1 /*        $NetBSD: aic77xx.c,v 1.8 2009/03/14 15:36:17 dsl Exp $      */
2 
3 /*
4  * Common routines for AHA-27/284X and aic7770 motherboard SCSI controllers.
5  *
6  * Copyright (c) 1994, 1995, 1996, 1997, 1998 Justin T. Gibbs.
7  * All rights reserved.
8  *
9  * Redistribution and use in source and binary forms, with or without
10  * modification, are permitted provided that the following conditions
11  * are met:
12  * 1. Redistributions of source code must retain the above copyright
13  *    notice immediately at the beginning of the file, without modification,
14  *    this list of conditions, and the following disclaimer.
15  * 2. The name of the author may not be used to endorse or promote products
16  *    derived from this software without specific prior written permission.
17  *
18  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
19  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
20  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
21  * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
22  * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
23  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
24  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
25  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
26  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
27  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
28  * SUCH DAMAGE.
29  *
30  * $FreeBSD: src/sys/dev/aic7xxx/ahc_eisa.c,v 1.15 2000/01/29 14:22:19 peter Exp $
31  */
32 
33 #include <sys/cdefs.h>
34 __KERNEL_RCSID(0, "$NetBSD: aic77xx.c,v 1.8 2009/03/14 15:36:17 dsl Exp $");
35 
36 #include <sys/param.h>
37 #include <sys/systm.h>
38 #include <sys/device.h>
39 
40 #include <sys/bus.h>
41 #include <sys/intr.h>
42 
43 #include <dev/scsipi/scsi_all.h>
44 #include <dev/scsipi/scsipi_all.h>
45 #include <dev/scsipi/scsiconf.h>
46 
47 #include <dev/ic/aic7xxx_osm.h>
48 #include <dev/ic/aic7xxx_inline.h>
49 #include <dev/ic/aic77xxreg.h>
50 #include <dev/ic/aic77xxvar.h>
51 
52 /*
53  * Return irq setting of the board, otherwise -1.
54  */
55 int
ahc_aic77xx_irq(bus_space_tag_t iot,bus_space_handle_t ioh)56 ahc_aic77xx_irq(bus_space_tag_t iot, bus_space_handle_t ioh)
57 {
58           int irq;
59           u_int8_t intdef;
60           u_int8_t hcntrl;
61 
62           /* Pause the card preseving the IRQ type */
63           hcntrl = bus_space_read_1(iot, ioh, HCNTRL) & IRQMS;
64           bus_space_write_1(iot, ioh, HCNTRL, hcntrl | PAUSE);
65 
66           intdef = bus_space_read_1(iot, ioh, INTDEF);
67           irq = (intdef & INTDEF_IRQ_MASK);
68           switch (irq) {
69           case 9:
70           case 10:
71           case 11:
72           case 12:
73           case 14:
74           case 15:
75                     break;
76           default:
77                     printf("ahc_aic77xx_irq: illegal irq setting %d\n", intdef);
78                     return (-1);
79           }
80 
81           return (irq);
82 }
83 
84 int
ahc_aic77xx_attach(struct ahc_softc * ahc)85 ahc_aic77xx_attach(struct ahc_softc *ahc)
86 {
87           u_int8_t sblkctl;
88           u_int8_t sblkctl_orig;
89           u_int8_t hostconf;
90 
91           /*
92            * See if we have a Rev E or higher aic7770. Anything below a
93            * Rev E will have a R/O autoflush disable configuration bit.
94            */
95           sblkctl_orig = ahc_inb(ahc, SBLKCTL);
96           sblkctl = sblkctl_orig ^ AUTOFLUSHDIS;
97           ahc_outb(ahc, SBLKCTL, sblkctl);
98           sblkctl = ahc_inb(ahc, SBLKCTL);
99           if (sblkctl != sblkctl_orig) {
100                     printf("%s: aic7770 >= Rev E: R/O autoflush enabled\n",
101                         ahc_name(ahc));
102                     /*
103                      * Ensure autoflush is enabled
104                      */
105                     sblkctl &= ~AUTOFLUSHDIS;
106                     ahc_outb(ahc, SBLKCTL, sblkctl);
107           }
108 
109           /* Setup the FIFO threshold and the bus off time */
110           hostconf = ahc_inb(ahc, HOSTCONF);
111           ahc_outb(ahc, BUSSPD, hostconf & DFTHRSH);
112           ahc_outb(ahc, BUSTIME, (hostconf << 2) & BOFF);
113 
114           /*
115            * Generic aic7xxx initialization.
116            */
117           if (ahc_init(ahc)) {
118                     /*
119                      * The board's IRQ line is not yet enabled so it's safe
120                      * to release the irq.
121                      */
122                     return (ENXIO);
123           }
124 
125           /*
126            * Enable the board's BUS drivers
127            */
128           ahc_outb(ahc, BCTL, ENABLE);
129 
130           /* Attach sub-devices - always succeeds */
131           ahc_attach(ahc);
132 
133           return 0;
134 }
135