au_class_ent *getauclassent(void);
-struct au_class_ent *getauclassent_r(au_class_ent_t *class_int);
-struct au_class_ent *getauclassnam(const char *name);
-struct au_class_ent *getauclassnam_r(au_class_ent_t *class_int,
- const char *name);
-struct au_class_ent *getauclassnum(au_class_t class_number);
-struct au_class_ent *getauclassnum_r(au_class_ent_t *class_int,
- au_class_t class_number);
-
-/*
- * Functions relating to querying audit control information.
- */
-void setac(void);
-void endac(void);
-int getacdir(char *name, int len);
-int getacmin(int *min_val);
-int getacfilesz(size_t *size_val);
-int getacflg(char *auditstr, int len);
-int getacna(char *auditstr, int len);
-int getacpol(char *auditstr, size_t len);
-int getauditflagsbin(char *auditstr, au_mask_t *masks);
-int getauditflagschar(char *auditstr, au_mask_t *masks,
- int verbose);
-int au_preselect(au_event_t event, au_mask_t *mask_p,
- int sorf, int flag);
-ssize_t au_poltostr(long policy, size_t maxsize, char *buf);
-int au_strtopol(const char *polstr, long *policy);
-
-/*
- * Functions relating to querying audit event information.
- */
-void setauevent(void);
-void endauevent(void);
-struct au_event_ent *getauevent(void);
-struct au_event_ent *getauevent_r(struct au_event_ent *e);
-struct au_event_ent *getauevnam(const char *name);
-struct au_event_ent *getauevnam_r(struct au_event_ent *e,
- const char *name);
-struct au_event_ent *getauevnum(au_event_t event_number);
-struct au_event_ent *getauevnum_r(struct au_event_ent *e,
- au_event_t event_number);
-au_event_t *getauevnonam(const char *event_name);
-au_event_t *getauevnonam_r(au_event_t *ev,
- const char *event_name);
-
-/*
- * Functions relating to querying audit user information.
- */
-void setauuser(void);
-void endauuser(void);
-struct au_user_ent *getauuserent(void);
-struct au_user_ent *getauuserent_r(struct au_user_ent *u);
-struct au_user_ent *getauusernam(const char *name);
-struct au_user_ent *getauusernam_r(struct au_user_ent *u,
- const char *name);
-int au_user_mask(char *username, au_mask_t *mask_p);
-int getfauditflags(au_mask_t *usremask,
- au_mask_t *usrdmask, au_mask_t *lastmask);
-
-/*
- * Functions for reading and printing records and tokens from audit trails.
- */
-int au_read_rec(FILE *fp, u_char **buf);
-int au_fetch_tok(tokenstr_t *tok, u_char *buf, int len);
-//XXX The following interface has different prototype from BSM
-void au_print_tok(FILE *outfp, tokenstr_t *tok,
- char *del, char raw, char sfrm);
-void au_print_tok_xml(FILE *outfp, tokenstr_t *tok,
- char *del, char raw, char sfrm);
-
-/*
- * Functions relating to XML output.
- */
-void au_print_xml_header(FILE *outfp);
-void au_print_xml_footer(FILE *outfp);
-__END_DECLS
-
-/*
- * The remaining APIs are associated with Apple's BSM implementation, in
- * particular as relates to Mach IPC auditing and triggers passed via Mach
- * IPC.
- */
-#ifdef __APPLE__
-#include <sys/appleapiopts.h>
-
-/**************************************************************************
- **************************************************************************
- ** The following definitions, functions, etc., are NOT officially
- ** supported: they may be changed or removed in the future. Do not use
- ** them unless you are prepared to cope with that eventuality.
- **************************************************************************
- **************************************************************************/
-
-#ifdef __APPLE_API_PRIVATE
-#define __BSM_INTERNAL_NOTIFY_KEY "com.apple.audit.change"
-#endif /* __APPLE_API_PRIVATE */
-
-/*
- * au_get_state() return values
- * XXX use AUC_* values directly instead (<bsm/audit.h>); AUDIT_OFF and
- * AUDIT_ON are deprecated and WILL be removed.
- */
-#ifdef __APPLE_API_PRIVATE
-#define AUDIT_OFF AUC_NOAUDIT
-#define AUDIT_ON AUC_AUDITING
-#endif /* __APPLE_API_PRIVATE */
-#endif /* !__APPLE__ */
-
-/*
- * Error return codes for audit_set_terminal_id(), audit_write() and its
- * brethren. We have 255 (not including kAUNoErr) to play with.
- *
- * XXXRW: In Apple's bsm-8, these are marked __APPLE_API_PRIVATE.
- */
-enum {
- kAUNoErr = 0,
- kAUBadParamErr = -66049,
- kAUStatErr,
- kAUSysctlErr,
- kAUOpenErr,
- kAUMakeSubjectTokErr,
- kAUWriteSubjectTokErr,
- kAUWriteCallerTokErr,
- kAUMakeReturnTokErr,
- kAUWriteReturnTokErr,
- kAUCloseErr,
- kAUMakeTextTokErr,
- kAULastErr
-};
-
-#ifdef __APPLE__
-/*
- * Error return codes for au_get_state() and/or its private support
- * functions. These codes are designed to be compatible with the
- * NOTIFY_STATUS_* codes defined in <notify.h> but non-overlapping.
- * Any changes to notify(3) may cause these values to change in future.
- *
- * AU_UNIMPL should never happen unless you've changed your system software
- * without rebooting. Shame on you.
- */
-#ifdef __APPLE_API_PRIVATE
-#define AU_UNIMPL NOTIFY_STATUS_FAILED + 1 /* audit unimplemented */
-#endif /* __APPLE_API_PRIVATE */
-#endif /* !__APPLE__ */
-
-__BEGIN_DECLS
-/*
- * XXX This prototype should be in audit_record.h
- *
- * au_free_token()
- *
- * @summary - au_free_token() deallocates a token_t created by any of
- * the au_to_*() BSM API functions.
- *
- * The BSM API generally manages deallocation of token_t objects. However,
- * if au_write() is passed a bad audit descriptor, the token_t * parameter
- * will be left untouched. In that case, the caller can deallocate the
- * token_t using au_free_token() if desired. This is, in fact, what
- * audit_write() does, in keeping with the existing memory management model
- * of the BSM API.
- *
- * @param tok - A token_t * generated by one of the au_to_*() BSM API
- * calls. For convenience, tok may be NULL, in which case
- * au_free_token() returns immediately.
- *
- * XXXRW: In Apple's bsm-8, these are marked __APPLE_API_PRIVATE.
- */
-void au_free_token(token_t *tok);
-
-/*
- * Lightweight check to determine if auditing is enabled. If a client
- * wants to use this to govern whether an entire series of audit calls
- * should be made--as in the common case of a caller building a set of
- * tokens, then writing them--it should cache the audit status in a local
- * variable. This call always returns the current state of auditing.
- *
- * @return - AUC_AUDITING or AUC_NOAUDIT if no error occurred.
- * Otherwise the function can return any of the errno values defined for
- * setaudit(2), or AU_UNIMPL if audit does not appear to be supported by
- * the system.
- *
- * XXXRW: In Apple's bsm-8, these are marked __APPLE_API_PRIVATE.
- */
-int au_get_state(void);
-__END_DECLS
-
-/* OpenSSH compatibility */
-int cannot_audit(int);
-
-__BEGIN_DECLS
-/*
- * audit_set_terminal_id()
- *
- * @summary - audit_set_terminal_id() fills in an au_tid_t struct, which is
- * used in audit session initialization by processes like /usr/bin/login.
- *
- * @param tid - A pointer to an au_tid_t struct.
- *
- * @return - kAUNoErr on success; kAUBadParamErr if tid is NULL, kAUStatErr
- * or kAUSysctlErr if one of the underlying system calls fails (a message
- * is sent to the system log in those cases).
- *
- * XXXRW: In Apple's bsm-8, these are marked __APPLE_API_PRIVATE.
- */
-int audit_set_terminal_id(au_tid_t *tid);
-
-/*
- * BEGIN au_write() WRAPPERS
- *
- * The following calls all wrap the existing BSM API. They use the
- * provided subject information, if any, to construct the subject token
- * required for every log message. They use the provided return/error
- * value(s), if any, to construct the success/failure indication required
- * for every log message. They only permit one "miscellaneous" token,
- * which should contain the event-specific logging information mandated by
- * CAPP.
- *
- * All these calls assume the caller has previously determined that
- * auditing is enabled by calling au_get_state().
- */
-
-/*
- * audit_write()
- *
- * @summary - audit_write() is the basis for the other audit_write_*()
- * calls. Performs a basic write of an audit record (subject, additional
- * info, success/failure). Note that this call only permits logging one
- * caller-specified token; clients needing to log more flexibly must use
- * the existing BSM API (au_open(), et al.) directly.
- *
- * Note on memory management: audit_write() guarantees that the token_t *s
- * passed to it will be deallocated whether or not the underlying write to
- * the audit log succeeded. This addresses an inconsistency in the
- * underlying BSM API in which token_t *s are usually but not always
- * deallocated.
- *
- * @param event_code - The code for the event being logged. This should
- * be one of the AUE_ values in /usr/include/bsm/audit_uevents.h.
- *
- * @param subject - A token_t * generated by au_to_subject(),
- * au_to_subject32(), au_to_subject64(), or au_to_me(). If no subject is
- * required, subject should be NULL.
- *
- * @param misctok - A token_t * generated by one of the au_to_*() BSM API
- * calls. This should correspond to the additional information required by
- * CAPP for the event being audited. If no additional information is
- * required, misctok should be NULL.
- *
- * @param retval - The return value to be logged for this event. This
- * should be 0 (zero) for success, otherwise the value is event-specific.
- *
- * @param errcode - Any error code associated with the return value (e.g.,
- * errno or h_errno). If there was no error, errcode should be 0 (zero).
- *
- * @return - The status of the call: 0 (zero) on success, else one of the
- * kAU*Err values defined above.
- *
- * XXXRW: In Apple's bsm-8, these are marked __APPLE_API_PRIVATE.
- */
-int audit_write(short event_code, token_t *subject, token_t *misctok,
- char retval, int errcode);
-
-/*
- * audit_write_success()
- *
- * @summary - audit_write_success() records an auditable event that did not
- * encounter an error. The interface is designed to require as little
- * direct use of the au_to_*() API as possible. It builds a subject token
- * from the information passed in and uses that to invoke audit_write().
- * A subject, as defined by CAPP, is a process acting on the user's behalf.
- *
- * If the subject information is the same as the current process, use
- * au_write_success_self().
- *
- * @param event_code - The code for the event being logged. This should
- * be one of the AUE_ values in /usr/include/bsm/audit_uevents.h.
- *
- * @param misctok - A token_t * generated by one of the au_to_*() BSM API
- * calls. This should correspond to the additional information required by
- * CAPP for the event being audited. If no additional information is
- * required, misctok should be NULL.
- *
- * @param auid - The subject's audit ID.
- *
- * @param euid - The subject's effective user ID.
- *
- * @param egid - The subject's effective group ID.
- *
- * @param ruid - The subject's real user ID.
- *
- * @param rgid - The subject's real group ID.
- *
- * @param pid - The subject's process ID.
- *
- * @param sid - The subject's session ID.
- *
- * @param tid - The subject's terminal ID.
- *
- * @return - The status of the call: 0 (zero) on success, else one of the
- * kAU*Err values defined above.
- *
- * XXXRW: In Apple's bsm-8, these are marked __APPLE_API_PRIVATE.
- */
-int audit_write_success(short event_code, token_t *misctok, au_id_t auid,
- uid_t euid, gid_t egid, uid_t ruid, gid_t rgid, pid_t pid,
- au_asid_t sid, au_tid_t *tid);
-
-/*
- * audit_write_success_self()
- *
- * @summary - Similar to audit_write_success(), but used when the subject
- * (process) is owned and operated by the auditable user him/herself.
- *
- * @param event_code - The code for the event being logged. This should
- * be one of the AUE_ values in /usr/include/bsm/audit_uevents.h.
- *
- * @param misctok - A token_t * generated by one of the au_to_*() BSM API
- * calls. This should correspond to the additional information required by
- * CAPP for the event being audited. If no additional information is
- * required, misctok should be NULL.
- *
- * @return - The status of the call: 0 (zero) on success, else one of the
- * kAU*Err values defined above.
- *
- * XXXRW: In Apple's bsm-8, these are marked __APPLE_API_PRIVATE.
- */
-int audit_write_success_self(short event_code, token_t *misctok);
-
-/*
- * audit_write_failure()
- *
- * @summary - audit_write_failure() records an auditable event that
- * encountered an error. The interface is designed to require as little
- * direct use of the au_to_*() API as possible. It builds a subject token
- * from the information passed in and uses that to invoke audit_write().
- * A subject, as defined by CAPP, is a process acting on the user's behalf.
- *
- * If the subject information is the same as the current process, use
- * au_write_failure_self().
- *
- * @param event_code - The code for the event being logged. This should
- * be one of the AUE_ values in /usr/include/bsm/audit_uevents.h.
- *
- * @param errmsg - A text message providing additional information about
- * the event being audited.
- *
- * @param errret - A numerical value providing additional information about
- * the error. This is intended to store the value of errno or h_errno if
- * it's relevant. This can be 0 (zero) if no additional information is
- * available.
- *
- * @param auid - The subject's audit ID.
- *
- * @param euid - The subject's effective user ID.
- *
- * @param egid - The subject's effective group ID.
- *
- * @param ruid - The subject's real user ID.
- *
- * @param rgid - The subject's real group ID.
- *
- * @param pid - The subject's process ID.
- *
- * @param sid - The subject's session ID.
- *
- * @param tid - The subject's terminal ID.
- *
- * @return - The status of the call: 0 (zero) on success, else one of the
- * kAU*Err values defined above.
- *
- * XXXRW: In Apple's bsm-8, these are marked __APPLE_API_PRIVATE.
- */
-int audit_write_failure(short event_code, char *errmsg, int errret,
- au_id_t auid, uid_t euid, gid_t egid, uid_t ruid, gid_t rgid,
- pid_t pid, au_asid_t sid, au_tid_t *tid);
-
-/*
- * audit_write_failure_self()
- *
- * @summary - Similar to audit_write_failure(), but used when the subject
- * (process) is owned and operated by the auditable user him/herself.
- *
- * @param event_code - The code for the event being logged. This should
- * be one of the AUE_ values in /usr/include/bsm/audit_uevents.h.
- *
- * @param errmsg - A text message providing additional information about
- * the event being audited.
- *
- * @param errret - A numerical value providing additional information about
- * the error. This is intended to store the value of errno or h_errno if
- * it's relevant. This can be 0 (zero) if no additional information is
- * available.
- *
- * @return - The status of the call: 0 (zero) on success, else one of the
- * kAU*Err values defined above.
- *
- * XXXRW: In Apple's bsm-8, these are marked __APPLE_API_PRIVATE.
- */
-int audit_write_failure_self(short event_code, char *errmsg, int errret);
-
-/*
- * audit_write_failure_na()
- *
- * @summary - audit_write_failure_na() records errors during login. Such
- * errors are implicitly non-attributable (i.e., not ascribable to any user).
- *
- * @param event_code - The code for the event being logged. This should
- * be one of the AUE_ values in /usr/include/bsm/audit_uevents.h.
- *
- * @param errmsg - A text message providing additional information about
- * the event being audited.
- *
- * @param errret - A numerical value providing additional information about
- * the error. This is intended to store the value of errno or h_errno if
- * it's relevant. This can be 0 (zero) if no additional information is
- * available.
- *
- * @param euid - The subject's effective user ID.
- *
- * @param egid - The subject's effective group ID.
- *
- * @param pid - The subject's process ID.
- *
- * @param tid - The subject's terminal ID.
- *
- * @return - The status of the call: 0 (zero) on success, else one of the
- * kAU*Err values defined above.
- *
- * XXXRW: In Apple's bsm-8, these are marked __APPLE_API_PRIVATE.
- */
-int audit_write_failure_na(short event_code, char *errmsg, int errret,
- uid_t euid, gid_t egid, pid_t pid, au_tid_t *tid);
-
-/* END au_write() WRAPPERS */
-
-#ifdef __APPLE__
-/*
- * audit_token_to_au32()
- *
- * @summary - Extract information from an audit_token_t, used to identify
- * Mach tasks and senders of Mach messages as subjects to the audit system.
- * audit_tokent_to_au32() is the only method that should be used to parse
- * an audit_token_t, since its internal representation may change over
- * time. A pointer parameter may be NULL if that information is not
- * needed.
- *
- * @param atoken - the audit token containing the desired information
- *
- * @param auidp - Pointer to a uid_t; on return will be set to the task or
- * sender's audit user ID
- *
- * @param euidp - Pointer to a uid_t; on return will be set to the task or
- * sender's effective user ID
- *
- * @param egidp - Pointer to a gid_t; on return will be set to the task or
- * sender's effective group ID
- *
- * @param ruidp - Pointer to a uid_t; on return will be set to the task or
- * sender's real user ID
- *
- * @param rgidp - Pointer to a gid_t; on return will be set to the task or
- * sender's real group ID
- *
- * @param pidp - Pointer to a pid_t; on return will be set to the task or
- * sender's process ID
- *
- * @param asidp - Pointer to an au_asid_t; on return will be set to the
- * task or sender's audit session ID
- *
- * @param tidp - Pointer to an au_tid_t; on return will be set to the task
- * or sender's terminal ID
- *
- * XXXRW: In Apple's bsm-8, these are marked __APPLE_API_PRIVATE.
- */
-void audit_token_to_au32(
- audit_token_t atoken,
- uid_t *auidp,
- uid_t *euidp,
- gid_t *egidp,
- uid_t *ruidp,
- gid_t *rgidp,
- pid_t *pidp,
- au_asid_t *asidp,
- au_tid_t *tidp);
-#endif /* !__APPLE__ */
-
-__END_DECLS
-
-#endif /* !_LIBBSM_H_ */
Copied: vendor/openbsm/1.2_alpha4/bsm/libbsm.h (from rev 11163, vendor/openbsm/dist/bsm/libbsm.h)
===================================================================
--- vendor/openbsm/1.2_alpha4/bsm/libbsm.h (rev 0)
+++ vendor/openbsm/1.2_alpha4/bsm/libbsm.h 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,1340 @@
+/*-
+ * Copyright (c) 2004-2009 Apple Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of Apple Inc. ("Apple") nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _LIBBSM_H_
+#define _LIBBSM_H_
+
+/*
+ * NB: definitions, etc., marked with "OpenSSH compatibility" were introduced
+ * solely to allow OpenSSH to compile; Darwin/Apple code should not use them.
+ */
+
+#include <sys/types.h>
+#include <sys/cdefs.h>
+
+#include <inttypes.h> /* Required for audit.h. */
+#include <time.h> /* Required for clock_t on Linux. */
+
+#include <bsm/audit.h>
+#include <bsm/audit_record.h>
+
+#include <stdio.h>
+
+#ifdef __APPLE__
+#include <mach/mach.h> /* audit_token_t */
+#endif
+
+/*
+ * Size parsed token vectors for execve(2) arguments and environmental
+ * variables. Note: changing these sizes affects the ABI of the token
+ * structure, and as the token structure is often placed in the caller stack,
+ * this is undesirable.
+ */
+#define AUDIT_MAX_ARGS 128
+#define AUDIT_MAX_ENV 128
+
+/*
+ * Arguments to au_preselect(3).
+ */
+#define AU_PRS_USECACHE 0
+#define AU_PRS_REREAD 1
+
+#define AU_PRS_SUCCESS 1
+#define AU_PRS_FAILURE 2
+#define AU_PRS_BOTH (AU_PRS_SUCCESS|AU_PRS_FAILURE)
+
+#define AUDIT_EVENT_FILE "/etc/security/audit_event"
+#define AUDIT_CLASS_FILE "/etc/security/audit_class"
+#define AUDIT_CONTROL_FILE "/etc/security/audit_control"
+#define AUDIT_USER_FILE "/etc/security/audit_user"
+
+#define DIR_CONTROL_ENTRY "dir"
+#define DIST_CONTROL_ENTRY "dist"
+#define FILESZ_CONTROL_ENTRY "filesz"
+#define FLAGS_CONTROL_ENTRY "flags"
+#define HOST_CONTROL_ENTRY "host"
+#define MINFREE_CONTROL_ENTRY "minfree"
+#define NA_CONTROL_ENTRY "naflags"
+#define POLICY_CONTROL_ENTRY "policy"
+#define EXPIRE_AFTER_CONTROL_ENTRY "expire-after"
+
+#define AU_CLASS_NAME_MAX 8
+#define AU_CLASS_DESC_MAX 72
+#define AU_EVENT_NAME_MAX 30
+#define AU_EVENT_DESC_MAX 50
+#define AU_USER_NAME_MAX 50
+#define AU_LINE_MAX 256
+#define MAX_AUDITSTRING_LEN 256
+#define BSM_TEXTBUFSZ MAX_AUDITSTRING_LEN /* OpenSSH compatibility */
+
+/*
+ * Arguments to au_close(3).
+ */
+#define AU_TO_NO_WRITE 0 /* Abandon audit record. */
+#define AU_TO_WRITE 1 /* Commit audit record. */
+
+/*
+ * Output format flags for au_print_flags_tok().
+ */
+#define AU_OFLAG_NONE 0x0000 /* Default form. */
+#define AU_OFLAG_RAW 0x0001 /* Raw, numeric form. */
+#define AU_OFLAG_SHORT 0x0002 /* Short form. */
+#define AU_OFLAG_XML 0x0004 /* XML form. */
+#define AU_OFLAG_NORESOLVE 0x0008 /* No user/group name resolution. */
+
+__BEGIN_DECLS
+struct au_event_ent {
+ au_event_t ae_number;
+ char *ae_name;
+ char *ae_desc;
+ au_class_t ae_class;
+};
+typedef struct au_event_ent au_event_ent_t;
+
+struct au_class_ent {
+ char *ac_name;
+ au_class_t ac_class;
+ char *ac_desc;
+};
+typedef struct au_class_ent au_class_ent_t;
+
+struct au_user_ent {
+ char *au_name;
+ au_mask_t au_always;
+ au_mask_t au_never;
+};
+typedef struct au_user_ent au_user_ent_t;
+__END_DECLS
+
+#define ADD_TO_MASK(m, c, sel) do { \
+ if (sel & AU_PRS_SUCCESS) \
+ (m)->am_success |= c; \
+ if (sel & AU_PRS_FAILURE) \
+ (m)->am_failure |= c; \
+} while (0)
+
+#define SUB_FROM_MASK(m, c, sel) do { \
+ if (sel & AU_PRS_SUCCESS) \
+ (m)->am_success &= ((m)->am_success ^ c); \
+ if (sel & AU_PRS_FAILURE) \
+ (m)->am_failure &= ((m)->am_failure ^ c); \
+} while (0)
+
+#define ADDMASK(m, v) do { \
+ (m)->am_success |= (v)->am_success; \
+ (m)->am_failure |= (v)->am_failure; \
+} while(0)
+
+#define SUBMASK(m, v) do { \
+ (m)->am_success &= ((m)->am_success ^ (v)->am_success); \
+ (m)->am_failure &= ((m)->am_failure ^ (v)->am_failure); \
+} while(0)
+
+__BEGIN_DECLS
+
+typedef struct au_tid32 {
+ u_int32_t port;
+ u_int32_t addr;
+} au_tid32_t;
+
+typedef struct au_tid64 {
+ u_int64_t port;
+ u_int32_t addr;
+} au_tid64_t;
+
+typedef struct au_tidaddr32 {
+ u_int32_t port;
+ u_int32_t type;
+ u_int32_t addr[4];
+} au_tidaddr32_t;
+
+typedef struct au_tidaddr64 {
+ u_int64_t port;
+ u_int32_t type;
+ u_int32_t addr[4];
+} au_tidaddr64_t;
+
+/*
+ * argument # 1 byte
+ * argument value 4 bytes/8 bytes (32-bit/64-bit value)
+ * text length 2 bytes
+ * text N bytes + 1 terminating NULL byte
+ */
+typedef struct {
+ u_char no;
+ u_int32_t val;
+ u_int16_t len;
+ char *text;
+} au_arg32_t;
+
+typedef struct {
+ u_char no;
+ u_int64_t val;
+ u_int16_t len;
+ char *text;
+} au_arg64_t;
+
+/*
+ * how to print 1 byte
+ * basic unit 1 byte
+ * unit count 1 byte
+ * data items (depends on basic unit)
+ */
+typedef struct {
+ u_char howtopr;
+ u_char bu;
+ u_char uc;
+ u_char *data;
+} au_arb_t;
+
+/*
+ * file access mode 4 bytes
+ * owner user ID 4 bytes
+ * owner group ID 4 bytes
+ * file system ID 4 bytes
+ * node ID 8 bytes
+ * device 4 bytes/8 bytes (32-bit/64-bit)
+ */
+typedef struct {
+ u_int32_t mode;
+ u_int32_t uid;
+ u_int32_t gid;
+ u_int32_t fsid;
+ u_int64_t nid;
+ u_int32_t dev;
+} au_attr32_t;
+
+typedef struct {
+ u_int32_t mode;
+ u_int32_t uid;
+ u_int32_t gid;
+ u_int32_t fsid;
+ u_int64_t nid;
+ u_int64_t dev;
+} au_attr64_t;
+
+/*
+ * count 4 bytes
+ * text count null-terminated string(s)
+ */
+typedef struct {
+ u_int32_t count;
+ char *text[AUDIT_MAX_ARGS];
+} au_execarg_t;
+
+/*
+ * count 4 bytes
+ * text count null-terminated string(s)
+ */
+typedef struct {
+ u_int32_t count;
+ char *text[AUDIT_MAX_ENV];
+} au_execenv_t;
+
+/*
+ * status 4 bytes
+ * return value 4 bytes
+ */
+typedef struct {
+ u_int32_t status;
+ u_int32_t ret;
+} au_exit_t;
+
+/*
+ * seconds of time 4 bytes
+ * milliseconds of time 4 bytes
+ * file name length 2 bytes
+ * file pathname N bytes + 1 terminating NULL byte
+ */
+typedef struct {
+ u_int32_t s;
+ u_int32_t ms;
+ u_int16_t len;
+ char *name;
+} au_file_t;
+
+
+/*
+ * number groups 2 bytes
+ * group list N * 4 bytes
+ */
+typedef struct {
+ u_int16_t no;
+ u_int32_t list[AUDIT_MAX_GROUPS];
+} au_groups_t;
+
+/*
+ * record byte count 4 bytes
+ * version # 1 byte [2]
+ * event type 2 bytes
+ * event modifier 2 bytes
+ * seconds of time 4 bytes/8 bytes (32-bit/64-bit value)
+ * milliseconds of time 4 bytes/8 bytes (32-bit/64-bit value)
+ */
+typedef struct {
+ u_int32_t size;
+ u_char version;
+ u_int16_t e_type;
+ u_int16_t e_mod;
+ u_int32_t s;
+ u_int32_t ms;
+} au_header32_t;
+
+/*
+ * record byte count 4 bytes
+ * version # 1 byte [2]
+ * event type 2 bytes
+ * event modifier 2 bytes
+ * address type/length 1 byte (XXX: actually, 4 bytes)
+ * machine address 4 bytes/16 bytes (IPv4/IPv6 address)
+ * seconds of time 4 bytes/8 bytes (32/64-bits)
+ * nanoseconds of time 4 bytes/8 bytes (32/64-bits)
+ */
+typedef struct {
+ u_int32_t size;
+ u_char version;
+ u_int16_t e_type;
+ u_int16_t e_mod;
+ u_int32_t ad_type;
+ u_int32_t addr[4];
+ u_int32_t s;
+ u_int32_t ms;
+} au_header32_ex_t;
+
+typedef struct {
+ u_int32_t size;
+ u_char version;
+ u_int16_t e_type;
+ u_int16_t e_mod;
+ u_int64_t s;
+ u_int64_t ms;
+} au_header64_t;
+
+typedef struct {
+ u_int32_t size;
+ u_char version;
+ u_int16_t e_type;
+ u_int16_t e_mod;
+ u_int32_t ad_type;
+ u_int32_t addr[4];
+ u_int64_t s;
+ u_int64_t ms;
+} au_header64_ex_t;
+
+/*
+ * internet address 4 bytes
+ */
+typedef struct {
+ u_int32_t addr;
+} au_inaddr_t;
+
+/*
+ * type 4 bytes
+ * internet address 16 bytes
+ */
+typedef struct {
+ u_int32_t type;
+ u_int32_t addr[4];
+} au_inaddr_ex_t;
+
+/*
+ * version and ihl 1 byte
+ * type of service 1 byte
+ * length 2 bytes
+ * id 2 bytes
+ * offset 2 bytes
+ * ttl 1 byte
+ * protocol 1 byte
+ * checksum 2 bytes
+ * source address 4 bytes
+ * destination address 4 bytes
+ */
+typedef struct {
+ u_char version;
+ u_char tos;
+ u_int16_t len;
+ u_int16_t id;
+ u_int16_t offset;
+ u_char ttl;
+ u_char prot;
+ u_int16_t chksm;
+ u_int32_t src;
+ u_int32_t dest;
+} au_ip_t;
+
+/*
+ * object ID type 1 byte
+ * object ID 4 bytes
+ */
+typedef struct {
+ u_char type;
+ u_int32_t id;
+} au_ipc_t;
+
+/*
+ * owner user ID 4 bytes
+ * owner group ID 4 bytes
+ * creator user ID 4 bytes
+ * creator group ID 4 bytes
+ * access mode 4 bytes
+ * slot sequence # 4 bytes
+ * key 4 bytes
+ */
+typedef struct {
+ u_int32_t uid;
+ u_int32_t gid;
+ u_int32_t puid;
+ u_int32_t pgid;
+ u_int32_t mode;
+ u_int32_t seq;
+ u_int32_t key;
+} au_ipcperm_t;
+
+/*
+ * port IP address 2 bytes
+ */
+typedef struct {
+ u_int16_t port;
+} au_iport_t;
+
+/*
+ * length 2 bytes
+ * data length bytes
+ */
+typedef struct {
+ u_int16_t size;
+ char *data;
+} au_opaque_t;
+
+/*
+ * path length 2 bytes
+ * path N bytes + 1 terminating NULL byte
+ */
+typedef struct {
+ u_int16_t len;
+ char *path;
+} au_path_t;
+
+/*
+ * audit ID 4 bytes
+ * effective user ID 4 bytes
+ * effective group ID 4 bytes
+ * real user ID 4 bytes
+ * real group ID 4 bytes
+ * process ID 4 bytes
+ * session ID 4 bytes
+ * terminal ID
+ * port ID 4 bytes/8 bytes (32-bit/64-bit value)
+ * machine address 4 bytes
+ */
+typedef struct {
+ u_int32_t auid;
+ u_int32_t euid;
+ u_int32_t egid;
+ u_int32_t ruid;
+ u_int32_t rgid;
+ u_int32_t pid;
+ u_int32_t sid;
+ au_tid32_t tid;
+} au_proc32_t;
+
+typedef struct {
+ u_int32_t auid;
+ u_int32_t euid;
+ u_int32_t egid;
+ u_int32_t ruid;
+ u_int32_t rgid;
+ u_int32_t pid;
+ u_int32_t sid;
+ au_tid64_t tid;
+} au_proc64_t;
+
+/*
+ * audit ID 4 bytes
+ * effective user ID 4 bytes
+ * effective group ID 4 bytes
+ * real user ID 4 bytes
+ * real group ID 4 bytes
+ * process ID 4 bytes
+ * session ID 4 bytes
+ * terminal ID
+ * port ID 4 bytes/8 bytes (32-bit/64-bit value)
+ * type 4 bytes
+ * machine address 16 bytes
+ */
+typedef struct {
+ u_int32_t auid;
+ u_int32_t euid;
+ u_int32_t egid;
+ u_int32_t ruid;
+ u_int32_t rgid;
+ u_int32_t pid;
+ u_int32_t sid;
+ au_tidaddr32_t tid;
+} au_proc32ex_t;
+
+typedef struct {
+ u_int32_t auid;
+ u_int32_t euid;
+ u_int32_t egid;
+ u_int32_t ruid;
+ u_int32_t rgid;
+ u_int32_t pid;
+ u_int32_t sid;
+ au_tidaddr64_t tid;
+} au_proc64ex_t;
+
+/*
+ * error status 1 byte
+ * return value 4 bytes/8 bytes (32-bit/64-bit value)
+ */
+typedef struct {
+ u_char status;
+ u_int32_t ret;
+} au_ret32_t;
+
+typedef struct {
+ u_char err;
+ u_int64_t val;
+} au_ret64_t;
+
+/*
+ * sequence number 4 bytes
+ */
+typedef struct {
+ u_int32_t seqno;
+} au_seq_t;
+
+/*
+ * socket type 2 bytes
+ * local port 2 bytes
+ * local Internet address 4 bytes
+ * remote port 2 bytes
+ * remote Internet address 4 bytes
+ */
+typedef struct {
+ u_int16_t type;
+ u_int16_t l_port;
+ u_int32_t l_addr;
+ u_int16_t r_port;
+ u_int32_t r_addr;
+} au_socket_t;
+
+/*
+ * socket type 2 bytes
+ * local port 2 bytes
+ * address type/length 4 bytes
+ * local Internet address 4 bytes/16 bytes (IPv4/IPv6 address)
+ * remote port 4 bytes
+ * address type/length 4 bytes
+ * remote Internet address 4 bytes/16 bytes (IPv4/IPv6 address)
+ */
+typedef struct {
+ u_int16_t domain;
+ u_int16_t type;
+ u_int16_t atype;
+ u_int16_t l_port;
+ u_int32_t l_addr[4];
+ u_int32_t r_port;
+ u_int32_t r_addr[4];
+} au_socket_ex32_t;
+
+/*
+ * socket family 2 bytes
+ * local port 2 bytes
+ * socket address 4 bytes/16 bytes (IPv4/IPv6 address)
+ */
+typedef struct {
+ u_int16_t family;
+ u_int16_t port;
+ u_int32_t addr[4];
+} au_socketinet_ex32_t;
+
+typedef struct {
+ u_int16_t family;
+ u_int16_t port;
+ u_int32_t addr;
+} au_socketinet32_t;
+
+/*
+ * socket family 2 bytes
+ * path 104 bytes
+ */
+typedef struct {
+ u_int16_t family;
+ char path[104];
+} au_socketunix_t;
+
+/*
+ * audit ID 4 bytes
+ * effective user ID 4 bytes
+ * effective group ID 4 bytes
+ * real user ID 4 bytes
+ * real group ID 4 bytes
+ * process ID 4 bytes
+ * session ID 4 bytes
+ * terminal ID
+ * port ID 4 bytes/8 bytes (32-bit/64-bit value)
+ * machine address 4 bytes
+ */
+typedef struct {
+ u_int32_t auid;
+ u_int32_t euid;
+ u_int32_t egid;
+ u_int32_t ruid;
+ u_int32_t rgid;
+ u_int32_t pid;
+ u_int32_t sid;
+ au_tid32_t tid;
+} au_subject32_t;
+
+typedef struct {
+ u_int32_t auid;
+ u_int32_t euid;
+ u_int32_t egid;
+ u_int32_t ruid;
+ u_int32_t rgid;
+ u_int32_t pid;
+ u_int32_t sid;
+ au_tid64_t tid;
+} au_subject64_t;
+
+/*
+ * audit ID 4 bytes
+ * effective user ID 4 bytes
+ * effective group ID 4 bytes
+ * real user ID 4 bytes
+ * real group ID 4 bytes
+ * process ID 4 bytes
+ * session ID 4 bytes
+ * terminal ID
+ * port ID 4 bytes/8 bytes (32-bit/64-bit value)
+ * type 4 bytes
+ * machine address 16 bytes
+ */
+typedef struct {
+ u_int32_t auid;
+ u_int32_t euid;
+ u_int32_t egid;
+ u_int32_t ruid;
+ u_int32_t rgid;
+ u_int32_t pid;
+ u_int32_t sid;
+ au_tidaddr32_t tid;
+} au_subject32ex_t;
+
+typedef struct {
+ u_int32_t auid;
+ u_int32_t euid;
+ u_int32_t egid;
+ u_int32_t ruid;
+ u_int32_t rgid;
+ u_int32_t pid;
+ u_int32_t sid;
+ au_tidaddr64_t tid;
+} au_subject64ex_t;
+
+/*
+ * text length 2 bytes
+ * text N bytes + 1 terminating NULL byte
+ */
+typedef struct {
+ u_int16_t len;
+ char *text;
+} au_text_t;
+
+/*
+ * upriv status 1 byte
+ * privstr len 2 bytes
+ * privstr N bytes + 1 (\0 byte)
+ */
+typedef struct {
+ u_int8_t sorf;
+ u_int16_t privstrlen;
+ char *priv;
+} au_priv_t;
+
+/*
+* privset
+* privtstrlen 2 bytes
+* privtstr N Bytes + 1
+* privstrlen 2 bytes
+* privstr N Bytes + 1
+*/
+typedef struct {
+ u_int16_t privtstrlen;
+ char *privtstr;
+ u_int16_t privstrlen;
+ char *privstr;
+} au_privset_t;
+
+/*
+ * zonename length 2 bytes
+ * zonename text N bytes + 1 NULL terminator
+ */
+typedef struct {
+ u_int16_t len;
+ char *zonename;
+} au_zonename_t;
+
+typedef struct {
+ u_int32_t ident;
+ u_int16_t filter;
+ u_int16_t flags;
+ u_int32_t fflags;
+ u_int32_t data;
+} au_kevent_t;
+
+typedef struct {
+ u_int16_t length;
+ char *data;
+} au_invalid_t;
+
+/*
+ * trailer magic number 2 bytes
+ * record byte count 4 bytes
+ */
+typedef struct {
+ u_int16_t magic;
+ u_int32_t count;
+} au_trailer_t;
+
+struct tokenstr {
+ u_char id;
+ u_char *data;
+ size_t len;
+ union {
+ au_arg32_t arg32;
+ au_arg64_t arg64;
+ au_arb_t arb;
+ au_attr32_t attr32;
+ au_attr64_t attr64;
+ au_execarg_t execarg;
+ au_execenv_t execenv;
+ au_exit_t exit;
+ au_file_t file;
+ au_groups_t grps;
+ au_header32_t hdr32;
+ au_header32_ex_t hdr32_ex;
+ au_header64_t hdr64;
+ au_header64_ex_t hdr64_ex;
+ au_inaddr_t inaddr;
+ au_inaddr_ex_t inaddr_ex;
+ au_ip_t ip;
+ au_ipc_t ipc;
+ au_ipcperm_t ipcperm;
+ au_iport_t iport;
+ au_opaque_t opaque;
+ au_path_t path;
+ au_proc32_t proc32;
+ au_proc32ex_t proc32_ex;
+ au_proc64_t proc64;
+ au_proc64ex_t proc64_ex;
+ au_ret32_t ret32;
+ au_ret64_t ret64;
+ au_seq_t seq;
+ au_socket_t socket;
+ au_socket_ex32_t socket_ex32;
+ au_socketinet_ex32_t sockinet_ex32;
+ au_socketunix_t sockunix;
+ au_subject32_t subj32;
+ au_subject32ex_t subj32_ex;
+ au_subject64_t subj64;
+ au_subject64ex_t subj64_ex;
+ au_text_t text;
+ au_kevent_t kevent;
+ au_invalid_t invalid;
+ au_trailer_t trail;
+ au_zonename_t zonename;
+ au_priv_t priv;
+ au_privset_t privset;
+ } tt; /* The token is one of the above types */
+};
+
+typedef struct tokenstr tokenstr_t;
+
+int audit_submit(short au_event, au_id_t auid,
+ char status, int reterr, const char *fmt, ...);
+
+/*
+ * Functions relating to querying audit class information.
+ */
+void setauclass(void);
+void endauclass(void);
+struct au_class_ent *getauclassent(void);
+struct au_class_ent *getauclassent_r(au_class_ent_t *class_int);
+struct au_class_ent *getauclassnam(const char *name);
+struct au_class_ent *getauclassnam_r(au_class_ent_t *class_int,
+ const char *name);
+struct au_class_ent *getauclassnum(au_class_t class_number);
+struct au_class_ent *getauclassnum_r(au_class_ent_t *class_int,
+ au_class_t class_number);
+
+/*
+ * Functions relating to querying audit control information.
+ */
+void setac(void);
+void endac(void);
+int getacdir(char *name, int len);
+int getacdist(void);
+int getacexpire(int *andflg, time_t *age, size_t *size);
+int getacfilesz(size_t *size_val);
+int getacflg(char *auditstr, int len);
+int getachost(char *auditstr, size_t len);
+int getacmin(int *min_val);
+int getacna(char *auditstr, int len);
+int getacpol(char *auditstr, size_t len);
+int getauditflagsbin(char *auditstr, au_mask_t *masks);
+int getauditflagschar(char *auditstr, au_mask_t *masks,
+ int verbose);
+int au_preselect(au_event_t event, au_mask_t *mask_p,
+ int sorf, int flag);
+ssize_t au_poltostr(int policy, size_t maxsize, char *buf);
+int au_strtopol(const char *polstr, int *policy);
+
+/*
+ * Functions relating to querying audit event information.
+ */
+void setauevent(void);
+void endauevent(void);
+struct au_event_ent *getauevent(void);
+struct au_event_ent *getauevent_r(struct au_event_ent *e);
+struct au_event_ent *getauevnam(const char *name);
+struct au_event_ent *getauevnam_r(struct au_event_ent *e,
+ const char *name);
+struct au_event_ent *getauevnum(au_event_t event_number);
+struct au_event_ent *getauevnum_r(struct au_event_ent *e,
+ au_event_t event_number);
+au_event_t *getauevnonam(const char *event_name);
+au_event_t *getauevnonam_r(au_event_t *ev,
+ const char *event_name);
+
+/*
+ * Functions relating to querying audit user information.
+ */
+void setauuser(void);
+void endauuser(void);
+struct au_user_ent *getauuserent(void);
+struct au_user_ent *getauuserent_r(struct au_user_ent *u);
+struct au_user_ent *getauusernam(const char *name);
+struct au_user_ent *getauusernam_r(struct au_user_ent *u,
+ const char *name);
+int au_user_mask(char *username, au_mask_t *mask_p);
+int getfauditflags(au_mask_t *usremask,
+ au_mask_t *usrdmask, au_mask_t *lastmask);
+
+/*
+ * Functions for reading and printing records and tokens from audit trails.
+ */
+int au_read_rec(FILE *fp, u_char **buf);
+int au_fetch_tok(tokenstr_t *tok, u_char *buf, int len);
+//XXX The following interface has different prototype from BSM
+void au_print_tok(FILE *outfp, tokenstr_t *tok,
+ char *del, char raw, char sfrm);
+void au_print_flags_tok(FILE *outfp, tokenstr_t *tok,
+ char *del, int oflags);
+void au_print_tok_xml(FILE *outfp, tokenstr_t *tok,
+ char *del, char raw, char sfrm);
+
+/*
+ * Functions relating to XML output.
+ */
+void au_print_xml_header(FILE *outfp);
+void au_print_xml_footer(FILE *outfp);
+
+/*
+ * BSM library routines for converting between local and BSM constant spaces.
+ * (Note: some of these are replicated in audit_record.h for the benefit of
+ * the FreeBSD and Mac OS X kernels)
+ */
+int au_bsm_to_domain(u_short bsm_domain, int *local_domainp);
+int au_bsm_to_errno(u_char bsm_error, int *errorp);
+int au_bsm_to_fcntl_cmd(u_short bsm_fcntl_cmd, int *local_fcntl_cmdp);
+int au_bsm_to_socket_type(u_short bsm_socket_type,
+ int *local_socket_typep);
+u_short au_domain_to_bsm(int local_domain);
+u_char au_errno_to_bsm(int local_errno);
+u_short au_fcntl_cmd_to_bsm(int local_fcntl_command);
+u_short au_socket_type_to_bsm(int local_socket_type);
+
+const char *au_strerror(u_char bsm_error);
+__END_DECLS
+
+/*
+ * The remaining APIs are associated with Apple's BSM implementation, in
+ * particular as relates to Mach IPC auditing and triggers passed via Mach
+ * IPC.
+ */
+#ifdef __APPLE__
+#include <sys/appleapiopts.h>
+
+/**************************************************************************
+ **************************************************************************
+ ** The following definitions, functions, etc., are NOT officially
+ ** supported: they may be changed or removed in the future. Do not use
+ ** them unless you are prepared to cope with that eventuality.
+ **************************************************************************
+ **************************************************************************/
+
+#ifdef __APPLE_API_PRIVATE
+#define __BSM_INTERNAL_NOTIFY_KEY "com.apple.audit.change"
+#endif /* __APPLE_API_PRIVATE */
+
+/*
+ * au_get_state() return values
+ * XXX use AUC_* values directly instead (<bsm/audit.h>); AUDIT_OFF and
+ * AUDIT_ON are deprecated and WILL be removed.
+ */
+#ifdef __APPLE_API_PRIVATE
+#define AUDIT_OFF AUC_NOAUDIT
+#define AUDIT_ON AUC_AUDITING
+#endif /* __APPLE_API_PRIVATE */
+#endif /* !__APPLE__ */
+
+/*
+ * Error return codes for audit_set_terminal_id(), audit_write() and its
+ * brethren. We have 255 (not including kAUNoErr) to play with.
+ *
+ * XXXRW: In Apple's bsm-8, these are marked __APPLE_API_PRIVATE.
+ */
+enum {
+ kAUNoErr = 0,
+ kAUBadParamErr = -66049,
+ kAUStatErr,
+ kAUSysctlErr,
+ kAUOpenErr,
+ kAUMakeSubjectTokErr,
+ kAUWriteSubjectTokErr,
+ kAUWriteCallerTokErr,
+ kAUMakeReturnTokErr,
+ kAUWriteReturnTokErr,
+ kAUCloseErr,
+ kAUMakeTextTokErr,
+ kAULastErr
+};
+
+#ifdef __APPLE__
+/*
+ * Error return codes for au_get_state() and/or its private support
+ * functions. These codes are designed to be compatible with the
+ * NOTIFY_STATUS_* codes defined in <notify.h> but non-overlapping.
+ * Any changes to notify(3) may cause these values to change in future.
+ *
+ * AU_UNIMPL should never happen unless you've changed your system software
+ * without rebooting. Shame on you.
+ */
+#ifdef __APPLE_API_PRIVATE
+#define AU_UNIMPL NOTIFY_STATUS_FAILED + 1 /* audit unimplemented */
+#endif /* __APPLE_API_PRIVATE */
+#endif /* !__APPLE__ */
+
+__BEGIN_DECLS
+/*
+ * XXX This prototype should be in audit_record.h
+ *
+ * au_free_token()
+ *
+ * @summary - au_free_token() deallocates a token_t created by any of
+ * the au_to_*() BSM API functions.
+ *
+ * The BSM API generally manages deallocation of token_t objects. However,
+ * if au_write() is passed a bad audit descriptor, the token_t * parameter
+ * will be left untouched. In that case, the caller can deallocate the
+ * token_t using au_free_token() if desired. This is, in fact, what
+ * audit_write() does, in keeping with the existing memory management model
+ * of the BSM API.
+ *
+ * @param tok - A token_t * generated by one of the au_to_*() BSM API
+ * calls. For convenience, tok may be NULL, in which case
+ * au_free_token() returns immediately.
+ *
+ * XXXRW: In Apple's bsm-8, these are marked __APPLE_API_PRIVATE.
+ */
+void au_free_token(token_t *tok);
+
+/*
+ * Lightweight check to determine if auditing is enabled. If a client
+ * wants to use this to govern whether an entire series of audit calls
+ * should be made--as in the common case of a caller building a set of
+ * tokens, then writing them--it should cache the audit status in a local
+ * variable. This call always returns the current state of auditing.
+ *
+ * @return - AUC_AUDITING or AUC_NOAUDIT if no error occurred.
+ * Otherwise the function can return any of the errno values defined for
+ * setaudit(2), or AU_UNIMPL if audit does not appear to be supported by
+ * the system.
+ *
+ * XXXRW: In Apple's bsm-8, these are marked __APPLE_API_PRIVATE.
+ */
+int au_get_state(void);
+
+/*
+ * Initialize the audit notification. If it has not already been initialized
+ * it will automatically on the first call of au_get_state().
+ */
+uint32_t au_notify_initialize(void);
+
+/*
+ * Cancel audit notification and free the resources associated with it.
+ * Responsible code that no longer needs to use au_get_state() should call
+ * this.
+ */
+int au_notify_terminate(void);
+__END_DECLS
+
+/* OpenSSH compatibility */
+int cannot_audit(int);
+
+__BEGIN_DECLS
+/*
+ * audit_set_terminal_id()
+ *
+ * @summary - audit_set_terminal_id() fills in an au_tid_t struct, which is
+ * used in audit session initialization by processes like /usr/bin/login.
+ *
+ * @param tid - A pointer to an au_tid_t struct.
+ *
+ * @return - kAUNoErr on success; kAUBadParamErr if tid is NULL, kAUStatErr
+ * or kAUSysctlErr if one of the underlying system calls fails (a message
+ * is sent to the system log in those cases).
+ *
+ * XXXRW: In Apple's bsm-8, these are marked __APPLE_API_PRIVATE.
+ */
+int audit_set_terminal_id(au_tid_t *tid);
+
+/*
+ * BEGIN au_write() WRAPPERS
+ *
+ * The following calls all wrap the existing BSM API. They use the
+ * provided subject information, if any, to construct the subject token
+ * required for every log message. They use the provided return/error
+ * value(s), if any, to construct the success/failure indication required
+ * for every log message. They only permit one "miscellaneous" token,
+ * which should contain the event-specific logging information mandated by
+ * CAPP.
+ *
+ * All these calls assume the caller has previously determined that
+ * auditing is enabled by calling au_get_state().
+ */
+
+/*
+ * audit_write()
+ *
+ * @summary - audit_write() is the basis for the other audit_write_*()
+ * calls. Performs a basic write of an audit record (subject, additional
+ * info, success/failure). Note that this call only permits logging one
+ * caller-specified token; clients needing to log more flexibly must use
+ * the existing BSM API (au_open(), et al.) directly.
+ *
+ * Note on memory management: audit_write() guarantees that the token_t *s
+ * passed to it will be deallocated whether or not the underlying write to
+ * the audit log succeeded. This addresses an inconsistency in the
+ * underlying BSM API in which token_t *s are usually but not always
+ * deallocated.
+ *
+ * @param event_code - The code for the event being logged. This should
+ * be one of the AUE_ values in /usr/include/bsm/audit_uevents.h.
+ *
+ * @param subject - A token_t * generated by au_to_subject(),
+ * au_to_subject32(), au_to_subject64(), or au_to_me(). If no subject is
+ * required, subject should be NULL.
+ *
+ * @param misctok - A token_t * generated by one of the au_to_*() BSM API
+ * calls. This should correspond to the additional information required by
+ * CAPP for the event being audited. If no additional information is
+ * required, misctok should be NULL.
+ *
+ * @param retval - The return value to be logged for this event. This
+ * should be 0 (zero) for success, otherwise the value is event-specific.
+ *
+ * @param errcode - Any error code associated with the return value (e.g.,
+ * errno or h_errno). If there was no error, errcode should be 0 (zero).
+ *
+ * @return - The status of the call: 0 (zero) on success, else one of the
+ * kAU*Err values defined above.
+ *
+ * XXXRW: In Apple's bsm-8, these are marked __APPLE_API_PRIVATE.
+ */
+int audit_write(short event_code, token_t *subject, token_t *misctok,
+ char retval, int errcode);
+
+/*
+ * audit_write_success()
+ *
+ * @summary - audit_write_success() records an auditable event that did not
+ * encounter an error. The interface is designed to require as little
+ * direct use of the au_to_*() API as possible. It builds a subject token
+ * from the information passed in and uses that to invoke audit_write().
+ * A subject, as defined by CAPP, is a process acting on the user's behalf.
+ *
+ * If the subject information is the same as the current process, use
+ * au_write_success_self().
+ *
+ * @param event_code - The code for the event being logged. This should
+ * be one of the AUE_ values in /usr/include/bsm/audit_uevents.h.
+ *
+ * @param misctok - A token_t * generated by one of the au_to_*() BSM API
+ * calls. This should correspond to the additional information required by
+ * CAPP for the event being audited. If no additional information is
+ * required, misctok should be NULL.
+ *
+ * @param auid - The subject's audit ID.
+ *
+ * @param euid - The subject's effective user ID.
+ *
+ * @param egid - The subject's effective group ID.
+ *
+ * @param ruid - The subject's real user ID.
+ *
+ * @param rgid - The subject's real group ID.
+ *
+ * @param pid - The subject's process ID.
+ *
+ * @param sid - The subject's session ID.
+ *
+ * @param tid - The subject's terminal ID.
+ *
+ * @return - The status of the call: 0 (zero) on success, else one of the
+ * kAU*Err values defined above.
+ *
+ * XXXRW: In Apple's bsm-8, these are marked __APPLE_API_PRIVATE.
+ */
+int audit_write_success(short event_code, token_t *misctok, au_id_t auid,
+ uid_t euid, gid_t egid, uid_t ruid, gid_t rgid, pid_t pid,
+ au_asid_t sid, au_tid_t *tid);
+
+/*
+ * audit_write_success_self()
+ *
+ * @summary - Similar to audit_write_success(), but used when the subject
+ * (process) is owned and operated by the auditable user him/herself.
+ *
+ * @param event_code - The code for the event being logged. This should
+ * be one of the AUE_ values in /usr/include/bsm/audit_uevents.h.
+ *
+ * @param misctok - A token_t * generated by one of the au_to_*() BSM API
+ * calls. This should correspond to the additional information required by
+ * CAPP for the event being audited. If no additional information is
+ * required, misctok should be NULL.
+ *
+ * @return - The status of the call: 0 (zero) on success, else one of the
+ * kAU*Err values defined above.
+ *
+ * XXXRW: In Apple's bsm-8, these are marked __APPLE_API_PRIVATE.
+ */
+int audit_write_success_self(short event_code, token_t *misctok);
+
+/*
+ * audit_write_failure()
+ *
+ * @summary - audit_write_failure() records an auditable event that
+ * encountered an error. The interface is designed to require as little
+ * direct use of the au_to_*() API as possible. It builds a subject token
+ * from the information passed in and uses that to invoke audit_write().
+ * A subject, as defined by CAPP, is a process acting on the user's behalf.
+ *
+ * If the subject information is the same as the current process, use
+ * au_write_failure_self().
+ *
+ * @param event_code - The code for the event being logged. This should
+ * be one of the AUE_ values in /usr/include/bsm/audit_uevents.h.
+ *
+ * @param errmsg - A text message providing additional information about
+ * the event being audited.
+ *
+ * @param errret - A numerical value providing additional information about
+ * the error. This is intended to store the value of errno or h_errno if
+ * it's relevant. This can be 0 (zero) if no additional information is
+ * available.
+ *
+ * @param auid - The subject's audit ID.
+ *
+ * @param euid - The subject's effective user ID.
+ *
+ * @param egid - The subject's effective group ID.
+ *
+ * @param ruid - The subject's real user ID.
+ *
+ * @param rgid - The subject's real group ID.
+ *
+ * @param pid - The subject's process ID.
+ *
+ * @param sid - The subject's session ID.
+ *
+ * @param tid - The subject's terminal ID.
+ *
+ * @return - The status of the call: 0 (zero) on success, else one of the
+ * kAU*Err values defined above.
+ *
+ * XXXRW: In Apple's bsm-8, these are marked __APPLE_API_PRIVATE.
+ */
+int audit_write_failure(short event_code, char *errmsg, int errret,
+ au_id_t auid, uid_t euid, gid_t egid, uid_t ruid, gid_t rgid,
+ pid_t pid, au_asid_t sid, au_tid_t *tid);
+
+/*
+ * audit_write_failure_self()
+ *
+ * @summary - Similar to audit_write_failure(), but used when the subject
+ * (process) is owned and operated by the auditable user him/herself.
+ *
+ * @param event_code - The code for the event being logged. This should
+ * be one of the AUE_ values in /usr/include/bsm/audit_uevents.h.
+ *
+ * @param errmsg - A text message providing additional information about
+ * the event being audited.
+ *
+ * @param errret - A numerical value providing additional information about
+ * the error. This is intended to store the value of errno or h_errno if
+ * it's relevant. This can be 0 (zero) if no additional information is
+ * available.
+ *
+ * @return - The status of the call: 0 (zero) on success, else one of the
+ * kAU*Err values defined above.
+ *
+ * XXXRW: In Apple's bsm-8, these are marked __APPLE_API_PRIVATE.
+ */
+int audit_write_failure_self(short event_code, char *errmsg, int errret);
+
+/*
+ * audit_write_failure_na()
+ *
+ * @summary - audit_write_failure_na() records errors during login. Such
+ * errors are implicitly non-attributable (i.e., not ascribable to any user).
+ *
+ * @param event_code - The code for the event being logged. This should
+ * be one of the AUE_ values in /usr/include/bsm/audit_uevents.h.
+ *
+ * @param errmsg - A text message providing additional information about
+ * the event being audited.
+ *
+ * @param errret - A numerical value providing additional information about
+ * the error. This is intended to store the value of errno or h_errno if
+ * it's relevant. This can be 0 (zero) if no additional information is
+ * available.
+ *
+ * @param euid - The subject's effective user ID.
+ *
+ * @param egid - The subject's effective group ID.
+ *
+ * @param pid - The subject's process ID.
+ *
+ * @param tid - The subject's terminal ID.
+ *
+ * @return - The status of the call: 0 (zero) on success, else one of the
+ * kAU*Err values defined above.
+ *
+ * XXXRW: In Apple's bsm-8, these are marked __APPLE_API_PRIVATE.
+ */
+int audit_write_failure_na(short event_code, char *errmsg, int errret,
+ uid_t euid, gid_t egid, pid_t pid, au_tid_t *tid);
+
+/* END au_write() WRAPPERS */
+
+#ifdef __APPLE__
+/*
+ * audit_token_to_au32()
+ *
+ * @summary - Extract information from an audit_token_t, used to identify
+ * Mach tasks and senders of Mach messages as subjects to the audit system.
+ * audit_tokent_to_au32() is the only method that should be used to parse
+ * an audit_token_t, since its internal representation may change over
+ * time. A pointer parameter may be NULL if that information is not
+ * needed.
+ *
+ * @param atoken - the audit token containing the desired information
+ *
+ * @param auidp - Pointer to a uid_t; on return will be set to the task or
+ * sender's audit user ID
+ *
+ * @param euidp - Pointer to a uid_t; on return will be set to the task or
+ * sender's effective user ID
+ *
+ * @param egidp - Pointer to a gid_t; on return will be set to the task or
+ * sender's effective group ID
+ *
+ * @param ruidp - Pointer to a uid_t; on return will be set to the task or
+ * sender's real user ID
+ *
+ * @param rgidp - Pointer to a gid_t; on return will be set to the task or
+ * sender's real group ID
+ *
+ * @param pidp - Pointer to a pid_t; on return will be set to the task or
+ * sender's process ID
+ *
+ * @param asidp - Pointer to an au_asid_t; on return will be set to the
+ * task or sender's audit session ID
+ *
+ * @param tidp - Pointer to an au_tid_t; on return will be set to the task
+ * or sender's terminal ID
+ *
+ * XXXRW: In Apple's bsm-8, these are marked __APPLE_API_PRIVATE.
+ */
+void audit_token_to_au32(
+ audit_token_t atoken,
+ uid_t *auidp,
+ uid_t *euidp,
+ gid_t *egidp,
+ uid_t *ruidp,
+ gid_t *rgidp,
+ pid_t *pidp,
+ au_asid_t *asidp,
+ au_tid_t *tidp);
+#endif /* !__APPLE__ */
+
+/*
+ * Wrapper functions to auditon(2).
+ */
+int audit_get_car(char *path, size_t sz);
+int audit_get_class(au_evclass_map_t *evc_map, size_t sz);
+int audit_set_class(au_evclass_map_t *evc_map, size_t sz);
+int audit_get_cond(int *cond);
+int audit_set_cond(int *cond);
+int audit_get_cwd(char *path, size_t sz);
+int audit_get_fsize(au_fstat_t *fstat, size_t sz);
+int audit_set_fsize(au_fstat_t *fstat, size_t sz);
+int audit_get_kmask(au_mask_t *kmask, size_t sz);
+int audit_set_kmask(au_mask_t *kmask, size_t sz);
+int audit_get_kaudit(auditinfo_addr_t *aia, size_t sz);
+int audit_set_kaudit(auditinfo_addr_t *aia, size_t sz);
+int audit_set_pmask(auditpinfo_t *api, size_t sz);
+int audit_get_pinfo(auditpinfo_t *api, size_t sz);
+int audit_get_pinfo_addr(auditpinfo_addr_t *apia, size_t sz);
+int audit_get_policy(int *policy);
+int audit_set_policy(int *policy);
+int audit_get_qctrl(au_qctrl_t *qctrl, size_t sz);
+int audit_set_qctrl(au_qctrl_t *qctrl, size_t sz);
+int audit_get_sinfo_addr(auditinfo_addr_t *aia, size_t sz);
+int audit_get_stat(au_stat_t *stats, size_t sz);
+int audit_set_stat(au_stat_t *stats, size_t sz);
+int audit_send_trigger(int *trigger);
+
+__END_DECLS
+
+#endif /* !_LIBBSM_H_ */
Deleted: vendor/openbsm/1.2_alpha4/compat/clock_gettime.h
===================================================================
--- vendor/openbsm/dist/compat/clock_gettime.h 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/compat/clock_gettime.h 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,54 +0,0 @@
-/*-
- * Copyright (c) 2006 Robert N. M. Watson
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * $P4: //depot/projects/trustedbsd/openbsm/compat/clock_gettime.h#2 $
- */
-
-/*
- * Compatibility routines for clock_gettime(CLOCK_REALTIME, ...) for systems
- * that don't have it. We don't use clockid_t in order to avoid conflicts
- * with the native OS if it has one but not clock_gettime(). We also assume
- * that the sys/time.h include has already happened at this point, so we have
- * access to gettimeofday().
- */
-#include <errno.h>
-
-#define CLOCK_REALTIME 0x2d4e1588
-
-static inline int
-clock_gettime(int clock_id, struct timespec *ts)
-{
- struct timeval tv;
-
- if (clock_id != CLOCK_REALTIME) {
- errno = EINVAL;
- return (-1);
- }
- if (gettimeofday(&tv, NULL) < 0)
- return (-1);
- ts->tv_sec = tv.tv_sec;
- ts->tv_nsec = tv.tv_usec * 1000;
- return (0);
-}
Copied: vendor/openbsm/1.2_alpha4/compat/clock_gettime.h (from rev 11163, vendor/openbsm/dist/compat/clock_gettime.h)
===================================================================
--- vendor/openbsm/1.2_alpha4/compat/clock_gettime.h (rev 0)
+++ vendor/openbsm/1.2_alpha4/compat/clock_gettime.h 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,52 @@
+/*-
+ * Copyright (c) 2006 Robert N. M. Watson
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+/*
+ * Compatibility routines for clock_gettime(CLOCK_REALTIME, ...) for systems
+ * that don't have it. We don't use clockid_t in order to avoid conflicts
+ * with the native OS if it has one but not clock_gettime(). We also assume
+ * that the sys/time.h include has already happened at this point, so we have
+ * access to gettimeofday().
+ */
+#include <errno.h>
+
+#define CLOCK_REALTIME 0x2d4e1588
+
+static inline int
+clock_gettime(int clock_id, struct timespec *ts)
+{
+ struct timeval tv;
+
+ if (clock_id != CLOCK_REALTIME) {
+ errno = EINVAL;
+ return (-1);
+ }
+ if (gettimeofday(&tv, NULL) < 0)
+ return (-1);
+ ts->tv_sec = tv.tv_sec;
+ ts->tv_nsec = tv.tv_usec * 1000;
+ return (0);
+}
Copied: vendor/openbsm/1.2_alpha4/compat/closefrom.h (from rev 11163, vendor/openbsm/dist/compat/closefrom.h)
===================================================================
--- vendor/openbsm/1.2_alpha4/compat/closefrom.h (rev 0)
+++ vendor/openbsm/1.2_alpha4/compat/closefrom.h 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,51 @@
+/*-
+ * Copyright (c) 2012 The FreeBSD Foundation
+ * All rights reserved.
+ *
+ * This software was developed by Pawel Jakub Dawidek under sponsorship from
+ * the FreeBSD Foundation.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHORS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#ifndef _CLOSEFROM_H_
+#define _CLOSEFROM_H_
+
+#include <unistd.h>
+
+static void
+closefrom(int lowfd)
+{
+ int error, fd, maxfd;
+
+ error = errno;
+
+ maxfd = sysconf(_SC_OPEN_MAX);
+ if (maxfd < 0)
+ maxfd = 16384;
+ for (fd = lowfd; fd <= maxfd; fd++)
+ (void)close(fd);
+
+ errno = error;
+}
+
+#endif /* !_CLOSEFROM_H_ */
Copied: vendor/openbsm/1.2_alpha4/compat/compat.h (from rev 11163, vendor/openbsm/dist/compat/compat.h)
===================================================================
--- vendor/openbsm/1.2_alpha4/compat/compat.h (rev 0)
+++ vendor/openbsm/1.2_alpha4/compat/compat.h 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,57 @@
+/*-
+ * Copyright (c) 2012 The FreeBSD Foundation
+ * All rights reserved.
+ *
+ * This software was developed by Pawel Jakub Dawidek under sponsorship from
+ * the FreeBSD Foundation.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHORS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#ifndef _COMPAT_H_
+#define _COMPAT_H_
+
+#include <sys/types.h>
+#include <sys/socket.h>
+
+#ifndef MSG_NOSIGNAL
+#define MSG_NOSIGNAL 0
+#endif
+
+#ifndef __unused
+#define __unused __attribute__((__unused__))
+#endif
+
+#ifndef __packed
+#define __packed __attribute__((__packed__))
+#endif
+
+#ifndef __dead2
+#define __dead2 __attribute__((__noreturn__))
+#endif
+
+#ifndef __printflike
+#define __printflike(fmtarg, firstvararg) \
+ __attribute__((__format__ (__printf__, fmtarg, firstvararg)))
+#endif
+
+#endif /* !_COMPAT_H_ */
Deleted: vendor/openbsm/1.2_alpha4/compat/endian.h
===================================================================
--- vendor/openbsm/dist/compat/endian.h 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/compat/endian.h 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,259 +0,0 @@
-/*-
- * Copyright (c) 2002 Thomas Moestl <tmm at FreeBSD.org>
- * Copyright (c) 2005 Robert N. M. Watson
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * Derived from FreeBSD src/sys/sys/endian.h:1.6.
- * $P4: //depot/projects/trustedbsd/openbsm/compat/endian.h#7 $
- */
-
-#ifndef _COMPAT_ENDIAN_H_
-#define _COMPAT_ENDIAN_H_
-
-/*
- * Some systems will have the uint/int types defined here already, others
- * will need stdint.h.
- */
-#include <stdint.h>
-
-/*
- * Some operating systems do not yet have the more recent endian APIs that
- * permit encoding to and decoding from byte streams. For those systems, we
- * implement local non-optimized versions.
- */
-
-static __inline uint16_t
-bswap16(uint16_t int16)
-{
- const unsigned char *from;
- unsigned char *to;
- uint16_t t;
-
- from = (const unsigned char *) &int16;
- to = (unsigned char *) &t;
-
- to[0] = from[1];
- to[1] = from[0];
-
- return (t);
-}
-
-static __inline uint32_t
-bswap32(uint32_t int32)
-{
- const unsigned char *from;
- unsigned char *to;
- uint32_t t;
-
- from = (const unsigned char *) &int32;
- to = (unsigned char *) &t;
-
- to[0] = from[3];
- to[1] = from[2];
- to[2] = from[1];
- to[3] = from[0];
-
- return (t);
-}
-
-static __inline uint64_t
-bswap64(uint64_t int64)
-{
- const unsigned char *from;
- unsigned char *to;
- uint64_t t;
-
- from = (const unsigned char *) &int64;
- to = (unsigned char *) &t;
-
- to[0] = from[7];
- to[1] = from[6];
- to[2] = from[5];
- to[3] = from[4];
- to[4] = from[3];
- to[5] = from[2];
- to[6] = from[1];
- to[7] = from[0];
-
- return (t);
-}
-
-#if defined(BYTE_ORDER) && !defined(_BYTE_ORDER)
-#define _BYTE_ORDER BYTE_ORDER
-#endif
-#if !defined(_BYTE_ORDER)
-#error "Neither BYTE_ORDER nor _BYTE_ORDER defined"
-#endif
-
-#if defined(BIG_ENDIAN) && !defined(_BIG_ENDIAN)
-#define _BIG_ENDIAN BIG_ENDIAN
-#endif
-
-#if defined(LITTLE_ENDIAN) && !defined(_LITTLE_ENDIAN)
-#define _LITTLE_ENDIAN LITTLE_ENDIAN
-#endif
-
-/*
- * Host to big endian, host to little endian, big endian to host, and little
- * endian to host byte order functions as detailed in byteorder(9).
- */
-#if _BYTE_ORDER == _LITTLE_ENDIAN
-#define htobe16(x) bswap16((x))
-#define htobe32(x) bswap32((x))
-#define htobe64(x) bswap64((x))
-#define htole16(x) ((uint16_t)(x))
-#define htole32(x) ((uint32_t)(x))
-#define htole64(x) ((uint64_t)(x))
-
-#define be16toh(x) bswap16((x))
-#define be32toh(x) bswap32((x))
-#define be64toh(x) bswap64((x))
-#define le16toh(x) ((uint16_t)(x))
-#define le32toh(x) ((uint32_t)(x))
-#define le64toh(x) ((uint64_t)(x))
-#else /* _BYTE_ORDER != _LITTLE_ENDIAN */
-#define htobe16(x) ((uint16_t)(x))
-#define htobe32(x) ((uint32_t)(x))
-#define htobe64(x) ((uint64_t)(x))
-#define htole16(x) bswap16((x))
-#define htole32(x) bswap32((x))
-#define htole64(x) bswap64((x))
-
-#define be16toh(x) ((uint16_t)(x))
-#define be32toh(x) ((uint32_t)(x))
-#define be64toh(x) ((uint64_t)(x))
-#define le16toh(x) bswap16((x))
-#define le32toh(x) bswap32((x))
-#define le64toh(x) bswap64((x))
-#endif /* _BYTE_ORDER == _LITTLE_ENDIAN */
-
-/* Alignment-agnostic encode/decode bytestream to/from little/big endian. */
-
-static __inline uint16_t
-be16dec(const void *pp)
-{
- unsigned char const *p = (unsigned char const *)pp;
-
- return ((p[0] << 8) | p[1]);
-}
-
-static __inline uint32_t
-be32dec(const void *pp)
-{
- unsigned char const *p = (unsigned char const *)pp;
-
- return ((p[0] << 24) | (p[1] << 16) | (p[2] << 8) | p[3]);
-}
-
-static __inline uint64_t
-be64dec(const void *pp)
-{
- unsigned char const *p = (unsigned char const *)pp;
-
- return (((uint64_t)be32dec(p) << 32) | be32dec(p + 4));
-}
-
-static __inline uint16_t
-le16dec(const void *pp)
-{
- unsigned char const *p = (unsigned char const *)pp;
-
- return ((p[1] << 8) | p[0]);
-}
-
-static __inline uint32_t
-le32dec(const void *pp)
-{
- unsigned char const *p = (unsigned char const *)pp;
-
- return ((p[3] << 24) | (p[2] << 16) | (p[1] << 8) | p[0]);
-}
-
-static __inline uint64_t
-le64dec(const void *pp)
-{
- unsigned char const *p = (unsigned char const *)pp;
-
- return (((uint64_t)le32dec(p + 4) << 32) | le32dec(p));
-}
-
-static __inline void
-be16enc(void *pp, uint16_t u)
-{
- unsigned char *p = (unsigned char *)pp;
-
- p[0] = (u >> 8) & 0xff;
- p[1] = u & 0xff;
-}
-
-static __inline void
-be32enc(void *pp, uint32_t u)
-{
- unsigned char *p = (unsigned char *)pp;
-
- p[0] = (u >> 24) & 0xff;
- p[1] = (u >> 16) & 0xff;
- p[2] = (u >> 8) & 0xff;
- p[3] = u & 0xff;
-}
-
-static __inline void
-be64enc(void *pp, uint64_t u)
-{
- unsigned char *p = (unsigned char *)pp;
-
- be32enc(p, u >> 32);
- be32enc(p + 4, u & 0xffffffff);
-}
-
-static __inline void
-le16enc(void *pp, uint16_t u)
-{
- unsigned char *p = (unsigned char *)pp;
-
- p[0] = u & 0xff;
- p[1] = (u >> 8) & 0xff;
-}
-
-static __inline void
-le32enc(void *pp, uint32_t u)
-{
- unsigned char *p = (unsigned char *)pp;
-
- p[0] = u & 0xff;
- p[1] = (u >> 8) & 0xff;
- p[2] = (u >> 16) & 0xff;
- p[3] = (u >> 24) & 0xff;
-}
-
-static __inline void
-le64enc(void *pp, uint64_t u)
-{
- unsigned char *p = (unsigned char *)pp;
-
- le32enc(p, u & 0xffffffff);
- le32enc(p + 4, u >> 32);
-}
-
-#endif /* _COMPAT_ENDIAN_H_ */
Copied: vendor/openbsm/1.2_alpha4/compat/endian.h (from rev 11163, vendor/openbsm/dist/compat/endian.h)
===================================================================
--- vendor/openbsm/1.2_alpha4/compat/endian.h (rev 0)
+++ vendor/openbsm/1.2_alpha4/compat/endian.h 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,155 @@
+/*-
+ * Copyright (c) 2002 Thomas Moestl <tmm at FreeBSD.org>
+ * Copyright (c) 2005 Robert N. M. Watson
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * Derived from FreeBSD src/sys/sys/endian.h:1.6.
+ */
+
+#ifndef _COMPAT_ENDIAN_H_
+#define _COMPAT_ENDIAN_H_
+
+/*
+ * Some systems will have the uint/int types defined here already, others
+ * will need stdint.h.
+ */
+#ifdef HAVE_STDINT_H
+#include <stdint.h>
+#endif
+
+/*
+ * Some operating systems do not yet have the more recent endian APIs that
+ * permit encoding to and decoding from byte streams. For those systems, we
+ * implement local non-optimized versions.
+ */
+
+static __inline uint16_t
+bswap16(uint16_t int16)
+{
+ const unsigned char *from;
+ unsigned char *to;
+ uint16_t t;
+
+ from = (const unsigned char *) &int16;
+ to = (unsigned char *) &t;
+
+ to[0] = from[1];
+ to[1] = from[0];
+
+ return (t);
+}
+
+static __inline uint32_t
+bswap32(uint32_t int32)
+{
+ const unsigned char *from;
+ unsigned char *to;
+ uint32_t t;
+
+ from = (const unsigned char *) &int32;
+ to = (unsigned char *) &t;
+
+ to[0] = from[3];
+ to[1] = from[2];
+ to[2] = from[1];
+ to[3] = from[0];
+
+ return (t);
+}
+
+static __inline uint64_t
+bswap64(uint64_t int64)
+{
+ const unsigned char *from;
+ unsigned char *to;
+ uint64_t t;
+
+ from = (const unsigned char *) &int64;
+ to = (unsigned char *) &t;
+
+ to[0] = from[7];
+ to[1] = from[6];
+ to[2] = from[5];
+ to[3] = from[4];
+ to[4] = from[3];
+ to[5] = from[2];
+ to[6] = from[1];
+ to[7] = from[0];
+
+ return (t);
+}
+
+#if defined(BYTE_ORDER) && !defined(_BYTE_ORDER)
+#define _BYTE_ORDER BYTE_ORDER
+#endif
+#if !defined(_BYTE_ORDER)
+#error "Neither BYTE_ORDER nor _BYTE_ORDER defined"
+#endif
+
+#if defined(BIG_ENDIAN) && !defined(_BIG_ENDIAN)
+#define _BIG_ENDIAN BIG_ENDIAN
+#endif
+
+#if defined(LITTLE_ENDIAN) && !defined(_LITTLE_ENDIAN)
+#define _LITTLE_ENDIAN LITTLE_ENDIAN
+#endif
+
+/* XXX: Hack. */
+#ifndef htobe16
+/*
+ * Host to big endian, host to little endian, big endian to host, and little
+ * endian to host byte order functions as detailed in byteorder(9).
+ */
+#if _BYTE_ORDER == _LITTLE_ENDIAN
+#define htobe16(x) bswap16((x))
+#define htobe32(x) bswap32((x))
+#define htobe64(x) bswap64((x))
+#define htole16(x) ((uint16_t)(x))
+#define htole32(x) ((uint32_t)(x))
+#define htole64(x) ((uint64_t)(x))
+
+#define be16toh(x) bswap16((x))
+#define be32toh(x) bswap32((x))
+#define be64toh(x) bswap64((x))
+#define le16toh(x) ((uint16_t)(x))
+#define le32toh(x) ((uint32_t)(x))
+#define le64toh(x) ((uint64_t)(x))
+#else /* _BYTE_ORDER != _LITTLE_ENDIAN */
+#define htobe16(x) ((uint16_t)(x))
+#define htobe32(x) ((uint32_t)(x))
+#define htobe64(x) ((uint64_t)(x))
+#define htole16(x) bswap16((x))
+#define htole32(x) bswap32((x))
+#define htole64(x) bswap64((x))
+
+#define be16toh(x) ((uint16_t)(x))
+#define be32toh(x) ((uint32_t)(x))
+#define be64toh(x) ((uint64_t)(x))
+#define le16toh(x) bswap16((x))
+#define le32toh(x) bswap32((x))
+#define le64toh(x) bswap64((x))
+#endif /* _BYTE_ORDER == _LITTLE_ENDIAN */
+#endif
+
+#endif /* _COMPAT_ENDIAN_H_ */
Copied: vendor/openbsm/1.2_alpha4/compat/endian_enc.h (from rev 11163, vendor/openbsm/dist/compat/endian_enc.h)
===================================================================
--- vendor/openbsm/1.2_alpha4/compat/endian_enc.h (rev 0)
+++ vendor/openbsm/1.2_alpha4/compat/endian_enc.h 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,149 @@
+/*-
+ * Copyright (c) 2002 Thomas Moestl <tmm at FreeBSD.org>
+ * Copyright (c) 2005 Robert N. M. Watson
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * Derived from FreeBSD src/sys/sys/endian.h:1.6.
+ */
+
+#ifndef _COMPAT_ENDIAN_ENC_H_
+#define _COMPAT_ENDIAN_ENC_H_
+
+/*
+ * Some systems will have the uint/int types defined here already, others
+ * will need stdint.h.
+ */
+#ifdef HAVE_STDINT_H
+#include <stdint.h>
+#endif
+
+/* Alignment-agnostic encode/decode bytestream to/from little/big endian. */
+
+static __inline uint16_t
+be16dec(const void *pp)
+{
+ unsigned char const *p = (unsigned char const *)pp;
+
+ return ((p[0] << 8) | p[1]);
+}
+
+static __inline uint32_t
+be32dec(const void *pp)
+{
+ unsigned char const *p = (unsigned char const *)pp;
+
+ return ((p[0] << 24) | (p[1] << 16) | (p[2] << 8) | p[3]);
+}
+
+static __inline uint64_t
+be64dec(const void *pp)
+{
+ unsigned char const *p = (unsigned char const *)pp;
+
+ return (((uint64_t)be32dec(p) << 32) | be32dec(p + 4));
+}
+
+static __inline uint16_t
+le16dec(const void *pp)
+{
+ unsigned char const *p = (unsigned char const *)pp;
+
+ return ((p[1] << 8) | p[0]);
+}
+
+static __inline uint32_t
+le32dec(const void *pp)
+{
+ unsigned char const *p = (unsigned char const *)pp;
+
+ return ((p[3] << 24) | (p[2] << 16) | (p[1] << 8) | p[0]);
+}
+
+static __inline uint64_t
+le64dec(const void *pp)
+{
+ unsigned char const *p = (unsigned char const *)pp;
+
+ return (((uint64_t)le32dec(p + 4) << 32) | le32dec(p));
+}
+
+static __inline void
+be16enc(void *pp, uint16_t u)
+{
+ unsigned char *p = (unsigned char *)pp;
+
+ p[0] = (u >> 8) & 0xff;
+ p[1] = u & 0xff;
+}
+
+static __inline void
+be32enc(void *pp, uint32_t u)
+{
+ unsigned char *p = (unsigned char *)pp;
+
+ p[0] = (u >> 24) & 0xff;
+ p[1] = (u >> 16) & 0xff;
+ p[2] = (u >> 8) & 0xff;
+ p[3] = u & 0xff;
+}
+
+static __inline void
+be64enc(void *pp, uint64_t u)
+{
+ unsigned char *p = (unsigned char *)pp;
+
+ be32enc(p, u >> 32);
+ be32enc(p + 4, u & 0xffffffff);
+}
+
+static __inline void
+le16enc(void *pp, uint16_t u)
+{
+ unsigned char *p = (unsigned char *)pp;
+
+ p[0] = u & 0xff;
+ p[1] = (u >> 8) & 0xff;
+}
+
+static __inline void
+le32enc(void *pp, uint32_t u)
+{
+ unsigned char *p = (unsigned char *)pp;
+
+ p[0] = u & 0xff;
+ p[1] = (u >> 8) & 0xff;
+ p[2] = (u >> 16) & 0xff;
+ p[3] = (u >> 24) & 0xff;
+}
+
+static __inline void
+le64enc(void *pp, uint64_t u)
+{
+ unsigned char *p = (unsigned char *)pp;
+
+ le32enc(p, u & 0xffffffff);
+ le32enc(p + 4, u >> 32);
+}
+
+#endif /* _COMPAT_ENDIAN_ENC_H_ */
Copied: vendor/openbsm/1.2_alpha4/compat/flopen.h (from rev 11163, vendor/openbsm/dist/compat/flopen.h)
===================================================================
--- vendor/openbsm/1.2_alpha4/compat/flopen.h (rev 0)
+++ vendor/openbsm/1.2_alpha4/compat/flopen.h 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,102 @@
+/*-
+ * Copyright (c) 2007 Dag-Erling Coïdan Smørgrav
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer
+ * in this position and unchanged.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * Derived from FreeBSD head/lib/libutil/flopen.c r193591
+ */
+
+#include <sys/file.h>
+#include <sys/stat.h>
+
+#include <errno.h>
+#include <stdarg.h>
+#include <unistd.h>
+
+static int
+flopen(const char *path, int flags, ...)
+{
+ int fd, operation, serrno, trunc;
+ struct stat sb, fsb;
+ mode_t mode;
+
+#ifdef O_EXLOCK
+ flags &= ~O_EXLOCK;
+#endif
+
+ mode = 0;
+ if (flags & O_CREAT) {
+ va_list ap;
+
+ va_start(ap, flags);
+ mode = (mode_t)va_arg(ap, int); /* mode_t promoted to int */
+ va_end(ap);
+ }
+
+ operation = LOCK_EX;
+ if (flags & O_NONBLOCK)
+ operation |= LOCK_NB;
+
+ trunc = (flags & O_TRUNC);
+ flags &= ~O_TRUNC;
+
+ for (;;) {
+ if ((fd = open(path, flags, mode)) == -1)
+ /* non-existent or no access */
+ return (-1);
+ if (flock(fd, operation) == -1) {
+ /* unsupported or interrupted */
+ serrno = errno;
+ (void)close(fd);
+ errno = serrno;
+ return (-1);
+ }
+ if (stat(path, &sb) == -1) {
+ /* disappeared from under our feet */
+ (void)close(fd);
+ continue;
+ }
+ if (fstat(fd, &fsb) == -1) {
+ /* can't happen [tm] */
+ serrno = errno;
+ (void)close(fd);
+ errno = serrno;
+ return (-1);
+ }
+ if (sb.st_dev != fsb.st_dev ||
+ sb.st_ino != fsb.st_ino) {
+ /* changed under our feet */
+ (void)close(fd);
+ continue;
+ }
+ if (trunc && ftruncate(fd, 0) != 0) {
+ /* can't happen [tm] */
+ serrno = errno;
+ (void)close(fd);
+ errno = serrno;
+ return (-1);
+ }
+ return (fd);
+ }
+}
Copied: vendor/openbsm/1.2_alpha4/compat/pidfile.h (from rev 11163, vendor/openbsm/dist/compat/pidfile.h)
===================================================================
--- vendor/openbsm/1.2_alpha4/compat/pidfile.h (rev 0)
+++ vendor/openbsm/1.2_alpha4/compat/pidfile.h 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,292 @@
+/*-
+ * Copyright (c) 2005 Pawel Jakub Dawidek <pjd at FreeBSD.org>
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHORS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * Derived from FreeBSD head/lib/libutil/pidfile.c r231938
+ */
+
+#include <sys/param.h>
+#include <sys/file.h>
+#include <sys/stat.h>
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <fcntl.h>
+#include <string.h>
+#include <time.h>
+#include <err.h>
+#include <errno.h>
+
+#include "flopen.h"
+
+struct pidfh {
+ int pf_fd;
+ char pf_path[MAXPATHLEN + 1];
+ dev_t pf_dev;
+ ino_t pf_ino;
+};
+
+static int _pidfile_remove(struct pidfh *pfh, int freeit);
+
+static int
+pidfile_verify(const struct pidfh *pfh)
+{
+ struct stat sb;
+
+ if (pfh == NULL || pfh->pf_fd == -1)
+ return (EINVAL);
+ /*
+ * Check remembered descriptor.
+ */
+ if (fstat(pfh->pf_fd, &sb) == -1)
+ return (errno);
+ if (sb.st_dev != pfh->pf_dev || sb.st_ino != pfh->pf_ino)
+ return (EINVAL);
+ return (0);
+}
+
+static int
+pidfile_read(const char *path, pid_t *pidptr)
+{
+ char buf[16], *endptr;
+ int error, fd, i;
+
+ fd = open(path, O_RDONLY);
+ if (fd == -1)
+ return (errno);
+
+ i = read(fd, buf, sizeof(buf) - 1);
+ error = errno; /* Remember errno in case close() wants to change it. */
+ close(fd);
+ if (i == -1)
+ return (error);
+ else if (i == 0)
+ return (EAGAIN);
+ buf[i] = '\0';
+
+ *pidptr = strtol(buf, &endptr, 10);
+ if (endptr != &buf[i])
+ return (EINVAL);
+
+ return (0);
+}
+
+static struct pidfh *
+pidfile_open(const char *path, mode_t mode, pid_t *pidptr)
+{
+ struct pidfh *pfh;
+ struct stat sb;
+ int error, fd, len, count;
+ struct timespec rqtp;
+
+ if (pidptr != NULL)
+ *pidptr = -1;
+
+ if (path == NULL)
+ return (NULL);
+
+ pfh = malloc(sizeof(*pfh));
+ if (pfh == NULL)
+ return (NULL);
+
+ len = snprintf(pfh->pf_path, sizeof(pfh->pf_path),
+ "%s", path);
+ if (len >= (int)sizeof(pfh->pf_path)) {
+ free(pfh);
+ errno = ENAMETOOLONG;
+ return (NULL);
+ }
+
+ /*
+ * Open the PID file and obtain exclusive lock.
+ * We truncate PID file here only to remove old PID immediatelly,
+ * PID file will be truncated again in pidfile_write(), so
+ * pidfile_write() can be called multiple times.
+ */
+ fd = flopen(pfh->pf_path,
+#ifdef O_CLOEXEC
+ O_WRONLY | O_CREAT | O_TRUNC | O_NONBLOCK | O_CLOEXEC, mode);
+#else
+ O_WRONLY | O_CREAT | O_TRUNC | O_NONBLOCK, mode);
+#endif
+ if (fd == -1) {
+ if (errno == EWOULDBLOCK && pidptr != NULL) {
+ count = 20;
+ rqtp.tv_sec = 0;
+ rqtp.tv_nsec = 5000000;
+ for (;;) {
+ errno = pidfile_read(pfh->pf_path, pidptr);
+ if (errno != EAGAIN || --count == 0)
+ break;
+ nanosleep(&rqtp, 0);
+ }
+ if (errno == EAGAIN)
+ *pidptr = -1;
+ if (errno == 0 || errno == EAGAIN)
+ errno = EEXIST;
+ }
+ free(pfh);
+ return (NULL);
+ }
+
+#ifndef O_CLOEXEC
+ if (fcntl(fd, F_SETFD, FD_CLOEXEC) == -1) {
+ error = errno;
+ unlink(pfh->pf_path);
+ close(fd);
+ free(pfh);
+ errno = error;
+ return (NULL);
+ }
+#endif
+
+ /*
+ * Remember file information, so in pidfile_write() we are sure we write
+ * to the proper descriptor.
+ */
+ if (fstat(fd, &sb) == -1) {
+ error = errno;
+ unlink(pfh->pf_path);
+ close(fd);
+ free(pfh);
+ errno = error;
+ return (NULL);
+ }
+
+ pfh->pf_fd = fd;
+ pfh->pf_dev = sb.st_dev;
+ pfh->pf_ino = sb.st_ino;
+
+ return (pfh);
+}
+
+static int
+pidfile_write(struct pidfh *pfh)
+{
+ char pidstr[16];
+ int error, fd;
+
+ /*
+ * Check remembered descriptor, so we don't overwrite some other
+ * file if pidfile was closed and descriptor reused.
+ */
+ errno = pidfile_verify(pfh);
+ if (errno != 0) {
+ /*
+ * Don't close descriptor, because we are not sure if it's ours.
+ */
+ return (-1);
+ }
+ fd = pfh->pf_fd;
+
+ /*
+ * Truncate PID file, so multiple calls of pidfile_write() are allowed.
+ */
+ if (ftruncate(fd, 0) == -1) {
+ error = errno;
+ _pidfile_remove(pfh, 0);
+ errno = error;
+ return (-1);
+ }
+
+ snprintf(pidstr, sizeof(pidstr), "%u", getpid());
+ if (pwrite(fd, pidstr, strlen(pidstr), 0) != (ssize_t)strlen(pidstr)) {
+ error = errno;
+ _pidfile_remove(pfh, 0);
+ errno = error;
+ return (-1);
+ }
+
+ return (0);
+}
+
+static int
+pidfile_close(struct pidfh *pfh)
+{
+ int error;
+
+ error = pidfile_verify(pfh);
+ if (error != 0) {
+ errno = error;
+ return (-1);
+ }
+
+ if (close(pfh->pf_fd) == -1)
+ error = errno;
+ free(pfh);
+ if (error != 0) {
+ errno = error;
+ return (-1);
+ }
+ return (0);
+}
+
+static int
+_pidfile_remove(struct pidfh *pfh, int freeit)
+{
+ int error;
+
+ error = pidfile_verify(pfh);
+ if (error != 0) {
+ errno = error;
+ return (-1);
+ }
+
+ if (unlink(pfh->pf_path) == -1)
+ error = errno;
+ if (close(pfh->pf_fd) == -1) {
+ if (error == 0)
+ error = errno;
+ }
+ if (freeit)
+ free(pfh);
+ else
+ pfh->pf_fd = -1;
+ if (error != 0) {
+ errno = error;
+ return (-1);
+ }
+ return (0);
+}
+
+static int
+pidfile_remove(struct pidfh *pfh)
+{
+
+ return (_pidfile_remove(pfh, 1));
+}
+
+#if 0
+static int
+pidfile_fileno(const struct pidfh *pfh)
+{
+
+ if (pfh == NULL || pfh->pf_fd == -1) {
+ errno = EINVAL;
+ return (-1);
+ }
+ return (pfh->pf_fd);
+}
+#endif
Deleted: vendor/openbsm/1.2_alpha4/compat/queue.h
===================================================================
--- vendor/openbsm/dist/compat/queue.h 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/compat/queue.h 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,542 +0,0 @@
-/*-
- * Copyright (c) 1991, 1993
- * The Regents of the University of California. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 4. Neither the name of the University nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * @(#)queue.h 8.5 (Berkeley) 8/20/94
- *
- * Derived from FreeBSD src/sys/sys/queue.h:1.63.
- * $P4: //depot/projects/trustedbsd/openbsm/compat/queue.h#3 $
- */
-
-#ifndef _COMPAT_QUEUE_H_
-#define _COMPAT_QUEUE_H_
-
-#include <sys/cdefs.h>
-
-/*
- * This file defines four types of data structures: singly-linked lists,
- * singly-linked tail queues, lists and tail queues.
- *
- * A singly-linked list is headed by a single forward pointer. The elements
- * are singly linked for minimum space and pointer manipulation overhead at
- * the expense of O(n) removal for arbitrary elements. New elements can be
- * added to the list after an existing element or at the head of the list.
- * Elements being removed from the head of the list should use the explicit
- * macro for this purpose for optimum efficiency. A singly-linked list may
- * only be traversed in the forward direction. Singly-linked lists are ideal
- * for applications with large datasets and few or no removals or for
- * implementing a LIFO queue.
- *
- * A singly-linked tail queue is headed by a pair of pointers, one to the
- * head of the list and the other to the tail of the list. The elements are
- * singly linked for minimum space and pointer manipulation overhead at the
- * expense of O(n) removal for arbitrary elements. New elements can be added
- * to the list after an existing element, at the head of the list, or at the
- * end of the list. Elements being removed from the head of the tail queue
- * should use the explicit macro for this purpose for optimum efficiency.
- * A singly-linked tail queue may only be traversed in the forward direction.
- * Singly-linked tail queues are ideal for applications with large datasets
- * and few or no removals or for implementing a FIFO queue.
- *
- * A list is headed by a single forward pointer (or an array of forward
- * pointers for a hash table header). The elements are doubly linked
- * so that an arbitrary element can be removed without a need to
- * traverse the list. New elements can be added to the list before
- * or after an existing element or at the head of the list. A list
- * may only be traversed in the forward direction.
- *
- * A tail queue is headed by a pair of pointers, one to the head of the
- * list and the other to the tail of the list. The elements are doubly
- * linked so that an arbitrary element can be removed without a need to
- * traverse the list. New elements can be added to the list before or
- * after an existing element, at the head of the list, or at the end of
- * the list. A tail queue may be traversed in either direction.
- *
- * For details on the use of these macros, see the queue(3) manual page.
- *
- *
- * SLIST LIST STAILQ TAILQ
- * _HEAD + + + +
- * _HEAD_INITIALIZER + + + +
- * _ENTRY + + + +
- * _INIT + + + +
- * _EMPTY + + + +
- * _FIRST + + + +
- * _NEXT + + + +
- * _PREV - - - +
- * _LAST - - + +
- * _FOREACH + + + +
- * _FOREACH_SAFE + + + +
- * _FOREACH_REVERSE - - - +
- * _FOREACH_REVERSE_SAFE - - - +
- * _INSERT_HEAD + + + +
- * _INSERT_BEFORE - + - +
- * _INSERT_AFTER + + + +
- * _INSERT_TAIL - - + +
- * _CONCAT - - + +
- * _REMOVE_HEAD + - + -
- * _REMOVE + + + +
- *
- */
-#ifdef QUEUE_MACRO_DEBUG
-/* Store the last 2 places the queue element or head was altered */
-struct qm_trace {
- char * lastfile;
- int lastline;
- char * prevfile;
- int prevline;
-};
-
-#define TRACEBUF struct qm_trace trace;
-#define TRASHIT(x) do {(x) = (void *)-1;} while (0)
-
-#define QMD_TRACE_HEAD(head) do { \
- (head)->trace.prevline = (head)->trace.lastline; \
- (head)->trace.prevfile = (head)->trace.lastfile; \
- (head)->trace.lastline = __LINE__; \
- (head)->trace.lastfile = __FILE__; \
-} while (0)
-
-#define QMD_TRACE_ELEM(elem) do { \
- (elem)->trace.prevline = (elem)->trace.lastline; \
- (elem)->trace.prevfile = (elem)->trace.lastfile; \
- (elem)->trace.lastline = __LINE__; \
- (elem)->trace.lastfile = __FILE__; \
-} while (0)
-
-#else
-#define QMD_TRACE_ELEM(elem)
-#define QMD_TRACE_HEAD(head)
-#define TRACEBUF
-#define TRASHIT(x)
-#endif /* QUEUE_MACRO_DEBUG */
-
-/*
- * Singly-linked List declarations.
- */
-#define SLIST_HEAD(name, type) \
-struct name { \
- struct type *slh_first; /* first element */ \
-}
-
-#define SLIST_HEAD_INITIALIZER(head) \
- { NULL }
-
-#define SLIST_ENTRY(type) \
-struct { \
- struct type *sle_next; /* next element */ \
-}
-
-/*
- * Singly-linked List functions.
- */
-#define SLIST_EMPTY(head) ((head)->slh_first == NULL)
-
-#define SLIST_FIRST(head) ((head)->slh_first)
-
-#define SLIST_FOREACH(var, head, field) \
- for ((var) = SLIST_FIRST((head)); \
- (var); \
- (var) = SLIST_NEXT((var), field))
-
-#define SLIST_FOREACH_SAFE(var, head, field, tvar) \
- for ((var) = SLIST_FIRST((head)); \
- (var) && ((tvar) = SLIST_NEXT((var), field), 1); \
- (var) = (tvar))
-
-#define SLIST_FOREACH_PREVPTR(var, varp, head, field) \
- for ((varp) = &SLIST_FIRST((head)); \
- ((var) = *(varp)) != NULL; \
- (varp) = &SLIST_NEXT((var), field))
-
-#define SLIST_INIT(head) do { \
- SLIST_FIRST((head)) = NULL; \
-} while (0)
-
-#define SLIST_INSERT_AFTER(slistelm, elm, field) do { \
- SLIST_NEXT((elm), field) = SLIST_NEXT((slistelm), field); \
- SLIST_NEXT((slistelm), field) = (elm); \
-} while (0)
-
-#define SLIST_INSERT_HEAD(head, elm, field) do { \
- SLIST_NEXT((elm), field) = SLIST_FIRST((head)); \
- SLIST_FIRST((head)) = (elm); \
-} while (0)
-
-#define SLIST_NEXT(elm, field) ((elm)->field.sle_next)
-
-#define SLIST_REMOVE(head, elm, type, field) do { \
- if (SLIST_FIRST((head)) == (elm)) { \
- SLIST_REMOVE_HEAD((head), field); \
- } \
- else { \
- struct type *curelm = SLIST_FIRST((head)); \
- while (SLIST_NEXT(curelm, field) != (elm)) \
- curelm = SLIST_NEXT(curelm, field); \
- SLIST_NEXT(curelm, field) = \
- SLIST_NEXT(SLIST_NEXT(curelm, field), field); \
- } \
- TRASHIT((elm)->field.sle_next); \
-} while (0)
-
-#define SLIST_REMOVE_HEAD(head, field) do { \
- SLIST_FIRST((head)) = SLIST_NEXT(SLIST_FIRST((head)), field); \
-} while (0)
-
-/*
- * Singly-linked Tail queue declarations.
- */
-#define STAILQ_HEAD(name, type) \
-struct name { \
- struct type *stqh_first;/* first element */ \
- struct type **stqh_last;/* addr of last next element */ \
-}
-
-#define STAILQ_HEAD_INITIALIZER(head) \
- { NULL, &(head).stqh_first }
-
-#define STAILQ_ENTRY(type) \
-struct { \
- struct type *stqe_next; /* next element */ \
-}
-
-/*
- * Singly-linked Tail queue functions.
- */
-#define STAILQ_CONCAT(head1, head2) do { \
- if (!STAILQ_EMPTY((head2))) { \
- *(head1)->stqh_last = (head2)->stqh_first; \
- (head1)->stqh_last = (head2)->stqh_last; \
- STAILQ_INIT((head2)); \
- } \
-} while (0)
-
-#define STAILQ_EMPTY(head) ((head)->stqh_first == NULL)
-
-#define STAILQ_FIRST(head) ((head)->stqh_first)
-
-#define STAILQ_FOREACH(var, head, field) \
- for((var) = STAILQ_FIRST((head)); \
- (var); \
- (var) = STAILQ_NEXT((var), field))
-
-
-#define STAILQ_FOREACH_SAFE(var, head, field, tvar) \
- for ((var) = STAILQ_FIRST((head)); \
- (var) && ((tvar) = STAILQ_NEXT((var), field), 1); \
- (var) = (tvar))
-
-#define STAILQ_INIT(head) do { \
- STAILQ_FIRST((head)) = NULL; \
- (head)->stqh_last = &STAILQ_FIRST((head)); \
-} while (0)
-
-#define STAILQ_INSERT_AFTER(head, tqelm, elm, field) do { \
- if ((STAILQ_NEXT((elm), field) = STAILQ_NEXT((tqelm), field)) == NULL)\
- (head)->stqh_last = &STAILQ_NEXT((elm), field); \
- STAILQ_NEXT((tqelm), field) = (elm); \
-} while (0)
-
-#define STAILQ_INSERT_HEAD(head, elm, field) do { \
- if ((STAILQ_NEXT((elm), field) = STAILQ_FIRST((head))) == NULL) \
- (head)->stqh_last = &STAILQ_NEXT((elm), field); \
- STAILQ_FIRST((head)) = (elm); \
-} while (0)
-
-#define STAILQ_INSERT_TAIL(head, elm, field) do { \
- STAILQ_NEXT((elm), field) = NULL; \
- *(head)->stqh_last = (elm); \
- (head)->stqh_last = &STAILQ_NEXT((elm), field); \
-} while (0)
-
-#define STAILQ_LAST(head, type, field) \
- (STAILQ_EMPTY((head)) ? \
- NULL : \
- ((struct type *) \
- ((char *)((head)->stqh_last) - __offsetof(struct type, field))))
-
-#define STAILQ_NEXT(elm, field) ((elm)->field.stqe_next)
-
-#define STAILQ_REMOVE(head, elm, type, field) do { \
- if (STAILQ_FIRST((head)) == (elm)) { \
- STAILQ_REMOVE_HEAD((head), field); \
- } \
- else { \
- struct type *curelm = STAILQ_FIRST((head)); \
- while (STAILQ_NEXT(curelm, field) != (elm)) \
- curelm = STAILQ_NEXT(curelm, field); \
- if ((STAILQ_NEXT(curelm, field) = \
- STAILQ_NEXT(STAILQ_NEXT(curelm, field), field)) == NULL)\
- (head)->stqh_last = &STAILQ_NEXT((curelm), field);\
- } \
- TRASHIT((elm)->field.stqe_next); \
-} while (0)
-
-#define STAILQ_REMOVE_HEAD(head, field) do { \
- if ((STAILQ_FIRST((head)) = \
- STAILQ_NEXT(STAILQ_FIRST((head)), field)) == NULL) \
- (head)->stqh_last = &STAILQ_FIRST((head)); \
-} while (0)
-
-#define STAILQ_REMOVE_HEAD_UNTIL(head, elm, field) do { \
- if ((STAILQ_FIRST((head)) = STAILQ_NEXT((elm), field)) == NULL) \
- (head)->stqh_last = &STAILQ_FIRST((head)); \
-} while (0)
-
-/*
- * List declarations.
- */
-#define LIST_HEAD(name, type) \
-struct name { \
- struct type *lh_first; /* first element */ \
-}
-
-#define LIST_HEAD_INITIALIZER(head) \
- { NULL }
-
-#define LIST_ENTRY(type) \
-struct { \
- struct type *le_next; /* next element */ \
- struct type **le_prev; /* address of previous next element */ \
-}
-
-/*
- * List functions.
- */
-
-#if (defined(_KERNEL) && defined(INVARIANTS)) || defined(QUEUE_MACRO_DEBUG)
-#define QMD_LIST_CHECK_HEAD(head, field) do { \
- if (LIST_FIRST((head)) != NULL && \
- LIST_FIRST((head))->field.le_prev != \
- &LIST_FIRST((head))) \
- panic("Bad list head %p first->prev != head", (head)); \
-} while (0)
-
-#define QMD_LIST_CHECK_NEXT(elm, field) do { \
- if (LIST_NEXT((elm), field) != NULL && \
- LIST_NEXT((elm), field)->field.le_prev != \
- &((elm)->field.le_next)) \
- panic("Bad link elm %p next->prev != elm", (elm)); \
-} while (0)
-
-#define QMD_LIST_CHECK_PREV(elm, field) do { \
- if (*(elm)->field.le_prev != (elm)) \
- panic("Bad link elm %p prev->next != elm", (elm)); \
-} while (0)
-#else
-#define QMD_LIST_CHECK_HEAD(head, field)
-#define QMD_LIST_CHECK_NEXT(elm, field)
-#define QMD_LIST_CHECK_PREV(elm, field)
-#endif /* (_KERNEL && INVARIANTS) || QUEUE_MACRO_DEBUG */
-
-#define LIST_EMPTY(head) ((head)->lh_first == NULL)
-
-#define LIST_FIRST(head) ((head)->lh_first)
-
-#define LIST_FOREACH(var, head, field) \
- for ((var) = LIST_FIRST((head)); \
- (var); \
- (var) = LIST_NEXT((var), field))
-
-#define LIST_FOREACH_SAFE(var, head, field, tvar) \
- for ((var) = LIST_FIRST((head)); \
- (var) && ((tvar) = LIST_NEXT((var), field), 1); \
- (var) = (tvar))
-
-#define LIST_INIT(head) do { \
- LIST_FIRST((head)) = NULL; \
-} while (0)
-
-#define LIST_INSERT_AFTER(listelm, elm, field) do { \
- QMD_LIST_CHECK_NEXT(listelm, field); \
- if ((LIST_NEXT((elm), field) = LIST_NEXT((listelm), field)) != NULL)\
- LIST_NEXT((listelm), field)->field.le_prev = \
- &LIST_NEXT((elm), field); \
- LIST_NEXT((listelm), field) = (elm); \
- (elm)->field.le_prev = &LIST_NEXT((listelm), field); \
-} while (0)
-
-#define LIST_INSERT_BEFORE(listelm, elm, field) do { \
- QMD_LIST_CHECK_PREV(listelm, field); \
- (elm)->field.le_prev = (listelm)->field.le_prev; \
- LIST_NEXT((elm), field) = (listelm); \
- *(listelm)->field.le_prev = (elm); \
- (listelm)->field.le_prev = &LIST_NEXT((elm), field); \
-} while (0)
-
-#define LIST_INSERT_HEAD(head, elm, field) do { \
- QMD_LIST_CHECK_HEAD((head), field); \
- if ((LIST_NEXT((elm), field) = LIST_FIRST((head))) != NULL) \
- LIST_FIRST((head))->field.le_prev = &LIST_NEXT((elm), field);\
- LIST_FIRST((head)) = (elm); \
- (elm)->field.le_prev = &LIST_FIRST((head)); \
-} while (0)
-
-#define LIST_NEXT(elm, field) ((elm)->field.le_next)
-
-#define LIST_REMOVE(elm, field) do { \
- QMD_LIST_CHECK_NEXT(elm, field); \
- QMD_LIST_CHECK_PREV(elm, field); \
- if (LIST_NEXT((elm), field) != NULL) \
- LIST_NEXT((elm), field)->field.le_prev = \
- (elm)->field.le_prev; \
- *(elm)->field.le_prev = LIST_NEXT((elm), field); \
- TRASHIT((elm)->field.le_next); \
- TRASHIT((elm)->field.le_prev); \
-} while (0)
-
-/*
- * Tail queue declarations.
- */
-#define TAILQ_HEAD(name, type) \
-struct name { \
- struct type *tqh_first; /* first element */ \
- struct type **tqh_last; /* addr of last next element */ \
- TRACEBUF \
-}
-
-#define TAILQ_HEAD_INITIALIZER(head) \
- { NULL, &(head).tqh_first }
-
-#define TAILQ_ENTRY(type) \
-struct { \
- struct type *tqe_next; /* next element */ \
- struct type **tqe_prev; /* address of previous next element */ \
- TRACEBUF \
-}
-
-/*
- * Tail queue functions.
- */
-#define TAILQ_CONCAT(head1, head2, field) do { \
- if (!TAILQ_EMPTY(head2)) { \
- *(head1)->tqh_last = (head2)->tqh_first; \
- (head2)->tqh_first->field.tqe_prev = (head1)->tqh_last; \
- (head1)->tqh_last = (head2)->tqh_last; \
- TAILQ_INIT((head2)); \
- QMD_TRACE_HEAD(head1); \
- QMD_TRACE_HEAD(head2); \
- } \
-} while (0)
-
-#define TAILQ_EMPTY(head) ((head)->tqh_first == NULL)
-
-#define TAILQ_FIRST(head) ((head)->tqh_first)
-
-#define TAILQ_FOREACH(var, head, field) \
- for ((var) = TAILQ_FIRST((head)); \
- (var); \
- (var) = TAILQ_NEXT((var), field))
-
-#define TAILQ_FOREACH_SAFE(var, head, field, tvar) \
- for ((var) = TAILQ_FIRST((head)); \
- (var) && ((tvar) = TAILQ_NEXT((var), field), 1); \
- (var) = (tvar))
-
-#define TAILQ_FOREACH_REVERSE(var, head, headname, field) \
- for ((var) = TAILQ_LAST((head), headname); \
- (var); \
- (var) = TAILQ_PREV((var), headname, field))
-
-#define TAILQ_FOREACH_REVERSE_SAFE(var, head, headname, field, tvar) \
- for ((var) = TAILQ_LAST((head), headname); \
- (var) && ((tvar) = TAILQ_PREV((var), headname, field), 1); \
- (var) = (tvar))
-
-#define TAILQ_INIT(head) do { \
- TAILQ_FIRST((head)) = NULL; \
- (head)->tqh_last = &TAILQ_FIRST((head)); \
- QMD_TRACE_HEAD(head); \
-} while (0)
-
-#define TAILQ_INSERT_AFTER(head, listelm, elm, field) do { \
- if ((TAILQ_NEXT((elm), field) = TAILQ_NEXT((listelm), field)) != NULL)\
- TAILQ_NEXT((elm), field)->field.tqe_prev = \
- &TAILQ_NEXT((elm), field); \
- else { \
- (head)->tqh_last = &TAILQ_NEXT((elm), field); \
- QMD_TRACE_HEAD(head); \
- } \
- TAILQ_NEXT((listelm), field) = (elm); \
- (elm)->field.tqe_prev = &TAILQ_NEXT((listelm), field); \
- QMD_TRACE_ELEM(&(elm)->field); \
- QMD_TRACE_ELEM(&listelm->field); \
-} while (0)
-
-#define TAILQ_INSERT_BEFORE(listelm, elm, field) do { \
- (elm)->field.tqe_prev = (listelm)->field.tqe_prev; \
- TAILQ_NEXT((elm), field) = (listelm); \
- *(listelm)->field.tqe_prev = (elm); \
- (listelm)->field.tqe_prev = &TAILQ_NEXT((elm), field); \
- QMD_TRACE_ELEM(&(elm)->field); \
- QMD_TRACE_ELEM(&listelm->field); \
-} while (0)
-
-#define TAILQ_INSERT_HEAD(head, elm, field) do { \
- if ((TAILQ_NEXT((elm), field) = TAILQ_FIRST((head))) != NULL) \
- TAILQ_FIRST((head))->field.tqe_prev = \
- &TAILQ_NEXT((elm), field); \
- else \
- (head)->tqh_last = &TAILQ_NEXT((elm), field); \
- TAILQ_FIRST((head)) = (elm); \
- (elm)->field.tqe_prev = &TAILQ_FIRST((head)); \
- QMD_TRACE_HEAD(head); \
- QMD_TRACE_ELEM(&(elm)->field); \
-} while (0)
-
-#define TAILQ_INSERT_TAIL(head, elm, field) do { \
- TAILQ_NEXT((elm), field) = NULL; \
- (elm)->field.tqe_prev = (head)->tqh_last; \
- *(head)->tqh_last = (elm); \
- (head)->tqh_last = &TAILQ_NEXT((elm), field); \
- QMD_TRACE_HEAD(head); \
- QMD_TRACE_ELEM(&(elm)->field); \
-} while (0)
-
-#define TAILQ_LAST(head, headname) \
- (*(((struct headname *)((head)->tqh_last))->tqh_last))
-
-#define TAILQ_NEXT(elm, field) ((elm)->field.tqe_next)
-
-#define TAILQ_PREV(elm, headname, field) \
- (*(((struct headname *)((elm)->field.tqe_prev))->tqh_last))
-
-#define TAILQ_REMOVE(head, elm, field) do { \
- if ((TAILQ_NEXT((elm), field)) != NULL) \
- TAILQ_NEXT((elm), field)->field.tqe_prev = \
- (elm)->field.tqe_prev; \
- else { \
- (head)->tqh_last = (elm)->field.tqe_prev; \
- QMD_TRACE_HEAD(head); \
- } \
- *(elm)->field.tqe_prev = TAILQ_NEXT((elm), field); \
- TRASHIT((elm)->field.tqe_next); \
- TRASHIT((elm)->field.tqe_prev); \
- QMD_TRACE_ELEM(&(elm)->field); \
-} while (0)
-
-#endif /* !_COMPAT_QUEUE_H_ */
Copied: vendor/openbsm/1.2_alpha4/compat/queue.h (from rev 11163, vendor/openbsm/dist/compat/queue.h)
===================================================================
--- vendor/openbsm/1.2_alpha4/compat/queue.h (rev 0)
+++ vendor/openbsm/1.2_alpha4/compat/queue.h 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,541 @@
+/*-
+ * Copyright (c) 1991, 1993
+ * The Regents of the University of California. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 4. Neither the name of the University nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * @(#)queue.h 8.5 (Berkeley) 8/20/94
+ *
+ * Derived from FreeBSD src/sys/sys/queue.h:1.63.
+ */
+
+#ifndef _COMPAT_QUEUE_H_
+#define _COMPAT_QUEUE_H_
+
+#include <sys/cdefs.h>
+
+/*
+ * This file defines four types of data structures: singly-linked lists,
+ * singly-linked tail queues, lists and tail queues.
+ *
+ * A singly-linked list is headed by a single forward pointer. The elements
+ * are singly linked for minimum space and pointer manipulation overhead at
+ * the expense of O(n) removal for arbitrary elements. New elements can be
+ * added to the list after an existing element or at the head of the list.
+ * Elements being removed from the head of the list should use the explicit
+ * macro for this purpose for optimum efficiency. A singly-linked list may
+ * only be traversed in the forward direction. Singly-linked lists are ideal
+ * for applications with large datasets and few or no removals or for
+ * implementing a LIFO queue.
+ *
+ * A singly-linked tail queue is headed by a pair of pointers, one to the
+ * head of the list and the other to the tail of the list. The elements are
+ * singly linked for minimum space and pointer manipulation overhead at the
+ * expense of O(n) removal for arbitrary elements. New elements can be added
+ * to the list after an existing element, at the head of the list, or at the
+ * end of the list. Elements being removed from the head of the tail queue
+ * should use the explicit macro for this purpose for optimum efficiency.
+ * A singly-linked tail queue may only be traversed in the forward direction.
+ * Singly-linked tail queues are ideal for applications with large datasets
+ * and few or no removals or for implementing a FIFO queue.
+ *
+ * A list is headed by a single forward pointer (or an array of forward
+ * pointers for a hash table header). The elements are doubly linked
+ * so that an arbitrary element can be removed without a need to
+ * traverse the list. New elements can be added to the list before
+ * or after an existing element or at the head of the list. A list
+ * may only be traversed in the forward direction.
+ *
+ * A tail queue is headed by a pair of pointers, one to the head of the
+ * list and the other to the tail of the list. The elements are doubly
+ * linked so that an arbitrary element can be removed without a need to
+ * traverse the list. New elements can be added to the list before or
+ * after an existing element, at the head of the list, or at the end of
+ * the list. A tail queue may be traversed in either direction.
+ *
+ * For details on the use of these macros, see the queue(3) manual page.
+ *
+ *
+ * SLIST LIST STAILQ TAILQ
+ * _HEAD + + + +
+ * _HEAD_INITIALIZER + + + +
+ * _ENTRY + + + +
+ * _INIT + + + +
+ * _EMPTY + + + +
+ * _FIRST + + + +
+ * _NEXT + + + +
+ * _PREV - - - +
+ * _LAST - - + +
+ * _FOREACH + + + +
+ * _FOREACH_SAFE + + + +
+ * _FOREACH_REVERSE - - - +
+ * _FOREACH_REVERSE_SAFE - - - +
+ * _INSERT_HEAD + + + +
+ * _INSERT_BEFORE - + - +
+ * _INSERT_AFTER + + + +
+ * _INSERT_TAIL - - + +
+ * _CONCAT - - + +
+ * _REMOVE_HEAD + - + -
+ * _REMOVE + + + +
+ *
+ */
+#ifdef QUEUE_MACRO_DEBUG
+/* Store the last 2 places the queue element or head was altered */
+struct qm_trace {
+ char * lastfile;
+ int lastline;
+ char * prevfile;
+ int prevline;
+};
+
+#define TRACEBUF struct qm_trace trace;
+#define TRASHIT(x) do {(x) = (void *)-1;} while (0)
+
+#define QMD_TRACE_HEAD(head) do { \
+ (head)->trace.prevline = (head)->trace.lastline; \
+ (head)->trace.prevfile = (head)->trace.lastfile; \
+ (head)->trace.lastline = __LINE__; \
+ (head)->trace.lastfile = __FILE__; \
+} while (0)
+
+#define QMD_TRACE_ELEM(elem) do { \
+ (elem)->trace.prevline = (elem)->trace.lastline; \
+ (elem)->trace.prevfile = (elem)->trace.lastfile; \
+ (elem)->trace.lastline = __LINE__; \
+ (elem)->trace.lastfile = __FILE__; \
+} while (0)
+
+#else
+#define QMD_TRACE_ELEM(elem)
+#define QMD_TRACE_HEAD(head)
+#define TRACEBUF
+#define TRASHIT(x)
+#endif /* QUEUE_MACRO_DEBUG */
+
+/*
+ * Singly-linked List declarations.
+ */
+#define SLIST_HEAD(name, type) \
+struct name { \
+ struct type *slh_first; /* first element */ \
+}
+
+#define SLIST_HEAD_INITIALIZER(head) \
+ { NULL }
+
+#define SLIST_ENTRY(type) \
+struct { \
+ struct type *sle_next; /* next element */ \
+}
+
+/*
+ * Singly-linked List functions.
+ */
+#define SLIST_EMPTY(head) ((head)->slh_first == NULL)
+
+#define SLIST_FIRST(head) ((head)->slh_first)
+
+#define SLIST_FOREACH(var, head, field) \
+ for ((var) = SLIST_FIRST((head)); \
+ (var); \
+ (var) = SLIST_NEXT((var), field))
+
+#define SLIST_FOREACH_SAFE(var, head, field, tvar) \
+ for ((var) = SLIST_FIRST((head)); \
+ (var) && ((tvar) = SLIST_NEXT((var), field), 1); \
+ (var) = (tvar))
+
+#define SLIST_FOREACH_PREVPTR(var, varp, head, field) \
+ for ((varp) = &SLIST_FIRST((head)); \
+ ((var) = *(varp)) != NULL; \
+ (varp) = &SLIST_NEXT((var), field))
+
+#define SLIST_INIT(head) do { \
+ SLIST_FIRST((head)) = NULL; \
+} while (0)
+
+#define SLIST_INSERT_AFTER(slistelm, elm, field) do { \
+ SLIST_NEXT((elm), field) = SLIST_NEXT((slistelm), field); \
+ SLIST_NEXT((slistelm), field) = (elm); \
+} while (0)
+
+#define SLIST_INSERT_HEAD(head, elm, field) do { \
+ SLIST_NEXT((elm), field) = SLIST_FIRST((head)); \
+ SLIST_FIRST((head)) = (elm); \
+} while (0)
+
+#define SLIST_NEXT(elm, field) ((elm)->field.sle_next)
+
+#define SLIST_REMOVE(head, elm, type, field) do { \
+ if (SLIST_FIRST((head)) == (elm)) { \
+ SLIST_REMOVE_HEAD((head), field); \
+ } \
+ else { \
+ struct type *curelm = SLIST_FIRST((head)); \
+ while (SLIST_NEXT(curelm, field) != (elm)) \
+ curelm = SLIST_NEXT(curelm, field); \
+ SLIST_NEXT(curelm, field) = \
+ SLIST_NEXT(SLIST_NEXT(curelm, field), field); \
+ } \
+ TRASHIT((elm)->field.sle_next); \
+} while (0)
+
+#define SLIST_REMOVE_HEAD(head, field) do { \
+ SLIST_FIRST((head)) = SLIST_NEXT(SLIST_FIRST((head)), field); \
+} while (0)
+
+/*
+ * Singly-linked Tail queue declarations.
+ */
+#define STAILQ_HEAD(name, type) \
+struct name { \
+ struct type *stqh_first;/* first element */ \
+ struct type **stqh_last;/* addr of last next element */ \
+}
+
+#define STAILQ_HEAD_INITIALIZER(head) \
+ { NULL, &(head).stqh_first }
+
+#define STAILQ_ENTRY(type) \
+struct { \
+ struct type *stqe_next; /* next element */ \
+}
+
+/*
+ * Singly-linked Tail queue functions.
+ */
+#define STAILQ_CONCAT(head1, head2) do { \
+ if (!STAILQ_EMPTY((head2))) { \
+ *(head1)->stqh_last = (head2)->stqh_first; \
+ (head1)->stqh_last = (head2)->stqh_last; \
+ STAILQ_INIT((head2)); \
+ } \
+} while (0)
+
+#define STAILQ_EMPTY(head) ((head)->stqh_first == NULL)
+
+#define STAILQ_FIRST(head) ((head)->stqh_first)
+
+#define STAILQ_FOREACH(var, head, field) \
+ for((var) = STAILQ_FIRST((head)); \
+ (var); \
+ (var) = STAILQ_NEXT((var), field))
+
+
+#define STAILQ_FOREACH_SAFE(var, head, field, tvar) \
+ for ((var) = STAILQ_FIRST((head)); \
+ (var) && ((tvar) = STAILQ_NEXT((var), field), 1); \
+ (var) = (tvar))
+
+#define STAILQ_INIT(head) do { \
+ STAILQ_FIRST((head)) = NULL; \
+ (head)->stqh_last = &STAILQ_FIRST((head)); \
+} while (0)
+
+#define STAILQ_INSERT_AFTER(head, tqelm, elm, field) do { \
+ if ((STAILQ_NEXT((elm), field) = STAILQ_NEXT((tqelm), field)) == NULL)\
+ (head)->stqh_last = &STAILQ_NEXT((elm), field); \
+ STAILQ_NEXT((tqelm), field) = (elm); \
+} while (0)
+
+#define STAILQ_INSERT_HEAD(head, elm, field) do { \
+ if ((STAILQ_NEXT((elm), field) = STAILQ_FIRST((head))) == NULL) \
+ (head)->stqh_last = &STAILQ_NEXT((elm), field); \
+ STAILQ_FIRST((head)) = (elm); \
+} while (0)
+
+#define STAILQ_INSERT_TAIL(head, elm, field) do { \
+ STAILQ_NEXT((elm), field) = NULL; \
+ *(head)->stqh_last = (elm); \
+ (head)->stqh_last = &STAILQ_NEXT((elm), field); \
+} while (0)
+
+#define STAILQ_LAST(head, type, field) \
+ (STAILQ_EMPTY((head)) ? \
+ NULL : \
+ ((struct type *) \
+ ((char *)((head)->stqh_last) - __offsetof(struct type, field))))
+
+#define STAILQ_NEXT(elm, field) ((elm)->field.stqe_next)
+
+#define STAILQ_REMOVE(head, elm, type, field) do { \
+ if (STAILQ_FIRST((head)) == (elm)) { \
+ STAILQ_REMOVE_HEAD((head), field); \
+ } \
+ else { \
+ struct type *curelm = STAILQ_FIRST((head)); \
+ while (STAILQ_NEXT(curelm, field) != (elm)) \
+ curelm = STAILQ_NEXT(curelm, field); \
+ if ((STAILQ_NEXT(curelm, field) = \
+ STAILQ_NEXT(STAILQ_NEXT(curelm, field), field)) == NULL)\
+ (head)->stqh_last = &STAILQ_NEXT((curelm), field);\
+ } \
+ TRASHIT((elm)->field.stqe_next); \
+} while (0)
+
+#define STAILQ_REMOVE_HEAD(head, field) do { \
+ if ((STAILQ_FIRST((head)) = \
+ STAILQ_NEXT(STAILQ_FIRST((head)), field)) == NULL) \
+ (head)->stqh_last = &STAILQ_FIRST((head)); \
+} while (0)
+
+#define STAILQ_REMOVE_HEAD_UNTIL(head, elm, field) do { \
+ if ((STAILQ_FIRST((head)) = STAILQ_NEXT((elm), field)) == NULL) \
+ (head)->stqh_last = &STAILQ_FIRST((head)); \
+} while (0)
+
+/*
+ * List declarations.
+ */
+#define LIST_HEAD(name, type) \
+struct name { \
+ struct type *lh_first; /* first element */ \
+}
+
+#define LIST_HEAD_INITIALIZER(head) \
+ { NULL }
+
+#define LIST_ENTRY(type) \
+struct { \
+ struct type *le_next; /* next element */ \
+ struct type **le_prev; /* address of previous next element */ \
+}
+
+/*
+ * List functions.
+ */
+
+#if (defined(_KERNEL) && defined(INVARIANTS)) || defined(QUEUE_MACRO_DEBUG)
+#define QMD_LIST_CHECK_HEAD(head, field) do { \
+ if (LIST_FIRST((head)) != NULL && \
+ LIST_FIRST((head))->field.le_prev != \
+ &LIST_FIRST((head))) \
+ panic("Bad list head %p first->prev != head", (head)); \
+} while (0)
+
+#define QMD_LIST_CHECK_NEXT(elm, field) do { \
+ if (LIST_NEXT((elm), field) != NULL && \
+ LIST_NEXT((elm), field)->field.le_prev != \
+ &((elm)->field.le_next)) \
+ panic("Bad link elm %p next->prev != elm", (elm)); \
+} while (0)
+
+#define QMD_LIST_CHECK_PREV(elm, field) do { \
+ if (*(elm)->field.le_prev != (elm)) \
+ panic("Bad link elm %p prev->next != elm", (elm)); \
+} while (0)
+#else
+#define QMD_LIST_CHECK_HEAD(head, field)
+#define QMD_LIST_CHECK_NEXT(elm, field)
+#define QMD_LIST_CHECK_PREV(elm, field)
+#endif /* (_KERNEL && INVARIANTS) || QUEUE_MACRO_DEBUG */
+
+#define LIST_EMPTY(head) ((head)->lh_first == NULL)
+
+#define LIST_FIRST(head) ((head)->lh_first)
+
+#define LIST_FOREACH(var, head, field) \
+ for ((var) = LIST_FIRST((head)); \
+ (var); \
+ (var) = LIST_NEXT((var), field))
+
+#define LIST_FOREACH_SAFE(var, head, field, tvar) \
+ for ((var) = LIST_FIRST((head)); \
+ (var) && ((tvar) = LIST_NEXT((var), field), 1); \
+ (var) = (tvar))
+
+#define LIST_INIT(head) do { \
+ LIST_FIRST((head)) = NULL; \
+} while (0)
+
+#define LIST_INSERT_AFTER(listelm, elm, field) do { \
+ QMD_LIST_CHECK_NEXT(listelm, field); \
+ if ((LIST_NEXT((elm), field) = LIST_NEXT((listelm), field)) != NULL)\
+ LIST_NEXT((listelm), field)->field.le_prev = \
+ &LIST_NEXT((elm), field); \
+ LIST_NEXT((listelm), field) = (elm); \
+ (elm)->field.le_prev = &LIST_NEXT((listelm), field); \
+} while (0)
+
+#define LIST_INSERT_BEFORE(listelm, elm, field) do { \
+ QMD_LIST_CHECK_PREV(listelm, field); \
+ (elm)->field.le_prev = (listelm)->field.le_prev; \
+ LIST_NEXT((elm), field) = (listelm); \
+ *(listelm)->field.le_prev = (elm); \
+ (listelm)->field.le_prev = &LIST_NEXT((elm), field); \
+} while (0)
+
+#define LIST_INSERT_HEAD(head, elm, field) do { \
+ QMD_LIST_CHECK_HEAD((head), field); \
+ if ((LIST_NEXT((elm), field) = LIST_FIRST((head))) != NULL) \
+ LIST_FIRST((head))->field.le_prev = &LIST_NEXT((elm), field);\
+ LIST_FIRST((head)) = (elm); \
+ (elm)->field.le_prev = &LIST_FIRST((head)); \
+} while (0)
+
+#define LIST_NEXT(elm, field) ((elm)->field.le_next)
+
+#define LIST_REMOVE(elm, field) do { \
+ QMD_LIST_CHECK_NEXT(elm, field); \
+ QMD_LIST_CHECK_PREV(elm, field); \
+ if (LIST_NEXT((elm), field) != NULL) \
+ LIST_NEXT((elm), field)->field.le_prev = \
+ (elm)->field.le_prev; \
+ *(elm)->field.le_prev = LIST_NEXT((elm), field); \
+ TRASHIT((elm)->field.le_next); \
+ TRASHIT((elm)->field.le_prev); \
+} while (0)
+
+/*
+ * Tail queue declarations.
+ */
+#define TAILQ_HEAD(name, type) \
+struct name { \
+ struct type *tqh_first; /* first element */ \
+ struct type **tqh_last; /* addr of last next element */ \
+ TRACEBUF \
+}
+
+#define TAILQ_HEAD_INITIALIZER(head) \
+ { NULL, &(head).tqh_first }
+
+#define TAILQ_ENTRY(type) \
+struct { \
+ struct type *tqe_next; /* next element */ \
+ struct type **tqe_prev; /* address of previous next element */ \
+ TRACEBUF \
+}
+
+/*
+ * Tail queue functions.
+ */
+#define TAILQ_CONCAT(head1, head2, field) do { \
+ if (!TAILQ_EMPTY(head2)) { \
+ *(head1)->tqh_last = (head2)->tqh_first; \
+ (head2)->tqh_first->field.tqe_prev = (head1)->tqh_last; \
+ (head1)->tqh_last = (head2)->tqh_last; \
+ TAILQ_INIT((head2)); \
+ QMD_TRACE_HEAD(head1); \
+ QMD_TRACE_HEAD(head2); \
+ } \
+} while (0)
+
+#define TAILQ_EMPTY(head) ((head)->tqh_first == NULL)
+
+#define TAILQ_FIRST(head) ((head)->tqh_first)
+
+#define TAILQ_FOREACH(var, head, field) \
+ for ((var) = TAILQ_FIRST((head)); \
+ (var); \
+ (var) = TAILQ_NEXT((var), field))
+
+#define TAILQ_FOREACH_SAFE(var, head, field, tvar) \
+ for ((var) = TAILQ_FIRST((head)); \
+ (var) && ((tvar) = TAILQ_NEXT((var), field), 1); \
+ (var) = (tvar))
+
+#define TAILQ_FOREACH_REVERSE(var, head, headname, field) \
+ for ((var) = TAILQ_LAST((head), headname); \
+ (var); \
+ (var) = TAILQ_PREV((var), headname, field))
+
+#define TAILQ_FOREACH_REVERSE_SAFE(var, head, headname, field, tvar) \
+ for ((var) = TAILQ_LAST((head), headname); \
+ (var) && ((tvar) = TAILQ_PREV((var), headname, field), 1); \
+ (var) = (tvar))
+
+#define TAILQ_INIT(head) do { \
+ TAILQ_FIRST((head)) = NULL; \
+ (head)->tqh_last = &TAILQ_FIRST((head)); \
+ QMD_TRACE_HEAD(head); \
+} while (0)
+
+#define TAILQ_INSERT_AFTER(head, listelm, elm, field) do { \
+ if ((TAILQ_NEXT((elm), field) = TAILQ_NEXT((listelm), field)) != NULL)\
+ TAILQ_NEXT((elm), field)->field.tqe_prev = \
+ &TAILQ_NEXT((elm), field); \
+ else { \
+ (head)->tqh_last = &TAILQ_NEXT((elm), field); \
+ QMD_TRACE_HEAD(head); \
+ } \
+ TAILQ_NEXT((listelm), field) = (elm); \
+ (elm)->field.tqe_prev = &TAILQ_NEXT((listelm), field); \
+ QMD_TRACE_ELEM(&(elm)->field); \
+ QMD_TRACE_ELEM(&listelm->field); \
+} while (0)
+
+#define TAILQ_INSERT_BEFORE(listelm, elm, field) do { \
+ (elm)->field.tqe_prev = (listelm)->field.tqe_prev; \
+ TAILQ_NEXT((elm), field) = (listelm); \
+ *(listelm)->field.tqe_prev = (elm); \
+ (listelm)->field.tqe_prev = &TAILQ_NEXT((elm), field); \
+ QMD_TRACE_ELEM(&(elm)->field); \
+ QMD_TRACE_ELEM(&listelm->field); \
+} while (0)
+
+#define TAILQ_INSERT_HEAD(head, elm, field) do { \
+ if ((TAILQ_NEXT((elm), field) = TAILQ_FIRST((head))) != NULL) \
+ TAILQ_FIRST((head))->field.tqe_prev = \
+ &TAILQ_NEXT((elm), field); \
+ else \
+ (head)->tqh_last = &TAILQ_NEXT((elm), field); \
+ TAILQ_FIRST((head)) = (elm); \
+ (elm)->field.tqe_prev = &TAILQ_FIRST((head)); \
+ QMD_TRACE_HEAD(head); \
+ QMD_TRACE_ELEM(&(elm)->field); \
+} while (0)
+
+#define TAILQ_INSERT_TAIL(head, elm, field) do { \
+ TAILQ_NEXT((elm), field) = NULL; \
+ (elm)->field.tqe_prev = (head)->tqh_last; \
+ *(head)->tqh_last = (elm); \
+ (head)->tqh_last = &TAILQ_NEXT((elm), field); \
+ QMD_TRACE_HEAD(head); \
+ QMD_TRACE_ELEM(&(elm)->field); \
+} while (0)
+
+#define TAILQ_LAST(head, headname) \
+ (*(((struct headname *)((head)->tqh_last))->tqh_last))
+
+#define TAILQ_NEXT(elm, field) ((elm)->field.tqe_next)
+
+#define TAILQ_PREV(elm, headname, field) \
+ (*(((struct headname *)((elm)->field.tqe_prev))->tqh_last))
+
+#define TAILQ_REMOVE(head, elm, field) do { \
+ if ((TAILQ_NEXT((elm), field)) != NULL) \
+ TAILQ_NEXT((elm), field)->field.tqe_prev = \
+ (elm)->field.tqe_prev; \
+ else { \
+ (head)->tqh_last = (elm)->field.tqe_prev; \
+ QMD_TRACE_HEAD(head); \
+ } \
+ *(elm)->field.tqe_prev = TAILQ_NEXT((elm), field); \
+ TRASHIT((elm)->field.tqe_next); \
+ TRASHIT((elm)->field.tqe_prev); \
+ QMD_TRACE_ELEM(&(elm)->field); \
+} while (0)
+
+#endif /* !_COMPAT_QUEUE_H_ */
Deleted: vendor/openbsm/1.2_alpha4/compat/strlcat.h
===================================================================
--- vendor/openbsm/dist/compat/strlcat.h 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/compat/strlcat.h 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,66 +0,0 @@
-/*
- * Copyright (c) 1998 Todd C. Miller <Todd.Miller at courtesan.com>
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. The name of the author may not be used to endorse or promote products
- * derived from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
- * THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
- * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
- * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
- * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
- * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
- * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * dollar OpenBSD: strlcat.c,v 1.2 1999/06/17 16:28:58 millert Exp dollar
- */
-
-/*
- * Appends src to string dst of size siz (unlike strncat, siz is the
- * full size of dst, not space left). At most siz-1 characters
- * will be copied. Always NUL terminates (unless siz <= strlen(dst)).
- * Returns strlen(src) + MIN(siz, strlen(initial dst)).
- * If retval >= siz, truncation occurred.
- */
-static size_t
-strlcat(dst, src, siz)
- char *dst;
- const char *src;
- size_t siz;
-{
- char *d = dst;
- const char *s = src;
- size_t n = siz;
- size_t dlen;
-
- /* Find the end of dst and adjust bytes left but don't go past end */
- while (n-- != 0 && *d != '\0')
- d++;
- dlen = d - dst;
- n = siz - dlen;
-
- if (n == 0)
- return(dlen + strlen(s));
- while (*s != '\0') {
- if (n != 1) {
- *d++ = *s;
- n--;
- }
- s++;
- }
- *d = '\0';
-
- return(dlen + (s - src)); /* count does not include NUL */
-}
Copied: vendor/openbsm/1.2_alpha4/compat/strlcat.h (from rev 11163, vendor/openbsm/dist/compat/strlcat.h)
===================================================================
--- vendor/openbsm/1.2_alpha4/compat/strlcat.h (rev 0)
+++ vendor/openbsm/1.2_alpha4/compat/strlcat.h 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,66 @@
+/*-
+ * Copyright (c) 1998 Todd C. Miller <Todd.Miller at courtesan.com>
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
+ * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
+ * THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+ * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+ * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * dollar OpenBSD: strlcat.c,v 1.2 1999/06/17 16:28:58 millert Exp dollar
+ */
+
+/*
+ * Appends src to string dst of size siz (unlike strncat, siz is the
+ * full size of dst, not space left). At most siz-1 characters
+ * will be copied. Always NUL terminates (unless siz <= strlen(dst)).
+ * Returns strlen(src) + MIN(siz, strlen(initial dst)).
+ * If retval >= siz, truncation occurred.
+ */
+static size_t
+strlcat(dst, src, siz)
+ char *dst;
+ const char *src;
+ size_t siz;
+{
+ char *d = dst;
+ const char *s = src;
+ size_t n = siz;
+ size_t dlen;
+
+ /* Find the end of dst and adjust bytes left but don't go past end */
+ while (n-- != 0 && *d != '\0')
+ d++;
+ dlen = d - dst;
+ n = siz - dlen;
+
+ if (n == 0)
+ return(dlen + strlen(s));
+ while (*s != '\0') {
+ if (n != 1) {
+ *d++ = *s;
+ n--;
+ }
+ s++;
+ }
+ *d = '\0';
+
+ return(dlen + (s - src)); /* count does not include NUL */
+}
Copied: vendor/openbsm/1.2_alpha4/compat/strlcpy.h (from rev 11163, vendor/openbsm/dist/compat/strlcpy.h)
===================================================================
--- vendor/openbsm/1.2_alpha4/compat/strlcpy.h (rev 0)
+++ vendor/openbsm/1.2_alpha4/compat/strlcpy.h 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,62 @@
+/*
+ * Copyright (c) 1998 Todd C. Miller <Todd.Miller at courtesan.com>
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
+ * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
+ * THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+ * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+ * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * dollar OpenBSD: strlcpy.c,v 1.4 1999/05/01 18:56:41 millert Exp dollar
+ */
+
+/*
+ * Copy src to string dst of size siz. At most siz-1 characters
+ * will be copied. Always NUL terminates (unless siz == 0).
+ * Returns strlen(src); if retval >= siz, truncation occurred.
+ */
+static size_t
+strlcpy(dst, src, siz)
+ char *dst;
+ const char *src;
+ size_t siz;
+{
+ char *d = dst;
+ const char *s = src;
+ size_t n = siz;
+
+ /* Copy as many bytes as will fit */
+ if (n != 0 && --n != 0) {
+ do {
+ if ((*d++ = *s++) == 0)
+ break;
+ } while (--n != 0);
+ }
+
+ /* Not enough room in dst, add NUL and traverse rest of src */
+ if (n == 0) {
+ if (siz != 0)
+ *d = '\0'; /* NUL-terminate dst */
+ while (*s++)
+ ;
+ }
+
+ return(s - src - 1); /* count does not include NUL */
+}
Copied: vendor/openbsm/1.2_alpha4/compat/vis.h (from rev 11163, vendor/openbsm/dist/compat/vis.h)
===================================================================
--- vendor/openbsm/1.2_alpha4/compat/vis.h (rev 0)
+++ vendor/openbsm/1.2_alpha4/compat/vis.h 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,188 @@
+/*-
+ * Copyright (c) 1989, 1993
+ * The Regents of the University of California. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 4. Neither the name of the University nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * Defived from FreeBSD head/lib/libc/gen/vis.c 165903, head/include/vis.h
+ * 203964.
+ */
+
+#include <sys/types.h>
+#include <limits.h>
+#include <ctype.h>
+#include <stdio.h>
+
+/*
+ * to select alternate encoding format
+ */
+#define VIS_OCTAL 0x01 /* use octal \ddd format */
+#define VIS_CSTYLE 0x02 /* use \[nrft0..] where appropriate */
+
+/*
+ * to alter set of characters encoded (default is to encode all
+ * non-graphic except space, tab, and newline).
+ */
+#define VIS_SP 0x04 /* also encode space */
+#define VIS_TAB 0x08 /* also encode tab */
+#define VIS_NL 0x10 /* also encode newline */
+#define VIS_WHITE (VIS_SP | VIS_TAB | VIS_NL)
+#define VIS_SAFE 0x20 /* only encode "unsafe" characters */
+
+/*
+ * other
+ */
+#define VIS_NOSLASH 0x40 /* inhibit printing '\' */
+#define VIS_HTTPSTYLE 0x80 /* http-style escape % HEX HEX */
+#define VIS_GLOB 0x100 /* encode glob(3) magics */
+
+/*
+ * unvis return codes
+ */
+#define UNVIS_VALID 1 /* character valid */
+#define UNVIS_VALIDPUSH 2 /* character valid, push back passed char */
+#define UNVIS_NOCHAR 3 /* valid sequence, no character produced */
+#define UNVIS_SYNBAD -1 /* unrecognized escape sequence */
+#define UNVIS_ERROR -2 /* decoder in unknown state (unrecoverable) */
+
+/*
+ * unvis flags
+ */
+#define UNVIS_END 1 /* no more characters */
+
+#define isoctal(c) (((u_char)(c)) >= '0' && ((u_char)(c)) <= '7')
+
+/*
+ * vis - visually encode characters
+ */
+char *
+vis(dst, c, flag, nextc)
+ char *dst;
+ int c, nextc;
+ int flag;
+{
+ c = (unsigned char)c;
+
+ if (flag & VIS_HTTPSTYLE) {
+ /* Described in RFC 1808 */
+ if (!(isalnum(c) /* alpha-numeric */
+ /* safe */
+ || c == '$' || c == '-' || c == '_' || c == '.' || c == '+'
+ /* extra */
+ || c == '!' || c == '*' || c == '\'' || c == '('
+ || c == ')' || c == ',')) {
+ *dst++ = '%';
+ snprintf(dst, 4, (c < 16 ? "0%X" : "%X"), c);
+ dst += 2;
+ goto done;
+ }
+ }
+
+ if ((flag & VIS_GLOB) &&
+ (c == '*' || c == '?' || c == '[' || c == '#'))
+ ;
+ else if (isgraph(c) ||
+ ((flag & VIS_SP) == 0 && c == ' ') ||
+ ((flag & VIS_TAB) == 0 && c == '\t') ||
+ ((flag & VIS_NL) == 0 && c == '\n') ||
+ ((flag & VIS_SAFE) && (c == '\b' || c == '\007' || c == '\r'))) {
+ *dst++ = c;
+ if (c == '\\' && (flag & VIS_NOSLASH) == 0)
+ *dst++ = '\\';
+ *dst = '\0';
+ return (dst);
+ }
+
+ if (flag & VIS_CSTYLE) {
+ switch(c) {
+ case '\n':
+ *dst++ = '\\';
+ *dst++ = 'n';
+ goto done;
+ case '\r':
+ *dst++ = '\\';
+ *dst++ = 'r';
+ goto done;
+ case '\b':
+ *dst++ = '\\';
+ *dst++ = 'b';
+ goto done;
+ case '\a':
+ *dst++ = '\\';
+ *dst++ = 'a';
+ goto done;
+ case '\v':
+ *dst++ = '\\';
+ *dst++ = 'v';
+ goto done;
+ case '\t':
+ *dst++ = '\\';
+ *dst++ = 't';
+ goto done;
+ case '\f':
+ *dst++ = '\\';
+ *dst++ = 'f';
+ goto done;
+ case ' ':
+ *dst++ = '\\';
+ *dst++ = 's';
+ goto done;
+ case '\0':
+ *dst++ = '\\';
+ *dst++ = '0';
+ if (isoctal(nextc)) {
+ *dst++ = '0';
+ *dst++ = '0';
+ }
+ goto done;
+ }
+ }
+ if (((c & 0177) == ' ') || isgraph(c) || (flag & VIS_OCTAL)) {
+ *dst++ = '\\';
+ *dst++ = ((u_char)c >> 6 & 07) + '0';
+ *dst++ = ((u_char)c >> 3 & 07) + '0';
+ *dst++ = ((u_char)c & 07) + '0';
+ goto done;
+ }
+ if ((flag & VIS_NOSLASH) == 0)
+ *dst++ = '\\';
+ if (c & 0200) {
+ c &= 0177;
+ *dst++ = 'M';
+ }
+ if (iscntrl(c)) {
+ *dst++ = '^';
+ if (c == 0177)
+ *dst++ = '?';
+ else
+ *dst++ = c + '@';
+ } else {
+ *dst++ = '-';
+ *dst++ = c;
+ }
+done:
+ *dst = '\0';
+ return (dst);
+}
Deleted: vendor/openbsm/1.2_alpha4/config/config.h
===================================================================
--- vendor/openbsm/dist/config/config.h 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/config/config.h 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,195 +0,0 @@
-/* config/config.h. Generated from config.h.in by configure. */
-/* config/config.h.in. Generated from configure.ac by autoheader. */
-/* $FreeBSD: src/contrib/openbsm/config/config.h,v 1.6.2.1 2007/11/04 12:49:59 rwatson Exp $ */
-
-/* Define to 1 if you have the `alarm' function. */
-#define HAVE_ALARM 1
-
-/* Define if audit system calls present */
-#define HAVE_AUDIT_SYSCALLS
-
-/* Define to 1 if you have the `bzero' function. */
-#define HAVE_BZERO 1
-
-/* Define to 1 if your system has a working `chown' function. */
-#define HAVE_CHOWN 1
-
-/* Define to 1 if you have the `clock_gettime' function. */
-#define HAVE_CLOCK_GETTIME 1
-
-/* Define to 1 if you have the <dlfcn.h> header file. */
-#define HAVE_DLFCN_H 1
-
-/* Define to 1 if you have the <endian.h> header file. */
-/* #undef HAVE_ENDIAN_H */
-
-/* Define to 1 if you have the `fork' function. */
-#define HAVE_FORK 1
-
-/* Define to 1 if you have the `ftruncate' function. */
-#define HAVE_FTRUNCATE 1
-
-/* Define if queue.h includes LIST_FIRST */
-#define HAVE_FULL_QUEUE_H
-
-/* Define to 1 if you have the `gettimeofday' function. */
-#define HAVE_GETTIMEOFDAY 1
-
-/* Define to 1 if you have the `inet_ntoa' function. */
-#define HAVE_INET_NTOA 1
-
-/* Define to 1 if you have the <inttypes.h> header file. */
-#define HAVE_INTTYPES_H 1
-
-/* Define if ipc_perm.__key instead of key */
-/* #undef HAVE_IPC_PERM___KEY */
-
-/* Define if ipc_perm.__seq instead of seq */
-/* #undef HAVE_IPC_PERM___SEQ */
-
-/* Define to 1 if you have the <machine/endian.h> header file. */
-#define HAVE_MACHINE_ENDIAN_H 1
-
-/* Define to 1 if you have the <mach/mach.h> header file. */
-/* #undef HAVE_MACH_MACH_H */
-
-/* Define to 1 if your system has a GNU libc compatible `malloc' function, and
- to 0 otherwise. */
-#define HAVE_MALLOC 1
-
-/* Define to 1 if you have the <memory.h> header file. */
-#define HAVE_MEMORY_H 1
-
-/* Define to 1 if you have the `memset' function. */
-#define HAVE_MEMSET 1
-
-/* Define to 1 if `stat' has the bug that it succeeds when given the
- zero-length file name argument. */
-/* #undef HAVE_STAT_EMPTY_STRING_BUG */
-
-/* Define to 1 if you have the <stdint.h> header file. */
-#define HAVE_STDINT_H 1
-
-/* Define to 1 if you have the <stdlib.h> header file. */
-#define HAVE_STDLIB_H 1
-
-/* Define to 1 if you have the `strchr' function. */
-#define HAVE_STRCHR 1
-
-/* Define to 1 if you have the `strerror' function. */
-#define HAVE_STRERROR 1
-
-/* Define to 1 if you have the `strftime' function. */
-#define HAVE_STRFTIME 1
-
-/* Define to 1 if you have the <strings.h> header file. */
-#define HAVE_STRINGS_H 1
-
-/* Define to 1 if you have the <string.h> header file. */
-#define HAVE_STRING_H 1
-
-/* Define to 1 if you have the `strlcat' function. */
-#define HAVE_STRLCAT 1
-
-/* Define to 1 if you have the `strrchr' function. */
-#define HAVE_STRRCHR 1
-
-/* Define to 1 if you have the `strstr' function. */
-#define HAVE_STRSTR 1
-
-/* Define to 1 if you have the `strtol' function. */
-#define HAVE_STRTOL 1
-
-/* Define to 1 if you have the `strtoul' function. */
-#define HAVE_STRTOUL 1
-
-/* Define to 1 if `st_rdev' is member of `struct stat'. */
-#define HAVE_STRUCT_STAT_ST_RDEV 1
-
-/* Define to 1 if you have the <sys/endian.h> header file. */
-#define HAVE_SYS_ENDIAN_H 1
-
-/* Define to 1 if you have the <sys/stat.h> header file. */
-#define HAVE_SYS_STAT_H 1
-
-/* Define to 1 if you have the <sys/time.h> header file. */
-#define HAVE_SYS_TIME_H 1
-
-/* Define to 1 if you have the <sys/types.h> header file. */
-#define HAVE_SYS_TYPES_H 1
-
-/* Define to 1 if you have <sys/wait.h> that is POSIX.1 compatible. */
-#define HAVE_SYS_WAIT_H 1
-
-/* Define to 1 if you have the <unistd.h> header file. */
-#define HAVE_UNISTD_H 1
-
-/* Define to 1 if you have the `vfork' function. */
-#define HAVE_VFORK 1
-
-/* Define to 1 if you have the <vfork.h> header file. */
-/* #undef HAVE_VFORK_H */
-
-/* Define to 1 if `fork' works. */
-#define HAVE_WORKING_FORK 1
-
-/* Define to 1 if `vfork' works. */
-#define HAVE_WORKING_VFORK 1
-
-/* Define to 1 if `lstat' dereferences a symlink specified with a trailing
- slash. */
-/* #undef LSTAT_FOLLOWS_SLASHED_SYMLINK */
-
-/* Name of package */
-#define PACKAGE "OpenBSM"
-
-/* Define to the address where bug reports for this package should be sent. */
-#define PACKAGE_BUGREPORT "trustedbsd-audit at TrustesdBSD.org"
-
-/* Define to the full name of this package. */
-#define PACKAGE_NAME "OpenBSM"
-
-/* Define to the full name and version of this package. */
-#define PACKAGE_STRING "OpenBSM 1.0"
-
-/* Define to the one symbol short name of this package. */
-#define PACKAGE_TARNAME "openbsm"
-
-/* Define to the version of this package. */
-#define PACKAGE_VERSION "1.0"
-
-/* Define as the return type of signal handlers (`int' or `void'). */
-#define RETSIGTYPE void
-
-/* Define to 1 if you have the ANSI C header files. */
-#define STDC_HEADERS 1
-
-/* Define to 1 if you can safely include both <sys/time.h> and <time.h>. */
-#define TIME_WITH_SYS_TIME 1
-
-/* Define to 1 if your <sys/time.h> declares `struct tm'. */
-/* #undef TM_IN_SYS_TIME */
-
-/* Version number of package */
-#define VERSION "1.0"
-
-/* Define to empty if `const' does not conform to ANSI C. */
-/* #undef const */
-
-/* Define to `int' if <sys/types.h> doesn't define. */
-/* #undef gid_t */
-
-/* Define to rpl_malloc if the replacement function should be used. */
-/* #undef malloc */
-
-/* Define to `int' if <sys/types.h> does not define. */
-/* #undef pid_t */
-
-/* Define to `unsigned int' if <sys/types.h> does not define. */
-/* #undef size_t */
-
-/* Define to `int' if <sys/types.h> doesn't define. */
-/* #undef uid_t */
-
-/* Define as `fork' if `vfork' does not work. */
-/* #undef vfork */
Copied: vendor/openbsm/1.2_alpha4/config/config.h (from rev 11163, vendor/openbsm/dist/config/config.h)
===================================================================
--- vendor/openbsm/1.2_alpha4/config/config.h (rev 0)
+++ vendor/openbsm/1.2_alpha4/config/config.h 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,311 @@
+/* config/config.h. Generated from config.h.in by configure. */
+/* config/config.h.in. Generated from configure.ac by autoheader. */
+
+/* Define to 1 if you have the `alarm' function. */
+#define HAVE_ALARM 1
+
+/* Define to 1 if you have the `arc4random' function. */
+#define HAVE_ARC4RANDOM 1
+
+/* Define to 1 if you have the `arc4random_buf' function. */
+#define HAVE_ARC4RANDOM_BUF 1
+
+/* Define if audit system calls present */
+#define HAVE_AUDIT_SYSCALLS /**/
+
+/* Define to 1 if you have the `bzero' function. */
+#define HAVE_BZERO 1
+
+/* Define to 1 if you have the `cap_enter' function. */
+#define HAVE_CAP_ENTER 1
+
+/* Define to 1 if your system has a working `chown' function. */
+#define HAVE_CHOWN 1
+
+/* Define to 1 if you have the `clock_gettime' function. */
+#define HAVE_CLOCK_GETTIME 1
+
+/* Define to 1 if you have the `closefrom' function. */
+#define HAVE_CLOSEFROM 1
+
+/* Define to 1 if you have the <dlfcn.h> header file. */
+#define HAVE_DLFCN_H 1
+
+/* Define to 1 if you have the <endian.h> header file. */
+/* #undef HAVE_ENDIAN_H */
+
+/* Define to 1 if you have the `faccessat' function. */
+#define HAVE_FACCESSAT 1
+
+/* Define to 1 if you have the `fdopendir' function. */
+#define HAVE_FDOPENDIR 1
+
+/* Define to 1 if you have the `fork' function. */
+#define HAVE_FORK 1
+
+/* Define to 1 if you have the `fstatat' function. */
+#define HAVE_FSTATAT 1
+
+/* Define to 1 if you have the `ftruncate' function. */
+#define HAVE_FTRUNCATE 1
+
+/* Define if queue.h includes LIST_FIRST */
+#define HAVE_FULL_QUEUE_H /**/
+
+/* Define to 1 if you have the `getresgid' function. */
+#define HAVE_GETRESGID 1
+
+/* Define to 1 if you have the `getresuid' function. */
+#define HAVE_GETRESUID 1
+
+/* Define to 1 if you have the `gettimeofday' function. */
+#define HAVE_GETTIMEOFDAY 1
+
+/* Define to 1 if you have the `inet_ntoa' function. */
+#define HAVE_INET_NTOA 1
+
+/* Define to 1 if you have the <inttypes.h> header file. */
+#define HAVE_INTTYPES_H 1
+
+/* Define if ipc_perm._key instead of key */
+/* #undef HAVE_IPC_PERM__KEY */
+
+/* Define if ipc_perm._seq instead of seq */
+/* #undef HAVE_IPC_PERM__SEQ */
+
+/* Define if ipc_perm.__key instead of key */
+/* #undef HAVE_IPC_PERM___KEY */
+
+/* Define if ipc_perm.__seq instead of seq */
+/* #undef HAVE_IPC_PERM___SEQ */
+
+/* Define to 1 if you have the `jail' function. */
+#define HAVE_JAIL 1
+
+/* Define to 1 if you have the `kqueue' function. */
+#define HAVE_KQUEUE 1
+
+/* Define to 1 if you have the <machine/endian.h> header file. */
+#define HAVE_MACHINE_ENDIAN_H 1
+
+/* Define to 1 if you have the <mach/mach.h> header file. */
+/* #undef HAVE_MACH_MACH_H */
+
+/* Define to 1 if your system has a GNU libc compatible `malloc' function, and
+ to 0 otherwise. */
+#define HAVE_MALLOC 1
+
+/* Define to 1 if you have the <memory.h> header file. */
+#define HAVE_MEMORY_H 1
+
+/* Define to 1 if you have the `memset' function. */
+#define HAVE_MEMSET 1
+
+/* Define to 1 if you have the `openat' function. */
+#define HAVE_OPENAT 1
+
+/* Define to 1 if you have the <printf.h> header file. */
+#define HAVE_PRINTF_H 1
+
+/* Define to 1 if you have the `pthread_condattr_setclock' function. */
+#define HAVE_PTHREAD_CONDATTR_SETCLOCK 1
+
+/* Define to 1 if you have the `pthread_cond_timedwait_relative_np' function.
+ */
+/* #undef HAVE_PTHREAD_COND_TIMEDWAIT_RELATIVE_NP */
+
+/* Define to 1 if you have the `pthread_mutex_lock' function. */
+#define HAVE_PTHREAD_MUTEX_LOCK 1
+
+/* Define to 1 if you have the <pthread_np.h> header file. */
+#define HAVE_PTHREAD_NP_H 1
+
+/* Define to 1 if you have the `renameat' function. */
+#define HAVE_RENAMEAT 1
+
+/* Define to 1 if you have the `setproctitle' function. */
+#define HAVE_SETPROCTITLE 1
+
+/* Define to 1 if you have the `sigtimedwait' function. */
+#define HAVE_SIGTIMEDWAIT 1
+
+/* Define if sockaddr_storage.ss_len field exists */
+#define HAVE_SOCKADDR_STORAGE_SS_LEN /**/
+
+/* Define to 1 if `stat' has the bug that it succeeds when given the
+ zero-length file name argument. */
+/* #undef HAVE_STAT_EMPTY_STRING_BUG */
+
+/* Define to 1 if you have the <stdint.h> header file. */
+#define HAVE_STDINT_H 1
+
+/* Define to 1 if you have the <stdlib.h> header file. */
+#define HAVE_STDLIB_H 1
+
+/* Define to 1 if you have the `strchr' function. */
+#define HAVE_STRCHR 1
+
+/* Define to 1 if you have the `strerror' function. */
+#define HAVE_STRERROR 1
+
+/* Define to 1 if you have the `strftime' function. */
+#define HAVE_STRFTIME 1
+
+/* Define to 1 if you have the <strings.h> header file. */
+#define HAVE_STRINGS_H 1
+
+/* Define to 1 if you have the <string.h> header file. */
+#define HAVE_STRING_H 1
+
+/* Define to 1 if you have the `strlcat' function. */
+#define HAVE_STRLCAT 1
+
+/* Define to 1 if you have the `strlcpy' function. */
+#define HAVE_STRLCPY 1
+
+/* Define to 1 if you have the `strndup' function. */
+#define HAVE_STRNDUP 1
+
+/* Define to 1 if you have the `strrchr' function. */
+#define HAVE_STRRCHR 1
+
+/* Define to 1 if you have the `strstr' function. */
+#define HAVE_STRSTR 1
+
+/* Define to 1 if you have the `strtol' function. */
+#define HAVE_STRTOL 1
+
+/* Define to 1 if you have the `strtoul' function. */
+#define HAVE_STRTOUL 1
+
+/* Define to 1 if `st_rdev' is a member of `struct stat'. */
+#define HAVE_STRUCT_STAT_ST_RDEV 1
+
+/* Define to 1 if you have the <sys/endian.h> header file. */
+#define HAVE_SYS_ENDIAN_H 1
+
+/* Define to 1 if you have the <sys/stat.h> header file. */
+#define HAVE_SYS_STAT_H 1
+
+/* Define to 1 if you have the <sys/time.h> header file. */
+#define HAVE_SYS_TIME_H 1
+
+/* Define to 1 if you have the <sys/types.h> header file. */
+#define HAVE_SYS_TYPES_H 1
+
+/* Define to 1 if you have <sys/wait.h> that is POSIX.1 compatible. */
+#define HAVE_SYS_WAIT_H 1
+
+/* Define to 1 if you have the <unistd.h> header file. */
+#define HAVE_UNISTD_H 1
+
+/* Define to 1 if you have the `unlinkat' function. */
+#define HAVE_UNLINKAT 1
+
+/* Define to 1 if you have the `vfork' function. */
+#define HAVE_VFORK 1
+
+/* Define to 1 if you have the <vfork.h> header file. */
+/* #undef HAVE_VFORK_H */
+
+/* Define to 1 if you have the `vis' function. */
+#define HAVE_VIS 1
+
+/* Define to 1 if `fork' works. */
+#define HAVE_WORKING_FORK 1
+
+/* Define to 1 if `vfork' works. */
+#define HAVE_WORKING_VFORK 1
+
+/* Define to 1 if `lstat' dereferences a symlink specified with a trailing
+ slash. */
+#define LSTAT_FOLLOWS_SLASHED_SYMLINK 1
+
+/* Define to the sub-directory in which libtool stores uninstalled libraries.
+ */
+#define LT_OBJDIR ".libs/"
+
+/* Name of package */
+#define PACKAGE "OpenBSM"
+
+/* Define to the address where bug reports for this package should be sent. */
+#define PACKAGE_BUGREPORT "trustedbsd-audit at TrustedBSD.org"
+
+/* Define to the full name of this package. */
+#define PACKAGE_NAME "OpenBSM"
+
+/* Define to the full name and version of this package. */
+#define PACKAGE_STRING "OpenBSM 1.2-alpha4"
+
+/* Define to the one symbol short name of this package. */
+#define PACKAGE_TARNAME "openbsm"
+
+/* Define to the home page for this package. */
+#define PACKAGE_URL ""
+
+/* Define to the version of this package. */
+#define PACKAGE_VERSION "1.2-alpha4"
+
+/* Define as the return type of signal handlers (`int' or `void'). */
+#define RETSIGTYPE void
+
+/* Define to 1 if you have the ANSI C header files. */
+#define STDC_HEADERS 1
+
+/* Define to 1 if you can safely include both <sys/time.h> and <time.h>. */
+#define TIME_WITH_SYS_TIME 1
+
+/* Define to 1 if your <sys/time.h> declares `struct tm'. */
+/* #undef TM_IN_SYS_TIME */
+
+/* Define if compat/endian_enc.h is required */
+/* #undef USE_COMPAT_ENDIAN_ENC_H */
+
+/* Define if compat/endian.h is required */
+/* #undef USE_COMPAT_ENDIAN_H */
+
+/* Define if endian.h should be included */
+/* #undef USE_ENDIAN_H */
+
+/* Define if machine/endian.h should be included */
+/* #undef USE_MACHINE_ENDIAN_H */
+
+/* Define if uses Mach IPC for Triggers messages */
+/* #undef USE_MACH_IPC */
+
+/* Define to use native include files */
+/* #undef USE_NATIVE_INCLUDES */
+
+/* Define if sys/endian.h should be included */
+#define USE_SYS_ENDIAN_H /**/
+
+/* Version number of package */
+#define VERSION "1.2-alpha4"
+
+/* Define to 1 if `lex' declares `yytext' as a `char *' by default, not a
+ `char[]'. */
+#define YYTEXT_POINTER 1
+
+/* Use extended API on platforms that require it */
+#define _GNU_SOURCE /**/
+
+/* Define to empty if `const' does not conform to ANSI C. */
+/* #undef const */
+
+/* Define to `int' if <sys/types.h> doesn't define. */
+/* #undef gid_t */
+
+/* Define to rpl_malloc if the replacement function should be used. */
+/* #undef malloc */
+
+/* Define to `int' if <sys/types.h> does not define. */
+/* #undef pid_t */
+
+/* Define to `unsigned int' if <sys/types.h> does not define. */
+/* #undef size_t */
+
+/* Define to `int' if <sys/types.h> doesn't define. */
+/* #undef uid_t */
+
+/* Define as `fork' if `vfork' does not work. */
+/* #undef vfork */
Deleted: vendor/openbsm/1.2_alpha4/config/config.h.in
===================================================================
--- vendor/openbsm/dist/config/config.h.in 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/config/config.h.in 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,193 +0,0 @@
-/* config/config.h.in. Generated from configure.ac by autoheader. */
-
-/* Define to 1 if you have the `alarm' function. */
-#undef HAVE_ALARM
-
-/* Define if audit system calls present */
-#undef HAVE_AUDIT_SYSCALLS
-
-/* Define to 1 if you have the `bzero' function. */
-#undef HAVE_BZERO
-
-/* Define to 1 if your system has a working `chown' function. */
-#undef HAVE_CHOWN
-
-/* Define to 1 if you have the `clock_gettime' function. */
-#undef HAVE_CLOCK_GETTIME
-
-/* Define to 1 if you have the <dlfcn.h> header file. */
-#undef HAVE_DLFCN_H
-
-/* Define to 1 if you have the <endian.h> header file. */
-#undef HAVE_ENDIAN_H
-
-/* Define to 1 if you have the `fork' function. */
-#undef HAVE_FORK
-
-/* Define to 1 if you have the `ftruncate' function. */
-#undef HAVE_FTRUNCATE
-
-/* Define if queue.h includes LIST_FIRST */
-#undef HAVE_FULL_QUEUE_H
-
-/* Define to 1 if you have the `gettimeofday' function. */
-#undef HAVE_GETTIMEOFDAY
-
-/* Define to 1 if you have the `inet_ntoa' function. */
-#undef HAVE_INET_NTOA
-
-/* Define to 1 if you have the <inttypes.h> header file. */
-#undef HAVE_INTTYPES_H
-
-/* Define if ipc_perm.__key instead of key */
-#undef HAVE_IPC_PERM___KEY
-
-/* Define if ipc_perm.__seq instead of seq */
-#undef HAVE_IPC_PERM___SEQ
-
-/* Define to 1 if you have the <machine/endian.h> header file. */
-#undef HAVE_MACHINE_ENDIAN_H
-
-/* Define to 1 if you have the <mach/mach.h> header file. */
-#undef HAVE_MACH_MACH_H
-
-/* Define to 1 if your system has a GNU libc compatible `malloc' function, and
- to 0 otherwise. */
-#undef HAVE_MALLOC
-
-/* Define to 1 if you have the <memory.h> header file. */
-#undef HAVE_MEMORY_H
-
-/* Define to 1 if you have the `memset' function. */
-#undef HAVE_MEMSET
-
-/* Define to 1 if `stat' has the bug that it succeeds when given the
- zero-length file name argument. */
-#undef HAVE_STAT_EMPTY_STRING_BUG
-
-/* Define to 1 if you have the <stdint.h> header file. */
-#undef HAVE_STDINT_H
-
-/* Define to 1 if you have the <stdlib.h> header file. */
-#undef HAVE_STDLIB_H
-
-/* Define to 1 if you have the `strchr' function. */
-#undef HAVE_STRCHR
-
-/* Define to 1 if you have the `strerror' function. */
-#undef HAVE_STRERROR
-
-/* Define to 1 if you have the `strftime' function. */
-#undef HAVE_STRFTIME
-
-/* Define to 1 if you have the <strings.h> header file. */
-#undef HAVE_STRINGS_H
-
-/* Define to 1 if you have the <string.h> header file. */
-#undef HAVE_STRING_H
-
-/* Define to 1 if you have the `strlcat' function. */
-#undef HAVE_STRLCAT
-
-/* Define to 1 if you have the `strrchr' function. */
-#undef HAVE_STRRCHR
-
-/* Define to 1 if you have the `strstr' function. */
-#undef HAVE_STRSTR
-
-/* Define to 1 if you have the `strtol' function. */
-#undef HAVE_STRTOL
-
-/* Define to 1 if you have the `strtoul' function. */
-#undef HAVE_STRTOUL
-
-/* Define to 1 if `st_rdev' is member of `struct stat'. */
-#undef HAVE_STRUCT_STAT_ST_RDEV
-
-/* Define to 1 if you have the <sys/endian.h> header file. */
-#undef HAVE_SYS_ENDIAN_H
-
-/* Define to 1 if you have the <sys/stat.h> header file. */
-#undef HAVE_SYS_STAT_H
-
-/* Define to 1 if you have the <sys/time.h> header file. */
-#undef HAVE_SYS_TIME_H
-
-/* Define to 1 if you have the <sys/types.h> header file. */
-#undef HAVE_SYS_TYPES_H
-
-/* Define to 1 if you have <sys/wait.h> that is POSIX.1 compatible. */
-#undef HAVE_SYS_WAIT_H
-
-/* Define to 1 if you have the <unistd.h> header file. */
-#undef HAVE_UNISTD_H
-
-/* Define to 1 if you have the `vfork' function. */
-#undef HAVE_VFORK
-
-/* Define to 1 if you have the <vfork.h> header file. */
-#undef HAVE_VFORK_H
-
-/* Define to 1 if `fork' works. */
-#undef HAVE_WORKING_FORK
-
-/* Define to 1 if `vfork' works. */
-#undef HAVE_WORKING_VFORK
-
-/* Define to 1 if `lstat' dereferences a symlink specified with a trailing
- slash. */
-#undef LSTAT_FOLLOWS_SLASHED_SYMLINK
-
-/* Name of package */
-#undef PACKAGE
-
-/* Define to the address where bug reports for this package should be sent. */
-#undef PACKAGE_BUGREPORT
-
-/* Define to the full name of this package. */
-#undef PACKAGE_NAME
-
-/* Define to the full name and version of this package. */
-#undef PACKAGE_STRING
-
-/* Define to the one symbol short name of this package. */
-#undef PACKAGE_TARNAME
-
-/* Define to the version of this package. */
-#undef PACKAGE_VERSION
-
-/* Define as the return type of signal handlers (`int' or `void'). */
-#undef RETSIGTYPE
-
-/* Define to 1 if you have the ANSI C header files. */
-#undef STDC_HEADERS
-
-/* Define to 1 if you can safely include both <sys/time.h> and <time.h>. */
-#undef TIME_WITH_SYS_TIME
-
-/* Define to 1 if your <sys/time.h> declares `struct tm'. */
-#undef TM_IN_SYS_TIME
-
-/* Version number of package */
-#undef VERSION
-
-/* Define to empty if `const' does not conform to ANSI C. */
-#undef const
-
-/* Define to `int' if <sys/types.h> doesn't define. */
-#undef gid_t
-
-/* Define to rpl_malloc if the replacement function should be used. */
-#undef malloc
-
-/* Define to `int' if <sys/types.h> does not define. */
-#undef pid_t
-
-/* Define to `unsigned int' if <sys/types.h> does not define. */
-#undef size_t
-
-/* Define to `int' if <sys/types.h> doesn't define. */
-#undef uid_t
-
-/* Define as `fork' if `vfork' does not work. */
-#undef vfork
Copied: vendor/openbsm/1.2_alpha4/config/config.h.in (from rev 11163, vendor/openbsm/dist/config/config.h.in)
===================================================================
--- vendor/openbsm/1.2_alpha4/config/config.h.in (rev 0)
+++ vendor/openbsm/1.2_alpha4/config/config.h.in 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,310 @@
+/* config/config.h.in. Generated from configure.ac by autoheader. */
+
+/* Define to 1 if you have the `alarm' function. */
+#undef HAVE_ALARM
+
+/* Define to 1 if you have the `arc4random' function. */
+#undef HAVE_ARC4RANDOM
+
+/* Define to 1 if you have the `arc4random_buf' function. */
+#undef HAVE_ARC4RANDOM_BUF
+
+/* Define if audit system calls present */
+#undef HAVE_AUDIT_SYSCALLS
+
+/* Define to 1 if you have the `bzero' function. */
+#undef HAVE_BZERO
+
+/* Define to 1 if you have the `cap_enter' function. */
+#undef HAVE_CAP_ENTER
+
+/* Define to 1 if your system has a working `chown' function. */
+#undef HAVE_CHOWN
+
+/* Define to 1 if you have the `clock_gettime' function. */
+#undef HAVE_CLOCK_GETTIME
+
+/* Define to 1 if you have the `closefrom' function. */
+#undef HAVE_CLOSEFROM
+
+/* Define to 1 if you have the <dlfcn.h> header file. */
+#undef HAVE_DLFCN_H
+
+/* Define to 1 if you have the <endian.h> header file. */
+#undef HAVE_ENDIAN_H
+
+/* Define to 1 if you have the `faccessat' function. */
+#undef HAVE_FACCESSAT
+
+/* Define to 1 if you have the `fdopendir' function. */
+#undef HAVE_FDOPENDIR
+
+/* Define to 1 if you have the `fork' function. */
+#undef HAVE_FORK
+
+/* Define to 1 if you have the `fstatat' function. */
+#undef HAVE_FSTATAT
+
+/* Define to 1 if you have the `ftruncate' function. */
+#undef HAVE_FTRUNCATE
+
+/* Define if queue.h includes LIST_FIRST */
+#undef HAVE_FULL_QUEUE_H
+
+/* Define to 1 if you have the `getresgid' function. */
+#undef HAVE_GETRESGID
+
+/* Define to 1 if you have the `getresuid' function. */
+#undef HAVE_GETRESUID
+
+/* Define to 1 if you have the `gettimeofday' function. */
+#undef HAVE_GETTIMEOFDAY
+
+/* Define to 1 if you have the `inet_ntoa' function. */
+#undef HAVE_INET_NTOA
+
+/* Define to 1 if you have the <inttypes.h> header file. */
+#undef HAVE_INTTYPES_H
+
+/* Define if ipc_perm._key instead of key */
+#undef HAVE_IPC_PERM__KEY
+
+/* Define if ipc_perm._seq instead of seq */
+#undef HAVE_IPC_PERM__SEQ
+
+/* Define if ipc_perm.__key instead of key */
+#undef HAVE_IPC_PERM___KEY
+
+/* Define if ipc_perm.__seq instead of seq */
+#undef HAVE_IPC_PERM___SEQ
+
+/* Define to 1 if you have the `jail' function. */
+#undef HAVE_JAIL
+
+/* Define to 1 if you have the `kqueue' function. */
+#undef HAVE_KQUEUE
+
+/* Define to 1 if you have the <machine/endian.h> header file. */
+#undef HAVE_MACHINE_ENDIAN_H
+
+/* Define to 1 if you have the <mach/mach.h> header file. */
+#undef HAVE_MACH_MACH_H
+
+/* Define to 1 if your system has a GNU libc compatible `malloc' function, and
+ to 0 otherwise. */
+#undef HAVE_MALLOC
+
+/* Define to 1 if you have the <memory.h> header file. */
+#undef HAVE_MEMORY_H
+
+/* Define to 1 if you have the `memset' function. */
+#undef HAVE_MEMSET
+
+/* Define to 1 if you have the `openat' function. */
+#undef HAVE_OPENAT
+
+/* Define to 1 if you have the <printf.h> header file. */
+#undef HAVE_PRINTF_H
+
+/* Define to 1 if you have the `pthread_condattr_setclock' function. */
+#undef HAVE_PTHREAD_CONDATTR_SETCLOCK
+
+/* Define to 1 if you have the `pthread_cond_timedwait_relative_np' function.
+ */
+#undef HAVE_PTHREAD_COND_TIMEDWAIT_RELATIVE_NP
+
+/* Define to 1 if you have the `pthread_mutex_lock' function. */
+#undef HAVE_PTHREAD_MUTEX_LOCK
+
+/* Define to 1 if you have the <pthread_np.h> header file. */
+#undef HAVE_PTHREAD_NP_H
+
+/* Define to 1 if you have the `renameat' function. */
+#undef HAVE_RENAMEAT
+
+/* Define to 1 if you have the `setproctitle' function. */
+#undef HAVE_SETPROCTITLE
+
+/* Define to 1 if you have the `sigtimedwait' function. */
+#undef HAVE_SIGTIMEDWAIT
+
+/* Define if sockaddr_storage.ss_len field exists */
+#undef HAVE_SOCKADDR_STORAGE_SS_LEN
+
+/* Define to 1 if `stat' has the bug that it succeeds when given the
+ zero-length file name argument. */
+#undef HAVE_STAT_EMPTY_STRING_BUG
+
+/* Define to 1 if you have the <stdint.h> header file. */
+#undef HAVE_STDINT_H
+
+/* Define to 1 if you have the <stdlib.h> header file. */
+#undef HAVE_STDLIB_H
+
+/* Define to 1 if you have the `strchr' function. */
+#undef HAVE_STRCHR
+
+/* Define to 1 if you have the `strerror' function. */
+#undef HAVE_STRERROR
+
+/* Define to 1 if you have the `strftime' function. */
+#undef HAVE_STRFTIME
+
+/* Define to 1 if you have the <strings.h> header file. */
+#undef HAVE_STRINGS_H
+
+/* Define to 1 if you have the <string.h> header file. */
+#undef HAVE_STRING_H
+
+/* Define to 1 if you have the `strlcat' function. */
+#undef HAVE_STRLCAT
+
+/* Define to 1 if you have the `strlcpy' function. */
+#undef HAVE_STRLCPY
+
+/* Define to 1 if you have the `strndup' function. */
+#undef HAVE_STRNDUP
+
+/* Define to 1 if you have the `strrchr' function. */
+#undef HAVE_STRRCHR
+
+/* Define to 1 if you have the `strstr' function. */
+#undef HAVE_STRSTR
+
+/* Define to 1 if you have the `strtol' function. */
+#undef HAVE_STRTOL
+
+/* Define to 1 if you have the `strtoul' function. */
+#undef HAVE_STRTOUL
+
+/* Define to 1 if `st_rdev' is a member of `struct stat'. */
+#undef HAVE_STRUCT_STAT_ST_RDEV
+
+/* Define to 1 if you have the <sys/endian.h> header file. */
+#undef HAVE_SYS_ENDIAN_H
+
+/* Define to 1 if you have the <sys/stat.h> header file. */
+#undef HAVE_SYS_STAT_H
+
+/* Define to 1 if you have the <sys/time.h> header file. */
+#undef HAVE_SYS_TIME_H
+
+/* Define to 1 if you have the <sys/types.h> header file. */
+#undef HAVE_SYS_TYPES_H
+
+/* Define to 1 if you have <sys/wait.h> that is POSIX.1 compatible. */
+#undef HAVE_SYS_WAIT_H
+
+/* Define to 1 if you have the <unistd.h> header file. */
+#undef HAVE_UNISTD_H
+
+/* Define to 1 if you have the `unlinkat' function. */
+#undef HAVE_UNLINKAT
+
+/* Define to 1 if you have the `vfork' function. */
+#undef HAVE_VFORK
+
+/* Define to 1 if you have the <vfork.h> header file. */
+#undef HAVE_VFORK_H
+
+/* Define to 1 if you have the `vis' function. */
+#undef HAVE_VIS
+
+/* Define to 1 if `fork' works. */
+#undef HAVE_WORKING_FORK
+
+/* Define to 1 if `vfork' works. */
+#undef HAVE_WORKING_VFORK
+
+/* Define to 1 if `lstat' dereferences a symlink specified with a trailing
+ slash. */
+#undef LSTAT_FOLLOWS_SLASHED_SYMLINK
+
+/* Define to the sub-directory in which libtool stores uninstalled libraries.
+ */
+#undef LT_OBJDIR
+
+/* Name of package */
+#undef PACKAGE
+
+/* Define to the address where bug reports for this package should be sent. */
+#undef PACKAGE_BUGREPORT
+
+/* Define to the full name of this package. */
+#undef PACKAGE_NAME
+
+/* Define to the full name and version of this package. */
+#undef PACKAGE_STRING
+
+/* Define to the one symbol short name of this package. */
+#undef PACKAGE_TARNAME
+
+/* Define to the home page for this package. */
+#undef PACKAGE_URL
+
+/* Define to the version of this package. */
+#undef PACKAGE_VERSION
+
+/* Define as the return type of signal handlers (`int' or `void'). */
+#undef RETSIGTYPE
+
+/* Define to 1 if you have the ANSI C header files. */
+#undef STDC_HEADERS
+
+/* Define to 1 if you can safely include both <sys/time.h> and <time.h>. */
+#undef TIME_WITH_SYS_TIME
+
+/* Define to 1 if your <sys/time.h> declares `struct tm'. */
+#undef TM_IN_SYS_TIME
+
+/* Define if compat/endian_enc.h is required */
+#undef USE_COMPAT_ENDIAN_ENC_H
+
+/* Define if compat/endian.h is required */
+#undef USE_COMPAT_ENDIAN_H
+
+/* Define if endian.h should be included */
+#undef USE_ENDIAN_H
+
+/* Define if machine/endian.h should be included */
+#undef USE_MACHINE_ENDIAN_H
+
+/* Define if uses Mach IPC for Triggers messages */
+#undef USE_MACH_IPC
+
+/* Define to use native include files */
+#undef USE_NATIVE_INCLUDES
+
+/* Define if sys/endian.h should be included */
+#undef USE_SYS_ENDIAN_H
+
+/* Version number of package */
+#undef VERSION
+
+/* Define to 1 if `lex' declares `yytext' as a `char *' by default, not a
+ `char[]'. */
+#undef YYTEXT_POINTER
+
+/* Use extended API on platforms that require it */
+#undef _GNU_SOURCE
+
+/* Define to empty if `const' does not conform to ANSI C. */
+#undef const
+
+/* Define to `int' if <sys/types.h> doesn't define. */
+#undef gid_t
+
+/* Define to rpl_malloc if the replacement function should be used. */
+#undef malloc
+
+/* Define to `int' if <sys/types.h> does not define. */
+#undef pid_t
+
+/* Define to `unsigned int' if <sys/types.h> does not define. */
+#undef size_t
+
+/* Define to `int' if <sys/types.h> doesn't define. */
+#undef uid_t
+
+/* Define as `fork' if `vfork' does not work. */
+#undef vfork
Deleted: vendor/openbsm/1.2_alpha4/config/ltmain.sh
===================================================================
--- vendor/openbsm/dist/config/ltmain.sh 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/config/ltmain.sh 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,6986 +0,0 @@
-# ltmain.sh - Provide generalized library-building support services.
-# NOTE: Changing this file will not affect anything until you rerun configure.
-#
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006,
-# 2007 Free Software Foundation, Inc.
-# Originally by Gordon Matzigkeit <gord at gnu.ai.mit.edu>, 1996
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-basename="s,^.*/,,g"
-
-# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
-# is ksh but when the shell is invoked as "sh" and the current value of
-# the _XPG environment variable is not equal to 1 (one), the special
-# positional parameter $0, within a function call, is the name of the
-# function.
-progpath="$0"
-
-# The name of this program:
-progname=`echo "$progpath" | $SED $basename`
-modename="$progname"
-
-# Global variables:
-EXIT_SUCCESS=0
-EXIT_FAILURE=1
-
-PROGRAM=ltmain.sh
-PACKAGE=libtool
-VERSION=1.5.24
-TIMESTAMP=" (1.1220.2.455 2007/06/24 02:13:29)"
-
-# Be Bourne compatible (taken from Autoconf:_AS_BOURNE_COMPATIBLE).
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
- emulate sh
- NULLCMD=:
- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
- setopt NO_GLOB_SUBST
-else
- case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
-fi
-BIN_SH=xpg4; export BIN_SH # for Tru64
-DUALCASE=1; export DUALCASE # for MKS sh
-
-# Check that we have a working $echo.
-if test "X$1" = X--no-reexec; then
- # Discard the --no-reexec flag, and continue.
- shift
-elif test "X$1" = X--fallback-echo; then
- # Avoid inline document here, it may be left over
- :
-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
- # Yippee, $echo works!
- :
-else
- # Restart under the correct shell, and then maybe $echo will work.
- exec $SHELL "$progpath" --no-reexec ${1+"$@"}
-fi
-
-if test "X$1" = X--fallback-echo; then
- # used as fallback echo
- shift
- cat <<EOF
-$*
-EOF
- exit $EXIT_SUCCESS
-fi
-
-default_mode=
-help="Try \`$progname --help' for more information."
-magic="%%%MAGIC variable%%%"
-mkdir="mkdir"
-mv="mv -f"
-rm="rm -f"
-
-# Sed substitution that helps us do robust quoting. It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed="${SED}"' -e 1s/^X//'
-sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g'
-# test EBCDIC or ASCII
-case `echo X|tr X '\101'` in
- A) # ASCII based system
- # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
- SP2NL='tr \040 \012'
- NL2SP='tr \015\012 \040\040'
- ;;
- *) # EBCDIC based system
- SP2NL='tr \100 \n'
- NL2SP='tr \r\n \100\100'
- ;;
-esac
-
-# NLS nuisances.
-# Only set LANG and LC_ALL to C if already set.
-# These must not be set unconditionally because not all systems understand
-# e.g. LANG=C (notably SCO).
-# We save the old values to restore during execute mode.
-for lt_var in LANG LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
-do
- eval "if test \"\${$lt_var+set}\" = set; then
- save_$lt_var=\$$lt_var
- $lt_var=C
- export $lt_var
- fi"
-done
-
-# Make sure IFS has a sensible default
-lt_nl='
-'
-IFS=" $lt_nl"
-
-if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
- $echo "$modename: not configured to build any kind of library" 1>&2
- $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
- exit $EXIT_FAILURE
-fi
-
-# Global variables.
-mode=$default_mode
-nonopt=
-prev=
-prevopt=
-run=
-show="$echo"
-show_help=
-execute_dlfiles=
-duplicate_deps=no
-preserve_args=
-lo2o="s/\\.lo\$/.${objext}/"
-o2lo="s/\\.${objext}\$/.lo/"
-extracted_archives=
-extracted_serial=0
-
-#####################################
-# Shell function definitions:
-# This seems to be the best place for them
-
-# func_mktempdir [string]
-# Make a temporary directory that won't clash with other running
-# libtool processes, and avoids race conditions if possible. If
-# given, STRING is the basename for that directory.
-func_mktempdir ()
-{
- my_template="${TMPDIR-/tmp}/${1-$progname}"
-
- if test "$run" = ":"; then
- # Return a directory name, but don't create it in dry-run mode
- my_tmpdir="${my_template}-$$"
- else
-
- # If mktemp works, use that first and foremost
- my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
-
- if test ! -d "$my_tmpdir"; then
- # Failing that, at least try and use $RANDOM to avoid a race
- my_tmpdir="${my_template}-${RANDOM-0}$$"
-
- save_mktempdir_umask=`umask`
- umask 0077
- $mkdir "$my_tmpdir"
- umask $save_mktempdir_umask
- fi
-
- # If we're not in dry-run mode, bomb out on failure
- test -d "$my_tmpdir" || {
- $echo "cannot create temporary directory \`$my_tmpdir'" 1>&2
- exit $EXIT_FAILURE
- }
- fi
-
- $echo "X$my_tmpdir" | $Xsed
-}
-
-
-# func_win32_libid arg
-# return the library type of file 'arg'
-#
-# Need a lot of goo to handle *both* DLLs and import libs
-# Has to be a shell function in order to 'eat' the argument
-# that is supplied when $file_magic_command is called.
-func_win32_libid ()
-{
- win32_libid_type="unknown"
- win32_fileres=`file -L $1 2>/dev/null`
- case $win32_fileres in
- *ar\ archive\ import\ library*) # definitely import
- win32_libid_type="x86 archive import"
- ;;
- *ar\ archive*) # could be an import, or static
- if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | \
- $EGREP -e 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
- win32_nmres=`eval $NM -f posix -A $1 | \
- $SED -n -e '1,100{
- / I /{
- s,.*,import,
- p
- q
- }
- }'`
- case $win32_nmres in
- import*) win32_libid_type="x86 archive import";;
- *) win32_libid_type="x86 archive static";;
- esac
- fi
- ;;
- *DLL*)
- win32_libid_type="x86 DLL"
- ;;
- *executable*) # but shell scripts are "executable" too...
- case $win32_fileres in
- *MS\ Windows\ PE\ Intel*)
- win32_libid_type="x86 DLL"
- ;;
- esac
- ;;
- esac
- $echo $win32_libid_type
-}
-
-
-# func_infer_tag arg
-# Infer tagged configuration to use if any are available and
-# if one wasn't chosen via the "--tag" command line option.
-# Only attempt this if the compiler in the base compile
-# command doesn't match the default compiler.
-# arg is usually of the form 'gcc ...'
-func_infer_tag ()
-{
- # FreeBSD-specific: where we install compilers with non-standard names
- tag_compilers_CC="*cc cc* *gcc gcc*"
- tag_compilers_CXX="*c++ c++* *g++ g++*"
- base_compiler=`set -- "$@"; echo $1`
-
- # If $tagname isn't set, then try to infer if the default "CC" tag applies
- if test -z "$tagname"; then
- for zp in $tag_compilers_CC; do
- case $base_compiler in
- $zp) tagname="CC"; break;;
- esac
- done
- fi
-
- if test -n "$available_tags" && test -z "$tagname"; then
- CC_quoted=
- for arg in $CC; do
- case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- arg="\"$arg\""
- ;;
- esac
- CC_quoted="$CC_quoted $arg"
- done
- case $@ in
- # Blanks in the command may have been stripped by the calling shell,
- # but not from the CC environment variable when configure was run.
- " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) ;;
- # Blanks at the start of $base_compile will cause this to fail
- # if we don't check for them as well.
- *)
- for z in $available_tags; do
- if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
- # Evaluate the configuration.
- eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
- CC_quoted=
- for arg in $CC; do
- # Double-quote args containing other shell metacharacters.
- case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- arg="\"$arg\""
- ;;
- esac
- CC_quoted="$CC_quoted $arg"
- done
- case "$@ " in
- " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*)
- # The compiler in the base compile command matches
- # the one in the tagged configuration.
- # Assume this is the tagged configuration we want.
- tagname=$z
- break
- ;;
- esac
-
- # FreeBSD-specific: try compilers based on inferred tag
- if test -z "$tagname"; then
- eval "tag_compilers=\$tag_compilers_${z}"
- if test -n "$tag_compilers"; then
- for zp in $tag_compilers; do
- case $base_compiler in
- $zp) tagname=$z; break;;
- esac
- done
- if test -n "$tagname"; then
- break
- fi
- fi
- fi
- fi
- done
- # If $tagname still isn't set, then no tagged configuration
- # was found and let the user know that the "--tag" command
- # line option must be used.
- if test -z "$tagname"; then
- $echo "$modename: unable to infer tagged configuration"
- $echo "$modename: specify a tag with \`--tag'" 1>&2
- exit $EXIT_FAILURE
-# else
-# $echo "$modename: using $tagname tagged configuration"
- fi
- ;;
- esac
- fi
-}
-
-
-# func_extract_an_archive dir oldlib
-func_extract_an_archive ()
-{
- f_ex_an_ar_dir="$1"; shift
- f_ex_an_ar_oldlib="$1"
-
- $show "(cd $f_ex_an_ar_dir && $AR x $f_ex_an_ar_oldlib)"
- $run eval "(cd \$f_ex_an_ar_dir && $AR x \$f_ex_an_ar_oldlib)" || exit $?
- if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
- :
- else
- $echo "$modename: ERROR: object name conflicts: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" 1>&2
- exit $EXIT_FAILURE
- fi
-}
-
-# func_extract_archives gentop oldlib ...
-func_extract_archives ()
-{
- my_gentop="$1"; shift
- my_oldlibs=${1+"$@"}
- my_oldobjs=""
- my_xlib=""
- my_xabs=""
- my_xdir=""
- my_status=""
-
- $show "${rm}r $my_gentop"
- $run ${rm}r "$my_gentop"
- $show "$mkdir $my_gentop"
- $run $mkdir "$my_gentop"
- my_status=$?
- if test "$my_status" -ne 0 && test ! -d "$my_gentop"; then
- exit $my_status
- fi
-
- for my_xlib in $my_oldlibs; do
- # Extract the objects.
- case $my_xlib in
- [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
- *) my_xabs=`pwd`"/$my_xlib" ;;
- esac
- my_xlib=`$echo "X$my_xlib" | $Xsed -e 's%^.*/%%'`
- my_xlib_u=$my_xlib
- while :; do
- case " $extracted_archives " in
- *" $my_xlib_u "*)
- extracted_serial=`expr $extracted_serial + 1`
- my_xlib_u=lt$extracted_serial-$my_xlib ;;
- *) break ;;
- esac
- done
- extracted_archives="$extracted_archives $my_xlib_u"
- my_xdir="$my_gentop/$my_xlib_u"
-
- $show "${rm}r $my_xdir"
- $run ${rm}r "$my_xdir"
- $show "$mkdir $my_xdir"
- $run $mkdir "$my_xdir"
- exit_status=$?
- if test "$exit_status" -ne 0 && test ! -d "$my_xdir"; then
- exit $exit_status
- fi
- case $host in
- *-darwin*)
- $show "Extracting $my_xabs"
- # Do not bother doing anything if just a dry run
- if test -z "$run"; then
- darwin_orig_dir=`pwd`
- cd $my_xdir || exit $?
- darwin_archive=$my_xabs
- darwin_curdir=`pwd`
- darwin_base_archive=`$echo "X$darwin_archive" | $Xsed -e 's%^.*/%%'`
- darwin_arches=`lipo -info "$darwin_archive" 2>/dev/null | $EGREP Architectures 2>/dev/null`
- if test -n "$darwin_arches"; then
- darwin_arches=`echo "$darwin_arches" | $SED -e 's/.*are://'`
- darwin_arch=
- $show "$darwin_base_archive has multiple architectures $darwin_arches"
- for darwin_arch in $darwin_arches ; do
- mkdir -p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
- lipo -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
- cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
- func_extract_an_archive "`pwd`" "${darwin_base_archive}"
- cd "$darwin_curdir"
- $rm "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
- done # $darwin_arches
- ## Okay now we have a bunch of thin objects, gotta fatten them up :)
- darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print| xargs basename | sort -u | $NL2SP`
- darwin_file=
- darwin_files=
- for darwin_file in $darwin_filelist; do
- darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
- lipo -create -output "$darwin_file" $darwin_files
- done # $darwin_filelist
- ${rm}r unfat-$$
- cd "$darwin_orig_dir"
- else
- cd "$darwin_orig_dir"
- func_extract_an_archive "$my_xdir" "$my_xabs"
- fi # $darwin_arches
- fi # $run
- ;;
- *)
- func_extract_an_archive "$my_xdir" "$my_xabs"
- ;;
- esac
- my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
- done
- func_extract_archives_result="$my_oldobjs"
-}
-# End of Shell function definitions
-#####################################
-
-# Darwin sucks
-eval std_shrext=\"$shrext_cmds\"
-
-disable_libs=no
-
-# Parse our command line options once, thoroughly.
-while test "$#" -gt 0
-do
- arg="$1"
- shift
-
- case $arg in
- -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;;
- *) optarg= ;;
- esac
-
- # If the previous option needs an argument, assign it.
- if test -n "$prev"; then
- case $prev in
- execute_dlfiles)
- execute_dlfiles="$execute_dlfiles $arg"
- ;;
- tag)
- tagname="$arg"
- preserve_args="${preserve_args}=$arg"
-
- # Check whether tagname contains only valid characters
- case $tagname in
- *[!-_A-Za-z0-9,/]*)
- $echo "$progname: invalid tag name: $tagname" 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
-
- case $tagname in
- CC)
- # Don't test for the "default" C tag, as we know, it's there, but
- # not specially marked.
- ;;
- *)
- if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$progpath" > /dev/null; then
- taglist="$taglist $tagname"
- # Evaluate the configuration.
- eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $progpath`"
- else
- $echo "$progname: ignoring unknown tag $tagname" 1>&2
- fi
- ;;
- esac
- ;;
- *)
- eval "$prev=\$arg"
- ;;
- esac
-
- prev=
- prevopt=
- continue
- fi
-
- # Have we seen a non-optional argument yet?
- case $arg in
- --help)
- show_help=yes
- ;;
-
- --version)
- echo "\
-$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP
-
-Copyright (C) 2007 Free Software Foundation, Inc.
-This is free software; see the source for copying conditions. There is NO
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
- exit $?
- ;;
-
- --config)
- ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $progpath
- # Now print the configurations for the tags.
- for tagname in $taglist; do
- ${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$progpath"
- done
- exit $?
- ;;
-
- --debug)
- $echo "$progname: enabling shell trace mode"
- set -x
- preserve_args="$preserve_args $arg"
- ;;
-
- --dry-run | -n)
- run=:
- ;;
-
- --features)
- $echo "host: $host"
- if test "$build_libtool_libs" = yes; then
- $echo "enable shared libraries"
- else
- $echo "disable shared libraries"
- fi
- if test "$build_old_libs" = yes; then
- $echo "enable static libraries"
- else
- $echo "disable static libraries"
- fi
- exit $?
- ;;
-
- --finish) mode="finish" ;;
-
- --mode) prevopt="--mode" prev=mode ;;
- --mode=*) mode="$optarg" ;;
-
- --preserve-dup-deps) duplicate_deps="yes" ;;
-
- --quiet | --silent)
- show=:
- preserve_args="$preserve_args $arg"
- ;;
-
- --tag)
- prevopt="--tag"
- prev=tag
- preserve_args="$preserve_args --tag"
- ;;
- --tag=*)
- set tag "$optarg" ${1+"$@"}
- shift
- prev=tag
- preserve_args="$preserve_args --tag"
- ;;
-
- -dlopen)
- prevopt="-dlopen"
- prev=execute_dlfiles
- ;;
-
- -*)
- $echo "$modename: unrecognized option \`$arg'" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- ;;
-
- *)
- nonopt="$arg"
- break
- ;;
- esac
-done
-
-if test -n "$prevopt"; then
- $echo "$modename: option \`$prevopt' requires an argument" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
-fi
-
-case $disable_libs in
-no)
- ;;
-shared)
- build_libtool_libs=no
- build_old_libs=yes
- ;;
-static)
- build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
- ;;
-esac
-
-# If this variable is set in any of the actions, the command in it
-# will be execed at the end. This prevents here-documents from being
-# left over by shells.
-exec_cmd=
-
-if test -z "$show_help"; then
-
- # Infer the operation mode.
- if test -z "$mode"; then
- $echo "*** Warning: inferring the mode of operation is deprecated." 1>&2
- $echo "*** Future versions of Libtool will require --mode=MODE be specified." 1>&2
- case $nonopt in
- *cc | cc* | *++ | gcc* | *-gcc* | g++* | xlc*)
- mode=link
- for arg
- do
- case $arg in
- -c)
- mode=compile
- break
- ;;
- esac
- done
- ;;
- *db | *dbx | *strace | *truss)
- mode=execute
- ;;
- *install*|cp|mv)
- mode=install
- ;;
- *rm)
- mode=uninstall
- ;;
- *)
- # If we have no mode, but dlfiles were specified, then do execute mode.
- test -n "$execute_dlfiles" && mode=execute
-
- # Just use the default operation mode.
- if test -z "$mode"; then
- if test -n "$nonopt"; then
- $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2
- else
- $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2
- fi
- fi
- ;;
- esac
- fi
-
- # Only execute mode is allowed to have -dlopen flags.
- if test -n "$execute_dlfiles" && test "$mode" != execute; then
- $echo "$modename: unrecognized option \`-dlopen'" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
-
- # Change the help message to a mode-specific one.
- generic_help="$help"
- help="Try \`$modename --help --mode=$mode' for more information."
-
- # These modes are in order of execution frequency so that they run quickly.
- case $mode in
- # libtool compile mode
- compile)
- modename="$modename: compile"
- # Get the compilation command and the source file.
- base_compile=
- srcfile="$nonopt" # always keep a non-empty value in "srcfile"
- suppress_opt=yes
- suppress_output=
- arg_mode=normal
- libobj=
- later=
-
- for arg
- do
- case $arg_mode in
- arg )
- # do not "continue". Instead, add this to base_compile
- lastarg="$arg"
- arg_mode=normal
- ;;
-
- target )
- libobj="$arg"
- arg_mode=normal
- continue
- ;;
-
- normal )
- # Accept any command-line options.
- case $arg in
- -o)
- if test -n "$libobj" ; then
- $echo "$modename: you cannot specify \`-o' more than once" 1>&2
- exit $EXIT_FAILURE
- fi
- arg_mode=target
- continue
- ;;
-
- -static | -prefer-pic | -prefer-non-pic)
- later="$later $arg"
- continue
- ;;
-
- -no-suppress)
- suppress_opt=no
- continue
- ;;
-
- -Xcompiler)
- arg_mode=arg # the next one goes into the "base_compile" arg list
- continue # The current "srcfile" will either be retained or
- ;; # replaced later. I would guess that would be a bug.
-
- -Wc,*)
- args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"`
- lastarg=
- save_ifs="$IFS"; IFS=','
- for arg in $args; do
- IFS="$save_ifs"
-
- # Double-quote args containing other shell metacharacters.
- # Many Bourne shells cannot handle close brackets correctly
- # in scan sets, so we specify it separately.
- case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- arg="\"$arg\""
- ;;
- esac
- lastarg="$lastarg $arg"
- done
- IFS="$save_ifs"
- lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"`
-
- # Add the arguments to base_compile.
- base_compile="$base_compile $lastarg"
- continue
- ;;
-
- * )
- # Accept the current argument as the source file.
- # The previous "srcfile" becomes the current argument.
- #
- lastarg="$srcfile"
- srcfile="$arg"
- ;;
- esac # case $arg
- ;;
- esac # case $arg_mode
-
- # Aesthetically quote the previous argument.
- lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"`
-
- case $lastarg in
- # Double-quote args containing other shell metacharacters.
- # Many Bourne shells cannot handle close brackets correctly
- # in scan sets, and some SunOS ksh mistreat backslash-escaping
- # in scan sets (worked around with variable expansion),
- # and furthermore cannot handle '|' '&' '(' ')' in scan sets
- # at all, so we specify them separately.
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- lastarg="\"$lastarg\""
- ;;
- esac
-
- base_compile="$base_compile $lastarg"
- done # for arg
-
- case $arg_mode in
- arg)
- $echo "$modename: you must specify an argument for -Xcompile"
- exit $EXIT_FAILURE
- ;;
- target)
- $echo "$modename: you must specify a target with \`-o'" 1>&2
- exit $EXIT_FAILURE
- ;;
- *)
- # Get the name of the library object.
- [ -z "$libobj" ] && libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'`
- ;;
- esac
-
- # Recognize several different file suffixes.
- # If the user specifies -o file.o, it is replaced with file.lo
- xform='[cCFSifmso]'
- case $libobj in
- *.ada) xform=ada ;;
- *.adb) xform=adb ;;
- *.ads) xform=ads ;;
- *.asm) xform=asm ;;
- *.c++) xform=c++ ;;
- *.cc) xform=cc ;;
- *.ii) xform=ii ;;
- *.class) xform=class ;;
- *.cpp) xform=cpp ;;
- *.cxx) xform=cxx ;;
- *.[fF][09]?) xform=[fF][09]. ;;
- *.for) xform=for ;;
- *.java) xform=java ;;
- *.obj) xform=obj ;;
- esac
-
- libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`
-
- case $libobj in
- *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;;
- *)
- $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
-
- func_infer_tag $base_compile
-
- for arg in $later; do
- case $arg in
- -static)
- build_old_libs=yes
- continue
- ;;
-
- -prefer-pic)
- pic_mode=yes
- continue
- ;;
-
- -prefer-non-pic)
- pic_mode=no
- continue
- ;;
- esac
- done
-
- qlibobj=`$echo "X$libobj" | $Xsed -e "$sed_quote_subst"`
- case $qlibobj in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- qlibobj="\"$qlibobj\"" ;;
- esac
- test "X$libobj" != "X$qlibobj" \
- && $echo "X$libobj" | grep '[]~#^*{};<>?"'"'"' &()|`$[]' \
- && $echo "$modename: libobj name \`$libobj' may not contain shell special characters."
- objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
- xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
- if test "X$xdir" = "X$obj"; then
- xdir=
- else
- xdir=$xdir/
- fi
- lobj=${xdir}$objdir/$objname
-
- if test -z "$base_compile"; then
- $echo "$modename: you must specify a compilation command" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
-
- # Delete any leftover library objects.
- if test "$build_old_libs" = yes; then
- removelist="$obj $lobj $libobj ${libobj}T"
- else
- removelist="$lobj $libobj ${libobj}T"
- fi
-
- $run $rm $removelist
- trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15
-
- # On Cygwin there's no "real" PIC flag so we must build both object types
- case $host_os in
- cygwin* | mingw* | pw32* | os2*)
- pic_mode=default
- ;;
- esac
- if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
- # non-PIC code in shared libraries is not supported
- pic_mode=default
- fi
-
- # Calculate the filename of the output object if compiler does
- # not support -o with -c
- if test "$compiler_c_o" = no; then
- output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
- lockfile="$output_obj.lock"
- removelist="$removelist $output_obj $lockfile"
- trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15
- else
- output_obj=
- need_locks=no
- lockfile=
- fi
-
- # Lock this critical section if it is needed
- # We use this script file to make the link, it avoids creating a new file
- if test "$need_locks" = yes; then
- until $run ln "$progpath" "$lockfile" 2>/dev/null; do
- $show "Waiting for $lockfile to be removed"
- sleep 2
- done
- elif test "$need_locks" = warn; then
- if test -f "$lockfile"; then
- $echo "\
-*** ERROR, $lockfile exists and contains:
-`cat $lockfile 2>/dev/null`
-
-This indicates that another process is trying to use the same
-temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together. If you
-repeat this compilation, it may succeed, by chance, but you had better
-avoid parallel builds (make -j) in this platform, or get a better
-compiler."
-
- $run $rm $removelist
- exit $EXIT_FAILURE
- fi
- $echo "$srcfile" > "$lockfile"
- fi
-
- if test -n "$fix_srcfile_path"; then
- eval srcfile=\"$fix_srcfile_path\"
- fi
- qsrcfile=`$echo "X$srcfile" | $Xsed -e "$sed_quote_subst"`
- case $qsrcfile in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- qsrcfile="\"$qsrcfile\"" ;;
- esac
-
- $run $rm "$libobj" "${libobj}T"
-
- # Create a libtool object file (analogous to a ".la" file),
- # but don't create it if we're doing a dry run.
- test -z "$run" && cat > ${libobj}T <<EOF
-# $libobj - a libtool object file
-# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
-#
-# Please DO NOT delete this file!
-# It is necessary for linking the library.
-
-# Name of the PIC object.
-EOF
-
- # Only build a PIC object if we are building libtool libraries.
- if test "$build_libtool_libs" = yes; then
- # Without this assignment, base_compile gets emptied.
- fbsd_hideous_sh_bug=$base_compile
-
- if test "$pic_mode" != no; then
- command="$base_compile $qsrcfile $pic_flag"
- else
- # Don't build PIC code
- command="$base_compile $qsrcfile"
- fi
-
- if test ! -d "${xdir}$objdir"; then
- $show "$mkdir ${xdir}$objdir"
- $run $mkdir ${xdir}$objdir
- exit_status=$?
- if test "$exit_status" -ne 0 && test ! -d "${xdir}$objdir"; then
- exit $exit_status
- fi
- fi
-
- if test -z "$output_obj"; then
- # Place PIC objects in $objdir
- command="$command -o $lobj"
- fi
-
- $run $rm "$lobj" "$output_obj"
-
- $show "$command"
- if $run eval "$command"; then :
- else
- test -n "$output_obj" && $run $rm $removelist
- exit $EXIT_FAILURE
- fi
-
- if test "$need_locks" = warn &&
- test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
- $echo "\
-*** ERROR, $lockfile contains:
-`cat $lockfile 2>/dev/null`
-
-but it should contain:
-$srcfile
-
-This indicates that another process is trying to use the same
-temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together. If you
-repeat this compilation, it may succeed, by chance, but you had better
-avoid parallel builds (make -j) in this platform, or get a better
-compiler."
-
- $run $rm $removelist
- exit $EXIT_FAILURE
- fi
-
- # Just move the object if needed, then go on to compile the next one
- if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
- $show "$mv $output_obj $lobj"
- if $run $mv $output_obj $lobj; then :
- else
- error=$?
- $run $rm $removelist
- exit $error
- fi
- fi
-
- # Append the name of the PIC object to the libtool object file.
- test -z "$run" && cat >> ${libobj}T <<EOF
-pic_object='$objdir/$objname'
-
-EOF
-
- # Allow error messages only from the first compilation.
- if test "$suppress_opt" = yes; then
- suppress_output=' >/dev/null 2>&1'
- fi
- else
- # No PIC object so indicate it doesn't exist in the libtool
- # object file.
- test -z "$run" && cat >> ${libobj}T <<EOF
-pic_object=none
-
-EOF
- fi
-
- # Only build a position-dependent object if we build old libraries.
- if test "$build_old_libs" = yes; then
- if test "$pic_mode" != yes; then
- # Don't build PIC code
- command="$base_compile $qsrcfile"
- else
- command="$base_compile $qsrcfile $pic_flag"
- fi
- if test "$compiler_c_o" = yes; then
- command="$command -o $obj"
- fi
-
- # Suppress compiler output if we already did a PIC compilation.
- command="$command$suppress_output"
- $run $rm "$obj" "$output_obj"
- $show "$command"
- if $run eval "$command"; then :
- else
- $run $rm $removelist
- exit $EXIT_FAILURE
- fi
-
- if test "$need_locks" = warn &&
- test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
- $echo "\
-*** ERROR, $lockfile contains:
-`cat $lockfile 2>/dev/null`
-
-but it should contain:
-$srcfile
-
-This indicates that another process is trying to use the same
-temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together. If you
-repeat this compilation, it may succeed, by chance, but you had better
-avoid parallel builds (make -j) in this platform, or get a better
-compiler."
-
- $run $rm $removelist
- exit $EXIT_FAILURE
- fi
-
- # Just move the object if needed
- if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
- $show "$mv $output_obj $obj"
- if $run $mv $output_obj $obj; then :
- else
- error=$?
- $run $rm $removelist
- exit $error
- fi
- fi
-
- # Append the name of the non-PIC object the libtool object file.
- # Only append if the libtool object file exists.
- test -z "$run" && cat >> ${libobj}T <<EOF
-# Name of the non-PIC object.
-non_pic_object='$objname'
-
-EOF
- else
- # Append the name of the non-PIC object the libtool object file.
- # Only append if the libtool object file exists.
- test -z "$run" && cat >> ${libobj}T <<EOF
-# Name of the non-PIC object.
-non_pic_object=none
-
-EOF
- fi
-
- $run $mv "${libobj}T" "${libobj}"
-
- # Unlock the critical section if it was locked
- if test "$need_locks" != no; then
- $run $rm "$lockfile"
- fi
-
- exit $EXIT_SUCCESS
- ;;
-
- # libtool link mode
- link | relink)
- modename="$modename: link"
- case $host in
- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
- # It is impossible to link a dll without this setting, and
- # we shouldn't force the makefile maintainer to figure out
- # which system we are compiling for in order to pass an extra
- # flag for every libtool invocation.
- # allow_undefined=no
-
- # FIXME: Unfortunately, there are problems with the above when trying
- # to make a dll which has undefined symbols, in which case not
- # even a static library is built. For now, we need to specify
- # -no-undefined on the libtool link line when we can be certain
- # that all symbols are satisfied, otherwise we get a static library.
- allow_undefined=yes
- ;;
- *)
- allow_undefined=yes
- ;;
- esac
- libtool_args="$nonopt"
- base_compile="$nonopt $@"
- compile_command="$nonopt"
- finalize_command="$nonopt"
-
- compile_rpath=
- finalize_rpath=
- compile_shlibpath=
- finalize_shlibpath=
- convenience=
- old_convenience=
- deplibs=
- old_deplibs=
- compiler_flags=
- linker_flags=
- dllsearchpath=
- lib_search_path=`pwd`
- inst_prefix_dir=
-
- avoid_version=no
- dlfiles=
- dlprefiles=
- dlself=no
- export_dynamic=no
- export_symbols=
- export_symbols_regex=
- generated=
- libobjs=
- ltlibs=
- module=no
- no_install=no
- objs=
- non_pic_objects=
- notinst_path= # paths that contain not-installed libtool libraries
- precious_files_regex=
- prefer_static_libs=no
- preload=no
- prev=
- prevarg=
- release=
- rpath=
- xrpath=
- perm_rpath=
- temp_rpath=
- thread_safe=no
- vinfo=
- vinfo_number=no
-
- func_infer_tag $base_compile
-
- # We need to know -static, to get the right output filenames.
- for arg
- do
- case $arg in
- -all-static | -static | -static-libtool-libs)
- case $arg in
- -all-static)
- if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
- $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2
- fi
- if test -n "$link_static_flag"; then
- dlopen_self=$dlopen_self_static
- fi
- prefer_static_libs=yes
- ;;
- -static)
- if test -z "$pic_flag" && test -n "$link_static_flag"; then
- dlopen_self=$dlopen_self_static
- fi
- prefer_static_libs=built
- ;;
- -static-libtool-libs)
- if test -z "$pic_flag" && test -n "$link_static_flag"; then
- dlopen_self=$dlopen_self_static
- fi
- prefer_static_libs=yes
- ;;
- esac
- build_libtool_libs=no
- build_old_libs=yes
- break
- ;;
- esac
- done
-
- # See if our shared archives depend on static archives.
- test -n "$old_archive_from_new_cmds" && build_old_libs=yes
-
- # Go through the arguments, transforming them on the way.
- while test "$#" -gt 0; do
- arg="$1"
- shift
- case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test
- ;;
- *) qarg=$arg ;;
- esac
- libtool_args="$libtool_args $qarg"
-
- # If the previous option needs an argument, assign it.
- if test -n "$prev"; then
- case $prev in
- output)
- compile_command="$compile_command @OUTPUT@"
- finalize_command="$finalize_command @OUTPUT@"
- ;;
- esac
-
- case $prev in
- dlfiles|dlprefiles)
- if test "$preload" = no; then
- # Add the symbol object into the linking commands.
- compile_command="$compile_command @SYMFILE@"
- finalize_command="$finalize_command @SYMFILE@"
- preload=yes
- fi
- case $arg in
- *.la | *.lo) ;; # We handle these cases below.
- force)
- if test "$dlself" = no; then
- dlself=needless
- export_dynamic=yes
- fi
- prev=
- continue
- ;;
- self)
- if test "$prev" = dlprefiles; then
- dlself=yes
- elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
- dlself=yes
- else
- dlself=needless
- export_dynamic=yes
- fi
- prev=
- continue
- ;;
- *)
- if test "$prev" = dlfiles; then
- dlfiles="$dlfiles $arg"
- else
- dlprefiles="$dlprefiles $arg"
- fi
- prev=
- continue
- ;;
- esac
- ;;
- expsyms)
- export_symbols="$arg"
- if test ! -f "$arg"; then
- $echo "$modename: symbol file \`$arg' does not exist"
- exit $EXIT_FAILURE
- fi
- prev=
- continue
- ;;
- expsyms_regex)
- export_symbols_regex="$arg"
- prev=
- continue
- ;;
- inst_prefix)
- inst_prefix_dir="$arg"
- prev=
- continue
- ;;
- precious_regex)
- precious_files_regex="$arg"
- prev=
- continue
- ;;
- release)
- release="-$arg"
- prev=
- continue
- ;;
- objectlist)
- if test -f "$arg"; then
- save_arg=$arg
- moreargs=
- for fil in `cat $save_arg`
- do
-# moreargs="$moreargs $fil"
- arg=$fil
- # A libtool-controlled object.
-
- # Check to see that this really is a libtool object.
- if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
- pic_object=
- non_pic_object=
-
- # Read the .lo file
- # If there is no directory component, then add one.
- case $arg in
- */* | *\\*) . $arg ;;
- *) . ./$arg ;;
- esac
-
- if test -z "$pic_object" || \
- test -z "$non_pic_object" ||
- test "$pic_object" = none && \
- test "$non_pic_object" = none; then
- $echo "$modename: cannot find name of object for \`$arg'" 1>&2
- exit $EXIT_FAILURE
- fi
-
- # Extract subdirectory from the argument.
- xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
- if test "X$xdir" = "X$arg"; then
- xdir=
- else
- xdir="$xdir/"
- fi
-
- if test "$pic_object" != none; then
- # Prepend the subdirectory the object is found in.
- pic_object="$xdir$pic_object"
-
- if test "$prev" = dlfiles; then
- if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
- dlfiles="$dlfiles $pic_object"
- prev=
- continue
- else
- # If libtool objects are unsupported, then we need to preload.
- prev=dlprefiles
- fi
- fi
-
- # CHECK ME: I think I busted this. -Ossama
- if test "$prev" = dlprefiles; then
- # Preload the old-style object.
- dlprefiles="$dlprefiles $pic_object"
- prev=
- fi
-
- # A PIC object.
- libobjs="$libobjs $pic_object"
- arg="$pic_object"
- fi
-
- # Non-PIC object.
- if test "$non_pic_object" != none; then
- # Prepend the subdirectory the object is found in.
- non_pic_object="$xdir$non_pic_object"
-
- # A standard non-PIC object
- non_pic_objects="$non_pic_objects $non_pic_object"
- if test -z "$pic_object" || test "$pic_object" = none ; then
- arg="$non_pic_object"
- fi
- else
- # If the PIC object exists, use it instead.
- # $xdir was prepended to $pic_object above.
- non_pic_object="$pic_object"
- non_pic_objects="$non_pic_objects $non_pic_object"
- fi
- else
- # Only an error if not doing a dry-run.
- if test -z "$run"; then
- $echo "$modename: \`$arg' is not a valid libtool object" 1>&2
- exit $EXIT_FAILURE
- else
- # Dry-run case.
-
- # Extract subdirectory from the argument.
- xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
- if test "X$xdir" = "X$arg"; then
- xdir=
- else
- xdir="$xdir/"
- fi
-
- pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`
- non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`
- libobjs="$libobjs $pic_object"
- non_pic_objects="$non_pic_objects $non_pic_object"
- fi
- fi
- done
- else
- $echo "$modename: link input file \`$save_arg' does not exist"
- exit $EXIT_FAILURE
- fi
- arg=$save_arg
- prev=
- continue
- ;;
- rpath | xrpath)
- # We need an absolute path.
- case $arg in
- [\\/]* | [A-Za-z]:[\\/]*) ;;
- *)
- $echo "$modename: only absolute run-paths are allowed" 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
- if test "$prev" = rpath; then
- case "$rpath " in
- *" $arg "*) ;;
- *) rpath="$rpath $arg" ;;
- esac
- else
- case "$xrpath " in
- *" $arg "*) ;;
- *) xrpath="$xrpath $arg" ;;
- esac
- fi
- prev=
- continue
- ;;
- xcompiler)
- compiler_flags="$compiler_flags $qarg"
- prev=
- compile_command="$compile_command $qarg"
- finalize_command="$finalize_command $qarg"
- continue
- ;;
- xlinker)
- linker_flags="$linker_flags $qarg"
- compiler_flags="$compiler_flags $wl$qarg"
- prev=
- compile_command="$compile_command $wl$qarg"
- finalize_command="$finalize_command $wl$qarg"
- continue
- ;;
- xcclinker)
- linker_flags="$linker_flags $qarg"
- compiler_flags="$compiler_flags $qarg"
- prev=
- compile_command="$compile_command $qarg"
- finalize_command="$finalize_command $qarg"
- continue
- ;;
- shrext)
- shrext_cmds="$arg"
- prev=
- continue
- ;;
- darwin_framework|darwin_framework_skip)
- test "$prev" = "darwin_framework" && compiler_flags="$compiler_flags $arg"
- compile_command="$compile_command $arg"
- finalize_command="$finalize_command $arg"
- prev=
- continue
- ;;
- *)
- eval "$prev=\"\$arg\""
- prev=
- continue
- ;;
- esac
- fi # test -n "$prev"
-
- prevarg="$arg"
-
- case $arg in
- -all-static)
- if test -n "$link_static_flag"; then
- compile_command="$compile_command $link_static_flag"
- finalize_command="$finalize_command $link_static_flag"
- fi
- continue
- ;;
-
- -allow-undefined)
- # FIXME: remove this flag sometime in the future.
- $echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2
- continue
- ;;
-
- -avoid-version)
- avoid_version=yes
- continue
- ;;
-
- -dlopen)
- prev=dlfiles
- continue
- ;;
-
- -dlpreopen)
- prev=dlprefiles
- continue
- ;;
-
- -export-dynamic)
- export_dynamic=yes
- continue
- ;;
-
- -export-symbols | -export-symbols-regex)
- if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
- $echo "$modename: more than one -exported-symbols argument is not allowed"
- exit $EXIT_FAILURE
- fi
- if test "X$arg" = "X-export-symbols"; then
- prev=expsyms
- else
- prev=expsyms_regex
- fi
- continue
- ;;
-
- -framework|-arch|-isysroot)
- case " $CC " in
- *" ${arg} ${1} "* | *" ${arg} ${1} "*)
- prev=darwin_framework_skip ;;
- *) compiler_flags="$compiler_flags $arg"
- prev=darwin_framework ;;
- esac
- compile_command="$compile_command $arg"
- finalize_command="$finalize_command $arg"
- continue
- ;;
-
- -inst-prefix-dir)
- prev=inst_prefix
- continue
- ;;
-
- # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
- # so, if we see these flags be careful not to treat them like -L
- -L[A-Z][A-Z]*:*)
- case $with_gcc/$host in
- no/*-*-irix* | /*-*-irix*)
- compile_command="$compile_command $arg"
- finalize_command="$finalize_command $arg"
- ;;
- esac
- continue
- ;;
-
- -L*)
- dir=`$echo "X$arg" | $Xsed -e 's/^-L//'`
- # We need an absolute path.
- case $dir in
- [\\/]* | [A-Za-z]:[\\/]*) ;;
- *)
- absdir=`cd "$dir" && pwd`
- if test -z "$absdir"; then
- $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2
- absdir="$dir"
- notinst_path="$notinst_path $dir"
- fi
- dir="$absdir"
- ;;
- esac
- case "$deplibs " in
- *" -L$dir "*) ;;
- *)
- deplibs="$deplibs -L$dir"
- lib_search_path="$lib_search_path $dir"
- ;;
- esac
- case $host in
- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
- testbindir=`$echo "X$dir" | $Xsed -e 's*/lib$*/bin*'`
- case :$dllsearchpath: in
- *":$dir:"*) ;;
- *) dllsearchpath="$dllsearchpath:$dir";;
- esac
- case :$dllsearchpath: in
- *":$testbindir:"*) ;;
- *) dllsearchpath="$dllsearchpath:$testbindir";;
- esac
- ;;
- esac
- continue
- ;;
-
- -l*)
- if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
- case $host in
- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos*)
- # These systems don't actually have a C or math library (as such)
- continue
- ;;
- *-*-os2*)
- # These systems don't actually have a C library (as such)
- test "X$arg" = "X-lc" && continue
- ;;
- *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
- # Do not include libc due to us having libc/libc_r.
- test "X$arg" = "X-lc" && continue
- ;;
- *-*-rhapsody* | *-*-darwin1.[012])
- # Rhapsody C and math libraries are in the System framework
- deplibs="$deplibs -framework System"
- continue
- ;;
- *-*-sco3.2v5* | *-*-sco5v6*)
- # Causes problems with __ctype
- test "X$arg" = "X-lc" && continue
- ;;
- *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
- # Compiler inserts libc in the correct place for threads to work
- test "X$arg" = "X-lc" && continue
- ;;
- esac
- elif test "X$arg" = "X-lc_r"; then
- case $host in
- *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
- # Do not include libc_r directly, use -pthread flag.
- continue
- ;;
- esac
- fi
- deplibs="$deplibs $arg"
- continue
- ;;
-
- # Tru64 UNIX uses -model [arg] to determine the layout of C++
- # classes, name mangling, and exception handling.
- -model)
- compile_command="$compile_command $arg"
- compiler_flags="$compiler_flags $arg"
- finalize_command="$finalize_command $arg"
- prev=xcompiler
- continue
- ;;
-
- -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
- compiler_flags="$compiler_flags $arg"
- compile_command="$compile_command $arg"
- finalize_command="$finalize_command $arg"
- deplibs="$deplibs $arg"
- continue
- ;;
-
- -module)
- module=yes
- continue
- ;;
-
- # -64, -mips[0-9] enable 64-bit mode on the SGI compiler
- # -r[0-9][0-9]* specifies the processor on the SGI compiler
- # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler
- # +DA*, +DD* enable 64-bit mode on the HP compiler
- # -q* pass through compiler args for the IBM compiler
- # -m* pass through architecture-specific compiler args for GCC
- # -m*, -t[45]*, -txscale* pass through architecture-specific
- # compiler args for GCC
- # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC
- # -F/path gives path to uninstalled frameworks, gcc on darwin
- # @file GCC response files
- -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
- -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*)
-
- # Unknown arguments in both finalize_command and compile_command need
- # to be aesthetically quoted because they are evaled later.
- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
- case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- arg="\"$arg\""
- ;;
- esac
- compile_command="$compile_command $arg"
- finalize_command="$finalize_command $arg"
- compiler_flags="$compiler_flags $arg"
- continue
- ;;
-
- -shrext)
- prev=shrext
- continue
- ;;
-
- -no-fast-install)
- fast_install=no
- continue
- ;;
-
- -no-install)
- case $host in
- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin*)
- # The PATH hackery in wrapper scripts is required on Windows
- # and Darwin in order for the loader to find any dlls it needs.
- $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2
- $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2
- fast_install=no
- ;;
- *) no_install=yes ;;
- esac
- continue
- ;;
-
- -no-undefined)
- allow_undefined=no
- continue
- ;;
-
- -objectlist)
- prev=objectlist
- continue
- ;;
-
- -o) prev=output ;;
-
- -precious-files-regex)
- prev=precious_regex
- continue
- ;;
-
- -release)
- prev=release
- continue
- ;;
-
- -rpath)
- prev=rpath
- continue
- ;;
-
- -R)
- prev=xrpath
- continue
- ;;
-
- -R*)
- dir=`$echo "X$arg" | $Xsed -e 's/^-R//'`
- # We need an absolute path.
- case $dir in
- [\\/]* | [A-Za-z]:[\\/]*) ;;
- *)
- $echo "$modename: only absolute run-paths are allowed" 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
- case "$xrpath " in
- *" $dir "*) ;;
- *) xrpath="$xrpath $dir" ;;
- esac
- continue
- ;;
-
- -static | -static-libtool-libs)
- # The effects of -static are defined in a previous loop.
- # We used to do the same as -all-static on platforms that
- # didn't have a PIC flag, but the assumption that the effects
- # would be equivalent was wrong. It would break on at least
- # Digital Unix and AIX.
- continue
- ;;
-
- -thread-safe)
- thread_safe=yes
- continue
- ;;
-
- -version-info)
- prev=vinfo
- continue
- ;;
- -version-number)
- prev=vinfo
- vinfo_number=yes
- continue
- ;;
-
- -Wc,*)
- args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'`
- arg=
- save_ifs="$IFS"; IFS=','
- for flag in $args; do
- IFS="$save_ifs"
- case $flag in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- flag="\"$flag\""
- ;;
- esac
- arg="$arg $wl$flag"
- compiler_flags="$compiler_flags $flag"
- done
- IFS="$save_ifs"
- arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
- ;;
-
- -Wl,*)
- args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'`
- arg=
- save_ifs="$IFS"; IFS=','
- for flag in $args; do
- IFS="$save_ifs"
- case $flag in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- flag="\"$flag\""
- ;;
- esac
- arg="$arg $wl$flag"
- compiler_flags="$compiler_flags $wl$flag"
- linker_flags="$linker_flags $flag"
- done
- IFS="$save_ifs"
- arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
- ;;
-
- -Xcompiler)
- prev=xcompiler
- continue
- ;;
-
- -Xlinker)
- prev=xlinker
- continue
- ;;
-
- -XCClinker)
- prev=xcclinker
- continue
- ;;
-
- # Some other compiler flag.
- -* | +*)
- # Unknown arguments in both finalize_command and compile_command need
- # to be aesthetically quoted because they are evaled later.
- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
- case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- arg="\"$arg\""
- ;;
- esac
- ;;
-
- *.$objext)
- # A standard object.
- objs="$objs $arg"
- ;;
-
- *.lo)
- # A libtool-controlled object.
-
- # Check to see that this really is a libtool object.
- if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
- pic_object=
- non_pic_object=
-
- # Read the .lo file
- # If there is no directory component, then add one.
- case $arg in
- */* | *\\*) . $arg ;;
- *) . ./$arg ;;
- esac
-
- if test -z "$pic_object" || \
- test -z "$non_pic_object" ||
- test "$pic_object" = none && \
- test "$non_pic_object" = none; then
- $echo "$modename: cannot find name of object for \`$arg'" 1>&2
- exit $EXIT_FAILURE
- fi
-
- # Extract subdirectory from the argument.
- xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
- if test "X$xdir" = "X$arg"; then
- xdir=
- else
- xdir="$xdir/"
- fi
-
- if test "$pic_object" != none; then
- # Prepend the subdirectory the object is found in.
- pic_object="$xdir$pic_object"
-
- if test "$prev" = dlfiles; then
- if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
- dlfiles="$dlfiles $pic_object"
- prev=
- continue
- else
- # If libtool objects are unsupported, then we need to preload.
- prev=dlprefiles
- fi
- fi
-
- # CHECK ME: I think I busted this. -Ossama
- if test "$prev" = dlprefiles; then
- # Preload the old-style object.
- dlprefiles="$dlprefiles $pic_object"
- prev=
- fi
-
- # A PIC object.
- libobjs="$libobjs $pic_object"
- arg="$pic_object"
- fi
-
- # Non-PIC object.
- if test "$non_pic_object" != none; then
- # Prepend the subdirectory the object is found in.
- non_pic_object="$xdir$non_pic_object"
-
- # A standard non-PIC object
- non_pic_objects="$non_pic_objects $non_pic_object"
- if test -z "$pic_object" || test "$pic_object" = none ; then
- arg="$non_pic_object"
- fi
- else
- # If the PIC object exists, use it instead.
- # $xdir was prepended to $pic_object above.
- non_pic_object="$pic_object"
- non_pic_objects="$non_pic_objects $non_pic_object"
- fi
- else
- # Only an error if not doing a dry-run.
- if test -z "$run"; then
- $echo "$modename: \`$arg' is not a valid libtool object" 1>&2
- exit $EXIT_FAILURE
- else
- # Dry-run case.
-
- # Extract subdirectory from the argument.
- xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
- if test "X$xdir" = "X$arg"; then
- xdir=
- else
- xdir="$xdir/"
- fi
-
- pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`
- non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`
- libobjs="$libobjs $pic_object"
- non_pic_objects="$non_pic_objects $non_pic_object"
- fi
- fi
- ;;
-
- *.$libext)
- # An archive.
- deplibs="$deplibs $arg"
- old_deplibs="$old_deplibs $arg"
- continue
- ;;
-
- *.la)
- # A libtool-controlled library.
-
- if test "$prev" = dlfiles; then
- # This library was specified with -dlopen.
- dlfiles="$dlfiles $arg"
- prev=
- elif test "$prev" = dlprefiles; then
- # The library was specified with -dlpreopen.
- dlprefiles="$dlprefiles $arg"
- prev=
- else
- deplibs="$deplibs $arg"
- fi
- continue
- ;;
-
- # Some other compiler argument.
- *)
- # Unknown arguments in both finalize_command and compile_command need
- # to be aesthetically quoted because they are evaled later.
- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
- case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- arg="\"$arg\""
- ;;
- esac
- ;;
- esac # arg
-
- # Now actually substitute the argument into the commands.
- if test -n "$arg"; then
- compile_command="$compile_command $arg"
- finalize_command="$finalize_command $arg"
- fi
- done # argument parsing loop
-
- if test -n "$prev"; then
- $echo "$modename: the \`$prevarg' option requires an argument" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
-
- if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
- eval arg=\"$export_dynamic_flag_spec\"
- compile_command="$compile_command $arg"
- finalize_command="$finalize_command $arg"
- fi
-
- oldlibs=
- # calculate the name of the file, without its directory
- outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'`
- libobjs_save="$libobjs"
-
- if test -n "$shlibpath_var"; then
- # get the directories listed in $shlibpath_var
- eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
- else
- shlib_search_path=
- fi
- eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
- eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
-
- output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'`
- if test "X$output_objdir" = "X$output"; then
- output_objdir="$objdir"
- else
- output_objdir="$output_objdir/$objdir"
- fi
- # Create the object directory.
- if test ! -d "$output_objdir"; then
- $show "$mkdir $output_objdir"
- $run $mkdir $output_objdir
- exit_status=$?
- if test "$exit_status" -ne 0 && test ! -d "$output_objdir"; then
- exit $exit_status
- fi
- fi
-
- # Determine the type of output
- case $output in
- "")
- $echo "$modename: you must specify an output file" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- ;;
- *.$libext) linkmode=oldlib ;;
- *.lo | *.$objext) linkmode=obj ;;
- *.la) linkmode=lib ;;
- *) linkmode=prog ;; # Anything else should be a program.
- esac
-
- case $host in
- *cygwin* | *mingw* | *pw32*)
- # don't eliminate duplications in $postdeps and $predeps
- duplicate_compiler_generated_deps=yes
- ;;
- *)
- duplicate_compiler_generated_deps=$duplicate_deps
- ;;
- esac
- specialdeplibs=
-
- libs=
- # Find all interdependent deplibs by searching for libraries
- # that are linked more than once (e.g. -la -lb -la)
- for deplib in $deplibs; do
- if test "X$duplicate_deps" = "Xyes" ; then
- case "$libs " in
- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
- esac
- fi
- libs="$libs $deplib"
- done
-
- if test "$linkmode" = lib; then
- libs="$predeps $libs $compiler_lib_search_path $postdeps"
-
- # Compute libraries that are listed more than once in $predeps
- # $postdeps and mark them as special (i.e., whose duplicates are
- # not to be eliminated).
- pre_post_deps=
- if test "X$duplicate_compiler_generated_deps" = "Xyes" ; then
- for pre_post_dep in $predeps $postdeps; do
- case "$pre_post_deps " in
- *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;;
- esac
- pre_post_deps="$pre_post_deps $pre_post_dep"
- done
- fi
- pre_post_deps=
- fi
-
- deplibs=
- newdependency_libs=
- newlib_search_path=
- need_relink=no # whether we're linking any uninstalled libtool libraries
- notinst_deplibs= # not-installed libtool libraries
- case $linkmode in
- lib)
- passes="conv link"
- for file in $dlfiles $dlprefiles; do
- case $file in
- *.la) ;;
- *)
- $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
- done
- ;;
- prog)
- compile_deplibs=
- finalize_deplibs=
- alldeplibs=no
- newdlfiles=
- newdlprefiles=
- passes="conv scan dlopen dlpreopen link"
- ;;
- *) passes="conv"
- ;;
- esac
- for pass in $passes; do
- if test "$linkmode,$pass" = "lib,link" ||
- test "$linkmode,$pass" = "prog,scan"; then
- libs="$deplibs"
- deplibs=
- fi
- if test "$linkmode" = prog; then
- case $pass in
- dlopen) libs="$dlfiles" ;;
- dlpreopen) libs="$dlprefiles" ;;
- link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
- esac
- fi
- if test "$pass" = dlopen; then
- # Collect dlpreopened libraries
- save_deplibs="$deplibs"
- deplibs=
- fi
- for deplib in $libs; do
- lib=
- found=no
- case $deplib in
- -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
- if test "$linkmode,$pass" = "prog,link"; then
- compile_deplibs="$deplib $compile_deplibs"
- finalize_deplibs="$deplib $finalize_deplibs"
- else
- compiler_flags="$compiler_flags $deplib"
- fi
-
- case $linkmode in
- lib)
- deplibs="$deplib $deplibs"
- test "$pass" = conv && continue
- newdependency_libs="$deplib $newdependency_libs"
- ;;
- prog)
- if test "$pass" = conv; then
- deplibs="$deplib $deplibs"
- continue
- fi
- if test "$pass" = scan; then
- deplibs="$deplib $deplibs"
- else
- compile_deplibs="$deplib $compile_deplibs"
- finalize_deplibs="$deplib $finalize_deplibs"
- fi
- ;;
- *)
- ;;
- esac # linkmode
-
- continue
- ;;
- -l*)
- if test "$linkmode" != lib && test "$linkmode" != prog; then
- $echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2
- continue
- fi
- name=`$echo "X$deplib" | $Xsed -e 's/^-l//'`
- for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do
- for search_ext in .la $std_shrext .so .a; do
- # Search the libtool library
- lib="$searchdir/lib${name}${search_ext}"
- if test -f "$lib"; then
- if test "$search_ext" = ".la"; then
- found=yes
- else
- found=no
- fi
- break 2
- fi
- done
- done
- if test "$found" != yes; then
- # deplib doesn't seem to be a libtool library
- if test "$linkmode,$pass" = "prog,link"; then
- compile_deplibs="$deplib $compile_deplibs"
- finalize_deplibs="$deplib $finalize_deplibs"
- else
- deplibs="$deplib $deplibs"
- test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
- fi
- continue
- else # deplib is a libtool library
- # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
- # We need to do some special things here, and not later.
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
- case " $predeps $postdeps " in
- *" $deplib "*)
- if (${SED} -e '2q' $lib |
- grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
- library_names=
- old_library=
- case $lib in
- */* | *\\*) . $lib ;;
- *) . ./$lib ;;
- esac
- for l in $old_library $library_names; do
- ll="$l"
- done
- if test "X$ll" = "X$old_library" ; then # only static version available
- found=no
- ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
- test "X$ladir" = "X$lib" && ladir="."
- lib=$ladir/$old_library
- if test "$linkmode,$pass" = "prog,link"; then
- compile_deplibs="$deplib $compile_deplibs"
- finalize_deplibs="$deplib $finalize_deplibs"
- else
- deplibs="$deplib $deplibs"
- test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
- fi
- continue
- fi
- fi
- ;;
- *) ;;
- esac
- fi
- fi
- ;; # -l
- -L*)
- case $linkmode in
- lib)
- deplibs="$deplib $deplibs"
- test "$pass" = conv && continue
- newdependency_libs="$deplib $newdependency_libs"
- newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
- ;;
- prog)
- if test "$pass" = conv; then
- deplibs="$deplib $deplibs"
- continue
- fi
- if test "$pass" = scan; then
- deplibs="$deplib $deplibs"
- else
- compile_deplibs="$deplib $compile_deplibs"
- finalize_deplibs="$deplib $finalize_deplibs"
- fi
- newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
- ;;
- *)
- $echo "$modename: warning: \`-L' is ignored for archives/objects" 1>&2
- ;;
- esac # linkmode
- continue
- ;; # -L
- -R*)
- if test "$pass" = link; then
- dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'`
- # Make sure the xrpath contains only unique directories.
- case "$xrpath " in
- *" $dir "*) ;;
- *) xrpath="$xrpath $dir" ;;
- esac
- fi
- deplibs="$deplib $deplibs"
- continue
- ;;
- *.la) lib="$deplib" ;;
- *.$libext)
- if test "$pass" = conv; then
- deplibs="$deplib $deplibs"
- continue
- fi
- case $linkmode in
- lib)
- valid_a_lib=no
- case $deplibs_check_method in
- match_pattern*)
- set dummy $deplibs_check_method
- match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
- if eval $echo \"$deplib\" 2>/dev/null \
- | $SED 10q \
- | $EGREP "$match_pattern_regex" > /dev/null; then
- valid_a_lib=yes
- fi
- ;;
- pass_all)
- valid_a_lib=yes
- ;;
- esac
- if test "$valid_a_lib" != yes; then
- $echo
- $echo "*** Warning: Trying to link with static lib archive $deplib."
- $echo "*** I have the capability to make that library automatically link in when"
- $echo "*** you link to this library. But I can only do this if you have a"
- $echo "*** shared version of the library, which you do not appear to have"
- $echo "*** because the file extensions .$libext of this argument makes me believe"
- $echo "*** that it is just a static archive that I should not used here."
- else
- $echo
- $echo "*** Warning: Linking the shared library $output against the"
- $echo "*** static library $deplib is not portable!"
- deplibs="$deplib $deplibs"
- fi
- continue
- ;;
- prog)
- if test "$pass" != link; then
- deplibs="$deplib $deplibs"
- else
- compile_deplibs="$deplib $compile_deplibs"
- finalize_deplibs="$deplib $finalize_deplibs"
- fi
- continue
- ;;
- esac # linkmode
- ;; # *.$libext
- *.lo | *.$objext)
- if test "$pass" = conv; then
- deplibs="$deplib $deplibs"
- elif test "$linkmode" = prog; then
- if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
- # If there is no dlopen support or we're linking statically,
- # we need to preload.
- newdlprefiles="$newdlprefiles $deplib"
- compile_deplibs="$deplib $compile_deplibs"
- finalize_deplibs="$deplib $finalize_deplibs"
- else
- newdlfiles="$newdlfiles $deplib"
- fi
- fi
- continue
- ;;
- %DEPLIBS%)
- alldeplibs=yes
- continue
- ;;
- esac # case $deplib
- if test "$found" = yes || test -f "$lib"; then :
- else
- $echo "$modename: cannot find the library \`$lib' or unhandled argument \`$deplib'" 1>&2
- exit $EXIT_FAILURE
- fi
-
- # Check to see that this really is a libtool archive.
- if (${SED} -e '2q' $lib | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
- else
- $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
- exit $EXIT_FAILURE
- fi
-
- ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
- test "X$ladir" = "X$lib" && ladir="."
-
- dlname=
- dlopen=
- dlpreopen=
- libdir=
- library_names=
- old_library=
- # If the library was installed with an old release of libtool,
- # it will not redefine variables installed, or shouldnotlink
- installed=yes
- shouldnotlink=no
- avoidtemprpath=
-
-
- # Read the .la file
- case $lib in
- */* | *\\*) . $lib ;;
- *) . ./$lib ;;
- esac
-
- if test "$linkmode,$pass" = "lib,link" ||
- test "$linkmode,$pass" = "prog,scan" ||
- { test "$linkmode" != prog && test "$linkmode" != lib; }; then
- test -n "$dlopen" && dlfiles="$dlfiles $dlopen"
- test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen"
- fi
-
- if test "$pass" = conv; then
- # Only check for convenience libraries
- deplibs="$lib $deplibs"
- if test -z "$libdir"; then
- if test -z "$old_library"; then
- $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
- exit $EXIT_FAILURE
- fi
- # It is a libtool convenience library, so add in its objects.
- convenience="$convenience $ladir/$objdir/$old_library"
- old_convenience="$old_convenience $ladir/$objdir/$old_library"
- tmp_libs=
- for deplib in $dependency_libs; do
- deplibs="$deplib $deplibs"
- if test "X$duplicate_deps" = "Xyes" ; then
- case "$tmp_libs " in
- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
- esac
- fi
- tmp_libs="$tmp_libs $deplib"
- done
- elif test "$linkmode" != prog && test "$linkmode" != lib; then
- $echo "$modename: \`$lib' is not a convenience library" 1>&2
- exit $EXIT_FAILURE
- fi
- continue
- fi # $pass = conv
-
-
- # Get the name of the library we link against.
- linklib=
- for l in $old_library $library_names; do
- linklib="$l"
- done
- if test -z "$linklib"; then
- $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
- exit $EXIT_FAILURE
- fi
-
- # This library was specified with -dlopen.
- if test "$pass" = dlopen; then
- if test -z "$libdir"; then
- $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2
- exit $EXIT_FAILURE
- fi
- if test -z "$dlname" ||
- test "$dlopen_support" != yes ||
- test "$build_libtool_libs" = no; then
- # If there is no dlname, no dlopen support or we're linking
- # statically, we need to preload. We also need to preload any
- # dependent libraries so libltdl's deplib preloader doesn't
- # bomb out in the load deplibs phase.
- dlprefiles="$dlprefiles $lib $dependency_libs"
- else
- newdlfiles="$newdlfiles $lib"
- fi
- continue
- fi # $pass = dlopen
-
- # We need an absolute path.
- case $ladir in
- [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
- *)
- abs_ladir=`cd "$ladir" && pwd`
- if test -z "$abs_ladir"; then
- $echo "$modename: warning: cannot determine absolute directory name of \`$ladir'" 1>&2
- $echo "$modename: passing it literally to the linker, although it might fail" 1>&2
- abs_ladir="$ladir"
- fi
- ;;
- esac
- laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
-
- # Find the relevant object directory and library name.
- if test "X$installed" = Xyes; then
- if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
- $echo "$modename: warning: library \`$lib' was moved." 1>&2
- dir="$ladir"
- absdir="$abs_ladir"
- libdir="$abs_ladir"
- else
- dir="$libdir"
- absdir="$libdir"
- fi
- test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
- else
- if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
- dir="$ladir"
- absdir="$abs_ladir"
- # Remove this search path later
- notinst_path="$notinst_path $abs_ladir"
- else
- dir="$ladir/$objdir"
- absdir="$abs_ladir/$objdir"
- # Remove this search path later
- notinst_path="$notinst_path $abs_ladir"
- fi
- fi # $installed = yes
- name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
-
- # This library was specified with -dlpreopen.
- if test "$pass" = dlpreopen; then
- if test -z "$libdir"; then
- $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2
- exit $EXIT_FAILURE
- fi
- # Prefer using a static library (so that no silly _DYNAMIC symbols
- # are required to link).
- if test -n "$old_library"; then
- newdlprefiles="$newdlprefiles $dir/$old_library"
- # Otherwise, use the dlname, so that lt_dlopen finds it.
- elif test -n "$dlname"; then
- newdlprefiles="$newdlprefiles $dir/$dlname"
- else
- newdlprefiles="$newdlprefiles $dir/$linklib"
- fi
- fi # $pass = dlpreopen
-
- if test -z "$libdir"; then
- # Link the convenience library
- if test "$linkmode" = lib; then
- deplibs="$dir/$old_library $deplibs"
- elif test "$linkmode,$pass" = "prog,link"; then
- compile_deplibs="$dir/$old_library $compile_deplibs"
- finalize_deplibs="$dir/$old_library $finalize_deplibs"
- else
- deplibs="$lib $deplibs" # used for prog,scan pass
- fi
- continue
- fi
-
-
- if test "$linkmode" = prog && test "$pass" != link; then
- newlib_search_path="$newlib_search_path $ladir"
- deplibs="$lib $deplibs"
-
- linkalldeplibs=no
- if test "$link_all_deplibs" != no || test -z "$library_names" ||
- test "$build_libtool_libs" = no; then
- linkalldeplibs=yes
- fi
-
- tmp_libs=
- for deplib in $dependency_libs; do
- case $deplib in
- -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test
- esac
- # Need to link against all dependency_libs?
- if test "$linkalldeplibs" = yes; then
- deplibs="$deplib $deplibs"
- else
- # Need to hardcode shared library paths
- # or/and link against static libraries
- newdependency_libs="$deplib $newdependency_libs"
- fi
- if test "X$duplicate_deps" = "Xyes" ; then
- case "$tmp_libs " in
- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
- esac
- fi
- tmp_libs="$tmp_libs $deplib"
- done # for deplib
- continue
- fi # $linkmode = prog...
-
- if test "$linkmode,$pass" = "prog,link"; then
- if test -n "$library_names" &&
- { { test "$prefer_static_libs" = no ||
- test "$prefer_static_libs,$installed" = "built,yes"; } ||
- test -z "$old_library"; }; then
- # We need to hardcode the library path
- if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
- # Make sure the rpath contains only unique directories.
- case "$temp_rpath " in
- *" $dir "*) ;;
- *" $absdir "*) ;;
- *) temp_rpath="$temp_rpath $absdir" ;;
- esac
- fi
-
- # Hardcode the library path.
- # Skip directories that are in the system default run-time
- # search path.
- case " $sys_lib_dlsearch_path " in
- *" $absdir "*) ;;
- *)
- case "$compile_rpath " in
- *" $absdir "*) ;;
- *) compile_rpath="$compile_rpath $absdir"
- esac
- ;;
- esac
- case " $sys_lib_dlsearch_path " in
- *" $libdir "*) ;;
- *)
- case "$finalize_rpath " in
- *" $libdir "*) ;;
- *) finalize_rpath="$finalize_rpath $libdir"
- esac
- ;;
- esac
- fi # $linkmode,$pass = prog,link...
-
- if test "$alldeplibs" = yes &&
- { test "$deplibs_check_method" = pass_all ||
- { test "$build_libtool_libs" = yes &&
- test -n "$library_names"; }; }; then
- # We only need to search for static libraries
- continue
- fi
- fi
-
- link_static=no # Whether the deplib will be linked statically
- use_static_libs=$prefer_static_libs
- if test "$use_static_libs" = built && test "$installed" = yes ; then
- use_static_libs=no
- fi
- if test -n "$library_names" &&
- { test "$use_static_libs" = no || test -z "$old_library"; }; then
- if test "$installed" = no; then
- notinst_deplibs="$notinst_deplibs $lib"
- need_relink=yes
- fi
- # This is a shared library
-
- # Warn about portability, can't link against -module's on
- # some systems (darwin)
- if test "$shouldnotlink" = yes && test "$pass" = link ; then
- $echo
- if test "$linkmode" = prog; then
- $echo "*** Warning: Linking the executable $output against the loadable module"
- else
- $echo "*** Warning: Linking the shared library $output against the loadable module"
- fi
- $echo "*** $linklib is not portable!"
- fi
- if test "$linkmode" = lib &&
- test "$hardcode_into_libs" = yes; then
- # Hardcode the library path.
- # Skip directories that are in the system default run-time
- # search path.
- case " $sys_lib_dlsearch_path " in
- *" $absdir "*) ;;
- *)
- case "$compile_rpath " in
- *" $absdir "*) ;;
- *) compile_rpath="$compile_rpath $absdir"
- esac
- ;;
- esac
- case " $sys_lib_dlsearch_path " in
- *" $libdir "*) ;;
- *)
- case "$finalize_rpath " in
- *" $libdir "*) ;;
- *) finalize_rpath="$finalize_rpath $libdir"
- esac
- ;;
- esac
- fi
-
- if test -n "$old_archive_from_expsyms_cmds"; then
- # figure out the soname
- set dummy $library_names
- realname="$2"
- shift; shift
- libname=`eval \\$echo \"$libname_spec\"`
- # use dlname if we got it. it's perfectly good, no?
- if test -n "$dlname"; then
- soname="$dlname"
- elif test -n "$soname_spec"; then
- # bleh windows
- case $host in
- *cygwin* | mingw*)
- major=`expr $current - $age`
- versuffix="-$major"
- ;;
- esac
- eval soname=\"$soname_spec\"
- else
- soname="$realname"
- fi
-
- # Make a new name for the extract_expsyms_cmds to use
- soroot="$soname"
- soname=`$echo $soroot | ${SED} -e 's/^.*\///'`
- newlib="libimp-`$echo $soname | ${SED} 's/^lib//;s/\.dll$//'`.a"
-
- # If the library has no export list, then create one now
- if test -f "$output_objdir/$soname-def"; then :
- else
- $show "extracting exported symbol list from \`$soname'"
- save_ifs="$IFS"; IFS='~'
- cmds=$extract_expsyms_cmds
- for cmd in $cmds; do
- IFS="$save_ifs"
- eval cmd=\"$cmd\"
- $show "$cmd"
- $run eval "$cmd" || exit $?
- done
- IFS="$save_ifs"
- fi
-
- # Create $newlib
- if test -f "$output_objdir/$newlib"; then :; else
- $show "generating import library for \`$soname'"
- save_ifs="$IFS"; IFS='~'
- cmds=$old_archive_from_expsyms_cmds
- for cmd in $cmds; do
- IFS="$save_ifs"
- eval cmd=\"$cmd\"
- $show "$cmd"
- $run eval "$cmd" || exit $?
- done
- IFS="$save_ifs"
- fi
- # make sure the library variables are pointing to the new library
- dir=$output_objdir
- linklib=$newlib
- fi # test -n "$old_archive_from_expsyms_cmds"
-
- if test "$linkmode" = prog || test "$mode" != relink; then
- add_shlibpath=
- add_dir=
- add=
- lib_linked=yes
- case $hardcode_action in
- immediate | unsupported)
- if test "$hardcode_direct" = no; then
- add="$dir/$linklib"
- case $host in
- *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;;
- *-*-sysv4*uw2*) add_dir="-L$dir" ;;
- *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
- *-*-unixware7*) add_dir="-L$dir" ;;
- *-*-darwin* )
- # if the lib is a module then we can not link against
- # it, someone is ignoring the new warnings I added
- if /usr/bin/file -L $add 2> /dev/null |
- $EGREP ": [^:]* bundle" >/dev/null ; then
- $echo "** Warning, lib $linklib is a module, not a shared library"
- if test -z "$old_library" ; then
- $echo
- $echo "** And there doesn't seem to be a static archive available"
- $echo "** The link will probably fail, sorry"
- else
- add="$dir/$old_library"
- fi
- fi
- esac
- elif test "$hardcode_minus_L" = no; then
- case $host in
- *-*-sunos*) add_shlibpath="$dir" ;;
- esac
- add_dir="-L$dir"
- add="-l$name"
- elif test "$hardcode_shlibpath_var" = no; then
- add_shlibpath="$dir"
- add="-l$name"
- else
- lib_linked=no
- fi
- ;;
- relink)
- if test "$hardcode_direct" = yes; then
- add="$dir/$linklib"
- elif test "$hardcode_minus_L" = yes; then
- add_dir="-L$dir"
- # Try looking first in the location we're being installed to.
- if test -n "$inst_prefix_dir"; then
- case $libdir in
- [\\/]*)
- add_dir="$add_dir -L$inst_prefix_dir$libdir"
- ;;
- esac
- fi
- add="-l$name"
- elif test "$hardcode_shlibpath_var" = yes; then
- add_shlibpath="$dir"
- add="-l$name"
- else
- lib_linked=no
- fi
- ;;
- *) lib_linked=no ;;
- esac
-
- if test "$lib_linked" != yes; then
- $echo "$modename: configuration error: unsupported hardcode properties"
- exit $EXIT_FAILURE
- fi
-
- if test -n "$add_shlibpath"; then
- case :$compile_shlibpath: in
- *":$add_shlibpath:"*) ;;
- *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;;
- esac
- fi
- if test "$linkmode" = prog; then
- test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
- test -n "$add" && compile_deplibs="$add $compile_deplibs"
- else
- test -n "$add_dir" && deplibs="$add_dir $deplibs"
- test -n "$add" && deplibs="$add $deplibs"
- if test "$hardcode_direct" != yes && \
- test "$hardcode_minus_L" != yes && \
- test "$hardcode_shlibpath_var" = yes; then
- case :$finalize_shlibpath: in
- *":$libdir:"*) ;;
- *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
- esac
- fi
- fi
- fi
-
- if test "$linkmode" = prog || test "$mode" = relink; then
- add_shlibpath=
- add_dir=
- add=
- # Finalize command for both is simple: just hardcode it.
- if test "$hardcode_direct" = yes; then
- add="$libdir/$linklib"
- elif test "$hardcode_minus_L" = yes; then
- add_dir="-L$libdir"
- add="-l$name"
- elif test "$hardcode_shlibpath_var" = yes; then
- case :$finalize_shlibpath: in
- *":$libdir:"*) ;;
- *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
- esac
- add="-l$name"
- elif test "$hardcode_automatic" = yes; then
- if test -n "$inst_prefix_dir" &&
- test -f "$inst_prefix_dir$libdir/$linklib" ; then
- add="$inst_prefix_dir$libdir/$linklib"
- else
- add="$libdir/$linklib"
- fi
- else
- # We cannot seem to hardcode it, guess we'll fake it.
- add_dir="-L$libdir"
- # Try looking first in the location we're being installed to.
- if test -n "$inst_prefix_dir"; then
- case $libdir in
- [\\/]*)
- add_dir="$add_dir -L$inst_prefix_dir$libdir"
- ;;
- esac
- fi
- add="-l$name"
- fi
-
- if test "$linkmode" = prog; then
- test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
- test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
- else
- test -n "$add_dir" && deplibs="$add_dir $deplibs"
- test -n "$add" && deplibs="$add $deplibs"
- fi
- fi
- elif test "$linkmode" = prog; then
- # Here we assume that one of hardcode_direct or hardcode_minus_L
- # is not unsupported. This is valid on all known static and
- # shared platforms.
- if test "$hardcode_direct" != unsupported; then
- test -n "$old_library" && linklib="$old_library"
- compile_deplibs="$dir/$linklib $compile_deplibs"
- finalize_deplibs="$dir/$linklib $finalize_deplibs"
- else
- compile_deplibs="-l$name -L$dir $compile_deplibs"
- finalize_deplibs="-l$name -L$dir $finalize_deplibs"
- fi
- elif test "$build_libtool_libs" = yes; then
- # Not a shared library
- if test "$deplibs_check_method" != pass_all; then
- # We're trying link a shared library against a static one
- # but the system doesn't support it.
-
- # Just print a warning and add the library to dependency_libs so
- # that the program can be linked against the static library.
- $echo
- $echo "*** Warning: This system can not link to static lib archive $lib."
- $echo "*** I have the capability to make that library automatically link in when"
- $echo "*** you link to this library. But I can only do this if you have a"
- $echo "*** shared version of the library, which you do not appear to have."
- if test "$module" = yes; then
- $echo "*** But as you try to build a module library, libtool will still create "
- $echo "*** a static module, that should work as long as the dlopening application"
- $echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
- if test -z "$global_symbol_pipe"; then
- $echo
- $echo "*** However, this would only work if libtool was able to extract symbol"
- $echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
- $echo "*** not find such a program. So, this module is probably useless."
- $echo "*** \`nm' from GNU binutils and a full rebuild may help."
- fi
- if test "$build_old_libs" = no; then
- build_libtool_libs=module
- build_old_libs=yes
- else
- build_libtool_libs=no
- fi
- fi
- else
- deplibs="$dir/$old_library $deplibs"
- link_static=yes
- fi
- fi # link shared/static library?
-
- if test "$linkmode" = lib; then
- if test -n "$dependency_libs" &&
- { test "$hardcode_into_libs" != yes ||
- test "$build_old_libs" = yes ||
- test "$link_static" = yes; }; then
- # Extract -R from dependency_libs
- temp_deplibs=
- for libdir in $dependency_libs; do
- case $libdir in
- -R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'`
- case " $xrpath " in
- *" $temp_xrpath "*) ;;
- *) xrpath="$xrpath $temp_xrpath";;
- esac;;
- *) temp_deplibs="$temp_deplibs $libdir";;
- esac
- done
- dependency_libs="$temp_deplibs"
- fi
-
- newlib_search_path="$newlib_search_path $absdir"
- # Link against this library
- test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
- # ... and its dependency_libs
- tmp_libs=
- for deplib in $dependency_libs; do
- newdependency_libs="$deplib $newdependency_libs"
- if test "X$duplicate_deps" = "Xyes" ; then
- case "$tmp_libs " in
- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
- esac
- fi
- tmp_libs="$tmp_libs $deplib"
- done
-
- if test "$link_all_deplibs" != no; then
- # Add the search paths of all dependency libraries
- for deplib in $dependency_libs; do
- case $deplib in
- -L*) path="$deplib" ;;
- *.la)
- dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'`
- test "X$dir" = "X$deplib" && dir="."
- # We need an absolute path.
- case $dir in
- [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
- *)
- absdir=`cd "$dir" && pwd`
- if test -z "$absdir"; then
- $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2
- absdir="$dir"
- fi
- ;;
- esac
- if grep "^installed=no" $deplib > /dev/null; then
- path="$absdir/$objdir"
- else
- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
- if test -z "$libdir"; then
- $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
- exit $EXIT_FAILURE
- fi
- if test "$absdir" != "$libdir"; then
- $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2
- fi
- path="$absdir"
- fi
- depdepl=
- case $host in
- *-*-darwin*)
- # we do not want to link against static libs,
- # but need to link against shared
- eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
- if test -n "$deplibrary_names" ; then
- for tmp in $deplibrary_names ; do
- depdepl=$tmp
- done
- if test -f "$path/$depdepl" ; then
- depdepl="$path/$depdepl"
- fi
- # do not add paths which are already there
- case " $newlib_search_path " in
- *" $path "*) ;;
- *) newlib_search_path="$newlib_search_path $path";;
- esac
- fi
- path=""
- ;;
- *)
- path="-L$path"
- ;;
- esac
- ;;
- -l*)
- case $host in
- *-*-darwin*)
- # Again, we only want to link against shared libraries
- eval tmp_libs=`$echo "X$deplib" | $Xsed -e "s,^\-l,,"`
- for tmp in $newlib_search_path ; do
- if test -f "$tmp/lib$tmp_libs.dylib" ; then
- eval depdepl="$tmp/lib$tmp_libs.dylib"
- break
- fi
- done
- path=""
- ;;
- *) continue ;;
- esac
- ;;
- *) continue ;;
- esac
- case " $deplibs " in
- *" $path "*) ;;
- *) deplibs="$path $deplibs" ;;
- esac
- case " $deplibs " in
- *" $depdepl "*) ;;
- *) deplibs="$depdepl $deplibs" ;;
- esac
- done
- fi # link_all_deplibs != no
- fi # linkmode = lib
- done # for deplib in $libs
- dependency_libs="$newdependency_libs"
- if test "$pass" = dlpreopen; then
- # Link the dlpreopened libraries before other libraries
- for deplib in $save_deplibs; do
- deplibs="$deplib $deplibs"
- done
- fi
- if test "$pass" != dlopen; then
- if test "$pass" != conv; then
- # Make sure lib_search_path contains only unique directories.
- lib_search_path=
- for dir in $newlib_search_path; do
- case "$lib_search_path " in
- *" $dir "*) ;;
- *) lib_search_path="$lib_search_path $dir" ;;
- esac
- done
- newlib_search_path=
- fi
-
- if test "$linkmode,$pass" != "prog,link"; then
- vars="deplibs"
- else
- vars="compile_deplibs finalize_deplibs"
- fi
- for var in $vars dependency_libs; do
- # Add libraries to $var in reverse order
- eval tmp_libs=\"\$$var\"
- new_libs=
- for deplib in $tmp_libs; do
- # FIXME: Pedantically, this is the right thing to do, so
- # that some nasty dependency loop isn't accidentally
- # broken:
- #new_libs="$deplib $new_libs"
- # Pragmatically, this seems to cause very few problems in
- # practice:
- case $deplib in
- -L*) new_libs="$deplib $new_libs" ;;
- -R*) ;;
- *)
- # And here is the reason: when a library appears more
- # than once as an explicit dependence of a library, or
- # is implicitly linked in more than once by the
- # compiler, it is considered special, and multiple
- # occurrences thereof are not removed. Compare this
- # with having the same library being listed as a
- # dependency of multiple other libraries: in this case,
- # we know (pedantically, we assume) the library does not
- # need to be listed more than once, so we keep only the
- # last copy. This is not always right, but it is rare
- # enough that we require users that really mean to play
- # such unportable linking tricks to link the library
- # using -Wl,-lname, so that libtool does not consider it
- # for duplicate removal.
- case " $specialdeplibs " in
- *" $deplib "*) new_libs="$deplib $new_libs" ;;
- *)
- case " $new_libs " in
- *" $deplib "*) ;;
- *) new_libs="$deplib $new_libs" ;;
- esac
- ;;
- esac
- ;;
- esac
- done
- tmp_libs=
- for deplib in $new_libs; do
- case $deplib in
- -L*)
- case " $tmp_libs " in
- *" $deplib "*) ;;
- *) tmp_libs="$tmp_libs $deplib" ;;
- esac
- ;;
- *) tmp_libs="$tmp_libs $deplib" ;;
- esac
- done
- eval $var=\"$tmp_libs\"
- done # for var
- fi
- # Last step: remove runtime libs from dependency_libs
- # (they stay in deplibs)
- tmp_libs=
- for i in $dependency_libs ; do
- case " $predeps $postdeps $compiler_lib_search_path " in
- *" $i "*)
- i=""
- ;;
- esac
- if test -n "$i" ; then
- tmp_libs="$tmp_libs $i"
- fi
- done
- dependency_libs=$tmp_libs
- done # for pass
- if test "$linkmode" = prog; then
- dlfiles="$newdlfiles"
- dlprefiles="$newdlprefiles"
- fi
-
- case $linkmode in
- oldlib)
- if test -n "$deplibs"; then
- $echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2
- fi
-
- if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
- $echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2
- fi
-
- if test -n "$rpath"; then
- $echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2
- fi
-
- if test -n "$xrpath"; then
- $echo "$modename: warning: \`-R' is ignored for archives" 1>&2
- fi
-
- if test -n "$vinfo"; then
- $echo "$modename: warning: \`-version-info/-version-number' is ignored for archives" 1>&2
- fi
-
- if test -n "$release"; then
- $echo "$modename: warning: \`-release' is ignored for archives" 1>&2
- fi
-
- if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
- $echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2
- fi
-
- # Now set the variables for building old libraries.
- build_libtool_libs=no
- oldlibs="$output"
- objs="$objs$old_deplibs"
- ;;
-
- lib)
- # Make sure we only generate libraries of the form `libNAME.la'.
- case $outputname in
- lib*)
- name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
- eval shared_ext=\"$shrext_cmds\"
- eval libname=\"$libname_spec\"
- ;;
- *)
- if test "$module" = no; then
- $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
- if test "$need_lib_prefix" != no; then
- # Add the "lib" prefix for modules if required
- name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
- eval shared_ext=\"$shrext_cmds\"
- eval libname=\"$libname_spec\"
- else
- libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
- fi
- ;;
- esac
-
- if test -n "$objs"; then
- if test "$deplibs_check_method" != pass_all; then
- $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1
- exit $EXIT_FAILURE
- else
- $echo
- $echo "*** Warning: Linking the shared library $output against the non-libtool"
- $echo "*** objects $objs is not portable!"
- libobjs="$libobjs $objs"
- fi
- fi
-
- if test "$dlself" != no; then
- $echo "$modename: warning: \`-dlopen self' is ignored for libtool libraries" 1>&2
- fi
-
- set dummy $rpath
- if test "$#" -gt 2; then
- $echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2
- fi
- install_libdir="$2"
-
- oldlibs=
- if test -z "$rpath"; then
- if test "$build_libtool_libs" = yes; then
- # Building a libtool convenience library.
- # Some compilers have problems with a `.al' extension so
- # convenience libraries should have the same extension an
- # archive normally would.
- oldlibs="$output_objdir/$libname.$libext $oldlibs"
- build_libtool_libs=convenience
- build_old_libs=yes
- fi
-
- if test -n "$vinfo"; then
- $echo "$modename: warning: \`-version-info/-version-number' is ignored for convenience libraries" 1>&2
- fi
-
- if test -n "$release"; then
- $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2
- fi
- else
-
- # Parse the version information argument.
- save_ifs="$IFS"; IFS=':'
- set dummy $vinfo 0 0 0
- IFS="$save_ifs"
-
- if test -n "$8"; then
- $echo "$modename: too many parameters to \`-version-info'" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
-
- # convert absolute version numbers to libtool ages
- # this retains compatibility with .la files and attempts
- # to make the code below a bit more comprehensible
-
- case $vinfo_number in
- yes)
- number_major="$2"
- number_minor="$3"
- number_revision="$4"
- #
- # There are really only two kinds -- those that
- # use the current revision as the major version
- # and those that subtract age and use age as
- # a minor version. But, then there is irix
- # which has an extra 1 added just for fun
- #
- case $version_type in
- darwin|linux|osf|windows|none)
- current=`expr $number_major + $number_minor`
- age="$number_minor"
- revision="$number_revision"
- ;;
- freebsd-aout|freebsd-elf|sunos)
- current="$number_major"
- revision="$number_minor"
- age="0"
- ;;
- irix|nonstopux)
- current=`expr $number_major + $number_minor`
- age="$number_minor"
- revision="$number_minor"
- lt_irix_increment=no
- ;;
- esac
- ;;
- no)
- current="$2"
- revision="$3"
- age="$4"
- ;;
- esac
-
- # Check that each of the things are valid numbers.
- case $current in
- 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
- *)
- $echo "$modename: CURRENT \`$current' must be a nonnegative integer" 1>&2
- $echo "$modename: \`$vinfo' is not valid version information" 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
-
- case $revision in
- 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
- *)
- $echo "$modename: REVISION \`$revision' must be a nonnegative integer" 1>&2
- $echo "$modename: \`$vinfo' is not valid version information" 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
-
- case $age in
- 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
- *)
- $echo "$modename: AGE \`$age' must be a nonnegative integer" 1>&2
- $echo "$modename: \`$vinfo' is not valid version information" 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
-
- if test "$age" -gt "$current"; then
- $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2
- $echo "$modename: \`$vinfo' is not valid version information" 1>&2
- exit $EXIT_FAILURE
- fi
-
- # Calculate the version variables.
- major=
- versuffix=
- verstring=
- case $version_type in
- none) ;;
-
- darwin)
- # Like Linux, but with the current version available in
- # verstring for coding it into the library header
- major=.`expr $current - $age`
- versuffix="$major.$age.$revision"
- # Darwin ld doesn't like 0 for these options...
- minor_current=`expr $current + 1`
- xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
- verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
- ;;
-
- freebsd-aout)
- major=".$current"
- versuffix=".$current.$revision";
- ;;
-
- freebsd-elf)
- major=".$current"
- versuffix=".$current";
- ;;
-
- irix | nonstopux)
- if test "X$lt_irix_increment" = "Xno"; then
- major=`expr $current - $age`
- else
- major=`expr $current - $age + 1`
- fi
- case $version_type in
- nonstopux) verstring_prefix=nonstopux ;;
- *) verstring_prefix=sgi ;;
- esac
- verstring="$verstring_prefix$major.$revision"
-
- # Add in all the interfaces that we are compatible with.
- loop=$revision
- while test "$loop" -ne 0; do
- iface=`expr $revision - $loop`
- loop=`expr $loop - 1`
- verstring="$verstring_prefix$major.$iface:$verstring"
- done
-
- # Before this point, $major must not contain `.'.
- major=.$major
- versuffix="$major.$revision"
- ;;
-
- linux)
- major=.`expr $current - $age`
- versuffix="$major.$age.$revision"
- ;;
-
- osf)
- major=.`expr $current - $age`
- versuffix=".$current.$age.$revision"
- verstring="$current.$age.$revision"
-
- # Add in all the interfaces that we are compatible with.
- loop=$age
- while test "$loop" -ne 0; do
- iface=`expr $current - $loop`
- loop=`expr $loop - 1`
- verstring="$verstring:${iface}.0"
- done
-
- # Make executables depend on our current version.
- verstring="$verstring:${current}.0"
- ;;
-
- sunos)
- major=".$current"
- versuffix=".$current.$revision"
- ;;
-
- windows)
- # Use '-' rather than '.', since we only want one
- # extension on DOS 8.3 filesystems.
- major=`expr $current - $age`
- versuffix="-$major"
- ;;
-
- *)
- $echo "$modename: unknown library version type \`$version_type'" 1>&2
- $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
-
- # Clear the version info if we defaulted, and they specified a release.
- if test -z "$vinfo" && test -n "$release"; then
- major=
- case $version_type in
- darwin)
- # we can't check for "0.0" in archive_cmds due to quoting
- # problems, so we reset it completely
- verstring=
- ;;
- *)
- verstring="0.0"
- ;;
- esac
- if test "$need_version" = no; then
- versuffix=
- else
- versuffix=".0.0"
- fi
- fi
-
- # Remove version info from name if versioning should be avoided
- if test "$avoid_version" = yes && test "$need_version" = no; then
- major=
- versuffix=
- verstring=""
- fi
-
- # Check to see if the archive will have undefined symbols.
- if test "$allow_undefined" = yes; then
- if test "$allow_undefined_flag" = unsupported; then
- $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2
- build_libtool_libs=no
- build_old_libs=yes
- fi
- else
- # Don't allow undefined symbols.
- allow_undefined_flag="$no_undefined_flag"
- fi
- fi
-
- if test "$mode" != relink; then
- # Remove our outputs, but don't remove object files since they
- # may have been created when compiling PIC objects.
- removelist=
- tempremovelist=`$echo "$output_objdir/*"`
- for p in $tempremovelist; do
- case $p in
- *.$objext)
- ;;
- $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
- if test "X$precious_files_regex" != "X"; then
- if echo $p | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
- then
- continue
- fi
- fi
- removelist="$removelist $p"
- ;;
- *) ;;
- esac
- done
- if test -n "$removelist"; then
- $show "${rm}r $removelist"
- $run ${rm}r $removelist
- fi
- fi
-
- # Now set the variables for building old libraries.
- if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
- oldlibs="$oldlibs $output_objdir/$libname.$libext"
-
- # Transform .lo files to .o files.
- oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
- fi
-
- # Eliminate all temporary directories.
- #for path in $notinst_path; do
- # lib_search_path=`$echo "$lib_search_path " | ${SED} -e "s% $path % %g"`
- # deplibs=`$echo "$deplibs " | ${SED} -e "s% -L$path % %g"`
- # dependency_libs=`$echo "$dependency_libs " | ${SED} -e "s% -L$path % %g"`
- #done
-
- if test -n "$xrpath"; then
- # If the user specified any rpath flags, then add them.
- temp_xrpath=
- for libdir in $xrpath; do
- temp_xrpath="$temp_xrpath -R$libdir"
- case "$finalize_rpath " in
- *" $libdir "*) ;;
- *) finalize_rpath="$finalize_rpath $libdir" ;;
- esac
- done
- if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
- dependency_libs="$temp_xrpath $dependency_libs"
- fi
- fi
-
- # Make sure dlfiles contains only unique files that won't be dlpreopened
- old_dlfiles="$dlfiles"
- dlfiles=
- for lib in $old_dlfiles; do
- case " $dlprefiles $dlfiles " in
- *" $lib "*) ;;
- *) dlfiles="$dlfiles $lib" ;;
- esac
- done
-
- # Make sure dlprefiles contains only unique files
- old_dlprefiles="$dlprefiles"
- dlprefiles=
- for lib in $old_dlprefiles; do
- case "$dlprefiles " in
- *" $lib "*) ;;
- *) dlprefiles="$dlprefiles $lib" ;;
- esac
- done
-
- if test "$build_libtool_libs" = yes; then
- if test -n "$rpath"; then
- case $host in
- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*)
- # these systems don't actually have a c library (as such)!
- ;;
- *-*-rhapsody* | *-*-darwin1.[012])
- # Rhapsody C library is in the System framework
- deplibs="$deplibs -framework System"
- ;;
- *-*-netbsd*)
- # Don't link with libc until the a.out ld.so is fixed.
- ;;
- *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
- # Do not include libc due to us having libc/libc_r.
- ;;
- *-*-sco3.2v5* | *-*-sco5v6*)
- # Causes problems with __ctype
- ;;
- *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
- # Compiler inserts libc in the correct place for threads to work
- ;;
- *)
- # Add libc to deplibs on all other systems if necessary.
- if test "$build_libtool_need_lc" = "yes"; then
- deplibs="$deplibs -lc"
- fi
- ;;
- esac
- fi
-
- # Transform deplibs into only deplibs that can be linked in shared.
- name_save=$name
- libname_save=$libname
- release_save=$release
- versuffix_save=$versuffix
- major_save=$major
- # I'm not sure if I'm treating the release correctly. I think
- # release should show up in the -l (ie -lgmp5) so we don't want to
- # add it in twice. Is that correct?
- release=""
- versuffix=""
- major=""
- newdeplibs=
- droppeddeps=no
- case $deplibs_check_method in
- pass_all)
- # Don't check for shared/static. Everything works.
- # This might be a little naive. We might want to check
- # whether the library exists or not. But this is on
- # osf3 & osf4 and I'm not really sure... Just
- # implementing what was already the behavior.
- newdeplibs=$deplibs
- ;;
- test_compile)
- # This code stresses the "libraries are programs" paradigm to its
- # limits. Maybe even breaks it. We compile a program, linking it
- # against the deplibs as a proxy for the library. Then we can check
- # whether they linked in statically or dynamically with ldd.
- $rm conftest.c
- cat > conftest.c <<EOF
- int main() { return 0; }
-EOF
- $rm conftest
- if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then
- ldd_output=`ldd conftest`
- for i in $deplibs; do
- name=`expr $i : '-l\(.*\)'`
- # If $name is empty we are operating on a -L argument.
- if test "$name" != "" && test "$name" != "0"; then
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
- case " $predeps $postdeps " in
- *" $i "*)
- newdeplibs="$newdeplibs $i"
- i=""
- ;;
- esac
- fi
- if test -n "$i" ; then
- libname=`eval \\$echo \"$libname_spec\"`
- deplib_matches=`eval \\$echo \"$library_names_spec\"`
- set dummy $deplib_matches
- deplib_match=$2
- if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
- newdeplibs="$newdeplibs $i"
- else
- droppeddeps=yes
- $echo
- $echo "*** Warning: dynamic linker does not accept needed library $i."
- $echo "*** I have the capability to make that library automatically link in when"
- $echo "*** you link to this library. But I can only do this if you have a"
- $echo "*** shared version of the library, which I believe you do not have"
- $echo "*** because a test_compile did reveal that the linker did not use it for"
- $echo "*** its dynamic dependency list that programs get resolved with at runtime."
- fi
- fi
- else
- newdeplibs="$newdeplibs $i"
- fi
- done
- else
- # Error occurred in the first compile. Let's try to salvage
- # the situation: Compile a separate program for each library.
- for i in $deplibs; do
- name=`expr $i : '-l\(.*\)'`
- # If $name is empty we are operating on a -L argument.
- if test "$name" != "" && test "$name" != "0"; then
- $rm conftest
- if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
- ldd_output=`ldd conftest`
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
- case " $predeps $postdeps " in
- *" $i "*)
- newdeplibs="$newdeplibs $i"
- i=""
- ;;
- esac
- fi
- if test -n "$i" ; then
- libname=`eval \\$echo \"$libname_spec\"`
- deplib_matches=`eval \\$echo \"$library_names_spec\"`
- set dummy $deplib_matches
- deplib_match=$2
- if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
- newdeplibs="$newdeplibs $i"
- else
- droppeddeps=yes
- $echo
- $echo "*** Warning: dynamic linker does not accept needed library $i."
- $echo "*** I have the capability to make that library automatically link in when"
- $echo "*** you link to this library. But I can only do this if you have a"
- $echo "*** shared version of the library, which you do not appear to have"
- $echo "*** because a test_compile did reveal that the linker did not use this one"
- $echo "*** as a dynamic dependency that programs can get resolved with at runtime."
- fi
- fi
- else
- droppeddeps=yes
- $echo
- $echo "*** Warning! Library $i is needed by this library but I was not able to"
- $echo "*** make it link in! You will probably need to install it or some"
- $echo "*** library that it depends on before this library will be fully"
- $echo "*** functional. Installing it before continuing would be even better."
- fi
- else
- newdeplibs="$newdeplibs $i"
- fi
- done
- fi
- ;;
- file_magic*)
- set dummy $deplibs_check_method
- file_magic_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
- for a_deplib in $deplibs; do
- name=`expr $a_deplib : '-l\(.*\)'`
- # If $name is empty we are operating on a -L argument.
- if test "$name" != "" && test "$name" != "0"; then
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
- case " $predeps $postdeps " in
- *" $a_deplib "*)
- newdeplibs="$newdeplibs $a_deplib"
- a_deplib=""
- ;;
- esac
- fi
- if test -n "$a_deplib" ; then
- libname=`eval \\$echo \"$libname_spec\"`
- for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
- potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
- for potent_lib in $potential_libs; do
- # Follow soft links.
- if ls -lLd "$potent_lib" 2>/dev/null \
- | grep " -> " >/dev/null; then
- continue
- fi
- # The statement above tries to avoid entering an
- # endless loop below, in case of cyclic links.
- # We might still enter an endless loop, since a link
- # loop can be closed while we follow links,
- # but so what?
- potlib="$potent_lib"
- while test -h "$potlib" 2>/dev/null; do
- potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
- case $potliblink in
- [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
- *) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
- esac
- done
- if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \
- | ${SED} 10q \
- | $EGREP "$file_magic_regex" > /dev/null; then
- newdeplibs="$newdeplibs $a_deplib"
- a_deplib=""
- break 2
- fi
- done
- done
- fi
- if test -n "$a_deplib" ; then
- droppeddeps=yes
- $echo
- $echo "*** Warning: linker path does not have real file for library $a_deplib."
- $echo "*** I have the capability to make that library automatically link in when"
- $echo "*** you link to this library. But I can only do this if you have a"
- $echo "*** shared version of the library, which you do not appear to have"
- $echo "*** because I did check the linker path looking for a file starting"
- if test -z "$potlib" ; then
- $echo "*** with $libname but no candidates were found. (...for file magic test)"
- else
- $echo "*** with $libname and none of the candidates passed a file format test"
- $echo "*** using a file magic. Last file checked: $potlib"
- fi
- fi
- else
- # Add a -L argument.
- newdeplibs="$newdeplibs $a_deplib"
- fi
- done # Gone through all deplibs.
- ;;
- match_pattern*)
- set dummy $deplibs_check_method
- match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
- for a_deplib in $deplibs; do
- name=`expr $a_deplib : '-l\(.*\)'`
- # If $name is empty we are operating on a -L argument.
- if test -n "$name" && test "$name" != "0"; then
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
- case " $predeps $postdeps " in
- *" $a_deplib "*)
- newdeplibs="$newdeplibs $a_deplib"
- a_deplib=""
- ;;
- esac
- fi
- if test -n "$a_deplib" ; then
- libname=`eval \\$echo \"$libname_spec\"`
- for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
- potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
- for potent_lib in $potential_libs; do
- potlib="$potent_lib" # see symlink-check above in file_magic test
- if eval $echo \"$potent_lib\" 2>/dev/null \
- | ${SED} 10q \
- | $EGREP "$match_pattern_regex" > /dev/null; then
- newdeplibs="$newdeplibs $a_deplib"
- a_deplib=""
- break 2
- fi
- done
- done
- fi
- if test -n "$a_deplib" ; then
- droppeddeps=yes
- $echo
- $echo "*** Warning: linker path does not have real file for library $a_deplib."
- $echo "*** I have the capability to make that library automatically link in when"
- $echo "*** you link to this library. But I can only do this if you have a"
- $echo "*** shared version of the library, which you do not appear to have"
- $echo "*** because I did check the linker path looking for a file starting"
- if test -z "$potlib" ; then
- $echo "*** with $libname but no candidates were found. (...for regex pattern test)"
- else
- $echo "*** with $libname and none of the candidates passed a file format test"
- $echo "*** using a regex pattern. Last file checked: $potlib"
- fi
- fi
- else
- # Add a -L argument.
- newdeplibs="$newdeplibs $a_deplib"
- fi
- done # Gone through all deplibs.
- ;;
- none | unknown | *)
- newdeplibs=""
- tmp_deplibs=`$echo "X $deplibs" | $Xsed -e 's/ -lc$//' \
- -e 's/ -[LR][^ ]*//g'`
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
- for i in $predeps $postdeps ; do
- # can't use Xsed below, because $i might contain '/'
- tmp_deplibs=`$echo "X $tmp_deplibs" | ${SED} -e "1s,^X,," -e "s,$i,,"`
- done
- fi
- if $echo "X $tmp_deplibs" | $Xsed -e 's/[ ]//g' \
- | grep . >/dev/null; then
- $echo
- if test "X$deplibs_check_method" = "Xnone"; then
- $echo "*** Warning: inter-library dependencies are not supported in this platform."
- else
- $echo "*** Warning: inter-library dependencies are not known to be supported."
- fi
- $echo "*** All declared inter-library dependencies are being dropped."
- droppeddeps=yes
- fi
- ;;
- esac
- versuffix=$versuffix_save
- major=$major_save
- release=$release_save
- libname=$libname_save
- name=$name_save
-
- case $host in
- *-*-rhapsody* | *-*-darwin1.[012])
- # On Rhapsody replace the C library is the System framework
- newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's/ -lc / -framework System /'`
- ;;
- esac
-
- if test "$droppeddeps" = yes; then
- if test "$module" = yes; then
- $echo
- $echo "*** Warning: libtool could not satisfy all declared inter-library"
- $echo "*** dependencies of module $libname. Therefore, libtool will create"
- $echo "*** a static module, that should work as long as the dlopening"
- $echo "*** application is linked with the -dlopen flag."
- if test -z "$global_symbol_pipe"; then
- $echo
- $echo "*** However, this would only work if libtool was able to extract symbol"
- $echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
- $echo "*** not find such a program. So, this module is probably useless."
- $echo "*** \`nm' from GNU binutils and a full rebuild may help."
- fi
- if test "$build_old_libs" = no; then
- oldlibs="$output_objdir/$libname.$libext"
- build_libtool_libs=module
- build_old_libs=yes
- else
- build_libtool_libs=no
- fi
- else
- $echo "*** The inter-library dependencies that have been dropped here will be"
- $echo "*** automatically added whenever a program is linked with this library"
- $echo "*** or is declared to -dlopen it."
-
- if test "$allow_undefined" = no; then
- $echo
- $echo "*** Since this library must not contain undefined symbols,"
- $echo "*** because either the platform does not support them or"
- $echo "*** it was explicitly requested with -no-undefined,"
- $echo "*** libtool will only create a static version of it."
- if test "$build_old_libs" = no; then
- oldlibs="$output_objdir/$libname.$libext"
- build_libtool_libs=module
- build_old_libs=yes
- else
- build_libtool_libs=no
- fi
- fi
- fi
- fi
- # Done checking deplibs!
- deplibs=$newdeplibs
- fi
-
-
- # move library search paths that coincide with paths to not yet
- # installed libraries to the beginning of the library search list
- new_libs=
- for path in $notinst_path; do
- case " $new_libs " in
- *" -L$path/$objdir "*) ;;
- *)
- case " $deplibs " in
- *" -L$path/$objdir "*)
- new_libs="$new_libs -L$path/$objdir" ;;
- esac
- ;;
- esac
- done
- for deplib in $deplibs; do
- case $deplib in
- -L*)
- case " $new_libs " in
- *" $deplib "*) ;;
- *) new_libs="$new_libs $deplib" ;;
- esac
- ;;
- *) new_libs="$new_libs $deplib" ;;
- esac
- done
- deplibs="$new_libs"
-
-
- # All the library-specific variables (install_libdir is set above).
- library_names=
- old_library=
- dlname=
-
- # Test again, we may have decided not to build it any more
- if test "$build_libtool_libs" = yes; then
- if test "$hardcode_into_libs" = yes; then
- # Hardcode the library paths
- hardcode_libdirs=
- dep_rpath=
- rpath="$finalize_rpath"
- test "$mode" != relink && rpath="$compile_rpath$rpath"
- for libdir in $rpath; do
- if test -n "$hardcode_libdir_flag_spec"; then
- if test -n "$hardcode_libdir_separator"; then
- if test -z "$hardcode_libdirs"; then
- hardcode_libdirs="$libdir"
- else
- # Just accumulate the unique libdirs.
- case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
- *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
- ;;
- *)
- hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
- ;;
- esac
- fi
- else
- eval flag=\"$hardcode_libdir_flag_spec\"
- dep_rpath="$dep_rpath $flag"
- fi
- elif test -n "$runpath_var"; then
- case "$perm_rpath " in
- *" $libdir "*) ;;
- *) perm_rpath="$perm_rpath $libdir" ;;
- esac
- fi
- done
- # Substitute the hardcoded libdirs into the rpath.
- if test -n "$hardcode_libdir_separator" &&
- test -n "$hardcode_libdirs"; then
- libdir="$hardcode_libdirs"
- if test -n "$hardcode_libdir_flag_spec_ld"; then
- case $archive_cmds in
- *\$LD*) eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\" ;;
- *) eval dep_rpath=\"$hardcode_libdir_flag_spec\" ;;
- esac
- else
- eval dep_rpath=\"$hardcode_libdir_flag_spec\"
- fi
- fi
- if test -n "$runpath_var" && test -n "$perm_rpath"; then
- # We should set the runpath_var.
- rpath=
- for dir in $perm_rpath; do
- rpath="$rpath$dir:"
- done
- eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
- fi
- test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
- fi
-
- shlibpath="$finalize_shlibpath"
- test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
- if test -n "$shlibpath"; then
- eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
- fi
-
- # Get the real and link names of the library.
- eval shared_ext=\"$shrext_cmds\"
- eval library_names=\"$library_names_spec\"
- set dummy $library_names
- realname="$2"
- shift; shift
-
- if test -n "$soname_spec"; then
- eval soname=\"$soname_spec\"
- else
- soname="$realname"
- fi
- if test -z "$dlname"; then
- dlname=$soname
- fi
-
- lib="$output_objdir/$realname"
- linknames=
- for link
- do
- linknames="$linknames $link"
- done
-
- # Use standard objects if they are pic
- test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
-
- # Prepare the list of exported symbols
- if test -z "$export_symbols"; then
- if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
- $show "generating symbol list for \`$libname.la'"
- export_symbols="$output_objdir/$libname.exp"
- $run $rm $export_symbols
- cmds=$export_symbols_cmds
- save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- eval cmd=\"$cmd\"
- if len=`expr "X$cmd" : ".*"` &&
- test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
- $show "$cmd"
- $run eval "$cmd" || exit $?
- skipped_export=false
- else
- # The command line is too long to execute in one step.
- $show "using reloadable object file for export list..."
- skipped_export=:
- # Break out early, otherwise skipped_export may be
- # set to false by a later but shorter cmd.
- break
- fi
- done
- IFS="$save_ifs"
- if test -n "$export_symbols_regex"; then
- $show "$EGREP -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\""
- $run eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
- $show "$mv \"${export_symbols}T\" \"$export_symbols\""
- $run eval '$mv "${export_symbols}T" "$export_symbols"'
- fi
- fi
- fi
-
- if test -n "$export_symbols" && test -n "$include_expsyms"; then
- $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"'
- fi
-
- tmp_deplibs=
- for test_deplib in $deplibs; do
- case " $convenience " in
- *" $test_deplib "*) ;;
- *)
- tmp_deplibs="$tmp_deplibs $test_deplib"
- ;;
- esac
- done
- deplibs="$tmp_deplibs"
-
- if test -n "$convenience"; then
- if test -n "$whole_archive_flag_spec"; then
- save_libobjs=$libobjs
- eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
- else
- gentop="$output_objdir/${outputname}x"
- generated="$generated $gentop"
-
- func_extract_archives $gentop $convenience
- libobjs="$libobjs $func_extract_archives_result"
- fi
- fi
-
- if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
- eval flag=\"$thread_safe_flag_spec\"
- linker_flags="$linker_flags $flag"
- fi
-
- # Make a backup of the uninstalled library when relinking
- if test "$mode" = relink; then
- $run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $?
- fi
-
- # Do each of the archive commands.
- if test "$module" = yes && test -n "$module_cmds" ; then
- if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
- eval test_cmds=\"$module_expsym_cmds\"
- cmds=$module_expsym_cmds
- else
- eval test_cmds=\"$module_cmds\"
- cmds=$module_cmds
- fi
- else
- if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
- eval test_cmds=\"$archive_expsym_cmds\"
- cmds=$archive_expsym_cmds
- else
- eval test_cmds=\"$archive_cmds\"
- cmds=$archive_cmds
- fi
- fi
-
- if test "X$skipped_export" != "X:" &&
- len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
- test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
- :
- else
- # The command line is too long to link in one step, link piecewise.
- $echo "creating reloadable object files..."
-
- # Save the value of $output and $libobjs because we want to
- # use them later. If we have whole_archive_flag_spec, we
- # want to use save_libobjs as it was before
- # whole_archive_flag_spec was expanded, because we can't
- # assume the linker understands whole_archive_flag_spec.
- # This may have to be revisited, in case too many
- # convenience libraries get linked in and end up exceeding
- # the spec.
- if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
- save_libobjs=$libobjs
- fi
- save_output=$output
- output_la=`$echo "X$output" | $Xsed -e "$basename"`
-
- # Clear the reloadable object creation command queue and
- # initialize k to one.
- test_cmds=
- concat_cmds=
- objlist=
- delfiles=
- last_robj=
- k=1
- output=$output_objdir/$output_la-${k}.$objext
- # Loop over the list of objects to be linked.
- for obj in $save_libobjs
- do
- eval test_cmds=\"$reload_cmds $objlist $last_robj\"
- if test "X$objlist" = X ||
- { len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
- test "$len" -le "$max_cmd_len"; }; then
- objlist="$objlist $obj"
- else
- # The command $test_cmds is almost too long, add a
- # command to the queue.
- if test "$k" -eq 1 ; then
- # The first file doesn't have a previous command to add.
- eval concat_cmds=\"$reload_cmds $objlist $last_robj\"
- else
- # All subsequent reloadable object files will link in
- # the last one created.
- eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\"
- fi
- last_robj=$output_objdir/$output_la-${k}.$objext
- k=`expr $k + 1`
- output=$output_objdir/$output_la-${k}.$objext
- objlist=$obj
- len=1
- fi
- done
- # Handle the remaining objects by creating one last
- # reloadable object file. All subsequent reloadable object
- # files will link in the last one created.
- test -z "$concat_cmds" || concat_cmds=$concat_cmds~
- eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\"
-
- if ${skipped_export-false}; then
- $show "generating symbol list for \`$libname.la'"
- export_symbols="$output_objdir/$libname.exp"
- $run $rm $export_symbols
- libobjs=$output
- # Append the command to create the export file.
- eval concat_cmds=\"\$concat_cmds~$export_symbols_cmds\"
- fi
-
- # Set up a command to remove the reloadable object files
- # after they are used.
- i=0
- while test "$i" -lt "$k"
- do
- i=`expr $i + 1`
- delfiles="$delfiles $output_objdir/$output_la-${i}.$objext"
- done
-
- $echo "creating a temporary reloadable object file: $output"
-
- # Loop through the commands generated above and execute them.
- save_ifs="$IFS"; IFS='~'
- for cmd in $concat_cmds; do
- IFS="$save_ifs"
- $show "$cmd"
- $run eval "$cmd" || exit $?
- done
- IFS="$save_ifs"
-
- libobjs=$output
- # Restore the value of output.
- output=$save_output
-
- if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
- eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
- fi
- # Expand the library linking commands again to reset the
- # value of $libobjs for piecewise linking.
-
- # Do each of the archive commands.
- if test "$module" = yes && test -n "$module_cmds" ; then
- if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
- cmds=$module_expsym_cmds
- else
- cmds=$module_cmds
- fi
- else
- if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
- cmds=$archive_expsym_cmds
- else
- cmds=$archive_cmds
- fi
- fi
-
- # Append the command to remove the reloadable object files
- # to the just-reset $cmds.
- eval cmds=\"\$cmds~\$rm $delfiles\"
- fi
- save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- eval cmd=\"$cmd\"
- $show "$cmd"
- $run eval "$cmd" || {
- lt_exit=$?
-
- # Restore the uninstalled library and exit
- if test "$mode" = relink; then
- $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)'
- fi
-
- exit $lt_exit
- }
- done
- IFS="$save_ifs"
-
- # Restore the uninstalled library and exit
- if test "$mode" = relink; then
- $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $?
-
- if test -n "$convenience"; then
- if test -z "$whole_archive_flag_spec"; then
- $show "${rm}r $gentop"
- $run ${rm}r "$gentop"
- fi
- fi
-
- exit $EXIT_SUCCESS
- fi
-
- # Create links to the real library.
- for linkname in $linknames; do
- if test "$realname" != "$linkname"; then
- $show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)"
- $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $?
- fi
- done
-
- # If -module or -export-dynamic was specified, set the dlname.
- if test "$module" = yes || test "$export_dynamic" = yes; then
- # On all known operating systems, these are identical.
- dlname="$soname"
- fi
- fi
- ;;
-
- obj)
- if test -n "$deplibs"; then
- $echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2
- fi
-
- if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
- $echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2
- fi
-
- if test -n "$rpath"; then
- $echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2
- fi
-
- if test -n "$xrpath"; then
- $echo "$modename: warning: \`-R' is ignored for objects" 1>&2
- fi
-
- if test -n "$vinfo"; then
- $echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2
- fi
-
- if test -n "$release"; then
- $echo "$modename: warning: \`-release' is ignored for objects" 1>&2
- fi
-
- case $output in
- *.lo)
- if test -n "$objs$old_deplibs"; then
- $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2
- exit $EXIT_FAILURE
- fi
- libobj="$output"
- obj=`$echo "X$output" | $Xsed -e "$lo2o"`
- ;;
- *)
- libobj=
- obj="$output"
- ;;
- esac
-
- # Delete the old objects.
- $run $rm $obj $libobj
-
- # Objects from convenience libraries. This assumes
- # single-version convenience libraries. Whenever we create
- # different ones for PIC/non-PIC, this we'll have to duplicate
- # the extraction.
- reload_conv_objs=
- gentop=
- # reload_cmds runs $LD directly, so let us get rid of
- # -Wl from whole_archive_flag_spec and hope we can get by with
- # turning comma into space..
- wl=
-
- if test -n "$convenience"; then
- if test -n "$whole_archive_flag_spec"; then
- eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
- reload_conv_objs=$reload_objs\ `$echo "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'`
- else
- gentop="$output_objdir/${obj}x"
- generated="$generated $gentop"
-
- func_extract_archives $gentop $convenience
- reload_conv_objs="$reload_objs $func_extract_archives_result"
- fi
- fi
-
- # Create the old-style object.
- reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
-
- output="$obj"
- cmds=$reload_cmds
- save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- eval cmd=\"$cmd\"
- $show "$cmd"
- $run eval "$cmd" || exit $?
- done
- IFS="$save_ifs"
-
- # Exit if we aren't doing a library object file.
- if test -z "$libobj"; then
- if test -n "$gentop"; then
- $show "${rm}r $gentop"
- $run ${rm}r $gentop
- fi
-
- exit $EXIT_SUCCESS
- fi
-
- if test "$build_libtool_libs" != yes; then
- if test -n "$gentop"; then
- $show "${rm}r $gentop"
- $run ${rm}r $gentop
- fi
-
- # Create an invalid libtool object if no PIC, so that we don't
- # accidentally link it into a program.
- # $show "echo timestamp > $libobj"
- # $run eval "echo timestamp > $libobj" || exit $?
- exit $EXIT_SUCCESS
- fi
-
- if test -n "$pic_flag" || test "$pic_mode" != default; then
- # Only do commands if we really have different PIC objects.
- reload_objs="$libobjs $reload_conv_objs"
- output="$libobj"
- cmds=$reload_cmds
- save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- eval cmd=\"$cmd\"
- $show "$cmd"
- $run eval "$cmd" || exit $?
- done
- IFS="$save_ifs"
- fi
-
- if test -n "$gentop"; then
- $show "${rm}r $gentop"
- $run ${rm}r $gentop
- fi
-
- exit $EXIT_SUCCESS
- ;;
-
- prog)
- case $host in
- *cygwin*) output=`$echo $output | ${SED} -e 's,.exe$,,;s,$,.exe,'` ;;
- esac
- if test -n "$vinfo"; then
- $echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2
- fi
-
- if test -n "$release"; then
- $echo "$modename: warning: \`-release' is ignored for programs" 1>&2
- fi
-
- if test "$preload" = yes; then
- if test "$dlopen_support" = unknown && test "$dlopen_self" = unknown &&
- test "$dlopen_self_static" = unknown; then
- $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support."
- fi
- fi
-
- case $host in
- *-*-rhapsody* | *-*-darwin1.[012])
- # On Rhapsody replace the C library is the System framework
- compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
- finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
- ;;
- esac
-
- case $host in
- *darwin*)
- # Don't allow lazy linking, it breaks C++ global constructors
- if test "$tagname" = CXX ; then
- compile_command="$compile_command ${wl}-bind_at_load"
- finalize_command="$finalize_command ${wl}-bind_at_load"
- fi
- ;;
- esac
-
-
- # move library search paths that coincide with paths to not yet
- # installed libraries to the beginning of the library search list
- new_libs=
- for path in $notinst_path; do
- case " $new_libs " in
- *" -L$path/$objdir "*) ;;
- *)
- case " $compile_deplibs " in
- *" -L$path/$objdir "*)
- new_libs="$new_libs -L$path/$objdir" ;;
- esac
- ;;
- esac
- done
- for deplib in $compile_deplibs; do
- case $deplib in
- -L*)
- case " $new_libs " in
- *" $deplib "*) ;;
- *) new_libs="$new_libs $deplib" ;;
- esac
- ;;
- *) new_libs="$new_libs $deplib" ;;
- esac
- done
- compile_deplibs="$new_libs"
-
-
- compile_command="$compile_command $compile_deplibs"
- finalize_command="$finalize_command $finalize_deplibs"
-
- if test -n "$rpath$xrpath"; then
- # If the user specified any rpath flags, then add them.
- for libdir in $rpath $xrpath; do
- # This is the magic to use -rpath.
- case "$finalize_rpath " in
- *" $libdir "*) ;;
- *) finalize_rpath="$finalize_rpath $libdir" ;;
- esac
- done
- fi
-
- # Now hardcode the library paths
- rpath=
- hardcode_libdirs=
- for libdir in $compile_rpath $finalize_rpath; do
- if test -n "$hardcode_libdir_flag_spec"; then
- if test -n "$hardcode_libdir_separator"; then
- if test -z "$hardcode_libdirs"; then
- hardcode_libdirs="$libdir"
- else
- # Just accumulate the unique libdirs.
- case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
- *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
- ;;
- *)
- hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
- ;;
- esac
- fi
- else
- eval flag=\"$hardcode_libdir_flag_spec\"
- rpath="$rpath $flag"
- fi
- elif test -n "$runpath_var"; then
- case "$perm_rpath " in
- *" $libdir "*) ;;
- *) perm_rpath="$perm_rpath $libdir" ;;
- esac
- fi
- case $host in
- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
- testbindir=`$echo "X$libdir" | $Xsed -e 's*/lib$*/bin*'`
- case :$dllsearchpath: in
- *":$libdir:"*) ;;
- *) dllsearchpath="$dllsearchpath:$libdir";;
- esac
- case :$dllsearchpath: in
- *":$testbindir:"*) ;;
- *) dllsearchpath="$dllsearchpath:$testbindir";;
- esac
- ;;
- esac
- done
- # Substitute the hardcoded libdirs into the rpath.
- if test -n "$hardcode_libdir_separator" &&
- test -n "$hardcode_libdirs"; then
- libdir="$hardcode_libdirs"
- eval rpath=\" $hardcode_libdir_flag_spec\"
- fi
- compile_rpath="$rpath"
-
- rpath=
- hardcode_libdirs=
- for libdir in $finalize_rpath; do
- if test -n "$hardcode_libdir_flag_spec"; then
- if test -n "$hardcode_libdir_separator"; then
- if test -z "$hardcode_libdirs"; then
- hardcode_libdirs="$libdir"
- else
- # Just accumulate the unique libdirs.
- case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
- *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
- ;;
- *)
- hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
- ;;
- esac
- fi
- else
- eval flag=\"$hardcode_libdir_flag_spec\"
- rpath="$rpath $flag"
- fi
- elif test -n "$runpath_var"; then
- case "$finalize_perm_rpath " in
- *" $libdir "*) ;;
- *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;;
- esac
- fi
- done
- # Substitute the hardcoded libdirs into the rpath.
- if test -n "$hardcode_libdir_separator" &&
- test -n "$hardcode_libdirs"; then
- libdir="$hardcode_libdirs"
- eval rpath=\" $hardcode_libdir_flag_spec\"
- fi
- finalize_rpath="$rpath"
-
- if test -n "$libobjs" && test "$build_old_libs" = yes; then
- # Transform all the library objects into standard objects.
- compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
- finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
- fi
-
- dlsyms=
- if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
- if test -n "$NM" && test -n "$global_symbol_pipe"; then
- dlsyms="${outputname}S.c"
- else
- $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2
- fi
- fi
-
- if test -n "$dlsyms"; then
- case $dlsyms in
- "") ;;
- *.c)
- # Discover the nlist of each of the dlfiles.
- nlist="$output_objdir/${outputname}.nm"
-
- $show "$rm $nlist ${nlist}S ${nlist}T"
- $run $rm "$nlist" "${nlist}S" "${nlist}T"
-
- # Parse the name list into a source file.
- $show "creating $output_objdir/$dlsyms"
-
- test -z "$run" && $echo > "$output_objdir/$dlsyms" "\
-/* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */
-/* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */
-
-#ifdef __cplusplus
-extern \"C\" {
-#endif
-
-/* Prevent the only kind of declaration conflicts we can make. */
-#define lt_preloaded_symbols some_other_symbol
-
-/* External symbol declarations for the compiler. */\
-"
-
- if test "$dlself" = yes; then
- $show "generating symbol list for \`$output'"
-
- test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist"
-
- # Add our own program objects to the symbol list.
- progfiles=`$echo "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
- for arg in $progfiles; do
- $show "extracting global C symbols from \`$arg'"
- $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
- done
-
- if test -n "$exclude_expsyms"; then
- $run eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
- $run eval '$mv "$nlist"T "$nlist"'
- fi
-
- if test -n "$export_symbols_regex"; then
- $run eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
- $run eval '$mv "$nlist"T "$nlist"'
- fi
-
- # Prepare the list of exported symbols
- if test -z "$export_symbols"; then
- export_symbols="$output_objdir/$outputname.exp"
- $run $rm $export_symbols
- $run eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
- case $host in
- *cygwin* | *mingw* )
- $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
- $run eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
- ;;
- esac
- else
- $run eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
- $run eval 'grep -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
- $run eval 'mv "$nlist"T "$nlist"'
- case $host in
- *cygwin* | *mingw* )
- $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
- $run eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
- ;;
- esac
- fi
- fi
-
- for arg in $dlprefiles; do
- $show "extracting global C symbols from \`$arg'"
- name=`$echo "$arg" | ${SED} -e 's%^.*/%%'`
- $run eval '$echo ": $name " >> "$nlist"'
- $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
- done
-
- if test -z "$run"; then
- # Make sure we have at least an empty file.
- test -f "$nlist" || : > "$nlist"
-
- if test -n "$exclude_expsyms"; then
- $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
- $mv "$nlist"T "$nlist"
- fi
-
- # Try sorting and uniquifying the output.
- if grep -v "^: " < "$nlist" |
- if sort -k 3 </dev/null >/dev/null 2>&1; then
- sort -k 3
- else
- sort +2
- fi |
- uniq > "$nlist"S; then
- :
- else
- grep -v "^: " < "$nlist" > "$nlist"S
- fi
-
- if test -f "$nlist"S; then
- eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"'
- else
- $echo '/* NONE */' >> "$output_objdir/$dlsyms"
- fi
-
- $echo >> "$output_objdir/$dlsyms" "\
-
-#undef lt_preloaded_symbols
-
-#if defined (__STDC__) && __STDC__
-# define lt_ptr void *
-#else
-# define lt_ptr char *
-# define const
-#endif
-
-/* The mapping between symbol names and symbols. */
-"
-
- case $host in
- *cygwin* | *mingw* )
- $echo >> "$output_objdir/$dlsyms" "\
-/* DATA imports from DLLs on WIN32 can't be const, because
- runtime relocations are performed -- see ld's documentation
- on pseudo-relocs */
-struct {
-"
- ;;
- * )
- $echo >> "$output_objdir/$dlsyms" "\
-const struct {
-"
- ;;
- esac
-
-
- $echo >> "$output_objdir/$dlsyms" "\
- const char *name;
- lt_ptr address;
-}
-lt_preloaded_symbols[] =
-{\
-"
-
- eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$dlsyms"
-
- $echo >> "$output_objdir/$dlsyms" "\
- {0, (lt_ptr) 0}
-};
-
-/* This works around a problem in FreeBSD linker */
-#ifdef FREEBSD_WORKAROUND
-static const void *lt_preloaded_setup() {
- return lt_preloaded_symbols;
-}
-#endif
-
-#ifdef __cplusplus
-}
-#endif\
-"
- fi
-
- pic_flag_for_symtable=
- case $host in
- # compiling the symbol table file with pic_flag works around
- # a FreeBSD bug that causes programs to crash when -lm is
- # linked before any other PIC object. But we must not use
- # pic_flag when linking with -static. The problem exists in
- # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
- *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
- case "$compile_command " in
- *" -static "*) ;;
- *) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND";;
- esac;;
- *-*-hpux*)
- case "$compile_command " in
- *" -static "*) ;;
- *) pic_flag_for_symtable=" $pic_flag";;
- esac
- esac
-
- # Now compile the dynamic symbol file.
- $show "(cd $output_objdir && $LTCC $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")"
- $run eval '(cd $output_objdir && $LTCC $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $?
-
- # Clean up the generated files.
- $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T"
- $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T"
-
- # Transform the symbol file into the correct name.
- case $host in
- *cygwin* | *mingw* )
- if test -f "$output_objdir/${outputname}.def" ; then
- compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%" | $NL2SP`
- finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%" | $NL2SP`
- else
- compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
- finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
- fi
- ;;
- * )
- compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
- finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
- ;;
- esac
- ;;
- *-*-freebsd*)
- # FreeBSD doesn't need this...
- ;;
- *)
- $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
- else
- # We keep going just in case the user didn't refer to
- # lt_preloaded_symbols. The linker will fail if global_symbol_pipe
- # really was required.
-
- # Nullify the symbol file.
- compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s% @SYMFILE@%%" | $NL2SP`
- finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s% @SYMFILE@%%" | $NL2SP`
- fi
-
- if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
- # Replace the output file specification.
- compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e 's%@OUTPUT@%'"$output"'%g' | $NL2SP`
- link_command="$compile_command$compile_rpath"
-
- # We have no uninstalled library dependencies, so finalize right now.
- $show "$link_command"
- $run eval "$link_command"
- exit_status=$?
-
- # Delete the generated files.
- if test -n "$dlsyms"; then
- $show "$rm $output_objdir/${outputname}S.${objext}"
- $run $rm "$output_objdir/${outputname}S.${objext}"
- fi
-
- exit $exit_status
- fi
-
- if test -n "$shlibpath_var"; then
- # We should set the shlibpath_var
- rpath=
- for dir in $temp_rpath; do
- case $dir in
- [\\/]* | [A-Za-z]:[\\/]*)
- # Absolute path.
- rpath="$rpath$dir:"
- ;;
- *)
- # Relative path: add a thisdir entry.
- rpath="$rpath\$thisdir/$dir:"
- ;;
- esac
- done
- temp_rpath="$rpath"
- fi
-
- if test -n "$compile_shlibpath$finalize_shlibpath"; then
- compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
- fi
- if test -n "$finalize_shlibpath"; then
- finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
- fi
-
- compile_var=
- finalize_var=
- if test -n "$runpath_var"; then
- if test -n "$perm_rpath"; then
- # We should set the runpath_var.
- rpath=
- for dir in $perm_rpath; do
- rpath="$rpath$dir:"
- done
- compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
- fi
- if test -n "$finalize_perm_rpath"; then
- # We should set the runpath_var.
- rpath=
- for dir in $finalize_perm_rpath; do
- rpath="$rpath$dir:"
- done
- finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
- fi
- fi
-
- if test "$no_install" = yes; then
- # We don't need to create a wrapper script.
- link_command="$compile_var$compile_command$compile_rpath"
- # Replace the output file specification.
- link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
- # Delete the old output file.
- $run $rm $output
- # Link the executable and exit
- $show "$link_command"
- $run eval "$link_command" || exit $?
- exit $EXIT_SUCCESS
- fi
-
- if test "$hardcode_action" = relink; then
- # Fast installation is not supported
- link_command="$compile_var$compile_command$compile_rpath"
- relink_command="$finalize_var$finalize_command$finalize_rpath"
-
- $echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2
- $echo "$modename: \`$output' will be relinked during installation" 1>&2
- else
- if test "$fast_install" != no; then
- link_command="$finalize_var$compile_command$finalize_rpath"
- if test "$fast_install" = yes; then
- relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $SP2NL | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g' | $NL2SP`
- else
- # fast_install is set to needless
- relink_command=
- fi
- else
- link_command="$compile_var$compile_command$compile_rpath"
- relink_command="$finalize_var$finalize_command$finalize_rpath"
- fi
- fi
-
- # Replace the output file specification.
- link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
-
- # Delete the old output files.
- $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname
-
- $show "$link_command"
- $run eval "$link_command" || exit $?
-
- # Now create the wrapper script.
- $show "creating $output"
-
- # Quote the relink command for shipping.
- if test -n "$relink_command"; then
- # Preserve any variables that may affect compiler behavior
- for var in $variables_saved_for_relink; do
- if eval test -z \"\${$var+set}\"; then
- relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
- elif eval var_value=\$$var; test -z "$var_value"; then
- relink_command="$var=; export $var; $relink_command"
- else
- var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
- relink_command="$var=\"$var_value\"; export $var; $relink_command"
- fi
- done
- relink_command="(cd `pwd`; $relink_command)"
- relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e "$sed_quote_subst" | $NL2SP`
- fi
-
- # Quote $echo for shipping.
- if test "X$echo" = "X$SHELL $progpath --fallback-echo"; then
- case $progpath in
- [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";;
- *) qecho="$SHELL `pwd`/$progpath --fallback-echo";;
- esac
- qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"`
- else
- qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"`
- fi
-
- # Only actually do things if our run command is non-null.
- if test -z "$run"; then
- # win32 will think the script is a binary if it has
- # a .exe suffix, so we strip it off here.
- case $output in
- *.exe) output=`$echo $output|${SED} 's,.exe$,,'` ;;
- esac
- # test for cygwin because mv fails w/o .exe extensions
- case $host in
- *cygwin*)
- exeext=.exe
- outputname=`$echo $outputname|${SED} 's,.exe$,,'` ;;
- *) exeext= ;;
- esac
- case $host in
- *cygwin* | *mingw* )
- output_name=`basename $output`
- output_path=`dirname $output`
- cwrappersource="$output_path/$objdir/lt-$output_name.c"
- cwrapper="$output_path/$output_name.exe"
- $rm $cwrappersource $cwrapper
- trap "$rm $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
-
- cat > $cwrappersource <<EOF
-
-/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
- Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
-
- The $output program cannot be directly executed until all the libtool
- libraries that it depends on are installed.
-
- This wrapper executable should never be moved out of the build directory.
- If it is, it will not operate correctly.
-
- Currently, it simply execs the wrapper *script* "/bin/sh $output",
- but could eventually absorb all of the scripts functionality and
- exec $objdir/$outputname directly.
-*/
-EOF
- cat >> $cwrappersource<<"EOF"
-#include <stdio.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <malloc.h>
-#include <stdarg.h>
-#include <assert.h>
-#include <string.h>
-#include <ctype.h>
-#include <sys/stat.h>
-
-#if defined(PATH_MAX)
-# define LT_PATHMAX PATH_MAX
-#elif defined(MAXPATHLEN)
-# define LT_PATHMAX MAXPATHLEN
-#else
-# define LT_PATHMAX 1024
-#endif
-
-#ifndef DIR_SEPARATOR
-# define DIR_SEPARATOR '/'
-# define PATH_SEPARATOR ':'
-#endif
-
-#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
- defined (__OS2__)
-# define HAVE_DOS_BASED_FILE_SYSTEM
-# ifndef DIR_SEPARATOR_2
-# define DIR_SEPARATOR_2 '\\'
-# endif
-# ifndef PATH_SEPARATOR_2
-# define PATH_SEPARATOR_2 ';'
-# endif
-#endif
-
-#ifndef DIR_SEPARATOR_2
-# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
-#else /* DIR_SEPARATOR_2 */
-# define IS_DIR_SEPARATOR(ch) \
- (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
-#endif /* DIR_SEPARATOR_2 */
-
-#ifndef PATH_SEPARATOR_2
-# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
-#else /* PATH_SEPARATOR_2 */
-# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
-#endif /* PATH_SEPARATOR_2 */
-
-#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type)))
-#define XFREE(stale) do { \
- if (stale) { free ((void *) stale); stale = 0; } \
-} while (0)
-
-/* -DDEBUG is fairly common in CFLAGS. */
-#undef DEBUG
-#if defined DEBUGWRAPPER
-# define DEBUG(format, ...) fprintf(stderr, format, __VA_ARGS__)
-#else
-# define DEBUG(format, ...)
-#endif
-
-const char *program_name = NULL;
-
-void * xmalloc (size_t num);
-char * xstrdup (const char *string);
-const char * base_name (const char *name);
-char * find_executable(const char *wrapper);
-int check_executable(const char *path);
-char * strendzap(char *str, const char *pat);
-void lt_fatal (const char *message, ...);
-
-int
-main (int argc, char *argv[])
-{
- char **newargz;
- int i;
-
- program_name = (char *) xstrdup (base_name (argv[0]));
- DEBUG("(main) argv[0] : %s\n",argv[0]);
- DEBUG("(main) program_name : %s\n",program_name);
- newargz = XMALLOC(char *, argc+2);
-EOF
-
- cat >> $cwrappersource <<EOF
- newargz[0] = (char *) xstrdup("$SHELL");
-EOF
-
- cat >> $cwrappersource <<"EOF"
- newargz[1] = find_executable(argv[0]);
- if (newargz[1] == NULL)
- lt_fatal("Couldn't find %s", argv[0]);
- DEBUG("(main) found exe at : %s\n",newargz[1]);
- /* we know the script has the same name, without the .exe */
- /* so make sure newargz[1] doesn't end in .exe */
- strendzap(newargz[1],".exe");
- for (i = 1; i < argc; i++)
- newargz[i+1] = xstrdup(argv[i]);
- newargz[argc+1] = NULL;
-
- for (i=0; i<argc+1; i++)
- {
- DEBUG("(main) newargz[%d] : %s\n",i,newargz[i]);
- ;
- }
-
-EOF
-
- case $host_os in
- mingw*)
- cat >> $cwrappersource <<EOF
- execv("$SHELL",(char const **)newargz);
-EOF
- ;;
- *)
- cat >> $cwrappersource <<EOF
- execv("$SHELL",newargz);
-EOF
- ;;
- esac
-
- cat >> $cwrappersource <<"EOF"
- return 127;
-}
-
-void *
-xmalloc (size_t num)
-{
- void * p = (void *) malloc (num);
- if (!p)
- lt_fatal ("Memory exhausted");
-
- return p;
-}
-
-char *
-xstrdup (const char *string)
-{
- return string ? strcpy ((char *) xmalloc (strlen (string) + 1), string) : NULL
-;
-}
-
-const char *
-base_name (const char *name)
-{
- const char *base;
-
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
- /* Skip over the disk name in MSDOS pathnames. */
- if (isalpha ((unsigned char)name[0]) && name[1] == ':')
- name += 2;
-#endif
-
- for (base = name; *name; name++)
- if (IS_DIR_SEPARATOR (*name))
- base = name + 1;
- return base;
-}
-
-int
-check_executable(const char * path)
-{
- struct stat st;
-
- DEBUG("(check_executable) : %s\n", path ? (*path ? path : "EMPTY!") : "NULL!");
- if ((!path) || (!*path))
- return 0;
-
- if ((stat (path, &st) >= 0) &&
- (
- /* MinGW & native WIN32 do not support S_IXOTH or S_IXGRP */
-#if defined (S_IXOTH)
- ((st.st_mode & S_IXOTH) == S_IXOTH) ||
-#endif
-#if defined (S_IXGRP)
- ((st.st_mode & S_IXGRP) == S_IXGRP) ||
-#endif
- ((st.st_mode & S_IXUSR) == S_IXUSR))
- )
- return 1;
- else
- return 0;
-}
-
-/* Searches for the full path of the wrapper. Returns
- newly allocated full path name if found, NULL otherwise */
-char *
-find_executable (const char* wrapper)
-{
- int has_slash = 0;
- const char* p;
- const char* p_next;
- /* static buffer for getcwd */
- char tmp[LT_PATHMAX + 1];
- int tmp_len;
- char* concat_name;
-
- DEBUG("(find_executable) : %s\n", wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!");
-
- if ((wrapper == NULL) || (*wrapper == '\0'))
- return NULL;
-
- /* Absolute path? */
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
- if (isalpha ((unsigned char)wrapper[0]) && wrapper[1] == ':')
- {
- concat_name = xstrdup (wrapper);
- if (check_executable(concat_name))
- return concat_name;
- XFREE(concat_name);
- }
- else
- {
-#endif
- if (IS_DIR_SEPARATOR (wrapper[0]))
- {
- concat_name = xstrdup (wrapper);
- if (check_executable(concat_name))
- return concat_name;
- XFREE(concat_name);
- }
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
- }
-#endif
-
- for (p = wrapper; *p; p++)
- if (*p == '/')
- {
- has_slash = 1;
- break;
- }
- if (!has_slash)
- {
- /* no slashes; search PATH */
- const char* path = getenv ("PATH");
- if (path != NULL)
- {
- for (p = path; *p; p = p_next)
- {
- const char* q;
- size_t p_len;
- for (q = p; *q; q++)
- if (IS_PATH_SEPARATOR(*q))
- break;
- p_len = q - p;
- p_next = (*q == '\0' ? q : q + 1);
- if (p_len == 0)
- {
- /* empty path: current directory */
- if (getcwd (tmp, LT_PATHMAX) == NULL)
- lt_fatal ("getcwd failed");
- tmp_len = strlen(tmp);
- concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1);
- memcpy (concat_name, tmp, tmp_len);
- concat_name[tmp_len] = '/';
- strcpy (concat_name + tmp_len + 1, wrapper);
- }
- else
- {
- concat_name = XMALLOC(char, p_len + 1 + strlen(wrapper) + 1);
- memcpy (concat_name, p, p_len);
- concat_name[p_len] = '/';
- strcpy (concat_name + p_len + 1, wrapper);
- }
- if (check_executable(concat_name))
- return concat_name;
- XFREE(concat_name);
- }
- }
- /* not found in PATH; assume curdir */
- }
- /* Relative path | not found in path: prepend cwd */
- if (getcwd (tmp, LT_PATHMAX) == NULL)
- lt_fatal ("getcwd failed");
- tmp_len = strlen(tmp);
- concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1);
- memcpy (concat_name, tmp, tmp_len);
- concat_name[tmp_len] = '/';
- strcpy (concat_name + tmp_len + 1, wrapper);
-
- if (check_executable(concat_name))
- return concat_name;
- XFREE(concat_name);
- return NULL;
-}
-
-char *
-strendzap(char *str, const char *pat)
-{
- size_t len, patlen;
-
- assert(str != NULL);
- assert(pat != NULL);
-
- len = strlen(str);
- patlen = strlen(pat);
-
- if (patlen <= len)
- {
- str += len - patlen;
- if (strcmp(str, pat) == 0)
- *str = '\0';
- }
- return str;
-}
-
-static void
-lt_error_core (int exit_status, const char * mode,
- const char * message, va_list ap)
-{
- fprintf (stderr, "%s: %s: ", program_name, mode);
- vfprintf (stderr, message, ap);
- fprintf (stderr, ".\n");
-
- if (exit_status >= 0)
- exit (exit_status);
-}
-
-void
-lt_fatal (const char *message, ...)
-{
- va_list ap;
- va_start (ap, message);
- lt_error_core (EXIT_FAILURE, "FATAL", message, ap);
- va_end (ap);
-}
-EOF
- # we should really use a build-platform specific compiler
- # here, but OTOH, the wrappers (shell script and this C one)
- # are only useful if you want to execute the "real" binary.
- # Since the "real" binary is built for $host, then this
- # wrapper might as well be built for $host, too.
- $run $LTCC $LTCFLAGS -s -o $cwrapper $cwrappersource
- ;;
- esac
- $rm $output
- trap "$rm $output; exit $EXIT_FAILURE" 1 2 15
-
- $echo > $output "\
-#! $SHELL
-
-# $output - temporary wrapper script for $objdir/$outputname
-# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
-#
-# The $output program cannot be directly executed until all the libtool
-# libraries that it depends on are installed.
-#
-# This wrapper script should never be moved out of the build directory.
-# If it is, it will not operate correctly.
-
-# Sed substitution that helps us do robust quoting. It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed='${SED} -e 1s/^X//'
-sed_quote_subst='$sed_quote_subst'
-
-# Be Bourne compatible (taken from Autoconf:_AS_BOURNE_COMPATIBLE).
-if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
- emulate sh
- NULLCMD=:
- # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '\${1+\"\$@\"}'='\"\$@\"'
- setopt NO_GLOB_SUBST
-else
- case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
-fi
-BIN_SH=xpg4; export BIN_SH # for Tru64
-DUALCASE=1; export DUALCASE # for MKS sh
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-relink_command=\"$relink_command\"
-
-# This environment variable determines our operation mode.
-if test \"\$libtool_install_magic\" = \"$magic\"; then
- # install mode needs the following variable:
- notinst_deplibs='$notinst_deplibs'
-else
- # When we are sourced in execute mode, \$file and \$echo are already set.
- if test \"\$libtool_execute_magic\" != \"$magic\"; then
- echo=\"$qecho\"
- file=\"\$0\"
- # Make sure echo works.
- if test \"X\$1\" = X--no-reexec; then
- # Discard the --no-reexec flag, and continue.
- shift
- elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then
- # Yippee, \$echo works!
- :
- else
- # Restart under the correct shell, and then maybe \$echo will work.
- exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
- fi
- fi\
-"
- $echo >> $output "\
-
- # Find the directory that this script lives in.
- thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
- test \"x\$thisdir\" = \"x\$file\" && thisdir=.
-
- # Follow symbolic links until we get to the real thisdir.
- file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\`
- while test -n \"\$file\"; do
- destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
-
- # If there was a directory component, then change thisdir.
- if test \"x\$destdir\" != \"x\$file\"; then
- case \"\$destdir\" in
- [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
- *) thisdir=\"\$thisdir/\$destdir\" ;;
- esac
- fi
-
- file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
- file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`
- done
-
- # Try to get the absolute directory name.
- absdir=\`cd \"\$thisdir\" && pwd\`
- test -n \"\$absdir\" && thisdir=\"\$absdir\"
-"
-
- if test "$fast_install" = yes; then
- $echo >> $output "\
- program=lt-'$outputname'$exeext
- progdir=\"\$thisdir/$objdir\"
-
- if test ! -f \"\$progdir/\$program\" || \\
- { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
- test \"X\$file\" != \"X\$progdir/\$program\"; }; then
-
- file=\"\$\$-\$program\"
-
- if test ! -d \"\$progdir\"; then
- $mkdir \"\$progdir\"
- else
- $rm \"\$progdir/\$file\"
- fi"
-
- $echo >> $output "\
-
- # relink executable if necessary
- if test -n \"\$relink_command\"; then
- if relink_command_output=\`eval \$relink_command 2>&1\`; then :
- else
- $echo \"\$relink_command_output\" >&2
- $rm \"\$progdir/\$file\"
- exit $EXIT_FAILURE
- fi
- fi
-
- $mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
- { $rm \"\$progdir/\$program\";
- $mv \"\$progdir/\$file\" \"\$progdir/\$program\"; }
- $rm \"\$progdir/\$file\"
- fi"
- else
- $echo >> $output "\
- program='$outputname'
- progdir=\"\$thisdir/$objdir\"
-"
- fi
-
- $echo >> $output "\
-
- if test -f \"\$progdir/\$program\"; then"
-
- # Export our shlibpath_var if we have one.
- if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
- $echo >> $output "\
- # Add our own library path to $shlibpath_var
- $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
-
- # Some systems cannot cope with colon-terminated $shlibpath_var
- # The second colon is a workaround for a bug in BeOS R4 sed
- $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
-
- export $shlibpath_var
-"
- fi
-
- # fixup the dll searchpath if we need to.
- if test -n "$dllsearchpath"; then
- $echo >> $output "\
- # Add the dll search path components to the executable PATH
- PATH=$dllsearchpath:\$PATH
-"
- fi
-
- $echo >> $output "\
- if test \"\$libtool_execute_magic\" != \"$magic\"; then
- # Run the actual program with our arguments.
-"
- case $host in
- # Backslashes separate directories on plain windows
- *-*-mingw | *-*-os2*)
- $echo >> $output "\
- exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
-"
- ;;
-
- *)
- $echo >> $output "\
- exec \"\$progdir/\$program\" \${1+\"\$@\"}
-"
- ;;
- esac
- $echo >> $output "\
- \$echo \"\$0: cannot exec \$program \$*\"
- exit $EXIT_FAILURE
- fi
- else
- # The program doesn't exist.
- \$echo \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
- \$echo \"This script is just a wrapper for \$program.\" 1>&2
- $echo \"See the $PACKAGE documentation for more information.\" 1>&2
- exit $EXIT_FAILURE
- fi
-fi\
-"
- chmod +x $output
- fi
- exit $EXIT_SUCCESS
- ;;
- esac
-
- # See if we need to build an old-fashioned archive.
- for oldlib in $oldlibs; do
-
- if test "$build_libtool_libs" = convenience; then
- oldobjs="$libobjs_save"
- addlibs="$convenience"
- build_libtool_libs=no
- else
- if test "$build_libtool_libs" = module; then
- oldobjs="$libobjs_save"
- build_libtool_libs=no
- else
- oldobjs="$old_deplibs $non_pic_objects"
- fi
- addlibs="$old_convenience"
- fi
-
- if test -n "$addlibs"; then
- gentop="$output_objdir/${outputname}x"
- generated="$generated $gentop"
-
- func_extract_archives $gentop $addlibs
- oldobjs="$oldobjs $func_extract_archives_result"
- fi
-
- # Do each command in the archive commands.
- if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
- cmds=$old_archive_from_new_cmds
- else
- # POSIX demands no paths to be encoded in archives. We have
- # to avoid creating archives with duplicate basenames if we
- # might have to extract them afterwards, e.g., when creating a
- # static archive out of a convenience library, or when linking
- # the entirety of a libtool archive into another (currently
- # not supported by libtool).
- if (for obj in $oldobjs
- do
- $echo "X$obj" | $Xsed -e 's%^.*/%%'
- done | sort | sort -uc >/dev/null 2>&1); then
- :
- else
- $echo "copying selected object files to avoid basename conflicts..."
-
- if test -z "$gentop"; then
- gentop="$output_objdir/${outputname}x"
- generated="$generated $gentop"
-
- $show "${rm}r $gentop"
- $run ${rm}r "$gentop"
- $show "$mkdir $gentop"
- $run $mkdir "$gentop"
- exit_status=$?
- if test "$exit_status" -ne 0 && test ! -d "$gentop"; then
- exit $exit_status
- fi
- fi
-
- save_oldobjs=$oldobjs
- oldobjs=
- counter=1
- for obj in $save_oldobjs
- do
- objbase=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
- case " $oldobjs " in
- " ") oldobjs=$obj ;;
- *[\ /]"$objbase "*)
- while :; do
- # Make sure we don't pick an alternate name that also
- # overlaps.
- newobj=lt$counter-$objbase
- counter=`expr $counter + 1`
- case " $oldobjs " in
- *[\ /]"$newobj "*) ;;
- *) if test ! -f "$gentop/$newobj"; then break; fi ;;
- esac
- done
- $show "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
- $run ln "$obj" "$gentop/$newobj" ||
- $run cp "$obj" "$gentop/$newobj"
- oldobjs="$oldobjs $gentop/$newobj"
- ;;
- *) oldobjs="$oldobjs $obj" ;;
- esac
- done
- fi
-
- eval cmds=\"$old_archive_cmds\"
-
- if len=`expr "X$cmds" : ".*"` &&
- test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
- cmds=$old_archive_cmds
- else
- # the command line is too long to link in one step, link in parts
- $echo "using piecewise archive linking..."
- save_RANLIB=$RANLIB
- RANLIB=:
- objlist=
- concat_cmds=
- save_oldobjs=$oldobjs
-
- # Is there a better way of finding the last object in the list?
- for obj in $save_oldobjs
- do
- last_oldobj=$obj
- done
- for obj in $save_oldobjs
- do
- oldobjs="$objlist $obj"
- objlist="$objlist $obj"
- eval test_cmds=\"$old_archive_cmds\"
- if len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
- test "$len" -le "$max_cmd_len"; then
- :
- else
- # the above command should be used before it gets too long
- oldobjs=$objlist
- if test "$obj" = "$last_oldobj" ; then
- RANLIB=$save_RANLIB
- fi
- test -z "$concat_cmds" || concat_cmds=$concat_cmds~
- eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
- objlist=
- fi
- done
- RANLIB=$save_RANLIB
- oldobjs=$objlist
- if test "X$oldobjs" = "X" ; then
- eval cmds=\"\$concat_cmds\"
- else
- eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
- fi
- fi
- fi
- save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- eval cmd=\"$cmd\"
- IFS="$save_ifs"
- $show "$cmd"
- $run eval "$cmd" || exit $?
- done
- IFS="$save_ifs"
- done
-
- if test -n "$generated"; then
- $show "${rm}r$generated"
- $run ${rm}r$generated
- fi
-
- # Now create the libtool archive.
- case $output in
- *.la)
- old_library=
- test "$build_old_libs" = yes && old_library="$libname.$libext"
- $show "creating $output"
-
- # Preserve any variables that may affect compiler behavior
- for var in $variables_saved_for_relink; do
- if eval test -z \"\${$var+set}\"; then
- relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
- elif eval var_value=\$$var; test -z "$var_value"; then
- relink_command="$var=; export $var; $relink_command"
- else
- var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
- relink_command="$var=\"$var_value\"; export $var; $relink_command"
- fi
- done
- # Quote the link command for shipping.
- relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
- relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e "$sed_quote_subst" | $NL2SP`
- if test "$hardcode_automatic" = yes ; then
- relink_command=
- fi
-
-
- # Only create the output if not a dry run.
- if test -z "$run"; then
- for installed in no yes; do
- if test "$installed" = yes; then
- if test -z "$install_libdir"; then
- break
- fi
- output="$output_objdir/$outputname"i
- # Replace all uninstalled libtool libraries with the installed ones
- newdependency_libs=
- for deplib in $dependency_libs; do
- case $deplib in
- *.la)
- name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'`
- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
- if test -z "$libdir"; then
- $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
- exit $EXIT_FAILURE
- fi
- newdependency_libs="$newdependency_libs $libdir/$name"
- ;;
- *) newdependency_libs="$newdependency_libs $deplib" ;;
- esac
- done
- dependency_libs="$newdependency_libs"
- newdlfiles=
- for lib in $dlfiles; do
- name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
- if test -z "$libdir"; then
- $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
- exit $EXIT_FAILURE
- fi
- newdlfiles="$newdlfiles $libdir/$name"
- done
- dlfiles="$newdlfiles"
- newdlprefiles=
- for lib in $dlprefiles; do
- name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
- if test -z "$libdir"; then
- $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
- exit $EXIT_FAILURE
- fi
- newdlprefiles="$newdlprefiles $libdir/$name"
- done
- dlprefiles="$newdlprefiles"
- else
- newdlfiles=
- for lib in $dlfiles; do
- case $lib in
- [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
- *) abs=`pwd`"/$lib" ;;
- esac
- newdlfiles="$newdlfiles $abs"
- done
- dlfiles="$newdlfiles"
- newdlprefiles=
- for lib in $dlprefiles; do
- case $lib in
- [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
- *) abs=`pwd`"/$lib" ;;
- esac
- newdlprefiles="$newdlprefiles $abs"
- done
- dlprefiles="$newdlprefiles"
- fi
- $rm $output
- # place dlname in correct position for cygwin
- tdlname=$dlname
- case $host,$output,$installed,$module,$dlname in
- *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
- esac
- $echo > $output "\
-# $outputname - a libtool library file
-# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
-#
-# Please DO NOT delete this file!
-# It is necessary for linking the library.
-
-# The name that we can dlopen(3).
-dlname='$tdlname'
-
-# Names of this library.
-library_names='$library_names'
-
-# The name of the static archive.
-old_library='$old_library'
-
-# Libraries that this one depends upon.
-dependency_libs='$dependency_libs'
-
-# Version information for $libname.
-current=$current
-age=$age
-revision=$revision
-
-# Is this an already installed library?
-installed=$installed
-
-# Should we warn about portability when linking against -modules?
-shouldnotlink=$module
-
-# Files to dlopen/dlpreopen
-dlopen='$dlfiles'
-dlpreopen='$dlprefiles'
-
-# Directory that this library needs to be installed in:
-libdir='$install_libdir'"
- if test "$installed" = no && test "$need_relink" = yes; then
- $echo >> $output "\
-relink_command=\"$relink_command\""
- fi
- done
- fi
-
- # Do a symbolic link so that the libtool archive can be found in
- # LD_LIBRARY_PATH before the program is installed.
- $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)"
- $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $?
- ;;
- esac
- exit $EXIT_SUCCESS
- ;;
-
- # libtool install mode
- install)
- modename="$modename: install"
-
- # There may be an optional sh(1) argument at the beginning of
- # install_prog (especially on Windows NT).
- if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
- # Allow the use of GNU shtool's install command.
- $echo "X$nonopt" | grep shtool > /dev/null; then
- # Aesthetically quote it.
- arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"`
- case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- arg="\"$arg\""
- ;;
- esac
- install_prog="$arg "
- arg="$1"
- shift
- else
- install_prog=
- arg=$nonopt
- fi
-
- # The real first argument should be the name of the installation program.
- # Aesthetically quote it.
- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
- case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- arg="\"$arg\""
- ;;
- esac
- install_prog="$install_prog$arg"
-
- # We need to accept at least all the BSD install flags.
- dest=
- files=
- opts=
- prev=
- install_type=
- isdir=no
- stripme=
- for arg
- do
- if test -n "$dest"; then
- files="$files $dest"
- dest=$arg
- continue
- fi
-
- case $arg in
- -d) isdir=yes ;;
- -f)
- case " $install_prog " in
- *[\\\ /]cp\ *) ;;
- *) prev=$arg ;;
- esac
- ;;
- -g | -m | -o) prev=$arg ;;
- -s)
- stripme=" -s"
- continue
- ;;
- -*)
- ;;
- *)
- # If the previous option needed an argument, then skip it.
- if test -n "$prev"; then
- prev=
- else
- dest=$arg
- continue
- fi
- ;;
- esac
-
- # Aesthetically quote the argument.
- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
- case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- arg="\"$arg\""
- ;;
- esac
- install_prog="$install_prog $arg"
- done
-
- if test -z "$install_prog"; then
- $echo "$modename: you must specify an install program" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
-
- if test -n "$prev"; then
- $echo "$modename: the \`$prev' option requires an argument" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
-
- if test -z "$files"; then
- if test -z "$dest"; then
- $echo "$modename: no file or destination specified" 1>&2
- else
- $echo "$modename: you must specify a destination" 1>&2
- fi
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
-
- # Strip any trailing slash from the destination.
- dest=`$echo "X$dest" | $Xsed -e 's%/$%%'`
-
- # Check to see that the destination is a directory.
- test -d "$dest" && isdir=yes
- if test "$isdir" = yes; then
- destdir="$dest"
- destname=
- else
- destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'`
- test "X$destdir" = "X$dest" && destdir=.
- destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'`
-
- # Not a directory, so check to see that there is only one file specified.
- set dummy $files
- if test "$#" -gt 2; then
- $echo "$modename: \`$dest' is not a directory" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
- fi
- case $destdir in
- [\\/]* | [A-Za-z]:[\\/]*) ;;
- *)
- for file in $files; do
- case $file in
- *.lo) ;;
- *)
- $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
- done
- ;;
- esac
-
- # This variable tells wrapper scripts just to set variables rather
- # than running their programs.
- libtool_install_magic="$magic"
-
- staticlibs=
- future_libdirs=
- current_libdirs=
- for file in $files; do
-
- # Do each installation.
- case $file in
- *.$libext)
- # Do the static libraries later.
- staticlibs="$staticlibs $file"
- ;;
-
- *.la)
- # Check to see that this really is a libtool archive.
- if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
- else
- $echo "$modename: \`$file' is not a valid libtool archive" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
-
- library_names=
- old_library=
- relink_command=
- # If there is no directory component, then add one.
- case $file in
- */* | *\\*) . $file ;;
- *) . ./$file ;;
- esac
-
- # Add the libdir to current_libdirs if it is the destination.
- if test "X$destdir" = "X$libdir"; then
- case "$current_libdirs " in
- *" $libdir "*) ;;
- *) current_libdirs="$current_libdirs $libdir" ;;
- esac
- else
- # Note the libdir as a future libdir.
- case "$future_libdirs " in
- *" $libdir "*) ;;
- *) future_libdirs="$future_libdirs $libdir" ;;
- esac
- fi
-
- dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/
- test "X$dir" = "X$file/" && dir=
- dir="$dir$objdir"
-
- if test -n "$relink_command"; then
- # Determine the prefix the user has applied to our future dir.
- inst_prefix_dir=`$echo "$destdir" | $SED "s%$libdir\$%%"`
-
- # Don't allow the user to place us outside of our expected
- # location b/c this prevents finding dependent libraries that
- # are installed to the same prefix.
- # At present, this check doesn't affect windows .dll's that
- # are installed into $libdir/../bin (currently, that works fine)
- # but it's something to keep an eye on.
- if test "$inst_prefix_dir" = "$destdir"; then
- $echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2
- exit $EXIT_FAILURE
- fi
-
- if test -n "$inst_prefix_dir"; then
- # Stick the inst_prefix_dir data into the link command.
- relink_command=`$echo "$relink_command" | $SP2NL | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%" | $NL2SP`
- else
- relink_command=`$echo "$relink_command" | $SP2NL | $SED "s%@inst_prefix_dir@%%" | $NL2SP`
- fi
-
- $echo "$modename: warning: relinking \`$file'" 1>&2
- $show "$relink_command"
- if $run eval "$relink_command"; then :
- else
- $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
- exit $EXIT_FAILURE
- fi
- fi
-
- # See the names of the shared library.
- set dummy $library_names
- if test -n "$2"; then
- realname="$2"
- shift
- shift
-
- srcname="$realname"
- test -n "$relink_command" && srcname="$realname"T
-
- # Install the shared library and build the symlinks.
- $show "$install_prog $dir/$srcname $destdir/$realname"
- $run eval "$install_prog $dir/$srcname $destdir/$realname" || exit $?
- if test -n "$stripme" && test -n "$striplib"; then
- $show "$striplib $destdir/$realname"
- $run eval "$striplib $destdir/$realname" || exit $?
- fi
-
- if test "$#" -gt 0; then
- # Delete the old symlinks, and create new ones.
- # Try `ln -sf' first, because the `ln' binary might depend on
- # the symlink we replace! Solaris /bin/ln does not understand -f,
- # so we also need to try rm && ln -s.
- for linkname
- do
- if test "$linkname" != "$realname"; then
- $show "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })"
- $run eval "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })"
- fi
- done
- fi
-
- # Do each command in the postinstall commands.
- lib="$destdir/$realname"
- cmds=$postinstall_cmds
- save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- eval cmd=\"$cmd\"
- $show "$cmd"
- $run eval "$cmd" || {
- lt_exit=$?
-
- # Restore the uninstalled library and exit
- if test "$mode" = relink; then
- $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)'
- fi
-
- exit $lt_exit
- }
- done
- IFS="$save_ifs"
- fi
-
- # Install the pseudo-library for information purposes.
- name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
- instname="$dir/$name"i
- $show "$install_prog $instname $destdir/$name"
- $run eval "$install_prog $instname $destdir/$name" || exit $?
-
- # Maybe install the static library, too.
- test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
- ;;
-
- *.lo)
- # Install (i.e. copy) a libtool object.
-
- # Figure out destination file name, if it wasn't already specified.
- if test -n "$destname"; then
- destfile="$destdir/$destname"
- else
- destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
- destfile="$destdir/$destfile"
- fi
-
- # Deduce the name of the destination old-style object file.
- case $destfile in
- *.lo)
- staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"`
- ;;
- *.$objext)
- staticdest="$destfile"
- destfile=
- ;;
- *)
- $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
-
- # Install the libtool object if requested.
- if test -n "$destfile"; then
- $show "$install_prog $file $destfile"
- $run eval "$install_prog $file $destfile" || exit $?
- fi
-
- # Install the old object if enabled.
- if test "$build_old_libs" = yes; then
- # Deduce the name of the old-style object file.
- staticobj=`$echo "X$file" | $Xsed -e "$lo2o"`
-
- $show "$install_prog $staticobj $staticdest"
- $run eval "$install_prog \$staticobj \$staticdest" || exit $?
- fi
- exit $EXIT_SUCCESS
- ;;
-
- *)
- # Figure out destination file name, if it wasn't already specified.
- if test -n "$destname"; then
- destfile="$destdir/$destname"
- else
- destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
- destfile="$destdir/$destfile"
- fi
-
- # If the file is missing, and there is a .exe on the end, strip it
- # because it is most likely a libtool script we actually want to
- # install
- stripped_ext=""
- case $file in
- *.exe)
- if test ! -f "$file"; then
- file=`$echo $file|${SED} 's,.exe$,,'`
- stripped_ext=".exe"
- fi
- ;;
- esac
-
- # Do a test to see if this is really a libtool program.
- case $host in
- *cygwin*|*mingw*)
- wrapper=`$echo $file | ${SED} -e 's,.exe$,,'`
- ;;
- *)
- wrapper=$file
- ;;
- esac
- if (${SED} -e '4q' $wrapper | grep "^# Generated by .*$PACKAGE")>/dev/null 2>&1; then
- notinst_deplibs=
- relink_command=
-
- # Note that it is not necessary on cygwin/mingw to append a dot to
- # foo even if both foo and FILE.exe exist: automatic-append-.exe
- # behavior happens only for exec(3), not for open(2)! Also, sourcing
- # `FILE.' does not work on cygwin managed mounts.
- #
- # If there is no directory component, then add one.
- case $wrapper in
- */* | *\\*) . ${wrapper} ;;
- *) . ./${wrapper} ;;
- esac
-
- # Check the variables that should have been set.
- if test -z "$notinst_deplibs"; then
- $echo "$modename: invalid libtool wrapper script \`$wrapper'" 1>&2
- exit $EXIT_FAILURE
- fi
-
- finalize=yes
- for lib in $notinst_deplibs; do
- # Check to see that each library is installed.
- libdir=
- if test -f "$lib"; then
- # If there is no directory component, then add one.
- case $lib in
- */* | *\\*) . $lib ;;
- *) . ./$lib ;;
- esac
- fi
- libfile="$libdir/"`$echo "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test
- if test -n "$libdir" && test ! -f "$libfile"; then
- $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2
- finalize=no
- fi
- done
-
- relink_command=
- # Note that it is not necessary on cygwin/mingw to append a dot to
- # foo even if both foo and FILE.exe exist: automatic-append-.exe
- # behavior happens only for exec(3), not for open(2)! Also, sourcing
- # `FILE.' does not work on cygwin managed mounts.
- #
- # If there is no directory component, then add one.
- case $wrapper in
- */* | *\\*) . ${wrapper} ;;
- *) . ./${wrapper} ;;
- esac
-
- outputname=
- if test "$fast_install" = no && test -n "$relink_command"; then
- if test "$finalize" = yes && test -z "$run"; then
- tmpdir=`func_mktempdir`
- file=`$echo "X$file$stripped_ext" | $Xsed -e 's%^.*/%%'`
- outputname="$tmpdir/$file"
- # Replace the output file specification.
- relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g' | $NL2SP`
-
- $show "$relink_command"
- if $run eval "$relink_command"; then :
- else
- $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
- ${rm}r "$tmpdir"
- continue
- fi
- file="$outputname"
- else
- $echo "$modename: warning: cannot relink \`$file'" 1>&2
- fi
- else
- # Install the binary that we compiled earlier.
- file=`$echo "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
- fi
- fi
-
- # remove .exe since cygwin /usr/bin/install will append another
- # one anyway
- case $install_prog,$host in
- */usr/bin/install*,*cygwin*)
- case $file:$destfile in
- *.exe:*.exe)
- # this is ok
- ;;
- *.exe:*)
- destfile=$destfile.exe
- ;;
- *:*.exe)
- destfile=`$echo $destfile | ${SED} -e 's,.exe$,,'`
- ;;
- esac
- ;;
- esac
- $show "$install_prog$stripme $file $destfile"
- $run eval "$install_prog\$stripme \$file \$destfile" || exit $?
- test -n "$outputname" && ${rm}r "$tmpdir"
- ;;
- esac
- done
-
- for file in $staticlibs; do
- name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-
- # Set up the ranlib parameters.
- oldlib="$destdir/$name"
-
- $show "$install_prog $file $oldlib"
- $run eval "$install_prog \$file \$oldlib" || exit $?
-
- if test -n "$stripme" && test -n "$old_striplib"; then
- $show "$old_striplib $oldlib"
- $run eval "$old_striplib $oldlib" || exit $?
- fi
-
- # Do each command in the postinstall commands.
- cmds=$old_postinstall_cmds
- save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- eval cmd=\"$cmd\"
- $show "$cmd"
- $run eval "$cmd" || exit $?
- done
- IFS="$save_ifs"
- done
-
- if test -n "$future_libdirs"; then
- $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2
- fi
-
- if test -n "$current_libdirs"; then
- # Maybe just do a dry run.
- test -n "$run" && current_libdirs=" -n$current_libdirs"
- exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
- else
- exit $EXIT_SUCCESS
- fi
- ;;
-
- # libtool finish mode
- finish)
- modename="$modename: finish"
- libdirs="$nonopt"
- admincmds=
-
- if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
- for dir
- do
- libdirs="$libdirs $dir"
- done
-
- for libdir in $libdirs; do
- if test -n "$finish_cmds"; then
- # Do each command in the finish commands.
- cmds=$finish_cmds
- save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- eval cmd=\"$cmd\"
- $show "$cmd"
- $run eval "$cmd" || admincmds="$admincmds
- $cmd"
- done
- IFS="$save_ifs"
- fi
- if test -n "$finish_eval"; then
- # Do the single finish_eval.
- eval cmds=\"$finish_eval\"
- $run eval "$cmds" || admincmds="$admincmds
- $cmds"
- fi
- done
- fi
-
- # Exit here if they wanted silent mode.
- test "$show" = : && exit $EXIT_SUCCESS
-
- $echo "X----------------------------------------------------------------------" | $Xsed
- $echo "Libraries have been installed in:"
- for libdir in $libdirs; do
- $echo " $libdir"
- done
- $echo
- $echo "If you ever happen to want to link against installed libraries"
- $echo "in a given directory, LIBDIR, you must either use libtool, and"
- $echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
- $echo "flag during linking and do at least one of the following:"
- if test -n "$shlibpath_var"; then
- $echo " - add LIBDIR to the \`$shlibpath_var' environment variable"
- $echo " during execution"
- fi
- if test -n "$runpath_var"; then
- $echo " - add LIBDIR to the \`$runpath_var' environment variable"
- $echo " during linking"
- fi
- if test -n "$hardcode_libdir_flag_spec"; then
- libdir=LIBDIR
- eval flag=\"$hardcode_libdir_flag_spec\"
-
- $echo " - use the \`$flag' linker flag"
- fi
- if test -n "$admincmds"; then
- $echo " - have your system administrator run these commands:$admincmds"
- fi
- if test -f /etc/ld.so.conf; then
- $echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
- fi
- $echo
- $echo "See any operating system documentation about shared libraries for"
- $echo "more information, such as the ld(1) and ld.so(8) manual pages."
- $echo "X----------------------------------------------------------------------" | $Xsed
- exit $EXIT_SUCCESS
- ;;
-
- # libtool execute mode
- execute)
- modename="$modename: execute"
-
- # The first argument is the command name.
- cmd="$nonopt"
- if test -z "$cmd"; then
- $echo "$modename: you must specify a COMMAND" 1>&2
- $echo "$help"
- exit $EXIT_FAILURE
- fi
-
- # Handle -dlopen flags immediately.
- for file in $execute_dlfiles; do
- if test ! -f "$file"; then
- $echo "$modename: \`$file' is not a file" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
-
- dir=
- case $file in
- *.la)
- # Check to see that this really is a libtool archive.
- if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
- else
- $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
-
- # Read the libtool library.
- dlname=
- library_names=
-
- # If there is no directory component, then add one.
- case $file in
- */* | *\\*) . $file ;;
- *) . ./$file ;;
- esac
-
- # Skip this library if it cannot be dlopened.
- if test -z "$dlname"; then
- # Warn if it was a shared library.
- test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'"
- continue
- fi
-
- dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
- test "X$dir" = "X$file" && dir=.
-
- if test -f "$dir/$objdir/$dlname"; then
- dir="$dir/$objdir"
- else
- if test ! -f "$dir/$dlname"; then
- $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2
- exit $EXIT_FAILURE
- fi
- fi
- ;;
-
- *.lo)
- # Just add the directory containing the .lo file.
- dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
- test "X$dir" = "X$file" && dir=.
- ;;
-
- *)
- $echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2
- continue
- ;;
- esac
-
- # Get the absolute pathname.
- absdir=`cd "$dir" && pwd`
- test -n "$absdir" && dir="$absdir"
-
- # Now add the directory to shlibpath_var.
- if eval "test -z \"\$$shlibpath_var\""; then
- eval "$shlibpath_var=\"\$dir\""
- else
- eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
- fi
- done
-
- # This variable tells wrapper scripts just to set shlibpath_var
- # rather than running their programs.
- libtool_execute_magic="$magic"
-
- # Check if any of the arguments is a wrapper script.
- args=
- for file
- do
- case $file in
- -*) ;;
- *)
- # Do a test to see if this is really a libtool program.
- if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
- # If there is no directory component, then add one.
- case $file in
- */* | *\\*) . $file ;;
- *) . ./$file ;;
- esac
-
- # Transform arg to wrapped name.
- file="$progdir/$program"
- fi
- ;;
- esac
- # Quote arguments (to preserve shell metacharacters).
- file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"`
- args="$args \"$file\""
- done
-
- if test -z "$run"; then
- if test -n "$shlibpath_var"; then
- # Export the shlibpath_var.
- eval "export $shlibpath_var"
- fi
-
- # Restore saved environment variables
- for lt_var in LANG LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
- do
- eval "if test \"\${save_$lt_var+set}\" = set; then
- $lt_var=\$save_$lt_var; export $lt_var
- fi"
- done
-
- # Now prepare to actually exec the command.
- exec_cmd="\$cmd$args"
- else
- # Display what would be done.
- if test -n "$shlibpath_var"; then
- eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\""
- $echo "export $shlibpath_var"
- fi
- $echo "$cmd$args"
- exit $EXIT_SUCCESS
- fi
- ;;
-
- # libtool clean and uninstall mode
- clean | uninstall)
- modename="$modename: $mode"
- rm="$nonopt"
- files=
- rmforce=
- exit_status=0
-
- # This variable tells wrapper scripts just to set variables rather
- # than running their programs.
- libtool_install_magic="$magic"
-
- for arg
- do
- case $arg in
- -f) rm="$rm $arg"; rmforce=yes ;;
- -*) rm="$rm $arg" ;;
- *) files="$files $arg" ;;
- esac
- done
-
- if test -z "$rm"; then
- $echo "$modename: you must specify an RM program" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
-
- rmdirs=
-
- origobjdir="$objdir"
- for file in $files; do
- dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
- if test "X$dir" = "X$file"; then
- dir=.
- objdir="$origobjdir"
- else
- objdir="$dir/$origobjdir"
- fi
- name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
- test "$mode" = uninstall && objdir="$dir"
-
- # Remember objdir for removal later, being careful to avoid duplicates
- if test "$mode" = clean; then
- case " $rmdirs " in
- *" $objdir "*) ;;
- *) rmdirs="$rmdirs $objdir" ;;
- esac
- fi
-
- # Don't error if the file doesn't exist and rm -f was used.
- if (test -L "$file") >/dev/null 2>&1 \
- || (test -h "$file") >/dev/null 2>&1 \
- || test -f "$file"; then
- :
- elif test -d "$file"; then
- exit_status=1
- continue
- elif test "$rmforce" = yes; then
- continue
- fi
-
- rmfiles="$file"
-
- case $name in
- *.la)
- # Possibly a libtool archive, so verify it.
- if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
- . $dir/$name
-
- # Delete the libtool libraries and symlinks.
- for n in $library_names; do
- rmfiles="$rmfiles $objdir/$n"
- done
- test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library"
-
- case "$mode" in
- clean)
- case " $library_names " in
- # " " in the beginning catches empty $dlname
- *" $dlname "*) ;;
- *) rmfiles="$rmfiles $objdir/$dlname" ;;
- esac
- test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
- ;;
- uninstall)
- if test -n "$library_names"; then
- # Do each command in the postuninstall commands.
- cmds=$postuninstall_cmds
- save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- eval cmd=\"$cmd\"
- $show "$cmd"
- $run eval "$cmd"
- if test "$?" -ne 0 && test "$rmforce" != yes; then
- exit_status=1
- fi
- done
- IFS="$save_ifs"
- fi
-
- if test -n "$old_library"; then
- # Do each command in the old_postuninstall commands.
- cmds=$old_postuninstall_cmds
- save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- eval cmd=\"$cmd\"
- $show "$cmd"
- $run eval "$cmd"
- if test "$?" -ne 0 && test "$rmforce" != yes; then
- exit_status=1
- fi
- done
- IFS="$save_ifs"
- fi
- # FIXME: should reinstall the best remaining shared library.
- ;;
- esac
- fi
- ;;
-
- *.lo)
- # Possibly a libtool object, so verify it.
- if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-
- # Read the .lo file
- . $dir/$name
-
- # Add PIC object to the list of files to remove.
- if test -n "$pic_object" \
- && test "$pic_object" != none; then
- rmfiles="$rmfiles $dir/$pic_object"
- fi
-
- # Add non-PIC object to the list of files to remove.
- if test -n "$non_pic_object" \
- && test "$non_pic_object" != none; then
- rmfiles="$rmfiles $dir/$non_pic_object"
- fi
- fi
- ;;
-
- *)
- if test "$mode" = clean ; then
- noexename=$name
- case $file in
- *.exe)
- file=`$echo $file|${SED} 's,.exe$,,'`
- noexename=`$echo $name|${SED} 's,.exe$,,'`
- # $file with .exe has already been added to rmfiles,
- # add $file without .exe
- rmfiles="$rmfiles $file"
- ;;
- esac
- # Do a test to see if this is a libtool program.
- if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
- relink_command=
- . $dir/$noexename
-
- # note $name still contains .exe if it was in $file originally
- # as does the version of $file that was added into $rmfiles
- rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}"
- if test "$fast_install" = yes && test -n "$relink_command"; then
- rmfiles="$rmfiles $objdir/lt-$name"
- fi
- if test "X$noexename" != "X$name" ; then
- rmfiles="$rmfiles $objdir/lt-${noexename}.c"
- fi
- fi
- fi
- ;;
- esac
- $show "$rm $rmfiles"
- $run $rm $rmfiles || exit_status=1
- done
- objdir="$origobjdir"
-
- # Try to remove the ${objdir}s in the directories where we deleted files
- for dir in $rmdirs; do
- if test -d "$dir"; then
- $show "rmdir $dir"
- $run rmdir $dir >/dev/null 2>&1
- fi
- done
-
- exit $exit_status
- ;;
-
- "")
- $echo "$modename: you must specify a MODE" 1>&2
- $echo "$generic_help" 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
-
- if test -z "$exec_cmd"; then
- $echo "$modename: invalid operation mode \`$mode'" 1>&2
- $echo "$generic_help" 1>&2
- exit $EXIT_FAILURE
- fi
-fi # test -z "$show_help"
-
-if test -n "$exec_cmd"; then
- eval exec $exec_cmd
- exit $EXIT_FAILURE
-fi
-
-# We need to display help for each of the modes.
-case $mode in
-"") $echo \
-"Usage: $modename [OPTION]... [MODE-ARG]...
-
-Provide generalized library-building support services.
-
- --config show all configuration variables
- --debug enable verbose shell tracing
--n, --dry-run display commands without modifying any files
- --features display basic configuration information and exit
- --finish same as \`--mode=finish'
- --help display this help message and exit
- --mode=MODE use operation mode MODE [default=inferred from MODE-ARGS]
- --quiet same as \`--silent'
- --silent don't print informational messages
- --tag=TAG use configuration variables from tag TAG
- --version print version information
-
-MODE must be one of the following:
-
- clean remove files from the build directory
- compile compile a source file into a libtool object
- execute automatically set library path, then run a program
- finish complete the installation of libtool libraries
- install install libraries or executables
- link create a library or an executable
- uninstall remove libraries from an installed directory
-
-MODE-ARGS vary depending on the MODE. Try \`$modename --help --mode=MODE' for
-a more detailed description of MODE.
-
-Report bugs to <bug-libtool at gnu.org>."
- exit $EXIT_SUCCESS
- ;;
-
-clean)
- $echo \
-"Usage: $modename [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
-
-Remove files from the build directory.
-
-RM is the name of the program to use to delete files associated with each FILE
-(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
-to RM.
-
-If FILE is a libtool library, object or program, all the files associated
-with it are deleted. Otherwise, only FILE itself is deleted using RM."
- ;;
-
-compile)
- $echo \
-"Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
-
-Compile a source file into a libtool library object.
-
-This mode accepts the following additional options:
-
- -o OUTPUT-FILE set the output file name to OUTPUT-FILE
- -prefer-pic try to building PIC objects only
- -prefer-non-pic try to building non-PIC objects only
- -static always build a \`.o' file suitable for static linking
-
-COMPILE-COMMAND is a command to be used in creating a \`standard' object file
-from the given SOURCEFILE.
-
-The output file name is determined by removing the directory component from
-SOURCEFILE, then substituting the C source code suffix \`.c' with the
-library object suffix, \`.lo'."
- ;;
-
-execute)
- $echo \
-"Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]...
-
-Automatically set library path, then run a program.
-
-This mode accepts the following additional options:
-
- -dlopen FILE add the directory containing FILE to the library path
-
-This mode sets the library path environment variable according to \`-dlopen'
-flags.
-
-If any of the ARGS are libtool executable wrappers, then they are translated
-into their corresponding uninstalled binary, and any of their required library
-directories are added to the library path.
-
-Then, COMMAND is executed, with ARGS as arguments."
- ;;
-
-finish)
- $echo \
-"Usage: $modename [OPTION]... --mode=finish [LIBDIR]...
-
-Complete the installation of libtool libraries.
-
-Each LIBDIR is a directory that contains libtool libraries.
-
-The commands that this mode executes may require superuser privileges. Use
-the \`--dry-run' option if you just want to see what would be executed."
- ;;
-
-install)
- $echo \
-"Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND...
-
-Install executables or libraries.
-
-INSTALL-COMMAND is the installation command. The first component should be
-either the \`install' or \`cp' program.
-
-The rest of the components are interpreted as arguments to that command (only
-BSD-compatible install options are recognized)."
- ;;
-
-link)
- $echo \
-"Usage: $modename [OPTION]... --mode=link LINK-COMMAND...
-
-Link object files or libraries together to form another library, or to
-create an executable program.
-
-LINK-COMMAND is a command using the C compiler that you would use to create
-a program from several object files.
-
-The following components of LINK-COMMAND are treated specially:
-
- -all-static do not do any dynamic linking at all
- -avoid-version do not add a version suffix if possible
- -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime
- -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols
- -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
- -export-symbols SYMFILE
- try to export only the symbols listed in SYMFILE
- -export-symbols-regex REGEX
- try to export only the symbols matching REGEX
- -LLIBDIR search LIBDIR for required installed libraries
- -lNAME OUTPUT-FILE requires the installed library libNAME
- -module build a library that can dlopened
- -no-fast-install disable the fast-install mode
- -no-install link a not-installable executable
- -no-undefined declare that a library does not refer to external symbols
- -o OUTPUT-FILE create OUTPUT-FILE from the specified objects
- -objectlist FILE Use a list of object files found in FILE to specify objects
- -precious-files-regex REGEX
- don't remove output files matching REGEX
- -release RELEASE specify package release information
- -rpath LIBDIR the created library will eventually be installed in LIBDIR
- -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries
- -static do not do any dynamic linking of uninstalled libtool libraries
- -static-libtool-libs
- do not do any dynamic linking of libtool libraries
- -version-info CURRENT[:REVISION[:AGE]]
- specify library version info [each variable defaults to 0]
-
-All other options (arguments beginning with \`-') are ignored.
-
-Every other argument is treated as a filename. Files ending in \`.la' are
-treated as uninstalled libtool libraries, other files are standard or library
-object files.
-
-If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
-only library objects (\`.lo' files) may be specified, and \`-rpath' is
-required, except when creating a convenience library.
-
-If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
-using \`ar' and \`ranlib', or on Windows using \`lib'.
-
-If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
-is created, otherwise an executable program is created."
- ;;
-
-uninstall)
- $echo \
-"Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
-
-Remove libraries from an installation directory.
-
-RM is the name of the program to use to delete files associated with each FILE
-(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
-to RM.
-
-If FILE is a libtool library, all the files associated with it are deleted.
-Otherwise, only FILE itself is deleted using RM."
- ;;
-
-*)
- $echo "$modename: invalid operation mode \`$mode'" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- ;;
-esac
-
-$echo
-$echo "Try \`$modename --help' for more information about other modes."
-
-exit $?
-
-# The TAGs below are defined such that we never get into a situation
-# in which we disable both kinds of libraries. Given conflicting
-# choices, we go for a static library, that is the most portable,
-# since we can't tell whether shared libraries were disabled because
-# the user asked for that or because the platform doesn't support
-# them. This is particularly important on AIX, because we don't
-# support having both static and shared libraries enabled at the same
-# time on that platform, so we default to a shared-only configuration.
-# If a disable-shared tag is given, we'll fallback to a static-only
-# configuration. But we'll never go from static-only to shared-only.
-
-# ### BEGIN LIBTOOL TAG CONFIG: disable-shared
-disable_libs=shared
-# ### END LIBTOOL TAG CONFIG: disable-shared
-
-# ### BEGIN LIBTOOL TAG CONFIG: disable-static
-disable_libs=static
-# ### END LIBTOOL TAG CONFIG: disable-static
-
-# Local Variables:
-# mode:shell-script
-# sh-indentation:2
-# End:
Copied: vendor/openbsm/1.2_alpha4/config/ltmain.sh (from rev 11163, vendor/openbsm/dist/config/ltmain.sh)
===================================================================
--- vendor/openbsm/1.2_alpha4/config/ltmain.sh (rev 0)
+++ vendor/openbsm/1.2_alpha4/config/ltmain.sh 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,9706 @@
+
+# libtool (GNU libtool) 2.4.2
+# Written by Gordon Matzigkeit <gord at gnu.ai.mit.edu>, 1996
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006,
+# 2007, 2008, 2009, 2010, 2011 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions. There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# GNU Libtool is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# As a special exception to the GNU General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU Libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING. If not, a copy
+# can be downloaded from http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+# Usage: $progname [OPTION]... [MODE-ARG]...
+#
+# Provide generalized library-building support services.
+#
+# --config show all configuration variables
+# --debug enable verbose shell tracing
+# -n, --dry-run display commands without modifying any files
+# --features display basic configuration information and exit
+# --mode=MODE use operation mode MODE
+# --preserve-dup-deps don't remove duplicate dependency libraries
+# --quiet, --silent don't print informational messages
+# --no-quiet, --no-silent
+# print informational messages (default)
+# --no-warn don't display warning messages
+# --tag=TAG use configuration variables from tag TAG
+# -v, --verbose print more informational messages than default
+# --no-verbose don't print the extra informational messages
+# --version print version information
+# -h, --help, --help-all print short, long, or detailed help message
+#
+# MODE must be one of the following:
+#
+# clean remove files from the build directory
+# compile compile a source file into a libtool object
+# execute automatically set library path, then run a program
+# finish complete the installation of libtool libraries
+# install install libraries or executables
+# link create a library or an executable
+# uninstall remove libraries from an installed directory
+#
+# MODE-ARGS vary depending on the MODE. When passed as first option,
+# `--mode=MODE' may be abbreviated as `MODE' or a unique abbreviation of that.
+# Try `$progname --help --mode=MODE' for a more detailed description of MODE.
+#
+# When reporting a bug, please describe a test case to reproduce it and
+# include the following information:
+#
+# host-triplet: $host
+# shell: $SHELL
+# compiler: $LTCC
+# compiler flags: $LTCFLAGS
+# linker: $LD (gnu? $with_gnu_ld)
+# $progname: (GNU libtool) 2.4.2
+# automake: $automake_version
+# autoconf: $autoconf_version
+#
+# Report bugs to <bug-libtool at gnu.org>.
+# GNU libtool home page: <http://www.gnu.org/software/libtool/>.
+# General help using GNU software: <http://www.gnu.org/gethelp/>.
+
+PROGRAM=libtool
+PACKAGE=libtool
+VERSION=2.4.2
+TIMESTAMP=""
+package_revision=1.3337
+
+# Be Bourne compatible
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
+fi
+BIN_SH=xpg4; export BIN_SH # for Tru64
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+ eval 'cat <<_LTECHO_EOF
+$1
+_LTECHO_EOF'
+}
+
+# NLS nuisances: We save the old values to restore during execute mode.
+lt_user_locale=
+lt_safe_locale=
+for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+do
+ eval "if test \"\${$lt_var+set}\" = set; then
+ save_$lt_var=\$$lt_var
+ $lt_var=C
+ export $lt_var
+ lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\"
+ lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\"
+ fi"
+done
+LC_ALL=C
+LANGUAGE=C
+export LANGUAGE LC_ALL
+
+$lt_unset CDPATH
+
+
+# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
+# is ksh but when the shell is invoked as "sh" and the current value of
+# the _XPG environment variable is not equal to 1 (one), the special
+# positional parameter $0, within a function call, is the name of the
+# function.
+progpath="$0"
+
+
+
+: ${CP="cp -f"}
+test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'}
+: ${MAKE="make"}
+: ${MKDIR="mkdir"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+: ${SHELL="${CONFIG_SHELL-/bin/sh}"}
+: ${Xsed="$SED -e 1s/^X//"}
+
+# Global variables:
+EXIT_SUCCESS=0
+EXIT_FAILURE=1
+EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing.
+EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake.
+
+exit_status=$EXIT_SUCCESS
+
+# Make sure IFS has a sensible default
+lt_nl='
+'
+IFS=" $lt_nl"
+
+dirname="s,/[^/]*$,,"
+basename="s,^.*/,,"
+
+# func_dirname file append nondir_replacement
+# Compute the dirname of FILE. If nonempty, add APPEND to the result,
+# otherwise set result to NONDIR_REPLACEMENT.
+func_dirname ()
+{
+ func_dirname_result=`$ECHO "${1}" | $SED "$dirname"`
+ if test "X$func_dirname_result" = "X${1}"; then
+ func_dirname_result="${3}"
+ else
+ func_dirname_result="$func_dirname_result${2}"
+ fi
+} # func_dirname may be replaced by extended shell implementation
+
+
+# func_basename file
+func_basename ()
+{
+ func_basename_result=`$ECHO "${1}" | $SED "$basename"`
+} # func_basename may be replaced by extended shell implementation
+
+
+# func_dirname_and_basename file append nondir_replacement
+# perform func_basename and func_dirname in a single function
+# call:
+# dirname: Compute the dirname of FILE. If nonempty,
+# add APPEND to the result, otherwise set result
+# to NONDIR_REPLACEMENT.
+# value returned in "$func_dirname_result"
+# basename: Compute filename of FILE.
+# value retuned in "$func_basename_result"
+# Implementation must be kept synchronized with func_dirname
+# and func_basename. For efficiency, we do not delegate to
+# those functions but instead duplicate the functionality here.
+func_dirname_and_basename ()
+{
+ # Extract subdirectory from the argument.
+ func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"`
+ if test "X$func_dirname_result" = "X${1}"; then
+ func_dirname_result="${3}"
+ else
+ func_dirname_result="$func_dirname_result${2}"
+ fi
+ func_basename_result=`$ECHO "${1}" | $SED -e "$basename"`
+} # func_dirname_and_basename may be replaced by extended shell implementation
+
+
+# func_stripname prefix suffix name
+# strip PREFIX and SUFFIX off of NAME.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+# func_strip_suffix prefix name
+func_stripname ()
+{
+ case ${2} in
+ .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
+ *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
+ esac
+} # func_stripname may be replaced by extended shell implementation
+
+
+# These SED scripts presuppose an absolute path with a trailing slash.
+pathcar='s,^/\([^/]*\).*$,\1,'
+pathcdr='s,^/[^/]*,,'
+removedotparts=':dotsl
+ s@/\./@/@g
+ t dotsl
+ s,/\.$,/,'
+collapseslashes='s@/\{1,\}@/@g'
+finalslash='s,/*$,/,'
+
+# func_normal_abspath PATH
+# Remove doubled-up and trailing slashes, "." path components,
+# and cancel out any ".." path components in PATH after making
+# it an absolute path.
+# value returned in "$func_normal_abspath_result"
+func_normal_abspath ()
+{
+ # Start from root dir and reassemble the path.
+ func_normal_abspath_result=
+ func_normal_abspath_tpath=$1
+ func_normal_abspath_altnamespace=
+ case $func_normal_abspath_tpath in
+ "")
+ # Empty path, that just means $cwd.
+ func_stripname '' '/' "`pwd`"
+ func_normal_abspath_result=$func_stripname_result
+ return
+ ;;
+ # The next three entries are used to spot a run of precisely
+ # two leading slashes without using negated character classes;
+ # we take advantage of case's first-match behaviour.
+ ///*)
+ # Unusual form of absolute path, do nothing.
+ ;;
+ //*)
+ # Not necessarily an ordinary path; POSIX reserves leading '//'
+ # and for example Cygwin uses it to access remote file shares
+ # over CIFS/SMB, so we conserve a leading double slash if found.
+ func_normal_abspath_altnamespace=/
+ ;;
+ /*)
+ # Absolute path, do nothing.
+ ;;
+ *)
+ # Relative path, prepend $cwd.
+ func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath
+ ;;
+ esac
+ # Cancel out all the simple stuff to save iterations. We also want
+ # the path to end with a slash for ease of parsing, so make sure
+ # there is one (and only one) here.
+ func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
+ -e "$removedotparts" -e "$collapseslashes" -e "$finalslash"`
+ while :; do
+ # Processed it all yet?
+ if test "$func_normal_abspath_tpath" = / ; then
+ # If we ascended to the root using ".." the result may be empty now.
+ if test -z "$func_normal_abspath_result" ; then
+ func_normal_abspath_result=/
+ fi
+ break
+ fi
+ func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \
+ -e "$pathcar"`
+ func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
+ -e "$pathcdr"`
+ # Figure out what to do with it
+ case $func_normal_abspath_tcomponent in
+ "")
+ # Trailing empty path component, ignore it.
+ ;;
+ ..)
+ # Parent dir; strip last assembled component from result.
+ func_dirname "$func_normal_abspath_result"
+ func_normal_abspath_result=$func_dirname_result
+ ;;
+ *)
+ # Actual path component, append it.
+ func_normal_abspath_result=$func_normal_abspath_result/$func_normal_abspath_tcomponent
+ ;;
+ esac
+ done
+ # Restore leading double-slash if one was found on entry.
+ func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result
+}
+
+# func_relative_path SRCDIR DSTDIR
+# generates a relative path from SRCDIR to DSTDIR, with a trailing
+# slash if non-empty, suitable for immediately appending a filename
+# without needing to append a separator.
+# value returned in "$func_relative_path_result"
+func_relative_path ()
+{
+ func_relative_path_result=
+ func_normal_abspath "$1"
+ func_relative_path_tlibdir=$func_normal_abspath_result
+ func_normal_abspath "$2"
+ func_relative_path_tbindir=$func_normal_abspath_result
+
+ # Ascend the tree starting from libdir
+ while :; do
+ # check if we have found a prefix of bindir
+ case $func_relative_path_tbindir in
+ $func_relative_path_tlibdir)
+ # found an exact match
+ func_relative_path_tcancelled=
+ break
+ ;;
+ $func_relative_path_tlibdir*)
+ # found a matching prefix
+ func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir"
+ func_relative_path_tcancelled=$func_stripname_result
+ if test -z "$func_relative_path_result"; then
+ func_relative_path_result=.
+ fi
+ break
+ ;;
+ *)
+ func_dirname $func_relative_path_tlibdir
+ func_relative_path_tlibdir=${func_dirname_result}
+ if test "x$func_relative_path_tlibdir" = x ; then
+ # Have to descend all the way to the root!
+ func_relative_path_result=../$func_relative_path_result
+ func_relative_path_tcancelled=$func_relative_path_tbindir
+ break
+ fi
+ func_relative_path_result=../$func_relative_path_result
+ ;;
+ esac
+ done
+
+ # Now calculate path; take care to avoid doubling-up slashes.
+ func_stripname '' '/' "$func_relative_path_result"
+ func_relative_path_result=$func_stripname_result
+ func_stripname '/' '/' "$func_relative_path_tcancelled"
+ if test "x$func_stripname_result" != x ; then
+ func_relative_path_result=${func_relative_path_result}/${func_stripname_result}
+ fi
+
+ # Normalisation. If bindir is libdir, return empty string,
+ # else relative path ending with a slash; either way, target
+ # file name can be directly appended.
+ if test ! -z "$func_relative_path_result"; then
+ func_stripname './' '' "$func_relative_path_result/"
+ func_relative_path_result=$func_stripname_result
+ fi
+}
+
+# The name of this program:
+func_dirname_and_basename "$progpath"
+progname=$func_basename_result
+
+# Make sure we have an absolute path for reexecution:
+case $progpath in
+ [\\/]*|[A-Za-z]:\\*) ;;
+ *[\\/]*)
+ progdir=$func_dirname_result
+ progdir=`cd "$progdir" && pwd`
+ progpath="$progdir/$progname"
+ ;;
+ *)
+ save_IFS="$IFS"
+ IFS=${PATH_SEPARATOR-:}
+ for progdir in $PATH; do
+ IFS="$save_IFS"
+ test -x "$progdir/$progname" && break
+ done
+ IFS="$save_IFS"
+ test -n "$progdir" || progdir=`pwd`
+ progpath="$progdir/$progname"
+ ;;
+esac
+
+# Sed substitution that helps us do robust quoting. It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed="${SED}"' -e 1s/^X//'
+sed_quote_subst='s/\([`"$\\]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\(["`\\]\)/\\\1/g'
+
+# Sed substitution that turns a string into a regex matching for the
+# string literally.
+sed_make_literal_regex='s,[].[^$\\*\/],\\&,g'
+
+# Sed substitution that converts a w32 file name or path
+# which contains forward slashes, into one that contains
+# (escaped) backslashes. A very naive implementation.
+lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
+
+# Re-`\' parameter expansions in output of double_quote_subst that were
+# `\'-ed in input to the same. If an odd number of `\' preceded a '$'
+# in input to double_quote_subst, that '$' was protected from expansion.
+# Since each input `\' is now two `\'s, look for any number of runs of
+# four `\'s followed by two `\'s and then a '$'. `\' that '$'.
+bs='\\'
+bs2='\\\\'
+bs4='\\\\\\\\'
+dollar='\$'
+sed_double_backslash="\
+ s/$bs4/&\\
+/g
+ s/^$bs2$dollar/$bs&/
+ s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g
+ s/\n//g"
+
+# Standard options:
+opt_dry_run=false
+opt_help=false
+opt_quiet=false
+opt_verbose=false
+opt_warning=:
+
+# func_echo arg...
+# Echo program name prefixed message, along with the current mode
+# name if it has been set yet.
+func_echo ()
+{
+ $ECHO "$progname: ${opt_mode+$opt_mode: }$*"
+}
+
+# func_verbose arg...
+# Echo program name prefixed message in verbose mode only.
+func_verbose ()
+{
+ $opt_verbose && func_echo ${1+"$@"}
+
+ # A bug in bash halts the script if the last line of a function
+ # fails when set -e is in force, so we need another command to
+ # work around that:
+ :
+}
+
+# func_echo_all arg...
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+ $ECHO "$*"
+}
+
+# func_error arg...
+# Echo program name prefixed message to standard error.
+func_error ()
+{
+ $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2
+}
+
+# func_warning arg...
+# Echo program name prefixed warning message to standard error.
+func_warning ()
+{
+ $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2
+
+ # bash bug again:
+ :
+}
+
+# func_fatal_error arg...
+# Echo program name prefixed message to standard error, and exit.
+func_fatal_error ()
+{
+ func_error ${1+"$@"}
+ exit $EXIT_FAILURE
+}
+
+# func_fatal_help arg...
+# Echo program name prefixed message to standard error, followed by
+# a help hint, and exit.
+func_fatal_help ()
+{
+ func_error ${1+"$@"}
+ func_fatal_error "$help"
+}
+help="Try \`$progname --help' for more information." ## default
+
+
+# func_grep expression filename
+# Check whether EXPRESSION matches any line of FILENAME, without output.
+func_grep ()
+{
+ $GREP "$1" "$2" >/dev/null 2>&1
+}
+
+
+# func_mkdir_p directory-path
+# Make sure the entire path to DIRECTORY-PATH is available.
+func_mkdir_p ()
+{
+ my_directory_path="$1"
+ my_dir_list=
+
+ if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then
+
+ # Protect directory names starting with `-'
+ case $my_directory_path in
+ -*) my_directory_path="./$my_directory_path" ;;
+ esac
+
+ # While some portion of DIR does not yet exist...
+ while test ! -d "$my_directory_path"; do
+ # ...make a list in topmost first order. Use a colon delimited
+ # list incase some portion of path contains whitespace.
+ my_dir_list="$my_directory_path:$my_dir_list"
+
+ # If the last portion added has no slash in it, the list is done
+ case $my_directory_path in */*) ;; *) break ;; esac
+
+ # ...otherwise throw away the child directory and loop
+ my_directory_path=`$ECHO "$my_directory_path" | $SED -e "$dirname"`
+ done
+ my_dir_list=`$ECHO "$my_dir_list" | $SED 's,:*$,,'`
+
+ save_mkdir_p_IFS="$IFS"; IFS=':'
+ for my_dir in $my_dir_list; do
+ IFS="$save_mkdir_p_IFS"
+ # mkdir can fail with a `File exist' error if two processes
+ # try to create one of the directories concurrently. Don't
+ # stop in that case!
+ $MKDIR "$my_dir" 2>/dev/null || :
+ done
+ IFS="$save_mkdir_p_IFS"
+
+ # Bail out if we (or some other process) failed to create a directory.
+ test -d "$my_directory_path" || \
+ func_fatal_error "Failed to create \`$1'"
+ fi
+}
+
+
+# func_mktempdir [string]
+# Make a temporary directory that won't clash with other running
+# libtool processes, and avoids race conditions if possible. If
+# given, STRING is the basename for that directory.
+func_mktempdir ()
+{
+ my_template="${TMPDIR-/tmp}/${1-$progname}"
+
+ if test "$opt_dry_run" = ":"; then
+ # Return a directory name, but don't create it in dry-run mode
+ my_tmpdir="${my_template}-$$"
+ else
+
+ # If mktemp works, use that first and foremost
+ my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
+
+ if test ! -d "$my_tmpdir"; then
+ # Failing that, at least try and use $RANDOM to avoid a race
+ my_tmpdir="${my_template}-${RANDOM-0}$$"
+
+ save_mktempdir_umask=`umask`
+ umask 0077
+ $MKDIR "$my_tmpdir"
+ umask $save_mktempdir_umask
+ fi
+
+ # If we're not in dry-run mode, bomb out on failure
+ test -d "$my_tmpdir" || \
+ func_fatal_error "cannot create temporary directory \`$my_tmpdir'"
+ fi
+
+ $ECHO "$my_tmpdir"
+}
+
+
+# func_quote_for_eval arg
+# Aesthetically quote ARG to be evaled later.
+# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT
+# is double-quoted, suitable for a subsequent eval, whereas
+# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters
+# which are still active within double quotes backslashified.
+func_quote_for_eval ()
+{
+ case $1 in
+ *[\\\`\"\$]*)
+ func_quote_for_eval_unquoted_result=`$ECHO "$1" | $SED "$sed_quote_subst"` ;;
+ *)
+ func_quote_for_eval_unquoted_result="$1" ;;
+ esac
+
+ case $func_quote_for_eval_unquoted_result in
+ # Double-quote args containing shell metacharacters to delay
+ # word splitting, command substitution and and variable
+ # expansion for a subsequent eval.
+ # Many Bourne shells cannot handle close brackets correctly
+ # in scan sets, so we specify it separately.
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\""
+ ;;
+ *)
+ func_quote_for_eval_result="$func_quote_for_eval_unquoted_result"
+ esac
+}
+
+
+# func_quote_for_expand arg
+# Aesthetically quote ARG to be evaled later; same as above,
+# but do not quote variable references.
+func_quote_for_expand ()
+{
+ case $1 in
+ *[\\\`\"]*)
+ my_arg=`$ECHO "$1" | $SED \
+ -e "$double_quote_subst" -e "$sed_double_backslash"` ;;
+ *)
+ my_arg="$1" ;;
+ esac
+
+ case $my_arg in
+ # Double-quote args containing shell metacharacters to delay
+ # word splitting and command substitution for a subsequent eval.
+ # Many Bourne shells cannot handle close brackets correctly
+ # in scan sets, so we specify it separately.
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ my_arg="\"$my_arg\""
+ ;;
+ esac
+
+ func_quote_for_expand_result="$my_arg"
+}
+
+
+# func_show_eval cmd [fail_exp]
+# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is
+# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP
+# is given, then evaluate it.
+func_show_eval ()
+{
+ my_cmd="$1"
+ my_fail_exp="${2-:}"
+
+ ${opt_silent-false} || {
+ func_quote_for_expand "$my_cmd"
+ eval "func_echo $func_quote_for_expand_result"
+ }
+
+ if ${opt_dry_run-false}; then :; else
+ eval "$my_cmd"
+ my_status=$?
+ if test "$my_status" -eq 0; then :; else
+ eval "(exit $my_status); $my_fail_exp"
+ fi
+ fi
+}
+
+
+# func_show_eval_locale cmd [fail_exp]
+# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is
+# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP
+# is given, then evaluate it. Use the saved locale for evaluation.
+func_show_eval_locale ()
+{
+ my_cmd="$1"
+ my_fail_exp="${2-:}"
+
+ ${opt_silent-false} || {
+ func_quote_for_expand "$my_cmd"
+ eval "func_echo $func_quote_for_expand_result"
+ }
+
+ if ${opt_dry_run-false}; then :; else
+ eval "$lt_user_locale
+ $my_cmd"
+ my_status=$?
+ eval "$lt_safe_locale"
+ if test "$my_status" -eq 0; then :; else
+ eval "(exit $my_status); $my_fail_exp"
+ fi
+ fi
+}
+
+# func_tr_sh
+# Turn $1 into a string suitable for a shell variable name.
+# Result is stored in $func_tr_sh_result. All characters
+# not in the set a-zA-Z0-9_ are replaced with '_'. Further,
+# if $1 begins with a digit, a '_' is prepended as well.
+func_tr_sh ()
+{
+ case $1 in
+ [0-9]* | *[!a-zA-Z0-9_]*)
+ func_tr_sh_result=`$ECHO "$1" | $SED 's/^\([0-9]\)/_\1/; s/[^a-zA-Z0-9_]/_/g'`
+ ;;
+ * )
+ func_tr_sh_result=$1
+ ;;
+ esac
+}
+
+
+# func_version
+# Echo version message to standard output and exit.
+func_version ()
+{
+ $opt_debug
+
+ $SED -n '/(C)/!b go
+ :more
+ /\./!{
+ N
+ s/\n# / /
+ b more
+ }
+ :go
+ /^# '$PROGRAM' (GNU /,/# warranty; / {
+ s/^# //
+ s/^# *$//
+ s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/
+ p
+ }' < "$progpath"
+ exit $?
+}
+
+# func_usage
+# Echo short help message to standard output and exit.
+func_usage ()
+{
+ $opt_debug
+
+ $SED -n '/^# Usage:/,/^# *.*--help/ {
+ s/^# //
+ s/^# *$//
+ s/\$progname/'$progname'/
+ p
+ }' < "$progpath"
+ echo
+ $ECHO "run \`$progname --help | more' for full usage"
+ exit $?
+}
+
+# func_help [NOEXIT]
+# Echo long help message to standard output and exit,
+# unless 'noexit' is passed as argument.
+func_help ()
+{
+ $opt_debug
+
+ $SED -n '/^# Usage:/,/# Report bugs to/ {
+ :print
+ s/^# //
+ s/^# *$//
+ s*\$progname*'$progname'*
+ s*\$host*'"$host"'*
+ s*\$SHELL*'"$SHELL"'*
+ s*\$LTCC*'"$LTCC"'*
+ s*\$LTCFLAGS*'"$LTCFLAGS"'*
+ s*\$LD*'"$LD"'*
+ s/\$with_gnu_ld/'"$with_gnu_ld"'/
+ s/\$automake_version/'"`(${AUTOMAKE-automake} --version) 2>/dev/null |$SED 1q`"'/
+ s/\$autoconf_version/'"`(${AUTOCONF-autoconf} --version) 2>/dev/null |$SED 1q`"'/
+ p
+ d
+ }
+ /^# .* home page:/b print
+ /^# General help using/b print
+ ' < "$progpath"
+ ret=$?
+ if test -z "$1"; then
+ exit $ret
+ fi
+}
+
+# func_missing_arg argname
+# Echo program name prefixed message to standard error and set global
+# exit_cmd.
+func_missing_arg ()
+{
+ $opt_debug
+
+ func_error "missing argument for $1."
+ exit_cmd=exit
+}
+
+
+# func_split_short_opt shortopt
+# Set func_split_short_opt_name and func_split_short_opt_arg shell
+# variables after splitting SHORTOPT after the 2nd character.
+func_split_short_opt ()
+{
+ my_sed_short_opt='1s/^\(..\).*$/\1/;q'
+ my_sed_short_rest='1s/^..\(.*\)$/\1/;q'
+
+ func_split_short_opt_name=`$ECHO "$1" | $SED "$my_sed_short_opt"`
+ func_split_short_opt_arg=`$ECHO "$1" | $SED "$my_sed_short_rest"`
+} # func_split_short_opt may be replaced by extended shell implementation
+
+
+# func_split_long_opt longopt
+# Set func_split_long_opt_name and func_split_long_opt_arg shell
+# variables after splitting LONGOPT at the `=' sign.
+func_split_long_opt ()
+{
+ my_sed_long_opt='1s/^\(--[^=]*\)=.*/\1/;q'
+ my_sed_long_arg='1s/^--[^=]*=//'
+
+ func_split_long_opt_name=`$ECHO "$1" | $SED "$my_sed_long_opt"`
+ func_split_long_opt_arg=`$ECHO "$1" | $SED "$my_sed_long_arg"`
+} # func_split_long_opt may be replaced by extended shell implementation
+
+exit_cmd=:
+
+
+
+
+
+magic="%%%MAGIC variable%%%"
+magic_exe="%%%MAGIC EXE variable%%%"
+
+# Global variables.
+nonopt=
+preserve_args=
+lo2o="s/\\.lo\$/.${objext}/"
+o2lo="s/\\.${objext}\$/.lo/"
+extracted_archives=
+extracted_serial=0
+
+# If this variable is set in any of the actions, the command in it
+# will be execed at the end. This prevents here-documents from being
+# left over by shells.
+exec_cmd=
+
+# func_append var value
+# Append VALUE to the end of shell variable VAR.
+func_append ()
+{
+ eval "${1}=\$${1}\${2}"
+} # func_append may be replaced by extended shell implementation
+
+# func_append_quoted var value
+# Quote VALUE and append to the end of shell variable VAR, separated
+# by a space.
+func_append_quoted ()
+{
+ func_quote_for_eval "${2}"
+ eval "${1}=\$${1}\\ \$func_quote_for_eval_result"
+} # func_append_quoted may be replaced by extended shell implementation
+
+
+# func_arith arithmetic-term...
+func_arith ()
+{
+ func_arith_result=`expr "${@}"`
+} # func_arith may be replaced by extended shell implementation
+
+
+# func_len string
+# STRING may not start with a hyphen.
+func_len ()
+{
+ func_len_result=`expr "${1}" : ".*" 2>/dev/null || echo $max_cmd_len`
+} # func_len may be replaced by extended shell implementation
+
+
+# func_lo2o object
+func_lo2o ()
+{
+ func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"`
+} # func_lo2o may be replaced by extended shell implementation
+
+
+# func_xform libobj-or-source
+func_xform ()
+{
+ func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'`
+} # func_xform may be replaced by extended shell implementation
+
+
+# func_fatal_configuration arg...
+# Echo program name prefixed message to standard error, followed by
+# a configuration failure hint, and exit.
+func_fatal_configuration ()
+{
+ func_error ${1+"$@"}
+ func_error "See the $PACKAGE documentation for more information."
+ func_fatal_error "Fatal configuration error."
+}
+
+
+# func_config
+# Display the configuration for all the tags in this script.
+func_config ()
+{
+ re_begincf='^# ### BEGIN LIBTOOL'
+ re_endcf='^# ### END LIBTOOL'
+
+ # Default configuration.
+ $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath"
+
+ # Now print the configurations for the tags.
+ for tagname in $taglist; do
+ $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath"
+ done
+
+ exit $?
+}
+
+# func_features
+# Display the features supported by this script.
+func_features ()
+{
+ echo "host: $host"
+ if test "$build_libtool_libs" = yes; then
+ echo "enable shared libraries"
+ else
+ echo "disable shared libraries"
+ fi
+ if test "$build_old_libs" = yes; then
+ echo "enable static libraries"
+ else
+ echo "disable static libraries"
+ fi
+
+ exit $?
+}
+
+# func_enable_tag tagname
+# Verify that TAGNAME is valid, and either flag an error and exit, or
+# enable the TAGNAME tag. We also add TAGNAME to the global $taglist
+# variable here.
+func_enable_tag ()
+{
+ # Global variable:
+ tagname="$1"
+
+ re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"
+ re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$"
+ sed_extractcf="/$re_begincf/,/$re_endcf/p"
+
+ # Validate tagname.
+ case $tagname in
+ *[!-_A-Za-z0-9,/]*)
+ func_fatal_error "invalid tag name: $tagname"
+ ;;
+ esac
+
+ # Don't test for the "default" C tag, as we know it's
+ # there but not specially marked.
+ case $tagname in
+ CC) ;;
+ *)
+ if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then
+ taglist="$taglist $tagname"
+
+ # Evaluate the configuration. Be careful to quote the path
+ # and the sed script, to avoid splitting on whitespace, but
+ # also don't use non-portable quotes within backquotes within
+ # quotes we have to do it in 2 steps:
+ extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
+ eval "$extractedcf"
+ else
+ func_error "ignoring unknown tag $tagname"
+ fi
+ ;;
+ esac
+}
+
+# func_check_version_match
+# Ensure that we are using m4 macros, and libtool script from the same
+# release of libtool.
+func_check_version_match ()
+{
+ if test "$package_revision" != "$macro_revision"; then
+ if test "$VERSION" != "$macro_version"; then
+ if test -z "$macro_version"; then
+ cat >&2 <<_LT_EOF
+$progname: Version mismatch error. This is $PACKAGE $VERSION, but the
+$progname: definition of this LT_INIT comes from an older release.
+$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
+$progname: and run autoconf again.
+_LT_EOF
+ else
+ cat >&2 <<_LT_EOF
+$progname: Version mismatch error. This is $PACKAGE $VERSION, but the
+$progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
+$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
+$progname: and run autoconf again.
+_LT_EOF
+ fi
+ else
+ cat >&2 <<_LT_EOF
+$progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision,
+$progname: but the definition of this LT_INIT comes from revision $macro_revision.
+$progname: You should recreate aclocal.m4 with macros from revision $package_revision
+$progname: of $PACKAGE $VERSION and run autoconf again.
+_LT_EOF
+ fi
+
+ exit $EXIT_MISMATCH
+ fi
+}
+
+
+# Shorthand for --mode=foo, only valid as the first argument
+case $1 in
+clean|clea|cle|cl)
+ shift; set dummy --mode clean ${1+"$@"}; shift
+ ;;
+compile|compil|compi|comp|com|co|c)
+ shift; set dummy --mode compile ${1+"$@"}; shift
+ ;;
+execute|execut|execu|exec|exe|ex|e)
+ shift; set dummy --mode execute ${1+"$@"}; shift
+ ;;
+finish|finis|fini|fin|fi|f)
+ shift; set dummy --mode finish ${1+"$@"}; shift
+ ;;
+install|instal|insta|inst|ins|in|i)
+ shift; set dummy --mode install ${1+"$@"}; shift
+ ;;
+link|lin|li|l)
+ shift; set dummy --mode link ${1+"$@"}; shift
+ ;;
+uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
+ shift; set dummy --mode uninstall ${1+"$@"}; shift
+ ;;
+esac
+
+
+
+# Option defaults:
+opt_debug=:
+opt_dry_run=false
+opt_config=false
+opt_preserve_dup_deps=false
+opt_features=false
+opt_finish=false
+opt_help=false
+opt_help_all=false
+opt_silent=:
+opt_warning=:
+opt_verbose=:
+opt_silent=false
+opt_verbose=false
+
+
+# Parse options once, thoroughly. This comes as soon as possible in the
+# script to make things like `--version' happen as quickly as we can.
+{
+ # this just eases exit handling
+ while test $# -gt 0; do
+ opt="$1"
+ shift
+ case $opt in
+ --debug|-x) opt_debug='set -x'
+ func_echo "enabling shell trace mode"
+ $opt_debug
+ ;;
+ --dry-run|--dryrun|-n)
+ opt_dry_run=:
+ ;;
+ --config)
+ opt_config=:
+func_config
+ ;;
+ --dlopen|-dlopen)
+ optarg="$1"
+ opt_dlopen="${opt_dlopen+$opt_dlopen
+}$optarg"
+ shift
+ ;;
+ --preserve-dup-deps)
+ opt_preserve_dup_deps=:
+ ;;
+ --features)
+ opt_features=:
+func_features
+ ;;
+ --finish)
+ opt_finish=:
+set dummy --mode finish ${1+"$@"}; shift
+ ;;
+ --help)
+ opt_help=:
+ ;;
+ --help-all)
+ opt_help_all=:
+opt_help=': help-all'
+ ;;
+ --mode)
+ test $# = 0 && func_missing_arg $opt && break
+ optarg="$1"
+ opt_mode="$optarg"
+case $optarg in
+ # Valid mode arguments:
+ clean|compile|execute|finish|install|link|relink|uninstall) ;;
+
+ # Catch anything else as an error
+ *) func_error "invalid argument for $opt"
+ exit_cmd=exit
+ break
+ ;;
+esac
+ shift
+ ;;
+ --no-silent|--no-quiet)
+ opt_silent=false
+func_append preserve_args " $opt"
+ ;;
+ --no-warning|--no-warn)
+ opt_warning=false
+func_append preserve_args " $opt"
+ ;;
+ --no-verbose)
+ opt_verbose=false
+func_append preserve_args " $opt"
+ ;;
+ --silent|--quiet)
+ opt_silent=:
+func_append preserve_args " $opt"
+ opt_verbose=false
+ ;;
+ --verbose|-v)
+ opt_verbose=:
+func_append preserve_args " $opt"
+opt_silent=false
+ ;;
+ --tag)
+ test $# = 0 && func_missing_arg $opt && break
+ optarg="$1"
+ opt_tag="$optarg"
+func_append preserve_args " $opt $optarg"
+func_enable_tag "$optarg"
+ shift
+ ;;
+
+ -\?|-h) func_usage ;;
+ --help) func_help ;;
+ --version) func_version ;;
+
+ # Separate optargs to long options:
+ --*=*)
+ func_split_long_opt "$opt"
+ set dummy "$func_split_long_opt_name" "$func_split_long_opt_arg" ${1+"$@"}
+ shift
+ ;;
+
+ # Separate non-argument short options:
+ -\?*|-h*|-n*|-v*)
+ func_split_short_opt "$opt"
+ set dummy "$func_split_short_opt_name" "-$func_split_short_opt_arg" ${1+"$@"}
+ shift
+ ;;
+
+ --) break ;;
+ -*) func_fatal_help "unrecognized option \`$opt'" ;;
+ *) set dummy "$opt" ${1+"$@"}; shift; break ;;
+ esac
+ done
+
+ # Validate options:
+
+ # save first non-option argument
+ if test "$#" -gt 0; then
+ nonopt="$opt"
+ shift
+ fi
+
+ # preserve --debug
+ test "$opt_debug" = : || func_append preserve_args " --debug"
+
+ case $host in
+ *cygwin* | *mingw* | *pw32* | *cegcc*)
+ # don't eliminate duplications in $postdeps and $predeps
+ opt_duplicate_compiler_generated_deps=:
+ ;;
+ *)
+ opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps
+ ;;
+ esac
+
+ $opt_help || {
+ # Sanity checks first:
+ func_check_version_match
+
+ if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
+ func_fatal_configuration "not configured to build any kind of library"
+ fi
+
+ # Darwin sucks
+ eval std_shrext=\"$shrext_cmds\"
+
+ # Only execute mode is allowed to have -dlopen flags.
+ if test -n "$opt_dlopen" && test "$opt_mode" != execute; then
+ func_error "unrecognized option \`-dlopen'"
+ $ECHO "$help" 1>&2
+ exit $EXIT_FAILURE
+ fi
+
+ # Change the help message to a mode-specific one.
+ generic_help="$help"
+ help="Try \`$progname --help --mode=$opt_mode' for more information."
+ }
+
+
+ # Bail if the options were screwed
+ $exit_cmd $EXIT_FAILURE
+}
+
+
+
+
+## ----------- ##
+## Main. ##
+## ----------- ##
+
+# func_lalib_p file
+# True iff FILE is a libtool `.la' library or `.lo' object file.
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_lalib_p ()
+{
+ test -f "$1" &&
+ $SED -e 4q "$1" 2>/dev/null \
+ | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
+}
+
+# func_lalib_unsafe_p file
+# True iff FILE is a libtool `.la' library or `.lo' object file.
+# This function implements the same check as func_lalib_p without
+# resorting to external programs. To this end, it redirects stdin and
+# closes it afterwards, without saving the original file descriptor.
+# As a safety measure, use it only where a negative result would be
+# fatal anyway. Works if `file' does not exist.
+func_lalib_unsafe_p ()
+{
+ lalib_p=no
+ if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then
+ for lalib_p_l in 1 2 3 4
+ do
+ read lalib_p_line
+ case "$lalib_p_line" in
+ \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;;
+ esac
+ done
+ exec 0<&5 5<&-
+ fi
+ test "$lalib_p" = yes
+}
+
+# func_ltwrapper_script_p file
+# True iff FILE is a libtool wrapper script
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_script_p ()
+{
+ func_lalib_p "$1"
+}
+
+# func_ltwrapper_executable_p file
+# True iff FILE is a libtool wrapper executable
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_executable_p ()
+{
+ func_ltwrapper_exec_suffix=
+ case $1 in
+ *.exe) ;;
+ *) func_ltwrapper_exec_suffix=.exe ;;
+ esac
+ $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1
+}
+
+# func_ltwrapper_scriptname file
+# Assumes file is an ltwrapper_executable
+# uses $file to determine the appropriate filename for a
+# temporary ltwrapper_script.
+func_ltwrapper_scriptname ()
+{
+ func_dirname_and_basename "$1" "" "."
+ func_stripname '' '.exe' "$func_basename_result"
+ func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"
+}
+
+# func_ltwrapper_p file
+# True iff FILE is a libtool wrapper script or wrapper executable
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_p ()
+{
+ func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1"
+}
+
+
+# func_execute_cmds commands fail_cmd
+# Execute tilde-delimited COMMANDS.
+# If FAIL_CMD is given, eval that upon failure.
+# FAIL_CMD may read-access the current command in variable CMD!
+func_execute_cmds ()
+{
+ $opt_debug
+ save_ifs=$IFS; IFS='~'
+ for cmd in $1; do
+ IFS=$save_ifs
+ eval cmd=\"$cmd\"
+ func_show_eval "$cmd" "${2-:}"
+ done
+ IFS=$save_ifs
+}
+
+
+# func_source file
+# Source FILE, adding directory component if necessary.
+# Note that it is not necessary on cygwin/mingw to append a dot to
+# FILE even if both FILE and FILE.exe exist: automatic-append-.exe
+# behavior happens only for exec(3), not for open(2)! Also, sourcing
+# `FILE.' does not work on cygwin managed mounts.
+func_source ()
+{
+ $opt_debug
+ case $1 in
+ */* | *\\*) . "$1" ;;
+ *) . "./$1" ;;
+ esac
+}
+
+
+# func_resolve_sysroot PATH
+# Replace a leading = in PATH with a sysroot. Store the result into
+# func_resolve_sysroot_result
+func_resolve_sysroot ()
+{
+ func_resolve_sysroot_result=$1
+ case $func_resolve_sysroot_result in
+ =*)
+ func_stripname '=' '' "$func_resolve_sysroot_result"
+ func_resolve_sysroot_result=$lt_sysroot$func_stripname_result
+ ;;
+ esac
+}
+
+# func_replace_sysroot PATH
+# If PATH begins with the sysroot, replace it with = and
+# store the result into func_replace_sysroot_result.
+func_replace_sysroot ()
+{
+ case "$lt_sysroot:$1" in
+ ?*:"$lt_sysroot"*)
+ func_stripname "$lt_sysroot" '' "$1"
+ func_replace_sysroot_result="=$func_stripname_result"
+ ;;
+ *)
+ # Including no sysroot.
+ func_replace_sysroot_result=$1
+ ;;
+ esac
+}
+
+# func_infer_tag arg
+# Infer tagged configuration to use if any are available and
+# if one wasn't chosen via the "--tag" command line option.
+# Only attempt this if the compiler in the base compile
+# command doesn't match the default compiler.
+# arg is usually of the form 'gcc ...'
+func_infer_tag ()
+{
+ $opt_debug
+
+ # FreeBSD-specific: where we install compilers with non-standard names
+ tag_compilers_CC="*cc cc* *gcc gcc* clang"
+ tag_compilers_CXX="*c++ c++* *g++ g++* clang++"
+ base_compiler=`set -- "$@"; echo $1`
+
+ # If $tagname isn't set, then try to infer if the default "CC" tag applies
+ if test -z "$tagname"; then
+ for zp in $tag_compilers_CC; do
+ case $base_compiler in
+ $zp) tagname="CC"; break;;
+ esac
+ done
+ fi
+
+ if test -n "$available_tags" && test -z "$tagname"; then
+ CC_quoted=
+ for arg in $CC; do
+ func_append_quoted CC_quoted "$arg"
+ done
+ CC_expanded=`func_echo_all $CC`
+ CC_quoted_expanded=`func_echo_all $CC_quoted`
+ case $@ in
+ # Blanks in the command may have been stripped by the calling shell,
+ # but not from the CC environment variable when configure was run.
+ " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
+ " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;;
+ # Blanks at the start of $base_compile will cause this to fail
+ # if we don't check for them as well.
+ *)
+ for z in $available_tags; do
+ if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
+ # Evaluate the configuration.
+ eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
+ CC_quoted=
+ for arg in $CC; do
+ # Double-quote args containing other shell metacharacters.
+ func_append_quoted CC_quoted "$arg"
+ done
+ CC_expanded=`func_echo_all $CC`
+ CC_quoted_expanded=`func_echo_all $CC_quoted`
+ case "$@ " in
+ " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
+ " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*)
+ # The compiler in the base compile command matches
+ # the one in the tagged configuration.
+ # Assume this is the tagged configuration we want.
+ tagname=$z
+ break
+ ;;
+ esac
+
+ # FreeBSD-specific: try compilers based on inferred tag
+ if test -z "$tagname"; then
+ eval "tag_compilers=\$tag_compilers_${z}"
+ if test -n "$tag_compilers"; then
+ for zp in $tag_compilers; do
+ case $base_compiler in
+ $zp) tagname=$z; break;;
+ esac
+ done
+ if test -n "$tagname"; then
+ break
+ fi
+ fi
+ fi
+ fi
+ done
+ # If $tagname still isn't set, then no tagged configuration
+ # was found and let the user know that the "--tag" command
+ # line option must be used.
+ if test -z "$tagname"; then
+ func_echo "unable to infer tagged configuration"
+ func_fatal_error "specify a tag with \`--tag'"
+# else
+# func_verbose "using $tagname tagged configuration"
+ fi
+ ;;
+ esac
+ fi
+}
+
+
+
+# func_write_libtool_object output_name pic_name nonpic_name
+# Create a libtool object file (analogous to a ".la" file),
+# but don't create it if we're doing a dry run.
+func_write_libtool_object ()
+{
+ write_libobj=${1}
+ if test "$build_libtool_libs" = yes; then
+ write_lobj=\'${2}\'
+ else
+ write_lobj=none
+ fi
+
+ if test "$build_old_libs" = yes; then
+ write_oldobj=\'${3}\'
+ else
+ write_oldobj=none
+ fi
+
+ $opt_dry_run || {
+ cat >${write_libobj}T <<EOF
+# $write_libobj - a libtool object file
+# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+
+# Name of the PIC object.
+pic_object=$write_lobj
+
+# Name of the non-PIC object
+non_pic_object=$write_oldobj
+
+EOF
+ $MV "${write_libobj}T" "${write_libobj}"
+ }
+}
+
+
+##################################################
+# FILE NAME AND PATH CONVERSION HELPER FUNCTIONS #
+##################################################
+
+# func_convert_core_file_wine_to_w32 ARG
+# Helper function used by file name conversion functions when $build is *nix,
+# and $host is mingw, cygwin, or some other w32 environment. Relies on a
+# correctly configured wine environment available, with the winepath program
+# in $build's $PATH.
+#
+# ARG is the $build file name to be converted to w32 format.
+# Result is available in $func_convert_core_file_wine_to_w32_result, and will
+# be empty on error (or when ARG is empty)
+func_convert_core_file_wine_to_w32 ()
+{
+ $opt_debug
+ func_convert_core_file_wine_to_w32_result="$1"
+ if test -n "$1"; then
+ # Unfortunately, winepath does not exit with a non-zero error code, so we
+ # are forced to check the contents of stdout. On the other hand, if the
+ # command is not found, the shell will set an exit code of 127 and print
+ # *an error message* to stdout. So we must check for both error code of
+ # zero AND non-empty stdout, which explains the odd construction:
+ func_convert_core_file_wine_to_w32_tmp=`winepath -w "$1" 2>/dev/null`
+ if test "$?" -eq 0 && test -n "${func_convert_core_file_wine_to_w32_tmp}"; then
+ func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" |
+ $SED -e "$lt_sed_naive_backslashify"`
+ else
+ func_convert_core_file_wine_to_w32_result=
+ fi
+ fi
+}
+# end: func_convert_core_file_wine_to_w32
+
+
+# func_convert_core_path_wine_to_w32 ARG
+# Helper function used by path conversion functions when $build is *nix, and
+# $host is mingw, cygwin, or some other w32 environment. Relies on a correctly
+# configured wine environment available, with the winepath program in $build's
+# $PATH. Assumes ARG has no leading or trailing path separator characters.
+#
+# ARG is path to be converted from $build format to win32.
+# Result is available in $func_convert_core_path_wine_to_w32_result.
+# Unconvertible file (directory) names in ARG are skipped; if no directory names
+# are convertible, then the result may be empty.
+func_convert_core_path_wine_to_w32 ()
+{
+ $opt_debug
+ # unfortunately, winepath doesn't convert paths, only file names
+ func_convert_core_path_wine_to_w32_result=""
+ if test -n "$1"; then
+ oldIFS=$IFS
+ IFS=:
+ for func_convert_core_path_wine_to_w32_f in $1; do
+ IFS=$oldIFS
+ func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f"
+ if test -n "$func_convert_core_file_wine_to_w32_result" ; then
+ if test -z "$func_convert_core_path_wine_to_w32_result"; then
+ func_convert_core_path_wine_to_w32_result="$func_convert_core_file_wine_to_w32_result"
+ else
+ func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result"
+ fi
+ fi
+ done
+ IFS=$oldIFS
+ fi
+}
+# end: func_convert_core_path_wine_to_w32
+
+
+# func_cygpath ARGS...
+# Wrapper around calling the cygpath program via LT_CYGPATH. This is used when
+# when (1) $build is *nix and Cygwin is hosted via a wine environment; or (2)
+# $build is MSYS and $host is Cygwin, or (3) $build is Cygwin. In case (1) or
+# (2), returns the Cygwin file name or path in func_cygpath_result (input
+# file name or path is assumed to be in w32 format, as previously converted
+# from $build's *nix or MSYS format). In case (3), returns the w32 file name
+# or path in func_cygpath_result (input file name or path is assumed to be in
+# Cygwin format). Returns an empty string on error.
+#
+# ARGS are passed to cygpath, with the last one being the file name or path to
+# be converted.
+#
+# Specify the absolute *nix (or w32) name to cygpath in the LT_CYGPATH
+# environment variable; do not put it in $PATH.
+func_cygpath ()
+{
+ $opt_debug
+ if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then
+ func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null`
+ if test "$?" -ne 0; then
+ # on failure, ensure result is empty
+ func_cygpath_result=
+ fi
+ else
+ func_cygpath_result=
+ func_error "LT_CYGPATH is empty or specifies non-existent file: \`$LT_CYGPATH'"
+ fi
+}
+#end: func_cygpath
+
+
+# func_convert_core_msys_to_w32 ARG
+# Convert file name or path ARG from MSYS format to w32 format. Return
+# result in func_convert_core_msys_to_w32_result.
+func_convert_core_msys_to_w32 ()
+{
+ $opt_debug
+ # awkward: cmd appends spaces to result
+ func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null |
+ $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"`
+}
+#end: func_convert_core_msys_to_w32
+
+
+# func_convert_file_check ARG1 ARG2
+# Verify that ARG1 (a file name in $build format) was converted to $host
+# format in ARG2. Otherwise, emit an error message, but continue (resetting
+# func_to_host_file_result to ARG1).
+func_convert_file_check ()
+{
+ $opt_debug
+ if test -z "$2" && test -n "$1" ; then
+ func_error "Could not determine host file name corresponding to"
+ func_error " \`$1'"
+ func_error "Continuing, but uninstalled executables may not work."
+ # Fallback:
+ func_to_host_file_result="$1"
+ fi
+}
+# end func_convert_file_check
+
+
+# func_convert_path_check FROM_PATHSEP TO_PATHSEP FROM_PATH TO_PATH
+# Verify that FROM_PATH (a path in $build format) was converted to $host
+# format in TO_PATH. Otherwise, emit an error message, but continue, resetting
+# func_to_host_file_result to a simplistic fallback value (see below).
+func_convert_path_check ()
+{
+ $opt_debug
+ if test -z "$4" && test -n "$3"; then
+ func_error "Could not determine the host path corresponding to"
+ func_error " \`$3'"
+ func_error "Continuing, but uninstalled executables may not work."
+ # Fallback. This is a deliberately simplistic "conversion" and
+ # should not be "improved". See libtool.info.
+ if test "x$1" != "x$2"; then
+ lt_replace_pathsep_chars="s|$1|$2|g"
+ func_to_host_path_result=`echo "$3" |
+ $SED -e "$lt_replace_pathsep_chars"`
+ else
+ func_to_host_path_result="$3"
+ fi
+ fi
+}
+# end func_convert_path_check
+
+
+# func_convert_path_front_back_pathsep FRONTPAT BACKPAT REPL ORIG
+# Modifies func_to_host_path_result by prepending REPL if ORIG matches FRONTPAT
+# and appending REPL if ORIG matches BACKPAT.
+func_convert_path_front_back_pathsep ()
+{
+ $opt_debug
+ case $4 in
+ $1 ) func_to_host_path_result="$3$func_to_host_path_result"
+ ;;
+ esac
+ case $4 in
+ $2 ) func_append func_to_host_path_result "$3"
+ ;;
+ esac
+}
+# end func_convert_path_front_back_pathsep
+
+
+##################################################
+# $build to $host FILE NAME CONVERSION FUNCTIONS #
+##################################################
+# invoked via `$to_host_file_cmd ARG'
+#
+# In each case, ARG is the path to be converted from $build to $host format.
+# Result will be available in $func_to_host_file_result.
+
+
+# func_to_host_file ARG
+# Converts the file name ARG from $build format to $host format. Return result
+# in func_to_host_file_result.
+func_to_host_file ()
+{
+ $opt_debug
+ $to_host_file_cmd "$1"
+}
+# end func_to_host_file
+
+
+# func_to_tool_file ARG LAZY
+# converts the file name ARG from $build format to toolchain format. Return
+# result in func_to_tool_file_result. If the conversion in use is listed
+# in (the comma separated) LAZY, no conversion takes place.
+func_to_tool_file ()
+{
+ $opt_debug
+ case ,$2, in
+ *,"$to_tool_file_cmd",*)
+ func_to_tool_file_result=$1
+ ;;
+ *)
+ $to_tool_file_cmd "$1"
+ func_to_tool_file_result=$func_to_host_file_result
+ ;;
+ esac
+}
+# end func_to_tool_file
+
+
+# func_convert_file_noop ARG
+# Copy ARG to func_to_host_file_result.
+func_convert_file_noop ()
+{
+ func_to_host_file_result="$1"
+}
+# end func_convert_file_noop
+
+
+# func_convert_file_msys_to_w32 ARG
+# Convert file name ARG from (mingw) MSYS to (mingw) w32 format; automatic
+# conversion to w32 is not available inside the cwrapper. Returns result in
+# func_to_host_file_result.
+func_convert_file_msys_to_w32 ()
+{
+ $opt_debug
+ func_to_host_file_result="$1"
+ if test -n "$1"; then
+ func_convert_core_msys_to_w32 "$1"
+ func_to_host_file_result="$func_convert_core_msys_to_w32_result"
+ fi
+ func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_msys_to_w32
+
+
+# func_convert_file_cygwin_to_w32 ARG
+# Convert file name ARG from Cygwin to w32 format. Returns result in
+# func_to_host_file_result.
+func_convert_file_cygwin_to_w32 ()
+{
+ $opt_debug
+ func_to_host_file_result="$1"
+ if test -n "$1"; then
+ # because $build is cygwin, we call "the" cygpath in $PATH; no need to use
+ # LT_CYGPATH in this case.
+ func_to_host_file_result=`cygpath -m "$1"`
+ fi
+ func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_cygwin_to_w32
+
+
+# func_convert_file_nix_to_w32 ARG
+# Convert file name ARG from *nix to w32 format. Requires a wine environment
+# and a working winepath. Returns result in func_to_host_file_result.
+func_convert_file_nix_to_w32 ()
+{
+ $opt_debug
+ func_to_host_file_result="$1"
+ if test -n "$1"; then
+ func_convert_core_file_wine_to_w32 "$1"
+ func_to_host_file_result="$func_convert_core_file_wine_to_w32_result"
+ fi
+ func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_nix_to_w32
+
+
+# func_convert_file_msys_to_cygwin ARG
+# Convert file name ARG from MSYS to Cygwin format. Requires LT_CYGPATH set.
+# Returns result in func_to_host_file_result.
+func_convert_file_msys_to_cygwin ()
+{
+ $opt_debug
+ func_to_host_file_result="$1"
+ if test -n "$1"; then
+ func_convert_core_msys_to_w32 "$1"
+ func_cygpath -u "$func_convert_core_msys_to_w32_result"
+ func_to_host_file_result="$func_cygpath_result"
+ fi
+ func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_msys_to_cygwin
+
+
+# func_convert_file_nix_to_cygwin ARG
+# Convert file name ARG from *nix to Cygwin format. Requires Cygwin installed
+# in a wine environment, working winepath, and LT_CYGPATH set. Returns result
+# in func_to_host_file_result.
+func_convert_file_nix_to_cygwin ()
+{
+ $opt_debug
+ func_to_host_file_result="$1"
+ if test -n "$1"; then
+ # convert from *nix to w32, then use cygpath to convert from w32 to cygwin.
+ func_convert_core_file_wine_to_w32 "$1"
+ func_cygpath -u "$func_convert_core_file_wine_to_w32_result"
+ func_to_host_file_result="$func_cygpath_result"
+ fi
+ func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_nix_to_cygwin
+
+
+#############################################
+# $build to $host PATH CONVERSION FUNCTIONS #
+#############################################
+# invoked via `$to_host_path_cmd ARG'
+#
+# In each case, ARG is the path to be converted from $build to $host format.
+# The result will be available in $func_to_host_path_result.
+#
+# Path separators are also converted from $build format to $host format. If
+# ARG begins or ends with a path separator character, it is preserved (but
+# converted to $host format) on output.
+#
+# All path conversion functions are named using the following convention:
+# file name conversion function : func_convert_file_X_to_Y ()
+# path conversion function : func_convert_path_X_to_Y ()
+# where, for any given $build/$host combination the 'X_to_Y' value is the
+# same. If conversion functions are added for new $build/$host combinations,
+# the two new functions must follow this pattern, or func_init_to_host_path_cmd
+# will break.
+
+
+# func_init_to_host_path_cmd
+# Ensures that function "pointer" variable $to_host_path_cmd is set to the
+# appropriate value, based on the value of $to_host_file_cmd.
+to_host_path_cmd=
+func_init_to_host_path_cmd ()
+{
+ $opt_debug
+ if test -z "$to_host_path_cmd"; then
+ func_stripname 'func_convert_file_' '' "$to_host_file_cmd"
+ to_host_path_cmd="func_convert_path_${func_stripname_result}"
+ fi
+}
+
+
+# func_to_host_path ARG
+# Converts the path ARG from $build format to $host format. Return result
+# in func_to_host_path_result.
+func_to_host_path ()
+{
+ $opt_debug
+ func_init_to_host_path_cmd
+ $to_host_path_cmd "$1"
+}
+# end func_to_host_path
+
+
+# func_convert_path_noop ARG
+# Copy ARG to func_to_host_path_result.
+func_convert_path_noop ()
+{
+ func_to_host_path_result="$1"
+}
+# end func_convert_path_noop
+
+
+# func_convert_path_msys_to_w32 ARG
+# Convert path ARG from (mingw) MSYS to (mingw) w32 format; automatic
+# conversion to w32 is not available inside the cwrapper. Returns result in
+# func_to_host_path_result.
+func_convert_path_msys_to_w32 ()
+{
+ $opt_debug
+ func_to_host_path_result="$1"
+ if test -n "$1"; then
+ # Remove leading and trailing path separator characters from ARG. MSYS
+ # behavior is inconsistent here; cygpath turns them into '.;' and ';.';
+ # and winepath ignores them completely.
+ func_stripname : : "$1"
+ func_to_host_path_tmp1=$func_stripname_result
+ func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
+ func_to_host_path_result="$func_convert_core_msys_to_w32_result"
+ func_convert_path_check : ";" \
+ "$func_to_host_path_tmp1" "$func_to_host_path_result"
+ func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
+ fi
+}
+# end func_convert_path_msys_to_w32
+
+
+# func_convert_path_cygwin_to_w32 ARG
+# Convert path ARG from Cygwin to w32 format. Returns result in
+# func_to_host_file_result.
+func_convert_path_cygwin_to_w32 ()
+{
+ $opt_debug
+ func_to_host_path_result="$1"
+ if test -n "$1"; then
+ # See func_convert_path_msys_to_w32:
+ func_stripname : : "$1"
+ func_to_host_path_tmp1=$func_stripname_result
+ func_to_host_path_result=`cygpath -m -p "$func_to_host_path_tmp1"`
+ func_convert_path_check : ";" \
+ "$func_to_host_path_tmp1" "$func_to_host_path_result"
+ func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
+ fi
+}
+# end func_convert_path_cygwin_to_w32
+
+
+# func_convert_path_nix_to_w32 ARG
+# Convert path ARG from *nix to w32 format. Requires a wine environment and
+# a working winepath. Returns result in func_to_host_file_result.
+func_convert_path_nix_to_w32 ()
+{
+ $opt_debug
+ func_to_host_path_result="$1"
+ if test -n "$1"; then
+ # See func_convert_path_msys_to_w32:
+ func_stripname : : "$1"
+ func_to_host_path_tmp1=$func_stripname_result
+ func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
+ func_to_host_path_result="$func_convert_core_path_wine_to_w32_result"
+ func_convert_path_check : ";" \
+ "$func_to_host_path_tmp1" "$func_to_host_path_result"
+ func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
+ fi
+}
+# end func_convert_path_nix_to_w32
+
+
+# func_convert_path_msys_to_cygwin ARG
+# Convert path ARG from MSYS to Cygwin format. Requires LT_CYGPATH set.
+# Returns result in func_to_host_file_result.
+func_convert_path_msys_to_cygwin ()
+{
+ $opt_debug
+ func_to_host_path_result="$1"
+ if test -n "$1"; then
+ # See func_convert_path_msys_to_w32:
+ func_stripname : : "$1"
+ func_to_host_path_tmp1=$func_stripname_result
+ func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
+ func_cygpath -u -p "$func_convert_core_msys_to_w32_result"
+ func_to_host_path_result="$func_cygpath_result"
+ func_convert_path_check : : \
+ "$func_to_host_path_tmp1" "$func_to_host_path_result"
+ func_convert_path_front_back_pathsep ":*" "*:" : "$1"
+ fi
+}
+# end func_convert_path_msys_to_cygwin
+
+
+# func_convert_path_nix_to_cygwin ARG
+# Convert path ARG from *nix to Cygwin format. Requires Cygwin installed in a
+# a wine environment, working winepath, and LT_CYGPATH set. Returns result in
+# func_to_host_file_result.
+func_convert_path_nix_to_cygwin ()
+{
+ $opt_debug
+ func_to_host_path_result="$1"
+ if test -n "$1"; then
+ # Remove leading and trailing path separator characters from
+ # ARG. msys behavior is inconsistent here, cygpath turns them
+ # into '.;' and ';.', and winepath ignores them completely.
+ func_stripname : : "$1"
+ func_to_host_path_tmp1=$func_stripname_result
+ func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
+ func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result"
+ func_to_host_path_result="$func_cygpath_result"
+ func_convert_path_check : : \
+ "$func_to_host_path_tmp1" "$func_to_host_path_result"
+ func_convert_path_front_back_pathsep ":*" "*:" : "$1"
+ fi
+}
+# end func_convert_path_nix_to_cygwin
+
+
+# func_mode_compile arg...
+func_mode_compile ()
+{
+ $opt_debug
+ # Get the compilation command and the source file.
+ base_compile=
+ srcfile="$nonopt" # always keep a non-empty value in "srcfile"
+ suppress_opt=yes
+ suppress_output=
+ arg_mode=normal
+ libobj=
+ later=
+ pie_flag=
+
+ for arg
+ do
+ case $arg_mode in
+ arg )
+ # do not "continue". Instead, add this to base_compile
+ lastarg="$arg"
+ arg_mode=normal
+ ;;
+
+ target )
+ libobj="$arg"
+ arg_mode=normal
+ continue
+ ;;
+
+ normal )
+ # Accept any command-line options.
+ case $arg in
+ -o)
+ test -n "$libobj" && \
+ func_fatal_error "you cannot specify \`-o' more than once"
+ arg_mode=target
+ continue
+ ;;
+
+ -pie | -fpie | -fPIE)
+ func_append pie_flag " $arg"
+ continue
+ ;;
+
+ -shared | -static | -prefer-pic | -prefer-non-pic)
+ func_append later " $arg"
+ continue
+ ;;
+
+ -no-suppress)
+ suppress_opt=no
+ continue
+ ;;
+
+ -Xcompiler)
+ arg_mode=arg # the next one goes into the "base_compile" arg list
+ continue # The current "srcfile" will either be retained or
+ ;; # replaced later. I would guess that would be a bug.
+
+ -Wc,*)
+ func_stripname '-Wc,' '' "$arg"
+ args=$func_stripname_result
+ lastarg=
+ save_ifs="$IFS"; IFS=','
+ for arg in $args; do
+ IFS="$save_ifs"
+ func_append_quoted lastarg "$arg"
+ done
+ IFS="$save_ifs"
+ func_stripname ' ' '' "$lastarg"
+ lastarg=$func_stripname_result
+
+ # Add the arguments to base_compile.
+ func_append base_compile " $lastarg"
+ continue
+ ;;
+
+ *)
+ # Accept the current argument as the source file.
+ # The previous "srcfile" becomes the current argument.
+ #
+ lastarg="$srcfile"
+ srcfile="$arg"
+ ;;
+ esac # case $arg
+ ;;
+ esac # case $arg_mode
+
+ # Aesthetically quote the previous argument.
+ func_append_quoted base_compile "$lastarg"
+ done # for arg
+
+ case $arg_mode in
+ arg)
+ func_fatal_error "you must specify an argument for -Xcompile"
+ ;;
+ target)
+ func_fatal_error "you must specify a target with \`-o'"
+ ;;
+ *)
+ # Get the name of the library object.
+ test -z "$libobj" && {
+ func_basename "$srcfile"
+ libobj="$func_basename_result"
+ }
+ ;;
+ esac
+
+ # Recognize several different file suffixes.
+ # If the user specifies -o file.o, it is replaced with file.lo
+ case $libobj in
+ *.[cCFSifmso] | \
+ *.ada | *.adb | *.ads | *.asm | \
+ *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \
+ *.[fF][09]? | *.for | *.java | *.go | *.obj | *.sx | *.cu | *.cup)
+ func_xform "$libobj"
+ libobj=$func_xform_result
+ ;;
+ esac
+
+ case $libobj in
+ *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;;
+ *)
+ func_fatal_error "cannot determine name of library object from \`$libobj'"
+ ;;
+ esac
+
+ func_infer_tag $base_compile
+
+ for arg in $later; do
+ case $arg in
+ -shared)
+ test "$build_libtool_libs" != yes && \
+ func_fatal_configuration "can not build a shared library"
+ build_old_libs=no
+ continue
+ ;;
+
+ -static)
+ build_libtool_libs=no
+ build_old_libs=yes
+ continue
+ ;;
+
+ -prefer-pic)
+ pic_mode=yes
+ continue
+ ;;
+
+ -prefer-non-pic)
+ pic_mode=no
+ continue
+ ;;
+ esac
+ done
+
+ func_quote_for_eval "$libobj"
+ test "X$libobj" != "X$func_quote_for_eval_result" \
+ && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"' &()|`$[]' \
+ && func_warning "libobj name \`$libobj' may not contain shell special characters."
+ func_dirname_and_basename "$obj" "/" ""
+ objname="$func_basename_result"
+ xdir="$func_dirname_result"
+ lobj=${xdir}$objdir/$objname
+
+ test -z "$base_compile" && \
+ func_fatal_help "you must specify a compilation command"
+
+ # Delete any leftover library objects.
+ if test "$build_old_libs" = yes; then
+ removelist="$obj $lobj $libobj ${libobj}T"
+ else
+ removelist="$lobj $libobj ${libobj}T"
+ fi
+
+ # On Cygwin there's no "real" PIC flag so we must build both object types
+ case $host_os in
+ cygwin* | mingw* | pw32* | os2* | cegcc*)
+ pic_mode=default
+ ;;
+ esac
+ if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
+ # non-PIC code in shared libraries is not supported
+ pic_mode=default
+ fi
+
+ # Calculate the filename of the output object if compiler does
+ # not support -o with -c
+ if test "$compiler_c_o" = no; then
+ output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.${objext}
+ lockfile="$output_obj.lock"
+ else
+ output_obj=
+ need_locks=no
+ lockfile=
+ fi
+
+ # Lock this critical section if it is needed
+ # We use this script file to make the link, it avoids creating a new file
+ if test "$need_locks" = yes; then
+ until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
+ func_echo "Waiting for $lockfile to be removed"
+ sleep 2
+ done
+ elif test "$need_locks" = warn; then
+ if test -f "$lockfile"; then
+ $ECHO "\
+*** ERROR, $lockfile exists and contains:
+`cat $lockfile 2>/dev/null`
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together. If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+ $opt_dry_run || $RM $removelist
+ exit $EXIT_FAILURE
+ fi
+ func_append removelist " $output_obj"
+ $ECHO "$srcfile" > "$lockfile"
+ fi
+
+ $opt_dry_run || $RM $removelist
+ func_append removelist " $lockfile"
+ trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15
+
+ func_to_tool_file "$srcfile" func_convert_file_msys_to_w32
+ srcfile=$func_to_tool_file_result
+ func_quote_for_eval "$srcfile"
+ qsrcfile=$func_quote_for_eval_result
+
+ # Only build a PIC object if we are building libtool libraries.
+ if test "$build_libtool_libs" = yes; then
+ # Without this assignment, base_compile gets emptied.
+ fbsd_hideous_sh_bug=$base_compile
+
+ if test "$pic_mode" != no; then
+ command="$base_compile $qsrcfile $pic_flag"
+ else
+ # Don't build PIC code
+ command="$base_compile $qsrcfile"
+ fi
+
+ func_mkdir_p "$xdir$objdir"
+
+ if test -z "$output_obj"; then
+ # Place PIC objects in $objdir
+ func_append command " -o $lobj"
+ fi
+
+ func_show_eval_locale "$command" \
+ 'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE'
+
+ if test "$need_locks" = warn &&
+ test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
+ $ECHO "\
+*** ERROR, $lockfile contains:
+`cat $lockfile 2>/dev/null`
+
+but it should contain:
+$srcfile
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together. If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+ $opt_dry_run || $RM $removelist
+ exit $EXIT_FAILURE
+ fi
+
+ # Just move the object if needed, then go on to compile the next one
+ if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
+ func_show_eval '$MV "$output_obj" "$lobj"' \
+ 'error=$?; $opt_dry_run || $RM $removelist; exit $error'
+ fi
+
+ # Allow error messages only from the first compilation.
+ if test "$suppress_opt" = yes; then
+ suppress_output=' >/dev/null 2>&1'
+ fi
+ fi
+
+ # Only build a position-dependent object if we build old libraries.
+ if test "$build_old_libs" = yes; then
+ if test "$pic_mode" != yes; then
+ # Don't build PIC code
+ command="$base_compile $qsrcfile$pie_flag"
+ else
+ command="$base_compile $qsrcfile $pic_flag"
+ fi
+ if test "$compiler_c_o" = yes; then
+ func_append command " -o $obj"
+ fi
+
+ # Suppress compiler output if we already did a PIC compilation.
+ func_append command "$suppress_output"
+ func_show_eval_locale "$command" \
+ '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'
+
+ if test "$need_locks" = warn &&
+ test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
+ $ECHO "\
+*** ERROR, $lockfile contains:
+`cat $lockfile 2>/dev/null`
+
+but it should contain:
+$srcfile
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together. If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+ $opt_dry_run || $RM $removelist
+ exit $EXIT_FAILURE
+ fi
+
+ # Just move the object if needed
+ if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
+ func_show_eval '$MV "$output_obj" "$obj"' \
+ 'error=$?; $opt_dry_run || $RM $removelist; exit $error'
+ fi
+ fi
+
+ $opt_dry_run || {
+ func_write_libtool_object "$libobj" "$objdir/$objname" "$objname"
+
+ # Unlock the critical section if it was locked
+ if test "$need_locks" != no; then
+ removelist=$lockfile
+ $RM "$lockfile"
+ fi
+ }
+
+ exit $EXIT_SUCCESS
+}
+
+$opt_help || {
+ test "$opt_mode" = compile && func_mode_compile ${1+"$@"}
+}
+
+func_mode_help ()
+{
+ # We need to display help for each of the modes.
+ case $opt_mode in
+ "")
+ # Generic help is extracted from the usage comments
+ # at the start of this file.
+ func_help
+ ;;
+
+ clean)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
+
+Remove files from the build directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
+to RM.
+
+If FILE is a libtool library, object or program, all the files associated
+with it are deleted. Otherwise, only FILE itself is deleted using RM."
+ ;;
+
+ compile)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
+
+Compile a source file into a libtool library object.
+
+This mode accepts the following additional options:
+
+ -o OUTPUT-FILE set the output file name to OUTPUT-FILE
+ -no-suppress do not suppress compiler output for multiple passes
+ -prefer-pic try to build PIC objects only
+ -prefer-non-pic try to build non-PIC objects only
+ -shared do not build a \`.o' file suitable for static linking
+ -static only build a \`.o' file suitable for static linking
+ -Wc,FLAG pass FLAG directly to the compiler
+
+COMPILE-COMMAND is a command to be used in creating a \`standard' object file
+from the given SOURCEFILE.
+
+The output file name is determined by removing the directory component from
+SOURCEFILE, then substituting the C source code suffix \`.c' with the
+library object suffix, \`.lo'."
+ ;;
+
+ execute)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]...
+
+Automatically set library path, then run a program.
+
+This mode accepts the following additional options:
+
+ -dlopen FILE add the directory containing FILE to the library path
+
+This mode sets the library path environment variable according to \`-dlopen'
+flags.
+
+If any of the ARGS are libtool executable wrappers, then they are translated
+into their corresponding uninstalled binary, and any of their required library
+directories are added to the library path.
+
+Then, COMMAND is executed, with ARGS as arguments."
+ ;;
+
+ finish)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=finish [LIBDIR]...
+
+Complete the installation of libtool libraries.
+
+Each LIBDIR is a directory that contains libtool libraries.
+
+The commands that this mode executes may require superuser privileges. Use
+the \`--dry-run' option if you just want to see what would be executed."
+ ;;
+
+ install)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND...
+
+Install executables or libraries.
+
+INSTALL-COMMAND is the installation command. The first component should be
+either the \`install' or \`cp' program.
+
+The following components of INSTALL-COMMAND are treated specially:
+
+ -inst-prefix-dir PREFIX-DIR Use PREFIX-DIR as a staging area for installation
+
+The rest of the components are interpreted as arguments to that command (only
+BSD-compatible install options are recognized)."
+ ;;
+
+ link)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=link LINK-COMMAND...
+
+Link object files or libraries together to form another library, or to
+create an executable program.
+
+LINK-COMMAND is a command using the C compiler that you would use to create
+a program from several object files.
+
+The following components of LINK-COMMAND are treated specially:
+
+ -all-static do not do any dynamic linking at all
+ -avoid-version do not add a version suffix if possible
+ -bindir BINDIR specify path to binaries directory (for systems where
+ libraries must be found in the PATH setting at runtime)
+ -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime
+ -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols
+ -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
+ -export-symbols SYMFILE
+ try to export only the symbols listed in SYMFILE
+ -export-symbols-regex REGEX
+ try to export only the symbols matching REGEX
+ -LLIBDIR search LIBDIR for required installed libraries
+ -lNAME OUTPUT-FILE requires the installed library libNAME
+ -module build a library that can dlopened
+ -no-fast-install disable the fast-install mode
+ -no-install link a not-installable executable
+ -no-undefined declare that a library does not refer to external symbols
+ -o OUTPUT-FILE create OUTPUT-FILE from the specified objects
+ -objectlist FILE Use a list of object files found in FILE to specify objects
+ -precious-files-regex REGEX
+ don't remove output files matching REGEX
+ -release RELEASE specify package release information
+ -rpath LIBDIR the created library will eventually be installed in LIBDIR
+ -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries
+ -shared only do dynamic linking of libtool libraries
+ -shrext SUFFIX override the standard shared library file extension
+ -static do not do any dynamic linking of uninstalled libtool libraries
+ -static-libtool-libs
+ do not do any dynamic linking of libtool libraries
+ -version-info CURRENT[:REVISION[:AGE]]
+ specify library version info [each variable defaults to 0]
+ -weak LIBNAME declare that the target provides the LIBNAME interface
+ -Wc,FLAG
+ -Xcompiler FLAG pass linker-specific FLAG directly to the compiler
+ -Wl,FLAG
+ -Xlinker FLAG pass linker-specific FLAG directly to the linker
+ -XCClinker FLAG pass link-specific FLAG to the compiler driver (CC)
+
+All other options (arguments beginning with \`-') are ignored.
+
+Every other argument is treated as a filename. Files ending in \`.la' are
+treated as uninstalled libtool libraries, other files are standard or library
+object files.
+
+If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
+only library objects (\`.lo' files) may be specified, and \`-rpath' is
+required, except when creating a convenience library.
+
+If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
+using \`ar' and \`ranlib', or on Windows using \`lib'.
+
+If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
+is created, otherwise an executable program is created."
+ ;;
+
+ uninstall)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
+
+Remove libraries from an installation directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
+to RM.
+
+If FILE is a libtool library, all the files associated with it are deleted.
+Otherwise, only FILE itself is deleted using RM."
+ ;;
+
+ *)
+ func_fatal_help "invalid operation mode \`$opt_mode'"
+ ;;
+ esac
+
+ echo
+ $ECHO "Try \`$progname --help' for more information about other modes."
+}
+
+# Now that we've collected a possible --mode arg, show help if necessary
+if $opt_help; then
+ if test "$opt_help" = :; then
+ func_mode_help
+ else
+ {
+ func_help noexit
+ for opt_mode in compile link execute install finish uninstall clean; do
+ func_mode_help
+ done
+ } | sed -n '1p; 2,$s/^Usage:/ or: /p'
+ {
+ func_help noexit
+ for opt_mode in compile link execute install finish uninstall clean; do
+ echo
+ func_mode_help
+ done
+ } |
+ sed '1d
+ /^When reporting/,/^Report/{
+ H
+ d
+ }
+ $x
+ /information about other modes/d
+ /more detailed .*MODE/d
+ s/^Usage:.*--mode=\([^ ]*\) .*/Description of \1 mode:/'
+ fi
+ exit $?
+fi
+
+
+# func_mode_execute arg...
+func_mode_execute ()
+{
+ $opt_debug
+ # The first argument is the command name.
+ cmd="$nonopt"
+ test -z "$cmd" && \
+ func_fatal_help "you must specify a COMMAND"
+
+ # Handle -dlopen flags immediately.
+ for file in $opt_dlopen; do
+ test -f "$file" \
+ || func_fatal_help "\`$file' is not a file"
+
+ dir=
+ case $file in
+ *.la)
+ func_resolve_sysroot "$file"
+ file=$func_resolve_sysroot_result
+
+ # Check to see that this really is a libtool archive.
+ func_lalib_unsafe_p "$file" \
+ || func_fatal_help "\`$lib' is not a valid libtool archive"
+
+ # Read the libtool library.
+ dlname=
+ library_names=
+ func_source "$file"
+
+ # Skip this library if it cannot be dlopened.
+ if test -z "$dlname"; then
+ # Warn if it was a shared library.
+ test -n "$library_names" && \
+ func_warning "\`$file' was not linked with \`-export-dynamic'"
+ continue
+ fi
+
+ func_dirname "$file" "" "."
+ dir="$func_dirname_result"
+
+ if test -f "$dir/$objdir/$dlname"; then
+ func_append dir "/$objdir"
+ else
+ if test ! -f "$dir/$dlname"; then
+ func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'"
+ fi
+ fi
+ ;;
+
+ *.lo)
+ # Just add the directory containing the .lo file.
+ func_dirname "$file" "" "."
+ dir="$func_dirname_result"
+ ;;
+
+ *)
+ func_warning "\`-dlopen' is ignored for non-libtool libraries and objects"
+ continue
+ ;;
+ esac
+
+ # Get the absolute pathname.
+ absdir=`cd "$dir" && pwd`
+ test -n "$absdir" && dir="$absdir"
+
+ # Now add the directory to shlibpath_var.
+ if eval "test -z \"\$$shlibpath_var\""; then
+ eval "$shlibpath_var=\"\$dir\""
+ else
+ eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
+ fi
+ done
+
+ # This variable tells wrapper scripts just to set shlibpath_var
+ # rather than running their programs.
+ libtool_execute_magic="$magic"
+
+ # Check if any of the arguments is a wrapper script.
+ args=
+ for file
+ do
+ case $file in
+ -* | *.la | *.lo ) ;;
+ *)
+ # Do a test to see if this is really a libtool program.
+ if func_ltwrapper_script_p "$file"; then
+ func_source "$file"
+ # Transform arg to wrapped name.
+ file="$progdir/$program"
+ elif func_ltwrapper_executable_p "$file"; then
+ func_ltwrapper_scriptname "$file"
+ func_source "$func_ltwrapper_scriptname_result"
+ # Transform arg to wrapped name.
+ file="$progdir/$program"
+ fi
+ ;;
+ esac
+ # Quote arguments (to preserve shell metacharacters).
+ func_append_quoted args "$file"
+ done
+
+ if test "X$opt_dry_run" = Xfalse; then
+ if test -n "$shlibpath_var"; then
+ # Export the shlibpath_var.
+ eval "export $shlibpath_var"
+ fi
+
+ # Restore saved environment variables
+ for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+ do
+ eval "if test \"\${save_$lt_var+set}\" = set; then
+ $lt_var=\$save_$lt_var; export $lt_var
+ else
+ $lt_unset $lt_var
+ fi"
+ done
+
+ # Now prepare to actually exec the command.
+ exec_cmd="\$cmd$args"
+ else
+ # Display what would be done.
+ if test -n "$shlibpath_var"; then
+ eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
+ echo "export $shlibpath_var"
+ fi
+ $ECHO "$cmd$args"
+ exit $EXIT_SUCCESS
+ fi
+}
+
+test "$opt_mode" = execute && func_mode_execute ${1+"$@"}
+
+
+# func_mode_finish arg...
+func_mode_finish ()
+{
+ $opt_debug
+ libs=
+ libdirs=
+ admincmds=
+
+ for opt in "$nonopt" ${1+"$@"}
+ do
+ if test -d "$opt"; then
+ func_append libdirs " $opt"
+
+ elif test -f "$opt"; then
+ if func_lalib_unsafe_p "$opt"; then
+ func_append libs " $opt"
+ else
+ func_warning "\`$opt' is not a valid libtool archive"
+ fi
+
+ else
+ func_fatal_error "invalid argument \`$opt'"
+ fi
+ done
+
+ if test -n "$libs"; then
+ if test -n "$lt_sysroot"; then
+ sysroot_regex=`$ECHO "$lt_sysroot" | $SED "$sed_make_literal_regex"`
+ sysroot_cmd="s/\([ ']\)$sysroot_regex/\1/g;"
+ else
+ sysroot_cmd=
+ fi
+
+ # Remove sysroot references
+ if $opt_dry_run; then
+ for lib in $libs; do
+ echo "removing references to $lt_sysroot and \`=' prefixes from $lib"
+ done
+ else
+ tmpdir=`func_mktempdir`
+ for lib in $libs; do
+ sed -e "${sysroot_cmd} s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \
+ > $tmpdir/tmp-la
+ mv -f $tmpdir/tmp-la $lib
+ done
+ ${RM}r "$tmpdir"
+ fi
+ fi
+
+ if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
+ for libdir in $libdirs; do
+ if test -n "$finish_cmds"; then
+ # Do each command in the finish commands.
+ func_execute_cmds "$finish_cmds" 'admincmds="$admincmds
+'"$cmd"'"'
+ fi
+ if test -n "$finish_eval"; then
+ # Do the single finish_eval.
+ eval cmds=\"$finish_eval\"
+ $opt_dry_run || eval "$cmds" || func_append admincmds "
+ $cmds"
+ fi
+ done
+ fi
+
+ # Exit here if they wanted silent mode.
+ $opt_silent && exit $EXIT_SUCCESS
+
+ if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
+ echo "----------------------------------------------------------------------"
+ echo "Libraries have been installed in:"
+ for libdir in $libdirs; do
+ $ECHO " $libdir"
+ done
+ echo
+ echo "If you ever happen to want to link against installed libraries"
+ echo "in a given directory, LIBDIR, you must either use libtool, and"
+ echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
+ echo "flag during linking and do at least one of the following:"
+ if test -n "$shlibpath_var"; then
+ echo " - add LIBDIR to the \`$shlibpath_var' environment variable"
+ echo " during execution"
+ fi
+ if test -n "$runpath_var"; then
+ echo " - add LIBDIR to the \`$runpath_var' environment variable"
+ echo " during linking"
+ fi
+ if test -n "$hardcode_libdir_flag_spec"; then
+ libdir=LIBDIR
+ eval flag=\"$hardcode_libdir_flag_spec\"
+
+ $ECHO " - use the \`$flag' linker flag"
+ fi
+ if test -n "$admincmds"; then
+ $ECHO " - have your system administrator run these commands:$admincmds"
+ fi
+ if test -f /etc/ld.so.conf; then
+ echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
+ fi
+ echo
+
+ echo "See any operating system documentation about shared libraries for"
+ case $host in
+ solaris2.[6789]|solaris2.1[0-9])
+ echo "more information, such as the ld(1), crle(1) and ld.so(8) manual"
+ echo "pages."
+ ;;
+ *)
+ echo "more information, such as the ld(1) and ld.so(8) manual pages."
+ ;;
+ esac
+ echo "----------------------------------------------------------------------"
+ fi
+ exit $EXIT_SUCCESS
+}
+
+test "$opt_mode" = finish && func_mode_finish ${1+"$@"}
+
+
+# func_mode_install arg...
+func_mode_install ()
+{
+ $opt_debug
+ # There may be an optional sh(1) argument at the beginning of
+ # install_prog (especially on Windows NT).
+ if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
+ # Allow the use of GNU shtool's install command.
+ case $nonopt in *shtool*) :;; *) false;; esac; then
+ # Aesthetically quote it.
+ func_quote_for_eval "$nonopt"
+ install_prog="$func_quote_for_eval_result "
+ arg=$1
+ shift
+ else
+ install_prog=
+ arg=$nonopt
+ fi
+
+ # The real first argument should be the name of the installation program.
+ # Aesthetically quote it.
+ func_quote_for_eval "$arg"
+ func_append install_prog "$func_quote_for_eval_result"
+ install_shared_prog=$install_prog
+ case " $install_prog " in
+ *[\\\ /]cp\ *) install_cp=: ;;
+ *) install_cp=false ;;
+ esac
+
+ # We need to accept at least all the BSD install flags.
+ dest=
+ files=
+ opts=
+ prev=
+ install_type=
+ isdir=no
+ stripme=
+ no_mode=:
+ for arg
+ do
+ arg2=
+ if test -n "$dest"; then
+ func_append files " $dest"
+ dest=$arg
+ continue
+ fi
+
+ case $arg in
+ -d) isdir=yes ;;
+ -f)
+ if $install_cp; then :; else
+ prev=$arg
+ fi
+ ;;
+ -g | -m | -o)
+ prev=$arg
+ ;;
+ -s)
+ stripme=" -s"
+ continue
+ ;;
+ -*)
+ ;;
+ *)
+ # If the previous option needed an argument, then skip it.
+ if test -n "$prev"; then
+ if test "x$prev" = x-m && test -n "$install_override_mode"; then
+ arg2=$install_override_mode
+ no_mode=false
+ fi
+ prev=
+ else
+ dest=$arg
+ continue
+ fi
+ ;;
+ esac
+
+ # Aesthetically quote the argument.
+ func_quote_for_eval "$arg"
+ func_append install_prog " $func_quote_for_eval_result"
+ if test -n "$arg2"; then
+ func_quote_for_eval "$arg2"
+ fi
+ func_append install_shared_prog " $func_quote_for_eval_result"
+ done
+
+ test -z "$install_prog" && \
+ func_fatal_help "you must specify an install program"
+
+ test -n "$prev" && \
+ func_fatal_help "the \`$prev' option requires an argument"
+
+ if test -n "$install_override_mode" && $no_mode; then
+ if $install_cp; then :; else
+ func_quote_for_eval "$install_override_mode"
+ func_append install_shared_prog " -m $func_quote_for_eval_result"
+ fi
+ fi
+
+ if test -z "$files"; then
+ if test -z "$dest"; then
+ func_fatal_help "no file or destination specified"
+ else
+ func_fatal_help "you must specify a destination"
+ fi
+ fi
+
+ # Strip any trailing slash from the destination.
+ func_stripname '' '/' "$dest"
+ dest=$func_stripname_result
+
+ # Check to see that the destination is a directory.
+ test -d "$dest" && isdir=yes
+ if test "$isdir" = yes; then
+ destdir="$dest"
+ destname=
+ else
+ func_dirname_and_basename "$dest" "" "."
+ destdir="$func_dirname_result"
+ destname="$func_basename_result"
+
+ # Not a directory, so check to see that there is only one file specified.
+ set dummy $files; shift
+ test "$#" -gt 1 && \
+ func_fatal_help "\`$dest' is not a directory"
+ fi
+ case $destdir in
+ [\\/]* | [A-Za-z]:[\\/]*) ;;
+ *)
+ for file in $files; do
+ case $file in
+ *.lo) ;;
+ *)
+ func_fatal_help "\`$destdir' must be an absolute directory name"
+ ;;
+ esac
+ done
+ ;;
+ esac
+
+ # This variable tells wrapper scripts just to set variables rather
+ # than running their programs.
+ libtool_install_magic="$magic"
+
+ staticlibs=
+ future_libdirs=
+ current_libdirs=
+ for file in $files; do
+
+ # Do each installation.
+ case $file in
+ *.$libext)
+ # Do the static libraries later.
+ func_append staticlibs " $file"
+ ;;
+
+ *.la)
+ func_resolve_sysroot "$file"
+ file=$func_resolve_sysroot_result
+
+ # Check to see that this really is a libtool archive.
+ func_lalib_unsafe_p "$file" \
+ || func_fatal_help "\`$file' is not a valid libtool archive"
+
+ library_names=
+ old_library=
+ relink_command=
+ func_source "$file"
+
+ # Add the libdir to current_libdirs if it is the destination.
+ if test "X$destdir" = "X$libdir"; then
+ case "$current_libdirs " in
+ *" $libdir "*) ;;
+ *) func_append current_libdirs " $libdir" ;;
+ esac
+ else
+ # Note the libdir as a future libdir.
+ case "$future_libdirs " in
+ *" $libdir "*) ;;
+ *) func_append future_libdirs " $libdir" ;;
+ esac
+ fi
+
+ func_dirname "$file" "/" ""
+ dir="$func_dirname_result"
+ func_append dir "$objdir"
+
+ if test -n "$relink_command"; then
+ # Determine the prefix the user has applied to our future dir.
+ inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"`
+
+ # Don't allow the user to place us outside of our expected
+ # location b/c this prevents finding dependent libraries that
+ # are installed to the same prefix.
+ # At present, this check doesn't affect windows .dll's that
+ # are installed into $libdir/../bin (currently, that works fine)
+ # but it's something to keep an eye on.
+ test "$inst_prefix_dir" = "$destdir" && \
+ func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir"
+
+ if test -n "$inst_prefix_dir"; then
+ # Stick the inst_prefix_dir data into the link command.
+ relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
+ else
+ relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
+ fi
+
+ func_warning "relinking \`$file'"
+ func_show_eval "$relink_command" \
+ 'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"'
+ fi
+
+ # See the names of the shared library.
+ set dummy $library_names; shift
+ if test -n "$1"; then
+ realname="$1"
+ shift
+
+ srcname="$realname"
+ test -n "$relink_command" && srcname="$realname"T
+
+ # Install the shared library and build the symlinks.
+ func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \
+ 'exit $?'
+ tstripme="$stripme"
+ case $host_os in
+ cygwin* | mingw* | pw32* | cegcc*)
+ case $realname in
+ *.dll.a)
+ tstripme=""
+ ;;
+ esac
+ ;;
+ esac
+ if test -n "$tstripme" && test -n "$striplib"; then
+ func_show_eval "$striplib $destdir/$realname" 'exit $?'
+ fi
+
+ if test "$#" -gt 0; then
+ # Delete the old symlinks, and create new ones.
+ # Try `ln -sf' first, because the `ln' binary might depend on
+ # the symlink we replace! Solaris /bin/ln does not understand -f,
+ # so we also need to try rm && ln -s.
+ for linkname
+ do
+ test "$linkname" != "$realname" \
+ && func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })"
+ done
+ fi
+
+ # Do each command in the postinstall commands.
+ lib="$destdir/$realname"
+ func_execute_cmds "$postinstall_cmds" 'exit $?'
+ fi
+
+ # Install the pseudo-library for information purposes.
+ func_basename "$file"
+ name="$func_basename_result"
+ instname="$dir/$name"i
+ func_show_eval "$install_prog $instname $destdir/$name" 'exit $?'
+
+ # Maybe install the static library, too.
+ test -n "$old_library" && func_append staticlibs " $dir/$old_library"
+ ;;
+
+ *.lo)
+ # Install (i.e. copy) a libtool object.
+
+ # Figure out destination file name, if it wasn't already specified.
+ if test -n "$destname"; then
+ destfile="$destdir/$destname"
+ else
+ func_basename "$file"
+ destfile="$func_basename_result"
+ destfile="$destdir/$destfile"
+ fi
+
+ # Deduce the name of the destination old-style object file.
+ case $destfile in
+ *.lo)
+ func_lo2o "$destfile"
+ staticdest=$func_lo2o_result
+ ;;
+ *.$objext)
+ staticdest="$destfile"
+ destfile=
+ ;;
+ *)
+ func_fatal_help "cannot copy a libtool object to \`$destfile'"
+ ;;
+ esac
+
+ # Install the libtool object if requested.
+ test -n "$destfile" && \
+ func_show_eval "$install_prog $file $destfile" 'exit $?'
+
+ # Install the old object if enabled.
+ if test "$build_old_libs" = yes; then
+ # Deduce the name of the old-style object file.
+ func_lo2o "$file"
+ staticobj=$func_lo2o_result
+ func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?'
+ fi
+ exit $EXIT_SUCCESS
+ ;;
+
+ *)
+ # Figure out destination file name, if it wasn't already specified.
+ if test -n "$destname"; then
+ destfile="$destdir/$destname"
+ else
+ func_basename "$file"
+ destfile="$func_basename_result"
+ destfile="$destdir/$destfile"
+ fi
+
+ # If the file is missing, and there is a .exe on the end, strip it
+ # because it is most likely a libtool script we actually want to
+ # install
+ stripped_ext=""
+ case $file in
+ *.exe)
+ if test ! -f "$file"; then
+ func_stripname '' '.exe' "$file"
+ file=$func_stripname_result
+ stripped_ext=".exe"
+ fi
+ ;;
+ esac
+
+ # Do a test to see if this is really a libtool program.
+ case $host in
+ *cygwin* | *mingw*)
+ if func_ltwrapper_executable_p "$file"; then
+ func_ltwrapper_scriptname "$file"
+ wrapper=$func_ltwrapper_scriptname_result
+ else
+ func_stripname '' '.exe' "$file"
+ wrapper=$func_stripname_result
+ fi
+ ;;
+ *)
+ wrapper=$file
+ ;;
+ esac
+ if func_ltwrapper_script_p "$wrapper"; then
+ notinst_deplibs=
+ relink_command=
+
+ func_source "$wrapper"
+
+ # Check the variables that should have been set.
+ test -z "$generated_by_libtool_version" && \
+ func_fatal_error "invalid libtool wrapper script \`$wrapper'"
+
+ finalize=yes
+ for lib in $notinst_deplibs; do
+ # Check to see that each library is installed.
+ libdir=
+ if test -f "$lib"; then
+ func_source "$lib"
+ fi
+ libfile="$libdir/"`$ECHO "$lib" | $SED 's%^.*/%%g'` ### testsuite: skip nested quoting test
+ if test -n "$libdir" && test ! -f "$libfile"; then
+ func_warning "\`$lib' has not been installed in \`$libdir'"
+ finalize=no
+ fi
+ done
+
+ relink_command=
+ func_source "$wrapper"
+
+ outputname=
+ if test "$fast_install" = no && test -n "$relink_command"; then
+ $opt_dry_run || {
+ if test "$finalize" = yes; then
+ tmpdir=`func_mktempdir`
+ func_basename "$file$stripped_ext"
+ file="$func_basename_result"
+ outputname="$tmpdir/$file"
+ # Replace the output file specification.
+ relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'`
+
+ $opt_silent || {
+ func_quote_for_expand "$relink_command"
+ eval "func_echo $func_quote_for_expand_result"
+ }
+ if eval "$relink_command"; then :
+ else
+ func_error "error: relink \`$file' with the above command before installing it"
+ $opt_dry_run || ${RM}r "$tmpdir"
+ continue
+ fi
+ file="$outputname"
+ else
+ func_warning "cannot relink \`$file'"
+ fi
+ }
+ else
+ # Install the binary that we compiled earlier.
+ file=`$ECHO "$file$stripped_ext" | $SED "s%\([^/]*\)$%$objdir/\1%"`
+ fi
+ fi
+
+ # remove .exe since cygwin /usr/bin/install will append another
+ # one anyway
+ case $install_prog,$host in
+ */usr/bin/install*,*cygwin*)
+ case $file:$destfile in
+ *.exe:*.exe)
+ # this is ok
+ ;;
+ *.exe:*)
+ destfile=$destfile.exe
+ ;;
+ *:*.exe)
+ func_stripname '' '.exe' "$destfile"
+ destfile=$func_stripname_result
+ ;;
+ esac
+ ;;
+ esac
+ func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?'
+ $opt_dry_run || if test -n "$outputname"; then
+ ${RM}r "$tmpdir"
+ fi
+ ;;
+ esac
+ done
+
+ for file in $staticlibs; do
+ func_basename "$file"
+ name="$func_basename_result"
+
+ # Set up the ranlib parameters.
+ oldlib="$destdir/$name"
+ func_to_tool_file "$oldlib" func_convert_file_msys_to_w32
+ tool_oldlib=$func_to_tool_file_result
+
+ func_show_eval "$install_prog \$file \$oldlib" 'exit $?'
+
+ if test -n "$stripme" && test -n "$old_striplib"; then
+ func_show_eval "$old_striplib $tool_oldlib" 'exit $?'
+ fi
+
+ # Do each command in the postinstall commands.
+ func_execute_cmds "$old_postinstall_cmds" 'exit $?'
+ done
+
+ test -n "$future_libdirs" && \
+ func_warning "remember to run \`$progname --finish$future_libdirs'"
+
+ if test -n "$current_libdirs"; then
+ # Maybe just do a dry run.
+ $opt_dry_run && current_libdirs=" -n$current_libdirs"
+ exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
+ else
+ exit $EXIT_SUCCESS
+ fi
+}
+
+test "$opt_mode" = install && func_mode_install ${1+"$@"}
+
+
+# func_generate_dlsyms outputname originator pic_p
+# Extract symbols from dlprefiles and create ${outputname}S.o with
+# a dlpreopen symbol table.
+func_generate_dlsyms ()
+{
+ $opt_debug
+ my_outputname="$1"
+ my_originator="$2"
+ my_pic_p="${3-no}"
+ my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'`
+ my_dlsyms=
+
+ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+ if test -n "$NM" && test -n "$global_symbol_pipe"; then
+ my_dlsyms="${my_outputname}S.c"
+ else
+ func_error "not configured to extract global symbols from dlpreopened files"
+ fi
+ fi
+
+ if test -n "$my_dlsyms"; then
+ case $my_dlsyms in
+ "") ;;
+ *.c)
+ # Discover the nlist of each of the dlfiles.
+ nlist="$output_objdir/${my_outputname}.nm"
+
+ func_show_eval "$RM $nlist ${nlist}S ${nlist}T"
+
+ # Parse the name list into a source file.
+ func_verbose "creating $output_objdir/$my_dlsyms"
+
+ $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\
+/* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */
+/* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */
+
+#ifdef __cplusplus
+extern \"C\" {
+#endif
+
+#if defined(__GNUC__) && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4))
+#pragma GCC diagnostic ignored \"-Wstrict-prototypes\"
+#endif
+
+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */
+#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
+/* DATA imports from DLLs on WIN32 con't be const, because runtime
+ relocations are performed -- see ld's documentation on pseudo-relocs. */
+# define LT_DLSYM_CONST
+#elif defined(__osf__)
+/* This system does not cope well with relocations in const data. */
+# define LT_DLSYM_CONST
+#else
+# define LT_DLSYM_CONST const
+#endif
+
+/* External symbol declarations for the compiler. */\
+"
+
+ if test "$dlself" = yes; then
+ func_verbose "generating symbol list for \`$output'"
+
+ $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
+
+ # Add our own program objects to the symbol list.
+ progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP`
+ for progfile in $progfiles; do
+ func_to_tool_file "$progfile" func_convert_file_msys_to_w32
+ func_verbose "extracting global C symbols from \`$func_to_tool_file_result'"
+ $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'"
+ done
+
+ if test -n "$exclude_expsyms"; then
+ $opt_dry_run || {
+ eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
+ eval '$MV "$nlist"T "$nlist"'
+ }
+ fi
+
+ if test -n "$export_symbols_regex"; then
+ $opt_dry_run || {
+ eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
+ eval '$MV "$nlist"T "$nlist"'
+ }
+ fi
+
+ # Prepare the list of exported symbols
+ if test -z "$export_symbols"; then
+ export_symbols="$output_objdir/$outputname.exp"
+ $opt_dry_run || {
+ $RM $export_symbols
+ eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
+ case $host in
+ *cygwin* | *mingw* | *cegcc* )
+ eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+ eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
+ ;;
+ esac
+ }
+ else
+ $opt_dry_run || {
+ eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
+ eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
+ eval '$MV "$nlist"T "$nlist"'
+ case $host in
+ *cygwin* | *mingw* | *cegcc* )
+ eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+ eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
+ ;;
+ esac
+ }
+ fi
+ fi
+
+ for dlprefile in $dlprefiles; do
+ func_verbose "extracting global C symbols from \`$dlprefile'"
+ func_basename "$dlprefile"
+ name="$func_basename_result"
+ case $host in
+ *cygwin* | *mingw* | *cegcc* )
+ # if an import library, we need to obtain dlname
+ if func_win32_import_lib_p "$dlprefile"; then
+ func_tr_sh "$dlprefile"
+ eval "curr_lafile=\$libfile_$func_tr_sh_result"
+ dlprefile_dlbasename=""
+ if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then
+ # Use subshell, to avoid clobbering current variable values
+ dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"`
+ if test -n "$dlprefile_dlname" ; then
+ func_basename "$dlprefile_dlname"
+ dlprefile_dlbasename="$func_basename_result"
+ else
+ # no lafile. user explicitly requested -dlpreopen <import library>.
+ $sharedlib_from_linklib_cmd "$dlprefile"
+ dlprefile_dlbasename=$sharedlib_from_linklib_result
+ fi
+ fi
+ $opt_dry_run || {
+ if test -n "$dlprefile_dlbasename" ; then
+ eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"'
+ else
+ func_warning "Could not compute DLL name from $name"
+ eval '$ECHO ": $name " >> "$nlist"'
+ fi
+ func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
+ eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe |
+ $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >> '$nlist'"
+ }
+ else # not an import lib
+ $opt_dry_run || {
+ eval '$ECHO ": $name " >> "$nlist"'
+ func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
+ eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
+ }
+ fi
+ ;;
+ *)
+ $opt_dry_run || {
+ eval '$ECHO ": $name " >> "$nlist"'
+ func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
+ eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
+ }
+ ;;
+ esac
+ done
+
+ $opt_dry_run || {
+ # Make sure we have at least an empty file.
+ test -f "$nlist" || : > "$nlist"
+
+ if test -n "$exclude_expsyms"; then
+ $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
+ $MV "$nlist"T "$nlist"
+ fi
+
+ # Try sorting and uniquifying the output.
+ if $GREP -v "^: " < "$nlist" |
+ if sort -k 3 </dev/null >/dev/null 2>&1; then
+ sort -k 3
+ else
+ sort +2
+ fi |
+ uniq > "$nlist"S; then
+ :
+ else
+ $GREP -v "^: " < "$nlist" > "$nlist"S
+ fi
+
+ if test -f "$nlist"S; then
+ eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"'
+ else
+ echo '/* NONE */' >> "$output_objdir/$my_dlsyms"
+ fi
+
+ echo >> "$output_objdir/$my_dlsyms" "\
+
+/* The mapping between symbol names and symbols. */
+typedef struct {
+ const char *name;
+ void *address;
+} lt_dlsymlist;
+extern LT_DLSYM_CONST lt_dlsymlist
+lt_${my_prefix}_LTX_preloaded_symbols[];
+LT_DLSYM_CONST lt_dlsymlist
+lt_${my_prefix}_LTX_preloaded_symbols[] =
+{\
+ { \"$my_originator\", (void *) 0 },"
+
+ case $need_lib_prefix in
+ no)
+ eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms"
+ ;;
+ *)
+ eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms"
+ ;;
+ esac
+ echo >> "$output_objdir/$my_dlsyms" "\
+ {0, (void *) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+ return lt_${my_prefix}_LTX_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif\
+"
+ } # !$opt_dry_run
+
+ pic_flag_for_symtable=
+ case "$compile_command " in
+ *" -static "*) ;;
+ *)
+ case $host in
+ # compiling the symbol table file with pic_flag works around
+ # a FreeBSD bug that causes programs to crash when -lm is
+ # linked before any other PIC object. But we must not use
+ # pic_flag when linking with -static. The problem exists in
+ # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
+ *-*-freebsd2.*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
+ pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;;
+ *-*-hpux*)
+ pic_flag_for_symtable=" $pic_flag" ;;
+ *)
+ if test "X$my_pic_p" != Xno; then
+ pic_flag_for_symtable=" $pic_flag"
+ fi
+ ;;
+ esac
+ ;;
+ esac
+ symtab_cflags=
+ for arg in $LTCFLAGS; do
+ case $arg in
+ -pie | -fpie | -fPIE) ;;
+ *) func_append symtab_cflags " $arg" ;;
+ esac
+ done
+
+ # Now compile the dynamic symbol file.
+ func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?'
+
+ # Clean up the generated files.
+ func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"'
+
+ # Transform the symbol file into the correct name.
+ symfileobj="$output_objdir/${my_outputname}S.$objext"
+ case $host in
+ *cygwin* | *mingw* | *cegcc* )
+ if test -f "$output_objdir/$my_outputname.def"; then
+ compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+ finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+ else
+ compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+ finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+ fi
+ ;;
+ *)
+ compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+ finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+ ;;
+ esac
+ ;;
+ *-*-freebsd*)
+ # FreeBSD doesn't need this...
+ ;;
+ *)
+ func_fatal_error "unknown suffix for \`$my_dlsyms'"
+ ;;
+ esac
+ else
+ # We keep going just in case the user didn't refer to
+ # lt_preloaded_symbols. The linker will fail if global_symbol_pipe
+ # really was required.
+
+ # Nullify the symbol file.
+ compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"`
+ finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"`
+ fi
+}
+
+# func_win32_libid arg
+# return the library type of file 'arg'
+#
+# Need a lot of goo to handle *both* DLLs and import libs
+# Has to be a shell function in order to 'eat' the argument
+# that is supplied when $file_magic_command is called.
+# Despite the name, also deal with 64 bit binaries.
+func_win32_libid ()
+{
+ $opt_debug
+ win32_libid_type="unknown"
+ win32_fileres=`file -L $1 2>/dev/null`
+ case $win32_fileres in
+ *ar\ archive\ import\ library*) # definitely import
+ win32_libid_type="x86 archive import"
+ ;;
+ *ar\ archive*) # could be an import, or static
+ # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD.
+ if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
+ $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then
+ func_to_tool_file "$1" func_convert_file_msys_to_w32
+ win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" |
+ $SED -n -e '
+ 1,100{
+ / I /{
+ s,.*,import,
+ p
+ q
+ }
+ }'`
+ case $win32_nmres in
+ import*) win32_libid_type="x86 archive import";;
+ *) win32_libid_type="x86 archive static";;
+ esac
+ fi
+ ;;
+ *DLL*)
+ win32_libid_type="x86 DLL"
+ ;;
+ *executable*) # but shell scripts are "executable" too...
+ case $win32_fileres in
+ *MS\ Windows\ PE\ Intel*)
+ win32_libid_type="x86 DLL"
+ ;;
+ esac
+ ;;
+ esac
+ $ECHO "$win32_libid_type"
+}
+
+# func_cygming_dll_for_implib ARG
+#
+# Platform-specific function to extract the
+# name of the DLL associated with the specified
+# import library ARG.
+# Invoked by eval'ing the libtool variable
+# $sharedlib_from_linklib_cmd
+# Result is available in the variable
+# $sharedlib_from_linklib_result
+func_cygming_dll_for_implib ()
+{
+ $opt_debug
+ sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"`
+}
+
+# func_cygming_dll_for_implib_fallback_core SECTION_NAME LIBNAMEs
+#
+# The is the core of a fallback implementation of a
+# platform-specific function to extract the name of the
+# DLL associated with the specified import library LIBNAME.
+#
+# SECTION_NAME is either .idata$6 or .idata$7, depending
+# on the platform and compiler that created the implib.
+#
+# Echos the name of the DLL associated with the
+# specified import library.
+func_cygming_dll_for_implib_fallback_core ()
+{
+ $opt_debug
+ match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"`
+ $OBJDUMP -s --section "$1" "$2" 2>/dev/null |
+ $SED '/^Contents of section '"$match_literal"':/{
+ # Place marker at beginning of archive member dllname section
+ s/.*/====MARK====/
+ p
+ d
+ }
+ # These lines can sometimes be longer than 43 characters, but
+ # are always uninteresting
+ /:[ ]*file format pe[i]\{,1\}-/d
+ /^In archive [^:]*:/d
+ # Ensure marker is printed
+ /^====MARK====/p
+ # Remove all lines with less than 43 characters
+ /^.\{43\}/!d
+ # From remaining lines, remove first 43 characters
+ s/^.\{43\}//' |
+ $SED -n '
+ # Join marker and all lines until next marker into a single line
+ /^====MARK====/ b para
+ H
+ $ b para
+ b
+ :para
+ x
+ s/\n//g
+ # Remove the marker
+ s/^====MARK====//
+ # Remove trailing dots and whitespace
+ s/[\. \t]*$//
+ # Print
+ /./p' |
+ # we now have a list, one entry per line, of the stringified
+ # contents of the appropriate section of all members of the
+ # archive which possess that section. Heuristic: eliminate
+ # all those which have a first or second character that is
+ # a '.' (that is, objdump's representation of an unprintable
+ # character.) This should work for all archives with less than
+ # 0x302f exports -- but will fail for DLLs whose name actually
+ # begins with a literal '.' or a single character followed by
+ # a '.'.
+ #
+ # Of those that remain, print the first one.
+ $SED -e '/^\./d;/^.\./d;q'
+}
+
+# func_cygming_gnu_implib_p ARG
+# This predicate returns with zero status (TRUE) if
+# ARG is a GNU/binutils-style import library. Returns
+# with nonzero status (FALSE) otherwise.
+func_cygming_gnu_implib_p ()
+{
+ $opt_debug
+ func_to_tool_file "$1" func_convert_file_msys_to_w32
+ func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'`
+ test -n "$func_cygming_gnu_implib_tmp"
+}
+
+# func_cygming_ms_implib_p ARG
+# This predicate returns with zero status (TRUE) if
+# ARG is an MS-style import library. Returns
+# with nonzero status (FALSE) otherwise.
+func_cygming_ms_implib_p ()
+{
+ $opt_debug
+ func_to_tool_file "$1" func_convert_file_msys_to_w32
+ func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'`
+ test -n "$func_cygming_ms_implib_tmp"
+}
+
+# func_cygming_dll_for_implib_fallback ARG
+# Platform-specific function to extract the
+# name of the DLL associated with the specified
+# import library ARG.
+#
+# This fallback implementation is for use when $DLLTOOL
+# does not support the --identify-strict option.
+# Invoked by eval'ing the libtool variable
+# $sharedlib_from_linklib_cmd
+# Result is available in the variable
+# $sharedlib_from_linklib_result
+func_cygming_dll_for_implib_fallback ()
+{
+ $opt_debug
+ if func_cygming_gnu_implib_p "$1" ; then
+ # binutils import library
+ sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"`
+ elif func_cygming_ms_implib_p "$1" ; then
+ # ms-generated import library
+ sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"`
+ else
+ # unknown
+ sharedlib_from_linklib_result=""
+ fi
+}
+
+
+# func_extract_an_archive dir oldlib
+func_extract_an_archive ()
+{
+ $opt_debug
+ f_ex_an_ar_dir="$1"; shift
+ f_ex_an_ar_oldlib="$1"
+ if test "$lock_old_archive_extraction" = yes; then
+ lockfile=$f_ex_an_ar_oldlib.lock
+ until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
+ func_echo "Waiting for $lockfile to be removed"
+ sleep 2
+ done
+ fi
+ func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \
+ 'stat=$?; rm -f "$lockfile"; exit $stat'
+ if test "$lock_old_archive_extraction" = yes; then
+ $opt_dry_run || rm -f "$lockfile"
+ fi
+ if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
+ :
+ else
+ func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib"
+ fi
+}
+
+
+# func_extract_archives gentop oldlib ...
+func_extract_archives ()
+{
+ $opt_debug
+ my_gentop="$1"; shift
+ my_oldlibs=${1+"$@"}
+ my_oldobjs=""
+ my_xlib=""
+ my_xabs=""
+ my_xdir=""
+
+ for my_xlib in $my_oldlibs; do
+ # Extract the objects.
+ case $my_xlib in
+ [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
+ *) my_xabs=`pwd`"/$my_xlib" ;;
+ esac
+ func_basename "$my_xlib"
+ my_xlib="$func_basename_result"
+ my_xlib_u=$my_xlib
+ while :; do
+ case " $extracted_archives " in
+ *" $my_xlib_u "*)
+ func_arith $extracted_serial + 1
+ extracted_serial=$func_arith_result
+ my_xlib_u=lt$extracted_serial-$my_xlib ;;
+ *) break ;;
+ esac
+ done
+ extracted_archives="$extracted_archives $my_xlib_u"
+ my_xdir="$my_gentop/$my_xlib_u"
+
+ func_mkdir_p "$my_xdir"
+
+ case $host in
+ *-darwin*)
+ func_verbose "Extracting $my_xabs"
+ # Do not bother doing anything if just a dry run
+ $opt_dry_run || {
+ darwin_orig_dir=`pwd`
+ cd $my_xdir || exit $?
+ darwin_archive=$my_xabs
+ darwin_curdir=`pwd`
+ darwin_base_archive=`basename "$darwin_archive"`
+ darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true`
+ if test -n "$darwin_arches"; then
+ darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'`
+ darwin_arch=
+ func_verbose "$darwin_base_archive has multiple architectures $darwin_arches"
+ for darwin_arch in $darwin_arches ; do
+ func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+ $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
+ cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+ func_extract_an_archive "`pwd`" "${darwin_base_archive}"
+ cd "$darwin_curdir"
+ $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
+ done # $darwin_arches
+ ## Okay now we've a bunch of thin objects, gotta fatten them up :)
+ darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u`
+ darwin_file=
+ darwin_files=
+ for darwin_file in $darwin_filelist; do
+ darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP`
+ $LIPO -create -output "$darwin_file" $darwin_files
+ done # $darwin_filelist
+ $RM -rf unfat-$$
+ cd "$darwin_orig_dir"
+ else
+ cd $darwin_orig_dir
+ func_extract_an_archive "$my_xdir" "$my_xabs"
+ fi # $darwin_arches
+ } # !$opt_dry_run
+ ;;
+ *)
+ func_extract_an_archive "$my_xdir" "$my_xabs"
+ ;;
+ esac
+ my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP`
+ done
+
+ func_extract_archives_result="$my_oldobjs"
+}
+
+
+# func_emit_wrapper [arg=no]
+#
+# Emit a libtool wrapper script on stdout.
+# Don't directly open a file because we may want to
+# incorporate the script contents within a cygwin/mingw
+# wrapper executable. Must ONLY be called from within
+# func_mode_link because it depends on a number of variables
+# set therein.
+#
+# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
+# variable will take. If 'yes', then the emitted script
+# will assume that the directory in which it is stored is
+# the $objdir directory. This is a cygwin/mingw-specific
+# behavior.
+func_emit_wrapper ()
+{
+ func_emit_wrapper_arg1=${1-no}
+
+ $ECHO "\
+#! $SHELL
+
+# $output - temporary wrapper script for $objdir/$outputname
+# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+#
+# The $output program cannot be directly executed until all the libtool
+# libraries that it depends on are installed.
+#
+# This wrapper script should never be moved out of the build directory.
+# If it is, it will not operate correctly.
+
+# Sed substitution that helps us do robust quoting. It backslashifies
+# metacharacters that are still active within double-quoted strings.
+sed_quote_subst='$sed_quote_subst'
+
+# Be Bourne compatible
+if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+ # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '\${1+\"\$@\"}'='\"\$@\"'
+ setopt NO_GLOB_SUBST
+else
+ case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
+fi
+BIN_SH=xpg4; export BIN_SH # for Tru64
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+relink_command=\"$relink_command\"
+
+# This environment variable determines our operation mode.
+if test \"\$libtool_install_magic\" = \"$magic\"; then
+ # install mode needs the following variables:
+ generated_by_libtool_version='$macro_version'
+ notinst_deplibs='$notinst_deplibs'
+else
+ # When we are sourced in execute mode, \$file and \$ECHO are already set.
+ if test \"\$libtool_execute_magic\" != \"$magic\"; then
+ file=\"\$0\""
+
+ qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"`
+ $ECHO "\
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+ eval 'cat <<_LTECHO_EOF
+\$1
+_LTECHO_EOF'
+}
+ ECHO=\"$qECHO\"
+ fi
+
+# Very basic option parsing. These options are (a) specific to
+# the libtool wrapper, (b) are identical between the wrapper
+# /script/ and the wrapper /executable/ which is used only on
+# windows platforms, and (c) all begin with the string "--lt-"
+# (application programs are unlikely to have options which match
+# this pattern).
+#
+# There are only two supported options: --lt-debug and
+# --lt-dump-script. There is, deliberately, no --lt-help.
+#
+# The first argument to this parsing function should be the
+# script's $0 value, followed by "$@".
+lt_option_debug=
+func_parse_lt_options ()
+{
+ lt_script_arg0=\$0
+ shift
+ for lt_opt
+ do
+ case \"\$lt_opt\" in
+ --lt-debug) lt_option_debug=1 ;;
+ --lt-dump-script)
+ lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\`
+ test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=.
+ lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\`
+ cat \"\$lt_dump_D/\$lt_dump_F\"
+ exit 0
+ ;;
+ --lt-*)
+ \$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2
+ exit 1
+ ;;
+ esac
+ done
+
+ # Print the debug banner immediately:
+ if test -n \"\$lt_option_debug\"; then
+ echo \"${outputname}:${output}:\${LINENO}: libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\" 1>&2
+ fi
+}
+
+# Used when --lt-debug. Prints its arguments to stdout
+# (redirection is the responsibility of the caller)
+func_lt_dump_args ()
+{
+ lt_dump_args_N=1;
+ for lt_arg
+ do
+ \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[\$lt_dump_args_N]: \$lt_arg\"
+ lt_dump_args_N=\`expr \$lt_dump_args_N + 1\`
+ done
+}
+
+# Core function for launching the target application
+func_exec_program_core ()
+{
+"
+ case $host in
+ # Backslashes separate directories on plain windows
+ *-*-mingw | *-*-os2* | *-cegcc*)
+ $ECHO "\
+ if test -n \"\$lt_option_debug\"; then
+ \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir\\\\\$program\" 1>&2
+ func_lt_dump_args \${1+\"\$@\"} 1>&2
+ fi
+ exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
+"
+ ;;
+
+ *)
+ $ECHO "\
+ if test -n \"\$lt_option_debug\"; then
+ \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir/\$program\" 1>&2
+ func_lt_dump_args \${1+\"\$@\"} 1>&2
+ fi
+ exec \"\$progdir/\$program\" \${1+\"\$@\"}
+"
+ ;;
+ esac
+ $ECHO "\
+ \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
+ exit 1
+}
+
+# A function to encapsulate launching the target application
+# Strips options in the --lt-* namespace from \$@ and
+# launches target application with the remaining arguments.
+func_exec_program ()
+{
+ case \" \$* \" in
+ *\\ --lt-*)
+ for lt_wr_arg
+ do
+ case \$lt_wr_arg in
+ --lt-*) ;;
+ *) set x \"\$@\" \"\$lt_wr_arg\"; shift;;
+ esac
+ shift
+ done ;;
+ esac
+ func_exec_program_core \${1+\"\$@\"}
+}
+
+ # Parse options
+ func_parse_lt_options \"\$0\" \${1+\"\$@\"}
+
+ # Find the directory that this script lives in.
+ thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\`
+ test \"x\$thisdir\" = \"x\$file\" && thisdir=.
+
+ # Follow symbolic links until we get to the real thisdir.
+ file=\`ls -ld \"\$file\" | $SED -n 's/.*-> //p'\`
+ while test -n \"\$file\"; do
+ destdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*\$%%'\`
+
+ # If there was a directory component, then change thisdir.
+ if test \"x\$destdir\" != \"x\$file\"; then
+ case \"\$destdir\" in
+ [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
+ *) thisdir=\"\$thisdir/\$destdir\" ;;
+ esac
+ fi
+
+ file=\`\$ECHO \"\$file\" | $SED 's%^.*/%%'\`
+ file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\`
+ done
+
+ # Usually 'no', except on cygwin/mingw when embedded into
+ # the cwrapper.
+ WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1
+ if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then
+ # special case for '.'
+ if test \"\$thisdir\" = \".\"; then
+ thisdir=\`pwd\`
+ fi
+ # remove .libs from thisdir
+ case \"\$thisdir\" in
+ *[\\\\/]$objdir ) thisdir=\`\$ECHO \"\$thisdir\" | $SED 's%[\\\\/][^\\\\/]*$%%'\` ;;
+ $objdir ) thisdir=. ;;
+ esac
+ fi
+
+ # Try to get the absolute directory name.
+ absdir=\`cd \"\$thisdir\" && pwd\`
+ test -n \"\$absdir\" && thisdir=\"\$absdir\"
+"
+
+ if test "$fast_install" = yes; then
+ $ECHO "\
+ program=lt-'$outputname'$exeext
+ progdir=\"\$thisdir/$objdir\"
+
+ if test ! -f \"\$progdir/\$program\" ||
+ { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
+ test \"X\$file\" != \"X\$progdir/\$program\"; }; then
+
+ file=\"\$\$-\$program\"
+
+ if test ! -d \"\$progdir\"; then
+ $MKDIR \"\$progdir\"
+ else
+ $RM \"\$progdir/\$file\"
+ fi"
+
+ $ECHO "\
+
+ # relink executable if necessary
+ if test -n \"\$relink_command\"; then
+ if relink_command_output=\`eval \$relink_command 2>&1\`; then :
+ else
+ $ECHO \"\$relink_command_output\" >&2
+ $RM \"\$progdir/\$file\"
+ exit 1
+ fi
+ fi
+
+ $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
+ { $RM \"\$progdir/\$program\";
+ $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; }
+ $RM \"\$progdir/\$file\"
+ fi"
+ else
+ $ECHO "\
+ program='$outputname'
+ progdir=\"\$thisdir/$objdir\"
+"
+ fi
+
+ $ECHO "\
+
+ if test -f \"\$progdir/\$program\"; then"
+
+ # fixup the dll searchpath if we need to.
+ #
+ # Fix the DLL searchpath if we need to. Do this before prepending
+ # to shlibpath, because on Windows, both are PATH and uninstalled
+ # libraries must come first.
+ if test -n "$dllsearchpath"; then
+ $ECHO "\
+ # Add the dll search path components to the executable PATH
+ PATH=$dllsearchpath:\$PATH
+"
+ fi
+
+ # Export our shlibpath_var if we have one.
+ if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+ $ECHO "\
+ # Add our own library path to $shlibpath_var
+ $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
+
+ # Some systems cannot cope with colon-terminated $shlibpath_var
+ # The second colon is a workaround for a bug in BeOS R4 sed
+ $shlibpath_var=\`\$ECHO \"\$$shlibpath_var\" | $SED 's/::*\$//'\`
+
+ export $shlibpath_var
+"
+ fi
+
+ $ECHO "\
+ if test \"\$libtool_execute_magic\" != \"$magic\"; then
+ # Run the actual program with our arguments.
+ func_exec_program \${1+\"\$@\"}
+ fi
+ else
+ # The program doesn't exist.
+ \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
+ \$ECHO \"This script is just a wrapper for \$program.\" 1>&2
+ \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
+ exit 1
+ fi
+fi\
+"
+}
+
+
+# func_emit_cwrapperexe_src
+# emit the source code for a wrapper executable on stdout
+# Must ONLY be called from within func_mode_link because
+# it depends on a number of variable set therein.
+func_emit_cwrapperexe_src ()
+{
+ cat <<EOF
+
+/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
+ Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+
+ The $output program cannot be directly executed until all the libtool
+ libraries that it depends on are installed.
+
+ This wrapper executable should never be moved out of the build directory.
+ If it is, it will not operate correctly.
+*/
+EOF
+ cat <<"EOF"
+#ifdef _MSC_VER
+# define _CRT_SECURE_NO_DEPRECATE 1
+#endif
+#include <stdio.h>
+#include <stdlib.h>
+#ifdef _MSC_VER
+# include <direct.h>
+# include <process.h>
+# include <io.h>
+#else
+# include <unistd.h>
+# include <stdint.h>
+# ifdef __CYGWIN__
+# include <io.h>
+# endif
+#endif
+#include <malloc.h>
+#include <stdarg.h>
+#include <assert.h>
+#include <string.h>
+#include <ctype.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <sys/stat.h>
+
+/* declarations of non-ANSI functions */
+#if defined(__MINGW32__)
+# ifdef __STRICT_ANSI__
+int _putenv (const char *);
+# endif
+#elif defined(__CYGWIN__)
+# ifdef __STRICT_ANSI__
+char *realpath (const char *, char *);
+int putenv (char *);
+int setenv (const char *, const char *, int);
+# endif
+/* #elif defined (other platforms) ... */
+#endif
+
+/* portability defines, excluding path handling macros */
+#if defined(_MSC_VER)
+# define setmode _setmode
+# define stat _stat
+# define chmod _chmod
+# define getcwd _getcwd
+# define putenv _putenv
+# define S_IXUSR _S_IEXEC
+# ifndef _INTPTR_T_DEFINED
+# define _INTPTR_T_DEFINED
+# define intptr_t int
+# endif
+#elif defined(__MINGW32__)
+# define setmode _setmode
+# define stat _stat
+# define chmod _chmod
+# define getcwd _getcwd
+# define putenv _putenv
+#elif defined(__CYGWIN__)
+# define HAVE_SETENV
+# define FOPEN_WB "wb"
+/* #elif defined (other platforms) ... */
+#endif
+
+#if defined(PATH_MAX)
+# define LT_PATHMAX PATH_MAX
+#elif defined(MAXPATHLEN)
+# define LT_PATHMAX MAXPATHLEN
+#else
+# define LT_PATHMAX 1024
+#endif
+
+#ifndef S_IXOTH
+# define S_IXOTH 0
+#endif
+#ifndef S_IXGRP
+# define S_IXGRP 0
+#endif
+
+/* path handling portability macros */
+#ifndef DIR_SEPARATOR
+# define DIR_SEPARATOR '/'
+# define PATH_SEPARATOR ':'
+#endif
+
+#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
+ defined (__OS2__)
+# define HAVE_DOS_BASED_FILE_SYSTEM
+# define FOPEN_WB "wb"
+# ifndef DIR_SEPARATOR_2
+# define DIR_SEPARATOR_2 '\\'
+# endif
+# ifndef PATH_SEPARATOR_2
+# define PATH_SEPARATOR_2 ';'
+# endif
+#endif
+
+#ifndef DIR_SEPARATOR_2
+# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
+#else /* DIR_SEPARATOR_2 */
+# define IS_DIR_SEPARATOR(ch) \
+ (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
+#endif /* DIR_SEPARATOR_2 */
+
+#ifndef PATH_SEPARATOR_2
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
+#else /* PATH_SEPARATOR_2 */
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
+#endif /* PATH_SEPARATOR_2 */
+
+#ifndef FOPEN_WB
+# define FOPEN_WB "w"
+#endif
+#ifndef _O_BINARY
+# define _O_BINARY 0
+#endif
+
+#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type)))
+#define XFREE(stale) do { \
+ if (stale) { free ((void *) stale); stale = 0; } \
+} while (0)
+
+#if defined(LT_DEBUGWRAPPER)
+static int lt_debug = 1;
+#else
+static int lt_debug = 0;
+#endif
+
+const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */
+
+void *xmalloc (size_t num);
+char *xstrdup (const char *string);
+const char *base_name (const char *name);
+char *find_executable (const char *wrapper);
+char *chase_symlinks (const char *pathspec);
+int make_executable (const char *path);
+int check_executable (const char *path);
+char *strendzap (char *str, const char *pat);
+void lt_debugprintf (const char *file, int line, const char *fmt, ...);
+void lt_fatal (const char *file, int line, const char *message, ...);
+static const char *nonnull (const char *s);
+static const char *nonempty (const char *s);
+void lt_setenv (const char *name, const char *value);
+char *lt_extend_str (const char *orig_value, const char *add, int to_end);
+void lt_update_exe_path (const char *name, const char *value);
+void lt_update_lib_path (const char *name, const char *value);
+char **prepare_spawn (char **argv);
+void lt_dump_script (FILE *f);
+EOF
+
+ cat <<EOF
+volatile const char * MAGIC_EXE = "$magic_exe";
+const char * LIB_PATH_VARNAME = "$shlibpath_var";
+EOF
+
+ if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+ func_to_host_path "$temp_rpath"
+ cat <<EOF
+const char * LIB_PATH_VALUE = "$func_to_host_path_result";
+EOF
+ else
+ cat <<"EOF"
+const char * LIB_PATH_VALUE = "";
+EOF
+ fi
+
+ if test -n "$dllsearchpath"; then
+ func_to_host_path "$dllsearchpath:"
+ cat <<EOF
+const char * EXE_PATH_VARNAME = "PATH";
+const char * EXE_PATH_VALUE = "$func_to_host_path_result";
+EOF
+ else
+ cat <<"EOF"
+const char * EXE_PATH_VARNAME = "";
+const char * EXE_PATH_VALUE = "";
+EOF
+ fi
+
+ if test "$fast_install" = yes; then
+ cat <<EOF
+const char * TARGET_PROGRAM_NAME = "lt-$outputname"; /* hopefully, no .exe */
+EOF
+ else
+ cat <<EOF
+const char * TARGET_PROGRAM_NAME = "$outputname"; /* hopefully, no .exe */
+EOF
+ fi
+
+
+ cat <<"EOF"
+
+#define LTWRAPPER_OPTION_PREFIX "--lt-"
+
+static const char *ltwrapper_option_prefix = LTWRAPPER_OPTION_PREFIX;
+static const char *dumpscript_opt = LTWRAPPER_OPTION_PREFIX "dump-script";
+static const char *debug_opt = LTWRAPPER_OPTION_PREFIX "debug";
+
+int
+main (int argc, char *argv[])
+{
+ char **newargz;
+ int newargc;
+ char *tmp_pathspec;
+ char *actual_cwrapper_path;
+ char *actual_cwrapper_name;
+ char *target_name;
+ char *lt_argv_zero;
+ intptr_t rval = 127;
+
+ int i;
+
+ program_name = (char *) xstrdup (base_name (argv[0]));
+ newargz = XMALLOC (char *, argc + 1);
+
+ /* very simple arg parsing; don't want to rely on getopt
+ * also, copy all non cwrapper options to newargz, except
+ * argz[0], which is handled differently
+ */
+ newargc=0;
+ for (i = 1; i < argc; i++)
+ {
+ if (strcmp (argv[i], dumpscript_opt) == 0)
+ {
+EOF
+ case "$host" in
+ *mingw* | *cygwin* )
+ # make stdout use "unix" line endings
+ echo " setmode(1,_O_BINARY);"
+ ;;
+ esac
+
+ cat <<"EOF"
+ lt_dump_script (stdout);
+ return 0;
+ }
+ if (strcmp (argv[i], debug_opt) == 0)
+ {
+ lt_debug = 1;
+ continue;
+ }
+ if (strcmp (argv[i], ltwrapper_option_prefix) == 0)
+ {
+ /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
+ namespace, but it is not one of the ones we know about and
+ have already dealt with, above (inluding dump-script), then
+ report an error. Otherwise, targets might begin to believe
+ they are allowed to use options in the LTWRAPPER_OPTION_PREFIX
+ namespace. The first time any user complains about this, we'll
+ need to make LTWRAPPER_OPTION_PREFIX a configure-time option
+ or a configure.ac-settable value.
+ */
+ lt_fatal (__FILE__, __LINE__,
+ "unrecognized %s option: '%s'",
+ ltwrapper_option_prefix, argv[i]);
+ }
+ /* otherwise ... */
+ newargz[++newargc] = xstrdup (argv[i]);
+ }
+ newargz[++newargc] = NULL;
+
+EOF
+ cat <<EOF
+ /* The GNU banner must be the first non-error debug message */
+ lt_debugprintf (__FILE__, __LINE__, "libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\n");
+EOF
+ cat <<"EOF"
+ lt_debugprintf (__FILE__, __LINE__, "(main) argv[0]: %s\n", argv[0]);
+ lt_debugprintf (__FILE__, __LINE__, "(main) program_name: %s\n", program_name);
+
+ tmp_pathspec = find_executable (argv[0]);
+ if (tmp_pathspec == NULL)
+ lt_fatal (__FILE__, __LINE__, "couldn't find %s", argv[0]);
+ lt_debugprintf (__FILE__, __LINE__,
+ "(main) found exe (before symlink chase) at: %s\n",
+ tmp_pathspec);
+
+ actual_cwrapper_path = chase_symlinks (tmp_pathspec);
+ lt_debugprintf (__FILE__, __LINE__,
+ "(main) found exe (after symlink chase) at: %s\n",
+ actual_cwrapper_path);
+ XFREE (tmp_pathspec);
+
+ actual_cwrapper_name = xstrdup (base_name (actual_cwrapper_path));
+ strendzap (actual_cwrapper_path, actual_cwrapper_name);
+
+ /* wrapper name transforms */
+ strendzap (actual_cwrapper_name, ".exe");
+ tmp_pathspec = lt_extend_str (actual_cwrapper_name, ".exe", 1);
+ XFREE (actual_cwrapper_name);
+ actual_cwrapper_name = tmp_pathspec;
+ tmp_pathspec = 0;
+
+ /* target_name transforms -- use actual target program name; might have lt- prefix */
+ target_name = xstrdup (base_name (TARGET_PROGRAM_NAME));
+ strendzap (target_name, ".exe");
+ tmp_pathspec = lt_extend_str (target_name, ".exe", 1);
+ XFREE (target_name);
+ target_name = tmp_pathspec;
+ tmp_pathspec = 0;
+
+ lt_debugprintf (__FILE__, __LINE__,
+ "(main) libtool target name: %s\n",
+ target_name);
+EOF
+
+ cat <<EOF
+ newargz[0] =
+ XMALLOC (char, (strlen (actual_cwrapper_path) +
+ strlen ("$objdir") + 1 + strlen (actual_cwrapper_name) + 1));
+ strcpy (newargz[0], actual_cwrapper_path);
+ strcat (newargz[0], "$objdir");
+ strcat (newargz[0], "/");
+EOF
+
+ cat <<"EOF"
+ /* stop here, and copy so we don't have to do this twice */
+ tmp_pathspec = xstrdup (newargz[0]);
+
+ /* do NOT want the lt- prefix here, so use actual_cwrapper_name */
+ strcat (newargz[0], actual_cwrapper_name);
+
+ /* DO want the lt- prefix here if it exists, so use target_name */
+ lt_argv_zero = lt_extend_str (tmp_pathspec, target_name, 1);
+ XFREE (tmp_pathspec);
+ tmp_pathspec = NULL;
+EOF
+
+ case $host_os in
+ mingw*)
+ cat <<"EOF"
+ {
+ char* p;
+ while ((p = strchr (newargz[0], '\\')) != NULL)
+ {
+ *p = '/';
+ }
+ while ((p = strchr (lt_argv_zero, '\\')) != NULL)
+ {
+ *p = '/';
+ }
+ }
+EOF
+ ;;
+ esac
+
+ cat <<"EOF"
+ XFREE (target_name);
+ XFREE (actual_cwrapper_path);
+ XFREE (actual_cwrapper_name);
+
+ lt_setenv ("BIN_SH", "xpg4"); /* for Tru64 */
+ lt_setenv ("DUALCASE", "1"); /* for MSK sh */
+ /* Update the DLL searchpath. EXE_PATH_VALUE ($dllsearchpath) must
+ be prepended before (that is, appear after) LIB_PATH_VALUE ($temp_rpath)
+ because on Windows, both *_VARNAMEs are PATH but uninstalled
+ libraries must come first. */
+ lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE);
+ lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE);
+
+ lt_debugprintf (__FILE__, __LINE__, "(main) lt_argv_zero: %s\n",
+ nonnull (lt_argv_zero));
+ for (i = 0; i < newargc; i++)
+ {
+ lt_debugprintf (__FILE__, __LINE__, "(main) newargz[%d]: %s\n",
+ i, nonnull (newargz[i]));
+ }
+
+EOF
+
+ case $host_os in
+ mingw*)
+ cat <<"EOF"
+ /* execv doesn't actually work on mingw as expected on unix */
+ newargz = prepare_spawn (newargz);
+ rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
+ if (rval == -1)
+ {
+ /* failed to start process */
+ lt_debugprintf (__FILE__, __LINE__,
+ "(main) failed to launch target \"%s\": %s\n",
+ lt_argv_zero, nonnull (strerror (errno)));
+ return 127;
+ }
+ return rval;
+EOF
+ ;;
+ *)
+ cat <<"EOF"
+ execv (lt_argv_zero, newargz);
+ return rval; /* =127, but avoids unused variable warning */
+EOF
+ ;;
+ esac
+
+ cat <<"EOF"
+}
+
+void *
+xmalloc (size_t num)
+{
+ void *p = (void *) malloc (num);
+ if (!p)
+ lt_fatal (__FILE__, __LINE__, "memory exhausted");
+
+ return p;
+}
+
+char *
+xstrdup (const char *string)
+{
+ return string ? strcpy ((char *) xmalloc (strlen (string) + 1),
+ string) : NULL;
+}
+
+const char *
+base_name (const char *name)
+{
+ const char *base;
+
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+ /* Skip over the disk name in MSDOS pathnames. */
+ if (isalpha ((unsigned char) name[0]) && name[1] == ':')
+ name += 2;
+#endif
+
+ for (base = name; *name; name++)
+ if (IS_DIR_SEPARATOR (*name))
+ base = name + 1;
+ return base;
+}
+
+int
+check_executable (const char *path)
+{
+ struct stat st;
+
+ lt_debugprintf (__FILE__, __LINE__, "(check_executable): %s\n",
+ nonempty (path));
+ if ((!path) || (!*path))
+ return 0;
+
+ if ((stat (path, &st) >= 0)
+ && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH)))
+ return 1;
+ else
+ return 0;
+}
+
+int
+make_executable (const char *path)
+{
+ int rval = 0;
+ struct stat st;
+
+ lt_debugprintf (__FILE__, __LINE__, "(make_executable): %s\n",
+ nonempty (path));
+ if ((!path) || (!*path))
+ return 0;
+
+ if (stat (path, &st) >= 0)
+ {
+ rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR);
+ }
+ return rval;
+}
+
+/* Searches for the full path of the wrapper. Returns
+ newly allocated full path name if found, NULL otherwise
+ Does not chase symlinks, even on platforms that support them.
+*/
+char *
+find_executable (const char *wrapper)
+{
+ int has_slash = 0;
+ const char *p;
+ const char *p_next;
+ /* static buffer for getcwd */
+ char tmp[LT_PATHMAX + 1];
+ int tmp_len;
+ char *concat_name;
+
+ lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n",
+ nonempty (wrapper));
+
+ if ((wrapper == NULL) || (*wrapper == '\0'))
+ return NULL;
+
+ /* Absolute path? */
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+ if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':')
+ {
+ concat_name = xstrdup (wrapper);
+ if (check_executable (concat_name))
+ return concat_name;
+ XFREE (concat_name);
+ }
+ else
+ {
+#endif
+ if (IS_DIR_SEPARATOR (wrapper[0]))
+ {
+ concat_name = xstrdup (wrapper);
+ if (check_executable (concat_name))
+ return concat_name;
+ XFREE (concat_name);
+ }
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+ }
+#endif
+
+ for (p = wrapper; *p; p++)
+ if (*p == '/')
+ {
+ has_slash = 1;
+ break;
+ }
+ if (!has_slash)
+ {
+ /* no slashes; search PATH */
+ const char *path = getenv ("PATH");
+ if (path != NULL)
+ {
+ for (p = path; *p; p = p_next)
+ {
+ const char *q;
+ size_t p_len;
+ for (q = p; *q; q++)
+ if (IS_PATH_SEPARATOR (*q))
+ break;
+ p_len = q - p;
+ p_next = (*q == '\0' ? q : q + 1);
+ if (p_len == 0)
+ {
+ /* empty path: current directory */
+ if (getcwd (tmp, LT_PATHMAX) == NULL)
+ lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
+ nonnull (strerror (errno)));
+ tmp_len = strlen (tmp);
+ concat_name =
+ XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
+ memcpy (concat_name, tmp, tmp_len);
+ concat_name[tmp_len] = '/';
+ strcpy (concat_name + tmp_len + 1, wrapper);
+ }
+ else
+ {
+ concat_name =
+ XMALLOC (char, p_len + 1 + strlen (wrapper) + 1);
+ memcpy (concat_name, p, p_len);
+ concat_name[p_len] = '/';
+ strcpy (concat_name + p_len + 1, wrapper);
+ }
+ if (check_executable (concat_name))
+ return concat_name;
+ XFREE (concat_name);
+ }
+ }
+ /* not found in PATH; assume curdir */
+ }
+ /* Relative path | not found in path: prepend cwd */
+ if (getcwd (tmp, LT_PATHMAX) == NULL)
+ lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
+ nonnull (strerror (errno)));
+ tmp_len = strlen (tmp);
+ concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
+ memcpy (concat_name, tmp, tmp_len);
+ concat_name[tmp_len] = '/';
+ strcpy (concat_name + tmp_len + 1, wrapper);
+
+ if (check_executable (concat_name))
+ return concat_name;
+ XFREE (concat_name);
+ return NULL;
+}
+
+char *
+chase_symlinks (const char *pathspec)
+{
+#ifndef S_ISLNK
+ return xstrdup (pathspec);
+#else
+ char buf[LT_PATHMAX];
+ struct stat s;
+ char *tmp_pathspec = xstrdup (pathspec);
+ char *p;
+ int has_symlinks = 0;
+ while (strlen (tmp_pathspec) && !has_symlinks)
+ {
+ lt_debugprintf (__FILE__, __LINE__,
+ "checking path component for symlinks: %s\n",
+ tmp_pathspec);
+ if (lstat (tmp_pathspec, &s) == 0)
+ {
+ if (S_ISLNK (s.st_mode) != 0)
+ {
+ has_symlinks = 1;
+ break;
+ }
+
+ /* search backwards for last DIR_SEPARATOR */
+ p = tmp_pathspec + strlen (tmp_pathspec) - 1;
+ while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
+ p--;
+ if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
+ {
+ /* no more DIR_SEPARATORS left */
+ break;
+ }
+ *p = '\0';
+ }
+ else
+ {
+ lt_fatal (__FILE__, __LINE__,
+ "error accessing file \"%s\": %s",
+ tmp_pathspec, nonnull (strerror (errno)));
+ }
+ }
+ XFREE (tmp_pathspec);
+
+ if (!has_symlinks)
+ {
+ return xstrdup (pathspec);
+ }
+
+ tmp_pathspec = realpath (pathspec, buf);
+ if (tmp_pathspec == 0)
+ {
+ lt_fatal (__FILE__, __LINE__,
+ "could not follow symlinks for %s", pathspec);
+ }
+ return xstrdup (tmp_pathspec);
+#endif
+}
+
+char *
+strendzap (char *str, const char *pat)
+{
+ size_t len, patlen;
+
+ assert (str != NULL);
+ assert (pat != NULL);
+
+ len = strlen (str);
+ patlen = strlen (pat);
+
+ if (patlen <= len)
+ {
+ str += len - patlen;
+ if (strcmp (str, pat) == 0)
+ *str = '\0';
+ }
+ return str;
+}
+
+void
+lt_debugprintf (const char *file, int line, const char *fmt, ...)
+{
+ va_list args;
+ if (lt_debug)
+ {
+ (void) fprintf (stderr, "%s:%s:%d: ", program_name, file, line);
+ va_start (args, fmt);
+ (void) vfprintf (stderr, fmt, args);
+ va_end (args);
+ }
+}
+
+static void
+lt_error_core (int exit_status, const char *file,
+ int line, const char *mode,
+ const char *message, va_list ap)
+{
+ fprintf (stderr, "%s:%s:%d: %s: ", program_name, file, line, mode);
+ vfprintf (stderr, message, ap);
+ fprintf (stderr, ".\n");
+
+ if (exit_status >= 0)
+ exit (exit_status);
+}
+
+void
+lt_fatal (const char *file, int line, const char *message, ...)
+{
+ va_list ap;
+ va_start (ap, message);
+ lt_error_core (EXIT_FAILURE, file, line, "FATAL", message, ap);
+ va_end (ap);
+}
+
+static const char *
+nonnull (const char *s)
+{
+ return s ? s : "(null)";
+}
+
+static const char *
+nonempty (const char *s)
+{
+ return (s && !*s) ? "(empty)" : nonnull (s);
+}
+
+void
+lt_setenv (const char *name, const char *value)
+{
+ lt_debugprintf (__FILE__, __LINE__,
+ "(lt_setenv) setting '%s' to '%s'\n",
+ nonnull (name), nonnull (value));
+ {
+#ifdef HAVE_SETENV
+ /* always make a copy, for consistency with !HAVE_SETENV */
+ char *str = xstrdup (value);
+ setenv (name, str, 1);
+#else
+ int len = strlen (name) + 1 + strlen (value) + 1;
+ char *str = XMALLOC (char, len);
+ sprintf (str, "%s=%s", name, value);
+ if (putenv (str) != EXIT_SUCCESS)
+ {
+ XFREE (str);
+ }
+#endif
+ }
+}
+
+char *
+lt_extend_str (const char *orig_value, const char *add, int to_end)
+{
+ char *new_value;
+ if (orig_value && *orig_value)
+ {
+ int orig_value_len = strlen (orig_value);
+ int add_len = strlen (add);
+ new_value = XMALLOC (char, add_len + orig_value_len + 1);
+ if (to_end)
+ {
+ strcpy (new_value, orig_value);
+ strcpy (new_value + orig_value_len, add);
+ }
+ else
+ {
+ strcpy (new_value, add);
+ strcpy (new_value + add_len, orig_value);
+ }
+ }
+ else
+ {
+ new_value = xstrdup (add);
+ }
+ return new_value;
+}
+
+void
+lt_update_exe_path (const char *name, const char *value)
+{
+ lt_debugprintf (__FILE__, __LINE__,
+ "(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
+ nonnull (name), nonnull (value));
+
+ if (name && *name && value && *value)
+ {
+ char *new_value = lt_extend_str (getenv (name), value, 0);
+ /* some systems can't cope with a ':'-terminated path #' */
+ int len = strlen (new_value);
+ while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1]))
+ {
+ new_value[len-1] = '\0';
+ }
+ lt_setenv (name, new_value);
+ XFREE (new_value);
+ }
+}
+
+void
+lt_update_lib_path (const char *name, const char *value)
+{
+ lt_debugprintf (__FILE__, __LINE__,
+ "(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
+ nonnull (name), nonnull (value));
+
+ if (name && *name && value && *value)
+ {
+ char *new_value = lt_extend_str (getenv (name), value, 0);
+ lt_setenv (name, new_value);
+ XFREE (new_value);
+ }
+}
+
+EOF
+ case $host_os in
+ mingw*)
+ cat <<"EOF"
+
+/* Prepares an argument vector before calling spawn().
+ Note that spawn() does not by itself call the command interpreter
+ (getenv ("COMSPEC") != NULL ? getenv ("COMSPEC") :
+ ({ OSVERSIONINFO v; v.dwOSVersionInfoSize = sizeof(OSVERSIONINFO);
+ GetVersionEx(&v);
+ v.dwPlatformId == VER_PLATFORM_WIN32_NT;
+ }) ? "cmd.exe" : "command.com").
+ Instead it simply concatenates the arguments, separated by ' ', and calls
+ CreateProcess(). We must quote the arguments since Win32 CreateProcess()
+ interprets characters like ' ', '\t', '\\', '"' (but not '<' and '>') in a
+ special way:
+ - Space and tab are interpreted as delimiters. They are not treated as
+ delimiters if they are surrounded by double quotes: "...".
+ - Unescaped double quotes are removed from the input. Their only effect is
+ that within double quotes, space and tab are treated like normal
+ characters.
+ - Backslashes not followed by double quotes are not special.
+ - But 2*n+1 backslashes followed by a double quote become
+ n backslashes followed by a double quote (n >= 0):
+ \" -> "
+ \\\" -> \"
+ \\\\\" -> \\"
+ */
+#define SHELL_SPECIAL_CHARS "\"\\ \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
+#define SHELL_SPACE_CHARS " \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
+char **
+prepare_spawn (char **argv)
+{
+ size_t argc;
+ char **new_argv;
+ size_t i;
+
+ /* Count number of arguments. */
+ for (argc = 0; argv[argc] != NULL; argc++)
+ ;
+
+ /* Allocate new argument vector. */
+ new_argv = XMALLOC (char *, argc + 1);
+
+ /* Put quoted arguments into the new argument vector. */
+ for (i = 0; i < argc; i++)
+ {
+ const char *string = argv[i];
+
+ if (string[0] == '\0')
+ new_argv[i] = xstrdup ("\"\"");
+ else if (strpbrk (string, SHELL_SPECIAL_CHARS) != NULL)
+ {
+ int quote_around = (strpbrk (string, SHELL_SPACE_CHARS) != NULL);
+ size_t length;
+ unsigned int backslashes;
+ const char *s;
+ char *quoted_string;
+ char *p;
+
+ length = 0;
+ backslashes = 0;
+ if (quote_around)
+ length++;
+ for (s = string; *s != '\0'; s++)
+ {
+ char c = *s;
+ if (c == '"')
+ length += backslashes + 1;
+ length++;
+ if (c == '\\')
+ backslashes++;
+ else
+ backslashes = 0;
+ }
+ if (quote_around)
+ length += backslashes + 1;
+
+ quoted_string = XMALLOC (char, length + 1);
+
+ p = quoted_string;
+ backslashes = 0;
+ if (quote_around)
+ *p++ = '"';
+ for (s = string; *s != '\0'; s++)
+ {
+ char c = *s;
+ if (c == '"')
+ {
+ unsigned int j;
+ for (j = backslashes + 1; j > 0; j--)
+ *p++ = '\\';
+ }
+ *p++ = c;
+ if (c == '\\')
+ backslashes++;
+ else
+ backslashes = 0;
+ }
+ if (quote_around)
+ {
+ unsigned int j;
+ for (j = backslashes; j > 0; j--)
+ *p++ = '\\';
+ *p++ = '"';
+ }
+ *p = '\0';
+
+ new_argv[i] = quoted_string;
+ }
+ else
+ new_argv[i] = (char *) string;
+ }
+ new_argv[argc] = NULL;
+
+ return new_argv;
+}
+EOF
+ ;;
+ esac
+
+ cat <<"EOF"
+void lt_dump_script (FILE* f)
+{
+EOF
+ func_emit_wrapper yes |
+ $SED -n -e '
+s/^\(.\{79\}\)\(..*\)/\1\
+\2/
+h
+s/\([\\"]\)/\\\1/g
+s/$/\\n/
+s/\([^\n]*\).*/ fputs ("\1", f);/p
+g
+D'
+ cat <<"EOF"
+}
+EOF
+}
+# end: func_emit_cwrapperexe_src
+
+# func_win32_import_lib_p ARG
+# True if ARG is an import lib, as indicated by $file_magic_cmd
+func_win32_import_lib_p ()
+{
+ $opt_debug
+ case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in
+ *import*) : ;;
+ *) false ;;
+ esac
+}
+
+# func_mode_link arg...
+func_mode_link ()
+{
+ $opt_debug
+ case $host in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
+ # It is impossible to link a dll without this setting, and
+ # we shouldn't force the makefile maintainer to figure out
+ # which system we are compiling for in order to pass an extra
+ # flag for every libtool invocation.
+ # allow_undefined=no
+
+ # FIXME: Unfortunately, there are problems with the above when trying
+ # to make a dll which has undefined symbols, in which case not
+ # even a static library is built. For now, we need to specify
+ # -no-undefined on the libtool link line when we can be certain
+ # that all symbols are satisfied, otherwise we get a static library.
+ allow_undefined=yes
+ ;;
+ *)
+ allow_undefined=yes
+ ;;
+ esac
+ libtool_args=$nonopt
+ base_compile="$nonopt $@"
+ compile_command=$nonopt
+ finalize_command=$nonopt
+
+ compile_rpath=
+ finalize_rpath=
+ compile_shlibpath=
+ finalize_shlibpath=
+ convenience=
+ old_convenience=
+ deplibs=
+ old_deplibs=
+ compiler_flags=
+ linker_flags=
+ dllsearchpath=
+ lib_search_path=`pwd`
+ inst_prefix_dir=
+ new_inherited_linker_flags=
+
+ avoid_version=no
+ bindir=
+ dlfiles=
+ dlprefiles=
+ dlself=no
+ export_dynamic=no
+ export_symbols=
+ export_symbols_regex=
+ generated=
+ libobjs=
+ ltlibs=
+ module=no
+ no_install=no
+ objs=
+ non_pic_objects=
+ precious_files_regex=
+ prefer_static_libs=no
+ preload=no
+ prev=
+ prevarg=
+ release=
+ rpath=
+ xrpath=
+ perm_rpath=
+ temp_rpath=
+ thread_safe=no
+ vinfo=
+ vinfo_number=no
+ weak_libs=
+ single_module="${wl}-single_module"
+ func_infer_tag $base_compile
+
+ # We need to know -static, to get the right output filenames.
+ for arg
+ do
+ case $arg in
+ -shared)
+ test "$build_libtool_libs" != yes && \
+ func_fatal_configuration "can not build a shared library"
+ build_old_libs=no
+ break
+ ;;
+ -all-static | -static | -static-libtool-libs)
+ case $arg in
+ -all-static)
+ if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
+ func_warning "complete static linking is impossible in this configuration"
+ fi
+ if test -n "$link_static_flag"; then
+ dlopen_self=$dlopen_self_static
+ fi
+ prefer_static_libs=yes
+ ;;
+ -static)
+ if test -z "$pic_flag" && test -n "$link_static_flag"; then
+ dlopen_self=$dlopen_self_static
+ fi
+ prefer_static_libs=built
+ ;;
+ -static-libtool-libs)
+ if test -z "$pic_flag" && test -n "$link_static_flag"; then
+ dlopen_self=$dlopen_self_static
+ fi
+ prefer_static_libs=yes
+ ;;
+ esac
+ build_libtool_libs=no
+ build_old_libs=yes
+ break
+ ;;
+ esac
+ done
+
+ # See if our shared archives depend on static archives.
+ test -n "$old_archive_from_new_cmds" && build_old_libs=yes
+
+ # Go through the arguments, transforming them on the way.
+ while test "$#" -gt 0; do
+ arg="$1"
+ shift
+ func_quote_for_eval "$arg"
+ qarg=$func_quote_for_eval_unquoted_result
+ func_append libtool_args " $func_quote_for_eval_result"
+
+ # If the previous option needs an argument, assign it.
+ if test -n "$prev"; then
+ case $prev in
+ output)
+ func_append compile_command " @OUTPUT@"
+ func_append finalize_command " @OUTPUT@"
+ ;;
+ esac
+
+ case $prev in
+ bindir)
+ bindir="$arg"
+ prev=
+ continue
+ ;;
+ dlfiles|dlprefiles)
+ if test "$preload" = no; then
+ # Add the symbol object into the linking commands.
+ func_append compile_command " @SYMFILE@"
+ func_append finalize_command " @SYMFILE@"
+ preload=yes
+ fi
+ case $arg in
+ *.la | *.lo) ;; # We handle these cases below.
+ force)
+ if test "$dlself" = no; then
+ dlself=needless
+ export_dynamic=yes
+ fi
+ prev=
+ continue
+ ;;
+ self)
+ if test "$prev" = dlprefiles; then
+ dlself=yes
+ elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
+ dlself=yes
+ else
+ dlself=needless
+ export_dynamic=yes
+ fi
+ prev=
+ continue
+ ;;
+ *)
+ if test "$prev" = dlfiles; then
+ func_append dlfiles " $arg"
+ else
+ func_append dlprefiles " $arg"
+ fi
+ prev=
+ continue
+ ;;
+ esac
+ ;;
+ expsyms)
+ export_symbols="$arg"
+ test -f "$arg" \
+ || func_fatal_error "symbol file \`$arg' does not exist"
+ prev=
+ continue
+ ;;
+ expsyms_regex)
+ export_symbols_regex="$arg"
+ prev=
+ continue
+ ;;
+ framework)
+ case $host in
+ *-*-darwin*)
+ case "$deplibs " in
+ *" $qarg.ltframework "*) ;;
+ *) func_append deplibs " $qarg.ltframework" # this is fixed later
+ ;;
+ esac
+ ;;
+ esac
+ prev=
+ continue
+ ;;
+ inst_prefix)
+ inst_prefix_dir="$arg"
+ prev=
+ continue
+ ;;
+ objectlist)
+ if test -f "$arg"; then
+ save_arg=$arg
+ moreargs=
+ for fil in `cat "$save_arg"`
+ do
+# func_append moreargs " $fil"
+ arg=$fil
+ # A libtool-controlled object.
+
+ # Check to see that this really is a libtool object.
+ if func_lalib_unsafe_p "$arg"; then
+ pic_object=
+ non_pic_object=
+
+ # Read the .lo file
+ func_source "$arg"
+
+ if test -z "$pic_object" ||
+ test -z "$non_pic_object" ||
+ test "$pic_object" = none &&
+ test "$non_pic_object" = none; then
+ func_fatal_error "cannot find name of object for \`$arg'"
+ fi
+
+ # Extract subdirectory from the argument.
+ func_dirname "$arg" "/" ""
+ xdir="$func_dirname_result"
+
+ if test "$pic_object" != none; then
+ # Prepend the subdirectory the object is found in.
+ pic_object="$xdir$pic_object"
+
+ if test "$prev" = dlfiles; then
+ if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+ func_append dlfiles " $pic_object"
+ prev=
+ continue
+ else
+ # If libtool objects are unsupported, then we need to preload.
+ prev=dlprefiles
+ fi
+ fi
+
+ # CHECK ME: I think I busted this. -Ossama
+ if test "$prev" = dlprefiles; then
+ # Preload the old-style object.
+ func_append dlprefiles " $pic_object"
+ prev=
+ fi
+
+ # A PIC object.
+ func_append libobjs " $pic_object"
+ arg="$pic_object"
+ fi
+
+ # Non-PIC object.
+ if test "$non_pic_object" != none; then
+ # Prepend the subdirectory the object is found in.
+ non_pic_object="$xdir$non_pic_object"
+
+ # A standard non-PIC object
+ func_append non_pic_objects " $non_pic_object"
+ if test -z "$pic_object" || test "$pic_object" = none ; then
+ arg="$non_pic_object"
+ fi
+ else
+ # If the PIC object exists, use it instead.
+ # $xdir was prepended to $pic_object above.
+ non_pic_object="$pic_object"
+ func_append non_pic_objects " $non_pic_object"
+ fi
+ else
+ # Only an error if not doing a dry-run.
+ if $opt_dry_run; then
+ # Extract subdirectory from the argument.
+ func_dirname "$arg" "/" ""
+ xdir="$func_dirname_result"
+
+ func_lo2o "$arg"
+ pic_object=$xdir$objdir/$func_lo2o_result
+ non_pic_object=$xdir$func_lo2o_result
+ func_append libobjs " $pic_object"
+ func_append non_pic_objects " $non_pic_object"
+ else
+ func_fatal_error "\`$arg' is not a valid libtool object"
+ fi
+ fi
+ done
+ else
+ func_fatal_error "link input file \`$arg' does not exist"
+ fi
+ arg=$save_arg
+ prev=
+ continue
+ ;;
+ precious_regex)
+ precious_files_regex="$arg"
+ prev=
+ continue
+ ;;
+ release)
+ release="-$arg"
+ prev=
+ continue
+ ;;
+ rpath | xrpath)
+ # We need an absolute path.
+ case $arg in
+ [\\/]* | [A-Za-z]:[\\/]*) ;;
+ *)
+ func_fatal_error "only absolute run-paths are allowed"
+ ;;
+ esac
+ if test "$prev" = rpath; then
+ case "$rpath " in
+ *" $arg "*) ;;
+ *) func_append rpath " $arg" ;;
+ esac
+ else
+ case "$xrpath " in
+ *" $arg "*) ;;
+ *) func_append xrpath " $arg" ;;
+ esac
+ fi
+ prev=
+ continue
+ ;;
+ shrext)
+ shrext_cmds="$arg"
+ prev=
+ continue
+ ;;
+ weak)
+ func_append weak_libs " $arg"
+ prev=
+ continue
+ ;;
+ xcclinker)
+ func_append linker_flags " $qarg"
+ func_append compiler_flags " $qarg"
+ prev=
+ func_append compile_command " $qarg"
+ func_append finalize_command " $qarg"
+ continue
+ ;;
+ xcompiler)
+ func_append compiler_flags " $qarg"
+ prev=
+ func_append compile_command " $qarg"
+ func_append finalize_command " $qarg"
+ continue
+ ;;
+ xlinker)
+ func_append linker_flags " $qarg"
+ func_append compiler_flags " $wl$qarg"
+ prev=
+ func_append compile_command " $wl$qarg"
+ func_append finalize_command " $wl$qarg"
+ continue
+ ;;
+ *)
+ eval "$prev=\"\$arg\""
+ prev=
+ continue
+ ;;
+ esac
+ fi # test -n "$prev"
+
+ prevarg="$arg"
+
+ case $arg in
+ -all-static)
+ if test -n "$link_static_flag"; then
+ # See comment for -static flag below, for more details.
+ func_append compile_command " $link_static_flag"
+ func_append finalize_command " $link_static_flag"
+ fi
+ continue
+ ;;
+
+ -allow-undefined)
+ # FIXME: remove this flag sometime in the future.
+ func_fatal_error "\`-allow-undefined' must not be used because it is the default"
+ ;;
+
+ -avoid-version)
+ avoid_version=yes
+ continue
+ ;;
+
+ -bindir)
+ prev=bindir
+ continue
+ ;;
+
+ -dlopen)
+ prev=dlfiles
+ continue
+ ;;
+
+ -dlpreopen)
+ prev=dlprefiles
+ continue
+ ;;
+
+ -export-dynamic)
+ export_dynamic=yes
+ continue
+ ;;
+
+ -export-symbols | -export-symbols-regex)
+ if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
+ func_fatal_error "more than one -exported-symbols argument is not allowed"
+ fi
+ if test "X$arg" = "X-export-symbols"; then
+ prev=expsyms
+ else
+ prev=expsyms_regex
+ fi
+ continue
+ ;;
+
+ -framework)
+ prev=framework
+ continue
+ ;;
+
+ -inst-prefix-dir)
+ prev=inst_prefix
+ continue
+ ;;
+
+ # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
+ # so, if we see these flags be careful not to treat them like -L
+ -L[A-Z][A-Z]*:*)
+ case $with_gcc/$host in
+ no/*-*-irix* | /*-*-irix*)
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
+ ;;
+ esac
+ continue
+ ;;
+
+ -L*)
+ func_stripname "-L" '' "$arg"
+ if test -z "$func_stripname_result"; then
+ if test "$#" -gt 0; then
+ func_fatal_error "require no space between \`-L' and \`$1'"
+ else
+ func_fatal_error "need path for \`-L' option"
+ fi
+ fi
+ func_resolve_sysroot "$func_stripname_result"
+ dir=$func_resolve_sysroot_result
+ # We need an absolute path.
+ case $dir in
+ [\\/]* | [A-Za-z]:[\\/]*) ;;
+ *)
+ absdir=`cd "$dir" && pwd`
+ test -z "$absdir" && \
+ func_fatal_error "cannot determine absolute directory name of \`$dir'"
+ dir="$absdir"
+ ;;
+ esac
+ case "$deplibs " in
+ *" -L$dir "* | *" $arg "*)
+ # Will only happen for absolute or sysroot arguments
+ ;;
+ *)
+ # Preserve sysroot, but never include relative directories
+ case $dir in
+ [\\/]* | [A-Za-z]:[\\/]* | =*) func_append deplibs " $arg" ;;
+ *) func_append deplibs " -L$dir" ;;
+ esac
+ func_append lib_search_path " $dir"
+ ;;
+ esac
+ case $host in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
+ testbindir=`$ECHO "$dir" | $SED 's*/lib$*/bin*'`
+ case :$dllsearchpath: in
+ *":$dir:"*) ;;
+ ::) dllsearchpath=$dir;;
+ *) func_append dllsearchpath ":$dir";;
+ esac
+ case :$dllsearchpath: in
+ *":$testbindir:"*) ;;
+ ::) dllsearchpath=$testbindir;;
+ *) func_append dllsearchpath ":$testbindir";;
+ esac
+ ;;
+ esac
+ deplibs="$deplibs $arg"
+ continue
+ ;;
+
+ -l*)
+ if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
+ case $host in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*)
+ # These systems don't actually have a C or math library (as such)
+ continue
+ ;;
+ *-*-os2*)
+ # These systems don't actually have a C library (as such)
+ test "X$arg" = "X-lc" && continue
+ ;;
+ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+ # Do not include libc due to us having libc/libc_r.
+ test "X$arg" = "X-lc" && continue
+ ;;
+ *-*-rhapsody* | *-*-darwin1.[012])
+ # Rhapsody C and math libraries are in the System framework
+ func_append deplibs " System.ltframework"
+ continue
+ ;;
+ *-*-sco3.2v5* | *-*-sco5v6*)
+ # Causes problems with __ctype
+ test "X$arg" = "X-lc" && continue
+ ;;
+ *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
+ # Compiler inserts libc in the correct place for threads to work
+ test "X$arg" = "X-lc" && continue
+ ;;
+ esac
+ elif test "X$arg" = "X-lc_r"; then
+ case $host in
+ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+ # Do not include libc_r directly, use -pthread flag.
+ continue
+ ;;
+ esac
+ fi
+ func_append deplibs " $arg"
+ continue
+ ;;
+
+ -module)
+ module=yes
+ continue
+ ;;
+
+ # Tru64 UNIX uses -model [arg] to determine the layout of C++
+ # classes, name mangling, and exception handling.
+ # Darwin uses the -arch flag to determine output architecture.
+ -model|-arch|-isysroot|--sysroot)
+ func_append compiler_flags " $arg"
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
+ prev=xcompiler
+ continue
+ ;;
+
+ -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \
+ |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*)
+ func_append compiler_flags " $arg"
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
+ case "$new_inherited_linker_flags " in
+ *" $arg "*) ;;
+ * ) func_append new_inherited_linker_flags " $arg" ;;
+ esac
+ continue
+ ;;
+
+ -multi_module)
+ single_module="${wl}-multi_module"
+ continue
+ ;;
+
+ -no-fast-install)
+ fast_install=no
+ continue
+ ;;
+
+ -no-install)
+ case $host in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*)
+ # The PATH hackery in wrapper scripts is required on Windows
+ # and Darwin in order for the loader to find any dlls it needs.
+ func_warning "\`-no-install' is ignored for $host"
+ func_warning "assuming \`-no-fast-install' instead"
+ fast_install=no
+ ;;
+ *) no_install=yes ;;
+ esac
+ continue
+ ;;
+
+ -no-undefined)
+ allow_undefined=no
+ continue
+ ;;
+
+ -objectlist)
+ prev=objectlist
+ continue
+ ;;
+
+ -o) prev=output ;;
+
+ -precious-files-regex)
+ prev=precious_regex
+ continue
+ ;;
+
+ -release)
+ prev=release
+ continue
+ ;;
+
+ -rpath)
+ prev=rpath
+ continue
+ ;;
+
+ -R)
+ prev=xrpath
+ continue
+ ;;
+
+ -R*)
+ func_stripname '-R' '' "$arg"
+ dir=$func_stripname_result
+ # We need an absolute path.
+ case $dir in
+ [\\/]* | [A-Za-z]:[\\/]*) ;;
+ =*)
+ func_stripname '=' '' "$dir"
+ dir=$lt_sysroot$func_stripname_result
+ ;;
+ *)
+ func_fatal_error "only absolute run-paths are allowed"
+ ;;
+ esac
+ case "$xrpath " in
+ *" $dir "*) ;;
+ *) func_append xrpath " $dir" ;;
+ esac
+ continue
+ ;;
+
+ -shared)
+ # The effects of -shared are defined in a previous loop.
+ continue
+ ;;
+
+ -shrext)
+ prev=shrext
+ continue
+ ;;
+
+ -static | -static-libtool-libs)
+ # The effects of -static are defined in a previous loop.
+ # We used to do the same as -all-static on platforms that
+ # didn't have a PIC flag, but the assumption that the effects
+ # would be equivalent was wrong. It would break on at least
+ # Digital Unix and AIX.
+ continue
+ ;;
+
+ -thread-safe)
+ thread_safe=yes
+ continue
+ ;;
+
+ -version-info)
+ prev=vinfo
+ continue
+ ;;
+
+ -version-number)
+ prev=vinfo
+ vinfo_number=yes
+ continue
+ ;;
+
+ -weak)
+ prev=weak
+ continue
+ ;;
+
+ -Wc,*)
+ func_stripname '-Wc,' '' "$arg"
+ args=$func_stripname_result
+ arg=
+ save_ifs="$IFS"; IFS=','
+ for flag in $args; do
+ IFS="$save_ifs"
+ func_quote_for_eval "$flag"
+ func_append arg " $func_quote_for_eval_result"
+ func_append compiler_flags " $func_quote_for_eval_result"
+ done
+ IFS="$save_ifs"
+ func_stripname ' ' '' "$arg"
+ arg=$func_stripname_result
+ ;;
+
+ -Wl,*)
+ func_stripname '-Wl,' '' "$arg"
+ args=$func_stripname_result
+ arg=
+ save_ifs="$IFS"; IFS=','
+ for flag in $args; do
+ IFS="$save_ifs"
+ func_quote_for_eval "$flag"
+ func_append arg " $wl$func_quote_for_eval_result"
+ func_append compiler_flags " $wl$func_quote_for_eval_result"
+ func_append linker_flags " $func_quote_for_eval_result"
+ done
+ IFS="$save_ifs"
+ func_stripname ' ' '' "$arg"
+ arg=$func_stripname_result
+ ;;
+
+ -Xcompiler)
+ prev=xcompiler
+ continue
+ ;;
+
+ -Xlinker)
+ prev=xlinker
+ continue
+ ;;
+
+ -XCClinker)
+ prev=xcclinker
+ continue
+ ;;
+
+ # -msg_* for osf cc
+ -msg_*)
+ func_quote_for_eval "$arg"
+ arg="$func_quote_for_eval_result"
+ ;;
+
+ # Flags to be passed through unchanged, with rationale:
+ # -64, -mips[0-9] enable 64-bit mode for the SGI compiler
+ # -r[0-9][0-9]* specify processor for the SGI compiler
+ # -xarch=*, -xtarget=* enable 64-bit mode for the Sun compiler
+ # +DA*, +DD* enable 64-bit mode for the HP compiler
+ # -q* compiler args for the IBM compiler
+ # -m*, -t[45]*, -txscale* architecture-specific flags for GCC
+ # -F/path path to uninstalled frameworks, gcc on darwin
+ # -p, -pg, --coverage, -fprofile-* profiling flags for GCC
+ # @file GCC response files
+ # -tp=* Portland pgcc target processor selection
+ # --sysroot=* for sysroot support
+ # -O*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization
+ -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
+ -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \
+ -O*|-flto*|-fwhopr*|-fuse-linker-plugin)
+ func_quote_for_eval "$arg"
+ arg="$func_quote_for_eval_result"
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
+ func_append compiler_flags " $arg"
+ continue
+ ;;
+
+ # Some other compiler flag.
+ -* | +*)
+ func_quote_for_eval "$arg"
+ arg="$func_quote_for_eval_result"
+ ;;
+
+ *.$objext)
+ # A standard object.
+ func_append objs " $arg"
+ ;;
+
+ *.lo)
+ # A libtool-controlled object.
+
+ # Check to see that this really is a libtool object.
+ if func_lalib_unsafe_p "$arg"; then
+ pic_object=
+ non_pic_object=
+
+ # Read the .lo file
+ func_source "$arg"
+
+ if test -z "$pic_object" ||
+ test -z "$non_pic_object" ||
+ test "$pic_object" = none &&
+ test "$non_pic_object" = none; then
+ func_fatal_error "cannot find name of object for \`$arg'"
+ fi
+
+ # Extract subdirectory from the argument.
+ func_dirname "$arg" "/" ""
+ xdir="$func_dirname_result"
+
+ if test "$pic_object" != none; then
+ # Prepend the subdirectory the object is found in.
+ pic_object="$xdir$pic_object"
+
+ if test "$prev" = dlfiles; then
+ if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+ func_append dlfiles " $pic_object"
+ prev=
+ continue
+ else
+ # If libtool objects are unsupported, then we need to preload.
+ prev=dlprefiles
+ fi
+ fi
+
+ # CHECK ME: I think I busted this. -Ossama
+ if test "$prev" = dlprefiles; then
+ # Preload the old-style object.
+ func_append dlprefiles " $pic_object"
+ prev=
+ fi
+
+ # A PIC object.
+ func_append libobjs " $pic_object"
+ arg="$pic_object"
+ fi
+
+ # Non-PIC object.
+ if test "$non_pic_object" != none; then
+ # Prepend the subdirectory the object is found in.
+ non_pic_object="$xdir$non_pic_object"
+
+ # A standard non-PIC object
+ func_append non_pic_objects " $non_pic_object"
+ if test -z "$pic_object" || test "$pic_object" = none ; then
+ arg="$non_pic_object"
+ fi
+ else
+ # If the PIC object exists, use it instead.
+ # $xdir was prepended to $pic_object above.
+ non_pic_object="$pic_object"
+ func_append non_pic_objects " $non_pic_object"
+ fi
+ else
+ # Only an error if not doing a dry-run.
+ if $opt_dry_run; then
+ # Extract subdirectory from the argument.
+ func_dirname "$arg" "/" ""
+ xdir="$func_dirname_result"
+
+ func_lo2o "$arg"
+ pic_object=$xdir$objdir/$func_lo2o_result
+ non_pic_object=$xdir$func_lo2o_result
+ func_append libobjs " $pic_object"
+ func_append non_pic_objects " $non_pic_object"
+ else
+ func_fatal_error "\`$arg' is not a valid libtool object"
+ fi
+ fi
+ ;;
+
+ *.$libext)
+ # An archive.
+ func_append deplibs " $arg"
+ func_append old_deplibs " $arg"
+ continue
+ ;;
+
+ *.la)
+ # A libtool-controlled library.
+
+ func_resolve_sysroot "$arg"
+ if test "$prev" = dlfiles; then
+ # This library was specified with -dlopen.
+ func_append dlfiles " $func_resolve_sysroot_result"
+ prev=
+ elif test "$prev" = dlprefiles; then
+ # The library was specified with -dlpreopen.
+ func_append dlprefiles " $func_resolve_sysroot_result"
+ prev=
+ else
+ func_append deplibs " $func_resolve_sysroot_result"
+ fi
+ continue
+ ;;
+
+ # Some other compiler argument.
+ *)
+ # Unknown arguments in both finalize_command and compile_command need
+ # to be aesthetically quoted because they are evaled later.
+ func_quote_for_eval "$arg"
+ arg="$func_quote_for_eval_result"
+ ;;
+ esac # arg
+
+ # Now actually substitute the argument into the commands.
+ if test -n "$arg"; then
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
+ fi
+ done # argument parsing loop
+
+ test -n "$prev" && \
+ func_fatal_help "the \`$prevarg' option requires an argument"
+
+ if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
+ eval arg=\"$export_dynamic_flag_spec\"
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
+ fi
+
+ oldlibs=
+ # calculate the name of the file, without its directory
+ func_basename "$output"
+ outputname="$func_basename_result"
+ libobjs_save="$libobjs"
+
+ if test -n "$shlibpath_var"; then
+ # get the directories listed in $shlibpath_var
+ eval shlib_search_path=\`\$ECHO \"\${$shlibpath_var}\" \| \$SED \'s/:/ /g\'\`
+ else
+ shlib_search_path=
+ fi
+ eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
+ eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
+
+ func_dirname "$output" "/" ""
+ output_objdir="$func_dirname_result$objdir"
+ func_to_tool_file "$output_objdir/"
+ tool_output_objdir=$func_to_tool_file_result
+ # Create the object directory.
+ func_mkdir_p "$output_objdir"
+
+ # Determine the type of output
+ case $output in
+ "")
+ func_fatal_help "you must specify an output file"
+ ;;
+ *.$libext) linkmode=oldlib ;;
+ *.lo | *.$objext) linkmode=obj ;;
+ *.la) linkmode=lib ;;
+ *) linkmode=prog ;; # Anything else should be a program.
+ esac
+
+ specialdeplibs=
+
+ libs=
+ # Find all interdependent deplibs by searching for libraries
+ # that are linked more than once (e.g. -la -lb -la)
+ for deplib in $deplibs; do
+ if $opt_preserve_dup_deps ; then
+ case "$libs " in
+ *" $deplib "*) func_append specialdeplibs " $deplib" ;;
+ esac
+ fi
+ func_append libs " $deplib"
+ done
+
+ if test "$linkmode" = lib; then
+ libs="$predeps $libs $compiler_lib_search_path $postdeps"
+
+ # Compute libraries that are listed more than once in $predeps
+ # $postdeps and mark them as special (i.e., whose duplicates are
+ # not to be eliminated).
+ pre_post_deps=
+ if $opt_duplicate_compiler_generated_deps; then
+ for pre_post_dep in $predeps $postdeps; do
+ case "$pre_post_deps " in
+ *" $pre_post_dep "*) func_append specialdeplibs " $pre_post_deps" ;;
+ esac
+ func_append pre_post_deps " $pre_post_dep"
+ done
+ fi
+ pre_post_deps=
+ fi
+
+ deplibs=
+ newdependency_libs=
+ newlib_search_path=
+ need_relink=no # whether we're linking any uninstalled libtool libraries
+ notinst_deplibs= # not-installed libtool libraries
+ notinst_path= # paths that contain not-installed libtool libraries
+
+ case $linkmode in
+ lib)
+ passes="conv dlpreopen link"
+ for file in $dlfiles $dlprefiles; do
+ case $file in
+ *.la) ;;
+ *)
+ func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file"
+ ;;
+ esac
+ done
+ ;;
+ prog)
+ compile_deplibs=
+ finalize_deplibs=
+ alldeplibs=no
+ newdlfiles=
+ newdlprefiles=
+ passes="conv scan dlopen dlpreopen link"
+ ;;
+ *) passes="conv"
+ ;;
+ esac
+
+ for pass in $passes; do
+ # The preopen pass in lib mode reverses $deplibs; put it back here
+ # so that -L comes before libs that need it for instance...
+ if test "$linkmode,$pass" = "lib,link"; then
+ ## FIXME: Find the place where the list is rebuilt in the wrong
+ ## order, and fix it there properly
+ tmp_deplibs=
+ for deplib in $deplibs; do
+ tmp_deplibs="$deplib $tmp_deplibs"
+ done
+ deplibs="$tmp_deplibs"
+ fi
+
+ if test "$linkmode,$pass" = "lib,link" ||
+ test "$linkmode,$pass" = "prog,scan"; then
+ libs="$deplibs"
+ deplibs=
+ fi
+ if test "$linkmode" = prog; then
+ case $pass in
+ dlopen) libs="$dlfiles" ;;
+ dlpreopen) libs="$dlprefiles" ;;
+ link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
+ esac
+ fi
+ if test "$linkmode,$pass" = "lib,dlpreopen"; then
+ # Collect and forward deplibs of preopened libtool libs
+ for lib in $dlprefiles; do
+ # Ignore non-libtool-libs
+ dependency_libs=
+ func_resolve_sysroot "$lib"
+ case $lib in
+ *.la) func_source "$func_resolve_sysroot_result" ;;
+ esac
+
+ # Collect preopened libtool deplibs, except any this library
+ # has declared as weak libs
+ for deplib in $dependency_libs; do
+ func_basename "$deplib"
+ deplib_base=$func_basename_result
+ case " $weak_libs " in
+ *" $deplib_base "*) ;;
+ *) func_append deplibs " $deplib" ;;
+ esac
+ done
+ done
+ libs="$dlprefiles"
+ fi
+ if test "$pass" = dlopen; then
+ # Collect dlpreopened libraries
+ save_deplibs="$deplibs"
+ deplibs=
+ fi
+
+ for deplib in $libs; do
+ lib=
+ found=no
+ case $deplib in
+ -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \
+ |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*)
+ if test "$linkmode,$pass" = "prog,link"; then
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ else
+ func_append compiler_flags " $deplib"
+ fi
+
+ case $linkmode in
+ lib)
+ deplibs="$deplib $deplibs"
+ test "$pass" = conv && continue
+ newdependency_libs="$deplib $newdependency_libs"
+ ;;
+ prog)
+ if test "$pass" = conv; then
+ deplibs="$deplib $deplibs"
+ continue
+ fi
+ if test "$pass" = scan; then
+ deplibs="$deplib $deplibs"
+ else
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ fi
+ ;;
+ *)
+ ;;
+ esac # linkmode
+
+ continue
+ ;;
+ -l*)
+ if test "$linkmode" != lib && test "$linkmode" != prog; then
+ func_warning "\`-l' is ignored for archives/objects"
+ continue
+ fi
+ func_stripname '-l' '' "$deplib"
+ name=$func_stripname_result
+ if test "$linkmode" = lib; then
+ searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path"
+ else
+ searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path"
+ fi
+ for searchdir in $searchdirs; do
+ for search_ext in .la $std_shrext .so .a; do
+ # Search the libtool library
+ lib="$searchdir/lib${name}${search_ext}"
+ if test -f "$lib"; then
+ if test "$search_ext" = ".la"; then
+ found=yes
+ else
+ found=no
+ fi
+ break 2
+ fi
+ done
+ done
+ if test "$found" != yes; then
+ # deplib doesn't seem to be a libtool library
+ if test "$linkmode,$pass" = "prog,link"; then
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ else
+ deplibs="$deplib $deplibs"
+ test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
+ fi
+ continue
+ else # deplib is a libtool library
+ # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
+ # We need to do some special things here, and not later.
+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ case " $predeps $postdeps " in
+ *" $deplib "*)
+ if func_lalib_p "$lib"; then
+ library_names=
+ old_library=
+ func_source "$lib"
+ for l in $old_library $library_names; do
+ ll="$l"
+ done
+ if test "X$ll" = "X$old_library" ; then # only static version available
+ found=no
+ func_dirname "$lib" "" "."
+ ladir="$func_dirname_result"
+ lib=$ladir/$old_library
+ if test "$linkmode,$pass" = "prog,link"; then
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ else
+ deplibs="$deplib $deplibs"
+ test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
+ fi
+ continue
+ fi
+ fi
+ ;;
+ *) ;;
+ esac
+ fi
+ fi
+ ;; # -l
+ *.ltframework)
+ if test "$linkmode,$pass" = "prog,link"; then
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ else
+ deplibs="$deplib $deplibs"
+ if test "$linkmode" = lib ; then
+ case "$new_inherited_linker_flags " in
+ *" $deplib "*) ;;
+ * ) func_append new_inherited_linker_flags " $deplib" ;;
+ esac
+ fi
+ fi
+ continue
+ ;;
+ -L*)
+ case $linkmode in
+ lib)
+ deplibs="$deplib $deplibs"
+ test "$pass" = conv && continue
+ newdependency_libs="$deplib $newdependency_libs"
+ func_stripname '-L' '' "$deplib"
+ func_resolve_sysroot "$func_stripname_result"
+ func_append newlib_search_path " $func_resolve_sysroot_result"
+ ;;
+ prog)
+ if test "$pass" = conv; then
+ deplibs="$deplib $deplibs"
+ continue
+ fi
+ if test "$pass" = scan; then
+ deplibs="$deplib $deplibs"
+ else
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ fi
+ func_stripname '-L' '' "$deplib"
+ func_resolve_sysroot "$func_stripname_result"
+ func_append newlib_search_path " $func_resolve_sysroot_result"
+ ;;
+ *)
+ func_warning "\`-L' is ignored for archives/objects"
+ ;;
+ esac # linkmode
+ continue
+ ;; # -L
+ -R*)
+ if test "$pass" = link; then
+ func_stripname '-R' '' "$deplib"
+ func_resolve_sysroot "$func_stripname_result"
+ dir=$func_resolve_sysroot_result
+ # Make sure the xrpath contains only unique directories.
+ case "$xrpath " in
+ *" $dir "*) ;;
+ *) func_append xrpath " $dir" ;;
+ esac
+ fi
+ deplibs="$deplib $deplibs"
+ continue
+ ;;
+ *.la)
+ func_resolve_sysroot "$deplib"
+ lib=$func_resolve_sysroot_result
+ ;;
+ *.$libext)
+ if test "$pass" = conv; then
+ deplibs="$deplib $deplibs"
+ continue
+ fi
+ case $linkmode in
+ lib)
+ # Linking convenience modules into shared libraries is allowed,
+ # but linking other static libraries is non-portable.
+ case " $dlpreconveniencelibs " in
+ *" $deplib "*) ;;
+ *)
+ valid_a_lib=no
+ case $deplibs_check_method in
+ match_pattern*)
+ set dummy $deplibs_check_method; shift
+ match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
+ if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \
+ | $EGREP "$match_pattern_regex" > /dev/null; then
+ valid_a_lib=yes
+ fi
+ ;;
+ pass_all)
+ valid_a_lib=yes
+ ;;
+ esac
+ if test "$valid_a_lib" != yes; then
+ echo
+ $ECHO "*** Warning: Trying to link with static lib archive $deplib."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which you do not appear to have"
+ echo "*** because the file extensions .$libext of this argument makes me believe"
+ echo "*** that it is just a static archive that I should not use here."
+ else
+ echo
+ $ECHO "*** Warning: Linking the shared library $output against the"
+ $ECHO "*** static library $deplib is not portable!"
+ deplibs="$deplib $deplibs"
+ fi
+ ;;
+ esac
+ continue
+ ;;
+ prog)
+ if test "$pass" != link; then
+ deplibs="$deplib $deplibs"
+ else
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ fi
+ continue
+ ;;
+ esac # linkmode
+ ;; # *.$libext
+ *.lo | *.$objext)
+ if test "$pass" = conv; then
+ deplibs="$deplib $deplibs"
+ elif test "$linkmode" = prog; then
+ if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
+ # If there is no dlopen support or we're linking statically,
+ # we need to preload.
+ func_append newdlprefiles " $deplib"
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ else
+ func_append newdlfiles " $deplib"
+ fi
+ fi
+ continue
+ ;;
+ %DEPLIBS%)
+ alldeplibs=yes
+ continue
+ ;;
+ esac # case $deplib
+
+ if test "$found" = yes || test -f "$lib"; then :
+ else
+ func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'"
+ fi
+
+ # Check to see that this really is a libtool archive.
+ func_lalib_unsafe_p "$lib" \
+ || func_fatal_error "\`$lib' is not a valid libtool archive"
+
+ func_dirname "$lib" "" "."
+ ladir="$func_dirname_result"
+
+ dlname=
+ dlopen=
+ dlpreopen=
+ libdir=
+ library_names=
+ old_library=
+ inherited_linker_flags=
+ # If the library was installed with an old release of libtool,
+ # it will not redefine variables installed, or shouldnotlink
+ installed=yes
+ shouldnotlink=no
+ avoidtemprpath=
+
+
+ # Read the .la file
+ func_source "$lib"
+
+ # Convert "-framework foo" to "foo.ltframework"
+ if test -n "$inherited_linker_flags"; then
+ tmp_inherited_linker_flags=`$ECHO "$inherited_linker_flags" | $SED 's/-framework \([^ $]*\)/\1.ltframework/g'`
+ for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do
+ case " $new_inherited_linker_flags " in
+ *" $tmp_inherited_linker_flag "*) ;;
+ *) func_append new_inherited_linker_flags " $tmp_inherited_linker_flag";;
+ esac
+ done
+ fi
+ dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+ if test "$linkmode,$pass" = "lib,link" ||
+ test "$linkmode,$pass" = "prog,scan" ||
+ { test "$linkmode" != prog && test "$linkmode" != lib; }; then
+ test -n "$dlopen" && func_append dlfiles " $dlopen"
+ test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen"
+ fi
+
+ if test "$pass" = conv; then
+ # Only check for convenience libraries
+ deplibs="$lib $deplibs"
+ if test -z "$libdir"; then
+ if test -z "$old_library"; then
+ func_fatal_error "cannot find name of link library for \`$lib'"
+ fi
+ # It is a libtool convenience library, so add in its objects.
+ func_append convenience " $ladir/$objdir/$old_library"
+ func_append old_convenience " $ladir/$objdir/$old_library"
+ elif test "$linkmode" != prog && test "$linkmode" != lib; then
+ func_fatal_error "\`$lib' is not a convenience library"
+ fi
+ tmp_libs=
+ for deplib in $dependency_libs; do
+ deplibs="$deplib $deplibs"
+ if $opt_preserve_dup_deps ; then
+ case "$tmp_libs " in
+ *" $deplib "*) func_append specialdeplibs " $deplib" ;;
+ esac
+ fi
+ func_append tmp_libs " $deplib"
+ done
+ continue
+ fi # $pass = conv
+
+
+ # Get the name of the library we link against.
+ linklib=
+ if test -n "$old_library" &&
+ { test "$prefer_static_libs" = yes ||
+ test "$prefer_static_libs,$installed" = "built,no"; }; then
+ linklib=$old_library
+ else
+ for l in $old_library $library_names; do
+ linklib="$l"
+ done
+ fi
+ if test -z "$linklib"; then
+ func_fatal_error "cannot find name of link library for \`$lib'"
+ fi
+
+ # This library was specified with -dlopen.
+ if test "$pass" = dlopen; then
+ if test -z "$libdir"; then
+ func_fatal_error "cannot -dlopen a convenience library: \`$lib'"
+ fi
+ if test -z "$dlname" ||
+ test "$dlopen_support" != yes ||
+ test "$build_libtool_libs" = no; then
+ # If there is no dlname, no dlopen support or we're linking
+ # statically, we need to preload. We also need to preload any
+ # dependent libraries so libltdl's deplib preloader doesn't
+ # bomb out in the load deplibs phase.
+ func_append dlprefiles " $lib $dependency_libs"
+ else
+ func_append newdlfiles " $lib"
+ fi
+ continue
+ fi # $pass = dlopen
+
+ # We need an absolute path.
+ case $ladir in
+ [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
+ *)
+ abs_ladir=`cd "$ladir" && pwd`
+ if test -z "$abs_ladir"; then
+ func_warning "cannot determine absolute directory name of \`$ladir'"
+ func_warning "passing it literally to the linker, although it might fail"
+ abs_ladir="$ladir"
+ fi
+ ;;
+ esac
+ func_basename "$lib"
+ laname="$func_basename_result"
+
+ # Find the relevant object directory and library name.
+ if test "X$installed" = Xyes; then
+ if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+ func_warning "library \`$lib' was moved."
+ dir="$ladir"
+ absdir="$abs_ladir"
+ libdir="$abs_ladir"
+ else
+ dir="$lt_sysroot$libdir"
+ absdir="$lt_sysroot$libdir"
+ fi
+ test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
+ else
+ if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+ dir="$ladir"
+ absdir="$abs_ladir"
+ # Remove this search path later
+ func_append notinst_path " $abs_ladir"
+ else
+ dir="$ladir/$objdir"
+ absdir="$abs_ladir/$objdir"
+ # Remove this search path later
+ func_append notinst_path " $abs_ladir"
+ fi
+ fi # $installed = yes
+ func_stripname 'lib' '.la' "$laname"
+ name=$func_stripname_result
+
+ # This library was specified with -dlpreopen.
+ if test "$pass" = dlpreopen; then
+ if test -z "$libdir" && test "$linkmode" = prog; then
+ func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'"
+ fi
+ case "$host" in
+ # special handling for platforms with PE-DLLs.
+ *cygwin* | *mingw* | *cegcc* )
+ # Linker will automatically link against shared library if both
+ # static and shared are present. Therefore, ensure we extract
+ # symbols from the import library if a shared library is present
+ # (otherwise, the dlopen module name will be incorrect). We do
+ # this by putting the import library name into $newdlprefiles.
+ # We recover the dlopen module name by 'saving' the la file
+ # name in a special purpose variable, and (later) extracting the
+ # dlname from the la file.
+ if test -n "$dlname"; then
+ func_tr_sh "$dir/$linklib"
+ eval "libfile_$func_tr_sh_result=\$abs_ladir/\$laname"
+ func_append newdlprefiles " $dir/$linklib"
+ else
+ func_append newdlprefiles " $dir/$old_library"
+ # Keep a list of preopened convenience libraries to check
+ # that they are being used correctly in the link pass.
+ test -z "$libdir" && \
+ func_append dlpreconveniencelibs " $dir/$old_library"
+ fi
+ ;;
+ * )
+ # Prefer using a static library (so that no silly _DYNAMIC symbols
+ # are required to link).
+ if test -n "$old_library"; then
+ func_append newdlprefiles " $dir/$old_library"
+ # Keep a list of preopened convenience libraries to check
+ # that they are being used correctly in the link pass.
+ test -z "$libdir" && \
+ func_append dlpreconveniencelibs " $dir/$old_library"
+ # Otherwise, use the dlname, so that lt_dlopen finds it.
+ elif test -n "$dlname"; then
+ func_append newdlprefiles " $dir/$dlname"
+ else
+ func_append newdlprefiles " $dir/$linklib"
+ fi
+ ;;
+ esac
+ fi # $pass = dlpreopen
+
+ if test -z "$libdir"; then
+ # Link the convenience library
+ if test "$linkmode" = lib; then
+ deplibs="$dir/$old_library $deplibs"
+ elif test "$linkmode,$pass" = "prog,link"; then
+ compile_deplibs="$dir/$old_library $compile_deplibs"
+ finalize_deplibs="$dir/$old_library $finalize_deplibs"
+ else
+ deplibs="$lib $deplibs" # used for prog,scan pass
+ fi
+ continue
+ fi
+
+
+ if test "$linkmode" = prog && test "$pass" != link; then
+ func_append newlib_search_path " $ladir"
+ deplibs="$lib $deplibs"
+
+ linkalldeplibs=no
+ if test "$link_all_deplibs" != no || test -z "$library_names" ||
+ test "$build_libtool_libs" = no; then
+ linkalldeplibs=yes
+ fi
+
+ tmp_libs=
+ for deplib in $dependency_libs; do
+ case $deplib in
+ -L*) func_stripname '-L' '' "$deplib"
+ func_resolve_sysroot "$func_stripname_result"
+ func_append newlib_search_path " $func_resolve_sysroot_result"
+ ;;
+ esac
+ # Need to link against all dependency_libs?
+ if test "$linkalldeplibs" = yes; then
+ deplibs="$deplib $deplibs"
+ else
+ # Need to hardcode shared library paths
+ # or/and link against static libraries
+ newdependency_libs="$deplib $newdependency_libs"
+ fi
+ if $opt_preserve_dup_deps ; then
+ case "$tmp_libs " in
+ *" $deplib "*) func_append specialdeplibs " $deplib" ;;
+ esac
+ fi
+ func_append tmp_libs " $deplib"
+ done # for deplib
+ continue
+ fi # $linkmode = prog...
+
+ if test "$linkmode,$pass" = "prog,link"; then
+ if test -n "$library_names" &&
+ { { test "$prefer_static_libs" = no ||
+ test "$prefer_static_libs,$installed" = "built,yes"; } ||
+ test -z "$old_library"; }; then
+ # We need to hardcode the library path
+ if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
+ # Make sure the rpath contains only unique directories.
+ case "$temp_rpath:" in
+ *"$absdir:"*) ;;
+ *) func_append temp_rpath "$absdir:" ;;
+ esac
+ fi
+
+ # Hardcode the library path.
+ # Skip directories that are in the system default run-time
+ # search path.
+ case " $sys_lib_dlsearch_path " in
+ *" $absdir "*) ;;
+ *)
+ case "$compile_rpath " in
+ *" $absdir "*) ;;
+ *) func_append compile_rpath " $absdir" ;;
+ esac
+ ;;
+ esac
+ case " $sys_lib_dlsearch_path " in
+ *" $libdir "*) ;;
+ *)
+ case "$finalize_rpath " in
+ *" $libdir "*) ;;
+ *) func_append finalize_rpath " $libdir" ;;
+ esac
+ ;;
+ esac
+ fi # $linkmode,$pass = prog,link...
+
+ if test "$alldeplibs" = yes &&
+ { test "$deplibs_check_method" = pass_all ||
+ { test "$build_libtool_libs" = yes &&
+ test -n "$library_names"; }; }; then
+ # We only need to search for static libraries
+ continue
+ fi
+ fi
+
+ link_static=no # Whether the deplib will be linked statically
+ use_static_libs=$prefer_static_libs
+ if test "$use_static_libs" = built && test "$installed" = yes; then
+ use_static_libs=no
+ fi
+ if test -n "$library_names" &&
+ { test "$use_static_libs" = no || test -z "$old_library"; }; then
+ case $host in
+ *cygwin* | *mingw* | *cegcc*)
+ # No point in relinking DLLs because paths are not encoded
+ func_append notinst_deplibs " $lib"
+ need_relink=no
+ ;;
+ *)
+ if test "$installed" = no; then
+ func_append notinst_deplibs " $lib"
+ need_relink=yes
+ fi
+ ;;
+ esac
+ # This is a shared library
+
+ # Warn about portability, can't link against -module's on some
+ # systems (darwin). Don't bleat about dlopened modules though!
+ dlopenmodule=""
+ for dlpremoduletest in $dlprefiles; do
+ if test "X$dlpremoduletest" = "X$lib"; then
+ dlopenmodule="$dlpremoduletest"
+ break
+ fi
+ done
+ if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then
+ echo
+ if test "$linkmode" = prog; then
+ $ECHO "*** Warning: Linking the executable $output against the loadable module"
+ else
+ $ECHO "*** Warning: Linking the shared library $output against the loadable module"
+ fi
+ $ECHO "*** $linklib is not portable!"
+ fi
+ if test "$linkmode" = lib &&
+ test "$hardcode_into_libs" = yes; then
+ # Hardcode the library path.
+ # Skip directories that are in the system default run-time
+ # search path.
+ case " $sys_lib_dlsearch_path " in
+ *" $absdir "*) ;;
+ *)
+ case "$compile_rpath " in
+ *" $absdir "*) ;;
+ *) func_append compile_rpath " $absdir" ;;
+ esac
+ ;;
+ esac
+ case " $sys_lib_dlsearch_path " in
+ *" $libdir "*) ;;
+ *)
+ case "$finalize_rpath " in
+ *" $libdir "*) ;;
+ *) func_append finalize_rpath " $libdir" ;;
+ esac
+ ;;
+ esac
+ fi
+
+ if test -n "$old_archive_from_expsyms_cmds"; then
+ # figure out the soname
+ set dummy $library_names
+ shift
+ realname="$1"
+ shift
+ libname=`eval "\\$ECHO \"$libname_spec\""`
+ # use dlname if we got it. it's perfectly good, no?
+ if test -n "$dlname"; then
+ soname="$dlname"
+ elif test -n "$soname_spec"; then
+ # bleh windows
+ case $host in
+ *cygwin* | mingw* | *cegcc*)
+ func_arith $current - $age
+ major=$func_arith_result
+ versuffix="-$major"
+ ;;
+ esac
+ eval soname=\"$soname_spec\"
+ else
+ soname="$realname"
+ fi
+
+ # Make a new name for the extract_expsyms_cmds to use
+ soroot="$soname"
+ func_basename "$soroot"
+ soname="$func_basename_result"
+ func_stripname 'lib' '.dll' "$soname"
+ newlib=libimp-$func_stripname_result.a
+
+ # If the library has no export list, then create one now
+ if test -f "$output_objdir/$soname-def"; then :
+ else
+ func_verbose "extracting exported symbol list from \`$soname'"
+ func_execute_cmds "$extract_expsyms_cmds" 'exit $?'
+ fi
+
+ # Create $newlib
+ if test -f "$output_objdir/$newlib"; then :; else
+ func_verbose "generating import library for \`$soname'"
+ func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?'
+ fi
+ # make sure the library variables are pointing to the new library
+ dir=$output_objdir
+ linklib=$newlib
+ fi # test -n "$old_archive_from_expsyms_cmds"
+
+ if test "$linkmode" = prog || test "$opt_mode" != relink; then
+ add_shlibpath=
+ add_dir=
+ add=
+ lib_linked=yes
+ case $hardcode_action in
+ immediate | unsupported)
+ if test "$hardcode_direct" = no; then
+ add="$dir/$linklib"
+ case $host in
+ *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;;
+ *-*-sysv4*uw2*) add_dir="-L$dir" ;;
+ *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
+ *-*-unixware7*) add_dir="-L$dir" ;;
+ *-*-darwin* )
+ # if the lib is a (non-dlopened) module then we can not
+ # link against it, someone is ignoring the earlier warnings
+ if /usr/bin/file -L $add 2> /dev/null |
+ $GREP ": [^:]* bundle" >/dev/null ; then
+ if test "X$dlopenmodule" != "X$lib"; then
+ $ECHO "*** Warning: lib $linklib is a module, not a shared library"
+ if test -z "$old_library" ; then
+ echo
+ echo "*** And there doesn't seem to be a static archive available"
+ echo "*** The link will probably fail, sorry"
+ else
+ add="$dir/$old_library"
+ fi
+ elif test -n "$old_library"; then
+ add="$dir/$old_library"
+ fi
+ fi
+ esac
+ elif test "$hardcode_minus_L" = no; then
+ case $host in
+ *-*-sunos*) add_shlibpath="$dir" ;;
+ esac
+ add_dir="-L$dir"
+ add="-l$name"
+ elif test "$hardcode_shlibpath_var" = no; then
+ add_shlibpath="$dir"
+ add="-l$name"
+ else
+ lib_linked=no
+ fi
+ ;;
+ relink)
+ if test "$hardcode_direct" = yes &&
+ test "$hardcode_direct_absolute" = no; then
+ add="$dir/$linklib"
+ elif test "$hardcode_minus_L" = yes; then
+ add_dir="-L$absdir"
+ # Try looking first in the location we're being installed to.
+ if test -n "$inst_prefix_dir"; then
+ case $libdir in
+ [\\/]*)
+ func_append add_dir " -L$inst_prefix_dir$libdir"
+ ;;
+ esac
+ fi
+ add="-l$name"
+ elif test "$hardcode_shlibpath_var" = yes; then
+ add_shlibpath="$dir"
+ add="-l$name"
+ else
+ lib_linked=no
+ fi
+ ;;
+ *) lib_linked=no ;;
+ esac
+
+ if test "$lib_linked" != yes; then
+ func_fatal_configuration "unsupported hardcode properties"
+ fi
+
+ if test -n "$add_shlibpath"; then
+ case :$compile_shlibpath: in
+ *":$add_shlibpath:"*) ;;
+ *) func_append compile_shlibpath "$add_shlibpath:" ;;
+ esac
+ fi
+ if test "$linkmode" = prog; then
+ test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
+ test -n "$add" && compile_deplibs="$add $compile_deplibs"
+ else
+ test -n "$add_dir" && deplibs="$add_dir $deplibs"
+ test -n "$add" && deplibs="$add $deplibs"
+ if test "$hardcode_direct" != yes &&
+ test "$hardcode_minus_L" != yes &&
+ test "$hardcode_shlibpath_var" = yes; then
+ case :$finalize_shlibpath: in
+ *":$libdir:"*) ;;
+ *) func_append finalize_shlibpath "$libdir:" ;;
+ esac
+ fi
+ fi
+ fi
+
+ if test "$linkmode" = prog || test "$opt_mode" = relink; then
+ add_shlibpath=
+ add_dir=
+ add=
+ # Finalize command for both is simple: just hardcode it.
+ if test "$hardcode_direct" = yes &&
+ test "$hardcode_direct_absolute" = no; then
+ add="$libdir/$linklib"
+ elif test "$hardcode_minus_L" = yes; then
+ add_dir="-L$libdir"
+ add="-l$name"
+ elif test "$hardcode_shlibpath_var" = yes; then
+ case :$finalize_shlibpath: in
+ *":$libdir:"*) ;;
+ *) func_append finalize_shlibpath "$libdir:" ;;
+ esac
+ add="-l$name"
+ elif test "$hardcode_automatic" = yes; then
+ if test -n "$inst_prefix_dir" &&
+ test -f "$inst_prefix_dir$libdir/$linklib" ; then
+ add="$inst_prefix_dir$libdir/$linklib"
+ else
+ add="$libdir/$linklib"
+ fi
+ else
+ # We cannot seem to hardcode it, guess we'll fake it.
+ add_dir="-L$libdir"
+ # Try looking first in the location we're being installed to.
+ if test -n "$inst_prefix_dir"; then
+ case $libdir in
+ [\\/]*)
+ func_append add_dir " -L$inst_prefix_dir$libdir"
+ ;;
+ esac
+ fi
+ add="-l$name"
+ fi
+
+ if test "$linkmode" = prog; then
+ test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
+ test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
+ else
+ test -n "$add_dir" && deplibs="$add_dir $deplibs"
+ test -n "$add" && deplibs="$add $deplibs"
+ fi
+ fi
+ elif test "$linkmode" = prog; then
+ # Here we assume that one of hardcode_direct or hardcode_minus_L
+ # is not unsupported. This is valid on all known static and
+ # shared platforms.
+ if test "$hardcode_direct" != unsupported; then
+ test -n "$old_library" && linklib="$old_library"
+ compile_deplibs="$dir/$linklib $compile_deplibs"
+ finalize_deplibs="$dir/$linklib $finalize_deplibs"
+ else
+ compile_deplibs="-l$name -L$dir $compile_deplibs"
+ finalize_deplibs="-l$name -L$dir $finalize_deplibs"
+ fi
+ elif test "$build_libtool_libs" = yes; then
+ # Not a shared library
+ if test "$deplibs_check_method" != pass_all; then
+ # We're trying link a shared library against a static one
+ # but the system doesn't support it.
+
+ # Just print a warning and add the library to dependency_libs so
+ # that the program can be linked against the static library.
+ echo
+ $ECHO "*** Warning: This system can not link to static lib archive $lib."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which you do not appear to have."
+ if test "$module" = yes; then
+ echo "*** But as you try to build a module library, libtool will still create "
+ echo "*** a static module, that should work as long as the dlopening application"
+ echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
+ if test -z "$global_symbol_pipe"; then
+ echo
+ echo "*** However, this would only work if libtool was able to extract symbol"
+ echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+ echo "*** not find such a program. So, this module is probably useless."
+ echo "*** \`nm' from GNU binutils and a full rebuild may help."
+ fi
+ if test "$build_old_libs" = no; then
+ build_libtool_libs=module
+ build_old_libs=yes
+ else
+ build_libtool_libs=no
+ fi
+ fi
+ else
+ deplibs="$dir/$old_library $deplibs"
+ link_static=yes
+ fi
+ fi # link shared/static library?
+
+ if test "$linkmode" = lib; then
+ if test -n "$dependency_libs" &&
+ { test "$hardcode_into_libs" != yes ||
+ test "$build_old_libs" = yes ||
+ test "$link_static" = yes; }; then
+ # Extract -R from dependency_libs
+ temp_deplibs=
+ for libdir in $dependency_libs; do
+ case $libdir in
+ -R*) func_stripname '-R' '' "$libdir"
+ temp_xrpath=$func_stripname_result
+ case " $xrpath " in
+ *" $temp_xrpath "*) ;;
+ *) func_append xrpath " $temp_xrpath";;
+ esac;;
+ *) func_append temp_deplibs " $libdir";;
+ esac
+ done
+ dependency_libs="$temp_deplibs"
+ fi
+
+ func_append newlib_search_path " $absdir"
+ # Link against this library
+ test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
+ # ... and its dependency_libs
+ tmp_libs=
+ for deplib in $dependency_libs; do
+ newdependency_libs="$deplib $newdependency_libs"
+ case $deplib in
+ -L*) func_stripname '-L' '' "$deplib"
+ func_resolve_sysroot "$func_stripname_result";;
+ *) func_resolve_sysroot "$deplib" ;;
+ esac
+ if $opt_preserve_dup_deps ; then
+ case "$tmp_libs " in
+ *" $func_resolve_sysroot_result "*)
+ func_append specialdeplibs " $func_resolve_sysroot_result" ;;
+ esac
+ fi
+ func_append tmp_libs " $func_resolve_sysroot_result"
+ done
+
+ if test "$link_all_deplibs" != no; then
+ # Add the search paths of all dependency libraries
+ for deplib in $dependency_libs; do
+ path=
+ case $deplib in
+ -L*) path="$deplib" ;;
+ *.la)
+ func_resolve_sysroot "$deplib"
+ deplib=$func_resolve_sysroot_result
+ func_dirname "$deplib" "" "."
+ dir=$func_dirname_result
+ # We need an absolute path.
+ case $dir in
+ [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
+ *)
+ absdir=`cd "$dir" && pwd`
+ if test -z "$absdir"; then
+ func_warning "cannot determine absolute directory name of \`$dir'"
+ absdir="$dir"
+ fi
+ ;;
+ esac
+ if $GREP "^installed=no" $deplib > /dev/null; then
+ case $host in
+ *-*-darwin*)
+ depdepl=
+ eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
+ if test -n "$deplibrary_names" ; then
+ for tmp in $deplibrary_names ; do
+ depdepl=$tmp
+ done
+ if test -f "$absdir/$objdir/$depdepl" ; then
+ depdepl="$absdir/$objdir/$depdepl"
+ darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
+ if test -z "$darwin_install_name"; then
+ darwin_install_name=`${OTOOL64} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
+ fi
+ func_append compiler_flags " ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}"
+ func_append linker_flags " -dylib_file ${darwin_install_name}:${depdepl}"
+ path=
+ fi
+ fi
+ ;;
+ *)
+ path="-L$absdir/$objdir"
+ ;;
+ esac
+ else
+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+ test -z "$libdir" && \
+ func_fatal_error "\`$deplib' is not a valid libtool archive"
+ test "$absdir" != "$libdir" && \
+ func_warning "\`$deplib' seems to be moved"
+
+ path="-L$absdir"
+ fi
+ ;;
+ esac
+ case " $deplibs " in
+ *" $path "*) ;;
+ *) deplibs="$path $deplibs" ;;
+ esac
+ done
+ fi # link_all_deplibs != no
+ fi # linkmode = lib
+ done # for deplib in $libs
+ if test "$pass" = link; then
+ if test "$linkmode" = "prog"; then
+ compile_deplibs="$new_inherited_linker_flags $compile_deplibs"
+ finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs"
+ else
+ compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+ fi
+ fi
+ dependency_libs="$newdependency_libs"
+ if test "$pass" = dlpreopen; then
+ # Link the dlpreopened libraries before other libraries
+ for deplib in $save_deplibs; do
+ deplibs="$deplib $deplibs"
+ done
+ fi
+ if test "$pass" != dlopen; then
+ if test "$pass" != conv; then
+ # Make sure lib_search_path contains only unique directories.
+ lib_search_path=
+ for dir in $newlib_search_path; do
+ case "$lib_search_path " in
+ *" $dir "*) ;;
+ *) func_append lib_search_path " $dir" ;;
+ esac
+ done
+ newlib_search_path=
+ fi
+
+ if test "$linkmode,$pass" != "prog,link"; then
+ vars="deplibs"
+ else
+ vars="compile_deplibs finalize_deplibs"
+ fi
+ for var in $vars dependency_libs; do
+ # Add libraries to $var in reverse order
+ eval tmp_libs=\"\$$var\"
+ new_libs=
+ for deplib in $tmp_libs; do
+ # FIXME: Pedantically, this is the right thing to do, so
+ # that some nasty dependency loop isn't accidentally
+ # broken:
+ #new_libs="$deplib $new_libs"
+ # Pragmatically, this seems to cause very few problems in
+ # practice:
+ case $deplib in
+ -L*) new_libs="$deplib $new_libs" ;;
+ -R*) ;;
+ *)
+ # And here is the reason: when a library appears more
+ # than once as an explicit dependence of a library, or
+ # is implicitly linked in more than once by the
+ # compiler, it is considered special, and multiple
+ # occurrences thereof are not removed. Compare this
+ # with having the same library being listed as a
+ # dependency of multiple other libraries: in this case,
+ # we know (pedantically, we assume) the library does not
+ # need to be listed more than once, so we keep only the
+ # last copy. This is not always right, but it is rare
+ # enough that we require users that really mean to play
+ # such unportable linking tricks to link the library
+ # using -Wl,-lname, so that libtool does not consider it
+ # for duplicate removal.
+ case " $specialdeplibs " in
+ *" $deplib "*) new_libs="$deplib $new_libs" ;;
+ *)
+ case " $new_libs " in
+ *" $deplib "*) ;;
+ *) new_libs="$deplib $new_libs" ;;
+ esac
+ ;;
+ esac
+ ;;
+ esac
+ done
+ tmp_libs=
+ for deplib in $new_libs; do
+ case $deplib in
+ -L*)
+ case " $tmp_libs " in
+ *" $deplib "*) ;;
+ *) func_append tmp_libs " $deplib" ;;
+ esac
+ ;;
+ *) func_append tmp_libs " $deplib" ;;
+ esac
+ done
+ eval $var=\"$tmp_libs\"
+ done # for var
+ fi
+ # Last step: remove runtime libs from dependency_libs
+ # (they stay in deplibs)
+ tmp_libs=
+ for i in $dependency_libs ; do
+ case " $predeps $postdeps $compiler_lib_search_path " in
+ *" $i "*)
+ i=""
+ ;;
+ esac
+ if test -n "$i" ; then
+ func_append tmp_libs " $i"
+ fi
+ done
+ dependency_libs=$tmp_libs
+ done # for pass
+ if test "$linkmode" = prog; then
+ dlfiles="$newdlfiles"
+ fi
+ if test "$linkmode" = prog || test "$linkmode" = lib; then
+ dlprefiles="$newdlprefiles"
+ fi
+
+ case $linkmode in
+ oldlib)
+ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+ func_warning "\`-dlopen' is ignored for archives"
+ fi
+
+ case " $deplibs" in
+ *\ -l* | *\ -L*)
+ func_warning "\`-l' and \`-L' are ignored for archives" ;;
+ esac
+
+ test -n "$rpath" && \
+ func_warning "\`-rpath' is ignored for archives"
+
+ test -n "$xrpath" && \
+ func_warning "\`-R' is ignored for archives"
+
+ test -n "$vinfo" && \
+ func_warning "\`-version-info/-version-number' is ignored for archives"
+
+ test -n "$release" && \
+ func_warning "\`-release' is ignored for archives"
+
+ test -n "$export_symbols$export_symbols_regex" && \
+ func_warning "\`-export-symbols' is ignored for archives"
+
+ # Now set the variables for building old libraries.
+ build_libtool_libs=no
+ oldlibs="$output"
+ func_append objs "$old_deplibs"
+ ;;
+
+ lib)
+ # Make sure we only generate libraries of the form `libNAME.la'.
+ case $outputname in
+ lib*)
+ func_stripname 'lib' '.la' "$outputname"
+ name=$func_stripname_result
+ eval shared_ext=\"$shrext_cmds\"
+ eval libname=\"$libname_spec\"
+ ;;
+ *)
+ test "$module" = no && \
+ func_fatal_help "libtool library \`$output' must begin with \`lib'"
+
+ if test "$need_lib_prefix" != no; then
+ # Add the "lib" prefix for modules if required
+ func_stripname '' '.la' "$outputname"
+ name=$func_stripname_result
+ eval shared_ext=\"$shrext_cmds\"
+ eval libname=\"$libname_spec\"
+ else
+ func_stripname '' '.la' "$outputname"
+ libname=$func_stripname_result
+ fi
+ ;;
+ esac
+
+ if test -n "$objs"; then
+ if test "$deplibs_check_method" != pass_all; then
+ func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs"
+ else
+ echo
+ $ECHO "*** Warning: Linking the shared library $output against the non-libtool"
+ $ECHO "*** objects $objs is not portable!"
+ func_append libobjs " $objs"
+ fi
+ fi
+
+ test "$dlself" != no && \
+ func_warning "\`-dlopen self' is ignored for libtool libraries"
+
+ set dummy $rpath
+ shift
+ test "$#" -gt 1 && \
+ func_warning "ignoring multiple \`-rpath's for a libtool library"
+
+ install_libdir="$1"
+
+ oldlibs=
+ if test -z "$rpath"; then
+ if test "$build_libtool_libs" = yes; then
+ # Building a libtool convenience library.
+ # Some compilers have problems with a `.al' extension so
+ # convenience libraries should have the same extension an
+ # archive normally would.
+ oldlibs="$output_objdir/$libname.$libext $oldlibs"
+ build_libtool_libs=convenience
+ build_old_libs=yes
+ fi
+
+ test -n "$vinfo" && \
+ func_warning "\`-version-info/-version-number' is ignored for convenience libraries"
+
+ test -n "$release" && \
+ func_warning "\`-release' is ignored for convenience libraries"
+ else
+
+ # Parse the version information argument.
+ save_ifs="$IFS"; IFS=':'
+ set dummy $vinfo 0 0 0
+ shift
+ IFS="$save_ifs"
+
+ test -n "$7" && \
+ func_fatal_help "too many parameters to \`-version-info'"
+
+ # convert absolute version numbers to libtool ages
+ # this retains compatibility with .la files and attempts
+ # to make the code below a bit more comprehensible
+
+ case $vinfo_number in
+ yes)
+ number_major="$1"
+ number_minor="$2"
+ number_revision="$3"
+ #
+ # There are really only two kinds -- those that
+ # use the current revision as the major version
+ # and those that subtract age and use age as
+ # a minor version. But, then there is irix
+ # which has an extra 1 added just for fun
+ #
+ case $version_type in
+ # correct linux to gnu/linux during the next big refactor
+ darwin|linux|osf|windows|none)
+ func_arith $number_major + $number_minor
+ current=$func_arith_result
+ age="$number_minor"
+ revision="$number_revision"
+ ;;
+ freebsd-aout|freebsd-elf|qnx|sunos)
+ current="$number_major"
+ revision="$number_minor"
+ age="0"
+ ;;
+ irix|nonstopux)
+ func_arith $number_major + $number_minor
+ current=$func_arith_result
+ age="$number_minor"
+ revision="$number_minor"
+ lt_irix_increment=no
+ ;;
+ esac
+ ;;
+ no)
+ current="$1"
+ revision="$2"
+ age="$3"
+ ;;
+ esac
+
+ # Check that each of the things are valid numbers.
+ case $current in
+ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+ *)
+ func_error "CURRENT \`$current' must be a nonnegative integer"
+ func_fatal_error "\`$vinfo' is not valid version information"
+ ;;
+ esac
+
+ case $revision in
+ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+ *)
+ func_error "REVISION \`$revision' must be a nonnegative integer"
+ func_fatal_error "\`$vinfo' is not valid version information"
+ ;;
+ esac
+
+ case $age in
+ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+ *)
+ func_error "AGE \`$age' must be a nonnegative integer"
+ func_fatal_error "\`$vinfo' is not valid version information"
+ ;;
+ esac
+
+ if test "$age" -gt "$current"; then
+ func_error "AGE \`$age' is greater than the current interface number \`$current'"
+ func_fatal_error "\`$vinfo' is not valid version information"
+ fi
+
+ # Calculate the version variables.
+ major=
+ versuffix=
+ verstring=
+ case $version_type in
+ none) ;;
+
+ darwin)
+ # Like Linux, but with the current version available in
+ # verstring for coding it into the library header
+ func_arith $current - $age
+ major=.$func_arith_result
+ versuffix="$major.$age.$revision"
+ # Darwin ld doesn't like 0 for these options...
+ func_arith $current + 1
+ minor_current=$func_arith_result
+ xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
+ verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
+ ;;
+
+ freebsd-aout)
+ major=".$current"
+ versuffix=".$current.$revision";
+ ;;
+
+ freebsd-elf)
+ major=".$current"
+ versuffix=".$current"
+ ;;
+
+ irix | nonstopux)
+ if test "X$lt_irix_increment" = "Xno"; then
+ func_arith $current - $age
+ else
+ func_arith $current - $age + 1
+ fi
+ major=$func_arith_result
+
+ case $version_type in
+ nonstopux) verstring_prefix=nonstopux ;;
+ *) verstring_prefix=sgi ;;
+ esac
+ verstring="$verstring_prefix$major.$revision"
+
+ # Add in all the interfaces that we are compatible with.
+ loop=$revision
+ while test "$loop" -ne 0; do
+ func_arith $revision - $loop
+ iface=$func_arith_result
+ func_arith $loop - 1
+ loop=$func_arith_result
+ verstring="$verstring_prefix$major.$iface:$verstring"
+ done
+
+ # Before this point, $major must not contain `.'.
+ major=.$major
+ versuffix="$major.$revision"
+ ;;
+
+ linux) # correct to gnu/linux during the next big refactor
+ func_arith $current - $age
+ major=.$func_arith_result
+ versuffix="$major.$age.$revision"
+ ;;
+
+ osf)
+ func_arith $current - $age
+ major=.$func_arith_result
+ versuffix=".$current.$age.$revision"
+ verstring="$current.$age.$revision"
+
+ # Add in all the interfaces that we are compatible with.
+ loop=$age
+ while test "$loop" -ne 0; do
+ func_arith $current - $loop
+ iface=$func_arith_result
+ func_arith $loop - 1
+ loop=$func_arith_result
+ verstring="$verstring:${iface}.0"
+ done
+
+ # Make executables depend on our current version.
+ func_append verstring ":${current}.0"
+ ;;
+
+ qnx)
+ major=".$current"
+ versuffix=".$current"
+ ;;
+
+ sunos)
+ major=".$current"
+ versuffix=".$current.$revision"
+ ;;
+
+ windows)
+ # Use '-' rather than '.', since we only want one
+ # extension on DOS 8.3 filesystems.
+ func_arith $current - $age
+ major=$func_arith_result
+ versuffix="-$major"
+ ;;
+
+ *)
+ func_fatal_configuration "unknown library version type \`$version_type'"
+ ;;
+ esac
+
+ # Clear the version info if we defaulted, and they specified a release.
+ if test -z "$vinfo" && test -n "$release"; then
+ major=
+ case $version_type in
+ darwin)
+ # we can't check for "0.0" in archive_cmds due to quoting
+ # problems, so we reset it completely
+ verstring=
+ ;;
+ *)
+ verstring="0.0"
+ ;;
+ esac
+ if test "$need_version" = no; then
+ versuffix=
+ else
+ versuffix=".0.0"
+ fi
+ fi
+
+ # Remove version info from name if versioning should be avoided
+ if test "$avoid_version" = yes && test "$need_version" = no; then
+ major=
+ versuffix=
+ verstring=""
+ fi
+
+ # Check to see if the archive will have undefined symbols.
+ if test "$allow_undefined" = yes; then
+ if test "$allow_undefined_flag" = unsupported; then
+ func_warning "undefined symbols not allowed in $host shared libraries"
+ build_libtool_libs=no
+ build_old_libs=yes
+ fi
+ else
+ # Don't allow undefined symbols.
+ allow_undefined_flag="$no_undefined_flag"
+ fi
+
+ fi
+
+ func_generate_dlsyms "$libname" "$libname" "yes"
+ func_append libobjs " $symfileobj"
+ test "X$libobjs" = "X " && libobjs=
+
+ if test "$opt_mode" != relink; then
+ # Remove our outputs, but don't remove object files since they
+ # may have been created when compiling PIC objects.
+ removelist=
+ tempremovelist=`$ECHO "$output_objdir/*"`
+ for p in $tempremovelist; do
+ case $p in
+ *.$objext | *.gcno)
+ ;;
+ $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
+ if test "X$precious_files_regex" != "X"; then
+ if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
+ then
+ continue
+ fi
+ fi
+ func_append removelist " $p"
+ ;;
+ *) ;;
+ esac
+ done
+ test -n "$removelist" && \
+ func_show_eval "${RM}r \$removelist"
+ fi
+
+ # Now set the variables for building old libraries.
+ if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
+ func_append oldlibs " $output_objdir/$libname.$libext"
+
+ # Transform .lo files to .o files.
+ oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; $lo2o" | $NL2SP`
+ fi
+
+ # Eliminate all temporary directories.
+ #for path in $notinst_path; do
+ # lib_search_path=`$ECHO "$lib_search_path " | $SED "s% $path % %g"`
+ # deplibs=`$ECHO "$deplibs " | $SED "s% -L$path % %g"`
+ # dependency_libs=`$ECHO "$dependency_libs " | $SED "s% -L$path % %g"`
+ #done
+
+ if test -n "$xrpath"; then
+ # If the user specified any rpath flags, then add them.
+ temp_xrpath=
+ for libdir in $xrpath; do
+ func_replace_sysroot "$libdir"
+ func_append temp_xrpath " -R$func_replace_sysroot_result"
+ case "$finalize_rpath " in
+ *" $libdir "*) ;;
+ *) func_append finalize_rpath " $libdir" ;;
+ esac
+ done
+ if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
+ dependency_libs="$temp_xrpath $dependency_libs"
+ fi
+ fi
+
+ # Make sure dlfiles contains only unique files that won't be dlpreopened
+ old_dlfiles="$dlfiles"
+ dlfiles=
+ for lib in $old_dlfiles; do
+ case " $dlprefiles $dlfiles " in
+ *" $lib "*) ;;
+ *) func_append dlfiles " $lib" ;;
+ esac
+ done
+
+ # Make sure dlprefiles contains only unique files
+ old_dlprefiles="$dlprefiles"
+ dlprefiles=
+ for lib in $old_dlprefiles; do
+ case "$dlprefiles " in
+ *" $lib "*) ;;
+ *) func_append dlprefiles " $lib" ;;
+ esac
+ done
+
+ if test "$build_libtool_libs" = yes; then
+ if test -n "$rpath"; then
+ case $host in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*)
+ # these systems don't actually have a c library (as such)!
+ ;;
+ *-*-rhapsody* | *-*-darwin1.[012])
+ # Rhapsody C library is in the System framework
+ func_append deplibs " System.ltframework"
+ ;;
+ *-*-netbsd*)
+ # Don't link with libc until the a.out ld.so is fixed.
+ ;;
+ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+ # Do not include libc due to us having libc/libc_r.
+ ;;
+ *-*-sco3.2v5* | *-*-sco5v6*)
+ # Causes problems with __ctype
+ ;;
+ *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
+ # Compiler inserts libc in the correct place for threads to work
+ ;;
+ *)
+ # Add libc to deplibs on all other systems if necessary.
+ if test "$build_libtool_need_lc" = "yes"; then
+ func_append deplibs " -lc"
+ fi
+ ;;
+ esac
+ fi
+
+ # Transform deplibs into only deplibs that can be linked in shared.
+ name_save=$name
+ libname_save=$libname
+ release_save=$release
+ versuffix_save=$versuffix
+ major_save=$major
+ # I'm not sure if I'm treating the release correctly. I think
+ # release should show up in the -l (ie -lgmp5) so we don't want to
+ # add it in twice. Is that correct?
+ release=""
+ versuffix=""
+ major=""
+ newdeplibs=
+ droppeddeps=no
+ case $deplibs_check_method in
+ pass_all)
+ # Don't check for shared/static. Everything works.
+ # This might be a little naive. We might want to check
+ # whether the library exists or not. But this is on
+ # osf3 & osf4 and I'm not really sure... Just
+ # implementing what was already the behavior.
+ newdeplibs=$deplibs
+ ;;
+ test_compile)
+ # This code stresses the "libraries are programs" paradigm to its
+ # limits. Maybe even breaks it. We compile a program, linking it
+ # against the deplibs as a proxy for the library. Then we can check
+ # whether they linked in statically or dynamically with ldd.
+ $opt_dry_run || $RM conftest.c
+ cat > conftest.c <<EOF
+ int main() { return 0; }
+EOF
+ $opt_dry_run || $RM conftest
+ if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then
+ ldd_output=`ldd conftest`
+ for i in $deplibs; do
+ case $i in
+ -l*)
+ func_stripname -l '' "$i"
+ name=$func_stripname_result
+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ case " $predeps $postdeps " in
+ *" $i "*)
+ func_append newdeplibs " $i"
+ i=""
+ ;;
+ esac
+ fi
+ if test -n "$i" ; then
+ libname=`eval "\\$ECHO \"$libname_spec\""`
+ deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
+ set dummy $deplib_matches; shift
+ deplib_match=$1
+ if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+ func_append newdeplibs " $i"
+ else
+ droppeddeps=yes
+ echo
+ $ECHO "*** Warning: dynamic linker does not accept needed library $i."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which I believe you do not have"
+ echo "*** because a test_compile did reveal that the linker did not use it for"
+ echo "*** its dynamic dependency list that programs get resolved with at runtime."
+ fi
+ fi
+ ;;
+ *)
+ func_append newdeplibs " $i"
+ ;;
+ esac
+ done
+ else
+ # Error occurred in the first compile. Let's try to salvage
+ # the situation: Compile a separate program for each library.
+ for i in $deplibs; do
+ case $i in
+ -l*)
+ func_stripname -l '' "$i"
+ name=$func_stripname_result
+ $opt_dry_run || $RM conftest
+ if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
+ ldd_output=`ldd conftest`
+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ case " $predeps $postdeps " in
+ *" $i "*)
+ func_append newdeplibs " $i"
+ i=""
+ ;;
+ esac
+ fi
+ if test -n "$i" ; then
+ libname=`eval "\\$ECHO \"$libname_spec\""`
+ deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
+ set dummy $deplib_matches; shift
+ deplib_match=$1
+ if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+ func_append newdeplibs " $i"
+ else
+ droppeddeps=yes
+ echo
+ $ECHO "*** Warning: dynamic linker does not accept needed library $i."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which you do not appear to have"
+ echo "*** because a test_compile did reveal that the linker did not use this one"
+ echo "*** as a dynamic dependency that programs can get resolved with at runtime."
+ fi
+ fi
+ else
+ droppeddeps=yes
+ echo
+ $ECHO "*** Warning! Library $i is needed by this library but I was not able to"
+ echo "*** make it link in! You will probably need to install it or some"
+ echo "*** library that it depends on before this library will be fully"
+ echo "*** functional. Installing it before continuing would be even better."
+ fi
+ ;;
+ *)
+ func_append newdeplibs " $i"
+ ;;
+ esac
+ done
+ fi
+ ;;
+ file_magic*)
+ set dummy $deplibs_check_method; shift
+ file_magic_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
+ for a_deplib in $deplibs; do
+ case $a_deplib in
+ -l*)
+ func_stripname -l '' "$a_deplib"
+ name=$func_stripname_result
+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ case " $predeps $postdeps " in
+ *" $a_deplib "*)
+ func_append newdeplibs " $a_deplib"
+ a_deplib=""
+ ;;
+ esac
+ fi
+ if test -n "$a_deplib" ; then
+ libname=`eval "\\$ECHO \"$libname_spec\""`
+ if test -n "$file_magic_glob"; then
+ libnameglob=`func_echo_all "$libname" | $SED -e $file_magic_glob`
+ else
+ libnameglob=$libname
+ fi
+ test "$want_nocaseglob" = yes && nocaseglob=`shopt -p nocaseglob`
+ for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+ if test "$want_nocaseglob" = yes; then
+ shopt -s nocaseglob
+ potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
+ $nocaseglob
+ else
+ potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
+ fi
+ for potent_lib in $potential_libs; do
+ # Follow soft links.
+ if ls -lLd "$potent_lib" 2>/dev/null |
+ $GREP " -> " >/dev/null; then
+ continue
+ fi
+ # The statement above tries to avoid entering an
+ # endless loop below, in case of cyclic links.
+ # We might still enter an endless loop, since a link
+ # loop can be closed while we follow links,
+ # but so what?
+ potlib="$potent_lib"
+ while test -h "$potlib" 2>/dev/null; do
+ potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
+ case $potliblink in
+ [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
+ *) potlib=`$ECHO "$potlib" | $SED 's,[^/]*$,,'`"$potliblink";;
+ esac
+ done
+ if eval $file_magic_cmd \"\$potlib\" 2>/dev/null |
+ $SED -e 10q |
+ $EGREP "$file_magic_regex" > /dev/null; then
+ func_append newdeplibs " $a_deplib"
+ a_deplib=""
+ break 2
+ fi
+ done
+ done
+ fi
+ if test -n "$a_deplib" ; then
+ droppeddeps=yes
+ echo
+ $ECHO "*** Warning: linker path does not have real file for library $a_deplib."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which you do not appear to have"
+ echo "*** because I did check the linker path looking for a file starting"
+ if test -z "$potlib" ; then
+ $ECHO "*** with $libname but no candidates were found. (...for file magic test)"
+ else
+ $ECHO "*** with $libname and none of the candidates passed a file format test"
+ $ECHO "*** using a file magic. Last file checked: $potlib"
+ fi
+ fi
+ ;;
+ *)
+ # Add a -L argument.
+ func_append newdeplibs " $a_deplib"
+ ;;
+ esac
+ done # Gone through all deplibs.
+ ;;
+ match_pattern*)
+ set dummy $deplibs_check_method; shift
+ match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
+ for a_deplib in $deplibs; do
+ case $a_deplib in
+ -l*)
+ func_stripname -l '' "$a_deplib"
+ name=$func_stripname_result
+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ case " $predeps $postdeps " in
+ *" $a_deplib "*)
+ func_append newdeplibs " $a_deplib"
+ a_deplib=""
+ ;;
+ esac
+ fi
+ if test -n "$a_deplib" ; then
+ libname=`eval "\\$ECHO \"$libname_spec\""`
+ for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+ potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
+ for potent_lib in $potential_libs; do
+ potlib="$potent_lib" # see symlink-check above in file_magic test
+ if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \
+ $EGREP "$match_pattern_regex" > /dev/null; then
+ func_append newdeplibs " $a_deplib"
+ a_deplib=""
+ break 2
+ fi
+ done
+ done
+ fi
+ if test -n "$a_deplib" ; then
+ droppeddeps=yes
+ echo
+ $ECHO "*** Warning: linker path does not have real file for library $a_deplib."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which you do not appear to have"
+ echo "*** because I did check the linker path looking for a file starting"
+ if test -z "$potlib" ; then
+ $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)"
+ else
+ $ECHO "*** with $libname and none of the candidates passed a file format test"
+ $ECHO "*** using a regex pattern. Last file checked: $potlib"
+ fi
+ fi
+ ;;
+ *)
+ # Add a -L argument.
+ func_append newdeplibs " $a_deplib"
+ ;;
+ esac
+ done # Gone through all deplibs.
+ ;;
+ none | unknown | *)
+ newdeplibs=""
+ tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'`
+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ for i in $predeps $postdeps ; do
+ # can't use Xsed below, because $i might contain '/'
+ tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s,$i,,"`
+ done
+ fi
+ case $tmp_deplibs in
+ *[!\ \ ]*)
+ echo
+ if test "X$deplibs_check_method" = "Xnone"; then
+ echo "*** Warning: inter-library dependencies are not supported in this platform."
+ else
+ echo "*** Warning: inter-library dependencies are not known to be supported."
+ fi
+ echo "*** All declared inter-library dependencies are being dropped."
+ droppeddeps=yes
+ ;;
+ esac
+ ;;
+ esac
+ versuffix=$versuffix_save
+ major=$major_save
+ release=$release_save
+ libname=$libname_save
+ name=$name_save
+
+ case $host in
+ *-*-rhapsody* | *-*-darwin1.[012])
+ # On Rhapsody replace the C library with the System framework
+ newdeplibs=`$ECHO " $newdeplibs" | $SED 's/ -lc / System.ltframework /'`
+ ;;
+ esac
+
+ if test "$droppeddeps" = yes; then
+ if test "$module" = yes; then
+ echo
+ echo "*** Warning: libtool could not satisfy all declared inter-library"
+ $ECHO "*** dependencies of module $libname. Therefore, libtool will create"
+ echo "*** a static module, that should work as long as the dlopening"
+ echo "*** application is linked with the -dlopen flag."
+ if test -z "$global_symbol_pipe"; then
+ echo
+ echo "*** However, this would only work if libtool was able to extract symbol"
+ echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+ echo "*** not find such a program. So, this module is probably useless."
+ echo "*** \`nm' from GNU binutils and a full rebuild may help."
+ fi
+ if test "$build_old_libs" = no; then
+ oldlibs="$output_objdir/$libname.$libext"
+ build_libtool_libs=module
+ build_old_libs=yes
+ else
+ build_libtool_libs=no
+ fi
+ else
+ echo "*** The inter-library dependencies that have been dropped here will be"
+ echo "*** automatically added whenever a program is linked with this library"
+ echo "*** or is declared to -dlopen it."
+
+ if test "$allow_undefined" = no; then
+ echo
+ echo "*** Since this library must not contain undefined symbols,"
+ echo "*** because either the platform does not support them or"
+ echo "*** it was explicitly requested with -no-undefined,"
+ echo "*** libtool will only create a static version of it."
+ if test "$build_old_libs" = no; then
+ oldlibs="$output_objdir/$libname.$libext"
+ build_libtool_libs=module
+ build_old_libs=yes
+ else
+ build_libtool_libs=no
+ fi
+ fi
+ fi
+ fi
+ # Done checking deplibs!
+ deplibs=$newdeplibs
+ fi
+ # Time to change all our "foo.ltframework" stuff back to "-framework foo"
+ case $host in
+ *-*-darwin*)
+ newdeplibs=`$ECHO " $newdeplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+ new_inherited_linker_flags=`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+ deplibs=`$ECHO " $deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+ ;;
+ esac
+
+ # move library search paths that coincide with paths to not yet
+ # installed libraries to the beginning of the library search list
+ new_libs=
+ for path in $notinst_path; do
+ case " $new_libs " in
+ *" -L$path/$objdir "*) ;;
+ *)
+ case " $deplibs " in
+ *" -L$path/$objdir "*)
+ func_append new_libs " -L$path/$objdir" ;;
+ esac
+ ;;
+ esac
+ done
+ for deplib in $deplibs; do
+ case $deplib in
+ -L*)
+ case " $new_libs " in
+ *" $deplib "*) ;;
+ *) func_append new_libs " $deplib" ;;
+ esac
+ ;;
+ *) func_append new_libs " $deplib" ;;
+ esac
+ done
+ deplibs="$new_libs"
+
+ # All the library-specific variables (install_libdir is set above).
+ library_names=
+ old_library=
+ dlname=
+
+ # Test again, we may have decided not to build it any more
+ if test "$build_libtool_libs" = yes; then
+ # Remove ${wl} instances when linking with ld.
+ # FIXME: should test the right _cmds variable.
+ case $archive_cmds in
+ *\$LD\ *) wl= ;;
+ esac
+ if test "$hardcode_into_libs" = yes; then
+ # Hardcode the library paths
+ hardcode_libdirs=
+ dep_rpath=
+ rpath="$finalize_rpath"
+ test "$opt_mode" != relink && rpath="$compile_rpath$rpath"
+ for libdir in $rpath; do
+ if test -n "$hardcode_libdir_flag_spec"; then
+ if test -n "$hardcode_libdir_separator"; then
+ func_replace_sysroot "$libdir"
+ libdir=$func_replace_sysroot_result
+ if test -z "$hardcode_libdirs"; then
+ hardcode_libdirs="$libdir"
+ else
+ # Just accumulate the unique libdirs.
+ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+ ;;
+ *)
+ func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
+ ;;
+ esac
+ fi
+ else
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ func_append dep_rpath " $flag"
+ fi
+ elif test -n "$runpath_var"; then
+ case "$perm_rpath " in
+ *" $libdir "*) ;;
+ *) func_append perm_rpath " $libdir" ;;
+ esac
+ fi
+ done
+ # Substitute the hardcoded libdirs into the rpath.
+ if test -n "$hardcode_libdir_separator" &&
+ test -n "$hardcode_libdirs"; then
+ libdir="$hardcode_libdirs"
+ eval "dep_rpath=\"$hardcode_libdir_flag_spec\""
+ fi
+ if test -n "$runpath_var" && test -n "$perm_rpath"; then
+ # We should set the runpath_var.
+ rpath=
+ for dir in $perm_rpath; do
+ func_append rpath "$dir:"
+ done
+ eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
+ fi
+ test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
+ fi
+
+ shlibpath="$finalize_shlibpath"
+ test "$opt_mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
+ if test -n "$shlibpath"; then
+ eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
+ fi
+
+ # Get the real and link names of the library.
+ eval shared_ext=\"$shrext_cmds\"
+ eval library_names=\"$library_names_spec\"
+ set dummy $library_names
+ shift
+ realname="$1"
+ shift
+
+ if test -n "$soname_spec"; then
+ eval soname=\"$soname_spec\"
+ else
+ soname="$realname"
+ fi
+ if test -z "$dlname"; then
+ dlname=$soname
+ fi
+
+ lib="$output_objdir/$realname"
+ linknames=
+ for link
+ do
+ func_append linknames " $link"
+ done
+
+ # Use standard objects if they are pic
+ test -z "$pic_flag" && libobjs=`$ECHO "$libobjs" | $SP2NL | $SED "$lo2o" | $NL2SP`
+ test "X$libobjs" = "X " && libobjs=
+
+ delfiles=
+ if test -n "$export_symbols" && test -n "$include_expsyms"; then
+ $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp"
+ export_symbols="$output_objdir/$libname.uexp"
+ func_append delfiles " $export_symbols"
+ fi
+
+ orig_export_symbols=
+ case $host_os in
+ cygwin* | mingw* | cegcc*)
+ if test -n "$export_symbols" && test -z "$export_symbols_regex"; then
+ # exporting using user supplied symfile
+ if test "x`$SED 1q $export_symbols`" != xEXPORTS; then
+ # and it's NOT already a .def file. Must figure out
+ # which of the given symbols are data symbols and tag
+ # them as such. So, trigger use of export_symbols_cmds.
+ # export_symbols gets reassigned inside the "prepare
+ # the list of exported symbols" if statement, so the
+ # include_expsyms logic still works.
+ orig_export_symbols="$export_symbols"
+ export_symbols=
+ always_export_symbols=yes
+ fi
+ fi
+ ;;
+ esac
+
+ # Prepare the list of exported symbols
+ if test -z "$export_symbols"; then
+ if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
+ func_verbose "generating symbol list for \`$libname.la'"
+ export_symbols="$output_objdir/$libname.exp"
+ $opt_dry_run || $RM $export_symbols
+ cmds=$export_symbols_cmds
+ save_ifs="$IFS"; IFS='~'
+ for cmd1 in $cmds; do
+ IFS="$save_ifs"
+ # Take the normal branch if the nm_file_list_spec branch
+ # doesn't work or if tool conversion is not needed.
+ case $nm_file_list_spec~$to_tool_file_cmd in
+ *~func_convert_file_noop | *~func_convert_file_msys_to_w32 | ~*)
+ try_normal_branch=yes
+ eval cmd=\"$cmd1\"
+ func_len " $cmd"
+ len=$func_len_result
+ ;;
+ *)
+ try_normal_branch=no
+ ;;
+ esac
+ if test "$try_normal_branch" = yes \
+ && { test "$len" -lt "$max_cmd_len" \
+ || test "$max_cmd_len" -le -1; }
+ then
+ func_show_eval "$cmd" 'exit $?'
+ skipped_export=false
+ elif test -n "$nm_file_list_spec"; then
+ func_basename "$output"
+ output_la=$func_basename_result
+ save_libobjs=$libobjs
+ save_output=$output
+ output=${output_objdir}/${output_la}.nm
+ func_to_tool_file "$output"
+ libobjs=$nm_file_list_spec$func_to_tool_file_result
+ func_append delfiles " $output"
+ func_verbose "creating $NM input file list: $output"
+ for obj in $save_libobjs; do
+ func_to_tool_file "$obj"
+ $ECHO "$func_to_tool_file_result"
+ done > "$output"
+ eval cmd=\"$cmd1\"
+ func_show_eval "$cmd" 'exit $?'
+ output=$save_output
+ libobjs=$save_libobjs
+ skipped_export=false
+ else
+ # The command line is too long to execute in one step.
+ func_verbose "using reloadable object file for export list..."
+ skipped_export=:
+ # Break out early, otherwise skipped_export may be
+ # set to false by a later but shorter cmd.
+ break
+ fi
+ done
+ IFS="$save_ifs"
+ if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then
+ func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
+ func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
+ fi
+ fi
+ fi
+
+ if test -n "$export_symbols" && test -n "$include_expsyms"; then
+ tmp_export_symbols="$export_symbols"
+ test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
+ $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
+ fi
+
+ if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then
+ # The given exports_symbols file has to be filtered, so filter it.
+ func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
+ # FIXME: $output_objdir/$libname.filter potentially contains lots of
+ # 's' commands which not all seds can handle. GNU sed should be fine
+ # though. Also, the filter scales superlinearly with the number of
+ # global variables. join(1) would be nice here, but unfortunately
+ # isn't a blessed tool.
+ $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
+ func_append delfiles " $export_symbols $output_objdir/$libname.filter"
+ export_symbols=$output_objdir/$libname.def
+ $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
+ fi
+
+ tmp_deplibs=
+ for test_deplib in $deplibs; do
+ case " $convenience " in
+ *" $test_deplib "*) ;;
+ *)
+ func_append tmp_deplibs " $test_deplib"
+ ;;
+ esac
+ done
+ deplibs="$tmp_deplibs"
+
+ if test -n "$convenience"; then
+ if test -n "$whole_archive_flag_spec" &&
+ test "$compiler_needs_object" = yes &&
+ test -z "$libobjs"; then
+ # extract the archives, so we have objects to list.
+ # TODO: could optimize this to just extract one archive.
+ whole_archive_flag_spec=
+ fi
+ if test -n "$whole_archive_flag_spec"; then
+ save_libobjs=$libobjs
+ eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+ test "X$libobjs" = "X " && libobjs=
+ else
+ gentop="$output_objdir/${outputname}x"
+ func_append generated " $gentop"
+
+ func_extract_archives $gentop $convenience
+ func_append libobjs " $func_extract_archives_result"
+ test "X$libobjs" = "X " && libobjs=
+ fi
+ fi
+
+ if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
+ eval flag=\"$thread_safe_flag_spec\"
+ func_append linker_flags " $flag"
+ fi
+
+ # Make a backup of the uninstalled library when relinking
+ if test "$opt_mode" = relink; then
+ $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $?
+ fi
+
+ # Do each of the archive commands.
+ if test "$module" = yes && test -n "$module_cmds" ; then
+ if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
+ eval test_cmds=\"$module_expsym_cmds\"
+ cmds=$module_expsym_cmds
+ else
+ eval test_cmds=\"$module_cmds\"
+ cmds=$module_cmds
+ fi
+ else
+ if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+ eval test_cmds=\"$archive_expsym_cmds\"
+ cmds=$archive_expsym_cmds
+ else
+ eval test_cmds=\"$archive_cmds\"
+ cmds=$archive_cmds
+ fi
+ fi
+
+ if test "X$skipped_export" != "X:" &&
+ func_len " $test_cmds" &&
+ len=$func_len_result &&
+ test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+ :
+ else
+ # The command line is too long to link in one step, link piecewise
+ # or, if using GNU ld and skipped_export is not :, use a linker
+ # script.
+
+ # Save the value of $output and $libobjs because we want to
+ # use them later. If we have whole_archive_flag_spec, we
+ # want to use save_libobjs as it was before
+ # whole_archive_flag_spec was expanded, because we can't
+ # assume the linker understands whole_archive_flag_spec.
+ # This may have to be revisited, in case too many
+ # convenience libraries get linked in and end up exceeding
+ # the spec.
+ if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
+ save_libobjs=$libobjs
+ fi
+ save_output=$output
+ func_basename "$output"
+ output_la=$func_basename_result
+
+ # Clear the reloadable object creation command queue and
+ # initialize k to one.
+ test_cmds=
+ concat_cmds=
+ objlist=
+ last_robj=
+ k=1
+
+ if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then
+ output=${output_objdir}/${output_la}.lnkscript
+ func_verbose "creating GNU ld script: $output"
+ echo 'INPUT (' > $output
+ for obj in $save_libobjs
+ do
+ func_to_tool_file "$obj"
+ $ECHO "$func_to_tool_file_result" >> $output
+ done
+ echo ')' >> $output
+ func_append delfiles " $output"
+ func_to_tool_file "$output"
+ output=$func_to_tool_file_result
+ elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then
+ output=${output_objdir}/${output_la}.lnk
+ func_verbose "creating linker input file list: $output"
+ : > $output
+ set x $save_libobjs
+ shift
+ firstobj=
+ if test "$compiler_needs_object" = yes; then
+ firstobj="$1 "
+ shift
+ fi
+ for obj
+ do
+ func_to_tool_file "$obj"
+ $ECHO "$func_to_tool_file_result" >> $output
+ done
+ func_append delfiles " $output"
+ func_to_tool_file "$output"
+ output=$firstobj\"$file_list_spec$func_to_tool_file_result\"
+ else
+ if test -n "$save_libobjs"; then
+ func_verbose "creating reloadable object files..."
+ output=$output_objdir/$output_la-${k}.$objext
+ eval test_cmds=\"$reload_cmds\"
+ func_len " $test_cmds"
+ len0=$func_len_result
+ len=$len0
+
+ # Loop over the list of objects to be linked.
+ for obj in $save_libobjs
+ do
+ func_len " $obj"
+ func_arith $len + $func_len_result
+ len=$func_arith_result
+ if test "X$objlist" = X ||
+ test "$len" -lt "$max_cmd_len"; then
+ func_append objlist " $obj"
+ else
+ # The command $test_cmds is almost too long, add a
+ # command to the queue.
+ if test "$k" -eq 1 ; then
+ # The first file doesn't have a previous command to add.
+ reload_objs=$objlist
+ eval concat_cmds=\"$reload_cmds\"
+ else
+ # All subsequent reloadable object files will link in
+ # the last one created.
+ reload_objs="$objlist $last_robj"
+ eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\"
+ fi
+ last_robj=$output_objdir/$output_la-${k}.$objext
+ func_arith $k + 1
+ k=$func_arith_result
+ output=$output_objdir/$output_la-${k}.$objext
+ objlist=" $obj"
+ func_len " $last_robj"
+ func_arith $len0 + $func_len_result
+ len=$func_arith_result
+ fi
+ done
+ # Handle the remaining objects by creating one last
+ # reloadable object file. All subsequent reloadable object
+ # files will link in the last one created.
+ test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+ reload_objs="$objlist $last_robj"
+ eval concat_cmds=\"\${concat_cmds}$reload_cmds\"
+ if test -n "$last_robj"; then
+ eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\"
+ fi
+ func_append delfiles " $output"
+
+ else
+ output=
+ fi
+
+ if ${skipped_export-false}; then
+ func_verbose "generating symbol list for \`$libname.la'"
+ export_symbols="$output_objdir/$libname.exp"
+ $opt_dry_run || $RM $export_symbols
+ libobjs=$output
+ # Append the command to create the export file.
+ test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+ eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\"
+ if test -n "$last_robj"; then
+ eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
+ fi
+ fi
+
+ test -n "$save_libobjs" &&
+ func_verbose "creating a temporary reloadable object file: $output"
+
+ # Loop through the commands generated above and execute them.
+ save_ifs="$IFS"; IFS='~'
+ for cmd in $concat_cmds; do
+ IFS="$save_ifs"
+ $opt_silent || {
+ func_quote_for_expand "$cmd"
+ eval "func_echo $func_quote_for_expand_result"
+ }
+ $opt_dry_run || eval "$cmd" || {
+ lt_exit=$?
+
+ # Restore the uninstalled library and exit
+ if test "$opt_mode" = relink; then
+ ( cd "$output_objdir" && \
+ $RM "${realname}T" && \
+ $MV "${realname}U" "$realname" )
+ fi
+
+ exit $lt_exit
+ }
+ done
+ IFS="$save_ifs"
+
+ if test -n "$export_symbols_regex" && ${skipped_export-false}; then
+ func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
+ func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
+ fi
+ fi
+
+ if ${skipped_export-false}; then
+ if test -n "$export_symbols" && test -n "$include_expsyms"; then
+ tmp_export_symbols="$export_symbols"
+ test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
+ $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
+ fi
+
+ if test -n "$orig_export_symbols"; then
+ # The given exports_symbols file has to be filtered, so filter it.
+ func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
+ # FIXME: $output_objdir/$libname.filter potentially contains lots of
+ # 's' commands which not all seds can handle. GNU sed should be fine
+ # though. Also, the filter scales superlinearly with the number of
+ # global variables. join(1) would be nice here, but unfortunately
+ # isn't a blessed tool.
+ $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
+ func_append delfiles " $export_symbols $output_objdir/$libname.filter"
+ export_symbols=$output_objdir/$libname.def
+ $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
+ fi
+ fi
+
+ libobjs=$output
+ # Restore the value of output.
+ output=$save_output
+
+ if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
+ eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+ test "X$libobjs" = "X " && libobjs=
+ fi
+ # Expand the library linking commands again to reset the
+ # value of $libobjs for piecewise linking.
+
+ # Do each of the archive commands.
+ if test "$module" = yes && test -n "$module_cmds" ; then
+ if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
+ cmds=$module_expsym_cmds
+ else
+ cmds=$module_cmds
+ fi
+ else
+ if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+ cmds=$archive_expsym_cmds
+ else
+ cmds=$archive_cmds
+ fi
+ fi
+ fi
+
+ if test -n "$delfiles"; then
+ # Append the command to remove temporary files to $cmds.
+ eval cmds=\"\$cmds~\$RM $delfiles\"
+ fi
+
+ # Add any objects from preloaded convenience libraries
+ if test -n "$dlprefiles"; then
+ gentop="$output_objdir/${outputname}x"
+ func_append generated " $gentop"
+
+ func_extract_archives $gentop $dlprefiles
+ func_append libobjs " $func_extract_archives_result"
+ test "X$libobjs" = "X " && libobjs=
+ fi
+
+ save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
+ eval cmd=\"$cmd\"
+ $opt_silent || {
+ func_quote_for_expand "$cmd"
+ eval "func_echo $func_quote_for_expand_result"
+ }
+ $opt_dry_run || eval "$cmd" || {
+ lt_exit=$?
+
+ # Restore the uninstalled library and exit
+ if test "$opt_mode" = relink; then
+ ( cd "$output_objdir" && \
+ $RM "${realname}T" && \
+ $MV "${realname}U" "$realname" )
+ fi
+
+ exit $lt_exit
+ }
+ done
+ IFS="$save_ifs"
+
+ # Restore the uninstalled library and exit
+ if test "$opt_mode" = relink; then
+ $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $?
+
+ if test -n "$convenience"; then
+ if test -z "$whole_archive_flag_spec"; then
+ func_show_eval '${RM}r "$gentop"'
+ fi
+ fi
+
+ exit $EXIT_SUCCESS
+ fi
+
+ # Create links to the real library.
+ for linkname in $linknames; do
+ if test "$realname" != "$linkname"; then
+ func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?'
+ fi
+ done
+
+ # If -module or -export-dynamic was specified, set the dlname.
+ if test "$module" = yes || test "$export_dynamic" = yes; then
+ # On all known operating systems, these are identical.
+ dlname="$soname"
+ fi
+ fi
+ ;;
+
+ obj)
+ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+ func_warning "\`-dlopen' is ignored for objects"
+ fi
+
+ case " $deplibs" in
+ *\ -l* | *\ -L*)
+ func_warning "\`-l' and \`-L' are ignored for objects" ;;
+ esac
+
+ test -n "$rpath" && \
+ func_warning "\`-rpath' is ignored for objects"
+
+ test -n "$xrpath" && \
+ func_warning "\`-R' is ignored for objects"
+
+ test -n "$vinfo" && \
+ func_warning "\`-version-info' is ignored for objects"
+
+ test -n "$release" && \
+ func_warning "\`-release' is ignored for objects"
+
+ case $output in
+ *.lo)
+ test -n "$objs$old_deplibs" && \
+ func_fatal_error "cannot build library object \`$output' from non-libtool objects"
+
+ libobj=$output
+ func_lo2o "$libobj"
+ obj=$func_lo2o_result
+ ;;
+ *)
+ libobj=
+ obj="$output"
+ ;;
+ esac
+
+ # Delete the old objects.
+ $opt_dry_run || $RM $obj $libobj
+
+ # Objects from convenience libraries. This assumes
+ # single-version convenience libraries. Whenever we create
+ # different ones for PIC/non-PIC, this we'll have to duplicate
+ # the extraction.
+ reload_conv_objs=
+ gentop=
+ # reload_cmds runs $LD directly, so let us get rid of
+ # -Wl from whole_archive_flag_spec and hope we can get by with
+ # turning comma into space..
+ wl=
+
+ if test -n "$convenience"; then
+ if test -n "$whole_archive_flag_spec"; then
+ eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
+ reload_conv_objs=$reload_objs\ `$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'`
+ else
+ gentop="$output_objdir/${obj}x"
+ func_append generated " $gentop"
+
+ func_extract_archives $gentop $convenience
+ reload_conv_objs="$reload_objs $func_extract_archives_result"
+ fi
+ fi
+
+ # If we're not building shared, we need to use non_pic_objs
+ test "$build_libtool_libs" != yes && libobjs="$non_pic_objects"
+
+ # Create the old-style object.
+ reload_objs="$objs$old_deplibs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; /\.lib$/d; $lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
+
+ output="$obj"
+ func_execute_cmds "$reload_cmds" 'exit $?'
+
+ # Exit if we aren't doing a library object file.
+ if test -z "$libobj"; then
+ if test -n "$gentop"; then
+ func_show_eval '${RM}r "$gentop"'
+ fi
+
+ exit $EXIT_SUCCESS
+ fi
+
+ if test "$build_libtool_libs" != yes; then
+ if test -n "$gentop"; then
+ func_show_eval '${RM}r "$gentop"'
+ fi
+
+ # Create an invalid libtool object if no PIC, so that we don't
+ # accidentally link it into a program.
+ # $show "echo timestamp > $libobj"
+ # $opt_dry_run || eval "echo timestamp > $libobj" || exit $?
+ exit $EXIT_SUCCESS
+ fi
+
+ if test -n "$pic_flag" || test "$pic_mode" != default; then
+ # Only do commands if we really have different PIC objects.
+ reload_objs="$libobjs $reload_conv_objs"
+ output="$libobj"
+ func_execute_cmds "$reload_cmds" 'exit $?'
+ fi
+
+ if test -n "$gentop"; then
+ func_show_eval '${RM}r "$gentop"'
+ fi
+
+ exit $EXIT_SUCCESS
+ ;;
+
+ prog)
+ case $host in
+ *cygwin*) func_stripname '' '.exe' "$output"
+ output=$func_stripname_result.exe;;
+ esac
+ test -n "$vinfo" && \
+ func_warning "\`-version-info' is ignored for programs"
+
+ test -n "$release" && \
+ func_warning "\`-release' is ignored for programs"
+
+ test "$preload" = yes \
+ && test "$dlopen_support" = unknown \
+ && test "$dlopen_self" = unknown \
+ && test "$dlopen_self_static" = unknown && \
+ func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support."
+
+ case $host in
+ *-*-rhapsody* | *-*-darwin1.[012])
+ # On Rhapsody replace the C library is the System framework
+ compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's/ -lc / System.ltframework /'`
+ finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's/ -lc / System.ltframework /'`
+ ;;
+ esac
+
+ case $host in
+ *-*-darwin*)
+ # Don't allow lazy linking, it breaks C++ global constructors
+ # But is supposedly fixed on 10.4 or later (yay!).
+ if test "$tagname" = CXX ; then
+ case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
+ 10.[0123])
+ func_append compile_command " ${wl}-bind_at_load"
+ func_append finalize_command " ${wl}-bind_at_load"
+ ;;
+ esac
+ fi
+ # Time to change all our "foo.ltframework" stuff back to "-framework foo"
+ compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+ finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+ ;;
+ esac
+
+
+ # move library search paths that coincide with paths to not yet
+ # installed libraries to the beginning of the library search list
+ new_libs=
+ for path in $notinst_path; do
+ case " $new_libs " in
+ *" -L$path/$objdir "*) ;;
+ *)
+ case " $compile_deplibs " in
+ *" -L$path/$objdir "*)
+ func_append new_libs " -L$path/$objdir" ;;
+ esac
+ ;;
+ esac
+ done
+ for deplib in $compile_deplibs; do
+ case $deplib in
+ -L*)
+ case " $new_libs " in
+ *" $deplib "*) ;;
+ *) func_append new_libs " $deplib" ;;
+ esac
+ ;;
+ *) func_append new_libs " $deplib" ;;
+ esac
+ done
+ compile_deplibs="$new_libs"
+
+
+ func_append compile_command " $compile_deplibs"
+ func_append finalize_command " $finalize_deplibs"
+
+ if test -n "$rpath$xrpath"; then
+ # If the user specified any rpath flags, then add them.
+ for libdir in $rpath $xrpath; do
+ # This is the magic to use -rpath.
+ case "$finalize_rpath " in
+ *" $libdir "*) ;;
+ *) func_append finalize_rpath " $libdir" ;;
+ esac
+ done
+ fi
+
+ # Now hardcode the library paths
+ rpath=
+ hardcode_libdirs=
+ for libdir in $compile_rpath $finalize_rpath; do
+ if test -n "$hardcode_libdir_flag_spec"; then
+ if test -n "$hardcode_libdir_separator"; then
+ if test -z "$hardcode_libdirs"; then
+ hardcode_libdirs="$libdir"
+ else
+ # Just accumulate the unique libdirs.
+ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+ ;;
+ *)
+ func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
+ ;;
+ esac
+ fi
+ else
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ func_append rpath " $flag"
+ fi
+ elif test -n "$runpath_var"; then
+ case "$perm_rpath " in
+ *" $libdir "*) ;;
+ *) func_append perm_rpath " $libdir" ;;
+ esac
+ fi
+ case $host in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
+ testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'`
+ case :$dllsearchpath: in
+ *":$libdir:"*) ;;
+ ::) dllsearchpath=$libdir;;
+ *) func_append dllsearchpath ":$libdir";;
+ esac
+ case :$dllsearchpath: in
+ *":$testbindir:"*) ;;
+ ::) dllsearchpath=$testbindir;;
+ *) func_append dllsearchpath ":$testbindir";;
+ esac
+ ;;
+ esac
+ done
+ # Substitute the hardcoded libdirs into the rpath.
+ if test -n "$hardcode_libdir_separator" &&
+ test -n "$hardcode_libdirs"; then
+ libdir="$hardcode_libdirs"
+ eval rpath=\" $hardcode_libdir_flag_spec\"
+ fi
+ compile_rpath="$rpath"
+
+ rpath=
+ hardcode_libdirs=
+ for libdir in $finalize_rpath; do
+ if test -n "$hardcode_libdir_flag_spec"; then
+ if test -n "$hardcode_libdir_separator"; then
+ if test -z "$hardcode_libdirs"; then
+ hardcode_libdirs="$libdir"
+ else
+ # Just accumulate the unique libdirs.
+ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+ ;;
+ *)
+ func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
+ ;;
+ esac
+ fi
+ else
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ func_append rpath " $flag"
+ fi
+ elif test -n "$runpath_var"; then
+ case "$finalize_perm_rpath " in
+ *" $libdir "*) ;;
+ *) func_append finalize_perm_rpath " $libdir" ;;
+ esac
+ fi
+ done
+ # Substitute the hardcoded libdirs into the rpath.
+ if test -n "$hardcode_libdir_separator" &&
+ test -n "$hardcode_libdirs"; then
+ libdir="$hardcode_libdirs"
+ eval rpath=\" $hardcode_libdir_flag_spec\"
+ fi
+ finalize_rpath="$rpath"
+
+ if test -n "$libobjs" && test "$build_old_libs" = yes; then
+ # Transform all the library objects into standard objects.
+ compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
+ finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
+ fi
+
+ func_generate_dlsyms "$outputname" "@PROGRAM@" "no"
+
+ # template prelinking step
+ if test -n "$prelink_cmds"; then
+ func_execute_cmds "$prelink_cmds" 'exit $?'
+ fi
+
+ wrappers_required=yes
+ case $host in
+ *cegcc* | *mingw32ce*)
+ # Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway.
+ wrappers_required=no
+ ;;
+ *cygwin* | *mingw* )
+ if test "$build_libtool_libs" != yes; then
+ wrappers_required=no
+ fi
+ ;;
+ *)
+ if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
+ wrappers_required=no
+ fi
+ ;;
+ esac
+ if test "$wrappers_required" = no; then
+ # Replace the output file specification.
+ compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
+ link_command="$compile_command$compile_rpath"
+
+ # We have no uninstalled library dependencies, so finalize right now.
+ exit_status=0
+ func_show_eval "$link_command" 'exit_status=$?'
+
+ if test -n "$postlink_cmds"; then
+ func_to_tool_file "$output"
+ postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
+ func_execute_cmds "$postlink_cmds" 'exit $?'
+ fi
+
+ # Delete the generated files.
+ if test -f "$output_objdir/${outputname}S.${objext}"; then
+ func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"'
+ fi
+
+ exit $exit_status
+ fi
+
+ if test -n "$compile_shlibpath$finalize_shlibpath"; then
+ compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
+ fi
+ if test -n "$finalize_shlibpath"; then
+ finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
+ fi
+
+ compile_var=
+ finalize_var=
+ if test -n "$runpath_var"; then
+ if test -n "$perm_rpath"; then
+ # We should set the runpath_var.
+ rpath=
+ for dir in $perm_rpath; do
+ func_append rpath "$dir:"
+ done
+ compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
+ fi
+ if test -n "$finalize_perm_rpath"; then
+ # We should set the runpath_var.
+ rpath=
+ for dir in $finalize_perm_rpath; do
+ func_append rpath "$dir:"
+ done
+ finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
+ fi
+ fi
+
+ if test "$no_install" = yes; then
+ # We don't need to create a wrapper script.
+ link_command="$compile_var$compile_command$compile_rpath"
+ # Replace the output file specification.
+ link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
+ # Delete the old output file.
+ $opt_dry_run || $RM $output
+ # Link the executable and exit
+ func_show_eval "$link_command" 'exit $?'
+
+ if test -n "$postlink_cmds"; then
+ func_to_tool_file "$output"
+ postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
+ func_execute_cmds "$postlink_cmds" 'exit $?'
+ fi
+
+ exit $EXIT_SUCCESS
+ fi
+
+ if test "$hardcode_action" = relink; then
+ # Fast installation is not supported
+ link_command="$compile_var$compile_command$compile_rpath"
+ relink_command="$finalize_var$finalize_command$finalize_rpath"
+
+ func_warning "this platform does not like uninstalled shared libraries"
+ func_warning "\`$output' will be relinked during installation"
+ else
+ if test "$fast_install" != no; then
+ link_command="$finalize_var$compile_command$finalize_rpath"
+ if test "$fast_install" = yes; then
+ relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'`
+ else
+ # fast_install is set to needless
+ relink_command=
+ fi
+ else
+ link_command="$compile_var$compile_command$compile_rpath"
+ relink_command="$finalize_var$finalize_command$finalize_rpath"
+ fi
+ fi
+
+ # Replace the output file specification.
+ link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
+
+ # Delete the old output files.
+ $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname
+
+ func_show_eval "$link_command" 'exit $?'
+
+ if test -n "$postlink_cmds"; then
+ func_to_tool_file "$output_objdir/$outputname"
+ postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
+ func_execute_cmds "$postlink_cmds" 'exit $?'
+ fi
+
+ # Now create the wrapper script.
+ func_verbose "creating $output"
+
+ # Quote the relink command for shipping.
+ if test -n "$relink_command"; then
+ # Preserve any variables that may affect compiler behavior
+ for var in $variables_saved_for_relink; do
+ if eval test -z \"\${$var+set}\"; then
+ relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
+ elif eval var_value=\$$var; test -z "$var_value"; then
+ relink_command="$var=; export $var; $relink_command"
+ else
+ func_quote_for_eval "$var_value"
+ relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
+ fi
+ done
+ relink_command="(cd `pwd`; $relink_command)"
+ relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
+ fi
+
+ # Only actually do things if not in dry run mode.
+ $opt_dry_run || {
+ # win32 will think the script is a binary if it has
+ # a .exe suffix, so we strip it off here.
+ case $output in
+ *.exe) func_stripname '' '.exe' "$output"
+ output=$func_stripname_result ;;
+ esac
+ # test for cygwin because mv fails w/o .exe extensions
+ case $host in
+ *cygwin*)
+ exeext=.exe
+ func_stripname '' '.exe' "$outputname"
+ outputname=$func_stripname_result ;;
+ *) exeext= ;;
+ esac
+ case $host in
+ *cygwin* | *mingw* )
+ func_dirname_and_basename "$output" "" "."
+ output_name=$func_basename_result
+ output_path=$func_dirname_result
+ cwrappersource="$output_path/$objdir/lt-$output_name.c"
+ cwrapper="$output_path/$output_name.exe"
+ $RM $cwrappersource $cwrapper
+ trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
+
+ func_emit_cwrapperexe_src > $cwrappersource
+
+ # The wrapper executable is built using the $host compiler,
+ # because it contains $host paths and files. If cross-
+ # compiling, it, like the target executable, must be
+ # executed on the $host or under an emulation environment.
+ $opt_dry_run || {
+ $LTCC $LTCFLAGS -o $cwrapper $cwrappersource
+ $STRIP $cwrapper
+ }
+
+ # Now, create the wrapper script for func_source use:
+ func_ltwrapper_scriptname $cwrapper
+ $RM $func_ltwrapper_scriptname_result
+ trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15
+ $opt_dry_run || {
+ # note: this script will not be executed, so do not chmod.
+ if test "x$build" = "x$host" ; then
+ $cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result
+ else
+ func_emit_wrapper no > $func_ltwrapper_scriptname_result
+ fi
+ }
+ ;;
+ * )
+ $RM $output
+ trap "$RM $output; exit $EXIT_FAILURE" 1 2 15
+
+ func_emit_wrapper no > $output
+ chmod +x $output
+ ;;
+ esac
+ }
+ exit $EXIT_SUCCESS
+ ;;
+ esac
+
+ # See if we need to build an old-fashioned archive.
+ for oldlib in $oldlibs; do
+
+ if test "$build_libtool_libs" = convenience; then
+ oldobjs="$libobjs_save $symfileobj"
+ addlibs="$convenience"
+ build_libtool_libs=no
+ else
+ if test "$build_libtool_libs" = module; then
+ oldobjs="$libobjs_save"
+ build_libtool_libs=no
+ else
+ oldobjs="$old_deplibs $non_pic_objects"
+ if test "$preload" = yes && test -f "$symfileobj"; then
+ func_append oldobjs " $symfileobj"
+ fi
+ fi
+ addlibs="$old_convenience"
+ fi
+
+ if test -n "$addlibs"; then
+ gentop="$output_objdir/${outputname}x"
+ func_append generated " $gentop"
+
+ func_extract_archives $gentop $addlibs
+ func_append oldobjs " $func_extract_archives_result"
+ fi
+
+ # Do each command in the archive commands.
+ if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
+ cmds=$old_archive_from_new_cmds
+ else
+
+ # Add any objects from preloaded convenience libraries
+ if test -n "$dlprefiles"; then
+ gentop="$output_objdir/${outputname}x"
+ func_append generated " $gentop"
+
+ func_extract_archives $gentop $dlprefiles
+ func_append oldobjs " $func_extract_archives_result"
+ fi
+
+ # POSIX demands no paths to be encoded in archives. We have
+ # to avoid creating archives with duplicate basenames if we
+ # might have to extract them afterwards, e.g., when creating a
+ # static archive out of a convenience library, or when linking
+ # the entirety of a libtool archive into another (currently
+ # not supported by libtool).
+ if (for obj in $oldobjs
+ do
+ func_basename "$obj"
+ $ECHO "$func_basename_result"
+ done | sort | sort -uc >/dev/null 2>&1); then
+ :
+ else
+ echo "copying selected object files to avoid basename conflicts..."
+ gentop="$output_objdir/${outputname}x"
+ func_append generated " $gentop"
+ func_mkdir_p "$gentop"
+ save_oldobjs=$oldobjs
+ oldobjs=
+ counter=1
+ for obj in $save_oldobjs
+ do
+ func_basename "$obj"
+ objbase="$func_basename_result"
+ case " $oldobjs " in
+ " ") oldobjs=$obj ;;
+ *[\ /]"$objbase "*)
+ while :; do
+ # Make sure we don't pick an alternate name that also
+ # overlaps.
+ newobj=lt$counter-$objbase
+ func_arith $counter + 1
+ counter=$func_arith_result
+ case " $oldobjs " in
+ *[\ /]"$newobj "*) ;;
+ *) if test ! -f "$gentop/$newobj"; then break; fi ;;
+ esac
+ done
+ func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
+ func_append oldobjs " $gentop/$newobj"
+ ;;
+ *) func_append oldobjs " $obj" ;;
+ esac
+ done
+ fi
+ func_to_tool_file "$oldlib" func_convert_file_msys_to_w32
+ tool_oldlib=$func_to_tool_file_result
+ eval cmds=\"$old_archive_cmds\"
+
+ func_len " $cmds"
+ len=$func_len_result
+ if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+ cmds=$old_archive_cmds
+ elif test -n "$archiver_list_spec"; then
+ func_verbose "using command file archive linking..."
+ for obj in $oldobjs
+ do
+ func_to_tool_file "$obj"
+ $ECHO "$func_to_tool_file_result"
+ done > $output_objdir/$libname.libcmd
+ func_to_tool_file "$output_objdir/$libname.libcmd"
+ oldobjs=" $archiver_list_spec$func_to_tool_file_result"
+ cmds=$old_archive_cmds
+ else
+ # the command line is too long to link in one step, link in parts
+ func_verbose "using piecewise archive linking..."
+ save_RANLIB=$RANLIB
+ RANLIB=:
+ objlist=
+ concat_cmds=
+ save_oldobjs=$oldobjs
+ oldobjs=
+ # Is there a better way of finding the last object in the list?
+ for obj in $save_oldobjs
+ do
+ last_oldobj=$obj
+ done
+ eval test_cmds=\"$old_archive_cmds\"
+ func_len " $test_cmds"
+ len0=$func_len_result
+ len=$len0
+ for obj in $save_oldobjs
+ do
+ func_len " $obj"
+ func_arith $len + $func_len_result
+ len=$func_arith_result
+ func_append objlist " $obj"
+ if test "$len" -lt "$max_cmd_len"; then
+ :
+ else
+ # the above command should be used before it gets too long
+ oldobjs=$objlist
+ if test "$obj" = "$last_oldobj" ; then
+ RANLIB=$save_RANLIB
+ fi
+ test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+ eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
+ objlist=
+ len=$len0
+ fi
+ done
+ RANLIB=$save_RANLIB
+ oldobjs=$objlist
+ if test "X$oldobjs" = "X" ; then
+ eval cmds=\"\$concat_cmds\"
+ else
+ eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
+ fi
+ fi
+ fi
+ func_execute_cmds "$cmds" 'exit $?'
+ done
+
+ test -n "$generated" && \
+ func_show_eval "${RM}r$generated"
+
+ # Now create the libtool archive.
+ case $output in
+ *.la)
+ old_library=
+ test "$build_old_libs" = yes && old_library="$libname.$libext"
+ func_verbose "creating $output"
+
+ # Preserve any variables that may affect compiler behavior
+ for var in $variables_saved_for_relink; do
+ if eval test -z \"\${$var+set}\"; then
+ relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
+ elif eval var_value=\$$var; test -z "$var_value"; then
+ relink_command="$var=; export $var; $relink_command"
+ else
+ func_quote_for_eval "$var_value"
+ relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
+ fi
+ done
+ # Quote the link command for shipping.
+ relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
+ relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
+ if test "$hardcode_automatic" = yes ; then
+ relink_command=
+ fi
+
+ # Only create the output if not a dry run.
+ $opt_dry_run || {
+ for installed in no yes; do
+ if test "$installed" = yes; then
+ if test -z "$install_libdir"; then
+ break
+ fi
+ output="$output_objdir/$outputname"i
+ # Replace all uninstalled libtool libraries with the installed ones
+ newdependency_libs=
+ for deplib in $dependency_libs; do
+ case $deplib in
+ *.la)
+ func_basename "$deplib"
+ name="$func_basename_result"
+ func_resolve_sysroot "$deplib"
+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result`
+ test -z "$libdir" && \
+ func_fatal_error "\`$deplib' is not a valid libtool archive"
+ func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name"
+ ;;
+ -L*)
+ func_stripname -L '' "$deplib"
+ func_replace_sysroot "$func_stripname_result"
+ func_append newdependency_libs " -L$func_replace_sysroot_result"
+ ;;
+ -R*)
+ func_stripname -R '' "$deplib"
+ func_replace_sysroot "$func_stripname_result"
+ func_append newdependency_libs " -R$func_replace_sysroot_result"
+ ;;
+ *) func_append newdependency_libs " $deplib" ;;
+ esac
+ done
+ dependency_libs="$newdependency_libs"
+ newdlfiles=
+
+ for lib in $dlfiles; do
+ case $lib in
+ *.la)
+ func_basename "$lib"
+ name="$func_basename_result"
+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+ test -z "$libdir" && \
+ func_fatal_error "\`$lib' is not a valid libtool archive"
+ func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name"
+ ;;
+ *) func_append newdlfiles " $lib" ;;
+ esac
+ done
+ dlfiles="$newdlfiles"
+ newdlprefiles=
+ for lib in $dlprefiles; do
+ case $lib in
+ *.la)
+ # Only pass preopened files to the pseudo-archive (for
+ # eventual linking with the app. that links it) if we
+ # didn't already link the preopened objects directly into
+ # the library:
+ func_basename "$lib"
+ name="$func_basename_result"
+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+ test -z "$libdir" && \
+ func_fatal_error "\`$lib' is not a valid libtool archive"
+ func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name"
+ ;;
+ esac
+ done
+ dlprefiles="$newdlprefiles"
+ else
+ newdlfiles=
+ for lib in $dlfiles; do
+ case $lib in
+ [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
+ *) abs=`pwd`"/$lib" ;;
+ esac
+ func_append newdlfiles " $abs"
+ done
+ dlfiles="$newdlfiles"
+ newdlprefiles=
+ for lib in $dlprefiles; do
+ case $lib in
+ [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
+ *) abs=`pwd`"/$lib" ;;
+ esac
+ func_append newdlprefiles " $abs"
+ done
+ dlprefiles="$newdlprefiles"
+ fi
+ $RM $output
+ # place dlname in correct position for cygwin
+ # In fact, it would be nice if we could use this code for all target
+ # systems that can't hard-code library paths into their executables
+ # and that have no shared library path variable independent of PATH,
+ # but it turns out we can't easily determine that from inspecting
+ # libtool variables, so we have to hard-code the OSs to which it
+ # applies here; at the moment, that means platforms that use the PE
+ # object format with DLL files. See the long comment at the top of
+ # tests/bindir.at for full details.
+ tdlname=$dlname
+ case $host,$output,$installed,$module,$dlname in
+ *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll)
+ # If a -bindir argument was supplied, place the dll there.
+ if test "x$bindir" != x ;
+ then
+ func_relative_path "$install_libdir" "$bindir"
+ tdlname=$func_relative_path_result$dlname
+ else
+ # Otherwise fall back on heuristic.
+ tdlname=../bin/$dlname
+ fi
+ ;;
+ esac
+ $ECHO > $output "\
+# $outputname - a libtool library file
+# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+
+# The name that we can dlopen(3).
+dlname='$tdlname'
+
+# Names of this library.
+library_names='$library_names'
+
+# The name of the static archive.
+old_library='$old_library'
+
+# Linker flags that can not go in dependency_libs.
+inherited_linker_flags='$new_inherited_linker_flags'
+
+# Libraries that this one depends upon.
+dependency_libs='$dependency_libs'
+
+# Names of additional weak libraries provided by this library
+weak_library_names='$weak_libs'
+
+# Version information for $libname.
+current=$current
+age=$age
+revision=$revision
+
+# Is this an already installed library?
+installed=$installed
+
+# Should we warn about portability when linking against -modules?
+shouldnotlink=$module
+
+# Files to dlopen/dlpreopen
+dlopen='$dlfiles'
+dlpreopen='$dlprefiles'
+
+# Directory that this library needs to be installed in:
+libdir='$install_libdir'"
+ if test "$installed" = no && test "$need_relink" = yes; then
+ $ECHO >> $output "\
+relink_command=\"$relink_command\""
+ fi
+ done
+ }
+
+ # Do a symbolic link so that the libtool archive can be found in
+ # LD_LIBRARY_PATH before the program is installed.
+ func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?'
+ ;;
+ esac
+ exit $EXIT_SUCCESS
+}
+
+{ test "$opt_mode" = link || test "$opt_mode" = relink; } &&
+ func_mode_link ${1+"$@"}
+
+
+# func_mode_uninstall arg...
+func_mode_uninstall ()
+{
+ $opt_debug
+ RM="$nonopt"
+ files=
+ rmforce=
+ exit_status=0
+
+ # This variable tells wrapper scripts just to set variables rather
+ # than running their programs.
+ libtool_install_magic="$magic"
+
+ for arg
+ do
+ case $arg in
+ -f) func_append RM " $arg"; rmforce=yes ;;
+ -*) func_append RM " $arg" ;;
+ *) func_append files " $arg" ;;
+ esac
+ done
+
+ test -z "$RM" && \
+ func_fatal_help "you must specify an RM program"
+
+ rmdirs=
+
+ for file in $files; do
+ func_dirname "$file" "" "."
+ dir="$func_dirname_result"
+ if test "X$dir" = X.; then
+ odir="$objdir"
+ else
+ odir="$dir/$objdir"
+ fi
+ func_basename "$file"
+ name="$func_basename_result"
+ test "$opt_mode" = uninstall && odir="$dir"
+
+ # Remember odir for removal later, being careful to avoid duplicates
+ if test "$opt_mode" = clean; then
+ case " $rmdirs " in
+ *" $odir "*) ;;
+ *) func_append rmdirs " $odir" ;;
+ esac
+ fi
+
+ # Don't error if the file doesn't exist and rm -f was used.
+ if { test -L "$file"; } >/dev/null 2>&1 ||
+ { test -h "$file"; } >/dev/null 2>&1 ||
+ test -f "$file"; then
+ :
+ elif test -d "$file"; then
+ exit_status=1
+ continue
+ elif test "$rmforce" = yes; then
+ continue
+ fi
+
+ rmfiles="$file"
+
+ case $name in
+ *.la)
+ # Possibly a libtool archive, so verify it.
+ if func_lalib_p "$file"; then
+ func_source $dir/$name
+
+ # Delete the libtool libraries and symlinks.
+ for n in $library_names; do
+ func_append rmfiles " $odir/$n"
+ done
+ test -n "$old_library" && func_append rmfiles " $odir/$old_library"
+
+ case "$opt_mode" in
+ clean)
+ case " $library_names " in
+ *" $dlname "*) ;;
+ *) test -n "$dlname" && func_append rmfiles " $odir/$dlname" ;;
+ esac
+ test -n "$libdir" && func_append rmfiles " $odir/$name $odir/${name}i"
+ ;;
+ uninstall)
+ if test -n "$library_names"; then
+ # Do each command in the postuninstall commands.
+ func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
+ fi
+
+ if test -n "$old_library"; then
+ # Do each command in the old_postuninstall commands.
+ func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
+ fi
+ # FIXME: should reinstall the best remaining shared library.
+ ;;
+ esac
+ fi
+ ;;
+
+ *.lo)
+ # Possibly a libtool object, so verify it.
+ if func_lalib_p "$file"; then
+
+ # Read the .lo file
+ func_source $dir/$name
+
+ # Add PIC object to the list of files to remove.
+ if test -n "$pic_object" &&
+ test "$pic_object" != none; then
+ func_append rmfiles " $dir/$pic_object"
+ fi
+
+ # Add non-PIC object to the list of files to remove.
+ if test -n "$non_pic_object" &&
+ test "$non_pic_object" != none; then
+ func_append rmfiles " $dir/$non_pic_object"
+ fi
+ fi
+ ;;
+
+ *)
+ if test "$opt_mode" = clean ; then
+ noexename=$name
+ case $file in
+ *.exe)
+ func_stripname '' '.exe' "$file"
+ file=$func_stripname_result
+ func_stripname '' '.exe' "$name"
+ noexename=$func_stripname_result
+ # $file with .exe has already been added to rmfiles,
+ # add $file without .exe
+ func_append rmfiles " $file"
+ ;;
+ esac
+ # Do a test to see if this is a libtool program.
+ if func_ltwrapper_p "$file"; then
+ if func_ltwrapper_executable_p "$file"; then
+ func_ltwrapper_scriptname "$file"
+ relink_command=
+ func_source $func_ltwrapper_scriptname_result
+ func_append rmfiles " $func_ltwrapper_scriptname_result"
+ else
+ relink_command=
+ func_source $dir/$noexename
+ fi
+
+ # note $name still contains .exe if it was in $file originally
+ # as does the version of $file that was added into $rmfiles
+ func_append rmfiles " $odir/$name $odir/${name}S.${objext}"
+ if test "$fast_install" = yes && test -n "$relink_command"; then
+ func_append rmfiles " $odir/lt-$name"
+ fi
+ if test "X$noexename" != "X$name" ; then
+ func_append rmfiles " $odir/lt-${noexename}.c"
+ fi
+ fi
+ fi
+ ;;
+ esac
+ func_show_eval "$RM $rmfiles" 'exit_status=1'
+ done
+
+ # Try to remove the ${objdir}s in the directories where we deleted files
+ for dir in $rmdirs; do
+ if test -d "$dir"; then
+ func_show_eval "rmdir $dir >/dev/null 2>&1"
+ fi
+ done
+
+ exit $exit_status
+}
+
+{ test "$opt_mode" = uninstall || test "$opt_mode" = clean; } &&
+ func_mode_uninstall ${1+"$@"}
+
+test -z "$opt_mode" && {
+ help="$generic_help"
+ func_fatal_help "you must specify a MODE"
+}
+
+test -z "$exec_cmd" && \
+ func_fatal_help "invalid operation mode \`$opt_mode'"
+
+if test -n "$exec_cmd"; then
+ eval exec "$exec_cmd"
+ exit $EXIT_FAILURE
+fi
+
+exit $exit_status
+
+
+# The TAGs below are defined such that we never get into a situation
+# in which we disable both kinds of libraries. Given conflicting
+# choices, we go for a static library, that is the most portable,
+# since we can't tell whether shared libraries were disabled because
+# the user asked for that or because the platform doesn't support
+# them. This is particularly important on AIX, because we don't
+# support having both static and shared libraries enabled at the same
+# time on that platform, so we default to a shared-only configuration.
+# If a disable-shared tag is given, we'll fallback to a static-only
+# configuration. But we'll never go from static-only to shared-only.
+
+# ### BEGIN LIBTOOL TAG CONFIG: disable-shared
+build_libtool_libs=no
+build_old_libs=yes
+# ### END LIBTOOL TAG CONFIG: disable-shared
+
+# ### BEGIN LIBTOOL TAG CONFIG: disable-static
+build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
+# ### END LIBTOOL TAG CONFIG: disable-static
+
+# Local Variables:
+# mode:shell-script
+# sh-indentation:2
+# End:
+# vi:sw=2
+
Copied: vendor/openbsm/1.2_alpha4/config/ylwrap (from rev 11163, vendor/openbsm/dist/config/ylwrap)
===================================================================
--- vendor/openbsm/1.2_alpha4/config/ylwrap (rev 0)
+++ vendor/openbsm/1.2_alpha4/config/ylwrap 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,232 @@
+#! /bin/sh
+# ylwrap - wrapper for lex/yacc invocations.
+
+scriptversion=2011-08-25.18; # UTC
+
+# Copyright (C) 1996-2012 Free Software Foundation, Inc.
+#
+# Written by Tom Tromey <tromey at cygnus.com>.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# This file is maintained in Automake, please report
+# bugs to <bug-automake at gnu.org> or send patches to
+# <automake-patches at gnu.org>.
+
+case "$1" in
+ '')
+ echo "$0: No files given. Try '$0 --help' for more information." 1>&2
+ exit 1
+ ;;
+ --basedir)
+ basedir=$2
+ shift 2
+ ;;
+ -h|--h*)
+ cat <<\EOF
+Usage: ylwrap [--help|--version] INPUT [OUTPUT DESIRED]... -- PROGRAM [ARGS]...
+
+Wrapper for lex/yacc invocations, renaming files as desired.
+
+ INPUT is the input file
+ OUTPUT is one file PROG generates
+ DESIRED is the file we actually want instead of OUTPUT
+ PROGRAM is program to run
+ ARGS are passed to PROG
+
+Any number of OUTPUT,DESIRED pairs may be used.
+
+Report bugs to <bug-automake at gnu.org>.
+EOF
+ exit $?
+ ;;
+ -v|--v*)
+ echo "ylwrap $scriptversion"
+ exit $?
+ ;;
+esac
+
+get_dirname ()
+{
+ case $1 in
+ */*|*\\*) printf '%s\n' "$1" | sed -e 's,\([\\/]\)[^\\/]*$,\1,';;
+ # Otherwise, we want the empty string (not ".").
+ esac
+}
+
+quote_for_sed ()
+{
+ # FIXME: really we should care about more than '.' and '\'.
+ sed -e 's,[\\.],\\&,g'
+}
+
+# The input.
+input="$1"
+shift
+# We'll later need for a correct munging of "#line" directives.
+input_sub_rx=`get_dirname "$input" | quote_for_sed`
+case "$input" in
+ [\\/]* | ?:[\\/]*)
+ # Absolute path; do nothing.
+ ;;
+ *)
+ # Relative path. Make it absolute.
+ input="`pwd`/$input"
+ ;;
+esac
+
+pairlist=
+while test "$#" -ne 0; do
+ if test "$1" = "--"; then
+ shift
+ break
+ fi
+ pairlist="$pairlist $1"
+ shift
+done
+
+# The program to run.
+prog="$1"
+shift
+# Make any relative path in $prog absolute.
+case "$prog" in
+ [\\/]* | ?:[\\/]*) ;;
+ *[\\/]*) prog="`pwd`/$prog" ;;
+esac
+
+# FIXME: add hostname here for parallel makes that run commands on
+# other machines. But that might take us over the 14-char limit.
+dirname=ylwrap$$
+do_exit="cd '`pwd`' && rm -rf $dirname > /dev/null 2>&1;"' (exit $ret); exit $ret'
+trap "ret=129; $do_exit" 1
+trap "ret=130; $do_exit" 2
+trap "ret=141; $do_exit" 13
+trap "ret=143; $do_exit" 15
+mkdir $dirname || exit 1
+
+cd $dirname
+
+case $# in
+ 0) "$prog" "$input" ;;
+ *) "$prog" "$@" "$input" ;;
+esac
+ret=$?
+
+if test $ret -eq 0; then
+ set X $pairlist
+ shift
+ first=yes
+ # Since DOS filename conventions don't allow two dots,
+ # the DOS version of Bison writes out y_tab.c instead of y.tab.c
+ # and y_tab.h instead of y.tab.h. Test to see if this is the case.
+ y_tab_nodot="no"
+ if test -f y_tab.c || test -f y_tab.h; then
+ y_tab_nodot="yes"
+ fi
+
+ input_rx=`get_dirname "$input" | quote_for_sed`
+
+ while test "$#" -ne 0; do
+ from="$1"
+ # Handle y_tab.c and y_tab.h output by DOS
+ if test $y_tab_nodot = "yes"; then
+ if test $from = "y.tab.c"; then
+ from="y_tab.c"
+ else
+ if test $from = "y.tab.h"; then
+ from="y_tab.h"
+ fi
+ fi
+ fi
+ if test -f "$from"; then
+ # If $2 is an absolute path name, then just use that,
+ # otherwise prepend '../'.
+ case "$2" in
+ [\\/]* | ?:[\\/]*) target="$2";;
+ *) target="../$2";;
+ esac
+
+ # We do not want to overwrite a header file if it hasn't
+ # changed. This avoid useless recompilations. However the
+ # parser itself (the first file) should always be updated,
+ # because it is the destination of the .y.c rule in the
+ # Makefile. Divert the output of all other files to a temporary
+ # file so we can compare them to existing versions.
+ if test $first = no; then
+ realtarget="$target"
+ target="tmp-`echo $target | sed s/.*[\\/]//g`"
+ fi
+ # Munge "#line" or "#" directives.
+ # We don't want the resulting debug information to point at
+ # an absolute srcdir.
+ # We want to use the real output file name, not yy.lex.c for
+ # instance.
+ # We want the include guards to be adjusted too.
+ FROM=`echo "$from" | sed \
+ -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'\
+ -e 's/[^ABCDEFGHIJKLMNOPQRSTUVWXYZ]/_/g'`
+ TARGET=`echo "$2" | sed \
+ -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'\
+ -e 's/[^ABCDEFGHIJKLMNOPQRSTUVWXYZ]/_/g'`
+
+ sed -e "/^#/!b" -e "s,$input_rx,$input_sub_rx," -e "s,$from,$2," \
+ -e "s,$FROM,$TARGET," "$from" >"$target" || ret=$?
+
+ # Check whether header files must be updated.
+ if test $first = no; then
+ if test -f "$realtarget" && cmp -s "$realtarget" "$target"; then
+ echo "$2" is unchanged
+ rm -f "$target"
+ else
+ echo updating "$2"
+ mv -f "$target" "$realtarget"
+ fi
+ fi
+ else
+ # A missing file is only an error for the first file. This
+ # is a blatant hack to let us support using "yacc -d". If -d
+ # is not specified, we don't want an error when the header
+ # file is "missing".
+ if test $first = yes; then
+ ret=1
+ fi
+ fi
+ shift
+ shift
+ first=no
+ done
+else
+ ret=$?
+fi
+
+# Remove the directory.
+cd ..
+rm -rf $dirname
+
+exit $ret
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
Deleted: vendor/openbsm/1.2_alpha4/configure
===================================================================
--- vendor/openbsm/dist/configure 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/configure 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,24164 +0,0 @@
-#! /bin/sh
-# From configure.ac P4: //depot/projects/trustedbsd/openbsm/configure.ac#35 .
-# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.61 for OpenBSM 1.0.
-#
-# Report bugs to <trustedbsd-audit at TrustesdBSD.org>.
-#
-# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-# 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-## --------------------- ##
-## M4sh Initialization. ##
-## --------------------- ##
-
-# Be more Bourne compatible
-DUALCASE=1; export DUALCASE # for MKS sh
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
- emulate sh
- NULLCMD=:
- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
- setopt NO_GLOB_SUBST
-else
- case `(set -o) 2>/dev/null` in
- *posix*) set -o posix ;;
-esac
-
-fi
-
-
-
-
-# PATH needs CR
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- echo "#! /bin/sh" >conf$$.sh
- echo "exit 0" >>conf$$.sh
- chmod +x conf$$.sh
- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
- PATH_SEPARATOR=';'
- else
- PATH_SEPARATOR=:
- fi
- rm -f conf$$.sh
-fi
-
-# Support unset when possible.
-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
- as_unset=unset
-else
- as_unset=false
-fi
-
-
-# IFS
-# We need space, tab and new line, in precisely that order. Quoting is
-# there to prevent editors from complaining about space-tab.
-# (If _AS_PATH_WALK were called with IFS unset, it would disable word
-# splitting by setting IFS to empty value.)
-as_nl='
-'
-IFS=" "" $as_nl"
-
-# Find who we are. Look in the path if we contain no directory separator.
-case $0 in
- *[\\/]* ) as_myself=$0 ;;
- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
-IFS=$as_save_IFS
-
- ;;
-esac
-# We did not find ourselves, most probably we were run as `sh COMMAND'
-# in which case we are not to be found in the path.
-if test "x$as_myself" = x; then
- as_myself=$0
-fi
-if test ! -f "$as_myself"; then
- echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
- { (exit 1); exit 1; }
-fi
-
-# Work around bugs in pre-3.0 UWIN ksh.
-for as_var in ENV MAIL MAILPATH
-do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-done
-PS1='$ '
-PS2='> '
-PS4='+ '
-
-# NLS nuisances.
-for as_var in \
- LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
- LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
- LC_TELEPHONE LC_TIME
-do
- if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
- eval $as_var=C; export $as_var
- else
- ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
- fi
-done
-
-# Required to use basename.
-if expr a : '\(a\)' >/dev/null 2>&1 &&
- test "X`expr 00001 : '.*\(...\)'`" = X001; then
- as_expr=expr
-else
- as_expr=false
-fi
-
-if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
- as_basename=basename
-else
- as_basename=false
-fi
-
-
-# Name of the executable.
-as_me=`$as_basename -- "$0" ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
- X"$0" : 'X\(//\)$' \| \
- X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-echo X/"$0" |
- sed '/^.*\/\([^/][^/]*\)\/*$/{
- s//\1/
- q
- }
- /^X\/\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\/\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
-
-# CDPATH.
-$as_unset CDPATH
-
-
-if test "x$CONFIG_SHELL" = x; then
- if (eval ":") 2>/dev/null; then
- as_have_required=yes
-else
- as_have_required=no
-fi
-
- if test $as_have_required = yes && (eval ":
-(as_func_return () {
- (exit \$1)
-}
-as_func_success () {
- as_func_return 0
-}
-as_func_failure () {
- as_func_return 1
-}
-as_func_ret_success () {
- return 0
-}
-as_func_ret_failure () {
- return 1
-}
-
-exitcode=0
-if as_func_success; then
- :
-else
- exitcode=1
- echo as_func_success failed.
-fi
-
-if as_func_failure; then
- exitcode=1
- echo as_func_failure succeeded.
-fi
-
-if as_func_ret_success; then
- :
-else
- exitcode=1
- echo as_func_ret_success failed.
-fi
-
-if as_func_ret_failure; then
- exitcode=1
- echo as_func_ret_failure succeeded.
-fi
-
-if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
- :
-else
- exitcode=1
- echo positional parameters were not saved.
-fi
-
-test \$exitcode = 0) || { (exit 1); exit 1; }
-
-(
- as_lineno_1=\$LINENO
- as_lineno_2=\$LINENO
- test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" &&
- test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; }
-") 2> /dev/null; then
- :
-else
- as_candidate_shells=
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- case $as_dir in
- /*)
- for as_base in sh bash ksh sh5; do
- as_candidate_shells="$as_candidate_shells $as_dir/$as_base"
- done;;
- esac
-done
-IFS=$as_save_IFS
-
-
- for as_shell in $as_candidate_shells $SHELL; do
- # Try only shells that exist, to save several forks.
- if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
- { ("$as_shell") 2> /dev/null <<\_ASEOF
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
- emulate sh
- NULLCMD=:
- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
- setopt NO_GLOB_SUBST
-else
- case `(set -o) 2>/dev/null` in
- *posix*) set -o posix ;;
-esac
-
-fi
-
-
-:
-_ASEOF
-}; then
- CONFIG_SHELL=$as_shell
- as_have_required=yes
- if { "$as_shell" 2> /dev/null <<\_ASEOF
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
- emulate sh
- NULLCMD=:
- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
- setopt NO_GLOB_SUBST
-else
- case `(set -o) 2>/dev/null` in
- *posix*) set -o posix ;;
-esac
-
-fi
-
-
-:
-(as_func_return () {
- (exit $1)
-}
-as_func_success () {
- as_func_return 0
-}
-as_func_failure () {
- as_func_return 1
-}
-as_func_ret_success () {
- return 0
-}
-as_func_ret_failure () {
- return 1
-}
-
-exitcode=0
-if as_func_success; then
- :
-else
- exitcode=1
- echo as_func_success failed.
-fi
-
-if as_func_failure; then
- exitcode=1
- echo as_func_failure succeeded.
-fi
-
-if as_func_ret_success; then
- :
-else
- exitcode=1
- echo as_func_ret_success failed.
-fi
-
-if as_func_ret_failure; then
- exitcode=1
- echo as_func_ret_failure succeeded.
-fi
-
-if ( set x; as_func_ret_success y && test x = "$1" ); then
- :
-else
- exitcode=1
- echo positional parameters were not saved.
-fi
-
-test $exitcode = 0) || { (exit 1); exit 1; }
-
-(
- as_lineno_1=$LINENO
- as_lineno_2=$LINENO
- test "x$as_lineno_1" != "x$as_lineno_2" &&
- test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; }
-
-_ASEOF
-}; then
- break
-fi
-
-fi
-
- done
-
- if test "x$CONFIG_SHELL" != x; then
- for as_var in BASH_ENV ENV
- do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
- done
- export CONFIG_SHELL
- exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
-fi
-
-
- if test $as_have_required = no; then
- echo This script requires a shell more modern than all the
- echo shells that I found on your system. Please install a
- echo modern shell, or manually run the script under such a
- echo shell if you do have one.
- { (exit 1); exit 1; }
-fi
-
-
-fi
-
-fi
-
-
-
-(eval "as_func_return () {
- (exit \$1)
-}
-as_func_success () {
- as_func_return 0
-}
-as_func_failure () {
- as_func_return 1
-}
-as_func_ret_success () {
- return 0
-}
-as_func_ret_failure () {
- return 1
-}
-
-exitcode=0
-if as_func_success; then
- :
-else
- exitcode=1
- echo as_func_success failed.
-fi
-
-if as_func_failure; then
- exitcode=1
- echo as_func_failure succeeded.
-fi
-
-if as_func_ret_success; then
- :
-else
- exitcode=1
- echo as_func_ret_success failed.
-fi
-
-if as_func_ret_failure; then
- exitcode=1
- echo as_func_ret_failure succeeded.
-fi
-
-if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
- :
-else
- exitcode=1
- echo positional parameters were not saved.
-fi
-
-test \$exitcode = 0") || {
- echo No shell found that supports shell functions.
- echo Please tell autoconf at gnu.org about your system,
- echo including any error possibly output before this
- echo message
-}
-
-
-
- as_lineno_1=$LINENO
- as_lineno_2=$LINENO
- test "x$as_lineno_1" != "x$as_lineno_2" &&
- test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
-
- # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
- # uniformly replaced by the line number. The first 'sed' inserts a
- # line-number line after each line using $LINENO; the second 'sed'
- # does the real work. The second script uses 'N' to pair each
- # line-number line with the line containing $LINENO, and appends
- # trailing '-' during substitution so that $LINENO is not a special
- # case at line end.
- # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
- # scripts with optimization help from Paolo Bonzini. Blame Lee
- # E. McMahon (1931-1989) for sed's syntax. :-)
- sed -n '
- p
- /[$]LINENO/=
- ' <$as_myself |
- sed '
- s/[$]LINENO.*/&-/
- t lineno
- b
- :lineno
- N
- :loop
- s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
- t loop
- s/-\n.*//
- ' >$as_me.lineno &&
- chmod +x "$as_me.lineno" ||
- { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
- { (exit 1); exit 1; }; }
-
- # Don't try to exec as it changes $[0], causing all sort of problems
- # (the dirname of $[0] is not the place where we might find the
- # original and so on. Autoconf is especially sensitive to this).
- . "./$as_me.lineno"
- # Exit status is that of the last command.
- exit
-}
-
-
-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
- as_dirname=dirname
-else
- as_dirname=false
-fi
-
-ECHO_C= ECHO_N= ECHO_T=
-case `echo -n x` in
--n*)
- case `echo 'x\c'` in
- *c*) ECHO_T=' ';; # ECHO_T is single tab character.
- *) ECHO_C='\c';;
- esac;;
-*)
- ECHO_N='-n';;
-esac
-
-if expr a : '\(a\)' >/dev/null 2>&1 &&
- test "X`expr 00001 : '.*\(...\)'`" = X001; then
- as_expr=expr
-else
- as_expr=false
-fi
-
-rm -f conf$$ conf$$.exe conf$$.file
-if test -d conf$$.dir; then
- rm -f conf$$.dir/conf$$.file
-else
- rm -f conf$$.dir
- mkdir conf$$.dir
-fi
-echo >conf$$.file
-if ln -s conf$$.file conf$$ 2>/dev/null; then
- as_ln_s='ln -s'
- # ... but there are two gotchas:
- # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
- # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
- # In both cases, we have to default to `cp -p'.
- ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
- as_ln_s='cp -p'
-elif ln conf$$.file conf$$ 2>/dev/null; then
- as_ln_s=ln
-else
- as_ln_s='cp -p'
-fi
-rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
-rmdir conf$$.dir 2>/dev/null
-
-if mkdir -p . 2>/dev/null; then
- as_mkdir_p=:
-else
- test -d ./-p && rmdir ./-p
- as_mkdir_p=false
-fi
-
-if test -x / >/dev/null 2>&1; then
- as_test_x='test -x'
-else
- if ls -dL / >/dev/null 2>&1; then
- as_ls_L_option=L
- else
- as_ls_L_option=
- fi
- as_test_x='
- eval sh -c '\''
- if test -d "$1"; then
- test -d "$1/.";
- else
- case $1 in
- -*)set "./$1";;
- esac;
- case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
- ???[sx]*):;;*)false;;esac;fi
- '\'' sh
- '
-fi
-as_executable_p=$as_test_x
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
-
-
-
-# Check that we are running under the correct shell.
-SHELL=${CONFIG_SHELL-/bin/sh}
-
-case X$ECHO in
-X*--fallback-echo)
- # Remove one level of quotation (which was required for Make).
- ECHO=`echo "$ECHO" | sed 's,\\\\\$\\$0,'$0','`
- ;;
-esac
-
-echo=${ECHO-echo}
-if test "X$1" = X--no-reexec; then
- # Discard the --no-reexec flag, and continue.
- shift
-elif test "X$1" = X--fallback-echo; then
- # Avoid inline document here, it may be left over
- :
-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then
- # Yippee, $echo works!
- :
-else
- # Restart under the correct shell.
- exec $SHELL "$0" --no-reexec ${1+"$@"}
-fi
-
-if test "X$1" = X--fallback-echo; then
- # used as fallback echo
- shift
- cat <<EOF
-$*
-EOF
- exit 0
-fi
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-if test -z "$ECHO"; then
-if test "X${echo_test_string+set}" != Xset; then
-# find a string as large as possible, as long as the shell can cope with it
- for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
- # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
- if (echo_test_string=`eval $cmd`) 2>/dev/null &&
- echo_test_string=`eval $cmd` &&
- (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
- then
- break
- fi
- done
-fi
-
-if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- :
-else
- # The Solaris, AIX, and Digital Unix default echo programs unquote
- # backslashes. This makes it impossible to quote backslashes using
- # echo "$something" | sed 's/\\/\\\\/g'
- #
- # So, first we look for a working echo in the user's PATH.
-
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
- for dir in $PATH /usr/ucb; do
- IFS="$lt_save_ifs"
- if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
- test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- echo="$dir/echo"
- break
- fi
- done
- IFS="$lt_save_ifs"
-
- if test "X$echo" = Xecho; then
- # We didn't find a better echo, so look for alternatives.
- if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- # This shell has a builtin print -r that does the trick.
- echo='print -r'
- elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
- test "X$CONFIG_SHELL" != X/bin/ksh; then
- # If we have ksh, try running configure again with it.
- ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
- export ORIGINAL_CONFIG_SHELL
- CONFIG_SHELL=/bin/ksh
- export CONFIG_SHELL
- exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"}
- else
- # Try using printf.
- echo='printf %s\n'
- if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- # Cool, printf works
- :
- elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
- test "X$echo_testing_string" = 'X\t' &&
- echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
- export CONFIG_SHELL
- SHELL="$CONFIG_SHELL"
- export SHELL
- echo="$CONFIG_SHELL $0 --fallback-echo"
- elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
- test "X$echo_testing_string" = 'X\t' &&
- echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- echo="$CONFIG_SHELL $0 --fallback-echo"
- else
- # maybe with a smaller string...
- prev=:
-
- for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do
- if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
- then
- break
- fi
- prev="$cmd"
- done
-
- if test "$prev" != 'sed 50q "$0"'; then
- echo_test_string=`eval $prev`
- export echo_test_string
- exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"}
- else
- # Oops. We lost completely, so just stick with echo.
- echo=echo
- fi
- fi
- fi
- fi
-fi
-fi
-
-# Copy echo and quote the copy suitably for passing to libtool from
-# the Makefile, instead of quoting the original, which is used later.
-ECHO=$echo
-if test "X$ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then
- ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo"
-fi
-
-
-
-
-tagnames=${tagnames+${tagnames},}CXX
-
-tagnames=${tagnames+${tagnames},}F77
-
-exec 7<&0 </dev/null 6>&1
-
-# Name of the host.
-# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
-# so uname gets run too.
-ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
-
-#
-# Initializations.
-#
-ac_default_prefix=/usr/local
-ac_clean_files=
-ac_config_libobj_dir=.
-LIBOBJS=
-cross_compiling=no
-subdirs=
-MFLAGS=
-MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-
-# Identity of this package.
-PACKAGE_NAME='OpenBSM'
-PACKAGE_TARNAME='openbsm'
-PACKAGE_VERSION='1.0'
-PACKAGE_STRING='OpenBSM 1.0'
-PACKAGE_BUGREPORT='trustedbsd-audit at TrustesdBSD.org'
-
-ac_unique_file="bin/auditreduce/auditreduce.c"
-# Factoring default headers for most tests.
-ac_includes_default="\
-#include <stdio.h>
-#ifdef HAVE_SYS_TYPES_H
-# include <sys/types.h>
-#endif
-#ifdef HAVE_SYS_STAT_H
-# include <sys/stat.h>
-#endif
-#ifdef STDC_HEADERS
-# include <stdlib.h>
-# include <stddef.h>
-#else
-# ifdef HAVE_STDLIB_H
-# include <stdlib.h>
-# endif
-#endif
-#ifdef HAVE_STRING_H
-# if !defined STDC_HEADERS && defined HAVE_MEMORY_H
-# include <memory.h>
-# endif
-# include <string.h>
-#endif
-#ifdef HAVE_STRINGS_H
-# include <strings.h>
-#endif
-#ifdef HAVE_INTTYPES_H
-# include <inttypes.h>
-#endif
-#ifdef HAVE_STDINT_H
-# include <stdint.h>
-#endif
-#ifdef HAVE_UNISTD_H
-# include <unistd.h>
-#endif"
-
-ac_header_list=
-ac_func_list=
-ac_subst_vars='SHELL
-PATH_SEPARATOR
-PACKAGE_NAME
-PACKAGE_TARNAME
-PACKAGE_VERSION
-PACKAGE_STRING
-PACKAGE_BUGREPORT
-exec_prefix
-prefix
-program_transform_name
-bindir
-sbindir
-libexecdir
-datarootdir
-datadir
-sysconfdir
-sharedstatedir
-localstatedir
-includedir
-oldincludedir
-docdir
-infodir
-htmldir
-dvidir
-pdfdir
-psdir
-libdir
-localedir
-mandir
-DEFS
-ECHO_C
-ECHO_N
-ECHO_T
-LIBS
-build_alias
-host_alias
-target_alias
-MAINTAINER_MODE_TRUE
-MAINTAINER_MODE_FALSE
-MAINT
-CC
-CFLAGS
-LDFLAGS
-CPPFLAGS
-ac_ct_CC
-EXEEXT
-OBJEXT
-INSTALL_PROGRAM
-INSTALL_SCRIPT
-INSTALL_DATA
-build
-build_cpu
-build_vendor
-build_os
-host
-host_cpu
-host_vendor
-host_os
-SED
-GREP
-EGREP
-LN_S
-ECHO
-AR
-RANLIB
-STRIP
-CPP
-CXX
-CXXFLAGS
-ac_ct_CXX
-CXXCPP
-F77
-FFLAGS
-ac_ct_F77
-LIBTOOL
-am__isrc
-CYGPATH_W
-PACKAGE
-VERSION
-ACLOCAL
-AUTOCONF
-AUTOMAKE
-AUTOHEADER
-MAKEINFO
-install_sh
-INSTALL_STRIP_PROGRAM
-mkdir_p
-AWK
-SET_MAKE
-am__leading_dot
-AMTAR
-am__tar
-am__untar
-DEPDIR
-am__include
-am__quote
-AMDEP_TRUE
-AMDEP_FALSE
-AMDEPBACKSLASH
-CCDEPMODE
-am__fastdepCC_TRUE
-am__fastdepCC_FALSE
-CXXDEPMODE
-am__fastdepCXX_TRUE
-am__fastdepCXX_FALSE
-LIBOBJS
-HAVE_AUDIT_SYSCALLS_TRUE
-HAVE_AUDIT_SYSCALLS_FALSE
-LTLIBOBJS'
-ac_subst_files=''
- ac_precious_vars='build_alias
-host_alias
-target_alias
-CC
-CFLAGS
-LDFLAGS
-LIBS
-CPPFLAGS
-CPP
-CXX
-CXXFLAGS
-CCC
-CXXCPP
-F77
-FFLAGS'
-
-
-# Initialize some variables set by options.
-ac_init_help=
-ac_init_version=false
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-cache_file=/dev/null
-exec_prefix=NONE
-no_create=
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-srcdir=
-verbose=
-x_includes=NONE
-x_libraries=NONE
-
-# Installation directory options.
-# These are left unexpanded so users can "make install exec_prefix=/foo"
-# and all the variables that are supposed to be based on exec_prefix
-# by default will actually change.
-# Use braces instead of parens because sh, perl, etc. also accept them.
-# (The list follows the same order as the GNU Coding Standards.)
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datarootdir='${prefix}/share'
-datadir='${datarootdir}'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
-infodir='${datarootdir}/info'
-htmldir='${docdir}'
-dvidir='${docdir}'
-pdfdir='${docdir}'
-psdir='${docdir}'
-libdir='${exec_prefix}/lib'
-localedir='${datarootdir}/locale'
-mandir='${datarootdir}/man'
-
-ac_prev=
-ac_dashdash=
-for ac_option
-do
- # If the previous option needs an argument, assign it.
- if test -n "$ac_prev"; then
- eval $ac_prev=\$ac_option
- ac_prev=
- continue
- fi
-
- case $ac_option in
- *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
- *) ac_optarg=yes ;;
- esac
-
- # Accept the important Cygnus configure options, so we can diagnose typos.
-
- case $ac_dashdash$ac_option in
- --)
- ac_dashdash=yes ;;
-
- -bindir | --bindir | --bindi | --bind | --bin | --bi)
- ac_prev=bindir ;;
- -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
- bindir=$ac_optarg ;;
-
- -build | --build | --buil | --bui | --bu)
- ac_prev=build_alias ;;
- -build=* | --build=* | --buil=* | --bui=* | --bu=*)
- build_alias=$ac_optarg ;;
-
- -cache-file | --cache-file | --cache-fil | --cache-fi \
- | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
- ac_prev=cache_file ;;
- -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
- | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
- cache_file=$ac_optarg ;;
-
- --config-cache | -C)
- cache_file=config.cache ;;
-
- -datadir | --datadir | --datadi | --datad)
- ac_prev=datadir ;;
- -datadir=* | --datadir=* | --datadi=* | --datad=*)
- datadir=$ac_optarg ;;
-
- -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
- | --dataroo | --dataro | --datar)
- ac_prev=datarootdir ;;
- -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
- | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
- datarootdir=$ac_optarg ;;
-
- -disable-* | --disable-*)
- ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
- # Reject names that are not valid shell variable names.
- expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&
- { echo "$as_me: error: invalid feature name: $ac_feature" >&2
- { (exit 1); exit 1; }; }
- ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
- eval enable_$ac_feature=no ;;
-
- -docdir | --docdir | --docdi | --doc | --do)
- ac_prev=docdir ;;
- -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
- docdir=$ac_optarg ;;
-
- -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
- ac_prev=dvidir ;;
- -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
- dvidir=$ac_optarg ;;
-
- -enable-* | --enable-*)
- ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
- # Reject names that are not valid shell variable names.
- expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&
- { echo "$as_me: error: invalid feature name: $ac_feature" >&2
- { (exit 1); exit 1; }; }
- ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
- eval enable_$ac_feature=\$ac_optarg ;;
-
- -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
- | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
- | --exec | --exe | --ex)
- ac_prev=exec_prefix ;;
- -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
- | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
- | --exec=* | --exe=* | --ex=*)
- exec_prefix=$ac_optarg ;;
-
- -gas | --gas | --ga | --g)
- # Obsolete; use --with-gas.
- with_gas=yes ;;
-
- -help | --help | --hel | --he | -h)
- ac_init_help=long ;;
- -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
- ac_init_help=recursive ;;
- -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
- ac_init_help=short ;;
-
- -host | --host | --hos | --ho)
- ac_prev=host_alias ;;
- -host=* | --host=* | --hos=* | --ho=*)
- host_alias=$ac_optarg ;;
-
- -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
- ac_prev=htmldir ;;
- -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
- | --ht=*)
- htmldir=$ac_optarg ;;
-
- -includedir | --includedir | --includedi | --included | --include \
- | --includ | --inclu | --incl | --inc)
- ac_prev=includedir ;;
- -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
- | --includ=* | --inclu=* | --incl=* | --inc=*)
- includedir=$ac_optarg ;;
-
- -infodir | --infodir | --infodi | --infod | --info | --inf)
- ac_prev=infodir ;;
- -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
- infodir=$ac_optarg ;;
-
- -libdir | --libdir | --libdi | --libd)
- ac_prev=libdir ;;
- -libdir=* | --libdir=* | --libdi=* | --libd=*)
- libdir=$ac_optarg ;;
-
- -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
- | --libexe | --libex | --libe)
- ac_prev=libexecdir ;;
- -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
- | --libexe=* | --libex=* | --libe=*)
- libexecdir=$ac_optarg ;;
-
- -localedir | --localedir | --localedi | --localed | --locale)
- ac_prev=localedir ;;
- -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
- localedir=$ac_optarg ;;
-
- -localstatedir | --localstatedir | --localstatedi | --localstated \
- | --localstate | --localstat | --localsta | --localst | --locals)
- ac_prev=localstatedir ;;
- -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
- | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
- localstatedir=$ac_optarg ;;
-
- -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
- ac_prev=mandir ;;
- -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
- mandir=$ac_optarg ;;
-
- -nfp | --nfp | --nf)
- # Obsolete; use --without-fp.
- with_fp=no ;;
-
- -no-create | --no-create | --no-creat | --no-crea | --no-cre \
- | --no-cr | --no-c | -n)
- no_create=yes ;;
-
- -no-recursion | --no-recursion | --no-recursio | --no-recursi \
- | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
- no_recursion=yes ;;
-
- -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
- | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
- | --oldin | --oldi | --old | --ol | --o)
- ac_prev=oldincludedir ;;
- -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
- | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
- | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
- oldincludedir=$ac_optarg ;;
-
- -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
- ac_prev=prefix ;;
- -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
- prefix=$ac_optarg ;;
-
- -program-prefix | --program-prefix | --program-prefi | --program-pref \
- | --program-pre | --program-pr | --program-p)
- ac_prev=program_prefix ;;
- -program-prefix=* | --program-prefix=* | --program-prefi=* \
- | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
- program_prefix=$ac_optarg ;;
-
- -program-suffix | --program-suffix | --program-suffi | --program-suff \
- | --program-suf | --program-su | --program-s)
- ac_prev=program_suffix ;;
- -program-suffix=* | --program-suffix=* | --program-suffi=* \
- | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
- program_suffix=$ac_optarg ;;
-
- -program-transform-name | --program-transform-name \
- | --program-transform-nam | --program-transform-na \
- | --program-transform-n | --program-transform- \
- | --program-transform | --program-transfor \
- | --program-transfo | --program-transf \
- | --program-trans | --program-tran \
- | --progr-tra | --program-tr | --program-t)
- ac_prev=program_transform_name ;;
- -program-transform-name=* | --program-transform-name=* \
- | --program-transform-nam=* | --program-transform-na=* \
- | --program-transform-n=* | --program-transform-=* \
- | --program-transform=* | --program-transfor=* \
- | --program-transfo=* | --program-transf=* \
- | --program-trans=* | --program-tran=* \
- | --progr-tra=* | --program-tr=* | --program-t=*)
- program_transform_name=$ac_optarg ;;
-
- -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
- ac_prev=pdfdir ;;
- -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
- pdfdir=$ac_optarg ;;
-
- -psdir | --psdir | --psdi | --psd | --ps)
- ac_prev=psdir ;;
- -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
- psdir=$ac_optarg ;;
-
- -q | -quiet | --quiet | --quie | --qui | --qu | --q \
- | -silent | --silent | --silen | --sile | --sil)
- silent=yes ;;
-
- -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
- ac_prev=sbindir ;;
- -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
- | --sbi=* | --sb=*)
- sbindir=$ac_optarg ;;
-
- -sharedstatedir | --sharedstatedir | --sharedstatedi \
- | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
- | --sharedst | --shareds | --shared | --share | --shar \
- | --sha | --sh)
- ac_prev=sharedstatedir ;;
- -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
- | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
- | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
- | --sha=* | --sh=*)
- sharedstatedir=$ac_optarg ;;
-
- -site | --site | --sit)
- ac_prev=site ;;
- -site=* | --site=* | --sit=*)
- site=$ac_optarg ;;
-
- -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
- ac_prev=srcdir ;;
- -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
- srcdir=$ac_optarg ;;
-
- -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
- | --syscon | --sysco | --sysc | --sys | --sy)
- ac_prev=sysconfdir ;;
- -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
- | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
- sysconfdir=$ac_optarg ;;
-
- -target | --target | --targe | --targ | --tar | --ta | --t)
- ac_prev=target_alias ;;
- -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
- target_alias=$ac_optarg ;;
-
- -v | -verbose | --verbose | --verbos | --verbo | --verb)
- verbose=yes ;;
-
- -version | --version | --versio | --versi | --vers | -V)
- ac_init_version=: ;;
-
- -with-* | --with-*)
- ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
- # Reject names that are not valid shell variable names.
- expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
- { echo "$as_me: error: invalid package name: $ac_package" >&2
- { (exit 1); exit 1; }; }
- ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
- eval with_$ac_package=\$ac_optarg ;;
-
- -without-* | --without-*)
- ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
- # Reject names that are not valid shell variable names.
- expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
- { echo "$as_me: error: invalid package name: $ac_package" >&2
- { (exit 1); exit 1; }; }
- ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
- eval with_$ac_package=no ;;
-
- --x)
- # Obsolete; use --with-x.
- with_x=yes ;;
-
- -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
- | --x-incl | --x-inc | --x-in | --x-i)
- ac_prev=x_includes ;;
- -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
- | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
- x_includes=$ac_optarg ;;
-
- -x-libraries | --x-libraries | --x-librarie | --x-librari \
- | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
- ac_prev=x_libraries ;;
- -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
- | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
- x_libraries=$ac_optarg ;;
-
- -*) { echo "$as_me: error: unrecognized option: $ac_option
-Try \`$0 --help' for more information." >&2
- { (exit 1); exit 1; }; }
- ;;
-
- *=*)
- ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
- # Reject names that are not valid shell variable names.
- expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
- { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
- { (exit 1); exit 1; }; }
- eval $ac_envvar=\$ac_optarg
- export $ac_envvar ;;
-
- *)
- # FIXME: should be removed in autoconf 3.0.
- echo "$as_me: WARNING: you should use --build, --host, --target" >&2
- expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
- echo "$as_me: WARNING: invalid host type: $ac_option" >&2
- : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
- ;;
-
- esac
-done
-
-if test -n "$ac_prev"; then
- ac_option=--`echo $ac_prev | sed 's/_/-/g'`
- { echo "$as_me: error: missing argument to $ac_option" >&2
- { (exit 1); exit 1; }; }
-fi
-
-# Be sure to have absolute directory names.
-for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \
- datadir sysconfdir sharedstatedir localstatedir includedir \
- oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
- libdir localedir mandir
-do
- eval ac_val=\$$ac_var
- case $ac_val in
- [\\/$]* | ?:[\\/]* ) continue;;
- NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
- esac
- { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
- { (exit 1); exit 1; }; }
-done
-
-# There might be people who depend on the old broken behavior: `$host'
-# used to hold the argument of --host etc.
-# FIXME: To remove some day.
-build=$build_alias
-host=$host_alias
-target=$target_alias
-
-# FIXME: To remove some day.
-if test "x$host_alias" != x; then
- if test "x$build_alias" = x; then
- cross_compiling=maybe
- echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
- If a cross compiler is detected then cross compile mode will be used." >&2
- elif test "x$build_alias" != "x$host_alias"; then
- cross_compiling=yes
- fi
-fi
-
-ac_tool_prefix=
-test -n "$host_alias" && ac_tool_prefix=$host_alias-
-
-test "$silent" = yes && exec 6>/dev/null
-
-
-ac_pwd=`pwd` && test -n "$ac_pwd" &&
-ac_ls_di=`ls -di .` &&
-ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
- { echo "$as_me: error: Working directory cannot be determined" >&2
- { (exit 1); exit 1; }; }
-test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
- { echo "$as_me: error: pwd does not report name of working directory" >&2
- { (exit 1); exit 1; }; }
-
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
- ac_srcdir_defaulted=yes
- # Try the directory containing this script, then the parent directory.
- ac_confdir=`$as_dirname -- "$0" ||
-$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$0" : 'X\(//\)[^/]' \| \
- X"$0" : 'X\(//\)$' \| \
- X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-echo X"$0" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- srcdir=$ac_confdir
- if test ! -r "$srcdir/$ac_unique_file"; then
- srcdir=..
- fi
-else
- ac_srcdir_defaulted=no
-fi
-if test ! -r "$srcdir/$ac_unique_file"; then
- test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
- { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
- { (exit 1); exit 1; }; }
-fi
-ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
-ac_abs_confdir=`(
- cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2
- { (exit 1); exit 1; }; }
- pwd)`
-# When building in place, set srcdir=.
-if test "$ac_abs_confdir" = "$ac_pwd"; then
- srcdir=.
-fi
-# Remove unnecessary trailing slashes from srcdir.
-# Double slashes in file names in object file debugging info
-# mess up M-x gdb in Emacs.
-case $srcdir in
-*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
-esac
-for ac_var in $ac_precious_vars; do
- eval ac_env_${ac_var}_set=\${${ac_var}+set}
- eval ac_env_${ac_var}_value=\$${ac_var}
- eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
- eval ac_cv_env_${ac_var}_value=\$${ac_var}
-done
-
-#
-# Report the --help message.
-#
-if test "$ac_init_help" = "long"; then
- # Omit some internal or obsolete options to make the list less imposing.
- # This message is too long to be a string in the A/UX 3.1 sh.
- cat <<_ACEOF
-\`configure' configures OpenBSM 1.0 to adapt to many kinds of systems.
-
-Usage: $0 [OPTION]... [VAR=VALUE]...
-
-To assign environment variables (e.g., CC, CFLAGS...), specify them as
-VAR=VALUE. See below for descriptions of some of the useful variables.
-
-Defaults for the options are specified in brackets.
-
-Configuration:
- -h, --help display this help and exit
- --help=short display options specific to this package
- --help=recursive display the short help of all the included packages
- -V, --version display version information and exit
- -q, --quiet, --silent do not print \`checking...' messages
- --cache-file=FILE cache test results in FILE [disabled]
- -C, --config-cache alias for \`--cache-file=config.cache'
- -n, --no-create do not create output files
- --srcdir=DIR find the sources in DIR [configure dir or \`..']
-
-Installation directories:
- --prefix=PREFIX install architecture-independent files in PREFIX
- [$ac_default_prefix]
- --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
- [PREFIX]
-
-By default, \`make install' will install all the files in
-\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
-an installation prefix other than \`$ac_default_prefix' using \`--prefix',
-for instance \`--prefix=\$HOME'.
-
-For better control, use the options below.
-
-Fine tuning of the installation directories:
- --bindir=DIR user executables [EPREFIX/bin]
- --sbindir=DIR system admin executables [EPREFIX/sbin]
- --libexecdir=DIR program executables [EPREFIX/libexec]
- --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
- --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
- --localstatedir=DIR modifiable single-machine data [PREFIX/var]
- --libdir=DIR object code libraries [EPREFIX/lib]
- --includedir=DIR C header files [PREFIX/include]
- --oldincludedir=DIR C header files for non-gcc [/usr/include]
- --datarootdir=DIR read-only arch.-independent data root [PREFIX/share]
- --datadir=DIR read-only architecture-independent data [DATAROOTDIR]
- --infodir=DIR info documentation [DATAROOTDIR/info]
- --localedir=DIR locale-dependent data [DATAROOTDIR/locale]
- --mandir=DIR man documentation [DATAROOTDIR/man]
- --docdir=DIR documentation root [DATAROOTDIR/doc/openbsm]
- --htmldir=DIR html documentation [DOCDIR]
- --dvidir=DIR dvi documentation [DOCDIR]
- --pdfdir=DIR pdf documentation [DOCDIR]
- --psdir=DIR ps documentation [DOCDIR]
-_ACEOF
-
- cat <<\_ACEOF
-
-Program names:
- --program-prefix=PREFIX prepend PREFIX to installed program names
- --program-suffix=SUFFIX append SUFFIX to installed program names
- --program-transform-name=PROGRAM run sed PROGRAM on installed program names
-
-System types:
- --build=BUILD configure for building on BUILD [guessed]
- --host=HOST cross-compile to build programs to run on HOST [BUILD]
-_ACEOF
-fi
-
-if test -n "$ac_init_help"; then
- case $ac_init_help in
- short | recursive ) echo "Configuration of OpenBSM 1.0:";;
- esac
- cat <<\_ACEOF
-
-Optional Features:
- --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
- --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
- --enable-maintainer-mode enable make rules and dependencies not useful
- (and sometimes confusing) to the casual installer
- --enable-shared[=PKGS] build shared libraries [default=yes]
- --enable-static[=PKGS] build static libraries [default=yes]
- --enable-fast-install[=PKGS]
- optimize for fast installation [default=yes]
- --disable-libtool-lock avoid locking (might break parallel builds)
- --disable-dependency-tracking speeds up one-time build
- --enable-dependency-tracking do not reject slow dependency extractors
-
-Optional Packages:
- --with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
- --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
- --with-gnu-ld assume the C compiler uses GNU ld [default=no]
- --with-pic try to use only PIC/non-PIC objects [default=use
- both]
- --with-tags[=TAGS] include additional configurations [automatic]
-
-Some influential environment variables:
- CC C compiler command
- CFLAGS C compiler flags
- LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
- nonstandard directory <lib dir>
- LIBS libraries to pass to the linker, e.g. -l<library>
- CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I<include dir> if
- you have headers in a nonstandard directory <include dir>
- CPP C preprocessor
- CXX C++ compiler command
- CXXFLAGS C++ compiler flags
- CXXCPP C++ preprocessor
- F77 Fortran 77 compiler command
- FFLAGS Fortran 77 compiler flags
-
-Use these variables to override the choices made by `configure' or to help
-it to find libraries and programs with nonstandard names/locations.
-
-Report bugs to <trustedbsd-audit at TrustesdBSD.org>.
-_ACEOF
-ac_status=$?
-fi
-
-if test "$ac_init_help" = "recursive"; then
- # If there are subdirs, report their specific --help.
- for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
- test -d "$ac_dir" || continue
- ac_builddir=.
-
-case "$ac_dir" in
-.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
-*)
- ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
- # A ".." for each directory in $ac_dir_suffix.
- ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
- case $ac_top_builddir_sub in
- "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
- *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
- esac ;;
-esac
-ac_abs_top_builddir=$ac_pwd
-ac_abs_builddir=$ac_pwd$ac_dir_suffix
-# for backward compatibility:
-ac_top_builddir=$ac_top_build_prefix
-
-case $srcdir in
- .) # We are building in place.
- ac_srcdir=.
- ac_top_srcdir=$ac_top_builddir_sub
- ac_abs_top_srcdir=$ac_pwd ;;
- [\\/]* | ?:[\\/]* ) # Absolute name.
- ac_srcdir=$srcdir$ac_dir_suffix;
- ac_top_srcdir=$srcdir
- ac_abs_top_srcdir=$srcdir ;;
- *) # Relative name.
- ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
- ac_top_srcdir=$ac_top_build_prefix$srcdir
- ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
-esac
-ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
-
- cd "$ac_dir" || { ac_status=$?; continue; }
- # Check for guested configure.
- if test -f "$ac_srcdir/configure.gnu"; then
- echo &&
- $SHELL "$ac_srcdir/configure.gnu" --help=recursive
- elif test -f "$ac_srcdir/configure"; then
- echo &&
- $SHELL "$ac_srcdir/configure" --help=recursive
- else
- echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
- fi || ac_status=$?
- cd "$ac_pwd" || { ac_status=$?; break; }
- done
-fi
-
-test -n "$ac_init_help" && exit $ac_status
-if $ac_init_version; then
- cat <<\_ACEOF
-OpenBSM configure 1.0
-generated by GNU Autoconf 2.61
-
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
-This configure script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it.
-_ACEOF
- exit
-fi
-cat >config.log <<_ACEOF
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-
-It was created by OpenBSM $as_me 1.0, which was
-generated by GNU Autoconf 2.61. Invocation command line was
-
- $ $0 $@
-
-_ACEOF
-exec 5>>config.log
-{
-cat <<_ASUNAME
-## --------- ##
-## Platform. ##
-## --------- ##
-
-hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
-uname -m = `(uname -m) 2>/dev/null || echo unknown`
-uname -r = `(uname -r) 2>/dev/null || echo unknown`
-uname -s = `(uname -s) 2>/dev/null || echo unknown`
-uname -v = `(uname -v) 2>/dev/null || echo unknown`
-
-/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
-/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
-
-/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
-/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
-/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
-/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown`
-/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
-/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
-/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
-
-_ASUNAME
-
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- echo "PATH: $as_dir"
-done
-IFS=$as_save_IFS
-
-} >&5
-
-cat >&5 <<_ACEOF
-
-
-## ----------- ##
-## Core tests. ##
-## ----------- ##
-
-_ACEOF
-
-
-# Keep a trace of the command line.
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Strip out --silent because we don't want to record it for future runs.
-# Also quote any args containing shell meta-characters.
-# Make two passes to allow for proper duplicate-argument suppression.
-ac_configure_args=
-ac_configure_args0=
-ac_configure_args1=
-ac_must_keep_next=false
-for ac_pass in 1 2
-do
- for ac_arg
- do
- case $ac_arg in
- -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
- -q | -quiet | --quiet | --quie | --qui | --qu | --q \
- | -silent | --silent | --silen | --sile | --sil)
- continue ;;
- *\'*)
- ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
- esac
- case $ac_pass in
- 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
- 2)
- ac_configure_args1="$ac_configure_args1 '$ac_arg'"
- if test $ac_must_keep_next = true; then
- ac_must_keep_next=false # Got value, back to normal.
- else
- case $ac_arg in
- *=* | --config-cache | -C | -disable-* | --disable-* \
- | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
- | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
- | -with-* | --with-* | -without-* | --without-* | --x)
- case "$ac_configure_args0 " in
- "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
- esac
- ;;
- -* ) ac_must_keep_next=true ;;
- esac
- fi
- ac_configure_args="$ac_configure_args '$ac_arg'"
- ;;
- esac
- done
-done
-$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; }
-$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; }
-
-# When interrupted or exit'd, cleanup temporary files, and complete
-# config.log. We remove comments because anyway the quotes in there
-# would cause problems or look ugly.
-# WARNING: Use '\'' to represent an apostrophe within the trap.
-# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
-trap 'exit_status=$?
- # Save into config.log some information that might help in debugging.
- {
- echo
-
- cat <<\_ASBOX
-## ---------------- ##
-## Cache variables. ##
-## ---------------- ##
-_ASBOX
- echo
- # The following way of writing the cache mishandles newlines in values,
-(
- for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
- eval ac_val=\$$ac_var
- case $ac_val in #(
- *${as_nl}*)
- case $ac_var in #(
- *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
-echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
- esac
- case $ac_var in #(
- _ | IFS | as_nl) ;; #(
- *) $as_unset $ac_var ;;
- esac ;;
- esac
- done
- (set) 2>&1 |
- case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
- *${as_nl}ac_space=\ *)
- sed -n \
- "s/'\''/'\''\\\\'\'''\''/g;
- s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
- ;; #(
- *)
- sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
- ;;
- esac |
- sort
-)
- echo
-
- cat <<\_ASBOX
-## ----------------- ##
-## Output variables. ##
-## ----------------- ##
-_ASBOX
- echo
- for ac_var in $ac_subst_vars
- do
- eval ac_val=\$$ac_var
- case $ac_val in
- *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
- esac
- echo "$ac_var='\''$ac_val'\''"
- done | sort
- echo
-
- if test -n "$ac_subst_files"; then
- cat <<\_ASBOX
-## ------------------- ##
-## File substitutions. ##
-## ------------------- ##
-_ASBOX
- echo
- for ac_var in $ac_subst_files
- do
- eval ac_val=\$$ac_var
- case $ac_val in
- *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
- esac
- echo "$ac_var='\''$ac_val'\''"
- done | sort
- echo
- fi
-
- if test -s confdefs.h; then
- cat <<\_ASBOX
-## ----------- ##
-## confdefs.h. ##
-## ----------- ##
-_ASBOX
- echo
- cat confdefs.h
- echo
- fi
- test "$ac_signal" != 0 &&
- echo "$as_me: caught signal $ac_signal"
- echo "$as_me: exit $exit_status"
- } >&5
- rm -f core *.core core.conftest.* &&
- rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
- exit $exit_status
-' 0
-for ac_signal in 1 2 13 15; do
- trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
-done
-ac_signal=0
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -f -r conftest* confdefs.h
-
-# Predefined preprocessor variables.
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_NAME "$PACKAGE_NAME"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_VERSION "$PACKAGE_VERSION"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_STRING "$PACKAGE_STRING"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
-_ACEOF
-
-
-# Let the site file select an alternate cache file if it wants to.
-# Prefer explicitly selected file to automatically selected ones.
-if test -n "$CONFIG_SITE"; then
- set x "$CONFIG_SITE"
-elif test "x$prefix" != xNONE; then
- set x "$prefix/share/config.site" "$prefix/etc/config.site"
-else
- set x "$ac_default_prefix/share/config.site" \
- "$ac_default_prefix/etc/config.site"
-fi
-shift
-for ac_site_file
-do
- if test -r "$ac_site_file"; then
- { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
-echo "$as_me: loading site script $ac_site_file" >&6;}
- sed 's/^/| /' "$ac_site_file" >&5
- . "$ac_site_file"
- fi
-done
-
-if test -r "$cache_file"; then
- # Some versions of bash will fail to source /dev/null (special
- # files actually), so we avoid doing that.
- if test -f "$cache_file"; then
- { echo "$as_me:$LINENO: loading cache $cache_file" >&5
-echo "$as_me: loading cache $cache_file" >&6;}
- case $cache_file in
- [\\/]* | ?:[\\/]* ) . "$cache_file";;
- *) . "./$cache_file";;
- esac
- fi
-else
- { echo "$as_me:$LINENO: creating cache $cache_file" >&5
-echo "$as_me: creating cache $cache_file" >&6;}
- >$cache_file
-fi
-
-ac_header_list="$ac_header_list sys/time.h"
-ac_header_list="$ac_header_list unistd.h"
-ac_func_list="$ac_func_list alarm"
-# Check that the precious variables saved in the cache have kept the same
-# value.
-ac_cache_corrupted=false
-for ac_var in $ac_precious_vars; do
- eval ac_old_set=\$ac_cv_env_${ac_var}_set
- eval ac_new_set=\$ac_env_${ac_var}_set
- eval ac_old_val=\$ac_cv_env_${ac_var}_value
- eval ac_new_val=\$ac_env_${ac_var}_value
- case $ac_old_set,$ac_new_set in
- set,)
- { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
-echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
- ac_cache_corrupted=: ;;
- ,set)
- { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
-echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
- ac_cache_corrupted=: ;;
- ,);;
- *)
- if test "x$ac_old_val" != "x$ac_new_val"; then
- { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
-echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
- { echo "$as_me:$LINENO: former value: $ac_old_val" >&5
-echo "$as_me: former value: $ac_old_val" >&2;}
- { echo "$as_me:$LINENO: current value: $ac_new_val" >&5
-echo "$as_me: current value: $ac_new_val" >&2;}
- ac_cache_corrupted=:
- fi;;
- esac
- # Pass precious variables to config.status.
- if test "$ac_new_set" = set; then
- case $ac_new_val in
- *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
- *) ac_arg=$ac_var=$ac_new_val ;;
- esac
- case " $ac_configure_args " in
- *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
- *) ac_configure_args="$ac_configure_args '$ac_arg'" ;;
- esac
- fi
-done
-if $ac_cache_corrupted; then
- { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
-echo "$as_me: error: changes in the environment can compromise the build" >&2;}
- { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
-echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-
-
-ac_aux_dir=
-for ac_dir in config "$srcdir"/config; do
- if test -f "$ac_dir/install-sh"; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install-sh -c"
- break
- elif test -f "$ac_dir/install.sh"; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install.sh -c"
- break
- elif test -f "$ac_dir/shtool"; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/shtool install -c"
- break
- fi
-done
-if test -z "$ac_aux_dir"; then
- { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in config \"$srcdir\"/config" >&5
-echo "$as_me: error: cannot find install-sh or install.sh in config \"$srcdir\"/config" >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-# These three variables are undocumented and unsupported,
-# and are intended to be withdrawn in a future Autoconf release.
-# They can cause serious problems if a builder's source tree is in a directory
-# whose full name contains unusual characters.
-ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var.
-ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var.
-ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var.
-
-
-ac_config_headers="$ac_config_headers config/config.h"
-
-{ echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5
-echo $ECHO_N "checking whether to enable maintainer-specific portions of Makefiles... $ECHO_C" >&6; }
- # Check whether --enable-maintainer-mode was given.
-if test "${enable_maintainer_mode+set}" = set; then
- enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval
-else
- USE_MAINTAINER_MODE=no
-fi
-
- { echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5
-echo "${ECHO_T}$USE_MAINTAINER_MODE" >&6; }
- if test $USE_MAINTAINER_MODE = yes; then
- MAINTAINER_MODE_TRUE=
- MAINTAINER_MODE_FALSE='#'
-else
- MAINTAINER_MODE_TRUE='#'
- MAINTAINER_MODE_FALSE=
-fi
-
- MAINT=$MAINTAINER_MODE_TRUE
-
-
-
-# Checks for programs.
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
-set dummy ${ac_tool_prefix}gcc; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_CC="${ac_tool_prefix}gcc"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- { echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_CC"; then
- ac_ct_CC=$CC
- # Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$ac_ct_CC"; then
- ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_CC="gcc"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
- { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
- if test "x$ac_ct_CC" = x; then
- CC=""
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf at gnu.org." >&5
-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf at gnu.org." >&2;}
-ac_tool_warned=yes ;;
-esac
- CC=$ac_ct_CC
- fi
-else
- CC="$ac_cv_prog_CC"
-fi
-
-if test -z "$CC"; then
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
-set dummy ${ac_tool_prefix}cc; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_CC="${ac_tool_prefix}cc"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- { echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
- fi
-fi
-if test -z "$CC"; then
- # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
- ac_prog_rejected=no
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
- ac_prog_rejected=yes
- continue
- fi
- ac_cv_prog_CC="cc"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-if test $ac_prog_rejected = yes; then
- # We found a bogon in the path, so make sure we never use it.
- set dummy $ac_cv_prog_CC
- shift
- if test $# != 0; then
- # We chose a different compiler from the bogus one.
- # However, it has the same basename, so the bogon will be chosen
- # first if we set CC to just the basename; use the full file name.
- shift
- ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
- fi
-fi
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- { echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-fi
-if test -z "$CC"; then
- if test -n "$ac_tool_prefix"; then
- for ac_prog in cl.exe
- do
- # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- { echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
- test -n "$CC" && break
- done
-fi
-if test -z "$CC"; then
- ac_ct_CC=$CC
- for ac_prog in cl.exe
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$ac_ct_CC"; then
- ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_CC="$ac_prog"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
- { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
- test -n "$ac_ct_CC" && break
-done
-
- if test "x$ac_ct_CC" = x; then
- CC=""
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf at gnu.org." >&5
-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf at gnu.org." >&2;}
-ac_tool_warned=yes ;;
-esac
- CC=$ac_ct_CC
- fi
-fi
-
-fi
-
-
-test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH
-See \`config.log' for more details." >&5
-echo "$as_me: error: no acceptable C compiler found in \$PATH
-See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
-
-# Provide some information about the compiler.
-echo "$as_me:$LINENO: checking for C compiler version" >&5
-ac_compiler=`set X $ac_compile; echo $2`
-{ (ac_try="$ac_compiler --version >&5"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compiler --version >&5") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
-{ (ac_try="$ac_compiler -v >&5"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compiler -v >&5") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
-{ (ac_try="$ac_compiler -V >&5"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compiler -V >&5") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
-
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files a.out a.exe b.out"
-# Try to create an executable without -o first, disregard a.out.
-# It will help us diagnose broken compilers, and finding out an intuition
-# of exeext.
-{ echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
-echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6; }
-ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
-#
-# List of possible output files, starting from the most likely.
-# The algorithm is not robust to junk in `.', hence go to wildcards (a.*)
-# only as a last resort. b.out is created by i960 compilers.
-ac_files='a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out'
-#
-# The IRIX 6 linker writes into existing files which may not be
-# executable, retaining their permissions. Remove them first so a
-# subsequent execution test works.
-ac_rmfiles=
-for ac_file in $ac_files
-do
- case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;;
- * ) ac_rmfiles="$ac_rmfiles $ac_file";;
- esac
-done
-rm -f $ac_rmfiles
-
-if { (ac_try="$ac_link_default"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link_default") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
- # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
-# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
-# in a Makefile. We should not override ac_cv_exeext if it was cached,
-# so that the user can short-circuit this test for compilers unknown to
-# Autoconf.
-for ac_file in $ac_files ''
-do
- test -f "$ac_file" || continue
- case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj )
- ;;
- [ab].out )
- # We found the default executable, but exeext='' is most
- # certainly right.
- break;;
- *.* )
- if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
- then :; else
- ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
- fi
- # We set ac_cv_exeext here because the later test for it is not
- # safe: cross compilers may not add the suffix if given an `-o'
- # argument, so we may need to know it at that point already.
- # Even if this section looks crufty: it has the advantage of
- # actually working.
- break;;
- * )
- break;;
- esac
-done
-test "$ac_cv_exeext" = no && ac_cv_exeext=
-
-else
- ac_file=''
-fi
-
-{ echo "$as_me:$LINENO: result: $ac_file" >&5
-echo "${ECHO_T}$ac_file" >&6; }
-if test -z "$ac_file"; then
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-{ { echo "$as_me:$LINENO: error: C compiler cannot create executables
-See \`config.log' for more details." >&5
-echo "$as_me: error: C compiler cannot create executables
-See \`config.log' for more details." >&2;}
- { (exit 77); exit 77; }; }
-fi
-
-ac_exeext=$ac_cv_exeext
-
-# Check that the compiler produces executables we can run. If not, either
-# the compiler is broken, or we cross compile.
-{ echo "$as_me:$LINENO: checking whether the C compiler works" >&5
-echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6; }
-# FIXME: These cross compiler hacks should be removed for Autoconf 3.0
-# If not cross compiling, check that we can run a simple program.
-if test "$cross_compiling" != yes; then
- if { ac_try='./$ac_file'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- cross_compiling=no
- else
- if test "$cross_compiling" = maybe; then
- cross_compiling=yes
- else
- { { echo "$as_me:$LINENO: error: cannot run C compiled programs.
-If you meant to cross compile, use \`--host'.
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot run C compiled programs.
-If you meant to cross compile, use \`--host'.
-See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
- fi
- fi
-fi
-{ echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6; }
-
-rm -f a.out a.exe conftest$ac_cv_exeext b.out
-ac_clean_files=$ac_clean_files_save
-# Check that the compiler produces executables we can run. If not, either
-# the compiler is broken, or we cross compile.
-{ echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
-echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6; }
-{ echo "$as_me:$LINENO: result: $cross_compiling" >&5
-echo "${ECHO_T}$cross_compiling" >&6; }
-
-{ echo "$as_me:$LINENO: checking for suffix of executables" >&5
-echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6; }
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
- # If both `conftest.exe' and `conftest' are `present' (well, observable)
-# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will
-# work properly (i.e., refer to `conftest.exe'), while it won't with
-# `rm'.
-for ac_file in conftest.exe conftest conftest.*; do
- test -f "$ac_file" || continue
- case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;;
- *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
- break;;
- * ) break;;
- esac
-done
-else
- { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute suffix of executables: cannot compile and link
-See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-rm -f conftest$ac_cv_exeext
-{ echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
-echo "${ECHO_T}$ac_cv_exeext" >&6; }
-
-rm -f conftest.$ac_ext
-EXEEXT=$ac_cv_exeext
-ac_exeext=$EXEEXT
-{ echo "$as_me:$LINENO: checking for suffix of object files" >&5
-echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6; }
-if test "${ac_cv_objext+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.o conftest.obj
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
- for ac_file in conftest.o conftest.obj conftest.*; do
- test -f "$ac_file" || continue;
- case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf ) ;;
- *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
- break;;
- esac
-done
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute suffix of object files: cannot compile
-See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-rm -f conftest.$ac_cv_objext conftest.$ac_ext
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
-echo "${ECHO_T}$ac_cv_objext" >&6; }
-OBJEXT=$ac_cv_objext
-ac_objext=$OBJEXT
-{ echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
-echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6; }
-if test "${ac_cv_c_compiler_gnu+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-#ifndef __GNUC__
- choke me
-#endif
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_compiler_gnu=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_compiler_gnu=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-ac_cv_c_compiler_gnu=$ac_compiler_gnu
-
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
-echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; }
-GCC=`test $ac_compiler_gnu = yes && echo yes`
-ac_test_CFLAGS=${CFLAGS+set}
-ac_save_CFLAGS=$CFLAGS
-{ echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
-echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; }
-if test "${ac_cv_prog_cc_g+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_save_c_werror_flag=$ac_c_werror_flag
- ac_c_werror_flag=yes
- ac_cv_prog_cc_g=no
- CFLAGS="-g"
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_cv_prog_cc_g=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- CFLAGS=""
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- :
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_c_werror_flag=$ac_save_c_werror_flag
- CFLAGS="-g"
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_cv_prog_cc_g=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- ac_c_werror_flag=$ac_save_c_werror_flag
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
-echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; }
-if test "$ac_test_CFLAGS" = set; then
- CFLAGS=$ac_save_CFLAGS
-elif test $ac_cv_prog_cc_g = yes; then
- if test "$GCC" = yes; then
- CFLAGS="-g -O2"
- else
- CFLAGS="-g"
- fi
-else
- if test "$GCC" = yes; then
- CFLAGS="-O2"
- else
- CFLAGS=
- fi
-fi
-{ echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5
-echo $ECHO_N "checking for $CC option to accept ISO C89... $ECHO_C" >&6; }
-if test "${ac_cv_prog_cc_c89+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_cv_prog_cc_c89=no
-ac_save_CC=$CC
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <stdarg.h>
-#include <stdio.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
-struct buf { int x; };
-FILE * (*rcsopen) (struct buf *, struct stat *, int);
-static char *e (p, i)
- char **p;
- int i;
-{
- return p[i];
-}
-static char *f (char * (*g) (char **, int), char **p, ...)
-{
- char *s;
- va_list v;
- va_start (v,p);
- s = g (p, va_arg (v,int));
- va_end (v);
- return s;
-}
-
-/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
- function prototypes and stuff, but not '\xHH' hex character constants.
- These don't provoke an error unfortunately, instead are silently treated
- as 'x'. The following induces an error, until -std is added to get
- proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
- array size at least. It's necessary to write '\x00'==0 to get something
- that's true only with -std. */
-int osf4_cc_array ['\x00' == 0 ? 1 : -1];
-
-/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
- inside strings and character constants. */
-#define FOO(x) 'x'
-int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
-
-int test (int i, double x);
-struct s1 {int (*f) (int a);};
-struct s2 {int (*f) (double a);};
-int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
-int argc;
-char **argv;
-int
-main ()
-{
-return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
- ;
- return 0;
-}
-_ACEOF
-for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
- -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
-do
- CC="$ac_save_CC $ac_arg"
- rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_cv_prog_cc_c89=$ac_arg
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext
- test "x$ac_cv_prog_cc_c89" != "xno" && break
-done
-rm -f conftest.$ac_ext
-CC=$ac_save_CC
-
-fi
-# AC_CACHE_VAL
-case "x$ac_cv_prog_cc_c89" in
- x)
- { echo "$as_me:$LINENO: result: none needed" >&5
-echo "${ECHO_T}none needed" >&6; } ;;
- xno)
- { echo "$as_me:$LINENO: result: unsupported" >&5
-echo "${ECHO_T}unsupported" >&6; } ;;
- *)
- CC="$CC $ac_cv_prog_cc_c89"
- { echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5
-echo "${ECHO_T}$ac_cv_prog_cc_c89" >&6; } ;;
-esac
-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-# Find a good install program. We prefer a C program (faster),
-# so one script is as good as another. But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AmigaOS /C/install, which installs bootblocks on floppy discs
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# OS/2's system install, which has a completely different semantic
-# ./install, which can be erroneously created by make from ./install.sh.
-{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
-echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; }
-if test -z "$INSTALL"; then
-if test "${ac_cv_path_install+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- # Account for people who put trailing slashes in PATH elements.
-case $as_dir/ in
- ./ | .// | /cC/* | \
- /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
- ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \
- /usr/ucb/* ) ;;
- *)
- # OSF1 and SCO ODT 3.0 have their own names for install.
- # Don't use installbsd from OSF since it installs stuff as root
- # by default.
- for ac_prog in ginstall scoinst install; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
- if test $ac_prog = install &&
- grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
- # AIX install. It has an incompatible calling convention.
- :
- elif test $ac_prog = install &&
- grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
- # program-specific install script used by HP pwplus--don't use.
- :
- else
- ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
- break 3
- fi
- fi
- done
- done
- ;;
-esac
-done
-IFS=$as_save_IFS
-
-
-fi
- if test "${ac_cv_path_install+set}" = set; then
- INSTALL=$ac_cv_path_install
- else
- # As a last resort, use the slow shell script. Don't cache a
- # value for INSTALL within a source directory, because that will
- # break other packages using the cache if that directory is
- # removed, or if the value is a relative name.
- INSTALL=$ac_install_sh
- fi
-fi
-{ echo "$as_me:$LINENO: result: $INSTALL" >&5
-echo "${ECHO_T}$INSTALL" >&6; }
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-# Check whether --enable-shared was given.
-if test "${enable_shared+set}" = set; then
- enableval=$enable_shared; p=${PACKAGE-default}
- case $enableval in
- yes) enable_shared=yes ;;
- no) enable_shared=no ;;
- *)
- enable_shared=no
- # Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
- for pkg in $enableval; do
- IFS="$lt_save_ifs"
- if test "X$pkg" = "X$p"; then
- enable_shared=yes
- fi
- done
- IFS="$lt_save_ifs"
- ;;
- esac
-else
- enable_shared=yes
-fi
-
-
-# Check whether --enable-static was given.
-if test "${enable_static+set}" = set; then
- enableval=$enable_static; p=${PACKAGE-default}
- case $enableval in
- yes) enable_static=yes ;;
- no) enable_static=no ;;
- *)
- enable_static=no
- # Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
- for pkg in $enableval; do
- IFS="$lt_save_ifs"
- if test "X$pkg" = "X$p"; then
- enable_static=yes
- fi
- done
- IFS="$lt_save_ifs"
- ;;
- esac
-else
- enable_static=yes
-fi
-
-
-# Check whether --enable-fast-install was given.
-if test "${enable_fast_install+set}" = set; then
- enableval=$enable_fast_install; p=${PACKAGE-default}
- case $enableval in
- yes) enable_fast_install=yes ;;
- no) enable_fast_install=no ;;
- *)
- enable_fast_install=no
- # Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
- for pkg in $enableval; do
- IFS="$lt_save_ifs"
- if test "X$pkg" = "X$p"; then
- enable_fast_install=yes
- fi
- done
- IFS="$lt_save_ifs"
- ;;
- esac
-else
- enable_fast_install=yes
-fi
-
-
-# Make sure we can run config.sub.
-$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
- { { echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5
-echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;}
- { (exit 1); exit 1; }; }
-
-{ echo "$as_me:$LINENO: checking build system type" >&5
-echo $ECHO_N "checking build system type... $ECHO_C" >&6; }
-if test "${ac_cv_build+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_build_alias=$build_alias
-test "x$ac_build_alias" = x &&
- ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
-test "x$ac_build_alias" = x &&
- { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5
-echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
- { (exit 1); exit 1; }; }
-ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
- { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5
-echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;}
- { (exit 1); exit 1; }; }
-
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_build" >&5
-echo "${ECHO_T}$ac_cv_build" >&6; }
-case $ac_cv_build in
-*-*-*) ;;
-*) { { echo "$as_me:$LINENO: error: invalid value of canonical build" >&5
-echo "$as_me: error: invalid value of canonical build" >&2;}
- { (exit 1); exit 1; }; };;
-esac
-build=$ac_cv_build
-ac_save_IFS=$IFS; IFS='-'
-set x $ac_cv_build
-shift
-build_cpu=$1
-build_vendor=$2
-shift; shift
-# Remember, the first character of IFS is used to create $*,
-# except with old shells:
-build_os=$*
-IFS=$ac_save_IFS
-case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
-
-
-{ echo "$as_me:$LINENO: checking host system type" >&5
-echo $ECHO_N "checking host system type... $ECHO_C" >&6; }
-if test "${ac_cv_host+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test "x$host_alias" = x; then
- ac_cv_host=$ac_cv_build
-else
- ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
- { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5
-echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_host" >&5
-echo "${ECHO_T}$ac_cv_host" >&6; }
-case $ac_cv_host in
-*-*-*) ;;
-*) { { echo "$as_me:$LINENO: error: invalid value of canonical host" >&5
-echo "$as_me: error: invalid value of canonical host" >&2;}
- { (exit 1); exit 1; }; };;
-esac
-host=$ac_cv_host
-ac_save_IFS=$IFS; IFS='-'
-set x $ac_cv_host
-shift
-host_cpu=$1
-host_vendor=$2
-shift; shift
-# Remember, the first character of IFS is used to create $*,
-# except with old shells:
-host_os=$*
-IFS=$ac_save_IFS
-case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
-
-
-{ echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5
-echo $ECHO_N "checking for a sed that does not truncate output... $ECHO_C" >&6; }
-if test "${lt_cv_path_SED+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- # Loop through the user's path and test for sed and gsed.
-# Then use that list of sed's as ones to test for truncation.
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for lt_ac_prog in sed gsed; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$lt_ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$lt_ac_prog$ac_exec_ext"; }; then
- lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
- fi
- done
- done
-done
-IFS=$as_save_IFS
-lt_ac_max=0
-lt_ac_count=0
-# Add /usr/xpg4/bin/sed as it is typically found on Solaris
-# along with /bin/sed that truncates output.
-for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
- test ! -f $lt_ac_sed && continue
- cat /dev/null > conftest.in
- lt_ac_count=0
- echo $ECHO_N "0123456789$ECHO_C" >conftest.in
- # Check for GNU sed and select it if it is found.
- if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
- lt_cv_path_SED=$lt_ac_sed
- break
- fi
- while true; do
- cat conftest.in conftest.in >conftest.tmp
- mv conftest.tmp conftest.in
- cp conftest.in conftest.nl
- echo >>conftest.nl
- $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
- cmp -s conftest.out conftest.nl || break
- # 10000 chars as input seems more than enough
- test $lt_ac_count -gt 10 && break
- lt_ac_count=`expr $lt_ac_count + 1`
- if test $lt_ac_count -gt $lt_ac_max; then
- lt_ac_max=$lt_ac_count
- lt_cv_path_SED=$lt_ac_sed
- fi
- done
-done
-
-fi
-
-SED=$lt_cv_path_SED
-
-{ echo "$as_me:$LINENO: result: $SED" >&5
-echo "${ECHO_T}$SED" >&6; }
-
-{ echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5
-echo $ECHO_N "checking for grep that handles long lines and -e... $ECHO_C" >&6; }
-if test "${ac_cv_path_GREP+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- # Extract the first word of "grep ggrep" to use in msg output
-if test -z "$GREP"; then
-set dummy grep ggrep; ac_prog_name=$2
-if test "${ac_cv_path_GREP+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_path_GREP_found=false
-# Loop through the user's path and test for each of PROGNAME-LIST
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_prog in grep ggrep; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
- { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
- # Check for GNU ac_path_GREP and select it if it is found.
- # Check for GNU $ac_path_GREP
-case `"$ac_path_GREP" --version 2>&1` in
-*GNU*)
- ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
-*)
- ac_count=0
- echo $ECHO_N "0123456789$ECHO_C" >"conftest.in"
- while :
- do
- cat "conftest.in" "conftest.in" >"conftest.tmp"
- mv "conftest.tmp" "conftest.in"
- cp "conftest.in" "conftest.nl"
- echo 'GREP' >> "conftest.nl"
- "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
- diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
- ac_count=`expr $ac_count + 1`
- if test $ac_count -gt ${ac_path_GREP_max-0}; then
- # Best one so far, save it but keep looking for a better one
- ac_cv_path_GREP="$ac_path_GREP"
- ac_path_GREP_max=$ac_count
- fi
- # 10*(2^10) chars as input seems more than enough
- test $ac_count -gt 10 && break
- done
- rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
-esac
-
-
- $ac_path_GREP_found && break 3
- done
-done
-
-done
-IFS=$as_save_IFS
-
-
-fi
-
-GREP="$ac_cv_path_GREP"
-if test -z "$GREP"; then
- { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
-echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-else
- ac_cv_path_GREP=$GREP
-fi
-
-
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5
-echo "${ECHO_T}$ac_cv_path_GREP" >&6; }
- GREP="$ac_cv_path_GREP"
-
-
-{ echo "$as_me:$LINENO: checking for egrep" >&5
-echo $ECHO_N "checking for egrep... $ECHO_C" >&6; }
-if test "${ac_cv_path_EGREP+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
- then ac_cv_path_EGREP="$GREP -E"
- else
- # Extract the first word of "egrep" to use in msg output
-if test -z "$EGREP"; then
-set dummy egrep; ac_prog_name=$2
-if test "${ac_cv_path_EGREP+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_path_EGREP_found=false
-# Loop through the user's path and test for each of PROGNAME-LIST
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_prog in egrep; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
- { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue
- # Check for GNU ac_path_EGREP and select it if it is found.
- # Check for GNU $ac_path_EGREP
-case `"$ac_path_EGREP" --version 2>&1` in
-*GNU*)
- ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
-*)
- ac_count=0
- echo $ECHO_N "0123456789$ECHO_C" >"conftest.in"
- while :
- do
- cat "conftest.in" "conftest.in" >"conftest.tmp"
- mv "conftest.tmp" "conftest.in"
- cp "conftest.in" "conftest.nl"
- echo 'EGREP' >> "conftest.nl"
- "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
- diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
- ac_count=`expr $ac_count + 1`
- if test $ac_count -gt ${ac_path_EGREP_max-0}; then
- # Best one so far, save it but keep looking for a better one
- ac_cv_path_EGREP="$ac_path_EGREP"
- ac_path_EGREP_max=$ac_count
- fi
- # 10*(2^10) chars as input seems more than enough
- test $ac_count -gt 10 && break
- done
- rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
-esac
-
-
- $ac_path_EGREP_found && break 3
- done
-done
-
-done
-IFS=$as_save_IFS
-
-
-fi
-
-EGREP="$ac_cv_path_EGREP"
-if test -z "$EGREP"; then
- { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
-echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-else
- ac_cv_path_EGREP=$EGREP
-fi
-
-
- fi
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5
-echo "${ECHO_T}$ac_cv_path_EGREP" >&6; }
- EGREP="$ac_cv_path_EGREP"
-
-
-
-# Check whether --with-gnu-ld was given.
-if test "${with_gnu_ld+set}" = set; then
- withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
-else
- with_gnu_ld=no
-fi
-
-ac_prog=ld
-if test "$GCC" = yes; then
- # Check if gcc -print-prog-name=ld gives a path.
- { echo "$as_me:$LINENO: checking for ld used by $CC" >&5
-echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6; }
- case $host in
- *-*-mingw*)
- # gcc leaves a trailing carriage return which upsets mingw
- ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
- *)
- ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
- esac
- case $ac_prog in
- # Accept absolute paths.
- [\\/]* | ?:[\\/]*)
- re_direlt='/[^/][^/]*/\.\./'
- # Canonicalize the pathname of ld
- ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
- while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
- ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
- done
- test -z "$LD" && LD="$ac_prog"
- ;;
- "")
- # If it fails, then pretend we aren't using GCC.
- ac_prog=ld
- ;;
- *)
- # If it is relative, then search for the first ld in PATH.
- with_gnu_ld=unknown
- ;;
- esac
-elif test "$with_gnu_ld" = yes; then
- { echo "$as_me:$LINENO: checking for GNU ld" >&5
-echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6; }
-else
- { echo "$as_me:$LINENO: checking for non-GNU ld" >&5
-echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6; }
-fi
-if test "${lt_cv_path_LD+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -z "$LD"; then
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
- for ac_dir in $PATH; do
- IFS="$lt_save_ifs"
- test -z "$ac_dir" && ac_dir=.
- if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
- lt_cv_path_LD="$ac_dir/$ac_prog"
- # Check to see if the program is GNU ld. I'd rather use --version,
- # but apparently some variants of GNU ld only accept -v.
- # Break only if it was the GNU/non-GNU ld that we prefer.
- case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
- *GNU* | *'with BFD'*)
- test "$with_gnu_ld" != no && break
- ;;
- *)
- test "$with_gnu_ld" != yes && break
- ;;
- esac
- fi
- done
- IFS="$lt_save_ifs"
-else
- lt_cv_path_LD="$LD" # Let the user override the test with a path.
-fi
-fi
-
-LD="$lt_cv_path_LD"
-if test -n "$LD"; then
- { echo "$as_me:$LINENO: result: $LD" >&5
-echo "${ECHO_T}$LD" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5
-echo "$as_me: error: no acceptable ld found in \$PATH" >&2;}
- { (exit 1); exit 1; }; }
-{ echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5
-echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6; }
-if test "${lt_cv_prog_gnu_ld+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- # I'd rather use --version here, but apparently some GNU lds only accept -v.
-case `$LD -v 2>&1 </dev/null` in
-*GNU* | *'with BFD'*)
- lt_cv_prog_gnu_ld=yes
- ;;
-*)
- lt_cv_prog_gnu_ld=no
- ;;
-esac
-fi
-{ echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5
-echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6; }
-with_gnu_ld=$lt_cv_prog_gnu_ld
-
-
-{ echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5
-echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6; }
-if test "${lt_cv_ld_reload_flag+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- lt_cv_ld_reload_flag='-r'
-fi
-{ echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5
-echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6; }
-reload_flag=$lt_cv_ld_reload_flag
-case $reload_flag in
-"" | " "*) ;;
-*) reload_flag=" $reload_flag" ;;
-esac
-reload_cmds='$LD$reload_flag -o $output$reload_objs'
-case $host_os in
- darwin*)
- if test "$GCC" = yes; then
- reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
- else
- reload_cmds='$LD$reload_flag -o $output$reload_objs'
- fi
- ;;
-esac
-
-{ echo "$as_me:$LINENO: checking for BSD-compatible nm" >&5
-echo $ECHO_N "checking for BSD-compatible nm... $ECHO_C" >&6; }
-if test "${lt_cv_path_NM+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$NM"; then
- # Let the user override the test.
- lt_cv_path_NM="$NM"
-else
- lt_nm_to_check="${ac_tool_prefix}nm"
- if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
- lt_nm_to_check="$lt_nm_to_check nm"
- fi
- for lt_tmp_nm in $lt_nm_to_check; do
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
- for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
- IFS="$lt_save_ifs"
- test -z "$ac_dir" && ac_dir=.
- tmp_nm="$ac_dir/$lt_tmp_nm"
- if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
- # Check to see if the nm accepts a BSD-compat flag.
- # Adding the `sed 1q' prevents false positives on HP-UX, which says:
- # nm: unknown option "B" ignored
- # Tru64's nm complains that /dev/null is an invalid object file
- case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
- */dev/null* | *'Invalid file or object type'*)
- lt_cv_path_NM="$tmp_nm -B"
- break
- ;;
- *)
- case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
- */dev/null*)
- lt_cv_path_NM="$tmp_nm -p"
- break
- ;;
- *)
- lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
- continue # so that we can try to find one that supports BSD flags
- ;;
- esac
- ;;
- esac
- fi
- done
- IFS="$lt_save_ifs"
- done
- test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
-fi
-fi
-{ echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5
-echo "${ECHO_T}$lt_cv_path_NM" >&6; }
-NM="$lt_cv_path_NM"
-
-{ echo "$as_me:$LINENO: checking whether ln -s works" >&5
-echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6; }
-LN_S=$as_ln_s
-if test "$LN_S" = "ln -s"; then
- { echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6; }
-else
- { echo "$as_me:$LINENO: result: no, using $LN_S" >&5
-echo "${ECHO_T}no, using $LN_S" >&6; }
-fi
-
-{ echo "$as_me:$LINENO: checking how to recognize dependent libraries" >&5
-echo $ECHO_N "checking how to recognize dependent libraries... $ECHO_C" >&6; }
-if test "${lt_cv_deplibs_check_method+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- lt_cv_file_magic_cmd='$MAGIC_CMD'
-lt_cv_file_magic_test_file=
-lt_cv_deplibs_check_method='unknown'
-# Need to set the preceding variable on all platforms that support
-# interlibrary dependencies.
-# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
-# 'pass_all' -- all dependencies passed with no checks.
-# 'test_compile' -- check by making test program.
-# 'file_magic [[regex]]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given extended regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
-
-case $host_os in
-aix4* | aix5*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-beos*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-bsdi[45]*)
- lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
- lt_cv_file_magic_cmd='/usr/bin/file -L'
- lt_cv_file_magic_test_file=/shlib/libc.so
- ;;
-
-cygwin*)
- # func_win32_libid is a shell function defined in ltmain.sh
- lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
- lt_cv_file_magic_cmd='func_win32_libid'
- ;;
-
-mingw* | pw32*)
- # Base MSYS/MinGW do not provide the 'file' command needed by
- # func_win32_libid shell function, so use a weaker test based on 'objdump',
- # unless we find 'file', for example because we are cross-compiling.
- if ( file / ) >/dev/null 2>&1; then
- lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
- lt_cv_file_magic_cmd='func_win32_libid'
- else
- lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
- lt_cv_file_magic_cmd='$OBJDUMP -f'
- fi
- ;;
-
-darwin* | rhapsody*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-freebsd* | dragonfly*)
- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
- case $host_cpu in
- i*86 )
- # Not sure whether the presence of OpenBSD here was a mistake.
- # Let's accept both of them until this is cleared up.
- lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library'
- lt_cv_file_magic_cmd=/usr/bin/file
- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
- ;;
- esac
- else
- lt_cv_deplibs_check_method=pass_all
- fi
- ;;
-
-gnu*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-hpux10.20* | hpux11*)
- lt_cv_file_magic_cmd=/usr/bin/file
- case $host_cpu in
- ia64*)
- lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
- lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
- ;;
- hppa*64*)
- lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]'
- lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
- ;;
- *)
- lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
- lt_cv_file_magic_test_file=/usr/lib/libc.sl
- ;;
- esac
- ;;
-
-interix[3-9]*)
- # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
- lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$'
- ;;
-
-irix5* | irix6* | nonstopux*)
- case $LD in
- *-32|*"-32 ") libmagic=32-bit;;
- *-n32|*"-n32 ") libmagic=N32;;
- *-64|*"-64 ") libmagic=64-bit;;
- *) libmagic=never-match;;
- esac
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-# This must be Linux ELF.
-linux* | k*bsd*-gnu)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-netbsd*)
- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
- lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
- else
- lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$'
- fi
- ;;
-
-newos6*)
- lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
- lt_cv_file_magic_cmd=/usr/bin/file
- lt_cv_file_magic_test_file=/usr/lib/libnls.so
- ;;
-
-nto-qnx*)
- lt_cv_deplibs_check_method=unknown
- ;;
-
-openbsd*)
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$'
- else
- lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
- fi
- ;;
-
-osf3* | osf4* | osf5*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-rdos*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-solaris*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-sysv4 | sysv4.3*)
- case $host_vendor in
- motorola)
- lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
- ;;
- ncr)
- lt_cv_deplibs_check_method=pass_all
- ;;
- sequent)
- lt_cv_file_magic_cmd='/bin/file'
- lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
- ;;
- sni)
- lt_cv_file_magic_cmd='/bin/file'
- lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib"
- lt_cv_file_magic_test_file=/lib/libc.so
- ;;
- siemens)
- lt_cv_deplibs_check_method=pass_all
- ;;
- pc)
- lt_cv_deplibs_check_method=pass_all
- ;;
- esac
- ;;
-
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-esac
-
-fi
-{ echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5
-echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6; }
-file_magic_cmd=$lt_cv_file_magic_cmd
-deplibs_check_method=$lt_cv_deplibs_check_method
-test -z "$deplibs_check_method" && deplibs_check_method=unknown
-
-
-
-
-# If no C compiler was specified, use CC.
-LTCC=${LTCC-"$CC"}
-
-# If no C compiler flags were specified, use CFLAGS.
-LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-
-# Allow CC to be a program name with arguments.
-compiler=$CC
-
-
-# Check whether --enable-libtool-lock was given.
-if test "${enable_libtool_lock+set}" = set; then
- enableval=$enable_libtool_lock;
-fi
-
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
-
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case $host in
-ia64-*-hpux*)
- # Find out which ABI we are using.
- echo 'int i;' > conftest.$ac_ext
- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
- case `/usr/bin/file conftest.$ac_objext` in
- *ELF-32*)
- HPUX_IA64_MODE="32"
- ;;
- *ELF-64*)
- HPUX_IA64_MODE="64"
- ;;
- esac
- fi
- rm -rf conftest*
- ;;
-*-*-irix6*)
- # Find out which ABI we are using.
- echo '#line 3812 "configure"' > conftest.$ac_ext
- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
- if test "$lt_cv_prog_gnu_ld" = yes; then
- case `/usr/bin/file conftest.$ac_objext` in
- *32-bit*)
- LD="${LD-ld} -melf32bsmip"
- ;;
- *N32*)
- LD="${LD-ld} -melf32bmipn32"
- ;;
- *64-bit*)
- LD="${LD-ld} -melf64bmip"
- ;;
- esac
- else
- case `/usr/bin/file conftest.$ac_objext` in
- *32-bit*)
- LD="${LD-ld} -32"
- ;;
- *N32*)
- LD="${LD-ld} -n32"
- ;;
- *64-bit*)
- LD="${LD-ld} -64"
- ;;
- esac
- fi
- fi
- rm -rf conftest*
- ;;
-
-x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
-s390*-*linux*|sparc*-*linux*)
- # Find out which ABI we are using.
- echo 'int i;' > conftest.$ac_ext
- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
- case `/usr/bin/file conftest.o` in
- *32-bit*)
- case $host in
- x86_64-*kfreebsd*-gnu)
- LD="${LD-ld} -m elf_i386_fbsd"
- ;;
- x86_64-*linux*)
- LD="${LD-ld} -m elf_i386"
- ;;
- ppc64-*linux*|powerpc64-*linux*)
- LD="${LD-ld} -m elf32ppclinux"
- ;;
- s390x-*linux*)
- LD="${LD-ld} -m elf_s390"
- ;;
- sparc64-*linux*)
- LD="${LD-ld} -m elf32_sparc"
- ;;
- esac
- ;;
- *64-bit*)
- case $host in
- x86_64-*kfreebsd*-gnu)
- LD="${LD-ld} -m elf_x86_64_fbsd"
- ;;
- x86_64-*linux*)
- LD="${LD-ld} -m elf_x86_64"
- ;;
- ppc*-*linux*|powerpc*-*linux*)
- LD="${LD-ld} -m elf64ppc"
- ;;
- s390*-*linux*)
- LD="${LD-ld} -m elf64_s390"
- ;;
- sparc*-*linux*)
- LD="${LD-ld} -m elf64_sparc"
- ;;
- esac
- ;;
- esac
- fi
- rm -rf conftest*
- ;;
-
-*-*-sco3.2v5*)
- # On SCO OpenServer 5, we need -belf to get full-featured binaries.
- SAVE_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS -belf"
- { echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5
-echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6; }
-if test "${lt_cv_cc_needs_belf+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext &&
- $as_test_x conftest$ac_exeext; then
- lt_cv_cc_needs_belf=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- lt_cv_cc_needs_belf=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
- ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-fi
-{ echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5
-echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6; }
- if test x"$lt_cv_cc_needs_belf" != x"yes"; then
- # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
- CFLAGS="$SAVE_CFLAGS"
- fi
- ;;
-sparc*-*solaris*)
- # Find out which ABI we are using.
- echo 'int i;' > conftest.$ac_ext
- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
- case `/usr/bin/file conftest.o` in
- *64-bit*)
- case $lt_cv_prog_gnu_ld in
- yes*) LD="${LD-ld} -m elf64_sparc" ;;
- *) LD="${LD-ld} -64" ;;
- esac
- ;;
- esac
- fi
- rm -rf conftest*
- ;;
-
-
-esac
-
-need_locks="$enable_libtool_lock"
-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-{ echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
-echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6; }
-# On Suns, sometimes $CPP names a directory.
-if test -n "$CPP" && test -d "$CPP"; then
- CPP=
-fi
-if test -z "$CPP"; then
- if test "${ac_cv_prog_CPP+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- # Double quotes because CPP needs to be expanded
- for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
- do
- ac_preproc_ok=false
-for ac_c_preproc_warn_flag in '' yes
-do
- # Use a header file that comes with gcc, so configuring glibc
- # with a fresh cross-compiler works.
- # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- # <limits.h> exists even on freestanding compilers.
- # On the NeXT, cc -E runs the code through the compiler's parser,
- # not just through cpp. "Syntax error" is here to catch this case.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
- Syntax error
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null && {
- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
- test ! -s conftest.err
- }; then
- :
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- # Broken: fails on valid input.
-continue
-fi
-
-rm -f conftest.err conftest.$ac_ext
-
- # OK, works on sane cases. Now check whether nonexistent headers
- # can be detected and how.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <ac_nonexistent.h>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null && {
- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
- test ! -s conftest.err
- }; then
- # Broken: success on invalid input.
-continue
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- # Passes both tests.
-ac_preproc_ok=:
-break
-fi
-
-rm -f conftest.err conftest.$ac_ext
-
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then
- break
-fi
-
- done
- ac_cv_prog_CPP=$CPP
-
-fi
- CPP=$ac_cv_prog_CPP
-else
- ac_cv_prog_CPP=$CPP
-fi
-{ echo "$as_me:$LINENO: result: $CPP" >&5
-echo "${ECHO_T}$CPP" >&6; }
-ac_preproc_ok=false
-for ac_c_preproc_warn_flag in '' yes
-do
- # Use a header file that comes with gcc, so configuring glibc
- # with a fresh cross-compiler works.
- # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- # <limits.h> exists even on freestanding compilers.
- # On the NeXT, cc -E runs the code through the compiler's parser,
- # not just through cpp. "Syntax error" is here to catch this case.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
- Syntax error
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null && {
- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
- test ! -s conftest.err
- }; then
- :
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- # Broken: fails on valid input.
-continue
-fi
-
-rm -f conftest.err conftest.$ac_ext
-
- # OK, works on sane cases. Now check whether nonexistent headers
- # can be detected and how.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <ac_nonexistent.h>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null && {
- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
- test ! -s conftest.err
- }; then
- # Broken: success on invalid input.
-continue
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- # Passes both tests.
-ac_preproc_ok=:
-break
-fi
-
-rm -f conftest.err conftest.$ac_ext
-
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then
- :
-else
- { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check
-See \`config.log' for more details." >&5
-echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check
-See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-{ echo "$as_me:$LINENO: checking for ANSI C header files" >&5
-echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6; }
-if test "${ac_cv_header_stdc+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <stdlib.h>
-#include <stdarg.h>
-#include <string.h>
-#include <float.h>
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_cv_header_stdc=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_header_stdc=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-
-if test $ac_cv_header_stdc = yes; then
- # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <string.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- $EGREP "memchr" >/dev/null 2>&1; then
- :
-else
- ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-fi
-
-if test $ac_cv_header_stdc = yes; then
- # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <stdlib.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- $EGREP "free" >/dev/null 2>&1; then
- :
-else
- ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-fi
-
-if test $ac_cv_header_stdc = yes; then
- # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
- if test "$cross_compiling" = yes; then
- :
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <ctype.h>
-#include <stdlib.h>
-#if ((' ' & 0x0FF) == 0x020)
-# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
-# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
-#else
-# define ISLOWER(c) \
- (('a' <= (c) && (c) <= 'i') \
- || ('j' <= (c) && (c) <= 'r') \
- || ('s' <= (c) && (c) <= 'z'))
-# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
-#endif
-
-#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
-int
-main ()
-{
- int i;
- for (i = 0; i < 256; i++)
- if (XOR (islower (i), ISLOWER (i))
- || toupper (i) != TOUPPER (i))
- return 2;
- return 0;
-}
-_ACEOF
-rm -f conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- :
-else
- echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
-ac_cv_header_stdc=no
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-
-
-fi
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
-echo "${ECHO_T}$ac_cv_header_stdc" >&6; }
-if test $ac_cv_header_stdc = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define STDC_HEADERS 1
-_ACEOF
-
-fi
-
-# On IRIX 5.3, sys/types and inttypes.h are conflicting.
-
-
-
-
-
-
-
-
-
-for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
- inttypes.h stdint.h unistd.h
-do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-{ echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- eval "$as_ac_Header=yes"
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- eval "$as_ac_Header=no"
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
- cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-
-done
-
-
-
-for ac_header in dlfcn.h
-do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- { echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-else
- # Is the header compilable?
-{ echo "$as_me:$LINENO: checking $ac_header usability" >&5
-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_header_compiler=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_header_compiler=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-echo "${ECHO_T}$ac_header_compiler" >&6; }
-
-# Is the header present?
-{ echo "$as_me:$LINENO: checking $ac_header presence" >&5
-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <$ac_header>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null && {
- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
- test ! -s conftest.err
- }; then
- ac_header_preproc=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_header_preproc=no
-fi
-
-rm -f conftest.err conftest.$ac_ext
-{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-echo "${ECHO_T}$ac_header_preproc" >&6; }
-
-# So? What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
- yes:no: )
- { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
- ac_header_preproc=yes
- ;;
- no:yes:* )
- { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
-echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
-echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
- ( cat <<\_ASBOX
-## ----------------------------------------------- ##
-## Report this to trustedbsd-audit at TrustesdBSD.org ##
-## ----------------------------------------------- ##
-_ASBOX
- ) | sed "s/^/$as_me: WARNING: /" >&2
- ;;
-esac
-{ echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- eval "$as_ac_Header=\$ac_header_preproc"
-fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-
-fi
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
- cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-
-done
-
-ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-if test -z "$CXX"; then
- if test -n "$CCC"; then
- CXX=$CCC
- else
- if test -n "$ac_tool_prefix"; then
- for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC
- do
- # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_CXX+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$CXX"; then
- ac_cv_prog_CXX="$CXX" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_CXX="$ac_tool_prefix$ac_prog"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-CXX=$ac_cv_prog_CXX
-if test -n "$CXX"; then
- { echo "$as_me:$LINENO: result: $CXX" >&5
-echo "${ECHO_T}$CXX" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
- test -n "$CXX" && break
- done
-fi
-if test -z "$CXX"; then
- ac_ct_CXX=$CXX
- for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$ac_ct_CXX"; then
- ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_CXX="$ac_prog"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_CXX=$ac_cv_prog_ac_ct_CXX
-if test -n "$ac_ct_CXX"; then
- { echo "$as_me:$LINENO: result: $ac_ct_CXX" >&5
-echo "${ECHO_T}$ac_ct_CXX" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
- test -n "$ac_ct_CXX" && break
-done
-
- if test "x$ac_ct_CXX" = x; then
- CXX="g++"
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf at gnu.org." >&5
-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf at gnu.org." >&2;}
-ac_tool_warned=yes ;;
-esac
- CXX=$ac_ct_CXX
- fi
-fi
-
- fi
-fi
-# Provide some information about the compiler.
-echo "$as_me:$LINENO: checking for C++ compiler version" >&5
-ac_compiler=`set X $ac_compile; echo $2`
-{ (ac_try="$ac_compiler --version >&5"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compiler --version >&5") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
-{ (ac_try="$ac_compiler -v >&5"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compiler -v >&5") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
-{ (ac_try="$ac_compiler -V >&5"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compiler -V >&5") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
-
-{ echo "$as_me:$LINENO: checking whether we are using the GNU C++ compiler" >&5
-echo $ECHO_N "checking whether we are using the GNU C++ compiler... $ECHO_C" >&6; }
-if test "${ac_cv_cxx_compiler_gnu+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-#ifndef __GNUC__
- choke me
-#endif
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_cxx_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_compiler_gnu=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_compiler_gnu=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-ac_cv_cxx_compiler_gnu=$ac_compiler_gnu
-
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_cxx_compiler_gnu" >&5
-echo "${ECHO_T}$ac_cv_cxx_compiler_gnu" >&6; }
-GXX=`test $ac_compiler_gnu = yes && echo yes`
-ac_test_CXXFLAGS=${CXXFLAGS+set}
-ac_save_CXXFLAGS=$CXXFLAGS
-{ echo "$as_me:$LINENO: checking whether $CXX accepts -g" >&5
-echo $ECHO_N "checking whether $CXX accepts -g... $ECHO_C" >&6; }
-if test "${ac_cv_prog_cxx_g+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_save_cxx_werror_flag=$ac_cxx_werror_flag
- ac_cxx_werror_flag=yes
- ac_cv_prog_cxx_g=no
- CXXFLAGS="-g"
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_cxx_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_cv_prog_cxx_g=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- CXXFLAGS=""
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_cxx_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- :
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cxx_werror_flag=$ac_save_cxx_werror_flag
- CXXFLAGS="-g"
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_cxx_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_cv_prog_cxx_g=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- ac_cxx_werror_flag=$ac_save_cxx_werror_flag
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_prog_cxx_g" >&5
-echo "${ECHO_T}$ac_cv_prog_cxx_g" >&6; }
-if test "$ac_test_CXXFLAGS" = set; then
- CXXFLAGS=$ac_save_CXXFLAGS
-elif test $ac_cv_prog_cxx_g = yes; then
- if test "$GXX" = yes; then
- CXXFLAGS="-g -O2"
- else
- CXXFLAGS="-g"
- fi
-else
- if test "$GXX" = yes; then
- CXXFLAGS="-O2"
- else
- CXXFLAGS=
- fi
-fi
-ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
-
-
-if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
- ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
- (test "X$CXX" != "Xg++"))) ; then
- ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-{ echo "$as_me:$LINENO: checking how to run the C++ preprocessor" >&5
-echo $ECHO_N "checking how to run the C++ preprocessor... $ECHO_C" >&6; }
-if test -z "$CXXCPP"; then
- if test "${ac_cv_prog_CXXCPP+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- # Double quotes because CXXCPP needs to be expanded
- for CXXCPP in "$CXX -E" "/lib/cpp"
- do
- ac_preproc_ok=false
-for ac_cxx_preproc_warn_flag in '' yes
-do
- # Use a header file that comes with gcc, so configuring glibc
- # with a fresh cross-compiler works.
- # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- # <limits.h> exists even on freestanding compilers.
- # On the NeXT, cc -E runs the code through the compiler's parser,
- # not just through cpp. "Syntax error" is here to catch this case.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
- Syntax error
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null && {
- test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" ||
- test ! -s conftest.err
- }; then
- :
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- # Broken: fails on valid input.
-continue
-fi
-
-rm -f conftest.err conftest.$ac_ext
-
- # OK, works on sane cases. Now check whether nonexistent headers
- # can be detected and how.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <ac_nonexistent.h>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null && {
- test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" ||
- test ! -s conftest.err
- }; then
- # Broken: success on invalid input.
-continue
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- # Passes both tests.
-ac_preproc_ok=:
-break
-fi
-
-rm -f conftest.err conftest.$ac_ext
-
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then
- break
-fi
-
- done
- ac_cv_prog_CXXCPP=$CXXCPP
-
-fi
- CXXCPP=$ac_cv_prog_CXXCPP
-else
- ac_cv_prog_CXXCPP=$CXXCPP
-fi
-{ echo "$as_me:$LINENO: result: $CXXCPP" >&5
-echo "${ECHO_T}$CXXCPP" >&6; }
-ac_preproc_ok=false
-for ac_cxx_preproc_warn_flag in '' yes
-do
- # Use a header file that comes with gcc, so configuring glibc
- # with a fresh cross-compiler works.
- # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- # <limits.h> exists even on freestanding compilers.
- # On the NeXT, cc -E runs the code through the compiler's parser,
- # not just through cpp. "Syntax error" is here to catch this case.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
- Syntax error
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null && {
- test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" ||
- test ! -s conftest.err
- }; then
- :
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- # Broken: fails on valid input.
-continue
-fi
-
-rm -f conftest.err conftest.$ac_ext
-
- # OK, works on sane cases. Now check whether nonexistent headers
- # can be detected and how.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <ac_nonexistent.h>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null && {
- test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" ||
- test ! -s conftest.err
- }; then
- # Broken: success on invalid input.
-continue
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- # Passes both tests.
-ac_preproc_ok=:
-break
-fi
-
-rm -f conftest.err conftest.$ac_ext
-
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then
- :
-else
- { { echo "$as_me:$LINENO: error: C++ preprocessor \"$CXXCPP\" fails sanity check
-See \`config.log' for more details." >&5
-echo "$as_me: error: C++ preprocessor \"$CXXCPP\" fails sanity check
-See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
-fi
-
-
-ac_ext=f
-ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5'
-ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_f77_compiler_gnu
-if test -n "$ac_tool_prefix"; then
- for ac_prog in g77 xlf f77 frt pgf77 cf77 fort77 fl32 af77 xlf90 f90 pgf90 pghpf epcf90 gfortran g95 xlf95 f95 fort ifort ifc efc pgf95 lf95 ftn
- do
- # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_F77+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$F77"; then
- ac_cv_prog_F77="$F77" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_F77="$ac_tool_prefix$ac_prog"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-F77=$ac_cv_prog_F77
-if test -n "$F77"; then
- { echo "$as_me:$LINENO: result: $F77" >&5
-echo "${ECHO_T}$F77" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
- test -n "$F77" && break
- done
-fi
-if test -z "$F77"; then
- ac_ct_F77=$F77
- for ac_prog in g77 xlf f77 frt pgf77 cf77 fort77 fl32 af77 xlf90 f90 pgf90 pghpf epcf90 gfortran g95 xlf95 f95 fort ifort ifc efc pgf95 lf95 ftn
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_ac_ct_F77+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$ac_ct_F77"; then
- ac_cv_prog_ac_ct_F77="$ac_ct_F77" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_F77="$ac_prog"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_F77=$ac_cv_prog_ac_ct_F77
-if test -n "$ac_ct_F77"; then
- { echo "$as_me:$LINENO: result: $ac_ct_F77" >&5
-echo "${ECHO_T}$ac_ct_F77" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
- test -n "$ac_ct_F77" && break
-done
-
- if test "x$ac_ct_F77" = x; then
- F77=""
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf at gnu.org." >&5
-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf at gnu.org." >&2;}
-ac_tool_warned=yes ;;
-esac
- F77=$ac_ct_F77
- fi
-fi
-
-
-# Provide some information about the compiler.
-echo "$as_me:$LINENO: checking for Fortran 77 compiler version" >&5
-ac_compiler=`set X $ac_compile; echo $2`
-{ (ac_try="$ac_compiler --version >&5"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compiler --version >&5") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
-{ (ac_try="$ac_compiler -v >&5"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compiler -v >&5") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
-{ (ac_try="$ac_compiler -V >&5"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compiler -V >&5") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
-rm -f a.out
-
-# If we don't use `.F' as extension, the preprocessor is not run on the
-# input file. (Note that this only needs to work for GNU compilers.)
-ac_save_ext=$ac_ext
-ac_ext=F
-{ echo "$as_me:$LINENO: checking whether we are using the GNU Fortran 77 compiler" >&5
-echo $ECHO_N "checking whether we are using the GNU Fortran 77 compiler... $ECHO_C" >&6; }
-if test "${ac_cv_f77_compiler_gnu+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
- program main
-#ifndef __GNUC__
- choke me
-#endif
-
- end
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_f77_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_compiler_gnu=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_compiler_gnu=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-ac_cv_f77_compiler_gnu=$ac_compiler_gnu
-
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_f77_compiler_gnu" >&5
-echo "${ECHO_T}$ac_cv_f77_compiler_gnu" >&6; }
-ac_ext=$ac_save_ext
-ac_test_FFLAGS=${FFLAGS+set}
-ac_save_FFLAGS=$FFLAGS
-FFLAGS=
-{ echo "$as_me:$LINENO: checking whether $F77 accepts -g" >&5
-echo $ECHO_N "checking whether $F77 accepts -g... $ECHO_C" >&6; }
-if test "${ac_cv_prog_f77_g+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- FFLAGS=-g
-cat >conftest.$ac_ext <<_ACEOF
- program main
-
- end
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_f77_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_cv_prog_f77_g=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_prog_f77_g=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_prog_f77_g" >&5
-echo "${ECHO_T}$ac_cv_prog_f77_g" >&6; }
-if test "$ac_test_FFLAGS" = set; then
- FFLAGS=$ac_save_FFLAGS
-elif test $ac_cv_prog_f77_g = yes; then
- if test "x$ac_cv_f77_compiler_gnu" = xyes; then
- FFLAGS="-g -O2"
- else
- FFLAGS="-g"
- fi
-else
- if test "x$ac_cv_f77_compiler_gnu" = xyes; then
- FFLAGS="-O2"
- else
- FFLAGS=
- fi
-fi
-
-G77=`test $ac_compiler_gnu = yes && echo yes`
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-
-# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
-
-# find the maximum length of command line arguments
-{ echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5
-echo $ECHO_N "checking the maximum length of command line arguments... $ECHO_C" >&6; }
-if test "${lt_cv_sys_max_cmd_len+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- i=0
- teststring="ABCD"
-
- case $build_os in
- msdosdjgpp*)
- # On DJGPP, this test can blow up pretty badly due to problems in libc
- # (any single argument exceeding 2000 bytes causes a buffer overrun
- # during glob expansion). Even if it were fixed, the result of this
- # check would be larger than it should be.
- lt_cv_sys_max_cmd_len=12288; # 12K is about right
- ;;
-
- gnu*)
- # Under GNU Hurd, this test is not required because there is
- # no limit to the length of command line arguments.
- # Libtool will interpret -1 as no limit whatsoever
- lt_cv_sys_max_cmd_len=-1;
- ;;
-
- cygwin* | mingw*)
- # On Win9x/ME, this test blows up -- it succeeds, but takes
- # about 5 minutes as the teststring grows exponentially.
- # Worse, since 9x/ME are not pre-emptively multitasking,
- # you end up with a "frozen" computer, even though with patience
- # the test eventually succeeds (with a max line length of 256k).
- # Instead, let's just punt: use the minimum linelength reported by
- # all of the supported platforms: 8192 (on NT/2K/XP).
- lt_cv_sys_max_cmd_len=8192;
- ;;
-
- amigaos*)
- # On AmigaOS with pdksh, this test takes hours, literally.
- # So we just punt and use a minimum line length of 8192.
- lt_cv_sys_max_cmd_len=8192;
- ;;
-
- netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
- # This has been around since 386BSD, at least. Likely further.
- if test -x /sbin/sysctl; then
- lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
- elif test -x /usr/sbin/sysctl; then
- lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
- else
- lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs
- fi
- # And add a safety zone
- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
- ;;
-
- interix*)
- # We know the value 262144 and hardcode it with a safety zone (like BSD)
- lt_cv_sys_max_cmd_len=196608
- ;;
-
- osf*)
- # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
- # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
- # nice to cause kernel panics so lets avoid the loop below.
- # First set a reasonable default.
- lt_cv_sys_max_cmd_len=16384
- #
- if test -x /sbin/sysconfig; then
- case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
- *1*) lt_cv_sys_max_cmd_len=-1 ;;
- esac
- fi
- ;;
- sco3.2v5*)
- lt_cv_sys_max_cmd_len=102400
- ;;
- sysv5* | sco5v6* | sysv4.2uw2*)
- kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
- if test -n "$kargmax"; then
- lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'`
- else
- lt_cv_sys_max_cmd_len=32768
- fi
- ;;
- *)
- lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
- if test -n "$lt_cv_sys_max_cmd_len"; then
- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
- else
- SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
- while (test "X"`$SHELL $0 --fallback-echo "X$teststring" 2>/dev/null` \
- = "XX$teststring") >/dev/null 2>&1 &&
- new_result=`expr "X$teststring" : ".*" 2>&1` &&
- lt_cv_sys_max_cmd_len=$new_result &&
- test $i != 17 # 1/2 MB should be enough
- do
- i=`expr $i + 1`
- teststring=$teststring$teststring
- done
- teststring=
- # Add a significant safety factor because C++ compilers can tack on massive
- # amounts of additional arguments before passing them to the linker.
- # It appears as though 1/2 is a usable value.
- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
- fi
- ;;
- esac
-
-fi
-
-if test -n $lt_cv_sys_max_cmd_len ; then
- { echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5
-echo "${ECHO_T}$lt_cv_sys_max_cmd_len" >&6; }
-else
- { echo "$as_me:$LINENO: result: none" >&5
-echo "${ECHO_T}none" >&6; }
-fi
-
-
-
-
-
-# Check for command to grab the raw symbol name followed by C symbol from nm.
-{ echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5
-echo $ECHO_N "checking command to parse $NM output from $compiler object... $ECHO_C" >&6; }
-if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-
-# These are sane defaults that work on at least a few old systems.
-# [They come from Ultrix. What could be older than Ultrix?!! ;)]
-
-# Character class describing NM global symbol codes.
-symcode='[BCDEGRST]'
-
-# Regexp to match symbols that can be accessed directly from C.
-sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
-
-# Transform an extracted symbol line into a proper C declaration
-lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'"
-
-# Transform an extracted symbol line into symbol name and symbol address
-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
-
-# Define system-specific variables.
-case $host_os in
-aix*)
- symcode='[BCDT]'
- ;;
-cygwin* | mingw* | pw32*)
- symcode='[ABCDGISTW]'
- ;;
-hpux*) # Its linker distinguishes data from code symbols
- if test "$host_cpu" = ia64; then
- symcode='[ABCDEGRST]'
- fi
- lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
- lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
- ;;
-linux* | k*bsd*-gnu)
- if test "$host_cpu" = ia64; then
- symcode='[ABCDGIRSTW]'
- lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
- lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
- fi
- ;;
-irix* | nonstopux*)
- symcode='[BCDEGRST]'
- ;;
-osf*)
- symcode='[BCDEGQRST]'
- ;;
-solaris*)
- symcode='[BDRT]'
- ;;
-sco3.2v5*)
- symcode='[DT]'
- ;;
-sysv4.2uw2*)
- symcode='[DT]'
- ;;
-sysv5* | sco5v6* | unixware* | OpenUNIX*)
- symcode='[ABDT]'
- ;;
-sysv4)
- symcode='[DFNSTU]'
- ;;
-esac
-
-# Handle CRLF in mingw tool chain
-opt_cr=
-case $build_os in
-mingw*)
- opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
- ;;
-esac
-
-# If we're using GNU nm, then use its standard symbol codes.
-case `$NM -V 2>&1` in
-*GNU* | *'with BFD'*)
- symcode='[ABCDGIRSTW]' ;;
-esac
-
-# Try without a prefix undercore, then with it.
-for ac_symprfx in "" "_"; do
-
- # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
- symxfrm="\\1 $ac_symprfx\\2 \\2"
-
- # Write the raw and C identifiers.
- lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
-
- # Check to see that the pipe works correctly.
- pipe_works=no
-
- rm -f conftest*
- cat > conftest.$ac_ext <<EOF
-#ifdef __cplusplus
-extern "C" {
-#endif
-char nm_test_var;
-void nm_test_func(){}
-#ifdef __cplusplus
-}
-#endif
-int main(){nm_test_var='a';nm_test_func();return(0);}
-EOF
-
- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
- # Now try to grab the symbols.
- nlist=conftest.nm
- if { (eval echo "$as_me:$LINENO: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5
- (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && test -s "$nlist"; then
- # Try sorting and uniquifying the output.
- if sort "$nlist" | uniq > "$nlist"T; then
- mv -f "$nlist"T "$nlist"
- else
- rm -f "$nlist"T
- fi
-
- # Make sure that we snagged all the symbols we need.
- if grep ' nm_test_var$' "$nlist" >/dev/null; then
- if grep ' nm_test_func$' "$nlist" >/dev/null; then
- cat <<EOF > conftest.$ac_ext
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-EOF
- # Now generate the symbol file.
- eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext'
-
- cat <<EOF >> conftest.$ac_ext
-#if defined (__STDC__) && __STDC__
-# define lt_ptr_t void *
-#else
-# define lt_ptr_t char *
-# define const
-#endif
-
-/* The mapping between symbol names and symbols. */
-const struct {
- const char *name;
- lt_ptr_t address;
-}
-lt_preloaded_symbols[] =
-{
-EOF
- $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext
- cat <<\EOF >> conftest.$ac_ext
- {0, (lt_ptr_t) 0}
-};
-
-#ifdef __cplusplus
-}
-#endif
-EOF
- # Now try linking the two files.
- mv conftest.$ac_objext conftstm.$ac_objext
- lt_save_LIBS="$LIBS"
- lt_save_CFLAGS="$CFLAGS"
- LIBS="conftstm.$ac_objext"
- CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
- if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && test -s conftest${ac_exeext}; then
- pipe_works=yes
- fi
- LIBS="$lt_save_LIBS"
- CFLAGS="$lt_save_CFLAGS"
- else
- echo "cannot find nm_test_func in $nlist" >&5
- fi
- else
- echo "cannot find nm_test_var in $nlist" >&5
- fi
- else
- echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
- fi
- else
- echo "$progname: failed program was:" >&5
- cat conftest.$ac_ext >&5
- fi
- rm -f conftest* conftst*
-
- # Do not use the global_symbol_pipe unless it works.
- if test "$pipe_works" = yes; then
- break
- else
- lt_cv_sys_global_symbol_pipe=
- fi
-done
-
-fi
-
-if test -z "$lt_cv_sys_global_symbol_pipe"; then
- lt_cv_sys_global_symbol_to_cdecl=
-fi
-if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
- { echo "$as_me:$LINENO: result: failed" >&5
-echo "${ECHO_T}failed" >&6; }
-else
- { echo "$as_me:$LINENO: result: ok" >&5
-echo "${ECHO_T}ok" >&6; }
-fi
-
-{ echo "$as_me:$LINENO: checking for objdir" >&5
-echo $ECHO_N "checking for objdir... $ECHO_C" >&6; }
-if test "${lt_cv_objdir+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- rm -f .libs 2>/dev/null
-mkdir .libs 2>/dev/null
-if test -d .libs; then
- lt_cv_objdir=.libs
-else
- # MS-DOS does not allow filenames that begin with a dot.
- lt_cv_objdir=_libs
-fi
-rmdir .libs 2>/dev/null
-fi
-{ echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5
-echo "${ECHO_T}$lt_cv_objdir" >&6; }
-objdir=$lt_cv_objdir
-
-
-
-
-
-case $host_os in
-aix3*)
- # AIX sometimes has problems with the GCC collect2 program. For some
- # reason, if we set the COLLECT_NAMES environment variable, the problems
- # vanish in a puff of smoke.
- if test "X${COLLECT_NAMES+set}" != Xset; then
- COLLECT_NAMES=
- export COLLECT_NAMES
- fi
- ;;
-esac
-
-# Sed substitution that helps us do robust quoting. It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed='sed -e 1s/^X//'
-sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'
-
-# Same as above, but do not quote variable references.
-double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'
-
-# Sed substitution to delay expansion of an escaped shell variable in a
-# double_quote_subst'ed string.
-delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
-
-# Sed substitution to avoid accidental globbing in evaled expressions
-no_glob_subst='s/\*/\\\*/g'
-
-# Constants:
-rm="rm -f"
-
-# Global variables:
-default_ofile=libtool
-can_build_shared=yes
-
-# All known linkers require a `.a' archive for static linking (except MSVC,
-# which needs '.lib').
-libext=a
-ltmain="$ac_aux_dir/ltmain.sh"
-ofile="$default_ofile"
-with_gnu_ld="$lt_cv_prog_gnu_ld"
-
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_AR+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$AR"; then
- ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_AR="${ac_tool_prefix}ar"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-AR=$ac_cv_prog_AR
-if test -n "$AR"; then
- { echo "$as_me:$LINENO: result: $AR" >&5
-echo "${ECHO_T}$AR" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_AR"; then
- ac_ct_AR=$AR
- # Extract the first word of "ar", so it can be a program name with args.
-set dummy ar; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_ac_ct_AR+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$ac_ct_AR"; then
- ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_AR="ar"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_AR=$ac_cv_prog_ac_ct_AR
-if test -n "$ac_ct_AR"; then
- { echo "$as_me:$LINENO: result: $ac_ct_AR" >&5
-echo "${ECHO_T}$ac_ct_AR" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
- if test "x$ac_ct_AR" = x; then
- AR="false"
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf at gnu.org." >&5
-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf at gnu.org." >&2;}
-ac_tool_warned=yes ;;
-esac
- AR=$ac_ct_AR
- fi
-else
- AR="$ac_cv_prog_AR"
-fi
-
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_RANLIB+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$RANLIB"; then
- ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-RANLIB=$ac_cv_prog_RANLIB
-if test -n "$RANLIB"; then
- { echo "$as_me:$LINENO: result: $RANLIB" >&5
-echo "${ECHO_T}$RANLIB" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_RANLIB"; then
- ac_ct_RANLIB=$RANLIB
- # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$ac_ct_RANLIB"; then
- ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_RANLIB="ranlib"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
-if test -n "$ac_ct_RANLIB"; then
- { echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
-echo "${ECHO_T}$ac_ct_RANLIB" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
- if test "x$ac_ct_RANLIB" = x; then
- RANLIB=":"
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf at gnu.org." >&5
-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf at gnu.org." >&2;}
-ac_tool_warned=yes ;;
-esac
- RANLIB=$ac_ct_RANLIB
- fi
-else
- RANLIB="$ac_cv_prog_RANLIB"
-fi
-
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
-set dummy ${ac_tool_prefix}strip; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_STRIP+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$STRIP"; then
- ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_STRIP="${ac_tool_prefix}strip"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-STRIP=$ac_cv_prog_STRIP
-if test -n "$STRIP"; then
- { echo "$as_me:$LINENO: result: $STRIP" >&5
-echo "${ECHO_T}$STRIP" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_STRIP"; then
- ac_ct_STRIP=$STRIP
- # Extract the first word of "strip", so it can be a program name with args.
-set dummy strip; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$ac_ct_STRIP"; then
- ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_STRIP="strip"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
-if test -n "$ac_ct_STRIP"; then
- { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
-echo "${ECHO_T}$ac_ct_STRIP" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
- if test "x$ac_ct_STRIP" = x; then
- STRIP=":"
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf at gnu.org." >&5
-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf at gnu.org." >&2;}
-ac_tool_warned=yes ;;
-esac
- STRIP=$ac_ct_STRIP
- fi
-else
- STRIP="$ac_cv_prog_STRIP"
-fi
-
-
-old_CC="$CC"
-old_CFLAGS="$CFLAGS"
-
-# Set sane defaults for various variables
-test -z "$AR" && AR=ar
-test -z "$AR_FLAGS" && AR_FLAGS=cru
-test -z "$AS" && AS=as
-test -z "$CC" && CC=cc
-test -z "$LTCC" && LTCC=$CC
-test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
-test -z "$DLLTOOL" && DLLTOOL=dlltool
-test -z "$LD" && LD=ld
-test -z "$LN_S" && LN_S="ln -s"
-test -z "$MAGIC_CMD" && MAGIC_CMD=file
-test -z "$NM" && NM=nm
-test -z "$SED" && SED=sed
-test -z "$OBJDUMP" && OBJDUMP=objdump
-test -z "$RANLIB" && RANLIB=:
-test -z "$STRIP" && STRIP=:
-test -z "$ac_objext" && ac_objext=o
-
-# Determine commands to create old-style static archives.
-old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
-old_postinstall_cmds='chmod 644 $oldlib'
-old_postuninstall_cmds=
-
-if test -n "$RANLIB"; then
- case $host_os in
- openbsd*)
- old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
- ;;
- *)
- old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
- ;;
- esac
- old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
-fi
-
-for cc_temp in $compiler""; do
- case $cc_temp in
- compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
- distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
- \-*) ;;
- *) break;;
- esac
-done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-
-
-# Only perform the check for file, if the check method requires it
-case $deplibs_check_method in
-file_magic*)
- if test "$file_magic_cmd" = '$MAGIC_CMD'; then
- { echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5
-echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6; }
-if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- case $MAGIC_CMD in
-[\\/*] | ?:[\\/]*)
- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
- ;;
-*)
- lt_save_MAGIC_CMD="$MAGIC_CMD"
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
- ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
- for ac_dir in $ac_dummy; do
- IFS="$lt_save_ifs"
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/${ac_tool_prefix}file; then
- lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
- if test -n "$file_magic_test_file"; then
- case $deplibs_check_method in
- "file_magic "*)
- file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
- MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
- if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
- $EGREP "$file_magic_regex" > /dev/null; then
- :
- else
- cat <<EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such. This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem. Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool at gnu.org
-
-EOF
- fi ;;
- esac
- fi
- break
- fi
- done
- IFS="$lt_save_ifs"
- MAGIC_CMD="$lt_save_MAGIC_CMD"
- ;;
-esac
-fi
-
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
- { echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
-echo "${ECHO_T}$MAGIC_CMD" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-if test -z "$lt_cv_path_MAGIC_CMD"; then
- if test -n "$ac_tool_prefix"; then
- { echo "$as_me:$LINENO: checking for file" >&5
-echo $ECHO_N "checking for file... $ECHO_C" >&6; }
-if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- case $MAGIC_CMD in
-[\\/*] | ?:[\\/]*)
- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
- ;;
-*)
- lt_save_MAGIC_CMD="$MAGIC_CMD"
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
- ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
- for ac_dir in $ac_dummy; do
- IFS="$lt_save_ifs"
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/file; then
- lt_cv_path_MAGIC_CMD="$ac_dir/file"
- if test -n "$file_magic_test_file"; then
- case $deplibs_check_method in
- "file_magic "*)
- file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
- MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
- if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
- $EGREP "$file_magic_regex" > /dev/null; then
- :
- else
- cat <<EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such. This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem. Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool at gnu.org
-
-EOF
- fi ;;
- esac
- fi
- break
- fi
- done
- IFS="$lt_save_ifs"
- MAGIC_CMD="$lt_save_MAGIC_CMD"
- ;;
-esac
-fi
-
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
- { echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
-echo "${ECHO_T}$MAGIC_CMD" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
- else
- MAGIC_CMD=:
- fi
-fi
-
- fi
- ;;
-esac
-
-enable_dlopen=no
-enable_win32_dll=no
-
-# Check whether --enable-libtool-lock was given.
-if test "${enable_libtool_lock+set}" = set; then
- enableval=$enable_libtool_lock;
-fi
-
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
-
-
-# Check whether --with-pic was given.
-if test "${with_pic+set}" = set; then
- withval=$with_pic; pic_mode="$withval"
-else
- pic_mode=default
-fi
-
-test -z "$pic_mode" && pic_mode=default
-
-# Use C for the default configuration in the libtool script
-tagname=
-lt_save_CC="$CC"
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-# Source file extension for C test sources.
-ac_ext=c
-
-# Object file extension for compiled C test sources.
-objext=o
-objext=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="int some_variable = 0;"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='int main(){return(0);}'
-
-
-# If no C compiler was specified, use CC.
-LTCC=${LTCC-"$CC"}
-
-# If no C compiler flags were specified, use CFLAGS.
-LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-
-# Allow CC to be a program name with arguments.
-compiler=$CC
-
-
-# save warnings/boilerplate of simple test code
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_compile_test_code" >conftest.$ac_ext
-eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_compiler_boilerplate=`cat conftest.err`
-$rm conftest*
-
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_link_test_code" >conftest.$ac_ext
-eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_linker_boilerplate=`cat conftest.err`
-$rm conftest*
-
-
-
-lt_prog_compiler_no_builtin_flag=
-
-if test "$GCC" = yes; then
- lt_prog_compiler_no_builtin_flag=' -fno-builtin'
-
-
-{ echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
-echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6; }
-if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- lt_cv_prog_compiler_rtti_exceptions=no
- ac_outfile=conftest.$ac_objext
- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
- lt_compiler_flag="-fno-rtti -fno-exceptions"
- # Insert the option either (1) after the last *FLAGS variable, or
- # (2) before a word containing "conftest.", or (3) at the end.
- # Note that $ac_compile itself does not contain backslashes and begins
- # with a dollar sign (not a hyphen), so the echo should work correctly.
- # The option is referenced via a variable to avoid confusing sed.
- lt_compile=`echo "$ac_compile" | $SED \
- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
- -e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:6446: $lt_compile\"" >&5)
- (eval "$lt_compile" 2>conftest.err)
- ac_status=$?
- cat conftest.err >&5
- echo "$as_me:6450: \$? = $ac_status" >&5
- if (exit $ac_status) && test -s "$ac_outfile"; then
- # The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings other than the usual output.
- $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
- if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
- lt_cv_prog_compiler_rtti_exceptions=yes
- fi
- fi
- $rm conftest*
-
-fi
-{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
-echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6; }
-
-if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
- lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions"
-else
- :
-fi
-
-fi
-
-lt_prog_compiler_wl=
-lt_prog_compiler_pic=
-lt_prog_compiler_static=
-
-{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
-echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
-
- if test "$GCC" = yes; then
- lt_prog_compiler_wl='-Wl,'
- lt_prog_compiler_static='-static'
-
- case $host_os in
- aix*)
- # All AIX code is PIC.
- if test "$host_cpu" = ia64; then
- # AIX 5 now supports IA64 processor
- lt_prog_compiler_static='-Bstatic'
- fi
- ;;
-
- amigaos*)
- # FIXME: we need at least 68020 code to build shared libraries, but
- # adding the `-m68020' flag to GCC prevents building anything better,
- # like `-m68040'.
- lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4'
- ;;
-
- beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
- # PIC is the default for these OSes.
- ;;
-
- mingw* | cygwin* | pw32* | os2*)
- # This hack is so that the source file can tell whether it is being
- # built for inclusion in a dll (and should export symbols for example).
- # Although the cygwin gcc ignores -fPIC, still need this for old-style
- # (--disable-auto-import) libraries
- lt_prog_compiler_pic='-DDLL_EXPORT'
- ;;
-
- darwin* | rhapsody*)
- # PIC is the default on this platform
- # Common symbols not allowed in MH_DYLIB files
- lt_prog_compiler_pic='-fno-common'
- ;;
-
- interix[3-9]*)
- # Interix 3.x gcc -fpic/-fPIC options generate broken code.
- # Instead, we relocate shared libraries at runtime.
- ;;
-
- msdosdjgpp*)
- # Just because we use GCC doesn't mean we suddenly get shared libraries
- # on systems that don't support them.
- lt_prog_compiler_can_build_shared=no
- enable_shared=no
- ;;
-
- sysv4*MP*)
- if test -d /usr/nec; then
- lt_prog_compiler_pic=-Kconform_pic
- fi
- ;;
-
- hpux*)
- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
- # not for PA HP-UX.
- case $host_cpu in
- hppa*64*|ia64*)
- # +Z the default
- ;;
- *)
- lt_prog_compiler_pic='-fPIC'
- ;;
- esac
- ;;
-
- *)
- lt_prog_compiler_pic='-fPIC'
- ;;
- esac
- else
- # PORTME Check for flag to pass linker flags through the system compiler.
- case $host_os in
- aix*)
- lt_prog_compiler_wl='-Wl,'
- if test "$host_cpu" = ia64; then
- # AIX 5 now supports IA64 processor
- lt_prog_compiler_static='-Bstatic'
- else
- lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp'
- fi
- ;;
- darwin*)
- # PIC is the default on this platform
- # Common symbols not allowed in MH_DYLIB files
- case $cc_basename in
- xlc*)
- lt_prog_compiler_pic='-qnocommon'
- lt_prog_compiler_wl='-Wl,'
- ;;
- esac
- ;;
-
- mingw* | cygwin* | pw32* | os2*)
- # This hack is so that the source file can tell whether it is being
- # built for inclusion in a dll (and should export symbols for example).
- lt_prog_compiler_pic='-DDLL_EXPORT'
- ;;
-
- hpux9* | hpux10* | hpux11*)
- lt_prog_compiler_wl='-Wl,'
- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
- # not for PA HP-UX.
- case $host_cpu in
- hppa*64*|ia64*)
- # +Z the default
- ;;
- *)
- lt_prog_compiler_pic='+Z'
- ;;
- esac
- # Is there a better lt_prog_compiler_static that works with the bundled CC?
- lt_prog_compiler_static='${wl}-a ${wl}archive'
- ;;
-
- irix5* | irix6* | nonstopux*)
- lt_prog_compiler_wl='-Wl,'
- # PIC (with -KPIC) is the default.
- lt_prog_compiler_static='-non_shared'
- ;;
-
- newsos6)
- lt_prog_compiler_pic='-KPIC'
- lt_prog_compiler_static='-Bstatic'
- ;;
-
- linux* | k*bsd*-gnu)
- case $cc_basename in
- icc* | ecc*)
- lt_prog_compiler_wl='-Wl,'
- lt_prog_compiler_pic='-KPIC'
- lt_prog_compiler_static='-static'
- ;;
- pgcc* | pgf77* | pgf90* | pgf95*)
- # Portland Group compilers (*not* the Pentium gcc compiler,
- # which looks to be a dead project)
- lt_prog_compiler_wl='-Wl,'
- lt_prog_compiler_pic='-fpic'
- lt_prog_compiler_static='-Bstatic'
- ;;
- ccc*)
- lt_prog_compiler_wl='-Wl,'
- # All Alpha code is PIC.
- lt_prog_compiler_static='-non_shared'
- ;;
- *)
- case `$CC -V 2>&1 | sed 5q` in
- *Sun\ C*)
- # Sun C 5.9
- lt_prog_compiler_pic='-KPIC'
- lt_prog_compiler_static='-Bstatic'
- lt_prog_compiler_wl='-Wl,'
- ;;
- *Sun\ F*)
- # Sun Fortran 8.3 passes all unrecognized flags to the linker
- lt_prog_compiler_pic='-KPIC'
- lt_prog_compiler_static='-Bstatic'
- lt_prog_compiler_wl=''
- ;;
- esac
- ;;
- esac
- ;;
-
- osf3* | osf4* | osf5*)
- lt_prog_compiler_wl='-Wl,'
- # All OSF/1 code is PIC.
- lt_prog_compiler_static='-non_shared'
- ;;
-
- rdos*)
- lt_prog_compiler_static='-non_shared'
- ;;
-
- solaris*)
- lt_prog_compiler_pic='-KPIC'
- lt_prog_compiler_static='-Bstatic'
- case $cc_basename in
- f77* | f90* | f95*)
- lt_prog_compiler_wl='-Qoption ld ';;
- *)
- lt_prog_compiler_wl='-Wl,';;
- esac
- ;;
-
- sunos4*)
- lt_prog_compiler_wl='-Qoption ld '
- lt_prog_compiler_pic='-PIC'
- lt_prog_compiler_static='-Bstatic'
- ;;
-
- sysv4 | sysv4.2uw2* | sysv4.3*)
- lt_prog_compiler_wl='-Wl,'
- lt_prog_compiler_pic='-KPIC'
- lt_prog_compiler_static='-Bstatic'
- ;;
-
- sysv4*MP*)
- if test -d /usr/nec ;then
- lt_prog_compiler_pic='-Kconform_pic'
- lt_prog_compiler_static='-Bstatic'
- fi
- ;;
-
- sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
- lt_prog_compiler_wl='-Wl,'
- lt_prog_compiler_pic='-KPIC'
- lt_prog_compiler_static='-Bstatic'
- ;;
-
- unicos*)
- lt_prog_compiler_wl='-Wl,'
- lt_prog_compiler_can_build_shared=no
- ;;
-
- uts4*)
- lt_prog_compiler_pic='-pic'
- lt_prog_compiler_static='-Bstatic'
- ;;
-
- *)
- lt_prog_compiler_can_build_shared=no
- ;;
- esac
- fi
-
-{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5
-echo "${ECHO_T}$lt_prog_compiler_pic" >&6; }
-
-#
-# Check to make sure the PIC flag actually works.
-#
-if test -n "$lt_prog_compiler_pic"; then
-
-{ echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
-echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic works... $ECHO_C" >&6; }
-if test "${lt_prog_compiler_pic_works+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- lt_prog_compiler_pic_works=no
- ac_outfile=conftest.$ac_objext
- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
- lt_compiler_flag="$lt_prog_compiler_pic -DPIC"
- # Insert the option either (1) after the last *FLAGS variable, or
- # (2) before a word containing "conftest.", or (3) at the end.
- # Note that $ac_compile itself does not contain backslashes and begins
- # with a dollar sign (not a hyphen), so the echo should work correctly.
- # The option is referenced via a variable to avoid confusing sed.
- lt_compile=`echo "$ac_compile" | $SED \
- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
- -e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:6736: $lt_compile\"" >&5)
- (eval "$lt_compile" 2>conftest.err)
- ac_status=$?
- cat conftest.err >&5
- echo "$as_me:6740: \$? = $ac_status" >&5
- if (exit $ac_status) && test -s "$ac_outfile"; then
- # The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings other than the usual output.
- $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
- if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
- lt_prog_compiler_pic_works=yes
- fi
- fi
- $rm conftest*
-
-fi
-{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works" >&5
-echo "${ECHO_T}$lt_prog_compiler_pic_works" >&6; }
-
-if test x"$lt_prog_compiler_pic_works" = xyes; then
- case $lt_prog_compiler_pic in
- "" | " "*) ;;
- *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;;
- esac
-else
- lt_prog_compiler_pic=
- lt_prog_compiler_can_build_shared=no
-fi
-
-fi
-case $host_os in
- # For platforms which do not support PIC, -DPIC is meaningless:
- *djgpp*)
- lt_prog_compiler_pic=
- ;;
- *)
- lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
- ;;
-esac
-
-#
-# Check to make sure the static flag actually works.
-#
-wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\"
-{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
-echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; }
-if test "${lt_prog_compiler_static_works+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- lt_prog_compiler_static_works=no
- save_LDFLAGS="$LDFLAGS"
- LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
- echo "$lt_simple_link_test_code" > conftest.$ac_ext
- if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
- # The linker can only warn and ignore the option if not recognized
- # So say no if there are warnings
- if test -s conftest.err; then
- # Append any errors to the config.log.
- cat conftest.err 1>&5
- $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
- if diff conftest.exp conftest.er2 >/dev/null; then
- lt_prog_compiler_static_works=yes
- fi
- else
- lt_prog_compiler_static_works=yes
- fi
- fi
- $rm conftest*
- LDFLAGS="$save_LDFLAGS"
-
-fi
-{ echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works" >&5
-echo "${ECHO_T}$lt_prog_compiler_static_works" >&6; }
-
-if test x"$lt_prog_compiler_static_works" = xyes; then
- :
-else
- lt_prog_compiler_static=
-fi
-
-
-{ echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
-echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; }
-if test "${lt_cv_prog_compiler_c_o+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- lt_cv_prog_compiler_c_o=no
- $rm -r conftest 2>/dev/null
- mkdir conftest
- cd conftest
- mkdir out
- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-
- lt_compiler_flag="-o out/conftest2.$ac_objext"
- # Insert the option either (1) after the last *FLAGS variable, or
- # (2) before a word containing "conftest.", or (3) at the end.
- # Note that $ac_compile itself does not contain backslashes and begins
- # with a dollar sign (not a hyphen), so the echo should work correctly.
- lt_compile=`echo "$ac_compile" | $SED \
- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
- -e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:6840: $lt_compile\"" >&5)
- (eval "$lt_compile" 2>out/conftest.err)
- ac_status=$?
- cat out/conftest.err >&5
- echo "$as_me:6844: \$? = $ac_status" >&5
- if (exit $ac_status) && test -s out/conftest2.$ac_objext
- then
- # The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings
- $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
- $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
- if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
- lt_cv_prog_compiler_c_o=yes
- fi
- fi
- chmod u+w . 2>&5
- $rm conftest*
- # SGI C++ compiler will create directory out/ii_files/ for
- # template instantiation
- test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
- $rm out/* && rmdir out
- cd ..
- rmdir conftest
- $rm conftest*
-
-fi
-{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5
-echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6; }
-
-
-hard_links="nottested"
-if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then
- # do not overwrite the value of need_locks provided by the user
- { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
-echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; }
- hard_links=yes
- $rm conftest*
- ln conftest.a conftest.b 2>/dev/null && hard_links=no
- touch conftest.a
- ln conftest.a conftest.b 2>&5 || hard_links=no
- ln conftest.a conftest.b 2>/dev/null && hard_links=no
- { echo "$as_me:$LINENO: result: $hard_links" >&5
-echo "${ECHO_T}$hard_links" >&6; }
- if test "$hard_links" = no; then
- { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
-echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
- need_locks=warn
- fi
-else
- need_locks=no
-fi
-
-{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
-echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; }
-
- runpath_var=
- allow_undefined_flag=
- enable_shared_with_static_runtimes=no
- archive_cmds=
- archive_expsym_cmds=
- old_archive_From_new_cmds=
- old_archive_from_expsyms_cmds=
- export_dynamic_flag_spec=
- whole_archive_flag_spec=
- thread_safe_flag_spec=
- hardcode_libdir_flag_spec=
- hardcode_libdir_flag_spec_ld=
- hardcode_libdir_separator=
- hardcode_direct=no
- hardcode_minus_L=no
- hardcode_shlibpath_var=unsupported
- link_all_deplibs=unknown
- hardcode_automatic=no
- module_cmds=
- module_expsym_cmds=
- always_export_symbols=no
- export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
- # include_expsyms should be a list of space-separated symbols to be *always*
- # included in the symbol list
- include_expsyms=
- # exclude_expsyms can be an extended regexp of symbols to exclude
- # it will be wrapped by ` (' and `)$', so one must not match beginning or
- # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
- # as well as any symbol that contains `d'.
- exclude_expsyms="_GLOBAL_OFFSET_TABLE_"
- # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
- # platforms (ab)use it in PIC code, but their linkers get confused if
- # the symbol is explicitly referenced. Since portable code cannot
- # rely on this symbol name, it's probably fine to never include it in
- # preloaded symbol tables.
- extract_expsyms_cmds=
- # Just being paranoid about ensuring that cc_basename is set.
- for cc_temp in $compiler""; do
- case $cc_temp in
- compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
- distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
- \-*) ;;
- *) break;;
- esac
-done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-
- case $host_os in
- cygwin* | mingw* | pw32*)
- # FIXME: the MSVC++ port hasn't been tested in a loooong time
- # When not using gcc, we currently assume that we are using
- # Microsoft Visual C++.
- if test "$GCC" != yes; then
- with_gnu_ld=no
- fi
- ;;
- interix*)
- # we just hope/assume this is gcc and not c89 (= MSVC++)
- with_gnu_ld=yes
- ;;
- openbsd*)
- with_gnu_ld=no
- ;;
- esac
-
- ld_shlibs=yes
- if test "$with_gnu_ld" = yes; then
- # If archive_cmds runs LD, not CC, wlarc should be empty
- wlarc='${wl}'
-
- # Set some defaults for GNU ld with shared library support. These
- # are reset later if shared libraries are not supported. Putting them
- # here allows them to be overridden if necessary.
- runpath_var=LD_RUN_PATH
- hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir'
- export_dynamic_flag_spec='${wl}--export-dynamic'
- # ancient GNU ld didn't support --whole-archive et. al.
- if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
- whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
- else
- whole_archive_flag_spec=
- fi
- supports_anon_versioning=no
- case `$LD -v 2>/dev/null` in
- *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
- *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
- *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
- *\ 2.11.*) ;; # other 2.11 versions
- *) supports_anon_versioning=yes ;;
- esac
-
- # See if GNU ld supports shared libraries.
- case $host_os in
- aix3* | aix4* | aix5*)
- # On AIX/PPC, the GNU linker is very broken
- if test "$host_cpu" != ia64; then
- ld_shlibs=no
- cat <<EOF 1>&2
-
-*** Warning: the GNU linker, at least up to release 2.9.1, is reported
-*** to be unable to reliably create shared libraries on AIX.
-*** Therefore, libtool is disabling shared libraries support. If you
-*** really care for shared libraries, you may want to modify your PATH
-*** so that a non-GNU linker is found, and then restart.
-
-EOF
- fi
- ;;
-
- amigaos*)
- archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_minus_L=yes
-
- # Samuel A. Falvo II <kc5tja at dolphin.openprojects.net> reports
- # that the semantics of dynamic libraries on AmigaOS, at least up
- # to version 4, is to share data among multiple programs linked
- # with the same dynamic library. Since this doesn't match the
- # behavior of shared libraries on other platforms, we can't use
- # them.
- ld_shlibs=no
- ;;
-
- beos*)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- allow_undefined_flag=unsupported
- # Joseph Beckenbach <jrb3 at best.com> says some releases of gcc
- # support --undefined. This deserves some investigation. FIXME
- archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- else
- ld_shlibs=no
- fi
- ;;
-
- cygwin* | mingw* | pw32*)
- # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
- # as there is no search path for DLLs.
- hardcode_libdir_flag_spec='-L$libdir'
- allow_undefined_flag=unsupported
- always_export_symbols=no
- enable_shared_with_static_runtimes=yes
- export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
-
- if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- # If the export-symbols file already is a .def file (1st line
- # is EXPORTS), use it as is; otherwise, prepend...
- archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
- cp $export_symbols $output_objdir/$soname.def;
- else
- echo EXPORTS > $output_objdir/$soname.def;
- cat $export_symbols >> $output_objdir/$soname.def;
- fi~
- $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- else
- ld_shlibs=no
- fi
- ;;
-
- interix[3-9]*)
- hardcode_direct=no
- hardcode_shlibpath_var=no
- hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
- export_dynamic_flag_spec='${wl}-E'
- # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
- # Instead, shared libraries are loaded at an image base (0x10000000 by
- # default) and relocated if they conflict, which is a slow very memory
- # consuming and fragmenting process. To avoid this, we pick a random,
- # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
- # time. Moving up from 0x10000000 also allows more sbrk(2) space.
- archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- ;;
-
- gnu* | linux* | k*bsd*-gnu)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- tmp_addflag=
- case $cc_basename,$host_cpu in
- pgcc*) # Portland Group C compiler
- whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
- tmp_addflag=' $pic_flag'
- ;;
- pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers
- whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
- tmp_addflag=' $pic_flag -Mnomain' ;;
- ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
- tmp_addflag=' -i_dynamic' ;;
- efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64
- tmp_addflag=' -i_dynamic -nofor_main' ;;
- ifc* | ifort*) # Intel Fortran compiler
- tmp_addflag=' -nofor_main' ;;
- esac
- case `$CC -V 2>&1 | sed 5q` in
- *Sun\ C*) # Sun C 5.9
- whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
- tmp_sharedflag='-G' ;;
- *Sun\ F*) # Sun Fortran 8.3
- tmp_sharedflag='-G' ;;
- *)
- tmp_sharedflag='-shared' ;;
- esac
- archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-
- if test $supports_anon_versioning = yes; then
- archive_expsym_cmds='$echo "{ global:" > $output_objdir/$libname.ver~
- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
- $echo "local: *; };" >> $output_objdir/$libname.ver~
- $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
- fi
- else
- ld_shlibs=no
- fi
- ;;
-
- netbsd*)
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
- wlarc=
- else
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- fi
- ;;
-
- solaris*)
- if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
- ld_shlibs=no
- cat <<EOF 1>&2
-
-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
-*** create shared libraries on Solaris systems. Therefore, libtool
-*** is disabling shared libraries support. We urge you to upgrade GNU
-*** binutils to release 2.9.1 or newer. Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
-
-EOF
- elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- else
- ld_shlibs=no
- fi
- ;;
-
- sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
- case `$LD -v 2>&1` in
- *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
- ld_shlibs=no
- cat <<_LT_EOF 1>&2
-
-*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
-*** reliably create shared libraries on SCO systems. Therefore, libtool
-*** is disabling shared libraries support. We urge you to upgrade GNU
-*** binutils to release 2.16.91.0.3 or newer. Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
-
-_LT_EOF
- ;;
- *)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
- else
- ld_shlibs=no
- fi
- ;;
- esac
- ;;
-
- sunos4*)
- archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- wlarc=
- hardcode_direct=yes
- hardcode_shlibpath_var=no
- ;;
-
- *)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- else
- ld_shlibs=no
- fi
- ;;
- esac
-
- if test "$ld_shlibs" = no; then
- runpath_var=
- hardcode_libdir_flag_spec=
- export_dynamic_flag_spec=
- whole_archive_flag_spec=
- fi
- else
- # PORTME fill in a description of your system's linker (not GNU ld)
- case $host_os in
- aix3*)
- allow_undefined_flag=unsupported
- always_export_symbols=yes
- archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
- # Note: this linker hardcodes the directories in LIBPATH if there
- # are no directories specified by -L.
- hardcode_minus_L=yes
- if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
- # Neither direct hardcoding nor static linking is supported with a
- # broken collect2.
- hardcode_direct=unsupported
- fi
- ;;
-
- aix4* | aix5*)
- if test "$host_cpu" = ia64; then
- # On IA64, the linker does run time linking by default, so we don't
- # have to do anything special.
- aix_use_runtimelinking=no
- exp_sym_flag='-Bexport'
- no_entry_flag=""
- else
- # If we're using GNU nm, then we don't want the "-C" option.
- # -C means demangle to AIX nm, but means don't demangle with GNU nm
- if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
- export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
- else
- export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
- fi
- aix_use_runtimelinking=no
-
- # Test if we are trying to use run time linking or normal
- # AIX style linking. If -brtl is somewhere in LDFLAGS, we
- # need to do runtime linking.
- case $host_os in aix4.[23]|aix4.[23].*|aix5*)
- for ld_flag in $LDFLAGS; do
- if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
- aix_use_runtimelinking=yes
- break
- fi
- done
- ;;
- esac
-
- exp_sym_flag='-bexport'
- no_entry_flag='-bnoentry'
- fi
-
- # When large executables or shared objects are built, AIX ld can
- # have problems creating the table of contents. If linking a library
- # or program results in "error TOC overflow" add -mminimal-toc to
- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-
- archive_cmds=''
- hardcode_direct=yes
- hardcode_libdir_separator=':'
- link_all_deplibs=yes
-
- if test "$GCC" = yes; then
- case $host_os in aix4.[012]|aix4.[012].*)
- # We only want to do this on AIX 4.2 and lower, the check
- # below for broken collect2 doesn't work under 4.3+
- collect2name=`${CC} -print-prog-name=collect2`
- if test -f "$collect2name" && \
- strings "$collect2name" | grep resolve_lib_name >/dev/null
- then
- # We have reworked collect2
- :
- else
- # We have old collect2
- hardcode_direct=unsupported
- # It fails to find uninstalled libraries when the uninstalled
- # path is not listed in the libpath. Setting hardcode_minus_L
- # to unsupported forces relinking
- hardcode_minus_L=yes
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_libdir_separator=
- fi
- ;;
- esac
- shared_flag='-shared'
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag="$shared_flag "'${wl}-G'
- fi
- else
- # not using gcc
- if test "$host_cpu" = ia64; then
- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
- # chokes on -Wl,-G. The following line is correct:
- shared_flag='-G'
- else
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag='${wl}-G'
- else
- shared_flag='${wl}-bM:SRE'
- fi
- fi
- fi
-
- # It seems that -bexpall does not export symbols beginning with
- # underscore (_), so it is better to generate a list of symbols to export.
- always_export_symbols=yes
- if test "$aix_use_runtimelinking" = yes; then
- # Warning - without using the other runtime loading flags (-brtl),
- # -berok will link without error, but may produce a broken library.
- allow_undefined_flag='-berok'
- # Determine the default libpath from the value encoded in an empty executable.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext &&
- $as_test_x conftest$ac_exeext; then
-
-lt_aix_libpath_sed='
- /Import File Strings/,/^$/ {
- /^0/ {
- s/^0 *\(.*\)$/\1/
- p
- }
- }'
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then
- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-fi
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-
- hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
- archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
- else
- if test "$host_cpu" = ia64; then
- hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
- allow_undefined_flag="-z nodefs"
- archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
- else
- # Determine the default libpath from the value encoded in an empty executable.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext &&
- $as_test_x conftest$ac_exeext; then
-
-lt_aix_libpath_sed='
- /Import File Strings/,/^$/ {
- /^0/ {
- s/^0 *\(.*\)$/\1/
- p
- }
- }'
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then
- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-fi
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-
- hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
- # Warning - without using the other run time loading flags,
- # -berok will link without error, but may produce a broken library.
- no_undefined_flag=' ${wl}-bernotok'
- allow_undefined_flag=' ${wl}-berok'
- # Exported symbols can be pulled into shared objects from archives
- whole_archive_flag_spec='$convenience'
- archive_cmds_need_lc=yes
- # This is similar to how AIX traditionally builds its shared libraries.
- archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
- fi
- fi
- ;;
-
- amigaos*)
- archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_minus_L=yes
- # see comment about different semantics on the GNU ld section
- ld_shlibs=no
- ;;
-
- bsdi[45]*)
- export_dynamic_flag_spec=-rdynamic
- ;;
-
- cygwin* | mingw* | pw32*)
- # When not using gcc, we currently assume that we are using
- # Microsoft Visual C++.
- # hardcode_libdir_flag_spec is actually meaningless, as there is
- # no search path for DLLs.
- hardcode_libdir_flag_spec=' '
- allow_undefined_flag=unsupported
- # Tell ltmain to make .lib files, not .a files.
- libext=lib
- # Tell ltmain to make .dll files, not .so files.
- shrext_cmds=".dll"
- # FIXME: Setting linknames here is a bad hack.
- archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
- # The linker will automatically build a .lib file if we build a DLL.
- old_archive_From_new_cmds='true'
- # FIXME: Should let the user specify the lib program.
- old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
- fix_srcfile_path='`cygpath -w "$srcfile"`'
- enable_shared_with_static_runtimes=yes
- ;;
-
- darwin* | rhapsody*)
- case $host_os in
- rhapsody* | darwin1.[012])
- allow_undefined_flag='${wl}-undefined ${wl}suppress'
- ;;
- *) # Darwin 1.3 on
- if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
- allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
- else
- case ${MACOSX_DEPLOYMENT_TARGET} in
- 10.[012])
- allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
- ;;
- 10.*)
- allow_undefined_flag='${wl}-undefined ${wl}dynamic_lookup'
- ;;
- esac
- fi
- ;;
- esac
- archive_cmds_need_lc=no
- hardcode_direct=no
- hardcode_automatic=yes
- hardcode_shlibpath_var=unsupported
- whole_archive_flag_spec=''
- link_all_deplibs=yes
- if test "$GCC" = yes ; then
- output_verbose_link_cmd='echo'
- archive_cmds='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
- module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
- archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- module_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- else
- case $cc_basename in
- xlc*)
- output_verbose_link_cmd='echo'
- archive_cmds='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
- module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
- archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- module_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- ;;
- *)
- ld_shlibs=no
- ;;
- esac
- fi
- ;;
-
- dgux*)
- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_shlibpath_var=no
- ;;
-
- freebsd1*)
- ld_shlibs=no
- ;;
-
- # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
- # support. Future versions do this automatically, but an explicit c++rt0.o
- # does not break anything, and helps significantly (at the cost of a little
- # extra space).
- freebsd2.2*)
- archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
- hardcode_libdir_flag_spec='-R$libdir'
- hardcode_direct=yes
- hardcode_shlibpath_var=no
- ;;
-
- # Unfortunately, older versions of FreeBSD 2 do not have this feature.
- freebsd2*)
- archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- hardcode_direct=yes
- hardcode_minus_L=yes
- hardcode_shlibpath_var=no
- ;;
-
- # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
- freebsd* | dragonfly*)
- archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
- hardcode_libdir_flag_spec='-R$libdir'
- hardcode_direct=yes
- hardcode_shlibpath_var=no
- ;;
-
- hpux9*)
- if test "$GCC" = yes; then
- archive_cmds='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
- else
- archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
- fi
- hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
- hardcode_libdir_separator=:
- hardcode_direct=yes
-
- # hardcode_minus_L: Not really in the search PATH,
- # but as the default location of the library.
- hardcode_minus_L=yes
- export_dynamic_flag_spec='${wl}-E'
- ;;
-
- hpux10*)
- if test "$GCC" = yes -a "$with_gnu_ld" = no; then
- archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
- else
- archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
- fi
- if test "$with_gnu_ld" = no; then
- hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
- hardcode_libdir_separator=:
-
- hardcode_direct=yes
- export_dynamic_flag_spec='${wl}-E'
-
- # hardcode_minus_L: Not really in the search PATH,
- # but as the default location of the library.
- hardcode_minus_L=yes
- fi
- ;;
-
- hpux11*)
- if test "$GCC" = yes -a "$with_gnu_ld" = no; then
- case $host_cpu in
- hppa*64*)
- archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- ia64*)
- archive_cmds='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- *)
- archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- esac
- else
- case $host_cpu in
- hppa*64*)
- archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- ia64*)
- archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- *)
- archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- esac
- fi
- if test "$with_gnu_ld" = no; then
- hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
- hardcode_libdir_separator=:
-
- case $host_cpu in
- hppa*64*|ia64*)
- hardcode_libdir_flag_spec_ld='+b $libdir'
- hardcode_direct=no
- hardcode_shlibpath_var=no
- ;;
- *)
- hardcode_direct=yes
- export_dynamic_flag_spec='${wl}-E'
-
- # hardcode_minus_L: Not really in the search PATH,
- # but as the default location of the library.
- hardcode_minus_L=yes
- ;;
- esac
- fi
- ;;
-
- irix5* | irix6* | nonstopux*)
- if test "$GCC" = yes; then
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- else
- archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
- hardcode_libdir_flag_spec_ld='-rpath $libdir'
- fi
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator=:
- link_all_deplibs=yes
- ;;
-
- netbsd*)
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
- else
- archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
- fi
- hardcode_libdir_flag_spec='-R$libdir'
- hardcode_direct=yes
- hardcode_shlibpath_var=no
- ;;
-
- newsos6)
- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_direct=yes
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator=:
- hardcode_shlibpath_var=no
- ;;
-
- openbsd*)
- if test -f /usr/libexec/ld.so; then
- hardcode_direct=yes
- hardcode_shlibpath_var=no
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
- hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
- export_dynamic_flag_spec='${wl}-E'
- else
- case $host_os in
- openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
- archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- hardcode_libdir_flag_spec='-R$libdir'
- ;;
- *)
- archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
- ;;
- esac
- fi
- else
- ld_shlibs=no
- fi
- ;;
-
- os2*)
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_minus_L=yes
- allow_undefined_flag=unsupported
- archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
- old_archive_From_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
- ;;
-
- osf3*)
- if test "$GCC" = yes; then
- allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- else
- allow_undefined_flag=' -expect_unresolved \*'
- archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
- fi
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator=:
- ;;
-
- osf4* | osf5*) # as osf3* with the addition of -msym flag
- if test "$GCC" = yes; then
- allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- else
- allow_undefined_flag=' -expect_unresolved \*'
- archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
- archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
- $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
-
- # Both c and cxx compiler support -rpath directly
- hardcode_libdir_flag_spec='-rpath $libdir'
- fi
- hardcode_libdir_separator=:
- ;;
-
- solaris*)
- no_undefined_flag=' -z text'
- if test "$GCC" = yes; then
- wlarc='${wl}'
- archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
- $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
- else
- wlarc=''
- archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
- archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
- fi
- hardcode_libdir_flag_spec='-R$libdir'
- hardcode_shlibpath_var=no
- case $host_os in
- solaris2.[0-5] | solaris2.[0-5].*) ;;
- *)
- # The compiler driver will combine and reorder linker options,
- # but understands `-z linker_flag'. GCC discards it without `$wl',
- # but is careful enough not to reorder.
- # Supported since Solaris 2.6 (maybe 2.5.1?)
- if test "$GCC" = yes; then
- whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
- else
- whole_archive_flag_spec='-z allextract$convenience -z defaultextract'
- fi
- ;;
- esac
- link_all_deplibs=yes
- ;;
-
- sunos4*)
- if test "x$host_vendor" = xsequent; then
- # Use $CC to link under sequent, because it throws in some extra .o
- # files that make .init and .fini sections work.
- archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
- else
- archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
- fi
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_direct=yes
- hardcode_minus_L=yes
- hardcode_shlibpath_var=no
- ;;
-
- sysv4)
- case $host_vendor in
- sni)
- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_direct=yes # is this really true???
- ;;
- siemens)
- ## LD is ld it makes a PLAMLIB
- ## CC just makes a GrossModule.
- archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
- reload_cmds='$CC -r -o $output$reload_objs'
- hardcode_direct=no
- ;;
- motorola)
- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_direct=no #Motorola manual says yes, but my tests say they lie
- ;;
- esac
- runpath_var='LD_RUN_PATH'
- hardcode_shlibpath_var=no
- ;;
-
- sysv4.3*)
- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_shlibpath_var=no
- export_dynamic_flag_spec='-Bexport'
- ;;
-
- sysv4*MP*)
- if test -d /usr/nec; then
- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_shlibpath_var=no
- runpath_var=LD_RUN_PATH
- hardcode_runpath_var=yes
- ld_shlibs=yes
- fi
- ;;
-
- sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
- no_undefined_flag='${wl}-z,text'
- archive_cmds_need_lc=no
- hardcode_shlibpath_var=no
- runpath_var='LD_RUN_PATH'
-
- if test "$GCC" = yes; then
- archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- else
- archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- fi
- ;;
-
- sysv5* | sco3.2v5* | sco5v6*)
- # Note: We can NOT use -z defs as we might desire, because we do not
- # link with -lc, and that would cause any symbols used from libc to
- # always be unresolved, which means just about no library would
- # ever link correctly. If we're not using GNU ld we use -z text
- # though, which does catch some bad symbols but isn't as heavy-handed
- # as -z defs.
- no_undefined_flag='${wl}-z,text'
- allow_undefined_flag='${wl}-z,nodefs'
- archive_cmds_need_lc=no
- hardcode_shlibpath_var=no
- hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
- hardcode_libdir_separator=':'
- link_all_deplibs=yes
- export_dynamic_flag_spec='${wl}-Bexport'
- runpath_var='LD_RUN_PATH'
-
- if test "$GCC" = yes; then
- archive_cmds='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- else
- archive_cmds='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- fi
- ;;
-
- uts4*)
- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_shlibpath_var=no
- ;;
-
- *)
- ld_shlibs=no
- ;;
- esac
- fi
-
-{ echo "$as_me:$LINENO: result: $ld_shlibs" >&5
-echo "${ECHO_T}$ld_shlibs" >&6; }
-test "$ld_shlibs" = no && can_build_shared=no
-
-#
-# Do we need to explicitly link libc?
-#
-case "x$archive_cmds_need_lc" in
-x|xyes)
- # Assume -lc should be added
- archive_cmds_need_lc=yes
-
- if test "$enable_shared" = yes && test "$GCC" = yes; then
- case $archive_cmds in
- *'~'*)
- # FIXME: we may have to deal with multi-command sequences.
- ;;
- '$CC '*)
- # Test whether the compiler implicitly links with -lc since on some
- # systems, -lgcc has to come before -lc. If gcc already passes -lc
- # to ld, don't add -lc before -lgcc.
- { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
-echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; }
- $rm conftest*
- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-
- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } 2>conftest.err; then
- soname=conftest
- lib=conftest
- libobjs=conftest.$ac_objext
- deplibs=
- wl=$lt_prog_compiler_wl
- pic_flag=$lt_prog_compiler_pic
- compiler_flags=-v
- linker_flags=-v
- verstring=
- output_objdir=.
- libname=conftest
- lt_save_allow_undefined_flag=$allow_undefined_flag
- allow_undefined_flag=
- if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
- (eval $archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
- then
- archive_cmds_need_lc=no
- else
- archive_cmds_need_lc=yes
- fi
- allow_undefined_flag=$lt_save_allow_undefined_flag
- else
- cat conftest.err 1>&5
- fi
- $rm conftest*
- { echo "$as_me:$LINENO: result: $archive_cmds_need_lc" >&5
-echo "${ECHO_T}$archive_cmds_need_lc" >&6; }
- ;;
- esac
- fi
- ;;
-esac
-
-{ echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
-echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; }
-library_names_spec=
-libname_spec='lib$name'
-soname_spec=
-shrext_cmds=".so"
-postinstall_cmds=
-postuninstall_cmds=
-finish_cmds=
-finish_eval=
-shlibpath_var=
-shlibpath_overrides_runpath=unknown
-version_type=none
-dynamic_linker="$host_os ld.so"
-sys_lib_dlsearch_path_spec="/lib /usr/lib"
-
-if test "$GCC" = yes; then
- case $host_os in
- darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
- *) lt_awk_arg="/^libraries:/" ;;
- esac
- lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
- if echo "$lt_search_path_spec" | grep ';' >/dev/null ; then
- # if the path contains ";" then we assume it to be the separator
- # otherwise default to the standard path separator (i.e. ":") - it is
- # assumed that no part of a normal pathname contains ";" but that should
- # okay in the real world where ";" in dirpaths is itself problematic.
- lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e 's/;/ /g'`
- else
- lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
- fi
- # Ok, now we have the path, separated by spaces, we can step through it
- # and add multilib dir if necessary.
- lt_tmp_lt_search_path_spec=
- lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
- for lt_sys_path in $lt_search_path_spec; do
- if test -d "$lt_sys_path/$lt_multi_os_dir"; then
- lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
- else
- test -d "$lt_sys_path" && \
- lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
- fi
- done
- lt_search_path_spec=`echo $lt_tmp_lt_search_path_spec | awk '
-BEGIN {RS=" "; FS="/|\n";} {
- lt_foo="";
- lt_count=0;
- for (lt_i = NF; lt_i > 0; lt_i--) {
- if ($lt_i != "" && $lt_i != ".") {
- if ($lt_i == "..") {
- lt_count++;
- } else {
- if (lt_count == 0) {
- lt_foo="/" $lt_i lt_foo;
- } else {
- lt_count--;
- }
- }
- }
- }
- if (lt_foo != "") { lt_freq[lt_foo]++; }
- if (lt_freq[lt_foo] == 1) { print lt_foo; }
-}'`
- sys_lib_search_path_spec=`echo $lt_search_path_spec`
-else
- sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
-fi
-need_lib_prefix=unknown
-hardcode_into_libs=no
-
-# when you set need_version to no, make sure it does not cause -set_version
-# flags to be left without arguments
-need_version=unknown
-
-case $host_os in
-aix3*)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
- shlibpath_var=LIBPATH
-
- # AIX 3 has no versioning support, so we append a major version to the name.
- soname_spec='${libname}${release}${shared_ext}$major'
- ;;
-
-aix4* | aix5*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- hardcode_into_libs=yes
- if test "$host_cpu" = ia64; then
- # AIX 5 supports IA64
- library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
- shlibpath_var=LD_LIBRARY_PATH
- else
- # With GCC up to 2.95.x, collect2 would create an import file
- # for dependence libraries. The import file would start with
- # the line `#! .'. This would cause the generated library to
- # depend on `.', always an invalid library. This was fixed in
- # development snapshots of GCC prior to 3.0.
- case $host_os in
- aix4 | aix4.[01] | aix4.[01].*)
- if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
- echo ' yes '
- echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
- :
- else
- can_build_shared=no
- fi
- ;;
- esac
- # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
- # soname into executable. Probably we can add versioning support to
- # collect2, so additional links can be useful in future.
- if test "$aix_use_runtimelinking" = yes; then
- # If using run time linking (on AIX 4.2 or later) use lib<name>.so
- # instead of lib<name>.a to let people know that these are not
- # typical AIX shared libraries.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- else
- # We preserve .a as extension for shared libraries through AIX4.2
- # and later when we are not doing run time linking.
- library_names_spec='${libname}${release}.a $libname.a'
- soname_spec='${libname}${release}${shared_ext}$major'
- fi
- shlibpath_var=LIBPATH
- fi
- ;;
-
-amigaos*)
- library_names_spec='$libname.ixlibrary $libname.a'
- # Create ${libname}_ixlibrary.a entries in /sys/libs.
- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
- ;;
-
-beos*)
- library_names_spec='${libname}${shared_ext}'
- dynamic_linker="$host_os ld.so"
- shlibpath_var=LIBRARY_PATH
- ;;
-
-bsdi[45]*)
- version_type=linux
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
- sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
- # the default ld.so.conf also contains /usr/contrib/lib and
- # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
- # libtool to hard-code these into programs
- ;;
-
-cygwin* | mingw* | pw32*)
- version_type=windows
- shrext_cmds=".dll"
- need_version=no
- need_lib_prefix=no
-
- case $GCC,$host_os in
- yes,cygwin* | yes,mingw* | yes,pw32*)
- library_names_spec='$libname.dll.a'
- # DLL is installed to $(libdir)/../bin by postinstall_cmds
- postinstall_cmds='base_file=`basename \${file}`~
- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
- dldir=$destdir/`dirname \$dlpath`~
- test -d \$dldir || mkdir -p \$dldir~
- $install_prog $dir/$dlname \$dldir/$dlname~
- chmod a+x \$dldir/$dlname'
- postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
- dlpath=$dir/\$dldll~
- $rm \$dlpath'
- shlibpath_overrides_runpath=yes
-
- case $host_os in
- cygwin*)
- # Cygwin DLLs use 'cyg' prefix rather than 'lib'
- soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
- sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
- ;;
- mingw*)
- # MinGW DLLs use traditional 'lib' prefix
- soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
- if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
- # It is most probably a Windows format PATH printed by
- # mingw gcc, but we are running on Cygwin. Gcc prints its search
- # path with ; separators, and with drive letters. We can handle the
- # drive letters (cygwin fileutils understands them), so leave them,
- # especially as we might pass files found there to a mingw objdump,
- # which wouldn't understand a cygwinified path. Ahh.
- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
- else
- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
- fi
- ;;
- pw32*)
- # pw32 DLLs use 'pw' prefix rather than 'lib'
- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
- ;;
- esac
- ;;
-
- *)
- library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
- ;;
- esac
- dynamic_linker='Win32 ld.exe'
- # FIXME: first we should search . and the directory the executable is in
- shlibpath_var=PATH
- ;;
-
-darwin* | rhapsody*)
- dynamic_linker="$host_os dyld"
- version_type=darwin
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
- soname_spec='${libname}${release}${major}$shared_ext'
- shlibpath_overrides_runpath=yes
- shlibpath_var=DYLD_LIBRARY_PATH
- shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
-
- sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"
- sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
- ;;
-
-dgux*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- ;;
-
-freebsd1*)
- dynamic_linker=no
- ;;
-
-freebsd* | dragonfly*)
- # DragonFly does not have aout. When/if they implement a new
- # versioning mechanism, adjust this.
- if test -x /usr/bin/objformat; then
- objformat=`/usr/bin/objformat`
- else
- case $host_os in
- freebsd[123]*) objformat=aout ;;
- *) objformat=elf ;;
- esac
- fi
- version_type=freebsd-$objformat
- case $version_type in
- freebsd-elf*)
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
- need_version=no
- need_lib_prefix=no
- ;;
- freebsd-*)
- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
- need_version=yes
- ;;
- esac
- shlibpath_var=LD_LIBRARY_PATH
- case $host_os in
- freebsd2*)
- shlibpath_overrides_runpath=yes
- ;;
- freebsd3.[01]* | freebsdelf3.[01]*)
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- ;;
- freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
- freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- ;;
- *) # from 4.6 on, and DragonFly
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- ;;
- esac
- ;;
-
-gnu*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- hardcode_into_libs=yes
- ;;
-
-hpux9* | hpux10* | hpux11*)
- # Give a soname corresponding to the major version so that dld.sl refuses to
- # link against other versions.
- version_type=sunos
- need_lib_prefix=no
- need_version=no
- case $host_cpu in
- ia64*)
- shrext_cmds='.so'
- hardcode_into_libs=yes
- dynamic_linker="$host_os dld.so"
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- if test "X$HPUX_IA64_MODE" = X32; then
- sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
- else
- sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
- fi
- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
- ;;
- hppa*64*)
- shrext_cmds='.sl'
- hardcode_into_libs=yes
- dynamic_linker="$host_os dld.sl"
- shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
- ;;
- *)
- shrext_cmds='.sl'
- dynamic_linker="$host_os dld.sl"
- shlibpath_var=SHLIB_PATH
- shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- ;;
- esac
- # HP-UX runs *really* slowly unless shared libraries are mode 555.
- postinstall_cmds='chmod 555 $lib'
- ;;
-
-interix[3-9]*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- ;;
-
-irix5* | irix6* | nonstopux*)
- case $host_os in
- nonstopux*) version_type=nonstopux ;;
- *)
- if test "$lt_cv_prog_gnu_ld" = yes; then
- version_type=linux
- else
- version_type=irix
- fi ;;
- esac
- need_lib_prefix=no
- need_version=no
- soname_spec='${libname}${release}${shared_ext}$major'
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
- case $host_os in
- irix5* | nonstopux*)
- libsuff= shlibsuff=
- ;;
- *)
- case $LD in # libtool.m4 will add one of these switches to LD
- *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
- libsuff= shlibsuff= libmagic=32-bit;;
- *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
- libsuff=32 shlibsuff=N32 libmagic=N32;;
- *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
- libsuff=64 shlibsuff=64 libmagic=64-bit;;
- *) libsuff= shlibsuff= libmagic=never-match;;
- esac
- ;;
- esac
- shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
- shlibpath_overrides_runpath=no
- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
- hardcode_into_libs=yes
- ;;
-
-# No shared lib support for Linux oldld, aout, or coff.
-linux*oldld* | linux*aout* | linux*coff*)
- dynamic_linker=no
- ;;
-
-# This must be Linux ELF.
-linux* | k*bsd*-gnu)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- # This implies no fast_install, which is unacceptable.
- # Some rework will be needed to allow for fast_install
- # before this can be enabled.
- hardcode_into_libs=yes
-
- # Append ld.so.conf contents to the search path
- if test -f /etc/ld.so.conf; then
- lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
- sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
- fi
-
- # We used to test for /lib/ld.so.1 and disable shared libraries on
- # powerpc, because MkLinux only supported shared libraries with the
- # GNU dynamic linker. Since this was broken with cross compilers,
- # most powerpc-linux boxes support dynamic linking these days and
- # people can always --disable-shared, the test was removed, and we
- # assume the GNU/Linux dynamic linker is in use.
- dynamic_linker='GNU/Linux ld.so'
- ;;
-
-netbsd*)
- version_type=sunos
- need_lib_prefix=no
- need_version=no
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
- dynamic_linker='NetBSD (a.out) ld.so'
- else
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- dynamic_linker='NetBSD ld.elf_so'
- fi
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- ;;
-
-newsos6)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- ;;
-
-nto-qnx*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- ;;
-
-openbsd*)
- version_type=sunos
- sys_lib_dlsearch_path_spec="/usr/lib"
- need_lib_prefix=no
- # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
- case $host_os in
- openbsd3.3 | openbsd3.3.*) need_version=yes ;;
- *) need_version=no ;;
- esac
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- case $host_os in
- openbsd2.[89] | openbsd2.[89].*)
- shlibpath_overrides_runpath=no
- ;;
- *)
- shlibpath_overrides_runpath=yes
- ;;
- esac
- else
- shlibpath_overrides_runpath=yes
- fi
- ;;
-
-os2*)
- libname_spec='$name'
- shrext_cmds=".dll"
- need_lib_prefix=no
- library_names_spec='$libname${shared_ext} $libname.a'
- dynamic_linker='OS/2 ld.exe'
- shlibpath_var=LIBPATH
- ;;
-
-osf3* | osf4* | osf5*)
- version_type=osf
- need_lib_prefix=no
- need_version=no
- soname_spec='${libname}${release}${shared_ext}$major'
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- shlibpath_var=LD_LIBRARY_PATH
- sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
- sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
- ;;
-
-rdos*)
- dynamic_linker=no
- ;;
-
-solaris*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- # ldd complains unless libraries are executable
- postinstall_cmds='chmod +x $lib'
- ;;
-
-sunos4*)
- version_type=sunos
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
- finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- if test "$with_gnu_ld" = yes; then
- need_lib_prefix=no
- fi
- need_version=yes
- ;;
-
-sysv4 | sysv4.3*)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- case $host_vendor in
- sni)
- shlibpath_overrides_runpath=no
- need_lib_prefix=no
- export_dynamic_flag_spec='${wl}-Blargedynsym'
- runpath_var=LD_RUN_PATH
- ;;
- siemens)
- need_lib_prefix=no
- ;;
- motorola)
- need_lib_prefix=no
- need_version=no
- shlibpath_overrides_runpath=no
- sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
- ;;
- esac
- ;;
-
-sysv4*MP*)
- if test -d /usr/nec ;then
- version_type=linux
- library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
- soname_spec='$libname${shared_ext}.$major'
- shlibpath_var=LD_LIBRARY_PATH
- fi
- ;;
-
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
- version_type=freebsd-elf
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- hardcode_into_libs=yes
- if test "$with_gnu_ld" = yes; then
- sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
- shlibpath_overrides_runpath=no
- else
- sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
- shlibpath_overrides_runpath=yes
- case $host_os in
- sco3.2v5*)
- sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
- ;;
- esac
- fi
- sys_lib_dlsearch_path_spec='/usr/lib'
- ;;
-
-uts4*)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- ;;
-
-*)
- dynamic_linker=no
- ;;
-esac
-{ echo "$as_me:$LINENO: result: $dynamic_linker" >&5
-echo "${ECHO_T}$dynamic_linker" >&6; }
-test "$dynamic_linker" = no && can_build_shared=no
-
-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
- variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-fi
-
-{ echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
-echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; }
-hardcode_action=
-if test -n "$hardcode_libdir_flag_spec" || \
- test -n "$runpath_var" || \
- test "X$hardcode_automatic" = "Xyes" ; then
-
- # We can hardcode non-existant directories.
- if test "$hardcode_direct" != no &&
- # If the only mechanism to avoid hardcoding is shlibpath_var, we
- # have to relink, otherwise we might link with an installed library
- # when we should be linking with a yet-to-be-installed one
- ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, )" != no &&
- test "$hardcode_minus_L" != no; then
- # Linking always hardcodes the temporary library directory.
- hardcode_action=relink
- else
- # We can link without hardcoding, and we can hardcode nonexisting dirs.
- hardcode_action=immediate
- fi
-else
- # We cannot hardcode anything, or else we can only hardcode existing
- # directories.
- hardcode_action=unsupported
-fi
-{ echo "$as_me:$LINENO: result: $hardcode_action" >&5
-echo "${ECHO_T}$hardcode_action" >&6; }
-
-if test "$hardcode_action" = relink; then
- # Fast installation is not supported
- enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
- test "$enable_shared" = no; then
- # Fast installation is not necessary
- enable_fast_install=needless
-fi
-
-striplib=
-old_striplib=
-{ echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5
-echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6; }
-if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
- test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
- test -z "$striplib" && striplib="$STRIP --strip-unneeded"
- { echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6; }
-else
-# FIXME - insert some real tests, host_os isn't really good enough
- case $host_os in
- darwin*)
- if test -n "$STRIP" ; then
- striplib="$STRIP -x"
- old_striplib="$STRIP -S"
- { echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6; }
- else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
- ;;
- *)
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
- ;;
- esac
-fi
-
-if test "x$enable_dlopen" != xyes; then
- enable_dlopen=unknown
- enable_dlopen_self=unknown
- enable_dlopen_self_static=unknown
-else
- lt_cv_dlopen=no
- lt_cv_dlopen_libs=
-
- case $host_os in
- beos*)
- lt_cv_dlopen="load_add_on"
- lt_cv_dlopen_libs=
- lt_cv_dlopen_self=yes
- ;;
-
- mingw* | pw32*)
- lt_cv_dlopen="LoadLibrary"
- lt_cv_dlopen_libs=
- ;;
-
- cygwin*)
- lt_cv_dlopen="dlopen"
- lt_cv_dlopen_libs=
- ;;
-
- darwin*)
- # if libdl is installed we need to link against it
- { echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
-echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6; }
-if test "${ac_cv_lib_dl_dlopen+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldl $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char dlopen ();
-int
-main ()
-{
-return dlopen ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext &&
- $as_test_x conftest$ac_exeext; then
- ac_cv_lib_dl_dlopen=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_lib_dl_dlopen=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
-echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6; }
-if test $ac_cv_lib_dl_dlopen = yes; then
- lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
-else
-
- lt_cv_dlopen="dyld"
- lt_cv_dlopen_libs=
- lt_cv_dlopen_self=yes
-
-fi
-
- ;;
-
- *)
- { echo "$as_me:$LINENO: checking for shl_load" >&5
-echo $ECHO_N "checking for shl_load... $ECHO_C" >&6; }
-if test "${ac_cv_func_shl_load+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-/* Define shl_load to an innocuous variant, in case <limits.h> declares shl_load.
- For example, HP-UX 11i <limits.h> declares gettimeofday. */
-#define shl_load innocuous_shl_load
-
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char shl_load (); below.
- Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- <limits.h> exists even on freestanding compilers. */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef shl_load
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char shl_load ();
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined __stub_shl_load || defined __stub___shl_load
-choke me
-#endif
-
-int
-main ()
-{
-return shl_load ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext &&
- $as_test_x conftest$ac_exeext; then
- ac_cv_func_shl_load=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_func_shl_load=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5
-echo "${ECHO_T}$ac_cv_func_shl_load" >&6; }
-if test $ac_cv_func_shl_load = yes; then
- lt_cv_dlopen="shl_load"
-else
- { echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5
-echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6; }
-if test "${ac_cv_lib_dld_shl_load+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldld $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char shl_load ();
-int
-main ()
-{
-return shl_load ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext &&
- $as_test_x conftest$ac_exeext; then
- ac_cv_lib_dld_shl_load=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_lib_dld_shl_load=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5
-echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6; }
-if test $ac_cv_lib_dld_shl_load = yes; then
- lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"
-else
- { echo "$as_me:$LINENO: checking for dlopen" >&5
-echo $ECHO_N "checking for dlopen... $ECHO_C" >&6; }
-if test "${ac_cv_func_dlopen+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-/* Define dlopen to an innocuous variant, in case <limits.h> declares dlopen.
- For example, HP-UX 11i <limits.h> declares gettimeofday. */
-#define dlopen innocuous_dlopen
-
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char dlopen (); below.
- Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- <limits.h> exists even on freestanding compilers. */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef dlopen
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char dlopen ();
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined __stub_dlopen || defined __stub___dlopen
-choke me
-#endif
-
-int
-main ()
-{
-return dlopen ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext &&
- $as_test_x conftest$ac_exeext; then
- ac_cv_func_dlopen=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_func_dlopen=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5
-echo "${ECHO_T}$ac_cv_func_dlopen" >&6; }
-if test $ac_cv_func_dlopen = yes; then
- lt_cv_dlopen="dlopen"
-else
- { echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
-echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6; }
-if test "${ac_cv_lib_dl_dlopen+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldl $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char dlopen ();
-int
-main ()
-{
-return dlopen ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext &&
- $as_test_x conftest$ac_exeext; then
- ac_cv_lib_dl_dlopen=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_lib_dl_dlopen=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
-echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6; }
-if test $ac_cv_lib_dl_dlopen = yes; then
- lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
-else
- { echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5
-echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6; }
-if test "${ac_cv_lib_svld_dlopen+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-lsvld $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char dlopen ();
-int
-main ()
-{
-return dlopen ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext &&
- $as_test_x conftest$ac_exeext; then
- ac_cv_lib_svld_dlopen=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_lib_svld_dlopen=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5
-echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6; }
-if test $ac_cv_lib_svld_dlopen = yes; then
- lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
-else
- { echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5
-echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6; }
-if test "${ac_cv_lib_dld_dld_link+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldld $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char dld_link ();
-int
-main ()
-{
-return dld_link ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext &&
- $as_test_x conftest$ac_exeext; then
- ac_cv_lib_dld_dld_link=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_lib_dld_dld_link=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5
-echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6; }
-if test $ac_cv_lib_dld_dld_link = yes; then
- lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"
-fi
-
-
-fi
-
-
-fi
-
-
-fi
-
-
-fi
-
-
-fi
-
- ;;
- esac
-
- if test "x$lt_cv_dlopen" != xno; then
- enable_dlopen=yes
- else
- enable_dlopen=no
- fi
-
- case $lt_cv_dlopen in
- dlopen)
- save_CPPFLAGS="$CPPFLAGS"
- test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
-
- save_LDFLAGS="$LDFLAGS"
- wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
-
- save_LIBS="$LIBS"
- LIBS="$lt_cv_dlopen_libs $LIBS"
-
- { echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5
-echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6; }
-if test "${lt_cv_dlopen_self+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test "$cross_compiling" = yes; then :
- lt_cv_dlopen_self=cross
-else
- lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
- lt_status=$lt_dlunknown
- cat > conftest.$ac_ext <<EOF
-#line 9189 "configure"
-#include "confdefs.h"
-
-#if HAVE_DLFCN_H
-#include <dlfcn.h>
-#endif
-
-#include <stdio.h>
-
-#ifdef RTLD_GLOBAL
-# define LT_DLGLOBAL RTLD_GLOBAL
-#else
-# ifdef DL_GLOBAL
-# define LT_DLGLOBAL DL_GLOBAL
-# else
-# define LT_DLGLOBAL 0
-# endif
-#endif
-
-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
- find out it does not work in some platform. */
-#ifndef LT_DLLAZY_OR_NOW
-# ifdef RTLD_LAZY
-# define LT_DLLAZY_OR_NOW RTLD_LAZY
-# else
-# ifdef DL_LAZY
-# define LT_DLLAZY_OR_NOW DL_LAZY
-# else
-# ifdef RTLD_NOW
-# define LT_DLLAZY_OR_NOW RTLD_NOW
-# else
-# ifdef DL_NOW
-# define LT_DLLAZY_OR_NOW DL_NOW
-# else
-# define LT_DLLAZY_OR_NOW 0
-# endif
-# endif
-# endif
-# endif
-#endif
-
-#ifdef __cplusplus
-extern "C" void exit (int);
-#endif
-
-void fnord() { int i=42;}
-int main ()
-{
- void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
- int status = $lt_dlunknown;
-
- if (self)
- {
- if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
- else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
- /* dlclose (self); */
- }
- else
- puts (dlerror ());
-
- exit (status);
-}
-EOF
- if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
- (./conftest; exit; ) >&5 2>/dev/null
- lt_status=$?
- case x$lt_status in
- x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
- x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;;
- x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;;
- esac
- else :
- # compilation failed
- lt_cv_dlopen_self=no
- fi
-fi
-rm -fr conftest*
-
-
-fi
-{ echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5
-echo "${ECHO_T}$lt_cv_dlopen_self" >&6; }
-
- if test "x$lt_cv_dlopen_self" = xyes; then
- wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
- { echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5
-echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6; }
-if test "${lt_cv_dlopen_self_static+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test "$cross_compiling" = yes; then :
- lt_cv_dlopen_self_static=cross
-else
- lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
- lt_status=$lt_dlunknown
- cat > conftest.$ac_ext <<EOF
-#line 9289 "configure"
-#include "confdefs.h"
-
-#if HAVE_DLFCN_H
-#include <dlfcn.h>
-#endif
-
-#include <stdio.h>
-
-#ifdef RTLD_GLOBAL
-# define LT_DLGLOBAL RTLD_GLOBAL
-#else
-# ifdef DL_GLOBAL
-# define LT_DLGLOBAL DL_GLOBAL
-# else
-# define LT_DLGLOBAL 0
-# endif
-#endif
-
-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
- find out it does not work in some platform. */
-#ifndef LT_DLLAZY_OR_NOW
-# ifdef RTLD_LAZY
-# define LT_DLLAZY_OR_NOW RTLD_LAZY
-# else
-# ifdef DL_LAZY
-# define LT_DLLAZY_OR_NOW DL_LAZY
-# else
-# ifdef RTLD_NOW
-# define LT_DLLAZY_OR_NOW RTLD_NOW
-# else
-# ifdef DL_NOW
-# define LT_DLLAZY_OR_NOW DL_NOW
-# else
-# define LT_DLLAZY_OR_NOW 0
-# endif
-# endif
-# endif
-# endif
-#endif
-
-#ifdef __cplusplus
-extern "C" void exit (int);
-#endif
-
-void fnord() { int i=42;}
-int main ()
-{
- void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
- int status = $lt_dlunknown;
-
- if (self)
- {
- if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
- else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
- /* dlclose (self); */
- }
- else
- puts (dlerror ());
-
- exit (status);
-}
-EOF
- if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
- (./conftest; exit; ) >&5 2>/dev/null
- lt_status=$?
- case x$lt_status in
- x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
- x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;;
- x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;;
- esac
- else :
- # compilation failed
- lt_cv_dlopen_self_static=no
- fi
-fi
-rm -fr conftest*
-
-
-fi
-{ echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5
-echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6; }
- fi
-
- CPPFLAGS="$save_CPPFLAGS"
- LDFLAGS="$save_LDFLAGS"
- LIBS="$save_LIBS"
- ;;
- esac
-
- case $lt_cv_dlopen_self in
- yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
- *) enable_dlopen_self=unknown ;;
- esac
-
- case $lt_cv_dlopen_self_static in
- yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
- *) enable_dlopen_self_static=unknown ;;
- esac
-fi
-
-
-# Report which library types will actually be built
-{ echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5
-echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6; }
-{ echo "$as_me:$LINENO: result: $can_build_shared" >&5
-echo "${ECHO_T}$can_build_shared" >&6; }
-
-{ echo "$as_me:$LINENO: checking whether to build shared libraries" >&5
-echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6; }
-test "$can_build_shared" = "no" && enable_shared=no
-
-# On AIX, shared libraries and static libraries use the same namespace, and
-# are all built from PIC.
-case $host_os in
-aix3*)
- test "$enable_shared" = yes && enable_static=no
- if test -n "$RANLIB"; then
- archive_cmds="$archive_cmds~\$RANLIB \$lib"
- postinstall_cmds='$RANLIB $lib'
- fi
- ;;
-
-aix4* | aix5*)
- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
- test "$enable_shared" = yes && enable_static=no
- fi
- ;;
-esac
-{ echo "$as_me:$LINENO: result: $enable_shared" >&5
-echo "${ECHO_T}$enable_shared" >&6; }
-
-{ echo "$as_me:$LINENO: checking whether to build static libraries" >&5
-echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6; }
-# Make sure either enable_shared or enable_static is yes.
-test "$enable_shared" = yes || enable_static=yes
-{ echo "$as_me:$LINENO: result: $enable_static" >&5
-echo "${ECHO_T}$enable_static" >&6; }
-
-# The else clause should only fire when bootstrapping the
-# libtool distribution, otherwise you forgot to ship ltmain.sh
-# with your package, and you will get complaints that there are
-# no rules to generate ltmain.sh.
-if test -f "$ltmain"; then
- # See if we are running on zsh, and set the options which allow our commands through
- # without removal of \ escapes.
- if test -n "${ZSH_VERSION+set}" ; then
- setopt NO_GLOB_SUBST
- fi
- # Now quote all the things that may contain metacharacters while being
- # careful not to overquote the AC_SUBSTed values. We take copies of the
- # variables and quote the copies for generation of the libtool script.
- for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
- SED SHELL STRIP \
- libname_spec library_names_spec soname_spec extract_expsyms_cmds \
- old_striplib striplib file_magic_cmd finish_cmds finish_eval \
- deplibs_check_method reload_flag reload_cmds need_locks \
- lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
- lt_cv_sys_global_symbol_to_c_name_address \
- sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
- old_postinstall_cmds old_postuninstall_cmds \
- compiler \
- CC \
- LD \
- lt_prog_compiler_wl \
- lt_prog_compiler_pic \
- lt_prog_compiler_static \
- lt_prog_compiler_no_builtin_flag \
- export_dynamic_flag_spec \
- thread_safe_flag_spec \
- whole_archive_flag_spec \
- enable_shared_with_static_runtimes \
- old_archive_cmds \
- old_archive_from_new_cmds \
- predep_objects \
- postdep_objects \
- predeps \
- postdeps \
- compiler_lib_search_path \
- archive_cmds \
- archive_expsym_cmds \
- postinstall_cmds \
- postuninstall_cmds \
- old_archive_from_expsyms_cmds \
- allow_undefined_flag \
- no_undefined_flag \
- export_symbols_cmds \
- hardcode_libdir_flag_spec \
- hardcode_libdir_flag_spec_ld \
- hardcode_libdir_separator \
- hardcode_automatic \
- module_cmds \
- module_expsym_cmds \
- lt_cv_prog_compiler_c_o \
- fix_srcfile_path \
- exclude_expsyms \
- include_expsyms; do
-
- case $var in
- old_archive_cmds | \
- old_archive_from_new_cmds | \
- archive_cmds | \
- archive_expsym_cmds | \
- module_cmds | \
- module_expsym_cmds | \
- old_archive_from_expsyms_cmds | \
- export_symbols_cmds | \
- extract_expsyms_cmds | reload_cmds | finish_cmds | \
- postinstall_cmds | postuninstall_cmds | \
- old_postinstall_cmds | old_postuninstall_cmds | \
- sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
- # Double-quote double-evaled strings.
- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
- ;;
- *)
- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
- ;;
- esac
- done
-
- case $lt_echo in
- *'\$0 --fallback-echo"')
- lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
- ;;
- esac
-
-cfgfile="${ofile}T"
- trap "$rm \"$cfgfile\"; exit 1" 1 2 15
- $rm -f "$cfgfile"
- { echo "$as_me:$LINENO: creating $ofile" >&5
-echo "$as_me: creating $ofile" >&6;}
-
- cat <<__EOF__ >> "$cfgfile"
-#! $SHELL
-
-# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
-# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
-# NOTE: Changes made to this file will be lost: look at ltmain.sh.
-#
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
-# Free Software Foundation, Inc.
-#
-# This file is part of GNU Libtool:
-# Originally by Gordon Matzigkeit <gord at gnu.ai.mit.edu>, 1996
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# A sed program that does not truncate output.
-SED=$lt_SED
-
-# Sed that helps us avoid accidentally triggering echo(1) options like -n.
-Xsed="$SED -e 1s/^X//"
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-# The names of the tagged configurations supported by this script.
-available_tags=
-
-# ### BEGIN LIBTOOL CONFIG
-
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-
-# Shell to use when invoking shell scripts.
-SHELL=$lt_SHELL
-
-# Whether or not to build shared libraries.
-build_libtool_libs=$enable_shared
-
-# Whether or not to build static libraries.
-build_old_libs=$enable_static
-
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=$archive_cmds_need_lc
-
-# Whether or not to disallow shared libs when runtime libs are static
-allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes
-
-# Whether or not to optimize for fast installation.
-fast_install=$enable_fast_install
-
-# The host system.
-host_alias=$host_alias
-host=$host
-host_os=$host_os
-
-# The build system.
-build_alias=$build_alias
-build=$build
-build_os=$build_os
-
-# An echo program that does not interpret backslashes.
-echo=$lt_echo
-
-# The archiver.
-AR=$lt_AR
-AR_FLAGS=$lt_AR_FLAGS
-
-# A C compiler.
-LTCC=$lt_LTCC
-
-# LTCC compiler flags.
-LTCFLAGS=$lt_LTCFLAGS
-
-# A language-specific compiler.
-CC=$lt_compiler
-
-# Is the compiler the GNU C compiler?
-with_gcc=$GCC
-
-# An ERE matcher.
-EGREP=$lt_EGREP
-
-# The linker used to build libraries.
-LD=$lt_LD
-
-# Whether we need hard or soft links.
-LN_S=$lt_LN_S
-
-# A BSD-compatible nm program.
-NM=$lt_NM
-
-# A symbol stripping program
-STRIP=$lt_STRIP
-
-# Used to examine libraries when file_magic_cmd begins "file"
-MAGIC_CMD=$MAGIC_CMD
-
-# Used on cygwin: DLL creation program.
-DLLTOOL="$DLLTOOL"
-
-# Used on cygwin: object dumper.
-OBJDUMP="$OBJDUMP"
-
-# Used on cygwin: assembler.
-AS="$AS"
-
-# The name of the directory that contains temporary libtool files.
-objdir=$objdir
-
-# How to create reloadable object files.
-reload_flag=$lt_reload_flag
-reload_cmds=$lt_reload_cmds
-
-# How to pass a linker flag through the compiler.
-wl=$lt_lt_prog_compiler_wl
-
-# Object file suffix (normally "o").
-objext="$ac_objext"
-
-# Old archive suffix (normally "a").
-libext="$libext"
-
-# Shared library suffix (normally ".so").
-shrext_cmds='$shrext_cmds'
-
-# Executable file suffix (normally "").
-exeext="$exeext"
-
-# Additional compiler flags for building library objects.
-pic_flag=$lt_lt_prog_compiler_pic
-pic_mode=$pic_mode
-
-# What is the maximum length of a command?
-max_cmd_len=$lt_cv_sys_max_cmd_len
-
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o=$lt_lt_cv_prog_compiler_c_o
-
-# Must we lock files when doing compilation?
-need_locks=$lt_need_locks
-
-# Do we need the lib prefix for modules?
-need_lib_prefix=$need_lib_prefix
-
-# Do we need a version for libraries?
-need_version=$need_version
-
-# Whether dlopen is supported.
-dlopen_support=$enable_dlopen
-
-# Whether dlopen of programs is supported.
-dlopen_self=$enable_dlopen_self
-
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=$enable_dlopen_self_static
-
-# Compiler flag to prevent dynamic linking.
-link_static_flag=$lt_lt_prog_compiler_static
-
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag
-
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec=$lt_export_dynamic_flag_spec
-
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec=$lt_whole_archive_flag_spec
-
-# Compiler flag to generate thread-safe objects.
-thread_safe_flag_spec=$lt_thread_safe_flag_spec
-
-# Library versioning type.
-version_type=$version_type
-
-# Format of library name prefix.
-libname_spec=$lt_libname_spec
-
-# List of archive names. First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME.
-library_names_spec=$lt_library_names_spec
-
-# The coded name of the library, if different from the real name.
-soname_spec=$lt_soname_spec
-
-# Commands used to build and install an old-style archive.
-RANLIB=$lt_RANLIB
-old_archive_cmds=$lt_old_archive_cmds
-old_postinstall_cmds=$lt_old_postinstall_cmds
-old_postuninstall_cmds=$lt_old_postuninstall_cmds
-
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=$lt_old_archive_from_new_cmds
-
-# Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds
-
-# Commands used to build and install a shared archive.
-archive_cmds=$lt_archive_cmds
-archive_expsym_cmds=$lt_archive_expsym_cmds
-postinstall_cmds=$lt_postinstall_cmds
-postuninstall_cmds=$lt_postuninstall_cmds
-
-# Commands used to build a loadable module (assumed same as above if empty)
-module_cmds=$lt_module_cmds
-module_expsym_cmds=$lt_module_expsym_cmds
-
-# Commands to strip libraries.
-old_striplib=$lt_old_striplib
-striplib=$lt_striplib
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predep_objects=$lt_predep_objects
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdep_objects=$lt_postdep_objects
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predeps=$lt_predeps
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdeps=$lt_postdeps
-
-# The library search path used internally by the compiler when linking
-# a shared library.
-compiler_lib_search_path=$lt_compiler_lib_search_path
-
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method=$lt_deplibs_check_method
-
-# Command to use when deplibs_check_method == file_magic.
-file_magic_cmd=$lt_file_magic_cmd
-
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=$lt_allow_undefined_flag
-
-# Flag that forces no undefined symbols.
-no_undefined_flag=$lt_no_undefined_flag
-
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds=$lt_finish_cmds
-
-# Same as above, but a single script fragment to be evaled but not shown.
-finish_eval=$lt_finish_eval
-
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-
-# Transform the output of nm in a proper C declaration
-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-
-# Transform the output of nm in a C name address pair
-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-
-# This is the shared library runtime path variable.
-runpath_var=$runpath_var
-
-# This is the shared library path variable.
-shlibpath_var=$shlibpath_var
-
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-
-# How to hardcode a shared library path into an executable.
-hardcode_action=$hardcode_action
-
-# Whether we should hardcode library paths into libraries.
-hardcode_into_libs=$hardcode_into_libs
-
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
-
-# If ld is used when linking, flag to hardcode \$libdir into
-# a binary during linking. This must work even if \$libdir does
-# not exist.
-hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld
-
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator=$lt_hardcode_libdir_separator
-
-# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct=$hardcode_direct
-
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L=$hardcode_minus_L
-
-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-# the resulting binary.
-hardcode_shlibpath_var=$hardcode_shlibpath_var
-
-# Set to yes if building a shared library automatically hardcodes DIR into the library
-# and all subsequent libraries and executables linked against it.
-hardcode_automatic=$hardcode_automatic
-
-# Variables whose values should be saved in libtool wrapper scripts and
-# restored at relink time.
-variables_saved_for_relink="$variables_saved_for_relink"
-
-# Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=$link_all_deplibs
-
-# Compile-time system search path for libraries
-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-
-# Run-time system search path for libraries
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-
-# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path=$lt_fix_srcfile_path
-
-# Set to yes if exported symbols are required.
-always_export_symbols=$always_export_symbols
-
-# The commands to list exported symbols.
-export_symbols_cmds=$lt_export_symbols_cmds
-
-# The commands to extract the exported symbol list from a shared archive.
-extract_expsyms_cmds=$lt_extract_expsyms_cmds
-
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms=$lt_exclude_expsyms
-
-# Symbols that must always be exported.
-include_expsyms=$lt_include_expsyms
-
-# ### END LIBTOOL CONFIG
-
-__EOF__
-
-
- case $host_os in
- aix3*)
- cat <<\EOF >> "$cfgfile"
-
-# AIX sometimes has problems with the GCC collect2 program. For some
-# reason, if we set the COLLECT_NAMES environment variable, the problems
-# vanish in a puff of smoke.
-if test "X${COLLECT_NAMES+set}" != Xset; then
- COLLECT_NAMES=
- export COLLECT_NAMES
-fi
-EOF
- ;;
- esac
-
- # We use sed instead of cat because bash on DJGPP gets confused if
- # if finds mixed CR/LF and LF-only lines. Since sed operates in
- # text mode, it properly converts lines to CR/LF. This bash problem
- # is reportedly fixed, but why not run on old versions too?
- sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1)
-
- mv -f "$cfgfile" "$ofile" || \
- (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
- chmod +x "$ofile"
-
-else
- # If there is no Makefile yet, we rely on a make rule to execute
- # `config.status --recheck' to rerun these tests and create the
- # libtool script then.
- ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
- if test -f "$ltmain_in"; then
- test -f Makefile && make "$ltmain"
- fi
-fi
-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-CC="$lt_save_CC"
-
-
-# Check whether --with-tags was given.
-if test "${with_tags+set}" = set; then
- withval=$with_tags; tagnames="$withval"
-fi
-
-
-if test -f "$ltmain" && test -n "$tagnames"; then
- if test ! -f "${ofile}"; then
- { echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not exist" >&5
-echo "$as_me: WARNING: output file \`$ofile' does not exist" >&2;}
- fi
-
- if test -z "$LTCC"; then
- eval "`$SHELL ${ofile} --config | grep '^LTCC='`"
- if test -z "$LTCC"; then
- { echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not look like a libtool script" >&5
-echo "$as_me: WARNING: output file \`$ofile' does not look like a libtool script" >&2;}
- else
- { echo "$as_me:$LINENO: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&5
-echo "$as_me: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&2;}
- fi
- fi
- if test -z "$LTCFLAGS"; then
- eval "`$SHELL ${ofile} --config | grep '^LTCFLAGS='`"
- fi
-
- # Extract list of available tagged configurations in $ofile.
- # Note that this assumes the entire list is on one line.
- available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'`
-
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
- for tagname in $tagnames; do
- IFS="$lt_save_ifs"
- # Check whether tagname contains only valid characters
- case `$echo "X$tagname" | $Xsed -e 's:[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]::g'` in
- "") ;;
- *) { { echo "$as_me:$LINENO: error: invalid tag name: $tagname" >&5
-echo "$as_me: error: invalid tag name: $tagname" >&2;}
- { (exit 1); exit 1; }; }
- ;;
- esac
-
- if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null
- then
- { { echo "$as_me:$LINENO: error: tag name \"$tagname\" already exists" >&5
-echo "$as_me: error: tag name \"$tagname\" already exists" >&2;}
- { (exit 1); exit 1; }; }
- fi
-
- # Update the list of available tags.
- if test -n "$tagname"; then
- echo appending configuration tag \"$tagname\" to $ofile
-
- case $tagname in
- CXX)
- if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
- ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
- (test "X$CXX" != "Xg++"))) ; then
- ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
-
-
-
-archive_cmds_need_lc_CXX=no
-allow_undefined_flag_CXX=
-always_export_symbols_CXX=no
-archive_expsym_cmds_CXX=
-export_dynamic_flag_spec_CXX=
-hardcode_direct_CXX=no
-hardcode_libdir_flag_spec_CXX=
-hardcode_libdir_flag_spec_ld_CXX=
-hardcode_libdir_separator_CXX=
-hardcode_minus_L_CXX=no
-hardcode_shlibpath_var_CXX=unsupported
-hardcode_automatic_CXX=no
-module_cmds_CXX=
-module_expsym_cmds_CXX=
-link_all_deplibs_CXX=unknown
-old_archive_cmds_CXX=$old_archive_cmds
-no_undefined_flag_CXX=
-whole_archive_flag_spec_CXX=
-enable_shared_with_static_runtimes_CXX=no
-
-# Dependencies to place before and after the object being linked:
-predep_objects_CXX=
-postdep_objects_CXX=
-predeps_CXX=
-postdeps_CXX=
-compiler_lib_search_path_CXX=
-
-# Source file extension for C++ test sources.
-ac_ext=cpp
-
-# Object file extension for compiled C++ test sources.
-objext=o
-objext_CXX=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="int some_variable = 0;"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='int main(int, char *[]) { return(0); }'
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-
-# If no C compiler was specified, use CC.
-LTCC=${LTCC-"$CC"}
-
-# If no C compiler flags were specified, use CFLAGS.
-LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-
-# Allow CC to be a program name with arguments.
-compiler=$CC
-
-
-# save warnings/boilerplate of simple test code
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_compile_test_code" >conftest.$ac_ext
-eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_compiler_boilerplate=`cat conftest.err`
-$rm conftest*
-
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_link_test_code" >conftest.$ac_ext
-eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_linker_boilerplate=`cat conftest.err`
-$rm conftest*
-
-
-# Allow CC to be a program name with arguments.
-lt_save_CC=$CC
-lt_save_LD=$LD
-lt_save_GCC=$GCC
-GCC=$GXX
-lt_save_with_gnu_ld=$with_gnu_ld
-lt_save_path_LD=$lt_cv_path_LD
-if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
- lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
-else
- $as_unset lt_cv_prog_gnu_ld
-fi
-if test -n "${lt_cv_path_LDCXX+set}"; then
- lt_cv_path_LD=$lt_cv_path_LDCXX
-else
- $as_unset lt_cv_path_LD
-fi
-test -z "${LDCXX+set}" || LD=$LDCXX
-CC=${CXX-"c++"}
-compiler=$CC
-compiler_CXX=$CC
-for cc_temp in $compiler""; do
- case $cc_temp in
- compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
- distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
- \-*) ;;
- *) break;;
- esac
-done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-
-
-# We don't want -fno-exception wen compiling C++ code, so set the
-# no_builtin_flag separately
-if test "$GXX" = yes; then
- lt_prog_compiler_no_builtin_flag_CXX=' -fno-builtin'
-else
- lt_prog_compiler_no_builtin_flag_CXX=
-fi
-
-if test "$GXX" = yes; then
- # Set up default GNU C++ configuration
-
-
-# Check whether --with-gnu-ld was given.
-if test "${with_gnu_ld+set}" = set; then
- withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
-else
- with_gnu_ld=no
-fi
-
-ac_prog=ld
-if test "$GCC" = yes; then
- # Check if gcc -print-prog-name=ld gives a path.
- { echo "$as_me:$LINENO: checking for ld used by $CC" >&5
-echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6; }
- case $host in
- *-*-mingw*)
- # gcc leaves a trailing carriage return which upsets mingw
- ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
- *)
- ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
- esac
- case $ac_prog in
- # Accept absolute paths.
- [\\/]* | ?:[\\/]*)
- re_direlt='/[^/][^/]*/\.\./'
- # Canonicalize the pathname of ld
- ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
- while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
- ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
- done
- test -z "$LD" && LD="$ac_prog"
- ;;
- "")
- # If it fails, then pretend we aren't using GCC.
- ac_prog=ld
- ;;
- *)
- # If it is relative, then search for the first ld in PATH.
- with_gnu_ld=unknown
- ;;
- esac
-elif test "$with_gnu_ld" = yes; then
- { echo "$as_me:$LINENO: checking for GNU ld" >&5
-echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6; }
-else
- { echo "$as_me:$LINENO: checking for non-GNU ld" >&5
-echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6; }
-fi
-if test "${lt_cv_path_LD+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -z "$LD"; then
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
- for ac_dir in $PATH; do
- IFS="$lt_save_ifs"
- test -z "$ac_dir" && ac_dir=.
- if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
- lt_cv_path_LD="$ac_dir/$ac_prog"
- # Check to see if the program is GNU ld. I'd rather use --version,
- # but apparently some variants of GNU ld only accept -v.
- # Break only if it was the GNU/non-GNU ld that we prefer.
- case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
- *GNU* | *'with BFD'*)
- test "$with_gnu_ld" != no && break
- ;;
- *)
- test "$with_gnu_ld" != yes && break
- ;;
- esac
- fi
- done
- IFS="$lt_save_ifs"
-else
- lt_cv_path_LD="$LD" # Let the user override the test with a path.
-fi
-fi
-
-LD="$lt_cv_path_LD"
-if test -n "$LD"; then
- { echo "$as_me:$LINENO: result: $LD" >&5
-echo "${ECHO_T}$LD" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5
-echo "$as_me: error: no acceptable ld found in \$PATH" >&2;}
- { (exit 1); exit 1; }; }
-{ echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5
-echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6; }
-if test "${lt_cv_prog_gnu_ld+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- # I'd rather use --version here, but apparently some GNU lds only accept -v.
-case `$LD -v 2>&1 </dev/null` in
-*GNU* | *'with BFD'*)
- lt_cv_prog_gnu_ld=yes
- ;;
-*)
- lt_cv_prog_gnu_ld=no
- ;;
-esac
-fi
-{ echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5
-echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6; }
-with_gnu_ld=$lt_cv_prog_gnu_ld
-
-
-
- # Check if GNU C++ uses GNU ld as the underlying linker, since the
- # archiving commands below assume that GNU ld is being used.
- if test "$with_gnu_ld" = yes; then
- archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-
- hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir'
- export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
-
- # If archive_cmds runs LD, not CC, wlarc should be empty
- # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
- # investigate it a little bit more. (MM)
- wlarc='${wl}'
-
- # ancient GNU ld didn't support --whole-archive et. al.
- if eval "`$CC -print-prog-name=ld` --help 2>&1" | \
- grep 'no-whole-archive' > /dev/null; then
- whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
- else
- whole_archive_flag_spec_CXX=
- fi
- else
- with_gnu_ld=no
- wlarc=
-
- # A generic and very simple default shared library creation
- # command for GNU C++ for the case where it uses the native
- # linker, instead of GNU ld. If possible, this setting should
- # overridden to take advantage of the native linker features on
- # the platform it is being used on.
- archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
- fi
-
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
-
-else
- GXX=no
- with_gnu_ld=no
- wlarc=
-fi
-
-# PORTME: fill in a description of your system's C++ link characteristics
-{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
-echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; }
-ld_shlibs_CXX=yes
-case $host_os in
- aix3*)
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- ;;
- aix4* | aix5*)
- if test "$host_cpu" = ia64; then
- # On IA64, the linker does run time linking by default, so we don't
- # have to do anything special.
- aix_use_runtimelinking=no
- exp_sym_flag='-Bexport'
- no_entry_flag=""
- else
- aix_use_runtimelinking=no
-
- # Test if we are trying to use run time linking or normal
- # AIX style linking. If -brtl is somewhere in LDFLAGS, we
- # need to do runtime linking.
- case $host_os in aix4.[23]|aix4.[23].*|aix5*)
- for ld_flag in $LDFLAGS; do
- case $ld_flag in
- *-brtl*)
- aix_use_runtimelinking=yes
- break
- ;;
- esac
- done
- ;;
- esac
-
- exp_sym_flag='-bexport'
- no_entry_flag='-bnoentry'
- fi
-
- # When large executables or shared objects are built, AIX ld can
- # have problems creating the table of contents. If linking a library
- # or program results in "error TOC overflow" add -mminimal-toc to
- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-
- archive_cmds_CXX=''
- hardcode_direct_CXX=yes
- hardcode_libdir_separator_CXX=':'
- link_all_deplibs_CXX=yes
-
- if test "$GXX" = yes; then
- case $host_os in aix4.[012]|aix4.[012].*)
- # We only want to do this on AIX 4.2 and lower, the check
- # below for broken collect2 doesn't work under 4.3+
- collect2name=`${CC} -print-prog-name=collect2`
- if test -f "$collect2name" && \
- strings "$collect2name" | grep resolve_lib_name >/dev/null
- then
- # We have reworked collect2
- :
- else
- # We have old collect2
- hardcode_direct_CXX=unsupported
- # It fails to find uninstalled libraries when the uninstalled
- # path is not listed in the libpath. Setting hardcode_minus_L
- # to unsupported forces relinking
- hardcode_minus_L_CXX=yes
- hardcode_libdir_flag_spec_CXX='-L$libdir'
- hardcode_libdir_separator_CXX=
- fi
- ;;
- esac
- shared_flag='-shared'
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag="$shared_flag "'${wl}-G'
- fi
- else
- # not using gcc
- if test "$host_cpu" = ia64; then
- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
- # chokes on -Wl,-G. The following line is correct:
- shared_flag='-G'
- else
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag='${wl}-G'
- else
- shared_flag='${wl}-bM:SRE'
- fi
- fi
- fi
-
- # It seems that -bexpall does not export symbols beginning with
- # underscore (_), so it is better to generate a list of symbols to export.
- always_export_symbols_CXX=yes
- if test "$aix_use_runtimelinking" = yes; then
- # Warning - without using the other runtime loading flags (-brtl),
- # -berok will link without error, but may produce a broken library.
- allow_undefined_flag_CXX='-berok'
- # Determine the default libpath from the value encoded in an empty executable.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_cxx_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext &&
- $as_test_x conftest$ac_exeext; then
-
-lt_aix_libpath_sed='
- /Import File Strings/,/^$/ {
- /^0/ {
- s/^0 *\(.*\)$/\1/
- p
- }
- }'
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then
- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-fi
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-
- hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
-
- archive_expsym_cmds_CXX="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
- else
- if test "$host_cpu" = ia64; then
- hardcode_libdir_flag_spec_CXX='${wl}-R $libdir:/usr/lib:/lib'
- allow_undefined_flag_CXX="-z nodefs"
- archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
- else
- # Determine the default libpath from the value encoded in an empty executable.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_cxx_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext &&
- $as_test_x conftest$ac_exeext; then
-
-lt_aix_libpath_sed='
- /Import File Strings/,/^$/ {
- /^0/ {
- s/^0 *\(.*\)$/\1/
- p
- }
- }'
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then
- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-fi
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-
- hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
- # Warning - without using the other run time loading flags,
- # -berok will link without error, but may produce a broken library.
- no_undefined_flag_CXX=' ${wl}-bernotok'
- allow_undefined_flag_CXX=' ${wl}-berok'
- # Exported symbols can be pulled into shared objects from archives
- whole_archive_flag_spec_CXX='$convenience'
- archive_cmds_need_lc_CXX=yes
- # This is similar to how AIX traditionally builds its shared libraries.
- archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
- fi
- fi
- ;;
-
- beos*)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- allow_undefined_flag_CXX=unsupported
- # Joseph Beckenbach <jrb3 at best.com> says some releases of gcc
- # support --undefined. This deserves some investigation. FIXME
- archive_cmds_CXX='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- else
- ld_shlibs_CXX=no
- fi
- ;;
-
- chorus*)
- case $cc_basename in
- *)
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- ;;
- esac
- ;;
-
- cygwin* | mingw* | pw32*)
- # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless,
- # as there is no search path for DLLs.
- hardcode_libdir_flag_spec_CXX='-L$libdir'
- allow_undefined_flag_CXX=unsupported
- always_export_symbols_CXX=no
- enable_shared_with_static_runtimes_CXX=yes
-
- if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
- archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- # If the export-symbols file already is a .def file (1st line
- # is EXPORTS), use it as is; otherwise, prepend...
- archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
- cp $export_symbols $output_objdir/$soname.def;
- else
- echo EXPORTS > $output_objdir/$soname.def;
- cat $export_symbols >> $output_objdir/$soname.def;
- fi~
- $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- else
- ld_shlibs_CXX=no
- fi
- ;;
- darwin* | rhapsody*)
- case $host_os in
- rhapsody* | darwin1.[012])
- allow_undefined_flag_CXX='${wl}-undefined ${wl}suppress'
- ;;
- *) # Darwin 1.3 on
- if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
- allow_undefined_flag_CXX='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
- else
- case ${MACOSX_DEPLOYMENT_TARGET} in
- 10.[012])
- allow_undefined_flag_CXX='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
- ;;
- 10.*)
- allow_undefined_flag_CXX='${wl}-undefined ${wl}dynamic_lookup'
- ;;
- esac
- fi
- ;;
- esac
- archive_cmds_need_lc_CXX=no
- hardcode_direct_CXX=no
- hardcode_automatic_CXX=yes
- hardcode_shlibpath_var_CXX=unsupported
- whole_archive_flag_spec_CXX=''
- link_all_deplibs_CXX=yes
-
- if test "$GXX" = yes ; then
- lt_int_apple_cc_single_mod=no
- output_verbose_link_cmd='echo'
- if $CC -dumpspecs 2>&1 | $EGREP 'single_module' >/dev/null ; then
- lt_int_apple_cc_single_mod=yes
- fi
- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
- archive_cmds_CXX='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
- else
- archive_cmds_CXX='$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
- fi
- module_cmds_CXX='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
- archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- else
- archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- fi
- module_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- else
- case $cc_basename in
- xlc*)
- output_verbose_link_cmd='echo'
- archive_cmds_CXX='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
- module_cmds_CXX='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
- archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- module_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- ;;
- *)
- ld_shlibs_CXX=no
- ;;
- esac
- fi
- ;;
-
- dgux*)
- case $cc_basename in
- ec++*)
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- ;;
- ghcx*)
- # Green Hills C++ Compiler
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- ;;
- *)
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- ;;
- esac
- ;;
- freebsd[12]*)
- # C++ shared libraries reported to be fairly broken before switch to ELF
- ld_shlibs_CXX=no
- ;;
- freebsd-elf*)
- archive_cmds_need_lc_CXX=no
- ;;
- freebsd* | dragonfly*)
- # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
- # conventions
- ld_shlibs_CXX=yes
- ;;
- gnu*)
- ;;
- hpux9*)
- hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
- hardcode_libdir_separator_CXX=:
- export_dynamic_flag_spec_CXX='${wl}-E'
- hardcode_direct_CXX=yes
- hardcode_minus_L_CXX=yes # Not in the search PATH,
- # but as the default
- # location of the library.
-
- case $cc_basename in
- CC*)
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- ;;
- aCC*)
- archive_cmds_CXX='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- #
- # There doesn't appear to be a way to prevent this compiler from
- # explicitly linking system object files so we need to strip them
- # from the output so that they don't get included in the library
- # dependencies.
- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[-]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
- ;;
- *)
- if test "$GXX" = yes; then
- archive_cmds_CXX='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
- else
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- fi
- ;;
- esac
- ;;
- hpux10*|hpux11*)
- if test $with_gnu_ld = no; then
- hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
- hardcode_libdir_separator_CXX=:
-
- case $host_cpu in
- hppa*64*|ia64*) ;;
- *)
- export_dynamic_flag_spec_CXX='${wl}-E'
- ;;
- esac
- fi
- case $host_cpu in
- hppa*64*|ia64*)
- hardcode_direct_CXX=no
- hardcode_shlibpath_var_CXX=no
- ;;
- *)
- hardcode_direct_CXX=yes
- hardcode_minus_L_CXX=yes # Not in the search PATH,
- # but as the default
- # location of the library.
- ;;
- esac
-
- case $cc_basename in
- CC*)
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- ;;
- aCC*)
- case $host_cpu in
- hppa*64*)
- archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- ;;
- ia64*)
- archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- ;;
- *)
- archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- ;;
- esac
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- #
- # There doesn't appear to be a way to prevent this compiler from
- # explicitly linking system object files so we need to strip them
- # from the output so that they don't get included in the library
- # dependencies.
- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
- ;;
- *)
- if test "$GXX" = yes; then
- if test $with_gnu_ld = no; then
- case $host_cpu in
- hppa*64*)
- archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- ;;
- ia64*)
- archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- ;;
- *)
- archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- ;;
- esac
- fi
- else
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- fi
- ;;
- esac
- ;;
- interix[3-9]*)
- hardcode_direct_CXX=no
- hardcode_shlibpath_var_CXX=no
- hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
- export_dynamic_flag_spec_CXX='${wl}-E'
- # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
- # Instead, shared libraries are loaded at an image base (0x10000000 by
- # default) and relocated if they conflict, which is a slow very memory
- # consuming and fragmenting process. To avoid this, we pick a random,
- # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
- # time. Moving up from 0x10000000 also allows more sbrk(2) space.
- archive_cmds_CXX='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- archive_expsym_cmds_CXX='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- ;;
- irix5* | irix6*)
- case $cc_basename in
- CC*)
- # SGI C++
- archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-
- # Archives containing C++ object files must be created using
- # "CC -ar", where "CC" is the IRIX C++ compiler. This is
- # necessary to make sure instantiated templates are included
- # in the archive.
- old_archive_cmds_CXX='$CC -ar -WR,-u -o $oldlib $oldobjs'
- ;;
- *)
- if test "$GXX" = yes; then
- if test "$with_gnu_ld" = no; then
- archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- else
- archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib'
- fi
- fi
- link_all_deplibs_CXX=yes
- ;;
- esac
- hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator_CXX=:
- ;;
- linux* | k*bsd*-gnu)
- case $cc_basename in
- KCC*)
- # Kuck and Associates, Inc. (KAI) C++ Compiler
-
- # KCC will only create a shared library if the output file
- # ends with ".so" (or ".sl" for HP-UX), so rename the library
- # to its proper name (with version) after linking.
- archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
- archive_expsym_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- #
- # There doesn't appear to be a way to prevent this compiler from
- # explicitly linking system object files so we need to strip them
- # from the output so that they don't get included in the library
- # dependencies.
- output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-
- hardcode_libdir_flag_spec_CXX='${wl}--rpath,$libdir'
- export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
-
- # Archives containing C++ object files must be created using
- # "CC -Bstatic", where "CC" is the KAI C++ compiler.
- old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs'
- ;;
- icpc*)
- # Intel C++
- with_gnu_ld=yes
- # version 8.0 and above of icpc choke on multiply defined symbols
- # if we add $predep_objects and $postdep_objects, however 7.1 and
- # earlier do not add the objects themselves.
- case `$CC -V 2>&1` in
- *"Version 7."*)
- archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- ;;
- *) # Version 8.0 or newer
- tmp_idyn=
- case $host_cpu in
- ia64*) tmp_idyn=' -i_dynamic';;
- esac
- archive_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- ;;
- esac
- archive_cmds_need_lc_CXX=no
- hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
- export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
- whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
- ;;
- pgCC*)
- # Portland Group C++ compiler
- archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
- archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
-
- hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir'
- export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
- whole_archive_flag_spec_CXX='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
- ;;
- cxx*)
- # Compaq C++
- archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
-
- runpath_var=LD_RUN_PATH
- hardcode_libdir_flag_spec_CXX='-rpath $libdir'
- hardcode_libdir_separator_CXX=:
-
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- #
- # There doesn't appear to be a way to prevent this compiler from
- # explicitly linking system object files so we need to strip them
- # from the output so that they don't get included in the library
- # dependencies.
- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
- ;;
- *)
- case `$CC -V 2>&1 | sed 5q` in
- *Sun\ C*)
- # Sun C++ 5.9
- no_undefined_flag_CXX=' -zdefs'
- archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- archive_expsym_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
- hardcode_libdir_flag_spec_CXX='-R$libdir'
- whole_archive_flag_spec_CXX='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-
- # Not sure whether something based on
- # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
- # would be better.
- output_verbose_link_cmd='echo'
-
- # Archives containing C++ object files must be created using
- # "CC -xar", where "CC" is the Sun C++ compiler. This is
- # necessary to make sure instantiated templates are included
- # in the archive.
- old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs'
- ;;
- esac
- ;;
- esac
- ;;
- lynxos*)
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- ;;
- m88k*)
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- ;;
- mvs*)
- case $cc_basename in
- cxx*)
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- ;;
- *)
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- ;;
- esac
- ;;
- netbsd*)
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- archive_cmds_CXX='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
- wlarc=
- hardcode_libdir_flag_spec_CXX='-R$libdir'
- hardcode_direct_CXX=yes
- hardcode_shlibpath_var_CXX=no
- fi
- # Workaround some broken pre-1.5 toolchains
- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
- ;;
- openbsd2*)
- # C++ shared libraries are fairly broken
- ld_shlibs_CXX=no
- ;;
- openbsd*)
- if test -f /usr/libexec/ld.so; then
- hardcode_direct_CXX=yes
- hardcode_shlibpath_var_CXX=no
- archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
- hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
- export_dynamic_flag_spec_CXX='${wl}-E'
- whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
- fi
- output_verbose_link_cmd='echo'
- else
- ld_shlibs_CXX=no
- fi
- ;;
- osf3*)
- case $cc_basename in
- KCC*)
- # Kuck and Associates, Inc. (KAI) C++ Compiler
-
- # KCC will only create a shared library if the output file
- # ends with ".so" (or ".sl" for HP-UX), so rename the library
- # to its proper name (with version) after linking.
- archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-
- hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
- hardcode_libdir_separator_CXX=:
-
- # Archives containing C++ object files must be created using
- # "CC -Bstatic", where "CC" is the KAI C++ compiler.
- old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs'
-
- ;;
- RCC*)
- # Rational C++ 2.4.1
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- ;;
- cxx*)
- allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
- archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-
- hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator_CXX=:
-
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- #
- # There doesn't appear to be a way to prevent this compiler from
- # explicitly linking system object files so we need to strip them
- # from the output so that they don't get included in the library
- # dependencies.
- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
- ;;
- *)
- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
- allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
- archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-
- hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator_CXX=:
-
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
-
- else
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- fi
- ;;
- esac
- ;;
- osf4* | osf5*)
- case $cc_basename in
- KCC*)
- # Kuck and Associates, Inc. (KAI) C++ Compiler
-
- # KCC will only create a shared library if the output file
- # ends with ".so" (or ".sl" for HP-UX), so rename the library
- # to its proper name (with version) after linking.
- archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-
- hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
- hardcode_libdir_separator_CXX=:
-
- # Archives containing C++ object files must be created using
- # the KAI C++ compiler.
- old_archive_cmds_CXX='$CC -o $oldlib $oldobjs'
- ;;
- RCC*)
- # Rational C++ 2.4.1
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- ;;
- cxx*)
- allow_undefined_flag_CXX=' -expect_unresolved \*'
- archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
- archive_expsym_cmds_CXX='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
- echo "-hidden">> $lib.exp~
- $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~
- $rm $lib.exp'
-
- hardcode_libdir_flag_spec_CXX='-rpath $libdir'
- hardcode_libdir_separator_CXX=:
-
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- #
- # There doesn't appear to be a way to prevent this compiler from
- # explicitly linking system object files so we need to strip them
- # from the output so that they don't get included in the library
- # dependencies.
- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
- ;;
- *)
- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
- allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
- archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-
- hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator_CXX=:
-
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
-
- else
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- fi
- ;;
- esac
- ;;
- psos*)
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- ;;
- sunos4*)
- case $cc_basename in
- CC*)
- # Sun C++ 4.x
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- ;;
- lcc*)
- # Lucid
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- ;;
- *)
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- ;;
- esac
- ;;
- solaris*)
- case $cc_basename in
- CC*)
- # Sun C++ 4.2, 5.x and Centerline C++
- archive_cmds_need_lc_CXX=yes
- no_undefined_flag_CXX=' -zdefs'
- archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
- $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-
- hardcode_libdir_flag_spec_CXX='-R$libdir'
- hardcode_shlibpath_var_CXX=no
- case $host_os in
- solaris2.[0-5] | solaris2.[0-5].*) ;;
- *)
- # The compiler driver will combine and reorder linker options,
- # but understands `-z linker_flag'.
- # Supported since Solaris 2.6 (maybe 2.5.1?)
- whole_archive_flag_spec_CXX='-z allextract$convenience -z defaultextract'
- ;;
- esac
- link_all_deplibs_CXX=yes
-
- output_verbose_link_cmd='echo'
-
- # Archives containing C++ object files must be created using
- # "CC -xar", where "CC" is the Sun C++ compiler. This is
- # necessary to make sure instantiated templates are included
- # in the archive.
- old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs'
- ;;
- gcx*)
- # Green Hills C++ Compiler
- archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-
- # The C++ compiler must be used to create the archive.
- old_archive_cmds_CXX='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
- ;;
- *)
- # GNU C++ compiler with Solaris linker
- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
- no_undefined_flag_CXX=' ${wl}-z ${wl}defs'
- if $CC --version | grep -v '^2\.7' > /dev/null; then
- archive_cmds_CXX='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
- archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
- $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
- else
- # g++ 2.7 appears to require `-G' NOT `-shared' on this
- # platform.
- archive_cmds_CXX='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
- archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
- $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
- fi
-
- hardcode_libdir_flag_spec_CXX='${wl}-R $wl$libdir'
- case $host_os in
- solaris2.[0-5] | solaris2.[0-5].*) ;;
- *)
- whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
- ;;
- esac
- fi
- ;;
- esac
- ;;
- sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
- no_undefined_flag_CXX='${wl}-z,text'
- archive_cmds_need_lc_CXX=no
- hardcode_shlibpath_var_CXX=no
- runpath_var='LD_RUN_PATH'
-
- case $cc_basename in
- CC*)
- archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- *)
- archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- esac
- ;;
- sysv5* | sco3.2v5* | sco5v6*)
- # Note: We can NOT use -z defs as we might desire, because we do not
- # link with -lc, and that would cause any symbols used from libc to
- # always be unresolved, which means just about no library would
- # ever link correctly. If we're not using GNU ld we use -z text
- # though, which does catch some bad symbols but isn't as heavy-handed
- # as -z defs.
- # For security reasons, it is highly recommended that you always
- # use absolute paths for naming shared libraries, and exclude the
- # DT_RUNPATH tag from executables and libraries. But doing so
- # requires that you compile everything twice, which is a pain.
- # So that behaviour is only enabled if SCOABSPATH is set to a
- # non-empty value in the environment. Most likely only useful for
- # creating official distributions of packages.
- # This is a hack until libtool officially supports absolute path
- # names for shared libraries.
- no_undefined_flag_CXX='${wl}-z,text'
- allow_undefined_flag_CXX='${wl}-z,nodefs'
- archive_cmds_need_lc_CXX=no
- hardcode_shlibpath_var_CXX=no
- hardcode_libdir_flag_spec_CXX='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
- hardcode_libdir_separator_CXX=':'
- link_all_deplibs_CXX=yes
- export_dynamic_flag_spec_CXX='${wl}-Bexport'
- runpath_var='LD_RUN_PATH'
-
- case $cc_basename in
- CC*)
- archive_cmds_CXX='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- *)
- archive_cmds_CXX='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- esac
- ;;
- tandem*)
- case $cc_basename in
- NCC*)
- # NonStop-UX NCC 3.20
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- ;;
- *)
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- ;;
- esac
- ;;
- vxworks*)
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- ;;
- *)
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- ;;
-esac
-{ echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5
-echo "${ECHO_T}$ld_shlibs_CXX" >&6; }
-test "$ld_shlibs_CXX" = no && can_build_shared=no
-
-GCC_CXX="$GXX"
-LD_CXX="$LD"
-
-
-cat > conftest.$ac_ext <<EOF
-class Foo
-{
-public:
- Foo (void) { a = 0; }
-private:
- int a;
-};
-EOF
-
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
- # Parse the compiler output and extract the necessary
- # objects, libraries and library flags.
-
- # Sentinel used to keep track of whether or not we are before
- # the conftest object file.
- pre_test_object_deps_done=no
-
- # The `*' in the case matches for architectures that use `case' in
- # $output_verbose_cmd can trigger glob expansion during the loop
- # eval without this substitution.
- output_verbose_link_cmd=`$echo "X$output_verbose_link_cmd" | $Xsed -e "$no_glob_subst"`
-
- for p in `eval $output_verbose_link_cmd`; do
- case $p in
-
- -L* | -R* | -l*)
- # Some compilers place space between "-{L,R}" and the path.
- # Remove the space.
- if test $p = "-L" \
- || test $p = "-R"; then
- prev=$p
- continue
- else
- prev=
- fi
-
- if test "$pre_test_object_deps_done" = no; then
- case $p in
- -L* | -R*)
- # Internal compiler library paths should come after those
- # provided the user. The postdeps already come after the
- # user supplied libs so there is no need to process them.
- if test -z "$compiler_lib_search_path_CXX"; then
- compiler_lib_search_path_CXX="${prev}${p}"
- else
- compiler_lib_search_path_CXX="${compiler_lib_search_path_CXX} ${prev}${p}"
- fi
- ;;
- # The "-l" case would never come before the object being
- # linked, so don't bother handling this case.
- esac
- else
- if test -z "$postdeps_CXX"; then
- postdeps_CXX="${prev}${p}"
- else
- postdeps_CXX="${postdeps_CXX} ${prev}${p}"
- fi
- fi
- ;;
-
- *.$objext)
- # This assumes that the test object file only shows up
- # once in the compiler output.
- if test "$p" = "conftest.$objext"; then
- pre_test_object_deps_done=yes
- continue
- fi
-
- if test "$pre_test_object_deps_done" = no; then
- if test -z "$predep_objects_CXX"; then
- predep_objects_CXX="$p"
- else
- predep_objects_CXX="$predep_objects_CXX $p"
- fi
- else
- if test -z "$postdep_objects_CXX"; then
- postdep_objects_CXX="$p"
- else
- postdep_objects_CXX="$postdep_objects_CXX $p"
- fi
- fi
- ;;
-
- *) ;; # Ignore the rest.
-
- esac
- done
-
- # Clean up.
- rm -f a.out a.exe
-else
- echo "libtool.m4: error: problem compiling CXX test program"
-fi
-
-$rm -f confest.$objext
-
-# PORTME: override above test on systems where it is broken
-case $host_os in
-interix[3-9]*)
- # Interix 3.5 installs completely hosed .la files for C++, so rather than
- # hack all around it, let's just trust "g++" to DTRT.
- predep_objects_CXX=
- postdep_objects_CXX=
- postdeps_CXX=
- ;;
-
-linux*)
- case `$CC -V 2>&1 | sed 5q` in
- *Sun\ C*)
- # Sun C++ 5.9
- #
- # The more standards-conforming stlport4 library is
- # incompatible with the Cstd library. Avoid specifying
- # it if it's in CXXFLAGS. Ignore libCrun as
- # -library=stlport4 depends on it.
- case " $CXX $CXXFLAGS " in
- *" -library=stlport4 "*)
- solaris_use_stlport4=yes
- ;;
- esac
- if test "$solaris_use_stlport4" != yes; then
- postdeps_CXX='-library=Cstd -library=Crun'
- fi
- ;;
- esac
- ;;
-
-solaris*)
- case $cc_basename in
- CC*)
- # The more standards-conforming stlport4 library is
- # incompatible with the Cstd library. Avoid specifying
- # it if it's in CXXFLAGS. Ignore libCrun as
- # -library=stlport4 depends on it.
- case " $CXX $CXXFLAGS " in
- *" -library=stlport4 "*)
- solaris_use_stlport4=yes
- ;;
- esac
-
- # Adding this requires a known-good setup of shared libraries for
- # Sun compiler versions before 5.6, else PIC objects from an old
- # archive will be linked into the output, leading to subtle bugs.
- if test "$solaris_use_stlport4" != yes; then
- postdeps_CXX='-library=Cstd -library=Crun'
- fi
- ;;
- esac
- ;;
-esac
-
-
-case " $postdeps_CXX " in
-*" -lc "*) archive_cmds_need_lc_CXX=no ;;
-esac
-
-lt_prog_compiler_wl_CXX=
-lt_prog_compiler_pic_CXX=
-lt_prog_compiler_static_CXX=
-
-{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
-echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
-
- # C++ specific cases for pic, static, wl, etc.
- if test "$GXX" = yes; then
- lt_prog_compiler_wl_CXX='-Wl,'
- lt_prog_compiler_static_CXX='-static'
-
- case $host_os in
- aix*)
- # All AIX code is PIC.
- if test "$host_cpu" = ia64; then
- # AIX 5 now supports IA64 processor
- lt_prog_compiler_static_CXX='-Bstatic'
- fi
- ;;
- amigaos*)
- # FIXME: we need at least 68020 code to build shared libraries, but
- # adding the `-m68020' flag to GCC prevents building anything better,
- # like `-m68040'.
- lt_prog_compiler_pic_CXX='-m68020 -resident32 -malways-restore-a4'
- ;;
- beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
- # PIC is the default for these OSes.
- ;;
- mingw* | cygwin* | os2* | pw32*)
- # This hack is so that the source file can tell whether it is being
- # built for inclusion in a dll (and should export symbols for example).
- # Although the cygwin gcc ignores -fPIC, still need this for old-style
- # (--disable-auto-import) libraries
- lt_prog_compiler_pic_CXX='-DDLL_EXPORT'
- ;;
- darwin* | rhapsody*)
- # PIC is the default on this platform
- # Common symbols not allowed in MH_DYLIB files
- lt_prog_compiler_pic_CXX='-fno-common'
- ;;
- *djgpp*)
- # DJGPP does not support shared libraries at all
- lt_prog_compiler_pic_CXX=
- ;;
- interix[3-9]*)
- # Interix 3.x gcc -fpic/-fPIC options generate broken code.
- # Instead, we relocate shared libraries at runtime.
- ;;
- sysv4*MP*)
- if test -d /usr/nec; then
- lt_prog_compiler_pic_CXX=-Kconform_pic
- fi
- ;;
- hpux*)
- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
- # not for PA HP-UX.
- case $host_cpu in
- hppa*64*|ia64*)
- ;;
- *)
- lt_prog_compiler_pic_CXX='-fPIC'
- ;;
- esac
- ;;
- *)
- lt_prog_compiler_pic_CXX='-fPIC'
- ;;
- esac
- else
- case $host_os in
- aix4* | aix5*)
- # All AIX code is PIC.
- if test "$host_cpu" = ia64; then
- # AIX 5 now supports IA64 processor
- lt_prog_compiler_static_CXX='-Bstatic'
- else
- lt_prog_compiler_static_CXX='-bnso -bI:/lib/syscalls.exp'
- fi
- ;;
- chorus*)
- case $cc_basename in
- cxch68*)
- # Green Hills C++ Compiler
- # _LT_AC_TAGVAR(lt_prog_compiler_static, CXX)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
- ;;
- esac
- ;;
- darwin*)
- # PIC is the default on this platform
- # Common symbols not allowed in MH_DYLIB files
- case $cc_basename in
- xlc*)
- lt_prog_compiler_pic_CXX='-qnocommon'
- lt_prog_compiler_wl_CXX='-Wl,'
- ;;
- esac
- ;;
- dgux*)
- case $cc_basename in
- ec++*)
- lt_prog_compiler_pic_CXX='-KPIC'
- ;;
- ghcx*)
- # Green Hills C++ Compiler
- lt_prog_compiler_pic_CXX='-pic'
- ;;
- *)
- ;;
- esac
- ;;
- freebsd* | dragonfly*)
- # FreeBSD uses GNU C++
- ;;
- hpux9* | hpux10* | hpux11*)
- case $cc_basename in
- CC*)
- lt_prog_compiler_wl_CXX='-Wl,'
- lt_prog_compiler_static_CXX='${wl}-a ${wl}archive'
- if test "$host_cpu" != ia64; then
- lt_prog_compiler_pic_CXX='+Z'
- fi
- ;;
- aCC*)
- lt_prog_compiler_wl_CXX='-Wl,'
- lt_prog_compiler_static_CXX='${wl}-a ${wl}archive'
- case $host_cpu in
- hppa*64*|ia64*)
- # +Z the default
- ;;
- *)
- lt_prog_compiler_pic_CXX='+Z'
- ;;
- esac
- ;;
- *)
- ;;
- esac
- ;;
- interix*)
- # This is c89, which is MS Visual C++ (no shared libs)
- # Anyone wants to do a port?
- ;;
- irix5* | irix6* | nonstopux*)
- case $cc_basename in
- CC*)
- lt_prog_compiler_wl_CXX='-Wl,'
- lt_prog_compiler_static_CXX='-non_shared'
- # CC pic flag -KPIC is the default.
- ;;
- *)
- ;;
- esac
- ;;
- linux* | k*bsd*-gnu)
- case $cc_basename in
- KCC*)
- # KAI C++ Compiler
- lt_prog_compiler_wl_CXX='--backend -Wl,'
- lt_prog_compiler_pic_CXX='-fPIC'
- ;;
- icpc* | ecpc*)
- # Intel C++
- lt_prog_compiler_wl_CXX='-Wl,'
- lt_prog_compiler_pic_CXX='-KPIC'
- lt_prog_compiler_static_CXX='-static'
- ;;
- pgCC*)
- # Portland Group C++ compiler.
- lt_prog_compiler_wl_CXX='-Wl,'
- lt_prog_compiler_pic_CXX='-fpic'
- lt_prog_compiler_static_CXX='-Bstatic'
- ;;
- cxx*)
- # Compaq C++
- # Make sure the PIC flag is empty. It appears that all Alpha
- # Linux and Compaq Tru64 Unix objects are PIC.
- lt_prog_compiler_pic_CXX=
- lt_prog_compiler_static_CXX='-non_shared'
- ;;
- *)
- case `$CC -V 2>&1 | sed 5q` in
- *Sun\ C*)
- # Sun C++ 5.9
- lt_prog_compiler_pic_CXX='-KPIC'
- lt_prog_compiler_static_CXX='-Bstatic'
- lt_prog_compiler_wl_CXX='-Qoption ld '
- ;;
- esac
- ;;
- esac
- ;;
- lynxos*)
- ;;
- m88k*)
- ;;
- mvs*)
- case $cc_basename in
- cxx*)
- lt_prog_compiler_pic_CXX='-W c,exportall'
- ;;
- *)
- ;;
- esac
- ;;
- netbsd*)
- ;;
- osf3* | osf4* | osf5*)
- case $cc_basename in
- KCC*)
- lt_prog_compiler_wl_CXX='--backend -Wl,'
- ;;
- RCC*)
- # Rational C++ 2.4.1
- lt_prog_compiler_pic_CXX='-pic'
- ;;
- cxx*)
- # Digital/Compaq C++
- lt_prog_compiler_wl_CXX='-Wl,'
- # Make sure the PIC flag is empty. It appears that all Alpha
- # Linux and Compaq Tru64 Unix objects are PIC.
- lt_prog_compiler_pic_CXX=
- lt_prog_compiler_static_CXX='-non_shared'
- ;;
- *)
- ;;
- esac
- ;;
- psos*)
- ;;
- solaris*)
- case $cc_basename in
- CC*)
- # Sun C++ 4.2, 5.x and Centerline C++
- lt_prog_compiler_pic_CXX='-KPIC'
- lt_prog_compiler_static_CXX='-Bstatic'
- lt_prog_compiler_wl_CXX='-Qoption ld '
- ;;
- gcx*)
- # Green Hills C++ Compiler
- lt_prog_compiler_pic_CXX='-PIC'
- ;;
- *)
- ;;
- esac
- ;;
- sunos4*)
- case $cc_basename in
- CC*)
- # Sun C++ 4.x
- lt_prog_compiler_pic_CXX='-pic'
- lt_prog_compiler_static_CXX='-Bstatic'
- ;;
- lcc*)
- # Lucid
- lt_prog_compiler_pic_CXX='-pic'
- ;;
- *)
- ;;
- esac
- ;;
- tandem*)
- case $cc_basename in
- NCC*)
- # NonStop-UX NCC 3.20
- lt_prog_compiler_pic_CXX='-KPIC'
- ;;
- *)
- ;;
- esac
- ;;
- sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
- case $cc_basename in
- CC*)
- lt_prog_compiler_wl_CXX='-Wl,'
- lt_prog_compiler_pic_CXX='-KPIC'
- lt_prog_compiler_static_CXX='-Bstatic'
- ;;
- esac
- ;;
- vxworks*)
- ;;
- *)
- lt_prog_compiler_can_build_shared_CXX=no
- ;;
- esac
- fi
-
-{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_CXX" >&5
-echo "${ECHO_T}$lt_prog_compiler_pic_CXX" >&6; }
-
-#
-# Check to make sure the PIC flag actually works.
-#
-if test -n "$lt_prog_compiler_pic_CXX"; then
-
-{ echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5
-echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works... $ECHO_C" >&6; }
-if test "${lt_prog_compiler_pic_works_CXX+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- lt_prog_compiler_pic_works_CXX=no
- ac_outfile=conftest.$ac_objext
- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
- lt_compiler_flag="$lt_prog_compiler_pic_CXX -DPIC"
- # Insert the option either (1) after the last *FLAGS variable, or
- # (2) before a word containing "conftest.", or (3) at the end.
- # Note that $ac_compile itself does not contain backslashes and begins
- # with a dollar sign (not a hyphen), so the echo should work correctly.
- # The option is referenced via a variable to avoid confusing sed.
- lt_compile=`echo "$ac_compile" | $SED \
- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
- -e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:11709: $lt_compile\"" >&5)
- (eval "$lt_compile" 2>conftest.err)
- ac_status=$?
- cat conftest.err >&5
- echo "$as_me:11713: \$? = $ac_status" >&5
- if (exit $ac_status) && test -s "$ac_outfile"; then
- # The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings other than the usual output.
- $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
- if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
- lt_prog_compiler_pic_works_CXX=yes
- fi
- fi
- $rm conftest*
-
-fi
-{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_CXX" >&5
-echo "${ECHO_T}$lt_prog_compiler_pic_works_CXX" >&6; }
-
-if test x"$lt_prog_compiler_pic_works_CXX" = xyes; then
- case $lt_prog_compiler_pic_CXX in
- "" | " "*) ;;
- *) lt_prog_compiler_pic_CXX=" $lt_prog_compiler_pic_CXX" ;;
- esac
-else
- lt_prog_compiler_pic_CXX=
- lt_prog_compiler_can_build_shared_CXX=no
-fi
-
-fi
-case $host_os in
- # For platforms which do not support PIC, -DPIC is meaningless:
- *djgpp*)
- lt_prog_compiler_pic_CXX=
- ;;
- *)
- lt_prog_compiler_pic_CXX="$lt_prog_compiler_pic_CXX -DPIC"
- ;;
-esac
-
-#
-# Check to make sure the static flag actually works.
-#
-wl=$lt_prog_compiler_wl_CXX eval lt_tmp_static_flag=\"$lt_prog_compiler_static_CXX\"
-{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
-echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; }
-if test "${lt_prog_compiler_static_works_CXX+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- lt_prog_compiler_static_works_CXX=no
- save_LDFLAGS="$LDFLAGS"
- LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
- echo "$lt_simple_link_test_code" > conftest.$ac_ext
- if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
- # The linker can only warn and ignore the option if not recognized
- # So say no if there are warnings
- if test -s conftest.err; then
- # Append any errors to the config.log.
- cat conftest.err 1>&5
- $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
- if diff conftest.exp conftest.er2 >/dev/null; then
- lt_prog_compiler_static_works_CXX=yes
- fi
- else
- lt_prog_compiler_static_works_CXX=yes
- fi
- fi
- $rm conftest*
- LDFLAGS="$save_LDFLAGS"
-
-fi
-{ echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works_CXX" >&5
-echo "${ECHO_T}$lt_prog_compiler_static_works_CXX" >&6; }
-
-if test x"$lt_prog_compiler_static_works_CXX" = xyes; then
- :
-else
- lt_prog_compiler_static_CXX=
-fi
-
-
-{ echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
-echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; }
-if test "${lt_cv_prog_compiler_c_o_CXX+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- lt_cv_prog_compiler_c_o_CXX=no
- $rm -r conftest 2>/dev/null
- mkdir conftest
- cd conftest
- mkdir out
- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-
- lt_compiler_flag="-o out/conftest2.$ac_objext"
- # Insert the option either (1) after the last *FLAGS variable, or
- # (2) before a word containing "conftest.", or (3) at the end.
- # Note that $ac_compile itself does not contain backslashes and begins
- # with a dollar sign (not a hyphen), so the echo should work correctly.
- lt_compile=`echo "$ac_compile" | $SED \
- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
- -e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:11813: $lt_compile\"" >&5)
- (eval "$lt_compile" 2>out/conftest.err)
- ac_status=$?
- cat out/conftest.err >&5
- echo "$as_me:11817: \$? = $ac_status" >&5
- if (exit $ac_status) && test -s out/conftest2.$ac_objext
- then
- # The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings
- $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
- $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
- if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
- lt_cv_prog_compiler_c_o_CXX=yes
- fi
- fi
- chmod u+w . 2>&5
- $rm conftest*
- # SGI C++ compiler will create directory out/ii_files/ for
- # template instantiation
- test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
- $rm out/* && rmdir out
- cd ..
- rmdir conftest
- $rm conftest*
-
-fi
-{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_CXX" >&5
-echo "${ECHO_T}$lt_cv_prog_compiler_c_o_CXX" >&6; }
-
-
-hard_links="nottested"
-if test "$lt_cv_prog_compiler_c_o_CXX" = no && test "$need_locks" != no; then
- # do not overwrite the value of need_locks provided by the user
- { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
-echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; }
- hard_links=yes
- $rm conftest*
- ln conftest.a conftest.b 2>/dev/null && hard_links=no
- touch conftest.a
- ln conftest.a conftest.b 2>&5 || hard_links=no
- ln conftest.a conftest.b 2>/dev/null && hard_links=no
- { echo "$as_me:$LINENO: result: $hard_links" >&5
-echo "${ECHO_T}$hard_links" >&6; }
- if test "$hard_links" = no; then
- { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
-echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
- need_locks=warn
- fi
-else
- need_locks=no
-fi
-
-{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
-echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; }
-
- export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
- case $host_os in
- aix4* | aix5*)
- # If we're using GNU nm, then we don't want the "-C" option.
- # -C means demangle to AIX nm, but means don't demangle with GNU nm
- if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
- export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
- else
- export_symbols_cmds_CXX='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
- fi
- ;;
- pw32*)
- export_symbols_cmds_CXX="$ltdll_cmds"
- ;;
- cygwin* | mingw*)
- export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;/^.*[ ]__nm__/s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
- ;;
- *)
- export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
- ;;
- esac
-
-{ echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5
-echo "${ECHO_T}$ld_shlibs_CXX" >&6; }
-test "$ld_shlibs_CXX" = no && can_build_shared=no
-
-#
-# Do we need to explicitly link libc?
-#
-case "x$archive_cmds_need_lc_CXX" in
-x|xyes)
- # Assume -lc should be added
- archive_cmds_need_lc_CXX=yes
-
- if test "$enable_shared" = yes && test "$GCC" = yes; then
- case $archive_cmds_CXX in
- *'~'*)
- # FIXME: we may have to deal with multi-command sequences.
- ;;
- '$CC '*)
- # Test whether the compiler implicitly links with -lc since on some
- # systems, -lgcc has to come before -lc. If gcc already passes -lc
- # to ld, don't add -lc before -lgcc.
- { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
-echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; }
- $rm conftest*
- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-
- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } 2>conftest.err; then
- soname=conftest
- lib=conftest
- libobjs=conftest.$ac_objext
- deplibs=
- wl=$lt_prog_compiler_wl_CXX
- pic_flag=$lt_prog_compiler_pic_CXX
- compiler_flags=-v
- linker_flags=-v
- verstring=
- output_objdir=.
- libname=conftest
- lt_save_allow_undefined_flag=$allow_undefined_flag_CXX
- allow_undefined_flag_CXX=
- if { (eval echo "$as_me:$LINENO: \"$archive_cmds_CXX 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
- (eval $archive_cmds_CXX 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
- then
- archive_cmds_need_lc_CXX=no
- else
- archive_cmds_need_lc_CXX=yes
- fi
- allow_undefined_flag_CXX=$lt_save_allow_undefined_flag
- else
- cat conftest.err 1>&5
- fi
- $rm conftest*
- { echo "$as_me:$LINENO: result: $archive_cmds_need_lc_CXX" >&5
-echo "${ECHO_T}$archive_cmds_need_lc_CXX" >&6; }
- ;;
- esac
- fi
- ;;
-esac
-
-{ echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
-echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; }
-library_names_spec=
-libname_spec='lib$name'
-soname_spec=
-shrext_cmds=".so"
-postinstall_cmds=
-postuninstall_cmds=
-finish_cmds=
-finish_eval=
-shlibpath_var=
-shlibpath_overrides_runpath=unknown
-version_type=none
-dynamic_linker="$host_os ld.so"
-sys_lib_dlsearch_path_spec="/lib /usr/lib"
-
-need_lib_prefix=unknown
-hardcode_into_libs=no
-
-# when you set need_version to no, make sure it does not cause -set_version
-# flags to be left without arguments
-need_version=unknown
-
-case $host_os in
-aix3*)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
- shlibpath_var=LIBPATH
-
- # AIX 3 has no versioning support, so we append a major version to the name.
- soname_spec='${libname}${release}${shared_ext}$major'
- ;;
-
-aix4* | aix5*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- hardcode_into_libs=yes
- if test "$host_cpu" = ia64; then
- # AIX 5 supports IA64
- library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
- shlibpath_var=LD_LIBRARY_PATH
- else
- # With GCC up to 2.95.x, collect2 would create an import file
- # for dependence libraries. The import file would start with
- # the line `#! .'. This would cause the generated library to
- # depend on `.', always an invalid library. This was fixed in
- # development snapshots of GCC prior to 3.0.
- case $host_os in
- aix4 | aix4.[01] | aix4.[01].*)
- if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
- echo ' yes '
- echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
- :
- else
- can_build_shared=no
- fi
- ;;
- esac
- # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
- # soname into executable. Probably we can add versioning support to
- # collect2, so additional links can be useful in future.
- if test "$aix_use_runtimelinking" = yes; then
- # If using run time linking (on AIX 4.2 or later) use lib<name>.so
- # instead of lib<name>.a to let people know that these are not
- # typical AIX shared libraries.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- else
- # We preserve .a as extension for shared libraries through AIX4.2
- # and later when we are not doing run time linking.
- library_names_spec='${libname}${release}.a $libname.a'
- soname_spec='${libname}${release}${shared_ext}$major'
- fi
- shlibpath_var=LIBPATH
- fi
- ;;
-
-amigaos*)
- library_names_spec='$libname.ixlibrary $libname.a'
- # Create ${libname}_ixlibrary.a entries in /sys/libs.
- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
- ;;
-
-beos*)
- library_names_spec='${libname}${shared_ext}'
- dynamic_linker="$host_os ld.so"
- shlibpath_var=LIBRARY_PATH
- ;;
-
-bsdi[45]*)
- version_type=linux
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
- sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
- # the default ld.so.conf also contains /usr/contrib/lib and
- # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
- # libtool to hard-code these into programs
- ;;
-
-cygwin* | mingw* | pw32*)
- version_type=windows
- shrext_cmds=".dll"
- need_version=no
- need_lib_prefix=no
-
- case $GCC,$host_os in
- yes,cygwin* | yes,mingw* | yes,pw32*)
- library_names_spec='$libname.dll.a'
- # DLL is installed to $(libdir)/../bin by postinstall_cmds
- postinstall_cmds='base_file=`basename \${file}`~
- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
- dldir=$destdir/`dirname \$dlpath`~
- test -d \$dldir || mkdir -p \$dldir~
- $install_prog $dir/$dlname \$dldir/$dlname~
- chmod a+x \$dldir/$dlname'
- postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
- dlpath=$dir/\$dldll~
- $rm \$dlpath'
- shlibpath_overrides_runpath=yes
-
- case $host_os in
- cygwin*)
- # Cygwin DLLs use 'cyg' prefix rather than 'lib'
- soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
- sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
- ;;
- mingw*)
- # MinGW DLLs use traditional 'lib' prefix
- soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
- if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
- # It is most probably a Windows format PATH printed by
- # mingw gcc, but we are running on Cygwin. Gcc prints its search
- # path with ; separators, and with drive letters. We can handle the
- # drive letters (cygwin fileutils understands them), so leave them,
- # especially as we might pass files found there to a mingw objdump,
- # which wouldn't understand a cygwinified path. Ahh.
- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
- else
- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
- fi
- ;;
- pw32*)
- # pw32 DLLs use 'pw' prefix rather than 'lib'
- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
- ;;
- esac
- ;;
-
- *)
- library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
- ;;
- esac
- dynamic_linker='Win32 ld.exe'
- # FIXME: first we should search . and the directory the executable is in
- shlibpath_var=PATH
- ;;
-
-darwin* | rhapsody*)
- dynamic_linker="$host_os dyld"
- version_type=darwin
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
- soname_spec='${libname}${release}${major}$shared_ext'
- shlibpath_overrides_runpath=yes
- shlibpath_var=DYLD_LIBRARY_PATH
- shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
-
- sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
- ;;
-
-dgux*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- ;;
-
-freebsd1*)
- dynamic_linker=no
- ;;
-
-freebsd* | dragonfly*)
- # DragonFly does not have aout. When/if they implement a new
- # versioning mechanism, adjust this.
- if test -x /usr/bin/objformat; then
- objformat=`/usr/bin/objformat`
- else
- case $host_os in
- freebsd[123]*) objformat=aout ;;
- *) objformat=elf ;;
- esac
- fi
- version_type=freebsd-$objformat
- case $version_type in
- freebsd-elf*)
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
- need_version=no
- need_lib_prefix=no
- ;;
- freebsd-*)
- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
- need_version=yes
- ;;
- esac
- shlibpath_var=LD_LIBRARY_PATH
- case $host_os in
- freebsd2*)
- shlibpath_overrides_runpath=yes
- ;;
- freebsd3.[01]* | freebsdelf3.[01]*)
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- ;;
- freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
- freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- ;;
- *) # from 4.6 on, and DragonFly
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- ;;
- esac
- ;;
-
-gnu*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- hardcode_into_libs=yes
- ;;
-
-hpux9* | hpux10* | hpux11*)
- # Give a soname corresponding to the major version so that dld.sl refuses to
- # link against other versions.
- version_type=sunos
- need_lib_prefix=no
- need_version=no
- case $host_cpu in
- ia64*)
- shrext_cmds='.so'
- hardcode_into_libs=yes
- dynamic_linker="$host_os dld.so"
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- if test "X$HPUX_IA64_MODE" = X32; then
- sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
- else
- sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
- fi
- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
- ;;
- hppa*64*)
- shrext_cmds='.sl'
- hardcode_into_libs=yes
- dynamic_linker="$host_os dld.sl"
- shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
- ;;
- *)
- shrext_cmds='.sl'
- dynamic_linker="$host_os dld.sl"
- shlibpath_var=SHLIB_PATH
- shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- ;;
- esac
- # HP-UX runs *really* slowly unless shared libraries are mode 555.
- postinstall_cmds='chmod 555 $lib'
- ;;
-
-interix[3-9]*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- ;;
-
-irix5* | irix6* | nonstopux*)
- case $host_os in
- nonstopux*) version_type=nonstopux ;;
- *)
- if test "$lt_cv_prog_gnu_ld" = yes; then
- version_type=linux
- else
- version_type=irix
- fi ;;
- esac
- need_lib_prefix=no
- need_version=no
- soname_spec='${libname}${release}${shared_ext}$major'
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
- case $host_os in
- irix5* | nonstopux*)
- libsuff= shlibsuff=
- ;;
- *)
- case $LD in # libtool.m4 will add one of these switches to LD
- *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
- libsuff= shlibsuff= libmagic=32-bit;;
- *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
- libsuff=32 shlibsuff=N32 libmagic=N32;;
- *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
- libsuff=64 shlibsuff=64 libmagic=64-bit;;
- *) libsuff= shlibsuff= libmagic=never-match;;
- esac
- ;;
- esac
- shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
- shlibpath_overrides_runpath=no
- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
- hardcode_into_libs=yes
- ;;
-
-# No shared lib support for Linux oldld, aout, or coff.
-linux*oldld* | linux*aout* | linux*coff*)
- dynamic_linker=no
- ;;
-
-# This must be Linux ELF.
-linux* | k*bsd*-gnu)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- # This implies no fast_install, which is unacceptable.
- # Some rework will be needed to allow for fast_install
- # before this can be enabled.
- hardcode_into_libs=yes
-
- # Append ld.so.conf contents to the search path
- if test -f /etc/ld.so.conf; then
- lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
- sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
- fi
-
- # We used to test for /lib/ld.so.1 and disable shared libraries on
- # powerpc, because MkLinux only supported shared libraries with the
- # GNU dynamic linker. Since this was broken with cross compilers,
- # most powerpc-linux boxes support dynamic linking these days and
- # people can always --disable-shared, the test was removed, and we
- # assume the GNU/Linux dynamic linker is in use.
- dynamic_linker='GNU/Linux ld.so'
- ;;
-
-netbsd*)
- version_type=sunos
- need_lib_prefix=no
- need_version=no
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
- dynamic_linker='NetBSD (a.out) ld.so'
- else
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- dynamic_linker='NetBSD ld.elf_so'
- fi
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- ;;
-
-newsos6)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- ;;
-
-nto-qnx*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- ;;
-
-openbsd*)
- version_type=sunos
- sys_lib_dlsearch_path_spec="/usr/lib"
- need_lib_prefix=no
- # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
- case $host_os in
- openbsd3.3 | openbsd3.3.*) need_version=yes ;;
- *) need_version=no ;;
- esac
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- case $host_os in
- openbsd2.[89] | openbsd2.[89].*)
- shlibpath_overrides_runpath=no
- ;;
- *)
- shlibpath_overrides_runpath=yes
- ;;
- esac
- else
- shlibpath_overrides_runpath=yes
- fi
- ;;
-
-os2*)
- libname_spec='$name'
- shrext_cmds=".dll"
- need_lib_prefix=no
- library_names_spec='$libname${shared_ext} $libname.a'
- dynamic_linker='OS/2 ld.exe'
- shlibpath_var=LIBPATH
- ;;
-
-osf3* | osf4* | osf5*)
- version_type=osf
- need_lib_prefix=no
- need_version=no
- soname_spec='${libname}${release}${shared_ext}$major'
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- shlibpath_var=LD_LIBRARY_PATH
- sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
- sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
- ;;
-
-rdos*)
- dynamic_linker=no
- ;;
-
-solaris*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- # ldd complains unless libraries are executable
- postinstall_cmds='chmod +x $lib'
- ;;
-
-sunos4*)
- version_type=sunos
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
- finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- if test "$with_gnu_ld" = yes; then
- need_lib_prefix=no
- fi
- need_version=yes
- ;;
-
-sysv4 | sysv4.3*)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- case $host_vendor in
- sni)
- shlibpath_overrides_runpath=no
- need_lib_prefix=no
- export_dynamic_flag_spec='${wl}-Blargedynsym'
- runpath_var=LD_RUN_PATH
- ;;
- siemens)
- need_lib_prefix=no
- ;;
- motorola)
- need_lib_prefix=no
- need_version=no
- shlibpath_overrides_runpath=no
- sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
- ;;
- esac
- ;;
-
-sysv4*MP*)
- if test -d /usr/nec ;then
- version_type=linux
- library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
- soname_spec='$libname${shared_ext}.$major'
- shlibpath_var=LD_LIBRARY_PATH
- fi
- ;;
-
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
- version_type=freebsd-elf
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- hardcode_into_libs=yes
- if test "$with_gnu_ld" = yes; then
- sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
- shlibpath_overrides_runpath=no
- else
- sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
- shlibpath_overrides_runpath=yes
- case $host_os in
- sco3.2v5*)
- sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
- ;;
- esac
- fi
- sys_lib_dlsearch_path_spec='/usr/lib'
- ;;
-
-uts4*)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- ;;
-
-*)
- dynamic_linker=no
- ;;
-esac
-{ echo "$as_me:$LINENO: result: $dynamic_linker" >&5
-echo "${ECHO_T}$dynamic_linker" >&6; }
-test "$dynamic_linker" = no && can_build_shared=no
-
-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
- variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-fi
-
-{ echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
-echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; }
-hardcode_action_CXX=
-if test -n "$hardcode_libdir_flag_spec_CXX" || \
- test -n "$runpath_var_CXX" || \
- test "X$hardcode_automatic_CXX" = "Xyes" ; then
-
- # We can hardcode non-existant directories.
- if test "$hardcode_direct_CXX" != no &&
- # If the only mechanism to avoid hardcoding is shlibpath_var, we
- # have to relink, otherwise we might link with an installed library
- # when we should be linking with a yet-to-be-installed one
- ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, CXX)" != no &&
- test "$hardcode_minus_L_CXX" != no; then
- # Linking always hardcodes the temporary library directory.
- hardcode_action_CXX=relink
- else
- # We can link without hardcoding, and we can hardcode nonexisting dirs.
- hardcode_action_CXX=immediate
- fi
-else
- # We cannot hardcode anything, or else we can only hardcode existing
- # directories.
- hardcode_action_CXX=unsupported
-fi
-{ echo "$as_me:$LINENO: result: $hardcode_action_CXX" >&5
-echo "${ECHO_T}$hardcode_action_CXX" >&6; }
-
-if test "$hardcode_action_CXX" = relink; then
- # Fast installation is not supported
- enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
- test "$enable_shared" = no; then
- # Fast installation is not necessary
- enable_fast_install=needless
-fi
-
-
-# The else clause should only fire when bootstrapping the
-# libtool distribution, otherwise you forgot to ship ltmain.sh
-# with your package, and you will get complaints that there are
-# no rules to generate ltmain.sh.
-if test -f "$ltmain"; then
- # See if we are running on zsh, and set the options which allow our commands through
- # without removal of \ escapes.
- if test -n "${ZSH_VERSION+set}" ; then
- setopt NO_GLOB_SUBST
- fi
- # Now quote all the things that may contain metacharacters while being
- # careful not to overquote the AC_SUBSTed values. We take copies of the
- # variables and quote the copies for generation of the libtool script.
- for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
- SED SHELL STRIP \
- libname_spec library_names_spec soname_spec extract_expsyms_cmds \
- old_striplib striplib file_magic_cmd finish_cmds finish_eval \
- deplibs_check_method reload_flag reload_cmds need_locks \
- lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
- lt_cv_sys_global_symbol_to_c_name_address \
- sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
- old_postinstall_cmds old_postuninstall_cmds \
- compiler_CXX \
- CC_CXX \
- LD_CXX \
- lt_prog_compiler_wl_CXX \
- lt_prog_compiler_pic_CXX \
- lt_prog_compiler_static_CXX \
- lt_prog_compiler_no_builtin_flag_CXX \
- export_dynamic_flag_spec_CXX \
- thread_safe_flag_spec_CXX \
- whole_archive_flag_spec_CXX \
- enable_shared_with_static_runtimes_CXX \
- old_archive_cmds_CXX \
- old_archive_from_new_cmds_CXX \
- predep_objects_CXX \
- postdep_objects_CXX \
- predeps_CXX \
- postdeps_CXX \
- compiler_lib_search_path_CXX \
- archive_cmds_CXX \
- archive_expsym_cmds_CXX \
- postinstall_cmds_CXX \
- postuninstall_cmds_CXX \
- old_archive_from_expsyms_cmds_CXX \
- allow_undefined_flag_CXX \
- no_undefined_flag_CXX \
- export_symbols_cmds_CXX \
- hardcode_libdir_flag_spec_CXX \
- hardcode_libdir_flag_spec_ld_CXX \
- hardcode_libdir_separator_CXX \
- hardcode_automatic_CXX \
- module_cmds_CXX \
- module_expsym_cmds_CXX \
- lt_cv_prog_compiler_c_o_CXX \
- fix_srcfile_path_CXX \
- exclude_expsyms_CXX \
- include_expsyms_CXX; do
-
- case $var in
- old_archive_cmds_CXX | \
- old_archive_from_new_cmds_CXX | \
- archive_cmds_CXX | \
- archive_expsym_cmds_CXX | \
- module_cmds_CXX | \
- module_expsym_cmds_CXX | \
- old_archive_from_expsyms_cmds_CXX | \
- export_symbols_cmds_CXX | \
- extract_expsyms_cmds | reload_cmds | finish_cmds | \
- postinstall_cmds | postuninstall_cmds | \
- old_postinstall_cmds | old_postuninstall_cmds | \
- sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
- # Double-quote double-evaled strings.
- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
- ;;
- *)
- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
- ;;
- esac
- done
-
- case $lt_echo in
- *'\$0 --fallback-echo"')
- lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
- ;;
- esac
-
-cfgfile="$ofile"
-
- cat <<__EOF__ >> "$cfgfile"
-# ### BEGIN LIBTOOL TAG CONFIG: $tagname
-
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-
-# Shell to use when invoking shell scripts.
-SHELL=$lt_SHELL
-
-# Whether or not to build shared libraries.
-build_libtool_libs=$enable_shared
-
-# Whether or not to build static libraries.
-build_old_libs=$enable_static
-
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=$archive_cmds_need_lc_CXX
-
-# Whether or not to disallow shared libs when runtime libs are static
-allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_CXX
-
-# Whether or not to optimize for fast installation.
-fast_install=$enable_fast_install
-
-# The host system.
-host_alias=$host_alias
-host=$host
-host_os=$host_os
-
-# The build system.
-build_alias=$build_alias
-build=$build
-build_os=$build_os
-
-# An echo program that does not interpret backslashes.
-echo=$lt_echo
-
-# The archiver.
-AR=$lt_AR
-AR_FLAGS=$lt_AR_FLAGS
-
-# A C compiler.
-LTCC=$lt_LTCC
-
-# LTCC compiler flags.
-LTCFLAGS=$lt_LTCFLAGS
-
-# A language-specific compiler.
-CC=$lt_compiler_CXX
-
-# Is the compiler the GNU C compiler?
-with_gcc=$GCC_CXX
-
-# An ERE matcher.
-EGREP=$lt_EGREP
-
-# The linker used to build libraries.
-LD=$lt_LD_CXX
-
-# Whether we need hard or soft links.
-LN_S=$lt_LN_S
-
-# A BSD-compatible nm program.
-NM=$lt_NM
-
-# A symbol stripping program
-STRIP=$lt_STRIP
-
-# Used to examine libraries when file_magic_cmd begins "file"
-MAGIC_CMD=$MAGIC_CMD
-
-# Used on cygwin: DLL creation program.
-DLLTOOL="$DLLTOOL"
-
-# Used on cygwin: object dumper.
-OBJDUMP="$OBJDUMP"
-
-# Used on cygwin: assembler.
-AS="$AS"
-
-# The name of the directory that contains temporary libtool files.
-objdir=$objdir
-
-# How to create reloadable object files.
-reload_flag=$lt_reload_flag
-reload_cmds=$lt_reload_cmds
-
-# How to pass a linker flag through the compiler.
-wl=$lt_lt_prog_compiler_wl_CXX
-
-# Object file suffix (normally "o").
-objext="$ac_objext"
-
-# Old archive suffix (normally "a").
-libext="$libext"
-
-# Shared library suffix (normally ".so").
-shrext_cmds='$shrext_cmds'
-
-# Executable file suffix (normally "").
-exeext="$exeext"
-
-# Additional compiler flags for building library objects.
-pic_flag=$lt_lt_prog_compiler_pic_CXX
-pic_mode=$pic_mode
-
-# What is the maximum length of a command?
-max_cmd_len=$lt_cv_sys_max_cmd_len
-
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o=$lt_lt_cv_prog_compiler_c_o_CXX
-
-# Must we lock files when doing compilation?
-need_locks=$lt_need_locks
-
-# Do we need the lib prefix for modules?
-need_lib_prefix=$need_lib_prefix
-
-# Do we need a version for libraries?
-need_version=$need_version
-
-# Whether dlopen is supported.
-dlopen_support=$enable_dlopen
-
-# Whether dlopen of programs is supported.
-dlopen_self=$enable_dlopen_self
-
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=$enable_dlopen_self_static
-
-# Compiler flag to prevent dynamic linking.
-link_static_flag=$lt_lt_prog_compiler_static_CXX
-
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_CXX
-
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_CXX
-
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec=$lt_whole_archive_flag_spec_CXX
-
-# Compiler flag to generate thread-safe objects.
-thread_safe_flag_spec=$lt_thread_safe_flag_spec_CXX
-
-# Library versioning type.
-version_type=$version_type
-
-# Format of library name prefix.
-libname_spec=$lt_libname_spec
-
-# List of archive names. First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME.
-library_names_spec=$lt_library_names_spec
-
-# The coded name of the library, if different from the real name.
-soname_spec=$lt_soname_spec
-
-# Commands used to build and install an old-style archive.
-RANLIB=$lt_RANLIB
-old_archive_cmds=$lt_old_archive_cmds_CXX
-old_postinstall_cmds=$lt_old_postinstall_cmds
-old_postuninstall_cmds=$lt_old_postuninstall_cmds
-
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_CXX
-
-# Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_CXX
-
-# Commands used to build and install a shared archive.
-archive_cmds=$lt_archive_cmds_CXX
-archive_expsym_cmds=$lt_archive_expsym_cmds_CXX
-postinstall_cmds=$lt_postinstall_cmds
-postuninstall_cmds=$lt_postuninstall_cmds
-
-# Commands used to build a loadable module (assumed same as above if empty)
-module_cmds=$lt_module_cmds_CXX
-module_expsym_cmds=$lt_module_expsym_cmds_CXX
-
-# Commands to strip libraries.
-old_striplib=$lt_old_striplib
-striplib=$lt_striplib
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predep_objects=$lt_predep_objects_CXX
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdep_objects=$lt_postdep_objects_CXX
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predeps=$lt_predeps_CXX
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdeps=$lt_postdeps_CXX
-
-# The library search path used internally by the compiler when linking
-# a shared library.
-compiler_lib_search_path=$lt_compiler_lib_search_path_CXX
-
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method=$lt_deplibs_check_method
-
-# Command to use when deplibs_check_method == file_magic.
-file_magic_cmd=$lt_file_magic_cmd
-
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=$lt_allow_undefined_flag_CXX
-
-# Flag that forces no undefined symbols.
-no_undefined_flag=$lt_no_undefined_flag_CXX
-
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds=$lt_finish_cmds
-
-# Same as above, but a single script fragment to be evaled but not shown.
-finish_eval=$lt_finish_eval
-
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-
-# Transform the output of nm in a proper C declaration
-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-
-# Transform the output of nm in a C name address pair
-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-
-# This is the shared library runtime path variable.
-runpath_var=$runpath_var
-
-# This is the shared library path variable.
-shlibpath_var=$shlibpath_var
-
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-
-# How to hardcode a shared library path into an executable.
-hardcode_action=$hardcode_action_CXX
-
-# Whether we should hardcode library paths into libraries.
-hardcode_into_libs=$hardcode_into_libs
-
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_CXX
-
-# If ld is used when linking, flag to hardcode \$libdir into
-# a binary during linking. This must work even if \$libdir does
-# not exist.
-hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_CXX
-
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX
-
-# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct=$hardcode_direct_CXX
-
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L=$hardcode_minus_L_CXX
-
-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-# the resulting binary.
-hardcode_shlibpath_var=$hardcode_shlibpath_var_CXX
-
-# Set to yes if building a shared library automatically hardcodes DIR into the library
-# and all subsequent libraries and executables linked against it.
-hardcode_automatic=$hardcode_automatic_CXX
-
-# Variables whose values should be saved in libtool wrapper scripts and
-# restored at relink time.
-variables_saved_for_relink="$variables_saved_for_relink"
-
-# Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=$link_all_deplibs_CXX
-
-# Compile-time system search path for libraries
-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-
-# Run-time system search path for libraries
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-
-# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path=$lt_fix_srcfile_path
-
-# Set to yes if exported symbols are required.
-always_export_symbols=$always_export_symbols_CXX
-
-# The commands to list exported symbols.
-export_symbols_cmds=$lt_export_symbols_cmds_CXX
-
-# The commands to extract the exported symbol list from a shared archive.
-extract_expsyms_cmds=$lt_extract_expsyms_cmds
-
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms=$lt_exclude_expsyms_CXX
-
-# Symbols that must always be exported.
-include_expsyms=$lt_include_expsyms_CXX
-
-# ### END LIBTOOL TAG CONFIG: $tagname
-
-__EOF__
-
-
-else
- # If there is no Makefile yet, we rely on a make rule to execute
- # `config.status --recheck' to rerun these tests and create the
- # libtool script then.
- ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
- if test -f "$ltmain_in"; then
- test -f Makefile && make "$ltmain"
- fi
-fi
-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-CC=$lt_save_CC
-LDCXX=$LD
-LD=$lt_save_LD
-GCC=$lt_save_GCC
-with_gnu_ldcxx=$with_gnu_ld
-with_gnu_ld=$lt_save_with_gnu_ld
-lt_cv_path_LDCXX=$lt_cv_path_LD
-lt_cv_path_LD=$lt_save_path_LD
-lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
-lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
-
- else
- tagname=""
- fi
- ;;
-
- F77)
- if test -n "$F77" && test "X$F77" != "Xno"; then
-
-ac_ext=f
-ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5'
-ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_f77_compiler_gnu
-
-
-archive_cmds_need_lc_F77=no
-allow_undefined_flag_F77=
-always_export_symbols_F77=no
-archive_expsym_cmds_F77=
-export_dynamic_flag_spec_F77=
-hardcode_direct_F77=no
-hardcode_libdir_flag_spec_F77=
-hardcode_libdir_flag_spec_ld_F77=
-hardcode_libdir_separator_F77=
-hardcode_minus_L_F77=no
-hardcode_automatic_F77=no
-module_cmds_F77=
-module_expsym_cmds_F77=
-link_all_deplibs_F77=unknown
-old_archive_cmds_F77=$old_archive_cmds
-no_undefined_flag_F77=
-whole_archive_flag_spec_F77=
-enable_shared_with_static_runtimes_F77=no
-
-# Source file extension for f77 test sources.
-ac_ext=f
-
-# Object file extension for compiled f77 test sources.
-objext=o
-objext_F77=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="\
- subroutine t
- return
- end
-"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code="\
- program t
- end
-"
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-
-# If no C compiler was specified, use CC.
-LTCC=${LTCC-"$CC"}
-
-# If no C compiler flags were specified, use CFLAGS.
-LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-
-# Allow CC to be a program name with arguments.
-compiler=$CC
-
-
-# save warnings/boilerplate of simple test code
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_compile_test_code" >conftest.$ac_ext
-eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_compiler_boilerplate=`cat conftest.err`
-$rm conftest*
-
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_link_test_code" >conftest.$ac_ext
-eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_linker_boilerplate=`cat conftest.err`
-$rm conftest*
-
-
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-CC=${F77-"f77"}
-compiler=$CC
-compiler_F77=$CC
-for cc_temp in $compiler""; do
- case $cc_temp in
- compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
- distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
- \-*) ;;
- *) break;;
- esac
-done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-
-
-{ echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5
-echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6; }
-{ echo "$as_me:$LINENO: result: $can_build_shared" >&5
-echo "${ECHO_T}$can_build_shared" >&6; }
-
-{ echo "$as_me:$LINENO: checking whether to build shared libraries" >&5
-echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6; }
-test "$can_build_shared" = "no" && enable_shared=no
-
-# On AIX, shared libraries and static libraries use the same namespace, and
-# are all built from PIC.
-case $host_os in
-aix3*)
- test "$enable_shared" = yes && enable_static=no
- if test -n "$RANLIB"; then
- archive_cmds="$archive_cmds~\$RANLIB \$lib"
- postinstall_cmds='$RANLIB $lib'
- fi
- ;;
-aix4* | aix5*)
- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
- test "$enable_shared" = yes && enable_static=no
- fi
- ;;
-esac
-{ echo "$as_me:$LINENO: result: $enable_shared" >&5
-echo "${ECHO_T}$enable_shared" >&6; }
-
-{ echo "$as_me:$LINENO: checking whether to build static libraries" >&5
-echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6; }
-# Make sure either enable_shared or enable_static is yes.
-test "$enable_shared" = yes || enable_static=yes
-{ echo "$as_me:$LINENO: result: $enable_static" >&5
-echo "${ECHO_T}$enable_static" >&6; }
-
-GCC_F77="$G77"
-LD_F77="$LD"
-
-lt_prog_compiler_wl_F77=
-lt_prog_compiler_pic_F77=
-lt_prog_compiler_static_F77=
-
-{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
-echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
-
- if test "$GCC" = yes; then
- lt_prog_compiler_wl_F77='-Wl,'
- lt_prog_compiler_static_F77='-static'
-
- case $host_os in
- aix*)
- # All AIX code is PIC.
- if test "$host_cpu" = ia64; then
- # AIX 5 now supports IA64 processor
- lt_prog_compiler_static_F77='-Bstatic'
- fi
- ;;
-
- amigaos*)
- # FIXME: we need at least 68020 code to build shared libraries, but
- # adding the `-m68020' flag to GCC prevents building anything better,
- # like `-m68040'.
- lt_prog_compiler_pic_F77='-m68020 -resident32 -malways-restore-a4'
- ;;
-
- beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
- # PIC is the default for these OSes.
- ;;
-
- mingw* | cygwin* | pw32* | os2*)
- # This hack is so that the source file can tell whether it is being
- # built for inclusion in a dll (and should export symbols for example).
- # Although the cygwin gcc ignores -fPIC, still need this for old-style
- # (--disable-auto-import) libraries
- lt_prog_compiler_pic_F77='-DDLL_EXPORT'
- ;;
-
- darwin* | rhapsody*)
- # PIC is the default on this platform
- # Common symbols not allowed in MH_DYLIB files
- lt_prog_compiler_pic_F77='-fno-common'
- ;;
-
- interix[3-9]*)
- # Interix 3.x gcc -fpic/-fPIC options generate broken code.
- # Instead, we relocate shared libraries at runtime.
- ;;
-
- msdosdjgpp*)
- # Just because we use GCC doesn't mean we suddenly get shared libraries
- # on systems that don't support them.
- lt_prog_compiler_can_build_shared_F77=no
- enable_shared=no
- ;;
-
- sysv4*MP*)
- if test -d /usr/nec; then
- lt_prog_compiler_pic_F77=-Kconform_pic
- fi
- ;;
-
- hpux*)
- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
- # not for PA HP-UX.
- case $host_cpu in
- hppa*64*|ia64*)
- # +Z the default
- ;;
- *)
- lt_prog_compiler_pic_F77='-fPIC'
- ;;
- esac
- ;;
-
- *)
- lt_prog_compiler_pic_F77='-fPIC'
- ;;
- esac
- else
- # PORTME Check for flag to pass linker flags through the system compiler.
- case $host_os in
- aix*)
- lt_prog_compiler_wl_F77='-Wl,'
- if test "$host_cpu" = ia64; then
- # AIX 5 now supports IA64 processor
- lt_prog_compiler_static_F77='-Bstatic'
- else
- lt_prog_compiler_static_F77='-bnso -bI:/lib/syscalls.exp'
- fi
- ;;
- darwin*)
- # PIC is the default on this platform
- # Common symbols not allowed in MH_DYLIB files
- case $cc_basename in
- xlc*)
- lt_prog_compiler_pic_F77='-qnocommon'
- lt_prog_compiler_wl_F77='-Wl,'
- ;;
- esac
- ;;
-
- mingw* | cygwin* | pw32* | os2*)
- # This hack is so that the source file can tell whether it is being
- # built for inclusion in a dll (and should export symbols for example).
- lt_prog_compiler_pic_F77='-DDLL_EXPORT'
- ;;
-
- hpux9* | hpux10* | hpux11*)
- lt_prog_compiler_wl_F77='-Wl,'
- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
- # not for PA HP-UX.
- case $host_cpu in
- hppa*64*|ia64*)
- # +Z the default
- ;;
- *)
- lt_prog_compiler_pic_F77='+Z'
- ;;
- esac
- # Is there a better lt_prog_compiler_static that works with the bundled CC?
- lt_prog_compiler_static_F77='${wl}-a ${wl}archive'
- ;;
-
- irix5* | irix6* | nonstopux*)
- lt_prog_compiler_wl_F77='-Wl,'
- # PIC (with -KPIC) is the default.
- lt_prog_compiler_static_F77='-non_shared'
- ;;
-
- newsos6)
- lt_prog_compiler_pic_F77='-KPIC'
- lt_prog_compiler_static_F77='-Bstatic'
- ;;
-
- linux* | k*bsd*-gnu)
- case $cc_basename in
- icc* | ecc*)
- lt_prog_compiler_wl_F77='-Wl,'
- lt_prog_compiler_pic_F77='-KPIC'
- lt_prog_compiler_static_F77='-static'
- ;;
- pgcc* | pgf77* | pgf90* | pgf95*)
- # Portland Group compilers (*not* the Pentium gcc compiler,
- # which looks to be a dead project)
- lt_prog_compiler_wl_F77='-Wl,'
- lt_prog_compiler_pic_F77='-fpic'
- lt_prog_compiler_static_F77='-Bstatic'
- ;;
- ccc*)
- lt_prog_compiler_wl_F77='-Wl,'
- # All Alpha code is PIC.
- lt_prog_compiler_static_F77='-non_shared'
- ;;
- *)
- case `$CC -V 2>&1 | sed 5q` in
- *Sun\ C*)
- # Sun C 5.9
- lt_prog_compiler_pic_F77='-KPIC'
- lt_prog_compiler_static_F77='-Bstatic'
- lt_prog_compiler_wl_F77='-Wl,'
- ;;
- *Sun\ F*)
- # Sun Fortran 8.3 passes all unrecognized flags to the linker
- lt_prog_compiler_pic_F77='-KPIC'
- lt_prog_compiler_static_F77='-Bstatic'
- lt_prog_compiler_wl_F77=''
- ;;
- esac
- ;;
- esac
- ;;
-
- osf3* | osf4* | osf5*)
- lt_prog_compiler_wl_F77='-Wl,'
- # All OSF/1 code is PIC.
- lt_prog_compiler_static_F77='-non_shared'
- ;;
-
- rdos*)
- lt_prog_compiler_static_F77='-non_shared'
- ;;
-
- solaris*)
- lt_prog_compiler_pic_F77='-KPIC'
- lt_prog_compiler_static_F77='-Bstatic'
- case $cc_basename in
- f77* | f90* | f95*)
- lt_prog_compiler_wl_F77='-Qoption ld ';;
- *)
- lt_prog_compiler_wl_F77='-Wl,';;
- esac
- ;;
-
- sunos4*)
- lt_prog_compiler_wl_F77='-Qoption ld '
- lt_prog_compiler_pic_F77='-PIC'
- lt_prog_compiler_static_F77='-Bstatic'
- ;;
-
- sysv4 | sysv4.2uw2* | sysv4.3*)
- lt_prog_compiler_wl_F77='-Wl,'
- lt_prog_compiler_pic_F77='-KPIC'
- lt_prog_compiler_static_F77='-Bstatic'
- ;;
-
- sysv4*MP*)
- if test -d /usr/nec ;then
- lt_prog_compiler_pic_F77='-Kconform_pic'
- lt_prog_compiler_static_F77='-Bstatic'
- fi
- ;;
-
- sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
- lt_prog_compiler_wl_F77='-Wl,'
- lt_prog_compiler_pic_F77='-KPIC'
- lt_prog_compiler_static_F77='-Bstatic'
- ;;
-
- unicos*)
- lt_prog_compiler_wl_F77='-Wl,'
- lt_prog_compiler_can_build_shared_F77=no
- ;;
-
- uts4*)
- lt_prog_compiler_pic_F77='-pic'
- lt_prog_compiler_static_F77='-Bstatic'
- ;;
-
- *)
- lt_prog_compiler_can_build_shared_F77=no
- ;;
- esac
- fi
-
-{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_F77" >&5
-echo "${ECHO_T}$lt_prog_compiler_pic_F77" >&6; }
-
-#
-# Check to make sure the PIC flag actually works.
-#
-if test -n "$lt_prog_compiler_pic_F77"; then
-
-{ echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works" >&5
-echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works... $ECHO_C" >&6; }
-if test "${lt_prog_compiler_pic_works_F77+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- lt_prog_compiler_pic_works_F77=no
- ac_outfile=conftest.$ac_objext
- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
- lt_compiler_flag="$lt_prog_compiler_pic_F77"
- # Insert the option either (1) after the last *FLAGS variable, or
- # (2) before a word containing "conftest.", or (3) at the end.
- # Note that $ac_compile itself does not contain backslashes and begins
- # with a dollar sign (not a hyphen), so the echo should work correctly.
- # The option is referenced via a variable to avoid confusing sed.
- lt_compile=`echo "$ac_compile" | $SED \
- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
- -e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:13375: $lt_compile\"" >&5)
- (eval "$lt_compile" 2>conftest.err)
- ac_status=$?
- cat conftest.err >&5
- echo "$as_me:13379: \$? = $ac_status" >&5
- if (exit $ac_status) && test -s "$ac_outfile"; then
- # The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings other than the usual output.
- $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
- if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
- lt_prog_compiler_pic_works_F77=yes
- fi
- fi
- $rm conftest*
-
-fi
-{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_F77" >&5
-echo "${ECHO_T}$lt_prog_compiler_pic_works_F77" >&6; }
-
-if test x"$lt_prog_compiler_pic_works_F77" = xyes; then
- case $lt_prog_compiler_pic_F77 in
- "" | " "*) ;;
- *) lt_prog_compiler_pic_F77=" $lt_prog_compiler_pic_F77" ;;
- esac
-else
- lt_prog_compiler_pic_F77=
- lt_prog_compiler_can_build_shared_F77=no
-fi
-
-fi
-case $host_os in
- # For platforms which do not support PIC, -DPIC is meaningless:
- *djgpp*)
- lt_prog_compiler_pic_F77=
- ;;
- *)
- lt_prog_compiler_pic_F77="$lt_prog_compiler_pic_F77"
- ;;
-esac
-
-#
-# Check to make sure the static flag actually works.
-#
-wl=$lt_prog_compiler_wl_F77 eval lt_tmp_static_flag=\"$lt_prog_compiler_static_F77\"
-{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
-echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; }
-if test "${lt_prog_compiler_static_works_F77+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- lt_prog_compiler_static_works_F77=no
- save_LDFLAGS="$LDFLAGS"
- LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
- echo "$lt_simple_link_test_code" > conftest.$ac_ext
- if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
- # The linker can only warn and ignore the option if not recognized
- # So say no if there are warnings
- if test -s conftest.err; then
- # Append any errors to the config.log.
- cat conftest.err 1>&5
- $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
- if diff conftest.exp conftest.er2 >/dev/null; then
- lt_prog_compiler_static_works_F77=yes
- fi
- else
- lt_prog_compiler_static_works_F77=yes
- fi
- fi
- $rm conftest*
- LDFLAGS="$save_LDFLAGS"
-
-fi
-{ echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works_F77" >&5
-echo "${ECHO_T}$lt_prog_compiler_static_works_F77" >&6; }
-
-if test x"$lt_prog_compiler_static_works_F77" = xyes; then
- :
-else
- lt_prog_compiler_static_F77=
-fi
-
-
-{ echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
-echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; }
-if test "${lt_cv_prog_compiler_c_o_F77+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- lt_cv_prog_compiler_c_o_F77=no
- $rm -r conftest 2>/dev/null
- mkdir conftest
- cd conftest
- mkdir out
- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-
- lt_compiler_flag="-o out/conftest2.$ac_objext"
- # Insert the option either (1) after the last *FLAGS variable, or
- # (2) before a word containing "conftest.", or (3) at the end.
- # Note that $ac_compile itself does not contain backslashes and begins
- # with a dollar sign (not a hyphen), so the echo should work correctly.
- lt_compile=`echo "$ac_compile" | $SED \
- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
- -e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:13479: $lt_compile\"" >&5)
- (eval "$lt_compile" 2>out/conftest.err)
- ac_status=$?
- cat out/conftest.err >&5
- echo "$as_me:13483: \$? = $ac_status" >&5
- if (exit $ac_status) && test -s out/conftest2.$ac_objext
- then
- # The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings
- $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
- $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
- if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
- lt_cv_prog_compiler_c_o_F77=yes
- fi
- fi
- chmod u+w . 2>&5
- $rm conftest*
- # SGI C++ compiler will create directory out/ii_files/ for
- # template instantiation
- test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
- $rm out/* && rmdir out
- cd ..
- rmdir conftest
- $rm conftest*
-
-fi
-{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_F77" >&5
-echo "${ECHO_T}$lt_cv_prog_compiler_c_o_F77" >&6; }
-
-
-hard_links="nottested"
-if test "$lt_cv_prog_compiler_c_o_F77" = no && test "$need_locks" != no; then
- # do not overwrite the value of need_locks provided by the user
- { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
-echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; }
- hard_links=yes
- $rm conftest*
- ln conftest.a conftest.b 2>/dev/null && hard_links=no
- touch conftest.a
- ln conftest.a conftest.b 2>&5 || hard_links=no
- ln conftest.a conftest.b 2>/dev/null && hard_links=no
- { echo "$as_me:$LINENO: result: $hard_links" >&5
-echo "${ECHO_T}$hard_links" >&6; }
- if test "$hard_links" = no; then
- { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
-echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
- need_locks=warn
- fi
-else
- need_locks=no
-fi
-
-{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
-echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; }
-
- runpath_var=
- allow_undefined_flag_F77=
- enable_shared_with_static_runtimes_F77=no
- archive_cmds_F77=
- archive_expsym_cmds_F77=
- old_archive_From_new_cmds_F77=
- old_archive_from_expsyms_cmds_F77=
- export_dynamic_flag_spec_F77=
- whole_archive_flag_spec_F77=
- thread_safe_flag_spec_F77=
- hardcode_libdir_flag_spec_F77=
- hardcode_libdir_flag_spec_ld_F77=
- hardcode_libdir_separator_F77=
- hardcode_direct_F77=no
- hardcode_minus_L_F77=no
- hardcode_shlibpath_var_F77=unsupported
- link_all_deplibs_F77=unknown
- hardcode_automatic_F77=no
- module_cmds_F77=
- module_expsym_cmds_F77=
- always_export_symbols_F77=no
- export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
- # include_expsyms should be a list of space-separated symbols to be *always*
- # included in the symbol list
- include_expsyms_F77=
- # exclude_expsyms can be an extended regexp of symbols to exclude
- # it will be wrapped by ` (' and `)$', so one must not match beginning or
- # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
- # as well as any symbol that contains `d'.
- exclude_expsyms_F77="_GLOBAL_OFFSET_TABLE_"
- # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
- # platforms (ab)use it in PIC code, but their linkers get confused if
- # the symbol is explicitly referenced. Since portable code cannot
- # rely on this symbol name, it's probably fine to never include it in
- # preloaded symbol tables.
- extract_expsyms_cmds=
- # Just being paranoid about ensuring that cc_basename is set.
- for cc_temp in $compiler""; do
- case $cc_temp in
- compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
- distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
- \-*) ;;
- *) break;;
- esac
-done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-
- case $host_os in
- cygwin* | mingw* | pw32*)
- # FIXME: the MSVC++ port hasn't been tested in a loooong time
- # When not using gcc, we currently assume that we are using
- # Microsoft Visual C++.
- if test "$GCC" != yes; then
- with_gnu_ld=no
- fi
- ;;
- interix*)
- # we just hope/assume this is gcc and not c89 (= MSVC++)
- with_gnu_ld=yes
- ;;
- openbsd*)
- with_gnu_ld=no
- ;;
- esac
-
- ld_shlibs_F77=yes
- if test "$with_gnu_ld" = yes; then
- # If archive_cmds runs LD, not CC, wlarc should be empty
- wlarc='${wl}'
-
- # Set some defaults for GNU ld with shared library support. These
- # are reset later if shared libraries are not supported. Putting them
- # here allows them to be overridden if necessary.
- runpath_var=LD_RUN_PATH
- hardcode_libdir_flag_spec_F77='${wl}--rpath ${wl}$libdir'
- export_dynamic_flag_spec_F77='${wl}--export-dynamic'
- # ancient GNU ld didn't support --whole-archive et. al.
- if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
- whole_archive_flag_spec_F77="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
- else
- whole_archive_flag_spec_F77=
- fi
- supports_anon_versioning=no
- case `$LD -v 2>/dev/null` in
- *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
- *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
- *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
- *\ 2.11.*) ;; # other 2.11 versions
- *) supports_anon_versioning=yes ;;
- esac
-
- # See if GNU ld supports shared libraries.
- case $host_os in
- aix3* | aix4* | aix5*)
- # On AIX/PPC, the GNU linker is very broken
- if test "$host_cpu" != ia64; then
- ld_shlibs_F77=no
- cat <<EOF 1>&2
-
-*** Warning: the GNU linker, at least up to release 2.9.1, is reported
-*** to be unable to reliably create shared libraries on AIX.
-*** Therefore, libtool is disabling shared libraries support. If you
-*** really care for shared libraries, you may want to modify your PATH
-*** so that a non-GNU linker is found, and then restart.
-
-EOF
- fi
- ;;
-
- amigaos*)
- archive_cmds_F77='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
- hardcode_libdir_flag_spec_F77='-L$libdir'
- hardcode_minus_L_F77=yes
-
- # Samuel A. Falvo II <kc5tja at dolphin.openprojects.net> reports
- # that the semantics of dynamic libraries on AmigaOS, at least up
- # to version 4, is to share data among multiple programs linked
- # with the same dynamic library. Since this doesn't match the
- # behavior of shared libraries on other platforms, we can't use
- # them.
- ld_shlibs_F77=no
- ;;
-
- beos*)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- allow_undefined_flag_F77=unsupported
- # Joseph Beckenbach <jrb3 at best.com> says some releases of gcc
- # support --undefined. This deserves some investigation. FIXME
- archive_cmds_F77='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- else
- ld_shlibs_F77=no
- fi
- ;;
-
- cygwin* | mingw* | pw32*)
- # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, F77) is actually meaningless,
- # as there is no search path for DLLs.
- hardcode_libdir_flag_spec_F77='-L$libdir'
- allow_undefined_flag_F77=unsupported
- always_export_symbols_F77=no
- enable_shared_with_static_runtimes_F77=yes
- export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
-
- if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
- archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- # If the export-symbols file already is a .def file (1st line
- # is EXPORTS), use it as is; otherwise, prepend...
- archive_expsym_cmds_F77='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
- cp $export_symbols $output_objdir/$soname.def;
- else
- echo EXPORTS > $output_objdir/$soname.def;
- cat $export_symbols >> $output_objdir/$soname.def;
- fi~
- $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- else
- ld_shlibs_F77=no
- fi
- ;;
-
- interix[3-9]*)
- hardcode_direct_F77=no
- hardcode_shlibpath_var_F77=no
- hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
- export_dynamic_flag_spec_F77='${wl}-E'
- # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
- # Instead, shared libraries are loaded at an image base (0x10000000 by
- # default) and relocated if they conflict, which is a slow very memory
- # consuming and fragmenting process. To avoid this, we pick a random,
- # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
- # time. Moving up from 0x10000000 also allows more sbrk(2) space.
- archive_cmds_F77='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- archive_expsym_cmds_F77='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- ;;
-
- gnu* | linux* | k*bsd*-gnu)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- tmp_addflag=
- case $cc_basename,$host_cpu in
- pgcc*) # Portland Group C compiler
- whole_archive_flag_spec_F77='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
- tmp_addflag=' $pic_flag'
- ;;
- pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers
- whole_archive_flag_spec_F77='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
- tmp_addflag=' $pic_flag -Mnomain' ;;
- ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
- tmp_addflag=' -i_dynamic' ;;
- efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64
- tmp_addflag=' -i_dynamic -nofor_main' ;;
- ifc* | ifort*) # Intel Fortran compiler
- tmp_addflag=' -nofor_main' ;;
- esac
- case `$CC -V 2>&1 | sed 5q` in
- *Sun\ C*) # Sun C 5.9
- whole_archive_flag_spec_F77='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
- tmp_sharedflag='-G' ;;
- *Sun\ F*) # Sun Fortran 8.3
- tmp_sharedflag='-G' ;;
- *)
- tmp_sharedflag='-shared' ;;
- esac
- archive_cmds_F77='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-
- if test $supports_anon_versioning = yes; then
- archive_expsym_cmds_F77='$echo "{ global:" > $output_objdir/$libname.ver~
- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
- $echo "local: *; };" >> $output_objdir/$libname.ver~
- $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
- fi
- else
- ld_shlibs_F77=no
- fi
- ;;
-
- netbsd*)
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- archive_cmds_F77='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
- wlarc=
- else
- archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- fi
- ;;
-
- solaris*)
- if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
- ld_shlibs_F77=no
- cat <<EOF 1>&2
-
-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
-*** create shared libraries on Solaris systems. Therefore, libtool
-*** is disabling shared libraries support. We urge you to upgrade GNU
-*** binutils to release 2.9.1 or newer. Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
-
-EOF
- elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- else
- ld_shlibs_F77=no
- fi
- ;;
-
- sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
- case `$LD -v 2>&1` in
- *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
- ld_shlibs_F77=no
- cat <<_LT_EOF 1>&2
-
-*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
-*** reliably create shared libraries on SCO systems. Therefore, libtool
-*** is disabling shared libraries support. We urge you to upgrade GNU
-*** binutils to release 2.16.91.0.3 or newer. Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
-
-_LT_EOF
- ;;
- *)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- hardcode_libdir_flag_spec_F77='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
- archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
- archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
- else
- ld_shlibs_F77=no
- fi
- ;;
- esac
- ;;
-
- sunos4*)
- archive_cmds_F77='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- wlarc=
- hardcode_direct_F77=yes
- hardcode_shlibpath_var_F77=no
- ;;
-
- *)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- else
- ld_shlibs_F77=no
- fi
- ;;
- esac
-
- if test "$ld_shlibs_F77" = no; then
- runpath_var=
- hardcode_libdir_flag_spec_F77=
- export_dynamic_flag_spec_F77=
- whole_archive_flag_spec_F77=
- fi
- else
- # PORTME fill in a description of your system's linker (not GNU ld)
- case $host_os in
- aix3*)
- allow_undefined_flag_F77=unsupported
- always_export_symbols_F77=yes
- archive_expsym_cmds_F77='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
- # Note: this linker hardcodes the directories in LIBPATH if there
- # are no directories specified by -L.
- hardcode_minus_L_F77=yes
- if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
- # Neither direct hardcoding nor static linking is supported with a
- # broken collect2.
- hardcode_direct_F77=unsupported
- fi
- ;;
-
- aix4* | aix5*)
- if test "$host_cpu" = ia64; then
- # On IA64, the linker does run time linking by default, so we don't
- # have to do anything special.
- aix_use_runtimelinking=no
- exp_sym_flag='-Bexport'
- no_entry_flag=""
- else
- # If we're using GNU nm, then we don't want the "-C" option.
- # -C means demangle to AIX nm, but means don't demangle with GNU nm
- if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
- export_symbols_cmds_F77='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
- else
- export_symbols_cmds_F77='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
- fi
- aix_use_runtimelinking=no
-
- # Test if we are trying to use run time linking or normal
- # AIX style linking. If -brtl is somewhere in LDFLAGS, we
- # need to do runtime linking.
- case $host_os in aix4.[23]|aix4.[23].*|aix5*)
- for ld_flag in $LDFLAGS; do
- if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
- aix_use_runtimelinking=yes
- break
- fi
- done
- ;;
- esac
-
- exp_sym_flag='-bexport'
- no_entry_flag='-bnoentry'
- fi
-
- # When large executables or shared objects are built, AIX ld can
- # have problems creating the table of contents. If linking a library
- # or program results in "error TOC overflow" add -mminimal-toc to
- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-
- archive_cmds_F77=''
- hardcode_direct_F77=yes
- hardcode_libdir_separator_F77=':'
- link_all_deplibs_F77=yes
-
- if test "$GCC" = yes; then
- case $host_os in aix4.[012]|aix4.[012].*)
- # We only want to do this on AIX 4.2 and lower, the check
- # below for broken collect2 doesn't work under 4.3+
- collect2name=`${CC} -print-prog-name=collect2`
- if test -f "$collect2name" && \
- strings "$collect2name" | grep resolve_lib_name >/dev/null
- then
- # We have reworked collect2
- :
- else
- # We have old collect2
- hardcode_direct_F77=unsupported
- # It fails to find uninstalled libraries when the uninstalled
- # path is not listed in the libpath. Setting hardcode_minus_L
- # to unsupported forces relinking
- hardcode_minus_L_F77=yes
- hardcode_libdir_flag_spec_F77='-L$libdir'
- hardcode_libdir_separator_F77=
- fi
- ;;
- esac
- shared_flag='-shared'
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag="$shared_flag "'${wl}-G'
- fi
- else
- # not using gcc
- if test "$host_cpu" = ia64; then
- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
- # chokes on -Wl,-G. The following line is correct:
- shared_flag='-G'
- else
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag='${wl}-G'
- else
- shared_flag='${wl}-bM:SRE'
- fi
- fi
- fi
-
- # It seems that -bexpall does not export symbols beginning with
- # underscore (_), so it is better to generate a list of symbols to export.
- always_export_symbols_F77=yes
- if test "$aix_use_runtimelinking" = yes; then
- # Warning - without using the other runtime loading flags (-brtl),
- # -berok will link without error, but may produce a broken library.
- allow_undefined_flag_F77='-berok'
- # Determine the default libpath from the value encoded in an empty executable.
- cat >conftest.$ac_ext <<_ACEOF
- program main
-
- end
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_f77_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext &&
- $as_test_x conftest$ac_exeext; then
-
-lt_aix_libpath_sed='
- /Import File Strings/,/^$/ {
- /^0/ {
- s/^0 *\(.*\)$/\1/
- p
- }
- }'
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then
- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-fi
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-
- hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath"
- archive_expsym_cmds_F77="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
- else
- if test "$host_cpu" = ia64; then
- hardcode_libdir_flag_spec_F77='${wl}-R $libdir:/usr/lib:/lib'
- allow_undefined_flag_F77="-z nodefs"
- archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
- else
- # Determine the default libpath from the value encoded in an empty executable.
- cat >conftest.$ac_ext <<_ACEOF
- program main
-
- end
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_f77_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext &&
- $as_test_x conftest$ac_exeext; then
-
-lt_aix_libpath_sed='
- /Import File Strings/,/^$/ {
- /^0/ {
- s/^0 *\(.*\)$/\1/
- p
- }
- }'
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then
- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-fi
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-
- hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath"
- # Warning - without using the other run time loading flags,
- # -berok will link without error, but may produce a broken library.
- no_undefined_flag_F77=' ${wl}-bernotok'
- allow_undefined_flag_F77=' ${wl}-berok'
- # Exported symbols can be pulled into shared objects from archives
- whole_archive_flag_spec_F77='$convenience'
- archive_cmds_need_lc_F77=yes
- # This is similar to how AIX traditionally builds its shared libraries.
- archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
- fi
- fi
- ;;
-
- amigaos*)
- archive_cmds_F77='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
- hardcode_libdir_flag_spec_F77='-L$libdir'
- hardcode_minus_L_F77=yes
- # see comment about different semantics on the GNU ld section
- ld_shlibs_F77=no
- ;;
-
- bsdi[45]*)
- export_dynamic_flag_spec_F77=-rdynamic
- ;;
-
- cygwin* | mingw* | pw32*)
- # When not using gcc, we currently assume that we are using
- # Microsoft Visual C++.
- # hardcode_libdir_flag_spec is actually meaningless, as there is
- # no search path for DLLs.
- hardcode_libdir_flag_spec_F77=' '
- allow_undefined_flag_F77=unsupported
- # Tell ltmain to make .lib files, not .a files.
- libext=lib
- # Tell ltmain to make .dll files, not .so files.
- shrext_cmds=".dll"
- # FIXME: Setting linknames here is a bad hack.
- archive_cmds_F77='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
- # The linker will automatically build a .lib file if we build a DLL.
- old_archive_From_new_cmds_F77='true'
- # FIXME: Should let the user specify the lib program.
- old_archive_cmds_F77='lib -OUT:$oldlib$oldobjs$old_deplibs'
- fix_srcfile_path_F77='`cygpath -w "$srcfile"`'
- enable_shared_with_static_runtimes_F77=yes
- ;;
-
- darwin* | rhapsody*)
- case $host_os in
- rhapsody* | darwin1.[012])
- allow_undefined_flag_F77='${wl}-undefined ${wl}suppress'
- ;;
- *) # Darwin 1.3 on
- if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
- allow_undefined_flag_F77='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
- else
- case ${MACOSX_DEPLOYMENT_TARGET} in
- 10.[012])
- allow_undefined_flag_F77='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
- ;;
- 10.*)
- allow_undefined_flag_F77='${wl}-undefined ${wl}dynamic_lookup'
- ;;
- esac
- fi
- ;;
- esac
- archive_cmds_need_lc_F77=no
- hardcode_direct_F77=no
- hardcode_automatic_F77=yes
- hardcode_shlibpath_var_F77=unsupported
- whole_archive_flag_spec_F77=''
- link_all_deplibs_F77=yes
- if test "$GCC" = yes ; then
- output_verbose_link_cmd='echo'
- archive_cmds_F77='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
- module_cmds_F77='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
- archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- module_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- else
- case $cc_basename in
- xlc*)
- output_verbose_link_cmd='echo'
- archive_cmds_F77='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
- module_cmds_F77='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
- archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- module_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- ;;
- *)
- ld_shlibs_F77=no
- ;;
- esac
- fi
- ;;
-
- dgux*)
- archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_libdir_flag_spec_F77='-L$libdir'
- hardcode_shlibpath_var_F77=no
- ;;
-
- freebsd1*)
- ld_shlibs_F77=no
- ;;
-
- # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
- # support. Future versions do this automatically, but an explicit c++rt0.o
- # does not break anything, and helps significantly (at the cost of a little
- # extra space).
- freebsd2.2*)
- archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
- hardcode_libdir_flag_spec_F77='-R$libdir'
- hardcode_direct_F77=yes
- hardcode_shlibpath_var_F77=no
- ;;
-
- # Unfortunately, older versions of FreeBSD 2 do not have this feature.
- freebsd2*)
- archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- hardcode_direct_F77=yes
- hardcode_minus_L_F77=yes
- hardcode_shlibpath_var_F77=no
- ;;
-
- # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
- freebsd* | dragonfly*)
- archive_cmds_F77='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
- hardcode_libdir_flag_spec_F77='-R$libdir'
- hardcode_direct_F77=yes
- hardcode_shlibpath_var_F77=no
- ;;
-
- hpux9*)
- if test "$GCC" = yes; then
- archive_cmds_F77='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
- else
- archive_cmds_F77='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
- fi
- hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir'
- hardcode_libdir_separator_F77=:
- hardcode_direct_F77=yes
-
- # hardcode_minus_L: Not really in the search PATH,
- # but as the default location of the library.
- hardcode_minus_L_F77=yes
- export_dynamic_flag_spec_F77='${wl}-E'
- ;;
-
- hpux10*)
- if test "$GCC" = yes -a "$with_gnu_ld" = no; then
- archive_cmds_F77='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
- else
- archive_cmds_F77='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
- fi
- if test "$with_gnu_ld" = no; then
- hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir'
- hardcode_libdir_separator_F77=:
-
- hardcode_direct_F77=yes
- export_dynamic_flag_spec_F77='${wl}-E'
-
- # hardcode_minus_L: Not really in the search PATH,
- # but as the default location of the library.
- hardcode_minus_L_F77=yes
- fi
- ;;
-
- hpux11*)
- if test "$GCC" = yes -a "$with_gnu_ld" = no; then
- case $host_cpu in
- hppa*64*)
- archive_cmds_F77='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- ia64*)
- archive_cmds_F77='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- *)
- archive_cmds_F77='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- esac
- else
- case $host_cpu in
- hppa*64*)
- archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- ia64*)
- archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- *)
- archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- esac
- fi
- if test "$with_gnu_ld" = no; then
- hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir'
- hardcode_libdir_separator_F77=:
-
- case $host_cpu in
- hppa*64*|ia64*)
- hardcode_libdir_flag_spec_ld_F77='+b $libdir'
- hardcode_direct_F77=no
- hardcode_shlibpath_var_F77=no
- ;;
- *)
- hardcode_direct_F77=yes
- export_dynamic_flag_spec_F77='${wl}-E'
-
- # hardcode_minus_L: Not really in the search PATH,
- # but as the default location of the library.
- hardcode_minus_L_F77=yes
- ;;
- esac
- fi
- ;;
-
- irix5* | irix6* | nonstopux*)
- if test "$GCC" = yes; then
- archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- else
- archive_cmds_F77='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
- hardcode_libdir_flag_spec_ld_F77='-rpath $libdir'
- fi
- hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator_F77=:
- link_all_deplibs_F77=yes
- ;;
-
- netbsd*)
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
- else
- archive_cmds_F77='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
- fi
- hardcode_libdir_flag_spec_F77='-R$libdir'
- hardcode_direct_F77=yes
- hardcode_shlibpath_var_F77=no
- ;;
-
- newsos6)
- archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_direct_F77=yes
- hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator_F77=:
- hardcode_shlibpath_var_F77=no
- ;;
-
- openbsd*)
- if test -f /usr/libexec/ld.so; then
- hardcode_direct_F77=yes
- hardcode_shlibpath_var_F77=no
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
- hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
- export_dynamic_flag_spec_F77='${wl}-E'
- else
- case $host_os in
- openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
- archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- hardcode_libdir_flag_spec_F77='-R$libdir'
- ;;
- *)
- archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
- ;;
- esac
- fi
- else
- ld_shlibs_F77=no
- fi
- ;;
-
- os2*)
- hardcode_libdir_flag_spec_F77='-L$libdir'
- hardcode_minus_L_F77=yes
- allow_undefined_flag_F77=unsupported
- archive_cmds_F77='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
- old_archive_From_new_cmds_F77='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
- ;;
-
- osf3*)
- if test "$GCC" = yes; then
- allow_undefined_flag_F77=' ${wl}-expect_unresolved ${wl}\*'
- archive_cmds_F77='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- else
- allow_undefined_flag_F77=' -expect_unresolved \*'
- archive_cmds_F77='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
- fi
- hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator_F77=:
- ;;
-
- osf4* | osf5*) # as osf3* with the addition of -msym flag
- if test "$GCC" = yes; then
- allow_undefined_flag_F77=' ${wl}-expect_unresolved ${wl}\*'
- archive_cmds_F77='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
- else
- allow_undefined_flag_F77=' -expect_unresolved \*'
- archive_cmds_F77='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
- archive_expsym_cmds_F77='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
- $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
-
- # Both c and cxx compiler support -rpath directly
- hardcode_libdir_flag_spec_F77='-rpath $libdir'
- fi
- hardcode_libdir_separator_F77=:
- ;;
-
- solaris*)
- no_undefined_flag_F77=' -z text'
- if test "$GCC" = yes; then
- wlarc='${wl}'
- archive_cmds_F77='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
- $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
- else
- wlarc=''
- archive_cmds_F77='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
- archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
- fi
- hardcode_libdir_flag_spec_F77='-R$libdir'
- hardcode_shlibpath_var_F77=no
- case $host_os in
- solaris2.[0-5] | solaris2.[0-5].*) ;;
- *)
- # The compiler driver will combine and reorder linker options,
- # but understands `-z linker_flag'. GCC discards it without `$wl',
- # but is careful enough not to reorder.
- # Supported since Solaris 2.6 (maybe 2.5.1?)
- if test "$GCC" = yes; then
- whole_archive_flag_spec_F77='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
- else
- whole_archive_flag_spec_F77='-z allextract$convenience -z defaultextract'
- fi
- ;;
- esac
- link_all_deplibs_F77=yes
- ;;
-
- sunos4*)
- if test "x$host_vendor" = xsequent; then
- # Use $CC to link under sequent, because it throws in some extra .o
- # files that make .init and .fini sections work.
- archive_cmds_F77='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
- else
- archive_cmds_F77='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
- fi
- hardcode_libdir_flag_spec_F77='-L$libdir'
- hardcode_direct_F77=yes
- hardcode_minus_L_F77=yes
- hardcode_shlibpath_var_F77=no
- ;;
-
- sysv4)
- case $host_vendor in
- sni)
- archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_direct_F77=yes # is this really true???
- ;;
- siemens)
- ## LD is ld it makes a PLAMLIB
- ## CC just makes a GrossModule.
- archive_cmds_F77='$LD -G -o $lib $libobjs $deplibs $linker_flags'
- reload_cmds_F77='$CC -r -o $output$reload_objs'
- hardcode_direct_F77=no
- ;;
- motorola)
- archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_direct_F77=no #Motorola manual says yes, but my tests say they lie
- ;;
- esac
- runpath_var='LD_RUN_PATH'
- hardcode_shlibpath_var_F77=no
- ;;
-
- sysv4.3*)
- archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_shlibpath_var_F77=no
- export_dynamic_flag_spec_F77='-Bexport'
- ;;
-
- sysv4*MP*)
- if test -d /usr/nec; then
- archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_shlibpath_var_F77=no
- runpath_var=LD_RUN_PATH
- hardcode_runpath_var=yes
- ld_shlibs_F77=yes
- fi
- ;;
-
- sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
- no_undefined_flag_F77='${wl}-z,text'
- archive_cmds_need_lc_F77=no
- hardcode_shlibpath_var_F77=no
- runpath_var='LD_RUN_PATH'
-
- if test "$GCC" = yes; then
- archive_cmds_F77='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds_F77='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- else
- archive_cmds_F77='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds_F77='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- fi
- ;;
-
- sysv5* | sco3.2v5* | sco5v6*)
- # Note: We can NOT use -z defs as we might desire, because we do not
- # link with -lc, and that would cause any symbols used from libc to
- # always be unresolved, which means just about no library would
- # ever link correctly. If we're not using GNU ld we use -z text
- # though, which does catch some bad symbols but isn't as heavy-handed
- # as -z defs.
- no_undefined_flag_F77='${wl}-z,text'
- allow_undefined_flag_F77='${wl}-z,nodefs'
- archive_cmds_need_lc_F77=no
- hardcode_shlibpath_var_F77=no
- hardcode_libdir_flag_spec_F77='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
- hardcode_libdir_separator_F77=':'
- link_all_deplibs_F77=yes
- export_dynamic_flag_spec_F77='${wl}-Bexport'
- runpath_var='LD_RUN_PATH'
-
- if test "$GCC" = yes; then
- archive_cmds_F77='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds_F77='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- else
- archive_cmds_F77='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds_F77='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- fi
- ;;
-
- uts4*)
- archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_libdir_flag_spec_F77='-L$libdir'
- hardcode_shlibpath_var_F77=no
- ;;
-
- *)
- ld_shlibs_F77=no
- ;;
- esac
- fi
-
-{ echo "$as_me:$LINENO: result: $ld_shlibs_F77" >&5
-echo "${ECHO_T}$ld_shlibs_F77" >&6; }
-test "$ld_shlibs_F77" = no && can_build_shared=no
-
-#
-# Do we need to explicitly link libc?
-#
-case "x$archive_cmds_need_lc_F77" in
-x|xyes)
- # Assume -lc should be added
- archive_cmds_need_lc_F77=yes
-
- if test "$enable_shared" = yes && test "$GCC" = yes; then
- case $archive_cmds_F77 in
- *'~'*)
- # FIXME: we may have to deal with multi-command sequences.
- ;;
- '$CC '*)
- # Test whether the compiler implicitly links with -lc since on some
- # systems, -lgcc has to come before -lc. If gcc already passes -lc
- # to ld, don't add -lc before -lgcc.
- { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
-echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; }
- $rm conftest*
- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-
- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } 2>conftest.err; then
- soname=conftest
- lib=conftest
- libobjs=conftest.$ac_objext
- deplibs=
- wl=$lt_prog_compiler_wl_F77
- pic_flag=$lt_prog_compiler_pic_F77
- compiler_flags=-v
- linker_flags=-v
- verstring=
- output_objdir=.
- libname=conftest
- lt_save_allow_undefined_flag=$allow_undefined_flag_F77
- allow_undefined_flag_F77=
- if { (eval echo "$as_me:$LINENO: \"$archive_cmds_F77 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
- (eval $archive_cmds_F77 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
- then
- archive_cmds_need_lc_F77=no
- else
- archive_cmds_need_lc_F77=yes
- fi
- allow_undefined_flag_F77=$lt_save_allow_undefined_flag
- else
- cat conftest.err 1>&5
- fi
- $rm conftest*
- { echo "$as_me:$LINENO: result: $archive_cmds_need_lc_F77" >&5
-echo "${ECHO_T}$archive_cmds_need_lc_F77" >&6; }
- ;;
- esac
- fi
- ;;
-esac
-
-{ echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
-echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; }
-library_names_spec=
-libname_spec='lib$name'
-soname_spec=
-shrext_cmds=".so"
-postinstall_cmds=
-postuninstall_cmds=
-finish_cmds=
-finish_eval=
-shlibpath_var=
-shlibpath_overrides_runpath=unknown
-version_type=none
-dynamic_linker="$host_os ld.so"
-sys_lib_dlsearch_path_spec="/lib /usr/lib"
-
-need_lib_prefix=unknown
-hardcode_into_libs=no
-
-# when you set need_version to no, make sure it does not cause -set_version
-# flags to be left without arguments
-need_version=unknown
-
-case $host_os in
-aix3*)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
- shlibpath_var=LIBPATH
-
- # AIX 3 has no versioning support, so we append a major version to the name.
- soname_spec='${libname}${release}${shared_ext}$major'
- ;;
-
-aix4* | aix5*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- hardcode_into_libs=yes
- if test "$host_cpu" = ia64; then
- # AIX 5 supports IA64
- library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
- shlibpath_var=LD_LIBRARY_PATH
- else
- # With GCC up to 2.95.x, collect2 would create an import file
- # for dependence libraries. The import file would start with
- # the line `#! .'. This would cause the generated library to
- # depend on `.', always an invalid library. This was fixed in
- # development snapshots of GCC prior to 3.0.
- case $host_os in
- aix4 | aix4.[01] | aix4.[01].*)
- if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
- echo ' yes '
- echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
- :
- else
- can_build_shared=no
- fi
- ;;
- esac
- # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
- # soname into executable. Probably we can add versioning support to
- # collect2, so additional links can be useful in future.
- if test "$aix_use_runtimelinking" = yes; then
- # If using run time linking (on AIX 4.2 or later) use lib<name>.so
- # instead of lib<name>.a to let people know that these are not
- # typical AIX shared libraries.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- else
- # We preserve .a as extension for shared libraries through AIX4.2
- # and later when we are not doing run time linking.
- library_names_spec='${libname}${release}.a $libname.a'
- soname_spec='${libname}${release}${shared_ext}$major'
- fi
- shlibpath_var=LIBPATH
- fi
- ;;
-
-amigaos*)
- library_names_spec='$libname.ixlibrary $libname.a'
- # Create ${libname}_ixlibrary.a entries in /sys/libs.
- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
- ;;
-
-beos*)
- library_names_spec='${libname}${shared_ext}'
- dynamic_linker="$host_os ld.so"
- shlibpath_var=LIBRARY_PATH
- ;;
-
-bsdi[45]*)
- version_type=linux
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
- sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
- # the default ld.so.conf also contains /usr/contrib/lib and
- # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
- # libtool to hard-code these into programs
- ;;
-
-cygwin* | mingw* | pw32*)
- version_type=windows
- shrext_cmds=".dll"
- need_version=no
- need_lib_prefix=no
-
- case $GCC,$host_os in
- yes,cygwin* | yes,mingw* | yes,pw32*)
- library_names_spec='$libname.dll.a'
- # DLL is installed to $(libdir)/../bin by postinstall_cmds
- postinstall_cmds='base_file=`basename \${file}`~
- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
- dldir=$destdir/`dirname \$dlpath`~
- test -d \$dldir || mkdir -p \$dldir~
- $install_prog $dir/$dlname \$dldir/$dlname~
- chmod a+x \$dldir/$dlname'
- postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
- dlpath=$dir/\$dldll~
- $rm \$dlpath'
- shlibpath_overrides_runpath=yes
-
- case $host_os in
- cygwin*)
- # Cygwin DLLs use 'cyg' prefix rather than 'lib'
- soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
- sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
- ;;
- mingw*)
- # MinGW DLLs use traditional 'lib' prefix
- soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
- if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
- # It is most probably a Windows format PATH printed by
- # mingw gcc, but we are running on Cygwin. Gcc prints its search
- # path with ; separators, and with drive letters. We can handle the
- # drive letters (cygwin fileutils understands them), so leave them,
- # especially as we might pass files found there to a mingw objdump,
- # which wouldn't understand a cygwinified path. Ahh.
- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
- else
- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
- fi
- ;;
- pw32*)
- # pw32 DLLs use 'pw' prefix rather than 'lib'
- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
- ;;
- esac
- ;;
-
- *)
- library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
- ;;
- esac
- dynamic_linker='Win32 ld.exe'
- # FIXME: first we should search . and the directory the executable is in
- shlibpath_var=PATH
- ;;
-
-darwin* | rhapsody*)
- dynamic_linker="$host_os dyld"
- version_type=darwin
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
- soname_spec='${libname}${release}${major}$shared_ext'
- shlibpath_overrides_runpath=yes
- shlibpath_var=DYLD_LIBRARY_PATH
- shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
-
- sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
- ;;
-
-dgux*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- ;;
-
-freebsd1*)
- dynamic_linker=no
- ;;
-
-freebsd* | dragonfly*)
- # DragonFly does not have aout. When/if they implement a new
- # versioning mechanism, adjust this.
- if test -x /usr/bin/objformat; then
- objformat=`/usr/bin/objformat`
- else
- case $host_os in
- freebsd[123]*) objformat=aout ;;
- *) objformat=elf ;;
- esac
- fi
- version_type=freebsd-$objformat
- case $version_type in
- freebsd-elf*)
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
- need_version=no
- need_lib_prefix=no
- ;;
- freebsd-*)
- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
- need_version=yes
- ;;
- esac
- shlibpath_var=LD_LIBRARY_PATH
- case $host_os in
- freebsd2*)
- shlibpath_overrides_runpath=yes
- ;;
- freebsd3.[01]* | freebsdelf3.[01]*)
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- ;;
- freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
- freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- ;;
- *) # from 4.6 on, and DragonFly
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- ;;
- esac
- ;;
-
-gnu*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- hardcode_into_libs=yes
- ;;
-
-hpux9* | hpux10* | hpux11*)
- # Give a soname corresponding to the major version so that dld.sl refuses to
- # link against other versions.
- version_type=sunos
- need_lib_prefix=no
- need_version=no
- case $host_cpu in
- ia64*)
- shrext_cmds='.so'
- hardcode_into_libs=yes
- dynamic_linker="$host_os dld.so"
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- if test "X$HPUX_IA64_MODE" = X32; then
- sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
- else
- sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
- fi
- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
- ;;
- hppa*64*)
- shrext_cmds='.sl'
- hardcode_into_libs=yes
- dynamic_linker="$host_os dld.sl"
- shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
- ;;
- *)
- shrext_cmds='.sl'
- dynamic_linker="$host_os dld.sl"
- shlibpath_var=SHLIB_PATH
- shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- ;;
- esac
- # HP-UX runs *really* slowly unless shared libraries are mode 555.
- postinstall_cmds='chmod 555 $lib'
- ;;
-
-interix[3-9]*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- ;;
-
-irix5* | irix6* | nonstopux*)
- case $host_os in
- nonstopux*) version_type=nonstopux ;;
- *)
- if test "$lt_cv_prog_gnu_ld" = yes; then
- version_type=linux
- else
- version_type=irix
- fi ;;
- esac
- need_lib_prefix=no
- need_version=no
- soname_spec='${libname}${release}${shared_ext}$major'
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
- case $host_os in
- irix5* | nonstopux*)
- libsuff= shlibsuff=
- ;;
- *)
- case $LD in # libtool.m4 will add one of these switches to LD
- *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
- libsuff= shlibsuff= libmagic=32-bit;;
- *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
- libsuff=32 shlibsuff=N32 libmagic=N32;;
- *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
- libsuff=64 shlibsuff=64 libmagic=64-bit;;
- *) libsuff= shlibsuff= libmagic=never-match;;
- esac
- ;;
- esac
- shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
- shlibpath_overrides_runpath=no
- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
- hardcode_into_libs=yes
- ;;
-
-# No shared lib support for Linux oldld, aout, or coff.
-linux*oldld* | linux*aout* | linux*coff*)
- dynamic_linker=no
- ;;
-
-# This must be Linux ELF.
-linux* | k*bsd*-gnu)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- # This implies no fast_install, which is unacceptable.
- # Some rework will be needed to allow for fast_install
- # before this can be enabled.
- hardcode_into_libs=yes
-
- # Append ld.so.conf contents to the search path
- if test -f /etc/ld.so.conf; then
- lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
- sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
- fi
-
- # We used to test for /lib/ld.so.1 and disable shared libraries on
- # powerpc, because MkLinux only supported shared libraries with the
- # GNU dynamic linker. Since this was broken with cross compilers,
- # most powerpc-linux boxes support dynamic linking these days and
- # people can always --disable-shared, the test was removed, and we
- # assume the GNU/Linux dynamic linker is in use.
- dynamic_linker='GNU/Linux ld.so'
- ;;
-
-netbsd*)
- version_type=sunos
- need_lib_prefix=no
- need_version=no
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
- dynamic_linker='NetBSD (a.out) ld.so'
- else
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- dynamic_linker='NetBSD ld.elf_so'
- fi
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- ;;
-
-newsos6)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- ;;
-
-nto-qnx*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- ;;
-
-openbsd*)
- version_type=sunos
- sys_lib_dlsearch_path_spec="/usr/lib"
- need_lib_prefix=no
- # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
- case $host_os in
- openbsd3.3 | openbsd3.3.*) need_version=yes ;;
- *) need_version=no ;;
- esac
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- case $host_os in
- openbsd2.[89] | openbsd2.[89].*)
- shlibpath_overrides_runpath=no
- ;;
- *)
- shlibpath_overrides_runpath=yes
- ;;
- esac
- else
- shlibpath_overrides_runpath=yes
- fi
- ;;
-
-os2*)
- libname_spec='$name'
- shrext_cmds=".dll"
- need_lib_prefix=no
- library_names_spec='$libname${shared_ext} $libname.a'
- dynamic_linker='OS/2 ld.exe'
- shlibpath_var=LIBPATH
- ;;
-
-osf3* | osf4* | osf5*)
- version_type=osf
- need_lib_prefix=no
- need_version=no
- soname_spec='${libname}${release}${shared_ext}$major'
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- shlibpath_var=LD_LIBRARY_PATH
- sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
- sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
- ;;
-
-rdos*)
- dynamic_linker=no
- ;;
-
-solaris*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- # ldd complains unless libraries are executable
- postinstall_cmds='chmod +x $lib'
- ;;
-
-sunos4*)
- version_type=sunos
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
- finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- if test "$with_gnu_ld" = yes; then
- need_lib_prefix=no
- fi
- need_version=yes
- ;;
-
-sysv4 | sysv4.3*)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- case $host_vendor in
- sni)
- shlibpath_overrides_runpath=no
- need_lib_prefix=no
- export_dynamic_flag_spec='${wl}-Blargedynsym'
- runpath_var=LD_RUN_PATH
- ;;
- siemens)
- need_lib_prefix=no
- ;;
- motorola)
- need_lib_prefix=no
- need_version=no
- shlibpath_overrides_runpath=no
- sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
- ;;
- esac
- ;;
-
-sysv4*MP*)
- if test -d /usr/nec ;then
- version_type=linux
- library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
- soname_spec='$libname${shared_ext}.$major'
- shlibpath_var=LD_LIBRARY_PATH
- fi
- ;;
-
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
- version_type=freebsd-elf
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- hardcode_into_libs=yes
- if test "$with_gnu_ld" = yes; then
- sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
- shlibpath_overrides_runpath=no
- else
- sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
- shlibpath_overrides_runpath=yes
- case $host_os in
- sco3.2v5*)
- sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
- ;;
- esac
- fi
- sys_lib_dlsearch_path_spec='/usr/lib'
- ;;
-
-uts4*)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- ;;
-
-*)
- dynamic_linker=no
- ;;
-esac
-{ echo "$as_me:$LINENO: result: $dynamic_linker" >&5
-echo "${ECHO_T}$dynamic_linker" >&6; }
-test "$dynamic_linker" = no && can_build_shared=no
-
-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
- variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-fi
-
-{ echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
-echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; }
-hardcode_action_F77=
-if test -n "$hardcode_libdir_flag_spec_F77" || \
- test -n "$runpath_var_F77" || \
- test "X$hardcode_automatic_F77" = "Xyes" ; then
-
- # We can hardcode non-existant directories.
- if test "$hardcode_direct_F77" != no &&
- # If the only mechanism to avoid hardcoding is shlibpath_var, we
- # have to relink, otherwise we might link with an installed library
- # when we should be linking with a yet-to-be-installed one
- ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, F77)" != no &&
- test "$hardcode_minus_L_F77" != no; then
- # Linking always hardcodes the temporary library directory.
- hardcode_action_F77=relink
- else
- # We can link without hardcoding, and we can hardcode nonexisting dirs.
- hardcode_action_F77=immediate
- fi
-else
- # We cannot hardcode anything, or else we can only hardcode existing
- # directories.
- hardcode_action_F77=unsupported
-fi
-{ echo "$as_me:$LINENO: result: $hardcode_action_F77" >&5
-echo "${ECHO_T}$hardcode_action_F77" >&6; }
-
-if test "$hardcode_action_F77" = relink; then
- # Fast installation is not supported
- enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
- test "$enable_shared" = no; then
- # Fast installation is not necessary
- enable_fast_install=needless
-fi
-
-
-# The else clause should only fire when bootstrapping the
-# libtool distribution, otherwise you forgot to ship ltmain.sh
-# with your package, and you will get complaints that there are
-# no rules to generate ltmain.sh.
-if test -f "$ltmain"; then
- # See if we are running on zsh, and set the options which allow our commands through
- # without removal of \ escapes.
- if test -n "${ZSH_VERSION+set}" ; then
- setopt NO_GLOB_SUBST
- fi
- # Now quote all the things that may contain metacharacters while being
- # careful not to overquote the AC_SUBSTed values. We take copies of the
- # variables and quote the copies for generation of the libtool script.
- for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
- SED SHELL STRIP \
- libname_spec library_names_spec soname_spec extract_expsyms_cmds \
- old_striplib striplib file_magic_cmd finish_cmds finish_eval \
- deplibs_check_method reload_flag reload_cmds need_locks \
- lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
- lt_cv_sys_global_symbol_to_c_name_address \
- sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
- old_postinstall_cmds old_postuninstall_cmds \
- compiler_F77 \
- CC_F77 \
- LD_F77 \
- lt_prog_compiler_wl_F77 \
- lt_prog_compiler_pic_F77 \
- lt_prog_compiler_static_F77 \
- lt_prog_compiler_no_builtin_flag_F77 \
- export_dynamic_flag_spec_F77 \
- thread_safe_flag_spec_F77 \
- whole_archive_flag_spec_F77 \
- enable_shared_with_static_runtimes_F77 \
- old_archive_cmds_F77 \
- old_archive_from_new_cmds_F77 \
- predep_objects_F77 \
- postdep_objects_F77 \
- predeps_F77 \
- postdeps_F77 \
- compiler_lib_search_path_F77 \
- archive_cmds_F77 \
- archive_expsym_cmds_F77 \
- postinstall_cmds_F77 \
- postuninstall_cmds_F77 \
- old_archive_from_expsyms_cmds_F77 \
- allow_undefined_flag_F77 \
- no_undefined_flag_F77 \
- export_symbols_cmds_F77 \
- hardcode_libdir_flag_spec_F77 \
- hardcode_libdir_flag_spec_ld_F77 \
- hardcode_libdir_separator_F77 \
- hardcode_automatic_F77 \
- module_cmds_F77 \
- module_expsym_cmds_F77 \
- lt_cv_prog_compiler_c_o_F77 \
- fix_srcfile_path_F77 \
- exclude_expsyms_F77 \
- include_expsyms_F77; do
-
- case $var in
- old_archive_cmds_F77 | \
- old_archive_from_new_cmds_F77 | \
- archive_cmds_F77 | \
- archive_expsym_cmds_F77 | \
- module_cmds_F77 | \
- module_expsym_cmds_F77 | \
- old_archive_from_expsyms_cmds_F77 | \
- export_symbols_cmds_F77 | \
- extract_expsyms_cmds | reload_cmds | finish_cmds | \
- postinstall_cmds | postuninstall_cmds | \
- old_postinstall_cmds | old_postuninstall_cmds | \
- sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
- # Double-quote double-evaled strings.
- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
- ;;
- *)
- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
- ;;
- esac
- done
-
- case $lt_echo in
- *'\$0 --fallback-echo"')
- lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
- ;;
- esac
-
-cfgfile="$ofile"
-
- cat <<__EOF__ >> "$cfgfile"
-# ### BEGIN LIBTOOL TAG CONFIG: $tagname
-
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-
-# Shell to use when invoking shell scripts.
-SHELL=$lt_SHELL
-
-# Whether or not to build shared libraries.
-build_libtool_libs=$enable_shared
-
-# Whether or not to build static libraries.
-build_old_libs=$enable_static
-
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=$archive_cmds_need_lc_F77
-
-# Whether or not to disallow shared libs when runtime libs are static
-allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_F77
-
-# Whether or not to optimize for fast installation.
-fast_install=$enable_fast_install
-
-# The host system.
-host_alias=$host_alias
-host=$host
-host_os=$host_os
-
-# The build system.
-build_alias=$build_alias
-build=$build
-build_os=$build_os
-
-# An echo program that does not interpret backslashes.
-echo=$lt_echo
-
-# The archiver.
-AR=$lt_AR
-AR_FLAGS=$lt_AR_FLAGS
-
-# A C compiler.
-LTCC=$lt_LTCC
-
-# LTCC compiler flags.
-LTCFLAGS=$lt_LTCFLAGS
-
-# A language-specific compiler.
-CC=$lt_compiler_F77
-
-# Is the compiler the GNU C compiler?
-with_gcc=$GCC_F77
-
-# An ERE matcher.
-EGREP=$lt_EGREP
-
-# The linker used to build libraries.
-LD=$lt_LD_F77
-
-# Whether we need hard or soft links.
-LN_S=$lt_LN_S
-
-# A BSD-compatible nm program.
-NM=$lt_NM
-
-# A symbol stripping program
-STRIP=$lt_STRIP
-
-# Used to examine libraries when file_magic_cmd begins "file"
-MAGIC_CMD=$MAGIC_CMD
-
-# Used on cygwin: DLL creation program.
-DLLTOOL="$DLLTOOL"
-
-# Used on cygwin: object dumper.
-OBJDUMP="$OBJDUMP"
-
-# Used on cygwin: assembler.
-AS="$AS"
-
-# The name of the directory that contains temporary libtool files.
-objdir=$objdir
-
-# How to create reloadable object files.
-reload_flag=$lt_reload_flag
-reload_cmds=$lt_reload_cmds
-
-# How to pass a linker flag through the compiler.
-wl=$lt_lt_prog_compiler_wl_F77
-
-# Object file suffix (normally "o").
-objext="$ac_objext"
-
-# Old archive suffix (normally "a").
-libext="$libext"
-
-# Shared library suffix (normally ".so").
-shrext_cmds='$shrext_cmds'
-
-# Executable file suffix (normally "").
-exeext="$exeext"
-
-# Additional compiler flags for building library objects.
-pic_flag=$lt_lt_prog_compiler_pic_F77
-pic_mode=$pic_mode
-
-# What is the maximum length of a command?
-max_cmd_len=$lt_cv_sys_max_cmd_len
-
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o=$lt_lt_cv_prog_compiler_c_o_F77
-
-# Must we lock files when doing compilation?
-need_locks=$lt_need_locks
-
-# Do we need the lib prefix for modules?
-need_lib_prefix=$need_lib_prefix
-
-# Do we need a version for libraries?
-need_version=$need_version
-
-# Whether dlopen is supported.
-dlopen_support=$enable_dlopen
-
-# Whether dlopen of programs is supported.
-dlopen_self=$enable_dlopen_self
-
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=$enable_dlopen_self_static
-
-# Compiler flag to prevent dynamic linking.
-link_static_flag=$lt_lt_prog_compiler_static_F77
-
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_F77
-
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_F77
-
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec=$lt_whole_archive_flag_spec_F77
-
-# Compiler flag to generate thread-safe objects.
-thread_safe_flag_spec=$lt_thread_safe_flag_spec_F77
-
-# Library versioning type.
-version_type=$version_type
-
-# Format of library name prefix.
-libname_spec=$lt_libname_spec
-
-# List of archive names. First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME.
-library_names_spec=$lt_library_names_spec
-
-# The coded name of the library, if different from the real name.
-soname_spec=$lt_soname_spec
-
-# Commands used to build and install an old-style archive.
-RANLIB=$lt_RANLIB
-old_archive_cmds=$lt_old_archive_cmds_F77
-old_postinstall_cmds=$lt_old_postinstall_cmds
-old_postuninstall_cmds=$lt_old_postuninstall_cmds
-
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_F77
-
-# Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_F77
-
-# Commands used to build and install a shared archive.
-archive_cmds=$lt_archive_cmds_F77
-archive_expsym_cmds=$lt_archive_expsym_cmds_F77
-postinstall_cmds=$lt_postinstall_cmds
-postuninstall_cmds=$lt_postuninstall_cmds
-
-# Commands used to build a loadable module (assumed same as above if empty)
-module_cmds=$lt_module_cmds_F77
-module_expsym_cmds=$lt_module_expsym_cmds_F77
-
-# Commands to strip libraries.
-old_striplib=$lt_old_striplib
-striplib=$lt_striplib
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predep_objects=$lt_predep_objects_F77
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdep_objects=$lt_postdep_objects_F77
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predeps=$lt_predeps_F77
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdeps=$lt_postdeps_F77
-
-# The library search path used internally by the compiler when linking
-# a shared library.
-compiler_lib_search_path=$lt_compiler_lib_search_path_F77
-
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method=$lt_deplibs_check_method
-
-# Command to use when deplibs_check_method == file_magic.
-file_magic_cmd=$lt_file_magic_cmd
-
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=$lt_allow_undefined_flag_F77
-
-# Flag that forces no undefined symbols.
-no_undefined_flag=$lt_no_undefined_flag_F77
-
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds=$lt_finish_cmds
-
-# Same as above, but a single script fragment to be evaled but not shown.
-finish_eval=$lt_finish_eval
-
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-
-# Transform the output of nm in a proper C declaration
-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-
-# Transform the output of nm in a C name address pair
-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-
-# This is the shared library runtime path variable.
-runpath_var=$runpath_var
-
-# This is the shared library path variable.
-shlibpath_var=$shlibpath_var
-
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-
-# How to hardcode a shared library path into an executable.
-hardcode_action=$hardcode_action_F77
-
-# Whether we should hardcode library paths into libraries.
-hardcode_into_libs=$hardcode_into_libs
-
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_F77
-
-# If ld is used when linking, flag to hardcode \$libdir into
-# a binary during linking. This must work even if \$libdir does
-# not exist.
-hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_F77
-
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator=$lt_hardcode_libdir_separator_F77
-
-# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct=$hardcode_direct_F77
-
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L=$hardcode_minus_L_F77
-
-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-# the resulting binary.
-hardcode_shlibpath_var=$hardcode_shlibpath_var_F77
-
-# Set to yes if building a shared library automatically hardcodes DIR into the library
-# and all subsequent libraries and executables linked against it.
-hardcode_automatic=$hardcode_automatic_F77
-
-# Variables whose values should be saved in libtool wrapper scripts and
-# restored at relink time.
-variables_saved_for_relink="$variables_saved_for_relink"
-
-# Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=$link_all_deplibs_F77
-
-# Compile-time system search path for libraries
-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-
-# Run-time system search path for libraries
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-
-# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path=$lt_fix_srcfile_path
-
-# Set to yes if exported symbols are required.
-always_export_symbols=$always_export_symbols_F77
-
-# The commands to list exported symbols.
-export_symbols_cmds=$lt_export_symbols_cmds_F77
-
-# The commands to extract the exported symbol list from a shared archive.
-extract_expsyms_cmds=$lt_extract_expsyms_cmds
-
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms=$lt_exclude_expsyms_F77
-
-# Symbols that must always be exported.
-include_expsyms=$lt_include_expsyms_F77
-
-# ### END LIBTOOL TAG CONFIG: $tagname
-
-__EOF__
-
-
-else
- # If there is no Makefile yet, we rely on a make rule to execute
- # `config.status --recheck' to rerun these tests and create the
- # libtool script then.
- ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
- if test -f "$ltmain_in"; then
- test -f Makefile && make "$ltmain"
- fi
-fi
-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-CC="$lt_save_CC"
-
- else
- tagname=""
- fi
- ;;
-
- GCJ)
- if test -n "$GCJ" && test "X$GCJ" != "Xno"; then
-
-
-# Source file extension for Java test sources.
-ac_ext=java
-
-# Object file extension for compiled Java test sources.
-objext=o
-objext_GCJ=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="class foo {}"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='public class conftest { public static void main(String[] argv) {}; }'
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-
-# If no C compiler was specified, use CC.
-LTCC=${LTCC-"$CC"}
-
-# If no C compiler flags were specified, use CFLAGS.
-LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-
-# Allow CC to be a program name with arguments.
-compiler=$CC
-
-
-# save warnings/boilerplate of simple test code
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_compile_test_code" >conftest.$ac_ext
-eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_compiler_boilerplate=`cat conftest.err`
-$rm conftest*
-
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_link_test_code" >conftest.$ac_ext
-eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_linker_boilerplate=`cat conftest.err`
-$rm conftest*
-
-
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-CC=${GCJ-"gcj"}
-compiler=$CC
-compiler_GCJ=$CC
-for cc_temp in $compiler""; do
- case $cc_temp in
- compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
- distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
- \-*) ;;
- *) break;;
- esac
-done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-
-
-# GCJ did not exist at the time GCC didn't implicitly link libc in.
-archive_cmds_need_lc_GCJ=no
-
-old_archive_cmds_GCJ=$old_archive_cmds
-
-
-lt_prog_compiler_no_builtin_flag_GCJ=
-
-if test "$GCC" = yes; then
- lt_prog_compiler_no_builtin_flag_GCJ=' -fno-builtin'
-
-
-{ echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
-echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6; }
-if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- lt_cv_prog_compiler_rtti_exceptions=no
- ac_outfile=conftest.$ac_objext
- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
- lt_compiler_flag="-fno-rtti -fno-exceptions"
- # Insert the option either (1) after the last *FLAGS variable, or
- # (2) before a word containing "conftest.", or (3) at the end.
- # Note that $ac_compile itself does not contain backslashes and begins
- # with a dollar sign (not a hyphen), so the echo should work correctly.
- # The option is referenced via a variable to avoid confusing sed.
- lt_compile=`echo "$ac_compile" | $SED \
- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
- -e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:15666: $lt_compile\"" >&5)
- (eval "$lt_compile" 2>conftest.err)
- ac_status=$?
- cat conftest.err >&5
- echo "$as_me:15670: \$? = $ac_status" >&5
- if (exit $ac_status) && test -s "$ac_outfile"; then
- # The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings other than the usual output.
- $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
- if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
- lt_cv_prog_compiler_rtti_exceptions=yes
- fi
- fi
- $rm conftest*
-
-fi
-{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
-echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6; }
-
-if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
- lt_prog_compiler_no_builtin_flag_GCJ="$lt_prog_compiler_no_builtin_flag_GCJ -fno-rtti -fno-exceptions"
-else
- :
-fi
-
-fi
-
-lt_prog_compiler_wl_GCJ=
-lt_prog_compiler_pic_GCJ=
-lt_prog_compiler_static_GCJ=
-
-{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
-echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
-
- if test "$GCC" = yes; then
- lt_prog_compiler_wl_GCJ='-Wl,'
- lt_prog_compiler_static_GCJ='-static'
-
- case $host_os in
- aix*)
- # All AIX code is PIC.
- if test "$host_cpu" = ia64; then
- # AIX 5 now supports IA64 processor
- lt_prog_compiler_static_GCJ='-Bstatic'
- fi
- ;;
-
- amigaos*)
- # FIXME: we need at least 68020 code to build shared libraries, but
- # adding the `-m68020' flag to GCC prevents building anything better,
- # like `-m68040'.
- lt_prog_compiler_pic_GCJ='-m68020 -resident32 -malways-restore-a4'
- ;;
-
- beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
- # PIC is the default for these OSes.
- ;;
-
- mingw* | cygwin* | pw32* | os2*)
- # This hack is so that the source file can tell whether it is being
- # built for inclusion in a dll (and should export symbols for example).
- # Although the cygwin gcc ignores -fPIC, still need this for old-style
- # (--disable-auto-import) libraries
- lt_prog_compiler_pic_GCJ='-DDLL_EXPORT'
- ;;
-
- darwin* | rhapsody*)
- # PIC is the default on this platform
- # Common symbols not allowed in MH_DYLIB files
- lt_prog_compiler_pic_GCJ='-fno-common'
- ;;
-
- interix[3-9]*)
- # Interix 3.x gcc -fpic/-fPIC options generate broken code.
- # Instead, we relocate shared libraries at runtime.
- ;;
-
- msdosdjgpp*)
- # Just because we use GCC doesn't mean we suddenly get shared libraries
- # on systems that don't support them.
- lt_prog_compiler_can_build_shared_GCJ=no
- enable_shared=no
- ;;
-
- sysv4*MP*)
- if test -d /usr/nec; then
- lt_prog_compiler_pic_GCJ=-Kconform_pic
- fi
- ;;
-
- hpux*)
- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
- # not for PA HP-UX.
- case $host_cpu in
- hppa*64*|ia64*)
- # +Z the default
- ;;
- *)
- lt_prog_compiler_pic_GCJ='-fPIC'
- ;;
- esac
- ;;
-
- *)
- lt_prog_compiler_pic_GCJ='-fPIC'
- ;;
- esac
- else
- # PORTME Check for flag to pass linker flags through the system compiler.
- case $host_os in
- aix*)
- lt_prog_compiler_wl_GCJ='-Wl,'
- if test "$host_cpu" = ia64; then
- # AIX 5 now supports IA64 processor
- lt_prog_compiler_static_GCJ='-Bstatic'
- else
- lt_prog_compiler_static_GCJ='-bnso -bI:/lib/syscalls.exp'
- fi
- ;;
- darwin*)
- # PIC is the default on this platform
- # Common symbols not allowed in MH_DYLIB files
- case $cc_basename in
- xlc*)
- lt_prog_compiler_pic_GCJ='-qnocommon'
- lt_prog_compiler_wl_GCJ='-Wl,'
- ;;
- esac
- ;;
-
- mingw* | cygwin* | pw32* | os2*)
- # This hack is so that the source file can tell whether it is being
- # built for inclusion in a dll (and should export symbols for example).
- lt_prog_compiler_pic_GCJ='-DDLL_EXPORT'
- ;;
-
- hpux9* | hpux10* | hpux11*)
- lt_prog_compiler_wl_GCJ='-Wl,'
- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
- # not for PA HP-UX.
- case $host_cpu in
- hppa*64*|ia64*)
- # +Z the default
- ;;
- *)
- lt_prog_compiler_pic_GCJ='+Z'
- ;;
- esac
- # Is there a better lt_prog_compiler_static that works with the bundled CC?
- lt_prog_compiler_static_GCJ='${wl}-a ${wl}archive'
- ;;
-
- irix5* | irix6* | nonstopux*)
- lt_prog_compiler_wl_GCJ='-Wl,'
- # PIC (with -KPIC) is the default.
- lt_prog_compiler_static_GCJ='-non_shared'
- ;;
-
- newsos6)
- lt_prog_compiler_pic_GCJ='-KPIC'
- lt_prog_compiler_static_GCJ='-Bstatic'
- ;;
-
- linux* | k*bsd*-gnu)
- case $cc_basename in
- icc* | ecc*)
- lt_prog_compiler_wl_GCJ='-Wl,'
- lt_prog_compiler_pic_GCJ='-KPIC'
- lt_prog_compiler_static_GCJ='-static'
- ;;
- pgcc* | pgf77* | pgf90* | pgf95*)
- # Portland Group compilers (*not* the Pentium gcc compiler,
- # which looks to be a dead project)
- lt_prog_compiler_wl_GCJ='-Wl,'
- lt_prog_compiler_pic_GCJ='-fpic'
- lt_prog_compiler_static_GCJ='-Bstatic'
- ;;
- ccc*)
- lt_prog_compiler_wl_GCJ='-Wl,'
- # All Alpha code is PIC.
- lt_prog_compiler_static_GCJ='-non_shared'
- ;;
- *)
- case `$CC -V 2>&1 | sed 5q` in
- *Sun\ C*)
- # Sun C 5.9
- lt_prog_compiler_pic_GCJ='-KPIC'
- lt_prog_compiler_static_GCJ='-Bstatic'
- lt_prog_compiler_wl_GCJ='-Wl,'
- ;;
- *Sun\ F*)
- # Sun Fortran 8.3 passes all unrecognized flags to the linker
- lt_prog_compiler_pic_GCJ='-KPIC'
- lt_prog_compiler_static_GCJ='-Bstatic'
- lt_prog_compiler_wl_GCJ=''
- ;;
- esac
- ;;
- esac
- ;;
-
- osf3* | osf4* | osf5*)
- lt_prog_compiler_wl_GCJ='-Wl,'
- # All OSF/1 code is PIC.
- lt_prog_compiler_static_GCJ='-non_shared'
- ;;
-
- rdos*)
- lt_prog_compiler_static_GCJ='-non_shared'
- ;;
-
- solaris*)
- lt_prog_compiler_pic_GCJ='-KPIC'
- lt_prog_compiler_static_GCJ='-Bstatic'
- case $cc_basename in
- f77* | f90* | f95*)
- lt_prog_compiler_wl_GCJ='-Qoption ld ';;
- *)
- lt_prog_compiler_wl_GCJ='-Wl,';;
- esac
- ;;
-
- sunos4*)
- lt_prog_compiler_wl_GCJ='-Qoption ld '
- lt_prog_compiler_pic_GCJ='-PIC'
- lt_prog_compiler_static_GCJ='-Bstatic'
- ;;
-
- sysv4 | sysv4.2uw2* | sysv4.3*)
- lt_prog_compiler_wl_GCJ='-Wl,'
- lt_prog_compiler_pic_GCJ='-KPIC'
- lt_prog_compiler_static_GCJ='-Bstatic'
- ;;
-
- sysv4*MP*)
- if test -d /usr/nec ;then
- lt_prog_compiler_pic_GCJ='-Kconform_pic'
- lt_prog_compiler_static_GCJ='-Bstatic'
- fi
- ;;
-
- sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
- lt_prog_compiler_wl_GCJ='-Wl,'
- lt_prog_compiler_pic_GCJ='-KPIC'
- lt_prog_compiler_static_GCJ='-Bstatic'
- ;;
-
- unicos*)
- lt_prog_compiler_wl_GCJ='-Wl,'
- lt_prog_compiler_can_build_shared_GCJ=no
- ;;
-
- uts4*)
- lt_prog_compiler_pic_GCJ='-pic'
- lt_prog_compiler_static_GCJ='-Bstatic'
- ;;
-
- *)
- lt_prog_compiler_can_build_shared_GCJ=no
- ;;
- esac
- fi
-
-{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_GCJ" >&5
-echo "${ECHO_T}$lt_prog_compiler_pic_GCJ" >&6; }
-
-#
-# Check to make sure the PIC flag actually works.
-#
-if test -n "$lt_prog_compiler_pic_GCJ"; then
-
-{ echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works" >&5
-echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works... $ECHO_C" >&6; }
-if test "${lt_prog_compiler_pic_works_GCJ+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- lt_prog_compiler_pic_works_GCJ=no
- ac_outfile=conftest.$ac_objext
- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
- lt_compiler_flag="$lt_prog_compiler_pic_GCJ"
- # Insert the option either (1) after the last *FLAGS variable, or
- # (2) before a word containing "conftest.", or (3) at the end.
- # Note that $ac_compile itself does not contain backslashes and begins
- # with a dollar sign (not a hyphen), so the echo should work correctly.
- # The option is referenced via a variable to avoid confusing sed.
- lt_compile=`echo "$ac_compile" | $SED \
- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
- -e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:15956: $lt_compile\"" >&5)
- (eval "$lt_compile" 2>conftest.err)
- ac_status=$?
- cat conftest.err >&5
- echo "$as_me:15960: \$? = $ac_status" >&5
- if (exit $ac_status) && test -s "$ac_outfile"; then
- # The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings other than the usual output.
- $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
- if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
- lt_prog_compiler_pic_works_GCJ=yes
- fi
- fi
- $rm conftest*
-
-fi
-{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_GCJ" >&5
-echo "${ECHO_T}$lt_prog_compiler_pic_works_GCJ" >&6; }
-
-if test x"$lt_prog_compiler_pic_works_GCJ" = xyes; then
- case $lt_prog_compiler_pic_GCJ in
- "" | " "*) ;;
- *) lt_prog_compiler_pic_GCJ=" $lt_prog_compiler_pic_GCJ" ;;
- esac
-else
- lt_prog_compiler_pic_GCJ=
- lt_prog_compiler_can_build_shared_GCJ=no
-fi
-
-fi
-case $host_os in
- # For platforms which do not support PIC, -DPIC is meaningless:
- *djgpp*)
- lt_prog_compiler_pic_GCJ=
- ;;
- *)
- lt_prog_compiler_pic_GCJ="$lt_prog_compiler_pic_GCJ"
- ;;
-esac
-
-#
-# Check to make sure the static flag actually works.
-#
-wl=$lt_prog_compiler_wl_GCJ eval lt_tmp_static_flag=\"$lt_prog_compiler_static_GCJ\"
-{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
-echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; }
-if test "${lt_prog_compiler_static_works_GCJ+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- lt_prog_compiler_static_works_GCJ=no
- save_LDFLAGS="$LDFLAGS"
- LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
- echo "$lt_simple_link_test_code" > conftest.$ac_ext
- if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
- # The linker can only warn and ignore the option if not recognized
- # So say no if there are warnings
- if test -s conftest.err; then
- # Append any errors to the config.log.
- cat conftest.err 1>&5
- $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
- if diff conftest.exp conftest.er2 >/dev/null; then
- lt_prog_compiler_static_works_GCJ=yes
- fi
- else
- lt_prog_compiler_static_works_GCJ=yes
- fi
- fi
- $rm conftest*
- LDFLAGS="$save_LDFLAGS"
-
-fi
-{ echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works_GCJ" >&5
-echo "${ECHO_T}$lt_prog_compiler_static_works_GCJ" >&6; }
-
-if test x"$lt_prog_compiler_static_works_GCJ" = xyes; then
- :
-else
- lt_prog_compiler_static_GCJ=
-fi
-
-
-{ echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
-echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; }
-if test "${lt_cv_prog_compiler_c_o_GCJ+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- lt_cv_prog_compiler_c_o_GCJ=no
- $rm -r conftest 2>/dev/null
- mkdir conftest
- cd conftest
- mkdir out
- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-
- lt_compiler_flag="-o out/conftest2.$ac_objext"
- # Insert the option either (1) after the last *FLAGS variable, or
- # (2) before a word containing "conftest.", or (3) at the end.
- # Note that $ac_compile itself does not contain backslashes and begins
- # with a dollar sign (not a hyphen), so the echo should work correctly.
- lt_compile=`echo "$ac_compile" | $SED \
- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
- -e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:16060: $lt_compile\"" >&5)
- (eval "$lt_compile" 2>out/conftest.err)
- ac_status=$?
- cat out/conftest.err >&5
- echo "$as_me:16064: \$? = $ac_status" >&5
- if (exit $ac_status) && test -s out/conftest2.$ac_objext
- then
- # The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings
- $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
- $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
- if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
- lt_cv_prog_compiler_c_o_GCJ=yes
- fi
- fi
- chmod u+w . 2>&5
- $rm conftest*
- # SGI C++ compiler will create directory out/ii_files/ for
- # template instantiation
- test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
- $rm out/* && rmdir out
- cd ..
- rmdir conftest
- $rm conftest*
-
-fi
-{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_GCJ" >&5
-echo "${ECHO_T}$lt_cv_prog_compiler_c_o_GCJ" >&6; }
-
-
-hard_links="nottested"
-if test "$lt_cv_prog_compiler_c_o_GCJ" = no && test "$need_locks" != no; then
- # do not overwrite the value of need_locks provided by the user
- { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
-echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; }
- hard_links=yes
- $rm conftest*
- ln conftest.a conftest.b 2>/dev/null && hard_links=no
- touch conftest.a
- ln conftest.a conftest.b 2>&5 || hard_links=no
- ln conftest.a conftest.b 2>/dev/null && hard_links=no
- { echo "$as_me:$LINENO: result: $hard_links" >&5
-echo "${ECHO_T}$hard_links" >&6; }
- if test "$hard_links" = no; then
- { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
-echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
- need_locks=warn
- fi
-else
- need_locks=no
-fi
-
-{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
-echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; }
-
- runpath_var=
- allow_undefined_flag_GCJ=
- enable_shared_with_static_runtimes_GCJ=no
- archive_cmds_GCJ=
- archive_expsym_cmds_GCJ=
- old_archive_From_new_cmds_GCJ=
- old_archive_from_expsyms_cmds_GCJ=
- export_dynamic_flag_spec_GCJ=
- whole_archive_flag_spec_GCJ=
- thread_safe_flag_spec_GCJ=
- hardcode_libdir_flag_spec_GCJ=
- hardcode_libdir_flag_spec_ld_GCJ=
- hardcode_libdir_separator_GCJ=
- hardcode_direct_GCJ=no
- hardcode_minus_L_GCJ=no
- hardcode_shlibpath_var_GCJ=unsupported
- link_all_deplibs_GCJ=unknown
- hardcode_automatic_GCJ=no
- module_cmds_GCJ=
- module_expsym_cmds_GCJ=
- always_export_symbols_GCJ=no
- export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
- # include_expsyms should be a list of space-separated symbols to be *always*
- # included in the symbol list
- include_expsyms_GCJ=
- # exclude_expsyms can be an extended regexp of symbols to exclude
- # it will be wrapped by ` (' and `)$', so one must not match beginning or
- # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
- # as well as any symbol that contains `d'.
- exclude_expsyms_GCJ="_GLOBAL_OFFSET_TABLE_"
- # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
- # platforms (ab)use it in PIC code, but their linkers get confused if
- # the symbol is explicitly referenced. Since portable code cannot
- # rely on this symbol name, it's probably fine to never include it in
- # preloaded symbol tables.
- extract_expsyms_cmds=
- # Just being paranoid about ensuring that cc_basename is set.
- for cc_temp in $compiler""; do
- case $cc_temp in
- compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
- distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
- \-*) ;;
- *) break;;
- esac
-done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-
- case $host_os in
- cygwin* | mingw* | pw32*)
- # FIXME: the MSVC++ port hasn't been tested in a loooong time
- # When not using gcc, we currently assume that we are using
- # Microsoft Visual C++.
- if test "$GCC" != yes; then
- with_gnu_ld=no
- fi
- ;;
- interix*)
- # we just hope/assume this is gcc and not c89 (= MSVC++)
- with_gnu_ld=yes
- ;;
- openbsd*)
- with_gnu_ld=no
- ;;
- esac
-
- ld_shlibs_GCJ=yes
- if test "$with_gnu_ld" = yes; then
- # If archive_cmds runs LD, not CC, wlarc should be empty
- wlarc='${wl}'
-
- # Set some defaults for GNU ld with shared library support. These
- # are reset later if shared libraries are not supported. Putting them
- # here allows them to be overridden if necessary.
- runpath_var=LD_RUN_PATH
- hardcode_libdir_flag_spec_GCJ='${wl}--rpath ${wl}$libdir'
- export_dynamic_flag_spec_GCJ='${wl}--export-dynamic'
- # ancient GNU ld didn't support --whole-archive et. al.
- if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
- whole_archive_flag_spec_GCJ="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
- else
- whole_archive_flag_spec_GCJ=
- fi
- supports_anon_versioning=no
- case `$LD -v 2>/dev/null` in
- *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
- *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
- *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
- *\ 2.11.*) ;; # other 2.11 versions
- *) supports_anon_versioning=yes ;;
- esac
-
- # See if GNU ld supports shared libraries.
- case $host_os in
- aix3* | aix4* | aix5*)
- # On AIX/PPC, the GNU linker is very broken
- if test "$host_cpu" != ia64; then
- ld_shlibs_GCJ=no
- cat <<EOF 1>&2
-
-*** Warning: the GNU linker, at least up to release 2.9.1, is reported
-*** to be unable to reliably create shared libraries on AIX.
-*** Therefore, libtool is disabling shared libraries support. If you
-*** really care for shared libraries, you may want to modify your PATH
-*** so that a non-GNU linker is found, and then restart.
-
-EOF
- fi
- ;;
-
- amigaos*)
- archive_cmds_GCJ='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
- hardcode_libdir_flag_spec_GCJ='-L$libdir'
- hardcode_minus_L_GCJ=yes
-
- # Samuel A. Falvo II <kc5tja at dolphin.openprojects.net> reports
- # that the semantics of dynamic libraries on AmigaOS, at least up
- # to version 4, is to share data among multiple programs linked
- # with the same dynamic library. Since this doesn't match the
- # behavior of shared libraries on other platforms, we can't use
- # them.
- ld_shlibs_GCJ=no
- ;;
-
- beos*)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- allow_undefined_flag_GCJ=unsupported
- # Joseph Beckenbach <jrb3 at best.com> says some releases of gcc
- # support --undefined. This deserves some investigation. FIXME
- archive_cmds_GCJ='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- else
- ld_shlibs_GCJ=no
- fi
- ;;
-
- cygwin* | mingw* | pw32*)
- # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, GCJ) is actually meaningless,
- # as there is no search path for DLLs.
- hardcode_libdir_flag_spec_GCJ='-L$libdir'
- allow_undefined_flag_GCJ=unsupported
- always_export_symbols_GCJ=no
- enable_shared_with_static_runtimes_GCJ=yes
- export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
-
- if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
- archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- # If the export-symbols file already is a .def file (1st line
- # is EXPORTS), use it as is; otherwise, prepend...
- archive_expsym_cmds_GCJ='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
- cp $export_symbols $output_objdir/$soname.def;
- else
- echo EXPORTS > $output_objdir/$soname.def;
- cat $export_symbols >> $output_objdir/$soname.def;
- fi~
- $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- else
- ld_shlibs_GCJ=no
- fi
- ;;
-
- interix[3-9]*)
- hardcode_direct_GCJ=no
- hardcode_shlibpath_var_GCJ=no
- hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
- export_dynamic_flag_spec_GCJ='${wl}-E'
- # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
- # Instead, shared libraries are loaded at an image base (0x10000000 by
- # default) and relocated if they conflict, which is a slow very memory
- # consuming and fragmenting process. To avoid this, we pick a random,
- # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
- # time. Moving up from 0x10000000 also allows more sbrk(2) space.
- archive_cmds_GCJ='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- archive_expsym_cmds_GCJ='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- ;;
-
- gnu* | linux* | k*bsd*-gnu)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- tmp_addflag=
- case $cc_basename,$host_cpu in
- pgcc*) # Portland Group C compiler
- whole_archive_flag_spec_GCJ='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
- tmp_addflag=' $pic_flag'
- ;;
- pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers
- whole_archive_flag_spec_GCJ='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
- tmp_addflag=' $pic_flag -Mnomain' ;;
- ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
- tmp_addflag=' -i_dynamic' ;;
- efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64
- tmp_addflag=' -i_dynamic -nofor_main' ;;
- ifc* | ifort*) # Intel Fortran compiler
- tmp_addflag=' -nofor_main' ;;
- esac
- case `$CC -V 2>&1 | sed 5q` in
- *Sun\ C*) # Sun C 5.9
- whole_archive_flag_spec_GCJ='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
- tmp_sharedflag='-G' ;;
- *Sun\ F*) # Sun Fortran 8.3
- tmp_sharedflag='-G' ;;
- *)
- tmp_sharedflag='-shared' ;;
- esac
- archive_cmds_GCJ='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-
- if test $supports_anon_versioning = yes; then
- archive_expsym_cmds_GCJ='$echo "{ global:" > $output_objdir/$libname.ver~
- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
- $echo "local: *; };" >> $output_objdir/$libname.ver~
- $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
- fi
- else
- ld_shlibs_GCJ=no
- fi
- ;;
-
- netbsd*)
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- archive_cmds_GCJ='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
- wlarc=
- else
- archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- fi
- ;;
-
- solaris*)
- if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
- ld_shlibs_GCJ=no
- cat <<EOF 1>&2
-
-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
-*** create shared libraries on Solaris systems. Therefore, libtool
-*** is disabling shared libraries support. We urge you to upgrade GNU
-*** binutils to release 2.9.1 or newer. Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
-
-EOF
- elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- else
- ld_shlibs_GCJ=no
- fi
- ;;
-
- sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
- case `$LD -v 2>&1` in
- *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
- ld_shlibs_GCJ=no
- cat <<_LT_EOF 1>&2
-
-*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
-*** reliably create shared libraries on SCO systems. Therefore, libtool
-*** is disabling shared libraries support. We urge you to upgrade GNU
-*** binutils to release 2.16.91.0.3 or newer. Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
-
-_LT_EOF
- ;;
- *)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- hardcode_libdir_flag_spec_GCJ='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
- archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
- archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
- else
- ld_shlibs_GCJ=no
- fi
- ;;
- esac
- ;;
-
- sunos4*)
- archive_cmds_GCJ='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- wlarc=
- hardcode_direct_GCJ=yes
- hardcode_shlibpath_var_GCJ=no
- ;;
-
- *)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- else
- ld_shlibs_GCJ=no
- fi
- ;;
- esac
-
- if test "$ld_shlibs_GCJ" = no; then
- runpath_var=
- hardcode_libdir_flag_spec_GCJ=
- export_dynamic_flag_spec_GCJ=
- whole_archive_flag_spec_GCJ=
- fi
- else
- # PORTME fill in a description of your system's linker (not GNU ld)
- case $host_os in
- aix3*)
- allow_undefined_flag_GCJ=unsupported
- always_export_symbols_GCJ=yes
- archive_expsym_cmds_GCJ='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
- # Note: this linker hardcodes the directories in LIBPATH if there
- # are no directories specified by -L.
- hardcode_minus_L_GCJ=yes
- if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
- # Neither direct hardcoding nor static linking is supported with a
- # broken collect2.
- hardcode_direct_GCJ=unsupported
- fi
- ;;
-
- aix4* | aix5*)
- if test "$host_cpu" = ia64; then
- # On IA64, the linker does run time linking by default, so we don't
- # have to do anything special.
- aix_use_runtimelinking=no
- exp_sym_flag='-Bexport'
- no_entry_flag=""
- else
- # If we're using GNU nm, then we don't want the "-C" option.
- # -C means demangle to AIX nm, but means don't demangle with GNU nm
- if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
- export_symbols_cmds_GCJ='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
- else
- export_symbols_cmds_GCJ='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
- fi
- aix_use_runtimelinking=no
-
- # Test if we are trying to use run time linking or normal
- # AIX style linking. If -brtl is somewhere in LDFLAGS, we
- # need to do runtime linking.
- case $host_os in aix4.[23]|aix4.[23].*|aix5*)
- for ld_flag in $LDFLAGS; do
- if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
- aix_use_runtimelinking=yes
- break
- fi
- done
- ;;
- esac
-
- exp_sym_flag='-bexport'
- no_entry_flag='-bnoentry'
- fi
-
- # When large executables or shared objects are built, AIX ld can
- # have problems creating the table of contents. If linking a library
- # or program results in "error TOC overflow" add -mminimal-toc to
- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-
- archive_cmds_GCJ=''
- hardcode_direct_GCJ=yes
- hardcode_libdir_separator_GCJ=':'
- link_all_deplibs_GCJ=yes
-
- if test "$GCC" = yes; then
- case $host_os in aix4.[012]|aix4.[012].*)
- # We only want to do this on AIX 4.2 and lower, the check
- # below for broken collect2 doesn't work under 4.3+
- collect2name=`${CC} -print-prog-name=collect2`
- if test -f "$collect2name" && \
- strings "$collect2name" | grep resolve_lib_name >/dev/null
- then
- # We have reworked collect2
- :
- else
- # We have old collect2
- hardcode_direct_GCJ=unsupported
- # It fails to find uninstalled libraries when the uninstalled
- # path is not listed in the libpath. Setting hardcode_minus_L
- # to unsupported forces relinking
- hardcode_minus_L_GCJ=yes
- hardcode_libdir_flag_spec_GCJ='-L$libdir'
- hardcode_libdir_separator_GCJ=
- fi
- ;;
- esac
- shared_flag='-shared'
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag="$shared_flag "'${wl}-G'
- fi
- else
- # not using gcc
- if test "$host_cpu" = ia64; then
- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
- # chokes on -Wl,-G. The following line is correct:
- shared_flag='-G'
- else
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag='${wl}-G'
- else
- shared_flag='${wl}-bM:SRE'
- fi
- fi
- fi
-
- # It seems that -bexpall does not export symbols beginning with
- # underscore (_), so it is better to generate a list of symbols to export.
- always_export_symbols_GCJ=yes
- if test "$aix_use_runtimelinking" = yes; then
- # Warning - without using the other runtime loading flags (-brtl),
- # -berok will link without error, but may produce a broken library.
- allow_undefined_flag_GCJ='-berok'
- # Determine the default libpath from the value encoded in an empty executable.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext &&
- $as_test_x conftest$ac_exeext; then
-
-lt_aix_libpath_sed='
- /Import File Strings/,/^$/ {
- /^0/ {
- s/^0 *\(.*\)$/\1/
- p
- }
- }'
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then
- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-fi
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-
- hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath"
- archive_expsym_cmds_GCJ="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
- else
- if test "$host_cpu" = ia64; then
- hardcode_libdir_flag_spec_GCJ='${wl}-R $libdir:/usr/lib:/lib'
- allow_undefined_flag_GCJ="-z nodefs"
- archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
- else
- # Determine the default libpath from the value encoded in an empty executable.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext &&
- $as_test_x conftest$ac_exeext; then
-
-lt_aix_libpath_sed='
- /Import File Strings/,/^$/ {
- /^0/ {
- s/^0 *\(.*\)$/\1/
- p
- }
- }'
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then
- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-fi
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-
- hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath"
- # Warning - without using the other run time loading flags,
- # -berok will link without error, but may produce a broken library.
- no_undefined_flag_GCJ=' ${wl}-bernotok'
- allow_undefined_flag_GCJ=' ${wl}-berok'
- # Exported symbols can be pulled into shared objects from archives
- whole_archive_flag_spec_GCJ='$convenience'
- archive_cmds_need_lc_GCJ=yes
- # This is similar to how AIX traditionally builds its shared libraries.
- archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
- fi
- fi
- ;;
-
- amigaos*)
- archive_cmds_GCJ='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
- hardcode_libdir_flag_spec_GCJ='-L$libdir'
- hardcode_minus_L_GCJ=yes
- # see comment about different semantics on the GNU ld section
- ld_shlibs_GCJ=no
- ;;
-
- bsdi[45]*)
- export_dynamic_flag_spec_GCJ=-rdynamic
- ;;
-
- cygwin* | mingw* | pw32*)
- # When not using gcc, we currently assume that we are using
- # Microsoft Visual C++.
- # hardcode_libdir_flag_spec is actually meaningless, as there is
- # no search path for DLLs.
- hardcode_libdir_flag_spec_GCJ=' '
- allow_undefined_flag_GCJ=unsupported
- # Tell ltmain to make .lib files, not .a files.
- libext=lib
- # Tell ltmain to make .dll files, not .so files.
- shrext_cmds=".dll"
- # FIXME: Setting linknames here is a bad hack.
- archive_cmds_GCJ='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
- # The linker will automatically build a .lib file if we build a DLL.
- old_archive_From_new_cmds_GCJ='true'
- # FIXME: Should let the user specify the lib program.
- old_archive_cmds_GCJ='lib -OUT:$oldlib$oldobjs$old_deplibs'
- fix_srcfile_path_GCJ='`cygpath -w "$srcfile"`'
- enable_shared_with_static_runtimes_GCJ=yes
- ;;
-
- darwin* | rhapsody*)
- case $host_os in
- rhapsody* | darwin1.[012])
- allow_undefined_flag_GCJ='${wl}-undefined ${wl}suppress'
- ;;
- *) # Darwin 1.3 on
- if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
- allow_undefined_flag_GCJ='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
- else
- case ${MACOSX_DEPLOYMENT_TARGET} in
- 10.[012])
- allow_undefined_flag_GCJ='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
- ;;
- 10.*)
- allow_undefined_flag_GCJ='${wl}-undefined ${wl}dynamic_lookup'
- ;;
- esac
- fi
- ;;
- esac
- archive_cmds_need_lc_GCJ=no
- hardcode_direct_GCJ=no
- hardcode_automatic_GCJ=yes
- hardcode_shlibpath_var_GCJ=unsupported
- whole_archive_flag_spec_GCJ=''
- link_all_deplibs_GCJ=yes
- if test "$GCC" = yes ; then
- output_verbose_link_cmd='echo'
- archive_cmds_GCJ='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
- module_cmds_GCJ='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
- archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- module_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- else
- case $cc_basename in
- xlc*)
- output_verbose_link_cmd='echo'
- archive_cmds_GCJ='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
- module_cmds_GCJ='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
- archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- module_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- ;;
- *)
- ld_shlibs_GCJ=no
- ;;
- esac
- fi
- ;;
-
- dgux*)
- archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_libdir_flag_spec_GCJ='-L$libdir'
- hardcode_shlibpath_var_GCJ=no
- ;;
-
- freebsd1*)
- ld_shlibs_GCJ=no
- ;;
-
- # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
- # support. Future versions do this automatically, but an explicit c++rt0.o
- # does not break anything, and helps significantly (at the cost of a little
- # extra space).
- freebsd2.2*)
- archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
- hardcode_libdir_flag_spec_GCJ='-R$libdir'
- hardcode_direct_GCJ=yes
- hardcode_shlibpath_var_GCJ=no
- ;;
-
- # Unfortunately, older versions of FreeBSD 2 do not have this feature.
- freebsd2*)
- archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- hardcode_direct_GCJ=yes
- hardcode_minus_L_GCJ=yes
- hardcode_shlibpath_var_GCJ=no
- ;;
-
- # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
- freebsd* | dragonfly*)
- archive_cmds_GCJ='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
- hardcode_libdir_flag_spec_GCJ='-R$libdir'
- hardcode_direct_GCJ=yes
- hardcode_shlibpath_var_GCJ=no
- ;;
-
- hpux9*)
- if test "$GCC" = yes; then
- archive_cmds_GCJ='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
- else
- archive_cmds_GCJ='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
- fi
- hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir'
- hardcode_libdir_separator_GCJ=:
- hardcode_direct_GCJ=yes
-
- # hardcode_minus_L: Not really in the search PATH,
- # but as the default location of the library.
- hardcode_minus_L_GCJ=yes
- export_dynamic_flag_spec_GCJ='${wl}-E'
- ;;
-
- hpux10*)
- if test "$GCC" = yes -a "$with_gnu_ld" = no; then
- archive_cmds_GCJ='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
- else
- archive_cmds_GCJ='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
- fi
- if test "$with_gnu_ld" = no; then
- hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir'
- hardcode_libdir_separator_GCJ=:
-
- hardcode_direct_GCJ=yes
- export_dynamic_flag_spec_GCJ='${wl}-E'
-
- # hardcode_minus_L: Not really in the search PATH,
- # but as the default location of the library.
- hardcode_minus_L_GCJ=yes
- fi
- ;;
-
- hpux11*)
- if test "$GCC" = yes -a "$with_gnu_ld" = no; then
- case $host_cpu in
- hppa*64*)
- archive_cmds_GCJ='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- ia64*)
- archive_cmds_GCJ='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- *)
- archive_cmds_GCJ='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- esac
- else
- case $host_cpu in
- hppa*64*)
- archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- ia64*)
- archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- *)
- archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- esac
- fi
- if test "$with_gnu_ld" = no; then
- hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir'
- hardcode_libdir_separator_GCJ=:
-
- case $host_cpu in
- hppa*64*|ia64*)
- hardcode_libdir_flag_spec_ld_GCJ='+b $libdir'
- hardcode_direct_GCJ=no
- hardcode_shlibpath_var_GCJ=no
- ;;
- *)
- hardcode_direct_GCJ=yes
- export_dynamic_flag_spec_GCJ='${wl}-E'
-
- # hardcode_minus_L: Not really in the search PATH,
- # but as the default location of the library.
- hardcode_minus_L_GCJ=yes
- ;;
- esac
- fi
- ;;
-
- irix5* | irix6* | nonstopux*)
- if test "$GCC" = yes; then
- archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- else
- archive_cmds_GCJ='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
- hardcode_libdir_flag_spec_ld_GCJ='-rpath $libdir'
- fi
- hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator_GCJ=:
- link_all_deplibs_GCJ=yes
- ;;
-
- netbsd*)
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
- else
- archive_cmds_GCJ='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
- fi
- hardcode_libdir_flag_spec_GCJ='-R$libdir'
- hardcode_direct_GCJ=yes
- hardcode_shlibpath_var_GCJ=no
- ;;
-
- newsos6)
- archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_direct_GCJ=yes
- hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator_GCJ=:
- hardcode_shlibpath_var_GCJ=no
- ;;
-
- openbsd*)
- if test -f /usr/libexec/ld.so; then
- hardcode_direct_GCJ=yes
- hardcode_shlibpath_var_GCJ=no
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
- hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
- export_dynamic_flag_spec_GCJ='${wl}-E'
- else
- case $host_os in
- openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
- archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- hardcode_libdir_flag_spec_GCJ='-R$libdir'
- ;;
- *)
- archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
- ;;
- esac
- fi
- else
- ld_shlibs_GCJ=no
- fi
- ;;
-
- os2*)
- hardcode_libdir_flag_spec_GCJ='-L$libdir'
- hardcode_minus_L_GCJ=yes
- allow_undefined_flag_GCJ=unsupported
- archive_cmds_GCJ='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
- old_archive_From_new_cmds_GCJ='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
- ;;
-
- osf3*)
- if test "$GCC" = yes; then
- allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*'
- archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- else
- allow_undefined_flag_GCJ=' -expect_unresolved \*'
- archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
- fi
- hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator_GCJ=:
- ;;
-
- osf4* | osf5*) # as osf3* with the addition of -msym flag
- if test "$GCC" = yes; then
- allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*'
- archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
- else
- allow_undefined_flag_GCJ=' -expect_unresolved \*'
- archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
- archive_expsym_cmds_GCJ='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
- $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
-
- # Both c and cxx compiler support -rpath directly
- hardcode_libdir_flag_spec_GCJ='-rpath $libdir'
- fi
- hardcode_libdir_separator_GCJ=:
- ;;
-
- solaris*)
- no_undefined_flag_GCJ=' -z text'
- if test "$GCC" = yes; then
- wlarc='${wl}'
- archive_cmds_GCJ='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
- $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
- else
- wlarc=''
- archive_cmds_GCJ='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
- archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
- fi
- hardcode_libdir_flag_spec_GCJ='-R$libdir'
- hardcode_shlibpath_var_GCJ=no
- case $host_os in
- solaris2.[0-5] | solaris2.[0-5].*) ;;
- *)
- # The compiler driver will combine and reorder linker options,
- # but understands `-z linker_flag'. GCC discards it without `$wl',
- # but is careful enough not to reorder.
- # Supported since Solaris 2.6 (maybe 2.5.1?)
- if test "$GCC" = yes; then
- whole_archive_flag_spec_GCJ='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
- else
- whole_archive_flag_spec_GCJ='-z allextract$convenience -z defaultextract'
- fi
- ;;
- esac
- link_all_deplibs_GCJ=yes
- ;;
-
- sunos4*)
- if test "x$host_vendor" = xsequent; then
- # Use $CC to link under sequent, because it throws in some extra .o
- # files that make .init and .fini sections work.
- archive_cmds_GCJ='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
- else
- archive_cmds_GCJ='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
- fi
- hardcode_libdir_flag_spec_GCJ='-L$libdir'
- hardcode_direct_GCJ=yes
- hardcode_minus_L_GCJ=yes
- hardcode_shlibpath_var_GCJ=no
- ;;
-
- sysv4)
- case $host_vendor in
- sni)
- archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_direct_GCJ=yes # is this really true???
- ;;
- siemens)
- ## LD is ld it makes a PLAMLIB
- ## CC just makes a GrossModule.
- archive_cmds_GCJ='$LD -G -o $lib $libobjs $deplibs $linker_flags'
- reload_cmds_GCJ='$CC -r -o $output$reload_objs'
- hardcode_direct_GCJ=no
- ;;
- motorola)
- archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_direct_GCJ=no #Motorola manual says yes, but my tests say they lie
- ;;
- esac
- runpath_var='LD_RUN_PATH'
- hardcode_shlibpath_var_GCJ=no
- ;;
-
- sysv4.3*)
- archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_shlibpath_var_GCJ=no
- export_dynamic_flag_spec_GCJ='-Bexport'
- ;;
-
- sysv4*MP*)
- if test -d /usr/nec; then
- archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_shlibpath_var_GCJ=no
- runpath_var=LD_RUN_PATH
- hardcode_runpath_var=yes
- ld_shlibs_GCJ=yes
- fi
- ;;
-
- sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
- no_undefined_flag_GCJ='${wl}-z,text'
- archive_cmds_need_lc_GCJ=no
- hardcode_shlibpath_var_GCJ=no
- runpath_var='LD_RUN_PATH'
-
- if test "$GCC" = yes; then
- archive_cmds_GCJ='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds_GCJ='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- else
- archive_cmds_GCJ='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds_GCJ='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- fi
- ;;
-
- sysv5* | sco3.2v5* | sco5v6*)
- # Note: We can NOT use -z defs as we might desire, because we do not
- # link with -lc, and that would cause any symbols used from libc to
- # always be unresolved, which means just about no library would
- # ever link correctly. If we're not using GNU ld we use -z text
- # though, which does catch some bad symbols but isn't as heavy-handed
- # as -z defs.
- no_undefined_flag_GCJ='${wl}-z,text'
- allow_undefined_flag_GCJ='${wl}-z,nodefs'
- archive_cmds_need_lc_GCJ=no
- hardcode_shlibpath_var_GCJ=no
- hardcode_libdir_flag_spec_GCJ='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
- hardcode_libdir_separator_GCJ=':'
- link_all_deplibs_GCJ=yes
- export_dynamic_flag_spec_GCJ='${wl}-Bexport'
- runpath_var='LD_RUN_PATH'
-
- if test "$GCC" = yes; then
- archive_cmds_GCJ='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds_GCJ='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- else
- archive_cmds_GCJ='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds_GCJ='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- fi
- ;;
-
- uts4*)
- archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_libdir_flag_spec_GCJ='-L$libdir'
- hardcode_shlibpath_var_GCJ=no
- ;;
-
- *)
- ld_shlibs_GCJ=no
- ;;
- esac
- fi
-
-{ echo "$as_me:$LINENO: result: $ld_shlibs_GCJ" >&5
-echo "${ECHO_T}$ld_shlibs_GCJ" >&6; }
-test "$ld_shlibs_GCJ" = no && can_build_shared=no
-
-#
-# Do we need to explicitly link libc?
-#
-case "x$archive_cmds_need_lc_GCJ" in
-x|xyes)
- # Assume -lc should be added
- archive_cmds_need_lc_GCJ=yes
-
- if test "$enable_shared" = yes && test "$GCC" = yes; then
- case $archive_cmds_GCJ in
- *'~'*)
- # FIXME: we may have to deal with multi-command sequences.
- ;;
- '$CC '*)
- # Test whether the compiler implicitly links with -lc since on some
- # systems, -lgcc has to come before -lc. If gcc already passes -lc
- # to ld, don't add -lc before -lgcc.
- { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
-echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; }
- $rm conftest*
- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-
- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } 2>conftest.err; then
- soname=conftest
- lib=conftest
- libobjs=conftest.$ac_objext
- deplibs=
- wl=$lt_prog_compiler_wl_GCJ
- pic_flag=$lt_prog_compiler_pic_GCJ
- compiler_flags=-v
- linker_flags=-v
- verstring=
- output_objdir=.
- libname=conftest
- lt_save_allow_undefined_flag=$allow_undefined_flag_GCJ
- allow_undefined_flag_GCJ=
- if { (eval echo "$as_me:$LINENO: \"$archive_cmds_GCJ 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
- (eval $archive_cmds_GCJ 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
- then
- archive_cmds_need_lc_GCJ=no
- else
- archive_cmds_need_lc_GCJ=yes
- fi
- allow_undefined_flag_GCJ=$lt_save_allow_undefined_flag
- else
- cat conftest.err 1>&5
- fi
- $rm conftest*
- { echo "$as_me:$LINENO: result: $archive_cmds_need_lc_GCJ" >&5
-echo "${ECHO_T}$archive_cmds_need_lc_GCJ" >&6; }
- ;;
- esac
- fi
- ;;
-esac
-
-{ echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
-echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; }
-library_names_spec=
-libname_spec='lib$name'
-soname_spec=
-shrext_cmds=".so"
-postinstall_cmds=
-postuninstall_cmds=
-finish_cmds=
-finish_eval=
-shlibpath_var=
-shlibpath_overrides_runpath=unknown
-version_type=none
-dynamic_linker="$host_os ld.so"
-sys_lib_dlsearch_path_spec="/lib /usr/lib"
-
-need_lib_prefix=unknown
-hardcode_into_libs=no
-
-# when you set need_version to no, make sure it does not cause -set_version
-# flags to be left without arguments
-need_version=unknown
-
-case $host_os in
-aix3*)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
- shlibpath_var=LIBPATH
-
- # AIX 3 has no versioning support, so we append a major version to the name.
- soname_spec='${libname}${release}${shared_ext}$major'
- ;;
-
-aix4* | aix5*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- hardcode_into_libs=yes
- if test "$host_cpu" = ia64; then
- # AIX 5 supports IA64
- library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
- shlibpath_var=LD_LIBRARY_PATH
- else
- # With GCC up to 2.95.x, collect2 would create an import file
- # for dependence libraries. The import file would start with
- # the line `#! .'. This would cause the generated library to
- # depend on `.', always an invalid library. This was fixed in
- # development snapshots of GCC prior to 3.0.
- case $host_os in
- aix4 | aix4.[01] | aix4.[01].*)
- if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
- echo ' yes '
- echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
- :
- else
- can_build_shared=no
- fi
- ;;
- esac
- # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
- # soname into executable. Probably we can add versioning support to
- # collect2, so additional links can be useful in future.
- if test "$aix_use_runtimelinking" = yes; then
- # If using run time linking (on AIX 4.2 or later) use lib<name>.so
- # instead of lib<name>.a to let people know that these are not
- # typical AIX shared libraries.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- else
- # We preserve .a as extension for shared libraries through AIX4.2
- # and later when we are not doing run time linking.
- library_names_spec='${libname}${release}.a $libname.a'
- soname_spec='${libname}${release}${shared_ext}$major'
- fi
- shlibpath_var=LIBPATH
- fi
- ;;
-
-amigaos*)
- library_names_spec='$libname.ixlibrary $libname.a'
- # Create ${libname}_ixlibrary.a entries in /sys/libs.
- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
- ;;
-
-beos*)
- library_names_spec='${libname}${shared_ext}'
- dynamic_linker="$host_os ld.so"
- shlibpath_var=LIBRARY_PATH
- ;;
-
-bsdi[45]*)
- version_type=linux
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
- sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
- # the default ld.so.conf also contains /usr/contrib/lib and
- # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
- # libtool to hard-code these into programs
- ;;
-
-cygwin* | mingw* | pw32*)
- version_type=windows
- shrext_cmds=".dll"
- need_version=no
- need_lib_prefix=no
-
- case $GCC,$host_os in
- yes,cygwin* | yes,mingw* | yes,pw32*)
- library_names_spec='$libname.dll.a'
- # DLL is installed to $(libdir)/../bin by postinstall_cmds
- postinstall_cmds='base_file=`basename \${file}`~
- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
- dldir=$destdir/`dirname \$dlpath`~
- test -d \$dldir || mkdir -p \$dldir~
- $install_prog $dir/$dlname \$dldir/$dlname~
- chmod a+x \$dldir/$dlname'
- postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
- dlpath=$dir/\$dldll~
- $rm \$dlpath'
- shlibpath_overrides_runpath=yes
-
- case $host_os in
- cygwin*)
- # Cygwin DLLs use 'cyg' prefix rather than 'lib'
- soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
- sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
- ;;
- mingw*)
- # MinGW DLLs use traditional 'lib' prefix
- soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
- if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
- # It is most probably a Windows format PATH printed by
- # mingw gcc, but we are running on Cygwin. Gcc prints its search
- # path with ; separators, and with drive letters. We can handle the
- # drive letters (cygwin fileutils understands them), so leave them,
- # especially as we might pass files found there to a mingw objdump,
- # which wouldn't understand a cygwinified path. Ahh.
- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
- else
- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
- fi
- ;;
- pw32*)
- # pw32 DLLs use 'pw' prefix rather than 'lib'
- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
- ;;
- esac
- ;;
-
- *)
- library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
- ;;
- esac
- dynamic_linker='Win32 ld.exe'
- # FIXME: first we should search . and the directory the executable is in
- shlibpath_var=PATH
- ;;
-
-darwin* | rhapsody*)
- dynamic_linker="$host_os dyld"
- version_type=darwin
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
- soname_spec='${libname}${release}${major}$shared_ext'
- shlibpath_overrides_runpath=yes
- shlibpath_var=DYLD_LIBRARY_PATH
- shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
-
- sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
- ;;
-
-dgux*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- ;;
-
-freebsd1*)
- dynamic_linker=no
- ;;
-
-freebsd* | dragonfly*)
- # DragonFly does not have aout. When/if they implement a new
- # versioning mechanism, adjust this.
- if test -x /usr/bin/objformat; then
- objformat=`/usr/bin/objformat`
- else
- case $host_os in
- freebsd[123]*) objformat=aout ;;
- *) objformat=elf ;;
- esac
- fi
- version_type=freebsd-$objformat
- case $version_type in
- freebsd-elf*)
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
- need_version=no
- need_lib_prefix=no
- ;;
- freebsd-*)
- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
- need_version=yes
- ;;
- esac
- shlibpath_var=LD_LIBRARY_PATH
- case $host_os in
- freebsd2*)
- shlibpath_overrides_runpath=yes
- ;;
- freebsd3.[01]* | freebsdelf3.[01]*)
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- ;;
- freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
- freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- ;;
- *) # from 4.6 on, and DragonFly
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- ;;
- esac
- ;;
-
-gnu*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- hardcode_into_libs=yes
- ;;
-
-hpux9* | hpux10* | hpux11*)
- # Give a soname corresponding to the major version so that dld.sl refuses to
- # link against other versions.
- version_type=sunos
- need_lib_prefix=no
- need_version=no
- case $host_cpu in
- ia64*)
- shrext_cmds='.so'
- hardcode_into_libs=yes
- dynamic_linker="$host_os dld.so"
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- if test "X$HPUX_IA64_MODE" = X32; then
- sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
- else
- sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
- fi
- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
- ;;
- hppa*64*)
- shrext_cmds='.sl'
- hardcode_into_libs=yes
- dynamic_linker="$host_os dld.sl"
- shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
- ;;
- *)
- shrext_cmds='.sl'
- dynamic_linker="$host_os dld.sl"
- shlibpath_var=SHLIB_PATH
- shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- ;;
- esac
- # HP-UX runs *really* slowly unless shared libraries are mode 555.
- postinstall_cmds='chmod 555 $lib'
- ;;
-
-interix[3-9]*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- ;;
-
-irix5* | irix6* | nonstopux*)
- case $host_os in
- nonstopux*) version_type=nonstopux ;;
- *)
- if test "$lt_cv_prog_gnu_ld" = yes; then
- version_type=linux
- else
- version_type=irix
- fi ;;
- esac
- need_lib_prefix=no
- need_version=no
- soname_spec='${libname}${release}${shared_ext}$major'
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
- case $host_os in
- irix5* | nonstopux*)
- libsuff= shlibsuff=
- ;;
- *)
- case $LD in # libtool.m4 will add one of these switches to LD
- *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
- libsuff= shlibsuff= libmagic=32-bit;;
- *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
- libsuff=32 shlibsuff=N32 libmagic=N32;;
- *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
- libsuff=64 shlibsuff=64 libmagic=64-bit;;
- *) libsuff= shlibsuff= libmagic=never-match;;
- esac
- ;;
- esac
- shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
- shlibpath_overrides_runpath=no
- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
- hardcode_into_libs=yes
- ;;
-
-# No shared lib support for Linux oldld, aout, or coff.
-linux*oldld* | linux*aout* | linux*coff*)
- dynamic_linker=no
- ;;
-
-# This must be Linux ELF.
-linux* | k*bsd*-gnu)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- # This implies no fast_install, which is unacceptable.
- # Some rework will be needed to allow for fast_install
- # before this can be enabled.
- hardcode_into_libs=yes
-
- # Append ld.so.conf contents to the search path
- if test -f /etc/ld.so.conf; then
- lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
- sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
- fi
-
- # We used to test for /lib/ld.so.1 and disable shared libraries on
- # powerpc, because MkLinux only supported shared libraries with the
- # GNU dynamic linker. Since this was broken with cross compilers,
- # most powerpc-linux boxes support dynamic linking these days and
- # people can always --disable-shared, the test was removed, and we
- # assume the GNU/Linux dynamic linker is in use.
- dynamic_linker='GNU/Linux ld.so'
- ;;
-
-netbsd*)
- version_type=sunos
- need_lib_prefix=no
- need_version=no
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
- dynamic_linker='NetBSD (a.out) ld.so'
- else
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- dynamic_linker='NetBSD ld.elf_so'
- fi
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- ;;
-
-newsos6)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- ;;
-
-nto-qnx*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- ;;
-
-openbsd*)
- version_type=sunos
- sys_lib_dlsearch_path_spec="/usr/lib"
- need_lib_prefix=no
- # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
- case $host_os in
- openbsd3.3 | openbsd3.3.*) need_version=yes ;;
- *) need_version=no ;;
- esac
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- case $host_os in
- openbsd2.[89] | openbsd2.[89].*)
- shlibpath_overrides_runpath=no
- ;;
- *)
- shlibpath_overrides_runpath=yes
- ;;
- esac
- else
- shlibpath_overrides_runpath=yes
- fi
- ;;
-
-os2*)
- libname_spec='$name'
- shrext_cmds=".dll"
- need_lib_prefix=no
- library_names_spec='$libname${shared_ext} $libname.a'
- dynamic_linker='OS/2 ld.exe'
- shlibpath_var=LIBPATH
- ;;
-
-osf3* | osf4* | osf5*)
- version_type=osf
- need_lib_prefix=no
- need_version=no
- soname_spec='${libname}${release}${shared_ext}$major'
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- shlibpath_var=LD_LIBRARY_PATH
- sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
- sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
- ;;
-
-rdos*)
- dynamic_linker=no
- ;;
-
-solaris*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- # ldd complains unless libraries are executable
- postinstall_cmds='chmod +x $lib'
- ;;
-
-sunos4*)
- version_type=sunos
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
- finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- if test "$with_gnu_ld" = yes; then
- need_lib_prefix=no
- fi
- need_version=yes
- ;;
-
-sysv4 | sysv4.3*)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- case $host_vendor in
- sni)
- shlibpath_overrides_runpath=no
- need_lib_prefix=no
- export_dynamic_flag_spec='${wl}-Blargedynsym'
- runpath_var=LD_RUN_PATH
- ;;
- siemens)
- need_lib_prefix=no
- ;;
- motorola)
- need_lib_prefix=no
- need_version=no
- shlibpath_overrides_runpath=no
- sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
- ;;
- esac
- ;;
-
-sysv4*MP*)
- if test -d /usr/nec ;then
- version_type=linux
- library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
- soname_spec='$libname${shared_ext}.$major'
- shlibpath_var=LD_LIBRARY_PATH
- fi
- ;;
-
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
- version_type=freebsd-elf
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- hardcode_into_libs=yes
- if test "$with_gnu_ld" = yes; then
- sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
- shlibpath_overrides_runpath=no
- else
- sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
- shlibpath_overrides_runpath=yes
- case $host_os in
- sco3.2v5*)
- sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
- ;;
- esac
- fi
- sys_lib_dlsearch_path_spec='/usr/lib'
- ;;
-
-uts4*)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- ;;
-
-*)
- dynamic_linker=no
- ;;
-esac
-{ echo "$as_me:$LINENO: result: $dynamic_linker" >&5
-echo "${ECHO_T}$dynamic_linker" >&6; }
-test "$dynamic_linker" = no && can_build_shared=no
-
-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
- variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-fi
-
-{ echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
-echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; }
-hardcode_action_GCJ=
-if test -n "$hardcode_libdir_flag_spec_GCJ" || \
- test -n "$runpath_var_GCJ" || \
- test "X$hardcode_automatic_GCJ" = "Xyes" ; then
-
- # We can hardcode non-existant directories.
- if test "$hardcode_direct_GCJ" != no &&
- # If the only mechanism to avoid hardcoding is shlibpath_var, we
- # have to relink, otherwise we might link with an installed library
- # when we should be linking with a yet-to-be-installed one
- ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, GCJ)" != no &&
- test "$hardcode_minus_L_GCJ" != no; then
- # Linking always hardcodes the temporary library directory.
- hardcode_action_GCJ=relink
- else
- # We can link without hardcoding, and we can hardcode nonexisting dirs.
- hardcode_action_GCJ=immediate
- fi
-else
- # We cannot hardcode anything, or else we can only hardcode existing
- # directories.
- hardcode_action_GCJ=unsupported
-fi
-{ echo "$as_me:$LINENO: result: $hardcode_action_GCJ" >&5
-echo "${ECHO_T}$hardcode_action_GCJ" >&6; }
-
-if test "$hardcode_action_GCJ" = relink; then
- # Fast installation is not supported
- enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
- test "$enable_shared" = no; then
- # Fast installation is not necessary
- enable_fast_install=needless
-fi
-
-
-# The else clause should only fire when bootstrapping the
-# libtool distribution, otherwise you forgot to ship ltmain.sh
-# with your package, and you will get complaints that there are
-# no rules to generate ltmain.sh.
-if test -f "$ltmain"; then
- # See if we are running on zsh, and set the options which allow our commands through
- # without removal of \ escapes.
- if test -n "${ZSH_VERSION+set}" ; then
- setopt NO_GLOB_SUBST
- fi
- # Now quote all the things that may contain metacharacters while being
- # careful not to overquote the AC_SUBSTed values. We take copies of the
- # variables and quote the copies for generation of the libtool script.
- for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
- SED SHELL STRIP \
- libname_spec library_names_spec soname_spec extract_expsyms_cmds \
- old_striplib striplib file_magic_cmd finish_cmds finish_eval \
- deplibs_check_method reload_flag reload_cmds need_locks \
- lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
- lt_cv_sys_global_symbol_to_c_name_address \
- sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
- old_postinstall_cmds old_postuninstall_cmds \
- compiler_GCJ \
- CC_GCJ \
- LD_GCJ \
- lt_prog_compiler_wl_GCJ \
- lt_prog_compiler_pic_GCJ \
- lt_prog_compiler_static_GCJ \
- lt_prog_compiler_no_builtin_flag_GCJ \
- export_dynamic_flag_spec_GCJ \
- thread_safe_flag_spec_GCJ \
- whole_archive_flag_spec_GCJ \
- enable_shared_with_static_runtimes_GCJ \
- old_archive_cmds_GCJ \
- old_archive_from_new_cmds_GCJ \
- predep_objects_GCJ \
- postdep_objects_GCJ \
- predeps_GCJ \
- postdeps_GCJ \
- compiler_lib_search_path_GCJ \
- archive_cmds_GCJ \
- archive_expsym_cmds_GCJ \
- postinstall_cmds_GCJ \
- postuninstall_cmds_GCJ \
- old_archive_from_expsyms_cmds_GCJ \
- allow_undefined_flag_GCJ \
- no_undefined_flag_GCJ \
- export_symbols_cmds_GCJ \
- hardcode_libdir_flag_spec_GCJ \
- hardcode_libdir_flag_spec_ld_GCJ \
- hardcode_libdir_separator_GCJ \
- hardcode_automatic_GCJ \
- module_cmds_GCJ \
- module_expsym_cmds_GCJ \
- lt_cv_prog_compiler_c_o_GCJ \
- fix_srcfile_path_GCJ \
- exclude_expsyms_GCJ \
- include_expsyms_GCJ; do
-
- case $var in
- old_archive_cmds_GCJ | \
- old_archive_from_new_cmds_GCJ | \
- archive_cmds_GCJ | \
- archive_expsym_cmds_GCJ | \
- module_cmds_GCJ | \
- module_expsym_cmds_GCJ | \
- old_archive_from_expsyms_cmds_GCJ | \
- export_symbols_cmds_GCJ | \
- extract_expsyms_cmds | reload_cmds | finish_cmds | \
- postinstall_cmds | postuninstall_cmds | \
- old_postinstall_cmds | old_postuninstall_cmds | \
- sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
- # Double-quote double-evaled strings.
- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
- ;;
- *)
- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
- ;;
- esac
- done
-
- case $lt_echo in
- *'\$0 --fallback-echo"')
- lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
- ;;
- esac
-
-cfgfile="$ofile"
-
- cat <<__EOF__ >> "$cfgfile"
-# ### BEGIN LIBTOOL TAG CONFIG: $tagname
-
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-
-# Shell to use when invoking shell scripts.
-SHELL=$lt_SHELL
-
-# Whether or not to build shared libraries.
-build_libtool_libs=$enable_shared
-
-# Whether or not to build static libraries.
-build_old_libs=$enable_static
-
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=$archive_cmds_need_lc_GCJ
-
-# Whether or not to disallow shared libs when runtime libs are static
-allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_GCJ
-
-# Whether or not to optimize for fast installation.
-fast_install=$enable_fast_install
-
-# The host system.
-host_alias=$host_alias
-host=$host
-host_os=$host_os
-
-# The build system.
-build_alias=$build_alias
-build=$build
-build_os=$build_os
-
-# An echo program that does not interpret backslashes.
-echo=$lt_echo
-
-# The archiver.
-AR=$lt_AR
-AR_FLAGS=$lt_AR_FLAGS
-
-# A C compiler.
-LTCC=$lt_LTCC
-
-# LTCC compiler flags.
-LTCFLAGS=$lt_LTCFLAGS
-
-# A language-specific compiler.
-CC=$lt_compiler_GCJ
-
-# Is the compiler the GNU C compiler?
-with_gcc=$GCC_GCJ
-
-# An ERE matcher.
-EGREP=$lt_EGREP
-
-# The linker used to build libraries.
-LD=$lt_LD_GCJ
-
-# Whether we need hard or soft links.
-LN_S=$lt_LN_S
-
-# A BSD-compatible nm program.
-NM=$lt_NM
-
-# A symbol stripping program
-STRIP=$lt_STRIP
-
-# Used to examine libraries when file_magic_cmd begins "file"
-MAGIC_CMD=$MAGIC_CMD
-
-# Used on cygwin: DLL creation program.
-DLLTOOL="$DLLTOOL"
-
-# Used on cygwin: object dumper.
-OBJDUMP="$OBJDUMP"
-
-# Used on cygwin: assembler.
-AS="$AS"
-
-# The name of the directory that contains temporary libtool files.
-objdir=$objdir
-
-# How to create reloadable object files.
-reload_flag=$lt_reload_flag
-reload_cmds=$lt_reload_cmds
-
-# How to pass a linker flag through the compiler.
-wl=$lt_lt_prog_compiler_wl_GCJ
-
-# Object file suffix (normally "o").
-objext="$ac_objext"
-
-# Old archive suffix (normally "a").
-libext="$libext"
-
-# Shared library suffix (normally ".so").
-shrext_cmds='$shrext_cmds'
-
-# Executable file suffix (normally "").
-exeext="$exeext"
-
-# Additional compiler flags for building library objects.
-pic_flag=$lt_lt_prog_compiler_pic_GCJ
-pic_mode=$pic_mode
-
-# What is the maximum length of a command?
-max_cmd_len=$lt_cv_sys_max_cmd_len
-
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o=$lt_lt_cv_prog_compiler_c_o_GCJ
-
-# Must we lock files when doing compilation?
-need_locks=$lt_need_locks
-
-# Do we need the lib prefix for modules?
-need_lib_prefix=$need_lib_prefix
-
-# Do we need a version for libraries?
-need_version=$need_version
-
-# Whether dlopen is supported.
-dlopen_support=$enable_dlopen
-
-# Whether dlopen of programs is supported.
-dlopen_self=$enable_dlopen_self
-
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=$enable_dlopen_self_static
-
-# Compiler flag to prevent dynamic linking.
-link_static_flag=$lt_lt_prog_compiler_static_GCJ
-
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_GCJ
-
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_GCJ
-
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec=$lt_whole_archive_flag_spec_GCJ
-
-# Compiler flag to generate thread-safe objects.
-thread_safe_flag_spec=$lt_thread_safe_flag_spec_GCJ
-
-# Library versioning type.
-version_type=$version_type
-
-# Format of library name prefix.
-libname_spec=$lt_libname_spec
-
-# List of archive names. First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME.
-library_names_spec=$lt_library_names_spec
-
-# The coded name of the library, if different from the real name.
-soname_spec=$lt_soname_spec
-
-# Commands used to build and install an old-style archive.
-RANLIB=$lt_RANLIB
-old_archive_cmds=$lt_old_archive_cmds_GCJ
-old_postinstall_cmds=$lt_old_postinstall_cmds
-old_postuninstall_cmds=$lt_old_postuninstall_cmds
-
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_GCJ
-
-# Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_GCJ
-
-# Commands used to build and install a shared archive.
-archive_cmds=$lt_archive_cmds_GCJ
-archive_expsym_cmds=$lt_archive_expsym_cmds_GCJ
-postinstall_cmds=$lt_postinstall_cmds
-postuninstall_cmds=$lt_postuninstall_cmds
-
-# Commands used to build a loadable module (assumed same as above if empty)
-module_cmds=$lt_module_cmds_GCJ
-module_expsym_cmds=$lt_module_expsym_cmds_GCJ
-
-# Commands to strip libraries.
-old_striplib=$lt_old_striplib
-striplib=$lt_striplib
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predep_objects=$lt_predep_objects_GCJ
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdep_objects=$lt_postdep_objects_GCJ
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predeps=$lt_predeps_GCJ
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdeps=$lt_postdeps_GCJ
-
-# The library search path used internally by the compiler when linking
-# a shared library.
-compiler_lib_search_path=$lt_compiler_lib_search_path_GCJ
-
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method=$lt_deplibs_check_method
-
-# Command to use when deplibs_check_method == file_magic.
-file_magic_cmd=$lt_file_magic_cmd
-
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=$lt_allow_undefined_flag_GCJ
-
-# Flag that forces no undefined symbols.
-no_undefined_flag=$lt_no_undefined_flag_GCJ
-
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds=$lt_finish_cmds
-
-# Same as above, but a single script fragment to be evaled but not shown.
-finish_eval=$lt_finish_eval
-
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-
-# Transform the output of nm in a proper C declaration
-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-
-# Transform the output of nm in a C name address pair
-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-
-# This is the shared library runtime path variable.
-runpath_var=$runpath_var
-
-# This is the shared library path variable.
-shlibpath_var=$shlibpath_var
-
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-
-# How to hardcode a shared library path into an executable.
-hardcode_action=$hardcode_action_GCJ
-
-# Whether we should hardcode library paths into libraries.
-hardcode_into_libs=$hardcode_into_libs
-
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_GCJ
-
-# If ld is used when linking, flag to hardcode \$libdir into
-# a binary during linking. This must work even if \$libdir does
-# not exist.
-hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_GCJ
-
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator=$lt_hardcode_libdir_separator_GCJ
-
-# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct=$hardcode_direct_GCJ
-
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L=$hardcode_minus_L_GCJ
-
-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-# the resulting binary.
-hardcode_shlibpath_var=$hardcode_shlibpath_var_GCJ
-
-# Set to yes if building a shared library automatically hardcodes DIR into the library
-# and all subsequent libraries and executables linked against it.
-hardcode_automatic=$hardcode_automatic_GCJ
-
-# Variables whose values should be saved in libtool wrapper scripts and
-# restored at relink time.
-variables_saved_for_relink="$variables_saved_for_relink"
-
-# Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=$link_all_deplibs_GCJ
-
-# Compile-time system search path for libraries
-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-
-# Run-time system search path for libraries
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-
-# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path=$lt_fix_srcfile_path
-
-# Set to yes if exported symbols are required.
-always_export_symbols=$always_export_symbols_GCJ
-
-# The commands to list exported symbols.
-export_symbols_cmds=$lt_export_symbols_cmds_GCJ
-
-# The commands to extract the exported symbol list from a shared archive.
-extract_expsyms_cmds=$lt_extract_expsyms_cmds
-
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms=$lt_exclude_expsyms_GCJ
-
-# Symbols that must always be exported.
-include_expsyms=$lt_include_expsyms_GCJ
-
-# ### END LIBTOOL TAG CONFIG: $tagname
-
-__EOF__
-
-
-else
- # If there is no Makefile yet, we rely on a make rule to execute
- # `config.status --recheck' to rerun these tests and create the
- # libtool script then.
- ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
- if test -f "$ltmain_in"; then
- test -f Makefile && make "$ltmain"
- fi
-fi
-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-CC="$lt_save_CC"
-
- else
- tagname=""
- fi
- ;;
-
- RC)
-
-
-# Source file extension for RC test sources.
-ac_ext=rc
-
-# Object file extension for compiled RC test sources.
-objext=o
-objext_RC=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
-
-# Code to be used in simple link tests
-lt_simple_link_test_code="$lt_simple_compile_test_code"
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-
-# If no C compiler was specified, use CC.
-LTCC=${LTCC-"$CC"}
-
-# If no C compiler flags were specified, use CFLAGS.
-LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-
-# Allow CC to be a program name with arguments.
-compiler=$CC
-
-
-# save warnings/boilerplate of simple test code
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_compile_test_code" >conftest.$ac_ext
-eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_compiler_boilerplate=`cat conftest.err`
-$rm conftest*
-
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_link_test_code" >conftest.$ac_ext
-eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_linker_boilerplate=`cat conftest.err`
-$rm conftest*
-
-
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-CC=${RC-"windres"}
-compiler=$CC
-compiler_RC=$CC
-for cc_temp in $compiler""; do
- case $cc_temp in
- compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
- distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
- \-*) ;;
- *) break;;
- esac
-done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-
-lt_cv_prog_compiler_c_o_RC=yes
-
-# The else clause should only fire when bootstrapping the
-# libtool distribution, otherwise you forgot to ship ltmain.sh
-# with your package, and you will get complaints that there are
-# no rules to generate ltmain.sh.
-if test -f "$ltmain"; then
- # See if we are running on zsh, and set the options which allow our commands through
- # without removal of \ escapes.
- if test -n "${ZSH_VERSION+set}" ; then
- setopt NO_GLOB_SUBST
- fi
- # Now quote all the things that may contain metacharacters while being
- # careful not to overquote the AC_SUBSTed values. We take copies of the
- # variables and quote the copies for generation of the libtool script.
- for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
- SED SHELL STRIP \
- libname_spec library_names_spec soname_spec extract_expsyms_cmds \
- old_striplib striplib file_magic_cmd finish_cmds finish_eval \
- deplibs_check_method reload_flag reload_cmds need_locks \
- lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
- lt_cv_sys_global_symbol_to_c_name_address \
- sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
- old_postinstall_cmds old_postuninstall_cmds \
- compiler_RC \
- CC_RC \
- LD_RC \
- lt_prog_compiler_wl_RC \
- lt_prog_compiler_pic_RC \
- lt_prog_compiler_static_RC \
- lt_prog_compiler_no_builtin_flag_RC \
- export_dynamic_flag_spec_RC \
- thread_safe_flag_spec_RC \
- whole_archive_flag_spec_RC \
- enable_shared_with_static_runtimes_RC \
- old_archive_cmds_RC \
- old_archive_from_new_cmds_RC \
- predep_objects_RC \
- postdep_objects_RC \
- predeps_RC \
- postdeps_RC \
- compiler_lib_search_path_RC \
- archive_cmds_RC \
- archive_expsym_cmds_RC \
- postinstall_cmds_RC \
- postuninstall_cmds_RC \
- old_archive_from_expsyms_cmds_RC \
- allow_undefined_flag_RC \
- no_undefined_flag_RC \
- export_symbols_cmds_RC \
- hardcode_libdir_flag_spec_RC \
- hardcode_libdir_flag_spec_ld_RC \
- hardcode_libdir_separator_RC \
- hardcode_automatic_RC \
- module_cmds_RC \
- module_expsym_cmds_RC \
- lt_cv_prog_compiler_c_o_RC \
- fix_srcfile_path_RC \
- exclude_expsyms_RC \
- include_expsyms_RC; do
-
- case $var in
- old_archive_cmds_RC | \
- old_archive_from_new_cmds_RC | \
- archive_cmds_RC | \
- archive_expsym_cmds_RC | \
- module_cmds_RC | \
- module_expsym_cmds_RC | \
- old_archive_from_expsyms_cmds_RC | \
- export_symbols_cmds_RC | \
- extract_expsyms_cmds | reload_cmds | finish_cmds | \
- postinstall_cmds | postuninstall_cmds | \
- old_postinstall_cmds | old_postuninstall_cmds | \
- sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
- # Double-quote double-evaled strings.
- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
- ;;
- *)
- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
- ;;
- esac
- done
-
- case $lt_echo in
- *'\$0 --fallback-echo"')
- lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
- ;;
- esac
-
-cfgfile="$ofile"
-
- cat <<__EOF__ >> "$cfgfile"
-# ### BEGIN LIBTOOL TAG CONFIG: $tagname
-
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-
-# Shell to use when invoking shell scripts.
-SHELL=$lt_SHELL
-
-# Whether or not to build shared libraries.
-build_libtool_libs=$enable_shared
-
-# Whether or not to build static libraries.
-build_old_libs=$enable_static
-
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=$archive_cmds_need_lc_RC
-
-# Whether or not to disallow shared libs when runtime libs are static
-allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_RC
-
-# Whether or not to optimize for fast installation.
-fast_install=$enable_fast_install
-
-# The host system.
-host_alias=$host_alias
-host=$host
-host_os=$host_os
-
-# The build system.
-build_alias=$build_alias
-build=$build
-build_os=$build_os
-
-# An echo program that does not interpret backslashes.
-echo=$lt_echo
-
-# The archiver.
-AR=$lt_AR
-AR_FLAGS=$lt_AR_FLAGS
-
-# A C compiler.
-LTCC=$lt_LTCC
-
-# LTCC compiler flags.
-LTCFLAGS=$lt_LTCFLAGS
-
-# A language-specific compiler.
-CC=$lt_compiler_RC
-
-# Is the compiler the GNU C compiler?
-with_gcc=$GCC_RC
-
-# An ERE matcher.
-EGREP=$lt_EGREP
-
-# The linker used to build libraries.
-LD=$lt_LD_RC
-
-# Whether we need hard or soft links.
-LN_S=$lt_LN_S
-
-# A BSD-compatible nm program.
-NM=$lt_NM
-
-# A symbol stripping program
-STRIP=$lt_STRIP
-
-# Used to examine libraries when file_magic_cmd begins "file"
-MAGIC_CMD=$MAGIC_CMD
-
-# Used on cygwin: DLL creation program.
-DLLTOOL="$DLLTOOL"
-
-# Used on cygwin: object dumper.
-OBJDUMP="$OBJDUMP"
-
-# Used on cygwin: assembler.
-AS="$AS"
-
-# The name of the directory that contains temporary libtool files.
-objdir=$objdir
-
-# How to create reloadable object files.
-reload_flag=$lt_reload_flag
-reload_cmds=$lt_reload_cmds
-
-# How to pass a linker flag through the compiler.
-wl=$lt_lt_prog_compiler_wl_RC
-
-# Object file suffix (normally "o").
-objext="$ac_objext"
-
-# Old archive suffix (normally "a").
-libext="$libext"
-
-# Shared library suffix (normally ".so").
-shrext_cmds='$shrext_cmds'
-
-# Executable file suffix (normally "").
-exeext="$exeext"
-
-# Additional compiler flags for building library objects.
-pic_flag=$lt_lt_prog_compiler_pic_RC
-pic_mode=$pic_mode
-
-# What is the maximum length of a command?
-max_cmd_len=$lt_cv_sys_max_cmd_len
-
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o=$lt_lt_cv_prog_compiler_c_o_RC
-
-# Must we lock files when doing compilation?
-need_locks=$lt_need_locks
-
-# Do we need the lib prefix for modules?
-need_lib_prefix=$need_lib_prefix
-
-# Do we need a version for libraries?
-need_version=$need_version
-
-# Whether dlopen is supported.
-dlopen_support=$enable_dlopen
-
-# Whether dlopen of programs is supported.
-dlopen_self=$enable_dlopen_self
-
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=$enable_dlopen_self_static
-
-# Compiler flag to prevent dynamic linking.
-link_static_flag=$lt_lt_prog_compiler_static_RC
-
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_RC
-
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_RC
-
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec=$lt_whole_archive_flag_spec_RC
-
-# Compiler flag to generate thread-safe objects.
-thread_safe_flag_spec=$lt_thread_safe_flag_spec_RC
-
-# Library versioning type.
-version_type=$version_type
-
-# Format of library name prefix.
-libname_spec=$lt_libname_spec
-
-# List of archive names. First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME.
-library_names_spec=$lt_library_names_spec
-
-# The coded name of the library, if different from the real name.
-soname_spec=$lt_soname_spec
-
-# Commands used to build and install an old-style archive.
-RANLIB=$lt_RANLIB
-old_archive_cmds=$lt_old_archive_cmds_RC
-old_postinstall_cmds=$lt_old_postinstall_cmds
-old_postuninstall_cmds=$lt_old_postuninstall_cmds
-
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_RC
-
-# Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_RC
-
-# Commands used to build and install a shared archive.
-archive_cmds=$lt_archive_cmds_RC
-archive_expsym_cmds=$lt_archive_expsym_cmds_RC
-postinstall_cmds=$lt_postinstall_cmds
-postuninstall_cmds=$lt_postuninstall_cmds
-
-# Commands used to build a loadable module (assumed same as above if empty)
-module_cmds=$lt_module_cmds_RC
-module_expsym_cmds=$lt_module_expsym_cmds_RC
-
-# Commands to strip libraries.
-old_striplib=$lt_old_striplib
-striplib=$lt_striplib
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predep_objects=$lt_predep_objects_RC
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdep_objects=$lt_postdep_objects_RC
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predeps=$lt_predeps_RC
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdeps=$lt_postdeps_RC
-
-# The library search path used internally by the compiler when linking
-# a shared library.
-compiler_lib_search_path=$lt_compiler_lib_search_path_RC
-
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method=$lt_deplibs_check_method
-
-# Command to use when deplibs_check_method == file_magic.
-file_magic_cmd=$lt_file_magic_cmd
-
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=$lt_allow_undefined_flag_RC
-
-# Flag that forces no undefined symbols.
-no_undefined_flag=$lt_no_undefined_flag_RC
-
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds=$lt_finish_cmds
-
-# Same as above, but a single script fragment to be evaled but not shown.
-finish_eval=$lt_finish_eval
-
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-
-# Transform the output of nm in a proper C declaration
-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-
-# Transform the output of nm in a C name address pair
-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-
-# This is the shared library runtime path variable.
-runpath_var=$runpath_var
-
-# This is the shared library path variable.
-shlibpath_var=$shlibpath_var
-
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-
-# How to hardcode a shared library path into an executable.
-hardcode_action=$hardcode_action_RC
-
-# Whether we should hardcode library paths into libraries.
-hardcode_into_libs=$hardcode_into_libs
-
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_RC
-
-# If ld is used when linking, flag to hardcode \$libdir into
-# a binary during linking. This must work even if \$libdir does
-# not exist.
-hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_RC
-
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator=$lt_hardcode_libdir_separator_RC
-
-# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct=$hardcode_direct_RC
-
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L=$hardcode_minus_L_RC
-
-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-# the resulting binary.
-hardcode_shlibpath_var=$hardcode_shlibpath_var_RC
-
-# Set to yes if building a shared library automatically hardcodes DIR into the library
-# and all subsequent libraries and executables linked against it.
-hardcode_automatic=$hardcode_automatic_RC
-
-# Variables whose values should be saved in libtool wrapper scripts and
-# restored at relink time.
-variables_saved_for_relink="$variables_saved_for_relink"
-
-# Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=$link_all_deplibs_RC
-
-# Compile-time system search path for libraries
-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-
-# Run-time system search path for libraries
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-
-# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path=$lt_fix_srcfile_path
-
-# Set to yes if exported symbols are required.
-always_export_symbols=$always_export_symbols_RC
-
-# The commands to list exported symbols.
-export_symbols_cmds=$lt_export_symbols_cmds_RC
-
-# The commands to extract the exported symbol list from a shared archive.
-extract_expsyms_cmds=$lt_extract_expsyms_cmds
-
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms=$lt_exclude_expsyms_RC
-
-# Symbols that must always be exported.
-include_expsyms=$lt_include_expsyms_RC
-
-# ### END LIBTOOL TAG CONFIG: $tagname
-
-__EOF__
-
-
-else
- # If there is no Makefile yet, we rely on a make rule to execute
- # `config.status --recheck' to rerun these tests and create the
- # libtool script then.
- ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
- if test -f "$ltmain_in"; then
- test -f Makefile && make "$ltmain"
- fi
-fi
-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-CC="$lt_save_CC"
-
- ;;
-
- *)
- { { echo "$as_me:$LINENO: error: Unsupported tag name: $tagname" >&5
-echo "$as_me: error: Unsupported tag name: $tagname" >&2;}
- { (exit 1); exit 1; }; }
- ;;
- esac
-
- # Append the new tag name to the list of available tags.
- if test -n "$tagname" ; then
- available_tags="$available_tags $tagname"
- fi
- fi
- done
- IFS="$lt_save_ifs"
-
- # Now substitute the updated list of available tags.
- if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then
- mv "${ofile}T" "$ofile"
- chmod +x "$ofile"
- else
- rm -f "${ofile}T"
- { { echo "$as_me:$LINENO: error: unable to update list of available tagged configurations." >&5
-echo "$as_me: error: unable to update list of available tagged configurations." >&2;}
- { (exit 1); exit 1; }; }
- fi
-fi
-
-
-
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-
-# Prevent multiple expansion
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-am__api_version='1.10'
-
-{ echo "$as_me:$LINENO: checking whether build environment is sane" >&5
-echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6; }
-# Just in case
-sleep 1
-echo timestamp > conftest.file
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments. Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
- set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
- if test "$*" = "X"; then
- # -L didn't work.
- set X `ls -t $srcdir/configure conftest.file`
- fi
- rm -f conftest.file
- if test "$*" != "X $srcdir/configure conftest.file" \
- && test "$*" != "X conftest.file $srcdir/configure"; then
-
- # If neither matched, then we have a broken ls. This can happen
- # if, for instance, CONFIG_SHELL is bash and it inherits a
- # broken ls alias from the environment. This has actually
- # happened. Such a system could not be considered "sane".
- { { echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken
-alias in your environment" >&5
-echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken
-alias in your environment" >&2;}
- { (exit 1); exit 1; }; }
- fi
-
- test "$2" = conftest.file
- )
-then
- # Ok.
- :
-else
- { { echo "$as_me:$LINENO: error: newly created file is older than distributed files!
-Check your system clock" >&5
-echo "$as_me: error: newly created file is older than distributed files!
-Check your system clock" >&2;}
- { (exit 1); exit 1; }; }
-fi
-{ echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6; }
-test "$program_prefix" != NONE &&
- program_transform_name="s&^&$program_prefix&;$program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
- program_transform_name="s&\$&$program_suffix&;$program_transform_name"
-# Double any \ or $. echo might interpret backslashes.
-# By default was `s,x,x', remove it if useless.
-cat <<\_ACEOF >conftest.sed
-s/[\\$]/&&/g;s/;s,x,x,$//
-_ACEOF
-program_transform_name=`echo $program_transform_name | sed -f conftest.sed`
-rm -f conftest.sed
-
-# expand $ac_aux_dir to an absolute path
-am_aux_dir=`cd $ac_aux_dir && pwd`
-
-test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
-# Use eval to expand $SHELL
-if eval "$MISSING --run true"; then
- am_missing_run="$MISSING --run "
-else
- am_missing_run=
- { echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5
-echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
-fi
-
-{ echo "$as_me:$LINENO: checking for a thread-safe mkdir -p" >&5
-echo $ECHO_N "checking for a thread-safe mkdir -p... $ECHO_C" >&6; }
-if test -z "$MKDIR_P"; then
- if test "${ac_cv_path_mkdir+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_prog in mkdir gmkdir; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue
- case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
- 'mkdir (GNU coreutils) '* | \
- 'mkdir (coreutils) '* | \
- 'mkdir (fileutils) '4.1*)
- ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext
- break 3;;
- esac
- done
- done
-done
-IFS=$as_save_IFS
-
-fi
-
- if test "${ac_cv_path_mkdir+set}" = set; then
- MKDIR_P="$ac_cv_path_mkdir -p"
- else
- # As a last resort, use the slow shell script. Don't cache a
- # value for MKDIR_P within a source directory, because that will
- # break other packages using the cache if that directory is
- # removed, or if the value is a relative name.
- test -d ./--version && rmdir ./--version
- MKDIR_P="$ac_install_sh -d"
- fi
-fi
-{ echo "$as_me:$LINENO: result: $MKDIR_P" >&5
-echo "${ECHO_T}$MKDIR_P" >&6; }
-
-mkdir_p="$MKDIR_P"
-case $mkdir_p in
- [\\/$]* | ?:[\\/]*) ;;
- */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
-esac
-
-for ac_prog in gawk mawk nawk awk
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_AWK+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$AWK"; then
- ac_cv_prog_AWK="$AWK" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_AWK="$ac_prog"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-AWK=$ac_cv_prog_AWK
-if test -n "$AWK"; then
- { echo "$as_me:$LINENO: result: $AWK" >&5
-echo "${ECHO_T}$AWK" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
- test -n "$AWK" && break
-done
-
-{ echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
-echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6; }
-set x ${MAKE-make}; ac_make=`echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
-if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.make <<\_ACEOF
-SHELL = /bin/sh
-all:
- @echo '@@@%%%=$(MAKE)=@@@%%%'
-_ACEOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-case `${MAKE-make} -f conftest.make 2>/dev/null` in
- *@@@%%%=?*=@@@%%%*)
- eval ac_cv_prog_make_${ac_make}_set=yes;;
- *)
- eval ac_cv_prog_make_${ac_make}_set=no;;
-esac
-rm -f conftest.make
-fi
-if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
- { echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6; }
- SET_MAKE=
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
- SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-rm -rf .tst 2>/dev/null
-mkdir .tst 2>/dev/null
-if test -d .tst; then
- am__leading_dot=.
-else
- am__leading_dot=_
-fi
-rmdir .tst 2>/dev/null
-
-DEPDIR="${am__leading_dot}deps"
-
-ac_config_commands="$ac_config_commands depfiles"
-
-
-am_make=${MAKE-make}
-cat > confinc << 'END'
-am__doit:
- @echo done
-.PHONY: am__doit
-END
-# If we don't find an include directive, just comment out the code.
-{ echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5
-echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6; }
-am__include="#"
-am__quote=
-_am_result=none
-# First try GNU make style include.
-echo "include confinc" > confmf
-# We grep out `Entering directory' and `Leaving directory'
-# messages which can occur if `w' ends up in MAKEFLAGS.
-# In particular we don't look at `^make:' because GNU make might
-# be invoked under some other name (usually "gmake"), in which
-# case it prints its new name instead of `make'.
-if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
- am__include=include
- am__quote=
- _am_result=GNU
-fi
-# Now try BSD make style include.
-if test "$am__include" = "#"; then
- echo '.include "confinc"' > confmf
- if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
- am__include=.include
- am__quote="\""
- _am_result=BSD
- fi
-fi
-
-
-{ echo "$as_me:$LINENO: result: $_am_result" >&5
-echo "${ECHO_T}$_am_result" >&6; }
-rm -f confinc confmf
-
-# Check whether --enable-dependency-tracking was given.
-if test "${enable_dependency_tracking+set}" = set; then
- enableval=$enable_dependency_tracking;
-fi
-
-if test "x$enable_dependency_tracking" != xno; then
- am_depcomp="$ac_aux_dir/depcomp"
- AMDEPBACKSLASH='\'
-fi
- if test "x$enable_dependency_tracking" != xno; then
- AMDEP_TRUE=
- AMDEP_FALSE='#'
-else
- AMDEP_TRUE='#'
- AMDEP_FALSE=
-fi
-
-
-if test "`cd $srcdir && pwd`" != "`pwd`"; then
- # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
- # is not polluted with repeated "-I."
- am__isrc=' -I$(srcdir)'
- # test to see if srcdir already configured
- if test -f $srcdir/config.status; then
- { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5
-echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;}
- { (exit 1); exit 1; }; }
- fi
-fi
-
-# test whether we have cygpath
-if test -z "$CYGPATH_W"; then
- if (cygpath --version) >/dev/null 2>/dev/null; then
- CYGPATH_W='cygpath -w'
- else
- CYGPATH_W=echo
- fi
-fi
-
-
-# Define the identity of the package.
- PACKAGE=OpenBSM
- VERSION=1.0
-
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE "$PACKAGE"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define VERSION "$VERSION"
-_ACEOF
-
-# Some tools Automake needs.
-
-ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
-
-
-AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
-
-
-AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
-
-
-AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
-
-
-MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
-
-install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"}
-
-# Installed binaries are usually stripped using `strip' when the user
-# run `make install-strip'. However `strip' might not be the right
-# tool to use in cross-compilation environments, therefore Automake
-# will honor the `STRIP' environment variable to overrule this program.
-if test "$cross_compiling" != no; then
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
-set dummy ${ac_tool_prefix}strip; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_STRIP+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$STRIP"; then
- ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_STRIP="${ac_tool_prefix}strip"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-STRIP=$ac_cv_prog_STRIP
-if test -n "$STRIP"; then
- { echo "$as_me:$LINENO: result: $STRIP" >&5
-echo "${ECHO_T}$STRIP" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_STRIP"; then
- ac_ct_STRIP=$STRIP
- # Extract the first word of "strip", so it can be a program name with args.
-set dummy strip; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$ac_ct_STRIP"; then
- ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_STRIP="strip"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
-if test -n "$ac_ct_STRIP"; then
- { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
-echo "${ECHO_T}$ac_ct_STRIP" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
- if test "x$ac_ct_STRIP" = x; then
- STRIP=":"
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf at gnu.org." >&5
-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf at gnu.org." >&2;}
-ac_tool_warned=yes ;;
-esac
- STRIP=$ac_ct_STRIP
- fi
-else
- STRIP="$ac_cv_prog_STRIP"
-fi
-
-fi
-INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
-
-# We need awk for the "check" target. The system "awk" is bad on
-# some platforms.
-# Always define AMTAR for backward compatibility.
-
-AMTAR=${AMTAR-"${am_missing_run}tar"}
-
-am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'
-
-
-
-
-depcc="$CC" am_compiler_list=
-
-{ echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
-echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; }
-if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
- # We make a subdir and do the tests there. Otherwise we can end up
- # making bogus files that we don't know about and never remove. For
- # instance it was reported that on HP-UX the gcc test will end up
- # making a dummy file named `D' -- because `-MD' means `put the output
- # in D'.
- mkdir conftest.dir
- # Copy depcomp to subdir because otherwise we won't find it if we're
- # using a relative directory.
- cp "$am_depcomp" conftest.dir
- cd conftest.dir
- # We will build objects and dependencies in a subdirectory because
- # it helps to detect inapplicable dependency modes. For instance
- # both Tru64's cc and ICC support -MD to output dependencies as a
- # side effect of compilation, but ICC will put the dependencies in
- # the current directory while Tru64 will put them in the object
- # directory.
- mkdir sub
-
- am_cv_CC_dependencies_compiler_type=none
- if test "$am_compiler_list" = ""; then
- am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
- fi
- for depmode in $am_compiler_list; do
- # Setup a source with many dependencies, because some compilers
- # like to wrap large dependency lists on column 80 (with \), and
- # we should not choose a depcomp mode which is confused by this.
- #
- # We need to recreate these files for each test, as the compiler may
- # overwrite some of them when testing with obscure command lines.
- # This happens at least with the AIX C compiler.
- : > sub/conftest.c
- for i in 1 2 3 4 5 6; do
- echo '#include "conftst'$i'.h"' >> sub/conftest.c
- # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
- # Solaris 8's {/usr,}/bin/sh.
- touch sub/conftst$i.h
- done
- echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
-
- case $depmode in
- nosideeffect)
- # after this tag, mechanisms are not by side-effect, so they'll
- # only be used when explicitly requested
- if test "x$enable_dependency_tracking" = xyes; then
- continue
- else
- break
- fi
- ;;
- none) break ;;
- esac
- # We check with `-c' and `-o' for the sake of the "dashmstdout"
- # mode. It turns out that the SunPro C++ compiler does not properly
- # handle `-M -o', and we need to detect this.
- if depmode=$depmode \
- source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
- depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
- $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
- >/dev/null 2>conftest.err &&
- grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
- grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
- grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
- ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
- # icc doesn't choke on unknown options, it will just issue warnings
- # or remarks (even with -Werror). So we grep stderr for any message
- # that says an option was ignored or not supported.
- # When given -MP, icc 7.0 and 7.1 complain thusly:
- # icc: Command line warning: ignoring option '-M'; no argument required
- # The diagnosis changed in icc 8.0:
- # icc: Command line remark: option '-MP' not supported
- if (grep 'ignoring option' conftest.err ||
- grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
- am_cv_CC_dependencies_compiler_type=$depmode
- break
- fi
- fi
- done
-
- cd ..
- rm -rf conftest.dir
-else
- am_cv_CC_dependencies_compiler_type=none
-fi
-
-fi
-{ echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
-echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6; }
-CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
-
- if
- test "x$enable_dependency_tracking" != xno \
- && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
- am__fastdepCC_TRUE=
- am__fastdepCC_FALSE='#'
-else
- am__fastdepCC_TRUE='#'
- am__fastdepCC_FALSE=
-fi
-
-
-depcc="$CXX" am_compiler_list=
-
-{ echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
-echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; }
-if test "${am_cv_CXX_dependencies_compiler_type+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
- # We make a subdir and do the tests there. Otherwise we can end up
- # making bogus files that we don't know about and never remove. For
- # instance it was reported that on HP-UX the gcc test will end up
- # making a dummy file named `D' -- because `-MD' means `put the output
- # in D'.
- mkdir conftest.dir
- # Copy depcomp to subdir because otherwise we won't find it if we're
- # using a relative directory.
- cp "$am_depcomp" conftest.dir
- cd conftest.dir
- # We will build objects and dependencies in a subdirectory because
- # it helps to detect inapplicable dependency modes. For instance
- # both Tru64's cc and ICC support -MD to output dependencies as a
- # side effect of compilation, but ICC will put the dependencies in
- # the current directory while Tru64 will put them in the object
- # directory.
- mkdir sub
-
- am_cv_CXX_dependencies_compiler_type=none
- if test "$am_compiler_list" = ""; then
- am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
- fi
- for depmode in $am_compiler_list; do
- # Setup a source with many dependencies, because some compilers
- # like to wrap large dependency lists on column 80 (with \), and
- # we should not choose a depcomp mode which is confused by this.
- #
- # We need to recreate these files for each test, as the compiler may
- # overwrite some of them when testing with obscure command lines.
- # This happens at least with the AIX C compiler.
- : > sub/conftest.c
- for i in 1 2 3 4 5 6; do
- echo '#include "conftst'$i'.h"' >> sub/conftest.c
- # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
- # Solaris 8's {/usr,}/bin/sh.
- touch sub/conftst$i.h
- done
- echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
-
- case $depmode in
- nosideeffect)
- # after this tag, mechanisms are not by side-effect, so they'll
- # only be used when explicitly requested
- if test "x$enable_dependency_tracking" = xyes; then
- continue
- else
- break
- fi
- ;;
- none) break ;;
- esac
- # We check with `-c' and `-o' for the sake of the "dashmstdout"
- # mode. It turns out that the SunPro C++ compiler does not properly
- # handle `-M -o', and we need to detect this.
- if depmode=$depmode \
- source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
- depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
- $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
- >/dev/null 2>conftest.err &&
- grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
- grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
- grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
- ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
- # icc doesn't choke on unknown options, it will just issue warnings
- # or remarks (even with -Werror). So we grep stderr for any message
- # that says an option was ignored or not supported.
- # When given -MP, icc 7.0 and 7.1 complain thusly:
- # icc: Command line warning: ignoring option '-M'; no argument required
- # The diagnosis changed in icc 8.0:
- # icc: Command line remark: option '-MP' not supported
- if (grep 'ignoring option' conftest.err ||
- grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
- am_cv_CXX_dependencies_compiler_type=$depmode
- break
- fi
- fi
- done
-
- cd ..
- rm -rf conftest.dir
-else
- am_cv_CXX_dependencies_compiler_type=none
-fi
-
-fi
-{ echo "$as_me:$LINENO: result: $am_cv_CXX_dependencies_compiler_type" >&5
-echo "${ECHO_T}$am_cv_CXX_dependencies_compiler_type" >&6; }
-CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type
-
- if
- test "x$enable_dependency_tracking" != xno \
- && test "$am_cv_CXX_dependencies_compiler_type" = gcc3; then
- am__fastdepCXX_TRUE=
- am__fastdepCXX_FALSE='#'
-else
- am__fastdepCXX_TRUE='#'
- am__fastdepCXX_FALSE=
-fi
-
-
-
-
-{ echo "$as_me:$LINENO: checking for library containing dlsym" >&5
-echo $ECHO_N "checking for library containing dlsym... $ECHO_C" >&6; }
-if test "${ac_cv_search_dlsym+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_func_search_save_LIBS=$LIBS
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char dlsym ();
-int
-main ()
-{
-return dlsym ();
- ;
- return 0;
-}
-_ACEOF
-for ac_lib in '' dl; do
- if test -z "$ac_lib"; then
- ac_res="none required"
- else
- ac_res=-l$ac_lib
- LIBS="-l$ac_lib $ac_func_search_save_LIBS"
- fi
- rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext &&
- $as_test_x conftest$ac_exeext; then
- ac_cv_search_dlsym=$ac_res
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext
- if test "${ac_cv_search_dlsym+set}" = set; then
- break
-fi
-done
-if test "${ac_cv_search_dlsym+set}" = set; then
- :
-else
- ac_cv_search_dlsym=no
-fi
-rm conftest.$ac_ext
-LIBS=$ac_func_search_save_LIBS
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_search_dlsym" >&5
-echo "${ECHO_T}$ac_cv_search_dlsym" >&6; }
-ac_res=$ac_cv_search_dlsym
-if test "$ac_res" != no; then
- test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
-
-fi
-
-{ echo "$as_me:$LINENO: checking for library containing clock_gettime" >&5
-echo $ECHO_N "checking for library containing clock_gettime... $ECHO_C" >&6; }
-if test "${ac_cv_search_clock_gettime+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_func_search_save_LIBS=$LIBS
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char clock_gettime ();
-int
-main ()
-{
-return clock_gettime ();
- ;
- return 0;
-}
-_ACEOF
-for ac_lib in '' rt; do
- if test -z "$ac_lib"; then
- ac_res="none required"
- else
- ac_res=-l$ac_lib
- LIBS="-l$ac_lib $ac_func_search_save_LIBS"
- fi
- rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext &&
- $as_test_x conftest$ac_exeext; then
- ac_cv_search_clock_gettime=$ac_res
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext
- if test "${ac_cv_search_clock_gettime+set}" = set; then
- break
-fi
-done
-if test "${ac_cv_search_clock_gettime+set}" = set; then
- :
-else
- ac_cv_search_clock_gettime=no
-fi
-rm conftest.$ac_ext
-LIBS=$ac_func_search_save_LIBS
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_search_clock_gettime" >&5
-echo "${ECHO_T}$ac_cv_search_clock_gettime" >&6; }
-ac_res=$ac_cv_search_clock_gettime
-if test "$ac_res" != no; then
- test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
-
-fi
-
-
-# Checks for header files.
-{ echo "$as_me:$LINENO: checking for ANSI C header files" >&5
-echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6; }
-if test "${ac_cv_header_stdc+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <stdlib.h>
-#include <stdarg.h>
-#include <string.h>
-#include <float.h>
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_cv_header_stdc=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_header_stdc=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-
-if test $ac_cv_header_stdc = yes; then
- # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <string.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- $EGREP "memchr" >/dev/null 2>&1; then
- :
-else
- ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-fi
-
-if test $ac_cv_header_stdc = yes; then
- # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <stdlib.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- $EGREP "free" >/dev/null 2>&1; then
- :
-else
- ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-fi
-
-if test $ac_cv_header_stdc = yes; then
- # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
- if test "$cross_compiling" = yes; then
- :
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <ctype.h>
-#include <stdlib.h>
-#if ((' ' & 0x0FF) == 0x020)
-# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
-# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
-#else
-# define ISLOWER(c) \
- (('a' <= (c) && (c) <= 'i') \
- || ('j' <= (c) && (c) <= 'r') \
- || ('s' <= (c) && (c) <= 'z'))
-# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
-#endif
-
-#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
-int
-main ()
-{
- int i;
- for (i = 0; i < 256; i++)
- if (XOR (islower (i), ISLOWER (i))
- || toupper (i) != TOUPPER (i))
- return 2;
- return 0;
-}
-_ACEOF
-rm -f conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- :
-else
- echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
-ac_cv_header_stdc=no
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-
-
-fi
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
-echo "${ECHO_T}$ac_cv_header_stdc" >&6; }
-if test $ac_cv_header_stdc = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define STDC_HEADERS 1
-_ACEOF
-
-fi
-
-{ echo "$as_me:$LINENO: checking for sys/wait.h that is POSIX.1 compatible" >&5
-echo $ECHO_N "checking for sys/wait.h that is POSIX.1 compatible... $ECHO_C" >&6; }
-if test "${ac_cv_header_sys_wait_h+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <sys/types.h>
-#include <sys/wait.h>
-#ifndef WEXITSTATUS
-# define WEXITSTATUS(stat_val) ((unsigned int) (stat_val) >> 8)
-#endif
-#ifndef WIFEXITED
-# define WIFEXITED(stat_val) (((stat_val) & 255) == 0)
-#endif
-
-int
-main ()
-{
- int s;
- wait (&s);
- s = WIFEXITED (s) ? WEXITSTATUS (s) : 1;
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_cv_header_sys_wait_h=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_header_sys_wait_h=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_header_sys_wait_h" >&5
-echo "${ECHO_T}$ac_cv_header_sys_wait_h" >&6; }
-if test $ac_cv_header_sys_wait_h = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_SYS_WAIT_H 1
-_ACEOF
-
-fi
-
-
-
-
-
-for ac_header in endian.h mach/mach.h machine/endian.h sys/endian.h
-do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- { echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-else
- # Is the header compilable?
-{ echo "$as_me:$LINENO: checking $ac_header usability" >&5
-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_header_compiler=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_header_compiler=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-echo "${ECHO_T}$ac_header_compiler" >&6; }
-
-# Is the header present?
-{ echo "$as_me:$LINENO: checking $ac_header presence" >&5
-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <$ac_header>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null && {
- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
- test ! -s conftest.err
- }; then
- ac_header_preproc=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_header_preproc=no
-fi
-
-rm -f conftest.err conftest.$ac_ext
-{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-echo "${ECHO_T}$ac_header_preproc" >&6; }
-
-# So? What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
- yes:no: )
- { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
- ac_header_preproc=yes
- ;;
- no:yes:* )
- { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
-echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
-echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
- ( cat <<\_ASBOX
-## ----------------------------------------------- ##
-## Report this to trustedbsd-audit at TrustesdBSD.org ##
-## ----------------------------------------------- ##
-_ASBOX
- ) | sed "s/^/$as_me: WARNING: /" >&2
- ;;
-esac
-{ echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- eval "$as_ac_Header=\$ac_header_preproc"
-fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-
-fi
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
- cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-
-done
-
-
-# Checks for typedefs, structures, and compiler characteristics.
-{ echo "$as_me:$LINENO: checking for an ANSI C-conforming const" >&5
-echo $ECHO_N "checking for an ANSI C-conforming const... $ECHO_C" >&6; }
-if test "${ac_cv_c_const+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-/* FIXME: Include the comments suggested by Paul. */
-#ifndef __cplusplus
- /* Ultrix mips cc rejects this. */
- typedef int charset[2];
- const charset cs;
- /* SunOS 4.1.1 cc rejects this. */
- char const *const *pcpcc;
- char **ppc;
- /* NEC SVR4.0.2 mips cc rejects this. */
- struct point {int x, y;};
- static struct point const zero = {0,0};
- /* AIX XL C 1.02.0.0 rejects this.
- It does not let you subtract one const X* pointer from another in
- an arm of an if-expression whose if-part is not a constant
- expression */
- const char *g = "string";
- pcpcc = &g + (g ? g-g : 0);
- /* HPUX 7.0 cc rejects these. */
- ++pcpcc;
- ppc = (char**) pcpcc;
- pcpcc = (char const *const *) ppc;
- { /* SCO 3.2v4 cc rejects this. */
- char *t;
- char const *s = 0 ? (char *) 0 : (char const *) 0;
-
- *t++ = 0;
- if (s) return 0;
- }
- { /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */
- int x[] = {25, 17};
- const int *foo = &x[0];
- ++foo;
- }
- { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */
- typedef const int *iptr;
- iptr p = 0;
- ++p;
- }
- { /* AIX XL C 1.02.0.0 rejects this saying
- "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */
- struct s { int j; const int *ap[3]; };
- struct s *b; b->j = 5;
- }
- { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */
- const int foo = 10;
- if (!foo) return 0;
- }
- return !cs[0] && !zero.x;
-#endif
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_cv_c_const=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_c_const=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_c_const" >&5
-echo "${ECHO_T}$ac_cv_c_const" >&6; }
-if test $ac_cv_c_const = no; then
-
-cat >>confdefs.h <<\_ACEOF
-#define const
-_ACEOF
-
-fi
-
-{ echo "$as_me:$LINENO: checking for uid_t in sys/types.h" >&5
-echo $ECHO_N "checking for uid_t in sys/types.h... $ECHO_C" >&6; }
-if test "${ac_cv_type_uid_t+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <sys/types.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- $EGREP "uid_t" >/dev/null 2>&1; then
- ac_cv_type_uid_t=yes
-else
- ac_cv_type_uid_t=no
-fi
-rm -f conftest*
-
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_type_uid_t" >&5
-echo "${ECHO_T}$ac_cv_type_uid_t" >&6; }
-if test $ac_cv_type_uid_t = no; then
-
-cat >>confdefs.h <<\_ACEOF
-#define uid_t int
-_ACEOF
-
-
-cat >>confdefs.h <<\_ACEOF
-#define gid_t int
-_ACEOF
-
-fi
-
-{ echo "$as_me:$LINENO: checking for pid_t" >&5
-echo $ECHO_N "checking for pid_t... $ECHO_C" >&6; }
-if test "${ac_cv_type_pid_t+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-typedef pid_t ac__type_new_;
-int
-main ()
-{
-if ((ac__type_new_ *) 0)
- return 0;
-if (sizeof (ac__type_new_))
- return 0;
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_cv_type_pid_t=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_type_pid_t=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_type_pid_t" >&5
-echo "${ECHO_T}$ac_cv_type_pid_t" >&6; }
-if test $ac_cv_type_pid_t = yes; then
- :
-else
-
-cat >>confdefs.h <<_ACEOF
-#define pid_t int
-_ACEOF
-
-fi
-
-{ echo "$as_me:$LINENO: checking for size_t" >&5
-echo $ECHO_N "checking for size_t... $ECHO_C" >&6; }
-if test "${ac_cv_type_size_t+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-typedef size_t ac__type_new_;
-int
-main ()
-{
-if ((ac__type_new_ *) 0)
- return 0;
-if (sizeof (ac__type_new_))
- return 0;
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_cv_type_size_t=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_type_size_t=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_type_size_t" >&5
-echo "${ECHO_T}$ac_cv_type_size_t" >&6; }
-if test $ac_cv_type_size_t = yes; then
- :
-else
-
-cat >>confdefs.h <<_ACEOF
-#define size_t unsigned int
-_ACEOF
-
-fi
-
-{ echo "$as_me:$LINENO: checking for struct stat.st_rdev" >&5
-echo $ECHO_N "checking for struct stat.st_rdev... $ECHO_C" >&6; }
-if test "${ac_cv_member_struct_stat_st_rdev+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-int
-main ()
-{
-static struct stat ac_aggr;
-if (ac_aggr.st_rdev)
-return 0;
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_cv_member_struct_stat_st_rdev=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-int
-main ()
-{
-static struct stat ac_aggr;
-if (sizeof ac_aggr.st_rdev)
-return 0;
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_cv_member_struct_stat_st_rdev=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_member_struct_stat_st_rdev=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_member_struct_stat_st_rdev" >&5
-echo "${ECHO_T}$ac_cv_member_struct_stat_st_rdev" >&6; }
-if test $ac_cv_member_struct_stat_st_rdev = yes; then
-
-cat >>confdefs.h <<_ACEOF
-#define HAVE_STRUCT_STAT_ST_RDEV 1
-_ACEOF
-
-
-fi
-
-
-{ echo "$as_me:$LINENO: checking for struct ipc_perm.__key" >&5
-echo $ECHO_N "checking for struct ipc_perm.__key... $ECHO_C" >&6; }
-if test "${ac_cv_member_struct_ipc_perm___key+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-#include <sys/types.h>
-#include <sys/ipc.h>
-
-
-int
-main ()
-{
-static struct ipc_perm ac_aggr;
-if (ac_aggr.__key)
-return 0;
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_cv_member_struct_ipc_perm___key=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-#include <sys/types.h>
-#include <sys/ipc.h>
-
-
-int
-main ()
-{
-static struct ipc_perm ac_aggr;
-if (sizeof ac_aggr.__key)
-return 0;
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_cv_member_struct_ipc_perm___key=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_member_struct_ipc_perm___key=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_member_struct_ipc_perm___key" >&5
-echo "${ECHO_T}$ac_cv_member_struct_ipc_perm___key" >&6; }
-if test $ac_cv_member_struct_ipc_perm___key = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_IPC_PERM___KEY
-_ACEOF
-
-fi
-
-
-{ echo "$as_me:$LINENO: checking for struct ipc_perm.__seq" >&5
-echo $ECHO_N "checking for struct ipc_perm.__seq... $ECHO_C" >&6; }
-if test "${ac_cv_member_struct_ipc_perm___seq+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-#include <sys/types.h>
-#include <sys/ipc.h>
-
-
-int
-main ()
-{
-static struct ipc_perm ac_aggr;
-if (ac_aggr.__seq)
-return 0;
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_cv_member_struct_ipc_perm___seq=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-#include <sys/types.h>
-#include <sys/ipc.h>
-
-
-int
-main ()
-{
-static struct ipc_perm ac_aggr;
-if (sizeof ac_aggr.__seq)
-return 0;
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_cv_member_struct_ipc_perm___seq=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_member_struct_ipc_perm___seq=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_member_struct_ipc_perm___seq" >&5
-echo "${ECHO_T}$ac_cv_member_struct_ipc_perm___seq" >&6; }
-if test $ac_cv_member_struct_ipc_perm___seq = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_IPC_PERM___SEQ
-_ACEOF
-
-fi
-
-
-{ echo "$as_me:$LINENO: checking whether time.h and sys/time.h may both be included" >&5
-echo $ECHO_N "checking whether time.h and sys/time.h may both be included... $ECHO_C" >&6; }
-if test "${ac_cv_header_time+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <sys/types.h>
-#include <sys/time.h>
-#include <time.h>
-
-int
-main ()
-{
-if ((struct tm *) 0)
-return 0;
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_cv_header_time=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_header_time=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_header_time" >&5
-echo "${ECHO_T}$ac_cv_header_time" >&6; }
-if test $ac_cv_header_time = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define TIME_WITH_SYS_TIME 1
-_ACEOF
-
-fi
-
-{ echo "$as_me:$LINENO: checking whether struct tm is in sys/time.h or time.h" >&5
-echo $ECHO_N "checking whether struct tm is in sys/time.h or time.h... $ECHO_C" >&6; }
-if test "${ac_cv_struct_tm+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <sys/types.h>
-#include <time.h>
-
-int
-main ()
-{
-struct tm tm;
- int *p = &tm.tm_sec;
- return !p;
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_cv_struct_tm=time.h
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_struct_tm=sys/time.h
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_struct_tm" >&5
-echo "${ECHO_T}$ac_cv_struct_tm" >&6; }
-if test $ac_cv_struct_tm = sys/time.h; then
-
-cat >>confdefs.h <<\_ACEOF
-#define TM_IN_SYS_TIME 1
-_ACEOF
-
-fi
-
-
-# Checks for library functions.
-
-for ac_header in unistd.h
-do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- { echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-else
- # Is the header compilable?
-{ echo "$as_me:$LINENO: checking $ac_header usability" >&5
-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_header_compiler=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_header_compiler=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-echo "${ECHO_T}$ac_header_compiler" >&6; }
-
-# Is the header present?
-{ echo "$as_me:$LINENO: checking $ac_header presence" >&5
-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <$ac_header>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null && {
- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
- test ! -s conftest.err
- }; then
- ac_header_preproc=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_header_preproc=no
-fi
-
-rm -f conftest.err conftest.$ac_ext
-{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-echo "${ECHO_T}$ac_header_preproc" >&6; }
-
-# So? What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
- yes:no: )
- { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
- ac_header_preproc=yes
- ;;
- no:yes:* )
- { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
-echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
-echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
- ( cat <<\_ASBOX
-## ----------------------------------------------- ##
-## Report this to trustedbsd-audit at TrustesdBSD.org ##
-## ----------------------------------------------- ##
-_ASBOX
- ) | sed "s/^/$as_me: WARNING: /" >&2
- ;;
-esac
-{ echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- eval "$as_ac_Header=\$ac_header_preproc"
-fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-
-fi
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
- cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-
-done
-
-{ echo "$as_me:$LINENO: checking for working chown" >&5
-echo $ECHO_N "checking for working chown... $ECHO_C" >&6; }
-if test "${ac_cv_func_chown_works+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test "$cross_compiling" = yes; then
- ac_cv_func_chown_works=no
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-#include <fcntl.h>
-
-int
-main ()
-{
- char *f = "conftest.chown";
- struct stat before, after;
-
- if (creat (f, 0600) < 0)
- return 1;
- if (stat (f, &before) < 0)
- return 1;
- if (chown (f, (uid_t) -1, (gid_t) -1) == -1)
- return 1;
- if (stat (f, &after) < 0)
- return 1;
- return ! (before.st_uid == after.st_uid && before.st_gid == after.st_gid);
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_func_chown_works=yes
-else
- echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
-ac_cv_func_chown_works=no
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-
-
-rm -f conftest.chown
-
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_func_chown_works" >&5
-echo "${ECHO_T}$ac_cv_func_chown_works" >&6; }
-if test $ac_cv_func_chown_works = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_CHOWN 1
-_ACEOF
-
-fi
-
-
-for ac_header in vfork.h
-do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- { echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-else
- # Is the header compilable?
-{ echo "$as_me:$LINENO: checking $ac_header usability" >&5
-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_header_compiler=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_header_compiler=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-echo "${ECHO_T}$ac_header_compiler" >&6; }
-
-# Is the header present?
-{ echo "$as_me:$LINENO: checking $ac_header presence" >&5
-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <$ac_header>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null && {
- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
- test ! -s conftest.err
- }; then
- ac_header_preproc=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_header_preproc=no
-fi
-
-rm -f conftest.err conftest.$ac_ext
-{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-echo "${ECHO_T}$ac_header_preproc" >&6; }
-
-# So? What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
- yes:no: )
- { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
- ac_header_preproc=yes
- ;;
- no:yes:* )
- { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
-echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
-echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
- ( cat <<\_ASBOX
-## ----------------------------------------------- ##
-## Report this to trustedbsd-audit at TrustesdBSD.org ##
-## ----------------------------------------------- ##
-_ASBOX
- ) | sed "s/^/$as_me: WARNING: /" >&2
- ;;
-esac
-{ echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- eval "$as_ac_Header=\$ac_header_preproc"
-fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-
-fi
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
- cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-
-done
-
-
-
-for ac_func in fork vfork
-do
-as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-{ echo "$as_me:$LINENO: checking for $ac_func" >&5
-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; }
-if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
- For example, HP-UX 11i <limits.h> declares gettimeofday. */
-#define $ac_func innocuous_$ac_func
-
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char $ac_func (); below.
- Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- <limits.h> exists even on freestanding compilers. */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef $ac_func
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char $ac_func ();
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined __stub_$ac_func || defined __stub___$ac_func
-choke me
-#endif
-
-int
-main ()
-{
-return $ac_func ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext &&
- $as_test_x conftest$ac_exeext; then
- eval "$as_ac_var=yes"
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- eval "$as_ac_var=no"
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
-fi
-ac_res=`eval echo '${'$as_ac_var'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-if test `eval echo '${'$as_ac_var'}'` = yes; then
- cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-done
-
-if test "x$ac_cv_func_fork" = xyes; then
- { echo "$as_me:$LINENO: checking for working fork" >&5
-echo $ECHO_N "checking for working fork... $ECHO_C" >&6; }
-if test "${ac_cv_func_fork_works+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test "$cross_compiling" = yes; then
- ac_cv_func_fork_works=cross
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-int
-main ()
-{
-
- /* By Ruediger Kuhlmann. */
- return fork () < 0;
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_func_fork_works=yes
-else
- echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
-ac_cv_func_fork_works=no
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-
-
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_func_fork_works" >&5
-echo "${ECHO_T}$ac_cv_func_fork_works" >&6; }
-
-else
- ac_cv_func_fork_works=$ac_cv_func_fork
-fi
-if test "x$ac_cv_func_fork_works" = xcross; then
- case $host in
- *-*-amigaos* | *-*-msdosdjgpp*)
- # Override, as these systems have only a dummy fork() stub
- ac_cv_func_fork_works=no
- ;;
- *)
- ac_cv_func_fork_works=yes
- ;;
- esac
- { echo "$as_me:$LINENO: WARNING: result $ac_cv_func_fork_works guessed because of cross compilation" >&5
-echo "$as_me: WARNING: result $ac_cv_func_fork_works guessed because of cross compilation" >&2;}
-fi
-ac_cv_func_vfork_works=$ac_cv_func_vfork
-if test "x$ac_cv_func_vfork" = xyes; then
- { echo "$as_me:$LINENO: checking for working vfork" >&5
-echo $ECHO_N "checking for working vfork... $ECHO_C" >&6; }
-if test "${ac_cv_func_vfork_works+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test "$cross_compiling" = yes; then
- ac_cv_func_vfork_works=cross
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-/* Thanks to Paul Eggert for this test. */
-$ac_includes_default
-#include <sys/wait.h>
-#ifdef HAVE_VFORK_H
-# include <vfork.h>
-#endif
-/* On some sparc systems, changes by the child to local and incoming
- argument registers are propagated back to the parent. The compiler
- is told about this with #include <vfork.h>, but some compilers
- (e.g. gcc -O) don't grok <vfork.h>. Test for this by using a
- static variable whose address is put into a register that is
- clobbered by the vfork. */
-static void
-#ifdef __cplusplus
-sparc_address_test (int arg)
-# else
-sparc_address_test (arg) int arg;
-#endif
-{
- static pid_t child;
- if (!child) {
- child = vfork ();
- if (child < 0) {
- perror ("vfork");
- _exit(2);
- }
- if (!child) {
- arg = getpid();
- write(-1, "", 0);
- _exit (arg);
- }
- }
-}
-
-int
-main ()
-{
- pid_t parent = getpid ();
- pid_t child;
-
- sparc_address_test (0);
-
- child = vfork ();
-
- if (child == 0) {
- /* Here is another test for sparc vfork register problems. This
- test uses lots of local variables, at least as many local
- variables as main has allocated so far including compiler
- temporaries. 4 locals are enough for gcc 1.40.3 on a Solaris
- 4.1.3 sparc, but we use 8 to be safe. A buggy compiler should
- reuse the register of parent for one of the local variables,
- since it will think that parent can't possibly be used any more
- in this routine. Assigning to the local variable will thus
- munge parent in the parent process. */
- pid_t
- p = getpid(), p1 = getpid(), p2 = getpid(), p3 = getpid(),
- p4 = getpid(), p5 = getpid(), p6 = getpid(), p7 = getpid();
- /* Convince the compiler that p..p7 are live; otherwise, it might
- use the same hardware register for all 8 local variables. */
- if (p != p1 || p != p2 || p != p3 || p != p4
- || p != p5 || p != p6 || p != p7)
- _exit(1);
-
- /* On some systems (e.g. IRIX 3.3), vfork doesn't separate parent
- from child file descriptors. If the child closes a descriptor
- before it execs or exits, this munges the parent's descriptor
- as well. Test for this by closing stdout in the child. */
- _exit(close(fileno(stdout)) != 0);
- } else {
- int status;
- struct stat st;
-
- while (wait(&status) != child)
- ;
- return (
- /* Was there some problem with vforking? */
- child < 0
-
- /* Did the child fail? (This shouldn't happen.) */
- || status
-
- /* Did the vfork/compiler bug occur? */
- || parent != getpid()
-
- /* Did the file descriptor bug occur? */
- || fstat(fileno(stdout), &st) != 0
- );
- }
-}
-_ACEOF
-rm -f conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_func_vfork_works=yes
-else
- echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
-ac_cv_func_vfork_works=no
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-
-
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_func_vfork_works" >&5
-echo "${ECHO_T}$ac_cv_func_vfork_works" >&6; }
-
-fi;
-if test "x$ac_cv_func_fork_works" = xcross; then
- ac_cv_func_vfork_works=$ac_cv_func_vfork
- { echo "$as_me:$LINENO: WARNING: result $ac_cv_func_vfork_works guessed because of cross compilation" >&5
-echo "$as_me: WARNING: result $ac_cv_func_vfork_works guessed because of cross compilation" >&2;}
-fi
-
-if test "x$ac_cv_func_vfork_works" = xyes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_WORKING_VFORK 1
-_ACEOF
-
-else
-
-cat >>confdefs.h <<\_ACEOF
-#define vfork fork
-_ACEOF
-
-fi
-if test "x$ac_cv_func_fork_works" = xyes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_WORKING_FORK 1
-_ACEOF
-
-fi
-
-
-for ac_header in stdlib.h
-do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- { echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-else
- # Is the header compilable?
-{ echo "$as_me:$LINENO: checking $ac_header usability" >&5
-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_header_compiler=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_header_compiler=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-echo "${ECHO_T}$ac_header_compiler" >&6; }
-
-# Is the header present?
-{ echo "$as_me:$LINENO: checking $ac_header presence" >&5
-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <$ac_header>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null && {
- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
- test ! -s conftest.err
- }; then
- ac_header_preproc=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_header_preproc=no
-fi
-
-rm -f conftest.err conftest.$ac_ext
-{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-echo "${ECHO_T}$ac_header_preproc" >&6; }
-
-# So? What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
- yes:no: )
- { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
- ac_header_preproc=yes
- ;;
- no:yes:* )
- { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
-echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
-echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
- ( cat <<\_ASBOX
-## ----------------------------------------------- ##
-## Report this to trustedbsd-audit at TrustesdBSD.org ##
-## ----------------------------------------------- ##
-_ASBOX
- ) | sed "s/^/$as_me: WARNING: /" >&2
- ;;
-esac
-{ echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- eval "$as_ac_Header=\$ac_header_preproc"
-fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-
-fi
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
- cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-
-done
-
-{ echo "$as_me:$LINENO: checking for GNU libc compatible malloc" >&5
-echo $ECHO_N "checking for GNU libc compatible malloc... $ECHO_C" >&6; }
-if test "${ac_cv_func_malloc_0_nonnull+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test "$cross_compiling" = yes; then
- ac_cv_func_malloc_0_nonnull=no
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#if defined STDC_HEADERS || defined HAVE_STDLIB_H
-# include <stdlib.h>
-#else
-char *malloc ();
-#endif
-
-int
-main ()
-{
-return ! malloc (0);
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_func_malloc_0_nonnull=yes
-else
- echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
-ac_cv_func_malloc_0_nonnull=no
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-
-
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_func_malloc_0_nonnull" >&5
-echo "${ECHO_T}$ac_cv_func_malloc_0_nonnull" >&6; }
-if test $ac_cv_func_malloc_0_nonnull = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_MALLOC 1
-_ACEOF
-
-else
- cat >>confdefs.h <<\_ACEOF
-#define HAVE_MALLOC 0
-_ACEOF
-
- case " $LIBOBJS " in
- *" malloc.$ac_objext "* ) ;;
- *) LIBOBJS="$LIBOBJS malloc.$ac_objext"
- ;;
-esac
-
-
-cat >>confdefs.h <<\_ACEOF
-#define malloc rpl_malloc
-_ACEOF
-
-fi
-
-
-
-
-
-
-
-for ac_header in $ac_header_list
-do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- { echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-else
- # Is the header compilable?
-{ echo "$as_me:$LINENO: checking $ac_header usability" >&5
-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_header_compiler=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_header_compiler=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-echo "${ECHO_T}$ac_header_compiler" >&6; }
-
-# Is the header present?
-{ echo "$as_me:$LINENO: checking $ac_header presence" >&5
-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <$ac_header>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null && {
- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
- test ! -s conftest.err
- }; then
- ac_header_preproc=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_header_preproc=no
-fi
-
-rm -f conftest.err conftest.$ac_ext
-{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-echo "${ECHO_T}$ac_header_preproc" >&6; }
-
-# So? What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
- yes:no: )
- { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
- ac_header_preproc=yes
- ;;
- no:yes:* )
- { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
-echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
-echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
- ( cat <<\_ASBOX
-## ----------------------------------------------- ##
-## Report this to trustedbsd-audit at TrustesdBSD.org ##
-## ----------------------------------------------- ##
-_ASBOX
- ) | sed "s/^/$as_me: WARNING: /" >&2
- ;;
-esac
-{ echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- eval "$as_ac_Header=\$ac_header_preproc"
-fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-
-fi
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
- cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-
-done
-
-
-
-
-
-
-
-
-
-for ac_func in $ac_func_list
-do
-as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-{ echo "$as_me:$LINENO: checking for $ac_func" >&5
-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; }
-if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
- For example, HP-UX 11i <limits.h> declares gettimeofday. */
-#define $ac_func innocuous_$ac_func
-
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char $ac_func (); below.
- Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- <limits.h> exists even on freestanding compilers. */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef $ac_func
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char $ac_func ();
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined __stub_$ac_func || defined __stub___$ac_func
-choke me
-#endif
-
-int
-main ()
-{
-return $ac_func ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext &&
- $as_test_x conftest$ac_exeext; then
- eval "$as_ac_var=yes"
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- eval "$as_ac_var=no"
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
-fi
-ac_res=`eval echo '${'$as_ac_var'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-if test `eval echo '${'$as_ac_var'}'` = yes; then
- cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-done
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-{ echo "$as_me:$LINENO: checking for working mktime" >&5
-echo $ECHO_N "checking for working mktime... $ECHO_C" >&6; }
-if test "${ac_cv_func_working_mktime+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test "$cross_compiling" = yes; then
- ac_cv_func_working_mktime=no
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-/* Test program from Paul Eggert and Tony Leneis. */
-#ifdef TIME_WITH_SYS_TIME
-# include <sys/time.h>
-# include <time.h>
-#else
-# ifdef HAVE_SYS_TIME_H
-# include <sys/time.h>
-# else
-# include <time.h>
-# endif
-#endif
-
-#include <stdlib.h>
-
-#ifdef HAVE_UNISTD_H
-# include <unistd.h>
-#endif
-
-#ifndef HAVE_ALARM
-# define alarm(X) /* empty */
-#endif
-
-/* Work around redefinition to rpl_putenv by other config tests. */
-#undef putenv
-
-static time_t time_t_max;
-static time_t time_t_min;
-
-/* Values we'll use to set the TZ environment variable. */
-static char *tz_strings[] = {
- (char *) 0, "TZ=GMT0", "TZ=JST-9",
- "TZ=EST+3EDT+2,M10.1.0/00:00:00,M2.3.0/00:00:00"
-};
-#define N_STRINGS (sizeof (tz_strings) / sizeof (tz_strings[0]))
-
-/* Return 0 if mktime fails to convert a date in the spring-forward gap.
- Based on a problem report from Andreas Jaeger. */
-static int
-spring_forward_gap ()
-{
- /* glibc (up to about 1998-10-07) failed this test. */
- struct tm tm;
-
- /* Use the portable POSIX.1 specification "TZ=PST8PDT,M4.1.0,M10.5.0"
- instead of "TZ=America/Vancouver" in order to detect the bug even
- on systems that don't support the Olson extension, or don't have the
- full zoneinfo tables installed. */
- putenv ("TZ=PST8PDT,M4.1.0,M10.5.0");
-
- tm.tm_year = 98;
- tm.tm_mon = 3;
- tm.tm_mday = 5;
- tm.tm_hour = 2;
- tm.tm_min = 0;
- tm.tm_sec = 0;
- tm.tm_isdst = -1;
- return mktime (&tm) != (time_t) -1;
-}
-
-static int
-mktime_test1 (now)
- time_t now;
-{
- struct tm *lt;
- return ! (lt = localtime (&now)) || mktime (lt) == now;
-}
-
-static int
-mktime_test (now)
- time_t now;
-{
- return (mktime_test1 (now)
- && mktime_test1 ((time_t) (time_t_max - now))
- && mktime_test1 ((time_t) (time_t_min + now)));
-}
-
-static int
-irix_6_4_bug ()
-{
- /* Based on code from Ariel Faigon. */
- struct tm tm;
- tm.tm_year = 96;
- tm.tm_mon = 3;
- tm.tm_mday = 0;
- tm.tm_hour = 0;
- tm.tm_min = 0;
- tm.tm_sec = 0;
- tm.tm_isdst = -1;
- mktime (&tm);
- return tm.tm_mon == 2 && tm.tm_mday == 31;
-}
-
-static int
-bigtime_test (j)
- int j;
-{
- struct tm tm;
- time_t now;
- tm.tm_year = tm.tm_mon = tm.tm_mday = tm.tm_hour = tm.tm_min = tm.tm_sec = j;
- now = mktime (&tm);
- if (now != (time_t) -1)
- {
- struct tm *lt = localtime (&now);
- if (! (lt
- && lt->tm_year == tm.tm_year
- && lt->tm_mon == tm.tm_mon
- && lt->tm_mday == tm.tm_mday
- && lt->tm_hour == tm.tm_hour
- && lt->tm_min == tm.tm_min
- && lt->tm_sec == tm.tm_sec
- && lt->tm_yday == tm.tm_yday
- && lt->tm_wday == tm.tm_wday
- && ((lt->tm_isdst < 0 ? -1 : 0 < lt->tm_isdst)
- == (tm.tm_isdst < 0 ? -1 : 0 < tm.tm_isdst))))
- return 0;
- }
- return 1;
-}
-
-static int
-year_2050_test ()
-{
- /* The correct answer for 2050-02-01 00:00:00 in Pacific time,
- ignoring leap seconds. */
- unsigned long int answer = 2527315200UL;
-
- struct tm tm;
- time_t t;
- tm.tm_year = 2050 - 1900;
- tm.tm_mon = 2 - 1;
- tm.tm_mday = 1;
- tm.tm_hour = tm.tm_min = tm.tm_sec = 0;
- tm.tm_isdst = -1;
-
- /* Use the portable POSIX.1 specification "TZ=PST8PDT,M4.1.0,M10.5.0"
- instead of "TZ=America/Vancouver" in order to detect the bug even
- on systems that don't support the Olson extension, or don't have the
- full zoneinfo tables installed. */
- putenv ("TZ=PST8PDT,M4.1.0,M10.5.0");
-
- t = mktime (&tm);
-
- /* Check that the result is either a failure, or close enough
- to the correct answer that we can assume the discrepancy is
- due to leap seconds. */
- return (t == (time_t) -1
- || (0 < t && answer - 120 <= t && t <= answer + 120));
-}
-
-int
-main ()
-{
- time_t t, delta;
- int i, j;
-
- /* This test makes some buggy mktime implementations loop.
- Give up after 60 seconds; a mktime slower than that
- isn't worth using anyway. */
- alarm (60);
-
- for (time_t_max = 1; 0 < time_t_max; time_t_max *= 2)
- continue;
- time_t_max--;
- if ((time_t) -1 < 0)
- for (time_t_min = -1; (time_t) (time_t_min * 2) < 0; time_t_min *= 2)
- continue;
- delta = time_t_max / 997; /* a suitable prime number */
- for (i = 0; i < N_STRINGS; i++)
- {
- if (tz_strings[i])
- putenv (tz_strings[i]);
-
- for (t = 0; t <= time_t_max - delta; t += delta)
- if (! mktime_test (t))
- return 1;
- if (! (mktime_test ((time_t) 1)
- && mktime_test ((time_t) (60 * 60))
- && mktime_test ((time_t) (60 * 60 * 24))))
- return 1;
-
- for (j = 1; 0 < j; j *= 2)
- if (! bigtime_test (j))
- return 1;
- if (! bigtime_test (j - 1))
- return 1;
- }
- return ! (irix_6_4_bug () && spring_forward_gap () && year_2050_test ());
-}
-_ACEOF
-rm -f conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_func_working_mktime=yes
-else
- echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
-ac_cv_func_working_mktime=no
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-
-
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_func_working_mktime" >&5
-echo "${ECHO_T}$ac_cv_func_working_mktime" >&6; }
-if test $ac_cv_func_working_mktime = no; then
- case " $LIBOBJS " in
- *" mktime.$ac_objext "* ) ;;
- *) LIBOBJS="$LIBOBJS mktime.$ac_objext"
- ;;
-esac
-
-fi
-
-{ echo "$as_me:$LINENO: checking return type of signal handlers" >&5
-echo $ECHO_N "checking return type of signal handlers... $ECHO_C" >&6; }
-if test "${ac_cv_type_signal+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <sys/types.h>
-#include <signal.h>
-
-int
-main ()
-{
-return *(signal (0, 0)) (0) == 1;
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_cv_type_signal=int
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_type_signal=void
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_type_signal" >&5
-echo "${ECHO_T}$ac_cv_type_signal" >&6; }
-
-cat >>confdefs.h <<_ACEOF
-#define RETSIGTYPE $ac_cv_type_signal
-_ACEOF
-
-
-{ echo "$as_me:$LINENO: checking whether lstat dereferences a symlink specified with a trailing slash" >&5
-echo $ECHO_N "checking whether lstat dereferences a symlink specified with a trailing slash... $ECHO_C" >&6; }
-if test "${ac_cv_func_lstat_dereferences_slashed_symlink+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- rm -f conftest.sym conftest.file
-echo >conftest.file
-if test "$as_ln_s" = "ln -s" && ln -s conftest.file conftest.sym; then
- if test "$cross_compiling" = yes; then
- ac_cv_func_lstat_dereferences_slashed_symlink=no
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-int
-main ()
-{
-struct stat sbuf;
- /* Linux will dereference the symlink and fail.
- That is better in the sense that it means we will not
- have to compile and use the lstat wrapper. */
- return lstat ("conftest.sym/", &sbuf) == 0;
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_func_lstat_dereferences_slashed_symlink=yes
-else
- echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
-ac_cv_func_lstat_dereferences_slashed_symlink=no
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-
-
-else
- # If the `ln -s' command failed, then we probably don't even
- # have an lstat function.
- ac_cv_func_lstat_dereferences_slashed_symlink=no
-fi
-rm -f conftest.sym conftest.file
-
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_func_lstat_dereferences_slashed_symlink" >&5
-echo "${ECHO_T}$ac_cv_func_lstat_dereferences_slashed_symlink" >&6; }
-
-test $ac_cv_func_lstat_dereferences_slashed_symlink = yes &&
-
-cat >>confdefs.h <<_ACEOF
-#define LSTAT_FOLLOWS_SLASHED_SYMLINK 1
-_ACEOF
-
-
-if test $ac_cv_func_lstat_dereferences_slashed_symlink = no; then
- case " $LIBOBJS " in
- *" lstat.$ac_objext "* ) ;;
- *) LIBOBJS="$LIBOBJS lstat.$ac_objext"
- ;;
-esac
-
-fi
-
-{ echo "$as_me:$LINENO: checking whether stat accepts an empty string" >&5
-echo $ECHO_N "checking whether stat accepts an empty string... $ECHO_C" >&6; }
-if test "${ac_cv_func_stat_empty_string_bug+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test "$cross_compiling" = yes; then
- ac_cv_func_stat_empty_string_bug=yes
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-int
-main ()
-{
-struct stat sbuf;
- return stat ("", &sbuf) == 0;
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_func_stat_empty_string_bug=no
-else
- echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
-ac_cv_func_stat_empty_string_bug=yes
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-
-
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_func_stat_empty_string_bug" >&5
-echo "${ECHO_T}$ac_cv_func_stat_empty_string_bug" >&6; }
-if test $ac_cv_func_stat_empty_string_bug = yes; then
- case " $LIBOBJS " in
- *" stat.$ac_objext "* ) ;;
- *) LIBOBJS="$LIBOBJS stat.$ac_objext"
- ;;
-esac
-
-
-cat >>confdefs.h <<_ACEOF
-#define HAVE_STAT_EMPTY_STRING_BUG 1
-_ACEOF
-
-fi
-
-
-for ac_func in strftime
-do
-as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-{ echo "$as_me:$LINENO: checking for $ac_func" >&5
-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; }
-if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
- For example, HP-UX 11i <limits.h> declares gettimeofday. */
-#define $ac_func innocuous_$ac_func
-
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char $ac_func (); below.
- Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- <limits.h> exists even on freestanding compilers. */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef $ac_func
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char $ac_func ();
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined __stub_$ac_func || defined __stub___$ac_func
-choke me
-#endif
-
-int
-main ()
-{
-return $ac_func ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext &&
- $as_test_x conftest$ac_exeext; then
- eval "$as_ac_var=yes"
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- eval "$as_ac_var=no"
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
-fi
-ac_res=`eval echo '${'$as_ac_var'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-if test `eval echo '${'$as_ac_var'}'` = yes; then
- cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-_ACEOF
-
-else
- # strftime is in -lintl on SCO UNIX.
-{ echo "$as_me:$LINENO: checking for strftime in -lintl" >&5
-echo $ECHO_N "checking for strftime in -lintl... $ECHO_C" >&6; }
-if test "${ac_cv_lib_intl_strftime+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-lintl $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char strftime ();
-int
-main ()
-{
-return strftime ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext &&
- $as_test_x conftest$ac_exeext; then
- ac_cv_lib_intl_strftime=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_lib_intl_strftime=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_lib_intl_strftime" >&5
-echo "${ECHO_T}$ac_cv_lib_intl_strftime" >&6; }
-if test $ac_cv_lib_intl_strftime = yes; then
- cat >>confdefs.h <<\_ACEOF
-#define HAVE_STRFTIME 1
-_ACEOF
-
-LIBS="-lintl $LIBS"
-fi
-
-fi
-done
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-for ac_func in bzero clock_gettime ftruncate gettimeofday inet_ntoa memset strchr strerror strlcat strrchr strstr strtol strtoul
-do
-as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-{ echo "$as_me:$LINENO: checking for $ac_func" >&5
-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; }
-if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
- For example, HP-UX 11i <limits.h> declares gettimeofday. */
-#define $ac_func innocuous_$ac_func
-
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char $ac_func (); below.
- Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- <limits.h> exists even on freestanding compilers. */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef $ac_func
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char $ac_func ();
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined __stub_$ac_func || defined __stub___$ac_func
-choke me
-#endif
-
-int
-main ()
-{
-return $ac_func ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext &&
- $as_test_x conftest$ac_exeext; then
- eval "$as_ac_var=yes"
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- eval "$as_ac_var=no"
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
-fi
-ac_res=`eval echo '${'$as_ac_var'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-if test `eval echo '${'$as_ac_var'}'` = yes; then
- cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-done
-
-
-# sys/queue.h exists on most systems, but its capabilities vary a great deal.
-# test for LIST_FIRST and TAILQ_FOREACH_SAFE, which appears to not exist in
-# all of them, and are necessary for OpenBSM.
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
- #include <sys/queue.h>
-
-int
-main ()
-{
-
-
- #ifndef LIST_FIRST
- #error LIST_FIRST missing
- #endif
- #ifndef TAILQ_FOREACH_SAFE
- #error TAILQ_FOREACH_SAFE
- #endif
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext &&
- $as_test_x conftest$ac_exeext; then
-
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_FULL_QUEUE_H
-_ACEOF
-
-
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
-
-# Systems may not define key audit system calls, in which case libbsm cannot
-# depend on them or it will generate link-time or run-time errors. Test for
-# just one.
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
- #include <stdlib.h>
-
- extern int auditon(int, void *, int);
-
-int
-main ()
-{
-
- int err;
-
- err = auditon(0, NULL, 0);
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext &&
- $as_test_x conftest$ac_exeext; then
-
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_AUDIT_SYSCALLS
-_ACEOF
-
-have_audit_syscalls=true
-
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-have_audit_syscalls=false
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
- if $have_audit_syscalls; then
- HAVE_AUDIT_SYSCALLS_TRUE=
- HAVE_AUDIT_SYSCALLS_FALSE='#'
-else
- HAVE_AUDIT_SYSCALLS_TRUE='#'
- HAVE_AUDIT_SYSCALLS_FALSE=
-fi
-
-
-ac_config_files="$ac_config_files Makefile bin/Makefile bin/audit/Makefile bin/auditd/Makefile bin/auditfilterd/Makefile bin/auditreduce/Makefile bin/praudit/Makefile bsm/Makefile libbsm/Makefile modules/Makefile modules/auditfilter_noop/Makefile man/Makefile test/Makefile test/bsm/Makefile tools/Makefile"
-
-
-cat >confcache <<\_ACEOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs, see configure's option --config-cache.
-# It is not useful on other systems. If it contains results you don't
-# want to keep, you may remove or edit it.
-#
-# config.status only pays attention to the cache file if you give it
-# the --recheck option to rerun configure.
-#
-# `ac_cv_env_foo' variables (set or unset) will be overridden when
-# loading this file, other *unset* `ac_cv_foo' will be assigned the
-# following values.
-
-_ACEOF
-
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, we kill variables containing newlines.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(
- for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
- eval ac_val=\$$ac_var
- case $ac_val in #(
- *${as_nl}*)
- case $ac_var in #(
- *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
-echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
- esac
- case $ac_var in #(
- _ | IFS | as_nl) ;; #(
- *) $as_unset $ac_var ;;
- esac ;;
- esac
- done
-
- (set) 2>&1 |
- case $as_nl`(ac_space=' '; set) 2>&1` in #(
- *${as_nl}ac_space=\ *)
- # `set' does not quote correctly, so add quotes (double-quote
- # substitution turns \\\\ into \\, and sed turns \\ into \).
- sed -n \
- "s/'/'\\\\''/g;
- s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
- ;; #(
- *)
- # `set' quotes correctly as required by POSIX, so do not add quotes.
- sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
- ;;
- esac |
- sort
-) |
- sed '
- /^ac_cv_env_/b end
- t clear
- :clear
- s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
- t end
- s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
- :end' >>confcache
-if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
- if test -w "$cache_file"; then
- test "x$cache_file" != "x/dev/null" &&
- { echo "$as_me:$LINENO: updating cache $cache_file" >&5
-echo "$as_me: updating cache $cache_file" >&6;}
- cat confcache >$cache_file
- else
- { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5
-echo "$as_me: not updating unwritable cache $cache_file" >&6;}
- fi
-fi
-rm -f confcache
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-DEFS=-DHAVE_CONFIG_H
-
-ac_libobjs=
-ac_ltlibobjs=
-for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
- # 1. Remove the extension, and $U if already installed.
- ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
- ac_i=`echo "$ac_i" | sed "$ac_script"`
- # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR
- # will be set to the directory where LIBOBJS objects are built.
- ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext"
- ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo'
-done
-LIBOBJS=$ac_libobjs
-
-LTLIBOBJS=$ac_ltlibobjs
-
-
-if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then
- { { echo "$as_me:$LINENO: error: conditional \"MAINTAINER_MODE\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-echo "$as_me: error: conditional \"MAINTAINER_MODE\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
- { { echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-echo "$as_me: error: conditional \"AMDEP\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
- { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-echo "$as_me: error: conditional \"am__fastdepCC\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then
- { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCXX\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-echo "$as_me: error: conditional \"am__fastdepCXX\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-if test -z "${HAVE_AUDIT_SYSCALLS_TRUE}" && test -z "${HAVE_AUDIT_SYSCALLS_FALSE}"; then
- { { echo "$as_me:$LINENO: error: conditional \"HAVE_AUDIT_SYSCALLS\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-echo "$as_me: error: conditional \"HAVE_AUDIT_SYSCALLS\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-: ${CONFIG_STATUS=./config.status}
-ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files $CONFIG_STATUS"
-{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
-echo "$as_me: creating $CONFIG_STATUS" >&6;}
-cat >$CONFIG_STATUS <<_ACEOF
-#! $SHELL
-# Generated by $as_me.
-# Run this file to recreate the current configuration.
-# Compiler output produced by configure, useful for debugging
-# configure, is in config.log if it exists.
-
-debug=false
-ac_cs_recheck=false
-ac_cs_silent=false
-SHELL=\${CONFIG_SHELL-$SHELL}
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-## --------------------- ##
-## M4sh Initialization. ##
-## --------------------- ##
-
-# Be more Bourne compatible
-DUALCASE=1; export DUALCASE # for MKS sh
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
- emulate sh
- NULLCMD=:
- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
- setopt NO_GLOB_SUBST
-else
- case `(set -o) 2>/dev/null` in
- *posix*) set -o posix ;;
-esac
-
-fi
-
-
-
-
-# PATH needs CR
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- echo "#! /bin/sh" >conf$$.sh
- echo "exit 0" >>conf$$.sh
- chmod +x conf$$.sh
- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
- PATH_SEPARATOR=';'
- else
- PATH_SEPARATOR=:
- fi
- rm -f conf$$.sh
-fi
-
-# Support unset when possible.
-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
- as_unset=unset
-else
- as_unset=false
-fi
-
-
-# IFS
-# We need space, tab and new line, in precisely that order. Quoting is
-# there to prevent editors from complaining about space-tab.
-# (If _AS_PATH_WALK were called with IFS unset, it would disable word
-# splitting by setting IFS to empty value.)
-as_nl='
-'
-IFS=" "" $as_nl"
-
-# Find who we are. Look in the path if we contain no directory separator.
-case $0 in
- *[\\/]* ) as_myself=$0 ;;
- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
-IFS=$as_save_IFS
-
- ;;
-esac
-# We did not find ourselves, most probably we were run as `sh COMMAND'
-# in which case we are not to be found in the path.
-if test "x$as_myself" = x; then
- as_myself=$0
-fi
-if test ! -f "$as_myself"; then
- echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
- { (exit 1); exit 1; }
-fi
-
-# Work around bugs in pre-3.0 UWIN ksh.
-for as_var in ENV MAIL MAILPATH
-do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-done
-PS1='$ '
-PS2='> '
-PS4='+ '
-
-# NLS nuisances.
-for as_var in \
- LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
- LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
- LC_TELEPHONE LC_TIME
-do
- if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
- eval $as_var=C; export $as_var
- else
- ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
- fi
-done
-
-# Required to use basename.
-if expr a : '\(a\)' >/dev/null 2>&1 &&
- test "X`expr 00001 : '.*\(...\)'`" = X001; then
- as_expr=expr
-else
- as_expr=false
-fi
-
-if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
- as_basename=basename
-else
- as_basename=false
-fi
-
-
-# Name of the executable.
-as_me=`$as_basename -- "$0" ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
- X"$0" : 'X\(//\)$' \| \
- X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-echo X/"$0" |
- sed '/^.*\/\([^/][^/]*\)\/*$/{
- s//\1/
- q
- }
- /^X\/\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\/\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
-
-# CDPATH.
-$as_unset CDPATH
-
-
-
- as_lineno_1=$LINENO
- as_lineno_2=$LINENO
- test "x$as_lineno_1" != "x$as_lineno_2" &&
- test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
-
- # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
- # uniformly replaced by the line number. The first 'sed' inserts a
- # line-number line after each line using $LINENO; the second 'sed'
- # does the real work. The second script uses 'N' to pair each
- # line-number line with the line containing $LINENO, and appends
- # trailing '-' during substitution so that $LINENO is not a special
- # case at line end.
- # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
- # scripts with optimization help from Paolo Bonzini. Blame Lee
- # E. McMahon (1931-1989) for sed's syntax. :-)
- sed -n '
- p
- /[$]LINENO/=
- ' <$as_myself |
- sed '
- s/[$]LINENO.*/&-/
- t lineno
- b
- :lineno
- N
- :loop
- s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
- t loop
- s/-\n.*//
- ' >$as_me.lineno &&
- chmod +x "$as_me.lineno" ||
- { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
- { (exit 1); exit 1; }; }
-
- # Don't try to exec as it changes $[0], causing all sort of problems
- # (the dirname of $[0] is not the place where we might find the
- # original and so on. Autoconf is especially sensitive to this).
- . "./$as_me.lineno"
- # Exit status is that of the last command.
- exit
-}
-
-
-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
- as_dirname=dirname
-else
- as_dirname=false
-fi
-
-ECHO_C= ECHO_N= ECHO_T=
-case `echo -n x` in
--n*)
- case `echo 'x\c'` in
- *c*) ECHO_T=' ';; # ECHO_T is single tab character.
- *) ECHO_C='\c';;
- esac;;
-*)
- ECHO_N='-n';;
-esac
-
-if expr a : '\(a\)' >/dev/null 2>&1 &&
- test "X`expr 00001 : '.*\(...\)'`" = X001; then
- as_expr=expr
-else
- as_expr=false
-fi
-
-rm -f conf$$ conf$$.exe conf$$.file
-if test -d conf$$.dir; then
- rm -f conf$$.dir/conf$$.file
-else
- rm -f conf$$.dir
- mkdir conf$$.dir
-fi
-echo >conf$$.file
-if ln -s conf$$.file conf$$ 2>/dev/null; then
- as_ln_s='ln -s'
- # ... but there are two gotchas:
- # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
- # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
- # In both cases, we have to default to `cp -p'.
- ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
- as_ln_s='cp -p'
-elif ln conf$$.file conf$$ 2>/dev/null; then
- as_ln_s=ln
-else
- as_ln_s='cp -p'
-fi
-rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
-rmdir conf$$.dir 2>/dev/null
-
-if mkdir -p . 2>/dev/null; then
- as_mkdir_p=:
-else
- test -d ./-p && rmdir ./-p
- as_mkdir_p=false
-fi
-
-if test -x / >/dev/null 2>&1; then
- as_test_x='test -x'
-else
- if ls -dL / >/dev/null 2>&1; then
- as_ls_L_option=L
- else
- as_ls_L_option=
- fi
- as_test_x='
- eval sh -c '\''
- if test -d "$1"; then
- test -d "$1/.";
- else
- case $1 in
- -*)set "./$1";;
- esac;
- case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
- ???[sx]*):;;*)false;;esac;fi
- '\'' sh
- '
-fi
-as_executable_p=$as_test_x
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
-
-exec 6>&1
-
-# Save the log message, to keep $[0] and so on meaningful, and to
-# report actual input values of CONFIG_FILES etc. instead of their
-# values after options handling.
-ac_log="
-This file was extended by OpenBSM $as_me 1.0, which was
-generated by GNU Autoconf 2.61. Invocation command line was
-
- CONFIG_FILES = $CONFIG_FILES
- CONFIG_HEADERS = $CONFIG_HEADERS
- CONFIG_LINKS = $CONFIG_LINKS
- CONFIG_COMMANDS = $CONFIG_COMMANDS
- $ $0 $@
-
-on `(hostname || uname -n) 2>/dev/null | sed 1q`
-"
-
-_ACEOF
-
-cat >>$CONFIG_STATUS <<_ACEOF
-# Files that config.status was made for.
-config_files="$ac_config_files"
-config_headers="$ac_config_headers"
-config_commands="$ac_config_commands"
-
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-ac_cs_usage="\
-\`$as_me' instantiates files from templates according to the
-current configuration.
-
-Usage: $0 [OPTIONS] [FILE]...
-
- -h, --help print this help, then exit
- -V, --version print version number and configuration settings, then exit
- -q, --quiet do not print progress messages
- -d, --debug don't remove temporary files
- --recheck update $as_me by reconfiguring in the same conditions
- --file=FILE[:TEMPLATE]
- instantiate the configuration file FILE
- --header=FILE[:TEMPLATE]
- instantiate the configuration header FILE
-
-Configuration files:
-$config_files
-
-Configuration headers:
-$config_headers
-
-Configuration commands:
-$config_commands
-
-Report bugs to <bug-autoconf at gnu.org>."
-
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
-ac_cs_version="\\
-OpenBSM config.status 1.0
-configured by $0, generated by GNU Autoconf 2.61,
- with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
-
-Copyright (C) 2006 Free Software Foundation, Inc.
-This config.status script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it."
-
-ac_pwd='$ac_pwd'
-srcdir='$srcdir'
-INSTALL='$INSTALL'
-MKDIR_P='$MKDIR_P'
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-# If no file are specified by the user, then we need to provide default
-# value. By we need to know if files were specified by the user.
-ac_need_defaults=:
-while test $# != 0
-do
- case $1 in
- --*=*)
- ac_option=`expr "X$1" : 'X\([^=]*\)='`
- ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
- ac_shift=:
- ;;
- *)
- ac_option=$1
- ac_optarg=$2
- ac_shift=shift
- ;;
- esac
-
- case $ac_option in
- # Handling of the options.
- -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
- ac_cs_recheck=: ;;
- --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
- echo "$ac_cs_version"; exit ;;
- --debug | --debu | --deb | --de | --d | -d )
- debug=: ;;
- --file | --fil | --fi | --f )
- $ac_shift
- CONFIG_FILES="$CONFIG_FILES $ac_optarg"
- ac_need_defaults=false;;
- --header | --heade | --head | --hea )
- $ac_shift
- CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
- ac_need_defaults=false;;
- --he | --h)
- # Conflict between --help and --header
- { echo "$as_me: error: ambiguous option: $1
-Try \`$0 --help' for more information." >&2
- { (exit 1); exit 1; }; };;
- --help | --hel | -h )
- echo "$ac_cs_usage"; exit ;;
- -q | -quiet | --quiet | --quie | --qui | --qu | --q \
- | -silent | --silent | --silen | --sile | --sil | --si | --s)
- ac_cs_silent=: ;;
-
- # This is an error.
- -*) { echo "$as_me: error: unrecognized option: $1
-Try \`$0 --help' for more information." >&2
- { (exit 1); exit 1; }; } ;;
-
- *) ac_config_targets="$ac_config_targets $1"
- ac_need_defaults=false ;;
-
- esac
- shift
-done
-
-ac_configure_extra_args=
-
-if $ac_cs_silent; then
- exec 6>/dev/null
- ac_configure_extra_args="$ac_configure_extra_args --silent"
-fi
-
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
-if \$ac_cs_recheck; then
- echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
- CONFIG_SHELL=$SHELL
- export CONFIG_SHELL
- exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
-fi
-
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
-exec 5>>config.log
-{
- echo
- sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
-## Running $as_me. ##
-_ASBOX
- echo "$ac_log"
-} >&5
-
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
-#
-# INIT-COMMANDS
-#
-AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
-
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-
-# Handling of arguments.
-for ac_config_target in $ac_config_targets
-do
- case $ac_config_target in
- "config/config.h") CONFIG_HEADERS="$CONFIG_HEADERS config/config.h" ;;
- "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
- "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
- "bin/Makefile") CONFIG_FILES="$CONFIG_FILES bin/Makefile" ;;
- "bin/audit/Makefile") CONFIG_FILES="$CONFIG_FILES bin/audit/Makefile" ;;
- "bin/auditd/Makefile") CONFIG_FILES="$CONFIG_FILES bin/auditd/Makefile" ;;
- "bin/auditfilterd/Makefile") CONFIG_FILES="$CONFIG_FILES bin/auditfilterd/Makefile" ;;
- "bin/auditreduce/Makefile") CONFIG_FILES="$CONFIG_FILES bin/auditreduce/Makefile" ;;
- "bin/praudit/Makefile") CONFIG_FILES="$CONFIG_FILES bin/praudit/Makefile" ;;
- "bsm/Makefile") CONFIG_FILES="$CONFIG_FILES bsm/Makefile" ;;
- "libbsm/Makefile") CONFIG_FILES="$CONFIG_FILES libbsm/Makefile" ;;
- "modules/Makefile") CONFIG_FILES="$CONFIG_FILES modules/Makefile" ;;
- "modules/auditfilter_noop/Makefile") CONFIG_FILES="$CONFIG_FILES modules/auditfilter_noop/Makefile" ;;
- "man/Makefile") CONFIG_FILES="$CONFIG_FILES man/Makefile" ;;
- "test/Makefile") CONFIG_FILES="$CONFIG_FILES test/Makefile" ;;
- "test/bsm/Makefile") CONFIG_FILES="$CONFIG_FILES test/bsm/Makefile" ;;
- "tools/Makefile") CONFIG_FILES="$CONFIG_FILES tools/Makefile" ;;
-
- *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
-echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
- { (exit 1); exit 1; }; };;
- esac
-done
-
-
-# If the user did not use the arguments to specify the items to instantiate,
-# then the envvar interface is used. Set only those that are not.
-# We use the long form for the default assignment because of an extremely
-# bizarre bug on SunOS 4.1.3.
-if $ac_need_defaults; then
- test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
- test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
- test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
-fi
-
-# Have a temporary directory for convenience. Make it in the build tree
-# simply because there is no reason against having it here, and in addition,
-# creating and moving files from /tmp can sometimes cause problems.
-# Hook for its removal unless debugging.
-# Note that there is a small window in which the directory will not be cleaned:
-# after its creation but before its name has been assigned to `$tmp'.
-$debug ||
-{
- tmp=
- trap 'exit_status=$?
- { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status
-' 0
- trap '{ (exit 1); exit 1; }' 1 2 13 15
-}
-# Create a (secure) tmp directory for tmp files.
-
-{
- tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
- test -n "$tmp" && test -d "$tmp"
-} ||
-{
- tmp=./conf$$-$RANDOM
- (umask 077 && mkdir "$tmp")
-} ||
-{
- echo "$me: cannot create a temporary directory in ." >&2
- { (exit 1); exit 1; }
-}
-
-#
-# Set up the sed scripts for CONFIG_FILES section.
-#
-
-# No need to generate the scripts if there are no CONFIG_FILES.
-# This happens for instance when ./config.status config.h
-if test -n "$CONFIG_FILES"; then
-
-_ACEOF
-
-
-
-ac_delim='%!_!# '
-for ac_last_try in false false false false false :; do
- cat >conf$$subs.sed <<_ACEOF
-SHELL!$SHELL$ac_delim
-PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim
-PACKAGE_NAME!$PACKAGE_NAME$ac_delim
-PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim
-PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim
-PACKAGE_STRING!$PACKAGE_STRING$ac_delim
-PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim
-exec_prefix!$exec_prefix$ac_delim
-prefix!$prefix$ac_delim
-program_transform_name!$program_transform_name$ac_delim
-bindir!$bindir$ac_delim
-sbindir!$sbindir$ac_delim
-libexecdir!$libexecdir$ac_delim
-datarootdir!$datarootdir$ac_delim
-datadir!$datadir$ac_delim
-sysconfdir!$sysconfdir$ac_delim
-sharedstatedir!$sharedstatedir$ac_delim
-localstatedir!$localstatedir$ac_delim
-includedir!$includedir$ac_delim
-oldincludedir!$oldincludedir$ac_delim
-docdir!$docdir$ac_delim
-infodir!$infodir$ac_delim
-htmldir!$htmldir$ac_delim
-dvidir!$dvidir$ac_delim
-pdfdir!$pdfdir$ac_delim
-psdir!$psdir$ac_delim
-libdir!$libdir$ac_delim
-localedir!$localedir$ac_delim
-mandir!$mandir$ac_delim
-DEFS!$DEFS$ac_delim
-ECHO_C!$ECHO_C$ac_delim
-ECHO_N!$ECHO_N$ac_delim
-ECHO_T!$ECHO_T$ac_delim
-LIBS!$LIBS$ac_delim
-build_alias!$build_alias$ac_delim
-host_alias!$host_alias$ac_delim
-target_alias!$target_alias$ac_delim
-MAINTAINER_MODE_TRUE!$MAINTAINER_MODE_TRUE$ac_delim
-MAINTAINER_MODE_FALSE!$MAINTAINER_MODE_FALSE$ac_delim
-MAINT!$MAINT$ac_delim
-CC!$CC$ac_delim
-CFLAGS!$CFLAGS$ac_delim
-LDFLAGS!$LDFLAGS$ac_delim
-CPPFLAGS!$CPPFLAGS$ac_delim
-ac_ct_CC!$ac_ct_CC$ac_delim
-EXEEXT!$EXEEXT$ac_delim
-OBJEXT!$OBJEXT$ac_delim
-INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim
-INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim
-INSTALL_DATA!$INSTALL_DATA$ac_delim
-build!$build$ac_delim
-build_cpu!$build_cpu$ac_delim
-build_vendor!$build_vendor$ac_delim
-build_os!$build_os$ac_delim
-host!$host$ac_delim
-host_cpu!$host_cpu$ac_delim
-host_vendor!$host_vendor$ac_delim
-host_os!$host_os$ac_delim
-SED!$SED$ac_delim
-GREP!$GREP$ac_delim
-EGREP!$EGREP$ac_delim
-LN_S!$LN_S$ac_delim
-ECHO!$ECHO$ac_delim
-AR!$AR$ac_delim
-RANLIB!$RANLIB$ac_delim
-STRIP!$STRIP$ac_delim
-CPP!$CPP$ac_delim
-CXX!$CXX$ac_delim
-CXXFLAGS!$CXXFLAGS$ac_delim
-ac_ct_CXX!$ac_ct_CXX$ac_delim
-CXXCPP!$CXXCPP$ac_delim
-F77!$F77$ac_delim
-FFLAGS!$FFLAGS$ac_delim
-ac_ct_F77!$ac_ct_F77$ac_delim
-LIBTOOL!$LIBTOOL$ac_delim
-am__isrc!$am__isrc$ac_delim
-CYGPATH_W!$CYGPATH_W$ac_delim
-PACKAGE!$PACKAGE$ac_delim
-VERSION!$VERSION$ac_delim
-ACLOCAL!$ACLOCAL$ac_delim
-AUTOCONF!$AUTOCONF$ac_delim
-AUTOMAKE!$AUTOMAKE$ac_delim
-AUTOHEADER!$AUTOHEADER$ac_delim
-MAKEINFO!$MAKEINFO$ac_delim
-install_sh!$install_sh$ac_delim
-INSTALL_STRIP_PROGRAM!$INSTALL_STRIP_PROGRAM$ac_delim
-mkdir_p!$mkdir_p$ac_delim
-AWK!$AWK$ac_delim
-SET_MAKE!$SET_MAKE$ac_delim
-am__leading_dot!$am__leading_dot$ac_delim
-AMTAR!$AMTAR$ac_delim
-am__tar!$am__tar$ac_delim
-am__untar!$am__untar$ac_delim
-DEPDIR!$DEPDIR$ac_delim
-am__include!$am__include$ac_delim
-am__quote!$am__quote$ac_delim
-AMDEP_TRUE!$AMDEP_TRUE$ac_delim
-_ACEOF
-
- if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 97; then
- break
- elif $ac_last_try; then
- { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
-echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
- { (exit 1); exit 1; }; }
- else
- ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
- fi
-done
-
-ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed`
-if test -n "$ac_eof"; then
- ac_eof=`echo "$ac_eof" | sort -nru | sed 1q`
- ac_eof=`expr $ac_eof + 1`
-fi
-
-cat >>$CONFIG_STATUS <<_ACEOF
-cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof
-/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-_ACEOF
-sed '
-s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g
-s/^/s,@/; s/!/@,|#_!!_#|/
-:n
-t n
-s/'"$ac_delim"'$/,g/; t
-s/$/\\/; p
-N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n
-' >>$CONFIG_STATUS <conf$$subs.sed
-rm -f conf$$subs.sed
-cat >>$CONFIG_STATUS <<_ACEOF
-CEOF$ac_eof
-_ACEOF
-
-
-ac_delim='%!_!# '
-for ac_last_try in false false false false false :; do
- cat >conf$$subs.sed <<_ACEOF
-AMDEP_FALSE!$AMDEP_FALSE$ac_delim
-AMDEPBACKSLASH!$AMDEPBACKSLASH$ac_delim
-CCDEPMODE!$CCDEPMODE$ac_delim
-am__fastdepCC_TRUE!$am__fastdepCC_TRUE$ac_delim
-am__fastdepCC_FALSE!$am__fastdepCC_FALSE$ac_delim
-CXXDEPMODE!$CXXDEPMODE$ac_delim
-am__fastdepCXX_TRUE!$am__fastdepCXX_TRUE$ac_delim
-am__fastdepCXX_FALSE!$am__fastdepCXX_FALSE$ac_delim
-LIBOBJS!$LIBOBJS$ac_delim
-HAVE_AUDIT_SYSCALLS_TRUE!$HAVE_AUDIT_SYSCALLS_TRUE$ac_delim
-HAVE_AUDIT_SYSCALLS_FALSE!$HAVE_AUDIT_SYSCALLS_FALSE$ac_delim
-LTLIBOBJS!$LTLIBOBJS$ac_delim
-_ACEOF
-
- if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 12; then
- break
- elif $ac_last_try; then
- { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
-echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
- { (exit 1); exit 1; }; }
- else
- ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
- fi
-done
-
-ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed`
-if test -n "$ac_eof"; then
- ac_eof=`echo "$ac_eof" | sort -nru | sed 1q`
- ac_eof=`expr $ac_eof + 1`
-fi
-
-cat >>$CONFIG_STATUS <<_ACEOF
-cat >"\$tmp/subs-2.sed" <<\CEOF$ac_eof
-/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end
-_ACEOF
-sed '
-s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g
-s/^/s,@/; s/!/@,|#_!!_#|/
-:n
-t n
-s/'"$ac_delim"'$/,g/; t
-s/$/\\/; p
-N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n
-' >>$CONFIG_STATUS <conf$$subs.sed
-rm -f conf$$subs.sed
-cat >>$CONFIG_STATUS <<_ACEOF
-:end
-s/|#_!!_#|//g
-CEOF$ac_eof
-_ACEOF
-
-
-# VPATH may cause trouble with some makes, so we remove $(srcdir),
-# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
-# trailing colons and then remove the whole line if VPATH becomes empty
-# (actually we leave an empty line to preserve line numbers).
-if test "x$srcdir" = x.; then
- ac_vpsub='/^[ ]*VPATH[ ]*=/{
-s/:*\$(srcdir):*/:/
-s/:*\${srcdir}:*/:/
-s/:*@srcdir@:*/:/
-s/^\([^=]*=[ ]*\):*/\1/
-s/:*$//
-s/^[^=]*=[ ]*$//
-}'
-fi
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-fi # test -n "$CONFIG_FILES"
-
-
-for ac_tag in :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS
-do
- case $ac_tag in
- :[FHLC]) ac_mode=$ac_tag; continue;;
- esac
- case $ac_mode$ac_tag in
- :[FHL]*:*);;
- :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5
-echo "$as_me: error: Invalid tag $ac_tag." >&2;}
- { (exit 1); exit 1; }; };;
- :[FH]-) ac_tag=-:-;;
- :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
- esac
- ac_save_IFS=$IFS
- IFS=:
- set x $ac_tag
- IFS=$ac_save_IFS
- shift
- ac_file=$1
- shift
-
- case $ac_mode in
- :L) ac_source=$1;;
- :[FH])
- ac_file_inputs=
- for ac_f
- do
- case $ac_f in
- -) ac_f="$tmp/stdin";;
- *) # Look for the file first in the build tree, then in the source tree
- # (if the path is not absolute). The absolute path cannot be DOS-style,
- # because $ac_f cannot contain `:'.
- test -f "$ac_f" ||
- case $ac_f in
- [\\/$]*) false;;
- *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
- esac ||
- { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5
-echo "$as_me: error: cannot find input file: $ac_f" >&2;}
- { (exit 1); exit 1; }; };;
- esac
- ac_file_inputs="$ac_file_inputs $ac_f"
- done
-
- # Let's still pretend it is `configure' which instantiates (i.e., don't
- # use $as_me), people would be surprised to read:
- # /* config.h. Generated by config.status. */
- configure_input="Generated from "`IFS=:
- echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure."
- if test x"$ac_file" != x-; then
- configure_input="$ac_file. $configure_input"
- { echo "$as_me:$LINENO: creating $ac_file" >&5
-echo "$as_me: creating $ac_file" >&6;}
- fi
-
- case $ac_tag in
- *:-:* | *:-) cat >"$tmp/stdin";;
- esac
- ;;
- esac
-
- ac_dir=`$as_dirname -- "$ac_file" ||
-$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$ac_file" : 'X\(//\)[^/]' \| \
- X"$ac_file" : 'X\(//\)$' \| \
- X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
-echo X"$ac_file" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- { as_dir="$ac_dir"
- case $as_dir in #(
- -*) as_dir=./$as_dir;;
- esac
- test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
- as_dirs=
- while :; do
- case $as_dir in #(
- *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
- *) as_qdir=$as_dir;;
- esac
- as_dirs="'$as_qdir' $as_dirs"
- as_dir=`$as_dirname -- "$as_dir" ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_dir" : 'X\(//\)[^/]' \| \
- X"$as_dir" : 'X\(//\)$' \| \
- X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-echo X"$as_dir" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- test -d "$as_dir" && break
- done
- test -z "$as_dirs" || eval "mkdir $as_dirs"
- } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
-echo "$as_me: error: cannot create directory $as_dir" >&2;}
- { (exit 1); exit 1; }; }; }
- ac_builddir=.
-
-case "$ac_dir" in
-.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
-*)
- ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
- # A ".." for each directory in $ac_dir_suffix.
- ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
- case $ac_top_builddir_sub in
- "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
- *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
- esac ;;
-esac
-ac_abs_top_builddir=$ac_pwd
-ac_abs_builddir=$ac_pwd$ac_dir_suffix
-# for backward compatibility:
-ac_top_builddir=$ac_top_build_prefix
-
-case $srcdir in
- .) # We are building in place.
- ac_srcdir=.
- ac_top_srcdir=$ac_top_builddir_sub
- ac_abs_top_srcdir=$ac_pwd ;;
- [\\/]* | ?:[\\/]* ) # Absolute name.
- ac_srcdir=$srcdir$ac_dir_suffix;
- ac_top_srcdir=$srcdir
- ac_abs_top_srcdir=$srcdir ;;
- *) # Relative name.
- ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
- ac_top_srcdir=$ac_top_build_prefix$srcdir
- ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
-esac
-ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
-
-
- case $ac_mode in
- :F)
- #
- # CONFIG_FILE
- #
-
- case $INSTALL in
- [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
- *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
- esac
- ac_MKDIR_P=$MKDIR_P
- case $MKDIR_P in
- [\\/$]* | ?:[\\/]* ) ;;
- */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
- esac
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-# If the template does not know about datarootdir, expand it.
-# FIXME: This hack should be removed a few years after 2.60.
-ac_datarootdir_hack=; ac_datarootdir_seen=
-
-case `sed -n '/datarootdir/ {
- p
- q
-}
-/@datadir@/p
-/@docdir@/p
-/@infodir@/p
-/@localedir@/p
-/@mandir@/p
-' $ac_file_inputs` in
-*datarootdir*) ac_datarootdir_seen=yes;;
-*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
- { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
-echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
- ac_datarootdir_hack='
- s&@datadir@&$datadir&g
- s&@docdir@&$docdir&g
- s&@infodir@&$infodir&g
- s&@localedir@&$localedir&g
- s&@mandir@&$mandir&g
- s&\\\${datarootdir}&$datarootdir&g' ;;
-esac
-_ACEOF
-
-# Neutralize VPATH when `$srcdir' = `.'.
-# Shell code in configure.ac might set extrasub.
-# FIXME: do we really want to maintain this feature?
-cat >>$CONFIG_STATUS <<_ACEOF
- sed "$ac_vpsub
-$extrasub
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
-:t
-/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-s&@configure_input@&$configure_input&;t t
-s&@top_builddir@&$ac_top_builddir_sub&;t t
-s&@srcdir@&$ac_srcdir&;t t
-s&@abs_srcdir@&$ac_abs_srcdir&;t t
-s&@top_srcdir@&$ac_top_srcdir&;t t
-s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
-s&@builddir@&$ac_builddir&;t t
-s&@abs_builddir@&$ac_abs_builddir&;t t
-s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
-s&@INSTALL@&$ac_INSTALL&;t t
-s&@MKDIR_P@&$ac_MKDIR_P&;t t
-$ac_datarootdir_hack
-" $ac_file_inputs | sed -f "$tmp/subs-1.sed" | sed -f "$tmp/subs-2.sed" >$tmp/out
-
-test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
- { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
- { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
- { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-which seems to be undefined. Please make sure it is defined." >&5
-echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-which seems to be undefined. Please make sure it is defined." >&2;}
-
- rm -f "$tmp/stdin"
- case $ac_file in
- -) cat "$tmp/out"; rm -f "$tmp/out";;
- *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;;
- esac
- ;;
- :H)
- #
- # CONFIG_HEADER
- #
-_ACEOF
-
-# Transform confdefs.h into a sed script `conftest.defines', that
-# substitutes the proper values into config.h.in to produce config.h.
-rm -f conftest.defines conftest.tail
-# First, append a space to every undef/define line, to ease matching.
-echo 's/$/ /' >conftest.defines
-# Then, protect against being on the right side of a sed subst, or in
-# an unquoted here document, in config.status. If some macros were
-# called several times there might be several #defines for the same
-# symbol, which is useless. But do not sort them, since the last
-# AC_DEFINE must be honored.
-ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]*
-# These sed commands are passed to sed as "A NAME B PARAMS C VALUE D", where
-# NAME is the cpp macro being defined, VALUE is the value it is being given.
-# PARAMS is the parameter list in the macro definition--in most cases, it's
-# just an empty string.
-ac_dA='s,^\\([ #]*\\)[^ ]*\\([ ]*'
-ac_dB='\\)[ (].*,\\1define\\2'
-ac_dC=' '
-ac_dD=' ,'
-
-uniq confdefs.h |
- sed -n '
- t rset
- :rset
- s/^[ ]*#[ ]*define[ ][ ]*//
- t ok
- d
- :ok
- s/[\\&,]/\\&/g
- s/^\('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/ '"$ac_dA"'\1'"$ac_dB"'\2'"${ac_dC}"'\3'"$ac_dD"'/p
- s/^\('"$ac_word_re"'\)[ ]*\(.*\)/'"$ac_dA"'\1'"$ac_dB$ac_dC"'\2'"$ac_dD"'/p
- ' >>conftest.defines
-
-# Remove the space that was appended to ease matching.
-# Then replace #undef with comments. This is necessary, for
-# example, in the case of _POSIX_SOURCE, which is predefined and required
-# on some systems where configure will not decide to define it.
-# (The regexp can be short, since the line contains either #define or #undef.)
-echo 's/ $//
-s,^[ #]*u.*,/* & */,' >>conftest.defines
-
-# Break up conftest.defines:
-ac_max_sed_lines=50
-
-# First sed command is: sed -f defines.sed $ac_file_inputs >"$tmp/out1"
-# Second one is: sed -f defines.sed "$tmp/out1" >"$tmp/out2"
-# Third one will be: sed -f defines.sed "$tmp/out2" >"$tmp/out1"
-# et cetera.
-ac_in='$ac_file_inputs'
-ac_out='"$tmp/out1"'
-ac_nxt='"$tmp/out2"'
-
-while :
-do
- # Write a here document:
- cat >>$CONFIG_STATUS <<_ACEOF
- # First, check the format of the line:
- cat >"\$tmp/defines.sed" <<\\CEOF
-/^[ ]*#[ ]*undef[ ][ ]*$ac_word_re[ ]*\$/b def
-/^[ ]*#[ ]*define[ ][ ]*$ac_word_re[( ]/b def
-b
-:def
-_ACEOF
- sed ${ac_max_sed_lines}q conftest.defines >>$CONFIG_STATUS
- echo 'CEOF
- sed -f "$tmp/defines.sed"' "$ac_in >$ac_out" >>$CONFIG_STATUS
- ac_in=$ac_out; ac_out=$ac_nxt; ac_nxt=$ac_in
- sed 1,${ac_max_sed_lines}d conftest.defines >conftest.tail
- grep . conftest.tail >/dev/null || break
- rm -f conftest.defines
- mv conftest.tail conftest.defines
-done
-rm -f conftest.defines conftest.tail
-
-echo "ac_result=$ac_in" >>$CONFIG_STATUS
-cat >>$CONFIG_STATUS <<\_ACEOF
- if test x"$ac_file" != x-; then
- echo "/* $configure_input */" >"$tmp/config.h"
- cat "$ac_result" >>"$tmp/config.h"
- if diff $ac_file "$tmp/config.h" >/dev/null 2>&1; then
- { echo "$as_me:$LINENO: $ac_file is unchanged" >&5
-echo "$as_me: $ac_file is unchanged" >&6;}
- else
- rm -f $ac_file
- mv "$tmp/config.h" $ac_file
- fi
- else
- echo "/* $configure_input */"
- cat "$ac_result"
- fi
- rm -f "$tmp/out12"
-# Compute $ac_file's index in $config_headers.
-_am_stamp_count=1
-for _am_header in $config_headers :; do
- case $_am_header in
- $ac_file | $ac_file:* )
- break ;;
- * )
- _am_stamp_count=`expr $_am_stamp_count + 1` ;;
- esac
-done
-echo "timestamp for $ac_file" >`$as_dirname -- $ac_file ||
-$as_expr X$ac_file : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X$ac_file : 'X\(//\)[^/]' \| \
- X$ac_file : 'X\(//\)$' \| \
- X$ac_file : 'X\(/\)' \| . 2>/dev/null ||
-echo X$ac_file |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`/stamp-h$_am_stamp_count
- ;;
-
- :C) { echo "$as_me:$LINENO: executing $ac_file commands" >&5
-echo "$as_me: executing $ac_file commands" >&6;}
- ;;
- esac
-
-
- case $ac_file$ac_mode in
- "depfiles":C) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do
- # Strip MF so we end up with the name of the file.
- mf=`echo "$mf" | sed -e 's/:.*$//'`
- # Check whether this is an Automake generated Makefile or not.
- # We used to match only the files named `Makefile.in', but
- # some people rename them; so instead we look at the file content.
- # Grep'ing the first line is not enough: some people post-process
- # each Makefile.in and add a new line on top of each file to say so.
- # Grep'ing the whole file is not good either: AIX grep has a line
- # limit of 2048, but all sed's we know have understand at least 4000.
- if sed 10q "$mf" | grep '^#.*generated by automake' > /dev/null 2>&1; then
- dirpart=`$as_dirname -- "$mf" ||
-$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$mf" : 'X\(//\)[^/]' \| \
- X"$mf" : 'X\(//\)$' \| \
- X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
-echo X"$mf" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- else
- continue
- fi
- # Extract the definition of DEPDIR, am__include, and am__quote
- # from the Makefile without running `make'.
- DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
- test -z "$DEPDIR" && continue
- am__include=`sed -n 's/^am__include = //p' < "$mf"`
- test -z "am__include" && continue
- am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
- # When using ansi2knr, U may be empty or an underscore; expand it
- U=`sed -n 's/^U = //p' < "$mf"`
- # Find all dependency output files, they are included files with
- # $(DEPDIR) in their names. We invoke sed twice because it is the
- # simplest approach to changing $(DEPDIR) to its actual value in the
- # expansion.
- for file in `sed -n "
- s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
- sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
- # Make sure the directory exists.
- test -f "$dirpart/$file" && continue
- fdir=`$as_dirname -- "$file" ||
-$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$file" : 'X\(//\)[^/]' \| \
- X"$file" : 'X\(//\)$' \| \
- X"$file" : 'X\(/\)' \| . 2>/dev/null ||
-echo X"$file" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- { as_dir=$dirpart/$fdir
- case $as_dir in #(
- -*) as_dir=./$as_dir;;
- esac
- test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
- as_dirs=
- while :; do
- case $as_dir in #(
- *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
- *) as_qdir=$as_dir;;
- esac
- as_dirs="'$as_qdir' $as_dirs"
- as_dir=`$as_dirname -- "$as_dir" ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_dir" : 'X\(//\)[^/]' \| \
- X"$as_dir" : 'X\(//\)$' \| \
- X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-echo X"$as_dir" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- test -d "$as_dir" && break
- done
- test -z "$as_dirs" || eval "mkdir $as_dirs"
- } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
-echo "$as_me: error: cannot create directory $as_dir" >&2;}
- { (exit 1); exit 1; }; }; }
- # echo "creating $dirpart/$file"
- echo '# dummy' > "$dirpart/$file"
- done
-done
- ;;
-
- esac
-done # for ac_tag
-
-
-{ (exit 0); exit 0; }
-_ACEOF
-chmod +x $CONFIG_STATUS
-ac_clean_files=$ac_clean_files_save
-
-
-# configure is writing to config.log, and then calls config.status.
-# config.status does its own redirection, appending to config.log.
-# Unfortunately, on DOS this fails, as config.log is still kept open
-# by configure, so config.status won't be able to write to it; its
-# output is simply discarded. So we exec the FD to /dev/null,
-# effectively closing config.log, so it can be properly (re)opened and
-# appended to by config.status. When coming back to configure, we
-# need to make the FD available again.
-if test "$no_create" != yes; then
- ac_cs_success=:
- ac_config_status_args=
- test "$silent" = yes &&
- ac_config_status_args="$ac_config_status_args --quiet"
- exec 5>/dev/null
- $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
- exec 5>>config.log
- # Use ||, not &&, to avoid exiting from the if with $? = 1, which
- # would make configure fail if this is the last instruction.
- $ac_cs_success || { (exit 1); exit 1; }
-fi
-
Copied: vendor/openbsm/1.2_alpha4/configure (from rev 11163, vendor/openbsm/dist/configure)
===================================================================
--- vendor/openbsm/1.2_alpha4/configure (rev 0)
+++ vendor/openbsm/1.2_alpha4/configure 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,16035 @@
+#! /bin/sh
+# Guess values for system-dependent variables and create Makefiles.
+# Generated by GNU Autoconf 2.69 for OpenBSM 1.2-alpha4.
+#
+# Report bugs to <trustedbsd-audit at TrustedBSD.org>.
+#
+#
+# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc.
+#
+#
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+ emulate sh
+ NULLCMD=:
+ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in #(
+ *posix*) :
+ set -o posix ;; #(
+ *) :
+ ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='print -r --'
+ as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='printf %s\n'
+ as_echo_n='printf %s'
+else
+ if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+ as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+ as_echo_n='/usr/ucb/echo -n'
+ else
+ as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+ as_echo_n_body='eval
+ arg=$1;
+ case $arg in #(
+ *"$as_nl"*)
+ expr "X$arg" : "X\\(.*\\)$as_nl";
+ arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+ esac;
+ expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+ '
+ export as_echo_n_body
+ as_echo_n='sh -c $as_echo_n_body as_echo'
+ fi
+ export as_echo_body
+ as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ PATH_SEPARATOR=:
+ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+ (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+ PATH_SEPARATOR=';'
+ }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order. Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" "" $as_nl"
+
+# Find who we are. Look in the path if we contain no directory separator.
+as_myself=
+case $0 in #((
+ *[\\/]* ) as_myself=$0 ;;
+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+ as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+ $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+ exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there. '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+# Use a proper internal environment variable to ensure we don't fall
+ # into an infinite loop, continuously re-executing ourselves.
+ if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then
+ _as_can_reexec=no; export _as_can_reexec;
+ # We cannot yet assume a decent shell, so we have to provide a
+# neutralization value for shells without unset; and this also
+# works around shells that cannot unset nonexistent variables.
+# Preserve -v and -x to the replacement shell.
+BASH_ENV=/dev/null
+ENV=/dev/null
+(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+case $- in # ((((
+ *v*x* | *x*v* ) as_opts=-vx ;;
+ *v* ) as_opts=-v ;;
+ *x* ) as_opts=-x ;;
+ * ) as_opts= ;;
+esac
+exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
+# Admittedly, this is quite paranoid, since all the known shells bail
+# out after a failed `exec'.
+$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
+as_fn_exit 255
+ fi
+ # We don't want this to propagate to other subprocesses.
+ { _as_can_reexec=; unset _as_can_reexec;}
+if test "x$CONFIG_SHELL" = x; then
+ as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
+ emulate sh
+ NULLCMD=:
+ # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '\${1+\"\$@\"}'='\"\$@\"'
+ setopt NO_GLOB_SUBST
+else
+ case \`(set -o) 2>/dev/null\` in #(
+ *posix*) :
+ set -o posix ;; #(
+ *) :
+ ;;
+esac
+fi
+"
+ as_required="as_fn_return () { (exit \$1); }
+as_fn_success () { as_fn_return 0; }
+as_fn_failure () { as_fn_return 1; }
+as_fn_ret_success () { return 0; }
+as_fn_ret_failure () { return 1; }
+
+exitcode=0
+as_fn_success || { exitcode=1; echo as_fn_success failed.; }
+as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
+as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
+as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
+if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
+
+else
+ exitcode=1; echo positional parameters were not saved.
+fi
+test x\$exitcode = x0 || exit 1
+test -x / || exit 1"
+ as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
+ as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
+ eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
+ test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
+
+ test -n \"\${ZSH_VERSION+set}\${BASH_VERSION+set}\" || (
+ ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+ ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
+ ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
+ PATH=/empty FPATH=/empty; export PATH FPATH
+ test \"X\`printf %s \$ECHO\`\" = \"X\$ECHO\" \\
+ || test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" ) || exit 1
+test \$(( 1 + 1 )) = 2 || exit 1"
+ if (eval "$as_required") 2>/dev/null; then :
+ as_have_required=yes
+else
+ as_have_required=no
+fi
+ if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :
+
+else
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+as_found=false
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ as_found=:
+ case $as_dir in #(
+ /*)
+ for as_base in sh bash ksh sh5; do
+ # Try only shells that exist, to save several forks.
+ as_shell=$as_dir/$as_base
+ if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
+ { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
+ CONFIG_SHELL=$as_shell as_have_required=yes
+ if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :
+ break 2
+fi
+fi
+ done;;
+ esac
+ as_found=false
+done
+$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
+ { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
+ CONFIG_SHELL=$SHELL as_have_required=yes
+fi; }
+IFS=$as_save_IFS
+
+
+ if test "x$CONFIG_SHELL" != x; then :
+ export CONFIG_SHELL
+ # We cannot yet assume a decent shell, so we have to provide a
+# neutralization value for shells without unset; and this also
+# works around shells that cannot unset nonexistent variables.
+# Preserve -v and -x to the replacement shell.
+BASH_ENV=/dev/null
+ENV=/dev/null
+(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+case $- in # ((((
+ *v*x* | *x*v* ) as_opts=-vx ;;
+ *v* ) as_opts=-v ;;
+ *x* ) as_opts=-x ;;
+ * ) as_opts= ;;
+esac
+exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
+# Admittedly, this is quite paranoid, since all the known shells bail
+# out after a failed `exec'.
+$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
+exit 255
+fi
+
+ if test x$as_have_required = xno; then :
+ $as_echo "$0: This script requires a shell more modern than all"
+ $as_echo "$0: the shells that I found on your system."
+ if test x${ZSH_VERSION+set} = xset ; then
+ $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
+ $as_echo "$0: be upgraded to zsh 4.3.4 or later."
+ else
+ $as_echo "$0: Please tell bug-autoconf at gnu.org and
+$0: trustedbsd-audit at TrustedBSD.org about your system,
+$0: including any error possibly output before this
+$0: message. Then install a modern shell, or manually run
+$0: the script under such a shell if you do have one."
+ fi
+ exit 1
+fi
+fi
+fi
+SHELL=${CONFIG_SHELL-/bin/sh}
+export SHELL
+# Unset more variables known to interfere with behavior of common tools.
+CLICOLOR_FORCE= GREP_OPTIONS=
+unset CLICOLOR_FORCE GREP_OPTIONS
+
+## --------------------- ##
+## M4sh Shell Functions. ##
+## --------------------- ##
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+ { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+ return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+ set +e
+ as_fn_set_status $1
+ exit $1
+} # as_fn_exit
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+ case $as_dir in #(
+ -*) as_dir=./$as_dir;;
+ esac
+ test -d "$as_dir" || eval $as_mkdir_p || {
+ as_dirs=
+ while :; do
+ case $as_dir in #(
+ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+ *) as_qdir=$as_dir;;
+ esac
+ as_dirs="'$as_qdir' $as_dirs"
+ as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ test -d "$as_dir" && break
+ done
+ test -z "$as_dirs" || eval "mkdir $as_dirs"
+ } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+
+# as_fn_executable_p FILE
+# -----------------------
+# Test if FILE is an executable regular file.
+as_fn_executable_p ()
+{
+ test -f "$1" && test -x "$1"
+} # as_fn_executable_p
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+ eval 'as_fn_append ()
+ {
+ eval $1+=\$2
+ }'
+else
+ as_fn_append ()
+ {
+ eval $1=\$$1\$2
+ }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+ eval 'as_fn_arith ()
+ {
+ as_val=$(( $* ))
+ }'
+else
+ as_fn_arith ()
+ {
+ as_val=`expr "$@" || test $? -eq 1`
+ }
+fi # as_fn_arith
+
+
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with STATUS, using 1 if that was 0.
+as_fn_error ()
+{
+ as_status=$1; test $as_status -eq 0 && as_status=1
+ if test "$4"; then
+ as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+ fi
+ $as_echo "$as_me: error: $2" >&2
+ as_fn_exit $as_status
+} # as_fn_error
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+ as_basename=basename
+else
+ as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+ as_dirname=dirname
+else
+ as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+ sed '/^.*\/\([^/][^/]*\)\/*$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+
+ as_lineno_1=$LINENO as_lineno_1a=$LINENO
+ as_lineno_2=$LINENO as_lineno_2a=$LINENO
+ eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
+ test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
+ # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-)
+ sed -n '
+ p
+ /[$]LINENO/=
+ ' <$as_myself |
+ sed '
+ s/[$]LINENO.*/&-/
+ t lineno
+ b
+ :lineno
+ N
+ :loop
+ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
+ t loop
+ s/-\n.*//
+ ' >$as_me.lineno &&
+ chmod +x "$as_me.lineno" ||
+ { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
+
+ # If we had to re-execute with $CONFIG_SHELL, we're ensured to have
+ # already done that, so ensure we don't try to do so again and fall
+ # in an infinite loop. This has already happened in practice.
+ _as_can_reexec=no; export _as_can_reexec
+ # Don't try to exec as it changes $[0], causing all sort of problems
+ # (the dirname of $[0] is not the place where we might find the
+ # original and so on. Autoconf is especially sensitive to this).
+ . "./$as_me.lineno"
+ # Exit status is that of the last command.
+ exit
+}
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+ case `echo 'xy\c'` in
+ *c*) ECHO_T=' ';; # ECHO_T is single tab character.
+ xy) ECHO_C='\c';;
+ *) echo `echo ksh88 bug on AIX 6.1` > /dev/null
+ ECHO_T=' ';;
+ esac;;
+*)
+ ECHO_N='-n';;
+esac
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+ rm -f conf$$.dir/conf$$.file
+else
+ rm -f conf$$.dir
+ mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+ if ln -s conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s='ln -s'
+ # ... but there are two gotchas:
+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+ # In both cases, we have to default to `cp -pR'.
+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+ as_ln_s='cp -pR'
+ elif ln conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s=ln
+ else
+ as_ln_s='cp -pR'
+ fi
+else
+ as_ln_s='cp -pR'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+if mkdir -p . 2>/dev/null; then
+ as_mkdir_p='mkdir -p "$as_dir"'
+else
+ test -d ./-p && rmdir ./-p
+ as_mkdir_p=false
+fi
+
+as_test_x='test -x'
+as_executable_p=as_fn_executable_p
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+SHELL=${CONFIG_SHELL-/bin/sh}
+
+
+test -n "$DJDIR" || exec 7<&0 </dev/null
+exec 6>&1
+
+# Name of the host.
+# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,
+# so uname gets run too.
+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
+
+#
+# Initializations.
+#
+ac_default_prefix=/usr/local
+ac_clean_files=
+ac_config_libobj_dir=.
+LIBOBJS=
+cross_compiling=no
+subdirs=
+MFLAGS=
+MAKEFLAGS=
+
+# Identity of this package.
+PACKAGE_NAME='OpenBSM'
+PACKAGE_TARNAME='openbsm'
+PACKAGE_VERSION='1.2-alpha4'
+PACKAGE_STRING='OpenBSM 1.2-alpha4'
+PACKAGE_BUGREPORT='trustedbsd-audit at TrustedBSD.org'
+PACKAGE_URL=''
+
+ac_unique_file="bin/auditreduce/auditreduce.c"
+# Factoring default headers for most tests.
+ac_includes_default="\
+#include <stdio.h>
+#ifdef HAVE_SYS_TYPES_H
+# include <sys/types.h>
+#endif
+#ifdef HAVE_SYS_STAT_H
+# include <sys/stat.h>
+#endif
+#ifdef STDC_HEADERS
+# include <stdlib.h>
+# include <stddef.h>
+#else
+# ifdef HAVE_STDLIB_H
+# include <stdlib.h>
+# endif
+#endif
+#ifdef HAVE_STRING_H
+# if !defined STDC_HEADERS && defined HAVE_MEMORY_H
+# include <memory.h>
+# endif
+# include <string.h>
+#endif
+#ifdef HAVE_STRINGS_H
+# include <strings.h>
+#endif
+#ifdef HAVE_INTTYPES_H
+# include <inttypes.h>
+#endif
+#ifdef HAVE_STDINT_H
+# include <stdint.h>
+#endif
+#ifdef HAVE_UNISTD_H
+# include <unistd.h>
+#endif"
+
+ac_header_list=
+ac_func_list=
+ac_subst_vars='am__EXEEXT_FALSE
+am__EXEEXT_TRUE
+LTLIBOBJS
+USE_MACH_IPC_FALSE
+USE_MACH_IPC_TRUE
+HAVE_AUDIT_SYSCALLS_FALSE
+HAVE_AUDIT_SYSCALLS_TRUE
+LIBOBJS
+am__fastdepCC_FALSE
+am__fastdepCC_TRUE
+CCDEPMODE
+am__nodep
+AMDEPBACKSLASH
+AMDEP_FALSE
+AMDEP_TRUE
+am__quote
+am__include
+DEPDIR
+am__untar
+am__tar
+AMTAR
+am__leading_dot
+SET_MAKE
+mkdir_p
+MKDIR_P
+INSTALL_STRIP_PROGRAM
+install_sh
+MAKEINFO
+AUTOHEADER
+AUTOMAKE
+AUTOCONF
+ACLOCAL
+VERSION
+PACKAGE
+CYGPATH_W
+am__isrc
+YFLAGS
+YACC
+CPP
+OTOOL64
+OTOOL
+LIPO
+NMEDIT
+DSYMUTIL
+MANIFEST_TOOL
+AWK
+RANLIB
+STRIP
+ac_ct_AR
+AR
+DLLTOOL
+OBJDUMP
+LN_S
+NM
+ac_ct_DUMPBIN
+DUMPBIN
+LD
+FGREP
+EGREP
+GREP
+SED
+host_os
+host_vendor
+host_cpu
+host
+build_os
+build_vendor
+build_cpu
+build
+LIBTOOL
+LEXLIB
+LEX_OUTPUT_ROOT
+LEX
+INSTALL_DATA
+INSTALL_SCRIPT
+INSTALL_PROGRAM
+OBJEXT
+EXEEXT
+ac_ct_CC
+CPPFLAGS
+LDFLAGS
+CFLAGS
+CC
+MIG
+USE_NATIVE_INCLUDES_FALSE
+USE_NATIVE_INCLUDES_TRUE
+MAINT
+MAINTAINER_MODE_FALSE
+MAINTAINER_MODE_TRUE
+target_alias
+host_alias
+build_alias
+LIBS
+ECHO_T
+ECHO_N
+ECHO_C
+DEFS
+mandir
+localedir
+libdir
+psdir
+pdfdir
+dvidir
+htmldir
+infodir
+docdir
+oldincludedir
+includedir
+localstatedir
+sharedstatedir
+sysconfdir
+datadir
+datarootdir
+libexecdir
+sbindir
+bindir
+program_transform_name
+prefix
+exec_prefix
+PACKAGE_URL
+PACKAGE_BUGREPORT
+PACKAGE_STRING
+PACKAGE_VERSION
+PACKAGE_TARNAME
+PACKAGE_NAME
+PATH_SEPARATOR
+SHELL'
+ac_subst_files=''
+ac_user_opts='
+enable_option_checking
+enable_maintainer_mode
+with_native_includes
+enable_shared
+enable_static
+with_pic
+enable_fast_install
+with_gnu_ld
+with_sysroot
+enable_libtool_lock
+enable_dependency_tracking
+'
+ ac_precious_vars='build_alias
+host_alias
+target_alias
+CC
+CFLAGS
+LDFLAGS
+LIBS
+CPPFLAGS
+CPP
+YACC
+YFLAGS'
+
+
+# Initialize some variables set by options.
+ac_init_help=
+ac_init_version=false
+ac_unrecognized_opts=
+ac_unrecognized_sep=
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+cache_file=/dev/null
+exec_prefix=NONE
+no_create=
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+verbose=
+x_includes=NONE
+x_libraries=NONE
+
+# Installation directory options.
+# These are left unexpanded so users can "make install exec_prefix=/foo"
+# and all the variables that are supposed to be based on exec_prefix
+# by default will actually change.
+# Use braces instead of parens because sh, perl, etc. also accept them.
+# (The list follows the same order as the GNU Coding Standards.)
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datarootdir='${prefix}/share'
+datadir='${datarootdir}'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
+infodir='${datarootdir}/info'
+htmldir='${docdir}'
+dvidir='${docdir}'
+pdfdir='${docdir}'
+psdir='${docdir}'
+libdir='${exec_prefix}/lib'
+localedir='${datarootdir}/locale'
+mandir='${datarootdir}/man'
+
+ac_prev=
+ac_dashdash=
+for ac_option
+do
+ # If the previous option needs an argument, assign it.
+ if test -n "$ac_prev"; then
+ eval $ac_prev=\$ac_option
+ ac_prev=
+ continue
+ fi
+
+ case $ac_option in
+ *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
+ *=) ac_optarg= ;;
+ *) ac_optarg=yes ;;
+ esac
+
+ # Accept the important Cygnus configure options, so we can diagnose typos.
+
+ case $ac_dashdash$ac_option in
+ --)
+ ac_dashdash=yes ;;
+
+ -bindir | --bindir | --bindi | --bind | --bin | --bi)
+ ac_prev=bindir ;;
+ -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+ bindir=$ac_optarg ;;
+
+ -build | --build | --buil | --bui | --bu)
+ ac_prev=build_alias ;;
+ -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+ build_alias=$ac_optarg ;;
+
+ -cache-file | --cache-file | --cache-fil | --cache-fi \
+ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+ ac_prev=cache_file ;;
+ -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+ cache_file=$ac_optarg ;;
+
+ --config-cache | -C)
+ cache_file=config.cache ;;
+
+ -datadir | --datadir | --datadi | --datad)
+ ac_prev=datadir ;;
+ -datadir=* | --datadir=* | --datadi=* | --datad=*)
+ datadir=$ac_optarg ;;
+
+ -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
+ | --dataroo | --dataro | --datar)
+ ac_prev=datarootdir ;;
+ -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
+ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
+ datarootdir=$ac_optarg ;;
+
+ -disable-* | --disable-*)
+ ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ as_fn_error $? "invalid feature name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"enable_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
+ esac
+ eval enable_$ac_useropt=no ;;
+
+ -docdir | --docdir | --docdi | --doc | --do)
+ ac_prev=docdir ;;
+ -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
+ docdir=$ac_optarg ;;
+
+ -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
+ ac_prev=dvidir ;;
+ -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
+ dvidir=$ac_optarg ;;
+
+ -enable-* | --enable-*)
+ ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ as_fn_error $? "invalid feature name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"enable_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
+ esac
+ eval enable_$ac_useropt=\$ac_optarg ;;
+
+ -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+ | --exec | --exe | --ex)
+ ac_prev=exec_prefix ;;
+ -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+ | --exec=* | --exe=* | --ex=*)
+ exec_prefix=$ac_optarg ;;
+
+ -gas | --gas | --ga | --g)
+ # Obsolete; use --with-gas.
+ with_gas=yes ;;
+
+ -help | --help | --hel | --he | -h)
+ ac_init_help=long ;;
+ -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
+ ac_init_help=recursive ;;
+ -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
+ ac_init_help=short ;;
+
+ -host | --host | --hos | --ho)
+ ac_prev=host_alias ;;
+ -host=* | --host=* | --hos=* | --ho=*)
+ host_alias=$ac_optarg ;;
+
+ -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
+ ac_prev=htmldir ;;
+ -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
+ | --ht=*)
+ htmldir=$ac_optarg ;;
+
+ -includedir | --includedir | --includedi | --included | --include \
+ | --includ | --inclu | --incl | --inc)
+ ac_prev=includedir ;;
+ -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+ | --includ=* | --inclu=* | --incl=* | --inc=*)
+ includedir=$ac_optarg ;;
+
+ -infodir | --infodir | --infodi | --infod | --info | --inf)
+ ac_prev=infodir ;;
+ -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+ infodir=$ac_optarg ;;
+
+ -libdir | --libdir | --libdi | --libd)
+ ac_prev=libdir ;;
+ -libdir=* | --libdir=* | --libdi=* | --libd=*)
+ libdir=$ac_optarg ;;
+
+ -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+ | --libexe | --libex | --libe)
+ ac_prev=libexecdir ;;
+ -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+ | --libexe=* | --libex=* | --libe=*)
+ libexecdir=$ac_optarg ;;
+
+ -localedir | --localedir | --localedi | --localed | --locale)
+ ac_prev=localedir ;;
+ -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
+ localedir=$ac_optarg ;;
+
+ -localstatedir | --localstatedir | --localstatedi | --localstated \
+ | --localstate | --localstat | --localsta | --localst | --locals)
+ ac_prev=localstatedir ;;
+ -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
+ localstatedir=$ac_optarg ;;
+
+ -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+ ac_prev=mandir ;;
+ -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+ mandir=$ac_optarg ;;
+
+ -nfp | --nfp | --nf)
+ # Obsolete; use --without-fp.
+ with_fp=no ;;
+
+ -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+ | --no-cr | --no-c | -n)
+ no_create=yes ;;
+
+ -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+ no_recursion=yes ;;
+
+ -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+ | --oldin | --oldi | --old | --ol | --o)
+ ac_prev=oldincludedir ;;
+ -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+ oldincludedir=$ac_optarg ;;
+
+ -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+ ac_prev=prefix ;;
+ -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+ prefix=$ac_optarg ;;
+
+ -program-prefix | --program-prefix | --program-prefi | --program-pref \
+ | --program-pre | --program-pr | --program-p)
+ ac_prev=program_prefix ;;
+ -program-prefix=* | --program-prefix=* | --program-prefi=* \
+ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+ program_prefix=$ac_optarg ;;
+
+ -program-suffix | --program-suffix | --program-suffi | --program-suff \
+ | --program-suf | --program-su | --program-s)
+ ac_prev=program_suffix ;;
+ -program-suffix=* | --program-suffix=* | --program-suffi=* \
+ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+ program_suffix=$ac_optarg ;;
+
+ -program-transform-name | --program-transform-name \
+ | --program-transform-nam | --program-transform-na \
+ | --program-transform-n | --program-transform- \
+ | --program-transform | --program-transfor \
+ | --program-transfo | --program-transf \
+ | --program-trans | --program-tran \
+ | --progr-tra | --program-tr | --program-t)
+ ac_prev=program_transform_name ;;
+ -program-transform-name=* | --program-transform-name=* \
+ | --program-transform-nam=* | --program-transform-na=* \
+ | --program-transform-n=* | --program-transform-=* \
+ | --program-transform=* | --program-transfor=* \
+ | --program-transfo=* | --program-transf=* \
+ | --program-trans=* | --program-tran=* \
+ | --progr-tra=* | --program-tr=* | --program-t=*)
+ program_transform_name=$ac_optarg ;;
+
+ -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
+ ac_prev=pdfdir ;;
+ -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
+ pdfdir=$ac_optarg ;;
+
+ -psdir | --psdir | --psdi | --psd | --ps)
+ ac_prev=psdir ;;
+ -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
+ psdir=$ac_optarg ;;
+
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil)
+ silent=yes ;;
+
+ -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+ ac_prev=sbindir ;;
+ -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+ | --sbi=* | --sb=*)
+ sbindir=$ac_optarg ;;
+
+ -sharedstatedir | --sharedstatedir | --sharedstatedi \
+ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+ | --sharedst | --shareds | --shared | --share | --shar \
+ | --sha | --sh)
+ ac_prev=sharedstatedir ;;
+ -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+ | --sha=* | --sh=*)
+ sharedstatedir=$ac_optarg ;;
+
+ -site | --site | --sit)
+ ac_prev=site ;;
+ -site=* | --site=* | --sit=*)
+ site=$ac_optarg ;;
+
+ -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+ ac_prev=srcdir ;;
+ -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+ srcdir=$ac_optarg ;;
+
+ -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+ | --syscon | --sysco | --sysc | --sys | --sy)
+ ac_prev=sysconfdir ;;
+ -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+ sysconfdir=$ac_optarg ;;
+
+ -target | --target | --targe | --targ | --tar | --ta | --t)
+ ac_prev=target_alias ;;
+ -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+ target_alias=$ac_optarg ;;
+
+ -v | -verbose | --verbose | --verbos | --verbo | --verb)
+ verbose=yes ;;
+
+ -version | --version | --versio | --versi | --vers | -V)
+ ac_init_version=: ;;
+
+ -with-* | --with-*)
+ ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ as_fn_error $? "invalid package name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"with_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
+ esac
+ eval with_$ac_useropt=\$ac_optarg ;;
+
+ -without-* | --without-*)
+ ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ as_fn_error $? "invalid package name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"with_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
+ esac
+ eval with_$ac_useropt=no ;;
+
+ --x)
+ # Obsolete; use --with-x.
+ with_x=yes ;;
+
+ -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+ | --x-incl | --x-inc | --x-in | --x-i)
+ ac_prev=x_includes ;;
+ -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+ x_includes=$ac_optarg ;;
+
+ -x-libraries | --x-libraries | --x-librarie | --x-librari \
+ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+ ac_prev=x_libraries ;;
+ -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+ x_libraries=$ac_optarg ;;
+
+ -*) as_fn_error $? "unrecognized option: \`$ac_option'
+Try \`$0 --help' for more information"
+ ;;
+
+ *=*)
+ ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
+ # Reject names that are not valid shell variable names.
+ case $ac_envvar in #(
+ '' | [0-9]* | *[!_$as_cr_alnum]* )
+ as_fn_error $? "invalid variable name: \`$ac_envvar'" ;;
+ esac
+ eval $ac_envvar=\$ac_optarg
+ export $ac_envvar ;;
+
+ *)
+ # FIXME: should be removed in autoconf 3.0.
+ $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
+ expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+ $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
+ : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}"
+ ;;
+
+ esac
+done
+
+if test -n "$ac_prev"; then
+ ac_option=--`echo $ac_prev | sed 's/_/-/g'`
+ as_fn_error $? "missing argument to $ac_option"
+fi
+
+if test -n "$ac_unrecognized_opts"; then
+ case $enable_option_checking in
+ no) ;;
+ fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;;
+ *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
+ esac
+fi
+
+# Check all directory arguments for consistency.
+for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \
+ datadir sysconfdir sharedstatedir localstatedir includedir \
+ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
+ libdir localedir mandir
+do
+ eval ac_val=\$$ac_var
+ # Remove trailing slashes.
+ case $ac_val in
+ */ )
+ ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
+ eval $ac_var=\$ac_val;;
+ esac
+ # Be sure to have absolute directory names.
+ case $ac_val in
+ [\\/$]* | ?:[\\/]* ) continue;;
+ NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
+ esac
+ as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val"
+done
+
+# There might be people who depend on the old broken behavior: `$host'
+# used to hold the argument of --host etc.
+# FIXME: To remove some day.
+build=$build_alias
+host=$host_alias
+target=$target_alias
+
+# FIXME: To remove some day.
+if test "x$host_alias" != x; then
+ if test "x$build_alias" = x; then
+ cross_compiling=maybe
+ elif test "x$build_alias" != "x$host_alias"; then
+ cross_compiling=yes
+ fi
+fi
+
+ac_tool_prefix=
+test -n "$host_alias" && ac_tool_prefix=$host_alias-
+
+test "$silent" = yes && exec 6>/dev/null
+
+
+ac_pwd=`pwd` && test -n "$ac_pwd" &&
+ac_ls_di=`ls -di .` &&
+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
+ as_fn_error $? "working directory cannot be determined"
+test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
+ as_fn_error $? "pwd does not report name of working directory"
+
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+ ac_srcdir_defaulted=yes
+ # Try the directory containing this script, then the parent directory.
+ ac_confdir=`$as_dirname -- "$as_myself" ||
+$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_myself" : 'X\(//\)[^/]' \| \
+ X"$as_myself" : 'X\(//\)$' \| \
+ X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_myself" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ srcdir=$ac_confdir
+ if test ! -r "$srcdir/$ac_unique_file"; then
+ srcdir=..
+ fi
+else
+ ac_srcdir_defaulted=no
+fi
+if test ! -r "$srcdir/$ac_unique_file"; then
+ test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
+ as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir"
+fi
+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
+ac_abs_confdir=`(
+ cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg"
+ pwd)`
+# When building in place, set srcdir=.
+if test "$ac_abs_confdir" = "$ac_pwd"; then
+ srcdir=.
+fi
+# Remove unnecessary trailing slashes from srcdir.
+# Double slashes in file names in object file debugging info
+# mess up M-x gdb in Emacs.
+case $srcdir in
+*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
+esac
+for ac_var in $ac_precious_vars; do
+ eval ac_env_${ac_var}_set=\${${ac_var}+set}
+ eval ac_env_${ac_var}_value=\$${ac_var}
+ eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
+ eval ac_cv_env_${ac_var}_value=\$${ac_var}
+done
+
+#
+# Report the --help message.
+#
+if test "$ac_init_help" = "long"; then
+ # Omit some internal or obsolete options to make the list less imposing.
+ # This message is too long to be a string in the A/UX 3.1 sh.
+ cat <<_ACEOF
+\`configure' configures OpenBSM 1.2-alpha4 to adapt to many kinds of systems.
+
+Usage: $0 [OPTION]... [VAR=VALUE]...
+
+To assign environment variables (e.g., CC, CFLAGS...), specify them as
+VAR=VALUE. See below for descriptions of some of the useful variables.
+
+Defaults for the options are specified in brackets.
+
+Configuration:
+ -h, --help display this help and exit
+ --help=short display options specific to this package
+ --help=recursive display the short help of all the included packages
+ -V, --version display version information and exit
+ -q, --quiet, --silent do not print \`checking ...' messages
+ --cache-file=FILE cache test results in FILE [disabled]
+ -C, --config-cache alias for \`--cache-file=config.cache'
+ -n, --no-create do not create output files
+ --srcdir=DIR find the sources in DIR [configure dir or \`..']
+
+Installation directories:
+ --prefix=PREFIX install architecture-independent files in PREFIX
+ [$ac_default_prefix]
+ --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
+ [PREFIX]
+
+By default, \`make install' will install all the files in
+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
+an installation prefix other than \`$ac_default_prefix' using \`--prefix',
+for instance \`--prefix=\$HOME'.
+
+For better control, use the options below.
+
+Fine tuning of the installation directories:
+ --bindir=DIR user executables [EPREFIX/bin]
+ --sbindir=DIR system admin executables [EPREFIX/sbin]
+ --libexecdir=DIR program executables [EPREFIX/libexec]
+ --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
+ --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
+ --localstatedir=DIR modifiable single-machine data [PREFIX/var]
+ --libdir=DIR object code libraries [EPREFIX/lib]
+ --includedir=DIR C header files [PREFIX/include]
+ --oldincludedir=DIR C header files for non-gcc [/usr/include]
+ --datarootdir=DIR read-only arch.-independent data root [PREFIX/share]
+ --datadir=DIR read-only architecture-independent data [DATAROOTDIR]
+ --infodir=DIR info documentation [DATAROOTDIR/info]
+ --localedir=DIR locale-dependent data [DATAROOTDIR/locale]
+ --mandir=DIR man documentation [DATAROOTDIR/man]
+ --docdir=DIR documentation root [DATAROOTDIR/doc/openbsm]
+ --htmldir=DIR html documentation [DOCDIR]
+ --dvidir=DIR dvi documentation [DOCDIR]
+ --pdfdir=DIR pdf documentation [DOCDIR]
+ --psdir=DIR ps documentation [DOCDIR]
+_ACEOF
+
+ cat <<\_ACEOF
+
+Program names:
+ --program-prefix=PREFIX prepend PREFIX to installed program names
+ --program-suffix=SUFFIX append SUFFIX to installed program names
+ --program-transform-name=PROGRAM run sed PROGRAM on installed program names
+
+System types:
+ --build=BUILD configure for building on BUILD [guessed]
+ --host=HOST cross-compile to build programs to run on HOST [BUILD]
+_ACEOF
+fi
+
+if test -n "$ac_init_help"; then
+ case $ac_init_help in
+ short | recursive ) echo "Configuration of OpenBSM 1.2-alpha4:";;
+ esac
+ cat <<\_ACEOF
+
+Optional Features:
+ --disable-option-checking ignore unrecognized --enable/--with options
+ --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
+ --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
+ --enable-maintainer-mode
+ enable make rules and dependencies not useful (and
+ sometimes confusing) to the casual installer
+ --enable-shared[=PKGS] build shared libraries [default=yes]
+ --enable-static[=PKGS] build static libraries [default=yes]
+ --enable-fast-install[=PKGS]
+ optimize for fast installation [default=yes]
+ --disable-libtool-lock avoid locking (might break parallel builds)
+ --enable-dependency-tracking
+ do not reject slow dependency extractors
+ --disable-dependency-tracking
+ speeds up one-time build
+
+Optional Packages:
+ --with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
+ --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
+ --with-native-includes Use the system native include files instead of those
+ included with openbsm.
+ --with-pic[=PKGS] try to use only PIC/non-PIC objects [default=use
+ both]
+ --with-gnu-ld assume the C compiler uses GNU ld [default=no]
+ --with-sysroot=DIR Search for dependent libraries within DIR
+ (or the compiler's sysroot if not specified).
+
+Some influential environment variables:
+ CC C compiler command
+ CFLAGS C compiler flags
+ LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
+ nonstandard directory <lib dir>
+ LIBS libraries to pass to the linker, e.g. -l<library>
+ CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
+ you have headers in a nonstandard directory <include dir>
+ CPP C preprocessor
+ YACC The `Yet Another Compiler Compiler' implementation to use.
+ Defaults to the first program found out of: `bison -y', `byacc',
+ `yacc'.
+ YFLAGS The list of arguments that will be passed by default to $YACC.
+ This script will default YFLAGS to the empty string to avoid a
+ default value of `-d' given by some make applications.
+
+Use these variables to override the choices made by `configure' or to help
+it to find libraries and programs with nonstandard names/locations.
+
+Report bugs to <trustedbsd-audit at TrustedBSD.org>.
+_ACEOF
+ac_status=$?
+fi
+
+if test "$ac_init_help" = "recursive"; then
+ # If there are subdirs, report their specific --help.
+ for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
+ test -d "$ac_dir" ||
+ { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
+ continue
+ ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+ ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+ # A ".." for each directory in $ac_dir_suffix.
+ ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+ case $ac_top_builddir_sub in
+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+ esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+ .) # We are building in place.
+ ac_srcdir=.
+ ac_top_srcdir=$ac_top_builddir_sub
+ ac_abs_top_srcdir=$ac_pwd ;;
+ [\\/]* | ?:[\\/]* ) # Absolute name.
+ ac_srcdir=$srcdir$ac_dir_suffix;
+ ac_top_srcdir=$srcdir
+ ac_abs_top_srcdir=$srcdir ;;
+ *) # Relative name.
+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_build_prefix$srcdir
+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+ cd "$ac_dir" || { ac_status=$?; continue; }
+ # Check for guested configure.
+ if test -f "$ac_srcdir/configure.gnu"; then
+ echo &&
+ $SHELL "$ac_srcdir/configure.gnu" --help=recursive
+ elif test -f "$ac_srcdir/configure"; then
+ echo &&
+ $SHELL "$ac_srcdir/configure" --help=recursive
+ else
+ $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+ fi || ac_status=$?
+ cd "$ac_pwd" || { ac_status=$?; break; }
+ done
+fi
+
+test -n "$ac_init_help" && exit $ac_status
+if $ac_init_version; then
+ cat <<\_ACEOF
+OpenBSM configure 1.2-alpha4
+generated by GNU Autoconf 2.69
+
+Copyright (C) 2012 Free Software Foundation, Inc.
+This configure script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it.
+_ACEOF
+ exit
+fi
+
+## ------------------------ ##
+## Autoconf initialization. ##
+## ------------------------ ##
+
+# ac_fn_c_try_compile LINENO
+# --------------------------
+# Try to compile conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_compile ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ rm -f conftest.$ac_objext
+ if { { ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_compile") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=1
+fi
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+ as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_compile
+
+# ac_fn_c_try_link LINENO
+# -----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_link ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ rm -f conftest.$ac_objext conftest$ac_exeext
+ if { { ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest$ac_exeext && {
+ test "$cross_compiling" = yes ||
+ test -x conftest$ac_exeext
+ }; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=1
+fi
+ # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
+ # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
+ # interfere with the next link command; also delete a directory that is
+ # left behind by Apple's compiler. We do this before executing the actions.
+ rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+ as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_link
+
+# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES
+# -------------------------------------------------------
+# Tests whether HEADER exists and can be compiled using the include files in
+# INCLUDES, setting the cache variable VAR accordingly.
+ac_fn_c_check_header_compile ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$4
+#include <$2>
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ eval "$3=yes"
+else
+ eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_header_compile
+
+# ac_fn_c_try_cpp LINENO
+# ----------------------
+# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_cpp ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ if { { ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } > conftest.i && {
+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ }; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=1
+fi
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+ as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_cpp
+
+# ac_fn_c_try_run LINENO
+# ----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes
+# that executables *can* be run.
+ac_fn_c_try_run ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ if { { ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && { ac_try='./conftest$ac_exeext'
+ { { case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_try") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: program exited with status $ac_status" >&5
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=$ac_status
+fi
+ rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+ as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_run
+
+# ac_fn_c_check_func LINENO FUNC VAR
+# ----------------------------------
+# Tests whether FUNC exists, setting the cache variable VAR accordingly
+ac_fn_c_check_func ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+/* Define $2 to an innocuous variant, in case <limits.h> declares $2.
+ For example, HP-UX 11i <limits.h> declares gettimeofday. */
+#define $2 innocuous_$2
+
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $2 (); below.
+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ <limits.h> exists even on freestanding compilers. */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef $2
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char $2 ();
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined __stub_$2 || defined __stub___$2
+choke me
+#endif
+
+int
+main ()
+{
+return $2 ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ eval "$3=yes"
+else
+ eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_func
+
+# ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES
+# -------------------------------------------------------
+# Tests whether HEADER exists, giving a warning if it cannot be compiled using
+# the include files in INCLUDES and setting the cache variable VAR
+# accordingly.
+ac_fn_c_check_header_mongrel ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ if eval \${$3+:} false; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+ $as_echo_n "(cached) " >&6
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+else
+ # Is the header compilable?
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5
+$as_echo_n "checking $2 usability... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$4
+#include <$2>
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_header_compiler=yes
+else
+ ac_header_compiler=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5
+$as_echo "$ac_header_compiler" >&6; }
+
+# Is the header present?
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5
+$as_echo_n "checking $2 presence... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <$2>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+ ac_header_preproc=yes
+else
+ ac_header_preproc=no
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5
+$as_echo "$ac_header_preproc" >&6; }
+
+# So? What about this header?
+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #((
+ yes:no: )
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5
+$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
+$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
+ ;;
+ no:yes:* )
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5
+$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: check for missing prerequisite headers?" >&5
+$as_echo "$as_me: WARNING: $2: check for missing prerequisite headers?" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5
+$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&5
+$as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
+$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
+( $as_echo "## ---------------------------------------------- ##
+## Report this to trustedbsd-audit at TrustedBSD.org ##
+## ---------------------------------------------- ##"
+ ) | sed "s/^/$as_me: WARNING: /" >&2
+ ;;
+esac
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ eval "$3=\$ac_header_compiler"
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+fi
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_header_mongrel
+
+# ac_fn_c_check_type LINENO TYPE VAR INCLUDES
+# -------------------------------------------
+# Tests whether TYPE exists after having included INCLUDES, setting cache
+# variable VAR accordingly.
+ac_fn_c_check_type ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ eval "$3=no"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$4
+int
+main ()
+{
+if (sizeof ($2))
+ return 0;
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$4
+int
+main ()
+{
+if (sizeof (($2)))
+ return 0;
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+else
+ eval "$3=yes"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_type
+
+# ac_fn_c_check_member LINENO AGGR MEMBER VAR INCLUDES
+# ----------------------------------------------------
+# Tries to find if the field MEMBER exists in type AGGR, after including
+# INCLUDES, setting cache variable VAR accordingly.
+ac_fn_c_check_member ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2.$3" >&5
+$as_echo_n "checking for $2.$3... " >&6; }
+if eval \${$4+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$5
+int
+main ()
+{
+static $2 ac_aggr;
+if (ac_aggr.$3)
+return 0;
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ eval "$4=yes"
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$5
+int
+main ()
+{
+static $2 ac_aggr;
+if (sizeof ac_aggr.$3)
+return 0;
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ eval "$4=yes"
+else
+ eval "$4=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$4
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_member
+cat >config.log <<_ACEOF
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+
+It was created by OpenBSM $as_me 1.2-alpha4, which was
+generated by GNU Autoconf 2.69. Invocation command line was
+
+ $ $0 $@
+
+_ACEOF
+exec 5>>config.log
+{
+cat <<_ASUNAME
+## --------- ##
+## Platform. ##
+## --------- ##
+
+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
+/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
+
+/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
+/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
+/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown`
+/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
+/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
+/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
+
+_ASUNAME
+
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ $as_echo "PATH: $as_dir"
+ done
+IFS=$as_save_IFS
+
+} >&5
+
+cat >&5 <<_ACEOF
+
+
+## ----------- ##
+## Core tests. ##
+## ----------- ##
+
+_ACEOF
+
+
+# Keep a trace of the command line.
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Strip out --silent because we don't want to record it for future runs.
+# Also quote any args containing shell meta-characters.
+# Make two passes to allow for proper duplicate-argument suppression.
+ac_configure_args=
+ac_configure_args0=
+ac_configure_args1=
+ac_must_keep_next=false
+for ac_pass in 1 2
+do
+ for ac_arg
+ do
+ case $ac_arg in
+ -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil)
+ continue ;;
+ *\'*)
+ ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ esac
+ case $ac_pass in
+ 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
+ 2)
+ as_fn_append ac_configure_args1 " '$ac_arg'"
+ if test $ac_must_keep_next = true; then
+ ac_must_keep_next=false # Got value, back to normal.
+ else
+ case $ac_arg in
+ *=* | --config-cache | -C | -disable-* | --disable-* \
+ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
+ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
+ | -with-* | --with-* | -without-* | --without-* | --x)
+ case "$ac_configure_args0 " in
+ "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
+ esac
+ ;;
+ -* ) ac_must_keep_next=true ;;
+ esac
+ fi
+ as_fn_append ac_configure_args " '$ac_arg'"
+ ;;
+ esac
+ done
+done
+{ ac_configure_args0=; unset ac_configure_args0;}
+{ ac_configure_args1=; unset ac_configure_args1;}
+
+# When interrupted or exit'd, cleanup temporary files, and complete
+# config.log. We remove comments because anyway the quotes in there
+# would cause problems or look ugly.
+# WARNING: Use '\'' to represent an apostrophe within the trap.
+# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
+trap 'exit_status=$?
+ # Save into config.log some information that might help in debugging.
+ {
+ echo
+
+ $as_echo "## ---------------- ##
+## Cache variables. ##
+## ---------------- ##"
+ echo
+ # The following way of writing the cache mishandles newlines in values,
+(
+ for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
+ eval ac_val=\$$ac_var
+ case $ac_val in #(
+ *${as_nl}*)
+ case $ac_var in #(
+ *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+ esac
+ case $ac_var in #(
+ _ | IFS | as_nl) ;; #(
+ BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+ *) { eval $ac_var=; unset $ac_var;} ;;
+ esac ;;
+ esac
+ done
+ (set) 2>&1 |
+ case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
+ *${as_nl}ac_space=\ *)
+ sed -n \
+ "s/'\''/'\''\\\\'\'''\''/g;
+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
+ ;; #(
+ *)
+ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+ ;;
+ esac |
+ sort
+)
+ echo
+
+ $as_echo "## ----------------- ##
+## Output variables. ##
+## ----------------- ##"
+ echo
+ for ac_var in $ac_subst_vars
+ do
+ eval ac_val=\$$ac_var
+ case $ac_val in
+ *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+ esac
+ $as_echo "$ac_var='\''$ac_val'\''"
+ done | sort
+ echo
+
+ if test -n "$ac_subst_files"; then
+ $as_echo "## ------------------- ##
+## File substitutions. ##
+## ------------------- ##"
+ echo
+ for ac_var in $ac_subst_files
+ do
+ eval ac_val=\$$ac_var
+ case $ac_val in
+ *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+ esac
+ $as_echo "$ac_var='\''$ac_val'\''"
+ done | sort
+ echo
+ fi
+
+ if test -s confdefs.h; then
+ $as_echo "## ----------- ##
+## confdefs.h. ##
+## ----------- ##"
+ echo
+ cat confdefs.h
+ echo
+ fi
+ test "$ac_signal" != 0 &&
+ $as_echo "$as_me: caught signal $ac_signal"
+ $as_echo "$as_me: exit $exit_status"
+ } >&5
+ rm -f core *.core core.conftest.* &&
+ rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
+ exit $exit_status
+' 0
+for ac_signal in 1 2 13 15; do
+ trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
+done
+ac_signal=0
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -f -r conftest* confdefs.h
+
+$as_echo "/* confdefs.h */" > confdefs.h
+
+# Predefined preprocessor variables.
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_NAME "$PACKAGE_NAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_VERSION "$PACKAGE_VERSION"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_STRING "$PACKAGE_STRING"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_URL "$PACKAGE_URL"
+_ACEOF
+
+
+# Let the site file select an alternate cache file if it wants to.
+# Prefer an explicitly selected file to automatically selected ones.
+ac_site_file1=NONE
+ac_site_file2=NONE
+if test -n "$CONFIG_SITE"; then
+ # We do not want a PATH search for config.site.
+ case $CONFIG_SITE in #((
+ -*) ac_site_file1=./$CONFIG_SITE;;
+ */*) ac_site_file1=$CONFIG_SITE;;
+ *) ac_site_file1=./$CONFIG_SITE;;
+ esac
+elif test "x$prefix" != xNONE; then
+ ac_site_file1=$prefix/share/config.site
+ ac_site_file2=$prefix/etc/config.site
+else
+ ac_site_file1=$ac_default_prefix/share/config.site
+ ac_site_file2=$ac_default_prefix/etc/config.site
+fi
+for ac_site_file in "$ac_site_file1" "$ac_site_file2"
+do
+ test "x$ac_site_file" = xNONE && continue
+ if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
+$as_echo "$as_me: loading site script $ac_site_file" >&6;}
+ sed 's/^/| /' "$ac_site_file" >&5
+ . "$ac_site_file" \
+ || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "failed to load site script $ac_site_file
+See \`config.log' for more details" "$LINENO" 5; }
+ fi
+done
+
+if test -r "$cache_file"; then
+ # Some versions of bash will fail to source /dev/null (special files
+ # actually), so we avoid doing that. DJGPP emulates it as a regular file.
+ if test /dev/null != "$cache_file" && test -f "$cache_file"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
+$as_echo "$as_me: loading cache $cache_file" >&6;}
+ case $cache_file in
+ [\\/]* | ?:[\\/]* ) . "$cache_file";;
+ *) . "./$cache_file";;
+ esac
+ fi
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
+$as_echo "$as_me: creating cache $cache_file" >&6;}
+ >$cache_file
+fi
+
+as_fn_append ac_header_list " sys/time.h"
+as_fn_append ac_header_list " unistd.h"
+as_fn_append ac_func_list " alarm"
+# Check that the precious variables saved in the cache have kept the same
+# value.
+ac_cache_corrupted=false
+for ac_var in $ac_precious_vars; do
+ eval ac_old_set=\$ac_cv_env_${ac_var}_set
+ eval ac_new_set=\$ac_env_${ac_var}_set
+ eval ac_old_val=\$ac_cv_env_${ac_var}_value
+ eval ac_new_val=\$ac_env_${ac_var}_value
+ case $ac_old_set,$ac_new_set in
+ set,)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+ ac_cache_corrupted=: ;;
+ ,set)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+ ac_cache_corrupted=: ;;
+ ,);;
+ *)
+ if test "x$ac_old_val" != "x$ac_new_val"; then
+ # differences in whitespace do not lead to failure.
+ ac_old_val_w=`echo x $ac_old_val`
+ ac_new_val_w=`echo x $ac_new_val`
+ if test "$ac_old_val_w" != "$ac_new_val_w"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5
+$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+ ac_cache_corrupted=:
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
+$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
+ eval $ac_var=\$ac_old_val
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5
+$as_echo "$as_me: former value: \`$ac_old_val'" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5
+$as_echo "$as_me: current value: \`$ac_new_val'" >&2;}
+ fi;;
+ esac
+ # Pass precious variables to config.status.
+ if test "$ac_new_set" = set; then
+ case $ac_new_val in
+ *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+ *) ac_arg=$ac_var=$ac_new_val ;;
+ esac
+ case " $ac_configure_args " in
+ *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
+ *) as_fn_append ac_configure_args " '$ac_arg'" ;;
+ esac
+ fi
+done
+if $ac_cache_corrupted; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
+$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+ as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
+fi
+## -------------------- ##
+## Main body of script. ##
+## -------------------- ##
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+
+
+ac_aux_dir=
+for ac_dir in config "$srcdir"/config; do
+ if test -f "$ac_dir/install-sh"; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install-sh -c"
+ break
+ elif test -f "$ac_dir/install.sh"; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install.sh -c"
+ break
+ elif test -f "$ac_dir/shtool"; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/shtool install -c"
+ break
+ fi
+done
+if test -z "$ac_aux_dir"; then
+ as_fn_error $? "cannot find install-sh, install.sh, or shtool in config \"$srcdir\"/config" "$LINENO" 5
+fi
+
+# These three variables are undocumented and unsupported,
+# and are intended to be withdrawn in a future Autoconf release.
+# They can cause serious problems if a builder's source tree is in a directory
+# whose full name contains unusual characters.
+ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var.
+ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var.
+ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var.
+
+
+
+ac_config_headers="$ac_config_headers config/config.h"
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable maintainer-specific portions of Makefiles" >&5
+$as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; }
+ # Check whether --enable-maintainer-mode was given.
+if test "${enable_maintainer_mode+set}" = set; then :
+ enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval
+else
+ USE_MAINTAINER_MODE=no
+fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_MAINTAINER_MODE" >&5
+$as_echo "$USE_MAINTAINER_MODE" >&6; }
+ if test $USE_MAINTAINER_MODE = yes; then
+ MAINTAINER_MODE_TRUE=
+ MAINTAINER_MODE_FALSE='#'
+else
+ MAINTAINER_MODE_TRUE='#'
+ MAINTAINER_MODE_FALSE=
+fi
+
+ MAINT=$MAINTAINER_MODE_TRUE
+
+
+
+# --with-native-includes forces the use of the system bsm headers.
+
+# Check whether --with-native-includes was given.
+if test "${with_native_includes+set}" = set; then :
+ withval=$with_native_includes;
+
+$as_echo "#define USE_NATIVE_INCLUDES /**/" >>confdefs.h
+
+use_native_includes=true
+
+else
+ use_native_includes=false
+fi
+
+ if $use_native_includes; then
+ USE_NATIVE_INCLUDES_TRUE=
+ USE_NATIVE_INCLUDES_FALSE='#'
+else
+ USE_NATIVE_INCLUDES_TRUE='#'
+ USE_NATIVE_INCLUDES_FALSE=
+fi
+
+
+for ac_prog in mig
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_MIG+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $MIG in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_MIG="$MIG" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_path_MIG="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+MIG=$ac_cv_path_MIG
+if test -n "$MIG"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MIG" >&5
+$as_echo "$MIG" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$MIG" && break
+done
+
+
+# Checks for programs.
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CC="${ac_tool_prefix}gcc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_CC"; then
+ ac_ct_CC=$CC
+ # Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_CC"; then
+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_CC="gcc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_CC" = x; then
+ CC=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ CC=$ac_ct_CC
+ fi
+else
+ CC="$ac_cv_prog_CC"
+fi
+
+if test -z "$CC"; then
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CC="${ac_tool_prefix}cc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ fi
+fi
+if test -z "$CC"; then
+ # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ ac_prog_rejected=no
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
+ ac_prog_rejected=yes
+ continue
+ fi
+ ac_cv_prog_CC="cc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+if test $ac_prog_rejected = yes; then
+ # We found a bogon in the path, so make sure we never use it.
+ set dummy $ac_cv_prog_CC
+ shift
+ if test $# != 0; then
+ # We chose a different compiler from the bogus one.
+ # However, it has the same basename, so the bogon will be chosen
+ # first if we set CC to just the basename; use the full file name.
+ shift
+ ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
+ fi
+fi
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$CC"; then
+ if test -n "$ac_tool_prefix"; then
+ for ac_prog in cl.exe
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$CC" && break
+ done
+fi
+if test -z "$CC"; then
+ ac_ct_CC=$CC
+ for ac_prog in cl.exe
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_CC"; then
+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_CC="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$ac_ct_CC" && break
+done
+
+ if test "x$ac_ct_CC" = x; then
+ CC=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ CC=$ac_ct_CC
+ fi
+fi
+
+fi
+
+
+test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "no acceptable C compiler found in \$PATH
+See \`config.log' for more details" "$LINENO" 5; }
+
+# Provide some information about the compiler.
+$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
+set X $ac_compile
+ac_compiler=$2
+for ac_option in --version -v -V -qversion; do
+ { { ac_try="$ac_compiler $ac_option >&5"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_compiler $ac_option >&5") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ sed '10a\
+... rest of stderr output deleted ...
+ 10q' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ fi
+ rm -f conftest.er1 conftest.err
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+done
+
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out"
+# Try to create an executable without -o first, disregard a.out.
+# It will help us diagnose broken compilers, and finding out an intuition
+# of exeext.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5
+$as_echo_n "checking whether the C compiler works... " >&6; }
+ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
+
+# The possible output files:
+ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*"
+
+ac_rmfiles=
+for ac_file in $ac_files
+do
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+ * ) ac_rmfiles="$ac_rmfiles $ac_file";;
+ esac
+done
+rm -f $ac_rmfiles
+
+if { { ac_try="$ac_link_default"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link_default") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then :
+ # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
+# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
+# in a Makefile. We should not override ac_cv_exeext if it was cached,
+# so that the user can short-circuit this test for compilers unknown to
+# Autoconf.
+for ac_file in $ac_files ''
+do
+ test -f "$ac_file" || continue
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj )
+ ;;
+ [ab].out )
+ # We found the default executable, but exeext='' is most
+ # certainly right.
+ break;;
+ *.* )
+ if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
+ then :; else
+ ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+ fi
+ # We set ac_cv_exeext here because the later test for it is not
+ # safe: cross compilers may not add the suffix if given an `-o'
+ # argument, so we may need to know it at that point already.
+ # Even if this section looks crufty: it has the advantage of
+ # actually working.
+ break;;
+ * )
+ break;;
+ esac
+done
+test "$ac_cv_exeext" = no && ac_cv_exeext=
+
+else
+ ac_file=''
+fi
+if test -z "$ac_file"; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+$as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error 77 "C compiler cannot create executables
+See \`config.log' for more details" "$LINENO" 5; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5
+$as_echo_n "checking for C compiler default output file name... " >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5
+$as_echo "$ac_file" >&6; }
+ac_exeext=$ac_cv_exeext
+
+rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out
+ac_clean_files=$ac_clean_files_save
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5
+$as_echo_n "checking for suffix of executables... " >&6; }
+if { { ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then :
+ # If both `conftest.exe' and `conftest' are `present' (well, observable)
+# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will
+# work properly (i.e., refer to `conftest.exe'), while it won't with
+# `rm'.
+for ac_file in conftest.exe conftest conftest.*; do
+ test -f "$ac_file" || continue
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+ *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+ break;;
+ * ) break;;
+ esac
+done
+else
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+rm -f conftest conftest$ac_cv_exeext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
+$as_echo "$ac_cv_exeext" >&6; }
+
+rm -f conftest.$ac_ext
+EXEEXT=$ac_cv_exeext
+ac_exeext=$EXEEXT
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <stdio.h>
+int
+main ()
+{
+FILE *f = fopen ("conftest.out", "w");
+ return ferror (f) || fclose (f) != 0;
+
+ ;
+ return 0;
+}
+_ACEOF
+ac_clean_files="$ac_clean_files conftest.out"
+# Check that the compiler produces executables we can run. If not, either
+# the compiler is broken, or we cross compile.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
+$as_echo_n "checking whether we are cross compiling... " >&6; }
+if test "$cross_compiling" != yes; then
+ { { ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+ if { ac_try='./conftest$ac_cv_exeext'
+ { { case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_try") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }; then
+ cross_compiling=no
+ else
+ if test "$cross_compiling" = maybe; then
+ cross_compiling=yes
+ else
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot run C compiled programs.
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details" "$LINENO" 5; }
+ fi
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
+$as_echo "$cross_compiling" >&6; }
+
+rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out
+ac_clean_files=$ac_clean_files_save
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
+$as_echo_n "checking for suffix of object files... " >&6; }
+if ${ac_cv_objext+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.o conftest.obj
+if { { ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_compile") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then :
+ for ac_file in conftest.o conftest.obj conftest.*; do
+ test -f "$ac_file" || continue;
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
+ *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
+ break;;
+ esac
+done
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot compute suffix of object files: cannot compile
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+rm -f conftest.$ac_cv_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5
+$as_echo "$ac_cv_objext" >&6; }
+OBJEXT=$ac_cv_objext
+ac_objext=$OBJEXT
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
+$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
+if ${ac_cv_c_compiler_gnu+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+#ifndef __GNUC__
+ choke me
+#endif
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_compiler_gnu=yes
+else
+ ac_compiler_gnu=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_c_compiler_gnu=$ac_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
+$as_echo "$ac_cv_c_compiler_gnu" >&6; }
+if test $ac_compiler_gnu = yes; then
+ GCC=yes
+else
+ GCC=
+fi
+ac_test_CFLAGS=${CFLAGS+set}
+ac_save_CFLAGS=$CFLAGS
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
+$as_echo_n "checking whether $CC accepts -g... " >&6; }
+if ${ac_cv_prog_cc_g+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_save_c_werror_flag=$ac_c_werror_flag
+ ac_c_werror_flag=yes
+ ac_cv_prog_cc_g=no
+ CFLAGS="-g"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_prog_cc_g=yes
+else
+ CFLAGS=""
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+else
+ ac_c_werror_flag=$ac_save_c_werror_flag
+ CFLAGS="-g"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_prog_cc_g=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ ac_c_werror_flag=$ac_save_c_werror_flag
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
+$as_echo "$ac_cv_prog_cc_g" >&6; }
+if test "$ac_test_CFLAGS" = set; then
+ CFLAGS=$ac_save_CFLAGS
+elif test $ac_cv_prog_cc_g = yes; then
+ if test "$GCC" = yes; then
+ CFLAGS="-g -O2"
+ else
+ CFLAGS="-g"
+ fi
+else
+ if test "$GCC" = yes; then
+ CFLAGS="-O2"
+ else
+ CFLAGS=
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
+$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
+if ${ac_cv_prog_cc_c89+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_cv_prog_cc_c89=no
+ac_save_CC=$CC
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <stdarg.h>
+#include <stdio.h>
+struct stat;
+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
+struct buf { int x; };
+FILE * (*rcsopen) (struct buf *, struct stat *, int);
+static char *e (p, i)
+ char **p;
+ int i;
+{
+ return p[i];
+}
+static char *f (char * (*g) (char **, int), char **p, ...)
+{
+ char *s;
+ va_list v;
+ va_start (v,p);
+ s = g (p, va_arg (v,int));
+ va_end (v);
+ return s;
+}
+
+/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
+ function prototypes and stuff, but not '\xHH' hex character constants.
+ These don't provoke an error unfortunately, instead are silently treated
+ as 'x'. The following induces an error, until -std is added to get
+ proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
+ array size at least. It's necessary to write '\x00'==0 to get something
+ that's true only with -std. */
+int osf4_cc_array ['\x00' == 0 ? 1 : -1];
+
+/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
+ inside strings and character constants. */
+#define FOO(x) 'x'
+int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
+
+int test (int i, double x);
+struct s1 {int (*f) (int a);};
+struct s2 {int (*f) (double a);};
+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
+int argc;
+char **argv;
+int
+main ()
+{
+return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
+ ;
+ return 0;
+}
+_ACEOF
+for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
+ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+do
+ CC="$ac_save_CC $ac_arg"
+ if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_prog_cc_c89=$ac_arg
+fi
+rm -f core conftest.err conftest.$ac_objext
+ test "x$ac_cv_prog_cc_c89" != "xno" && break
+done
+rm -f conftest.$ac_ext
+CC=$ac_save_CC
+
+fi
+# AC_CACHE_VAL
+case "x$ac_cv_prog_cc_c89" in
+ x)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
+$as_echo "none needed" >&6; } ;;
+ xno)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
+$as_echo "unsupported" >&6; } ;;
+ *)
+ CC="$CC $ac_cv_prog_cc_c89"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
+$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
+esac
+if test "x$ac_cv_prog_cc_c89" != xno; then :
+
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+# Find a good install program. We prefer a C program (faster),
+# so one script is as good as another. But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AmigaOS /C/install, which installs bootblocks on floppy discs
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# OS/2's system install, which has a completely different semantic
+# ./install, which can be erroneously created by make from ./install.sh.
+# Reject install programs that cannot install multiple files.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5
+$as_echo_n "checking for a BSD-compatible install... " >&6; }
+if test -z "$INSTALL"; then
+if ${ac_cv_path_install+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ # Account for people who put trailing slashes in PATH elements.
+case $as_dir/ in #((
+ ./ | .// | /[cC]/* | \
+ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
+ ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \
+ /usr/ucb/* ) ;;
+ *)
+ # OSF1 and SCO ODT 3.0 have their own names for install.
+ # Don't use installbsd from OSF since it installs stuff as root
+ # by default.
+ for ac_prog in ginstall scoinst install; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
+ if test $ac_prog = install &&
+ grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+ # AIX install. It has an incompatible calling convention.
+ :
+ elif test $ac_prog = install &&
+ grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+ # program-specific install script used by HP pwplus--don't use.
+ :
+ else
+ rm -rf conftest.one conftest.two conftest.dir
+ echo one > conftest.one
+ echo two > conftest.two
+ mkdir conftest.dir
+ if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
+ test -s conftest.one && test -s conftest.two &&
+ test -s conftest.dir/conftest.one &&
+ test -s conftest.dir/conftest.two
+ then
+ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+ break 3
+ fi
+ fi
+ fi
+ done
+ done
+ ;;
+esac
+
+ done
+IFS=$as_save_IFS
+
+rm -rf conftest.one conftest.two conftest.dir
+
+fi
+ if test "${ac_cv_path_install+set}" = set; then
+ INSTALL=$ac_cv_path_install
+ else
+ # As a last resort, use the slow shell script. Don't cache a
+ # value for INSTALL within a source directory, because that will
+ # break other packages using the cache if that directory is
+ # removed, or if the value is a relative name.
+ INSTALL=$ac_install_sh
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5
+$as_echo "$INSTALL" >&6; }
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+
+for ac_prog in flex lex
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_LEX+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$LEX"; then
+ ac_cv_prog_LEX="$LEX" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_LEX="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+LEX=$ac_cv_prog_LEX
+if test -n "$LEX"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LEX" >&5
+$as_echo "$LEX" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$LEX" && break
+done
+test -n "$LEX" || LEX=":"
+
+if test "x$LEX" != "x:"; then
+ cat >conftest.l <<_ACEOF
+%%
+a { ECHO; }
+b { REJECT; }
+c { yymore (); }
+d { yyless (1); }
+e { /* IRIX 6.5 flex 2.5.4 underquotes its yyless argument. */
+ yyless ((input () != 0)); }
+f { unput (yytext[0]); }
+. { BEGIN INITIAL; }
+%%
+#ifdef YYTEXT_POINTER
+extern char *yytext;
+#endif
+int
+main (void)
+{
+ return ! yylex () + ! yywrap ();
+}
+_ACEOF
+{ { ac_try="$LEX conftest.l"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$LEX conftest.l") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking lex output file root" >&5
+$as_echo_n "checking lex output file root... " >&6; }
+if ${ac_cv_prog_lex_root+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+
+if test -f lex.yy.c; then
+ ac_cv_prog_lex_root=lex.yy
+elif test -f lexyy.c; then
+ ac_cv_prog_lex_root=lexyy
+else
+ as_fn_error $? "cannot find output from $LEX; giving up" "$LINENO" 5
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_lex_root" >&5
+$as_echo "$ac_cv_prog_lex_root" >&6; }
+LEX_OUTPUT_ROOT=$ac_cv_prog_lex_root
+
+if test -z "${LEXLIB+set}"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking lex library" >&5
+$as_echo_n "checking lex library... " >&6; }
+if ${ac_cv_lib_lex+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+
+ ac_save_LIBS=$LIBS
+ ac_cv_lib_lex='none needed'
+ for ac_lib in '' -lfl -ll; do
+ LIBS="$ac_lib $ac_save_LIBS"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+`cat $LEX_OUTPUT_ROOT.c`
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_lex=$ac_lib
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ test "$ac_cv_lib_lex" != 'none needed' && break
+ done
+ LIBS=$ac_save_LIBS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_lex" >&5
+$as_echo "$ac_cv_lib_lex" >&6; }
+ test "$ac_cv_lib_lex" != 'none needed' && LEXLIB=$ac_cv_lib_lex
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether yytext is a pointer" >&5
+$as_echo_n "checking whether yytext is a pointer... " >&6; }
+if ${ac_cv_prog_lex_yytext_pointer+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ # POSIX says lex can declare yytext either as a pointer or an array; the
+# default is implementation-dependent. Figure out which it is, since
+# not all implementations provide the %pointer and %array declarations.
+ac_cv_prog_lex_yytext_pointer=no
+ac_save_LIBS=$LIBS
+LIBS="$LEXLIB $ac_save_LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+ #define YYTEXT_POINTER 1
+`cat $LEX_OUTPUT_ROOT.c`
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_prog_lex_yytext_pointer=yes
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_save_LIBS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_lex_yytext_pointer" >&5
+$as_echo "$ac_cv_prog_lex_yytext_pointer" >&6; }
+if test $ac_cv_prog_lex_yytext_pointer = yes; then
+
+$as_echo "#define YYTEXT_POINTER 1" >>confdefs.h
+
+fi
+rm -f conftest.l $LEX_OUTPUT_ROOT.c
+
+fi
+case `pwd` in
+ *\ * | *\ *)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5
+$as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;;
+esac
+
+
+
+macro_version='2.4.2'
+macro_revision='1.3337'
+
+
+
+
+
+
+
+
+
+
+
+
+
+ltmain="$ac_aux_dir/ltmain.sh"
+
+# Make sure we can run config.sub.
+$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
+ as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
+$as_echo_n "checking build system type... " >&6; }
+if ${ac_cv_build+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_build_alias=$build_alias
+test "x$ac_build_alias" = x &&
+ ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
+test "x$ac_build_alias" = x &&
+ as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5
+ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
+ as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
+$as_echo "$ac_cv_build" >&6; }
+case $ac_cv_build in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;;
+esac
+build=$ac_cv_build
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_build
+shift
+build_cpu=$1
+build_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+build_os=$*
+IFS=$ac_save_IFS
+case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5
+$as_echo_n "checking host system type... " >&6; }
+if ${ac_cv_host+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test "x$host_alias" = x; then
+ ac_cv_host=$ac_cv_build
+else
+ ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
+ as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5
+$as_echo "$ac_cv_host" >&6; }
+case $ac_cv_host in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;;
+esac
+host=$ac_cv_host
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_host
+shift
+host_cpu=$1
+host_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+host_os=$*
+IFS=$ac_save_IFS
+case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
+
+
+# Backslashify metacharacters that are still active within
+# double-quoted strings.
+sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\(["`\\]\)/\\\1/g'
+
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+# Sed substitution to delay expansion of an escaped single quote.
+delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
+
+# Sed substitution to avoid accidental globbing in evaled expressions
+no_glob_subst='s/\*/\\\*/g'
+
+ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5
+$as_echo_n "checking how to print strings... " >&6; }
+# Test print first, because it will be a builtin if present.
+if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \
+ test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
+ ECHO='print -r --'
+elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
+ ECHO='printf %s\n'
+else
+ # Use this function as a fallback that always works.
+ func_fallback_echo ()
+ {
+ eval 'cat <<_LTECHO_EOF
+$1
+_LTECHO_EOF'
+ }
+ ECHO='func_fallback_echo'
+fi
+
+# func_echo_all arg...
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+ $ECHO ""
+}
+
+case "$ECHO" in
+ printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5
+$as_echo "printf" >&6; } ;;
+ print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5
+$as_echo "print -r" >&6; } ;;
+ *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: cat" >&5
+$as_echo "cat" >&6; } ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5
+$as_echo_n "checking for a sed that does not truncate output... " >&6; }
+if ${ac_cv_path_SED+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
+ for ac_i in 1 2 3 4 5 6 7; do
+ ac_script="$ac_script$as_nl$ac_script"
+ done
+ echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed
+ { ac_script=; unset ac_script;}
+ if test -z "$SED"; then
+ ac_path_SED_found=false
+ # Loop through the user's path and test for each of PROGNAME-LIST
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in sed gsed; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ ac_path_SED="$as_dir/$ac_prog$ac_exec_ext"
+ as_fn_executable_p "$ac_path_SED" || continue
+# Check for GNU ac_path_SED and select it if it is found.
+ # Check for GNU $ac_path_SED
+case `"$ac_path_SED" --version 2>&1` in
+*GNU*)
+ ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;;
+*)
+ ac_count=0
+ $as_echo_n 0123456789 >"conftest.in"
+ while :
+ do
+ cat "conftest.in" "conftest.in" >"conftest.tmp"
+ mv "conftest.tmp" "conftest.in"
+ cp "conftest.in" "conftest.nl"
+ $as_echo '' >> "conftest.nl"
+ "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break
+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+ as_fn_arith $ac_count + 1 && ac_count=$as_val
+ if test $ac_count -gt ${ac_path_SED_max-0}; then
+ # Best one so far, save it but keep looking for a better one
+ ac_cv_path_SED="$ac_path_SED"
+ ac_path_SED_max=$ac_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test $ac_count -gt 10 && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+ $ac_path_SED_found && break 3
+ done
+ done
+ done
+IFS=$as_save_IFS
+ if test -z "$ac_cv_path_SED"; then
+ as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5
+ fi
+else
+ ac_cv_path_SED=$SED
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5
+$as_echo "$ac_cv_path_SED" >&6; }
+ SED="$ac_cv_path_SED"
+ rm -f conftest.sed
+
+test -z "$SED" && SED=sed
+Xsed="$SED -e 1s/^X//"
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5
+$as_echo_n "checking for grep that handles long lines and -e... " >&6; }
+if ${ac_cv_path_GREP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -z "$GREP"; then
+ ac_path_GREP_found=false
+ # Loop through the user's path and test for each of PROGNAME-LIST
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in grep ggrep; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
+ as_fn_executable_p "$ac_path_GREP" || continue
+# Check for GNU ac_path_GREP and select it if it is found.
+ # Check for GNU $ac_path_GREP
+case `"$ac_path_GREP" --version 2>&1` in
+*GNU*)
+ ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
+*)
+ ac_count=0
+ $as_echo_n 0123456789 >"conftest.in"
+ while :
+ do
+ cat "conftest.in" "conftest.in" >"conftest.tmp"
+ mv "conftest.tmp" "conftest.in"
+ cp "conftest.in" "conftest.nl"
+ $as_echo 'GREP' >> "conftest.nl"
+ "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+ as_fn_arith $ac_count + 1 && ac_count=$as_val
+ if test $ac_count -gt ${ac_path_GREP_max-0}; then
+ # Best one so far, save it but keep looking for a better one
+ ac_cv_path_GREP="$ac_path_GREP"
+ ac_path_GREP_max=$ac_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test $ac_count -gt 10 && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+ $ac_path_GREP_found && break 3
+ done
+ done
+ done
+IFS=$as_save_IFS
+ if test -z "$ac_cv_path_GREP"; then
+ as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+ fi
+else
+ ac_cv_path_GREP=$GREP
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5
+$as_echo "$ac_cv_path_GREP" >&6; }
+ GREP="$ac_cv_path_GREP"
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
+$as_echo_n "checking for egrep... " >&6; }
+if ${ac_cv_path_EGREP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
+ then ac_cv_path_EGREP="$GREP -E"
+ else
+ if test -z "$EGREP"; then
+ ac_path_EGREP_found=false
+ # Loop through the user's path and test for each of PROGNAME-LIST
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in egrep; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
+ as_fn_executable_p "$ac_path_EGREP" || continue
+# Check for GNU ac_path_EGREP and select it if it is found.
+ # Check for GNU $ac_path_EGREP
+case `"$ac_path_EGREP" --version 2>&1` in
+*GNU*)
+ ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
+*)
+ ac_count=0
+ $as_echo_n 0123456789 >"conftest.in"
+ while :
+ do
+ cat "conftest.in" "conftest.in" >"conftest.tmp"
+ mv "conftest.tmp" "conftest.in"
+ cp "conftest.in" "conftest.nl"
+ $as_echo 'EGREP' >> "conftest.nl"
+ "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+ as_fn_arith $ac_count + 1 && ac_count=$as_val
+ if test $ac_count -gt ${ac_path_EGREP_max-0}; then
+ # Best one so far, save it but keep looking for a better one
+ ac_cv_path_EGREP="$ac_path_EGREP"
+ ac_path_EGREP_max=$ac_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test $ac_count -gt 10 && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+ $ac_path_EGREP_found && break 3
+ done
+ done
+ done
+IFS=$as_save_IFS
+ if test -z "$ac_cv_path_EGREP"; then
+ as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+ fi
+else
+ ac_cv_path_EGREP=$EGREP
+fi
+
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5
+$as_echo "$ac_cv_path_EGREP" >&6; }
+ EGREP="$ac_cv_path_EGREP"
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5
+$as_echo_n "checking for fgrep... " >&6; }
+if ${ac_cv_path_FGREP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1
+ then ac_cv_path_FGREP="$GREP -F"
+ else
+ if test -z "$FGREP"; then
+ ac_path_FGREP_found=false
+ # Loop through the user's path and test for each of PROGNAME-LIST
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in fgrep; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext"
+ as_fn_executable_p "$ac_path_FGREP" || continue
+# Check for GNU ac_path_FGREP and select it if it is found.
+ # Check for GNU $ac_path_FGREP
+case `"$ac_path_FGREP" --version 2>&1` in
+*GNU*)
+ ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;;
+*)
+ ac_count=0
+ $as_echo_n 0123456789 >"conftest.in"
+ while :
+ do
+ cat "conftest.in" "conftest.in" >"conftest.tmp"
+ mv "conftest.tmp" "conftest.in"
+ cp "conftest.in" "conftest.nl"
+ $as_echo 'FGREP' >> "conftest.nl"
+ "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break
+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+ as_fn_arith $ac_count + 1 && ac_count=$as_val
+ if test $ac_count -gt ${ac_path_FGREP_max-0}; then
+ # Best one so far, save it but keep looking for a better one
+ ac_cv_path_FGREP="$ac_path_FGREP"
+ ac_path_FGREP_max=$ac_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test $ac_count -gt 10 && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+ $ac_path_FGREP_found && break 3
+ done
+ done
+ done
+IFS=$as_save_IFS
+ if test -z "$ac_cv_path_FGREP"; then
+ as_fn_error $? "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+ fi
+else
+ ac_cv_path_FGREP=$FGREP
+fi
+
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5
+$as_echo "$ac_cv_path_FGREP" >&6; }
+ FGREP="$ac_cv_path_FGREP"
+
+
+test -z "$GREP" && GREP=grep
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# Check whether --with-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then :
+ withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
+else
+ with_gnu_ld=no
+fi
+
+ac_prog=ld
+if test "$GCC" = yes; then
+ # Check if gcc -print-prog-name=ld gives a path.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5
+$as_echo_n "checking for ld used by $CC... " >&6; }
+ case $host in
+ *-*-mingw*)
+ # gcc leaves a trailing carriage return which upsets mingw
+ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+ *)
+ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+ esac
+ case $ac_prog in
+ # Accept absolute paths.
+ [\\/]* | ?:[\\/]*)
+ re_direlt='/[^/][^/]*/\.\./'
+ # Canonicalize the pathname of ld
+ ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
+ while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
+ ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
+ done
+ test -z "$LD" && LD="$ac_prog"
+ ;;
+ "")
+ # If it fails, then pretend we aren't using GCC.
+ ac_prog=ld
+ ;;
+ *)
+ # If it is relative, then search for the first ld in PATH.
+ with_gnu_ld=unknown
+ ;;
+ esac
+elif test "$with_gnu_ld" = yes; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
+$as_echo_n "checking for GNU ld... " >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
+$as_echo_n "checking for non-GNU ld... " >&6; }
+fi
+if ${lt_cv_path_LD+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -z "$LD"; then
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ for ac_dir in $PATH; do
+ IFS="$lt_save_ifs"
+ test -z "$ac_dir" && ac_dir=.
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+ lt_cv_path_LD="$ac_dir/$ac_prog"
+ # Check to see if the program is GNU ld. I'd rather use --version,
+ # but apparently some variants of GNU ld only accept -v.
+ # Break only if it was the GNU/non-GNU ld that we prefer.
+ case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
+ *GNU* | *'with BFD'*)
+ test "$with_gnu_ld" != no && break
+ ;;
+ *)
+ test "$with_gnu_ld" != yes && break
+ ;;
+ esac
+ fi
+ done
+ IFS="$lt_save_ifs"
+else
+ lt_cv_path_LD="$LD" # Let the user override the test with a path.
+fi
+fi
+
+LD="$lt_cv_path_LD"
+if test -n "$LD"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
+$as_echo "$LD" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
+$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
+if ${lt_cv_prog_gnu_ld+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ # I'd rather use --version here, but apparently some GNU lds only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+ lt_cv_prog_gnu_ld=yes
+ ;;
+*)
+ lt_cv_prog_gnu_ld=no
+ ;;
+esac
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_gnu_ld" >&5
+$as_echo "$lt_cv_prog_gnu_ld" >&6; }
+with_gnu_ld=$lt_cv_prog_gnu_ld
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5
+$as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; }
+if ${lt_cv_path_NM+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$NM"; then
+ # Let the user override the test.
+ lt_cv_path_NM="$NM"
+else
+ lt_nm_to_check="${ac_tool_prefix}nm"
+ if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+ lt_nm_to_check="$lt_nm_to_check nm"
+ fi
+ for lt_tmp_nm in $lt_nm_to_check; do
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+ IFS="$lt_save_ifs"
+ test -z "$ac_dir" && ac_dir=.
+ tmp_nm="$ac_dir/$lt_tmp_nm"
+ if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+ # Check to see if the nm accepts a BSD-compat flag.
+ # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+ # nm: unknown option "B" ignored
+ # Tru64's nm complains that /dev/null is an invalid object file
+ case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
+ */dev/null* | *'Invalid file or object type'*)
+ lt_cv_path_NM="$tmp_nm -B"
+ break
+ ;;
+ *)
+ case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
+ */dev/null*)
+ lt_cv_path_NM="$tmp_nm -p"
+ break
+ ;;
+ *)
+ lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+ continue # so that we can try to find one that supports BSD flags
+ ;;
+ esac
+ ;;
+ esac
+ fi
+ done
+ IFS="$lt_save_ifs"
+ done
+ : ${lt_cv_path_NM=no}
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5
+$as_echo "$lt_cv_path_NM" >&6; }
+if test "$lt_cv_path_NM" != "no"; then
+ NM="$lt_cv_path_NM"
+else
+ # Didn't find any BSD compatible name lister, look for dumpbin.
+ if test -n "$DUMPBIN"; then :
+ # Let the user override the test.
+ else
+ if test -n "$ac_tool_prefix"; then
+ for ac_prog in dumpbin "link -dump"
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DUMPBIN+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$DUMPBIN"; then
+ ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+DUMPBIN=$ac_cv_prog_DUMPBIN
+if test -n "$DUMPBIN"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5
+$as_echo "$DUMPBIN" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$DUMPBIN" && break
+ done
+fi
+if test -z "$DUMPBIN"; then
+ ac_ct_DUMPBIN=$DUMPBIN
+ for ac_prog in dumpbin "link -dump"
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DUMPBIN+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_DUMPBIN"; then
+ ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_DUMPBIN="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN
+if test -n "$ac_ct_DUMPBIN"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5
+$as_echo "$ac_ct_DUMPBIN" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$ac_ct_DUMPBIN" && break
+done
+
+ if test "x$ac_ct_DUMPBIN" = x; then
+ DUMPBIN=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ DUMPBIN=$ac_ct_DUMPBIN
+ fi
+fi
+
+ case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in
+ *COFF*)
+ DUMPBIN="$DUMPBIN -symbols"
+ ;;
+ *)
+ DUMPBIN=:
+ ;;
+ esac
+ fi
+
+ if test "$DUMPBIN" != ":"; then
+ NM="$DUMPBIN"
+ fi
+fi
+test -z "$NM" && NM=nm
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5
+$as_echo_n "checking the name lister ($NM) interface... " >&6; }
+if ${lt_cv_nm_interface+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_nm_interface="BSD nm"
+ echo "int some_variable = 0;" > conftest.$ac_ext
+ (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&5)
+ (eval "$ac_compile" 2>conftest.err)
+ cat conftest.err >&5
+ (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
+ (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
+ cat conftest.err >&5
+ (eval echo "\"\$as_me:$LINENO: output\"" >&5)
+ cat conftest.out >&5
+ if $GREP 'External.*some_variable' conftest.out > /dev/null; then
+ lt_cv_nm_interface="MS dumpbin"
+ fi
+ rm -f conftest*
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5
+$as_echo "$lt_cv_nm_interface" >&6; }
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5
+$as_echo_n "checking whether ln -s works... " >&6; }
+LN_S=$as_ln_s
+if test "$LN_S" = "ln -s"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5
+$as_echo "no, using $LN_S" >&6; }
+fi
+
+# find the maximum length of command line arguments
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5
+$as_echo_n "checking the maximum length of command line arguments... " >&6; }
+if ${lt_cv_sys_max_cmd_len+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ i=0
+ teststring="ABCD"
+
+ case $build_os in
+ msdosdjgpp*)
+ # On DJGPP, this test can blow up pretty badly due to problems in libc
+ # (any single argument exceeding 2000 bytes causes a buffer overrun
+ # during glob expansion). Even if it were fixed, the result of this
+ # check would be larger than it should be.
+ lt_cv_sys_max_cmd_len=12288; # 12K is about right
+ ;;
+
+ gnu*)
+ # Under GNU Hurd, this test is not required because there is
+ # no limit to the length of command line arguments.
+ # Libtool will interpret -1 as no limit whatsoever
+ lt_cv_sys_max_cmd_len=-1;
+ ;;
+
+ cygwin* | mingw* | cegcc*)
+ # On Win9x/ME, this test blows up -- it succeeds, but takes
+ # about 5 minutes as the teststring grows exponentially.
+ # Worse, since 9x/ME are not pre-emptively multitasking,
+ # you end up with a "frozen" computer, even though with patience
+ # the test eventually succeeds (with a max line length of 256k).
+ # Instead, let's just punt: use the minimum linelength reported by
+ # all of the supported platforms: 8192 (on NT/2K/XP).
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
+
+ mint*)
+ # On MiNT this can take a long time and run out of memory.
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
+
+ amigaos*)
+ # On AmigaOS with pdksh, this test takes hours, literally.
+ # So we just punt and use a minimum line length of 8192.
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
+
+ netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+ # This has been around since 386BSD, at least. Likely further.
+ if test -x /sbin/sysctl; then
+ lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
+ elif test -x /usr/sbin/sysctl; then
+ lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
+ else
+ lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs
+ fi
+ # And add a safety zone
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+ ;;
+
+ interix*)
+ # We know the value 262144 and hardcode it with a safety zone (like BSD)
+ lt_cv_sys_max_cmd_len=196608
+ ;;
+
+ os2*)
+ # The test takes a long time on OS/2.
+ lt_cv_sys_max_cmd_len=8192
+ ;;
+
+ osf*)
+ # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
+ # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
+ # nice to cause kernel panics so lets avoid the loop below.
+ # First set a reasonable default.
+ lt_cv_sys_max_cmd_len=16384
+ #
+ if test -x /sbin/sysconfig; then
+ case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
+ *1*) lt_cv_sys_max_cmd_len=-1 ;;
+ esac
+ fi
+ ;;
+ sco3.2v5*)
+ lt_cv_sys_max_cmd_len=102400
+ ;;
+ sysv5* | sco5v6* | sysv4.2uw2*)
+ kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
+ if test -n "$kargmax"; then
+ lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'`
+ else
+ lt_cv_sys_max_cmd_len=32768
+ fi
+ ;;
+ *)
+ lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
+ if test -n "$lt_cv_sys_max_cmd_len"; then
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+ else
+ # Make teststring a little bigger before we do anything with it.
+ # a 1K string should be a reasonable start.
+ for i in 1 2 3 4 5 6 7 8 ; do
+ teststring=$teststring$teststring
+ done
+ SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+ # If test is not a shell built-in, we'll probably end up computing a
+ # maximum length that is only half of the actual maximum length, but
+ # we can't tell.
+ while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \
+ = "X$teststring$teststring"; } >/dev/null 2>&1 &&
+ test $i != 17 # 1/2 MB should be enough
+ do
+ i=`expr $i + 1`
+ teststring=$teststring$teststring
+ done
+ # Only check the string length outside the loop.
+ lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
+ teststring=
+ # Add a significant safety factor because C++ compilers can tack on
+ # massive amounts of additional arguments before passing them to the
+ # linker. It appears as though 1/2 is a usable value.
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+ fi
+ ;;
+ esac
+
+fi
+
+if test -n $lt_cv_sys_max_cmd_len ; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5
+$as_echo "$lt_cv_sys_max_cmd_len" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5
+$as_echo "none" >&6; }
+fi
+max_cmd_len=$lt_cv_sys_max_cmd_len
+
+
+
+
+
+
+: ${CP="cp -f"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands some XSI constructs" >&5
+$as_echo_n "checking whether the shell understands some XSI constructs... " >&6; }
+# Try some XSI features
+xsi_shell=no
+( _lt_dummy="a/b/c"
+ test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \
+ = c,a/b,b/c, \
+ && eval 'test $(( 1 + 1 )) -eq 2 \
+ && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
+ && xsi_shell=yes
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xsi_shell" >&5
+$as_echo "$xsi_shell" >&6; }
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands \"+=\"" >&5
+$as_echo_n "checking whether the shell understands \"+=\"... " >&6; }
+lt_shell_append=no
+( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \
+ >/dev/null 2>&1 \
+ && lt_shell_append=yes
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_shell_append" >&5
+$as_echo "$lt_shell_append" >&6; }
+
+
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+ lt_unset=unset
+else
+ lt_unset=false
+fi
+
+
+
+
+
+# test EBCDIC or ASCII
+case `echo X|tr X '\101'` in
+ A) # ASCII based system
+ # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
+ lt_SP2NL='tr \040 \012'
+ lt_NL2SP='tr \015\012 \040\040'
+ ;;
+ *) # EBCDIC based system
+ lt_SP2NL='tr \100 \n'
+ lt_NL2SP='tr \r\n \100\100'
+ ;;
+esac
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to $host format" >&5
+$as_echo_n "checking how to convert $build file names to $host format... " >&6; }
+if ${lt_cv_to_host_file_cmd+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $host in
+ *-*-mingw* )
+ case $build in
+ *-*-mingw* ) # actually msys
+ lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32
+ ;;
+ *-*-cygwin* )
+ lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32
+ ;;
+ * ) # otherwise, assume *nix
+ lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32
+ ;;
+ esac
+ ;;
+ *-*-cygwin* )
+ case $build in
+ *-*-mingw* ) # actually msys
+ lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin
+ ;;
+ *-*-cygwin* )
+ lt_cv_to_host_file_cmd=func_convert_file_noop
+ ;;
+ * ) # otherwise, assume *nix
+ lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin
+ ;;
+ esac
+ ;;
+ * ) # unhandled hosts (and "normal" native builds)
+ lt_cv_to_host_file_cmd=func_convert_file_noop
+ ;;
+esac
+
+fi
+
+to_host_file_cmd=$lt_cv_to_host_file_cmd
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_host_file_cmd" >&5
+$as_echo "$lt_cv_to_host_file_cmd" >&6; }
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to toolchain format" >&5
+$as_echo_n "checking how to convert $build file names to toolchain format... " >&6; }
+if ${lt_cv_to_tool_file_cmd+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ #assume ordinary cross tools, or native build.
+lt_cv_to_tool_file_cmd=func_convert_file_noop
+case $host in
+ *-*-mingw* )
+ case $build in
+ *-*-mingw* ) # actually msys
+ lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32
+ ;;
+ esac
+ ;;
+esac
+
+fi
+
+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_tool_file_cmd" >&5
+$as_echo "$lt_cv_to_tool_file_cmd" >&6; }
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5
+$as_echo_n "checking for $LD option to reload object files... " >&6; }
+if ${lt_cv_ld_reload_flag+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_ld_reload_flag='-r'
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5
+$as_echo "$lt_cv_ld_reload_flag" >&6; }
+reload_flag=$lt_cv_ld_reload_flag
+case $reload_flag in
+"" | " "*) ;;
+*) reload_flag=" $reload_flag" ;;
+esac
+reload_cmds='$LD$reload_flag -o $output$reload_objs'
+case $host_os in
+ cygwin* | mingw* | pw32* | cegcc*)
+ if test "$GCC" != yes; then
+ reload_cmds=false
+ fi
+ ;;
+ darwin*)
+ if test "$GCC" = yes; then
+ reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+ else
+ reload_cmds='$LD$reload_flag -o $output$reload_objs'
+ fi
+ ;;
+esac
+
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
+set dummy ${ac_tool_prefix}objdump; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_OBJDUMP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$OBJDUMP"; then
+ ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+OBJDUMP=$ac_cv_prog_OBJDUMP
+if test -n "$OBJDUMP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5
+$as_echo "$OBJDUMP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OBJDUMP"; then
+ ac_ct_OBJDUMP=$OBJDUMP
+ # Extract the first word of "objdump", so it can be a program name with args.
+set dummy objdump; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_OBJDUMP"; then
+ ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_OBJDUMP="objdump"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP
+if test -n "$ac_ct_OBJDUMP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5
+$as_echo "$ac_ct_OBJDUMP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_OBJDUMP" = x; then
+ OBJDUMP="false"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ OBJDUMP=$ac_ct_OBJDUMP
+ fi
+else
+ OBJDUMP="$ac_cv_prog_OBJDUMP"
+fi
+
+test -z "$OBJDUMP" && OBJDUMP=objdump
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5
+$as_echo_n "checking how to recognize dependent libraries... " >&6; }
+if ${lt_cv_deplibs_check_method+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_file_magic_cmd='$MAGIC_CMD'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# `unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [[regex]]' -- check by looking for files in library path
+# which responds to the $file_magic_cmd with a given extended regex.
+# If you have `file' or equivalent on your system and you're not sure
+# whether `pass_all' will *always* work, you probably want this one.
+
+case $host_os in
+aix[4-9]*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+beos*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+bsdi[45]*)
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
+ lt_cv_file_magic_cmd='/usr/bin/file -L'
+ lt_cv_file_magic_test_file=/shlib/libc.so
+ ;;
+
+cygwin*)
+ # func_win32_libid is a shell function defined in ltmain.sh
+ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+ lt_cv_file_magic_cmd='func_win32_libid'
+ ;;
+
+mingw* | pw32*)
+ # Base MSYS/MinGW do not provide the 'file' command needed by
+ # func_win32_libid shell function, so use a weaker test based on 'objdump',
+ # unless we find 'file', for example because we are cross-compiling.
+ # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin.
+ if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then
+ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+ lt_cv_file_magic_cmd='func_win32_libid'
+ else
+ # Keep this pattern in sync with the one in func_win32_libid.
+ lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)'
+ lt_cv_file_magic_cmd='$OBJDUMP -f'
+ fi
+ ;;
+
+cegcc*)
+ # use the weaker test based on 'objdump'. See mingw*.
+ lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
+ lt_cv_file_magic_cmd='$OBJDUMP -f'
+ ;;
+
+darwin* | rhapsody*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+freebsd* | dragonfly*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+ case $host_cpu in
+ i*86 )
+ # Not sure whether the presence of OpenBSD here was a mistake.
+ # Let's accept both of them until this is cleared up.
+ lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+ ;;
+ esac
+ else
+ lt_cv_deplibs_check_method=pass_all
+ fi
+ ;;
+
+gnu*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+haiku*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+hpux10.20* | hpux11*)
+ lt_cv_file_magic_cmd=/usr/bin/file
+ case $host_cpu in
+ ia64*)
+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
+ lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
+ ;;
+ hppa*64*)
+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]'
+ lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
+ ;;
+ *)
+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9]\.[0-9]) shared library'
+ lt_cv_file_magic_test_file=/usr/lib/libc.sl
+ ;;
+ esac
+ ;;
+
+interix[3-9]*)
+ # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$'
+ ;;
+
+irix5* | irix6* | nonstopux*)
+ case $LD in
+ *-32|*"-32 ") libmagic=32-bit;;
+ *-n32|*"-n32 ") libmagic=N32;;
+ *-64|*"-64 ") libmagic=64-bit;;
+ *) libmagic=never-match;;
+ esac
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+netbsd*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
+ else
+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$'
+ fi
+ ;;
+
+newos6*)
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=/usr/lib/libnls.so
+ ;;
+
+*nto* | *qnx*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+openbsd*)
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$'
+ else
+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
+ fi
+ ;;
+
+osf3* | osf4* | osf5*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+rdos*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+solaris*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+sysv4 | sysv4.3*)
+ case $host_vendor in
+ motorola)
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+ ;;
+ ncr)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ sequent)
+ lt_cv_file_magic_cmd='/bin/file'
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
+ ;;
+ sni)
+ lt_cv_file_magic_cmd='/bin/file'
+ lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib"
+ lt_cv_file_magic_test_file=/lib/libc.so
+ ;;
+ siemens)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ pc)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ esac
+ ;;
+
+tpf*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+esac
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5
+$as_echo "$lt_cv_deplibs_check_method" >&6; }
+
+file_magic_glob=
+want_nocaseglob=no
+if test "$build" = "$host"; then
+ case $host_os in
+ mingw* | pw32*)
+ if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then
+ want_nocaseglob=yes
+ else
+ file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[\1]\/[\1]\/g;/g"`
+ fi
+ ;;
+ esac
+fi
+
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
+test -z "$deplibs_check_method" && deplibs_check_method=unknown
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dlltool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DLLTOOL+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$DLLTOOL"; then
+ ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+DLLTOOL=$ac_cv_prog_DLLTOOL
+if test -n "$DLLTOOL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5
+$as_echo "$DLLTOOL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_DLLTOOL"; then
+ ac_ct_DLLTOOL=$DLLTOOL
+ # Extract the first word of "dlltool", so it can be a program name with args.
+set dummy dlltool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_DLLTOOL"; then
+ ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_DLLTOOL="dlltool"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL
+if test -n "$ac_ct_DLLTOOL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5
+$as_echo "$ac_ct_DLLTOOL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_DLLTOOL" = x; then
+ DLLTOOL="false"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ DLLTOOL=$ac_ct_DLLTOOL
+ fi
+else
+ DLLTOOL="$ac_cv_prog_DLLTOOL"
+fi
+
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to associate runtime and link libraries" >&5
+$as_echo_n "checking how to associate runtime and link libraries... " >&6; }
+if ${lt_cv_sharedlib_from_linklib_cmd+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_sharedlib_from_linklib_cmd='unknown'
+
+case $host_os in
+cygwin* | mingw* | pw32* | cegcc*)
+ # two different shell functions defined in ltmain.sh
+ # decide which to use based on capabilities of $DLLTOOL
+ case `$DLLTOOL --help 2>&1` in
+ *--identify-strict*)
+ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
+ ;;
+ *)
+ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback
+ ;;
+ esac
+ ;;
+*)
+ # fallback: assume linklib IS sharedlib
+ lt_cv_sharedlib_from_linklib_cmd="$ECHO"
+ ;;
+esac
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5
+$as_echo "$lt_cv_sharedlib_from_linklib_cmd" >&6; }
+sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd
+test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+ for ac_prog in ar
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AR+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$AR"; then
+ ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_AR="$ac_tool_prefix$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+AR=$ac_cv_prog_AR
+if test -n "$AR"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
+$as_echo "$AR" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$AR" && break
+ done
+fi
+if test -z "$AR"; then
+ ac_ct_AR=$AR
+ for ac_prog in ar
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_AR+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_AR"; then
+ ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_AR="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_AR=$ac_cv_prog_ac_ct_AR
+if test -n "$ac_ct_AR"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5
+$as_echo "$ac_ct_AR" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$ac_ct_AR" && break
+done
+
+ if test "x$ac_ct_AR" = x; then
+ AR="false"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ AR=$ac_ct_AR
+ fi
+fi
+
+: ${AR=ar}
+: ${AR_FLAGS=cru}
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5
+$as_echo_n "checking for archiver @FILE support... " >&6; }
+if ${lt_cv_ar_at_file+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_ar_at_file=no
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ echo conftest.$ac_objext > conftest.lst
+ lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
+ (eval $lt_ar_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+ if test "$ac_status" -eq 0; then
+ # Ensure the archiver fails upon bogus file names.
+ rm -f conftest.$ac_objext libconftest.a
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
+ (eval $lt_ar_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+ if test "$ac_status" -ne 0; then
+ lt_cv_ar_at_file=@
+ fi
+ fi
+ rm -f conftest.* libconftest.a
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5
+$as_echo "$lt_cv_ar_at_file" >&6; }
+
+if test "x$lt_cv_ar_at_file" = xno; then
+ archiver_list_spec=
+else
+ archiver_list_spec=$lt_cv_ar_at_file
+fi
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_STRIP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$STRIP"; then
+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+ ac_ct_STRIP=$STRIP
+ # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_STRIP"; then
+ ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_STRIP="strip"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_STRIP" = x; then
+ STRIP=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ STRIP=$ac_ct_STRIP
+ fi
+else
+ STRIP="$ac_cv_prog_STRIP"
+fi
+
+test -z "$STRIP" && STRIP=:
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_RANLIB+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+RANLIB=$ac_cv_prog_RANLIB
+if test -n "$RANLIB"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5
+$as_echo "$RANLIB" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_RANLIB"; then
+ ac_ct_RANLIB=$RANLIB
+ # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_RANLIB+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_RANLIB"; then
+ ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_RANLIB="ranlib"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
+if test -n "$ac_ct_RANLIB"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5
+$as_echo "$ac_ct_RANLIB" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_RANLIB" = x; then
+ RANLIB=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ RANLIB=$ac_ct_RANLIB
+ fi
+else
+ RANLIB="$ac_cv_prog_RANLIB"
+fi
+
+test -z "$RANLIB" && RANLIB=:
+
+
+
+
+
+
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
+
+if test -n "$RANLIB"; then
+ case $host_os in
+ openbsd*)
+ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib"
+ ;;
+ *)
+ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib"
+ ;;
+ esac
+ old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib"
+fi
+
+case $host_os in
+ darwin*)
+ lock_old_archive_extraction=yes ;;
+ *)
+ lock_old_archive_extraction=no ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+for ac_prog in gawk mawk nawk awk
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AWK+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$AWK"; then
+ ac_cv_prog_AWK="$AWK" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_AWK="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+AWK=$ac_cv_prog_AWK
+if test -n "$AWK"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5
+$as_echo "$AWK" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$AWK" && break
+done
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5
+$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; }
+if ${lt_cv_sys_global_symbol_pipe+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+
+# These are sane defaults that work on at least a few old systems.
+# [They come from Ultrix. What could be older than Ultrix?!! ;)]
+
+# Character class describing NM global symbol codes.
+symcode='[BCDEGRST]'
+
+# Regexp to match symbols that can be accessed directly from C.
+sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
+
+# Define system-specific variables.
+case $host_os in
+aix*)
+ symcode='[BCDT]'
+ ;;
+cygwin* | mingw* | pw32* | cegcc*)
+ symcode='[ABCDGISTW]'
+ ;;
+hpux*)
+ if test "$host_cpu" = ia64; then
+ symcode='[ABCDEGRST]'
+ fi
+ ;;
+irix* | nonstopux*)
+ symcode='[BCDEGRST]'
+ ;;
+osf*)
+ symcode='[BCDEGQRST]'
+ ;;
+solaris*)
+ symcode='[BDRT]'
+ ;;
+sco3.2v5*)
+ symcode='[DT]'
+ ;;
+sysv4.2uw2*)
+ symcode='[DT]'
+ ;;
+sysv5* | sco5v6* | unixware* | OpenUNIX*)
+ symcode='[ABDT]'
+ ;;
+sysv4)
+ symcode='[DFNSTU]'
+ ;;
+esac
+
+# If we're using GNU nm, then use its standard symbol codes.
+case `$NM -V 2>&1` in
+*GNU* | *'with BFD'*)
+ symcode='[ABCDGIRSTW]' ;;
+esac
+
+# Transform an extracted symbol line into a proper C declaration.
+# Some systems (esp. on ia64) link data and code symbols differently,
+# so use this general approach.
+lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+
+# Transform an extracted symbol line into symbol name and symbol address
+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'"
+
+# Handle CRLF in mingw tool chain
+opt_cr=
+case $build_os in
+mingw*)
+ opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+ ;;
+esac
+
+# Try without a prefix underscore, then with it.
+for ac_symprfx in "" "_"; do
+
+ # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
+ symxfrm="\\1 $ac_symprfx\\2 \\2"
+
+ # Write the raw and C identifiers.
+ if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+ # Fake it for dumpbin and say T for any non-static function
+ # and D for any global variable.
+ # Also find C++ and __fastcall symbols from MSVC++,
+ # which start with @ or ?.
+ lt_cv_sys_global_symbol_pipe="$AWK '"\
+" {last_section=section; section=\$ 3};"\
+" /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\
+" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
+" \$ 0!~/External *\|/{next};"\
+" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
+" {if(hide[section]) next};"\
+" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
+" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
+" s[1]~/^[@?]/{print s[1], s[1]; next};"\
+" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
+" ' prfx=^$ac_symprfx"
+ else
+ lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+ fi
+ lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'"
+
+ # Check to see that the pipe works correctly.
+ pipe_works=no
+
+ rm -f conftest*
+ cat > conftest.$ac_ext <<_LT_EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(void);
+void nm_test_func(void){}
+#ifdef __cplusplus
+}
+#endif
+int main(){nm_test_var='a';nm_test_func();return(0);}
+_LT_EOF
+
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ # Now try to grab the symbols.
+ nlist=conftest.nm
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist\""; } >&5
+ (eval $NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && test -s "$nlist"; then
+ # Try sorting and uniquifying the output.
+ if sort "$nlist" | uniq > "$nlist"T; then
+ mv -f "$nlist"T "$nlist"
+ else
+ rm -f "$nlist"T
+ fi
+
+ # Make sure that we snagged all the symbols we need.
+ if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
+ if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
+ cat <<_LT_EOF > conftest.$ac_ext
+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */
+#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
+/* DATA imports from DLLs on WIN32 con't be const, because runtime
+ relocations are performed -- see ld's documentation on pseudo-relocs. */
+# define LT_DLSYM_CONST
+#elif defined(__osf__)
+/* This system does not cope well with relocations in const data. */
+# define LT_DLSYM_CONST
+#else
+# define LT_DLSYM_CONST const
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+_LT_EOF
+ # Now generate the symbol file.
+ eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
+
+ cat <<_LT_EOF >> conftest.$ac_ext
+
+/* The mapping between symbol names and symbols. */
+LT_DLSYM_CONST struct {
+ const char *name;
+ void *address;
+}
+lt__PROGRAM__LTX_preloaded_symbols[] =
+{
+ { "@PROGRAM@", (void *) 0 },
+_LT_EOF
+ $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
+ cat <<\_LT_EOF >> conftest.$ac_ext
+ {0, (void *) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+ return lt__PROGRAM__LTX_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+_LT_EOF
+ # Now try linking the two files.
+ mv conftest.$ac_objext conftstm.$ac_objext
+ lt_globsym_save_LIBS=$LIBS
+ lt_globsym_save_CFLAGS=$CFLAGS
+ LIBS="conftstm.$ac_objext"
+ CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && test -s conftest${ac_exeext}; then
+ pipe_works=yes
+ fi
+ LIBS=$lt_globsym_save_LIBS
+ CFLAGS=$lt_globsym_save_CFLAGS
+ else
+ echo "cannot find nm_test_func in $nlist" >&5
+ fi
+ else
+ echo "cannot find nm_test_var in $nlist" >&5
+ fi
+ else
+ echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
+ fi
+ else
+ echo "$progname: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ fi
+ rm -rf conftest* conftst*
+
+ # Do not use the global_symbol_pipe unless it works.
+ if test "$pipe_works" = yes; then
+ break
+ else
+ lt_cv_sys_global_symbol_pipe=
+ fi
+done
+
+fi
+
+if test -z "$lt_cv_sys_global_symbol_pipe"; then
+ lt_cv_sys_global_symbol_to_cdecl=
+fi
+if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5
+$as_echo "failed" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
+$as_echo "ok" >&6; }
+fi
+
+# Response file support.
+if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+ nm_file_list_spec='@'
+elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then
+ nm_file_list_spec='@'
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5
+$as_echo_n "checking for sysroot... " >&6; }
+
+# Check whether --with-sysroot was given.
+if test "${with_sysroot+set}" = set; then :
+ withval=$with_sysroot;
+else
+ with_sysroot=no
+fi
+
+
+lt_sysroot=
+case ${with_sysroot} in #(
+ yes)
+ if test "$GCC" = yes; then
+ lt_sysroot=`$CC --print-sysroot 2>/dev/null`
+ fi
+ ;; #(
+ /*)
+ lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"`
+ ;; #(
+ no|'')
+ ;; #(
+ *)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${with_sysroot}" >&5
+$as_echo "${with_sysroot}" >&6; }
+ as_fn_error $? "The sysroot must be an absolute path." "$LINENO" 5
+ ;;
+esac
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5
+$as_echo "${lt_sysroot:-no}" >&6; }
+
+
+
+
+
+# Check whether --enable-libtool-lock was given.
+if test "${enable_libtool_lock+set}" = set; then :
+ enableval=$enable_libtool_lock;
+fi
+
+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case $host in
+ia64-*-hpux*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ case `/usr/bin/file conftest.$ac_objext` in
+ *ELF-32*)
+ HPUX_IA64_MODE="32"
+ ;;
+ *ELF-64*)
+ HPUX_IA64_MODE="64"
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+*-*-irix6*)
+ # Find out which ABI we are using.
+ echo '#line '$LINENO' "configure"' > conftest.$ac_ext
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ if test "$lt_cv_prog_gnu_ld" = yes; then
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ LD="${LD-ld} -melf32bsmip"
+ ;;
+ *N32*)
+ LD="${LD-ld} -melf32bmipn32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -melf64bmip"
+ ;;
+ esac
+ else
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ LD="${LD-ld} -32"
+ ;;
+ *N32*)
+ LD="${LD-ld} -n32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -64"
+ ;;
+ esac
+ fi
+ fi
+ rm -rf conftest*
+ ;;
+
+x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
+s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ case `/usr/bin/file conftest.o` in
+ *32-bit*)
+ case $host in
+ x86_64-*kfreebsd*-gnu)
+ LD="${LD-ld} -m elf_i386_fbsd"
+ ;;
+ x86_64-*linux*)
+ LD="${LD-ld} -m elf_i386"
+ ;;
+ ppc64-*linux*|powerpc64-*linux*)
+ LD="${LD-ld} -m elf32ppclinux"
+ ;;
+ s390x-*linux*)
+ LD="${LD-ld} -m elf_s390"
+ ;;
+ sparc64-*linux*)
+ LD="${LD-ld} -m elf32_sparc"
+ ;;
+ esac
+ ;;
+ *64-bit*)
+ case $host in
+ x86_64-*kfreebsd*-gnu)
+ LD="${LD-ld} -m elf_x86_64_fbsd"
+ ;;
+ x86_64-*linux*)
+ LD="${LD-ld} -m elf_x86_64"
+ ;;
+ ppc*-*linux*|powerpc*-*linux*)
+ LD="${LD-ld} -m elf64ppc"
+ ;;
+ s390*-*linux*|s390*-*tpf*)
+ LD="${LD-ld} -m elf64_s390"
+ ;;
+ sparc*-*linux*)
+ LD="${LD-ld} -m elf64_sparc"
+ ;;
+ esac
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+
+*-*-sco3.2v5*)
+ # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+ SAVE_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS -belf"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5
+$as_echo_n "checking whether the C compiler needs -belf... " >&6; }
+if ${lt_cv_cc_needs_belf+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ lt_cv_cc_needs_belf=yes
+else
+ lt_cv_cc_needs_belf=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5
+$as_echo "$lt_cv_cc_needs_belf" >&6; }
+ if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+ # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+ CFLAGS="$SAVE_CFLAGS"
+ fi
+ ;;
+*-*solaris*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ case `/usr/bin/file conftest.o` in
+ *64-bit*)
+ case $lt_cv_prog_gnu_ld in
+ yes*)
+ case $host in
+ i?86-*-solaris*)
+ LD="${LD-ld} -m elf_x86_64"
+ ;;
+ sparc*-*-solaris*)
+ LD="${LD-ld} -m elf64_sparc"
+ ;;
+ esac
+ # GNU ld 2.21 introduced _sol2 emulations. Use them if available.
+ if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then
+ LD="${LD-ld}_sol2"
+ fi
+ ;;
+ *)
+ if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
+ LD="${LD-ld} -64"
+ fi
+ ;;
+ esac
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+esac
+
+need_locks="$enable_libtool_lock"
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args.
+set dummy ${ac_tool_prefix}mt; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_MANIFEST_TOOL+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$MANIFEST_TOOL"; then
+ ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL
+if test -n "$MANIFEST_TOOL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MANIFEST_TOOL" >&5
+$as_echo "$MANIFEST_TOOL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_MANIFEST_TOOL"; then
+ ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL
+ # Extract the first word of "mt", so it can be a program name with args.
+set dummy mt; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_MANIFEST_TOOL+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_MANIFEST_TOOL"; then
+ ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_MANIFEST_TOOL="mt"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL
+if test -n "$ac_ct_MANIFEST_TOOL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MANIFEST_TOOL" >&5
+$as_echo "$ac_ct_MANIFEST_TOOL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_MANIFEST_TOOL" = x; then
+ MANIFEST_TOOL=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL
+ fi
+else
+ MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL"
+fi
+
+test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5
+$as_echo_n "checking if $MANIFEST_TOOL is a manifest tool... " >&6; }
+if ${lt_cv_path_mainfest_tool+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_path_mainfest_tool=no
+ echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5
+ $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out
+ cat conftest.err >&5
+ if $GREP 'Manifest Tool' conftest.out > /dev/null; then
+ lt_cv_path_mainfest_tool=yes
+ fi
+ rm -f conftest*
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5
+$as_echo "$lt_cv_path_mainfest_tool" >&6; }
+if test "x$lt_cv_path_mainfest_tool" != xyes; then
+ MANIFEST_TOOL=:
+fi
+
+
+
+
+
+
+ case $host_os in
+ rhapsody* | darwin*)
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dsymutil; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DSYMUTIL+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$DSYMUTIL"; then
+ ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+DSYMUTIL=$ac_cv_prog_DSYMUTIL
+if test -n "$DSYMUTIL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5
+$as_echo "$DSYMUTIL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_DSYMUTIL"; then
+ ac_ct_DSYMUTIL=$DSYMUTIL
+ # Extract the first word of "dsymutil", so it can be a program name with args.
+set dummy dsymutil; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DSYMUTIL+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_DSYMUTIL"; then
+ ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_DSYMUTIL="dsymutil"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL
+if test -n "$ac_ct_DSYMUTIL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5
+$as_echo "$ac_ct_DSYMUTIL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_DSYMUTIL" = x; then
+ DSYMUTIL=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ DSYMUTIL=$ac_ct_DSYMUTIL
+ fi
+else
+ DSYMUTIL="$ac_cv_prog_DSYMUTIL"
+fi
+
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args.
+set dummy ${ac_tool_prefix}nmedit; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_NMEDIT+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$NMEDIT"; then
+ ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+NMEDIT=$ac_cv_prog_NMEDIT
+if test -n "$NMEDIT"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5
+$as_echo "$NMEDIT" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_NMEDIT"; then
+ ac_ct_NMEDIT=$NMEDIT
+ # Extract the first word of "nmedit", so it can be a program name with args.
+set dummy nmedit; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_NMEDIT+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_NMEDIT"; then
+ ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_NMEDIT="nmedit"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT
+if test -n "$ac_ct_NMEDIT"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5
+$as_echo "$ac_ct_NMEDIT" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_NMEDIT" = x; then
+ NMEDIT=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ NMEDIT=$ac_ct_NMEDIT
+ fi
+else
+ NMEDIT="$ac_cv_prog_NMEDIT"
+fi
+
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args.
+set dummy ${ac_tool_prefix}lipo; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_LIPO+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$LIPO"; then
+ ac_cv_prog_LIPO="$LIPO" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_LIPO="${ac_tool_prefix}lipo"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+LIPO=$ac_cv_prog_LIPO
+if test -n "$LIPO"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5
+$as_echo "$LIPO" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_LIPO"; then
+ ac_ct_LIPO=$LIPO
+ # Extract the first word of "lipo", so it can be a program name with args.
+set dummy lipo; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_LIPO+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_LIPO"; then
+ ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_LIPO="lipo"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO
+if test -n "$ac_ct_LIPO"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5
+$as_echo "$ac_ct_LIPO" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_LIPO" = x; then
+ LIPO=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ LIPO=$ac_ct_LIPO
+ fi
+else
+ LIPO="$ac_cv_prog_LIPO"
+fi
+
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args.
+set dummy ${ac_tool_prefix}otool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_OTOOL+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$OTOOL"; then
+ ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_OTOOL="${ac_tool_prefix}otool"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+OTOOL=$ac_cv_prog_OTOOL
+if test -n "$OTOOL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5
+$as_echo "$OTOOL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OTOOL"; then
+ ac_ct_OTOOL=$OTOOL
+ # Extract the first word of "otool", so it can be a program name with args.
+set dummy otool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_OTOOL+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_OTOOL"; then
+ ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_OTOOL="otool"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL
+if test -n "$ac_ct_OTOOL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5
+$as_echo "$ac_ct_OTOOL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_OTOOL" = x; then
+ OTOOL=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ OTOOL=$ac_ct_OTOOL
+ fi
+else
+ OTOOL="$ac_cv_prog_OTOOL"
+fi
+
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args.
+set dummy ${ac_tool_prefix}otool64; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_OTOOL64+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$OTOOL64"; then
+ ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+OTOOL64=$ac_cv_prog_OTOOL64
+if test -n "$OTOOL64"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5
+$as_echo "$OTOOL64" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OTOOL64"; then
+ ac_ct_OTOOL64=$OTOOL64
+ # Extract the first word of "otool64", so it can be a program name with args.
+set dummy otool64; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_OTOOL64+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_OTOOL64"; then
+ ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_OTOOL64="otool64"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64
+if test -n "$ac_ct_OTOOL64"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5
+$as_echo "$ac_ct_OTOOL64" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_OTOOL64" = x; then
+ OTOOL64=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ OTOOL64=$ac_ct_OTOOL64
+ fi
+else
+ OTOOL64="$ac_cv_prog_OTOOL64"
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5
+$as_echo_n "checking for -single_module linker flag... " >&6; }
+if ${lt_cv_apple_cc_single_mod+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_apple_cc_single_mod=no
+ if test -z "${LT_MULTI_MODULE}"; then
+ # By default we will add the -single_module flag. You can override
+ # by either setting the environment variable LT_MULTI_MODULE
+ # non-empty at configure time, or by adding -multi_module to the
+ # link flags.
+ rm -rf libconftest.dylib*
+ echo "int foo(void){return 1;}" > conftest.c
+ echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+-dynamiclib -Wl,-single_module conftest.c" >&5
+ $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+ -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
+ _lt_result=$?
+ # If there is a non-empty error log, and "single_module"
+ # appears in it, assume the flag caused a linker warning
+ if test -s conftest.err && $GREP single_module conftest.err; then
+ cat conftest.err >&5
+ # Otherwise, if the output was created with a 0 exit code from
+ # the compiler, it worked.
+ elif test -f libconftest.dylib && test $_lt_result -eq 0; then
+ lt_cv_apple_cc_single_mod=yes
+ else
+ cat conftest.err >&5
+ fi
+ rm -rf libconftest.dylib*
+ rm -f conftest.*
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5
+$as_echo "$lt_cv_apple_cc_single_mod" >&6; }
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5
+$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; }
+if ${lt_cv_ld_exported_symbols_list+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_ld_exported_symbols_list=no
+ save_LDFLAGS=$LDFLAGS
+ echo "_main" > conftest.sym
+ LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ lt_cv_ld_exported_symbols_list=yes
+else
+ lt_cv_ld_exported_symbols_list=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5
+$as_echo "$lt_cv_ld_exported_symbols_list" >&6; }
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -force_load linker flag" >&5
+$as_echo_n "checking for -force_load linker flag... " >&6; }
+if ${lt_cv_ld_force_load+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_ld_force_load=no
+ cat > conftest.c << _LT_EOF
+int forced_loaded() { return 2;}
+_LT_EOF
+ echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&5
+ $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5
+ echo "$AR cru libconftest.a conftest.o" >&5
+ $AR cru libconftest.a conftest.o 2>&5
+ echo "$RANLIB libconftest.a" >&5
+ $RANLIB libconftest.a 2>&5
+ cat > conftest.c << _LT_EOF
+int main() { return 0;}
+_LT_EOF
+ echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&5
+ $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err
+ _lt_result=$?
+ if test -s conftest.err && $GREP force_load conftest.err; then
+ cat conftest.err >&5
+ elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then
+ lt_cv_ld_force_load=yes
+ else
+ cat conftest.err >&5
+ fi
+ rm -f conftest.err libconftest.a conftest conftest.c
+ rm -rf conftest.dSYM
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_force_load" >&5
+$as_echo "$lt_cv_ld_force_load" >&6; }
+ case $host_os in
+ rhapsody* | darwin1.[012])
+ _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
+ darwin1.*)
+ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+ darwin*) # darwin 5.x on
+ # if running on 10.5 or later, the deployment target defaults
+ # to the OS version, if on x86, and 10.4, the deployment
+ # target defaults to 10.4. Don't you love it?
+ case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
+ 10.0,*86*-darwin8*|10.0,*-darwin[91]*)
+ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+ 10.[012]*)
+ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+ 10.*)
+ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+ esac
+ ;;
+ esac
+ if test "$lt_cv_apple_cc_single_mod" = "yes"; then
+ _lt_dar_single_mod='$single_module'
+ fi
+ if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
+ _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
+ else
+ _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
+ fi
+ if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then
+ _lt_dsymutil='~$DSYMUTIL $lib || :'
+ else
+ _lt_dsymutil=
+ fi
+ ;;
+ esac
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5
+$as_echo_n "checking how to run the C preprocessor... " >&6; }
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+ CPP=
+fi
+if test -z "$CPP"; then
+ if ${ac_cv_prog_CPP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ # Double quotes because CPP needs to be expanded
+ for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
+ do
+ ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+ # Use a header file that comes with gcc, so configuring glibc
+ # with a fresh cross-compiler works.
+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ # <limits.h> exists even on freestanding compilers.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp. "Syntax error" is here to catch this case.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+ Syntax error
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+
+else
+ # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+ # OK, works on sane cases. Now check whether nonexistent headers
+ # can be detected and how.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+ # Broken: success on invalid input.
+continue
+else
+ # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+ break
+fi
+
+ done
+ ac_cv_prog_CPP=$CPP
+
+fi
+ CPP=$ac_cv_prog_CPP
+else
+ ac_cv_prog_CPP=$CPP
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5
+$as_echo "$CPP" >&6; }
+ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+ # Use a header file that comes with gcc, so configuring glibc
+ # with a fresh cross-compiler works.
+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ # <limits.h> exists even on freestanding compilers.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp. "Syntax error" is here to catch this case.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+ Syntax error
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+
+else
+ # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+ # OK, works on sane cases. Now check whether nonexistent headers
+ # can be detected and how.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+ # Broken: success on invalid input.
+continue
+else
+ # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+
+else
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
+$as_echo_n "checking for ANSI C header files... " >&6; }
+if ${ac_cv_header_stdc+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_header_stdc=yes
+else
+ ac_cv_header_stdc=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+if test $ac_cv_header_stdc = yes; then
+ # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <string.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "memchr" >/dev/null 2>&1; then :
+
+else
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <stdlib.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "free" >/dev/null 2>&1; then :
+
+else
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+ if test "$cross_compiling" = yes; then :
+ :
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <ctype.h>
+#include <stdlib.h>
+#if ((' ' & 0x0FF) == 0x020)
+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#else
+# define ISLOWER(c) \
+ (('a' <= (c) && (c) <= 'i') \
+ || ('j' <= (c) && (c) <= 'r') \
+ || ('s' <= (c) && (c) <= 'z'))
+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
+#endif
+
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int
+main ()
+{
+ int i;
+ for (i = 0; i < 256; i++)
+ if (XOR (islower (i), ISLOWER (i))
+ || toupper (i) != TOUPPER (i))
+ return 2;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+
+else
+ ac_cv_header_stdc=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+ conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5
+$as_echo "$ac_cv_header_stdc" >&6; }
+if test $ac_cv_header_stdc = yes; then
+
+$as_echo "#define STDC_HEADERS 1" >>confdefs.h
+
+fi
+
+# On IRIX 5.3, sys/types and inttypes.h are conflicting.
+for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
+ inttypes.h stdint.h unistd.h
+do :
+ as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
+"
+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
+ cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+for ac_header in dlfcn.h
+do :
+ ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default
+"
+if test "x$ac_cv_header_dlfcn_h" = xyes; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_DLFCN_H 1
+_ACEOF
+
+fi
+
+done
+
+
+
+
+
+# Set options
+
+
+
+ enable_dlopen=no
+
+
+ enable_win32_dll=no
+
+
+ # Check whether --enable-shared was given.
+if test "${enable_shared+set}" = set; then :
+ enableval=$enable_shared; p=${PACKAGE-default}
+ case $enableval in
+ yes) enable_shared=yes ;;
+ no) enable_shared=no ;;
+ *)
+ enable_shared=no
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ for pkg in $enableval; do
+ IFS="$lt_save_ifs"
+ if test "X$pkg" = "X$p"; then
+ enable_shared=yes
+ fi
+ done
+ IFS="$lt_save_ifs"
+ ;;
+ esac
+else
+ enable_shared=yes
+fi
+
+
+
+
+
+
+
+
+
+ # Check whether --enable-static was given.
+if test "${enable_static+set}" = set; then :
+ enableval=$enable_static; p=${PACKAGE-default}
+ case $enableval in
+ yes) enable_static=yes ;;
+ no) enable_static=no ;;
+ *)
+ enable_static=no
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ for pkg in $enableval; do
+ IFS="$lt_save_ifs"
+ if test "X$pkg" = "X$p"; then
+ enable_static=yes
+ fi
+ done
+ IFS="$lt_save_ifs"
+ ;;
+ esac
+else
+ enable_static=yes
+fi
+
+
+
+
+
+
+
+
+
+
+# Check whether --with-pic was given.
+if test "${with_pic+set}" = set; then :
+ withval=$with_pic; lt_p=${PACKAGE-default}
+ case $withval in
+ yes|no) pic_mode=$withval ;;
+ *)
+ pic_mode=default
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ for lt_pkg in $withval; do
+ IFS="$lt_save_ifs"
+ if test "X$lt_pkg" = "X$lt_p"; then
+ pic_mode=yes
+ fi
+ done
+ IFS="$lt_save_ifs"
+ ;;
+ esac
+else
+ pic_mode=default
+fi
+
+
+test -z "$pic_mode" && pic_mode=default
+
+
+
+
+
+
+
+ # Check whether --enable-fast-install was given.
+if test "${enable_fast_install+set}" = set; then :
+ enableval=$enable_fast_install; p=${PACKAGE-default}
+ case $enableval in
+ yes) enable_fast_install=yes ;;
+ no) enable_fast_install=no ;;
+ *)
+ enable_fast_install=no
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ for pkg in $enableval; do
+ IFS="$lt_save_ifs"
+ if test "X$pkg" = "X$p"; then
+ enable_fast_install=yes
+ fi
+ done
+ IFS="$lt_save_ifs"
+ ;;
+ esac
+else
+ enable_fast_install=yes
+fi
+
+
+
+
+
+
+
+
+
+
+
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS="$ltmain"
+
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+test -z "$LN_S" && LN_S="ln -s"
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+if test -n "${ZSH_VERSION+set}" ; then
+ setopt NO_GLOB_SUBST
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5
+$as_echo_n "checking for objdir... " >&6; }
+if ${lt_cv_objdir+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ rm -f .libs 2>/dev/null
+mkdir .libs 2>/dev/null
+if test -d .libs; then
+ lt_cv_objdir=.libs
+else
+ # MS-DOS does not allow filenames that begin with a dot.
+ lt_cv_objdir=_libs
+fi
+rmdir .libs 2>/dev/null
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5
+$as_echo "$lt_cv_objdir" >&6; }
+objdir=$lt_cv_objdir
+
+
+
+
+
+cat >>confdefs.h <<_ACEOF
+#define LT_OBJDIR "$lt_cv_objdir/"
+_ACEOF
+
+
+
+
+case $host_os in
+aix3*)
+ # AIX sometimes has problems with the GCC collect2 program. For some
+ # reason, if we set the COLLECT_NAMES environment variable, the problems
+ # vanish in a puff of smoke.
+ if test "X${COLLECT_NAMES+set}" != Xset; then
+ COLLECT_NAMES=
+ export COLLECT_NAMES
+ fi
+ ;;
+esac
+
+# Global variables:
+ofile=libtool
+can_build_shared=yes
+
+# All known linkers require a `.a' archive for static linking (except MSVC,
+# which needs '.lib').
+libext=a
+
+with_gnu_ld="$lt_cv_prog_gnu_ld"
+
+old_CC="$CC"
+old_CFLAGS="$CFLAGS"
+
+# Set sane defaults for various variables
+test -z "$CC" && CC=cc
+test -z "$LTCC" && LTCC=$CC
+test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
+test -z "$LD" && LD=ld
+test -z "$ac_objext" && ac_objext=o
+
+for cc_temp in $compiler""; do
+ case $cc_temp in
+ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+ \-*) ;;
+ *) break;;
+ esac
+done
+cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+
+
+# Only perform the check for file, if the check method requires it
+test -z "$MAGIC_CMD" && MAGIC_CMD=file
+case $deplibs_check_method in
+file_magic*)
+ if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5
+$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; }
+if ${lt_cv_path_MAGIC_CMD+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $MAGIC_CMD in
+[\\/*] | ?:[\\/]*)
+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+ ;;
+*)
+ lt_save_MAGIC_CMD="$MAGIC_CMD"
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
+ for ac_dir in $ac_dummy; do
+ IFS="$lt_save_ifs"
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/${ac_tool_prefix}file; then
+ lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
+ if test -n "$file_magic_test_file"; then
+ case $deplibs_check_method in
+ "file_magic "*)
+ file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+ MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+ $EGREP "$file_magic_regex" > /dev/null; then
+ :
+ else
+ cat <<_LT_EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such. This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem. Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool at gnu.org
+
+_LT_EOF
+ fi ;;
+ esac
+ fi
+ break
+ fi
+ done
+ IFS="$lt_save_ifs"
+ MAGIC_CMD="$lt_save_MAGIC_CMD"
+ ;;
+esac
+fi
+
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
+$as_echo "$MAGIC_CMD" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+
+
+
+if test -z "$lt_cv_path_MAGIC_CMD"; then
+ if test -n "$ac_tool_prefix"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5
+$as_echo_n "checking for file... " >&6; }
+if ${lt_cv_path_MAGIC_CMD+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $MAGIC_CMD in
+[\\/*] | ?:[\\/]*)
+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+ ;;
+*)
+ lt_save_MAGIC_CMD="$MAGIC_CMD"
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
+ for ac_dir in $ac_dummy; do
+ IFS="$lt_save_ifs"
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/file; then
+ lt_cv_path_MAGIC_CMD="$ac_dir/file"
+ if test -n "$file_magic_test_file"; then
+ case $deplibs_check_method in
+ "file_magic "*)
+ file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+ MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+ $EGREP "$file_magic_regex" > /dev/null; then
+ :
+ else
+ cat <<_LT_EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such. This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem. Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool at gnu.org
+
+_LT_EOF
+ fi ;;
+ esac
+ fi
+ break
+ fi
+ done
+ IFS="$lt_save_ifs"
+ MAGIC_CMD="$lt_save_MAGIC_CMD"
+ ;;
+esac
+fi
+
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
+$as_echo "$MAGIC_CMD" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ else
+ MAGIC_CMD=:
+ fi
+fi
+
+ fi
+ ;;
+esac
+
+# Use C for the default configuration in the libtool script
+
+lt_save_CC="$CC"
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+# Source file extension for C test sources.
+ac_ext=c
+
+# Object file extension for compiled C test sources.
+objext=o
+objext=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='int main(){return(0);}'
+
+
+
+
+
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+# Save the default compiler, since it gets overwritten when the other
+# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
+compiler_DEFAULT=$CC
+
+# save warnings/boilerplate of simple test code
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$RM conftest*
+
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$RM -r conftest*
+
+
+if test -n "$compiler"; then
+
+lt_prog_compiler_no_builtin_flag=
+
+if test "$GCC" = yes; then
+ case $cc_basename in
+ nvcc*)
+ lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;;
+ *)
+ lt_prog_compiler_no_builtin_flag=' -fno-builtin' ;;
+ esac
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
+$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; }
+if ${lt_cv_prog_compiler_rtti_exceptions+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler_rtti_exceptions=no
+ ac_outfile=conftest.$ac_objext
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+ lt_compiler_flag="-fno-rtti -fno-exceptions"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ # The option is referenced via a variable to avoid confusing sed.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>conftest.err)
+ ac_status=$?
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s "$ac_outfile"; then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings other than the usual output.
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler_rtti_exceptions=yes
+ fi
+ fi
+ $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
+$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; }
+
+if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
+ lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions"
+else
+ :
+fi
+
+fi
+
+
+
+
+
+
+ lt_prog_compiler_wl=
+lt_prog_compiler_pic=
+lt_prog_compiler_static=
+
+
+ if test "$GCC" = yes; then
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_static='-static'
+
+ case $host_os in
+ aix*)
+ # All AIX code is PIC.
+ if test "$host_cpu" = ia64; then
+ # AIX 5 now supports IA64 processor
+ lt_prog_compiler_static='-Bstatic'
+ fi
+ ;;
+
+ amigaos*)
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ lt_prog_compiler_pic='-fPIC'
+ ;;
+ m68k)
+ # FIXME: we need at least 68020 code to build shared libraries, but
+ # adding the `-m68020' flag to GCC prevents building anything better,
+ # like `-m68040'.
+ lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4'
+ ;;
+ esac
+ ;;
+
+ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+ # PIC is the default for these OSes.
+ ;;
+
+ mingw* | cygwin* | pw32* | os2* | cegcc*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ # Although the cygwin gcc ignores -fPIC, still need this for old-style
+ # (--disable-auto-import) libraries
+ lt_prog_compiler_pic='-DDLL_EXPORT'
+ ;;
+
+ darwin* | rhapsody*)
+ # PIC is the default on this platform
+ # Common symbols not allowed in MH_DYLIB files
+ lt_prog_compiler_pic='-fno-common'
+ ;;
+
+ haiku*)
+ # PIC is the default for Haiku.
+ # The "-static" flag exists, but is broken.
+ lt_prog_compiler_static=
+ ;;
+
+ hpux*)
+ # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+ # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag
+ # sets the default TLS model and affects inlining.
+ case $host_cpu in
+ hppa*64*)
+ # +Z the default
+ ;;
+ *)
+ lt_prog_compiler_pic='-fPIC'
+ ;;
+ esac
+ ;;
+
+ interix[3-9]*)
+ # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+ # Instead, we relocate shared libraries at runtime.
+ ;;
+
+ msdosdjgpp*)
+ # Just because we use GCC doesn't mean we suddenly get shared libraries
+ # on systems that don't support them.
+ lt_prog_compiler_can_build_shared=no
+ enable_shared=no
+ ;;
+
+ *nto* | *qnx*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ lt_prog_compiler_pic='-fPIC -shared'
+ ;;
+
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ lt_prog_compiler_pic=-Kconform_pic
+ fi
+ ;;
+
+ *)
+ lt_prog_compiler_pic='-fPIC'
+ ;;
+ esac
+
+ case $cc_basename in
+ nvcc*) # Cuda Compiler Driver 2.2
+ lt_prog_compiler_wl='-Xlinker '
+ if test -n "$lt_prog_compiler_pic"; then
+ lt_prog_compiler_pic="-Xcompiler $lt_prog_compiler_pic"
+ fi
+ ;;
+ esac
+ else
+ # PORTME Check for flag to pass linker flags through the system compiler.
+ case $host_os in
+ aix*)
+ lt_prog_compiler_wl='-Wl,'
+ if test "$host_cpu" = ia64; then
+ # AIX 5 now supports IA64 processor
+ lt_prog_compiler_static='-Bstatic'
+ else
+ lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp'
+ fi
+ ;;
+
+ mingw* | cygwin* | pw32* | os2* | cegcc*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ lt_prog_compiler_pic='-DDLL_EXPORT'
+ ;;
+
+ hpux9* | hpux10* | hpux11*)
+ lt_prog_compiler_wl='-Wl,'
+ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+ # not for PA HP-UX.
+ case $host_cpu in
+ hppa*64*|ia64*)
+ # +Z the default
+ ;;
+ *)
+ lt_prog_compiler_pic='+Z'
+ ;;
+ esac
+ # Is there a better lt_prog_compiler_static that works with the bundled CC?
+ lt_prog_compiler_static='${wl}-a ${wl}archive'
+ ;;
+
+ irix5* | irix6* | nonstopux*)
+ lt_prog_compiler_wl='-Wl,'
+ # PIC (with -KPIC) is the default.
+ lt_prog_compiler_static='-non_shared'
+ ;;
+
+ linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ case $cc_basename in
+ # old Intel for x86_64 which still supported -KPIC.
+ ecc*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-static'
+ ;;
+ # icc used to be incompatible with GCC.
+ # ICC 10 doesn't accept -KPIC any more.
+ icc* | ifort*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-fPIC'
+ lt_prog_compiler_static='-static'
+ ;;
+ # Lahey Fortran 8.1.
+ lf95*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='--shared'
+ lt_prog_compiler_static='--static'
+ ;;
+ nagfor*)
+ # NAG Fortran compiler
+ lt_prog_compiler_wl='-Wl,-Wl,,'
+ lt_prog_compiler_pic='-PIC'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+ pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
+ # Portland Group compilers (*not* the Pentium gcc compiler,
+ # which looks to be a dead project)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-fpic'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+ ccc*)
+ lt_prog_compiler_wl='-Wl,'
+ # All Alpha code is PIC.
+ lt_prog_compiler_static='-non_shared'
+ ;;
+ xl* | bgxl* | bgf* | mpixl*)
+ # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-qpic'
+ lt_prog_compiler_static='-qstaticlink'
+ ;;
+ *)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [1-7].* | *Sun*Fortran*\ 8.[0-3]*)
+ # Sun Fortran 8.3 passes all unrecognized flags to the linker
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ lt_prog_compiler_wl=''
+ ;;
+ *Sun\ F* | *Sun*Fortran*)
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ lt_prog_compiler_wl='-Qoption ld '
+ ;;
+ *Sun\ C*)
+ # Sun C 5.9
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ lt_prog_compiler_wl='-Wl,'
+ ;;
+ *Intel*\ [CF]*Compiler*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-fPIC'
+ lt_prog_compiler_static='-static'
+ ;;
+ *Portland\ Group*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-fpic'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+
+ newsos6)
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+
+ *nto* | *qnx*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ lt_prog_compiler_pic='-fPIC -shared'
+ ;;
+
+ osf3* | osf4* | osf5*)
+ lt_prog_compiler_wl='-Wl,'
+ # All OSF/1 code is PIC.
+ lt_prog_compiler_static='-non_shared'
+ ;;
+
+ rdos*)
+ lt_prog_compiler_static='-non_shared'
+ ;;
+
+ solaris*)
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ case $cc_basename in
+ f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
+ lt_prog_compiler_wl='-Qoption ld ';;
+ *)
+ lt_prog_compiler_wl='-Wl,';;
+ esac
+ ;;
+
+ sunos4*)
+ lt_prog_compiler_wl='-Qoption ld '
+ lt_prog_compiler_pic='-PIC'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+
+ sysv4 | sysv4.2uw2* | sysv4.3*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+
+ sysv4*MP*)
+ if test -d /usr/nec ;then
+ lt_prog_compiler_pic='-Kconform_pic'
+ lt_prog_compiler_static='-Bstatic'
+ fi
+ ;;
+
+ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+
+ unicos*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_can_build_shared=no
+ ;;
+
+ uts4*)
+ lt_prog_compiler_pic='-pic'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+
+ *)
+ lt_prog_compiler_can_build_shared=no
+ ;;
+ esac
+ fi
+
+case $host_os in
+ # For platforms which do not support PIC, -DPIC is meaningless:
+ *djgpp*)
+ lt_prog_compiler_pic=
+ ;;
+ *)
+ lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
+ ;;
+esac
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
+$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
+if ${lt_cv_prog_compiler_pic+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler_pic=$lt_prog_compiler_pic
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5
+$as_echo "$lt_cv_prog_compiler_pic" >&6; }
+lt_prog_compiler_pic=$lt_cv_prog_compiler_pic
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$lt_prog_compiler_pic"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
+$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; }
+if ${lt_cv_prog_compiler_pic_works+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler_pic_works=no
+ ac_outfile=conftest.$ac_objext
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+ lt_compiler_flag="$lt_prog_compiler_pic -DPIC"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ # The option is referenced via a variable to avoid confusing sed.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>conftest.err)
+ ac_status=$?
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s "$ac_outfile"; then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings other than the usual output.
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler_pic_works=yes
+ fi
+ fi
+ $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5
+$as_echo "$lt_cv_prog_compiler_pic_works" >&6; }
+
+if test x"$lt_cv_prog_compiler_pic_works" = xyes; then
+ case $lt_prog_compiler_pic in
+ "" | " "*) ;;
+ *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;;
+ esac
+else
+ lt_prog_compiler_pic=
+ lt_prog_compiler_can_build_shared=no
+fi
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+#
+# Check to make sure the static flag actually works.
+#
+wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
+if ${lt_cv_prog_compiler_static_works+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler_static_works=no
+ save_LDFLAGS="$LDFLAGS"
+ LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
+ echo "$lt_simple_link_test_code" > conftest.$ac_ext
+ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+ # The linker can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ if test -s conftest.err; then
+ # Append any errors to the config.log.
+ cat conftest.err 1>&5
+ $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if diff conftest.exp conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler_static_works=yes
+ fi
+ else
+ lt_cv_prog_compiler_static_works=yes
+ fi
+ fi
+ $RM -r conftest*
+ LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5
+$as_echo "$lt_cv_prog_compiler_static_works" >&6; }
+
+if test x"$lt_cv_prog_compiler_static_works" = xyes; then
+ :
+else
+ lt_prog_compiler_static=
+fi
+
+
+
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if ${lt_cv_prog_compiler_c_o+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler_c_o=no
+ $RM -r conftest 2>/dev/null
+ mkdir conftest
+ cd conftest
+ mkdir out
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+ lt_compiler_flag="-o out/conftest2.$ac_objext"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>out/conftest.err)
+ ac_status=$?
+ cat out/conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s out/conftest2.$ac_objext
+ then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler_c_o=yes
+ fi
+ fi
+ chmod u+w . 2>&5
+ $RM conftest*
+ # SGI C++ compiler will create directory out/ii_files/ for
+ # template instantiation
+ test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+ $RM out/* && rmdir out
+ cd ..
+ $RM -r conftest
+ $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
+$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
+
+
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if ${lt_cv_prog_compiler_c_o+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler_c_o=no
+ $RM -r conftest 2>/dev/null
+ mkdir conftest
+ cd conftest
+ mkdir out
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+ lt_compiler_flag="-o out/conftest2.$ac_objext"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>out/conftest.err)
+ ac_status=$?
+ cat out/conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s out/conftest2.$ac_objext
+ then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler_c_o=yes
+ fi
+ fi
+ chmod u+w . 2>&5
+ $RM conftest*
+ # SGI C++ compiler will create directory out/ii_files/ for
+ # template instantiation
+ test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+ $RM out/* && rmdir out
+ cd ..
+ $RM -r conftest
+ $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
+$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
+
+
+
+
+hard_links="nottested"
+if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then
+ # do not overwrite the value of need_locks provided by the user
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5
+$as_echo_n "checking if we can lock with hard links... " >&6; }
+ hard_links=yes
+ $RM conftest*
+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
+ touch conftest.a
+ ln conftest.a conftest.b 2>&5 || hard_links=no
+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5
+$as_echo "$hard_links" >&6; }
+ if test "$hard_links" = no; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
+$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
+ need_locks=warn
+ fi
+else
+ need_locks=no
+fi
+
+
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
+
+ runpath_var=
+ allow_undefined_flag=
+ always_export_symbols=no
+ archive_cmds=
+ archive_expsym_cmds=
+ compiler_needs_object=no
+ enable_shared_with_static_runtimes=no
+ export_dynamic_flag_spec=
+ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+ hardcode_automatic=no
+ hardcode_direct=no
+ hardcode_direct_absolute=no
+ hardcode_libdir_flag_spec=
+ hardcode_libdir_separator=
+ hardcode_minus_L=no
+ hardcode_shlibpath_var=unsupported
+ inherit_rpath=no
+ link_all_deplibs=unknown
+ module_cmds=
+ module_expsym_cmds=
+ old_archive_from_new_cmds=
+ old_archive_from_expsyms_cmds=
+ thread_safe_flag_spec=
+ whole_archive_flag_spec=
+ # include_expsyms should be a list of space-separated symbols to be *always*
+ # included in the symbol list
+ include_expsyms=
+ # exclude_expsyms can be an extended regexp of symbols to exclude
+ # it will be wrapped by ` (' and `)$', so one must not match beginning or
+ # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
+ # as well as any symbol that contains `d'.
+ exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
+ # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+ # platforms (ab)use it in PIC code, but their linkers get confused if
+ # the symbol is explicitly referenced. Since portable code cannot
+ # rely on this symbol name, it's probably fine to never include it in
+ # preloaded symbol tables.
+ # Exclude shared library initialization/finalization symbols.
+ extract_expsyms_cmds=
+
+ case $host_os in
+ cygwin* | mingw* | pw32* | cegcc*)
+ # FIXME: the MSVC++ port hasn't been tested in a loooong time
+ # When not using gcc, we currently assume that we are using
+ # Microsoft Visual C++.
+ if test "$GCC" != yes; then
+ with_gnu_ld=no
+ fi
+ ;;
+ interix*)
+ # we just hope/assume this is gcc and not c89 (= MSVC++)
+ with_gnu_ld=yes
+ ;;
+ openbsd*)
+ with_gnu_ld=no
+ ;;
+ esac
+
+ ld_shlibs=yes
+
+ # On some targets, GNU ld is compatible enough with the native linker
+ # that we're better off using the native interface for both.
+ lt_use_gnu_ld_interface=no
+ if test "$with_gnu_ld" = yes; then
+ case $host_os in
+ aix*)
+ # The AIX port of GNU ld has always aspired to compatibility
+ # with the native linker. However, as the warning in the GNU ld
+ # block says, versions before 2.19.5* couldn't really create working
+ # shared libraries, regardless of the interface used.
+ case `$LD -v 2>&1` in
+ *\ \(GNU\ Binutils\)\ 2.19.5*) ;;
+ *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;;
+ *\ \(GNU\ Binutils\)\ [3-9]*) ;;
+ *)
+ lt_use_gnu_ld_interface=yes
+ ;;
+ esac
+ ;;
+ *)
+ lt_use_gnu_ld_interface=yes
+ ;;
+ esac
+ fi
+
+ if test "$lt_use_gnu_ld_interface" = yes; then
+ # If archive_cmds runs LD, not CC, wlarc should be empty
+ wlarc='${wl}'
+
+ # Set some defaults for GNU ld with shared library support. These
+ # are reset later if shared libraries are not supported. Putting them
+ # here allows them to be overridden if necessary.
+ runpath_var=LD_RUN_PATH
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ export_dynamic_flag_spec='${wl}--export-dynamic'
+ # ancient GNU ld didn't support --whole-archive et. al.
+ if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
+ whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ else
+ whole_archive_flag_spec=
+ fi
+ supports_anon_versioning=no
+ case `$LD -v 2>&1` in
+ *GNU\ gold*) supports_anon_versioning=yes ;;
+ *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
+ *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+ *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+ *\ 2.11.*) ;; # other 2.11 versions
+ *) supports_anon_versioning=yes ;;
+ esac
+
+ # See if GNU ld supports shared libraries.
+ case $host_os in
+ aix[3-9]*)
+ # On AIX/PPC, the GNU linker is very broken
+ if test "$host_cpu" != ia64; then
+ ld_shlibs=no
+ cat <<_LT_EOF 1>&2
+
+*** Warning: the GNU linker, at least up to release 2.19, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support. If you
+*** really care for shared libraries, you may want to install binutils
+*** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
+*** You will then need to restart the configuration process.
+
+_LT_EOF
+ fi
+ ;;
+
+ amigaos*)
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds=''
+ ;;
+ m68k)
+ archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ ;;
+ esac
+ ;;
+
+ beos*)
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ allow_undefined_flag=unsupported
+ # Joseph Beckenbach <jrb3 at best.com> says some releases of gcc
+ # support --undefined. This deserves some investigation. FIXME
+ archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+
+ cygwin* | mingw* | pw32* | cegcc*)
+ # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
+ # as there is no search path for DLLs.
+ hardcode_libdir_flag_spec='-L$libdir'
+ export_dynamic_flag_spec='${wl}--export-all-symbols'
+ allow_undefined_flag=unsupported
+ always_export_symbols=no
+ enable_shared_with_static_runtimes=yes
+ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols'
+ exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'
+
+ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ # If the export-symbols file already is a .def file (1st line
+ # is EXPORTS), use it as is; otherwise, prepend...
+ archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+ cp $export_symbols $output_objdir/$soname.def;
+ else
+ echo EXPORTS > $output_objdir/$soname.def;
+ cat $export_symbols >> $output_objdir/$soname.def;
+ fi~
+ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+
+ haiku*)
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ link_all_deplibs=yes
+ ;;
+
+ interix[3-9]*)
+ hardcode_direct=no
+ hardcode_shlibpath_var=no
+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+ export_dynamic_flag_spec='${wl}-E'
+ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+ # Instead, shared libraries are loaded at an image base (0x10000000 by
+ # default) and relocated if they conflict, which is a slow very memory
+ # consuming and fragmenting process. To avoid this, we pick a random,
+ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+ # time. Moving up from 0x10000000 also allows more sbrk(2) space.
+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ ;;
+
+ gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
+ tmp_diet=no
+ if test "$host_os" = linux-dietlibc; then
+ case $cc_basename in
+ diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn)
+ esac
+ fi
+ if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
+ && test "$tmp_diet" = no
+ then
+ tmp_addflag=' $pic_flag'
+ tmp_sharedflag='-shared'
+ case $cc_basename,$host_cpu in
+ pgcc*) # Portland Group C compiler
+ whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ tmp_addflag=' $pic_flag'
+ ;;
+ pgf77* | pgf90* | pgf95* | pgfortran*)
+ # Portland Group f77 and f90 compilers
+ whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ tmp_addflag=' $pic_flag -Mnomain' ;;
+ ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
+ tmp_addflag=' -i_dynamic' ;;
+ efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64
+ tmp_addflag=' -i_dynamic -nofor_main' ;;
+ ifc* | ifort*) # Intel Fortran compiler
+ tmp_addflag=' -nofor_main' ;;
+ lf95*) # Lahey Fortran 8.1
+ whole_archive_flag_spec=
+ tmp_sharedflag='--shared' ;;
+ xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below)
+ tmp_sharedflag='-qmkshrobj'
+ tmp_addflag= ;;
+ nvcc*) # Cuda Compiler Driver 2.2
+ whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ compiler_needs_object=yes
+ ;;
+ esac
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*) # Sun C 5.9
+ whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ compiler_needs_object=yes
+ tmp_sharedflag='-G' ;;
+ *Sun\ F*) # Sun Fortran 8.3
+ tmp_sharedflag='-G' ;;
+ esac
+ archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+
+ if test "x$supports_anon_versioning" = xyes; then
+ archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+ fi
+
+ case $cc_basename in
+ xlf* | bgf* | bgxlf* | mpixlf*)
+ # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
+ whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive'
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
+ if test "x$supports_anon_versioning" = xyes; then
+ archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+ fi
+ ;;
+ esac
+ else
+ ld_shlibs=no
+ fi
+ ;;
+
+ netbsd*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+ wlarc=
+ else
+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ fi
+ ;;
+
+ solaris*)
+ if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
+ ld_shlibs=no
+ cat <<_LT_EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems. Therefore, libtool
+*** is disabling shared libraries support. We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer. Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+ elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+
+ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+ case `$LD -v 2>&1` in
+ *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
+ ld_shlibs=no
+ cat <<_LT_EOF 1>&2
+
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** reliably create shared libraries on SCO systems. Therefore, libtool
+*** is disabling shared libraries support. We urge you to upgrade GNU
+*** binutils to release 2.16.91.0.3 or newer. Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+ ;;
+ *)
+ # For security reasons, it is highly recommended that you always
+ # use absolute paths for naming shared libraries, and exclude the
+ # DT_RUNPATH tag from executables and libraries. But doing so
+ # requires that you compile everything twice, which is a pain.
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ esac
+ ;;
+
+ sunos4*)
+ archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ wlarc=
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ *)
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ esac
+
+ if test "$ld_shlibs" = no; then
+ runpath_var=
+ hardcode_libdir_flag_spec=
+ export_dynamic_flag_spec=
+ whole_archive_flag_spec=
+ fi
+ else
+ # PORTME fill in a description of your system's linker (not GNU ld)
+ case $host_os in
+ aix3*)
+ allow_undefined_flag=unsupported
+ always_export_symbols=yes
+ archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+ # Note: this linker hardcodes the directories in LIBPATH if there
+ # are no directories specified by -L.
+ hardcode_minus_L=yes
+ if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+ # Neither direct hardcoding nor static linking is supported with a
+ # broken collect2.
+ hardcode_direct=unsupported
+ fi
+ ;;
+
+ aix[4-9]*)
+ if test "$host_cpu" = ia64; then
+ # On IA64, the linker does run time linking by default, so we don't
+ # have to do anything special.
+ aix_use_runtimelinking=no
+ exp_sym_flag='-Bexport'
+ no_entry_flag=""
+ else
+ # If we're using GNU nm, then we don't want the "-C" option.
+ # -C means demangle to AIX nm, but means don't demangle with GNU nm
+ # Also, AIX nm treats weak defined symbols like other global
+ # defined symbols, whereas GNU nm marks them as "W".
+ if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+ export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ else
+ export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ fi
+ aix_use_runtimelinking=no
+
+ # Test if we are trying to use run time linking or normal
+ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+ # need to do runtime linking.
+ case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
+ for ld_flag in $LDFLAGS; do
+ if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+ aix_use_runtimelinking=yes
+ break
+ fi
+ done
+ ;;
+ esac
+
+ exp_sym_flag='-bexport'
+ no_entry_flag='-bnoentry'
+ fi
+
+ # When large executables or shared objects are built, AIX ld can
+ # have problems creating the table of contents. If linking a library
+ # or program results in "error TOC overflow" add -mminimal-toc to
+ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
+ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+ archive_cmds=''
+ hardcode_direct=yes
+ hardcode_direct_absolute=yes
+ hardcode_libdir_separator=':'
+ link_all_deplibs=yes
+ file_list_spec='${wl}-f,'
+
+ if test "$GCC" = yes; then
+ case $host_os in aix4.[012]|aix4.[012].*)
+ # We only want to do this on AIX 4.2 and lower, the check
+ # below for broken collect2 doesn't work under 4.3+
+ collect2name=`${CC} -print-prog-name=collect2`
+ if test -f "$collect2name" &&
+ strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+ then
+ # We have reworked collect2
+ :
+ else
+ # We have old collect2
+ hardcode_direct=unsupported
+ # It fails to find uninstalled libraries when the uninstalled
+ # path is not listed in the libpath. Setting hardcode_minus_L
+ # to unsupported forces relinking
+ hardcode_minus_L=yes
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_libdir_separator=
+ fi
+ ;;
+ esac
+ shared_flag='-shared'
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag="$shared_flag "'${wl}-G'
+ fi
+ else
+ # not using gcc
+ if test "$host_cpu" = ia64; then
+ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+ # chokes on -Wl,-G. The following line is correct:
+ shared_flag='-G'
+ else
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag='${wl}-G'
+ else
+ shared_flag='${wl}-bM:SRE'
+ fi
+ fi
+ fi
+
+ export_dynamic_flag_spec='${wl}-bexpall'
+ # It seems that -bexpall does not export symbols beginning with
+ # underscore (_), so it is better to generate a list of symbols to export.
+ always_export_symbols=yes
+ if test "$aix_use_runtimelinking" = yes; then
+ # Warning - without using the other runtime loading flags (-brtl),
+ # -berok will link without error, but may produce a broken library.
+ allow_undefined_flag='-berok'
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+ if test "${lt_cv_aix_libpath+set}" = set; then
+ aix_libpath=$lt_cv_aix_libpath
+else
+ if ${lt_cv_aix_libpath_+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+ lt_aix_libpath_sed='
+ /Import File Strings/,/^$/ {
+ /^0/ {
+ s/^0 *\([^ ]*\) *$/\1/
+ p
+ }
+ }'
+ lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ # Check for a 64-bit object if we didn't find anything.
+ if test -z "$lt_cv_aix_libpath_"; then
+ lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ if test -z "$lt_cv_aix_libpath_"; then
+ lt_cv_aix_libpath_="/usr/lib:/lib"
+ fi
+
+fi
+
+ aix_libpath=$lt_cv_aix_libpath_
+fi
+
+ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+ archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ else
+ if test "$host_cpu" = ia64; then
+ hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
+ allow_undefined_flag="-z nodefs"
+ archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+ else
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+ if test "${lt_cv_aix_libpath+set}" = set; then
+ aix_libpath=$lt_cv_aix_libpath
+else
+ if ${lt_cv_aix_libpath_+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+ lt_aix_libpath_sed='
+ /Import File Strings/,/^$/ {
+ /^0/ {
+ s/^0 *\([^ ]*\) *$/\1/
+ p
+ }
+ }'
+ lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ # Check for a 64-bit object if we didn't find anything.
+ if test -z "$lt_cv_aix_libpath_"; then
+ lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ if test -z "$lt_cv_aix_libpath_"; then
+ lt_cv_aix_libpath_="/usr/lib:/lib"
+ fi
+
+fi
+
+ aix_libpath=$lt_cv_aix_libpath_
+fi
+
+ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+ # Warning - without using the other run time loading flags,
+ # -berok will link without error, but may produce a broken library.
+ no_undefined_flag=' ${wl}-bernotok'
+ allow_undefined_flag=' ${wl}-berok'
+ if test "$with_gnu_ld" = yes; then
+ # We only use this code for GNU lds that support --whole-archive.
+ whole_archive_flag_spec='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+ else
+ # Exported symbols can be pulled into shared objects from archives
+ whole_archive_flag_spec='$convenience'
+ fi
+ archive_cmds_need_lc=yes
+ # This is similar to how AIX traditionally builds its shared libraries.
+ archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+ fi
+ fi
+ ;;
+
+ amigaos*)
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds=''
+ ;;
+ m68k)
+ archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ ;;
+ esac
+ ;;
+
+ bsdi[45]*)
+ export_dynamic_flag_spec=-rdynamic
+ ;;
+
+ cygwin* | mingw* | pw32* | cegcc*)
+ # When not using gcc, we currently assume that we are using
+ # Microsoft Visual C++.
+ # hardcode_libdir_flag_spec is actually meaningless, as there is
+ # no search path for DLLs.
+ case $cc_basename in
+ cl*)
+ # Native MSVC
+ hardcode_libdir_flag_spec=' '
+ allow_undefined_flag=unsupported
+ always_export_symbols=yes
+ file_list_spec='@'
+ # Tell ltmain to make .lib files, not .a files.
+ libext=lib
+ # Tell ltmain to make .dll files, not .so files.
+ shrext_cmds=".dll"
+ # FIXME: Setting linknames here is a bad hack.
+ archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
+ archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+ sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
+ else
+ sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
+ fi~
+ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+ linknames='
+ # The linker will not automatically build a static lib if we build a DLL.
+ # _LT_TAGVAR(old_archive_from_new_cmds, )='true'
+ enable_shared_with_static_runtimes=yes
+ exclude_expsyms='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
+ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
+ # Don't use ranlib
+ old_postinstall_cmds='chmod 644 $oldlib'
+ postlink_cmds='lt_outputfile="@OUTPUT@"~
+ lt_tool_outputfile="@TOOL_OUTPUT@"~
+ case $lt_outputfile in
+ *.exe|*.EXE) ;;
+ *)
+ lt_outputfile="$lt_outputfile.exe"
+ lt_tool_outputfile="$lt_tool_outputfile.exe"
+ ;;
+ esac~
+ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
+ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+ $RM "$lt_outputfile.manifest";
+ fi'
+ ;;
+ *)
+ # Assume MSVC wrapper
+ hardcode_libdir_flag_spec=' '
+ allow_undefined_flag=unsupported
+ # Tell ltmain to make .lib files, not .a files.
+ libext=lib
+ # Tell ltmain to make .dll files, not .so files.
+ shrext_cmds=".dll"
+ # FIXME: Setting linknames here is a bad hack.
+ archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
+ # The linker will automatically build a .lib file if we build a DLL.
+ old_archive_from_new_cmds='true'
+ # FIXME: Should let the user specify the lib program.
+ old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
+ enable_shared_with_static_runtimes=yes
+ ;;
+ esac
+ ;;
+
+ darwin* | rhapsody*)
+
+
+ archive_cmds_need_lc=no
+ hardcode_direct=no
+ hardcode_automatic=yes
+ hardcode_shlibpath_var=unsupported
+ if test "$lt_cv_ld_force_load" = "yes"; then
+ whole_archive_flag_spec='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+
+ else
+ whole_archive_flag_spec=''
+ fi
+ link_all_deplibs=yes
+ allow_undefined_flag="$_lt_dar_allow_undefined"
+ case $cc_basename in
+ ifort*) _lt_dar_can_shared=yes ;;
+ *) _lt_dar_can_shared=$GCC ;;
+ esac
+ if test "$_lt_dar_can_shared" = "yes"; then
+ output_verbose_link_cmd=func_echo_all
+ archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+ module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+ archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+ module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+
+ else
+ ld_shlibs=no
+ fi
+
+ ;;
+
+ dgux*)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_shlibpath_var=no
+ ;;
+
+ # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+ # support. Future versions do this automatically, but an explicit c++rt0.o
+ # does not break anything, and helps significantly (at the cost of a little
+ # extra space).
+ freebsd2.2*)
+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+ freebsd2.*)
+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_direct=yes
+ hardcode_minus_L=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+ freebsd* | dragonfly*)
+ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ hpux9*)
+ if test "$GCC" = yes; then
+ archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ else
+ archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ fi
+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_separator=:
+ hardcode_direct=yes
+
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ hardcode_minus_L=yes
+ export_dynamic_flag_spec='${wl}-E'
+ ;;
+
+ hpux10*)
+ if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+ archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+ fi
+ if test "$with_gnu_ld" = no; then
+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_separator=:
+ hardcode_direct=yes
+ hardcode_direct_absolute=yes
+ export_dynamic_flag_spec='${wl}-E'
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ hardcode_minus_L=yes
+ fi
+ ;;
+
+ hpux11*)
+ if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+ case $host_cpu in
+ hppa*64*)
+ archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ ia64*)
+ archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ *)
+ archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ else
+ case $host_cpu in
+ hppa*64*)
+ archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ ia64*)
+ archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ *)
+
+ # Older versions of the 11.00 compiler do not understand -b yet
+ # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC understands -b" >&5
+$as_echo_n "checking if $CC understands -b... " >&6; }
+if ${lt_cv_prog_compiler__b+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler__b=no
+ save_LDFLAGS="$LDFLAGS"
+ LDFLAGS="$LDFLAGS -b"
+ echo "$lt_simple_link_test_code" > conftest.$ac_ext
+ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+ # The linker can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ if test -s conftest.err; then
+ # Append any errors to the config.log.
+ cat conftest.err 1>&5
+ $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if diff conftest.exp conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler__b=yes
+ fi
+ else
+ lt_cv_prog_compiler__b=yes
+ fi
+ fi
+ $RM -r conftest*
+ LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5
+$as_echo "$lt_cv_prog_compiler__b" >&6; }
+
+if test x"$lt_cv_prog_compiler__b" = xyes; then
+ archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+else
+ archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+fi
+
+ ;;
+ esac
+ fi
+ if test "$with_gnu_ld" = no; then
+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_separator=:
+
+ case $host_cpu in
+ hppa*64*|ia64*)
+ hardcode_direct=no
+ hardcode_shlibpath_var=no
+ ;;
+ *)
+ hardcode_direct=yes
+ hardcode_direct_absolute=yes
+ export_dynamic_flag_spec='${wl}-E'
+
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ hardcode_minus_L=yes
+ ;;
+ esac
+ fi
+ ;;
+
+ irix5* | irix6* | nonstopux*)
+ if test "$GCC" = yes; then
+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ # Try to use the -exported_symbol ld option, if it does not
+ # work, assume that -exports_file does not work either and
+ # implicitly export all symbols.
+ # This should be the same for all languages, so no per-tag cache variable.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5
+$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; }
+if ${lt_cv_irix_exported_symbol+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ save_LDFLAGS="$LDFLAGS"
+ LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+int foo (void) { return 0; }
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ lt_cv_irix_exported_symbol=yes
+else
+ lt_cv_irix_exported_symbol=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ LDFLAGS="$save_LDFLAGS"
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5
+$as_echo "$lt_cv_irix_exported_symbol" >&6; }
+ if test "$lt_cv_irix_exported_symbol" = yes; then
+ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+ fi
+ else
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+ fi
+ archive_cmds_need_lc='no'
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ inherit_rpath=yes
+ link_all_deplibs=yes
+ ;;
+
+ netbsd*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
+ else
+ archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
+ fi
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ newsos6)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_direct=yes
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ hardcode_shlibpath_var=no
+ ;;
+
+ *nto* | *qnx*)
+ ;;
+
+ openbsd*)
+ if test -f /usr/libexec/ld.so; then
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ hardcode_direct_absolute=yes
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+ export_dynamic_flag_spec='${wl}-E'
+ else
+ case $host_os in
+ openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_libdir_flag_spec='-R$libdir'
+ ;;
+ *)
+ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+ ;;
+ esac
+ fi
+ else
+ ld_shlibs=no
+ fi
+ ;;
+
+ os2*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ allow_undefined_flag=unsupported
+ archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+ old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+ ;;
+
+ osf3*)
+ if test "$GCC" = yes; then
+ allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ else
+ allow_undefined_flag=' -expect_unresolved \*'
+ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ fi
+ archive_cmds_need_lc='no'
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ ;;
+
+ osf4* | osf5*) # as osf3* with the addition of -msym flag
+ if test "$GCC" = yes; then
+ allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+ archive_cmds='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ else
+ allow_undefined_flag=' -expect_unresolved \*'
+ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
+ $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+
+ # Both c and cxx compiler support -rpath directly
+ hardcode_libdir_flag_spec='-rpath $libdir'
+ fi
+ archive_cmds_need_lc='no'
+ hardcode_libdir_separator=:
+ ;;
+
+ solaris*)
+ no_undefined_flag=' -z defs'
+ if test "$GCC" = yes; then
+ wlarc='${wl}'
+ archive_cmds='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ else
+ case `$CC -V 2>&1` in
+ *"Compilers 5.0"*)
+ wlarc=''
+ archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+ ;;
+ *)
+ wlarc='${wl}'
+ archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ ;;
+ esac
+ fi
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_shlibpath_var=no
+ case $host_os in
+ solaris2.[0-5] | solaris2.[0-5].*) ;;
+ *)
+ # The compiler driver will combine and reorder linker options,
+ # but understands `-z linker_flag'. GCC discards it without `$wl',
+ # but is careful enough not to reorder.
+ # Supported since Solaris 2.6 (maybe 2.5.1?)
+ if test "$GCC" = yes; then
+ whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+ else
+ whole_archive_flag_spec='-z allextract$convenience -z defaultextract'
+ fi
+ ;;
+ esac
+ link_all_deplibs=yes
+ ;;
+
+ sunos4*)
+ if test "x$host_vendor" = xsequent; then
+ # Use $CC to link under sequent, because it throws in some extra .o
+ # files that make .init and .fini sections work.
+ archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+ fi
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_direct=yes
+ hardcode_minus_L=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ sysv4)
+ case $host_vendor in
+ sni)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_direct=yes # is this really true???
+ ;;
+ siemens)
+ ## LD is ld it makes a PLAMLIB
+ ## CC just makes a GrossModule.
+ archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+ reload_cmds='$CC -r -o $output$reload_objs'
+ hardcode_direct=no
+ ;;
+ motorola)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_direct=no #Motorola manual says yes, but my tests say they lie
+ ;;
+ esac
+ runpath_var='LD_RUN_PATH'
+ hardcode_shlibpath_var=no
+ ;;
+
+ sysv4.3*)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_shlibpath_var=no
+ export_dynamic_flag_spec='-Bexport'
+ ;;
+
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_shlibpath_var=no
+ runpath_var=LD_RUN_PATH
+ hardcode_runpath_var=yes
+ ld_shlibs=yes
+ fi
+ ;;
+
+ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
+ no_undefined_flag='${wl}-z,text'
+ archive_cmds_need_lc=no
+ hardcode_shlibpath_var=no
+ runpath_var='LD_RUN_PATH'
+
+ if test "$GCC" = yes; then
+ archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ fi
+ ;;
+
+ sysv5* | sco3.2v5* | sco5v6*)
+ # Note: We can NOT use -z defs as we might desire, because we do not
+ # link with -lc, and that would cause any symbols used from libc to
+ # always be unresolved, which means just about no library would
+ # ever link correctly. If we're not using GNU ld we use -z text
+ # though, which does catch some bad symbols but isn't as heavy-handed
+ # as -z defs.
+ no_undefined_flag='${wl}-z,text'
+ allow_undefined_flag='${wl}-z,nodefs'
+ archive_cmds_need_lc=no
+ hardcode_shlibpath_var=no
+ hardcode_libdir_flag_spec='${wl}-R,$libdir'
+ hardcode_libdir_separator=':'
+ link_all_deplibs=yes
+ export_dynamic_flag_spec='${wl}-Bexport'
+ runpath_var='LD_RUN_PATH'
+
+ if test "$GCC" = yes; then
+ archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ fi
+ ;;
+
+ uts4*)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_shlibpath_var=no
+ ;;
+
+ *)
+ ld_shlibs=no
+ ;;
+ esac
+
+ if test x$host_vendor = xsni; then
+ case $host in
+ sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+ export_dynamic_flag_spec='${wl}-Blargedynsym'
+ ;;
+ esac
+ fi
+ fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5
+$as_echo "$ld_shlibs" >&6; }
+test "$ld_shlibs" = no && can_build_shared=no
+
+with_gnu_ld=$with_gnu_ld
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+#
+# Do we need to explicitly link libc?
+#
+case "x$archive_cmds_need_lc" in
+x|xyes)
+ # Assume -lc should be added
+ archive_cmds_need_lc=yes
+
+ if test "$enable_shared" = yes && test "$GCC" = yes; then
+ case $archive_cmds in
+ *'~'*)
+ # FIXME: we may have to deal with multi-command sequences.
+ ;;
+ '$CC '*)
+ # Test whether the compiler implicitly links with -lc since on some
+ # systems, -lgcc has to come before -lc. If gcc already passes -lc
+ # to ld, don't add -lc before -lgcc.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5
+$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
+if ${lt_cv_archive_cmds_need_lc+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ $RM conftest*
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } 2>conftest.err; then
+ soname=conftest
+ lib=conftest
+ libobjs=conftest.$ac_objext
+ deplibs=
+ wl=$lt_prog_compiler_wl
+ pic_flag=$lt_prog_compiler_pic
+ compiler_flags=-v
+ linker_flags=-v
+ verstring=
+ output_objdir=.
+ libname=conftest
+ lt_save_allow_undefined_flag=$allow_undefined_flag
+ allow_undefined_flag=
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5
+ (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+ then
+ lt_cv_archive_cmds_need_lc=no
+ else
+ lt_cv_archive_cmds_need_lc=yes
+ fi
+ allow_undefined_flag=$lt_save_allow_undefined_flag
+ else
+ cat conftest.err 1>&5
+ fi
+ $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc" >&5
+$as_echo "$lt_cv_archive_cmds_need_lc" >&6; }
+ archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc
+ ;;
+ esac
+ fi
+ ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5
+$as_echo_n "checking dynamic linker characteristics... " >&6; }
+
+if test "$GCC" = yes; then
+ case $host_os in
+ darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
+ *) lt_awk_arg="/^libraries:/" ;;
+ esac
+ case $host_os in
+ mingw* | cegcc*) lt_sed_strip_eq="s,=\([A-Za-z]:\),\1,g" ;;
+ *) lt_sed_strip_eq="s,=/,/,g" ;;
+ esac
+ lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
+ case $lt_search_path_spec in
+ *\;*)
+ # if the path contains ";" then we assume it to be the separator
+ # otherwise default to the standard path separator (i.e. ":") - it is
+ # assumed that no part of a normal pathname contains ";" but that should
+ # okay in the real world where ";" in dirpaths is itself problematic.
+ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'`
+ ;;
+ *)
+ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"`
+ ;;
+ esac
+ # Ok, now we have the path, separated by spaces, we can step through it
+ # and add multilib dir if necessary.
+ lt_tmp_lt_search_path_spec=
+ lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+ for lt_sys_path in $lt_search_path_spec; do
+ if test -d "$lt_sys_path/$lt_multi_os_dir"; then
+ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
+ else
+ test -d "$lt_sys_path" && \
+ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
+ fi
+ done
+ lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
+BEGIN {RS=" "; FS="/|\n";} {
+ lt_foo="";
+ lt_count=0;
+ for (lt_i = NF; lt_i > 0; lt_i--) {
+ if ($lt_i != "" && $lt_i != ".") {
+ if ($lt_i == "..") {
+ lt_count++;
+ } else {
+ if (lt_count == 0) {
+ lt_foo="/" $lt_i lt_foo;
+ } else {
+ lt_count--;
+ }
+ }
+ }
+ }
+ if (lt_foo != "") { lt_freq[lt_foo]++; }
+ if (lt_freq[lt_foo] == 1) { print lt_foo; }
+}'`
+ # AWK program above erroneously prepends '/' to C:/dos/paths
+ # for these hosts.
+ case $host_os in
+ mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
+ $SED 's,/\([A-Za-z]:\),\1,g'` ;;
+ esac
+ sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
+else
+ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+fi
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=".so"
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+need_lib_prefix=unknown
+hardcode_into_libs=no
+
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
+
+case $host_os in
+aix3*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+ shlibpath_var=LIBPATH
+
+ # AIX 3 has no versioning support, so we append a major version to the name.
+ soname_spec='${libname}${release}${shared_ext}$major'
+ ;;
+
+aix[4-9]*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ hardcode_into_libs=yes
+ if test "$host_cpu" = ia64; then
+ # AIX 5 supports IA64
+ library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ else
+ # With GCC up to 2.95.x, collect2 would create an import file
+ # for dependence libraries. The import file would start with
+ # the line `#! .'. This would cause the generated library to
+ # depend on `.', always an invalid library. This was fixed in
+ # development snapshots of GCC prior to 3.0.
+ case $host_os in
+ aix4 | aix4.[01] | aix4.[01].*)
+ if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+ echo ' yes '
+ echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
+ :
+ else
+ can_build_shared=no
+ fi
+ ;;
+ esac
+ # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+ # soname into executable. Probably we can add versioning support to
+ # collect2, so additional links can be useful in future.
+ if test "$aix_use_runtimelinking" = yes; then
+ # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+ # instead of lib<name>.a to let people know that these are not
+ # typical AIX shared libraries.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ else
+ # We preserve .a as extension for shared libraries through AIX4.2
+ # and later when we are not doing run time linking.
+ library_names_spec='${libname}${release}.a $libname.a'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ fi
+ shlibpath_var=LIBPATH
+ fi
+ ;;
+
+amigaos*)
+ case $host_cpu in
+ powerpc)
+ # Since July 2007 AmigaOS4 officially supports .so libraries.
+ # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ ;;
+ m68k)
+ library_names_spec='$libname.ixlibrary $libname.a'
+ # Create ${libname}_ixlibrary.a entries in /sys/libs.
+ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+ ;;
+ esac
+ ;;
+
+beos*)
+ library_names_spec='${libname}${shared_ext}'
+ dynamic_linker="$host_os ld.so"
+ shlibpath_var=LIBRARY_PATH
+ ;;
+
+bsdi[45]*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+ sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+ # the default ld.so.conf also contains /usr/contrib/lib and
+ # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+ # libtool to hard-code these into programs
+ ;;
+
+cygwin* | mingw* | pw32* | cegcc*)
+ version_type=windows
+ shrext_cmds=".dll"
+ need_version=no
+ need_lib_prefix=no
+
+ case $GCC,$cc_basename in
+ yes,*)
+ # gcc
+ library_names_spec='$libname.dll.a'
+ # DLL is installed to $(libdir)/../bin by postinstall_cmds
+ postinstall_cmds='base_file=`basename \${file}`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+ dldir=$destdir/`dirname \$dlpath`~
+ test -d \$dldir || mkdir -p \$dldir~
+ $install_prog $dir/$dlname \$dldir/$dlname~
+ chmod a+x \$dldir/$dlname~
+ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+ eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+ fi'
+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+ dlpath=$dir/\$dldll~
+ $RM \$dlpath'
+ shlibpath_overrides_runpath=yes
+
+ case $host_os in
+ cygwin*)
+ # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+ soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+
+ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"
+ ;;
+ mingw* | cegcc*)
+ # MinGW DLLs use traditional 'lib' prefix
+ soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+ ;;
+ pw32*)
+ # pw32 DLLs use 'pw' prefix rather than 'lib'
+ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+ ;;
+ esac
+ dynamic_linker='Win32 ld.exe'
+ ;;
+
+ *,cl*)
+ # Native MSVC
+ libname_spec='$name'
+ soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+ library_names_spec='${libname}.dll.lib'
+
+ case $build_os in
+ mingw*)
+ sys_lib_search_path_spec=
+ lt_save_ifs=$IFS
+ IFS=';'
+ for lt_path in $LIB
+ do
+ IFS=$lt_save_ifs
+ # Let DOS variable expansion print the short 8.3 style file name.
+ lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
+ sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
+ done
+ IFS=$lt_save_ifs
+ # Convert to MSYS style.
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'`
+ ;;
+ cygwin*)
+ # Convert to unix form, then to dos form, then back to unix form
+ # but this time dos style (no spaces!) so that the unix form looks
+ # like /cygdrive/c/PROGRA~1:/cygdr...
+ sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
+ sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
+ sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+ ;;
+ *)
+ sys_lib_search_path_spec="$LIB"
+ if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
+ # It is most probably a Windows format PATH.
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+ else
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+ fi
+ # FIXME: find the short name or the path components, as spaces are
+ # common. (e.g. "Program Files" -> "PROGRA~1")
+ ;;
+ esac
+
+ # DLL is installed to $(libdir)/../bin by postinstall_cmds
+ postinstall_cmds='base_file=`basename \${file}`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+ dldir=$destdir/`dirname \$dlpath`~
+ test -d \$dldir || mkdir -p \$dldir~
+ $install_prog $dir/$dlname \$dldir/$dlname'
+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+ dlpath=$dir/\$dldll~
+ $RM \$dlpath'
+ shlibpath_overrides_runpath=yes
+ dynamic_linker='Win32 link.exe'
+ ;;
+
+ *)
+ # Assume MSVC wrapper
+ library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
+ dynamic_linker='Win32 ld.exe'
+ ;;
+ esac
+ # FIXME: first we should search . and the directory the executable is in
+ shlibpath_var=PATH
+ ;;
+
+darwin* | rhapsody*)
+ dynamic_linker="$host_os dyld"
+ version_type=darwin
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+ soname_spec='${libname}${release}${major}$shared_ext'
+ shlibpath_overrides_runpath=yes
+ shlibpath_var=DYLD_LIBRARY_PATH
+ shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+
+ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"
+ sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+ ;;
+
+dgux*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ ;;
+
+freebsd* | dragonfly*)
+ # DragonFly does not have aout. When/if they implement a new
+ # versioning mechanism, adjust this.
+ if test -x /usr/bin/objformat; then
+ objformat=`/usr/bin/objformat`
+ else
+ case $host_os in
+ freebsd[23].*) objformat=aout ;;
+ *) objformat=elf ;;
+ esac
+ fi
+ version_type=freebsd-$objformat
+ case $version_type in
+ freebsd-elf*)
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+ need_version=no
+ need_lib_prefix=no
+ ;;
+ freebsd-*)
+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+ need_version=yes
+ ;;
+ esac
+ shlibpath_var=LD_LIBRARY_PATH
+ case $host_os in
+ freebsd2.*)
+ shlibpath_overrides_runpath=yes
+ ;;
+ freebsd3.[01]* | freebsdelf3.[01]*)
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+ freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
+ freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+ *) # from 4.6 on, and DragonFly
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+ esac
+ ;;
+
+gnu*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+
+haiku*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ dynamic_linker="$host_os runtime_loader"
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
+ hardcode_into_libs=yes
+ ;;
+
+hpux9* | hpux10* | hpux11*)
+ # Give a soname corresponding to the major version so that dld.sl refuses to
+ # link against other versions.
+ version_type=sunos
+ need_lib_prefix=no
+ need_version=no
+ case $host_cpu in
+ ia64*)
+ shrext_cmds='.so'
+ hardcode_into_libs=yes
+ dynamic_linker="$host_os dld.so"
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ if test "X$HPUX_IA64_MODE" = X32; then
+ sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+ else
+ sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+ fi
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ ;;
+ hppa*64*)
+ shrext_cmds='.sl'
+ hardcode_into_libs=yes
+ dynamic_linker="$host_os dld.sl"
+ shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ ;;
+ *)
+ shrext_cmds='.sl'
+ dynamic_linker="$host_os dld.sl"
+ shlibpath_var=SHLIB_PATH
+ shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ ;;
+ esac
+ # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
+ postinstall_cmds='chmod 555 $lib'
+ # or fails outright, so override atomically:
+ install_override_mode=555
+ ;;
+
+interix[3-9]*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+
+irix5* | irix6* | nonstopux*)
+ case $host_os in
+ nonstopux*) version_type=nonstopux ;;
+ *)
+ if test "$lt_cv_prog_gnu_ld" = yes; then
+ version_type=linux # correct to gnu/linux during the next big refactor
+ else
+ version_type=irix
+ fi ;;
+ esac
+ need_lib_prefix=no
+ need_version=no
+ soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+ case $host_os in
+ irix5* | nonstopux*)
+ libsuff= shlibsuff=
+ ;;
+ *)
+ case $LD in # libtool.m4 will add one of these switches to LD
+ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+ libsuff= shlibsuff= libmagic=32-bit;;
+ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+ libsuff=32 shlibsuff=N32 libmagic=N32;;
+ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+ libsuff=64 shlibsuff=64 libmagic=64-bit;;
+ *) libsuff= shlibsuff= libmagic=never-match;;
+ esac
+ ;;
+ esac
+ shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+ shlibpath_overrides_runpath=no
+ sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+ sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+ hardcode_into_libs=yes
+ ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+ dynamic_linker=no
+ ;;
+
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+
+ # Some binutils ld are patched to set DT_RUNPATH
+ if ${lt_cv_shlibpath_overrides_runpath+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_shlibpath_overrides_runpath=no
+ save_LDFLAGS=$LDFLAGS
+ save_libdir=$libdir
+ eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \
+ LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\""
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then :
+ lt_cv_shlibpath_overrides_runpath=yes
+fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ LDFLAGS=$save_LDFLAGS
+ libdir=$save_libdir
+
+fi
+
+ shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
+
+ # This implies no fast_install, which is unacceptable.
+ # Some rework will be needed to allow for fast_install
+ # before this can be enabled.
+ hardcode_into_libs=yes
+
+ # Append ld.so.conf contents to the search path
+ if test -f /etc/ld.so.conf; then
+ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
+ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+ fi
+
+ # We used to test for /lib/ld.so.1 and disable shared libraries on
+ # powerpc, because MkLinux only supported shared libraries with the
+ # GNU dynamic linker. Since this was broken with cross compilers,
+ # most powerpc-linux boxes support dynamic linking these days and
+ # people can always --disable-shared, the test was removed, and we
+ # assume the GNU/Linux dynamic linker is in use.
+ dynamic_linker='GNU/Linux ld.so'
+ ;;
+
+netbsd*)
+ version_type=sunos
+ need_lib_prefix=no
+ need_version=no
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+ dynamic_linker='NetBSD (a.out) ld.so'
+ else
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ dynamic_linker='NetBSD ld.elf_so'
+ fi
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+
+newsos6)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ ;;
+
+*nto* | *qnx*)
+ version_type=qnx
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ dynamic_linker='ldqnx.so'
+ ;;
+
+openbsd*)
+ version_type=sunos
+ sys_lib_dlsearch_path_spec="/usr/lib"
+ need_lib_prefix=no
+ # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+ case $host_os in
+ openbsd3.3 | openbsd3.3.*) need_version=yes ;;
+ *) need_version=no ;;
+ esac
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ case $host_os in
+ openbsd2.[89] | openbsd2.[89].*)
+ shlibpath_overrides_runpath=no
+ ;;
+ *)
+ shlibpath_overrides_runpath=yes
+ ;;
+ esac
+ else
+ shlibpath_overrides_runpath=yes
+ fi
+ ;;
+
+os2*)
+ libname_spec='$name'
+ shrext_cmds=".dll"
+ need_lib_prefix=no
+ library_names_spec='$libname${shared_ext} $libname.a'
+ dynamic_linker='OS/2 ld.exe'
+ shlibpath_var=LIBPATH
+ ;;
+
+osf3* | osf4* | osf5*)
+ version_type=osf
+ need_lib_prefix=no
+ need_version=no
+ soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+ sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+ ;;
+
+rdos*)
+ dynamic_linker=no
+ ;;
+
+solaris*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ # ldd complains unless libraries are executable
+ postinstall_cmds='chmod +x $lib'
+ ;;
+
+sunos4*)
+ version_type=sunos
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ if test "$with_gnu_ld" = yes; then
+ need_lib_prefix=no
+ fi
+ need_version=yes
+ ;;
+
+sysv4 | sysv4.3*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ case $host_vendor in
+ sni)
+ shlibpath_overrides_runpath=no
+ need_lib_prefix=no
+ runpath_var=LD_RUN_PATH
+ ;;
+ siemens)
+ need_lib_prefix=no
+ ;;
+ motorola)
+ need_lib_prefix=no
+ need_version=no
+ shlibpath_overrides_runpath=no
+ sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+ ;;
+ esac
+ ;;
+
+sysv4*MP*)
+ if test -d /usr/nec ;then
+ version_type=linux # correct to gnu/linux during the next big refactor
+ library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
+ soname_spec='$libname${shared_ext}.$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ fi
+ ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+ version_type=freebsd-elf
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ if test "$with_gnu_ld" = yes; then
+ sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+ else
+ sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+ case $host_os in
+ sco3.2v5*)
+ sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+ ;;
+ esac
+ fi
+ sys_lib_dlsearch_path_spec='/usr/lib'
+ ;;
+
+tpf*)
+ # TPF is a cross-target only. Preferred cross-host = GNU/Linux.
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+
+uts4*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ ;;
+
+*)
+ dynamic_linker=no
+ ;;
+esac
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5
+$as_echo "$dynamic_linker" >&6; }
+test "$dynamic_linker" = no && can_build_shared=no
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
+ sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+fi
+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
+ sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5
+$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
+hardcode_action=
+if test -n "$hardcode_libdir_flag_spec" ||
+ test -n "$runpath_var" ||
+ test "X$hardcode_automatic" = "Xyes" ; then
+
+ # We can hardcode non-existent directories.
+ if test "$hardcode_direct" != no &&
+ # If the only mechanism to avoid hardcoding is shlibpath_var, we
+ # have to relink, otherwise we might link with an installed library
+ # when we should be linking with a yet-to-be-installed one
+ ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no &&
+ test "$hardcode_minus_L" != no; then
+ # Linking always hardcodes the temporary library directory.
+ hardcode_action=relink
+ else
+ # We can link without hardcoding, and we can hardcode nonexisting dirs.
+ hardcode_action=immediate
+ fi
+else
+ # We cannot hardcode anything, or else we can only hardcode existing
+ # directories.
+ hardcode_action=unsupported
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5
+$as_echo "$hardcode_action" >&6; }
+
+if test "$hardcode_action" = relink ||
+ test "$inherit_rpath" = yes; then
+ # Fast installation is not supported
+ enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+ test "$enable_shared" = no; then
+ # Fast installation is not necessary
+ enable_fast_install=needless
+fi
+
+
+
+
+
+
+ if test "x$enable_dlopen" != xyes; then
+ enable_dlopen=unknown
+ enable_dlopen_self=unknown
+ enable_dlopen_self_static=unknown
+else
+ lt_cv_dlopen=no
+ lt_cv_dlopen_libs=
+
+ case $host_os in
+ beos*)
+ lt_cv_dlopen="load_add_on"
+ lt_cv_dlopen_libs=
+ lt_cv_dlopen_self=yes
+ ;;
+
+ mingw* | pw32* | cegcc*)
+ lt_cv_dlopen="LoadLibrary"
+ lt_cv_dlopen_libs=
+ ;;
+
+ cygwin*)
+ lt_cv_dlopen="dlopen"
+ lt_cv_dlopen_libs=
+ ;;
+
+ darwin*)
+ # if libdl is installed we need to link against it
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
+$as_echo_n "checking for dlopen in -ldl... " >&6; }
+if ${ac_cv_lib_dl_dlopen+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldl $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_dl_dlopen=yes
+else
+ ac_cv_lib_dl_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
+$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
+if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
+ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+else
+
+ lt_cv_dlopen="dyld"
+ lt_cv_dlopen_libs=
+ lt_cv_dlopen_self=yes
+
+fi
+
+ ;;
+
+ *)
+ ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load"
+if test "x$ac_cv_func_shl_load" = xyes; then :
+ lt_cv_dlopen="shl_load"
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5
+$as_echo_n "checking for shl_load in -ldld... " >&6; }
+if ${ac_cv_lib_dld_shl_load+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldld $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char shl_load ();
+int
+main ()
+{
+return shl_load ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_dld_shl_load=yes
+else
+ ac_cv_lib_dld_shl_load=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5
+$as_echo "$ac_cv_lib_dld_shl_load" >&6; }
+if test "x$ac_cv_lib_dld_shl_load" = xyes; then :
+ lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
+else
+ ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen"
+if test "x$ac_cv_func_dlopen" = xyes; then :
+ lt_cv_dlopen="dlopen"
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
+$as_echo_n "checking for dlopen in -ldl... " >&6; }
+if ${ac_cv_lib_dl_dlopen+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldl $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_dl_dlopen=yes
+else
+ ac_cv_lib_dl_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
+$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
+if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
+ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5
+$as_echo_n "checking for dlopen in -lsvld... " >&6; }
+if ${ac_cv_lib_svld_dlopen+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lsvld $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_svld_dlopen=yes
+else
+ ac_cv_lib_svld_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5
+$as_echo "$ac_cv_lib_svld_dlopen" >&6; }
+if test "x$ac_cv_lib_svld_dlopen" = xyes; then :
+ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5
+$as_echo_n "checking for dld_link in -ldld... " >&6; }
+if ${ac_cv_lib_dld_dld_link+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldld $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dld_link ();
+int
+main ()
+{
+return dld_link ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_dld_dld_link=yes
+else
+ ac_cv_lib_dld_dld_link=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5
+$as_echo "$ac_cv_lib_dld_dld_link" >&6; }
+if test "x$ac_cv_lib_dld_dld_link" = xyes; then :
+ lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+ ;;
+ esac
+
+ if test "x$lt_cv_dlopen" != xno; then
+ enable_dlopen=yes
+ else
+ enable_dlopen=no
+ fi
+
+ case $lt_cv_dlopen in
+ dlopen)
+ save_CPPFLAGS="$CPPFLAGS"
+ test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+
+ save_LDFLAGS="$LDFLAGS"
+ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
+
+ save_LIBS="$LIBS"
+ LIBS="$lt_cv_dlopen_libs $LIBS"
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5
+$as_echo_n "checking whether a program can dlopen itself... " >&6; }
+if ${lt_cv_dlopen_self+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test "$cross_compiling" = yes; then :
+ lt_cv_dlopen_self=cross
+else
+ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+ lt_status=$lt_dlunknown
+ cat > conftest.$ac_ext <<_LT_EOF
+#line $LINENO "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+# define LT_DLGLOBAL RTLD_GLOBAL
+#else
+# ifdef DL_GLOBAL
+# define LT_DLGLOBAL DL_GLOBAL
+# else
+# define LT_DLGLOBAL 0
+# endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+ find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+# ifdef RTLD_LAZY
+# define LT_DLLAZY_OR_NOW RTLD_LAZY
+# else
+# ifdef DL_LAZY
+# define LT_DLLAZY_OR_NOW DL_LAZY
+# else
+# ifdef RTLD_NOW
+# define LT_DLLAZY_OR_NOW RTLD_NOW
+# else
+# ifdef DL_NOW
+# define LT_DLLAZY_OR_NOW DL_NOW
+# else
+# define LT_DLLAZY_OR_NOW 0
+# endif
+# endif
+# endif
+# endif
+#endif
+
+/* When -fvisbility=hidden is used, assume the code has been annotated
+ correspondingly for the symbols needed. */
+#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+int fnord () __attribute__((visibility("default")));
+#endif
+
+int fnord () { return 42; }
+int main ()
+{
+ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+ int status = $lt_dlunknown;
+
+ if (self)
+ {
+ if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
+ else
+ {
+ if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+ else puts (dlerror ());
+ }
+ /* dlclose (self); */
+ }
+ else
+ puts (dlerror ());
+
+ return status;
+}
+_LT_EOF
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
+ (./conftest; exit; ) >&5 2>/dev/null
+ lt_status=$?
+ case x$lt_status in
+ x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
+ x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;;
+ x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;;
+ esac
+ else :
+ # compilation failed
+ lt_cv_dlopen_self=no
+ fi
+fi
+rm -fr conftest*
+
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5
+$as_echo "$lt_cv_dlopen_self" >&6; }
+
+ if test "x$lt_cv_dlopen_self" = xyes; then
+ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5
+$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; }
+if ${lt_cv_dlopen_self_static+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test "$cross_compiling" = yes; then :
+ lt_cv_dlopen_self_static=cross
+else
+ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+ lt_status=$lt_dlunknown
+ cat > conftest.$ac_ext <<_LT_EOF
+#line $LINENO "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+# define LT_DLGLOBAL RTLD_GLOBAL
+#else
+# ifdef DL_GLOBAL
+# define LT_DLGLOBAL DL_GLOBAL
+# else
+# define LT_DLGLOBAL 0
+# endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+ find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+# ifdef RTLD_LAZY
+# define LT_DLLAZY_OR_NOW RTLD_LAZY
+# else
+# ifdef DL_LAZY
+# define LT_DLLAZY_OR_NOW DL_LAZY
+# else
+# ifdef RTLD_NOW
+# define LT_DLLAZY_OR_NOW RTLD_NOW
+# else
+# ifdef DL_NOW
+# define LT_DLLAZY_OR_NOW DL_NOW
+# else
+# define LT_DLLAZY_OR_NOW 0
+# endif
+# endif
+# endif
+# endif
+#endif
+
+/* When -fvisbility=hidden is used, assume the code has been annotated
+ correspondingly for the symbols needed. */
+#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+int fnord () __attribute__((visibility("default")));
+#endif
+
+int fnord () { return 42; }
+int main ()
+{
+ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+ int status = $lt_dlunknown;
+
+ if (self)
+ {
+ if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
+ else
+ {
+ if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+ else puts (dlerror ());
+ }
+ /* dlclose (self); */
+ }
+ else
+ puts (dlerror ());
+
+ return status;
+}
+_LT_EOF
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
+ (./conftest; exit; ) >&5 2>/dev/null
+ lt_status=$?
+ case x$lt_status in
+ x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
+ x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;;
+ x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;;
+ esac
+ else :
+ # compilation failed
+ lt_cv_dlopen_self_static=no
+ fi
+fi
+rm -fr conftest*
+
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5
+$as_echo "$lt_cv_dlopen_self_static" >&6; }
+ fi
+
+ CPPFLAGS="$save_CPPFLAGS"
+ LDFLAGS="$save_LDFLAGS"
+ LIBS="$save_LIBS"
+ ;;
+ esac
+
+ case $lt_cv_dlopen_self in
+ yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
+ *) enable_dlopen_self=unknown ;;
+ esac
+
+ case $lt_cv_dlopen_self_static in
+ yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
+ *) enable_dlopen_self_static=unknown ;;
+ esac
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+striplib=
+old_striplib=
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5
+$as_echo_n "checking whether stripping libraries is possible... " >&6; }
+if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
+ test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+ test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+# FIXME - insert some real tests, host_os isn't really good enough
+ case $host_os in
+ darwin*)
+ if test -n "$STRIP" ; then
+ striplib="$STRIP -x"
+ old_striplib="$STRIP -S"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ fi
+ ;;
+ *)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ ;;
+ esac
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+ # Report which library types will actually be built
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5
+$as_echo_n "checking if libtool supports shared libraries... " >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5
+$as_echo "$can_build_shared" >&6; }
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5
+$as_echo_n "checking whether to build shared libraries... " >&6; }
+ test "$can_build_shared" = "no" && enable_shared=no
+
+ # On AIX, shared libraries and static libraries use the same namespace, and
+ # are all built from PIC.
+ case $host_os in
+ aix3*)
+ test "$enable_shared" = yes && enable_static=no
+ if test -n "$RANLIB"; then
+ archive_cmds="$archive_cmds~\$RANLIB \$lib"
+ postinstall_cmds='$RANLIB $lib'
+ fi
+ ;;
+
+ aix[4-9]*)
+ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+ test "$enable_shared" = yes && enable_static=no
+ fi
+ ;;
+ esac
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5
+$as_echo "$enable_shared" >&6; }
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5
+$as_echo_n "checking whether to build static libraries... " >&6; }
+ # Make sure either enable_shared or enable_static is yes.
+ test "$enable_shared" = yes || enable_static=yes
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5
+$as_echo "$enable_static" >&6; }
+
+
+
+
+fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+CC="$lt_save_CC"
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ ac_config_commands="$ac_config_commands libtool"
+
+
+
+
+# Only expand once:
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5
+$as_echo_n "checking whether ln -s works... " >&6; }
+LN_S=$as_ln_s
+if test "$LN_S" = "ln -s"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5
+$as_echo "no, using $LN_S" >&6; }
+fi
+
+for ac_prog in 'bison -y' byacc
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_YACC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$YACC"; then
+ ac_cv_prog_YACC="$YACC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_YACC="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+YACC=$ac_cv_prog_YACC
+if test -n "$YACC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $YACC" >&5
+$as_echo "$YACC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$YACC" && break
+done
+test -n "$YACC" || YACC="yacc"
+
+
+am__api_version='1.12'
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5
+$as_echo_n "checking whether build environment is sane... " >&6; }
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name. Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+ *[\\\"\#\$\&\'\`$am_lf]*)
+ as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;;
+esac
+case $srcdir in
+ *[\\\"\#\$\&\'\`$am_lf\ \ ]*)
+ as_fn_error $? "unsafe srcdir value: '$srcdir'" "$LINENO" 5;;
+esac
+
+# Do 'set' in a subshell so we don't clobber the current shell's
+# arguments. Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+ am_has_slept=no
+ for am_try in 1 2; do
+ echo "timestamp, slept: $am_has_slept" > conftest.file
+ set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+ if test "$*" = "X"; then
+ # -L didn't work.
+ set X `ls -t "$srcdir/configure" conftest.file`
+ fi
+ if test "$*" != "X $srcdir/configure conftest.file" \
+ && test "$*" != "X conftest.file $srcdir/configure"; then
+
+ # If neither matched, then we have a broken ls. This can happen
+ # if, for instance, CONFIG_SHELL is bash and it inherits a
+ # broken ls alias from the environment. This has actually
+ # happened. Such a system could not be considered "sane".
+ as_fn_error $? "ls -t appears to fail. Make sure there is not a broken
+ alias in your environment" "$LINENO" 5
+ fi
+ if test "$2" = conftest.file || test $am_try -eq 2; then
+ break
+ fi
+ # Just in case.
+ sleep 1
+ am_has_slept=yes
+ done
+ test "$2" = conftest.file
+ )
+then
+ # Ok.
+ :
+else
+ as_fn_error $? "newly created file is older than distributed files!
+Check your system clock" "$LINENO" 5
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+# If we didn't sleep, we still need to ensure time stamps of config.status and
+# generated files are strictly newer.
+am_sleep_pid=
+if grep 'slept: no' conftest.file >/dev/null 2>&1; then
+ ( sleep 1 ) &
+ am_sleep_pid=$!
+fi
+
+rm -f conftest.file
+
+test "$program_prefix" != NONE &&
+ program_transform_name="s&^&$program_prefix&;$program_transform_name"
+# Use a double $ so make ignores it.
+test "$program_suffix" != NONE &&
+ program_transform_name="s&\$&$program_suffix&;$program_transform_name"
+# Double any \ or $.
+# By default was `s,x,x', remove it if useless.
+ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
+program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
+
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+
+if test x"${MISSING+set}" != xset; then
+ case $am_aux_dir in
+ *\ * | *\ *)
+ MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+ *)
+ MISSING="\${SHELL} $am_aux_dir/missing" ;;
+ esac
+fi
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+ am_missing_run="$MISSING --run "
+else
+ am_missing_run=
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5
+$as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;}
+fi
+
+if test x"${install_sh}" != xset; then
+ case $am_aux_dir in
+ *\ * | *\ *)
+ install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+ *)
+ install_sh="\${SHELL} $am_aux_dir/install-sh"
+ esac
+fi
+
+# Installed binaries are usually stripped using 'strip' when the user
+# run "make install-strip". However 'strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the 'STRIP' environment variable to overrule this program.
+if test "$cross_compiling" != no; then
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_STRIP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$STRIP"; then
+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+ ac_ct_STRIP=$STRIP
+ # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_STRIP"; then
+ ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_STRIP="strip"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_STRIP" = x; then
+ STRIP=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ STRIP=$ac_ct_STRIP
+ fi
+else
+ STRIP="$ac_cv_prog_STRIP"
+fi
+
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5
+$as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
+if test -z "$MKDIR_P"; then
+ if ${ac_cv_path_mkdir+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in mkdir gmkdir; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue
+ case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
+ 'mkdir (GNU coreutils) '* | \
+ 'mkdir (coreutils) '* | \
+ 'mkdir (fileutils) '4.1*)
+ ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext
+ break 3;;
+ esac
+ done
+ done
+ done
+IFS=$as_save_IFS
+
+fi
+
+ test -d ./--version && rmdir ./--version
+ if test "${ac_cv_path_mkdir+set}" = set; then
+ MKDIR_P="$ac_cv_path_mkdir -p"
+ else
+ # As a last resort, use the slow shell script. Don't cache a
+ # value for MKDIR_P within a source directory, because that will
+ # break other packages using the cache if that directory is
+ # removed, or if the value is a relative name.
+ MKDIR_P="$ac_install_sh -d"
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5
+$as_echo "$MKDIR_P" >&6; }
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
+set x ${MAKE-make}
+ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
+if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat >conftest.make <<\_ACEOF
+SHELL = /bin/sh
+all:
+ @echo '@@@%%%=$(MAKE)=@@@%%%'
+_ACEOF
+# GNU make sometimes prints "make[1]: Entering ...", which would confuse us.
+case `${MAKE-make} -f conftest.make 2>/dev/null` in
+ *@@@%%%=?*=@@@%%%*)
+ eval ac_cv_prog_make_${ac_make}_set=yes;;
+ *)
+ eval ac_cv_prog_make_${ac_make}_set=no;;
+esac
+rm -f conftest.make
+fi
+if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ SET_MAKE=
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ SET_MAKE="MAKE=${MAKE-make}"
+fi
+
+rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+ am__leading_dot=.
+else
+ am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+
+DEPDIR="${am__leading_dot}deps"
+
+ac_config_commands="$ac_config_commands depfiles"
+
+
+am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+ @echo this is the am__doit target
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5
+$as_echo_n "checking for style of include used by $am_make... " >&6; }
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# Ignore all kinds of additional output from 'make'.
+case `$am_make -s -f confmf 2> /dev/null` in #(
+*the\ am__doit\ target*)
+ am__include=include
+ am__quote=
+ _am_result=GNU
+ ;;
+esac
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+ echo '.include "confinc"' > confmf
+ case `$am_make -s -f confmf 2> /dev/null` in #(
+ *the\ am__doit\ target*)
+ am__include=.include
+ am__quote="\""
+ _am_result=BSD
+ ;;
+ esac
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5
+$as_echo "$_am_result" >&6; }
+rm -f confinc confmf
+
+# Check whether --enable-dependency-tracking was given.
+if test "${enable_dependency_tracking+set}" = set; then :
+ enableval=$enable_dependency_tracking;
+fi
+
+if test "x$enable_dependency_tracking" != xno; then
+ am_depcomp="$ac_aux_dir/depcomp"
+ AMDEPBACKSLASH='\'
+ am__nodep='_no'
+fi
+ if test "x$enable_dependency_tracking" != xno; then
+ AMDEP_TRUE=
+ AMDEP_FALSE='#'
+else
+ AMDEP_TRUE='#'
+ AMDEP_FALSE=
+fi
+
+
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+ # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+ # is not polluted with repeated "-I."
+ am__isrc=' -I$(srcdir)'
+ # test to see if srcdir already configured
+ if test -f $srcdir/config.status; then
+ as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5
+ fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+ if (cygpath --version) >/dev/null 2>/dev/null; then
+ CYGPATH_W='cygpath -w'
+ else
+ CYGPATH_W=echo
+ fi
+fi
+
+
+# Define the identity of the package.
+
+ PACKAGE=OpenBSM
+ VERSION=1.2-alpha4
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE "$PACKAGE"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define VERSION "$VERSION"
+_ACEOF
+
+# Some tools Automake needs.
+
+ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
+
+
+AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
+
+
+AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
+
+
+AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
+
+
+MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
+
+# For better backward compatibility. To be removed once Automake 1.9.x
+# dies out for good. For more background, see:
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
+mkdir_p='$(MKDIR_P)'
+
+# We need awk for the "check" target. The system "awk" is bad on
+# some platforms.
+# Always define AMTAR for backward compatibility. Yes, it's still used
+# in the wild :-( We should find a proper way to deprecate it ...
+AMTAR='$${TAR-tar}'
+
+am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'
+
+
+
+
+depcc="$CC" am_compiler_list=
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
+$as_echo_n "checking dependency style of $depcc... " >&6; }
+if ${am_cv_CC_dependencies_compiler_type+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+ # We make a subdir and do the tests there. Otherwise we can end up
+ # making bogus files that we don't know about and never remove. For
+ # instance it was reported that on HP-UX the gcc test will end up
+ # making a dummy file named 'D' -- because '-MD' means "put the output
+ # in D".
+ rm -rf conftest.dir
+ mkdir conftest.dir
+ # Copy depcomp to subdir because otherwise we won't find it if we're
+ # using a relative directory.
+ cp "$am_depcomp" conftest.dir
+ cd conftest.dir
+ # We will build objects and dependencies in a subdirectory because
+ # it helps to detect inapplicable dependency modes. For instance
+ # both Tru64's cc and ICC support -MD to output dependencies as a
+ # side effect of compilation, but ICC will put the dependencies in
+ # the current directory while Tru64 will put them in the object
+ # directory.
+ mkdir sub
+
+ am_cv_CC_dependencies_compiler_type=none
+ if test "$am_compiler_list" = ""; then
+ am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
+ fi
+ am__universal=false
+ case " $depcc " in #(
+ *\ -arch\ *\ -arch\ *) am__universal=true ;;
+ esac
+
+ for depmode in $am_compiler_list; do
+ # Setup a source with many dependencies, because some compilers
+ # like to wrap large dependency lists on column 80 (with \), and
+ # we should not choose a depcomp mode which is confused by this.
+ #
+ # We need to recreate these files for each test, as the compiler may
+ # overwrite some of them when testing with obscure command lines.
+ # This happens at least with the AIX C compiler.
+ : > sub/conftest.c
+ for i in 1 2 3 4 5 6; do
+ echo '#include "conftst'$i'.h"' >> sub/conftest.c
+ # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
+ # Solaris 10 /bin/sh.
+ echo '/* dummy */' > sub/conftst$i.h
+ done
+ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+ # We check with '-c' and '-o' for the sake of the "dashmstdout"
+ # mode. It turns out that the SunPro C++ compiler does not properly
+ # handle '-M -o', and we need to detect this. Also, some Intel
+ # versions had trouble with output in subdirs.
+ am__obj=sub/conftest.${OBJEXT-o}
+ am__minus_obj="-o $am__obj"
+ case $depmode in
+ gcc)
+ # This depmode causes a compiler race in universal mode.
+ test "$am__universal" = false || continue
+ ;;
+ nosideeffect)
+ # After this tag, mechanisms are not by side-effect, so they'll
+ # only be used when explicitly requested.
+ if test "x$enable_dependency_tracking" = xyes; then
+ continue
+ else
+ break
+ fi
+ ;;
+ msvc7 | msvc7msys | msvisualcpp | msvcmsys)
+ # This compiler won't grok '-c -o', but also, the minuso test has
+ # not run yet. These depmodes are late enough in the game, and
+ # so weak that their functioning should not be impacted.
+ am__obj=conftest.${OBJEXT-o}
+ am__minus_obj=
+ ;;
+ none) break ;;
+ esac
+ if depmode=$depmode \
+ source=sub/conftest.c object=$am__obj \
+ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+ >/dev/null 2>conftest.err &&
+ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+ # icc doesn't choke on unknown options, it will just issue warnings
+ # or remarks (even with -Werror). So we grep stderr for any message
+ # that says an option was ignored or not supported.
+ # When given -MP, icc 7.0 and 7.1 complain thusly:
+ # icc: Command line warning: ignoring option '-M'; no argument required
+ # The diagnosis changed in icc 8.0:
+ # icc: Command line remark: option '-MP' not supported
+ if (grep 'ignoring option' conftest.err ||
+ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+ am_cv_CC_dependencies_compiler_type=$depmode
+ break
+ fi
+ fi
+ done
+
+ cd ..
+ rm -rf conftest.dir
+else
+ am_cv_CC_dependencies_compiler_type=none
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5
+$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
+CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
+
+ if
+ test "x$enable_dependency_tracking" != xno \
+ && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
+ am__fastdepCC_TRUE=
+ am__fastdepCC_FALSE='#'
+else
+ am__fastdepCC_TRUE='#'
+ am__fastdepCC_FALSE=
+fi
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing dlsym" >&5
+$as_echo_n "checking for library containing dlsym... " >&6; }
+if ${ac_cv_search_dlsym+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_func_search_save_LIBS=$LIBS
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlsym ();
+int
+main ()
+{
+return dlsym ();
+ ;
+ return 0;
+}
+_ACEOF
+for ac_lib in '' dl; do
+ if test -z "$ac_lib"; then
+ ac_res="none required"
+ else
+ ac_res=-l$ac_lib
+ LIBS="-l$ac_lib $ac_func_search_save_LIBS"
+ fi
+ if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_search_dlsym=$ac_res
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext
+ if ${ac_cv_search_dlsym+:} false; then :
+ break
+fi
+done
+if ${ac_cv_search_dlsym+:} false; then :
+
+else
+ ac_cv_search_dlsym=no
+fi
+rm conftest.$ac_ext
+LIBS=$ac_func_search_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_dlsym" >&5
+$as_echo "$ac_cv_search_dlsym" >&6; }
+ac_res=$ac_cv_search_dlsym
+if test "$ac_res" != no; then :
+ test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing pthread_create" >&5
+$as_echo_n "checking for library containing pthread_create... " >&6; }
+if ${ac_cv_search_pthread_create+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_func_search_save_LIBS=$LIBS
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char pthread_create ();
+int
+main ()
+{
+return pthread_create ();
+ ;
+ return 0;
+}
+_ACEOF
+for ac_lib in '' pthread; do
+ if test -z "$ac_lib"; then
+ ac_res="none required"
+ else
+ ac_res=-l$ac_lib
+ LIBS="-l$ac_lib $ac_func_search_save_LIBS"
+ fi
+ if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_search_pthread_create=$ac_res
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext
+ if ${ac_cv_search_pthread_create+:} false; then :
+ break
+fi
+done
+if ${ac_cv_search_pthread_create+:} false; then :
+
+else
+ ac_cv_search_pthread_create=no
+fi
+rm conftest.$ac_ext
+LIBS=$ac_func_search_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_pthread_create" >&5
+$as_echo "$ac_cv_search_pthread_create" >&6; }
+ac_res=$ac_cv_search_pthread_create
+if test "$ac_res" != no; then :
+ test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing clock_gettime" >&5
+$as_echo_n "checking for library containing clock_gettime... " >&6; }
+if ${ac_cv_search_clock_gettime+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_func_search_save_LIBS=$LIBS
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char clock_gettime ();
+int
+main ()
+{
+return clock_gettime ();
+ ;
+ return 0;
+}
+_ACEOF
+for ac_lib in '' rt; do
+ if test -z "$ac_lib"; then
+ ac_res="none required"
+ else
+ ac_res=-l$ac_lib
+ LIBS="-l$ac_lib $ac_func_search_save_LIBS"
+ fi
+ if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_search_clock_gettime=$ac_res
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext
+ if ${ac_cv_search_clock_gettime+:} false; then :
+ break
+fi
+done
+if ${ac_cv_search_clock_gettime+:} false; then :
+
+else
+ ac_cv_search_clock_gettime=no
+fi
+rm conftest.$ac_ext
+LIBS=$ac_func_search_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_clock_gettime" >&5
+$as_echo "$ac_cv_search_clock_gettime" >&6; }
+ac_res=$ac_cv_search_clock_gettime
+if test "$ac_res" != no; then :
+ test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing SSL_connect" >&5
+$as_echo_n "checking for library containing SSL_connect... " >&6; }
+if ${ac_cv_search_SSL_connect+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_func_search_save_LIBS=$LIBS
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char SSL_connect ();
+int
+main ()
+{
+return SSL_connect ();
+ ;
+ return 0;
+}
+_ACEOF
+for ac_lib in '' ssl; do
+ if test -z "$ac_lib"; then
+ ac_res="none required"
+ else
+ ac_res=-l$ac_lib
+ LIBS="-l$ac_lib $ac_func_search_save_LIBS"
+ fi
+ if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_search_SSL_connect=$ac_res
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext
+ if ${ac_cv_search_SSL_connect+:} false; then :
+ break
+fi
+done
+if ${ac_cv_search_SSL_connect+:} false; then :
+
+else
+ ac_cv_search_SSL_connect=no
+fi
+rm conftest.$ac_ext
+LIBS=$ac_func_search_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_SSL_connect" >&5
+$as_echo "$ac_cv_search_SSL_connect" >&6; }
+ac_res=$ac_cv_search_SSL_connect
+if test "$ac_res" != no; then :
+ test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing humanize_number" >&5
+$as_echo_n "checking for library containing humanize_number... " >&6; }
+if ${ac_cv_search_humanize_number+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_func_search_save_LIBS=$LIBS
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char humanize_number ();
+int
+main ()
+{
+return humanize_number ();
+ ;
+ return 0;
+}
+_ACEOF
+for ac_lib in '' util; do
+ if test -z "$ac_lib"; then
+ ac_res="none required"
+ else
+ ac_res=-l$ac_lib
+ LIBS="-l$ac_lib $ac_func_search_save_LIBS"
+ fi
+ if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_search_humanize_number=$ac_res
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext
+ if ${ac_cv_search_humanize_number+:} false; then :
+ break
+fi
+done
+if ${ac_cv_search_humanize_number+:} false; then :
+
+else
+ ac_cv_search_humanize_number=no
+fi
+rm conftest.$ac_ext
+LIBS=$ac_func_search_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_humanize_number" >&5
+$as_echo "$ac_cv_search_humanize_number" >&6; }
+ac_res=$ac_cv_search_humanize_number
+if test "$ac_res" != no; then :
+ test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing pidfile_open" >&5
+$as_echo_n "checking for library containing pidfile_open... " >&6; }
+if ${ac_cv_search_pidfile_open+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_func_search_save_LIBS=$LIBS
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char pidfile_open ();
+int
+main ()
+{
+return pidfile_open ();
+ ;
+ return 0;
+}
+_ACEOF
+for ac_lib in '' util; do
+ if test -z "$ac_lib"; then
+ ac_res="none required"
+ else
+ ac_res=-l$ac_lib
+ LIBS="-l$ac_lib $ac_func_search_save_LIBS"
+ fi
+ if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_search_pidfile_open=$ac_res
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext
+ if ${ac_cv_search_pidfile_open+:} false; then :
+ break
+fi
+done
+if ${ac_cv_search_pidfile_open+:} false; then :
+
+else
+ ac_cv_search_pidfile_open=no
+fi
+rm conftest.$ac_ext
+LIBS=$ac_func_search_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_pidfile_open" >&5
+$as_echo "$ac_cv_search_pidfile_open" >&6; }
+ac_res=$ac_cv_search_pidfile_open
+if test "$ac_res" != no; then :
+ test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
+
+fi
+
+
+# Checks for header files.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
+$as_echo_n "checking for ANSI C header files... " >&6; }
+if ${ac_cv_header_stdc+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_header_stdc=yes
+else
+ ac_cv_header_stdc=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+if test $ac_cv_header_stdc = yes; then
+ # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <string.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "memchr" >/dev/null 2>&1; then :
+
+else
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <stdlib.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "free" >/dev/null 2>&1; then :
+
+else
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+ if test "$cross_compiling" = yes; then :
+ :
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <ctype.h>
+#include <stdlib.h>
+#if ((' ' & 0x0FF) == 0x020)
+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#else
+# define ISLOWER(c) \
+ (('a' <= (c) && (c) <= 'i') \
+ || ('j' <= (c) && (c) <= 'r') \
+ || ('s' <= (c) && (c) <= 'z'))
+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
+#endif
+
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int
+main ()
+{
+ int i;
+ for (i = 0; i < 256; i++)
+ if (XOR (islower (i), ISLOWER (i))
+ || toupper (i) != TOUPPER (i))
+ return 2;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+
+else
+ ac_cv_header_stdc=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+ conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5
+$as_echo "$ac_cv_header_stdc" >&6; }
+if test $ac_cv_header_stdc = yes; then
+
+$as_echo "#define STDC_HEADERS 1" >>confdefs.h
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sys/wait.h that is POSIX.1 compatible" >&5
+$as_echo_n "checking for sys/wait.h that is POSIX.1 compatible... " >&6; }
+if ${ac_cv_header_sys_wait_h+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <sys/types.h>
+#include <sys/wait.h>
+#ifndef WEXITSTATUS
+# define WEXITSTATUS(stat_val) ((unsigned int) (stat_val) >> 8)
+#endif
+#ifndef WIFEXITED
+# define WIFEXITED(stat_val) (((stat_val) & 255) == 0)
+#endif
+
+int
+main ()
+{
+ int s;
+ wait (&s);
+ s = WIFEXITED (s) ? WEXITSTATUS (s) : 1;
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_header_sys_wait_h=yes
+else
+ ac_cv_header_sys_wait_h=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_sys_wait_h" >&5
+$as_echo "$ac_cv_header_sys_wait_h" >&6; }
+if test $ac_cv_header_sys_wait_h = yes; then
+
+$as_echo "#define HAVE_SYS_WAIT_H 1" >>confdefs.h
+
+fi
+
+for ac_header in mach/mach.h stdint.h pthread_np.h printf.h
+do :
+ as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
+ cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+
+$as_echo "#define _GNU_SOURCE /**/" >>confdefs.h
+
+
+# Checks for typedefs, structures, and compiler characteristics.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for an ANSI C-conforming const" >&5
+$as_echo_n "checking for an ANSI C-conforming const... " >&6; }
+if ${ac_cv_c_const+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+#ifndef __cplusplus
+ /* Ultrix mips cc rejects this sort of thing. */
+ typedef int charset[2];
+ const charset cs = { 0, 0 };
+ /* SunOS 4.1.1 cc rejects this. */
+ char const *const *pcpcc;
+ char **ppc;
+ /* NEC SVR4.0.2 mips cc rejects this. */
+ struct point {int x, y;};
+ static struct point const zero = {0,0};
+ /* AIX XL C 1.02.0.0 rejects this.
+ It does not let you subtract one const X* pointer from another in
+ an arm of an if-expression whose if-part is not a constant
+ expression */
+ const char *g = "string";
+ pcpcc = &g + (g ? g-g : 0);
+ /* HPUX 7.0 cc rejects these. */
+ ++pcpcc;
+ ppc = (char**) pcpcc;
+ pcpcc = (char const *const *) ppc;
+ { /* SCO 3.2v4 cc rejects this sort of thing. */
+ char tx;
+ char *t = &tx;
+ char const *s = 0 ? (char *) 0 : (char const *) 0;
+
+ *t++ = 0;
+ if (s) return 0;
+ }
+ { /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */
+ int x[] = {25, 17};
+ const int *foo = &x[0];
+ ++foo;
+ }
+ { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */
+ typedef const int *iptr;
+ iptr p = 0;
+ ++p;
+ }
+ { /* AIX XL C 1.02.0.0 rejects this sort of thing, saying
+ "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */
+ struct s { int j; const int *ap[3]; } bx;
+ struct s *b = &bx; b->j = 5;
+ }
+ { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */
+ const int foo = 10;
+ if (!foo) return 0;
+ }
+ return !cs[0] && !zero.x;
+#endif
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_c_const=yes
+else
+ ac_cv_c_const=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_const" >&5
+$as_echo "$ac_cv_c_const" >&6; }
+if test $ac_cv_c_const = no; then
+
+$as_echo "#define const /**/" >>confdefs.h
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for uid_t in sys/types.h" >&5
+$as_echo_n "checking for uid_t in sys/types.h... " >&6; }
+if ${ac_cv_type_uid_t+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <sys/types.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "uid_t" >/dev/null 2>&1; then :
+ ac_cv_type_uid_t=yes
+else
+ ac_cv_type_uid_t=no
+fi
+rm -f conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_type_uid_t" >&5
+$as_echo "$ac_cv_type_uid_t" >&6; }
+if test $ac_cv_type_uid_t = no; then
+
+$as_echo "#define uid_t int" >>confdefs.h
+
+
+$as_echo "#define gid_t int" >>confdefs.h
+
+fi
+
+ac_fn_c_check_type "$LINENO" "pid_t" "ac_cv_type_pid_t" "$ac_includes_default"
+if test "x$ac_cv_type_pid_t" = xyes; then :
+
+else
+
+cat >>confdefs.h <<_ACEOF
+#define pid_t int
+_ACEOF
+
+fi
+
+ac_fn_c_check_type "$LINENO" "size_t" "ac_cv_type_size_t" "$ac_includes_default"
+if test "x$ac_cv_type_size_t" = xyes; then :
+
+else
+
+cat >>confdefs.h <<_ACEOF
+#define size_t unsigned int
+_ACEOF
+
+fi
+
+ac_fn_c_check_member "$LINENO" "struct stat" "st_rdev" "ac_cv_member_struct_stat_st_rdev" "$ac_includes_default"
+if test "x$ac_cv_member_struct_stat_st_rdev" = xyes; then :
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_STRUCT_STAT_ST_RDEV 1
+_ACEOF
+
+
+fi
+
+
+ac_fn_c_check_member "$LINENO" "struct ipc_perm" "__key" "ac_cv_member_struct_ipc_perm___key" "
+#include <sys/types.h>
+#include <sys/ipc.h>
+
+"
+if test "x$ac_cv_member_struct_ipc_perm___key" = xyes; then :
+
+$as_echo "#define HAVE_IPC_PERM___KEY /**/" >>confdefs.h
+
+fi
+
+
+ac_fn_c_check_member "$LINENO" "struct ipc_perm" "_key" "ac_cv_member_struct_ipc_perm__key" "
+#include <sys/types.h>
+#include <sys/ipc.h>
+
+"
+if test "x$ac_cv_member_struct_ipc_perm__key" = xyes; then :
+
+$as_echo "#define HAVE_IPC_PERM__KEY /**/" >>confdefs.h
+
+fi
+
+
+ac_fn_c_check_member "$LINENO" "struct ipc_perm" "__seq" "ac_cv_member_struct_ipc_perm___seq" "
+#include <sys/types.h>
+#include <sys/ipc.h>
+
+"
+if test "x$ac_cv_member_struct_ipc_perm___seq" = xyes; then :
+
+$as_echo "#define HAVE_IPC_PERM___SEQ /**/" >>confdefs.h
+
+fi
+
+
+ac_fn_c_check_member "$LINENO" "struct ipc_perm" "_seq" "ac_cv_member_struct_ipc_perm__seq" "
+#include <sys/types.h>
+#include <sys/ipc.h>
+
+"
+if test "x$ac_cv_member_struct_ipc_perm__seq" = xyes; then :
+
+$as_echo "#define HAVE_IPC_PERM__SEQ /**/" >>confdefs.h
+
+fi
+
+
+ac_fn_c_check_member "$LINENO" "struct sockaddr_storage" "ss_len" "ac_cv_member_struct_sockaddr_storage_ss_len" "
+#include <sys/types.h>
+#include <sys/socket.h>
+
+"
+if test "x$ac_cv_member_struct_sockaddr_storage_ss_len" = xyes; then :
+
+$as_echo "#define HAVE_SOCKADDR_STORAGE_SS_LEN /**/" >>confdefs.h
+
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether time.h and sys/time.h may both be included" >&5
+$as_echo_n "checking whether time.h and sys/time.h may both be included... " >&6; }
+if ${ac_cv_header_time+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <sys/types.h>
+#include <sys/time.h>
+#include <time.h>
+
+int
+main ()
+{
+if ((struct tm *) 0)
+return 0;
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_header_time=yes
+else
+ ac_cv_header_time=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_time" >&5
+$as_echo "$ac_cv_header_time" >&6; }
+if test $ac_cv_header_time = yes; then
+
+$as_echo "#define TIME_WITH_SYS_TIME 1" >>confdefs.h
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether struct tm is in sys/time.h or time.h" >&5
+$as_echo_n "checking whether struct tm is in sys/time.h or time.h... " >&6; }
+if ${ac_cv_struct_tm+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <sys/types.h>
+#include <time.h>
+
+int
+main ()
+{
+struct tm tm;
+ int *p = &tm.tm_sec;
+ return !p;
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_struct_tm=time.h
+else
+ ac_cv_struct_tm=sys/time.h
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_struct_tm" >&5
+$as_echo "$ac_cv_struct_tm" >&6; }
+if test $ac_cv_struct_tm = sys/time.h; then
+
+$as_echo "#define TM_IN_SYS_TIME 1" >>confdefs.h
+
+fi
+
+
+# Checks for library functions.
+for ac_header in unistd.h
+do :
+ ac_fn_c_check_header_mongrel "$LINENO" "unistd.h" "ac_cv_header_unistd_h" "$ac_includes_default"
+if test "x$ac_cv_header_unistd_h" = xyes; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_UNISTD_H 1
+_ACEOF
+
+fi
+
+done
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for working chown" >&5
+$as_echo_n "checking for working chown... " >&6; }
+if ${ac_cv_func_chown_works+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test "$cross_compiling" = yes; then :
+ ac_cv_func_chown_works=no
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$ac_includes_default
+#include <fcntl.h>
+
+int
+main ()
+{
+ char *f = "conftest.chown";
+ struct stat before, after;
+
+ if (creat (f, 0600) < 0)
+ return 1;
+ if (stat (f, &before) < 0)
+ return 1;
+ if (chown (f, (uid_t) -1, (gid_t) -1) == -1)
+ return 1;
+ if (stat (f, &after) < 0)
+ return 1;
+ return ! (before.st_uid == after.st_uid && before.st_gid == after.st_gid);
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+ ac_cv_func_chown_works=yes
+else
+ ac_cv_func_chown_works=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+ conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+rm -f conftest.chown
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_chown_works" >&5
+$as_echo "$ac_cv_func_chown_works" >&6; }
+if test $ac_cv_func_chown_works = yes; then
+
+$as_echo "#define HAVE_CHOWN 1" >>confdefs.h
+
+fi
+
+for ac_header in vfork.h
+do :
+ ac_fn_c_check_header_mongrel "$LINENO" "vfork.h" "ac_cv_header_vfork_h" "$ac_includes_default"
+if test "x$ac_cv_header_vfork_h" = xyes; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_VFORK_H 1
+_ACEOF
+
+fi
+
+done
+
+for ac_func in fork vfork
+do :
+ as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
+ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
+if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
+ cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+done
+
+if test "x$ac_cv_func_fork" = xyes; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for working fork" >&5
+$as_echo_n "checking for working fork... " >&6; }
+if ${ac_cv_func_fork_works+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test "$cross_compiling" = yes; then :
+ ac_cv_func_fork_works=cross
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+
+ /* By Ruediger Kuhlmann. */
+ return fork () < 0;
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+ ac_cv_func_fork_works=yes
+else
+ ac_cv_func_fork_works=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+ conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_fork_works" >&5
+$as_echo "$ac_cv_func_fork_works" >&6; }
+
+else
+ ac_cv_func_fork_works=$ac_cv_func_fork
+fi
+if test "x$ac_cv_func_fork_works" = xcross; then
+ case $host in
+ *-*-amigaos* | *-*-msdosdjgpp*)
+ # Override, as these systems have only a dummy fork() stub
+ ac_cv_func_fork_works=no
+ ;;
+ *)
+ ac_cv_func_fork_works=yes
+ ;;
+ esac
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: result $ac_cv_func_fork_works guessed because of cross compilation" >&5
+$as_echo "$as_me: WARNING: result $ac_cv_func_fork_works guessed because of cross compilation" >&2;}
+fi
+ac_cv_func_vfork_works=$ac_cv_func_vfork
+if test "x$ac_cv_func_vfork" = xyes; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for working vfork" >&5
+$as_echo_n "checking for working vfork... " >&6; }
+if ${ac_cv_func_vfork_works+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test "$cross_compiling" = yes; then :
+ ac_cv_func_vfork_works=cross
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+/* Thanks to Paul Eggert for this test. */
+$ac_includes_default
+#include <sys/wait.h>
+#ifdef HAVE_VFORK_H
+# include <vfork.h>
+#endif
+/* On some sparc systems, changes by the child to local and incoming
+ argument registers are propagated back to the parent. The compiler
+ is told about this with #include <vfork.h>, but some compilers
+ (e.g. gcc -O) don't grok <vfork.h>. Test for this by using a
+ static variable whose address is put into a register that is
+ clobbered by the vfork. */
+static void
+#ifdef __cplusplus
+sparc_address_test (int arg)
+# else
+sparc_address_test (arg) int arg;
+#endif
+{
+ static pid_t child;
+ if (!child) {
+ child = vfork ();
+ if (child < 0) {
+ perror ("vfork");
+ _exit(2);
+ }
+ if (!child) {
+ arg = getpid();
+ write(-1, "", 0);
+ _exit (arg);
+ }
+ }
+}
+
+int
+main ()
+{
+ pid_t parent = getpid ();
+ pid_t child;
+
+ sparc_address_test (0);
+
+ child = vfork ();
+
+ if (child == 0) {
+ /* Here is another test for sparc vfork register problems. This
+ test uses lots of local variables, at least as many local
+ variables as main has allocated so far including compiler
+ temporaries. 4 locals are enough for gcc 1.40.3 on a Solaris
+ 4.1.3 sparc, but we use 8 to be safe. A buggy compiler should
+ reuse the register of parent for one of the local variables,
+ since it will think that parent can't possibly be used any more
+ in this routine. Assigning to the local variable will thus
+ munge parent in the parent process. */
+ pid_t
+ p = getpid(), p1 = getpid(), p2 = getpid(), p3 = getpid(),
+ p4 = getpid(), p5 = getpid(), p6 = getpid(), p7 = getpid();
+ /* Convince the compiler that p..p7 are live; otherwise, it might
+ use the same hardware register for all 8 local variables. */
+ if (p != p1 || p != p2 || p != p3 || p != p4
+ || p != p5 || p != p6 || p != p7)
+ _exit(1);
+
+ /* On some systems (e.g. IRIX 3.3), vfork doesn't separate parent
+ from child file descriptors. If the child closes a descriptor
+ before it execs or exits, this munges the parent's descriptor
+ as well. Test for this by closing stdout in the child. */
+ _exit(close(fileno(stdout)) != 0);
+ } else {
+ int status;
+ struct stat st;
+
+ while (wait(&status) != child)
+ ;
+ return (
+ /* Was there some problem with vforking? */
+ child < 0
+
+ /* Did the child fail? (This shouldn't happen.) */
+ || status
+
+ /* Did the vfork/compiler bug occur? */
+ || parent != getpid()
+
+ /* Did the file descriptor bug occur? */
+ || fstat(fileno(stdout), &st) != 0
+ );
+ }
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+ ac_cv_func_vfork_works=yes
+else
+ ac_cv_func_vfork_works=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+ conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_vfork_works" >&5
+$as_echo "$ac_cv_func_vfork_works" >&6; }
+
+fi;
+if test "x$ac_cv_func_fork_works" = xcross; then
+ ac_cv_func_vfork_works=$ac_cv_func_vfork
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: result $ac_cv_func_vfork_works guessed because of cross compilation" >&5
+$as_echo "$as_me: WARNING: result $ac_cv_func_vfork_works guessed because of cross compilation" >&2;}
+fi
+
+if test "x$ac_cv_func_vfork_works" = xyes; then
+
+$as_echo "#define HAVE_WORKING_VFORK 1" >>confdefs.h
+
+else
+
+$as_echo "#define vfork fork" >>confdefs.h
+
+fi
+if test "x$ac_cv_func_fork_works" = xyes; then
+
+$as_echo "#define HAVE_WORKING_FORK 1" >>confdefs.h
+
+fi
+
+for ac_header in stdlib.h
+do :
+ ac_fn_c_check_header_mongrel "$LINENO" "stdlib.h" "ac_cv_header_stdlib_h" "$ac_includes_default"
+if test "x$ac_cv_header_stdlib_h" = xyes; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_STDLIB_H 1
+_ACEOF
+
+fi
+
+done
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU libc compatible malloc" >&5
+$as_echo_n "checking for GNU libc compatible malloc... " >&6; }
+if ${ac_cv_func_malloc_0_nonnull+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test "$cross_compiling" = yes; then :
+ ac_cv_func_malloc_0_nonnull=no
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#if defined STDC_HEADERS || defined HAVE_STDLIB_H
+# include <stdlib.h>
+#else
+char *malloc ();
+#endif
+
+int
+main ()
+{
+return ! malloc (0);
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+ ac_cv_func_malloc_0_nonnull=yes
+else
+ ac_cv_func_malloc_0_nonnull=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+ conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_malloc_0_nonnull" >&5
+$as_echo "$ac_cv_func_malloc_0_nonnull" >&6; }
+if test $ac_cv_func_malloc_0_nonnull = yes; then :
+
+$as_echo "#define HAVE_MALLOC 1" >>confdefs.h
+
+else
+ $as_echo "#define HAVE_MALLOC 0" >>confdefs.h
+
+ case " $LIBOBJS " in
+ *" malloc.$ac_objext "* ) ;;
+ *) LIBOBJS="$LIBOBJS malloc.$ac_objext"
+ ;;
+esac
+
+
+$as_echo "#define malloc rpl_malloc" >>confdefs.h
+
+fi
+
+
+
+
+
+ for ac_header in $ac_header_list
+do :
+ as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
+"
+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
+ cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+
+
+
+
+
+
+ for ac_func in $ac_func_list
+do :
+ as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
+ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
+if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
+ cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+done
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for working mktime" >&5
+$as_echo_n "checking for working mktime... " >&6; }
+if ${ac_cv_func_working_mktime+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test "$cross_compiling" = yes; then :
+ ac_cv_func_working_mktime=no
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+/* Test program from Paul Eggert and Tony Leneis. */
+#ifdef TIME_WITH_SYS_TIME
+# include <sys/time.h>
+# include <time.h>
+#else
+# ifdef HAVE_SYS_TIME_H
+# include <sys/time.h>
+# else
+# include <time.h>
+# endif
+#endif
+
+#include <limits.h>
+#include <stdlib.h>
+
+#ifdef HAVE_UNISTD_H
+# include <unistd.h>
+#endif
+
+#ifndef HAVE_ALARM
+# define alarm(X) /* empty */
+#endif
+
+/* Work around redefinition to rpl_putenv by other config tests. */
+#undef putenv
+
+static time_t time_t_max;
+static time_t time_t_min;
+
+/* Values we'll use to set the TZ environment variable. */
+static const char *tz_strings[] = {
+ (const char *) 0, "TZ=GMT0", "TZ=JST-9",
+ "TZ=EST+3EDT+2,M10.1.0/00:00:00,M2.3.0/00:00:00"
+};
+#define N_STRINGS (sizeof (tz_strings) / sizeof (tz_strings[0]))
+
+/* Return 0 if mktime fails to convert a date in the spring-forward gap.
+ Based on a problem report from Andreas Jaeger. */
+static int
+spring_forward_gap ()
+{
+ /* glibc (up to about 1998-10-07) failed this test. */
+ struct tm tm;
+
+ /* Use the portable POSIX.1 specification "TZ=PST8PDT,M4.1.0,M10.5.0"
+ instead of "TZ=America/Vancouver" in order to detect the bug even
+ on systems that don't support the Olson extension, or don't have the
+ full zoneinfo tables installed. */
+ putenv ((char*) "TZ=PST8PDT,M4.1.0,M10.5.0");
+
+ tm.tm_year = 98;
+ tm.tm_mon = 3;
+ tm.tm_mday = 5;
+ tm.tm_hour = 2;
+ tm.tm_min = 0;
+ tm.tm_sec = 0;
+ tm.tm_isdst = -1;
+ return mktime (&tm) != (time_t) -1;
+}
+
+static int
+mktime_test1 (time_t now)
+{
+ struct tm *lt;
+ return ! (lt = localtime (&now)) || mktime (lt) == now;
+}
+
+static int
+mktime_test (time_t now)
+{
+ return (mktime_test1 (now)
+ && mktime_test1 ((time_t) (time_t_max - now))
+ && mktime_test1 ((time_t) (time_t_min + now)));
+}
+
+static int
+irix_6_4_bug ()
+{
+ /* Based on code from Ariel Faigon. */
+ struct tm tm;
+ tm.tm_year = 96;
+ tm.tm_mon = 3;
+ tm.tm_mday = 0;
+ tm.tm_hour = 0;
+ tm.tm_min = 0;
+ tm.tm_sec = 0;
+ tm.tm_isdst = -1;
+ mktime (&tm);
+ return tm.tm_mon == 2 && tm.tm_mday == 31;
+}
+
+static int
+bigtime_test (int j)
+{
+ struct tm tm;
+ time_t now;
+ tm.tm_year = tm.tm_mon = tm.tm_mday = tm.tm_hour = tm.tm_min = tm.tm_sec = j;
+ now = mktime (&tm);
+ if (now != (time_t) -1)
+ {
+ struct tm *lt = localtime (&now);
+ if (! (lt
+ && lt->tm_year == tm.tm_year
+ && lt->tm_mon == tm.tm_mon
+ && lt->tm_mday == tm.tm_mday
+ && lt->tm_hour == tm.tm_hour
+ && lt->tm_min == tm.tm_min
+ && lt->tm_sec == tm.tm_sec
+ && lt->tm_yday == tm.tm_yday
+ && lt->tm_wday == tm.tm_wday
+ && ((lt->tm_isdst < 0 ? -1 : 0 < lt->tm_isdst)
+ == (tm.tm_isdst < 0 ? -1 : 0 < tm.tm_isdst))))
+ return 0;
+ }
+ return 1;
+}
+
+static int
+year_2050_test ()
+{
+ /* The correct answer for 2050-02-01 00:00:00 in Pacific time,
+ ignoring leap seconds. */
+ unsigned long int answer = 2527315200UL;
+
+ struct tm tm;
+ time_t t;
+ tm.tm_year = 2050 - 1900;
+ tm.tm_mon = 2 - 1;
+ tm.tm_mday = 1;
+ tm.tm_hour = tm.tm_min = tm.tm_sec = 0;
+ tm.tm_isdst = -1;
+
+ /* Use the portable POSIX.1 specification "TZ=PST8PDT,M4.1.0,M10.5.0"
+ instead of "TZ=America/Vancouver" in order to detect the bug even
+ on systems that don't support the Olson extension, or don't have the
+ full zoneinfo tables installed. */
+ putenv ((char*) "TZ=PST8PDT,M4.1.0,M10.5.0");
+
+ t = mktime (&tm);
+
+ /* Check that the result is either a failure, or close enough
+ to the correct answer that we can assume the discrepancy is
+ due to leap seconds. */
+ return (t == (time_t) -1
+ || (0 < t && answer - 120 <= t && t <= answer + 120));
+}
+
+int
+main ()
+{
+ time_t t, delta;
+ int i, j;
+
+ /* This test makes some buggy mktime implementations loop.
+ Give up after 60 seconds; a mktime slower than that
+ isn't worth using anyway. */
+ alarm (60);
+
+ for (;;)
+ {
+ t = (time_t_max << 1) + 1;
+ if (t <= time_t_max)
+ break;
+ time_t_max = t;
+ }
+ time_t_min = - ((time_t) ~ (time_t) 0 == (time_t) -1) - time_t_max;
+
+ delta = time_t_max / 997; /* a suitable prime number */
+ for (i = 0; i < N_STRINGS; i++)
+ {
+ if (tz_strings[i])
+ putenv ((char*) tz_strings[i]);
+
+ for (t = 0; t <= time_t_max - delta; t += delta)
+ if (! mktime_test (t))
+ return 1;
+ if (! (mktime_test ((time_t) 1)
+ && mktime_test ((time_t) (60 * 60))
+ && mktime_test ((time_t) (60 * 60 * 24))))
+ return 1;
+
+ for (j = 1; ; j <<= 1)
+ if (! bigtime_test (j))
+ return 1;
+ else if (INT_MAX / 2 < j)
+ break;
+ if (! bigtime_test (INT_MAX))
+ return 1;
+ }
+ return ! (irix_6_4_bug () && spring_forward_gap () && year_2050_test ());
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+ ac_cv_func_working_mktime=yes
+else
+ ac_cv_func_working_mktime=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+ conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_working_mktime" >&5
+$as_echo "$ac_cv_func_working_mktime" >&6; }
+if test $ac_cv_func_working_mktime = no; then
+ case " $LIBOBJS " in
+ *" mktime.$ac_objext "* ) ;;
+ *) LIBOBJS="$LIBOBJS mktime.$ac_objext"
+ ;;
+esac
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking return type of signal handlers" >&5
+$as_echo_n "checking return type of signal handlers... " >&6; }
+if ${ac_cv_type_signal+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <sys/types.h>
+#include <signal.h>
+
+int
+main ()
+{
+return *(signal (0, 0)) (0) == 1;
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_type_signal=int
+else
+ ac_cv_type_signal=void
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_type_signal" >&5
+$as_echo "$ac_cv_type_signal" >&6; }
+
+cat >>confdefs.h <<_ACEOF
+#define RETSIGTYPE $ac_cv_type_signal
+_ACEOF
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether lstat correctly handles trailing slash" >&5
+$as_echo_n "checking whether lstat correctly handles trailing slash... " >&6; }
+if ${ac_cv_func_lstat_dereferences_slashed_symlink+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ rm -f conftest.sym conftest.file
+echo >conftest.file
+if test "$as_ln_s" = "ln -s" && ln -s conftest.file conftest.sym; then
+ if test "$cross_compiling" = yes; then :
+ ac_cv_func_lstat_dereferences_slashed_symlink=no
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+struct stat sbuf;
+ /* Linux will dereference the symlink and fail, as required by POSIX.
+ That is better in the sense that it means we will not
+ have to compile and use the lstat wrapper. */
+ return lstat ("conftest.sym/", &sbuf) == 0;
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+ ac_cv_func_lstat_dereferences_slashed_symlink=yes
+else
+ ac_cv_func_lstat_dereferences_slashed_symlink=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+ conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+else
+ # If the `ln -s' command failed, then we probably don't even
+ # have an lstat function.
+ ac_cv_func_lstat_dereferences_slashed_symlink=no
+fi
+rm -f conftest.sym conftest.file
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_lstat_dereferences_slashed_symlink" >&5
+$as_echo "$ac_cv_func_lstat_dereferences_slashed_symlink" >&6; }
+
+test $ac_cv_func_lstat_dereferences_slashed_symlink = yes &&
+
+cat >>confdefs.h <<_ACEOF
+#define LSTAT_FOLLOWS_SLASHED_SYMLINK 1
+_ACEOF
+
+
+if test "x$ac_cv_func_lstat_dereferences_slashed_symlink" = xno; then
+ case " $LIBOBJS " in
+ *" lstat.$ac_objext "* ) ;;
+ *) LIBOBJS="$LIBOBJS lstat.$ac_objext"
+ ;;
+esac
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stat accepts an empty string" >&5
+$as_echo_n "checking whether stat accepts an empty string... " >&6; }
+if ${ac_cv_func_stat_empty_string_bug+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test "$cross_compiling" = yes; then :
+ ac_cv_func_stat_empty_string_bug=yes
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+struct stat sbuf;
+ return stat ("", &sbuf) == 0;
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+ ac_cv_func_stat_empty_string_bug=no
+else
+ ac_cv_func_stat_empty_string_bug=yes
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+ conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_stat_empty_string_bug" >&5
+$as_echo "$ac_cv_func_stat_empty_string_bug" >&6; }
+if test $ac_cv_func_stat_empty_string_bug = yes; then
+ case " $LIBOBJS " in
+ *" stat.$ac_objext "* ) ;;
+ *) LIBOBJS="$LIBOBJS stat.$ac_objext"
+ ;;
+esac
+
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_STAT_EMPTY_STRING_BUG 1
+_ACEOF
+
+fi
+
+for ac_func in strftime
+do :
+ ac_fn_c_check_func "$LINENO" "strftime" "ac_cv_func_strftime"
+if test "x$ac_cv_func_strftime" = xyes; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_STRFTIME 1
+_ACEOF
+
+else
+ # strftime is in -lintl on SCO UNIX.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for strftime in -lintl" >&5
+$as_echo_n "checking for strftime in -lintl... " >&6; }
+if ${ac_cv_lib_intl_strftime+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lintl $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char strftime ();
+int
+main ()
+{
+return strftime ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_intl_strftime=yes
+else
+ ac_cv_lib_intl_strftime=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_intl_strftime" >&5
+$as_echo "$ac_cv_lib_intl_strftime" >&6; }
+if test "x$ac_cv_lib_intl_strftime" = xyes; then :
+ $as_echo "#define HAVE_STRFTIME 1" >>confdefs.h
+
+LIBS="-lintl $LIBS"
+fi
+
+fi
+done
+
+for ac_func in arc4random arc4random_buf bzero cap_enter clock_gettime closefrom faccessat fdopendir fstatat ftruncate getresgid getresuid gettimeofday inet_ntoa jail kqueue memset openat pthread_cond_timedwait_relative_np pthread_condattr_setclock pthread_mutex_lock renameat setproctitle sigtimedwait strchr strerror strlcat strlcpy strndup strrchr strstr strtol strtoul unlinkat vis
+do :
+ as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
+ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
+if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
+ cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+done
+
+
+# sys/queue.h exists on most systems, but its capabilities vary a great deal.
+# test for LIST_FIRST and TAILQ_FOREACH_SAFE, which appears to not exist in
+# all of them, and are necessary for OpenBSM.
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+ #include <sys/queue.h>
+
+int
+main ()
+{
+
+
+ #ifndef LIST_FIRST
+ #error LIST_FIRST missing
+ #endif
+ #ifndef TAILQ_FOREACH_SAFE
+ #error TAILQ_FOREACH_SAFE
+ #endif
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+
+$as_echo "#define HAVE_FULL_QUEUE_H /**/" >>confdefs.h
+
+
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+
+# Systems may not define key audit system calls, in which case libbsm cannot
+# depend on them or it will generate link-time or run-time errors. Test for
+# just one.
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+ #include <stddef.h>
+
+ extern int auditon(int, void *, int);
+
+int
+main ()
+{
+
+ int err;
+
+ err = auditon(0, NULL, 0);
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+
+$as_echo "#define HAVE_AUDIT_SYSCALLS /**/" >>confdefs.h
+
+have_audit_syscalls=true
+
+else
+
+have_audit_syscalls=false
+
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ if $have_audit_syscalls; then
+ HAVE_AUDIT_SYSCALLS_TRUE=
+ HAVE_AUDIT_SYSCALLS_FALSE='#'
+else
+ HAVE_AUDIT_SYSCALLS_TRUE='#'
+ HAVE_AUDIT_SYSCALLS_FALSE=
+fi
+
+
+#
+# We rely on the BSD be32toh() and be32enc()-style endian macros to perform
+# byte order conversions. Availability of these varies considerably -- in
+# general, a system might have neither, be32toh(), or be32toh() and be32enc().
+# There is also variation in which headers are even present, and whether they
+# are macros or functions. Try to organise the world into some simpler cases.
+# The following macros may be set at the end:
+#
+# USE_ENDIAN_H
+# USE_SYS_ENDIAN_H
+# USE_MACHINE_ENDIAN_H
+# USE_COMPAT_ENDIAN_H
+# USE_COMPAT_ENDIAN_ENC_H
+#
+# First, decide which system endian.h to use.
+#
+for ac_header in endian.h
+do :
+ ac_fn_c_check_header_mongrel "$LINENO" "endian.h" "ac_cv_header_endian_h" "$ac_includes_default"
+if test "x$ac_cv_header_endian_h" = xyes; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_ENDIAN_H 1
+_ACEOF
+
+ have_endian_h=yes
+
+else
+
+ have_endian_h=no
+
+fi
+
+done
+
+
+for ac_header in sys/endian.h
+do :
+ ac_fn_c_check_header_mongrel "$LINENO" "sys/endian.h" "ac_cv_header_sys_endian_h" "$ac_includes_default"
+if test "x$ac_cv_header_sys_endian_h" = xyes; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_SYS_ENDIAN_H 1
+_ACEOF
+
+ have_sys_endian_h=yes
+
+else
+
+ have_sys_endian_h=no
+
+fi
+
+done
+
+
+for ac_header in machine/endian.h
+do :
+ ac_fn_c_check_header_mongrel "$LINENO" "machine/endian.h" "ac_cv_header_machine_endian_h" "$ac_includes_default"
+if test "x$ac_cv_header_machine_endian_h" = xyes; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_MACHINE_ENDIAN_H 1
+_ACEOF
+
+ have_machine_endian_h=yes
+
+else
+
+ have_machine_endian_h=no
+
+fi
+
+done
+
+
+if test $have_endian_h = yes; then
+
+$as_echo "#define USE_ENDIAN_H /**/" >>confdefs.h
+
+elif test $have_sys_endian_h = yes; then
+
+$as_echo "#define USE_SYS_ENDIAN_H /**/" >>confdefs.h
+
+elif test $have_machine_endian_h = yes; then
+
+$as_echo "#define USE_MACHINE_ENDIAN_H /**/" >>confdefs.h
+
+else
+ as_fn_error $? "no endian.h" "$LINENO" 5
+fi
+
+#
+# Next, decide if we need to supplement with compat headers.
+#
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+ #ifdef USE_ENDIAN_H
+ #include <endian.h>
+ #endif
+ #ifdef USE_SYS_ENDIAN_H
+ #include <sys/endian.h>
+ #endif
+ #ifdef USE_MACHINE_ENDIAN_H
+ #include <machine/endian.h>
+ #endif
+
+int
+main ()
+{
+
+ (void)be32toh(0);
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+else
+
+
+$as_echo "#define USE_COMPAT_ENDIAN_H /**/" >>confdefs.h
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: using compat/endian.h" >&5
+$as_echo "using compat/endian.h" >&6; }
+
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+ #ifdef USE_ENDIAN_H
+ #include <endian.h>
+ #endif
+ #ifdef USE_SYS_ENDIAN_H
+ #include <sys/endian.h>
+ #endif
+ #ifdef USE_MACHINE_ENDIAN_H
+ #include <machine/endian.h>
+ #endif
+ #ifdef USE_COMPAT_ENDIAN_H
+ #include "compat/endian.h"
+ #endif
+ #include <stdlib.h>
+
+int
+main ()
+{
+
+ int i;
+
+ i = bswap16(0);
+ i = bswap32(0);
+ i = bswap64(0);
+ be32enc(NULL, 0);
+ i = htole64(0);
+ i = le64toh(0);
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+else
+
+
+$as_echo "#define USE_COMPAT_ENDIAN_ENC_H /**/" >>confdefs.h
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: using compat/endian_enc.h" >&5
+$as_echo "using compat/endian_enc.h" >&6; }
+
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+
+# Check to see if Mach IPC is used for trigger messages. If so, use Mach IPC
+# instead of the default for sending trigger messages to the audit components.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for /usr/include/mach/audit_triggers.defs" >&5
+$as_echo_n "checking for /usr/include/mach/audit_triggers.defs... " >&6; }
+if ${ac_cv_file__usr_include_mach_audit_triggers_defs+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ test "$cross_compiling" = yes &&
+ as_fn_error $? "cannot check for file existence when cross compiling" "$LINENO" 5
+if test -r "/usr/include/mach/audit_triggers.defs"; then
+ ac_cv_file__usr_include_mach_audit_triggers_defs=yes
+else
+ ac_cv_file__usr_include_mach_audit_triggers_defs=no
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_file__usr_include_mach_audit_triggers_defs" >&5
+$as_echo "$ac_cv_file__usr_include_mach_audit_triggers_defs" >&6; }
+if test "x$ac_cv_file__usr_include_mach_audit_triggers_defs" = xyes; then :
+
+
+$as_echo "#define USE_MACH_IPC /**/" >>confdefs.h
+
+use_mach_ipc=true
+
+else
+
+use_mach_ipc=false
+
+fi
+
+ if $use_mach_ipc; then
+ USE_MACH_IPC_TRUE=
+ USE_MACH_IPC_FALSE='#'
+else
+ USE_MACH_IPC_TRUE='#'
+ USE_MACH_IPC_FALSE=
+fi
+
+
+ac_config_files="$ac_config_files Makefile bin/Makefile bin/audit/Makefile bin/auditd/Makefile bin/auditdistd/Makefile bin/auditfilterd/Makefile bin/auditreduce/Makefile bin/praudit/Makefile bsm/Makefile libauditd/Makefile libbsm/Makefile modules/Makefile modules/auditfilter_noop/Makefile man/Makefile sys/Makefile sys/bsm/Makefile test/Makefile test/bsm/Makefile tools/Makefile"
+
+
+cat >confcache <<\_ACEOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs, see configure's option --config-cache.
+# It is not useful on other systems. If it contains results you don't
+# want to keep, you may remove or edit it.
+#
+# config.status only pays attention to the cache file if you give it
+# the --recheck option to rerun configure.
+#
+# `ac_cv_env_foo' variables (set or unset) will be overridden when
+# loading this file, other *unset* `ac_cv_foo' will be assigned the
+# following values.
+
+_ACEOF
+
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, we kill variables containing newlines.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(
+ for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
+ eval ac_val=\$$ac_var
+ case $ac_val in #(
+ *${as_nl}*)
+ case $ac_var in #(
+ *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+ esac
+ case $ac_var in #(
+ _ | IFS | as_nl) ;; #(
+ BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+ *) { eval $ac_var=; unset $ac_var;} ;;
+ esac ;;
+ esac
+ done
+
+ (set) 2>&1 |
+ case $as_nl`(ac_space=' '; set) 2>&1` in #(
+ *${as_nl}ac_space=\ *)
+ # `set' does not quote correctly, so add quotes: double-quote
+ # substitution turns \\\\ into \\, and sed turns \\ into \.
+ sed -n \
+ "s/'/'\\\\''/g;
+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
+ ;; #(
+ *)
+ # `set' quotes correctly as required by POSIX, so do not add quotes.
+ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+ ;;
+ esac |
+ sort
+) |
+ sed '
+ /^ac_cv_env_/b end
+ t clear
+ :clear
+ s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
+ t end
+ s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+ :end' >>confcache
+if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
+ if test -w "$cache_file"; then
+ if test "x$cache_file" != "x/dev/null"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
+$as_echo "$as_me: updating cache $cache_file" >&6;}
+ if test ! -f "$cache_file" || test -h "$cache_file"; then
+ cat confcache >"$cache_file"
+ else
+ case $cache_file in #(
+ */* | ?:*)
+ mv -f confcache "$cache_file"$$ &&
+ mv -f "$cache_file"$$ "$cache_file" ;; #(
+ *)
+ mv -f confcache "$cache_file" ;;
+ esac
+ fi
+ fi
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5
+$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
+ fi
+fi
+rm -f confcache
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+DEFS=-DHAVE_CONFIG_H
+
+ac_libobjs=
+ac_ltlibobjs=
+U=
+for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
+ # 1. Remove the extension, and $U if already installed.
+ ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
+ ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
+ # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR
+ # will be set to the directory where LIBOBJS objects are built.
+ as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext"
+ as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo'
+done
+LIBOBJS=$ac_libobjs
+
+LTLIBOBJS=$ac_ltlibobjs
+
+
+if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then
+ as_fn_error $? "conditional \"MAINTAINER_MODE\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${USE_NATIVE_INCLUDES_TRUE}" && test -z "${USE_NATIVE_INCLUDES_FALSE}"; then
+ as_fn_error $? "conditional \"USE_NATIVE_INCLUDES\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking that generated files are newer than configure" >&5
+$as_echo_n "checking that generated files are newer than configure... " >&6; }
+ if test -n "$am_sleep_pid"; then
+ # Hide warnings about reused PIDs.
+ wait $am_sleep_pid 2>/dev/null
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: done" >&5
+$as_echo "done" >&6; }
+if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
+ as_fn_error $? "conditional \"AMDEP\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
+ as_fn_error $? "conditional \"am__fastdepCC\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+ if test -n "$EXEEXT"; then
+ am__EXEEXT_TRUE=
+ am__EXEEXT_FALSE='#'
+else
+ am__EXEEXT_TRUE='#'
+ am__EXEEXT_FALSE=
+fi
+
+if test -z "${HAVE_AUDIT_SYSCALLS_TRUE}" && test -z "${HAVE_AUDIT_SYSCALLS_FALSE}"; then
+ as_fn_error $? "conditional \"HAVE_AUDIT_SYSCALLS\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${USE_MACH_IPC_TRUE}" && test -z "${USE_MACH_IPC_FALSE}"; then
+ as_fn_error $? "conditional \"USE_MACH_IPC\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+
+: "${CONFIG_STATUS=./config.status}"
+ac_write_fail=0
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files $CONFIG_STATUS"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5
+$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
+as_write_fail=0
+cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1
+#! $SHELL
+# Generated by $as_me.
+# Run this file to recreate the current configuration.
+# Compiler output produced by configure, useful for debugging
+# configure, is in config.log if it exists.
+
+debug=false
+ac_cs_recheck=false
+ac_cs_silent=false
+
+SHELL=\${CONFIG_SHELL-$SHELL}
+export SHELL
+_ASEOF
+cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+ emulate sh
+ NULLCMD=:
+ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in #(
+ *posix*) :
+ set -o posix ;; #(
+ *) :
+ ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='print -r --'
+ as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='printf %s\n'
+ as_echo_n='printf %s'
+else
+ if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+ as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+ as_echo_n='/usr/ucb/echo -n'
+ else
+ as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+ as_echo_n_body='eval
+ arg=$1;
+ case $arg in #(
+ *"$as_nl"*)
+ expr "X$arg" : "X\\(.*\\)$as_nl";
+ arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+ esac;
+ expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+ '
+ export as_echo_n_body
+ as_echo_n='sh -c $as_echo_n_body as_echo'
+ fi
+ export as_echo_body
+ as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ PATH_SEPARATOR=:
+ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+ (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+ PATH_SEPARATOR=';'
+ }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order. Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" "" $as_nl"
+
+# Find who we are. Look in the path if we contain no directory separator.
+as_myself=
+case $0 in #((
+ *[\\/]* ) as_myself=$0 ;;
+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+ as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+ $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+ exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there. '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with STATUS, using 1 if that was 0.
+as_fn_error ()
+{
+ as_status=$1; test $as_status -eq 0 && as_status=1
+ if test "$4"; then
+ as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+ fi
+ $as_echo "$as_me: error: $2" >&2
+ as_fn_exit $as_status
+} # as_fn_error
+
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+ return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+ set +e
+ as_fn_set_status $1
+ exit $1
+} # as_fn_exit
+
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+ { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+ eval 'as_fn_append ()
+ {
+ eval $1+=\$2
+ }'
+else
+ as_fn_append ()
+ {
+ eval $1=\$$1\$2
+ }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+ eval 'as_fn_arith ()
+ {
+ as_val=$(( $* ))
+ }'
+else
+ as_fn_arith ()
+ {
+ as_val=`expr "$@" || test $? -eq 1`
+ }
+fi # as_fn_arith
+
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+ as_basename=basename
+else
+ as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+ as_dirname=dirname
+else
+ as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+ sed '/^.*\/\([^/][^/]*\)\/*$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+ case `echo 'xy\c'` in
+ *c*) ECHO_T=' ';; # ECHO_T is single tab character.
+ xy) ECHO_C='\c';;
+ *) echo `echo ksh88 bug on AIX 6.1` > /dev/null
+ ECHO_T=' ';;
+ esac;;
+*)
+ ECHO_N='-n';;
+esac
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+ rm -f conf$$.dir/conf$$.file
+else
+ rm -f conf$$.dir
+ mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+ if ln -s conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s='ln -s'
+ # ... but there are two gotchas:
+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+ # In both cases, we have to default to `cp -pR'.
+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+ as_ln_s='cp -pR'
+ elif ln conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s=ln
+ else
+ as_ln_s='cp -pR'
+ fi
+else
+ as_ln_s='cp -pR'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+ case $as_dir in #(
+ -*) as_dir=./$as_dir;;
+ esac
+ test -d "$as_dir" || eval $as_mkdir_p || {
+ as_dirs=
+ while :; do
+ case $as_dir in #(
+ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+ *) as_qdir=$as_dir;;
+ esac
+ as_dirs="'$as_qdir' $as_dirs"
+ as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ test -d "$as_dir" && break
+ done
+ test -z "$as_dirs" || eval "mkdir $as_dirs"
+ } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+if mkdir -p . 2>/dev/null; then
+ as_mkdir_p='mkdir -p "$as_dir"'
+else
+ test -d ./-p && rmdir ./-p
+ as_mkdir_p=false
+fi
+
+
+# as_fn_executable_p FILE
+# -----------------------
+# Test if FILE is an executable regular file.
+as_fn_executable_p ()
+{
+ test -f "$1" && test -x "$1"
+} # as_fn_executable_p
+as_test_x='test -x'
+as_executable_p=as_fn_executable_p
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+exec 6>&1
+## ----------------------------------- ##
+## Main body of $CONFIG_STATUS script. ##
+## ----------------------------------- ##
+_ASEOF
+test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# Save the log message, to keep $0 and so on meaningful, and to
+# report actual input values of CONFIG_FILES etc. instead of their
+# values after options handling.
+ac_log="
+This file was extended by OpenBSM $as_me 1.2-alpha4, which was
+generated by GNU Autoconf 2.69. Invocation command line was
+
+ CONFIG_FILES = $CONFIG_FILES
+ CONFIG_HEADERS = $CONFIG_HEADERS
+ CONFIG_LINKS = $CONFIG_LINKS
+ CONFIG_COMMANDS = $CONFIG_COMMANDS
+ $ $0 $@
+
+on `(hostname || uname -n) 2>/dev/null | sed 1q`
+"
+
+_ACEOF
+
+case $ac_config_files in *"
+"*) set x $ac_config_files; shift; ac_config_files=$*;;
+esac
+
+case $ac_config_headers in *"
+"*) set x $ac_config_headers; shift; ac_config_headers=$*;;
+esac
+
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+# Files that config.status was made for.
+config_files="$ac_config_files"
+config_headers="$ac_config_headers"
+config_commands="$ac_config_commands"
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+ac_cs_usage="\
+\`$as_me' instantiates files and other configuration actions
+from templates according to the current configuration. Unless the files
+and actions are specified as TAGs, all are instantiated by default.
+
+Usage: $0 [OPTION]... [TAG]...
+
+ -h, --help print this help, then exit
+ -V, --version print version number and configuration settings, then exit
+ --config print configuration, then exit
+ -q, --quiet, --silent
+ do not print progress messages
+ -d, --debug don't remove temporary files
+ --recheck update $as_me by reconfiguring in the same conditions
+ --file=FILE[:TEMPLATE]
+ instantiate the configuration file FILE
+ --header=FILE[:TEMPLATE]
+ instantiate the configuration header FILE
+
+Configuration files:
+$config_files
+
+Configuration headers:
+$config_headers
+
+Configuration commands:
+$config_commands
+
+Report bugs to <trustedbsd-audit at TrustedBSD.org>."
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
+ac_cs_version="\\
+OpenBSM config.status 1.2-alpha4
+configured by $0, generated by GNU Autoconf 2.69,
+ with options \\"\$ac_cs_config\\"
+
+Copyright (C) 2012 Free Software Foundation, Inc.
+This config.status script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it."
+
+ac_pwd='$ac_pwd'
+srcdir='$srcdir'
+INSTALL='$INSTALL'
+MKDIR_P='$MKDIR_P'
+AWK='$AWK'
+test -n "\$AWK" || AWK=awk
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# The default lists apply if the user does not specify any file.
+ac_need_defaults=:
+while test $# != 0
+do
+ case $1 in
+ --*=?*)
+ ac_option=`expr "X$1" : 'X\([^=]*\)='`
+ ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
+ ac_shift=:
+ ;;
+ --*=)
+ ac_option=`expr "X$1" : 'X\([^=]*\)='`
+ ac_optarg=
+ ac_shift=:
+ ;;
+ *)
+ ac_option=$1
+ ac_optarg=$2
+ ac_shift=shift
+ ;;
+ esac
+
+ case $ac_option in
+ # Handling of the options.
+ -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+ ac_cs_recheck=: ;;
+ --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
+ $as_echo "$ac_cs_version"; exit ;;
+ --config | --confi | --conf | --con | --co | --c )
+ $as_echo "$ac_cs_config"; exit ;;
+ --debug | --debu | --deb | --de | --d | -d )
+ debug=: ;;
+ --file | --fil | --fi | --f )
+ $ac_shift
+ case $ac_optarg in
+ *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ '') as_fn_error $? "missing file argument" ;;
+ esac
+ as_fn_append CONFIG_FILES " '$ac_optarg'"
+ ac_need_defaults=false;;
+ --header | --heade | --head | --hea )
+ $ac_shift
+ case $ac_optarg in
+ *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ esac
+ as_fn_append CONFIG_HEADERS " '$ac_optarg'"
+ ac_need_defaults=false;;
+ --he | --h)
+ # Conflict between --help and --header
+ as_fn_error $? "ambiguous option: \`$1'
+Try \`$0 --help' for more information.";;
+ --help | --hel | -h )
+ $as_echo "$ac_cs_usage"; exit ;;
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil | --si | --s)
+ ac_cs_silent=: ;;
+
+ # This is an error.
+ -*) as_fn_error $? "unrecognized option: \`$1'
+Try \`$0 --help' for more information." ;;
+
+ *) as_fn_append ac_config_targets " $1"
+ ac_need_defaults=false ;;
+
+ esac
+ shift
+done
+
+ac_configure_extra_args=
+
+if $ac_cs_silent; then
+ exec 6>/dev/null
+ ac_configure_extra_args="$ac_configure_extra_args --silent"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+if \$ac_cs_recheck; then
+ set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+ shift
+ \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
+ CONFIG_SHELL='$SHELL'
+ export CONFIG_SHELL
+ exec "\$@"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+exec 5>>config.log
+{
+ echo
+ sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Running $as_me. ##
+_ASBOX
+ $as_echo "$ac_log"
+} >&5
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+#
+# INIT-COMMANDS
+#
+
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+sed_quote_subst='$sed_quote_subst'
+double_quote_subst='$double_quote_subst'
+delay_variable_subst='$delay_variable_subst'
+macro_version='`$ECHO "$macro_version" | $SED "$delay_single_quote_subst"`'
+macro_revision='`$ECHO "$macro_revision" | $SED "$delay_single_quote_subst"`'
+enable_shared='`$ECHO "$enable_shared" | $SED "$delay_single_quote_subst"`'
+enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`'
+pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`'
+enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`'
+SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`'
+ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`'
+PATH_SEPARATOR='`$ECHO "$PATH_SEPARATOR" | $SED "$delay_single_quote_subst"`'
+host_alias='`$ECHO "$host_alias" | $SED "$delay_single_quote_subst"`'
+host='`$ECHO "$host" | $SED "$delay_single_quote_subst"`'
+host_os='`$ECHO "$host_os" | $SED "$delay_single_quote_subst"`'
+build_alias='`$ECHO "$build_alias" | $SED "$delay_single_quote_subst"`'
+build='`$ECHO "$build" | $SED "$delay_single_quote_subst"`'
+build_os='`$ECHO "$build_os" | $SED "$delay_single_quote_subst"`'
+SED='`$ECHO "$SED" | $SED "$delay_single_quote_subst"`'
+Xsed='`$ECHO "$Xsed" | $SED "$delay_single_quote_subst"`'
+GREP='`$ECHO "$GREP" | $SED "$delay_single_quote_subst"`'
+EGREP='`$ECHO "$EGREP" | $SED "$delay_single_quote_subst"`'
+FGREP='`$ECHO "$FGREP" | $SED "$delay_single_quote_subst"`'
+LD='`$ECHO "$LD" | $SED "$delay_single_quote_subst"`'
+NM='`$ECHO "$NM" | $SED "$delay_single_quote_subst"`'
+LN_S='`$ECHO "$LN_S" | $SED "$delay_single_quote_subst"`'
+max_cmd_len='`$ECHO "$max_cmd_len" | $SED "$delay_single_quote_subst"`'
+ac_objext='`$ECHO "$ac_objext" | $SED "$delay_single_quote_subst"`'
+exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`'
+lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`'
+lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`'
+lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`'
+lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_quote_subst"`'
+lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`'
+reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`'
+reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`'
+OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`'
+deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`'
+file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`'
+file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`'
+want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`'
+DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`'
+sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`'
+AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`'
+AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`'
+archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`'
+STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`'
+RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`'
+old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`'
+old_postuninstall_cmds='`$ECHO "$old_postuninstall_cmds" | $SED "$delay_single_quote_subst"`'
+old_archive_cmds='`$ECHO "$old_archive_cmds" | $SED "$delay_single_quote_subst"`'
+lock_old_archive_extraction='`$ECHO "$lock_old_archive_extraction" | $SED "$delay_single_quote_subst"`'
+CC='`$ECHO "$CC" | $SED "$delay_single_quote_subst"`'
+CFLAGS='`$ECHO "$CFLAGS" | $SED "$delay_single_quote_subst"`'
+compiler='`$ECHO "$compiler" | $SED "$delay_single_quote_subst"`'
+GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`'
+nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`'
+lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`'
+objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`'
+MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`'
+lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`'
+need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`'
+MANIFEST_TOOL='`$ECHO "$MANIFEST_TOOL" | $SED "$delay_single_quote_subst"`'
+DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`'
+NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`'
+LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`'
+OTOOL='`$ECHO "$OTOOL" | $SED "$delay_single_quote_subst"`'
+OTOOL64='`$ECHO "$OTOOL64" | $SED "$delay_single_quote_subst"`'
+libext='`$ECHO "$libext" | $SED "$delay_single_quote_subst"`'
+shrext_cmds='`$ECHO "$shrext_cmds" | $SED "$delay_single_quote_subst"`'
+extract_expsyms_cmds='`$ECHO "$extract_expsyms_cmds" | $SED "$delay_single_quote_subst"`'
+archive_cmds_need_lc='`$ECHO "$archive_cmds_need_lc" | $SED "$delay_single_quote_subst"`'
+enable_shared_with_static_runtimes='`$ECHO "$enable_shared_with_static_runtimes" | $SED "$delay_single_quote_subst"`'
+export_dynamic_flag_spec='`$ECHO "$export_dynamic_flag_spec" | $SED "$delay_single_quote_subst"`'
+whole_archive_flag_spec='`$ECHO "$whole_archive_flag_spec" | $SED "$delay_single_quote_subst"`'
+compiler_needs_object='`$ECHO "$compiler_needs_object" | $SED "$delay_single_quote_subst"`'
+old_archive_from_new_cmds='`$ECHO "$old_archive_from_new_cmds" | $SED "$delay_single_quote_subst"`'
+old_archive_from_expsyms_cmds='`$ECHO "$old_archive_from_expsyms_cmds" | $SED "$delay_single_quote_subst"`'
+archive_cmds='`$ECHO "$archive_cmds" | $SED "$delay_single_quote_subst"`'
+archive_expsym_cmds='`$ECHO "$archive_expsym_cmds" | $SED "$delay_single_quote_subst"`'
+module_cmds='`$ECHO "$module_cmds" | $SED "$delay_single_quote_subst"`'
+module_expsym_cmds='`$ECHO "$module_expsym_cmds" | $SED "$delay_single_quote_subst"`'
+with_gnu_ld='`$ECHO "$with_gnu_ld" | $SED "$delay_single_quote_subst"`'
+allow_undefined_flag='`$ECHO "$allow_undefined_flag" | $SED "$delay_single_quote_subst"`'
+no_undefined_flag='`$ECHO "$no_undefined_flag" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec='`$ECHO "$hardcode_libdir_flag_spec" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_separator='`$ECHO "$hardcode_libdir_separator" | $SED "$delay_single_quote_subst"`'
+hardcode_direct='`$ECHO "$hardcode_direct" | $SED "$delay_single_quote_subst"`'
+hardcode_direct_absolute='`$ECHO "$hardcode_direct_absolute" | $SED "$delay_single_quote_subst"`'
+hardcode_minus_L='`$ECHO "$hardcode_minus_L" | $SED "$delay_single_quote_subst"`'
+hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_quote_subst"`'
+hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`'
+inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`'
+link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`'
+always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`'
+export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`'
+exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`'
+include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`'
+prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`'
+postlink_cmds='`$ECHO "$postlink_cmds" | $SED "$delay_single_quote_subst"`'
+file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`'
+variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`'
+need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`'
+need_version='`$ECHO "$need_version" | $SED "$delay_single_quote_subst"`'
+version_type='`$ECHO "$version_type" | $SED "$delay_single_quote_subst"`'
+runpath_var='`$ECHO "$runpath_var" | $SED "$delay_single_quote_subst"`'
+shlibpath_var='`$ECHO "$shlibpath_var" | $SED "$delay_single_quote_subst"`'
+shlibpath_overrides_runpath='`$ECHO "$shlibpath_overrides_runpath" | $SED "$delay_single_quote_subst"`'
+libname_spec='`$ECHO "$libname_spec" | $SED "$delay_single_quote_subst"`'
+library_names_spec='`$ECHO "$library_names_spec" | $SED "$delay_single_quote_subst"`'
+soname_spec='`$ECHO "$soname_spec" | $SED "$delay_single_quote_subst"`'
+install_override_mode='`$ECHO "$install_override_mode" | $SED "$delay_single_quote_subst"`'
+postinstall_cmds='`$ECHO "$postinstall_cmds" | $SED "$delay_single_quote_subst"`'
+postuninstall_cmds='`$ECHO "$postuninstall_cmds" | $SED "$delay_single_quote_subst"`'
+finish_cmds='`$ECHO "$finish_cmds" | $SED "$delay_single_quote_subst"`'
+finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`'
+hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`'
+sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`'
+sys_lib_dlsearch_path_spec='`$ECHO "$sys_lib_dlsearch_path_spec" | $SED "$delay_single_quote_subst"`'
+hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`'
+enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`'
+enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`'
+enable_dlopen_self_static='`$ECHO "$enable_dlopen_self_static" | $SED "$delay_single_quote_subst"`'
+old_striplib='`$ECHO "$old_striplib" | $SED "$delay_single_quote_subst"`'
+striplib='`$ECHO "$striplib" | $SED "$delay_single_quote_subst"`'
+
+LTCC='$LTCC'
+LTCFLAGS='$LTCFLAGS'
+compiler='$compiler_DEFAULT'
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+ eval 'cat <<_LTECHO_EOF
+\$1
+_LTECHO_EOF'
+}
+
+# Quote evaled strings.
+for var in SHELL \
+ECHO \
+PATH_SEPARATOR \
+SED \
+GREP \
+EGREP \
+FGREP \
+LD \
+NM \
+LN_S \
+lt_SP2NL \
+lt_NL2SP \
+reload_flag \
+OBJDUMP \
+deplibs_check_method \
+file_magic_cmd \
+file_magic_glob \
+want_nocaseglob \
+DLLTOOL \
+sharedlib_from_linklib_cmd \
+AR \
+AR_FLAGS \
+archiver_list_spec \
+STRIP \
+RANLIB \
+CC \
+CFLAGS \
+compiler \
+lt_cv_sys_global_symbol_pipe \
+lt_cv_sys_global_symbol_to_cdecl \
+lt_cv_sys_global_symbol_to_c_name_address \
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \
+nm_file_list_spec \
+lt_prog_compiler_no_builtin_flag \
+lt_prog_compiler_pic \
+lt_prog_compiler_wl \
+lt_prog_compiler_static \
+lt_cv_prog_compiler_c_o \
+need_locks \
+MANIFEST_TOOL \
+DSYMUTIL \
+NMEDIT \
+LIPO \
+OTOOL \
+OTOOL64 \
+shrext_cmds \
+export_dynamic_flag_spec \
+whole_archive_flag_spec \
+compiler_needs_object \
+with_gnu_ld \
+allow_undefined_flag \
+no_undefined_flag \
+hardcode_libdir_flag_spec \
+hardcode_libdir_separator \
+exclude_expsyms \
+include_expsyms \
+file_list_spec \
+variables_saved_for_relink \
+libname_spec \
+library_names_spec \
+soname_spec \
+install_override_mode \
+finish_eval \
+old_striplib \
+striplib; do
+ case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+ *[\\\\\\\`\\"\\\$]*)
+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+ ;;
+ *)
+ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+ ;;
+ esac
+done
+
+# Double-quote double-evaled strings.
+for var in reload_cmds \
+old_postinstall_cmds \
+old_postuninstall_cmds \
+old_archive_cmds \
+extract_expsyms_cmds \
+old_archive_from_new_cmds \
+old_archive_from_expsyms_cmds \
+archive_cmds \
+archive_expsym_cmds \
+module_cmds \
+module_expsym_cmds \
+export_symbols_cmds \
+prelink_cmds \
+postlink_cmds \
+postinstall_cmds \
+postuninstall_cmds \
+finish_cmds \
+sys_lib_search_path_spec \
+sys_lib_dlsearch_path_spec; do
+ case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+ *[\\\\\\\`\\"\\\$]*)
+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+ ;;
+ *)
+ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+ ;;
+ esac
+done
+
+ac_aux_dir='$ac_aux_dir'
+xsi_shell='$xsi_shell'
+lt_shell_append='$lt_shell_append'
+
+# See if we are running on zsh, and set the options which allow our
+# commands through without removal of \ escapes INIT.
+if test -n "\${ZSH_VERSION+set}" ; then
+ setopt NO_GLOB_SUBST
+fi
+
+
+ PACKAGE='$PACKAGE'
+ VERSION='$VERSION'
+ TIMESTAMP='$TIMESTAMP'
+ RM='$RM'
+ ofile='$ofile'
+
+
+
+AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+
+# Handling of arguments.
+for ac_config_target in $ac_config_targets
+do
+ case $ac_config_target in
+ "config/config.h") CONFIG_HEADERS="$CONFIG_HEADERS config/config.h" ;;
+ "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;;
+ "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
+ "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+ "bin/Makefile") CONFIG_FILES="$CONFIG_FILES bin/Makefile" ;;
+ "bin/audit/Makefile") CONFIG_FILES="$CONFIG_FILES bin/audit/Makefile" ;;
+ "bin/auditd/Makefile") CONFIG_FILES="$CONFIG_FILES bin/auditd/Makefile" ;;
+ "bin/auditdistd/Makefile") CONFIG_FILES="$CONFIG_FILES bin/auditdistd/Makefile" ;;
+ "bin/auditfilterd/Makefile") CONFIG_FILES="$CONFIG_FILES bin/auditfilterd/Makefile" ;;
+ "bin/auditreduce/Makefile") CONFIG_FILES="$CONFIG_FILES bin/auditreduce/Makefile" ;;
+ "bin/praudit/Makefile") CONFIG_FILES="$CONFIG_FILES bin/praudit/Makefile" ;;
+ "bsm/Makefile") CONFIG_FILES="$CONFIG_FILES bsm/Makefile" ;;
+ "libauditd/Makefile") CONFIG_FILES="$CONFIG_FILES libauditd/Makefile" ;;
+ "libbsm/Makefile") CONFIG_FILES="$CONFIG_FILES libbsm/Makefile" ;;
+ "modules/Makefile") CONFIG_FILES="$CONFIG_FILES modules/Makefile" ;;
+ "modules/auditfilter_noop/Makefile") CONFIG_FILES="$CONFIG_FILES modules/auditfilter_noop/Makefile" ;;
+ "man/Makefile") CONFIG_FILES="$CONFIG_FILES man/Makefile" ;;
+ "sys/Makefile") CONFIG_FILES="$CONFIG_FILES sys/Makefile" ;;
+ "sys/bsm/Makefile") CONFIG_FILES="$CONFIG_FILES sys/bsm/Makefile" ;;
+ "test/Makefile") CONFIG_FILES="$CONFIG_FILES test/Makefile" ;;
+ "test/bsm/Makefile") CONFIG_FILES="$CONFIG_FILES test/bsm/Makefile" ;;
+ "tools/Makefile") CONFIG_FILES="$CONFIG_FILES tools/Makefile" ;;
+
+ *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
+ esac
+done
+
+
+# If the user did not use the arguments to specify the items to instantiate,
+# then the envvar interface is used. Set only those that are not.
+# We use the long form for the default assignment because of an extremely
+# bizarre bug on SunOS 4.1.3.
+if $ac_need_defaults; then
+ test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
+ test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
+ test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
+fi
+
+# Have a temporary directory for convenience. Make it in the build tree
+# simply because there is no reason against having it here, and in addition,
+# creating and moving files from /tmp can sometimes cause problems.
+# Hook for its removal unless debugging.
+# Note that there is a small window in which the directory will not be cleaned:
+# after its creation but before its name has been assigned to `$tmp'.
+$debug ||
+{
+ tmp= ac_tmp=
+ trap 'exit_status=$?
+ : "${ac_tmp:=$tmp}"
+ { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status
+' 0
+ trap 'as_fn_exit 1' 1 2 13 15
+}
+# Create a (secure) tmp directory for tmp files.
+
+{
+ tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
+ test -d "$tmp"
+} ||
+{
+ tmp=./conf$$-$RANDOM
+ (umask 077 && mkdir "$tmp")
+} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5
+ac_tmp=$tmp
+
+# Set up the scripts for CONFIG_FILES section.
+# No need to generate them if there are no CONFIG_FILES.
+# This happens for instance with `./config.status config.h'.
+if test -n "$CONFIG_FILES"; then
+
+
+ac_cr=`echo X | tr X '\015'`
+# On cygwin, bash can eat \r inside `` if the user requested igncr.
+# But we know of no other shell where ac_cr would be empty at this
+# point, so we can use a bashism as a fallback.
+if test "x$ac_cr" = x; then
+ eval ac_cr=\$\'\\r\'
+fi
+ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
+if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
+ ac_cs_awk_cr='\\r'
+else
+ ac_cs_awk_cr=$ac_cr
+fi
+
+echo 'BEGIN {' >"$ac_tmp/subs1.awk" &&
+_ACEOF
+
+
+{
+ echo "cat >conf$$subs.awk <<_ACEOF" &&
+ echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
+ echo "_ACEOF"
+} >conf$$subs.sh ||
+ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'`
+ac_delim='%!_!# '
+for ac_last_try in false false false false false :; do
+ . ./conf$$subs.sh ||
+ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+
+ ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
+ if test $ac_delim_n = $ac_delim_num; then
+ break
+ elif $ac_last_try; then
+ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+ else
+ ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+ fi
+done
+rm -f conf$$subs.sh
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK &&
+_ACEOF
+sed -n '
+h
+s/^/S["/; s/!.*/"]=/
+p
+g
+s/^[^!]*!//
+:repl
+t repl
+s/'"$ac_delim"'$//
+t delim
+:nl
+h
+s/\(.\{148\}\)..*/\1/
+t more1
+s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
+p
+n
+b repl
+:more1
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t nl
+:delim
+h
+s/\(.\{148\}\)..*/\1/
+t more2
+s/["\\]/\\&/g; s/^/"/; s/$/"/
+p
+b
+:more2
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t delim
+' <conf$$subs.awk | sed '
+/^[^""]/{
+ N
+ s/\n//
+}
+' >>$CONFIG_STATUS || ac_write_fail=1
+rm -f conf$$subs.awk
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+_ACAWK
+cat >>"\$ac_tmp/subs1.awk" <<_ACAWK &&
+ for (key in S) S_is_set[key] = 1
+ FS = ""
+
+}
+{
+ line = $ 0
+ nfields = split(line, field, "@")
+ substed = 0
+ len = length(field[1])
+ for (i = 2; i < nfields; i++) {
+ key = field[i]
+ keylen = length(key)
+ if (S_is_set[key]) {
+ value = S[key]
+ line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
+ len += length(value) + length(field[++i])
+ substed = 1
+ } else
+ len += 1 + keylen
+ }
+
+ print line
+}
+
+_ACAWK
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
+ sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
+else
+ cat
+fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \
+ || as_fn_error $? "could not setup config files machinery" "$LINENO" 5
+_ACEOF
+
+# VPATH may cause trouble with some makes, so we remove sole $(srcdir),
+# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and
+# trailing colons and then remove the whole line if VPATH becomes empty
+# (actually we leave an empty line to preserve line numbers).
+if test "x$srcdir" = x.; then
+ ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{
+h
+s///
+s/^/:/
+s/[ ]*$/:/
+s/:\$(srcdir):/:/g
+s/:\${srcdir}:/:/g
+s/:@srcdir@:/:/g
+s/^:*//
+s/:*$//
+x
+s/\(=[ ]*\).*/\1/
+G
+s/\n//
+s/^[^=]*=[ ]*$//
+}'
+fi
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+fi # test -n "$CONFIG_FILES"
+
+# Set up the scripts for CONFIG_HEADERS section.
+# No need to generate them if there are no CONFIG_HEADERS.
+# This happens for instance with `./config.status Makefile'.
+if test -n "$CONFIG_HEADERS"; then
+cat >"$ac_tmp/defines.awk" <<\_ACAWK ||
+BEGIN {
+_ACEOF
+
+# Transform confdefs.h into an awk script `defines.awk', embedded as
+# here-document in config.status, that substitutes the proper values into
+# config.h.in to produce config.h.
+
+# Create a delimiter string that does not exist in confdefs.h, to ease
+# handling of long lines.
+ac_delim='%!_!# '
+for ac_last_try in false false :; do
+ ac_tt=`sed -n "/$ac_delim/p" confdefs.h`
+ if test -z "$ac_tt"; then
+ break
+ elif $ac_last_try; then
+ as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5
+ else
+ ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+ fi
+done
+
+# For the awk script, D is an array of macro values keyed by name,
+# likewise P contains macro parameters if any. Preserve backslash
+# newline sequences.
+
+ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]*
+sed -n '
+s/.\{148\}/&'"$ac_delim"'/g
+t rset
+:rset
+s/^[ ]*#[ ]*define[ ][ ]*/ /
+t def
+d
+:def
+s/\\$//
+t bsnl
+s/["\\]/\\&/g
+s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\
+D["\1"]=" \3"/p
+s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p
+d
+:bsnl
+s/["\\]/\\&/g
+s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\
+D["\1"]=" \3\\\\\\n"\\/p
+t cont
+s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p
+t cont
+d
+:cont
+n
+s/.\{148\}/&'"$ac_delim"'/g
+t clear
+:clear
+s/\\$//
+t bsnlc
+s/["\\]/\\&/g; s/^/"/; s/$/"/p
+d
+:bsnlc
+s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p
+b cont
+' <confdefs.h | sed '
+s/'"$ac_delim"'/"\\\
+"/g' >>$CONFIG_STATUS || ac_write_fail=1
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ for (key in D) D_is_set[key] = 1
+ FS = ""
+}
+/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ {
+ line = \$ 0
+ split(line, arg, " ")
+ if (arg[1] == "#") {
+ defundef = arg[2]
+ mac1 = arg[3]
+ } else {
+ defundef = substr(arg[1], 2)
+ mac1 = arg[2]
+ }
+ split(mac1, mac2, "(") #)
+ macro = mac2[1]
+ prefix = substr(line, 1, index(line, defundef) - 1)
+ if (D_is_set[macro]) {
+ # Preserve the white space surrounding the "#".
+ print prefix "define", macro P[macro] D[macro]
+ next
+ } else {
+ # Replace #undef with comments. This is necessary, for example,
+ # in the case of _POSIX_SOURCE, which is predefined and required
+ # on some systems where configure will not decide to define it.
+ if (defundef == "undef") {
+ print "/*", prefix defundef, macro, "*/"
+ next
+ }
+ }
+}
+{ print }
+_ACAWK
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+ as_fn_error $? "could not setup config headers machinery" "$LINENO" 5
+fi # test -n "$CONFIG_HEADERS"
+
+
+eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS"
+shift
+for ac_tag
+do
+ case $ac_tag in
+ :[FHLC]) ac_mode=$ac_tag; continue;;
+ esac
+ case $ac_mode$ac_tag in
+ :[FHL]*:*);;
+ :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;;
+ :[FH]-) ac_tag=-:-;;
+ :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
+ esac
+ ac_save_IFS=$IFS
+ IFS=:
+ set x $ac_tag
+ IFS=$ac_save_IFS
+ shift
+ ac_file=$1
+ shift
+
+ case $ac_mode in
+ :L) ac_source=$1;;
+ :[FH])
+ ac_file_inputs=
+ for ac_f
+ do
+ case $ac_f in
+ -) ac_f="$ac_tmp/stdin";;
+ *) # Look for the file first in the build tree, then in the source tree
+ # (if the path is not absolute). The absolute path cannot be DOS-style,
+ # because $ac_f cannot contain `:'.
+ test -f "$ac_f" ||
+ case $ac_f in
+ [\\/$]*) false;;
+ *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
+ esac ||
+ as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;;
+ esac
+ case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
+ as_fn_append ac_file_inputs " '$ac_f'"
+ done
+
+ # Let's still pretend it is `configure' which instantiates (i.e., don't
+ # use $as_me), people would be surprised to read:
+ # /* config.h. Generated by config.status. */
+ configure_input='Generated from '`
+ $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
+ `' by configure.'
+ if test x"$ac_file" != x-; then
+ configure_input="$ac_file. $configure_input"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
+$as_echo "$as_me: creating $ac_file" >&6;}
+ fi
+ # Neutralize special characters interpreted by sed in replacement strings.
+ case $configure_input in #(
+ *\&* | *\|* | *\\* )
+ ac_sed_conf_input=`$as_echo "$configure_input" |
+ sed 's/[\\\\&|]/\\\\&/g'`;; #(
+ *) ac_sed_conf_input=$configure_input;;
+ esac
+
+ case $ac_tag in
+ *:-:* | *:-) cat >"$ac_tmp/stdin" \
+ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;
+ esac
+ ;;
+ esac
+
+ ac_dir=`$as_dirname -- "$ac_file" ||
+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$ac_file" : 'X\(//\)[^/]' \| \
+ X"$ac_file" : 'X\(//\)$' \| \
+ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$ac_file" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ as_dir="$ac_dir"; as_fn_mkdir_p
+ ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+ ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+ # A ".." for each directory in $ac_dir_suffix.
+ ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+ case $ac_top_builddir_sub in
+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+ esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+ .) # We are building in place.
+ ac_srcdir=.
+ ac_top_srcdir=$ac_top_builddir_sub
+ ac_abs_top_srcdir=$ac_pwd ;;
+ [\\/]* | ?:[\\/]* ) # Absolute name.
+ ac_srcdir=$srcdir$ac_dir_suffix;
+ ac_top_srcdir=$srcdir
+ ac_abs_top_srcdir=$srcdir ;;
+ *) # Relative name.
+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_build_prefix$srcdir
+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+
+ case $ac_mode in
+ :F)
+ #
+ # CONFIG_FILE
+ #
+
+ case $INSTALL in
+ [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
+ *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
+ esac
+ ac_MKDIR_P=$MKDIR_P
+ case $MKDIR_P in
+ [\\/$]* | ?:[\\/]* ) ;;
+ */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
+ esac
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# If the template does not know about datarootdir, expand it.
+# FIXME: This hack should be removed a few years after 2.60.
+ac_datarootdir_hack=; ac_datarootdir_seen=
+ac_sed_dataroot='
+/datarootdir/ {
+ p
+ q
+}
+/@datadir@/p
+/@docdir@/p
+/@infodir@/p
+/@localedir@/p
+/@mandir@/p'
+case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
+*datarootdir*) ac_datarootdir_seen=yes;;
+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
+$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ ac_datarootdir_hack='
+ s&@datadir@&$datadir&g
+ s&@docdir@&$docdir&g
+ s&@infodir@&$infodir&g
+ s&@localedir@&$localedir&g
+ s&@mandir@&$mandir&g
+ s&\\\${datarootdir}&$datarootdir&g' ;;
+esac
+_ACEOF
+
+# Neutralize VPATH when `$srcdir' = `.'.
+# Shell code in configure.ac might set extrasub.
+# FIXME: do we really want to maintain this feature?
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_sed_extra="$ac_vpsub
+$extrasub
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+:t
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
+s|@configure_input@|$ac_sed_conf_input|;t t
+s&@top_builddir@&$ac_top_builddir_sub&;t t
+s&@top_build_prefix@&$ac_top_build_prefix&;t t
+s&@srcdir@&$ac_srcdir&;t t
+s&@abs_srcdir@&$ac_abs_srcdir&;t t
+s&@top_srcdir@&$ac_top_srcdir&;t t
+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
+s&@builddir@&$ac_builddir&;t t
+s&@abs_builddir@&$ac_abs_builddir&;t t
+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
+s&@INSTALL@&$ac_INSTALL&;t t
+s&@MKDIR_P@&$ac_MKDIR_P&;t t
+$ac_datarootdir_hack
+"
+eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \
+ >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+
+test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
+ { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
+ { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \
+ "$ac_tmp/out"`; test -z "$ac_out"; } &&
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined. Please make sure it is defined" >&5
+$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined. Please make sure it is defined" >&2;}
+
+ rm -f "$ac_tmp/stdin"
+ case $ac_file in
+ -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";;
+ *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";;
+ esac \
+ || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+ ;;
+ :H)
+ #
+ # CONFIG_HEADER
+ #
+ if test x"$ac_file" != x-; then
+ {
+ $as_echo "/* $configure_input */" \
+ && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs"
+ } >"$ac_tmp/config.h" \
+ || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+ if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5
+$as_echo "$as_me: $ac_file is unchanged" >&6;}
+ else
+ rm -f "$ac_file"
+ mv "$ac_tmp/config.h" "$ac_file" \
+ || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+ fi
+ else
+ $as_echo "/* $configure_input */" \
+ && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \
+ || as_fn_error $? "could not create -" "$LINENO" 5
+ fi
+# Compute "$ac_file"'s index in $config_headers.
+_am_arg="$ac_file"
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+ case $_am_header in
+ $_am_arg | $_am_arg:* )
+ break ;;
+ * )
+ _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+ esac
+done
+echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" ||
+$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$_am_arg" : 'X\(//\)[^/]' \| \
+ X"$_am_arg" : 'X\(//\)$' \| \
+ X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$_am_arg" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`/stamp-h$_am_stamp_count
+ ;;
+
+ :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5
+$as_echo "$as_me: executing $ac_file commands" >&6;}
+ ;;
+ esac
+
+
+ case $ac_file$ac_mode in
+ "libtool":C)
+
+ # See if we are running on zsh, and set the options which allow our
+ # commands through without removal of \ escapes.
+ if test -n "${ZSH_VERSION+set}" ; then
+ setopt NO_GLOB_SUBST
+ fi
+
+ cfgfile="${ofile}T"
+ trap "$RM \"$cfgfile\"; exit 1" 1 2 15
+ $RM "$cfgfile"
+
+ cat <<_LT_EOF >> "$cfgfile"
+#! $SHELL
+
+# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
+# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+#
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+# 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+# Foundation, Inc.
+# Written by Gordon Matzigkeit, 1996
+#
+# This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# As a special exception to the GNU General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU Libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING. If not, a copy
+# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
+# obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+
+# The names of the tagged configurations supported by this script.
+available_tags=""
+
+# ### BEGIN LIBTOOL CONFIG
+
+# Which release of libtool.m4 was used?
+macro_version=$macro_version
+macro_revision=$macro_revision
+
+# Whether or not to build shared libraries.
+build_libtool_libs=$enable_shared
+
+# Whether or not to build static libraries.
+build_old_libs=$enable_static
+
+# What type of objects to build.
+pic_mode=$pic_mode
+
+# Whether or not to optimize for fast installation.
+fast_install=$enable_fast_install
+
+# Shell to use when invoking shell scripts.
+SHELL=$lt_SHELL
+
+# An echo program that protects backslashes.
+ECHO=$lt_ECHO
+
+# The PATH separator for the build system.
+PATH_SEPARATOR=$lt_PATH_SEPARATOR
+
+# The host system.
+host_alias=$host_alias
+host=$host
+host_os=$host_os
+
+# The build system.
+build_alias=$build_alias
+build=$build
+build_os=$build_os
+
+# A sed program that does not truncate output.
+SED=$lt_SED
+
+# Sed that helps us avoid accidentally triggering echo(1) options like -n.
+Xsed="\$SED -e 1s/^X//"
+
+# A grep program that handles long lines.
+GREP=$lt_GREP
+
+# An ERE matcher.
+EGREP=$lt_EGREP
+
+# A literal string matcher.
+FGREP=$lt_FGREP
+
+# A BSD- or MS-compatible name lister.
+NM=$lt_NM
+
+# Whether we need soft or hard links.
+LN_S=$lt_LN_S
+
+# What is the maximum length of a command?
+max_cmd_len=$max_cmd_len
+
+# Object file suffix (normally "o").
+objext=$ac_objext
+
+# Executable file suffix (normally "").
+exeext=$exeext
+
+# whether the shell understands "unset".
+lt_unset=$lt_unset
+
+# turn spaces into newlines.
+SP2NL=$lt_lt_SP2NL
+
+# turn newlines into spaces.
+NL2SP=$lt_lt_NL2SP
+
+# convert \$build file names to \$host format.
+to_host_file_cmd=$lt_cv_to_host_file_cmd
+
+# convert \$build files to toolchain format.
+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
+
+# An object symbol dumper.
+OBJDUMP=$lt_OBJDUMP
+
+# Method to check whether dependent libraries are shared objects.
+deplibs_check_method=$lt_deplibs_check_method
+
+# Command to use when deplibs_check_method = "file_magic".
+file_magic_cmd=$lt_file_magic_cmd
+
+# How to find potential files when deplibs_check_method = "file_magic".
+file_magic_glob=$lt_file_magic_glob
+
+# Find potential files using nocaseglob when deplibs_check_method = "file_magic".
+want_nocaseglob=$lt_want_nocaseglob
+
+# DLL creation program.
+DLLTOOL=$lt_DLLTOOL
+
+# Command to associate shared and link libraries.
+sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd
+
+# The archiver.
+AR=$lt_AR
+
+# Flags to create an archive.
+AR_FLAGS=$lt_AR_FLAGS
+
+# How to feed a file listing to the archiver.
+archiver_list_spec=$lt_archiver_list_spec
+
+# A symbol stripping program.
+STRIP=$lt_STRIP
+
+# Commands used to install an old-style archive.
+RANLIB=$lt_RANLIB
+old_postinstall_cmds=$lt_old_postinstall_cmds
+old_postuninstall_cmds=$lt_old_postuninstall_cmds
+
+# Whether to use a lock for old archive extraction.
+lock_old_archive_extraction=$lock_old_archive_extraction
+
+# A C compiler.
+LTCC=$lt_CC
+
+# LTCC compiler flags.
+LTCFLAGS=$lt_CFLAGS
+
+# Take the output of nm and produce a listing of raw symbols and C names.
+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
+
+# Transform the output of nm in a proper C declaration.
+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
+
+# Transform the output of nm in a C name address pair.
+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
+
+# Transform the output of nm in a C name address pair when lib prefix is needed.
+global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix
+
+# Specify filename containing input files for \$NM.
+nm_file_list_spec=$lt_nm_file_list_spec
+
+# The root where to search for dependent libraries,and in which our libraries should be installed.
+lt_sysroot=$lt_sysroot
+
+# The name of the directory that contains temporary libtool files.
+objdir=$objdir
+
+# Used to examine libraries when file_magic_cmd begins with "file".
+MAGIC_CMD=$MAGIC_CMD
+
+# Must we lock files when doing compilation?
+need_locks=$lt_need_locks
+
+# Manifest tool.
+MANIFEST_TOOL=$lt_MANIFEST_TOOL
+
+# Tool to manipulate archived DWARF debug symbol files on Mac OS X.
+DSYMUTIL=$lt_DSYMUTIL
+
+# Tool to change global to local symbols on Mac OS X.
+NMEDIT=$lt_NMEDIT
+
+# Tool to manipulate fat objects and archives on Mac OS X.
+LIPO=$lt_LIPO
+
+# ldd/readelf like tool for Mach-O binaries on Mac OS X.
+OTOOL=$lt_OTOOL
+
+# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4.
+OTOOL64=$lt_OTOOL64
+
+# Old archive suffix (normally "a").
+libext=$libext
+
+# Shared library suffix (normally ".so").
+shrext_cmds=$lt_shrext_cmds
+
+# The commands to extract the exported symbol list from a shared archive.
+extract_expsyms_cmds=$lt_extract_expsyms_cmds
+
+# Variables whose values should be saved in libtool wrapper scripts and
+# restored at link time.
+variables_saved_for_relink=$lt_variables_saved_for_relink
+
+# Do we need the "lib" prefix for modules?
+need_lib_prefix=$need_lib_prefix
+
+# Do we need a version for libraries?
+need_version=$need_version
+
+# Library versioning type.
+version_type=$version_type
+
+# Shared library runtime path variable.
+runpath_var=$runpath_var
+
+# Shared library path variable.
+shlibpath_var=$shlibpath_var
+
+# Is shlibpath searched before the hard-coded library search path?
+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
+
+# Format of library name prefix.
+libname_spec=$lt_libname_spec
+
+# List of archive names. First name is the real one, the rest are links.
+# The last name is the one that the linker finds with -lNAME
+library_names_spec=$lt_library_names_spec
+
+# The coded name of the library, if different from the real name.
+soname_spec=$lt_soname_spec
+
+# Permission mode override for installation of shared libraries.
+install_override_mode=$lt_install_override_mode
+
+# Command to use after installation of a shared archive.
+postinstall_cmds=$lt_postinstall_cmds
+
+# Command to use after uninstallation of a shared archive.
+postuninstall_cmds=$lt_postuninstall_cmds
+
+# Commands used to finish a libtool library installation in a directory.
+finish_cmds=$lt_finish_cmds
+
+# As "finish_cmds", except a single script fragment to be evaled but
+# not shown.
+finish_eval=$lt_finish_eval
+
+# Whether we should hardcode library paths into libraries.
+hardcode_into_libs=$hardcode_into_libs
+
+# Compile-time system search path for libraries.
+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
+
+# Run-time system search path for libraries.
+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
+
+# Whether dlopen is supported.
+dlopen_support=$enable_dlopen
+
+# Whether dlopen of programs is supported.
+dlopen_self=$enable_dlopen_self
+
+# Whether dlopen of statically linked programs is supported.
+dlopen_self_static=$enable_dlopen_self_static
+
+# Commands to strip libraries.
+old_striplib=$lt_old_striplib
+striplib=$lt_striplib
+
+
+# The linker used to build libraries.
+LD=$lt_LD
+
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag
+reload_cmds=$lt_reload_cmds
+
+# Commands used to build an old-style archive.
+old_archive_cmds=$lt_old_archive_cmds
+
+# A language specific compiler.
+CC=$lt_compiler
+
+# Is the compiler the GNU compiler?
+with_gcc=$GCC
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag
+
+# Additional compiler flags for building library objects.
+pic_flag=$lt_lt_prog_compiler_pic
+
+# How to pass a linker flag through the compiler.
+wl=$lt_lt_prog_compiler_wl
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_lt_prog_compiler_static
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_lt_cv_prog_compiler_c_o
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$archive_cmds_need_lc
+
+# Whether or not to disallow shared libs when runtime libs are static.
+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_whole_archive_flag_spec
+
+# Whether the compiler copes with passing no objects directly.
+compiler_needs_object=$lt_compiler_needs_object
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds
+
+# Commands used to build a shared archive.
+archive_cmds=$lt_archive_cmds
+archive_expsym_cmds=$lt_archive_expsym_cmds
+
+# Commands used to build a loadable module if different from building
+# a shared archive.
+module_cmds=$lt_module_cmds
+module_expsym_cmds=$lt_module_expsym_cmds
+
+# Whether we are building with GNU ld or not.
+with_gnu_ld=$lt_with_gnu_ld
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_allow_undefined_flag
+
+# Flag that enforces no undefined symbols.
+no_undefined_flag=$lt_no_undefined_flag
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist
+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
+
+# Whether we need a single "-rpath" flag with a separated argument.
+hardcode_libdir_separator=$lt_hardcode_libdir_separator
+
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary.
+hardcode_direct=$hardcode_direct
+
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary and the resulting library dependency is
+# "absolute",i.e impossible to change by setting \${shlibpath_var} if the
+# library is relocated.
+hardcode_direct_absolute=$hardcode_direct_absolute
+
+# Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+# into the resulting binary.
+hardcode_minus_L=$hardcode_minus_L
+
+# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+# into the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var
+
+# Set to "yes" if building a shared library automatically hardcodes DIR
+# into the library and all subsequent libraries and executables linked
+# against it.
+hardcode_automatic=$hardcode_automatic
+
+# Set to yes if linker adds runtime paths of dependent libraries
+# to runtime path list.
+inherit_rpath=$inherit_rpath
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$link_all_deplibs
+
+# Set to "yes" if exported symbols are required.
+always_export_symbols=$always_export_symbols
+
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_export_symbols_cmds
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_exclude_expsyms
+
+# Symbols that must always be exported.
+include_expsyms=$lt_include_expsyms
+
+# Commands necessary for linking programs (against libraries) with templates.
+prelink_cmds=$lt_prelink_cmds
+
+# Commands necessary for finishing linking programs.
+postlink_cmds=$lt_postlink_cmds
+
+# Specify filename containing input files.
+file_list_spec=$lt_file_list_spec
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action
+
+# ### END LIBTOOL CONFIG
+
+_LT_EOF
+
+ case $host_os in
+ aix3*)
+ cat <<\_LT_EOF >> "$cfgfile"
+# AIX sometimes has problems with the GCC collect2 program. For some
+# reason, if we set the COLLECT_NAMES environment variable, the problems
+# vanish in a puff of smoke.
+if test "X${COLLECT_NAMES+set}" != Xset; then
+ COLLECT_NAMES=
+ export COLLECT_NAMES
+fi
+_LT_EOF
+ ;;
+ esac
+
+
+ltmain="$ac_aux_dir/ltmain.sh"
+
+
+ # We use sed instead of cat because bash on DJGPP gets confused if
+ # if finds mixed CR/LF and LF-only lines. Since sed operates in
+ # text mode, it properly converts lines to CR/LF. This bash problem
+ # is reportedly fixed, but why not run on old versions too?
+ sed '$q' "$ltmain" >> "$cfgfile" \
+ || (rm -f "$cfgfile"; exit 1)
+
+ if test x"$xsi_shell" = xyes; then
+ sed -e '/^func_dirname ()$/,/^} # func_dirname /c\
+func_dirname ()\
+{\
+\ case ${1} in\
+\ */*) func_dirname_result="${1%/*}${2}" ;;\
+\ * ) func_dirname_result="${3}" ;;\
+\ esac\
+} # Extended-shell func_dirname implementation' "$cfgfile" > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+ sed -e '/^func_basename ()$/,/^} # func_basename /c\
+func_basename ()\
+{\
+\ func_basename_result="${1##*/}"\
+} # Extended-shell func_basename implementation' "$cfgfile" > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+ sed -e '/^func_dirname_and_basename ()$/,/^} # func_dirname_and_basename /c\
+func_dirname_and_basename ()\
+{\
+\ case ${1} in\
+\ */*) func_dirname_result="${1%/*}${2}" ;;\
+\ * ) func_dirname_result="${3}" ;;\
+\ esac\
+\ func_basename_result="${1##*/}"\
+} # Extended-shell func_dirname_and_basename implementation' "$cfgfile" > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+ sed -e '/^func_stripname ()$/,/^} # func_stripname /c\
+func_stripname ()\
+{\
+\ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are\
+\ # positional parameters, so assign one to ordinary parameter first.\
+\ func_stripname_result=${3}\
+\ func_stripname_result=${func_stripname_result#"${1}"}\
+\ func_stripname_result=${func_stripname_result%"${2}"}\
+} # Extended-shell func_stripname implementation' "$cfgfile" > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+ sed -e '/^func_split_long_opt ()$/,/^} # func_split_long_opt /c\
+func_split_long_opt ()\
+{\
+\ func_split_long_opt_name=${1%%=*}\
+\ func_split_long_opt_arg=${1#*=}\
+} # Extended-shell func_split_long_opt implementation' "$cfgfile" > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+ sed -e '/^func_split_short_opt ()$/,/^} # func_split_short_opt /c\
+func_split_short_opt ()\
+{\
+\ func_split_short_opt_arg=${1#??}\
+\ func_split_short_opt_name=${1%"$func_split_short_opt_arg"}\
+} # Extended-shell func_split_short_opt implementation' "$cfgfile" > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+ sed -e '/^func_lo2o ()$/,/^} # func_lo2o /c\
+func_lo2o ()\
+{\
+\ case ${1} in\
+\ *.lo) func_lo2o_result=${1%.lo}.${objext} ;;\
+\ *) func_lo2o_result=${1} ;;\
+\ esac\
+} # Extended-shell func_lo2o implementation' "$cfgfile" > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+ sed -e '/^func_xform ()$/,/^} # func_xform /c\
+func_xform ()\
+{\
+ func_xform_result=${1%.*}.lo\
+} # Extended-shell func_xform implementation' "$cfgfile" > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+ sed -e '/^func_arith ()$/,/^} # func_arith /c\
+func_arith ()\
+{\
+ func_arith_result=$(( $* ))\
+} # Extended-shell func_arith implementation' "$cfgfile" > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+ sed -e '/^func_len ()$/,/^} # func_len /c\
+func_len ()\
+{\
+ func_len_result=${#1}\
+} # Extended-shell func_len implementation' "$cfgfile" > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+fi
+
+if test x"$lt_shell_append" = xyes; then
+ sed -e '/^func_append ()$/,/^} # func_append /c\
+func_append ()\
+{\
+ eval "${1}+=\\${2}"\
+} # Extended-shell func_append implementation' "$cfgfile" > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+ sed -e '/^func_append_quoted ()$/,/^} # func_append_quoted /c\
+func_append_quoted ()\
+{\
+\ func_quote_for_eval "${2}"\
+\ eval "${1}+=\\\\ \\$func_quote_for_eval_result"\
+} # Extended-shell func_append_quoted implementation' "$cfgfile" > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+ # Save a `func_append' function call where possible by direct use of '+='
+ sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+ test 0 -eq $? || _lt_function_replace_fail=:
+else
+ # Save a `func_append' function call even when '+=' is not available
+ sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+ test 0 -eq $? || _lt_function_replace_fail=:
+fi
+
+if test x"$_lt_function_replace_fail" = x":"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Unable to substitute extended shell functions in $ofile" >&5
+$as_echo "$as_me: WARNING: Unable to substitute extended shell functions in $ofile" >&2;}
+fi
+
+
+ mv -f "$cfgfile" "$ofile" ||
+ (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
+ chmod +x "$ofile"
+
+ ;;
+ "depfiles":C) test x"$AMDEP_TRUE" != x"" || {
+ # Autoconf 2.62 quotes --file arguments for eval, but not when files
+ # are listed without --file. Let's play safe and only enable the eval
+ # if we detect the quoting.
+ case $CONFIG_FILES in
+ *\'*) eval set x "$CONFIG_FILES" ;;
+ *) set x $CONFIG_FILES ;;
+ esac
+ shift
+ for mf
+ do
+ # Strip MF so we end up with the name of the file.
+ mf=`echo "$mf" | sed -e 's/:.*$//'`
+ # Check whether this is an Automake generated Makefile or not.
+ # We used to match only the files named 'Makefile.in', but
+ # some people rename them; so instead we look at the file content.
+ # Grep'ing the first line is not enough: some people post-process
+ # each Makefile.in and add a new line on top of each file to say so.
+ # Grep'ing the whole file is not good either: AIX grep has a line
+ # limit of 2048, but all sed's we know have understand at least 4000.
+ if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+ dirpart=`$as_dirname -- "$mf" ||
+$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$mf" : 'X\(//\)[^/]' \| \
+ X"$mf" : 'X\(//\)$' \| \
+ X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$mf" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ else
+ continue
+ fi
+ # Extract the definition of DEPDIR, am__include, and am__quote
+ # from the Makefile without running 'make'.
+ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+ test -z "$DEPDIR" && continue
+ am__include=`sed -n 's/^am__include = //p' < "$mf"`
+ test -z "am__include" && continue
+ am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+ # Find all dependency output files, they are included files with
+ # $(DEPDIR) in their names. We invoke sed twice because it is the
+ # simplest approach to changing $(DEPDIR) to its actual value in the
+ # expansion.
+ for file in `sed -n "
+ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do
+ # Make sure the directory exists.
+ test -f "$dirpart/$file" && continue
+ fdir=`$as_dirname -- "$file" ||
+$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$file" : 'X\(//\)[^/]' \| \
+ X"$file" : 'X\(//\)$' \| \
+ X"$file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$file" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ as_dir=$dirpart/$fdir; as_fn_mkdir_p
+ # echo "creating $dirpart/$file"
+ echo '# dummy' > "$dirpart/$file"
+ done
+ done
+}
+ ;;
+
+ esac
+done # for ac_tag
+
+
+as_fn_exit 0
+_ACEOF
+ac_clean_files=$ac_clean_files_save
+
+test $ac_write_fail = 0 ||
+ as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5
+
+
+# configure is writing to config.log, and then calls config.status.
+# config.status does its own redirection, appending to config.log.
+# Unfortunately, on DOS this fails, as config.log is still kept open
+# by configure, so config.status won't be able to write to it; its
+# output is simply discarded. So we exec the FD to /dev/null,
+# effectively closing config.log, so it can be properly (re)opened and
+# appended to by config.status. When coming back to configure, we
+# need to make the FD available again.
+if test "$no_create" != yes; then
+ ac_cs_success=:
+ ac_config_status_args=
+ test "$silent" = yes &&
+ ac_config_status_args="$ac_config_status_args --quiet"
+ exec 5>/dev/null
+ $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
+ exec 5>>config.log
+ # Use ||, not &&, to avoid exiting from the if with $? = 1, which
+ # would make configure fail if this is the last instruction.
+ $ac_cs_success || as_fn_exit 1
+fi
+if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
+$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
+fi
+
Deleted: vendor/openbsm/1.2_alpha4/configure.ac
===================================================================
--- vendor/openbsm/dist/configure.ac 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/configure.ac 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,113 +0,0 @@
-# -*- Autoconf -*-
-# Process this file with autoconf to produce a configure script.
-
-AC_PREREQ(2.59)
-AC_INIT([OpenBSM], [1.0], [trustedbsd-audit at TrustesdBSD.org],[openbsm])
-AC_REVISION([$P4: //depot/projects/trustedbsd/openbsm/configure.ac#36 $])
-AC_CONFIG_SRCDIR([bin/auditreduce/auditreduce.c])
-AC_CONFIG_AUX_DIR(config)
-AC_CONFIG_HEADER([config/config.h])
-AM_MAINTAINER_MODE
-
-# Checks for programs.
-AC_PROG_CC
-AC_PROG_INSTALL
-AC_PROG_LIBTOOL
-
-AM_INIT_AUTOMAKE(AC_PACKAGE_NAME, AC_PACKAGE_VERSION)
-
-AC_SEARCH_LIBS(dlsym, dl)
-AC_SEARCH_LIBS(clock_gettime, rt)
-
-# Checks for header files.
-AC_HEADER_STDC
-AC_HEADER_SYS_WAIT
-AC_CHECK_HEADERS([endian.h mach/mach.h machine/endian.h sys/endian.h])
-
-# Checks for typedefs, structures, and compiler characteristics.
-AC_C_CONST
-AC_TYPE_UID_T
-AC_TYPE_PID_T
-AC_TYPE_SIZE_T
-AC_CHECK_MEMBERS([struct stat.st_rdev])
-
-AC_CHECK_MEMBER([struct ipc_perm.__key],
-[AC_DEFINE(HAVE_IPC_PERM___KEY,, Define if ipc_perm.__key instead of key)],
-[],[
-#include <sys/types.h>
-#include <sys/ipc.h>
-])
-
-AC_CHECK_MEMBER([struct ipc_perm.__seq],
-[AC_DEFINE(HAVE_IPC_PERM___SEQ,, Define if ipc_perm.__seq instead of seq)],
-[],[
-#include <sys/types.h>
-#include <sys/ipc.h>
-])
-
-AC_HEADER_TIME
-AC_STRUCT_TM
-
-# Checks for library functions.
-AC_FUNC_CHOWN
-AC_FUNC_FORK
-AC_FUNC_MALLOC
-AC_FUNC_MKTIME
-AC_TYPE_SIGNAL
-AC_FUNC_STAT
-AC_FUNC_STRFTIME
-AC_CHECK_FUNCS([bzero clock_gettime ftruncate gettimeofday inet_ntoa memset strchr strerror strlcat strrchr strstr strtol strtoul])
-
-# sys/queue.h exists on most systems, but its capabilities vary a great deal.
-# test for LIST_FIRST and TAILQ_FOREACH_SAFE, which appears to not exist in
-# all of them, and are necessary for OpenBSM.
-AC_TRY_LINK([
- #include <sys/queue.h>
-], [
-
- #ifndef LIST_FIRST
- #error LIST_FIRST missing
- #endif
- #ifndef TAILQ_FOREACH_SAFE
- #error TAILQ_FOREACH_SAFE
- #endif
-], [
-AC_DEFINE(HAVE_FULL_QUEUE_H,, Define if queue.h includes LIST_FIRST)
-])
-
-# Systems may not define key audit system calls, in which case libbsm cannot
-# depend on them or it will generate link-time or run-time errors. Test for
-# just one.
-AC_TRY_LINK([
- #include <stdlib.h>
-
- extern int auditon(int, void *, int);
-], [
- int err;
-
- err = auditon(0, NULL, 0);
-], [
-AC_DEFINE(HAVE_AUDIT_SYSCALLS,, Define if audit system calls present)
-have_audit_syscalls=true
-], [
-have_audit_syscalls=false
-])
-AM_CONDITIONAL(HAVE_AUDIT_SYSCALLS, $have_audit_syscalls)
-
-AC_CONFIG_FILES([Makefile
- bin/Makefile
- bin/audit/Makefile
- bin/auditd/Makefile
- bin/auditfilterd/Makefile
- bin/auditreduce/Makefile
- bin/praudit/Makefile
- bsm/Makefile
- libbsm/Makefile
- modules/Makefile
- modules/auditfilter_noop/Makefile
- man/Makefile
- test/Makefile
- test/bsm/Makefile
- tools/Makefile])
-
-AC_OUTPUT
Copied: vendor/openbsm/1.2_alpha4/configure.ac (from rev 11163, vendor/openbsm/dist/configure.ac)
===================================================================
--- vendor/openbsm/1.2_alpha4/configure.ac (rev 0)
+++ vendor/openbsm/1.2_alpha4/configure.ac 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,263 @@
+# -*- Autoconf -*-
+# Process this file with autoconf to produce a configure script.
+
+AC_PREREQ(2.59)
+AC_INIT([OpenBSM], [1.2-alpha4], [trustedbsd-audit at TrustedBSD.org],[openbsm])
+AC_CONFIG_MACRO_DIR([m4])
+AC_CONFIG_SRCDIR([bin/auditreduce/auditreduce.c])
+AC_CONFIG_AUX_DIR(config)
+AC_CONFIG_MACRO_DIR([m4])
+AC_CONFIG_HEADER([config/config.h])
+AM_MAINTAINER_MODE
+
+# --with-native-includes forces the use of the system bsm headers.
+AC_ARG_WITH([native-includes],
+[AS_HELP_STRING([--with-native-includes],
+[Use the system native include files instead of those included with openbsm.])],
+[
+AC_DEFINE(USE_NATIVE_INCLUDES,, Define to use native include files)
+use_native_includes=true
+],
+[use_native_includes=false])
+AM_CONDITIONAL(USE_NATIVE_INCLUDES, $use_native_includes)
+
+AC_PATH_PROGS(MIG, mig)
+
+# Checks for programs.
+AC_PROG_CC
+AC_PROG_INSTALL
+AC_PROG_LEX
+AC_PROG_LIBTOOL
+AC_PROG_LN_S
+AC_PROG_YACC
+
+AM_INIT_AUTOMAKE(AC_PACKAGE_NAME, AC_PACKAGE_VERSION)
+
+AC_SEARCH_LIBS(dlsym, dl)
+AC_SEARCH_LIBS(pthread_create, pthread)
+AC_SEARCH_LIBS(clock_gettime, rt)
+AC_SEARCH_LIBS(SSL_connect, ssl)
+AC_SEARCH_LIBS(humanize_number, util)
+AC_SEARCH_LIBS(pidfile_open, util)
+
+# Checks for header files.
+AC_HEADER_STDC
+AC_HEADER_SYS_WAIT
+AC_CHECK_HEADERS([mach/mach.h stdint.h pthread_np.h printf.h])
+
+AC_DEFINE([_GNU_SOURCE],,[Use extended API on platforms that require it])
+
+# Checks for typedefs, structures, and compiler characteristics.
+AC_C_CONST
+AC_TYPE_UID_T
+AC_TYPE_PID_T
+AC_TYPE_SIZE_T
+AC_CHECK_MEMBERS([struct stat.st_rdev])
+
+AC_CHECK_MEMBER([struct ipc_perm.__key],
+[AC_DEFINE(HAVE_IPC_PERM___KEY,, Define if ipc_perm.__key instead of key)],
+[],[
+#include <sys/types.h>
+#include <sys/ipc.h>
+])
+
+AC_CHECK_MEMBER([struct ipc_perm._key],
+[AC_DEFINE(HAVE_IPC_PERM__KEY,, Define if ipc_perm._key instead of key)],
+[],[
+#include <sys/types.h>
+#include <sys/ipc.h>
+])
+
+AC_CHECK_MEMBER([struct ipc_perm.__seq],
+[AC_DEFINE(HAVE_IPC_PERM___SEQ,, Define if ipc_perm.__seq instead of seq)],
+[],[
+#include <sys/types.h>
+#include <sys/ipc.h>
+])
+
+AC_CHECK_MEMBER([struct ipc_perm._seq],
+[AC_DEFINE(HAVE_IPC_PERM__SEQ,, Define if ipc_perm._seq instead of seq)],
+[],[
+#include <sys/types.h>
+#include <sys/ipc.h>
+])
+
+AC_CHECK_MEMBER([struct sockaddr_storage.ss_len],
+[AC_DEFINE(HAVE_SOCKADDR_STORAGE_SS_LEN,, Define if sockaddr_storage.ss_len field exists)],
+[],[
+#include <sys/types.h>
+#include <sys/socket.h>
+])
+
+AC_HEADER_TIME
+AC_STRUCT_TM
+
+# Checks for library functions.
+AC_FUNC_CHOWN
+AC_FUNC_FORK
+AC_FUNC_MALLOC
+AC_FUNC_MKTIME
+AC_TYPE_SIGNAL
+AC_FUNC_STAT
+AC_FUNC_STRFTIME
+AC_CHECK_FUNCS([arc4random arc4random_buf bzero cap_enter clock_gettime closefrom faccessat fdopendir fstatat ftruncate getresgid getresuid gettimeofday inet_ntoa jail kqueue memset openat pthread_cond_timedwait_relative_np pthread_condattr_setclock pthread_mutex_lock renameat setproctitle sigtimedwait strchr strerror strlcat strlcpy strndup strrchr strstr strtol strtoul unlinkat vis])
+
+# sys/queue.h exists on most systems, but its capabilities vary a great deal.
+# test for LIST_FIRST and TAILQ_FOREACH_SAFE, which appears to not exist in
+# all of them, and are necessary for OpenBSM.
+AC_TRY_LINK([
+ #include <sys/queue.h>
+], [
+
+ #ifndef LIST_FIRST
+ #error LIST_FIRST missing
+ #endif
+ #ifndef TAILQ_FOREACH_SAFE
+ #error TAILQ_FOREACH_SAFE
+ #endif
+], [
+AC_DEFINE(HAVE_FULL_QUEUE_H,, Define if queue.h includes LIST_FIRST)
+])
+
+# Systems may not define key audit system calls, in which case libbsm cannot
+# depend on them or it will generate link-time or run-time errors. Test for
+# just one.
+AC_TRY_LINK([
+ #include <stddef.h>
+
+ extern int auditon(int, void *, int);
+], [
+ int err;
+
+ err = auditon(0, NULL, 0);
+], [
+AC_DEFINE(HAVE_AUDIT_SYSCALLS,, Define if audit system calls present)
+have_audit_syscalls=true
+], [
+have_audit_syscalls=false
+])
+AM_CONDITIONAL(HAVE_AUDIT_SYSCALLS, $have_audit_syscalls)
+
+#
+# We rely on the BSD be32toh() and be32enc()-style endian macros to perform
+# byte order conversions. Availability of these varies considerably -- in
+# general, a system might have neither, be32toh(), or be32toh() and be32enc().
+# There is also variation in which headers are even present, and whether they
+# are macros or functions. Try to organise the world into some simpler cases.
+# The following macros may be set at the end:
+#
+# USE_ENDIAN_H
+# USE_SYS_ENDIAN_H
+# USE_MACHINE_ENDIAN_H
+# USE_COMPAT_ENDIAN_H
+# USE_COMPAT_ENDIAN_ENC_H
+#
+# First, decide which system endian.h to use.
+#
+AC_CHECK_HEADERS([endian.h], [
+ have_endian_h=yes
+], [
+ have_endian_h=no
+])
+
+AC_CHECK_HEADERS([sys/endian.h], [
+ have_sys_endian_h=yes
+], [
+ have_sys_endian_h=no
+])
+
+AC_CHECK_HEADERS([machine/endian.h], [
+ have_machine_endian_h=yes
+], [
+ have_machine_endian_h=no
+])
+
+if test $have_endian_h = yes; then
+ AC_DEFINE(USE_ENDIAN_H,, Define if endian.h should be included)
+elif test $have_sys_endian_h = yes; then
+ AC_DEFINE(USE_SYS_ENDIAN_H,, Define if sys/endian.h should be included)
+elif test $have_machine_endian_h = yes; then
+ AC_DEFINE(USE_MACHINE_ENDIAN_H,, Define if machine/endian.h should be included)
+else
+ AC_MSG_ERROR([no endian.h])
+fi
+
+#
+# Next, decide if we need to supplement with compat headers.
+#
+AC_TRY_LINK([
+ #ifdef USE_ENDIAN_H
+ #include <endian.h>
+ #endif
+ #ifdef USE_SYS_ENDIAN_H
+ #include <sys/endian.h>
+ #endif
+ #ifdef USE_MACHINE_ENDIAN_H
+ #include <machine/endian.h>
+ #endif
+], [
+ (void)be32toh(0);
+], [], [
+ AC_DEFINE(USE_COMPAT_ENDIAN_H,, Define if compat/endian.h is required)
+ AC_MSG_RESULT([using compat/endian.h])
+])
+
+AC_TRY_LINK([
+ #ifdef USE_ENDIAN_H
+ #include <endian.h>
+ #endif
+ #ifdef USE_SYS_ENDIAN_H
+ #include <sys/endian.h>
+ #endif
+ #ifdef USE_MACHINE_ENDIAN_H
+ #include <machine/endian.h>
+ #endif
+ #ifdef USE_COMPAT_ENDIAN_H
+ #include "compat/endian.h"
+ #endif
+ #include <stdlib.h>
+], [
+ int i;
+
+ i = bswap16(0);
+ i = bswap32(0);
+ i = bswap64(0);
+ be32enc(NULL, 0);
+ i = htole64(0);
+ i = le64toh(0);
+], [], [
+ AC_DEFINE(USE_COMPAT_ENDIAN_ENC_H,, Define if compat/endian_enc.h is required)
+ AC_MSG_RESULT([using compat/endian_enc.h])
+])
+
+# Check to see if Mach IPC is used for trigger messages. If so, use Mach IPC
+# instead of the default for sending trigger messages to the audit components.
+AC_CHECK_FILE([/usr/include/mach/audit_triggers.defs], [
+AC_DEFINE(USE_MACH_IPC,, Define if uses Mach IPC for Triggers messages)
+use_mach_ipc=true
+], [
+use_mach_ipc=false
+])
+AM_CONDITIONAL(USE_MACH_IPC, $use_mach_ipc)
+
+AC_CONFIG_FILES([Makefile
+ bin/Makefile
+ bin/audit/Makefile
+ bin/auditd/Makefile
+ bin/auditdistd/Makefile
+ bin/auditfilterd/Makefile
+ bin/auditreduce/Makefile
+ bin/praudit/Makefile
+ bsm/Makefile
+ libauditd/Makefile
+ libbsm/Makefile
+ modules/Makefile
+ modules/auditfilter_noop/Makefile
+ man/Makefile
+ sys/Makefile
+ sys/bsm/Makefile
+ test/Makefile
+ test/bsm/Makefile
+ tools/Makefile])
+
+AC_OUTPUT
Deleted: vendor/openbsm/1.2_alpha4/etc/audit_class
===================================================================
--- vendor/openbsm/dist/etc/audit_class 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/etc/audit_class 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,23 +0,0 @@
-#
-# $P4: //depot/projects/trustedbsd/openbsm/etc/audit_class#5 $
-# $FreeBSD: src/contrib/openbsm/etc/audit_class,v 1.2.4.1 2007/11/04 12:49:59 rwatson Exp $
-#
-0x00000000:no:invalid class
-0x00000001:fr:file read
-0x00000002:fw:file write
-0x00000004:fa:file attribute access
-0x00000008:fm:file attribute modify
-0x00000010:fc:file create
-0x00000020:fd:file delete
-0x00000040:cl:file close
-0x00000080:pc:process
-0x00000100:nt:network
-0x00000200:ip:ipc
-0x00000400:na:non attributable
-0x00000800:ad:administrative
-0x00001000:lo:login_logout
-0x00004000:ap:application
-0x20000000:io:ioctl
-0x40000000:ex:exec
-0x80000000:ot:miscellaneous
-0xffffffff:all:all flags set
Copied: vendor/openbsm/1.2_alpha4/etc/audit_class (from rev 11163, vendor/openbsm/dist/etc/audit_class)
===================================================================
--- vendor/openbsm/1.2_alpha4/etc/audit_class (rev 0)
+++ vendor/openbsm/1.2_alpha4/etc/audit_class 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,23 @@
+#
+# $FreeBSD: stable/10/contrib/openbsm/etc/audit_class 293161 2016-01-04 16:32:21Z brueffer $
+#
+0x00000000:no:invalid class
+0x00000001:fr:file read
+0x00000002:fw:file write
+0x00000004:fa:file attribute access
+0x00000008:fm:file attribute modify
+0x00000010:fc:file create
+0x00000020:fd:file delete
+0x00000040:cl:file close
+0x00000080:pc:process
+0x00000100:nt:network
+0x00000200:ip:ipc
+0x00000400:na:non attributable
+0x00000800:ad:administrative
+0x00001000:lo:login_logout
+0x00002000:aa:authentication and authorization
+0x00004000:ap:application
+0x20000000:io:ioctl
+0x40000000:ex:exec
+0x80000000:ot:miscellaneous
+0xffffffff:all:all flags set
Deleted: vendor/openbsm/1.2_alpha4/etc/audit_control
===================================================================
--- vendor/openbsm/dist/etc/audit_control 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/etc/audit_control 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,10 +0,0 @@
-#
-# $P4: //depot/projects/trustedbsd/openbsm/etc/audit_control#5 $
-# $FreeBSD: src/contrib/openbsm/etc/audit_control,v 1.4 2006/09/25 11:53:06 rwatson Exp $
-#
-dir:/var/audit
-flags:lo
-minfree:20
-naflags:lo
-policy:cnt
-filesz:0
Copied: vendor/openbsm/1.2_alpha4/etc/audit_control (from rev 11163, vendor/openbsm/dist/etc/audit_control)
===================================================================
--- vendor/openbsm/1.2_alpha4/etc/audit_control (rev 0)
+++ vendor/openbsm/1.2_alpha4/etc/audit_control 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,11 @@
+#
+# $FreeBSD: stable/10/contrib/openbsm/etc/audit_control 293161 2016-01-04 16:32:21Z brueffer $
+#
+dir:/var/audit
+dist:off
+flags:lo,aa
+minfree:5
+naflags:lo,aa
+policy:cnt,argv
+filesz:2M
+expire-after:10M
Deleted: vendor/openbsm/1.2_alpha4/etc/audit_event
===================================================================
--- vendor/openbsm/dist/etc/audit_event 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/etc/audit_event 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,529 +0,0 @@
-#
-# $P4: //depot/projects/trustedbsd/openbsm/etc/audit_event#26 $
-# $FreeBSD: src/contrib/openbsm/etc/audit_event,v 1.8.2.1 2007/11/04 12:49:59 rwatson Exp $
-#
-# The mapping between event identifiers and values is also hard-codedd in
-# audit_kevents.h and audit_uevents.h, so changes must occur in both places,
-# and programs, such as the kernel, may need to be recompiled to recognize
-# those changes. It is advisable not to change the numbering or naming of
-# kernel audit events.
-#
-0:AUE_NULL:indir system call:no
-1:AUE_EXIT:exit(2):pc
-2:AUE_FORK:fork(2):pc
-3:AUE_OPEN:open(2) - attr only:fa
-4:AUE_CREAT:creat(2):fc
-5:AUE_LINK:link(2):fc
-6:AUE_UNLINK:unlink(2):fd
-7:AUE_EXEC:exec(2):pc,ex
-8:AUE_CHDIR:chdir(2):pc
-9:AUE_MKNOD:mknod(2):fc
-10:AUE_CHMOD:chmod(2):fm
-11:AUE_CHOWN:chown(2):fm
-12:AUE_UMOUNT:umount(2) - old version:ad
-13:AUE_JUNK:junk:no
-14:AUE_ACCESS:access(2):fa
-15:AUE_KILL:kill(2):pc
-16:AUE_STAT:stat(2):fa
-17:AUE_LSTAT:lstat(2):fa
-18:AUE_ACCT:acct(2):ad
-19:AUE_MCTL:mctl(2):no
-20:AUE_REBOOT:reboot(2):ad
-21:AUE_SYMLINK:symlink(2):fc
-22:AUE_READLINK:readlink(2):fr
-23:AUE_EXECVE:execve(2):pc,ex
-24:AUE_CHROOT:chroot(2):pc
-25:AUE_VFORK:vfork(2):pc
-26:AUE_SETGROUPS:setgroups(2):pc
-27:AUE_SETPGRP:setpgrp(2):pc
-28:AUE_SWAPON:swapon(2):ad
-29:AUE_SETHOSTNAME:sethostname(2):ad
-30:AUE_FCNTL:fcntl(2):fm
-31:AUE_SETPRIORITY:setpriority(2):pc
-32:AUE_CONNECT:connect(2):nt
-33:AUE_ACCEPT:accept(2):nt
-34:AUE_BIND:bind(2):nt
-35:AUE_SETSOCKOPT:setsockopt(2):nt
-36:AUE_VTRACE:vtrace(2):pc
-37:AUE_SETTIMEOFDAY:settimeofday(2):ad
-38:AUE_FCHOWN:fchown(2):fm
-39:AUE_FCHMOD:fchmod(2):fm
-40:AUE_SETREUID:setreuid(2):pc
-41:AUE_SETREGID:setregid(2):pc
-42:AUE_RENAME:rename(2):fc,fd
-43:AUE_TRUNCATE:truncate(2):fw
-44:AUE_FTRUNCATE:ftruncate(2):fw
-45:AUE_FLOCK:flock(2):fm
-46:AUE_SHUTDOWN:shutdown(2):nt
-47:AUE_MKDIR:mkdir(2):fc
-48:AUE_RMDIR:rmdir(2):fd
-49:AUE_UTIMES:utimes(2):fm
-50:AUE_ADJTIME:adjtime(2):ad
-51:AUE_SETRLIMIT:setrlimit(2):pc
-52:AUE_KILLPG:killpg(2):pc
-53:AUE_NFS_SVC:nfs_svc(2):ad
-54:AUE_STATFS:statfs(2):fa
-55:AUE_FSTATFS:fstatfs(2):fa
-56:AUE_UNMOUNT:unmount(2):ad
-57:AUE_ASYNC_DAEMON:async_daemon(2):ad
-58:AUE_NFS_GETFH:nfs_getfh(2):ad
-59:AUE_SETDOMAINNAME:setdomainname(2):ad
-60:AUE_QUOTACTL:quotactl(2):ad
-61:AUE_EXPORTFS:exportfs(2):ad
-62:AUE_MOUNT:mount(2):ad
-63:AUE_SEMSYS:semsys(2):ip
-64:AUE_MSGSYS:msgsys(2):ip
-65:AUE_SHMSYS:shmsys(2):ip
-66:AUE_BSMSYS:bsmsys(2):ad
-67:AUE_RFSSYS:rfssys(2):ad
-68:AUE_FCHDIR:fchdir(2):pc
-69:AUE_FCHROOT:fchroot(2):pc
-70:AUE_VPIXSYS:vpixsys(2):no
-71:AUE_PATHCONF:pathconf(2):fa
-72:AUE_OPEN_R:open(2) - read:fr
-73:AUE_OPEN_RC:open(2) - read,creat:fc,fr,fa,fm
-74:AUE_OPEN_RT:open(2) - read,trunc:fd,fr,fa,fm
-75:AUE_OPEN_RTC:open(2) - read,creat,trunc:fc,fd,fr,fa,fm
-76:AUE_OPEN_W:open(2) - write:fw
-77:AUE_OPEN_WC:open(2) - write,creat:fc,fw,fa,fm
-78:AUE_OPEN_WT:open(2) - write,trunc:fd,fw,fa,fm
-79:AUE_OPEN_WTC:open(2) - write,creat,trunc:fc,fd,fw,fa,fm
-80:AUE_OPEN_RW:open(2) - read,write:fr,fw
-81:AUE_OPEN_RWC:open(2) - read,write,creat:fc,fw,fr,fa,fm
-82:AUE_OPEN_RWT:open(2) - read,write,trunc:fd,fr,fw,fa,fm
-83:AUE_OPEN_RWTC:open(2) - read,write,creat,trunc:fc,fd,fw,fr,fa,fm
-84:AUE_MSGCTL:msgctl(2) - illegal command:ip
-85:AUE_MSGCTL_RMID:msgctl(2) - IPC_RMID command:ip
-86:AUE_MSGCTL_SET:msgctl(2) - IPC_SET command:ip
-87:AUE_MSGCTL_STAT:msgctl(2) - IPC_STAT command:ip
-88:AUE_MSGGET:msgget(2):ip
-89:AUE_MSGRCV:msgrcv(2):ip
-90:AUE_MSGSND:msgsnd(2):ip
-91:AUE_SHMCTL:shmctl(2) - illegal command:ip
-92:AUE_SHMCTL_RMID:shmctl(2) - IPC_RMID command:ip
-93:AUE_SHMCTL_SET:shmctl(2) - IPC_SET command:ip
-94:AUE_SHMCTL_STAT:shmctl(2) - IPC_STAT command:ip
-95:AUE_SHMGET:shmget(2):ip
-96:AUE_SHMAT:shmat(2):ip
-97:AUE_SHMDT:shmdt(2):ip
-98:AUE_SEMCTL:semctl(2) - illegal command:ip
-99:AUE_SEMCTL_RMID:semctl(2) - IPC_RMID command:ip
-100:AUE_SEMCTL_SET:semctl(2) - IPC_SET command:ip
-101:AUE_SEMCTL_STAT:semctl(2) - IPC_STAT command:ip
-102:AUE_SEMCTL_GETNCNT:semctl(2) - GETNCNT command:ip
-103:AUE_SEMCTL_GETPID:semctl(2) - GETPID command:ip
-104:AUE_SEMCTL_GETVAL:semctl(2) - GETVAL command:ip
-105:AUE_SEMCTL_GETALL:semctl(2) - GETALL command:ip
-106:AUE_SEMCTL_GETZCNT:semctl(2) - GETZCNT command:ip
-107:AUE_SEMCTL_SETVAL:semctl(2) - SETVAL command:ip
-108:AUE_SEMCTL_SETALL:semctl(2) - SETALL command:ip
-109:AUE_SEMGET:semget(2):ip
-110:AUE_SEMOP:semop(2):ip
-111:AUE_CORE:process dumped core:fc
-112:AUE_CLOSE:close(2):cl
-113:AUE_SYSTEMBOOT:system booted:na
-114:AUE_ASYNC_DAEMON_EXIT:async_daemon(2) exited:ad
-115:AUE_NFSSVC_EXIT:nfssvc(2) exited:ad
-128:AUE_WRITEL:writel(2):no
-129:AUE_WRITEVL:writevl(2):no
-130:AUE_GETAUID:getauid(2):ad
-131:AUE_SETAUID:setauid(2):ad
-132:AUE_GETAUDIT:getaudit(2):ad
-133:AUE_SETAUDIT:setaudit(2):ad
-134:AUE_GETUSERAUDIT:getuseraudit(2):ad
-135:AUE_SETUSERAUDIT:setuseraudit(2):ad
-136:AUE_AUDITSVC:auditsvc(2):ad
-137:AUE_AUDITUSER:audituser(2):ad
-138:AUE_AUDITON:auditon(2):ad
-139:AUE_AUDITON_GTERMID:auditon(2) - GETTERMID command:ad
-140:AUE_AUDITON_STERMID:auditon(2) - SETTERMID command:ad
-141:AUE_AUDITON_GPOLICY:auditon(2) - GPOLICY command:ad
-142:AUE_AUDITON_SPOLICY:auditon(2) - SPOLICY command:ad
-143:AUE_AUDITON_GESTATE:auditon(2) - GESTATE command:ad
-144:AUE_AUDITON_SESTATE:auditon(2) - SESTATE command:ad
-145:AUE_AUDITON_GQCTRL:auditon(2) - GQCTRL command:ad
-146:AUE_AUDITON_SQCTRL:auditon(2) - SQCTRL command:ad
-147:AUE_GETKERNSTATE:getkernstate(2):ad
-148:AUE_SETKERNSTATE:setkernstate(2):ad
-149:AUE_GETPORTAUDIT:getportaudit(2):ad
-150:AUE_AUDITSTAT:auditstat(2):ad
-151:AUE_REVOKE:revoke(2):cl
-152:AUE_MAC:Solaris AUE_MAC:no
-153:AUE_ENTERPROM:enter prom:ad
-154:AUE_EXITPROM:exit prom:ad
-155:AUE_IFLOAT:Solaris AUE_IFLOAT:no
-156:AUE_PFLOAT:Solaris AUE_PFLOAT:no
-157:AUE_UPRIV:Solaris AUE_UPRIV:no
-158:AUE_IOCTL:ioctl(2):io
-173:AUE_ONESIDE:one-sided session record:nt
-174:AUE_MSGGETL:msggetl(2):ip
-175:AUE_MSGRCVL:msgrcvl(2):ip
-176:AUE_MSGSNDL:msgsndl(2):ip
-177:AUE_SEMGETL:semgetl(2):ip
-178:AUE_SHMGETL:shmgetl(2):ip
-183:AUE_SOCKET:socket(2):nt
-184:AUE_SENDTO:sendto(2):nt
-185:AUE_PIPE:pipe(2):ip
-186:AUE_SOCKETPAIR:socketpair(2):nt
-187:AUE_SEND:send(2):nt
-188:AUE_SENDMSG:sendmsg(2):nt
-189:AUE_RECV:recv(2):nt
-190:AUE_RECVMSG:recvmsg(2):nt
-191:AUE_RECVFROM:recvfrom(2):nt
-192:AUE_READ:read(2):no
-193:AUE_GETDENTS:getdents(2):no
-194:AUE_LSEEK:lseek(2):no
-195:AUE_WRITE:write(2):no
-196:AUE_WRITEV:writev(2):no
-197:AUE_NFS:nfs server:ad
-198:AUE_READV:readv(2):no
-199:AUE_OSTAT:Solaris old stat(2):fa
-200:AUE_SETUID:setuid(2):pc
-201:AUE_STIME:old stime(2):ad
-202:AUE_UTIME:old utime(2):fm
-203:AUE_NICE:old nice(2):pc
-204:AUE_OSETPGRP:Solaris old setpgrp(2):pc
-205:AUE_SETGID:setgid(2):pc
-206:AUE_READL:readl(2):no
-207:AUE_READVL:readvl(2):no
-209:AUE_DUP2:dup2(2):no
-210:AUE_MMAP:mmap(2):no
-211:AUE_AUDIT:audit(2):ot
-212:AUE_PRIOCNTLSYS:Solaris priocntlsys(2):pc
-213:AUE_MUNMAP:munmap(2):cl
-214:AUE_SETEGID:setegid(2):pc
-215:AUE_SETEUID:seteuid(2):pc
-216:AUE_PUTMSG:putmsg(2):nt
-217:AUE_GETMSG:getmsg(2):nt
-218:AUE_PUTPMSG:putpmsg(2):nt
-219:AUE_GETPMSG:getpmsg(2):nt
-220:AUE_AUDITSYS:audit system calls place holder:no
-221:AUE_AUDITON_GETKMASK:auditon(2) - get kernel mask:ad
-222:AUE_AUDITON_SETKMASK:auditon(2) - set kernel mask:ad
-223:AUE_AUDITON_GETCWD:auditon(2) - get cwd:ad
-224:AUE_AUDITON_GETCAR:auditon(2) - get car:ad
-225:AUE_AUDITON_GETSTAT:auditon(2) - get audit statistics:ad
-226:AUE_AUDITON_SETSTAT:auditon(2) - reset audit statistics:ad
-227:AUE_AUDITON_SETUMASK:auditon(2) - set mask per uid:ad
-228:AUE_AUDITON_SETSMASK:auditon(2) - set mask per session ID:ad
-229:AUE_AUDITON_GETCOND:auditon(2) - get audit state:ad
-230:AUE_AUDITON_SETCOND:auditon(2) - set audit state:ad
-231:AUE_AUDITON_GETCLASS:auditon(2) - get event class:ad
-232:AUE_AUDITON_SETCLASS:auditon(2) - set event class:ad
-233:AUE_UTSSYS:utssys(2) - fusers:ad
-234:AUE_STATVFS:statvfs(2):fa
-235:AUE_XSTAT:xstat(2):fa
-236:AUE_LXSTAT:lxstat(2):fa
-237:AUE_LCHOWN:lchown(2):fm
-238:AUE_MEMCNTL:memcntl(2):ot
-239:AUE_SYSINFO:sysinfo(2):ad
-240:AUE_XMKNOD:xmknod(2):fc
-241:AUE_FORK1:fork1(2):pc
-242:AUE_MODCTL:modctl(2) system call place holder:no
-243:AUE_MODLOAD:modctl(2) - load module:ad
-244:AUE_MODUNLOAD:modctl(2) - unload module:ad
-245:AUE_MODCONFIG:modctl(2) - configure module:ad
-246:AUE_MODADDMAJ:modctl(2) - bind module:ad
-247:AUE_SOCKACCEPT:getmsg-accept:nt
-248:AUE_SOCKCONNECT:putmsg-connect:nt
-249:AUE_SOCKSEND:putmsg-send:nt
-250:AUE_SOCKRECEIVE:getmsg-receive:nt
-251:AUE_ACLSET:acl(2) - SETACL comand:fm
-252:AUE_FACLSET:facl(2) - SETACL command:fm
-253:AUE_DOORFS:doorfs(2) - system call place holder:no
-254:AUE_DOORFS_DOOR_CALL:doorfs(2) - DOOR_CALL:ip
-255:AUE_DOORFS_DOOR_RETURN:doorfs(2) - DOOR_RETURN:ip
-256:AUE_DOORFS_DOOR_CREATE:doorfs(2) - DOOR_CREATE:ip
-257:AUE_DOORFS_DOOR_REVOKE:doorfs(2) - DOOR_REVOKE:ip
-258:AUE_DOORFS_DOOR_INFO:doorfs(2) - DOOR_INFO:ip
-259:AUE_DOORFS_DOOR_CRED:doorfs(2) - DOOR_CRED:ip
-260:AUE_DOORFS_DOOR_BIND:doorfs(2) - DOOR_BIND:ip
-261:AUE_DOORFS_DOOR_UNBIND:doorfs(2) - DOOR_UNBIND:ip
-262:AUE_P_ONLINE:p_online(2):ad
-263:AUE_PROCESSOR_BIND:processor_bind(2):ad
-264:AUE_INST_SYNC:inst_sync(2):ad
-265:AUE_SOCKCONFIG:configure socket:nt
-266:AUE_SETAUDIT_ADDR:setaudit_addr(2):ad
-267:AUE_GETAUDIT_ADDR:getaudit_addr(2):ad
-268:AUE_UMOUNT2:Solaris umount(2):ad
-269:AUE_FSAT:fsat(2) - place holder:no
-270:AUE_OPENAT_R:openat(2) - read:fr
-271:AUE_OPENAT_RC:openat(2) - read,creat:fc,fr,fa,fm
-272:AUE_OPENAT_RT:openat(2) - read,trunc:fd,fr,fa,fm
-273:AUE_OPENAT_RTC:openat(2) - read,creat,trunc:fc,fd,fr,fa,fm
-274:AUE_OPENAT_W:openat(2) - write:fw
-275:AUE_OPENAT_WC:openat(2) - write,creat:fc,fw,fa,fm
-276:AUE_OPENAT_WT:openat(2) - write,trunc:fd,fw,fa,fm
-277:AUE_OPENAT_WTC:openat(2) - write,creat,trunc:fc,fd,fw,fa,fm
-278:AUE_OPENAT_RW:openat(2) - read,write:fr,fw
-279:AUE_OPENAT_RWC:openat(2) - read,write,create:fc,fw,fr,fa,fm
-280:AUE_OPENAT_RWTC:openat(2) - read,write,creat,trunc:fc,fd,fw,fr,fa,fm
-282:AUE_RENAMEAT:renameat(2):fc,fd
-283:AUE_FSTATAT:fstatat(2):fa
-284:AUE_FCHOWNAT:fchownat(2):fm
-285:AUE_FUTIMESAT:futimesat(2):fm
-286:AUE_UNLINKAT:unlinkat(2):fd
-287:AUE_CLOCK_SETTIME:clock_settime(2):ad
-288:AUE_NTP_ADJTIME:ntp_adjtime(2):ad
-289:AUE_SETPPRIV:setppriv(2):pc
-290:AUE_MODDEVPLCY:modctl(2) - configure device policy:ad
-291:AUE_MODADDPRIV:modctl(2) - configure additional privilege:ad
-292:AUE_CRYPTOADM:kernel cryptographic framework:ad
-293:AUE_CONFIGKSSL:configure kernel SSL:ad
-294:AUE_BRANDSYS:brandsys(2):ot
-295:AUE_PF_POLICY_ADDRULE:Add IPsec policy rule:ad
-296:AUE_PF_POLICY_DELRULE:Delete IPsec policy rule:ad
-297:AUE_PF_POLICY_CLONE:Clone IPsec policy:ad
-298:AUE_PF_POLICY_FLIP:Flip IPsec policy:ad
-299:AUE_PF_POLICY_FLUSH:Flush IPsec policy rules:ad
-300:AUE_PF_POLICY_ALGS:Update IPsec algorithms:ad
-#
-# What follows are deprecated Darwin event numbers that may soon conflict
-# with Solaris events.
-#
-301:AUE_DARWIN_GETFSSTAT:getfsstat(2):fa
-302:AUE_DARWIN_PTRACE:ptrace(2):pc
-303:AUE_DARWIN_CHFLAGS:chflags(2):fm
-304:AUE_DARWIN_FCHFLAGS:fchflags(2):fm
-305:AUE_DARWIN_PROFILE:profil(2):pc
-306:AUE_DARWIN_KTRACE:ktrace(2):pc
-307:AUE_DARWIN_SETLOGIN:setlogin(2):pc
-308:AUE_DARWIN_REBOOT:reboot(2):ad
-309:AUE_DARWIN_REVOKE:revoke(2):cl
-310:AUE_DARWIN_UMASK:umask(2):pc
-311:AUE_DARWIN_MPROTECT:mprotect(2):fm
-312:AUE_DARWIN_SETPRIORITY:setpriority(2):pc,ot
-313:AUE_DARWIN_SETTIMEOFDAY:settimeofday(2):ad
-314:AUE_DARWIN_FLOCK:flock(2):fm
-315:AUE_DARWIN_MKFIFO:mkfifo(2):fc
-316:AUE_DARWIN_POLL:poll(2):no
-317:AUE_DARWIN_SOCKETPAIR:socketpair(2):nt
-318:AUE_DARWIN_FUTIMES:futimes(2):fm
-319:AUE_DARWIN_SETSID:setsid(2):pc
-320:AUE_DARWIN_SETPRIVEXEC:setprivexec(2):pc
-321:AUE_DARWIN_NFSSVC:nfssvc(2):ad
-322:AUE_DARWIN_GETFH:getfh(2):fa
-323:AUE_DARWIN_QUOTACTL:quotactl(2):ad
-324:AUE_DARWIN_ADDPROFILE:system call:pc
-325:AUE_DARWIN_KDEBUGTRACE:system call:pc
-326:AUE_DARWIN_FSTAT:fstat(2):fa
-327:AUE_DARWIN_FPATHCONF:fpathconf(2):fa
-328:AUE_DARWIN_GETDIRENTRIES:getdirentries(2):no
-329:AUE_DARWIN_TRUNCATE:truncate(2):fw
-330:AUE_DARWIN_FTRUNCATE:ftruncate(2):fw
-331:AUE_DARWIN_SYSCTL:sysctl(3):ad
-332:AUE_DARWIN_MLOCK:mlock(2):pc
-333:AUE_DARWIN_MUNLOCK:munlock(2):pc
-334:AUE_DARWIN_UNDELETE:undelete(2):fm
-335:AUE_DARWIN_GETATTRLIST:getattrlist():fa
-336:AUE_DARWIN_SETATTRLIST:setattrlist():fm
-337:AUE_DARWIN_GETDIRENTRIESATTR:getdirentriesattr():fa
-338:AUE_DARWIN_EXCHANGEDATA:exchangedata():fw
-339:AUE_DARWIN_SEARCHFS:searchfs():fa
-340:AUE_DARWIN_MINHERIT:minherit(2):pc
-341:AUE_DARWIN_SEMCONFIG:semconfig():ip
-342:AUE_DARWIN_SEMOPEN:sem_open(2):ip
-343:AUE_DARWIN_SEMCLOSE:sem_close(2):ip
-344:AUE_DARWIN_SEMUNLINK:sem_unlink(2):ip
-345:AUE_DARWIN_SHMOPEN:shm_open(2):ip
-346:AUE_DARWIN_SHMUNLINK:shm_unlink(2):ip
-347:AUE_DARWIN_LOADSHFILE:load_shared_file():fr
-348:AUE_DARWIN_RESETSHFILE:reset_shared_file():ot
-349:AUE_DARWIN_NEWSYSTEMSHREG:new_system_share_regions():ot
-350:AUE_DARWIN_PTHREADKILL:pthread_kill(2):pc
-351:AUE_DARWIN_PTHREADSIGMASK:pthread_sigmask(2):pc
-352:AUE_DARWIN_AUDITCTL:auditctl(2):ad
-353:AUE_DARWIN_RFORK:rfork(2):pc
-354:AUE_DARWIN_LCHMOD:lchmod(2):fm
-355:AUE_DARWIN_SWAPOFF:swapoff(2):ad
-356:AUE_DARWIN_INITPROCESS:init_process():pc
-357:AUE_DARWIN_MAPFD:map_fd():fa
-358:AUE_DARWIN_TASKFORPID:task_for_pid():pc
-359:AUE_DARWIN_PIDFORTASK:pid_for_task():pc
-360:AUE_DARWIN_SYSCTL_NONADMIN:sysctl() - non-admin:ot
-361:AUE_DARWIN_COPYFILE:copyfile():fr,fw
-#
-# OpenBSM-specific kernel events.
-#
-43001:AUE_GETFSSTAT:getfsstat(2):fa
-43002:AUE_PTRACE:ptrace(2):pc
-43003:AUE_CHFLAGS:chflags(2):fm
-43004:AUE_FCHFLAGS:fchflags(2):fm
-43005:AUE_PROFILE:profil(2):pc
-43006:AUE_KTRACE:ktrace(2):pc
-43007:AUE_SETLOGIN:setlogin(2):pc
-43008:AUE_OPENBSM_REVOKE:revoke(2):cl
-43009:AUE_UMASK:umask(2):pc
-43010:AUE_MPROTECT:mprotect(2):fm
-43011:AUE_MKFIFO:mkfifo(2):fc
-43012:AUE_POLL:poll(2):no
-43013:AUE_FUTIMES:futimes(2):fm
-43014:AUE_SETSID:setsid(2):pc
-43015:AUE_SETPRIVEXEC:setprivexec(2):pc
-43016:AUE_ADDPROFILE:system call:pc
-43017:AUE_KDEBUGTRACE:system call:pc
-43018:AUE_OPENBSM_FSTAT:fstat(2):fa
-43019:AUE_FPATHCONF:fpathconf(2):fa
-43020:AUE_GETDIRENTRIES:getdirentries(2):no
-43021:AUE_SYSCTL:sysctl(3):ot
-43022:AUE_MLOCK:mlock(2):pc
-43023:AUE_MUNLOCK:munlock(2):pc
-43024:AUE_UNDELETE:undelete(2):fm
-43025:AUE_GETATTRLIST:getattrlist():fa
-43026:AUE_SETATTRLIST:setattrlist():fm
-43027:AUE_GETDIRENTRIESATTR:getdirentriesattr():fa
-43028:AUE_EXCHANGEDATA:exchangedata():fw
-43029:AUE_SEARCHFS:searchfs():fa
-43030:AUE_MINHERIT:minherit(2):pc
-43031:AUE_SEMCONFIG:semconfig():ip
-43032:AUE_SEMOPEN:sem_open(2):ip
-43033:AUE_SEMCLOSE:sem_close(2):ip
-43034:AUE_SEMUNLINK:sem_unlink(2):ip
-43035:AUE_SHMOPEN:shm_open(2):ip
-43036:AUE_SHMUNLINK:shm_unlink(2):ip
-43037:AUE_LOADSHFILE:load_shared_file():fr
-43038:AUE_RESETSHFILE:reset_shared_file():ot
-43039:AUE_NEWSYSTEMSHREG:new_system_share_regions():ot
-43040:AUE_PTHREADKILL:pthread_kill(2):pc
-43041:AUE_PTHREADSIGMASK:pthread_sigmask(2):pc
-43042:AUE_AUDITCTL:auditctl(2):ad
-43043:AUE_RFORK:rfork(2):pc
-43044:AUE_LCHMOD:lchmod(2):fm
-43045:AUE_SWAPOFF:swapoff(2):ad
-43046:AUE_INITPROCESS:init_process():pc
-43047:AUE_MAPFD:map_fd():fa
-43048:AUE_TASKFORPID:task_for_pid():pc
-43049:AUE_PIDFORTASK:pid_for_task():pc
-43050:AUE_SYSCTL_NONADMIN:sysctl() - non-admin:ot
-43051:AUE_COPYFILE:copyfile(2):fr,fw
-43052:AUE_LUTIMES:lutimes(2):fm
-43053:AUE_LCHFLAGS:lchflags(2):fm
-43054:AUE_SENDFILE:sendfile(2):nt
-43055:AUE_USELIB:uselib(2):fa
-43056:AUE_GETRESUID:getresuid(2):pc
-43057:AUE_SETRESUID:setresuid(2):pc
-43058:AUE_GETRESGID:getresgid(2):pc
-43059:AUE_SETRESGID:setresgid(2):pc
-43060:AUE_WAIT4:wait4(2):pc
-43061:AUE_LGETFH:lgetfh(2):fa
-43062:AUE_FHSTATFS:fhstatfs(2):fa
-43063:AUE_FHOPEN:fhopen(2):fa
-43064:AUE_FHSTAT:fhstat(2):fa
-43065:AUE_JAIL:jail(2):pc
-43066:AUE_EACCESS:eaccess(2):fa
-43067:AUE_KQUEUE:kqueue(2):no
-43068:AUE_KEVENT:kevent(2):no
-43069:AUE_FSYNC:fsync(2):fm
-43070:AUE_NMOUNT:nmount(2):ad
-43071:AUE_BDFLUSH:bdflush(2):ad
-43072:AUE_SETFSUID:setfsuid(2):ot
-43073:AUE_SETFSGID:setfsgid(2):ot
-43074:AUE_PERSONALITY:personality(2):pc
-43075:AUE_SCHED_GETSCHEDULER:getscheduler(2):ad
-43076:AUE_SCHED_SETSCHEDULER:setscheduler(2):ad
-43077:AUE_PRCTL:prctl(2):pc
-43078:AUE_GETCWD:getcwd(2):pc
-43079:AUE_CAPGET:capget(2):pc
-43080:AUE_CAPSET:capset(2):pc
-43081:AUE_PIVOT_ROOT:pivot_root(2):pc
-43082:AUE_RTPRIO::rtprio(2):pc
-43083:AUE_SCHED_GETPARAM:sched_getparam(2):ad
-43084:AUE_SCHED_SETPARAM:sched_setparam(2):ad
-43085:AUE_SCHED_GET_PRIORITY_MAX:sched_get_priority_max(2):ad
-43086:AUE_SCHED_GET_PRIORITY_MIN:sched_get_priority_min(2):ad
-43087:AUE_SCHED_RR_GET_INTERVAL:sched_rr_get_interval(2):ad
-43088:AUE_ACL_GET_FILE:acl_get_file(2):fa
-43089:AUE_ACL_SET_FILE:acl_set_file(2):fm
-43090:AUE_ACL_GET_FD:acl_get_fd(2):fa
-43091:AUE_ACL_SET_FD:acl_set_fd(2):fm
-43092:AUE_ACL_DELETE_FILE:acl_delete_file(2):fm
-43093:AUE_ACL_DELETE_FD:acl_delete_fd(2):fm
-43094:AUE_ACL_CHECK_FILE:acl_aclcheck_file(2):fa
-43095:AUE_ACL_CHECK_FD:acl_aclcheck_fd(2):fa
-43096:AUE_ACL_GET_LINK:acl_get_link(2):fa
-43097:AUE_ACL_SET_LINK:acl_set_link(2):fm
-43098:AUE_ACL_DELETE_LINK:acl_delete_link(2):fm
-43099:AUE_ACL_CHECK_LINK:acl_aclcheck_link(2):fa
-43100:AUE_SYSARCH:sysarch(2):ot
-43101:AUE_EXTATTRCTL:extattrctl(2):fm
-43102:AUE_EXTATTR_GET_FILE:extattr_get_file(2):fa
-43103:AUE_EXTATTR_SET_FILE:extattr_set_file(2):fm
-43104:AUE_EXTATTR_LIST_FILE:extattr_list_file(2):fa
-43105:AUE_EXTATTR_DELETE_FILE:extattr_delete_file(2):fm
-43106:AUE_EXTATTR_GET_FD:extattr_get_fd(2):fa
-43107:AUE_EXTATTR_SET_FD:extattr_set_fd(2):fm
-43108:AUE_EXTATTR_LIST_FD:extattr_list_fd(2):fa
-43109:AUE_EXTATTR_DELETE_FD:extattr_delete_fd(2):fm
-43110:AUE_EXTATTR_GET_LINK:extattr_get_link(2):fa
-43111:AUE_EXTATTR_SET_LINK:extattr_set_link(2):fm
-43112:AUE_EXTATTR_LIST_LINK:extattr_list_link(2):fa
-43113:AUE_EXTATTR_DELETE_LINK:extattr_delete_link(2):fm
-43114:AUE_KENV:kenv(8):ad
-43115:AUE_JAIL_ATTACH:jail_attach(2):ad
-43116:AUE_SYSCTL_WRITE:sysctl(3):ad
-43117:AUE_IOPERM:linux ioperm:ad
-43118:AUE_READDIR:readdir(3):no
-43119:AUE_IOPL:linux iopl:ad
-43120:AUE_VM86:linux vm86:pc
-43121:AUE_MAC_GET_PROC:mac_get_proc(2):pc
-43122:AUE_MAC_SET_PROC:mac_set_proc(2):pc
-43123:AUE_MAC_GET_FD:mac_get_fd(2):fa
-43124:AUE_MAC_GET_FILE:mac_get_file(2):fa
-43125:AUE_MAC_SET_FD:mac_set_fd(2):fm
-43126:AUE_MAC_SET_FILE:mac_set_file(2):fm
-43127:AUE_MAC_SYSCALL:mac_syscall(2):ad
-43128:AUE_MAC_GET_PID:mac_get_pid(2):pc
-43129:AUE_MAC_GET_LINK:mac_get_link(2):fa
-43130:AUE_MAC_SET_LINK:mac_set_link(2):fm
-43131:AUE_MAC_EXECVE:mac_exeve(2):ex,pc
-43132:AUE_GETPATH_FROMFD:getpath_fromfd(2):fa
-43133:AUE_GETPATH_FROMADDR:getpath_fromaddr(2):fa
-43134:AUE_MQ_OPEN:mq_open(2):ip
-43135:AUE_MQ_SETATTR:mq_setattr(2):ip
-43136:AUE_MQ_TIMEDRECEIVE:mq_timedreceive(2):ip
-43137:AUE_MQ_TIMEDSEND:mq_timedsend(2):ip
-43138:AUE_MQ_NOTIFY:mq_notify(2):ip
-43139:AUE_MQ_UNLINK:mq_unlink(2):ip
-43140:AUE_LISTEN:listen(2):nt
-43141:AUE_MLOCKALL:mlockall(2):pc
-43142:AUE_MUNLOCKALL:munlockall(2):pc
-43143:AUE_CLOSEFROM:closefrom(2):cl
-43144:AUE_FEXECVE:fexecve(2):pc,ex
-43145:AUE_FACCESSAT:faccessat(2):fa
-43146:AUE_FCHMODAT:fchmodat(2):fm
-43147:AUE_LINKAT:linkat(2):fc
-43148:AUE_MKDIRAT:mkdirat(2):fc
-43149:AUE_MKFIFOAT:mkfifoat(2):fc
-43150:AUE_MKNODAT:mknodat(2):fc
-43151:AUE_READLINKAT:readlinkat(2):fr
-43152:AUE_SYMLINKAT:symlinkat(2):fc
-#
-# User space system events.
-#
-6152:AUE_login:login - local:lo
-6153:AUE_logout:logout - local:lo
-6159:AUE_su:su(1):lo
-6160:AUE_halt:system halt:ad
-6168:AUE_shutdown:system shutdown:ad
-6171:AUE_audit_startup:audit startup:ad
-6172:AUE_audit_shutdown:audit shutdown:ad
-6207:AUE_create_user:create user:ad
-6208:AUE_modify_user:modify user:ad
-6209:AUE_delete_user:delete user:ad
-6210:AUE_disable_user:disable user:ad
-6211:AUE_enable_user::ad
-6300:AUE_sudo:sudo(1):ad
-6501:AUE_modify_password:modify password:ad
-6511:AUE_create_group:create group:ad
-6512:AUE_delete_group:delete group:ad
-6513:AUE_modify_group:modify group:ad
-6514:AUE_add_to_group:add to group:ad
-6515:AUE_remove_from_group:remove from group:ad
-6521:AUE_revoke_obj:revoke object priv:fm
-6600:AUE_lw_login:loginwindow login:lo
-6601:AUE_lw_logout:loginwindow logout:lo
-7000:AUE_auth_user:user authentication:ad
-7001:AUE_ssconn:SecSrvr connection setup:ad
-7002:AUE_ssauthorize:SecSrvr AuthEngine:ad
-7003:AUE_ssauthint:SecSrvr authinternal mech:ad
-32800:AUE_openssh:OpenSSH login:lo
Copied: vendor/openbsm/1.2_alpha4/etc/audit_event (from rev 11163, vendor/openbsm/dist/etc/audit_event)
===================================================================
--- vendor/openbsm/1.2_alpha4/etc/audit_event (rev 0)
+++ vendor/openbsm/1.2_alpha4/etc/audit_event 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,675 @@
+#
+# $FreeBSD: stable/10/contrib/openbsm/etc/audit_event 293161 2016-01-04 16:32:21Z brueffer $
+#
+# The mapping between event identifiers and values is also hard-coded in
+# audit_kevents.h and audit_uevents.h, so changes must occur in both places,
+# and programs, such as the kernel, may need to be recompiled to recognize
+# those changes. It is advisable not to change the numbering or naming of
+# kernel audit events.
+#
+# Allocation of BSM event identifier ranges:
+#
+# 0 Reserved and invalid
+# 1 - 2047 Reserved for Solaris kernel events
+# 2048 - 5999 Reserved and unallocated
+# 6000 - 9999 Reserved for Solaris user events
+# 10000 - 32767 Reserved and unallocated
+# 32768 - 65535 Available for third party applications
+#
+# Of the third party range, OpenBSM allocates from the following ranges:
+#
+# 43000 - 44999 Reserved for OpenBSM kernel events
+# 45000 - 46999 Reserved for OpenBSM application events
+#
+0:AUE_NULL:indir system call:no
+1:AUE_EXIT:exit(2):pc
+2:AUE_FORK:fork(2):pc
+3:AUE_OPEN:open(2) - attr only:fa
+4:AUE_CREAT:creat(2):fc
+5:AUE_LINK:link(2):fc
+6:AUE_UNLINK:unlink(2):fd
+7:AUE_EXEC:exec(2):pc,ex
+8:AUE_CHDIR:chdir(2):pc
+9:AUE_MKNOD:mknod(2):fc
+10:AUE_CHMOD:chmod(2):fm
+11:AUE_CHOWN:chown(2):fm
+12:AUE_UMOUNT:umount(2) - old version:ad
+13:AUE_JUNK:junk:no
+14:AUE_ACCESS:access(2):fa
+15:AUE_KILL:kill(2):pc
+16:AUE_STAT:stat(2):fa
+17:AUE_LSTAT:lstat(2):fa
+18:AUE_ACCT:acct(2):ad
+19:AUE_MCTL:mctl(2):no
+20:AUE_REBOOT:reboot(2):ad
+21:AUE_SYMLINK:symlink(2):fc
+22:AUE_READLINK:readlink(2):fr
+23:AUE_EXECVE:execve(2):pc,ex
+24:AUE_CHROOT:chroot(2):pc
+25:AUE_VFORK:vfork(2):pc
+26:AUE_SETGROUPS:setgroups(2):pc
+27:AUE_SETPGRP:setpgrp(2):pc
+28:AUE_SWAPON:swapon(2):ad
+29:AUE_SETHOSTNAME:sethostname(2):ad
+30:AUE_FCNTL:fcntl(2):fm
+31:AUE_SETPRIORITY:setpriority(2):pc
+32:AUE_CONNECT:connect(2):nt
+33:AUE_ACCEPT:accept(2):nt
+34:AUE_BIND:bind(2):nt
+35:AUE_SETSOCKOPT:setsockopt(2):nt
+36:AUE_VTRACE:vtrace(2):pc
+37:AUE_SETTIMEOFDAY:settimeofday(2):ad
+38:AUE_FCHOWN:fchown(2):fm
+39:AUE_FCHMOD:fchmod(2):fm
+40:AUE_SETREUID:setreuid(2):pc
+41:AUE_SETREGID:setregid(2):pc
+42:AUE_RENAME:rename(2):fc,fd
+43:AUE_TRUNCATE:truncate(2):fw
+44:AUE_FTRUNCATE:ftruncate(2):fw
+45:AUE_FLOCK:flock(2):fm
+46:AUE_SHUTDOWN:shutdown(2):nt
+47:AUE_MKDIR:mkdir(2):fc
+48:AUE_RMDIR:rmdir(2):fd
+49:AUE_UTIMES:utimes(2):fm
+50:AUE_ADJTIME:adjtime(2):ad
+51:AUE_SETRLIMIT:setrlimit(2):pc
+52:AUE_KILLPG:killpg(2):pc
+53:AUE_NFS_SVC:nfs_svc(2):ad
+54:AUE_STATFS:statfs(2):fa
+55:AUE_FSTATFS:fstatfs(2):fa
+56:AUE_UNMOUNT:unmount(2):ad
+57:AUE_ASYNC_DAEMON:async_daemon(2):ad
+58:AUE_NFS_GETFH:nfs_getfh(2):ad
+59:AUE_SETDOMAINNAME:setdomainname(2):ad
+60:AUE_QUOTACTL:quotactl(2):ad
+61:AUE_EXPORTFS:exportfs(2):ad
+62:AUE_MOUNT:mount(2):ad
+63:AUE_SEMSYS:semsys(2):ip
+64:AUE_MSGSYS:msgsys(2):ip
+65:AUE_SHMSYS:shmsys(2):ip
+66:AUE_BSMSYS:bsmsys(2):ad
+67:AUE_RFSSYS:rfssys(2):ad
+68:AUE_FCHDIR:fchdir(2):pc
+69:AUE_FCHROOT:fchroot(2):pc
+70:AUE_VPIXSYS:vpixsys(2):no
+71:AUE_PATHCONF:pathconf(2):fa
+72:AUE_OPEN_R:open(2) - read:fr
+73:AUE_OPEN_RC:open(2) - read,creat:fc,fr,fa,fm
+74:AUE_OPEN_RT:open(2) - read,trunc:fd,fr,fa,fm
+75:AUE_OPEN_RTC:open(2) - read,creat,trunc:fc,fd,fr,fa,fm
+76:AUE_OPEN_W:open(2) - write:fw
+77:AUE_OPEN_WC:open(2) - write,creat:fc,fw,fa,fm
+78:AUE_OPEN_WT:open(2) - write,trunc:fd,fw,fa,fm
+79:AUE_OPEN_WTC:open(2) - write,creat,trunc:fc,fd,fw,fa,fm
+80:AUE_OPEN_RW:open(2) - read,write:fr,fw
+81:AUE_OPEN_RWC:open(2) - read,write,creat:fc,fw,fr,fa,fm
+82:AUE_OPEN_RWT:open(2) - read,write,trunc:fd,fr,fw,fa,fm
+83:AUE_OPEN_RWTC:open(2) - read,write,creat,trunc:fc,fd,fw,fr,fa,fm
+84:AUE_MSGCTL:msgctl(2) - illegal command:ip
+85:AUE_MSGCTL_RMID:msgctl(2) - IPC_RMID command:ip
+86:AUE_MSGCTL_SET:msgctl(2) - IPC_SET command:ip
+87:AUE_MSGCTL_STAT:msgctl(2) - IPC_STAT command:ip
+88:AUE_MSGGET:msgget(2):ip
+89:AUE_MSGRCV:msgrcv(2):ip
+90:AUE_MSGSND:msgsnd(2):ip
+91:AUE_SHMCTL:shmctl(2) - illegal command:ip
+92:AUE_SHMCTL_RMID:shmctl(2) - IPC_RMID command:ip
+93:AUE_SHMCTL_SET:shmctl(2) - IPC_SET command:ip
+94:AUE_SHMCTL_STAT:shmctl(2) - IPC_STAT command:ip
+95:AUE_SHMGET:shmget(2):ip
+96:AUE_SHMAT:shmat(2):ip
+97:AUE_SHMDT:shmdt(2):ip
+98:AUE_SEMCTL:semctl(2) - illegal command:ip
+99:AUE_SEMCTL_RMID:semctl(2) - IPC_RMID command:ip
+100:AUE_SEMCTL_SET:semctl(2) - IPC_SET command:ip
+101:AUE_SEMCTL_STAT:semctl(2) - IPC_STAT command:ip
+102:AUE_SEMCTL_GETNCNT:semctl(2) - GETNCNT command:ip
+103:AUE_SEMCTL_GETPID:semctl(2) - GETPID command:ip
+104:AUE_SEMCTL_GETVAL:semctl(2) - GETVAL command:ip
+105:AUE_SEMCTL_GETALL:semctl(2) - GETALL command:ip
+106:AUE_SEMCTL_GETZCNT:semctl(2) - GETZCNT command:ip
+107:AUE_SEMCTL_SETVAL:semctl(2) - SETVAL command:ip
+108:AUE_SEMCTL_SETALL:semctl(2) - SETALL command:ip
+109:AUE_SEMGET:semget(2):ip
+110:AUE_SEMOP:semop(2):ip
+111:AUE_CORE:process dumped core:fc
+112:AUE_CLOSE:close(2):cl
+113:AUE_SYSTEMBOOT:system booted:na
+114:AUE_ASYNC_DAEMON_EXIT:async_daemon(2) exited:ad
+115:AUE_NFSSVC_EXIT:nfssvc(2) exited:ad
+128:AUE_WRITEL:writel(2):no
+129:AUE_WRITEVL:writevl(2):no
+130:AUE_GETAUID:getauid(2):ad
+131:AUE_SETAUID:setauid(2):ad
+132:AUE_GETAUDIT:getaudit(2):ad
+133:AUE_SETAUDIT:setaudit(2):ad
+134:AUE_GETUSERAUDIT:getuseraudit(2):ad
+135:AUE_SETUSERAUDIT:setuseraudit(2):ad
+136:AUE_AUDITSVC:auditsvc(2):ad
+137:AUE_AUDITUSER:audituser(2):ad
+138:AUE_AUDITON:auditon(2):ad
+139:AUE_AUDITON_GTERMID:auditon(2) - GETTERMID command:ad
+140:AUE_AUDITON_STERMID:auditon(2) - SETTERMID command:ad
+141:AUE_AUDITON_GPOLICY:auditon(2) - GPOLICY command:ad
+142:AUE_AUDITON_SPOLICY:auditon(2) - SPOLICY command:ad
+143:AUE_AUDITON_GESTATE:auditon(2) - GESTATE command:ad
+144:AUE_AUDITON_SESTATE:auditon(2) - SESTATE command:ad
+145:AUE_AUDITON_GQCTRL:auditon(2) - GQCTRL command:ad
+146:AUE_AUDITON_SQCTRL:auditon(2) - SQCTRL command:ad
+147:AUE_GETKERNSTATE:getkernstate(2):ad
+148:AUE_SETKERNSTATE:setkernstate(2):ad
+149:AUE_GETPORTAUDIT:getportaudit(2):ad
+150:AUE_AUDITSTAT:auditstat(2):ad
+151:AUE_REVOKE:revoke(2):cl
+152:AUE_MAC:Solaris AUE_MAC:no
+153:AUE_ENTERPROM:enter prom:ad
+154:AUE_EXITPROM:exit prom:ad
+155:AUE_IFLOAT:Solaris AUE_IFLOAT:no
+156:AUE_PFLOAT:Solaris AUE_PFLOAT:no
+157:AUE_UPRIV:Solaris AUE_UPRIV:no
+158:AUE_IOCTL:ioctl(2):io
+173:AUE_ONESIDE:one-sided session record:nt
+174:AUE_MSGGETL:msggetl(2):ip
+175:AUE_MSGRCVL:msgrcvl(2):ip
+176:AUE_MSGSNDL:msgsndl(2):ip
+177:AUE_SEMGETL:semgetl(2):ip
+178:AUE_SHMGETL:shmgetl(2):ip
+183:AUE_SOCKET:socket(2):nt
+184:AUE_SENDTO:sendto(2):nt
+185:AUE_PIPE:pipe(2):ip
+186:AUE_SOCKETPAIR:socketpair(2):nt
+187:AUE_SEND:send(2):nt
+188:AUE_SENDMSG:sendmsg(2):nt
+189:AUE_RECV:recv(2):nt
+190:AUE_RECVMSG:recvmsg(2):nt
+191:AUE_RECVFROM:recvfrom(2):nt
+192:AUE_READ:read(2):no
+193:AUE_GETDENTS:getdents(2):no
+194:AUE_LSEEK:lseek(2):no
+195:AUE_WRITE:write(2):no
+196:AUE_WRITEV:writev(2):no
+197:AUE_NFS:nfs server:ad
+198:AUE_READV:readv(2):no
+199:AUE_OSTAT:Solaris old stat(2):fa
+200:AUE_SETUID:setuid(2):pc
+201:AUE_STIME:old stime(2):ad
+202:AUE_UTIME:old utime(2):fm
+203:AUE_NICE:old nice(2):pc
+204:AUE_OSETPGRP:Solaris old setpgrp(2):pc
+205:AUE_SETGID:setgid(2):pc
+206:AUE_READL:readl(2):no
+207:AUE_READVL:readvl(2):no
+208:AUE_FSTAT:fstat(2):fa
+209:AUE_DUP2:dup2(2):no
+210:AUE_MMAP:mmap(2):no
+211:AUE_AUDIT:audit(2):ot
+212:AUE_PRIOCNTLSYS:Solaris priocntlsys(2):pc
+213:AUE_MUNMAP:munmap(2):cl
+214:AUE_SETEGID:setegid(2):pc
+215:AUE_SETEUID:seteuid(2):pc
+216:AUE_PUTMSG:putmsg(2):nt
+217:AUE_GETMSG:getmsg(2):nt
+218:AUE_PUTPMSG:putpmsg(2):nt
+219:AUE_GETPMSG:getpmsg(2):nt
+220:AUE_AUDITSYS:audit system calls place holder:no
+221:AUE_AUDITON_GETKMASK:auditon(2) - get kernel mask:ad
+222:AUE_AUDITON_SETKMASK:auditon(2) - set kernel mask:ad
+223:AUE_AUDITON_GETCWD:auditon(2) - get cwd:ad
+224:AUE_AUDITON_GETCAR:auditon(2) - get car:ad
+225:AUE_AUDITON_GETSTAT:auditon(2) - get audit statistics:ad
+226:AUE_AUDITON_SETSTAT:auditon(2) - reset audit statistics:ad
+227:AUE_AUDITON_SETUMASK:auditon(2) - set mask per uid:ad
+228:AUE_AUDITON_SETSMASK:auditon(2) - set mask per session ID:ad
+229:AUE_AUDITON_GETCOND:auditon(2) - get audit state:ad
+230:AUE_AUDITON_SETCOND:auditon(2) - set audit state:ad
+231:AUE_AUDITON_GETCLASS:auditon(2) - get event class:ad
+232:AUE_AUDITON_SETCLASS:auditon(2) - set event class:ad
+233:AUE_UTSSYS:utssys(2) - fusers:ad
+234:AUE_STATVFS:statvfs(2):fa
+235:AUE_XSTAT:xstat(2):fa
+236:AUE_LXSTAT:lxstat(2):fa
+237:AUE_LCHOWN:lchown(2):fm
+238:AUE_MEMCNTL:memcntl(2):ot
+239:AUE_SYSINFO:sysinfo(2):ad
+240:AUE_XMKNOD:xmknod(2):fc
+241:AUE_FORK1:fork1(2):pc
+242:AUE_MODCTL:modctl(2) system call place holder:no
+243:AUE_MODLOAD:modctl(2) - load module:ad
+244:AUE_MODUNLOAD:modctl(2) - unload module:ad
+245:AUE_MODCONFIG:modctl(2) - configure module:ad
+246:AUE_MODADDMAJ:modctl(2) - bind module:ad
+247:AUE_SOCKACCEPT:getmsg-accept:nt
+248:AUE_SOCKCONNECT:putmsg-connect:nt
+249:AUE_SOCKSEND:putmsg-send:nt
+250:AUE_SOCKRECEIVE:getmsg-receive:nt
+251:AUE_ACLSET:acl(2) - SETACL comand:fm
+252:AUE_FACLSET:facl(2) - SETACL command:fm
+253:AUE_DOORFS:doorfs(2) - system call place holder:no
+254:AUE_DOORFS_DOOR_CALL:doorfs(2) - DOOR_CALL:ip
+255:AUE_DOORFS_DOOR_RETURN:doorfs(2) - DOOR_RETURN:ip
+256:AUE_DOORFS_DOOR_CREATE:doorfs(2) - DOOR_CREATE:ip
+257:AUE_DOORFS_DOOR_REVOKE:doorfs(2) - DOOR_REVOKE:ip
+258:AUE_DOORFS_DOOR_INFO:doorfs(2) - DOOR_INFO:ip
+259:AUE_DOORFS_DOOR_CRED:doorfs(2) - DOOR_CRED:ip
+260:AUE_DOORFS_DOOR_BIND:doorfs(2) - DOOR_BIND:ip
+261:AUE_DOORFS_DOOR_UNBIND:doorfs(2) - DOOR_UNBIND:ip
+262:AUE_P_ONLINE:p_online(2):ad
+263:AUE_PROCESSOR_BIND:processor_bind(2):ad
+264:AUE_INST_SYNC:inst_sync(2):ad
+265:AUE_SOCKCONFIG:configure socket:nt
+266:AUE_SETAUDIT_ADDR:setaudit_addr(2):ad
+267:AUE_GETAUDIT_ADDR:getaudit_addr(2):ad
+268:AUE_UMOUNT2:Solaris umount(2):ad
+269:AUE_FSAT:fsat(2) - place holder:no
+270:AUE_OPENAT_R:openat(2) - read:fr
+271:AUE_OPENAT_RC:openat(2) - read,creat:fc,fr,fa,fm
+272:AUE_OPENAT_RT:openat(2) - read,trunc:fd,fr,fa,fm
+273:AUE_OPENAT_RTC:openat(2) - read,creat,trunc:fc,fd,fr,fa,fm
+274:AUE_OPENAT_W:openat(2) - write:fw
+275:AUE_OPENAT_WC:openat(2) - write,creat:fc,fw,fa,fm
+276:AUE_OPENAT_WT:openat(2) - write,trunc:fd,fw,fa,fm
+277:AUE_OPENAT_WTC:openat(2) - write,creat,trunc:fc,fd,fw,fa,fm
+278:AUE_OPENAT_RW:openat(2) - read,write:fr,fw
+279:AUE_OPENAT_RWC:openat(2) - read,write,create:fc,fw,fr,fa,fm
+280:AUE_OPENAT_RWT:openat(2) - read,write,trunc:fd,fw,fr,fa,fm
+281:AUE_OPENAT_RWTC:openat(2) - read,write,creat,trunc:fc,fd,fw,fr,fa,fm
+282:AUE_RENAMEAT:renameat(2):fc,fd
+283:AUE_FSTATAT:fstatat(2):fa
+284:AUE_FCHOWNAT:fchownat(2):fm
+285:AUE_FUTIMESAT:futimesat(2):fm
+286:AUE_UNLINKAT:unlinkat(2):fd
+287:AUE_CLOCK_SETTIME:clock_settime(2):ad
+288:AUE_NTP_ADJTIME:ntp_adjtime(2):ad
+289:AUE_SETPPRIV:setppriv(2):pc
+290:AUE_MODDEVPLCY:modctl(2) - configure device policy:ad
+291:AUE_MODADDPRIV:modctl(2) - configure additional privilege:ad
+292:AUE_CRYPTOADM:kernel cryptographic framework:ad
+293:AUE_CONFIGKSSL:configure kernel SSL:ad
+294:AUE_BRANDSYS:brandsys(2):ot
+295:AUE_PF_POLICY_ADDRULE:Add IPsec policy rule:ad
+296:AUE_PF_POLICY_DELRULE:Delete IPsec policy rule:ad
+297:AUE_PF_POLICY_CLONE:Clone IPsec policy:ad
+298:AUE_PF_POLICY_FLIP:Flip IPsec policy:ad
+299:AUE_PF_POLICY_FLUSH:Flush IPsec policy rules:ad
+300:AUE_PF_POLICY_ALGS:Update IPsec algorithms:ad
+301:AUE_PORTFS:portfs:fa
+#
+# What follows are deprecated Darwin event numbers that may soon^H^H^H^Hnow
+# conflict with Solaris events.
+#
+301:AUE_DARWIN_GETFSSTAT:getfsstat(2):fa
+302:AUE_DARWIN_PTRACE:ptrace(2):pc
+303:AUE_DARWIN_CHFLAGS:chflags(2):fm
+304:AUE_DARWIN_FCHFLAGS:fchflags(2):fm
+305:AUE_DARWIN_PROFILE:profil(2):pc
+306:AUE_DARWIN_KTRACE:ktrace(2):pc
+307:AUE_DARWIN_SETLOGIN:setlogin(2):pc
+308:AUE_DARWIN_REBOOT:reboot(2):ad
+309:AUE_DARWIN_REVOKE:revoke(2):cl
+310:AUE_DARWIN_UMASK:umask(2):pc
+311:AUE_DARWIN_MPROTECT:mprotect(2):fm
+312:AUE_DARWIN_SETPRIORITY:setpriority(2):pc,ot
+313:AUE_DARWIN_SETTIMEOFDAY:settimeofday(2):ad
+314:AUE_DARWIN_FLOCK:flock(2):fm
+315:AUE_DARWIN_MKFIFO:mkfifo(2):fc
+316:AUE_DARWIN_POLL:poll(2):no
+317:AUE_DARWIN_SOCKETPAIR:socketpair(2):nt
+318:AUE_DARWIN_FUTIMES:futimes(2):fm
+319:AUE_DARWIN_SETSID:setsid(2):pc
+320:AUE_DARWIN_SETPRIVEXEC:setprivexec(2):pc
+321:AUE_DARWIN_NFSSVC:nfssvc(2):ad
+322:AUE_DARWIN_GETFH:getfh(2):fa
+323:AUE_DARWIN_QUOTACTL:quotactl(2):ad
+324:AUE_DARWIN_ADDPROFILE:add_profil():pc
+325:AUE_DARWIN_KDEBUGTRACE:kdebug_trace():pc
+326:AUE_DARWIN_FSTAT:fstat(2):fa
+327:AUE_DARWIN_FPATHCONF:fpathconf(2):fa
+328:AUE_DARWIN_GETDIRENTRIES:getdirentries(2):no
+329:AUE_DARWIN_TRUNCATE:truncate(2):fw
+330:AUE_DARWIN_FTRUNCATE:ftruncate(2):fw
+331:AUE_DARWIN_SYSCTL:sysctl(3):ad
+332:AUE_DARWIN_MLOCK:mlock(2):pc
+333:AUE_DARWIN_MUNLOCK:munlock(2):pc
+334:AUE_DARWIN_UNDELETE:undelete(2):fm
+335:AUE_DARWIN_GETATTRLIST:getattrlist():fa
+336:AUE_DARWIN_SETATTRLIST:setattrlist():fm
+337:AUE_DARWIN_GETDIRENTRIESATTR:getdirentriesattr():fa
+338:AUE_DARWIN_EXCHANGEDATA:exchangedata():fw
+339:AUE_DARWIN_SEARCHFS:searchfs():fa
+340:AUE_DARWIN_MINHERIT:minherit(2):pc
+341:AUE_DARWIN_SEMCONFIG:semconfig():ip
+342:AUE_DARWIN_SEMOPEN:sem_open(2):ip
+343:AUE_DARWIN_SEMCLOSE:sem_close(2):ip
+344:AUE_DARWIN_SEMUNLINK:sem_unlink(2):ip
+345:AUE_DARWIN_SHMOPEN:shm_open(2):ip
+346:AUE_DARWIN_SHMUNLINK:shm_unlink(2):ip
+347:AUE_DARWIN_LOADSHFILE:load_shared_file():fr
+348:AUE_DARWIN_RESETSHFILE:reset_shared_file():ot
+349:AUE_DARWIN_NEWSYSTEMSHREG:new_system_share_regions():ot
+350:AUE_DARWIN_PTHREADKILL:pthread_kill(2):pc
+351:AUE_DARWIN_PTHREADSIGMASK:pthread_sigmask(2):pc
+352:AUE_DARWIN_AUDITCTL:auditctl(2):ad
+353:AUE_DARWIN_RFORK:rfork(2):pc
+354:AUE_DARWIN_LCHMOD:lchmod(2):fm
+355:AUE_DARWIN_SWAPOFF:swapoff(2):ad
+356:AUE_DARWIN_INITPROCESS:init_process():pc
+357:AUE_DARWIN_MAPFD:map_fd():fa
+358:AUE_DARWIN_TASKFORPID:task_for_pid():pc
+359:AUE_DARWIN_PIDFORTASK:pid_for_task():pc
+360:AUE_DARWIN_SYSCTL_NONADMIN:sysctl() - non-admin:ot
+361:AUE_DARWIN_COPYFILE:copyfile():fr,fw
+#
+# OpenBSM-specific kernel events.
+#
+43001:AUE_GETFSSTAT:getfsstat(2):fa
+43002:AUE_PTRACE:ptrace(2):pc
+43003:AUE_CHFLAGS:chflags(2):fm
+43004:AUE_FCHFLAGS:fchflags(2):fm
+43005:AUE_PROFILE:profil(2):pc
+43006:AUE_KTRACE:ktrace(2):pc
+43007:AUE_SETLOGIN:setlogin(2):pc
+43008:AUE_OPENBSM_REVOKE:revoke(2):cl
+43009:AUE_UMASK:umask(2):pc
+43010:AUE_MPROTECT:mprotect(2):fm
+43011:AUE_MKFIFO:mkfifo(2):fc
+43012:AUE_POLL:poll(2):no
+43013:AUE_FUTIMES:futimes(2):fm
+43014:AUE_SETSID:setsid(2):pc
+43015:AUE_SETPRIVEXEC:setprivexec(2):pc
+43016:AUE_ADDPROFILE:add_profil():pc
+43017:AUE_KDEBUGTRACE:kdebug_trace():pc
+43018:AUE_OPENBSM_FSTAT:fstat(2):fa
+43019:AUE_FPATHCONF:fpathconf(2):fa
+43020:AUE_GETDIRENTRIES:getdirentries(2):no
+43021:AUE_SYSCTL:sysctl(3):ot
+43022:AUE_MLOCK:mlock(2):pc
+43023:AUE_MUNLOCK:munlock(2):pc
+43024:AUE_UNDELETE:undelete(2):fm
+43025:AUE_GETATTRLIST:getattrlist():fa
+43026:AUE_SETATTRLIST:setattrlist():fm
+43027:AUE_GETDIRENTRIESATTR:getdirentriesattr():fa
+43028:AUE_EXCHANGEDATA:exchangedata():fw
+43029:AUE_SEARCHFS:searchfs():fa
+43030:AUE_MINHERIT:minherit(2):pc
+43031:AUE_SEMCONFIG:semconfig():ip
+43032:AUE_SEMOPEN:sem_open(2):ip
+43033:AUE_SEMCLOSE:sem_close(2):ip
+43034:AUE_SEMUNLINK:sem_unlink(2):ip
+43035:AUE_SHMOPEN:shm_open(2):ip
+43036:AUE_SHMUNLINK:shm_unlink(2):ip
+43037:AUE_LOADSHFILE:load_shared_file():fr
+43038:AUE_RESETSHFILE:reset_shared_file():ot
+43039:AUE_NEWSYSTEMSHREG:new_system_share_regions():ot
+43040:AUE_PTHREADKILL:pthread_kill(2):pc
+43041:AUE_PTHREADSIGMASK:pthread_sigmask(2):pc
+43042:AUE_AUDITCTL:auditctl(2):ad
+43043:AUE_RFORK:rfork(2):pc
+43044:AUE_LCHMOD:lchmod(2):fm
+43045:AUE_SWAPOFF:swapoff(2):ad
+43046:AUE_INITPROCESS:init_process():pc
+43047:AUE_MAPFD:map_fd():fa
+43048:AUE_TASKFORPID:task_for_pid():pc
+43049:AUE_PIDFORTASK:pid_for_task():pc
+43050:AUE_SYSCTL_NONADMIN:sysctl() - non-admin:ot
+43051:AUE_COPYFILE:copyfile(2):fr,fw
+43052:AUE_LUTIMES:lutimes(2):fm
+43053:AUE_LCHFLAGS:lchflags(2):fm
+43054:AUE_SENDFILE:sendfile(2):nt
+43055:AUE_USELIB:uselib(2):fa
+43056:AUE_GETRESUID:getresuid(2):pc
+43057:AUE_SETRESUID:setresuid(2):pc
+43058:AUE_GETRESGID:getresgid(2):pc
+43059:AUE_SETRESGID:setresgid(2):pc
+43060:AUE_WAIT4:wait4(2):pc
+43061:AUE_LGETFH:lgetfh(2):fa
+43062:AUE_FHSTATFS:fhstatfs(2):fa
+43063:AUE_FHOPEN:fhopen(2):fa
+43064:AUE_FHSTAT:fhstat(2):fa
+43065:AUE_JAIL:jail(2):pc
+43066:AUE_EACCESS:eaccess(2):fa
+43067:AUE_KQUEUE:kqueue(2):no
+43068:AUE_KEVENT:kevent(2):no
+43069:AUE_FSYNC:fsync(2):fm
+43070:AUE_NMOUNT:nmount(2):ad
+43071:AUE_BDFLUSH:bdflush(2):ad
+43072:AUE_SETFSUID:setfsuid(2):ot
+43073:AUE_SETFSGID:setfsgid(2):ot
+43074:AUE_PERSONALITY:personality(2):pc
+43075:AUE_SCHED_GETSCHEDULER:getscheduler(2):ad
+43076:AUE_SCHED_SETSCHEDULER:setscheduler(2):ad
+43077:AUE_PRCTL:prctl(2):pc
+43078:AUE_GETCWD:getcwd(2):pc
+43079:AUE_CAPGET:capget(2):pc
+43080:AUE_CAPSET:capset(2):pc
+43081:AUE_PIVOT_ROOT:pivot_root(2):pc
+43082:AUE_RTPRIO::rtprio(2):pc
+43083:AUE_SCHED_GETPARAM:sched_getparam(2):ad
+43084:AUE_SCHED_SETPARAM:sched_setparam(2):ad
+43085:AUE_SCHED_GET_PRIORITY_MAX:sched_get_priority_max(2):ad
+43086:AUE_SCHED_GET_PRIORITY_MIN:sched_get_priority_min(2):ad
+43087:AUE_SCHED_RR_GET_INTERVAL:sched_rr_get_interval(2):ad
+43088:AUE_ACL_GET_FILE:acl_get_file(2):fa
+43089:AUE_ACL_SET_FILE:acl_set_file(2):fm
+43090:AUE_ACL_GET_FD:acl_get_fd(2):fa
+43091:AUE_ACL_SET_FD:acl_set_fd(2):fm
+43092:AUE_ACL_DELETE_FILE:acl_delete_file(2):fm
+43093:AUE_ACL_DELETE_FD:acl_delete_fd(2):fm
+43094:AUE_ACL_CHECK_FILE:acl_aclcheck_file(2):fa
+43095:AUE_ACL_CHECK_FD:acl_aclcheck_fd(2):fa
+43096:AUE_ACL_GET_LINK:acl_get_link(2):fa
+43097:AUE_ACL_SET_LINK:acl_set_link(2):fm
+43098:AUE_ACL_DELETE_LINK:acl_delete_link(2):fm
+43099:AUE_ACL_CHECK_LINK:acl_aclcheck_link(2):fa
+43100:AUE_SYSARCH:sysarch(2):ot
+43101:AUE_EXTATTRCTL:extattrctl(2):fm
+43102:AUE_EXTATTR_GET_FILE:extattr_get_file(2):fa
+43103:AUE_EXTATTR_SET_FILE:extattr_set_file(2):fm
+43104:AUE_EXTATTR_LIST_FILE:extattr_list_file(2):fa
+43105:AUE_EXTATTR_DELETE_FILE:extattr_delete_file(2):fm
+43106:AUE_EXTATTR_GET_FD:extattr_get_fd(2):fa
+43107:AUE_EXTATTR_SET_FD:extattr_set_fd(2):fm
+43108:AUE_EXTATTR_LIST_FD:extattr_list_fd(2):fa
+43109:AUE_EXTATTR_DELETE_FD:extattr_delete_fd(2):fm
+43110:AUE_EXTATTR_GET_LINK:extattr_get_link(2):fa
+43111:AUE_EXTATTR_SET_LINK:extattr_set_link(2):fm
+43112:AUE_EXTATTR_LIST_LINK:extattr_list_link(2):fa
+43113:AUE_EXTATTR_DELETE_LINK:extattr_delete_link(2):fm
+43114:AUE_KENV:kenv(8):ad
+43115:AUE_JAIL_ATTACH:jail_attach(2):ad
+43116:AUE_SYSCTL_WRITE:sysctl(3):ad
+43117:AUE_IOPERM:linux ioperm:ad
+43118:AUE_READDIR:readdir(3):no
+43119:AUE_IOPL:linux iopl:ad
+43120:AUE_VM86:linux vm86:pc
+43121:AUE_MAC_GET_PROC:mac_get_proc(2):pc
+43122:AUE_MAC_SET_PROC:mac_set_proc(2):pc
+43123:AUE_MAC_GET_FD:mac_get_fd(2):fa
+43124:AUE_MAC_GET_FILE:mac_get_file(2):fa
+43125:AUE_MAC_SET_FD:mac_set_fd(2):fm
+43126:AUE_MAC_SET_FILE:mac_set_file(2):fm
+43127:AUE_MAC_SYSCALL:mac_syscall(2):ad
+43128:AUE_MAC_GET_PID:mac_get_pid(2):pc
+43129:AUE_MAC_GET_LINK:mac_get_link(2):fa
+43130:AUE_MAC_SET_LINK:mac_set_link(2):fm
+43131:AUE_MAC_EXECVE:mac_execve(2):ex,pc
+43132:AUE_GETPATH_FROMFD:getpath_fromfd(2):fa
+43133:AUE_GETPATH_FROMADDR:getpath_fromaddr(2):fa
+43134:AUE_MQ_OPEN:mq_open(2):ip
+43135:AUE_MQ_SETATTR:mq_setattr(2):ip
+43136:AUE_MQ_TIMEDRECEIVE:mq_timedreceive(2):ip
+43137:AUE_MQ_TIMEDSEND:mq_timedsend(2):ip
+43138:AUE_MQ_NOTIFY:mq_notify(2):ip
+43139:AUE_MQ_UNLINK:mq_unlink(2):ip
+43140:AUE_LISTEN:listen(2):nt
+43141:AUE_MLOCKALL:mlockall(2):pc
+43142:AUE_MUNLOCKALL:munlockall(2):pc
+43143:AUE_CLOSEFROM:closefrom(2):cl
+43144:AUE_FEXECVE:fexecve(2):pc,ex
+43145:AUE_FACCESSAT:faccessat(2):fa
+43146:AUE_FCHMODAT:fchmodat(2):fm
+43147:AUE_LINKAT:linkat(2):fc
+43148:AUE_MKDIRAT:mkdirat(2):fc
+43149:AUE_MKFIFOAT:mkfifoat(2):fc
+43150:AUE_MKNODAT:mknodat(2):fc
+43151:AUE_READLINKAT:readlinkat(2):fr
+43152:AUE_SYMLINKAT:symlinkat(2):fc
+43153:AUE_MAC_GETFSSTAT:mac_getfsstat(2):fa
+43154:AUE_MAC_GET_MOUNT:mac_get_mount(2):fa
+43155:AUE_MAC_GET_LCID:mac_get_lcid(2):pc
+43156:AUE_MAC_GET_LCTX:mac_get_lctx(2):pc
+43157:AUE_MAC_SET_LCTX:mac_set_lctx(2):pc
+43158:AUE_MAC_MOUNT:mac_mount(2):ad
+43159:AUE_GETLCID:getlcid(2):pc
+43160:AUE_SETLCID:setlcid(2):pc
+43161:AUE_TASKNAMEFORPID:taskname_for_pid():pc
+43162:AUE_ACCESS_EXTENDED:access_extended(2):fa
+43163:AUE_CHMOD_EXTENDED:chmod_extended(2):fm
+43164:AUE_FCHMOD_EXTENDED:fchmod_extended(2):fm
+43165:AUE_FSTAT_EXTENDED:fstat_extended(2):fa
+43166:AUE_LSTAT_EXTENDED:lstat_extended(2):fa
+43167:AUE_MKDIR_EXTENDED:mkdir_extended(2):fc
+43168:AUE_MKFIFO_EXTENDED:mkfifo_extended(2):fc
+43169:AUE_OPEN_EXTENDED:open_extended(2) - attr only:fa
+43170:AUE_OPEN_EXTENDED_R:open_extended(2) - read:fr
+43171:AUE_OPEN_EXTENDED_RC:open_extended(2) - read,creat:fc,fr,fa,fm
+43172:AUE_OPEN_EXTENDED_RT:open_extended(2) - read,trunc:fd,fr,fa,fm
+43173:AUE_OPEN_EXTENDED_RTC:open_extended(2) - read,creat,trunc:fc,fd,fr,fa,fm
+43174:AUE_OPEN_EXTENDED_W:open_extended(2) - write:fw
+43175:AUE_OPEN_EXTENDED_WC:open_extended(2) - write,creat:fc,fw,fa,fm
+43176:AUE_OPEN_EXTENDED_WT:open_extended(2) - write,trunc:fd,fw,fa,fm
+43177:AUE_OPEN_EXTENDED_WTC:open_extended(2) - write,creat,trunc:fc,fd,fw,fa,fm
+43178:AUE_OPEN_EXTENDED_RW:open_extended(2) - read,write:fr,fw
+43179:AUE_OPEN_EXTENDED_RWC:open_extended(2) - read,write,creat:fc,fw,fr,fa,fm
+43180:AUE_OPEN_EXTENDED_RWT:open_extended(2) - read,write,trunc:fd,fr,fw,fa,fm
+43181:AUE_OPEN_EXTENDED_RWTC:open_extended(2) - read,write,creat,trunc:fc,fd,fw,fr,fa,fm
+43182:AUE_STAT_EXTENDED:stat_extended(2):fa
+43183:AUE_UMASK_EXTENDED:umask_extended(2):pc
+43184:AUE_OPENAT:openat(2) - attr only:fa
+43185:AUE_POSIX_OPENPT:posix_openpt(2):ip
+43186:AUE_CAP_NEW:cap_new(2):fm
+43187:AUE_CAP_RIGHTS_GET:cap_rights_get(2):fm
+43188:AUE_CAP_ENTER:cap_enter(2):pc
+43189:AUE_CAP_GETMODE:cap_getmode(2):pc
+43190:AUE_POSIX_SPAWN:posix_spawn(2):pc
+43191:AUE_FSGETPATH:fsgetpath(2):ot
+43192:AUE_PREAD:pread(2):no
+43193:AUE_PWRITE:pwrite(2):no
+43194:AUE_FSCTL:fsctl():fm
+43195:AUE_FFSCTL:ffsctl():fm
+43196:AUE_LPATHCONF:lpathconf(2):fa
+43197:AUE_PDFORK:pdfork(2):pc
+43198:AUE_PDKILL:pdkill(2):pc
+43199:AUE_PDGETPID:pdgetpid(2):pc
+43200:AUE_PDWAIT:pdwait(2):pc
+43201:AUE_WAIT6:wait6(2):pc
+43202:AUE_CAP_RIGHTS_LIMIT:cap_rights_limit(2):fm
+43203:AUE_CAP_IOCTLS_LIMIT:cap_ioctls_limit(2):fm
+43204:AUE_CAP_IOCTLS_GET:cap_ioctls_get(2):fm
+43205:AUE_CAP_FCNTLS_LIMIT:cap_fcntls_limit(2):fm
+43206:AUE_CAP_FCNTLS_GET:cap_fcntls_get(2):fm
+43207:AUE_BINDAT:bindat(2):nt
+43208:AUE_CONNECTAT:connectat(2):nt
+43209:AUE_CHFLAGSAT:chflagsat(2):fm
+#
+# Solaris userspace events.
+#
+6144:AUE_at_create:at-create atjob:ad
+6145:AUE_at_delete:at-delete atjob (at or atrm):ad
+6146:AUE_at_perm:at-permission:no
+6147:AUE_cron_invoke:cron-invoke:ad
+6148:AUE_crontab_create:crontab-crontab created:ad
+6149:AUE_crontab_delete:crontab-crontab deleted:ad
+6150:AUE_crontab_perm:crontab-permission:no
+6151:AUE_inetd_connect:inetd connection:na
+6152:AUE_login:login - local:lo
+6153:AUE_logout:logout - local:lo
+6154:AUE_telnet:login - telnet:lo
+6155:AUE_rlogin:login - rlogin:lo
+6156:AUE_mountd_mount:mount:na
+6157:AUE_mountd_umount:unmount:na
+6158:AUE_rshd:rsh access:lo
+6159:AUE_su:su(1):lo
+6160:AUE_halt:system halt:ad
+6161:AUE_reboot:system reboot:ad
+6162:AUE_rexecd:rexecd:lo
+6163:AUE_passwd:passwd:lo
+6164:AUE_rexd:rexd:lo
+6165:AUE_ftpd:ftp access:lo
+6166:AUE_init:init:lo
+6167:AUE_uadmin:uadmin:no
+6168:AUE_shutdown:system shutdown:ad
+6168:AUE_poweroff:system poweroff:ad
+6170:AUE_crontab_mod:crontab-modify:ad
+6171:AUE_ftpd_logout:ftp logout:lo
+6172:AUE_ssh:login - ssh:lo
+6173:AUE_role_login:role login:lo
+6180:AUE_prof_cmd: profile command:ad
+6181:AUE_filesystem_add:add filesystem:ad
+6182:AUE_filesystem_delete:delete filesystem:ad
+6183:AUE_filesystem_modify:modify filesystem:ad
+6200:AUE_allocate_succ:allocate-device success:ot
+6201:AUE_allocate_fail:allocate-device failure:ot
+6202:AUE_deallocate_succ:deallocate-device success:ot
+6203:AUE_deallocate_fail:deallocate-device failure:ot
+6204:AUE_listdevice_succ:allocate-list devices success:ot
+6205:AUE_listdevice_fail:allocate-list devices failure:ot
+6207:AUE_create_user:create user:ad
+6208:AUE_modify_user:modify user:ad
+6209:AUE_delete_user:delete user:ad
+6210:AUE_disable_user:disable user:ad
+6211:AUE_enable_user:enable users:ad
+6212:AUE_newgrp_login:newgrp login:lo
+6213:AUE_admin_authenticate:admin login:lo
+6214:AUE_kadmind_auth:authenticated kadmind request:ua
+6215:AUE_kadmind_unauth:unauthenticated kadmind req:ua
+6216:AUE_krb5kdc_as_req:kdc authentication svc request:ap
+6217:AUE_krb5kdc_tgs_req:kdc tkt-grant svc request:ap
+6218:AUE_krb5kdc_tgs_req_2ndtktmm:kdc tgs 2ndtkt mismtch:ap
+6219:AUE_krb5kdc_tgs_req_alt_tgt:kdc tgs issue alt tgt:ap
+#
+# Historic Darwin use of low event numbering space, which collided with the
+# Solaris event space. Now obsoleted and new, higher, event numbers assigned
+# to make it easier to interpret Solaris events using the OpenBSM tools.
+#
+6171:AUE_DARWIN_audit_startup:audit startup:ad
+6172:AUE_DARWIN_audit_shutdown:audit shutdown:ad
+6300:AUE_DARWIN_sudo:sudo(1):ad
+6501:AUE_DARWIN_modify_password:modify password:ad
+6511:AUE_DARWIN_create_group:create group:ad
+6512:AUE_DARWIN_delete_group:delete group:ad
+6513:AUE_DARWIN_modify_group:modify group:ad
+6514:AUE_DARWIN_add_to_group:add to group:ad
+6515:AUE_DARWIN_remove_from_group:remove from group:ad
+6521:AUE_DARWIN_revoke_obj:revoke object priv:fm
+6600:AUE_DARWIN_lw_login:loginwindow login:lo
+6601:AUE_DARWIN_lw_logout:loginwindow logout:lo
+7000:AUE_DARWIN_auth_user:user authentication:aa
+7001:AUE_DARWIN_ssconn:SecSrvr connection setup:aa
+7002:AUE_DARWIN_ssauthorize:SecSrvr AuthEngine:aa
+7003:AUE_DARWIN_ssauthint:SecSrvr authinternal mech:aa
+#
+# Historic/third-party application allocations of event identifiers.
+#
+32800:AUE_openssh:OpenSSH login:lo
+#
+# OpenBSM-managed application event space.
+#
+45000:AUE_audit_startup:audit startup:ad
+45001:AUE_audit_shutdown:audit shutdown:ad
+45014:AUE_modify_password:modify password:ad
+45015:AUE_create_group:create group:ad
+45016:AUE_delete_group:delete group:ad
+45017:AUE_modify_group:modify group:ad
+45018:AUE_add_to_group:add to group:ad
+45019:AUE_remove_from_group:remove from group:ad
+45020:AUE_revoke_obj:revoke object priv:fm
+45021:AUE_lw_login:loginwindow login:lo
+45022:AUE_lw_logout:loginwindow logout:lo
+45023:AUE_auth_user:user authentication:aa
+45024:AUE_ssconn:SecSrvr connection setup:aa
+45025:AUE_ssauthorize:SecSrvr AuthEngine:aa
+45026:AUE_ssauthint:SecSrvr authinternal mech:aa
+45027:AUE_calife:Calife:ad
+45028:AUE_sudo:sudo(1):aa
+45029:AUE_audit_recovery:audit crash recovery:ad
+45030:AUE_ssauthmech:SecSrvr AuthMechanism:aa
Deleted: vendor/openbsm/1.2_alpha4/etc/audit_filter
===================================================================
--- vendor/openbsm/dist/etc/audit_filter 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/etc/audit_filter 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,5 +0,0 @@
-#
-# $P4: //depot/projects/trustedbsd/openbsm/etc/audit_filter#1 $
-#
-# modulename:various arguments here
-#
Copied: vendor/openbsm/1.2_alpha4/etc/audit_filter (from rev 11163, vendor/openbsm/dist/etc/audit_filter)
===================================================================
--- vendor/openbsm/1.2_alpha4/etc/audit_filter (rev 0)
+++ vendor/openbsm/1.2_alpha4/etc/audit_filter 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,5 @@
+#
+# $FreeBSD: stable/10/contrib/openbsm/etc/audit_filter 293161 2016-01-04 16:32:21Z brueffer $
+#
+# modulename:various arguments here
+#
Deleted: vendor/openbsm/1.2_alpha4/etc/audit_user
===================================================================
--- vendor/openbsm/dist/etc/audit_user 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/etc/audit_user 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,5 +0,0 @@
-#
-# $P4: //depot/projects/trustedbsd/openbsm/etc/audit_user#3 $
-# $FreeBSD: src/contrib/openbsm/etc/audit_user,v 1.2 2006/03/26 01:44:35 rwatson Exp $
-#
-root:lo:no
Copied: vendor/openbsm/1.2_alpha4/etc/audit_user (from rev 11163, vendor/openbsm/dist/etc/audit_user)
===================================================================
--- vendor/openbsm/1.2_alpha4/etc/audit_user (rev 0)
+++ vendor/openbsm/1.2_alpha4/etc/audit_user 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,4 @@
+#
+# $FreeBSD: stable/10/contrib/openbsm/etc/audit_user 293161 2016-01-04 16:32:21Z brueffer $
+#
+root:lo:no
Deleted: vendor/openbsm/1.2_alpha4/etc/audit_warn
===================================================================
--- vendor/openbsm/dist/etc/audit_warn 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/etc/audit_warn 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,6 +0,0 @@
-#!/bin/sh
-#
-# $P4: //depot/projects/trustedbsd/openbsm/etc/audit_warn#3 $
-# $FreeBSD: src/contrib/openbsm/etc/audit_warn,v 1.2 2006/03/26 01:44:35 rwatson Exp $
-#
-logger -p security.warning "audit warning: $@"
Copied: vendor/openbsm/1.2_alpha4/etc/audit_warn (from rev 11163, vendor/openbsm/dist/etc/audit_warn)
===================================================================
--- vendor/openbsm/1.2_alpha4/etc/audit_warn (rev 0)
+++ vendor/openbsm/1.2_alpha4/etc/audit_warn 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,6 @@
+#!/bin/sh
+#
+# $FreeBSD: stable/10/contrib/openbsm/etc/audit_warn 293161 2016-01-04 16:32:21Z brueffer $
+#
+
+logger -p security.warning "audit warning: $@"
Deleted: vendor/openbsm/1.2_alpha4/libbsm/Makefile.am
===================================================================
--- vendor/openbsm/dist/libbsm/Makefile.am 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/libbsm/Makefile.am 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,37 +0,0 @@
-#
-# $P4: //depot/projects/trustedbsd/openbsm/libbsm/Makefile.am#3 $
-#
-
-INCLUDES = -I$(top_srcdir)
-
-lib_LTLIBRARIES = libbsm.la
-
-libbsm_la_SOURCES = \
- bsm_audit.c \
- bsm_class.c \
- bsm_control.c \
- bsm_event.c \
- bsm_flags.c \
- bsm_io.c \
- bsm_mask.c \
- bsm_token.c \
- bsm_user.c
-
-if HAVE_AUDIT_SYSCALLS
-libbsm_la_SOURCES += \
- bsm_notify.c \
- bsm_wrappers.c
-endif
-
-man3_MANS = \
- au_class.3 \
- au_control.3 \
- au_event.3 \
- au_free_token.3 \
- au_io.3 \
- au_mask.3 \
- au_open.3 \
- au_token.3 \
- au_user.3 \
- libbsm.3
-
Copied: vendor/openbsm/1.2_alpha4/libbsm/Makefile.am (from rev 11163, vendor/openbsm/dist/libbsm/Makefile.am)
===================================================================
--- vendor/openbsm/1.2_alpha4/libbsm/Makefile.am (rev 0)
+++ vendor/openbsm/1.2_alpha4/libbsm/Makefile.am 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,157 @@
+if USE_NATIVE_INCLUDES
+INCLUDES = -I$(top_builddir) -I$(top_srcdir)
+else
+INCLUDES = -I$(top_builddir) -I$(top_srcdir) -I$(top_srcdir)/sys
+endif
+
+lib_LTLIBRARIES = libbsm.la
+
+libbsm_la_SOURCES = \
+ bsm_audit.c \
+ bsm_class.c \
+ bsm_control.c \
+ bsm_domain.c \
+ bsm_errno.c \
+ bsm_event.c \
+ bsm_fcntl.c \
+ bsm_flags.c \
+ bsm_io.c \
+ bsm_mask.c \
+ bsm_socket_type.c \
+ bsm_token.c \
+ bsm_user.c
+
+if HAVE_AUDIT_SYSCALLS
+libbsm_la_SOURCES += \
+ bsm_notify.c \
+ bsm_wrappers.c
+endif
+
+man3_MANS = \
+ au_class.3 \
+ au_control.3 \
+ au_domain.3 \
+ au_errno.3 \
+ au_event.3 \
+ au_fcntl_cmd.3 \
+ au_free_token.3 \
+ au_io.3 \
+ au_mask.3 \
+ au_notify.3 \
+ au_open.3 \
+ au_socket_type.3 \
+ au_token.3 \
+ au_user.3 \
+ libbsm.3
+
+install-exec-hook:
+ cd $(DESTDIR)$(mandir) && \
+ $(LN_S) -f au_class.3 getauclassent.3 && \
+ $(LN_S) -f au_class.3 getauclassent_r.3 && \
+ $(LN_S) -f au_class.3 getauclassnam.3 && \
+ $(LN_S) -f au_class.3 getauclassnam_r.3 && \
+ $(LN_S) -f au_class.3 setauclass.3 && \
+ $(LN_S) -f au_class.3 endauclass.3 && \
+ $(LN_S) -f au_control.3 setac.3 && \
+ $(LN_S) -f au_control.3 endac.3 && \
+ $(LN_S) -f au_control.3 getacdir.3 && \
+ $(LN_S) -f au_control.3 getacdist.3 && \
+ $(LN_S) -f au_control.3 getacexpire.3 && \
+ $(LN_S) -f au_control.3 getacfilesz.3 && \
+ $(LN_S) -f au_control.3 getacflg.3 && \
+ $(LN_S) -f au_control.3 getachost.3 && \
+ $(LN_S) -f au_control.3 getacmin.3 && \
+ $(LN_S) -f au_control.3 getacna.3 && \
+ $(LN_S) -f au_control.3 getacpol.3 && \
+ $(LN_S) -f au_control.3 au_poltostr.3 && \
+ $(LN_S) -f au_control.3 ac_strtopol.3 && \
+ $(LN_S) -f au_domain.3 au_bsm_to_domain.3 && \
+ $(LN_S) -f au_domain.3 au_domain_to_bsm.3 && \
+ $(LN_S) -f au_errno.3 au_bsm_to_errno.3 && \
+ $(LN_S) -f au_errno.3 au_errno_to_bsm.3 && \
+ $(LN_S) -f au_errno.3 au_strerror.3 && \
+ $(LN_S) -f au_event.3 setauevent.3 && \
+ $(LN_S) -f au_event.3 endauevent.3 && \
+ $(LN_S) -f au_event.3 getauevent.3 && \
+ $(LN_S) -f au_event.3 getauevent_r.3 && \
+ $(LN_S) -f au_event.3 getauevnam.3 && \
+ $(LN_S) -f au_event.3 getauevnam_r.3 && \
+ $(LN_S) -f au_event.3 getauevnum.3 && \
+ $(LN_S) -f au_event.3 getauevnum_r.3 && \
+ $(LN_S) -f au_event.3 getauevnonam.3 && \
+ $(LN_S) -f au_event.3 getauevnonam_r.3 && \
+ $(LN_S) -f au_fcntl.3 au_bsm_to_fcntl_cmd.3 && \
+ $(LN_S) -f au_fcntl.3 au_fcntl_cmd_to_bsm.3 && \
+ $(LN_S) -f au_io.3 au_fetch_tok.3 && \
+ $(LN_S) -f au_io.3 au_print_tok.3 && \
+ $(LN_S) -f au_io.3 au_print_flags_tok.3 && \
+ $(LN_S) -f au_io.3 au_read_rec.3 && \
+ $(LN_S) -f au_mask.3 au_preselect.3 && \
+ $(LN_S) -f au_mask.3 getauditflagsbin.3 && \
+ $(LN_S) -f au_mask.3 getauditflagschar.3 && \
+ $(LN_S) -f au_notify.3 au_get_state.3 && \
+ $(LN_S) -f au_notify.3 au_notify_initialize.3 && \
+ $(LN_S) -f au_notify.3 au_notify_terminate.3 && \
+ $(LN_S) -f au_open.3 au_open.3 && \
+ $(LN_S) -f au_open.3 au_write.3 && \
+ $(LN_S) -f au_open.3 au_close.3 && \
+ $(LN_S) -f au_open.3 au_close_buffer.3 && \
+ $(LN_S) -f au_open.3 au_close_token.3 && \
+ $(LN_S) -f au_socket_type.3 au_bsm_to_socket_type.3 && \
+ $(LN_S) -f au_socket_type.3 au_socket_type_to_bsm.3 && \
+ $(LN_S) -f au_token.3 au_to_arg32.3 && \
+ $(LN_S) -f au_token.3 au_to_arg64.3 && \
+ $(LN_S) -f au_token.3 au_to_arg.3 && \
+ $(LN_S) -f au_token.3 au_to_attr64.3 && \
+ $(LN_S) -f au_token.3 au_to_data.3 && \
+ $(LN_S) -f au_token.3 au_to_exit.3 && \
+ $(LN_S) -f au_token.3 au_to_groups.3 && \
+ $(LN_S) -f au_token.3 au_to_newgroups.3 && \
+ $(LN_S) -f au_token.3 au_to_in_addr.3 && \
+ $(LN_S) -f au_token.3 au_to_in_addr_ex.3 && \
+ $(LN_S) -f au_token.3 au_to_ip.3 && \
+ $(LN_S) -f au_token.3 au_to_ipc.3 && \
+ $(LN_S) -f au_token.3 au_to_ipc_perm.3 && \
+ $(LN_S) -f au_token.3 au_to_iport.3 && \
+ $(LN_S) -f au_token.3 au_to_opaque.3 && \
+ $(LN_S) -f au_token.3 au_to_file.3 && \
+ $(LN_S) -f au_token.3 au_to_text.3 && \
+ $(LN_S) -f au_token.3 au_to_path.3 && \
+ $(LN_S) -f au_token.3 au_to_process32.3 && \
+ $(LN_S) -f au_token.3 au_to_process64.3 && \
+ $(LN_S) -f au_token.3 au_to_process.3 && \
+ $(LN_S) -f au_token.3 au_to_process32_ex.3 && \
+ $(LN_S) -f au_token.3 au_to_process64_ex.3 && \
+ $(LN_S) -f au_token.3 au_to_process_ex.3 && \
+ $(LN_S) -f au_token.3 au_to_return32.3 && \
+ $(LN_S) -f au_token.3 au_to_return64.3 && \
+ $(LN_S) -f au_token.3 au_to_return.3 && \
+ $(LN_S) -f au_token.3 au_to_seq.3 && \
+ $(LN_S) -f au_token.3 au_to_sock_inet32.3 && \
+ $(LN_S) -f au_token.3 au_to_sock_inet128.3 && \
+ $(LN_S) -f au_token.3 au_to_sock_inet.3 && \
+ $(LN_S) -f au_token.3 au_to_socket_ex.3 && \
+ $(LN_S) -f au_token.3 au_to_subject32.3 && \
+ $(LN_S) -f au_token.3 au_to_subject64.3 && \
+ $(LN_S) -f au_token.3 au_to_subject.3 && \
+ $(LN_S) -f au_token.3 au_to_subject32_ex.3 && \
+ $(LN_S) -f au_token.3 au_to_subject64_ex.3 && \
+ $(LN_S) -f au_token.3 au_to_subject_ex.3 && \
+ $(LN_S) -f au_token.3 au_to_me.3 && \
+ $(LN_S) -f au_token.3 au_to_exec_args.3 && \
+ $(LN_S) -f au_token.3 au_to_exec_env.3 && \
+ $(LN_S) -f au_token.3 au_to_header.3 && \
+ $(LN_S) -f au_token.3 au_to_header32.3 && \
+ $(LN_S) -f au_token.3 au_to_header64.3 && \
+ $(LN_S) -f au_token.3 au_to_header_ex.3 && \
+ $(LN_S) -f au_token.3 au_to_header32_ex.3 && \
+ $(LN_S) -f au_token.3 au_to_trailer.3 && \
+ $(LN_S) -f au_token.3 au_to_zonename.3 && \
+ $(LN_S) -f au_user.3 setauuser.3 && \
+ $(LN_S) -f au_user.3 endauuser.3 && \
+ $(LN_S) -f au_user.3 getauuserent.3 && \
+ $(LN_S) -f au_user.3 getauuserent_r.3 && \
+ $(LN_S) -f au_user.3 getauusernam.3 && \
+ $(LN_S) -f au_user.3 getauusernam_r.3 && \
+ $(LN_S) -f au_user.3 au_user_mask.3 && \
+ $(LN_S) -f au_user.3 getfauditflags.3
Deleted: vendor/openbsm/1.2_alpha4/libbsm/Makefile.in
===================================================================
--- vendor/openbsm/dist/libbsm/Makefile.in 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/libbsm/Makefile.in 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,553 +0,0 @@
-# Makefile.in generated by automake 1.10 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
- at SET_MAKE@
-
-#
-# $P4: //depot/projects/trustedbsd/openbsm/libbsm/Makefile.in#5 $
-#
-
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
- at HAVE_AUDIT_SYSCALLS_TRUE@am__append_1 = \
- at HAVE_AUDIT_SYSCALLS_TRUE@ bsm_notify.c \
- at HAVE_AUDIT_SYSCALLS_TRUE@ bsm_wrappers.c
-
-subdir = libbsm
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/config/config.h
-CONFIG_CLEAN_FILES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
-am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(man3dir)"
-libLTLIBRARIES_INSTALL = $(INSTALL)
-LTLIBRARIES = $(lib_LTLIBRARIES)
-libbsm_la_LIBADD =
-am__libbsm_la_SOURCES_DIST = bsm_audit.c bsm_class.c bsm_control.c \
- bsm_event.c bsm_flags.c bsm_io.c bsm_mask.c bsm_token.c \
- bsm_user.c bsm_notify.c bsm_wrappers.c
- at HAVE_AUDIT_SYSCALLS_TRUE@am__objects_1 = bsm_notify.lo \
- at HAVE_AUDIT_SYSCALLS_TRUE@ bsm_wrappers.lo
-am_libbsm_la_OBJECTS = bsm_audit.lo bsm_class.lo bsm_control.lo \
- bsm_event.lo bsm_flags.lo bsm_io.lo bsm_mask.lo bsm_token.lo \
- bsm_user.lo $(am__objects_1)
-libbsm_la_OBJECTS = $(am_libbsm_la_OBJECTS)
-DEFAULT_INCLUDES = -I. -I$(top_builddir)/config at am__isrc@
-depcomp = $(SHELL) $(top_srcdir)/config/depcomp
-am__depfiles_maybe = depfiles
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
- $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
- --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
- $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
- --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
- $(LDFLAGS) -o $@
-SOURCES = $(libbsm_la_SOURCES)
-DIST_SOURCES = $(am__libbsm_la_SOURCES_DIST)
-man3dir = $(mandir)/man3
-NROFF = nroff
-MANS = $(man3_MANS)
-ETAGS = etags
-CTAGS = ctags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AMTAR = @AMTAR@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO = @ECHO@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-F77 = @F77@
-FFLAGS = @FFLAGS@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-VERSION = @VERSION@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-INCLUDES = -I$(top_srcdir)
-lib_LTLIBRARIES = libbsm.la
-libbsm_la_SOURCES = bsm_audit.c bsm_class.c bsm_control.c bsm_event.c \
- bsm_flags.c bsm_io.c bsm_mask.c bsm_token.c bsm_user.c \
- $(am__append_1)
-man3_MANS = \
- au_class.3 \
- au_control.3 \
- au_event.3 \
- au_free_token.3 \
- au_io.3 \
- au_mask.3 \
- au_open.3 \
- au_token.3 \
- au_user.3 \
- libbsm.3
-
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .c .lo .o .obj
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
- && exit 0; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign libbsm/Makefile'; \
- cd $(top_srcdir) && \
- $(AUTOMAKE) --foreign libbsm/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-install-libLTLIBRARIES: $(lib_LTLIBRARIES)
- @$(NORMAL_INSTALL)
- test -z "$(libdir)" || $(MKDIR_P) "$(DESTDIR)$(libdir)"
- @list='$(lib_LTLIBRARIES)'; for p in $$list; do \
- if test -f $$p; then \
- f=$(am__strip_dir) \
- echo " $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(libdir)/$$f'"; \
- $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(libdir)/$$f"; \
- else :; fi; \
- done
-
-uninstall-libLTLIBRARIES:
- @$(NORMAL_UNINSTALL)
- @list='$(lib_LTLIBRARIES)'; for p in $$list; do \
- p=$(am__strip_dir) \
- echo " $(LIBTOOL) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$p'"; \
- $(LIBTOOL) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$p"; \
- done
-
-clean-libLTLIBRARIES:
- -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
- @list='$(lib_LTLIBRARIES)'; for p in $$list; do \
- dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
- test "$$dir" != "$$p" || dir=.; \
- echo "rm -f \"$${dir}/so_locations\""; \
- rm -f "$${dir}/so_locations"; \
- done
-libbsm.la: $(libbsm_la_OBJECTS) $(libbsm_la_DEPENDENCIES)
- $(LINK) -rpath $(libdir) $(libbsm_la_OBJECTS) $(libbsm_la_LIBADD) $(LIBS)
-
-mostlyclean-compile:
- -rm -f *.$(OBJEXT)
-
-distclean-compile:
- -rm -f *.tab.c
-
- at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/bsm_audit.Plo at am__quote@
- at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/bsm_class.Plo at am__quote@
- at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/bsm_control.Plo at am__quote@
- at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/bsm_event.Plo at am__quote@
- at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/bsm_flags.Plo at am__quote@
- at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/bsm_io.Plo at am__quote@
- at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/bsm_mask.Plo at am__quote@
- at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/bsm_notify.Plo at am__quote@
- at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/bsm_token.Plo at am__quote@
- at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/bsm_user.Plo at am__quote@
- at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/bsm_wrappers.Plo at am__quote@
-
-.c.o:
- at am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
- at am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
- at AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
- at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
- at am__fastdepCC_FALSE@ $(COMPILE) -c $<
-
-.c.obj:
- at am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
- at am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
- at AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
- at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
- at am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
-
-.c.lo:
- at am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
- at am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
- at AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
- at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
- at am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $<
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-install-man3: $(man3_MANS) $(man_MANS)
- @$(NORMAL_INSTALL)
- test -z "$(man3dir)" || $(MKDIR_P) "$(DESTDIR)$(man3dir)"
- @list='$(man3_MANS) $(dist_man3_MANS) $(nodist_man3_MANS)'; \
- l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
- for i in $$l2; do \
- case "$$i" in \
- *.3*) list="$$list $$i" ;; \
- esac; \
- done; \
- for i in $$list; do \
- if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
- else file=$$i; fi; \
- ext=`echo $$i | sed -e 's/^.*\\.//'`; \
- case "$$ext" in \
- 3*) ;; \
- *) ext='3' ;; \
- esac; \
- inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
- inst=`echo $$inst | sed -e 's/^.*\///'`; \
- inst=`echo $$inst | sed '$(transform)'`.$$ext; \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man3dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man3dir)/$$inst"; \
- done
-uninstall-man3:
- @$(NORMAL_UNINSTALL)
- @list='$(man3_MANS) $(dist_man3_MANS) $(nodist_man3_MANS)'; \
- l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
- for i in $$l2; do \
- case "$$i" in \
- *.3*) list="$$list $$i" ;; \
- esac; \
- done; \
- for i in $$list; do \
- ext=`echo $$i | sed -e 's/^.*\\.//'`; \
- case "$$ext" in \
- 3*) ;; \
- *) ext='3' ;; \
- esac; \
- inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
- inst=`echo $$inst | sed -e 's/^.*\///'`; \
- inst=`echo $$inst | sed '$(transform)'`.$$ext; \
- echo " rm -f '$(DESTDIR)$(man3dir)/$$inst'"; \
- rm -f "$(DESTDIR)$(man3dir)/$$inst"; \
- done
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- mkid -fID $$unique
-tags: TAGS
-
-TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
- test -n "$$unique" || unique=$$empty_fix; \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$tags $$unique; \
- fi
-ctags: CTAGS
-CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(CTAGS_ARGS)$$tags$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$tags $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && cd $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) $$here
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
- fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
- else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(LTLIBRARIES) $(MANS)
-installdirs:
- for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(man3dir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic clean-libLTLIBRARIES clean-libtool \
- mostlyclean-am
-
-distclean: distclean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
- distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-info: info-am
-
-info-am:
-
-install-data-am: install-man
-
-install-dvi: install-dvi-am
-
-install-exec-am: install-libLTLIBRARIES
-
-install-html: install-html-am
-
-install-info: install-info-am
-
-install-man: install-man3
-
-install-pdf: install-pdf-am
-
-install-ps: install-ps-am
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic \
- mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-libLTLIBRARIES uninstall-man
-
-uninstall-man: uninstall-man3
-
-.MAKE: install-am install-strip
-
-.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
- clean-libLTLIBRARIES clean-libtool ctags distclean \
- distclean-compile distclean-generic distclean-libtool \
- distclean-tags distdir dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am \
- install-libLTLIBRARIES install-man install-man3 install-pdf \
- install-pdf-am install-ps install-ps-am install-strip \
- installcheck installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-compile \
- mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
- tags uninstall uninstall-am uninstall-libLTLIBRARIES \
- uninstall-man uninstall-man3
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
Copied: vendor/openbsm/1.2_alpha4/libbsm/Makefile.in (from rev 11163, vendor/openbsm/dist/libbsm/Makefile.in)
===================================================================
--- vendor/openbsm/1.2_alpha4/libbsm/Makefile.in (rev 0)
+++ vendor/openbsm/1.2_alpha4/libbsm/Makefile.in 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,792 @@
+# Makefile.in generated by automake 1.12.2 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2012 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+ at SET_MAKE@
+
+VPATH = @srcdir@
+am__make_dryrun = \
+ { \
+ am__dry=no; \
+ case $$MAKEFLAGS in \
+ *\\[\ \ ]*) \
+ echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
+ | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+ *) \
+ for am__flg in $$MAKEFLAGS; do \
+ case $$am__flg in \
+ *=*|--*) ;; \
+ *n*) am__dry=yes; break;; \
+ esac; \
+ done;; \
+ esac; \
+ test $$am__dry = yes; \
+ }
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+ at HAVE_AUDIT_SYSCALLS_TRUE@am__append_1 = \
+ at HAVE_AUDIT_SYSCALLS_TRUE@ bsm_notify.c \
+ at HAVE_AUDIT_SYSCALLS_TRUE@ bsm_wrappers.c
+
+subdir = libbsm
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
+ $(top_srcdir)/config/depcomp
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+ *) f=$$p;; \
+ esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+ if (++n[$$2] == $(am__install_max)) \
+ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+ END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+ test -z "$$files" \
+ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+ $(am__cd) "$$dir" && rm -f $$files; }; \
+ }
+am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(man3dir)"
+LTLIBRARIES = $(lib_LTLIBRARIES)
+libbsm_la_LIBADD =
+am__libbsm_la_SOURCES_DIST = bsm_audit.c bsm_class.c bsm_control.c \
+ bsm_domain.c bsm_errno.c bsm_event.c bsm_fcntl.c bsm_flags.c \
+ bsm_io.c bsm_mask.c bsm_socket_type.c bsm_token.c bsm_user.c \
+ bsm_notify.c bsm_wrappers.c
+ at HAVE_AUDIT_SYSCALLS_TRUE@am__objects_1 = bsm_notify.lo \
+ at HAVE_AUDIT_SYSCALLS_TRUE@ bsm_wrappers.lo
+am_libbsm_la_OBJECTS = bsm_audit.lo bsm_class.lo bsm_control.lo \
+ bsm_domain.lo bsm_errno.lo bsm_event.lo bsm_fcntl.lo \
+ bsm_flags.lo bsm_io.lo bsm_mask.lo bsm_socket_type.lo \
+ bsm_token.lo bsm_user.lo $(am__objects_1)
+libbsm_la_OBJECTS = $(am_libbsm_la_OBJECTS)
+DEFAULT_INCLUDES = -I. at am__isrc@ -I$(top_builddir)/config
+depcomp = $(SHELL) $(top_srcdir)/config/depcomp
+am__depfiles_maybe = depfiles
+am__mv = mv -f
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+ --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+ --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
+ $(LDFLAGS) -o $@
+SOURCES = $(libbsm_la_SOURCES)
+DIST_SOURCES = $(am__libbsm_la_SOURCES_DIST)
+am__can_run_installinfo = \
+ case $$AM_UPDATE_INFO_DIR in \
+ n|no|NO) false;; \
+ *) (install-info --version) >/dev/null 2>&1;; \
+ esac
+man3dir = $(mandir)/man3
+NROFF = nroff
+MANS = $(man3_MANS)
+ETAGS = etags
+CTAGS = ctags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LEX = @LEX@
+LEXLIB = @LEXLIB@
+LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MIG = @MIG@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+VERSION = @VERSION@
+YACC = @YACC@
+YFLAGS = @YFLAGS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+ at USE_NATIVE_INCLUDES_FALSE@INCLUDES = -I$(top_builddir) -I$(top_srcdir) -I$(top_srcdir)/sys
+ at USE_NATIVE_INCLUDES_TRUE@INCLUDES = -I$(top_builddir) -I$(top_srcdir)
+lib_LTLIBRARIES = libbsm.la
+libbsm_la_SOURCES = bsm_audit.c bsm_class.c bsm_control.c bsm_domain.c \
+ bsm_errno.c bsm_event.c bsm_fcntl.c bsm_flags.c bsm_io.c \
+ bsm_mask.c bsm_socket_type.c bsm_token.c bsm_user.c \
+ $(am__append_1)
+man3_MANS = \
+ au_class.3 \
+ au_control.3 \
+ au_domain.3 \
+ au_errno.3 \
+ au_event.3 \
+ au_fcntl_cmd.3 \
+ au_free_token.3 \
+ au_io.3 \
+ au_mask.3 \
+ au_notify.3 \
+ au_open.3 \
+ au_socket_type.3 \
+ au_token.3 \
+ au_user.3 \
+ libbsm.3
+
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .lo .o .obj
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+ && { if test -f $@; then exit 0; else break; fi; }; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign libbsm/Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --foreign libbsm/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+install-libLTLIBRARIES: $(lib_LTLIBRARIES)
+ @$(NORMAL_INSTALL)
+ @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
+ list2=; for p in $$list; do \
+ if test -f $$p; then \
+ list2="$$list2 $$p"; \
+ else :; fi; \
+ done; \
+ test -z "$$list2" || { \
+ echo " $(MKDIR_P) '$(DESTDIR)$(libdir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(libdir)" || exit 1; \
+ echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \
+ $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \
+ }
+
+uninstall-libLTLIBRARIES:
+ @$(NORMAL_UNINSTALL)
+ @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
+ for p in $$list; do \
+ $(am__strip_dir) \
+ echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \
+ $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \
+ done
+
+clean-libLTLIBRARIES:
+ -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
+ @list='$(lib_LTLIBRARIES)'; \
+ locs=`for p in $$list; do echo $$p; done | \
+ sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \
+ sort -u`; \
+ test -z "$$locs" || { \
+ echo rm -f $${locs}; \
+ rm -f $${locs}; \
+ }
+libbsm.la: $(libbsm_la_OBJECTS) $(libbsm_la_DEPENDENCIES) $(EXTRA_libbsm_la_DEPENDENCIES)
+ $(LINK) -rpath $(libdir) $(libbsm_la_OBJECTS) $(libbsm_la_LIBADD) $(LIBS)
+
+mostlyclean-compile:
+ -rm -f *.$(OBJEXT)
+
+distclean-compile:
+ -rm -f *.tab.c
+
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/bsm_audit.Plo at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/bsm_class.Plo at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/bsm_control.Plo at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/bsm_domain.Plo at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/bsm_errno.Plo at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/bsm_event.Plo at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/bsm_fcntl.Plo at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/bsm_flags.Plo at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/bsm_io.Plo at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/bsm_mask.Plo at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/bsm_notify.Plo at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/bsm_socket_type.Plo at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/bsm_token.Plo at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/bsm_user.Plo at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/bsm_wrappers.Plo at am__quote@
+
+.c.o:
+ at am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+ at am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ at am__fastdepCC_FALSE@ $(COMPILE) -c $<
+
+.c.obj:
+ at am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+ at am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ at am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
+
+.c.lo:
+ at am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+ at am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ at am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $<
+
+mostlyclean-libtool:
+ -rm -f *.lo
+
+clean-libtool:
+ -rm -rf .libs _libs
+install-man3: $(man3_MANS)
+ @$(NORMAL_INSTALL)
+ @list1='$(man3_MANS)'; \
+ list2=''; \
+ test -n "$(man3dir)" \
+ && test -n "`echo $$list1$$list2`" \
+ || exit 0; \
+ echo " $(MKDIR_P) '$(DESTDIR)$(man3dir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(man3dir)" || exit 1; \
+ { for i in $$list1; do echo "$$i"; done; \
+ if test -n "$$list2"; then \
+ for i in $$list2; do echo "$$i"; done \
+ | sed -n '/\.3[a-z]*$$/p'; \
+ fi; \
+ } | while read p; do \
+ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; echo "$$p"; \
+ done | \
+ sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^3][0-9a-z]*$$,3,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+ sed 'N;N;s,\n, ,g' | { \
+ list=; while read file base inst; do \
+ if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man3dir)/$$inst'"; \
+ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man3dir)/$$inst" || exit $$?; \
+ fi; \
+ done; \
+ for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+ while read files; do \
+ test -z "$$files" || { \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man3dir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(man3dir)" || exit $$?; }; \
+ done; }
+
+uninstall-man3:
+ @$(NORMAL_UNINSTALL)
+ @list='$(man3_MANS)'; test -n "$(man3dir)" || exit 0; \
+ files=`{ for i in $$list; do echo "$$i"; done; \
+ } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^3][0-9a-z]*$$,3,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+ dir='$(DESTDIR)$(man3dir)'; $(am__uninstall_files_from_dir)
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ set x; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ shift; \
+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ if test $$# -gt 0; then \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ "$$@" $$unique; \
+ else \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$unique; \
+ fi; \
+ fi
+ctags: CTAGS
+CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ test -z "$(CTAGS_ARGS)$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && $(am__cd) $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) "$$here"
+
+cscopelist: $(HEADERS) $(SOURCES) $(LISP)
+ list='$(SOURCES) $(HEADERS) $(LISP)'; \
+ case "$(srcdir)" in \
+ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+ *) sdir=$(subdir)/$(srcdir) ;; \
+ esac; \
+ for i in $$list; do \
+ if test -f "$$i"; then \
+ echo "$(subdir)/$$i"; \
+ else \
+ echo "$$sdir/$$i"; \
+ fi; \
+ done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+ @list='$(MANS)'; if test -n "$$list"; then \
+ list=`for p in $$list; do \
+ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+ if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
+ if test -n "$$list" && \
+ grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
+ echo "error: found man pages containing the 'missing help2man' replacement text:" >&2; \
+ grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \
+ echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \
+ echo " typically 'make maintainer-clean' will remove them" >&2; \
+ exit 1; \
+ else :; fi; \
+ else :; fi
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+ else \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+check: check-am
+all-am: Makefile $(LTLIBRARIES) $(MANS)
+installdirs:
+ for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(man3dir)"; do \
+ test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+ done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+ if test -z '$(STRIP)'; then \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ install; \
+ else \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+ fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libLTLIBRARIES clean-libtool \
+ mostlyclean-am
+
+distclean: distclean-am
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+ distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-man
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am: install-libLTLIBRARIES
+ @$(NORMAL_INSTALL)
+ $(MAKE) $(AM_MAKEFLAGS) install-exec-hook
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man: install-man3
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+ mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-libLTLIBRARIES uninstall-man
+
+uninstall-man: uninstall-man3
+
+.MAKE: install-am install-exec-am install-strip
+
+.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
+ clean-libLTLIBRARIES clean-libtool cscopelist ctags distclean \
+ distclean-compile distclean-generic distclean-libtool \
+ distclean-tags distdir dvi dvi-am html html-am info info-am \
+ install install-am install-data install-data-am install-dvi \
+ install-dvi-am install-exec install-exec-am install-exec-hook \
+ install-html install-html-am install-info install-info-am \
+ install-libLTLIBRARIES install-man install-man3 install-pdf \
+ install-pdf-am install-ps install-ps-am install-strip \
+ installcheck installcheck-am installdirs maintainer-clean \
+ maintainer-clean-generic mostlyclean mostlyclean-compile \
+ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+ tags uninstall uninstall-am uninstall-libLTLIBRARIES \
+ uninstall-man uninstall-man3
+
+
+install-exec-hook:
+ cd $(DESTDIR)$(mandir) && \
+ $(LN_S) -f au_class.3 getauclassent.3 && \
+ $(LN_S) -f au_class.3 getauclassent_r.3 && \
+ $(LN_S) -f au_class.3 getauclassnam.3 && \
+ $(LN_S) -f au_class.3 getauclassnam_r.3 && \
+ $(LN_S) -f au_class.3 setauclass.3 && \
+ $(LN_S) -f au_class.3 endauclass.3 && \
+ $(LN_S) -f au_control.3 setac.3 && \
+ $(LN_S) -f au_control.3 endac.3 && \
+ $(LN_S) -f au_control.3 getacdir.3 && \
+ $(LN_S) -f au_control.3 getacdist.3 && \
+ $(LN_S) -f au_control.3 getacexpire.3 && \
+ $(LN_S) -f au_control.3 getacfilesz.3 && \
+ $(LN_S) -f au_control.3 getacflg.3 && \
+ $(LN_S) -f au_control.3 getachost.3 && \
+ $(LN_S) -f au_control.3 getacmin.3 && \
+ $(LN_S) -f au_control.3 getacna.3 && \
+ $(LN_S) -f au_control.3 getacpol.3 && \
+ $(LN_S) -f au_control.3 au_poltostr.3 && \
+ $(LN_S) -f au_control.3 ac_strtopol.3 && \
+ $(LN_S) -f au_domain.3 au_bsm_to_domain.3 && \
+ $(LN_S) -f au_domain.3 au_domain_to_bsm.3 && \
+ $(LN_S) -f au_errno.3 au_bsm_to_errno.3 && \
+ $(LN_S) -f au_errno.3 au_errno_to_bsm.3 && \
+ $(LN_S) -f au_errno.3 au_strerror.3 && \
+ $(LN_S) -f au_event.3 setauevent.3 && \
+ $(LN_S) -f au_event.3 endauevent.3 && \
+ $(LN_S) -f au_event.3 getauevent.3 && \
+ $(LN_S) -f au_event.3 getauevent_r.3 && \
+ $(LN_S) -f au_event.3 getauevnam.3 && \
+ $(LN_S) -f au_event.3 getauevnam_r.3 && \
+ $(LN_S) -f au_event.3 getauevnum.3 && \
+ $(LN_S) -f au_event.3 getauevnum_r.3 && \
+ $(LN_S) -f au_event.3 getauevnonam.3 && \
+ $(LN_S) -f au_event.3 getauevnonam_r.3 && \
+ $(LN_S) -f au_fcntl.3 au_bsm_to_fcntl_cmd.3 && \
+ $(LN_S) -f au_fcntl.3 au_fcntl_cmd_to_bsm.3 && \
+ $(LN_S) -f au_io.3 au_fetch_tok.3 && \
+ $(LN_S) -f au_io.3 au_print_tok.3 && \
+ $(LN_S) -f au_io.3 au_print_flags_tok.3 && \
+ $(LN_S) -f au_io.3 au_read_rec.3 && \
+ $(LN_S) -f au_mask.3 au_preselect.3 && \
+ $(LN_S) -f au_mask.3 getauditflagsbin.3 && \
+ $(LN_S) -f au_mask.3 getauditflagschar.3 && \
+ $(LN_S) -f au_notify.3 au_get_state.3 && \
+ $(LN_S) -f au_notify.3 au_notify_initialize.3 && \
+ $(LN_S) -f au_notify.3 au_notify_terminate.3 && \
+ $(LN_S) -f au_open.3 au_open.3 && \
+ $(LN_S) -f au_open.3 au_write.3 && \
+ $(LN_S) -f au_open.3 au_close.3 && \
+ $(LN_S) -f au_open.3 au_close_buffer.3 && \
+ $(LN_S) -f au_open.3 au_close_token.3 && \
+ $(LN_S) -f au_socket_type.3 au_bsm_to_socket_type.3 && \
+ $(LN_S) -f au_socket_type.3 au_socket_type_to_bsm.3 && \
+ $(LN_S) -f au_token.3 au_to_arg32.3 && \
+ $(LN_S) -f au_token.3 au_to_arg64.3 && \
+ $(LN_S) -f au_token.3 au_to_arg.3 && \
+ $(LN_S) -f au_token.3 au_to_attr64.3 && \
+ $(LN_S) -f au_token.3 au_to_data.3 && \
+ $(LN_S) -f au_token.3 au_to_exit.3 && \
+ $(LN_S) -f au_token.3 au_to_groups.3 && \
+ $(LN_S) -f au_token.3 au_to_newgroups.3 && \
+ $(LN_S) -f au_token.3 au_to_in_addr.3 && \
+ $(LN_S) -f au_token.3 au_to_in_addr_ex.3 && \
+ $(LN_S) -f au_token.3 au_to_ip.3 && \
+ $(LN_S) -f au_token.3 au_to_ipc.3 && \
+ $(LN_S) -f au_token.3 au_to_ipc_perm.3 && \
+ $(LN_S) -f au_token.3 au_to_iport.3 && \
+ $(LN_S) -f au_token.3 au_to_opaque.3 && \
+ $(LN_S) -f au_token.3 au_to_file.3 && \
+ $(LN_S) -f au_token.3 au_to_text.3 && \
+ $(LN_S) -f au_token.3 au_to_path.3 && \
+ $(LN_S) -f au_token.3 au_to_process32.3 && \
+ $(LN_S) -f au_token.3 au_to_process64.3 && \
+ $(LN_S) -f au_token.3 au_to_process.3 && \
+ $(LN_S) -f au_token.3 au_to_process32_ex.3 && \
+ $(LN_S) -f au_token.3 au_to_process64_ex.3 && \
+ $(LN_S) -f au_token.3 au_to_process_ex.3 && \
+ $(LN_S) -f au_token.3 au_to_return32.3 && \
+ $(LN_S) -f au_token.3 au_to_return64.3 && \
+ $(LN_S) -f au_token.3 au_to_return.3 && \
+ $(LN_S) -f au_token.3 au_to_seq.3 && \
+ $(LN_S) -f au_token.3 au_to_sock_inet32.3 && \
+ $(LN_S) -f au_token.3 au_to_sock_inet128.3 && \
+ $(LN_S) -f au_token.3 au_to_sock_inet.3 && \
+ $(LN_S) -f au_token.3 au_to_socket_ex.3 && \
+ $(LN_S) -f au_token.3 au_to_subject32.3 && \
+ $(LN_S) -f au_token.3 au_to_subject64.3 && \
+ $(LN_S) -f au_token.3 au_to_subject.3 && \
+ $(LN_S) -f au_token.3 au_to_subject32_ex.3 && \
+ $(LN_S) -f au_token.3 au_to_subject64_ex.3 && \
+ $(LN_S) -f au_token.3 au_to_subject_ex.3 && \
+ $(LN_S) -f au_token.3 au_to_me.3 && \
+ $(LN_S) -f au_token.3 au_to_exec_args.3 && \
+ $(LN_S) -f au_token.3 au_to_exec_env.3 && \
+ $(LN_S) -f au_token.3 au_to_header.3 && \
+ $(LN_S) -f au_token.3 au_to_header32.3 && \
+ $(LN_S) -f au_token.3 au_to_header64.3 && \
+ $(LN_S) -f au_token.3 au_to_header_ex.3 && \
+ $(LN_S) -f au_token.3 au_to_header32_ex.3 && \
+ $(LN_S) -f au_token.3 au_to_trailer.3 && \
+ $(LN_S) -f au_token.3 au_to_zonename.3 && \
+ $(LN_S) -f au_user.3 setauuser.3 && \
+ $(LN_S) -f au_user.3 endauuser.3 && \
+ $(LN_S) -f au_user.3 getauuserent.3 && \
+ $(LN_S) -f au_user.3 getauuserent_r.3 && \
+ $(LN_S) -f au_user.3 getauusernam.3 && \
+ $(LN_S) -f au_user.3 getauusernam_r.3 && \
+ $(LN_S) -f au_user.3 au_user_mask.3 && \
+ $(LN_S) -f au_user.3 getfauditflags.3
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
Deleted: vendor/openbsm/1.2_alpha4/libbsm/au_class.3
===================================================================
--- vendor/openbsm/dist/libbsm/au_class.3 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/libbsm/au_class.3 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,120 +0,0 @@
-.\"-
-.\" Copyright (c) 2005-2006 Robert N. M. Watson
-.\" All rights reserved.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\" notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\" notice, this list of conditions and the following disclaimer in the
-.\" documentation and/or other materials provided with the distribution.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
-.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-.\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
-.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-.\" SUCH DAMAGE.
-.\"
-.\" $P4: //depot/projects/trustedbsd/openbsm/libbsm/au_class.3#6 $
-.\"
-.Dd April 19, 2005
-.Dt AU_CLASS 3
-.Os
-.Sh NAME
-.Nm getauclassent ,
-.Nm getauclassent_r ,
-.Nm getauclassnam ,
-.Nm getauclassnam_r ,
-.Nm setauclass ,
-.Nm endauclass
-.Nd "look up information from the audit_class database"
-.Sh LIBRARY
-.Lb libbsm
-.Sh SYNOPSIS
-.In bsm/libbsm.h
-.Ft "struct au_class_ent *"
-.Fn getauclassent void
-.Ft "struct au_class_ent *"
-.Fn getauclassent_r "struct au_class_ent *e"
-.Ft "struct au_class_ent *"
-.Fn getauclassnam "const char *name"
-.Ft "struct au_class_ent *"
-.Fn getauclassnam_r "struct au_class_ent *e" "const char *name"
-.Ft void
-.Fn setauclass void
-.Ft void
-.Fn endauclass void
-.Sh DESCRIPTION
-These interfaces may be used to look up information from the
-.Xr audit_class 5
-database, which describes audit event classes.
-Audit event classes are described by
-.Vt "struct au_class_ent" .
-.Pp
-The
-.Fn getauclassent
-function
-will return the next class found in the
-.Xr audit_class 5
-database, or the first if the function has not yet been called.
-.Dv NULL
-will be returned if no further records are available.
-.Pp
-The
-.Fn getauclassnam
-function
-looks up a class by name.
-.Dv NULL
-will be returned if no matching class can be found.
-.Pp
-The
-.Fn setauclass
-function
-resets the iterator through the
-.Xr audit_class 5
-database, causing the next call to
-.Fn getauclassent
-to start again from the beginning of the file.
-.Pp
-The
-.Fn endauclass
-function
-closes the
-.Xr audit_class 5
-database, if open.
-.Sh SEE ALSO
-.Xr libbsm 3 ,
-.Xr audit_class 5
-.Sh HISTORY
-The OpenBSM implementation was created by McAfee Research, the security
-division of McAfee Inc., under contract to Apple Computer, Inc., in 2004.
-It was subsequently adopted by the TrustedBSD Project as the foundation for
-the OpenBSM distribution.
-.Sh AUTHORS
-.An -nosplit
-This software was created by
-.An Robert Watson ,
-.An Wayne Salamon ,
-and
-.An Suresh Krishnaswamy
-for McAfee Research, the security research division of McAfee,
-Inc., under contract to Apple Computer, Inc.
-.Pp
-The Basic Security Module (BSM) interface to audit records and audit event
-stream format were defined by Sun Microsystems.
-.Sh BUGS
-These routines cannot currently distinguish between an entry not being found
-and an error accessing the database.
-The implementation should be changed to return an error via
-.Va errno
-when
-.Dv NULL
-is returned.
Copied: vendor/openbsm/1.2_alpha4/libbsm/au_class.3 (from rev 11163, vendor/openbsm/dist/libbsm/au_class.3)
===================================================================
--- vendor/openbsm/1.2_alpha4/libbsm/au_class.3 (rev 0)
+++ vendor/openbsm/1.2_alpha4/libbsm/au_class.3 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,118 @@
+.\"-
+.\" Copyright (c) 2005-2006 Robert N. M. Watson
+.\" All rights reserved.
+.\"
+.\" Redistribution and use in source and binary forms, with or without
+.\" modification, are permitted provided that the following conditions
+.\" are met:
+.\" 1. Redistributions of source code must retain the above copyright
+.\" notice, this list of conditions and the following disclaimer.
+.\" 2. Redistributions in binary form must reproduce the above copyright
+.\" notice, this list of conditions and the following disclaimer in the
+.\" documentation and/or other materials provided with the distribution.
+.\"
+.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+.\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+.\" SUCH DAMAGE.
+.\"
+.Dd April 19, 2005
+.Dt AU_CLASS 3
+.Os
+.Sh NAME
+.Nm getauclassent ,
+.Nm getauclassent_r ,
+.Nm getauclassnam ,
+.Nm getauclassnam_r ,
+.Nm setauclass ,
+.Nm endauclass
+.Nd "look up information from the audit_class database"
+.Sh LIBRARY
+.Lb libbsm
+.Sh SYNOPSIS
+.In bsm/libbsm.h
+.Ft "struct au_class_ent *"
+.Fn getauclassent void
+.Ft "struct au_class_ent *"
+.Fn getauclassent_r "struct au_class_ent *e"
+.Ft "struct au_class_ent *"
+.Fn getauclassnam "const char *name"
+.Ft "struct au_class_ent *"
+.Fn getauclassnam_r "struct au_class_ent *e" "const char *name"
+.Ft void
+.Fn setauclass void
+.Ft void
+.Fn endauclass void
+.Sh DESCRIPTION
+These interfaces may be used to look up information from the
+.Xr audit_class 5
+database, which describes audit event classes.
+Audit event classes are described by
+.Vt "struct au_class_ent" .
+.Pp
+The
+.Fn getauclassent
+function
+will return the next class found in the
+.Xr audit_class 5
+database, or the first if the function has not yet been called.
+.Dv NULL
+will be returned if no further records are available.
+.Pp
+The
+.Fn getauclassnam
+function
+looks up a class by name.
+.Dv NULL
+will be returned if no matching class can be found.
+.Pp
+The
+.Fn setauclass
+function
+resets the iterator through the
+.Xr audit_class 5
+database, causing the next call to
+.Fn getauclassent
+to start again from the beginning of the file.
+.Pp
+The
+.Fn endauclass
+function
+closes the
+.Xr audit_class 5
+database, if open.
+.Sh SEE ALSO
+.Xr libbsm 3 ,
+.Xr audit_class 5
+.Sh HISTORY
+The OpenBSM implementation was created by McAfee Research, the security
+division of McAfee Inc., under contract to Apple Computer, Inc., in 2004.
+It was subsequently adopted by the TrustedBSD Project as the foundation for
+the OpenBSM distribution.
+.Sh AUTHORS
+.An -nosplit
+This software was created by
+.An Robert Watson ,
+.An Wayne Salamon ,
+and
+.An Suresh Krishnaswamy
+for McAfee Research, the security research division of McAfee,
+Inc., under contract to Apple Computer, Inc.
+.Pp
+The Basic Security Module (BSM) interface to audit records and audit event
+stream format were defined by Sun Microsystems.
+.Sh BUGS
+These routines cannot currently distinguish between an entry not being found
+and an error accessing the database.
+The implementation should be changed to return an error via
+.Va errno
+when
+.Dv NULL
+is returned.
Deleted: vendor/openbsm/1.2_alpha4/libbsm/au_control.3
===================================================================
--- vendor/openbsm/dist/libbsm/au_control.3 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/libbsm/au_control.3 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,211 +0,0 @@
-.\"-
-.\" Copyright (c) 2005-2006 Robert N. M. Watson
-.\" All rights reserved.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\" notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\" notice, this list of conditions and the following disclaimer in the
-.\" documentation and/or other materials provided with the distribution.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
-.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-.\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
-.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-.\" SUCH DAMAGE.
-.\"
-.\" $P4: //depot/projects/trustedbsd/openbsm/libbsm/au_control.3#9 $
-.\"
-.Dd April 19, 2005
-.Dt AU_CONTROL 3
-.Os
-.Sh NAME
-.Nm setac ,
-.Nm endac ,
-.Nm getacdir ,
-.Nm getacmin ,
-.Nm getacfilesz ,
-.Nm getacflg ,
-.Nm getacna ,
-.Nm getacpol ,
-.Nm au_poltostr ,
-.Nm au_strtopol
-.Nd "look up information from the audit_control database"
-.Sh LIBRARY
-.Lb libbsm
-.Sh SYNOPSIS
-.In bsm/libbsm.h
-.Ft void
-.Fn setac void
-.Ft void
-.Fn endac void
-.Ft int
-.Fn getacdir "char *name" "int len"
-.Ft int
-.Fn getacmin "int *min_val"
-.Ft int
-.Fn getacfilesz "size_t *size_val"
-.Ft int
-.Fn getacflg "char *auditstr" "int len"
-.Ft int
-.Fn getacna "char *auditstr" "int len"
-.Ft int
-.Fn getacpol "char *auditstr" "size_t len"
-.Ft ssize_t
-.Fn au_poltostr "long policy" "size_t maxsize" "char *buf"
-.Ft int
-.Fn au_strtopol "const char *polstr" "long *policy"
-.Sh DESCRIPTION
-These interfaces may be used to look up information from the
-.Xr audit_control 5
-database, which contains various audit-related administrative parameters.
-.Pp
-The
-.Fn setac
-function
-resets the database iterator to the beginning of the database; see the
-.Sx BUGS
-section for more information.
-.Pp
-The
-.Fn endac
-function
-closes the
-.Xr audit_control 5
-database.
-.Pp
-The
-.Fn getacdir
-function
-returns the name of the directory where log data is stored via the passed
-character buffer
-.Fa name
-of length
-.Fa len .
-.Pp
-The
-.Fn getacmin
-function
-returns the minimum free disk space for the audit log target file system via
-the passed
-.Fa min_val
-variable.
-.Pp
-The
-.Fn getacfilesz
-function
-returns the audit trail rotation size in the passed
-.Vt size_t
-buffer
-.Fa size_val .
-.Pp
-The
-.Fn getacflg
-function
-returns the audit system flags via the the passed character buffer
-.Fa auditstr
-of length
-.Fa len .
-.Pp
-The
-.Fn getacna
-function
-returns the non-attributable flags via the passed character buffer
-.Fa auditstr
-of length
-.Fa len .
-.Pp
-The
-.Fn getacpol
-function
-returns the audit policy flags via the passed character buffer
-.Fa auditstr
-of length
-.Fa len .
-.Pp
-The
-.Fn au_poltostr
-function
-converts a numeric audit policy mask,
-.Fa policy ,
-to a string in the passed character buffer
-.Fa buf
-of lenth
-.Fa maxsize .
-.Pp
-The
-.Fn au_strtopol
-function
-converts an audit policy flags string,
-.Fa polstr ,
-to a numeric audit policy mask returned via
-.Fa policy .
-.Sh RETURN VALULES
-The
-.Fn getacdir ,
-.Fn getacmin ,
-.Fn getacflg ,
-.Fn getacna ,
-.Fn getacpol ,
-and
-.Fn au_strtopol
-functions
-return 0 on success, or a negative value on failure, along with error
-information in
-.Va errno .
-.Pp
-The
-.Fn au_poltostr
-function
-returns a string length of 0 or more on success, or a negative value on
-if there is a failure.
-.Pp
-Functions that return a string value will return a failure if there is
-insufficient room in the passed character buffer for the full string.
-.Sh SEE ALSO
-.Xr libbsm 3 ,
-.Xr audit_control 5
-.Sh HISTORY
-The OpenBSM implementation was created by McAfee Research, the security
-division of McAfee Inc., under contract to Apple Computer, Inc., in 2004.
-It was subsequently adopted by the TrustedBSD Project as the foundation for
-the OpenBSM distribution.
-.Sh AUTHORS
-.An -nosplit
-This software was created by
-.An Robert Watson ,
-.An Wayne Salamon ,
-and
-.An Suresh Krishnaswamy
-for McAfee Research, the security research division of McAfee,
-Inc., under contract to Apple Computer, Inc.
-.Pp
-The Basic Security Module (BSM) interface to audit records and audit event
-stream format were defined by Sun Microsystems.
-.Sh BUGS
-These routines cannot currently distinguish between an entry not being found
-and an error accessing the database.
-The implementation should be changed to return an error via
-.Va errno
-when
-.Dv NULL
-is returned.
-.Sh BUGS
-There is no reason for the
-.Fn setac
-interface to be exposed as part of the public API, as it is called implicitly
-by other access functions and iteration is not supported.
-.Pp
-These interfaces inconsistently return various negative values depending on
-the failure mode, and do not always set
-.Va errno
-on failure.
Copied: vendor/openbsm/1.2_alpha4/libbsm/au_control.3 (from rev 11163, vendor/openbsm/dist/libbsm/au_control.3)
===================================================================
--- vendor/openbsm/1.2_alpha4/libbsm/au_control.3 (rev 0)
+++ vendor/openbsm/1.2_alpha4/libbsm/au_control.3 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,258 @@
+.\"-
+.\" Copyright (c) 2005-2006 Robert N. M. Watson
+.\" All rights reserved.
+.\"
+.\" Redistribution and use in source and binary forms, with or without
+.\" modification, are permitted provided that the following conditions
+.\" are met:
+.\" 1. Redistributions of source code must retain the above copyright
+.\" notice, this list of conditions and the following disclaimer.
+.\" 2. Redistributions in binary form must reproduce the above copyright
+.\" notice, this list of conditions and the following disclaimer in the
+.\" documentation and/or other materials provided with the distribution.
+.\"
+.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+.\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+.\" SUCH DAMAGE.
+.\"
+.Dd April 19, 2005
+.Dt AU_CONTROL 3
+.Os
+.Sh NAME
+.Nm setac ,
+.Nm endac ,
+.Nm getacdir ,
+.Nm getacdist ,
+.Nm getacexpire ,
+.Nm getacfilesz ,
+.Nm getacflg ,
+.Nm getachost ,
+.Nm getacmin ,
+.Nm getacna ,
+.Nm getacpol ,
+.Nm au_poltostr ,
+.Nm au_strtopol
+.Nd "look up information from the audit_control database"
+.Sh LIBRARY
+.Lb libbsm
+.Sh SYNOPSIS
+.In bsm/libbsm.h
+.Ft void
+.Fn setac void
+.Ft void
+.Fn endac void
+.Ft int
+.Fn getacdir "char *name" "int len"
+.Ft int
+.Fn getacdist "void"
+.Ft int
+.Fn getacexpire "int *andflg" "time_t *age" "size_t *size"
+.Ft int
+.Fn getacfilesz "size_t *size_val"
+.Ft int
+.Fn getacflg "char *auditstr" "int len"
+.Ft int
+.Fn getachost "char *auditstr" "int len"
+.Ft int
+.Fn getacmin "int *min_val"
+.Ft int
+.Fn getacna "char *auditstr" "int len"
+.Ft int
+.Fn getacpol "char *auditstr" "size_t len"
+.Ft ssize_t
+.Fn au_poltostr "int policy" "size_t maxsize" "char *buf"
+.Ft int
+.Fn au_strtopol "const char *polstr" "int *policy"
+.Sh DESCRIPTION
+These interfaces may be used to look up information from the
+.Xr audit_control 5
+database, which contains various audit-related administrative parameters.
+.Pp
+The
+.Fn setac
+function
+resets the database iterator to the beginning of the database; see the
+.Sx BUGS
+section for more information.
+.Pp
+The
+.Fn endac
+function
+closes the
+.Xr audit_control 5
+database.
+.Pp
+The
+.Fn getacdir
+function
+returns the name of the directory where log data is stored via the passed
+character buffer
+.Fa name
+of length
+.Fa len .
+.Pp
+The
+.Fn getacdist
+function returns a value that allows to decide if trail files distribution is
+turned on or off.
+.Pp
+The
+.Fn getacexpire
+function
+returns the audit trail file expiration parameters in the passed
+.Vt int
+buffer
+.Fa andflg ,
+.Vt time_t
+buffer
+.Fa age
+and
+.Vt size_t
+buffer
+.Fa size .
+If the parameter is not specified in the
+.Xr audit_control 5
+file it is set to zero.
+.Pp
+The
+.Fn getacfilesz
+function
+returns the audit trail rotation size in the passed
+.Vt size_t
+buffer
+.Fa size_val .
+.Pp
+The
+.Fn getacflg
+function
+returns the audit system flags via the the passed character buffer
+.Fa auditstr
+of length
+.Fa len .
+.Pp
+The
+.Fn getachost
+function
+returns the local systems's audit host information via the the passed character
+buffer
+.Fa auditstr
+of length
+.Fa len .
+.Pp
+The
+.Fn getacmin
+function
+returns the minimum free disk space for the audit log target file system via
+the passed
+.Fa min_val
+variable.
+.Pp
+The
+.Fn getacna
+function
+returns the non-attributable flags via the passed character buffer
+.Fa auditstr
+of length
+.Fa len .
+.Pp
+The
+.Fn getacpol
+function
+returns the audit policy flags via the passed character buffer
+.Fa auditstr
+of length
+.Fa len .
+.Pp
+The
+.Fn au_poltostr
+function
+converts a numeric audit policy mask,
+.Fa policy ,
+to a string in the passed character buffer
+.Fa buf
+of lenth
+.Fa maxsize .
+.Pp
+The
+.Fn au_strtopol
+function
+converts an audit policy flags string,
+.Fa polstr ,
+to a numeric audit policy mask returned via
+.Fa policy .
+.Sh RETURN VALULES
+The
+.Fn getacfilesz ,
+.Fn getacdir ,
+.Fn getacexpire ,
+.Fn getacflg ,
+.Fn getachost ,
+.Fn getacmin ,
+.Fn getacna ,
+.Fn getacpol ,
+and
+.Fn au_strtopol
+functions
+return 0 on success, or a negative value on failure, along with error
+information in
+.Va errno .
+.Pp
+The
+.Fn au_poltostr
+function
+returns a string length of 0 or more on success, or a negative value on
+if there is a failure.
+.Pp
+The
+.Fn getacdist
+function returns 1 if trail files distribution is turned on, 0 if it is turned
+off or negative value on failure.
+.Pp
+Functions that return a string value will return a failure if there is
+insufficient room in the passed character buffer for the full string.
+.Sh SEE ALSO
+.Xr libbsm 3 ,
+.Xr audit_control 5
+.Sh HISTORY
+The OpenBSM implementation was created by McAfee Research, the security
+division of McAfee Inc., under contract to Apple Computer, Inc., in 2004.
+It was subsequently adopted by the TrustedBSD Project as the foundation for
+the OpenBSM distribution.
+.Sh AUTHORS
+.An -nosplit
+This software was created by
+.An Robert Watson ,
+.An Wayne Salamon ,
+and
+.An Suresh Krishnaswamy
+for McAfee Research, the security research division of McAfee,
+Inc., under contract to Apple Computer, Inc.
+.Pp
+The Basic Security Module (BSM) interface to audit records and audit event
+stream format were defined by Sun Microsystems.
+.Sh BUGS
+These routines cannot currently distinguish between an entry not being found
+and an error accessing the database.
+The implementation should be changed to return an error via
+.Va errno
+when
+.Dv NULL
+is returned.
+.Pp
+There is no reason for the
+.Fn setac
+interface to be exposed as part of the public API, as it is called implicitly
+by other access functions and iteration is not supported.
+.Pp
+These interfaces inconsistently return various negative values depending on
+the failure mode, and do not always set
+.Va errno
+on failure.
Copied: vendor/openbsm/1.2_alpha4/libbsm/au_domain.3 (from rev 11163, vendor/openbsm/dist/libbsm/au_domain.3)
===================================================================
--- vendor/openbsm/1.2_alpha4/libbsm/au_domain.3 (rev 0)
+++ vendor/openbsm/1.2_alpha4/libbsm/au_domain.3 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,86 @@
+.\"-
+.\" Copyright (c) 2008 Apple Inc.
+.\" All rights reserved.
+.\"
+.\" Redistribution and use in source and binary forms, with or without
+.\" modification, are permitted provided that the following conditions
+.\" are met:
+.\" 1. Redistributions of source code must retain the above copyright
+.\" notice, this list of conditions and the following disclaimer.
+.\" 2. Redistributions in binary form must reproduce the above copyright
+.\" notice, this list of conditions and the following disclaimer in the
+.\" documentation and/or other materials provided with the distribution.
+.\" 3. Neither the name of Apple Inc. ("Apple") nor the names of
+.\" its contributors may be used to endorse or promote products derived
+.\" from this software without specific prior written permission.
+.\"
+.\" THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND
+.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+.\" ARE DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR
+.\" ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+.\" STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+.\" IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+.\" POSSIBILITY OF SUCH DAMAGE.
+.\"
+.Dd December 28, 2008
+.Dt AU_BSM_TO_DOMAIN 3
+.Os
+.Sh NAME
+.Nm au_bsm_to_domain ,
+.Nm au_domain_to_bsm
+.Nd "convert between BSM and local protocol domains"
+.Sh LIBRARY
+.Lb libbsm
+.Sh SYNOPSIS
+.In bsm/libbsm.h
+.Ft int
+.Fn au_bsm_to_domain "u_short bsm_domain" "int *local_domainp"
+.Ft u_short
+.Fn au_domain_to_bsm "int local_domain"
+.Sh DESCRIPTION
+These interfaces may be used to convert between the local and BSM protocol
+domains.
+The
+.Fn au_bsm_to_domain
+function accepts a BSM domain,
+.Fa bsm_domain ,
+and converts it to a local domain, such as those passed to
+.Xr socket 2 ,
+that will be stored in the integer pointed to by
+.Fa local_domainp
+if successful.
+This call will fail if the BSM domain cannot be mapped into a local domain,
+which may occur if the socket token was generated on another operating
+system.
+.Pp
+The
+.Fn au_domain_to_bsm
+function accepts a local domain, and returns the BSM domain for it.
+This call cannot fail, and instead returns a BSM domain indicating to a later
+decoder that the domain could not be encoded.
+.Sh RETURN VALULES
+On success,
+.Fn au_bsm_to_domain
+returns 0 and a converted domain; on failure, it returns -1 but does not set
+.Xr errno 2 .
+.Sh SEE ALSO
+.Xr au_bsm_to_socket_type 3 ,
+.Xr au_socket_type_to_bsm 3 ,
+.Xr au_to_socket_ex 3 ,
+.Xr libbsm 3
+.Sh HISTORY
+.Fn au_bsm_to_domain
+and
+.Fn au_domain_to_bsm
+were introduced in OpenBSM 1.1.
+.Sh AUTHORS
+These functions were implemented by
+.An Robert Watson
+under contract to Apple Inc.
+.Pp
+The Basic Security Module (BSM) interface to audit records and audit event
+stream format were defined by Sun Microsystems.
Copied: vendor/openbsm/1.2_alpha4/libbsm/au_errno.3 (from rev 11163, vendor/openbsm/dist/libbsm/au_errno.3)
===================================================================
--- vendor/openbsm/1.2_alpha4/libbsm/au_errno.3 (rev 0)
+++ vendor/openbsm/1.2_alpha4/libbsm/au_errno.3 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,110 @@
+.\"-
+.\" Copyright (c) 2008 Apple Inc.
+.\" All rights reserved.
+.\"
+.\" Redistribution and use in source and binary forms, with or without
+.\" modification, are permitted provided that the following conditions
+.\" are met:
+.\" 1. Redistributions of source code must retain the above copyright
+.\" notice, this list of conditions and the following disclaimer.
+.\" 2. Redistributions in binary form must reproduce the above copyright
+.\" notice, this list of conditions and the following disclaimer in the
+.\" documentation and/or other materials provided with the distribution.
+.\" 3. Neither the name of Apple Inc. ("Apple") nor the names of
+.\" its contributors may be used to endorse or promote products derived
+.\" from this software without specific prior written permission.
+.\"
+.\" THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND
+.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+.\" ARE DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR
+.\" ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+.\" STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+.\" IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+.\" POSSIBILITY OF SUCH DAMAGE.
+.\"
+.Dd December 8, 2008
+.Dt AU_BSM_TO_ERRNO 3
+.Os
+.Sh NAME
+.Nm au_bsm_to_errno ,
+.Nm au_errno_to_bsm ,
+.Nm au_strerror
+.Nd "convert between BSM and local error numbers"
+.Sh LIBRARY
+.Lb libbsm
+.Sh SYNOPSIS
+.In bsm/libbsm.h
+.Ft int
+.Fn au_bsm_to_errno "u_char bsm_error" "int *errorp"
+.Ft u_char
+.Fn au_errno_to_bsm "int error"
+.Ft const char *
+.Fn au_strerror "int bsm_error"
+.Sh DESCRIPTION
+These interfaces may be used to convert between the local (
+.Xr errno 2 )
+and BSM error number spaces found in BSM return tokens.
+.Pp
+The
+.Fn au_bsm_to_errno
+function accepts a BSM error value,
+.Fa bsm_error ,
+and converts it to an
+.Xr errno 2
+that will be stored in the integer pointed to by
+.Fa errorp
+if successful.
+This call will fail if the BSM error cannot be mapped into a local error
+number, which may occur if the return token was generated on another
+operating system.
+.Pp
+The
+.Fn au_errno_to_bsm
+function accepts a local
+.Xr errno 2
+value, and returns the BSM error number for it.
+This call cannot fail, and instead returns a BSM error number indicating to
+a later decoder that the error could not be encoded.
+.Pp
+The
+.Fn au_strerror
+function converts a BSM error value to a string, generally by converting first to a
+local error number and using the local
+.Xr strerror 3
+function, but will also work for errors that are not locally defined.
+.Sh RETURN VALULES
+On success,
+.Fn au_bsm_to_errno
+returns 0 and a converted error value; on failure, it returns -1 but does not
+set
+.Xr errno 2 .
+.Pp
+On success,
+.Fn au_strerror
+returns a pointer to an error string; on failure it will return
+.Dv NULL .
+.Sh SEE ALSO
+.Xr au_to_return 3 ,
+.Xr au_to_return32 3 ,
+.Xr au_to_return64 3 ,
+.Xr libbsm 3
+.Sh HISTORY
+.Fn au_bsm_to_errno
+and
+.Fn au_errno_to_bsm
+were introduced in OpenBSM 1.1.
+.Sh AUTHORS
+These functions were implemented by
+.An Robert Watson
+under contract to Apple Inc.
+.Pp
+The Basic Security Module (BSM) interface to audit records and audit event
+stream format were defined by Sun Microsystems.
+.Sh BUGS
+.Nm au_strerror
+is unable to provide localized strings for errors not available in the local
+operating system.
Deleted: vendor/openbsm/1.2_alpha4/libbsm/au_event.3
===================================================================
--- vendor/openbsm/dist/libbsm/au_event.3 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/libbsm/au_event.3 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,171 +0,0 @@
-.\"-
-.\" Copyright (c) 2005-2006 Robert N. M. Watson
-.\" All rights reserved.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\" notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\" notice, this list of conditions and the following disclaimer in the
-.\" documentation and/or other materials provided with the distribution.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
-.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-.\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
-.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-.\" SUCH DAMAGE.
-.\"
-.\" $P4: //depot/projects/trustedbsd/openbsm/libbsm/au_event.3#8 $
-.\"
-.Dd April 19, 2005
-.Dt AU_EVENT 3
-.Os
-.Sh NAME
-.Nm free_au_event_ent ,
-.Nm setauevent ,
-.Nm endauevent ,
-.Nm getauevent ,
-.Nm getauevent_r ,
-.Nm getauevnam ,
-.Nm getauevnam_r ,
-.Nm getauevnum ,
-.Nm getauevnum_r ,
-.Nm getauevnonam ,
-.Nm getauevnonam_r
-.Nd "look up information from the audit_event database"
-.Sh LIBRARY
-.Lb libbsm
-.Sh SYNOPSIS
-.In bsm/libbsm.h
-.Ft void
-.Fn setauevent void
-.Ft void
-.Fn endauevent void
-.Ft "struct au_event_ent *"
-.Fn getauevent void
-.Ft "struct au_event_ent *"
-.Fn getauevent_r "struct au_event_ent *e"
-.Ft "struct au_event_ent *"
-.Fn getauevnam "const char *name"
-.Ft "struct au_event_ent *"
-.Fn getauevnam_r "struct au_event_ent *e" "const char *name"
-.Ft "struct au_event_ent *"
-.Fn getauevnum "au_event_t event_number"
-.Ft "struct au_event_ent *"
-.Fn getauevnum_r "struct au_event_ent *e" "au_event_t event_number"
-.Ft "au_event_t *"
-.Fn getauevnonam "const char *event_name"
-.Ft "au_event_t *"
-.Fn getauevnonam_r "au_event_t *ev" "const char *event_name"
-.Sh DESCRIPTION
-These interfaces may be used to look up information from the
-.Xr audit_event 5
-database, which describes audit events.
-Entries in the database are described by
-.Vt "struct au_event_ent"
-entries, which are returned by calls to
-.Fn getauevent ,
-.Fn getauevnam ,
-or
-.Fn getauevnum .
-It is also possible to look up an event number via a call to
-.Fn getauevnonam .
-.Pp
-The
-.Fn setauevent
-function
-resets the database access session for
-.Xr audit_event 5 ,
-so that the next call to
-.Fn getauevent
-will start with the first entry in the database.
-.Pp
-The
-.Fn endauevent
-function
-closes the
-.Xr audit_event 5
-database session.
-.Pp
-The
-.Fn getauevent
-function
-returns a reference to the next entry in the
-.Xr audit_event 5
-database.
-.Pp
-The
-.Fn getauevnam
-function
-returns a reference to the entry in the
-.Xr audit_event 5
-database with a name of
-.Fa name .
-.Pp
-.Fn getauevnum
-returns a reference to the entry in the
-.Xr audit_event 5
-database with an event number of
-.Fa event_number .
-.Pp
-The
-.Fn getauevnonam
-function
-returns a reference to an audit event number using the
-.Xr audit_event 5
-database.
-.Sh RETURN VALUES
-Functions
-.Fn getauevent ,
-.Fn getauevent_r ,
-.Fn getauevnam ,
-.Fn getauevnam_r ,
-.Fn getauevnum ,
-.Fn getauevnum_r ,
-and
-.Fn getauevnonam
-will return a reference to a
-.Vt "struct au_event_ent"
-or
-.Vt au_event_t
-on success, or
-.Dv NULL
-on failure, with
-.Va errno
-set to provide further error information.
-.Sh SEE ALSO
-.Xr libbsm 3 ,
-.Xr audit_event 5
-.Sh HISTORY
-The OpenBSM implementation was created by McAfee Research, the security
-division of McAfee Inc., under contract to Apple Computer, Inc., in 2004.
-It was subsequently adopted by the TrustedBSD Project as the foundation for
-the OpenBSM distribution.
-.Sh AUTHORS
-.An -nosplit
-This software was created by
-.An Robert Watson ,
-.An Wayne Salamon ,
-and
-.An Suresh Krishnaswamy
-for McAfee Research, the security research division of McAfee,
-Inc., under contract to Apple Computer, Inc.
-.Pp
-The Basic Security Module (BSM) interface to audit records and audit event
-stream format were defined by Sun Microsystems.
-.Sh BUGS
-The
-.Va errno
-variable
-is not always properly set following a failure.
-.Pp
-These routines are thread-safe, but not re-entrant, so simultaneous or
-interleaved use of these functions will affect the iterator.
Copied: vendor/openbsm/1.2_alpha4/libbsm/au_event.3 (from rev 11163, vendor/openbsm/dist/libbsm/au_event.3)
===================================================================
--- vendor/openbsm/1.2_alpha4/libbsm/au_event.3 (rev 0)
+++ vendor/openbsm/1.2_alpha4/libbsm/au_event.3 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,169 @@
+.\"-
+.\" Copyright (c) 2005-2006 Robert N. M. Watson
+.\" All rights reserved.
+.\"
+.\" Redistribution and use in source and binary forms, with or without
+.\" modification, are permitted provided that the following conditions
+.\" are met:
+.\" 1. Redistributions of source code must retain the above copyright
+.\" notice, this list of conditions and the following disclaimer.
+.\" 2. Redistributions in binary form must reproduce the above copyright
+.\" notice, this list of conditions and the following disclaimer in the
+.\" documentation and/or other materials provided with the distribution.
+.\"
+.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+.\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+.\" SUCH DAMAGE.
+.\"
+.Dd April 19, 2005
+.Dt AU_EVENT 3
+.Os
+.Sh NAME
+.Nm free_au_event_ent ,
+.Nm setauevent ,
+.Nm endauevent ,
+.Nm getauevent ,
+.Nm getauevent_r ,
+.Nm getauevnam ,
+.Nm getauevnam_r ,
+.Nm getauevnum ,
+.Nm getauevnum_r ,
+.Nm getauevnonam ,
+.Nm getauevnonam_r
+.Nd "look up information from the audit_event database"
+.Sh LIBRARY
+.Lb libbsm
+.Sh SYNOPSIS
+.In bsm/libbsm.h
+.Ft void
+.Fn setauevent void
+.Ft void
+.Fn endauevent void
+.Ft "struct au_event_ent *"
+.Fn getauevent void
+.Ft "struct au_event_ent *"
+.Fn getauevent_r "struct au_event_ent *e"
+.Ft "struct au_event_ent *"
+.Fn getauevnam "const char *name"
+.Ft "struct au_event_ent *"
+.Fn getauevnam_r "struct au_event_ent *e" "const char *name"
+.Ft "struct au_event_ent *"
+.Fn getauevnum "au_event_t event_number"
+.Ft "struct au_event_ent *"
+.Fn getauevnum_r "struct au_event_ent *e" "au_event_t event_number"
+.Ft "au_event_t *"
+.Fn getauevnonam "const char *event_name"
+.Ft "au_event_t *"
+.Fn getauevnonam_r "au_event_t *ev" "const char *event_name"
+.Sh DESCRIPTION
+These interfaces may be used to look up information from the
+.Xr audit_event 5
+database, which describes audit events.
+Entries in the database are described by
+.Vt "struct au_event_ent"
+entries, which are returned by calls to
+.Fn getauevent ,
+.Fn getauevnam ,
+or
+.Fn getauevnum .
+It is also possible to look up an event number via a call to
+.Fn getauevnonam .
+.Pp
+The
+.Fn setauevent
+function
+resets the database access session for
+.Xr audit_event 5 ,
+so that the next call to
+.Fn getauevent
+will start with the first entry in the database.
+.Pp
+The
+.Fn endauevent
+function
+closes the
+.Xr audit_event 5
+database session.
+.Pp
+The
+.Fn getauevent
+function
+returns a reference to the next entry in the
+.Xr audit_event 5
+database.
+.Pp
+The
+.Fn getauevnam
+function
+returns a reference to the entry in the
+.Xr audit_event 5
+database with a name of
+.Fa name .
+.Pp
+.Fn getauevnum
+returns a reference to the entry in the
+.Xr audit_event 5
+database with an event number of
+.Fa event_number .
+.Pp
+The
+.Fn getauevnonam
+function
+returns a reference to an audit event number using the
+.Xr audit_event 5
+database.
+.Sh RETURN VALUES
+Functions
+.Fn getauevent ,
+.Fn getauevent_r ,
+.Fn getauevnam ,
+.Fn getauevnam_r ,
+.Fn getauevnum ,
+.Fn getauevnum_r ,
+and
+.Fn getauevnonam
+will return a reference to a
+.Vt "struct au_event_ent"
+or
+.Vt au_event_t
+on success, or
+.Dv NULL
+on failure, with
+.Va errno
+set to provide further error information.
+.Sh SEE ALSO
+.Xr libbsm 3 ,
+.Xr audit_event 5
+.Sh HISTORY
+The OpenBSM implementation was created by McAfee Research, the security
+division of McAfee Inc., under contract to Apple Computer, Inc., in 2004.
+It was subsequently adopted by the TrustedBSD Project as the foundation for
+the OpenBSM distribution.
+.Sh AUTHORS
+.An -nosplit
+This software was created by
+.An Robert Watson ,
+.An Wayne Salamon ,
+and
+.An Suresh Krishnaswamy
+for McAfee Research, the security research division of McAfee,
+Inc., under contract to Apple Computer, Inc.
+.Pp
+The Basic Security Module (BSM) interface to audit records and audit event
+stream format were defined by Sun Microsystems.
+.Sh BUGS
+The
+.Va errno
+variable
+is not always properly set following a failure.
+.Pp
+These routines are thread-safe, but not re-entrant, so simultaneous or
+interleaved use of these functions will affect the iterator.
Copied: vendor/openbsm/1.2_alpha4/libbsm/au_fcntl_cmd.3 (from rev 11163, vendor/openbsm/dist/libbsm/au_fcntl_cmd.3)
===================================================================
--- vendor/openbsm/1.2_alpha4/libbsm/au_fcntl_cmd.3 (rev 0)
+++ vendor/openbsm/1.2_alpha4/libbsm/au_fcntl_cmd.3 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,95 @@
+.\"-
+.\" Copyright (c) 2009 Apple Inc.
+.\" All rights reserved.
+.\"
+.\" Redistribution and use in source and binary forms, with or without
+.\" modification, are permitted provided that the following conditions
+.\" are met:
+.\" 1. Redistributions of source code must retain the above copyright
+.\" notice, this list of conditions and the following disclaimer.
+.\" 2. Redistributions in binary form must reproduce the above copyright
+.\" notice, this list of conditions and the following disclaimer in the
+.\" documentation and/or other materials provided with the distribution.
+.\" 3. Neither the name of Apple Inc. ("Apple") nor the names of
+.\" its contributors may be used to endorse or promote products derived
+.\" from this software without specific prior written permission.
+.\"
+.\" THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND
+.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+.\" ARE DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR
+.\" ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+.\" STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+.\" IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+.\" POSSIBILITY OF SUCH DAMAGE.
+.\"
+.Dd March 5, 2009
+.Dt AU_BSM_TO_FCNTL_CMD 3
+.Os
+.Sh NAME
+.Nm au_bsm_to_fcntl_cmd ,
+.Nm au_fcntl_cmd_to_bsm
+.Nd "convert between BSM and local fcntl(2) command values"
+.Sh LIBRARY
+.Lb libbsm
+.Sh SYNOPSIS
+.In bsm/libbsm.h
+.Ft int
+.Fn au_bsm_to_fcntl_cmd "u_short bsm_fcntl_cmd" "int *local_fcntl_cmdp"
+.Ft u_short
+.Fn au_fcntl_cmd_to_bsm "int local_fcntl_cmd"
+.Sh DESCRIPTION
+These interfaces may be used to convert between the local and BSM
+.Xr fcntl 2
+command values.
+The
+.Fn au_bsm_to_fcntl_cmd
+function accepts a BSM command value,
+.Fa bsm_fcntl_cmd ,
+and converts it to a local command value passed to
+.Xr fcntl 2 ,
+that will be stored in the integer pointed to by
+.Fa local_fcntl_cmdp
+if successful.
+This call will fail if the BSM command value cannot be mapped into a local
+.Xr fcntl 2
+command value which may occur if the command token was generated on another
+operating system.
+.Pp
+The
+.Fn au_fcntl_cmd_to_bsm
+function accepts a local
+.Xr fcntl 2
+command value, and returns the BSM
+.Xr fcntl 2
+command value for it. This call cannot fail, and instead returns a BSM
+command value indicating to a later decoder that the command value could
+not be encoded.
+.Sh RETURN VALUES
+On success,
+.Fn au_bsm_to_fcntl_cmd
+returns 0 and a converted command value; on failure, it returns -1 but does
+not set
+.Xr errno 2 .
+.Sh SEE ALSO
+.Xr fcntl 2 ,
+.Xr au_bsm_to_domain 3 ,
+.Xr au_bsm_to_socket_type 3 ,
+.Xr au_domain_to_bsm 3 ,
+.Xr au_socket_type_to_bsm 3 ,
+.Xr libbsm 3
+.Sh HISTORY
+.Fn au_bsm_to_domain
+and
+.Fn au_domain_to_bsm
+were introduced in OpenBSM 1.1.
+.Sh AUTHORS
+These functions were implemented by
+.An Stacey Son
+under contract to Apple Inc.
+.Pp
+The Basic Security Module (BSM) interface to audit records and audit event
+stream format were defined by Sun Microsystems.
Deleted: vendor/openbsm/1.2_alpha4/libbsm/au_free_token.3
===================================================================
--- vendor/openbsm/dist/libbsm/au_free_token.3 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/libbsm/au_free_token.3 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,97 +0,0 @@
-.\"-
-.\" Copyright (c) 2004 Apple Computer, Inc.
-.\" Copyright (c) 2005 Robert N. M. Watson
-.\" All rights reserved.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\" notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\" notice, this list of conditions and the following disclaimer in the
-.\" documentation and/or other materials provided with the distribution.
-.\" 3. Neither the name of Apple Computer, Inc. ("Apple") nor the names of
-.\" its contributors may be used to endorse or promote products derived
-.\" from this software without specific prior written permission.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND
-.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-.\" ARE DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR
-.\" ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-.\" STRING LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
-.\" IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-.\" POSSIBILITY OF SUCH DAMAGE.
-.\"
-.\" $P4: //depot/projects/trustedbsd/openbsm/libbsm/au_free_token.3#6 $
-.\"
-.Dd April 19, 2005
-.Dt AU_FREE_TOKEN 3
-.Os
-.Sh NAME
-.Nm au_free_token
-.Nd "deallocate a token_t created by any of the au_to_*() BSM API functions"
-.Sh LIBRARY
-.Lb libbsm
-.Sh SYNOPSIS
-.In bsm/libbsm.h
-.Ft void
-.Fn au_free_token "token_t *tok"
-.Sh DESCRIPTION
-The BSM API generally manages deallocation of
-.Vt token_t
-objects.
-However, if
-.Xr au_write 3
-is passed a bad audit descriptor, the
-.Vt "token_t *"
-parameter will be left untouched.
-In that case, the caller can deallocate the
-.Vt token_t
-using
-.Fn au_free_token
-if desired.
-.Pp
-The
-.Fa tok
-argument is a
-.Vt "token_t *"
-generated by one of the
-.Fn au_to_*
-BSM API calls.
-For convenience,
-.Fa tok
-may be
-.Dv NULL ,
-in which case
-.Fn au_free_token
-returns immediately.
-.Sh IMPLEMENTATION NOTES
-This is, in fact, what
-.Xr audit_write 3
-does, in keeping with the existing memory management model of the BSM API.
-.Sh SEE ALSO
-.Xr audit_write 3 ,
-.Xr au_write 3 ,
-.Xr libbsm 3
-.Sh HISTORY
-The OpenBSM implementation was created by McAfee Research, the security
-division of McAfee Inc., under contract to Apple Computer, Inc., in 2004.
-It was subsequently adopted by the TrustedBSD Project as the foundation for
-the OpenBSM distribution.
-.Sh AUTHORS
-.An -nosplit
-This software was created by
-.An Robert Watson ,
-.An Wayne Salamon ,
-and
-.An Suresh Krishnaswamy
-for McAfee Research, the security research division of McAfee,
-Inc., under contract to Apple Computer, Inc.
-.Pp
-The Basic Security Module (BSM) interface to audit records and audit event
-stream format were defined by Sun Microsystems.
Copied: vendor/openbsm/1.2_alpha4/libbsm/au_free_token.3 (from rev 11163, vendor/openbsm/dist/libbsm/au_free_token.3)
===================================================================
--- vendor/openbsm/1.2_alpha4/libbsm/au_free_token.3 (rev 0)
+++ vendor/openbsm/1.2_alpha4/libbsm/au_free_token.3 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,95 @@
+.\"-
+.\" Copyright (c) 2004 Apple Inc.
+.\" Copyright (c) 2005 Robert N. M. Watson
+.\" All rights reserved.
+.\"
+.\" Redistribution and use in source and binary forms, with or without
+.\" modification, are permitted provided that the following conditions
+.\" are met:
+.\" 1. Redistributions of source code must retain the above copyright
+.\" notice, this list of conditions and the following disclaimer.
+.\" 2. Redistributions in binary form must reproduce the above copyright
+.\" notice, this list of conditions and the following disclaimer in the
+.\" documentation and/or other materials provided with the distribution.
+.\" 3. Neither the name of Apple Inc. ("Apple") nor the names of
+.\" its contributors may be used to endorse or promote products derived
+.\" from this software without specific prior written permission.
+.\"
+.\" THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND
+.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+.\" ARE DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR
+.\" ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+.\" STRING LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+.\" IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+.\" POSSIBILITY OF SUCH DAMAGE.
+.\"
+.Dd April 19, 2005
+.Dt AU_FREE_TOKEN 3
+.Os
+.Sh NAME
+.Nm au_free_token
+.Nd "deallocate a token_t created by any of the au_to_*() BSM API functions"
+.Sh LIBRARY
+.Lb libbsm
+.Sh SYNOPSIS
+.In bsm/libbsm.h
+.Ft void
+.Fn au_free_token "token_t *tok"
+.Sh DESCRIPTION
+The BSM API generally manages deallocation of
+.Vt token_t
+objects.
+However, if
+.Xr au_write 3
+is passed a bad audit descriptor, the
+.Vt "token_t *"
+parameter will be left untouched.
+In that case, the caller can deallocate the
+.Vt token_t
+using
+.Fn au_free_token
+if desired.
+.Pp
+The
+.Fa tok
+argument is a
+.Vt "token_t *"
+generated by one of the
+.Fn au_to_*
+BSM API calls.
+For convenience,
+.Fa tok
+may be
+.Dv NULL ,
+in which case
+.Fn au_free_token
+returns immediately.
+.Sh IMPLEMENTATION NOTES
+This is, in fact, what
+.Xr audit_write 3
+does, in keeping with the existing memory management model of the BSM API.
+.Sh SEE ALSO
+.Xr au_write 3 ,
+.Xr audit_write 3 ,
+.Xr libbsm 3
+.Sh HISTORY
+The OpenBSM implementation was created by McAfee Research, the security
+division of McAfee Inc., under contract to Apple Computer, Inc., in 2004.
+It was subsequently adopted by the TrustedBSD Project as the foundation for
+the OpenBSM distribution.
+.Sh AUTHORS
+.An -nosplit
+This software was created by
+.An Robert Watson ,
+.An Wayne Salamon ,
+and
+.An Suresh Krishnaswamy
+for McAfee Research, the security research division of McAfee,
+Inc., under contract to Apple Computer, Inc.
+.Pp
+The Basic Security Module (BSM) interface to audit records and audit event
+stream format were defined by Sun Microsystems.
Deleted: vendor/openbsm/1.2_alpha4/libbsm/au_io.3
===================================================================
--- vendor/openbsm/dist/libbsm/au_io.3 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/libbsm/au_io.3 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,136 +0,0 @@
-.\"-
-.\" Copyright (c) 2005 Robert N. M. Watson
-.\" All rights reserved.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\" notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\" notice, this list of conditions and the following disclaimer in the
-.\" documentation and/or other materials provided with the distribution.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
-.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-.\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
-.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-.\" SUCH DAMAGE.
-.\"
-.\" $P4: //depot/projects/trustedbsd/openbsm/libbsm/au_io.3#5 $
-.\"
-.Dd April 19, 2005
-.Dt AU_IO 3
-.Os
-.Sh NAME
-.Nm au_fetch_tok ,
-.Nm au_print_tok ,
-.Nm au_read_rec
-.Nd "perform I/O involving an audit record"
-.Sh LIBRARY
-.Lb libbsm
-.Sh SYNOPSIS
-.In bsm/libbsm.h
-.Ft int
-.Fn au_fetch_tok "tokenstr_t *tok" "u_char *buf" "int len"
-.Ft void
-.Fo au_print_tok
-.Fa "FILE *outfp" "tokenstr_t *tok" "char *del" "char raw" "char sfrm"
-.Fc
-.Ft int
-.Fn au_read_rec "FILE *fp" "u_char **buf"
-.Sh DESCRIPTION
-These interfaces support input and output (I/O) involving audit records,
-internalizing an audit record from a byte stream, converting a token to
-either a raw or default string, and reading a single record from a file.
-.Pp
-The
-.Fn au_fetch_tok
-function
-reads a token from the passed buffer
-.Fa buf
-of length
-.Fa len
-bytes, and returns a pointer to the token via
-.Fa tok .
-.Pp
-The
-.Fn au_print_tok
-function
-prints a string form of the token
-.Fa tok
-to the file output stream
-.Fa outfp ,
-either in default mode, or raw mode if
-.Fa raw
-is set non-zero.
-The delimiter
-.Fa del
-is used when printing.
-.Pp
-The
-.Fn au_read_rec
-function
-reads an audit record from the file stream
-.Fa fp ,
-and returns an allocated memory buffer containing the record via
-.Fa *buf ,
-which must be freed by the caller using
-.Xr free 3 .
-.Pp
-A typical use of these routines might open a file with
-.Xr fopen 3 ,
-then read records from the file sequentially by calling
-.Fn au_read_rec .
-Each record would be broken down into components tokens through sequential
-calls to
-.Fn au_fetch_tok
-on the buffer, and then invoking
-.Fn au_print_tok
-to print each token to an output stream such as
-.Dv stdout .
-On completion of the processing of each record, a call to
-.Xr free 3
-would be used to free the record buffer.
-Finally, the source stream would be closed by a call to
-.Xr fclose 3 .
-.Sh RETURN VALUES
-The
-.Fn au_fetch_tok
-and
-.Fn au_read_rec
-functions
-return 0 on success, or \-1 on failure along with additional error information
-returned via
-.Va errno .
-.Sh SEE ALSO
-.Xr free 3 ,
-.Xr libbsm 3
-.Sh HISTORY
-The OpenBSM implementation was created by McAfee Research, the security
-division of McAfee Inc., under contract to Apple Computer, Inc., in 2004.
-It was subsequently adopted by the TrustedBSD Project as the foundation for
-the OpenBSM distribution.
-.Sh AUTHORS
-.An -nosplit
-This software was created by
-.An Robert Watson ,
-.An Wayne Salamon ,
-and
-.An Suresh Krishnaswamy
-for McAfee Research, the security research division of McAfee,
-Inc., under contract to Apple Computer, Inc.
-.Pp
-The Basic Security Module (BSM) interface to audit records and audit event
-stream format were defined by Sun Microsystems.
-.Sh BUGS
-The
-.Va errno
-variable
-may not always be properly set in the event of an error.
Copied: vendor/openbsm/1.2_alpha4/libbsm/au_io.3 (from rev 11163, vendor/openbsm/dist/libbsm/au_io.3)
===================================================================
--- vendor/openbsm/1.2_alpha4/libbsm/au_io.3 (rev 0)
+++ vendor/openbsm/1.2_alpha4/libbsm/au_io.3 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,173 @@
+.\"-
+.\" Copyright (c) 2009 Apple, Inc.
+.\" Copyright (c) 2005 Robert N. M. Watson
+.\" All rights reserved.
+.\"
+.\" Redistribution and use in source and binary forms, with or without
+.\" modification, are permitted provided that the following conditions
+.\" are met:
+.\" 1. Redistributions of source code must retain the above copyright
+.\" notice, this list of conditions and the following disclaimer.
+.\" 2. Redistributions in binary form must reproduce the above copyright
+.\" notice, this list of conditions and the following disclaimer in the
+.\" documentation and/or other materials provided with the distribution.
+.\"
+.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+.\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+.\" SUCH DAMAGE.
+.\"
+.Dd August 4, 2009
+.Dt AU_IO 3
+.Os
+.Sh NAME
+.Nm au_fetch_tok ,
+.Nm au_print_tok ,
+.Nm au_print_flags_tok ,
+.Nm au_read_rec
+.Nd "perform I/O involving an audit record"
+.Sh LIBRARY
+.Lb libbsm
+.Sh SYNOPSIS
+.In bsm/libbsm.h
+.Ft int
+.Fn au_fetch_tok "tokenstr_t *tok" "u_char *buf" "int len"
+.Ft void
+.Fo au_print_tok
+.Fa "FILE *outfp" "tokenstr_t *tok" "char *del" "char raw" "char sfrm"
+.Fc
+.Ft void
+.Fo au_print_flags_tok
+.Fa "FILE *outfp" "tokenstr_t *tok" "char *del" "int oflags"
+.Fc
+.Ft int
+.Fn au_read_rec "FILE *fp" "u_char **buf"
+.Sh DESCRIPTION
+These interfaces support input and output (I/O) involving audit records,
+internalizing an audit record from a byte stream, converting a token to
+either a raw or default string, and reading a single record from a file.
+.Pp
+The
+.Fn au_fetch_tok
+function
+reads a token from the passed buffer
+.Fa buf
+of length
+.Fa len
+bytes, and returns a pointer to the token via
+.Fa tok .
+.Pp
+The
+.Fn au_print_tok
+function
+prints a string form of the token
+.Fa tok
+to the file output stream
+.Fa outfp ,
+either in default mode, or raw mode if
+.Fa raw
+is set non-zero.
+The delimiter
+.Fa del
+is used when printing.
+The
+.Fn au_print_flags_tok
+function is a replacement for
+.Fn au_print_tok .
+The
+.Fa oflags
+controls how the output should be formatted and is specified by
+or'ing the following flags:
+.Pp
+.Bl -tag -width AU_OFLAG_NORESOLVE -compact -offset indent
+.It Li AU_OFLAG_NONE
+Use the default form.
+.It Li AU_OFLAG_NORESOLVE
+Leave user and group IDs in their numeric form.
+.It Li AU_OFLAG_RAW
+Use the raw, numeric form.
+.It Li AU_OFLAG_SHORT
+Use the short form.
+.It Li AU_OFLAG_XML
+Use the XML form.
+.El
+.Pp
+The flags options AU_OFLAG_SHORT and AU_OFLAG_RAW are exclusive and
+should not be used together.
+.Pp
+The
+.Fn au_read_rec
+function
+reads an audit record from the file stream
+.Fa fp ,
+and returns an allocated memory buffer containing the record via
+.Fa *buf ,
+which must be freed by the caller using
+.Xr free 3 .
+.Pp
+A typical use of these routines might open a file with
+.Xr fopen 3 ,
+then read records from the file sequentially by calling
+.Fn au_read_rec .
+Each record would be broken down into components tokens through sequential
+calls to
+.Fn au_fetch_tok
+on the buffer, and then invoking
+.Fn au_print_flags_tok
+to print each token to an output stream such as
+.Dv stdout .
+On completion of the processing of each record, a call to
+.Xr free 3
+would be used to free the record buffer.
+Finally, the source stream would be closed by a call to
+.Xr fclose 3 .
+.Sh RETURN VALUES
+The
+.Fn au_fetch_tok
+and
+.Fn au_read_rec
+functions
+return 0 on success, or \-1 on failure along with additional error information
+returned via
+.Va errno .
+.Sh SEE ALSO
+.Xr free 3 ,
+.Xr libbsm 3
+.Sh HISTORY
+The OpenBSM implementation was created by McAfee Research, the security
+division of McAfee Inc., under contract to Apple Computer, Inc., in 2004.
+It was subsequently adopted by the TrustedBSD Project as the foundation for
+the OpenBSM distribution.
+.Pp
+The
+.Fn au_print_flags_tok
+function was added by Stacey Son as a replacement for the
+.Fn au_print_tok
+so new output formatting flags can be easily added without changing the API.
+The
+.Fn au_print_tok
+is obsolete but remains in the API to support legacy code.
+.Sh AUTHORS
+.An -nosplit
+This software was created by
+.An Robert Watson ,
+.An Wayne Salamon ,
+and
+.An Suresh Krishnaswamy
+for McAfee Research, the security research division of McAfee,
+Inc., under contract to Apple Computer, Inc.
+.Pp
+The Basic Security Module (BSM) interface to audit records and audit event
+stream format were defined by Sun Microsystems.
+.Sh BUGS
+The
+.Va errno
+variable
+may not always be properly set in the event of an error.
Deleted: vendor/openbsm/1.2_alpha4/libbsm/au_mask.3
===================================================================
--- vendor/openbsm/dist/libbsm/au_mask.3 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/libbsm/au_mask.3 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,156 +0,0 @@
-.\"-
-.\" Copyright (c) 2005 Robert N. M. Watson
-.\" All rights reserved.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\" notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\" notice, this list of conditions and the following disclaimer in the
-.\" documentation and/or other materials provided with the distribution.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
-.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-.\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
-.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-.\" SUCH DAMAGE.
-.\"
-.\" $P4: //depot/projects/trustedbsd/openbsm/libbsm/au_mask.3#6 $
-.\"
-.Dd April 19, 2005
-.Dt AU_MASK 3
-.Os
-.Sh NAME
-.Nm au_preselect ,
-.Nm getauditflagsbin ,
-.Nm getauditflagschar
-.Nd "convert between string and numeric values of audit masks"
-.Sh LIBRARY
-.Lb libbsm
-.Sh SYNOPSIS
-.In bsm/libbsm.h
-.Ft int
-.Fn au_preselect "au_event_t event" "au_mask_t *mask_p" "int sorf" "int flag"
-.Ft int
-.Fn getauditflagsbin "char *auditstr" "au_mask_t *masks"
-.Ft int
-.Fn getauditflagschar "char *auditstr" "au_mask_t *masks" "int verbose"
-.Sh DESCRIPTION
-These interfaces support processing of an audit mask represented by type
-.Vt au_mask_t ,
-including conversion between numeric and text formats, and computing whether
-or not an event is matched by a mask.
-.Pp
-The
-.Fn au_preselect
-function
-calculates whether or not the audit event passed via
-.Fa event
-is matched by the audit mask passed via
-.Fa mask_p .
-The
-.Fa sorf
-argument indicates whether or not to consider the event as a success,
-if the
-.Dv AU_PRS_SUCCESS
-flag is set, or failure, if the
-.Dv AU_PRS_FAILURE
-flag is set.
-The
-.Fa flag
-argument accepts additional arguments influencing the behavior of
-.Fn au_preselect ,
-including
-.Dv AU_PRS_REREAD ,
-which causes the event to be re-looked up rather than read from the cache,
-or
-.Dv AU_PRS_USECACHE
-which forces use of the cache.
-.Pp
-The
-.Fn getauditflagsbin
-function
-converts a string representation of an audit mask passed via a character
-string pointed to by
-.Fa auditstr ,
-returning the resulting mask, if valid, via
-.Fa *masks .
-.Pp
-The
-.Fn getauditflagschar
-function
-converts the audit event mask passed via
-.Fa *masks
-and converts it to a character string in a buffer pointed to by
-.Fa auditstr .
-See the
-.Sx BUGS
-section for more information on how to provide a buffer of
-sufficient size.
-If the
-.Fa verbose
-flag is set, the class description string retrieved from
-.Xr audit_class 5
-will be used; otherwise, the two-character class name.
-.Sh IMPLEMENTATION NOTES
-The
-.Fn au_preselect
-function
-makes implicit use of various audit database routines, and may influence
-the behavior of simultaneous or interleaved processing of those databases by
-other code.
-.Sh RETURN VALUES
-The
-.Fn au_preselect
-function
-returns 0 on success, or returns \-1 if there is a failure looking up the
-event type or other database access, in which case
-.Va errno
-will be set to indicate the error.
-It returns 1 if the event is matched; 0 if not.
-.Pp
-.Rv -std getauditflagsbin getauditflagschar
-.Sh SEE ALSO
-.Xr libbsm 3 ,
-.Xr audit_class 5
-.Sh HISTORY
-The OpenBSM implementation was created by McAfee Research, the security
-division of McAfee Inc., under contract to Apple Computer, Inc., in 2004.
-It was subsequently adopted by the TrustedBSD Project as the foundation for
-the OpenBSM distribution.
-.Sh AUTHORS
-.An -nosplit
-This software was created by
-.An Robert Watson ,
-.An Wayne Salamon ,
-and
-.An Suresh Krishnaswamy
-for McAfee Research, the security research division of McAfee,
-Inc., under contract to Apple Computer, Inc.
-.Pp
-The Basic Security Module (BSM) interface to audit records and audit event
-stream format were defined by Sun Microsystems.
-.Sh BUGS
-The
-.Va errno
-variable
-may not always be properly set in the event of an error.
-.Pp
-The
-.Fn getauditflagschar
-function
-does not provide a way to indicate how long the character buffer is, in order
-to detect overflow.
-As a result, the caller must always provide a buffer of sufficient length for
-any possible mask, which may be calculated as three times the number of
-non-zero bits in the mask argument in the event non-verbose class names are
-used, and is not trivially predictable for verbose class names.
-This API should be replaced with a more robust one.
Copied: vendor/openbsm/1.2_alpha4/libbsm/au_mask.3 (from rev 11163, vendor/openbsm/dist/libbsm/au_mask.3)
===================================================================
--- vendor/openbsm/1.2_alpha4/libbsm/au_mask.3 (rev 0)
+++ vendor/openbsm/1.2_alpha4/libbsm/au_mask.3 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,154 @@
+.\"-
+.\" Copyright (c) 2005 Robert N. M. Watson
+.\" All rights reserved.
+.\"
+.\" Redistribution and use in source and binary forms, with or without
+.\" modification, are permitted provided that the following conditions
+.\" are met:
+.\" 1. Redistributions of source code must retain the above copyright
+.\" notice, this list of conditions and the following disclaimer.
+.\" 2. Redistributions in binary form must reproduce the above copyright
+.\" notice, this list of conditions and the following disclaimer in the
+.\" documentation and/or other materials provided with the distribution.
+.\"
+.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+.\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+.\" SUCH DAMAGE.
+.\"
+.Dd April 19, 2005
+.Dt AU_MASK 3
+.Os
+.Sh NAME
+.Nm au_preselect ,
+.Nm getauditflagsbin ,
+.Nm getauditflagschar
+.Nd "convert between string and numeric values of audit masks"
+.Sh LIBRARY
+.Lb libbsm
+.Sh SYNOPSIS
+.In bsm/libbsm.h
+.Ft int
+.Fn au_preselect "au_event_t event" "au_mask_t *mask_p" "int sorf" "int flag"
+.Ft int
+.Fn getauditflagsbin "char *auditstr" "au_mask_t *masks"
+.Ft int
+.Fn getauditflagschar "char *auditstr" "au_mask_t *masks" "int verbose"
+.Sh DESCRIPTION
+These interfaces support processing of an audit mask represented by type
+.Vt au_mask_t ,
+including conversion between numeric and text formats, and computing whether
+or not an event is matched by a mask.
+.Pp
+The
+.Fn au_preselect
+function
+calculates whether or not the audit event passed via
+.Fa event
+is matched by the audit mask passed via
+.Fa mask_p .
+The
+.Fa sorf
+argument indicates whether or not to consider the event as a success,
+if the
+.Dv AU_PRS_SUCCESS
+flag is set, or failure, if the
+.Dv AU_PRS_FAILURE
+flag is set.
+The
+.Fa flag
+argument accepts additional arguments influencing the behavior of
+.Fn au_preselect ,
+including
+.Dv AU_PRS_REREAD ,
+which causes the event to be re-looked up rather than read from the cache,
+or
+.Dv AU_PRS_USECACHE
+which forces use of the cache.
+.Pp
+The
+.Fn getauditflagsbin
+function
+converts a string representation of an audit mask passed via a character
+string pointed to by
+.Fa auditstr ,
+returning the resulting mask, if valid, via
+.Fa *masks .
+.Pp
+The
+.Fn getauditflagschar
+function
+converts the audit event mask passed via
+.Fa *masks
+and converts it to a character string in a buffer pointed to by
+.Fa auditstr .
+See the
+.Sx BUGS
+section for more information on how to provide a buffer of
+sufficient size.
+If the
+.Fa verbose
+flag is set, the class description string retrieved from
+.Xr audit_class 5
+will be used; otherwise, the two-character class name.
+.Sh IMPLEMENTATION NOTES
+The
+.Fn au_preselect
+function
+makes implicit use of various audit database routines, and may influence
+the behavior of simultaneous or interleaved processing of those databases by
+other code.
+.Sh RETURN VALUES
+The
+.Fn au_preselect
+function
+returns 0 on success, or returns \-1 if there is a failure looking up the
+event type or other database access, in which case
+.Va errno
+will be set to indicate the error.
+It returns 1 if the event is matched; 0 if not.
+.Pp
+.Rv -std getauditflagsbin getauditflagschar
+.Sh SEE ALSO
+.Xr libbsm 3 ,
+.Xr audit_class 5
+.Sh HISTORY
+The OpenBSM implementation was created by McAfee Research, the security
+division of McAfee Inc., under contract to Apple Computer, Inc., in 2004.
+It was subsequently adopted by the TrustedBSD Project as the foundation for
+the OpenBSM distribution.
+.Sh AUTHORS
+.An -nosplit
+This software was created by
+.An Robert Watson ,
+.An Wayne Salamon ,
+and
+.An Suresh Krishnaswamy
+for McAfee Research, the security research division of McAfee,
+Inc., under contract to Apple Computer, Inc.
+.Pp
+The Basic Security Module (BSM) interface to audit records and audit event
+stream format were defined by Sun Microsystems.
+.Sh BUGS
+The
+.Va errno
+variable
+may not always be properly set in the event of an error.
+.Pp
+The
+.Fn getauditflagschar
+function
+does not provide a way to indicate how long the character buffer is, in order
+to detect overflow.
+As a result, the caller must always provide a buffer of sufficient length for
+any possible mask, which may be calculated as three times the number of
+non-zero bits in the mask argument in the event non-verbose class names are
+used, and is not trivially predictable for verbose class names.
+This API should be replaced with a more robust one.
Copied: vendor/openbsm/1.2_alpha4/libbsm/au_notify.3 (from rev 11163, vendor/openbsm/dist/libbsm/au_notify.3)
===================================================================
--- vendor/openbsm/1.2_alpha4/libbsm/au_notify.3 (rev 0)
+++ vendor/openbsm/1.2_alpha4/libbsm/au_notify.3 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,118 @@
+.\"-
+.\" Copyright (c) 2004-2009 Apple Inc.
+.\" Copyright (c) 2015 Christian Brueffer
+.\" All rights reserved.
+.\"
+.\" Redistribution and use in source and binary forms, with or without
+.\" modification, are permitted provided that the following conditions
+.\" are met:
+.\" 1. Redistributions of source code must retain the above copyright
+.\" notice, this list of conditions and the following disclaimer.
+.\" 2. Redistributions in binary form must reproduce the above copyright
+.\" notice, this list of conditions and the following disclaimer in the
+.\" documentation and/or other materials provided with the distribution.
+.\" 3. Neither the name of the author nor the names of
+.\" its contributors may be used to endorse or promote products derived
+.\" from this software without specific prior written permission.
+.\"
+.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+.\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+.\" SUCH DAMAGE.
+.\"
+.Dd July 29, 2015
+.Dt AU_NOTIFY 3
+.Os
+.Sh NAME
+.Nm au_get_state ,
+.Nm au_notify_initialize ,
+.Nm au_notify_terminate
+.Nd "audit event notification"
+.Sh LIBRARY
+.Lb libbsm
+.Sh SYNOPSIS
+.In bsm/libbsm.h
+.Ft int
+.Fn au_get_state "void"
+.Ft uint32_t
+.Fn au_notify_initialize "void"
+.Ft int
+.Fn au_notify_terminate "void"
+.Sh DESCRIPTION
+The
+.Nm au_notify
+audit notification API tracks audit state in a form permitting efficient
+update, avoiding frequent system calls to check the kernel audit state.
+It is implemented only for Darwin/Mac OS X.
+.Pp
+The
+.Fn au_get_state
+function provides a lightweight way to check whether or not auditing is
+enabled.
+If a client wants to use this function to determine whether an entire
+series of audit calls should be made -- as in the common case of a caller
+building a set of tokens, then writing them -- it should cache the audit
+status in a local variable.
+This function always returns the current state of auditing.
+If audit notification has not already been initialized by calling
+.Fn au_notify_initialize
+it will be automatically initialized on the first call of
+this function.
+.Pp
+The
+.Fn au_notify_initialize
+function initializes audit notification.
+.Pp
+The
+.Fn au_notify_terminate
+function cancels audit notification and frees the resources associated with it.
+Responsible code that no longer needs to use
+.Fn au_get_state
+should call this function.
+.Sh RETURN VALUES
+If no error occurred the
+.Fn au_get_state
+function returns
+.Dv AUC_NOAUDIT
+if auditing is disabled or suspended, and
+.Dv AUC_AUDITING
+if auditing is enabled and active.
+Otherwise, the function can return any of the errno values defined for
+.Xr setaudit 2 ,
+or
+.Dv AU_UNIMPL
+if audit does not appear to be supported by the system.
+.Pp
+The
+.Fn au_notify_initialize
+function returns 0 on success,
+.Dv AU_UNIMPL
+if audit does not appear to be supported by the system,
+or one of the status codes defined in
+.In notify.h
+on Mac OS X to indicate the error.
+.Pp
+The
+.Fn au_notify_terminate
+function returns 0 on success, or \-1 on failure.
+.Sh SEE ALSO
+.Xr libbsm 3 ,
+.Xr notify 3 (Mac OS X)
+.Sh HISTORY
+The OpenBSM implementation was created by McAfee Research, the security
+division of McAfee Inc., under contract to Apple Computer, Inc., in 2004.
+It was subsequently adopted by the TrustedBSD Project as the foundation for
+the OpenBSM distribution.
+.Sh AUTHORS
+This software was created by
+.An Apple Computer, Inc .
+.Pp
+The Basic Security Module (BSM) interface to audit records and audit event
+stream format were defined by Sun Microsystems.
Deleted: vendor/openbsm/1.2_alpha4/libbsm/au_open.3
===================================================================
--- vendor/openbsm/dist/libbsm/au_open.3 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/libbsm/au_open.3 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,158 +0,0 @@
-.\"-
-.\" Copyright (c) 2006 Robert N. M. Watson
-.\" All rights reserved.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\" notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\" notice, this list of conditions and the following disclaimer in the
-.\" documentation and/or other materials provided with the distribution.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
-.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-.\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
-.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-.\" SUCH DAMAGE.
-.\"
-.\" $P4: //depot/projects/trustedbsd/openbsm/libbsm/au_open.3#8 $
-.\"
-.Dd March 4, 2006
-.Dt AU_OPEN 3
-.Os
-.Sh NAME
-.Nm au_close ,
-.Nm au_close_buffer ,
-.Nm au_close_token ,
-.Nm au_open ,
-.Nm au_write
-.Nd "create and commit audit records"
-.Sh LIBRARY
-.Lb libbsm
-.Sh SYNOPSIS
-.In bsm/libbsm.h
-.Ft int
-.Fn au_open void
-.Ft int
-.Fn au_write "int d" "token_t *tok"
-.Ft int
-.Fn au_close "int d" "int keep" "short event"
-.Ft int
-.Fn au_close_buffer "int d" "short event" "u_char *buffer" "size_t *buflen"
-.Ft int
-.Fn au_close_token "token_t *tok" "u_char *buffer" "size_t *buflen"
-.Sh DESCRIPTION
-These interfaces allow applications to allocate audit records, construct a
-record using a series of tokens, and commit the audit record to the system
-event log.
-An extension API is also provided to commit the record to an in-memory
-buffer rather than the system audit log.
-.Pp
-The
-.Fn au_open
-interface allocates a new audit record descriptor.
-.Pp
-The
-.Fn au_write
-interface adds a token to an allocated audit descriptor.
-When a token has been successfully added to a record, the caller no longer
-owns the token memory, and does not need to free it directly via a call to
-.Xr au_free_token 3 .
-.Pp
-The
-.Fn au_close
-function is used to commit an audit record to the system audit log, or
-abandon the record.
-In either cases, all resources associated with the record will be released.
-The
-.Fa keep
-argument determines the behavior: a value of
-.Dv AU_TO_WRITE
-causes the record to be committed; a value of
-.Dv AU_TO_NO_WRITE
-causes it to be abandoned.
-When the audit record is committed, a BSM header will be inserted before
-tokens added to the record, using the event identifier passed via
-.Fa event ,
-and a trailer added to the end.
-Committing a record to the system audit log requires privilege.
-.Pp
-The
-.Fn au_close_buffer
-function writes the resulting record to an in-memory buffer of size
-.Fa *buflen ;
-it will write back the filled buffer length into the same variable.
-The argument
-.Fa event
-is the event identifier to use in the record header.
-.Pp
-The
-.Fn au_close_token
-function generates the BSM stream output for a single token,
-.Fa tok ,
-in the passed buffer
-.Fa buffer .
-The initial buffer size and resulting data size are passed via
-.Fa *buflen .
-The
-.Fn au_close_token
-function
-will free the token before returning.
-.Sh RETURN VALUES
-The function
-.Fn au_open
-returns a non-negative audit record descriptor number on success, or a
-negative value on failure, along with error information in
-.Va errno .
-.Pp
-The functions
-.Fn au_write ,
-.Fn au_close ,
-.Fn au_close_buffer ,
-and
-.Fn au_close_token
-return 0 on success, or a negative value on failure, along with error
-information in
-.Va errno .
-.Sh SEE ALSO
-.Xr audit_submit 3 ,
-.Xr libbsm 3
-.Sh HISTORY
-The OpenBSM implementation was created by McAfee Research, the security
-division of McAfee Inc., under contract to Apple Computer, Inc., in 2004.
-It was subsequently adopted by the TrustedBSD Project as the foundation for
-the OpenBSM distribution.
-.Sh AUTHORS
-.An -nosplit
-This software was created by
-.An Robert Watson ,
-.An Wayne Salamon ,
-and
-.An Suresh Krishnaswamy
-for McAfee Research, the security research division of McAfee,
-Inc., under contract to Apple Computer, Inc.
-.Pp
-The Basic Security Module (BSM) interface to audit records and audit event
-stream format were defined by Sun Microsystems.
-.Sh BUGS
-Currently,
-.Fn au_open
-does not reserve kernel resources necessary to commit the record to the
-trail; on systems supporting
-.Fn au_close ,
-the call will block until resources are available to commit the record.
-However, this leads to the possibility of an action being permitted without
-the record being guaranteed to go to disk.
-Ideally,
-.Fn au_open
-would reserve resources necessary to commit any submitted record, releasing
-them on
-.Fn au_close .
Copied: vendor/openbsm/1.2_alpha4/libbsm/au_open.3 (from rev 11163, vendor/openbsm/dist/libbsm/au_open.3)
===================================================================
--- vendor/openbsm/1.2_alpha4/libbsm/au_open.3 (rev 0)
+++ vendor/openbsm/1.2_alpha4/libbsm/au_open.3 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,156 @@
+.\"-
+.\" Copyright (c) 2006 Robert N. M. Watson
+.\" All rights reserved.
+.\"
+.\" Redistribution and use in source and binary forms, with or without
+.\" modification, are permitted provided that the following conditions
+.\" are met:
+.\" 1. Redistributions of source code must retain the above copyright
+.\" notice, this list of conditions and the following disclaimer.
+.\" 2. Redistributions in binary form must reproduce the above copyright
+.\" notice, this list of conditions and the following disclaimer in the
+.\" documentation and/or other materials provided with the distribution.
+.\"
+.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+.\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+.\" SUCH DAMAGE.
+.\"
+.Dd March 4, 2006
+.Dt AU_OPEN 3
+.Os
+.Sh NAME
+.Nm au_close ,
+.Nm au_close_buffer ,
+.Nm au_close_token ,
+.Nm au_open ,
+.Nm au_write
+.Nd "create and commit audit records"
+.Sh LIBRARY
+.Lb libbsm
+.Sh SYNOPSIS
+.In bsm/libbsm.h
+.Ft int
+.Fn au_open void
+.Ft int
+.Fn au_write "int d" "token_t *tok"
+.Ft int
+.Fn au_close "int d" "int keep" "short event"
+.Ft int
+.Fn au_close_buffer "int d" "short event" "u_char *buffer" "size_t *buflen"
+.Ft int
+.Fn au_close_token "token_t *tok" "u_char *buffer" "size_t *buflen"
+.Sh DESCRIPTION
+These interfaces allow applications to allocate audit records, construct a
+record using a series of tokens, and commit the audit record to the system
+event log.
+An extension API is also provided to commit the record to an in-memory
+buffer rather than the system audit log.
+.Pp
+The
+.Fn au_open
+interface allocates a new audit record descriptor.
+.Pp
+The
+.Fn au_write
+interface adds a token to an allocated audit descriptor.
+When a token has been successfully added to a record, the caller no longer
+owns the token memory, and does not need to free it directly via a call to
+.Xr au_free_token 3 .
+.Pp
+The
+.Fn au_close
+function is used to commit an audit record to the system audit log, or
+abandon the record.
+In either cases, all resources associated with the record will be released.
+The
+.Fa keep
+argument determines the behavior: a value of
+.Dv AU_TO_WRITE
+causes the record to be committed; a value of
+.Dv AU_TO_NO_WRITE
+causes it to be abandoned.
+When the audit record is committed, a BSM header will be inserted before
+tokens added to the record, using the event identifier passed via
+.Fa event ,
+and a trailer added to the end.
+Committing a record to the system audit log requires privilege.
+.Pp
+The
+.Fn au_close_buffer
+function writes the resulting record to an in-memory buffer of size
+.Fa *buflen ;
+it will write back the filled buffer length into the same variable.
+The argument
+.Fa event
+is the event identifier to use in the record header.
+.Pp
+The
+.Fn au_close_token
+function generates the BSM stream output for a single token,
+.Fa tok ,
+in the passed buffer
+.Fa buffer .
+The initial buffer size and resulting data size are passed via
+.Fa *buflen .
+The
+.Fn au_close_token
+function
+will free the token before returning.
+.Sh RETURN VALUES
+The function
+.Fn au_open
+returns a non-negative audit record descriptor number on success, or a
+negative value on failure, along with error information in
+.Va errno .
+.Pp
+The functions
+.Fn au_write ,
+.Fn au_close ,
+.Fn au_close_buffer ,
+and
+.Fn au_close_token
+return 0 on success, or a negative value on failure, along with error
+information in
+.Va errno .
+.Sh SEE ALSO
+.Xr audit_submit 3 ,
+.Xr libbsm 3
+.Sh HISTORY
+The OpenBSM implementation was created by McAfee Research, the security
+division of McAfee Inc., under contract to Apple Computer, Inc., in 2004.
+It was subsequently adopted by the TrustedBSD Project as the foundation for
+the OpenBSM distribution.
+.Sh AUTHORS
+.An -nosplit
+This software was created by
+.An Robert Watson ,
+.An Wayne Salamon ,
+and
+.An Suresh Krishnaswamy
+for McAfee Research, the security research division of McAfee,
+Inc., under contract to Apple Computer, Inc.
+.Pp
+The Basic Security Module (BSM) interface to audit records and audit event
+stream format were defined by Sun Microsystems.
+.Sh BUGS
+Currently,
+.Fn au_open
+does not reserve kernel resources necessary to commit the record to the
+trail; on systems supporting
+.Fn au_close ,
+the call will block until resources are available to commit the record.
+However, this leads to the possibility of an action being permitted without
+the record being guaranteed to go to disk.
+Ideally,
+.Fn au_open
+would reserve resources necessary to commit any submitted record, releasing
+them on
+.Fn au_close .
Copied: vendor/openbsm/1.2_alpha4/libbsm/au_socket_type.3 (from rev 11163, vendor/openbsm/dist/libbsm/au_socket_type.3)
===================================================================
--- vendor/openbsm/1.2_alpha4/libbsm/au_socket_type.3 (rev 0)
+++ vendor/openbsm/1.2_alpha4/libbsm/au_socket_type.3 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,91 @@
+.\"-
+.\" Copyright (c) 2008 Apple Inc.
+.\" All rights reserved.
+.\"
+.\" Redistribution and use in source and binary forms, with or without
+.\" modification, are permitted provided that the following conditions
+.\" are met:
+.\" 1. Redistributions of source code must retain the above copyright
+.\" notice, this list of conditions and the following disclaimer.
+.\" 2. Redistributions in binary form must reproduce the above copyright
+.\" notice, this list of conditions and the following disclaimer in the
+.\" documentation and/or other materials provided with the distribution.
+.\" 3. Neither the name of Apple Inc. ("Apple") nor the names of
+.\" its contributors may be used to endorse or promote products derived
+.\" from this software without specific prior written permission.
+.\"
+.\" THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND
+.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+.\" ARE DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR
+.\" ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+.\" STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+.\" IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+.\" POSSIBILITY OF SUCH DAMAGE.
+.\"
+.Dd December 28, 2008
+.Dt AU_BSM_TO_SOCKET_TYPE 3
+.Os
+.Sh NAME
+.Nm au_bsm_to_socket_type ,
+.Nm au_socket_type_to_bsm
+.Nd "convert between BSM and local socket types"
+.Sh LIBRARY
+.Lb libbsm
+.Sh SYNOPSIS
+.In bsm/libbsm.h
+.Ft int
+.Fn au_bsm_to_socket_type "u_short bsm_socket_type" "int *local_socket_typep"
+.Ft u_short
+.Fn au_socket_type_to_bsm "int local_socket_type"
+.Sh DESCRIPTION
+These interfaces may be used to convert between the local and BSM socket
+types.
+The
+.Fn au_bsm_to_socket_type
+function accepts a BSM socket type,
+.Fa bsm_socket_type ,
+and converts it to a local socket type, such as those passed to
+.Xr socket 2 ,
+that will be stored in the integer pointed to by
+.Fa local_socket_typep
+if successful.
+This call will fail if the BSM socket type cannot be mapped into a local
+socket type, which may occur if the socket token was generated on another
+operating system.
+.Pp
+.Fn au_socket_type_to_bsm
+function accepts a local socket type, and returns the BSM socket type for it.
+This call cannot fail, and instead returns a BSM socket type indicating to a
+later decoder that the socket type could not be encoded.
+.Sh RETURN VALULES
+On success,
+.Fn au_bsm_to_socket_type
+returns 0 and a converted socket type; on failure, it returns -1 but does not
+set
+.Xr errno 2 .
+.Pp
+On success,
+.Fn au_strerror
+returns a pointer to an error string; on failure it will return
+.Dv NULL .
+.Sh SEE ALSO
+.Xr au_bsm_to_domain 3 ,
+.Xr au_domain_to_bsm 3 ,
+.Xr au_to_socket_ex 3 ,
+.Xr libbsm 3
+.Sh HISTORY
+.Fn au_bsm_to_socket_type
+and
+.Fn au_socket_type_to_bsm
+were introduced in OpenBSM 1.1.
+.Sh AUTHORS
+These functions were implemented by
+.An Robert Watson
+under contract to Apple Inc.
+.Pp
+The Basic Security Module (BSM) interface to audit records and audit event
+stream format were defined by Sun Microsystems.
Deleted: vendor/openbsm/1.2_alpha4/libbsm/au_token.3
===================================================================
--- vendor/openbsm/dist/libbsm/au_token.3 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/libbsm/au_token.3 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,235 +0,0 @@
-.\"-
-.\" Copyright (c) 2005-2007 Robert N. M. Watson
-.\" All rights reserved.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\" notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\" notice, this list of conditions and the following disclaimer in the
-.\" documentation and/or other materials provided with the distribution.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
-.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-.\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
-.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-.\" SUCH DAMAGE.
-.\"
-.\" $P4: //depot/projects/trustedbsd/openbsm/libbsm/au_token.3#13 $
-.\"
-.Dd April 19, 2005
-.Dt AU_TOKEN 3
-.Os
-.Sh NAME
-.Nm au_to_arg32 ,
-.Nm au_to_arg64 ,
-.Nm au_to_arg ,
-.Nm au_to_attr64 ,
-.Nm au_to_data ,
-.Nm au_to_exit ,
-.Nm au_to_groups ,
-.Nm au_to_newgroups ,
-.Nm au_to_in_addr ,
-.Nm au_to_in_addr_ex ,
-.Nm au_to_ip ,
-.Nm au_to_ipc ,
-.Nm au_to_ipc_perm ,
-.Nm au_to_iport ,
-.Nm au_to_opaque ,
-.Nm au_to_file ,
-.Nm au_to_text ,
-.Nm au_to_path ,
-.Nm au_to_process32 ,
-.Nm au_to_process64 ,
-.Nm au_to_process ,
-.Nm au_to_process32_ex ,
-.Nm au_to_process64_ex ,
-.Nm au_to_process_ex ,
-.Nm au_to_return32 ,
-.Nm au_to_return64 ,
-.Nm au_to_return ,
-.Nm au_to_seq ,
-.Nm au_to_sock_inet32 ,
-.Nm au_to_sock_inet128 ,
-.Nm au_to_sock_inet ,
-.Nm au_to_subject32 ,
-.Nm au_to_subject64 ,
-.Nm au_to_subject ,
-.Nm au_to_subject32_ex ,
-.Nm au_to_subject64_ex ,
-.Nm au_to_subject_ex ,
-.Nm au_to_me ,
-.Nm au_to_exec_args ,
-.Nm au_to_exec_env ,
-.Nm au_to_header ,
-.Nm au_to_header32 ,
-.Nm au_to_header64 ,
-.Nm au_to_trailer ,
-.Nm au_to_zonename
-.Nd "routines for generating BSM audit tokens"
-.Sh LIBRARY
-.Lb libbsm
-.Sh SYNOPSIS
-.In bsm/libbsm.h
-.Ft "token_t *"
-.Fn au_to_arg32 "char n" "char *text" "u_int32_t v"
-.Ft "token_t *"
-.Fn au_to_arg64 "char n" "char *text" "u_int64_t v"
-.Ft "token_t *"
-.Fn au_to_arg "char n" "char *text" "u_int32_t v"
-.Ft "token_t *"
-.Fn au_to_attr32 "struct vattr *attr"
-.Ft "token_t *"
-.Fn au_to_attr64 "struct vattr *attr"
-.Ft "token_t *"
-.Fn au_to_attr "struct vattr *attr"
-.Ft "token_t *"
-.Fn au_to_data "char unit_print" "char unit_type" "char unit_count" "char *p"
-.Ft "token_t *"
-.Fn au_to_exit "int retval" "int err"
-.Ft "token_t *"
-.Fn au_to_groups "int *groups"
-.Ft "token_t *"
-.Fn au_to_newgroups "u_int16_t n" "gid_t *groups"
-.Ft "token_t *"
-.Fn au_to_in_addr "struct in_addr *internet_addr"
-.Ft "token_t *"
-.Fn au_to_in_addr_ex "struct in6_addr *internet_addr"
-.Ft "token_t *"
-.Fn au_to_ip "struct ip *ip"
-.Ft "token_t *"
-.Fn au_to_ipc "char type" "int id"
-.Ft "token_t *"
-.Fn au_to_ipc_perm "struct ipc_perm *perm"
-.Ft "token_t *"
-.Fn au_to_iport "u_int16_t iport"
-.Ft "token_t *"
-.Fn au_to_opaque "char *data" "u_int16_t bytes"
-.Ft "token_t *"
-.Fn au_to_file "char *file" "struct timeval tm"
-.Ft "token_t *"
-.Fn au_to_text "char *text"
-.Ft "token_t *"
-.Fn au_to_path "char *text"
-.Ft "token_t *"
-.Fo au_to_process32
-.Fa "au_id_t auid" "uid_t euid" "gid_t egid" "uid_t ruid"
-.Fa "gid_t rgid" "pid_t pid" "au_asid_t sid" "au_tid_t *tid"
-.Fc
-.Ft "token_t *"
-.Fo au_to_process64
-.Fa "au_id_t auid" "uid_t euid" "gid_t egid" "uid_t ruid"
-.Fa "gid_t rgid" "pid_t pid" "au_asid_t sid" "au_tid_t *tid"
-.Fc
-.Ft "token_t *"
-.Fo au_to_process32_ex
-.Fa "au_id_t auid" "uid_t euid" "gid_t egid" "uid_t ruid"
-.Fa "gid_t rgid" "pid_t pid" "au_asid_t sid" "au_tid_addr_t *tid"
-.Fc
-.Ft "token_t *"
-.Fo au_to_process64_ex
-.Fa "au_id_t auid" "uid_t euid" "gid_t egid" "uid_t ruid"
-.Fa "gid_t rgid" "pid_t pid" "au_asid_t sid" "au_tid_addr_t *tid"
-.Fc
-.Ft "token_t *"
-.Fn au_to_return32 "char status" "u_int32_t ret"
-.Ft "token_t *"
-.Fn au_to_return64 "char status" "u_int64_t ret"
-.Ft "token_t *"
-.Fn au_to_return "char status" "u_int32_t ret"
-.Ft "token_t *"
-.Fn au_to_seq "long audit_count"
-.Ft "token_t *"
-.Fn au_to_sock_inet32 "struct sockaddr_in *so"
-.Ft "token_t *"
-.Fn au_to_sock_inet128 "struct sockaddr_in6 *so"
-.Ft "token_t *"
-.Fn au_to_sock_int "struct sockaddr_in *so"
-.Ft "token_t *"
-.Fo au_to_subject32
-.Fa "au_id_t auid" "uid_t euid" "gid_t egid" "uid_t ruid"
-.Fa "gid_t rgid" "pid_t pid" "au_asid_t sid" "au_tid_t *tid"
-.Fc
-.Ft "token_t *"
-.Fo au_to_subject64
-.Fa "au_id_t auid" "uid_t euid" "gid_t egid" "uid_t ruid"
-.Fa "gid_t rgid" "pid_t pid" "au_asid_t sid" "au_tid_t *tid"
-.Fc
-.Ft "token_t *"
-.Fo au_to_subject
-.Fa "au_id_t auid" "uid_t euid" "gid_t egid" "uid_t ruid"
-.Fa "gid_t rgid" "pid_t pid" "au_asid_t sid" "au_tid_t *tid"
-.Fc
-.Ft "token_t *"
-.Fo au_to_subject32_ex
-.Fa "au_id_t auid" "uid_t euid" "gid_t egid" "uid_t ruid"
-.Fa "gid_t rgid" "pid_t pid" "au_asid_t sid" "au_tid_addr_t *tid"
-.Fc
-.Ft "token_t *"
-.Fo au_to_subject64_ex
-.Fa "au_id_t auid" "uid_t euid" "gid_t egid" "uid_t ruid"
-.Fa "gid_t rgid" "pid_t pid" "au_asid_t sid" "au_tid_addr_t *tid"
-.Fc
-.Ft "token_t *"
-.Fo au_to_subject_ex
-.Fa "au_id_t auid" "uid_t euid" "gid_t egid" "uid_t ruid"
-.Fa "gid_t rgid" "pid_t pid" "au_asid_t sid" "au_tid_addr_t *tid"
-.Fc
-.Ft "token_t *"
-.Fn au_to_me void
-.Ft "token_t *"
-.Fn au_to_exec_args "char **argv"
-.Ft "token_t *"
-.Fn au_to_exec_env "char **envp"
-.Ft "token_t *"
-.Fn au_to_header "int rec_size" "au_event_t e_type" "au_emod_t emod"
-.Ft "token_t *"
-.Fn au_to_header32 "int rec_size" "au_event_t e_type" "au_emod_t emod"
-.Ft "token_t *"
-.Fn au_to_header64 "int rec_size" "au_event_t e_type" "au_emod_t e_mod"
-.Ft "token_t *"
-.Fn au_to_trailer "int rec_size"
-.Ft "token_t *"
-.Fn au_to_zonename "char *zonename"
-.Sh DESCRIPTION
-These interfaces support the allocation of BSM audit tokens, represented by
-.Vt token_t ,
-for various data types.
-.Sh RETURN VALUES
-On success, a pointer to a
-.Vt token_t
-will be returned; the allocated
-.Vt token_t
-can be freed via a call to
-.Xr au_free_token 3 .
-On failure,
-.Dv NULL
-will be returned, and an error condition returned via
-.Va errno .
-.Sh SEE ALSO
-.Xr libbsm 3
-.Sh HISTORY
-The OpenBSM implementation was created by McAfee Research, the security
-division of McAfee Inc., under contract to Apple Computer, Inc., in 2004.
-It was subsequently adopted by the TrustedBSD Project as the foundation for
-the OpenBSM distribution.
-.Sh AUTHORS
-.An -nosplit
-This software was created by
-.An Robert Watson ,
-.An Wayne Salamon ,
-and
-.An Suresh Krishnaswamy
-for McAfee Research, the security research division of McAfee,
-Inc., under contract to Apple Computer, Inc.
-.Pp
-The Basic Security Module (BSM) interface to audit records and audit event
-stream format were defined by Sun Microsystems.
Copied: vendor/openbsm/1.2_alpha4/libbsm/au_token.3 (from rev 11163, vendor/openbsm/dist/libbsm/au_token.3)
===================================================================
--- vendor/openbsm/1.2_alpha4/libbsm/au_token.3 (rev 0)
+++ vendor/openbsm/1.2_alpha4/libbsm/au_token.3 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,252 @@
+.\"-
+.\" Copyright (c) 2005-2007 Robert N. M. Watson
+.\" All rights reserved.
+.\"
+.\" Redistribution and use in source and binary forms, with or without
+.\" modification, are permitted provided that the following conditions
+.\" are met:
+.\" 1. Redistributions of source code must retain the above copyright
+.\" notice, this list of conditions and the following disclaimer.
+.\" 2. Redistributions in binary form must reproduce the above copyright
+.\" notice, this list of conditions and the following disclaimer in the
+.\" documentation and/or other materials provided with the distribution.
+.\"
+.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+.\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+.\" SUCH DAMAGE.
+.\"
+.Dd April 19, 2005
+.Dt AU_TOKEN 3
+.Os
+.Sh NAME
+.Nm au_to_arg32 ,
+.Nm au_to_arg64 ,
+.Nm au_to_arg ,
+.Nm au_to_attr64 ,
+.Nm au_to_data ,
+.Nm au_to_exit ,
+.Nm au_to_groups ,
+.Nm au_to_newgroups ,
+.Nm au_to_in_addr ,
+.Nm au_to_in_addr_ex ,
+.Nm au_to_ip ,
+.Nm au_to_ipc ,
+.Nm au_to_ipc_perm ,
+.Nm au_to_iport ,
+.Nm au_to_opaque ,
+.Nm au_to_file ,
+.Nm au_to_text ,
+.Nm au_to_path ,
+.Nm au_to_process32 ,
+.Nm au_to_process64 ,
+.Nm au_to_process ,
+.Nm au_to_process32_ex ,
+.Nm au_to_process64_ex ,
+.Nm au_to_process_ex ,
+.Nm au_to_return32 ,
+.Nm au_to_return64 ,
+.Nm au_to_return ,
+.Nm au_to_seq ,
+.Nm au_to_sock_inet32 ,
+.Nm au_to_sock_inet128 ,
+.Nm au_to_sock_inet ,
+.Nm au_to_socket_ex ,
+.Nm au_to_subject32 ,
+.Nm au_to_subject64 ,
+.Nm au_to_subject ,
+.Nm au_to_subject32_ex ,
+.Nm au_to_subject64_ex ,
+.Nm au_to_subject_ex ,
+.Nm au_to_me ,
+.Nm au_to_exec_args ,
+.Nm au_to_exec_env ,
+.Nm au_to_header ,
+.Nm au_to_header32 ,
+.Nm au_to_header64 ,
+.Nm au_to_header_ex ,
+.Nm au_to_header32_ex ,
+.Nm au_to_trailer ,
+.Nm au_to_zonename
+.Nd "routines for generating BSM audit tokens"
+.Sh LIBRARY
+.Lb libbsm
+.Sh SYNOPSIS
+.In bsm/libbsm.h
+.Ft "token_t *"
+.Fn au_to_arg32 "char n" "const char *text" "u_int32_t v"
+.Ft "token_t *"
+.Fn au_to_arg64 "char n" "const char *text" "u_int64_t v"
+.Ft "token_t *"
+.Fn au_to_arg "char n" "const char *text" "u_int32_t v"
+.Ft "token_t *"
+.Fn au_to_attr32 "struct vattr *attr"
+.Ft "token_t *"
+.Fn au_to_attr64 "struct vattr *attr"
+.Ft "token_t *"
+.Fn au_to_attr "struct vattr *attr"
+.Ft "token_t *"
+.Fn au_to_data "char unit_print" "char unit_type" "char unit_count" "const char *p"
+.Ft "token_t *"
+.Fn au_to_exit "int retval" "int err"
+.Ft "token_t *"
+.Fn au_to_groups "int *groups"
+.Ft "token_t *"
+.Fn au_to_newgroups "u_int16_t n" "gid_t *groups"
+.Ft "token_t *"
+.Fn au_to_in_addr "struct in_addr *internet_addr"
+.Ft "token_t *"
+.Fn au_to_in_addr_ex "struct in6_addr *internet_addr"
+.Ft "token_t *"
+.Fn au_to_ip "struct ip *ip"
+.Ft "token_t *"
+.Fn au_to_ipc "char type" "int id"
+.Ft "token_t *"
+.Fn au_to_ipc_perm "struct ipc_perm *perm"
+.Ft "token_t *"
+.Fn au_to_iport "u_int16_t iport"
+.Ft "token_t *"
+.Fn au_to_opaque "const char *data" "u_int16_t bytes"
+.Ft "token_t *"
+.Fn au_to_file "const char *file" "struct timeval tm"
+.Ft "token_t *"
+.Fn au_to_text "const char *text"
+.Ft "token_t *"
+.Fn au_to_path "const char *text"
+.Ft "token_t *"
+.Fo au_to_process32
+.Fa "au_id_t auid" "uid_t euid" "gid_t egid" "uid_t ruid"
+.Fa "gid_t rgid" "pid_t pid" "au_asid_t sid" "au_tid_t *tid"
+.Fc
+.Ft "token_t *"
+.Fo au_to_process64
+.Fa "au_id_t auid" "uid_t euid" "gid_t egid" "uid_t ruid"
+.Fa "gid_t rgid" "pid_t pid" "au_asid_t sid" "au_tid_t *tid"
+.Fc
+.Ft "token_t *"
+.Fo au_to_process32_ex
+.Fa "au_id_t auid" "uid_t euid" "gid_t egid" "uid_t ruid"
+.Fa "gid_t rgid" "pid_t pid" "au_asid_t sid" "au_tid_addr_t *tid"
+.Fc
+.Ft "token_t *"
+.Fo au_to_process64_ex
+.Fa "au_id_t auid" "uid_t euid" "gid_t egid" "uid_t ruid"
+.Fa "gid_t rgid" "pid_t pid" "au_asid_t sid" "au_tid_addr_t *tid"
+.Fc
+.Ft "token_t *"
+.Fn au_to_return32 "char status" "u_int32_t ret"
+.Ft "token_t *"
+.Fn au_to_return64 "char status" "u_int64_t ret"
+.Ft "token_t *"
+.Fn au_to_return "char status" "u_int32_t ret"
+.Ft "token_t *"
+.Fn au_to_seq "long audit_count"
+.Ft "token_t *"
+.Fn au_to_sock_inet32 "struct sockaddr_in *so"
+.Ft "token_t *"
+.Fn au_to_sock_inet128 "struct sockaddr_in6 *so"
+.Ft "token_t *"
+.Fn au_to_sock_int "struct sockaddr_in *so"
+.Ft "token_t *"
+.Fn au_to_socket_ex "u_short so_domain" "u_short so_type" "struct sockaddr *sa_local" "struct sockaddr *sa_remote"
+.Ft "token_t *"
+.Fo au_to_subject32
+.Fa "au_id_t auid" "uid_t euid" "gid_t egid" "uid_t ruid"
+.Fa "gid_t rgid" "pid_t pid" "au_asid_t sid" "au_tid_t *tid"
+.Fc
+.Ft "token_t *"
+.Fo au_to_subject64
+.Fa "au_id_t auid" "uid_t euid" "gid_t egid" "uid_t ruid"
+.Fa "gid_t rgid" "pid_t pid" "au_asid_t sid" "au_tid_t *tid"
+.Fc
+.Ft "token_t *"
+.Fo au_to_subject
+.Fa "au_id_t auid" "uid_t euid" "gid_t egid" "uid_t ruid"
+.Fa "gid_t rgid" "pid_t pid" "au_asid_t sid" "au_tid_t *tid"
+.Fc
+.Ft "token_t *"
+.Fo au_to_subject32_ex
+.Fa "au_id_t auid" "uid_t euid" "gid_t egid" "uid_t ruid"
+.Fa "gid_t rgid" "pid_t pid" "au_asid_t sid" "au_tid_addr_t *tid"
+.Fc
+.Ft "token_t *"
+.Fo au_to_subject64_ex
+.Fa "au_id_t auid" "uid_t euid" "gid_t egid" "uid_t ruid"
+.Fa "gid_t rgid" "pid_t pid" "au_asid_t sid" "au_tid_addr_t *tid"
+.Fc
+.Ft "token_t *"
+.Fo au_to_subject_ex
+.Fa "au_id_t auid" "uid_t euid" "gid_t egid" "uid_t ruid"
+.Fa "gid_t rgid" "pid_t pid" "au_asid_t sid" "au_tid_addr_t *tid"
+.Fc
+.Ft "token_t *"
+.Fn au_to_me void
+.Ft "token_t *"
+.Fn au_to_exec_args "char **argv"
+.Ft "token_t *"
+.Fn au_to_exec_env "char **envp"
+.Ft "token_t *"
+.Fn au_to_header "int rec_size" "au_event_t e_type" "au_emod_t emod"
+.Ft "token_t *"
+.Fn au_to_header32 "int rec_size" "au_event_t e_type" "au_emod_t emod"
+.Ft "token_t *"
+.Fn au_to_header64 "int rec_size" "au_event_t e_type" "au_emod_t e_mod"
+.Ft "token_t *"
+.Fn au_to_header_ex "int rec_size" "au_event_t e_type" "au_emod_t e_mod"
+.Ft "token_t *"
+.Fn au_to_header32_ex "int rec_size" "au_event_t e_type" "au_emod_t e_mod"
+.Ft "token_t *"
+.Fn au_to_trailer "int rec_size"
+.Ft "token_t *"
+.Fn au_to_zonename "const char *zonename"
+.Sh DESCRIPTION
+These interfaces support the allocation of BSM audit tokens, represented by
+.Vt token_t ,
+for various data types.
+.Pp
+.Xr au_errno_to_bsm 3
+must be used to convert local
+.Xr errno 2
+errors to BSM error numbers before they are passed to
+.Fn au_to_return ,
+.Fn au_to_return32 ,
+and
+.Fn au_to_return64 .
+.Sh RETURN VALUES
+On success, a pointer to a
+.Vt token_t
+will be returned; the allocated
+.Vt token_t
+can be freed via a call to
+.Xr au_free_token 3 .
+On failure,
+.Dv NULL
+will be returned, and an error condition returned via
+.Va errno .
+.Sh SEE ALSO
+.Xr au_errno_to_bsm 3 ,
+.Xr libbsm 3
+.Sh HISTORY
+The OpenBSM implementation was created by McAfee Research, the security
+division of McAfee Inc., under contract to Apple Computer, Inc., in 2004.
+It was subsequently adopted by the TrustedBSD Project as the foundation for
+the OpenBSM distribution.
+.Sh AUTHORS
+.An -nosplit
+This software was created by
+.An Robert Watson ,
+.An Wayne Salamon ,
+and
+.An Suresh Krishnaswamy
+for McAfee Research, the security research division of McAfee,
+Inc., under contract to Apple Computer, Inc.
+.Pp
+The Basic Security Module (BSM) interface to audit records and audit event
+stream format were defined by Sun Microsystems.
Deleted: vendor/openbsm/1.2_alpha4/libbsm/au_user.3
===================================================================
--- vendor/openbsm/dist/libbsm/au_user.3 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/libbsm/au_user.3 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,156 +0,0 @@
-.\"-
-.\" Copyright (c) 2005-2006 Robert N. M. Watson
-.\" All rights reserved.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\" notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\" notice, this list of conditions and the following disclaimer in the
-.\" documentation and/or other materials provided with the distribution.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
-.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-.\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
-.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-.\" SUCH DAMAGE.
-.\"
-.\" $P4: //depot/projects/trustedbsd/openbsm/libbsm/au_user.3#10 $
-.\"
-.Dd April 19, 2005
-.Dt AU_USER 3
-.Os
-.Sh NAME
-.Nm setauuser ,
-.Nm endauuser ,
-.Nm getauuserent ,
-.Nm getauuserent_r ,
-.Nm getauusernam ,
-.Nm getauusernam_r ,
-.Nm au_user_mask ,
-.Nm getfauditflags
-.Nd "look up information from the audit_user database"
-.Sh LIBRARY
-.Lb libbsm
-.Sh SYNOPSIS
-.In bsm/libbsm.h
-.Ft void
-.Fn setauuser void
-.Ft void
-.Fn endauuser void
-.Ft "struct au_user_ent *"
-.Fn getauuserent void
-.Ft "struct au_user_ent *"
-.Fn getauuserent_r "struct au_user_ent *u"
-.Ft "struct au_user_ent *"
-.Fn getauusernam "const char *name"
-.Ft "struct au_user_ent *"
-.Fn getauusernam_r "struct au_user_ent *u" "const char *name"
-.Ft int
-.Fn au_user_mask "char *username" "au_mask_t *mask_p"
-.Ft int
-.Fo getfauditflags
-.Fa "au_mask_t *usremask" "au_mask_t *usrdmask" "au_mask_t *lastmask"
-.Fc
-.Sh DESCRIPTION
-These interfaces may be used to look up information from the
-.Xr audit_user 5
-database, which describes per-user audit configuration.
-Audit user entries are described by a
-.Vt au_user_ent ,
-which stores the user's name in
-.Va au_name ,
-events to always audit in
-.Va au_always ,
-and events never to audit
-.Va au_never .
-.Pp
-The
-.Fn getauuserent
-function
-returns the next user found in the
-.Xr audit_user 5
-database, or the first if the function has not yet been called.
-.Dv NULL
-will be returned if no further records are available.
-.Pp
-The
-.Fn getauusernam
-function
-looks up a user by name.
-.Dv NULL
-will be returned if no matching class can be found.
-.Pp
-The
-.Fn setauuser
-function
-resets the iterator through the
-.Xr audit_user 5
-database, causing the next call to
-.Fn getauuserent
-to start again from the beginning of the file.
-.Pp
-The
-.Fn endauuser
-function
-closes the
-.Xr audit_user 5
-database, if open.
-.Pp
-The
-.Fn au_user_mask
-function
-calculates a new session audit mask to be returned via
-.Fa mask_p
-for the user identified by
-.Fa username .
-If the user audit configuration is not found, the default system audit
-properties returned by
-.Xr getacflg 3
-are used.
-The resulting mask may be set via a call to
-.Xr setaudit 2
-or related variants.
-.Pp
-The
-.Fn getfauditflags
-function generates a new process audit state by combining the audit masks
-passed as parameters with the system audit masks.
-.Sh SEE ALSO
-.Xr setaudit 2 ,
-.Xr getacflg 3 ,
-.Xr libbsm 3 ,
-.Xr audit_user 5
-.Sh HISTORY
-The OpenBSM implementation was created by McAfee Research, the security
-division of McAfee Inc., under contract to Apple Computer, Inc., in 2004.
-It was subsequently adopted by the TrustedBSD Project as the foundation for
-the OpenBSM distribution.
-.Sh AUTHORS
-.An -nosplit
-This software was created by
-.An Robert Watson ,
-.An Wayne Salamon ,
-and
-.An Suresh Krishnaswamy
-for McAfee Research, the security research division of McAfee,
-Inc., under contract to Apple Computer, Inc.
-.Pp
-The Basic Security Module (BSM) interface to audit records and audit event
-stream format were defined by Sun Microsystems.
-.Sh BUGS
-These routines cannot currently distinguish between an entry not being found
-and an error accessing the database.
-The implementation should be changed to return an error via
-.Va errno
-when
-.Dv NULL
-is returned.
Copied: vendor/openbsm/1.2_alpha4/libbsm/au_user.3 (from rev 11163, vendor/openbsm/dist/libbsm/au_user.3)
===================================================================
--- vendor/openbsm/1.2_alpha4/libbsm/au_user.3 (rev 0)
+++ vendor/openbsm/1.2_alpha4/libbsm/au_user.3 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,154 @@
+.\"-
+.\" Copyright (c) 2005-2006 Robert N. M. Watson
+.\" All rights reserved.
+.\"
+.\" Redistribution and use in source and binary forms, with or without
+.\" modification, are permitted provided that the following conditions
+.\" are met:
+.\" 1. Redistributions of source code must retain the above copyright
+.\" notice, this list of conditions and the following disclaimer.
+.\" 2. Redistributions in binary form must reproduce the above copyright
+.\" notice, this list of conditions and the following disclaimer in the
+.\" documentation and/or other materials provided with the distribution.
+.\"
+.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+.\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+.\" SUCH DAMAGE.
+.\"
+.Dd April 19, 2005
+.Dt AU_USER 3
+.Os
+.Sh NAME
+.Nm setauuser ,
+.Nm endauuser ,
+.Nm getauuserent ,
+.Nm getauuserent_r ,
+.Nm getauusernam ,
+.Nm getauusernam_r ,
+.Nm au_user_mask ,
+.Nm getfauditflags
+.Nd "look up information from the audit_user database"
+.Sh LIBRARY
+.Lb libbsm
+.Sh SYNOPSIS
+.In bsm/libbsm.h
+.Ft void
+.Fn setauuser void
+.Ft void
+.Fn endauuser void
+.Ft "struct au_user_ent *"
+.Fn getauuserent void
+.Ft "struct au_user_ent *"
+.Fn getauuserent_r "struct au_user_ent *u"
+.Ft "struct au_user_ent *"
+.Fn getauusernam "const char *name"
+.Ft "struct au_user_ent *"
+.Fn getauusernam_r "struct au_user_ent *u" "const char *name"
+.Ft int
+.Fn au_user_mask "char *username" "au_mask_t *mask_p"
+.Ft int
+.Fo getfauditflags
+.Fa "au_mask_t *usremask" "au_mask_t *usrdmask" "au_mask_t *lastmask"
+.Fc
+.Sh DESCRIPTION
+These interfaces may be used to look up information from the
+.Xr audit_user 5
+database, which describes per-user audit configuration.
+Audit user entries are described by a
+.Vt au_user_ent ,
+which stores the user's name in
+.Va au_name ,
+events to always audit in
+.Va au_always ,
+and events never to audit
+.Va au_never .
+.Pp
+The
+.Fn getauuserent
+function
+returns the next user found in the
+.Xr audit_user 5
+database, or the first if the function has not yet been called.
+.Dv NULL
+will be returned if no further records are available.
+.Pp
+The
+.Fn getauusernam
+function
+looks up a user by name.
+.Dv NULL
+will be returned if no matching class can be found.
+.Pp
+The
+.Fn setauuser
+function
+resets the iterator through the
+.Xr audit_user 5
+database, causing the next call to
+.Fn getauuserent
+to start again from the beginning of the file.
+.Pp
+The
+.Fn endauuser
+function
+closes the
+.Xr audit_user 5
+database, if open.
+.Pp
+The
+.Fn au_user_mask
+function
+calculates a new session audit mask to be returned via
+.Fa mask_p
+for the user identified by
+.Fa username .
+If the user audit configuration is not found, the default system audit
+properties returned by
+.Xr getacflg 3
+are used.
+The resulting mask may be set via a call to
+.Xr setaudit 2
+or related variants.
+.Pp
+The
+.Fn getfauditflags
+function generates a new process audit state by combining the audit masks
+passed as parameters with the system audit masks.
+.Sh SEE ALSO
+.Xr setaudit 2 ,
+.Xr getacflg 3 ,
+.Xr libbsm 3 ,
+.Xr audit_user 5
+.Sh HISTORY
+The OpenBSM implementation was created by McAfee Research, the security
+division of McAfee Inc., under contract to Apple Computer, Inc., in 2004.
+It was subsequently adopted by the TrustedBSD Project as the foundation for
+the OpenBSM distribution.
+.Sh AUTHORS
+.An -nosplit
+This software was created by
+.An Robert Watson ,
+.An Wayne Salamon ,
+and
+.An Suresh Krishnaswamy
+for McAfee Research, the security research division of McAfee,
+Inc., under contract to Apple Computer, Inc.
+.Pp
+The Basic Security Module (BSM) interface to audit records and audit event
+stream format were defined by Sun Microsystems.
+.Sh BUGS
+These routines cannot currently distinguish between an entry not being found
+and an error accessing the database.
+The implementation should be changed to return an error via
+.Va errno
+when
+.Dv NULL
+is returned.
Deleted: vendor/openbsm/1.2_alpha4/libbsm/audit_submit.3
===================================================================
--- vendor/openbsm/dist/libbsm/audit_submit.3 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/libbsm/audit_submit.3 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,132 +0,0 @@
-.\"
-.\" Copyright (c) 2006 Christian S.J. Peron
-.\" All rights reserved.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\"
-.\" 1. Redistributions of source code must retain the above copyright
-.\" notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\" notice, this list of conditions and the following disclaimer in the
-.\" documentation and/or other materials provided with the distribution.
-.\" 3. Neither the name of Apple Computer, Inc. ("Apple") nor the names of
-.\" its contributors may be used to endorse or promote products derived
-.\" from this software without specific prior written permission.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND
-.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-.\" ARE DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR
-.\" ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-.\" STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
-.\" IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-.\" POSSIBILITY OF SUCH DAMAGE.
-.\"
-.\" $P4: //depot/projects/trustedbsd/openbsm/libbsm/audit_submit.3#12 $
-.\"
-.Dd May 29, 2006
-.Dt audit_submit 3
-.Os
-.Sh NAME
-.Nm audit_submit
-.Nd "general purpose audit record submission"
-.Sh LIBRARY
-.Lb libbsm
-.Sh SYNOPSIS
-.In bsm/libbsm.h
-.Ft int
-.Fo audit_submit
-.Fa "short au_event" "au_id_t auid" "char status"
-.Fa "int reterr" "const char * restrict format" ...
-.Fc
-.Sh DESCRIPTION
-The
-.Fn audit_submit
-function provides a generic programming interface for audit record submission.
-This audit record will contain a header, subject token, an optional text token,
-return token, and a trailer.
-The header will contain the event class specified by
-.Fa au_event .
-The subject token will be generated based on
-.Fa au_ctx .
-The return token is dependent on the
-.Fa status
-and
-.Fa reterr
-arguments.
-Optionally, a text token will be created as a part of this record.
-.Pp
-Text token output is under the control of a
-.Fa format
-string that specifies how subsequent arguments (or arguments accessed via the
-variable-length argument facilities of
-.Xr stdarg 3 )
-are converted for output.
-If
-.Fa format
-is
-.Dv NULL ,
-then no text token is created in the audit record.
-.Pp
-It should be noted that
-.Fn audit_submit
-assumes that
-.Xr setaudit 2 ,
-or
-.Xr setaudit_addr 2
-has already been called.
-As a direct result, the terminal ID for the
-subject will be retrieved from the kernel via
-.Xr getaudit 2 ,
-or
-.Xr getaudit_addr 2 .
-.Sh EXAMPLES
-.Bd -literal -offset indent
-#include <bsm/audit.h>
-#include <bsm/libbsm.h>
-#include <bsm/audit_uevents.h>
-
-#include <stdio.h>
-#include <stdarg.h>
-#include <errno.h>
-
-int
-audit_bad_su(char *from_login, char *to_login)
-{
- int error;
-
- error = audit_submit(AUE_su, getuid(), 1, EPERM,
- "bad su from %s to %s", from_login, to_login);
- return (error);
-}
-.Ed
-.Pp
-Will generate the following audit record:
-.Bd -literal -offset indent
-header,94,1,su(1),0,Mon Apr 17 23:23:59 2006, + 271 msec
-subject,root,root,wheel,root,wheel,652,652,0,0.0.0.0
-text,bad su from from csjp to root
-return,failure : Operation not permitted,1
-trailer,94
-.Ed
-.Sh SEE ALSO
-.Xr auditon 2 ,
-.Xr getaudit 2 ,
-.Xr libbsm 3 ,
-.Xr stdarg 3
-.Sh HISTORY
-The
-.Fn audit_submit
-function first appeared in OpenBSM version 1.0.
-OpenBSM 1.0 was introduced in
-.Fx 7.0 .
-.Sh AUTHORS
-The
-.Fn audit_submit
-function was written by
-.An Christian S.J. Peron Aq csjp at FreeBSD.org .
Copied: vendor/openbsm/1.2_alpha4/libbsm/audit_submit.3 (from rev 11163, vendor/openbsm/dist/libbsm/audit_submit.3)
===================================================================
--- vendor/openbsm/1.2_alpha4/libbsm/audit_submit.3 (rev 0)
+++ vendor/openbsm/1.2_alpha4/libbsm/audit_submit.3 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,151 @@
+.\"
+.\" Copyright (c) 2006 Christian S.J. Peron
+.\" All rights reserved.
+.\"
+.\" Redistribution and use in source and binary forms, with or without
+.\" modification, are permitted provided that the following conditions
+.\" are met:
+.\"
+.\" 1. Redistributions of source code must retain the above copyright
+.\" notice, this list of conditions and the following disclaimer.
+.\" 2. Redistributions in binary form must reproduce the above copyright
+.\" notice, this list of conditions and the following disclaimer in the
+.\" documentation and/or other materials provided with the distribution.
+.\"
+.\" THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND
+.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+.\" ARE DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR
+.\" ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+.\" STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+.\" IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+.\" POSSIBILITY OF SUCH DAMAGE.
+.\"
+.Dd January 18, 2008
+.Dt AUDIT_SUBMIT 3
+.Os
+.Sh NAME
+.Nm audit_submit
+.Nd "general purpose audit record submission"
+.Sh LIBRARY
+.Lb libbsm
+.Sh SYNOPSIS
+.In bsm/libbsm.h
+.Ft int
+.Fo audit_submit
+.Fa "short au_event" "au_id_t auid" "char status"
+.Fa "int reterr" "const char * restrict format" ...
+.Fc
+.Sh DESCRIPTION
+The
+.Fn audit_submit
+function provides a generic programming interface for audit record submission.
+This audit record will contain a header, subject token, an optional text token,
+return token, and a trailer.
+The header will contain the event class specified by
+.Fa au_event .
+The subject token will be generated based on
+.Fa auid .
+The return token is dependent on the
+.Fa status
+and
+.Fa reterr
+arguments; unlike the argument to
+.Xr au_to_return ,
+.Fa reterr
+should be a local rather than BSM error number.
+Optionally, a text token will be created as a part of this record.
+.Pp
+Text token output is under the control of a
+.Fa format
+string that specifies how subsequent arguments (or arguments accessed via the
+variable-length argument facilities of
+.Xr stdarg 3 )
+are converted for output.
+If
+.Fa format
+is
+.Dv NULL ,
+then no text token is created in the audit record.
+.Pp
+It should be noted that
+.Fn audit_submit
+assumes that
+.Xr setaudit 2 ,
+or
+.Xr setaudit_addr 2
+has already been called.
+As a direct result, the terminal ID for the
+subject will be retrieved from the kernel via
+.Xr getaudit 2 ,
+or
+.Xr getaudit_addr 2 .
+.Sh RETURN VALUES
+If successful,
+.Nm
+will return zero.
+Otherwise a -1 is returned and the global variable
+.Va errno
+is set to indicate the error.
+.Sh EXAMPLES
+.Bd -literal -offset indent
+#include <bsm/audit.h>
+#include <bsm/libbsm.h>
+#include <bsm/audit_uevents.h>
+
+#include <stdio.h>
+#include <stdarg.h>
+#include <errno.h>
+
+void
+audit_bad_su(char *from_login, char *to_login)
+{
+ struct auditinfo_addr aia;
+ struct auditinfo ai;
+ au_id_t aid;
+ int error;
+
+ error = getaudit_addr(&aia, sizeof(aia));
+ if (error < 0 && errno == ENOSYS) {
+ error = getaudit(&ai);
+ if (error < 0)
+ err(1, "getaudit");
+ aid = ai.ai_auid;
+ } else if (error < 0)
+ err(1, "getaudit_addr");
+ else
+ aid = aia.ai_auid;
+ error = audit_submit(AUE_su, aid, EPERM, 1,
+ "bad su from %s to %s", from_login, to_login);
+ if (error != 0)
+ err(1, "audit_submit");
+}
+.Ed
+.Pp
+Will generate the following audit record:
+.Bd -literal -offset indent
+header,94,1,su(1),0,Mon Apr 17 23:23:59 2006, + 271 msec
+subject,root,root,wheel,root,wheel,652,652,0,0.0.0.0
+text,bad su from from csjp to root
+return,failure : Operation not permitted,1
+trailer,94
+.Ed
+.Sh SEE ALSO
+.Xr auditon 2 ,
+.Xr getaudit 2 ,
+.Xr libbsm 3 ,
+.Xr stdarg 3
+.Sh HISTORY
+The
+.Fn audit_submit
+function first appeared in OpenBSM version 1.0.
+OpenBSM 1.0 was introduced in
+.Fx 7.0 .
+.Sh AUTHORS
+The
+.Fn audit_submit
+function was written by
+.An Christian S.J. Peron Aq csjp at FreeBSD.org .
Deleted: vendor/openbsm/1.2_alpha4/libbsm/bsm_audit.c
===================================================================
--- vendor/openbsm/dist/libbsm/bsm_audit.c 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/libbsm/bsm_audit.c 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,383 +0,0 @@
-/*
- * Copyright (c) 2004 Apple Computer, Inc.
- * Copyright (c) 2005 SPARTA, Inc.
- * All rights reserved.
- *
- * This code was developed in part by Robert N. M. Watson, Senior Principal
- * Scientist, SPARTA, Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. Neither the name of Apple Computer, Inc. ("Apple") nor the names of
- * its contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR
- * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
- * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- * $P4: //depot/projects/trustedbsd/openbsm/libbsm/bsm_audit.c#28 $
- */
-
-#include <sys/types.h>
-
-#include <config/config.h>
-#ifdef HAVE_FULL_QUEUE_H
-#include <sys/queue.h>
-#else
-#include <compat/queue.h>
-#endif
-
-#include <bsm/audit_internal.h>
-#include <bsm/libbsm.h>
-
-#include <errno.h>
-#include <pthread.h>
-#include <stdlib.h>
-#include <string.h>
-
-/* array of used descriptors */
-static au_record_t *open_desc_table[MAX_AUDIT_RECORDS];
-
-/* The current number of active record descriptors */
-static int audit_rec_count = 0;
-
-/*
- * Records that can be recycled are maintained in the list given below. The
- * maximum number of elements that can be present in this list is bounded by
- * MAX_AUDIT_RECORDS. Memory allocated for these records are never freed.
- */
-static LIST_HEAD(, au_record) audit_free_q;
-
-static pthread_mutex_t mutex = PTHREAD_MUTEX_INITIALIZER;
-
-/*
- * This call frees a token_t and its internal data.
- */
-void
-au_free_token(token_t *tok)
-{
-
- if (tok != NULL) {
- if (tok->t_data)
- free(tok->t_data);
- free(tok);
- }
-}
-
-/*
- * This call reserves memory for the audit record. Memory must be guaranteed
- * before any auditable event can be generated. The au_record_t structure
- * maintains a reference to the memory allocated above and also the list of
- * tokens associated with this record. Descriptors are recyled once the
- * records are added to the audit trail following au_close().
- */
-int
-au_open(void)
-{
- au_record_t *rec = NULL;
-
- pthread_mutex_lock(&mutex);
-
- if (audit_rec_count == 0)
- LIST_INIT(&audit_free_q);
-
- /*
- * Find an unused descriptor, remove it from the free list, mark as
- * used.
- */
- if (!LIST_EMPTY(&audit_free_q)) {
- rec = LIST_FIRST(&audit_free_q);
- rec->used = 1;
- LIST_REMOVE(rec, au_rec_q);
- }
-
- pthread_mutex_unlock(&mutex);
-
- if (rec == NULL) {
- /*
- * Create a new au_record_t if no descriptors are available.
- */
- rec = malloc (sizeof(au_record_t));
- if (rec == NULL)
- return (-1);
-
- rec->data = malloc (MAX_AUDIT_RECORD_SIZE * sizeof(u_char));
- if (rec->data == NULL) {
- free(rec);
- errno = ENOMEM;
- return (-1);
- }
-
- pthread_mutex_lock(&mutex);
-
- if (audit_rec_count == MAX_AUDIT_RECORDS) {
- pthread_mutex_unlock(&mutex);
- free(rec->data);
- free(rec);
-
- /* XXX We need to increase size of MAX_AUDIT_RECORDS */
- errno = ENOMEM;
- return (-1);
- }
- rec->desc = audit_rec_count;
- open_desc_table[audit_rec_count] = rec;
- audit_rec_count++;
-
- pthread_mutex_unlock(&mutex);
-
- }
-
- memset(rec->data, 0, MAX_AUDIT_RECORD_SIZE);
-
- TAILQ_INIT(&rec->token_q);
- rec->len = 0;
- rec->used = 1;
-
- return (rec->desc);
-}
-
-/*
- * Store the token with the record descriptor.
- *
- * Don't permit writing more to the buffer than would let the trailer be
- * appended later.
- */
-int
-au_write(int d, token_t *tok)
-{
- au_record_t *rec;
-
- if (tok == NULL) {
- errno = EINVAL;
- return (-1); /* Invalid Token */
- }
-
- /* Write the token to the record descriptor */
- rec = open_desc_table[d];
- if ((rec == NULL) || (rec->used == 0)) {
- errno = EINVAL;
- return (-1); /* Invalid descriptor */
- }
-
- if (rec->len + tok->len + AUDIT_TRAILER_SIZE > MAX_AUDIT_RECORD_SIZE) {
- errno = ENOMEM;
- return (-1);
- }
-
- /* Add the token to the tail */
- /*
- * XXX Not locking here -- we should not be writing to
- * XXX the same descriptor from different threads
- */
- TAILQ_INSERT_TAIL(&rec->token_q, tok, tokens);
-
- rec->len += tok->len; /* grow record length by token size bytes */
-
- /* Token should not be available after this call */
- tok = NULL;
- return (0); /* Success */
-}
-
-/*
- * Assemble an audit record out of its tokens, including allocating header and
- * trailer tokens. Does not free the token chain, which must be done by the
- * caller if desirable.
- *
- * XXX: Assumes there is sufficient space for the header and trailer.
- */
-static int
-au_assemble(au_record_t *rec, short event)
-{
- token_t *header, *tok, *trailer;
- size_t tot_rec_size;
- u_char *dptr;
- int error;
-
- tot_rec_size = rec->len + AUDIT_HEADER_SIZE + AUDIT_TRAILER_SIZE;
- header = au_to_header32(tot_rec_size, event, 0);
- if (header == NULL)
- return (-1);
-
- trailer = au_to_trailer(tot_rec_size);
- if (trailer == NULL) {
- error = errno;
- au_free_token(header);
- errno = error;
- return (-1);
- }
-
- TAILQ_INSERT_HEAD(&rec->token_q, header, tokens);
- TAILQ_INSERT_TAIL(&rec->token_q, trailer, tokens);
-
- rec->len = tot_rec_size;
- dptr = rec->data;
-
- TAILQ_FOREACH(tok, &rec->token_q, tokens) {
- memcpy(dptr, tok->t_data, tok->len);
- dptr += tok->len;
- }
-
- return (0);
-}
-
-/*
- * Given a record that is no longer of interest, tear it down and convert to a
- * free record.
- */
-static void
-au_teardown(au_record_t *rec)
-{
- token_t *tok;
-
- /* Free the token list */
- while ((tok = TAILQ_FIRST(&rec->token_q)) != NULL) {
- TAILQ_REMOVE(&rec->token_q, tok, tokens);
- free(tok->t_data);
- free(tok);
- }
-
- rec->used = 0;
- rec->len = 0;
-
- pthread_mutex_lock(&mutex);
-
- /* Add the record to the freelist tail */
- LIST_INSERT_HEAD(&audit_free_q, rec, au_rec_q);
-
- pthread_mutex_unlock(&mutex);
-}
-
-#ifdef HAVE_AUDIT_SYSCALLS
-/*
- * Add the header token, identify any missing tokens. Write out the tokens to
- * the record memory and finally, call audit.
- */
-int
-au_close(int d, int keep, short event)
-{
- au_record_t *rec;
- size_t tot_rec_size;
- int retval = 0;
-
- rec = open_desc_table[d];
- if ((rec == NULL) || (rec->used == 0)) {
- errno = EINVAL;
- return (-1); /* Invalid descriptor */
- }
-
- if (keep == AU_TO_NO_WRITE) {
- retval = 0;
- goto cleanup;
- }
-
- tot_rec_size = rec->len + AUDIT_HEADER_SIZE + AUDIT_TRAILER_SIZE;
-
- if (tot_rec_size > MAX_AUDIT_RECORD_SIZE) {
- /*
- * XXXRW: Since au_write() is supposed to prevent this, spew
- * an error here.
- */
- fprintf(stderr, "au_close failed");
- errno = ENOMEM;
- retval = -1;
- goto cleanup;
- }
-
- if (au_assemble(rec, event) < 0) {
- /*
- * XXXRW: This is also not supposed to happen, but might if we
- * are unable to allocate header and trailer memory.
- */
- retval = -1;
- goto cleanup;
- }
-
- /* Call the kernel interface to audit */
- retval = audit(rec->data, rec->len);
-
-cleanup:
- /* CLEANUP */
- au_teardown(rec);
- return (retval);
-}
-#endif /* HAVE_AUDIT_SYSCALLS */
-
-/*
- * au_close(), except onto an in-memory buffer. Buffer size as an argument,
- * record size returned via same argument on success.
- */
-int
-au_close_buffer(int d, short event, u_char *buffer, size_t *buflen)
-{
- size_t tot_rec_size;
- au_record_t *rec;
- int retval;
-
- rec = open_desc_table[d];
- if ((rec == NULL) || (rec->used == 0)) {
- errno = EINVAL;
- return (-1);
- }
-
- retval = 0;
- tot_rec_size = rec->len + AUDIT_HEADER_SIZE + AUDIT_TRAILER_SIZE;
- if ((tot_rec_size > MAX_AUDIT_RECORD_SIZE) ||
- (tot_rec_size > *buflen)) {
- /*
- * XXXRW: See au_close() comment.
- */
- fprintf(stderr, "au_close_buffer failed %zd", tot_rec_size);
- errno = ENOMEM;
- retval = -1;
- goto cleanup;
- }
-
- if (au_assemble(rec, event) < 0) {
- /* XXXRW: See au_close() comment. */
- retval = -1;
- goto cleanup;
- }
-
- memcpy(buffer, rec->data, rec->len);
- *buflen = rec->len;
-
-cleanup:
- au_teardown(rec);
- return (retval);
-}
-
-/*
- * au_close_token() returns the byte format of a token_t. This won't
- * generally be used by applications, but is quite useful for writing test
- * tools. Will free the token on either success or failure.
- */
-int
-au_close_token(token_t *tok, u_char *buffer, size_t *buflen)
-{
-
- if (tok->len > *buflen) {
- au_free_token(tok);
- errno = ENOMEM;
- return (EINVAL);
- }
-
- memcpy(buffer, tok->t_data, tok->len);
- *buflen = tok->len;
- au_free_token(tok);
- return (0);
-}
Copied: vendor/openbsm/1.2_alpha4/libbsm/bsm_audit.c (from rev 11163, vendor/openbsm/dist/libbsm/bsm_audit.c)
===================================================================
--- vendor/openbsm/1.2_alpha4/libbsm/bsm_audit.c (rev 0)
+++ vendor/openbsm/1.2_alpha4/libbsm/bsm_audit.c 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,449 @@
+/*-
+ * Copyright (c) 2004 Apple Inc.
+ * Copyright (c) 2005 SPARTA, Inc.
+ * All rights reserved.
+ *
+ * This code was developed in part by Robert N. M. Watson, Senior Principal
+ * Scientist, SPARTA, Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of Apple Inc. ("Apple") nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <sys/types.h>
+
+#include <config/config.h>
+#ifdef HAVE_FULL_QUEUE_H
+#include <sys/queue.h>
+#else
+#include <compat/queue.h>
+#endif
+
+#include <bsm/audit_internal.h>
+#include <bsm/libbsm.h>
+
+#include <netinet/in.h>
+
+#include <errno.h>
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+#include <pthread.h>
+#endif
+#include <stdlib.h>
+#include <string.h>
+
+/* array of used descriptors */
+static au_record_t *open_desc_table[MAX_AUDIT_RECORDS];
+
+/* The current number of active record descriptors */
+static int audit_rec_count = 0;
+
+/*
+ * Records that can be recycled are maintained in the list given below. The
+ * maximum number of elements that can be present in this list is bounded by
+ * MAX_AUDIT_RECORDS. Memory allocated for these records are never freed.
+ */
+static LIST_HEAD(, au_record) audit_free_q;
+
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+static pthread_mutex_t mutex = PTHREAD_MUTEX_INITIALIZER;
+#endif
+
+/*
+ * This call frees a token_t and its internal data.
+ */
+void
+au_free_token(token_t *tok)
+{
+
+ if (tok != NULL) {
+ if (tok->t_data)
+ free(tok->t_data);
+ free(tok);
+ }
+}
+
+/*
+ * This call reserves memory for the audit record. Memory must be guaranteed
+ * before any auditable event can be generated. The au_record_t structure
+ * maintains a reference to the memory allocated above and also the list of
+ * tokens associated with this record. Descriptors are recyled once the
+ * records are added to the audit trail following au_close().
+ */
+int
+au_open(void)
+{
+ au_record_t *rec = NULL;
+
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+ pthread_mutex_lock(&mutex);
+#endif
+
+ if (audit_rec_count == 0)
+ LIST_INIT(&audit_free_q);
+
+ /*
+ * Find an unused descriptor, remove it from the free list, mark as
+ * used.
+ */
+ if (!LIST_EMPTY(&audit_free_q)) {
+ rec = LIST_FIRST(&audit_free_q);
+ rec->used = 1;
+ LIST_REMOVE(rec, au_rec_q);
+ }
+
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+ pthread_mutex_unlock(&mutex);
+#endif
+
+ if (rec == NULL) {
+ /*
+ * Create a new au_record_t if no descriptors are available.
+ */
+ rec = malloc (sizeof(au_record_t));
+ if (rec == NULL)
+ return (-1);
+
+ rec->data = malloc (MAX_AUDIT_RECORD_SIZE * sizeof(u_char));
+ if (rec->data == NULL) {
+ free(rec);
+ errno = ENOMEM;
+ return (-1);
+ }
+
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+ pthread_mutex_lock(&mutex);
+#endif
+
+ if (audit_rec_count == MAX_AUDIT_RECORDS) {
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+ pthread_mutex_unlock(&mutex);
+#endif
+ free(rec->data);
+ free(rec);
+
+ /* XXX We need to increase size of MAX_AUDIT_RECORDS */
+ errno = ENOMEM;
+ return (-1);
+ }
+ rec->desc = audit_rec_count;
+ open_desc_table[audit_rec_count] = rec;
+ audit_rec_count++;
+
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+ pthread_mutex_unlock(&mutex);
+#endif
+
+ }
+
+ memset(rec->data, 0, MAX_AUDIT_RECORD_SIZE);
+
+ TAILQ_INIT(&rec->token_q);
+ rec->len = 0;
+ rec->used = 1;
+
+ return (rec->desc);
+}
+
+/*
+ * Store the token with the record descriptor.
+ *
+ * Don't permit writing more to the buffer than would let the trailer be
+ * appended later.
+ */
+int
+au_write(int d, token_t *tok)
+{
+ au_record_t *rec;
+
+ if (tok == NULL) {
+ errno = EINVAL;
+ return (-1); /* Invalid Token */
+ }
+
+ /* Write the token to the record descriptor */
+ rec = open_desc_table[d];
+ if ((rec == NULL) || (rec->used == 0)) {
+ errno = EINVAL;
+ return (-1); /* Invalid descriptor */
+ }
+
+ if (rec->len + tok->len + AUDIT_TRAILER_SIZE > MAX_AUDIT_RECORD_SIZE) {
+ errno = ENOMEM;
+ return (-1);
+ }
+
+ /* Add the token to the tail */
+ /*
+ * XXX Not locking here -- we should not be writing to
+ * XXX the same descriptor from different threads
+ */
+ TAILQ_INSERT_TAIL(&rec->token_q, tok, tokens);
+
+ rec->len += tok->len; /* grow record length by token size bytes */
+
+ /* Token should not be available after this call */
+ tok = NULL;
+ return (0); /* Success */
+}
+
+/*
+ * Assemble an audit record out of its tokens, including allocating header and
+ * trailer tokens. Does not free the token chain, which must be done by the
+ * caller if desirable.
+ *
+ * XXX: Assumes there is sufficient space for the header and trailer.
+ */
+static int
+au_assemble(au_record_t *rec, short event)
+{
+#ifdef HAVE_AUDIT_SYSCALLS
+ struct in6_addr *aptr;
+ struct auditinfo_addr aia;
+ struct timeval tm;
+ size_t hdrsize;
+#endif /* HAVE_AUDIT_SYSCALLS */
+ token_t *header, *tok, *trailer;
+ size_t tot_rec_size;
+ u_char *dptr;
+ int error;
+
+#ifdef HAVE_AUDIT_SYSCALLS
+ /*
+ * Grab the size of the address family stored in the kernel's audit
+ * state.
+ */
+ aia.ai_termid.at_type = AU_IPv4;
+ aia.ai_termid.at_addr[0] = INADDR_ANY;
+ if (audit_get_kaudit(&aia, sizeof(aia)) != 0) {
+ if (errno != ENOSYS && errno != EPERM)
+ return (-1);
+#endif /* HAVE_AUDIT_SYSCALLS */
+ tot_rec_size = rec->len + AUDIT_HEADER_SIZE +
+ AUDIT_TRAILER_SIZE;
+ header = au_to_header(tot_rec_size, event, 0);
+#ifdef HAVE_AUDIT_SYSCALLS
+ } else {
+ if (gettimeofday(&tm, NULL) < 0)
+ return (-1);
+ switch (aia.ai_termid.at_type) {
+ case AU_IPv4:
+ hdrsize = (aia.ai_termid.at_addr[0] == INADDR_ANY) ?
+ AUDIT_HEADER_SIZE : AUDIT_HEADER_EX_SIZE(&aia);
+ break;
+ case AU_IPv6:
+ aptr = (struct in6_addr *)&aia.ai_termid.at_addr[0];
+ hdrsize =
+ (IN6_IS_ADDR_UNSPECIFIED(aptr)) ?
+ AUDIT_HEADER_SIZE : AUDIT_HEADER_EX_SIZE(&aia);
+ break;
+ default:
+ return (-1);
+ }
+ tot_rec_size = rec->len + hdrsize + AUDIT_TRAILER_SIZE;
+ /*
+ * A header size greater then AUDIT_HEADER_SIZE means
+ * that we are using an extended header.
+ */
+ if (hdrsize > AUDIT_HEADER_SIZE)
+ header = au_to_header32_ex_tm(tot_rec_size, event,
+ 0, tm, &aia);
+ else
+ header = au_to_header(tot_rec_size, event, 0);
+ }
+#endif /* HAVE_AUDIT_SYSCALLS */
+ if (header == NULL)
+ return (-1);
+
+ trailer = au_to_trailer(tot_rec_size);
+ if (trailer == NULL) {
+ error = errno;
+ au_free_token(header);
+ errno = error;
+ return (-1);
+ }
+
+ TAILQ_INSERT_HEAD(&rec->token_q, header, tokens);
+ TAILQ_INSERT_TAIL(&rec->token_q, trailer, tokens);
+
+ rec->len = tot_rec_size;
+ dptr = rec->data;
+
+ TAILQ_FOREACH(tok, &rec->token_q, tokens) {
+ memcpy(dptr, tok->t_data, tok->len);
+ dptr += tok->len;
+ }
+
+ return (0);
+}
+
+/*
+ * Given a record that is no longer of interest, tear it down and convert to a
+ * free record.
+ */
+static void
+au_teardown(au_record_t *rec)
+{
+ token_t *tok;
+
+ /* Free the token list */
+ while ((tok = TAILQ_FIRST(&rec->token_q)) != NULL) {
+ TAILQ_REMOVE(&rec->token_q, tok, tokens);
+ free(tok->t_data);
+ free(tok);
+ }
+
+ rec->used = 0;
+ rec->len = 0;
+
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+ pthread_mutex_lock(&mutex);
+#endif
+
+ /* Add the record to the freelist tail */
+ LIST_INSERT_HEAD(&audit_free_q, rec, au_rec_q);
+
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+ pthread_mutex_unlock(&mutex);
+#endif
+}
+
+#ifdef HAVE_AUDIT_SYSCALLS
+/*
+ * Add the header token, identify any missing tokens. Write out the tokens to
+ * the record memory and finally, call audit.
+ */
+int
+au_close(int d, int keep, short event)
+{
+ au_record_t *rec;
+ size_t tot_rec_size;
+ int retval = 0;
+
+ rec = open_desc_table[d];
+ if ((rec == NULL) || (rec->used == 0)) {
+ errno = EINVAL;
+ return (-1); /* Invalid descriptor */
+ }
+
+ if (keep == AU_TO_NO_WRITE) {
+ retval = 0;
+ goto cleanup;
+ }
+
+ tot_rec_size = rec->len + MAX_AUDIT_HEADER_SIZE + AUDIT_TRAILER_SIZE;
+
+ if (tot_rec_size > MAX_AUDIT_RECORD_SIZE) {
+ /*
+ * XXXRW: Since au_write() is supposed to prevent this, spew
+ * an error here.
+ */
+ fprintf(stderr, "au_close failed");
+ errno = ENOMEM;
+ retval = -1;
+ goto cleanup;
+ }
+
+ if (au_assemble(rec, event) < 0) {
+ /*
+ * XXXRW: This is also not supposed to happen, but might if we
+ * are unable to allocate header and trailer memory.
+ */
+ retval = -1;
+ goto cleanup;
+ }
+
+ /* Call the kernel interface to audit */
+ retval = audit(rec->data, rec->len);
+
+cleanup:
+ /* CLEANUP */
+ au_teardown(rec);
+ return (retval);
+}
+#endif /* HAVE_AUDIT_SYSCALLS */
+
+/*
+ * au_close(), except onto an in-memory buffer. Buffer size as an argument,
+ * record size returned via same argument on success.
+ */
+int
+au_close_buffer(int d, short event, u_char *buffer, size_t *buflen)
+{
+ size_t tot_rec_size;
+ au_record_t *rec;
+ int retval;
+
+ rec = open_desc_table[d];
+ if ((rec == NULL) || (rec->used == 0)) {
+ errno = EINVAL;
+ return (-1);
+ }
+
+ retval = 0;
+ tot_rec_size = rec->len + MAX_AUDIT_HEADER_SIZE + AUDIT_TRAILER_SIZE;
+ if ((tot_rec_size > MAX_AUDIT_RECORD_SIZE) ||
+ (tot_rec_size > *buflen)) {
+ /*
+ * XXXRW: See au_close() comment.
+ */
+ fprintf(stderr, "au_close_buffer failed %zd", tot_rec_size);
+ errno = ENOMEM;
+ retval = -1;
+ goto cleanup;
+ }
+
+ if (au_assemble(rec, event) < 0) {
+ /* XXXRW: See au_close() comment. */
+ retval = -1;
+ goto cleanup;
+ }
+
+ memcpy(buffer, rec->data, rec->len);
+ *buflen = rec->len;
+
+cleanup:
+ au_teardown(rec);
+ return (retval);
+}
+
+/*
+ * au_close_token() returns the byte format of a token_t. This won't
+ * generally be used by applications, but is quite useful for writing test
+ * tools. Will free the token on either success or failure.
+ */
+int
+au_close_token(token_t *tok, u_char *buffer, size_t *buflen)
+{
+
+ if (tok->len > *buflen) {
+ au_free_token(tok);
+ errno = ENOMEM;
+ return (EINVAL);
+ }
+
+ memcpy(buffer, tok->t_data, tok->len);
+ *buflen = tok->len;
+ au_free_token(tok);
+ return (0);
+}
Deleted: vendor/openbsm/1.2_alpha4/libbsm/bsm_class.c
===================================================================
--- vendor/openbsm/dist/libbsm/bsm_class.c 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/libbsm/bsm_class.c 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,267 +0,0 @@
-/*
- * Copyright (c) 2004 Apple Computer, Inc.
- * Copyright (c) 2006 Robert N. M. Watson
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. Neither the name of Apple Computer, Inc. ("Apple") nor the names of
- * its contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR
- * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
- * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- * $P4: //depot/projects/trustedbsd/openbsm/libbsm/bsm_class.c#11 $
- */
-
-#include <bsm/libbsm.h>
-
-#include <string.h>
-#include <pthread.h>
-#include <stdio.h>
-#include <stdlib.h>
-
-/*
- * Parse the contents of the audit_class file to return struct au_class_ent
- * entries.
- */
-static FILE *fp = NULL;
-static char linestr[AU_LINE_MAX];
-static const char *classdelim = ":";
-
-static pthread_mutex_t mutex = PTHREAD_MUTEX_INITIALIZER;
-
-/*
- * Parse a single line from the audit_class file passed in str to the struct
- * au_class_ent elements; store the result in c.
- */
-static struct au_class_ent *
-classfromstr(char *str, struct au_class_ent *c)
-{
- char *classname, *classdesc, *classflag;
- char *last;
-
- /* Each line contains flag:name:desc. */
- classflag = strtok_r(str, classdelim, &last);
- classname = strtok_r(NULL, classdelim, &last);
- classdesc = strtok_r(NULL, classdelim, &last);
-
- if ((classflag == NULL) || (classname == NULL) || (classdesc == NULL))
- return (NULL);
-
- /*
- * Check for very large classnames.
- */
- if (strlen(classname) >= AU_CLASS_NAME_MAX)
- return (NULL);
-
- strcpy(c->ac_name, classname);
-
- /*
- * Check for very large class description.
- */
- if (strlen(classdesc) >= AU_CLASS_DESC_MAX)
- return (NULL);
- strcpy(c->ac_desc, classdesc);
- c->ac_class = strtoul(classflag, (char **) NULL, 0);
-
- return (c);
-}
-
-/*
- * Return the next au_class_ent structure from the file setauclass should be
- * called before invoking this function for the first time.
- *
- * Must be called with mutex held.
- */
-static struct au_class_ent *
-getauclassent_r_locked(struct au_class_ent *c)
-{
- char *tokptr, *nl;
-
- if ((fp == NULL) && ((fp = fopen(AUDIT_CLASS_FILE, "r")) == NULL))
- return (NULL);
-
- /*
- * Read until next non-comment line is found, or EOF.
- */
- while (1) {
- if (fgets(linestr, AU_LINE_MAX, fp) == NULL)
- return (NULL);
-
- /* Skip comments. */
- if (linestr[0] == '#')
- continue;
-
- /* Remove trailing new line character. */
- if ((nl = strrchr(linestr, '\n')) != NULL)
- *nl = '\0';
-
- /* Parse tokptr to au_class_ent components. */
- tokptr = linestr;
- if (classfromstr(tokptr, c) == NULL)
- return (NULL);
- break;
- }
-
- return (c);
-}
-
-struct au_class_ent *
-getauclassent_r(struct au_class_ent *c)
-{
- struct au_class_ent *cp;
-
- pthread_mutex_lock(&mutex);
- cp = getauclassent_r_locked(c);
- pthread_mutex_unlock(&mutex);
- return (cp);
-}
-
-struct au_class_ent *
-getauclassent(void)
-{
- static char class_ent_name[AU_CLASS_NAME_MAX];
- static char class_ent_desc[AU_CLASS_DESC_MAX];
- static struct au_class_ent c, *cp;
-
- bzero(&c, sizeof(c));
- bzero(class_ent_name, sizeof(class_ent_name));
- bzero(class_ent_desc, sizeof(class_ent_desc));
- c.ac_name = class_ent_name;
- c.ac_desc = class_ent_desc;
-
- pthread_mutex_lock(&mutex);
- cp = getauclassent_r_locked(&c);
- pthread_mutex_unlock(&mutex);
- return (cp);
-}
-
-/*
- * Rewind to the beginning of the enumeration.
- *
- * Must be called with mutex held.
- */
-static void
-setauclass_locked(void)
-{
-
- if (fp != NULL)
- fseek(fp, 0, SEEK_SET);
-}
-
-void
-setauclass(void)
-{
-
- pthread_mutex_lock(&mutex);
- setauclass_locked();
- pthread_mutex_unlock(&mutex);
-}
-
-/*
- * Return the next au_class_entry having the given class name.
- */
-struct au_class_ent *
-getauclassnam_r(struct au_class_ent *c, const char *name)
-{
- struct au_class_ent *cp;
-
- if (name == NULL)
- return (NULL);
-
- pthread_mutex_lock(&mutex);
- setauclass_locked();
- while ((cp = getauclassent_r_locked(c)) != NULL) {
- if (strcmp(name, cp->ac_name) == 0) {
- pthread_mutex_unlock(&mutex);
- return (cp);
- }
- }
- pthread_mutex_unlock(&mutex);
- return (NULL);
-}
-
-struct au_class_ent *
-getauclassnam(const char *name)
-{
- static char class_ent_name[AU_CLASS_NAME_MAX];
- static char class_ent_desc[AU_CLASS_DESC_MAX];
- static struct au_class_ent c;
-
- bzero(&c, sizeof(c));
- bzero(class_ent_name, sizeof(class_ent_name));
- bzero(class_ent_desc, sizeof(class_ent_desc));
- c.ac_name = class_ent_name;
- c.ac_desc = class_ent_desc;
-
- return (getauclassnam_r(&c, name));
-}
-
-
-/*
- * Return the next au_class_entry having the given class number.
- *
- * OpenBSM extension.
- */
-struct au_class_ent *
-getauclassnum_r(struct au_class_ent *c, au_class_t class_number)
-{
- struct au_class_ent *cp;
-
- pthread_mutex_lock(&mutex);
- setauclass_locked();
- while ((cp = getauclassent_r_locked(c)) != NULL) {
- if (class_number == cp->ac_class)
- return (cp);
- }
- pthread_mutex_unlock(&mutex);
- return (NULL);
-}
-
-struct au_class_ent *
-getauclassnum(au_class_t class_number)
-{
- static char class_ent_name[AU_CLASS_NAME_MAX];
- static char class_ent_desc[AU_CLASS_DESC_MAX];
- static struct au_class_ent c;
-
- bzero(&c, sizeof(c));
- bzero(class_ent_name, sizeof(class_ent_name));
- bzero(class_ent_desc, sizeof(class_ent_desc));
- c.ac_name = class_ent_name;
- c.ac_desc = class_ent_desc;
-
- return (getauclassnum_r(&c, class_number));
-}
-
-/*
- * audit_class processing is complete; close any open files.
- */
-void
-endauclass(void)
-{
-
- pthread_mutex_lock(&mutex);
- if (fp != NULL) {
- fclose(fp);
- fp = NULL;
- }
- pthread_mutex_unlock(&mutex);
-}
Copied: vendor/openbsm/1.2_alpha4/libbsm/bsm_class.c (from rev 11163, vendor/openbsm/dist/libbsm/bsm_class.c)
===================================================================
--- vendor/openbsm/1.2_alpha4/libbsm/bsm_class.c (rev 0)
+++ vendor/openbsm/1.2_alpha4/libbsm/bsm_class.c 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,300 @@
+/*-
+ * Copyright (c) 2004 Apple Inc.
+ * Copyright (c) 2006 Robert N. M. Watson
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of Apple Inc. ("Apple") nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <config/config.h>
+
+#include <bsm/libbsm.h>
+
+#include <string.h>
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+#include <pthread.h>
+#endif
+#include <stdio.h>
+#include <stdlib.h>
+
+#ifndef HAVE_STRLCPY
+#include <compat/strlcpy.h>
+#endif
+
+/*
+ * Parse the contents of the audit_class file to return struct au_class_ent
+ * entries.
+ */
+static FILE *fp = NULL;
+static char linestr[AU_LINE_MAX];
+static const char *classdelim = ":";
+
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+static pthread_mutex_t mutex = PTHREAD_MUTEX_INITIALIZER;
+#endif
+
+/*
+ * Parse a single line from the audit_class file passed in str to the struct
+ * au_class_ent elements; store the result in c.
+ */
+static struct au_class_ent *
+classfromstr(char *str, struct au_class_ent *c)
+{
+ char *classname, *classdesc, *classflag;
+ char *last;
+
+ /* Each line contains flag:name:desc. */
+ classflag = strtok_r(str, classdelim, &last);
+ classname = strtok_r(NULL, classdelim, &last);
+ classdesc = strtok_r(NULL, classdelim, &last);
+
+ if ((classflag == NULL) || (classname == NULL) || (classdesc == NULL))
+ return (NULL);
+
+ /*
+ * Check for very large classnames.
+ */
+ if (strlen(classname) >= AU_CLASS_NAME_MAX)
+ return (NULL);
+ strlcpy(c->ac_name, classname, AU_CLASS_NAME_MAX);
+
+ /*
+ * Check for very large class description.
+ */
+ if (strlen(classdesc) >= AU_CLASS_DESC_MAX)
+ return (NULL);
+ strlcpy(c->ac_desc, classdesc, AU_CLASS_DESC_MAX);
+ c->ac_class = strtoul(classflag, (char **) NULL, 0);
+
+ return (c);
+}
+
+/*
+ * Return the next au_class_ent structure from the file setauclass should be
+ * called before invoking this function for the first time.
+ *
+ * Must be called with mutex held.
+ */
+static struct au_class_ent *
+getauclassent_r_locked(struct au_class_ent *c)
+{
+ char *tokptr, *nl;
+
+ if ((fp == NULL) && ((fp = fopen(AUDIT_CLASS_FILE, "r")) == NULL))
+ return (NULL);
+
+ /*
+ * Read until next non-comment line is found, or EOF.
+ */
+ while (1) {
+ if (fgets(linestr, AU_LINE_MAX, fp) == NULL)
+ return (NULL);
+
+ /* Skip comments. */
+ if (linestr[0] == '#')
+ continue;
+
+ /* Remove trailing new line character. */
+ if ((nl = strrchr(linestr, '\n')) != NULL)
+ *nl = '\0';
+
+ /* Parse tokptr to au_class_ent components. */
+ tokptr = linestr;
+ if (classfromstr(tokptr, c) == NULL)
+ return (NULL);
+ break;
+ }
+
+ return (c);
+}
+
+struct au_class_ent *
+getauclassent_r(struct au_class_ent *c)
+{
+ struct au_class_ent *cp;
+
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+ pthread_mutex_lock(&mutex);
+#endif
+ cp = getauclassent_r_locked(c);
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+ pthread_mutex_unlock(&mutex);
+#endif
+ return (cp);
+}
+
+struct au_class_ent *
+getauclassent(void)
+{
+ static char class_ent_name[AU_CLASS_NAME_MAX];
+ static char class_ent_desc[AU_CLASS_DESC_MAX];
+ static struct au_class_ent c, *cp;
+
+ bzero(&c, sizeof(c));
+ bzero(class_ent_name, sizeof(class_ent_name));
+ bzero(class_ent_desc, sizeof(class_ent_desc));
+ c.ac_name = class_ent_name;
+ c.ac_desc = class_ent_desc;
+
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+ pthread_mutex_lock(&mutex);
+#endif
+ cp = getauclassent_r_locked(&c);
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+ pthread_mutex_unlock(&mutex);
+#endif
+ return (cp);
+}
+
+/*
+ * Rewind to the beginning of the enumeration.
+ *
+ * Must be called with mutex held.
+ */
+static void
+setauclass_locked(void)
+{
+
+ if (fp != NULL)
+ fseek(fp, 0, SEEK_SET);
+}
+
+void
+setauclass(void)
+{
+
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+ pthread_mutex_lock(&mutex);
+#endif
+ setauclass_locked();
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+ pthread_mutex_unlock(&mutex);
+#endif
+}
+
+/*
+ * Return the next au_class_entry having the given class name.
+ */
+struct au_class_ent *
+getauclassnam_r(struct au_class_ent *c, const char *name)
+{
+ struct au_class_ent *cp;
+
+ if (name == NULL)
+ return (NULL);
+
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+ pthread_mutex_lock(&mutex);
+#endif
+ setauclass_locked();
+ while ((cp = getauclassent_r_locked(c)) != NULL) {
+ if (strcmp(name, cp->ac_name) == 0) {
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+ pthread_mutex_unlock(&mutex);
+#endif
+ return (cp);
+ }
+ }
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+ pthread_mutex_unlock(&mutex);
+#endif
+ return (NULL);
+}
+
+struct au_class_ent *
+getauclassnam(const char *name)
+{
+ static char class_ent_name[AU_CLASS_NAME_MAX];
+ static char class_ent_desc[AU_CLASS_DESC_MAX];
+ static struct au_class_ent c;
+
+ bzero(&c, sizeof(c));
+ bzero(class_ent_name, sizeof(class_ent_name));
+ bzero(class_ent_desc, sizeof(class_ent_desc));
+ c.ac_name = class_ent_name;
+ c.ac_desc = class_ent_desc;
+
+ return (getauclassnam_r(&c, name));
+}
+
+
+/*
+ * Return the next au_class_entry having the given class number.
+ *
+ * OpenBSM extension.
+ */
+struct au_class_ent *
+getauclassnum_r(struct au_class_ent *c, au_class_t class_number)
+{
+ struct au_class_ent *cp;
+
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+ pthread_mutex_lock(&mutex);
+#endif
+ setauclass_locked();
+ while ((cp = getauclassent_r_locked(c)) != NULL) {
+ if (class_number == cp->ac_class)
+ return (cp);
+ }
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+ pthread_mutex_unlock(&mutex);
+#endif
+ return (NULL);
+}
+
+struct au_class_ent *
+getauclassnum(au_class_t class_number)
+{
+ static char class_ent_name[AU_CLASS_NAME_MAX];
+ static char class_ent_desc[AU_CLASS_DESC_MAX];
+ static struct au_class_ent c;
+
+ bzero(&c, sizeof(c));
+ bzero(class_ent_name, sizeof(class_ent_name));
+ bzero(class_ent_desc, sizeof(class_ent_desc));
+ c.ac_name = class_ent_name;
+ c.ac_desc = class_ent_desc;
+
+ return (getauclassnum_r(&c, class_number));
+}
+
+/*
+ * audit_class processing is complete; close any open files.
+ */
+void
+endauclass(void)
+{
+
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+ pthread_mutex_lock(&mutex);
+#endif
+ if (fp != NULL) {
+ fclose(fp);
+ fp = NULL;
+ }
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+ pthread_mutex_unlock(&mutex);
+#endif
+}
Deleted: vendor/openbsm/1.2_alpha4/libbsm/bsm_control.c
===================================================================
--- vendor/openbsm/dist/libbsm/bsm_control.c 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/libbsm/bsm_control.c 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,516 +0,0 @@
-/*
- * Copyright (c) 2004 Apple Computer, Inc.
- * Copyright (c) 2006 Robert N. M. Watson
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. Neither the name of Apple Computer, Inc. ("Apple") nor the names of
- * its contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR
- * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
- * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- * $P4: //depot/projects/trustedbsd/openbsm/libbsm/bsm_control.c#16 $
- */
-
-#include <bsm/libbsm.h>
-
-#include <errno.h>
-#include <string.h>
-#include <pthread.h>
-#include <stdio.h>
-#include <stdlib.h>
-
-#include <config/config.h>
-#ifndef HAVE_STRLCAT
-#include <compat/strlcat.h>
-#endif
-
-/*
- * Parse the contents of the audit_control file to return the audit control
- * parameters. These static fields are protected by 'mutex'.
- */
-static FILE *fp = NULL;
-static char linestr[AU_LINE_MAX];
-static char *delim = ":";
-
-static char inacdir = 0;
-static char ptrmoved = 0;
-
-static pthread_mutex_t mutex = PTHREAD_MUTEX_INITIALIZER;
-
-/*
- * Returns the string value corresponding to the given label from the
- * configuration file.
- *
- * Must be called with mutex held.
- */
-static int
-getstrfromtype_locked(char *name, char **str)
-{
- char *type, *nl;
- char *tokptr;
- char *last;
-
- *str = NULL;
-
- if ((fp == NULL) && ((fp = fopen(AUDIT_CONTROL_FILE, "r")) == NULL))
- return (-1); /* Error */
-
- while (1) {
- if (fgets(linestr, AU_LINE_MAX, fp) == NULL) {
- if (ferror(fp))
- return (-1);
- return (0); /* EOF */
- }
-
- if (linestr[0] == '#')
- continue;
-
- /* Remove trailing new line character. */
- if ((nl = strrchr(linestr, '\n')) != NULL)
- *nl = '\0';
-
- tokptr = linestr;
- if ((type = strtok_r(tokptr, delim, &last)) != NULL) {
- if (strcmp(name, type) == 0) {
- /* Found matching name. */
- *str = strtok_r(NULL, delim, &last);
- if (*str == NULL) {
- errno = EINVAL;
- return (-1); /* Parse error in file */
- }
- return (0); /* Success */
- }
- }
- }
-}
-
-/*
- * Convert a policy to a string. Return -1 on failure, or >= 0 representing
- * the actual size of the string placed in the buffer (excluding terminating
- * nul).
- */
-ssize_t
-au_poltostr(long policy, size_t maxsize, char *buf)
-{
- int first;
-
- if (maxsize < 1)
- return (-1);
- first = 1;
- buf[0] = '\0';
-
- if (policy & AUDIT_CNT) {
- if (strlcat(buf, "cnt", maxsize) >= maxsize)
- return (-1);
- first = 0;
- }
- if (policy & AUDIT_AHLT) {
- if (!first) {
- if (strlcat(buf, ",", maxsize) >= maxsize)
- return (-1);
- }
- if (strlcat(buf, "ahlt", maxsize) >= maxsize)
- return (-1);
- first = 0;
- }
- if (policy & AUDIT_ARGV) {
- if (!first) {
- if (strlcat(buf, ",", maxsize) >= maxsize)
- return (-1);
- }
- if (strlcat(buf, "argv", maxsize) >= maxsize)
- return (-1);
- first = 0;
- }
- if (policy & AUDIT_ARGE) {
- if (!first) {
- if (strlcat(buf, ",", maxsize) >= maxsize)
- return (-1);
- }
- if (strlcat(buf, "arge", maxsize) >= maxsize)
- return (-1);
- first = 0;
- }
- if (policy & AUDIT_SEQ) {
- if (!first) {
- if (strlcat(buf, ",", maxsize) >= maxsize)
- return (-1);
- }
- if (strlcat(buf, "seq", maxsize) >= maxsize)
- return (-1);
- first = 0;
- }
- if (policy & AUDIT_WINDATA) {
- if (!first) {
- if (strlcat(buf, ",", maxsize) >= maxsize)
- return (-1);
- }
- if (strlcat(buf, "windata", maxsize) >= maxsize)
- return (-1);
- first = 0;
- }
- if (policy & AUDIT_USER) {
- if (!first) {
- if (strlcat(buf, ",", maxsize) >= maxsize)
- return (-1);
- }
- if (strlcat(buf, "user", maxsize) >= maxsize)
- return (-1);
- first = 0;
- }
- if (policy & AUDIT_GROUP) {
- if (!first) {
- if (strlcat(buf, ",", maxsize) >= maxsize)
- return (-1);
- }
- if (strlcat(buf, "group", maxsize) >= maxsize)
- return (-1);
- first = 0;
- }
- if (policy & AUDIT_TRAIL) {
- if (!first) {
- if (strlcat(buf, ",", maxsize) >= maxsize)
- return (-1);
- }
- if (strlcat(buf, "trail", maxsize) >= maxsize)
- return (-1);
- first = 0;
- }
- if (policy & AUDIT_PATH) {
- if (!first) {
- if (strlcat(buf, ",", maxsize) >= maxsize)
- return (-1);
- }
- if (strlcat(buf, "path", maxsize) >= maxsize)
- return (-1);
- first = 0;
- }
- if (policy & AUDIT_SCNT) {
- if (!first) {
- if (strlcat(buf, ",", maxsize) >= maxsize)
- return (-1);
- }
- if (strlcat(buf, "scnt", maxsize) >= maxsize)
- return (-1);
- first = 0;
- }
- if (policy & AUDIT_PUBLIC) {
- if (!first) {
- if (strlcat(buf, ",", maxsize) >= maxsize)
- return (-1);
- }
- if (strlcat(buf, "public", maxsize) >= maxsize)
- return (-1);
- first = 0;
- }
- if (policy & AUDIT_ZONENAME) {
- if (!first) {
- if (strlcat(buf, ",", maxsize) >= maxsize)
- return (-1);
- }
- if (strlcat(buf, "zonename", maxsize) >= maxsize)
- return (-1);
- first = 0;
- }
- if (policy & AUDIT_PERZONE) {
- if (!first) {
- if (strlcat(buf, ",", maxsize) >= maxsize)
- return (-1);
- }
- if (strlcat(buf, "perzone", maxsize) >= maxsize)
- return (-1);
- first = 0;
- }
- return (strlen(buf));
-}
-
-/*
- * Convert a string to a policy. Return -1 on failure (with errno EINVAL,
- * ENOMEM) or 0 on success.
- */
-int
-au_strtopol(const char *polstr, long *policy)
-{
- char *bufp, *string;
- char *buffer;
-
- *policy = 0;
- buffer = strdup(polstr);
- if (buffer == NULL)
- return (-1);
-
- bufp = buffer;
- while ((string = strsep(&bufp, ",")) != NULL) {
- if (strcmp(string, "cnt") == 0)
- *policy |= AUDIT_CNT;
- else if (strcmp(string, "ahlt") == 0)
- *policy |= AUDIT_AHLT;
- else if (strcmp(string, "argv") == 0)
- *policy |= AUDIT_ARGV;
- else if (strcmp(string, "arge") == 0)
- *policy |= AUDIT_ARGE;
- else if (strcmp(string, "seq") == 0)
- *policy |= AUDIT_SEQ;
- else if (strcmp(string, "winau_fstat") == 0)
- *policy |= AUDIT_WINDATA;
- else if (strcmp(string, "user") == 0)
- *policy |= AUDIT_USER;
- else if (strcmp(string, "group") == 0)
- *policy |= AUDIT_GROUP;
- else if (strcmp(string, "trail") == 0)
- *policy |= AUDIT_TRAIL;
- else if (strcmp(string, "path") == 0)
- *policy |= AUDIT_PATH;
- else if (strcmp(string, "scnt") == 0)
- *policy |= AUDIT_SCNT;
- else if (strcmp(string, "public") == 0)
- *policy |= AUDIT_PUBLIC;
- else if (strcmp(string, "zonename") == 0)
- *policy |= AUDIT_ZONENAME;
- else if (strcmp(string, "perzone") == 0)
- *policy |= AUDIT_PERZONE;
- else {
- free(buffer);
- errno = EINVAL;
- return (-1);
- }
- }
- free(buffer);
- return (0);
-}
-
-/*
- * Rewind the file pointer to beginning.
- */
-static void
-setac_locked(void)
-{
-
- ptrmoved = 1;
- if (fp != NULL)
- fseek(fp, 0, SEEK_SET);
-}
-
-void
-setac(void)
-{
-
- pthread_mutex_lock(&mutex);
- setac_locked();
- pthread_mutex_unlock(&mutex);
-}
-
-/*
- * Close the audit_control file.
- */
-void
-endac(void)
-{
-
- pthread_mutex_lock(&mutex);
- ptrmoved = 1;
- if (fp != NULL) {
- fclose(fp);
- fp = NULL;
- }
- pthread_mutex_unlock(&mutex);
-}
-
-/*
- * Return audit directory information from the audit control file.
- */
-int
-getacdir(char *name, int len)
-{
- char *dir;
- int ret = 0;
-
- /*
- * Check if another function was called between successive calls to
- * getacdir.
- */
- pthread_mutex_lock(&mutex);
- if (inacdir && ptrmoved) {
- ptrmoved = 0;
- if (fp != NULL)
- fseek(fp, 0, SEEK_SET);
- ret = 2;
- }
- if (getstrfromtype_locked(DIR_CONTROL_ENTRY, &dir) < 0) {
- pthread_mutex_unlock(&mutex);
- return (-2);
- }
- if (dir == NULL) {
- pthread_mutex_unlock(&mutex);
- return (-1);
- }
- if (strlen(dir) >= len) {
- pthread_mutex_unlock(&mutex);
- return (-3);
- }
- strcpy(name, dir);
- pthread_mutex_unlock(&mutex);
- return (ret);
-}
-
-/*
- * Return the minimum free diskspace value from the audit control file.
- */
-int
-getacmin(int *min_val)
-{
- char *min;
-
- pthread_mutex_lock(&mutex);
- setac_locked();
- if (getstrfromtype_locked(MINFREE_CONTROL_ENTRY, &min) < 0) {
- pthread_mutex_unlock(&mutex);
- return (-2);
- }
- if (min == NULL) {
- pthread_mutex_unlock(&mutex);
- return (1);
- }
- *min_val = atoi(min);
- pthread_mutex_unlock(&mutex);
- return (0);
-}
-
-/*
- * Return the desired trail rotation size from the audit control file.
- */
-int
-getacfilesz(size_t *filesz_val)
-{
- char *filesz, *dummy;
- long long ll;
-
- pthread_mutex_lock(&mutex);
- setac_locked();
- if (getstrfromtype_locked(FILESZ_CONTROL_ENTRY, &filesz) < 0) {
- pthread_mutex_unlock(&mutex);
- return (-2);
- }
- if (filesz == NULL) {
- pthread_mutex_unlock(&mutex);
- errno = EINVAL;
- return (1);
- }
- ll = strtoll(filesz, &dummy, 10);
- if (*dummy != '\0') {
- pthread_mutex_unlock(&mutex);
- errno = EINVAL;
- return (-1);
- }
- /*
- * The file size must either be 0 or >= MIN_AUDIT_FILE_SIZE. 0
- * indicates no rotation size.
- */
- if (ll < 0 || (ll > 0 && ll < MIN_AUDIT_FILE_SIZE)) {
- pthread_mutex_unlock(&mutex);
- errno = EINVAL;
- return (-1);
- }
- *filesz_val = ll;
- pthread_mutex_unlock(&mutex);
- return (0);
-}
-
-/*
- * Return the system audit value from the audit contol file.
- */
-int
-getacflg(char *auditstr, int len)
-{
- char *str;
-
- pthread_mutex_lock(&mutex);
- setac_locked();
- if (getstrfromtype_locked(FLAGS_CONTROL_ENTRY, &str) < 0) {
- pthread_mutex_unlock(&mutex);
- return (-2);
- }
- if (str == NULL) {
- pthread_mutex_unlock(&mutex);
- return (1);
- }
- if (strlen(str) >= len) {
- pthread_mutex_unlock(&mutex);
- return (-3);
- }
- strcpy(auditstr, str);
- pthread_mutex_unlock(&mutex);
- return (0);
-}
-
-/*
- * Return the non attributable flags from the audit contol file.
- */
-int
-getacna(char *auditstr, int len)
-{
- char *str;
-
- pthread_mutex_lock(&mutex);
- setac_locked();
- if (getstrfromtype_locked(NA_CONTROL_ENTRY, &str) < 0) {
- pthread_mutex_unlock(&mutex);
- return (-2);
- }
- if (str == NULL) {
- pthread_mutex_unlock(&mutex);
- return (1);
- }
- if (strlen(str) >= len) {
- pthread_mutex_unlock(&mutex);
- return (-3);
- }
- strcpy(auditstr, str);
- return (0);
-}
-
-/*
- * Return the policy field from the audit control file.
- */
-int
-getacpol(char *auditstr, size_t len)
-{
- char *str;
-
- pthread_mutex_lock(&mutex);
- setac_locked();
- if (getstrfromtype_locked(POLICY_CONTROL_ENTRY, &str) < 0) {
- pthread_mutex_unlock(&mutex);
- return (-2);
- }
- if (str == NULL) {
- pthread_mutex_unlock(&mutex);
- return (-1);
- }
- if (strlen(str) >= len) {
- pthread_mutex_unlock(&mutex);
- return (-3);
- }
- strcpy(auditstr, str);
- pthread_mutex_unlock(&mutex);
- return (0);
-}
Copied: vendor/openbsm/1.2_alpha4/libbsm/bsm_control.c (from rev 11163, vendor/openbsm/dist/libbsm/bsm_control.c)
===================================================================
--- vendor/openbsm/1.2_alpha4/libbsm/bsm_control.c (rev 0)
+++ vendor/openbsm/1.2_alpha4/libbsm/bsm_control.c 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,708 @@
+/*-
+ * Copyright (c) 2004, 2009 Apple Inc.
+ * Copyright (c) 2006 Robert N. M. Watson
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of Apple Inc. ("Apple") nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <config/config.h>
+
+#include <bsm/libbsm.h>
+
+#include <ctype.h>
+#include <errno.h>
+#include <string.h>
+#include <strings.h>
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+#include <pthread.h>
+#endif
+#include <stdio.h>
+#include <stdlib.h>
+
+#ifndef HAVE_STRLCAT
+#include <compat/strlcat.h>
+#endif
+#ifndef HAVE_STRLCPY
+#include <compat/strlcpy.h>
+#endif
+
+#include <sys/stat.h>
+
+/*
+ * Parse the contents of the audit_control file to return the audit control
+ * parameters. These static fields are protected by 'mutex'.
+ */
+static FILE *fp = NULL;
+static char linestr[AU_LINE_MAX];
+static char *delim = ":";
+
+static char inacdir = 0;
+static char ptrmoved = 0;
+
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+static pthread_mutex_t mutex = PTHREAD_MUTEX_INITIALIZER;
+#endif
+
+/*
+ * Audit policy string token table for au_poltostr() and au_strtopol().
+ */
+struct audit_polstr {
+ long ap_policy;
+ const char *ap_str;
+};
+
+static struct audit_polstr au_polstr[] = {
+ { AUDIT_CNT, "cnt" },
+ { AUDIT_AHLT, "ahlt" },
+ { AUDIT_ARGV, "argv" },
+ { AUDIT_ARGE, "arge" },
+ { AUDIT_SEQ, "seq" },
+ { AUDIT_WINDATA, "windata" },
+ { AUDIT_USER, "user" },
+ { AUDIT_GROUP, "group" },
+ { AUDIT_TRAIL, "trail" },
+ { AUDIT_PATH, "path" },
+ { AUDIT_SCNT, "scnt" },
+ { AUDIT_PUBLIC, "public" },
+ { AUDIT_ZONENAME, "zonename" },
+ { AUDIT_PERZONE, "perzone" },
+ { -1, NULL }
+};
+
+/*
+ * Returns the string value corresponding to the given label from the
+ * configuration file.
+ *
+ * Must be called with mutex held.
+ */
+static int
+getstrfromtype_locked(const char *name, char **str)
+{
+ char *type, *nl;
+ char *tokptr;
+ char *last;
+
+ *str = NULL;
+
+ if ((fp == NULL) && ((fp = fopen(AUDIT_CONTROL_FILE, "r")) == NULL))
+ return (-1); /* Error */
+
+ while (1) {
+ if (fgets(linestr, AU_LINE_MAX, fp) == NULL) {
+ if (ferror(fp))
+ return (-1);
+ return (0); /* EOF */
+ }
+
+ if (linestr[0] == '#')
+ continue;
+
+ /* Remove trailing new line character and white space. */
+ nl = strchr(linestr, '\0') - 1;
+ while (nl >= linestr && ('\n' == *nl || ' ' == *nl ||
+ '\t' == *nl)) {
+ *nl = '\0';
+ nl--;
+ }
+
+ tokptr = linestr;
+ if ((type = strtok_r(tokptr, delim, &last)) != NULL) {
+ if (strcmp(name, type) == 0) {
+ /* Found matching name. */
+ *str = strtok_r(NULL, delim, &last);
+ if (*str == NULL) {
+ errno = EINVAL;
+ return (-1); /* Parse error in file */
+ }
+ return (0); /* Success */
+ }
+ }
+ }
+}
+
+/*
+ * Convert a given time value with a multiplier (seconds, hours, days, years) to
+ * seconds. Return 0 on success.
+ */
+static int
+au_timetosec(time_t *seconds, u_long value, char mult)
+{
+ if (NULL == seconds)
+ return (-1);
+
+ switch(mult) {
+ case 's':
+ /* seconds */
+ *seconds = (time_t)value;
+ break;
+
+ case 'h':
+ /* hours */
+ *seconds = (time_t)value * 60 * 60;
+ break;
+
+ case 'd':
+ /* days */
+ *seconds = (time_t)value * 60 * 60 * 24;
+ break;
+
+ case 'y':
+ /* years. Add a day for each 4th (leap) year. */
+ *seconds = (time_t)value * 60 * 60 * 24 * 364 +
+ ((time_t)value / 4) * 60 * 60 * 24;
+ break;
+
+ default:
+ return (-1);
+ }
+ return (0);
+}
+
+/*
+ * Convert a given disk space value with a multiplier (bytes, kilobytes,
+ * megabytes, gigabytes) to bytes. Return 0 on success.
+ */
+static int
+au_spacetobytes(size_t *bytes, u_long value, char mult)
+{
+ if (NULL == bytes)
+ return (-1);
+
+ switch(mult) {
+ case 'B':
+ case ' ':
+ /* Bytes */
+ *bytes = (size_t)value;
+ break;
+
+ case 'K':
+ /* Kilobytes */
+ *bytes = (size_t)value * 1024;
+ break;
+
+ case 'M':
+ /* Megabytes */
+ *bytes = (size_t)value * 1024 * 1024;
+ break;
+
+ case 'G':
+ /* Gigabytes */
+ *bytes = (size_t)value * 1024 * 1024 * 1024;
+ break;
+
+ default:
+ return (-1);
+ }
+ return (0);
+}
+
+/*
+ * Convert a policy to a string. Return -1 on failure, or >= 0 representing
+ * the actual size of the string placed in the buffer (excluding terminating
+ * nul).
+ */
+ssize_t
+au_poltostr(int policy, size_t maxsize, char *buf)
+{
+ int first = 1;
+ int i = 0;
+
+ if (maxsize < 1)
+ return (-1);
+ buf[0] = '\0';
+
+ do {
+ if (policy & au_polstr[i].ap_policy) {
+ if (!first && strlcat(buf, ",", maxsize) >= maxsize)
+ return (-1);
+ if (strlcat(buf, au_polstr[i].ap_str, maxsize) >=
+ maxsize)
+ return (-1);
+ first = 0;
+ }
+ } while (NULL != au_polstr[++i].ap_str);
+
+ return (strlen(buf));
+}
+
+/*
+ * Convert a string to a policy. Return -1 on failure (with errno EINVAL,
+ * ENOMEM) or 0 on success.
+ */
+int
+au_strtopol(const char *polstr, int *policy)
+{
+ char *bufp, *string;
+ char *buffer;
+ int i, matched;
+
+ *policy = 0;
+ buffer = strdup(polstr);
+ if (buffer == NULL)
+ return (-1);
+
+ bufp = buffer;
+ while ((string = strsep(&bufp, ",")) != NULL) {
+ matched = i = 0;
+
+ do {
+ if (strcmp(string, au_polstr[i].ap_str) == 0) {
+ *policy |= au_polstr[i].ap_policy;
+ matched = 1;
+ break;
+ }
+ } while (NULL != au_polstr[++i].ap_str);
+
+ if (!matched) {
+ free(buffer);
+ errno = EINVAL;
+ return (-1);
+ }
+ }
+ free(buffer);
+ return (0);
+}
+
+/*
+ * Rewind the file pointer to beginning.
+ */
+static void
+setac_locked(void)
+{
+ static time_t lastctime = 0;
+ struct stat sbuf;
+
+ ptrmoved = 1;
+ if (fp != NULL) {
+ /*
+ * Check to see if the file on disk has changed. If so,
+ * force a re-read of the file by closing it.
+ */
+ if (fstat(fileno(fp), &sbuf) < 0)
+ goto closefp;
+ if (lastctime != sbuf.st_ctime) {
+ lastctime = sbuf.st_ctime;
+closefp:
+ fclose(fp);
+ fp = NULL;
+ return;
+ }
+
+ fseek(fp, 0, SEEK_SET);
+ }
+}
+
+void
+setac(void)
+{
+
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+ pthread_mutex_lock(&mutex);
+#endif
+ setac_locked();
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+ pthread_mutex_unlock(&mutex);
+#endif
+}
+
+/*
+ * Close the audit_control file.
+ */
+void
+endac(void)
+{
+
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+ pthread_mutex_lock(&mutex);
+#endif
+ ptrmoved = 1;
+ if (fp != NULL) {
+ fclose(fp);
+ fp = NULL;
+ }
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+ pthread_mutex_unlock(&mutex);
+#endif
+}
+
+/*
+ * Return audit directory information from the audit control file.
+ */
+int
+getacdir(char *name, int len)
+{
+ char *dir;
+ int ret = 0;
+
+ /*
+ * Check if another function was called between successive calls to
+ * getacdir.
+ */
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+ pthread_mutex_lock(&mutex);
+#endif
+ if (inacdir && ptrmoved) {
+ ptrmoved = 0;
+ if (fp != NULL)
+ fseek(fp, 0, SEEK_SET);
+ ret = 2;
+ }
+ if (getstrfromtype_locked(DIR_CONTROL_ENTRY, &dir) < 0) {
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+ pthread_mutex_unlock(&mutex);
+#endif
+ return (-2);
+ }
+ if (dir == NULL) {
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+ pthread_mutex_unlock(&mutex);
+#endif
+ return (-1);
+ }
+ if (strlen(dir) >= (size_t)len) {
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+ pthread_mutex_unlock(&mutex);
+#endif
+ return (-3);
+ }
+ strlcpy(name, dir, len);
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+ pthread_mutex_unlock(&mutex);
+#endif
+ return (ret);
+}
+
+/*
+ * Return 1 if dist value is set to 'yes' or 'on'.
+ * Return 0 if dist value is set to something else.
+ * Return negative value on error.
+ */
+int
+getacdist(void)
+{
+ char *str;
+ int ret;
+
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+ pthread_mutex_lock(&mutex);
+#endif
+ setac_locked();
+ if (getstrfromtype_locked(DIST_CONTROL_ENTRY, &str) < 0) {
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+ pthread_mutex_unlock(&mutex);
+#endif
+ return (-2);
+ }
+ if (str == NULL) {
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+ pthread_mutex_unlock(&mutex);
+#endif
+ return (0);
+ }
+ if (strcasecmp(str, "on") == 0 || strcasecmp(str, "yes") == 0)
+ ret = 1;
+ else
+ ret = 0;
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+ pthread_mutex_unlock(&mutex);
+#endif
+ return (ret);
+}
+
+/*
+ * Return the minimum free diskspace value from the audit control file.
+ */
+int
+getacmin(int *min_val)
+{
+ char *min;
+
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+ pthread_mutex_lock(&mutex);
+#endif
+ setac_locked();
+ if (getstrfromtype_locked(MINFREE_CONTROL_ENTRY, &min) < 0) {
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+ pthread_mutex_unlock(&mutex);
+#endif
+ return (-2);
+ }
+ if (min == NULL) {
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+ pthread_mutex_unlock(&mutex);
+#endif
+ return (-1);
+ }
+ *min_val = atoi(min);
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+ pthread_mutex_unlock(&mutex);
+#endif
+ return (0);
+}
+
+/*
+ * Return the desired trail rotation size from the audit control file.
+ */
+int
+getacfilesz(size_t *filesz_val)
+{
+ char *str;
+ size_t val;
+ char mult;
+ int nparsed;
+
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+ pthread_mutex_lock(&mutex);
+#endif
+ setac_locked();
+ if (getstrfromtype_locked(FILESZ_CONTROL_ENTRY, &str) < 0) {
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+ pthread_mutex_unlock(&mutex);
+#endif
+ return (-2);
+ }
+ if (str == NULL) {
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+ pthread_mutex_unlock(&mutex);
+#endif
+ errno = EINVAL;
+ return (-1);
+ }
+
+ /* Trim off any leading white space. */
+ while (*str == ' ' || *str == '\t')
+ str++;
+
+ nparsed = sscanf(str, "%ju%c", (uintmax_t *)&val, &mult);
+
+ switch (nparsed) {
+ case 1:
+ /* If no multiplier then assume 'B' (bytes). */
+ mult = 'B';
+ /* fall through */
+ case 2:
+ if (au_spacetobytes(filesz_val, val, mult) == 0)
+ break;
+ /* fall through */
+ default:
+ errno = EINVAL;
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+ pthread_mutex_unlock(&mutex);
+#endif
+ return (-1);
+ }
+
+ /*
+ * The file size must either be 0 or >= MIN_AUDIT_FILE_SIZE. 0
+ * indicates no rotation size.
+ */
+ if (*filesz_val < 0 || (*filesz_val > 0 &&
+ *filesz_val < MIN_AUDIT_FILE_SIZE)) {
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+ pthread_mutex_unlock(&mutex);
+#endif
+ filesz_val = 0L;
+ errno = EINVAL;
+ return (-1);
+ }
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+ pthread_mutex_unlock(&mutex);
+#endif
+ return (0);
+}
+
+static int
+getaccommon(const char *name, char *auditstr, int len)
+{
+ char *str;
+
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+ pthread_mutex_lock(&mutex);
+#endif
+ setac_locked();
+ if (getstrfromtype_locked(name, &str) < 0) {
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+ pthread_mutex_unlock(&mutex);
+#endif
+ return (-2);
+ }
+ if (str == NULL) {
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+ pthread_mutex_unlock(&mutex);
+#endif
+ return (-1);
+ }
+ if (strlen(str) >= (size_t)len) {
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+ pthread_mutex_unlock(&mutex);
+#endif
+ return (-3);
+ }
+ strlcpy(auditstr, str, len);
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+ pthread_mutex_unlock(&mutex);
+#endif
+ return (0);
+}
+
+/*
+ * Return the system audit value from the audit contol file.
+ */
+int
+getacflg(char *auditstr, int len)
+{
+
+ return (getaccommon(FLAGS_CONTROL_ENTRY, auditstr, len));
+}
+
+/*
+ * Return the non attributable flags from the audit contol file.
+ */
+int
+getacna(char *auditstr, int len)
+{
+
+ return (getaccommon(NA_CONTROL_ENTRY, auditstr, len));
+}
+
+/*
+ * Return the policy field from the audit control file.
+ */
+int
+getacpol(char *auditstr, size_t len)
+{
+
+ return (getaccommon(POLICY_CONTROL_ENTRY, auditstr, len));
+}
+
+int
+getachost(char *auditstr, size_t len)
+{
+
+ return (getaccommon(HOST_CONTROL_ENTRY, auditstr, len));
+}
+
+/*
+ * Set expiration conditions.
+ */
+static int
+setexpirecond(time_t *age, size_t *size, u_long value, char mult)
+{
+
+ if (isupper(mult) || ' ' == mult)
+ return (au_spacetobytes(size, value, mult));
+ else
+ return (au_timetosec(age, value, mult));
+}
+
+/*
+ * Return the expire-after field from the audit control file.
+ */
+int
+getacexpire(int *andflg, time_t *age, size_t *size)
+{
+ char *str;
+ int nparsed;
+ u_long val1, val2;
+ char mult1, mult2;
+ char andor[AU_LINE_MAX];
+
+ *age = 0L;
+ *size = 0LL;
+ *andflg = 0;
+
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+ pthread_mutex_lock(&mutex);
+#endif
+ setac_locked();
+ if (getstrfromtype_locked(EXPIRE_AFTER_CONTROL_ENTRY, &str) < 0) {
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+ pthread_mutex_unlock(&mutex);
+#endif
+ return (-2);
+ }
+ if (str == NULL) {
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+ pthread_mutex_unlock(&mutex);
+#endif
+ return (-1);
+ }
+
+ /* First, trim off any leading white space. */
+ while (*str == ' ' || *str == '\t')
+ str++;
+
+ nparsed = sscanf(str, "%lu%c%[ \tadnorADNOR]%lu%c", &val1, &mult1,
+ andor, &val2, &mult2);
+
+ switch (nparsed) {
+ case 1:
+ /* If no multiplier then assume 'B' (Bytes). */
+ mult1 = 'B';
+ /* fall through */
+ case 2:
+ /* One expiration condition. */
+ if (setexpirecond(age, size, val1, mult1) != 0) {
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+ pthread_mutex_unlock(&mutex);
+#endif
+ return (-1);
+ }
+ break;
+
+ case 5:
+ /* Two expiration conditions. */
+ if (setexpirecond(age, size, val1, mult1) != 0 ||
+ setexpirecond(age, size, val2, mult2) != 0) {
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+ pthread_mutex_unlock(&mutex);
+#endif
+ return (-1);
+ }
+ if (strcasestr(andor, "and") != NULL)
+ *andflg = 1;
+ else if (strcasestr(andor, "or") != NULL)
+ *andflg = 0;
+ else {
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+ pthread_mutex_unlock(&mutex);
+#endif
+ return (-1);
+ }
+ break;
+
+ default:
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+ pthread_mutex_unlock(&mutex);
+#endif
+ return (-1);
+ }
+
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+ pthread_mutex_unlock(&mutex);
+#endif
+ return (0);
+}
Copied: vendor/openbsm/1.2_alpha4/libbsm/bsm_domain.c (from rev 11163, vendor/openbsm/dist/libbsm/bsm_domain.c)
===================================================================
--- vendor/openbsm/1.2_alpha4/libbsm/bsm_domain.c (rev 0)
+++ vendor/openbsm/1.2_alpha4/libbsm/bsm_domain.c 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,490 @@
+/*-
+ * Copyright (c) 2008 Apple Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of Apple Inc. ("Apple") nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <sys/types.h>
+#include <sys/socket.h>
+
+#include <config/config.h>
+
+#include <bsm/audit_domain.h>
+#include <bsm/libbsm.h>
+
+struct bsm_domain {
+ u_short bd_bsm_domain;
+ int bd_local_domain;
+};
+
+#define PF_NO_LOCAL_MAPPING -600
+
+static const struct bsm_domain bsm_domains[] = {
+ { BSM_PF_UNSPEC, PF_UNSPEC },
+ { BSM_PF_LOCAL, PF_LOCAL },
+ { BSM_PF_INET, PF_INET },
+ { BSM_PF_IMPLINK,
+#ifdef PF_IMPLINK
+ PF_IMPLINK
+#else
+ PF_NO_LOCAL_MAPPING
+#endif
+ },
+ { BSM_PF_PUP,
+#ifdef PF_PUP
+ PF_PUP
+#else
+ PF_NO_LOCAL_MAPPING
+#endif
+ },
+ { BSM_PF_CHAOS,
+#ifdef PF_CHAOS
+ PF_CHAOS
+#else
+ PF_NO_LOCAL_MAPPING
+#endif
+ },
+ { BSM_PF_NS,
+#ifdef PF_NS
+ PF_NS
+#else
+ PF_NO_LOCAL_MAPPING
+#endif
+ },
+ { BSM_PF_NBS,
+#ifdef PF_NBS
+ PF_NBS
+#else
+ PF_NO_LOCAL_MAPPING
+#endif
+ },
+ { BSM_PF_ECMA,
+#ifdef PF_ECMA
+ PF_ECMA
+#else
+ PF_NO_LOCAL_MAPPING
+#endif
+ },
+ { BSM_PF_DATAKIT,
+#ifdef PF_DATAKIT
+ PF_DATAKIT
+#else
+ PF_NO_LOCAL_MAPPING
+#endif
+ },
+ { BSM_PF_CCITT,
+#ifdef PF_CCITT
+ PF_CCITT
+#else
+ PF_NO_LOCAL_MAPPING
+#endif
+ },
+ { BSM_PF_SNA, PF_SNA },
+ { BSM_PF_DECnet, PF_DECnet },
+ { BSM_PF_DLI,
+#ifdef PF_DLI
+ PF_DLI
+#else
+ PF_NO_LOCAL_MAPPING
+#endif
+ },
+ { BSM_PF_LAT,
+#ifdef PF_LAT
+ PF_LAT
+#else
+ PF_NO_LOCAL_MAPPING
+#endif
+ },
+ { BSM_PF_HYLINK,
+#ifdef PF_HYLINK
+ PF_HYLINK
+#else
+ PF_NO_LOCAL_MAPPING
+#endif
+ },
+ { BSM_PF_APPLETALK, PF_APPLETALK },
+ { BSM_PF_NIT,
+#ifdef PF_NIT
+ PF_NIT
+#else
+ PF_NO_LOCAL_MAPPING
+#endif
+ },
+ { BSM_PF_802,
+#ifdef PF_802
+ PF_802
+#else
+ PF_NO_LOCAL_MAPPING
+#endif
+ },
+ { BSM_PF_OSI,
+#ifdef PF_OSI
+ PF_OSI
+#else
+ PF_NO_LOCAL_MAPPING
+#endif
+ },
+ { BSM_PF_X25,
+#ifdef PF_X25
+ PF_X25
+#else
+ PF_NO_LOCAL_MAPPING
+#endif
+ },
+ { BSM_PF_OSINET,
+#ifdef PF_OSINET
+ PF_OSINET
+#else
+ PF_NO_LOCAL_MAPPING
+#endif
+ },
+ { BSM_PF_GOSIP,
+#ifdef PF_GOSIP
+ PF_GOSIP
+#else
+ PF_NO_LOCAL_MAPPING
+#endif
+ },
+ { BSM_PF_IPX, PF_IPX },
+ { BSM_PF_ROUTE, PF_ROUTE },
+ { BSM_PF_LINK,
+#ifdef PF_LINK
+ PF_LINK
+#else
+ PF_NO_LOCAL_MAPPING
+#endif
+ },
+ { BSM_PF_INET6, PF_INET6 },
+ { BSM_PF_KEY, PF_KEY },
+ { BSM_PF_NCA,
+#ifdef PF_NCA
+ PF_NCA
+#else
+ PF_NO_LOCAL_MAPPING
+#endif
+ },
+ { BSM_PF_POLICY,
+#ifdef PF_POLICY
+ PF_POLICY
+#else
+ PF_NO_LOCAL_MAPPING
+#endif
+ },
+ { BSM_PF_INET_OFFLOAD,
+#ifdef PF_INET_OFFLOAD
+ PF_INET_OFFLOAD
+#else
+ PF_NO_LOCAL_MAPPING
+#endif
+ },
+ { BSM_PF_NETBIOS,
+#ifdef PF_NETBIOS
+ PF_NETBIOS
+#else
+ PF_NO_LOCAL_MAPPING
+#endif
+ },
+ { BSM_PF_ISO,
+#ifdef PF_ISO
+ PF_ISO
+#else
+ PF_NO_LOCAL_MAPPING
+#endif
+ },
+ { BSM_PF_XTP,
+#ifdef PF_XTP
+ PF_XTP
+#else
+ PF_NO_LOCAL_MAPPING
+#endif
+ },
+ { BSM_PF_COIP,
+#ifdef PF_COIP
+ PF_COIP
+#else
+ PF_NO_LOCAL_MAPPING
+#endif
+ },
+ { BSM_PF_CNT,
+#ifdef PF_CNT
+ PF_CNT
+#else
+ PF_NO_LOCAL_MAPPING
+#endif
+ },
+ { BSM_PF_RTIP,
+#ifdef PF_RTIP
+ PF_RTIP
+#else
+ PF_NO_LOCAL_MAPPING
+#endif
+ },
+ { BSM_PF_SIP,
+#ifdef PF_SIP
+ PF_SIP
+#else
+ PF_NO_LOCAL_MAPPING
+#endif
+ },
+ { BSM_PF_PIP,
+#ifdef PF_PIP
+ PF_PIP
+#else
+ PF_NO_LOCAL_MAPPING
+#endif
+ },
+ { BSM_PF_ISDN,
+#ifdef PF_ISDN
+ PF_ISDN
+#else
+ PF_NO_LOCAL_MAPPING
+#endif
+ },
+ { BSM_PF_E164,
+#ifdef PF_E164
+ PF_E164
+#else
+ PF_NO_LOCAL_MAPPING
+#endif
+ },
+ { BSM_PF_NATM,
+#ifdef PF_NATM
+ PF_NATM
+#else
+ PF_NO_LOCAL_MAPPING
+#endif
+ },
+ { BSM_PF_ATM,
+#ifdef PF_ATM
+ PF_ATM
+#else
+ PF_NO_LOCAL_MAPPING
+#endif
+ },
+ { BSM_PF_NETGRAPH,
+#ifdef PF_NETGRAPH
+ PF_NETGRAPH
+#else
+ PF_NO_LOCAL_MAPPING
+#endif
+ },
+ { BSM_PF_SLOW,
+#ifdef PF_SLOW
+ PF_SLOW
+#else
+ PF_NO_LOCAL_MAPPING
+#endif
+ },
+ { BSM_PF_SCLUSTER,
+#ifdef PF_SCLUSTER
+ PF_SCLUSTER
+#else
+ PF_NO_LOCAL_MAPPING
+#endif
+ },
+ { BSM_PF_ARP,
+#ifdef PF_ARP
+ PF_ARP
+#else
+ PF_NO_LOCAL_MAPPING
+#endif
+ },
+ { BSM_PF_BLUETOOTH,
+#ifdef PF_BLUETOOTH
+ PF_BLUETOOTH
+#else
+ PF_NO_LOCAL_MAPPING
+#endif
+ },
+ { BSM_PF_AX25,
+#ifdef PF_AX25
+ PF_AX25
+#else
+ PF_NO_LOCAL_MAPPING
+#endif
+ },
+ { BSM_PF_ROSE,
+#ifdef PF_ROSE
+ PF_ROSE
+#else
+ PF_NO_LOCAL_MAPPING
+#endif
+ },
+ { BSM_PF_NETBEUI,
+#ifdef PF_NETBEUI
+ PF_NETBEUI
+#else
+ PF_NO_LOCAL_MAPPING
+#endif
+ },
+ { BSM_PF_SECURITY,
+#ifdef PF_SECURITY
+ PF_SECURITY
+#else
+ PF_NO_LOCAL_MAPPING
+#endif
+ },
+ { BSM_PF_PACKET,
+#ifdef PF_PACKET
+ PF_PACKET
+#else
+ PF_NO_LOCAL_MAPPING
+#endif
+ },
+ { BSM_PF_ASH,
+#ifdef PF_ASH
+ PF_ASH
+#else
+ PF_NO_LOCAL_MAPPING
+#endif
+ },
+ { BSM_PF_ECONET,
+#ifdef PF_ECONET
+ PF_ECONET
+#else
+ PF_NO_LOCAL_MAPPING
+#endif
+ },
+ { BSM_PF_ATMSVC,
+#ifdef PF_ATMSVC
+ PF_ATMSVC
+#else
+ PF_NO_LOCAL_MAPPING
+#endif
+ },
+ { BSM_PF_IRDA,
+#ifdef PF_IRDA
+ PF_IRDA
+#else
+ PF_NO_LOCAL_MAPPING
+#endif
+ },
+ { BSM_PF_PPPOX,
+#ifdef PF_PPPOX
+ PF_PPPOX
+#else
+ PF_NO_LOCAL_MAPPING
+#endif
+ },
+ { BSM_PF_WANPIPE,
+#ifdef PF_WANPIPE
+ PF_WANPIPE
+#else
+ PF_NO_LOCAL_MAPPING
+#endif
+ },
+ { BSM_PF_LLC,
+#ifdef PF_LLC
+ PF_LLC
+#else
+ PF_NO_LOCAL_MAPPING
+#endif
+ },
+ { BSM_PF_CAN,
+#ifdef PF_CAN
+ PF_CAN
+#else
+ PF_NO_LOCAL_MAPPING
+#endif
+ },
+ { BSM_PF_TIPC,
+#ifdef PF_TIPC
+ PF_TIPC
+#else
+ PF_NO_LOCAL_MAPPING
+#endif
+ },
+ { BSM_PF_IUCV,
+#ifdef PF_IUCV
+ PF_IUCV
+#else
+ PF_NO_LOCAL_MAPPING
+#endif
+ },
+ { BSM_PF_RXRPC,
+#ifdef PF_RXRPC
+ PF_RXRPC
+#else
+ PF_NO_LOCAL_MAPPING
+#endif
+ },
+ { BSM_PF_PHONET,
+#ifdef PF_PHONET
+ PF_PHONET
+#else
+ PF_NO_LOCAL_MAPPING
+#endif
+ },
+};
+static const int bsm_domains_count = sizeof(bsm_domains) /
+ sizeof(bsm_domains[0]);
+
+static const struct bsm_domain *
+bsm_lookup_local_domain(int local_domain)
+{
+ int i;
+
+ for (i = 0; i < bsm_domains_count; i++) {
+ if (bsm_domains[i].bd_local_domain == local_domain)
+ return (&bsm_domains[i]);
+ }
+ return (NULL);
+}
+
+u_short
+au_domain_to_bsm(int local_domain)
+{
+ const struct bsm_domain *bstp;
+
+ bstp = bsm_lookup_local_domain(local_domain);
+ if (bstp == NULL)
+ return (BSM_PF_UNKNOWN);
+ return (bstp->bd_bsm_domain);
+}
+
+static const struct bsm_domain *
+bsm_lookup_bsm_domain(u_short bsm_domain)
+{
+ int i;
+
+ for (i = 0; i < bsm_domains_count; i++) {
+ if (bsm_domains[i].bd_bsm_domain == bsm_domain)
+ return (&bsm_domains[i]);
+ }
+ return (NULL);
+}
+
+int
+au_bsm_to_domain(u_short bsm_domain, int *local_domainp)
+{
+ const struct bsm_domain *bstp;
+
+ bstp = bsm_lookup_bsm_domain(bsm_domain);
+ if (bstp == NULL || bstp->bd_local_domain)
+ return (-1);
+ *local_domainp = bstp->bd_local_domain;
+ return (0);
+}
Copied: vendor/openbsm/1.2_alpha4/libbsm/bsm_errno.c (from rev 11163, vendor/openbsm/dist/libbsm/bsm_errno.c)
===================================================================
--- vendor/openbsm/1.2_alpha4/libbsm/bsm_errno.c (rev 0)
+++ vendor/openbsm/1.2_alpha4/libbsm/bsm_errno.c 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,771 @@
+/*-
+ * Copyright (c) 2008 Apple Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of Apple Inc. ("Apple") nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <sys/types.h>
+
+#include <config/config.h>
+
+#include <bsm/audit_errno.h>
+#include <bsm/libbsm.h>
+
+#include <errno.h>
+#include <string.h>
+
+/*
+ * Different operating systems use different numeric constants for different
+ * error numbers, and sometimes error numbers don't exist in more than one
+ * operating system. These routines convert between BSM and local error
+ * number spaces, subject to the above realities. BSM error numbers are
+ * stored in a single 8-bit character, so don't have a byte order.
+ *
+ * Don't include string definitions when this code is compiled into a kernel.
+ */
+struct bsm_errno {
+ int be_bsm_errno;
+ int be_local_errno;
+#if !defined(KERNEL) && !defined(_KERNEL)
+ const char *be_strerror;
+#endif
+};
+
+#define ERRNO_NO_LOCAL_MAPPING -600
+
+#if !defined(KERNEL) && !defined(_KERNEL)
+#define ES(x) x
+#else
+#define ES(x)
+#endif
+
+/*
+ * Mapping table -- please maintain in numeric sorted order with respect to
+ * the BSM constant. Today we do a linear lookup, but could switch to a
+ * binary search if it makes sense. We only ifdef errors that aren't
+ * generally available, but it does make the table a lot more ugly.
+ *
+ * XXXRW: It would be nice to have a similar ordered table mapping to BSM
+ * constant from local constant, but the order of local constants varies by
+ * OS. Really we need to build that table at compile-time but don't do that
+ * yet.
+ *
+ * XXXRW: We currently embed English-language error strings here, but should
+ * support catalogues; these are only used if the OS doesn't have an error
+ * string using strerror(3).
+ */
+static const struct bsm_errno bsm_errnos[] = {
+ { BSM_ERRNO_ESUCCESS, 0, ES("Success") },
+ { BSM_ERRNO_EPERM, EPERM, ES("Operation not permitted") },
+ { BSM_ERRNO_ENOENT, ENOENT, ES("No such file or directory") },
+ { BSM_ERRNO_ESRCH, ESRCH, ES("No such process") },
+ { BSM_ERRNO_EINTR, EINTR, ES("Interrupted system call") },
+ { BSM_ERRNO_EIO, EIO, ES("Input/output error") },
+ { BSM_ERRNO_ENXIO, ENXIO, ES("Device not configured") },
+ { BSM_ERRNO_E2BIG, E2BIG, ES("Argument list too long") },
+ { BSM_ERRNO_ENOEXEC, ENOEXEC, ES("Exec format error") },
+ { BSM_ERRNO_EBADF, EBADF, ES("Bad file descriptor") },
+ { BSM_ERRNO_ECHILD, ECHILD, ES("No child processes") },
+ { BSM_ERRNO_EAGAIN, EAGAIN, ES("Resource temporarily unavailable") },
+ { BSM_ERRNO_ENOMEM, ENOMEM, ES("Cannot allocate memory") },
+ { BSM_ERRNO_EACCES, EACCES, ES("Permission denied") },
+ { BSM_ERRNO_EFAULT, EFAULT, ES("Bad address") },
+ { BSM_ERRNO_ENOTBLK, ENOTBLK, ES("Block device required") },
+ { BSM_ERRNO_EBUSY, EBUSY, ES("Device busy") },
+ { BSM_ERRNO_EEXIST, EEXIST, ES("File exists") },
+ { BSM_ERRNO_EXDEV, EXDEV, ES("Cross-device link") },
+ { BSM_ERRNO_ENODEV, ENODEV, ES("Operation not supported by device") },
+ { BSM_ERRNO_ENOTDIR, ENOTDIR, ES("Not a directory") },
+ { BSM_ERRNO_EISDIR, EISDIR, ES("Is a directory") },
+ { BSM_ERRNO_EINVAL, EINVAL, ES("Invalid argument") },
+ { BSM_ERRNO_ENFILE, ENFILE, ES("Too many open files in system") },
+ { BSM_ERRNO_EMFILE, EMFILE, ES("Too many open files") },
+ { BSM_ERRNO_ENOTTY, ENOTTY, ES("Inappropriate ioctl for device") },
+ { BSM_ERRNO_ETXTBSY, ETXTBSY, ES("Text file busy") },
+ { BSM_ERRNO_EFBIG, EFBIG, ES("File too large") },
+ { BSM_ERRNO_ENOSPC, ENOSPC, ES("No space left on device") },
+ { BSM_ERRNO_ESPIPE, ESPIPE, ES("Illegal seek") },
+ { BSM_ERRNO_EROFS, EROFS, ES("Read-only file system") },
+ { BSM_ERRNO_EMLINK, EMLINK, ES("Too many links") },
+ { BSM_ERRNO_EPIPE, EPIPE, ES("Broken pipe") },
+ { BSM_ERRNO_EDOM, EDOM, ES("Numerical argument out of domain") },
+ { BSM_ERRNO_ERANGE, ERANGE, ES("Result too large") },
+ { BSM_ERRNO_ENOMSG, ENOMSG, ES("No message of desired type") },
+ { BSM_ERRNO_EIDRM, EIDRM, ES("Identifier removed") },
+ { BSM_ERRNO_ECHRNG,
+#ifdef ECHRNG
+ ECHRNG,
+#else
+ ERRNO_NO_LOCAL_MAPPING,
+#endif
+ ES("Channel number out of range") },
+ { BSM_ERRNO_EL2NSYNC,
+#ifdef EL2NSYNC
+ EL2NSYNC,
+#else
+ ERRNO_NO_LOCAL_MAPPING,
+#endif
+ ES("Level 2 not synchronized") },
+ { BSM_ERRNO_EL3HLT,
+#ifdef EL3HLT
+ EL3HLT,
+#else
+ ERRNO_NO_LOCAL_MAPPING,
+#endif
+ ES("Level 3 halted") },
+ { BSM_ERRNO_EL3RST,
+#ifdef EL3RST
+ EL3RST,
+#else
+ ERRNO_NO_LOCAL_MAPPING,
+#endif
+ ES("Level 3 reset") },
+ { BSM_ERRNO_ELNRNG,
+#ifdef ELNRNG
+ ELNRNG,
+#else
+ ERRNO_NO_LOCAL_MAPPING,
+#endif
+ ES("Link number out of range") },
+ { BSM_ERRNO_EUNATCH,
+#ifdef EUNATCH
+ EUNATCH,
+#else
+ ERRNO_NO_LOCAL_MAPPING,
+#endif
+ ES("Protocol driver not attached") },
+ { BSM_ERRNO_ENOCSI,
+#ifdef ENOCSI
+ ENOCSI,
+#else
+ ERRNO_NO_LOCAL_MAPPING,
+#endif
+ ES("No CSI structure available") },
+ { BSM_ERRNO_EL2HLT,
+#ifdef EL2HLT
+ EL2HLT,
+#else
+ ERRNO_NO_LOCAL_MAPPING,
+#endif
+ ES("Level 2 halted") },
+ { BSM_ERRNO_EDEADLK, EDEADLK, ES("Resource deadlock avoided") },
+ { BSM_ERRNO_ENOLCK, ENOLCK, ES("No locks available") },
+ { BSM_ERRNO_ECANCELED, ECANCELED, ES("Operation canceled") },
+ { BSM_ERRNO_ENOTSUP, ENOTSUP, ES("Operation not supported") },
+ { BSM_ERRNO_EDQUOT, EDQUOT, ES("Disc quota exceeded") },
+ { BSM_ERRNO_EBADE,
+#ifdef EBADE
+ EBADE,
+#else
+ ERRNO_NO_LOCAL_MAPPING,
+#endif
+ ES("Invalid exchange") },
+ { BSM_ERRNO_EBADR,
+#ifdef EBADR
+ EBADR,
+#else
+ ERRNO_NO_LOCAL_MAPPING,
+#endif
+ ES("Invalid request descriptor") },
+ { BSM_ERRNO_EXFULL,
+#ifdef EXFULL
+ EXFULL,
+#else
+ ERRNO_NO_LOCAL_MAPPING,
+#endif
+ ES("Exchange full") },
+ { BSM_ERRNO_ENOANO,
+#ifdef ENOANO
+ ENOANO,
+#else
+ ERRNO_NO_LOCAL_MAPPING,
+#endif
+ ES("No anode") },
+ { BSM_ERRNO_EBADRQC,
+#ifdef EBADRQC
+ EBADRQC,
+#else
+ ERRNO_NO_LOCAL_MAPPING,
+#endif
+ ES("Invalid request descriptor") },
+ { BSM_ERRNO_EBADSLT,
+#ifdef EBADSLT
+ EBADSLT,
+#else
+ ERRNO_NO_LOCAL_MAPPING,
+#endif
+ ES("Invalid slot") },
+ { BSM_ERRNO_EDEADLOCK,
+#ifdef EDEADLOCK
+ EDEADLOCK,
+#else
+ ERRNO_NO_LOCAL_MAPPING,
+#endif
+ ES("Resource deadlock avoided") },
+ { BSM_ERRNO_EBFONT,
+#ifdef EBFONT
+ EBFONT,
+#else
+ ERRNO_NO_LOCAL_MAPPING,
+#endif
+ ES("Bad font file format") },
+ { BSM_ERRNO_EOWNERDEAD,
+#ifdef EOWNERDEAD
+ EOWNERDEAD,
+#else
+ ERRNO_NO_LOCAL_MAPPING,
+#endif
+ ES("Process died with the lock") },
+ { BSM_ERRNO_ENOTRECOVERABLE,
+#ifdef ENOTRECOVERABLE
+ ENOTRECOVERABLE,
+#else
+ ERRNO_NO_LOCAL_MAPPING,
+#endif
+ ES("Lock is not recoverable") },
+ { BSM_ERRNO_ENOSTR,
+#ifdef ENOSTR
+ ENOSTR,
+#else
+ ERRNO_NO_LOCAL_MAPPING,
+#endif
+ ES("Device not a stream") },
+ { BSM_ERRNO_ENONET,
+#ifdef ENONET
+ ENONET,
+#else
+ ERRNO_NO_LOCAL_MAPPING,
+#endif
+ ES("Machine is not on the network") },
+ { BSM_ERRNO_ENOPKG,
+#ifdef ENOPKG
+ ENOPKG,
+#else
+ ERRNO_NO_LOCAL_MAPPING,
+#endif
+ ES("Package not installed") },
+ { BSM_ERRNO_EREMOTE, EREMOTE,
+ ES("Too many levels of remote in path") },
+ { BSM_ERRNO_ENOLINK,
+#ifdef ENOLINK
+ ENOLINK,
+#else
+ ERRNO_NO_LOCAL_MAPPING,
+#endif
+ ES("Link has been severed") },
+ { BSM_ERRNO_EADV,
+#ifdef EADV
+ EADV,
+#else
+ ERRNO_NO_LOCAL_MAPPING,
+#endif
+ ES("Advertise error") },
+ { BSM_ERRNO_ESRMNT,
+#ifdef ESRMNT
+ ESRMNT,
+#else
+ ERRNO_NO_LOCAL_MAPPING,
+#endif
+ ES("srmount error") },
+ { BSM_ERRNO_ECOMM,
+#ifdef ECOMM
+ ECOMM,
+#else
+ ERRNO_NO_LOCAL_MAPPING,
+#endif
+ ES("Communication error on send") },
+ { BSM_ERRNO_EPROTO,
+#ifdef EPROTO
+ EPROTO,
+#else
+ ERRNO_NO_LOCAL_MAPPING,
+#endif
+ ES("Protocol error") },
+ { BSM_ERRNO_ELOCKUNMAPPED,
+#ifdef ELOCKUNMAPPED
+ ELOCKUNMAPPED,
+#else
+ ERRNO_NO_LOCAL_MAPPING,
+#endif
+ ES("Locked lock was unmapped") },
+ { BSM_ERRNO_ENOTACTIVE,
+#ifdef ENOTACTIVE
+ ENOTACTIVE,
+#else
+ ERRNO_NO_LOCAL_MAPPING,
+#endif
+ ES("Facility is not active") },
+ { BSM_ERRNO_EMULTIHOP,
+#ifdef EMULTIHOP
+ EMULTIHOP,
+#else
+ ERRNO_NO_LOCAL_MAPPING,
+#endif
+ ES("Multihop attempted") },
+ { BSM_ERRNO_EBADMSG,
+#ifdef EBADMSG
+ EBADMSG,
+#else
+ ERRNO_NO_LOCAL_MAPPING,
+#endif
+ ES("Bad message") },
+ { BSM_ERRNO_ENAMETOOLONG, ENAMETOOLONG, ES("File name too long") },
+ { BSM_ERRNO_EOVERFLOW, EOVERFLOW,
+ ES("Value too large to be stored in data type") },
+ { BSM_ERRNO_ENOTUNIQ,
+#ifdef ENOTUNIQ
+ ENOTUNIQ,
+#else
+ ERRNO_NO_LOCAL_MAPPING,
+#endif
+ ES("Given log name not unique") },
+ { BSM_ERRNO_EBADFD,
+#ifdef EBADFD
+ EBADFD,
+#else
+ ERRNO_NO_LOCAL_MAPPING,
+#endif
+ ES("Given f.d. invalid for this operation") },
+ { BSM_ERRNO_EREMCHG,
+#ifdef EREMCHG
+ EREMCHG,
+#else
+ ERRNO_NO_LOCAL_MAPPING,
+#endif
+ ES("Remote address changed") },
+ { BSM_ERRNO_ELIBACC,
+#ifdef ELIBACC
+ ELIBACC,
+#else
+ ERRNO_NO_LOCAL_MAPPING,
+#endif
+ ES("Can't access a needed shared lib") },
+ { BSM_ERRNO_ELIBBAD,
+#ifdef ELIBBAD
+ ELIBBAD,
+#else
+ ERRNO_NO_LOCAL_MAPPING,
+#endif
+ ES("Accessing a corrupted shared lib") },
+ { BSM_ERRNO_ELIBSCN,
+#ifdef ELIBSCN
+ ELIBSCN,
+#else
+ ERRNO_NO_LOCAL_MAPPING,
+#endif
+ ES(".lib section in a.out corrupted") },
+ { BSM_ERRNO_ELIBMAX,
+#ifdef ELIBMAX
+ ELIBMAX,
+#else
+ ERRNO_NO_LOCAL_MAPPING,
+#endif
+ ES("Attempting to link in too many libs") },
+ { BSM_ERRNO_ELIBEXEC,
+#ifdef ELIBEXEC
+ ELIBEXEC,
+#else
+ ERRNO_NO_LOCAL_MAPPING,
+#endif
+ ES("Attempting to exec a shared library") },
+ { BSM_ERRNO_EILSEQ, EILSEQ, ES("Illegal byte sequence") },
+ { BSM_ERRNO_ENOSYS, ENOSYS, ES("Function not implemented") },
+ { BSM_ERRNO_ELOOP, ELOOP, ES("Too many levels of symbolic links") },
+ { BSM_ERRNO_ERESTART,
+#ifdef ERESTART
+ ERESTART,
+#else
+ ERRNO_NO_LOCAL_MAPPING,
+#endif
+ ES("Restart syscall") },
+ { BSM_ERRNO_ESTRPIPE,
+#ifdef ESTRPIPE
+ ESTRPIPE,
+#else
+ ERRNO_NO_LOCAL_MAPPING,
+#endif
+ ES("If pipe/FIFO, don't sleep in stream head") },
+ { BSM_ERRNO_ENOTEMPTY, ENOTEMPTY, ES("Directory not empty") },
+ { BSM_ERRNO_EUSERS, EUSERS, ES("Too many users") },
+ { BSM_ERRNO_ENOTSOCK, ENOTSOCK,
+ ES("Socket operation on non-socket") },
+ { BSM_ERRNO_EDESTADDRREQ, EDESTADDRREQ,
+ ES("Destination address required") },
+ { BSM_ERRNO_EMSGSIZE, EMSGSIZE, ES("Message too long") },
+ { BSM_ERRNO_EPROTOTYPE, EPROTOTYPE,
+ ES("Protocol wrong type for socket") },
+ { BSM_ERRNO_ENOPROTOOPT, ENOPROTOOPT, ES("Protocol not available") },
+ { BSM_ERRNO_EPROTONOSUPPORT, EPROTONOSUPPORT,
+ ES("Protocol not supported") },
+ { BSM_ERRNO_ESOCKTNOSUPPORT, ESOCKTNOSUPPORT,
+ ES("Socket type not supported") },
+ { BSM_ERRNO_EOPNOTSUPP, EOPNOTSUPP, ES("Operation not supported") },
+ { BSM_ERRNO_EPFNOSUPPORT, EPFNOSUPPORT,
+ ES("Protocol family not supported") },
+ { BSM_ERRNO_EAFNOSUPPORT, EAFNOSUPPORT,
+ ES("Address family not supported by protocol family") },
+ { BSM_ERRNO_EADDRINUSE, EADDRINUSE, ES("Address already in use") },
+ { BSM_ERRNO_EADDRNOTAVAIL, EADDRNOTAVAIL,
+ ES("Can't assign requested address") },
+ { BSM_ERRNO_ENETDOWN, ENETDOWN, ES("Network is down") },
+ { BSM_ERRNO_ENETRESET, ENETRESET,
+ ES("Network dropped connection on reset") },
+ { BSM_ERRNO_ECONNABORTED, ECONNABORTED,
+ ES("Software caused connection abort") },
+ { BSM_ERRNO_ECONNRESET, ECONNRESET, ES("Connection reset by peer") },
+ { BSM_ERRNO_ENOBUFS, ENOBUFS, ES("No buffer space available") },
+ { BSM_ERRNO_EISCONN, EISCONN, ES("Socket is already connected") },
+ { BSM_ERRNO_ENOTCONN, ENOTCONN, ES("Socket is not connected") },
+ { BSM_ERRNO_ESHUTDOWN, ESHUTDOWN,
+ ES("Can't send after socket shutdown") },
+ { BSM_ERRNO_ETOOMANYREFS, ETOOMANYREFS,
+ ES("Too many references: can't splice") },
+ { BSM_ERRNO_ETIMEDOUT, ETIMEDOUT, ES("Operation timed out") },
+ { BSM_ERRNO_ECONNREFUSED, ECONNREFUSED, ES("Connection refused") },
+ { BSM_ERRNO_EHOSTDOWN, EHOSTDOWN, ES("Host is down") },
+ { BSM_ERRNO_EHOSTUNREACH, EHOSTUNREACH, ES("No route to host") },
+ { BSM_ERRNO_EALREADY, EALREADY, ES("Operation already in progress") },
+ { BSM_ERRNO_EINPROGRESS, EINPROGRESS,
+ ES("Operation now in progress") },
+ { BSM_ERRNO_ESTALE, ESTALE, ES("Stale NFS file handle") },
+ { BSM_ERRNO_EPROCLIM,
+#ifdef EPROCLIM
+ EPROCLIM,
+#else
+ ERRNO_NO_LOCAL_MAPPING,
+#endif
+ ES("Too many processes") },
+ { BSM_ERRNO_EBADRPC,
+#ifdef EBADRPC
+ EBADRPC,
+#else
+ ERRNO_NO_LOCAL_MAPPING,
+#endif
+ ES("RPC struct is bad") },
+ { BSM_ERRNO_ERPCMISMATCH,
+#ifdef ERPCMISMATCH
+ ERPCMISMATCH,
+#else
+ ERRNO_NO_LOCAL_MAPPING,
+#endif
+ ES("RPC version wrong") },
+ { BSM_ERRNO_EPROGUNAVAIL,
+#ifdef EPROGUNAVAIL
+ EPROGUNAVAIL,
+#else
+ ERRNO_NO_LOCAL_MAPPING,
+#endif
+ ES("RPC prog. not avail") },
+ { BSM_ERRNO_EPROGMISMATCH,
+#ifdef EPROGMISMATCH
+ EPROGMISMATCH,
+#else
+ ERRNO_NO_LOCAL_MAPPING,
+#endif
+ ES("RPC version wrong") },
+ { BSM_ERRNO_EPROCUNAVAIL,
+#ifdef EPROCUNAVAIL
+ EPROCUNAVAIL,
+#else
+ ERRNO_NO_LOCAL_MAPPING,
+#endif
+ ES("Bad procedure for program") },
+ { BSM_ERRNO_EFTYPE,
+#ifdef EFTYPE
+ EFTYPE,
+#else
+ ERRNO_NO_LOCAL_MAPPING,
+#endif
+ ES("Inappropriate file type or format") },
+ { BSM_ERRNO_EAUTH,
+#ifdef EAUTH
+ EAUTH,
+#else
+ ERRNO_NO_LOCAL_MAPPING,
+#endif
+ ES("Authenticateion error") },
+ { BSM_ERRNO_ENEEDAUTH,
+#ifdef ENEEDAUTH
+ ENEEDAUTH,
+#else
+ ERRNO_NO_LOCAL_MAPPING,
+#endif
+ ES("Need authenticator") },
+ { BSM_ERRNO_ENOATTR,
+#ifdef ENOATTR
+ ENOATTR,
+#else
+ ERRNO_NO_LOCAL_MAPPING,
+#endif
+ ES("Attribute not found") },
+ { BSM_ERRNO_EDOOFUS,
+#ifdef EDOOFUS
+ EDOOFUS,
+#else
+ ERRNO_NO_LOCAL_MAPPING,
+#endif
+ ES("Programming error") },
+ { BSM_ERRNO_EJUSTRETURN,
+#ifdef EJUSTRETURN
+ EJUSTRETURN,
+#else
+ ERRNO_NO_LOCAL_MAPPING,
+#endif
+ ES("Just return") },
+ { BSM_ERRNO_ENOIOCTL,
+#ifdef ENOIOCTL
+ ENOIOCTL,
+#else
+ ERRNO_NO_LOCAL_MAPPING,
+#endif
+ ES("ioctl not handled by this layer") },
+ { BSM_ERRNO_EDIRIOCTL,
+#ifdef EDIRIOCTL
+ EDIRIOCTL,
+#else
+ ERRNO_NO_LOCAL_MAPPING,
+#endif
+ ES("do direct ioctl in GEOM") },
+ { BSM_ERRNO_EPWROFF,
+#ifdef EPWROFF
+ EPWROFF,
+#else
+ ERRNO_NO_LOCAL_MAPPING,
+#endif
+ ES("Device power is off") },
+ { BSM_ERRNO_EDEVERR,
+#ifdef EDEVERR
+ EDEVERR,
+#else
+ ERRNO_NO_LOCAL_MAPPING,
+#endif
+ ES("Device error") },
+ { BSM_ERRNO_EBADEXEC,
+#ifdef EBADEXEC
+ EBADEXEC,
+#else
+ ERRNO_NO_LOCAL_MAPPING,
+#endif
+ ES("Bad executable") },
+ { BSM_ERRNO_EBADARCH,
+#ifdef EBADARCH
+ EBADARCH,
+#else
+ ERRNO_NO_LOCAL_MAPPING,
+#endif
+ ES("Bad CPU type in executable") },
+ { BSM_ERRNO_ESHLIBVERS,
+#ifdef ESHLIBVERS
+ ESHLIBVERS,
+#else
+ ERRNO_NO_LOCAL_MAPPING,
+#endif
+ ES("Shared library version mismatch") },
+ { BSM_ERRNO_EBADMACHO,
+#ifdef EBADMACHO
+ EBADMACHO,
+#else
+ ERRNO_NO_LOCAL_MAPPING,
+#endif
+ ES("Malformed Macho file") },
+ { BSM_ERRNO_EPOLICY,
+#ifdef EPOLICY
+ EPOLICY,
+#else
+ ERRNO_NO_LOCAL_MAPPING,
+#endif
+ ES("Operation failed by policy") },
+ { BSM_ERRNO_EDOTDOT,
+#ifdef EDOTDOT
+ EDOTDOT,
+#else
+ ERRNO_NO_LOCAL_MAPPING,
+#endif
+ ES("RFS specific error") },
+ { BSM_ERRNO_EUCLEAN,
+#ifdef EUCLEAN
+ EUCLEAN,
+#else
+ ERRNO_NO_LOCAL_MAPPING,
+#endif
+ ES("Structure needs cleaning") },
+ { BSM_ERRNO_ENOTNAM,
+#ifdef ENOTNAM
+ ENOTNAM,
+#else
+ ERRNO_NO_LOCAL_MAPPING,
+#endif
+ ES("Not a XENIX named type file") },
+ { BSM_ERRNO_ENAVAIL,
+#ifdef ENAVAIL
+ ENAVAIL,
+#else
+ ERRNO_NO_LOCAL_MAPPING,
+#endif
+ ES("No XENIX semaphores available") },
+ { BSM_ERRNO_EISNAM,
+#ifdef EISNAM
+ EISNAM,
+#else
+ ERRNO_NO_LOCAL_MAPPING,
+#endif
+ ES("Is a named type file") },
+ { BSM_ERRNO_EREMOTEIO,
+#ifdef EREMOTEIO
+ EREMOTEIO,
+#else
+ ERRNO_NO_LOCAL_MAPPING,
+#endif
+ ES("Remote I/O error") },
+ { BSM_ERRNO_ENOMEDIUM,
+#ifdef ENOMEDIUM
+ ENOMEDIUM,
+#else
+ ERRNO_NO_LOCAL_MAPPING,
+#endif
+ ES("No medium found") },
+ { BSM_ERRNO_EMEDIUMTYPE,
+#ifdef EMEDIUMTYPE
+ EMEDIUMTYPE,
+#else
+ ERRNO_NO_LOCAL_MAPPING,
+#endif
+ ES("Wrong medium type") },
+ { BSM_ERRNO_ENOKEY,
+#ifdef ENOKEY
+ ENOKEY,
+#else
+ ERRNO_NO_LOCAL_MAPPING,
+#endif
+ ES("Required key not available") },
+ { BSM_ERRNO_EKEYEXPIRED,
+#ifdef EKEYEXPIRED
+ EKEYEXPIRED,
+#else
+ ERRNO_NO_LOCAL_MAPPING,
+#endif
+ ES("Key has expired") },
+ { BSM_ERRNO_EKEYREVOKED,
+#ifdef EKEYREVOKED
+ EKEYREVOKED,
+#else
+ ERRNO_NO_LOCAL_MAPPING,
+#endif
+ ES("Key has been revoked") },
+ { BSM_ERRNO_EKEYREJECTED,
+#ifdef EKEYREJECTED
+ EKEYREJECTED,
+#else
+ ERRNO_NO_LOCAL_MAPPING,
+#endif
+ ES("Key was rejected by service") },
+ { BSM_ERRNO_ENOTCAPABLE,
+#ifdef ENOTCAPABLE
+ ENOTCAPABLE,
+#else
+ ERRNO_NO_LOCAL_MAPPING,
+#endif
+ ES("Capabilities insufficient") },
+ { BSM_ERRNO_ECAPMODE,
+#ifdef ECAPMODE
+ ECAPMODE,
+#else
+ ERRNO_NO_LOCAL_MAPPING,
+#endif
+ ES("Not permitted in capability mode") },
+};
+static const int bsm_errnos_count = sizeof(bsm_errnos) / sizeof(bsm_errnos[0]);
+
+static const struct bsm_errno *
+bsm_lookup_errno_local(int local_errno)
+{
+ int i;
+
+ for (i = 0; i < bsm_errnos_count; i++) {
+ if (bsm_errnos[i].be_local_errno == local_errno)
+ return (&bsm_errnos[i]);
+ }
+ return (NULL);
+}
+
+/*
+ * Conversion to the BSM errno space isn't allowed to fail; we simply map to
+ * BSM_ERRNO_UNKNOWN and let the remote endpoint deal with it.
+ */
+u_char
+au_errno_to_bsm(int local_errno)
+{
+ const struct bsm_errno *bsme;
+
+ bsme = bsm_lookup_errno_local(local_errno);
+ if (bsme == NULL)
+ return (BSM_ERRNO_UNKNOWN);
+ return (bsme->be_bsm_errno);
+}
+
+static const struct bsm_errno *
+bsm_lookup_errno_bsm(u_char bsm_errno)
+{
+ int i;
+
+ for (i = 0; i < bsm_errnos_count; i++) {
+ if (bsm_errnos[i].be_bsm_errno == bsm_errno)
+ return (&bsm_errnos[i]);
+ }
+ return (NULL);
+}
+
+/*
+ * Converstion from a BSM error to a local error number may fail if either
+ * OpenBSM doesn't recognize the error on the wire, or because there is no
+ * appropriate local mapping.
+ */
+int
+au_bsm_to_errno(u_char bsm_errno, int *errorp)
+{
+ const struct bsm_errno *bsme;
+
+ bsme = bsm_lookup_errno_bsm(bsm_errno);
+ if (bsme == NULL || bsme->be_local_errno == ERRNO_NO_LOCAL_MAPPING)
+ return (-1);
+ *errorp = bsme->be_local_errno;
+ return (0);
+}
+
+#if !defined(KERNEL) && !defined(_KERNEL)
+const char *
+au_strerror(u_char bsm_errno)
+{
+ const struct bsm_errno *bsme;
+
+ bsme = bsm_lookup_errno_bsm(bsm_errno);
+ if (bsme == NULL)
+ return ("Unrecognized BSM error");
+ if (bsme->be_local_errno != ERRNO_NO_LOCAL_MAPPING)
+ return (strerror(bsme->be_local_errno));
+ return (bsme->be_strerror);
+}
+#endif
Deleted: vendor/openbsm/1.2_alpha4/libbsm/bsm_event.c
===================================================================
--- vendor/openbsm/dist/libbsm/bsm_event.c 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/libbsm/bsm_event.c 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,332 +0,0 @@
-/*
- * Copyright (c) 2004 Apple Computer, Inc.
- * Copyright (c) 2006 Robert N. M. Watson
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. Neither the name of Apple Computer, Inc. ("Apple") nor the names of
- * its contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR
- * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
- * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- * $P4: //depot/projects/trustedbsd/openbsm/libbsm/bsm_event.c#13 $
- */
-
-#include <bsm/libbsm.h>
-
-#include <string.h>
-#include <pthread.h>
-#include <stdio.h>
-#include <stdlib.h>
-
-/*
- * Parse the contents of the audit_event file to return
- * au_event_ent entries
- */
-static FILE *fp = NULL;
-static char linestr[AU_LINE_MAX];
-static const char *eventdelim = ":";
-
-static pthread_mutex_t mutex = PTHREAD_MUTEX_INITIALIZER;
-
-/*
- * Parse one line from the audit_event file into the au_event_ent structure.
- */
-static struct au_event_ent *
-eventfromstr(char *str, struct au_event_ent *e)
-{
- char *evno, *evname, *evdesc, *evclass;
- struct au_mask evmask;
- char *last;
-
- evno = strtok_r(str, eventdelim, &last);
- evname = strtok_r(NULL, eventdelim, &last);
- evdesc = strtok_r(NULL, eventdelim, &last);
- evclass = strtok_r(NULL, eventdelim, &last);
-
- if ((evno == NULL) || (evname == NULL))
- return (NULL);
-
- if (strlen(evname) >= AU_EVENT_NAME_MAX)
- return (NULL);
-
- strcpy(e->ae_name, evname);
- if (evdesc != NULL) {
- if (strlen(evdesc) >= AU_EVENT_DESC_MAX)
- return (NULL);
- strcpy(e->ae_desc, evdesc);
- } else
- strcpy(e->ae_desc, "");
-
- e->ae_number = atoi(evno);
-
- /*
- * Find out the mask that corresponds to the given list of classes.
- */
- if (evclass != NULL) {
- if (getauditflagsbin(evclass, &evmask) != 0)
- e->ae_class = 0;
- else
- e->ae_class = evmask.am_success;
- } else
- e->ae_class = 0;
-
- return (e);
-}
-
-/*
- * Rewind the audit_event file.
- */
-static void
-setauevent_locked(void)
-{
-
- if (fp != NULL)
- fseek(fp, 0, SEEK_SET);
-}
-
-void
-setauevent(void)
-{
-
- pthread_mutex_lock(&mutex);
- setauevent_locked();
- pthread_mutex_unlock(&mutex);
-}
-
-/*
- * Close the open file pointers.
- */
-void
-endauevent(void)
-{
-
- pthread_mutex_lock(&mutex);
- if (fp != NULL) {
- fclose(fp);
- fp = NULL;
- }
- pthread_mutex_unlock(&mutex);
-}
-
-/*
- * Enumerate the au_event_ent entries.
- */
-static struct au_event_ent *
-getauevent_r_locked(struct au_event_ent *e)
-{
- char *nl;
-
- if ((fp == NULL) && ((fp = fopen(AUDIT_EVENT_FILE, "r")) == NULL))
- return (NULL);
-
- while (1) {
- if (fgets(linestr, AU_LINE_MAX, fp) == NULL)
- return (NULL);
-
- /* Remove new lines. */
- if ((nl = strrchr(linestr, '\n')) != NULL)
- *nl = '\0';
-
- /* Skip comments. */
- if (linestr[0] == '#')
- continue;
-
- /* Get the next event structure. */
- if (eventfromstr(linestr, e) == NULL)
- return (NULL);
- break;
- }
-
- return (e);
-}
-
-struct au_event_ent *
-getauevent_r(struct au_event_ent *e)
-{
- struct au_event_ent *ep;
-
- pthread_mutex_lock(&mutex);
- ep = getauevent_r_locked(e);
- pthread_mutex_unlock(&mutex);
- return (ep);
-}
-
-struct au_event_ent *
-getauevent(void)
-{
- static char event_ent_name[AU_EVENT_NAME_MAX];
- static char event_ent_desc[AU_EVENT_DESC_MAX];
- static struct au_event_ent e;
-
- bzero(&e, sizeof(e));
- bzero(event_ent_name, sizeof(event_ent_name));
- bzero(event_ent_desc, sizeof(event_ent_desc));
- e.ae_name = event_ent_name;
- e.ae_desc = event_ent_desc;
- return (getauevent_r(&e));
-}
-
-/*
- * Search for an audit event structure having the given event name.
- *
- * XXXRW: Why accept NULL name?
- */
-static struct au_event_ent *
-getauevnam_r_locked(struct au_event_ent *e, const char *name)
-{
- char *nl;
-
- if (name == NULL)
- return (NULL);
-
- /* Rewind to beginning of the file. */
- setauevent_locked();
-
- if ((fp == NULL) && ((fp = fopen(AUDIT_EVENT_FILE, "r")) == NULL))
- return (NULL);
-
- while (fgets(linestr, AU_LINE_MAX, fp) != NULL) {
- /* Remove new lines. */
- if ((nl = strrchr(linestr, '\n')) != NULL)
- *nl = '\0';
-
- if (eventfromstr(linestr, e) != NULL) {
- if (strcmp(name, e->ae_name) == 0)
- return (e);
- }
- }
-
- return (NULL);
-}
-
-struct au_event_ent *
-getauevnam_r(struct au_event_ent *e, const char *name)
-{
- struct au_event_ent *ep;
-
- pthread_mutex_lock(&mutex);
- ep = getauevnam_r_locked(e, name);
- pthread_mutex_unlock(&mutex);
- return (ep);
-}
-
-struct au_event_ent *
-getauevnam(const char *name)
-{
- static char event_ent_name[AU_EVENT_NAME_MAX];
- static char event_ent_desc[AU_EVENT_DESC_MAX];
- static struct au_event_ent e;
-
- bzero(&e, sizeof(e));
- bzero(event_ent_name, sizeof(event_ent_name));
- bzero(event_ent_desc, sizeof(event_ent_desc));
- e.ae_name = event_ent_name;
- e.ae_desc = event_ent_desc;
- return (getauevnam_r(&e, name));
-}
-
-/*
- * Search for an audit event structure having the given event number.
- */
-static struct au_event_ent *
-getauevnum_r_locked(struct au_event_ent *e, au_event_t event_number)
-{
- char *nl;
-
- /* Rewind to beginning of the file. */
- setauevent_locked();
-
- if ((fp == NULL) && ((fp = fopen(AUDIT_EVENT_FILE, "r")) == NULL))
- return (NULL);
-
- while (fgets(linestr, AU_LINE_MAX, fp) != NULL) {
- /* Remove new lines. */
- if ((nl = strrchr(linestr, '\n')) != NULL)
- *nl = '\0';
-
- if (eventfromstr(linestr, e) != NULL) {
- if (event_number == e->ae_number)
- return (e);
- }
- }
-
- return (NULL);
-}
-
-struct au_event_ent *
-getauevnum_r(struct au_event_ent *e, au_event_t event_number)
-{
- struct au_event_ent *ep;
-
- pthread_mutex_lock(&mutex);
- ep = getauevnum_r_locked(e, event_number);
- pthread_mutex_unlock(&mutex);
- return (ep);
-}
-
-struct au_event_ent *
-getauevnum(au_event_t event_number)
-{
- static char event_ent_name[AU_EVENT_NAME_MAX];
- static char event_ent_desc[AU_EVENT_DESC_MAX];
- static struct au_event_ent e;
-
- bzero(&e, sizeof(e));
- bzero(event_ent_name, sizeof(event_ent_name));
- bzero(event_ent_desc, sizeof(event_ent_desc));
- e.ae_name = event_ent_name;
- e.ae_desc = event_ent_desc;
- return (getauevnum_r(&e, event_number));
-}
-
-/*
- * Search for an audit_event entry with a given event_name and returns the
- * corresponding event number.
- */
-au_event_t *
-getauevnonam_r(au_event_t *ev, const char *event_name)
-{
- static char event_ent_name[AU_EVENT_NAME_MAX];
- static char event_ent_desc[AU_EVENT_DESC_MAX];
- static struct au_event_ent e, *ep;
-
- bzero(event_ent_name, sizeof(event_ent_name));
- bzero(event_ent_desc, sizeof(event_ent_desc));
- bzero(&e, sizeof(e));
- e.ae_name = event_ent_name;
- e.ae_desc = event_ent_desc;
-
- ep = getauevnam_r(&e, event_name);
- if (ep == NULL)
- return (NULL);
-
- *ev = e.ae_number;
- return (ev);
-}
-
-au_event_t *
-getauevnonam(const char *event_name)
-{
- static au_event_t event;
-
- return (getauevnonam_r(&event, event_name));
-}
Copied: vendor/openbsm/1.2_alpha4/libbsm/bsm_event.c (from rev 11163, vendor/openbsm/dist/libbsm/bsm_event.c)
===================================================================
--- vendor/openbsm/1.2_alpha4/libbsm/bsm_event.c (rev 0)
+++ vendor/openbsm/1.2_alpha4/libbsm/bsm_event.c 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,361 @@
+/*-
+ * Copyright (c) 2004 Apple Inc.
+ * Copyright (c) 2006 Robert N. M. Watson
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of Apple Inc. ("Apple") nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <config/config.h>
+
+#include <bsm/libbsm.h>
+
+#include <string.h>
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+#include <pthread.h>
+#endif
+#include <stdio.h>
+#include <stdlib.h>
+
+#ifndef HAVE_STRLCPY
+#include <compat/strlcpy.h>
+#endif
+
+
+/*
+ * Parse the contents of the audit_event file to return
+ * au_event_ent entries
+ */
+static FILE *fp = NULL;
+static char linestr[AU_LINE_MAX];
+static const char *eventdelim = ":";
+
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+static pthread_mutex_t mutex = PTHREAD_MUTEX_INITIALIZER;
+#endif
+
+/*
+ * Parse one line from the audit_event file into the au_event_ent structure.
+ */
+static struct au_event_ent *
+eventfromstr(char *str, struct au_event_ent *e)
+{
+ char *evno, *evname, *evdesc, *evclass;
+ struct au_mask evmask;
+ char *last;
+
+ evno = strtok_r(str, eventdelim, &last);
+ evname = strtok_r(NULL, eventdelim, &last);
+ evdesc = strtok_r(NULL, eventdelim, &last);
+ evclass = strtok_r(NULL, eventdelim, &last);
+
+ if ((evno == NULL) || (evname == NULL))
+ return (NULL);
+
+ if (strlen(evname) >= AU_EVENT_NAME_MAX)
+ return (NULL);
+
+ strlcpy(e->ae_name, evname, AU_EVENT_NAME_MAX);
+ if (evdesc != NULL) {
+ if (strlen(evdesc) >= AU_EVENT_DESC_MAX)
+ return (NULL);
+ strlcpy(e->ae_desc, evdesc, AU_EVENT_DESC_MAX);
+ } else
+ strlcpy(e->ae_desc, "", AU_EVENT_DESC_MAX);
+
+ e->ae_number = atoi(evno);
+
+ /*
+ * Find out the mask that corresponds to the given list of classes.
+ */
+ if (evclass != NULL) {
+ if (getauditflagsbin(evclass, &evmask) != 0)
+ e->ae_class = 0;
+ else
+ e->ae_class = evmask.am_success;
+ } else
+ e->ae_class = 0;
+
+ return (e);
+}
+
+/*
+ * Rewind the audit_event file.
+ */
+static void
+setauevent_locked(void)
+{
+
+ if (fp != NULL)
+ fseek(fp, 0, SEEK_SET);
+}
+
+void
+setauevent(void)
+{
+
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+ pthread_mutex_lock(&mutex);
+#endif
+ setauevent_locked();
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+ pthread_mutex_unlock(&mutex);
+#endif
+}
+
+/*
+ * Close the open file pointers.
+ */
+void
+endauevent(void)
+{
+
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+ pthread_mutex_lock(&mutex);
+#endif
+ if (fp != NULL) {
+ fclose(fp);
+ fp = NULL;
+ }
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+ pthread_mutex_unlock(&mutex);
+#endif
+}
+
+/*
+ * Enumerate the au_event_ent entries.
+ */
+static struct au_event_ent *
+getauevent_r_locked(struct au_event_ent *e)
+{
+ char *nl;
+
+ if ((fp == NULL) && ((fp = fopen(AUDIT_EVENT_FILE, "r")) == NULL))
+ return (NULL);
+
+ while (1) {
+ if (fgets(linestr, AU_LINE_MAX, fp) == NULL)
+ return (NULL);
+
+ /* Remove new lines. */
+ if ((nl = strrchr(linestr, '\n')) != NULL)
+ *nl = '\0';
+
+ /* Skip comments. */
+ if (linestr[0] == '#')
+ continue;
+
+ /* Get the next event structure. */
+ if (eventfromstr(linestr, e) == NULL)
+ return (NULL);
+ break;
+ }
+
+ return (e);
+}
+
+struct au_event_ent *
+getauevent_r(struct au_event_ent *e)
+{
+ struct au_event_ent *ep;
+
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+ pthread_mutex_lock(&mutex);
+#endif
+ ep = getauevent_r_locked(e);
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+ pthread_mutex_unlock(&mutex);
+#endif
+ return (ep);
+}
+
+struct au_event_ent *
+getauevent(void)
+{
+ static char event_ent_name[AU_EVENT_NAME_MAX];
+ static char event_ent_desc[AU_EVENT_DESC_MAX];
+ static struct au_event_ent e;
+
+ bzero(&e, sizeof(e));
+ bzero(event_ent_name, sizeof(event_ent_name));
+ bzero(event_ent_desc, sizeof(event_ent_desc));
+ e.ae_name = event_ent_name;
+ e.ae_desc = event_ent_desc;
+ return (getauevent_r(&e));
+}
+
+/*
+ * Search for an audit event structure having the given event name.
+ *
+ * XXXRW: Why accept NULL name?
+ */
+static struct au_event_ent *
+getauevnam_r_locked(struct au_event_ent *e, const char *name)
+{
+ char *nl;
+
+ if (name == NULL)
+ return (NULL);
+
+ /* Rewind to beginning of the file. */
+ setauevent_locked();
+
+ if ((fp == NULL) && ((fp = fopen(AUDIT_EVENT_FILE, "r")) == NULL))
+ return (NULL);
+
+ while (fgets(linestr, AU_LINE_MAX, fp) != NULL) {
+ /* Remove new lines. */
+ if ((nl = strrchr(linestr, '\n')) != NULL)
+ *nl = '\0';
+
+ if (eventfromstr(linestr, e) != NULL) {
+ if (strcmp(name, e->ae_name) == 0)
+ return (e);
+ }
+ }
+
+ return (NULL);
+}
+
+struct au_event_ent *
+getauevnam_r(struct au_event_ent *e, const char *name)
+{
+ struct au_event_ent *ep;
+
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+ pthread_mutex_lock(&mutex);
+#endif
+ ep = getauevnam_r_locked(e, name);
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+ pthread_mutex_unlock(&mutex);
+#endif
+ return (ep);
+}
+
+struct au_event_ent *
+getauevnam(const char *name)
+{
+ static char event_ent_name[AU_EVENT_NAME_MAX];
+ static char event_ent_desc[AU_EVENT_DESC_MAX];
+ static struct au_event_ent e;
+
+ bzero(&e, sizeof(e));
+ bzero(event_ent_name, sizeof(event_ent_name));
+ bzero(event_ent_desc, sizeof(event_ent_desc));
+ e.ae_name = event_ent_name;
+ e.ae_desc = event_ent_desc;
+ return (getauevnam_r(&e, name));
+}
+
+/*
+ * Search for an audit event structure having the given event number.
+ */
+static struct au_event_ent *
+getauevnum_r_locked(struct au_event_ent *e, au_event_t event_number)
+{
+ char *nl;
+
+ /* Rewind to beginning of the file. */
+ setauevent_locked();
+
+ if ((fp == NULL) && ((fp = fopen(AUDIT_EVENT_FILE, "r")) == NULL))
+ return (NULL);
+
+ while (fgets(linestr, AU_LINE_MAX, fp) != NULL) {
+ /* Remove new lines. */
+ if ((nl = strrchr(linestr, '\n')) != NULL)
+ *nl = '\0';
+
+ if (eventfromstr(linestr, e) != NULL) {
+ if (event_number == e->ae_number)
+ return (e);
+ }
+ }
+
+ return (NULL);
+}
+
+struct au_event_ent *
+getauevnum_r(struct au_event_ent *e, au_event_t event_number)
+{
+ struct au_event_ent *ep;
+
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+ pthread_mutex_lock(&mutex);
+#endif
+ ep = getauevnum_r_locked(e, event_number);
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+ pthread_mutex_unlock(&mutex);
+#endif
+ return (ep);
+}
+
+struct au_event_ent *
+getauevnum(au_event_t event_number)
+{
+ static char event_ent_name[AU_EVENT_NAME_MAX];
+ static char event_ent_desc[AU_EVENT_DESC_MAX];
+ static struct au_event_ent e;
+
+ bzero(&e, sizeof(e));
+ bzero(event_ent_name, sizeof(event_ent_name));
+ bzero(event_ent_desc, sizeof(event_ent_desc));
+ e.ae_name = event_ent_name;
+ e.ae_desc = event_ent_desc;
+ return (getauevnum_r(&e, event_number));
+}
+
+/*
+ * Search for an audit_event entry with a given event_name and returns the
+ * corresponding event number.
+ */
+au_event_t *
+getauevnonam_r(au_event_t *ev, const char *event_name)
+{
+ static char event_ent_name[AU_EVENT_NAME_MAX];
+ static char event_ent_desc[AU_EVENT_DESC_MAX];
+ static struct au_event_ent e, *ep;
+
+ bzero(event_ent_name, sizeof(event_ent_name));
+ bzero(event_ent_desc, sizeof(event_ent_desc));
+ bzero(&e, sizeof(e));
+ e.ae_name = event_ent_name;
+ e.ae_desc = event_ent_desc;
+
+ ep = getauevnam_r(&e, event_name);
+ if (ep == NULL)
+ return (NULL);
+
+ *ev = e.ae_number;
+ return (ev);
+}
+
+au_event_t *
+getauevnonam(const char *event_name)
+{
+ static au_event_t event;
+
+ return (getauevnonam_r(&event, event_name));
+}
Copied: vendor/openbsm/1.2_alpha4/libbsm/bsm_fcntl.c (from rev 11163, vendor/openbsm/dist/libbsm/bsm_fcntl.c)
===================================================================
--- vendor/openbsm/1.2_alpha4/libbsm/bsm_fcntl.c (rev 0)
+++ vendor/openbsm/1.2_alpha4/libbsm/bsm_fcntl.c 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,287 @@
+/*-
+ * Copyright (c) 2008-2009 Apple Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of Apple Inc. ("Apple") nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <sys/param.h>
+#include <sys/fcntl.h>
+
+#include <config/config.h>
+
+#include <bsm/audit_fcntl.h>
+#include <bsm/libbsm.h>
+
+struct bsm_fcntl_cmd {
+ u_short bfc_bsm_fcntl_cmd;
+ int bfc_local_fcntl_cmd;
+};
+typedef struct bsm_fcntl_cmd bsm_fcntl_cmd_t;
+
+static const bsm_fcntl_cmd_t bsm_fcntl_cmdtab[] = {
+ { BSM_F_DUPFD, F_DUPFD },
+ { BSM_F_GETFD, F_GETFD },
+ { BSM_F_SETFD, F_SETFD },
+ { BSM_F_GETFL, F_GETFL },
+ { BSM_F_SETFL, F_SETFL },
+#ifdef F_O_GETLK
+ { BSM_F_O_GETLK, F_O_GETLK },
+#endif
+ { BSM_F_SETLK, F_SETLK },
+ { BSM_F_SETLKW, F_SETLK },
+#ifdef F_CHFL
+ { BSM_F_CHKFL, F_CHKFL },
+#endif
+#ifdef F_DUP2FD
+ { BSM_F_DUP2FD, F_DUP2FD },
+#endif
+#ifdef F_ALLOCSP
+ { BSM_F_ALLOCSP, F_ALLOCSP },
+#endif
+#ifdef F_FREESP
+ { BSM_F_FREESP, F_FREESP },
+#endif
+#ifdef F_ISSTREAM
+ { BSM_F_ISSTREAM, F_ISSTREAM},
+#endif
+ { BSM_F_GETLK, F_GETLK },
+#ifdef F_PRIV
+ { BSM_F_PRIV, F_PRIV },
+#endif
+#ifdef F_NPRIV
+ { BSM_F_NPRIV, F_NPRIV },
+#endif
+#ifdef F_QUOTACTL
+ { BSM_F_QUOTACTL, F_QUOTACTL },
+#endif
+#ifdef F_BLOCKS
+ { BSM_F_BLOCKS, F_BLOCKS },
+#endif
+#ifdef F_BLKSIZE
+ { BSM_F_BLKSIZE, F_BLKSIZE },
+#endif
+ { BSM_F_GETOWN, F_GETOWN },
+ { BSM_F_SETOWN, F_SETOWN },
+#ifdef F_REVOKE
+ { BSM_F_REVOKE, F_REVOKE },
+#endif
+#ifdef F_HASREMOTEBLOCKS
+ { BSM_F_HASREMOTEBLOCKS,
+ F_HASREMOTEBLOCKS },
+#endif
+#ifdef F_FREESP
+ { BSM_F_FREESP, F_FREESP },
+#endif
+#ifdef F_ALLOCSP
+ { BSM_F_ALLOCSP, F_ALLOCSP },
+#endif
+#ifdef F_FREESP64
+ { BSM_F_FREESP64, F_FREESP64 },
+#endif
+#ifdef F_ALLOCSP64
+ { BSM_F_ALLOCSP64, F_ALLOCSP64 },
+#endif
+#ifdef F_GETLK64
+ { BSM_F_GETLK64, F_GETLK64 },
+#endif
+#ifdef F_SETLK64
+ { BSM_F_SETLK64, F_SETLK64 },
+#endif
+#ifdef F_SETLKW64
+ { BSM_F_SETLKW64, F_SETLKW64 },
+#endif
+#ifdef F_SHARE
+ { BSM_F_SHARE, F_SHARE },
+#endif
+#ifdef F_UNSHARE
+ { BSM_F_UNSHARE, F_UNSHARE },
+#endif
+#ifdef F_SETLK_NBMAND
+ { BSM_F_SETLK_NBMAND, F_SETLK_NBMAND },
+#endif
+#ifdef F_SHARE_NBMAND
+ { BSM_F_SHARE_NBMAND, F_SHARE_NBMAND },
+#endif
+#ifdef F_SETLK64_NBMAND
+ { BSM_F_SETLK64_NBMAND, F_SETLK64_NBMAND },
+#endif
+#ifdef F_GETXFL
+ { BSM_F_GETXFL, F_GETXFL },
+#endif
+#ifdef F_BADFD
+ { BSM_F_BADFD, F_BADFD },
+#endif
+#ifdef F_OGETLK
+ { BSM_F_OGETLK, F_OGETLK },
+#endif
+#ifdef F_OSETLK
+ { BSM_F_OSETLK, F_OSETLK },
+#endif
+#ifdef F_OSETLKW
+ { BSM_F_OSETLKW, F_OSETLKW },
+#endif
+#ifdef F_SETLK_REMOTE
+ { BSM_F_SETLK_REMOTE, F_SETLK_REMOTE },
+#endif
+
+#ifdef F_SETSIG
+ { BSM_F_SETSIG, F_SETSIG },
+#endif
+#ifdef F_GETSIG
+ { BSM_F_GETSIG, F_GETSIG },
+#endif
+
+#ifdef F_CHKCLEAN
+ { BSM_F_CHKCLEAN, F_CHKCLEAN },
+#endif
+#ifdef F_PREALLOCATE
+ { BSM_F_PREALLOCATE, F_PREALLOCATE },
+#endif
+#ifdef F_SETSIZE
+ { BSM_F_SETSIZE, F_SETSIZE },
+#endif
+#ifdef F_RDADVISE
+ { BSM_F_RDADVISE, F_RDADVISE },
+#endif
+#ifdef F_RDAHEAD
+ { BSM_F_RDAHEAD, F_RDAHEAD },
+#endif
+#ifdef F_READBOOTSTRAP
+ { BSM_F_READBOOTSTRAP, F_READBOOTSTRAP },
+#endif
+#ifdef F_WRITEBOOTSTRAP
+ { BSM_F_WRITEBOOTSTRAP, F_WRITEBOOTSTRAP },
+#endif
+#ifdef F_NOCACHE
+ { BSM_F_NOCACHE, F_NOCACHE },
+#endif
+#ifdef F_LOG2PHYS
+ { BSM_F_LOG2PHYS, F_LOG2PHYS },
+#endif
+#ifdef F_GETPATH
+ { BSM_F_GETPATH, F_GETPATH },
+#endif
+#ifdef F_FULLFSYNC
+ { BSM_F_FULLFSYNC, F_FULLFSYNC },
+#endif
+#ifdef F_PATHPKG_CHECK
+ { BSM_F_PATHPKG_CHECK, F_PATHPKG_CHECK },
+#endif
+#ifdef F_FREEZE_FS
+ { BSM_F_FREEZE_FS, F_FREEZE_FS },
+#endif
+#ifdef F_THAW_FS
+ { BSM_F_THAW_FS, F_THAW_FS },
+#endif
+#ifdef F_GLOBAL_NOCACHE
+ { BSM_F_GLOBAL_NOCACHE, F_GLOBAL_NOCACHE },
+#endif
+#ifdef F_OPENFROM
+ { BSM_F_OPENFROM, F_OPENFROM },
+#endif
+#ifdef F_UNLINKFROM
+ { BSM_F_UNLINKFROM, F_UNLINKFROM },
+#endif
+#ifdef F_CHECK_OPENEVT
+ { BSM_F_CHECK_OPENEVT, F_CHECK_OPENEVT },
+#endif
+#ifdef F_ADDSIGS
+ { BSM_F_ADDSIGS, F_ADDSIGS },
+#endif
+#ifdef F_MARKDEPENDENCY
+ { BSM_F_MARKDEPENDENCY, F_MARKDEPENDENCY },
+#endif
+
+#ifdef FCNTL_FS_SPECIFIC_BASE
+ { BSM_F_FS_SPECIFIC_0, FCNTL_FS_SPECIFIC_BASE},
+ { BSM_F_FS_SPECIFIC_1, FCNTL_FS_SPECIFIC_BASE + 1},
+ { BSM_F_FS_SPECIFIC_2, FCNTL_FS_SPECIFIC_BASE + 2},
+ { BSM_F_FS_SPECIFIC_3, FCNTL_FS_SPECIFIC_BASE + 3},
+ { BSM_F_FS_SPECIFIC_4, FCNTL_FS_SPECIFIC_BASE + 4},
+ { BSM_F_FS_SPECIFIC_5, FCNTL_FS_SPECIFIC_BASE + 5},
+ { BSM_F_FS_SPECIFIC_6, FCNTL_FS_SPECIFIC_BASE + 6},
+ { BSM_F_FS_SPECIFIC_7, FCNTL_FS_SPECIFIC_BASE + 7},
+ { BSM_F_FS_SPECIFIC_8, FCNTL_FS_SPECIFIC_BASE + 8},
+ { BSM_F_FS_SPECIFIC_9, FCNTL_FS_SPECIFIC_BASE + 9},
+ { BSM_F_FS_SPECIFIC_10, FCNTL_FS_SPECIFIC_BASE + 10},
+ { BSM_F_FS_SPECIFIC_11, FCNTL_FS_SPECIFIC_BASE + 11},
+ { BSM_F_FS_SPECIFIC_12, FCNTL_FS_SPECIFIC_BASE + 12},
+ { BSM_F_FS_SPECIFIC_13, FCNTL_FS_SPECIFIC_BASE + 13},
+ { BSM_F_FS_SPECIFIC_14, FCNTL_FS_SPECIFIC_BASE + 14},
+ { BSM_F_FS_SPECIFIC_15, FCNTL_FS_SPECIFIC_BASE + 15},
+#endif /* FCNTL_FS_SPECIFIC_BASE */
+};
+static const int bsm_fcntl_cmd_count = sizeof(bsm_fcntl_cmdtab) /
+ sizeof(bsm_fcntl_cmdtab[0]);
+
+static const bsm_fcntl_cmd_t *
+bsm_lookup_local_fcntl_cmd(int local_fcntl_cmd)
+{
+ int i;
+
+ for (i = 0; i < bsm_fcntl_cmd_count; i++) {
+ if (bsm_fcntl_cmdtab[i].bfc_local_fcntl_cmd ==
+ local_fcntl_cmd)
+ return (&bsm_fcntl_cmdtab[i]);
+ }
+ return (NULL);
+}
+
+u_short
+au_fcntl_cmd_to_bsm(int local_fcntl_cmd)
+{
+ const bsm_fcntl_cmd_t *bfcp;
+
+ bfcp = bsm_lookup_local_fcntl_cmd(local_fcntl_cmd);
+ if (bfcp == NULL)
+ return (BSM_F_UNKNOWN);
+ return (bfcp->bfc_bsm_fcntl_cmd);
+}
+
+static const bsm_fcntl_cmd_t *
+bsm_lookup_bsm_fcntl_cmd(u_short bsm_fcntl_cmd)
+{
+ int i;
+
+ for (i = 0; i < bsm_fcntl_cmd_count; i++) {
+ if (bsm_fcntl_cmdtab[i].bfc_bsm_fcntl_cmd ==
+ bsm_fcntl_cmd)
+ return (&bsm_fcntl_cmdtab[i]);
+ }
+ return (NULL);
+}
+
+int
+au_bsm_to_fcntl_cmd(u_short bsm_fcntl_cmd, int *local_fcntl_cmdp)
+{
+ const bsm_fcntl_cmd_t *bfcp;
+
+ bfcp = bsm_lookup_bsm_fcntl_cmd(bsm_fcntl_cmd);
+ if (bfcp == NULL || bfcp->bfc_local_fcntl_cmd)
+ return (-1);
+ *local_fcntl_cmdp = bfcp->bfc_local_fcntl_cmd;
+ return (0);
+}
Deleted: vendor/openbsm/1.2_alpha4/libbsm/bsm_flags.c
===================================================================
--- vendor/openbsm/dist/libbsm/bsm_flags.c 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/libbsm/bsm_flags.c 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,176 +0,0 @@
-/*
- * Copyright (c) 2004 Apple Computer, Inc.
- * Copyright (c) 2006 Robert N. M. Watson
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. Neither the name of Apple Computer, Inc. ("Apple") nor the names of
- * its contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR
- * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
- * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- * $P4: //depot/projects/trustedbsd/openbsm/libbsm/bsm_flags.c#13 $
- */
-
-#include <bsm/libbsm.h>
-
-#include <errno.h>
-#include <stdio.h>
-#include <string.h>
-
-static const char *flagdelim = ",";
-
-/*
- * Convert the character representation of audit values into the au_mask_t
- * field.
- */
-int
-getauditflagsbin(char *auditstr, au_mask_t *masks)
-{
- char class_ent_name[AU_CLASS_NAME_MAX];
- char class_ent_desc[AU_CLASS_DESC_MAX];
- struct au_class_ent c;
- char *tok;
- char sel, sub;
- char *last;
-
- bzero(&c, sizeof(c));
- bzero(class_ent_name, sizeof(class_ent_name));
- bzero(class_ent_desc, sizeof(class_ent_desc));
- c.ac_name = class_ent_name;
- c.ac_desc = class_ent_desc;
-
- masks->am_success = 0;
- masks->am_failure = 0;
-
- tok = strtok_r(auditstr, flagdelim, &last);
- while (tok != NULL) {
- /* Check for the events that should not be audited. */
- if (tok[0] == '^') {
- sub = 1;
- tok++;
- } else
- sub = 0;
-
- /* Check for the events to be audited for success. */
- if (tok[0] == '+') {
- sel = AU_PRS_SUCCESS;
- tok++;
- } else if (tok[0] == '-') {
- sel = AU_PRS_FAILURE;
- tok++;
- } else
- sel = AU_PRS_BOTH;
-
- if ((getauclassnam_r(&c, tok)) != NULL) {
- if (sub)
- SUB_FROM_MASK(masks, c.ac_class, sel);
- else
- ADD_TO_MASK(masks, c.ac_class, sel);
- } else {
- errno = EINVAL;
- return (-1);
- }
-
- /* Get the next class. */
- tok = strtok_r(NULL, flagdelim, &last);
- }
- return (0);
-}
-
-/*
- * Convert the au_mask_t fields into a string value. If verbose is non-zero
- * the long flag names are used else the short (2-character)flag names are
- * used.
- *
- * XXXRW: If bits are specified that are not matched by any class, they are
- * omitted rather than rejected with EINVAL.
- *
- * XXXRW: This is not thread-safe as it relies on atomicity between
- * setauclass() and sequential calls to getauclassent(). This could be
- * fixed by iterating through the bitmask fields rather than iterating
- * through the classes.
- */
-int
-getauditflagschar(char *auditstr, au_mask_t *masks, int verbose)
-{
- char class_ent_name[AU_CLASS_NAME_MAX];
- char class_ent_desc[AU_CLASS_DESC_MAX];
- struct au_class_ent c;
- char *strptr = auditstr;
- u_char sel;
-
- bzero(&c, sizeof(c));
- bzero(class_ent_name, sizeof(class_ent_name));
- bzero(class_ent_desc, sizeof(class_ent_desc));
- c.ac_name = class_ent_name;
- c.ac_desc = class_ent_desc;
-
- /*
- * Enumerate the class entries, check if each is selected in either
- * the success or failure masks.
- */
- setauclass();
- while ((getauclassent_r(&c)) != NULL) {
- sel = 0;
-
- /* Dont do anything for class = no. */
- if (c.ac_class == 0)
- continue;
-
- sel |= ((c.ac_class & masks->am_success) == c.ac_class) ?
- AU_PRS_SUCCESS : 0;
- sel |= ((c.ac_class & masks->am_failure) == c.ac_class) ?
- AU_PRS_FAILURE : 0;
-
- /*
- * No prefix should be attached if both success and failure
- * are selected.
- */
- if ((sel & AU_PRS_BOTH) == 0) {
- if ((sel & AU_PRS_SUCCESS) != 0) {
- *strptr = '+';
- strptr = strptr + 1;
- } else if ((sel & AU_PRS_FAILURE) != 0) {
- *strptr = '-';
- strptr = strptr + 1;
- }
- }
-
- if (sel != 0) {
- if (verbose) {
- strcpy(strptr, c.ac_desc);
- strptr += strlen(c.ac_desc);
- } else {
- strcpy(strptr, c.ac_name);
- strptr += strlen(c.ac_name);
- }
- *strptr = ','; /* delimiter */
- strptr = strptr + 1;
- }
- }
-
- /* Overwrite the last delimiter with the string terminator. */
- if (strptr != auditstr)
- *(strptr-1) = '\0';
-
- return (0);
-}
Copied: vendor/openbsm/1.2_alpha4/libbsm/bsm_flags.c (from rev 11163, vendor/openbsm/dist/libbsm/bsm_flags.c)
===================================================================
--- vendor/openbsm/1.2_alpha4/libbsm/bsm_flags.c (rev 0)
+++ vendor/openbsm/1.2_alpha4/libbsm/bsm_flags.c 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,180 @@
+/*-
+ * Copyright (c) 2004 Apple Inc.
+ * Copyright (c) 2006 Robert N. M. Watson
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of Apple Inc. ("Apple") nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <config/config.h>
+
+#include <bsm/libbsm.h>
+
+#include <errno.h>
+#include <stdio.h>
+#include <string.h>
+
+#ifndef HAVE_STRLCPY
+#include <compat/strlcpy.h>
+#endif
+
+static const char *flagdelim = ",";
+
+/*
+ * Convert the character representation of audit values into the au_mask_t
+ * field.
+ */
+int
+getauditflagsbin(char *auditstr, au_mask_t *masks)
+{
+ char class_ent_name[AU_CLASS_NAME_MAX];
+ char class_ent_desc[AU_CLASS_DESC_MAX];
+ struct au_class_ent c;
+ char *tok;
+ char sel, sub;
+ char *last;
+
+ bzero(&c, sizeof(c));
+ bzero(class_ent_name, sizeof(class_ent_name));
+ bzero(class_ent_desc, sizeof(class_ent_desc));
+ c.ac_name = class_ent_name;
+ c.ac_desc = class_ent_desc;
+
+ masks->am_success = 0;
+ masks->am_failure = 0;
+
+ tok = strtok_r(auditstr, flagdelim, &last);
+ while (tok != NULL) {
+ /* Check for the events that should not be audited. */
+ if (tok[0] == '^') {
+ sub = 1;
+ tok++;
+ } else
+ sub = 0;
+
+ /* Check for the events to be audited for success. */
+ if (tok[0] == '+') {
+ sel = AU_PRS_SUCCESS;
+ tok++;
+ } else if (tok[0] == '-') {
+ sel = AU_PRS_FAILURE;
+ tok++;
+ } else
+ sel = AU_PRS_BOTH;
+
+ if ((getauclassnam_r(&c, tok)) != NULL) {
+ if (sub)
+ SUB_FROM_MASK(masks, c.ac_class, sel);
+ else
+ ADD_TO_MASK(masks, c.ac_class, sel);
+ } else {
+ errno = EINVAL;
+ return (-1);
+ }
+
+ /* Get the next class. */
+ tok = strtok_r(NULL, flagdelim, &last);
+ }
+ return (0);
+}
+
+/*
+ * Convert the au_mask_t fields into a string value. If verbose is non-zero
+ * the long flag names are used else the short (2-character)flag names are
+ * used.
+ *
+ * XXXRW: If bits are specified that are not matched by any class, they are
+ * omitted rather than rejected with EINVAL.
+ *
+ * XXXRW: This is not thread-safe as it relies on atomicity between
+ * setauclass() and sequential calls to getauclassent(). This could be
+ * fixed by iterating through the bitmask fields rather than iterating
+ * through the classes.
+ */
+int
+getauditflagschar(char *auditstr, au_mask_t *masks, int verbose)
+{
+ char class_ent_name[AU_CLASS_NAME_MAX];
+ char class_ent_desc[AU_CLASS_DESC_MAX];
+ struct au_class_ent c;
+ char *strptr = auditstr;
+ u_char sel;
+
+ bzero(&c, sizeof(c));
+ bzero(class_ent_name, sizeof(class_ent_name));
+ bzero(class_ent_desc, sizeof(class_ent_desc));
+ c.ac_name = class_ent_name;
+ c.ac_desc = class_ent_desc;
+
+ /*
+ * Enumerate the class entries, check if each is selected in either
+ * the success or failure masks.
+ */
+ setauclass();
+ while ((getauclassent_r(&c)) != NULL) {
+ sel = 0;
+
+ /* Dont do anything for class = no. */
+ if (c.ac_class == 0)
+ continue;
+
+ sel |= ((c.ac_class & masks->am_success) == c.ac_class) ?
+ AU_PRS_SUCCESS : 0;
+ sel |= ((c.ac_class & masks->am_failure) == c.ac_class) ?
+ AU_PRS_FAILURE : 0;
+
+ /*
+ * No prefix should be attached if both success and failure
+ * are selected.
+ */
+ if ((sel & AU_PRS_BOTH) == 0) {
+ if ((sel & AU_PRS_SUCCESS) != 0) {
+ *strptr = '+';
+ strptr = strptr + 1;
+ } else if ((sel & AU_PRS_FAILURE) != 0) {
+ *strptr = '-';
+ strptr = strptr + 1;
+ }
+ }
+
+ if (sel != 0) {
+ if (verbose) {
+ strlcpy(strptr, c.ac_desc, AU_CLASS_DESC_MAX);
+ strptr += strlen(c.ac_desc);
+ } else {
+ strlcpy(strptr, c.ac_name, AU_CLASS_NAME_MAX);
+ strptr += strlen(c.ac_name);
+ }
+ *strptr = ','; /* delimiter */
+ strptr = strptr + 1;
+ }
+ }
+
+ /* Overwrite the last delimiter with the string terminator. */
+ if (strptr != auditstr)
+ *(strptr-1) = '\0';
+
+ return (0);
+}
Deleted: vendor/openbsm/1.2_alpha4/libbsm/bsm_io.c
===================================================================
--- vendor/openbsm/dist/libbsm/bsm_io.c 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/libbsm/bsm_io.c 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,4513 +0,0 @@
-/*
- * Copyright (c) 2004 Apple Computer, Inc.
- * Copyright (c) 2005 SPARTA, Inc.
- * Copyright (c) 2006 Robert N. M. Watson
- * Copyright (c) 2006 Martin Voros
- * All rights reserved.
- *
- * This code was developed in part by Robert N. M. Watson, Senior Principal
- * Scientist, SPARTA, Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. Neither the name of Apple Computer, Inc. ("Apple") nor the names of
- * its contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR
- * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
- * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- * $P4: //depot/projects/trustedbsd/openbsm/libbsm/bsm_io.c#50 $
- */
-
-#include <sys/types.h>
-
-#include <config/config.h>
-#ifdef HAVE_SYS_ENDIAN_H
-#include <sys/endian.h>
-#else /* !HAVE_SYS_ENDIAN_H */
-#ifdef HAVE_MACHINE_ENDIAN_H
-#include <machine/endian.h>
-#else /* !HAVE_MACHINE_ENDIAN_H */
-#ifdef HAVE_ENDIAN_H
-#include <endian.h>
-#else /* !HAVE_ENDIAN_H */
-#error "No supported endian.h"
-#endif /* !HAVE_ENDIAN_H */
-#endif /* !HAVE_MACHINE_ENDIAN_H */
-#include <compat/endian.h>
-#endif /* !HAVE_SYS_ENDIAN_H */
-#ifdef HAVE_FULL_QUEUE_H
-#include <sys/queue.h>
-#else /* !HAVE_FULL_QUEUE_H */
-#include <compat/queue.h>
-#endif /* !HAVE_FULL_QUEUE_H */
-
-#include <sys/stat.h>
-#include <sys/socket.h>
-
-#include <bsm/libbsm.h>
-
-#include <unistd.h>
-#include <netinet/in.h>
-#include <arpa/inet.h>
-#include <errno.h>
-#include <time.h>
-#include <stdlib.h>
-#include <stdio.h>
-#include <string.h>
-#include <pwd.h>
-#include <grp.h>
-
-#include <bsm/audit_internal.h>
-
-#define READ_TOKEN_BYTES(buf, len, dest, size, bytesread, err) do { \
- if (bytesread + size > len) { \
- err = 1; \
- } else { \
- memcpy(dest, buf + bytesread, size); \
- bytesread += size; \
- } \
-} while (0)
-
-#define READ_TOKEN_U_CHAR(buf, len, dest, bytesread, err) do { \
- if (bytesread + sizeof(u_char) <= len) { \
- dest = buf[bytesread]; \
- bytesread += sizeof(u_char); \
- } else \
- err = 1; \
-} while (0)
-
-#define READ_TOKEN_U_INT16(buf, len, dest, bytesread, err) do { \
- if (bytesread + sizeof(u_int16_t) <= len) { \
- dest = be16dec(buf + bytesread); \
- bytesread += sizeof(u_int16_t); \
- } else \
- err = 1; \
-} while (0)
-
-#define READ_TOKEN_U_INT32(buf, len, dest, bytesread, err) do { \
- if (bytesread + sizeof(u_int32_t) <= len) { \
- dest = be32dec(buf + bytesread); \
- bytesread += sizeof(u_int32_t); \
- } else \
- err = 1; \
-} while (0)
-
-#define READ_TOKEN_U_INT64(buf, len, dest, bytesread, err) do { \
- if (bytesread + sizeof(u_int64_t) <= len) { \
- dest = be64dec(buf + bytesread); \
- bytesread += sizeof(u_int64_t); \
- } else \
- err = 1; \
-} while (0)
-
-#define SET_PTR(buf, len, ptr, size, bytesread, err) do { \
- if ((bytesread) + (size) > (len)) \
- (err) = 1; \
- else { \
- (ptr) = (buf) + (bytesread); \
- (bytesread) += (size); \
- } \
-} while (0)
-
-/*
- * XML option.
- */
-#define AU_PLAIN 0
-#define AU_XML 1
-
-/*
- * Prints the delimiter string.
- */
-static void
-print_delim(FILE *fp, const char *del)
-{
-
- fprintf(fp, "%s", del);
-}
-
-/*
- * Prints a single byte in the given format.
- */
-static void
-print_1_byte(FILE *fp, u_char val, const char *format)
-{
-
- fprintf(fp, format, val);
-}
-
-/*
- * Print 2 bytes in the given format.
- */
-static void
-print_2_bytes(FILE *fp, u_int16_t val, const char *format)
-{
-
- fprintf(fp, format, val);
-}
-
-/*
- * Prints 4 bytes in the given format.
- */
-static void
-print_4_bytes(FILE *fp, u_int32_t val, const char *format)
-{
-
- fprintf(fp, format, val);
-}
-
-/*
- * Prints 8 bytes in the given format.
- */
-static void
-print_8_bytes(FILE *fp, u_int64_t val, const char *format)
-{
-
- fprintf(fp, format, val);
-}
-
-/*
- * Prints the given size of data bytes in hex.
- */
-static void
-print_mem(FILE *fp, u_char *data, size_t len)
-{
- int i;
-
- if (len > 0) {
- fprintf(fp, "0x");
- for (i = 0; i < len; i++)
- fprintf(fp, "%x", data[i]);
- }
-}
-
-/*
- * Prints the given data bytes as a string.
- */
-static void
-print_string(FILE *fp, const char *str, size_t len)
-{
- int i;
-
- if (len > 0) {
- for (i = 0; i < len; i++) {
- if (str[i] != '\0')
- fprintf(fp, "%c", str[i]);
- }
- }
-}
-
-/*
- * Prints the beggining of attribute.
- */
-static void
-open_attr(FILE *fp, const char *str)
-{
-
- fprintf(fp,"%s=\"", str);
-}
-
-/*
- * Prints the end of attribute.
- */
-static void
-close_attr(FILE *fp)
-{
-
- fprintf(fp,"\" ");
-}
-
-/*
- * Prints the end of tag.
- */
-static void
-close_tag(FILE *fp, u_char type)
-{
-
- switch(type) {
- case AUT_HEADER32:
- fprintf(fp, ">");
- break;
-
- case AUT_HEADER32_EX:
- fprintf(fp, ">");
- break;
-
- case AUT_HEADER64:
- fprintf(fp, ">");
- break;
-
- case AUT_HEADER64_EX:
- fprintf(fp, ">");
- break;
-
- case AUT_ARG32:
- fprintf(fp, "/>");
- break;
-
- case AUT_ARG64:
- fprintf(fp, "/>");
- break;
-
- case AUT_ATTR32:
- fprintf(fp, "/>");
- break;
-
- case AUT_ATTR64:
- fprintf(fp, "/>");
- break;
-
- case AUT_EXIT:
- fprintf(fp, "/>");
- break;
-
- case AUT_EXEC_ARGS:
- fprintf(fp, "</exec_args>");
- break;
-
- case AUT_EXEC_ENV:
- fprintf(fp, "</exec_env>");
- break;
-
- case AUT_OTHER_FILE32:
- fprintf(fp, "</file>");
- break;
-
- case AUT_NEWGROUPS:
- fprintf(fp, "</group>");
- break;
-
- case AUT_IN_ADDR:
- fprintf(fp, "</ip_address>");
- break;
-
- case AUT_IN_ADDR_EX:
- fprintf(fp, "</ip_address>");
- break;
-
- case AUT_IP:
- fprintf(fp, "/>");
- break;
-
- case AUT_IPC:
- fprintf(fp, "/>");
- break;
-
- case AUT_IPC_PERM:
- fprintf(fp, "/>");
- break;
-
- case AUT_IPORT:
- fprintf(fp, "</ip_port>");
- break;
-
- case AUT_OPAQUE:
- fprintf(fp, "</opaque>");
- break;
-
- case AUT_PATH:
- fprintf(fp, "</path>");
- break;
-
- case AUT_PROCESS32:
- fprintf(fp, "/>");
- break;
-
- case AUT_PROCESS32_EX:
- fprintf(fp, "/>");
- break;
-
- case AUT_PROCESS64:
- fprintf(fp, "/>");
- break;
-
- case AUT_PROCESS64_EX:
- fprintf(fp, "/>");
- break;
-
- case AUT_RETURN32:
- fprintf(fp, "/>");
- break;
-
- case AUT_RETURN64:
- fprintf(fp, "/>");
- break;
-
- case AUT_SEQ:
- fprintf(fp, "/>");
- break;
-
- case AUT_SOCKET:
- fprintf(fp, "/>");
- break;
-
- case AUT_SOCKINET32:
- fprintf(fp, "/>");
- break;
-
- case AUT_SOCKUNIX:
- fprintf(fp, "/>");
- break;
-
- case AUT_SUBJECT32:
- fprintf(fp, "/>");
- break;
-
- case AUT_SUBJECT64:
- fprintf(fp, "/>");
- break;
-
- case AUT_SUBJECT32_EX:
- fprintf(fp, "/>");
- break;
-
- case AUT_SUBJECT64_EX:
- fprintf(fp, "/>");
- break;
-
- case AUT_TEXT:
- fprintf(fp, "</text>");
- break;
-
- case AUT_SOCKET_EX:
- fprintf(fp, "/>");
- break;
-
- case AUT_DATA:
- fprintf(fp, "</arbitrary>");
- break;
-
- case AUT_ZONENAME:
- fprintf(fp, "/>");
- break;
- }
-}
-
-/*
- * Prints the token type in either the raw or the default form.
- */
-static void
-print_tok_type(FILE *fp, u_char type, const char *tokname, char raw, int xml)
-{
-
- if (xml) {
- switch(type) {
- case AUT_HEADER32:
- fprintf(fp, "<record ");
- break;
-
- case AUT_HEADER32_EX:
- fprintf(fp, "<record ");
- break;
-
- case AUT_HEADER64:
- fprintf(fp, "<record ");
- break;
-
- case AUT_HEADER64_EX:
- fprintf(fp, "<record ");
- break;
-
- case AUT_TRAILER:
- fprintf(fp, "</record>");
- break;
-
- case AUT_ARG32:
- fprintf(fp, "<argument ");
- break;
-
- case AUT_ARG64:
- fprintf(fp, "<argument ");
- break;
-
- case AUT_ATTR32:
- fprintf(fp, "<attribute ");
- break;
-
- case AUT_ATTR64:
- fprintf(fp, "<attribute ");
- break;
-
- case AUT_EXIT:
- fprintf(fp, "<exit ");
- break;
-
- case AUT_EXEC_ARGS:
- fprintf(fp, "<exec_args>");
- break;
-
- case AUT_EXEC_ENV:
- fprintf(fp, "<exec_env>");
- break;
-
- case AUT_OTHER_FILE32:
- fprintf(fp, "<file ");
- break;
-
- case AUT_NEWGROUPS:
- fprintf(fp, "<group>");
- break;
-
- case AUT_IN_ADDR:
- fprintf(fp, "<ip_address>");
- break;
-
- case AUT_IN_ADDR_EX:
- fprintf(fp, "<ip_address>");
- break;
-
- case AUT_IP:
- fprintf(fp, "<ip ");
- break;
-
- case AUT_IPC:
- fprintf(fp, "<IPC");
- break;
-
- case AUT_IPC_PERM:
- fprintf(fp, "<IPC_perm ");
- break;
-
- case AUT_IPORT:
- fprintf(fp, "<ip_port>");
- break;
-
- case AUT_OPAQUE:
- fprintf(fp, "<opaque>");
- break;
-
- case AUT_PATH:
- fprintf(fp, "<path>");
- break;
-
- case AUT_PROCESS32:
- fprintf(fp, "<process ");
- break;
-
- case AUT_PROCESS32_EX:
- fprintf(fp, "<process ");
- break;
-
- case AUT_PROCESS64:
- fprintf(fp, "<process ");
- break;
-
- case AUT_PROCESS64_EX:
- fprintf(fp, "<process ");
- break;
-
- case AUT_RETURN32:
- fprintf(fp, "<return ");
- break;
-
- case AUT_RETURN64:
- fprintf(fp, "<return ");
- break;
-
- case AUT_SEQ:
- fprintf(fp, "<sequence ");
- break;
-
- case AUT_SOCKET:
- fprintf(fp, "<socket ");
- break;
-
- case AUT_SOCKINET32:
- fprintf(fp, "<old_socket");
- break;
-
- case AUT_SOCKUNIX:
- fprintf(fp, "<old_socket");
- break;
-
- case AUT_SUBJECT32:
- fprintf(fp, "<subject ");
- break;
-
- case AUT_SUBJECT64:
- fprintf(fp, "<subject ");
- break;
-
- case AUT_SUBJECT32_EX:
- fprintf(fp, "<subject ");
- break;
-
- case AUT_SUBJECT64_EX:
- fprintf(fp, "<subject ");
- break;
-
- case AUT_TEXT:
- fprintf(fp, "<text>");
- break;
-
- case AUT_SOCKET_EX:
- fprintf(fp, "<socket ");
- break;
-
- case AUT_DATA:
- fprintf(fp, "<arbitrary ");
- break;
-
- case AUT_ZONENAME:
- fprintf(fp, "<zone ");
- break;
- }
- } else {
- if (raw)
- fprintf(fp, "%u", type);
- else
- fprintf(fp, "%s", tokname);
- }
-}
-
-/*
- * Prints a user value.
- */
-static void
-print_user(FILE *fp, u_int32_t usr, char raw)
-{
- struct passwd *pwent;
-
- if (raw)
- fprintf(fp, "%d", usr);
- else {
- pwent = getpwuid(usr);
- if (pwent != NULL)
- fprintf(fp, "%s", pwent->pw_name);
- else
- fprintf(fp, "%d", usr);
- }
-}
-
-/*
- * Prints a group value.
- */
-static void
-print_group(FILE *fp, u_int32_t grp, char raw)
-{
- struct group *grpent;
-
- if (raw)
- fprintf(fp, "%d", grp);
- else {
- grpent = getgrgid(grp);
- if (grpent != NULL)
- fprintf(fp, "%s", grpent->gr_name);
- else
- fprintf(fp, "%d", grp);
- }
-}
-
-/*
- * Prints the event from the header token in either the short, default or raw
- * form.
- */
-static void
-print_event(FILE *fp, u_int16_t ev, char raw, char sfrm)
-{
- char event_ent_name[AU_EVENT_NAME_MAX];
- char event_ent_desc[AU_EVENT_DESC_MAX];
- struct au_event_ent e, *ep;
-
- bzero(&e, sizeof(e));
- bzero(event_ent_name, sizeof(event_ent_name));
- bzero(event_ent_desc, sizeof(event_ent_desc));
- e.ae_name = event_ent_name;
- e.ae_desc = event_ent_desc;
-
- ep = getauevnum_r(&e, ev);
- if (ep == NULL) {
- fprintf(fp, "%u", ev);
- return;
- }
-
- if (raw)
- fprintf(fp, "%u", ev);
- else if (sfrm)
- fprintf(fp, "%s", e.ae_name);
- else
- fprintf(fp, "%s", e.ae_desc);
-}
-
-
-/*
- * Prints the event modifier from the header token in either the default or
- * raw form.
- */
-static void
-print_evmod(FILE *fp, u_int16_t evmod, char raw)
-{
- if (raw)
- fprintf(fp, "%u", evmod);
- else
- fprintf(fp, "%u", evmod);
-}
-
-/*
- * Prints seconds in the ctime format.
- */
-static void
-print_sec32(FILE *fp, u_int32_t sec, char raw)
-{
- time_t timestamp;
- char timestr[26];
-
- if (raw)
- fprintf(fp, "%u", sec);
- else {
- timestamp = (time_t)sec;
- ctime_r(×tamp, timestr);
- timestr[24] = '\0'; /* No new line */
- fprintf(fp, "%s", timestr);
- }
-}
-
-/*
- * XXXRW: 64-bit token streams make use of 64-bit time stamps; since we
- * assume a 32-bit time_t, we simply truncate for now.
- */
-static void
-print_sec64(FILE *fp, u_int64_t sec, char raw)
-{
- time_t timestamp;
- char timestr[26];
-
- if (raw)
- fprintf(fp, "%u", (u_int32_t)sec);
- else {
- timestamp = (time_t)sec;
- ctime_r(×tamp, timestr);
- timestr[24] = '\0'; /* No new line */
- fprintf(fp, "%s", timestr);
- }
-}
-
-/*
- * Prints the excess milliseconds.
- */
-static void
-print_msec32(FILE *fp, u_int32_t msec, char raw)
-{
- if (raw)
- fprintf(fp, "%u", msec);
- else
- fprintf(fp, " + %u msec", msec);
-}
-
-/*
- * XXXRW: 64-bit token streams make use of 64-bit time stamps; since we assume
- * a 32-bit msec, we simply truncate for now.
- */
-static void
-print_msec64(FILE *fp, u_int64_t msec, char raw)
-{
-
- msec &= 0xffffffff;
- if (raw)
- fprintf(fp, "%u", (u_int32_t)msec);
- else
- fprintf(fp, " + %u msec", (u_int32_t)msec);
-}
-
-/*
- * Prints a dotted form for the IP address.
- */
-static void
-print_ip_address(FILE *fp, u_int32_t ip)
-{
- struct in_addr ipaddr;
-
- ipaddr.s_addr = ip;
- fprintf(fp, "%s", inet_ntoa(ipaddr));
-}
-
-/*
- * Prints a string value for the given ip address.
- */
-static void
-print_ip_ex_address(FILE *fp, u_int32_t type, u_int32_t *ipaddr)
-{
- struct in_addr ipv4;
- struct in6_addr ipv6;
- char dst[INET6_ADDRSTRLEN];
-
- switch (type) {
- case AU_IPv4:
- ipv4.s_addr = (in_addr_t)(ipaddr[0]);
- fprintf(fp, "%s", inet_ntop(AF_INET, &ipv4, dst,
- INET6_ADDRSTRLEN));
- break;
-
- case AU_IPv6:
- bcopy(ipaddr, &ipv6, sizeof(ipv6));
- fprintf(fp, "%s", inet_ntop(AF_INET6, &ipv6, dst,
- INET6_ADDRSTRLEN));
- break;
-
- default:
- fprintf(fp, "invalid");
- }
-}
-
-/*
- * Prints return value as success or failure.
- */
-static void
-print_retval(FILE *fp, u_char status, char raw)
-{
- if (raw)
- fprintf(fp, "%u", status);
- else {
- if (status == 0)
- fprintf(fp, "success");
- else
- fprintf(fp, "failure : %s", strerror(status));
- }
-}
-
-/*
- * Prints the exit value.
- */
-static void
-print_errval(FILE *fp, u_int32_t val)
-{
-
- fprintf(fp, "Error %u", val);
-}
-
-/*
- * Prints IPC type.
- */
-static void
-print_ipctype(FILE *fp, u_char type, char raw)
-{
- if (raw)
- fprintf(fp, "%u", type);
- else {
- if (type == AT_IPC_MSG)
- fprintf(fp, "Message IPC");
- else if (type == AT_IPC_SEM)
- fprintf(fp, "Semaphore IPC");
- else if (type == AT_IPC_SHM)
- fprintf(fp, "Shared Memory IPC");
- else
- fprintf(fp, "%u", type);
- }
-}
-
-/*
- * Print XML header.
- */
-void
-au_print_xml_header(FILE *outfp)
-{
-
- fprintf(outfp, "<?xml version='1.0' ?>\n");
- fprintf(outfp, "<audit>\n");
-}
-
-/*
- * Print XML footer.
- */
-void
-au_print_xml_footer(FILE *outfp)
-{
-
- fprintf(outfp, "</audit>\n");
-}
-
-/*
- * record byte count 4 bytes
- * version # 1 byte [2]
- * event type 2 bytes
- * event modifier 2 bytes
- * seconds of time 4 bytes/8 bytes (32-bit/64-bit value)
- * milliseconds of time 4 bytes/8 bytes (32-bit/64-bit value)
- */
-static int
-fetch_header32_tok(tokenstr_t *tok, u_char *buf, int len)
-{
- int err = 0;
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.hdr32.size, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_CHAR(buf, len, tok->tt.hdr32.version, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT16(buf, len, tok->tt.hdr32.e_type, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT16(buf, len, tok->tt.hdr32.e_mod, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.hdr32.s, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.hdr32.ms, tok->len, err);
- if (err)
- return (-1);
-
- return (0);
-}
-
-static void
-print_header32_tok(FILE *fp, tokenstr_t *tok, char *del, char raw, char sfrm,
- int xml)
-{
-
- print_tok_type(fp, tok->id, "header", raw, xml);
- if (xml) {
- open_attr(fp, "version");
- print_1_byte(fp, tok->tt.hdr32.version, "%u");
- close_attr(fp);
- open_attr(fp, "event");
- print_event(fp, tok->tt.hdr32.e_type, raw, sfrm);
- close_attr(fp);
- open_attr(fp, "modifier");
- print_evmod(fp, tok->tt.hdr32.e_mod, raw);
- close_attr(fp);
- open_attr(fp, "time");
- print_sec32(fp, tok->tt.hdr32.s, raw);
- close_attr(fp);
- open_attr(fp, "msec");
- print_msec32(fp, tok->tt.hdr32.ms, 1);
- close_attr(fp);
- close_tag(fp, tok->id);
- } else {
- print_delim(fp, del);
- print_4_bytes(fp, tok->tt.hdr32.size, "%u");
- print_delim(fp, del);
- print_1_byte(fp, tok->tt.hdr32.version, "%u");
- print_delim(fp, del);
- print_event(fp, tok->tt.hdr32.e_type, raw, sfrm);
- print_delim(fp, del);
- print_evmod(fp, tok->tt.hdr32.e_mod, raw);
- print_delim(fp, del);
- print_sec32(fp, tok->tt.hdr32.s, raw);
- print_delim(fp, del);
- print_msec32(fp, tok->tt.hdr32.ms, raw);
- }
-}
-
-/*
- * The Solaris specifications for AUE_HEADER32_EX seem to differ a bit
- * depending on the bit of the specifications found. The OpenSolaris source
- * code uses a 4-byte address length, followed by some number of bytes of
- * address data. This contrasts with the Solaris audit.log.5 man page, which
- * specifies a 1-byte length field. We use the Solaris 10 definition so that
- * we can parse audit trails from that system.
- *
- * record byte count 4 bytes
- * version # 1 byte [2]
- * event type 2 bytes
- * event modifier 2 bytes
- * address type/length 4 bytes
- * [ Solaris man page: address type/length 1 byte]
- * machine address 4 bytes/16 bytes (IPv4/IPv6 address)
- * seconds of time 4 bytes/8 bytes (32/64-bits)
- * nanoseconds of time 4 bytes/8 bytes (32/64-bits)
- */
-static int
-fetch_header32_ex_tok(tokenstr_t *tok, u_char *buf, int len)
-{
- int err = 0;
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.hdr32_ex.size, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_CHAR(buf, len, tok->tt.hdr32_ex.version, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT16(buf, len, tok->tt.hdr32_ex.e_type, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT16(buf, len, tok->tt.hdr32_ex.e_mod, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.hdr32_ex.ad_type, tok->len, err);
- if (err)
- return (-1);
-
- bzero(tok->tt.hdr32_ex.addr, sizeof(tok->tt.hdr32_ex.addr));
- switch (tok->tt.hdr32_ex.ad_type) {
- case AU_IPv4:
- READ_TOKEN_BYTES(buf, len, &tok->tt.hdr32_ex.addr[0],
- sizeof(tok->tt.hdr32_ex.addr[0]), tok->len, err);
- if (err)
- return (-1);
- break;
-
- case AU_IPv6:
- READ_TOKEN_BYTES(buf, len, tok->tt.hdr32_ex.addr,
- sizeof(tok->tt.hdr32_ex.addr), tok->len, err);
- break;
- }
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.hdr32_ex.s, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.hdr32_ex.ms, tok->len, err);
- if (err)
- return (-1);
-
- return (0);
-}
-
-static void
-print_header32_ex_tok(FILE *fp, tokenstr_t *tok, char *del, char raw,
- char sfrm, int xml)
-{
-
- print_tok_type(fp, tok->id, "header_ex", raw, xml);
- if (xml) {
- open_attr(fp, "version");
- print_1_byte(fp, tok->tt.hdr32_ex.version, "%u");
- close_attr(fp);
- open_attr(fp, "event");
- print_event(fp, tok->tt.hdr32_ex.e_type, raw, sfrm);
- close_attr(fp);
- open_attr(fp, "modifier");
- print_evmod(fp, tok->tt.hdr32_ex.e_mod, raw);
- close_attr(fp);
- /*
- * No attribute for additional types.
- *
- print_ip_ex_address(fp, tok->tt.hdr32_ex.ad_type,
- tok->tt.hdr32_ex.addr);
- */
- open_attr(fp, "time");
- print_sec32(fp, tok->tt.hdr32_ex.s, raw);
- close_attr(fp);
- open_attr(fp, "msec");
- print_msec32(fp, tok->tt.hdr32_ex.ms, raw);
- close_attr(fp);
- close_tag(fp, tok->id);
- } else {
- print_delim(fp, del);
- print_4_bytes(fp, tok->tt.hdr32_ex.size, "%u");
- print_delim(fp, del);
- print_1_byte(fp, tok->tt.hdr32_ex.version, "%u");
- print_delim(fp, del);
- print_event(fp, tok->tt.hdr32_ex.e_type, raw, sfrm);
- print_delim(fp, del);
- print_evmod(fp, tok->tt.hdr32_ex.e_mod, raw);
- print_delim(fp, del);
- print_ip_ex_address(fp, tok->tt.hdr32_ex.ad_type,
- tok->tt.hdr32_ex.addr);
- print_delim(fp, del);
- print_sec32(fp, tok->tt.hdr32_ex.s, raw);
- print_delim(fp, del);
- print_msec32(fp, tok->tt.hdr32_ex.ms, raw);
- }
-}
-
-/*
- * record byte count 4 bytes
- * event type 2 bytes
- * event modifier 2 bytes
- * seconds of time 4 bytes/8 bytes (32-bit/64-bit value)
- * milliseconds of time 4 bytes/8 bytes (32-bit/64-bit value)
- * version #
- */
-static int
-fetch_header64_tok(tokenstr_t *tok, u_char *buf, int len)
-{
- int err = 0;
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.hdr64.size, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_CHAR(buf, len, tok->tt.hdr64.version, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT16(buf, len, tok->tt.hdr64.e_type, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT16(buf, len, tok->tt.hdr64.e_mod, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT64(buf, len, tok->tt.hdr64.s, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT64(buf, len, tok->tt.hdr64.ms, tok->len, err);
- if (err)
- return (-1);
-
- return (0);
-}
-
-static void
-print_header64_tok(FILE *fp, tokenstr_t *tok, char *del, char raw, char sfrm,
- int xml)
-{
-
- print_tok_type(fp, tok->id, "header", raw, xml);
- if (xml) {
- open_attr(fp, "version");
- print_1_byte(fp, tok->tt.hdr64.version, "%u");
- close_attr(fp);
- open_attr(fp, "event");
- print_event(fp, tok->tt.hdr64.e_type, raw, sfrm);
- close_attr(fp);
- open_attr(fp, "modifier");
- print_evmod(fp, tok->tt.hdr64.e_mod, raw);
- close_attr(fp);
- open_attr(fp, "time");
- print_sec64(fp, tok->tt.hdr64.s, raw);
- close_attr(fp);
- open_attr(fp, "msec");
- print_msec64(fp, tok->tt.hdr64.ms, raw);
- close_attr(fp);
- close_tag(fp, tok->id);
- } else {
- print_delim(fp, del);
- print_4_bytes(fp, tok->tt.hdr64.size, "%u");
- print_delim(fp, del);
- print_1_byte(fp, tok->tt.hdr64.version, "%u");
- print_delim(fp, del);
- print_event(fp, tok->tt.hdr64.e_type, raw, sfrm);
- print_delim(fp, del);
- print_evmod(fp, tok->tt.hdr64.e_mod, raw);
- print_delim(fp, del);
- print_sec64(fp, tok->tt.hdr64.s, raw);
- print_delim(fp, del);
- print_msec64(fp, tok->tt.hdr64.ms, raw);
- }
-}
-
-/*
- * record byte count 4 bytes
- * version # 1 byte [2]
- * event type 2 bytes
- * event modifier 2 bytes
- * address type/length 4 bytes
- * [ Solaris man page: address type/length 1 byte]
- * machine address 4 bytes/16 bytes (IPv4/IPv6 address)
- * seconds of time 4 bytes/8 bytes (32/64-bits)
- * nanoseconds of time 4 bytes/8 bytes (32/64-bits)
- *
- * XXXAUDIT: See comment by fetch_header32_ex_tok() for details on the
- * accuracy of the BSM spec.
- */
-static int
-fetch_header64_ex_tok(tokenstr_t *tok, u_char *buf, int len)
-{
- int err = 0;
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.hdr64_ex.size, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_CHAR(buf, len, tok->tt.hdr64_ex.version, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT16(buf, len, tok->tt.hdr64_ex.e_type, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT16(buf, len, tok->tt.hdr64_ex.e_mod, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.hdr64_ex.ad_type, tok->len, err);
- if (err)
- return (-1);
-
- bzero(tok->tt.hdr64_ex.addr, sizeof(tok->tt.hdr64_ex.addr));
- switch (tok->tt.hdr64_ex.ad_type) {
- case AU_IPv4:
- READ_TOKEN_BYTES(buf, len, &tok->tt.hdr64_ex.addr[0],
- sizeof(tok->tt.hdr64_ex.addr[0]), tok->len, err);
- if (err)
- return (-1);
- break;
-
- case AU_IPv6:
- READ_TOKEN_BYTES(buf, len, tok->tt.hdr64_ex.addr,
- sizeof(tok->tt.hdr64_ex.addr), tok->len, err);
- break;
- }
-
- READ_TOKEN_U_INT64(buf, len, tok->tt.hdr64_ex.s, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT64(buf, len, tok->tt.hdr64_ex.ms, tok->len, err);
- if (err)
- return (-1);
-
- return (0);
-}
-
-static void
-print_header64_ex_tok(FILE *fp, tokenstr_t *tok, char *del, char raw,
- char sfrm, int xml)
-{
-
- print_tok_type(fp, tok->id, "header_ex", raw, xml);
- if (xml) {
- open_attr(fp, "version");
- print_1_byte(fp, tok->tt.hdr64_ex.version, "%u");
- close_attr(fp);
- open_attr(fp, "event");
- print_event(fp, tok->tt.hdr64_ex.e_type, raw, sfrm);
- close_attr(fp);
- open_attr(fp, "modifier");
- print_evmod(fp, tok->tt.hdr64_ex.e_mod, raw);
- close_attr(fp);
- /*
- * No attribute for additional types.
- *
- print_ip_ex_address(fp, tok->tt.hdr64_ex.ad_type,
- tok->tt.hdr64_ex.addr);
- */
- open_attr(fp, "time");
- print_sec64(fp, tok->tt.hdr64_ex.s, raw);
- close_attr(fp);
- open_attr(fp, "msec");
- print_msec64(fp, tok->tt.hdr64_ex.ms, raw);
- close_attr(fp);
- close_tag(fp, tok->id);
- } else {
- print_delim(fp, del);
- print_4_bytes(fp, tok->tt.hdr64_ex.size, "%u");
- print_delim(fp, del);
- print_1_byte(fp, tok->tt.hdr64_ex.version, "%u");
- print_delim(fp, del);
- print_event(fp, tok->tt.hdr64_ex.e_type, raw, sfrm);
- print_delim(fp, del);
- print_evmod(fp, tok->tt.hdr64_ex.e_mod, raw);
- print_delim(fp, del);
- print_ip_ex_address(fp, tok->tt.hdr64_ex.ad_type,
- tok->tt.hdr64_ex.addr);
- print_delim(fp, del);
- print_sec64(fp, tok->tt.hdr64_ex.s, raw);
- print_delim(fp, del);
- print_msec64(fp, tok->tt.hdr64_ex.ms, raw);
- }
-}
-
-/*
- * trailer magic 2 bytes
- * record size 4 bytes
- */
-static int
-fetch_trailer_tok(tokenstr_t *tok, u_char *buf, int len)
-{
- int err = 0;
-
- READ_TOKEN_U_INT16(buf, len, tok->tt.trail.magic, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.trail.count, tok->len, err);
- if (err)
- return (-1);
-
- return (0);
-}
-
-static void
-print_trailer_tok(FILE *fp, tokenstr_t *tok, char *del, char raw,
- __unused char sfrm, int xml)
-{
-
- print_tok_type(fp, tok->id, "trailer", raw, xml);
- if (!xml) {
- print_delim(fp, del);
- print_4_bytes(fp, tok->tt.trail.count, "%u");
- }
-}
-
-/*
- * argument # 1 byte
- * argument value 4 bytes/8 bytes (32-bit/64-bit value)
- * text length 2 bytes
- * text N bytes + 1 terminating NULL byte
- */
-static int
-fetch_arg32_tok(tokenstr_t *tok, u_char *buf, int len)
-{
- int err = 0;
-
- READ_TOKEN_U_CHAR(buf, len, tok->tt.arg32.no, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.arg32.val, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT16(buf, len, tok->tt.arg32.len, tok->len, err);
- if (err)
- return (-1);
-
- SET_PTR((char*)buf, len, tok->tt.arg32.text, tok->tt.arg32.len,
- tok->len, err);
- if (err)
- return (-1);
-
- return (0);
-}
-
-static void
-print_arg32_tok(FILE *fp, tokenstr_t *tok, char *del, char raw,
- __unused char sfrm, int xml)
-{
-
- print_tok_type(fp, tok->id, "argument", raw, xml);
- if (xml) {
- open_attr(fp, "arg-num");
- print_1_byte(fp, tok->tt.arg32.no, "%u");
- close_attr(fp);
- open_attr(fp, "value");
- print_4_bytes(fp, tok->tt.arg32.val, "0x%x");
- close_attr(fp);
- open_attr(fp, "desc");
- print_string(fp, tok->tt.arg32.text, tok->tt.arg32.len);
- close_attr(fp);
- close_tag(fp, tok->id);
- } else {
- print_delim(fp, del);
- print_1_byte(fp, tok->tt.arg32.no, "%u");
- print_delim(fp, del);
- print_4_bytes(fp, tok->tt.arg32.val, "0x%x");
- print_delim(fp, del);
- print_string(fp, tok->tt.arg32.text, tok->tt.arg32.len);
- }
-}
-
-static int
-fetch_arg64_tok(tokenstr_t *tok, u_char *buf, int len)
-{
- int err = 0;
-
- READ_TOKEN_U_CHAR(buf, len, tok->tt.arg64.no, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT64(buf, len, tok->tt.arg64.val, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT16(buf, len, tok->tt.arg64.len, tok->len, err);
- if (err)
- return (-1);
-
- SET_PTR((char*)buf, len, tok->tt.arg64.text, tok->tt.arg64.len,
- tok->len, err);
- if (err)
- return (-1);
-
- return (0);
-}
-
-static void
-print_arg64_tok(FILE *fp, tokenstr_t *tok, char *del, char raw,
- __unused char sfrm, int xml)
-{
-
- print_tok_type(fp, tok->id, "argument", raw, xml);
- if (xml) {
- open_attr(fp, "arg-num");
- print_1_byte(fp, tok->tt.arg64.no, "%u");
- close_attr(fp);
- open_attr(fp, "value");
- print_8_bytes(fp, tok->tt.arg64.val, "0x%llx");
- close_attr(fp);
- open_attr(fp, "desc");
- print_string(fp, tok->tt.arg64.text, tok->tt.arg64.len);
- close_attr(fp);
- close_tag(fp, tok->id);
- } else {
- print_delim(fp, del);
- print_1_byte(fp, tok->tt.arg64.no, "%u");
- print_delim(fp, del);
- print_8_bytes(fp, tok->tt.arg64.val, "0x%llx");
- print_delim(fp, del);
- print_string(fp, tok->tt.arg64.text, tok->tt.arg64.len);
- }
-}
-
-/*
- * how to print 1 byte
- * basic unit 1 byte
- * unit count 1 byte
- * data items (depends on basic unit)
- */
-static int
-fetch_arb_tok(tokenstr_t *tok, u_char *buf, int len)
-{
- int err = 0;
- int datasize;
-
- READ_TOKEN_U_CHAR(buf, len, tok->tt.arb.howtopr, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_CHAR(buf, len, tok->tt.arb.bu, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_CHAR(buf, len, tok->tt.arb.uc, tok->len, err);
- if (err)
- return (-1);
-
- /*
- * Determine the size of the basic unit.
- */
- switch(tok->tt.arb.bu) {
- case AUR_BYTE:
- /* case AUR_CHAR: */
- datasize = AUR_BYTE_SIZE;
- break;
-
- case AUR_SHORT:
- datasize = AUR_SHORT_SIZE;
- break;
-
- case AUR_INT32:
- /* case AUR_INT: */
- datasize = AUR_INT32_SIZE;
- break;
-
- case AUR_INT64:
- datasize = AUR_INT64_SIZE;
- break;
-
- default:
- return (-1);
- }
-
- SET_PTR(buf, len, tok->tt.arb.data, datasize * tok->tt.arb.uc,
- tok->len, err);
- if (err)
- return (-1);
-
- return (0);
-}
-
-static void
-print_arb_tok(FILE *fp, tokenstr_t *tok, char *del, char raw,
- __unused char sfrm, int xml)
-{
- char *str;
- char *format;
- size_t size;
- int i;
-
- print_tok_type(fp, tok->id, "arbitrary", raw, xml);
- if (!xml)
- print_delim(fp, del);
-
- switch(tok->tt.arb.howtopr) {
- case AUP_BINARY:
- str = "binary";
- format = " %c";
- break;
-
- case AUP_OCTAL:
- str = "octal";
- format = " %o";
- break;
-
- case AUP_DECIMAL:
- str = "decimal";
- format = " %d";
- break;
-
- case AUP_HEX:
- str = "hex";
- format = " %x";
- break;
-
- case AUP_STRING:
- str = "string";
- format = "%c";
- break;
-
- default:
- return;
- }
-
- if (xml) {
- open_attr(fp, "print");
- fprintf(fp, "%s",str);
- close_attr(fp);
- } else {
- print_string(fp, str, strlen(str));
- print_delim(fp, del);
- }
- switch(tok->tt.arb.bu) {
- case AUR_BYTE:
- /* case AUR_CHAR: */
- str = "byte";
- size = AUR_BYTE_SIZE;
- if (xml) {
- open_attr(fp, "type");
- fprintf(fp, "%u", size);
- close_attr(fp);
- open_attr(fp, "count");
- print_1_byte(fp, tok->tt.arb.uc, "%u");
- close_attr(fp);
- fprintf(fp, ">");
- for (i = 0; i<tok->tt.arb.uc; i++)
- fprintf(fp, format, *(tok->tt.arb.data +
- (size * i)));
- close_tag(fp, tok->id);
- } else {
- print_string(fp, str, strlen(str));
- print_delim(fp, del);
- print_1_byte(fp, tok->tt.arb.uc, "%u");
- print_delim(fp, del);
- for (i = 0; i<tok->tt.arb.uc; i++)
- fprintf(fp, format, *(tok->tt.arb.data +
- (size * i)));
- }
- break;
-
- case AUR_SHORT:
- str = "short";
- size = AUR_SHORT_SIZE;
- if (xml) {
- open_attr(fp, "type");
- fprintf(fp, "%u", size);
- close_attr(fp);
- open_attr(fp, "count");
- print_1_byte(fp, tok->tt.arb.uc, "%u");
- close_attr(fp);
- fprintf(fp, ">");
- for (i = 0; i < tok->tt.arb.uc; i++)
- fprintf(fp, format,
- *((u_int16_t *)(tok->tt.arb.data +
- (size * i))));
- close_tag(fp, tok->id);
- } else {
- print_string(fp, str, strlen(str));
- print_delim(fp, del);
- print_1_byte(fp, tok->tt.arb.uc, "%u");
- print_delim(fp, del);
- for (i = 0; i < tok->tt.arb.uc; i++)
- fprintf(fp, format,
- *((u_int16_t *)(tok->tt.arb.data +
- (size * i))));
- }
- break;
-
- case AUR_INT32:
- /* case AUR_INT: */
- str = "int";
- size = AUR_INT32_SIZE;
- if (xml) {
- open_attr(fp, "type");
- fprintf(fp, "%u", size);
- close_attr(fp);
- open_attr(fp, "count");
- print_1_byte(fp, tok->tt.arb.uc, "%u");
- close_attr(fp);
- fprintf(fp, ">");
- for (i = 0; i < tok->tt.arb.uc; i++)
- fprintf(fp, format,
- *((u_int32_t *)(tok->tt.arb.data +
- (size * i))));
- close_tag(fp, tok->id);
- } else {
- print_string(fp, str, strlen(str));
- print_delim(fp, del);
- print_1_byte(fp, tok->tt.arb.uc, "%u");
- print_delim(fp, del);
- for (i = 0; i < tok->tt.arb.uc; i++)
- fprintf(fp, format,
- *((u_int32_t *)(tok->tt.arb.data +
- (size * i))));
- }
- break;
-
- case AUR_INT64:
- str = "int64";
- size = AUR_INT64_SIZE;
- if (xml) {
- open_attr(fp, "type");
- fprintf(fp, "%u", size);
- close_attr(fp);
- open_attr(fp, "count");
- print_1_byte(fp, tok->tt.arb.uc, "%u");
- close_attr(fp);
- fprintf(fp, ">");
- for (i = 0; i < tok->tt.arb.uc; i++)
- fprintf(fp, format,
- *((u_int64_t *)(tok->tt.arb.data +
- (size * i))));
- close_tag(fp, tok->id);
- } else {
- print_string(fp, str, strlen(str));
- print_delim(fp, del);
- print_1_byte(fp, tok->tt.arb.uc, "%u");
- print_delim(fp, del);
- for (i = 0; i < tok->tt.arb.uc; i++)
- fprintf(fp, format,
- *((u_int64_t *)(tok->tt.arb.data +
- (size * i))));
- }
- break;
-
- default:
- return;
- }
-}
-
-/*
- * file access mode 4 bytes
- * owner user ID 4 bytes
- * owner group ID 4 bytes
- * file system ID 4 bytes
- * node ID 8 bytes
- * device 4 bytes/8 bytes (32-bit/64-bit)
- */
-static int
-fetch_attr32_tok(tokenstr_t *tok, u_char *buf, int len)
-{
- int err = 0;
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.attr32.mode, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.attr32.uid, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.attr32.gid, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.attr32.fsid, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT64(buf, len, tok->tt.attr32.nid, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.attr32.dev, tok->len, err);
- if (err)
- return (-1);
-
- return (0);
-}
-
-static void
-print_attr32_tok(FILE *fp, tokenstr_t *tok, char *del, char raw,
- __unused char sfrm, int xml)
-{
-
- print_tok_type(fp, tok->id, "attribute", raw, xml);
- if (xml) {
- open_attr(fp, "mode");
- print_4_bytes(fp, tok->tt.attr32.mode, "%o");
- close_attr(fp);
- open_attr(fp, "uid");
- print_user(fp, tok->tt.attr32.uid, raw);
- close_attr(fp);
- open_attr(fp, "gid");
- print_group(fp, tok->tt.attr32.gid, raw);
- close_attr(fp);
- open_attr(fp, "fsid");
- print_4_bytes(fp, tok->tt.attr32.fsid, "%u");
- close_attr(fp);
- open_attr(fp, "nodeid");
- print_8_bytes(fp, tok->tt.attr32.nid, "%lld");
- close_attr(fp);
- open_attr(fp, "device");
- print_4_bytes(fp, tok->tt.attr32.dev, "%u");
- close_attr(fp);
- close_tag(fp, tok->id);
- } else {
- print_delim(fp, del);
- print_4_bytes(fp, tok->tt.attr32.mode, "%o");
- print_delim(fp, del);
- print_user(fp, tok->tt.attr32.uid, raw);
- print_delim(fp, del);
- print_group(fp, tok->tt.attr32.gid, raw);
- print_delim(fp, del);
- print_4_bytes(fp, tok->tt.attr32.fsid, "%u");
- print_delim(fp, del);
- print_8_bytes(fp, tok->tt.attr32.nid, "%lld");
- print_delim(fp, del);
- print_4_bytes(fp, tok->tt.attr32.dev, "%u");
- }
-}
-
-/*
- * file access mode 4 bytes
- * owner user ID 4 bytes
- * owner group ID 4 bytes
- * file system ID 4 bytes
- * node ID 8 bytes
- * device 4 bytes/8 bytes (32-bit/64-bit)
- */
-static int
-fetch_attr64_tok(tokenstr_t *tok, u_char *buf, int len)
-{
- int err = 0;
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.attr64.mode, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.attr64.uid, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.attr64.gid, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.attr64.fsid, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT64(buf, len, tok->tt.attr64.nid, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT64(buf, len, tok->tt.attr64.dev, tok->len, err);
- if (err)
- return (-1);
-
- return (0);
-}
-
-static void
-print_attr64_tok(FILE *fp, tokenstr_t *tok, char *del, char raw,
- __unused char sfrm, int xml)
-{
-
- print_tok_type(fp, tok->id, "attribute", raw, xml);
- if (xml) {
- open_attr(fp, "mode");
- print_4_bytes(fp, tok->tt.attr64.mode, "%o");
- close_attr(fp);
- open_attr(fp, "uid");
- print_user(fp, tok->tt.attr64.uid, raw);
- close_attr(fp);
- open_attr(fp, "gid");
- print_group(fp, tok->tt.attr64.gid, raw);
- close_attr(fp);
- open_attr(fp, "fsid");
- print_4_bytes(fp, tok->tt.attr64.fsid, "%u");
- close_attr(fp);
- open_attr(fp, "nodeid");
- print_8_bytes(fp, tok->tt.attr64.nid, "%lld");
- close_attr(fp);
- open_attr(fp, "device");
- print_8_bytes(fp, tok->tt.attr64.dev, "%llu");
- close_attr(fp);
- close_tag(fp, tok->id);
- } else {
- print_delim(fp, del);
- print_4_bytes(fp, tok->tt.attr64.mode, "%o");
- print_delim(fp, del);
- print_user(fp, tok->tt.attr64.uid, raw);
- print_delim(fp, del);
- print_group(fp, tok->tt.attr64.gid, raw);
- print_delim(fp, del);
- print_4_bytes(fp, tok->tt.attr64.fsid, "%u");
- print_delim(fp, del);
- print_8_bytes(fp, tok->tt.attr64.nid, "%lld");
- print_delim(fp, del);
- print_8_bytes(fp, tok->tt.attr64.dev, "%llu");
- }
-}
-
-/*
- * status 4 bytes
- * return value 4 bytes
- */
-static int
-fetch_exit_tok(tokenstr_t *tok, u_char *buf, int len)
-{
- int err = 0;
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.exit.status, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.exit.ret, tok->len, err);
- if (err)
- return (-1);
-
- return (0);
-}
-
-static void
-print_exit_tok(FILE *fp, tokenstr_t *tok, char *del, char raw,
- __unused char sfrm, int xml)
-{
-
- print_tok_type(fp, tok->id, "exit", raw, xml);
- if (xml) {
- open_attr(fp, "errval");
- print_errval(fp, tok->tt.exit.status);
- close_attr(fp);
- open_attr(fp, "retval");
- print_4_bytes(fp, tok->tt.exit.ret, "%u");
- close_attr(fp);
- close_tag(fp, tok->id);
- } else {
- print_delim(fp, del);
- print_errval(fp, tok->tt.exit.status);
- print_delim(fp, del);
- print_4_bytes(fp, tok->tt.exit.ret, "%u");
- }
-}
-
-/*
- * count 4 bytes
- * text count null-terminated string(s)
- */
-static int
-fetch_execarg_tok(tokenstr_t *tok, u_char *buf, int len)
-{
- int err = 0;
- int i;
- u_char *bptr;
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.execarg.count, tok->len, err);
- if (err)
- return (-1);
-
- for (i = 0; i < tok->tt.execarg.count; i++) {
- bptr = buf + tok->len;
- if (i < AUDIT_MAX_ARGS)
- tok->tt.execarg.text[i] = (char*)bptr;
-
- /* Look for a null terminated string. */
- while (bptr && (*bptr != '\0')) {
- if (++tok->len >=len)
- return (-1);
- bptr = buf + tok->len;
- }
- if (!bptr)
- return (-1);
- tok->len++; /* \0 character */
- }
- if (tok->tt.execarg.count > AUDIT_MAX_ARGS)
- tok->tt.execarg.count = AUDIT_MAX_ARGS;
-
- return (0);
-}
-
-static void
-print_execarg_tok(FILE *fp, tokenstr_t *tok, char *del, char raw,
- __unused char sfrm, int xml)
-{
- int i;
-
- print_tok_type(fp, tok->id, "exec arg", raw, xml);
- for (i = 0; i < tok->tt.execarg.count; i++) {
- if (xml) {
- fprintf(fp, "<arg>");
- print_string(fp, tok->tt.execarg.text[i],
- strlen(tok->tt.execarg.text[i]));
- fprintf(fp, "</arg>");
- } else {
- print_delim(fp, del);
- print_string(fp, tok->tt.execarg.text[i],
- strlen(tok->tt.execarg.text[i]));
- }
- }
- if (xml)
- close_tag(fp, tok->id);
-}
-
-/*
- * count 4 bytes
- * text count null-terminated string(s)
- */
-static int
-fetch_execenv_tok(tokenstr_t *tok, u_char *buf, int len)
-{
- int err = 0;
- int i;
- u_char *bptr;
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.execenv.count, tok->len, err);
- if (err)
- return (-1);
-
- for (i = 0; i < tok->tt.execenv.count; i++) {
- bptr = buf + tok->len;
- if (i < AUDIT_MAX_ENV)
- tok->tt.execenv.text[i] = (char*)bptr;
-
- /* Look for a null terminated string. */
- while (bptr && (*bptr != '\0')) {
- if (++tok->len >=len)
- return (-1);
- bptr = buf + tok->len;
- }
- if (!bptr)
- return (-1);
- tok->len++; /* \0 character */
- }
- if (tok->tt.execenv.count > AUDIT_MAX_ENV)
- tok->tt.execenv.count = AUDIT_MAX_ENV;
-
- return (0);
-}
-
-static void
-print_execenv_tok(FILE *fp, tokenstr_t *tok, char *del, char raw,
- __unused char sfrm, int xml)
-{
- int i;
-
- print_tok_type(fp, tok->id, "exec env", raw, xml);
- for (i = 0; i< tok->tt.execenv.count; i++) {
- if (xml) {
- fprintf(fp, "<env>");
- print_string(fp, tok->tt.execenv.text[i],
- strlen(tok->tt.execenv.text[i]));
- fprintf(fp, "</env>");
- } else {
- print_delim(fp, del);
- print_string(fp, tok->tt.execenv.text[i],
- strlen(tok->tt.execenv.text[i]));
- }
- }
- if (xml)
- close_tag(fp, tok->id);
-}
-
-/*
- * seconds of time 4 bytes
- * milliseconds of time 4 bytes
- * file name len 2 bytes
- * file pathname N bytes + 1 terminating NULL byte
- */
-static int
-fetch_file_tok(tokenstr_t *tok, u_char *buf, int len)
-{
- int err = 0;
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.file.s, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.file.ms, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT16(buf, len, tok->tt.file.len, tok->len, err);
- if (err)
- return (-1);
-
- SET_PTR((char*)buf, len, tok->tt.file.name, tok->tt.file.len, tok->len,
- err);
- if (err)
- return (-1);
-
- return (0);
-}
-
-static void
-print_file_tok(FILE *fp, tokenstr_t *tok, char *del, char raw,
- __unused char sfrm, int xml)
-{
-
- print_tok_type(fp, tok->id, "file", raw, xml);
- if (xml) {
- open_attr(fp, "time");
- print_sec32(fp, tok->tt.file.s, raw);
- close_attr(fp);
- open_attr(fp, "msec");
- print_msec32(fp, tok->tt.file.ms, raw);
- close_attr(fp);
- fprintf(fp, ">");
- print_string(fp, tok->tt.file.name, tok->tt.file.len);
- close_tag(fp, tok->id);
- } else {
- print_delim(fp, del);
- print_sec32(fp, tok->tt.file.s, raw);
- print_delim(fp, del);
- print_msec32(fp, tok->tt.file.ms, raw);
- print_delim(fp, del);
- print_string(fp, tok->tt.file.name, tok->tt.file.len);
- }
-}
-
-/*
- * number groups 2 bytes
- * group list count * 4 bytes
- */
-static int
-fetch_newgroups_tok(tokenstr_t *tok, u_char *buf, int len)
-{
- int i;
- int err = 0;
-
- READ_TOKEN_U_INT16(buf, len, tok->tt.grps.no, tok->len, err);
- if (err)
- return (-1);
-
- for (i = 0; i<tok->tt.grps.no; i++) {
- READ_TOKEN_U_INT32(buf, len, tok->tt.grps.list[i], tok->len,
- err);
- if (err)
- return (-1);
- }
-
- return (0);
-}
-
-static void
-print_newgroups_tok(FILE *fp, tokenstr_t *tok, char *del, char raw,
- __unused char sfrm, int xml)
-{
- int i;
-
- print_tok_type(fp, tok->id, "group", raw, xml);
- for (i = 0; i < tok->tt.grps.no; i++) {
- if (xml) {
- fprintf(fp, "<gid>");
- print_group(fp, tok->tt.grps.list[i], raw);
- fprintf(fp, "</gid>");
- close_tag(fp, tok->id);
- } else {
- print_delim(fp, del);
- print_group(fp, tok->tt.grps.list[i], raw);
- }
- }
-}
-
-/*
- * Internet addr 4 bytes
- */
-static int
-fetch_inaddr_tok(tokenstr_t *tok, u_char *buf, int len)
-{
- int err = 0;
-
- READ_TOKEN_BYTES(buf, len, &tok->tt.inaddr.addr, sizeof(uint32_t),
- tok->len, err);
- if (err)
- return (-1);
-
- return (0);
-
-}
-
-static void
-print_inaddr_tok(FILE *fp, tokenstr_t *tok, char *del, char raw,
- __unused char sfrm, int xml)
-{
-
- print_tok_type(fp, tok->id, "ip addr", raw, xml);
- if (xml) {
- print_ip_address(fp, tok->tt.inaddr.addr);
- close_tag(fp, tok->id);
- } else {
- print_delim(fp, del);
- print_ip_address(fp, tok->tt.inaddr.addr);
- }
-}
-
-/*
- * type 4 bytes
- * address 16 bytes
- */
-static int
-fetch_inaddr_ex_tok(tokenstr_t *tok, u_char *buf, int len)
-{
- int err = 0;
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.inaddr_ex.type, tok->len, err);
- if (err)
- return (-1);
-
- if (tok->tt.inaddr_ex.type == AU_IPv4) {
- READ_TOKEN_BYTES(buf, len, &tok->tt.inaddr_ex.addr[0],
- sizeof(tok->tt.inaddr_ex.addr[0]), tok->len, err);
- if (err)
- return (-1);
- } else if (tok->tt.inaddr_ex.type == AU_IPv6) {
- READ_TOKEN_BYTES(buf, len, tok->tt.inaddr_ex.addr,
- sizeof(tok->tt.inaddr_ex.addr), tok->len, err);
- if (err)
- return (-1);
- } else
- return (-1);
-
- return (0);
-}
-
-static void
-print_inaddr_ex_tok(FILE *fp, tokenstr_t *tok, char *del, char raw,
- __unused char sfrm, int xml)
-{
-
- print_tok_type(fp, tok->id, "ip addr ex", raw, xml);
- if (xml) {
- print_ip_ex_address(fp, tok->tt.inaddr_ex.type,
- tok->tt.inaddr_ex.addr);
- close_tag(fp, tok->id);
- } else {
- print_delim(fp, del);
- print_ip_ex_address(fp, tok->tt.inaddr_ex.type,
- tok->tt.inaddr_ex.addr);
- }
-}
-
-/*
- * ip header 20 bytes
- */
-static int
-fetch_ip_tok(tokenstr_t *tok, u_char *buf, int len)
-{
- int err = 0;
-
- READ_TOKEN_U_CHAR(buf, len, tok->tt.ip.version, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_CHAR(buf, len, tok->tt.ip.tos, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_BYTES(buf, len, &tok->tt.ip.len, sizeof(uint16_t),
- tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_BYTES(buf, len, &tok->tt.ip.id, sizeof(uint16_t),
- tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_BYTES(buf, len, &tok->tt.ip.offset, sizeof(uint16_t),
- tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_CHAR(buf, len, tok->tt.ip.ttl, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_CHAR(buf, len, tok->tt.ip.prot, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_BYTES(buf, len, &tok->tt.ip.chksm, sizeof(uint16_t),
- tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_BYTES(buf, len, &tok->tt.ip.src, sizeof(tok->tt.ip.src),
- tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_BYTES(buf, len, &tok->tt.ip.dest, sizeof(tok->tt.ip.dest),
- tok->len, err);
- if (err)
- return (-1);
-
- return (0);
-}
-
-static void
-print_ip_tok(FILE *fp, tokenstr_t *tok, char *del, char raw,
- __unused char sfrm, int xml)
-{
-
- print_tok_type(fp, tok->id, "ip", raw, xml);
- if (xml) {
- open_attr(fp, "version");
- print_mem(fp, (u_char *)(&tok->tt.ip.version),
- sizeof(u_char));
- close_attr(fp);
- open_attr(fp, "service_type");
- print_mem(fp, (u_char *)(&tok->tt.ip.tos), sizeof(u_char));
- close_attr(fp);
- open_attr(fp, "len");
- print_2_bytes(fp, ntohs(tok->tt.ip.len), "%u");
- close_attr(fp);
- open_attr(fp, "id");
- print_2_bytes(fp, ntohs(tok->tt.ip.id), "%u");
- close_attr(fp);
- open_attr(fp, "offset");
- print_2_bytes(fp, ntohs(tok->tt.ip.offset), "%u");
- close_attr(fp);
- open_attr(fp, "time_to_live");
- print_mem(fp, (u_char *)(&tok->tt.ip.ttl), sizeof(u_char));
- close_attr(fp);
- open_attr(fp, "protocol");
- print_mem(fp, (u_char *)(&tok->tt.ip.prot), sizeof(u_char));
- close_attr(fp);
- open_attr(fp, "cksum");
- print_2_bytes(fp, ntohs(tok->tt.ip.chksm), "%u");
- close_attr(fp);
- open_attr(fp, "src_addr");
- print_ip_address(fp, tok->tt.ip.src);
- close_attr(fp);
- open_attr(fp, "dest_addr");
- print_ip_address(fp, tok->tt.ip.dest);
- close_attr(fp);
- close_tag(fp, tok->id);
- } else {
- print_delim(fp, del);
- print_mem(fp, (u_char *)(&tok->tt.ip.version),
- sizeof(u_char));
- print_delim(fp, del);
- print_mem(fp, (u_char *)(&tok->tt.ip.tos), sizeof(u_char));
- print_delim(fp, del);
- print_2_bytes(fp, ntohs(tok->tt.ip.len), "%u");
- print_delim(fp, del);
- print_2_bytes(fp, ntohs(tok->tt.ip.id), "%u");
- print_delim(fp, del);
- print_2_bytes(fp, ntohs(tok->tt.ip.offset), "%u");
- print_delim(fp, del);
- print_mem(fp, (u_char *)(&tok->tt.ip.ttl), sizeof(u_char));
- print_delim(fp, del);
- print_mem(fp, (u_char *)(&tok->tt.ip.prot), sizeof(u_char));
- print_delim(fp, del);
- print_2_bytes(fp, ntohs(tok->tt.ip.chksm), "%u");
- print_delim(fp, del);
- print_ip_address(fp, tok->tt.ip.src);
- print_delim(fp, del);
- print_ip_address(fp, tok->tt.ip.dest);
- }
-}
-
-/*
- * object ID type 1 byte
- * Object ID 4 bytes
- */
-static int
-fetch_ipc_tok(tokenstr_t *tok, u_char *buf, int len)
-{
- int err = 0;
-
- READ_TOKEN_U_CHAR(buf, len, tok->tt.ipc.type, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.ipc.id, tok->len, err);
- if (err)
- return (-1);
-
- return (0);
-}
-
-static void
-print_ipc_tok(FILE *fp, tokenstr_t *tok, char *del, char raw,
- __unused char sfrm, int xml)
-{
-
- print_tok_type(fp, tok->id, "IPC", raw, xml);
- if (xml) {
- open_attr(fp, "ipc-type");
- print_ipctype(fp, tok->tt.ipc.type, raw);
- close_attr(fp);
- open_attr(fp, "ipc-id");
- print_4_bytes(fp, tok->tt.ipc.id, "%u");
- close_attr(fp);
- close_tag(fp, tok->id);
- } else {
- print_delim(fp, del);
- print_ipctype(fp, tok->tt.ipc.type, raw);
- print_delim(fp, del);
- print_4_bytes(fp, tok->tt.ipc.id, "%u");
- }
-}
-
-/*
- * owner user id 4 bytes
- * owner group id 4 bytes
- * creator user id 4 bytes
- * creator group id 4 bytes
- * access mode 4 bytes
- * slot seq 4 bytes
- * key 4 bytes
- */
-static int
-fetch_ipcperm_tok(tokenstr_t *tok, u_char *buf, int len)
-{
- int err = 0;
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.ipcperm.uid, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.ipcperm.gid, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.ipcperm.puid, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.ipcperm.pgid, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.ipcperm.mode, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.ipcperm.seq, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.ipcperm.key, tok->len, err);
- if (err)
- return (-1);
-
- return (0);
-}
-
-static void
-print_ipcperm_tok(FILE *fp, tokenstr_t *tok, char *del, char raw,
- __unused char sfrm, int xml)
-{
-
- print_tok_type(fp, tok->id, "IPC perm", raw, xml);
- if (xml) {
- open_attr(fp, "uid");
- print_user(fp, tok->tt.ipcperm.uid, raw);
- close_attr(fp);
- open_attr(fp, "gid");
- print_group(fp, tok->tt.ipcperm.gid, raw);
- close_attr(fp);
- open_attr(fp, "creator-uid");
- print_user(fp, tok->tt.ipcperm.puid, raw);
- close_attr(fp);
- open_attr(fp, "creator-gid");
- print_group(fp, tok->tt.ipcperm.pgid, raw);
- close_attr(fp);
- open_attr(fp, "mode");
- print_4_bytes(fp, tok->tt.ipcperm.mode, "%o");
- close_attr(fp);
- open_attr(fp, "seq");
- print_4_bytes(fp, tok->tt.ipcperm.seq, "%u");
- close_attr(fp);
- open_attr(fp, "key");
- print_4_bytes(fp, tok->tt.ipcperm.key, "%u");
- close_attr(fp);
- close_tag(fp, tok->id);
- } else {
- print_delim(fp, del);
- print_user(fp, tok->tt.ipcperm.uid, raw);
- print_delim(fp, del);
- print_group(fp, tok->tt.ipcperm.gid, raw);
- print_delim(fp, del);
- print_user(fp, tok->tt.ipcperm.puid, raw);
- print_delim(fp, del);
- print_group(fp, tok->tt.ipcperm.pgid, raw);
- print_delim(fp, del);
- print_4_bytes(fp, tok->tt.ipcperm.mode, "%o");
- print_delim(fp, del);
- print_4_bytes(fp, tok->tt.ipcperm.seq, "%u");
- print_delim(fp, del);
- print_4_bytes(fp, tok->tt.ipcperm.key, "%u");
- }
-}
-
-/*
- * port Ip address 2 bytes
- */
-static int
-fetch_iport_tok(tokenstr_t *tok, u_char *buf, int len)
-{
- int err = 0;
-
- READ_TOKEN_BYTES(buf, len, &tok->tt.iport.port, sizeof(uint16_t),
- tok->len, err);
- if (err)
- return (-1);
-
- return (0);
-}
-
-static void
-print_iport_tok(FILE *fp, tokenstr_t *tok, char *del, char raw,
- __unused char sfrm, int xml)
-{
-
- print_tok_type(fp, tok->id, "ip port", raw, xml);
- if (xml) {
- print_2_bytes(fp, ntohs(tok->tt.iport.port), "%#x");
- close_tag(fp, tok->id);
- } else {
- print_delim(fp, del);
- print_2_bytes(fp, ntohs(tok->tt.iport.port), "%#x");
- }
-}
-
-/*
- * size 2 bytes
- * data size bytes
- */
-static int
-fetch_opaque_tok(tokenstr_t *tok, u_char *buf, int len)
-{
- int err = 0;
-
- READ_TOKEN_U_INT16(buf, len, tok->tt.opaque.size, tok->len, err);
- if (err)
- return (-1);
-
- SET_PTR((char*)buf, len, tok->tt.opaque.data, tok->tt.opaque.size,
- tok->len, err);
- if (err)
- return (-1);
-
- return (0);
-}
-
-static void
-print_opaque_tok(FILE *fp, tokenstr_t *tok, char *del, char raw,
- __unused char sfrm, int xml)
-{
-
- print_tok_type(fp, tok->id, "opaque", raw, xml);
- if (xml) {
- print_mem(fp, (u_char*)tok->tt.opaque.data,
- tok->tt.opaque.size);
- close_tag(fp, tok->id);
- } else {
- print_delim(fp, del);
- print_2_bytes(fp, tok->tt.opaque.size, "%u");
- print_delim(fp, del);
- print_mem(fp, (u_char*)tok->tt.opaque.data,
- tok->tt.opaque.size);
- }
-}
-
-/*
- * size 2 bytes
- * data size bytes
- */
-static int
-fetch_path_tok(tokenstr_t *tok, u_char *buf, int len)
-{
- int err = 0;
-
- READ_TOKEN_U_INT16(buf, len, tok->tt.path.len, tok->len, err);
- if (err)
- return (-1);
-
- SET_PTR((char*)buf, len, tok->tt.path.path, tok->tt.path.len, tok->len,
- err);
- if (err)
- return (-1);
-
- return (0);
-}
-
-static void
-print_path_tok(FILE *fp, tokenstr_t *tok, char *del, char raw,
- __unused char sfrm, int xml)
-{
-
- print_tok_type(fp, tok->id, "path", raw, xml);
- if (xml) {
- print_string(fp, tok->tt.path.path, tok->tt.path.len);
- close_tag(fp, tok->id);
- } else {
- print_delim(fp, del);
- print_string(fp, tok->tt.path.path, tok->tt.path.len);
- }
-}
-
-/*
- * token ID 1 byte
- * audit ID 4 bytes
- * euid 4 bytes
- * egid 4 bytes
- * ruid 4 bytes
- * rgid 4 bytes
- * pid 4 bytes
- * sessid 4 bytes
- * terminal ID
- * portid 4 bytes
- * machine id 4 bytes
- */
-static int
-fetch_process32_tok(tokenstr_t *tok, u_char *buf, int len)
-{
- int err = 0;
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.proc32.auid, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.proc32.euid, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.proc32.egid, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.proc32.ruid, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.proc32.rgid, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.proc32.pid, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.proc32.sid, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.proc32.tid.port, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_BYTES(buf, len, &tok->tt.proc32.tid.addr,
- sizeof(tok->tt.proc32.tid.addr), tok->len, err);
- if (err)
- return (-1);
-
- return (0);
-}
-
-static void
-print_process32_tok(FILE *fp, tokenstr_t *tok, char *del, char raw,
- __unused char sfrm, int xml)
-{
-
- print_tok_type(fp, tok->id, "process", raw, xml);
- if (xml) {
- open_attr(fp, "audit-uid");
- print_user(fp, tok->tt.proc32.auid, raw);
- close_attr(fp);
- open_attr(fp, "uid");
- print_user(fp, tok->tt.proc32.euid, raw);
- close_attr(fp);
- open_attr(fp, "gid");
- print_group(fp, tok->tt.proc32.egid, raw);
- close_attr(fp);
- open_attr(fp, "ruid");
- print_user(fp, tok->tt.proc32.ruid, raw);
- close_attr(fp);
- open_attr(fp, "rgid");
- print_group(fp, tok->tt.proc32.rgid, raw);
- close_attr(fp);
- open_attr(fp, "pid");
- print_4_bytes(fp, tok->tt.proc32.pid, "%u");
- close_attr(fp);
- open_attr(fp, "sid");
- print_4_bytes(fp, tok->tt.proc32.sid, "%u");
- close_attr(fp);
- open_attr(fp, "tid");
- print_4_bytes(fp, tok->tt.proc32.tid.port, "%u");
- print_ip_address(fp, tok->tt.proc32.tid.addr);
- close_attr(fp);
- close_tag(fp, tok->id);
- } else {
- print_delim(fp, del);
- print_user(fp, tok->tt.proc32.auid, raw);
- print_delim(fp, del);
- print_user(fp, tok->tt.proc32.euid, raw);
- print_delim(fp, del);
- print_group(fp, tok->tt.proc32.egid, raw);
- print_delim(fp, del);
- print_user(fp, tok->tt.proc32.ruid, raw);
- print_delim(fp, del);
- print_group(fp, tok->tt.proc32.rgid, raw);
- print_delim(fp, del);
- print_4_bytes(fp, tok->tt.proc32.pid, "%u");
- print_delim(fp, del);
- print_4_bytes(fp, tok->tt.proc32.sid, "%u");
- print_delim(fp, del);
- print_4_bytes(fp, tok->tt.proc32.tid.port, "%u");
- print_delim(fp, del);
- print_ip_address(fp, tok->tt.proc32.tid.addr);
- }
-}
-
-/*
- * token ID 1 byte
- * audit ID 4 bytes
- * euid 4 bytes
- * egid 4 bytes
- * ruid 4 bytes
- * rgid 4 bytes
- * pid 4 bytes
- * sessid 4 bytes
- * terminal ID
- * portid 8 bytes
- * machine id 4 bytes
- */
-static int
-fetch_process64_tok(tokenstr_t *tok, u_char *buf, int len)
-{
- int err = 0;
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.proc64.auid, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.proc64.euid, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.proc64.egid, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.proc64.ruid, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.proc64.rgid, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.proc64.pid, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.proc64.sid, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT64(buf, len, tok->tt.proc64.tid.port, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_BYTES(buf, len, &tok->tt.proc64.tid.addr,
- sizeof(tok->tt.proc64.tid.addr), tok->len, err);
- if (err)
- return (-1);
-
- return (0);
-}
-
-static void
-print_process64_tok(FILE *fp, tokenstr_t *tok, char *del, char raw,
- __unused char sfrm, int xml)
-{
- print_tok_type(fp, tok->id, "process", raw, xml);
- if (xml) {
- open_attr(fp, "audit-uid");
- print_user(fp, tok->tt.proc64.auid, raw);
- close_attr(fp);
- open_attr(fp, "uid");
- print_user(fp, tok->tt.proc64.euid, raw);
- close_attr(fp);
- open_attr(fp, "gid");
- print_group(fp, tok->tt.proc64.egid, raw);
- close_attr(fp);
- open_attr(fp, "ruid");
- print_user(fp, tok->tt.proc64.ruid, raw);
- close_attr(fp);
- open_attr(fp, "rgid");
- print_group(fp, tok->tt.proc64.rgid, raw);
- close_attr(fp);
- open_attr(fp, "pid");
- print_4_bytes(fp, tok->tt.proc64.pid, "%u");
- close_attr(fp);
- open_attr(fp, "sid");
- print_4_bytes(fp, tok->tt.proc64.sid, "%u");
- close_attr(fp);
- open_attr(fp, "tid");
- print_8_bytes(fp, tok->tt.proc64.tid.port, "%llu");
- print_ip_address(fp, tok->tt.proc64.tid.addr);
- close_attr(fp);
- close_tag(fp, tok->id);
- } else {
- print_delim(fp, del);
- print_user(fp, tok->tt.proc64.auid, raw);
- print_delim(fp, del);
- print_user(fp, tok->tt.proc64.euid, raw);
- print_delim(fp, del);
- print_group(fp, tok->tt.proc64.egid, raw);
- print_delim(fp, del);
- print_user(fp, tok->tt.proc64.ruid, raw);
- print_delim(fp, del);
- print_group(fp, tok->tt.proc64.rgid, raw);
- print_delim(fp, del);
- print_4_bytes(fp, tok->tt.proc64.pid, "%u");
- print_delim(fp, del);
- print_4_bytes(fp, tok->tt.proc64.sid, "%u");
- print_delim(fp, del);
- print_8_bytes(fp, tok->tt.proc64.tid.port, "%llu");
- print_delim(fp, del);
- print_ip_address(fp, tok->tt.proc64.tid.addr);
- }
-}
-
-/*
- * token ID 1 byte
- * audit ID 4 bytes
- * effective user ID 4 bytes
- * effective group ID 4 bytes
- * real user ID 4 bytes
- * real group ID 4 bytes
- * process ID 4 bytes
- * session ID 4 bytes
- * terminal ID
- * port ID 4 bytes
- * address type-len 4 bytes
- * machine address 16 bytes
- */
-static int
-fetch_process32ex_tok(tokenstr_t *tok, u_char *buf, int len)
-{
- int err = 0;
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.proc32_ex.auid, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.proc32_ex.euid, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.proc32_ex.egid, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.proc32_ex.ruid, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.proc32_ex.rgid, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.proc32_ex.pid, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.proc32_ex.sid, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.proc32_ex.tid.port, tok->len,
- err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.proc32_ex.tid.type, tok->len,
- err);
- if (err)
- return (-1);
-
- if (tok->tt.proc32_ex.tid.type == AU_IPv4) {
- READ_TOKEN_BYTES(buf, len, &tok->tt.proc32_ex.tid.addr[0],
- sizeof(tok->tt.proc32_ex.tid.addr[0]), tok->len, err);
- if (err)
- return (-1);
- } else if (tok->tt.proc32_ex.tid.type == AU_IPv6) {
- READ_TOKEN_BYTES(buf, len, tok->tt.proc32_ex.tid.addr,
- sizeof(tok->tt.proc32_ex.tid.addr), tok->len, err);
- if (err)
- return (-1);
- } else
- return (-1);
-
- return (0);
-}
-
-static void
-print_process32ex_tok(FILE *fp, tokenstr_t *tok, char *del, char raw,
- __unused char sfrm, int xml)
-{
-
- print_tok_type(fp, tok->id, "process_ex", raw, xml);
- if (xml) {
- open_attr(fp, "audit-uid");
- print_user(fp, tok->tt.proc32_ex.auid, raw);
- close_attr(fp);
- open_attr(fp, "uid");
- print_user(fp, tok->tt.proc32_ex.euid, raw);
- close_attr(fp);
- open_attr(fp, "gid");
- print_group(fp, tok->tt.proc32_ex.egid, raw);
- close_attr(fp);
- open_attr(fp, "ruid");
- print_user(fp, tok->tt.proc32_ex.ruid, raw);
- close_attr(fp);
- open_attr(fp, "rgid");
- print_group(fp, tok->tt.proc32_ex.rgid, raw);
- close_attr(fp);
- open_attr(fp, "pid");
- print_4_bytes(fp, tok->tt.proc32_ex.pid, "%u");
- close_attr(fp);
- open_attr(fp, "sid");
- print_4_bytes(fp, tok->tt.proc32_ex.sid, "%u");
- close_attr(fp);
- open_attr(fp, "tid");
- print_4_bytes(fp, tok->tt.proc32_ex.tid.port, "%u");
- print_ip_ex_address(fp, tok->tt.proc32_ex.tid.type,
- tok->tt.proc32_ex.tid.addr);
- close_attr(fp);
- close_tag(fp, tok->id);
- } else {
- print_delim(fp, del);
- print_user(fp, tok->tt.proc32_ex.auid, raw);
- print_delim(fp, del);
- print_user(fp, tok->tt.proc32_ex.euid, raw);
- print_delim(fp, del);
- print_group(fp, tok->tt.proc32_ex.egid, raw);
- print_delim(fp, del);
- print_user(fp, tok->tt.proc32_ex.ruid, raw);
- print_delim(fp, del);
- print_group(fp, tok->tt.proc32_ex.rgid, raw);
- print_delim(fp, del);
- print_4_bytes(fp, tok->tt.proc32_ex.pid, "%u");
- print_delim(fp, del);
- print_4_bytes(fp, tok->tt.proc32_ex.sid, "%u");
- print_delim(fp, del);
- print_4_bytes(fp, tok->tt.proc32_ex.tid.port, "%u");
- print_delim(fp, del);
- print_ip_ex_address(fp, tok->tt.proc32_ex.tid.type,
- tok->tt.proc32_ex.tid.addr);
- }
-}
-
-/*
- * token ID 1 byte
- * audit ID 4 bytes
- * effective user ID 4 bytes
- * effective group ID 4 bytes
- * real user ID 4 bytes
- * real group ID 4 bytes
- * process ID 4 bytes
- * session ID 4 bytes
- * terminal ID
- * port ID 8 bytes
- * address type-len 4 bytes
- * machine address 16 bytes
- */
-static int
-fetch_process64ex_tok(tokenstr_t *tok, u_char *buf, int len)
-{
- int err = 0;
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.proc64_ex.auid, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.proc64_ex.euid, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.proc64_ex.egid, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.proc64_ex.ruid, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.proc64_ex.rgid, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.proc64_ex.pid, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.proc64_ex.sid, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT64(buf, len, tok->tt.proc64_ex.tid.port, tok->len,
- err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.proc64_ex.tid.type, tok->len,
- err);
- if (err)
- return (-1);
-
- if (tok->tt.proc64_ex.tid.type == AU_IPv4) {
- READ_TOKEN_BYTES(buf, len, &tok->tt.proc64_ex.tid.addr[0],
- sizeof(tok->tt.proc64_ex.tid.addr[0]), tok->len, err);
- if (err)
- return (-1);
- } else if (tok->tt.proc64_ex.tid.type == AU_IPv6) {
- READ_TOKEN_BYTES(buf, len, tok->tt.proc64_ex.tid.addr,
- sizeof(tok->tt.proc64_ex.tid.addr), tok->len, err);
- if (err)
- return (-1);
- } else
- return (-1);
-
- return (0);
-}
-
-static void
-print_process64ex_tok(FILE *fp, tokenstr_t *tok, char *del, char raw,
- __unused char sfrm, int xml)
-{
- print_tok_type(fp, tok->id, "process_ex", raw, xml);
- if (xml) {
- open_attr(fp, "audit-uid");
- print_user(fp, tok->tt.proc64_ex.auid, raw);
- close_attr(fp);
- open_attr(fp, "uid");
- print_user(fp, tok->tt.proc64_ex.euid, raw);
- close_attr(fp);
- open_attr(fp, "gid");
- print_group(fp, tok->tt.proc64_ex.egid, raw);
- close_attr(fp);
- open_attr(fp, "ruid");
- print_user(fp, tok->tt.proc64_ex.ruid, raw);
- close_attr(fp);
- open_attr(fp, "rgid");
- print_group(fp, tok->tt.proc64_ex.rgid, raw);
- close_attr(fp);
- open_attr(fp, "pid");
- print_4_bytes(fp, tok->tt.proc64_ex.pid, "%u");
- close_attr(fp);
- open_attr(fp, "sid");
- print_4_bytes(fp, tok->tt.proc64_ex.sid, "%u");
- close_attr(fp);
- open_attr(fp, "tid");
- print_8_bytes(fp, tok->tt.proc64_ex.tid.port, "%llu");
- print_ip_ex_address(fp, tok->tt.proc64_ex.tid.type,
- tok->tt.proc64_ex.tid.addr);
- close_attr(fp);
- close_tag(fp, tok->id);
- } else {
- print_delim(fp, del);
- print_user(fp, tok->tt.proc64_ex.auid, raw);
- print_delim(fp, del);
- print_user(fp, tok->tt.proc64_ex.euid, raw);
- print_delim(fp, del);
- print_group(fp, tok->tt.proc64_ex.egid, raw);
- print_delim(fp, del);
- print_user(fp, tok->tt.proc64_ex.ruid, raw);
- print_delim(fp, del);
- print_group(fp, tok->tt.proc64_ex.rgid, raw);
- print_delim(fp, del);
- print_4_bytes(fp, tok->tt.proc64_ex.pid, "%u");
- print_delim(fp, del);
- print_4_bytes(fp, tok->tt.proc64_ex.sid, "%u");
- print_delim(fp, del);
- print_8_bytes(fp, tok->tt.proc64_ex.tid.port, "%llu");
- print_delim(fp, del);
- print_ip_ex_address(fp, tok->tt.proc64_ex.tid.type,
- tok->tt.proc64_ex.tid.addr);
- }
-}
-
-/*
- * errno 1 byte
- * return value 4 bytes
- */
-static int
-fetch_return32_tok(tokenstr_t *tok, u_char *buf, int len)
-{
- int err = 0;
-
- READ_TOKEN_U_CHAR(buf, len, tok->tt.ret32.status, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.ret32.ret, tok->len, err);
- if (err)
- return (-1);
-
- return (0);
-}
-
-static void
-print_return32_tok(FILE *fp, tokenstr_t *tok, char *del, char raw,
- __unused char sfrm, int xml)
-{
-
- print_tok_type(fp, tok->id, "return", raw, xml);
- if (xml) {
- open_attr(fp ,"errval");
- print_retval(fp, tok->tt.ret32.status, raw);
- close_attr(fp);
- open_attr(fp, "retval");
- print_4_bytes(fp, tok->tt.ret32.ret, "%u");
- close_attr(fp);
- close_tag(fp, tok->id);
- } else {
- print_delim(fp, del);
- print_retval(fp, tok->tt.ret32.status, raw);
- print_delim(fp, del);
- print_4_bytes(fp, tok->tt.ret32.ret, "%u");
- }
-}
-
-static int
-fetch_return64_tok(tokenstr_t *tok, u_char *buf, int len)
-{
- int err = 0;
-
- READ_TOKEN_U_CHAR(buf, len, tok->tt.ret64.err, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT64(buf, len, tok->tt.ret64.val, tok->len, err);
- if (err)
- return (-1);
-
- return (0);
-}
-
-static void
-print_return64_tok(FILE *fp, tokenstr_t *tok, char *del, char raw,
- __unused char sfrm, int xml)
-{
-
- print_tok_type(fp, tok->id, "return", raw, xml);
- if (xml) {
- open_attr(fp, "errval");
- print_retval(fp, tok->tt.ret64.err, raw);
- close_attr(fp);
- open_attr(fp, "retval");
- print_8_bytes(fp, tok->tt.ret64.val, "%lld");
- close_attr(fp);
- close_tag(fp, tok->id);
- } else {
- print_delim(fp, del);
- print_retval(fp, tok->tt.ret64.err, raw);
- print_delim(fp, del);
- print_8_bytes(fp, tok->tt.ret64.val, "%lld");
- }
-}
-
-/*
- * seq 4 bytes
- */
-static int
-fetch_seq_tok(tokenstr_t *tok, u_char *buf, int len)
-{
- int err = 0;
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.seq.seqno, tok->len, err);
- if (err)
- return (-1);
-
- return (0);
-}
-
-static void
-print_seq_tok(FILE *fp, tokenstr_t *tok, char *del, char raw,
- __unused char sfrm, int xml)
-{
-
- print_tok_type(fp, tok->id, "sequence", raw, xml);
- if (xml) {
- open_attr(fp, "seq-num");
- print_4_bytes(fp, tok->tt.seq.seqno, "%u");
- close_attr(fp);
- close_tag(fp, tok->id);
- } else {
- print_delim(fp, del);
- print_4_bytes(fp, tok->tt.seq.seqno, "%u");
- }
-}
-
-/*
- * socket family 2 bytes
- * local port 2 bytes
- * socket address 4 bytes
- */
-static int
-fetch_sock_inet32_tok(tokenstr_t *tok, u_char *buf, int len)
-{
- int err = 0;
-
- READ_TOKEN_U_INT16(buf, len, tok->tt.sockinet32.family, tok->len,
- err);
- if (err)
- return (-1);
-
- READ_TOKEN_BYTES(buf, len, &tok->tt.sockinet32.port,
- sizeof(uint16_t), tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_BYTES(buf, len, &tok->tt.sockinet32.addr,
- sizeof(tok->tt.sockinet32.addr), tok->len, err);
- if (err)
- return (-1);
-
- return (0);
-}
-
-static void
-print_sock_inet32_tok(FILE *fp, tokenstr_t *tok, char *del, char raw,
- __unused char sfrm, int xml)
-{
-
- print_tok_type(fp, tok->id, "socket-inet", raw, xml);
- if (xml) {
- open_attr(fp, "type");
- print_2_bytes(fp, tok->tt.sockinet32.family, "%u");
- close_attr(fp);
- open_attr(fp, "port");
- print_2_bytes(fp, ntohs(tok->tt.sockinet32.port), "%u");
- close_attr(fp);
- open_attr(fp, "addr");
- print_ip_address(fp, tok->tt.sockinet32.addr);
- close_attr(fp);
- close_tag(fp, tok->id);
- } else {
- print_delim(fp, del);
- print_2_bytes(fp, tok->tt.sockinet32.family, "%u");
- print_delim(fp, del);
- print_2_bytes(fp, ntohs(tok->tt.sockinet32.port), "%u");
- print_delim(fp, del);
- print_ip_address(fp, tok->tt.sockinet32.addr);
- }
-}
-
-/*
- * socket family 2 bytes
- * path 104 bytes
- */
-static int
-fetch_sock_unix_tok(tokenstr_t *tok, u_char *buf, int len)
-{
- int err = 0;
-
- READ_TOKEN_U_INT16(buf, len, tok->tt.sockunix.family, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_BYTES(buf, len, tok->tt.sockunix.path, 104, tok->len,
- err);
- if (err)
- return (-1);
-
- return (0);
-}
-
-static void
-print_sock_unix_tok(FILE *fp, tokenstr_t *tok, char *del, char raw,
- __unused char sfrm, int xml)
-{
-
- print_tok_type(fp, tok->id, "socket-unix", raw, xml);
- if (xml) {
- open_attr(fp, "type");
- print_2_bytes(fp, tok->tt.sockunix.family, "%u");
- close_attr(fp);
- open_attr(fp, "port");
- close_attr(fp);
- open_attr(fp, "addr");
- print_string(fp, tok->tt.sockunix.path,
- strlen(tok->tt.sockunix.path));
- close_attr(fp);
- close_tag(fp, tok->id);
- } else {
- print_delim(fp, del);
- print_2_bytes(fp, tok->tt.sockunix.family, "%u");
- print_delim(fp, del);
- print_string(fp, tok->tt.sockunix.path,
- strlen(tok->tt.sockunix.path));
- }
-}
-
-/*
- * socket type 2 bytes
- * local port 2 bytes
- * local address 4 bytes
- * remote port 2 bytes
- * remote address 4 bytes
- */
-static int
-fetch_socket_tok(tokenstr_t *tok, u_char *buf, int len)
-{
- int err = 0;
-
- READ_TOKEN_U_INT16(buf, len, tok->tt.socket.type, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_BYTES(buf, len, &tok->tt.socket.l_port, sizeof(uint16_t),
- tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_BYTES(buf, len, &tok->tt.socket.l_addr,
- sizeof(tok->tt.socket.l_addr), tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_BYTES(buf, len, &tok->tt.socket.r_port, sizeof(uint16_t),
- tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_BYTES(buf, len, &tok->tt.socket.l_addr,
- sizeof(tok->tt.socket.r_addr), tok->len, err);
- if (err)
- return (-1);
-
- return (0);
-}
-
-static void
-print_socket_tok(FILE *fp, tokenstr_t *tok, char *del, char raw,
- __unused char sfrm, int xml)
-{
-
- print_tok_type(fp, tok->id, "socket", raw, xml);
- if (xml) {
- open_attr(fp, "sock_type");
- print_2_bytes(fp, tok->tt.socket.type, "%u");
- close_attr(fp);
- open_attr(fp, "lport");
- print_2_bytes(fp, ntohs(tok->tt.socket.l_port), "%u");
- close_attr(fp);
- open_attr(fp, "laddr");
- print_ip_address(fp, tok->tt.socket.l_addr);
- close_attr(fp);
- open_attr(fp, "fport");
- print_2_bytes(fp, ntohs(tok->tt.socket.r_port), "%u");
- close_attr(fp);
- open_attr(fp, "faddr");
- print_ip_address(fp, tok->tt.socket.r_addr);
- close_attr(fp);
- close_tag(fp, tok->id);
- } else {
- print_delim(fp, del);
- print_2_bytes(fp, tok->tt.socket.type, "%u");
- print_delim(fp, del);
- print_2_bytes(fp, ntohs(tok->tt.socket.l_port), "%u");
- print_delim(fp, del);
- print_ip_address(fp, tok->tt.socket.l_addr);
- print_delim(fp, del);
- print_2_bytes(fp, ntohs(tok->tt.socket.r_port), "%u");
- print_delim(fp, del);
- print_ip_address(fp, tok->tt.socket.r_addr);
- }
-}
-
-/*
- * audit ID 4 bytes
- * euid 4 bytes
- * egid 4 bytes
- * ruid 4 bytes
- * rgid 4 bytes
- * pid 4 bytes
- * sessid 4 bytes
- * terminal ID
- * portid 4 bytes/8 bytes (32-bit/64-bit value)
- * machine id 4 bytes
- */
-static int
-fetch_subject32_tok(tokenstr_t *tok, u_char *buf, int len)
-{
- int err = 0;
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.subj32.auid, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.subj32.euid, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.subj32.egid, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.subj32.ruid, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.subj32.rgid, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.subj32.pid, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.subj32.sid, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.subj32.tid.port, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_BYTES(buf, len, &tok->tt.subj32.tid.addr,
- sizeof(tok->tt.subj32.tid.addr), tok->len, err);
- if (err)
- return (-1);
-
- return (0);
-}
-
-static void
-print_subject32_tok(FILE *fp, tokenstr_t *tok, char *del, char raw,
- __unused char sfrm, int xml)
-{
-
- print_tok_type(fp, tok->id, "subject", raw, xml);
- if (xml) {
- open_attr(fp, "audit-uid");
- print_user(fp, tok->tt.subj32.auid, raw);
- close_attr(fp);
- open_attr(fp, "uid");
- print_user(fp, tok->tt.subj32.euid, raw);
- close_attr(fp);
- open_attr(fp, "gid");
- print_group(fp, tok->tt.subj32.egid, raw);
- close_attr(fp);
- open_attr(fp, "ruid");
- print_user(fp, tok->tt.subj32.ruid, raw);
- close_attr(fp);
- open_attr(fp, "rgid");
- print_group(fp, tok->tt.subj32.rgid, raw);
- close_attr(fp);
- open_attr(fp,"pid");
- print_4_bytes(fp, tok->tt.subj32.pid, "%u");
- close_attr(fp);
- open_attr(fp,"sid");
- print_4_bytes(fp, tok->tt.subj32.sid, "%u");
- close_attr(fp);
- open_attr(fp,"tid");
- print_4_bytes(fp, tok->tt.subj32.tid.port, "%u ");
- print_ip_address(fp, tok->tt.subj32.tid.addr);
- close_attr(fp);
- close_tag(fp, tok->id);
- } else {
- print_delim(fp, del);
- print_user(fp, tok->tt.subj32.auid, raw);
- print_delim(fp, del);
- print_user(fp, tok->tt.subj32.euid, raw);
- print_delim(fp, del);
- print_group(fp, tok->tt.subj32.egid, raw);
- print_delim(fp, del);
- print_user(fp, tok->tt.subj32.ruid, raw);
- print_delim(fp, del);
- print_group(fp, tok->tt.subj32.rgid, raw);
- print_delim(fp, del);
- print_4_bytes(fp, tok->tt.subj32.pid, "%u");
- print_delim(fp, del);
- print_4_bytes(fp, tok->tt.subj32.sid, "%u");
- print_delim(fp, del);
- print_4_bytes(fp, tok->tt.subj32.tid.port, "%u");
- print_delim(fp, del);
- print_ip_address(fp, tok->tt.subj32.tid.addr);
- }
-}
-
-/*
- * audit ID 4 bytes
- * euid 4 bytes
- * egid 4 bytes
- * ruid 4 bytes
- * rgid 4 bytes
- * pid 4 bytes
- * sessid 4 bytes
- * terminal ID
- * portid 4 bytes/8 bytes (32-bit/64-bit value)
- * machine id 4 bytes
- */
-static int
-fetch_subject64_tok(tokenstr_t *tok, u_char *buf, int len)
-{
- int err = 0;
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.subj64.auid, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.subj64.euid, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.subj64.egid, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.subj64.ruid, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.subj64.rgid, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.subj64.pid, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.subj64.sid, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT64(buf, len, tok->tt.subj64.tid.port, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_BYTES(buf, len, &tok->tt.subj64.tid.addr,
- sizeof(tok->tt.subj64.tid.addr), tok->len, err);
- if (err)
- return (-1);
-
- return (0);
-}
-
-static void
-print_subject64_tok(FILE *fp, tokenstr_t *tok, char *del, char raw,
- __unused char sfrm, int xml)
-{
-
- print_tok_type(fp, tok->id, "subject", raw, xml);
- if (xml) {
- open_attr(fp, "audit-uid");
- print_user(fp, tok->tt.subj64.auid, raw);
- close_attr(fp);
- open_attr(fp, "uid");
- print_user(fp, tok->tt.subj64.euid, raw);
- close_attr(fp);
- open_attr(fp, "gid");
- print_group(fp, tok->tt.subj64.egid, raw);
- close_attr(fp);
- open_attr(fp, "ruid");
- print_user(fp, tok->tt.subj64.ruid, raw);
- close_attr(fp);
- open_attr(fp, "rgid");
- print_group(fp, tok->tt.subj64.rgid, raw);
- close_attr(fp);
- open_attr(fp, "pid");
- print_4_bytes(fp, tok->tt.subj64.pid, "%u");
- close_attr(fp);
- open_attr(fp, "sid");
- print_4_bytes(fp, tok->tt.subj64.sid, "%u");
- close_attr(fp);
- open_attr(fp, "tid");
- print_8_bytes(fp, tok->tt.subj64.tid.port, "%llu");
- print_ip_address(fp, tok->tt.subj64.tid.addr);
- close_attr(fp);
- close_tag(fp, tok->id);
- } else {
- print_delim(fp, del);
- print_user(fp, tok->tt.subj64.auid, raw);
- print_delim(fp, del);
- print_user(fp, tok->tt.subj64.euid, raw);
- print_delim(fp, del);
- print_group(fp, tok->tt.subj64.egid, raw);
- print_delim(fp, del);
- print_user(fp, tok->tt.subj64.ruid, raw);
- print_delim(fp, del);
- print_group(fp, tok->tt.subj64.rgid, raw);
- print_delim(fp, del);
- print_4_bytes(fp, tok->tt.subj64.pid, "%u");
- print_delim(fp, del);
- print_4_bytes(fp, tok->tt.subj64.sid, "%u");
- print_delim(fp, del);
- print_8_bytes(fp, tok->tt.subj64.tid.port, "%llu");
- print_delim(fp, del);
- print_ip_address(fp, tok->tt.subj64.tid.addr);
- }
-}
-
-/*
- * audit ID 4 bytes
- * euid 4 bytes
- * egid 4 bytes
- * ruid 4 bytes
- * rgid 4 bytes
- * pid 4 bytes
- * sessid 4 bytes
- * terminal ID
- * portid 4 bytes
- * type 4 bytes
- * machine id 16 bytes
- */
-static int
-fetch_subject32ex_tok(tokenstr_t *tok, u_char *buf, int len)
-{
- int err = 0;
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.subj32_ex.auid, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.subj32_ex.euid, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.subj32_ex.egid, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.subj32_ex.ruid, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.subj32_ex.rgid, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.subj32_ex.pid, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.subj32_ex.sid, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.subj32_ex.tid.port, tok->len,
- err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.subj32_ex.tid.type, tok->len,
- err);
- if (err)
- return (-1);
-
- if (tok->tt.subj32_ex.tid.type == AU_IPv4) {
- READ_TOKEN_BYTES(buf, len, &tok->tt.subj32_ex.tid.addr[0],
- sizeof(tok->tt.subj32_ex.tid.addr[0]), tok->len, err);
- if (err)
- return (-1);
- } else if (tok->tt.subj32_ex.tid.type == AU_IPv6) {
- READ_TOKEN_BYTES(buf, len, tok->tt.subj32_ex.tid.addr,
- sizeof(tok->tt.subj32_ex.tid.addr), tok->len, err);
- if (err)
- return (-1);
- } else
- return (-1);
-
- return (0);
-}
-
-static void
-print_subject32ex_tok(FILE *fp, tokenstr_t *tok, char *del, char raw,
- __unused char sfrm, int xml)
-{
-
- print_tok_type(fp, tok->id, "subject_ex", raw, xml);
- if (xml) {
- open_attr(fp, "audit-uid");
- print_user(fp, tok->tt.subj32_ex.auid, raw);
- close_attr(fp);
- open_attr(fp, "uid");
- print_user(fp, tok->tt.subj32_ex.euid, raw);
- close_attr(fp);
- open_attr(fp, "gid");
- print_group(fp, tok->tt.subj32_ex.egid, raw);
- close_attr(fp);
- open_attr(fp, "ruid");
- print_user(fp, tok->tt.subj32_ex.ruid, raw);
- close_attr(fp);
- open_attr(fp, "rgid");
- print_group(fp, tok->tt.subj32_ex.rgid, raw);
- close_attr(fp);
- open_attr(fp, "pid");
- print_4_bytes(fp, tok->tt.subj32_ex.pid, "%u");
- close_attr(fp);
- open_attr(fp, "sid");
- print_4_bytes(fp, tok->tt.subj32_ex.sid, "%u");
- close_attr(fp);
- open_attr(fp, "tid");
- print_4_bytes(fp, tok->tt.subj32_ex.tid.port, "%u");
- print_ip_ex_address(fp, tok->tt.subj32_ex.tid.type,
- tok->tt.subj32_ex.tid.addr);
- close_attr(fp);
- close_tag(fp, tok->id);
- } else {
- print_delim(fp, del);
- print_user(fp, tok->tt.subj32_ex.auid, raw);
- print_delim(fp, del);
- print_user(fp, tok->tt.subj32_ex.euid, raw);
- print_delim(fp, del);
- print_group(fp, tok->tt.subj32_ex.egid, raw);
- print_delim(fp, del);
- print_user(fp, tok->tt.subj32_ex.ruid, raw);
- print_delim(fp, del);
- print_group(fp, tok->tt.subj32_ex.rgid, raw);
- print_delim(fp, del);
- print_4_bytes(fp, tok->tt.subj32_ex.pid, "%u");
- print_delim(fp, del);
- print_4_bytes(fp, tok->tt.subj32_ex.sid, "%u");
- print_delim(fp, del);
- print_4_bytes(fp, tok->tt.subj32_ex.tid.port, "%u");
- print_delim(fp, del);
- print_ip_ex_address(fp, tok->tt.subj32_ex.tid.type,
- tok->tt.subj32_ex.tid.addr);
- }
-}
-
-/*
- * audit ID 4 bytes
- * euid 4 bytes
- * egid 4 bytes
- * ruid 4 bytes
- * rgid 4 bytes
- * pid 4 bytes
- * sessid 4 bytes
- * terminal ID
- * portid 8 bytes
- * type 4 bytes
- * machine id 16 bytes
- */
-static int
-fetch_subject64ex_tok(tokenstr_t *tok, u_char *buf, int len)
-{
- int err = 0;
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.subj64_ex.auid, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.subj64_ex.euid, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.subj64_ex.egid, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.subj64_ex.ruid, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.subj64_ex.rgid, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.subj64_ex.pid, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.subj64_ex.sid, tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT64(buf, len, tok->tt.subj64_ex.tid.port, tok->len,
- err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.subj64_ex.tid.type, tok->len,
- err);
- if (err)
- return (-1);
-
- if (tok->tt.subj64_ex.tid.type == AU_IPv4) {
- READ_TOKEN_BYTES(buf, len, &tok->tt.subj64_ex.tid.addr[0],
- sizeof(tok->tt.subj64_ex.tid.addr[0]), tok->len, err);
- if (err)
- return (-1);
- } else if (tok->tt.subj64_ex.tid.type == AU_IPv6) {
- READ_TOKEN_BYTES(buf, len, tok->tt.subj64_ex.tid.addr,
- sizeof(tok->tt.subj64_ex.tid.addr), tok->len, err);
- if (err)
- return (-1);
- } else
- return (-1);
-
- return (0);
-}
-
-static void
-print_subject64ex_tok(FILE *fp, tokenstr_t *tok, char *del, char raw,
- __unused char sfrm, int xml)
-{
- print_tok_type(fp, tok->id, "subject_ex", raw, xml);
- if (xml) {
- open_attr(fp, "audit-uid");
- print_user(fp, tok->tt.subj64_ex.auid, raw);
- close_attr(fp);
- open_attr(fp, "uid");
- print_user(fp, tok->tt.subj64_ex.euid, raw);
- close_attr(fp);
- open_attr(fp, "gid");
- print_group(fp, tok->tt.subj64_ex.egid, raw);
- close_attr(fp);
- open_attr(fp, "ruid");
- print_user(fp, tok->tt.subj64_ex.ruid, raw);
- close_attr(fp);
- open_attr(fp, "rgid");
- print_group(fp, tok->tt.subj64_ex.rgid, raw);
- close_attr(fp);
- open_attr(fp, "pid");
- print_4_bytes(fp, tok->tt.subj64_ex.pid, "%u");
- close_attr(fp);
- open_attr(fp, "sid");
- print_4_bytes(fp, tok->tt.subj64_ex.sid, "%u");
- close_attr(fp);
- open_attr(fp, "tid");
- print_8_bytes(fp, tok->tt.subj64_ex.tid.port, "%llu");
- print_ip_ex_address(fp, tok->tt.subj64_ex.tid.type,
- tok->tt.subj64_ex.tid.addr);
- close_attr(fp);
- close_tag(fp, tok->id);
- } else {
- print_delim(fp, del);
- print_user(fp, tok->tt.subj64_ex.auid, raw);
- print_delim(fp, del);
- print_user(fp, tok->tt.subj64_ex.euid, raw);
- print_delim(fp, del);
- print_group(fp, tok->tt.subj64_ex.egid, raw);
- print_delim(fp, del);
- print_user(fp, tok->tt.subj64_ex.ruid, raw);
- print_delim(fp, del);
- print_group(fp, tok->tt.subj64_ex.rgid, raw);
- print_delim(fp, del);
- print_4_bytes(fp, tok->tt.subj64_ex.pid, "%u");
- print_delim(fp, del);
- print_4_bytes(fp, tok->tt.subj64_ex.sid, "%u");
- print_delim(fp, del);
- print_8_bytes(fp, tok->tt.subj64_ex.tid.port, "%llu");
- print_delim(fp, del);
- print_ip_ex_address(fp, tok->tt.subj64_ex.tid.type,
- tok->tt.subj64_ex.tid.addr);
- }
-}
-
-/*
- * size 2 bytes
- * data size bytes
- */
-static int
-fetch_text_tok(tokenstr_t *tok, u_char *buf, int len)
-{
- int err = 0;
-
- READ_TOKEN_U_INT16(buf, len, tok->tt.text.len, tok->len, err);
- if (err)
- return (-1);
-
- SET_PTR((char*)buf, len, tok->tt.text.text, tok->tt.text.len, tok->len,
- err);
- if (err)
- return (-1);
-
- return (0);
-}
-
-static void
-print_text_tok(FILE *fp, tokenstr_t *tok, char *del, char raw,
- __unused char sfrm, int xml)
-{
-
- print_tok_type(fp, tok->id, "text", raw, xml);
- if (xml) {
- print_string(fp, tok->tt.text.text, tok->tt.text.len);
- close_tag(fp, tok->id);
- } else {
- print_delim(fp, del);
- print_string(fp, tok->tt.text.text, tok->tt.text.len);
- }
-}
-
-/*
- * socket type 2 bytes
- * local port 2 bytes
- * address type/length 4 bytes
- * local Internet address 4 bytes
- * remote port 4 bytes
- * address type/length 4 bytes
- * remote Internet address 4 bytes
- */
-static int
-fetch_socketex32_tok(tokenstr_t *tok, u_char *buf, int len)
-{
- int err = 0;
-
- READ_TOKEN_U_INT16(buf, len, tok->tt.socket_ex32.type, tok->len,
- err);
- if (err)
- return (-1);
-
- READ_TOKEN_BYTES(buf, len, &tok->tt.socket_ex32.l_port,
- sizeof(uint16_t), tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.socket_ex32.l_ad_type, tok->len,
- err);
- if (err)
- return (-1);
-
- READ_TOKEN_BYTES(buf, len, &tok->tt.socket_ex32.l_addr,
- sizeof(tok->tt.socket_ex32.l_addr), tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_BYTES(buf, len, &tok->tt.socket_ex32.r_port,
- sizeof(uint16_t), tok->len, err);
- if (err)
- return (-1);
-
- READ_TOKEN_U_INT32(buf, len, tok->tt.socket_ex32.r_ad_type, tok->len,
- err);
- if (err)
- return (-1);
-
- READ_TOKEN_BYTES(buf, len, &tok->tt.socket_ex32.r_addr,
- sizeof(tok->tt.socket_ex32.r_addr), tok->len, err);
- if (err)
- return (-1);
-
- return (0);
-}
-
-static void
-print_socketex32_tok(FILE *fp, tokenstr_t *tok, char *del, char raw,
- __unused char sfrm, int xml)
-{
-
- print_tok_type(fp, tok->id, "socket", raw, xml);
- if (xml) {
- open_attr(fp, "sock_type");
- print_2_bytes(fp, tok->tt.socket_ex32.type, "%#x");
- close_attr(fp);
- open_attr(fp, "lport");
- print_2_bytes(fp, ntohs(tok->tt.socket_ex32.l_port), "%#x");
- close_attr(fp);
- open_attr(fp, "laddr");
- print_ip_address(fp, tok->tt.socket_ex32.l_addr);
- close_attr(fp);
- open_attr(fp, "faddr");
- print_ip_address(fp, tok->tt.socket_ex32.r_addr);
- close_attr(fp);
- open_attr(fp, "fport");
- print_2_bytes(fp, tok->tt.socket_ex32.type, "%#x");
- close_attr(fp);
- close_tag(fp, tok->id);
- } else {
- print_delim(fp, del);
- print_2_bytes(fp, tok->tt.socket_ex32.type, "%#x");
- print_delim(fp, del);
- print_2_bytes(fp, ntohs(tok->tt.socket_ex32.l_port), "%#x");
- print_delim(fp, del);
- print_ip_address(fp, tok->tt.socket_ex32.l_addr);
- print_delim(fp, del);
- print_4_bytes(fp, ntohs(tok->tt.socket_ex32.r_port), "%#x");
- print_delim(fp, del);
- print_ip_address(fp, tok->tt.socket_ex32.r_addr);
- }
-}
-
-static int
-fetch_invalid_tok(tokenstr_t *tok, u_char *buf, int len)
-{
- int err = 0;
- int recoversize;
-
- recoversize = len - (tok->len + AUDIT_TRAILER_SIZE);
- if (recoversize <= 0)
- return (-1);
-
- tok->tt.invalid.length = recoversize;
-
- SET_PTR((char*)buf, len, tok->tt.invalid.data, recoversize, tok->len,
- err);
- if (err)
- return (-1);
-
- return (0);
-}
-
-static void
-print_invalid_tok(FILE *fp, tokenstr_t *tok, char *del, char raw,
- __unused char sfrm, int xml)
-{
-
- if (!xml) {
- print_tok_type(fp, tok->id, "unknown", raw, 0);
- print_delim(fp, del);
- print_mem(fp, (u_char*)tok->tt.invalid.data,
- tok->tt.invalid.length);
- }
-}
-
-
-/*
- * size 2 bytes;
- * zonename size bytes;
- */
-static int
-fetch_zonename_tok(tokenstr_t *tok, u_char *buf, int len)
-{
- int err = 0;
-
- READ_TOKEN_U_INT16(buf, len, tok->tt.zonename.len, tok->len, err);
- if (err)
- return (-1);
- SET_PTR((char *)buf, len, tok->tt.zonename.zonename, tok->tt.zonename.len,
- tok->len, err);
- if (err)
- return (-1);
- return (0);
-}
-
-static void
-print_zonename_tok(FILE *fp, tokenstr_t *tok, char *del, char raw,
- __unused char sfrm, int xml)
-{
-
- print_tok_type(fp, tok->id, "zone", raw, xml);
- if (xml) {
- open_attr(fp, "name");
- print_string(fp, tok->tt.zonename.zonename,
- tok->tt.zonename.len);
- close_attr(fp);
- close_tag(fp, tok->id);
- } else {
- print_delim(fp, del);
- print_string(fp, tok->tt.zonename.zonename,
- tok->tt.zonename.len);
- }
-}
-
-/*
- * Reads the token beginning at buf into tok.
- */
-int
-au_fetch_tok(tokenstr_t *tok, u_char *buf, int len)
-{
-
- if (len <= 0)
- return (-1);
-
- tok->len = 1;
- tok->data = buf;
- tok->id = *buf;
-
- switch(tok->id) {
- case AUT_HEADER32:
- return (fetch_header32_tok(tok, buf, len));
-
- case AUT_HEADER32_EX:
- return (fetch_header32_ex_tok(tok, buf, len));
-
- case AUT_HEADER64:
- return (fetch_header64_tok(tok, buf, len));
-
- case AUT_HEADER64_EX:
- return (fetch_header64_ex_tok(tok, buf, len));
-
- case AUT_TRAILER:
- return (fetch_trailer_tok(tok, buf, len));
-
- case AUT_ARG32:
- return (fetch_arg32_tok(tok, buf, len));
-
- case AUT_ARG64:
- return (fetch_arg64_tok(tok, buf, len));
-
- case AUT_ATTR32:
- return (fetch_attr32_tok(tok, buf, len));
-
- case AUT_ATTR64:
- return (fetch_attr64_tok(tok, buf, len));
-
- case AUT_EXIT:
- return (fetch_exit_tok(tok, buf, len));
-
- case AUT_EXEC_ARGS:
- return (fetch_execarg_tok(tok, buf, len));
-
- case AUT_EXEC_ENV:
- return (fetch_execenv_tok(tok, buf, len));
-
- case AUT_OTHER_FILE32:
- return (fetch_file_tok(tok, buf, len));
-
- case AUT_NEWGROUPS:
- return (fetch_newgroups_tok(tok, buf, len));
-
- case AUT_IN_ADDR:
- return (fetch_inaddr_tok(tok, buf, len));
-
- case AUT_IN_ADDR_EX:
- return (fetch_inaddr_ex_tok(tok, buf, len));
-
- case AUT_IP:
- return (fetch_ip_tok(tok, buf, len));
-
- case AUT_IPC:
- return (fetch_ipc_tok(tok, buf, len));
-
- case AUT_IPC_PERM:
- return (fetch_ipcperm_tok(tok, buf, len));
-
- case AUT_IPORT:
- return (fetch_iport_tok(tok, buf, len));
-
- case AUT_OPAQUE:
- return (fetch_opaque_tok(tok, buf, len));
-
- case AUT_PATH:
- return (fetch_path_tok(tok, buf, len));
-
- case AUT_PROCESS32:
- return (fetch_process32_tok(tok, buf, len));
-
- case AUT_PROCESS32_EX:
- return (fetch_process32ex_tok(tok, buf, len));
-
- case AUT_PROCESS64:
- return (fetch_process64_tok(tok, buf, len));
-
- case AUT_PROCESS64_EX:
- return (fetch_process64ex_tok(tok, buf, len));
-
- case AUT_RETURN32:
- return (fetch_return32_tok(tok, buf, len));
-
- case AUT_RETURN64:
- return (fetch_return64_tok(tok, buf, len));
-
- case AUT_SEQ:
- return (fetch_seq_tok(tok, buf, len));
-
- case AUT_SOCKET:
- return (fetch_socket_tok(tok, buf, len));
-
- case AUT_SOCKINET32:
- return (fetch_sock_inet32_tok(tok, buf, len));
-
- case AUT_SOCKUNIX:
- return (fetch_sock_unix_tok(tok, buf, len));
-
- case AUT_SUBJECT32:
- return (fetch_subject32_tok(tok, buf, len));
-
- case AUT_SUBJECT32_EX:
- return (fetch_subject32ex_tok(tok, buf, len));
-
- case AUT_SUBJECT64:
- return (fetch_subject64_tok(tok, buf, len));
-
- case AUT_SUBJECT64_EX:
- return (fetch_subject64ex_tok(tok, buf, len));
-
- case AUT_TEXT:
- return (fetch_text_tok(tok, buf, len));
-
- case AUT_SOCKET_EX:
- return (fetch_socketex32_tok(tok, buf, len));
-
- case AUT_DATA:
- return (fetch_arb_tok(tok, buf, len));
-
- case AUT_ZONENAME:
- return (fetch_zonename_tok(tok, buf, len));
-
- default:
- return (fetch_invalid_tok(tok, buf, len));
- }
-}
-
-/*
- * 'prints' the token out to outfp.
- */
-void
-au_print_tok(FILE *outfp, tokenstr_t *tok, char *del, char raw, char sfrm)
-{
-
- switch(tok->id) {
- case AUT_HEADER32:
- print_header32_tok(outfp, tok, del, raw, sfrm, AU_PLAIN);
- return;
-
- case AUT_HEADER32_EX:
- print_header32_ex_tok(outfp, tok, del, raw, sfrm, AU_PLAIN);
- return;
-
- case AUT_HEADER64:
- print_header64_tok(outfp, tok, del, raw, sfrm, AU_PLAIN);
- return;
-
- case AUT_HEADER64_EX:
- print_header64_ex_tok(outfp, tok, del, raw, sfrm, AU_PLAIN);
- return;
-
- case AUT_TRAILER:
- print_trailer_tok(outfp, tok, del, raw, sfrm, AU_PLAIN);
- return;
-
- case AUT_ARG32:
- print_arg32_tok(outfp, tok, del, raw, sfrm, AU_PLAIN);
- return;
-
- case AUT_ARG64:
- print_arg64_tok(outfp, tok, del, raw, sfrm, AU_PLAIN);
- return;
-
- case AUT_DATA:
- print_arb_tok(outfp, tok, del, raw, sfrm, AU_PLAIN);
- return;
-
- case AUT_ATTR32:
- print_attr32_tok(outfp, tok, del, raw, sfrm, AU_PLAIN);
- return;
-
- case AUT_ATTR64:
- print_attr64_tok(outfp, tok, del, raw, sfrm, AU_PLAIN);
- return;
-
- case AUT_EXIT:
- print_exit_tok(outfp, tok, del, raw, sfrm, AU_PLAIN);
- return;
-
- case AUT_EXEC_ARGS:
- print_execarg_tok(outfp, tok, del, raw, sfrm, AU_PLAIN);
- return;
-
- case AUT_EXEC_ENV:
- print_execenv_tok(outfp, tok, del, raw, sfrm, AU_PLAIN);
- return;
-
- case AUT_OTHER_FILE32:
- print_file_tok(outfp, tok, del, raw, sfrm, AU_PLAIN);
- return;
-
- case AUT_NEWGROUPS:
- print_newgroups_tok(outfp, tok, del, raw, sfrm, AU_PLAIN);
- return;
-
- case AUT_IN_ADDR:
- print_inaddr_tok(outfp, tok, del, raw, sfrm, AU_PLAIN);
- return;
-
- case AUT_IN_ADDR_EX:
- print_inaddr_ex_tok(outfp, tok, del, raw, sfrm, AU_PLAIN);
- return;
-
- case AUT_IP:
- print_ip_tok(outfp, tok, del, raw, sfrm, AU_PLAIN);
- return;
-
- case AUT_IPC:
- print_ipc_tok(outfp, tok, del, raw, sfrm, AU_PLAIN);
- return;
-
- case AUT_IPC_PERM:
- print_ipcperm_tok(outfp, tok, del, raw, sfrm, AU_PLAIN);
- return;
-
- case AUT_IPORT:
- print_iport_tok(outfp, tok, del, raw, sfrm, AU_PLAIN);
- return;
-
- case AUT_OPAQUE:
- print_opaque_tok(outfp, tok, del, raw, sfrm, AU_PLAIN);
- return;
-
- case AUT_PATH:
- print_path_tok(outfp, tok, del, raw, sfrm, AU_PLAIN);
- return;
-
- case AUT_PROCESS32:
- print_process32_tok(outfp, tok, del, raw, sfrm, AU_PLAIN);
- return;
-
- case AUT_PROCESS32_EX:
- print_process32ex_tok(outfp, tok, del, raw, sfrm, AU_PLAIN);
- return;
-
- case AUT_PROCESS64:
- print_process64_tok(outfp, tok, del, raw, sfrm, AU_PLAIN);
- return;
-
- case AUT_PROCESS64_EX:
- print_process64ex_tok(outfp, tok, del, raw, sfrm, AU_PLAIN);
- return;
-
- case AUT_RETURN32:
- print_return32_tok(outfp, tok, del, raw, sfrm, AU_PLAIN);
- return;
-
- case AUT_RETURN64:
- print_return64_tok(outfp, tok, del, raw, sfrm, AU_PLAIN);
- return;
-
- case AUT_SEQ:
- print_seq_tok(outfp, tok, del, raw, sfrm, AU_PLAIN);
- return;
-
- case AUT_SOCKET:
- print_socket_tok(outfp, tok, del, raw, sfrm, AU_PLAIN);
- return;
-
- case AUT_SOCKINET32:
- print_sock_inet32_tok(outfp, tok, del, raw, sfrm, AU_PLAIN);
- return;
-
- case AUT_SOCKUNIX:
- print_sock_unix_tok(outfp, tok, del, raw, sfrm, AU_PLAIN);
- return;
-
- case AUT_SUBJECT32:
- print_subject32_tok(outfp, tok, del, raw, sfrm, AU_PLAIN);
- return;
-
- case AUT_SUBJECT64:
- print_subject64_tok(outfp, tok, del, raw, sfrm, AU_PLAIN);
- return;
-
- case AUT_SUBJECT32_EX:
- print_subject32ex_tok(outfp, tok, del, raw, sfrm, AU_PLAIN);
- return;
-
- case AUT_SUBJECT64_EX:
- print_subject64ex_tok(outfp, tok, del, raw, sfrm, AU_PLAIN);
- return;
-
- case AUT_TEXT:
- print_text_tok(outfp, tok, del, raw, sfrm, AU_PLAIN);
- return;
-
- case AUT_SOCKET_EX:
- print_socketex32_tok(outfp, tok, del, raw, sfrm, AU_PLAIN);
- return;
-
- case AUT_ZONENAME:
- print_zonename_tok(outfp, tok, del, raw, sfrm, AU_PLAIN);
- return;
-
- default:
- print_invalid_tok(outfp, tok, del, raw, sfrm, AU_PLAIN);
- }
-}
-
-/*
- * 'prints' the token out to outfp in XML format.
- */
-void
-au_print_tok_xml(FILE *outfp, tokenstr_t *tok, char *del, char raw,
- char sfrm)
-{
-
- switch(tok->id) {
- case AUT_HEADER32:
- print_header32_tok(outfp, tok, del, raw, sfrm, AU_XML);
- return;
-
- case AUT_HEADER32_EX:
- print_header32_ex_tok(outfp, tok, del, raw, sfrm, AU_XML);
- return;
-
- case AUT_HEADER64:
- print_header64_tok(outfp, tok, del, raw, sfrm, AU_XML);
- return;
-
- case AUT_HEADER64_EX:
- print_header64_ex_tok(outfp, tok, del, raw, sfrm, AU_XML);
- return;
-
- case AUT_TRAILER:
- print_trailer_tok(outfp, tok, del, raw, sfrm, AU_XML);
- return;
-
- case AUT_ARG32:
- print_arg32_tok(outfp, tok, del, raw, sfrm, AU_XML);
- return;
-
- case AUT_ARG64:
- print_arg64_tok(outfp, tok, del, raw, sfrm, AU_XML);
- return;
-
- case AUT_DATA:
- print_arb_tok(outfp, tok, del, raw, sfrm, AU_XML);
- return;
-
- case AUT_ATTR32:
- print_attr32_tok(outfp, tok, del, raw, sfrm, AU_XML);
- return;
-
- case AUT_ATTR64:
- print_attr64_tok(outfp, tok, del, raw, sfrm, AU_XML);
- return;
-
- case AUT_EXIT:
- print_exit_tok(outfp, tok, del, raw, sfrm, AU_XML);
- return;
-
- case AUT_EXEC_ARGS:
- print_execarg_tok(outfp, tok, del, raw, sfrm, AU_XML);
- return;
-
- case AUT_EXEC_ENV:
- print_execenv_tok(outfp, tok, del, raw, sfrm, AU_XML);
- return;
-
- case AUT_OTHER_FILE32:
- print_file_tok(outfp, tok, del, raw, sfrm, AU_XML);
- return;
-
- case AUT_NEWGROUPS:
- print_newgroups_tok(outfp, tok, del, raw, sfrm, AU_XML);
- return;
-
- case AUT_IN_ADDR:
- print_inaddr_tok(outfp, tok, del, raw, sfrm, AU_XML);
- return;
-
- case AUT_IN_ADDR_EX:
- print_inaddr_ex_tok(outfp, tok, del, raw, sfrm, AU_XML);
- return;
-
- case AUT_IP:
- print_ip_tok(outfp, tok, del, raw, sfrm, AU_XML);
- return;
-
- case AUT_IPC:
- print_ipc_tok(outfp, tok, del, raw, sfrm, AU_XML);
- return;
-
- case AUT_IPC_PERM:
- print_ipcperm_tok(outfp, tok, del, raw, sfrm, AU_XML);
- return;
-
- case AUT_IPORT:
- print_iport_tok(outfp, tok, del, raw, sfrm, AU_XML);
- return;
-
- case AUT_OPAQUE:
- print_opaque_tok(outfp, tok, del, raw, sfrm, AU_XML);
- return;
-
- case AUT_PATH:
- print_path_tok(outfp, tok, del, raw, sfrm, AU_XML);
- return;
-
- case AUT_PROCESS32:
- print_process32_tok(outfp, tok, del, raw, sfrm, AU_XML);
- return;
-
- case AUT_PROCESS32_EX:
- print_process32ex_tok(outfp, tok, del, raw, sfrm, AU_XML);
- return;
-
- case AUT_PROCESS64:
- print_process64_tok(outfp, tok, del, raw, sfrm, AU_XML);
- return;
-
- case AUT_PROCESS64_EX:
- print_process64ex_tok(outfp, tok, del, raw, sfrm, AU_XML);
- return;
-
- case AUT_RETURN32:
- print_return32_tok(outfp, tok, del, raw, sfrm, AU_XML);
- return;
-
- case AUT_RETURN64:
- print_return64_tok(outfp, tok, del, raw, sfrm, AU_XML);
- return;
-
- case AUT_SEQ:
- print_seq_tok(outfp, tok, del, raw, sfrm, AU_XML);
- return;
-
- case AUT_SOCKET:
- print_socket_tok(outfp, tok, del, raw, sfrm, AU_XML);
- return;
-
- case AUT_SOCKINET32:
- print_sock_inet32_tok(outfp, tok, del, raw, sfrm, AU_XML);
- return;
-
- case AUT_SOCKUNIX:
- print_sock_unix_tok(outfp, tok, del, raw, sfrm, AU_XML);
- return;
-
- case AUT_SUBJECT32:
- print_subject32_tok(outfp, tok, del, raw, sfrm, AU_XML);
- return;
-
- case AUT_SUBJECT64:
- print_subject64_tok(outfp, tok, del, raw, sfrm, AU_XML);
- return;
-
- case AUT_SUBJECT32_EX:
- print_subject32ex_tok(outfp, tok, del, raw, sfrm, AU_XML);
- return;
-
- case AUT_SUBJECT64_EX:
- print_subject64ex_tok(outfp, tok, del, raw, sfrm, AU_XML);
- return;
-
- case AUT_TEXT:
- print_text_tok(outfp, tok, del, raw, sfrm, AU_XML);
- return;
-
- case AUT_SOCKET_EX:
- print_socketex32_tok(outfp, tok, del, raw, sfrm, AU_XML);
- return;
-
- case AUT_ZONENAME:
- print_zonename_tok(outfp, tok, del, raw, sfrm, AU_XML);
- return;
-
- default:
- print_invalid_tok(outfp, tok, del, raw, sfrm, AU_XML);
- }
-}
-
-/*
- * Read a record from the file pointer, store data in buf memory for buf is
- * also allocated in this function and has to be free'd outside this call.
- *
- * au_read_rec() handles two possibilities: a stand-alone file token, or a
- * complete audit record.
- *
- * XXXRW: Note that if we hit an error, we leave the stream in an unusable
- * state, because it will be partly offset into a record. We should rewind
- * or do something more intelligent. Particularly interesting is the case
- * where we perform a partial read of a record from a non-blockable file
- * descriptor. We should return the partial read and continue...?
- */
-int
-au_read_rec(FILE *fp, u_char **buf)
-{
- u_char *bptr;
- u_int32_t recsize;
- u_int32_t bytestoread;
- u_char type;
-
- u_int32_t sec, msec;
- u_int16_t filenamelen;
-
- type = fgetc(fp);
-
- switch (type) {
- case AUT_HEADER32:
- case AUT_HEADER32_EX:
- case AUT_HEADER64:
- case AUT_HEADER64_EX:
- /* read the record size from the token */
- if (fread(&recsize, 1, sizeof(u_int32_t), fp) <
- sizeof(u_int32_t)) {
- errno = EINVAL;
- return (-1);
- }
- recsize = be32toh(recsize);
-
- /* Check for recsize sanity */
- if (recsize < (sizeof(u_int32_t) + sizeof(u_char))) {
- errno = EINVAL;
- return (-1);
- }
-
- *buf = malloc(recsize * sizeof(u_char));
- if (*buf == NULL)
- return (-1);
- bptr = *buf;
- memset(bptr, 0, recsize);
-
- /* store the token contents already read, back to the buffer*/
- *bptr = type;
- bptr++;
- be32enc(bptr, recsize);
- bptr += sizeof(u_int32_t);
-
- /* now read remaining record bytes */
- bytestoread = recsize - (sizeof(u_int32_t) + sizeof(u_char));
-
- if (fread(bptr, 1, bytestoread, fp) < bytestoread) {
- free(*buf);
- errno = EINVAL;
- return (-1);
- }
- break;
-
- case AUT_OTHER_FILE32:
- /*
- * The file token is variable-length, as it includes a
- * pathname. As a result, we have to read incrementally
- * until we know the total length, then allocate space and
- * read the rest.
- */
- if (fread(&sec, 1, sizeof(sec), fp) < sizeof(sec)) {
- errno = EINVAL;
- return (-1);
- }
- if (fread(&msec, 1, sizeof(msec), fp) < sizeof(msec)) {
- errno = EINVAL;
- return (-1);
- }
- if (fread(&filenamelen, 1, sizeof(filenamelen), fp) <
- sizeof(filenamelen)) {
- errno = EINVAL;
- return (-1);
- }
- recsize = sizeof(type) + sizeof(sec) + sizeof(msec) +
- sizeof(filenamelen) + ntohs(filenamelen);
- *buf = malloc(recsize);
- if (*buf == NULL)
- return (-1);
- bptr = *buf;
-
- bcopy(&type, bptr, sizeof(type));
- bptr += sizeof(type);
- bcopy(&sec, bptr, sizeof(sec));
- bptr += sizeof(sec);
- bcopy(&msec, bptr, sizeof(msec));
- bptr += sizeof(msec);
- bcopy(&filenamelen, bptr, sizeof(filenamelen));
- bptr += sizeof(filenamelen);
-
- if (fread(bptr, 1, ntohs(filenamelen), fp) <
- ntohs(filenamelen)) {
- free(buf);
- errno = EINVAL;
- return (-1);
- }
- break;
-
- default:
- errno = EINVAL;
- return (-1);
- }
-
- return (recsize);
-}
Copied: vendor/openbsm/1.2_alpha4/libbsm/bsm_io.c (from rev 11163, vendor/openbsm/dist/libbsm/bsm_io.c)
===================================================================
--- vendor/openbsm/1.2_alpha4/libbsm/bsm_io.c (rev 0)
+++ vendor/openbsm/1.2_alpha4/libbsm/bsm_io.c 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,4612 @@
+/*-
+ * Copyright (c) 2004-2009 Apple Inc.
+ * Copyright (c) 2005 SPARTA, Inc.
+ * Copyright (c) 2006 Robert N. M. Watson
+ * Copyright (c) 2006 Martin Voros
+ * All rights reserved.
+ *
+ * This code was developed in part by Robert N. M. Watson, Senior Principal
+ * Scientist, SPARTA, Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of Apple Inc. ("Apple") nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <sys/types.h>
+
+#include <config/config.h>
+
+#ifdef USE_ENDIAN_H
+#include <endian.h>
+#endif
+#ifdef USE_SYS_ENDIAN_H
+#include <sys/endian.h>
+#endif
+#ifdef USE_MACHINE_ENDIAN_H
+#include <machine/endian.h>
+#endif
+#ifdef USE_COMPAT_ENDIAN_H
+#include <compat/endian.h>
+#endif
+#ifdef USE_COMPAT_ENDIAN_ENC_H
+#include <compat/endian_enc.h>
+#endif
+
+#ifdef HAVE_FULL_QUEUE_H
+#include <sys/queue.h>
+#else /* !HAVE_FULL_QUEUE_H */
+#include <compat/queue.h>
+#endif /* !HAVE_FULL_QUEUE_H */
+
+#include <sys/stat.h>
+#include <sys/socket.h>
+
+#include <bsm/libbsm.h>
+
+#include <unistd.h>
+#include <netinet/in.h>
+#include <arpa/inet.h>
+#include <errno.h>
+#include <time.h>
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+#include <pwd.h>
+#include <grp.h>
+
+#ifdef HAVE_VIS
+#include <vis.h>
+#else
+#include <compat/vis.h>
+#endif
+
+#include <bsm/audit_internal.h>
+
+#define READ_TOKEN_BYTES(buf, len, dest, size, bytesread, err) do { \
+ if ((bytesread) + (size) > (u_int32_t)(len)) { \
+ (err) = 1; \
+ } else { \
+ memcpy((dest), (buf) + (bytesread), (size)); \
+ bytesread += size; \
+ } \
+} while (0)
+
+#define READ_TOKEN_U_CHAR(buf, len, dest, bytesread, err) do { \
+ if ((bytesread) + sizeof(u_char) <= (u_int32_t)(len)) { \
+ (dest) = buf[(bytesread)]; \
+ (bytesread) += sizeof(u_char); \
+ } else \
+ (err) = 1; \
+} while (0)
+
+#define READ_TOKEN_U_INT16(buf, len, dest, bytesread, err) do { \
+ if ((bytesread) + sizeof(u_int16_t) <= (u_int32_t)(len)) { \
+ (dest) = be16dec((buf) + (bytesread)); \
+ (bytesread) += sizeof(u_int16_t); \
+ } else \
+ (err) = 1; \
+} while (0)
+
+#define READ_TOKEN_U_INT32(buf, len, dest, bytesread, err) do { \
+ if ((bytesread) + sizeof(u_int32_t) <= (u_int32_t)(len)) { \
+ (dest) = be32dec((buf) + (bytesread)); \
+ (bytesread) += sizeof(u_int32_t); \
+ } else \
+ (err) = 1; \
+} while (0)
+
+#define READ_TOKEN_U_INT64(buf, len, dest, bytesread, err) do { \
+ if ((bytesread) + sizeof(u_int64_t) <= (u_int32_t)(len)) { \
+ dest = be64dec((buf) + (bytesread)); \
+ (bytesread) += sizeof(u_int64_t); \
+ } else \
+ (err) = 1; \
+} while (0)
+
+#define SET_PTR(buf, len, ptr, size, bytesread, err) do { \
+ if ((bytesread) + (size) > (u_int32_t)(len)) \
+ (err) = 1; \
+ else { \
+ (ptr) = (buf) + (bytesread); \
+ (bytesread) += (size); \
+ } \
+} while (0)
+
+/*
+ * XML option.
+ */
+#define AU_PLAIN 0
+#define AU_XML 1
+
+/*
+ * Prints the delimiter string.
+ */
+static void
+print_delim(FILE *fp, const char *del)
+{
+
+ fprintf(fp, "%s", del);
+}
+
+/*
+ * Prints a single byte in the given format.
+ */
+static void
+print_1_byte(FILE *fp, u_char val, const char *format)
+{
+
+ fprintf(fp, format, val);
+}
+
+/*
+ * Print 2 bytes in the given format.
+ */
+static void
+print_2_bytes(FILE *fp, u_int16_t val, const char *format)
+{
+
+ fprintf(fp, format, val);
+}
+
+/*
+ * Prints 4 bytes in the given format.
+ */
+static void
+print_4_bytes(FILE *fp, u_int32_t val, const char *format)
+{
+
+ fprintf(fp, format, val);
+}
+
+/*
+ * Prints 8 bytes in the given format.
+ */
+static void
+print_8_bytes(FILE *fp, u_int64_t val, const char *format)
+{
+
+ fprintf(fp, format, val);
+}
+
+/*
+ * Prints the given size of data bytes in hex.
+ */
+static void
+print_mem(FILE *fp, u_char *data, size_t len)
+{
+ u_int32_t i;
+
+ if (len > 0) {
+ fprintf(fp, "0x");
+ for (i = 0; i < len; i++)
+ fprintf(fp, "%02x", data[i]);
+ }
+}
+
+/*
+ * Prints the given data bytes as a string.
+ */
+static void
+print_string(FILE *fp, const char *str, size_t len)
+{
+ u_int32_t i;
+
+ if (len > 0) {
+ for (i = 0; i < len; i++) {
+ if (str[i] != '\0')
+ fprintf(fp, "%c", str[i]);
+ }
+ }
+}
+
+/*
+ * Prints the given data bytes as an XML-sanitized string.
+ */
+static void
+print_xml_string(FILE *fp, const char *str, size_t len)
+{
+ u_int32_t i;
+ char visbuf[5];
+
+ if (len == 0)
+ return;
+
+ for (i = 0; i < len; i++) {
+ switch (str[i]) {
+ case '\0':
+ return;
+
+ case '&':
+ (void) fprintf(fp, "&");
+ break;
+
+ case '<':
+ (void) fprintf(fp, "<");
+ break;
+
+ case '>':
+ (void) fprintf(fp, ">");
+ break;
+
+ case '\"':
+ (void) fprintf(fp, """);
+ break;
+
+ case '\'':
+ (void) fprintf(fp, "'");
+ break;
+
+ default:
+ (void) vis(visbuf, str[i], VIS_CSTYLE, 0);
+ (void) fprintf(fp, "%s", visbuf);
+ break;
+ }
+ }
+}
+
+/*
+ * Prints the beginning of an attribute.
+ */
+static void
+open_attr(FILE *fp, const char *str)
+{
+
+ fprintf(fp,"%s=\"", str);
+}
+
+/*
+ * Prints the end of an attribute.
+ */
+static void
+close_attr(FILE *fp)
+{
+
+ fprintf(fp,"\" ");
+}
+
+/*
+ * Prints the end of a tag.
+ */
+static void
+close_tag(FILE *fp, u_char type)
+{
+
+ switch(type) {
+ case AUT_HEADER32:
+ fprintf(fp, ">");
+ break;
+
+ case AUT_HEADER32_EX:
+ fprintf(fp, ">");
+ break;
+
+ case AUT_HEADER64:
+ fprintf(fp, ">");
+ break;
+
+ case AUT_HEADER64_EX:
+ fprintf(fp, ">");
+ break;
+
+ case AUT_ARG32:
+ fprintf(fp, "/>");
+ break;
+
+ case AUT_ARG64:
+ fprintf(fp, "/>");
+ break;
+
+ case AUT_ATTR32:
+ fprintf(fp, "/>");
+ break;
+
+ case AUT_ATTR64:
+ fprintf(fp, "/>");
+ break;
+
+ case AUT_EXIT:
+ fprintf(fp, "/>");
+ break;
+
+ case AUT_EXEC_ARGS:
+ fprintf(fp, "</exec_args>");
+ break;
+
+ case AUT_EXEC_ENV:
+ fprintf(fp, "</exec_env>");
+ break;
+
+ case AUT_OTHER_FILE32:
+ fprintf(fp, "</file>");
+ break;
+
+ case AUT_NEWGROUPS:
+ fprintf(fp, "</group>");
+ break;
+
+ case AUT_IN_ADDR:
+ fprintf(fp, "</ip_address>");
+ break;
+
+ case AUT_IN_ADDR_EX:
+ fprintf(fp, "</ip_address>");
+ break;
+
+ case AUT_IP:
+ fprintf(fp, "/>");
+ break;
+
+ case AUT_IPC:
+ fprintf(fp, "/>");
+ break;
+
+ case AUT_IPC_PERM:
+ fprintf(fp, "/>");
+ break;
+
+ case AUT_IPORT:
+ fprintf(fp, "</ip_port>");
+ break;
+
+ case AUT_OPAQUE:
+ fprintf(fp, "</opaque>");
+ break;
+
+ case AUT_PATH:
+ fprintf(fp, "</path>");
+ break;
+
+ case AUT_PROCESS32:
+ fprintf(fp, "/>");
+ break;
+
+ case AUT_PROCESS32_EX:
+ fprintf(fp, "/>");
+ break;
+
+ case AUT_PROCESS64:
+ fprintf(fp, "/>");
+ break;
+
+ case AUT_PROCESS64_EX:
+ fprintf(fp, "/>");
+ break;
+
+ case AUT_RETURN32:
+ fprintf(fp, "/>");
+ break;
+
+ case AUT_RETURN64:
+ fprintf(fp, "/>");
+ break;
+
+ case AUT_SEQ:
+ fprintf(fp, "/>");
+ break;
+
+ case AUT_SOCKET:
+ fprintf(fp, "/>");
+ break;
+
+ case AUT_SOCKINET32:
+ fprintf(fp, "/>");
+ break;
+
+ case AUT_SOCKUNIX:
+ fprintf(fp, "/>");
+ break;
+
+ case AUT_SOCKINET128:
+ fprintf(fp, "/>");
+ break;
+
+ case AUT_SUBJECT32:
+ fprintf(fp, "/>");
+ break;
+
+ case AUT_SUBJECT64:
+ fprintf(fp, "/>");
+ break;
+
+ case AUT_SUBJECT32_EX:
+ fprintf(fp, "/>");
+ break;
+
+ case AUT_SUBJECT64_EX:
+ fprintf(fp, "/>");
+ break;
+
+ case AUT_TEXT:
+ fprintf(fp, "</text>");
+ break;
+
+ case AUT_SOCKET_EX:
+ fprintf(fp, "/>");
+ break;
+
+ case AUT_DATA:
+ fprintf(fp, "</arbitrary>");
+ break;
+
+ case AUT_ZONENAME:
+ fprintf(fp, "/>");
+ break;
+ }
+}
+
+/*
+ * Prints the token type in either the raw or the default form.
+ */
+static void
+print_tok_type(FILE *fp, u_char type, const char *tokname, int oflags)
+{
+
+ if (oflags & AU_OFLAG_XML) {
+ switch(type) {
+ case AUT_HEADER32:
+ fprintf(fp, "<record ");
+ break;
+
+ case AUT_HEADER32_EX:
+ fprintf(fp, "<record ");
+ break;
+
+ case AUT_HEADER64:
+ fprintf(fp, "<record ");
+ break;
+
+ case AUT_HEADER64_EX:
+ fprintf(fp, "<record ");
+ break;
+
+ case AUT_TRAILER:
+ fprintf(fp, "</record>");
+ break;
+
+ case AUT_ARG32:
+ fprintf(fp, "<argument ");
+ break;
+
+ case AUT_ARG64:
+ fprintf(fp, "<argument ");
+ break;
+
+ case AUT_ATTR32:
+ fprintf(fp, "<attribute ");
+ break;
+
+ case AUT_ATTR64:
+ fprintf(fp, "<attribute ");
+ break;
+
+ case AUT_EXIT:
+ fprintf(fp, "<exit ");
+ break;
+
+ case AUT_EXEC_ARGS:
+ fprintf(fp, "<exec_args>");
+ break;
+
+ case AUT_EXEC_ENV:
+ fprintf(fp, "<exec_env>");
+ break;
+
+ case AUT_OTHER_FILE32:
+ fprintf(fp, "<file ");
+ break;
+
+ case AUT_NEWGROUPS:
+ fprintf(fp, "<group>");
+ break;
+
+ case AUT_IN_ADDR:
+ fprintf(fp, "<ip_address>");
+ break;
+
+ case AUT_IN_ADDR_EX:
+ fprintf(fp, "<ip_address>");
+ break;
+
+ case AUT_IP:
+ fprintf(fp, "<ip ");
+ break;
+
+ case AUT_IPC:
+ fprintf(fp, "<IPC");
+ break;
+
+ case AUT_IPC_PERM:
+ fprintf(fp, "<IPC_perm ");
+ break;
+
+ case AUT_IPORT:
+ fprintf(fp, "<ip_port>");
+ break;
+
+ case AUT_OPAQUE:
+ fprintf(fp, "<opaque>");
+ break;
+
+ case AUT_PATH:
+ fprintf(fp, "<path>");
+ break;
+
+ case AUT_PROCESS32:
+ fprintf(fp, "<process ");
+ break;
+
+ case AUT_PROCESS32_EX:
+ fprintf(fp, "<process ");
+ break;
+
+ case AUT_PROCESS64:
+ fprintf(fp, "<process ");
+ break;
+
+ case AUT_PROCESS64_EX:
+ fprintf(fp, "<process ");
+ break;
+
+ case AUT_RETURN32:
+ fprintf(fp, "<return ");
+ break;
+
+ case AUT_RETURN64:
+ fprintf(fp, "<return ");
+ break;
+
+ case AUT_SEQ:
+ fprintf(fp, "<sequence ");
+ break;
+
+ case AUT_SOCKET:
+ fprintf(fp, "<socket ");
+ break;
+
+ case AUT_SOCKINET32:
+ fprintf(fp, "<socket-inet ");
+ break;
+
+ case AUT_SOCKUNIX:
+ fprintf(fp, "<socket-unix ");
+ break;
+
+ case AUT_SOCKINET128:
+ fprintf(fp, "<socket-inet6 ");
+ break;
+
+ case AUT_SUBJECT32:
+ fprintf(fp, "<subject ");
+ break;
+
+ case AUT_SUBJECT64:
+ fprintf(fp, "<subject ");
+ break;
+
+ case AUT_SUBJECT32_EX:
+ fprintf(fp, "<subject ");
+ break;
+
+ case AUT_SUBJECT64_EX:
+ fprintf(fp, "<subject ");
+ break;
+
+ case AUT_TEXT:
+ fprintf(fp, "<text>");
+ break;
+
+ case AUT_SOCKET_EX:
+ fprintf(fp, "<socket ");
+ break;
+
+ case AUT_DATA:
+ fprintf(fp, "<arbitrary ");
+ break;
+
+ case AUT_ZONENAME:
+ fprintf(fp, "<zone ");
+ break;
+ }
+ } else {
+ if (oflags & AU_OFLAG_RAW)
+ fprintf(fp, "%u", type);
+ else
+ fprintf(fp, "%s", tokname);
+ }
+}
+
+/*
+ * Prints a user value.
+ */
+static void
+print_user(FILE *fp, u_int32_t usr, int oflags)
+{
+ struct passwd *pwent;
+
+ if (oflags & AU_OFLAG_RAW)
+ fprintf(fp, "%d", usr);
+ else {
+ pwent = getpwuid(usr);
+ if (pwent != NULL)
+ fprintf(fp, "%s", pwent->pw_name);
+ else
+ fprintf(fp, "%d", usr);
+ }
+}
+
+/*
+ * Prints a group value.
+ */
+static void
+print_group(FILE *fp, u_int32_t grp, int oflags)
+{
+ struct group *grpent;
+
+ if (oflags & AU_OFLAG_RAW)
+ fprintf(fp, "%d", grp);
+ else {
+ grpent = getgrgid(grp);
+ if (grpent != NULL)
+ fprintf(fp, "%s", grpent->gr_name);
+ else
+ fprintf(fp, "%d", grp);
+ }
+}
+
+/*
+ * Prints the event from the header token in either the short, default or raw
+ * form.
+ */
+static void
+print_event(FILE *fp, u_int16_t ev, int oflags)
+{
+ char event_ent_name[AU_EVENT_NAME_MAX];
+ char event_ent_desc[AU_EVENT_DESC_MAX];
+ struct au_event_ent e, *ep;
+
+ bzero(&e, sizeof(e));
+ bzero(event_ent_name, sizeof(event_ent_name));
+ bzero(event_ent_desc, sizeof(event_ent_desc));
+ e.ae_name = event_ent_name;
+ e.ae_desc = event_ent_desc;
+
+ ep = getauevnum_r(&e, ev);
+ if (ep == NULL) {
+ fprintf(fp, "%u", ev);
+ return;
+ }
+
+ if (oflags & AU_OFLAG_RAW)
+ fprintf(fp, "%u", ev);
+ else if (oflags & AU_OFLAG_SHORT)
+ fprintf(fp, "%s", e.ae_name);
+ else
+ fprintf(fp, "%s", e.ae_desc);
+}
+
+
+/*
+ * Prints the event modifier from the header token in either the default or
+ * raw form.
+ */
+static void
+print_evmod(FILE *fp, u_int16_t evmod, int oflags)
+{
+ if (oflags & AU_OFLAG_RAW)
+ fprintf(fp, "%u", evmod);
+ else
+ fprintf(fp, "%u", evmod);
+}
+
+/*
+ * Prints seconds in the ctime format.
+ */
+static void
+print_sec32(FILE *fp, u_int32_t sec, int oflags)
+{
+ time_t timestamp;
+ char timestr[26];
+
+ if (oflags & AU_OFLAG_RAW)
+ fprintf(fp, "%u", sec);
+ else {
+ timestamp = (time_t)sec;
+ ctime_r(×tamp, timestr);
+ timestr[24] = '\0'; /* No new line */
+ fprintf(fp, "%s", timestr);
+ }
+}
+
+/*
+ * XXXRW: 64-bit token streams make use of 64-bit time stamps; since we
+ * assume a 32-bit time_t, we simply truncate for now.
+ */
+static void
+print_sec64(FILE *fp, u_int64_t sec, int oflags)
+{
+ time_t timestamp;
+ char timestr[26];
+
+ if (oflags & AU_OFLAG_RAW)
+ fprintf(fp, "%u", (u_int32_t)sec);
+ else {
+ timestamp = (time_t)sec;
+ ctime_r(×tamp, timestr);
+ timestr[24] = '\0'; /* No new line */
+ fprintf(fp, "%s", timestr);
+ }
+}
+
+/*
+ * Prints the excess milliseconds.
+ */
+static void
+print_msec32(FILE *fp, u_int32_t msec, int oflags)
+{
+ if (oflags & AU_OFLAG_RAW)
+ fprintf(fp, "%u", msec);
+ else
+ fprintf(fp, " + %u msec", msec);
+}
+
+/*
+ * XXXRW: 64-bit token streams make use of 64-bit time stamps; since we assume
+ * a 32-bit msec, we simply truncate for now.
+ */
+static void
+print_msec64(FILE *fp, u_int64_t msec, int oflags)
+{
+
+ msec &= 0xffffffff;
+ if (oflags & AU_OFLAG_RAW)
+ fprintf(fp, "%u", (u_int32_t)msec);
+ else
+ fprintf(fp, " + %u msec", (u_int32_t)msec);
+}
+
+/*
+ * Prints a dotted form for the IP address.
+ */
+static void
+print_ip_address(FILE *fp, u_int32_t ip)
+{
+ struct in_addr ipaddr;
+
+ ipaddr.s_addr = ip;
+ fprintf(fp, "%s", inet_ntoa(ipaddr));
+}
+
+/*
+ * Prints a string value for the given ip address.
+ */
+static void
+print_ip_ex_address(FILE *fp, u_int32_t type, u_int32_t *ipaddr)
+{
+ struct in_addr ipv4;
+ struct in6_addr ipv6;
+ char dst[INET6_ADDRSTRLEN];
+
+ switch (type) {
+ case AU_IPv4:
+ ipv4.s_addr = (in_addr_t)(ipaddr[0]);
+ fprintf(fp, "%s", inet_ntop(AF_INET, &ipv4, dst,
+ INET6_ADDRSTRLEN));
+ break;
+
+ case AU_IPv6:
+ bcopy(ipaddr, &ipv6, sizeof(ipv6));
+ fprintf(fp, "%s", inet_ntop(AF_INET6, &ipv6, dst,
+ INET6_ADDRSTRLEN));
+ break;
+
+ default:
+ fprintf(fp, "invalid");
+ }
+}
+
+/*
+ * Prints return value as success or failure.
+ */
+static void
+print_retval(FILE *fp, u_char status, int oflags)
+{
+ int error;
+
+ if (oflags & AU_OFLAG_RAW)
+ fprintf(fp, "%u", status);
+ else {
+ /*
+ * Convert to a local error number and print the OS's version
+ * of the error string if possible. We may want to provide
+ * an au_strerror(3) in the future so that we can print
+ * strings for non-local errors.
+ */
+ if (au_bsm_to_errno(status, &error) == 0) {
+ if (error == 0)
+ fprintf(fp, "success");
+ else
+ fprintf(fp, "failure : %s", strerror(error));
+ } else
+ fprintf(fp, "failure: Unknown error: %d", status);
+ }
+}
+
+/*
+ * Prints the exit value.
+ */
+static void
+print_errval(FILE *fp, u_int32_t val)
+{
+
+ fprintf(fp, "Error %u", val);
+}
+
+/*
+ * Prints IPC type.
+ */
+static void
+print_ipctype(FILE *fp, u_char type, int oflags)
+{
+ if (oflags & AU_OFLAG_RAW)
+ fprintf(fp, "%u", type);
+ else {
+ if (type == AT_IPC_MSG)
+ fprintf(fp, "Message IPC");
+ else if (type == AT_IPC_SEM)
+ fprintf(fp, "Semaphore IPC");
+ else if (type == AT_IPC_SHM)
+ fprintf(fp, "Shared Memory IPC");
+ else
+ fprintf(fp, "%u", type);
+ }
+}
+
+/*
+ * Print XML header.
+ */
+void
+au_print_xml_header(FILE *outfp)
+{
+
+ fprintf(outfp, "<?xml version='1.0' ?>\n");
+ fprintf(outfp, "<audit>\n");
+}
+
+/*
+ * Print XML footer.
+ */
+void
+au_print_xml_footer(FILE *outfp)
+{
+
+ fprintf(outfp, "</audit>\n");
+}
+
+/*
+ * record byte count 4 bytes
+ * version # 1 byte [2]
+ * event type 2 bytes
+ * event modifier 2 bytes
+ * seconds of time 4 bytes/8 bytes (32-bit/64-bit value)
+ * milliseconds of time 4 bytes/8 bytes (32-bit/64-bit value)
+ */
+static int
+fetch_header32_tok(tokenstr_t *tok, u_char *buf, int len)
+{
+ int err = 0;
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.hdr32.size, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_CHAR(buf, len, tok->tt.hdr32.version, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT16(buf, len, tok->tt.hdr32.e_type, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT16(buf, len, tok->tt.hdr32.e_mod, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.hdr32.s, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.hdr32.ms, tok->len, err);
+ if (err)
+ return (-1);
+
+ return (0);
+}
+
+static void
+print_header32_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags)
+{
+
+ print_tok_type(fp, tok->id, "header", oflags);
+ if (oflags & AU_OFLAG_XML) {
+ open_attr(fp, "version");
+ print_1_byte(fp, tok->tt.hdr32.version, "%u");
+ close_attr(fp);
+ open_attr(fp, "event");
+ print_event(fp, tok->tt.hdr32.e_type, oflags);
+ close_attr(fp);
+ open_attr(fp, "modifier");
+ print_evmod(fp, tok->tt.hdr32.e_mod, oflags);
+ close_attr(fp);
+ open_attr(fp, "time");
+ print_sec32(fp, tok->tt.hdr32.s, oflags);
+ close_attr(fp);
+ open_attr(fp, "msec");
+ print_msec32(fp, tok->tt.hdr32.ms, oflags);
+ close_attr(fp);
+ close_tag(fp, tok->id);
+ } else {
+ print_delim(fp, del);
+ print_4_bytes(fp, tok->tt.hdr32.size, "%u");
+ print_delim(fp, del);
+ print_1_byte(fp, tok->tt.hdr32.version, "%u");
+ print_delim(fp, del);
+ print_event(fp, tok->tt.hdr32.e_type, oflags);
+ print_delim(fp, del);
+ print_evmod(fp, tok->tt.hdr32.e_mod, oflags);
+ print_delim(fp, del);
+ print_sec32(fp, tok->tt.hdr32.s, oflags);
+ print_delim(fp, del);
+ print_msec32(fp, tok->tt.hdr32.ms, oflags);
+ }
+}
+
+/*
+ * The Solaris specifications for AUE_HEADER32_EX seem to differ a bit
+ * depending on the bit of the specifications found. The OpenSolaris source
+ * code uses a 4-byte address length, followed by some number of bytes of
+ * address data. This contrasts with the Solaris audit.log.5 man page, which
+ * specifies a 1-byte length field. We use the Solaris 10 definition so that
+ * we can parse audit trails from that system.
+ *
+ * record byte count 4 bytes
+ * version # 1 byte [2]
+ * event type 2 bytes
+ * event modifier 2 bytes
+ * address type/length 4 bytes
+ * [ Solaris man page: address type/length 1 byte]
+ * machine address 4 bytes/16 bytes (IPv4/IPv6 address)
+ * seconds of time 4 bytes/8 bytes (32/64-bits)
+ * nanoseconds of time 4 bytes/8 bytes (32/64-bits)
+ */
+static int
+fetch_header32_ex_tok(tokenstr_t *tok, u_char *buf, int len)
+{
+ int err = 0;
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.hdr32_ex.size, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_CHAR(buf, len, tok->tt.hdr32_ex.version, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT16(buf, len, tok->tt.hdr32_ex.e_type, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT16(buf, len, tok->tt.hdr32_ex.e_mod, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.hdr32_ex.ad_type, tok->len, err);
+ if (err)
+ return (-1);
+
+ bzero(tok->tt.hdr32_ex.addr, sizeof(tok->tt.hdr32_ex.addr));
+ switch (tok->tt.hdr32_ex.ad_type) {
+ case AU_IPv4:
+ READ_TOKEN_BYTES(buf, len, &tok->tt.hdr32_ex.addr[0],
+ sizeof(tok->tt.hdr32_ex.addr[0]), tok->len, err);
+ if (err)
+ return (-1);
+ break;
+
+ case AU_IPv6:
+ READ_TOKEN_BYTES(buf, len, tok->tt.hdr32_ex.addr,
+ sizeof(tok->tt.hdr32_ex.addr), tok->len, err);
+ break;
+ }
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.hdr32_ex.s, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.hdr32_ex.ms, tok->len, err);
+ if (err)
+ return (-1);
+
+ return (0);
+}
+
+static void
+print_header32_ex_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags)
+{
+
+ print_tok_type(fp, tok->id, "header_ex", oflags);
+ if (oflags & AU_OFLAG_RAW) {
+ open_attr(fp, "version");
+ print_1_byte(fp, tok->tt.hdr32_ex.version, "%u");
+ close_attr(fp);
+ open_attr(fp, "event");
+ print_event(fp, tok->tt.hdr32_ex.e_type, oflags);
+ close_attr(fp);
+ open_attr(fp, "modifier");
+ print_evmod(fp, tok->tt.hdr32_ex.e_mod, oflags);
+ close_attr(fp);
+ open_attr(fp, "host");
+ print_ip_ex_address(fp, tok->tt.hdr32_ex.ad_type,
+ tok->tt.hdr32_ex.addr);
+ close_attr(fp);
+ open_attr(fp, "time");
+ print_sec32(fp, tok->tt.hdr32_ex.s, oflags);
+ close_attr(fp);
+ open_attr(fp, "msec");
+ print_msec32(fp, tok->tt.hdr32_ex.ms, oflags);
+ close_attr(fp);
+ close_tag(fp, tok->id);
+ } else {
+ print_delim(fp, del);
+ print_4_bytes(fp, tok->tt.hdr32_ex.size, "%u");
+ print_delim(fp, del);
+ print_1_byte(fp, tok->tt.hdr32_ex.version, "%u");
+ print_delim(fp, del);
+ print_event(fp, tok->tt.hdr32_ex.e_type, oflags);
+ print_delim(fp, del);
+ print_evmod(fp, tok->tt.hdr32_ex.e_mod, oflags);
+ print_delim(fp, del);
+ print_ip_ex_address(fp, tok->tt.hdr32_ex.ad_type,
+ tok->tt.hdr32_ex.addr);
+ print_delim(fp, del);
+ print_sec32(fp, tok->tt.hdr32_ex.s, oflags);
+ print_delim(fp, del);
+ print_msec32(fp, tok->tt.hdr32_ex.ms, oflags);
+ }
+}
+
+/*
+ * record byte count 4 bytes
+ * event type 2 bytes
+ * event modifier 2 bytes
+ * seconds of time 4 bytes/8 bytes (32-bit/64-bit value)
+ * milliseconds of time 4 bytes/8 bytes (32-bit/64-bit value)
+ * version #
+ */
+static int
+fetch_header64_tok(tokenstr_t *tok, u_char *buf, int len)
+{
+ int err = 0;
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.hdr64.size, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_CHAR(buf, len, tok->tt.hdr64.version, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT16(buf, len, tok->tt.hdr64.e_type, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT16(buf, len, tok->tt.hdr64.e_mod, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT64(buf, len, tok->tt.hdr64.s, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT64(buf, len, tok->tt.hdr64.ms, tok->len, err);
+ if (err)
+ return (-1);
+
+ return (0);
+}
+
+static void
+print_header64_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags)
+{
+
+ print_tok_type(fp, tok->id, "header", oflags);
+ if (oflags & AU_OFLAG_XML) {
+ open_attr(fp, "version");
+ print_1_byte(fp, tok->tt.hdr64.version, "%u");
+ close_attr(fp);
+ open_attr(fp, "event");
+ print_event(fp, tok->tt.hdr64.e_type, oflags);
+ close_attr(fp);
+ open_attr(fp, "modifier");
+ print_evmod(fp, tok->tt.hdr64.e_mod, oflags);
+ close_attr(fp);
+ open_attr(fp, "time");
+ print_sec64(fp, tok->tt.hdr64.s, oflags);
+ close_attr(fp);
+ open_attr(fp, "msec");
+ print_msec64(fp, tok->tt.hdr64.ms, oflags);
+ close_attr(fp);
+ close_tag(fp, tok->id);
+ } else {
+ print_delim(fp, del);
+ print_4_bytes(fp, tok->tt.hdr64.size, "%u");
+ print_delim(fp, del);
+ print_1_byte(fp, tok->tt.hdr64.version, "%u");
+ print_delim(fp, del);
+ print_event(fp, tok->tt.hdr64.e_type, oflags);
+ print_delim(fp, del);
+ print_evmod(fp, tok->tt.hdr64.e_mod, oflags);
+ print_delim(fp, del);
+ print_sec64(fp, tok->tt.hdr64.s, oflags);
+ print_delim(fp, del);
+ print_msec64(fp, tok->tt.hdr64.ms, oflags);
+ }
+}
+
+/*
+ * record byte count 4 bytes
+ * version # 1 byte [2]
+ * event type 2 bytes
+ * event modifier 2 bytes
+ * address type/length 4 bytes
+ * [ Solaris man page: address type/length 1 byte]
+ * machine address 4 bytes/16 bytes (IPv4/IPv6 address)
+ * seconds of time 4 bytes/8 bytes (32/64-bits)
+ * nanoseconds of time 4 bytes/8 bytes (32/64-bits)
+ *
+ * XXXAUDIT: See comment by fetch_header32_ex_tok() for details on the
+ * accuracy of the BSM spec.
+ */
+static int
+fetch_header64_ex_tok(tokenstr_t *tok, u_char *buf, int len)
+{
+ int err = 0;
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.hdr64_ex.size, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_CHAR(buf, len, tok->tt.hdr64_ex.version, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT16(buf, len, tok->tt.hdr64_ex.e_type, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT16(buf, len, tok->tt.hdr64_ex.e_mod, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.hdr64_ex.ad_type, tok->len, err);
+ if (err)
+ return (-1);
+
+ bzero(tok->tt.hdr64_ex.addr, sizeof(tok->tt.hdr64_ex.addr));
+ switch (tok->tt.hdr64_ex.ad_type) {
+ case AU_IPv4:
+ READ_TOKEN_BYTES(buf, len, &tok->tt.hdr64_ex.addr[0],
+ sizeof(tok->tt.hdr64_ex.addr[0]), tok->len, err);
+ if (err)
+ return (-1);
+ break;
+
+ case AU_IPv6:
+ READ_TOKEN_BYTES(buf, len, tok->tt.hdr64_ex.addr,
+ sizeof(tok->tt.hdr64_ex.addr), tok->len, err);
+ break;
+ }
+
+ READ_TOKEN_U_INT64(buf, len, tok->tt.hdr64_ex.s, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT64(buf, len, tok->tt.hdr64_ex.ms, tok->len, err);
+ if (err)
+ return (-1);
+
+ return (0);
+}
+
+static void
+print_header64_ex_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags)
+{
+
+ print_tok_type(fp, tok->id, "header_ex", oflags);
+ if (oflags & AU_OFLAG_XML) {
+ open_attr(fp, "version");
+ print_1_byte(fp, tok->tt.hdr64_ex.version, "%u");
+ close_attr(fp);
+ open_attr(fp, "event");
+ print_event(fp, tok->tt.hdr64_ex.e_type, oflags);
+ close_attr(fp);
+ open_attr(fp, "modifier");
+ print_evmod(fp, tok->tt.hdr64_ex.e_mod, oflags);
+ close_attr(fp);
+ open_attr(fp, "host");
+ print_ip_ex_address(fp, tok->tt.hdr64_ex.ad_type,
+ tok->tt.hdr64_ex.addr);
+ close_attr(fp);
+ open_attr(fp, "time");
+ print_sec64(fp, tok->tt.hdr64_ex.s, oflags);
+ close_attr(fp);
+ open_attr(fp, "msec");
+ print_msec64(fp, tok->tt.hdr64_ex.ms, oflags);
+ close_attr(fp);
+ close_tag(fp, tok->id);
+ } else {
+ print_delim(fp, del);
+ print_4_bytes(fp, tok->tt.hdr64_ex.size, "%u");
+ print_delim(fp, del);
+ print_1_byte(fp, tok->tt.hdr64_ex.version, "%u");
+ print_delim(fp, del);
+ print_event(fp, tok->tt.hdr64_ex.e_type, oflags);
+ print_delim(fp, del);
+ print_evmod(fp, tok->tt.hdr64_ex.e_mod, oflags);
+ print_delim(fp, del);
+ print_ip_ex_address(fp, tok->tt.hdr64_ex.ad_type,
+ tok->tt.hdr64_ex.addr);
+ print_delim(fp, del);
+ print_sec64(fp, tok->tt.hdr64_ex.s, oflags);
+ print_delim(fp, del);
+ print_msec64(fp, tok->tt.hdr64_ex.ms, oflags);
+ }
+}
+
+/*
+ * trailer magic 2 bytes
+ * record size 4 bytes
+ */
+static int
+fetch_trailer_tok(tokenstr_t *tok, u_char *buf, int len)
+{
+ int err = 0;
+
+ READ_TOKEN_U_INT16(buf, len, tok->tt.trail.magic, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.trail.count, tok->len, err);
+ if (err)
+ return (-1);
+
+ return (0);
+}
+
+static void
+print_trailer_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags)
+{
+
+ print_tok_type(fp, tok->id, "trailer", oflags);
+ if (!(oflags & AU_OFLAG_XML)) {
+ print_delim(fp, del);
+ print_4_bytes(fp, tok->tt.trail.count, "%u");
+ }
+}
+
+/*
+ * argument # 1 byte
+ * argument value 4 bytes/8 bytes (32-bit/64-bit value)
+ * text length 2 bytes
+ * text N bytes + 1 terminating NULL byte
+ */
+static int
+fetch_arg32_tok(tokenstr_t *tok, u_char *buf, int len)
+{
+ int err = 0;
+
+ READ_TOKEN_U_CHAR(buf, len, tok->tt.arg32.no, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.arg32.val, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT16(buf, len, tok->tt.arg32.len, tok->len, err);
+ if (err)
+ return (-1);
+
+ SET_PTR((char*)buf, len, tok->tt.arg32.text, tok->tt.arg32.len,
+ tok->len, err);
+ if (err)
+ return (-1);
+
+ return (0);
+}
+
+static void
+print_arg32_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags)
+{
+
+ print_tok_type(fp, tok->id, "argument", oflags);
+ if (oflags & AU_OFLAG_XML) {
+ open_attr(fp, "arg-num");
+ print_1_byte(fp, tok->tt.arg32.no, "%u");
+ close_attr(fp);
+ open_attr(fp, "value");
+ print_4_bytes(fp, tok->tt.arg32.val, "0x%x");
+ close_attr(fp);
+ open_attr(fp, "desc");
+ print_string(fp, tok->tt.arg32.text, tok->tt.arg32.len);
+ close_attr(fp);
+ close_tag(fp, tok->id);
+ } else {
+ print_delim(fp, del);
+ print_1_byte(fp, tok->tt.arg32.no, "%u");
+ print_delim(fp, del);
+ print_4_bytes(fp, tok->tt.arg32.val, "0x%x");
+ print_delim(fp, del);
+ print_string(fp, tok->tt.arg32.text, tok->tt.arg32.len);
+ }
+}
+
+static int
+fetch_arg64_tok(tokenstr_t *tok, u_char *buf, int len)
+{
+ int err = 0;
+
+ READ_TOKEN_U_CHAR(buf, len, tok->tt.arg64.no, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT64(buf, len, tok->tt.arg64.val, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT16(buf, len, tok->tt.arg64.len, tok->len, err);
+ if (err)
+ return (-1);
+
+ SET_PTR((char*)buf, len, tok->tt.arg64.text, tok->tt.arg64.len,
+ tok->len, err);
+ if (err)
+ return (-1);
+
+ return (0);
+}
+
+static void
+print_arg64_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags)
+{
+
+ print_tok_type(fp, tok->id, "argument", oflags);
+ if (oflags & AU_OFLAG_XML) {
+ open_attr(fp, "arg-num");
+ print_1_byte(fp, tok->tt.arg64.no, "%u");
+ close_attr(fp);
+ open_attr(fp, "value");
+ print_8_bytes(fp, tok->tt.arg64.val, "0x%llx");
+ close_attr(fp);
+ open_attr(fp, "desc");
+ print_string(fp, tok->tt.arg64.text, tok->tt.arg64.len);
+ close_attr(fp);
+ close_tag(fp, tok->id);
+ } else {
+ print_delim(fp, del);
+ print_1_byte(fp, tok->tt.arg64.no, "%u");
+ print_delim(fp, del);
+ print_8_bytes(fp, tok->tt.arg64.val, "0x%llx");
+ print_delim(fp, del);
+ print_string(fp, tok->tt.arg64.text, tok->tt.arg64.len);
+ }
+}
+
+/*
+ * how to print 1 byte
+ * basic unit 1 byte
+ * unit count 1 byte
+ * data items (depends on basic unit)
+ */
+static int
+fetch_arb_tok(tokenstr_t *tok, u_char *buf, int len)
+{
+ int err = 0;
+ int datasize;
+
+ READ_TOKEN_U_CHAR(buf, len, tok->tt.arb.howtopr, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_CHAR(buf, len, tok->tt.arb.bu, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_CHAR(buf, len, tok->tt.arb.uc, tok->len, err);
+ if (err)
+ return (-1);
+
+ /*
+ * Determine the size of the basic unit.
+ */
+ switch(tok->tt.arb.bu) {
+ case AUR_BYTE:
+ /* case AUR_CHAR: */
+ datasize = AUR_BYTE_SIZE;
+ break;
+
+ case AUR_SHORT:
+ datasize = AUR_SHORT_SIZE;
+ break;
+
+ case AUR_INT32:
+ /* case AUR_INT: */
+ datasize = AUR_INT32_SIZE;
+ break;
+
+ case AUR_INT64:
+ datasize = AUR_INT64_SIZE;
+ break;
+
+ default:
+ return (-1);
+ }
+
+ SET_PTR(buf, len, tok->tt.arb.data, datasize * tok->tt.arb.uc,
+ tok->len, err);
+ if (err)
+ return (-1);
+
+ return (0);
+}
+
+static void
+print_arb_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags)
+{
+ char *str;
+ char *format;
+ size_t size;
+ int i;
+
+ print_tok_type(fp, tok->id, "arbitrary", oflags);
+ if (!(oflags & AU_OFLAG_XML))
+ print_delim(fp, del);
+
+ switch(tok->tt.arb.howtopr) {
+ case AUP_BINARY:
+ str = "binary";
+ format = " %c";
+ break;
+
+ case AUP_OCTAL:
+ str = "octal";
+ format = " %o";
+ break;
+
+ case AUP_DECIMAL:
+ str = "decimal";
+ format = " %d";
+ break;
+
+ case AUP_HEX:
+ str = "hex";
+ format = " %x";
+ break;
+
+ case AUP_STRING:
+ str = "string";
+ format = "%c";
+ break;
+
+ default:
+ return;
+ }
+
+ if (oflags & AU_OFLAG_XML) {
+ open_attr(fp, "print");
+ fprintf(fp, "%s",str);
+ close_attr(fp);
+ } else {
+ print_string(fp, str, strlen(str));
+ print_delim(fp, del);
+ }
+ switch(tok->tt.arb.bu) {
+ case AUR_BYTE:
+ /* case AUR_CHAR: */
+ str = "byte";
+ size = AUR_BYTE_SIZE;
+ if (oflags & AU_OFLAG_XML) {
+ open_attr(fp, "type");
+ fprintf(fp, "%zu", size);
+ close_attr(fp);
+ open_attr(fp, "count");
+ print_1_byte(fp, tok->tt.arb.uc, "%u");
+ close_attr(fp);
+ fprintf(fp, ">");
+ for (i = 0; i<tok->tt.arb.uc; i++)
+ fprintf(fp, format, *(tok->tt.arb.data +
+ (size * i)));
+ close_tag(fp, tok->id);
+ } else {
+ print_string(fp, str, strlen(str));
+ print_delim(fp, del);
+ print_1_byte(fp, tok->tt.arb.uc, "%u");
+ print_delim(fp, del);
+ for (i = 0; i<tok->tt.arb.uc; i++)
+ fprintf(fp, format, *(tok->tt.arb.data +
+ (size * i)));
+ }
+ break;
+
+ case AUR_SHORT:
+ str = "short";
+ size = AUR_SHORT_SIZE;
+ if (oflags & AU_OFLAG_XML) {
+ open_attr(fp, "type");
+ fprintf(fp, "%zu", size);
+ close_attr(fp);
+ open_attr(fp, "count");
+ print_1_byte(fp, tok->tt.arb.uc, "%u");
+ close_attr(fp);
+ fprintf(fp, ">");
+ for (i = 0; i < tok->tt.arb.uc; i++)
+ fprintf(fp, format,
+ *((u_int16_t *)(tok->tt.arb.data +
+ (size * i))));
+ close_tag(fp, tok->id);
+ } else {
+ print_string(fp, str, strlen(str));
+ print_delim(fp, del);
+ print_1_byte(fp, tok->tt.arb.uc, "%u");
+ print_delim(fp, del);
+ for (i = 0; i < tok->tt.arb.uc; i++)
+ fprintf(fp, format,
+ *((u_int16_t *)(tok->tt.arb.data +
+ (size * i))));
+ }
+ break;
+
+ case AUR_INT32:
+ /* case AUR_INT: */
+ str = "int";
+ size = AUR_INT32_SIZE;
+ if (oflags & AU_OFLAG_XML) {
+ open_attr(fp, "type");
+ fprintf(fp, "%zu", size);
+ close_attr(fp);
+ open_attr(fp, "count");
+ print_1_byte(fp, tok->tt.arb.uc, "%u");
+ close_attr(fp);
+ fprintf(fp, ">");
+ for (i = 0; i < tok->tt.arb.uc; i++)
+ fprintf(fp, format,
+ *((u_int32_t *)(tok->tt.arb.data +
+ (size * i))));
+ close_tag(fp, tok->id);
+ } else {
+ print_string(fp, str, strlen(str));
+ print_delim(fp, del);
+ print_1_byte(fp, tok->tt.arb.uc, "%u");
+ print_delim(fp, del);
+ for (i = 0; i < tok->tt.arb.uc; i++)
+ fprintf(fp, format,
+ *((u_int32_t *)(tok->tt.arb.data +
+ (size * i))));
+ }
+ break;
+
+ case AUR_INT64:
+ str = "int64";
+ size = AUR_INT64_SIZE;
+ if (oflags & AU_OFLAG_XML) {
+ open_attr(fp, "type");
+ fprintf(fp, "%zu", size);
+ close_attr(fp);
+ open_attr(fp, "count");
+ print_1_byte(fp, tok->tt.arb.uc, "%u");
+ close_attr(fp);
+ fprintf(fp, ">");
+ for (i = 0; i < tok->tt.arb.uc; i++)
+ fprintf(fp, format,
+ *((u_int64_t *)(tok->tt.arb.data +
+ (size * i))));
+ close_tag(fp, tok->id);
+ } else {
+ print_string(fp, str, strlen(str));
+ print_delim(fp, del);
+ print_1_byte(fp, tok->tt.arb.uc, "%u");
+ print_delim(fp, del);
+ for (i = 0; i < tok->tt.arb.uc; i++)
+ fprintf(fp, format,
+ *((u_int64_t *)(tok->tt.arb.data +
+ (size * i))));
+ }
+ break;
+
+ default:
+ return;
+ }
+}
+
+/*
+ * file access mode 4 bytes
+ * owner user ID 4 bytes
+ * owner group ID 4 bytes
+ * file system ID 4 bytes
+ * node ID 8 bytes
+ * device 4 bytes/8 bytes (32-bit/64-bit)
+ */
+static int
+fetch_attr32_tok(tokenstr_t *tok, u_char *buf, int len)
+{
+ int err = 0;
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.attr32.mode, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.attr32.uid, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.attr32.gid, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.attr32.fsid, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT64(buf, len, tok->tt.attr32.nid, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.attr32.dev, tok->len, err);
+ if (err)
+ return (-1);
+
+ return (0);
+}
+
+static void
+print_attr32_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags)
+{
+
+ print_tok_type(fp, tok->id, "attribute", oflags);
+ if (oflags & AU_OFLAG_XML) {
+ open_attr(fp, "mode");
+ print_4_bytes(fp, tok->tt.attr32.mode, "%o");
+ close_attr(fp);
+ open_attr(fp, "uid");
+ print_user(fp, tok->tt.attr32.uid, oflags);
+ close_attr(fp);
+ open_attr(fp, "gid");
+ print_group(fp, tok->tt.attr32.gid, oflags);
+ close_attr(fp);
+ open_attr(fp, "fsid");
+ print_4_bytes(fp, tok->tt.attr32.fsid, "%u");
+ close_attr(fp);
+ open_attr(fp, "nodeid");
+ print_8_bytes(fp, tok->tt.attr32.nid, "%lld");
+ close_attr(fp);
+ open_attr(fp, "device");
+ print_4_bytes(fp, tok->tt.attr32.dev, "%u");
+ close_attr(fp);
+ close_tag(fp, tok->id);
+ } else {
+ print_delim(fp, del);
+ print_4_bytes(fp, tok->tt.attr32.mode, "%o");
+ print_delim(fp, del);
+ print_user(fp, tok->tt.attr32.uid, oflags);
+ print_delim(fp, del);
+ print_group(fp, tok->tt.attr32.gid, oflags);
+ print_delim(fp, del);
+ print_4_bytes(fp, tok->tt.attr32.fsid, "%u");
+ print_delim(fp, del);
+ print_8_bytes(fp, tok->tt.attr32.nid, "%lld");
+ print_delim(fp, del);
+ print_4_bytes(fp, tok->tt.attr32.dev, "%u");
+ }
+}
+
+/*
+ * file access mode 4 bytes
+ * owner user ID 4 bytes
+ * owner group ID 4 bytes
+ * file system ID 4 bytes
+ * node ID 8 bytes
+ * device 4 bytes/8 bytes (32-bit/64-bit)
+ */
+static int
+fetch_attr64_tok(tokenstr_t *tok, u_char *buf, int len)
+{
+ int err = 0;
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.attr64.mode, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.attr64.uid, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.attr64.gid, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.attr64.fsid, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT64(buf, len, tok->tt.attr64.nid, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT64(buf, len, tok->tt.attr64.dev, tok->len, err);
+ if (err)
+ return (-1);
+
+ return (0);
+}
+
+static void
+print_attr64_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags)
+{
+
+ print_tok_type(fp, tok->id, "attribute", oflags);
+ if (oflags & AU_OFLAG_XML) {
+ open_attr(fp, "mode");
+ print_4_bytes(fp, tok->tt.attr64.mode, "%o");
+ close_attr(fp);
+ open_attr(fp, "uid");
+ print_user(fp, tok->tt.attr64.uid, oflags);
+ close_attr(fp);
+ open_attr(fp, "gid");
+ print_group(fp, tok->tt.attr64.gid, oflags);
+ close_attr(fp);
+ open_attr(fp, "fsid");
+ print_4_bytes(fp, tok->tt.attr64.fsid, "%u");
+ close_attr(fp);
+ open_attr(fp, "nodeid");
+ print_8_bytes(fp, tok->tt.attr64.nid, "%lld");
+ close_attr(fp);
+ open_attr(fp, "device");
+ print_8_bytes(fp, tok->tt.attr64.dev, "%llu");
+ close_attr(fp);
+ close_tag(fp, tok->id);
+ } else {
+ print_delim(fp, del);
+ print_4_bytes(fp, tok->tt.attr64.mode, "%o");
+ print_delim(fp, del);
+ print_user(fp, tok->tt.attr64.uid, oflags);
+ print_delim(fp, del);
+ print_group(fp, tok->tt.attr64.gid, oflags);
+ print_delim(fp, del);
+ print_4_bytes(fp, tok->tt.attr64.fsid, "%u");
+ print_delim(fp, del);
+ print_8_bytes(fp, tok->tt.attr64.nid, "%lld");
+ print_delim(fp, del);
+ print_8_bytes(fp, tok->tt.attr64.dev, "%llu");
+ }
+}
+
+/*
+ * status 4 bytes
+ * return value 4 bytes
+ */
+static int
+fetch_exit_tok(tokenstr_t *tok, u_char *buf, int len)
+{
+ int err = 0;
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.exit.status, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.exit.ret, tok->len, err);
+ if (err)
+ return (-1);
+
+ return (0);
+}
+
+static void
+print_exit_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags)
+{
+
+ print_tok_type(fp, tok->id, "exit", oflags);
+ if (oflags & AU_OFLAG_XML) {
+ open_attr(fp, "errval");
+ print_errval(fp, tok->tt.exit.status);
+ close_attr(fp);
+ open_attr(fp, "retval");
+ print_4_bytes(fp, tok->tt.exit.ret, "%u");
+ close_attr(fp);
+ close_tag(fp, tok->id);
+ } else {
+ print_delim(fp, del);
+ print_errval(fp, tok->tt.exit.status);
+ print_delim(fp, del);
+ print_4_bytes(fp, tok->tt.exit.ret, "%u");
+ }
+}
+
+/*
+ * count 4 bytes
+ * text count null-terminated string(s)
+ */
+static int
+fetch_execarg_tok(tokenstr_t *tok, u_char *buf, int len)
+{
+ int err = 0;
+ u_int32_t i;
+ u_char *bptr;
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.execarg.count, tok->len, err);
+ if (err)
+ return (-1);
+
+ for (i = 0; i < tok->tt.execarg.count; i++) {
+ bptr = buf + tok->len;
+ if (i < AUDIT_MAX_ARGS)
+ tok->tt.execarg.text[i] = (char*)bptr;
+
+ /* Look for a null terminated string. */
+ while (bptr && (*bptr != '\0')) {
+ if (++tok->len >= (u_int32_t)len)
+ return (-1);
+ bptr = buf + tok->len;
+ }
+ if (!bptr)
+ return (-1);
+ tok->len++; /* \0 character */
+ }
+ if (tok->tt.execarg.count > AUDIT_MAX_ARGS)
+ tok->tt.execarg.count = AUDIT_MAX_ARGS;
+
+ return (0);
+}
+
+static void
+print_execarg_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags)
+{
+ u_int32_t i;
+
+ print_tok_type(fp, tok->id, "exec arg", oflags);
+ for (i = 0; i < tok->tt.execarg.count; i++) {
+ if (oflags & AU_OFLAG_XML) {
+ fprintf(fp, "<arg>");
+ print_xml_string(fp, tok->tt.execarg.text[i],
+ strlen(tok->tt.execarg.text[i]));
+ fprintf(fp, "</arg>");
+ } else {
+ print_delim(fp, del);
+ print_string(fp, tok->tt.execarg.text[i],
+ strlen(tok->tt.execarg.text[i]));
+ }
+ }
+ if (oflags & AU_OFLAG_XML)
+ close_tag(fp, tok->id);
+}
+
+/*
+ * count 4 bytes
+ * text count null-terminated string(s)
+ */
+static int
+fetch_execenv_tok(tokenstr_t *tok, u_char *buf, int len)
+{
+ int err = 0;
+ u_int32_t i;
+ u_char *bptr;
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.execenv.count, tok->len, err);
+ if (err)
+ return (-1);
+
+ for (i = 0; i < tok->tt.execenv.count; i++) {
+ bptr = buf + tok->len;
+ if (i < AUDIT_MAX_ENV)
+ tok->tt.execenv.text[i] = (char*)bptr;
+
+ /* Look for a null terminated string. */
+ while (bptr && (*bptr != '\0')) {
+ if (++tok->len >= (u_int32_t)len)
+ return (-1);
+ bptr = buf + tok->len;
+ }
+ if (!bptr)
+ return (-1);
+ tok->len++; /* \0 character */
+ }
+ if (tok->tt.execenv.count > AUDIT_MAX_ENV)
+ tok->tt.execenv.count = AUDIT_MAX_ENV;
+
+ return (0);
+}
+
+static void
+print_execenv_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags)
+{
+ u_int32_t i;
+
+ print_tok_type(fp, tok->id, "exec env", oflags);
+ for (i = 0; i< tok->tt.execenv.count; i++) {
+ if (oflags & AU_OFLAG_XML) {
+ fprintf(fp, "<env>");
+ print_xml_string(fp, tok->tt.execenv.text[i],
+ strlen(tok->tt.execenv.text[i]));
+ fprintf(fp, "</env>");
+ } else {
+ print_delim(fp, del);
+ print_string(fp, tok->tt.execenv.text[i],
+ strlen(tok->tt.execenv.text[i]));
+ }
+ }
+ if (oflags & AU_OFLAG_XML)
+ close_tag(fp, tok->id);
+}
+
+/*
+ * seconds of time 4 bytes
+ * milliseconds of time 4 bytes
+ * file name len 2 bytes
+ * file pathname N bytes + 1 terminating NULL byte
+ */
+static int
+fetch_file_tok(tokenstr_t *tok, u_char *buf, int len)
+{
+ int err = 0;
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.file.s, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.file.ms, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT16(buf, len, tok->tt.file.len, tok->len, err);
+ if (err)
+ return (-1);
+
+ SET_PTR((char*)buf, len, tok->tt.file.name, tok->tt.file.len, tok->len,
+ err);
+ if (err)
+ return (-1);
+
+ return (0);
+}
+
+static void
+print_file_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags)
+{
+
+ print_tok_type(fp, tok->id, "file", oflags);
+ if (oflags & AU_OFLAG_XML) {
+ open_attr(fp, "time");
+ print_sec32(fp, tok->tt.file.s, oflags);
+ close_attr(fp);
+ open_attr(fp, "msec");
+ print_msec32(fp, tok->tt.file.ms, oflags);
+ close_attr(fp);
+ fprintf(fp, ">");
+ print_string(fp, tok->tt.file.name, tok->tt.file.len);
+ close_tag(fp, tok->id);
+ } else {
+ print_delim(fp, del);
+ print_sec32(fp, tok->tt.file.s, oflags);
+ print_delim(fp, del);
+ print_msec32(fp, tok->tt.file.ms, oflags);
+ print_delim(fp, del);
+ print_string(fp, tok->tt.file.name, tok->tt.file.len);
+ }
+}
+
+/*
+ * number groups 2 bytes
+ * group list count * 4 bytes
+ */
+static int
+fetch_newgroups_tok(tokenstr_t *tok, u_char *buf, int len)
+{
+ int i;
+ int err = 0;
+
+ READ_TOKEN_U_INT16(buf, len, tok->tt.grps.no, tok->len, err);
+ if (err)
+ return (-1);
+
+ for (i = 0; i<tok->tt.grps.no; i++) {
+ READ_TOKEN_U_INT32(buf, len, tok->tt.grps.list[i], tok->len,
+ err);
+ if (err)
+ return (-1);
+ }
+
+ return (0);
+}
+
+static void
+print_newgroups_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags)
+{
+ int i;
+
+ print_tok_type(fp, tok->id, "group", oflags);
+ for (i = 0; i < tok->tt.grps.no; i++) {
+ if (oflags & AU_OFLAG_XML) {
+ fprintf(fp, "<gid>");
+ print_group(fp, tok->tt.grps.list[i], oflags);
+ fprintf(fp, "</gid>");
+ close_tag(fp, tok->id);
+ } else {
+ print_delim(fp, del);
+ print_group(fp, tok->tt.grps.list[i], oflags);
+ }
+ }
+}
+
+/*
+ * Internet addr 4 bytes
+ */
+static int
+fetch_inaddr_tok(tokenstr_t *tok, u_char *buf, int len)
+{
+ int err = 0;
+
+ READ_TOKEN_BYTES(buf, len, &tok->tt.inaddr.addr, sizeof(uint32_t),
+ tok->len, err);
+ if (err)
+ return (-1);
+
+ return (0);
+
+}
+
+static void
+print_inaddr_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags)
+{
+
+ print_tok_type(fp, tok->id, "ip addr", oflags);
+ if (oflags & AU_OFLAG_XML) {
+ print_ip_address(fp, tok->tt.inaddr.addr);
+ close_tag(fp, tok->id);
+ } else {
+ print_delim(fp, del);
+ print_ip_address(fp, tok->tt.inaddr.addr);
+ }
+}
+
+/*
+ * type 4 bytes
+ * address 16 bytes
+ */
+static int
+fetch_inaddr_ex_tok(tokenstr_t *tok, u_char *buf, int len)
+{
+ int err = 0;
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.inaddr_ex.type, tok->len, err);
+ if (err)
+ return (-1);
+
+ if (tok->tt.inaddr_ex.type == AU_IPv4) {
+ READ_TOKEN_BYTES(buf, len, &tok->tt.inaddr_ex.addr[0],
+ sizeof(tok->tt.inaddr_ex.addr[0]), tok->len, err);
+ if (err)
+ return (-1);
+ } else if (tok->tt.inaddr_ex.type == AU_IPv6) {
+ READ_TOKEN_BYTES(buf, len, tok->tt.inaddr_ex.addr,
+ sizeof(tok->tt.inaddr_ex.addr), tok->len, err);
+ if (err)
+ return (-1);
+ } else
+ return (-1);
+
+ return (0);
+}
+
+static void
+print_inaddr_ex_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags)
+{
+
+ print_tok_type(fp, tok->id, "ip addr ex", oflags);
+ if (oflags & AU_OFLAG_XML) {
+ print_ip_ex_address(fp, tok->tt.inaddr_ex.type,
+ tok->tt.inaddr_ex.addr);
+ close_tag(fp, tok->id);
+ } else {
+ print_delim(fp, del);
+ print_ip_ex_address(fp, tok->tt.inaddr_ex.type,
+ tok->tt.inaddr_ex.addr);
+ }
+}
+
+/*
+ * ip header 20 bytes
+ */
+static int
+fetch_ip_tok(tokenstr_t *tok, u_char *buf, int len)
+{
+ int err = 0;
+
+ READ_TOKEN_U_CHAR(buf, len, tok->tt.ip.version, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_CHAR(buf, len, tok->tt.ip.tos, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_BYTES(buf, len, &tok->tt.ip.len, sizeof(uint16_t),
+ tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_BYTES(buf, len, &tok->tt.ip.id, sizeof(uint16_t),
+ tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_BYTES(buf, len, &tok->tt.ip.offset, sizeof(uint16_t),
+ tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_CHAR(buf, len, tok->tt.ip.ttl, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_CHAR(buf, len, tok->tt.ip.prot, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_BYTES(buf, len, &tok->tt.ip.chksm, sizeof(uint16_t),
+ tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_BYTES(buf, len, &tok->tt.ip.src, sizeof(tok->tt.ip.src),
+ tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_BYTES(buf, len, &tok->tt.ip.dest, sizeof(tok->tt.ip.dest),
+ tok->len, err);
+ if (err)
+ return (-1);
+
+ return (0);
+}
+
+static void
+print_ip_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags)
+{
+
+ print_tok_type(fp, tok->id, "ip", oflags);
+ if (oflags & AU_OFLAG_XML) {
+ open_attr(fp, "version");
+ print_mem(fp, (u_char *)(&tok->tt.ip.version),
+ sizeof(u_char));
+ close_attr(fp);
+ open_attr(fp, "service_type");
+ print_mem(fp, (u_char *)(&tok->tt.ip.tos), sizeof(u_char));
+ close_attr(fp);
+ open_attr(fp, "len");
+ print_2_bytes(fp, ntohs(tok->tt.ip.len), "%u");
+ close_attr(fp);
+ open_attr(fp, "id");
+ print_2_bytes(fp, ntohs(tok->tt.ip.id), "%u");
+ close_attr(fp);
+ open_attr(fp, "offset");
+ print_2_bytes(fp, ntohs(tok->tt.ip.offset), "%u");
+ close_attr(fp);
+ open_attr(fp, "time_to_live");
+ print_mem(fp, (u_char *)(&tok->tt.ip.ttl), sizeof(u_char));
+ close_attr(fp);
+ open_attr(fp, "protocol");
+ print_mem(fp, (u_char *)(&tok->tt.ip.prot), sizeof(u_char));
+ close_attr(fp);
+ open_attr(fp, "cksum");
+ print_2_bytes(fp, ntohs(tok->tt.ip.chksm), "%u");
+ close_attr(fp);
+ open_attr(fp, "src_addr");
+ print_ip_address(fp, tok->tt.ip.src);
+ close_attr(fp);
+ open_attr(fp, "dest_addr");
+ print_ip_address(fp, tok->tt.ip.dest);
+ close_attr(fp);
+ close_tag(fp, tok->id);
+ } else {
+ print_delim(fp, del);
+ print_mem(fp, (u_char *)(&tok->tt.ip.version),
+ sizeof(u_char));
+ print_delim(fp, del);
+ print_mem(fp, (u_char *)(&tok->tt.ip.tos), sizeof(u_char));
+ print_delim(fp, del);
+ print_2_bytes(fp, ntohs(tok->tt.ip.len), "%u");
+ print_delim(fp, del);
+ print_2_bytes(fp, ntohs(tok->tt.ip.id), "%u");
+ print_delim(fp, del);
+ print_2_bytes(fp, ntohs(tok->tt.ip.offset), "%u");
+ print_delim(fp, del);
+ print_mem(fp, (u_char *)(&tok->tt.ip.ttl), sizeof(u_char));
+ print_delim(fp, del);
+ print_mem(fp, (u_char *)(&tok->tt.ip.prot), sizeof(u_char));
+ print_delim(fp, del);
+ print_2_bytes(fp, ntohs(tok->tt.ip.chksm), "%u");
+ print_delim(fp, del);
+ print_ip_address(fp, tok->tt.ip.src);
+ print_delim(fp, del);
+ print_ip_address(fp, tok->tt.ip.dest);
+ }
+}
+
+/*
+ * object ID type 1 byte
+ * Object ID 4 bytes
+ */
+static int
+fetch_ipc_tok(tokenstr_t *tok, u_char *buf, int len)
+{
+ int err = 0;
+
+ READ_TOKEN_U_CHAR(buf, len, tok->tt.ipc.type, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.ipc.id, tok->len, err);
+ if (err)
+ return (-1);
+
+ return (0);
+}
+
+static void
+print_ipc_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags)
+{
+
+ print_tok_type(fp, tok->id, "IPC", oflags);
+ if (oflags & AU_OFLAG_XML) {
+ open_attr(fp, "ipc-type");
+ print_ipctype(fp, tok->tt.ipc.type, oflags);
+ close_attr(fp);
+ open_attr(fp, "ipc-id");
+ print_4_bytes(fp, tok->tt.ipc.id, "%u");
+ close_attr(fp);
+ close_tag(fp, tok->id);
+ } else {
+ print_delim(fp, del);
+ print_ipctype(fp, tok->tt.ipc.type, oflags);
+ print_delim(fp, del);
+ print_4_bytes(fp, tok->tt.ipc.id, "%u");
+ }
+}
+
+/*
+ * owner user id 4 bytes
+ * owner group id 4 bytes
+ * creator user id 4 bytes
+ * creator group id 4 bytes
+ * access mode 4 bytes
+ * slot seq 4 bytes
+ * key 4 bytes
+ */
+static int
+fetch_ipcperm_tok(tokenstr_t *tok, u_char *buf, int len)
+{
+ int err = 0;
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.ipcperm.uid, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.ipcperm.gid, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.ipcperm.puid, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.ipcperm.pgid, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.ipcperm.mode, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.ipcperm.seq, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.ipcperm.key, tok->len, err);
+ if (err)
+ return (-1);
+
+ return (0);
+}
+
+static void
+print_ipcperm_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags)
+{
+
+ print_tok_type(fp, tok->id, "IPC perm", oflags);
+ if (oflags & AU_OFLAG_XML) {
+ open_attr(fp, "uid");
+ print_user(fp, tok->tt.ipcperm.uid, oflags);
+ close_attr(fp);
+ open_attr(fp, "gid");
+ print_group(fp, tok->tt.ipcperm.gid, oflags);
+ close_attr(fp);
+ open_attr(fp, "creator-uid");
+ print_user(fp, tok->tt.ipcperm.puid, oflags);
+ close_attr(fp);
+ open_attr(fp, "creator-gid");
+ print_group(fp, tok->tt.ipcperm.pgid, oflags);
+ close_attr(fp);
+ open_attr(fp, "mode");
+ print_4_bytes(fp, tok->tt.ipcperm.mode, "%o");
+ close_attr(fp);
+ open_attr(fp, "seq");
+ print_4_bytes(fp, tok->tt.ipcperm.seq, "%u");
+ close_attr(fp);
+ open_attr(fp, "key");
+ print_4_bytes(fp, tok->tt.ipcperm.key, "%u");
+ close_attr(fp);
+ close_tag(fp, tok->id);
+ } else {
+ print_delim(fp, del);
+ print_user(fp, tok->tt.ipcperm.uid, oflags);
+ print_delim(fp, del);
+ print_group(fp, tok->tt.ipcperm.gid, oflags);
+ print_delim(fp, del);
+ print_user(fp, tok->tt.ipcperm.puid, oflags);
+ print_delim(fp, del);
+ print_group(fp, tok->tt.ipcperm.pgid, oflags);
+ print_delim(fp, del);
+ print_4_bytes(fp, tok->tt.ipcperm.mode, "%o");
+ print_delim(fp, del);
+ print_4_bytes(fp, tok->tt.ipcperm.seq, "%u");
+ print_delim(fp, del);
+ print_4_bytes(fp, tok->tt.ipcperm.key, "%u");
+ }
+}
+
+/*
+ * port Ip address 2 bytes
+ */
+static int
+fetch_iport_tok(tokenstr_t *tok, u_char *buf, int len)
+{
+ int err = 0;
+
+ READ_TOKEN_BYTES(buf, len, &tok->tt.iport.port, sizeof(uint16_t),
+ tok->len, err);
+ if (err)
+ return (-1);
+
+ return (0);
+}
+
+static void
+print_iport_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags)
+{
+
+ print_tok_type(fp, tok->id, "ip port", oflags);
+ if (oflags & AU_OFLAG_XML) {
+ print_2_bytes(fp, ntohs(tok->tt.iport.port), "%#x");
+ close_tag(fp, tok->id);
+ } else {
+ print_delim(fp, del);
+ print_2_bytes(fp, ntohs(tok->tt.iport.port), "%#x");
+ }
+}
+
+/*
+ * size 2 bytes
+ * data size bytes
+ */
+static int
+fetch_opaque_tok(tokenstr_t *tok, u_char *buf, int len)
+{
+ int err = 0;
+
+ READ_TOKEN_U_INT16(buf, len, tok->tt.opaque.size, tok->len, err);
+ if (err)
+ return (-1);
+
+ SET_PTR((char*)buf, len, tok->tt.opaque.data, tok->tt.opaque.size,
+ tok->len, err);
+ if (err)
+ return (-1);
+
+ return (0);
+}
+
+static void
+print_opaque_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags)
+{
+
+ print_tok_type(fp, tok->id, "opaque", oflags);
+ if (oflags & AU_OFLAG_XML) {
+ print_mem(fp, (u_char*)tok->tt.opaque.data,
+ tok->tt.opaque.size);
+ close_tag(fp, tok->id);
+ } else {
+ print_delim(fp, del);
+ print_2_bytes(fp, tok->tt.opaque.size, "%u");
+ print_delim(fp, del);
+ print_mem(fp, (u_char*)tok->tt.opaque.data,
+ tok->tt.opaque.size);
+ }
+}
+
+/*
+ * size 2 bytes
+ * data size bytes
+ */
+static int
+fetch_path_tok(tokenstr_t *tok, u_char *buf, int len)
+{
+ int err = 0;
+
+ READ_TOKEN_U_INT16(buf, len, tok->tt.path.len, tok->len, err);
+ if (err)
+ return (-1);
+
+ SET_PTR((char*)buf, len, tok->tt.path.path, tok->tt.path.len, tok->len,
+ err);
+ if (err)
+ return (-1);
+
+ return (0);
+}
+
+static void
+print_path_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags)
+{
+
+ print_tok_type(fp, tok->id, "path", oflags);
+ if (oflags & AU_OFLAG_XML) {
+ print_string(fp, tok->tt.path.path, tok->tt.path.len);
+ close_tag(fp, tok->id);
+ } else {
+ print_delim(fp, del);
+ print_string(fp, tok->tt.path.path, tok->tt.path.len);
+ }
+}
+
+/*
+ * token ID 1 byte
+ * audit ID 4 bytes
+ * euid 4 bytes
+ * egid 4 bytes
+ * ruid 4 bytes
+ * rgid 4 bytes
+ * pid 4 bytes
+ * sessid 4 bytes
+ * terminal ID
+ * portid 4 bytes
+ * machine id 4 bytes
+ */
+static int
+fetch_process32_tok(tokenstr_t *tok, u_char *buf, int len)
+{
+ int err = 0;
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.proc32.auid, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.proc32.euid, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.proc32.egid, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.proc32.ruid, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.proc32.rgid, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.proc32.pid, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.proc32.sid, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.proc32.tid.port, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_BYTES(buf, len, &tok->tt.proc32.tid.addr,
+ sizeof(tok->tt.proc32.tid.addr), tok->len, err);
+ if (err)
+ return (-1);
+
+ return (0);
+}
+
+static void
+print_process32_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags)
+{
+
+ print_tok_type(fp, tok->id, "process", oflags);
+ if (oflags & AU_OFLAG_XML) {
+ open_attr(fp, "audit-uid");
+ print_user(fp, tok->tt.proc32.auid, oflags);
+ close_attr(fp);
+ open_attr(fp, "uid");
+ print_user(fp, tok->tt.proc32.euid, oflags);
+ close_attr(fp);
+ open_attr(fp, "gid");
+ print_group(fp, tok->tt.proc32.egid, oflags);
+ close_attr(fp);
+ open_attr(fp, "ruid");
+ print_user(fp, tok->tt.proc32.ruid, oflags);
+ close_attr(fp);
+ open_attr(fp, "rgid");
+ print_group(fp, tok->tt.proc32.rgid, oflags);
+ close_attr(fp);
+ open_attr(fp, "pid");
+ print_4_bytes(fp, tok->tt.proc32.pid, "%u");
+ close_attr(fp);
+ open_attr(fp, "sid");
+ print_4_bytes(fp, tok->tt.proc32.sid, "%u");
+ close_attr(fp);
+ open_attr(fp, "tid");
+ print_4_bytes(fp, tok->tt.proc32.tid.port, "%u");
+ print_ip_address(fp, tok->tt.proc32.tid.addr);
+ close_attr(fp);
+ close_tag(fp, tok->id);
+ } else {
+ print_delim(fp, del);
+ print_user(fp, tok->tt.proc32.auid, oflags);
+ print_delim(fp, del);
+ print_user(fp, tok->tt.proc32.euid, oflags);
+ print_delim(fp, del);
+ print_group(fp, tok->tt.proc32.egid, oflags);
+ print_delim(fp, del);
+ print_user(fp, tok->tt.proc32.ruid, oflags);
+ print_delim(fp, del);
+ print_group(fp, tok->tt.proc32.rgid, oflags);
+ print_delim(fp, del);
+ print_4_bytes(fp, tok->tt.proc32.pid, "%u");
+ print_delim(fp, del);
+ print_4_bytes(fp, tok->tt.proc32.sid, "%u");
+ print_delim(fp, del);
+ print_4_bytes(fp, tok->tt.proc32.tid.port, "%u");
+ print_delim(fp, del);
+ print_ip_address(fp, tok->tt.proc32.tid.addr);
+ }
+}
+
+/*
+ * token ID 1 byte
+ * audit ID 4 bytes
+ * euid 4 bytes
+ * egid 4 bytes
+ * ruid 4 bytes
+ * rgid 4 bytes
+ * pid 4 bytes
+ * sessid 4 bytes
+ * terminal ID
+ * portid 8 bytes
+ * machine id 4 bytes
+ */
+static int
+fetch_process64_tok(tokenstr_t *tok, u_char *buf, int len)
+{
+ int err = 0;
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.proc64.auid, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.proc64.euid, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.proc64.egid, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.proc64.ruid, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.proc64.rgid, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.proc64.pid, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.proc64.sid, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT64(buf, len, tok->tt.proc64.tid.port, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_BYTES(buf, len, &tok->tt.proc64.tid.addr,
+ sizeof(tok->tt.proc64.tid.addr), tok->len, err);
+ if (err)
+ return (-1);
+
+ return (0);
+}
+
+static void
+print_process64_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags)
+{
+ print_tok_type(fp, tok->id, "process", oflags);
+ if (oflags & AU_OFLAG_XML) {
+ open_attr(fp, "audit-uid");
+ print_user(fp, tok->tt.proc64.auid, oflags);
+ close_attr(fp);
+ open_attr(fp, "uid");
+ print_user(fp, tok->tt.proc64.euid, oflags);
+ close_attr(fp);
+ open_attr(fp, "gid");
+ print_group(fp, tok->tt.proc64.egid, oflags);
+ close_attr(fp);
+ open_attr(fp, "ruid");
+ print_user(fp, tok->tt.proc64.ruid, oflags);
+ close_attr(fp);
+ open_attr(fp, "rgid");
+ print_group(fp, tok->tt.proc64.rgid, oflags);
+ close_attr(fp);
+ open_attr(fp, "pid");
+ print_4_bytes(fp, tok->tt.proc64.pid, "%u");
+ close_attr(fp);
+ open_attr(fp, "sid");
+ print_4_bytes(fp, tok->tt.proc64.sid, "%u");
+ close_attr(fp);
+ open_attr(fp, "tid");
+ print_8_bytes(fp, tok->tt.proc64.tid.port, "%llu");
+ print_ip_address(fp, tok->tt.proc64.tid.addr);
+ close_attr(fp);
+ close_tag(fp, tok->id);
+ } else {
+ print_delim(fp, del);
+ print_user(fp, tok->tt.proc64.auid, oflags);
+ print_delim(fp, del);
+ print_user(fp, tok->tt.proc64.euid, oflags);
+ print_delim(fp, del);
+ print_group(fp, tok->tt.proc64.egid, oflags);
+ print_delim(fp, del);
+ print_user(fp, tok->tt.proc64.ruid, oflags);
+ print_delim(fp, del);
+ print_group(fp, tok->tt.proc64.rgid, oflags);
+ print_delim(fp, del);
+ print_4_bytes(fp, tok->tt.proc64.pid, "%u");
+ print_delim(fp, del);
+ print_4_bytes(fp, tok->tt.proc64.sid, "%u");
+ print_delim(fp, del);
+ print_8_bytes(fp, tok->tt.proc64.tid.port, "%llu");
+ print_delim(fp, del);
+ print_ip_address(fp, tok->tt.proc64.tid.addr);
+ }
+}
+
+/*
+ * token ID 1 byte
+ * audit ID 4 bytes
+ * effective user ID 4 bytes
+ * effective group ID 4 bytes
+ * real user ID 4 bytes
+ * real group ID 4 bytes
+ * process ID 4 bytes
+ * session ID 4 bytes
+ * terminal ID
+ * port ID 4 bytes
+ * address type-len 4 bytes
+ * machine address 16 bytes
+ */
+static int
+fetch_process32ex_tok(tokenstr_t *tok, u_char *buf, int len)
+{
+ int err = 0;
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.proc32_ex.auid, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.proc32_ex.euid, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.proc32_ex.egid, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.proc32_ex.ruid, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.proc32_ex.rgid, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.proc32_ex.pid, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.proc32_ex.sid, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.proc32_ex.tid.port, tok->len,
+ err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.proc32_ex.tid.type, tok->len,
+ err);
+ if (err)
+ return (-1);
+
+ if (tok->tt.proc32_ex.tid.type == AU_IPv4) {
+ READ_TOKEN_BYTES(buf, len, &tok->tt.proc32_ex.tid.addr[0],
+ sizeof(tok->tt.proc32_ex.tid.addr[0]), tok->len, err);
+ if (err)
+ return (-1);
+ } else if (tok->tt.proc32_ex.tid.type == AU_IPv6) {
+ READ_TOKEN_BYTES(buf, len, tok->tt.proc32_ex.tid.addr,
+ sizeof(tok->tt.proc32_ex.tid.addr), tok->len, err);
+ if (err)
+ return (-1);
+ } else
+ return (-1);
+
+ return (0);
+}
+
+static void
+print_process32ex_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags)
+{
+
+ print_tok_type(fp, tok->id, "process_ex", oflags);
+ if (oflags & AU_OFLAG_XML) {
+ open_attr(fp, "audit-uid");
+ print_user(fp, tok->tt.proc32_ex.auid, oflags);
+ close_attr(fp);
+ open_attr(fp, "uid");
+ print_user(fp, tok->tt.proc32_ex.euid, oflags);
+ close_attr(fp);
+ open_attr(fp, "gid");
+ print_group(fp, tok->tt.proc32_ex.egid, oflags);
+ close_attr(fp);
+ open_attr(fp, "ruid");
+ print_user(fp, tok->tt.proc32_ex.ruid, oflags);
+ close_attr(fp);
+ open_attr(fp, "rgid");
+ print_group(fp, tok->tt.proc32_ex.rgid, oflags);
+ close_attr(fp);
+ open_attr(fp, "pid");
+ print_4_bytes(fp, tok->tt.proc32_ex.pid, "%u");
+ close_attr(fp);
+ open_attr(fp, "sid");
+ print_4_bytes(fp, tok->tt.proc32_ex.sid, "%u");
+ close_attr(fp);
+ open_attr(fp, "tid");
+ print_4_bytes(fp, tok->tt.proc32_ex.tid.port, "%u");
+ print_ip_ex_address(fp, tok->tt.proc32_ex.tid.type,
+ tok->tt.proc32_ex.tid.addr);
+ close_attr(fp);
+ close_tag(fp, tok->id);
+ } else {
+ print_delim(fp, del);
+ print_user(fp, tok->tt.proc32_ex.auid, oflags);
+ print_delim(fp, del);
+ print_user(fp, tok->tt.proc32_ex.euid, oflags);
+ print_delim(fp, del);
+ print_group(fp, tok->tt.proc32_ex.egid, oflags);
+ print_delim(fp, del);
+ print_user(fp, tok->tt.proc32_ex.ruid, oflags);
+ print_delim(fp, del);
+ print_group(fp, tok->tt.proc32_ex.rgid, oflags);
+ print_delim(fp, del);
+ print_4_bytes(fp, tok->tt.proc32_ex.pid, "%u");
+ print_delim(fp, del);
+ print_4_bytes(fp, tok->tt.proc32_ex.sid, "%u");
+ print_delim(fp, del);
+ print_4_bytes(fp, tok->tt.proc32_ex.tid.port, "%u");
+ print_delim(fp, del);
+ print_ip_ex_address(fp, tok->tt.proc32_ex.tid.type,
+ tok->tt.proc32_ex.tid.addr);
+ }
+}
+
+/*
+ * token ID 1 byte
+ * audit ID 4 bytes
+ * effective user ID 4 bytes
+ * effective group ID 4 bytes
+ * real user ID 4 bytes
+ * real group ID 4 bytes
+ * process ID 4 bytes
+ * session ID 4 bytes
+ * terminal ID
+ * port ID 8 bytes
+ * address type-len 4 bytes
+ * machine address 16 bytes
+ */
+static int
+fetch_process64ex_tok(tokenstr_t *tok, u_char *buf, int len)
+{
+ int err = 0;
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.proc64_ex.auid, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.proc64_ex.euid, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.proc64_ex.egid, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.proc64_ex.ruid, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.proc64_ex.rgid, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.proc64_ex.pid, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.proc64_ex.sid, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT64(buf, len, tok->tt.proc64_ex.tid.port, tok->len,
+ err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.proc64_ex.tid.type, tok->len,
+ err);
+ if (err)
+ return (-1);
+
+ if (tok->tt.proc64_ex.tid.type == AU_IPv4) {
+ READ_TOKEN_BYTES(buf, len, &tok->tt.proc64_ex.tid.addr[0],
+ sizeof(tok->tt.proc64_ex.tid.addr[0]), tok->len, err);
+ if (err)
+ return (-1);
+ } else if (tok->tt.proc64_ex.tid.type == AU_IPv6) {
+ READ_TOKEN_BYTES(buf, len, tok->tt.proc64_ex.tid.addr,
+ sizeof(tok->tt.proc64_ex.tid.addr), tok->len, err);
+ if (err)
+ return (-1);
+ } else
+ return (-1);
+
+ return (0);
+}
+
+static void
+print_process64ex_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags)
+{
+ print_tok_type(fp, tok->id, "process_ex", oflags);
+ if (oflags & AU_OFLAG_XML) {
+ open_attr(fp, "audit-uid");
+ print_user(fp, tok->tt.proc64_ex.auid, oflags);
+ close_attr(fp);
+ open_attr(fp, "uid");
+ print_user(fp, tok->tt.proc64_ex.euid, oflags);
+ close_attr(fp);
+ open_attr(fp, "gid");
+ print_group(fp, tok->tt.proc64_ex.egid, oflags);
+ close_attr(fp);
+ open_attr(fp, "ruid");
+ print_user(fp, tok->tt.proc64_ex.ruid, oflags);
+ close_attr(fp);
+ open_attr(fp, "rgid");
+ print_group(fp, tok->tt.proc64_ex.rgid, oflags);
+ close_attr(fp);
+ open_attr(fp, "pid");
+ print_4_bytes(fp, tok->tt.proc64_ex.pid, "%u");
+ close_attr(fp);
+ open_attr(fp, "sid");
+ print_4_bytes(fp, tok->tt.proc64_ex.sid, "%u");
+ close_attr(fp);
+ open_attr(fp, "tid");
+ print_8_bytes(fp, tok->tt.proc64_ex.tid.port, "%llu");
+ print_ip_ex_address(fp, tok->tt.proc64_ex.tid.type,
+ tok->tt.proc64_ex.tid.addr);
+ close_attr(fp);
+ close_tag(fp, tok->id);
+ } else {
+ print_delim(fp, del);
+ print_user(fp, tok->tt.proc64_ex.auid, oflags);
+ print_delim(fp, del);
+ print_user(fp, tok->tt.proc64_ex.euid, oflags);
+ print_delim(fp, del);
+ print_group(fp, tok->tt.proc64_ex.egid, oflags);
+ print_delim(fp, del);
+ print_user(fp, tok->tt.proc64_ex.ruid, oflags);
+ print_delim(fp, del);
+ print_group(fp, tok->tt.proc64_ex.rgid, oflags);
+ print_delim(fp, del);
+ print_4_bytes(fp, tok->tt.proc64_ex.pid, "%u");
+ print_delim(fp, del);
+ print_4_bytes(fp, tok->tt.proc64_ex.sid, "%u");
+ print_delim(fp, del);
+ print_8_bytes(fp, tok->tt.proc64_ex.tid.port, "%llu");
+ print_delim(fp, del);
+ print_ip_ex_address(fp, tok->tt.proc64_ex.tid.type,
+ tok->tt.proc64_ex.tid.addr);
+ }
+}
+
+/*
+ * errno 1 byte
+ * return value 4 bytes
+ */
+static int
+fetch_return32_tok(tokenstr_t *tok, u_char *buf, int len)
+{
+ int err = 0;
+
+ READ_TOKEN_U_CHAR(buf, len, tok->tt.ret32.status, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.ret32.ret, tok->len, err);
+ if (err)
+ return (-1);
+
+ return (0);
+}
+
+static void
+print_return32_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags)
+{
+
+ print_tok_type(fp, tok->id, "return", oflags);
+ if (oflags & AU_OFLAG_XML) {
+ open_attr(fp ,"errval");
+ print_retval(fp, tok->tt.ret32.status, oflags);
+ close_attr(fp);
+ open_attr(fp, "retval");
+ print_4_bytes(fp, tok->tt.ret32.ret, "%u");
+ close_attr(fp);
+ close_tag(fp, tok->id);
+ } else {
+ print_delim(fp, del);
+ print_retval(fp, tok->tt.ret32.status, oflags);
+ print_delim(fp, del);
+ print_4_bytes(fp, tok->tt.ret32.ret, "%u");
+ }
+}
+
+static int
+fetch_return64_tok(tokenstr_t *tok, u_char *buf, int len)
+{
+ int err = 0;
+
+ READ_TOKEN_U_CHAR(buf, len, tok->tt.ret64.err, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT64(buf, len, tok->tt.ret64.val, tok->len, err);
+ if (err)
+ return (-1);
+
+ return (0);
+}
+
+static void
+print_return64_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags)
+{
+
+ print_tok_type(fp, tok->id, "return", oflags);
+ if (oflags & AU_OFLAG_XML) {
+ open_attr(fp, "errval");
+ print_retval(fp, tok->tt.ret64.err, oflags);
+ close_attr(fp);
+ open_attr(fp, "retval");
+ print_8_bytes(fp, tok->tt.ret64.val, "%lld");
+ close_attr(fp);
+ close_tag(fp, tok->id);
+ } else {
+ print_delim(fp, del);
+ print_retval(fp, tok->tt.ret64.err, oflags);
+ print_delim(fp, del);
+ print_8_bytes(fp, tok->tt.ret64.val, "%lld");
+ }
+}
+
+/*
+ * seq 4 bytes
+ */
+static int
+fetch_seq_tok(tokenstr_t *tok, u_char *buf, int len)
+{
+ int err = 0;
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.seq.seqno, tok->len, err);
+ if (err)
+ return (-1);
+
+ return (0);
+}
+
+static void
+print_seq_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags)
+{
+
+ print_tok_type(fp, tok->id, "sequence", oflags);
+ if (oflags & AU_OFLAG_XML) {
+ open_attr(fp, "seq-num");
+ print_4_bytes(fp, tok->tt.seq.seqno, "%u");
+ close_attr(fp);
+ close_tag(fp, tok->id);
+ } else {
+ print_delim(fp, del);
+ print_4_bytes(fp, tok->tt.seq.seqno, "%u");
+ }
+}
+
+/*
+ * socket family 2 bytes
+ * local port 2 bytes
+ * socket address 4 bytes
+ */
+static int
+fetch_sock_inet32_tok(tokenstr_t *tok, u_char *buf, int len)
+{
+ int err = 0;
+
+ READ_TOKEN_U_INT16(buf, len, tok->tt.sockinet_ex32.family, tok->len,
+ err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_BYTES(buf, len, &tok->tt.sockinet_ex32.port,
+ sizeof(uint16_t), tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_BYTES(buf, len, &tok->tt.sockinet_ex32.addr,
+ sizeof(tok->tt.sockinet_ex32.addr[0]), tok->len, err);
+ if (err)
+ return (-1);
+
+ return (0);
+}
+
+static void
+print_sock_inet32_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags)
+{
+
+ print_tok_type(fp, tok->id, "socket-inet", oflags);
+ if (oflags & AU_OFLAG_XML) {
+ open_attr(fp, "type");
+ print_2_bytes(fp, tok->tt.sockinet_ex32.family, "%u");
+ close_attr(fp);
+ open_attr(fp, "port");
+ print_2_bytes(fp, ntohs(tok->tt.sockinet_ex32.port), "%u");
+ close_attr(fp);
+ open_attr(fp, "addr");
+ print_ip_address(fp, tok->tt.sockinet_ex32.addr[0]);
+ close_attr(fp);
+ close_tag(fp, tok->id);
+ } else {
+ print_delim(fp, del);
+ print_2_bytes(fp, tok->tt.sockinet_ex32.family, "%u");
+ print_delim(fp, del);
+ print_2_bytes(fp, ntohs(tok->tt.sockinet_ex32.port), "%u");
+ print_delim(fp, del);
+ print_ip_address(fp, tok->tt.sockinet_ex32.addr[0]);
+ }
+}
+
+/*
+ * socket family 2 bytes
+ * local port 2 bytes
+ * socket address 16 bytes
+ */
+static int
+fetch_sock_inet128_tok(tokenstr_t *tok, u_char *buf, int len)
+{
+ int err = 0;
+
+ READ_TOKEN_U_INT16(buf, len, tok->tt.sockinet_ex32.family, tok->len,
+ err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_BYTES(buf, len, &tok->tt.sockinet_ex32.port,
+ sizeof(uint16_t), tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_BYTES(buf, len, &tok->tt.sockinet_ex32.addr,
+ sizeof(tok->tt.sockinet_ex32.addr), tok->len, err);
+ if (err)
+ return (-1);
+
+ return (0);
+}
+
+static void
+print_sock_inet128_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags)
+{
+
+ print_tok_type(fp, tok->id, "socket-inet6", oflags);
+ if (oflags & AU_OFLAG_XML) {
+ open_attr(fp, "type");
+ print_2_bytes(fp, tok->tt.sockinet_ex32.family, "%u");
+ close_attr(fp);
+ open_attr(fp, "port");
+ print_2_bytes(fp, ntohs(tok->tt.sockinet_ex32.port), "%u");
+ close_attr(fp);
+ open_attr(fp, "addr");
+ print_ip_ex_address(fp, AU_IPv6, tok->tt.sockinet_ex32.addr);
+ close_attr(fp);
+ close_tag(fp, tok->id);
+ } else {
+ print_delim(fp, del);
+ print_2_bytes(fp, tok->tt.sockinet_ex32.family, "%u");
+ print_delim(fp, del);
+ print_2_bytes(fp, ntohs(tok->tt.sockinet_ex32.port), "%u");
+ print_delim(fp, del);
+ print_ip_ex_address(fp, AU_IPv6, tok->tt.sockinet_ex32.addr);
+ }
+}
+
+/*
+ * socket family 2 bytes
+ * path (up to) 104 bytes + NULL (NULL terminated string).
+ */
+static int
+fetch_sock_unix_tok(tokenstr_t *tok, u_char *buf, int len)
+{
+ int err = 0;
+ u_char *p;
+ int slen;
+
+
+ READ_TOKEN_U_INT16(buf, len, tok->tt.sockunix.family, tok->len, err);
+ if (err)
+ return (-1);
+
+ /* slen = strnlen((buf + tok->len), 104) + 1; */
+ p = (u_char *)memchr((const void *)(buf + tok->len), '\0', 104);
+ slen = (p ? (int)(p - (buf + tok->len)) : 104) + 1;
+
+ READ_TOKEN_BYTES(buf, len, tok->tt.sockunix.path, slen, tok->len, err);
+ if (err)
+ return (-1);
+
+ return (0);
+}
+
+static void
+print_sock_unix_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags)
+{
+
+ print_tok_type(fp, tok->id, "socket-unix", oflags);
+ if (oflags & AU_OFLAG_XML) {
+ open_attr(fp, "type");
+ print_2_bytes(fp, tok->tt.sockunix.family, "%u");
+ close_attr(fp);
+ open_attr(fp, "port");
+ close_attr(fp);
+ open_attr(fp, "addr");
+ print_string(fp, tok->tt.sockunix.path,
+ strlen(tok->tt.sockunix.path));
+ close_attr(fp);
+ close_tag(fp, tok->id);
+ } else {
+ print_delim(fp, del);
+ print_2_bytes(fp, tok->tt.sockunix.family, "%u");
+ print_delim(fp, del);
+ print_string(fp, tok->tt.sockunix.path,
+ strlen(tok->tt.sockunix.path));
+ }
+}
+
+/*
+ * socket type 2 bytes
+ * local port 2 bytes
+ * local address 4 bytes
+ * remote port 2 bytes
+ * remote address 4 bytes
+ */
+static int
+fetch_socket_tok(tokenstr_t *tok, u_char *buf, int len)
+{
+ int err = 0;
+
+ READ_TOKEN_U_INT16(buf, len, tok->tt.socket.type, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_BYTES(buf, len, &tok->tt.socket.l_port, sizeof(uint16_t),
+ tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_BYTES(buf, len, &tok->tt.socket.l_addr,
+ sizeof(tok->tt.socket.l_addr), tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_BYTES(buf, len, &tok->tt.socket.r_port, sizeof(uint16_t),
+ tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_BYTES(buf, len, &tok->tt.socket.l_addr,
+ sizeof(tok->tt.socket.r_addr), tok->len, err);
+ if (err)
+ return (-1);
+
+ return (0);
+}
+
+static void
+print_socket_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags)
+{
+
+ print_tok_type(fp, tok->id, "socket", oflags);
+ if (oflags & AU_OFLAG_XML) {
+ open_attr(fp, "sock_type");
+ print_2_bytes(fp, tok->tt.socket.type, "%u");
+ close_attr(fp);
+ open_attr(fp, "lport");
+ print_2_bytes(fp, ntohs(tok->tt.socket.l_port), "%u");
+ close_attr(fp);
+ open_attr(fp, "laddr");
+ print_ip_address(fp, tok->tt.socket.l_addr);
+ close_attr(fp);
+ open_attr(fp, "fport");
+ print_2_bytes(fp, ntohs(tok->tt.socket.r_port), "%u");
+ close_attr(fp);
+ open_attr(fp, "faddr");
+ print_ip_address(fp, tok->tt.socket.r_addr);
+ close_attr(fp);
+ close_tag(fp, tok->id);
+ } else {
+ print_delim(fp, del);
+ print_2_bytes(fp, tok->tt.socket.type, "%u");
+ print_delim(fp, del);
+ print_2_bytes(fp, ntohs(tok->tt.socket.l_port), "%u");
+ print_delim(fp, del);
+ print_ip_address(fp, tok->tt.socket.l_addr);
+ print_delim(fp, del);
+ print_2_bytes(fp, ntohs(tok->tt.socket.r_port), "%u");
+ print_delim(fp, del);
+ print_ip_address(fp, tok->tt.socket.r_addr);
+ }
+}
+
+/*
+ * audit ID 4 bytes
+ * euid 4 bytes
+ * egid 4 bytes
+ * ruid 4 bytes
+ * rgid 4 bytes
+ * pid 4 bytes
+ * sessid 4 bytes
+ * terminal ID
+ * portid 4 bytes/8 bytes (32-bit/64-bit value)
+ * machine id 4 bytes
+ */
+static int
+fetch_subject32_tok(tokenstr_t *tok, u_char *buf, int len)
+{
+ int err = 0;
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.subj32.auid, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.subj32.euid, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.subj32.egid, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.subj32.ruid, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.subj32.rgid, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.subj32.pid, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.subj32.sid, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.subj32.tid.port, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_BYTES(buf, len, &tok->tt.subj32.tid.addr,
+ sizeof(tok->tt.subj32.tid.addr), tok->len, err);
+ if (err)
+ return (-1);
+
+ return (0);
+}
+
+static void
+print_subject32_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags)
+{
+
+ print_tok_type(fp, tok->id, "subject", oflags);
+ if (oflags & AU_OFLAG_XML) {
+ open_attr(fp, "audit-uid");
+ print_user(fp, tok->tt.subj32.auid, oflags);
+ close_attr(fp);
+ open_attr(fp, "uid");
+ print_user(fp, tok->tt.subj32.euid, oflags);
+ close_attr(fp);
+ open_attr(fp, "gid");
+ print_group(fp, tok->tt.subj32.egid, oflags);
+ close_attr(fp);
+ open_attr(fp, "ruid");
+ print_user(fp, tok->tt.subj32.ruid, oflags);
+ close_attr(fp);
+ open_attr(fp, "rgid");
+ print_group(fp, tok->tt.subj32.rgid, oflags);
+ close_attr(fp);
+ open_attr(fp,"pid");
+ print_4_bytes(fp, tok->tt.subj32.pid, "%u");
+ close_attr(fp);
+ open_attr(fp,"sid");
+ print_4_bytes(fp, tok->tt.subj32.sid, "%u");
+ close_attr(fp);
+ open_attr(fp,"tid");
+ print_4_bytes(fp, tok->tt.subj32.tid.port, "%u ");
+ print_ip_address(fp, tok->tt.subj32.tid.addr);
+ close_attr(fp);
+ close_tag(fp, tok->id);
+ } else {
+ print_delim(fp, del);
+ print_user(fp, tok->tt.subj32.auid, oflags);
+ print_delim(fp, del);
+ print_user(fp, tok->tt.subj32.euid, oflags);
+ print_delim(fp, del);
+ print_group(fp, tok->tt.subj32.egid, oflags);
+ print_delim(fp, del);
+ print_user(fp, tok->tt.subj32.ruid, oflags);
+ print_delim(fp, del);
+ print_group(fp, tok->tt.subj32.rgid, oflags);
+ print_delim(fp, del);
+ print_4_bytes(fp, tok->tt.subj32.pid, "%u");
+ print_delim(fp, del);
+ print_4_bytes(fp, tok->tt.subj32.sid, "%u");
+ print_delim(fp, del);
+ print_4_bytes(fp, tok->tt.subj32.tid.port, "%u");
+ print_delim(fp, del);
+ print_ip_address(fp, tok->tt.subj32.tid.addr);
+ }
+}
+
+static void
+print_upriv_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags)
+{
+
+ print_tok_type(fp, tok->id, "use of privilege", oflags);
+ if (oflags & AU_OFLAG_XML) {
+ open_attr(fp, "status");
+ if (tok->tt.priv.sorf)
+ (void) fprintf(fp, "successful use of priv");
+ else
+ (void) fprintf(fp, "failed use of priv");
+ close_attr(fp);
+ open_attr(fp, "name");
+ print_string(fp, tok->tt.priv.priv, tok->tt.priv.privstrlen);
+ close_attr(fp);
+ close_tag(fp, tok->id);
+ } else {
+ print_delim(fp, del);
+ if (tok->tt.priv.sorf)
+ (void) fprintf(fp, "successful use of priv");
+ else
+ (void) fprintf(fp, "failed use of priv");
+ print_delim(fp, del);
+ print_string(fp, tok->tt.priv.priv, tok->tt.priv.privstrlen);
+ }
+}
+
+/*
+ * status 1 byte
+ * privstrlen 2 bytes
+ * priv N bytes + 1 (\0 byte)
+ */
+static int
+fetch_priv_tok(tokenstr_t *tok, u_char *buf, int len)
+{
+ int err = 0;
+
+ READ_TOKEN_U_CHAR(buf, len, tok->tt.priv.sorf, tok->len, err);
+ if (err)
+ return (-1);
+ READ_TOKEN_U_INT16(buf, len, tok->tt.priv.privstrlen, tok->len, err);
+ if (err)
+ return (-1);
+ SET_PTR((char *)buf, len, tok->tt.priv.priv, tok->tt.priv.privstrlen,
+ tok->len, err);
+ if (err)
+ return (-1);
+ return (0);
+}
+
+/*
+ * privtstrlen 1 byte
+ * privtstr N bytes + 1
+ * privstrlen 1 byte
+ * privstr N bytes + 1
+ */
+static int
+fetch_privset_tok(tokenstr_t *tok, u_char *buf, int len)
+{
+ int err = 0;
+
+ READ_TOKEN_U_INT16(buf, len, tok->tt.privset.privtstrlen,
+ tok->len, err);
+ if (err)
+ return (-1);
+ SET_PTR((char *)buf, len, tok->tt.privset.privtstr,
+ tok->tt.privset.privtstrlen, tok->len, err);
+ if (err)
+ return (-1);
+ READ_TOKEN_U_INT16(buf, len, tok->tt.privset.privstrlen,
+ tok->len, err);
+ if (err)
+ return (-1);
+ SET_PTR((char *)buf, len, tok->tt.privset.privstr,
+ tok->tt.privset.privstrlen, tok->len, err);
+ if (err)
+ return (-1);
+ return (0);
+}
+
+static void
+print_privset_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags)
+{
+
+ print_tok_type(fp, tok->id, "privilege", oflags);
+ if (oflags & AU_OFLAG_XML) {
+ open_attr(fp, "type");
+ print_string(fp, tok->tt.privset.privtstr,
+ tok->tt.privset.privtstrlen);
+ close_attr(fp);
+ open_attr(fp, "priv");
+ print_string(fp, tok->tt.privset.privstr,
+ tok->tt.privset.privstrlen);
+ close_attr(fp);
+ } else {
+ print_delim(fp, del);
+ print_string(fp, tok->tt.privset.privtstr,
+ tok->tt.privset.privtstrlen);
+ print_delim(fp, del);
+ print_string(fp, tok->tt.privset.privstr,
+ tok->tt.privset.privstrlen);
+ }
+}
+
+/*
+ * audit ID 4 bytes
+ * euid 4 bytes
+ * egid 4 bytes
+ * ruid 4 bytes
+ * rgid 4 bytes
+ * pid 4 bytes
+ * sessid 4 bytes
+ * terminal ID
+ * portid 4 bytes/8 bytes (32-bit/64-bit value)
+ * machine id 4 bytes
+ */
+static int
+fetch_subject64_tok(tokenstr_t *tok, u_char *buf, int len)
+{
+ int err = 0;
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.subj64.auid, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.subj64.euid, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.subj64.egid, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.subj64.ruid, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.subj64.rgid, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.subj64.pid, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.subj64.sid, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT64(buf, len, tok->tt.subj64.tid.port, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_BYTES(buf, len, &tok->tt.subj64.tid.addr,
+ sizeof(tok->tt.subj64.tid.addr), tok->len, err);
+ if (err)
+ return (-1);
+
+ return (0);
+}
+
+static void
+print_subject64_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags)
+{
+
+ print_tok_type(fp, tok->id, "subject", oflags);
+ if (oflags & AU_OFLAG_XML) {
+ open_attr(fp, "audit-uid");
+ print_user(fp, tok->tt.subj64.auid, oflags);
+ close_attr(fp);
+ open_attr(fp, "uid");
+ print_user(fp, tok->tt.subj64.euid, oflags);
+ close_attr(fp);
+ open_attr(fp, "gid");
+ print_group(fp, tok->tt.subj64.egid, oflags);
+ close_attr(fp);
+ open_attr(fp, "ruid");
+ print_user(fp, tok->tt.subj64.ruid, oflags);
+ close_attr(fp);
+ open_attr(fp, "rgid");
+ print_group(fp, tok->tt.subj64.rgid, oflags);
+ close_attr(fp);
+ open_attr(fp, "pid");
+ print_4_bytes(fp, tok->tt.subj64.pid, "%u");
+ close_attr(fp);
+ open_attr(fp, "sid");
+ print_4_bytes(fp, tok->tt.subj64.sid, "%u");
+ close_attr(fp);
+ open_attr(fp, "tid");
+ print_8_bytes(fp, tok->tt.subj64.tid.port, "%llu");
+ print_ip_address(fp, tok->tt.subj64.tid.addr);
+ close_attr(fp);
+ close_tag(fp, tok->id);
+ } else {
+ print_delim(fp, del);
+ print_user(fp, tok->tt.subj64.auid, oflags);
+ print_delim(fp, del);
+ print_user(fp, tok->tt.subj64.euid, oflags);
+ print_delim(fp, del);
+ print_group(fp, tok->tt.subj64.egid, oflags);
+ print_delim(fp, del);
+ print_user(fp, tok->tt.subj64.ruid, oflags);
+ print_delim(fp, del);
+ print_group(fp, tok->tt.subj64.rgid, oflags);
+ print_delim(fp, del);
+ print_4_bytes(fp, tok->tt.subj64.pid, "%u");
+ print_delim(fp, del);
+ print_4_bytes(fp, tok->tt.subj64.sid, "%u");
+ print_delim(fp, del);
+ print_8_bytes(fp, tok->tt.subj64.tid.port, "%llu");
+ print_delim(fp, del);
+ print_ip_address(fp, tok->tt.subj64.tid.addr);
+ }
+}
+
+/*
+ * audit ID 4 bytes
+ * euid 4 bytes
+ * egid 4 bytes
+ * ruid 4 bytes
+ * rgid 4 bytes
+ * pid 4 bytes
+ * sessid 4 bytes
+ * terminal ID
+ * portid 4 bytes
+ * type 4 bytes
+ * machine id 16 bytes
+ */
+static int
+fetch_subject32ex_tok(tokenstr_t *tok, u_char *buf, int len)
+{
+ int err = 0;
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.subj32_ex.auid, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.subj32_ex.euid, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.subj32_ex.egid, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.subj32_ex.ruid, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.subj32_ex.rgid, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.subj32_ex.pid, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.subj32_ex.sid, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.subj32_ex.tid.port, tok->len,
+ err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.subj32_ex.tid.type, tok->len,
+ err);
+ if (err)
+ return (-1);
+
+ if (tok->tt.subj32_ex.tid.type == AU_IPv4) {
+ READ_TOKEN_BYTES(buf, len, &tok->tt.subj32_ex.tid.addr[0],
+ sizeof(tok->tt.subj32_ex.tid.addr[0]), tok->len, err);
+ if (err)
+ return (-1);
+ } else if (tok->tt.subj32_ex.tid.type == AU_IPv6) {
+ READ_TOKEN_BYTES(buf, len, tok->tt.subj32_ex.tid.addr,
+ sizeof(tok->tt.subj32_ex.tid.addr), tok->len, err);
+ if (err)
+ return (-1);
+ } else
+ return (-1);
+
+ return (0);
+}
+
+static void
+print_subject32ex_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags)
+{
+
+ print_tok_type(fp, tok->id, "subject_ex", oflags);
+ if (oflags & AU_OFLAG_XML) {
+ open_attr(fp, "audit-uid");
+ print_user(fp, tok->tt.subj32_ex.auid, oflags);
+ close_attr(fp);
+ open_attr(fp, "uid");
+ print_user(fp, tok->tt.subj32_ex.euid, oflags);
+ close_attr(fp);
+ open_attr(fp, "gid");
+ print_group(fp, tok->tt.subj32_ex.egid, oflags);
+ close_attr(fp);
+ open_attr(fp, "ruid");
+ print_user(fp, tok->tt.subj32_ex.ruid, oflags);
+ close_attr(fp);
+ open_attr(fp, "rgid");
+ print_group(fp, tok->tt.subj32_ex.rgid, oflags);
+ close_attr(fp);
+ open_attr(fp, "pid");
+ print_4_bytes(fp, tok->tt.subj32_ex.pid, "%u");
+ close_attr(fp);
+ open_attr(fp, "sid");
+ print_4_bytes(fp, tok->tt.subj32_ex.sid, "%u");
+ close_attr(fp);
+ open_attr(fp, "tid");
+ print_4_bytes(fp, tok->tt.subj32_ex.tid.port, "%u");
+ print_ip_ex_address(fp, tok->tt.subj32_ex.tid.type,
+ tok->tt.subj32_ex.tid.addr);
+ close_attr(fp);
+ close_tag(fp, tok->id);
+ } else {
+ print_delim(fp, del);
+ print_user(fp, tok->tt.subj32_ex.auid, oflags);
+ print_delim(fp, del);
+ print_user(fp, tok->tt.subj32_ex.euid, oflags);
+ print_delim(fp, del);
+ print_group(fp, tok->tt.subj32_ex.egid, oflags);
+ print_delim(fp, del);
+ print_user(fp, tok->tt.subj32_ex.ruid, oflags);
+ print_delim(fp, del);
+ print_group(fp, tok->tt.subj32_ex.rgid, oflags);
+ print_delim(fp, del);
+ print_4_bytes(fp, tok->tt.subj32_ex.pid, "%u");
+ print_delim(fp, del);
+ print_4_bytes(fp, tok->tt.subj32_ex.sid, "%u");
+ print_delim(fp, del);
+ print_4_bytes(fp, tok->tt.subj32_ex.tid.port, "%u");
+ print_delim(fp, del);
+ print_ip_ex_address(fp, tok->tt.subj32_ex.tid.type,
+ tok->tt.subj32_ex.tid.addr);
+ }
+}
+
+/*
+ * audit ID 4 bytes
+ * euid 4 bytes
+ * egid 4 bytes
+ * ruid 4 bytes
+ * rgid 4 bytes
+ * pid 4 bytes
+ * sessid 4 bytes
+ * terminal ID
+ * portid 8 bytes
+ * type 4 bytes
+ * machine id 16 bytes
+ */
+static int
+fetch_subject64ex_tok(tokenstr_t *tok, u_char *buf, int len)
+{
+ int err = 0;
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.subj64_ex.auid, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.subj64_ex.euid, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.subj64_ex.egid, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.subj64_ex.ruid, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.subj64_ex.rgid, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.subj64_ex.pid, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.subj64_ex.sid, tok->len, err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT64(buf, len, tok->tt.subj64_ex.tid.port, tok->len,
+ err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT32(buf, len, tok->tt.subj64_ex.tid.type, tok->len,
+ err);
+ if (err)
+ return (-1);
+
+ if (tok->tt.subj64_ex.tid.type == AU_IPv4) {
+ READ_TOKEN_BYTES(buf, len, &tok->tt.subj64_ex.tid.addr[0],
+ sizeof(tok->tt.subj64_ex.tid.addr[0]), tok->len, err);
+ if (err)
+ return (-1);
+ } else if (tok->tt.subj64_ex.tid.type == AU_IPv6) {
+ READ_TOKEN_BYTES(buf, len, tok->tt.subj64_ex.tid.addr,
+ sizeof(tok->tt.subj64_ex.tid.addr), tok->len, err);
+ if (err)
+ return (-1);
+ } else
+ return (-1);
+
+ return (0);
+}
+
+static void
+print_subject64ex_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags)
+{
+ print_tok_type(fp, tok->id, "subject_ex", oflags);
+ if (oflags & AU_OFLAG_XML) {
+ open_attr(fp, "audit-uid");
+ print_user(fp, tok->tt.subj64_ex.auid, oflags);
+ close_attr(fp);
+ open_attr(fp, "uid");
+ print_user(fp, tok->tt.subj64_ex.euid, oflags);
+ close_attr(fp);
+ open_attr(fp, "gid");
+ print_group(fp, tok->tt.subj64_ex.egid, oflags);
+ close_attr(fp);
+ open_attr(fp, "ruid");
+ print_user(fp, tok->tt.subj64_ex.ruid, oflags);
+ close_attr(fp);
+ open_attr(fp, "rgid");
+ print_group(fp, tok->tt.subj64_ex.rgid, oflags);
+ close_attr(fp);
+ open_attr(fp, "pid");
+ print_4_bytes(fp, tok->tt.subj64_ex.pid, "%u");
+ close_attr(fp);
+ open_attr(fp, "sid");
+ print_4_bytes(fp, tok->tt.subj64_ex.sid, "%u");
+ close_attr(fp);
+ open_attr(fp, "tid");
+ print_8_bytes(fp, tok->tt.subj64_ex.tid.port, "%llu");
+ print_ip_ex_address(fp, tok->tt.subj64_ex.tid.type,
+ tok->tt.subj64_ex.tid.addr);
+ close_attr(fp);
+ close_tag(fp, tok->id);
+ } else {
+ print_delim(fp, del);
+ print_user(fp, tok->tt.subj64_ex.auid, oflags);
+ print_delim(fp, del);
+ print_user(fp, tok->tt.subj64_ex.euid, oflags);
+ print_delim(fp, del);
+ print_group(fp, tok->tt.subj64_ex.egid, oflags);
+ print_delim(fp, del);
+ print_user(fp, tok->tt.subj64_ex.ruid, oflags);
+ print_delim(fp, del);
+ print_group(fp, tok->tt.subj64_ex.rgid, oflags);
+ print_delim(fp, del);
+ print_4_bytes(fp, tok->tt.subj64_ex.pid, "%u");
+ print_delim(fp, del);
+ print_4_bytes(fp, tok->tt.subj64_ex.sid, "%u");
+ print_delim(fp, del);
+ print_8_bytes(fp, tok->tt.subj64_ex.tid.port, "%llu");
+ print_delim(fp, del);
+ print_ip_ex_address(fp, tok->tt.subj64_ex.tid.type,
+ tok->tt.subj64_ex.tid.addr);
+ }
+}
+
+/*
+ * size 2 bytes
+ * data size bytes
+ */
+static int
+fetch_text_tok(tokenstr_t *tok, u_char *buf, int len)
+{
+ int err = 0;
+
+ READ_TOKEN_U_INT16(buf, len, tok->tt.text.len, tok->len, err);
+ if (err)
+ return (-1);
+
+ SET_PTR((char*)buf, len, tok->tt.text.text, tok->tt.text.len, tok->len,
+ err);
+ if (err)
+ return (-1);
+
+ return (0);
+}
+
+static void
+print_text_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags)
+{
+
+ print_tok_type(fp, tok->id, "text", oflags);
+ if (oflags & AU_OFLAG_XML) {
+ print_string(fp, tok->tt.text.text, tok->tt.text.len);
+ close_tag(fp, tok->id);
+ } else {
+ print_delim(fp, del);
+ print_string(fp, tok->tt.text.text, tok->tt.text.len);
+ }
+}
+
+/*
+ * socket domain 2 bytes
+ * socket type 2 bytes
+ * address type 2 bytes
+ * local port 2 bytes
+ * local Internet address 4/16 bytes
+ * remote port 2 bytes
+ * remote Internet address 4/16 bytes
+ */
+static int
+fetch_socketex32_tok(tokenstr_t *tok, u_char *buf, int len)
+{
+ int err = 0;
+
+ READ_TOKEN_U_INT16(buf, len, tok->tt.socket_ex32.domain, tok->len,
+ err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT16(buf, len, tok->tt.socket_ex32.type, tok->len,
+ err);
+ if (err)
+ return (-1);
+
+ READ_TOKEN_U_INT16(buf, len, tok->tt.socket_ex32.atype, tok->len,
+ err);
+ if (err)
+ return (-1);
+
+ if (tok->tt.socket_ex32.atype != AU_IPv4 &&
+ tok->tt.socket_ex32.atype != AU_IPv6)
+ return (-1);
+
+ READ_TOKEN_BYTES(buf, len, &tok->tt.socket_ex32.l_port,
+ sizeof(uint16_t), tok->len, err);
+ if (err)
+ return (-1);
+
+ if (tok->tt.socket_ex32.atype == AU_IPv4) {
+ READ_TOKEN_BYTES(buf, len, &tok->tt.socket_ex32.l_addr,
+ sizeof(tok->tt.socket_ex32.l_addr[0]), tok->len, err);
+ if (err)
+ return (-1);
+ } else {
+ READ_TOKEN_BYTES(buf, len, &tok->tt.socket_ex32.l_addr,
+ sizeof(tok->tt.socket_ex32.l_addr), tok->len, err);
+ if (err)
+ return (-1);
+ }
+
+ READ_TOKEN_BYTES(buf, len, &tok->tt.socket_ex32.r_port,
+ sizeof(uint16_t), tok->len, err);
+ if (err)
+ return (-1);
+
+ if (tok->tt.socket_ex32.atype == AU_IPv4) {
+ READ_TOKEN_BYTES(buf, len, &tok->tt.socket_ex32.r_addr,
+ sizeof(tok->tt.socket_ex32.r_addr[0]), tok->len, err);
+ if (err)
+ return (-1);
+ } else {
+ READ_TOKEN_BYTES(buf, len, &tok->tt.socket_ex32.r_addr,
+ sizeof(tok->tt.socket_ex32.r_addr), tok->len, err);
+ if (err)
+ return (-1);
+ }
+
+ return (0);
+}
+
+static void
+print_socketex32_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags)
+{
+
+ /*
+ * This print routine prints BSM constant space domains and socket
+ * types rather than converting them. If we add string printers for
+ * these constants in the future, we may want to call conversion
+ * routines.
+ */
+ print_tok_type(fp, tok->id, "socket", oflags);
+ if (oflags & AU_OFLAG_XML) {
+ open_attr(fp, "sock_dom");
+ print_2_bytes(fp, tok->tt.socket_ex32.domain, "%#x");
+ close_attr(fp);
+ open_attr(fp, "sock_type");
+ print_2_bytes(fp, tok->tt.socket_ex32.type, "%#x");
+ close_attr(fp);
+ open_attr(fp, "lport");
+ print_2_bytes(fp, ntohs(tok->tt.socket_ex32.l_port), "%#x");
+ close_attr(fp);
+ open_attr(fp, "laddr");
+ print_ip_ex_address(fp, tok->tt.socket_ex32.atype,
+ tok->tt.socket_ex32.l_addr);
+ close_attr(fp);
+ open_attr(fp, "faddr");
+ print_ip_ex_address(fp, tok->tt.socket_ex32.atype,
+ tok->tt.socket_ex32.r_addr);
+ close_attr(fp);
+ open_attr(fp, "fport");
+ print_2_bytes(fp, ntohs(tok->tt.socket_ex32.r_port), "%#x");
+ close_attr(fp);
+ close_tag(fp, tok->id);
+ } else {
+ print_delim(fp, del);
+ print_2_bytes(fp, tok->tt.socket_ex32.domain, "%#x");
+ print_delim(fp, del);
+ print_2_bytes(fp, tok->tt.socket_ex32.type, "%#x");
+ print_delim(fp, del);
+ print_2_bytes(fp, ntohs(tok->tt.socket_ex32.l_port), "%#x");
+ print_delim(fp, del);
+ print_ip_ex_address(fp, tok->tt.socket_ex32.atype,
+ tok->tt.socket_ex32.l_addr);
+ print_delim(fp, del);
+ print_4_bytes(fp, ntohs(tok->tt.socket_ex32.r_port), "%#x");
+ print_delim(fp, del);
+ print_ip_ex_address(fp, tok->tt.socket_ex32.atype,
+ tok->tt.socket_ex32.r_addr);
+ }
+}
+
+static int
+fetch_invalid_tok(tokenstr_t *tok, u_char *buf, int len)
+{
+ int err = 0;
+ int recoversize;
+
+ recoversize = len - (tok->len + AUDIT_TRAILER_SIZE);
+ if (recoversize <= 0)
+ return (-1);
+
+ tok->tt.invalid.length = recoversize;
+
+ SET_PTR((char*)buf, len, tok->tt.invalid.data, recoversize, tok->len,
+ err);
+ if (err)
+ return (-1);
+
+ return (0);
+}
+
+static void
+print_invalid_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags)
+{
+
+ if (!(oflags & AU_OFLAG_XML)) {
+ print_tok_type(fp, tok->id, "unknown", oflags);
+ print_delim(fp, del);
+ print_mem(fp, (u_char*)tok->tt.invalid.data,
+ tok->tt.invalid.length);
+ }
+}
+
+
+/*
+ * size 2 bytes;
+ * zonename size bytes;
+ */
+static int
+fetch_zonename_tok(tokenstr_t *tok, u_char *buf, int len)
+{
+ int err = 0;
+
+ READ_TOKEN_U_INT16(buf, len, tok->tt.zonename.len, tok->len, err);
+ if (err)
+ return (-1);
+ SET_PTR((char *)buf, len, tok->tt.zonename.zonename, tok->tt.zonename.len,
+ tok->len, err);
+ if (err)
+ return (-1);
+ return (0);
+}
+
+static void
+print_zonename_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags)
+{
+
+ print_tok_type(fp, tok->id, "zone", oflags);
+ if (oflags & AU_OFLAG_XML) {
+ open_attr(fp, "name");
+ print_string(fp, tok->tt.zonename.zonename,
+ tok->tt.zonename.len);
+ close_attr(fp);
+ close_tag(fp, tok->id);
+ } else {
+ print_delim(fp, del);
+ print_string(fp, tok->tt.zonename.zonename,
+ tok->tt.zonename.len);
+ }
+}
+
+/*
+ * Reads the token beginning at buf into tok.
+ */
+int
+au_fetch_tok(tokenstr_t *tok, u_char *buf, int len)
+{
+
+ if (len <= 0)
+ return (-1);
+
+ tok->len = 1;
+ tok->data = buf;
+ tok->id = *buf;
+
+ switch(tok->id) {
+ case AUT_HEADER32:
+ return (fetch_header32_tok(tok, buf, len));
+
+ case AUT_HEADER32_EX:
+ return (fetch_header32_ex_tok(tok, buf, len));
+
+ case AUT_HEADER64:
+ return (fetch_header64_tok(tok, buf, len));
+
+ case AUT_HEADER64_EX:
+ return (fetch_header64_ex_tok(tok, buf, len));
+
+ case AUT_TRAILER:
+ return (fetch_trailer_tok(tok, buf, len));
+
+ case AUT_ARG32:
+ return (fetch_arg32_tok(tok, buf, len));
+
+ case AUT_ARG64:
+ return (fetch_arg64_tok(tok, buf, len));
+
+ case AUT_ATTR32:
+ return (fetch_attr32_tok(tok, buf, len));
+
+ case AUT_ATTR64:
+ return (fetch_attr64_tok(tok, buf, len));
+
+ case AUT_EXIT:
+ return (fetch_exit_tok(tok, buf, len));
+
+ case AUT_EXEC_ARGS:
+ return (fetch_execarg_tok(tok, buf, len));
+
+ case AUT_EXEC_ENV:
+ return (fetch_execenv_tok(tok, buf, len));
+
+ case AUT_OTHER_FILE32:
+ return (fetch_file_tok(tok, buf, len));
+
+ case AUT_NEWGROUPS:
+ return (fetch_newgroups_tok(tok, buf, len));
+
+ case AUT_IN_ADDR:
+ return (fetch_inaddr_tok(tok, buf, len));
+
+ case AUT_IN_ADDR_EX:
+ return (fetch_inaddr_ex_tok(tok, buf, len));
+
+ case AUT_IP:
+ return (fetch_ip_tok(tok, buf, len));
+
+ case AUT_IPC:
+ return (fetch_ipc_tok(tok, buf, len));
+
+ case AUT_IPC_PERM:
+ return (fetch_ipcperm_tok(tok, buf, len));
+
+ case AUT_IPORT:
+ return (fetch_iport_tok(tok, buf, len));
+
+ case AUT_OPAQUE:
+ return (fetch_opaque_tok(tok, buf, len));
+
+ case AUT_PATH:
+ return (fetch_path_tok(tok, buf, len));
+
+ case AUT_PROCESS32:
+ return (fetch_process32_tok(tok, buf, len));
+
+ case AUT_PROCESS32_EX:
+ return (fetch_process32ex_tok(tok, buf, len));
+
+ case AUT_PROCESS64:
+ return (fetch_process64_tok(tok, buf, len));
+
+ case AUT_PROCESS64_EX:
+ return (fetch_process64ex_tok(tok, buf, len));
+
+ case AUT_RETURN32:
+ return (fetch_return32_tok(tok, buf, len));
+
+ case AUT_RETURN64:
+ return (fetch_return64_tok(tok, buf, len));
+
+ case AUT_SEQ:
+ return (fetch_seq_tok(tok, buf, len));
+
+ case AUT_SOCKET:
+ return (fetch_socket_tok(tok, buf, len));
+
+ case AUT_SOCKINET32:
+ return (fetch_sock_inet32_tok(tok, buf, len));
+
+ case AUT_SOCKUNIX:
+ return (fetch_sock_unix_tok(tok, buf, len));
+
+ case AUT_SOCKINET128:
+ return (fetch_sock_inet128_tok(tok, buf, len));
+
+ case AUT_SUBJECT32:
+ return (fetch_subject32_tok(tok, buf, len));
+
+ case AUT_SUBJECT32_EX:
+ return (fetch_subject32ex_tok(tok, buf, len));
+
+ case AUT_SUBJECT64:
+ return (fetch_subject64_tok(tok, buf, len));
+
+ case AUT_SUBJECT64_EX:
+ return (fetch_subject64ex_tok(tok, buf, len));
+
+ case AUT_TEXT:
+ return (fetch_text_tok(tok, buf, len));
+
+ case AUT_SOCKET_EX:
+ return (fetch_socketex32_tok(tok, buf, len));
+
+ case AUT_DATA:
+ return (fetch_arb_tok(tok, buf, len));
+
+ case AUT_ZONENAME:
+ return (fetch_zonename_tok(tok, buf, len));
+
+ case AUT_UPRIV:
+ return (fetch_priv_tok(tok, buf, len));
+
+ case AUT_PRIV:
+ return (fetch_privset_tok(tok, buf, len));
+
+ default:
+ return (fetch_invalid_tok(tok, buf, len));
+ }
+}
+
+void
+au_print_flags_tok(FILE *outfp, tokenstr_t *tok, char *del, int oflags)
+{
+
+ switch(tok->id) {
+ case AUT_HEADER32:
+ print_header32_tok(outfp, tok, del, oflags);
+ return;
+
+ case AUT_HEADER32_EX:
+ print_header32_ex_tok(outfp, tok, del, oflags);
+ return;
+
+ case AUT_HEADER64:
+ print_header64_tok(outfp, tok, del, oflags);
+ return;
+
+ case AUT_HEADER64_EX:
+ print_header64_ex_tok(outfp, tok, del, oflags);
+ return;
+
+ case AUT_TRAILER:
+ print_trailer_tok(outfp, tok, del, oflags);
+ return;
+
+ case AUT_ARG32:
+ print_arg32_tok(outfp, tok, del, oflags);
+ return;
+
+ case AUT_ARG64:
+ print_arg64_tok(outfp, tok, del, oflags);
+ return;
+
+ case AUT_DATA:
+ print_arb_tok(outfp, tok, del, oflags);
+ return;
+
+ case AUT_ATTR32:
+ print_attr32_tok(outfp, tok, del, oflags);
+ return;
+
+ case AUT_ATTR64:
+ print_attr64_tok(outfp, tok, del, oflags);
+ return;
+
+ case AUT_EXIT:
+ print_exit_tok(outfp, tok, del, oflags);
+ return;
+
+ case AUT_EXEC_ARGS:
+ print_execarg_tok(outfp, tok, del, oflags);
+ return;
+
+ case AUT_EXEC_ENV:
+ print_execenv_tok(outfp, tok, del, oflags);
+ return;
+
+ case AUT_OTHER_FILE32:
+ print_file_tok(outfp, tok, del, oflags);
+ return;
+
+ case AUT_NEWGROUPS:
+ print_newgroups_tok(outfp, tok, del, oflags);
+ return;
+
+ case AUT_IN_ADDR:
+ print_inaddr_tok(outfp, tok, del, oflags);
+ return;
+
+ case AUT_IN_ADDR_EX:
+ print_inaddr_ex_tok(outfp, tok, del, oflags);
+ return;
+
+ case AUT_IP:
+ print_ip_tok(outfp, tok, del, oflags);
+ return;
+
+ case AUT_IPC:
+ print_ipc_tok(outfp, tok, del, oflags);
+ return;
+
+ case AUT_IPC_PERM:
+ print_ipcperm_tok(outfp, tok, del, oflags);
+ return;
+
+ case AUT_IPORT:
+ print_iport_tok(outfp, tok, del, oflags);
+ return;
+
+ case AUT_OPAQUE:
+ print_opaque_tok(outfp, tok, del, oflags);
+ return;
+
+ case AUT_PATH:
+ print_path_tok(outfp, tok, del, oflags);
+ return;
+
+ case AUT_PROCESS32:
+ print_process32_tok(outfp, tok, del, oflags);
+ return;
+
+ case AUT_PROCESS32_EX:
+ print_process32ex_tok(outfp, tok, del, oflags);
+ return;
+
+ case AUT_PROCESS64:
+ print_process64_tok(outfp, tok, del, oflags);
+ return;
+
+ case AUT_PROCESS64_EX:
+ print_process64ex_tok(outfp, tok, del, oflags);
+ return;
+
+ case AUT_RETURN32:
+ print_return32_tok(outfp, tok, del, oflags);
+ return;
+
+ case AUT_RETURN64:
+ print_return64_tok(outfp, tok, del, oflags);
+ return;
+
+ case AUT_SEQ:
+ print_seq_tok(outfp, tok, del, oflags);
+ return;
+
+ case AUT_SOCKET:
+ print_socket_tok(outfp, tok, del, oflags);
+ return;
+
+ case AUT_SOCKINET32:
+ print_sock_inet32_tok(outfp, tok, del, oflags);
+ return;
+
+ case AUT_SOCKUNIX:
+ print_sock_unix_tok(outfp, tok, del, oflags);
+ return;
+
+ case AUT_SOCKINET128:
+ print_sock_inet128_tok(outfp, tok, del, oflags);
+ return;
+
+ case AUT_SUBJECT32:
+ print_subject32_tok(outfp, tok, del, oflags);
+ return;
+
+ case AUT_SUBJECT64:
+ print_subject64_tok(outfp, tok, del, oflags);
+ return;
+
+ case AUT_SUBJECT32_EX:
+ print_subject32ex_tok(outfp, tok, del, oflags);
+ return;
+
+ case AUT_SUBJECT64_EX:
+ print_subject64ex_tok(outfp, tok, del, oflags);
+ return;
+
+ case AUT_TEXT:
+ print_text_tok(outfp, tok, del, oflags);
+ return;
+
+ case AUT_SOCKET_EX:
+ print_socketex32_tok(outfp, tok, del, oflags);
+ return;
+
+ case AUT_ZONENAME:
+ print_zonename_tok(outfp, tok, del, oflags);
+ return;
+
+ case AUT_UPRIV:
+ print_upriv_tok(outfp, tok, del, oflags);
+ return;
+
+ case AUT_PRIV:
+ print_privset_tok(outfp, tok, del, oflags);
+ return;
+
+ default:
+ print_invalid_tok(outfp, tok, del, oflags);
+ }
+}
+
+/*
+ * 'prints' the token out to outfp.
+ */
+void
+au_print_tok(FILE *outfp, tokenstr_t *tok, char *del, char raw, char sfrm)
+{
+ int oflags = AU_OFLAG_NONE;
+
+ if (raw)
+ oflags |= AU_OFLAG_RAW;
+ if (sfrm)
+ oflags |= AU_OFLAG_SHORT;
+
+ au_print_flags_tok(outfp, tok, del, oflags);
+}
+
+/*
+ * 'prints' the token out to outfp in XML format.
+ */
+void
+au_print_tok_xml(FILE *outfp, tokenstr_t *tok, char *del, char raw,
+ char sfrm)
+{
+ int oflags = AU_OFLAG_XML;
+
+ if (raw)
+ oflags |= AU_OFLAG_RAW;
+ if (sfrm)
+ oflags |= AU_OFLAG_SHORT;
+
+ au_print_flags_tok(outfp, tok, del, oflags);
+}
+
+/*
+ * Read a record from the file pointer, store data in buf memory for buf is
+ * also allocated in this function and has to be free'd outside this call.
+ *
+ * au_read_rec() handles two possibilities: a stand-alone file token, or a
+ * complete audit record.
+ *
+ * XXXRW: Note that if we hit an error, we leave the stream in an unusable
+ * state, because it will be partly offset into a record. We should rewind
+ * or do something more intelligent. Particularly interesting is the case
+ * where we perform a partial read of a record from a non-blockable file
+ * descriptor. We should return the partial read and continue...?
+ */
+int
+au_read_rec(FILE *fp, u_char **buf)
+{
+ u_char *bptr;
+ u_int32_t recsize;
+ u_int32_t bytestoread;
+ u_char type;
+
+ u_int32_t sec, msec;
+ u_int16_t filenamelen;
+
+ type = fgetc(fp);
+
+ switch (type) {
+ case AUT_HEADER32:
+ case AUT_HEADER32_EX:
+ case AUT_HEADER64:
+ case AUT_HEADER64_EX:
+ /* read the record size from the token */
+ if (fread(&recsize, 1, sizeof(u_int32_t), fp) <
+ sizeof(u_int32_t)) {
+ errno = EINVAL;
+ return (-1);
+ }
+ recsize = be32toh(recsize);
+
+ /* Check for recsize sanity */
+ if (recsize < (sizeof(u_int32_t) + sizeof(u_char))) {
+ errno = EINVAL;
+ return (-1);
+ }
+
+ *buf = calloc(recsize, sizeof(u_char));
+ if (*buf == NULL)
+ return (-1);
+ bptr = *buf;
+
+ /* store the token contents already read, back to the buffer*/
+ *bptr = type;
+ bptr++;
+ be32enc(bptr, recsize);
+ bptr += sizeof(u_int32_t);
+
+ /* now read remaining record bytes */
+ bytestoread = recsize - (sizeof(u_int32_t) + sizeof(u_char));
+
+ if (fread(bptr, 1, bytestoread, fp) < bytestoread) {
+ free(*buf);
+ errno = EINVAL;
+ return (-1);
+ }
+ break;
+
+ case AUT_OTHER_FILE32:
+ /*
+ * The file token is variable-length, as it includes a
+ * pathname. As a result, we have to read incrementally
+ * until we know the total length, then allocate space and
+ * read the rest.
+ */
+ if (fread(&sec, 1, sizeof(sec), fp) < sizeof(sec)) {
+ errno = EINVAL;
+ return (-1);
+ }
+ if (fread(&msec, 1, sizeof(msec), fp) < sizeof(msec)) {
+ errno = EINVAL;
+ return (-1);
+ }
+ if (fread(&filenamelen, 1, sizeof(filenamelen), fp) <
+ sizeof(filenamelen)) {
+ errno = EINVAL;
+ return (-1);
+ }
+ recsize = sizeof(type) + sizeof(sec) + sizeof(msec) +
+ sizeof(filenamelen) + ntohs(filenamelen);
+ *buf = malloc(recsize);
+ if (*buf == NULL)
+ return (-1);
+ bptr = *buf;
+
+ bcopy(&type, bptr, sizeof(type));
+ bptr += sizeof(type);
+ bcopy(&sec, bptr, sizeof(sec));
+ bptr += sizeof(sec);
+ bcopy(&msec, bptr, sizeof(msec));
+ bptr += sizeof(msec);
+ bcopy(&filenamelen, bptr, sizeof(filenamelen));
+ bptr += sizeof(filenamelen);
+
+ if (fread(bptr, 1, ntohs(filenamelen), fp) <
+ ntohs(filenamelen)) {
+ free(buf);
+ errno = EINVAL;
+ return (-1);
+ }
+ break;
+
+ default:
+ errno = EINVAL;
+ return (-1);
+ }
+
+ return (recsize);
+}
Deleted: vendor/openbsm/1.2_alpha4/libbsm/bsm_mask.c
===================================================================
--- vendor/openbsm/dist/libbsm/bsm_mask.c 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/libbsm/bsm_mask.c 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,200 +0,0 @@
-/*
- * Copyright (c) 2004 Apple Computer, Inc.
- * Copyright (c) 2005 Robert N. M. Watson
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. Neither the name of Apple Computer, Inc. ("Apple") nor the names of
- * its contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR
- * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
- * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- * $P4: //depot/projects/trustedbsd/openbsm/libbsm/bsm_mask.c#13 $
- */
-
-#include <sys/types.h>
-
-#include <config/config.h>
-#ifdef HAVE_FULL_QUEUE_H
-#include <sys/queue.h>
-#else /* !HAVE_FULL_QUEUE_H */
-#include <compat/queue.h>
-#endif /* !HAVE_FULL_QUEUE_H */
-
-#include <bsm/libbsm.h>
-
-#include <pthread.h>
-#include <stdlib.h>
-#include <string.h>
-
-/* MT-Safe */
-static pthread_mutex_t mutex = PTHREAD_MUTEX_INITIALIZER;
-static int firsttime = 1;
-
-/*
- * XXX ev_cache, once created, sticks around until the calling program exits.
- * This may or may not be a problem as far as absolute memory usage goes, but
- * at least there don't appear to be any leaks in using the cache.
- *
- * XXXRW: Note that despite (mutex), load_event_table() could race with
- * other consumers of the getauevents() API.
- */
-struct audit_event_map {
- char ev_name[AU_EVENT_NAME_MAX];
- char ev_desc[AU_EVENT_DESC_MAX];
- struct au_event_ent ev;
- LIST_ENTRY(audit_event_map) ev_list;
-};
-static LIST_HEAD(, audit_event_map) ev_cache;
-
-static struct audit_event_map *
-audit_event_map_alloc(void)
-{
- struct audit_event_map *aemp;
-
- aemp = malloc(sizeof(*aemp));
- if (aemp == NULL)
- return (aemp);
- bzero(aemp, sizeof(*aemp));
- aemp->ev.ae_name = aemp->ev_name;
- aemp->ev.ae_desc = aemp->ev_desc;
- return (aemp);
-}
-
-static void
-audit_event_map_free(struct audit_event_map *aemp)
-{
-
- free(aemp);
-}
-
-/*
- * When reading into the cache fails, we need to flush the entire cache to
- * prevent it from containing some but not all records.
- */
-static void
-flush_cache(void)
-{
- struct audit_event_map *aemp;
-
- /* XXX: Would assert 'mutex'. */
-
- while ((aemp = LIST_FIRST(&ev_cache)) != NULL) {
- LIST_REMOVE(aemp, ev_list);
- audit_event_map_free(aemp);
- }
-}
-
-static int
-load_event_table(void)
-{
- struct audit_event_map *aemp;
- struct au_event_ent *ep;
-
- /*
- * XXX: Would assert 'mutex'.
- * Loading of the cache happens only once; dont check if cache is
- * already loaded.
- */
- LIST_INIT(&ev_cache);
- setauevent(); /* Rewind to beginning of entries. */
- do {
- aemp = audit_event_map_alloc();
- if (aemp == NULL) {
- flush_cache();
- return (-1);
- }
- ep = getauevent_r(&aemp->ev);
- if (ep != NULL)
- LIST_INSERT_HEAD(&ev_cache, aemp, ev_list);
- else
- audit_event_map_free(aemp);
- } while (ep != NULL);
- return (1);
-}
-
-/*
- * Read the event with the matching event number from the cache.
- */
-static struct au_event_ent *
-read_from_cache(au_event_t event)
-{
- struct audit_event_map *elem;
-
- /* XXX: Would assert 'mutex'. */
-
- LIST_FOREACH(elem, &ev_cache, ev_list) {
- if (elem->ev.ae_number == event)
- return (&elem->ev);
- }
-
- return (NULL);
-}
-
-/*
- * Check if the audit event is preselected against the preselection mask.
- */
-int
-au_preselect(au_event_t event, au_mask_t *mask_p, int sorf, int flag)
-{
- struct au_event_ent *ev;
- au_class_t effmask = 0;
-
- if (mask_p == NULL)
- return (-1);
-
-
- pthread_mutex_lock(&mutex);
- if (firsttime) {
- firsttime = 0;
- if ( -1 == load_event_table()) {
- pthread_mutex_unlock(&mutex);
- return (-1);
- }
- }
- switch (flag) {
- case AU_PRS_REREAD:
- flush_cache();
- if (load_event_table() == -1) {
- pthread_mutex_unlock(&mutex);
- return (-1);
- }
- ev = read_from_cache(event);
- break;
- case AU_PRS_USECACHE:
- ev = read_from_cache(event);
- break;
- default:
- ev = NULL;
- }
- if (ev == NULL) {
- pthread_mutex_unlock(&mutex);
- return (-1);
- }
- if (sorf & AU_PRS_SUCCESS)
- effmask |= (mask_p->am_success & ev->ae_class);
- if (sorf & AU_PRS_FAILURE)
- effmask |= (mask_p->am_failure & ev->ae_class);
- pthread_mutex_unlock(&mutex);
- if (effmask != 0)
- return (1);
- return (0);
-}
Copied: vendor/openbsm/1.2_alpha4/libbsm/bsm_mask.c (from rev 11163, vendor/openbsm/dist/libbsm/bsm_mask.c)
===================================================================
--- vendor/openbsm/1.2_alpha4/libbsm/bsm_mask.c (rev 0)
+++ vendor/openbsm/1.2_alpha4/libbsm/bsm_mask.c 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,212 @@
+/*-
+ * Copyright (c) 2004 Apple Inc.
+ * Copyright (c) 2005 Robert N. M. Watson
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of Apple Inc. ("Apple") nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <sys/types.h>
+
+#include <config/config.h>
+#ifdef HAVE_FULL_QUEUE_H
+#include <sys/queue.h>
+#else /* !HAVE_FULL_QUEUE_H */
+#include <compat/queue.h>
+#endif /* !HAVE_FULL_QUEUE_H */
+
+#include <bsm/libbsm.h>
+
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+#include <pthread.h>
+#endif
+#include <stdlib.h>
+#include <string.h>
+
+/* MT-Safe */
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+static pthread_mutex_t mutex = PTHREAD_MUTEX_INITIALIZER;
+#endif
+static int firsttime = 1;
+
+/*
+ * XXX ev_cache, once created, sticks around until the calling program exits.
+ * This may or may not be a problem as far as absolute memory usage goes, but
+ * at least there don't appear to be any leaks in using the cache.
+ *
+ * XXXRW: Note that despite (mutex), load_event_table() could race with
+ * other consumers of the getauevents() API.
+ */
+struct audit_event_map {
+ char ev_name[AU_EVENT_NAME_MAX];
+ char ev_desc[AU_EVENT_DESC_MAX];
+ struct au_event_ent ev;
+ LIST_ENTRY(audit_event_map) ev_list;
+};
+static LIST_HEAD(, audit_event_map) ev_cache;
+
+static struct audit_event_map *
+audit_event_map_alloc(void)
+{
+ struct audit_event_map *aemp;
+
+ aemp = malloc(sizeof(*aemp));
+ if (aemp == NULL)
+ return (aemp);
+ bzero(aemp, sizeof(*aemp));
+ aemp->ev.ae_name = aemp->ev_name;
+ aemp->ev.ae_desc = aemp->ev_desc;
+ return (aemp);
+}
+
+static void
+audit_event_map_free(struct audit_event_map *aemp)
+{
+
+ free(aemp);
+}
+
+/*
+ * When reading into the cache fails, we need to flush the entire cache to
+ * prevent it from containing some but not all records.
+ */
+static void
+flush_cache(void)
+{
+ struct audit_event_map *aemp;
+
+ /* XXX: Would assert 'mutex'. */
+
+ while ((aemp = LIST_FIRST(&ev_cache)) != NULL) {
+ LIST_REMOVE(aemp, ev_list);
+ audit_event_map_free(aemp);
+ }
+}
+
+static int
+load_event_table(void)
+{
+ struct audit_event_map *aemp;
+ struct au_event_ent *ep;
+
+ /*
+ * XXX: Would assert 'mutex'.
+ * Loading of the cache happens only once; dont check if cache is
+ * already loaded.
+ */
+ LIST_INIT(&ev_cache);
+ setauevent(); /* Rewind to beginning of entries. */
+ do {
+ aemp = audit_event_map_alloc();
+ if (aemp == NULL) {
+ flush_cache();
+ return (-1);
+ }
+ ep = getauevent_r(&aemp->ev);
+ if (ep != NULL)
+ LIST_INSERT_HEAD(&ev_cache, aemp, ev_list);
+ else
+ audit_event_map_free(aemp);
+ } while (ep != NULL);
+ return (1);
+}
+
+/*
+ * Read the event with the matching event number from the cache.
+ */
+static struct au_event_ent *
+read_from_cache(au_event_t event)
+{
+ struct audit_event_map *elem;
+
+ /* XXX: Would assert 'mutex'. */
+
+ LIST_FOREACH(elem, &ev_cache, ev_list) {
+ if (elem->ev.ae_number == event)
+ return (&elem->ev);
+ }
+
+ return (NULL);
+}
+
+/*
+ * Check if the audit event is preselected against the preselection mask.
+ */
+int
+au_preselect(au_event_t event, au_mask_t *mask_p, int sorf, int flag)
+{
+ struct au_event_ent *ev;
+ au_class_t effmask = 0;
+
+ if (mask_p == NULL)
+ return (-1);
+
+
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+ pthread_mutex_lock(&mutex);
+#endif
+ if (firsttime) {
+ firsttime = 0;
+ if ( -1 == load_event_table()) {
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+ pthread_mutex_unlock(&mutex);
+#endif
+ return (-1);
+ }
+ }
+ switch (flag) {
+ case AU_PRS_REREAD:
+ flush_cache();
+ if (load_event_table() == -1) {
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+ pthread_mutex_unlock(&mutex);
+#endif
+ return (-1);
+ }
+ ev = read_from_cache(event);
+ break;
+ case AU_PRS_USECACHE:
+ ev = read_from_cache(event);
+ break;
+ default:
+ ev = NULL;
+ }
+ if (ev == NULL) {
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+ pthread_mutex_unlock(&mutex);
+#endif
+ return (-1);
+ }
+ if (sorf & AU_PRS_SUCCESS)
+ effmask |= (mask_p->am_success & ev->ae_class);
+ if (sorf & AU_PRS_FAILURE)
+ effmask |= (mask_p->am_failure & ev->ae_class);
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+ pthread_mutex_unlock(&mutex);
+#endif
+ if (effmask != 0)
+ return (1);
+ return (0);
+}
Deleted: vendor/openbsm/1.2_alpha4/libbsm/bsm_notify.c
===================================================================
--- vendor/openbsm/dist/libbsm/bsm_notify.c 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/libbsm/bsm_notify.c 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,181 +0,0 @@
-/*
- * Copyright (c) 2004 Apple Computer, Inc.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. Neither the name of Apple Computer, Inc. ("Apple") nor the names of
- * its contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR
- * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
- * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- * $P4: //depot/projects/trustedbsd/openbsm/libbsm/bsm_notify.c#13 $
- */
-
-/*
- * Based on sample code from Marc Majka.
- */
-#include <sys/types.h>
-
-#include <config/config.h>
-#ifdef HAVE_FULL_QUEUE_H
-#include <sys/queue.h>
-#else /* !HAVE_FULL_QUEUE_H */
-#include <compat/queue.h>
-#endif /* !HAVE_FULL_QUEUE_H */
-
-#include <bsm/audit_internal.h>
-#include <bsm/libbsm.h>
-
-#include <errno.h>
-#include <inttypes.h>
-#include <stdarg.h>
-#include <string.h>
-#include <syslog.h>
-
-
-#ifdef __APPLE__
-#include <notify.h>
-/* If 1, assumes a kernel that sends the right notification. */
-#define AUDIT_NOTIFICATION_ENABLED 1
-
-#if AUDIT_NOTIFICATION_ENABLED
-static int token = 0;
-#endif /* AUDIT_NOTIFICATION_ENABLED */
-
-static long au_cond = AUC_UNSET; /* <bsm/audit.h> */
-
-uint32_t
-au_notify_initialize(void)
-{
-#if AUDIT_NOTIFICATION_ENABLED
- uint32_t status;
- int ignore_first;
-
- status = notify_register_check(__BSM_INTERNAL_NOTIFY_KEY, &token);
- if (status != NOTIFY_STATUS_OK)
- return (status);
- status = notify_check(token, &ignore_first);
- if (status != NOTIFY_STATUS_OK)
- return (status);
-#endif
-
- if (auditon(A_GETCOND, &au_cond, sizeof(long)) < 0) {
- syslog(LOG_ERR, "Initial audit status check failed (%s)",
- strerror(errno));
- if (errno == ENOSYS) /* auditon() unimplemented. */
- return (AU_UNIMPL);
- return (NOTIFY_STATUS_FAILED); /* Is there a better code? */
- }
- return (NOTIFY_STATUS_OK);
-}
-
-int
-au_notify_terminate(void)
-{
-
-#if AUDIT_NOTIFICATION_ENABLED
- return ((notify_cancel(token) == NOTIFY_STATUS_OK) ? 0 : -1);
-#else
- return (0);
-#endif
-}
-
-/*
- * On error of any notify(3) call, reset 'au_cond' to ensure we re-run
- * au_notify_initialize() next time 'round--but assume auditing is on. This
- * is a slight performance hit if auditing is off, but at least the system
- * will behave correctly. The notification calls are unlikely to fail,
- * anyway.
- */
-int
-au_get_state(void)
-{
-#if AUDIT_NOTIFICATION_ENABLED
- int did_notify;
-#endif
- int status;
-
- /*
- * Don't make the client initialize this set of routines, but take the
- * slight performance hit by checking ourselves every time.
- */
- if (au_cond == AUC_UNSET) {
- status = au_notify_initialize();
- if (status != NOTIFY_STATUS_OK) {
- if (status == AU_UNIMPL)
- return (AU_UNIMPL);
- return (AUC_AUDITING);
- } else
- return (au_cond);
- }
-#if AUDIT_NOTIFICATION_ENABLED
- status = notify_check(token, &did_notify);
- if (status != NOTIFY_STATUS_OK) {
- au_cond = AUC_UNSET;
- return (AUC_AUDITING);
- }
-
- if (did_notify == 0)
- return (au_cond);
-#endif
-
- if (auditon(A_GETCOND, &au_cond, sizeof(long)) < 0) {
- /* XXX Reset au_cond to AUC_UNSET? */
- syslog(LOG_ERR, "Audit status check failed (%s)",
- strerror(errno));
- if (errno == ENOSYS) /* Function unimplemented. */
- return (AU_UNIMPL);
- return (errno);
- }
-
- switch (au_cond) {
- case AUC_NOAUDIT: /* Auditing suspended. */
- case AUC_DISABLED: /* Auditing shut off. */
- return (AUC_NOAUDIT);
-
- case AUC_UNSET: /* Uninitialized; shouldn't get here. */
- case AUC_AUDITING: /* Audit on. */
- default:
- return (AUC_AUDITING);
- }
-}
-#endif /* !__APPLE__ */
-
-int
-cannot_audit(int val __unused)
-{
-#ifdef __APPLE__
- return (!(au_get_state() == AUC_AUDITING));
-#else
- unsigned long au_cond;
-
- if (auditon(A_GETCOND, &au_cond, sizeof(long)) < 0) {
- if (errno != ENOSYS) {
- syslog(LOG_ERR, "Audit status check failed (%s)",
- strerror(errno));
- }
- return (1);
- }
- if (au_cond == AUC_NOAUDIT || au_cond == AUC_DISABLED)
- return (1);
- return (0);
-#endif /* !__APPLE__ */
-}
Copied: vendor/openbsm/1.2_alpha4/libbsm/bsm_notify.c (from rev 11163, vendor/openbsm/dist/libbsm/bsm_notify.c)
===================================================================
--- vendor/openbsm/1.2_alpha4/libbsm/bsm_notify.c (rev 0)
+++ vendor/openbsm/1.2_alpha4/libbsm/bsm_notify.c 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,179 @@
+/*-
+ * Copyright (c) 2004-2009 Apple Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of Apple Inc. ("Apple") nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/*
+ * Based on sample code from Marc Majka.
+ */
+#include <sys/types.h>
+
+#include <config/config.h>
+#ifdef HAVE_FULL_QUEUE_H
+#include <sys/queue.h>
+#else /* !HAVE_FULL_QUEUE_H */
+#include <compat/queue.h>
+#endif /* !HAVE_FULL_QUEUE_H */
+
+#include <bsm/audit_internal.h>
+#include <bsm/libbsm.h>
+
+#include <errno.h>
+#include <inttypes.h>
+#include <stdarg.h>
+#include <string.h>
+#include <syslog.h>
+
+
+#ifdef __APPLE__
+#include <notify.h>
+/* If 1, assumes a kernel that sends the right notification. */
+#define AUDIT_NOTIFICATION_ENABLED 1
+
+#if AUDIT_NOTIFICATION_ENABLED
+static int token = 0;
+#endif /* AUDIT_NOTIFICATION_ENABLED */
+
+static int au_cond = AUC_UNSET; /* <bsm/audit.h> */
+
+uint32_t
+au_notify_initialize(void)
+{
+#if AUDIT_NOTIFICATION_ENABLED
+ uint32_t status;
+ int ignore_first;
+
+ status = notify_register_check(__BSM_INTERNAL_NOTIFY_KEY, &token);
+ if (status != NOTIFY_STATUS_OK)
+ return (status);
+ status = notify_check(token, &ignore_first);
+ if (status != NOTIFY_STATUS_OK)
+ return (status);
+#endif
+
+ if (audit_get_cond(&au_cond) != 0) {
+ syslog(LOG_ERR, "Initial audit status check failed (%s)",
+ strerror(errno));
+ if (errno == ENOSYS) /* auditon() unimplemented. */
+ return (AU_UNIMPL);
+ return (NOTIFY_STATUS_FAILED); /* Is there a better code? */
+ }
+ return (NOTIFY_STATUS_OK);
+}
+
+int
+au_notify_terminate(void)
+{
+
+#if AUDIT_NOTIFICATION_ENABLED
+ return ((notify_cancel(token) == NOTIFY_STATUS_OK) ? 0 : -1);
+#else
+ return (0);
+#endif
+}
+
+/*
+ * On error of any notify(3) call, reset 'au_cond' to ensure we re-run
+ * au_notify_initialize() next time 'round--but assume auditing is on. This
+ * is a slight performance hit if auditing is off, but at least the system
+ * will behave correctly. The notification calls are unlikely to fail,
+ * anyway.
+ */
+int
+au_get_state(void)
+{
+#if AUDIT_NOTIFICATION_ENABLED
+ int did_notify;
+#endif
+ int status;
+
+ /*
+ * Don't make the client initialize this set of routines, but take the
+ * slight performance hit by checking ourselves every time.
+ */
+ if (au_cond == AUC_UNSET) {
+ status = au_notify_initialize();
+ if (status != NOTIFY_STATUS_OK) {
+ if (status == AU_UNIMPL)
+ return (AU_UNIMPL);
+ return (AUC_AUDITING);
+ } else
+ return (au_cond);
+ }
+#if AUDIT_NOTIFICATION_ENABLED
+ status = notify_check(token, &did_notify);
+ if (status != NOTIFY_STATUS_OK) {
+ au_cond = AUC_UNSET;
+ return (AUC_AUDITING);
+ }
+
+ if (did_notify == 0)
+ return (au_cond);
+#endif
+
+ if (audit_get_cond(&au_cond) != 0) {
+ /* XXX Reset au_cond to AUC_UNSET? */
+ syslog(LOG_ERR, "Audit status check failed (%s)",
+ strerror(errno));
+ if (errno == ENOSYS) /* Function unimplemented. */
+ return (AU_UNIMPL);
+ return (errno);
+ }
+
+ switch (au_cond) {
+ case AUC_NOAUDIT: /* Auditing suspended. */
+ case AUC_DISABLED: /* Auditing shut off. */
+ return (AUC_NOAUDIT);
+
+ case AUC_UNSET: /* Uninitialized; shouldn't get here. */
+ case AUC_AUDITING: /* Audit on. */
+ default:
+ return (AUC_AUDITING);
+ }
+}
+#endif /* !__APPLE__ */
+
+int
+cannot_audit(int val __unused)
+{
+#ifdef __APPLE__
+ return (!(au_get_state() == AUC_AUDITING));
+#else
+ int cond;
+
+ if (audit_get_cond(&cond) != 0) {
+ if (errno != ENOSYS) {
+ syslog(LOG_ERR, "Audit status check failed (%s)",
+ strerror(errno));
+ }
+ return (1);
+ }
+ if (cond == AUC_NOAUDIT || cond == AUC_DISABLED)
+ return (1);
+ return (0);
+#endif /* !__APPLE__ */
+}
Copied: vendor/openbsm/1.2_alpha4/libbsm/bsm_socket_type.c (from rev 11163, vendor/openbsm/dist/libbsm/bsm_socket_type.c)
===================================================================
--- vendor/openbsm/1.2_alpha4/libbsm/bsm_socket_type.c (rev 0)
+++ vendor/openbsm/1.2_alpha4/libbsm/bsm_socket_type.c 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,102 @@
+/*-
+ * Copyright (c) 2008 Apple Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of Apple Inc. ("Apple") nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <sys/types.h>
+#include <sys/socket.h>
+
+#include <config/config.h>
+
+#include <bsm/audit_socket_type.h>
+#include <bsm/libbsm.h>
+
+struct bsm_socket_type {
+ u_short bst_bsm_socket_type;
+ int bst_local_socket_type;
+};
+
+#define ST_NO_LOCAL_MAPPING -600
+
+static const struct bsm_socket_type bsm_socket_types[] = {
+ { BSM_SOCK_DGRAM, SOCK_DGRAM },
+ { BSM_SOCK_STREAM, SOCK_STREAM },
+ { BSM_SOCK_RAW, SOCK_RAW },
+ { BSM_SOCK_RDM, SOCK_RDM },
+ { BSM_SOCK_SEQPACKET, SOCK_SEQPACKET },
+};
+static const int bsm_socket_types_count = sizeof(bsm_socket_types) /
+ sizeof(bsm_socket_types[0]);
+
+static const struct bsm_socket_type *
+bsm_lookup_local_socket_type(int local_socket_type)
+{
+ int i;
+
+ for (i = 0; i < bsm_socket_types_count; i++) {
+ if (bsm_socket_types[i].bst_local_socket_type ==
+ local_socket_type)
+ return (&bsm_socket_types[i]);
+ }
+ return (NULL);
+}
+
+u_short
+au_socket_type_to_bsm(int local_socket_type)
+{
+ const struct bsm_socket_type *bstp;
+
+ bstp = bsm_lookup_local_socket_type(local_socket_type);
+ if (bstp == NULL)
+ return (BSM_SOCK_UNKNOWN);
+ return (bstp->bst_bsm_socket_type);
+}
+
+static const struct bsm_socket_type *
+bsm_lookup_bsm_socket_type(u_short bsm_socket_type)
+{
+ int i;
+
+ for (i = 0; i < bsm_socket_types_count; i++) {
+ if (bsm_socket_types[i].bst_bsm_socket_type ==
+ bsm_socket_type)
+ return (&bsm_socket_types[i]);
+ }
+ return (NULL);
+}
+
+int
+au_bsm_to_socket_type(u_short bsm_socket_type, int *local_socket_typep)
+{
+ const struct bsm_socket_type *bstp;
+
+ bstp = bsm_lookup_bsm_socket_type(bsm_socket_type);
+ if (bstp == NULL || bstp->bst_local_socket_type)
+ return (-1);
+ *local_socket_typep = bstp->bst_local_socket_type;
+ return (0);
+}
Deleted: vendor/openbsm/1.2_alpha4/libbsm/bsm_token.c
===================================================================
--- vendor/openbsm/dist/libbsm/bsm_token.c 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/libbsm/bsm_token.c 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,1399 +0,0 @@
-/*
- * Copyright (c) 2004 Apple Computer, Inc.
- * Copyright (c) 2005 SPARTA, Inc.
- * All rights reserved.
- *
- * This code was developed in part by Robert N. M. Watson, Senior Principal
- * Scientist, SPARTA, Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. Neither the name of Apple Computer, Inc. ("Apple") nor the names of
- * its contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR
- * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
- * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- * $P4: //depot/projects/trustedbsd/openbsm/libbsm/bsm_token.c#63 $
- */
-
-#include <sys/types.h>
-
-#include <config/config.h>
-#ifdef HAVE_SYS_ENDIAN_H
-#include <sys/endian.h>
-#else /* !HAVE_SYS_ENDIAN_H */
-#ifdef HAVE_MACHINE_ENDIAN_H
-#include <machine/endian.h>
-#else /* !HAVE_MACHINE_ENDIAN_H */
-#ifdef HAVE_ENDIAN_H
-#include <endian.h>
-#else /* !HAVE_ENDIAN_H */
-#error "No supported endian.h"
-#endif /* !HAVE_ENDIAN_H */
-#endif /* !HAVE_MACHINE_ENDIAN_H */
-#include <compat/endian.h>
-#endif /* !HAVE_SYS_ENDIAN_H */
-#ifdef HAVE_FULL_QUEUE_H
-#include <sys/queue.h>
-#else /* !HAVE_FULL_QUEUE_H */
-#include <compat/queue.h>
-#endif /* !HAVE_FULL_QUEUE_H */
-
-#include <sys/socket.h>
-#include <sys/time.h>
-#include <sys/un.h>
-
-#include <sys/ipc.h>
-
-#include <netinet/in.h>
-#include <netinet/in_systm.h>
-#include <netinet/ip.h>
-
-#include <assert.h>
-#include <errno.h>
-#include <string.h>
-#include <stdlib.h>
-#include <unistd.h>
-
-#include <bsm/audit_internal.h>
-#include <bsm/libbsm.h>
-
-#define GET_TOKEN_AREA(t, dptr, length) do { \
- (t) = malloc(sizeof(token_t)); \
- if ((t) != NULL) { \
- (t)->len = (length); \
- (dptr) = (t->t_data) = malloc((length) * sizeof(u_char)); \
- if ((dptr) == NULL) { \
- free(t); \
- (t) = NULL; \
- } else \
- memset((dptr), 0, (length)); \
- } else \
- (dptr) = NULL; \
- assert(t == NULL || dptr != NULL); \
-} while (0)
-
-/*
- * token ID 1 byte
- * argument # 1 byte
- * argument value 4 bytes/8 bytes (32-bit/64-bit value)
- * text length 2 bytes
- * text N bytes + 1 terminating NULL byte
- */
-token_t *
-au_to_arg32(char n, char *text, u_int32_t v)
-{
- token_t *t;
- u_char *dptr = NULL;
- u_int16_t textlen;
-
- textlen = strlen(text);
- textlen += 1;
-
- GET_TOKEN_AREA(t, dptr, 2 * sizeof(u_char) + sizeof(u_int32_t) +
- sizeof(u_int16_t) + textlen);
- if (t == NULL)
- return (NULL);
-
- ADD_U_CHAR(dptr, AUT_ARG32);
- ADD_U_CHAR(dptr, n);
- ADD_U_INT32(dptr, v);
- ADD_U_INT16(dptr, textlen);
- ADD_STRING(dptr, text, textlen);
-
- return (t);
-
-}
-
-token_t *
-au_to_arg64(char n, char *text, u_int64_t v)
-{
- token_t *t;
- u_char *dptr = NULL;
- u_int16_t textlen;
-
- textlen = strlen(text);
- textlen += 1;
-
- GET_TOKEN_AREA(t, dptr, 2 * sizeof(u_char) + sizeof(u_int64_t) +
- sizeof(u_int16_t) + textlen);
- if (t == NULL)
- return (NULL);
-
- ADD_U_CHAR(dptr, AUT_ARG64);
- ADD_U_CHAR(dptr, n);
- ADD_U_INT64(dptr, v);
- ADD_U_INT16(dptr, textlen);
- ADD_STRING(dptr, text, textlen);
-
- return (t);
-
-}
-
-token_t *
-au_to_arg(char n, char *text, u_int32_t v)
-{
-
- return (au_to_arg32(n, text, v));
-}
-
-#if defined(_KERNEL) || defined(KERNEL)
-/*
- * token ID 1 byte
- * file access mode 4 bytes
- * owner user ID 4 bytes
- * owner group ID 4 bytes
- * file system ID 4 bytes
- * node ID 8 bytes
- * device 4 bytes/8 bytes (32-bit/64-bit)
- */
-token_t *
-au_to_attr32(struct vnode_au_info *vni)
-{
- token_t *t;
- u_char *dptr = NULL;
- u_int16_t pad0_16 = 0;
- u_int16_t pad0_32 = 0;
-
- GET_TOKEN_AREA(t, dptr, sizeof(u_char) + 2 * sizeof(u_int16_t) +
- 3 * sizeof(u_int32_t) + sizeof(u_int64_t) + sizeof(u_int32_t));
- if (t == NULL)
- return (NULL);
-
- ADD_U_CHAR(dptr, AUT_ATTR32);
-
- /*
- * Darwin defines the size for the file mode
- * as 2 bytes; BSM defines 4 so pad with 0
- */
- ADD_U_INT16(dptr, pad0_16);
- ADD_U_INT16(dptr, vni->vn_mode);
-
- ADD_U_INT32(dptr, vni->vn_uid);
- ADD_U_INT32(dptr, vni->vn_gid);
- ADD_U_INT32(dptr, vni->vn_fsid);
-
- /*
- * Some systems use 32-bit file ID's, other's use 64-bit file IDs.
- * Attempt to handle both, and let the compiler sort it out. If we
- * could pick this out at compile-time, it would be better, so as to
- * avoid the else case below.
- */
- if (sizeof(vni->vn_fileid) == sizeof(uint32_t)) {
- ADD_U_INT32(dptr, pad0_32);
- ADD_U_INT32(dptr, vni->vn_fileid);
- } else if (sizeof(vni->vn_fileid) == sizeof(uint64_t))
- ADD_U_INT64(dptr, vni->vn_fileid);
- else
- ADD_U_INT64(dptr, 0LL);
-
- ADD_U_INT32(dptr, vni->vn_dev);
-
- return (t);
-}
-
-token_t *
-au_to_attr64(struct vnode_au_info *vni)
-{
- token_t *t;
- u_char *dptr = NULL;
- u_int16_t pad0_16 = 0;
- u_int16_t pad0_32 = 0;
-
- GET_TOKEN_AREA(t, dptr, sizeof(u_char) + 2 * sizeof(u_int16_t) +
- 3 * sizeof(u_int32_t) + sizeof(u_int64_t) * 2);
- if (t == NULL)
- return (NULL);
-
- ADD_U_CHAR(dptr, AUT_ATTR64);
-
- /*
- * Darwin defines the size for the file mode
- * as 2 bytes; BSM defines 4 so pad with 0
- */
- ADD_U_INT16(dptr, pad0_16);
- ADD_U_INT16(dptr, vni->vn_mode);
-
- ADD_U_INT32(dptr, vni->vn_uid);
- ADD_U_INT32(dptr, vni->vn_gid);
- ADD_U_INT32(dptr, vni->vn_fsid);
-
- /*
- * Some systems use 32-bit file ID's, other's use 64-bit file IDs.
- * Attempt to handle both, and let the compiler sort it out. If we
- * could pick this out at compile-time, it would be better, so as to
- * avoid the else case below.
- */
- if (sizeof(vni->vn_fileid) == sizeof(uint32_t)) {
- ADD_U_INT32(dptr, pad0_32);
- ADD_U_INT32(dptr, vni->vn_fileid);
- } else if (sizeof(vni->vn_fileid) == sizeof(uint64_t))
- ADD_U_INT64(dptr, vni->vn_fileid);
- else
- ADD_U_INT64(dptr, 0LL);
-
- ADD_U_INT64(dptr, vni->vn_dev);
-
- return (t);
-}
-
-token_t *
-au_to_attr(struct vnode_au_info *vni)
-{
-
- return (au_to_attr32(vni));
-}
-#endif /* !(defined(_KERNEL) || defined(KERNEL) */
-
-/*
- * token ID 1 byte
- * how to print 1 byte
- * basic unit 1 byte
- * unit count 1 byte
- * data items (depends on basic unit)
- */
-token_t *
-au_to_data(char unit_print, char unit_type, char unit_count, char *p)
-{
- token_t *t;
- u_char *dptr = NULL;
- size_t datasize, totdata;
-
- /* Determine the size of the basic unit. */
- switch (unit_type) {
- case AUR_BYTE:
- /* case AUR_CHAR: */
- datasize = AUR_BYTE_SIZE;
- break;
-
- case AUR_SHORT:
- datasize = AUR_SHORT_SIZE;
- break;
-
- case AUR_INT32:
- /* case AUR_INT: */
- datasize = AUR_INT32_SIZE;
- break;
-
- case AUR_INT64:
- datasize = AUR_INT64_SIZE;
- break;
-
- default:
- errno = EINVAL;
- return (NULL);
- }
-
- totdata = datasize * unit_count;
-
- GET_TOKEN_AREA(t, dptr, 4 * sizeof(u_char) + totdata);
- if (t == NULL)
- return (NULL);
-
- ADD_U_CHAR(dptr, AUT_DATA);
- ADD_U_CHAR(dptr, unit_print);
- ADD_U_CHAR(dptr, unit_type);
- ADD_U_CHAR(dptr, unit_count);
- ADD_MEM(dptr, p, totdata);
-
- return (t);
-}
-
-
-/*
- * token ID 1 byte
- * status 4 bytes
- * return value 4 bytes
- */
-token_t *
-au_to_exit(int retval, int err)
-{
- token_t *t;
- u_char *dptr = NULL;
-
- GET_TOKEN_AREA(t, dptr, sizeof(u_char) + 2 * sizeof(u_int32_t));
- if (t == NULL)
- return (NULL);
-
- ADD_U_CHAR(dptr, AUT_EXIT);
- ADD_U_INT32(dptr, err);
- ADD_U_INT32(dptr, retval);
-
- return (t);
-}
-
-/*
- */
-token_t *
-au_to_groups(int *groups)
-{
-
- return (au_to_newgroups(AUDIT_MAX_GROUPS, (gid_t*)groups));
-}
-
-/*
- * token ID 1 byte
- * number groups 2 bytes
- * group list count * 4 bytes
- */
-token_t *
-au_to_newgroups(u_int16_t n, gid_t *groups)
-{
- token_t *t;
- u_char *dptr = NULL;
- int i;
-
- GET_TOKEN_AREA(t, dptr, sizeof(u_char) + sizeof(u_int16_t) +
- n * sizeof(u_int32_t));
- if (t == NULL)
- return (NULL);
-
- ADD_U_CHAR(dptr, AUT_NEWGROUPS);
- ADD_U_INT16(dptr, n);
- for (i = 0; i < n; i++)
- ADD_U_INT32(dptr, groups[i]);
-
- return (t);
-}
-
-/*
- * token ID 1 byte
- * internet address 4 bytes
- */
-token_t *
-au_to_in_addr(struct in_addr *internet_addr)
-{
- token_t *t;
- u_char *dptr = NULL;
-
- GET_TOKEN_AREA(t, dptr, sizeof(u_char) + sizeof(uint32_t));
- if (t == NULL)
- return (NULL);
-
- ADD_U_CHAR(dptr, AUT_IN_ADDR);
- ADD_MEM(dptr, &internet_addr->s_addr, sizeof(uint32_t));
-
- return (t);
-}
-
-/*
- * token ID 1 byte
- * address type/length 4 bytes
- * Address 16 bytes
- */
-token_t *
-au_to_in_addr_ex(struct in6_addr *internet_addr)
-{
- token_t *t;
- u_char *dptr = NULL;
- u_int32_t type = AF_INET6;
-
- GET_TOKEN_AREA(t, dptr, sizeof(u_char) + 5 * sizeof(uint32_t));
- if (t == NULL)
- return (NULL);
-
- ADD_U_CHAR(dptr, AUT_IN_ADDR_EX);
- ADD_U_INT32(dptr, type);
- ADD_MEM(dptr, internet_addr, 4 * sizeof(uint32_t));
-
- return (t);
-}
-
-/*
- * token ID 1 byte
- * ip header 20 bytes
- *
- * The IP header should be submitted in network byte order.
- */
-token_t *
-au_to_ip(struct ip *ip)
-{
- token_t *t;
- u_char *dptr = NULL;
-
- GET_TOKEN_AREA(t, dptr, sizeof(u_char) + sizeof(struct ip));
- if (t == NULL)
- return (NULL);
-
- ADD_U_CHAR(dptr, AUT_IP);
- ADD_MEM(dptr, ip, sizeof(struct ip));
-
- return (t);
-}
-
-/*
- * token ID 1 byte
- * object ID type 1 byte
- * object ID 4 bytes
- */
-token_t *
-au_to_ipc(char type, int id)
-{
- token_t *t;
- u_char *dptr = NULL;
-
- GET_TOKEN_AREA(t, dptr, 2 * sizeof(u_char) + sizeof(u_int32_t));
- if (t == NULL)
- return (NULL);
-
- ADD_U_CHAR(dptr, AUT_IPC);
- ADD_U_CHAR(dptr, type);
- ADD_U_INT32(dptr, id);
-
- return (t);
-}
-
-/*
- * token ID 1 byte
- * owner user ID 4 bytes
- * owner group ID 4 bytes
- * creator user ID 4 bytes
- * creator group ID 4 bytes
- * access mode 4 bytes
- * slot sequence # 4 bytes
- * key 4 bytes
- */
-token_t *
-au_to_ipc_perm(struct ipc_perm *perm)
-{
- token_t *t;
- u_char *dptr = NULL;
- u_int16_t pad0 = 0;
-
- GET_TOKEN_AREA(t, dptr, 12 * sizeof(u_int16_t) + sizeof(u_int32_t));
- if (t == NULL)
- return (NULL);
-
- ADD_U_CHAR(dptr, AUT_IPC_PERM);
-
- /*
- * Darwin defines the sizes for ipc_perm members
- * as 2 bytes; BSM defines 4 so pad with 0
- */
- ADD_U_INT16(dptr, pad0);
- ADD_U_INT16(dptr, perm->uid);
-
- ADD_U_INT16(dptr, pad0);
- ADD_U_INT16(dptr, perm->gid);
-
- ADD_U_INT16(dptr, pad0);
- ADD_U_INT16(dptr, perm->cuid);
-
- ADD_U_INT16(dptr, pad0);
- ADD_U_INT16(dptr, perm->cgid);
-
- ADD_U_INT16(dptr, pad0);
- ADD_U_INT16(dptr, perm->mode);
-
- ADD_U_INT16(dptr, pad0);
-
-#ifdef HAVE_IPC_PERM___SEQ
- ADD_U_INT16(dptr, perm->__seq);
-#else
- ADD_U_INT16(dptr, perm->seq);
-#endif
-
-#ifdef HAVE_IPC_PERM___KEY
- ADD_U_INT32(dptr, perm->__key);
-#else
- ADD_U_INT32(dptr, perm->key);
-#endif
-
- return (t);
-}
-
-/*
- * token ID 1 byte
- * port IP address 2 bytes
- */
-token_t *
-au_to_iport(u_int16_t iport)
-{
- token_t *t;
- u_char *dptr = NULL;
-
- GET_TOKEN_AREA(t, dptr, sizeof(u_char) + sizeof(u_int16_t));
- if (t == NULL)
- return (NULL);
-
- ADD_U_CHAR(dptr, AUT_IPORT);
- ADD_U_INT16(dptr, iport);
-
- return (t);
-}
-
-/*
- * token ID 1 byte
- * size 2 bytes
- * data size bytes
- */
-token_t *
-au_to_opaque(char *data, u_int16_t bytes)
-{
- token_t *t;
- u_char *dptr = NULL;
-
- GET_TOKEN_AREA(t, dptr, sizeof(u_char) + sizeof(u_int16_t) + bytes);
- if (t == NULL)
- return (NULL);
-
- ADD_U_CHAR(dptr, AUT_OPAQUE);
- ADD_U_INT16(dptr, bytes);
- ADD_MEM(dptr, data, bytes);
-
- return (t);
-}
-
-/*
- * token ID 1 byte
- * seconds of time 4 bytes
- * milliseconds of time 4 bytes
- * file name len 2 bytes
- * file pathname N bytes + 1 terminating NULL byte
- */
-token_t *
-au_to_file(char *file, struct timeval tm)
-{
- token_t *t;
- u_char *dptr = NULL;
- u_int16_t filelen;
- u_int32_t timems;
-
- filelen = strlen(file);
- filelen += 1;
-
- GET_TOKEN_AREA(t, dptr, sizeof(u_char) + 2 * sizeof(u_int32_t) +
- sizeof(u_int16_t) + filelen);
- if (t == NULL)
- return (NULL);
-
- timems = tm.tv_usec/1000;
-
- ADD_U_CHAR(dptr, AUT_OTHER_FILE32);
- ADD_U_INT32(dptr, tm.tv_sec);
- ADD_U_INT32(dptr, timems); /* We need time in ms. */
- ADD_U_INT16(dptr, filelen);
- ADD_STRING(dptr, file, filelen);
-
- return (t);
-}
-
-/*
- * token ID 1 byte
- * text length 2 bytes
- * text N bytes + 1 terminating NULL byte
- */
-token_t *
-au_to_text(char *text)
-{
- token_t *t;
- u_char *dptr = NULL;
- u_int16_t textlen;
-
- textlen = strlen(text);
- textlen += 1;
-
- GET_TOKEN_AREA(t, dptr, sizeof(u_char) + sizeof(u_int16_t) + textlen);
- if (t == NULL)
- return (NULL);
-
- ADD_U_CHAR(dptr, AUT_TEXT);
- ADD_U_INT16(dptr, textlen);
- ADD_STRING(dptr, text, textlen);
-
- return (t);
-}
-
-/*
- * token ID 1 byte
- * path length 2 bytes
- * path N bytes + 1 terminating NULL byte
- */
-token_t *
-au_to_path(char *text)
-{
- token_t *t;
- u_char *dptr = NULL;
- u_int16_t textlen;
-
- textlen = strlen(text);
- textlen += 1;
-
- GET_TOKEN_AREA(t, dptr, sizeof(u_char) + sizeof(u_int16_t) + textlen);
- if (t == NULL)
- return (NULL);
-
- ADD_U_CHAR(dptr, AUT_PATH);
- ADD_U_INT16(dptr, textlen);
- ADD_STRING(dptr, text, textlen);
-
- return (t);
-}
-
-/*
- * token ID 1 byte
- * audit ID 4 bytes
- * effective user ID 4 bytes
- * effective group ID 4 bytes
- * real user ID 4 bytes
- * real group ID 4 bytes
- * process ID 4 bytes
- * session ID 4 bytes
- * terminal ID
- * port ID 4 bytes/8 bytes (32-bit/64-bit value)
- * machine address 4 bytes
- */
-token_t *
-au_to_process32(au_id_t auid, uid_t euid, gid_t egid, uid_t ruid, gid_t rgid,
- pid_t pid, au_asid_t sid, au_tid_t *tid)
-{
- token_t *t;
- u_char *dptr = NULL;
-
- GET_TOKEN_AREA(t, dptr, sizeof(u_char) + 9 * sizeof(u_int32_t));
- if (t == NULL)
- return (NULL);
-
- ADD_U_CHAR(dptr, AUT_PROCESS32);
- ADD_U_INT32(dptr, auid);
- ADD_U_INT32(dptr, euid);
- ADD_U_INT32(dptr, egid);
- ADD_U_INT32(dptr, ruid);
- ADD_U_INT32(dptr, rgid);
- ADD_U_INT32(dptr, pid);
- ADD_U_INT32(dptr, sid);
- ADD_U_INT32(dptr, tid->port);
- ADD_MEM(dptr, &tid->machine, sizeof(u_int32_t));
-
- return (t);
-}
-
-token_t *
-au_to_process64(au_id_t auid, uid_t euid, gid_t egid, uid_t ruid, gid_t rgid,
- pid_t pid, au_asid_t sid, au_tid_t *tid)
-{
- token_t *t;
- u_char *dptr = NULL;
-
- GET_TOKEN_AREA(t, dptr, sizeof(u_char) + 8 * sizeof(u_int32_t) +
- sizeof(u_int64_t));
- if (t == NULL)
- return (NULL);
-
- ADD_U_CHAR(dptr, AUT_PROCESS64);
- ADD_U_INT32(dptr, auid);
- ADD_U_INT32(dptr, euid);
- ADD_U_INT32(dptr, egid);
- ADD_U_INT32(dptr, ruid);
- ADD_U_INT32(dptr, rgid);
- ADD_U_INT32(dptr, pid);
- ADD_U_INT32(dptr, sid);
- ADD_U_INT64(dptr, tid->port);
- ADD_MEM(dptr, &tid->machine, sizeof(u_int32_t));
-
- return (t);
-}
-
-token_t *
-au_to_process(au_id_t auid, uid_t euid, gid_t egid, uid_t ruid, gid_t rgid,
- pid_t pid, au_asid_t sid, au_tid_t *tid)
-{
-
- return (au_to_process32(auid, euid, egid, ruid, rgid, pid, sid,
- tid));
-}
-
-/*
- * token ID 1 byte
- * audit ID 4 bytes
- * effective user ID 4 bytes
- * effective group ID 4 bytes
- * real user ID 4 bytes
- * real group ID 4 bytes
- * process ID 4 bytes
- * session ID 4 bytes
- * terminal ID
- * port ID 4 bytes/8 bytes (32-bit/64-bit value)
- * address type-len 4 bytes
- * machine address 16 bytes
- */
-token_t *
-au_to_process32_ex(au_id_t auid, uid_t euid, gid_t egid, uid_t ruid,
- gid_t rgid, pid_t pid, au_asid_t sid, au_tid_addr_t *tid)
-{
- token_t *t;
- u_char *dptr = NULL;
-
- if (tid->at_type == AU_IPv4)
- GET_TOKEN_AREA(t, dptr, sizeof(u_char) +
- 10 * sizeof(u_int32_t));
- else if (tid->at_type == AU_IPv6)
- GET_TOKEN_AREA(t, dptr, sizeof(u_char) +
- 13 * sizeof(u_int32_t));
- else {
- errno = EINVAL;
- return (NULL);
- }
- if (t == NULL)
- return (NULL);
-
- ADD_U_CHAR(dptr, AUT_PROCESS32_EX);
- ADD_U_INT32(dptr, auid);
- ADD_U_INT32(dptr, euid);
- ADD_U_INT32(dptr, egid);
- ADD_U_INT32(dptr, ruid);
- ADD_U_INT32(dptr, rgid);
- ADD_U_INT32(dptr, pid);
- ADD_U_INT32(dptr, sid);
- ADD_U_INT32(dptr, tid->at_port);
- ADD_U_INT32(dptr, tid->at_type);
- ADD_MEM(dptr, &tid->at_addr[0], sizeof(u_int32_t));
- if (tid->at_type == AU_IPv6) {
- ADD_MEM(dptr, &tid->at_addr[1], sizeof(u_int32_t));
- ADD_MEM(dptr, &tid->at_addr[2], sizeof(u_int32_t));
- ADD_MEM(dptr, &tid->at_addr[3], sizeof(u_int32_t));
- }
-
- return (t);
-}
-
-token_t *
-au_to_process64_ex(au_id_t auid, uid_t euid, gid_t egid, uid_t ruid,
- gid_t rgid, pid_t pid, au_asid_t sid, au_tid_addr_t *tid)
-{
- token_t *t;
- u_char *dptr = NULL;
-
- if (tid->at_type == AU_IPv4)
- GET_TOKEN_AREA(t, dptr, sizeof(u_char) +
- 7 * sizeof(u_int32_t) + sizeof(u_int64_t) +
- 2 * sizeof(u_int32_t));
- else if (tid->at_type == AU_IPv6)
- GET_TOKEN_AREA(t, dptr, sizeof(u_char) +
- 7 * sizeof(u_int32_t) + sizeof(u_int64_t) +
- 5 * sizeof(u_int32_t));
- else {
- errno = EINVAL;
- return (NULL);
- }
- if (t == NULL)
- return (NULL);
-
- ADD_U_CHAR(dptr, AUT_PROCESS64_EX);
- ADD_U_INT32(dptr, auid);
- ADD_U_INT32(dptr, euid);
- ADD_U_INT32(dptr, egid);
- ADD_U_INT32(dptr, ruid);
- ADD_U_INT32(dptr, rgid);
- ADD_U_INT32(dptr, pid);
- ADD_U_INT32(dptr, sid);
- ADD_U_INT64(dptr, tid->at_port);
- ADD_U_INT32(dptr, tid->at_type);
- ADD_MEM(dptr, &tid->at_addr[0], sizeof(u_int32_t));
- if (tid->at_type == AU_IPv6) {
- ADD_MEM(dptr, &tid->at_addr[1], sizeof(u_int32_t));
- ADD_MEM(dptr, &tid->at_addr[2], sizeof(u_int32_t));
- ADD_MEM(dptr, &tid->at_addr[3], sizeof(u_int32_t));
- }
-
- return (t);
-}
-
-token_t *
-au_to_process_ex(au_id_t auid, uid_t euid, gid_t egid, uid_t ruid,
- gid_t rgid, pid_t pid, au_asid_t sid, au_tid_addr_t *tid)
-{
-
- return (au_to_process32_ex(auid, euid, egid, ruid, rgid, pid, sid,
- tid));
-}
-
-/*
- * token ID 1 byte
- * error status 1 byte
- * return value 4 bytes/8 bytes (32-bit/64-bit value)
- */
-token_t *
-au_to_return32(char status, u_int32_t ret)
-{
- token_t *t;
- u_char *dptr = NULL;
-
- GET_TOKEN_AREA(t, dptr, 2 * sizeof(u_char) + sizeof(u_int32_t));
- if (t == NULL)
- return (NULL);
-
- ADD_U_CHAR(dptr, AUT_RETURN32);
- ADD_U_CHAR(dptr, status);
- ADD_U_INT32(dptr, ret);
-
- return (t);
-}
-
-token_t *
-au_to_return64(char status, u_int64_t ret)
-{
- token_t *t;
- u_char *dptr = NULL;
-
- GET_TOKEN_AREA(t, dptr, 2 * sizeof(u_char) + sizeof(u_int64_t));
- if (t == NULL)
- return (NULL);
-
- ADD_U_CHAR(dptr, AUT_RETURN64);
- ADD_U_CHAR(dptr, status);
- ADD_U_INT64(dptr, ret);
-
- return (t);
-}
-
-token_t *
-au_to_return(char status, u_int32_t ret)
-{
-
- return (au_to_return32(status, ret));
-}
-
-/*
- * token ID 1 byte
- * sequence number 4 bytes
- */
-token_t *
-au_to_seq(long audit_count)
-{
- token_t *t;
- u_char *dptr = NULL;
-
- GET_TOKEN_AREA(t, dptr, sizeof(u_char) + sizeof(u_int32_t));
- if (t == NULL)
- return (NULL);
-
- ADD_U_CHAR(dptr, AUT_SEQ);
- ADD_U_INT32(dptr, audit_count);
-
- return (t);
-}
-
-/*
- * token ID 1 byte
- * socket family 2 bytes
- * path 104 bytes
- */
-token_t *
-au_to_sock_unix(struct sockaddr_un *so)
-{
- token_t *t;
- u_char *dptr;
-
- GET_TOKEN_AREA(t, dptr, 3 * sizeof(u_char) + strlen(so->sun_path) + 1);
- if (t == NULL)
- return (NULL);
-
- ADD_U_CHAR(dptr, AU_SOCK_UNIX_TOKEN);
- /* BSM token has two bytes for family */
- ADD_U_CHAR(dptr, 0);
- ADD_U_CHAR(dptr, so->sun_family);
- ADD_STRING(dptr, so->sun_path, strlen(so->sun_path) + 1);
-
- return (t);
-}
-
-/*
- * token ID 1 byte
- * socket family 2 bytes
- * local port 2 bytes
- * socket address 4 bytes
- */
-token_t *
-au_to_sock_inet32(struct sockaddr_in *so)
-{
- token_t *t;
- u_char *dptr = NULL;
- uint16_t family;
-
- GET_TOKEN_AREA(t, dptr, sizeof(u_char) + 2 * sizeof(uint16_t) +
- sizeof(uint32_t));
- if (t == NULL)
- return (NULL);
-
- ADD_U_CHAR(dptr, AUT_SOCKINET32);
- /*
- * BSM defines the family field as 16 bits, but many operating
- * systems have an 8-bit sin_family field. Extend to 16 bits before
- * writing into the token. Assume that both the port and the address
- * in the sockaddr_in are already in network byte order, but family
- * is in local byte order.
- *
- * XXXRW: Should a name space conversion be taking place on the value
- * of sin_family?
- */
- family = so->sin_family;
- ADD_U_INT16(dptr, family);
- ADD_MEM(dptr, &so->sin_port, sizeof(uint16_t));
- ADD_MEM(dptr, &so->sin_addr.s_addr, sizeof(uint32_t));
-
- return (t);
-
-}
-
-token_t *
-au_to_sock_inet128(struct sockaddr_in6 *so)
-{
- token_t *t;
- u_char *dptr = NULL;
-
- GET_TOKEN_AREA(t, dptr, 3 * sizeof(u_char) + sizeof(u_int16_t) +
- 4 * sizeof(u_int32_t));
- if (t == NULL)
- return (NULL);
-
- ADD_U_CHAR(dptr, AUT_SOCKINET128);
- /*
- * In Darwin, sin6_family is one octet, but BSM defines the token
- * to store two. So we copy in a 0 first.
- */
- ADD_U_CHAR(dptr, 0);
- ADD_U_CHAR(dptr, so->sin6_family);
-
- ADD_U_INT16(dptr, so->sin6_port);
- ADD_MEM(dptr, &so->sin6_addr, 4 * sizeof(uint32_t));
-
- return (t);
-
-}
-
-token_t *
-au_to_sock_inet(struct sockaddr_in *so)
-{
-
- return (au_to_sock_inet32(so));
-}
-
-/*
- * token ID 1 byte
- * audit ID 4 bytes
- * effective user ID 4 bytes
- * effective group ID 4 bytes
- * real user ID 4 bytes
- * real group ID 4 bytes
- * process ID 4 bytes
- * session ID 4 bytes
- * terminal ID
- * port ID 4 bytes/8 bytes (32-bit/64-bit value)
- * machine address 4 bytes
- */
-token_t *
-au_to_subject32(au_id_t auid, uid_t euid, gid_t egid, uid_t ruid, gid_t rgid,
- pid_t pid, au_asid_t sid, au_tid_t *tid)
-{
- token_t *t;
- u_char *dptr = NULL;
-
- GET_TOKEN_AREA(t, dptr, sizeof(u_char) + 9 * sizeof(u_int32_t));
- if (t == NULL)
- return (NULL);
-
- ADD_U_CHAR(dptr, AUT_SUBJECT32);
- ADD_U_INT32(dptr, auid);
- ADD_U_INT32(dptr, euid);
- ADD_U_INT32(dptr, egid);
- ADD_U_INT32(dptr, ruid);
- ADD_U_INT32(dptr, rgid);
- ADD_U_INT32(dptr, pid);
- ADD_U_INT32(dptr, sid);
- ADD_U_INT32(dptr, tid->port);
- ADD_MEM(dptr, &tid->machine, sizeof(u_int32_t));
-
- return (t);
-}
-
-token_t *
-au_to_subject64(au_id_t auid, uid_t euid, gid_t egid, uid_t ruid, gid_t rgid,
- pid_t pid, au_asid_t sid, au_tid_t *tid)
-{
- token_t *t;
- u_char *dptr = NULL;
-
- GET_TOKEN_AREA(t, dptr, sizeof(u_char) + 7 * sizeof(u_int32_t) +
- sizeof(u_int64_t) + sizeof(u_int32_t));
- if (t == NULL)
- return (NULL);
-
- ADD_U_CHAR(dptr, AUT_SUBJECT64);
- ADD_U_INT32(dptr, auid);
- ADD_U_INT32(dptr, euid);
- ADD_U_INT32(dptr, egid);
- ADD_U_INT32(dptr, ruid);
- ADD_U_INT32(dptr, rgid);
- ADD_U_INT32(dptr, pid);
- ADD_U_INT32(dptr, sid);
- ADD_U_INT64(dptr, tid->port);
- ADD_MEM(dptr, &tid->machine, sizeof(u_int32_t));
-
- return (t);
-}
-
-token_t *
-au_to_subject(au_id_t auid, uid_t euid, gid_t egid, uid_t ruid, gid_t rgid,
- pid_t pid, au_asid_t sid, au_tid_t *tid)
-{
-
- return (au_to_subject32(auid, euid, egid, ruid, rgid, pid, sid,
- tid));
-}
-
-/*
- * token ID 1 byte
- * audit ID 4 bytes
- * effective user ID 4 bytes
- * effective group ID 4 bytes
- * real user ID 4 bytes
- * real group ID 4 bytes
- * process ID 4 bytes
- * session ID 4 bytes
- * terminal ID
- * port ID 4 bytes/8 bytes (32-bit/64-bit value)
- * address type/length 4 bytes
- * machine address 16 bytes
- */
-token_t *
-au_to_subject32_ex(au_id_t auid, uid_t euid, gid_t egid, uid_t ruid,
- gid_t rgid, pid_t pid, au_asid_t sid, au_tid_addr_t *tid)
-{
- token_t *t;
- u_char *dptr = NULL;
-
- if (tid->at_type == AU_IPv4)
- GET_TOKEN_AREA(t, dptr, sizeof(u_char) + 10 *
- sizeof(u_int32_t));
- else if (tid->at_type == AU_IPv6)
- GET_TOKEN_AREA(t, dptr, sizeof(u_char) + 13 *
- sizeof(u_int32_t));
- else {
- errno = EINVAL;
- return (NULL);
- }
- if (t == NULL)
- return (NULL);
-
- ADD_U_CHAR(dptr, AUT_SUBJECT32_EX);
- ADD_U_INT32(dptr, auid);
- ADD_U_INT32(dptr, euid);
- ADD_U_INT32(dptr, egid);
- ADD_U_INT32(dptr, ruid);
- ADD_U_INT32(dptr, rgid);
- ADD_U_INT32(dptr, pid);
- ADD_U_INT32(dptr, sid);
- ADD_U_INT32(dptr, tid->at_port);
- ADD_U_INT32(dptr, tid->at_type);
- if (tid->at_type == AU_IPv6)
- ADD_MEM(dptr, &tid->at_addr[0], 4 * sizeof(u_int32_t));
- else
- ADD_MEM(dptr, &tid->at_addr[0], sizeof(u_int32_t));
-
- return (t);
-}
-
-token_t *
-au_to_subject64_ex(au_id_t auid, uid_t euid, gid_t egid, uid_t ruid,
- gid_t rgid, pid_t pid, au_asid_t sid, au_tid_addr_t *tid)
-{
- token_t *t;
- u_char *dptr = NULL;
-
- if (tid->at_type == AU_IPv4)
- GET_TOKEN_AREA(t, dptr, sizeof(u_char) +
- 7 * sizeof(u_int32_t) + sizeof(u_int64_t) +
- 2 * sizeof(u_int32_t));
- else if (tid->at_type == AU_IPv6)
- GET_TOKEN_AREA(t, dptr, sizeof(u_char) +
- 7 * sizeof(u_int32_t) + sizeof(u_int64_t) +
- 5 * sizeof(u_int32_t));
- else {
- errno = EINVAL;
- return (NULL);
- }
- if (t == NULL)
- return (NULL);
-
- ADD_U_CHAR(dptr, AUT_SUBJECT64_EX);
- ADD_U_INT32(dptr, auid);
- ADD_U_INT32(dptr, euid);
- ADD_U_INT32(dptr, egid);
- ADD_U_INT32(dptr, ruid);
- ADD_U_INT32(dptr, rgid);
- ADD_U_INT32(dptr, pid);
- ADD_U_INT32(dptr, sid);
- ADD_U_INT64(dptr, tid->at_port);
- ADD_U_INT32(dptr, tid->at_type);
- if (tid->at_type == AU_IPv6)
- ADD_MEM(dptr, &tid->at_addr[0], 4 * sizeof(u_int32_t));
- else
- ADD_MEM(dptr, &tid->at_addr[0], sizeof(u_int32_t));
-
- return (t);
-}
-
-token_t *
-au_to_subject_ex(au_id_t auid, uid_t euid, gid_t egid, uid_t ruid,
- gid_t rgid, pid_t pid, au_asid_t sid, au_tid_addr_t *tid)
-{
-
- return (au_to_subject32_ex(auid, euid, egid, ruid, rgid, pid, sid,
- tid));
-}
-
-#if !defined(_KERNEL) && !defined(KERNEL) && defined(HAVE_AUDIT_SYSCALLS)
-/*
- * Collects audit information for the current process
- * and creates a subject token from it
- */
-token_t *
-au_to_me(void)
-{
- auditinfo_t auinfo;
-
- if (getaudit(&auinfo) != 0)
- return (NULL);
-
- return (au_to_subject32(auinfo.ai_auid, geteuid(), getegid(),
- getuid(), getgid(), getpid(), auinfo.ai_asid, &auinfo.ai_termid));
-}
-#endif
-
-/*
- * token ID 1 byte
- * count 4 bytes
- * text count null-terminated strings
- */
-token_t *
-au_to_exec_args(char **argv)
-{
- token_t *t;
- u_char *dptr = NULL;
- const char *nextarg;
- int i, count = 0;
- size_t totlen = 0;
-
- nextarg = *argv;
-
- while (nextarg != NULL) {
- int nextlen;
-
- nextlen = strlen(nextarg);
- totlen += nextlen + 1;
- count++;
- nextarg = *(argv + count);
- }
-
- totlen += count * sizeof(char); /* nul terminations. */
- GET_TOKEN_AREA(t, dptr, sizeof(u_char) + sizeof(u_int32_t) + totlen);
- if (t == NULL)
- return (NULL);
-
- ADD_U_CHAR(dptr, AUT_EXEC_ARGS);
- ADD_U_INT32(dptr, count);
-
- for (i = 0; i < count; i++) {
- nextarg = *(argv + i);
- ADD_MEM(dptr, nextarg, strlen(nextarg) + 1);
- }
-
- return (t);
-}
-
-/*
- * token ID 1 byte
- * zonename length 2 bytes
- * zonename N bytes + 1 terminating NULL byte
- */
-token_t *
-au_to_zonename(char *zonename)
-{
- u_char *dptr = NULL;
- u_int16_t textlen;
- token_t *t;
-
- textlen = strlen(zonename);
- textlen += 1;
- GET_TOKEN_AREA(t, dptr, sizeof(u_char) + sizeof(u_int16_t) + textlen);
- ADD_U_CHAR(dptr, AUT_ZONENAME);
- ADD_U_INT16(dptr, textlen);
- ADD_STRING(dptr, zonename, textlen);
- return (t);
-}
-
-/*
- * token ID 1 byte
- * count 4 bytes
- * text count null-terminated strings
- */
-token_t *
-au_to_exec_env(char **envp)
-{
- token_t *t;
- u_char *dptr = NULL;
- int i, count = 0;
- size_t totlen = 0;
- const char *nextenv;
-
- nextenv = *envp;
-
- while (nextenv != NULL) {
- int nextlen;
-
- nextlen = strlen(nextenv);
- totlen += nextlen + 1;
- count++;
- nextenv = *(envp + count);
- }
-
- totlen += sizeof(char) * count;
- GET_TOKEN_AREA(t, dptr, sizeof(u_char) + sizeof(u_int32_t) + totlen);
- if (t == NULL)
- return (NULL);
-
- ADD_U_CHAR(dptr, AUT_EXEC_ENV);
- ADD_U_INT32(dptr, count);
-
- for (i = 0; i < count; i++) {
- nextenv = *(envp + i);
- ADD_MEM(dptr, nextenv, strlen(nextenv) + 1);
- }
-
- return (t);
-}
-
-/*
- * token ID 1 byte
- * record byte count 4 bytes
- * version # 1 byte [2]
- * event type 2 bytes
- * event modifier 2 bytes
- * seconds of time 4 bytes/8 bytes (32-bit/64-bit value)
- * milliseconds of time 4 bytes/8 bytes (32-bit/64-bit value)
- */
-token_t *
-au_to_header32_tm(int rec_size, au_event_t e_type, au_emod_t e_mod,
- struct timeval tm)
-{
- token_t *t;
- u_char *dptr = NULL;
- u_int32_t timems;
-
- GET_TOKEN_AREA(t, dptr, sizeof(u_char) + sizeof(u_int32_t) +
- sizeof(u_char) + 2 * sizeof(u_int16_t) + 2 * sizeof(u_int32_t));
- if (t == NULL)
- return (NULL);
-
- ADD_U_CHAR(dptr, AUT_HEADER32);
- ADD_U_INT32(dptr, rec_size);
- ADD_U_CHAR(dptr, AUDIT_HEADER_VERSION_OPENBSM);
- ADD_U_INT16(dptr, e_type);
- ADD_U_INT16(dptr, e_mod);
-
- timems = tm.tv_usec/1000;
- /* Add the timestamp */
- ADD_U_INT32(dptr, tm.tv_sec);
- ADD_U_INT32(dptr, timems); /* We need time in ms. */
-
- return (t);
-}
-
-token_t *
-au_to_header64_tm(int rec_size, au_event_t e_type, au_emod_t e_mod,
- struct timeval tm)
-{
- token_t *t;
- u_char *dptr = NULL;
- u_int32_t timems;
-
- GET_TOKEN_AREA(t, dptr, sizeof(u_char) + sizeof(u_int32_t) +
- sizeof(u_char) + 2 * sizeof(u_int16_t) + 2 * sizeof(u_int64_t));
- if (t == NULL)
- return (NULL);
-
- ADD_U_CHAR(dptr, AUT_HEADER64);
- ADD_U_INT32(dptr, rec_size);
- ADD_U_CHAR(dptr, AUDIT_HEADER_VERSION_OPENBSM);
- ADD_U_INT16(dptr, e_type);
- ADD_U_INT16(dptr, e_mod);
-
- timems = tm.tv_usec/1000;
- /* Add the timestamp */
- ADD_U_INT64(dptr, tm.tv_sec);
- ADD_U_INT64(dptr, timems); /* We need time in ms. */
-
- return (t);
-}
-
-#if !defined(KERNEL) && !defined(_KERNEL)
-token_t *
-au_to_header32(int rec_size, au_event_t e_type, au_emod_t e_mod)
-{
- struct timeval tm;
-
- if (gettimeofday(&tm, NULL) == -1)
- return (NULL);
- return (au_to_header32_tm(rec_size, e_type, e_mod, tm));
-}
-
-token_t *
-au_to_header64(__unused int rec_size, __unused au_event_t e_type,
- __unused au_emod_t e_mod)
-{
- struct timeval tm;
-
- if (gettimeofday(&tm, NULL) == -1)
- return (NULL);
- return (au_to_header64_tm(rec_size, e_type, e_mod, tm));
-}
-
-token_t *
-au_to_header(int rec_size, au_event_t e_type, au_emod_t e_mod)
-{
-
- return (au_to_header32(rec_size, e_type, e_mod));
-}
-#endif
-
-/*
- * token ID 1 byte
- * trailer magic number 2 bytes
- * record byte count 4 bytes
- */
-token_t *
-au_to_trailer(int rec_size)
-{
- token_t *t;
- u_char *dptr = NULL;
- u_int16_t magic = TRAILER_PAD_MAGIC;
-
- GET_TOKEN_AREA(t, dptr, sizeof(u_char) + sizeof(u_int16_t) +
- sizeof(u_int32_t));
- if (t == NULL)
- return (NULL);
-
- ADD_U_CHAR(dptr, AUT_TRAILER);
- ADD_U_INT16(dptr, magic);
- ADD_U_INT32(dptr, rec_size);
-
- return (t);
-}
Copied: vendor/openbsm/1.2_alpha4/libbsm/bsm_token.c (from rev 11163, vendor/openbsm/dist/libbsm/bsm_token.c)
===================================================================
--- vendor/openbsm/1.2_alpha4/libbsm/bsm_token.c (rev 0)
+++ vendor/openbsm/1.2_alpha4/libbsm/bsm_token.c 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,1645 @@
+/*-
+ * Copyright (c) 2004-2009 Apple Inc.
+ * Copyright (c) 2005 SPARTA, Inc.
+ * All rights reserved.
+ *
+ * This code was developed in part by Robert N. M. Watson, Senior Principal
+ * Scientist, SPARTA, Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of Apple Inc. ("Apple") nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <sys/types.h>
+
+#include <config/config.h>
+
+#ifdef USE_ENDIAN_H
+#include <endian.h>
+#endif
+#ifdef USE_SYS_ENDIAN_H
+#include <sys/endian.h>
+#endif
+#ifdef USE_MACHINE_ENDIAN_H
+#include <machine/endian.h>
+#endif
+#ifdef USE_COMPAT_ENDIAN_H
+#include <compat/endian.h>
+#endif
+#ifdef USE_COMPAT_ENDIAN_ENC_H
+#include <compat/endian_enc.h>
+#endif
+
+#ifdef HAVE_FULL_QUEUE_H
+#include <sys/queue.h>
+#else /* !HAVE_FULL_QUEUE_H */
+#include <compat/queue.h>
+#endif /* !HAVE_FULL_QUEUE_H */
+
+#include <sys/socket.h>
+#include <sys/time.h>
+#include <sys/un.h>
+
+#include <sys/ipc.h>
+
+#include <netinet/in.h>
+#include <netinet/in_systm.h>
+#include <netinet/ip.h>
+
+#include <assert.h>
+#include <errno.h>
+#include <string.h>
+#include <stdlib.h>
+#include <unistd.h>
+
+#include <bsm/audit_internal.h>
+#include <bsm/libbsm.h>
+
+#define GET_TOKEN_AREA(t, dptr, length) do { \
+ (t) = malloc(sizeof(token_t)); \
+ if ((t) != NULL) { \
+ (t)->len = (length); \
+ (dptr) = (t->t_data) = calloc((length), sizeof(u_char)); \
+ if ((dptr) == NULL) { \
+ free(t); \
+ (t) = NULL; \
+ } \
+ } else \
+ (dptr) = NULL; \
+ assert((t) == NULL || (dptr) != NULL); \
+} while (0)
+
+/*
+ * token ID 1 byte
+ * success/failure 1 byte
+ * privstrlen 2 bytes
+ * privstr N bytes + 1 (\0 byte)
+ */
+token_t *
+au_to_upriv(char sorf, char *priv)
+{
+ u_int16_t textlen;
+ u_char *dptr;
+ token_t *t;
+
+ textlen = strlen(priv) + 1;
+ GET_TOKEN_AREA(t, dptr, sizeof(u_char) + sizeof(u_char) +
+ sizeof(u_int16_t) + textlen);
+ if (t == NULL)
+ return (NULL);
+ ADD_U_CHAR(dptr, AUT_UPRIV);
+ ADD_U_CHAR(dptr, sorf);
+ ADD_U_INT16(dptr, textlen);
+ ADD_STRING(dptr, priv, textlen);
+ return (t);
+}
+
+/*
+ * token ID 1 byte
+ * privtstrlen 2 bytes
+ * privtstr N bytes + 1
+ * privstrlen 2 bytes
+ * privstr N bytes + 1
+ */
+token_t *
+au_to_privset(char *privtypestr, char *privstr)
+{
+ u_int16_t type_len, priv_len;
+ u_char *dptr;
+ token_t *t;
+
+ type_len = strlen(privtypestr) + 1;
+ priv_len = strlen(privstr) + 1;
+ GET_TOKEN_AREA(t, dptr, sizeof(u_char) + sizeof(u_int16_t) +
+ sizeof(u_int16_t) + type_len + priv_len);
+ if (t == NULL)
+ return (NULL);
+ ADD_U_CHAR(dptr, AUT_PRIV);
+ ADD_U_INT16(dptr, type_len);
+ ADD_STRING(dptr, privtypestr, type_len);
+ ADD_U_INT16(dptr, priv_len);
+ ADD_STRING(dptr, privstr, priv_len);
+ return (t);
+}
+
+/*
+ * token ID 1 byte
+ * argument # 1 byte
+ * argument value 4 bytes/8 bytes (32-bit/64-bit value)
+ * text length 2 bytes
+ * text N bytes + 1 terminating NULL byte
+ */
+token_t *
+au_to_arg32(char n, const char *text, u_int32_t v)
+{
+ token_t *t;
+ u_char *dptr = NULL;
+ u_int16_t textlen;
+
+ textlen = strlen(text);
+ textlen += 1;
+
+ GET_TOKEN_AREA(t, dptr, 2 * sizeof(u_char) + sizeof(u_int32_t) +
+ sizeof(u_int16_t) + textlen);
+ if (t == NULL)
+ return (NULL);
+
+ ADD_U_CHAR(dptr, AUT_ARG32);
+ ADD_U_CHAR(dptr, n);
+ ADD_U_INT32(dptr, v);
+ ADD_U_INT16(dptr, textlen);
+ ADD_STRING(dptr, text, textlen);
+
+ return (t);
+}
+
+token_t *
+au_to_arg64(char n, const char *text, u_int64_t v)
+{
+ token_t *t;
+ u_char *dptr = NULL;
+ u_int16_t textlen;
+
+ textlen = strlen(text);
+ textlen += 1;
+
+ GET_TOKEN_AREA(t, dptr, 2 * sizeof(u_char) + sizeof(u_int64_t) +
+ sizeof(u_int16_t) + textlen);
+ if (t == NULL)
+ return (NULL);
+
+ ADD_U_CHAR(dptr, AUT_ARG64);
+ ADD_U_CHAR(dptr, n);
+ ADD_U_INT64(dptr, v);
+ ADD_U_INT16(dptr, textlen);
+ ADD_STRING(dptr, text, textlen);
+
+ return (t);
+}
+
+token_t *
+au_to_arg(char n, const char *text, u_int32_t v)
+{
+
+ return (au_to_arg32(n, text, v));
+}
+
+#if defined(_KERNEL) || defined(KERNEL)
+/*
+ * token ID 1 byte
+ * file access mode 4 bytes
+ * owner user ID 4 bytes
+ * owner group ID 4 bytes
+ * file system ID 4 bytes
+ * node ID 8 bytes
+ * device 4 bytes/8 bytes (32-bit/64-bit)
+ */
+token_t *
+au_to_attr32(struct vnode_au_info *vni)
+{
+ token_t *t;
+ u_char *dptr = NULL;
+ u_int16_t pad0_16 = 0;
+ u_int32_t pad0_32 = 0;
+
+ GET_TOKEN_AREA(t, dptr, sizeof(u_char) + 2 * sizeof(u_int16_t) +
+ 3 * sizeof(u_int32_t) + sizeof(u_int64_t) + sizeof(u_int32_t));
+ if (t == NULL)
+ return (NULL);
+
+ ADD_U_CHAR(dptr, AUT_ATTR32);
+
+ /*
+ * BSD defines the size for the file mode as 2 bytes; BSM defines 4
+ * so pad with 0.
+ *
+ * XXXRW: Possibly should be conditionally compiled.
+ *
+ * XXXRW: Should any conversions take place on the mode?
+ */
+ ADD_U_INT16(dptr, pad0_16);
+ ADD_U_INT16(dptr, vni->vn_mode);
+
+ ADD_U_INT32(dptr, vni->vn_uid);
+ ADD_U_INT32(dptr, vni->vn_gid);
+ ADD_U_INT32(dptr, vni->vn_fsid);
+
+ /*
+ * Some systems use 32-bit file ID's, others use 64-bit file IDs.
+ * Attempt to handle both, and let the compiler sort it out. If we
+ * could pick this out at compile-time, it would be better, so as to
+ * avoid the else case below.
+ */
+ if (sizeof(vni->vn_fileid) == sizeof(uint32_t)) {
+ ADD_U_INT32(dptr, pad0_32);
+ ADD_U_INT32(dptr, vni->vn_fileid);
+ } else if (sizeof(vni->vn_fileid) == sizeof(uint64_t))
+ ADD_U_INT64(dptr, vni->vn_fileid);
+ else
+ ADD_U_INT64(dptr, 0LL);
+
+ ADD_U_INT32(dptr, vni->vn_dev);
+
+ return (t);
+}
+
+token_t *
+au_to_attr64(struct vnode_au_info *vni)
+{
+ token_t *t;
+ u_char *dptr = NULL;
+ u_int16_t pad0_16 = 0;
+ u_int32_t pad0_32 = 0;
+
+ GET_TOKEN_AREA(t, dptr, sizeof(u_char) + 2 * sizeof(u_int16_t) +
+ 3 * sizeof(u_int32_t) + sizeof(u_int64_t) * 2);
+ if (t == NULL)
+ return (NULL);
+
+ ADD_U_CHAR(dptr, AUT_ATTR64);
+
+ /*
+ * BSD defines the size for the file mode as 2 bytes; BSM defines 4
+ * so pad with 0.
+ *
+ * XXXRW: Possibly should be conditionally compiled.
+ *
+ * XXXRW: Should any conversions take place on the mode?
+ */
+ ADD_U_INT16(dptr, pad0_16);
+ ADD_U_INT16(dptr, vni->vn_mode);
+
+ ADD_U_INT32(dptr, vni->vn_uid);
+ ADD_U_INT32(dptr, vni->vn_gid);
+ ADD_U_INT32(dptr, vni->vn_fsid);
+
+ /*
+ * Some systems use 32-bit file ID's, other's use 64-bit file IDs.
+ * Attempt to handle both, and let the compiler sort it out. If we
+ * could pick this out at compile-time, it would be better, so as to
+ * avoid the else case below.
+ */
+ if (sizeof(vni->vn_fileid) == sizeof(uint32_t)) {
+ ADD_U_INT32(dptr, pad0_32);
+ ADD_U_INT32(dptr, vni->vn_fileid);
+ } else if (sizeof(vni->vn_fileid) == sizeof(uint64_t))
+ ADD_U_INT64(dptr, vni->vn_fileid);
+ else
+ ADD_U_INT64(dptr, 0LL);
+
+ ADD_U_INT64(dptr, vni->vn_dev);
+
+ return (t);
+}
+
+token_t *
+au_to_attr(struct vnode_au_info *vni)
+{
+
+ return (au_to_attr32(vni));
+}
+#endif /* !(defined(_KERNEL) || defined(KERNEL) */
+
+/*
+ * token ID 1 byte
+ * how to print 1 byte
+ * basic unit 1 byte
+ * unit count 1 byte
+ * data items (depends on basic unit)
+ */
+token_t *
+au_to_data(char unit_print, char unit_type, char unit_count, const char *p)
+{
+ token_t *t;
+ u_char *dptr = NULL;
+ size_t datasize, totdata;
+
+ /* Determine the size of the basic unit. */
+ switch (unit_type) {
+ case AUR_BYTE:
+ /* case AUR_CHAR: */
+ datasize = AUR_BYTE_SIZE;
+ break;
+
+ case AUR_SHORT:
+ datasize = AUR_SHORT_SIZE;
+ break;
+
+ case AUR_INT32:
+ /* case AUR_INT: */
+ datasize = AUR_INT32_SIZE;
+ break;
+
+ case AUR_INT64:
+ datasize = AUR_INT64_SIZE;
+ break;
+
+ default:
+ errno = EINVAL;
+ return (NULL);
+ }
+
+ totdata = datasize * unit_count;
+
+ GET_TOKEN_AREA(t, dptr, 4 * sizeof(u_char) + totdata);
+ if (t == NULL)
+ return (NULL);
+
+ /*
+ * XXXRW: We should be byte-swapping each data item for multi-byte
+ * types.
+ */
+ ADD_U_CHAR(dptr, AUT_DATA);
+ ADD_U_CHAR(dptr, unit_print);
+ ADD_U_CHAR(dptr, unit_type);
+ ADD_U_CHAR(dptr, unit_count);
+ ADD_MEM(dptr, p, totdata);
+
+ return (t);
+}
+
+
+/*
+ * token ID 1 byte
+ * status 4 bytes
+ * return value 4 bytes
+ */
+token_t *
+au_to_exit(int retval, int err)
+{
+ token_t *t;
+ u_char *dptr = NULL;
+
+ GET_TOKEN_AREA(t, dptr, sizeof(u_char) + 2 * sizeof(u_int32_t));
+ if (t == NULL)
+ return (NULL);
+
+ ADD_U_CHAR(dptr, AUT_EXIT);
+ ADD_U_INT32(dptr, err);
+ ADD_U_INT32(dptr, retval);
+
+ return (t);
+}
+
+/*
+ */
+token_t *
+au_to_groups(int *groups)
+{
+
+ return (au_to_newgroups(AUDIT_MAX_GROUPS, (gid_t *)groups));
+}
+
+/*
+ * token ID 1 byte
+ * number groups 2 bytes
+ * group list count * 4 bytes
+ */
+token_t *
+au_to_newgroups(u_int16_t n, gid_t *groups)
+{
+ token_t *t;
+ u_char *dptr = NULL;
+ int i;
+
+ GET_TOKEN_AREA(t, dptr, sizeof(u_char) + sizeof(u_int16_t) +
+ n * sizeof(u_int32_t));
+ if (t == NULL)
+ return (NULL);
+
+ ADD_U_CHAR(dptr, AUT_NEWGROUPS);
+ ADD_U_INT16(dptr, n);
+ for (i = 0; i < n; i++)
+ ADD_U_INT32(dptr, groups[i]);
+
+ return (t);
+}
+
+/*
+ * token ID 1 byte
+ * internet address 4 bytes
+ */
+token_t *
+au_to_in_addr(struct in_addr *internet_addr)
+{
+ token_t *t;
+ u_char *dptr = NULL;
+
+ GET_TOKEN_AREA(t, dptr, sizeof(u_char) + sizeof(uint32_t));
+ if (t == NULL)
+ return (NULL);
+
+ ADD_U_CHAR(dptr, AUT_IN_ADDR);
+ ADD_MEM(dptr, &internet_addr->s_addr, sizeof(uint32_t));
+
+ return (t);
+}
+
+/*
+ * token ID 1 byte
+ * address type/length 4 bytes
+ * address 16 bytes
+ */
+token_t *
+au_to_in_addr_ex(struct in6_addr *internet_addr)
+{
+ token_t *t;
+ u_char *dptr = NULL;
+ u_int32_t type = AU_IPv6;
+
+ GET_TOKEN_AREA(t, dptr, sizeof(u_char) + 5 * sizeof(uint32_t));
+ if (t == NULL)
+ return (NULL);
+
+ ADD_U_CHAR(dptr, AUT_IN_ADDR_EX);
+ ADD_U_INT32(dptr, type);
+ ADD_MEM(dptr, internet_addr, 4 * sizeof(uint32_t));
+
+ return (t);
+}
+
+/*
+ * token ID 1 byte
+ * ip header 20 bytes
+ *
+ * The IP header should be submitted in network byte order.
+ */
+token_t *
+au_to_ip(struct ip *ip)
+{
+ token_t *t;
+ u_char *dptr = NULL;
+
+ GET_TOKEN_AREA(t, dptr, sizeof(u_char) + sizeof(struct ip));
+ if (t == NULL)
+ return (NULL);
+
+ ADD_U_CHAR(dptr, AUT_IP);
+ ADD_MEM(dptr, ip, sizeof(struct ip));
+
+ return (t);
+}
+
+/*
+ * token ID 1 byte
+ * object ID type 1 byte
+ * object ID 4 bytes
+ */
+token_t *
+au_to_ipc(char type, int id)
+{
+ token_t *t;
+ u_char *dptr = NULL;
+
+ GET_TOKEN_AREA(t, dptr, 2 * sizeof(u_char) + sizeof(u_int32_t));
+ if (t == NULL)
+ return (NULL);
+
+ ADD_U_CHAR(dptr, AUT_IPC);
+ ADD_U_CHAR(dptr, type);
+ ADD_U_INT32(dptr, id);
+
+ return (t);
+}
+
+/*
+ * token ID 1 byte
+ * owner user ID 4 bytes
+ * owner group ID 4 bytes
+ * creator user ID 4 bytes
+ * creator group ID 4 bytes
+ * access mode 4 bytes
+ * slot sequence # 4 bytes
+ * key 4 bytes
+ */
+token_t *
+au_to_ipc_perm(struct ipc_perm *perm)
+{
+ token_t *t;
+ u_char *dptr = NULL;
+ u_int16_t pad0 = 0;
+
+ GET_TOKEN_AREA(t, dptr, sizeof(u_char) + 12 * sizeof(u_int16_t) +
+ sizeof(u_int32_t));
+ if (t == NULL)
+ return (NULL);
+
+ ADD_U_CHAR(dptr, AUT_IPC_PERM);
+
+ /*
+ * Systems vary significantly in what types they use in struct
+ * ipc_perm; at least a few still use 16-bit uid's and gid's, so
+ * allow for that, as BSM define 32-bit values here.
+ * Some systems define the sizes for ipc_perm members as 2 bytes;
+ * BSM defines 4 so pad with 0.
+ *
+ * XXXRW: Possibly shoulid be conditionally compiled, and more cases
+ * need to be handled.
+ */
+ if (sizeof(perm->uid) != sizeof(u_int32_t)) {
+ ADD_U_INT16(dptr, pad0);
+ ADD_U_INT16(dptr, perm->uid);
+ ADD_U_INT16(dptr, pad0);
+ ADD_U_INT16(dptr, perm->gid);
+ ADD_U_INT16(dptr, pad0);
+ ADD_U_INT16(dptr, perm->cuid);
+ ADD_U_INT16(dptr, pad0);
+ ADD_U_INT16(dptr, perm->cgid);
+ } else {
+ ADD_U_INT32(dptr, perm->uid);
+ ADD_U_INT32(dptr, perm->gid);
+ ADD_U_INT32(dptr, perm->cuid);
+ ADD_U_INT32(dptr, perm->cgid);
+ }
+
+ ADD_U_INT16(dptr, pad0);
+ ADD_U_INT16(dptr, perm->mode);
+
+ ADD_U_INT16(dptr, pad0);
+
+#ifdef HAVE_IPC_PERM___SEQ
+ ADD_U_INT16(dptr, perm->__seq);
+#else /* HAVE_IPC_PERM___SEQ */
+#ifdef HAVE_IPC_PERM__SEQ
+ ADD_U_INT16(dptr, perm->_seq);
+#else /* HAVE_IPC_PERM__SEQ */
+ ADD_U_INT16(dptr, perm->seq);
+#endif /* HAVE_IPC_PERM__SEQ */
+#endif /* HAVE_IPC_PERM___SEQ */
+
+#ifdef HAVE_IPC_PERM___KEY
+ ADD_U_INT32(dptr, perm->__key);
+#else /* HAVE_IPC_PERM___KEY */
+#ifdef HAVE_IPC_PERM__KEY
+ ADD_U_INT32(dptr, perm->_key);
+#else /* HAVE_IPC_PERM__KEY */
+ ADD_U_INT32(dptr, perm->key);
+#endif /* HAVE_IPC_PERM__KEY */
+#endif /* HAVE_IPC_PERM___KEY */
+
+ return (t);
+}
+
+/*
+ * token ID 1 byte
+ * port IP address 2 bytes
+ */
+token_t *
+au_to_iport(u_int16_t iport)
+{
+ token_t *t;
+ u_char *dptr = NULL;
+
+ GET_TOKEN_AREA(t, dptr, sizeof(u_char) + sizeof(u_int16_t));
+ if (t == NULL)
+ return (NULL);
+
+ ADD_U_CHAR(dptr, AUT_IPORT);
+ ADD_U_INT16(dptr, iport);
+
+ return (t);
+}
+
+/*
+ * token ID 1 byte
+ * size 2 bytes
+ * data size bytes
+ */
+token_t *
+au_to_opaque(const char *data, u_int16_t bytes)
+{
+ token_t *t;
+ u_char *dptr = NULL;
+
+ GET_TOKEN_AREA(t, dptr, sizeof(u_char) + sizeof(u_int16_t) + bytes);
+ if (t == NULL)
+ return (NULL);
+
+ ADD_U_CHAR(dptr, AUT_OPAQUE);
+ ADD_U_INT16(dptr, bytes);
+ ADD_MEM(dptr, data, bytes);
+
+ return (t);
+}
+
+/*
+ * token ID 1 byte
+ * seconds of time 4 bytes
+ * milliseconds of time 4 bytes
+ * file name len 2 bytes
+ * file pathname N bytes + 1 terminating NULL byte
+ */
+token_t *
+au_to_file(const char *file, struct timeval tm)
+{
+ token_t *t;
+ u_char *dptr = NULL;
+ u_int16_t filelen;
+ u_int32_t timems;
+
+ filelen = strlen(file);
+ filelen += 1;
+
+ GET_TOKEN_AREA(t, dptr, sizeof(u_char) + 2 * sizeof(u_int32_t) +
+ sizeof(u_int16_t) + filelen);
+ if (t == NULL)
+ return (NULL);
+
+ timems = tm.tv_usec/1000;
+
+ ADD_U_CHAR(dptr, AUT_OTHER_FILE32);
+ ADD_U_INT32(dptr, tm.tv_sec);
+ ADD_U_INT32(dptr, timems); /* We need time in ms. */
+ ADD_U_INT16(dptr, filelen);
+ ADD_STRING(dptr, file, filelen);
+
+ return (t);
+}
+
+/*
+ * token ID 1 byte
+ * text length 2 bytes
+ * text N bytes + 1 terminating NULL byte
+ */
+token_t *
+au_to_text(const char *text)
+{
+ token_t *t;
+ u_char *dptr = NULL;
+ u_int16_t textlen;
+
+ textlen = strlen(text);
+ textlen += 1;
+
+ /* XXXRW: Should validate length against token size limit. */
+
+ GET_TOKEN_AREA(t, dptr, sizeof(u_char) + sizeof(u_int16_t) + textlen);
+ if (t == NULL)
+ return (NULL);
+
+ ADD_U_CHAR(dptr, AUT_TEXT);
+ ADD_U_INT16(dptr, textlen);
+ ADD_STRING(dptr, text, textlen);
+
+ return (t);
+}
+
+/*
+ * token ID 1 byte
+ * path length 2 bytes
+ * path N bytes + 1 terminating NULL byte
+ */
+token_t *
+au_to_path(const char *text)
+{
+ token_t *t;
+ u_char *dptr = NULL;
+ u_int16_t textlen;
+
+ textlen = strlen(text);
+ textlen += 1;
+
+ GET_TOKEN_AREA(t, dptr, sizeof(u_char) + sizeof(u_int16_t) + textlen);
+ if (t == NULL)
+ return (NULL);
+
+ ADD_U_CHAR(dptr, AUT_PATH);
+ ADD_U_INT16(dptr, textlen);
+ ADD_STRING(dptr, text, textlen);
+
+ return (t);
+}
+
+/*
+ * token ID 1 byte
+ * audit ID 4 bytes
+ * effective user ID 4 bytes
+ * effective group ID 4 bytes
+ * real user ID 4 bytes
+ * real group ID 4 bytes
+ * process ID 4 bytes
+ * session ID 4 bytes
+ * terminal ID
+ * port ID 4 bytes/8 bytes (32-bit/64-bit value)
+ * machine address 4 bytes
+ */
+token_t *
+au_to_process32(au_id_t auid, uid_t euid, gid_t egid, uid_t ruid, gid_t rgid,
+ pid_t pid, au_asid_t sid, au_tid_t *tid)
+{
+ token_t *t;
+ u_char *dptr = NULL;
+
+ GET_TOKEN_AREA(t, dptr, sizeof(u_char) + 9 * sizeof(u_int32_t));
+ if (t == NULL)
+ return (NULL);
+
+ ADD_U_CHAR(dptr, AUT_PROCESS32);
+ ADD_U_INT32(dptr, auid);
+ ADD_U_INT32(dptr, euid);
+ ADD_U_INT32(dptr, egid);
+ ADD_U_INT32(dptr, ruid);
+ ADD_U_INT32(dptr, rgid);
+ ADD_U_INT32(dptr, pid);
+ ADD_U_INT32(dptr, sid);
+ ADD_U_INT32(dptr, tid->port);
+
+ /*
+ * Note: Solaris will write out IPv6 addresses here as a 32-bit
+ * address type and 16 bytes of address, but for IPv4 addresses it
+ * simply writes the 4-byte address directly. We support only IPv4
+ * addresses for process32 tokens.
+ */
+ ADD_MEM(dptr, &tid->machine, sizeof(u_int32_t));
+
+ return (t);
+}
+
+token_t *
+au_to_process64(au_id_t auid, uid_t euid, gid_t egid, uid_t ruid, gid_t rgid,
+ pid_t pid, au_asid_t sid, au_tid_t *tid)
+{
+ token_t *t;
+ u_char *dptr = NULL;
+
+ GET_TOKEN_AREA(t, dptr, sizeof(u_char) + 8 * sizeof(u_int32_t) +
+ sizeof(u_int64_t));
+ if (t == NULL)
+ return (NULL);
+
+ ADD_U_CHAR(dptr, AUT_PROCESS64);
+ ADD_U_INT32(dptr, auid);
+ ADD_U_INT32(dptr, euid);
+ ADD_U_INT32(dptr, egid);
+ ADD_U_INT32(dptr, ruid);
+ ADD_U_INT32(dptr, rgid);
+ ADD_U_INT32(dptr, pid);
+ ADD_U_INT32(dptr, sid);
+ ADD_U_INT64(dptr, tid->port);
+
+ /*
+ * Note: Solaris will write out IPv6 addresses here as a 32-bit
+ * address type and 16 bytes of address, but for IPv4 addresses it
+ * simply writes the 4-byte address directly. We support only IPv4
+ * addresses for process64 tokens.
+ */
+ ADD_MEM(dptr, &tid->machine, sizeof(u_int32_t));
+
+ return (t);
+}
+
+token_t *
+au_to_process(au_id_t auid, uid_t euid, gid_t egid, uid_t ruid, gid_t rgid,
+ pid_t pid, au_asid_t sid, au_tid_t *tid)
+{
+
+ return (au_to_process32(auid, euid, egid, ruid, rgid, pid, sid,
+ tid));
+}
+
+/*
+ * token ID 1 byte
+ * audit ID 4 bytes
+ * effective user ID 4 bytes
+ * effective group ID 4 bytes
+ * real user ID 4 bytes
+ * real group ID 4 bytes
+ * process ID 4 bytes
+ * session ID 4 bytes
+ * terminal ID
+ * port ID 4 bytes/8 bytes (32-bit/64-bit value)
+ * address type-len 4 bytes
+ * machine address 16 bytes
+ */
+token_t *
+au_to_process32_ex(au_id_t auid, uid_t euid, gid_t egid, uid_t ruid,
+ gid_t rgid, pid_t pid, au_asid_t sid, au_tid_addr_t *tid)
+{
+ token_t *t;
+ u_char *dptr = NULL;
+
+ if (tid->at_type == AU_IPv4)
+ GET_TOKEN_AREA(t, dptr, sizeof(u_char) +
+ 10 * sizeof(u_int32_t));
+ else if (tid->at_type == AU_IPv6)
+ GET_TOKEN_AREA(t, dptr, sizeof(u_char) +
+ 13 * sizeof(u_int32_t));
+ else {
+ errno = EINVAL;
+ return (NULL);
+ }
+ if (t == NULL)
+ return (NULL);
+
+ ADD_U_CHAR(dptr, AUT_PROCESS32_EX);
+ ADD_U_INT32(dptr, auid);
+ ADD_U_INT32(dptr, euid);
+ ADD_U_INT32(dptr, egid);
+ ADD_U_INT32(dptr, ruid);
+ ADD_U_INT32(dptr, rgid);
+ ADD_U_INT32(dptr, pid);
+ ADD_U_INT32(dptr, sid);
+ ADD_U_INT32(dptr, tid->at_port);
+ ADD_U_INT32(dptr, tid->at_type);
+ ADD_MEM(dptr, &tid->at_addr[0], sizeof(u_int32_t));
+ if (tid->at_type == AU_IPv6) {
+ ADD_MEM(dptr, &tid->at_addr[1], sizeof(u_int32_t));
+ ADD_MEM(dptr, &tid->at_addr[2], sizeof(u_int32_t));
+ ADD_MEM(dptr, &tid->at_addr[3], sizeof(u_int32_t));
+ }
+
+ return (t);
+}
+
+token_t *
+au_to_process64_ex(au_id_t auid, uid_t euid, gid_t egid, uid_t ruid,
+ gid_t rgid, pid_t pid, au_asid_t sid, au_tid_addr_t *tid)
+{
+ token_t *t;
+ u_char *dptr = NULL;
+
+ if (tid->at_type == AU_IPv4)
+ GET_TOKEN_AREA(t, dptr, sizeof(u_char) +
+ 7 * sizeof(u_int32_t) + sizeof(u_int64_t) +
+ 2 * sizeof(u_int32_t));
+ else if (tid->at_type == AU_IPv6)
+ GET_TOKEN_AREA(t, dptr, sizeof(u_char) +
+ 7 * sizeof(u_int32_t) + sizeof(u_int64_t) +
+ 5 * sizeof(u_int32_t));
+ else {
+ errno = EINVAL;
+ return (NULL);
+ }
+ if (t == NULL)
+ return (NULL);
+
+ ADD_U_CHAR(dptr, AUT_PROCESS64_EX);
+ ADD_U_INT32(dptr, auid);
+ ADD_U_INT32(dptr, euid);
+ ADD_U_INT32(dptr, egid);
+ ADD_U_INT32(dptr, ruid);
+ ADD_U_INT32(dptr, rgid);
+ ADD_U_INT32(dptr, pid);
+ ADD_U_INT32(dptr, sid);
+ ADD_U_INT64(dptr, tid->at_port);
+ ADD_U_INT32(dptr, tid->at_type);
+ ADD_MEM(dptr, &tid->at_addr[0], sizeof(u_int32_t));
+ if (tid->at_type == AU_IPv6) {
+ ADD_MEM(dptr, &tid->at_addr[1], sizeof(u_int32_t));
+ ADD_MEM(dptr, &tid->at_addr[2], sizeof(u_int32_t));
+ ADD_MEM(dptr, &tid->at_addr[3], sizeof(u_int32_t));
+ }
+
+ return (t);
+}
+
+token_t *
+au_to_process_ex(au_id_t auid, uid_t euid, gid_t egid, uid_t ruid,
+ gid_t rgid, pid_t pid, au_asid_t sid, au_tid_addr_t *tid)
+{
+
+ return (au_to_process32_ex(auid, euid, egid, ruid, rgid, pid, sid,
+ tid));
+}
+
+/*
+ * token ID 1 byte
+ * error status 1 byte
+ * return value 4 bytes/8 bytes (32-bit/64-bit value)
+ */
+token_t *
+au_to_return32(char status, u_int32_t ret)
+{
+ token_t *t;
+ u_char *dptr = NULL;
+
+ GET_TOKEN_AREA(t, dptr, 2 * sizeof(u_char) + sizeof(u_int32_t));
+ if (t == NULL)
+ return (NULL);
+
+ ADD_U_CHAR(dptr, AUT_RETURN32);
+ ADD_U_CHAR(dptr, status);
+ ADD_U_INT32(dptr, ret);
+
+ return (t);
+}
+
+token_t *
+au_to_return64(char status, u_int64_t ret)
+{
+ token_t *t;
+ u_char *dptr = NULL;
+
+ GET_TOKEN_AREA(t, dptr, 2 * sizeof(u_char) + sizeof(u_int64_t));
+ if (t == NULL)
+ return (NULL);
+
+ ADD_U_CHAR(dptr, AUT_RETURN64);
+ ADD_U_CHAR(dptr, status);
+ ADD_U_INT64(dptr, ret);
+
+ return (t);
+}
+
+token_t *
+au_to_return(char status, u_int32_t ret)
+{
+
+ return (au_to_return32(status, ret));
+}
+
+/*
+ * token ID 1 byte
+ * sequence number 4 bytes
+ */
+token_t *
+au_to_seq(long audit_count)
+{
+ token_t *t;
+ u_char *dptr = NULL;
+
+ GET_TOKEN_AREA(t, dptr, sizeof(u_char) + sizeof(u_int32_t));
+ if (t == NULL)
+ return (NULL);
+
+ ADD_U_CHAR(dptr, AUT_SEQ);
+ ADD_U_INT32(dptr, audit_count);
+
+ return (t);
+}
+
+/*
+ * token ID 1 byte
+ * socket domain 2 bytes
+ * socket type 2 bytes
+ * address type 2 byte
+ * local port 2 bytes
+ * local address 4 bytes/16 bytes (IPv4/IPv6 address)
+ * remote port 2 bytes
+ * remote address 4 bytes/16 bytes (IPv4/IPv6 address)
+ *
+ * Domain and type arguments to this routine are assumed to already have been
+ * converted to the BSM constant space, so we don't do that here.
+ */
+token_t *
+au_to_socket_ex(u_short so_domain, u_short so_type,
+ struct sockaddr *sa_local, struct sockaddr *sa_remote)
+{
+ token_t *t;
+ u_char *dptr = NULL;
+ struct sockaddr_in *sin;
+ struct sockaddr_in6 *sin6;
+
+ if (so_domain == AF_INET)
+ GET_TOKEN_AREA(t, dptr, sizeof(u_char) +
+ 5 * sizeof(u_int16_t) + 2 * sizeof(u_int32_t));
+ else if (so_domain == AF_INET6)
+ GET_TOKEN_AREA(t, dptr, sizeof(u_char) +
+ 5 * sizeof(u_int16_t) + 8 * sizeof(u_int32_t));
+ else {
+ errno = EINVAL;
+ return (NULL);
+ }
+ if (t == NULL)
+ return (NULL);
+
+ ADD_U_CHAR(dptr, AUT_SOCKET_EX);
+ ADD_U_INT16(dptr, au_domain_to_bsm(so_domain));
+ ADD_U_INT16(dptr, au_socket_type_to_bsm(so_type));
+ if (so_domain == AF_INET) {
+ ADD_U_INT16(dptr, AU_IPv4);
+ sin = (struct sockaddr_in *)sa_local;
+ ADD_MEM(dptr, &sin->sin_port, sizeof(uint16_t));
+ ADD_MEM(dptr, &sin->sin_addr.s_addr, sizeof(uint32_t));
+ sin = (struct sockaddr_in *)sa_remote;
+ ADD_MEM(dptr, &sin->sin_port, sizeof(uint16_t));
+ ADD_MEM(dptr, &sin->sin_addr.s_addr, sizeof(uint32_t));
+ } else {
+ ADD_U_INT16(dptr, AU_IPv6);
+ sin6 = (struct sockaddr_in6 *)sa_local;
+ ADD_MEM(dptr, &sin6->sin6_port, sizeof(uint16_t));
+ ADD_MEM(dptr, &sin6->sin6_addr, 4 * sizeof(uint32_t));
+ sin6 = (struct sockaddr_in6 *)sa_remote;
+ ADD_MEM(dptr, &sin6->sin6_port, sizeof(uint16_t));
+ ADD_MEM(dptr, &sin6->sin6_addr, 4 * sizeof(uint32_t));
+ }
+
+ return (t);
+}
+
+/*
+ * token ID 1 byte
+ * socket family 2 bytes
+ * path (up to) 104 bytes + NULL (NULL terminated string)
+ */
+token_t *
+au_to_sock_unix(struct sockaddr_un *so)
+{
+ token_t *t;
+ u_char *dptr;
+
+ GET_TOKEN_AREA(t, dptr, 3 * sizeof(u_char) + strlen(so->sun_path) + 1);
+ if (t == NULL)
+ return (NULL);
+
+ ADD_U_CHAR(dptr, AUT_SOCKUNIX);
+ /* BSM token has two bytes for family */
+ ADD_U_CHAR(dptr, 0);
+ ADD_U_CHAR(dptr, so->sun_family);
+ ADD_STRING(dptr, so->sun_path, strlen(so->sun_path) + 1);
+
+ return (t);
+}
+
+/*
+ * token ID 1 byte
+ * socket family 2 bytes
+ * local port 2 bytes
+ * socket address 4 bytes
+ */
+token_t *
+au_to_sock_inet32(struct sockaddr_in *so)
+{
+ token_t *t;
+ u_char *dptr = NULL;
+ uint16_t family;
+
+ GET_TOKEN_AREA(t, dptr, sizeof(u_char) + 2 * sizeof(uint16_t) +
+ sizeof(uint32_t));
+ if (t == NULL)
+ return (NULL);
+
+ ADD_U_CHAR(dptr, AUT_SOCKINET32);
+ /*
+ * BSM defines the family field as 16 bits, but many operating
+ * systems have an 8-bit sin_family field. Extend to 16 bits before
+ * writing into the token. Assume that both the port and the address
+ * in the sockaddr_in are already in network byte order, but family
+ * is in local byte order.
+ *
+ * XXXRW: Should a name space conversion be taking place on the value
+ * of sin_family?
+ */
+ family = so->sin_family;
+ ADD_U_INT16(dptr, family);
+ ADD_MEM(dptr, &so->sin_port, sizeof(uint16_t));
+ ADD_MEM(dptr, &so->sin_addr.s_addr, sizeof(uint32_t));
+
+ return (t);
+}
+
+token_t *
+au_to_sock_inet128(struct sockaddr_in6 *so)
+{
+ token_t *t;
+ u_char *dptr = NULL;
+
+ GET_TOKEN_AREA(t, dptr, 3 * sizeof(u_char) + sizeof(u_int16_t) +
+ 4 * sizeof(u_int32_t));
+ if (t == NULL)
+ return (NULL);
+
+ ADD_U_CHAR(dptr, AUT_SOCKINET128);
+ /*
+ * In BSD, sin6_family is one octet, but BSM defines the token to
+ * store two. So we copy in a 0 first. XXXRW: Possibly should be
+ * conditionally compiled.
+ */
+ ADD_U_CHAR(dptr, 0);
+ ADD_U_CHAR(dptr, so->sin6_family);
+
+ ADD_U_INT16(dptr, so->sin6_port);
+ ADD_MEM(dptr, &so->sin6_addr, 4 * sizeof(uint32_t));
+
+ return (t);
+}
+
+token_t *
+au_to_sock_inet(struct sockaddr_in *so)
+{
+
+ return (au_to_sock_inet32(so));
+}
+
+/*
+ * token ID 1 byte
+ * audit ID 4 bytes
+ * effective user ID 4 bytes
+ * effective group ID 4 bytes
+ * real user ID 4 bytes
+ * real group ID 4 bytes
+ * process ID 4 bytes
+ * session ID 4 bytes
+ * terminal ID
+ * port ID 4 bytes/8 bytes (32-bit/64-bit value)
+ * machine address 4 bytes
+ */
+token_t *
+au_to_subject32(au_id_t auid, uid_t euid, gid_t egid, uid_t ruid, gid_t rgid,
+ pid_t pid, au_asid_t sid, au_tid_t *tid)
+{
+ token_t *t;
+ u_char *dptr = NULL;
+
+ GET_TOKEN_AREA(t, dptr, sizeof(u_char) + 9 * sizeof(u_int32_t));
+ if (t == NULL)
+ return (NULL);
+
+ ADD_U_CHAR(dptr, AUT_SUBJECT32);
+ ADD_U_INT32(dptr, auid);
+ ADD_U_INT32(dptr, euid);
+ ADD_U_INT32(dptr, egid);
+ ADD_U_INT32(dptr, ruid);
+ ADD_U_INT32(dptr, rgid);
+ ADD_U_INT32(dptr, pid);
+ ADD_U_INT32(dptr, sid);
+ ADD_U_INT32(dptr, tid->port);
+ ADD_MEM(dptr, &tid->machine, sizeof(u_int32_t));
+
+ return (t);
+}
+
+token_t *
+au_to_subject64(au_id_t auid, uid_t euid, gid_t egid, uid_t ruid, gid_t rgid,
+ pid_t pid, au_asid_t sid, au_tid_t *tid)
+{
+ token_t *t;
+ u_char *dptr = NULL;
+
+ GET_TOKEN_AREA(t, dptr, sizeof(u_char) + 7 * sizeof(u_int32_t) +
+ sizeof(u_int64_t) + sizeof(u_int32_t));
+ if (t == NULL)
+ return (NULL);
+
+ ADD_U_CHAR(dptr, AUT_SUBJECT64);
+ ADD_U_INT32(dptr, auid);
+ ADD_U_INT32(dptr, euid);
+ ADD_U_INT32(dptr, egid);
+ ADD_U_INT32(dptr, ruid);
+ ADD_U_INT32(dptr, rgid);
+ ADD_U_INT32(dptr, pid);
+ ADD_U_INT32(dptr, sid);
+ ADD_U_INT64(dptr, tid->port);
+ ADD_MEM(dptr, &tid->machine, sizeof(u_int32_t));
+
+ return (t);
+}
+
+token_t *
+au_to_subject(au_id_t auid, uid_t euid, gid_t egid, uid_t ruid, gid_t rgid,
+ pid_t pid, au_asid_t sid, au_tid_t *tid)
+{
+
+ return (au_to_subject32(auid, euid, egid, ruid, rgid, pid, sid,
+ tid));
+}
+
+/*
+ * token ID 1 byte
+ * audit ID 4 bytes
+ * effective user ID 4 bytes
+ * effective group ID 4 bytes
+ * real user ID 4 bytes
+ * real group ID 4 bytes
+ * process ID 4 bytes
+ * session ID 4 bytes
+ * terminal ID
+ * port ID 4 bytes/8 bytes (32-bit/64-bit value)
+ * address type/length 4 bytes
+ * machine address 16 bytes
+ */
+token_t *
+au_to_subject32_ex(au_id_t auid, uid_t euid, gid_t egid, uid_t ruid,
+ gid_t rgid, pid_t pid, au_asid_t sid, au_tid_addr_t *tid)
+{
+ token_t *t;
+ u_char *dptr = NULL;
+
+ if (tid->at_type == AU_IPv4)
+ GET_TOKEN_AREA(t, dptr, sizeof(u_char) + 10 *
+ sizeof(u_int32_t));
+ else if (tid->at_type == AU_IPv6)
+ GET_TOKEN_AREA(t, dptr, sizeof(u_char) + 13 *
+ sizeof(u_int32_t));
+ else {
+ errno = EINVAL;
+ return (NULL);
+ }
+ if (t == NULL)
+ return (NULL);
+
+ ADD_U_CHAR(dptr, AUT_SUBJECT32_EX);
+ ADD_U_INT32(dptr, auid);
+ ADD_U_INT32(dptr, euid);
+ ADD_U_INT32(dptr, egid);
+ ADD_U_INT32(dptr, ruid);
+ ADD_U_INT32(dptr, rgid);
+ ADD_U_INT32(dptr, pid);
+ ADD_U_INT32(dptr, sid);
+ ADD_U_INT32(dptr, tid->at_port);
+ ADD_U_INT32(dptr, tid->at_type);
+ if (tid->at_type == AU_IPv6)
+ ADD_MEM(dptr, &tid->at_addr[0], 4 * sizeof(u_int32_t));
+ else
+ ADD_MEM(dptr, &tid->at_addr[0], sizeof(u_int32_t));
+
+ return (t);
+}
+
+token_t *
+au_to_subject64_ex(au_id_t auid, uid_t euid, gid_t egid, uid_t ruid,
+ gid_t rgid, pid_t pid, au_asid_t sid, au_tid_addr_t *tid)
+{
+ token_t *t;
+ u_char *dptr = NULL;
+
+ if (tid->at_type == AU_IPv4)
+ GET_TOKEN_AREA(t, dptr, sizeof(u_char) +
+ 7 * sizeof(u_int32_t) + sizeof(u_int64_t) +
+ 2 * sizeof(u_int32_t));
+ else if (tid->at_type == AU_IPv6)
+ GET_TOKEN_AREA(t, dptr, sizeof(u_char) +
+ 7 * sizeof(u_int32_t) + sizeof(u_int64_t) +
+ 5 * sizeof(u_int32_t));
+ else {
+ errno = EINVAL;
+ return (NULL);
+ }
+ if (t == NULL)
+ return (NULL);
+
+ ADD_U_CHAR(dptr, AUT_SUBJECT64_EX);
+ ADD_U_INT32(dptr, auid);
+ ADD_U_INT32(dptr, euid);
+ ADD_U_INT32(dptr, egid);
+ ADD_U_INT32(dptr, ruid);
+ ADD_U_INT32(dptr, rgid);
+ ADD_U_INT32(dptr, pid);
+ ADD_U_INT32(dptr, sid);
+ ADD_U_INT64(dptr, tid->at_port);
+ ADD_U_INT32(dptr, tid->at_type);
+ if (tid->at_type == AU_IPv6)
+ ADD_MEM(dptr, &tid->at_addr[0], 4 * sizeof(u_int32_t));
+ else
+ ADD_MEM(dptr, &tid->at_addr[0], sizeof(u_int32_t));
+
+ return (t);
+}
+
+token_t *
+au_to_subject_ex(au_id_t auid, uid_t euid, gid_t egid, uid_t ruid,
+ gid_t rgid, pid_t pid, au_asid_t sid, au_tid_addr_t *tid)
+{
+
+ return (au_to_subject32_ex(auid, euid, egid, ruid, rgid, pid, sid,
+ tid));
+}
+
+#if !defined(_KERNEL) && !defined(KERNEL) && defined(HAVE_AUDIT_SYSCALLS)
+/*
+ * Collects audit information for the current process and creates a subject
+ * token from it.
+ */
+token_t *
+au_to_me(void)
+{
+ auditinfo_t auinfo;
+ auditinfo_addr_t aia;
+
+ /*
+ * Try to use getaudit_addr(2) first. If this kernel does not support
+ * it, then fall back on to getaudit(2).
+ */
+ if (getaudit_addr(&aia, sizeof(aia)) != 0) {
+ if (errno == ENOSYS) {
+ if (getaudit(&auinfo) != 0)
+ return (NULL);
+ return (au_to_subject32(auinfo.ai_auid, geteuid(),
+ getegid(), getuid(), getgid(), getpid(),
+ auinfo.ai_asid, &auinfo.ai_termid));
+ } else {
+ /* getaudit_addr(2) failed for some other reason. */
+ return (NULL);
+ }
+ }
+
+ return (au_to_subject32_ex(aia.ai_auid, geteuid(), getegid(), getuid(),
+ getgid(), getpid(), aia.ai_asid, &aia.ai_termid));
+}
+#endif
+
+/*
+ * token ID 1 byte
+ * count 4 bytes
+ * text count null-terminated strings
+ */
+token_t *
+au_to_exec_args(char **argv)
+{
+ token_t *t;
+ u_char *dptr = NULL;
+ const char *nextarg;
+ int i, count = 0;
+ size_t totlen = 0;
+
+ nextarg = *argv;
+
+ while (nextarg != NULL) {
+ int nextlen;
+
+ nextlen = strlen(nextarg);
+ totlen += nextlen + 1;
+ count++;
+ nextarg = *(argv + count);
+ }
+
+ GET_TOKEN_AREA(t, dptr, sizeof(u_char) + sizeof(u_int32_t) + totlen);
+ if (t == NULL)
+ return (NULL);
+
+ ADD_U_CHAR(dptr, AUT_EXEC_ARGS);
+ ADD_U_INT32(dptr, count);
+
+ for (i = 0; i < count; i++) {
+ nextarg = *(argv + i);
+ ADD_MEM(dptr, nextarg, strlen(nextarg) + 1);
+ }
+
+ return (t);
+}
+
+/*
+ * token ID 1 byte
+ * count 4 bytes
+ * text count null-terminated strings
+ */
+token_t *
+au_to_exec_env(char **envp)
+{
+ token_t *t;
+ u_char *dptr = NULL;
+ int i, count = 0;
+ size_t totlen = 0;
+ const char *nextenv;
+
+ nextenv = *envp;
+
+ while (nextenv != NULL) {
+ int nextlen;
+
+ nextlen = strlen(nextenv);
+ totlen += nextlen + 1;
+ count++;
+ nextenv = *(envp + count);
+ }
+
+ GET_TOKEN_AREA(t, dptr, sizeof(u_char) + sizeof(u_int32_t) + totlen);
+ if (t == NULL)
+ return (NULL);
+
+ ADD_U_CHAR(dptr, AUT_EXEC_ENV);
+ ADD_U_INT32(dptr, count);
+
+ for (i = 0; i < count; i++) {
+ nextenv = *(envp + i);
+ ADD_MEM(dptr, nextenv, strlen(nextenv) + 1);
+ }
+
+ return (t);
+}
+
+/*
+ * token ID 1 byte
+ * zonename length 2 bytes
+ * zonename N bytes + 1 terminating NULL byte
+ */
+token_t *
+au_to_zonename(const char *zonename)
+{
+ u_char *dptr = NULL;
+ u_int16_t textlen;
+ token_t *t;
+
+ textlen = strlen(zonename) + 1;
+ GET_TOKEN_AREA(t, dptr, sizeof(u_char) + sizeof(u_int16_t) + textlen);
+ if (t == NULL)
+ return (NULL);
+
+ ADD_U_CHAR(dptr, AUT_ZONENAME);
+ ADD_U_INT16(dptr, textlen);
+ ADD_STRING(dptr, zonename, textlen);
+ return (t);
+}
+
+/*
+ * token ID 1 byte
+ * record byte count 4 bytes
+ * version # 1 byte [2]
+ * event type 2 bytes
+ * event modifier 2 bytes
+ * seconds of time 4 bytes/8 bytes (32-bit/64-bit value)
+ * milliseconds of time 4 bytes/8 bytes (32-bit/64-bit value)
+ */
+token_t *
+au_to_header32_tm(int rec_size, au_event_t e_type, au_emod_t e_mod,
+ struct timeval tm)
+{
+ token_t *t;
+ u_char *dptr = NULL;
+ u_int32_t timems;
+
+ GET_TOKEN_AREA(t, dptr, sizeof(u_char) + sizeof(u_int32_t) +
+ sizeof(u_char) + 2 * sizeof(u_int16_t) + 2 * sizeof(u_int32_t));
+ if (t == NULL)
+ return (NULL);
+
+ ADD_U_CHAR(dptr, AUT_HEADER32);
+ ADD_U_INT32(dptr, rec_size);
+ ADD_U_CHAR(dptr, AUDIT_HEADER_VERSION_OPENBSM);
+ ADD_U_INT16(dptr, e_type);
+ ADD_U_INT16(dptr, e_mod);
+
+ timems = tm.tv_usec/1000;
+ /* Add the timestamp */
+ ADD_U_INT32(dptr, tm.tv_sec);
+ ADD_U_INT32(dptr, timems); /* We need time in ms. */
+
+ return (t);
+}
+
+/*
+ * token ID 1 byte
+ * record byte count 4 bytes
+ * version # 1 byte [2]
+ * event type 2 bytes
+ * event modifier 2 bytes
+ * address type/length 4 bytes
+ * machine address 4 bytes/16 bytes (IPv4/IPv6 address)
+ * seconds of time 4 bytes/8 bytes (32-bit/64-bit value)
+ * milliseconds of time 4 bytes/8 bytes (32-bit/64-bit value)
+ */
+token_t *
+au_to_header32_ex_tm(int rec_size, au_event_t e_type, au_emod_t e_mod,
+ struct timeval tm, struct auditinfo_addr *aia)
+{
+ token_t *t;
+ u_char *dptr = NULL;
+ u_int32_t timems;
+ au_tid_addr_t *tid;
+
+ tid = &aia->ai_termid;
+ if (tid->at_type != AU_IPv4 && tid->at_type != AU_IPv6)
+ return (NULL);
+ GET_TOKEN_AREA(t, dptr, sizeof(u_char) + sizeof(u_int32_t) +
+ sizeof(u_char) + 2 * sizeof(u_int16_t) + 3 *
+ sizeof(u_int32_t) + tid->at_type);
+ if (t == NULL)
+ return (NULL);
+
+ ADD_U_CHAR(dptr, AUT_HEADER32_EX);
+ ADD_U_INT32(dptr, rec_size);
+ ADD_U_CHAR(dptr, AUDIT_HEADER_VERSION_OPENBSM);
+ ADD_U_INT16(dptr, e_type);
+ ADD_U_INT16(dptr, e_mod);
+
+ ADD_U_INT32(dptr, tid->at_type);
+ if (tid->at_type == AU_IPv6)
+ ADD_MEM(dptr, &tid->at_addr[0], 4 * sizeof(u_int32_t));
+ else
+ ADD_MEM(dptr, &tid->at_addr[0], sizeof(u_int32_t));
+ timems = tm.tv_usec/1000;
+ /* Add the timestamp */
+ ADD_U_INT32(dptr, tm.tv_sec);
+ ADD_U_INT32(dptr, timems); /* We need time in ms. */
+
+ return (t);
+}
+
+token_t *
+au_to_header64_tm(int rec_size, au_event_t e_type, au_emod_t e_mod,
+ struct timeval tm)
+{
+ token_t *t;
+ u_char *dptr = NULL;
+ u_int32_t timems;
+
+ GET_TOKEN_AREA(t, dptr, sizeof(u_char) + sizeof(u_int32_t) +
+ sizeof(u_char) + 2 * sizeof(u_int16_t) + 2 * sizeof(u_int64_t));
+ if (t == NULL)
+ return (NULL);
+
+ ADD_U_CHAR(dptr, AUT_HEADER64);
+ ADD_U_INT32(dptr, rec_size);
+ ADD_U_CHAR(dptr, AUDIT_HEADER_VERSION_OPENBSM);
+ ADD_U_INT16(dptr, e_type);
+ ADD_U_INT16(dptr, e_mod);
+
+ timems = tm.tv_usec/1000;
+ /* Add the timestamp */
+ ADD_U_INT64(dptr, tm.tv_sec);
+ ADD_U_INT64(dptr, timems); /* We need time in ms. */
+
+ return (t);
+}
+
+#if !defined(KERNEL) && !defined(_KERNEL)
+#ifdef HAVE_AUDIT_SYSCALLS
+token_t *
+au_to_header32_ex(int rec_size, au_event_t e_type, au_emod_t e_mod)
+{
+ struct timeval tm;
+ struct auditinfo_addr aia;
+
+ if (gettimeofday(&tm, NULL) == -1)
+ return (NULL);
+ if (audit_get_kaudit(&aia, sizeof(aia)) != 0) {
+ if (errno != ENOSYS)
+ return (NULL);
+ return (au_to_header32_tm(rec_size, e_type, e_mod, tm));
+ }
+ return (au_to_header32_ex_tm(rec_size, e_type, e_mod, tm, &aia));
+}
+#endif /* HAVE_AUDIT_SYSCALLS */
+
+token_t *
+au_to_header32(int rec_size, au_event_t e_type, au_emod_t e_mod)
+{
+ struct timeval tm;
+
+ if (gettimeofday(&tm, NULL) == -1)
+ return (NULL);
+ return (au_to_header32_tm(rec_size, e_type, e_mod, tm));
+}
+
+token_t *
+au_to_header64(__unused int rec_size, __unused au_event_t e_type,
+ __unused au_emod_t e_mod)
+{
+ struct timeval tm;
+
+ if (gettimeofday(&tm, NULL) == -1)
+ return (NULL);
+ return (au_to_header64_tm(rec_size, e_type, e_mod, tm));
+}
+
+token_t *
+au_to_header(int rec_size, au_event_t e_type, au_emod_t e_mod)
+{
+
+ return (au_to_header32(rec_size, e_type, e_mod));
+}
+
+#ifdef HAVE_AUDIT_SYSCALLS
+token_t *
+au_to_header_ex(int rec_size, au_event_t e_type, au_emod_t e_mod)
+{
+
+ return (au_to_header32_ex(rec_size, e_type, e_mod));
+}
+#endif /* HAVE_AUDIT_SYSCALLS */
+#endif /* !defined(KERNEL) && !defined(_KERNEL) */
+
+/*
+ * token ID 1 byte
+ * trailer magic number 2 bytes
+ * record byte count 4 bytes
+ */
+token_t *
+au_to_trailer(int rec_size)
+{
+ token_t *t;
+ u_char *dptr = NULL;
+ u_int16_t magic = AUT_TRAILER_MAGIC;
+
+ GET_TOKEN_AREA(t, dptr, sizeof(u_char) + sizeof(u_int16_t) +
+ sizeof(u_int32_t));
+ if (t == NULL)
+ return (NULL);
+
+ ADD_U_CHAR(dptr, AUT_TRAILER);
+ ADD_U_INT16(dptr, magic);
+ ADD_U_INT32(dptr, rec_size);
+
+ return (t);
+}
Deleted: vendor/openbsm/1.2_alpha4/libbsm/bsm_user.c
===================================================================
--- vendor/openbsm/dist/libbsm/bsm_user.c 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/libbsm/bsm_user.c 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,268 +0,0 @@
-/*
- * Copyright (c) 2004 Apple Computer, Inc.
- * Copyright (c) 2006 Robert N. M. Watson
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. Neither the name of Apple Computer, Inc. ("Apple") nor the names of
- * its contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR
- * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
- * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- * $P4: //depot/projects/trustedbsd/openbsm/libbsm/bsm_user.c#15 $
- */
-
-#include <bsm/libbsm.h>
-
-#include <string.h>
-#include <pthread.h>
-#include <stdio.h>
-#include <stdlib.h>
-
-/*
- * Parse the contents of the audit_user file into au_user_ent structures.
- */
-
-static FILE *fp = NULL;
-static char linestr[AU_LINE_MAX];
-static const char *user_delim = ":";
-
-static pthread_mutex_t mutex = PTHREAD_MUTEX_INITIALIZER;
-
-/*
- * Parse one line from the audit_user file into the au_user_ent structure.
- */
-static struct au_user_ent *
-userfromstr(char *str, struct au_user_ent *u)
-{
- char *username, *always, *never;
- char *last;
-
- username = strtok_r(str, user_delim, &last);
- always = strtok_r(NULL, user_delim, &last);
- never = strtok_r(NULL, user_delim, &last);
-
- if ((username == NULL) || (always == NULL) || (never == NULL))
- return (NULL);
-
- if (strlen(username) >= AU_USER_NAME_MAX)
- return (NULL);
-
- strcpy(u->au_name, username);
- if (getauditflagsbin(always, &(u->au_always)) == -1)
- return (NULL);
-
- if (getauditflagsbin(never, &(u->au_never)) == -1)
- return (NULL);
-
- return (u);
-}
-
-/*
- * Rewind to beginning of the file
- */
-static void
-setauuser_locked(void)
-{
-
- if (fp != NULL)
- fseek(fp, 0, SEEK_SET);
-}
-
-void
-setauuser(void)
-{
-
- pthread_mutex_lock(&mutex);
- setauuser_locked();
- pthread_mutex_unlock(&mutex);
-}
-
-/*
- * Close the file descriptor
- */
-void
-endauuser(void)
-{
-
- pthread_mutex_lock(&mutex);
- if (fp != NULL) {
- fclose(fp);
- fp = NULL;
- }
- pthread_mutex_unlock(&mutex);
-}
-
-/*
- * Enumerate the au_user_ent structures from the file
- */
-static struct au_user_ent *
-getauuserent_r_locked(struct au_user_ent *u)
-{
- char *nl;
-
- if ((fp == NULL) && ((fp = fopen(AUDIT_USER_FILE, "r")) == NULL))
- return (NULL);
-
- while (1) {
- if (fgets(linestr, AU_LINE_MAX, fp) == NULL)
- return (NULL);
-
- /* Remove new lines. */
- if ((nl = strrchr(linestr, '\n')) != NULL)
- *nl = '\0';
-
- /* Skip comments. */
- if (linestr[0] == '#')
- continue;
-
- /* Get the next structure. */
- if (userfromstr(linestr, u) == NULL)
- return (NULL);
- break;
- }
-
- return (u);
-}
-
-struct au_user_ent *
-getauuserent_r(struct au_user_ent *u)
-{
- struct au_user_ent *up;
-
- pthread_mutex_lock(&mutex);
- up = getauuserent_r_locked(u);
- pthread_mutex_unlock(&mutex);
- return (up);
-}
-
-struct au_user_ent *
-getauuserent(void)
-{
- static char user_ent_name[AU_USER_NAME_MAX];
- static struct au_user_ent u;
-
- bzero(&u, sizeof(u));
- bzero(user_ent_name, sizeof(user_ent_name));
- u.au_name = user_ent_name;
-
- return (getauuserent_r(&u));
-}
-
-/*
- * Find a au_user_ent structure matching the given user name.
- */
-struct au_user_ent *
-getauusernam_r(struct au_user_ent *u, const char *name)
-{
- struct au_user_ent *up;
-
- if (name == NULL)
- return (NULL);
-
- pthread_mutex_lock(&mutex);
-
- setauuser_locked();
- while ((up = getauuserent_r_locked(u)) != NULL) {
- if (strcmp(name, u->au_name) == 0) {
- pthread_mutex_unlock(&mutex);
- return (u);
- }
- }
-
- pthread_mutex_unlock(&mutex);
- return (NULL);
-
-}
-
-struct au_user_ent *
-getauusernam(const char *name)
-{
- static char user_ent_name[AU_USER_NAME_MAX];
- static struct au_user_ent u;
-
- bzero(&u, sizeof(u));
- bzero(user_ent_name, sizeof(user_ent_name));
- u.au_name = user_ent_name;
-
- return (getauusernam_r(&u, name));
-}
-
-/*
- * Read the default system wide audit classes from audit_control, combine with
- * the per-user audit class and update the binary preselection mask.
- */
-int
-au_user_mask(char *username, au_mask_t *mask_p)
-{
- char auditstring[MAX_AUDITSTRING_LEN + 1];
- char user_ent_name[AU_USER_NAME_MAX];
- struct au_user_ent u, *up;
-
- bzero(&u, sizeof(u));
- bzero(user_ent_name, sizeof(user_ent_name));
- u.au_name = user_ent_name;
-
- /* Get user mask. */
- if ((up = getauusernam_r(&u, username)) != NULL) {
- if (-1 == getfauditflags(&up->au_always, &up->au_never,
- mask_p))
- return (-1);
- return (0);
- }
-
- /* Read the default system mask. */
- if (getacflg(auditstring, MAX_AUDITSTRING_LEN) == 0) {
- if (-1 == getauditflagsbin(auditstring, mask_p))
- return (-1);
- return (0);
- }
-
- /* No masks defined. */
- return (-1);
-}
-
-/*
- * Generate the process audit state by combining the audit masks passed as
- * parameters with the system audit masks.
- */
-int
-getfauditflags(au_mask_t *usremask, au_mask_t *usrdmask, au_mask_t *lastmask)
-{
- char auditstring[MAX_AUDITSTRING_LEN + 1];
-
- if ((usremask == NULL) || (usrdmask == NULL) || (lastmask == NULL))
- return (-1);
-
- lastmask->am_success = 0;
- lastmask->am_failure = 0;
-
- /* Get the system mask. */
- if (getacflg(auditstring, MAX_AUDITSTRING_LEN) == 0) {
- if (getauditflagsbin(auditstring, lastmask) != 0)
- return (-1);
- }
-
- ADDMASK(lastmask, usremask);
- SUBMASK(lastmask, usrdmask);
-
- return (0);
-}
Copied: vendor/openbsm/1.2_alpha4/libbsm/bsm_user.c (from rev 11163, vendor/openbsm/dist/libbsm/bsm_user.c)
===================================================================
--- vendor/openbsm/1.2_alpha4/libbsm/bsm_user.c (rev 0)
+++ vendor/openbsm/1.2_alpha4/libbsm/bsm_user.c 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,294 @@
+/*-
+ * Copyright (c) 2004 Apple Inc.
+ * Copyright (c) 2006 Robert N. M. Watson
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of Apple Inc. ("Apple") nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <config/config.h>
+
+#include <bsm/libbsm.h>
+
+#include <string.h>
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+#include <pthread.h>
+#endif
+#include <stdio.h>
+#include <stdlib.h>
+
+#ifndef HAVE_STRLCPY
+#include <compat/strlcpy.h>
+#endif
+
+/*
+ * Parse the contents of the audit_user file into au_user_ent structures.
+ */
+
+static FILE *fp = NULL;
+static char linestr[AU_LINE_MAX];
+static const char *user_delim = ":";
+
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+static pthread_mutex_t mutex = PTHREAD_MUTEX_INITIALIZER;
+#endif
+
+/*
+ * Parse one line from the audit_user file into the au_user_ent structure.
+ */
+static struct au_user_ent *
+userfromstr(char *str, struct au_user_ent *u)
+{
+ char *username, *always, *never;
+ char *last;
+
+ username = strtok_r(str, user_delim, &last);
+ always = strtok_r(NULL, user_delim, &last);
+ never = strtok_r(NULL, user_delim, &last);
+
+ if ((username == NULL) || (always == NULL) || (never == NULL))
+ return (NULL);
+
+ if (strlen(username) >= AU_USER_NAME_MAX)
+ return (NULL);
+
+ strlcpy(u->au_name, username, AU_USER_NAME_MAX);
+ if (getauditflagsbin(always, &(u->au_always)) == -1)
+ return (NULL);
+
+ if (getauditflagsbin(never, &(u->au_never)) == -1)
+ return (NULL);
+
+ return (u);
+}
+
+/*
+ * Rewind to beginning of the file
+ */
+static void
+setauuser_locked(void)
+{
+
+ if (fp != NULL)
+ fseek(fp, 0, SEEK_SET);
+}
+
+void
+setauuser(void)
+{
+
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+ pthread_mutex_lock(&mutex);
+#endif
+ setauuser_locked();
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+ pthread_mutex_unlock(&mutex);
+#endif
+}
+
+/*
+ * Close the file descriptor
+ */
+void
+endauuser(void)
+{
+
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+ pthread_mutex_lock(&mutex);
+#endif
+ if (fp != NULL) {
+ fclose(fp);
+ fp = NULL;
+ }
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+ pthread_mutex_unlock(&mutex);
+#endif
+}
+
+/*
+ * Enumerate the au_user_ent structures from the file
+ */
+static struct au_user_ent *
+getauuserent_r_locked(struct au_user_ent *u)
+{
+ char *nl;
+
+ if ((fp == NULL) && ((fp = fopen(AUDIT_USER_FILE, "r")) == NULL))
+ return (NULL);
+
+ while (1) {
+ if (fgets(linestr, AU_LINE_MAX, fp) == NULL)
+ return (NULL);
+
+ /* Remove new lines. */
+ if ((nl = strrchr(linestr, '\n')) != NULL)
+ *nl = '\0';
+
+ /* Skip comments. */
+ if (linestr[0] == '#')
+ continue;
+
+ /* Get the next structure. */
+ if (userfromstr(linestr, u) == NULL)
+ return (NULL);
+ break;
+ }
+
+ return (u);
+}
+
+struct au_user_ent *
+getauuserent_r(struct au_user_ent *u)
+{
+ struct au_user_ent *up;
+
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+ pthread_mutex_lock(&mutex);
+#endif
+ up = getauuserent_r_locked(u);
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+ pthread_mutex_unlock(&mutex);
+#endif
+ return (up);
+}
+
+struct au_user_ent *
+getauuserent(void)
+{
+ static char user_ent_name[AU_USER_NAME_MAX];
+ static struct au_user_ent u;
+
+ bzero(&u, sizeof(u));
+ bzero(user_ent_name, sizeof(user_ent_name));
+ u.au_name = user_ent_name;
+
+ return (getauuserent_r(&u));
+}
+
+/*
+ * Find a au_user_ent structure matching the given user name.
+ */
+struct au_user_ent *
+getauusernam_r(struct au_user_ent *u, const char *name)
+{
+ struct au_user_ent *up;
+
+ if (name == NULL)
+ return (NULL);
+
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+ pthread_mutex_lock(&mutex);
+#endif
+
+ setauuser_locked();
+ while ((up = getauuserent_r_locked(u)) != NULL) {
+ if (strcmp(name, u->au_name) == 0) {
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+ pthread_mutex_unlock(&mutex);
+#endif
+ return (up);
+ }
+ }
+
+#ifdef HAVE_PTHREAD_MUTEX_LOCK
+ pthread_mutex_unlock(&mutex);
+#endif
+ return (NULL);
+
+}
+
+struct au_user_ent *
+getauusernam(const char *name)
+{
+ static char user_ent_name[AU_USER_NAME_MAX];
+ static struct au_user_ent u;
+
+ bzero(&u, sizeof(u));
+ bzero(user_ent_name, sizeof(user_ent_name));
+ u.au_name = user_ent_name;
+
+ return (getauusernam_r(&u, name));
+}
+
+/*
+ * Read the default system wide audit classes from audit_control, combine with
+ * the per-user audit class and update the binary preselection mask.
+ */
+int
+au_user_mask(char *username, au_mask_t *mask_p)
+{
+ char auditstring[MAX_AUDITSTRING_LEN + 1];
+ char user_ent_name[AU_USER_NAME_MAX];
+ struct au_user_ent u, *up;
+
+ bzero(&u, sizeof(u));
+ bzero(user_ent_name, sizeof(user_ent_name));
+ u.au_name = user_ent_name;
+
+ /* Get user mask. */
+ if ((up = getauusernam_r(&u, username)) != NULL) {
+ if (-1 == getfauditflags(&up->au_always, &up->au_never,
+ mask_p))
+ return (-1);
+ return (0);
+ }
+
+ /* Read the default system mask. */
+ if (getacflg(auditstring, MAX_AUDITSTRING_LEN) == 0) {
+ if (-1 == getauditflagsbin(auditstring, mask_p))
+ return (-1);
+ return (0);
+ }
+
+ /* No masks defined. */
+ return (-1);
+}
+
+/*
+ * Generate the process audit state by combining the audit masks passed as
+ * parameters with the system audit masks.
+ */
+int
+getfauditflags(au_mask_t *usremask, au_mask_t *usrdmask, au_mask_t *lastmask)
+{
+ char auditstring[MAX_AUDITSTRING_LEN + 1];
+
+ if ((usremask == NULL) || (usrdmask == NULL) || (lastmask == NULL))
+ return (-1);
+
+ lastmask->am_success = 0;
+ lastmask->am_failure = 0;
+
+ /* Get the system mask. */
+ if (getacflg(auditstring, MAX_AUDITSTRING_LEN) == 0) {
+ if (getauditflagsbin(auditstring, lastmask) != 0)
+ return (-1);
+ }
+
+ ADDMASK(lastmask, usremask);
+ SUBMASK(lastmask, usrdmask);
+
+ return (0);
+}
Deleted: vendor/openbsm/1.2_alpha4/libbsm/bsm_wrappers.c
===================================================================
--- vendor/openbsm/dist/libbsm/bsm_wrappers.c 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/libbsm/bsm_wrappers.c 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,469 +0,0 @@
-/*
- * Copyright (c) 2004 Apple Computer, Inc.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. Neither the name of Apple Computer, Inc. ("Apple") nor the names of
- * its contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR
- * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
- * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- * $P4: //depot/projects/trustedbsd/openbsm/libbsm/bsm_wrappers.c#24 $
- */
-
-#ifdef __APPLE__
-#define _SYS_AUDIT_H /* Prevent include of sys/audit.h. */
-#endif
-
-#include <sys/param.h>
-#include <sys/stat.h>
-
-#ifdef __APPLE__
-#include <sys/queue.h> /* Our bsm/audit.h doesn't include queue.h. */
-#endif
-
-#include <sys/sysctl.h>
-
-#include <bsm/libbsm.h>
-
-#include <unistd.h>
-#include <syslog.h>
-#include <stdarg.h>
-#include <string.h>
-#include <errno.h>
-
-/* These are not advertised in libbsm.h */
-int audit_set_terminal_port(dev_t *p);
-int audit_set_terminal_host(uint32_t *m);
-
-/*
- * General purpose audit submission mechanism for userspace.
- */
-int
-audit_submit(short au_event, au_id_t auid, char status,
- int reterr, const char *fmt, ...)
-{
- char text[MAX_AUDITSTRING_LEN];
- token_t *token;
- long acond;
- va_list ap;
- pid_t pid;
- int error, afd, subj_ex;
- struct auditinfo ai;
- struct auditinfo_addr aia;
-
- if (auditon(A_GETCOND, &acond, sizeof(acond)) < 0) {
- /*
- * If auditon(2) returns ENOSYS, then audit has not been
- * compiled into the kernel, so just return.
- */
- if (errno == ENOSYS)
- return (0);
- error = errno;
- syslog(LOG_AUTH | LOG_ERR, "audit: auditon failed: %s",
- strerror(errno));
- errno = error;
- return (-1);
- }
- if (acond == AUC_NOAUDIT)
- return (0);
- /* XXXCSJP we should be doing a pre-select here */
- afd = au_open();
- if (afd < 0) {
- error = errno;
- syslog(LOG_AUTH | LOG_ERR, "audit: au_open failed: %s",
- strerror(errno));
- errno = error;
- return (-1);
- }
- /*
- * Some operating systems do not have getaudit_addr(2) implemented
- * yet. So we try to use getaudit(2) first, if the subject is
- * using IPv6, then we will have to try getaudit_addr(2). Failing
- * this, we return error.
- */
- subj_ex = 0;
- error = getaudit(&ai);
- if (error < 0 && errno == E2BIG) {
- error = getaudit_addr(&aia, sizeof(aia));
- if (error == 0)
- subj_ex = 1;
- }
- if (error < 0) {
- error = errno;
- syslog(LOG_AUTH | LOG_ERR, "audit: getaudit failed: %s",
- strerror(errno));
- errno = error;
- return (-1);
- }
- pid = getpid();
- if (subj_ex == 0)
- token = au_to_subject32(auid, geteuid(), getegid(),
- getuid(), getgid(), pid, pid, &ai.ai_termid);
- else
- token = au_to_subject_ex(auid, geteuid(), getegid(),
- getuid(), getgid(), pid, pid, &aia.ai_termid);
- if (token == NULL) {
- syslog(LOG_AUTH | LOG_ERR,
- "audit: unable to build subject token");
- (void) au_close(afd, AU_TO_NO_WRITE, au_event);
- errno = EPERM;
- return (-1);
- }
- if (au_write(afd, token) < 0) {
- error = errno;
- syslog(LOG_AUTH | LOG_ERR,
- "audit: au_write failed: %s", strerror(errno));
- (void) au_close(afd, AU_TO_NO_WRITE, au_event);
- errno = error;
- return (-1);
- }
- if (fmt != NULL) {
- va_start(ap, fmt);
- (void) vsnprintf(text, MAX_AUDITSTRING_LEN, fmt, ap);
- va_end(ap);
- token = au_to_text(text);
- if (token == NULL) {
- syslog(LOG_AUTH | LOG_ERR,
- "audit: failed to generate text token");
- (void) au_close(afd, AU_TO_NO_WRITE, au_event);
- errno = EPERM;
- return (-1);
- }
- if (au_write(afd, token) < 0) {
- error = errno;
- syslog(LOG_AUTH | LOG_ERR,
- "audit: au_write failed: %s", strerror(errno));
- (void) au_close(afd, AU_TO_NO_WRITE, au_event);
- errno = error;
- return (-1);
- }
- }
- token = au_to_return32(status, reterr);
- if (token == NULL) {
- syslog(LOG_AUTH | LOG_ERR,
- "audit: enable to build return token");
- (void) au_close(afd, AU_TO_NO_WRITE, au_event);
- errno = EPERM;
- return (-1);
- }
- if (au_write(afd, token) < 0) {
- error = errno;
- syslog(LOG_AUTH | LOG_ERR,
- "audit: au_write failed: %s", strerror(errno));
- (void) au_close(afd, AU_TO_NO_WRITE, au_event);
- errno = error;
- return (-1);
- }
- if (au_close(afd, AU_TO_WRITE, au_event) < 0) {
- error = errno;
- syslog(LOG_AUTH | LOG_ERR, "audit: record not committed");
- errno = error;
- return (-1);
- }
- return (0);
-}
-
-int
-audit_set_terminal_port(dev_t *p)
-{
- struct stat st;
-
- if (p == NULL)
- return (kAUBadParamErr);
-
-#ifdef NODEV
- *p = NODEV;
-#else
- *p = -1;
-#endif
-
- /* for /usr/bin/login, try fstat() first */
- if (fstat(STDIN_FILENO, &st) != 0) {
- if (errno != EBADF) {
- syslog(LOG_ERR, "fstat() failed (%s)",
- strerror(errno));
- return (kAUStatErr);
- }
- if (stat("/dev/console", &st) != 0) {
- syslog(LOG_ERR, "stat() failed (%s)",
- strerror(errno));
- return (kAUStatErr);
- }
- }
- *p = st.st_rdev;
- return (kAUNoErr);
-}
-
-int
-audit_set_terminal_host(uint32_t *m)
-{
-
-#ifdef KERN_HOSTID
- int name[2] = { CTL_KERN, KERN_HOSTID };
- size_t len;
-
- if (m == NULL)
- return (kAUBadParamErr);
- *m = 0;
- len = sizeof(*m);
- if (sysctl(name, 2, m, &len, NULL, 0) != 0) {
- syslog(LOG_ERR, "sysctl() failed (%s)", strerror(errno));
- return (kAUSysctlErr);
- }
- return (kAUNoErr);
-#else
- *m = -1;
- return (kAUNoErr);
-#endif
-}
-
-int
-audit_set_terminal_id(au_tid_t *tid)
-{
- int ret;
-
- if (tid == NULL)
- return (kAUBadParamErr);
- if ((ret = audit_set_terminal_port(&tid->port)) != kAUNoErr)
- return (ret);
- return (audit_set_terminal_host(&tid->machine));
-}
-
-/*
- * This is OK for those callers who have only one token to write. If you have
- * multiple tokens that logically form part of the same audit record, you need
- * to use the existing au_open()/au_write()/au_close() API:
- *
- * aufd = au_open();
- * tok = au_to_random_token_1(...);
- * au_write(aufd, tok);
- * tok = au_to_random_token_2(...);
- * au_write(aufd, tok);
- * ...
- * au_close(aufd, AU_TO_WRITE, AUE_your_event_type);
- *
- * Assumes, like all wrapper calls, that the caller has previously checked
- * that auditing is enabled via the audit_get_state() call.
- *
- * XXX: Should be more robust against bad arguments.
- */
-int
-audit_write(short event_code, token_t *subject, token_t *misctok, char retval,
- int errcode)
-{
- int aufd;
- char *func = "audit_write()";
- token_t *rettok;
-
- if ((aufd = au_open()) == -1) {
- au_free_token(subject);
- au_free_token(misctok);
- syslog(LOG_ERR, "%s: au_open() failed", func);
- return (kAUOpenErr);
- }
-
- /* Save subject. */
- if (subject && au_write(aufd, subject) == -1) {
- au_free_token(subject);
- au_free_token(misctok);
- (void)au_close(aufd, AU_TO_WRITE, event_code);
- syslog(LOG_ERR, "%s: write of subject failed", func);
- return (kAUWriteSubjectTokErr);
- }
-
- /* Save the event-specific token. */
- if (misctok && au_write(aufd, misctok) == -1) {
- au_free_token(misctok);
- (void)au_close(aufd, AU_TO_NO_WRITE, event_code);
- syslog(LOG_ERR, "%s: write of caller token failed", func);
- return (kAUWriteCallerTokErr);
- }
-
- /* Tokenize and save the return value. */
- if ((rettok = au_to_return32(retval, errcode)) == NULL) {
- (void)au_close(aufd, AU_TO_NO_WRITE, event_code);
- syslog(LOG_ERR, "%s: au_to_return32() failed", func);
- return (kAUMakeReturnTokErr);
- }
-
- if (au_write(aufd, rettok) == -1) {
- au_free_token(rettok);
- (void)au_close(aufd, AU_TO_NO_WRITE, event_code);
- syslog(LOG_ERR, "%s: write of return code failed", func);
- return (kAUWriteReturnTokErr);
- }
-
- /*
- * We assume the caller wouldn't have bothered with this
- * function if it hadn't already decided to keep the record.
- */
- if (au_close(aufd, AU_TO_WRITE, event_code) < 0) {
- syslog(LOG_ERR, "%s: au_close() failed", func);
- return (kAUCloseErr);
- }
-
- return (kAUNoErr);
-}
-
-/*
- * Same caveats as audit_write(). In addition, this function explicitly
- * assumes success; use audit_write_failure() on error.
- */
-int
-audit_write_success(short event_code, token_t *tok, au_id_t auid, uid_t euid,
- gid_t egid, uid_t ruid, gid_t rgid, pid_t pid, au_asid_t sid,
- au_tid_t *tid)
-{
- char *func = "audit_write_success()";
- token_t *subject = NULL;
-
- /* Tokenize and save subject. */
- subject = au_to_subject32(auid, euid, egid, ruid, rgid, pid, sid,
- tid);
- if (subject == NULL) {
- syslog(LOG_ERR, "%s: au_to_subject32() failed", func);
- return kAUMakeSubjectTokErr;
- }
-
- return (audit_write(event_code, subject, tok, 0, 0));
-}
-
-/*
- * Same caveats as audit_write(). In addition, this function explicitly
- * assumes success; use audit_write_failure_self() on error.
- */
-int
-audit_write_success_self(short event_code, token_t *tok)
-{
- token_t *subject;
- char *func = "audit_write_success_self()";
-
- if ((subject = au_to_me()) == NULL) {
- syslog(LOG_ERR, "%s: au_to_me() failed", func);
- return (kAUMakeSubjectTokErr);
- }
-
- return (audit_write(event_code, subject, tok, 0, 0));
-}
-
-/*
- * Same caveats as audit_write(). In addition, this function explicitly
- * assumes failure; use audit_write_success() otherwise.
- *
- * XXX This should let the caller pass an error return value rather than
- * hard-coding -1.
- */
-int
-audit_write_failure(short event_code, char *errmsg, int errcode, au_id_t auid,
- uid_t euid, gid_t egid, uid_t ruid, gid_t rgid, pid_t pid, au_asid_t sid,
- au_tid_t *tid)
-{
- char *func = "audit_write_failure()";
- token_t *subject, *errtok;
-
- subject = au_to_subject32(auid, euid, egid, ruid, rgid, pid, sid, tid);
- if (subject == NULL) {
- syslog(LOG_ERR, "%s: au_to_subject32() failed", func);
- return (kAUMakeSubjectTokErr);
- }
-
- /* tokenize and save the error message */
- if ((errtok = au_to_text(errmsg)) == NULL) {
- au_free_token(subject);
- syslog(LOG_ERR, "%s: au_to_text() failed", func);
- return (kAUMakeTextTokErr);
- }
-
- return (audit_write(event_code, subject, errtok, -1, errcode));
-}
-
-/*
- * Same caveats as audit_write(). In addition, this function explicitly
- * assumes failure; use audit_write_success_self() otherwise.
- *
- * XXX This should let the caller pass an error return value rather than
- * hard-coding -1.
- */
-int
-audit_write_failure_self(short event_code, char *errmsg, int errret)
-{
- char *func = "audit_write_failure_self()";
- token_t *subject, *errtok;
-
- if ((subject = au_to_me()) == NULL) {
- syslog(LOG_ERR, "%s: au_to_me() failed", func);
- return (kAUMakeSubjectTokErr);
- }
- /* tokenize and save the error message */
- if ((errtok = au_to_text(errmsg)) == NULL) {
- au_free_token(subject);
- syslog(LOG_ERR, "%s: au_to_text() failed", func);
- return (kAUMakeTextTokErr);
- }
- return (audit_write(event_code, subject, errtok, -1, errret));
-}
-
-/*
- * For auditing errors during login. Such errors are implicitly
- * non-attributable (i.e., not ascribable to any user).
- *
- * Assumes, like all wrapper calls, that the caller has previously checked
- * that auditing is enabled via the audit_get_state() call.
- */
-int
-audit_write_failure_na(short event_code, char *errmsg, int errret, uid_t euid,
- uid_t egid, pid_t pid, au_tid_t *tid)
-{
-
- return (audit_write_failure(event_code, errmsg, errret, -1, euid,
- egid, -1, -1, pid, -1, tid));
-}
-
-/* END OF au_write() WRAPPERS */
-
-#ifdef __APPLE__
-void
-audit_token_to_au32(audit_token_t atoken, uid_t *auidp, uid_t *euidp,
- gid_t *egidp, uid_t *ruidp, gid_t *rgidp, pid_t *pidp, au_asid_t *asidp,
- au_tid_t *tidp)
-{
-
- if (auidp != NULL)
- *auidp = (uid_t)atoken.val[0];
- if (euidp != NULL)
- *euidp = (uid_t)atoken.val[1];
- if (egidp != NULL)
- *egidp = (gid_t)atoken.val[2];
- if (ruidp != NULL)
- *ruidp = (uid_t)atoken.val[3];
- if (rgidp != NULL)
- *rgidp = (gid_t)atoken.val[4];
- if (pidp != NULL)
- *pidp = (pid_t)atoken.val[5];
- if (asidp != NULL)
- *asidp = (au_asid_t)atoken.val[6];
- if (tidp != NULL) {
- audit_set_terminal_host(&tidp->machine);
- tidp->port = (dev_t)atoken.val[7];
- }
-}
-#endif /* !__APPLE__ */
Copied: vendor/openbsm/1.2_alpha4/libbsm/bsm_wrappers.c (from rev 11163, vendor/openbsm/dist/libbsm/bsm_wrappers.c)
===================================================================
--- vendor/openbsm/1.2_alpha4/libbsm/bsm_wrappers.c (rev 0)
+++ vendor/openbsm/1.2_alpha4/libbsm/bsm_wrappers.c 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,821 @@
+/*-
+ * Copyright (c) 2004-2009 Apple Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of Apple Inc. ("Apple") nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifdef __APPLE__
+#define _SYS_AUDIT_H /* Prevent include of sys/audit.h. */
+#endif
+
+#include <sys/param.h>
+#include <sys/stat.h>
+
+#ifdef __APPLE__
+#include <sys/queue.h> /* Our bsm/audit.h doesn't include queue.h. */
+#endif
+
+#include <sys/sysctl.h>
+
+#include <bsm/libbsm.h>
+
+#include <unistd.h>
+#include <syslog.h>
+#include <stdarg.h>
+#include <string.h>
+#include <errno.h>
+
+/* These are not advertised in libbsm.h */
+int audit_set_terminal_port(dev_t *p);
+int audit_set_terminal_host(uint32_t *m);
+
+/*
+ * General purpose audit submission mechanism for userspace.
+ */
+int
+audit_submit(short au_event, au_id_t auid, char status,
+ int reterr, const char *fmt, ...)
+{
+ char text[MAX_AUDITSTRING_LEN];
+ token_t *token;
+ int acond;
+ va_list ap;
+ pid_t pid;
+ int error, afd, subj_ex;
+ struct auditinfo ai;
+ struct auditinfo_addr aia;
+ au_tid_t atid;
+
+ if (audit_get_cond(&acond) != 0) {
+ /*
+ * If auditon(2) returns ENOSYS, then audit has not been
+ * compiled into the kernel, so just return.
+ */
+ if (errno == ENOSYS)
+ return (0);
+ error = errno;
+ syslog(LOG_AUTH | LOG_ERR, "audit: auditon failed: %s",
+ strerror(errno));
+ errno = error;
+ return (-1);
+ }
+ if (acond == AUC_NOAUDIT)
+ return (0);
+ afd = au_open();
+ if (afd < 0) {
+ error = errno;
+ syslog(LOG_AUTH | LOG_ERR, "audit: au_open failed: %s",
+ strerror(errno));
+ errno = error;
+ return (-1);
+ }
+ /*
+ * Try to use getaudit_addr(2) first. If this kernel does not support
+ * it, then fall back on to getaudit(2).
+ */
+ subj_ex = 0;
+ error = getaudit_addr(&aia, sizeof(aia));
+ if (error < 0 && errno == ENOSYS) {
+ error = getaudit(&ai);
+ if (error < 0) {
+ error = errno;
+ syslog(LOG_AUTH | LOG_ERR, "audit: getaudit failed: %s",
+ strerror(errno));
+ errno = error;
+ return (-1);
+ }
+ /*
+ * Convert this auditinfo_t to an auditinfo_addr_t to make the
+ * following code less complicated wrt to preselection and
+ * subject token generation.
+ */
+ aia.ai_auid = ai.ai_auid;
+ aia.ai_mask = ai.ai_mask;
+ aia.ai_asid = ai.ai_asid;
+ aia.ai_termid.at_type = AU_IPv4;
+ aia.ai_termid.at_addr[0] = ai.ai_termid.machine;
+ aia.ai_termid.at_port = ai.ai_termid.port;
+ } else if (error < 0) {
+ error = errno;
+ syslog(LOG_AUTH | LOG_ERR, "audit: getaudit_addr failed: %s",
+ strerror(errno));
+ errno = error;
+ return (-1);
+ }
+ /*
+ * NB: We should be performing pre-selection here now that we have the
+ * masks for this process.
+ */
+ if (aia.ai_termid.at_type == AU_IPv6)
+ subj_ex = 1;
+ pid = getpid();
+ if (subj_ex == 0) {
+ atid.port = aia.ai_termid.at_port;
+ atid.machine = aia.ai_termid.at_addr[0];
+ token = au_to_subject32(auid, geteuid(), getegid(),
+ getuid(), getgid(), pid, pid, &atid);
+ } else
+ token = au_to_subject_ex(auid, geteuid(), getegid(),
+ getuid(), getgid(), pid, pid, &aia.ai_termid);
+ if (token == NULL) {
+ syslog(LOG_AUTH | LOG_ERR,
+ "audit: unable to build subject token");
+ (void) au_close(afd, AU_TO_NO_WRITE, au_event);
+ errno = EPERM;
+ return (-1);
+ }
+ if (au_write(afd, token) < 0) {
+ error = errno;
+ syslog(LOG_AUTH | LOG_ERR,
+ "audit: au_write failed: %s", strerror(errno));
+ (void) au_close(afd, AU_TO_NO_WRITE, au_event);
+ errno = error;
+ return (-1);
+ }
+ if (fmt != NULL) {
+ va_start(ap, fmt);
+ (void) vsnprintf(text, MAX_AUDITSTRING_LEN, fmt, ap);
+ va_end(ap);
+ token = au_to_text(text);
+ if (token == NULL) {
+ syslog(LOG_AUTH | LOG_ERR,
+ "audit: failed to generate text token");
+ (void) au_close(afd, AU_TO_NO_WRITE, au_event);
+ errno = EPERM;
+ return (-1);
+ }
+ if (au_write(afd, token) < 0) {
+ error = errno;
+ syslog(LOG_AUTH | LOG_ERR,
+ "audit: au_write failed: %s", strerror(errno));
+ (void) au_close(afd, AU_TO_NO_WRITE, au_event);
+ errno = error;
+ return (-1);
+ }
+ }
+ token = au_to_return32(au_errno_to_bsm(status), reterr);
+ if (token == NULL) {
+ syslog(LOG_AUTH | LOG_ERR,
+ "audit: unable to build return token");
+ (void) au_close(afd, AU_TO_NO_WRITE, au_event);
+ errno = EPERM;
+ return (-1);
+ }
+ if (au_write(afd, token) < 0) {
+ error = errno;
+ syslog(LOG_AUTH | LOG_ERR,
+ "audit: au_write failed: %s", strerror(errno));
+ (void) au_close(afd, AU_TO_NO_WRITE, au_event);
+ errno = error;
+ return (-1);
+ }
+ if (au_close(afd, AU_TO_WRITE, au_event) < 0) {
+ error = errno;
+ syslog(LOG_AUTH | LOG_ERR, "audit: record not committed");
+ errno = error;
+ return (-1);
+ }
+ return (0);
+}
+
+int
+audit_set_terminal_port(dev_t *p)
+{
+ struct stat st;
+
+ if (p == NULL)
+ return (kAUBadParamErr);
+
+#ifdef NODEV
+ *p = NODEV;
+#else
+ *p = -1;
+#endif
+
+ /* for /usr/bin/login, try fstat() first */
+ if (fstat(STDIN_FILENO, &st) != 0) {
+ if (errno != EBADF) {
+ syslog(LOG_ERR, "fstat() failed (%s)",
+ strerror(errno));
+ return (kAUStatErr);
+ }
+ if (stat("/dev/console", &st) != 0) {
+ syslog(LOG_ERR, "stat() failed (%s)",
+ strerror(errno));
+ return (kAUStatErr);
+ }
+ }
+ *p = st.st_rdev;
+ return (kAUNoErr);
+}
+
+int
+audit_set_terminal_host(uint32_t *m)
+{
+
+#ifdef KERN_HOSTID
+ int name[2] = { CTL_KERN, KERN_HOSTID };
+ size_t len;
+
+ if (m == NULL)
+ return (kAUBadParamErr);
+ *m = 0;
+ len = sizeof(*m);
+ if (sysctl(name, 2, m, &len, NULL, 0) != 0) {
+ syslog(LOG_ERR, "sysctl() failed (%s)", strerror(errno));
+ return (kAUSysctlErr);
+ }
+ return (kAUNoErr);
+#else
+ *m = -1;
+ return (kAUNoErr);
+#endif
+}
+
+int
+audit_set_terminal_id(au_tid_t *tid)
+{
+ int ret;
+
+ if (tid == NULL)
+ return (kAUBadParamErr);
+ if ((ret = audit_set_terminal_port(&tid->port)) != kAUNoErr)
+ return (ret);
+ return (audit_set_terminal_host(&tid->machine));
+}
+
+/*
+ * This is OK for those callers who have only one token to write. If you have
+ * multiple tokens that logically form part of the same audit record, you need
+ * to use the existing au_open()/au_write()/au_close() API:
+ *
+ * aufd = au_open();
+ * tok = au_to_random_token_1(...);
+ * au_write(aufd, tok);
+ * tok = au_to_random_token_2(...);
+ * au_write(aufd, tok);
+ * ...
+ * au_close(aufd, AU_TO_WRITE, AUE_your_event_type);
+ *
+ * Assumes, like all wrapper calls, that the caller has previously checked
+ * that auditing is enabled via the audit_get_state() call.
+ *
+ * XXX: Should be more robust against bad arguments.
+ */
+int
+audit_write(short event_code, token_t *subject, token_t *misctok, char retval,
+ int errcode)
+{
+ int aufd;
+ char *func = "audit_write()";
+ token_t *rettok;
+
+ if ((aufd = au_open()) == -1) {
+ au_free_token(subject);
+ au_free_token(misctok);
+ syslog(LOG_ERR, "%s: au_open() failed", func);
+ return (kAUOpenErr);
+ }
+
+ /* Save subject. */
+ if (subject && au_write(aufd, subject) == -1) {
+ au_free_token(subject);
+ au_free_token(misctok);
+ (void)au_close(aufd, AU_TO_NO_WRITE, event_code);
+ syslog(LOG_ERR, "%s: write of subject failed", func);
+ return (kAUWriteSubjectTokErr);
+ }
+
+ /* Save the event-specific token. */
+ if (misctok && au_write(aufd, misctok) == -1) {
+ au_free_token(misctok);
+ (void)au_close(aufd, AU_TO_NO_WRITE, event_code);
+ syslog(LOG_ERR, "%s: write of caller token failed", func);
+ return (kAUWriteCallerTokErr);
+ }
+
+ /* Tokenize and save the return value. */
+ if ((rettok = au_to_return32(retval, errcode)) == NULL) {
+ (void)au_close(aufd, AU_TO_NO_WRITE, event_code);
+ syslog(LOG_ERR, "%s: au_to_return32() failed", func);
+ return (kAUMakeReturnTokErr);
+ }
+
+ if (au_write(aufd, rettok) == -1) {
+ au_free_token(rettok);
+ (void)au_close(aufd, AU_TO_NO_WRITE, event_code);
+ syslog(LOG_ERR, "%s: write of return code failed", func);
+ return (kAUWriteReturnTokErr);
+ }
+
+ /*
+ * We assume the caller wouldn't have bothered with this
+ * function if it hadn't already decided to keep the record.
+ */
+ if (au_close(aufd, AU_TO_WRITE, event_code) < 0) {
+ syslog(LOG_ERR, "%s: au_close() failed", func);
+ return (kAUCloseErr);
+ }
+
+ return (kAUNoErr);
+}
+
+/*
+ * Same caveats as audit_write(). In addition, this function explicitly
+ * assumes success; use audit_write_failure() on error.
+ */
+int
+audit_write_success(short event_code, token_t *tok, au_id_t auid, uid_t euid,
+ gid_t egid, uid_t ruid, gid_t rgid, pid_t pid, au_asid_t sid,
+ au_tid_t *tid)
+{
+ char *func = "audit_write_success()";
+ token_t *subject = NULL;
+
+ /* Tokenize and save subject. */
+ subject = au_to_subject32(auid, euid, egid, ruid, rgid, pid, sid,
+ tid);
+ if (subject == NULL) {
+ syslog(LOG_ERR, "%s: au_to_subject32() failed", func);
+ return kAUMakeSubjectTokErr;
+ }
+
+ return (audit_write(event_code, subject, tok, 0, 0));
+}
+
+/*
+ * Same caveats as audit_write(). In addition, this function explicitly
+ * assumes success; use audit_write_failure_self() on error.
+ */
+int
+audit_write_success_self(short event_code, token_t *tok)
+{
+ token_t *subject;
+ char *func = "audit_write_success_self()";
+
+ if ((subject = au_to_me()) == NULL) {
+ syslog(LOG_ERR, "%s: au_to_me() failed", func);
+ return (kAUMakeSubjectTokErr);
+ }
+
+ return (audit_write(event_code, subject, tok, 0, 0));
+}
+
+/*
+ * Same caveats as audit_write(). In addition, this function explicitly
+ * assumes failure; use audit_write_success() otherwise.
+ *
+ * XXX This should let the caller pass an error return value rather than
+ * hard-coding -1.
+ */
+int
+audit_write_failure(short event_code, char *errmsg, int errcode, au_id_t auid,
+ uid_t euid, gid_t egid, uid_t ruid, gid_t rgid, pid_t pid, au_asid_t sid,
+ au_tid_t *tid)
+{
+ char *func = "audit_write_failure()";
+ token_t *subject, *errtok;
+
+ subject = au_to_subject32(auid, euid, egid, ruid, rgid, pid, sid, tid);
+ if (subject == NULL) {
+ syslog(LOG_ERR, "%s: au_to_subject32() failed", func);
+ return (kAUMakeSubjectTokErr);
+ }
+
+ /* tokenize and save the error message */
+ if ((errtok = au_to_text(errmsg)) == NULL) {
+ au_free_token(subject);
+ syslog(LOG_ERR, "%s: au_to_text() failed", func);
+ return (kAUMakeTextTokErr);
+ }
+
+ return (audit_write(event_code, subject, errtok, -1, errcode));
+}
+
+/*
+ * Same caveats as audit_write(). In addition, this function explicitly
+ * assumes failure; use audit_write_success_self() otherwise.
+ *
+ * XXX This should let the caller pass an error return value rather than
+ * hard-coding -1.
+ */
+int
+audit_write_failure_self(short event_code, char *errmsg, int errret)
+{
+ char *func = "audit_write_failure_self()";
+ token_t *subject, *errtok;
+
+ if ((subject = au_to_me()) == NULL) {
+ syslog(LOG_ERR, "%s: au_to_me() failed", func);
+ return (kAUMakeSubjectTokErr);
+ }
+ /* tokenize and save the error message */
+ if ((errtok = au_to_text(errmsg)) == NULL) {
+ au_free_token(subject);
+ syslog(LOG_ERR, "%s: au_to_text() failed", func);
+ return (kAUMakeTextTokErr);
+ }
+ return (audit_write(event_code, subject, errtok, -1, errret));
+}
+
+/*
+ * For auditing errors during login. Such errors are implicitly
+ * non-attributable (i.e., not ascribable to any user).
+ *
+ * Assumes, like all wrapper calls, that the caller has previously checked
+ * that auditing is enabled via the audit_get_state() call.
+ */
+int
+audit_write_failure_na(short event_code, char *errmsg, int errret, uid_t euid,
+ uid_t egid, pid_t pid, au_tid_t *tid)
+{
+
+ return (audit_write_failure(event_code, errmsg, errret, -1, euid,
+ egid, -1, -1, pid, -1, tid));
+}
+
+/* END OF au_write() WRAPPERS */
+
+#ifdef __APPLE__
+void
+audit_token_to_au32(audit_token_t atoken, uid_t *auidp, uid_t *euidp,
+ gid_t *egidp, uid_t *ruidp, gid_t *rgidp, pid_t *pidp, au_asid_t *asidp,
+ au_tid_t *tidp)
+{
+
+ if (auidp != NULL)
+ *auidp = (uid_t)atoken.val[0];
+ if (euidp != NULL)
+ *euidp = (uid_t)atoken.val[1];
+ if (egidp != NULL)
+ *egidp = (gid_t)atoken.val[2];
+ if (ruidp != NULL)
+ *ruidp = (uid_t)atoken.val[3];
+ if (rgidp != NULL)
+ *rgidp = (gid_t)atoken.val[4];
+ if (pidp != NULL)
+ *pidp = (pid_t)atoken.val[5];
+ if (asidp != NULL)
+ *asidp = (au_asid_t)atoken.val[6];
+ if (tidp != NULL) {
+ audit_set_terminal_host(&tidp->machine);
+ tidp->port = (dev_t)atoken.val[7];
+ }
+}
+#endif /* !__APPLE__ */
+
+int
+audit_get_cond(int *cond)
+{
+ int ret;
+
+ ret = auditon(A_GETCOND, cond, sizeof(*cond));
+#ifdef A_OLDGETCOND
+ if ((0 != ret) && EINVAL == errno) {
+ long lcond = *cond;
+
+ ret = auditon(A_OLDGETCOND, &lcond, sizeof(lcond));
+ *cond = (int)lcond;
+ }
+#endif
+ return (ret);
+}
+
+int
+audit_set_cond(int *cond)
+{
+ int ret;
+
+ ret = auditon(A_SETCOND, cond, sizeof(*cond));
+#ifdef A_OLDSETCOND
+ if ((0 != ret) && (EINVAL == errno)) {
+ long lcond = (long)*cond;
+
+ ret = auditon(A_OLDSETCOND, &lcond, sizeof(lcond));
+ *cond = (int)lcond;
+ }
+#endif
+ return (ret);
+}
+
+int
+audit_get_policy(int *policy)
+{
+ int ret;
+
+ ret = auditon(A_GETPOLICY, policy, sizeof(*policy));
+#ifdef A_OLDGETPOLICY
+ if ((0 != ret) && (EINVAL == errno)){
+ long lpolicy = (long)*policy;
+
+ ret = auditon(A_OLDGETPOLICY, &lpolicy, sizeof(lpolicy));
+ *policy = (int)lpolicy;
+ }
+#endif
+ return (ret);
+}
+
+int
+audit_set_policy(int *policy)
+{
+ int ret;
+
+ ret = auditon(A_SETPOLICY, policy, sizeof(*policy));
+#ifdef A_OLDSETPOLICY
+ if ((0 != ret) && (EINVAL == errno)){
+ long lpolicy = (long)*policy;
+
+ ret = auditon(A_OLDSETPOLICY, &lpolicy, sizeof(lpolicy));
+ *policy = (int)lpolicy;
+ }
+#endif
+ return (ret);
+}
+
+int
+audit_get_qctrl(au_qctrl_t *qctrl, size_t sz)
+{
+ int ret;
+
+ if (sizeof(*qctrl) != sz) {
+ errno = EINVAL;
+ return (-1);
+ }
+
+ ret = auditon(A_GETQCTRL, qctrl, sizeof(*qctrl));
+#ifdef A_OLDGETQCTRL
+ if ((0 != ret) && (EINVAL == errno)){
+ struct old_qctrl {
+ size_t oq_hiwater;
+ size_t oq_lowater;
+ size_t oq_bufsz;
+ clock_t oq_delay;
+ int oq_minfree;
+ } oq;
+
+ oq.oq_hiwater = (size_t)qctrl->aq_hiwater;
+ oq.oq_lowater = (size_t)qctrl->aq_lowater;
+ oq.oq_bufsz = (size_t)qctrl->aq_bufsz;
+ oq.oq_delay = (clock_t)qctrl->aq_delay;
+ oq.oq_minfree = qctrl->aq_minfree;
+
+ ret = auditon(A_OLDGETQCTRL, &oq, sizeof(oq));
+
+ qctrl->aq_hiwater = (int)oq.oq_hiwater;
+ qctrl->aq_lowater = (int)oq.oq_lowater;
+ qctrl->aq_bufsz = (int)oq.oq_bufsz;
+ qctrl->aq_delay = (int)oq.oq_delay;
+ qctrl->aq_minfree = oq.oq_minfree;
+ }
+#endif /* A_OLDGETQCTRL */
+ return (ret);
+}
+
+int
+audit_set_qctrl(au_qctrl_t *qctrl, size_t sz)
+{
+ int ret;
+
+ if (sizeof(*qctrl) != sz) {
+ errno = EINVAL;
+ return (-1);
+ }
+
+ ret = auditon(A_SETQCTRL, qctrl, sz);
+#ifdef A_OLDSETQCTRL
+ if ((0 != ret) && (EINVAL == errno)) {
+ struct old_qctrl {
+ size_t oq_hiwater;
+ size_t oq_lowater;
+ size_t oq_bufsz;
+ clock_t oq_delay;
+ int oq_minfree;
+ } oq;
+
+ oq.oq_hiwater = (size_t)qctrl->aq_hiwater;
+ oq.oq_lowater = (size_t)qctrl->aq_lowater;
+ oq.oq_bufsz = (size_t)qctrl->aq_bufsz;
+ oq.oq_delay = (clock_t)qctrl->aq_delay;
+ oq.oq_minfree = qctrl->aq_minfree;
+
+ ret = auditon(A_OLDSETQCTRL, &oq, sizeof(oq));
+
+ qctrl->aq_hiwater = (int)oq.oq_hiwater;
+ qctrl->aq_lowater = (int)oq.oq_lowater;
+ qctrl->aq_bufsz = (int)oq.oq_bufsz;
+ qctrl->aq_delay = (int)oq.oq_delay;
+ qctrl->aq_minfree = oq.oq_minfree;
+ }
+#endif /* A_OLDSETQCTRL */
+ return (ret);
+}
+
+int
+audit_send_trigger(int *trigger)
+{
+
+ return (auditon(A_SENDTRIGGER, trigger, sizeof(*trigger)));
+}
+
+int
+audit_get_kaudit(auditinfo_addr_t *aia, size_t sz)
+{
+
+ if (sizeof(*aia) != sz) {
+ errno = EINVAL;
+ return (-1);
+ }
+
+ return (auditon(A_GETKAUDIT, aia, sz));
+}
+
+int
+audit_set_kaudit(auditinfo_addr_t *aia, size_t sz)
+{
+
+ if (sizeof(*aia) != sz) {
+ errno = EINVAL;
+ return (-1);
+ }
+
+ return (auditon(A_SETKAUDIT, aia, sz));
+}
+
+int
+audit_get_class(au_evclass_map_t *evc_map, size_t sz)
+{
+
+ if (sizeof(*evc_map) != sz) {
+ errno = EINVAL;
+ return (-1);
+ }
+
+ return (auditon(A_GETCLASS, evc_map, sz));
+}
+
+int
+audit_set_class(au_evclass_map_t *evc_map, size_t sz)
+{
+
+ if (sizeof(*evc_map) != sz) {
+ errno = EINVAL;
+ return (-1);
+ }
+
+ return (auditon(A_SETCLASS, evc_map, sz));
+}
+
+int
+audit_get_kmask(au_mask_t *kmask, size_t sz)
+{
+ if (sizeof(*kmask) != sz) {
+ errno = EINVAL;
+ return (-1);
+ }
+
+ return (auditon(A_GETKMASK, kmask, sz));
+}
+
+int
+audit_set_kmask(au_mask_t *kmask, size_t sz)
+{
+ if (sizeof(*kmask) != sz) {
+ errno = EINVAL;
+ return (-1);
+ }
+
+ return (auditon(A_SETKMASK, kmask, sz));
+}
+
+int
+audit_get_fsize(au_fstat_t *fstat, size_t sz)
+{
+
+ if (sizeof(*fstat) != sz) {
+ errno = EINVAL;
+ return (-1);
+ }
+
+ return (auditon(A_GETFSIZE, fstat, sz));
+}
+
+int
+audit_set_fsize(au_fstat_t *fstat, size_t sz)
+{
+
+ if (sizeof(*fstat) != sz) {
+ errno = EINVAL;
+ return (-1);
+ }
+
+ return (auditon(A_SETFSIZE, fstat, sz));
+}
+
+int
+audit_set_pmask(auditpinfo_t *api, size_t sz)
+{
+
+ if (sizeof(*api) != sz) {
+ errno = EINVAL;
+ return (-1);
+ }
+
+ return (auditon(A_SETPMASK, api, sz));
+}
+
+int
+audit_get_pinfo(auditpinfo_t *api, size_t sz)
+{
+
+ if (sizeof(*api) != sz) {
+ errno = EINVAL;
+ return (-1);
+ }
+
+ return (auditon(A_GETPINFO, api, sz));
+}
+
+int
+audit_get_pinfo_addr(auditpinfo_addr_t *apia, size_t sz)
+{
+
+ if (sizeof(*apia) != sz) {
+ errno = EINVAL;
+ return (-1);
+ }
+
+ return (auditon(A_GETPINFO_ADDR, apia, sz));
+}
+
+int
+audit_get_sinfo_addr(auditinfo_addr_t *aia, size_t sz)
+{
+
+ if (sizeof(*aia) != sz) {
+ errno = EINVAL;
+ return (-1);
+ }
+
+ return (auditon(A_GETSINFO_ADDR, aia, sz));
+}
+
+int
+audit_get_stat(au_stat_t *stats, size_t sz)
+{
+
+ if (sizeof(*stats) != sz) {
+ errno = EINVAL;
+ return (-1);
+ }
+
+ return (auditon(A_GETSTAT, stats, sz));
+}
+
+int
+audit_set_stat(au_stat_t *stats, size_t sz)
+{
+
+ if (sizeof(*stats) != sz) {
+ errno = EINVAL;
+ return (-1);
+ }
+
+ return (auditon(A_GETSTAT, stats, sz));
+}
+
+int
+audit_get_cwd(char *path, size_t sz)
+{
+
+ return (auditon(A_GETCWD, path, sz));
+}
+
+int
+audit_get_car(char *path, size_t sz)
+{
+
+ return (auditon(A_GETCAR, path, sz));
+}
Deleted: vendor/openbsm/1.2_alpha4/libbsm/libbsm.3
===================================================================
--- vendor/openbsm/dist/libbsm/libbsm.3 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/libbsm/libbsm.3 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,232 +0,0 @@
-.\"-
-.\" Copyright (c) 2005-2007 Robert N. M. Watson
-.\" All rights reserved.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\" notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\" notice, this list of conditions and the following disclaimer in the
-.\" documentation and/or other materials provided with the distribution.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY THE AUTHORS AND CONTRIBUTORS ``AS IS'' AND
-.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-.\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE LIABLE
-.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-.\" SUCH DAMAGE.
-.\"
-.\" $P4: //depot/projects/trustedbsd/openbsm/libbsm/libbsm.3#13 $
-.\"
-.Dd April 19, 2005
-.Dt LIBBSM 3
-.Os
-.Sh NAME
-.Nm libbsm
-.Nd "Basic Security Module (BSM) Audit API"
-.Sh LIBRARY
-.Lb libbsm
-.Sh SYNOPSIS
-.In bsm/libbsm.h
-.Sh DESCRIPTION
-The
-.Nm
-library routines provide an interface to BSM audit record streams, allowing
-both the parsing of existing audit streams, as well as the creation of new
-audit records and streams.
-.Sh INTERFACES
-The
-.Nm
-library
-provides a large number of Audit programming interfaces in several classes:
-event stream interfaces, class interfaces, control interfaces, event
-interfaces, I/O interfaces, mask interfaces, notification interfaces, token
-interfaces, and user interfaces.
-These are described respectively in the
-.Xr au_class 3 ,
-.Xr au_control 3 ,
-.Xr au_event 3 ,
-.Xr au_mask 3 ,
-.Xr au_notify 3 ,
-.Xr au_stream 3 ,
-.Xr au_token 3 ,
-and
-.Xr au_user 3
-manual pages.
-.Ss Audit Event Stream Interfaces
-Audit event stream interfaces support interaction with file-backed audit
-event streams:
-.Xr au_close 3 ,
-.Xr au_close_buffer 3 ,
-.Xr au_free_token 3 ,
-.Xr au_open 3 ,
-.Xr au_write 3 ,
-.Xr audit_submit 3 .
-.Ss Audit Class Interfaces
-Audit class interfaces support the look up of information from the
-.Xr audit_class 5
-database:
-.Xr endauclass 3 ,
-.Xr getauclassent 3 ,
-.Xr getauclassent_r 3 ,
-.Xr getauclassnam 3 ,
-.Xr getauclassnam_r 3 ,
-.Xr setauclass 3 .
-.Ss Audit Control Interfaces
-Audit control interfaces support the look up of information from the
-.Xr audit_control 5
-database:
-.Xr endac 3 ,
-.Xr setac 3 ,
-.Xr getacdir 3 ,
-.Xr getacfilesz 3 ,
-.Xr getacflg 3 ,
-.Xr getacmin 3 ,
-.Xr getacna 3 ,
-.Xr getacpol 3 ,
-.Xr au_poltostr 3 ,
-.Xr au_strtopol 3 .
-.Ss Audit Event Interfaces
-Audit event interfaces support the look up of information from the
-.Xr audit_event 5
-database:
-.Xr endauevent 3 ,
-.Xr setauevent 3 ,
-.Xr getauevent 3 ,
-.Xr getauevent_r 3 ,
-.Xr getauevnam 3 ,
-.Xr getauevnam_r 3 ,
-.Xr getauevnonam 3 ,
-.Xr getauevnonam_r 3 ,
-.Xr getauevnum 3 ,
-.Xr getauevnum_r 3 .
-.Ss Audit I/O Interfaces
-Audit I/O interfaces support the processing and printing of tokens, as well
-as the reading of audit records:
-.Xr au_fetch_tok 3 ,
-.Xr au_print_tok 3 ,
-.Xr au_read_rec 3 .
-.Ss Audit Mask Interfaces
-Audit mask interfaces convert support the conversion between strings and
-.Vt au_mask_t
-values.
-They may also be used to determine if a particular audit event is matched
-by a mask:
-.Xr au_preselect 3 ,
-.Xr getauditflagsbin 3 ,
-.Xr getauditflagschar 3 .
-.Ss Audit Notification Interfaces
-Audit notification routines track audit state in a form permitting efficient
-update, avoiding frequent system calls to check the kernel audit state:
-.Xr au_get_state 3 ,
-.Xr au_notify_initialize 3 ,
-.Xr au_notify_terminate 3 .
-These interfaces are implemented only for Darwin/Mac OS X.
-.Ss Audit Token Interface
-Audit token interfaces permit the creation of tokens for use in creating
-audit records for submission to event streams.
-Each interface converts a C type to its
-.Vt token_t
-representation:
-.Xr au_to_arg 3 ,
-.Xr au_to_arg32 3 ,
-.Xr au_to_arg64 3 ,
-.Xr au_to_attr64 3 ,
-.Xr au_to_data 3 ,
-.Xr au_to_exec_args 3 ,
-.Xr au_to_exec_env 3 ,
-.Xr au_to_exit 3 ,
-.Xr au_to_file 3 ,
-.Xr au_to_groups 3 ,
-.Xr au_to_header32 3 ,
-.Xr au_to_header64 3 ,
-.Xr au_to_in_addr 3 ,
-.Xr au_to_in_addr_ex 3 ,
-.Xr au_to_ip 3 ,
-.Xr au_to_ipc 3 ,
-.Xr au_to_ipc_perm 3 ,
-.Xr au_to_iport 3 ,
-.Xr au_to_me 3 ,
-.Xr au_to_newgroups 3 ,
-.Xr au_to_opaque 3 ,
-.Xr au_to_path 3 ,
-.Xr au_to_process 3 ,
-.Xr au_to_process32 3 ,
-.Xr au_to_process64 3 ,
-.Xr au_to_process_ex 3 ,
-.Xr au_to_process32_ex 3 ,
-.Xr au_to_process64_ex 3 ,
-.Xr au_to_return 3 ,
-.Xr au_to_return32 3 ,
-.Xr au_to_return64 3 ,
-.Xr au_to_seq 3 ,
-.Xr au_to_sock_inet 3 ,
-.Xr au_to_sock_inet32 3 ,
-.Xr au_to_sock_inet128 3 ,
-.Xr au_to_subject 3 ,
-.Xr au_to_subject32 3 ,
-.Xr au_to_subject64 3 ,
-.Xr au_to_subject_ex 3 ,
-.Xr au_to_subject32_ex 3 ,
-.Xr au_to_subject64_ex 3 ,
-.Xr au_to_text 3 ,
-.Xr au_to_trailer 3 ,
-.Xr au_to_zonename 3 .
-.Ss Audit User Interfaces
-Audit user interfaces support the look up of information from the
-.Xr audit_user 5
-database:
-.Xr au_user_mask 3 ,
-.Xr endauuser 3 ,
-.Xr setauuser 3 ,
-.Xr getauuserent 3 ,
-.Xr getauuserent_r 3 ,
-.Xr getauusernam 3 ,
-.Xr getauusernam_r 3 ,
-.Xr getfauditflags 3 .
-.Sh SEE ALSO
-.Xr au_class 3 ,
-.Xr audit_submit 3 ,
-.Xr au_mask 3 ,
-.Xr au_notify 3 ,
-.Xr au_stream 3 ,
-.Xr au_token 3 ,
-.Xr au_user 3 ,
-.Xr audit_class 5 ,
-.Xr audit_control 5
-.Sh HISTORY
-The OpenBSM implementation was created by McAfee Research, the security
-division of McAfee Inc., under contract to Apple Computer, Inc., in 2004.
-It was subsequently adopted by the TrustedBSD Project as the foundation for
-the OpenBSM distribution.
-.Sh AUTHORS
-.An -nosplit
-This software was created by
-.An Robert Watson ,
-.An Wayne Salamon ,
-and
-.An Suresh Krishnaswamy
-for McAfee Research, the security research division of McAfee,
-Inc., under contract to Apple Computer, Inc.
-.Pp
-The Basic Security Module (BSM) interface to audit records and audit event
-stream format were defined by Sun Microsystems.
-.Sh BUGS
-Bugs would not be unlikely.
-.Pp
-The
-.Nm
-library implementations are generally thread-safe, but not reentrant.
-.Pp
-The assignment of routines to classes could use some work, as it is
-decidely ad hoc.
-For example,
-.Fn au_read_rec
-should probably be considered a stream routine.
Copied: vendor/openbsm/1.2_alpha4/libbsm/libbsm.3 (from rev 11163, vendor/openbsm/dist/libbsm/libbsm.3)
===================================================================
--- vendor/openbsm/1.2_alpha4/libbsm/libbsm.3 (rev 0)
+++ vendor/openbsm/1.2_alpha4/libbsm/libbsm.3 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,248 @@
+.\"-
+.\" Copyright (c) 2005-2007 Robert N. M. Watson
+.\" Copyright (c) 2008-2009 Apple Inc.
+.\" All rights reserved.
+.\"
+.\" Redistribution and use in source and binary forms, with or without
+.\" modification, are permitted provided that the following conditions
+.\" are met:
+.\" 1. Redistributions of source code must retain the above copyright
+.\" notice, this list of conditions and the following disclaimer.
+.\" 2. Redistributions in binary form must reproduce the above copyright
+.\" notice, this list of conditions and the following disclaimer in the
+.\" documentation and/or other materials provided with the distribution.
+.\"
+.\" THIS SOFTWARE IS PROVIDED BY THE AUTHORS AND CONTRIBUTORS ``AS IS'' AND
+.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+.\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE LIABLE
+.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+.\" SUCH DAMAGE.
+.\"
+.Dd March 5, 2009
+.Dt LIBBSM 3
+.Os
+.Sh NAME
+.Nm libbsm
+.Nd "Basic Security Module (BSM) Audit API"
+.Sh LIBRARY
+.Lb libbsm
+.Sh SYNOPSIS
+.In bsm/libbsm.h
+.Sh DESCRIPTION
+The
+.Nm
+library routines provide an interface to BSM audit record streams, allowing
+both the parsing of existing audit streams, as well as the creation of new
+audit records and streams.
+.Sh INTERFACES
+The
+.Nm
+library
+provides a large number of Audit programming interfaces in several classes:
+event stream interfaces, class interfaces, control interfaces, event
+interfaces, I/O interfaces, mask interfaces, notification interfaces, token
+interfaces, and user interfaces.
+These are described respectively in the
+.Xr au_class 3 ,
+.Xr au_control 3 ,
+.Xr au_event 3 ,
+.Xr au_mask 3 ,
+.Xr au_notify 3 ,
+.Xr au_stream 3 ,
+.Xr au_token 3 ,
+and
+.Xr au_user 3
+manual pages.
+.Ss Audit Event Stream Interfaces
+Audit event stream interfaces support interaction with file-backed audit
+event streams:
+.Xr au_close 3 ,
+.Xr au_close_buffer 3 ,
+.Xr au_free_token 3 ,
+.Xr au_open 3 ,
+.Xr au_write 3 ,
+.Xr audit_submit 3 .
+.Ss Audit Class Interfaces
+Audit class interfaces support the look up of information from the
+.Xr audit_class 5
+database:
+.Xr endauclass 3 ,
+.Xr getauclassent 3 ,
+.Xr getauclassent_r 3 ,
+.Xr getauclassnam 3 ,
+.Xr getauclassnam_r 3 ,
+.Xr setauclass 3 .
+.Ss Audit Control Interfaces
+Audit control interfaces support the look up of information from the
+.Xr audit_control 5
+database:
+.Xr endac 3 ,
+.Xr setac 3 ,
+.Xr getacdir 3 ,
+.Xr getacfilesz 3 ,
+.Xr getacflg 3 ,
+.Xr getacmin 3 ,
+.Xr getacna 3 ,
+.Xr getacpol 3 ,
+.Xr au_poltostr 3 ,
+.Xr au_strtopol 3 .
+.Ss Audit Event Interfaces
+Audit event interfaces support the look up of information from the
+.Xr audit_event 5
+database:
+.Xr endauevent 3 ,
+.Xr setauevent 3 ,
+.Xr getauevent 3 ,
+.Xr getauevent_r 3 ,
+.Xr getauevnam 3 ,
+.Xr getauevnam_r 3 ,
+.Xr getauevnonam 3 ,
+.Xr getauevnonam_r 3 ,
+.Xr getauevnum 3 ,
+.Xr getauevnum_r 3 .
+.Ss Audit I/O Interfaces
+Audit I/O interfaces support the processing and printing of tokens, as well
+as the reading of audit records:
+.Xr au_fetch_tok 3 ,
+.Xr au_print_tok 3 ,
+.Xr au_read_rec 3 .
+.Ss Audit Mask Interfaces
+Audit mask interfaces convert support the conversion between strings and
+.Vt au_mask_t
+values.
+They may also be used to determine if a particular audit event is matched
+by a mask:
+.Xr au_preselect 3 ,
+.Xr getauditflagsbin 3 ,
+.Xr getauditflagschar 3 .
+.Ss Audit Notification Interfaces
+Audit notification routines track audit state in a form permitting efficient
+update, avoiding frequent system calls to check the kernel audit state:
+.Xr au_get_state 3 ,
+.Xr au_notify_initialize 3 ,
+.Xr au_notify_terminate 3 .
+These interfaces are implemented only for Darwin/Mac OS X.
+.Ss Audit Token Interface
+Audit token interfaces permit the creation of tokens for use in creating
+audit records for submission to event streams.
+Each interface converts a C type to its
+.Vt token_t
+representation:
+.Xr au_to_arg 3 ,
+.Xr au_to_arg32 3 ,
+.Xr au_to_arg64 3 ,
+.Xr au_to_attr64 3 ,
+.Xr au_to_data 3 ,
+.Xr au_to_exec_args 3 ,
+.Xr au_to_exec_env 3 ,
+.Xr au_to_exit 3 ,
+.Xr au_to_file 3 ,
+.Xr au_to_groups 3 ,
+.Xr au_to_header32 3 ,
+.Xr au_to_header64 3 ,
+.Xr au_to_in_addr 3 ,
+.Xr au_to_in_addr_ex 3 ,
+.Xr au_to_ip 3 ,
+.Xr au_to_ipc 3 ,
+.Xr au_to_ipc_perm 3 ,
+.Xr au_to_iport 3 ,
+.Xr au_to_me 3 ,
+.Xr au_to_newgroups 3 ,
+.Xr au_to_opaque 3 ,
+.Xr au_to_path 3 ,
+.Xr au_to_process 3 ,
+.Xr au_to_process32 3 ,
+.Xr au_to_process64 3 ,
+.Xr au_to_process_ex 3 ,
+.Xr au_to_process32_ex 3 ,
+.Xr au_to_process64_ex 3 ,
+.Xr au_to_return 3 ,
+.Xr au_to_return32 3 ,
+.Xr au_to_return64 3 ,
+.Xr au_to_seq 3 ,
+.Xr au_to_sock_inet 3 ,
+.Xr au_to_sock_inet32 3 ,
+.Xr au_to_sock_inet128 3 ,
+.Xr au_to_socket_ex 3 ,
+.Xr au_to_subject 3 ,
+.Xr au_to_subject32 3 ,
+.Xr au_to_subject64 3 ,
+.Xr au_to_subject_ex 3 ,
+.Xr au_to_subject32_ex 3 ,
+.Xr au_to_subject64_ex 3 ,
+.Xr au_to_text 3 ,
+.Xr au_to_trailer 3 ,
+.Xr au_to_zonename 3 .
+.Ss Audit User Interfaces
+Audit user interfaces support the look up of information from the
+.Xr audit_user 5
+database:
+.Xr au_user_mask 3 ,
+.Xr endauuser 3 ,
+.Xr setauuser 3 ,
+.Xr getauuserent 3 ,
+.Xr getauuserent_r 3 ,
+.Xr getauusernam 3 ,
+.Xr getauusernam_r 3 ,
+.Xr getfauditflags 3 .
+.Ss Audit Constant Conversion Interfaces
+These functions convert between BSM and local constants, including the
+.Xr errno 2
+number, socket type, and protocol famil spaces, and must be used to generate
+and interpret BSM return and extended socket tokens:
+.Xr au_bsm_to_domain 3 ,
+.Xr au_bsm_to_errno 3 ,
+.Xr au_bsm_to_fcntl_cmd 3 ,
+.Xr au_bsm_to_socket_type 3 ,
+.Xr au_domain_to_bsm 3 ,
+.Xr au_errno_to_bsm 3 ,
+.Xr au_fcntl_cmd_to_bsm 3 ,
+.Xr au_socket_type_to_bsm 3 .
+.Sh SEE ALSO
+.Xr au_class 3 ,
+.Xr au_domain 3 ,
+.Xr au_errno 3 ,
+.Xr au_mask 3 ,
+.Xr au_notify 3 ,
+.Xr au_socket_type 3 ,
+.Xr au_stream 3 ,
+.Xr au_token 3 ,
+.Xr au_user 3 ,
+.Xr audit_submit 3 ,
+.Xr audit_class 5 ,
+.Xr audit_control 5
+.Sh HISTORY
+The OpenBSM implementation was created by McAfee Research, the security
+division of McAfee Inc., under contract to Apple Computer, Inc., in 2004.
+It was subsequently adopted by the TrustedBSD Project as the foundation for
+the OpenBSM distribution.
+.Sh AUTHORS
+.An -nosplit
+This software was created by
+.An Robert Watson ,
+.An Wayne Salamon ,
+and
+.An Suresh Krishnaswamy
+for McAfee Research, the security research division of McAfee,
+Inc., under contract to Apple Computer, Inc.
+.Pp
+The Basic Security Module (BSM) interface to audit records and audit event
+stream format were defined by Sun Microsystems.
+.Sh BUGS
+Bugs would not be unlikely.
+.Pp
+The
+.Nm
+library implementations are generally thread-safe, but not reentrant.
+.Pp
+The assignment of routines to classes could use some work, as it is
+decidely ad hoc.
+For example,
+.Fn au_read_rec
+should probably be considered a stream routine.
Deleted: vendor/openbsm/1.2_alpha4/man/Makefile.am
===================================================================
--- vendor/openbsm/dist/man/Makefile.am 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/man/Makefile.am 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,24 +0,0 @@
-#
-# $P4: //depot/projects/trustedbsd/openbsm/man/Makefile.am#1 $
-#
-
-man2_MANS = \
- audit.2 \
- auditctl.2 \
- auditon.2 \
- getaudit.2 \
- getauid.2 \
- setaudit.2 \
- setauid.2
-
-man5_MANS = \
- audit.log.5 \
- audit_class.5 \
- audit_control.5 \
- audit_event.5 \
- audit_user.5 \
- audit_warn.5
-
-# How to do MLINKS in automake?
-# MLINKS= getaudit.2 getaudit_addr.2 \
-# setaudit.2 setaudit_addr.2
Copied: vendor/openbsm/1.2_alpha4/man/Makefile.am (from rev 11163, vendor/openbsm/dist/man/Makefile.am)
===================================================================
--- vendor/openbsm/1.2_alpha4/man/Makefile.am (rev 0)
+++ vendor/openbsm/1.2_alpha4/man/Makefile.am 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,21 @@
+man2_MANS = \
+ audit.2 \
+ auditctl.2 \
+ auditon.2 \
+ getaudit.2 \
+ getauid.2 \
+ setaudit.2 \
+ setauid.2
+
+man5_MANS = \
+ audit.log.5 \
+ audit_class.5 \
+ audit_control.5 \
+ audit_event.5 \
+ audit_user.5 \
+ audit_warn.5
+
+install-exec-hook:
+ cd $(DESTDIR)$(mandir) && \
+ $(LN_S) -f getaudit.2 getaudit_addr.2 && \
+ $(LN_S) -f setaudit.2 setaudit_addr.2
Deleted: vendor/openbsm/1.2_alpha4/man/Makefile.in
===================================================================
--- vendor/openbsm/dist/man/Makefile.in 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/man/Makefile.in 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,448 +0,0 @@
-# Makefile.in generated by automake 1.10 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
- at SET_MAKE@
-
-#
-# $P4: //depot/projects/trustedbsd/openbsm/man/Makefile.in#4 $
-#
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = man
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/config/config.h
-CONFIG_CLEAN_FILES =
-SOURCES =
-DIST_SOURCES =
-man2dir = $(mandir)/man2
-am__installdirs = "$(DESTDIR)$(man2dir)" "$(DESTDIR)$(man5dir)"
-man5dir = $(mandir)/man5
-NROFF = nroff
-MANS = $(man2_MANS) $(man5_MANS)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AMTAR = @AMTAR@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO = @ECHO@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-F77 = @F77@
-FFLAGS = @FFLAGS@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-VERSION = @VERSION@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-man2_MANS = \
- audit.2 \
- auditctl.2 \
- auditon.2 \
- getaudit.2 \
- getauid.2 \
- setaudit.2 \
- setauid.2
-
-man5_MANS = \
- audit.log.5 \
- audit_class.5 \
- audit_control.5 \
- audit_event.5 \
- audit_user.5 \
- audit_warn.5
-
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
- && exit 0; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign man/Makefile'; \
- cd $(top_srcdir) && \
- $(AUTOMAKE) --foreign man/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-install-man2: $(man2_MANS) $(man_MANS)
- @$(NORMAL_INSTALL)
- test -z "$(man2dir)" || $(MKDIR_P) "$(DESTDIR)$(man2dir)"
- @list='$(man2_MANS) $(dist_man2_MANS) $(nodist_man2_MANS)'; \
- l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
- for i in $$l2; do \
- case "$$i" in \
- *.2*) list="$$list $$i" ;; \
- esac; \
- done; \
- for i in $$list; do \
- if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
- else file=$$i; fi; \
- ext=`echo $$i | sed -e 's/^.*\\.//'`; \
- case "$$ext" in \
- 2*) ;; \
- *) ext='2' ;; \
- esac; \
- inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
- inst=`echo $$inst | sed -e 's/^.*\///'`; \
- inst=`echo $$inst | sed '$(transform)'`.$$ext; \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man2dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man2dir)/$$inst"; \
- done
-uninstall-man2:
- @$(NORMAL_UNINSTALL)
- @list='$(man2_MANS) $(dist_man2_MANS) $(nodist_man2_MANS)'; \
- l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
- for i in $$l2; do \
- case "$$i" in \
- *.2*) list="$$list $$i" ;; \
- esac; \
- done; \
- for i in $$list; do \
- ext=`echo $$i | sed -e 's/^.*\\.//'`; \
- case "$$ext" in \
- 2*) ;; \
- *) ext='2' ;; \
- esac; \
- inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
- inst=`echo $$inst | sed -e 's/^.*\///'`; \
- inst=`echo $$inst | sed '$(transform)'`.$$ext; \
- echo " rm -f '$(DESTDIR)$(man2dir)/$$inst'"; \
- rm -f "$(DESTDIR)$(man2dir)/$$inst"; \
- done
-install-man5: $(man5_MANS) $(man_MANS)
- @$(NORMAL_INSTALL)
- test -z "$(man5dir)" || $(MKDIR_P) "$(DESTDIR)$(man5dir)"
- @list='$(man5_MANS) $(dist_man5_MANS) $(nodist_man5_MANS)'; \
- l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
- for i in $$l2; do \
- case "$$i" in \
- *.5*) list="$$list $$i" ;; \
- esac; \
- done; \
- for i in $$list; do \
- if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
- else file=$$i; fi; \
- ext=`echo $$i | sed -e 's/^.*\\.//'`; \
- case "$$ext" in \
- 5*) ;; \
- *) ext='5' ;; \
- esac; \
- inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
- inst=`echo $$inst | sed -e 's/^.*\///'`; \
- inst=`echo $$inst | sed '$(transform)'`.$$ext; \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man5dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man5dir)/$$inst"; \
- done
-uninstall-man5:
- @$(NORMAL_UNINSTALL)
- @list='$(man5_MANS) $(dist_man5_MANS) $(nodist_man5_MANS)'; \
- l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
- for i in $$l2; do \
- case "$$i" in \
- *.5*) list="$$list $$i" ;; \
- esac; \
- done; \
- for i in $$list; do \
- ext=`echo $$i | sed -e 's/^.*\\.//'`; \
- case "$$ext" in \
- 5*) ;; \
- *) ext='5' ;; \
- esac; \
- inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
- inst=`echo $$inst | sed -e 's/^.*\///'`; \
- inst=`echo $$inst | sed '$(transform)'`.$$ext; \
- echo " rm -f '$(DESTDIR)$(man5dir)/$$inst'"; \
- rm -f "$(DESTDIR)$(man5dir)/$$inst"; \
- done
-tags: TAGS
-TAGS:
-
-ctags: CTAGS
-CTAGS:
-
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
- fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
- else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(MANS)
-installdirs:
- for dir in "$(DESTDIR)$(man2dir)" "$(DESTDIR)$(man5dir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic clean-libtool mostlyclean-am
-
-distclean: distclean-am
- -rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-info: info-am
-
-info-am:
-
-install-data-am: install-man
-
-install-dvi: install-dvi-am
-
-install-exec-am:
-
-install-html: install-html-am
-
-install-info: install-info-am
-
-install-man: install-man2 install-man5
-
-install-pdf: install-pdf-am
-
-install-ps: install-ps-am
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-man
-
-uninstall-man: uninstall-man2 uninstall-man5
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic clean-libtool \
- distclean distclean-generic distclean-libtool distdir dvi \
- dvi-am html html-am info info-am install install-am \
- install-data install-data-am install-dvi install-dvi-am \
- install-exec install-exec-am install-html install-html-am \
- install-info install-info-am install-man install-man2 \
- install-man5 install-pdf install-pdf-am install-ps \
- install-ps-am install-strip installcheck installcheck-am \
- installdirs maintainer-clean maintainer-clean-generic \
- mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
- ps ps-am uninstall uninstall-am uninstall-man uninstall-man2 \
- uninstall-man5
-
-
-# How to do MLINKS in automake?
-# MLINKS= getaudit.2 getaudit_addr.2 \
-# setaudit.2 setaudit_addr.2
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
Copied: vendor/openbsm/1.2_alpha4/man/Makefile.in (from rev 11163, vendor/openbsm/dist/man/Makefile.in)
===================================================================
--- vendor/openbsm/1.2_alpha4/man/Makefile.in (rev 0)
+++ vendor/openbsm/1.2_alpha4/man/Makefile.in 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,541 @@
+# Makefile.in generated by automake 1.12.2 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2012 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+ at SET_MAKE@
+VPATH = @srcdir@
+am__make_dryrun = \
+ { \
+ am__dry=no; \
+ case $$MAKEFLAGS in \
+ *\\[\ \ ]*) \
+ echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
+ | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+ *) \
+ for am__flg in $$MAKEFLAGS; do \
+ case $$am__flg in \
+ *=*|--*) ;; \
+ *n*) am__dry=yes; break;; \
+ esac; \
+ done;; \
+ esac; \
+ test $$am__dry = yes; \
+ }
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+subdir = man
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+SOURCES =
+DIST_SOURCES =
+am__can_run_installinfo = \
+ case $$AM_UPDATE_INFO_DIR in \
+ n|no|NO) false;; \
+ *) (install-info --version) >/dev/null 2>&1;; \
+ esac
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+ *) f=$$p;; \
+ esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+ if (++n[$$2] == $(am__install_max)) \
+ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+ END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+ test -z "$$files" \
+ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+ $(am__cd) "$$dir" && rm -f $$files; }; \
+ }
+man2dir = $(mandir)/man2
+am__installdirs = "$(DESTDIR)$(man2dir)" "$(DESTDIR)$(man5dir)"
+man5dir = $(mandir)/man5
+NROFF = nroff
+MANS = $(man2_MANS) $(man5_MANS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LEX = @LEX@
+LEXLIB = @LEXLIB@
+LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MIG = @MIG@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+VERSION = @VERSION@
+YACC = @YACC@
+YFLAGS = @YFLAGS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+man2_MANS = \
+ audit.2 \
+ auditctl.2 \
+ auditon.2 \
+ getaudit.2 \
+ getauid.2 \
+ setaudit.2 \
+ setauid.2
+
+man5_MANS = \
+ audit.log.5 \
+ audit_class.5 \
+ audit_control.5 \
+ audit_event.5 \
+ audit_user.5 \
+ audit_warn.5
+
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+ && { if test -f $@; then exit 0; else break; fi; }; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign man/Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --foreign man/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+
+mostlyclean-libtool:
+ -rm -f *.lo
+
+clean-libtool:
+ -rm -rf .libs _libs
+install-man2: $(man2_MANS)
+ @$(NORMAL_INSTALL)
+ @list1='$(man2_MANS)'; \
+ list2=''; \
+ test -n "$(man2dir)" \
+ && test -n "`echo $$list1$$list2`" \
+ || exit 0; \
+ echo " $(MKDIR_P) '$(DESTDIR)$(man2dir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(man2dir)" || exit 1; \
+ { for i in $$list1; do echo "$$i"; done; \
+ if test -n "$$list2"; then \
+ for i in $$list2; do echo "$$i"; done \
+ | sed -n '/\.2[a-z]*$$/p'; \
+ fi; \
+ } | while read p; do \
+ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; echo "$$p"; \
+ done | \
+ sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^2][0-9a-z]*$$,2,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+ sed 'N;N;s,\n, ,g' | { \
+ list=; while read file base inst; do \
+ if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man2dir)/$$inst'"; \
+ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man2dir)/$$inst" || exit $$?; \
+ fi; \
+ done; \
+ for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+ while read files; do \
+ test -z "$$files" || { \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man2dir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(man2dir)" || exit $$?; }; \
+ done; }
+
+uninstall-man2:
+ @$(NORMAL_UNINSTALL)
+ @list='$(man2_MANS)'; test -n "$(man2dir)" || exit 0; \
+ files=`{ for i in $$list; do echo "$$i"; done; \
+ } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^2][0-9a-z]*$$,2,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+ dir='$(DESTDIR)$(man2dir)'; $(am__uninstall_files_from_dir)
+install-man5: $(man5_MANS)
+ @$(NORMAL_INSTALL)
+ @list1='$(man5_MANS)'; \
+ list2=''; \
+ test -n "$(man5dir)" \
+ && test -n "`echo $$list1$$list2`" \
+ || exit 0; \
+ echo " $(MKDIR_P) '$(DESTDIR)$(man5dir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(man5dir)" || exit 1; \
+ { for i in $$list1; do echo "$$i"; done; \
+ if test -n "$$list2"; then \
+ for i in $$list2; do echo "$$i"; done \
+ | sed -n '/\.5[a-z]*$$/p'; \
+ fi; \
+ } | while read p; do \
+ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; echo "$$p"; \
+ done | \
+ sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^5][0-9a-z]*$$,5,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+ sed 'N;N;s,\n, ,g' | { \
+ list=; while read file base inst; do \
+ if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man5dir)/$$inst'"; \
+ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man5dir)/$$inst" || exit $$?; \
+ fi; \
+ done; \
+ for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+ while read files; do \
+ test -z "$$files" || { \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man5dir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(man5dir)" || exit $$?; }; \
+ done; }
+
+uninstall-man5:
+ @$(NORMAL_UNINSTALL)
+ @list='$(man5_MANS)'; test -n "$(man5dir)" || exit 0; \
+ files=`{ for i in $$list; do echo "$$i"; done; \
+ } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^5][0-9a-z]*$$,5,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+ dir='$(DESTDIR)$(man5dir)'; $(am__uninstall_files_from_dir)
+tags: TAGS
+TAGS:
+
+ctags: CTAGS
+CTAGS:
+
+cscope cscopelist:
+
+
+distdir: $(DISTFILES)
+ @list='$(MANS)'; if test -n "$$list"; then \
+ list=`for p in $$list; do \
+ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+ if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
+ if test -n "$$list" && \
+ grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
+ echo "error: found man pages containing the 'missing help2man' replacement text:" >&2; \
+ grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \
+ echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \
+ echo " typically 'make maintainer-clean' will remove them" >&2; \
+ exit 1; \
+ else :; fi; \
+ else :; fi
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+ else \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+check: check-am
+all-am: Makefile $(MANS)
+installdirs:
+ for dir in "$(DESTDIR)$(man2dir)" "$(DESTDIR)$(man5dir)"; do \
+ test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+ done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+ if test -z '$(STRIP)'; then \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ install; \
+ else \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+ fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-am
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-man
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am:
+ @$(NORMAL_INSTALL)
+ $(MAKE) $(AM_MAKEFLAGS) install-exec-hook
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man: install-man2 install-man5
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-man
+
+uninstall-man: uninstall-man2 uninstall-man5
+
+.MAKE: install-am install-exec-am install-strip
+
+.PHONY: all all-am check check-am clean clean-generic clean-libtool \
+ distclean distclean-generic distclean-libtool distdir dvi \
+ dvi-am html html-am info info-am install install-am \
+ install-data install-data-am install-dvi install-dvi-am \
+ install-exec install-exec-am install-exec-hook install-html \
+ install-html-am install-info install-info-am install-man \
+ install-man2 install-man5 install-pdf install-pdf-am \
+ install-ps install-ps-am install-strip installcheck \
+ installcheck-am installdirs maintainer-clean \
+ maintainer-clean-generic mostlyclean mostlyclean-generic \
+ mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am \
+ uninstall-man uninstall-man2 uninstall-man5
+
+
+install-exec-hook:
+ cd $(DESTDIR)$(mandir) && \
+ $(LN_S) -f getaudit.2 getaudit_addr.2 && \
+ $(LN_S) -f setaudit.2 setaudit_addr.2
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
Deleted: vendor/openbsm/1.2_alpha4/man/audit.2
===================================================================
--- vendor/openbsm/dist/man/audit.2 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/man/audit.2 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,104 +0,0 @@
-.\"-
-.\" Copyright (c) 2005 Tom Rhodes
-.\" Copyright (c) 2005 Robert N. M. Watson
-.\" All rights reserved.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\" notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\" notice, this list of conditions and the following disclaimer in the
-.\" documentation and/or other materials provided with the distribution.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
-.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-.\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
-.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-.\" SUCH DAMAGE.
-.\"
-.\" $P4: //depot/projects/trustedbsd/openbsm/man/audit.2#8 $
-.\"
-.Dd April 19, 2005
-.Dt AUDIT 2
-.Os
-.Sh NAME
-.Nm audit
-.Nd "commit BSM audit record to audit log"
-.Sh SYNOPSIS
-.In bsm/audit.h
-.Ft int
-.Fn audit "const char *record" "u_int length"
-.Sh DESCRIPTION
-The
-.Fn audit
-system call
-submits a completed BSM audit record to the system audit log.
-.Pp
-The
-.Fa record
-argument
-is a pointer to the specific event to be recorded and
-.Fa length
-is the size in bytes of the data to be written.
-.Sh RETURN VALUES
-.Rv -std
-.Sh ERRORS
-The
-.Fn audit
-system call will fail and the data never written if:
-.Bl -tag -width Er
-.It Bq Er EFAULT
-The
-.Fa record
-argument is beyond the allocated address space of the process.
-.It Bq Er EINVAL
-The token ID is invalid or
-.Va length
-is larger than
-.Dv MAXAUDITDATA .
-.It Bq Er EPERM
-The process does not have sufficient permission to complete
-the operation.
-.El
-.Sh SEE ALSO
-.Xr auditon 2 ,
-.Xr getaudit 2 ,
-.Xr getaudit_addr 2 ,
-.Xr getauid 2 ,
-.Xr setaudit 2 ,
-.Xr setaudit_addr 2 ,
-.Xr setauid 2 ,
-.Xr libbsm 3
-.Sh HISTORY
-The OpenBSM implementation was created by McAfee Research, the security
-division of McAfee Inc., under contract to Apple Computer Inc.\& in 2004.
-It was subsequently adopted by the TrustedBSD Project as the foundation for
-the OpenBSM distribution.
-.Sh AUTHORS
-.An -nosplit
-This software was created by McAfee Research, the security research division
-of McAfee, Inc., under contract to Apple Computer Inc.
-Additional authors include
-.An Wayne Salamon ,
-.An Robert Watson ,
-and SPARTA Inc.
-.Pp
-The Basic Security Module (BSM) interface to audit records and audit event
-stream format were defined by Sun Microsystems.
-.Pp
-This manual page was written by
-.An Tom Rhodes Aq trhodes at FreeBSD.org .
-.Sh BUGS
-The
-.Fx
-kernel does not fully validate that the argument passed is syntactically
-valid BSM.
-Submitting invalid audit records may corrupt the audit log.
Copied: vendor/openbsm/1.2_alpha4/man/audit.2 (from rev 11163, vendor/openbsm/dist/man/audit.2)
===================================================================
--- vendor/openbsm/1.2_alpha4/man/audit.2 (rev 0)
+++ vendor/openbsm/1.2_alpha4/man/audit.2 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,102 @@
+.\"-
+.\" Copyright (c) 2005 Tom Rhodes
+.\" Copyright (c) 2005 Robert N. M. Watson
+.\" All rights reserved.
+.\"
+.\" Redistribution and use in source and binary forms, with or without
+.\" modification, are permitted provided that the following conditions
+.\" are met:
+.\" 1. Redistributions of source code must retain the above copyright
+.\" notice, this list of conditions and the following disclaimer.
+.\" 2. Redistributions in binary form must reproduce the above copyright
+.\" notice, this list of conditions and the following disclaimer in the
+.\" documentation and/or other materials provided with the distribution.
+.\"
+.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+.\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+.\" SUCH DAMAGE.
+.\"
+.Dd April 19, 2005
+.Dt AUDIT 2
+.Os
+.Sh NAME
+.Nm audit
+.Nd "commit BSM audit record to audit log"
+.Sh SYNOPSIS
+.In bsm/audit.h
+.Ft int
+.Fn audit "const char *record" "u_int length"
+.Sh DESCRIPTION
+The
+.Fn audit
+system call
+submits a completed BSM audit record to the system audit log.
+.Pp
+The
+.Fa record
+argument
+is a pointer to the specific event to be recorded and
+.Fa length
+is the size in bytes of the data to be written.
+.Sh RETURN VALUES
+.Rv -std
+.Sh ERRORS
+The
+.Fn audit
+system call will fail and the data never written if:
+.Bl -tag -width Er
+.It Bq Er EFAULT
+The
+.Fa record
+argument is beyond the allocated address space of the process.
+.It Bq Er EINVAL
+The token ID is invalid or
+.Va length
+is larger than
+.Dv MAXAUDITDATA .
+.It Bq Er EPERM
+The process does not have sufficient permission to complete
+the operation.
+.El
+.Sh SEE ALSO
+.Xr auditon 2 ,
+.Xr getaudit 2 ,
+.Xr getaudit_addr 2 ,
+.Xr getauid 2 ,
+.Xr setaudit 2 ,
+.Xr setaudit_addr 2 ,
+.Xr setauid 2 ,
+.Xr libbsm 3
+.Sh HISTORY
+The OpenBSM implementation was created by McAfee Research, the security
+division of McAfee Inc., under contract to Apple Computer Inc.\& in 2004.
+It was subsequently adopted by the TrustedBSD Project as the foundation for
+the OpenBSM distribution.
+.Sh AUTHORS
+.An -nosplit
+This software was created by McAfee Research, the security research division
+of McAfee, Inc., under contract to Apple Computer Inc.
+Additional authors include
+.An Wayne Salamon ,
+.An Robert Watson ,
+and SPARTA Inc.
+.Pp
+The Basic Security Module (BSM) interface to audit records and audit event
+stream format were defined by Sun Microsystems.
+.Pp
+This manual page was written by
+.An Tom Rhodes Aq trhodes at FreeBSD.org .
+.Sh BUGS
+The
+.Fx
+kernel does not fully validate that the argument passed is syntactically
+valid BSM.
+Submitting invalid audit records may corrupt the audit log.
Deleted: vendor/openbsm/1.2_alpha4/man/audit.log.5
===================================================================
--- vendor/openbsm/dist/man/audit.log.5 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/man/audit.log.5 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,682 +0,0 @@
-.\"-
-.\" Copyright (c) 2005-2006 Robert N. M. Watson
-.\" All rights reserved.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\" notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\" notice, this list of conditions and the following disclaimer in the
-.\" documentation and/or other materials provided with the distribution.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
-.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-.\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
-.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-.\" SUCH DAMAGE.
-.\"
-.\" $P4: //depot/projects/trustedbsd/openbsm/man/audit.log.5#16 $
-.\"
-.Dd November 5, 2006
-.Dt AUDIT.LOG 5
-.Os
-.Sh NAME
-.Nm audit
-.Nd "Basic Security Module (BSM) file format"
-.Sh DESCRIPTION
-The
-.Nm
-file format is based on Sun's Basic Security Module (BSM) file format, a
-token-based record stream to represent system audit data.
-This file format is both flexible and extensible, able to describe a broad
-range of data types, and easily extended to describe new data types in a
-moderately backward and forward compatible way.
-.Pp
-BSM token streams typically begin and end with a
-.Dq file
-token, which provides time stamp and file name information for the stream;
-when processing a BSM token stream from a stream as opposed to a single file
-source, file tokens may be seen at any point between ordinary records
-identifying when particular parts of the stream begin and end.
-All other tokens will appear in the context of a complete BSM audit record,
-which begins with a
-.Dq header
-token, and ends with a
-.Dq trailer
-token, which describe the audit record.
-Between these two tokens will appear a variety of data tokens, such as
-process information, file path names, IPC object information, MAC labels,
-socket information, and so on.
-.Pp
-The BSM file format defines specific token orders for each record event type;
-however, some variation may occur depending on the operating system in use,
-what system options, such as mandatory access control, are present.
-.Pp
-This manual page documents the common token types and their binary format, and
-is intended for reference purposes only.
-It is recommended that application programmers use the
-.Xr libbsm 3
-interface to read and write tokens, rather than parsing or constructing
-records by hand.
-.Ss File Token
-The
-.Dq file
-token is used at the beginning and end of an audit log file to indicate
-when the audit log begins and ends.
-It includes a pathname so that, if concatenated together, original file
-boundaries are still observable, and gaps in the audit log can be identified.
-A
-.Dq file
-token can be created using
-.Xr au_to_file 3 .
-.Bl -column -offset 3n ".No Terminal Address Type/Length" ".No N bytes + 1 NUL"
-.It Sy "Field Bytes Description"
-.It "Token ID 1 byte Token ID"
-.It "Seconds 4 bytes File time stamp"
-.It "Microseconds 4 bytes File time stamp"
-.It "File name lengh 2 bytes File name of audit trail"
-.It "File pathname N bytes + 1 NUL File name of audit trail"
-.El
-.Ss Header Token
-The
-.Dq header
-token is used to mark the beginning of a complete audit record, and includes
-the length of the total record in bytes, a version number for the record
-layout, the event type and subtype, and the time at which the event occurred.
-A 32-bit
-.Dq header
-token can be created using
-.Xr au_to_header32 3 ;
-a 64-bit
-.Dq header
-token can be created using
-.Xr au_to_header64 3 .
-.Bl -column -offset 3n ".No Terminal Address Type/Length" ".No N bytes + 1 NUL"
-.It Sy "Field Bytes Description"
-.It "Token ID 1 byte Token ID"
-.It "Record Byte Count 4 bytes Number of bytes in record"
-.It "Version Number 2 bytes Record version number"
-.It "Event Type 2 bytes Event type"
-.It "Event Modifier 2 bytes Event sub-type"
-.It "Seconds 4/8 bytes Record time stamp (32/64-bits)"
-.It "Nanoseconds 4/8 bytes Record time stamp (32/64-bits)"
-.El
-.Ss Expanded Header Token
-The
-.Dq expanded header
-token is an expanded version of the
-.Dq header
-token, with the addition of a machine IPv4 or IPv6 address.
-A 32-bit extended
-.Dq header
-token can be created using
-.Xr au_to_header32_ex 3 ;
-a 64-bit extended
-.Dq header
-token can be created using
-.Xr au_to_header64_ex 3 .
-.Bl -column -offset 3n ".No Terminal Address Type/Length" ".No N bytes + 1 NUL"
-.It Sy "Field Bytes Description"
-.It "Token ID 1 byte Token ID"
-.It "Record Byte Count 4 bytes Number of bytes in record"
-.It "Version Number 2 bytes Record version number"
-.It "Event Type 2 bytes Event type"
-.It "Event Modifier 2 bytes Event sub-type"
-.It "Address Type/Length 1 byte Host address type and length"
-.It "Machine Address 4/16 bytes IPv4 or IPv6 address"
-.It "Seconds 4/8 bytes Record time stamp (32/64-bits)"
-.It "Nanoseconds 4/8 bytes Record time stamp (32/64-bits)"
-.El
-.Ss Trailer Token
-The
-.Dq trailer
-terminates a BSM audit record, and contains a magic number,
-.Dv TRAILER_PAD_MAGIC
-and length that can be used to validate that the record was read properly.
-A
-.Dq trailer
-token can be created using
-.Xr au_to_trailer 3 .
-.Bl -column -offset 3n ".No Terminal Address Type/Length" ".No N bytes + 1 NUL"
-.It Sy "Field Bytes Description"
-.It "Token ID 1 byte Token ID"
-.It "Trailer Magic 2 bytes Trailer magic number"
-.It "Record Byte Count 4 bytes Number of bytes in record"
-.El
-.Ss Arbitrary Data Token
-The
-.Dq arbitrary data
-token contains a byte stream of opaque (untyped) data.
-The size of the data is calculated as the size of each unit of data
-multipled by the number of units of data.
-A
-.Dq How to print
-field is present to specify how to print the data, but interpretation of
-that field is not currently defined.
-An
-.Dq arbitrary data
-token can be created using
-.Xr au_to_data 3 .
-.Bl -column -offset 3n ".No Terminal Address Type/Length" ".No N bytes + 1 NUL"
-.It Sy "Field Bytes Description"
-.It "Token ID 1 byte Token ID"
-.It "How to Print 1 byte User-defined printing information"
-.It "Basic Unit 1 byte Size of a unit in bytes"
-.It "Unit Count 1 byte Number of units of data present"
-.It "Data Items Variable User data"
-.El
-.Ss in_addr Token
-The
-.Dq in_addr
-token holds a network byte order IPv4 or IPv6 address.
-An
-.Dq in_addr
-token can be created using
-.Xr au_to_in_addr 3
-for an IPv4 address, or
-.Xr au_to_in_addr_ex 3
-for an IPv6 address.
-.Pp
-See the
-.Sx BUGS
-section for information on the storage of this token.
-.Pp
-.Bl -column -offset 3n ".No Terminal Address Type/Length" ".No N bytes + 1 NUL"
-.It Sy "Field Bytes Description"
-.It "Token ID 1 byte Token ID"
-.It "IP Address Type 1 byte Type of address"
-.It "IP Address 4/16 bytes IPv4 or IPv6 address"
-.El
-.Ss Expanded in_addr Token
-The
-.Dq expanded in_addr
-token ...
-.Pp
-See the
-.Sx BUGS
-section for information on the storage of this token.
-.Bl -column -offset 3n ".No Terminal Address Type/Length" ".No N bytes + 1 NUL"
-.It Sy "Field Bytes Description"
-.It "Token ID 1 byte Token ID"
-.It XXXX
-.El
-.Ss ip Token
-The
-.Dq ip
-token contains an IP packet header in network byte order.
-An
-.Dq ip
-token can be created using
-.Xr au_to_ip 3 .
-.Bl -column -offset 3n ".No Terminal Address Type/Length" ".No N bytes + 1 NUL"
-.It Sy "Field Bytes Description"
-.It "Token ID 1 byte Token ID"
-.It "Version and IHL 1 byte Version and IP header length"
-.It "Type of Service 1 byte IP TOS field"
-.It "Length 2 bytes IP packet length in network byte order"
-.It "ID 2 bytes IP header ID for reassembly"
-.It "Offset 2 bytes IP fragment offset and flags, network byte order"
-.It "TTL 1 byte IP Time-to-Live"
-.It "Protocol 1 byte IP protocol number"
-.It "Checksum 2 bytes IP header checksum, network byte order"
-.It "Source Address 4 bytes IPv4 source address"
-.It "Destination Address 4 bytes IPv4 destination address"
-.El
-.Ss Expanded ip Token
-The
-.Dq expanded ip
-token ...
-.Bl -column -offset 3n ".No Terminal Address Type/Length" ".No N bytes + 1 NUL"
-.It Sy "Field Bytes Description"
-.It "Token ID 1 byte Token ID"
-.It XXXX
-.El
-.Ss iport Token
-The
-.Dq iport
-token stores an IP port number in network byte order.
-An
-.Dq iport
-token can be created using
-.Xr au_to_iport 3 .
-.Bl -column -offset 3n ".No Terminal Address Type/Length" ".No N bytes + 1 NUL"
-.It Sy "Field Bytes Description"
-.It "Token ID 1 byte Token ID"
-.It "Port Number 2 bytes Port number in network byte order"
-.El
-.Ss Path Token
-The
-.Dq path
-token contains a pathname.
-A
-.Dq path
-token can be created using
-.Xr au_to_path 3 .
-.Bl -column -offset 3n ".No Terminal Address Type/Length" ".No N bytes + 1 NUL"
-.It Sy "Field Bytes Description"
-.It "Token ID 1 byte Token ID"
-.It "Path Length 2 bytes Length of path in bytes"
-.It "Path N bytes + 1 NUL Path name"
-.El
-.Ss path_attr Token
-The
-.Dq path_attr
-token contains a set of NUL-terminated path names.
-The
-.Xr libbsm 3
-API cannot currently create a
-.Dq path_attr
-token.
-.Bl -column -offset 3n ".No Terminal Address Type/Length" ".No N bytes + 1 NUL"
-.It Sy "Field Bytes Description"
-.It "Token ID 1 byte Token ID"
-.It "Count 2 bytes Number of NUL-terminated string(s) in token"
-.It "Path Variable count NUL-terminated string(s)"
-.El
-.Ss Process Token
-The
-.Dq process
-token contains a description of the security properties of a process
-involved as the target of an auditable event, such as the destination for
-signal delivery.
-It should not be confused with the
-.Dq subject
-token, which describes the subject performing an auditable event.
-This includes both the traditional
-.Ux
-security properties, such as user IDs and group IDs, but also audit
-information such as the audit user ID and session.
-A
-.Dq process
-token can be created using
-.Xr au_to_process32 3
-or
-.Xr au_to_process64 3 .
-.Bl -column -offset 3n ".No Terminal Address Type/Length" ".No N bytes + 1 NUL"
-.It Sy "Field Bytes Description"
-.It "Token ID 1 byte Token ID"
-.It "Audit ID 4 bytes Audit user ID"
-.It "Effective User ID 4 bytes Effective user ID"
-.It "Effective Group ID 4 bytes Effective group ID"
-.It "Real User ID 4 bytes Real user ID"
-.It "Real Group ID 4 bytes Real group ID"
-.It "Process ID 4 bytes Process ID"
-.It "Session ID 4 bytes Audit session ID"
-.It "Terminal Port ID 4/8 bytes Terminal port ID (32/64-bits)"
-.It "Terminal Machine Address 4 bytes IP address of machine"
-.El
-.Ss Expanded Process Token
-The
-.Dq expanded process
-token contains the contents of the
-.Dq process
-token, with the addition of a machine address type and variable length
-address storage capable of containing IPv6 addresses.
-An
-.Dq expanded process
-token can be created using
-.Xr au_to_process32_ex 3
-or
-.Xr au_to_process64_ex 3 .
-.Bl -column -offset 3n ".No Terminal Address Type/Length" ".No N bytes + 1 NUL"
-.It Sy "Field Bytes Description"
-.It "Token ID 1 byte Token ID"
-.It "Audit ID 4 bytes Audit user ID"
-.It "Effective User ID 4 bytes Effective user ID"
-.It "Effective Group ID 4 bytes Effective group ID"
-.It "Real User ID 4 bytes Real user ID"
-.It "Real Group ID 4 bytes Real group ID"
-.It "Process ID 4 bytes Process ID"
-.It "Session ID 4 bytes Audit session ID"
-.It "Terminal Port ID 4/8 bytes Terminal port ID (32/64-bits)"
-.It "Terminal Address Type/Length 1 byte Length of machine address"
-.It "Terminal Machine Address 4 bytes IPv4 or IPv6 address of machine"
-.El
-.Ss Return Token
-The
-.Dq return
-token contains a system call or library function return condition, including
-return value and error number associated with the global variable
-.Er errno .
-A
-.Dq return
-token can be created using
-.Xr au_to_return32 3
-or
-.Xr au_to_return64 3 .
-.Bl -column -offset 3n ".No Terminal Address Type/Length" ".No N bytes + 1 NUL"
-.It Sy "Field Bytes Description"
-.It "Token ID 1 byte Token ID"
-.It "Error Number 1 byte Errno value, or 0 if undefined"
-.It "Return Value 4/8 bytes Return value (32/64-bits)"
-.El
-.Ss Subject Token
-The
-.Dq subject
-token contains information on the subject performing the operation described
-by an audit record, and includes similar information to that found in the
-.Dq process
-and
-.Dq expanded process
-tokens.
-However, those tokens are used where the process being described is the
-target of the operation, not the authorizing party.
-A
-.Dq subject
-token can be created using
-.Xr au_to_subject32 3
-and
-.Xr au_to_subject64 3 .
-.Bl -column -offset 3n ".No Terminal Address Type/Length" ".No N bytes + 1 NUL"
-.It Sy "Field Bytes Description"
-.It "Token ID 1 byte Token ID"
-.It "Audit ID 4 bytes Audit user ID"
-.It "Effective User ID 4 bytes Effective user ID"
-.It "Effective Group ID 4 bytes Effective group ID"
-.It "Real User ID 4 bytes Real user ID"
-.It "Real Group ID 4 bytes Real group ID"
-.It "Process ID 4 bytes Process ID"
-.It "Session ID 4 bytes Audit session ID"
-.It "Terminal Port ID 4/8 bytes Terminal port ID (32/64-bits)"
-.It "Terminal Machine Address 4 bytes IP address of machine"
-.El
-.Ss Expanded Subject Token
-The
-.Dq expanded subject
-token consists of the same elements as the
-.Dq subject
-token, with the addition of type/length and variable size machine address
-information in the terminal ID.
-An
-.Dq expanded subject
-token can be created using
-.Xr au_to_subject32_ex 3
-or
-.Xr au_to_subject64_ex 3 .
-.Bl -column -offset 3n ".No Terminal Address Type/Length" ".No N bytes + 1 NUL"
-.It Sy "Field Bytes Description"
-.It "Token ID 1 byte Token ID"
-.It "Audit ID 4 bytes Audit user ID"
-.It "Effective User ID 4 bytes Effective user ID"
-.It "Effective Group ID 4 bytes Effective group ID"
-.It "Real User ID 4 bytes Real user ID"
-.It "Real Group ID 4 bytes Real group ID"
-.It "Process ID 4 bytes Process ID"
-.It "Session ID 4 bytes Audit session ID"
-.It "Terminal Port ID 4/8 bytes Terminal port ID (32/64-bits)"
-.It "Terminal Address Type/Length 1 byte Length of machine address"
-.It "Terminal Machine Address 4 bytes IPv4 or IPv6 address of machine"
-.El
-.Ss System V IPC Token
-The
-.Dq System V IPC
-token contains the System V IPC message handle, semaphore handle or shared
-memory handle.
-A System V IPC token may be created using
-+.Xr au_to_ipc 3 .
-.Bl -column -offset 3n ".No Terminal Address Type/Length" ".No N bytes + 1 NUL"
-.It Sy "Field Bytes Description"
-.It "Token ID 1 byte Token ID"
-.It "Object ID type 1 byte Object ID"
-.It "Object ID 4 bytes Object ID"
-.El
-.Ss Text Token
-The
-.Dq text
-token contains a single NUL-terminated text string.
-A
-.Dq text
-token may be created using
-.Xr au_to_text 3 .
-.Bl -column -offset 3n ".No Terminal Address Type/Length" ".No N bytes + 1 NUL"
-.It Sy "Field Bytes Description"
-.It "Token ID 1 byte Token ID"
-.It "Text Length 2 bytes Length of text string including NUL"
-.It "Text N bytes + 1 NUL Text string including NUL"
-.El
-.Ss Attribute Token
-The
-.Dq attribute
-token describes the attributes of a file associated with the audit event.
-As files may be identified by 0, 1, or many path names, a path name is not
-included with the attribute block for a file; optional
-.Dq path
-tokens may also be present in an audit record indicating which path, if any,
-was used to reach the object.
-An
-.Dq attribute
-token can be created using
-.Xr au_to_attr32 3
-or
-.Xr au_to_attr64 3 .
-.Bl -column -offset 3n ".No Terminal Address Type/Length" ".No N bytes + 1 NUL"
-.It Sy "Field Bytes Description"
-.It "Token ID 1 byte Token ID"
-.It "File Access Mode 1 byte mode_t associated with file"
-.It "Owner User ID 4 bytes uid_t associated with file"
-.It "Owner Group ID 4 bytes gid_t associated with file"
-.It "File System ID 4 bytes fsid_t associated with file"
-.It "File System Node ID 8 bytes ino_t associated with file"
-.It "Device 4/8 bytes Device major/minor number (32/64-bit)"
-.El
-.Ss Groups Token
-The
-.Dq groups
-token contains a list of group IDs associated with the audit event.
-A
-.Dq groups
-token can be created using
-.Xr au_to_groups 3 .
-.Bl -column -offset 3n ".No Terminal Address Type/Length" ".No N bytes + 1 NUL"
-.It Sy "Field Bytes Description"
-.It "Token ID 1 byte Token ID"
-.It "Number of Groups 2 bytes Number of groups in token"
-.It "Group List N * 4 bytes List of N group IDs"
-.El
-.Ss System V IPC Permission Token
-The
-.Dq System V IPC permission
-token contains a System V IPC access permissions.
-A System V IPC permission token may be created using
-.Xr au_to_ipc_perm 3 .
-.Bl -column -offset 3n ".No Terminal Address Type/Length" ".No N bytes + 1 NUL"
-.It Sy "Field Bytes Description"
-.It "Token ID 1 byte Token ID"
-.It Li "Owner user ID" Ta "4 bytes" Ta "User ID of IPC owner"
-.It Li "Owner group ID" Ta "4 bytes" Ta "Group ID of IPC owner"
-.It Li "Creator user ID" Ta "4 bytes" Ta "User ID of IPC creator"
-.It Li "Creator group ID" Ta "4 bytes" Ta "Group ID of IPC creator"
-.It Li "Access mode" Ta "4 bytes" Ta "Access mode"
-.It Li "Sequnce number" Ta "4 bytes" Ta "Sequnce number"
-.It Li "Key" Ta "4 bytes" Ta "IPC key"
-.El
-.Ss Arg Token
-The
-.Dq arg
-token contains informations about arguments of the system call.
-Depending on the size of the desired argument value, an Arg token may be
-created using
-.Xr au_to_arg32 3
-or
-.Xr au_to_arg64 3 .
-.Bl -column -offset 3n ".No Terminal Address Type/Length" ".No N bytes + 1 NUL"
-.It Sy "Field Bytes Description"
-.It "Token ID 1 byte Token ID"
-.It Li "Argument ID" Ta "1 byte" Ta "Argument ID"
-.It Li "Argument value" Ta "4/8 bytes" Ta "Argument value"
-.It Li "Length" Ta "2 bytes" Ta "Length of the text"
-.It Li "Text" Ta "N bytes + 1 nul" Ta "The string including nul"
-.El
-.Ss exec_args Token
-The
-.Dq exec_args
-token contains informations about arguements of the exec() system call.
-An exec_args token may be created using
-.Xr au_to_exec_args 3 .
-.Bl -column -offset 3n ".No Terminal Address Type/Length" ".No N bytes + 1 NUL"
-.It Sy "Field Bytes Description"
-.It "Token ID 1 byte Token ID"
-.It Li "Count" Ta "4 bytes" Ta "Number of arguments"
-.It Li "Text" Ta "* bytes" Ta "Count null-terminated strings"
-.El
-.Ss exec_env Token
-The
-.Dq exec_env
-token contains current eviroment variables to an exec() system call.
-An exec_args token may be created using
-.Xr au_to_exec_env 3 .
-.Bl -column -offset 3n ".No Terminal Address Type/Length" ".No N bytes + 1 NUL"
-.It Sy "Field Bytes Description"
-.It "Token ID 1 byte Token ID"
-.It Li "Count ID" Ta "4 bytes" Ta "Number of variables"
-.It Li "Text" Ta "* bytes" Ta "Count nul-terminated strings"
-.El
-.Ss Exit Token
-The
-.Dq exit
-token contains process exit/return code information.
-An
-.Dq exit
-token can be created using
-.Xr au_to_exit 3 .
-.Bl -column -offset 3n ".No Terminal Address Type/Length" ".No N bytes + 1 NUL"
-.It Sy "Field Bytes Description"
-.It "Token ID 1 byte Token ID"
-.It "Status 4 bytes Process status on exit"
-.It "Return Value 4 bytes Process return value on exit"
-.El
-.Ss Socket Token
-The
-.Dq socket
-token contains informations about UNIX domain and Internet sockets.
-Each token has four or eight fields.
-Depend on type of socket a socket token may be created using
-.Xr au_to_sock_unix 3 ,
-.Xr au_to_sock_inet32 3 or
-.Xr au_to_sock_inet128 3 .
-.Bl -column -offset ind ".Sy Field Name Width XX" ".Sy XX Bytes XXXX" ".Sy Description"
-.It Sy "Field" Ta Sy Bytes Ta Sy Description
-.It Li "Token ID" Ta "1 byte" Ta "Token ID"
-.It Li "Socket family" Ta "2 bytes" Ta "Socket family"
-.It Li "Local port" Ta "2 bytes" Ta "Local port"
-.It Li "Socket address" Ta "4 bytes" Ta "Socket address"
-.El
-.Bl -column -offset 3n ".No Terminal Address Type/Length" ".No N bytes + 1 NUL"
-.It Sy "Field Bytes Description"
-.It "Token ID 1 byte Token ID"
-+.It Li "Socket domain" Ta "4 bytes" Ta "Socket domain"
-+.It Li "Socket family" Ta "2 bytes" Ta "Socket family"
-+.It Li "Address type" Ta "1 byte" Ta "Address type (IPv4/IPv6)"
-+.It Li "Local port" Ta "2 bytes" Ta "Local port"
-+.It Li "Local IP address" Ta "4/16 bytes" Ta "Local IP address"
-+.It Li "Remote port" Ta "2 bytes" Ta "Remote port"
-+.It Li "Remote IP address" Ta "4/16 bytes" Ta "Remote IP address"
-.El
-.Ss Expanded Socket Token
-The
-.Dq expanded socket
-token ...
-.Bl -column -offset 3n ".No Terminal Address Type/Length" ".No N bytes + 1 NUL"
-.It Sy "Field Bytes Description"
-.It "Token ID 1 byte Token ID"
-.It XXXXX
-.El
-.Ss Seq Token
-The
-.Dq seq
-token contains a unique and monotonically increasing audit event sequence ID.
-Due to the limited range of 32 bits, serial number arithmetic and caution
-should be used when comparing sequence numbers.
-.Bl -column -offset 3n ".No Terminal Address Type/Length" ".No N bytes + 1 NUL"
-.It Sy "Field Bytes Description"
-.It "Token ID 1 byte Token ID"
-.It "Sequence Number 4 bytes Audit event sequence number"
-.El
-.Ss privilege Token
-The
-.Dq privilege
-token ...
-.Bl -column -offset 3n ".No Terminal Address Type/Length" ".No N bytes + 1 NUL"
-.It Sy "Field Bytes Description"
-.It "Token ID 1 byte Token ID"
-.It XXXXX
-.El
-.Ss Use-of-auth Token
-The
-.Dq use-of-auth
-token ...
-.Bl -column -offset 3n ".No Terminal Address Type/Length" ".No N bytes + 1 NUL"
-.It Sy "Field Bytes Description"
-.It "Token ID 1 byte Token ID"
-.It XXXXX
-.El
-.Ss Command Token
-The
-.Dq command
-token ...
-.Bl -column -offset 3n ".No Terminal Address Type/Length" ".No N bytes + 1 NUL"
-.It Sy "Field Bytes Description"
-.It "Token ID 1 byte Token ID"
-.It XXXXX
-.El
-.Ss ACL Token
-The
-.Dq ACL
-token ...
-.Bl -column -offset 3n ".No Terminal Address Type/Length" ".No N bytes + 1 NUL"
-.It Sy "Field Bytes Description"
-.It "Token ID 1 byte Token ID"
-.It XXXXX
-.El
-.Ss Zonename Token
-The
-.Dq zonename
-token ...
-.Bl -column -offset 3n ".No Terminal Address Type/Length" ".No N bytes + 1 NUL"
-.It Sy "Field Bytes Description"
-.It "Token ID 1 byte Token ID"
-.It XXXXX
-.El
-.Sh SEE ALSO
-.Xr auditreduce 1 ,
-.Xr praudit 1 ,
-.Xr libbsm 3 ,
-.Xr audit 4 ,
-.Xr auditpipe 4 ,
-.Xr audit 8
-.Sh HISTORY
-The OpenBSM implementation was created by McAfee Research, the security
-division of McAfee Inc., under contract to Apple Computer Inc.\& in 2004.
-It was subsequently adopted by the TrustedBSD Project as the foundation for
-the OpenBSM distribution.
-.Sh AUTHORS
-The Basic Security Module (BSM) interface to audit records and audit event
-stream format were defined by Sun Microsystems.
-.Pp
-This manual page was written by
-.An Robert Watson Aq rwatson at FreeBSD.org .
-.Sh BUGS
-The
-.Dq How to print
-field in the
-.Dq arbitrary data
-token has undefined values.
-.Pp
-The
-.Dq in_addr
-and
-.Dq in_addr_ex
-token layout documented here appears to be in conflict with the
-.Xr libbsm 3
-implementations of
-.Xr au_to_in_addr 3
-and
-.Xr au_to_in_addr_ex 3 .
Copied: vendor/openbsm/1.2_alpha4/man/audit.log.5 (from rev 11163, vendor/openbsm/dist/man/audit.log.5)
===================================================================
--- vendor/openbsm/1.2_alpha4/man/audit.log.5 (rev 0)
+++ vendor/openbsm/1.2_alpha4/man/audit.log.5 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,670 @@
+.\"-
+.\" Copyright (c) 2005-2006 Robert N. M. Watson
+.\" Copyright (c) 2008 Apple Inc.
+.\" All rights reserved.
+.\"
+.\" Redistribution and use in source and binary forms, with or without
+.\" modification, are permitted provided that the following conditions
+.\" are met:
+.\" 1. Redistributions of source code must retain the above copyright
+.\" notice, this list of conditions and the following disclaimer.
+.\" 2. Redistributions in binary form must reproduce the above copyright
+.\" notice, this list of conditions and the following disclaimer in the
+.\" documentation and/or other materials provided with the distribution.
+.\"
+.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+.\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+.\" SUCH DAMAGE.
+.\"
+.Dd November 5, 2006
+.Dt AUDIT.LOG 5
+.Os
+.Sh NAME
+.Nm audit
+.Nd "Basic Security Module (BSM) file format"
+.Sh DESCRIPTION
+The
+.Nm
+file format is based on Sun's Basic Security Module (BSM) file format, a
+token-based record stream to represent system audit data.
+This file format is both flexible and extensible, able to describe a broad
+range of data types, and easily extended to describe new data types in a
+moderately backward and forward compatible way.
+.Pp
+BSM token streams typically begin and end with a
+.Dq file
+token, which provides time stamp and file name information for the stream;
+when processing a BSM token stream from a stream as opposed to a single file
+source, file tokens may be seen at any point between ordinary records
+identifying when particular parts of the stream begin and end.
+All other tokens will appear in the context of a complete BSM audit record,
+which begins with a
+.Dq header
+token, and ends with a
+.Dq trailer
+token, which describe the audit record.
+Between these two tokens will appear a variety of data tokens, such as
+process information, file path names, IPC object information, MAC labels,
+socket information, and so on.
+.Pp
+The BSM file format defines specific token orders for each record event type;
+however, some variation may occur depending on the operating system in use,
+what system options, such as mandatory access control, are present.
+.Pp
+This manual page documents the common token types and their binary format, and
+is intended for reference purposes only.
+It is recommended that application programmers use the
+.Xr libbsm 3
+interface to read and write tokens, rather than parsing or constructing
+records by hand.
+.Ss File Token
+The
+.Dq file
+token is used at the beginning and end of an audit log file to indicate
+when the audit log begins and ends.
+It includes a pathname so that, if concatenated together, original file
+boundaries are still observable, and gaps in the audit log can be identified.
+A
+.Dq file
+token can be created using
+.Xr au_to_file 3 .
+.Bl -column -offset 3n ".No Terminal Address Type/Length" ".No N bytes + 1 NUL"
+.It Sy "Field Bytes Description"
+.It "Token ID 1 byte Token ID"
+.It "Seconds 4 bytes File time stamp"
+.It "Microseconds 4 bytes File time stamp"
+.It "File name length 2 bytes File name of audit trail"
+.It "File pathname N bytes + 1 NUL File name of audit trail"
+.El
+.Ss Header Token
+The
+.Dq header
+token is used to mark the beginning of a complete audit record, and includes
+the length of the total record in bytes, a version number for the record
+layout, the event type and subtype, and the time at which the event occurred.
+A 32-bit
+.Dq header
+token can be created using
+.Xr au_to_header32 3 ;
+a 64-bit
+.Dq header
+token can be created using
+.Xr au_to_header64 3 .
+.Bl -column -offset 3n ".No Terminal Address Type/Length" ".No N bytes + 1 NUL"
+.It Sy "Field Bytes Description"
+.It "Token ID 1 byte Token ID"
+.It "Record Byte Count 4 bytes Number of bytes in record"
+.It "Version Number 2 bytes Record version number"
+.It "Event Type 2 bytes Event type"
+.It "Event Modifier 2 bytes Event sub-type"
+.It "Seconds 4/8 bytes Record time stamp (32/64-bits)"
+.It "Nanoseconds 4/8 bytes Record time stamp (32/64-bits)"
+.El
+.Ss Expanded Header Token
+The
+.Dq expanded header
+token is an expanded version of the
+.Dq header
+token, with the addition of a machine IPv4 or IPv6 address.
+A 32-bit extended
+.Dq header
+token can be created using
+.Xr au_to_header32_ex 3 ;
+a 64-bit extended
+.Dq header
+token can be created using
+.Xr au_to_header64_ex 3 .
+.Bl -column -offset 3n ".No Terminal Address Type/Length" ".No N bytes + 1 NUL"
+.It Sy "Field Bytes Description"
+.It "Token ID 1 byte Token ID"
+.It "Record Byte Count 4 bytes Number of bytes in record"
+.It "Version Number 2 bytes Record version number"
+.It "Event Type 2 bytes Event type"
+.It "Event Modifier 2 bytes Event sub-type"
+.It "Address Type/Length 1 byte Host address type and length"
+.It "Machine Address 4/16 bytes IPv4 or IPv6 address"
+.It "Seconds 4/8 bytes Record time stamp (32/64-bits)"
+.It "Nanoseconds 4/8 bytes Record time stamp (32/64-bits)"
+.El
+.Ss Trailer Token
+The
+.Dq trailer
+terminates a BSM audit record, and contains a magic number,
+.Dv AUT_TRAILER_MAGIC
+and length that can be used to validate that the record was read properly.
+A
+.Dq trailer
+token can be created using
+.Xr au_to_trailer 3 .
+.Bl -column -offset 3n ".No Terminal Address Type/Length" ".No N bytes + 1 NUL"
+.It Sy "Field Bytes Description"
+.It "Token ID 1 byte Token ID"
+.It "Trailer Magic 2 bytes Trailer magic number"
+.It "Record Byte Count 4 bytes Number of bytes in record"
+.El
+.Ss Arbitrary Data Token
+The
+.Dq arbitrary data
+token contains a byte stream of opaque (untyped) data.
+The size of the data is calculated as the size of each unit of data
+multiplied by the number of units of data.
+A
+.Dq How to print
+field is present to specify how to print the data, but interpretation of
+that field is not currently defined.
+An
+.Dq arbitrary data
+token can be created using
+.Xr au_to_data 3 .
+.Bl -column -offset 3n ".No Terminal Address Type/Length" ".No N bytes + 1 NUL"
+.It Sy "Field Bytes Description"
+.It "Token ID 1 byte Token ID"
+.It "How to Print 1 byte User-defined printing information"
+.It "Basic Unit 1 byte Size of a unit in bytes"
+.It "Unit Count 1 byte Number of units of data present"
+.It "Data Items Variable User data"
+.El
+.Ss in_addr Token
+The
+.Dq in_addr
+token holds a network byte order IPv4 address.
+An
+.Dq in_addr
+token can be created using
+.Xr au_to_in_addr 3
+for an IPv4 address.
+.Bl -column -offset 3n ".No Terminal Address Type/Length" ".No N bytes + 1 NUL"
+.It Sy "Field Bytes Description"
+.It "Token ID 1 byte Token ID"
+.It "IP Address 4 bytes IPv4 address"
+.El
+.Ss Expanded in_addr Token
+The
+.Dq in_addr_ex
+token holds a network byte order IPv4 or IPv6 address.
+An
+.Dq in_addr_ex
+token can be created using
+.Xr au_to_in_addr_ex 3
+for an IPv6 address.
+.Pp
+See the
+.Sx BUGS
+section for information on the storage of this token.
+.Bl -column -offset 3n ".No Terminal Address Type/Length" ".No N bytes + 1 NUL"
+.It Sy "Field Bytes Description"
+.It "Token ID 1 byte Token ID"
+.It "IP Address Type 1 byte Type of address"
+.It "IP Address 4/16 bytes IPv4 or IPv6 address"
+.El
+.Ss ip Token
+The
+.Dq ip
+token contains an IP packet header in network byte order.
+An
+.Dq ip
+token can be created using
+.Xr au_to_ip 3 .
+.Bl -column -offset 3n ".No Terminal Address Type/Length" ".No N bytes + 1 NUL"
+.It Sy "Field Bytes Description"
+.It "Token ID 1 byte Token ID"
+.It "Version and IHL 1 byte Version and IP header length"
+.It "Type of Service 1 byte IP TOS field"
+.It "Length 2 bytes IP packet length in network byte order"
+.It "ID 2 bytes IP header ID for reassembly"
+.It "Offset 2 bytes IP fragment offset and flags, network byte order"
+.It "TTL 1 byte IP Time-to-Live"
+.It "Protocol 1 byte IP protocol number"
+.It "Checksum 2 bytes IP header checksum, network byte order"
+.It "Source Address 4 bytes IPv4 source address"
+.It "Destination Address 4 bytes IPv4 destination address"
+.El
+.Ss iport Token
+The
+.Dq iport
+token stores an IP port number in network byte order.
+An
+.Dq iport
+token can be created using
+.Xr au_to_iport 3 .
+.Bl -column -offset 3n ".No Terminal Address Type/Length" ".No N bytes + 1 NUL"
+.It Sy "Field Bytes Description"
+.It "Token ID 1 byte Token ID"
+.It "Port Number 2 bytes Port number in network byte order"
+.El
+.Ss Path Token
+The
+.Dq path
+token contains a pathname.
+A
+.Dq path
+token can be created using
+.Xr au_to_path 3 .
+.Bl -column -offset 3n ".No Terminal Address Type/Length" ".No N bytes + 1 NUL"
+.It Sy "Field Bytes Description"
+.It "Token ID 1 byte Token ID"
+.It "Path Length 2 bytes Length of path in bytes"
+.It "Path N bytes + 1 NUL Path name"
+.El
+.Ss path_attr Token
+The
+.Dq path_attr
+token contains a set of NUL-terminated path names.
+The
+.Xr libbsm 3
+API cannot currently create a
+.Dq path_attr
+token.
+.Bl -column -offset 3n ".No Terminal Address Type/Length" ".No N bytes + 1 NUL"
+.It Sy "Field Bytes Description"
+.It "Token ID 1 byte Token ID"
+.It "Count 2 bytes Number of NUL-terminated string(s) in token"
+.It "Path Variable count NUL-terminated string(s)"
+.El
+.Ss Process Token
+The
+.Dq process
+token contains a description of the security properties of a process
+involved as the target of an auditable event, such as the destination for
+signal delivery.
+It should not be confused with the
+.Dq subject
+token, which describes the subject performing an auditable event.
+This includes both the traditional
+.Ux
+security properties, such as user IDs and group IDs, but also audit
+information such as the audit user ID and session.
+A
+.Dq process
+token can be created using
+.Xr au_to_process32 3
+or
+.Xr au_to_process64 3 .
+.Bl -column -offset 3n ".No Terminal Address Type/Length" ".No N bytes + 1 NUL"
+.It Sy "Field Bytes Description"
+.It "Token ID 1 byte Token ID"
+.It "Audit ID 4 bytes Audit user ID"
+.It "Effective User ID 4 bytes Effective user ID"
+.It "Effective Group ID 4 bytes Effective group ID"
+.It "Real User ID 4 bytes Real user ID"
+.It "Real Group ID 4 bytes Real group ID"
+.It "Process ID 4 bytes Process ID"
+.It "Session ID 4 bytes Audit session ID"
+.It "Terminal Port ID 4/8 bytes Terminal port ID (32/64-bits)"
+.It "Terminal Machine Address 4 bytes IP address of machine"
+.El
+.Ss Expanded Process Token
+The
+.Dq expanded process
+token contains the contents of the
+.Dq process
+token, with the addition of a machine address type and variable length
+address storage capable of containing IPv6 addresses.
+An
+.Dq expanded process
+token can be created using
+.Xr au_to_process32_ex 3
+or
+.Xr au_to_process64_ex 3 .
+.Bl -column -offset 3n ".No Terminal Address Type/Length" ".No N bytes + 1 NUL"
+.It Sy "Field Bytes Description"
+.It "Token ID 1 byte Token ID"
+.It "Audit ID 4 bytes Audit user ID"
+.It "Effective User ID 4 bytes Effective user ID"
+.It "Effective Group ID 4 bytes Effective group ID"
+.It "Real User ID 4 bytes Real user ID"
+.It "Real Group ID 4 bytes Real group ID"
+.It "Process ID 4 bytes Process ID"
+.It "Session ID 4 bytes Audit session ID"
+.It "Terminal Port ID 4/8 bytes Terminal port ID (32/64-bits)"
+.It "Terminal Address Type/Length 1 byte Length of machine address"
+.It "Terminal Machine Address 4 bytes IPv4 or IPv6 address of machine"
+.El
+.Ss Return Token
+The
+.Dq return
+token contains a system call or library function return condition, including
+return value and error number associated with the global variable
+.Er errno .
+A
+.Dq return
+token can be created using
+.Xr au_to_return32 3
+or
+.Xr au_to_return64 3 .
+.Bl -column -offset 3n ".No Terminal Address Type/Length" ".No N bytes + 1 NUL"
+.It Sy "Field Bytes Description"
+.It "Token ID 1 byte Token ID"
+.It "Error Number 1 byte Errno value, or 0 if undefined"
+.It "Return Value 4/8 bytes Return value (32/64-bits)"
+.El
+.Ss Subject Token
+The
+.Dq subject
+token contains information on the subject performing the operation described
+by an audit record, and includes similar information to that found in the
+.Dq process
+and
+.Dq expanded process
+tokens.
+However, those tokens are used where the process being described is the
+target of the operation, not the authorizing party.
+A
+.Dq subject
+token can be created using
+.Xr au_to_subject32 3
+and
+.Xr au_to_subject64 3 .
+.Bl -column -offset 3n ".No Terminal Address Type/Length" ".No N bytes + 1 NUL"
+.It Sy "Field Bytes Description"
+.It "Token ID 1 byte Token ID"
+.It "Audit ID 4 bytes Audit user ID"
+.It "Effective User ID 4 bytes Effective user ID"
+.It "Effective Group ID 4 bytes Effective group ID"
+.It "Real User ID 4 bytes Real user ID"
+.It "Real Group ID 4 bytes Real group ID"
+.It "Process ID 4 bytes Process ID"
+.It "Session ID 4 bytes Audit session ID"
+.It "Terminal Port ID 4/8 bytes Terminal port ID (32/64-bits)"
+.It "Terminal Machine Address 4 bytes IP address of machine"
+.El
+.Ss Expanded Subject Token
+The
+.Dq expanded subject
+token consists of the same elements as the
+.Dq subject
+token, with the addition of type/length and variable size machine address
+information in the terminal ID.
+An
+.Dq expanded subject
+token can be created using
+.Xr au_to_subject32_ex 3
+or
+.Xr au_to_subject64_ex 3 .
+.Bl -column -offset 3n ".No Terminal Address Type/Length" ".No N bytes + 1 NUL"
+.It Sy "Field Bytes Description"
+.It "Token ID 1 byte Token ID"
+.It "Audit ID 4 bytes Audit user ID"
+.It "Effective User ID 4 bytes Effective user ID"
+.It "Effective Group ID 4 bytes Effective group ID"
+.It "Real User ID 4 bytes Real user ID"
+.It "Real Group ID 4 bytes Real group ID"
+.It "Process ID 4 bytes Process ID"
+.It "Session ID 4 bytes Audit session ID"
+.It "Terminal Port ID 4/8 bytes Terminal port ID (32/64-bits)"
+.It "Terminal Address Type/Length 1 byte Length of machine address"
+.It "Terminal Machine Address 4 bytes IPv4 or IPv6 address of machine"
+.El
+.Ss System V IPC Token
+The
+.Dq System V IPC
+token contains the System V IPC message handle, semaphore handle or shared
+memory handle.
+A System V IPC token may be created using
++.Xr au_to_ipc 3 .
+.Bl -column -offset 3n ".No Terminal Address Type/Length" ".No N bytes + 1 NUL"
+.It Sy "Field Bytes Description"
+.It "Token ID 1 byte Token ID"
+.It "Object ID type 1 byte Object ID"
+.It "Object ID 4 bytes Object ID"
+.El
+.Ss Text Token
+The
+.Dq text
+token contains a single NUL-terminated text string.
+A
+.Dq text
+token may be created using
+.Xr au_to_text 3 .
+.Bl -column -offset 3n ".No Terminal Address Type/Length" ".No N bytes + 1 NUL"
+.It Sy "Field Bytes Description"
+.It "Token ID 1 byte Token ID"
+.It "Text Length 2 bytes Length of text string including NUL"
+.It "Text N bytes + 1 NUL Text string including NUL"
+.El
+.Ss Attribute Token
+The
+.Dq attribute
+token describes the attributes of a file associated with the audit event.
+As files may be identified by 0, 1, or many path names, a path name is not
+included with the attribute block for a file; optional
+.Dq path
+tokens may also be present in an audit record indicating which path, if any,
+was used to reach the object.
+An
+.Dq attribute
+token can be created using
+.Xr au_to_attr32 3
+or
+.Xr au_to_attr64 3 .
+.Bl -column -offset 3n ".No Terminal Address Type/Length" ".No N bytes + 1 NUL"
+.It Sy "Field Bytes Description"
+.It "Token ID 1 byte Token ID"
+.It "File Access Mode 1 byte mode_t associated with file"
+.It "Owner User ID 4 bytes uid_t associated with file"
+.It "Owner Group ID 4 bytes gid_t associated with file"
+.It "File System ID 4 bytes fsid_t associated with file"
+.It "File System Node ID 8 bytes ino_t associated with file"
+.It "Device 4/8 bytes Device major/minor number (32/64-bit)"
+.El
+.Ss Groups Token
+The
+.Dq groups
+token contains a list of group IDs associated with the audit event.
+A
+.Dq groups
+token can be created using
+.Xr au_to_groups 3 .
+.Bl -column -offset 3n ".No Terminal Address Type/Length" ".No N bytes + 1 NUL"
+.It Sy "Field Bytes Description"
+.It "Token ID 1 byte Token ID"
+.It "Number of Groups 2 bytes Number of groups in token"
+.It "Group List N * 4 bytes List of N group IDs"
+.El
+.Ss System V IPC Permission Token
+The
+.Dq System V IPC permission
+token contains a System V IPC access permissions.
+A System V IPC permission token may be created using
+.Xr au_to_ipc_perm 3 .
+.Bl -column -offset 3n ".No Terminal Address Type/Length" ".No N bytes + 1 NUL"
+.It Sy "Field Bytes Description"
+.It "Token ID 1 byte Token ID"
+.It Li "Owner user ID" Ta "4 bytes" Ta "User ID of IPC owner"
+.It Li "Owner group ID" Ta "4 bytes" Ta "Group ID of IPC owner"
+.It Li "Creator user ID" Ta "4 bytes" Ta "User ID of IPC creator"
+.It Li "Creator group ID" Ta "4 bytes" Ta "Group ID of IPC creator"
+.It Li "Access mode" Ta "4 bytes" Ta "Access mode"
+.It Li "Sequence number" Ta "4 bytes" Ta "Sequence number"
+.It Li "Key" Ta "4 bytes" Ta "IPC key"
+.El
+.Ss Arg Token
+The
+.Dq arg
+token contains information about arguments of the system call.
+Depending on the size of the desired argument value, an Arg token may be
+created using
+.Xr au_to_arg32 3
+or
+.Xr au_to_arg64 3 .
+.Bl -column -offset 3n ".No Terminal Address Type/Length" ".No N bytes + 1 NUL"
+.It Sy "Field Bytes Description"
+.It "Token ID 1 byte Token ID"
+.It Li "Argument ID" Ta "1 byte" Ta "Argument ID"
+.It Li "Argument value" Ta "4/8 bytes" Ta "Argument value"
+.It Li "Length" Ta "2 bytes" Ta "Length of the text"
+.It Li "Text" Ta "N bytes + 1 nul" Ta "The string including nul"
+.El
+.Ss exec_args Token
+The
+.Dq exec_args
+token contains information about arguments of the exec() system call.
+An exec_args token may be created using
+.Xr au_to_exec_args 3 .
+.Bl -column -offset 3n ".No Terminal Address Type/Length" ".No N bytes + 1 NUL"
+.It Sy "Field Bytes Description"
+.It "Token ID 1 byte Token ID"
+.It Li "Count" Ta "4 bytes" Ta "Number of arguments"
+.It Li "Text" Ta "* bytes" Ta "Count nul-terminated strings"
+.El
+.Ss exec_env Token
+The
+.Dq exec_env
+token contains current environment variables to an exec() system call.
+An exec_args token may be created using
+.Xr au_to_exec_env 3 .
+.Bl -column -offset 3n ".No Terminal Address Type/Length" ".No N bytes + 1 NUL"
+.It Sy "Field Bytes Description"
+.It "Token ID 1 byte Token ID"
+.It Li "Count ID" Ta "4 bytes" Ta "Number of variables"
+.It Li "Text" Ta "* bytes" Ta "Count nul-terminated strings"
+.El
+.Ss Exit Token
+The
+.Dq exit
+token contains process exit/return code information.
+An
+.Dq exit
+token can be created using
+.Xr au_to_exit 3 .
+.Bl -column -offset 3n ".No Terminal Address Type/Length" ".No N bytes + 1 NUL"
+.It Sy "Field Bytes Description"
+.It "Token ID 1 byte Token ID"
+.It "Status 4 bytes Process status on exit"
+.It "Return Value 4 bytes Process return value on exit"
+.El
+.Ss Socket Token
+The
+.Dq socket
+token contains information about UNIX domain and Internet sockets.
+Each token has four or eight fields.
+Depending on the type of socket, a socket token may be created using
+.Xr au_to_sock_unix 3 ,
+.Xr au_to_sock_inet32 3
+or
+.Xr au_to_sock_inet128 3 .
+.Bl -column -offset 3n ".Sy Field Name Width XX" ".Sy XX Bytes XXXX" ".Sy Description"
+.It Sy "Field" Ta Sy Bytes Ta Sy Description
+.It Li "Token ID" Ta "1 byte" Ta "Token ID"
+.It Li "Socket family" Ta "2 bytes" Ta "Socket family"
+.It Li "Local port" Ta "2 bytes" Ta "Local port"
+.It Li "Socket address" Ta "4 bytes" Ta "Socket address"
+.El
+.Ss Expanded Socket Token
+The
+.Dq expanded socket
+token contains information about IPv4 and IPv6 sockets.
+A
+.Dq expanded socket
+token can be created using
+.Xr au_to_socket_ex 3 .
+.Bl -column -offset 3n ".No Terminal Address Type/Length" ".No N bytes + 1 NUL"
+.It Sy "Field Bytes Description"
+.It Li "Token ID" Ta "1 byte" Ta "Token ID"
+.It Li "Socket domain" Ta "2 bytes" Ta "Socket domain"
+.It Li "Socket type" Ta "2 bytes" Ta "Socket type"
+.It Li "Address type" Ta "2 byte" Ta "Address type (IPv4/IPv6)"
+.It Li "Local port" Ta "2 bytes" Ta "Local port"
+.It Li "Local IP address" Ta "4/16 bytes" Ta "Local IP address"
+.It Li "Remote port" Ta "2 bytes" Ta "Remote port"
+.It Li "Remote IP address" Ta "4/16 bytes" Ta "Remote IP address"
+.El
+.Ss Seq Token
+The
+.Dq seq
+token contains a unique and monotonically increasing audit event sequence ID.
+Due to the limited range of 32 bits, serial number arithmetic and caution
+should be used when comparing sequence numbers.
+.Bl -column -offset 3n ".No Terminal Address Type/Length" ".No N bytes + 1 NUL"
+.It Sy "Field Bytes Description"
+.It "Token ID 1 byte Token ID"
+.It "Sequence Number 4 bytes Audit event sequence number"
+.El
+.Ss privilege Token
+The
+.Dq privilege
+token ...
+.Bl -column -offset 3n ".No Terminal Address Type/Length" ".No N bytes + 1 NUL"
+.It Sy "Field Bytes Description"
+.It "Token ID 1 byte Token ID"
+.El
+.Ss Use-of-auth Token
+The
+.Dq use-of-auth
+token ...
+.Bl -column -offset 3n ".No Terminal Address Type/Length" ".No N bytes + 1 NUL"
+.It Sy "Field Bytes Description"
+.It "Token ID 1 byte Token ID"
+.El
+.Ss Command Token
+The
+.Dq command
+token ...
+.Bl -column -offset 3n ".No Terminal Address Type/Length" ".No N bytes + 1 NUL"
+.It Sy "Field Bytes Description"
+.It "Token ID 1 byte Token ID"
+.El
+.Ss ACL Token
+The
+.Dq ACL
+token ...
+.Bl -column -offset 3n ".No Terminal Address Type/Length" ".No N bytes + 1 NUL"
+.It Sy "Field Bytes Description"
+.It "Token ID 1 byte Token ID"
+.El
+.Ss Zonename Token
+The
+.Dq zonename
+token holds a NUL-terminated string with the name of the zone or jail from
+which the record originated.
+A
+.Dq zonename
+token can be created using
+.Xr au_to_zonename 3 .
+.Bl -column -offset 3n ".No Terminal Address Type/Length" ".No N bytes + 1 NUL"
+.It Sy "Field Bytes Description"
+.It "Token ID 1 byte Token ID"
+.It "Zonename length 2 bytes Length of zonename string including NUL"
+.It "Zonename N bytes + 1 NUL Zonename string including NUL"
+.El
+.Sh SEE ALSO
+.Xr auditreduce 1 ,
+.Xr praudit 1 ,
+.Xr libbsm 3 ,
+.Xr audit 4 ,
+.Xr auditpipe 4 ,
+.Xr audit 8
+.Sh HISTORY
+The OpenBSM implementation was created by McAfee Research, the security
+division of McAfee Inc., under contract to Apple Computer Inc.\& in 2004.
+It was subsequently adopted by the TrustedBSD Project as the foundation for
+the OpenBSM distribution.
+.Sh AUTHORS
+The Basic Security Module (BSM) interface to audit records and audit event
+stream format were defined by Sun Microsystems.
+.Pp
+This manual page was written by
+.An Robert Watson Aq rwatson at FreeBSD.org .
+.Sh BUGS
+The
+.Dq How to print
+field in the
+.Dq arbitrary data
+token has undefined values.
+.Pp
+The
+.Dq in_addr
+and
+.Dq in_addr_ex
+token layout documented here appears to be in conflict with the
+.Xr libbsm 3
+implementation of
+.Xr au_to_in_addr_ex 3 .
Deleted: vendor/openbsm/1.2_alpha4/man/audit_class.5
===================================================================
--- vendor/openbsm/dist/man/audit_class.5 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/man/audit_class.5 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,80 +0,0 @@
-.\" Copyright (c) 2004 Apple Computer, Inc.
-.\" All rights reserved.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\" notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\" notice, this list of conditions and the following disclaimer in the
-.\" documentation and/or other materials provided with the distribution.
-.\" 3. Neither the name of Apple Computer, Inc. ("Apple") nor the names of
-.\" its contributors may be used to endorse or promote products derived
-.\" from this software without specific prior written permission.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND
-.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-.\" ARE DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR
-.\" ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-.\" STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
-.\" IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-.\" POSSIBILITY OF SUCH DAMAGE.
-.\"
-.\" $P4: //depot/projects/trustedbsd/openbsm/man/audit_class.5#10 $
-.\"
-.Dd January 24, 2004
-.Dt AUDIT_CLASS 5
-.Os
-.Sh NAME
-.Nm audit_class
-.Nd "audit event class descriptions"
-.Sh DESCRIPTION
-The
-.Nm
-file contains descriptions of the auditable event classes on the system.
-Each auditable event is a member of an event class.
-Each line maps an audit event
-mask (bitmap) to a class and a description.
-Entries are of the form:
-.Pp
-.D1 Ar classmask Ns : Ns Ar eventclass Ns : Ns Ar description
-.Pp
-Example entries in this file are:
-.Bd -literal -offset indent
-0x00000000:no:invalid class
-0x00000001:fr:file read
-0x00000002:fw:file write
-0x00000004:fa:file attribute access
-0x00000080:pc:process
-0xffffffff:all:all flags set
-.Ed
-.Sh FILES
-.Bl -tag -width ".Pa /etc/security/audit_class" -compact
-.It Pa /etc/security/audit_class
-.El
-.Sh SEE ALSO
-.Xr audit 4 ,
-.Xr audit_control 5 ,
-.Xr audit_event 5 ,
-.Xr audit_user 5
-.Sh HISTORY
-The OpenBSM implementation was created by McAfee Research, the security
-division of McAfee Inc., under contract to Apple Computer Inc.\& in 2004.
-It was subsequently adopted by the TrustedBSD Project as the foundation for
-the OpenBSM distribution.
-.Sh AUTHORS
-.An -nosplit
-This software was created by McAfee Research, the security research division
-of McAfee, Inc., under contract to Apple Computer Inc.
-Additional authors include
-.An Wayne Salamon ,
-.An Robert Watson ,
-and SPARTA Inc.
-.Pp
-The Basic Security Module (BSM) interface to audit records and audit event
-stream format were defined by Sun Microsystems.
Copied: vendor/openbsm/1.2_alpha4/man/audit_class.5 (from rev 11163, vendor/openbsm/dist/man/audit_class.5)
===================================================================
--- vendor/openbsm/1.2_alpha4/man/audit_class.5 (rev 0)
+++ vendor/openbsm/1.2_alpha4/man/audit_class.5 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,78 @@
+.\" Copyright (c) 2004 Apple Inc.
+.\" All rights reserved.
+.\"
+.\" Redistribution and use in source and binary forms, with or without
+.\" modification, are permitted provided that the following conditions
+.\" are met:
+.\" 1. Redistributions of source code must retain the above copyright
+.\" notice, this list of conditions and the following disclaimer.
+.\" 2. Redistributions in binary form must reproduce the above copyright
+.\" notice, this list of conditions and the following disclaimer in the
+.\" documentation and/or other materials provided with the distribution.
+.\" 3. Neither the name of Apple Inc. ("Apple") nor the names of
+.\" its contributors may be used to endorse or promote products derived
+.\" from this software without specific prior written permission.
+.\"
+.\" THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND
+.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+.\" ARE DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR
+.\" ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+.\" STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+.\" IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+.\" POSSIBILITY OF SUCH DAMAGE.
+.\"
+.Dd January 24, 2004
+.Dt AUDIT_CLASS 5
+.Os
+.Sh NAME
+.Nm audit_class
+.Nd "audit event class descriptions"
+.Sh DESCRIPTION
+The
+.Nm
+file contains descriptions of the auditable event classes on the system.
+Each auditable event is a member of an event class.
+Each line maps an audit event
+mask (bitmap) to a class and a description.
+Entries are of the form:
+.Pp
+.D1 Ar classmask Ns : Ns Ar eventclass Ns : Ns Ar description
+.Pp
+Example entries in this file are:
+.Bd -literal -offset indent
+0x00000000:no:invalid class
+0x00000001:fr:file read
+0x00000002:fw:file write
+0x00000004:fa:file attribute access
+0x00000080:pc:process
+0xffffffff:all:all flags set
+.Ed
+.Sh FILES
+.Bl -tag -width ".Pa /etc/security/audit_class" -compact
+.It Pa /etc/security/audit_class
+.El
+.Sh SEE ALSO
+.Xr audit 4 ,
+.Xr audit_control 5 ,
+.Xr audit_event 5 ,
+.Xr audit_user 5
+.Sh HISTORY
+The OpenBSM implementation was created by McAfee Research, the security
+division of McAfee Inc., under contract to Apple Computer Inc.\& in 2004.
+It was subsequently adopted by the TrustedBSD Project as the foundation for
+the OpenBSM distribution.
+.Sh AUTHORS
+.An -nosplit
+This software was created by McAfee Research, the security research division
+of McAfee, Inc., under contract to Apple Computer Inc.
+Additional authors include
+.An Wayne Salamon ,
+.An Robert Watson ,
+and SPARTA Inc.
+.Pp
+The Basic Security Module (BSM) interface to audit records and audit event
+stream format were defined by Sun Microsystems.
Deleted: vendor/openbsm/1.2_alpha4/man/audit_control.5
===================================================================
--- vendor/openbsm/dist/man/audit_control.5 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/man/audit_control.5 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,209 +0,0 @@
-.\" Copyright (c) 2004 Apple Computer, Inc.
-.\" Copyright (c) 2006 Robert N. M. Watson
-.\" All rights reserved.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\" notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\" notice, this list of conditions and the following disclaimer in the
-.\" documentation and/or other materials provided with the distribution.
-.\" 3. Neither the name of Apple Computer, Inc. ("Apple") nor the names of
-.\" its contributors may be used to endorse or promote products derived
-.\" from this software without specific prior written permission.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND
-.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-.\" ARE DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR
-.\" ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-.\" STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
-.\" IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-.\" POSSIBILITY OF SUCH DAMAGE.
-.\"
-.\" $P4: //depot/projects/trustedbsd/openbsm/man/audit_control.5#17 $
-.\"
-.Dd January 4, 2006
-.Dt AUDIT_CONTROL 5
-.Os
-.Sh NAME
-.Nm audit_control
-.Nd "audit system parameters"
-.Sh DESCRIPTION
-The
-.Nm
-file contains several audit system parameters.
-Each line of this file is of the form:
-.Pp
-.D1 Ar parameter Ns : Ns Ar value
-.Pp
-The parameters are:
-.Bl -tag -width indent
-.It Va dir
-The directory where audit log files are stored.
-There may be more than one of these entries.
-Changes to this entry can only be enacted by restarting the
-audit system.
-See
-.Xr audit 8
-for a description of how to restart the audit system.
-.It Va flags
-Specifies which audit event classes are audited for all users.
-.Xr audit_user 5
-describes how to audit events for individual users.
-See the information below for the format of the audit flags.
-.It Va naflags
-Contains the audit flags that define what classes of events are audited when
-an action cannot be attributed to a specific user.
-.It Va minfree
-The minimum free space required on the file system audit logs are being written to.
-When the free space falls below this limit a warning will be issued.
-Not currently used as the value of 20 percent is chosen by the kernel.
-.It Va policy
-A list of global audit policy flags specifying various behaviors, such as
-fail stop, auditing of paths and arguments, etc.
-.It Va filesz
-Maximum trail size in bytes; if set to a non-0 value, the audit daemon will
-rotate the audit trail file at around this size.
-Sizes less than the minimum trail size (default of 512K) will be rejected as
-invalid.
-If 0, trail files will not be automatically rotated based on file size.
-.El
-.Sh AUDIT FLAGS
-Audit flags are a comma-delimited list of audit classes as defined in the
-.Xr audit_class 5
-file.
-Event classes may be preceded by a prefix which changes their interpretation.
-The following prefixes may be used for each class:
-.Pp
-.Bl -tag -width indent -compact -offset indent
-.It (none)
-Record both successful and failed events.
-.It Li +
-Record successful events.
-.It Li -
-Record failed events.
-.It Li ^
-Record neither successful nor failed events.
-.It Li ^+
-Do not record successful events.
-.It Li ^-
-Do not record failed events.
-.El
-.Sh AUDIT POLICY FLAGS
-The policy flags field is a comma-delimited list of policy flags from the
-following list:
-.Pp
-.Bl -tag -width ".Cm zonename" -compact -offset indent
-.It Cm cnt
-Allow processes to continue running even though events are not being audited.
-If not set, processes will be suspended when the audit store space is
-exhausted.
-Currently, this is not a recoverable state.
-.It Cm ahlt
-Fail stop the system if unable to audit an event\[em]this consists of first
-draining pending records to disk, and then halting the operating system.
-.It Cm argv
-Audit command line arguments to
-.Xr execve 2 .
-.It Cm arge
-Audit environmental variable arguments to
-.Xr execve 2 .
-.It Cm seq
-Include a unique audit sequence number token in generated audit records (not
-implemented on
-.Fx
-or Darwin).
-.It Cm group
-Include supplementary groups list in generated audit records (not implemented
-on
-.Fx
-or Darwin; supplementary groups are never included in records on
-these systems).
-.It Cm trail
-Append a trailer token to each audit record (not implemented on
-.Fx
-or
-Darwin; trailers are always included in records on these systems).
-.It Cm path
-Include secondary file paths in audit records (not implemented on
-.Fx
-or
-Darwin; secondary paths are never included in records on these systems).
-.It Cm zonename
-Include a zone ID token with each audit record (not implemented on
-.Fx
-or
-Darwin;
-.Fx
-audit records do not currently include the jail ID or name).
-.It Cm perzone
-Enable auditing for each local zone (not implemented on
-.Fx
-or Darwin; on
-.Fx ,
-audit records are collected from all jails and placed in a single
-global trail, and only limited audit controls are permitted within a jail).
-.El
-.Pp
-It is recommended that installations set the
-.Cm cnt
-flag but not
-.Cm ahlt
-flag unless it is intended that audit logs exceeding available disk space
-halt the system.
-.Sh DEFAULT
-The following settings appear in the default
-.Nm
-file:
-.Bd -literal -offset indent
-dir:/var/audit
-flags:lo
-minfree:20
-naflags:lo
-policy:cnt
-filesz:0
-.Ed
-.Pp
-The
-.Va flags
-parameter above specifies the system-wide mask corresponding to login/logout
-events.
-The
-.Va policy
-parameter specifies that the system should neither fail stop nor suspend
-processes when the audit store fills.
-The trail file will not be automatically rotated by the audit daemon based on
-file size.
-.Sh FILES
-.Bl -tag -width ".Pa /etc/security/audit_control" -compact
-.It Pa /etc/security/audit_control
-.El
-.Sh SEE ALSO
-.Xr audit 4 ,
-.Xr audit_class 5 ,
-.Xr audit_event 5 ,
-.Xr audit_user 5 ,
-.Xr audit 8 ,
-.Xr auditd 8
-.Sh HISTORY
-The OpenBSM implementation was created by McAfee Research, the security
-division of McAfee Inc., under contract to Apple Computer Inc.\& in 2004.
-It was subsequently adopted by the TrustedBSD Project as the foundation for
-the OpenBSM distribution.
-.Sh AUTHORS
-.An -nosplit
-This software was created by McAfee Research, the security research division
-of McAfee, Inc., under contract to Apple Computer Inc.
-Additional authors include
-.An Wayne Salamon ,
-.An Robert Watson ,
-and SPARTA Inc.
-.Pp
-The Basic Security Module (BSM) interface to audit records and audit event
-stream format were defined by Sun Microsystems.
Copied: vendor/openbsm/1.2_alpha4/man/audit_control.5 (from rev 11163, vendor/openbsm/dist/man/audit_control.5)
===================================================================
--- vendor/openbsm/1.2_alpha4/man/audit_control.5 (rev 0)
+++ vendor/openbsm/1.2_alpha4/man/audit_control.5 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,295 @@
+.\" Copyright (c) 2004-2009 Apple Inc.
+.\" Copyright (c) 2006 Robert N. M. Watson
+.\" All rights reserved.
+.\"
+.\" Redistribution and use in source and binary forms, with or without
+.\" modification, are permitted provided that the following conditions
+.\" are met:
+.\" 1. Redistributions of source code must retain the above copyright
+.\" notice, this list of conditions and the following disclaimer.
+.\" 2. Redistributions in binary form must reproduce the above copyright
+.\" notice, this list of conditions and the following disclaimer in the
+.\" documentation and/or other materials provided with the distribution.
+.\" 3. Neither the name of Apple Inc. ("Apple") nor the names of
+.\" its contributors may be used to endorse or promote products derived
+.\" from this software without specific prior written permission.
+.\"
+.\" THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND
+.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+.\" ARE DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR
+.\" ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+.\" STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+.\" IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+.\" POSSIBILITY OF SUCH DAMAGE.
+.\"
+.Dd May 14, 2009
+.Dt AUDIT_CONTROL 5
+.Os
+.Sh NAME
+.Nm audit_control
+.Nd "audit system parameters"
+.Sh DESCRIPTION
+The
+.Nm
+file contains several audit system parameters.
+Each line of this file is of the form:
+.Pp
+.D1 Ar parameter Ns : Ns Ar value
+.Pp
+The parameters are:
+.Bl -tag -width indent
+.It Va dir
+The directory where audit log files are stored.
+There may be more than one of these entries.
+Changes to this entry can only be enacted by restarting the
+audit system.
+See
+.Xr audit 8
+for a description of how to restart the audit system.
+.It Va dist
+When set to
+.Va on
+or
+.Va yes ,
+.Xr auditd 8
+will be creating hardlinks to all trail files in
+.Pa /var/audit/dist
+directory.
+Those hardlinks will be consumed by the
+.Xr auditdistd 8
+daemon.
+.It Va flags
+Specifies which audit event classes are audited for all users.
+.Xr audit_user 5
+describes how to audit events for individual users.
+See the information below for the format of the audit flags.
+.It Va host
+Specify the hostname or IP address to be used when setting the local
+systems's audit host information.
+This hostname will be converted into an IP or IPv6 address and will
+be included in the header of each audit record.
+Due to the possibility of transient errors coupled with the
+security issues in the DNS protocol itself, the use of DNS
+should be avoided.
+Instead, it is strongly recommended that the hostname be
+specified in the /etc/hosts file.
+For more information see
+.Xr hosts 5 .
+.It Va naflags
+Contains the audit flags that define what classes of events are audited when
+an action cannot be attributed to a specific user.
+.It Va minfree
+The minimum free space required on the file system audit logs are being written to.
+When the free space falls below this limit a warning will be issued.
+If no value for the minimum free space is set, the default of 20 percent is
+applied by the kernel.
+.It Va policy
+A list of global audit policy flags specifying various behaviors, such as
+fail stop, auditing of paths and arguments, etc.
+.It Va filesz
+Maximum trail size in bytes; if set to a non-0 value, the audit daemon will
+rotate the audit trail file at around this size.
+Sizes less than the minimum trail size (default of 512K) will be rejected as
+invalid.
+If 0, trail files will not be automatically rotated based on file size.
+For convenience, the trail size may be expressed with suffix letters:
+B (Bytes), K (Kilobytes), M (Megabytes), or G (Gigabytes).
+For example, 2M is the same as 2097152.
+.It Va expire-after
+Specifies when audit log files will expire and be removed.
+This may be after a time period has passed since the file was last
+written to or when the aggregate of all the trail files have reached a
+specified size or a combination of both.
+If no expire-after parameter is given then audit log files will not
+expire and be removed by the audit control system.
+See the information below for the format of the expiration
+specification.
+.El
+.Sh AUDIT FLAGS
+Audit flags are a comma-delimited list of audit classes as defined in the
+.Xr audit_class 5
+file.
+Event classes may be preceded by a prefix which changes their interpretation.
+The following prefixes may be used for each class:
+.Pp
+.Bl -tag -width indent -compact -offset indent
+.It (none)
+Record both successful and failed events.
+.It Li +
+Record successful events.
+.It Li -
+Record failed events.
+.It Li ^
+Record neither successful nor failed events.
+.It Li ^+
+Do not record successful events.
+.It Li ^-
+Do not record failed events.
+.El
+.Sh AUDIT POLICY FLAGS
+The policy flags field is a comma-delimited list of policy flags from the
+following list:
+.Pp
+.Bl -tag -width ".Cm zonename" -compact -offset indent
+.It Cm cnt
+Allow processes to continue running even though events are not being audited.
+If not set, processes will be suspended when the audit store space is
+exhausted.
+Currently, this is not a recoverable state.
+.It Cm ahlt
+Fail stop the system if unable to audit an event\[em]this consists of first
+draining pending records to disk, and then halting the operating system.
+.It Cm argv
+Audit command line arguments to
+.Xr execve 2 .
+.It Cm arge
+Audit environmental variable arguments to
+.Xr execve 2 .
+.It Cm seq
+Include a unique audit sequence number token in generated audit records (not
+implemented on
+.Fx
+or Darwin).
+.It Cm group
+Include supplementary groups list in generated audit records (not implemented
+on
+.Fx
+or Darwin; supplementary groups are never included in records on
+these systems).
+.It Cm trail
+Append a trailer token to each audit record (not implemented on
+.Fx
+or
+Darwin; trailers are always included in records on these systems).
+.It Cm path
+Include secondary file paths in audit records (not implemented on
+.Fx
+or
+Darwin; secondary paths are never included in records on these systems).
+.It Cm zonename
+Include a zone ID token with each audit record (not implemented on
+.Fx
+or
+Darwin;
+.Fx
+audit records do not currently include the jail ID or name).
+.It Cm perzone
+Enable auditing for each local zone (not implemented on
+.Fx
+or Darwin; on
+.Fx ,
+audit records are collected from all jails and placed in a single
+global trail, and only limited audit controls are permitted within a jail).
+.El
+.Pp
+It is recommended that installations set the
+.Cm cnt
+flag but not
+.Cm ahlt
+flag unless it is intended that audit logs exceeding available disk space
+halt the system.
+.Sh AUDIT LOG EXPIRATION SPECIFICATION
+The expiration specification can be one value or two values with the
+logical conjunction of AND/OR between them.
+Values for the audit log file age are numbers with the following
+suffixes:
+.Pp
+.Bl -tag -width "(space) or" -compact -offset indent
+.It Li s
+Log file age in seconds.
+.It Li h
+Log file age in hours.
+.It Li d
+Log file age in days.
+.It Li y
+Log file age in years.
+.El
+.Pp
+Values for the disk space used are numbers with the following suffixes:
+.Pp
+.Bl -tag -width "(space) or" -compact -offset indent
+.It (space) or
+.It Li B
+Disk space used in Bytes.
+.It Li K
+Disk space used in Kilobytes.
+.It Li M
+Disk space used in Megabytes.
+.It Li G
+Disk space used in Gigabytes.
+.El
+.Pp
+The suffixes on the values are case sensitive.
+If both an age and disk space value are used they are separated by
+AND or OR and both values are used to determine when audit
+log files expire.
+In the case of AND, both the age and disk space conditions must be met
+before the log file is removed.
+In the case of OR, either condition may expire the log file.
+For example:
+.Bd -literal -offset indent
+expire-after: 60d AND 1G
+.Ed
+.Pp
+will expire files that are older than 60 days but only if 1
+gigabyte of disk space total is being used by the audit logs.
+.Sh DEFAULT
+The following settings appear in the default
+.Nm
+file:
+.Bd -literal -offset indent
+dir:/var/audit
+flags:lo,aa
+minfree:5
+naflags:lo,aa
+policy:cnt,argv
+filesz:2M
+expire-after:10M
+.Ed
+.Pp
+The
+.Va flags
+parameter above specifies the system-wide mask corresponding to login/logout
+as well as authentication and authorization events.
+The
+.Va policy
+parameter specifies that the system should neither fail stop nor suspend
+processes when the audit store fills and that command line arguments should
+be audited for
+.Dv AUE_EXECVE
+events.
+The trail file will be automatically rotated by the audit daemon when the
+file size reaches approximately 2MB.
+Trail files will expire when their aggregate size exceeds 10MB.
+.Sh FILES
+.Bl -tag -width ".Pa /etc/security/audit_control" -compact
+.It Pa /etc/security/audit_control
+.El
+.Sh SEE ALSO
+.Xr auditon 2 ,
+.Xr audit 4 ,
+.Xr audit_class 5 ,
+.Xr audit_event 5 ,
+.Xr audit_user 5 ,
+.Xr audit 8 ,
+.Xr auditd 8
+.Sh HISTORY
+The OpenBSM implementation was created by McAfee Research, the security
+division of McAfee Inc., under contract to Apple Computer Inc.\& in 2004.
+It was subsequently adopted by the TrustedBSD Project as the foundation for
+the OpenBSM distribution.
+.Sh AUTHORS
+.An -nosplit
+This software was created by McAfee Research, the security research division
+of McAfee, Inc., under contract to Apple Computer Inc.
+Additional authors include
+.An Wayne Salamon ,
+.An Robert Watson ,
+and SPARTA Inc.
+.Pp
+The Basic Security Module (BSM) interface to audit records and audit event
+stream format were defined by Sun Microsystems.
Deleted: vendor/openbsm/1.2_alpha4/man/audit_event.5
===================================================================
--- vendor/openbsm/dist/man/audit_event.5 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/man/audit_event.5 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,84 +0,0 @@
-.\" Copyright (c) 2004 Apple Computer, Inc.
-.\" All rights reserved.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\" notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\" notice, this list of conditions and the following disclaimer in the
-.\" documentation and/or other materials provided with the distribution.
-.\" 3. Neither the name of Apple Computer, Inc. ("Apple") nor the names of
-.\" its contributors may be used to endorse or promote products derived
-.\" from this software without specific prior written permission.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND
-.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-.\" ARE DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR
-.\" ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-.\" STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
-.\" IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-.\" POSSIBILITY OF SUCH DAMAGE.
-.\"
-.\" $P4: //depot/projects/trustedbsd/openbsm/man/audit_event.5#11 $
-.\"
-.Dd January 24, 2004
-.Dt AUDIT_EVENT 5
-.Os
-.Sh NAME
-.Nm audit_event
-.Nd "audit event descriptions"
-.Sh DESCRIPTION
-The
-.Nm
-file contains descriptions of the auditable events on the system.
-Each line maps an audit event number to a name, a description, and a class.
-Entries are of the form:
-.Pp
-.Sm off
-.D1 Ar eventnum : eventname : description : eventclass
-.Sm on
-.Pp
-Each
-.Ar eventclass
-should have a corresponding entry in the
-.Xr audit_class 5
-file.
-.Pp
-Example entries in this file are:
-.Bd -literal -offset indent
-0:AUE_NULL:indir system call:no
-1:AUE_EXIT:exit(2):pc
-2:AUE_FORK:fork(2):pc
-3:AUE_OPEN:open(2):fa
-.Ed
-.Sh FILES
-.Bl -tag -width ".Pa /etc/security/audit_event" -compact
-.It Pa /etc/security/audit_event
-.El
-.Sh SEE ALSO
-.Xr audit 4 ,
-.Xr audit_class 5 ,
-.Xr audit_control 5 ,
-.Xr audit_user 5
-.Sh HISTORY
-The OpenBSM implementation was created by McAfee Research, the security
-division of McAfee Inc., under contract to Apple Computer Inc.\& in 2004.
-It was subsequently adopted by the TrustedBSD Project as the foundation for
-the OpenBSM distribution.
-.Sh AUTHORS
-.An -nosplit
-This software was created by McAfee Research, the security research division
-of McAfee, Inc., under contract to Apple Computer Inc.
-Additional authors include
-.An Wayne Salamon ,
-.An Robert Watson ,
-and SPARTA Inc.
-.Pp
-The Basic Security Module (BSM) interface to audit records and audit event
-stream format were defined by Sun Microsystems.
Copied: vendor/openbsm/1.2_alpha4/man/audit_event.5 (from rev 11163, vendor/openbsm/dist/man/audit_event.5)
===================================================================
--- vendor/openbsm/1.2_alpha4/man/audit_event.5 (rev 0)
+++ vendor/openbsm/1.2_alpha4/man/audit_event.5 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,82 @@
+.\" Copyright (c) 2004 Apple Inc.
+.\" All rights reserved.
+.\"
+.\" Redistribution and use in source and binary forms, with or without
+.\" modification, are permitted provided that the following conditions
+.\" are met:
+.\" 1. Redistributions of source code must retain the above copyright
+.\" notice, this list of conditions and the following disclaimer.
+.\" 2. Redistributions in binary form must reproduce the above copyright
+.\" notice, this list of conditions and the following disclaimer in the
+.\" documentation and/or other materials provided with the distribution.
+.\" 3. Neither the name of Apple Inc. ("Apple") nor the names of
+.\" its contributors may be used to endorse or promote products derived
+.\" from this software without specific prior written permission.
+.\"
+.\" THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND
+.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+.\" ARE DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR
+.\" ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+.\" STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+.\" IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+.\" POSSIBILITY OF SUCH DAMAGE.
+.\"
+.Dd January 24, 2004
+.Dt AUDIT_EVENT 5
+.Os
+.Sh NAME
+.Nm audit_event
+.Nd "audit event descriptions"
+.Sh DESCRIPTION
+The
+.Nm
+file contains descriptions of the auditable events on the system.
+Each line maps an audit event number to a name, a description, and a class.
+Entries are of the form:
+.Pp
+.Sm off
+.D1 Ar eventnum : eventname : description : eventclass
+.Sm on
+.Pp
+Each
+.Ar eventclass
+should have a corresponding entry in the
+.Xr audit_class 5
+file.
+.Pp
+Example entries in this file are:
+.Bd -literal -offset indent
+0:AUE_NULL:indir system call:no
+1:AUE_EXIT:exit(2):pc
+2:AUE_FORK:fork(2):pc
+3:AUE_OPEN:open(2):fa
+.Ed
+.Sh FILES
+.Bl -tag -width ".Pa /etc/security/audit_event" -compact
+.It Pa /etc/security/audit_event
+.El
+.Sh SEE ALSO
+.Xr audit 4 ,
+.Xr audit_class 5 ,
+.Xr audit_control 5 ,
+.Xr audit_user 5
+.Sh HISTORY
+The OpenBSM implementation was created by McAfee Research, the security
+division of McAfee Inc., under contract to Apple Computer Inc.\& in 2004.
+It was subsequently adopted by the TrustedBSD Project as the foundation for
+the OpenBSM distribution.
+.Sh AUTHORS
+.An -nosplit
+This software was created by McAfee Research, the security research division
+of McAfee, Inc., under contract to Apple Computer Inc.
+Additional authors include
+.An Wayne Salamon ,
+.An Robert Watson ,
+and SPARTA Inc.
+.Pp
+The Basic Security Module (BSM) interface to audit records and audit event
+stream format were defined by Sun Microsystems.
Deleted: vendor/openbsm/1.2_alpha4/man/audit_user.5
===================================================================
--- vendor/openbsm/dist/man/audit_user.5 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/man/audit_user.5 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,120 +0,0 @@
-.\" Copyright (c) 2004 Apple Computer, Inc.
-.\" All rights reserved.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\" notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\" notice, this list of conditions and the following disclaimer in the
-.\" documentation and/or other materials provided with the distribution.
-.\" 3. Neither the name of Apple Computer, Inc. ("Apple") nor the names of
-.\" its contributors may be used to endorse or promote products derived
-.\" from this software without specific prior written permission.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND
-.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-.\" ARE DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR
-.\" ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-.\" STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
-.\" IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-.\" POSSIBILITY OF SUCH DAMAGE.
-.\"
-.\" $P4: //depot/projects/trustedbsd/openbsm/man/audit_user.5#12 $
-.\"
-.Dd February 5, 2006
-.Dt AUDIT_USER 5
-.Os
-.Sh NAME
-.Nm audit_user
-.Nd "events to be audited for given users"
-.Sh DESCRIPTION
-The
-.Nm
-file specifies which audit event classes are to be audited for the given users.
-If specified, these flags are combined with the system-wide audit flags in the
-.Xr audit_control 5
-file to determine which classes of events to audit for that user.
-These settings take effect when the user logs in.
-.Pp
-Each line maps a user name to a list of classes that should be audited and a
-list of classes that should not be audited.
-Entries are of the form:
-.Pp
-.D1 Ar username Ns : Ns Ar alwaysaudit Ns : Ns Ar neveraudit
-.Pp
-In the format above,
-.Ar alwaysaudit
-is a set of event classes that are always audited, and
-.Ar neveraudit
-is a set of event classes that should not be audited.
-These sets can indicate
-the inclusion or exclusion of multiple classes, and whether to audit successful
-or failed events.
-See
-.Xr audit_control 5
-for more information about audit flags.
-.Pp
-Example entries in this file are:
-.Bd -literal -offset indent
-root:lo,ad:no
-jdoe:-fc,ad:+fw
-.Ed
-.Pp
-These settings would cause login/logout and administrative events that
-succeed on behalf of user
-.Dq Li root
-to be audited.
-No failure events are audited.
-For the user
-.Dq Li jdoe ,
-failed file creation events are audited, administrative events are
-audited, and successful file write events are never audited.
-.Sh IMPLEMENTATION NOTES
-Per-user and global audit preselection configuration are evaluated at time of
-login, so users must log out and back in again for audit changes relating to
-preselection to take effect.
-.Pp
-Audit record preselection occurs with respect to the audit identifier
-associated with a process, rather than with respect to the UNIX user or group
-ID.
-The audit identifier is set as part of the user credential context as part of
-login, and typically does not change as a result of running setuid or setgid
-applications, such as
-.Xr su 1 .
-This has the advantage that events that occur after running
-.Xr su 1
-can be audited to the original authenticated user, as required by CAPP, but
-may be surprising if not expected.
-.Sh FILES
-.Bl -tag -width ".Pa /etc/security/audit_user" -compact
-.It Pa /etc/security/audit_user
-.El
-.Sh SEE ALSO
-.Xr login 1 ,
-.Xr su 1 ,
-.Xr audit 4 ,
-.Xr audit_class 5 ,
-.Xr audit_control 5 ,
-.Xr audit_event 5
-.Sh HISTORY
-The OpenBSM implementation was created by McAfee Research, the security
-division of McAfee Inc., under contract to Apple Computer Inc.\& in 2004.
-It was subsequently adopted by the TrustedBSD Project as the foundation for
-the OpenBSM distribution.
-.Sh AUTHORS
-.An -nosplit
-This software was created by McAfee Research, the security research division
-of McAfee, Inc., under contract to Apple Computer Inc.
-Additional authors include
-.An Wayne Salamon ,
-.An Robert Watson ,
-and SPARTA Inc.
-.Pp
-The Basic Security Module (BSM) interface to audit records and audit event
-stream format were defined by Sun Microsystems.
Copied: vendor/openbsm/1.2_alpha4/man/audit_user.5 (from rev 11163, vendor/openbsm/dist/man/audit_user.5)
===================================================================
--- vendor/openbsm/1.2_alpha4/man/audit_user.5 (rev 0)
+++ vendor/openbsm/1.2_alpha4/man/audit_user.5 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,118 @@
+.\" Copyright (c) 2004 Apple Inc.
+.\" All rights reserved.
+.\"
+.\" Redistribution and use in source and binary forms, with or without
+.\" modification, are permitted provided that the following conditions
+.\" are met:
+.\" 1. Redistributions of source code must retain the above copyright
+.\" notice, this list of conditions and the following disclaimer.
+.\" 2. Redistributions in binary form must reproduce the above copyright
+.\" notice, this list of conditions and the following disclaimer in the
+.\" documentation and/or other materials provided with the distribution.
+.\" 3. Neither the name of Apple Inc. ("Apple") nor the names of
+.\" its contributors may be used to endorse or promote products derived
+.\" from this software without specific prior written permission.
+.\"
+.\" THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND
+.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+.\" ARE DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR
+.\" ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+.\" STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+.\" IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+.\" POSSIBILITY OF SUCH DAMAGE.
+.\"
+.Dd January 4, 2008
+.Dt AUDIT_USER 5
+.Os
+.Sh NAME
+.Nm audit_user
+.Nd "events to be audited for given users"
+.Sh DESCRIPTION
+The
+.Nm
+file specifies which audit event classes are to be audited for the given users.
+If specified, these flags are combined with the system-wide audit flags in the
+.Xr audit_control 5
+file to determine which classes of events to audit for that user.
+These settings take effect when the user logs in.
+.Pp
+Each line maps a user name to a list of classes that should be audited and a
+list of classes that should not be audited.
+Entries are of the form:
+.Pp
+.D1 Ar username Ns : Ns Ar alwaysaudit Ns : Ns Ar neveraudit
+.Pp
+In the format above,
+.Ar alwaysaudit
+is a set of event classes that are always audited, and
+.Ar neveraudit
+is a set of event classes that should not be audited.
+These sets can indicate
+the inclusion or exclusion of multiple classes, and whether to audit successful
+or failed events.
+See
+.Xr audit_control 5
+for more information about audit flags.
+.Pp
+Example entries in this file are:
+.Bd -literal -offset indent
+root:lo,ad:no
+jdoe:-fc,ad:+fw
+.Ed
+.Pp
+These settings would cause login/logout and administrative events that
+are performed on behalf of user
+.Dq Li root
+to be audited.
+No failure events are audited.
+For the user
+.Dq Li jdoe ,
+failed file creation events are audited, administrative events are
+audited, and successful file write events are never audited.
+.Sh IMPLEMENTATION NOTES
+Per-user and global audit preselection configuration are evaluated at time of
+login, so users must log out and back in again for audit changes relating to
+preselection to take effect.
+.Pp
+Audit record preselection occurs with respect to the audit identifier
+associated with a process, rather than with respect to the UNIX user or group
+ID.
+The audit identifier is set as part of the user credential context as part of
+login, and typically does not change as a result of running setuid or setgid
+applications, such as
+.Xr su 1 .
+This has the advantage that events that occur after running
+.Xr su 1
+can be audited to the original authenticated user, as required by CAPP, but
+may be surprising if not expected.
+.Sh FILES
+.Bl -tag -width ".Pa /etc/security/audit_user" -compact
+.It Pa /etc/security/audit_user
+.El
+.Sh SEE ALSO
+.Xr login 1 ,
+.Xr su 1 ,
+.Xr audit 4 ,
+.Xr audit_class 5 ,
+.Xr audit_control 5 ,
+.Xr audit_event 5
+.Sh HISTORY
+The OpenBSM implementation was created by McAfee Research, the security
+division of McAfee Inc., under contract to Apple Computer Inc.\& in 2004.
+It was subsequently adopted by the TrustedBSD Project as the foundation for
+the OpenBSM distribution.
+.Sh AUTHORS
+.An -nosplit
+This software was created by McAfee Research, the security research division
+of McAfee, Inc., under contract to Apple Computer Inc.
+Additional authors include
+.An Wayne Salamon ,
+.An Robert Watson ,
+and SPARTA Inc.
+.Pp
+The Basic Security Module (BSM) interface to audit records and audit event
+stream format were defined by Sun Microsystems.
Deleted: vendor/openbsm/1.2_alpha4/man/audit_warn.5
===================================================================
--- vendor/openbsm/dist/man/audit_warn.5 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/man/audit_warn.5 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,76 +0,0 @@
-.\" Copyright (c) 2004 Apple Computer, Inc.
-.\" All rights reserved.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\" notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\" notice, this list of conditions and the following disclaimer in the
-.\" documentation and/or other materials provided with the distribution.
-.\" 3. Neither the name of Apple Computer, Inc. ("Apple") nor the names of
-.\" its contributors may be used to endorse or promote products derived
-.\" from this software without specific prior written permission.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND
-.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-.\" ARE DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR
-.\" ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-.\" STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
-.\" IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-.\" POSSIBILITY OF SUCH DAMAGE.
-.\"
-.\" $P4: //depot/projects/trustedbsd/openbsm/man/audit_warn.5#9 $
-.\"
-.Dd March 17, 2004
-.Dt AUDIT_WARN 5
-.Os
-.Sh NAME
-.Nm audit_warn
-.Nd "alert when audit daemon issues warnings"
-.Sh DESCRIPTION
-The
-.Nm
-script
-runs when
-.Xr auditd 8
-generates warning messages.
-.Pp
-The default
-.Nm
-is a script whose first parameter is the type of warning; the script
-appends its arguments to
-.Pa /etc/security/audit_messages .
-Administrators may replace this script: a more comprehensive one would take
-different actions based on the type of warning.
-For example, a low-space warning
-could result in an email message being sent to the administrator.
-.Sh FILES
-.Bl -tag -width ".Pa /etc/security/audit_messages" -compact
-.It Pa /etc/security/audit_warn
-.It Pa /etc/security/audit_messages
-.El
-.Sh SEE ALSO
-.Xr audit 4 ,
-.Xr auditd 8
-.Sh HISTORY
-The OpenBSM implementation was created by McAfee Research, the security
-division of McAfee Inc., under contract to Apple Computer Inc.\& in 2004.
-It was subsequently adopted by the TrustedBSD Project as the foundation for
-the OpenBSM distribution.
-.Sh AUTHORS
-.An -nosplit
-This software was created by McAfee Research, the security research division
-of McAfee, Inc., under contract to Apple Computer Inc.
-Additional authors include
-.An Wayne Salamon ,
-.An Robert Watson ,
-and SPARTA Inc.
-.Pp
-The Basic Security Module (BSM) interface to audit records and audit event
-stream format were defined by Sun Microsystems.
Copied: vendor/openbsm/1.2_alpha4/man/audit_warn.5 (from rev 11163, vendor/openbsm/dist/man/audit_warn.5)
===================================================================
--- vendor/openbsm/1.2_alpha4/man/audit_warn.5 (rev 0)
+++ vendor/openbsm/1.2_alpha4/man/audit_warn.5 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,74 @@
+.\" Copyright (c) 2004 Apple Inc.
+.\" All rights reserved.
+.\"
+.\" Redistribution and use in source and binary forms, with or without
+.\" modification, are permitted provided that the following conditions
+.\" are met:
+.\" 1. Redistributions of source code must retain the above copyright
+.\" notice, this list of conditions and the following disclaimer.
+.\" 2. Redistributions in binary form must reproduce the above copyright
+.\" notice, this list of conditions and the following disclaimer in the
+.\" documentation and/or other materials provided with the distribution.
+.\" 3. Neither the name of Apple Inc. ("Apple") nor the names of
+.\" its contributors may be used to endorse or promote products derived
+.\" from this software without specific prior written permission.
+.\"
+.\" THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND
+.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+.\" ARE DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR
+.\" ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+.\" STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+.\" IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+.\" POSSIBILITY OF SUCH DAMAGE.
+.\"
+.Dd March 17, 2004
+.Dt AUDIT_WARN 5
+.Os
+.Sh NAME
+.Nm audit_warn
+.Nd "alert when audit daemon issues warnings"
+.Sh DESCRIPTION
+The
+.Nm
+script
+runs when
+.Xr auditd 8
+generates warning messages.
+.Pp
+The default
+.Nm
+is a script whose first parameter is the type of warning; the script
+appends its arguments to
+.Pa /etc/security/audit_messages .
+Administrators may replace this script: a more comprehensive one would take
+different actions based on the type of warning.
+For example, a low-space warning
+could result in an email message being sent to the administrator.
+.Sh FILES
+.Bl -tag -width ".Pa /etc/security/audit_messages" -compact
+.It Pa /etc/security/audit_warn
+.It Pa /etc/security/audit_messages
+.El
+.Sh SEE ALSO
+.Xr audit 4 ,
+.Xr auditd 8
+.Sh HISTORY
+The OpenBSM implementation was created by McAfee Research, the security
+division of McAfee Inc., under contract to Apple Computer Inc.\& in 2004.
+It was subsequently adopted by the TrustedBSD Project as the foundation for
+the OpenBSM distribution.
+.Sh AUTHORS
+.An -nosplit
+This software was created by McAfee Research, the security research division
+of McAfee, Inc., under contract to Apple Computer Inc.
+Additional authors include
+.An Wayne Salamon ,
+.An Robert Watson ,
+and SPARTA Inc.
+.Pp
+The Basic Security Module (BSM) interface to audit records and audit event
+stream format were defined by Sun Microsystems.
Deleted: vendor/openbsm/1.2_alpha4/man/auditctl.2
===================================================================
--- vendor/openbsm/dist/man/auditctl.2 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/man/auditctl.2 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,79 +0,0 @@
-.\"-
-.\" Copyright (c) 2005-2006 Robert N. M. Watson
-.\" All rights reserved.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\" notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\" notice, this list of conditions and the following disclaimer in the
-.\" documentation and/or other materials provided with the distribution.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
-.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-.\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
-.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-.\" SUCH DAMAGE.
-.\"
-.\" $P4: //depot/projects/trustedbsd/openbsm/man/auditctl.2#7 $
-.\"
-.Dd April 19, 2005
-.Dt AUDITCTL 2
-.Os
-.Sh NAME
-.Nm auditctl
-.Nd "configure system audit parameters"
-.Sh SYNOPSIS
-.In bsm/audit.h
-.Ft int
-.Fn auditctl "const char *path"
-.Sh DESCRIPTION
-The
-.Fn auditctl
-system call directs the kernel to open a new audit trail log file.
-It requires an appropriate privilege.
-In the
-.Fx
-implementation,
-.Fn auditctl
-opens new files, but
-.Xr auditon 2
-is used to disable the audit log.
-In the Mac OS X implementation, passing
-.Dv NULL
-to
-.Fn auditctl
-will disable the audit log.
-.Sh RETURN VALUES
-.Rv -std
-.Sh SEE ALSO
-.Xr auditon 2 ,
-.Xr libbsm 3 ,
-.Xr auditd 8
-.Sh HISTORY
-The OpenBSM implementation was created by McAfee Research, the security
-division of McAfee Inc., under contract to Apple Computer Inc.\& in 2004.
-It was subsequently adopted by the TrustedBSD Project as the foundation for
-the OpenBSM distribution.
-.Sh AUTHORS
-.An -nosplit
-This software was created by McAfee Research, the security research division
-of McAfee, Inc., under contract to Apple Computer Inc.
-Additional authors include
-.An Wayne Salamon ,
-.An Robert Watson ,
-and SPARTA Inc.
-.Pp
-The Basic Security Module (BSM) interface to audit records and audit event
-stream format were defined by Sun Microsystems.
-.Pp
-This manual page was written by
-.An Robert Watson Aq rwatson at FreeBSD.org .
Copied: vendor/openbsm/1.2_alpha4/man/auditctl.2 (from rev 11163, vendor/openbsm/dist/man/auditctl.2)
===================================================================
--- vendor/openbsm/1.2_alpha4/man/auditctl.2 (rev 0)
+++ vendor/openbsm/1.2_alpha4/man/auditctl.2 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,83 @@
+.\"-
+.\" Copyright (c) 2005-2006 Robert N. M. Watson
+.\" Copyright (c) 2008 Apple Inc.
+.\" All rights reserved.
+.\"
+.\" Redistribution and use in source and binary forms, with or without
+.\" modification, are permitted provided that the following conditions
+.\" are met:
+.\" 1. Redistributions of source code must retain the above copyright
+.\" notice, this list of conditions and the following disclaimer.
+.\" 2. Redistributions in binary form must reproduce the above copyright
+.\" notice, this list of conditions and the following disclaimer in the
+.\" documentation and/or other materials provided with the distribution.
+.\"
+.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+.\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+.\" SUCH DAMAGE.
+.\"
+.Dd April 19, 2005
+.Dt AUDITCTL 2
+.Os
+.Sh NAME
+.Nm auditctl
+.Nd "configure system audit parameters"
+.Sh SYNOPSIS
+.In bsm/audit.h
+.Ft int
+.Fn auditctl "const char *path"
+.Sh DESCRIPTION
+The
+.Fn auditctl
+system call directs the kernel to open a new audit trail log file.
+It requires an appropriate privilege.
+The
+.Fn auditctl
+system call
+opens new files, but
+.Xr auditon 2
+is used to disable the audit log.
+.Sh RETURN VALUES
+.Rv -std
+.Sh ERRORS
+The
+.Fn auditctl
+system call will fail if:
+.Bl -tag -width Er
+.It Bq Er EINVAL
+The path is invalid.
+.It Bq Er EPERM
+The process does not have sufficient permission to complete the
+operation.
+.El
+.Sh SEE ALSO
+.Xr auditon 2 ,
+.Xr libbsm 3 ,
+.Xr auditd 8
+.Sh HISTORY
+The OpenBSM implementation was created by McAfee Research, the security
+division of McAfee Inc., under contract to Apple Computer Inc.\& in 2004.
+It was subsequently adopted by the TrustedBSD Project as the foundation for
+the OpenBSM distribution.
+.Sh AUTHORS
+.An -nosplit
+This software was created by McAfee Research, the security research division
+of McAfee, Inc., under contract to Apple Computer Inc.
+Additional authors include
+.An Wayne Salamon ,
+.An Robert Watson ,
+and SPARTA Inc.
+.Pp
+The Basic Security Module (BSM) interface to audit records and audit event
+stream format were defined by Sun Microsystems.
+.Pp
+This manual page was written by
+.An Robert Watson Aq rwatson at FreeBSD.org .
Deleted: vendor/openbsm/1.2_alpha4/man/auditon.2
===================================================================
--- vendor/openbsm/dist/man/auditon.2 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/man/auditon.2 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,344 +0,0 @@
-.\"-
-.\" Copyright (c) 2005 Robert N. M. Watson
-.\" Copyright (c) 2005 Tom Rhodes
-.\" Copyright (c) 2005 Wayne J. Salamon
-.\" All rights reserved.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\" notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\" notice, this list of conditions and the following disclaimer in the
-.\" documentation and/or other materials provided with the distribution.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
-.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-.\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
-.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-.\" SUCH DAMAGE.
-.\"
-.\" $P4: //depot/projects/trustedbsd/openbsm/man/auditon.2#11 $
-.\"
-.Dd April 19, 2005
-.Dt AUDITON 2
-.Os
-.Sh NAME
-.Nm auditon
-.Nd "configure system audit parameters"
-.Sh SYNOPSIS
-.In bsm/audit.h
-.Ft int
-.Fn auditon "int cmd" "void *data" "u_int length"
-.Sh DESCRIPTION
-The
-.Fn auditon
-system call is used to manipulate various audit control operations.
-The
-.Fa data
-argument
-should point to a structure whose type depends on the command.
-The
-.Fa length
-argument
-specifies the size of
-.Fa *data
-in bytes.
-The
-.Fa cmd
-argument
-may be any of the following:
-.Bl -tag -width ".It Dv A_GETPINFO_ADDR"
-.It Dv A_SETPOLICY
-Set audit policy flags.
-The
-.Fa data
-argument
-must point to a
-.Vt long
-value set to one of the audit
-policy control values defined in
-.In bsm/audit.h .
-Currently, only
-.Dv AUDIT_CNT
-and
-.Dv AUDIT_AHLT
-are implemented.
-In the
-.Dv AUDIT_CNT
-case, the action will continue regardless if
-an event will not be audited.
-In the
-.Dv AUDIT_AHLT
-case, a
-.Xr panic 9
-will result if an event will not be written to the
-audit log file.
-.It Dv A_SETKAUDIT
-Return
-.Er ENOSYS .
-.It Dv A_SETKMASK
-Set the kernel preselection masks (success and failure).
-The
-.Fa data
-argument
-must point to a
-.Vt au_mask_t
-structure containing the mask values.
-These masks are used for non-attributable audit event preselection.
-.It Dv A_SETQCTRL
-Set kernel audit queue parameters.
-The
-.Fa data
-argument
-must point to a
-.Vt au_qctrl_t
-structure containing the
-kernel audit queue control settings:
-.Dq "high water" ,
-.Dq "low water" ,
-.Dq "output buffer size" ,
-.Dq "percent min free disk space" ,
-and
-.Dq delay
-(not currently used).
-.It Dv A_SETSTAT
-Return
-.Er ENOSYS .
-.It Dv A_SETUMASK
-Return
-.Er ENOSYS .
-.It Dv A_SETSMASK
-Return
-.Er ENOSYS .
-.It Dv A_SETCOND
-Set the current auditing condition.
-The
-.Fa data
-argument
-must point to a
-.Vt long
-value containing the new
-audit condition, one of
-.Dv AUC_AUDITING ,
-.Dv AUC_NOAUDIT ,
-or
-.Dv AUC_DISABLED .
-.It Dv A_SETCLASS
-Set the event class preselection mask for an audit event.
-The
-.Fa data
-argument
-must point to a
-.Vt au_evclass_map_t
-structure containing the audit event and mask.
-.It Dv A_SETPMASK
-Set the preselection masks for a process.
-The
-.Fa data
-argument
-must point to a
-.Vt auditpinfo_t
-structure that contains the given process's audit
-preselection masks for both success and failure.
-.It Dv A_SETFSIZE
-Set the maximum size of the audit log file.
-The
-.Fa data
-argument
-must point to a
-.Vt au_fstat_t
-structure with the
-.Va af_filesz
-field set to the maximum audit log file size.
-A value of 0
-indicates no limit to the size.
-.It Dv A_SETKAUDIT
-Return
-.Er ENOSYS .
-.It Dv A_GETCLASS
-Return the event to class mapping for the designated audit event.
-The
-.Fa data
-argument
-must point to a
-.Vt au_evclass_map_t
-structure.
-.It Dv A_GETKAUDIT
-Return
-.Er ENOSYS .
-.It Dv A_GETPINFO
-Return the audit settings for a process.
-The
-.Fa data
-argument
-must point to a
-.Vt auditpinfo_t
-structure which will be set to contain
-the audit ID, preselection mask, terminal ID, and audit session
-ID of the given process.
-.It Dv A_GETPINFO_ADDR
-Return
-.Er ENOSYS .
-.It Dv A_GETKMASK
-Return the current kernel preselection masks.
-The
-.Fa data
-argument
-must point to a
-.Vt au_mask_t
-structure which will be set to
-the current kernel preselection masks for non-attributable events.
-.It Dv A_GETPOLICY
-Return the current audit policy setting.
-The
-.Fa data
-argument
-must point to a
-.Vt long
-value which will be set to
-one of the current audit policy flags.
-Currently, only
-.Dv AUDIT_CNT
-and
-.Dv AUDIT_AHLT
-are implemented.
-.It Dv A_GETQCTRL
-Return the current kernel audit queue control parameters.
-The
-.Fa data
-argument
-must point to a
-.Vt au_qctrl_t
-structure which will be set to the current
-kernel audit queue control parameters.
-.It Dv A_GETFSIZE
-Returns the maximum size of the audit log file.
-The
-.Fa data
-argument
-must point to a
-.Vt au_fstat_t
-structure.
-The
-.Va af_filesz
-field will be set to the maximum audit log file size.
-A value of 0 indicates no limit to the size.
-The
-.Va af_currsz
-field
-will be set to the current audit log file size.
-.It Dv A_GETCWD
-.\" [COMMENTED OUT]: Valid description, not yet implemented.
-.\" Return the current working directory as stored in the audit subsystem.
-Return
-.Er ENOSYS .
-.It Dv A_GETCAR
-.\" [COMMENTED OUT]: Valid description, not yet implemented.
-.\"Stores and returns the current active root as stored in the audit
-.\"subsystem.
-Return
-.Er ENOSYS .
-.It Dv A_GETSTAT
-.\" [COMMENTED OUT]: Valid description, not yet implemented.
-.\"Return the statistics stored in the audit system.
-Return
-.Er ENOSYS .
-.It Dv A_GETCOND
-Return the current auditing condition.
-The
-.Fa data
-argument
-must point to a
-.Vt long
-value which will be set to
-the current audit condition, either
-.Dv AUC_AUDITING
-or
-.Dv AUC_NOAUDIT .
-.It Dv A_SENDTRIGGER
-Send a trigger to the audit daemon.
-The
-.Fa data
-argument
-must point to a
-.Vt long
-value set to one of the acceptable
-trigger values:
-.Dv AUDIT_TRIGGER_LOW_SPACE
-(low disk space where the audit log resides),
-.Dv AUDIT_TRIGGER_OPEN_NEW
-(open a new audit log file),
-.Dv AUDIT_TRIGGER_READ_FILE
-(read the
-.Pa audit_control
-file),
-.Dv AUDIT_TRIGGER_CLOSE_AND_DIE
-(close the current log file and exit),
-or
-.Dv AUDIT_TRIGGER_NO_SPACE
-(no disk space left for audit log file).
-.El
-.Sh RETURN VALUES
-.Rv -std
-.Sh ERRORS
-The
-.Fn auditon
-function will fail if:
-.Bl -tag -width Er
-.It Bq Er ENOSYS
-Returned by options not yet implemented.
-.It Bq Er EFAULT
-A failure occurred while data transferred to or from
-the kernel failed.
-.It Bq Er EINVAL
-Illegal argument was passed by a system call.
-.It Bq Er EPERM
-The process does not have sufficient permission to complete
-the operation.
-.El
-.Pp
-The
-.Dv A_SENDTRIGGER
-command is specific to the
-.Fx
-and Mac OS X implementations, and is not present in Solaris.
-.Sh SEE ALSO
-.Xr audit 2 ,
-.Xr auditctl 2 ,
-.Xr getaudit 2 ,
-.Xr getaudit_addr 2 ,
-.Xr getauid 2 ,
-.Xr setaudit 2 ,
-.Xr setaudit_addr 2 ,
-.Xr setauid 2 ,
-.Xr libbsm 3
-.Sh HISTORY
-The OpenBSM implementation was created by McAfee Research, the security
-division of McAfee Inc., under contract to Apple Computer Inc.\& in 2004.
-It was subsequently adopted by the TrustedBSD Project as the foundation for
-the OpenBSM distribution.
-.Sh AUTHORS
-.An -nosplit
-This software was created by McAfee Research, the security research division
-of McAfee, Inc., under contract to Apple Computer Inc.
-Additional authors include
-.An Wayne Salamon ,
-.An Robert Watson ,
-and SPARTA Inc.
-.Pp
-The Basic Security Module (BSM) interface to audit records and audit event
-stream format were defined by Sun Microsystems.
-.Pp
-This manual page was written by
-.An Tom Rhodes Aq trhodes at FreeBSD.org ,
-.An Robert Watson Aq rwatson at FreeBSD.org ,
-and
-.An Wayne Salamon Aq wsalamon at FreeBSD.org .
Copied: vendor/openbsm/1.2_alpha4/man/auditon.2 (from rev 11163, vendor/openbsm/dist/man/auditon.2)
===================================================================
--- vendor/openbsm/1.2_alpha4/man/auditon.2 (rev 0)
+++ vendor/openbsm/1.2_alpha4/man/auditon.2 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,504 @@
+.\"-
+.\" Copyright (c) 2008-2009 Apple Inc.
+.\" Copyright (c) 2005 Robert N. M. Watson
+.\" Copyright (c) 2005 Tom Rhodes
+.\" Copyright (c) 2005 Wayne J. Salamon
+.\" All rights reserved.
+.\"
+.\" Redistribution and use in source and binary forms, with or without
+.\" modification, are permitted provided that the following conditions
+.\" are met:
+.\" 1. Redistributions of source code must retain the above copyright
+.\" notice, this list of conditions and the following disclaimer.
+.\" 2. Redistributions in binary form must reproduce the above copyright
+.\" notice, this list of conditions and the following disclaimer in the
+.\" documentation and/or other materials provided with the distribution.
+.\"
+.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+.\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+.\" SUCH DAMAGE.
+.\"
+.Dd January 29, 2009
+.Dt AUDITON 2
+.Os
+.Sh NAME
+.Nm auditon
+.Nd "configure system audit parameters"
+.Sh SYNOPSIS
+.In bsm/audit.h
+.Ft int
+.Fn auditon "int cmd" "void *data" "u_int length"
+.Sh DESCRIPTION
+The
+.Fn auditon
+system call is used to manipulate various audit control operations.
+The
+.Fa data
+argument
+should point to a structure whose type depends on the command.
+The
+.Fa length
+argument
+specifies the size of
+.Fa *data
+in bytes.
+The
+.Fa cmd
+argument
+may be any of the following:
+.Bl -tag -width ".It Dv A_GETPINFO_ADDR"
+.It Dv A_SETPOLICY
+Set audit policy flags.
+The
+.Fa data
+argument
+must point to a
+.Vt int
+value set to one or more the following audit
+policy control values bitwise OR'ed together:
+.Dv AUDIT_CNT ,
+.Dv AUDIT_AHLT ,
+.Dv AUDIT_ARGV ,
+and
+.Dv AUDIT_ARGE .
+If
+.Dv AUDIT_CNT is set, the system will continue even if it becomes low
+on space and discontinue logging events until the low space condition is
+remedied.
+If it is not set, audited events will block until the low space
+condition is remedied.
+Unaudited events, however, are unaffected.
+If
+.Dv AUDIT_AHLT is set, a
+.Xr panic 9
+if it cannot write an event to the global audit log file.
+If
+.Dv AUDIT_ARGV
+is set, then the argument list passed to the
+.Xr execve 2
+system call will be audited. If
+.Dv AUDIT_ARGE
+is set, then the environment variables passed to the
+.Xr execve 2
+system call will be audited. The default policy is none of the audit policy
+control flags set.
+.It Dv A_SETKAUDIT
+Set the host information.
+The
+.Fa data
+argument
+must point to a
+.Vt auditinfo_addr_t
+structure containing the host IP address information.
+After setting, audit records
+that are created as a result of kernel events will contain
+this information.
+.It Dv A_SETKMASK
+Set the kernel preselection masks (success and failure).
+The
+.Fa data
+argument
+must point to a
+.Vt au_mask_t
+structure containing the mask values as defined in
+.In bsm/audit.h .
+These masks are used for non-attributable audit event preselection.
+The field
+.Fa am_success
+specifies which classes of successful audit events are to be logged to the
+audit trail. The field
+.Fa am_failure
+specifies which classes of failed audit events are to be logged. The value of
+both fields is the bitwise OR'ing of the audit event classes specified in
+.Fa bsm/audit.h .
+The various audit classes are described more fully in
+.Xr audit_class 5 .
+.It Dv A_SETQCTRL
+Set kernel audit queue parameters.
+The
+.Fa data
+argument
+must point to a
+.Vt au_qctrl_t
+structure (defined in
+.In bsm/audit.h )
+containing the kernel audit queue control settings:
+.Fa aq_hiwater ,
+.Fa aq_lowater ,
+.Fa aq_bufsz ,
+.Fa aq_delay ,
+and
+.Fa aq_minfree .
+The field
+.Fa aq_hiwater
+defines the maximum number of audit record entries in the queue used to store
+the audit records ready for delivery to disk.
+New records are inserted at the tail of the queue and removed from the head.
+For new records which would exceed the
+high water mark, the calling thread is inserted into the wait queue, waiting
+for the audit queue to have enough space available as defined with the field
+.Fa aq_lowater .
+The field
+.Fa aq_bufsz
+defines the maximum length of the audit record that can be supplied with
+.Xr audit 2 .
+The field
+.Fa aq_delay
+is unused.
+The field
+.Fa aq_minfree
+specifies the minimum amount of free blocks on the disk device used to store
+audit records.
+If the value of free blocks falls below the configured
+minimum amount, the kernel informs the audit daemon about low disk space.
+The value is to be specified in percent of free file system blocks.
+A value of 0 results in a disabling of the check.
+The default and maximum values (default/maximum) for the
+audit queue control parameters are:
+.Pp
+.Bl -column aq_hiwater -offset indent -compact
+.It aq_hiwater Ta 100/10000 (audit records)
+.It aq_lowater Ta 10/aq_hiwater (audit records)
+.It aq_bufsz Ta 32767/1048576 (bytes)
+.It aq_delay Ta (Not currently used.)
+.El
+.It Dv A_SETSTAT
+Return
+.Er ENOSYS .
+(Not implemented.)
+.It Dv A_SETUMASK
+Return
+.Er ENOSYS .
+(Not implemented.)
+.It Dv A_SETSMASK
+Return
+.Er ENOSYS .
+(Not implemented.)
+.It Dv A_SETCOND
+Set the current auditing condition.
+The
+.Fa data
+argument
+must point to a
+.Vt int
+value containing the new
+audit condition, one of
+.Dv AUC_AUDITING ,
+.Dv AUC_NOAUDIT ,
+or
+.Dv AUC_DISABLED .
+If
+.Dv AUC_NOAUDIT
+is set, then auditing is temporarily suspended. If
+.Dv AUC_AUDITING
+is set, auditing is resumed. If
+.Dv AUC_DISABLED
+is set, the auditing system will
+shutdown, draining all audit records and closing out the audit trail file.
+.It Dv A_SETCLASS
+Set the event class preselection mask for an audit event.
+The
+.Fa data
+argument
+must point to a
+.Vt au_evclass_map_t
+structure containing the audit event and mask.
+The field
+.Fa ec_number
+is the audit event and
+.Fa ec_class
+is the audit class mask. See
+.Xr audit_event 5
+for more information on audit event to class mapping.
+.It Dv A_SETPMASK
+Set the preselection masks for a process.
+The
+.Fa data
+argument
+must point to a
+.Vt auditpinfo_t
+structure that contains the given process's audit
+preselection masks for both success and failure.
+The field
+.Fa ap_pid
+is the process id of the target process.
+The field
+.Fa ap_mask
+must point to a
+.Fa au_mask_t
+structure which holds the preselection masks as described in the
+.Dv A_SETKMASK
+section above.
+.It Dv A_SETFSIZE
+Set the maximum size of the audit log file.
+The
+.Fa data
+argument
+must point to a
+.Vt au_fstat_t
+structure with the
+.Va af_filesz
+field set to the maximum audit log file size.
+A value of 0
+indicates no limit to the size.
+.It Dv A_GETCLASS
+Return the event to class mapping for the designated audit event.
+The
+.Fa data
+argument
+must point to a
+.Vt au_evclass_map_t
+structure. See the
+.Dv A_SETCLASS
+section above for more information.
+.It Dv A_GETKAUDIT
+Get the current host information.
+The
+.Fa data
+argument
+must point to a
+.Vt auditinfo_addr_t
+structure.
+.It Dv A_GETPINFO
+Return the audit settings for a process.
+The
+.Fa data
+argument
+must point to a
+.Vt auditpinfo_t
+structure which will be set to contain
+.Fa ap_auid
+(the audit ID),
+.Fa ap_mask
+(the preselection mask),
+.Fa ap_termid
+(the terminal ID), and
+.Fa ap_asid
+(the audit session ID)
+of the given target process.
+The process ID of the target process is passed
+into the kernel using the
+.Fa ap_pid
+field.
+See the section
+.Dv A_SETPMASK
+above and
+.Xr getaudit 2
+for more information.
+.It Dv A_GETPINFO_ADDR
+Return the extended audit settings for a process.
+The
+.Fa data
+argument
+must point to a
+.Vt auditpinfo_addr_t
+structure which is similar to the
+.Vt auditpinfo_addr_t
+structure described above.
+The exception is the
+.Fa ap_termid
+(the terminal ID) field which points to a
+.Vt au_tid_addr_t
+structure can hold much a larger terminal address and an address type.
+The process ID of the target process is passed into the kernel using the
+.Fa ap_pid
+field.
+See the section
+.Dv A_SETPMASK
+above and
+.Xr getaudit 2
+for more information.
+.It Dv A_GETSINFO_ADDR
+Return the extended audit settings for a session.
+The
+.Fa data
+argument
+must point to a
+.Vt auditinfo_addr_t
+structure.
+The audit session ID of the target session is passed
+into the kernel using the
+.Fa ai_asid
+field. See
+.Xr getaudit_addr 2
+for more information about the
+.Vt auditinfo_addr_t
+structure.
+.It Dv A_GETKMASK
+Return the current kernel preselection masks.
+The
+.Fa data
+argument
+must point to a
+.Vt au_mask_t
+structure which will be set to
+the current kernel preselection masks for non-attributable events.
+.It Dv A_GETPOLICY
+Return the current audit policy setting.
+The
+.Fa data
+argument
+must point to a
+.Vt int
+value which will be set to
+one of the current audit policy flags.
+The audit policy flags are
+described in the
+.Dv A_SETPOLICY
+section above.
+.It Dv A_GETQCTRL
+Return the current kernel audit queue control parameters.
+The
+.Fa data
+argument
+must point to a
+.Vt au_qctrl_t
+structure which will be set to the current
+kernel audit queue control parameters.
+See the
+.Dv A_SETQCTL
+section above for more information.
+.It Dv A_GETFSIZE
+Returns the maximum size of the audit log file.
+The
+.Fa data
+argument
+must point to a
+.Vt au_fstat_t
+structure.
+The
+.Va af_filesz
+field will be set to the maximum audit log file size.
+A value of 0 indicates no limit to the size.
+The
+.Va af_currsz
+field
+will be set to the current audit log file size.
+.It Dv A_GETCWD
+.\" [COMMENTED OUT]: Valid description, not yet implemented.
+.\" Return the current working directory as stored in the audit subsystem.
+Return
+.Er ENOSYS .
+(Not implemented.)
+.It Dv A_GETCAR
+.\" [COMMENTED OUT]: Valid description, not yet implemented.
+.\"Stores and returns the current active root as stored in the audit
+.\"subsystem.
+Return
+.Er ENOSYS .
+(Not implemented.)
+.It Dv A_GETSTAT
+.\" [COMMENTED OUT]: Valid description, not yet implemented.
+.\"Return the statistics stored in the audit system.
+Return
+.Er ENOSYS .
+(Not implemented.)
+.It Dv A_GETCOND
+Return the current auditing condition.
+The
+.Fa data
+argument
+must point to a
+.Vt int
+value which will be set to
+the current audit condition, one of
+.Dv AUC_AUDITING ,
+.Dv AUC_NOAUDIT
+or
+.Dv AUC_DISABLED .
+See the
+.Dv A_SETCOND
+section above for more information.
+.It Dv A_SENDTRIGGER
+Send a trigger to the audit daemon.
+The
+.Fa data
+argument
+must point to a
+.Vt int
+value set to one of the acceptable
+trigger values:
+.Dv AUDIT_TRIGGER_LOW_SPACE
+(low disk space where the audit log resides),
+.Dv AUDIT_TRIGGER_OPEN_NEW
+(open a new audit log file),
+.Dv AUDIT_TRIGGER_READ_FILE
+(read the
+.Pa audit_control
+file),
+.Dv AUDIT_TRIGGER_CLOSE_AND_DIE
+(close the current log file and exit),
+.Dv AUDIT_TRIGGER_NO_SPACE
+(no disk space left for audit log file).
+.Dv AUDIT_TRIGGER_ROTATE_USER
+(request audit log file rotation).
+.Dv AUDIT_TRIGGER_INITIALIZE
+(initialize audit subsystem for Mac OS X only).
+or
+.Dv AUDIT_TRIGGER_EXPIRE_TRAILS
+(request audit log file expiration).
+.El
+.Sh RETURN VALUES
+.Rv -std
+.Sh ERRORS
+The
+.Fn auditon
+function will fail if:
+.Bl -tag -width Er
+.It Bq Er ENOSYS
+Returned by options not yet implemented.
+.It Bq Er EFAULT
+A failure occurred while data transferred to or from
+the kernel failed.
+.It Bq Er EINVAL
+Illegal argument was passed by a system call.
+.It Bq Er EPERM
+The process does not have sufficient permission to complete
+the operation.
+.El
+.Pp
+The
+.Dv A_SENDTRIGGER
+command is specific to the
+.Fx
+and Mac OS X implementations, and is not present in Solaris.
+.Sh SEE ALSO
+.Xr audit 2 ,
+.Xr auditctl 2 ,
+.Xr getaudit 2 ,
+.Xr getaudit_addr 2 ,
+.Xr getauid 2 ,
+.Xr setaudit 2 ,
+.Xr setaudit_addr 2 ,
+.Xr setauid 2 ,
+.Xr libbsm 3
+.Sh HISTORY
+The OpenBSM implementation was created by McAfee Research, the security
+division of McAfee Inc., under contract to Apple Computer Inc.\& in 2004.
+It was subsequently adopted by the TrustedBSD Project as the foundation for
+the OpenBSM distribution.
+.Sh AUTHORS
+.An -nosplit
+This software was created by McAfee Research, the security research division
+of McAfee, Inc., under contract to Apple Computer Inc.
+Additional authors include
+.An Wayne Salamon ,
+.An Robert Watson ,
+and SPARTA Inc.
+.Pp
+The Basic Security Module (BSM) interface to audit records and audit event
+stream format were defined by Sun Microsystems.
+.Pp
+This manual page was written by
+.An Tom Rhodes Aq trhodes at FreeBSD.org ,
+.An Robert Watson Aq rwatson at FreeBSD.org ,
+and
+.An Wayne Salamon Aq wsalamon at FreeBSD.org .
Deleted: vendor/openbsm/1.2_alpha4/man/getaudit.2
===================================================================
--- vendor/openbsm/dist/man/getaudit.2 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/man/getaudit.2 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,85 +0,0 @@
-.\"-
-.\" Copyright (c) 2005 Robert N. M. Watson
-.\" All rights reserved.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\" notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\" notice, this list of conditions and the following disclaimer in the
-.\" documentation and/or other materials provided with the distribution.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
-.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-.\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
-.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-.\" SUCH DAMAGE.
-.\"
-.\" $P4: //depot/projects/trustedbsd/openbsm/man/getaudit.2#7 $
-.\"
-.Dd April 19, 2005
-.Dt GETAUDIT 2
-.Os
-.Sh NAME
-.Nm getaudit ,
-.Nm getaudit_addr
-.Nd "retrieve audit session state"
-.Sh SYNOPSIS
-.In bsm/audit.h
-.Ft int
-.Fn getaudit "auditinfo_t *auditinfo"
-.Ft int
-.Fn getaudit_addr "auditinfo_addr_t *auditinfo_addr" "u_int length"
-.Sh DESCRIPTION
-The
-.Fn getaudit
-system call
-retrieves the active audit session state for the current process via the
-.Vt auditinfo_t
-pointed to by
-.Fa auditinfo .
-The
-.Fn getaudit_addr
-system call
-retrieves extended state via
-.Fa auditinfo_addr
-and
-.Fa length .
-.Pp
-These system calls require an appropriate privilege to complete.
-.Sh RETURN VALUES
-.Rv -std getaudit getaudit_addr
-.Sh SEE ALSO
-.Xr audit 2 ,
-.Xr auditon 2 ,
-.Xr getauid 2 ,
-.Xr setaudit 2 ,
-.Xr setauid 2 ,
-.Xr libbsm 3
-.Sh HISTORY
-The OpenBSM implementation was created by McAfee Research, the security
-division of McAfee Inc., under contract to Apple Computer Inc.\& in 2004.
-It was subsequently adopted by the TrustedBSD Project as the foundation for
-the OpenBSM distribution.
-.Sh AUTHORS
-.An -nosplit
-This software was created by McAfee Research, the security research division
-of McAfee, Inc., under contract to Apple Computer Inc.
-Additional authors include
-.An Wayne Salamon ,
-.An Robert Watson ,
-and SPARTA Inc.
-.Pp
-The Basic Security Module (BSM) interface to audit records and audit event
-stream format were defined by Sun Microsystems.
-.Pp
-This manual page was written by
-.An Robert Watson Aq rwatson at FreeBSD.org .
Copied: vendor/openbsm/1.2_alpha4/man/getaudit.2 (from rev 11163, vendor/openbsm/dist/man/getaudit.2)
===================================================================
--- vendor/openbsm/1.2_alpha4/man/getaudit.2 (rev 0)
+++ vendor/openbsm/1.2_alpha4/man/getaudit.2 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,186 @@
+.\"-
+.\" Copyright (c) 2005 Robert N. M. Watson
+.\" Copyright (c) 2008 Apple Inc.
+.\" All rights reserved.
+.\"
+.\" Redistribution and use in source and binary forms, with or without
+.\" modification, are permitted provided that the following conditions
+.\" are met:
+.\" 1. Redistributions of source code must retain the above copyright
+.\" notice, this list of conditions and the following disclaimer.
+.\" 2. Redistributions in binary form must reproduce the above copyright
+.\" notice, this list of conditions and the following disclaimer in the
+.\" documentation and/or other materials provided with the distribution.
+.\"
+.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+.\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+.\" SUCH DAMAGE.
+.\"
+.Dd October 19, 2008
+.Dt GETAUDIT 2
+.Os
+.Sh NAME
+.Nm getaudit ,
+.Nm getaudit_addr
+.Nd "retrieve audit session state"
+.Sh SYNOPSIS
+.In bsm/audit.h
+.Ft int
+.Fn getaudit "auditinfo_t *auditinfo"
+.Ft int
+.Fn getaudit_addr "auditinfo_addr_t *auditinfo_addr" "u_int length"
+.Sh DESCRIPTION
+The
+.Fn getaudit
+system call
+retrieves the active audit session state for the current process via the
+.Vt auditinfo_t
+pointed to by
+.Fa auditinfo .
+The
+.Fn getaudit_addr
+system call
+retrieves extended state via
+.Fa auditinfo_addr
+and
+.Fa length .
+.Pp
+The
+.Fa auditinfo_t
+data structure is defined as follows:
+.Bd -literal -offset indent
+struct auditinfo {
+ au_id_t ai_auid; /* Audit user ID */
+ au_mask_t ai_mask; /* Audit masks */
+ au_tid_t ai_termid; /* Terminal ID */
+ au_asid_t ai_asid; /* Audit session ID */
+};
+typedef struct auditinfo auditinfo_t;
+.Ed
+.Pp
+The
+.Fa ai_auid
+variable contains the audit identifier which is recorded in the audit log for
+each event the process caused.
+.Pp
+The
+.Fa au_mask_t
+data structure defines the bit mask for auditing successful and failed events
+out of the predefined list of event classes.
+It is defined as follows:
+.Bd -literal -offset indent
+struct au_mask {
+ unsigned int am_success; /* success bits */
+ unsigned int am_failure; /* failure bits */
+};
+typedef struct au_mask au_mask_t;
+.Ed
+.Pp
+The
+.Fa au_termid_t
+data structure defines the Terminal ID recorded with every event caused by the
+process.
+It is defined as follows:
+.Bd -literal -offset indent
+struct au_tid {
+ dev_t port;
+ u_int32_t machine;
+};
+typedef struct au_tid au_tid_t;
+.Ed
+.Pp
+The
+.Fa ai_asid
+variable contains the audit session ID which is recorded with every event
+caused by the process.
+.Pp
+The
+.Fn getaudit_addr
+system call
+uses the expanded
+.Fa auditinfo_addr_t
+data structure and supports Terminal IDs with larger addresses
+such as those used in IP version 6.
+It is defined as follows:
+.Bd -literal -offset indent
+struct auditinfo_addr {
+ au_id_t ai_auid; /* Audit user ID. */
+ au_mask_t ai_mask; /* Audit masks. */
+ au_tid_addr_t ai_termid; /* Terminal ID. */
+ au_asid_t ai_asid; /* Audit session ID. */
+};
+typedef struct auditinfo_addr auditinfo_addr_t;
+.Ed
+.Pp
+The
+.Fa au_tid_addr_t
+data structure which includes a larger address storage field and an additional
+field with the type of address stored:
+.Bd -literal -offset indent
+struct au_tid_addr {
+ dev_t at_port;
+ u_int32_t at_type;
+ u_int32_t at_addr[4];
+};
+typedef struct au_tid_addr au_tid_addr_t;
+.Ed
+.Pp
+These system calls require an appropriate privilege to complete.
+.Sh RETURN VALUES
+.Rv -std getaudit getaudit_addr
+.Sh ERRORS
+The
+.Fn getaudit
+function will fail if:
+.Bl -tag -width Er
+.It Bq Er EFAULT
+A failure occurred while data transferred to or from
+the kernel failed.
+.It Bq Er EINVAL
+Illegal argument was passed by a system call.
+.It Bq Er EPERM
+The process does not have sufficient permission to complete
+the operation.
+.It Bq Er EOVERFLOW
+The
+.Fa length
+argument indicates an overflow condition will occur.
+.It Bq Er E2BIG
+The address is too big and, therefore,
+.Fn getaudit_addr
+should be used instead.
+.El
+.Sh SEE ALSO
+.Xr audit 2 ,
+.Xr auditon 2 ,
+.Xr getauid 2 ,
+.Xr setaudit 2 ,
+.Xr setauid 2 ,
+.Xr libbsm 3
+.Sh HISTORY
+The OpenBSM implementation was created by McAfee Research, the security
+division of McAfee Inc., under contract to Apple Computer Inc.\& in 2004.
+It was subsequently adopted by the TrustedBSD Project as the foundation for
+the OpenBSM distribution.
+.Sh AUTHORS
+.An -nosplit
+This software was created by McAfee Research, the security research division
+of McAfee, Inc., under contract to Apple Computer Inc.
+Additional authors include
+.An Wayne Salamon ,
+.An Robert Watson ,
+and SPARTA Inc.
+.Pp
+The Basic Security Module (BSM) interface to audit records and audit event
+stream format were defined by Sun Microsystems.
+.Pp
+This manual page was written by
+.An Robert Watson Aq rwatson at FreeBSD.org .
Deleted: vendor/openbsm/1.2_alpha4/man/getauid.2
===================================================================
--- vendor/openbsm/dist/man/getauid.2 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/man/getauid.2 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,77 +0,0 @@
-.\"-
-.\" Copyright (c) 2005 Robert N. M. Watson
-.\" All rights reserved.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\" notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\" notice, this list of conditions and the following disclaimer in the
-.\" documentation and/or other materials provided with the distribution.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
-.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-.\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
-.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-.\" SUCH DAMAGE.
-.\"
-.\" $P4: //depot/projects/trustedbsd/openbsm/man/getauid.2#7 $
-.\"
-.Dd April 19, 2005
-.Dt GETAUID 2
-.Os
-.Sh NAME
-.Nm getauid
-.Nd "retrieve audit session ID"
-.Sh SYNOPSIS
-.In bsm/audit.h
-.Ft int
-.Fn getauid "au_id_t *auid"
-.Sh DESCRIPTION
-The
-.Fn getauid
-system call
-retrieves the active audit session ID for the current process via the
-.Vt au_id_t
-pointed to by
-.Fa auid .
-.Pp
-This system call requires an appropriate privilege to complete.
-.Sh RETURN VALUES
-.Rv -std
-.Sh SEE ALSO
-.Xr audit 2 ,
-.Xr auditon 2 ,
-.Xr getaudit 2 ,
-.Xr getaudit_addr 2 ,
-.Xr setaudit 2 ,
-.Xr setaudit_addr 2 ,
-.Xr setauid 2 ,
-.Xr libbsm 3
-.Sh HISTORY
-The OpenBSM implementation was created by McAfee Research, the security
-division of McAfee Inc., under contract to Apple Computer Inc.\& in 2004.
-It was subsequently adopted by the TrustedBSD Project as the foundation for
-the OpenBSM distribution.
-.Sh AUTHORS
-.An -nosplit
-This software was created by McAfee Research, the security research division
-of McAfee, Inc., under contract to Apple Computer Inc.
-Additional authors include
-.An Wayne Salamon ,
-.An Robert Watson ,
-and SPARTA Inc.
-.Pp
-The Basic Security Module (BSM) interface to audit records and audit event
-stream format were defined by Sun Microsystems.
-.Pp
-This manual page was written by
-.An Robert Watson Aq rwatson at FreeBSD.org .
Copied: vendor/openbsm/1.2_alpha4/man/getauid.2 (from rev 11163, vendor/openbsm/dist/man/getauid.2)
===================================================================
--- vendor/openbsm/1.2_alpha4/man/getauid.2 (rev 0)
+++ vendor/openbsm/1.2_alpha4/man/getauid.2 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,88 @@
+.\"-
+.\" Copyright (c) 2005 Robert N. M. Watson
+.\" Copyright (c) 2008 Apple Inc.
+.\" All rights reserved.
+.\"
+.\" Redistribution and use in source and binary forms, with or without
+.\" modification, are permitted provided that the following conditions
+.\" are met:
+.\" 1. Redistributions of source code must retain the above copyright
+.\" notice, this list of conditions and the following disclaimer.
+.\" 2. Redistributions in binary form must reproduce the above copyright
+.\" notice, this list of conditions and the following disclaimer in the
+.\" documentation and/or other materials provided with the distribution.
+.\"
+.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+.\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+.\" SUCH DAMAGE.
+.\"
+.Dd April 19, 2005
+.Dt GETAUID 2
+.Os
+.Sh NAME
+.Nm getauid
+.Nd "retrieve audit session ID"
+.Sh SYNOPSIS
+.In bsm/audit.h
+.Ft int
+.Fn getauid "au_id_t *auid"
+.Sh DESCRIPTION
+The
+.Fn getauid
+system call
+retrieves the active audit session ID for the current process via the
+.Vt au_id_t
+pointed to by
+.Fa auid .
+.Pp
+This system call requires an appropriate privilege to complete.
+.Sh RETURN VALUES
+.Rv -std
+.Sh ERRORS
+The
+.Fn getauid
+function will fail if:
+.Bl -tag -width Er
+.It Bq Er EFAULT
+A failure occurred while data transferred from
+the kernel failed.
+.It Bq Er EPERM
+The process does not have sufficient permission to complete
+the operation.
+.El
+.Sh SEE ALSO
+.Xr audit 2 ,
+.Xr auditon 2 ,
+.Xr getaudit 2 ,
+.Xr getaudit_addr 2 ,
+.Xr setaudit 2 ,
+.Xr setaudit_addr 2 ,
+.Xr setauid 2 ,
+.Xr libbsm 3
+.Sh HISTORY
+The OpenBSM implementation was created by McAfee Research, the security
+division of McAfee Inc., under contract to Apple Computer Inc.\& in 2004.
+It was subsequently adopted by the TrustedBSD Project as the foundation for
+the OpenBSM distribution.
+.Sh AUTHORS
+.An -nosplit
+This software was created by McAfee Research, the security research division
+of McAfee, Inc., under contract to Apple Computer Inc.
+Additional authors include
+.An Wayne Salamon ,
+.An Robert Watson ,
+and SPARTA Inc.
+.Pp
+The Basic Security Module (BSM) interface to audit records and audit event
+stream format were defined by Sun Microsystems.
+.Pp
+This manual page was written by
+.An Robert Watson Aq rwatson at FreeBSD.org .
Deleted: vendor/openbsm/1.2_alpha4/man/setaudit.2
===================================================================
--- vendor/openbsm/dist/man/setaudit.2 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/man/setaudit.2 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,85 +0,0 @@
-.\"-
-.\" Copyright (c) 2005 Robert N. M. Watson
-.\" All rights reserved.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\" notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\" notice, this list of conditions and the following disclaimer in the
-.\" documentation and/or other materials provided with the distribution.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
-.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-.\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
-.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-.\" SUCH DAMAGE.
-.\"
-.\" $P4: //depot/projects/trustedbsd/openbsm/man/setaudit.2#7 $
-.\"
-.Dd April 19, 2005
-.Dt SETAUDIT 2
-.Os
-.Sh NAME
-.Nm setaudit ,
-.Nm setaudit_addr
-.Nd "set audit session state"
-.Sh SYNOPSIS
-.In bsm/audit.h
-.Ft int
-.Fn setaudit "auditinfo_t *auditinfo"
-.Ft int
-.Fn setaudit_addr "auditinfo_addr_t *auditinfo_addr" "u_int length"
-.Sh DESCRIPTION
-The
-.Fn setaudit
-system call
-sets the active audit session state for the current process via the
-.Vt auditinfo_t
-pointed to by
-.Fa auditinfo .
-The
-.Fn setaudit_addr
-system call
-sets extended state via
-.Fa auditinfo_addr
-and
-.Fa length .
-.Pp
-These system calls require an appropriate privilege to complete.
-.Sh RETURN VALUES
-.Rv -std setaudit setaudit_addr
-.Sh SEE ALSO
-.Xr audit 2 ,
-.Xr auditon 2 ,
-.Xr getaudit 2 ,
-.Xr getauid 2 ,
-.Xr setauid 2 ,
-.Xr libbsm 3
-.Sh HISTORY
-The OpenBSM implementation was created by McAfee Research, the security
-division of McAfee Inc., under contract to Apple Computer Inc.\& in 2004.
-It was subsequently adopted by the TrustedBSD Project as the foundation for
-the OpenBSM distribution.
-.Sh AUTHORS
-.An -nosplit
-This software was created by McAfee Research, the security research division
-of McAfee, Inc., under contract to Apple Computer Inc.
-Additional authors include
-.An Wayne Salamon ,
-.An Robert Watson ,
-and SPARTA Inc.
-.Pp
-The Basic Security Module (BSM) interface to audit records and audit event
-stream format were defined by Sun Microsystems.
-.Pp
-This manual page was written by
-.An Robert Watson Aq rwatson at FreeBSD.org .
Copied: vendor/openbsm/1.2_alpha4/man/setaudit.2 (from rev 11163, vendor/openbsm/dist/man/setaudit.2)
===================================================================
--- vendor/openbsm/1.2_alpha4/man/setaudit.2 (rev 0)
+++ vendor/openbsm/1.2_alpha4/man/setaudit.2 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,172 @@
+.\"-
+.\" Copyright (c) 2005 Robert N. M. Watson
+.\" Copyright (c) 2008 Apple Inc.
+.\" All rights reserved.
+.\"
+.\" Redistribution and use in source and binary forms, with or without
+.\" modification, are permitted provided that the following conditions
+.\" are met:
+.\" 1. Redistributions of source code must retain the above copyright
+.\" notice, this list of conditions and the following disclaimer.
+.\" 2. Redistributions in binary form must reproduce the above copyright
+.\" notice, this list of conditions and the following disclaimer in the
+.\" documentation and/or other materials provided with the distribution.
+.\"
+.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+.\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+.\" SUCH DAMAGE.
+.\"
+.Dd April 19, 2005
+.Dt SETAUDIT 2
+.Os
+.Sh NAME
+.Nm setaudit ,
+.Nm setaudit_addr
+.Nd "set audit session state"
+.Sh SYNOPSIS
+.In bsm/audit.h
+.Ft int
+.Fn setaudit "auditinfo_t *auditinfo"
+.Ft int
+.Fn setaudit_addr "auditinfo_addr_t *auditinfo_addr" "u_int length"
+.Sh DESCRIPTION
+The
+.Fn setaudit
+system call
+sets the active audit session state for the current process via the
+.Vt auditinfo_t
+pointed to by
+.Fa auditinfo .
+The
+.Fn setaudit_addr
+system call
+sets extended state via
+.Fa auditinfo_addr
+and
+.Fa length .
+.Pp
+The
+.Fa auditinfo_t
+data structure is defined as follows:
+.Bd -literal -offset 4n
+struct auditinfo {
+ au_id_t ai_auid; /* Audit user ID */
+ au_mask_t ai_mask; /* Audit masks */
+ au_tid_t ai_termid; /* Terminal ID */
+ au_asid_t ai_asid; /* Audit session ID */
+};
+typedef struct auditinfo auditinfo_t;
+.Ed
+.Pp
+The
+.Fa ai_auid
+variable contains the audit identifier which is recorded in the audit log for
+each event the process caused.
+.Pp
+The
+.Fa au_mask_t
+data structure defines the bit mask for auditing successful and failed events
+out of the predefined list of event classes. It is defined as follows:
+.Bd -literal -offset 4n
+struct au_mask {
+ unsigned int am_success; /* success bits */
+ unsigned int am_failure; /* failure bits */
+};
+typedef struct au_mask au_mask_t;
+.Ed
+.Pp
+The
+.Fa au_termid_t
+data structure defines the Terminal ID recorded with every event caused by the
+process. It is defined as follows:
+.Bd -literal -offset 4n
+struct au_tid {
+ dev_t port;
+ u_int32_t machine;
+};
+typedef struct au_tid au_tid_t;
+.Ed
+.Pp
+The
+.Fa ai_asid
+variable contains the audit session ID which is recorded with every event
+caused by the process.
+.Pp
+The
+.Fn setaudit_addr
+system call
+uses the expanded
+.Fa auditinfo_addr_t
+data structure supports Terminal IDs with larger addresses such as those used
+in IP version 6. It is defined as follows:
+.Bd -literal -offset 4n
+struct auditinfo_addr {
+ au_id_t ai_auid; /* Audit user ID. */
+ au_mask_t ai_mask; /* Audit masks. */
+ au_tid_addr_t ai_termid; /* Terminal ID. */
+ au_asid_t ai_asid; /* Audit session ID. */
+};
+typedef struct auditinfo_addr auditinfo_addr_t;
+.Ed
+.Pp
+The
+.Fa au_tid_addr_t
+data structure which includes a larger address storage field and an additional
+field with the type of address stored:
+.Bd -literal -offset 4n
+struct au_tid_addr {
+ dev_t at_port;
+ u_int32_t at_type;
+ u_int32_t at_addr[4];
+};
+typedef struct au_tid_addr au_tid_addr_t;
+.Ed
+.Pp
+These system calls require an appropriate privilege to complete.
+.Sh RETURN VALUES
+.Rv -std setaudit setaudit_addr
+.Sh ERRORS
+.Bl -tag -width Er
+.It Bq Er EFAULT
+A failure occurred while data transferred to or from
+the kernel failed.
+.It Bq Er EINVAL
+Illegal argument was passed by a system call.
+.It Bq Er EPERM
+The process does not have sufficient permission to complete
+the operation.
+.El
+.Sh SEE ALSO
+.Xr audit 2 ,
+.Xr auditon 2 ,
+.Xr getaudit 2 ,
+.Xr getauid 2 ,
+.Xr setauid 2 ,
+.Xr libbsm 3
+.Sh HISTORY
+The OpenBSM implementation was created by McAfee Research, the security
+division of McAfee Inc., under contract to Apple Computer Inc.\& in 2004.
+It was subsequently adopted by the TrustedBSD Project as the foundation for
+the OpenBSM distribution.
+.Sh AUTHORS
+.An -nosplit
+This software was created by McAfee Research, the security research division
+of McAfee, Inc., under contract to Apple Computer Inc.
+Additional authors include
+.An Wayne Salamon ,
+.An Robert Watson ,
+and SPARTA Inc.
+.Pp
+The Basic Security Module (BSM) interface to audit records and audit event
+stream format were defined by Sun Microsystems.
+.Pp
+This manual page was written by
+.An Robert Watson Aq rwatson at FreeBSD.org .
Deleted: vendor/openbsm/1.2_alpha4/man/setauid.2
===================================================================
--- vendor/openbsm/dist/man/setauid.2 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/man/setauid.2 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,77 +0,0 @@
-.\"-
-.\" Copyright (c) 2005 Robert N. M. Watson
-.\" All rights reserved.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\" notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\" notice, this list of conditions and the following disclaimer in the
-.\" documentation and/or other materials provided with the distribution.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
-.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-.\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
-.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-.\" SUCH DAMAGE.
-.\"
-.\" $P4: //depot/projects/trustedbsd/openbsm/man/setauid.2#7 $
-.\"
-.Dd April 19, 2005
-.Dt SETAUID 2
-.Os
-.Sh NAME
-.Nm setauid
-.Nd "set audit session ID"
-.Sh SYNOPSIS
-.In bsm/audit.h
-.Ft int
-.Fn setauid "au_id_t *auid"
-.Sh DESCRIPTION
-The
-.Fn setauid
-system call
-sets the active audit session ID for the current process from the
-.Vt au_id_t
-pointed to by
-.Fa auid .
-.Pp
-This system call requires an appropriate privilege to complete.
-.Sh RETURN VALUES
-.Rv -std
-.Sh SEE ALSO
-.Xr audit 2 ,
-.Xr auditon 2 ,
-.Xr getaudit 2 ,
-.Xr getaudit_addr 2 ,
-.Xr getauid 2 ,
-.Xr setaudit 2 ,
-.Xr setaudit_addr 2 ,
-.Xr libbsm 3
-.Sh HISTORY
-The OpenBSM implementation was created by McAfee Research, the security
-division of McAfee Inc., under contract to Apple Computer Inc.\& in 2004.
-It was subsequently adopted by the TrustedBSD Project as the foundation for
-the OpenBSM distribution.
-.Sh AUTHORS
-.An -nosplit
-This software was created by McAfee Research, the security research division
-of McAfee, Inc., under contract to Apple Computer Inc.
-Additional authors include
-.An Wayne Salamon ,
-.An Robert Watson ,
-and SPARTA Inc.
-.Pp
-The Basic Security Module (BSM) interface to audit records and audit event
-stream format were defined by Sun Microsystems.
-.Pp
-This manual page was written by
-.An Robert Watson Aq rwatson at FreeBSD.org .
Copied: vendor/openbsm/1.2_alpha4/man/setauid.2 (from rev 11163, vendor/openbsm/dist/man/setauid.2)
===================================================================
--- vendor/openbsm/1.2_alpha4/man/setauid.2 (rev 0)
+++ vendor/openbsm/1.2_alpha4/man/setauid.2 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,88 @@
+.\"-
+.\" Copyright (c) 2005 Robert N. M. Watson
+.\" Copyright (c) 2008 Apple Inc.
+.\" All rights reserved.
+.\"
+.\" Redistribution and use in source and binary forms, with or without
+.\" modification, are permitted provided that the following conditions
+.\" are met:
+.\" 1. Redistributions of source code must retain the above copyright
+.\" notice, this list of conditions and the following disclaimer.
+.\" 2. Redistributions in binary form must reproduce the above copyright
+.\" notice, this list of conditions and the following disclaimer in the
+.\" documentation and/or other materials provided with the distribution.
+.\"
+.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+.\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+.\" SUCH DAMAGE.
+.\"
+.Dd April 19, 2005
+.Dt SETAUID 2
+.Os
+.Sh NAME
+.Nm setauid
+.Nd "set audit session ID"
+.Sh SYNOPSIS
+.In bsm/audit.h
+.Ft int
+.Fn setauid "au_id_t *auid"
+.Sh DESCRIPTION
+The
+.Fn setauid
+system call
+sets the active audit session ID for the current process from the
+.Vt au_id_t
+pointed to by
+.Fa auid .
+.Pp
+This system call requires an appropriate privilege to complete.
+.Sh RETURN VALUES
+.Rv -std
+.Sh ERRORS
+The
+.Fn setauid
+function will fail if:
+.Bl -tag -width Er
+.It Bq Er EFAULT
+A failure occurred while data transferred to
+the kernel failed.
+.It Bq Er EPERM
+The process does not have sufficient permission to complete
+the operation.
+.El
+.Sh SEE ALSO
+.Xr audit 2 ,
+.Xr auditon 2 ,
+.Xr getaudit 2 ,
+.Xr getaudit_addr 2 ,
+.Xr getauid 2 ,
+.Xr setaudit 2 ,
+.Xr setaudit_addr 2 ,
+.Xr libbsm 3
+.Sh HISTORY
+The OpenBSM implementation was created by McAfee Research, the security
+division of McAfee Inc., under contract to Apple Computer Inc.\& in 2004.
+It was subsequently adopted by the TrustedBSD Project as the foundation for
+the OpenBSM distribution.
+.Sh AUTHORS
+.An -nosplit
+This software was created by McAfee Research, the security research division
+of McAfee, Inc., under contract to Apple Computer Inc.
+Additional authors include
+.An Wayne Salamon ,
+.An Robert Watson ,
+and SPARTA Inc.
+.Pp
+The Basic Security Module (BSM) interface to audit records and audit event
+stream format were defined by Sun Microsystems.
+.Pp
+This manual page was written by
+.An Robert Watson Aq rwatson at FreeBSD.org .
Deleted: vendor/openbsm/1.2_alpha4/modules/Makefile.am
===================================================================
--- vendor/openbsm/dist/modules/Makefile.am 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/modules/Makefile.am 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,7 +0,0 @@
-#
-# $P4: //depot/projects/trustedbsd/openbsm/modules/Makefile.am#1 $
-#
-
-SUBDIRS = \
- auditfilter_noop
-
Copied: vendor/openbsm/1.2_alpha4/modules/Makefile.am (from rev 11163, vendor/openbsm/dist/modules/Makefile.am)
===================================================================
--- vendor/openbsm/1.2_alpha4/modules/Makefile.am (rev 0)
+++ vendor/openbsm/1.2_alpha4/modules/Makefile.am 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,3 @@
+SUBDIRS = \
+ auditfilter_noop
+
Deleted: vendor/openbsm/1.2_alpha4/modules/Makefile.in
===================================================================
--- vendor/openbsm/dist/modules/Makefile.in 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/modules/Makefile.in 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,487 +0,0 @@
-# Makefile.in generated by automake 1.10 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
- at SET_MAKE@
-
-#
-# $P4: //depot/projects/trustedbsd/openbsm/modules/Makefile.in#2 $
-#
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = modules
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/config/config.h
-CONFIG_CLEAN_FILES =
-SOURCES =
-DIST_SOURCES =
-RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
- html-recursive info-recursive install-data-recursive \
- install-dvi-recursive install-exec-recursive \
- install-html-recursive install-info-recursive \
- install-pdf-recursive install-ps-recursive install-recursive \
- installcheck-recursive installdirs-recursive pdf-recursive \
- ps-recursive uninstall-recursive
-RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
- distclean-recursive maintainer-clean-recursive
-ETAGS = etags
-CTAGS = ctags
-DIST_SUBDIRS = $(SUBDIRS)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AMTAR = @AMTAR@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO = @ECHO@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-F77 = @F77@
-FFLAGS = @FFLAGS@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-VERSION = @VERSION@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-SUBDIRS = \
- auditfilter_noop
-
-all: all-recursive
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
- && exit 0; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign modules/Makefile'; \
- cd $(top_srcdir) && \
- $(AUTOMAKE) --foreign modules/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-# (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
-$(RECURSIVE_TARGETS):
- @failcom='exit 1'; \
- for f in x $$MAKEFLAGS; do \
- case $$f in \
- *=* | --[!k]*);; \
- *k*) failcom='fail=yes';; \
- esac; \
- done; \
- dot_seen=no; \
- target=`echo $@ | sed s/-recursive//`; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- dot_seen=yes; \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || eval $$failcom; \
- done; \
- if test "$$dot_seen" = "no"; then \
- $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
- fi; test -z "$$fail"
-
-$(RECURSIVE_CLEAN_TARGETS):
- @failcom='exit 1'; \
- for f in x $$MAKEFLAGS; do \
- case $$f in \
- *=* | --[!k]*);; \
- *k*) failcom='fail=yes';; \
- esac; \
- done; \
- dot_seen=no; \
- case "$@" in \
- distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
- *) list='$(SUBDIRS)' ;; \
- esac; \
- rev=''; for subdir in $$list; do \
- if test "$$subdir" = "."; then :; else \
- rev="$$subdir $$rev"; \
- fi; \
- done; \
- rev="$$rev ."; \
- target=`echo $@ | sed s/-recursive//`; \
- for subdir in $$rev; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || eval $$failcom; \
- done && test -z "$$fail"
-tags-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
- done
-ctags-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
- done
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- mkid -fID $$unique
-tags: TAGS
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
- include_option=--etags-include; \
- empty_fix=.; \
- else \
- include_option=--include; \
- empty_fix=; \
- fi; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- test ! -f $$subdir/TAGS || \
- tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
- fi; \
- done; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
- test -n "$$unique" || unique=$$empty_fix; \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$tags $$unique; \
- fi
-ctags: CTAGS
-CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(CTAGS_ARGS)$$tags$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$tags $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && cd $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) $$here
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
- fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
- else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
- || exit 1; \
- fi; \
- done
- list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- test -d "$(distdir)/$$subdir" \
- || $(MKDIR_P) "$(distdir)/$$subdir" \
- || exit 1; \
- distdir=`$(am__cd) $(distdir) && pwd`; \
- top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
- (cd $$subdir && \
- $(MAKE) $(AM_MAKEFLAGS) \
- top_distdir="$$top_distdir" \
- distdir="$$distdir/$$subdir" \
- am__remove_distdir=: \
- am__skip_length_check=: \
- distdir) \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-recursive
-all-am: Makefile
-installdirs: installdirs-recursive
-installdirs-am:
-install: install-recursive
-install-exec: install-exec-recursive
-install-data: install-data-recursive
-uninstall: uninstall-recursive
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-recursive
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-recursive
-
-clean-am: clean-generic clean-libtool mostlyclean-am
-
-distclean: distclean-recursive
- -rm -f Makefile
-distclean-am: clean-am distclean-generic distclean-tags
-
-dvi: dvi-recursive
-
-dvi-am:
-
-html: html-recursive
-
-info: info-recursive
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-recursive
-
-install-exec-am:
-
-install-html: install-html-recursive
-
-install-info: install-info-recursive
-
-install-man:
-
-install-pdf: install-pdf-recursive
-
-install-ps: install-ps-recursive
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-recursive
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-recursive
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-recursive
-
-pdf-am:
-
-ps: ps-recursive
-
-ps-am:
-
-uninstall-am:
-
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
- install-strip
-
-.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
- all all-am check check-am clean clean-generic clean-libtool \
- ctags ctags-recursive distclean distclean-generic \
- distclean-libtool distclean-tags distdir dvi dvi-am html \
- html-am info info-am install install-am install-data \
- install-data-am install-dvi install-dvi-am install-exec \
- install-exec-am install-html install-html-am install-info \
- install-info-am install-man install-pdf install-pdf-am \
- install-ps install-ps-am install-strip installcheck \
- installcheck-am installdirs installdirs-am maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic \
- mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
- uninstall uninstall-am
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
Copied: vendor/openbsm/1.2_alpha4/modules/Makefile.in (from rev 11163, vendor/openbsm/dist/modules/Makefile.in)
===================================================================
--- vendor/openbsm/1.2_alpha4/modules/Makefile.in (rev 0)
+++ vendor/openbsm/1.2_alpha4/modules/Makefile.in 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,576 @@
+# Makefile.in generated by automake 1.12.2 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2012 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+ at SET_MAKE@
+VPATH = @srcdir@
+am__make_dryrun = \
+ { \
+ am__dry=no; \
+ case $$MAKEFLAGS in \
+ *\\[\ \ ]*) \
+ echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
+ | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+ *) \
+ for am__flg in $$MAKEFLAGS; do \
+ case $$am__flg in \
+ *=*|--*) ;; \
+ *n*) am__dry=yes; break;; \
+ esac; \
+ done;; \
+ esac; \
+ test $$am__dry = yes; \
+ }
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+subdir = modules
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+ html-recursive info-recursive install-data-recursive \
+ install-dvi-recursive install-exec-recursive \
+ install-html-recursive install-info-recursive \
+ install-pdf-recursive install-ps-recursive install-recursive \
+ installcheck-recursive installdirs-recursive pdf-recursive \
+ ps-recursive uninstall-recursive
+am__can_run_installinfo = \
+ case $$AM_UPDATE_INFO_DIR in \
+ n|no|NO) false;; \
+ *) (install-info --version) >/dev/null 2>&1;; \
+ esac
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
+ distclean-recursive maintainer-clean-recursive
+AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
+ $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
+ distdir
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+am__relativize = \
+ dir0=`pwd`; \
+ sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+ sed_rest='s,^[^/]*/*,,'; \
+ sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+ sed_butlast='s,/*[^/]*$$,,'; \
+ while test -n "$$dir1"; do \
+ first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+ if test "$$first" != "."; then \
+ if test "$$first" = ".."; then \
+ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+ else \
+ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+ if test "$$first2" = "$$first"; then \
+ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+ else \
+ dir2="../$$dir2"; \
+ fi; \
+ dir0="$$dir0"/"$$first"; \
+ fi; \
+ fi; \
+ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+ done; \
+ reldir="$$dir2"
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LEX = @LEX@
+LEXLIB = @LEXLIB@
+LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MIG = @MIG@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+VERSION = @VERSION@
+YACC = @YACC@
+YFLAGS = @YFLAGS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+SUBDIRS = \
+ auditfilter_noop
+
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+ && { if test -f $@; then exit 0; else break; fi; }; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign modules/Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --foreign modules/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+
+mostlyclean-libtool:
+ -rm -f *.lo
+
+clean-libtool:
+ -rm -rf .libs _libs
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run 'make' without going through this Makefile.
+# To change the values of 'make' variables: instead of editing Makefiles,
+# (1) if the variable is set in 'config.status', edit 'config.status'
+# (which will cause the Makefiles to be regenerated when you run 'make');
+# (2) otherwise, pass the desired values on the 'make' command line.
+$(RECURSIVE_TARGETS) $(RECURSIVE_CLEAN_TARGETS):
+ @fail= failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+ done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+ done
+cscopelist-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) cscopelist); \
+ done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ set x; \
+ here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ shift; \
+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ if test $$# -gt 0; then \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ "$$@" $$unique; \
+ else \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$unique; \
+ fi; \
+ fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ test -z "$(CTAGS_ARGS)$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && $(am__cd) $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) "$$here"
+
+cscopelist: cscopelist-recursive $(HEADERS) $(SOURCES) $(LISP)
+ list='$(SOURCES) $(HEADERS) $(LISP)'; \
+ case "$(srcdir)" in \
+ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+ *) sdir=$(subdir)/$(srcdir) ;; \
+ esac; \
+ for i in $$list; do \
+ if test -f "$$i"; then \
+ echo "$(subdir)/$$i"; \
+ else \
+ echo "$$sdir/$$i"; \
+ fi; \
+ done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+ else \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
+ || exit 1; \
+ fi; \
+ done
+ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ $(am__make_dryrun) \
+ || test -d "$(distdir)/$$subdir" \
+ || $(MKDIR_P) "$(distdir)/$$subdir" \
+ || exit 1; \
+ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+ $(am__relativize); \
+ new_distdir=$$reldir; \
+ dir1=$$subdir; dir2="$(top_distdir)"; \
+ $(am__relativize); \
+ new_top_distdir=$$reldir; \
+ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+ ($(am__cd) $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$new_top_distdir" \
+ distdir="$$new_distdir" \
+ am__remove_distdir=: \
+ am__skip_length_check=: \
+ am__skip_mode_fix=: \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ if test -z '$(STRIP)'; then \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ install; \
+ else \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+ fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+html-am:
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-recursive
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-recursive
+
+install-html-am:
+
+install-info: install-info-recursive
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-recursive
+
+install-pdf-am:
+
+install-ps: install-ps-recursive
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am:
+
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) \
+ cscopelist-recursive ctags-recursive install-am install-strip \
+ tags-recursive
+
+.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
+ all all-am check check-am clean clean-generic clean-libtool \
+ cscopelist cscopelist-recursive ctags ctags-recursive \
+ distclean distclean-generic distclean-libtool distclean-tags \
+ distdir dvi dvi-am html html-am info info-am install \
+ install-am install-data install-data-am install-dvi \
+ install-dvi-am install-exec install-exec-am install-html \
+ install-html-am install-info install-info-am install-man \
+ install-pdf install-pdf-am install-ps install-ps-am \
+ install-strip installcheck installcheck-am installdirs \
+ installdirs-am maintainer-clean maintainer-clean-generic \
+ mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
+ ps ps-am tags tags-recursive uninstall uninstall-am
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
Deleted: vendor/openbsm/1.2_alpha4/modules/auditfilter_noop/Makefile.am
===================================================================
--- vendor/openbsm/dist/modules/auditfilter_noop/Makefile.am 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/modules/auditfilter_noop/Makefile.am 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,10 +0,0 @@
-#
-# $P4: //depot/projects/trustedbsd/openbsm/modules/auditfilter_noop/Makefile.am#1 $
-#
-
-INCLUDES = -I$(top_srcdir)
-
-lib_LTLIBRARIES = auditfilter_noop.la
-
-auditfilter_noop_la_SOURCE = auditfilter_noop.c
-auditfilter_noop_la_LDFLAGS = -module
Copied: vendor/openbsm/1.2_alpha4/modules/auditfilter_noop/Makefile.am (from rev 11163, vendor/openbsm/dist/modules/auditfilter_noop/Makefile.am)
===================================================================
--- vendor/openbsm/1.2_alpha4/modules/auditfilter_noop/Makefile.am (rev 0)
+++ vendor/openbsm/1.2_alpha4/modules/auditfilter_noop/Makefile.am 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,10 @@
+if USE_NATIVE_INCLUDES
+INCLUDES = -I$(top_builddir) -I$(top_srcdir)
+else
+INCLUDES = -I$(top_builddir) -I$(top_srcdir) -I$(top_srcdir)/sys
+endif
+
+lib_LTLIBRARIES = auditfilter_noop.la
+
+auditfilter_noop_la_SOURCE = auditfilter_noop.c
+auditfilter_noop_la_LDFLAGS = -module
Deleted: vendor/openbsm/1.2_alpha4/modules/auditfilter_noop/Makefile.in
===================================================================
--- vendor/openbsm/dist/modules/auditfilter_noop/Makefile.in 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/modules/auditfilter_noop/Makefile.in 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,471 +0,0 @@
-# Makefile.in generated by automake 1.10 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
- at SET_MAKE@
-
-#
-# $P4: //depot/projects/trustedbsd/openbsm/modules/auditfilter_noop/Makefile.in#2 $
-#
-
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = modules/auditfilter_noop
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/config/config.h
-CONFIG_CLEAN_FILES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
-am__installdirs = "$(DESTDIR)$(libdir)"
-libLTLIBRARIES_INSTALL = $(INSTALL)
-LTLIBRARIES = $(lib_LTLIBRARIES)
-auditfilter_noop_la_LIBADD =
-auditfilter_noop_la_SOURCES = auditfilter_noop.c
-auditfilter_noop_la_OBJECTS = auditfilter_noop.lo
-auditfilter_noop_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
- $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
- $(auditfilter_noop_la_LDFLAGS) $(LDFLAGS) -o $@
-DEFAULT_INCLUDES = -I. -I$(top_builddir)/config at am__isrc@
-depcomp = $(SHELL) $(top_srcdir)/config/depcomp
-am__depfiles_maybe = depfiles
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
- $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
- --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
- $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
- --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
- $(LDFLAGS) -o $@
-SOURCES = auditfilter_noop.c
-DIST_SOURCES = auditfilter_noop.c
-ETAGS = etags
-CTAGS = ctags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AMTAR = @AMTAR@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO = @ECHO@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-F77 = @F77@
-FFLAGS = @FFLAGS@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-VERSION = @VERSION@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-INCLUDES = -I$(top_srcdir)
-lib_LTLIBRARIES = auditfilter_noop.la
-auditfilter_noop_la_SOURCE = auditfilter_noop.c
-auditfilter_noop_la_LDFLAGS = -module
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .c .lo .o .obj
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
- && exit 0; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign modules/auditfilter_noop/Makefile'; \
- cd $(top_srcdir) && \
- $(AUTOMAKE) --foreign modules/auditfilter_noop/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-install-libLTLIBRARIES: $(lib_LTLIBRARIES)
- @$(NORMAL_INSTALL)
- test -z "$(libdir)" || $(MKDIR_P) "$(DESTDIR)$(libdir)"
- @list='$(lib_LTLIBRARIES)'; for p in $$list; do \
- if test -f $$p; then \
- f=$(am__strip_dir) \
- echo " $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(libdir)/$$f'"; \
- $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(libdir)/$$f"; \
- else :; fi; \
- done
-
-uninstall-libLTLIBRARIES:
- @$(NORMAL_UNINSTALL)
- @list='$(lib_LTLIBRARIES)'; for p in $$list; do \
- p=$(am__strip_dir) \
- echo " $(LIBTOOL) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$p'"; \
- $(LIBTOOL) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$p"; \
- done
-
-clean-libLTLIBRARIES:
- -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
- @list='$(lib_LTLIBRARIES)'; for p in $$list; do \
- dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
- test "$$dir" != "$$p" || dir=.; \
- echo "rm -f \"$${dir}/so_locations\""; \
- rm -f "$${dir}/so_locations"; \
- done
-auditfilter_noop.la: $(auditfilter_noop_la_OBJECTS) $(auditfilter_noop_la_DEPENDENCIES)
- $(auditfilter_noop_la_LINK) -rpath $(libdir) $(auditfilter_noop_la_OBJECTS) $(auditfilter_noop_la_LIBADD) $(LIBS)
-
-mostlyclean-compile:
- -rm -f *.$(OBJEXT)
-
-distclean-compile:
- -rm -f *.tab.c
-
- at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/auditfilter_noop.Plo at am__quote@
-
-.c.o:
- at am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
- at am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
- at AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
- at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
- at am__fastdepCC_FALSE@ $(COMPILE) -c $<
-
-.c.obj:
- at am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
- at am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
- at AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
- at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
- at am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
-
-.c.lo:
- at am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
- at am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
- at AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
- at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
- at am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $<
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- mkid -fID $$unique
-tags: TAGS
-
-TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
- test -n "$$unique" || unique=$$empty_fix; \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$tags $$unique; \
- fi
-ctags: CTAGS
-CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(CTAGS_ARGS)$$tags$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$tags $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && cd $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) $$here
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
- fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
- else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(LTLIBRARIES)
-installdirs:
- for dir in "$(DESTDIR)$(libdir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic clean-libLTLIBRARIES clean-libtool \
- mostlyclean-am
-
-distclean: distclean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
- distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-info: info-am
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-am
-
-install-exec-am: install-libLTLIBRARIES
-
-install-html: install-html-am
-
-install-info: install-info-am
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-ps: install-ps-am
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic \
- mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-libLTLIBRARIES
-
-.MAKE: install-am install-strip
-
-.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
- clean-libLTLIBRARIES clean-libtool ctags distclean \
- distclean-compile distclean-generic distclean-libtool \
- distclean-tags distdir dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am \
- install-libLTLIBRARIES install-man install-pdf install-pdf-am \
- install-ps install-ps-am install-strip installcheck \
- installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-compile \
- mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
- tags uninstall uninstall-am uninstall-libLTLIBRARIES
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
Copied: vendor/openbsm/1.2_alpha4/modules/auditfilter_noop/Makefile.in (from rev 11163, vendor/openbsm/dist/modules/auditfilter_noop/Makefile.in)
===================================================================
--- vendor/openbsm/1.2_alpha4/modules/auditfilter_noop/Makefile.in (rev 0)
+++ vendor/openbsm/1.2_alpha4/modules/auditfilter_noop/Makefile.in 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,576 @@
+# Makefile.in generated by automake 1.12.2 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2012 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+ at SET_MAKE@
+
+VPATH = @srcdir@
+am__make_dryrun = \
+ { \
+ am__dry=no; \
+ case $$MAKEFLAGS in \
+ *\\[\ \ ]*) \
+ echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
+ | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+ *) \
+ for am__flg in $$MAKEFLAGS; do \
+ case $$am__flg in \
+ *=*|--*) ;; \
+ *n*) am__dry=yes; break;; \
+ esac; \
+ done;; \
+ esac; \
+ test $$am__dry = yes; \
+ }
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+subdir = modules/auditfilter_noop
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
+ $(top_srcdir)/config/depcomp
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+ *) f=$$p;; \
+ esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+ if (++n[$$2] == $(am__install_max)) \
+ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+ END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+ test -z "$$files" \
+ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+ $(am__cd) "$$dir" && rm -f $$files; }; \
+ }
+am__installdirs = "$(DESTDIR)$(libdir)"
+LTLIBRARIES = $(lib_LTLIBRARIES)
+auditfilter_noop_la_LIBADD =
+auditfilter_noop_la_SOURCES = auditfilter_noop.c
+auditfilter_noop_la_OBJECTS = auditfilter_noop.lo
+auditfilter_noop_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
+ $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+ $(auditfilter_noop_la_LDFLAGS) $(LDFLAGS) -o $@
+DEFAULT_INCLUDES = -I. at am__isrc@ -I$(top_builddir)/config
+depcomp = $(SHELL) $(top_srcdir)/config/depcomp
+am__depfiles_maybe = depfiles
+am__mv = mv -f
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+ --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+ --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
+ $(LDFLAGS) -o $@
+SOURCES = auditfilter_noop.c
+DIST_SOURCES = auditfilter_noop.c
+am__can_run_installinfo = \
+ case $$AM_UPDATE_INFO_DIR in \
+ n|no|NO) false;; \
+ *) (install-info --version) >/dev/null 2>&1;; \
+ esac
+ETAGS = etags
+CTAGS = ctags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LEX = @LEX@
+LEXLIB = @LEXLIB@
+LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MIG = @MIG@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+VERSION = @VERSION@
+YACC = @YACC@
+YFLAGS = @YFLAGS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+ at USE_NATIVE_INCLUDES_FALSE@INCLUDES = -I$(top_builddir) -I$(top_srcdir) -I$(top_srcdir)/sys
+ at USE_NATIVE_INCLUDES_TRUE@INCLUDES = -I$(top_builddir) -I$(top_srcdir)
+lib_LTLIBRARIES = auditfilter_noop.la
+auditfilter_noop_la_SOURCE = auditfilter_noop.c
+auditfilter_noop_la_LDFLAGS = -module
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .lo .o .obj
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+ && { if test -f $@; then exit 0; else break; fi; }; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign modules/auditfilter_noop/Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --foreign modules/auditfilter_noop/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+install-libLTLIBRARIES: $(lib_LTLIBRARIES)
+ @$(NORMAL_INSTALL)
+ @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
+ list2=; for p in $$list; do \
+ if test -f $$p; then \
+ list2="$$list2 $$p"; \
+ else :; fi; \
+ done; \
+ test -z "$$list2" || { \
+ echo " $(MKDIR_P) '$(DESTDIR)$(libdir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(libdir)" || exit 1; \
+ echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \
+ $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \
+ }
+
+uninstall-libLTLIBRARIES:
+ @$(NORMAL_UNINSTALL)
+ @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
+ for p in $$list; do \
+ $(am__strip_dir) \
+ echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \
+ $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \
+ done
+
+clean-libLTLIBRARIES:
+ -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
+ @list='$(lib_LTLIBRARIES)'; \
+ locs=`for p in $$list; do echo $$p; done | \
+ sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \
+ sort -u`; \
+ test -z "$$locs" || { \
+ echo rm -f $${locs}; \
+ rm -f $${locs}; \
+ }
+auditfilter_noop.la: $(auditfilter_noop_la_OBJECTS) $(auditfilter_noop_la_DEPENDENCIES) $(EXTRA_auditfilter_noop_la_DEPENDENCIES)
+ $(auditfilter_noop_la_LINK) -rpath $(libdir) $(auditfilter_noop_la_OBJECTS) $(auditfilter_noop_la_LIBADD) $(LIBS)
+
+mostlyclean-compile:
+ -rm -f *.$(OBJEXT)
+
+distclean-compile:
+ -rm -f *.tab.c
+
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/auditfilter_noop.Plo at am__quote@
+
+.c.o:
+ at am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+ at am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ at am__fastdepCC_FALSE@ $(COMPILE) -c $<
+
+.c.obj:
+ at am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+ at am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ at am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
+
+.c.lo:
+ at am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+ at am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ at am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $<
+
+mostlyclean-libtool:
+ -rm -f *.lo
+
+clean-libtool:
+ -rm -rf .libs _libs
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ set x; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ shift; \
+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ if test $$# -gt 0; then \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ "$$@" $$unique; \
+ else \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$unique; \
+ fi; \
+ fi
+ctags: CTAGS
+CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ test -z "$(CTAGS_ARGS)$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && $(am__cd) $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) "$$here"
+
+cscopelist: $(HEADERS) $(SOURCES) $(LISP)
+ list='$(SOURCES) $(HEADERS) $(LISP)'; \
+ case "$(srcdir)" in \
+ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+ *) sdir=$(subdir)/$(srcdir) ;; \
+ esac; \
+ for i in $$list; do \
+ if test -f "$$i"; then \
+ echo "$(subdir)/$$i"; \
+ else \
+ echo "$$sdir/$$i"; \
+ fi; \
+ done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+ else \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+check: check-am
+all-am: Makefile $(LTLIBRARIES)
+installdirs:
+ for dir in "$(DESTDIR)$(libdir)"; do \
+ test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+ done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+ if test -z '$(STRIP)'; then \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ install; \
+ else \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+ fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libLTLIBRARIES clean-libtool \
+ mostlyclean-am
+
+distclean: distclean-am
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+ distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am: install-libLTLIBRARIES
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+ mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-libLTLIBRARIES
+
+.MAKE: install-am install-strip
+
+.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
+ clean-libLTLIBRARIES clean-libtool cscopelist ctags distclean \
+ distclean-compile distclean-generic distclean-libtool \
+ distclean-tags distdir dvi dvi-am html html-am info info-am \
+ install install-am install-data install-data-am install-dvi \
+ install-dvi-am install-exec install-exec-am install-html \
+ install-html-am install-info install-info-am \
+ install-libLTLIBRARIES install-man install-pdf install-pdf-am \
+ install-ps install-ps-am install-strip installcheck \
+ installcheck-am installdirs maintainer-clean \
+ maintainer-clean-generic mostlyclean mostlyclean-compile \
+ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+ tags uninstall uninstall-am uninstall-libLTLIBRARIES
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
Deleted: vendor/openbsm/1.2_alpha4/modules/auditfilter_noop/auditfilter_noop.c
===================================================================
--- vendor/openbsm/dist/modules/auditfilter_noop/auditfilter_noop.c 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/modules/auditfilter_noop/auditfilter_noop.c 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,73 +0,0 @@
-/*-
- * Copyright (c) 2006 Robert N. M. Watson
- * All rights reserved.
- *
- * This software was developed by Robert Watson for the TrustedBSD Project.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * $P4: //depot/projects/trustedbsd/openbsm/modules/auditfilter_noop/auditfilter_noop.c#4 $
- */
-
-/*
- * Sample audit filter: no-op which sinks audit records in both BSM and
- * parsed formats, but does nothing with them.
- */
-
-#include <bsm/libbsm.h>
-
-#include <bsm/libbsm.h>
-#include <bsm/audit_filter.h>
-
-int
-AUDIT_FILTER_ATTACH(void *instance, int argc, char *argv[])
-{
-
- return (0);
-}
-
-int
-AUDIT_FILTER_REINIT(void *instance, int argc, char *argv[])
-{
-
- return (0);
-}
-
-void
-AUDIT_FILTER_RECORD(void *instance, struct timespec *ts, int token_count,
- const tokenstr_t *tok[])
-{
-
-}
-
-void
-AUDIT_FILTER_RAWRECORD(void *instance, struct timespec *ts, u_char *data,
- u_int len)
-{
-
-}
-
-void
-AUDIT_FILTER_DETACH(void *instance)
-{
-
-}
Copied: vendor/openbsm/1.2_alpha4/modules/auditfilter_noop/auditfilter_noop.c (from rev 11163, vendor/openbsm/dist/modules/auditfilter_noop/auditfilter_noop.c)
===================================================================
--- vendor/openbsm/1.2_alpha4/modules/auditfilter_noop/auditfilter_noop.c (rev 0)
+++ vendor/openbsm/1.2_alpha4/modules/auditfilter_noop/auditfilter_noop.c 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,77 @@
+/*-
+ * Copyright (c) 2006 Robert N. M. Watson
+ * All rights reserved.
+ *
+ * This software was developed by Robert Watson for the TrustedBSD Project.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+/*
+ * Sample audit filter: no-op which sinks audit records in both BSM and
+ * parsed formats, but does nothing with them.
+ */
+
+#include <bsm/libbsm.h>
+
+#include <bsm/libbsm.h>
+#include <bsm/audit_filter.h>
+
+#ifndef __unused
+#define __unused
+#endif
+
+int
+AUDIT_FILTER_ATTACH(void *instance __unused, int argc __unused,
+ char *argv[] __unused)
+{
+
+ return (0);
+}
+
+int
+AUDIT_FILTER_REINIT(void *instance __unused, int argc __unused,
+ char *argv[] __unused)
+{
+
+ return (0);
+}
+
+void
+AUDIT_FILTER_RECORD(void *instance __unused, struct timespec *ts __unused,
+ int token_count __unused, const tokenstr_t *tok[] __unused)
+{
+
+}
+
+void
+AUDIT_FILTER_RAWRECORD(void *instance __unused, struct timespec *ts __unused,
+ u_char *data __unused, u_int len __unused)
+{
+
+}
+
+void
+AUDIT_FILTER_DETACH(void *instance __unused)
+{
+
+}
Deleted: vendor/openbsm/1.2_alpha4/test/Makefile.am
===================================================================
--- vendor/openbsm/dist/test/Makefile.am 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/test/Makefile.am 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,6 +0,0 @@
-#
-# $P4: //depot/projects/trustedbsd/openbsm/test/Makefile.am#1 $
-#
-
-SUBDIRS = \
- bsm
Copied: vendor/openbsm/1.2_alpha4/test/Makefile.am (from rev 11163, vendor/openbsm/dist/test/Makefile.am)
===================================================================
--- vendor/openbsm/1.2_alpha4/test/Makefile.am (rev 0)
+++ vendor/openbsm/1.2_alpha4/test/Makefile.am 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,2 @@
+SUBDIRS = \
+ bsm
Deleted: vendor/openbsm/1.2_alpha4/test/Makefile.in
===================================================================
--- vendor/openbsm/dist/test/Makefile.in 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/test/Makefile.in 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,487 +0,0 @@
-# Makefile.in generated by automake 1.10 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
- at SET_MAKE@
-
-#
-# $P4: //depot/projects/trustedbsd/openbsm/test/Makefile.in#2 $
-#
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = test
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/config/config.h
-CONFIG_CLEAN_FILES =
-SOURCES =
-DIST_SOURCES =
-RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
- html-recursive info-recursive install-data-recursive \
- install-dvi-recursive install-exec-recursive \
- install-html-recursive install-info-recursive \
- install-pdf-recursive install-ps-recursive install-recursive \
- installcheck-recursive installdirs-recursive pdf-recursive \
- ps-recursive uninstall-recursive
-RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
- distclean-recursive maintainer-clean-recursive
-ETAGS = etags
-CTAGS = ctags
-DIST_SUBDIRS = $(SUBDIRS)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AMTAR = @AMTAR@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO = @ECHO@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-F77 = @F77@
-FFLAGS = @FFLAGS@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-VERSION = @VERSION@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-SUBDIRS = \
- bsm
-
-all: all-recursive
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
- && exit 0; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign test/Makefile'; \
- cd $(top_srcdir) && \
- $(AUTOMAKE) --foreign test/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-# (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
-$(RECURSIVE_TARGETS):
- @failcom='exit 1'; \
- for f in x $$MAKEFLAGS; do \
- case $$f in \
- *=* | --[!k]*);; \
- *k*) failcom='fail=yes';; \
- esac; \
- done; \
- dot_seen=no; \
- target=`echo $@ | sed s/-recursive//`; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- dot_seen=yes; \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || eval $$failcom; \
- done; \
- if test "$$dot_seen" = "no"; then \
- $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
- fi; test -z "$$fail"
-
-$(RECURSIVE_CLEAN_TARGETS):
- @failcom='exit 1'; \
- for f in x $$MAKEFLAGS; do \
- case $$f in \
- *=* | --[!k]*);; \
- *k*) failcom='fail=yes';; \
- esac; \
- done; \
- dot_seen=no; \
- case "$@" in \
- distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
- *) list='$(SUBDIRS)' ;; \
- esac; \
- rev=''; for subdir in $$list; do \
- if test "$$subdir" = "."; then :; else \
- rev="$$subdir $$rev"; \
- fi; \
- done; \
- rev="$$rev ."; \
- target=`echo $@ | sed s/-recursive//`; \
- for subdir in $$rev; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || eval $$failcom; \
- done && test -z "$$fail"
-tags-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
- done
-ctags-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
- done
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- mkid -fID $$unique
-tags: TAGS
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
- include_option=--etags-include; \
- empty_fix=.; \
- else \
- include_option=--include; \
- empty_fix=; \
- fi; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- test ! -f $$subdir/TAGS || \
- tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
- fi; \
- done; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
- test -n "$$unique" || unique=$$empty_fix; \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$tags $$unique; \
- fi
-ctags: CTAGS
-CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(CTAGS_ARGS)$$tags$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$tags $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && cd $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) $$here
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
- fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
- else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
- || exit 1; \
- fi; \
- done
- list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- test -d "$(distdir)/$$subdir" \
- || $(MKDIR_P) "$(distdir)/$$subdir" \
- || exit 1; \
- distdir=`$(am__cd) $(distdir) && pwd`; \
- top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
- (cd $$subdir && \
- $(MAKE) $(AM_MAKEFLAGS) \
- top_distdir="$$top_distdir" \
- distdir="$$distdir/$$subdir" \
- am__remove_distdir=: \
- am__skip_length_check=: \
- distdir) \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-recursive
-all-am: Makefile
-installdirs: installdirs-recursive
-installdirs-am:
-install: install-recursive
-install-exec: install-exec-recursive
-install-data: install-data-recursive
-uninstall: uninstall-recursive
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-recursive
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-recursive
-
-clean-am: clean-generic clean-libtool mostlyclean-am
-
-distclean: distclean-recursive
- -rm -f Makefile
-distclean-am: clean-am distclean-generic distclean-tags
-
-dvi: dvi-recursive
-
-dvi-am:
-
-html: html-recursive
-
-info: info-recursive
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-recursive
-
-install-exec-am:
-
-install-html: install-html-recursive
-
-install-info: install-info-recursive
-
-install-man:
-
-install-pdf: install-pdf-recursive
-
-install-ps: install-ps-recursive
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-recursive
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-recursive
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-recursive
-
-pdf-am:
-
-ps: ps-recursive
-
-ps-am:
-
-uninstall-am:
-
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
- install-strip
-
-.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
- all all-am check check-am clean clean-generic clean-libtool \
- ctags ctags-recursive distclean distclean-generic \
- distclean-libtool distclean-tags distdir dvi dvi-am html \
- html-am info info-am install install-am install-data \
- install-data-am install-dvi install-dvi-am install-exec \
- install-exec-am install-html install-html-am install-info \
- install-info-am install-man install-pdf install-pdf-am \
- install-ps install-ps-am install-strip installcheck \
- installcheck-am installdirs installdirs-am maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic \
- mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
- uninstall uninstall-am
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
Copied: vendor/openbsm/1.2_alpha4/test/Makefile.in (from rev 11163, vendor/openbsm/dist/test/Makefile.in)
===================================================================
--- vendor/openbsm/1.2_alpha4/test/Makefile.in (rev 0)
+++ vendor/openbsm/1.2_alpha4/test/Makefile.in 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,576 @@
+# Makefile.in generated by automake 1.12.2 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2012 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+ at SET_MAKE@
+VPATH = @srcdir@
+am__make_dryrun = \
+ { \
+ am__dry=no; \
+ case $$MAKEFLAGS in \
+ *\\[\ \ ]*) \
+ echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
+ | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+ *) \
+ for am__flg in $$MAKEFLAGS; do \
+ case $$am__flg in \
+ *=*|--*) ;; \
+ *n*) am__dry=yes; break;; \
+ esac; \
+ done;; \
+ esac; \
+ test $$am__dry = yes; \
+ }
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+subdir = test
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+ html-recursive info-recursive install-data-recursive \
+ install-dvi-recursive install-exec-recursive \
+ install-html-recursive install-info-recursive \
+ install-pdf-recursive install-ps-recursive install-recursive \
+ installcheck-recursive installdirs-recursive pdf-recursive \
+ ps-recursive uninstall-recursive
+am__can_run_installinfo = \
+ case $$AM_UPDATE_INFO_DIR in \
+ n|no|NO) false;; \
+ *) (install-info --version) >/dev/null 2>&1;; \
+ esac
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
+ distclean-recursive maintainer-clean-recursive
+AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
+ $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
+ distdir
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+am__relativize = \
+ dir0=`pwd`; \
+ sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+ sed_rest='s,^[^/]*/*,,'; \
+ sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+ sed_butlast='s,/*[^/]*$$,,'; \
+ while test -n "$$dir1"; do \
+ first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+ if test "$$first" != "."; then \
+ if test "$$first" = ".."; then \
+ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+ else \
+ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+ if test "$$first2" = "$$first"; then \
+ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+ else \
+ dir2="../$$dir2"; \
+ fi; \
+ dir0="$$dir0"/"$$first"; \
+ fi; \
+ fi; \
+ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+ done; \
+ reldir="$$dir2"
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LEX = @LEX@
+LEXLIB = @LEXLIB@
+LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MIG = @MIG@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+VERSION = @VERSION@
+YACC = @YACC@
+YFLAGS = @YFLAGS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+SUBDIRS = \
+ bsm
+
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+ && { if test -f $@; then exit 0; else break; fi; }; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign test/Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --foreign test/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+
+mostlyclean-libtool:
+ -rm -f *.lo
+
+clean-libtool:
+ -rm -rf .libs _libs
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run 'make' without going through this Makefile.
+# To change the values of 'make' variables: instead of editing Makefiles,
+# (1) if the variable is set in 'config.status', edit 'config.status'
+# (which will cause the Makefiles to be regenerated when you run 'make');
+# (2) otherwise, pass the desired values on the 'make' command line.
+$(RECURSIVE_TARGETS) $(RECURSIVE_CLEAN_TARGETS):
+ @fail= failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+ done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+ done
+cscopelist-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) cscopelist); \
+ done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ set x; \
+ here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ shift; \
+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ if test $$# -gt 0; then \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ "$$@" $$unique; \
+ else \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$unique; \
+ fi; \
+ fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ test -z "$(CTAGS_ARGS)$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && $(am__cd) $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) "$$here"
+
+cscopelist: cscopelist-recursive $(HEADERS) $(SOURCES) $(LISP)
+ list='$(SOURCES) $(HEADERS) $(LISP)'; \
+ case "$(srcdir)" in \
+ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+ *) sdir=$(subdir)/$(srcdir) ;; \
+ esac; \
+ for i in $$list; do \
+ if test -f "$$i"; then \
+ echo "$(subdir)/$$i"; \
+ else \
+ echo "$$sdir/$$i"; \
+ fi; \
+ done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+ else \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
+ || exit 1; \
+ fi; \
+ done
+ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ $(am__make_dryrun) \
+ || test -d "$(distdir)/$$subdir" \
+ || $(MKDIR_P) "$(distdir)/$$subdir" \
+ || exit 1; \
+ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+ $(am__relativize); \
+ new_distdir=$$reldir; \
+ dir1=$$subdir; dir2="$(top_distdir)"; \
+ $(am__relativize); \
+ new_top_distdir=$$reldir; \
+ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+ ($(am__cd) $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$new_top_distdir" \
+ distdir="$$new_distdir" \
+ am__remove_distdir=: \
+ am__skip_length_check=: \
+ am__skip_mode_fix=: \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ if test -z '$(STRIP)'; then \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ install; \
+ else \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+ fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+html-am:
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-recursive
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-recursive
+
+install-html-am:
+
+install-info: install-info-recursive
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-recursive
+
+install-pdf-am:
+
+install-ps: install-ps-recursive
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am:
+
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) \
+ cscopelist-recursive ctags-recursive install-am install-strip \
+ tags-recursive
+
+.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
+ all all-am check check-am clean clean-generic clean-libtool \
+ cscopelist cscopelist-recursive ctags ctags-recursive \
+ distclean distclean-generic distclean-libtool distclean-tags \
+ distdir dvi dvi-am html html-am info info-am install \
+ install-am install-data install-data-am install-dvi \
+ install-dvi-am install-exec install-exec-am install-html \
+ install-html-am install-info install-info-am install-man \
+ install-pdf install-pdf-am install-ps install-ps-am \
+ install-strip installcheck installcheck-am installdirs \
+ installdirs-am maintainer-clean maintainer-clean-generic \
+ mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
+ ps ps-am tags tags-recursive uninstall uninstall-am
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
Deleted: vendor/openbsm/1.2_alpha4/test/bsm/Makefile.am
===================================================================
--- vendor/openbsm/dist/test/bsm/Makefile.am 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/test/bsm/Makefile.am 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,9 +0,0 @@
-#
-# $P4: //depot/projects/trustedbsd/openbsm/test/bsm/Makefile.am#1 $
-#
-
-INCLUDES = -I$(top_srcdir)
-
-bin_PROGRAMS = generate
-generate_SOURCES = generate.c
-generate_LDADD = $(top_builddir)/libbsm/libbsm.la
Copied: vendor/openbsm/1.2_alpha4/test/bsm/Makefile.am (from rev 11163, vendor/openbsm/dist/test/bsm/Makefile.am)
===================================================================
--- vendor/openbsm/1.2_alpha4/test/bsm/Makefile.am (rev 0)
+++ vendor/openbsm/1.2_alpha4/test/bsm/Makefile.am 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,9 @@
+if USE_NATIVE_INCLUDES
+INCLUDES = -I$(top_builddir) -I$(top_srcdir)
+else
+INCLUDES = -I$(top_builddir) -I$(top_srcdir) -I$(top_srcdir)/sys
+endif
+
+bin_PROGRAMS = generate
+generate_SOURCES = generate.c
+generate_LDADD = $(top_builddir)/libbsm/libbsm.la
Deleted: vendor/openbsm/1.2_alpha4/test/bsm/Makefile.in
===================================================================
--- vendor/openbsm/dist/test/bsm/Makefile.in 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/test/bsm/Makefile.in 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,463 +0,0 @@
-# Makefile.in generated by automake 1.10 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
- at SET_MAKE@
-
-#
-# $P4: //depot/projects/trustedbsd/openbsm/test/bsm/Makefile.in#2 $
-#
-
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-bin_PROGRAMS = generate$(EXEEXT)
-subdir = test/bsm
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/config/config.h
-CONFIG_CLEAN_FILES =
-am__installdirs = "$(DESTDIR)$(bindir)"
-binPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
-PROGRAMS = $(bin_PROGRAMS)
-am_generate_OBJECTS = generate.$(OBJEXT)
-generate_OBJECTS = $(am_generate_OBJECTS)
-generate_DEPENDENCIES = $(top_builddir)/libbsm/libbsm.la
-DEFAULT_INCLUDES = -I. -I$(top_builddir)/config at am__isrc@
-depcomp = $(SHELL) $(top_srcdir)/config/depcomp
-am__depfiles_maybe = depfiles
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
- $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
- --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
- $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
- --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
- $(LDFLAGS) -o $@
-SOURCES = $(generate_SOURCES)
-DIST_SOURCES = $(generate_SOURCES)
-ETAGS = etags
-CTAGS = ctags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AMTAR = @AMTAR@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO = @ECHO@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-F77 = @F77@
-FFLAGS = @FFLAGS@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-VERSION = @VERSION@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-INCLUDES = -I$(top_srcdir)
-generate_SOURCES = generate.c
-generate_LDADD = $(top_builddir)/libbsm/libbsm.la
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .c .lo .o .obj
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
- && exit 0; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign test/bsm/Makefile'; \
- cd $(top_srcdir) && \
- $(AUTOMAKE) --foreign test/bsm/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-install-binPROGRAMS: $(bin_PROGRAMS)
- @$(NORMAL_INSTALL)
- test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
- @list='$(bin_PROGRAMS)'; for p in $$list; do \
- p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
- if test -f $$p \
- || test -f $$p1 \
- ; then \
- f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
- echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(bindir)/$$f'"; \
- $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(bindir)/$$f" || exit 1; \
- else :; fi; \
- done
-
-uninstall-binPROGRAMS:
- @$(NORMAL_UNINSTALL)
- @list='$(bin_PROGRAMS)'; for p in $$list; do \
- f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
- echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \
- rm -f "$(DESTDIR)$(bindir)/$$f"; \
- done
-
-clean-binPROGRAMS:
- @list='$(bin_PROGRAMS)'; for p in $$list; do \
- f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
- echo " rm -f $$p $$f"; \
- rm -f $$p $$f ; \
- done
-generate$(EXEEXT): $(generate_OBJECTS) $(generate_DEPENDENCIES)
- @rm -f generate$(EXEEXT)
- $(LINK) $(generate_OBJECTS) $(generate_LDADD) $(LIBS)
-
-mostlyclean-compile:
- -rm -f *.$(OBJEXT)
-
-distclean-compile:
- -rm -f *.tab.c
-
- at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/generate.Po at am__quote@
-
-.c.o:
- at am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
- at am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
- at AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
- at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
- at am__fastdepCC_FALSE@ $(COMPILE) -c $<
-
-.c.obj:
- at am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
- at am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
- at AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
- at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
- at am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
-
-.c.lo:
- at am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
- at am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
- at AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
- at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
- at am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $<
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- mkid -fID $$unique
-tags: TAGS
-
-TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
- test -n "$$unique" || unique=$$empty_fix; \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$tags $$unique; \
- fi
-ctags: CTAGS
-CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(CTAGS_ARGS)$$tags$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$tags $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && cd $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) $$here
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
- fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
- else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(PROGRAMS)
-installdirs:
- for dir in "$(DESTDIR)$(bindir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-binPROGRAMS clean-generic clean-libtool mostlyclean-am
-
-distclean: distclean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
- distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-info: info-am
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-am
-
-install-exec-am: install-binPROGRAMS
-
-install-html: install-html-am
-
-install-info: install-info-am
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-ps: install-ps-am
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic \
- mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-binPROGRAMS
-
-.MAKE: install-am install-strip
-
-.PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \
- clean-generic clean-libtool ctags distclean distclean-compile \
- distclean-generic distclean-libtool distclean-tags distdir dvi \
- dvi-am html html-am info info-am install install-am \
- install-binPROGRAMS install-data install-data-am install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-pdf install-pdf-am install-ps install-ps-am \
- install-strip installcheck installcheck-am installdirs \
- maintainer-clean maintainer-clean-generic mostlyclean \
- mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
- pdf pdf-am ps ps-am tags uninstall uninstall-am \
- uninstall-binPROGRAMS
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
Copied: vendor/openbsm/1.2_alpha4/test/bsm/Makefile.in (from rev 11163, vendor/openbsm/dist/test/bsm/Makefile.in)
===================================================================
--- vendor/openbsm/1.2_alpha4/test/bsm/Makefile.in (rev 0)
+++ vendor/openbsm/1.2_alpha4/test/bsm/Makefile.in 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,558 @@
+# Makefile.in generated by automake 1.12.2 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2012 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+ at SET_MAKE@
+
+VPATH = @srcdir@
+am__make_dryrun = \
+ { \
+ am__dry=no; \
+ case $$MAKEFLAGS in \
+ *\\[\ \ ]*) \
+ echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
+ | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+ *) \
+ for am__flg in $$MAKEFLAGS; do \
+ case $$am__flg in \
+ *=*|--*) ;; \
+ *n*) am__dry=yes; break;; \
+ esac; \
+ done;; \
+ esac; \
+ test $$am__dry = yes; \
+ }
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+bin_PROGRAMS = generate$(EXEEXT)
+subdir = test/bsm
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
+ $(top_srcdir)/config/depcomp
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+am__installdirs = "$(DESTDIR)$(bindir)"
+PROGRAMS = $(bin_PROGRAMS)
+am_generate_OBJECTS = generate.$(OBJEXT)
+generate_OBJECTS = $(am_generate_OBJECTS)
+generate_DEPENDENCIES = $(top_builddir)/libbsm/libbsm.la
+DEFAULT_INCLUDES = -I. at am__isrc@ -I$(top_builddir)/config
+depcomp = $(SHELL) $(top_srcdir)/config/depcomp
+am__depfiles_maybe = depfiles
+am__mv = mv -f
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+ --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+ --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
+ $(LDFLAGS) -o $@
+SOURCES = $(generate_SOURCES)
+DIST_SOURCES = $(generate_SOURCES)
+am__can_run_installinfo = \
+ case $$AM_UPDATE_INFO_DIR in \
+ n|no|NO) false;; \
+ *) (install-info --version) >/dev/null 2>&1;; \
+ esac
+ETAGS = etags
+CTAGS = ctags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LEX = @LEX@
+LEXLIB = @LEXLIB@
+LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MIG = @MIG@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+VERSION = @VERSION@
+YACC = @YACC@
+YFLAGS = @YFLAGS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+ at USE_NATIVE_INCLUDES_FALSE@INCLUDES = -I$(top_builddir) -I$(top_srcdir) -I$(top_srcdir)/sys
+ at USE_NATIVE_INCLUDES_TRUE@INCLUDES = -I$(top_builddir) -I$(top_srcdir)
+generate_SOURCES = generate.c
+generate_LDADD = $(top_builddir)/libbsm/libbsm.la
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .lo .o .obj
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+ && { if test -f $@; then exit 0; else break; fi; }; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign test/bsm/Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --foreign test/bsm/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+install-binPROGRAMS: $(bin_PROGRAMS)
+ @$(NORMAL_INSTALL)
+ @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+ if test -n "$$list"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
+ fi; \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed 's/$(EXEEXT)$$//' | \
+ while read p p1; do if test -f $$p || test -f $$p1; \
+ then echo "$$p"; echo "$$p"; else :; fi; \
+ done | \
+ sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
+ -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+ sed 'N;N;N;s,\n, ,g' | \
+ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+ if ($$2 == $$4) files[d] = files[d] " " $$1; \
+ else { print "f", $$3 "/" $$4, $$1; } } \
+ END { for (d in files) print "f", d, files[d] }' | \
+ while read type dir files; do \
+ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+ test -z "$$files" || { \
+ echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+ $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+ } \
+ ; done
+
+uninstall-binPROGRAMS:
+ @$(NORMAL_UNINSTALL)
+ @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+ files=`for p in $$list; do echo "$$p"; done | \
+ sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+ -e 's/$$/$(EXEEXT)/' `; \
+ test -n "$$list" || exit 0; \
+ echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+ cd "$(DESTDIR)$(bindir)" && rm -f $$files
+
+clean-binPROGRAMS:
+ @list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
+ echo " rm -f" $$list; \
+ rm -f $$list || exit $$?; \
+ test -n "$(EXEEXT)" || exit 0; \
+ list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+ echo " rm -f" $$list; \
+ rm -f $$list
+generate$(EXEEXT): $(generate_OBJECTS) $(generate_DEPENDENCIES) $(EXTRA_generate_DEPENDENCIES)
+ @rm -f generate$(EXEEXT)
+ $(LINK) $(generate_OBJECTS) $(generate_LDADD) $(LIBS)
+
+mostlyclean-compile:
+ -rm -f *.$(OBJEXT)
+
+distclean-compile:
+ -rm -f *.tab.c
+
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/generate.Po at am__quote@
+
+.c.o:
+ at am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+ at am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ at am__fastdepCC_FALSE@ $(COMPILE) -c $<
+
+.c.obj:
+ at am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+ at am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ at am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
+
+.c.lo:
+ at am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+ at am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ at am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $<
+
+mostlyclean-libtool:
+ -rm -f *.lo
+
+clean-libtool:
+ -rm -rf .libs _libs
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ set x; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ shift; \
+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ if test $$# -gt 0; then \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ "$$@" $$unique; \
+ else \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$unique; \
+ fi; \
+ fi
+ctags: CTAGS
+CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ test -z "$(CTAGS_ARGS)$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && $(am__cd) $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) "$$here"
+
+cscopelist: $(HEADERS) $(SOURCES) $(LISP)
+ list='$(SOURCES) $(HEADERS) $(LISP)'; \
+ case "$(srcdir)" in \
+ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+ *) sdir=$(subdir)/$(srcdir) ;; \
+ esac; \
+ for i in $$list; do \
+ if test -f "$$i"; then \
+ echo "$(subdir)/$$i"; \
+ else \
+ echo "$$sdir/$$i"; \
+ fi; \
+ done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+ else \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+check: check-am
+all-am: Makefile $(PROGRAMS)
+installdirs:
+ for dir in "$(DESTDIR)$(bindir)"; do \
+ test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+ done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+ if test -z '$(STRIP)'; then \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ install; \
+ else \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+ fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-binPROGRAMS clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-am
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+ distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am: install-binPROGRAMS
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+ mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-binPROGRAMS
+
+.MAKE: install-am install-strip
+
+.PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \
+ clean-generic clean-libtool cscopelist ctags distclean \
+ distclean-compile distclean-generic distclean-libtool \
+ distclean-tags distdir dvi dvi-am html html-am info info-am \
+ install install-am install-binPROGRAMS install-data \
+ install-data-am install-dvi install-dvi-am install-exec \
+ install-exec-am install-html install-html-am install-info \
+ install-info-am install-man install-pdf install-pdf-am \
+ install-ps install-ps-am install-strip installcheck \
+ installcheck-am installdirs maintainer-clean \
+ maintainer-clean-generic mostlyclean mostlyclean-compile \
+ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+ tags uninstall uninstall-am uninstall-binPROGRAMS
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
Deleted: vendor/openbsm/1.2_alpha4/test/bsm/generate.c
===================================================================
--- vendor/openbsm/dist/test/bsm/generate.c 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/test/bsm/generate.c 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,1021 +0,0 @@
-/*-
- * Copyright (c) 2006-2007 Robert N. M. Watson
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * $P4: //depot/projects/trustedbsd/openbsm/test/bsm/generate.c#9 $
- */
-
-/*
- * Generate a series of BSM token samples in the requested directory.
- */
-
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <sys/stat.h>
-
-#include <netinet/in.h>
-#include <netinet/in_systm.h>
-#include <netinet/ip.h>
-
-#include <arpa/inet.h>
-
-#include <bsm/audit_kevents.h>
-#include <bsm/libbsm.h>
-
-#include <err.h>
-#include <errno.h>
-#include <fcntl.h>
-#include <limits.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <sysexits.h>
-#include <unistd.h>
-
-static int do_records, do_tokens;
-
-static void
-usage(void)
-{
-
- fprintf(stderr, "generate [-rt] path\n");
- exit(EX_USAGE);
-}
-
-static int
-open_file(const char *directory, const char *name)
-{
- char pathname[PATH_MAX];
- int fd;
-
- snprintf(pathname, PATH_MAX, "%s/%s", directory, name);
- (void)unlink(pathname);
- fd = open(pathname, O_WRONLY | O_CREAT | O_EXCL, 0600);
- if (fd < 0)
- err(EX_CANTCREAT, "open: %s", name);
- return (fd);
-}
-
-static void
-write_file(int fd, void *buffer, size_t buflen, const char *filename)
-{
- ssize_t len;
-
- len = write(fd, buffer, buflen);
- if (len < 0)
- err(EX_OSERR, "write_file: %s", filename);
- if (len < buflen)
- err(EX_OSERR, "write_file: short write: %s", filename);
-}
-
-/*
- * Write a single token to a file.
- */
-static void
-write_token(const char *directory, const char *filename, token_t *tok)
-{
- u_char buffer[MAX_AUDIT_RECORD_SIZE];
- size_t buflen;
- int fd;
-
- buflen = MAX_AUDIT_RECORD_SIZE;
- if (au_close_token(tok, buffer, &buflen) < 0)
- err(EX_UNAVAILABLE, "au_close_token");
- fd = open_file(directory, filename);
- write_file(fd, buffer, buflen, filename);
- close(fd);
-}
-
-/*
- * Write a token to a file, wrapped in audit record header and trailer.
- */
-static void
-write_record(const char *directory, const char *filename, token_t *tok,
- short event)
-{
- u_char buffer[MAX_AUDIT_RECORD_SIZE];
- size_t buflen;
- int au, fd;
-
- au = au_open();
- if (au < 0)
- err(EX_UNAVAILABLE, "au_open");
- if (au_write(au, tok) < 0)
- err(EX_UNAVAILABLE, "au_write");
- buflen = MAX_AUDIT_RECORD_SIZE;
- if (au_close_buffer(au, event, buffer, &buflen) < 0)
- err(EX_UNAVAILABLE, "au_close_buffer");
- fd = open_file(directory, filename);
- write_file(fd, buffer, buflen, filename);
- close(fd);
-}
-
-static struct timeval file_token_timeval = { 0x12345, 0x67890} ;
-
-static void
-generate_file_token(const char *directory, const char *token_filename)
-{
- token_t *file_token;
-
- file_token = au_to_file("test", file_token_timeval);
- if (file_token == NULL)
- err(EX_UNAVAILABLE, "au_to_file");
- write_token(directory, token_filename, file_token);
-}
-
-static void
-generate_file_record(const char *directory, const char *record_filename)
-{
- token_t *file_token;
-
- file_token = au_to_file("test", file_token_timeval);
- if (file_token == NULL)
- err(EX_UNAVAILABLE, "au_to_file");
- write_record(directory, record_filename, file_token, AUE_NULL);
-}
-
-/*
- * AUT_OHEADER
- */
-
-static int trailer_token_len = 0x12345678;
-
-static void
-generate_trailer_token(const char *directory, const char *token_filename)
-{
- token_t *trailer_token;
-
- trailer_token = au_to_trailer(trailer_token_len);
- if (trailer_token == NULL)
- err(EX_UNAVAILABLE, "au_to_trailer");
- write_token(directory, token_filename, trailer_token);
-}
-
-static int header32_token_len = 0x12345678;
-static au_event_t header32_e_type = AUE_OPEN;
-static au_emod_t header32_e_mod = 0x4567;
-static struct timeval header32_tm = { 0x12345, 0x67890 };
-
-static void
-generate_header32_token(const char *directory, const char *token_filename)
-{
- token_t *header32_token;
-
- header32_token = au_to_header32_tm(header32_token_len,
- header32_e_type, header32_e_mod, header32_tm);
- if (header32_token == NULL)
- err(EX_UNAVAILABLE, "au_to_header32");
- write_token(directory, token_filename, header32_token);
-}
-
-/*
- * AUT_HEADER32_EX
- */
-
-static char data_token_unit_print = AUP_STRING;
-static char data_token_unit_type = AUR_CHAR;
-static char *data_token_data = "SomeData";
-static char data_token_unit_count = sizeof("SomeData") + 1;
-
-static void
-generate_data_token(const char *directory, const char *token_filename)
-{
- token_t *data_token;
-
- data_token = au_to_data(data_token_unit_print, data_token_unit_type,
- data_token_unit_count, data_token_data);
- if (data_token == NULL)
- err(EX_UNAVAILABLE, "au_to_data");
- write_token(directory, token_filename, data_token);
-}
-
-static void
-generate_data_record(const char *directory, const char *record_filename)
-{
- token_t *data_token;
-
- data_token = au_to_data(data_token_unit_print, data_token_unit_type,
- data_token_unit_count, data_token_data);
- if (data_token == NULL)
- err(EX_UNAVAILABLE, "au_to_data");
- write_record(directory, record_filename, data_token, AUE_NULL);
-}
-
-static char ipc_type = AT_IPC_MSG;
-static int ipc_id = 0x12345678;
-
-static void
-generate_ipc_token(const char *directory, const char *token_filename)
-{
- token_t *ipc_token;
-
- ipc_token = au_to_ipc(ipc_type, ipc_id);
- if (ipc_token == NULL)
- err(EX_UNAVAILABLE, "au_to_ipc");
- write_token(directory, token_filename, ipc_token);
-}
-
-static void
-generate_ipc_record(const char *directory, const char *record_filename)
-{
- token_t *ipc_token;
-
- ipc_token = au_to_ipc(ipc_type, ipc_id);
- if (ipc_token == NULL)
- err(EX_UNAVAILABLE, "au_to_ipc");
- write_record(directory, record_filename, ipc_token, AUE_NULL);
-}
-
-static char *path_token_path = "/test/this/is/a/test";
-
-static void
-generate_path_token(const char *directory, const char *token_filename)
-{
- token_t *path_token;
-
- path_token = au_to_path(path_token_path);
- if (path_token == NULL)
- err(EX_UNAVAILABLE, "au_to_path");
- write_token(directory, token_filename, path_token);
-}
-
-static void
-generate_path_record(const char *directory, const char *record_filename)
-{
- token_t *path_token;
-
- path_token = au_to_path(path_token_path);
- if (path_token == NULL)
- err(EX_UNAVAILABLE, "au_to_path");
- write_record(directory, record_filename, path_token, AUE_NULL);
-}
-
-static au_id_t subject32_auid = 0x12345678;
-static uid_t subject32_euid = 0x01234567;
-static gid_t subject32_egid = 0x23456789;
-static uid_t subject32_ruid = 0x98765432;
-static gid_t subject32_rgid = 0x09876543;
-static pid_t subject32_pid = 0x13243546;
-static au_asid_t subject32_sid = 0x97867564;
-static au_tid_t subject32_tid = { 0x16593746 };
-static au_tid_addr_t subject32_tid_addr = { 0x16593746 };
-
-static void
-generate_subject32_token(const char *directory, const char *token_filename)
-{
- token_t *subject32_token;
-
- subject32_tid.machine = inet_addr("127.0.0.1");
-
- subject32_token = au_to_subject32(subject32_auid, subject32_euid,
- subject32_egid, subject32_ruid, subject32_rgid, subject32_pid,
- subject32_sid, &subject32_tid);
- if (subject32_token == NULL)
- err(EX_UNAVAILABLE, "au_to_subject32");
- write_token(directory, token_filename, subject32_token);
-}
-
-static void
-generate_subject32_record(const char *directory, const char *record_filename)
-{
- token_t *subject32_token;
-
- subject32_tid.machine = inet_addr("127.0.0.1");
-
- subject32_token = au_to_subject32(subject32_auid, subject32_euid,
- subject32_egid, subject32_ruid, subject32_rgid, subject32_pid,
- subject32_sid, &subject32_tid);
- if (subject32_token == NULL)
- err(EX_UNAVAILABLE, "au_to_subject32");
- write_record(directory, record_filename, subject32_token, AUE_NULL);
-}
-
-static void
-generate_subject32ex_token(const char *directory, const char *token_filename,
- u_int32_t type)
-{
- token_t *subject32ex_token;
- char *buf;
-
- buf = (char *)malloc(strlen(token_filename) + 6);
- if (type == AU_IPv6) {
- inet_pton(AF_INET6, "fe80::1", subject32_tid_addr.at_addr);
- subject32_tid_addr.at_type = AU_IPv6;
- sprintf(buf, "%s%s", token_filename, "-IPv6");
- } else {
- subject32_tid_addr.at_addr[0] = inet_addr("127.0.0.1");
- subject32_tid_addr.at_type = AU_IPv4;
- sprintf(buf, "%s%s", token_filename, "-IPv4");
- }
-
- subject32ex_token = au_to_subject32_ex(subject32_auid, subject32_euid,
- subject32_egid, subject32_ruid, subject32_rgid, subject32_pid,
- subject32_sid, &subject32_tid_addr);
- if (subject32ex_token == NULL)
- err(EX_UNAVAILABLE, "au_to_subject32_ex");
- write_token(directory, buf, subject32ex_token);
- free(buf);
-}
-
-static void
-generate_subject32ex_record(const char *directory, const char *record_filename,
- u_int32_t type)
-{
- token_t *subject32ex_token;
- char *buf;
-
- buf = (char *)malloc(strlen(record_filename) + 6);
- if (type == AU_IPv6) {
- inet_pton(AF_INET6, "fe80::1", subject32_tid_addr.at_addr);
- subject32_tid_addr.at_type = AU_IPv6;
- sprintf(buf, "%s%s", record_filename, "-IPv6");
- } else {
- subject32_tid_addr.at_addr[0] = inet_addr("127.0.0.1");
- subject32_tid_addr.at_type = AU_IPv4;
- sprintf(buf, "%s%s", record_filename, "-IPv4");
- }
-
- subject32ex_token = au_to_subject32_ex(subject32_auid, subject32_euid,
- subject32_egid, subject32_ruid, subject32_rgid, subject32_pid,
- subject32_sid, &subject32_tid_addr);
- if (subject32ex_token == NULL)
- err(EX_UNAVAILABLE, "au_to_subject32_ex");
- write_record(directory, record_filename, subject32ex_token, AUE_NULL);
- free(buf);
-}
-
-static au_id_t process32_auid = 0x12345678;
-static uid_t process32_euid = 0x01234567;
-static gid_t process32_egid = 0x23456789;
-static uid_t process32_ruid = 0x98765432;
-static gid_t process32_rgid = 0x09876543;
-static pid_t process32_pid = 0x13243546;
-static au_asid_t process32_sid = 0x97867564;
-static au_tid_t process32_tid = { 0x16593746 };
-static au_tid_addr_t process32_tid_addr = { 0x16593746 };
-
-static void
-generate_process32_token(const char *directory, const char *token_filename)
-{
- token_t *process32_token;
-
- process32_tid.machine = inet_addr("127.0.0.1");
-
- process32_token = au_to_process32(process32_auid, process32_euid,
- process32_egid, process32_ruid, process32_rgid, process32_pid,
- process32_sid, &process32_tid);
- if (process32_token == NULL)
- err(EX_UNAVAILABLE, "au_to_process32");
- write_token(directory, token_filename, process32_token);
-}
-
-static void
-generate_process32_record(const char *directory, const char *record_filename)
-{
- token_t *process32_token;
-
- process32_tid.machine = inet_addr("127.0.0.1");
-
- process32_token = au_to_process32(process32_auid, process32_euid,
- process32_egid, process32_ruid, process32_rgid, process32_pid,
- process32_sid, &process32_tid);
- if (process32_token == NULL)
- err(EX_UNAVAILABLE, "au_ti_process32");
- write_record(directory, record_filename, process32_token, AUE_NULL);
-}
-
-static void
-generate_process32ex_token(const char *directory, const char *token_filename,
- u_int32_t type)
-{
- token_t *process32ex_token;
- char *buf;
-
- buf = (char *)malloc(strlen(token_filename) + 6);
- if (type == AU_IPv6) {
- inet_pton(AF_INET6, "fe80::1", process32_tid_addr.at_addr);
- process32_tid_addr.at_type = AU_IPv6;
- sprintf(buf, "%s%s", token_filename, "-IPv6");
- } else {
- process32_tid_addr.at_addr[0] = inet_addr("127.0.0.1");
- process32_tid_addr.at_type = AU_IPv4;
- sprintf(buf, "%s%s", token_filename, "-IPv4");
- }
-
- process32ex_token = au_to_process32_ex(process32_auid, process32_euid,
- process32_egid, process32_ruid, process32_rgid, process32_pid,
- process32_sid, &process32_tid_addr);
- if (process32ex_token == NULL)
- err(EX_UNAVAILABLE, "au_to_process32_ex");
- write_token(directory, buf, process32ex_token);
- free(buf);
-}
-
-static void
-generate_process32ex_record(const char *directory, const char *record_filename,
- u_int32_t type)
-{
- token_t *process32ex_token;
- char *buf;
-
- buf = (char *)malloc(strlen(record_filename) + 6);
- if (type == AU_IPv6) {
- inet_pton(AF_INET6, "fe80::1", process32_tid_addr.at_addr);
- process32_tid_addr.at_type = AU_IPv6;
- sprintf(buf, "%s%s", record_filename, "-IPv6");
- } else {
- process32_tid_addr.at_addr[0] = inet_addr("127.0.0.1");
- process32_tid_addr.at_type = AU_IPv4;
- sprintf(buf, "%s%s", record_filename, "-IPv4");
- }
-
- process32ex_token = au_to_process32_ex(process32_auid, process32_euid,
- process32_egid, process32_ruid, process32_rgid, process32_pid,
- process32_sid, &process32_tid_addr);
- if (process32ex_token == NULL)
- err(EX_UNAVAILABLE, "au_to_process32_ex");
- write_record(directory, buf, process32ex_token, AUE_NULL);
- free(buf);
-}
-
-static au_id_t process64_auid = 0x12345678;
-static uid_t process64_euid = 0x01234567;
-static gid_t process64_egid = 0x23456789;
-static uid_t process64_ruid = 0x98765432;
-static gid_t process64_rgid = 0x09876543;
-static pid_t process64_pid = 0x13243546;
-static au_asid_t process64_sid = 0x97867564;
-static au_tid_t process64_tid = { 0x16593746 };
-static au_tid_addr_t process64_tid_addr = { 0x16593746 };
-
-static void
-generate_process64_token(const char *directory, const char *token_filename)
-{
- token_t *process64_token;
-
- process64_tid.machine = inet_addr("127.0.0.1");
-
- process64_token = au_to_process64(process64_auid, process64_euid,
- process64_egid, process64_ruid, process64_rgid, process64_pid,
- process64_sid, &process64_tid);
- if (process64_token == NULL)
- err(EX_UNAVAILABLE, "au_to_process64");
- write_token(directory, token_filename, process64_token);
-}
-
-static void
-generate_process64_record(const char *directory, const char *record_filename)
-{
- token_t *process64_token;
-
- process64_tid.machine = inet_addr("127.0.0.1");
-
- process64_token = au_to_process64(process64_auid, process64_euid,
- process64_egid, process64_ruid, process64_rgid, process64_pid,
- process64_sid, &process64_tid);
- if (process64_token == NULL)
- err(EX_UNAVAILABLE, "au_ti_process64");
- write_record(directory, record_filename, process64_token, AUE_NULL);
-}
-
-static void
-generate_process64ex_token(const char *directory, const char *token_filename,
- u_int32_t type)
-{
- token_t *process64ex_token;
- char *buf;
-
- buf = (char *)malloc(strlen(token_filename) + 6);
- if (type == AU_IPv6) {
- inet_pton(AF_INET6, "fe80::1", process64_tid_addr.at_addr);
- process64_tid_addr.at_type = AU_IPv6;
- sprintf(buf, "%s%s", token_filename, "-IPv6");
- } else {
- process64_tid_addr.at_addr[0] = inet_addr("127.0.0.1");
- process64_tid_addr.at_type = AU_IPv4;
- sprintf(buf, "%s%s", token_filename, "-IPv4");
- }
-
- process64ex_token = au_to_process64_ex(process64_auid, process64_euid,
- process64_egid, process64_ruid, process64_rgid, process64_pid,
- process64_sid, &process64_tid_addr);
- if (process64ex_token == NULL)
- err(EX_UNAVAILABLE, "au_to_process64_ex");
- write_token(directory, buf, process64ex_token);
- free(buf);
-}
-
-static void
-generate_process64ex_record(const char *directory, const char *record_filename,
- u_int32_t type)
-{
- token_t *process64ex_token;
- char *buf;
-
- buf = (char *)malloc(strlen(record_filename) + 6);
- if (type == AU_IPv6) {
- inet_pton(AF_INET6, "fe80::1", process64_tid_addr.at_addr);
- process64_tid_addr.at_type = AU_IPv6;
- sprintf(buf, "%s%s", record_filename, "-IPv6");
- } else {
- process64_tid_addr.at_addr[0] = inet_addr("127.0.0.1");
- process64_tid_addr.at_type = AU_IPv4;
- sprintf(buf, "%s%s", record_filename, "-IPv4");
- }
-
- process64ex_token = au_to_process64_ex(process64_auid, process64_euid,
- process64_egid, process64_ruid, process64_rgid, process64_pid,
- process64_sid, &process64_tid_addr);
- if (process64ex_token == NULL)
- err(EX_UNAVAILABLE, "au_to_process64_ex");
- write_record(directory, buf, process64ex_token, AUE_NULL);
- free(buf);
-}
-
-static char return32_status = 0xd7;
-static uint32_t return32_ret = 0x12345678;
-
-static void
-generate_return32_token(const char *directory, const char *token_filename)
-{
- token_t *return32_token;
-
- return32_token = au_to_return32(return32_status, return32_ret);
- if (return32_token == NULL)
- err(EX_UNAVAILABLE, "au_to_return32");
- write_token(directory, token_filename, return32_token);
-}
-
-static void
-generate_return32_record(const char *directory, const char *record_filename)
-{
- token_t *return32_token;
-
- return32_token = au_to_return32(return32_status, return32_ret);
- if (return32_token == NULL)
- err(EX_UNAVAILABLE, "au_to_return32");
- write_record(directory, record_filename, return32_token, AUE_NULL);
-}
-
-static char *text_token_text = "This is a test.";
-
-static void
-generate_text_token(const char *directory, const char *token_filename)
-{
- token_t *text_token;
-
- text_token = au_to_text(text_token_text);
- if (text_token == NULL)
- err(EX_UNAVAILABLE, "au_to_text");
- write_token(directory, token_filename, text_token);
-}
-
-static void
-generate_text_record(const char *directory, const char *record_filename)
-{
- token_t *text_token;
-
- text_token = au_to_text(text_token_text);
- if (text_token == NULL)
- err(EX_UNAVAILABLE, "au_to_text");
- write_record(directory, record_filename, text_token, AUE_NULL);
-}
-
-static char opaque_token_data[] = {0xaa, 0xbb, 0xcc, 0xdd};
-static int opaque_token_bytes = sizeof(opaque_token_data);
-
-static void
-generate_opaque_token(const char *directory, const char *token_filename)
-{
- token_t *opaque_token;
-
- opaque_token = au_to_opaque(opaque_token_data, opaque_token_bytes);
- if (opaque_token == NULL)
- err(EX_UNAVAILABLE, "au_to_opaque");
- write_token(directory, token_filename, opaque_token);
-}
-
-static void
-generate_opaque_record(const char *directory, const char *record_filename)
-{
- token_t *opaque_token;
-
- opaque_token = au_to_opaque(opaque_token_data, opaque_token_bytes);
- if (opaque_token == NULL)
- err(EX_UNAVAILABLE, "au_to_opaque");
- write_record(directory, record_filename, opaque_token, AUE_NULL);
-}
-
-static struct in_addr in_addr_token_addr;
-
-static void
-generate_in_addr_token(const char *directory, const char *token_filename)
-{
- token_t *in_addr_token;
-
- in_addr_token_addr.s_addr = inet_addr("192.168.100.15");
-
- in_addr_token = au_to_in_addr(&in_addr_token_addr);
- if (in_addr_token == NULL)
- err(EX_UNAVAILABLE, "au_to_in_addr");
- write_token(directory, token_filename, in_addr_token);
-}
-
-static void
-generate_in_addr_record(const char *directory, const char *record_filename)
-{
- token_t *in_addr_token;
-
- in_addr_token_addr.s_addr = inet_addr("192.168.100.15");
-
- in_addr_token = au_to_in_addr(&in_addr_token_addr);
- if (in_addr_token == NULL)
- err(EX_UNAVAILABLE, "au_to_in_addr");
- write_record(directory, record_filename, in_addr_token, AUE_NULL);
-}
-
-static struct ip ip_token_ip;
-static u_char ip_token_ip_v = 4;
-static uint16_t ip_token_ip_id = 0x5478;
-static u_char ip_token_ip_ttl = 64;
-static u_char ip_token_ip_p = IPPROTO_ICMP;
-static struct in_addr ip_token_ip_src;
-static struct in_addr ip_token_ip_dst;
-
-static void
-generate_ip_token(const char *directory, const char *token_filename)
-{
- token_t *ip_token;
-
- ip_token_ip_src.s_addr = inet_addr("192.168.100.155");
- ip_token_ip_dst.s_addr = inet_addr("192.168.110.48");
-
- memset(&ip_token_ip, 0, sizeof(ip_token_ip));
- ip_token_ip.ip_v = ip_token_ip_v;
- ip_token_ip.ip_len = htons(sizeof(ip_token_ip));
- ip_token_ip.ip_id = htons(ip_token_ip_id);
- ip_token_ip.ip_ttl = ip_token_ip_ttl;
- ip_token_ip.ip_p = ip_token_ip_p;
- ip_token_ip.ip_src = ip_token_ip_src;
- ip_token_ip.ip_dst = ip_token_ip_dst;
-
- ip_token = au_to_ip(&ip_token_ip);
- if (ip_token == NULL)
- err(EX_UNAVAILABLE, "au_to_ip");
- write_token(directory, token_filename, ip_token);
-}
-
-static void
-generate_ip_record(const char *directory, const char *record_filename)
-{
- token_t *ip_token;
-
- ip_token_ip_src.s_addr = inet_addr("192.168.100.155");
- ip_token_ip_dst.s_addr = inet_addr("192.168.110.48");
-
- memset(&ip_token_ip, 0, sizeof(ip_token_ip));
- ip_token_ip.ip_v = ip_token_ip_v;
- ip_token_ip.ip_len = htons(sizeof(ip_token_ip));
- ip_token_ip.ip_id = htons(ip_token_ip_id);
- ip_token_ip.ip_ttl = ip_token_ip_ttl;
- ip_token_ip.ip_p = ip_token_ip_p;
- ip_token_ip.ip_src = ip_token_ip_src;
- ip_token_ip.ip_dst = ip_token_ip_dst;
-
- ip_token = au_to_ip(&ip_token_ip);
- if (ip_token == NULL)
- err(EX_UNAVAILABLE, "au_to_ip");
- write_record(directory, record_filename, ip_token, AUE_NULL);
-}
-
-static u_int16_t iport_token_iport;
-
-static void
-generate_iport_token(const char *directory, const char *token_filename)
-{
- token_t *iport_token;
-
- iport_token_iport = htons(80);
-
- iport_token = au_to_iport(iport_token_iport);
- if (iport_token == NULL)
- err(EX_UNAVAILABLE, "au_to_iport");
- write_token(directory, token_filename, iport_token);
-}
-
-static void
-generate_iport_record(const char *directory, const char *record_filename)
-{
- token_t *iport_token;
-
- iport_token_iport = htons(80);
-
- iport_token = au_to_iport(iport_token_iport);
- if (iport_token == NULL)
- err(EX_UNAVAILABLE, "au_to_iport");
- write_record(directory, record_filename, iport_token, AUE_NULL);
-}
-
-static char arg32_token_n = 3;
-static char *arg32_token_text = "test_arg32_token";
-static uint32_t arg32_token_v = 0xabcdef00;
-
-static void
-generate_arg32_token(const char *directory, const char *token_filename)
-{
- token_t *arg32_token;
-
- arg32_token = au_to_arg32(arg32_token_n, arg32_token_text,
- arg32_token_v);
- if (arg32_token == NULL)
- err(EX_UNAVAILABLE, "au_to_arg32");
- write_token(directory, token_filename, arg32_token);
-}
-
-static void
-generate_arg32_record(const char *directory, const char *record_filename)
-{
- token_t *arg32_token;
-
- arg32_token = au_to_arg32(arg32_token_n, arg32_token_text,
- arg32_token_v);
- if (arg32_token == NULL)
- err(EX_UNAVAILABLE, "au_to_arg32");
- write_record(directory, record_filename, arg32_token, AUE_NULL);
-}
-
-static long seq_audit_count = 0x12345678;
-
-static void
-generate_seq_token(const char *directory, const char *token_filename)
-{
- token_t *seq_token;
-
- seq_token = au_to_seq(seq_audit_count);
- if (seq_token == NULL)
- err(EX_UNAVAILABLE, "au_to_seq");
- write_token(directory, token_filename, seq_token);
-}
-
-static void
-generate_seq_record(const char *directory, const char *record_filename)
-{
- token_t *seq_token;
-
- seq_token = au_to_seq(seq_audit_count);
- if (seq_token == NULL)
- err(EX_UNAVAILABLE, "au_to_seq");
- write_record(directory, record_filename, seq_token, AUE_NULL);
-}
-
-/*
- * AUT_ACL
- */
-
-static void
-generate_attr_token(const char *directory, const char *token_filename)
-{
- token_t *attr_token;
-
-}
-
-static void
-generate_attr_record(const char *directory, const char *record_filename)
-{
- token_t *attr_token;
-
-}
-
-static void
-generate_ipc_perm_token(const char *directory, const char *token_filename)
-{
- token_t *ipc_perm_token;
-
-}
-
-static void
-generate_ipc_perm_record(const char *directory, const char *record_filename)
-{
- token_t *ipc_perm_token;
-
-}
-
-/*
- * AUT_LABEL
- */
-
-static void
-generate_groups_token(const char *directory, const char *token_filename)
-{
- token_t *groups_token;
-
-}
-
-static void
-generate_groups_record(const char *directory, const char *record_filename)
-{
- token_t *groups_token;
-
-}
-
-/*
- * AUT_ILABEL
- */
-
-/*
- * AUT_SLABEL
- */
-
-/*
- * AUT_CLEAR
- */
-
-/*
- * AUT_PRIV
- */
-
-/*
- * AUT_UPRIV
- */
-
-/*
- * AUT_LIAISON
- */
-
-/*
- * AUT_NEWGROUPS
- */
-
-/*
- * AUT_EXEC_ARGS
- */
-
-/*
- * AUT_EXEC_ENV
- */
-
-static void
-generate_attr32_token(const char *directory, const char *token_filename)
-{
- token_t *attr32_token;
-
-}
-
-static void
-generate_attr32_record(const char *directory, const char *record_filename)
-{
- token_t *attr32_token;
-
-}
-
-static char *zonename_sample = "testzone";
-
-static void
-generate_zonename_token(const char *directory, const char *token_filename)
-{
- token_t *zonename_token;
-
- zonename_token = au_to_zonename(zonename_sample);
- if (zonename_token == NULL)
- err(EX_UNAVAILABLE, "au_to_zonename");
- write_token(directory, token_filename, zonename_token);
-}
-
-static void
-generate_zonename_record(const char *directory, const char *record_filename)
-{
- token_t *zonename_token;
-
- zonename_token = au_to_zonename(zonename_sample);
- if (zonename_token == NULL)
- err(EX_UNAVAILABLE, "au_to_zonename");
- write_record(directory, record_filename, zonename_token, AUE_NULL);
-}
-
-int
-main(int argc, char *argv[])
-{
- const char *directory;
- int ch;
-
- while ((ch = getopt(argc, argv, "rt")) != -1) {
- switch (ch) {
- case 'r':
- do_records++;
- break;
-
- case 't':
- do_tokens++;
- break;
-
- default:
- usage();
- }
- }
-
- argc -= optind;
- argv += optind;
-
- if (argc != 1)
- usage();
-
- directory = argv[0];
-
- if (mkdir(directory, 0755) < 0 && errno != EEXIST)
- err(EX_OSERR, "mkdir: %s", directory);
-
- if (do_tokens) {
- generate_file_token(directory, "file_token");
- generate_trailer_token(directory, "trailer_token");
- generate_header32_token(directory, "header32_token");
- generate_data_token(directory, "data_token");
- generate_ipc_token(directory, "ipc_token");
- generate_path_token(directory, "path_token");
- generate_subject32_token(directory, "subject32_token");
- generate_subject32ex_token(directory, "subject32ex_token",
- AU_IPv4);
- generate_subject32ex_token(directory, "subject32ex_token",
- AU_IPv6);
- generate_process32_token(directory, "process32_token");
- generate_process32ex_token(directory, "process32ex_token",
- AU_IPv4);
- generate_process32ex_token(directory, "process32ex_token",
- AU_IPv6);
- generate_process64_token(directory, "process64_token");
- generate_process64ex_token(directory, "process64ex_token",
- AU_IPv4);
- generate_process64ex_token(directory, "process64ex_token",
- AU_IPv6);
- generate_return32_token(directory, "return32_token");
- generate_text_token(directory, "text_token");
- generate_opaque_token(directory, "opaque_token");
- generate_in_addr_token(directory, "in_addr_token");
- generate_ip_token(directory, "ip_token");
- generate_iport_token(directory, "iport_token");
- generate_arg32_token(directory, "arg32_token");
- generate_seq_token(directory, "seq_token");
- generate_attr_token(directory, "attr_token");
- generate_ipc_perm_token(directory, "ipc_perm_token");
- generate_groups_token(directory, "groups_token");
- generate_attr32_token(directory, "attr32_token");
- generate_zonename_token(directory, "zonename_token");
- }
-
- if (do_records) {
- generate_file_record(directory, "file_record");
- generate_data_record(directory, "data_record");
- generate_ipc_record(directory, "ipc_record");
- generate_path_record(directory, "path_record");
- generate_subject32_record(directory, "subject32_record");
- generate_subject32ex_record(directory, "subject32ex_record",
- AU_IPv4);
- generate_subject32ex_record(directory, "subject32ex_record",
- AU_IPv6);
- generate_process32_record(directory, "process32_record");
- generate_process32ex_record(directory, "process32ex_record",
- AU_IPv4);
- generate_process32ex_record(directory, "process32ex_record",
- AU_IPv6);
- generate_process64_record(directory, "process64_record");
- generate_process64ex_record(directory, "process64ex_record",
- AU_IPv4);
- generate_process64ex_record(directory, "process64ex_record",
- AU_IPv6);
- generate_return32_record(directory, "return32_record");
- generate_text_record(directory, "text_record");
- generate_opaque_record(directory, "opaque_record");
- generate_in_addr_record(directory, "in_addr_record");
- generate_ip_record(directory, "ip_record");
- generate_iport_record(directory, "iport_record");
- generate_arg32_record(directory, "arg32_record");
- generate_seq_record(directory, "seq_record");
- generate_attr_record(directory, "attr_record");
- generate_ipc_perm_record(directory, "ipc_perm_record");
- generate_groups_record(directory, "groups_record");
- generate_attr32_record(directory, "attr32_record");
- generate_zonename_record(directory, "zonename_record");
- }
-
- return (0);
-}
Copied: vendor/openbsm/1.2_alpha4/test/bsm/generate.c (from rev 11163, vendor/openbsm/dist/test/bsm/generate.c)
===================================================================
--- vendor/openbsm/1.2_alpha4/test/bsm/generate.c (rev 0)
+++ vendor/openbsm/1.2_alpha4/test/bsm/generate.c 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,1155 @@
+/*-
+ * Copyright (c) 2006-2007 Robert N. M. Watson
+ * Copyright (c) 2008 Apple Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+/*
+ * Generate a series of BSM token samples in the requested directory.
+ */
+
+#include <sys/types.h>
+#include <sys/socket.h>
+#include <sys/stat.h>
+
+#include <netinet/in.h>
+#include <netinet/in_systm.h>
+#include <netinet/ip.h>
+
+#include <arpa/inet.h>
+
+#include <bsm/audit_kevents.h>
+#include <bsm/libbsm.h>
+
+#include <err.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <limits.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sysexits.h>
+#include <unistd.h>
+
+static int do_records, do_tokens;
+
+static void
+usage(void)
+{
+
+ fprintf(stderr, "generate [-rt] path\n");
+ exit(EX_USAGE);
+}
+
+static int
+open_file(const char *directory, const char *name)
+{
+ char pathname[PATH_MAX];
+ int fd;
+
+ snprintf(pathname, PATH_MAX, "%s/%s", directory, name);
+ (void)unlink(pathname);
+ fd = open(pathname, O_WRONLY | O_CREAT | O_EXCL, 0600);
+ if (fd < 0)
+ err(EX_CANTCREAT, "open: %s", name);
+ return (fd);
+}
+
+static void
+write_file(int fd, void *buffer, size_t buflen, const char *filename)
+{
+ ssize_t len;
+
+ len = write(fd, buffer, buflen);
+ if (len < 0)
+ err(EX_OSERR, "write_file: %s", filename);
+ if (len < buflen)
+ err(EX_OSERR, "write_file: short write: %s", filename);
+}
+
+/*
+ * Write a single token to a file.
+ */
+static void
+write_token(const char *directory, const char *filename, token_t *tok)
+{
+ u_char buffer[MAX_AUDIT_RECORD_SIZE];
+ size_t buflen;
+ int fd;
+
+ buflen = MAX_AUDIT_RECORD_SIZE;
+ if (au_close_token(tok, buffer, &buflen) < 0)
+ err(EX_UNAVAILABLE, "au_close_token");
+ fd = open_file(directory, filename);
+ write_file(fd, buffer, buflen, filename);
+ close(fd);
+}
+
+/*
+ * Write a token to a file, wrapped in audit record header and trailer.
+ */
+static void
+write_record(const char *directory, const char *filename, token_t *tok,
+ short event)
+{
+ u_char buffer[MAX_AUDIT_RECORD_SIZE];
+ size_t buflen;
+ int au, fd;
+
+ au = au_open();
+ if (au < 0)
+ err(EX_UNAVAILABLE, "au_open");
+ if (au_write(au, tok) < 0)
+ err(EX_UNAVAILABLE, "au_write");
+ buflen = MAX_AUDIT_RECORD_SIZE;
+ if (au_close_buffer(au, event, buffer, &buflen) < 0)
+ err(EX_UNAVAILABLE, "au_close_buffer");
+ fd = open_file(directory, filename);
+ write_file(fd, buffer, buflen, filename);
+ close(fd);
+}
+
+static struct timeval file_token_timeval = { 0x12345, 0x67890} ;
+
+static void
+generate_file_token(const char *directory, const char *token_filename)
+{
+ token_t *file_token;
+
+ file_token = au_to_file("test", file_token_timeval);
+ if (file_token == NULL)
+ err(EX_UNAVAILABLE, "au_to_file");
+ write_token(directory, token_filename, file_token);
+}
+
+static void
+generate_file_record(const char *directory, const char *record_filename)
+{
+ token_t *file_token;
+
+ file_token = au_to_file("test", file_token_timeval);
+ if (file_token == NULL)
+ err(EX_UNAVAILABLE, "au_to_file");
+ write_record(directory, record_filename, file_token, AUE_NULL);
+}
+
+/*
+ * AUT_OHEADER
+ */
+
+static int trailer_token_len = 0x12345678;
+
+static void
+generate_trailer_token(const char *directory, const char *token_filename)
+{
+ token_t *trailer_token;
+
+ trailer_token = au_to_trailer(trailer_token_len);
+ if (trailer_token == NULL)
+ err(EX_UNAVAILABLE, "au_to_trailer");
+ write_token(directory, token_filename, trailer_token);
+}
+
+static int header32_token_len = 0x12345678;
+static au_event_t header32_e_type = AUE_OPEN;
+static au_emod_t header32_e_mod = 0x4567;
+static struct timeval header32_tm = { 0x12345, 0x67890 };
+
+static void
+generate_header32_token(const char *directory, const char *token_filename)
+{
+ token_t *header32_token;
+
+ header32_token = au_to_header32_tm(header32_token_len,
+ header32_e_type, header32_e_mod, header32_tm);
+ if (header32_token == NULL)
+ err(EX_UNAVAILABLE, "au_to_header32");
+ write_token(directory, token_filename, header32_token);
+}
+
+/*
+ * AUT_HEADER32_EX
+ */
+
+static char data_token_unit_print = AUP_STRING;
+static char data_token_unit_type = AUR_CHAR;
+static char *data_token_data = "SomeData";
+static char data_token_unit_count = sizeof("SomeData") + 1;
+
+static void
+generate_data_token(const char *directory, const char *token_filename)
+{
+ token_t *data_token;
+
+ data_token = au_to_data(data_token_unit_print, data_token_unit_type,
+ data_token_unit_count, data_token_data);
+ if (data_token == NULL)
+ err(EX_UNAVAILABLE, "au_to_data");
+ write_token(directory, token_filename, data_token);
+}
+
+static void
+generate_data_record(const char *directory, const char *record_filename)
+{
+ token_t *data_token;
+
+ data_token = au_to_data(data_token_unit_print, data_token_unit_type,
+ data_token_unit_count, data_token_data);
+ if (data_token == NULL)
+ err(EX_UNAVAILABLE, "au_to_data");
+ write_record(directory, record_filename, data_token, AUE_NULL);
+}
+
+static char ipc_type = AT_IPC_MSG;
+static int ipc_id = 0x12345678;
+
+static void
+generate_ipc_token(const char *directory, const char *token_filename)
+{
+ token_t *ipc_token;
+
+ ipc_token = au_to_ipc(ipc_type, ipc_id);
+ if (ipc_token == NULL)
+ err(EX_UNAVAILABLE, "au_to_ipc");
+ write_token(directory, token_filename, ipc_token);
+}
+
+static void
+generate_ipc_record(const char *directory, const char *record_filename)
+{
+ token_t *ipc_token;
+
+ ipc_token = au_to_ipc(ipc_type, ipc_id);
+ if (ipc_token == NULL)
+ err(EX_UNAVAILABLE, "au_to_ipc");
+ write_record(directory, record_filename, ipc_token, AUE_NULL);
+}
+
+static char *path_token_path = "/test/this/is/a/test";
+
+static void
+generate_path_token(const char *directory, const char *token_filename)
+{
+ token_t *path_token;
+
+ path_token = au_to_path(path_token_path);
+ if (path_token == NULL)
+ err(EX_UNAVAILABLE, "au_to_path");
+ write_token(directory, token_filename, path_token);
+}
+
+static void
+generate_path_record(const char *directory, const char *record_filename)
+{
+ token_t *path_token;
+
+ path_token = au_to_path(path_token_path);
+ if (path_token == NULL)
+ err(EX_UNAVAILABLE, "au_to_path");
+ write_record(directory, record_filename, path_token, AUE_NULL);
+}
+
+static au_id_t subject32_auid = 0x12345678;
+static uid_t subject32_euid = 0x01234567;
+static gid_t subject32_egid = 0x23456789;
+static uid_t subject32_ruid = 0x98765432;
+static gid_t subject32_rgid = 0x09876543;
+static pid_t subject32_pid = 0x13243546;
+static au_asid_t subject32_sid = 0x97867564;
+static au_tid_t subject32_tid = { 0x16593746 };
+static au_tid_addr_t subject32_tid_addr = { 0x16593746 };
+
+static void
+generate_subject32_token(const char *directory, const char *token_filename)
+{
+ token_t *subject32_token;
+
+ subject32_tid.machine = inet_addr("127.0.0.1");
+
+ subject32_token = au_to_subject32(subject32_auid, subject32_euid,
+ subject32_egid, subject32_ruid, subject32_rgid, subject32_pid,
+ subject32_sid, &subject32_tid);
+ if (subject32_token == NULL)
+ err(EX_UNAVAILABLE, "au_to_subject32");
+ write_token(directory, token_filename, subject32_token);
+}
+
+static void
+generate_subject32_record(const char *directory, const char *record_filename)
+{
+ token_t *subject32_token;
+
+ subject32_tid.machine = inet_addr("127.0.0.1");
+
+ subject32_token = au_to_subject32(subject32_auid, subject32_euid,
+ subject32_egid, subject32_ruid, subject32_rgid, subject32_pid,
+ subject32_sid, &subject32_tid);
+ if (subject32_token == NULL)
+ err(EX_UNAVAILABLE, "au_to_subject32");
+ write_record(directory, record_filename, subject32_token, AUE_NULL);
+}
+
+static void
+generate_subject32ex_token(const char *directory, const char *token_filename,
+ u_int32_t type)
+{
+ token_t *subject32ex_token;
+ char *buf;
+
+ buf = (char *)malloc(strlen(token_filename) + 6);
+ if (type == AU_IPv6) {
+ inet_pton(AF_INET6, "fe80::1", subject32_tid_addr.at_addr);
+ subject32_tid_addr.at_type = AU_IPv6;
+ sprintf(buf, "%s%s", token_filename, "-IPv6");
+ } else {
+ subject32_tid_addr.at_addr[0] = inet_addr("127.0.0.1");
+ subject32_tid_addr.at_type = AU_IPv4;
+ sprintf(buf, "%s%s", token_filename, "-IPv4");
+ }
+
+ subject32ex_token = au_to_subject32_ex(subject32_auid, subject32_euid,
+ subject32_egid, subject32_ruid, subject32_rgid, subject32_pid,
+ subject32_sid, &subject32_tid_addr);
+ if (subject32ex_token == NULL)
+ err(EX_UNAVAILABLE, "au_to_subject32_ex");
+ write_token(directory, buf, subject32ex_token);
+ free(buf);
+}
+
+static void
+generate_subject32ex_record(const char *directory, const char *record_filename,
+ u_int32_t type)
+{
+ token_t *subject32ex_token;
+ char *buf;
+
+ buf = (char *)malloc(strlen(record_filename) + 6);
+ if (type == AU_IPv6) {
+ inet_pton(AF_INET6, "fe80::1", subject32_tid_addr.at_addr);
+ subject32_tid_addr.at_type = AU_IPv6;
+ sprintf(buf, "%s%s", record_filename, "-IPv6");
+ } else {
+ subject32_tid_addr.at_addr[0] = inet_addr("127.0.0.1");
+ subject32_tid_addr.at_type = AU_IPv4;
+ sprintf(buf, "%s%s", record_filename, "-IPv4");
+ }
+
+ subject32ex_token = au_to_subject32_ex(subject32_auid, subject32_euid,
+ subject32_egid, subject32_ruid, subject32_rgid, subject32_pid,
+ subject32_sid, &subject32_tid_addr);
+ if (subject32ex_token == NULL)
+ err(EX_UNAVAILABLE, "au_to_subject32_ex");
+ write_record(directory, record_filename, subject32ex_token, AUE_NULL);
+ free(buf);
+}
+
+static au_id_t process32_auid = 0x12345678;
+static uid_t process32_euid = 0x01234567;
+static gid_t process32_egid = 0x23456789;
+static uid_t process32_ruid = 0x98765432;
+static gid_t process32_rgid = 0x09876543;
+static pid_t process32_pid = 0x13243546;
+static au_asid_t process32_sid = 0x97867564;
+static au_tid_t process32_tid = { 0x16593746 };
+static au_tid_addr_t process32_tid_addr = { 0x16593746 };
+
+static void
+generate_process32_token(const char *directory, const char *token_filename)
+{
+ token_t *process32_token;
+
+ process32_tid.machine = inet_addr("127.0.0.1");
+
+ process32_token = au_to_process32(process32_auid, process32_euid,
+ process32_egid, process32_ruid, process32_rgid, process32_pid,
+ process32_sid, &process32_tid);
+ if (process32_token == NULL)
+ err(EX_UNAVAILABLE, "au_to_process32");
+ write_token(directory, token_filename, process32_token);
+}
+
+static void
+generate_process32_record(const char *directory, const char *record_filename)
+{
+ token_t *process32_token;
+
+ process32_tid.machine = inet_addr("127.0.0.1");
+
+ process32_token = au_to_process32(process32_auid, process32_euid,
+ process32_egid, process32_ruid, process32_rgid, process32_pid,
+ process32_sid, &process32_tid);
+ if (process32_token == NULL)
+ err(EX_UNAVAILABLE, "au_ti_process32");
+ write_record(directory, record_filename, process32_token, AUE_NULL);
+}
+
+static void
+generate_process32ex_token(const char *directory, const char *token_filename,
+ u_int32_t type)
+{
+ token_t *process32ex_token;
+ char *buf;
+
+ buf = (char *)malloc(strlen(token_filename) + 6);
+ if (type == AU_IPv6) {
+ inet_pton(AF_INET6, "fe80::1", process32_tid_addr.at_addr);
+ process32_tid_addr.at_type = AU_IPv6;
+ sprintf(buf, "%s%s", token_filename, "-IPv6");
+ } else {
+ process32_tid_addr.at_addr[0] = inet_addr("127.0.0.1");
+ process32_tid_addr.at_type = AU_IPv4;
+ sprintf(buf, "%s%s", token_filename, "-IPv4");
+ }
+
+ process32ex_token = au_to_process32_ex(process32_auid, process32_euid,
+ process32_egid, process32_ruid, process32_rgid, process32_pid,
+ process32_sid, &process32_tid_addr);
+ if (process32ex_token == NULL)
+ err(EX_UNAVAILABLE, "au_to_process32_ex");
+ write_token(directory, buf, process32ex_token);
+ free(buf);
+}
+
+static void
+generate_process32ex_record(const char *directory, const char *record_filename,
+ u_int32_t type)
+{
+ token_t *process32ex_token;
+ char *buf;
+
+ buf = (char *)malloc(strlen(record_filename) + 6);
+ if (type == AU_IPv6) {
+ inet_pton(AF_INET6, "fe80::1", process32_tid_addr.at_addr);
+ process32_tid_addr.at_type = AU_IPv6;
+ sprintf(buf, "%s%s", record_filename, "-IPv6");
+ } else {
+ process32_tid_addr.at_addr[0] = inet_addr("127.0.0.1");
+ process32_tid_addr.at_type = AU_IPv4;
+ sprintf(buf, "%s%s", record_filename, "-IPv4");
+ }
+
+ process32ex_token = au_to_process32_ex(process32_auid, process32_euid,
+ process32_egid, process32_ruid, process32_rgid, process32_pid,
+ process32_sid, &process32_tid_addr);
+ if (process32ex_token == NULL)
+ err(EX_UNAVAILABLE, "au_to_process32_ex");
+ write_record(directory, buf, process32ex_token, AUE_NULL);
+ free(buf);
+}
+
+static au_id_t process64_auid = 0x12345678;
+static uid_t process64_euid = 0x01234567;
+static gid_t process64_egid = 0x23456789;
+static uid_t process64_ruid = 0x98765432;
+static gid_t process64_rgid = 0x09876543;
+static pid_t process64_pid = 0x13243546;
+static au_asid_t process64_sid = 0x97867564;
+static au_tid_t process64_tid = { 0x16593746 };
+static au_tid_addr_t process64_tid_addr = { 0x16593746 };
+
+static void
+generate_process64_token(const char *directory, const char *token_filename)
+{
+ token_t *process64_token;
+
+ process64_tid.machine = inet_addr("127.0.0.1");
+
+ process64_token = au_to_process64(process64_auid, process64_euid,
+ process64_egid, process64_ruid, process64_rgid, process64_pid,
+ process64_sid, &process64_tid);
+ if (process64_token == NULL)
+ err(EX_UNAVAILABLE, "au_to_process64");
+ write_token(directory, token_filename, process64_token);
+}
+
+static void
+generate_process64_record(const char *directory, const char *record_filename)
+{
+ token_t *process64_token;
+
+ process64_tid.machine = inet_addr("127.0.0.1");
+
+ process64_token = au_to_process64(process64_auid, process64_euid,
+ process64_egid, process64_ruid, process64_rgid, process64_pid,
+ process64_sid, &process64_tid);
+ if (process64_token == NULL)
+ err(EX_UNAVAILABLE, "au_ti_process64");
+ write_record(directory, record_filename, process64_token, AUE_NULL);
+}
+
+static void
+generate_process64ex_token(const char *directory, const char *token_filename,
+ u_int32_t type)
+{
+ token_t *process64ex_token;
+ char *buf;
+
+ buf = (char *)malloc(strlen(token_filename) + 6);
+ if (type == AU_IPv6) {
+ inet_pton(AF_INET6, "fe80::1", process64_tid_addr.at_addr);
+ process64_tid_addr.at_type = AU_IPv6;
+ sprintf(buf, "%s%s", token_filename, "-IPv6");
+ } else {
+ process64_tid_addr.at_addr[0] = inet_addr("127.0.0.1");
+ process64_tid_addr.at_type = AU_IPv4;
+ sprintf(buf, "%s%s", token_filename, "-IPv4");
+ }
+
+ process64ex_token = au_to_process64_ex(process64_auid, process64_euid,
+ process64_egid, process64_ruid, process64_rgid, process64_pid,
+ process64_sid, &process64_tid_addr);
+ if (process64ex_token == NULL)
+ err(EX_UNAVAILABLE, "au_to_process64_ex");
+ write_token(directory, buf, process64ex_token);
+ free(buf);
+}
+
+static void
+generate_process64ex_record(const char *directory, const char *record_filename,
+ u_int32_t type)
+{
+ token_t *process64ex_token;
+ char *buf;
+
+ buf = (char *)malloc(strlen(record_filename) + 6);
+ if (type == AU_IPv6) {
+ inet_pton(AF_INET6, "fe80::1", process64_tid_addr.at_addr);
+ process64_tid_addr.at_type = AU_IPv6;
+ sprintf(buf, "%s%s", record_filename, "-IPv6");
+ } else {
+ process64_tid_addr.at_addr[0] = inet_addr("127.0.0.1");
+ process64_tid_addr.at_type = AU_IPv4;
+ sprintf(buf, "%s%s", record_filename, "-IPv4");
+ }
+
+ process64ex_token = au_to_process64_ex(process64_auid, process64_euid,
+ process64_egid, process64_ruid, process64_rgid, process64_pid,
+ process64_sid, &process64_tid_addr);
+ if (process64ex_token == NULL)
+ err(EX_UNAVAILABLE, "au_to_process64_ex");
+ write_record(directory, buf, process64ex_token, AUE_NULL);
+ free(buf);
+}
+
+static char return32_status = EINVAL;
+static uint32_t return32_ret = 0x12345678;
+
+static void
+generate_return32_token(const char *directory, const char *token_filename)
+{
+ token_t *return32_token;
+
+ return32_token = au_to_return32(au_errno_to_bsm(return32_status),
+ return32_ret);
+ if (return32_token == NULL)
+ err(EX_UNAVAILABLE, "au_to_return32");
+ write_token(directory, token_filename, return32_token);
+}
+
+static void
+generate_return32_record(const char *directory, const char *record_filename)
+{
+ token_t *return32_token;
+
+ return32_token = au_to_return32(au_errno_to_bsm(return32_status),
+ return32_ret);
+ if (return32_token == NULL)
+ err(EX_UNAVAILABLE, "au_to_return32");
+ write_record(directory, record_filename, return32_token, AUE_NULL);
+}
+
+static char *text_token_text = "This is a test.";
+
+static void
+generate_text_token(const char *directory, const char *token_filename)
+{
+ token_t *text_token;
+
+ text_token = au_to_text(text_token_text);
+ if (text_token == NULL)
+ err(EX_UNAVAILABLE, "au_to_text");
+ write_token(directory, token_filename, text_token);
+}
+
+static void
+generate_text_record(const char *directory, const char *record_filename)
+{
+ token_t *text_token;
+
+ text_token = au_to_text(text_token_text);
+ if (text_token == NULL)
+ err(EX_UNAVAILABLE, "au_to_text");
+ write_record(directory, record_filename, text_token, AUE_NULL);
+}
+
+static char opaque_token_data[] = {0xaa, 0xbb, 0xcc, 0xdd};
+static int opaque_token_bytes = sizeof(opaque_token_data);
+
+static void
+generate_opaque_token(const char *directory, const char *token_filename)
+{
+ token_t *opaque_token;
+
+ opaque_token = au_to_opaque(opaque_token_data, opaque_token_bytes);
+ if (opaque_token == NULL)
+ err(EX_UNAVAILABLE, "au_to_opaque");
+ write_token(directory, token_filename, opaque_token);
+}
+
+static void
+generate_opaque_record(const char *directory, const char *record_filename)
+{
+ token_t *opaque_token;
+
+ opaque_token = au_to_opaque(opaque_token_data, opaque_token_bytes);
+ if (opaque_token == NULL)
+ err(EX_UNAVAILABLE, "au_to_opaque");
+ write_record(directory, record_filename, opaque_token, AUE_NULL);
+}
+
+static struct in_addr in_addr_token_addr;
+
+static void
+generate_in_addr_token(const char *directory, const char *token_filename)
+{
+ token_t *in_addr_token;
+
+ in_addr_token_addr.s_addr = inet_addr("192.168.100.15");
+
+ in_addr_token = au_to_in_addr(&in_addr_token_addr);
+ if (in_addr_token == NULL)
+ err(EX_UNAVAILABLE, "au_to_in_addr");
+ write_token(directory, token_filename, in_addr_token);
+}
+
+static void
+generate_in_addr_record(const char *directory, const char *record_filename)
+{
+ token_t *in_addr_token;
+
+ in_addr_token_addr.s_addr = inet_addr("192.168.100.15");
+
+ in_addr_token = au_to_in_addr(&in_addr_token_addr);
+ if (in_addr_token == NULL)
+ err(EX_UNAVAILABLE, "au_to_in_addr");
+ write_record(directory, record_filename, in_addr_token, AUE_NULL);
+}
+
+static struct ip ip_token_ip;
+static u_char ip_token_ip_v = 4;
+static uint16_t ip_token_ip_id = 0x5478;
+static u_char ip_token_ip_ttl = 64;
+static u_char ip_token_ip_p = IPPROTO_ICMP;
+static struct in_addr ip_token_ip_src;
+static struct in_addr ip_token_ip_dst;
+
+static void
+generate_ip_token(const char *directory, const char *token_filename)
+{
+ token_t *ip_token;
+
+ ip_token_ip_src.s_addr = inet_addr("192.168.100.155");
+ ip_token_ip_dst.s_addr = inet_addr("192.168.110.48");
+
+ memset(&ip_token_ip, 0, sizeof(ip_token_ip));
+ ip_token_ip.ip_v = ip_token_ip_v;
+ ip_token_ip.ip_len = htons(sizeof(ip_token_ip));
+ ip_token_ip.ip_id = htons(ip_token_ip_id);
+ ip_token_ip.ip_ttl = ip_token_ip_ttl;
+ ip_token_ip.ip_p = ip_token_ip_p;
+ ip_token_ip.ip_src = ip_token_ip_src;
+ ip_token_ip.ip_dst = ip_token_ip_dst;
+
+ ip_token = au_to_ip(&ip_token_ip);
+ if (ip_token == NULL)
+ err(EX_UNAVAILABLE, "au_to_ip");
+ write_token(directory, token_filename, ip_token);
+}
+
+static void
+generate_ip_record(const char *directory, const char *record_filename)
+{
+ token_t *ip_token;
+
+ ip_token_ip_src.s_addr = inet_addr("192.168.100.155");
+ ip_token_ip_dst.s_addr = inet_addr("192.168.110.48");
+
+ memset(&ip_token_ip, 0, sizeof(ip_token_ip));
+ ip_token_ip.ip_v = ip_token_ip_v;
+ ip_token_ip.ip_len = htons(sizeof(ip_token_ip));
+ ip_token_ip.ip_id = htons(ip_token_ip_id);
+ ip_token_ip.ip_ttl = ip_token_ip_ttl;
+ ip_token_ip.ip_p = ip_token_ip_p;
+ ip_token_ip.ip_src = ip_token_ip_src;
+ ip_token_ip.ip_dst = ip_token_ip_dst;
+
+ ip_token = au_to_ip(&ip_token_ip);
+ if (ip_token == NULL)
+ err(EX_UNAVAILABLE, "au_to_ip");
+ write_record(directory, record_filename, ip_token, AUE_NULL);
+}
+
+static u_int16_t iport_token_iport;
+
+static void
+generate_iport_token(const char *directory, const char *token_filename)
+{
+ token_t *iport_token;
+
+ iport_token_iport = htons(80);
+
+ iport_token = au_to_iport(iport_token_iport);
+ if (iport_token == NULL)
+ err(EX_UNAVAILABLE, "au_to_iport");
+ write_token(directory, token_filename, iport_token);
+}
+
+static void
+generate_iport_record(const char *directory, const char *record_filename)
+{
+ token_t *iport_token;
+
+ iport_token_iport = htons(80);
+
+ iport_token = au_to_iport(iport_token_iport);
+ if (iport_token == NULL)
+ err(EX_UNAVAILABLE, "au_to_iport");
+ write_record(directory, record_filename, iport_token, AUE_NULL);
+}
+
+static char arg32_token_n = 3;
+static char *arg32_token_text = "test_arg32_token";
+static uint32_t arg32_token_v = 0xabcdef00;
+
+static void
+generate_arg32_token(const char *directory, const char *token_filename)
+{
+ token_t *arg32_token;
+
+ arg32_token = au_to_arg32(arg32_token_n, arg32_token_text,
+ arg32_token_v);
+ if (arg32_token == NULL)
+ err(EX_UNAVAILABLE, "au_to_arg32");
+ write_token(directory, token_filename, arg32_token);
+}
+
+static void
+generate_arg32_record(const char *directory, const char *record_filename)
+{
+ token_t *arg32_token;
+
+ arg32_token = au_to_arg32(arg32_token_n, arg32_token_text,
+ arg32_token_v);
+ if (arg32_token == NULL)
+ err(EX_UNAVAILABLE, "au_to_arg32");
+ write_record(directory, record_filename, arg32_token, AUE_NULL);
+}
+
+static long seq_audit_count = 0x12345678;
+
+static void
+generate_seq_token(const char *directory, const char *token_filename)
+{
+ token_t *seq_token;
+
+ seq_token = au_to_seq(seq_audit_count);
+ if (seq_token == NULL)
+ err(EX_UNAVAILABLE, "au_to_seq");
+ write_token(directory, token_filename, seq_token);
+}
+
+static void
+generate_seq_record(const char *directory, const char *record_filename)
+{
+ token_t *seq_token;
+
+ seq_token = au_to_seq(seq_audit_count);
+ if (seq_token == NULL)
+ err(EX_UNAVAILABLE, "au_to_seq");
+ write_record(directory, record_filename, seq_token, AUE_NULL);
+}
+
+#if 0
+/*
+ * AUT_ACL
+ */
+
+static void
+generate_attr_token(const char *directory, const char *token_filename)
+{
+ token_t *attr_token;
+
+}
+
+static void
+generate_attr_record(const char *directory, const char *record_filename)
+{
+ token_t *attr_token;
+
+}
+
+static void
+generate_ipc_perm_token(const char *directory, const char *token_filename)
+{
+ token_t *ipc_perm_token;
+
+}
+
+static void
+generate_ipc_perm_record(const char *directory, const char *record_filename)
+{
+ token_t *ipc_perm_token;
+
+}
+#endif
+
+#if 0
+/*
+ * AUT_LABEL
+ */
+
+static void
+generate_groups_token(const char *directory, const char *token_filename)
+{
+ token_t *groups_token;
+
+}
+
+static void
+generate_groups_record(const char *directory, const char *record_filename)
+{
+ token_t *groups_token;
+
+}
+#endif
+
+/*
+ * AUT_ILABEL
+ */
+
+/*
+ * AUT_SLABEL
+ */
+
+/*
+ * AUT_CLEAR
+ */
+
+/*
+ * AUT_PRIV
+ */
+
+/*
+ * AUT_UPRIV
+ */
+
+/*
+ * AUT_LIAISON
+ */
+
+/*
+ * AUT_NEWGROUPS
+ */
+
+/*
+ * AUT_EXEC_ARGS
+ */
+
+/*
+ * AUT_EXEC_ENV
+ */
+
+#if 0
+static void
+generate_attr32_token(const char *directory, const char *token_filename)
+{
+ token_t *attr32_token;
+
+}
+
+static void
+generate_attr32_record(const char *directory, const char *record_filename)
+{
+ token_t *attr32_token;
+
+}
+#endif
+
+static char *zonename_sample = "testzone";
+
+static void
+generate_zonename_token(const char *directory, const char *token_filename)
+{
+ token_t *zonename_token;
+
+ zonename_token = au_to_zonename(zonename_sample);
+ if (zonename_token == NULL)
+ err(EX_UNAVAILABLE, "au_to_zonename");
+ write_token(directory, token_filename, zonename_token);
+}
+
+static void
+generate_zonename_record(const char *directory, const char *record_filename)
+{
+ token_t *zonename_token;
+
+ zonename_token = au_to_zonename(zonename_sample);
+ if (zonename_token == NULL)
+ err(EX_UNAVAILABLE, "au_to_zonename");
+ write_record(directory, record_filename, zonename_token, AUE_NULL);
+}
+
+static u_short socketex_domain = PF_INET;
+static u_short socketex_type = SOCK_STREAM;
+static struct sockaddr_in socketex_laddr, socketex_raddr;
+
+static void
+generate_socketex_token(const char *directory, const char *token_filename)
+{
+ token_t *socketex_token;
+
+ bzero(&socketex_laddr, sizeof(socketex_laddr));
+ socketex_laddr.sin_family = AF_INET;
+ socketex_laddr.sin_len = sizeof(socketex_laddr);
+ socketex_laddr.sin_addr.s_addr = htonl(INADDR_LOOPBACK);
+
+ bzero(&socketex_raddr, sizeof(socketex_raddr));
+ socketex_raddr.sin_family = AF_INET;
+ socketex_raddr.sin_len = sizeof(socketex_raddr);
+ socketex_raddr.sin_addr.s_addr = htonl(INADDR_LOOPBACK);
+
+ socketex_token = au_to_socket_ex(au_domain_to_bsm(socketex_domain),
+ au_socket_type_to_bsm(socketex_type),
+ (struct sockaddr *)&socketex_laddr,
+ (struct sockaddr *)&socketex_raddr);
+ if (socketex_token == NULL)
+ err(EX_UNAVAILABLE, "au_to_socket_ex");
+ write_token(directory, token_filename, socketex_token);
+}
+
+static void
+generate_socketex_record(const char *directory, const char *record_filename)
+{
+ token_t *socketex_token;
+
+ bzero(&socketex_laddr, sizeof(socketex_laddr));
+ socketex_laddr.sin_family = AF_INET;
+ socketex_laddr.sin_len = sizeof(socketex_laddr);
+ socketex_laddr.sin_addr.s_addr = htonl(INADDR_LOOPBACK);
+
+ bzero(&socketex_raddr, sizeof(socketex_raddr));
+ socketex_raddr.sin_family = AF_INET;
+ socketex_raddr.sin_len = sizeof(socketex_raddr);
+ socketex_raddr.sin_addr.s_addr = htonl(INADDR_LOOPBACK);
+
+ socketex_token = au_to_socket_ex(au_domain_to_bsm(socketex_domain),
+ au_socket_type_to_bsm(socketex_type),
+ (struct sockaddr *)&socketex_laddr,
+ (struct sockaddr *)&socketex_raddr);
+ if (socketex_token == NULL)
+ err(EX_UNAVAILABLE, "au_to_socket_ex");
+ write_record(directory, record_filename, socketex_token, AUE_NULL);
+}
+
+/*
+ * Generate a series of error-number specific return tokens in records.
+ */
+static void
+generate_error_record(const char *directory, const char *filename, int error)
+{
+ char pathname[PATH_MAX];
+ token_t *return32_token;
+
+ return32_token = au_to_return32(au_errno_to_bsm(error), -1);
+ if (return32_token == NULL)
+ err(EX_UNAVAILABLE, "au_to_return32");
+ (void)snprintf(pathname, PATH_MAX, "%s_record", filename);
+ write_record(directory, pathname, return32_token, AUE_NULL);
+}
+
+/*
+ * Not all the error numbers, just a few present on all platforms for now.
+ */
+const struct {
+ int error_number;
+ const char *error_name;
+} error_list[] = {
+ { EPERM, "EPERM" },
+ { ENOENT, "ENOENT" },
+ { ESRCH, "ESRCH" },
+ { EINTR, "EINTR" },
+ { EIO, "EIO" },
+ { ENXIO, "ENXIO" },
+ { E2BIG, "E2BIG" },
+ { ENOEXEC, "ENOEXEC" },
+ { EBADF, "EBADF" },
+ { ECHILD, "ECHILD" },
+ { EDEADLK, "EDEADLK" },
+ { ENOMEM, "ENOMEM" },
+ { EACCES, "EACCES" },
+ { EFAULT, "EFAULT" },
+ { ENOTBLK, "ENOTBLK" },
+ { EBUSY, "EBUSY" },
+ { EEXIST, "EEXIST" },
+ { EXDEV, "EXDEV" },
+ { ENODEV, "ENODEV" },
+ { ENOTDIR, "ENOTDIR" },
+ { EISDIR, "EISDIR" },
+ { EINVAL, "EINVAL" },
+ { ENFILE, "ENFILE" },
+ { EMFILE, "EMFILE" },
+ { ENOTTY, "ENOTTY" },
+ { ETXTBSY, "ETXTBSY" },
+ { EFBIG, "EFBIG" },
+ { ENOSPC, "ENOSPC" },
+ { ESPIPE, "ESPIPE" },
+ { EROFS, "EROFS" },
+ { EMLINK, "EMLINK" },
+ { EPIPE, "EPIPE" }
+};
+const int error_list_count = sizeof(error_list)/sizeof(error_list[0]);
+
+static void
+do_error_records(const char *directory)
+{
+ int i;
+
+ for (i = 0; i < error_list_count; i++)
+ generate_error_record(directory, error_list[i].error_name,
+ error_list[i].error_number);
+}
+
+int
+main(int argc, char *argv[])
+{
+ const char *directory;
+ int ch;
+
+ while ((ch = getopt(argc, argv, "rt")) != -1) {
+ switch (ch) {
+ case 'r':
+ do_records++;
+ break;
+
+ case 't':
+ do_tokens++;
+ break;
+
+ default:
+ usage();
+ }
+ }
+
+ argc -= optind;
+ argv += optind;
+
+ if (argc != 1)
+ usage();
+
+ directory = argv[0];
+
+ if (mkdir(directory, 0755) < 0 && errno != EEXIST)
+ err(EX_OSERR, "mkdir: %s", directory);
+
+ if (do_tokens) {
+ generate_file_token(directory, "file_token");
+ generate_trailer_token(directory, "trailer_token");
+ generate_header32_token(directory, "header32_token");
+ generate_data_token(directory, "data_token");
+ generate_ipc_token(directory, "ipc_token");
+ generate_path_token(directory, "path_token");
+ generate_subject32_token(directory, "subject32_token");
+ generate_subject32ex_token(directory, "subject32ex_token",
+ AU_IPv4);
+ generate_subject32ex_token(directory, "subject32ex_token",
+ AU_IPv6);
+ generate_process32_token(directory, "process32_token");
+ generate_process32ex_token(directory, "process32ex_token",
+ AU_IPv4);
+ generate_process32ex_token(directory, "process32ex_token",
+ AU_IPv6);
+ generate_process64_token(directory, "process64_token");
+ generate_process64ex_token(directory, "process64ex_token",
+ AU_IPv4);
+ generate_process64ex_token(directory, "process64ex_token",
+ AU_IPv6);
+ generate_return32_token(directory, "return32_token");
+ generate_text_token(directory, "text_token");
+ generate_opaque_token(directory, "opaque_token");
+ generate_in_addr_token(directory, "in_addr_token");
+ generate_ip_token(directory, "ip_token");
+ generate_iport_token(directory, "iport_token");
+ generate_arg32_token(directory, "arg32_token");
+ generate_seq_token(directory, "seq_token");
+#if 0
+ generate_attr_token(directory, "attr_token");
+ generate_ipc_perm_token(directory, "ipc_perm_token");
+ generate_groups_token(directory, "groups_token");
+ generate_attr32_token(directory, "attr32_token");
+#endif
+ generate_zonename_token(directory, "zonename_token");
+ generate_socketex_token(directory, "socketex_token");
+ }
+
+ if (do_records) {
+ generate_file_record(directory, "file_record");
+ generate_data_record(directory, "data_record");
+ generate_ipc_record(directory, "ipc_record");
+ generate_path_record(directory, "path_record");
+ generate_subject32_record(directory, "subject32_record");
+ generate_subject32ex_record(directory, "subject32ex_record",
+ AU_IPv4);
+ generate_subject32ex_record(directory, "subject32ex_record",
+ AU_IPv6);
+ generate_process32_record(directory, "process32_record");
+ generate_process32ex_record(directory, "process32ex_record",
+ AU_IPv4);
+ generate_process32ex_record(directory, "process32ex_record",
+ AU_IPv6);
+ generate_process64_record(directory, "process64_record");
+ generate_process64ex_record(directory, "process64ex_record",
+ AU_IPv4);
+ generate_process64ex_record(directory, "process64ex_record",
+ AU_IPv6);
+ generate_return32_record(directory, "return32_record");
+ generate_text_record(directory, "text_record");
+ generate_opaque_record(directory, "opaque_record");
+ generate_in_addr_record(directory, "in_addr_record");
+ generate_ip_record(directory, "ip_record");
+ generate_iport_record(directory, "iport_record");
+ generate_arg32_record(directory, "arg32_record");
+ generate_seq_record(directory, "seq_record");
+#if 0
+ generate_attr_record(directory, "attr_record");
+ generate_ipc_perm_record(directory, "ipc_perm_record");
+ generate_groups_record(directory, "groups_record");
+ generate_attr32_record(directory, "attr32_record");
+#endif
+ generate_zonename_record(directory, "zonename_record");
+ generate_socketex_record(directory, "socketex_record");
+ do_error_records(directory);
+ }
+
+ return (0);
+}
Copied: vendor/openbsm/1.2_alpha4/test/reference/E2BIG_record (from rev 11163, vendor/openbsm/dist/test/reference/E2BIG_record)
===================================================================
(Binary files differ)
Copied: vendor/openbsm/1.2_alpha4/test/reference/EACCES_record (from rev 11163, vendor/openbsm/dist/test/reference/EACCES_record)
===================================================================
(Binary files differ)
Copied: vendor/openbsm/1.2_alpha4/test/reference/EBADF_record (from rev 11163, vendor/openbsm/dist/test/reference/EBADF_record)
===================================================================
(Binary files differ)
Copied: vendor/openbsm/1.2_alpha4/test/reference/EBUSY_record (from rev 11163, vendor/openbsm/dist/test/reference/EBUSY_record)
===================================================================
(Binary files differ)
Copied: vendor/openbsm/1.2_alpha4/test/reference/ECHILD_record (from rev 11163, vendor/openbsm/dist/test/reference/ECHILD_record)
===================================================================
(Binary files differ)
Copied: vendor/openbsm/1.2_alpha4/test/reference/EDEADLK_record (from rev 11163, vendor/openbsm/dist/test/reference/EDEADLK_record)
===================================================================
(Binary files differ)
Copied: vendor/openbsm/1.2_alpha4/test/reference/EEXIST_record (from rev 11163, vendor/openbsm/dist/test/reference/EEXIST_record)
===================================================================
(Binary files differ)
Copied: vendor/openbsm/1.2_alpha4/test/reference/EFAULT_record (from rev 11163, vendor/openbsm/dist/test/reference/EFAULT_record)
===================================================================
(Binary files differ)
Copied: vendor/openbsm/1.2_alpha4/test/reference/EFBIG_record (from rev 11163, vendor/openbsm/dist/test/reference/EFBIG_record)
===================================================================
(Binary files differ)
Copied: vendor/openbsm/1.2_alpha4/test/reference/EINTR_record (from rev 11163, vendor/openbsm/dist/test/reference/EINTR_record)
===================================================================
(Binary files differ)
Copied: vendor/openbsm/1.2_alpha4/test/reference/EINVAL_record (from rev 11163, vendor/openbsm/dist/test/reference/EINVAL_record)
===================================================================
(Binary files differ)
Copied: vendor/openbsm/1.2_alpha4/test/reference/EIO_record (from rev 11163, vendor/openbsm/dist/test/reference/EIO_record)
===================================================================
(Binary files differ)
Copied: vendor/openbsm/1.2_alpha4/test/reference/EISDIR_record (from rev 11163, vendor/openbsm/dist/test/reference/EISDIR_record)
===================================================================
(Binary files differ)
Copied: vendor/openbsm/1.2_alpha4/test/reference/EMFILE_record (from rev 11163, vendor/openbsm/dist/test/reference/EMFILE_record)
===================================================================
(Binary files differ)
Copied: vendor/openbsm/1.2_alpha4/test/reference/EMLINK_record (from rev 11163, vendor/openbsm/dist/test/reference/EMLINK_record)
===================================================================
(Binary files differ)
Copied: vendor/openbsm/1.2_alpha4/test/reference/ENFILE_record (from rev 11163, vendor/openbsm/dist/test/reference/ENFILE_record)
===================================================================
(Binary files differ)
Copied: vendor/openbsm/1.2_alpha4/test/reference/ENODEV_record (from rev 11163, vendor/openbsm/dist/test/reference/ENODEV_record)
===================================================================
(Binary files differ)
Copied: vendor/openbsm/1.2_alpha4/test/reference/ENOENT_record (from rev 11163, vendor/openbsm/dist/test/reference/ENOENT_record)
===================================================================
(Binary files differ)
Copied: vendor/openbsm/1.2_alpha4/test/reference/ENOEXEC_record (from rev 11163, vendor/openbsm/dist/test/reference/ENOEXEC_record)
===================================================================
(Binary files differ)
Copied: vendor/openbsm/1.2_alpha4/test/reference/ENOMEM_record (from rev 11163, vendor/openbsm/dist/test/reference/ENOMEM_record)
===================================================================
(Binary files differ)
Copied: vendor/openbsm/1.2_alpha4/test/reference/ENOSPC_record (from rev 11163, vendor/openbsm/dist/test/reference/ENOSPC_record)
===================================================================
(Binary files differ)
Copied: vendor/openbsm/1.2_alpha4/test/reference/ENOTBLK_record (from rev 11163, vendor/openbsm/dist/test/reference/ENOTBLK_record)
===================================================================
(Binary files differ)
Copied: vendor/openbsm/1.2_alpha4/test/reference/ENOTDIR_record (from rev 11163, vendor/openbsm/dist/test/reference/ENOTDIR_record)
===================================================================
(Binary files differ)
Copied: vendor/openbsm/1.2_alpha4/test/reference/ENOTTY_record (from rev 11163, vendor/openbsm/dist/test/reference/ENOTTY_record)
===================================================================
(Binary files differ)
Copied: vendor/openbsm/1.2_alpha4/test/reference/ENXIO_record (from rev 11163, vendor/openbsm/dist/test/reference/ENXIO_record)
===================================================================
(Binary files differ)
Copied: vendor/openbsm/1.2_alpha4/test/reference/EPERM_record (from rev 11163, vendor/openbsm/dist/test/reference/EPERM_record)
===================================================================
(Binary files differ)
Copied: vendor/openbsm/1.2_alpha4/test/reference/EPIPE_record (from rev 11163, vendor/openbsm/dist/test/reference/EPIPE_record)
===================================================================
(Binary files differ)
Copied: vendor/openbsm/1.2_alpha4/test/reference/EROFS_record (from rev 11163, vendor/openbsm/dist/test/reference/EROFS_record)
===================================================================
(Binary files differ)
Copied: vendor/openbsm/1.2_alpha4/test/reference/ESPIPE_record (from rev 11163, vendor/openbsm/dist/test/reference/ESPIPE_record)
===================================================================
(Binary files differ)
Copied: vendor/openbsm/1.2_alpha4/test/reference/ESRCH_record (from rev 11163, vendor/openbsm/dist/test/reference/ESRCH_record)
===================================================================
(Binary files differ)
Copied: vendor/openbsm/1.2_alpha4/test/reference/ETXTBSY_record (from rev 11163, vendor/openbsm/dist/test/reference/ETXTBSY_record)
===================================================================
(Binary files differ)
Copied: vendor/openbsm/1.2_alpha4/test/reference/EXDEV_record (from rev 11163, vendor/openbsm/dist/test/reference/EXDEV_record)
===================================================================
(Binary files differ)
Deleted: vendor/openbsm/1.2_alpha4/test/reference/arg32_record
===================================================================
--- vendor/openbsm/dist/test/reference/arg32_record 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/test/reference/arg32_record 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,2 +0,0 @@
- 2
- F#n\xAD -\xAB\xCD\xEF test_arg32_token \xB1 2
\ No newline at end of file
Copied: vendor/openbsm/1.2_alpha4/test/reference/arg32_record (from rev 11163, vendor/openbsm/dist/test/reference/arg32_record)
===================================================================
(Binary files differ)
Deleted: vendor/openbsm/1.2_alpha4/test/reference/arg32_token
===================================================================
--- vendor/openbsm/dist/test/reference/arg32_token 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/test/reference/arg32_token 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1 +0,0 @@
--\xAB\xCD\xEF test_arg32_token
\ No newline at end of file
Copied: vendor/openbsm/1.2_alpha4/test/reference/arg32_token (from rev 11163, vendor/openbsm/dist/test/reference/arg32_token)
===================================================================
(Binary files differ)
Deleted: vendor/openbsm/1.2_alpha4/test/reference/data_record
===================================================================
--- vendor/openbsm/dist/test/reference/data_record 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/test/reference/data_record 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,3 +0,0 @@
- '
- F#n\xAD !
-SomeData /\xB1 '
\ No newline at end of file
Copied: vendor/openbsm/1.2_alpha4/test/reference/data_record (from rev 11163, vendor/openbsm/dist/test/reference/data_record)
===================================================================
(Binary files differ)
Deleted: vendor/openbsm/1.2_alpha4/test/reference/data_token
===================================================================
--- vendor/openbsm/dist/test/reference/data_token 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/test/reference/data_token 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,2 +0,0 @@
-!
-SomeData /
\ No newline at end of file
Copied: vendor/openbsm/1.2_alpha4/test/reference/data_token (from rev 11163, vendor/openbsm/dist/test/reference/data_token)
===================================================================
(Binary files differ)
Deleted: vendor/openbsm/1.2_alpha4/test/reference/file_record
===================================================================
--- vendor/openbsm/dist/test/reference/file_record 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/test/reference/file_record 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,2 +0,0 @@
- )
- F#n\xAD #E \xA8 test \xB1 )
\ No newline at end of file
Copied: vendor/openbsm/1.2_alpha4/test/reference/file_record (from rev 11163, vendor/openbsm/dist/test/reference/file_record)
===================================================================
(Binary files differ)
Deleted: vendor/openbsm/1.2_alpha4/test/reference/file_token
===================================================================
--- vendor/openbsm/dist/test/reference/file_token 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/test/reference/file_token 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1 +0,0 @@
- #E \xA8 test
\ No newline at end of file
Copied: vendor/openbsm/1.2_alpha4/test/reference/file_token (from rev 11163, vendor/openbsm/dist/test/reference/file_token)
===================================================================
(Binary files differ)
Deleted: vendor/openbsm/1.2_alpha4/test/reference/header32_token
===================================================================
--- vendor/openbsm/dist/test/reference/header32_token 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/test/reference/header32_token 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,2 +0,0 @@
-4Vx
- Eg #E \xA8
\ No newline at end of file
Copied: vendor/openbsm/1.2_alpha4/test/reference/header32_token (from rev 11163, vendor/openbsm/dist/test/reference/header32_token)
===================================================================
(Binary files differ)
Deleted: vendor/openbsm/1.2_alpha4/test/reference/in_addr_record
===================================================================
--- vendor/openbsm/dist/test/reference/in_addr_record 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/test/reference/in_addr_record 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,2 +0,0 @@
-
- F#n\xAD *\xC0\xA8d\xB1
\ No newline at end of file
Copied: vendor/openbsm/1.2_alpha4/test/reference/in_addr_record (from rev 11163, vendor/openbsm/dist/test/reference/in_addr_record)
===================================================================
(Binary files differ)
Deleted: vendor/openbsm/1.2_alpha4/test/reference/in_addr_token
===================================================================
--- vendor/openbsm/dist/test/reference/in_addr_token 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/test/reference/in_addr_token 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1 +0,0 @@
-*\xC0\xA8d
\ No newline at end of file
Copied: vendor/openbsm/1.2_alpha4/test/reference/in_addr_token (from rev 11163, vendor/openbsm/dist/test/reference/in_addr_token)
===================================================================
(Binary files differ)
Deleted: vendor/openbsm/1.2_alpha4/test/reference/ip_record
===================================================================
--- vendor/openbsm/dist/test/reference/ip_record 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/test/reference/ip_record 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,2 +0,0 @@
- .
- F#n\xAD +@ Tx @ \xC0\xA8d\x9B\xC0\xA8n0\xB1 .
\ No newline at end of file
Copied: vendor/openbsm/1.2_alpha4/test/reference/ip_record (from rev 11163, vendor/openbsm/dist/test/reference/ip_record)
===================================================================
(Binary files differ)
Deleted: vendor/openbsm/1.2_alpha4/test/reference/ip_token
===================================================================
--- vendor/openbsm/dist/test/reference/ip_token 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/test/reference/ip_token 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1 +0,0 @@
-+@ Tx @ \xC0\xA8d\x9B\xC0\xA8n0
\ No newline at end of file
Copied: vendor/openbsm/1.2_alpha4/test/reference/ip_token (from rev 11163, vendor/openbsm/dist/test/reference/ip_token)
===================================================================
(Binary files differ)
Deleted: vendor/openbsm/1.2_alpha4/test/reference/ipc_record
===================================================================
--- vendor/openbsm/dist/test/reference/ipc_record 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/test/reference/ipc_record 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,2 +0,0 @@
-
- F#n\xAD "4Vx\xB1
\ No newline at end of file
Copied: vendor/openbsm/1.2_alpha4/test/reference/ipc_record (from rev 11163, vendor/openbsm/dist/test/reference/ipc_record)
===================================================================
(Binary files differ)
Deleted: vendor/openbsm/1.2_alpha4/test/reference/ipc_token
===================================================================
--- vendor/openbsm/dist/test/reference/ipc_token 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/test/reference/ipc_token 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1 +0,0 @@
-"4Vx
\ No newline at end of file
Copied: vendor/openbsm/1.2_alpha4/test/reference/ipc_token (from rev 11163, vendor/openbsm/dist/test/reference/ipc_token)
===================================================================
(Binary files differ)
Deleted: vendor/openbsm/1.2_alpha4/test/reference/iport_record
===================================================================
--- vendor/openbsm/dist/test/reference/iport_record 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/test/reference/iport_record 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,2 +0,0 @@
-
- F#n\xAD ,P \xB1
\ No newline at end of file
Copied: vendor/openbsm/1.2_alpha4/test/reference/iport_record (from rev 11163, vendor/openbsm/dist/test/reference/iport_record)
===================================================================
(Binary files differ)
Deleted: vendor/openbsm/1.2_alpha4/test/reference/iport_token
===================================================================
--- vendor/openbsm/dist/test/reference/iport_token 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/test/reference/iport_token 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1 +0,0 @@
-,P
\ No newline at end of file
Copied: vendor/openbsm/1.2_alpha4/test/reference/iport_token (from rev 11163, vendor/openbsm/dist/test/reference/iport_token)
===================================================================
(Binary files differ)
Deleted: vendor/openbsm/1.2_alpha4/test/reference/opaque_record
===================================================================
--- vendor/openbsm/dist/test/reference/opaque_record 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/test/reference/opaque_record 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,2 +0,0 @@
-
- F#n\xAD ) \xAA\xBB\xCC\xDD\xB1
\ No newline at end of file
Copied: vendor/openbsm/1.2_alpha4/test/reference/opaque_record (from rev 11163, vendor/openbsm/dist/test/reference/opaque_record)
===================================================================
(Binary files differ)
Deleted: vendor/openbsm/1.2_alpha4/test/reference/opaque_token
===================================================================
--- vendor/openbsm/dist/test/reference/opaque_token 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/test/reference/opaque_token 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1 +0,0 @@
-) \xAA\xBB\xCC\xDD
\ No newline at end of file
Copied: vendor/openbsm/1.2_alpha4/test/reference/opaque_token (from rev 11163, vendor/openbsm/dist/test/reference/opaque_token)
===================================================================
(Binary files differ)
Deleted: vendor/openbsm/1.2_alpha4/test/reference/path_record
===================================================================
--- vendor/openbsm/dist/test/reference/path_record 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/test/reference/path_record 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,2 +0,0 @@
- 1
- F#n\xAD # /test/this/is/a/test \xB1 1
\ No newline at end of file
Copied: vendor/openbsm/1.2_alpha4/test/reference/path_record (from rev 11163, vendor/openbsm/dist/test/reference/path_record)
===================================================================
(Binary files differ)
Deleted: vendor/openbsm/1.2_alpha4/test/reference/path_token
===================================================================
--- vendor/openbsm/dist/test/reference/path_token 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/test/reference/path_token 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1 +0,0 @@
-# /test/this/is/a/test
\ No newline at end of file
Copied: vendor/openbsm/1.2_alpha4/test/reference/path_token (from rev 11163, vendor/openbsm/dist/test/reference/path_token)
===================================================================
(Binary files differ)
Deleted: vendor/openbsm/1.2_alpha4/test/reference/process32_record
===================================================================
--- vendor/openbsm/dist/test/reference/process32_record 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/test/reference/process32_record 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,2 +0,0 @@
- >
- F#n\xAD &4Vx#Eg#Eg\x89\x98vT2 \x87eC$5F\x97\x86udY7F \xB1 >
\ No newline at end of file
Copied: vendor/openbsm/1.2_alpha4/test/reference/process32_record (from rev 11163, vendor/openbsm/dist/test/reference/process32_record)
===================================================================
(Binary files differ)
Deleted: vendor/openbsm/1.2_alpha4/test/reference/process32_token
===================================================================
--- vendor/openbsm/dist/test/reference/process32_token 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/test/reference/process32_token 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1 +0,0 @@
-&4Vx#Eg#Eg\x89\x98vT2 \x87eC$5F\x97\x86udY7F
\ No newline at end of file
Copied: vendor/openbsm/1.2_alpha4/test/reference/process32_token (from rev 11163, vendor/openbsm/dist/test/reference/process32_token)
===================================================================
(Binary files differ)
Deleted: vendor/openbsm/1.2_alpha4/test/reference/process32ex_record-IPv4
===================================================================
--- vendor/openbsm/dist/test/reference/process32ex_record-IPv4 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/test/reference/process32ex_record-IPv4 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,2 +0,0 @@
- B
- F#n\xAD {4Vx#Eg#Eg\x89\x98vT2 \x87eC$5F\x97\x86udY7F \xB1 B
\ No newline at end of file
Copied: vendor/openbsm/1.2_alpha4/test/reference/process32ex_record-IPv4 (from rev 11163, vendor/openbsm/dist/test/reference/process32ex_record-IPv4)
===================================================================
(Binary files differ)
Deleted: vendor/openbsm/1.2_alpha4/test/reference/process32ex_record-IPv6
===================================================================
--- vendor/openbsm/dist/test/reference/process32ex_record-IPv6 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/test/reference/process32ex_record-IPv6 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,2 +0,0 @@
- N
- F#n\xAD {4Vx#Eg#Eg\x89\x98vT2 \x87eC$5F\x97\x86udY7F \xFE\x80 \xB1 N
\ No newline at end of file
Copied: vendor/openbsm/1.2_alpha4/test/reference/process32ex_record-IPv6 (from rev 11163, vendor/openbsm/dist/test/reference/process32ex_record-IPv6)
===================================================================
(Binary files differ)
Deleted: vendor/openbsm/1.2_alpha4/test/reference/process32ex_token-IPv4
===================================================================
--- vendor/openbsm/dist/test/reference/process32ex_token-IPv4 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/test/reference/process32ex_token-IPv4 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1 +0,0 @@
-{4Vx#Eg#Eg\x89\x98vT2 \x87eC$5F\x97\x86udY7F
\ No newline at end of file
Copied: vendor/openbsm/1.2_alpha4/test/reference/process32ex_token-IPv4 (from rev 11163, vendor/openbsm/dist/test/reference/process32ex_token-IPv4)
===================================================================
(Binary files differ)
Deleted: vendor/openbsm/1.2_alpha4/test/reference/process32ex_token-IPv6
===================================================================
--- vendor/openbsm/dist/test/reference/process32ex_token-IPv6 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/test/reference/process32ex_token-IPv6 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1 +0,0 @@
-{4Vx#Eg#Eg\x89\x98vT2 \x87eC$5F\x97\x86udY7F \xFE\x80
\ No newline at end of file
Copied: vendor/openbsm/1.2_alpha4/test/reference/process32ex_token-IPv6 (from rev 11163, vendor/openbsm/dist/test/reference/process32ex_token-IPv6)
===================================================================
(Binary files differ)
Deleted: vendor/openbsm/1.2_alpha4/test/reference/process64_record
===================================================================
--- vendor/openbsm/dist/test/reference/process64_record 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/test/reference/process64_record 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,2 +0,0 @@
- B
- F#n\xAD w4Vx#Eg#Eg\x89\x98vT2 \x87eC$5F\x97\x86ud Y7F \xB1 B
\ No newline at end of file
Copied: vendor/openbsm/1.2_alpha4/test/reference/process64_record (from rev 11163, vendor/openbsm/dist/test/reference/process64_record)
===================================================================
(Binary files differ)
Deleted: vendor/openbsm/1.2_alpha4/test/reference/process64_token
===================================================================
--- vendor/openbsm/dist/test/reference/process64_token 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/test/reference/process64_token 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1 +0,0 @@
-w4Vx#Eg#Eg\x89\x98vT2 \x87eC$5F\x97\x86ud Y7F
\ No newline at end of file
Copied: vendor/openbsm/1.2_alpha4/test/reference/process64_token (from rev 11163, vendor/openbsm/dist/test/reference/process64_token)
===================================================================
(Binary files differ)
Deleted: vendor/openbsm/1.2_alpha4/test/reference/process64ex_record-IPv4
===================================================================
--- vendor/openbsm/dist/test/reference/process64ex_record-IPv4 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/test/reference/process64ex_record-IPv4 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,2 +0,0 @@
- F
- F#n\xAD }4Vx#Eg#Eg\x89\x98vT2 \x87eC$5F\x97\x86ud Y7F \xB1 F
\ No newline at end of file
Copied: vendor/openbsm/1.2_alpha4/test/reference/process64ex_record-IPv4 (from rev 11163, vendor/openbsm/dist/test/reference/process64ex_record-IPv4)
===================================================================
(Binary files differ)
Deleted: vendor/openbsm/1.2_alpha4/test/reference/process64ex_record-IPv6
===================================================================
--- vendor/openbsm/dist/test/reference/process64ex_record-IPv6 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/test/reference/process64ex_record-IPv6 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,2 +0,0 @@
- R
- F#n\xAD }4Vx#Eg#Eg\x89\x98vT2 \x87eC$5F\x97\x86ud Y7F \xFE\x80 \xB1 R
\ No newline at end of file
Copied: vendor/openbsm/1.2_alpha4/test/reference/process64ex_record-IPv6 (from rev 11163, vendor/openbsm/dist/test/reference/process64ex_record-IPv6)
===================================================================
(Binary files differ)
Deleted: vendor/openbsm/1.2_alpha4/test/reference/process64ex_token-IPv4
===================================================================
--- vendor/openbsm/dist/test/reference/process64ex_token-IPv4 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/test/reference/process64ex_token-IPv4 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1 +0,0 @@
-}4Vx#Eg#Eg\x89\x98vT2 \x87eC$5F\x97\x86ud Y7F
\ No newline at end of file
Copied: vendor/openbsm/1.2_alpha4/test/reference/process64ex_token-IPv4 (from rev 11163, vendor/openbsm/dist/test/reference/process64ex_token-IPv4)
===================================================================
(Binary files differ)
Deleted: vendor/openbsm/1.2_alpha4/test/reference/process64ex_token-IPv6
===================================================================
--- vendor/openbsm/dist/test/reference/process64ex_token-IPv6 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/test/reference/process64ex_token-IPv6 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1 +0,0 @@
-}4Vx#Eg#Eg\x89\x98vT2 \x87eC$5F\x97\x86ud Y7F \xFE\x80
\ No newline at end of file
Copied: vendor/openbsm/1.2_alpha4/test/reference/process64ex_token-IPv6 (from rev 11163, vendor/openbsm/dist/test/reference/process64ex_token-IPv6)
===================================================================
(Binary files differ)
Deleted: vendor/openbsm/1.2_alpha4/test/reference/return32_record
===================================================================
--- vendor/openbsm/dist/test/reference/return32_record 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/test/reference/return32_record 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,2 +0,0 @@
-
- F#n\xAD '\xD74Vx\xB1
\ No newline at end of file
Copied: vendor/openbsm/1.2_alpha4/test/reference/return32_record (from rev 11163, vendor/openbsm/dist/test/reference/return32_record)
===================================================================
(Binary files differ)
Deleted: vendor/openbsm/1.2_alpha4/test/reference/return32_token
===================================================================
--- vendor/openbsm/dist/test/reference/return32_token 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/test/reference/return32_token 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1 +0,0 @@
-'\xD74Vx
\ No newline at end of file
Copied: vendor/openbsm/1.2_alpha4/test/reference/return32_token (from rev 11163, vendor/openbsm/dist/test/reference/return32_token)
===================================================================
(Binary files differ)
Deleted: vendor/openbsm/1.2_alpha4/test/reference/seq_record
===================================================================
--- vendor/openbsm/dist/test/reference/seq_record 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/test/reference/seq_record 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,2 +0,0 @@
-
- F#n\xAD /4Vx\xB1
\ No newline at end of file
Copied: vendor/openbsm/1.2_alpha4/test/reference/seq_record (from rev 11163, vendor/openbsm/dist/test/reference/seq_record)
===================================================================
(Binary files differ)
Deleted: vendor/openbsm/1.2_alpha4/test/reference/seq_token
===================================================================
--- vendor/openbsm/dist/test/reference/seq_token 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/test/reference/seq_token 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1 +0,0 @@
-/4Vx
\ No newline at end of file
Copied: vendor/openbsm/1.2_alpha4/test/reference/seq_token (from rev 11163, vendor/openbsm/dist/test/reference/seq_token)
===================================================================
(Binary files differ)
Copied: vendor/openbsm/1.2_alpha4/test/reference/socketex_record (from rev 11163, vendor/openbsm/dist/test/reference/socketex_record)
===================================================================
(Binary files differ)
Copied: vendor/openbsm/1.2_alpha4/test/reference/socketex_token (from rev 11163, vendor/openbsm/dist/test/reference/socketex_token)
===================================================================
(Binary files differ)
Deleted: vendor/openbsm/1.2_alpha4/test/reference/subject32_record
===================================================================
--- vendor/openbsm/dist/test/reference/subject32_record 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/test/reference/subject32_record 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,2 +0,0 @@
- >
- F#n\xAD $4Vx#Eg#Eg\x89\x98vT2 \x87eC$5F\x97\x86udY7F \xB1 >
\ No newline at end of file
Copied: vendor/openbsm/1.2_alpha4/test/reference/subject32_record (from rev 11163, vendor/openbsm/dist/test/reference/subject32_record)
===================================================================
(Binary files differ)
Deleted: vendor/openbsm/1.2_alpha4/test/reference/subject32_token
===================================================================
--- vendor/openbsm/dist/test/reference/subject32_token 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/test/reference/subject32_token 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1 +0,0 @@
-$4Vx#Eg#Eg\x89\x98vT2 \x87eC$5F\x97\x86udY7F
\ No newline at end of file
Copied: vendor/openbsm/1.2_alpha4/test/reference/subject32_token (from rev 11163, vendor/openbsm/dist/test/reference/subject32_token)
===================================================================
(Binary files differ)
Deleted: vendor/openbsm/1.2_alpha4/test/reference/subject32ex_record
===================================================================
--- vendor/openbsm/dist/test/reference/subject32ex_record 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/test/reference/subject32ex_record 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,2 +0,0 @@
- N
- F#n\xAD z4Vx#Eg#Eg\x89\x98vT2 \x87eC$5F\x97\x86udY7F \xFE\x80 \xB1 N
\ No newline at end of file
Copied: vendor/openbsm/1.2_alpha4/test/reference/subject32ex_record (from rev 11163, vendor/openbsm/dist/test/reference/subject32ex_record)
===================================================================
(Binary files differ)
Deleted: vendor/openbsm/1.2_alpha4/test/reference/subject32ex_token-IPv4
===================================================================
--- vendor/openbsm/dist/test/reference/subject32ex_token-IPv4 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/test/reference/subject32ex_token-IPv4 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1 +0,0 @@
-z4Vx#Eg#Eg\x89\x98vT2 \x87eC$5F\x97\x86udY7F
\ No newline at end of file
Copied: vendor/openbsm/1.2_alpha4/test/reference/subject32ex_token-IPv4 (from rev 11163, vendor/openbsm/dist/test/reference/subject32ex_token-IPv4)
===================================================================
(Binary files differ)
Deleted: vendor/openbsm/1.2_alpha4/test/reference/subject32ex_token-IPv6
===================================================================
--- vendor/openbsm/dist/test/reference/subject32ex_token-IPv6 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/test/reference/subject32ex_token-IPv6 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1 +0,0 @@
-z4Vx#Eg#Eg\x89\x98vT2 \x87eC$5F\x97\x86udY7F \xFE\x80
\ No newline at end of file
Copied: vendor/openbsm/1.2_alpha4/test/reference/subject32ex_token-IPv6 (from rev 11163, vendor/openbsm/dist/test/reference/subject32ex_token-IPv6)
===================================================================
(Binary files differ)
Deleted: vendor/openbsm/1.2_alpha4/test/reference/text_record
===================================================================
--- vendor/openbsm/dist/test/reference/text_record 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/test/reference/text_record 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,2 +0,0 @@
- ,
- F#n\xAD ( This is a test. \xB1 ,
\ No newline at end of file
Copied: vendor/openbsm/1.2_alpha4/test/reference/text_record (from rev 11163, vendor/openbsm/dist/test/reference/text_record)
===================================================================
(Binary files differ)
Deleted: vendor/openbsm/1.2_alpha4/test/reference/text_token
===================================================================
--- vendor/openbsm/dist/test/reference/text_token 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/test/reference/text_token 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1 +0,0 @@
-( This is a test.
\ No newline at end of file
Copied: vendor/openbsm/1.2_alpha4/test/reference/text_token (from rev 11163, vendor/openbsm/dist/test/reference/text_token)
===================================================================
(Binary files differ)
Deleted: vendor/openbsm/1.2_alpha4/test/reference/trailer_token
===================================================================
--- vendor/openbsm/dist/test/reference/trailer_token 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/test/reference/trailer_token 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1 +0,0 @@
-\xB14Vx
\ No newline at end of file
Copied: vendor/openbsm/1.2_alpha4/test/reference/trailer_token (from rev 11163, vendor/openbsm/dist/test/reference/trailer_token)
===================================================================
(Binary files differ)
Deleted: vendor/openbsm/1.2_alpha4/test/reference/zonename_record
===================================================================
--- vendor/openbsm/dist/test/reference/zonename_record 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/test/reference/zonename_record 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,2 +0,0 @@
- %
- F#n\xAD ` testzone \xB1 %
\ No newline at end of file
Copied: vendor/openbsm/1.2_alpha4/test/reference/zonename_record (from rev 11163, vendor/openbsm/dist/test/reference/zonename_record)
===================================================================
(Binary files differ)
Deleted: vendor/openbsm/1.2_alpha4/test/reference/zonename_token
===================================================================
--- vendor/openbsm/dist/test/reference/zonename_token 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/test/reference/zonename_token 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1 +0,0 @@
-` testzone
\ No newline at end of file
Copied: vendor/openbsm/1.2_alpha4/test/reference/zonename_token (from rev 11163, vendor/openbsm/dist/test/reference/zonename_token)
===================================================================
(Binary files differ)
Deleted: vendor/openbsm/1.2_alpha4/tools/Makefile.am
===================================================================
--- vendor/openbsm/dist/tools/Makefile.am 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/tools/Makefile.am 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,9 +0,0 @@
-#
-# $P4: //depot/projects/trustedbsd/openbsm/tools/Makefile.am#2 $
-#
-
-INCLUDES = -I$(top_srcdir)
-
-bin_PROGRAMS = audump
-audump_SOURCES = audump.c
-audump_LDADD = $(top_builddir)/libbsm/libbsm.la
Copied: vendor/openbsm/1.2_alpha4/tools/Makefile.am (from rev 11163, vendor/openbsm/dist/tools/Makefile.am)
===================================================================
--- vendor/openbsm/1.2_alpha4/tools/Makefile.am (rev 0)
+++ vendor/openbsm/1.2_alpha4/tools/Makefile.am 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,9 @@
+if USE_NATIVE_INCLUDES
+INCLUDES = -I$(top_builddir) -I$(top_srcdir)
+else
+INCLUDES = -I$(top_builddir) -I$(top_srcdir) -I$(top_srcdir)/sys
+endif
+
+bin_PROGRAMS = audump
+audump_SOURCES = audump.c
+audump_LDADD = $(top_builddir)/libbsm/libbsm.la
Deleted: vendor/openbsm/1.2_alpha4/tools/Makefile.in
===================================================================
--- vendor/openbsm/dist/tools/Makefile.in 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/tools/Makefile.in 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,463 +0,0 @@
-# Makefile.in generated by automake 1.10 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
- at SET_MAKE@
-
-#
-# $P4: //depot/projects/trustedbsd/openbsm/tools/Makefile.in#5 $
-#
-
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-bin_PROGRAMS = audump$(EXEEXT)
-subdir = tools
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/config/config.h
-CONFIG_CLEAN_FILES =
-am__installdirs = "$(DESTDIR)$(bindir)"
-binPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
-PROGRAMS = $(bin_PROGRAMS)
-am_audump_OBJECTS = audump.$(OBJEXT)
-audump_OBJECTS = $(am_audump_OBJECTS)
-audump_DEPENDENCIES = $(top_builddir)/libbsm/libbsm.la
-DEFAULT_INCLUDES = -I. -I$(top_builddir)/config at am__isrc@
-depcomp = $(SHELL) $(top_srcdir)/config/depcomp
-am__depfiles_maybe = depfiles
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
- $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
- --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
- $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
- --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
- $(LDFLAGS) -o $@
-SOURCES = $(audump_SOURCES)
-DIST_SOURCES = $(audump_SOURCES)
-ETAGS = etags
-CTAGS = ctags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AMTAR = @AMTAR@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO = @ECHO@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-F77 = @F77@
-FFLAGS = @FFLAGS@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-VERSION = @VERSION@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-INCLUDES = -I$(top_srcdir)
-audump_SOURCES = audump.c
-audump_LDADD = $(top_builddir)/libbsm/libbsm.la
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .c .lo .o .obj
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
- && exit 0; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign tools/Makefile'; \
- cd $(top_srcdir) && \
- $(AUTOMAKE) --foreign tools/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-install-binPROGRAMS: $(bin_PROGRAMS)
- @$(NORMAL_INSTALL)
- test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
- @list='$(bin_PROGRAMS)'; for p in $$list; do \
- p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
- if test -f $$p \
- || test -f $$p1 \
- ; then \
- f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
- echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(bindir)/$$f'"; \
- $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(bindir)/$$f" || exit 1; \
- else :; fi; \
- done
-
-uninstall-binPROGRAMS:
- @$(NORMAL_UNINSTALL)
- @list='$(bin_PROGRAMS)'; for p in $$list; do \
- f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
- echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \
- rm -f "$(DESTDIR)$(bindir)/$$f"; \
- done
-
-clean-binPROGRAMS:
- @list='$(bin_PROGRAMS)'; for p in $$list; do \
- f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
- echo " rm -f $$p $$f"; \
- rm -f $$p $$f ; \
- done
-audump$(EXEEXT): $(audump_OBJECTS) $(audump_DEPENDENCIES)
- @rm -f audump$(EXEEXT)
- $(LINK) $(audump_OBJECTS) $(audump_LDADD) $(LIBS)
-
-mostlyclean-compile:
- -rm -f *.$(OBJEXT)
-
-distclean-compile:
- -rm -f *.tab.c
-
- at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/audump.Po at am__quote@
-
-.c.o:
- at am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
- at am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
- at AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
- at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
- at am__fastdepCC_FALSE@ $(COMPILE) -c $<
-
-.c.obj:
- at am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
- at am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
- at AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
- at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
- at am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
-
-.c.lo:
- at am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
- at am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
- at AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
- at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
- at am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $<
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- mkid -fID $$unique
-tags: TAGS
-
-TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
- test -n "$$unique" || unique=$$empty_fix; \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$tags $$unique; \
- fi
-ctags: CTAGS
-CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(CTAGS_ARGS)$$tags$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$tags $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && cd $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) $$here
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
- fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
- else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(PROGRAMS)
-installdirs:
- for dir in "$(DESTDIR)$(bindir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-binPROGRAMS clean-generic clean-libtool mostlyclean-am
-
-distclean: distclean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
- distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-info: info-am
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-am
-
-install-exec-am: install-binPROGRAMS
-
-install-html: install-html-am
-
-install-info: install-info-am
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-ps: install-ps-am
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic \
- mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-binPROGRAMS
-
-.MAKE: install-am install-strip
-
-.PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \
- clean-generic clean-libtool ctags distclean distclean-compile \
- distclean-generic distclean-libtool distclean-tags distdir dvi \
- dvi-am html html-am info info-am install install-am \
- install-binPROGRAMS install-data install-data-am install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-pdf install-pdf-am install-ps install-ps-am \
- install-strip installcheck installcheck-am installdirs \
- maintainer-clean maintainer-clean-generic mostlyclean \
- mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
- pdf pdf-am ps ps-am tags uninstall uninstall-am \
- uninstall-binPROGRAMS
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
Copied: vendor/openbsm/1.2_alpha4/tools/Makefile.in (from rev 11163, vendor/openbsm/dist/tools/Makefile.in)
===================================================================
--- vendor/openbsm/1.2_alpha4/tools/Makefile.in (rev 0)
+++ vendor/openbsm/1.2_alpha4/tools/Makefile.in 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,558 @@
+# Makefile.in generated by automake 1.12.2 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2012 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+ at SET_MAKE@
+
+VPATH = @srcdir@
+am__make_dryrun = \
+ { \
+ am__dry=no; \
+ case $$MAKEFLAGS in \
+ *\\[\ \ ]*) \
+ echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
+ | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+ *) \
+ for am__flg in $$MAKEFLAGS; do \
+ case $$am__flg in \
+ *=*|--*) ;; \
+ *n*) am__dry=yes; break;; \
+ esac; \
+ done;; \
+ esac; \
+ test $$am__dry = yes; \
+ }
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+bin_PROGRAMS = audump$(EXEEXT)
+subdir = tools
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
+ $(top_srcdir)/config/depcomp
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+am__installdirs = "$(DESTDIR)$(bindir)"
+PROGRAMS = $(bin_PROGRAMS)
+am_audump_OBJECTS = audump.$(OBJEXT)
+audump_OBJECTS = $(am_audump_OBJECTS)
+audump_DEPENDENCIES = $(top_builddir)/libbsm/libbsm.la
+DEFAULT_INCLUDES = -I. at am__isrc@ -I$(top_builddir)/config
+depcomp = $(SHELL) $(top_srcdir)/config/depcomp
+am__depfiles_maybe = depfiles
+am__mv = mv -f
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+ --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+ --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
+ $(LDFLAGS) -o $@
+SOURCES = $(audump_SOURCES)
+DIST_SOURCES = $(audump_SOURCES)
+am__can_run_installinfo = \
+ case $$AM_UPDATE_INFO_DIR in \
+ n|no|NO) false;; \
+ *) (install-info --version) >/dev/null 2>&1;; \
+ esac
+ETAGS = etags
+CTAGS = ctags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LEX = @LEX@
+LEXLIB = @LEXLIB@
+LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MIG = @MIG@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+VERSION = @VERSION@
+YACC = @YACC@
+YFLAGS = @YFLAGS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+ at USE_NATIVE_INCLUDES_FALSE@INCLUDES = -I$(top_builddir) -I$(top_srcdir) -I$(top_srcdir)/sys
+ at USE_NATIVE_INCLUDES_TRUE@INCLUDES = -I$(top_builddir) -I$(top_srcdir)
+audump_SOURCES = audump.c
+audump_LDADD = $(top_builddir)/libbsm/libbsm.la
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .lo .o .obj
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+ && { if test -f $@; then exit 0; else break; fi; }; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign tools/Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --foreign tools/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+install-binPROGRAMS: $(bin_PROGRAMS)
+ @$(NORMAL_INSTALL)
+ @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+ if test -n "$$list"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
+ fi; \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed 's/$(EXEEXT)$$//' | \
+ while read p p1; do if test -f $$p || test -f $$p1; \
+ then echo "$$p"; echo "$$p"; else :; fi; \
+ done | \
+ sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
+ -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+ sed 'N;N;N;s,\n, ,g' | \
+ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+ if ($$2 == $$4) files[d] = files[d] " " $$1; \
+ else { print "f", $$3 "/" $$4, $$1; } } \
+ END { for (d in files) print "f", d, files[d] }' | \
+ while read type dir files; do \
+ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+ test -z "$$files" || { \
+ echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+ $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+ } \
+ ; done
+
+uninstall-binPROGRAMS:
+ @$(NORMAL_UNINSTALL)
+ @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+ files=`for p in $$list; do echo "$$p"; done | \
+ sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+ -e 's/$$/$(EXEEXT)/' `; \
+ test -n "$$list" || exit 0; \
+ echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+ cd "$(DESTDIR)$(bindir)" && rm -f $$files
+
+clean-binPROGRAMS:
+ @list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
+ echo " rm -f" $$list; \
+ rm -f $$list || exit $$?; \
+ test -n "$(EXEEXT)" || exit 0; \
+ list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+ echo " rm -f" $$list; \
+ rm -f $$list
+audump$(EXEEXT): $(audump_OBJECTS) $(audump_DEPENDENCIES) $(EXTRA_audump_DEPENDENCIES)
+ @rm -f audump$(EXEEXT)
+ $(LINK) $(audump_OBJECTS) $(audump_LDADD) $(LIBS)
+
+mostlyclean-compile:
+ -rm -f *.$(OBJEXT)
+
+distclean-compile:
+ -rm -f *.tab.c
+
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/audump.Po at am__quote@
+
+.c.o:
+ at am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+ at am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ at am__fastdepCC_FALSE@ $(COMPILE) -c $<
+
+.c.obj:
+ at am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+ at am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ at am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
+
+.c.lo:
+ at am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+ at am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ at am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $<
+
+mostlyclean-libtool:
+ -rm -f *.lo
+
+clean-libtool:
+ -rm -rf .libs _libs
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ set x; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ shift; \
+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ if test $$# -gt 0; then \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ "$$@" $$unique; \
+ else \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$unique; \
+ fi; \
+ fi
+ctags: CTAGS
+CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ test -z "$(CTAGS_ARGS)$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && $(am__cd) $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) "$$here"
+
+cscopelist: $(HEADERS) $(SOURCES) $(LISP)
+ list='$(SOURCES) $(HEADERS) $(LISP)'; \
+ case "$(srcdir)" in \
+ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+ *) sdir=$(subdir)/$(srcdir) ;; \
+ esac; \
+ for i in $$list; do \
+ if test -f "$$i"; then \
+ echo "$(subdir)/$$i"; \
+ else \
+ echo "$$sdir/$$i"; \
+ fi; \
+ done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+ else \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+check: check-am
+all-am: Makefile $(PROGRAMS)
+installdirs:
+ for dir in "$(DESTDIR)$(bindir)"; do \
+ test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+ done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+ if test -z '$(STRIP)'; then \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ install; \
+ else \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+ fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-binPROGRAMS clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-am
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+ distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am: install-binPROGRAMS
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+ mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-binPROGRAMS
+
+.MAKE: install-am install-strip
+
+.PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \
+ clean-generic clean-libtool cscopelist ctags distclean \
+ distclean-compile distclean-generic distclean-libtool \
+ distclean-tags distdir dvi dvi-am html html-am info info-am \
+ install install-am install-binPROGRAMS install-data \
+ install-data-am install-dvi install-dvi-am install-exec \
+ install-exec-am install-html install-html-am install-info \
+ install-info-am install-man install-pdf install-pdf-am \
+ install-ps install-ps-am install-strip installcheck \
+ installcheck-am installdirs maintainer-clean \
+ maintainer-clean-generic mostlyclean mostlyclean-compile \
+ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+ tags uninstall uninstall-am uninstall-binPROGRAMS
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
Deleted: vendor/openbsm/1.2_alpha4/tools/audump.c
===================================================================
--- vendor/openbsm/dist/tools/audump.c 2018-06-27 13:41:26 UTC (rev 11162)
+++ vendor/openbsm/1.2_alpha4/tools/audump.c 2018-06-27 22:39:39 UTC (rev 11164)
@@ -1,244 +0,0 @@
-/*-
- * Copyright (c) 2005-2006 Robert N. M. Watson
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * $P4: //depot/projects/trustedbsd/openbsm/tools/audump.c#7 $
- */
-
-#include <bsm/libbsm.h>
-#include <string.h>
-#include <err.h>
-#include <limits.h>
-#include <stdio.h>
-#include <stdlib.h>
-
-/*
- * Simple tool to dump various /etc/security databases using the defined APIs.
- */
-
-static void
-usage(void)
-{
-
- fprintf(stderr, "usage: audump [class|class_r|control|event|event_r|"
- "user|user_r]\n");
- exit(-1);
-}
-
-static void
-audump_class(void)
-{
- au_class_ent_t *cp;
-
- while ((cp = getauclassent()) != NULL)
- printf("0x%08x:%s:%s\n", cp->ac_class, cp->ac_name,
- cp->ac_desc);
-}
-
-static void
-audump_class_r(void)
-{
- char class_ent_name[AU_CLASS_NAME_MAX];
- char class_ent_desc[AU_CLASS_DESC_MAX];
- au_class_ent_t c, *cp;
-
- bzero(&c, sizeof(c));
- bzero(class_ent_name, sizeof(class_ent_name));
- bzero(class_ent_desc, sizeof(class_ent_desc));
- c.ac_name = class_ent_name;
- c.ac_desc = class_ent_desc;
-
- while ((cp = getauclassent_r(&c)) != NULL)
- printf("0x%08x:%s:%s\n", cp->ac_class, cp->ac_name,
- cp->ac_desc);
-}
-
-static void
-audump_control(void)
-{
- char string[PATH_MAX], string2[PATH_MAX];
- int ret, val;
- long policy;
-
- ret = getacflg(string, PATH_MAX);
- if (ret == -2)
- err(-1, "getacflg");
- if (ret != 0)
- errx(-1, "getacflg: %d", ret);
-
- printf("flags:%s\n", string);
-
- ret = getacmin(&val);
- if (ret == -2)
- err(-1, "getacmin");
- if (ret != 0)
- errx(-1, "getacmin: %d", ret);
-
- printf("min:%d\n", val);
-
- ret = getacna(string, PATH_MAX);
- if (ret == -2)
- err(-1, "getacna");
- if (ret != 0)
- errx(-1, "getacna: %d", ret);
-
- printf("naflags:%s\n", string);
-
- setac();
- do {
- ret = getacdir(string, PATH_MAX);
- if (ret == -1)
- break;
- if (ret == -2)
- err(-1, "getacdir");
- if (ret != 0)
- errx(-1, "getacdir: %d", ret);
- printf("dir:%s\n", string);
-
- } while (ret == 0);
-
- ret = getacpol(string, PATH_MAX);
- if (ret != 0)
- err(-1, "getacpol");
- if (au_strtopol(string, &policy) < 0)
- err(-1, "au_strtopol");
- if (au_poltostr(policy, PATH_MAX, string2) < 0)
- err(-1, "au_poltostr");
- printf("policy:%s\n", string2);
-}
-
-static void
-printf_classmask(au_class_t classmask)
-{
- au_class_ent_t *c;
- u_int32_t i;
- int first;
-
- first = 1;
- for (i = 0; i < 32; i++) {
- if (classmask & (2 << i)) {
- if (first)
- first = 0;
- else
- printf(",");
- c = getauclassnum(2 << i);
- if (c != NULL)
- printf("%s", c->ac_name);
- else
- printf("0x%x", 2 << i);
- }
- }
-}
-
-static void
-audump_event(void)
-{
- au_event_ent_t *ep;
-
- while ((ep = getauevent()) != NULL) {
- printf("%d:%s:%s:", ep->ae_number, ep->ae_name, ep->ae_desc);
- printf_classmask(ep->ae_class);
- printf("\n");
- }
-}
-
-static void
-audump_event_r(void)
-{
- char event_ent_name[AU_EVENT_NAME_MAX];
- char event_ent_desc[AU_EVENT_DESC_MAX];
- au_event_ent_t e, *ep;
-
- bzero(&e, sizeof(e));
- bzero(event_ent_name, sizeof(event_ent_name));
- bzero(event_ent_desc, sizeof(event_ent_desc));
- e.ae_name = event_ent_name;
- e.ae_desc = event_ent_desc;
-
- while ((ep = getauevent_r(&e)) != NULL) {
- printf("%d:%s:%s:", ep->ae_number, ep->ae_name, ep->ae_desc);
- printf_classmask(ep->ae_class);
- printf("\n");
- }
-}
-
-static void
-audump_user(void)
-{
- au_user_ent_t *up;
-
- while ((up = getauuserent()) != NULL) {
- printf("%s:", up->au_name);
- // printf_classmask(up->au_always);
- printf(":");
- // printf_classmask(up->au_never);
- printf("\n");
- }
-}
-
-static void
-audump_user_r(void)
-{
- char user_ent_name[AU_USER_NAME_MAX];
- au_user_ent_t u, *up;
-
- bzero(&u, sizeof(u));
- bzero(user_ent_name, sizeof(user_ent_name));
- u.au_name = user_ent_name;
-
- while ((up = getauuserent_r(&u)) != NULL) {
- printf("%s:", up->au_name);
- // printf_classmask(up->au_always);
- printf(":");
- // printf_classmask(up->au_never);
- printf("\n");
- }
-}
-
-int
-main(int argc, char *argv[])
-{
-
- if (argc != 2)
- usage();
-
- if (strcmp(argv[1], "class") == 0)
- audump_class();
- else if (strcmp(argv[1], "class_r") == 0)
- audump_class_r();
- else if (strcmp(argv[1], "control") == 0)
- audump_control();
- else if (strcmp(argv[1], "event") == 0)
- audump_event();
- else if (strcmp(argv[1], "event_r") == 0)
- audump_event_r();
- else if (strcmp(argv[1], "user") == 0)
- audump_user();
- else if (strcmp(argv[1], "user_r") == 0)
- audump_user_r();
- else
- usage();
-
- return (0);
-}
Copied: vendor/openbsm/1.2_alpha4/tools/audump.c (from rev 11163, vendor/openbsm/dist/tools/audump.c)
===================================================================
--- vendor/openbsm/1.2_alpha4/tools/audump.c (rev 0)
+++ vendor/openbsm/1.2_alpha4/tools/audump.c 2018-06-27 22:39:39 UTC (rev 11164)
@@ -0,0 +1,270 @@
+/*-
+ * Copyright (c) 2005-2009 Robert N. M. Watson
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#include <bsm/libbsm.h>
+#include <string.h>
+#include <err.h>
+#include <limits.h>
+#include <stdio.h>
+#include <stdlib.h>
+
+/*
+ * Simple tool to dump various /etc/security databases using the defined APIs.
+ */
+
+static void
+usage(void)
+{
+
+ fprintf(stderr, "usage: audump [class|class_r|control|event|event_r|"
+ "user|user_r]\n");
+ exit(-1);
+}
+
+static void
+audump_class(void)
+{
+ au_class_ent_t *cp;
+
+ while ((cp = getauclassent()) != NULL)
+ printf("0x%08x:%s:%s\n", cp->ac_class, cp->ac_name,
+ cp->ac_desc);
+}
+
+static void
+audump_class_r(void)
+{
+ char class_ent_name[AU_CLASS_NAME_MAX];
+ char class_ent_desc[AU_CLASS_DESC_MAX];
+ au_class_ent_t c, *cp;
+
+ bzero(&c, sizeof(c));
+ bzero(class_ent_name, sizeof(class_ent_name));
+ bzero(class_ent_desc, sizeof(class_ent_desc));
+ c.ac_name = class_ent_name;
+ c.ac_desc = class_ent_desc;
+
+ while ((cp = getauclassent_r(&c)) != NULL)
+ printf("0x%08x:%s:%s\n", cp->ac_class, cp->ac_name,
+ cp->ac_desc);
+}
+
+static void
+audump_control(void)
+{
+ char string[PATH_MAX], string2[PATH_MAX];
+ int ret, val;
+ long policy;
+ time_t age;
+ size_t size;
+
+ ret = getacflg(string, PATH_MAX);
+ if (ret == -2)
+ err(-1, "getacflg");
+ if (ret != 0)
+ errx(-1, "getacflg: %d", ret);
+
+ printf("flags:%s\n", string);
+
+ ret = getacmin(&val);
+ if (ret == -2)
+ err(-1, "getacmin");
+ if (ret != 0)
+ errx(-1, "getacmin: %d", ret);
+
+ printf("min:%d\n", val);
+
+ ret = getacna(string, PATH_MAX);
+ if (ret == -2)
+ err(-1, "getacna");
+ if (ret != 0)
+ errx(-1, "getacna: %d", ret);
+
+ printf("naflags:%s\n", string);
+
+ setac();
+ do {
+ ret = getacdir(string, PATH_MAX);
+ if (ret == -1)
+ break;
+ if (ret == -2)
+ err(-1, "getacdir");
+ if (ret != 0)
+ errx(-1, "getacdir: %d", ret);
+ printf("dir:%s\n", string);
+
+ } while (ret == 0);
+
+ ret = getacpol(string, PATH_MAX);
+ if (ret != 0)
+ err(-1, "getacpol");
+ if (au_strtopol(string, &policy) < 0)
+ err(-1, "au_strtopol");
+ if (au_poltostr(policy, PATH_MAX, string2) < 0)
+ err(-1, "au_poltostr");
+ printf("policy:%s\n", string2);
+
+ ret = getacfilesz(&size);
+ if (ret == -2)
+ err(-1, "getacfilesz");
+ if (ret != 0)
+ err(-1, "getacfilesz: %d", ret);
+
+ printf("filesz:%ldB\n", size);
+
+
+ ret = getachost(string, PATH_MAX);
+ if (ret == -2)
+ err(-1, "getachost");
+ if (ret == -3)
+ err(-1, "getachost: %d", ret);
+ if (ret == 0 && ret != 1)
+ printf("host:%s\n", string);
+
+ ret = getacexpire(&val, &age, &size);
+ if (ret == -2)
+ err(-1, "getacexpire");
+ if (ret == -1)
+ err(-1, "getacexpire: %d", ret);
+ if (ret == 0 && ret != 1)
+ printf("expire-after:%ldB %s %lds\n", size,
+ val ? "AND" : "OR", age);
+}
+
+static void
+printf_classmask(au_class_t classmask)
+{
+ au_class_ent_t *c;
+ u_int32_t i;
+ int first;
+
+ first = 1;
+ for (i = 0; i < 32; i++) {
+ if (classmask & (1 << i)) {
+ if (first)
+ first = 0;
+ else
+ printf(",");
+ c = getauclassnum(1 << i);
+ if (c != NULL)
+ printf("%s", c->ac_name);
+ else
+ printf("0x%x", 1 << i);
+ }
+ }
+}
+
+static void
+audump_event(void)
+{
+ au_event_ent_t *ep;
+
+ while ((ep = getauevent()) != NULL) {
+ printf("%d:%s:%s:", ep->ae_number, ep->ae_name, ep->ae_desc);
+ printf_classmask(ep->ae_class);
+ printf("\n");
+ }
+}
+
+static void
+audump_event_r(void)
+{
+ char event_ent_name[AU_EVENT_NAME_MAX];
+ char event_ent_desc[AU_EVENT_DESC_MAX];
+ au_event_ent_t e, *ep;
+
+ bzero(&e, sizeof(e));
+ bzero(event_ent_name, sizeof(event_ent_name));
+ bzero(event_ent_desc, sizeof(event_ent_desc));
+ e.ae_name = event_ent_name;
+ e.ae_desc = event_ent_desc;
+
+ while ((ep = getauevent_r(&e)) != NULL) {
+ printf("%d:%s:%s:", ep->ae_number, ep->ae_name, ep->ae_desc);
+ printf_classmask(ep->ae_class);
+ printf("\n");
+ }
+}
+
+static void
+audump_user(void)
+{
+ au_user_ent_t *up;
+
+ while ((up = getauuserent()) != NULL) {
+ printf("%s:", up->au_name);
+ // printf_classmask(up->au_always);
+ printf(":");
+ // printf_classmask(up->au_never);
+ printf("\n");
+ }
+}
+
+static void
+audump_user_r(void)
+{
+ char user_ent_name[AU_USER_NAME_MAX];
+ au_user_ent_t u, *up;
+
+ bzero(&u, sizeof(u));
+ bzero(user_ent_name, sizeof(user_ent_name));
+ u.au_name = user_ent_name;
+
+ while ((up = getauuserent_r(&u)) != NULL) {
+ printf("%s:", up->au_name);
+ // printf_classmask(up->au_always);
+ printf(":");
+ // printf_classmask(up->au_never);
+ printf("\n");
+ }
+}
+
+int
+main(int argc, char *argv[])
+{
+
+ if (argc != 2)
+ usage();
+
+ if (strcmp(argv[1], "class") == 0)
+ audump_class();
+ else if (strcmp(argv[1], "class_r") == 0)
+ audump_class_r();
+ else if (strcmp(argv[1], "control") == 0)
+ audump_control();
+ else if (strcmp(argv[1], "event") == 0)
+ audump_event();
+ else if (strcmp(argv[1], "event_r") == 0)
+ audump_event_r();
+ else if (strcmp(argv[1], "user") == 0)
+ audump_user();
+ else if (strcmp(argv[1], "user_r") == 0)
+ audump_user_r();
+ else
+ usage();
+
+ return (0);
+}
More information about the Midnightbsd-cvs
mailing list