[Midnightbsd-cvs] src [11795] trunk/etc/etc.sparc64: add sparc

[laffer1 at midnightbsd.org]

Revision: 11795
          http://svnweb.midnightbsd.org/src/?rev=11795
Author:   laffer1
Date:     2018-07-11 20:05:53 -0400 (Wed, 11 Jul 2018)
Log Message:
-----------
add sparc

Added Paths:
-----------
    trunk/etc/etc.sparc64/
    trunk/etc/etc.sparc64/ttys

Added: trunk/etc/etc.sparc64/ttys
===================================================================
--- trunk/etc/etc.sparc64/ttys	                        (rev 0)
+++ trunk/etc/etc.sparc64/ttys	2018-07-12 00:05:53 UTC (rev 11795)
@@ -0,0 +1,54 @@
+#
+# $MidnightBSD$
+#	@(#)ttys	5.1 (Berkeley) 4/17/89
+#
+# This file specifies various information about terminals on the system.
+# It is used by several different programs.  Common entries for the
+# various columns include:
+#
+# name  The name of the terminal device.
+#
+# getty The program to start running on the terminal.  Typically a
+#       getty program, as the name implies.  Other common entries
+#       include none, when no getty is needed, and xdm, to start the
+#       X Window System.
+#
+# type The initial terminal type for this port.  For hardwired
+#      terminal lines, this will contain the type of terminal used.
+#      For virtual consoles, the correct type is typically xterm.
+#      Other common values include dialup for incoming modem ports, and
+#      unknown when the terminal type cannot be predetermined.
+#
+# status Must be on or off.  If on, init will run the getty program on
+#        the specified port.  If the word "secure" appears, this tty
+#        allows root login.
+#
+# name	getty				type	status		comments
+#
+# If console is marked "insecure", then init will ask for the root password
+# when going to single-user mode.
+console	none				unknown	off secure
+# ofw_console(4)
+screen	"/usr/libexec/getty Pc"		vt100	off secure
+ttya	"/usr/libexec/getty 3wire.9600"	vt100	off secure
+ttyb	"/usr/libexec/getty 3wire.9600"	vt100	off secure
+# syscons(4)
+ttyv0	"/usr/libexec/getty Pc"		xterm	on  secure
+# Virtual terminals
+ttyv1	"/usr/libexec/getty Pc"		xterm	on  secure
+ttyv2	"/usr/libexec/getty Pc"		xterm	on  secure
+ttyv3	"/usr/libexec/getty Pc"		xterm	on  secure
+ttyv4	"/usr/libexec/getty Pc"		xterm	on  secure
+ttyv5	"/usr/libexec/getty Pc"		xterm	on  secure
+ttyv6	"/usr/libexec/getty Pc"		xterm	on  secure
+ttyv7	"/usr/libexec/getty Pc"		xterm	on  secure
+ttyv8	"/usr/local/bin/xdm -nodaemon"	xterm	off secure
+# Serial terminals
+# The 'dialup' keyword identifies dialin lines to login, fingerd etc.
+# uart(4)
+ttyu0	"/usr/libexec/getty 3wire"	vt100	onifconsole secure
+ttyu1	"/usr/libexec/getty 3wire"	vt100	onifconsole secure
+ttyu2	"/usr/libexec/getty 3wire"	vt100	onifconsole secure
+ttyu3	"/usr/libexec/getty 3wire"	vt100	onifconsole secure
+# Dumb console
+dcons	"/usr/libexec/getty std.9600"	vt100	off secure


Property changes on: trunk/etc/etc.sparc64/ttys
___________________________________________________________________
Added: svn:keywords
## -0,0 +1 ##
+MidnightBSD=%H
\ No newline at end of property