1 |
# @(#)printcap 5.3 (Berkeley) 6/30/90 |
2 |
# $FreeBSD: src/etc/printcap,v 1.14 2004/06/06 11:46:27 schweikh Exp $ |
3 |
# $MidnightBSD$ |
4 |
# |
5 |
# This enables a simple local "raw" printer, hooked up to the first |
6 |
# parallel port. No kind of filtering is done, so everything you pass |
7 |
# to the "lpr" command will be printed unmodified. |
8 |
# |
9 |
# Remember, for further print queues you're going to add, you have |
10 |
# to choose different spool directories (the "sd" capability below), |
11 |
# otherwise you will greatly confuse lpd. |
12 |
# |
13 |
# For some advanced printing, have a look at the "apsfilter" package. |
14 |
# It plugs into the lpd system, allowing you to print a variety of |
15 |
# different file types by converting everything to PostScript(tm) |
16 |
# format. For more information about apsfilter visit |
17 |
# |
18 |
# http://www.apsfilter.org/ |
19 |
# |
20 |
# If you don't have a PostScript(tm) printer, don't panic, but do |
21 |
# also install the latest "ghostscript" package for best printer support. |
22 |
# |
23 |
# Do also refer to the "printing" section of the handbook. |
24 |
# |
25 |
# http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/printing.html |
26 |
# |
27 |
# A local copy can be found under |
28 |
# |
29 |
# /usr/share/doc/handbook/handbook.{html,latin1}. |
30 |
# |
31 |
# Banner pages are now suppressed by default. Remove the :sh: capability |
32 |
# to turn them back on. |
33 |
# |
34 |
#lp|local line printer:\ |
35 |
# :sh:\ |
36 |
# :lp=/dev/lpt0:sd=/var/spool/output/lpd:lf=/var/log/lpd-errs: |
37 |
# |
38 |
# Sample remote printer. The physical printer is on machine "lphost". |
39 |
# You can perform any kind of local filtering directly. If you need |
40 |
# local filters (e.g. LF -> CR-LF conversion for HP printers), create |
41 |
# a filter script that sends the proper escape sequence to the printer |
42 |
# and then concatenates stdin to stdout. |
43 |
# |
44 |
#remote|sample remote printer:\ |
45 |
# :sh:\ |
46 |
# :rm=lphost:sd=/var/spool/output/lphost:lf=/var/log/lpd-errs:\ |
47 |
# :if=/usr/local/libexec/if-script: |
48 |
# |
49 |
# Simple Russian printer with hardware CP866 character set, output filter |
50 |
# used for KOI8-R -> CP866 conversion |
51 |
# |
52 |
#lp|Russian local line printer:\ |
53 |
# :sh:of=/usr/libexec/lpr/ru/koi2alt:\ |
54 |
# :lp=/dev/lpt0:sd=/var/spool/output/lpd:lf=/var/log/lpd-errs: |