1 /*        $NetBSD: j6x0tp.c,v 1.26 2023/12/20 14:50:02 thorpej Exp $ */
2 
3 /*
4  * Copyright (c) 2003 Valeriy E. Ushakov
5  * All rights reserved.
6  *
7  * Redistribution and use in source and binary forms, with or without
8  * modification, are permitted provided that the following conditions
9  * are met:
10  * 1. Redistributions of source code must retain the above copyright
11  *    notice, this list of conditions and the following disclaimer.
12  * 2. Redistributions in binary form must reproduce the above copyright
13  *    notice, this list of conditions and the following disclaimer in the
14  *    documentation and/or other materials provided with the distribution.
15  * 3. The name of the author may not be used to endorse or promote products
16  *    derived from this software without specific prior written permission
17  *
18  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
19  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
20  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
21  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
22  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
23  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
24  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
25  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
26  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
27  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
28  */
29 
30 #include <sys/cdefs.h>
31 __KERNEL_RCSID(0, "$NetBSD: j6x0tp.c,v 1.26 2023/12/20 14:50:02 thorpej Exp $");
32 
33 #include <sys/param.h>
34 #include <sys/kernel.h>
35 #include <sys/device.h>
36 #include <sys/systm.h>
37 #include <sys/callout.h>
38 
39 #include "opt_j6x0tp.h"
40 
41 #include <dev/wscons/wsconsio.h>
42 #include <dev/wscons/wsmousevar.h>
43 #include <dev/wscons/wskbdvar.h>
44 #include <dev/wscons/wsksymvar.h>
45 #include <dev/wscons/wsksymdef.h>
46 #include <dev/hpc/hpctpanelvar.h>
47 
48 #include <machine/platid.h>
49 #include <machine/platid_mask.h>
50 
51 #include <machine/intr.h>
52 
53 #include <sh3/exception.h>
54 #include <sh3/intcreg.h>
55 #include <sh3/pfcreg.h>
56 #include <sh3/adcreg.h>
57 
58 #include <sh3/dev/adcvar.h>
59 
60 
61 #if 0 /* XXX: disabled in favor of local version that uses printf_nolog */
62 #define DPRINTF_ENABLE
63 #define DPRINTF_DEBUG         j6x0tp_debug
64 #define DPRINTF_LEVEL         0
65 #include <machine/debug.h>
66 #else
67 #ifdef J6X0TP_DEBUG
68 volatile int j6x0tp_debug = 0;
69 #define DPRINTF_PRINTF                  printf_nolog
70 #define DPRINTF(arg)                    if (j6x0tp_debug) DPRINTF_PRINTF arg
71 #define DPRINTFN(n, arg)      if (j6x0tp_debug > (n)) DPRINTF_PRINTF arg
72 #else
73 #define DPRINTF(arg)                    ((void)0)
74 #define DPRINTFN(n, arg)      ((void)0)
75 #endif
76 #endif
77 
78 
79 /*
80  * PFC bits pertinent to Jornada 6x0 touchpanel
81  */
82 #define PHDR_TP_PEN_DOWN      0x08
83 
84 #define SCPDR_TP_SCAN_ENABLE  0x20
85 #define SCPDR_TP_SCAN_Y                 0x02
86 #define SCPDR_TP_SCAN_X                 0x01
87 
88 /*
89  * A/D converter channels to get x/y from
90  */
91 #define ADC_CHANNEL_TP_Y      1
92 #define ADC_CHANNEL_TP_X      2
93 
94 /*
95  * Default (read: my device :) raw X/Y values for framebuffer edges.
96  * XXX: defopt these?
97  */
98 #define J6X0TP_FB_LEFT                   38
99 #define J6X0TP_FB_RIGHT                 950
100 #define J6X0TP_FB_TOP                    80
101 #define J6X0TP_FB_BOTTOM      900
102 
103 /*
104  * Bottom of the n'th hard icon (n = 1..4)
105  */
106 #define J6X0TP_HARD_ICON_MAX_Y(n) \
107           (J6X0TP_FB_TOP + ((J6X0TP_FB_BOTTOM - J6X0TP_FB_TOP) / 4) * (n))
108 
109 
110 struct j6x0tp_softc {
111           device_t sc_dev;
112 
113 #define J6X0TP_WSMOUSE_ENABLED          0x01
114 #define J6X0TP_WSKBD_ENABLED  0x02
115           int sc_enabled;
116 
117           int sc_hard_icon;
118 
119           struct callout sc_touch_ch;
120 
121           device_t sc_wsmousedev;
122           device_t sc_wskbddev;
123 
124           struct tpcalib_softc sc_tpcalib; /* calibration info for wsmouse */
125 };
126 
127 
128 /* config machinery */
129 static int          j6x0tp_match(device_t, cfdata_t, void *);
130 static void         j6x0tp_attach(device_t, device_t, void *);
131 
132 /* wsmouse accessops */
133 static int          j6x0tp_wsmouse_enable(void *);
134 static int          j6x0tp_wsmouse_ioctl(void *, u_long, void *, int, lwp_t *);
135 static void         j6x0tp_wsmouse_disable(void *);
136 
137 /* wskbd accessops */
138 static int          j6x0tp_wskbd_enable(void *, int);
139 static void         j6x0tp_wskbd_set_leds(void *, int);
140 static int          j6x0tp_wskbd_ioctl(void *, u_long, void *, int, lwp_t *);
141 
142 /* internal driver routines */
143 static void         j6x0tp_enable(struct j6x0tp_softc *);
144 static void         j6x0tp_disable(struct j6x0tp_softc *);
145 static int          j6x0tp_enable_child(struct j6x0tp_softc *, int, int);
146 static int          j6x0tp_intr(void *);
147 static void         j6x0tp_start_polling(void *);
148 static void         j6x0tp_stop_polling(struct j6x0tp_softc *);
149 static void         j6x0tp_callout_wsmouse(void *);
150 static void         j6x0tp_callout_wskbd(void *);
151 static void         j6x0tp_wsmouse_input(struct j6x0tp_softc *, int, int);
152 static void         j6x0tp_get_raw_xy(int *, int *);
153 static int          j6x0tp_get_hard_icon(int, int);
154 
155 
156 static const struct wsmouse_accessops j6x0tp_accessops = {
157           j6x0tp_wsmouse_enable,
158           j6x0tp_wsmouse_ioctl,
159           j6x0tp_wsmouse_disable
160 };
161 
162 static const struct wsmouse_calibcoords j6x0tp_default_calib = {
163           0, 0, 639, 239,
164           4,
165           {{ J6X0TP_FB_LEFT,  J6X0TP_FB_TOP,      0,   0 },
166            { J6X0TP_FB_RIGHT, J6X0TP_FB_TOP,    639,   0 },
167            { J6X0TP_FB_LEFT,  J6X0TP_FB_BOTTOM,   0, 239 },
168            { J6X0TP_FB_RIGHT, J6X0TP_FB_BOTTOM, 639, 239 }}
169 };
170 
171 static const struct wskbd_accessops j6x0tp_wskbd_accessops = {
172           j6x0tp_wskbd_enable,
173           j6x0tp_wskbd_set_leds,
174           j6x0tp_wskbd_ioctl
175 };
176 
177 
178 #ifndef J6X0TP_SETTINGS_ICON_KEYSYM
179 #define J6X0TP_SETTINGS_ICON_KEYSYM     KS_Home
180 #endif
181 #ifndef J6X0TP_PGUP_ICON_KEYSYM
182 #define J6X0TP_PGUP_ICON_KEYSYM                   KS_Prior
183 #endif
184 #ifndef J6X0TP_PGDN_ICON_KEYSYM
185 #define J6X0TP_PGDN_ICON_KEYSYM                   KS_Next
186 #endif
187 #ifndef J6X0TP_SWITCH_ICON_KEYSYM
188 #define J6X0TP_SWITCH_ICON_KEYSYM       KS_End
189 #endif
190 
191 static const keysym_t j6x0tp_wskbd_keydesc[] = {
192           KS_KEYCODE(1), J6X0TP_SETTINGS_ICON_KEYSYM,
193           KS_KEYCODE(2), J6X0TP_PGUP_ICON_KEYSYM,
194           KS_KEYCODE(3), J6X0TP_PGDN_ICON_KEYSYM,
195           KS_KEYCODE(4), J6X0TP_SWITCH_ICON_KEYSYM
196 };
197 
198 static const struct wscons_keydesc j6x0tp_wskbd_keydesctab[] = {
199           { KB_US, 0,
200             sizeof(j6x0tp_wskbd_keydesc)/sizeof(keysym_t),
201             j6x0tp_wskbd_keydesc
202           },
203           {0, 0, 0, 0}
204 };
205 
206 static const struct wskbd_mapdata j6x0tp_wskbd_keymapdata = {
207         j6x0tp_wskbd_keydesctab, KB_US
208 };
209 
210 
211 CFATTACH_DECL_NEW(j6x0tp, sizeof(struct j6x0tp_softc),
212     j6x0tp_match, j6x0tp_attach, NULL, NULL);
213 
214 
215 static int
j6x0tp_match(device_t parent,cfdata_t cf,void * aux)216 j6x0tp_match(device_t parent, cfdata_t cf, void *aux)
217 {
218 
219           /*
220            * XXX: platid_mask_MACH_HP_LX also matches 360LX.  It's not
221            * confirmed whether touch panel in 360LX is connected this
222            * way.  We may need to regroup platid masks.
223            */
224           if (!platid_match(&platid, &platid_mask_MACH_HP_JORNADA_6XX)
225               && !platid_match(&platid, &platid_mask_MACH_HP_LX))
226                     return (0);
227 
228           if (strcmp(cf->cf_name, "j6x0tp") != 0)
229                     return (0);
230 
231           return (1);
232 }
233 
234 
235 static void
j6x0tp_attach(device_t parent,device_t self,void * aux)236 j6x0tp_attach(device_t parent, device_t self, void *aux)
237 {
238           struct j6x0tp_softc *sc;
239           struct wsmousedev_attach_args wsma;
240           struct wskbddev_attach_args wska;
241 
242           aprint_naive("\n");
243           aprint_normal("\n");
244 
245           sc = device_private(self);
246           sc->sc_dev = self;
247 
248           sc->sc_enabled = 0;
249           sc->sc_hard_icon = 0;
250 
251           /* touch-panel as a pointing device */
252           wsma.accessops = &j6x0tp_accessops;
253           wsma.accesscookie = sc;
254 
255           sc->sc_wsmousedev = config_found(self, &wsma, wsmousedevprint,
256               CFARGS(.iattr = "wsmousedev"));
257           if (sc->sc_wsmousedev == NULL)
258                     return;
259 
260           /* on-screen "hard icons" as a keyboard device */
261           wska.console = 0;
262           wska.keymap = &j6x0tp_wskbd_keymapdata;
263           wska.accessops = &j6x0tp_wskbd_accessops;
264           wska.accesscookie = sc;
265 
266           sc->sc_wskbddev = config_found(self, &wska, wskbddevprint,
267               CFARGS(.iattr = "wskbddev"));
268 
269           /* init calibration, set default parameters */
270           tpcalib_init(&sc->sc_tpcalib);
271           tpcalib_ioctl(&sc->sc_tpcalib, WSMOUSEIO_SCALIBCOORDS,
272                           (void *)__UNCONST(&j6x0tp_default_calib), 0, 0);
273 
274           /* used when in polling mode */
275           callout_init(&sc->sc_touch_ch, 0);
276 
277           /* establish interrupt handler, but disable until opened */
278           intc_intr_establish(SH7709_INTEVT2_IRQ3, IST_EDGE, IPL_TTY,
279                                   j6x0tp_intr, sc);
280           intc_intr_disable(SH7709_INTEVT2_IRQ3);
281 
282           if (!pmf_device_register(self, NULL, NULL))
283                     aprint_error_dev(self, "unable to establish power handler\n");
284 }
285 
286 
287 /*
288  * Enable touch panel:  we start in interrupt mode.
289  * Must be called as spltty().
290  */
291 static void
j6x0tp_enable(struct j6x0tp_softc * sc)292 j6x0tp_enable(struct j6x0tp_softc *sc)
293 {
294 
295           DPRINTFN(2, ("%s: enable\n", device_xname(sc->sc_dev)));
296           intc_intr_enable(SH7709_INTEVT2_IRQ3);
297 }
298 
299 
300 /*
301  * Disable touch panel: disable interrupt, cancel pending callout.
302  * Must be called as spltty().
303  */
304 static void
j6x0tp_disable(struct j6x0tp_softc * sc)305 j6x0tp_disable(struct j6x0tp_softc *sc)
306 {
307 
308           DPRINTFN(2, ("%s: disable\n", device_xname(sc->sc_dev)));
309           intc_intr_disable(SH7709_INTEVT2_IRQ3);
310           callout_stop(&sc->sc_touch_ch);
311 }
312 
313 
314 static int
j6x0tp_enable_child(struct j6x0tp_softc * sc,int child,int on)315 j6x0tp_enable_child(struct j6x0tp_softc *sc, int child, int on)
316 {
317           int s = spltty();
318 
319           if (on) {
320                     if (!sc->sc_enabled)
321                               j6x0tp_enable(sc);
322                     sc->sc_enabled |= child;
323           } else {
324                     sc->sc_enabled &= ~child;
325                     if (!sc->sc_enabled)
326                               j6x0tp_disable(sc);
327           }
328 
329           splx(s);
330           return (0);
331 }
332 
333 
334 static int
j6x0tp_wsmouse_enable(void * arg)335 j6x0tp_wsmouse_enable(void *arg)
336 {
337           struct j6x0tp_softc *sc = arg;
338 
339           DPRINTFN(1, ("%s: wsmouse enable\n", device_xname(sc->sc_dev)));
340           return (j6x0tp_enable_child(sc, J6X0TP_WSMOUSE_ENABLED, 1));
341 }
342 
343 
344 static void
j6x0tp_wsmouse_disable(void * arg)345 j6x0tp_wsmouse_disable(void *arg)
346 {
347           struct j6x0tp_softc *sc = arg;
348 
349           DPRINTFN(1, ("%s: wsmouse disable\n", device_xname(sc->sc_dev)));
350           j6x0tp_enable_child(sc, J6X0TP_WSMOUSE_ENABLED, 0);
351 }
352 
353 
354 static int
j6x0tp_wskbd_enable(void * arg,int on)355 j6x0tp_wskbd_enable(void *arg, int on)
356 {
357           struct j6x0tp_softc *sc = arg;
358 
359           DPRINTFN(1, ("%s: wskbd %sable\n", device_xname(sc->sc_dev),
360                          on ? "en" : "dis"));
361           return (j6x0tp_enable_child(sc, J6X0TP_WSKBD_ENABLED, on));
362 }
363 
364 
365 static int
j6x0tp_intr(void * arg)366 j6x0tp_intr(void *arg)
367 {
368           struct j6x0tp_softc *sc = arg;
369 
370           uint8_t irr0;
371           uint8_t phdr, touched;
372           unsigned int steady, tremor_timeout;
373 
374           irr0 = _reg_read_1(SH7709_IRR0);
375           if ((irr0 & IRR0_IRQ3) == 0) {
376 #ifdef DIAGNOSTIC
377                     printf("%s: irr0 %02x?\n", device_xname(sc->sc_dev), irr0);
378 #endif
379                     return (0);
380           }
381 
382           if (!sc->sc_enabled) {
383                     DPRINTFN(1, ("%s: intr: !sc_enabled\n",
384                                    device_xname(sc->sc_dev)));
385                     intc_intr_disable(SH7709_INTEVT2_IRQ3);
386                     goto served;
387           }
388 
389 
390           /*
391            * Number of times the "touched" bit should be read
392            * consecutively.
393            */
394 #         define TREMOR_THRESHOLD 0x300
395 
396           steady = 0;
397           tremor_timeout = TREMOR_THRESHOLD * 16; /* XXX: arbitrary */
398           touched = PHDR_TP_PEN_DOWN;   /* we start with "touched" state */
399 
400           do {
401                     phdr = _reg_read_1(SH7709_PHDR);
402 
403                     if ((phdr & PHDR_TP_PEN_DOWN) == touched)
404                               ++steady;
405                     else {
406                               steady = 0;
407                               touched = phdr & PHDR_TP_PEN_DOWN;
408                     }
409 
410                     if (--tremor_timeout == 0) {
411                               DPRINTF(("%s: tremor timeout!\n",
412                                          device_xname(sc->sc_dev)));
413                               goto served;
414                     }
415           } while (steady < TREMOR_THRESHOLD);
416 
417           if (touched) {
418                     intc_intr_disable(SH7709_INTEVT2_IRQ3);
419 
420                     /*
421                      * ADC readings are not stable yet, so schedule
422                      * callout instead of accessing ADC from the interrupt
423                      * handler only to immediately delay().
424                      */
425                     callout_reset(&sc->sc_touch_ch, hz/32,
426                                     j6x0tp_start_polling, sc);
427           } else
428                     DPRINTFN(1, ("%s: tremor\n", device_xname(sc->sc_dev)));
429   served:
430           /* clear the interrupt (XXX: protect access?) */
431           _reg_write_1(SH7709_IRR0, irr0 & ~IRR0_IRQ3);
432 
433           return (1);
434 }
435 
436 
437 /*
438  * Called from the interrupt handler at spltty() upon first touch.
439  * Decide if we are going to report this touch as a mouse click/drag
440  * or as a key press.
441  */
442 static void
j6x0tp_start_polling(void * arg)443 j6x0tp_start_polling(void *arg)
444 {
445           struct j6x0tp_softc *sc = arg;
446           uint8_t phdr;
447           int do_mouse, do_kbd;
448           int rawx, rawy;
449           int icon;
450 
451           phdr = _reg_read_1(SH7709_PHDR);
452           if ((phdr & PHDR_TP_PEN_DOWN) == 0) {
453                     DPRINTFN(2, ("%s: start: pen is not down\n",
454                                    device_xname(sc->sc_dev)));
455                     j6x0tp_stop_polling(sc);
456           }
457 
458           j6x0tp_get_raw_xy(&rawx, &rawy);
459           DPRINTFN(2, ("%s: start: %4d %4d -> ",
460                          device_xname(sc->sc_dev), rawx, rawy));
461 
462           do_mouse = sc->sc_enabled & J6X0TP_WSMOUSE_ENABLED;
463 #ifdef J6X0TP_WSMOUSE_EXCLUSIVE
464           if (do_mouse)
465                     do_kbd = 0;
466           else
467 #endif
468                     do_kbd = sc->sc_enabled & J6X0TP_WSKBD_ENABLED;
469 
470           icon = 0;
471           if (do_kbd)
472                     icon = j6x0tp_get_hard_icon(rawx, rawy);
473 
474           if (icon != 0) {
475                     DPRINTFN(2, ("icon %d\n", icon));
476                     sc->sc_hard_icon = icon;
477                     wskbd_input(sc->sc_wskbddev, WSCONS_EVENT_KEY_DOWN, icon);
478                     callout_reset(&sc->sc_touch_ch, hz/32,
479                                     j6x0tp_callout_wskbd, sc);
480           } else if (do_mouse) {
481                     DPRINTFN(2, ("mouse\n"));
482                     j6x0tp_wsmouse_input(sc, rawx, rawy);
483                     callout_reset(&sc->sc_touch_ch, hz/32,
484                                     j6x0tp_callout_wsmouse, sc);
485           } else {
486                     DPRINTFN(2, ("ignore\n"));
487                     j6x0tp_stop_polling(sc);
488           }
489 }
490 
491 
492 /*
493  * Re-enable touch panel interrupt.
494  * Called as spltty() when polling code detects pen-up.
495  */
496 static void
j6x0tp_stop_polling(struct j6x0tp_softc * sc)497 j6x0tp_stop_polling(struct j6x0tp_softc *sc)
498 {
499           uint8_t irr0;
500 
501           DPRINTFN(2, ("%s: stop\n", device_xname(sc->sc_dev)));
502 
503           /* clear pending interrupt signal before re-enabling the interrupt */
504           irr0 = _reg_read_1(SH7709_IRR0);
505           if ((irr0 & IRR0_IRQ3) != 0)
506                     _reg_write_1(SH7709_IRR0, irr0 & ~IRR0_IRQ3);
507 
508           intc_intr_enable(SH7709_INTEVT2_IRQ3);
509 }
510 
511 
512 /*
513  * We are reporting this touch as a keyboard event.
514  * Poll touch screen waiting for pen-up.
515  */
516 static void
j6x0tp_callout_wskbd(void * arg)517 j6x0tp_callout_wskbd(void *arg)
518 {
519           struct j6x0tp_softc *sc = arg;
520           uint8_t phdr;
521           int s;
522 
523           s = spltty();
524 
525           if (!sc->sc_enabled) {
526                     DPRINTFN(1, ("%s: wskbd callout: !sc_enabled\n",
527                                    device_xname(sc->sc_dev)));
528                     splx(s);
529                     return;
530           }
531 
532           phdr = _reg_read_1(SH7709_PHDR);
533           if ((phdr & PHDR_TP_PEN_DOWN) != 0) {
534                     /*
535                      * Pen is still down, continue polling.  Wskbd's
536                      * auto-repeat takes care of repeating the key.
537                      */
538                     callout_schedule(&sc->sc_touch_ch, hz/32);
539           } else {
540                     wskbd_input(sc->sc_wskbddev,
541                                   WSCONS_EVENT_KEY_UP, sc->sc_hard_icon);
542                     j6x0tp_stop_polling(sc);
543           }
544           splx(s);
545 }
546 
547 
548 /*
549  * We are reporting this touch as a mouse click/drag.
550  */
551 static void
j6x0tp_callout_wsmouse(void * arg)552 j6x0tp_callout_wsmouse(void *arg)
553 {
554           struct j6x0tp_softc *sc = arg;
555           uint8_t phdr;
556           int rawx, rawy;
557           int s;
558 
559           s = spltty();
560 
561           if (!sc->sc_enabled) {
562                     DPRINTFN(1, ("%s: wsmouse callout: !sc_enabled\n",
563                                    device_xname(sc->sc_dev)));
564                     splx(s);
565                     return;
566           }
567 
568           phdr = _reg_read_1(SH7709_PHDR);
569           if ((phdr & PHDR_TP_PEN_DOWN) != 0) {
570                     j6x0tp_get_raw_xy(&rawx, &rawy);
571                     j6x0tp_wsmouse_input(sc, rawx, rawy); /* mouse dragged */
572                     callout_schedule(&sc->sc_touch_ch, hz/32);
573           } else {
574                     wsmouse_input(sc->sc_wsmousedev, 0, 0, 0, 0, 0, /* button up */
575                                     WSMOUSE_INPUT_DELTA);
576                     j6x0tp_stop_polling(sc);
577           }
578           splx(s);
579 }
580 
581 
582 /*
583  * Report mouse click/drag.
584  */
585 static void
j6x0tp_wsmouse_input(struct j6x0tp_softc * sc,int rawx,int rawy)586 j6x0tp_wsmouse_input(struct j6x0tp_softc *sc, int rawx, int rawy)
587 {
588           int x, y;
589 
590           tpcalib_trans(&sc->sc_tpcalib, rawx, rawy, &x, &y);
591 
592           DPRINTFN(3, ("%s: %4d %4d -> %3d %3d\n",
593                          device_xname(sc->sc_dev), rawx, rawy, x, y));
594 
595           wsmouse_input(sc->sc_wsmousedev,
596                               1,        /* button */
597                               x, y, 0, 0,
598                               WSMOUSE_INPUT_ABSOLUTE_X | WSMOUSE_INPUT_ABSOLUTE_Y);
599 }
600 
601 
602 /*
603  * Read raw X/Y coordinates from the ADC.
604  * XXX: protect accesses to SCPDR?
605  */
606 static void
j6x0tp_get_raw_xy(int * rawxp,int * rawyp)607 j6x0tp_get_raw_xy(int *rawxp, int *rawyp)
608 {
609           uint8_t scpdr;
610 
611           /* Y axis */
612           scpdr = _reg_read_1(SH7709_SCPDR);
613           scpdr |=  SCPDR_TP_SCAN_ENABLE;
614           scpdr &= ~SCPDR_TP_SCAN_Y; /* pull low to scan */
615           _reg_write_1(SH7709_SCPDR, scpdr);
616           delay(10);
617 
618           *rawyp = adc_sample_channel(ADC_CHANNEL_TP_Y);
619 
620           /* X axis */
621           scpdr = _reg_read_1(SH7709_SCPDR);
622           scpdr |=  SCPDR_TP_SCAN_Y;
623           scpdr &= ~SCPDR_TP_SCAN_X; /* pull low to scan */
624           _reg_write_1(SH7709_SCPDR, scpdr);
625           delay(10);
626 
627           *rawxp = adc_sample_channel(ADC_CHANNEL_TP_X);
628 
629           /* restore SCPDR */
630           scpdr = _reg_read_1(SH7709_SCPDR);
631           scpdr |=  SCPDR_TP_SCAN_X;
632           scpdr &= ~SCPDR_TP_SCAN_ENABLE;
633           _reg_write_1(SH7709_SCPDR, scpdr);
634 }
635 
636 
637 /*
638  * Check if the (rawx, rawy) is inside one of the 4 hard icons.
639  * Return the icon number 1..4, or 0 if not inside an icon.
640  */
641 static int
j6x0tp_get_hard_icon(int rawx,int rawy)642 j6x0tp_get_hard_icon(int rawx, int rawy)
643 {
644           if (rawx <= J6X0TP_FB_RIGHT)
645                     return (0);
646 
647           if (rawy < J6X0TP_HARD_ICON_MAX_Y(1))
648                     return (1);
649           else if (rawy < J6X0TP_HARD_ICON_MAX_Y(2))
650                     return (2);
651           else if (rawy < J6X0TP_HARD_ICON_MAX_Y(3))
652                     return (3);
653           else
654                     return (4);
655 }
656 
657 
658 static int
j6x0tp_wsmouse_ioctl(void * arg,u_long cmd,void * data,int flag,lwp_t * l)659 j6x0tp_wsmouse_ioctl(void *arg, u_long cmd, void *data, int flag, lwp_t *l)
660 {
661           struct j6x0tp_softc *sc = arg;
662 
663           return hpc_tpanel_ioctl(&sc->sc_tpcalib, cmd, data, flag, l);
664 }
665 
666 
667 static int
j6x0tp_wskbd_ioctl(void * arg,u_long cmd,void * data,int flag,lwp_t * l)668 j6x0tp_wskbd_ioctl(void *arg, u_long cmd, void *data, int flag, lwp_t *l)
669 {
670           /* struct j6x0tp_softc *sc = arg; */
671 
672           switch (cmd) {
673           case WSKBDIO_GTYPE:
674                     *(int *)data = WSKBD_TYPE_HPC_BTN; /* may be use new type? */
675                     return (0);
676 
677           case WSKBDIO_GETLEDS:
678                     *(int *)data = 0;
679                     return (0);
680 
681           default:
682                     return (EPASSTHROUGH);
683           }
684 }
685 
686 
687 static void
j6x0tp_wskbd_set_leds(void * arg,int leds)688 j6x0tp_wskbd_set_leds(void *arg, int leds)
689 {
690 
691           /* nothing to do*/
692           return;
693 }
694