src/trunk/Makefile.inc1

#
# $FreeBSD: src/Makefile.inc1,v 1.499.2.7 2006/01/07 19:40:08 netchild Exp $
# $MidnightBSD: src/Makefile.inc1,v 1.28 2011/03/13 02:05:39 laffer1 Exp $
#
# Make command line options:
#       -DNO_CLEANDIR run ${MAKE} clean, instead of ${MAKE} cleandir
#       -DNO_CLEAN do not clean at all
#       -DNO_SHARE do not go into share subdir
#       -DNO_KERNELCONFIG do not run config in ${MAKE} buildkernel
#       -DNO_KERNELCLEAN do not run ${MAKE} clean in ${MAKE} buildkernel
#       -DNO_KERNELDEPEND do not run ${MAKE} depend in ${MAKE} buildkernel
#       -DNO_PORTSUPDATE do not update ports in ${MAKE} update
#       -DNO_DOCUPDATE do not update doc in ${MAKE} update
#       LOCAL_DIRS="list of dirs" to add additional dirs to the SUBDIR list
#       TARGET="machine" to crossbuild world for a different machine type

#
# The intended user-driven targets are:
# buildworld  - rebuild *everything*, including glue to help do upgrades
# installworld- install everything built by "buildworld"
# doxygen     - build API documentation of the kernel
# update      - convenient way to update your source tree (eg: cvsup/cvs)
#
# Standard targets (not defined here) are documented in the makefiles in
# /usr/share/mk.  These include:
#               obj depend all install clean cleandepend cleanobj

.include <bsd.own.mk>

# We must do share/info early so that installation of info `dir'
# entries works correctly.  Do it first since it is less likely to
# grow dependencies on include and lib than vice versa.
#
# We must do lib/ and libexec/ before bin/, because if installworld
# installs a new /bin/sh, the 'make' command will *immediately*
# use that new version.  And the new (dynamically-linked) /bin/sh
# will expect to find appropriate libraries in /lib and /libexec.
#
SUBDIR= share/info lib libexec
SUBDIR+=bin
.if ${MK_APACHE} != "no"
SUBDIR+=apache
.endif
.if ${MK_GAMES} != "no"
SUBDIR+=games
.endif
.if ${MK_CDDL} != "no"
SUBDIR+=cddl
.endif
SUBDIR+=gnu include
.if ${MK_KERBEROS} != "no"
SUBDIR+=kerberos5
.endif
.if ${MK_RESCUE} != "no"
SUBDIR+=rescue
.endif
SUBDIR+=sbin
.if ${MK_CRYPT} != "no"
SUBDIR+=secure
.endif
.if !defined(NO_SHARE)
SUBDIR+=share
.endif
SUBDIR+=sys usr.bin usr.sbin
#
# We must do etc/ last for install/distribute to work.
#
SUBDIR+=etc

# These are last, since it is nice to at least get the base system
# rebuilt before you do them.
.for _DIR in ${LOCAL_DIRS}
.if exists(${.CURDIR}/${_DIR}/Makefile)
SUBDIR+= ${_DIR}
.endif
.endfor

.if defined(SUBDIR_OVERRIDE)
SUBDIR=         ${SUBDIR_OVERRIDE}
.endif

.if defined(NOCLEAN)
NO_CLEAN=       ${NOCLEAN}
.endif
.if defined(NO_CLEANDIR)
CLEANDIR=       clean cleandepend
.else
CLEANDIR=       cleandir
.endif

CVS?=           cvs
CVSFLAGS?=      -r . -P -d -I!
SUP?=           /usr/local/bin/cvsup
SUPFLAGS?=      -g -L 2
.if defined(SUPHOST)
SUPFLAGS+=      -h ${SUPHOST}
.endif

MAKEOBJDIRPREFIX?=      /usr/obj
.if !defined(OSRELDATE)
.if exists(/usr/include/osreldate.h)
OSRELDATE!=     awk '/^\#define[[:space:]]*__MidnightBSD_version/ { print $$3 }' \
                /usr/include/osreldate.h
.else
OSRELDATE=      0
.endif
.endif

# Guess machine architecture from machine type, and vice versa.
.if !defined(TARGET_ARCH) && defined(TARGET)
TARGET_ARCH=    ${TARGET:S/pc98/i386/:S/sun4v/sparc64/}
.elif !defined(TARGET) && defined(TARGET_ARCH) && \
    ${TARGET_ARCH} != ${MACHINE_ARCH}
TARGET=         ${TARGET_ARCH}
.endif
# Otherwise, default to current machine type and architecture.
TARGET?=        ${MACHINE}
TARGET_ARCH?=   ${MACHINE_ARCH}

KNOWN_ARCHES?=  amd64 i386 sparc64 sparc64/sun4v
.if ${TARGET} == ${TARGET_ARCH}
_t=             ${TARGET}
.else
_t=             ${TARGET_ARCH}/${TARGET}
.endif
.for _t in ${_t}
.if empty(KNOWN_ARCHES:M${_t})
.error Unknown target ${TARGET_ARCH}:${TARGET}.
.endif
.endfor

.if ${TARGET} == ${MACHINE}
TARGET_CPUTYPE?=${CPUTYPE}
.else
TARGET_CPUTYPE?=
.endif

.if !empty(TARGET_CPUTYPE)
_TARGET_CPUTYPE=${TARGET_CPUTYPE}
.else
_TARGET_CPUTYPE=dummy
.endif
_CPUTYPE!=      MAKEFLAGS= CPUTYPE=${_TARGET_CPUTYPE} ${MAKE} \
                -f /dev/null -m ${.CURDIR}/share/mk -V CPUTYPE
.if ${_CPUTYPE} != ${_TARGET_CPUTYPE}
.error CPUTYPE global should be set with ?=.
.endif
.if make(buildworld)
BUILD_ARCH!=    uname -p
.if ${MACHINE_ARCH} != ${BUILD_ARCH}
.error To cross-build, set TARGET_ARCH.
.endif
.endif
.if ${MACHINE} == ${TARGET} && ${MACHINE_ARCH} == ${TARGET_ARCH} && !defined(CROSS_BUILD_TESTING)
OBJTREE=        ${MAKEOBJDIRPREFIX}
.else
OBJTREE=        ${MAKEOBJDIRPREFIX}/${TARGET}.${TARGET_ARCH}
.endif
WORLDTMP=       ${OBJTREE}${.CURDIR}/tmp
# /usr/games added for fortune which depend on strfile
BPATH=          ${WORLDTMP}/legacy/usr/sbin:${WORLDTMP}/legacy/usr/bin:${WORLDTMP}/legacy/usr/games
XPATH=          ${WORLDTMP}/usr/sbin:${WORLDTMP}/usr/bin:${WORLDTMP}/usr/games
STRICTTMPPATH=  ${BPATH}:${XPATH}
TMPPATH=        ${STRICTTMPPATH}:${PATH}

INSTALLTMP!=    /usr/bin/mktemp -d -u -t install

#
# Building a world goes through the following stages
#
# 1. legacy stage [BMAKE]
#       This stage is responsible for creating compatibility
#       shims that are needed by the bootstrap-tools,
#       build-tools and cross-tools stages.
# 1. bootstrap-tools stage [BMAKE]
#       This stage is responsible for creating programs that
#       are needed for backward compatibility reasons. They
#       are not built as cross-tools.
# 2. build-tools stage [TMAKE]
#       This stage is responsible for creating the object
#       tree and building any tools that are needed during
#       the build process.
# 3. cross-tools stage [XMAKE]
#       This stage is responsible for creating any tools that
#       are needed for cross-builds. A cross-compiler is one
#       of them.
# 4. world stage [WMAKE]
#       This stage actually builds the world.
# 5. install stage (optional) [IMAKE]
#       This stage installs a previously built world.
#

BOOTSTRAPPING?= 0

# Common environment for world related stages
CROSSENV=       MAKEOBJDIRPREFIX=${OBJTREE} \
                MACHINE_ARCH=${TARGET_ARCH} \
                MACHINE=${TARGET} \
                CPUTYPE=${TARGET_CPUTYPE} \
                GROFF_BIN_PATH=${WORLDTMP}/legacy/usr/bin \
                GROFF_FONT_PATH=${WORLDTMP}/legacy/usr/share/groff_font \
                GROFF_TMAC_PATH=${WORLDTMP}/legacy/usr/share/tmac

# bootstrap-tools stage
BMAKEENV=       INSTALL="sh ${.CURDIR}/tools/install.sh" \
                PATH=${BPATH}:${PATH} \
                WORLDTMP=${WORLDTMP} \
                MAKEFLAGS="-m ${.CURDIR}/tools/build/mk ${.MAKEFLAGS}"
BMAKE=          MAKEOBJDIRPREFIX=${WORLDTMP} \
                ${BMAKEENV} ${MAKE} -f Makefile.inc1 \
                DESTDIR= \
                BOOTSTRAPPING=${OSRELDATE} \
                -DWITHOUT_HTML -DWITHOUT_INFO -DNO_LINT -DWITHOUT_MAN \
                -DWITHOUT_NLS -DNO_PIC -DWITHOUT_PROFILE -DNO_SHARED \
                -DNO_CPU_CFLAGS -DNO_WARNS

# build-tools stage
TMAKE=          MAKEOBJDIRPREFIX=${OBJTREE} \
                ${BMAKEENV} ${MAKE} -f Makefile.inc1 \
                TARGET=${TARGET} TARGET_ARCH=${TARGET_ARCH} \
                DESTDIR= \
                BOOTSTRAPPING=${OSRELDATE} -DNO_LINT -DNO_CPU_CFLAGS -DNO_WARNS

# cross-tools stage
XMAKE=          TOOLS_PREFIX=${WORLDTMP} ${BMAKE} \
                TARGET=${TARGET} TARGET_ARCH=${TARGET_ARCH} \
                -DWITHOUT_GDB

# world stage
WMAKEENV=       ${CROSSENV} \
                _SHLIBDIRPREFIX=${WORLDTMP} \
                INSTALL="sh ${.CURDIR}/tools/install.sh" \
                PATH=${TMPPATH}
WMAKE=          ${WMAKEENV} ${MAKE} -f Makefile.inc1 DESTDIR=${WORLDTMP}

.if ${TARGET_ARCH} == "amd64"
# 32 bit world
LIB32TMP=       ${OBJTREE}${.CURDIR}/lib32

.if empty(TARGET_CPUTYPE)
LIB32CPUTYPE=   k8
.else
LIB32CPUTYPE=   ${TARGET_CPUTYPE}
.endif
LIB32FLAGS=     -m32 -march=${LIB32CPUTYPE} -mfancy-math-387 -DCOMPAT_32BIT \
                -iprefix ${LIB32TMP}/usr/ \
                -L${LIB32TMP}/usr/lib32 \
                -B${LIB32TMP}/usr/lib32

# Yes, the flags are redundant.
LIB32WMAKEENV=  MAKEOBJDIRPREFIX=${OBJTREE}/lib32 \
                _SHLIBDIRPREFIX=${LIB32TMP} \
                MACHINE=i386 \
                MACHINE_ARCH=i386 \
                INSTALL="sh ${.CURDIR}/tools/install.sh" \
                PATH=${TMPPATH} \
                CC="${CC} ${LIB32FLAGS}" \
                CXX="${CXX} ${LIB32FLAGS}" \
                OBJC="${OBJC} ${LIB32FLAGS}" \
                LD="${LD} -m elf_i386_fbsd -Y P,${LIB32TMP}/usr/lib32" \
                AS="${AS} --32" \
                LIBDIR=/usr/lib32 \
                SHLIBDIR=/usr/lib32

LIB32WMAKE=     ${LIB32WMAKEENV} ${MAKE} -DNO_CPU_CFLAGS -DCOMPAT_32BIT \
                -DWITHOUT_BIND -DWITHOUT_MAN -DWITHOUT_NLS -DWITHOUT_INFO \
                -DWITHOUT_HTML DESTDIR=${LIB32TMP}
LIB32IMAKE=     ${LIB32WMAKE:NINSTALL=*:NDESTDIR=*} -DNO_INCS
.endif

# install stage
.if empty(.MAKEFLAGS:M-n)
IMAKEENV=       ${CROSSENV} \
                PATH=${STRICTTMPPATH}:${INSTALLTMP}
.else
IMAKEENV=       ${CROSSENV} \
                PATH=${TMPPATH}:${INSTALLTMP}
.endif
IMAKE=          ${IMAKEENV} ${MAKE} -f Makefile.inc1

# kernel stage
KMAKEENV=       ${WMAKEENV}
KMAKE=          ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME}

#
# buildworld
#
# Attempt to rebuild the entire system, with reasonable chance of
# success, regardless of how old your existing system is.
#
_worldtmp:
.if ${.CURDIR:C/[^,]//g} != ""
#       The m4 build of sendmail files doesn't like it if ',' is used
#       anywhere in the path of it's files.
        @echo
        @echo "*** Error: path to source tree contains a comma ','"
        @echo
        false
.endif
        @echo
        @echo "--------------------------------------------------------------"
        @echo ">>> Rebuilding the temporary build tree"
        @echo "--------------------------------------------------------------"
.if !defined(NO_CLEAN)
        rm -rf ${WORLDTMP}
.if ${TARGET_ARCH} == "amd64"
        rm -rf ${LIB32TMP}
.endif
.else
        rm -rf ${WORLDTMP}/legacy/usr/include
#       XXX - These two can depend on any header file.
        rm -f ${OBJTREE}${.CURDIR}/usr.bin/kdump/ioctl.c
        rm -f ${OBJTREE}${.CURDIR}/usr.bin/truss/ioctl.c
.endif
.for _dir in \
    usr/bin usr/games usr/include/sys usr/lib \
    usr/libexec usr/sbin usr/share/dict \
    usr/share/groff_font/devX100 \
    usr/share/groff_font/devX100-12 \
    usr/share/groff_font/devX75 \
    usr/share/groff_font/devX75-12 \
    usr/share/groff_font/devascii \
    usr/share/groff_font/devcp1047 \
    usr/share/groff_font/devdvi \
    usr/share/groff_font/devhtml \
    usr/share/groff_font/devkoi8-r \
    usr/share/groff_font/devlatin1 \
    usr/share/groff_font/devlbp \
    usr/share/groff_font/devlj4 \
    usr/share/groff_font/devps \
    usr/share/groff_font/devutf8 \
    usr/share/tmac/mdoc usr/share/tmac/mm
        mkdir -p ${WORLDTMP}/legacy/${_dir}
.endfor
.for _dir in \
    lib usr/bin usr/include usr/lib/compat/aout usr/libdata/ldscripts \
    usr/libdata/pkgconfig usr/libexec usr/sbin usr/share/misc
        mkdir -p ${WORLDTMP}/${_dir}
.endfor
        mtree -deU -f ${.CURDIR}/etc/mtree/BSD.include.dist \
            -p ${WORLDTMP}/usr/include >/dev/null
        ln -sf ${.CURDIR}/sys ${WORLDTMP}
.if ${MK_BIND_LIBS} != "no"
        mtree -deU -f ${.CURDIR}/etc/mtree/BIND.include.dist \
            -p ${WORLDTMP}/usr/include >/dev/null
.endif
_legacy:
        @echo
        @echo "--------------------------------------------------------------"
        @echo ">>> stage 1.1: legacy release compatibility shims"
        @echo "--------------------------------------------------------------"
        ${_+_}cd ${.CURDIR}; ${BMAKE} legacy
_bootstrap-tools:
        @echo
        @echo "--------------------------------------------------------------"
        @echo ">>> stage 1.2: bootstrap tools"
        @echo "--------------------------------------------------------------"
        ${_+_}cd ${.CURDIR}; ${BMAKE} bootstrap-tools
_cleanobj:
.if !defined(NO_CLEAN)
        @echo
        @echo "--------------------------------------------------------------"
        @echo ">>> stage 2.1: cleaning up the object tree"
        @echo "--------------------------------------------------------------"
        ${_+_}cd ${.CURDIR}; ${WMAKE} ${CLEANDIR:S/^/par-/}
.if ${TARGET_ARCH} == "amd64"
        ${_+_}cd ${.CURDIR}; ${LIB32WMAKE} -f Makefile.inc1 ${CLEANDIR:S/^/par-/}
.endif
.endif
_obj:
        @echo
        @echo "--------------------------------------------------------------"
        @echo ">>> stage 2.2: rebuilding the object tree"
        @echo "--------------------------------------------------------------"
        ${_+_}cd ${.CURDIR}; ${WMAKE} par-obj
_build-tools:
        @echo
        @echo "--------------------------------------------------------------"
        @echo ">>> stage 2.3: build tools"
        @echo "--------------------------------------------------------------"
        ${_+_}cd ${.CURDIR}; ${TMAKE} build-tools
_cross-tools:
        @echo
        @echo "--------------------------------------------------------------"
        @echo ">>> stage 3: cross tools"
        @echo "--------------------------------------------------------------"
        ${_+_}cd ${.CURDIR}; ${XMAKE} cross-tools
_includes:
        @echo
        @echo "--------------------------------------------------------------"
        @echo ">>> stage 4.1: building includes"
        @echo "--------------------------------------------------------------"
        ${_+_}cd ${.CURDIR}; ${WMAKE} SHARED=symlinks par-includes
_libraries:
        @echo
        @echo "--------------------------------------------------------------"
        @echo ">>> stage 4.2: building libraries"
        @echo "--------------------------------------------------------------"
        ${_+_}cd ${.CURDIR}; \
            ${WMAKE} -DNO_FSCHG -DWITHOUT_HTML -DWITHOUT_INFO -DNO_LINT \
            -DWITHOUT_MAN -DWITHOUT_NLS -DWITHOUT_PROFILE libraries
_depend:
        @echo
        @echo "--------------------------------------------------------------"
        @echo ">>> stage 4.3: make dependencies"
        @echo "--------------------------------------------------------------"
        ${_+_}cd ${.CURDIR}; ${WMAKE} par-depend
everything:
        @echo
        @echo "--------------------------------------------------------------"
        @echo ">>> stage 4.4: building everything"
        @echo "--------------------------------------------------------------"
        ${_+_}cd ${.CURDIR}; ${WMAKE} par-all
.if ${TARGET_ARCH} == "amd64"
build32:
        @echo
        @echo "--------------------------------------------------------------"
        @echo ">>> stage 5.1: building 32 bit shim libraries"
        @echo "--------------------------------------------------------------"
.for _dir in \
    usr/include usr/lib32 usr/share/misc
        mkdir -p ${LIB32TMP}/${_dir}
.endfor
        mtree -deU -f ${.CURDIR}/etc/mtree/BSD.include.dist \
            -p ${LIB32TMP}/usr/include >/dev/null
        mkdir -p ${WORLDTMP}
        ln -sf ${.CURDIR}/sys ${WORLDTMP}
.if ${MK_KERBEROS} != "no"
.for _t in obj depend all
        cd ${.CURDIR}/kerberos5/tools; \
            MAKEOBJDIRPREFIX=${OBJTREE}/lib32 ${MAKE} DESTDIR= ${_t}
.endfor
.endif
.for _t in obj includes
        cd ${.CURDIR}/include; ${LIB32WMAKE} ${_t}
        cd ${.CURDIR}/lib; ${LIB32WMAKE} ${_t}
.if ${MK_APACHE} != "no"
        cd ${.CURDIR}/apache/lib; ${LIB32WMAKE} ${_t}
.endif
.if ${MK_CDDL} != "no"
        cd ${.CURDIR}/cddl/lib; ${LIB32WMAKE} ${_t}
.endif
        cd ${.CURDIR}/gnu/lib; ${LIB32WMAKE} ${_t}
.if ${MK_CRYPT} != "no"
        cd ${.CURDIR}/secure/lib; ${LIB32WMAKE} ${_t}
.endif
.if ${MK_KERBEROS} != "no"
        cd ${.CURDIR}/kerberos5/lib; ${LIB32WMAKE} ${_t}
.endif
.endfor
.for _dir in usr.bin/lex/lib
        cd ${.CURDIR}/${_dir}; ${LIB32WMAKE} obj
.endfor
.for _dir in lib/ncurses/ncurses lib/ncurses/ncursesw lib/libmagic
        cd ${.CURDIR}/${_dir}; \
            MAKEOBJDIRPREFIX=${OBJTREE}/lib32 ${MAKE} DESTDIR= build-tools
.endfor
        cd ${.CURDIR}; \
            ${LIB32WMAKE} -f Makefile.inc1 libraries
.for _t in obj depend all
        cd ${.CURDIR}/libexec/rtld-elf; \
            PROG=ld-elf32.so.1 ${LIB32WMAKE} ${_t}
.endfor

distribute32 install32:
.if make(distribute32)
        mkdir -p ${DISTDIR}/${DISTRIBUTION}/usr/lib32   # XXX add to mtree
.else
        mkdir -p ${DESTDIR}/usr/lib32                   # XXX add to mtree
.endif
        cd ${.CURDIR}/lib; ${LIB32IMAKE} ${.TARGET:S/32$//}
        cd ${.CURDIR}/gnu/lib; ${LIB32IMAKE} ${.TARGET:S/32$//}
.if ${MK_CRYPT} != "no"
        cd ${.CURDIR}/secure/lib; ${LIB32IMAKE} ${.TARGET:S/32$//}
.endif
        cd ${.CURDIR}/libexec/rtld-elf; PROG=ld-elf32.so.1 ${LIB32IMAKE} ${.TARGET:S/32$//}
.endif


WMAKE_TGTS=
.if !defined(SUBDIR_OVERRIDE)
WMAKE_TGTS+=    _worldtmp _legacy _bootstrap-tools
.endif
WMAKE_TGTS+=    _cleanobj _obj _build-tools
.if !defined(SUBDIR_OVERRIDE)
WMAKE_TGTS+=    _cross-tools
.endif
WMAKE_TGTS+=    _includes _libraries _depend everything
.if ${TARGET_ARCH} == "amd64" && ${MK_LIB32} != "no"
WMAKE_TGTS+=    build32
.endif

buildworld: buildworld_prologue ${WMAKE_TGTS} buildworld_epilogue
.ORDER: buildworld_prologue ${WMAKE_TGTS} buildworld_epilogue

buildworld_prologue:
        @echo "--------------------------------------------------------------"
        @echo ">>> World build started on `LC_ALL=C date`"
        @echo "--------------------------------------------------------------"

buildworld_epilogue:
        @echo
        @echo "--------------------------------------------------------------"
        @echo ">>> World build completed on `LC_ALL=C date`"
        @echo "--------------------------------------------------------------"

#
# We need to have this as a target because the indirection between Makefile
# and Makefile.inc1 causes the correct PATH to be used, rather than a
# modification of the current environment's PATH.  In addition, we need
# to quote multiword values.
#
buildenvvars:
        @echo ${WMAKEENV:Q}

buildenv:
        @echo Entering world for ${TARGET_ARCH}:${TARGET}
        @cd ${.CURDIR} && env ${WMAKEENV} sh || true

TOOLCHAIN_TGTS= ${WMAKE_TGTS:N_depend:Neverything:Nbuild32}
toolchain: ${TOOLCHAIN_TGTS}
kernel-toolchain: ${TOOLCHAIN_TGTS:N_includes:N_libraries}

#
# installcheck
#
# Checks to be sure system is ready for installworld/installkernel.
#
installcheck:

#
# Require DESTDIR to be set if installing for a different architecture.
#
.if ${TARGET_ARCH} != ${MACHINE_ARCH} || ${TARGET} != ${MACHINE}
.if !make(distributeworld)
installcheck: installcheck_DESTDIR
installcheck_DESTDIR:
.if !defined(DESTDIR) || empty(DESTDIR)
        @echo "ERROR: Please set DESTDIR!"; \
        false
.endif
.endif
.endif

#
# Check for missing UIDs/GIDs.
#
CHECK_UIDS=
CHECK_GIDS=     audit
.if ${MK_SENDMAIL} != "no"
CHECK_UIDS+=    smmsp
CHECK_GIDS+=    smmsp
.endif
.if ${MK_PF} != "no"
CHECK_UIDS+=    proxy
CHECK_GIDS+=    proxy authpf
.endif
installcheck: installcheck_UGID
installcheck_UGID:
.for uid in ${CHECK_UIDS}
        @if ! `id -u ${uid} >/dev/null 2>&1`; then \
                echo "ERROR: Required ${uid} user is missing, see /usr/src/UPDATING."; \
                false; \
        fi
.endfor
.for gid in ${CHECK_GIDS}
        @if ! `find / -prune -group ${gid} >/dev/null 2>&1`; then \
                echo "ERROR: Required ${gid} group is missing, see /usr/src/UPDATING."; \
                false; \
        fi
.endfor

#
# distributeworld
#
# Distributes everything compiled by a `buildworld'.
#
# installworld
#
# Installs everything compiled by a 'buildworld'.
#
distributeworld installworld: installcheck
        mkdir -p ${INSTALLTMP}
        for prog in [ awk cap_mkdb cat chflags chmod chown \
            date echo egrep find grep install-info \
            ln lockf make mkdir mtree mv pwd_mkdb rm sed sh sysctl \
            test true uname wc zic; do \
                cp `which $$prog` ${INSTALLTMP}; \
        done
        ${_+_}cd ${.CURDIR}; ${IMAKE} re${.TARGET:S/world$//}
        rm -rf ${INSTALLTMP}

#
# reinstall
#
# If you have a build server, you can NFS mount the source and obj directories
# and do a 'make reinstall' on the *client* to install new binaries from the
# most recent server build.
#
reinstall:
        @echo "--------------------------------------------------------------"
        @echo ">>> Making hierarchy"
        @echo "--------------------------------------------------------------"
        ${_+_}cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 hierarchy
        @echo
        @echo "--------------------------------------------------------------"
        @echo ">>> Installing everything"
        @echo "--------------------------------------------------------------"
        ${_+_}cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 install
.if ${TARGET_ARCH} == "amd64" && ${MK_LIB32} != "no"
        ${_+_}cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 install32
.endif

redistribute:
        @echo "--------------------------------------------------------------"
        @echo ">>> Distributing everything"
        @echo "--------------------------------------------------------------"
        ${_+_}cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 distribute
.if ${TARGET_ARCH} == "amd64" && ${MK_LIB32} != "no"
        ${_+_}cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 distribute32 DISTRIBUTION=lib32
.endif

distrib-dirs distribution:
        cd ${.CURDIR}/etc; ${CROSSENV} PATH=${TMPPATH} ${MAKE} ${.TARGET}

#
# buildkernel and installkernel
#
# Which kernels to build and/or install is specified by setting
# KERNCONF. If not defined a GENERIC kernel is built/installed.
# Only the existing (depending TARGET) config files are used
# for building kernels and only the first of these is designated
# as the one being installed.
#
# Note that we have to use TARGET instead of TARGET_ARCH when
# we're in kernel-land. Since only TARGET_ARCH is (expected) to
# be set to cross-build, we have to make sure TARGET is set
# properly.

.if !defined(KERNCONF) && defined(KERNEL)
KERNCONF=       ${KERNEL}
KERNWARN=
.else
KERNCONF?=      GENERIC
.endif
INSTKERNNAME?=  kernel

KERNSRCDIR?=    ${.CURDIR}/sys
KRNLCONFDIR=    ${KERNSRCDIR}/${TARGET}/conf
KRNLOBJDIR=     ${OBJTREE}${KERNSRCDIR}
KERNCONFDIR?=   ${KRNLCONFDIR}

BUILDKERNELS=
INSTALLKERNEL=
.for _kernel in ${KERNCONF}
.if exists(${KERNCONFDIR}/${_kernel})
BUILDKERNELS+=  ${_kernel}
.if empty(INSTALLKERNEL)
INSTALLKERNEL= ${_kernel}
.endif
.endif
.endfor

#
# buildkernel
#
# Builds all kernels defined by BUILDKERNELS.
#
buildkernel:
.if empty(BUILDKERNELS)
        @echo "ERROR: Missing kernel configuration file(s) (${KERNCONF})."; \
        false
.endif
.if defined(KERNWARN)
        @echo "--------------------------------------------------------------"
        @echo ">>> WARNING: KERNEL= setting should be changed to KERNCONF="
        @echo "--------------------------------------------------------------"
        @sleep 3
.endif
        @echo
.for _kernel in ${BUILDKERNELS}
        @echo "--------------------------------------------------------------"
        @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
        @echo "--------------------------------------------------------------"
        @echo "===> ${_kernel}"
        mkdir -p ${KRNLOBJDIR}
.if !defined(NO_KERNELCONFIG)
        @echo
        @echo "--------------------------------------------------------------"
        @echo ">>> stage 1: configuring the kernel"
        @echo "--------------------------------------------------------------"
        cd ${KRNLCONFDIR}; \
                PATH=${TMPPATH} \
                    config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
                        ${KERNCONFDIR}/${_kernel}
.endif
.if !defined(NO_CLEAN) && !defined(NO_KERNELCLEAN)
        @echo
        @echo "--------------------------------------------------------------"
        @echo ">>> stage 2.1: cleaning up the object tree"
        @echo "--------------------------------------------------------------"
        cd ${KRNLOBJDIR}/${_kernel}; ${KMAKE} ${CLEANDIR}
.endif
        @echo
        @echo "--------------------------------------------------------------"
        @echo ">>> stage 2.2: rebuilding the object tree"
        @echo "--------------------------------------------------------------"
        cd ${KRNLOBJDIR}/${_kernel}; ${KMAKE} obj
        @echo
        @echo "--------------------------------------------------------------"
        @echo ">>> stage 2.3: build tools"
        @echo "--------------------------------------------------------------"
        cd ${KRNLOBJDIR}/${_kernel}; \
            MAKESRCPATH=${KERNSRCDIR}/dev/aic7xxx/aicasm \
            ${MAKE} -DNO_CPU_CFLAGS -f ${KERNSRCDIR}/dev/aic7xxx/aicasm/Makefile
# XXX - Gratuitously builds aicasm in the ``makeoptions NO_MODULES'' case.
.if !defined(MODULES_WITH_WORLD) && !defined(NO_MODULES) && exists(${KERNSRCDIR}/modules)
.for target in obj depend all
        cd ${KERNSRCDIR}/modules/aic7xxx/aicasm; \
            MAKEOBJDIRPREFIX=${KRNLOBJDIR}/${_kernel}/modules \
            ${MAKE} -DNO_CPU_CFLAGS ${target}
.endfor
.endif
.if !defined(NO_KERNELDEPEND)
        @echo
        @echo "--------------------------------------------------------------"
        @echo ">>> stage 3.1: making dependencies"
        @echo "--------------------------------------------------------------"
        cd ${KRNLOBJDIR}/${_kernel}; ${KMAKE} depend -DNO_MODULES_OBJ
.endif
        @echo
        @echo "--------------------------------------------------------------"
        @echo ">>> stage 3.2: building everything"
        @echo "--------------------------------------------------------------"
        cd ${KRNLOBJDIR}/${_kernel}; ${KMAKE} all -DNO_MODULES_OBJ
        @echo "--------------------------------------------------------------"
        @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
        @echo "--------------------------------------------------------------"
.endfor

#
# installkernel, etc.
#
# Install the kernel defined by INSTALLKERNEL
#
installkernel installkernel.debug \
reinstallkernel reinstallkernel.debug: installcheck
.if empty(INSTALLKERNEL)
        @echo "ERROR: No kernel \"${KERNCONF}\" to install."; \
        false
.endif
        @echo "--------------------------------------------------------------"
        @echo ">>> Installing kernel"
        @echo "--------------------------------------------------------------"
        cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
            ${CROSSENV} PATH=${TMPPATH} \
            ${MAKE} KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel//}

#
# doxygen
#
# Build the API documentation with doxygen
#
doxygen:
        @if [ ! -x `/usr/bin/which doxygen` ]; then \
                echo "You need doxygen (devel/doxygen) to generate the API documentation of the kernel." | /usr/bin/fmt; \
                exit 1; \
        fi
        cd ${.CURDIR}/tools/kerneldoc/subsys && ${MAKE} obj all

#
# update
#
# Update the source tree, by running cvsup and/or running cvs to update to the
# latest copy.
#
update:
.if defined(SUP_UPDATE)
        @echo "--------------------------------------------------------------"
        @echo ">>> Running ${SUP}"
        @echo "--------------------------------------------------------------"
.if defined(SUPFILE)
        @${SUP} ${SUPFLAGS} ${SUPFILE}
.endif
.if defined(SUPFILE1)
        @${SUP} ${SUPFLAGS} ${SUPFILE1}
.endif
.if defined(SUPFILE2)
        @${SUP} ${SUPFLAGS} ${SUPFILE2}
.endif
.if defined(PORTSSUPFILE) && !defined(NO_PORTSUPDATE)
        @${SUP} ${SUPFLAGS} ${PORTSSUPFILE}
.endif
.if defined(DOCSUPFILE) && !defined(NO_DOCUPDATE)
        @${SUP} ${SUPFLAGS} ${DOCSUPFILE}
.endif
.endif
.if defined(CVS_UPDATE)
        @echo "--------------------------------------------------------------"
        @echo ">>> Updating ${.CURDIR} from CVS repository" ${CVSROOT}
        @echo "--------------------------------------------------------------"
        cd ${.CURDIR}; ${CVS} -R -q update ${CVSFLAGS}
.endif

#
# ------------------------------------------------------------------------
#
# From here onwards are utility targets used by the 'make world' and
# related targets.  If your 'world' breaks, you may like to try to fix
# the problem and manually run the following targets to attempt to
# complete the build.  Beware, this is *not* guaranteed to work, you
# need to have a pretty good grip on the current state of the system
# to attempt to manually finish it.  If in doubt, 'make world' again.
#

#
# legacy: Build compatibility shims for the next three targets
#
legacy:
.for _tool in tools/build
        ${_+_}@${ECHODIR} "===> ${_tool} (obj,includes,depend,all,install)"; \
            cd ${.CURDIR}/${_tool}; \
            ${MAKE} DIRPRFX=${_tool}/ obj; \
            ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX}/legacy includes; \
            ${MAKE} DIRPRFX=${_tool}/ depend; \
            ${MAKE} DIRPRFX=${_tool}/ all; \
            ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX}/legacy install
.endfor

#
# bootstrap-tools: Build tools needed for compatibility
#
.if ${MK_GAMES} != "no"
_strfile=       games/fortune/strfile
.endif

.if ${MK_CXX} != "no"
_gperf=         gnu/usr.bin/gperf
.if ${BOOTSTRAPPING} < 700004
_groff=         gnu/usr.bin/groff
.else
_groff=         gnu/usr.bin/groff/tmac
.endif
.endif

.if ${BOOTSTRAPPING} < 700018
_gensnmptree=   usr.sbin/bsnmpd/gensnmptree
.endif

.if ${MK_RESCUE} != "no" && \
    ${BOOTSTRAPPING} < 700026
_crunchgen=     usr.sbin/crunch/crunchgen
.endif

bootstrap-tools:
.for _tool in \
    ${_strfile} \
    ${_gperf} \
    ${_groff} \
    usr.bin/lorder \
    usr.bin/makewhatis \
    usr.bin/rpcgen \
    usr.bin/xinstall \
    ${_gensnmptree} \
    usr.sbin/config \
    ${_crunchgen}
        ${_+_}@${ECHODIR} "===> ${_tool} (obj,depend,all,install)"; \
                cd ${.CURDIR}/${_tool}; \
                ${MAKE} DIRPRFX=${_tool}/ obj; \
                ${MAKE} DIRPRFX=${_tool}/ depend; \
                ${MAKE} DIRPRFX=${_tool}/ all; \
                ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX}/legacy install
.endfor

#
# build-tools: Build special purpose build tools
#
.if defined(MODULES_WITH_WORLD) && exists(${KERNSRCDIR}/modules)
_aicasm= sys/modules/aic7xxx/aicasm
.endif

.if !defined(NO_SHARE)
_share= share/syscons/scrnmaps
.endif

.if ${MK_KERBEROS} != "no"
_kerberos5_tools= kerberos5/tools
.endif

.if ${MK_RESCUE} != "no"
_rescue= rescue/rescue
.endif

build-tools:
.for _tool in \
    bin/csh \
    bin/sh \
    ${_rescue} \
    lib/ncurses/ncurses \
    lib/ncurses/ncursesw \
    ${_share} \
    ${_aicasm} \
    usr.bin/awk \
    lib/libmagic \
    usr.sbin/sysinstall
        ${_+_}@${ECHODIR} "===> ${_tool} (obj,build-tools)"; \
                cd ${.CURDIR}/${_tool}; \
                ${MAKE} DIRPRFX=${_tool}/ obj; \
                ${MAKE} DIRPRFX=${_tool}/ build-tools
.endfor
.for _tool in \
    gnu/usr.bin/cc/cc_tools \
    ${_kerberos5_tools}
        ${_+_}@${ECHODIR} "===> ${_tool} (obj,depend,all)"; \
                cd ${.CURDIR}/${_tool}; \
                ${MAKE} DIRPRFX=${_tool}/ obj; \
                ${MAKE} DIRPRFX=${_tool}/ depend; \
                ${MAKE} DIRPRFX=${_tool}/ all
.endfor

#
# cross-tools: Build cross-building tools
#
.if ${TARGET_ARCH} != ${MACHINE_ARCH}
.if ${TARGET_ARCH} == "amd64" || ${TARGET_ARCH} == "i386"
_btxld=         usr.sbin/btxld
.endif
.if ${MK_RESCUE} != "no" || defined(RELEASEDIR)
_crunchide=     usr.sbin/crunch/crunchide
.endif
.if ${TARGET_ARCH} == "i386" && defined(RELEASEDIR)
_kgzip=         usr.sbin/kgzip
.endif
.endif

cross-tools:
.for _tool in \
    gnu/usr.bin/binutils \
    gnu/usr.bin/cc \
    usr.bin/sed \
    usr.bin/xlint/lint1 usr.bin/xlint/lint2 usr.bin/xlint/xlint \
    ${_btxld} \
    ${_crunchide} \
    ${_kgzip}
        ${_+_}@${ECHODIR} "===> ${_tool} (obj,depend,all,install)"; \
                cd ${.CURDIR}/${_tool}; \
                ${MAKE} DIRPRFX=${_tool}/ obj; \
                ${MAKE} DIRPRFX=${_tool}/ depend; \
                ${MAKE} DIRPRFX=${_tool}/ all; \
                ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX} install
.endfor

#
# hierarchy - ensure that all the needed directories are present
#
hierarchy:
        cd ${.CURDIR}/etc;              ${MAKE} distrib-dirs

#
# libraries - build all libraries, and install them under ${DESTDIR}.
#
# The list of libraries with dependents (${_prebuild_libs}) and their
# interdependencies (__L) are built automatically by the
# ${.CURDIR}/tools/make_libdeps.sh script.
#
libraries:
        cd ${.CURDIR}; \
            ${MAKE} -f Makefile.inc1 _prereq_libs; \
            ${MAKE} -f Makefile.inc1 _startup_libs; \
            ${MAKE} -f Makefile.inc1 _prebuild_libs; \
            ${MAKE} -f Makefile.inc1 _generic_libs;

#
# static libgcc.a prerequisite for shared libc
#
_prereq_libs= gnu/lib/libgcc

# These dependencies are not automatically generated:
#
# gnu/lib/csu, gnu/lib/libgcc, lib/csu and lib/libc must be built before
# all shared libraries for ELF.
#
_startup_libs=  gnu/lib/csu
.if exists(${.CURDIR}/lib/csu/${MACHINE_ARCH}-elf)
_startup_libs+= lib/csu/${MACHINE_ARCH}-elf
.else
_startup_libs+= lib/csu/${MACHINE_ARCH}
.endif
_startup_libs+= gnu/lib/libgcc
_startup_libs+= lib/libc

gnu/lib/libgcc__L: lib/libc__L

_prebuild_libs= ${_kerberos5_lib_libasn1} ${_kerberos5_lib_libkrb5} \
                ${_kerberos5_lib_libroken} \
                lib/libbz2 lib/libcom_err lib/libcrypt lib/libexpat \
                ${_lib_libgssapi} ${_lib_libipx} \
                lib/libkiconv lib/libkvm lib/libmd \
                lib/ncurses/ncurses lib/ncurses/ncursesw \
                lib/libopie lib/libpam ${_default_thread_lib} \
                lib/libradius lib/libsbuf lib/libtacplus lib/libutil \
                ${_lib_libypclnt} lib/libz lib/msun \
                ${_secure_lib_libcrypto} ${_secure_lib_libssh} \
                ${_secure_lib_libssl} lib/libsqlite3 lib/liblzma \
                lib/libarchive lib/libfetch

.if ${MK_LIBTHR} != "no" && ${MK_LIBKSE} != "no"
_default_thread_lib=    lib/${DEFAULT_THREAD_LIB}
.elif ${MK_LIBTHR} != "no"
_default_thread_lib=    lib/libthr
.elif ${MK_LIBKSE} != "no"
_default_thread_lib=    lib/libkse
.endif

_generic_libs=  ${_apache_lib} ${_cddl_lib} gnu/lib ${_kerberos5_lib} lib ${_secure_lib} usr.bin/lex/lib

lib/libopie__L lib/libtacplus__L: lib/libmd__L

.if ${MK_APACHE} != "no"
_apache_lib= apache/lib
.endif

.if ${MK_CDDL} != "no"
_cddl_lib= cddl/lib
.endif

.if ${MK_CRYPT} != "no"
.if ${MK_OPENSSL} != "no"
_secure_lib_libcrypto= secure/lib/libcrypto
_secure_lib_libssl= secure/lib/libssl
lib/libradius__L secure/lib/libssl__L: secure/lib/libcrypto__L
.if ${MK_OPENSSH} != "no"
_secure_lib_libssh= secure/lib/libssh
secure/lib/libssh__L: lib/libz__L secure/lib/libcrypto__L lib/libcrypt__L
.if ${MK_KERBEROS} != "no"
secure/lib/libssh__L: lib/libgssapi__L kerberos5/lib/libkrb5__L \
    kerberos5/lib/libasn1__L lib/libcom_err__L lib/libmd__L \
    kerberos5/lib/libroken__L
.endif
.endif
.endif
_secure_lib=    secure/lib
.endif

.if ${MK_IPX} != "no"
_lib_libipx=    lib/libipx
.endif

.if ${MK_KERBEROS} != "no"
_kerberos5_lib= kerberos5/lib
_kerberos5_lib_libasn1= kerberos5/lib/libasn1
_kerberos5_lib_libkrb5= kerberos5/lib/libkrb5
_kerberos5_lib_libroken= kerberos5/lib/libroken
_lib_libgssapi= lib/libgssapi
.endif

.if ${MK_NIS} != "no"
_lib_libypclnt= lib/libypclnt
.endif

.if ${MK_OPENSSL} == "no"
lib/libradius__L: lib/libmd__L
.endif

.for _lib in ${_prereq_libs}
${_lib}__PL: .PHONY
.if exists(${.CURDIR}/${_lib})
        ${_+_}@${ECHODIR} "===> ${_lib} (obj,depend,all,install)"; \
                cd ${.CURDIR}/${_lib}; \
                ${MAKE} DIRPRFX=${_lib}/ obj; \
                ${MAKE} DIRPRFX=${_lib}/ depend; \
                ${MAKE} -DWITHOUT_PROFILE -DNO_PIC DIRPRFX=${_lib}/ all; \
                ${MAKE} -DWITHOUT_PROFILE -DNO_PIC DIRPRFX=${_lib}/ install
.endif
.endfor

.for _lib in ${_startup_libs} ${_prebuild_libs:Nlib/libpam} ${_generic_libs}
${_lib}__L: .PHONY
.if exists(${.CURDIR}/${_lib})
        ${_+_}@${ECHODIR} "===> ${_lib} (obj,depend,all,install)"; \
                cd ${.CURDIR}/${_lib}; \
                ${MAKE} DIRPRFX=${_lib}/ obj; \
                ${MAKE} DIRPRFX=${_lib}/ depend; \
                ${MAKE} DIRPRFX=${_lib}/ all; \
                ${MAKE} DIRPRFX=${_lib}/ install
.endif
.endfor

# libpam is special: we need to build static PAM modules before
# static PAM library, and dynamic PAM library before dynamic PAM
# modules.
lib/libpam__L: .PHONY
        ${_+_}@${ECHODIR} "===> lib/libpam (obj,depend,all,install)"; \
                cd ${.CURDIR}/lib/libpam; \
                ${MAKE} DIRPRFX=lib/libpam/ obj; \
                ${MAKE} DIRPRFX=lib/libpam/ depend; \
                ${MAKE} DIRPRFX=lib/libpam/ -D_NO_LIBPAM_SO_YET all; \
                ${MAKE} DIRPRFX=lib/libpam/ -D_NO_LIBPAM_SO_YET install

_prereq_libs: ${_prereq_libs:S/$/__PL/}
_startup_libs: ${_startup_libs:S/$/__L/}
_prebuild_libs: ${_prebuild_libs:S/$/__L/}
_generic_libs: ${_generic_libs:S/$/__L/}

.for __target in all clean cleandepend cleandir depend includes obj
.for entry in ${SUBDIR}
${entry}.${__target}__D: .PHONY
        ${_+_}@if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \
                ${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH} (${__target})"; \
                edir=${entry}.${MACHINE_ARCH}; \
                cd ${.CURDIR}/$${edir}; \
        else \
                ${ECHODIR} "===> ${DIRPRFX}${entry} (${__target})"; \
                edir=${entry}; \
                cd ${.CURDIR}/$${edir}; \
        fi; \
        ${MAKE} ${__target} DIRPRFX=${DIRPRFX}$${edir}/
.endfor
par-${__target}: ${SUBDIR:S/$/.${__target}__D/}
.endfor

.include <bsd.subdir.mk>

.if make(check-old) || make(check-old-dirs) || \
    make(check-old-files) || make(check-old-libs) || \
    make(delete-old) || make(delete-old-dirs) || \
    make(delete-old-files) || make(delete-old-libs)

#
# check for / delete old files section
#

.include "ObsoleteFiles.inc"

OLD_LIBS_MESSAGE="Please be sure no application still uses those libraries, \
else you can not start such an application. Consult UPDATING for more \
information regarding how to cope with the removal/revision bump of a \
specific library."

.if !defined(BATCH_DELETE_OLD_FILES)
RM_I=-i
.else
RM_I=-v
.endif

delete-old-files:
        @echo ">>> Removing old files (only deletes safe to delete libs)"
# Ask for every old file if the user really wants to remove it.
# It's annoying, but better safe than sorry.
        @for file in ${OLD_FILES}; do \
                if [ -f "${DESTDIR}/$${file}" -o -L "${DESTDIR}/$${file}" ]; then \
                        chflags noschg "${DESTDIR}/$${file}" 2>/dev/null || true; \
                        rm ${RM_I} "${DESTDIR}/$${file}"; \
                fi; \
        done
# Remove catpages without corresponding manpages.
        @3<&0; \
        find ${DESTDIR}/usr/share/man/cat* ! -type d | \
        sed -ep -e's:${DESTDIR}/usr/share/man/cat:${DESTDIR}/usr/share/man/man:' | \
        while read catpage; do \
                read manpage; \
                if [ ! -e "$${manpage}" ]; then \
                        rm ${RM_I} $${catpage} <&3 ; \
                fi; \
        done
        @echo ">>> Old files removed"

check-old-files:
        @echo ">>> Checking for old files"
        @for file in ${OLD_FILES}; do \
                if [ -f "${DESTDIR}/$${file}" -o -L "${DESTDIR}/$${file}" ]; then \
                        echo "${DESTDIR}/$${file}"; \
                fi; \
        done
# Check for catpages without corresponding manpages.
        @find ${DESTDIR}/usr/share/man/cat* ! -type d | \
        sed -ep -e's:${DESTDIR}/usr/share/man/cat:${DESTDIR}/usr/share/man/man:' | \
        while read catpage; do \
                read manpage; \
                if [ ! -e "$${manpage}" ]; then \
                        echo $${catpage} ; \
                fi; \
        done

delete-old-libs:
        @echo ">>> Removing old libraries"
        @echo "${OLD_LIBS_MESSAGE}" | fmt
        @for file in ${OLD_LIBS}; do \
                if [ -f "${DESTDIR}/$${file}" -o -L "${DESTDIR}/$${file}" ]; then \
                        chflags noschg "${DESTDIR}/$${file}" 2>/dev/null || true; \
                        rm ${RM_I} "${DESTDIR}/$${file}"; \
                fi; \
        done
        @echo ">>> Old libraries removed"

check-old-libs:
        @echo ">>> Checking for old libraries"
        @for file in ${OLD_LIBS}; do \
                if [ -f "${DESTDIR}/$${file}" -o -L "${DESTDIR}/$${file}" ]; then \
                        echo "${DESTDIR}/$${file}"; \
                fi; \
        done

delete-old-dirs:
        @echo ">>> Removing old directories"
        @for dir in ${OLD_DIRS}; do \
                if [ -d "${DESTDIR}/$${dir}" ]; then \
                        rmdir -v "${DESTDIR}/$${dir}" || true; \
                elif [ -L "${DESTDIR}/$${dir}" ]; then \
                        echo "${DESTDIR}/$${dir} is a link, please remove everything manually."; \
                fi; \
        done
        @echo ">>> Old directories removed"

check-old-dirs:
        @echo ">>> Checking for old directories"
        @for dir in ${OLD_DIRS}; do \
                if [ -d "${DESTDIR}/$${dir}" ]; then \
                        echo "${DESTDIR}/$${dir}"; \
                elif [ -L "${DESTDIR}/$${dir}" ]; then \
                        echo "${DESTDIR}/$${dir} is a link, please remove everything manually."; \
                fi; \
        done

delete-old: delete-old-files delete-old-dirs
        @echo "To remove old libraries run '${MAKE} delete-old-libs'."

check-old: check-old-files check-old-libs check-old-dirs
        @echo "To remove old files and directories run '${MAKE} delete-old'."
        @echo "To remove old libraries run '${MAKE} delete-old-libs'."

.endif

#
# showconfig - show build configuration.
#
showconfig:
        @${MAKE} -n -f bsd.own.mk -V dummy -dg1 | grep ^MK_ | sort
Revision:	3883
Committed:	Sun Mar 13 17:16:38 2011 UTC (13 years, 1 month ago) by laffer1
File size:	37688 byte(s)
Log Message:	Build 32bit apache libs