[Midnightbsd-cvs] src [12385] trunk/sys/sys/iov.h: Sync with FreeBSD 11-stable

laffer1 at midnightbsd.org laffer1 at midnightbsd.org
Sun Feb 16 17:42:27 EST 2020


Revision: 12385
          http://svnweb.midnightbsd.org/src/?rev=12385
Author:   laffer1
Date:     2020-02-16 17:42:27 -0500 (Sun, 16 Feb 2020)
Log Message:
-----------
Sync with FreeBSD 11-stable

Added Paths:
-----------
    trunk/sys/sys/iov.h

Added: trunk/sys/sys/iov.h
===================================================================
--- trunk/sys/sys/iov.h	                        (rev 0)
+++ trunk/sys/sys/iov.h	2020-02-16 22:42:27 UTC (rev 12385)
@@ -0,0 +1,258 @@
+/* $MidnightBSD$ */
+/*-
+ * Copyright (c) 2013-2015 Sandvine Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * $FreeBSD: stable/11/sys/sys/iov.h 296865 2016-03-14 17:41:17Z rstone $
+ */
+
+#ifndef _SYS_IOV_H_
+#define _SYS_IOV_H_
+
+#include <sys/ioccom.h>
+
+#define	PF_CONFIG_NAME		"PF"
+#define	VF_SCHEMA_NAME		"VF"
+
+#define	VF_PREFIX		"VF-"
+#define	VF_PREFIX_LEN		3
+#define	VF_NUM_LEN		5	/* The maximum VF num is 65535. */
+#define	VF_MAX_NAME		(VF_PREFIX_LEN + VF_NUM_LEN + 1)
+
+#define	DRIVER_CONFIG_NAME	"DRIVER"
+#define	IOV_CONFIG_NAME		"IOV"
+
+#define	TYPE_SCHEMA_NAME	"TYPE"
+#define	DEFAULT_SCHEMA_NAME	"DEFAULT"
+#define	REQUIRED_SCHEMA_NAME	"REQUIRED"
+
+/*
+ * Because each PF device is expected to expose a unique set of possible
+ * configurations, the SR-IOV infrastructure dynamically queries the PF
+ * driver for its capabilities.  These capabilities are exposed to userland
+ * with a configuration schema.  The schema is exported from the kernel as a
+ * packed nvlist.  See nv(3) for the details of the nvlist API.  The expected
+ * format of the nvlist is:
+ *
+ * BASIC RULES
+ *   1) All keys are case-insensitive.
+ *   2) No keys that are not specified below may exist at any level of the
+ *      schema.
+ *   3) All keys are mandatory unless explicitly documented as optional.  If a
+ *      key is mandatory then the associated value is also mandatory.
+ *   4) Order of keys is irrelevant.
+ *
+ * TOP LEVEL
+ *   1) There must be a top-level key with the name PF_CONFIG_NAME.  The value
+ *      associated with this key is a nvlist that follows the device schema
+ *      node format.  The parameters in this node specify the configuration
+ *      parameters that may be applied to a PF.
+ *   2) There must be a top-level key with the name VF_SCHEMA_NAME.  The value
+ *      associated with this key is a nvlist that follows the device schema
+ *      node format.  The parameters in this node specify the configuration
+ *      parameters that may be applied to a VF.
+ *
+ * DEVICE SCHEMA NODE
+ *   1) There must be a key with the name DRIVER_CONFIG_NAME.  The value
+ *      associated with this key is a nvlist that follows the device/subsystem
+ *      schema node format.  The parameters in this node specify the
+ *      configuration parameters that are specific to a particular device
+ *      driver.
+ *   2) There must be a key with the name IOV_CONFIG_NAME.  The value associated
+ *      with this key is an nvlist that follows the device/subsystem schema node
+ *      format.  The parameters in this node specify the configuration
+ *      parameters that are applied by the SR-IOV infrastructure.
+ *
+ * DEVICE/SUBSYSTEM SCHEMA NODE
+ *   1) All keys in the device/subsystem schema node are optional.
+ *   2) Each key specifies the name of a valid configuration parameter that may
+ *      be applied to the device/subsystem combination specified by this node.
+ *      The value associated with the key specifies the format of valid
+ *      configuration values, and must be a nvlist in parameter schema node
+ *      format.
+ *
+ * PARAMETER SCHEMA NODE
+ *   1) The parameter schema node must contain a key with the name
+ *      TYPE_SCHEMA_NAME.  The value associated with this key must be a string.
+ *      This string specifies the type of value that the parameter specified by
+ *      this node must take.  The string must have one of the following values:
+ *         - "bool"     - The configuration value must be a boolean.
+ *         - "mac-addr" - The configuration value must be a binary value.  In
+ *                         addition, the value must be exactly 6 bytes long and
+ *                         the value must not be a multicast or broadcast mac.
+ *         - "uint8_t"  - The configuration value must be a integer value in
+ *                         the range [0, UINT8_MAX].
+ *         - "uint16_t" - The configuration value must be a integer value in
+ *                         the range [0, UINT16_MAX].
+ *         - "uint32_t" - The configuration value must be a integer value in
+ *                         the range [0, UINT32_MAX].
+ *         - "uint64_t" - The configuration value must be a integer value in
+ *                         the range [0, UINT64_MAX].
+ *  2) The parameter schema may contain a key with the name
+ *     REQUIRED_SCHEMA_NAME.  This key is optional.  If this key is present, the
+ *     value associated with it must have a boolean type.  If the value is true,
+ *     then the parameter specified by this schema is a required parameter.  All
+ *     valid configurations must include all required parameters.
+ *  3) The parameter schema may contain a key with the name DEFAULT_SCHEMA_NAME.
+ *     This key is optional.  This key must not be present if the parameter
+ *     specified by this schema is required.  If this key is present, the value
+ *     associated with the parent key must follow all restrictions specified by
+ *     the type specified by this schema.  If a configuration does not supply a
+ *     value for the parameter specified by this schema, then the kernel will
+ *     apply the value associated with this key in its place.
+ *
+ * The following is an example of a valid schema, as printed by nvlist_dump.
+ * Keys are printed followed by the type of the value in parantheses.  The
+ * value is displayed following a colon.  The indentation level reflects the
+ * level of nesting of nvlists.  String values are displayed between []
+ * brackets.  Binary values are shown with the length of the binary value (in
+ * bytes) followed by the actual binary values.
+ *
+ *  PF (NVLIST):
+ *      IOV (NVLIST):
+ *          num_vfs (NVLIST):
+ *              type (STRING): [uint16_t]
+ *              required (BOOL): TRUE
+ *          device (NVLIST):
+ *              type (STRING): [string]
+ *              required (BOOL): TRUE
+ *      DRIVER (NVLIST):
+ *  VF (NVLIST):
+ *      IOV (NVLIST):
+ *          passthrough (NVLIST):
+ *              type (STRING): [bool]
+ *              default (BOOL): FALSE
+ *      DRIVER (NVLIST):
+ *          mac-addr (NVLIST):
+ *              type (STRING): [mac-addr]
+ *              default (BINARY): 6 000000000000
+ *          vlan (NVLIST):
+ *               type (STRING): [uint16_t]
+ *          spoof-check (NVLIST):
+ *              type (STRING): [bool]
+ *              default (BOOL): TRUE
+ *          allow-set-mac (NVLIST):
+ *              type (STRING): [bool]
+ *              default (BOOL): FALSE
+ */
+struct pci_iov_schema
+{
+	void *schema;
+	size_t len;
+	int error;
+};
+
+/*
+ * SR-IOV configuration is passed to the kernel as a packed nvlist.  See nv(3)
+ * for the details of the nvlist API.  The expected format of the nvlist is:
+ *
+ * BASIC RULES
+ *   1) All keys are case-insensitive.
+ *   2) No keys that are not specified below may exist at any level of the
+ *      config nvlist.
+ *   3) Unless otherwise specified, all keys are optional.  It should go without
+ *      saying a key being mandatory is transitive: that is, if a key is
+ *      specified to contain a sub-nodes that contains a mandatory key, then
+ *      the outer key is implicitly mandatory.  If a key is mandatory then the
+ *      associated value is also mandatory.
+ *   4) Order of keys is irrelevant.
+ *
+ * TOP LEVEL OF CONFIG NVLIST
+ * 1) All keys specified in this section are mandatory.
+ * 2) There must be a top-level key with the name PF_CONFIG_NAME.  The value
+ *    associated is an nvlist that follows the "device node" format.  The
+ *    parameters in this node specify parameters that apply to the PF.
+ * 3) For every VF being configured (this is set via the "num_vfs" parameter
+ *    in the PF section), there must be a top-level key whose name is VF_PREFIX
+ *    immediately followed by the index of the VF as a decimal integer.  For
+ *    example, this would be VF-0 for the first VF.  VFs are numbered starting
+ *    from 0.  The value associated with this key follows the "device node"
+ *    format.  The parameters in this node specify configuration that applies
+ *    to the VF specified in the key.  Leading zeros are not permitted in VF
+ *    index.  Configuration for the second VF must be specified in a node with
+ *    the key VF-1.  VF-01 is not a valid key.
+ *
+ * DEVICE NODES
+ * 1) All keys specified in this section are mandatory.
+ * 2) The device node must contain a key with the name DRIVER_CONFIG_NAME.  The
+ *    value associated with this key is an nvlist following the subsystem node
+ *    format.  The parameters in this key specify configuration that is specific
+ *    to a particular device driver.
+ * 3) The device node must contain a key with the name IOV_CONFIG_NAME.  The
+ *    value associated with this key is an nvlist following the subsystem node
+ *    format.  The parameters in this key specify configuration that is consumed
+ *    by the SR-IOV infrastructure.
+ *
+ * SUBSYSTEM NODES
+ * 1) A subsystem node specifies configuration parameters that apply to a
+ *    particular subsystem (driver or infrastructure) of a particular device
+ *    (PF or individual VF).
+ *         Note: We will refer to the section of the configuration schema that
+ *               specifies the parameters for this subsystem and device
+ *               configuration as the device/subystem schema.
+ * 2) The subsystem node must contain only keys that correspond to parameters
+ *    that are specified in the device/subsystem schema.
+ * 3) Every parameter specified as required in the device/subsystem schema is
+ *    a mandatory key in the subsystem node.
+ *    Note:  All parameters that are not required in device/subsystem schema are
+ *           optional keys.  In particular, any parameter specified to have a
+ *           default value in the device/subsystem schema is optional.  The
+ *           kernel is responsible for applying default values.
+ * 4) The value of every parameter in the device node must conform to the
+ *    restrictions of the type specified for that parameter in the device/
+ *    subsystem schema.
+ *
+ * The following is an example of a valid configuration, when validated against
+ * the schema example given above.
+ *
+ * PF (NVLIST):
+ *     driver (NVLIST):
+ *     iov (NVLIST):
+ *         num_vfs (NUMBER): 3 (3) (0x3)
+ *         device (STRING): [ix0]
+ * VF-0 (NVLIST):
+ *     driver (NVLIST):
+ *         vlan (NUMBER): 1000 (1000) (0x3e8)
+ *     iov (NVLIST):
+ *         passthrough (BOOL): TRUE
+ * VF-1 (NVLIST):
+ *     driver (NVLIST):
+ *     iov (NVLIST):
+ * VF-2 (NVLIST):
+ *     driver (NVLIST):
+ *         mac-addr (BINARY): 6 020102030405
+ *     iov (NVLIST):
+ */
+struct pci_iov_arg
+{
+	void *config;
+	size_t len;
+};
+
+#define	IOV_CONFIG	_IOW('p', 10, struct pci_iov_arg)
+#define	IOV_DELETE	_IO('p', 11)
+#define	IOV_GET_SCHEMA	_IOWR('p', 12, struct pci_iov_schema)
+
+#endif
+


Property changes on: trunk/sys/sys/iov.h
___________________________________________________________________
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Added: svn:keywords
## -0,0 +1 ##
+MidnightBSD=%H
\ No newline at end of property
Added: svn:mime-type
## -0,0 +1 ##
+text/plain
\ No newline at end of property


More information about the Midnightbsd-cvs mailing list