Revision
2914 -
Directory Listing
-
[select for diffs]
Modified
Wed May 20 23:33:31 2009 UTC
(15 years, 4 months ago)
by
laffer1
Diff to
previous 2913
,
to
selected 92
Prompt user for keymap/country selection. This will adjust the map for different locales, etc. Also remove configuration options for exim and postfix as we don't have mports for them.
Revision
2911 -
Directory Listing
-
[select for diffs]
Modified
Wed May 20 22:24:27 2009 UTC
(15 years, 4 months ago)
by
laffer1
Diff to
previous 2910
,
to
selected 92
We no longer have usbd, devd does all the heavy lifting.
ALso, remove process limits from sysinstall. It makes absolutely no sense to have process limits for the installer.
Revision
2903 -
Directory Listing
-
[select for diffs]
Modified
Wed May 20 16:34:47 2009 UTC
(15 years, 4 months ago)
by
laffer1
Diff to
previous 2902
,
to
selected 92
Overhaul re(4).
o Increased number of Rx/Tx descriptors to 256 for 8169 GigEs
because it's hard to push the hardware to the limit with default
64 descriptors.
TSO requires large number of Tx descriptors to pass a full sized
TCP segment(65535 bytes IP packet) to hardware. Previously it
consumed 32 Tx descriptors, assuming MCLBYTES DMA segment size,
to send the TCP segment which means re(4) couldn't queue more
than two full sized IP packets.
For 8139C+ it still uses 64 Rx/Tx descriptors due to its hardware
limitations. With this changes there are (very) small waste of
memory for 8139C+ users but I don't think it would affect 8139C+
users for most cases.
o Various bus_dma(9) fixes.
- The hardware supports DAC so allow 64bit DMA operations.
- Removed BUS_DMA_ALLOC_NOW flag.
- Increased DMA segment size to 4096 from MCLBYTES because TSO
consumes too many descriptors with MCLBYTES DMA segment size.
- Tx/Rx side bus_dmamap_load_mbuf_sg(9) support. With these
changes the code is more readable than previous one and got a
(slightly) better performance as it doesn't need to pass/
decode arguments to/from callback function.
- Removed unnecessary callback function re_dmamap_desc() and
nuked rl_dmaload_arg structure which was used in the callback.
- Additional protection for DMA map load failure. In case of
failure reuse current map instead of returning a bogus DMA
map.
- Deferred DMA map unloading/sync operation for maximum
performance until we really need to load new DMA map. If we
happen to reuse current map(e.g. input error) there is no need
to sync/unload/load again.
- The number of allowable Tx DMA segments for a mbuf chains are
now 32 instead of magic nseg value. If the number of available
Tx descriptors are short enough to send highly fragmented mbuf
chains an optimized re_defrag() is called to collapse mbuf
chains which is supposed to be much faster than m_defrag(9).
re_defrag() was borrowed from ath(4).
- Separated Rx/Tx DMA tag from a common DMA tag such that Rx DMA
tag correctly uses DMA maps that were created with DMA alignment
restriction(8bytes alignments). Tx DMA tag does not have such
alignment limitation.
- Added additional sanity checks for DMA ring map load failure.
- Added additional spare Rx DMA map for graceful handling of Rx
DMA map load failure.
- Fixed misused bus_dmamap_sync(9) and added missing
bus_dmamap_sync(9) in re_encap()/re_txeof()/re_rxeof().
o Enabled TSO again as re(4) have reasonable number of Tx
descriptors.
o Don't touch DMA address of a Tx descriptor in re_txeof(). It's
not needed.
o Fix incorrect update of if_ierrors counter. For Rx buffer
shortage it should update if_qdrops as the buffer is reused.
o Added checks for unsupported H/W revisions and return ENXIO for
these hardwares. This is required to remove resource allocation
code in re_probe as other drivers do in device probe routine.
o Modified descriptor index manipulation macros as it's now possible
to have different number of descriptors for Rx/Tx.
o In re_start, to save a lock operation, use IFQ_DRV_IS_EMPTY before
trying to invoke IFQ_DRV_DEQUEUE. Also don't blindly call re_encap
since we already know the number of available Tx descriptors in
advance.
o Removed RL_TX_DESC_THLD which was used to reserve RL_TX_DESC_THLD
descriptors in Tx path. There is no such a limitation mentioned in
8139C+/8169/8110/8168/8101/8111 datasheet and it seems to work ok
without reserving RL_TX_DESC_THLD descriptors.
o Fix a comment for RL_GTXSTART. The register is 8bits register.
o Added comments for 8169/8139C+ hardware restrictions on descriptors.
o Removed forward declaration for "struct rl_softc", it's not needed.
o Added a new structure rl_txdesc for Tx descriptor managements and
a structure rl_rxdesc for Rx descriptor managements.
o Removed unused member variable rl_intlock in driver softc. There are
still several unused member variables which are supposed to be used
to access hardware statistics counters. But it seems that accessing
hardware counters were not implemented yet.
Obtained from: FreeBSD , RELENG_7 if_re.c 1.101, if_re.c 1.102, if_rlreg.h 1.70
Revision
2901 -
Directory Listing
-
[select for diffs]
Modified
Wed May 20 16:25:39 2009 UTC
(15 years, 4 months ago)
by
laffer1
Diff to
previous 2900
,
to
selected 92
By definition promiscuous mode should see all unicast frames as well
as multicast/broadcast frames. Previously re(4) ignored multicast
frames in promiscuous mode. The RTL8169 datasheet was not clear
how it handles multicast frames in promiscuous mode.
Obtained from: FreeBSD
Revision
2900 -
Directory Listing
-
[select for diffs]
Modified
Wed May 20 16:11:43 2009 UTC
(15 years, 4 months ago)
by
laffer1
Diff to
previous 2899
,
to
selected 92
Enabling powerd by default was a good idea, but quite error prone. On my new system and several others, it causes panics. It also seems to interfere with stable operation on older hyperthreaded Pentium 4 based systems (such as the Dell GX270)
Let's disable it here and plan on adding an option in the installer to turn it on or off.
Revision
2886 -
Directory Listing
-
[select for diffs]
Modified
Sat May 16 18:38:51 2009 UTC
(15 years, 4 months ago)
by
laffer1
Diff to
previous 2885
,
to
selected 92
add CPUID bits to ident phenom processor
There are several new CPUIDs to recognize AMD Extended Features, ECX 07FFh for Phenom processor.
According to [1], they are:
Bit 0: LAHF/SAHF
Bit 1: CMP
Bit 2: SVM (Secure Virtual Mode)
Bit 3: APIC
Bit 4: MOV CR8
*Bit 5: Advanced Bit Manipulation (LZCNT)
*Bit 6: SSE4A (EXTRQ, INSERTQ, MOVNTSS, MOVNTSD)
*Bit 7: Misalign SSE
Bit 8: 3DNow! (PREFETCH и PREFTECHW)
*Bit 9: OS Visible Workaround
*Bit 10: Instruction Based Sampling
* - missing bits in amd64/identcpu.c
[1]http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/31116.pdf
Based on patch by pluknet for FreeBSD
Revision
2848 -
Directory Listing
-
[select for diffs]
Modified
Thu Apr 23 04:23:54 2009 UTC
(15 years, 5 months ago)
by
ctriv
Diff to
previous 2847
,
to
selected 92
Look for libraries in $DESTDIR/lib first. This unbreaks building perl for a
0.3 world on a 0.2 box. This isn't 100% correct yet, work needs to be done
on limiting where the perl configure looks for libs.
Revision
2841 -
Directory Listing
-
[select for diffs]
Modified
Wed Apr 22 18:06:36 2009 UTC
(15 years, 5 months ago)
by
laffer1
Diff to
previous 2840
,
to
selected 92
The function ASN1_STRING_print_ex does not properly validate the lengths
of BMPString or UniversalString objects before attempting to print them.
Remotely exploitable bug in openssl
Revision
2833 -
Directory Listing
-
[select for diffs]
Modified
Thu Apr 16 02:03:03 2009 UTC
(15 years, 5 months ago)
by
laffer1
Diff to
previous 2832
,
to
selected 92
One of the problems seen on smultron's box was that bootstrap tools were not build. Correct an error in that section to force tools to build again.
Revision
2830 -
Directory Listing
-
[select for diffs]
Modified
Thu Apr 16 01:27:14 2009 UTC
(15 years, 5 months ago)
by
laffer1
Diff to
previous 2829
,
to
selected 92
Add the '-u name' option to the env command, which will completely
unset the given variable name (removing it from the environment, instead
of just setting it to a null value).
Obtained from: FreeBSD
Revision
2824 -
Directory Listing
-
[select for diffs]
Modified
Wed Apr 15 19:22:31 2009 UTC
(15 years, 5 months ago)
by
laffer1
Diff to
previous 2823
,
to
selected 92
Correct the following defect in PF, originally reported to OpenBSD and later in our #midnightbsd chatroom:
Author : Rembrandt
Date : 2009-04-09
Affected Software: OpenBSD Kernel
Affected OS : OpenBSD 4.{3,4,5}, OpenBSD-current
Propably older versions are affected as well
Type : Denial of Service
OSVDB :
Milw0rm : 8406
CVE :
ISS X-Force: :
BID : 34482
Secunia : 34676
VUPEN ID :
Trying to fix it responsible and get in contact with the vendor:
-- OpenBSD --
Contacted 2009-04-09 15:35 GMT+1
Patch avaiable 2009-04-11 23:43 UTC
We received no response nor a notification about an upcoming patch by
the developers.
-- END --
OpenBSDs PF firewall in OpenBSD 4.3 up to OpenBSD-current is prone to a
remote Denial of Service during a null pointer dereference in relation with
special crafted IP datagrams. If the firewall handles such a packet the kernel
panics.
Steps to reproduce:
If you are behind a OpenBSD firewall this nmap scan should trigger the problem
and crash your firewall device:
nmap -sO $some_host_so_that_the_firewall_handles_the_packets
For more informations please do read the patch issued by OpenBSD.
Patches and Workaround:
Patches are provided for OpenBSD 4.3, 4.4, 4.5 (upcoming, release 1st of may)
and OpenBSD-current (via CVS only) and are avaiable at the errata website.
The developers provide hints for a workaround at their errata website too.
Kind regards,
Rembrandt
Revision
2823 -
Directory Listing
-
[select for diffs]
Modified
Wed Apr 15 16:48:51 2009 UTC
(15 years, 5 months ago)
by
laffer1
Diff to
previous 2822
,
to
selected 92
ports is renamed mports and i've made several changes to the manual for midnightbsd. more are needed at a later date. We were installing as ports and mports anyway.
Revision
2767 -
Directory Listing
-
[select for diffs]
Modified
Sat Apr 11 19:33:46 2009 UTC
(15 years, 5 months ago)
by
laffer1
Diff to
previous 2766
,
to
selected 92
This script creates html pages from installed man pages in /usr/share/man (or whatever path you specify). It will do section 1-9 of the manual.
TODO:
Generate indexes for each section of the manual and a main index page.
Post processing on the output with other tools so it's not so ugly.
Revision
2756 -
Directory Listing
-
[select for diffs]
Modified
Sat Apr 11 04:43:26 2009 UTC
(15 years, 5 months ago)
by
laffer1
Diff to
previous 2755
,
to
selected 92
Don't bother the user with a cryptic "file not found" message. The sysctl is failing only in cases we don't have a battery in the system or it is not reporting battery life.
Revision
2736 -
Directory Listing
-
[select for diffs]
Modified
Sat Apr 4 15:15:07 2009 UTC
(15 years, 5 months ago)
by
laffer1
Diff to
previous 2735
,
to
selected 92
Enable support for the Microsoft Hyper-V virtual machine system in Windows 2008 server, etc.
You may still need to set the media type for dhcp clients, but at least the system can now shutdown properly.
Revision
2730 -
Directory Listing
-
[select for diffs]
Modified
Fri Apr 3 05:16:13 2009 UTC
(15 years, 5 months ago)
by
laffer1
Diff to
previous 2729
,
to
selected 92
remove csup from the base system. We've had some open bug reports on this and it looks like we might migrate off cvs anyway. It does not support cvs 1.12.x properly.
Revision
2704 -
Directory Listing
-
[select for diffs]
Modified
Sun Mar 29 03:16:35 2009 UTC
(15 years, 5 months ago)
by
laffer1
Diff to
previous 2703
,
to
selected 92
last commit of the evening :)
Fix a few problems with this man page in relation to the new mksh(1) as /bin/sh change. The list needs to be revised for mksh features and missing ashisms.
Revision
2698 -
Directory Listing
-
[select for diffs]
Modified
Sun Mar 29 03:00:26 2009 UTC
(15 years, 5 months ago)
by
laffer1
Diff to
previous 2696
,
to
selected 92
Temporarily disable ahd, adaptec 79xx driver from lint testing until we get it working again. Currently it's a compile error and we need to test other parts of the system
Revision
2632 -
Directory Listing
-
[select for diffs]
Modified
Fri Mar 20 22:26:12 2009 UTC
(15 years, 6 months ago)
by
ctriv
Diff to
previous 2631
,
to
selected 92
Nagging is a great thing for freebsd to be doing. We're not going to
make much of a difference nagging though, and it's slowing down builds.
Remove the sleep.
Revision
2624 -
Directory Listing
-
[select for diffs]
Modified
Mon Mar 16 17:31:22 2009 UTC
(15 years, 6 months ago)
by
ctriv
Diff to
previous 2623
,
to
selected 92
Now compress man pages properly.
Todo:
* decide on the compiletime options we want. Two big ones are 64 bit
support and threads
* fix building in '.'. Right now you have to make obj first.
* test building when perl isn't already installed. I think it'll
work...
Revision
2622 -
Directory Listing
-
[select for diffs]
Modified
Mon Mar 16 16:23:37 2009 UTC
(15 years, 6 months ago)
by
laffer1
Diff to
previous 2621
,
to
selected 92
Fix information leakage. Some jackass didn't use -DPURIFY which lets the code run memset. So uninitialized memory is written to db files all over the system.
Revision
2597 -
Directory Listing
-
[select for diffs]
Modified
Sun Mar 1 19:21:37 2009 UTC
(15 years, 6 months ago)
by
laffer1
Diff to
previous 2596
,
to
selected 92
o Add stub support for some new futex operations,
so the annoying message is not printed.
o Don't warn about FUTEX_FD not being implemented
and return ENOSYS instead of 0 (eg. success).
o Clear FUTEX_PRIVATE_FLAG as we actually implement
only private futexes so there is no reason to
return ENOSYS when app asks for a private futex.
We don't reject shared futexes because they worked
just fine with our implementation so far.
Obtained from freebsd, rdivacky
Revision
2586 -
Directory Listing
-
[select for diffs]
Modified
Tue Jan 20 20:10:04 2009 UTC
(15 years, 8 months ago)
by
laffer1
Diff to
previous 2585
,
to
selected 92
sc->ndis_txidx should be cycle between 0 and sc->ndis_maxpkts, not
NDIS_TXPKTS and don't allocate unused extra spaces for sc->ndis_txarray
and sc->ndis_txpool.
Revision
2585 -
Directory Listing
-
[select for diffs]
Modified
Tue Jan 20 19:53:10 2009 UTC
(15 years, 8 months ago)
by
laffer1
Diff to
previous 2584
,
to
selected 92
This fix was found in freebsd pr 124225
Description:
Normally, when packets are queued to the ndis network interface, ndis_start()
is called to move packets from the interface send queue to the underlying
NDIS driver.
If the network link is down or the underlying driver is busy transmitting data,
ndis_start() just returns.
When the link goes up, ndis_starttask() is supposed to be called after
ndis_ticktask() in order to transmit already queued packets.
After a watchdog timeout, ndis_starttask() is likewise supposed to be called
after ndis_resettask().
Unfortunately, work items used for triggering calls to ndis_ticktask(),
ndis_starttask() and ndis_resettask() are placed on separarate task lists which
are handled by separate kernel processes, thus losing ordering information
about when the tasks should be performed in relation to each other.
If the interface send queue is full after a watchdog timeout or link up event
and the tasks were handled in the wrong order then further attempts to send
packets via the interface results in ENOBUFS ("No buffer space available").
How-To-Repeat:
Use the ndis driver for a wireless network card in an area with many APs on
nearby channels and on a machine with many active tcp connections, causing link
to temporarily go down every few hours, and the interface send queue to be
filled while the link is temporarily down.
Fix:
A proper fix is to ensure that related tasks are handled in the correct order.
The following kludge justs add extra attempts at scheduling calls to
ndis_starttask() as part of the processing of ndis_ticktask() and
ndis_resettask(). It depends on defensive coding in IoQueueWorkItem(),
i.e. that nothing is done if the work item is already queued.
Revision
2583 -
Directory Listing
-
[select for diffs]
Modified
Tue Jan 20 19:40:53 2009 UTC
(15 years, 8 months ago)
by
laffer1
Diff to
previous 2582
,
to
selected 92
Fix a problem with broadcom and marvell wifi using ndis. Scan results are not stored properly as some do not give a desired buffer length. Make a default. This fixes problems with some macbooks too
Revision
2564 -
Directory Listing
-
[select for diffs]
Modified
Mon Jan 19 22:02:25 2009 UTC
(15 years, 8 months ago)
by
laffer1
Diff to
previous 2563
,
to
selected 92
Add bwi to MidnightBSD. bwi is a very limited broadcom wireless nic adapter from DragonFly, NetBSD, and OpenBSD. This is not connected to the build and requires a firmware which is hard to come by.
Revision
2530 -
Directory Listing
-
[select for diffs]
Modified
Sat Jan 17 16:25:06 2009 UTC
(15 years, 8 months ago)
by
laffer1
Diff to
previous 2529
,
to
selected 92
Emit a warning when the network_interfaces variable is not set to AUTO and change wpa_supplicant to down the interface at the start of the init routine. wpa_supplicant expects that it has exclusive access to the net80211 state. This stops errors trying to scan when it's already scanning causing a problem connecting. This was an issue for firmware based cards in particular. Do not bother ifconfig up(ing) the interface since it is downed again
Revision
2391 -
Directory Listing
-
[select for diffs]
Modified
Sun Dec 7 03:28:31 2008 UTC
(15 years, 9 months ago)
by
laffer1
Diff to
previous 2390
,
to
selected 92
Remove 3c501 isa based 3com nic. This is quite old and not entirely in line with the current development. I don't even have a system with an ISA slot to test one in if i had one. Also remove pcf which is replaced with i2c
Revision
2379 -
Directory Listing
-
[select for diffs]
Modified
Sat Dec 6 05:08:38 2008 UTC
(15 years, 9 months ago)
by
laffer1
Diff to
previous 2378
,
to
selected 92
Replace the batt command with a new implementation written in C. This version uses the sysctlbyname interface to collect data and runs much more quickly. Still requires ACPI battery information.
Add l, t and u flags to show the battery life as a percentage, time remaining, and number of batteries (units). The default is l and t.
Revision
2273 -
Directory Listing
-
[select for diffs]
Modified
Mon Dec 1 23:46:38 2008 UTC
(15 years, 9 months ago)
by
laffer1
Diff to
previous 2272
,
to
selected 92
Make additional modifications to ata-chipset to syncronize with changes elsewhere in ata. Temporarily back out the sata + cd patch we were using (for the most part) to see how stable this is without it.
Revision
2065 -
Directory Listing
-
[select for diffs]
Modified
Sun Nov 16 22:12:28 2008 UTC
(15 years, 10 months ago)
by
laffer1
Diff to
previous 2064
,
to
selected 92
Add sade utility (connect to build). This is a disk editor which duplicates some of the functionality of sysinstall so that we can remove it later.
Does not support gmirror, etc yet. It's better than nothing.
Revision
2012 -
Directory Listing
-
[select for diffs]
Modified
Tue Nov 11 21:29:37 2008 UTC
(15 years, 10 months ago)
by
laffer1
Diff to
previous 2011
,
to
selected 92
Remove mca which was only used for ia64.
Add recoverdisk, a handy utility for hard drives and optical media.
Sync idmapd with freebsd 7.
Switch to the new world order.
Revision
1934 -
Directory Listing
-
[select for diffs]
Modified
Fri Oct 17 17:20:42 2008 UTC
(15 years, 11 months ago)
by
laffer1
Diff to
previous 1933
,
to
selected 92
We're having a lot of compliants about pkg_add failing which seem to be firewall related. Drop the firewall during the firstboot script and bring it back up after fetching.
Revision
1924 -
Directory Listing
-
[select for diffs]
Modified
Sun Oct 5 18:18:58 2008 UTC
(15 years, 11 months ago)
by
laffer1
Diff to
previous 1923
,
to
selected 92
update procedure:
cd /usr/src; cvs update -d
cd share/mk; make install
cd ../../lib/ncurses
make (you'll get errors)
make install
make
make install
Revision
1910 -
Directory Listing
-
[select for diffs]
Modified
Thu Oct 2 02:01:58 2008 UTC
(15 years, 11 months ago)
by
laffer1
Diff to
previous 1909
,
to
selected 92
Move libpthread to libkse. Prepare to set libthr as the default threading library.
Move libncurses to ncurses. Prepare to import a newer version of ncurses.
Revision
1866 -
Directory Listing
-
[select for diffs]
Modified
Mon Sep 29 20:36:53 2008 UTC
(15 years, 11 months ago)
by
laffer1
Diff to
previous 1865
,
to
selected 92
Sync make with freebsd
$MidnightBSD$
<limits.h> is necessary for using INT_MIN, so included it here
explicitly rather than relying on name space pollution to pull it in
for us.
No need to tell make to DTRT with "make love", just do it.
Also remove the 2002/08/31 bootstrapping aid for upgrades from
year old (mid-2001) systems.
Fix splitting into words of the .for expression to allow for
spaces in values. Without this change, the following valid
call broke due to parsing of .MAKEFLAGS in bsd.symver.mk:
cd /usr/src/lib/libc && make -n DEBUG_FLAGS="-DFOO -DBAR"
If the special target .MAKEFILEDEPS exists, then enable the
"remaking makefiles" feature. Otherwise, follow traditional Pmake behavior.
Revision
1865 -
Directory Listing
-
[select for diffs]
Modified
Mon Sep 29 12:32:37 2008 UTC
(15 years, 11 months ago)
by
laffer1
Diff to
previous 1863
,
to
selected 92
Don't split large commands into multiple commands on a 512-byte
boundary but just fail on them. This prevents CSRF-like attacks,
when a web browser is used to access an ftp server.
Reported to OpenBSD by Maksymilian Arciemowicz <cxib@securityreason.com>
Also includes a command "500 Command too long" as part of a revised patch by Luk
e Mewburn.
http://web.nvd.nist.gov/view/vuln/detail;jsessionid=df97c3e18c5c787b6c316f886ad5
?execution=e1s1
CVE-2008-4247
Revision
1806 -
Directory Listing
-
[select for diffs]
Modified
Thu Sep 4 02:55:23 2008 UTC
(16 years ago)
by
laffer1
Diff to
previous 1804
,
to
selected 92
Improve reliability of nforce4 adapters:
- When setting up a packet for transmit, if we the tx ring is over half
full, kick the binary blob to force it to complete any pending tx
completions.
- In the watchdog routine, poke the binary blob to force it to flush any
pending tx completions and only reset the chip if the blob doesn't
complete any of them.
Altqify nve(4).
Obtained from FreeBSD.
Revision
1795 -
Directory Listing
-
[select for diffs]
Modified
Tue Sep 2 05:29:39 2008 UTC
(16 years ago)
by
laffer1
Diff to
previous 1794
,
to
selected 92
Add progress(1) from NetBSD.
progress(1) is a standalone progress bar similar to the one in lukemftp. It is suitable for measu
ring input to arbitrary pipes.
You can use this to create progress bars in scripts, etc.
Revision
1752 -
Directory Listing
-
[select for diffs]
Modified
Sun Aug 17 03:56:12 2008 UTC
(16 years, 1 month ago)
by
laffer1
Diff to
previous 1751
,
to
selected 92
Add batt, a rudimentary command to check the battery life on systems including batteries (typically laptops) that report via ACPI.
This command only reports information visible by sysctl.
Revision
1749 -
Directory Listing
-
[select for diffs]
Modified
Sun Aug 17 03:04:22 2008 UTC
(16 years, 1 month ago)
by
laffer1
Diff to
previous 1748
,
to
selected 92
Bring in changes from DragonFly to MidnightBSD version of cpdup.
Update to 1.11 (previous version 1.09).
This includes some improvements to the multithreaded code as well as fixes for the protocol. As older versions are not compatible, it's important to run the same versions. This should work with DragonFly 2.0's cpdup.
Revision
1739 -
Directory Listing
-
[select for diffs]
Modified
Fri Jul 11 23:40:39 2008 UTC
(16 years, 2 months ago)
by
laffer1
Diff to
previous 1738
,
to
selected 92
Add a default resolv.conf. This will set some DNS servers for systems not using dhcp, etc. We need to make /etc writable on the live cd in reality. This is a stop-gap.
This uses OpenDNS servers. My previous live cds used my own DNS servers, but I've since turned off recursion for security reasons.
Revision
1719 -
Directory Listing
-
[select for diffs]
Modified
Tue Jul 1 07:45:59 2008 UTC
(16 years, 2 months ago)
by
laffer1
Diff to
previous 1718
,
to
selected 92
Add additional intel, nvidia, and amd parts. The intel device using 0x28508086 is an ICH8 mobile ultra ata controller, but I'm not sure what identifier to use with it. It is a santa rosa 2850 controller. Some of these ids are from FreeBSD 6.3 (Soren and other contributors).
Revision
1704 -
Directory Listing
-
[select for diffs]
Modified
Mon Jun 30 04:47:30 2008 UTC
(16 years, 2 months ago)
by
laffer1
Diff to
previous 1703
,
to
selected 92
Use correct date syntax for copyrights. I'm not certain on the legality of using the project name there. I've heard mixed things. We'll stick with this
until we can find out.
Revision
1689 -
Directory Listing
-
[select for diffs]
Modified
Mon Jun 30 02:20:01 2008 UTC
(16 years, 2 months ago)
by
laffer1
Diff to
previous 1688
,
to
selected 92
Syncronize some changes with FreeBSD.
Make -a map to -RpP
prevent statistics from overflowing, avoid division by zero, etc.
hold copied counter in off_t
Update man page with some of these changes.
Report any bugs to me with this change.
Revision
1686 -
Directory Listing
-
[select for diffs]
Modified
Mon Jun 30 01:16:47 2008 UTC
(16 years, 2 months ago)
by
laffer1
Diff to
previous 1685
,
to
selected 92
Make chflags(1) more chmod(1) like.
Add -v to print file names as they are processed and -vv to print flag names as well.
Add -f to ignore failures.
Obtained from FreeBSD CURRENT. Submitted to them by Ighighi at gmail.com
Revision
1685 -
Directory Listing
-
[select for diffs]
Modified
Mon Jun 30 00:49:38 2008 UTC
(16 years, 2 months ago)
by
laffer1
Diff to
previous 1684
,
to
selected 92
Fix bugs with arithmatic expansion $((...)) was truncated to type int.
Change the type for arithmatic expansion to intmax_t on all architectures. SUSv3 requires type long, but allows for larger values.
This improves compability with other shells such as bash, zsh and NetBSD's sh.
Expand $LINENO to the current line number. (SUSv3)
This fixes stupid autotools scripts. (i'm looking at you graphviz)
Merged from FreeBSD CURRENT.
Revision
1684 -
Directory Listing
-
[select for diffs]
Modified
Mon Jun 30 00:40:10 2008 UTC
(16 years, 2 months ago)
by
laffer1
Diff to
previous 1683
,
to
selected 92
Merge changes from FreeBSD and NetBSD.
Support for command -v and -V
Fixes for erre option
A fix for a crash caused by SIGINT
POSIX compliant set +o output
A fix for unalias' exit code.
Man page updates.
Code cleanup, WANRS 3
Revision
1683 -
Directory Listing
-
[select for diffs]
Modified
Sat Jun 28 18:24:33 2008 UTC
(16 years, 2 months ago)
by
laffer1
Diff to
previous 1681
,
to
selected 92
Increase timeout from 5 to 10 seconds. This is an arbritrary value and found to be too short on SATA disks for certain operations. (moving bad blocks for instance)
This might also help with write errors in virtual machines.
Revision
1675 -
Directory Listing
-
[select for diffs]
Modified
Fri Jun 27 16:28:38 2008 UTC
(16 years, 2 months ago)
by
laffer1
Diff to
previous 1674
,
to
selected 92
Move AHC and AHD options so they are near the drivers.
Enable firmware(9).
Enable WEP and WPA in kernel.
Fix whitespace problem. For options entries use space and tab not double tab.
Revision
1662 -
Directory Listing
-
[select for diffs]
Modified
Wed Jun 25 20:17:31 2008 UTC
(16 years, 2 months ago)
by
laffer1
Diff to
previous 1661
,
to
selected 92
Add cpufreq(4) and GEOM_LABEL aka GLABEL to GENERIC on i386 and amd64.
cpufreq works with powerd which is already enabled on systems without ACPI support for CPU frequency using several chipsets (intel). This may cause problems for some people which might require an install option for powerd. This needs testing.
glabel allows one to name disks and reference them in dev by that name instead of their normal designation like acd0 or ad0s2d. By adding this to generic, we can easily make a live cd that works on more types of CDROMs. FreeBSD is also moving in this direction for other reasons.
Until the latter can be tested on sparc64, I'll keep it out of generic. We don't support sun style labels right now anyway.
Revision
1661 -
Directory Listing
-
[select for diffs]
Modified
Wed Jun 25 19:49:04 2008 UTC
(16 years, 2 months ago)
by
laffer1
Diff to
previous 1657
,
to
selected 92
Install pcc into /usr/bin /usr/libexec. Do not install man pages as they conflict with gcc equivalants.
Programs installed are pcc, pccom and pccp.
Revision
1637 -
Directory Listing
-
[select for diffs]
Modified
Fri May 23 20:23:49 2008 UTC
(16 years, 4 months ago)
by
laffer1
Diff to
previous 1636
,
to
selected 92
Break up buildiso into two targets. This will allow us to make modifications to the environment manually before creating the tarballs we're extracting on md devices. (package installation?)
Revision
1614 -
Directory Listing
-
[select for diffs]
Modified
Sat May 17 18:03:08 2008 UTC
(16 years, 4 months ago)
by
laffer1
Diff to
previous 1613
,
to
selected 92
In ip_ctloutput(), check for a NULL inpcb pointer before dereferencing,
as this can occur with TCP if protocol-layer socket options are set or
queried after the connection has closed. There are still races
associated with ip_ctloutput() and connection close with TCP, corrected
in HEAD via a more comprehensive set of changes, but this fixes the
trivial panic reported on several occasions.
Obtained from: FreeBSD
Revision
1609 -
Directory Listing
-
[select for diffs]
Modified
Sat May 17 06:47:35 2008 UTC
(16 years, 4 months ago)
by
laffer1
Diff to
previous 1608
,
to
selected 92
$MidnightBSD$
- Prefer clock_gettime(2) over gettimeofday(2) and use CLOCK_MONOTONIC
as it is only used to track elapsed time.[1]
- Fix compiler warnings and style(9) bugs.
consume kld_isloaded(3).
Fix a (very) longstanding bug in moused(8) affecting high-resolution
rodents when linear acceleration (-a) was enabled with a <1 value to
slow them down.
Previously, rounding errors would eat small movements so the mouse
had to be moved a certain distance to get any movement at all. We
now calculate the rounding errors and take them into account when
reporting movement.
Add dynamic acceleration to moused(8). This introduces a '-A' flag to
control the acceleration algorithm. It can be used together with the '-a'
flag for regular acceleration. [1]
Convert macros to use C99's syntax for macros with a variable number of
arguments.
Markup fixes to moused(8).
Obtained from: FreeBSD
Revision
1606 -
Directory Listing
-
[select for diffs]
Modified
Sat May 17 05:36:05 2008 UTC
(16 years, 4 months ago)
by
laffer1
Diff to
previous 1605
,
to
selected 92
Syncronize the cpu detection code on i386 and amd64 with FreeBSD 6.2.
Add better SMP detection including multicore cpus. Detect features on newer processors and initialize them properly. Add support for some newer via c7 cpus.
Also make a subtle adjustment to tcp_syncache.c (unrelated)
Revision
1604 -
Directory Listing
-
[select for diffs]
Modified
Sat May 17 04:45:52 2008 UTC
(16 years, 4 months ago)
by
laffer1
Diff to
previous 1603
,
to
selected 92
$MidnightBSD$
Add some k8 errata hacks to powernow.
smist:
Use bus_dma to get a page in the first 4 GB. Since the physical address
of the magic string is passed in a 32-bit register, we can't use high
memory in the PAE case. This also eliminates a use of vtophys().
Obtained from: FreeBSD.
Revision
1599 -
Directory Listing
-
[select for diffs]
Modified
Fri May 16 23:38:38 2008 UTC
(16 years, 4 months ago)
by
laffer1
Diff to
previous 1598
,
to
selected 92
Pick the smallest possible TCP window scaling factor that will still allow us ot scale up to sb_max aka
kern.ipc.maxsockbuf.
Anything larger will cause window scaling corruption on some firewalls. (other end will think unscaled)
Obtained from: FreeBSD revision 1.131
Revision
1596 -
Directory Listing
-
[select for diffs]
Modified
Fri May 16 21:40:36 2008 UTC
(16 years, 4 months ago)
by
laffer1
Diff to
previous 1595
,
to
selected 92
(needs more testing)
Create a ssh subdirectory and alter the ssh config installation so that it runs in it's own Makefile. This let's us deal with
the new blacklist files in a easy fashion.
Revision
1587 -
Directory Listing
-
[select for diffs]
Modified
Thu May 15 05:55:30 2008 UTC
(16 years, 4 months ago)
by
laffer1
Diff to
previous 1586
,
to
selected 92
Duh. Switch back to /usr/local as cpp will conflict with gcc.
We might need to hack this and/or make a wrapper for the system compiler if we want to connect this to the build.
This is a rare case where we're writing to /usr/local and it's not a port. (maybe the only time) i don't like this one bit.
Revision
1585 -
Directory Listing
-
[select for diffs]
Modified
Thu May 15 05:38:35 2008 UTC
(16 years, 4 months ago)
by
laffer1
Diff to
previous 1584
,
to
selected 92
Add Makefile.inc to define the libexec path we're using.
Disable the man page for pcc for now. I've moved the install path to /usr/bin and /usr/libexec for the files and cc.1 obviously conflicts with gcc's manpage. (actually i need to check on cpp's manpage)
Revision
1584 -
Directory Listing
-
[select for diffs]
Modified
Thu May 15 04:53:33 2008 UTC
(16 years, 4 months ago)
by
laffer1
Diff to
previous 1583
,
to
selected 92
Since I'm having trouble sleeping, I might as well commit my progress on pcc.
This is now compiling on i386 on my laptop. It relies on two changes in bsd.sys.mk and sys.mk that I've not yet committed. (yacc and lex handling)
It's installed to /usr/local with a link to the manpage for pcc(1). (This will conflict with the port)
Revision
1571 -
Directory Listing
-
[select for diffs]
Modified
Mon May 12 03:16:01 2008 UTC
(16 years, 4 months ago)
by
laffer1
Diff to
previous 1570
,
to
selected 92
Do not read away the target directory entry when encountering deleted
files after a seekdir().
The seekdir shall set the position for the next readdir operation.
When the _readdir_unlocked() encounters deleted entry, dd_loc is
already advanced. Continuing the loop leads to premature read of
the target entry.
Submitted by: Marc Balmer <mbalmer at openbsd org>
Obtained from: OpenBSD
Revision
1560 -
Directory Listing
-
[select for diffs]
Modified
Thu May 1 03:18:22 2008 UTC
(16 years, 4 months ago)
by
laffer1
Diff to
previous 1559
,
to
selected 92
Introduce a hack so that __MidnightBSD__ is defined. This should help determine we're running code on MidnightBSD w/ the preprocessor.
You'll no longer need sys/param.h per se.
Revision
1551 -
Directory Listing
-
[select for diffs]
Modified
Tue Apr 29 01:36:03 2008 UTC
(16 years, 4 months ago)
by
laffer1
Diff to
previous 1550
,
to
selected 92
Fix the dreaded libpthread.a is missing crap with bind.
libthr and libpthread are both built now (so sparc64 and i386/amd64 work).
Remove pcvt reference since I deleted that last night.
Remove some directories that we don't need to go through to speed up the build.
Revision
1527 -
Directory Listing
-
[select for diffs]
Modified
Mon Apr 28 04:00:57 2008 UTC
(16 years, 4 months ago)
by
laffer1
Diff to
previous 1526
,
to
selected 92
Cleanups for mailwrapper(8):
- K&R -> ANSI prototype [O]
- Do not bother to do free right before exit() or execve() [O]
- Remove some dead code in addarg()
- Make additional parameters specified in mailer.conf(5)
actually work and document the fact. [N]
- Avoid using __progname but instead use getprogname()
and setprogname() to provide more sensible messages. [O, N]
- Update $OpenBSD$ and $NetBSD$ to reflect the fact that we
have sync'ed with their code.
- WARNS=6
Improvements from FreeBSD, NetBSD and OpenBSD.
Revision
1501 -
Directory Listing
-
[select for diffs]
Modified
Sat Apr 26 17:59:26 2008 UTC
(16 years, 4 months ago)
by
ctriv
Diff to
previous 1499
,
to
selected 92
Next developement snapshot.
Many bug fixes: hardlinks work correctly, exec/unxec parsing, etc...
Packages now have a status, on install it starts as 'dirty', and is set to
'clean' if the install succeeds. Similar logic is used in package deletion,
which now tries harder to keep going after errors.
Revision
1467 -
Directory Listing
-
[select for diffs]
Modified
Fri Apr 11 05:56:43 2008 UTC
(16 years, 5 months ago)
by
laffer1
Diff to
previous 1466
,
to
selected 92
Add support for env in scripts. Some <insert negative here> wrote a python book advocating # python and a lot of scripts are using it. This is insecure, but what do we do...
Revision
1461 -
Directory Listing
-
[select for diffs]
Modified
Thu Apr 10 23:45:52 2008 UTC
(16 years, 5 months ago)
by
laffer1
Diff to
previous 1460
,
to
selected 92
Sync with DragonFly.
Matt added several features to cpdup including parallel transaction support for remote source or targets.
By default, this now compiles with pthreads support.
-l was added to force stdout and stderr to be line-buffered.
Also, we had to modify the casts for pointer types. It is nice to have amd64 build things since pointers aren't ints :)
Revision
1455 -
Directory Listing
-
[select for diffs]
Modified
Sun Apr 6 06:34:28 2008 UTC
(16 years, 5 months ago)
by
laffer1
Diff to
previous 1454
,
to
selected 92
OpenSSH 4.9 introduced an inline sftp-server option in addition to forking a process to handle connections. We're going to need to link in some of that sftp code.
Revision
1440 -
Directory Listing
-
[select for diffs]
Modified
Thu Apr 3 17:47:01 2008 UTC
(16 years, 5 months ago)
by
laffer1
Diff to
previous 1439
,
to
selected 92
Found an additional integer overflow.
This version of the patch comes from NetBSD.
Also limits the range of getnumber to 0x00ffffff to ensure that adding two does not cause an overflow.
Revision
1419 -
Directory Listing
-
[select for diffs]
Modified
Mon Mar 17 00:02:17 2008 UTC
(16 years, 6 months ago)
by
laffer1
Diff to
previous 1418
,
to
selected 92
Fix spurious warnings from neighbor discovery when working with IPv6 over
point to point tunnels (gif).
This crops up when using one of the many IPV6 tunnel brokers, etc. with MidnightBSD.
Obtained from FreeBSD.
Revision
1398 -
Directory Listing
-
[select for diffs]
Modified
Sun Mar 2 20:39:32 2008 UTC
(16 years, 6 months ago)
by
laffer1
Diff to
previous 1397
,
to
selected 92
Update HID usage table according to the following:
* USB HID Usage Tables, V1.12
* USB Monitor Control Class Specification, V1.0
* USB Usage Tables for HID Power Devices, V1.0
* USB Device Class Definition for Physical Devices, V1.0
* USB HID Point of Sale Usage Tables, V1.02
Revision
1386 -
Directory Listing
-
[select for diffs]
Modified
Sun Mar 2 18:45:33 2008 UTC
(16 years, 6 months ago)
by
laffer1
Diff to
previous 1385
,
to
selected 92
Don't assume the lock is in use when reinitializing a lockuser. Only allocate a lockuser request if both watched and lockuser's requests are null. Fixes some random lockup behavior with some applications forking
Revision
1375 -
Directory Listing
-
[select for diffs]
Modified
Mon Jan 28 15:21:11 2008 UTC
(16 years, 7 months ago)
by
laffer1
Diff to
previous 1374
,
to
selected 92
NTP configuration change. When looking up entires in the resolver quickly, sometimes the same ip is selected as it's cacached briefly. This new configuration fixes that possiblity.
Revision
1372 -
Directory Listing
-
[select for diffs]
Modified
Mon Jan 21 20:21:07 2008 UTC
(16 years, 8 months ago)
by
laffer1
Diff to
previous 1371
,
to
selected 92
Add virtual machine detection in the loader. For QEMU, VBOX, VMware, or Parallels, set the hz setting to 100. This will fix "time" issues automatically in these environments.
Revision
1370 -
Directory Listing
-
[select for diffs]
Modified
Tue Jan 15 18:53:01 2008 UTC
(16 years, 8 months ago)
by
laffer1
Diff to
previous 1369
,
to
selected 92
PTY handling patch.
This is text from the FreeBSD advisory on the same issue:
If openpty(3) is called as non-root user the newly created
pseudo-terminal is world readable and writeable. While this is
documented to be the case, script(1) still uses openpty(3) and
script(1) may be used by non-root users [CVE-2008-0217].
The ptsname(3) function incorrectly extracts two characters from the
name of a device node in /dev without verifying that it's actually
operating on a valid pty which the calling user owns. pt_chown uses
the bad result from ptsname(3) to change ownership of a pty to the
user calling pt_chown [CVE-2008-0216].
Revision
1366 -
Directory Listing
-
[select for diffs]
Modified
Sat Jan 5 22:18:20 2008 UTC
(16 years, 8 months ago)
by
ctriv
Diff to
previous 1363
,
to
selected 92
Latest developement version of libmport.
Changes:
It is now possible to create, install, and delete packages from a system
with the library.
The install primative now uses the progress callback system to give the user
feedback during the install.
Support for installing into a chroot envirement is included at the library
level. This is useful if you have a GUI app and you don't want your entire
process stuck in the chroot.
Many function names have been changed in an effort to improve the library's
orginization.
Many bug fixes and subtle changes.
Todo:
Docs:
library overview.
function reference.
mport bundle specification.
The merge primative.
The fetch primative.
The update primative.
Top level functions to do things like "fetch this bundle, its depends, and
then install them all."
Some of the sematics are still up in the air. For example, gtk12 and
gtk2 both have a pkgname of gtk. libmport doesn't allow two package with
the same name to be installed.
Hard links are not implemented in a mport bundle.
Much more testing and bug fixing is needed.
Revision
1355 -
Directory Listing
-
[select for diffs]
Modified
Sat Dec 1 06:21:37 2007 UTC
(16 years, 9 months ago)
by
ctriv
Diff to
previous 1353
,
to
selected 92
sync with developement version.
Version comparison now works, but we might change the definition of "works"
in the near future. As crazy as the FreeBSD semantics are, they might be
useful.
All package files are now bundles. Typical package files are simply a
special case of a bundle only containting one package. There is no
performance penalty for many packages in one bundle at install time, and
there is only one code path for all installations.
pkg-deinstall script support has been added (but is not yet tested).
Many new functions for simplifing work. See mport_db_do(),
mport_db_prepare(), and mport_add_file_to_archive(), et al.
Revision
1347 -
Directory Listing
-
[select for diffs]
Modified
Sun Nov 25 18:05:17 2007 UTC
(16 years, 10 months ago)
by
laffer1
Diff to
previous 1346
,
to
selected 92
Fix from FreeBSD:
The kernel uses two ways to write data on a pipe:
o buffered write, for chunks smaller than PIPE_MINDIRECT bytes
o direct write, for everything else
A call to writev(2) may receive struct iov of various size and the
kernel may have to switch from one solution to the other. Before doing
this, it must wake reader processes and any select/poll/kqueue up.
This commit fixes a bug where select/poll/kqueue are not triggered
when switching from buffered write to direct write. It adds calls to
pipeselwakeup().
Revision
1316 -
Directory Listing
-
[select for diffs]
Modified
Fri Oct 26 15:25:43 2007 UTC
(16 years, 10 months ago)
by
laffer1
Diff to
previous 1315
,
to
selected 92
Add new rc.conf var... sendmail_rebuild_aliases with a setting of off.
Aliases will no longer be rebuilt automatically on startup. (FreeBSD 7.x+ behavior)
Revision
1297 -
Directory Listing
-
[select for diffs]
Modified
Tue Oct 23 14:46:25 2007 UTC
(16 years, 11 months ago)
by
laffer1
Diff to
previous 1296
,
to
selected 92
Remove libio as that was only for the alpha. I don't know why I added it in the previous revision. Also remove the files.
$MidnightBSD$ libbz2
work around libarchive so the system compiles.
Revision
1273 -
Directory Listing
-
[select for diffs]
Modified
Tue Oct 9 02:15:42 2007 UTC
(16 years, 11 months ago)
by
laffer1
Diff to
previous 1272
,
to
selected 92
newfs_msdos is very slow, especially when working with usb flash drives aka memory sticks.
To speed things up, use 128KB chunks for I/O as they do on Mac OS X. This patch is based on some code contributed to the freebsd file system mailing list by Mark Day @ apple.
I tested this on a Lexar 1GB stick that is only a few months old. Before the patch, newfs_msdos took about 2 minutes. Without the patch, the command returns nearly instantly. Obviously buffering is occuring. The file system seems to work fine, although I plan to do further testing.
Revision
1267 -
Directory Listing
-
[select for diffs]
Modified
Wed Oct 3 23:57:10 2007 UTC
(16 years, 11 months ago)
by
laffer1
Diff to
previous 1265
,
to
selected 92
Fix a security issue with openssl.
For applications using the SSL_get_shared_ciphers() function, the
buffer overflow could allow an attacker to crash or potentially
execute arbitrary code with the permissions of the user running the
application. (freebsd advisory text).
Revision
1262 -
Directory Listing
-
[select for diffs]
Modified
Fri Sep 28 22:17:23 2007 UTC
(16 years, 11 months ago)
by
laffer1
Diff to
previous 1261
,
to
selected 92
Remove $NetBSD$ tags in some cases as we're not going to be merging anything from that direction and it's in CVS.
Remove $FreeBSD$ on our ntpd as we've diverged.
add shutdown keyword to several services to end things cleanly. More work is required here.
Revision
1251 -
Directory Listing
-
[select for diffs]
Modified
Tue Sep 25 15:25:42 2007 UTC
(17 years ago)
by
laffer1
Diff to
previous 1250
,
to
selected 92
libc_r close() fails if fstat() returns an error. This causes problems with FreeBSD 4.x applications.
Since we don't control compat4x, this will never be fully resolved, but we can certainly fix our part.
Revision
1245 -
Directory Listing
-
[select for diffs]
Modified
Mon Sep 24 16:49:59 2007 UTC
(17 years ago)
by
ctriv
Diff to
previous 1244
,
to
selected 92
Added mport_parselist().
Conflicts and depends are now inserted into the package file db. The schema
of this will probably change once the install end is written and we know
what we need.
Revision
1241 -
Directory Listing
-
[select for diffs]
Modified
Sun Sep 23 22:30:52 2007 UTC
(17 years ago)
by
ctriv
Diff to
previous 1240
,
to
selected 92
Start of libmport. At the moment all it can do is a make a tmpdir with the
package-meta database. Soon we'll pull in libarchive and start to make some
packages.
Revision
1217 -
Directory Listing
-
[select for diffs]
Modified
Mon Sep 3 02:27:28 2007 UTC
(17 years ago)
by
laffer1
Diff to
previous 1216
,
to
selected 92
Don't treat failure to find the operator GID as a fatal
error; this made it impossible to use newfs (and mdmfs) when /etc/group
is missing and /etc is read-only.
Obtained from FreeBSD
Revision
1212 -
Directory Listing
-
[select for diffs]
Modified
Fri Aug 31 02:16:27 2007 UTC
(17 years ago)
by
laffer1
Diff to
previous 1211
,
to
selected 92
Enable ipfw kernel module by default.
Use the new desktop configuration.
Disable verbose display of rulesets on startup. (users get confused enough by the console)
Yes, we were going to use pf, but archite@ never completed the work. I got sick of waiting and know ipfw better. Besides, it's familiar to Mac users. This ruleset is very similar to the default apple ships with ipfw enabled.
Revision
1204 -
Directory Listing
-
[select for diffs]
Modified
Sat Aug 18 07:58:02 2007 UTC
(17 years, 1 month ago)
by
laffer1
Diff to
previous 1203
,
to
selected 92
Obtained from FreeBSD:
pam_nologin(8) starts to provide an account management function in
addition to the existing authentication function so that sshd(8) can
respect nologin(5) while the rest of PAM consumers work as earlier.
In turn, sshd(8) starts to use the new account management function
in pam_nologin(8) and thus respect nologin(5) even when doing public
key authentication with sshd's internal routines (PAM authentication
isn't called at all in that case).
Revision
1202 -
Directory Listing
-
[select for diffs]
Modified
Sat Aug 18 07:37:09 2007 UTC
(17 years, 1 month ago)
by
laffer1
Diff to
previous 1201
,
to
selected 92
$MidnightBSD$
Add PAM supoprt to cron. This will allow cron to skip commands by unavailable accounts depending on pam.conf for cron. This only effects personal crontabs and not /etc/crontab.
Also fix an issue with $HOME
Obtained from FreeBSD.
Revision
1188 -
Directory Listing
-
[select for diffs]
Modified
Sun Aug 12 07:53:21 2007 UTC
(17 years, 1 month ago)
by
laffer1
Diff to
previous 1187
,
to
selected 92
Our pax and cpio implementations do not support GNU style long options. This is causing me hell in the transition off GNU cpio. This adds some of the GNU longopts for cpio.
From NetBSD.
Revision
1175 -
Directory Listing
-
[select for diffs]
Modified
Fri Aug 10 00:44:49 2007 UTC
(17 years, 1 month ago)
by
laffer1
Diff to
previous 1174
,
to
selected 92
Fix the logic bug that caused the custom versions of warn(3) and
warnx(3) to be compiled on systems that have it (e.g. FreeBSD),
while the intention was opposite, i.e., compile them on systems
that don't have them. Also fixes static linkage of pkg_sign(1).
Revision
1153 -
Directory Listing
-
[select for diffs]
Modified
Wed Aug 8 02:27:19 2007 UTC
(17 years, 1 month ago)
by
laffer1
Diff to
previous 1152
,
to
selected 92
Forced commit to add:
The changes in the randomize_fd.c are pretty simple: Basically in the older algorithm you had to
walk thru the whole list element-by-element in order to reach an specific line and print it. This
process is rather slow in big lists (big files :)), since it had to go all the way from the head
of the list until it reached the element it randomly selected.
The new algorithm only changes the way we access the elements, basically after the whole file is
loaded up into the linked-list, we create an array of pointers to rand_node pointers, basically we
walk over the whole list once (after the whole file is loaded into the list) and map each address
into an array position (in the same order they were inserted on the list), after that whenever a
random number is selected, we dont need to walk the whole list until we reach it, we simply
rand_node_table[selected] it and get it in one move.
If the unique option is used, after a rand_node_table[selected] gets visited we set it to NULL
and if we reach that same slot afterwards, we simply go back and randomly select another number.
Pretty simple.
victor loureiro lima
Revision
1138 -
Directory Listing
-
[select for diffs]
Modified
Mon Aug 6 00:46:07 2007 UTC
(17 years, 1 month ago)
by
laffer1
Diff to
previous 1137
,
to
selected 92
New version creates a receipt instead of removing one. This is much easier to check for and handles the problem of mergemaster adding a new file, etc.
Revision
1137 -
Directory Listing
-
[select for diffs]
Modified
Mon Aug 6 00:23:51 2007 UTC
(17 years, 1 month ago)
by
laffer1
Diff to
previous 1133
,
to
selected 92
Add firstboot script to do last minute configuration.
Currently, we just want to install packages for GNUstep, X11, WindowMaker, and slim.
firstboot needs to start after the network is up so we intentionally position it after dhclient just in case.
Revision
1133 -
Directory Listing
-
[select for diffs]
Modified
Thu Aug 2 08:33:00 2007 UTC
(17 years, 1 month ago)
by
laffer1
Diff to
previous 1130
,
to
selected 92
Fix interaction with Windows 2000/XP servers. If a newly created directory has exactly 50 entries, an error is generated as smbfs grabs 52 items at a time. With . and .. this is 52. It then returns on the second trip and causes some apps like rsync to generate errors.
Revision
1113 -
Directory Listing
-
[select for diffs]
Modified
Fri Jul 27 21:32:46 2007 UTC
(17 years, 1 month ago)
by
laffer1
Diff to
previous 1112
,
to
selected 92
Let the fun begin.
Rebranded man page (mostly). There are still several errors and references to things like pesky alpha support.
Created a temporary hack to (hopefully) get BSD cpio working with the installation media. If this works, we'll need to make some adjustments as to not waste memory and/or replace the mediaBufferSize function with something that makes sense.
Revision
1101 -
Directory Listing
-
[select for diffs]
Modified
Thu Jul 26 17:08:59 2007 UTC
(17 years, 2 months ago)
by
laffer1
Diff to
previous 1100
,
to
selected 92
Intel/IBM Blades do not have keyboard devices and will hang. Avoid the hang with a timeout.
Apple intel-based Macs do not have a keyboard controller. Provide a timeout for these devices.
Revision
1098 -
Directory Listing
-
[select for diffs]
Modified
Thu Jul 26 14:16:22 2007 UTC
(17 years, 2 months ago)
by
laffer1
Diff to
previous 1097
,
to
selected 92
Remove picobsd and pc98 files. As pc98 machines have not be made in Japan for several years, there is little point for us to try to support it. FreeBSD has that niche.
I intentionally kept two apps within picobsd including the simple_httpd and PNG viewer which uses libvgl. There are few examples of using vgl, so I thought this might be fun to play with for now.
Revision
1069 -
Directory Listing
-
[select for diffs]
Modified
Mon Jul 23 07:22:01 2007 UTC
(17 years, 2 months ago)
by
laffer1
Diff to
previous 1068
,
to
selected 92
Experiment with removing cpio during most of the build process. Change base version to 0.2 for current. Correct the path for Distfiles as ctriv changed
the name from distfiles.
Revision
1065 -
Directory Listing
-
[select for diffs]
Modified
Sun Jul 22 07:57:59 2007 UTC
(17 years, 2 months ago)
by
laffer1
Diff to
previous 1064
,
to
selected 92
MidnightBSD has had a behavior where incoming packets were dropped if the MRU > MTU. If you had a device misconfigured on your network, for instance with jumbo frames, the network stack would drop packets. This is not a desired behavior in most cases.
However, some people like to experiment with the existing behavior or have other reasons such as detecting misconfigured devices. We now have a new sysctl net.link.ether.MTUisMRU which allows you to tune this behavior. 0 is the default and implies the stack will take all incoming packets that it can handle whereas 1 reverts to the old behavior.
This patch was inspired by work from Julian Elischer @ freebsd-net
Revision
1063 -
Directory Listing
-
[select for diffs]
Modified
Fri Jul 20 20:02:28 2007 UTC
(17 years, 2 months ago)
by
laffer1
Diff to
previous 1062
,
to
selected 92
Add a modified version of DragonFly's nrelease. We will initially use this to build MidnightBSD Live CD's and later for our own custom installer.
This should build a bootable live cd. I've been testing it on amd64 by first doing a buildworld and then cd nrelease; make buildiso; make mkiso
The CD must be in the first cdrom drive to work.
Revision
1061 -
Directory Listing
-
[select for diffs]
Modified
Fri Jul 20 12:03:35 2007 UTC
(17 years, 2 months ago)
by
laffer1
Diff to
previous 1060
,
to
selected 92
Fix a security issue with tcpdump. There is potential for remote system access in some cases. It is caused by the incorrect use of snprintf.
Our version is significantly out of date, but this issue needs attention now.
Revision
1006 -
Directory Listing
-
[select for diffs]
Modified
Wed May 23 17:26:02 2007 UTC
(17 years, 4 months ago)
by
ctriv
Diff to
previous 1005
,
to
selected 92
Security fix. When writing data to a buffer in the file_printf function, the
length of the unused portion of the bugger if not correctly tracked. See
FreeBSD SA-07:04.
Revision
1005 -
Directory Listing
-
[select for diffs]
Modified
Mon May 14 06:12:57 2007 UTC
(17 years, 4 months ago)
by
laffer1
Diff to
previous 1004
,
to
selected 92
$MidnightBSD$
Use unsigned comparisons. This fixes some bugs in the following case:
1. i386
2. program calling update is statically linked to libmd
3. buffer provided is aligned modulo 4 bytes
4. the buffer extends beyond 2 GB.
Bugs 1-3 still cause problems beyond 4GB.
Revision
992 -
Directory Listing
-
[select for diffs]
Modified
Thu May 3 05:41:47 2007 UTC
(17 years, 4 months ago)
by
laffer1
Diff to
previous 990
,
to
selected 92
UDP checksums are checked in place, overwriting whatever is there. This has the side effect of the ICMP code sending back the first eight bytes of the UDP payload with 2 bytes different.
Patch by Matthew Luckie.
Revision
988 -
Directory Listing
-
[select for diffs]
Modified
Tue May 1 17:59:06 2007 UTC
(17 years, 4 months ago)
by
laffer1
Diff to
previous 987
,
to
selected 92
A memory leak was reported. When an application uses a large number of threads, memory appears to be leaked. (clamav for instance)
free_tls does not free all memory in dtv which is allocated earlier by calloc. The function appears to use a very carefully constructed free loop. There could be side effects to this patch.
Test and MFC after 1 month.
Reported by Spencer Minear to the FreeBSD project.
Revision
983 -
Directory Listing
-
[select for diffs]
Modified
Fri Apr 27 20:29:07 2007 UTC
(17 years, 4 months ago)
by
laffer1
Diff to
previous 982
,
to
selected 92
This is equivalent to the recent OpenBSD discover of type 0 routing headers as insecure. There is now a sysctl to enable the behavior. Currently, this is not needed unless the host is acting as a router. In which case, ideally there should be firewall rules in place to protect the host. ipfw and pf do not offer solutions to protect systems entirely yet.
This patch is derived from the FreeBSD SA-07:03.ipv6 patch.
Revision
974 -
Directory Listing
-
[select for diffs]
Modified
Sun Apr 15 05:55:55 2007 UTC
(17 years, 5 months ago)
by
laffer1
Diff to
previous 973
,
to
selected 92
Source GNUstep.csh if it exists. This will save the user from sourcing this thing all the freaking time. openapp working by default is good :)
As we plan on installing GNUstep by default, this should be quite helpful.
Revision
934 -
Directory Listing
-
[select for diffs]
Modified
Tue Apr 10 05:34:55 2007 UTC
(17 years, 5 months ago)
by
laffer1
Diff to
previous 933
,
to
selected 92
3 additional files we are not importing.
__fpending is not supported by MidnightBSD. Its a Solaris thing which DF and Linux also happen to support. It checks the pending buffer on a stream.
lib/getdate.y does not work with our system yacc. It requires bison 1.875+.
Revision
933 -
Directory Listing
-
[select for diffs]
Modified
Tue Apr 10 05:30:11 2007 UTC
(17 years, 5 months ago)
by
laffer1
Diff to
previous 932
,
to
selected 92
Patches from Dragonfly.
Allow legacy tag/tagexpand options file used by all the BSD projects.
zlib.c: byte by byte to fix infinity waiting on some zlib operations while using compression.
Revision
931 -
Directory Listing
-
[select for diffs]
Modified
Tue Apr 10 05:24:03 2007 UTC
(17 years, 5 months ago)
by
laffer1
Diff to
previous 930
,
to
selected 92
Remove getdate.y as it does not build with our system yacc. Need bision 1.875+
closeout.c can not use __fpending as we do not have it in MidnightBSD.
Revision
929 -
Directory Listing
-
[select for diffs]
Modified
Tue Apr 10 05:19:02 2007 UTC
(17 years, 5 months ago)
by
laffer1
Diff to
previous 927
,
to
selected 92
Update for 1.12.13.
It was much simpler to update to this newer version of cvs than to fix the tag/tagexpand for $MidnightBSD$ type tags.
This is based on the patches from DragonFly with most of their extensinos. The manpages aren't updated yet.
One caveat, the __fpending libc/stdio function is missing in MidnightBSD. This is a Solarisism which was added to Linux and DragonFly. For now, we've simply deleted references to it. That means the pending buffer is not checked which may or may not be a real issue.
src/contrib/cvs/lib/getdate.y will not build with our system yacc. It requires a version of bison newer than 1.75 (1.875 worked). I will just commit the generated files instead.
Revision
909 -
Directory Listing
-
[select for diffs]
Modified
Sun Apr 8 19:54:01 2007 UTC
(17 years, 5 months ago)
by
archite
Diff to
previous 908
,
to
selected 92
Importing initial form of bsd.patch.mk. While this is not a final version,
nor is it truly usefull to anyone other than the security officer, this
should be contained in the cvs tree now. Please note that various updates
to this mk file will continue and do not depend on it being in this form.
Revision
908 -
Directory Listing
-
[select for diffs]
Modified
Sat Apr 7 02:17:03 2007 UTC
(17 years, 5 months ago)
by
laffer1
Diff to
previous 907
,
to
selected 92
Clean up the chroot patch. Remove SLOGGER definition since its no longer used. Go to WARNS 3 since there
are const errors with the second parameter of kenv. I could fix this with a const char [] definition for each entry,
but the current approach is easier to read.
This effectively equates to FreeBSD init.c 1.63 with some local changes. Like the previous chroot patch commit,
this is based on work by Oliver Fromme.
Revision
898 -
Directory Listing
-
[select for diffs]
Modified
Thu Apr 5 03:52:16 2007 UTC
(17 years, 5 months ago)
by
laffer1
Diff to
previous 897
,
to
selected 92
After adding pro police, we started failing one of the regression tests that we used to pass (mutex_d).
curthread can be NULL in some cases. This was causing the test app to crash.
Revision
886 -
Directory Listing
-
[select for diffs]
Modified
Mon Apr 2 00:48:03 2007 UTC
(17 years, 5 months ago)
by
archite
Diff to
previous 885
,
to
selected 92
Importing propolice into MidnightBSD. Propolice is going to
provide us with much greater security and stability in the
long run. If upgrading from a pre-propolice system, please
follow the these instructions:
cd /usr/src/lib/libc && make obj && make && make install
cd /usr/src/gnu/usr.bin/cc && make obj && make && make install
buildworld and kernel
It is adviced that any mports which were installed and/or built
prior to the propolice update also be updated. If any errors
or issue are encounted, please contact security@midnightbsd.org
and we will be sure to investigate and come up with an expeditious
fix.
Revision
884 -
Directory Listing
-
[select for diffs]
Modified
Fri Mar 30 05:36:52 2007 UTC
(17 years, 5 months ago)
by
ctriv
Diff to
previous 883
,
to
selected 92
Add a new variable, PORT_SYSTEM. If you set PORT_SYSTEM to "mport" in your
make.conf, your system will use the new mport package database and tools
instead of the old pkg_* binaries and /var/db/pkg.
Given that mport is in very early developement, and isn't even close to
alpha code yet, you will be ill advised to use it on your production
machine.
Revision
883 -
Directory Listing
-
[select for diffs]
Modified
Fri Mar 30 01:48:15 2007 UTC
(17 years, 5 months ago)
by
archite
Diff to
previous 882
,
to
selected 92
To avoid any confusion, the default PS1 for a user user with UID != 0
has been changed back to "$ ". Please update either ~/.profile or
~/.kshrc if you prefer to use the previous "> " PS1. While consistancy
is important, we have decided that we do not want to confuse anyone
who might mistake the previous PS1 for that of {t}csh's default prompt.
Revision
882 -
Directory Listing
-
[select for diffs]
Modified
Thu Mar 29 23:02:48 2007 UTC
(17 years, 5 months ago)
by
laffer1
Diff to
previous 881
,
to
selected 92
Increase LOMTU to 32768. The previous value was set in 1995. NetBSD has been using around 32k since the BSD 4.4 lite import.
My testing has shown 32768 is faster on some workloads. There is a very slight drop transfer large, cached data but uncached data showed a noticable improvement.
Revision
881 -
Directory Listing
-
[select for diffs]
Modified
Thu Mar 29 22:44:53 2007 UTC
(17 years, 5 months ago)
by
laffer1
Diff to
previous 880
,
to
selected 92
Remove WARNS from cpufreq Makefile. kernel source Makefiles should not use WANRS as it conflicts with kernel build options.
Add additional Pentium M cpus.
Revision
869 -
Directory Listing
-
[select for diffs]
Modified
Tue Mar 20 17:02:55 2007 UTC
(17 years, 6 months ago)
by
laffer1
Diff to
previous 868
,
to
selected 92
$MidnightBSD$
The __MBSDID macro is not working as it should be with the assembler. There must be a behavior difference between FBSDID and MBSDID somewhere.
Revision
844 -
Directory Listing
-
[select for diffs]
Modified
Thu Mar 15 02:07:21 2007 UTC
(17 years, 6 months ago)
by
laffer1
Diff to
previous 843
,
to
selected 92
Increment requests counter right before we send an arp query. Without this change, EHOSTDOWN errors could be reported which would be incorrect.
Revision
806 -
Directory Listing
-
[select for diffs]
Modified
Mon Mar 12 23:32:12 2007 UTC
(17 years, 6 months ago)
by
laffer1
Diff to
previous 805
,
to
selected 92
Add MidnightBSD_version. Until we correct newvers.sh, this will report the FreeBSD value. We must first remove all references to FreeBSD_version (OSRELDATE) from mports and the src tree before we can whack this.
Revision
800 -
Directory Listing
-
[select for diffs]
Modified
Mon Mar 12 21:17:04 2007 UTC
(17 years, 6 months ago)
by
laffer1
Diff to
previous 799
,
to
selected 92
Fill in the correct rtm_index for RTM_ADD and RTM_CHANGE messages.
Allow RTM_CHANGE to change a number of route flags as specified by RTF_FMASK.
The unusued rtm_use filed in struct rt_Msghdr is redesignated as rtm_fmask field to communicate route flag changes in RTM_CHANGE messages from userland. The use count of a route was moved to rtm_rmx some time ago.
Revision
796 -
Directory Listing
-
[select for diffs]
Modified
Mon Mar 12 20:59:27 2007 UTC
(17 years, 6 months ago)
by
laffer1
Diff to
previous 795
,
to
selected 92
Sound overhaul.
Fix 8bit int overflows during channel creation and destruction on vchans.
Enforce channel/chardev numbering within 8bit boundary.
Traverse d-channels SLIT and try to reclaim free counter during channel creation.
Determine open direction using 'flags', not mode.
Don't allow opening the same device twice. (WTF?)
O_RDWR is allowed, provided that it is done by a single open and the hardware supports full duplex.
Fix pcm_unregister memory leak.
Optimize channel allocation and numbering.
Mega vchan create/destroy cleanup.
Obtained from FreeBSD
Revision
789 -
Directory Listing
-
[select for diffs]
Modified
Mon Mar 12 20:28:30 2007 UTC
(17 years, 6 months ago)
by
laffer1
Diff to
previous 788
,
to
selected 92
If the buffer lock has waiters after the bufer has changed identity then getnewbuf() needs to drop the buffer in order to wake waiters that might sleep on the buffer in the context of the old identity.
Obtained from FreeBSD (tegge) 1.491.2.8
Revision
764 -
Directory Listing
-
[select for diffs]
Modified
Thu Mar 8 17:11:18 2007 UTC
(17 years, 6 months ago)
by
laffer1
Diff to
previous 763
,
to
selected 92
If an NFS server returns more than a few EJUKEBOX errors for a given RPC request, the NFS client will back off for a very long wait (days, weeks) before retrying.
Change behavior to match solaris. There is a new sysctl nfs3_jukebox_delay which is in seconds to adjust the retry default.
Revision
743 -
Directory Listing
-
[select for diffs]
Modified
Mon Feb 19 21:30:39 2007 UTC
(17 years, 7 months ago)
by
laffer1
Diff to
previous 742
,
to
selected 92
This is a patch from Andrew Turner to allow partial booting on EFIKA. It includes ofwread.S from NetBSD. It uses the real-mode ofw interface from NetBSD and TLB exception handlers from FreeBSD's perforce //depot/user/jaras.
The ofwr_init call is not enabled by default as it breaks Macs. If the ifdef FIRMWORKSBUGS is commented out, EFIKA will work until it hits the scheduler.
Revision
737 -
Directory Listing
-
[select for diffs]
Modified
Fri Feb 9 22:32:17 2007 UTC
(17 years, 7 months ago)
by
laffer1
Diff to
previous 736
,
to
selected 92
A type * (ANY) query response containing multiple RRsets can trigger an
assertion failure.
Certain recursive queries can cause the nameserver to crash by using memory
which has already been freed.
Revision
729 -
Directory Listing
-
[select for diffs]
Modified
Wed Feb 7 15:50:03 2007 UTC
(17 years, 7 months ago)
by
laffer1
Diff to
previous 728
,
to
selected 92
TCP Auto sizing of socket buffers improves throughput on high latency links. Several new sysctls were added to control the buffers max size, etc.
Additional work is needed, but under initial testing this is working great. You must rebulid world in order for netstat to work correctly.
A few changes were made to netstat, but do not change functionality in any significant way.
Revision
712 -
Directory Listing
-
[select for diffs]
Modified
Sun Jan 28 18:22:15 2007 UTC
(17 years, 7 months ago)
by
laffer1
Diff to
previous 711
,
to
selected 92
Add additonal PATA controllers found on newer motherboards.
This specifically fixes the INTEL DP965LT which I happen to be using. Many Intel motherboards use one of these chips.
Revision
710 -
Directory Listing
-
[select for diffs]
Modified
Wed Jan 24 00:59:09 2007 UTC
(17 years, 8 months ago)
by
laffer1
Diff to
previous 708
,
to
selected 92
The jail rc.d script does not check if a path inside a jail is a symbolic link before it uses a path.
/var/log/console.log and mounting/unmounting file systems inside the jail structure are not checked.
As such, the jail system is vulnerable to symlink attacks.
Revision
696 -
Directory Listing
-
[select for diffs]
Modified
Fri Jan 19 03:23:17 2007 UTC
(17 years, 8 months ago)
by
laffer1
Diff to
previous 695
,
to
selected 92
Fix up IPXIP so that the network stack is run with Giant. There is unsafety in the code that requires this change for SMP systems to function properly.
Revision
689 -
Directory Listing
-
[select for diffs]
Modified
Fri Jan 19 02:33:24 2007 UTC
(17 years, 8 months ago)
by
laffer1
Diff to
previous 688
,
to
selected 92
Clear the interupt source flags before processing the interupt events and turn off NIC interrupts while in the interrupt handler.
Relax the watchdog timer somewhat; don't enable it until the last packet is enqueued and if there is a TX interrupt but there are still outstanding ones reload the timer.
Revision
669 -
Directory Listing
-
[select for diffs]
Modified
Thu Jan 18 03:44:01 2007 UTC
(17 years, 8 months ago)
by
laffer1
Diff to
previous 668
,
to
selected 92
Revert to setting vlan and vlandev parameters synchronously, as soon as both have been read from the command line. Still use the callback, but this time only to verify that both vlan and vlandev have been found on the command line.
Revision
668 -
Directory Listing
-
[select for diffs]
Modified
Thu Jan 18 03:39:19 2007 UTC
(17 years, 8 months ago)
by
laffer1
Diff to
previous 667
,
to
selected 92
When a process is de-configuring a log file, also stop all of its PMCs that require a log file to operate.
Only stop PMCs that are in the running state.
Revision
618 -
Directory Listing
-
[select for diffs]
Modified
Sat Jan 13 15:00:24 2007 UTC
(17 years, 8 months ago)
by
laffer1
Diff to
previous 617
,
to
selected 92
Further refine the bridge hack in teh arp code. Only do the special arp handling for interfaces which are actually in the bridge group, ignore all others.
Revision
603 -
Directory Listing
-
[select for diffs]
Modified
Sat Jan 13 13:51:19 2007 UTC
(17 years, 8 months ago)
by
laffer1
Diff to
previous 602
,
to
selected 92
Handling of login.access(5) was moved from login(1) to pam_login_access(8) years ago. This will remove dead code, clean up manpages and install login.access.5 from the pam_login_access src dir.
Revision
591 -
Directory Listing
-
[select for diffs]
Modified
Sat Jan 13 00:10:35 2007 UTC
(17 years, 8 months ago)
by
laffer1
Diff to
previous 590
,
to
selected 92
Reduce needless DNS query by lookup only appropriate address family.
Specify appropraite hints to getaddrinfo(3).
Obtain address family from peername in inetd mode.
Revision
583 -
Directory Listing
-
[select for diffs]
Modified
Fri Jan 12 23:33:32 2007 UTC
(17 years, 8 months ago)
by
laffer1
Diff to
previous 582
,
to
selected 92
Throw out all the logical APIC ID stuff and just wire up the interrupts to individual CPUs using physical addressing and fixed delivery mode.
Revision
556 -
Directory Listing
-
[select for diffs]
Modified
Sun Jan 7 22:14:28 2007 UTC
(17 years, 8 months ago)
by
laffer1
Diff to
previous 555
,
to
selected 92
Fix random popping while playing in 32bit by increasing the buffer size.
Fix severe crackling under repetative module load/unload.
Make sure DMA pointer is properly aligned to avoid trunication by caller.
Add ac97 inverted external amplifier quirk for Maxselect x710s. (russian)
Trim unnecessary pointer alignment.
Revision
550 -
Directory Listing
-
[select for diffs]
Modified
Sun Jan 7 04:40:58 2007 UTC
(17 years, 8 months ago)
by
laffer1
Diff to
previous 549
,
to
selected 92
Have TCP Inflight disable itself if RTT is too low.
sysctl net.inet.tcp.inflight.rttthresh specifies the threshold in milliseconds below which it will disengage inflight. It defaults to 10ms.
Revision
534 -
Directory Listing
-
[select for diffs]
Modified
Sun Jan 7 03:50:23 2007 UTC
(17 years, 8 months ago)
by
laffer1
Diff to
previous 533
,
to
selected 92
Apply some patches from FreeBSD 6.1 Release for cpu detection, ioctl fixes, etc.
Change i386 GENERIC kernel to include VESA and raster support so that end users can easily switch to 800x600 and other video modes in the console. While the kernel size is larger, it makes more sense on a desktop.
Revision
525 -
Directory Listing
-
[select for diffs]
Modified
Sat Jan 6 19:25:01 2007 UTC
(17 years, 8 months ago)
by
laffer1
Diff to
previous 524
,
to
selected 92
We haven't decided on how we're going to build or store the website documentation in the future yet. This will sync some problems with the imported docs in case we decide to do something with them. If not, its a handy reference until our own documentation is in place.
Revision
522 -
Directory Listing
-
[select for diffs]
Modified
Sat Jan 6 19:13:19 2007 UTC
(17 years, 8 months ago)
by
laffer1
Diff to
previous 521
,
to
selected 92
Add option -w to specify graph width. Default width is terminal width.
Fix the way the median is calculated.
Obtained from FreeBSD 6.1 Release.
Revision
519 -
Directory Listing
-
[select for diffs]
Modified
Sat Jan 6 06:02:29 2007 UTC
(17 years, 8 months ago)
by
laffer1
Diff to
previous 518
,
to
selected 92
Add a spinlock to handles cases where printf, etc are called simultaneously. This should fix console freezes in some circumstances.
This patch was based on a similar patch to FreeBSD stable, however, we do not use the new "enhanced" syscons code so it will require further testing. It works fine on a UNI box.
Revision
515 -
Directory Listing
-
[select for diffs]
Modified
Sat Jan 6 01:16:44 2007 UTC
(17 years, 8 months ago)
by
laffer1
Diff to
previous 514
,
to
selected 92
Check the return code of sc_clean_up() in the only place missing. There is only one case where it can fail in wait_scrn_saver_stop(), but might as well check.
Revision
514 -
Directory Listing
-
[select for diffs]
Modified
Sat Jan 6 01:11:46 2007 UTC
(17 years, 8 months ago)
by
laffer1
Diff to
previous 513
,
to
selected 92
Sometimes the vty switching has to be delayed; the vty to be switched is saved in sc->delayed_next_scr and toe actual switch happens later. It is possible to get into an endless loop when trying to switch to a closed vty.
To repeat:
boot single user
run kbdcontrol -b visual
quickly press alt + f2 twice.
Revision
508 -
Directory Listing
-
[select for diffs]
Modified
Wed Jan 3 03:24:21 2007 UTC
(17 years, 8 months ago)
by
laffer1
Diff to
previous 507
,
to
selected 92
Remove ealloc and sprite headers. ealloc is now provided by libutil and the few definitions needed in sprite.h have been moved.
Switch to c99 stdbool.
Revision
502 -
Directory Listing
-
[select for diffs]
Modified
Tue Jan 2 20:04:03 2007 UTC
(17 years, 8 months ago)
by
laffer1
Diff to
previous 501
,
to
selected 92
Make local changes to mdoc.local to give us .Mx for MidnightBSD. Also include recent OS releases from the other BSDs so we can reference them.
Inspired from DragonFly. OpenBSD releases are missing.
Revision
501 -
Directory Listing
-
[select for diffs]
Modified
Tue Jan 2 09:50:08 2007 UTC
(17 years, 8 months ago)
by
laffer1
Diff to
previous 500
,
to
selected 92
Add -o and -p options from DragonFly.
-0 keyword causes rcorder to generate the dependancy list required to execute
a particular keyword.
-p generated PROVIDE keywords for the specified files.
TODO: document these.
Revision
499 -
Directory Listing
-
[select for diffs]
Modified
Tue Jan 2 08:13:30 2007 UTC
(17 years, 8 months ago)
by
laffer1
Diff to
previous 498
,
to
selected 92
Do not pass through the tailing newline char form ctime(3) output to
setproctitle(3) in order to get rid of the \n escape sequence in ps(1) output
of a dump(8) process.
Revision
493 -
Directory Listing
-
[select for diffs]
Modified
Tue Jan 2 07:52:31 2007 UTC
(17 years, 8 months ago)
by
laffer1
Diff to
previous 492
,
to
selected 92
Obtained from FreeBSD:
Be more like Windows and Linux and send our hostname in the host-name
option if none is given in the config file. Also add #ifdefd out
support for sending a client ID based on our MAC address.
PR: bin/94743, bin/76401
Submitted by: Frank Behrens <frank at pinky dot sax dot de>
Revision
492 -
Directory Listing
-
[select for diffs]
Modified
Tue Jan 2 07:51:20 2007 UTC
(17 years, 8 months ago)
by
laffer1
Diff to
previous 491
,
to
selected 92
Obtained from FreeBSD:
It is possible for bpf to return a length such that:
length != BPF_WORDALIGN(length)
This meeans that it is possible for this to be true:
interface->rbuf_offset > interface->rbuf_len
Handle this case in the test for running out of packets. While
OpenBSD's solution of setting interface->rbuf_len to
BPF_WORDALIGN(length) is safe due to the size of the buffer, I think
this solution results in less hidden assumptions.
This should fix the problem of dhclient running away and consuming 100%
CPU.
PR: bin/102226
Submitted by: Joost Bekkers <joost at jodocus.org>
Revision
454 -
Directory Listing
-
[select for diffs]
Modified
Sun Dec 31 21:10:52 2006 UTC
(17 years, 8 months ago)
by
laffer1
Diff to
previous 453
,
to
selected 92
Just to clarify compatiblity, we've merged all changes between the import date of Feb 24 and the tcsh Feb 26 commit in FreeBSD. Bump the version number.
Revision
440 -
Directory Listing
-
[select for diffs]
Modified
Sun Dec 31 09:59:48 2006 UTC
(17 years, 8 months ago)
by
laffer1
Diff to
previous 439
,
to
selected 92
Add NetBSD efun(3) functions...
esetfunc, easprintf, efopen, ecalloc, emalloc, erealloc, estrdup, estrlcat, estrlcpy, evasprintf
Some code in the tree already includes this such as fsck and rcorder. This will make NetBSD code porting easier. Note our libutil uses libutil.h instead of util.h.
Revision
437 -
Directory Listing
-
[select for diffs]
Modified
Sun Dec 31 08:58:59 2006 UTC
(17 years, 8 months ago)
by
laffer1
Diff to
previous 436
,
to
selected 92
Replace 4k mbuf clusters with PAGE_SIZE clusters. This should improve TCP/IP performance.
Also add new MidnightBSD_version which will someday replace osreldate etc.
Revision
435 -
Directory Listing
-
[select for diffs]
Modified
Sun Dec 31 07:08:37 2006 UTC
(17 years, 8 months ago)
by
laffer1
Diff to
previous 434
,
to
selected 92
Add spell(1) from NetBSD. spell is a spell check program originating from Version 6 AT&T UNIX. It was opened up by Caldera and cleaned up by Todd Miller at OpenBSD, then additonal work was done by perry @ NetBSD.
I've decided to place the dictionary files in src/share/dict/* to keep usr.bin clean. The code is not very clean and could use improvement. I've left the NetBSD TODO for this purpose.
Revision
409 -
Directory Listing
-
[select for diffs]
Modified
Thu Dec 28 01:24:38 2006 UTC
(17 years, 8 months ago)
by
laffer1
Diff to
previous 408
,
to
selected 92
Sync with FreeBSD RELENG_6_2.
Reparent the process that executes the window= command from the ttys to the init. This prevents zombies from being accumulated.
Revision
390 -
Directory Listing
-
[select for diffs]
Modified
Wed Dec 27 23:54:55 2006 UTC
(17 years, 8 months ago)
by
laffer1
Diff to
previous 389
,
to
selected 92
Check the entire length of the current argument for the EOF string, but don't assume an ANSI string and thus don't use strcmp(3) which looks for NUL.
Revision
385 -
Directory Listing
-
[select for diffs]
Modified
Wed Dec 27 23:38:19 2006 UTC
(17 years, 8 months ago)
by
laffer1
Diff to
previous 384
,
to
selected 92
Import getent(1), a program which retrieves and displays entries from the administrative database such as hosts, using the lookup order in nsswitch.conf(5).
Imported from FreeBSD, NetBSD.
Revision
374 -
Directory Listing
-
[select for diffs]
Modified
Wed Dec 27 04:51:23 2006 UTC
(17 years, 8 months ago)
by
laffer1
Diff to
previous 373
,
to
selected 92
Look for BSD label at 512-byte offset, if not found on the very beginning of the second sector. This makes it compatible with labels created by disklabel(8) on non-512-byte-per-sector devices.
Import from FreeBSD.
Revision
373 -
Directory Listing
-
[select for diffs]
Modified
Wed Dec 27 04:48:57 2006 UTC
(17 years, 8 months ago)
by
laffer1
Diff to
previous 372
,
to
selected 92
Delay an orphan event if provider has still in-flight I/O requests. GEOM classes can then detach safely from the provider when an orphan event is received. Fixes a 'detach with active requests' panic for gstripe/gconcat under load.
Imported/Obtained from FreeBSD.
Revision
371 -
Directory Listing
-
[select for diffs]
Modified
Wed Dec 27 04:45:12 2006 UTC
(17 years, 8 months ago)
by
laffer1
Diff to
previous 370
,
to
selected 92
Add g_duplicate_bio() function which does the same thing as g_clone_bio() except it allocates new bio with a M_WAITOK flag.
sys/geom/geom.h
sys/geom/geom_io.c
Import from FreeBSD.
Revision
361 -
Directory Listing
-
[select for diffs]
Modified
Wed Dec 27 02:32:32 2006 UTC
(17 years, 8 months ago)
by
laffer1
Diff to
previous 360
,
to
selected 92
Remove additional alpha bit...
Don't create stray objects on pc98. We may still support pc98.
Detect that the audit group is missing earlier during install.
Revision
360 -
Directory Listing
-
[select for diffs]
Modified
Wed Dec 27 02:27:33 2006 UTC
(17 years, 8 months ago)
by
laffer1
Diff to
previous 359
,
to
selected 92
Don't attempt to compile DEFAULTS and don't attempt to compile LINT twice.
Do not discard the current value of __MAKE_CONF when testing whether MAKEOBJDIRPREFIX is set at a wrong place.
Revision
354 -
Directory Listing
-
[select for diffs]
Modified
Wed Dec 27 01:15:48 2006 UTC
(17 years, 8 months ago)
by
laffer1
Diff to
previous 353
,
to
selected 92
Change burncd so that if CDRIOCGETPROGRESS does not return a good value, CDIOCRESET is used to determine when the command is complete.
This corrects a bug with some CD/DVD recorders working with rewritable media where they never complete.
Based on a patch by Luigi Rizzo on stable@freebsd.org.
Revision
351 -
Directory Listing
-
[select for diffs]
Modified
Tue Dec 26 22:26:03 2006 UTC
(17 years, 8 months ago)
by
laffer1
Diff to
previous 350
,
to
selected 92
We now have a MidnightBSD CVSup server. Make changes to allow users to access stargazer directly, remove files not needed, and fix comments.
Revision
342 -
Directory Listing
-
[select for diffs]
Modified
Thu Dec 21 16:47:20 2006 UTC
(17 years, 9 months ago)
by
laffer1
Diff to
previous 341
,
to
selected 92
Fix some race conditions in TTY code. tty and sessrele(), doenterpgrp(), leavepgrp(), pgdelete() and enterpgrp(). The tty code is still under giant lock, but the session/pgrp release code just used proctree_locks. P_CONTROLT isn't really fully locked too in enterpgrp().
Obtained from FreeBSD, mbr.
Revision
341 -
Directory Listing
-
[select for diffs]
Modified
Thu Dec 21 16:31:26 2006 UTC
(17 years, 9 months ago)
by
laffer1
Diff to
previous 340
,
to
selected 92
Retest tp->t_session because Giant might have been temporarily dropped while waiting for proctree_lock, allowing for an intervening tty_close() that cleared tp_>t_session.
Obtained from FreeBSD,tegge.
Revision
340 -
Directory Listing
-
[select for diffs]
Modified
Thu Dec 21 16:22:39 2006 UTC
(17 years, 9 months ago)
by
laffer1
Diff to
previous 339
,
to
selected 92
Consistently use if_printf() only in interface methods: if_start, if_ioctl, if_watchdog, etc or in functions that are used by these methods only. In all other cases, device_printf should be used.
This also fixes several panics when if_printf() is called before softc->ifp was initialized.
Revision
339 -
Directory Listing
-
[select for diffs]
Modified
Thu Dec 21 16:18:09 2006 UTC
(17 years, 9 months ago)
by
laffer1
Diff to
previous 338
,
to
selected 92
IF_LLADDR does not necessarily return aligned memory addresses. Since accessing ID registers in rt181x9 needs 32bit register access and RL_IDR6/RL_IDR7 registers are reserved registers bzero() is needed before copying the ethernet address.
This fixes a bug in Sparc64
Obtained from FreeBSD, yongari.
Revision
338 -
Directory Listing
-
[select for diffs]
Modified
Mon Dec 18 23:50:50 2006 UTC
(17 years, 9 months ago)
by
laffer1
Diff to
previous 337
,
to
selected 92
As discussed on freebsd-threads@freebsd.org, a libpthread bug exists that this patch by Peter Edwards Corrects.
Here is a summary:
I've a problem when a process uses:
libpthread
detached threads
mixed bound/unbound threads
suspended threads (a la pthread_resume_np())
whereby some newly created suspended threads don't get scheduled.
I think I've tracked it down, so if someone could review the
reasoning, I'd be grateful.
Newly launched threads have a "struct pthread" that may be allocated
from a freelist of GCed threads. Apparently, when detached threads
enter the GCed list, they can still have the "active" flag set on
them. Later, this causes problems when this thread is recycled and
resumed, because _thr_setrunnable_unlocked() doesn't add it to a
run queue.
thr_cleanup can be called either from the bound-threads scheduler,
or the unbound scheduler. One callsite clears "active", "needswitchout",
and "lock_switch" to zero before the call. The other callsite just
clears "check_pending". I think these flags are all either bound-thread
or unbound-thread specific, and that there was an unintended
assumption that the thread would remain with the same "boundedness"
after being recycled, which isn't neccessarily the case. (Or another
way - the idea was that there was no need to clear the "active"
flag on a bound thread, as its only used for unbound threads, but
a GCed bound thread might be recycled into an unbound thread)
Given that, it seems correct to clean up the thread the same way
for both cases, and just move that code into thr_cleanup.
Revision
330 -
Directory Listing
-
[select for diffs]
Modified
Fri Nov 24 19:41:57 2006 UTC
(17 years, 10 months ago)
by
laffer1
Diff to
previous 329
,
to
selected 92
Check that -w width is not above maximum. Use DWIDTH constant instead of a hard coded constant.
Reported by Gruzicki Wlodek on Bugtraq.
Obtained from FreeBSD, NetBSD, and OpenBSD.
Revision
321 -
Directory Listing
-
[select for diffs]
Modified
Mon Oct 30 18:51:07 2006 UTC
(17 years, 10 months ago)
by
laffer1
Diff to
previous 320
,
to
selected 92
i915 attachment and running fixed.
i915 vblank support.
Radeon's new memory map support.
ATI PCI/PCIE GART fix.
r300 fixes
Hack to radeon module to shut up errors.
Obtained from FreeBSD stable
Revision
319 -
Directory Listing
-
[select for diffs]
Modified
Mon Oct 30 16:55:24 2006 UTC
(17 years, 10 months ago)
by
laffer1
Diff to
previous 318
,
to
selected 92
Be reasonable when overwrite mode is enabled and there are hard links. Overwriting when links > 1 will cause data loss.
Obtained from FreeBSD, OpenBSD.
Revision
314 -
Directory Listing
-
[select for diffs]
Modified
Mon Oct 30 14:50:16 2006 UTC
(17 years, 10 months ago)
by
laffer1
Diff to
previous 313
,
to
selected 92
Only catch SIGINFO when LIBPTHREAD_DEBUG is defined in the environment.
Eliminate a race condition in timed waist (cv, mutex, sleeps).
Don't forget to init a TAILQ before using it.
Allocate a thread's tcb last so it is easier to handle failures to malloc() siginfo.
Include needed headers obtained through pthread.h
Obtained from FreeBSD (March 2006 MFC)
Revision
298 -
Directory Listing
-
[select for diffs]
Modified
Sat Oct 28 04:16:57 2006 UTC
(17 years, 10 months ago)
by
laffer1
Diff to
previous 297
,
to
selected 92
Don't set CR0_NE and CR0_MP in npx_probe() as they are already set earlier in cpu_setregs().
If we know this CPU has a FPU via cpuid, just assume INT16 and make the dmesg quiet. This is true for all Pentium class processors and even some 486DX systems.
Revision
281 -
Directory Listing
-
[select for diffs]
Modified
Thu Oct 26 21:17:32 2006 UTC
(17 years, 10 months ago)
by
laffer1
Diff to
previous 280
,
to
selected 92
Part 2 of our large ata update. Most of these changes come from FreeBSD 6-stable or 6.1 Release. We should be at least at 6.1 release levels with our support for devices with this commit.
Add support for the JMicron JMB361, 365 and 366 chips.
Make the ATAPI sense data accessible when using the ioctl interface.
Revision
276 -
Directory Listing
-
[select for diffs]
Modified
Wed Oct 18 15:52:35 2006 UTC
(17 years, 11 months ago)
by
laffer1
Diff to
previous 275
,
to
selected 92
Avoid a warning for each whiteout found during ls -lW
# ls -lW
total 2
-rw-r--r-- 1 root wheel 6 Oct 18 14:46 file1
ls: ./file2: No such file or directory
w--------- 0 root wheel 0 Jan 1 1970 file2
From FreeBSD rev 1.76
Revision
267 -
Directory Listing
-
[select for diffs]
Modified
Fri Oct 13 23:15:50 2006 UTC
(17 years, 11 months ago)
by
laffer1
Diff to
previous 266
,
to
selected 92
Only use the channel in the request given to ata_completed if
its still present.
Only look for ICRC and CORR errors on ATA devices not ATAPI.
Get rid of all the long long and mixint casting in printfs'.
On all our platforms intmax == int64_t so simply using %j to
print int64_ts' is safe all over, and doesn't pollute the code.
Update atapi-fd to support direct devices such as disks.
ATAUSB will need to hook inot the delayed boot identity to
have interrupts running, so externalize it.
Add USB modes.
Revision
266 -
Directory Listing
-
[select for diffs]
Modified
Fri Oct 13 20:43:48 2006 UTC
(17 years, 11 months ago)
by
laffer1
Diff to
previous 265
,
to
selected 92
Keep the parent device (channel) around in ata_request so that we don't
panic on device removal or failure.
Clean up ata_fail_requests to prevent the queue mnging to fail.
Ensure ata_reinit does things in the right order to prevent panics.
Revision
244 -
Directory Listing
-
[select for diffs]
Modified
Tue Oct 10 15:23:51 2006 UTC
(17 years, 11 months ago)
by
laffer1
Diff to
previous 243
,
to
selected 92
Fix bug in malloc_uninit():
Releasing items from the mt_zone can not be done by a simple uma_zfree() call since mt_zone is allocated with the UMA_ZONE_MALLOC flag. Use uma_zfree_arg instead and supply the slam.
This bug can cause panics in low memory conditions while unloading kernel modules containing MALLOC_DEFINE(...) statements.
This commit brings kern_malloc.c up to FreeBSD 6.1 release equivalency.
Revision
227 -
Directory Listing
-
[select for diffs]
Modified
Sun Oct 8 15:06:27 2006 UTC
(17 years, 11 months ago)
by
laffer1
Diff to
previous 226
,
to
selected 92
Fix the case where the user specifies an alternate heading for some output format keyword and the keyword they picked is an alias to some other keyword. This includes the segfault fixes. (FreeBSD)
Revision
221 -
Directory Listing
-
[select for diffs]
Modified
Sun Oct 8 06:07:29 2006 UTC
(17 years, 11 months ago)
by
laffer1
Diff to
previous 220
,
to
selected 92
When enabling A20 put upper limit on amount of time we wait for the keyboard controller to get ready (65K x ISA access time, visually around 1 second). If we have wait more than that amount it's likely that the hardware is a legacy-free system and doesn't have a keyboard controller and doesn't require enabling A20 at all.
This makes cdboot/pxeldr work on MacBook Pro systems with Boot Camp and some IBM Netvista systems such as the S40.
Revision
173 -
Directory Listing
-
[select for diffs]
Modified
Sun Sep 17 02:37:31 2006 UTC
(18 years ago)
by
laffer1
Diff to
previous 172
,
to
selected 92
Update from 6.0.5 to 6.1.4 Intel driver. This update adds support for one additional NIC and hopefully will fix some problems with the em found on some Dell gx260's negotiating below gigabit speeds!
Revision
166 -
Directory Listing
-
[select for diffs]
Modified
Sat Sep 9 13:48:40 2006 UTC
(18 years ago)
by
laffer1
Diff to
previous 165
,
to
selected 92
Changed -p flag to -D for "Date". Cleaned up the manual. The utility now checks the length of the format argument and gives an error immediately.
I do not want cat to become a general purpose filter, but this functionality seems quite useful.
Revision
165 -
Directory Listing
-
[select for diffs]
Modified
Fri Sep 8 14:04:24 2006 UTC
(18 years ago)
by
laffer1
Diff to
previous 164
,
to
selected 92
A new flag, -p, was added to cat which allows dates to be prepended to each line of output. This could be useful when logging from scripts, etc.
The format is based on strftime
so cat -p %D test might print out
09/08/06testing this
if the file test contained testing this.
This is based on a patch floating around FreeBSD-Current.
Revision
164 -
Directory Listing
-
[select for diffs]
Modified
Thu Sep 7 18:52:52 2006 UTC
(18 years ago)
by
laffer1
Diff to
previous 163
,
to
selected 92
recursive DNS server, a remote attacker sending enough recursive
queries for the replies to arrive after all the interested clients
have left the recursion queue will trigger an INSIST failure in the
named(8) daemon. Also for a a recursive DNS server, an assertion
failure can occour when processing a query whose reply will contain
more than one SIG(covered) RRset.
For an authoritative DNS server serving a RFC 2535 DNSSEC zone which
is queried for the SIG records where there are multiple SIG(covered)
RRsets (e.g. a zone apex), named(8) will trigger an assertion failure
when it tries to construct the response.
Revision
162 -
Directory Listing
-
[select for diffs]
Modified
Wed Sep 6 14:57:43 2006 UTC
(18 years ago)
by
laffer1
Diff to
previous 161
,
to
selected 92
Work around a deadlock when ATA waits for the taskqueue to call back for completion and something else is holding the taskqueue waiting for ATA to return.
Fixes the "semaphore timeout !! DANGER Will Robinson !!" messages. This patch was obtained from FreeBSD ata-queue.c 1.50.2.3 (march 1 2006) and ata-all.h from the same time.
Revision
134 -
Directory Listing
-
[select for diffs]
Modified
Sun Aug 27 18:49:41 2006 UTC
(18 years ago)
by
laffer1
Diff to
previous 133
,
to
selected 92
Added Eric Anderson's patch for cp which adds -a an -l flags.
-a is an archive mode which is equivalent to -PpR
-l is link mode where regular files are hard linked instead of copied.
Revision
133 -
Directory Listing
-
[select for diffs]
Modified
Fri Aug 25 06:24:52 2006 UTC
(18 years, 1 month ago)
by
laffer1
Diff to
previous 132
,
to
selected 92
ACPI patches for laptops and other changes related to the new sleep_queue / em driver commit.
if_media was updated to allow import of bce and some baudrate changes in vge.
Revision
131 -
Directory Listing
-
[select for diffs]
Modified
Fri Aug 25 06:20:58 2006 UTC
(18 years, 1 month ago)
by
laffer1
Diff to
previous 130
,
to
selected 92
Patched ACPI problem in hwpcm which needs further testing. randomdev was updated along with it.
mii had a bug with recently driver patches as a function was missing to set the ifmedia_baudrate(). The function was added elsewhere.
Revision
120 -
Directory Listing
-
[select for diffs]
Modified
Thu Aug 24 05:35:39 2006 UTC
(18 years, 1 month ago)
by
laffer1
Diff to
previous 119
,
to
selected 92
Intel gigabit network driver (em) updated to 6.05 with FreeBSD 6-stable enhancements. Commit required a sync to a new version of the sleep queue routines which also fixed a deadlock problem. An ACPI issue with some laptops has been noted and a fix will be forthcoming.
Revision
117 -
Directory Listing
-
[select for diffs]
Modified
Thu Aug 24 00:18:42 2006 UTC
(18 years, 1 month ago)
by
laffer1
Diff to
previous 116
,
to
selected 92
rdate's -c flag was not working as -DLEAPSECONDS was not used in the base system to maintain posix compliance. Instead, rdate was altered to read a "right" subdirectory just as openbsd does. In right, leapsecond versions of all the zones are built so that we can maintain legal time if needed.
Revision
99 -
Directory Listing
-
[select for diffs]
Modified
Mon Aug 21 05:54:56 2006 UTC
(18 years, 1 month ago)
by
laffer1
Diff to
previous 98
,
to
selected 92
Do to naming conflicts, openntpd had to be commited to its own directory src/contrib/openntpd. This commit should clean up most of the mess. I should plan these things out more carefully. :)
Revision
94 -
Directory Listing
-
[select for diffs]
Modified
Sun Aug 20 23:06:33 2006 UTC
(18 years, 1 month ago)
by
laffer1
Diff to
previous 92
This commit was generated by cvs2svn to compensate for changes in r93, which
included commits to RCS files with non-trunk default branches.
Revision
92 -
Directory Listing
-
[selected]
Modified
Sun Aug 20 23:01:33 2006 UTC
(18 years, 1 month ago)
by
adam
Diff to
previous 90
*** empty log message ***
Revision
46 -
Directory Listing
-
[select for diffs]
Modified
Fri Aug 4 17:10:41 2006 UTC
(18 years, 1 month ago)
by
laffer1
Diff to
previous 45
,
to
selected 92
FreeBSD-SA6:13 and 14 were patched. The nis software and amd athlon fpu handling fixed. Changes to echo and pfctl are needed to fix compile bugs with changes related to cvs tags and macros.
Revision
6 -
Directory Listing
-
[select for diffs]
Modified
Sat Feb 25 02:38:42 2006 UTC
(18 years, 6 months ago)
by
laffer1
Diff to
previous 3
,
to
selected 92
This commit was generated by cvs2svn to compensate for changes in r5, which
included commits to RCS files with non-trunk default branches.
Revision
3 -
Directory Listing
-
[select for diffs]
Modified
Sat Feb 25 02:29:52 2006 UTC
(18 years, 6 months ago)
by
laffer1
Diff to
previous 2
,
to
selected 92
This commit was generated by cvs2svn to compensate for changes in r2, which
included commits to RCS files with non-trunk default branches.