1 /*        $NetBSD: rmixl_ehci.c,v 1.8 2021/08/07 16:18:59 thorpej Exp $         */
2 
3 /*-
4  * Copyright (c) 1998, 1999, 2000, 2002, 2003 The NetBSD Foundation, Inc.
5  * All rights reserved.
6  *
7  * This code is derived from software contributed to The NetBSD Foundation
8  * by Herb Peyerl of Middle Digital Inc.
9  *
10  * Redistribution and use in source and binary forms, with or without
11  * modification, are permitted provided that the following conditions
12  * are met:
13  * 1. Redistributions of source code must retain the above copyright
14  *    notice, this list of conditions and the following disclaimer.
15  * 2. Redistributions in binary form must reproduce the above copyright
16  *    notice, this list of conditions and the following disclaimer in the
17  *    documentation and/or other materials provided with the distribution.
18  *
19  * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
20  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
21  * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
22  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
23  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
24  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
25  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
26  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
27  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
28  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
29  * POSSIBILITY OF SUCH DAMAGE.
30  */
31 
32 #include <sys/cdefs.h>
33 __KERNEL_RCSID(0, "$NetBSD: rmixl_ehci.c,v 1.8 2021/08/07 16:18:59 thorpej Exp $");
34 
35 #include "locators.h"
36 
37 #include <sys/param.h>
38 #include <sys/systm.h>
39 #include <sys/device.h>
40 
41 #include <sys/bus.h>
42 
43 #include <mips/rmi/rmixlreg.h>
44 #include <mips/rmi/rmixlvar.h>
45 #include <mips/rmi/rmixl_intr.h>
46 #include <mips/rmi/rmixl_usbivar.h>
47 
48 #include <dev/usb/usb.h>
49 #include <dev/usb/usbdi.h>
50 #include <dev/usb/usbdivar.h>
51 #include <dev/usb/usb_mem.h>
52 
53 #include <dev/usb/ehcireg.h>
54 #include <dev/usb/ehcivar.h>
55 
56 
57 static int          rmixl_ehci_match(device_t, cfdata_t, void *);
58 static void         rmixl_ehci_attach(device_t, device_t, void *);
59 
60 
61 CFATTACH_DECL_NEW(rmixl_ehci, sizeof (ehci_softc_t),
62     rmixl_ehci_match, rmixl_ehci_attach, NULL, NULL);
63 
64 int
rmixl_ehci_match(device_t parent,cfdata_t match,void * aux)65 rmixl_ehci_match(device_t parent, cfdata_t match, void *aux)
66 {
67           struct rmixl_usbi_attach_args *usbi = aux;
68 
69         if (usbi->usbi_addr == (RMIXL_IO_DEV_USB_A + RMIXL_USB_HOST_EHCI_BASE))
70                 return rmixl_probe_4((volatile uint32_t *)
71                               RMIXL_IOREG_VADDR(usbi->usbi_addr));
72 
73         return 0;
74 }
75 
76 void
rmixl_ehci_attach(device_t parent,device_t self,void * aux)77 rmixl_ehci_attach(device_t parent, device_t self, void *aux)
78 {
79           ehci_softc_t * const sc = device_private(self);
80           rmixl_usbi_softc_t * const psc = device_private(parent);
81           struct rmixl_usbi_attach_args * const usbi = aux;
82           void *ih = NULL;
83           uint32_t r;
84 
85           /* check state of IO_AD9 signal latched in GPIO Reset Config reg */
86           r = RMIXL_IOREG_READ(RMIXL_IO_DEV_GPIO + RMIXL_GPIO_RESET_CFG);
87           if ((r & RMIXL_GPIO_RESET_CFG_USB_DEV) == 0) {
88                     aprint_error_dev(self,
89                               "IO_AD9 selects Device mode, abort Host attach\n");
90                     return;
91           }
92 
93           sc->sc_dev = self;
94           sc->sc_bus.ub_hcpriv = sc;
95           sc->iot = usbi->usbi_el_bst;
96           sc->sc_size = usbi->usbi_size;
97           sc->sc_bus.ub_dmatag = usbi->usbi_dmat;
98           sc->sc_bus.ub_revision = USBREV_1_0;
99 
100           /*
101            * Grab the companion OHCI devices from our parent.
102            */
103           if (psc->sc_ohci_devs[1] != NULL) {
104                     sc->sc_comps[0] = psc->sc_ohci_devs[0];
105                     sc->sc_comps[1] = psc->sc_ohci_devs[1];
106                     sc->sc_ncomp = 2;
107           } else {
108                     sc->sc_comps[0] = psc->sc_ohci_devs[0];
109                     sc->sc_ncomp = 1;
110           }
111 
112           if (bus_space_map(sc->iot, usbi->usbi_addr, sc->sc_size, 0, &sc->ioh)) {
113                     aprint_error_dev(self, "unable to map registers\n");
114                     return;
115           }
116 
117           /* get offset to operational regs */
118           sc->sc_offs = EREAD1(sc, EHCI_CAPLENGTH);
119 
120           /* Disable EHCI interrupts */
121           EOWRITE4(sc, EHCI_USBINTR, 0);
122 
123           /* establish interrupt */
124           if (usbi->usbi_intr != RMIXL_USBICF_INTR_DEFAULT) {
125                     ih = rmixl_usbi_intr_establish(device_private(parent),
126                               usbi->usbi_intr, ehci_intr, sc);
127                     if (ih == NULL)
128                               panic("%s: couldn't establish interrupt",
129                                         device_xname(self));
130           }
131 
132           int err = ehci_init(sc);
133           if (err) {
134                     aprint_error_dev(self, "init failed, error=%d\n", err);
135                     if (ih != NULL)
136                               rmixl_intr_disestablish(ih);
137                     return;
138           }
139 
140           /* Attach USB device */
141           sc->sc_child = config_found(self, &sc->sc_bus, usbctlprint, CFARGS_NONE);
142 }
143 
144