1# $NetBSD: XLSATX,v 1.35 2025/03/19 21:03:40 jakllsch Exp $ 2 3include "arch/evbmips/conf/std.rmixl" 4 5#ident "XLSATX-$Revision: 1.35 $" 6 7#options INCLUDE_CONFIG_FILE # embed config file in kernel binary 8 9maxusers 32 10 11# 12# MEMSIZE can be used to limit memory amount used 13# 14#options MEMSIZE=0x10000000 # 256MB 15 16# 17# MEMLIMIT can be used to limit memory address used 18# 19defparam opt_memsize.h MEMLIMIT 20#options MEMLIMIT=0x10000000 # 256MB 21 22options NOFPU # No FPU 23#options FPEMUL # emulate FPU insn 24 25# Standard system options 26options KTRACE # system call tracing support 27options SYSVMSG # System V message queues 28options SYSVSEM # System V semaphores 29options SYSVSHM # System V shared memory 30#options SHMMAXPGS=1024 # 1024 pages is the default 31#options MODULAR 32options NTP # network time protocol 33 34# Debugging options 35options DIAGNOSTIC # extra kernel sanity checking 36#options DEBUG # extra kernel debugging support 37options MSGBUFSIZE=65536 # kernel dmesg buffer 38options USERCONF # userconf(4) support 39#options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel 40options DDB # kernel dynamic debugger 41options DDB_HISTORY_SIZE=100 # enable history editing in DDB 42makeoptions DEBUG="-g" # compile full symbol table 43makeoptions COPY_SYMTAB=1 # size for embedded symbol table 44#options DDB_COMMANDONENTER="trace;show registers" 45options DB_MAX_LINE=-1 46 47# Compatibility options 48 49include "conf/compat_netbsd50.config" 50 51#options EXEC_ECOFF # exec ECOFF binaries 52#options COMPAT_ULTRIX # binary compatibility with Ultrix 53 54# File systems 55file-system FFS # Berkeley Fast Filesystem 56file-system MFS # memory-based filesystem 57#file-system EXT2FS # second extended file system (linux) 58file-system NFS # Sun NFS-compatible filesystem client 59file-system KERNFS # kernel data-structure filesystem 60#file-system NULLFS # NULL layered filesystem 61#file-system OVERLAY # overlay file system 62#file-system FDESC # user file descriptor filesystem 63#file-system UMAPFS # uid/gid remapping filesystem 64#file-system LFS # Log-based filesystem (still experimental) 65#file-system PUFFS # Userspace file systems (e.g. ntfs-3g & sshfs) 66file-system PROCFS # /proc 67#file-system CD9660 # ISO 9660 + Rock Ridge file system 68file-system TMPFS # Efficient memory file system 69#file-system UNION # union file system 70#file-system MSDOSFS # MS-DOS FAT filesystem(s). 71#file-system CODA # Coda File System; also needs vcoda (below) 72file-system PTYFS # /dev/pts/N support 73 74# File system options 75#options FFS_EI # FFS Endian Independent support 76options FFS_NO_SNAPSHOT # No FFS snapshot support 77#options QUOTA # legacy UFS quotas 78options UFS_DIRHASH # UFS Large Directory Hashing 79options UFS_EXTATTR # Extended attribute support for UFS1 80options WAPBL # File system journaling support 81#options NFSSERVER # Network File System server 82 83# Alternate buffer queue strategies for better responsiveness under high 84# disk I/O load. 85#options BUFQ_READPRIO 86options BUFQ_PRIOCSCAN 87 88# Networking options 89#options GATEWAY # IP packet forwarding 90options INET # Internet protocols 91options INET6 # IPV6 92#options IPSEC # IP security 93#options IPSEC_DEBUG # debug for IP security 94#options MROUTING # packet forwarding of multicast packets 95#options PIM # Protocol Independent Multicast 96#options NETATALK # AppleTalk (over Ethernet) protocol 97#options PPP_BSDCOMP # BSD-Compress compression support for PPP 98#options PPP_DEFLATE # Deflate compression support for PPP 99#options PPP_FILTER # Active filter support for PPP (requires bpf) 100 101# JIT compiler for bpfilter 102#options SLJIT 103#options BPFJIT 104 105# These options enable verbose messages for several subsystems. 106# Warning, these may compile large string tables into the kernel! 107#options PCI_NETBSD_CONFIGURE # NetBSD configures the PCI bus 108options PCIVERBOSE # verbose PCI device autoconfig messages 109#options PCI_CONFIG_DUMP # verbosely dump PCI config space 110#options SCSIVERBOSE # human readable SCSI error messages 111options MIIVERBOSE # verbose PHY autoconfig messages 112 113# Bitmask for enabling the PCI IDE channels in the southbridge. 114# Set bit 0 (0x01) for channel 0, bit 1 (0x02) for channel 1. 115# 116# Do this if your firmware (usually PMON and YAMON) doesn't enable the IDE 117# channels for you (thus causing the NetBSD `pciide' driver to ignore them). 118options PCI_NETBSD_ENABLE_IDE=0x1 119 120options NFS_BOOT_DHCP 121 122config netbsd root on ? type ? 123config netbsd-wm0 root on wm0 type nfs 124config netbsd-msk0 root on msk0 type nfs 125config netbsd-sd0a root on sd0a type ffs 126 127 128mainbus0 at root 129cpunode* at mainbus? node ? 130cpucore* at cpunode? core ? 131cpu* at cpucore? thread ? 132obio0 at cpunode? 133com0 at obio0 addr 0x14000 intr 9 134com1 at obio0 addr 0x15000 intr 10 135options COM_REGMAP 136rmixl_gpio0 at obio0 addr 0x18000 intr 14 137gpio* at rmixl_gpio? 138rmixl_iobus0 at obio0 addr 0x19000 139rmixl_nand* at rmixl_iobus? addr 0x01800000 140#rmixl_nand* at rmixl_iobus? cs 2 141nand* at rmixl_nand? 142flash* at nand? 143#rmixl_pcic* at rmixl_iobus? cs 6 addr 0x01000000 144#pcmcia* at rmixl_pcic 145rmixl_pcix0 at obio0 146pci* at rmixl_pcix0 147rmixl_pcie0 at obio0 148pci* at rmixl_pcie0 149ppb* at pci? 150pci* at ppb? 151wm* at pci? dev ? function ? # Intel i82546EB Gig-E 152skc* at pci? dev ? function ? 153sk* at skc? 154mskc* at pci? dev ? function ? 155msk* at mskc? 156makphy* at mii? phy ? # Marvell 88E1000 PHYs 157ukphy* at mii? phy ? # unknown PHY 158rmixl_usbi0 at obio0 addr 0x25000 intr 31 159ohci0 at rmixl_usbi0 addr 0x24400 size 0x400 intr 0 160ohci1 at rmixl_usbi0 addr 0x24800 size 0x400 intr 1 161ehci0 at rmixl_usbi0 addr 0x24000 size 0x400 intr 2 162siisata* at pci? dev ? function ? 163atabus* at ata? 164wd* at atabus? drive ? flags 0x0000 165 166# USB 167usb* at ohci? 168usb* at ehci? 169uhub* at usb? 170uhub* at uhub? port ? 171umass* at uhub? port ? configuration ? interface ? 172scsibus* at umass? channel ? 173sd* at scsibus? target ? lun ? 174 175 176# Pseudo-devices 177 178# Disk/mass storage pseudo-devices 179#pseudo-device ccd # concatenated disk devices 180#pseudo-device raid # RAIDframe disk driver 181#options RAID_AUTOCONFIG # auto-configuration of RAID 182#pseudo-device fss # file system snapshot device 183pseudo-device vnd # disk-like interface to files 184 185# Network pseudo-devices 186pseudo-device bpfilter # Berkeley packet filter 187pseudo-device carp # Common Address Redundancy Protocol 188pseudo-device npf # NPF packet filter 189pseudo-device loop # network loopback 190#pseudo-device ppp # Point-to-Point Protocol 191#pseudo-device sl # Serial Line IP 192#pseudo-device tun # network tunneling over tty 193#pseudo-device tap # virtual Ethernet 194#pseudo-device gre # generic L3 over IP tunnel 195#pseudo-device ipip # RFC 2003 IP Encapsulation 196#pseudo-device gif # RFC1933 tunnel 197#pseudo-device faith # IPv[46] tcp relay translation 198#pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation 199#pseudo-device vlan # IEEE 802.1q encapsulation 200#pseudo-device bridge # simple inter-network bridging 201#pseudo-device vether # Virtual Ethernet for bridge 202pseudo-device kttcp # kernel ttcp 203 204# Miscellaneous pseudo-devices 205pseudo-device pty # pseudo-terminals 206#pseudo-device sequencer # MIDI sequencer 207pseudo-device clockctl # user control of clock subsystem 208pseudo-device ksyms # /dev/ksyms 209 210# A pseudo device needed for Coda # also needs CODA (above) 211#pseudo-device vcoda # coda minicache <-> venus comm. 212 213include "dev/veriexec.config" 214