This commit was manufactured by cvs2svn to create tag 'RELEASE_0_1_0'.
Mark as broken on 0.1 only
Update dovecot to 1.0.3
Dovecot 1.0.2
Add missing patches.
Update to zsh 4.3.4. Update sites. Switch to Options
Update linux-opera to 9.22.
Really update to p29.
We actually have p28 not 29.
The last approach did not work in CURRENT. The GNUstep path ended up as /usr/local/GNUstep/Local/Local/Applications/WPrefs.app in CURRENT but /usr/local/GNUstep/Local/Applications/WPrefs.app in 0.1. This version uses @prefix which *may* work as expected in both CURRENT and 0.1. Tested on 0.1 so far.
5 days ago, the path was changed for WPrefs.app. This caused make install to faiil on 0.1. The configure script hard coded the GNUstep path to GNUstep/Applications. Somehow this was unnoticed on CURRENT or worked properly. Patch the configure script with the correct path so that we can build this for 0.1-RELEASE.
Bump version
CUPS 1.2.11. This fixes several security issues.
Mark broken
Update to 2.84. Unbreak p5-Mail-SpamAssassin.
1.2.10
Some pkg-plist fixes.
Update to 1.2.9
Comment out the 1.12 revision. It was breaking gnustep-back. The messages=yes line...
1.2.8
Make sure that MAKE_FLAGS was ending with -f. Make was thinking that we wanted to make the GNUMakefile, when we wanted to /use/ the GNUMakefile.
Remove unneeded ldconig stuff.
Fix syntax error.
Update to 1.4.10
Update pkg-config to .22
Correct error in previous commit.
Ignore Packages if it exists.
Adjust for mports.
OSVERSION
OSVERSION
OSVERSION
OSVERSION
Remove conflicts definitions that don't apply to us.
OSVERSION
Remove OSVERSION. This isn't faking right though.
Remove OSVERSION
REmove OSVERSION
Update clamav-milter script to be more intelligent about timeouts. Improve the thread choice stuff within patch-configure.
Fix malformed makefile
Update to .91.1
OSVERSION
We already have strtonum
Mark port broken until we can fix it.
Remove pkg-req which is not needed on MidnightBSD OSVERSION
Don't encourage OSVERSION
OSVERSION
OSVERSION
OSVER
Don't need pkg-message. OSVERSION
OSVERSION
OSVERSION $MidnightBSD$
Get rid of OSVERSION and FreeBSD 4 patch
Get rid of OSVERSION
Get rid of OSVERSION
Remove OSVERSION check
Remove OSVERSION check.
Remove some unneeded version checks.
Set OSREL accordingly
This software is frequently updated and we are quite behind.
*** empty log message ***
Update to 3.7.4
2.0.0.6
Update to beta 12
add gnustep category
add -k Patch security issue equivalent to FreeBSD SA 06 21
add -k flag. Patch security issue equivalent to FreeBSD SA 06 21
Add bin/uncompress to plist.
Update to 1.3.12. There are some security issues even with this version, but it is the latest.
*** empty log message ***
Update to 1.0.4
Set GCC default to 4.2
Get rid of dead GNUstep mirrors.
Update COMMENT
Add USE_GCPIO to pull in the GNU cpio to fix ports in CURRENT.
Introduce new USE_GCPIO option. This must be set to use ${CPIO} in a makefile. It sets an extract dependancy on the new archivers/gcpio port. This is needed to fix the linux ports as they rely on GNU style -- features.
Add GNU cpio 2.9 to mports. This version is under GPLv3. The port was based on OpenBSD's ports/archivers/gcpio.
2.1.14 is borked. This version seems to build the pkgdb properly.
Clean up pkg-descr
Update to AddressManager 0.4.7.
Updated to the gnustep-make 2 paths.
Update to the new way we do gnustep shared libs.
Skip ahead on symlinks. We just want to see that the link is there. It might not make any sense until final install time.
Minor change.
Clarify we automatically try to source GNUstep.csh etc
We don't use PARALLEL_PACKAGE_BUILD
Might as well try to update gorm to latest.
GNUstep-make 2.0.1
trueprefix strikes again. This port built a package but did not install wmCalClock. It appears it was completely missing a pkg-plist. By getting rid of true prefix, editing the patch-aa to use ${PREFIX} and making the pkg-plist, the binary is properly installed in /usr/local/bin/wmCalClock.
Update to 2.1.4. This is still ancient. (june 2006?)
Get rid of some cruft.
ctriv's going to hate this. It's a terrible hackjob, but it's 2:30 am and I want to go to bed.
Update to slim 1.3.0
Add nmapfe
Update sudo to 1.6.9p2. This version installs in /usr/local and does not replace the system sudo.
Add saint.
add fusefs-curlftpfs
forgot patch-ae
Update to 1.2.18.
Fix long standing problem where libpng-config was created in /usr/local/bin instead of the fake directory. As the path is still set properly to /usr/local for the library in libpng-conf but it is installed in ${DESTDIR}${PREFIX}, everything should work according to plan.
The cairo port is acting up with png, so hopefully we've fixed some of the problems on that front.
add fuse union fs
check-license stopping make was so annoying that MPORT_MAINTAINER_MODE wasn't being used. Changed to sleep for 5 seconds instead. The package-recursive target was broken for the new port build process. Updated to the new reality.
Add fusefs-httpfs
add firewalk
Add fusefs-ntfs
Update to 1.8
Update to 2.7.0
cleanup
slight clean up, text spacing. no functional changes.
This port needs a lot of work.
Add nmap!
Add l0phtcrack
Update xemacs 21.4.20
Update GWorkspace.app to latest.
Update linux thunderbird to 2.0.0.5.
Update GNU tar to 1.18.
Update vim to 7.1.044 (minus a few win32 and make test patches)
updated pekwm to 0.1.6
Add -q to make output a little quieter.
Remove static option.
Update mksh to R30.
Don't need cat pkg-message
Bind 9.4.1-P1
Update to 9.3.4-P1 to address a security issue.
Update mksh to r29g
Mark this broken until I can make a new patch.
Update to 4.21
Remove some of the old FreeBSD version hacks. Brand it for our system.
curl's shlib version was bumped during an update, but we didn't fix php. Correct this oversight.
add re2c
Update to 1.1.12. This needs a lot of work yet. You can build the browser on amd64, but mail and news as well as several other options do not work yet.
update to latest
update to latest
update to latest.
Update to 1.06
update to latest.
update to latest
update to latest version.
update to latest.
update to latest.
Update to latest version.
update to latest.
Update to latest
Update to latest version
Update YAML to most recent version.
Update p5-threads and p5-threads-shared to the most recent versions.
Add p5-Mail-SPF
Add p5-Net-DNS-Resolver-Programmable
add p5-version
Add p5-NetAddr-IP for SpamAssassin
Add open-cobol
Better update to the latest version. It seems like I just updated this. :)
Update to 1.4.15. There are still a few security issues that need to get sorted
We shouldn't cat the message under the new ports build framework.
add thttpd with stateful threads.
Adding st, a stateful threads library for internet applications derived from nspr.
add mdf2iso
Correcting Makefile so that link to /etc/ssl/cert.pem is pointing to the correct location after install and not the work directory.
Add linux-flock, a mozilla derivative with social browsing/flicker integration.
Update to SeaMonkey 1.1.2. This release fixes several small problems and includes 5 security updates. The URI was changed to http://www.seamonkey-project.org/
Update cdrtools to 2.01.01a31. This version includes support for BlueRay which might matter someday. This version was released today.
Add cvsnt port.
Add bsd-splash-changer.
Add 9base, a series of tools from plan9
add p5-Term-ShellUI
Add p5-ReadLine-Perl
Update to patch 29
Update pkg-descr.
Update to links-1.00pre20, the latest release as of July 2007. It was released in april 2007.
update to links 1.0pre15
update to links 1.00 pre13
1.00 pre 8
links 1.00pre1 (2004)
This port is still quite ancient, but we've bumped it up to .99. (2003)
Update to lynx 2.8.6 patch 5 (May 2007)
Update to 2.0.0.5
Add p5-Compress-Raw-Bzip2
Update spamassassin to 3.21. This update includes a fix for a local symlink vulnerability.
Update this too.
Bump this too.
This could use a bump too.
Might as well update this while i'm at it.
Required update.
Add p5-Math-BigRat
add p5-bignum
The old version was no longer available. This is required for spam assassin
Add p5-Encode-Detect.
Update to OpenBSD spamd 4.
Add lcab.
Update to xterm 227. Fixes free and intel compiler problems introduced in 226. 226 introduced quite a few changes.
Update to xterm 225
add nttcp
add iperf
add fhourstones
add dkftpbench
add netio
add dbs.
add pathrate
add raidtest
add pybench
Add pybench.
add rawio
Add scimark2c
Aren't we missing something...
Here you go archite.
add p5-Time-Local
Add p5-threads, p5-threads-shared
Add p5-Time-HiRes
Upgrade to .94
Update GNU m4 to 1.4.9
fix for i386 make install error.
Fix build on 5.2.3
Update to php 5.2.23 which includes several security fixes.
Remove optimized byte swap routine for i386. This is broken with the new version and we don't have the resources to maintain patches like this.
Don't try to do anything for ldconfig with gnustep. GNUstep will configure LD_LIBRARY_PATH for you if you source the right files (which we do ay boot by default in mbsd); thus the painful ldconfig gyrations that freebsd created aren't needed.
Cleaned up bugs in new prefix handling. This should fix problems with gnustep ports.
Add lincity
Opera 9.21 update
Fix typo.
Fix Opera 9.10 install.
Add xenon, an X11 based text editor.
Add limewire
This patch is no longer needed.
Remove comment
remove unneeded patch
Update to 4.0.3
Update to 0.7.4
Upgrade libtorrent to 0.11.4
Add screenie
Update to 8.14.1
Update to 1.0.1 (release version)
add streamdvd
update libdvdread
Update libdvdread to .97. Any ports requiring a specific library version will need a bump to .5
add p5-XML-Writer.
Add awstats.
Add p5-Net-XWhois
add mutella
frontend to gift
add gift and some of the protocols.
Add adodb, a PHP wrapper for database access.
Add ctorrent
Update MySQL to 5.0.41.
Policy cleanups.
Policy cleanups.
Policy cleanups.
Add license.
Add license.
Fake fixes. Add license.
Add LICENSE
Add LICENSE. Fix a few problems in pkg-glue.
Add LICENSE.
Fake fixes. Set LICENSE.
Extension cleanup. Set LICENSE.
Add license.
PERL_CONFIGURE wasn't implying USE_PERL5. Fixed.
Add license. Removed needless PERL_LEVEL check.
Add license.
Add license.
Add LICENSE
Fake/Policy fixes.
Add LICENSE
Marked as broken. (Build fails). Policy fixups.
Ignore perl modules' packlists. This is a workaround for a known bug in ExtUtils::MakeMaker.
Policy cleanups.
Update to 2.0.0.4, a security release.
Policy fixes.
add asclock
Fix bsd.perl.mk include for scripts port.
Various cleanups.
Fix bsd.perl.mk include for the scripts port.
PERL_CONFIGURE needs to be before the include of bsd.pre.port.mk, otherwise PERL_LEVEL is undefined.
The last commit broke make package's dependancy on make fake. Fixed.
Fake fix.
add license.
Force symlink
Removed reference to unsed variable USE_GETOPT_LONG. Fixed fake bug in portdocs. Added unknown license type. Changed how check-fake works. It no longer depends on fake, but now make fake will run the check if MPORT_MAINTAINER_MODE is defined.
Policy cleanups.
Policy cleanups.
Remove alpha bits.
Mark mail/news broken for now
Fix maintainer
Looks like an old change that wasn't commited.
Policy cleanups.
Policy cleanup.
Cleanups. Use USE_LDCONFIG. add license.
Add license
Added modula3 license. removed some extra noise from the check-license target.
Add license.
Add LICENSE. Few other cleanups. despite what the comments say, the USE_REINPLACE var hasn't been used for over a year.
Added support for the LICENSE variable. The current list of valid licenses can be found with the license-list target. This list is incomplete and will probably change. Renamed check_fake to check-fake to be more consistant with similar targets.
No MPORT_MAINTAINER_MODE for this port, having it defined would create a circular dependancy.
Added MPORT_MAINTAINER_MODE. This variable will turn on checks at points in the process to insure correct behavior. NOTE: YOU MUST INSTALL PERL WITH THIS UNSET BEFORE USING IT.
Handle the man page properly.
Improved fake checker. Now checks the contents of files for the fake destdir. Exits non-zero when fake fails.
Added check_fake target.
Fake cleanup.
Fake cleanup.
Fake cleanup.
Fix pkg-config file.
Fake fix.
Fake cleanups.
Clean up.
Moved pkg-message to the files dir.
Whole bunch of cleanup. The configure script doesn't know how to use db 42, so require 41. Don't display the pkg-message unless PAM is enabled. Use options system. Fake cleanups.
Fake fix.
Add FSViewer.app, a Wings based file manager with an appearance similar to the old NeXT file manager.
Add pr, a port replicator and tester
Add gentoo, a GTK based file manager. Yeah, its weird the name is the same as a certain linux distro... connection?
Use USE_LDCONFIG.
Fake cleanups.
Fix the she-bang lines on the scripts.
Fixes for gnustep-make 2.
Fixed fake issues. It looks like the shared library is not being built. Marked port as broken - I don't know how to fix this.
Fake fixes.
If PREFIX has been set directly, make sure that TRUE_PREFIX is set to match.
Update siege to 2.66 released 3/29/07.
Remove postmark. The paper and all references to the benchmark seem to be gone.
Update iozone to the latest version.
Add iozone21
Fake fix.
Fake fix.
Put MAKE_ARGS at the begining of FAKE_MAKEARGS, so that things can be overridden for fake.
Fake fix. This is a strange port, so we're just going to not fake for the moment.
pdflib was updated some time ago. We now have a shared library libpdf.so.8, so lets fix this port
Minor cleanup. removed some stuff from the makefile that the plist does.
Fake fix.
Mark as broken. see pr 42
Lie about OS version.
add gtkperf
Add bonnie.
add blogbench
add iozone
Add flops
Fake fix.
Fake fixes.
Use USE_LDCONFIG.
Fake fix.
The ftyperc change should get a revision bump.
Add .mk files to the ftyperc.
Fix USE_LDCONFIG to work properly with USE_LINUX_PREFIX. INSTALLS_SHLIB is now just a wrapper around USE_LDCONFIG. Consider INSTALLS_SHLIB moved from deprecated to /really/ deprecated.
Use USE_LDCONFIG.
Fake fix.
Updated for gnustep-make 2.
Use USE_LDCONFIG.CVS: ----------------------------------------------------------------------
Use USE_LDCONFIG.
Fake fixes.
Use USE_LDCONFIG
Fake fix.
Use USE_LDCONFIG.
Updated for gnustep-make 2.
Fake fix.
Fake cleanup.
Fake fix.
Fake cleanup.
Fake fix.
Fake cleanup.
Fake fixes.
Fake fix.
Fake fixes.
Fake fix.
Fake cleanup.
Fake fix.
updated to newer version. Fixed install to work properly (not sure how this worked before, seems like it would have always been broken).
fake cleanup.
Fake cleanup.
Fake fix.
Fake cleanup.
updated dmenu
updated wmii
Fake cleanup.
Fake fix.
Fake cleanup. chmod isn't in /usr/sbin, why the plist thinks it is is beyond me.
Update to 3.3.17
Fake fixes for client, server still needs some major work.
Add Mozilla seamonkey! This gives us a newer, secure version of the mozilla suite. For some reason this is easier than firefox.
Fake fix.
Fake fix.
Fake fix. Normalize the pkg-message.
Marked as broken until a path thru this quagmire of faulty logic and terrible practices can be found.
Fake fix.
Fake fix.
*** empty log message ***
Fake fixes. Cleaned up terrible package message.
Include bsd.perl.mk early enough that PERL_LEVEL is defined when we need it.
Fake fix.
Fake fix
Fake fixes.
Fake fix.
fake cleanup.
Use the subfiles mechanism for the pkg-message.
Moved stuff from do-install to the plist. Makes no sense to make the datadir on the box your building the package on.
Fake fix and cleanup. The config.sample logic was all wrong.
Fake cleanup. (nothing broken, just moved some stuff out of the makefile that pkg_add does).
Remove stuff that the makefile did that pkg_add now handles.
add bozo httpd
Add w3c validator.
Add p5-Config-General
Add p5-Set-IntSpan
Add James Clark's SGML parser.
Clean up the SSL message. Use USE_LDCONFIG.
Add google-sitemapgen
Updated to 0.8.5.
LDAP is broken.
Remove a version check, and document why readline is added as a dependancy if readline is installed.
Updated to gnustep-make 2.
start of the firefox port. Right now it build, but segfaults at startup.
add libbonoboui for gnome.
Add libgnomecanvas
Add libgnome. This port is not currently installing the man page and will need to be revisited.
Really fix fake this time.
Various cleanups. bsd.perl.mk should now work with post/pre properly. Fixed an edge case in cached-install where the PKGFILE didn't exist but the package cookie did.
Updated to use the native fake system. Before the port would do its own custom fake dir, then install into the standard fake dir, and then build a package. The port now uses the standard fake dir to make it's plist, cutting down on complexity and build time.
Fake fixes.
Remove post-install target. what it does is in the plist, and pkg_add will run it.
Don't run the pkg-install at post-install.
Add gnome-vfs
Add hal
Add milter-greylist
Add hashcash
Add libvolume_id
forgot to add pciids to makefile
Add pciids, a list of all known pciids. gnome-vfs needs this too.
Add dmidecode to read SMBIOS info and also needed by gnome-vfs
Add policykit, a free desktop component required by gnome apps.
add libbonobo needed by Gnome/GTK apps and fix ordering of makefile
Add vrfy, to verify email addresses.
This post-install target is no longer needed with fake. update-desktop-database is in the plist, and the pkg-install script is run by pkg_add.
Add gstreamer-plugins
Set the arch for AMD 64 properly
Port maintainer was wrong. $MidnightBSD$
Add v4l_compat (video for linux)
Add liboil
Let's get dangerous! This file works miracles. The primary problem with the mozilla port is the JavaScript Engine. This change makes the JS engine work on amd64 provided the makefile is hacked for amd64 instead of i386. make fake isn't 100% yet and make package still fails but if you manually run ./mozilla as root in the wrksrc/fake or possible the fake root (there actually is a fake directory created by the port unrelated to our fake) it actually works! I was able to load mozilla.org with it. Note all i had enabled for the build was DEBUG and the browser. Enabling other things (like ldap) causes it to fail still.
Add gstreamer.
NSS plugin patch.
nss plugin patch. corrects crashes with some protocols.
We added pidgin which is gaim 2 with a name change. Let's make that a conflict and also use newer autotools to work around some isolated incidents.
Fix perl support.
Fix a circual dependancy.
Add pidgin. Note this does not currently make use of GSTREAMER since I suspect we need to update it badly. (good is missing) There are still a few outstanding issues with the libpurple port which this depends on. I'm able to startup pidgin and use it with AIM, MSN and IRC.
Add the /usr/local/lib/libperl.so symlink to the plist. USE_PERL5=yes, so we get all the vars from bsd.perl.mk. USE_LDCONFIG, because we do have a lib in /usr/local/lib.
Perl and SILC support are disabled until we get some issues sorted out. This is a library required for gaim 2 aka pidgin
Remove the pre/post stuff. It doesn't work and probably isn't needed.
Don't cat the PKGMESSAGE.
A few cleanups. Changed to use OPTIONS.
ctriv suggested we switch to TRUE_PREFIX so make PREFIX=/foo works.
Fix a typo that broke USE_PERL5.
Fake fix. This is a terrible way to get a port to fake, and it should almost never been done. However, given the crusty state of BitchX's build system, this may be the best option. This port should NOT be used as a reference for fixing a fake install.
This isn't exactly the best fix, but it does make the shell scripts to start linux-seamonkey work. It should also fix linux-thunderbird, etc.
Add open source version of Lotus sametime protocol. This is *optional* for pidgin.
Security update for Bind 9.4 to 9.4.1 from a Release Candidate. Don't cat pkg message.
Don't run the package installs script at fake time, let pkg_add to it.
use USE_LDCONFIG
Add avahi, an alternative implentation of Bonjour used by many newer open source projects.
Proper fake fix.
Add ez-ipupdate
Preliminary patch to fix make fake and make package. The port now appears to install properly.
Add Python dbus interface. This is required for pidgin (gaim 2)
Add libdaemon, a library for simplifying making a UNIX daemon process. Specifically, this is used by GAIM 2 aka pidgin.
FreeBSD 6 version (lie about os version)
Moved all the perl stuff into a seperate bsd.perl.mk. Fixed a bug where add-plist-docs wasn't fake-aware. A debugging line in fix-fake-symlinks crept into cvs, removed.
Clean-ups. we don't support perl 5.6.x.
Update to 1.85
Minor cleanup for the package message.
use USE_LDCONFIG.
Use USE_LDCONFIG.
Update to 0.2.42. FAKE_FLAGS is going away. Using the trueprefix option instead.
use USE_LDCONFIG.
Use USE_LDCONFIG.
Minor fake fix. Removed useless OSVERSION check.
Document USE_GNUSTEP_PREFIX.
Use USE_LDCONFIG.
Fake fixes.
Mark as broken.
Fake fix.
use USE_LDCONFIG.
I can't seem to figure out why this doesn't build. Mark as broken.
use USE_LDCONFIG.
Don't run the package script.
Use USE_LDCONFIG.
Fake fixes for php extensions. I love it when you can fix 15 ports in one commit.
Minor cleanup.
Fake fixes.
make sure the ruby lib dir is the in the fake dir.
Fake fixes.
Don't cat the pkg-message.
Fake fixes.
Fake fixes. Now using the config framework.
Fake fixes.
add vxtools, Command-line utilities for reading Veritas Filesystem (VxFS)
Add adamem, a colecovision emulator.
Add xhomer emulator. It emulates a DEC Pro 350 computer PDP-11-based machine
Add aftp, a ftp-like shell for accessing Apple II disk images
Fake fixes.
Add yabause, a Sega Saturn emulator.
tiemu2 is a Texas Instruments TI-89, TI-92, TI-92+ emulator! This is very nice as it replaces a TI-81 emulator I used to run in Mac OS 9 for many years. To bad it doesnt' emulate my trusty TI-85 :)
Updated for gnustep-make 2.
Fake fixes.
Add yape, a commodore +4 emulator.
Add libticalcs.
A few other ports were never added to this makefile. Lets correct the deficiency. (yes i watched Spider-man last night)
Fake fixes.
Add libticables, a usb library for connecting ti calculators.
add libtifiles
Do the message in post-fake so that prefix is right.
add dgen-sdl, a Sega Genesis emulator. Gotta add my favorite game console emulator :)
Updated to use USE_LDCONFIG.
xbox iso tool
Clean up pkg-message a bit.
No longer needed with .90
Update to Qemu .90 including a security fix for a recent vulnerability. This version seems to require aio to be loaded in the kernel during testing on MidnightBSD 0.2 amd64.
Update to 5.2.2 which has several important security fixes. See http://www.php.net/releases/5_2_2.php for details.
Update to 1.55
updated for fake. pkg-install is built from peices depending on the options set.
Make FAKE_SETUP a public variable. It should be considered read-only, but it is useful if you need to execute make from a *-install target.
Update to 1.55.
Fake fix.
Fake fixes.
Fake fix and removed unneeded OSVERSION check.
Changed to use the config framework.
We have FAKE_OPTS now.
Cleaned up and faked for fix.
Updated for gnustep-make 2.
Prepare for lua support.
Add boehm-gc
add alisp, a very close to pure implementation of lisp.
Add yabasic, a simple implementation of basic.
add nawk
add mawk.
add esound and libaudiofile for linux emulation. These are required for AIM if you wish to have sound.
Add aol's aim client for linux.
Fake fixes.
Update to 1.2.14
Apparently ctriv updated this port but didn't update the distinfo :)
Add sendxmpp
add p5-Unicode-String
Add p5-XML-Stream
Remove FBSDID from Makefile Add jabberd, the jabber 2 daemon
Fake fixes.
Add pth hard.
Removed more cruft. Much remains, and this still has years of FreeBSD backwards compatibility which we do not need. makeplist should work better when NO_MTREE is in effect.
Updated for gnustep-make 2.
Update to 1.2.0, which happens to also fake correctly.
Add lha-ac
add xar.
add pbzip2. This implementation of bzip2 uses threads to achieve a near linear speedup compressing archives.
Add luna
Add netbeans 5.5
Don't cache the pkg-message.
Fake fix.
Cleaned up fixed paths.
Fake fix.
post-install was failing if perl wasn't installed, which is bad. Fixed.
Fake bug fix.
Put creation of the tmpplist in the exact same spot that fbsd's bsd.port.mk had it, fixing several edge cases with ports that generate their $PLIST. Removed several targets that are no longer used. fix-fake-symlinks was making some extra noise: redirected to /dev/null. Make sure to fix symlinks everywhere when a port installs to both LOCALBASE and LINUXBASE.
Fake fix.
Fake cleanup.
Don't cat the pkg-message in post-install.
fake fixes.
Don't cat the pkg-message.
Fake fixes.
Don't cat the pkg-message.
Updated to 2.18. Fixes for fake.
This has hard coded paths which are evil, but its working.
Remove FreeBSD reference from pkg-message. Comment out the gnome icons in the plist since we don't have the paths anyway. Gnome hier is probably not setup. This modification allowed make package to suceed on amd64.
Don't cat the pkg-message.
Fake fixes.
It appears it was right the first time, back the recursive fix out.
aha.. space after the \ in the url
This whitespace is wrong.
Don't run pkg-install, pkg_add does that for us.
In add cases a recusive var was possible. Fixed.
Make sure to install a lynx.lss file.
Don't need to twiddle the config files on post-install, the plist does this for us.
spaces, not tabs :)
add EMU CS mirror
Updated to work with gnustep-make 2. Now builds and fakes properly.
Typical gnustep-make 2 fix.
Fake fixes.
Update for gnustep-make 2.
Bug fix. make-tmplist was running before pre-install made the plist. This is still a little buggy, as it assumes that $MASTERDIR is readable.
Call make-tmpplist instead of generate-plist for automatic plist, as make-tmpplist includes things like info and ldconfig calls.
gnomeheir needs to be a run time dependancy now as well, as the mtree file is needed for fake as well.
Fake fixes. Call setup.py with the destdir and the proper prefix.
A few minor cleanups. USE_LDCONFIG and don't cat the PKGMESSAGE.
Changes for fake.
Fake fixes. Updated plist to reflect reality.
fake fixes.
Changed to USE_LDCONFIG.
NOPROFILE is deprecated. Changed to NO_PROFILE.
Minor cleanup. Changed to USE_LDCONFIG.
Fake fix.
Fake fixes. The dist makefile will not run 'dot -c' if DESTDIR is set, so we need to do so in a pkg-install script.
Minor cleanup.
A few minor cleanups.
Fake fixes. Changes to this port where rather extensive. It should be considered "beta" until further testing is conducted.
This is still not right. The pkg-plist changes creates the directory now for the files that are generated after install. the chroot is still failing (permisions might be the issue) and deinstall gives an error since the generated files are there. I could switch it to dirrmmtry to get rid of the error but it wouldn't actually delete the files then.
Presuming the install step works this is fixed. I'm still seeming weird permissions issues though.
Step 1: Make a pkg-install script instead of post-install
This *may* fix the problem with installation.
Change generated run script path
Fake fixes.
plist fixes
Add intel's "linux" c++ compiler version 8.1. This is setup to build native MidnightBSD binaries. A free license is available for non commercial use or you may purchase it.
Update to 2.0.0.0
Icons are in LOCALBASE now, not X11BASE.
Add gnome-mime-data
Add p5-File-Which for p5-Archivers-ZIp
add p5-archive-zip
Add GNU patch. Our version of patch in src is ancient and has some FreeBSD local patches.
Lie about OS version.
*** empty log message ***
Remove the ?
Add impress, a WYSIWYG publishing tool
Add 2bsd-vi. This is the original vi. It is very small and simple. Due to our ports changes, this was almost a complete rewrite of the port.
add dvdbackup
add dvdbackup.
Fake fix.
Fake fix.
Fake fix.
YAFF (Yet Another Fake Fix).
Fake fixes. (More I think).
A few cleanups.
Minor cleanup. No reason for this port to make that dir.
Fake fixes.
fix-fake-symlinks failed when there where no symlinks in the fake dir: fixed.
Fake fix.
don't need to copy the config in post-install, pkg_add does it for us (see plist).
update for gnustep-make 2.
Various improvements.
When installing dependancies, an attempt is now made to install the package
${PKGFILE}. If that file is not in ${PACKAGES}, then the port is built as
per usual.
At the end of fake sequence, any symlinks in ${FAKE_DESTDIR} that point to
a file via an absolute path into ${FAKE_DESTDIR} are fixed to point to the
correct file.
Various cleanups and bug fixes. refake no longer complains if fake was
never run.
gnustep-make 2 dropped library_paths.openapp.
cleaned up pkg-message.
Minor cleanup.
fake fix.
Fake fix.
fixed up pkg-message.
Refactored to use SUB_FILES.
Refactor to use SUB_FILES.
Refactor the pkg-message to use SUB_FILES.
Fake fixes. Changed INSTALLS_SHLIB to USE_LDCONFIG.
Cleaned up the package message.
Fix bugs with USE_LINUX. It was set to a run depend, but it should be a build depend. Fix .ORDER for parallel builds.
Fake fix.
Don't cat the pkg-message. Removed some OSVERSION checks.
Fake fixes.
Fake fix.
Don't cat the pkg-message in port-install.
Stomp out another USE_LDCONFIG bug. Both cases are now tested to work correctly.
don't can't pkg-msg in post-install.
We don't need to print this anymore, pkg_add does.
Fake fixes.
Fake fixes.
Fake fixes.
Set NO_MTREE. As this port supplies the linux mtree file, it certainly can't use it. (well we could have set it to the file down in FILESDIR, but this works just as well).
Move makeplist to the end so that all the vars are defined. Update MTREE_LINUX_FILE to the new location. USE_LINUX no longer implies NO_MTREE, as we are going to have an mtree file for each linux-base.
Cleanup to work with fake.
Removed linux mtree file. This is now part of the linux base port.
Make the mtree file part of the port, and install it into $LOCALBASE/etc/mtree/. We'll have to do the same for gentoo at some point, but that's not a big deal.
Rip out a bunch of checks for old versio of freebsd.
Bug fix. The pkg-install script was getting the fake prefix, not the true prefix.
Cleaned up some. We don't need to run the install script anymore, pkg_add will do that now. This was also writing outside of $WRKDIR, a big no-no.
Fixed and cleaned up ldconfig configuration file magic. Added refake target.
Cleanup a little version checking crud.
Make the pkg-message work with fake.
Fake fix.
Fake fixes.
Minor cleanup. pkg-mesg's no longer need to be cat'ed by hand.
Updated for gnustep-make 2.
A (rather clever) fake fix.
Fake fixes.
Fake fixes.
Fake fixes.
library_paths.openapp is no longer used by gnustep.
Fake fix.
Only make the cups model dir if we're building with cups support.
Fake fix.
Fake fix.
Fake fixes.
pre-su-install was being done before pre-install, which is wrong. Fixed. A bit more cookie cleanup cleanup.
Fake fixes.
Fake fixes. LD_CONFIG crap can be removed from the install sequence, as pkg_add runs this for us (provided that the plist is correct, which in this case, it is).
---------------------------------------------------------------------- gnustep-make 2 cleanup.
Fake fixes.
The commands should be set to LOCALBASE, because a mod might have an odd prefix, which would not be the same prefix as your ruby install.
Fake fixes.
Fixes for fake.
Cleaned up some paths that were hard wired to $LOCALBASE that should have been set to $PREFIX.
Add KMODDIR to the variables faked.
Ripped out some old OS version stuff.
Fake fix.
Ports don't need to cat the package message at post-install anymore.
Fake fix.
Fake fix.
Update gnustep-back version.
Run pre-su-install as well as pre-install. Warn that pre-su-install is deprecated.
This port depended on misc/hicolor-icon-themes which now installs in /usr/local instead of /usr/X11R6.
$MidnightBSD$
Remove some OS version checks. Still broken with mport
Update plist to work with gnustep-make 2 paths. This port has been tested under bsd.mport.mk.
Fake fixes.
Fixes for fake.
Make sure that PREFIX is still twiddled with for {pre,post}-install if the
trueprefix FAKE_OPT is set.
Don't delete the package cookie on make deinstall.
Upgrade to 0.12. Works with fake.
Forgot the new distinfo.
Updates for fake. Upgraded to 0.12.
Revert to 3.3.7 until i figure out the problem with qt 3.3.8
Update qmake to 3.3.8. This port works with mport, but the full qt install does not.
Remove alpha bits.
Fixes for fake.
Fixes for fake. Opera has some significant heuristics for icon installation, which break down for fake. We just install the icons we want by hand, heuristic is a fancy word for "doesn't work."
Fake fixes.
Fix maintainer. Remove unsupported architectures. Remove os version checks.
Fake fixes.
Update to 1.14. Fixes for mport.
Update to 2.0. This gives us DESTDIR support.
A few minor cleanups.
imake ports need USE_X_PREFIX for now. (manpages)
fixes for mport.
fix for mport. The post-install target is no longer needed. pkg_add will run the install script for us come make install time.
USE_IMAKE now implies USE_X_PREFIX. imake ports seem to be hardwired. A few other cleanups.
Add afterstep. Unfortunetley, this port uses X_PREFIX because of its MAN PAGES. After bsd.mport.mk is fixed, we might be able to switch this to /usr/local
Kyle's mom is a dirty... oh wait. This actually works now.
Path of WPrefs.app was changed but the plist was not updated. This fixes the path which also fixed make package.
Fix for fake.
Update to prerelease 28.
Update lynx to 2.8.6. Also removed the GPG checks which are useless.
Added new options for FAKE_OPTS: trueprefix. This is for ports that let you override both DESTDIR and PREFIX. Most ports don't do this, but if something is trying to install to $DESTDIR$PREFIX, and you get silly long paths, this is the option you need.
Fake fixes.
devel/gnustep-make: fake fix.
Bug fix.
Some ports expect the temp packing list to be present during
{pre,post}-install. We were doing it before 'package', which caused
problems. The temp plist is now made in the begining of the 'fake'
sequence.
add ruby-gnustep
add kismet
Remove freebsd 5 checks
add gdl2
add aircrack-ng
add aircrack.
add freeradius, a popular radius package.
A security vulnerability was found in clam antivirus today. This updates to 0.90.2 which is not vulnerable.
xdesktopwaves added
Hard wired to X_PREFIX. All imake ports might have to be this way. Time will tell.
Fixed RC scripts. Minor bug fix where MAKEARGS wasn't propogated to FAKE_MAKEARGS.
Fake fixes.
Fake fix: devel/qmake
Fixes for mport.mk.
Remove some needless OS version stuff. Checked to work under mport.mk
Fix the man symlink issue properly.
Fixes for MANCOMPRESSED. This needs to get refactored more.
secpwgen added
updated mandir location and pkg-plist - works with new bsd.mport.mk
Break xine for bsd.mport.mk. bsd.port.mk will work again.
Break xine on bsd.mport.mk, but fix it on bsd.port.mk. USE_X_PREFIX is needed right now. Until we can fix this port, its best to leave it working for end users (and me).
Update libxine port. Unlike FreeBSD, we still need the gcc 4.1+ hack on amd64. This needs to be investigated. Perhaps 3.4.6 would fix the problem?
Update speex to 1.21b. Remove unneeded os version checking from jack.
updated for new mports process
Disable x264 until we get it ported.
This could have been very useful early when dealing with cvs. Bison 2.3
added pkg-descr for archivers/php5-zlib
Added pkg-descr for archivers/php5-bz2.
Symlink fixes for makeplist. Turned down the noise some for fake-install.
Added makeplist target. This is currently undocumented, and missing several features, notably symlink support.
Updated to not include ${LINUXBASE}
Various cleanups.
Adding support for Intel i945GM cards into dri module. Essentially, the dri code was not set up to recognized a card ID of 0x27A2.
add searchmonkey, a GTK based graphical file system search utility.
add linux-seamonkey-devel
update to 3.11.4
update to 3.11.3
add missing patch
add py-cairo. Update cairo to 1.4.2
add py-gobject.
add py-numeric
add nextgo
add codeeditor, a GNUstep non RTF editor
add for a gnustep app
Fixed icon dir.
add gnustep-cdplayer
add libcdaudio
add cddb-bundle
add popup
add toolbox and toolboxkit
add yap
add fortunate
add a2ps for a gnustep app
add latex-service, a GNUstep based port.
updated dmenu
updated wmii
add linux-blackdown-jdk14. This appears to run on AMD64 OK. It might be nice to have an additional jdk in case we ever lose the FreeBSD native jdk.
Remove directions for "FreeBSD commiters".
add qmake4
Correct configure script to use ${CONFIGURE_SCRIPT} instead of configure.
add automake 110
add autoconf 261
Portlint fixes. Remove some HTML documents. Update the plist
move portlint(1) to ports-mgmt part 2 of 2.
Move portlint(1) to ports-mgmt part 1 of 2.
Fixed for bsd.port.mk too.
add a weak pkg-descr
comment out pkg-descr
Fixed stupid bug with bsd.port.mk.
FAKE_TARGET was hard wired to install, it should be ${INSTALL_TARGET}.
Fixed.
Fixed minor logic error.
fixed to work with fake.
Added FAKE_OPTS, for common things like "I need to talk to the port's libs during fake", or "I need the binaries" Fixed info. Fixed SUB_FILES. Various tweaks.:
Added missing do_cleanup_manpath()
This is temporary. Eventually the linux base installers should make this at install time, perhaps spamming /etc/make to set MTREE_LINUX_FILE.
Remove some FreeBSD specific os checks.
Various bug fixes. imake now works properly. linux ports now see /compat/linux in their fake dirs. you can now move FAKE_INSTALLDIR upwards from $WRKDIR, and make clean will still delete it.
get rid of some FreeBSD 5 checks.
add mbone.
add lzo
add gsm
add xanim
Put the fake-dir a level up, this way we don't make a loop.
add gdome2
add ladspa for mplayer.
We don't have tcl/tk 81
add tkstep80
Port was not properly building the .so file. Fix configure script so that it *knows* about MidnightBSD. Some of the other tcl versions have already been fixed.
Fix the configure setup.
add faac for mplayer.
add for mplayer
add tkshape
add tkdnd
add restriction.. "based on MP3"
add libmpcdec for mplayer. Based on mp3 algorithms so we should check on licensing... probably can't redist...
add tk85-thread
add tk85
for mplyaer
add yasm
add twolame for mplayer.
Update lame to 3.97.
add tcl85 ports.
add rtc for mplayer.
Update skins to work with updated mplayer port.
Update mplayer
add tcl84-thread
Lets do a little cleanup work. Add some new versions of tcl and tk since we're working on porting those.
updated libixp to use new system - bumped portrevision
add tk84-thread
add tk83
curl version was recently updated.
add tk82
add tk82.
add the old plugin
add linux-pam-docs.
add linux-openssl
add linux-flashplugin9 and linux-mplayer-plugin which contains the nsapi framework
add dummyflash
add linux-aspell for linux-opera.
add linux-opera
Fix a couple comments. (s/^.*#/#/)
Fix for fake.
Opera will now install on x64. Removed static qt Opera option as it conflicts with our propolice patch. Instead of doing a hack, it just makes more sense to use qt. This should also install some of the files into /usr/local instead of /usr/X11R6...
importing unclutter into mports: unclutter removes the cursor image from the screen so that it does not obstruct the area you are looking at after it has not moved for a given time. It does not do this if the cursor is in the root window or a button is down. It tries to ignore jitter (small movements due to noise) if you have a mouse that twitches.
make install now creates the package that make package built. This is the first alpha version.
amd64, localbase, shared library is default.
Sync this with the qt version bump
Various fixes:
- Wacked use.perl completely. This is no longer needed as we don't have
perl in base.
- A new script, pkg-glue handles some misc pkg stuff that use.perl used
to handle.
- fixed PLIST_SUB, the generated plist is now correct.
- rolled pkg-plist back to older version, this now works because PLIST_SUB
has been fixed.
- Removed pkg-message. Not needed because the knobs are now handled with
the options framework.
A few minor cleanups. PKGFILE is now ALWAYS in /usr/mports/Packages/All (unless you're silly enough to override it of course...)
reworked fake system. Somewhat similar to Open's now. Most ports should build correctly into their fake dirs now, though we'll have to check all the ports... make install is not yet up to speed with the changes, so users are still advised to use bsd.port.mk.
fixed DESTDIR support. We're going to be doing this a few times I think, as DESTDIR support is required for the new mports system. DESTDIR is used to tell the dist's makefile that although the prefix is still /usr/local, we're going to install somewhere else for the moment. See: http://www.gnu.org/prep/standards/html_node/DESTDIR.html
fix OSREL
Updating the pkg-plist on perl so that the package will build and install correctly. Please test and provide feedback.
minor changes.. freebsd6.0...
fix paths
/usr/mports
add isc mirror
add nano
Update joe to 3.5
add joe2
add gentoo linux base ports.
add kqemu kernel module
add libmspack
add proftpd for weird people.
add mirror
add kwebget
add greed
add wu-ftpd with the ipv6 patch
add wu-ftpd
add lukemftp
Add FTP.app, a GNUstep based FTP application.
Get rid of port revision. It doesn't make sense here.
add ncftpd
add ncftp3
update c-ares to 1.3.2
add ncftp2
Update curl to 7.16.1. This is a dependancy of many things including clamav.
Added new variable: NO_STACK_PROTECTOR. If set then propolice stack smashing protection is disabled. Changed many of the TMPDIR names to FAKE so OpenBSD folks can pretend to know what's going on.
Added new variable: NO_STACK_PROTECTOR. If set then propolice stack smashing protection is disabled.
Update clamav to .9. This port only works with libthr. libpthread causes crashes, and other strange behavior due to the unusual use of fork in this app.
Update phpMyAdmin to 2.10.0.2
Update to 4.1.22
MySQL 5.1.16 beta
add scrollkeeper
Update to 5.0.37
Update to 3.0a4pre 2007 03 31 alpha version.
Clean up PLIST_SUB. ZSH_ETC was just wrong, and the site functions dir was broken for packages if it was inside $PREFIX.
Fixed a nasty bug that broke pkg_delete. Our tmp prefix wasn't recognized as one of the "standard" prefixes, so the packing list was setup to delete the prefix. Only problem is that the prefix for the package itself is the default prefix, which is something like /usr/local or /usr/X11R6.
Added devel/activitymail, an excellent perl script for sending CVS check-in emails.
Moved to /usr/local from /usr/X11R6.
Updated to .28.07. Patch Build.pm to recognize midnightbsd as a unix system.
package target now no longer installs the port onto the system. Instead the port is installed in $PORTDIR/$TMP_INSTALLDIR, and a package is made from that. Note that this code is probably not the final version, but care has been taken to make the changes small, as to not reinvent the wheel. New wheels are so bugy. All ports /must/ honor PREFIX for this to work.
The very begining of bsd.mport.mk. Right now there is very little difference between this and bsd.port.mk. There is a new target, tmpdir-install, that instals the port in a temporary directly. make package depends on this now, but given that the package target hasn't been updated to work with the tmp dir, make package is broken. Also, TMP_INSTALLDIR needs to be moved up to the top, with the rest of the vars. The port makefile in general needs to be refactored. It is close to 6000k lines long, and real bitch to work with.
geany IDE added to devel
Adding tmsnc to mports
Adding ratpoison files
Adding ratpoison to mports
Added p5-DBD-SQLite
Moved to /usr/local
added -a flag to check all ports. You need to run make index in /usr/mports before you can use this.
Moved to /usr/local. Marked as broken: fetch fails.
Moved to /usr/local
Moved to /usr/local. Marked broken: fetch fails.
Moved to /usr/local (untested).
Moved to /usr/local. This is UNTESTED (can't seem to find the package on sun.com); but it should work.
Moved to /usr/local
moved to /usr/local
Moved to /usr/local
Moved to /usr/local
Moved to /usr/local
Moved to /usr/loacl
Moved to /usr/local
Moved to /usr/local.
Moved KDE stuff to /usr/local
Moved to /usr/local
Moved to /usr/local
Moved to /usr/local
Forgot to ++PORTREVISION
Forgot the PORTREVISION++
Moved from /usr/local
Moved to /usr/local
add BitchX irc client.
add irssi-scripts
Fix some missing files in the plist
Update to 1.5.0.10
Moved to /usr/local
Moved to /usr/local
Fixed and moved to /usr/local.
Moved to /usr/local
Moved to LOCALBASE.
Removed X prefix.
de X prefix'ized.
Removed X prefix.
Removed X prefix. This is untested, as I do not have java on my box at the moment, but it should work just fine.
S/USE_X_PREFIX/USE_XLIB/
deXPRFIXized.
Removed commented USE_X_PREFIX (it was giving my searching tools a false positive.).
DeXPREFIXized.
deXPREFIXized. BSD.gnome-x11.dist might still need tweaks.
Firefox 2.0.0.3 I want to revisit, cleanup this port later but the security issues in recent firefox versions have encouraged me to get this in now.
dont' forget the wrapper.
add old tcl versions for mbone
Useful for mbone apps...
an alternate boot loader.
Update dovecot to 1.0 RC 27... the author claims its really close to a release now. I'll believe that when I see it. Regardless, there have been some interesting mbox fixes I'd like to have.
add pecl-imlib2
add p5-Sys-Hostname-Long
more spam assassin stuff.
Just a fend spam assassin related ports.
add p5-Parse-Syslog
add p5-Net-CIDR-Lite
add ruby-bdb1
Change to MACHINE_ARCH
add GraphicsMagick
add p5-IP-Country
another little tidbit for stargazer
add libwmf
p5-Geography-Countries is handy and needed on stargazer.
add p5-Date-Manip
add p5-Image-Magick-Iterator
Add p5-Image-PBMlib
*** empty log message ***
*** empty log message ***
add p5-HTML-Tree
Remove X prefix.
Remove X prefix.
Remove X prefix.
Remove USE_X_PREFIX.
Remove USE_X_PREFIX.
Install in /usr/local, not /usr/X11R6
Update mksh to R29.
Fix for prefix changes. Still needs upgrade to 3.3.8
Fixes for xprefix logic. These ports now install into /usr/local.
the gnome mtree is now under LOCALBASE.
Changes for cleaning up /usr/X11R6. USE_IMAKE no longer implies USE_X_PREFIX. USE_X_PREFIX no longer implies USE_XLIB. Support for XFree86 has also been removed. /use/X11R6 should only contain xorg, everything else should be installed in /usr/local. These changes make that possible, but some ports will need twiddling. The most common problem is that a port has set USE_X_PREFIX, this used to mean the port got USE_XLIB for free. 99.9% of the time, changing USE_X_PREFIX to USE_XLIB will fix the port. USE_IMAKE usually will need USE_XLIB to be added. USE_XLIB now goes to extra steps to make sure that a port will see the xlibs.
Added chkxprefix.pl; a simple script to check if a port and its dependcies don't have an /usr/X11R6 prefix.
Added MASTER_SITE_GNUSTEP_CH; which etoile-camaelon needs.
Finally we have twig.
bugzilla has too much cpan shit.
Getting there...
well get bugzilla's depends right sometime
Add XPath
add p5-Tie-IxHash
Add p5-Text-Iconv
Fix maintainer, some minor cleanup
Get rid of the chinese reference. We don't have the category and won't have i18n for china for a long time.
Add gv
Fix pkg-plist. When we upgraded qt, we didn't look at the plist.
Convert to XHTML. Fix documentation references for ports.
We don't have portsnap.
first two mirrors were broken.
s/Free/Midnight
"Modernize" the file a little.
Fix configure target.
linux-libogg
Non functional change.
fix configure target.
Added netatalk.
Added net/netatalk.
no interbase
add mysql-connector-java which is a jdbc driver for MySQL.
add log4j
add jboss4
add kuickshow
add this for kde.
add gozer
add goom
*** empty log message ***
Add bind94
The samba port had a bad plist which caused some problems building packages among other things.
Get rid of INSTALL SHLIB
Add fvwm2
new pkg-plist since we're using KDE 3.5.4
kde users like screen savers too.
add gnash, a gnu flash player alternative.
Add gtkglext
remove alpha bits
Cleanup
We changed the ports path.. lets fix this to avoid the annoying errors.
x-servers/xorg-servers now have these patchs, which are included automagically.
Fixed for new freetype2 port.
add addresses-goodies
cleanup
Perform a little cleanup
Make portlint a little happier.
update NVIDIA binary driver. Eventually this won't work on MBSD anymore, but for now we should try to stay current with it.
Fix build for new freetype2 port.
Bump PORTREVISION.
Fixed by importing changes from FreeBSD's port.
set the configure target to freebsd 6.. freebsd 0.1 is a bad thing.
it appears archite was intending to cvs remove these but forgot to. This should fix the port.
This will give us less nagging.
Update gzip to the most recent version we can find.
update plist
Update gtar to 1.16.1
Update pkg-plist for the additional directories we're creating.
Create several needed directories. Add gnustep category. Logically reorganize.
Revise pkg-message to properly describe sourcing in csh
Connect Cairo. USE NO_INSTALL Add gnustep category New option WITH_GNUSTEP_SINGLE_BACKEND
bsd.gnustep.mk && gnustep category
update for gnustep category/bsd.gnustep.mk changes.
Add gnustep category
Remove ia64 restriction in case we ever want to work with that architecture which seems unlikely. Adjust to make sense of new bsd.gnustep.mk changes.
Change aspell port to textproc/aspell instead of the german version.
Add gnustep category, add WITH_PORTAUDIO2 option.
add portaudio2
add gnustep category
Add gnustep category
Add category
correcting Makefiles
Importing mozilla into mports
I need to start bumping these :)
The URI changed.
Updating freetype2 port
updating plist for linux-firefox port
update to legal-packages script
add obconf
add etoile
add etoile-io
add etoile-babbler
add etoile typewriter
add vindaloo for etoile
add etoile
add etoile-ogrekit
add etoile-lucenekit
add for etoile
add etoile-installer
add popplerkit
add etoile wms
add etoile-foundation
add etoile-collectionkit
add etoile ports
add etoile-iterm
add etoile ports
add etoile-dictionaryreader
add more etoile ports.
add etoile-menuserver
add etoile-behavior
add etoile-system
add etoile ports
Add etoile-unitkit
add etoile-ui
Add etoile-trackerkit
Our first part of etoile.. about time!
Add TZUPDATE
Add TZUPDATE to handle DST
add linux-sun-jdk13
Add linux-sun-jdk13
Update to 1.4.2_13
Update to jdk 1.5.11. With recent DST changes, its not a bad idea to get current with java. 1.5.8+ should be ok.
Remove Makefile hack
Sync with changes in FreeBSD. We want to get away from doing this but so many ports have been added to FreeBSD since December, its just easier to start with them. This should allow us to get rid of some of the hacks we've done
app depends on lynx for certain operations.
Remove alpha bits.
add gnustep-ticker
add bookmarkbridge.
add dillo
add dillo, a web browser.
Update seamonkey to 1.1.1
Adding wmbsdbatt to mports
add Live Journal command line client.
correcting maintainer in gaim Makefile
add template toolkit for perl
Add p5-Template-Toolkit
add p5-Al..
add p5-Text-Diff
add p5 depends needed by bugzilla.
add p5-GD
add razor-agents
add pantomime
add bugzilla
add p5-ExtUtils-...
add p5-YAML
add p5-Spiffy & Test-Base
add p5-Image-Size
add p5 ports
add p5-Archive-Tar
add
add p5-Module-Build
Add p5-Image-Info
add p5-XML-Simple
add SAX Expat
add XML SAX for perl
add p5-XML-NamespaceSupport
add
add p5-Text-Tabs+Wrap
p5-Text-Reform
add p5-Text-Autoformat and its dependancy
add p5-Pod-POM
add p5-Data-Dumper and p5-PatchReader
add p5-TimeDate
add p5-Date-Calc
Add p5-Bit-Vector
add p5-Carp-Clan
add p5-AppConfig.
Add p5-File-HomeDir
add p5-File-Temp
add p5-CGI.pm
Update WINE to fix several bugs with directx emulation
OpenSSH 4.6p1
add vMac
Update to .70 which was released March 8, 2007
add basiliskII
add esound
add dosbox
add pearpc
This so is more like a binary than a shared library so we'll brandelf it.
add blas
add R
add gnumail
add gworkspace
add cpuid
add xtail
add more dock apps
add libical
Add several dockapps for windowmaker
add windowmaker-desktop, a meta port to install windowmaker and some goodies.
add wmweather+
Add Hermes
add wmweather
Add windowmaker category
add wterm
add xscreensaver.app
add xscreensaver
add xlockmore
Update dovecot to r24. We skipped r23 which apparently had cpu spikes when PAM was used.
Update bsd.gcc.mk to handle gfortran in newer releases.
remove old patch
Update gcc 4.2 snap. gfortran42 :)
add php5-snmp
add php5-sybase_ct
add php5-wddx
add
add php5-sysvshm
add php5-sysvmsg
add libglade2
add pecl-yaz
add yaz
add mpfr
add dvipdfmx
add
add adobe-cmaps
add ttf2pt1
add freetype-tools
add freetype
add t1utils
add urlview for mutt
add doxygen
add graphviz
add tmake
Add bind9
add p5-Net-DNS
add p5-Net-IP
add p5-Math-BigInt
add perl ports.
add p5-Socket6
add p5-IO-INET6
Fix php5.2.1 compatibility.
Update to Firefox 2.0.0.2. This is a security release.
add p5-libwww
add p5-Net
add p5-Authen-SASL
add p5-Digest* ports
add p5-GSSAPI
add perl 5 related Zlib ports.
add p5-IO-Compress-Base
add mbmon
Add mbmon
Update qstat to 2.11
add qstat
add qstat.
oops forgot to commit this.
updated php to 5.2.1. Don't need this.
Update to 2.1.x
Update to 7.x
Make a few corrections
update php to 5.2.1.
update to 224
Update xterm to 223
bump portrevision
$MidnightBSD$ New background.
We don't handle GNOME_SUBR yet.
Adding sendmail to mports
fix typo.
$MidnightBSD$
add courier-authlib-userdb
add rxvt
add lrzsz, ltmdm (lucent winmodem driver), and minicom.
add tin.
add uulib
add popd
add xchat.
this is not the latest version of xchat, but it does work.
add dbus-glib
add dbus
add xv
add mtools
add astro category.
add astro
add courier-authlib-vchkpw
add
add vpopmail
add ucspi-tcp
add qmail.
add couriergraph
add p5-file-tail
add courier-pythonfilter
add courier python filter.
add courier-imap
add courier imap
add courier
add courier mta...
add p5-Net-CIDR
Update to 3.39.1
Adding new ispell files
Removing old ispell files to get new version in
Updating ispell port to later version so that it installs.
fix maintainer.
add courieruserinfo.
add courierpasswd.
add courier related ports.
add courier authlib, and courier authlib base
add procmail.
add procmail
add sysconftool.
change to ftp...
add gnustep mirror.
remove sites which have closed down.
remove ftp.xemacs.org which has broken passive mode.
Provide TCL_VER when USE_TK is defined.
add gnustep and ports-mgmt categories.
Remove ancient linux_base for redhat 7
Remove unneeded PARALLEL_PACKAGE_BUILD check.
*** empty log message ***
add || true to silence @unexec rmdir
Use set == instead of set for better robustness
Avoid :L modifier in ${USE_LDCONFIG} which could break /usr/X11R6 ports
Correct comments.
Force passive mode for FTP. This is default in the login class anyway.
Add PKGVERSION and definition for USE_WX
add quotes in missing:
update to a more recent version.
Fix $MidnightBSD$
update to 1.18...
update to 1.4.10 which is the latest.
Update msmtp to 1.4.9
Update fetchmail to 6.3.6
Update Dovecot to RC22 for 1.0.
Correcting error in Makefile
Adding 915resolution to mpports
Updating Makefile to include ipw-firmware and iwi-firmware
Adding ipw to mports
Adding iwi to mports
remove portupgrade as its moved...
move to ports-mgmt
remove portupgrade and portsearch as they are moved to ports-mgmt.
add category makefile
add portsearch
add portupgrade to our new category
add new category ports-mgmt
add sqlclient and sqlite3 (dependancy).
MidnightBSD...
The distinfo file contained entries only for a server install.. the docs and client failed. Since I had to work on this port a bit, I just updated it to a recent version. make(makesum) checks were added to help generate make distinfo with all the combinations. Make package succeeds now, and initial testing looks ok, but we'll need to run this through more tests. This at least unbreaks the port in some cases.
libgpg-error was bumped.
libgpg-error was bumped.. we need to fix it here.
add the qt-shared version.
add highlighterkit.
add performance, a library to subclass generic gnustep/cocoa classes for performance benefits.
add wizardkit
add objective-c unit
add gtoolkit
Add gnustep based preferencepanes framework.
add guile and gnustep-guile.
Add USE_GNUSTEP_MAKE to require GNUstep.sh for build and install.
Update Python to 2.4.4
add samba-nmblookup
Add missing files from 3.0.24 commit
Update Samba to 3.0.24. 3.0.24 is a security release which fixes several issues including CVE-2007-0452, CVE-2007-0453, and CVE-2007-0454.
add dmalloc
add zillion.
Add GNUstep based webserver
add bsdstats. This reports BSD usage to a bsdstats.org to help convince hardware vendors that BSD users exist.
Make a few logical changes.
Add joe for chris :)
BIND 9.3.4 contains security fixes: 2126.[security]Serialise validation of type ANY responses. [RT #16555] 2124.[security]It was possible to dereference a freed fetch context. [RT #16584] 2089.[security]Raise the minimum safe OpenSSL versions to OpenSSL 0.9.7l and OpenSSL 0.9.8d. Versions prior to these have known security flaws which are (potentially) exploitable in named. [RT #16391] 2088.[security]Change the default RSA exponent from 3 to 65537. [RT #16391] 2066. [security] Handle SIG queries gracefully. [RT #16300] 1941. [bug] ncache_adderesult() should set eresult even if no rdataset is passed to it. [RT #15642] If you are running a BIND 9.3.x or BIND 9.4.x version without these changes you are advised to upgrade as soon as possible to one of BIND 9.3.4 or BIND 9.4.0rc2.
Add p5-Net-Server
KDE Multimedia and KDE PIM do not currently work. Disable them for now until we get them working. KDE PIM requires a shared library in mports/palm/ and KDE multimedia is dying on the ogg plugin as a union is defined in a system header file which supposedly shouldn't be although its included in the GNU library.
add gocr
add arch
add sane-backends
GNU ghostscript will not be supported. Plan B.
add jadetex
add kooka
add libunrar
Forgot to add the category makefile!
add php5-xsl
Add rrdtool and its php5 glue :)
add php5 sockets and xmlrpc
add php5-soap
add tk84
Add tk84 with fix for shared libraries.
Testing causes long delays on some architectures. Shared library was not built before. This was corrected.
add polypaudio
add tcl84
add docsis for cable modem encrypt/decryption of config files using the DOCSIS standard.
add akode and its plugins.
add net-snmp4
Add kdegraphics3. There are a few side dependancies that need work.
This should have been imported in november.
add libsamplerate
add libsamplerate for a kde dependancy
fftw3 added.
net-snmp
Add net-snmp
Add kde admin
Add kdeedu3
add the kde edu stuff
add boost/boost-python
Add boost
libcaca added
liveMedia added
php5-shmop added
php5-recode and recode added
php5-readline added
php5-pspell added
Don't forget the category makefile.
add preferences.app
add linux-sunbird
add sdk and mdbconv
*** empty log message ***
Fix build
Add xdvik and teTeX
Add open-motif (Finally)
add kde graphics kamera app
add dvipsk-tetex
add libgphoto2
Add cm-super for teTex.
Add some palm ports.
forgot something :)
add palm
add for gnupg
Update to 1.4
add libksba
Update gnupg and add libassuan
Add pth
Add gnupg1 and gpgme
add teTeX base
Add p5-HTML-breadcrumbs...
Add kde web development
Add mports for teTex-base and KDE graphics.
Add p5-type1inst to install x11 fonts.
add meta port.
Add poppler-qt for kde.
Add poppler, a xpdf fork used by KDE.
php5-pcntl added
php5-odbc added
php5-ncurses added
updated wpop3d to 1.2
php5-ming and ming added
php5-mssql added with its depends
cscope added
Woo hoo
add kdevelop for those kde types :)
Accessibility is a good thing.
Add libwpd for koffice
Add kdesdk3
for kde
Add taglib for kde
Add cdparanoia
add wv2 for kde koffice
Add more gnome crap
mbsdize it
Woo hoo ... more gnome for kde fun
Add gnome crap for KDE crap... i love dependancies on the other bloatware...
add kdetoys 3
Add for kopete
Makefile added
Add kdenetwork3
Add for kde koffice
Add link for kde.. even though its part of gnome...
Add libpaper
Add kdeartwork for kde
php5-imap added with depend cclient
Add libfpx for imagemagik for kde
add mpeq2code for imagemagik for kde
pecl-zip added
libexif for kde
Add for kde.
Add openslp for kde network port
php5-gmp added
add for kde's koffice.
Add kdeutils3
php5-ftp added
pecl-fribidi added
pecl-fileinfo added
php5-exif added
php5-dba added with its dependencies
php5-dbase added
php5-curl added
php5-calendar added
php5-bcmath added
php5-extensions minimum support added
php5-sqlite added
php5-tokenizer added
php5-posix added
pecl-PDO added
php-iconv added
missed a file
added textproc php5 bits
php5-ctype added
fribidi added
lirc added
added libirman to comms
Add kdegames
add kdegames
Add working portions of KDE3 to mports.
Add additional patch file.
Update slim to fix some memory leaks.
Update to Apache Tomcat 5.5.20.
Add missing patch.
Update Apache to 2.2.4.
libdv added
fotaq added
bass and scummvm added
Remove WITH since we've got working bsd.port.mk now
make a default for the non x11 case.
Remove ghostscript-gnu as default for this port. We don't include ghostscript-gnu anymore as it was broken in most cases.
Remove ghostscript-gnu conflicts
Add ghostscript-afpl.
Fix typo.
Typo.
Missing imlib2
Typo
The net category was flat out missing.
Typo.
typo
bring in more options as supported in FreeBSDs ports
retsina added
p5-HTML-Tagset added
p5-HTML-Template added
missed a file
removing broken port ghostscript-gnu
added more cups stuff
made ghostscript-gpl default gs version
physfs added
openal added
ghostscript-gpl-nox11 added
Add httperf
Add postmark
Add netpipe
Add py-fileutils
Add python file utils package.
Add gawk.
Add netperf, a network benchmarking tool.
squid added
Update port version of BIND 9 to 9.3.3. This will allow testing before inclusing in the base system.
$MidnightBSD$
Add MidnightBSD ftp to master sites.
Add ghostscript-gpl which compiles provided X11 extensions ports are not installed.
furl added
forgot to bump PORTREVISION
updated pekwm to install under LOCALBASE and not X11BASE
changed install from X11BASE to LOCALBASE
siege added to new category benchmarks
nodebrain added
fixed MASTER_SITES to use new EASYSW
added EASYSW entries for cups
updated cups-base to 1.2.7
Add stlport for a personal project i'm working on.
updated wmii to 3.5.1 and added dependencies libixp and dmenu
update openvpn to 2.0.9
gtypist added
motor added to devel
updated cherokee webserver to 0.5.6
Add softflowd, subcalc, sysmon and tas.
Add linux curl
Add ncftp
Add category
Add tcpreplay
Add libpcap
Add BPF traffic grabber
Add wep lab
add whatmask
Add yabm
Add cvsup without x11 graphical interface
fping: ping multiple hosts simultaneously
Pure Perl snmp
Add p5 Mon
Add cisco config file parser
Add p5 IO String
Add p5-Cflow
Add Net Management
Add Network Management
lighttpd added
updated postgresql 8.1.4 to 8.1.5
Update linux thunderbird to a new version.
abook added
Update to Opera 9.1.0
Update Mozilla Seamonkey to the last release available on the public FTP.
Update development snapshot to most recent on the ftp server.
Update Firefox for linux port to 2.0.0.1 to fix several security issues including a cross site scripting bug, rss feed reader leaks, and some other issues.
enscript-a4 added
skippy-xd added
Update to the latest clamav instead.
Update Clam AV to a slightly newer version.
Fix another path issue.
Fix the path for pixmaps so that the images load when this is installed.
Add mlvwm, a macintosh like window manager.
Forgot something...
Add cvsup
Add ezm3 for cvsup
Add xine, a video player for x11
Add xine, a video player for X11.
update libxine to work with recent xine version.
Update Win32 codecs to a version that actually exists on an ftp server.
Add libmpeg2
Update MySQL to 5.1.12 which is not the latest, but slightly more recent.
Squirrelmail was updated to fix a security issue.
Update gnupg to 1.4.6 to fix a security advosory on or before November 30, 2006
Add addresses, a GNUstep Address Book
Add Matrox driver
Add x2x and x2vnc
Support for multihead displays
Added Synaptics touchpad driver for XOrg
Add FreeTar, a GNUstep tar application.
Update GNU tar to 1.16. No globbing by default change incorporated. GNUTYPE_NAMES directory traversal vulnerability fix.
Add pear-DBA
Add pear-DB
Add pear for php
Add squirrelmail
add php5-xml for squirrelmail
Add mhash
add php5-gettext for squirrelmail
Add php5 mysqli extension.
Add openldap sasl client
Update to 2.3.30
Update pkg-descr for the new port details.
Forgot to mention that we can't distribute on CDROM.
Replace existing lha port with a maintained version used in OpenBSD and Gentoo. Obtained soem of the patches from OpenBSD ports. This also fixes several vulnerabilities in the lha package. As its in japanese, I can't read it so lets hope I got it right.
Update Dovecot to fix a security vulnerability. This is also a significant jump in the RC version.
update patch for new version
ngircd added
Add chroot safe
Add tripwire!
Update to 2.9.0.2 as its the latest I can fetch from the mirrors. This version is not the latest, however.
Add phpMyAdmin
add pecl-pdflib for phpMyAdmin
Add php5 multibyte string lib
Add mcrypt php lib
Add mcrypt and libmcrypt for php
Add php5 openssl support.
Add php5-gd
Add cvsweb3 and its dependancies.
Add enscript-letter
Add p5-MIME-Types
Add view vc
Add apache 2.2.3 webserver.
Add YouTube downloader.
Fix a security problem with cgi as seen on bugtraq.
Add Apache httpd 2.0!
Update QT to fix a security vulnerability.
wesnoth added
Add unix2dos
KDE depends...
zipios++ added
sdl_net added
Update PHP to 5.2.0
Add artswrapper for KDE
Add jasper JPEG library
Add libthai for KDE
Add gamin, a file monitoring program used by kde and gnome.
A little script to let KDE find gnome apps for its menus.
Add libusb for KDE
Add kdehier
Added the NVIDIA settings utility to allow adjustments to OpenGL quality, etc. Cleaned up x11 makefile
Update NVIDIA port to fix a potential security issue.
Add tuxracer
Add tcl 8.3
Update MySQL to 5.0.27
Add LucasFilm's ILM image format for KDE! Why is this a dependancy for KDE?
Add Apple's mDNSResponder
Add arts for kde apps
Add jack for kde
add portaudio for kde
Add libsndfile for kde
Add samba libsmbclient for possible inclusion of kde in the future.
Set default python version to 2.4
remove symbolic link to /usr/local/bin/python since we have 2.4 which will be default now.
Add python 2.4
Python 2.3 joins are list of Python ports!
add qt 3.3
Add nas for qt33
Add qmake
Update thunderbird for a recent vulnerability.
Update subversion to the latest release (nov 9)
update Cherokee website details
Add Python 2.2
Update to 4.5p1
Add vlock
Add log viewer
add vnccrack
Add webfwlog
Add xmlsec
Add xmlsec1.
X11 keylogger
Add yafic
Add libnet
add zebedee
Add xinetd
add zombie zapper
Add zombie zapper
Add libnet 1.0
add wipe to tidy up files :)
Minor cleanup
add mysql 5.1 p5 module
add p5 module for mysql 4.1
Add p5-HTML ports
add perl ports
Add p5-MIME-Base64
Add p5-PathTools
add p5-URI
Add p5-Test*
Add php5 compression ports
Add mysql 5.1
Add php5 tidy
Add Tidy devel and Tidy lib for php5-tidy
Update firefox devel port
Add php5-session
Add php5-pcre
Add MySQL 4.1
Add unix odbc
Still more bdb
bdb 4.2 with no crypto
Still more bdb
Add netbsd port db which manipulates bdb
add more bdb than you can shake a stick at....
Add BDB 42 as some programs like apr-subversion/subversion use it as a default.
brs added
set default python version to 2.1 in bsd.python.mk
Bump port revision after patching.
apr apr-svn and subversion added
pkg-plist update with port-midnightbsd0 and bin/python symlink
python21 now creates a bin/python symlink
Enable the port and bump the revision since it *should* work ok now.
Major fixes to port. Should solve all our problems!
devtodo added
news/slrn added
ogle added
liba52-devel added
djbfft added
Minor cleanup on Makefile
add cdiff
Add portlint script to verify mports.
Patch security vulnerability as reported by the ubuntu project in encoding.c referring to UTF8 strings
Add obliterate to zero deleted files
add german tv browser
Add adobe acrobat, alternate dictionaries and spell check files, german telecom phone guide, and an html reference.
Add agrep for german ports
Add german staroffice ports
add manpages for Germans :)
Adds a shell script to save the state of the mixer between reboots
Add yawho, a utility similar to "w". It lists how users are connected and the running program they are using.
Add portsearch to simplify searching ports.
Fix plist s/plat-freebsd6/plat-midnightbsd0
Make python as broken so end users don't try to use it.
Add python21
Python is not 100% yet as modules are not working, make test fails (on loading modules), the path for modules is not set. It does compile and run and is commited to facilitate work with other developers. autoconf was required as we had to hack configure.in to get cc/ld flags set properly.
ddclient added
p5-Net-SSLeay added
p5-IO-Socket-SSL added
privoxy added
wget added
Missed depend of glib20
Added more perl
Add some more perl modules.
Update default for documents.
update pgsql version info in bsd.database.mk
portupgrade fixed
removed portupgrade - needs more work
portupgrade and ruby-bdb added
Changes to legacy doit.sh in case we need it. Python is not building to use the newer script.
Update development version.
battalion added
Add openssh-portable port
Add OpenSSH Portable so that users can install a customized version of OpenSSH. There have also been some issues with the base OpenSSH and this maybe a temporary fix for some.
add xloadimage which allows you to load images in x11 in the root window, etc.
Add memtest port
Add memtest86 port
libchk allows you to find unreferenced shared libraries which can be helpful during mport development.
aide and mhash added
php5-mysql added
php5-pgsql added
php5 added
Add WITH_DEBUG option for ports. Now it is possible to add generic or specific flags to all ports to aid in debugging.
Fixed instances where ECHO_CMD was used instead of ECHO_MSG
Update firefox 3 snap to something from october :)
Update firefox to 2.0 release.
mplayer added
xvid added
spamd added
neon added
pwgen added
bitlbee added
postgresql-plruby added
PostgreSQL databases added
fix incorrect addition in makefile
i know i commited this..
seveal files were never commited with these ports. This needs to be corrected. This commit should allow indexes to be built again.
disable jlint until fixed.
remove gcj compat until its fixed.
Remove jaf until the port is fixed.
oops.. an index might be helpful
Corrected missing version number on gnats
Forgot to add a category makefile
cherokee added
xli added
openbox wm added
rtorrent added
goonies game added
sdl_mixer added
smpeg added
sdl_image added
wmlpq added
change directory to /usr/mports
add MidnightBSD
add gnats
s/Free/Midnight
add jakarta-bcel
add jad
add gnu regex lib
add cos
add classpath
add bouncy castle
add berkeley db java implementation
apache avalon log kit
add xdoclet
gcj java compatibility libraries
add lame mp3 encoder
add jakarta commons logging
add makefile
add libxine
add dvd reading libraries...
add libfame for libxine
add vcdimager for xine
add libcdio for xine
add libmodplug
add speex and flac
add apache tomcat
add libcddb for xine (indirectly)
add libtheora
add curl for a multimedia player
add c-ares
add ftp category
add win32 codecs
add manedit
add staroffice 7.0 port. We need something until openoffice or abiword actually works.
add gcc 3.3 for openoffice
add ORBit
Openoffice needs this.
add gnu coreutils
add jedit text editor
add bluej
add primitives
add jdbc pool
plugins are nice.
add java imaging api
add linux-realplayer
add linux realplayer
add linux plugin wrapper
jre time :)
add jdom and jaxen
add netbeans3
add netbeans 4
add libGL
add jikes java compiler
add junit
add jakarta oro awk/perl regex/etc library
add a boatload of x11 libraries in an attempt to fix linux-enemyterritory
add jakarta regular expressions port
add apache-ant
add netbeans port
add freebsd java port
add linux sun jdk 1.4
add linux sun jdk 15.. we need java!
add enemy territory mod ports
Have to add my favorite game! :)
add games category
Importing qemu into mports
add wine!
add fontforge
add bochs
a dependancy of wine requires this
add sdl12
add svgalib
add p5-Storable for p5-DBI
add p5 database libraries for mysql
add mysql50-scripts
add aalib
add mysql 5.0 ports
add nasm for SDL port
add vte for anjuta
add pcre-utf8 for future anjuta import.
add projectcenter.app for GNUstep
add gorm for GNUstep development.
xmms-skins added
add splint and zthread
add mdnsd for rendevous
add bind9
add zziplib
$MidnightBSD$
wmcalclock added
xmms added
libvorbis added
libogg added
libmikmod added
add ruby!
add thttpd webserver.
add wpa supplicant
add libdnet
add clamav virus scanner. We did add samba.. those dirty windows clients might store files. Someday perhaps sendmail will actually compile as well.
add lha
add arj
add cyrus sasl2 ldap
add cyrus-sasl2 and saslauthd
add cyrus-sasl
Add samba port
add openldap 2.3.x
add bdb 43
New version of opera 9.02
Adding docker to mports
add makefile
add 44bsd-rdist
s/Free/Midnight, fixed make fetchindex host
change path to mports
fix ports directory
few minor changes for MidnightBSD
Long story. Need this in ports even though its not building. This must be fixed in a timely fashion and docproj as well.
add linux-allegro, linux-libglade and linuxthreads
mark as broken.. ghostscript-gnu is not available.
add netcat
add linux-sdl12 for graphics/linux-sdl_image
add rsync
add net category
Temporarily remove openmotif options until the port is fixed.
Remove OpenMotif option until we can get that building properly.
Importing madplay into mports
Adding libmad into mports
msmtp added
libidn added
wmmp3 added
mpg123 added
wmymail added
libdockapp added
wmsmixer added
Adding mozilla projects to LEGAL
wmbinclock added
Adding cdrtools to mports and fixing Makefile errors
Importing fusefs-sshfs and DEPS into mports
add stepulator
add stepulator rpn gnustep calculator.
add gnustep-examples
add netclasses for gnustep socket programming.
add grouch gnustep im client.
add renaissance for grouch im client and gtkmm 2.0 for fun
add timemon gnustep utility
qt depends
add easydiff, a gnustep based graphical diff program.
add gtkmm 24
gtkmm 24 stuff
add wdm
add libsigc++12 for gtkmm 2
add gtkmm 1.2.8
add gtkmm 1.2.8.
add libsigc++ for gtkmm future import
Update it by one minor revision. This fixes a few bugs we care about. The 1.2.6 patch corrects memory leaks, but also requires some new patches. We'll hold off on that for now.
add slim
add slim login manager
add docproj
add netpbm, scr2png and jbigkit for docproj.
Add fixrtf
*** empty log message ***
*** empty log message ***
working toward docproj
Its nice to stay current
Update thunderbird to the latest version.
add imlib for amaya
Add analog for reporting on website logs.
Add Dave Ragget's HTML Tidy program.
Importing nvidia-xconfig into mports
Updating snapshot of linux-firefox-devel
Importing ncurses into mports
Importing legal-packages.sh into mports.
Importing LEGAL into mports tree
Correcting ${OSREL} in port
Importing gaim into mports
Importing silc-toolkit to mports
Importing libao into mports
Importing gtkspell into mports
Importing gnomehier to mports
Importing startup-notification to mports
Adding feh and DEPS to mports
Importing fluxbox-devel into mports
Correct error in blackbox Makefile
Importing blackbox into mports
Adding GNUPG into mports
add gnuplot
add pdflib
Updating MAINTAINER in ports
links1 is needed by the docproj port
add dsssl-docbook-modular (stylesheets) for docbook-utils
oops
add p5-SGMLSpm for docbook-utils (future)
oops might help if i commit this
add texi2html
add docbook ide for emacs (lisp)
add docbook-xml 430 and 440
fix maintainer
add docbook-sk
add docbook-xsd
add docbook-xsl
add mutt-devel
add sdocbook-xml
add sdocbook
add libslang for mutt-devel (eventually)
add wpop3d
add wpop3d pop3 daemon
Adding fetchmail and DEPS to mports
Commiting remaining dep for mutt
add gnustep text editor
add acrobat reader
add t1lib
add gd
New version is more secure.
fix the packing list
Add firefox for linux and its development counterpart.
add linux-thunderbird
add w3c libwww.
add mutt client
add mime-support for mutt
added more docbook ports.
add more ports
add jade port for sgmlformat
add jade
add editors
add xemacs packages which is required by xemacs
add xemacs
added docbook meta port and linux documentation sgml
add docbook versions for jade and sgmlformat which is required by mutt
add vim 6
add dovecot imap and pop3 mail server software.
add vim5
Add vim lite
add pine pgp integration
add pine
add mail and editors
This still needs work, but its required for emacs X mode.
some people actually like emacs. I'm not one of them. :)
Add pico for pine support
add vi improved. backups are nice :)
Add ispell for use with pico/pine.
Add linux-mozilla related ports
add this for linux-seamonkey
linux dri might be nice.
Still more linux ports...
add additional linux compatibility libraries.
Add linux-base fedora core 4
emulators added
add linux_base fedora core 4
Forgot german
add a file manager
Added some categories. Who forgot the x11-servers and x11-fonts? :)
Add gtk12 for workspace
Add terminal.app so i don't have to use xterm.
Opera requires compat4x and compat5x for some reason.
add compat4x for freebsd legacy binaries
Add legacy FreeBSD 4.x support.
Add midnightbsd support :)
archite owns this :)
Add opera web browser
fix maintainer
add gsfonts
add glib12 for gnustep-xdps port indirectly
add gnustep port
add dgs
add gnustep-xdps
gnustep gui might be nice
add gnustep-gui
add gnustep-cairo/gnustep-art
add gnustep-cairo
add gnustep-art
add gnutls
Add aspell
add cups
add german category for gnustep-base
add libaudiofile and audio category
add libaudiofile for gnustep-back related
add gnustep-back
wmii added
openvpn added
lzo2 added
add gnustep-objc
Add gnustep-base finally!
add libgpg-error for libgcrypt for libxslt for gnustep-base!
add libgcrypt
add libxslt
add math category
add libgmp4 & math category.
add yet another autoconf
add autoconf 2.59
add another autoconf...
add more automake
add automake 1.9
automake 1.5 add
add gnu-autoconf
add autoconf
Add for gnu-automake
add help2man
newer automake
Add shells
Our third step toward gnustep :)
add ffcall for gnustep's addition in the future.
Add ffcall for gnustep
add libungif for windowmaker
Add wmicons port for windowmaker
add windowmaker
add windowmaker port
add gtk20 port
add gtk20 port for gcjawt support
add libart lgpl port
add libart lgpl port for gcc gcjawt usage
Add gcc ports
add gcc
Add gcc 3.2
add gcc 42 java
Add gcc 4.2
GCC with java
Add gcc objective-c port
adding graphics/gle, graphics/libglut, misc/shared-mime-info, textproc/libxml2 to mports
importing nss into mports
Adding depends for archivers/rpm to mports
hicolor-icon-theme added
pango added
cairo and glitz added
libIDL added to mports
bison added to mports
m4 added to mports
*** empty log message ***
added accessibility/atk to mports
desktop-file-utils added to mports
popt added to mports
add gcc 4.0
nspr added to mports
p5-XML-Parser added to mports
p5-XML-Parser added to mports
Add the rest of the ports
Add wapsh which allows you to login to remote systems using cell phones.
Add v7sh
add tcshrc addon
*** empty log message ***
add scponly shell
add sash
add rssh
add
perlsh add
add pdksh
add pash.
Add osh, a unix 6th edition shell implementation.
add no login msg
Add mudsh.. crazy.
add MirBSD ksh
add zsh
add at&t ksh
Added pmk to devel
Add ibsh.
Add fd.
add esh
Add es.
add bash2
add bash completion..
add bash.
add bzip/bzip2
add bzip2
Add bzip
Add unarj
Add zoo and unzoo.
Add zoo.
add unzoo
Add rpm2cpio and unace.
Add unace
Add rpm2cpio
Add rpm, rar, p7zip.
Add redhat package manager (rpm)
Add rar
Add p7zip
add gzrecover
Add gzip and gtar
add gzip
Add gtar
Add arc extraction problem.
imported links and depends into mports
Added pekwm and dependencies to mports
archivers
Added archivers
unrar port added.
$MidnightBSD$ and maintainer updated.
Add zip port.
Add unzip port.
Update maintainer and $MidnightBSD$
Update maintainers and $MidnightBSD$
Fix maintainer email addresses.
forcing freebsd6.0 in configure scripts to help with compatability
importing compat5x and depends into mports
update to patch-FreeBSD.cf
Adding sudo to mports
Correcting sysutils Makefile
Added screen to mports
Added fluxbox to mports with all depends
Add nvidia-driver into mports
Initial upload of MidnighBSD's mports
Standard project directories initialized by cvs2svn.