| 1 |
# |
| 2 |
# $FreeBSD: src/Makefile.inc1,v 1.499.2.7 2006/01/07 19:40:08 netchild Exp $ |
| 3 |
# $MidnightBSD: src/Makefile.inc1,v 1.11 2008/10/05 21:14:01 laffer1 Exp $ |
| 4 |
# |
| 5 |
# Make command line options: |
| 6 |
# -DNO_CLEANDIR run ${MAKE} clean, instead of ${MAKE} cleandir |
| 7 |
# -DNO_CLEAN do not clean at all |
| 8 |
# -DNO_SHARE do not go into share subdir |
| 9 |
# -DNO_KERNELCONFIG do not run config in ${MAKE} buildkernel |
| 10 |
# -DNO_KERNELCLEAN do not run ${MAKE} clean in ${MAKE} buildkernel |
| 11 |
# -DNO_KERNELDEPEND do not run ${MAKE} depend in ${MAKE} buildkernel |
| 12 |
# -DNO_PORTSUPDATE do not update ports in ${MAKE} update |
| 13 |
# -DNO_DOCUPDATE do not update doc in ${MAKE} update |
| 14 |
# LOCAL_DIRS="list of dirs" to add additional dirs to the SUBDIR list |
| 15 |
# TARGET="machine" to crossbuild world for a different machine type |
| 16 |
|
| 17 |
# |
| 18 |
# The intended user-driven targets are: |
| 19 |
# buildworld - rebuild *everything*, including glue to help do upgrades |
| 20 |
# installworld- install everything built by "buildworld" |
| 21 |
# doxygen - build API documentation of the kernel |
| 22 |
# update - convenient way to update your source tree (eg: cvsup/cvs) |
| 23 |
# |
| 24 |
# Standard targets (not defined here) are documented in the makefiles in |
| 25 |
# /usr/share/mk. These include: |
| 26 |
# obj depend all install clean cleandepend cleanobj |
| 27 |
|
| 28 |
.include <bsd.own.mk> |
| 29 |
|
| 30 |
# We must do share/info early so that installation of info `dir' |
| 31 |
# entries works correctly. Do it first since it is less likely to |
| 32 |
# grow dependencies on include and lib than vice versa. |
| 33 |
# |
| 34 |
# We must do lib/ and libexec/ before bin/, because if installworld |
| 35 |
# installs a new /bin/sh, the 'make' command will *immediately* |
| 36 |
# use that new version. And the new (dynamically-linked) /bin/sh |
| 37 |
# will expect to find appropriate libraries in /lib and /libexec. |
| 38 |
# |
| 39 |
SUBDIR= share/info lib libexec |
| 40 |
SUBDIR+=bin |
| 41 |
.if ${MK_GAMES} != "no" |
| 42 |
SUBDIR+=games |
| 43 |
.endif |
| 44 |
.if ${MK_CDDL} != "no" |
| 45 |
SUBDIR+=cddl |
| 46 |
.endif |
| 47 |
SUBDIR+=gnu include |
| 48 |
.if ${MK_KERBEROS} != "no" |
| 49 |
SUBDIR+=kerberos5 |
| 50 |
.endif |
| 51 |
.if ${MK_RESCUE} != "no" |
| 52 |
SUBDIR+=rescue |
| 53 |
.endif |
| 54 |
SUBDIR+=sbin |
| 55 |
.if ${MK_CRYPT} != "no" |
| 56 |
SUBDIR+=secure |
| 57 |
.endif |
| 58 |
.if !defined(NO_SHARE) |
| 59 |
SUBDIR+=share |
| 60 |
.endif |
| 61 |
SUBDIR+=sys usr.bin usr.sbin |
| 62 |
# |
| 63 |
# We must do etc/ last for install/distribute to work. |
| 64 |
# |
| 65 |
SUBDIR+=etc |
| 66 |
|
| 67 |
# These are last, since it is nice to at least get the base system |
| 68 |
# rebuilt before you do them. |
| 69 |
.for _DIR in ${LOCAL_DIRS} |
| 70 |
.if exists(${.CURDIR}/${_DIR}/Makefile) |
| 71 |
SUBDIR+= ${_DIR} |
| 72 |
.endif |
| 73 |
.endfor |
| 74 |
|
| 75 |
.if defined(SUBDIR_OVERRIDE) |
| 76 |
SUBDIR= ${SUBDIR_OVERRIDE} |
| 77 |
.endif |
| 78 |
|
| 79 |
.if defined(NOCLEAN) |
| 80 |
NO_CLEAN= ${NOCLEAN} |
| 81 |
.endif |
| 82 |
.if defined(NO_CLEANDIR) |
| 83 |
CLEANDIR= clean cleandepend |
| 84 |
.else |
| 85 |
CLEANDIR= cleandir |
| 86 |
.endif |
| 87 |
|
| 88 |
CVS?= cvs |
| 89 |
CVSFLAGS?= -r . -P -d -I! |
| 90 |
SUP?= /usr/bin/csup |
| 91 |
SUPFLAGS?= -g -L 2 |
| 92 |
.if defined(SUPHOST) |
| 93 |
SUPFLAGS+= -h ${SUPHOST} |
| 94 |
.endif |
| 95 |
|
| 96 |
MAKEOBJDIRPREFIX?= /usr/obj |
| 97 |
.if !defined(OSRELDATE) |
| 98 |
.if exists(/usr/include/osreldate.h) |
| 99 |
OSRELDATE!= awk '/^\#define[[:space:]]*__FreeBSD_version/ { print $$3 }' \ |
| 100 |
/usr/include/osreldate.h |
| 101 |
.else |
| 102 |
OSRELDATE= 0 |
| 103 |
.endif |
| 104 |
.endif |
| 105 |
|
| 106 |
# Guess machine architecture from machine type, and vice versa. |
| 107 |
.if !defined(TARGET_ARCH) && defined(TARGET) |
| 108 |
TARGET_ARCH= ${TARGET:S/pc98/i386/:S/sun4v/sparc64/} |
| 109 |
.elif !defined(TARGET) && defined(TARGET_ARCH) && \ |
| 110 |
${TARGET_ARCH} != ${MACHINE_ARCH} |
| 111 |
TARGET= ${TARGET_ARCH} |
| 112 |
.endif |
| 113 |
# Otherwise, default to current machine type and architecture. |
| 114 |
TARGET?= ${MACHINE} |
| 115 |
TARGET_ARCH?= ${MACHINE_ARCH} |
| 116 |
|
| 117 |
KNOWN_ARCHES?= amd64 arm i386 i386/pc98 ia64 powerpc sparc64 sparc64/sun4v |
| 118 |
.if ${TARGET} == ${TARGET_ARCH} |
| 119 |
_t= ${TARGET} |
| 120 |
.else |
| 121 |
_t= ${TARGET_ARCH}/${TARGET} |
| 122 |
.endif |
| 123 |
.for _t in ${_t} |
| 124 |
.if empty(KNOWN_ARCHES:M${_t}) |
| 125 |
.error Unknown target ${TARGET_ARCH}:${TARGET}. |
| 126 |
.endif |
| 127 |
.endfor |
| 128 |
|
| 129 |
.if ${TARGET} == ${MACHINE} |
| 130 |
TARGET_CPUTYPE?=${CPUTYPE} |
| 131 |
.else |
| 132 |
TARGET_CPUTYPE?= |
| 133 |
.endif |
| 134 |
|
| 135 |
.if !empty(TARGET_CPUTYPE) |
| 136 |
_TARGET_CPUTYPE=${TARGET_CPUTYPE} |
| 137 |
.else |
| 138 |
_TARGET_CPUTYPE=dummy |
| 139 |
.endif |
| 140 |
_CPUTYPE!= MAKEFLAGS= CPUTYPE=${_TARGET_CPUTYPE} ${MAKE} \ |
| 141 |
-f /dev/null -m ${.CURDIR}/share/mk -V CPUTYPE |
| 142 |
.if ${_CPUTYPE} != ${_TARGET_CPUTYPE} |
| 143 |
.error CPUTYPE global should be set with ?=. |
| 144 |
.endif |
| 145 |
.if make(buildworld) |
| 146 |
BUILD_ARCH!= uname -p |
| 147 |
.if ${MACHINE_ARCH} != ${BUILD_ARCH} |
| 148 |
.error To cross-build, set TARGET_ARCH. |
| 149 |
.endif |
| 150 |
.endif |
| 151 |
.if ${MACHINE} == ${TARGET} && !defined(CROSS_BUILD_TESTING) |
| 152 |
OBJTREE= ${MAKEOBJDIRPREFIX} |
| 153 |
.else |
| 154 |
OBJTREE= ${MAKEOBJDIRPREFIX}/${TARGET} |
| 155 |
.endif |
| 156 |
WORLDTMP= ${OBJTREE}${.CURDIR}/tmp |
| 157 |
# /usr/games added for fortune which depend on strfile |
| 158 |
BPATH= ${WORLDTMP}/legacy/usr/sbin:${WORLDTMP}/legacy/usr/bin:${WORLDTMP}/legacy/usr/games |
| 159 |
XPATH= ${WORLDTMP}/usr/sbin:${WORLDTMP}/usr/bin:${WORLDTMP}/usr/games |
| 160 |
STRICTTMPPATH= ${BPATH}:${XPATH} |
| 161 |
TMPPATH= ${STRICTTMPPATH}:${PATH} |
| 162 |
|
| 163 |
INSTALLTMP!= /usr/bin/mktemp -d -u -t install |
| 164 |
|
| 165 |
# |
| 166 |
# Building a world goes through the following stages |
| 167 |
# |
| 168 |
# 1. legacy stage [BMAKE] |
| 169 |
# This stage is responsible for creating compatibility |
| 170 |
# shims that are needed by the bootstrap-tools, |
| 171 |
# build-tools and cross-tools stages. |
| 172 |
# 1. bootstrap-tools stage [BMAKE] |
| 173 |
# This stage is responsible for creating programs that |
| 174 |
# are needed for backward compatibility reasons. They |
| 175 |
# are not built as cross-tools. |
| 176 |
# 2. build-tools stage [TMAKE] |
| 177 |
# This stage is responsible for creating the object |
| 178 |
# tree and building any tools that are needed during |
| 179 |
# the build process. |
| 180 |
# 3. cross-tools stage [XMAKE] |
| 181 |
# This stage is responsible for creating any tools that |
| 182 |
# are needed for cross-builds. A cross-compiler is one |
| 183 |
# of them. |
| 184 |
# 4. world stage [WMAKE] |
| 185 |
# This stage actually builds the world. |
| 186 |
# 5. install stage (optional) [IMAKE] |
| 187 |
# This stage installs a previously built world. |
| 188 |
# |
| 189 |
|
| 190 |
BOOTSTRAPPING?= 0 |
| 191 |
|
| 192 |
# Common environment for world related stages |
| 193 |
CROSSENV= MAKEOBJDIRPREFIX=${OBJTREE} \ |
| 194 |
MACHINE_ARCH=${TARGET_ARCH} \ |
| 195 |
MACHINE=${TARGET} \ |
| 196 |
CPUTYPE=${TARGET_CPUTYPE} \ |
| 197 |
GROFF_BIN_PATH=${WORLDTMP}/legacy/usr/bin \ |
| 198 |
GROFF_FONT_PATH=${WORLDTMP}/legacy/usr/share/groff_font \ |
| 199 |
GROFF_TMAC_PATH=${WORLDTMP}/legacy/usr/share/tmac |
| 200 |
|
| 201 |
# bootstrap-tools stage |
| 202 |
BMAKEENV= INSTALL="sh ${.CURDIR}/tools/install.sh" \ |
| 203 |
PATH=${BPATH}:${PATH} \ |
| 204 |
WORLDTMP=${WORLDTMP} \ |
| 205 |
MAKEFLAGS="-m ${.CURDIR}/tools/build/mk ${.MAKEFLAGS}" |
| 206 |
BMAKE= MAKEOBJDIRPREFIX=${WORLDTMP} \ |
| 207 |
${BMAKEENV} ${MAKE} -f Makefile.inc1 \ |
| 208 |
DESTDIR= \ |
| 209 |
BOOTSTRAPPING=${OSRELDATE} \ |
| 210 |
-DWITHOUT_HTML -DWITHOUT_INFO -DNO_LINT -DWITHOUT_MAN \ |
| 211 |
-DWITHOUT_NLS -DNO_PIC -DWITHOUT_PROFILE -DNO_SHARED \ |
| 212 |
-DNO_CPU_CFLAGS -DNO_WARNS |
| 213 |
|
| 214 |
# build-tools stage |
| 215 |
TMAKE= MAKEOBJDIRPREFIX=${OBJTREE} \ |
| 216 |
${BMAKEENV} ${MAKE} -f Makefile.inc1 \ |
| 217 |
TARGET=${TARGET} TARGET_ARCH=${TARGET_ARCH} \ |
| 218 |
DESTDIR= \ |
| 219 |
BOOTSTRAPPING=${OSRELDATE} -DNO_LINT -DNO_CPU_CFLAGS -DNO_WARNS |
| 220 |
|
| 221 |
# cross-tools stage |
| 222 |
XMAKE= TOOLS_PREFIX=${WORLDTMP} ${BMAKE} \ |
| 223 |
TARGET=${TARGET} TARGET_ARCH=${TARGET_ARCH} \ |
| 224 |
-DWITHOUT_GDB |
| 225 |
|
| 226 |
# world stage |
| 227 |
WMAKEENV= ${CROSSENV} \ |
| 228 |
_SHLIBDIRPREFIX=${WORLDTMP} \ |
| 229 |
INSTALL="sh ${.CURDIR}/tools/install.sh" \ |
| 230 |
PATH=${TMPPATH} |
| 231 |
WMAKE= ${WMAKEENV} ${MAKE} -f Makefile.inc1 DESTDIR=${WORLDTMP} |
| 232 |
|
| 233 |
.if ${TARGET_ARCH} == "amd64" |
| 234 |
# 32 bit world |
| 235 |
LIB32TMP= ${OBJTREE}${.CURDIR}/lib32 |
| 236 |
|
| 237 |
.if empty(TARGET_CPUTYPE) |
| 238 |
LIB32CPUTYPE= k8 |
| 239 |
.else |
| 240 |
LIB32CPUTYPE= ${TARGET_CPUTYPE} |
| 241 |
.endif |
| 242 |
LIB32FLAGS= -m32 -march=${LIB32CPUTYPE} -mfancy-math-387 -DCOMPAT_32BIT \ |
| 243 |
-iprefix ${LIB32TMP}/usr/ \ |
| 244 |
-L${LIB32TMP}/usr/lib32 \ |
| 245 |
-B${LIB32TMP}/usr/lib32 |
| 246 |
|
| 247 |
# Yes, the flags are redundant. |
| 248 |
LIB32WMAKEENV= MAKEOBJDIRPREFIX=${OBJTREE}/lib32 \ |
| 249 |
_SHLIBDIRPREFIX=${LIB32TMP} \ |
| 250 |
MACHINE=i386 \ |
| 251 |
MACHINE_ARCH=i386 \ |
| 252 |
INSTALL="sh ${.CURDIR}/tools/install.sh" \ |
| 253 |
PATH=${TMPPATH} \ |
| 254 |
CC="${CC} ${LIB32FLAGS}" \ |
| 255 |
CXX="${CXX} ${LIB32FLAGS}" \ |
| 256 |
OBJC="${OBJC} ${LIB32FLAGS}" \ |
| 257 |
LD="${LD} -m elf_i386_fbsd -Y P,${LIB32TMP}/usr/lib32" \ |
| 258 |
AS="${AS} --32" \ |
| 259 |
LIBDIR=/usr/lib32 \ |
| 260 |
SHLIBDIR=/usr/lib32 |
| 261 |
|
| 262 |
LIB32WMAKE= ${LIB32WMAKEENV} ${MAKE} -DNO_CPU_CFLAGS -DCOMPAT_32BIT \ |
| 263 |
-DWITHOUT_BIND -DWITHOUT_MAN -DWITHOUT_NLS -DWITHOUT_INFO \ |
| 264 |
-DWITHOUT_HTML DESTDIR=${LIB32TMP} |
| 265 |
LIB32IMAKE= ${LIB32WMAKE:NINSTALL=*:NDESTDIR=*} -DNO_INCS |
| 266 |
.endif |
| 267 |
|
| 268 |
# install stage |
| 269 |
.if empty(.MAKEFLAGS:M-n) |
| 270 |
IMAKEENV= ${CROSSENV} \ |
| 271 |
PATH=${STRICTTMPPATH}:${INSTALLTMP} |
| 272 |
.else |
| 273 |
IMAKEENV= ${CROSSENV} \ |
| 274 |
PATH=${TMPPATH}:${INSTALLTMP} |
| 275 |
.endif |
| 276 |
IMAKE= ${IMAKEENV} ${MAKE} -f Makefile.inc1 |
| 277 |
|
| 278 |
# kernel stage |
| 279 |
KMAKEENV= ${WMAKEENV} |
| 280 |
KMAKE= ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} |
| 281 |
|
| 282 |
# |
| 283 |
# buildworld |
| 284 |
# |
| 285 |
# Attempt to rebuild the entire system, with reasonable chance of |
| 286 |
# success, regardless of how old your existing system is. |
| 287 |
# |
| 288 |
_worldtmp: |
| 289 |
.if ${.CURDIR:C/[^,]//g} != "" |
| 290 |
# The m4 build of sendmail files doesn't like it if ',' is used |
| 291 |
# anywhere in the path of it's files. |
| 292 |
@echo |
| 293 |
@echo "*** Error: path to source tree contains a comma ','" |
| 294 |
@echo |
| 295 |
false |
| 296 |
.endif |
| 297 |
@echo |
| 298 |
@echo "--------------------------------------------------------------" |
| 299 |
@echo ">>> Rebuilding the temporary build tree" |
| 300 |
@echo "--------------------------------------------------------------" |
| 301 |
.if !defined(NO_CLEAN) |
| 302 |
rm -rf ${WORLDTMP} |
| 303 |
.if ${TARGET_ARCH} == "amd64" |
| 304 |
rm -rf ${LIB32TMP} |
| 305 |
.endif |
| 306 |
.else |
| 307 |
rm -rf ${WORLDTMP}/legacy/usr/include |
| 308 |
# XXX - These two can depend on any header file. |
| 309 |
rm -f ${OBJTREE}${.CURDIR}/usr.bin/kdump/ioctl.c |
| 310 |
rm -f ${OBJTREE}${.CURDIR}/usr.bin/truss/ioctl.c |
| 311 |
.endif |
| 312 |
.for _dir in \ |
| 313 |
usr/bin usr/games usr/include/sys usr/lib \ |
| 314 |
usr/libexec usr/sbin usr/share/dict \ |
| 315 |
usr/share/groff_font/devX100 \ |
| 316 |
usr/share/groff_font/devX100-12 \ |
| 317 |
usr/share/groff_font/devX75 \ |
| 318 |
usr/share/groff_font/devX75-12 \ |
| 319 |
usr/share/groff_font/devascii \ |
| 320 |
usr/share/groff_font/devcp1047 \ |
| 321 |
usr/share/groff_font/devdvi \ |
| 322 |
usr/share/groff_font/devhtml \ |
| 323 |
usr/share/groff_font/devkoi8-r \ |
| 324 |
usr/share/groff_font/devlatin1 \ |
| 325 |
usr/share/groff_font/devlbp \ |
| 326 |
usr/share/groff_font/devlj4 \ |
| 327 |
usr/share/groff_font/devps \ |
| 328 |
usr/share/groff_font/devutf8 \ |
| 329 |
usr/share/tmac/mdoc usr/share/tmac/mm |
| 330 |
mkdir -p ${WORLDTMP}/legacy/${_dir} |
| 331 |
.endfor |
| 332 |
.for _dir in \ |
| 333 |
lib usr/bin usr/include usr/lib/compat/aout usr/libdata/ldscripts \ |
| 334 |
usr/libexec usr/sbin usr/share/misc |
| 335 |
mkdir -p ${WORLDTMP}/${_dir} |
| 336 |
.endfor |
| 337 |
mtree -deU -f ${.CURDIR}/etc/mtree/BSD.include.dist \ |
| 338 |
-p ${WORLDTMP}/usr/include >/dev/null |
| 339 |
ln -sf ${.CURDIR}/sys ${WORLDTMP} |
| 340 |
.if ${MK_BIND_LIBS} != "no" |
| 341 |
mtree -deU -f ${.CURDIR}/etc/mtree/BIND.include.dist \ |
| 342 |
-p ${WORLDTMP}/usr/include >/dev/null |
| 343 |
.endif |
| 344 |
_legacy: |
| 345 |
@echo |
| 346 |
@echo "--------------------------------------------------------------" |
| 347 |
@echo ">>> stage 1.1: legacy release compatibility shims" |
| 348 |
@echo "--------------------------------------------------------------" |
| 349 |
${_+_}cd ${.CURDIR}; ${BMAKE} legacy |
| 350 |
_bootstrap-tools: |
| 351 |
@echo |
| 352 |
@echo "--------------------------------------------------------------" |
| 353 |
@echo ">>> stage 1.2: bootstrap tools" |
| 354 |
@echo "--------------------------------------------------------------" |
| 355 |
${_+_}cd ${.CURDIR}; ${BMAKE} bootstrap-tools |
| 356 |
_cleanobj: |
| 357 |
.if !defined(NO_CLEAN) |
| 358 |
@echo |
| 359 |
@echo "--------------------------------------------------------------" |
| 360 |
@echo ">>> stage 2.1: cleaning up the object tree" |
| 361 |
@echo "--------------------------------------------------------------" |
| 362 |
${_+_}cd ${.CURDIR}; ${WMAKE} ${CLEANDIR:S/^/par-/} |
| 363 |
.if ${TARGET_ARCH} == "amd64" |
| 364 |
${_+_}cd ${.CURDIR}; ${LIB32WMAKE} -f Makefile.inc1 ${CLEANDIR:S/^/par-/} |
| 365 |
.endif |
| 366 |
.endif |
| 367 |
_obj: |
| 368 |
@echo |
| 369 |
@echo "--------------------------------------------------------------" |
| 370 |
@echo ">>> stage 2.2: rebuilding the object tree" |
| 371 |
@echo "--------------------------------------------------------------" |
| 372 |
${_+_}cd ${.CURDIR}; ${WMAKE} par-obj |
| 373 |
_build-tools: |
| 374 |
@echo |
| 375 |
@echo "--------------------------------------------------------------" |
| 376 |
@echo ">>> stage 2.3: build tools" |
| 377 |
@echo "--------------------------------------------------------------" |
| 378 |
${_+_}cd ${.CURDIR}; ${TMAKE} build-tools |
| 379 |
_cross-tools: |
| 380 |
@echo |
| 381 |
@echo "--------------------------------------------------------------" |
| 382 |
@echo ">>> stage 3: cross tools" |
| 383 |
@echo "--------------------------------------------------------------" |
| 384 |
${_+_}cd ${.CURDIR}; ${XMAKE} cross-tools |
| 385 |
_includes: |
| 386 |
@echo |
| 387 |
@echo "--------------------------------------------------------------" |
| 388 |
@echo ">>> stage 4.1: building includes" |
| 389 |
@echo "--------------------------------------------------------------" |
| 390 |
${_+_}cd ${.CURDIR}; ${WMAKE} SHARED=symlinks par-includes |
| 391 |
_libraries: |
| 392 |
@echo |
| 393 |
@echo "--------------------------------------------------------------" |
| 394 |
@echo ">>> stage 4.2: building libraries" |
| 395 |
@echo "--------------------------------------------------------------" |
| 396 |
${_+_}cd ${.CURDIR}; \ |
| 397 |
${WMAKE} -DNO_FSCHG -DWITHOUT_HTML -DWITHOUT_INFO -DNO_LINT \ |
| 398 |
-DWITHOUT_MAN -DWITHOUT_NLS -DWITHOUT_PROFILE libraries |
| 399 |
_depend: |
| 400 |
@echo |
| 401 |
@echo "--------------------------------------------------------------" |
| 402 |
@echo ">>> stage 4.3: make dependencies" |
| 403 |
@echo "--------------------------------------------------------------" |
| 404 |
${_+_}cd ${.CURDIR}; ${WMAKE} par-depend |
| 405 |
everything: |
| 406 |
@echo |
| 407 |
@echo "--------------------------------------------------------------" |
| 408 |
@echo ">>> stage 4.4: building everything" |
| 409 |
@echo "--------------------------------------------------------------" |
| 410 |
${_+_}cd ${.CURDIR}; ${WMAKE} par-all |
| 411 |
.if ${TARGET_ARCH} == "amd64" |
| 412 |
build32: |
| 413 |
@echo |
| 414 |
@echo "--------------------------------------------------------------" |
| 415 |
@echo ">>> stage 5.1: building 32 bit shim libraries" |
| 416 |
@echo "--------------------------------------------------------------" |
| 417 |
.for _dir in \ |
| 418 |
usr/include usr/lib32 usr/share/misc |
| 419 |
mkdir -p ${LIB32TMP}/${_dir} |
| 420 |
.endfor |
| 421 |
mtree -deU -f ${.CURDIR}/etc/mtree/BSD.include.dist \ |
| 422 |
-p ${LIB32TMP}/usr/include >/dev/null |
| 423 |
mkdir -p ${WORLDTMP} |
| 424 |
ln -sf ${.CURDIR}/sys ${WORLDTMP} |
| 425 |
.if ${MK_KERBEROS} != "no" |
| 426 |
.for _t in obj depend all |
| 427 |
cd ${.CURDIR}/kerberos5/tools; \ |
| 428 |
MAKEOBJDIRPREFIX=${OBJTREE}/lib32 ${MAKE} DESTDIR= ${_t} |
| 429 |
.endfor |
| 430 |
.endif |
| 431 |
.for _t in obj includes |
| 432 |
cd ${.CURDIR}/include; ${LIB32WMAKE} ${_t} |
| 433 |
cd ${.CURDIR}/lib; ${LIB32WMAKE} ${_t} |
| 434 |
.if ${MK_CDDL} != "no" |
| 435 |
cd ${.CURDIR}/cddl/lib; ${LIB32WMAKE} ${_t} |
| 436 |
.endif |
| 437 |
cd ${.CURDIR}/gnu/lib; ${LIB32WMAKE} ${_t} |
| 438 |
.if ${MK_CRYPT} != "no" |
| 439 |
cd ${.CURDIR}/secure/lib; ${LIB32WMAKE} ${_t} |
| 440 |
.endif |
| 441 |
.if ${MK_KERBEROS} != "no" |
| 442 |
cd ${.CURDIR}/kerberos5/lib; ${LIB32WMAKE} ${_t} |
| 443 |
.endif |
| 444 |
.endfor |
| 445 |
.for _dir in usr.bin/lex/lib |
| 446 |
cd ${.CURDIR}/${_dir}; ${LIB32WMAKE} obj |
| 447 |
.endfor |
| 448 |
.for _dir in lib/ncurses/ncurses lib/ncurses/ncursesw lib/libmagic |
| 449 |
cd ${.CURDIR}/${_dir}; \ |
| 450 |
MAKEOBJDIRPREFIX=${OBJTREE}/lib32 ${MAKE} DESTDIR= build-tools |
| 451 |
.endfor |
| 452 |
cd ${.CURDIR}; \ |
| 453 |
${LIB32WMAKE} -f Makefile.inc1 libraries |
| 454 |
.for _t in obj depend all |
| 455 |
cd ${.CURDIR}/libexec/rtld-elf; \ |
| 456 |
PROG=ld-elf32.so.1 ${LIB32WMAKE} ${_t} |
| 457 |
.endfor |
| 458 |
|
| 459 |
distribute32 install32: |
| 460 |
.if make(distribute32) |
| 461 |
mkdir -p ${DISTDIR}/${DISTRIBUTION}/usr/lib32 # XXX add to mtree |
| 462 |
.else |
| 463 |
mkdir -p ${DESTDIR}/usr/lib32 # XXX add to mtree |
| 464 |
.endif |
| 465 |
cd ${.CURDIR}/lib; ${LIB32IMAKE} ${.TARGET:S/32$//} |
| 466 |
cd ${.CURDIR}/gnu/lib; ${LIB32IMAKE} ${.TARGET:S/32$//} |
| 467 |
.if ${MK_CRYPT} != "no" |
| 468 |
cd ${.CURDIR}/secure/lib; ${LIB32IMAKE} ${.TARGET:S/32$//} |
| 469 |
.endif |
| 470 |
cd ${.CURDIR}/libexec/rtld-elf; PROG=ld-elf32.so.1 ${LIB32IMAKE} ${.TARGET:S/32$//} |
| 471 |
.endif |
| 472 |
|
| 473 |
|
| 474 |
WMAKE_TGTS= |
| 475 |
.if !defined(SUBDIR_OVERRIDE) |
| 476 |
WMAKE_TGTS+= _worldtmp _legacy _bootstrap-tools |
| 477 |
.endif |
| 478 |
WMAKE_TGTS+= _cleanobj _obj _build-tools |
| 479 |
.if !defined(SUBDIR_OVERRIDE) |
| 480 |
WMAKE_TGTS+= _cross-tools |
| 481 |
.endif |
| 482 |
WMAKE_TGTS+= _includes _libraries _depend everything |
| 483 |
.if ${TARGET_ARCH} == "amd64" && ${MK_LIB32} != "no" |
| 484 |
WMAKE_TGTS+= build32 |
| 485 |
.endif |
| 486 |
|
| 487 |
buildworld: buildworld_prologue ${WMAKE_TGTS} buildworld_epilogue |
| 488 |
.ORDER: buildworld_prologue ${WMAKE_TGTS} buildworld_epilogue |
| 489 |
|
| 490 |
buildworld_prologue: |
| 491 |
@echo "--------------------------------------------------------------" |
| 492 |
@echo ">>> World build started on `LC_ALL=C date`" |
| 493 |
@echo "--------------------------------------------------------------" |
| 494 |
|
| 495 |
buildworld_epilogue: |
| 496 |
@echo |
| 497 |
@echo "--------------------------------------------------------------" |
| 498 |
@echo ">>> World build completed on `LC_ALL=C date`" |
| 499 |
@echo "--------------------------------------------------------------" |
| 500 |
|
| 501 |
# |
| 502 |
# We need to have this as a target because the indirection between Makefile |
| 503 |
# and Makefile.inc1 causes the correct PATH to be used, rather than a |
| 504 |
# modification of the current environment's PATH. In addition, we need |
| 505 |
# to quote multiword values. |
| 506 |
# |
| 507 |
buildenvvars: |
| 508 |
@echo ${WMAKEENV:Q} |
| 509 |
|
| 510 |
buildenv: |
| 511 |
@echo Entering world for ${TARGET_ARCH}:${TARGET} |
| 512 |
@cd ${.CURDIR} && env ${WMAKEENV} sh || true |
| 513 |
|
| 514 |
TOOLCHAIN_TGTS= ${WMAKE_TGTS:N_depend:Neverything:Nbuild32} |
| 515 |
toolchain: ${TOOLCHAIN_TGTS} |
| 516 |
kernel-toolchain: ${TOOLCHAIN_TGTS:N_includes:N_libraries} |
| 517 |
|
| 518 |
# |
| 519 |
# installcheck |
| 520 |
# |
| 521 |
# Checks to be sure system is ready for installworld/installkernel. |
| 522 |
# |
| 523 |
installcheck: |
| 524 |
|
| 525 |
# |
| 526 |
# Require DESTDIR to be set if installing for a different architecture. |
| 527 |
# |
| 528 |
.if ${TARGET_ARCH} != ${MACHINE_ARCH} || ${TARGET} != ${MACHINE} |
| 529 |
.if !make(distributeworld) |
| 530 |
installcheck: installcheck_DESTDIR |
| 531 |
installcheck_DESTDIR: |
| 532 |
.if !defined(DESTDIR) || empty(DESTDIR) |
| 533 |
@echo "ERROR: Please set DESTDIR!"; \ |
| 534 |
false |
| 535 |
.endif |
| 536 |
.endif |
| 537 |
.endif |
| 538 |
|
| 539 |
# |
| 540 |
# Check for missing UIDs/GIDs. |
| 541 |
# |
| 542 |
CHECK_UIDS= |
| 543 |
CHECK_GIDS= audit |
| 544 |
.if ${MK_SENDMAIL} != "no" |
| 545 |
CHECK_UIDS+= smmsp |
| 546 |
CHECK_GIDS+= smmsp |
| 547 |
.endif |
| 548 |
.if ${MK_PF} != "no" |
| 549 |
CHECK_UIDS+= proxy |
| 550 |
CHECK_GIDS+= proxy authpf |
| 551 |
.endif |
| 552 |
installcheck: installcheck_UGID |
| 553 |
installcheck_UGID: |
| 554 |
.for uid in ${CHECK_UIDS} |
| 555 |
@if ! `id -u ${uid} >/dev/null 2>&1`; then \ |
| 556 |
echo "ERROR: Required ${uid} user is missing, see /usr/src/UPDATING."; \ |
| 557 |
false; \ |
| 558 |
fi |
| 559 |
.endfor |
| 560 |
.for gid in ${CHECK_GIDS} |
| 561 |
@if ! `find / -prune -group ${gid} >/dev/null 2>&1`; then \ |
| 562 |
echo "ERROR: Required ${gid} group is missing, see /usr/src/UPDATING."; \ |
| 563 |
false; \ |
| 564 |
fi |
| 565 |
.endfor |
| 566 |
|
| 567 |
# |
| 568 |
# distributeworld |
| 569 |
# |
| 570 |
# Distributes everything compiled by a `buildworld'. |
| 571 |
# |
| 572 |
# installworld |
| 573 |
# |
| 574 |
# Installs everything compiled by a 'buildworld'. |
| 575 |
# |
| 576 |
distributeworld installworld: installcheck |
| 577 |
mkdir -p ${INSTALLTMP} |
| 578 |
for prog in [ awk cap_mkdb cat chflags chmod chown \ |
| 579 |
date echo egrep find grep install-info \ |
| 580 |
ln lockf make mkdir mtree mv pwd_mkdb rm sed sh sysctl \ |
| 581 |
test true uname wc zic; do \ |
| 582 |
cp `which $$prog` ${INSTALLTMP}; \ |
| 583 |
done |
| 584 |
${_+_}cd ${.CURDIR}; ${IMAKE} re${.TARGET:S/world$//} |
| 585 |
rm -rf ${INSTALLTMP} |
| 586 |
|
| 587 |
# |
| 588 |
# reinstall |
| 589 |
# |
| 590 |
# If you have a build server, you can NFS mount the source and obj directories |
| 591 |
# and do a 'make reinstall' on the *client* to install new binaries from the |
| 592 |
# most recent server build. |
| 593 |
# |
| 594 |
reinstall: |
| 595 |
@echo "--------------------------------------------------------------" |
| 596 |
@echo ">>> Making hierarchy" |
| 597 |
@echo "--------------------------------------------------------------" |
| 598 |
${_+_}cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 hierarchy |
| 599 |
@echo |
| 600 |
@echo "--------------------------------------------------------------" |
| 601 |
@echo ">>> Installing everything" |
| 602 |
@echo "--------------------------------------------------------------" |
| 603 |
${_+_}cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 install |
| 604 |
.if ${TARGET_ARCH} == "amd64" && ${MK_LIB32} != "no" |
| 605 |
${_+_}cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 install32 |
| 606 |
.endif |
| 607 |
|
| 608 |
redistribute: |
| 609 |
@echo "--------------------------------------------------------------" |
| 610 |
@echo ">>> Distributing everything" |
| 611 |
@echo "--------------------------------------------------------------" |
| 612 |
${_+_}cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 distribute |
| 613 |
.if ${TARGET_ARCH} == "amd64" && ${MK_LIB32} != "no" |
| 614 |
${_+_}cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 distribute32 DISTRIBUTION=lib32 |
| 615 |
.endif |
| 616 |
|
| 617 |
distrib-dirs distribution: |
| 618 |
cd ${.CURDIR}/etc; ${CROSSENV} PATH=${TMPPATH} ${MAKE} ${.TARGET} |
| 619 |
|
| 620 |
# |
| 621 |
# buildkernel and installkernel |
| 622 |
# |
| 623 |
# Which kernels to build and/or install is specified by setting |
| 624 |
# KERNCONF. If not defined a GENERIC kernel is built/installed. |
| 625 |
# Only the existing (depending TARGET) config files are used |
| 626 |
# for building kernels and only the first of these is designated |
| 627 |
# as the one being installed. |
| 628 |
# |
| 629 |
# Note that we have to use TARGET instead of TARGET_ARCH when |
| 630 |
# we're in kernel-land. Since only TARGET_ARCH is (expected) to |
| 631 |
# be set to cross-build, we have to make sure TARGET is set |
| 632 |
# properly. |
| 633 |
|
| 634 |
.if !defined(KERNCONF) && defined(KERNEL) |
| 635 |
KERNCONF= ${KERNEL} |
| 636 |
KERNWARN= |
| 637 |
.else |
| 638 |
KERNCONF?= GENERIC |
| 639 |
.endif |
| 640 |
INSTKERNNAME?= kernel |
| 641 |
|
| 642 |
KERNSRCDIR?= ${.CURDIR}/sys |
| 643 |
KRNLCONFDIR= ${KERNSRCDIR}/${TARGET}/conf |
| 644 |
KRNLOBJDIR= ${OBJTREE}${KERNSRCDIR} |
| 645 |
KERNCONFDIR?= ${KRNLCONFDIR} |
| 646 |
|
| 647 |
BUILDKERNELS= |
| 648 |
INSTALLKERNEL= |
| 649 |
.for _kernel in ${KERNCONF} |
| 650 |
.if exists(${KERNCONFDIR}/${_kernel}) |
| 651 |
BUILDKERNELS+= ${_kernel} |
| 652 |
.if empty(INSTALLKERNEL) |
| 653 |
INSTALLKERNEL= ${_kernel} |
| 654 |
.endif |
| 655 |
.endif |
| 656 |
.endfor |
| 657 |
|
| 658 |
# |
| 659 |
# buildkernel |
| 660 |
# |
| 661 |
# Builds all kernels defined by BUILDKERNELS. |
| 662 |
# |
| 663 |
buildkernel: |
| 664 |
.if empty(BUILDKERNELS) |
| 665 |
@echo "ERROR: Missing kernel configuration file(s) (${KERNCONF})."; \ |
| 666 |
false |
| 667 |
.endif |
| 668 |
.if defined(KERNWARN) |
| 669 |
@echo "--------------------------------------------------------------" |
| 670 |
@echo ">>> WARNING: KERNEL= setting should be changed to KERNCONF=" |
| 671 |
@echo "--------------------------------------------------------------" |
| 672 |
@sleep 3 |
| 673 |
.endif |
| 674 |
@echo |
| 675 |
.for _kernel in ${BUILDKERNELS} |
| 676 |
@echo "--------------------------------------------------------------" |
| 677 |
@echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`" |
| 678 |
@echo "--------------------------------------------------------------" |
| 679 |
@echo "===> ${_kernel}" |
| 680 |
mkdir -p ${KRNLOBJDIR} |
| 681 |
.if !defined(NO_KERNELCONFIG) |
| 682 |
@echo |
| 683 |
@echo "--------------------------------------------------------------" |
| 684 |
@echo ">>> stage 1: configuring the kernel" |
| 685 |
@echo "--------------------------------------------------------------" |
| 686 |
cd ${KRNLCONFDIR}; \ |
| 687 |
PATH=${TMPPATH} \ |
| 688 |
config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \ |
| 689 |
${KERNCONFDIR}/${_kernel} |
| 690 |
.endif |
| 691 |
.if !defined(NO_CLEAN) && !defined(NO_KERNELCLEAN) |
| 692 |
@echo |
| 693 |
@echo "--------------------------------------------------------------" |
| 694 |
@echo ">>> stage 2.1: cleaning up the object tree" |
| 695 |
@echo "--------------------------------------------------------------" |
| 696 |
cd ${KRNLOBJDIR}/${_kernel}; ${KMAKE} ${CLEANDIR} |
| 697 |
.endif |
| 698 |
@echo |
| 699 |
@echo "--------------------------------------------------------------" |
| 700 |
@echo ">>> stage 2.2: rebuilding the object tree" |
| 701 |
@echo "--------------------------------------------------------------" |
| 702 |
cd ${KRNLOBJDIR}/${_kernel}; ${KMAKE} obj |
| 703 |
@echo |
| 704 |
@echo "--------------------------------------------------------------" |
| 705 |
@echo ">>> stage 2.3: build tools" |
| 706 |
@echo "--------------------------------------------------------------" |
| 707 |
cd ${KRNLOBJDIR}/${_kernel}; \ |
| 708 |
MAKESRCPATH=${KERNSRCDIR}/dev/aic7xxx/aicasm \ |
| 709 |
${MAKE} -DNO_CPU_CFLAGS -f ${KERNSRCDIR}/dev/aic7xxx/aicasm/Makefile |
| 710 |
# XXX - Gratuitously builds aicasm in the ``makeoptions NO_MODULES'' case. |
| 711 |
.if !defined(MODULES_WITH_WORLD) && !defined(NO_MODULES) && exists(${KERNSRCDIR}/modules) |
| 712 |
.for target in obj depend all |
| 713 |
cd ${KERNSRCDIR}/modules/aic7xxx/aicasm; \ |
| 714 |
MAKEOBJDIRPREFIX=${KRNLOBJDIR}/${_kernel}/modules \ |
| 715 |
${MAKE} -DNO_CPU_CFLAGS ${target} |
| 716 |
.endfor |
| 717 |
.endif |
| 718 |
.if !defined(NO_KERNELDEPEND) |
| 719 |
@echo |
| 720 |
@echo "--------------------------------------------------------------" |
| 721 |
@echo ">>> stage 3.1: making dependencies" |
| 722 |
@echo "--------------------------------------------------------------" |
| 723 |
cd ${KRNLOBJDIR}/${_kernel}; ${KMAKE} depend -DNO_MODULES_OBJ |
| 724 |
.endif |
| 725 |
@echo |
| 726 |
@echo "--------------------------------------------------------------" |
| 727 |
@echo ">>> stage 3.2: building everything" |
| 728 |
@echo "--------------------------------------------------------------" |
| 729 |
cd ${KRNLOBJDIR}/${_kernel}; ${KMAKE} all -DNO_MODULES_OBJ |
| 730 |
@echo "--------------------------------------------------------------" |
| 731 |
@echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`" |
| 732 |
@echo "--------------------------------------------------------------" |
| 733 |
.endfor |
| 734 |
|
| 735 |
# |
| 736 |
# installkernel, etc. |
| 737 |
# |
| 738 |
# Install the kernel defined by INSTALLKERNEL |
| 739 |
# |
| 740 |
installkernel installkernel.debug \ |
| 741 |
reinstallkernel reinstallkernel.debug: installcheck |
| 742 |
.if empty(INSTALLKERNEL) |
| 743 |
@echo "ERROR: No kernel \"${KERNCONF}\" to install."; \ |
| 744 |
false |
| 745 |
.endif |
| 746 |
@echo "--------------------------------------------------------------" |
| 747 |
@echo ">>> Installing kernel" |
| 748 |
@echo "--------------------------------------------------------------" |
| 749 |
cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \ |
| 750 |
${CROSSENV} PATH=${TMPPATH} \ |
| 751 |
${MAKE} KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel//} |
| 752 |
|
| 753 |
# |
| 754 |
# doxygen |
| 755 |
# |
| 756 |
# Build the API documentation with doxygen |
| 757 |
# |
| 758 |
doxygen: |
| 759 |
@if [ ! -x `/usr/bin/which doxygen` ]; then \ |
| 760 |
echo "You need doxygen (devel/doxygen) to generate the API documentation of the kernel." | /usr/bin/fmt; \ |
| 761 |
exit 1; \ |
| 762 |
fi |
| 763 |
cd ${.CURDIR}/tools/kerneldoc/subsys && ${MAKE} obj all |
| 764 |
|
| 765 |
# |
| 766 |
# update |
| 767 |
# |
| 768 |
# Update the source tree, by running cvsup and/or running cvs to update to the |
| 769 |
# latest copy. |
| 770 |
# |
| 771 |
update: |
| 772 |
.if defined(SUP_UPDATE) |
| 773 |
@echo "--------------------------------------------------------------" |
| 774 |
@echo ">>> Running ${SUP}" |
| 775 |
@echo "--------------------------------------------------------------" |
| 776 |
.if defined(SUPFILE) |
| 777 |
@${SUP} ${SUPFLAGS} ${SUPFILE} |
| 778 |
.endif |
| 779 |
.if defined(SUPFILE1) |
| 780 |
@${SUP} ${SUPFLAGS} ${SUPFILE1} |
| 781 |
.endif |
| 782 |
.if defined(SUPFILE2) |
| 783 |
@${SUP} ${SUPFLAGS} ${SUPFILE2} |
| 784 |
.endif |
| 785 |
.if defined(PORTSSUPFILE) && !defined(NO_PORTSUPDATE) |
| 786 |
@${SUP} ${SUPFLAGS} ${PORTSSUPFILE} |
| 787 |
.endif |
| 788 |
.if defined(DOCSUPFILE) && !defined(NO_DOCUPDATE) |
| 789 |
@${SUP} ${SUPFLAGS} ${DOCSUPFILE} |
| 790 |
.endif |
| 791 |
.endif |
| 792 |
.if defined(CVS_UPDATE) |
| 793 |
@echo "--------------------------------------------------------------" |
| 794 |
@echo ">>> Updating ${.CURDIR} from CVS repository" ${CVSROOT} |
| 795 |
@echo "--------------------------------------------------------------" |
| 796 |
cd ${.CURDIR}; ${CVS} -R -q update ${CVSFLAGS} |
| 797 |
.endif |
| 798 |
|
| 799 |
# |
| 800 |
# ------------------------------------------------------------------------ |
| 801 |
# |
| 802 |
# From here onwards are utility targets used by the 'make world' and |
| 803 |
# related targets. If your 'world' breaks, you may like to try to fix |
| 804 |
# the problem and manually run the following targets to attempt to |
| 805 |
# complete the build. Beware, this is *not* guaranteed to work, you |
| 806 |
# need to have a pretty good grip on the current state of the system |
| 807 |
# to attempt to manually finish it. If in doubt, 'make world' again. |
| 808 |
# |
| 809 |
|
| 810 |
# |
| 811 |
# legacy: Build compatibility shims for the next three targets |
| 812 |
# |
| 813 |
legacy: |
| 814 |
.if ${BOOTSTRAPPING} < 503000 |
| 815 |
@echo "ERROR: Source upgrades from versions prior to 5.3 not supported."; \ |
| 816 |
false |
| 817 |
.endif |
| 818 |
.for _tool in tools/build |
| 819 |
${_+_}@${ECHODIR} "===> ${_tool} (obj,includes,depend,all,install)"; \ |
| 820 |
cd ${.CURDIR}/${_tool}; \ |
| 821 |
${MAKE} DIRPRFX=${_tool}/ obj; \ |
| 822 |
${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX}/legacy includes; \ |
| 823 |
${MAKE} DIRPRFX=${_tool}/ depend; \ |
| 824 |
${MAKE} DIRPRFX=${_tool}/ all; \ |
| 825 |
${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX}/legacy install |
| 826 |
.endfor |
| 827 |
|
| 828 |
# |
| 829 |
# bootstrap-tools: Build tools needed for compatibility |
| 830 |
# |
| 831 |
.if ${MK_GAMES} != "no" |
| 832 |
_strfile= games/fortune/strfile |
| 833 |
.endif |
| 834 |
|
| 835 |
.if ${MK_CXX} != "no" |
| 836 |
_gperf= gnu/usr.bin/gperf |
| 837 |
.if ${BOOTSTRAPPING} < 700004 |
| 838 |
_groff= gnu/usr.bin/groff |
| 839 |
.else |
| 840 |
_groff= gnu/usr.bin/groff/tmac |
| 841 |
.endif |
| 842 |
.endif |
| 843 |
|
| 844 |
.if ${BOOTSTRAPPING} < 600029 |
| 845 |
_texinfo= gnu/usr.bin/texinfo |
| 846 |
.endif |
| 847 |
|
| 848 |
.if ${BOOTSTRAPPING} < 600015 |
| 849 |
_cap_mkdb= usr.bin/cap_mkdb |
| 850 |
.endif |
| 851 |
|
| 852 |
.if ${BOOTSTRAPPING} < 600018 |
| 853 |
_colldef= usr.bin/colldef |
| 854 |
.endif |
| 855 |
|
| 856 |
.if ${BOOTSTRAPPING} < 600017 |
| 857 |
_gencat= usr.bin/gencat |
| 858 |
.endif |
| 859 |
|
| 860 |
.if ${BOOTSTRAPPING} < 600016 |
| 861 |
_mklocale= usr.bin/mklocale |
| 862 |
.endif |
| 863 |
|
| 864 |
.if ${BOOTSTRAPPING} < 700018 |
| 865 |
_gensnmptree= usr.sbin/bsnmpd/gensnmptree |
| 866 |
.endif |
| 867 |
|
| 868 |
.if ${MK_RESCUE} != "no" && \ |
| 869 |
${BOOTSTRAPPING} < 700026 |
| 870 |
_crunchgen= usr.sbin/crunch/crunchgen |
| 871 |
.endif |
| 872 |
|
| 873 |
.if ${BOOTSTRAPPING} < 600020 |
| 874 |
_pwd_mkdb= usr.sbin/pwd_mkdb |
| 875 |
.endif |
| 876 |
|
| 877 |
bootstrap-tools: |
| 878 |
.for _tool in \ |
| 879 |
${_strfile} \ |
| 880 |
${_gperf} \ |
| 881 |
${_groff} \ |
| 882 |
${_texinfo} \ |
| 883 |
${_cap_mkdb} \ |
| 884 |
${_colldef} \ |
| 885 |
${_gencat} \ |
| 886 |
usr.bin/lorder \ |
| 887 |
usr.bin/makewhatis \ |
| 888 |
${_mklocale} \ |
| 889 |
usr.bin/rpcgen \ |
| 890 |
usr.bin/xinstall \ |
| 891 |
${_gensnmptree} \ |
| 892 |
usr.sbin/config \ |
| 893 |
${_crunchgen} \ |
| 894 |
${_pwd_mkdb} |
| 895 |
${_+_}@${ECHODIR} "===> ${_tool} (obj,depend,all,install)"; \ |
| 896 |
cd ${.CURDIR}/${_tool}; \ |
| 897 |
${MAKE} DIRPRFX=${_tool}/ obj; \ |
| 898 |
${MAKE} DIRPRFX=${_tool}/ depend; \ |
| 899 |
${MAKE} DIRPRFX=${_tool}/ all; \ |
| 900 |
${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX}/legacy install |
| 901 |
.endfor |
| 902 |
|
| 903 |
# |
| 904 |
# build-tools: Build special purpose build tools |
| 905 |
# |
| 906 |
.if defined(MODULES_WITH_WORLD) && exists(${KERNSRCDIR}/modules) |
| 907 |
_aicasm= sys/modules/aic7xxx/aicasm |
| 908 |
.endif |
| 909 |
|
| 910 |
.if !defined(NO_SHARE) |
| 911 |
_share= share/syscons/scrnmaps |
| 912 |
.endif |
| 913 |
|
| 914 |
.if ${MK_KERBEROS} != "no" |
| 915 |
_kerberos5_tools= kerberos5/tools |
| 916 |
.endif |
| 917 |
|
| 918 |
.if ${MK_RESCUE} != "no" |
| 919 |
_rescue= rescue/rescue |
| 920 |
.endif |
| 921 |
|
| 922 |
build-tools: |
| 923 |
.for _tool in \ |
| 924 |
bin/csh \ |
| 925 |
bin/sh \ |
| 926 |
${_rescue} \ |
| 927 |
lib/ncurses/ncurses \ |
| 928 |
lib/ncurses/ncursesw \ |
| 929 |
${_share} \ |
| 930 |
${_aicasm} \ |
| 931 |
usr.bin/awk \ |
| 932 |
lib/libmagic \ |
| 933 |
usr.sbin/sysinstall |
| 934 |
${_+_}@${ECHODIR} "===> ${_tool} (obj,build-tools)"; \ |
| 935 |
cd ${.CURDIR}/${_tool}; \ |
| 936 |
${MAKE} DIRPRFX=${_tool}/ obj; \ |
| 937 |
${MAKE} DIRPRFX=${_tool}/ build-tools |
| 938 |
.endfor |
| 939 |
.for _tool in \ |
| 940 |
gnu/usr.bin/cc/cc_tools \ |
| 941 |
${_kerberos5_tools} |
| 942 |
${_+_}@${ECHODIR} "===> ${_tool} (obj,depend,all)"; \ |
| 943 |
cd ${.CURDIR}/${_tool}; \ |
| 944 |
${MAKE} DIRPRFX=${_tool}/ obj; \ |
| 945 |
${MAKE} DIRPRFX=${_tool}/ depend; \ |
| 946 |
${MAKE} DIRPRFX=${_tool}/ all |
| 947 |
.endfor |
| 948 |
|
| 949 |
# |
| 950 |
# cross-tools: Build cross-building tools |
| 951 |
# |
| 952 |
.if ${TARGET_ARCH} != ${MACHINE_ARCH} |
| 953 |
.if ${TARGET_ARCH} == "amd64" || ${TARGET_ARCH} == "i386" |
| 954 |
_btxld= usr.sbin/btxld |
| 955 |
.endif |
| 956 |
.if ${MK_RESCUE} != "no" || defined(RELEASEDIR) |
| 957 |
_crunchide= usr.sbin/crunch/crunchide |
| 958 |
.endif |
| 959 |
.if ${TARGET_ARCH} == "i386" && defined(RELEASEDIR) |
| 960 |
_kgzip= usr.sbin/kgzip |
| 961 |
.endif |
| 962 |
.endif |
| 963 |
|
| 964 |
cross-tools: |
| 965 |
.for _tool in \ |
| 966 |
gnu/usr.bin/binutils \ |
| 967 |
gnu/usr.bin/cc \ |
| 968 |
usr.bin/sed \ |
| 969 |
usr.bin/xlint/lint1 usr.bin/xlint/lint2 usr.bin/xlint/xlint \ |
| 970 |
${_btxld} \ |
| 971 |
${_crunchide} \ |
| 972 |
${_kgzip} |
| 973 |
${_+_}@${ECHODIR} "===> ${_tool} (obj,depend,all,install)"; \ |
| 974 |
cd ${.CURDIR}/${_tool}; \ |
| 975 |
${MAKE} DIRPRFX=${_tool}/ obj; \ |
| 976 |
${MAKE} DIRPRFX=${_tool}/ depend; \ |
| 977 |
${MAKE} DIRPRFX=${_tool}/ all; \ |
| 978 |
${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX} install |
| 979 |
.endfor |
| 980 |
|
| 981 |
# |
| 982 |
# hierarchy - ensure that all the needed directories are present |
| 983 |
# |
| 984 |
hierarchy: |
| 985 |
cd ${.CURDIR}/etc; ${MAKE} distrib-dirs |
| 986 |
|
| 987 |
# |
| 988 |
# libraries - build all libraries, and install them under ${DESTDIR}. |
| 989 |
# |
| 990 |
# The list of libraries with dependents (${_prebuild_libs}) and their |
| 991 |
# interdependencies (__L) are built automatically by the |
| 992 |
# ${.CURDIR}/tools/make_libdeps.sh script. |
| 993 |
# |
| 994 |
libraries: |
| 995 |
cd ${.CURDIR}; \ |
| 996 |
${MAKE} -f Makefile.inc1 _prereq_libs; \ |
| 997 |
${MAKE} -f Makefile.inc1 _startup_libs; \ |
| 998 |
${MAKE} -f Makefile.inc1 _prebuild_libs; \ |
| 999 |
${MAKE} -f Makefile.inc1 _generic_libs; |
| 1000 |
|
| 1001 |
# |
| 1002 |
# static libgcc.a prerequisite for shared libc |
| 1003 |
# |
| 1004 |
_prereq_libs= gnu/lib/libgcc |
| 1005 |
|
| 1006 |
# These dependencies are not automatically generated: |
| 1007 |
# |
| 1008 |
# gnu/lib/csu, gnu/lib/libgcc, lib/csu and lib/libc must be built before |
| 1009 |
# all shared libraries for ELF. |
| 1010 |
# |
| 1011 |
_startup_libs= gnu/lib/csu |
| 1012 |
.if exists(${.CURDIR}/lib/csu/${MACHINE_ARCH}-elf) |
| 1013 |
_startup_libs+= lib/csu/${MACHINE_ARCH}-elf |
| 1014 |
.else |
| 1015 |
_startup_libs+= lib/csu/${MACHINE_ARCH} |
| 1016 |
.endif |
| 1017 |
_startup_libs+= gnu/lib/libgcc |
| 1018 |
_startup_libs+= lib/libc |
| 1019 |
|
| 1020 |
gnu/lib/libgcc__L: lib/libc__L |
| 1021 |
|
| 1022 |
_prebuild_libs= ${_kerberos5_lib_libasn1} ${_kerberos5_lib_libkrb5} \ |
| 1023 |
${_kerberos5_lib_libroken} \ |
| 1024 |
lib/libbz2 lib/libcom_err lib/libcrypt lib/libexpat \ |
| 1025 |
${_lib_libgssapi} ${_lib_libipx} \ |
| 1026 |
lib/libkiconv lib/libkvm lib/libmd \ |
| 1027 |
lib/ncurses/ncurses lib/ncurses/ncursesw \ |
| 1028 |
lib/libopie lib/libpam ${_default_thread_lib} \ |
| 1029 |
lib/libradius lib/libsbuf lib/libtacplus lib/libutil \ |
| 1030 |
${_lib_libypclnt} lib/libz lib/msun \ |
| 1031 |
${_secure_lib_libcrypto} ${_secure_lib_libssh} \ |
| 1032 |
${_secure_lib_libssl} |
| 1033 |
|
| 1034 |
.if ${MK_LIBTHR} != "no" && ${MK_LIBKSE} != "no" |
| 1035 |
_default_thread_lib= lib/${DEFAULT_THREAD_LIB} |
| 1036 |
.elif ${MK_LIBTHR} != "no" |
| 1037 |
_default_thread_lib= lib/libthr |
| 1038 |
.elif ${MK_LIBKSE} != "no" |
| 1039 |
_default_thread_lib= lib/libkse |
| 1040 |
.endif |
| 1041 |
|
| 1042 |
_generic_libs= ${_cddl_lib} gnu/lib ${_kerberos5_lib} lib ${_secure_lib} usr.bin/lex/lib |
| 1043 |
|
| 1044 |
lib/libopie__L lib/libtacplus__L: lib/libmd__L |
| 1045 |
|
| 1046 |
.if ${MK_CDDL} != "no" |
| 1047 |
_cddl_lib= cddl/lib |
| 1048 |
.endif |
| 1049 |
|
| 1050 |
.if ${MK_CRYPT} != "no" |
| 1051 |
.if ${MK_OPENSSL} != "no" |
| 1052 |
_secure_lib_libcrypto= secure/lib/libcrypto |
| 1053 |
_secure_lib_libssl= secure/lib/libssl |
| 1054 |
lib/libradius__L secure/lib/libssl__L: secure/lib/libcrypto__L |
| 1055 |
.if ${MK_OPENSSH} != "no" |
| 1056 |
_secure_lib_libssh= secure/lib/libssh |
| 1057 |
secure/lib/libssh__L: lib/libz__L secure/lib/libcrypto__L lib/libcrypt__L |
| 1058 |
.if ${MK_KERBEROS} != "no" |
| 1059 |
secure/lib/libssh__L: lib/libgssapi__L kerberos5/lib/libkrb5__L \ |
| 1060 |
kerberos5/lib/libasn1__L lib/libcom_err__L lib/libmd__L \ |
| 1061 |
kerberos5/lib/libroken__L |
| 1062 |
.endif |
| 1063 |
.endif |
| 1064 |
.endif |
| 1065 |
_secure_lib= secure/lib |
| 1066 |
.endif |
| 1067 |
|
| 1068 |
.if ${MK_IPX} != "no" |
| 1069 |
_lib_libipx= lib/libipx |
| 1070 |
.endif |
| 1071 |
|
| 1072 |
.if ${MK_KERBEROS} != "no" |
| 1073 |
_kerberos5_lib= kerberos5/lib |
| 1074 |
_kerberos5_lib_libasn1= kerberos5/lib/libasn1 |
| 1075 |
_kerberos5_lib_libkrb5= kerberos5/lib/libkrb5 |
| 1076 |
_kerberos5_lib_libroken= kerberos5/lib/libroken |
| 1077 |
_lib_libgssapi= lib/libgssapi |
| 1078 |
.endif |
| 1079 |
|
| 1080 |
.if ${MK_NIS} != "no" |
| 1081 |
_lib_libypclnt= lib/libypclnt |
| 1082 |
.endif |
| 1083 |
|
| 1084 |
.if ${MK_OPENSSL} == "no" |
| 1085 |
lib/libradius__L: lib/libmd__L |
| 1086 |
.endif |
| 1087 |
|
| 1088 |
.for _lib in ${_prereq_libs} |
| 1089 |
${_lib}__PL: .PHONY |
| 1090 |
.if exists(${.CURDIR}/${_lib}) |
| 1091 |
${_+_}@${ECHODIR} "===> ${_lib} (obj,depend,all,install)"; \ |
| 1092 |
cd ${.CURDIR}/${_lib}; \ |
| 1093 |
${MAKE} DIRPRFX=${_lib}/ obj; \ |
| 1094 |
${MAKE} DIRPRFX=${_lib}/ depend; \ |
| 1095 |
${MAKE} -DWITHOUT_PROFILE -DNO_PIC DIRPRFX=${_lib}/ all; \ |
| 1096 |
${MAKE} -DWITHOUT_PROFILE -DNO_PIC DIRPRFX=${_lib}/ install |
| 1097 |
.endif |
| 1098 |
.endfor |
| 1099 |
|
| 1100 |
.for _lib in ${_startup_libs} ${_prebuild_libs:Nlib/libpam} ${_generic_libs} |
| 1101 |
${_lib}__L: .PHONY |
| 1102 |
.if exists(${.CURDIR}/${_lib}) |
| 1103 |
${_+_}@${ECHODIR} "===> ${_lib} (obj,depend,all,install)"; \ |
| 1104 |
cd ${.CURDIR}/${_lib}; \ |
| 1105 |
${MAKE} DIRPRFX=${_lib}/ obj; \ |
| 1106 |
${MAKE} DIRPRFX=${_lib}/ depend; \ |
| 1107 |
${MAKE} DIRPRFX=${_lib}/ all; \ |
| 1108 |
${MAKE} DIRPRFX=${_lib}/ install |
| 1109 |
.endif |
| 1110 |
.endfor |
| 1111 |
|
| 1112 |
# libpam is special: we need to build static PAM modules before |
| 1113 |
# static PAM library, and dynamic PAM library before dynamic PAM |
| 1114 |
# modules. |
| 1115 |
lib/libpam__L: .PHONY |
| 1116 |
${_+_}@${ECHODIR} "===> lib/libpam (obj,depend,all,install)"; \ |
| 1117 |
cd ${.CURDIR}/lib/libpam; \ |
| 1118 |
${MAKE} DIRPRFX=lib/libpam/ obj; \ |
| 1119 |
${MAKE} DIRPRFX=lib/libpam/ depend; \ |
| 1120 |
${MAKE} DIRPRFX=lib/libpam/ -D_NO_LIBPAM_SO_YET all; \ |
| 1121 |
${MAKE} DIRPRFX=lib/libpam/ -D_NO_LIBPAM_SO_YET install |
| 1122 |
|
| 1123 |
_prereq_libs: ${_prereq_libs:S/$/__PL/} |
| 1124 |
_startup_libs: ${_startup_libs:S/$/__L/} |
| 1125 |
_prebuild_libs: ${_prebuild_libs:S/$/__L/} |
| 1126 |
_generic_libs: ${_generic_libs:S/$/__L/} |
| 1127 |
|
| 1128 |
.for __target in all clean cleandepend cleandir depend includes obj |
| 1129 |
.for entry in ${SUBDIR} |
| 1130 |
${entry}.${__target}__D: .PHONY |
| 1131 |
${_+_}@if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \ |
| 1132 |
${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH} (${__target})"; \ |
| 1133 |
edir=${entry}.${MACHINE_ARCH}; \ |
| 1134 |
cd ${.CURDIR}/$${edir}; \ |
| 1135 |
else \ |
| 1136 |
${ECHODIR} "===> ${DIRPRFX}${entry} (${__target})"; \ |
| 1137 |
edir=${entry}; \ |
| 1138 |
cd ${.CURDIR}/$${edir}; \ |
| 1139 |
fi; \ |
| 1140 |
${MAKE} ${__target} DIRPRFX=${DIRPRFX}$${edir}/ |
| 1141 |
.endfor |
| 1142 |
par-${__target}: ${SUBDIR:S/$/.${__target}__D/} |
| 1143 |
.endfor |
| 1144 |
|
| 1145 |
.include <bsd.subdir.mk> |
| 1146 |
|
| 1147 |
.if make(check-old) || make(check-old-dirs) || \ |
| 1148 |
make(check-old-files) || make(check-old-libs) || \ |
| 1149 |
make(delete-old) || make(delete-old-dirs) || \ |
| 1150 |
make(delete-old-files) || make(delete-old-libs) |
| 1151 |
|
| 1152 |
# |
| 1153 |
# check for / delete old files section |
| 1154 |
# |
| 1155 |
|
| 1156 |
.include "ObsoleteFiles.inc" |
| 1157 |
|
| 1158 |
OLD_LIBS_MESSAGE="Please be sure no application still uses those libraries, \ |
| 1159 |
else you can not start such an application. Consult UPDATING for more \ |
| 1160 |
information regarding how to cope with the removal/revision bump of a \ |
| 1161 |
specific library." |
| 1162 |
|
| 1163 |
.if !defined(BATCH_DELETE_OLD_FILES) |
| 1164 |
RM_I=-i |
| 1165 |
.else |
| 1166 |
RM_I=-v |
| 1167 |
.endif |
| 1168 |
|
| 1169 |
delete-old-files: |
| 1170 |
@echo ">>> Removing old files (only deletes safe to delete libs)" |
| 1171 |
# Ask for every old file if the user really wants to remove it. |
| 1172 |
# It's annoying, but better safe than sorry. |
| 1173 |
@for file in ${OLD_FILES}; do \ |
| 1174 |
if [ -f "${DESTDIR}/$${file}" -o -L "${DESTDIR}/$${file}" ]; then \ |
| 1175 |
chflags noschg "${DESTDIR}/$${file}" 2>/dev/null || true; \ |
| 1176 |
rm ${RM_I} "${DESTDIR}/$${file}"; \ |
| 1177 |
fi; \ |
| 1178 |
done |
| 1179 |
# Remove catpages without corresponding manpages. |
| 1180 |
@3<&0; \ |
| 1181 |
find ${DESTDIR}/usr/share/man/cat* ! -type d | \ |
| 1182 |
sed -ep -e's:${DESTDIR}/usr/share/man/cat:${DESTDIR}/usr/share/man/man:' | \ |
| 1183 |
while read catpage; do \ |
| 1184 |
read manpage; \ |
| 1185 |
if [ ! -e "$${manpage}" ]; then \ |
| 1186 |
rm ${RM_I} $${catpage} <&3 ; \ |
| 1187 |
fi; \ |
| 1188 |
done |
| 1189 |
@echo ">>> Old files removed" |
| 1190 |
|
| 1191 |
check-old-files: |
| 1192 |
@echo ">>> Checking for old files" |
| 1193 |
@for file in ${OLD_FILES}; do \ |
| 1194 |
if [ -f "${DESTDIR}/$${file}" -o -L "${DESTDIR}/$${file}" ]; then \ |
| 1195 |
echo "${DESTDIR}/$${file}"; \ |
| 1196 |
fi; \ |
| 1197 |
done |
| 1198 |
# Check for catpages without corresponding manpages. |
| 1199 |
@find ${DESTDIR}/usr/share/man/cat* ! -type d | \ |
| 1200 |
sed -ep -e's:${DESTDIR}/usr/share/man/cat:${DESTDIR}/usr/share/man/man:' | \ |
| 1201 |
while read catpage; do \ |
| 1202 |
read manpage; \ |
| 1203 |
if [ ! -e "$${manpage}" ]; then \ |
| 1204 |
echo $${catpage} ; \ |
| 1205 |
fi; \ |
| 1206 |
done |
| 1207 |
|
| 1208 |
delete-old-libs: |
| 1209 |
@echo ">>> Removing old libraries" |
| 1210 |
@echo "${OLD_LIBS_MESSAGE}" | fmt |
| 1211 |
@for file in ${OLD_LIBS}; do \ |
| 1212 |
if [ -f "${DESTDIR}/$${file}" -o -L "${DESTDIR}/$${file}" ]; then \ |
| 1213 |
chflags noschg "${DESTDIR}/$${file}" 2>/dev/null || true; \ |
| 1214 |
rm ${RM_I} "${DESTDIR}/$${file}"; \ |
| 1215 |
fi; \ |
| 1216 |
done |
| 1217 |
@echo ">>> Old libraries removed" |
| 1218 |
|
| 1219 |
check-old-libs: |
| 1220 |
@echo ">>> Checking for old libraries" |
| 1221 |
@for file in ${OLD_LIBS}; do \ |
| 1222 |
if [ -f "${DESTDIR}/$${file}" -o -L "${DESTDIR}/$${file}" ]; then \ |
| 1223 |
echo "${DESTDIR}/$${file}"; \ |
| 1224 |
fi; \ |
| 1225 |
done |
| 1226 |
|
| 1227 |
delete-old-dirs: |
| 1228 |
@echo ">>> Removing old directories" |
| 1229 |
@for dir in ${OLD_DIRS}; do \ |
| 1230 |
if [ -d "${DESTDIR}/$${dir}" ]; then \ |
| 1231 |
rmdir -v "${DESTDIR}/$${dir}" || true; \ |
| 1232 |
elif [ -L "${DESTDIR}/$${dir}" ]; then \ |
| 1233 |
echo "${DESTDIR}/$${dir} is a link, please remove everything manually."; \ |
| 1234 |
fi; \ |
| 1235 |
done |
| 1236 |
@echo ">>> Old directories removed" |
| 1237 |
|
| 1238 |
check-old-dirs: |
| 1239 |
@echo ">>> Checking for old directories" |
| 1240 |
@for dir in ${OLD_DIRS}; do \ |
| 1241 |
if [ -d "${DESTDIR}/$${dir}" ]; then \ |
| 1242 |
echo "${DESTDIR}/$${dir}"; \ |
| 1243 |
elif [ -L "${DESTDIR}/$${dir}" ]; then \ |
| 1244 |
echo "${DESTDIR}/$${dir} is a link, please remove everything manually."; \ |
| 1245 |
fi; \ |
| 1246 |
done |
| 1247 |
|
| 1248 |
delete-old: delete-old-files delete-old-dirs |
| 1249 |
@echo "To remove old libraries run '${MAKE} delete-old-libs'." |
| 1250 |
|
| 1251 |
check-old: check-old-files check-old-libs check-old-dirs |
| 1252 |
@echo "To remove old files and directories run '${MAKE} delete-old'." |
| 1253 |
@echo "To remove old libraries run '${MAKE} delete-old-libs'." |
| 1254 |
|
| 1255 |
.endif |
| 1256 |
|
| 1257 |
# |
| 1258 |
# showconfig - show build configuration. |
| 1259 |
# |
| 1260 |
showconfig: |
| 1261 |
@${MAKE} -n -f bsd.own.mk -V dummy -dg1 | grep ^MK_ | sort |
